diff options
Diffstat (limited to 'os/common/ext')
38 files changed, 35504 insertions, 1 deletions
diff --git a/os/common/ext/CMSIS/KINETIS/k20xx.h b/os/common/ext/CMSIS/KINETIS/k20xx.h index 38855aa..8218b3c 100644 --- a/os/common/ext/CMSIS/KINETIS/k20xx.h +++ b/os/common/ext/CMSIS/KINETIS/k20xx.h @@ -2242,7 +2242,7 @@ typedef struct /******** Bits definition for USBx_CTL register *****************/ #define USBx_CTL_JSTATE ((uint8_t)0x80) /*!< Live USB differential receiver JSTATE signal */ #define USBx_CTL_SE0 ((uint8_t)0x40) /*!< Live USB single ended zero signal */ -#define USBx_CTL_TXSUSPENDTOKENBUS ((uint8_t)0x20) /*!< */ +#define USBx_CTL_TXSUSPENDTOKENBUSY ((uint8_t)0x20) /*!< */ #define USBx_CTL_RESET ((uint8_t)0x10) /*!< Generates an USB reset signal (host mode) */ #define USBx_CTL_HOSTMODEEN ((uint8_t)0x08) /*!< Operate in Host mode */ #define USBx_CTL_RESUME ((uint8_t)0x04) /*!< Executes resume signaling */ diff --git a/os/common/ext/MSP430/inc/in430.h b/os/common/ext/MSP430/inc/in430.h new file mode 100644 index 0000000..f907209 --- /dev/null +++ b/os/common/ext/MSP430/inc/in430.h @@ -0,0 +1,343 @@ +/******************************************************************************* + * in430.h - + * + * Copyright (C) 2003-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the + * distribution. + * + * Neither the name of Texas Instruments Incorporated nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ******************************************************************************/ + +#ifndef __IN430_H__ +#define __IN430_H__ + +/* Definitions for projects using the GNU C/C++ compiler */ +#if !defined(__ASSEMBLER__) + +/* Definitions of things which are intrinsics with IAR and CCS, but which don't + appear to be intrinsics with the RedHat GCC compiler */ + +/* The data type used to hold interrupt state */ +typedef unsigned int __istate_t; + +#define _no_operation() __asm__ __volatile__ ("nop") + +#define _get_interrupt_state() \ +({ \ + unsigned int __x; \ + __asm__ __volatile__( \ + "mov SR, %0" \ + : "=r" ((unsigned int) __x) \ + :); \ + __x; \ +}) + +#if defined(__MSP430_HAS_MSP430XV2_CPU__) || defined(__MSP430_HAS_MSP430X_CPU__) +#define _set_interrupt_state(x) \ +({ \ + __asm__ __volatile__ ("mov %0, SR { nop" \ + : : "ri"((unsigned int) x) \ + );\ +}) + +#define _enable_interrupts() __asm__ __volatile__ ("nop { eint { nop") + +#define _bis_SR_register(x) \ + __asm__ __volatile__ ("bis.w %0, SR { nop" \ + : : "ri"((unsigned int) x) \ + ) +#else + +#define _set_interrupt_state(x) \ +({ \ + __asm__ __volatile__ ("mov %0, SR" \ + : : "ri"((unsigned int) x) \ + );\ +}) + +#define _enable_interrupts() __asm__ __volatile__ ("eint { nop") + +#define _bis_SR_register(x) \ + __asm__ __volatile__ ("bis.w %0, SR" \ + : : "ri"((unsigned int) x) \ + ) + +#endif + +#define _disable_interrupts() __asm__ __volatile__ ("dint { nop") + +#define _bic_SR_register(x) \ + __asm__ __volatile__ ("bic.w %0, SR { nop" \ + : : "ri"((unsigned int) x) \ + ) + +#define _get_SR_register() \ +({ \ + unsigned int __x; \ + __asm__ __volatile__( \ + "mov SR, %0" \ + : "=r" ((unsigned int) __x) \ + :); \ + __x; \ +}) + +#define _swap_bytes(x) \ +({ \ + unsigned int __dst = x; \ + __asm__ __volatile__( \ + "swpb %0" \ + : "+r" ((unsigned int) __dst) \ + :); \ + __dst; \ +}) + +/* Alternative names for GCC built-ins */ +#define _bic_SR_register_on_exit(x) __bic_SR_register_on_exit(x) +#define _bis_SR_register_on_exit(x) __bis_SR_register_on_exit(x) + +/* Additional intrinsics provided for IAR/CCS compatibility */ +#define _bcd_add_short(x,y) \ +({ \ + unsigned short __z = ((unsigned short) y); \ + __asm__ __volatile__( \ + "clrc \n\t" \ + "dadd.w %1, %0" \ + : "+r" ((unsigned short) __z) \ + : "ri" ((unsigned short) x) \ + ); \ + __z; \ +}) + +#define __bcd_add_short(x,y) _bcd_add_short(x,y) + +#define _bcd_add_long(x,y) \ +({ \ + unsigned long __z = ((unsigned long) y); \ + __asm__ __volatile__( \ + "clrc \n\t" \ + "dadd.w %L1, %L0 \n\t" \ + "dadd.w %H1, %H0" \ + : "+r" ((unsigned long) __z) \ + : "ri" ((unsigned long) x) \ + ); \ + __z; \ + }) + +#define __bcd_add_long(x,y) _bcd_add_long(x,y) + +#define _get_SP_register() \ +({ \ + unsigned int __x; \ + __asm__ __volatile__( \ + "mov SP, %0" \ + : "=r" ((unsigned int) __x) \ + :); \ + __x; \ +}) + +#define __get_SP_register() _get_SP_register() + +#define _set_SP_register(x) \ +({ \ + __asm__ __volatile__ ("mov %0, SP" \ + : : "ri"((unsigned int) x) \ + );\ +}) + +#define __set_SP_register(x) _set_SP_register(x) + +#define _data16_write_addr(addr,src) \ +({ \ + unsigned long __src = src; \ + __asm__ __volatile__ ( \ + "movx.a %1, 0(%0)" \ + : : "r"((unsigned int) addr), "m"((unsigned long) __src) \ + ); \ +}) + +#define __data16_write_addr(addr,src) _data16_write_addr(addr,src) + +#define _data16_read_addr(addr) \ +({ \ + unsigned long __dst; \ + __asm__ __volatile__ ( \ + "movx.a @%1, %0" \ + : "=m"((unsigned long) __dst) \ + : "r"((unsigned int) addr) \ + ); \ + __dst; \ +}) + +#define __data16_read_addr(addr) _data16_read_addr(addr) + +#define _data20_write_char(addr,src) \ +({ \ + unsigned int __tmp; \ + unsigned long __addr = addr; \ + __asm__ __volatile__ ( \ + "movx.a %1, %0 \n\t" \ + "mov.b %2, 0(%0)" \ + : "=&r"((unsigned int) __tmp) \ + : "m"((unsigned long) __addr), "ri"((char) src) \ + ); \ +}) + +#define __data20_write_char(addr,src) _data20_write_char(addr,src) + +#define _data20_read_char(addr) \ +({ \ + char __dst; \ + unsigned int __tmp; \ + unsigned long __addr = addr; \ + __asm__ __volatile__ ( \ + "movx.a %2, %1 \n\t" \ + "mov.b 0(%1), %0" \ + : "=r"((char) __dst), "=&r"((unsigned int) __tmp) \ + : "m"((unsigned long) __addr) \ + ); \ + __dst ; \ +}) + +#define __data20_read_char(addr) _data20_read_char(addr) + +#define _data20_write_short(addr,src) \ +({ \ + unsigned int __tmp; \ + unsigned long __addr = addr; \ + __asm__ __volatile__ ( \ + "movx.a %1, %0 \n\t" \ + "mov.w %2, 0(%0)" \ + : "=&r"((unsigned int) __tmp) \ + : "m"((unsigned long) __addr), "ri"((short) src) \ + ); \ +}) + +#define __data20_write_short(addr,src) _data20_write_short(addr,src) + +#define _data20_read_short(addr) \ +({ \ + short __dst; \ + unsigned int __tmp; \ + unsigned long __addr = addr; \ + __asm__ __volatile__ ( \ + "movx.a %2, %1 \n\t" \ + "mov.w 0(%1), %0" \ + : "=r"((short) __dst), "=&r"((unsigned int) __tmp) \ + : "m"((unsigned long) __addr) \ + ); \ + __dst ; \ +}) + +#define __data20_read_short(addr) _data20_read_short(addr) + +#define _data20_write_long(addr,src) \ +({ \ + unsigned int __tmp; \ + unsigned long __addr = addr; \ + __asm__ __volatile__ ( \ + "movx.a %1, %0 \n\t" \ + "mov.w %L2, 0(%0) \n\t" \ + "mov.w %H2, 2(%0)" \ + : "=&r"((unsigned int) __tmp) \ + : "m"((unsigned long) __addr), "ri"((long) src) \ + ); \ +}) + +#define __data20_write_long(addr,src) _data20_write_long(addr,src) + +#define _data20_read_long(addr) \ +({ \ + long __dst; \ + unsigned int __tmp; \ + unsigned long __addr = addr; \ + __asm__ __volatile__ ( \ + "movx.a %2, %1 \n\t" \ + "mov.w 0(%1), %L0 \n\t" \ + "mov.w 2(%1), %H0" \ + : "=r"((long) __dst), "=&r"((unsigned int) __tmp) \ + : "m"((unsigned long) __addr) \ + ); \ + __dst ; \ +}) + +#define __data20_read_long(addr) _data20_read_long(addr) + +#define _low_power_mode_0() _bis_SR_register(0x18) +#define _low_power_mode_1() _bis_SR_register(0x58) +#define _low_power_mode_2() _bis_SR_register(0x98) +#define _low_power_mode_3() _bis_SR_register(0xD8) +#define _low_power_mode_4() _bis_SR_register(0xF8) +#define _low_power_mode_off_on_exit() _bic_SR_register_on_exit(0xF0) + +#define __low_power_mode_0() _low_power_mode_0() +#define __low_power_mode_1() _low_power_mode_1() +#define __low_power_mode_2() _low_power_mode_2() +#define __low_power_mode_3() _low_power_mode_3() +#define __low_power_mode_4() _low_power_mode_4() +#define __low_power_mode_off_on_exit() _low_power_mode_off_on_exit() + +#define _even_in_range(x,y) (x) +#define __even_in_range(x,y) _even_in_range(x,y) + +/* Define some alternative names for the intrinsics, which have been used + in the various versions of IAR and GCC */ +#define __no_operation() _no_operation() + +#define __get_interrupt_state() _get_interrupt_state() +#define __set_interrupt_state(x) _set_interrupt_state(x) +#define __enable_interrupt() _enable_interrupts() +#define __disable_interrupt() _disable_interrupts() + +#define __bic_SR_register(x) _bic_SR_register(x) +#define __bis_SR_register(x) _bis_SR_register(x) +#define __get_SR_register() _get_SR_register() + +#define __swap_bytes(x) _swap_bytes(x) + +#define __nop() _no_operation() + +#define __eint() _enable_interrupts() +#define __dint() _disable_interrupts() + +#define _NOP() _no_operation() +#define _EINT() _enable_interrupts() +#define _DINT() _disable_interrupts() + +#define _BIC_SR(x) _bic_SR_register(x) +#define _BIC_SR_IRQ(x) _bic_SR_register_on_exit(x) +#define _BIS_SR(x) _bis_SR_register(x) +#define _BIS_SR_IRQ(x) _bis_SR_register_on_exit(x) +#define _BIS_NMI_IE1(x) _bis_nmi_ie1(x) + +#define _SWAP_BYTES(x) _swap_bytes(x) + +#define __no_init __attribute__ ((section (".noinit"))) + +#endif /* !defined _GNU_ASSEMBLER_ */ + +#endif /* __IN430_H__ */ diff --git a/os/common/ext/MSP430/inc/iomacros.h b/os/common/ext/MSP430/inc/iomacros.h new file mode 100644 index 0000000..fc0e76d --- /dev/null +++ b/os/common/ext/MSP430/inc/iomacros.h @@ -0,0 +1,85 @@ +/******************************************************************************* + * iomacros.h - + * + * Copyright (C) 2003-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the + * distribution. + * + * Neither the name of Texas Instruments Incorporated nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ******************************************************************************/ + +#if !defined(_IOMACROS_H_) +#define _IOMACROS_H_ + + +#if defined(__ASSEMBLER__) + +/* Definitions for assembly compilation using the GNU assembler */ +#define sfrb(x,x_) x=x_ +#define sfrw(x,x_) x=x_ +#define sfra(x,x_) x=x_ +#define sfrl(x,x_) x=x_ + +#define const_sfrb(x,x_) x=x_ +#define const_sfrw(x,x_) x=x_ +#define const_sfra(x,x_) x=x_ +#define const_sfrl(x,x_) x=x_ + +#define sfr_b(x) +#define sfr_w(x) +#define sfr_a(x) +#define sfr_l(x) + +#else + +#define sfr_b(x) extern volatile unsigned char x +#define sfr_w(x) extern volatile unsigned int x +#define sfr_a(x) extern volatile unsigned long int x +#define sfr_l(x) extern volatile unsigned long int x + +#define sfrb_(x,x_) extern volatile unsigned char x __asm__(#x_) +#define sfrw_(x,x_) extern volatile unsigned int x __asm__(#x_) +#define sfra_(x,x_) extern volatile unsigned long int x __asm__(#x_) +#define sfrl_(x,x_) extern volatile unsigned long int x __asm__(#x_) + +#define sfrb(x,x_) sfrb_(x,x_) +#define sfrw(x,x_) sfrw_(x,x_) +#define sfra(x,x_) sfra_(x,x_) +#define sfrl(x,x_) sfrl_(x,x_) + +#define const_sfrb(x,x_) const sfrb_(x,x_) +#define const_sfrw(x,x_) const sfrw_(x,x_) +#define const_sfra(x,x_) const sfra_(x,x_) +#define const_sfrl(x,x_) const sfrl_(x,x_) + +#define __interrupt __attribute__((__interrupt__)) +#define __interrupt_vec(vec) __attribute__((interrupt(vec))) + +#endif /* defined(__ASSEMBLER__) */ + +#endif /* _IOMACROS_H_ */ diff --git a/os/common/ext/MSP430/inc/msp430.h b/os/common/ext/MSP430/inc/msp430.h new file mode 100755 index 0000000..40f8759 --- /dev/null +++ b/os/common/ext/MSP430/inc/msp430.h @@ -0,0 +1,1847 @@ +/******************************************************************* +* * +* This file is a generic include file controlled by * +* compiler/assembler IDE generated defines * +* * +*******************************************************************/ + +#ifndef __msp430 +#define __msp430 + + +#if defined (__MSP430C111__) +#include "msp430c111.h" + +#elif defined (__MSP430C1111__) +#include "msp430c1111.h" + +#elif defined (__MSP430C112__) +#include "msp430c112.h" + +#elif defined (__MSP430C1121__) +#include "msp430c1121.h" + +#elif defined (__MSP430C1331__) +#include "msp430c1331.h" + +#elif defined (__MSP430C1351__) +#include "msp430c1351.h" + +#elif defined (__MSP430C311S__) +#include "msp430c311s.h" + +#elif defined (__MSP430C312__) +#include "msp430c312.h" + +#elif defined (__MSP430C313__) +#include "msp430c313.h" + +#elif defined (__MSP430C314__) +#include "msp430c314.h" + +#elif defined (__MSP430C315__) +#include "msp430c315.h" + +#elif defined (__MSP430C323__) +#include "msp430c323.h" + +#elif defined (__MSP430C325__) +#include "msp430c325.h" + +#elif defined (__MSP430C336__) +#include "msp430c336.h" + +#elif defined (__MSP430C337__) +#include "msp430c337.h" + +#elif defined (__MSP430C412__) +#include "msp430c412.h" + +#elif defined (__MSP430C413__) +#include "msp430c413.h" + +#elif defined (__MSP430CG4616__) +#include "msp430cg4616.h" + +#elif defined (__MSP430CG4617__) +#include "msp430cg4617.h" + +#elif defined (__MSP430CG4618__) +#include "msp430cg4618.h" + +#elif defined (__MSP430CG4619__) +#include "msp430cg4619.h" + +#elif defined (__MSP430E112__) +#include "msp430e112.h" + +#elif defined (__MSP430E313__) +#include "msp430e313.h" + +#elif defined (__MSP430E315__) +#include "msp430e315.h" + +#elif defined (__MSP430E325__) +#include "msp430e325.h" + +#elif defined (__MSP430E337__) +#include "msp430e337.h" + +#elif defined (__MSP430F110__) +#include "msp430f110.h" + +#elif defined (__MSP430F1101__) +#include "msp430f1101.h" + +#elif defined (__MSP430F1101A__) +#include "msp430f1101a.h" + +#elif defined (__MSP430F1111__) +#include "msp430f1111.h" + +#elif defined (__MSP430F1111A__) +#include "msp430f1111a.h" + +#elif defined (__MSP430F112__) +#include "msp430f112.h" + +#elif defined (__MSP430F1121__) +#include "msp430f1121.h" + +#elif defined (__MSP430F1121A__) +#include "msp430f1121a.h" + +#elif defined (__MSP430F1122__) +#include "msp430f1122.h" + +#elif defined (__MSP430F1132__) +#include "msp430f1132.h" + +#elif defined (__MSP430F122__) +#include "msp430f122.h" + +#elif defined (__MSP430F1222__) +#include "msp430f1222.h" + +#elif defined (__MSP430F123__) +#include "msp430f123.h" + +#elif defined (__MSP430F1232__) +#include "msp430f1232.h" + +#elif defined (__MSP430F133__) +#include "msp430f133.h" + +#elif defined (__MSP430F135__) +#include "msp430f135.h" + +#elif defined (__MSP430F147__) +#include "msp430f147.h" + +#elif defined (__MSP430F148__) +#include "msp430f148.h" + +#elif defined (__MSP430F149__) +#include "msp430f149.h" + +#elif defined (__MSP430F1471__) +#include "msp430f1471.h" + +#elif defined (__MSP430F1481__) +#include "msp430f1481.h" + +#elif defined (__MSP430F1491__) +#include "msp430f1491.h" + +#elif defined (__MSP430F155__) +#include "msp430f155.h" + +#elif defined (__MSP430F156__) +#include "msp430f156.h" + +#elif defined (__MSP430F157__) +#include "msp430f157.h" + +#elif defined (__MSP430F167__) +#include "msp430f167.h" + +#elif defined (__MSP430F168__) +#include "msp430f168.h" + +#elif defined (__MSP430F169__) +#include "msp430f169.h" + +#elif defined (__MSP430F1610__) +#include "msp430f1610.h" + +#elif defined (__MSP430F1611__) +#include "msp430f1611.h" + +#elif defined (__MSP430F1612__) +#include "msp430f1612.h" + +#elif defined (__MSP430F2001__) +#include "msp430f2001.h" + +#elif defined (__MSP430F2011__) +#include "msp430f2011.h" + +#elif defined (__MSP430F2002__) +#include "msp430f2002.h" + +#elif defined (__MSP430F2012__) +#include "msp430f2012.h" + +#elif defined (__MSP430F2003__) +#include "msp430f2003.h" + +#elif defined (__MSP430F2013__) +#include "msp430f2013.h" + +#elif defined (__MSP430F2101__) +#include "msp430f2101.h" + +#elif defined (__MSP430F2111__) +#include "msp430f2111.h" + +#elif defined (__MSP430F2121__) +#include "msp430f2121.h" + +#elif defined (__MSP430F2131__) +#include "msp430f2131.h" + +#elif defined (__MSP430F2112__) +#include "msp430f2112.h" + +#elif defined (__MSP430F2122__) +#include "msp430f2122.h" + +#elif defined (__MSP430F2132__) +#include "msp430f2132.h" + +#elif defined (__MSP430F2232__) +#include "msp430f2232.h" + +#elif defined (__MSP430F2252__) +#include "msp430f2252.h" + +#elif defined (__MSP430F2272__) +#include "msp430f2272.h" + +#elif defined (__MSP430F2234__) +#include "msp430f2234.h" + +#elif defined (__MSP430F2254__) +#include "msp430f2254.h" + +#elif defined (__MSP430F2274__) +#include "msp430f2274.h" + +#elif defined (__MSP430F2330__) +#include "msp430f2330.h" + +#elif defined (__MSP430F2350__) +#include "msp430f2350.h" + +#elif defined (__MSP430F2370__) +#include "msp430f2370.h" + +#elif defined (__MSP430F233__) +#include "msp430f233.h" + +#elif defined (__MSP430F235__) +#include "msp430f235.h" + +#elif defined (__MSP430F247__) +#include "msp430f247.h" + +#elif defined (__MSP430F248__) +#include "msp430f248.h" + +#elif defined (__MSP430F249__) +#include "msp430f249.h" + +#elif defined (__MSP430F2410__) +#include "msp430f2410.h" + +#elif defined (__MSP430F2471__) +#include "msp430f2471.h" + +#elif defined (__MSP430F2481__) +#include "msp430f2481.h" + +#elif defined (__MSP430F2491__) +#include "msp430f2491.h" + +#elif defined (__MSP430F2416__) +#include "msp430f2416.h" + +#elif defined (__MSP430F2417__) +#include "msp430f2417.h" + +#elif defined (__MSP430F2418__) +#include "msp430f2418.h" + +#elif defined (__MSP430F2419__) +#include "msp430f2419.h" + +#elif defined (__MSP430F2616__) +#include "msp430f2616.h" + +#elif defined (__MSP430F2617__) +#include "msp430f2617.h" + +#elif defined (__MSP430F2618__) +#include "msp430f2618.h" + +#elif defined (__MSP430F2619__) +#include "msp430f2619.h" + +#elif defined (__MSP430F412__) +#include "msp430f412.h" + +#elif defined (__MSP430F413__) +#include "msp430f413.h" + +#elif defined (__MSP430F415__) +#include "msp430f415.h" + +#elif defined (__MSP430F417__) +#include "msp430f417.h" + +#elif defined (__MSP430F4132__) +#include "msp430f4132.h" + +#elif defined (__MSP430F4152__) +#include "msp430f4152.h" + +#elif defined (__MSP430F423__) +#include "msp430f423.h" + +#elif defined (__MSP430F425__) +#include "msp430f425.h" + +#elif defined (__MSP430F427__) +#include "msp430f427.h" + +#elif defined (__MSP430F423A__) +#include "msp430f423a.h" + +#elif defined (__MSP430F425A__) +#include "msp430f425a.h" + +#elif defined (__MSP430F427A__) +#include "msp430f427a.h" + +#elif defined (__MSP430F435__) +#include "msp430f435.h" + +#elif defined (__MSP430F436__) +#include "msp430f436.h" + +#elif defined (__MSP430F437__) +#include "msp430f437.h" + +#elif defined (__MSP430F4351__) +#include "msp430f4351.h" + +#elif defined (__MSP430F4361__) +#include "msp430f4361.h" + +#elif defined (__MSP430F4371__) +#include "msp430f4371.h" + +#elif defined (__MSP430F4481__) +#include "msp430f4481.h" + +#elif defined (__MSP430F4491__) +#include "msp430f4491.h" + +#elif defined (__MSP430F447__) +#include "msp430f447.h" + +#elif defined (__MSP430F448__) +#include "msp430f448.h" + +#elif defined (__MSP430F449__) +#include "msp430f449.h" + +#elif defined (__MSP430FE423__) +#include "msp430fe423.h" + +#elif defined (__MSP430FE425__) +#include "msp430fe425.h" + +#elif defined (__MSP430FE427__) +#include "msp430fe427.h" + +#elif defined (__MSP430FE423A__) +#include "msp430fe423a.h" + +#elif defined (__MSP430FE425A__) +#include "msp430fe425a.h" + +#elif defined (__MSP430FE427A__) +#include "msp430fe427a.h" + +#elif defined (__MSP430FE4232__) +#include "msp430fe4232.h" + +#elif defined (__MSP430FE4242__) +#include "msp430fe4242.h" + +#elif defined (__MSP430FE4252__) +#include "msp430fe4252.h" + +#elif defined (__MSP430FE4272__) +#include "msp430fe4272.h" + +#elif defined (__MSP430F4783__) +#include "msp430f4783.h" + +#elif defined (__MSP430F4793__) +#include "msp430f4793.h" + +#elif defined (__MSP430F4784__) +#include "msp430f4784.h" + +#elif defined (__MSP430F4794__) +#include "msp430f4794.h" + +#elif defined (__MSP430F47126__) +#include "msp430f47126.h" + +#elif defined (__MSP430F47127__) +#include "msp430f47127.h" + +#elif defined (__MSP430F47163__) +#include "msp430f47163.h" + +#elif defined (__MSP430F47173__) +#include "msp430f47173.h" + +#elif defined (__MSP430F47183__) +#include "msp430f47183.h" + +#elif defined (__MSP430F47193__) +#include "msp430f47193.h" + +#elif defined (__MSP430F47166__) +#include "msp430f47166.h" + +#elif defined (__MSP430F47176__) +#include "msp430f47176.h" + +#elif defined (__MSP430F47186__) +#include "msp430f47186.h" + +#elif defined (__MSP430F47196__) +#include "msp430f47196.h" + +#elif defined (__MSP430F47167__) +#include "msp430f47167.h" + +#elif defined (__MSP430F47177__) +#include "msp430f47177.h" + +#elif defined (__MSP430F47187__) +#include "msp430f47187.h" + +#elif defined (__MSP430F47197__) +#include "msp430f47197.h" + +#elif defined (__MSP430F4250__) +#include "msp430f4250.h" + +#elif defined (__MSP430F4260__) +#include "msp430f4260.h" + +#elif defined (__MSP430F4270__) +#include "msp430f4270.h" + +#elif defined (__MSP430FG4250__) +#include "msp430fg4250.h" + +#elif defined (__MSP430FG4260__) +#include "msp430fg4260.h" + +#elif defined (__MSP430FG4270__) +#include "msp430fg4270.h" + +#elif defined (__MSP430FW423__) +#include "msp430fw423.h" + +#elif defined (__MSP430FW425__) +#include "msp430fw425.h" + +#elif defined (__MSP430FW427__) +#include "msp430fw427.h" + +#elif defined (__MSP430FW428__) +#include "msp430fw428.h" + +#elif defined (__MSP430FW429__) +#include "msp430fw429.h" + +#elif defined (__MSP430FG437__) +#include "msp430fg437.h" + +#elif defined (__MSP430FG438__) +#include "msp430fg438.h" + +#elif defined (__MSP430FG439__) +#include "msp430fg439.h" + +#elif defined (__MSP430F438__) +#include "msp430f438.h" + +#elif defined (__MSP430F439__) +#include "msp430f439.h" + +#elif defined (__MSP430F477__) +#include "msp430f477.h" + +#elif defined (__MSP430F478__) +#include "msp430f478.h" + +#elif defined (__MSP430F479__) +#include "msp430f479.h" + +#elif defined (__MSP430FG477__) +#include "msp430fg477.h" + +#elif defined (__MSP430FG478__) +#include "msp430fg478.h" + +#elif defined (__MSP430FG479__) +#include "msp430fg479.h" + +#elif defined (__MSP430F46161__) +#include "msp430f46161.h" + +#elif defined (__MSP430F46171__) +#include "msp430f46171.h" + +#elif defined (__MSP430F46181__) +#include "msp430f46181.h" + +#elif defined (__MSP430F46191__) +#include "msp430f46191.h" + +#elif defined (__MSP430F4616__) +#include "msp430f4616.h" + +#elif defined (__MSP430F4617__) +#include "msp430f4617.h" + +#elif defined (__MSP430F4618__) +#include "msp430f4618.h" + +#elif defined (__MSP430F4619__) +#include "msp430f4619.h" + +#elif defined (__MSP430FG4616__) +#include "msp430fg4616.h" + +#elif defined (__MSP430FG4617__) +#include "msp430fg4617.h" + +#elif defined (__MSP430FG4618__) +#include "msp430fg4618.h" + +#elif defined (__MSP430FG4619__) +#include "msp430fg4619.h" + +#elif defined (__MSP430F5418__) +#include "msp430f5418.h" + +#elif defined (__MSP430F5419__) +#include "msp430f5419.h" + +#elif defined (__MSP430F5435__) +#include "msp430f5435.h" + +#elif defined (__MSP430F5436__) +#include "msp430f5436.h" + +#elif defined (__MSP430F5437__) +#include "msp430f5437.h" + +#elif defined (__MSP430F5438__) +#include "msp430f5438.h" + +#elif defined (__MSP430F5418A__) +#include "msp430f5418a.h" + +#elif defined (__MSP430F5419A__) +#include "msp430f5419a.h" + +#elif defined (__MSP430F5435A__) +#include "msp430f5435a.h" + +#elif defined (__MSP430F5436A__) +#include "msp430f5436a.h" + +#elif defined (__MSP430F5437A__) +#include "msp430f5437a.h" + +#elif defined (__MSP430F5438A__) +#include "msp430f5438a.h" + +#elif defined (__MSP430F5212__) +#include "msp430f5212.h" + +#elif defined (__MSP430F5213__) +#include "msp430f5213.h" + +#elif defined (__MSP430F5214__) +#include "msp430f5214.h" + +#elif defined (__MSP430F5217__) +#include "msp430f5217.h" + +#elif defined (__MSP430F5218__) +#include "msp430f5218.h" + +#elif defined (__MSP430F5219__) +#include "msp430f5219.h" + +#elif defined (__MSP430F5222__) +#include "msp430f5222.h" + +#elif defined (__MSP430F5223__) +#include "msp430f5223.h" + +#elif defined (__MSP430F5224__) +#include "msp430f5224.h" + +#elif defined (__MSP430F5227__) +#include "msp430f5227.h" + +#elif defined (__MSP430F5228__) +#include "msp430f5228.h" + +#elif defined (__MSP430F5229__) +#include "msp430f5229.h" + +#elif defined (__MSP430F5232__) +#include "msp430f5232.h" + +#elif defined (__MSP430F5234__) +#include "msp430f5234.h" + +#elif defined (__MSP430F5237__) +#include "msp430f5237.h" + +#elif defined (__MSP430F5239__) +#include "msp430f5239.h" + +#elif defined (__MSP430F5242__) +#include "msp430f5242.h" + +#elif defined (__MSP430F5244__) +#include "msp430f5244.h" + +#elif defined (__MSP430F5247__) +#include "msp430f5247.h" + +#elif defined (__MSP430F5249__) +#include "msp430f5249.h" + +#elif defined (__MSP430F5304__) +#include "msp430f5304.h" + +#elif defined (__MSP430F5308__) +#include "msp430f5308.h" + +#elif defined (__MSP430F5309__) +#include "msp430f5309.h" + +#elif defined (__MSP430F5310__) +#include "msp430f5310.h" + +#elif defined (__MSP430F5340__) +#include "msp430f5340.h" + +#elif defined (__MSP430F5341__) +#include "msp430f5341.h" + +#elif defined (__MSP430F5342__) +#include "msp430f5342.h" + +#elif defined (__MSP430F5324__) +#include "msp430f5324.h" + +#elif defined (__MSP430F5325__) +#include "msp430f5325.h" + +#elif defined (__MSP430F5326__) +#include "msp430f5326.h" + +#elif defined (__MSP430F5327__) +#include "msp430f5327.h" + +#elif defined (__MSP430F5328__) +#include "msp430f5328.h" + +#elif defined (__MSP430F5329__) +#include "msp430f5329.h" + +#elif defined (__MSP430F5500__) +#include "msp430f5500.h" + +#elif defined (__MSP430F5501__) +#include "msp430f5501.h" + +#elif defined (__MSP430F5502__) +#include "msp430f5502.h" + +#elif defined (__MSP430F5503__) +#include "msp430f5503.h" + +#elif defined (__MSP430F5504__) +#include "msp430f5504.h" + +#elif defined (__MSP430F5505__) +#include "msp430f5505.h" + +#elif defined (__MSP430F5506__) +#include "msp430f5506.h" + +#elif defined (__MSP430F5507__) +#include "msp430f5507.h" + +#elif defined (__MSP430F5508__) +#include "msp430f5508.h" + +#elif defined (__MSP430F5509__) +#include "msp430f5509.h" + +#elif defined (__MSP430F5510__) +#include "msp430f5510.h" + +#elif defined (__MSP430F5513__) +#include "msp430f5513.h" + +#elif defined (__MSP430F5514__) +#include "msp430f5514.h" + +#elif defined (__MSP430F5515__) +#include "msp430f5515.h" + +#elif defined (__MSP430F5517__) +#include "msp430f5517.h" + +#elif defined (__MSP430F5519__) +#include "msp430f5519.h" + +#elif defined (__MSP430F5521__) +#include "msp430f5521.h" + +#elif defined (__MSP430F5522__) +#include "msp430f5522.h" + +#elif defined (__MSP430F5524__) +#include "msp430f5524.h" + +#elif defined (__MSP430F5525__) +#include "msp430f5525.h" + +#elif defined (__MSP430F5526__) +#include "msp430f5526.h" + +#elif defined (__MSP430F5527__) +#include "msp430f5527.h" + +#elif defined (__MSP430F5528__) +#include "msp430f5528.h" + +#elif defined (__MSP430F5529__) +#include "msp430f5529.h" + +#elif defined (__MSP430P112__) +#include "msp430p112.h" + +#elif defined (__MSP430P313__) +#include "msp430p313.h" + +#elif defined (__MSP430P315__) +#include "msp430p315.h" + +#elif defined (__MSP430P315S__) +#include "msp430p315s.h" + +#elif defined (__MSP430P325__) +#include "msp430p325.h" + +#elif defined (__MSP430P337__) +#include "msp430p337.h" + +#elif defined (__CC430F5133__) +#include "cc430f5133.h" + +#elif defined (__CC430F5135__) +#include "cc430f5135.h" + +#elif defined (__CC430F5137__) +#include "cc430f5137.h" + +#elif defined (__CC430F6125__) +#include "cc430f6125.h" + +#elif defined (__CC430F6126__) +#include "cc430f6126.h" + +#elif defined (__CC430F6127__) +#include "cc430f6127.h" + +#elif defined (__CC430F6135__) +#include "cc430f6135.h" + +#elif defined (__CC430F6137__) +#include "cc430f6137.h" + +#elif defined (__CC430F5123__) +#include "cc430f5123.h" + +#elif defined (__CC430F5125__) +#include "cc430f5125.h" + +#elif defined (__CC430F5143__) +#include "cc430f5143.h" + +#elif defined (__CC430F5145__) +#include "cc430f5145.h" + +#elif defined (__CC430F5147__) +#include "cc430f5147.h" + +#elif defined (__CC430F6143__) +#include "cc430f6143.h" + +#elif defined (__CC430F6145__) +#include "cc430f6145.h" + +#elif defined (__CC430F6147__) +#include "cc430f6147.h" + +#elif defined (__MSP430F5333__) +#include "msp430f5333.h" + +#elif defined (__MSP430F5335__) +#include "msp430f5335.h" + +#elif defined (__MSP430F5336__) +#include "msp430f5336.h" + +#elif defined (__MSP430F5338__) +#include "msp430f5338.h" + +#elif defined (__MSP430F5630__) +#include "msp430f5630.h" + +#elif defined (__MSP430F5631__) +#include "msp430f5631.h" + +#elif defined (__MSP430F5632__) +#include "msp430f5632.h" + +#elif defined (__MSP430F5633__) +#include "msp430f5633.h" + +#elif defined (__MSP430F5634__) +#include "msp430f5634.h" + +#elif defined (__MSP430F5635__) +#include "msp430f5635.h" + +#elif defined (__MSP430F5636__) +#include "msp430f5636.h" + +#elif defined (__MSP430F5637__) +#include "msp430f5637.h" + +#elif defined (__MSP430F5638__) +#include "msp430f5638.h" + +#elif defined (__MSP430F6433__) +#include "msp430f6433.h" + +#elif defined (__MSP430F6435__) +#include "msp430f6435.h" + +#elif defined (__MSP430F6436__) +#include "msp430f6436.h" + +#elif defined (__MSP430F6438__) +#include "msp430f6438.h" + +#elif defined (__MSP430F6630__) +#include "msp430f6630.h" + +#elif defined (__MSP430F6631__) +#include "msp430f6631.h" + +#elif defined (__MSP430F6632__) +#include "msp430f6632.h" + +#elif defined (__MSP430F6633__) +#include "msp430f6633.h" + +#elif defined (__MSP430F6634__) +#include "msp430f6634.h" + +#elif defined (__MSP430F6635__) +#include "msp430f6635.h" + +#elif defined (__MSP430F6636__) +#include "msp430f6636.h" + +#elif defined (__MSP430F6637__) +#include "msp430f6637.h" + +#elif defined (__MSP430F6638__) +#include "msp430f6638.h" + +#elif defined (__MSP430F5358__) +#include "msp430f5358.h" + +#elif defined (__MSP430F5359__) +#include "msp430f5359.h" + +#elif defined (__MSP430F5658__) +#include "msp430f5658.h" + +#elif defined (__MSP430F5659__) +#include "msp430f5659.h" + +#elif defined (__MSP430F6458__) +#include "msp430f6458.h" + +#elif defined (__MSP430F6459__) +#include "msp430f6459.h" + +#elif defined (__MSP430F6658__) +#include "msp430f6658.h" + +#elif defined (__MSP430F6659__) +#include "msp430f6659.h" + +#elif defined (__MSP430FG6425__) +#include "msp430fg6425.h" + +#elif defined (__MSP430FG6426__) +#include "msp430fg6426.h" + +#elif defined (__MSP430FG6625__) +#include "msp430fg6625.h" + +#elif defined (__MSP430FG6626__) +#include "msp430fg6626.h" + +#elif defined (__MSP430L092__) +#include "msp430l092.h" + +#elif defined (__MSP430C091__) +#include "msp430c091.h" + +#elif defined (__MSP430C092__) +#include "msp430c092.h" + +#elif defined (__MSP430F5131__) +#include "msp430f5131.h" + +#elif defined (__MSP430F5151__) +#include "msp430f5151.h" + +#elif defined (__MSP430F5171__) +#include "msp430f5171.h" + +#elif defined (__MSP430F5132__) +#include "msp430f5132.h" + +#elif defined (__MSP430F5152__) +#include "msp430f5152.h" + +#elif defined (__MSP430F5172__) +#include "msp430f5172.h" + +#elif defined (__MSP430F6720__) +#include "msp430f6720.h" + +#elif defined (__MSP430F6721__) +#include "msp430f6721.h" + +#elif defined (__MSP430F6723__) +#include "msp430f6723.h" + +#elif defined (__MSP430F6724__) +#include "msp430f6724.h" + +#elif defined (__MSP430F6725__) +#include "msp430f6725.h" + +#elif defined (__MSP430F6726__) +#include "msp430f6726.h" + +#elif defined (__MSP430F6730__) +#include "msp430f6730.h" + +#elif defined (__MSP430F6731__) +#include "msp430f6731.h" + +#elif defined (__MSP430F6733__) +#include "msp430f6733.h" + +#elif defined (__MSP430F6734__) +#include "msp430f6734.h" + +#elif defined (__MSP430F6735__) +#include "msp430f6735.h" + +#elif defined (__MSP430F6736__) +#include "msp430f6736.h" + +#elif defined (__MSP430F67621__) +#include "msp430f67621.h" + +#elif defined (__MSP430F67641__) +#include "msp430f67641.h" + +#elif defined (__MSP430F6720A__) +#include "msp430f6720a.h" + +#elif defined (__MSP430F6721A__) +#include "msp430f6721a.h" + +#elif defined (__MSP430F6723A__) +#include "msp430f6723a.h" + +#elif defined (__MSP430F6724A__) +#include "msp430f6724a.h" + +#elif defined (__MSP430F6725A__) +#include "msp430f6725a.h" + +#elif defined (__MSP430F6726A__) +#include "msp430f6726a.h" + +#elif defined (__MSP430F6730A__) +#include "msp430f6730a.h" + +#elif defined (__MSP430F6731A__) +#include "msp430f6731a.h" + +#elif defined (__MSP430F6733A__) +#include "msp430f6733a.h" + +#elif defined (__MSP430F6734A__) +#include "msp430f6734a.h" + +#elif defined (__MSP430F6735A__) +#include "msp430f6735a.h" + +#elif defined (__MSP430F6736A__) +#include "msp430f6736a.h" + +#elif defined (__MSP430F67621A__) +#include "msp430f67621a.h" + +#elif defined (__MSP430F67641A__) +#include "msp430f67641a.h" + +#elif defined (__MSP430F67451__) +#include "msp430f67451.h" + +#elif defined (__MSP430F67651__) +#include "msp430f67651.h" + +#elif defined (__MSP430F67751__) +#include "msp430f67751.h" + +#elif defined (__MSP430F67461__) +#include "msp430f67461.h" + +#elif defined (__MSP430F67661__) +#include "msp430f67661.h" + +#elif defined (__MSP430F67761__) +#include "msp430f67761.h" + +#elif defined (__MSP430F67471__) +#include "msp430f67471.h" + +#elif defined (__MSP430F67671__) +#include "msp430f67671.h" + +#elif defined (__MSP430F67771__) +#include "msp430f67771.h" + +#elif defined (__MSP430F67481__) +#include "msp430f67481.h" + +#elif defined (__MSP430F67681__) +#include "msp430f67681.h" + +#elif defined (__MSP430F67781__) +#include "msp430f67781.h" + +#elif defined (__MSP430F67491__) +#include "msp430f67491.h" + +#elif defined (__MSP430F67691__) +#include "msp430f67691.h" + +#elif defined (__MSP430F67791__) +#include "msp430f67791.h" + +#elif defined (__MSP430F6745__) +#include "msp430f6745.h" + +#elif defined (__MSP430F6765__) +#include "msp430f6765.h" + +#elif defined (__MSP430F6775__) +#include "msp430f6775.h" + +#elif defined (__MSP430F6746__) +#include "msp430f6746.h" + +#elif defined (__MSP430F6766__) +#include "msp430f6766.h" + +#elif defined (__MSP430F6776__) +#include "msp430f6776.h" + +#elif defined (__MSP430F6747__) +#include "msp430f6747.h" + +#elif defined (__MSP430F6767__) +#include "msp430f6767.h" + +#elif defined (__MSP430F6777__) +#include "msp430f6777.h" + +#elif defined (__MSP430F6748__) +#include "msp430f6748.h" + +#elif defined (__MSP430F6768__) +#include "msp430f6768.h" + +#elif defined (__MSP430F6778__) +#include "msp430f6778.h" + +#elif defined (__MSP430F6749__) +#include "msp430f6749.h" + +#elif defined (__MSP430F6769__) +#include "msp430f6769.h" + +#elif defined (__MSP430F6779__) +#include "msp430f6779.h" + +#elif defined (__MSP430F67451A__) +#include "msp430f67451a.h" + +#elif defined (__MSP430F67651A__) +#include "msp430f67651a.h" + +#elif defined (__MSP430F67751A__) +#include "msp430f67751a.h" + +#elif defined (__MSP430F67461A__) +#include "msp430f67461a.h" + +#elif defined (__MSP430F67661A__) +#include "msp430f67661a.h" + +#elif defined (__MSP430F67761A__) +#include "msp430f67761a.h" + +#elif defined (__MSP430F67471A__) +#include "msp430f67471a.h" + +#elif defined (__MSP430F67671A__) +#include "msp430f67671a.h" + +#elif defined (__MSP430F67771A__) +#include "msp430f67771a.h" + +#elif defined (__MSP430F67481A__) +#include "msp430f67481a.h" + +#elif defined (__MSP430F67681A__) +#include "msp430f67681a.h" + +#elif defined (__MSP430F67781A__) +#include "msp430f67781a.h" + +#elif defined (__MSP430F67491A__) +#include "msp430f67491a.h" + +#elif defined (__MSP430F67691A__) +#include "msp430f67691a.h" + +#elif defined (__MSP430F67791A__) +#include "msp430f67791a.h" + +#elif defined (__MSP430F6745A__) +#include "msp430f6745a.h" + +#elif defined (__MSP430F6765A__) +#include "msp430f6765a.h" + +#elif defined (__MSP430F6775A__) +#include "msp430f6775a.h" + +#elif defined (__MSP430F6746A__) +#include "msp430f6746a.h" + +#elif defined (__MSP430F6766A__) +#include "msp430f6766a.h" + +#elif defined (__MSP430F6776A__) +#include "msp430f6776a.h" + +#elif defined (__MSP430F6747A__) +#include "msp430f6747a.h" + +#elif defined (__MSP430F6767A__) +#include "msp430f6767a.h" + +#elif defined (__MSP430F6777A__) +#include "msp430f6777a.h" + +#elif defined (__MSP430F6748A__) +#include "msp430f6748a.h" + +#elif defined (__MSP430F6768A__) +#include "msp430f6768a.h" + +#elif defined (__MSP430F6778A__) +#include "msp430f6778a.h" + +#elif defined (__MSP430F6749A__) +#include "msp430f6749a.h" + +#elif defined (__MSP430F6769A__) +#include "msp430f6769a.h" + +#elif defined (__MSP430F6779A__) +#include "msp430f6779a.h" + +#elif defined (__MSP430FR5720__) +#include "msp430fr5720.h" + +#elif defined (__MSP430FR5721__) +#include "msp430fr5721.h" + +#elif defined (__MSP430FR5722__) +#include "msp430fr5722.h" + +#elif defined (__MSP430FR5723__) +#include "msp430fr5723.h" + +#elif defined (__MSP430FR5724__) +#include "msp430fr5724.h" + +#elif defined (__MSP430FR5725__) +#include "msp430fr5725.h" + +#elif defined (__MSP430FR5726__) +#include "msp430fr5726.h" + +#elif defined (__MSP430FR5727__) +#include "msp430fr5727.h" + +#elif defined (__MSP430FR5728__) +#include "msp430fr5728.h" + +#elif defined (__MSP430FR5729__) +#include "msp430fr5729.h" + +#elif defined (__MSP430FR5730__) +#include "msp430fr5730.h" + +#elif defined (__MSP430FR5731__) +#include "msp430fr5731.h" + +#elif defined (__MSP430FR5732__) +#include "msp430fr5732.h" + +#elif defined (__MSP430FR5733__) +#include "msp430fr5733.h" + +#elif defined (__MSP430FR5734__) +#include "msp430fr5734.h" + +#elif defined (__MSP430FR5735__) +#include "msp430fr5735.h" + +#elif defined (__MSP430FR5736__) +#include "msp430fr5736.h" + +#elif defined (__MSP430FR5737__) +#include "msp430fr5737.h" + +#elif defined (__MSP430FR5738__) +#include "msp430fr5738.h" + +#elif defined (__MSP430FR5739__) +#include "msp430fr5739.h" + +#elif defined (__MSP430G2211__) +#include "msp430g2211.h" + +#elif defined (__MSP430G2201__) +#include "msp430g2201.h" + +#elif defined (__MSP430G2111__) +#include "msp430g2111.h" + +#elif defined (__MSP430G2101__) +#include "msp430g2101.h" + +#elif defined (__MSP430G2001__) +#include "msp430g2001.h" + +#elif defined (__MSP430G2231__) +#include "msp430g2231.h" + +#elif defined (__MSP430G2221__) +#include "msp430g2221.h" + +#elif defined (__MSP430G2131__) +#include "msp430g2131.h" + +#elif defined (__MSP430G2121__) +#include "msp430g2121.h" + +#elif defined (__MSP430AFE221__) +#include "msp430afe221.h" + +#elif defined (__MSP430AFE231__) +#include "msp430afe231.h" + +#elif defined (__MSP430AFE251__) +#include "msp430afe251.h" + +#elif defined (__MSP430AFE222__) +#include "msp430afe222.h" + +#elif defined (__MSP430AFE232__) +#include "msp430afe232.h" + +#elif defined (__MSP430AFE252__) +#include "msp430afe252.h" + +#elif defined (__MSP430AFE223__) +#include "msp430afe223.h" + +#elif defined (__MSP430AFE233__) +#include "msp430afe233.h" + +#elif defined (__MSP430AFE253__) +#include "msp430afe253.h" + +#elif defined (__MSP430G2102__) +#include "msp430g2102.h" + +#elif defined (__MSP430G2202__) +#include "msp430g2202.h" + +#elif defined (__MSP430G2302__) +#include "msp430g2302.h" + +#elif defined (__MSP430G2402__) +#include "msp430g2402.h" + +#elif defined (__MSP430G2132__) +#include "msp430g2132.h" + +#elif defined (__MSP430G2232__) +#include "msp430g2232.h" + +#elif defined (__MSP430G2332__) +#include "msp430g2332.h" + +#elif defined (__MSP430G2432__) +#include "msp430g2432.h" + +#elif defined (__MSP430G2112__) +#include "msp430g2112.h" + +#elif defined (__MSP430G2212__) +#include "msp430g2212.h" + +#elif defined (__MSP430G2312__) +#include "msp430g2312.h" + +#elif defined (__MSP430G2412__) +#include "msp430g2412.h" + +#elif defined (__MSP430G2152__) +#include "msp430g2152.h" + +#elif defined (__MSP430G2252__) +#include "msp430g2252.h" + +#elif defined (__MSP430G2352__) +#include "msp430g2352.h" + +#elif defined (__MSP430G2452__) +#include "msp430g2452.h" + +#elif defined (__MSP430G2113__) +#include "msp430g2113.h" + +#elif defined (__MSP430G2213__) +#include "msp430g2213.h" + +#elif defined (__MSP430G2313__) +#include "msp430g2313.h" + +#elif defined (__MSP430G2413__) +#include "msp430g2413.h" + +#elif defined (__MSP430G2513__) +#include "msp430g2513.h" + +#elif defined (__MSP430G2153__) +#include "msp430g2153.h" + +#elif defined (__MSP430G2253__) +#include "msp430g2253.h" + +#elif defined (__MSP430G2353__) +#include "msp430g2353.h" + +#elif defined (__MSP430G2453__) +#include "msp430g2453.h" + +#elif defined (__MSP430G2553__) +#include "msp430g2553.h" + +#elif defined (__MSP430G2203__) +#include "msp430g2203.h" + +#elif defined (__MSP430G2303__) +#include "msp430g2303.h" + +#elif defined (__MSP430G2403__) +#include "msp430g2403.h" + +#elif defined (__MSP430G2233__) +#include "msp430g2233.h" + +#elif