diff options
Diffstat (limited to 'firmware/releases/release notes.txt')
| -rw-r--r-- | firmware/releases/release notes.txt | 17 |
1 files changed, 12 insertions, 5 deletions
diff --git a/firmware/releases/release notes.txt b/firmware/releases/release notes.txt index ae83338..18deb4f 100644 --- a/firmware/releases/release notes.txt +++ b/firmware/releases/release notes.txt @@ -1,11 +1,18 @@ +== 1.10rc3 - 2013-12-15 == +firmware: + o Major reorganization of the source and build system. + - Used own crt1.s to create vector table in the first flash-page. + - Removed all functions related to vector-table writing. + - Refactored code and inlined all functions that were only called once. + - Removed redundantly defined types to avoid confusion. Only C99 types are used now. + o Size is now 1878 bytes, 6314 bytes user space. No changes to functionality. + == 1.10rc2 - 2013-11-25 == firmware: o It seems that the USB specification does not define a maximum delay from device power up until the host issues a bus reset. Therefore too short delays AUTO_EXIT_NO_USB_MS can lead to the - bootloader exiting before enumeration on some systems. - Disabled AUTO_EXIT_NO_USB_MS in default configuration. Use the hex file with the "early_exit" postfix - if you need this feature. Set AUTO_EXIT_NO_USB_MS to 800ms. + bootloader exiting before enumeration on some systems. Disabled AUTO_EXIT_NO_USB_MS in default configuration. == 1.10rc1 - 2013-11-25 == @@ -21,10 +28,10 @@ Version jump to 1.10 due to major changes in firmware by @cpldcpu. o Cleaned up bootloaderconfig.h o Introduced a second time-out (AUTO_EXIT_NO_USB_MS) if no USB reset from the host is detected. This can be used to quit the bootloader early if the device is not connected to USB. The bootloader will enter the user - program after ~0.8s with the default settings instead of 6s when USB is connected. + program after ~0.8s with the default settings instead of 6s when USB is connected. o Introduced optional code to flash a LED. See LED_PRESENT in bootloaderconfig.h for details. Careful: Right now enabling the LED-code requires setting the bootloader base address to 0x1800 due - to increased code size. + to increased code size. == 1.06-jumper-v2 - 2013-5-20 == |