defined (__MSP430G2333__) +#include "msp430g2333.h" + +#elif defined (__MSP430G2433__) +#include "msp430g2433.h" + +#elif defined (__MSP430G2533__) +#include "msp430g2533.h" + +#elif defined (__MSP430TCH5E__) +#include "msp430tch5e.h" + +#elif defined (__MSP430G2444__) +#include "msp430g2444.h" + +#elif defined (__MSP430G2544__) +#include "msp430g2544.h" + +#elif defined (__MSP430G2744__) +#include "msp430g2744.h" + +#elif defined (__MSP430G2755__) +#include "msp430g2755.h" + +#elif defined (__MSP430G2855__) +#include "msp430g2855.h" + +#elif defined (__MSP430G2955__) +#include "msp430g2955.h" + +#elif defined (__MSP430G2230__) +#include "msp430g2230.h" + +#elif defined (__MSP430G2210__) +#include "msp430g2210.h" + +#elif defined (__MSP430BT5190__) +#include "msp430bt5190.h" + +#elif defined (__MSP430FR5857__) +#include "msp430fr5857.h" + +#elif defined (__MSP430FR5858__) +#include "msp430fr5858.h" + +#elif defined (__MSP430FR5859__) +#include "msp430fr5859.h" + +#elif defined (__MSP430FR5847__) +#include "msp430fr5847.h" + +#elif defined (__MSP430FR58471__) +#include "msp430fr58471.h" + +#elif defined (__MSP430FR5848__) +#include "msp430fr5848.h" + +#elif defined (__MSP430FR5849__) +#include "msp430fr5849.h" + +#elif defined (__MSP430FR5867__) +#include "msp430fr5867.h" + +#elif defined (__MSP430FR58671__) +#include "msp430fr58671.h" + +#elif defined (__MSP430FR5868__) +#include "msp430fr5868.h" + +#elif defined (__MSP430FR5869__) +#include "msp430fr5869.h" + +#elif defined (__MSP430FR5957__) +#include "msp430fr5957.h" + +#elif defined (__MSP430FR5958__) +#include "msp430fr5958.h" + +#elif defined (__MSP430FR5959__) +#include "msp430fr5959.h" + +#elif defined (__MSP430FR5947__) +#include "msp430fr5947.h" + +#elif defined (__MSP430FR59471__) +#include "msp430fr59471.h" + +#elif defined (__MSP430FR5948__) +#include "msp430fr5948.h" + +#elif defined (__MSP430FR5949__) +#include "msp430fr5949.h" + +#elif defined (__MSP430FR5967__) +#include "msp430fr5967.h" + +#elif defined (__MSP430FR5968__) +#include "msp430fr5968.h" + +#elif defined (__MSP430FR5969__) +#include "msp430fr5969.h" + +#elif defined (__MSP430FR59691__) +#include "msp430fr59691.h" + +#elif defined (__MSP430FR5962__) +#include "msp430fr5962.h" + +#elif defined (__MSP430FR5964__) +#include "msp430fr5964.h" + +#elif defined (__MSP430FR5992__) +#include "msp430fr5992.h" + +#elif defined (__MSP430FR5994__) +#include "msp430fr5994.h" + +#elif defined (__MSP430FR59941__) +#include "msp430fr59941.h" + +#elif defined (__MSP430i2020__) +#include "msp430i2020.h" + +#elif defined (__MSP430i2021__) +#include "msp430i2021.h" + +#elif defined (__MSP430i2030__) +#include "msp430i2030.h" + +#elif defined (__MSP430i2031__) +#include "msp430i2031.h" + +#elif defined (__MSP430i2040__) +#include "msp430i2040.h" + +#elif defined (__MSP430i2041__) +#include "msp430i2041.h" + +#elif defined (__RF430FRL152H__) +#include "rf430frl152h.h" + +#elif defined (__RF430FRL153H__) +#include "rf430frl153h.h" + +#elif defined (__RF430FRL154H__) +#include "rf430frl154h.h" + +#elif defined (__RF430FRL152H_ROM__) +#include "rf430frl152h_rom.h" + +#elif defined (__RF430FRL153H_ROM__) +#include "rf430frl153h_rom.h" + +#elif defined (__RF430FRL154H_ROM__) +#include "rf430frl154h_rom.h" + +#elif defined (__RF430F5175__) +#include "rf430f5175.h" + +#elif defined (__RF430F5155__) +#include "rf430f5155.h" + +#elif defined (__RF430F5144__) +#include "rf430f5144.h" + +#elif defined (__MSP430FR69271__) +#include "msp430fr69271.h" + +#elif defined (__MSP430FR68791__) +#include "msp430fr68791.h" + +#elif defined (__MSP430FR69791__) +#include "msp430fr69791.h" + +#elif defined (__MSP430FR6927__) +#include "msp430fr6927.h" + +#elif defined (__MSP430FR6928__) +#include "msp430fr6928.h" + +#elif defined (__MSP430FR6877__) +#include "msp430fr6877.h" + +#elif defined (__MSP430FR6977__) +#include "msp430fr6977.h" + +#elif defined (__MSP430FR6879__) +#include "msp430fr6879.h" + +#elif defined (__MSP430FR6979__) +#include "msp430fr6979.h" + +#elif defined (__MSP430FR58891__) +#include "msp430fr58891.h" + +#elif defined (__MSP430FR68891__) +#include "msp430fr68891.h" + +#elif defined (__MSP430FR59891__) +#include "msp430fr59891.h" + +#elif defined (__MSP430FR69891__) +#include "msp430fr69891.h" + +#elif defined (__MSP430FR5887__) +#include "msp430fr5887.h" + +#elif defined (__MSP430FR5888__) +#include "msp430fr5888.h" + +#elif defined (__MSP430FR5889__) +#include "msp430fr5889.h" + +#elif defined (__MSP430FR6887__) +#include "msp430fr6887.h" + +#elif defined (__MSP430FR6888__) +#include "msp430fr6888.h" + +#elif defined (__MSP430FR6889__) +#include "msp430fr6889.h" + +#elif defined (__MSP430FR5986__) +#include "msp430fr5986.h" + +#elif defined (__MSP430FR5987__) +#include "msp430fr5987.h" + +#elif defined (__MSP430FR5988__) +#include "msp430fr5988.h" + +#elif defined (__MSP430FR5989__) +#include "msp430fr5989.h" + +#elif defined (__MSP430FR6987__) +#include "msp430fr6987.h" + +#elif defined (__MSP430FR6988__) +#include "msp430fr6988.h" + +#elif defined (__MSP430FR6989__) +#include "msp430fr6989.h" + +#elif defined (__MSP430FR5922__) +#include "msp430fr5922.h" + +#elif defined (__MSP430FR5870__) +#include "msp430fr5870.h" + +#elif defined (__MSP430FR5970__) +#include "msp430fr5970.h" + +#elif defined (__MSP430FR5872__) +#include "msp430fr5872.h" + +#elif defined (__MSP430FR5972__) +#include "msp430fr5972.h" + +#elif defined (__MSP430FR6820__) +#include "msp430fr6820.h" + +#elif defined (__MSP430FR6920__) +#include "msp430fr6920.h" + +#elif defined (__MSP430FR6822__) +#include "msp430fr6822.h" + +#elif defined (__MSP430FR6922__) +#include "msp430fr6922.h" + +#elif defined (__MSP430FR6870__) +#include "msp430fr6870.h" + +#elif defined (__MSP430FR6970__) +#include "msp430fr6970.h" + +#elif defined (__MSP430FR6872__) +#include "msp430fr6872.h" + +#elif defined (__MSP430FR6972__) +#include "msp430fr6972.h" + +#elif defined (__MSP430FR59221__) +#include "msp430fr59221.h" + +#elif defined (__MSP430FR58721__) +#include "msp430fr58721.h" + +#elif defined (__MSP430FR59721__) +#include "msp430fr59721.h" + +#elif defined (__MSP430FR68221__) +#include "msp430fr68221.h" + +#elif defined (__MSP430FR69221__) +#include "msp430fr69221.h" + +#elif defined (__MSP430FR68721__) +#include "msp430fr68721.h" + +#elif defined (__MSP430FR69721__) +#include "msp430fr69721.h" + +#elif defined (__MSP430SL5438A__) +#include "msp430sl5438a.h" + +#elif defined (__MSP430FR4131__) +#include "msp430fr4131.h" + +#elif defined (__MSP430FR4132__) +#include "msp430fr4132.h" + +#elif defined (__MSP430FR4133__) +#include "msp430fr4133.h" + +#elif defined (__MSP430FR2032__) +#include "msp430fr2032.h" + +#elif defined (__MSP430FR2033__) +#include "msp430fr2033.h" + +#elif defined (__MSP430FR2110__) +#include "msp430fr2110.h" + +#elif defined (__MSP430FR2111__) +#include "msp430fr2111.h" + +#elif defined (__MSP430FR2310__) +#include "msp430fr2310.h" + +#elif defined (__MSP430FR2311__) +#include "msp430fr2311.h" + +#elif defined (__MSP430FR2433__) +#include "msp430fr2433.h" + +#elif defined (__MSP430FR2532__) +#include "msp430fr2532.h" + +#elif defined (__MSP430FR2533__) +#include "msp430fr2533.h" + +#elif defined (__MSP430FR2632__) +#include "msp430fr2632.h" + +#elif defined (__MSP430FR2633__) +#include "msp430fr2633.h" + +#elif defined (__MSP430F5252__) +#include "msp430f5252.h" + +#elif defined (__MSP430F5253__) +#include "msp430f5253.h" + +#elif defined (__MSP430F5254__) +#include "msp430f5254.h" + +#elif defined (__MSP430F5255__) +#include "msp430f5255.h" + +#elif defined (__MSP430F5256__) +#include "msp430f5256.h" + +#elif defined (__MSP430F5257__) +#include "msp430f5257.h" + +#elif defined (__MSP430F5258__) +#include "msp430f5258.h" + +#elif defined (__MSP430F5259__) +#include "msp430f5259.h" + + +#elif defined (__MSP430XGENERIC__) +#include "msp430xgeneric.h" + +#elif defined (__MSP430F5XX_6XXGENERIC__) +#include "msp430f5xx_6xxgeneric.h" + +#elif defined (__MSP430FR5XX_6XXGENERIC__) +#include "msp430fr5xx_6xxgeneric.h" + +#elif defined (__MSP430FR2XX_4XXGENERIC__) +#include "msp430fr2xx_4xxgeneric.h" + +#elif defined (__MSP430FR57XXGENERIC__) +#include "msp430fr57xxgeneric.h" + +#elif defined (__MSP430I2XXGENERIC__) +#include "msp430i2xxgeneric.h" + +/******************************************************************** + * msp430 generic + ********************************************************************/ +#elif defined (__MSP430GENERIC__) +#error "msp430 generic device does not have a default include file" + +#elif defined (__MSP430XGENERIC__) +#error "msp430X generic device does not have a default include file" + + +/******************************************************************** + * + ********************************************************************/ +#else +#error "Failed to match a default include file" +#endif + +#endif /* #ifndef __msp430 */ + + diff --git a/os/common/ext/MSP430/inc/msp430fr5969.h b/os/common/ext/MSP430/inc/msp430fr5969.h new file mode 100755 index 0000000..54b14f1 --- /dev/null +++ b/os/common/ext/MSP430/inc/msp430fr5969.h @@ -0,0 +1,4509 @@ +/* ============================================================================ */ +/* Copyright (c) 2016, Texas Instruments Incorporated */ +/* All rights reserved. */ +/* */ +/* Redistribution and use in source and binary forms, with or without */ +/* modification, are permitted provided that the following conditions */ +/* are met: */ +/* */ +/* * Redistributions of source code must retain the above copyright */ +/* notice, this list of conditions and the following disclaimer. */ +/* */ +/* * Redistributions in binary form must reproduce the above copyright */ +/* notice, this list of conditions and the following disclaimer in the */ +/* documentation and/or other materials provided with the distribution. */ +/* */ +/* * Neither the name of Texas Instruments Incorporated nor the names of */ +/* its contributors may be used to endorse or promote products derived */ +/* from this software without specific prior written permission. */ +/* */ +/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */ +/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */ +/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */ +/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */ +/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */ +/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */ +/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */ +/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */ +/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */ +/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ +/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +/* ============================================================================ */ + +/******************************************************************** +* +* Standard register and bit definitions for the Texas Instruments +* MSP430 microcontroller. +* +* This file supports assembler and C development for +* MSP430FR5969 devices. +* +* Texas Instruments, Version 1.4 +* +* Rev. 1.0, Setup +* Rev. 1.1 updated PxSELC register address to offset 0x16 (instead of 0x10) +* replaced Comperator B with Comperator E +* Rev. 1.2 fixed typo in SYSRSTIV_MPUSEG defintions +* replaced COMP_B with COMP_E +* Rev. 1.3 removed not available PxDS Register definitions +* Rev. 1.4 replaced NACCESSx with NWAITSx +* +********************************************************************/ + +#ifndef __MSP430FR5969 +#define __MSP430FR5969 + +#define __MSP430_HAS_MSP430XV2_CPU__ /* Definition to show that it has MSP430XV2 CPU */ +#define __MSP430FR5XX_6XX_FAMILY__ + +#define __MSP430_HEADER_VERSION__ 1198 + +#ifdef __cplusplus +extern "C" { +#endif + + +/*----------------------------------------------------------------------------*/ +/* PERIPHERAL FILE MAP */ +/*----------------------------------------------------------------------------*/ + +#define __MSP430_TI_HEADERS__ + +#include <iomacros.h> + + +/************************************************************ +* STANDARD BITS +************************************************************/ + +#define BIT0 (0x0001) +#define BIT1 (0x0002) +#define BIT2 (0x0004) +#define BIT3 (0x0008) +#define BIT4 (0x0010) +#define BIT5 (0x0020) +#define BIT6 (0x0040) +#define BIT7 (0x0080) +#define BIT8 (0x0100) +#define BIT9 (0x0200) +#define BITA (0x0400) +#define BITB (0x0800) +#define BITC (0x1000) +#define BITD (0x2000) +#define BITE (0x4000) +#define BITF (0x8000) + +/************************************************************ +* STATUS REGISTER BITS +************************************************************/ + +#define C (0x0001) +#define Z (0x0002) +#define N (0x0004) +#define V (0x0100) +#define GIE (0x0008) +#define CPUOFF (0x0010) +#define OSCOFF (0x0020) +#define SCG0 (0x0040) +#define SCG1 (0x0080) + +/* Low Power Modes coded with Bits 4-7 in SR */ + +#ifndef __STDC__ /* Begin #defines for assembler */ +#define LPM0 (CPUOFF) +#define LPM1 (SCG0+CPUOFF) +#define LPM2 (SCG1+CPUOFF) +#define LPM3 (SCG1+SCG0+CPUOFF) +#define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF) +/* End #defines for assembler */ + +#else /* Begin #defines for C */ +#define LPM0_bits (CPUOFF) +#define LPM1_bits (SCG0+CPUOFF) +#define LPM2_bits (SCG1+CPUOFF) +#define LPM3_bits (SCG1+SCG0+CPUOFF) +#define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF) + +#include "in430.h" + +#define LPM0 __bis_SR_register(LPM0_bits) /* Enter Low Power Mode 0 */ +#define LPM0_EXIT __bic_SR_register_on_exit(LPM0_bits) /* Exit Low Power Mode 0 */ +#define LPM1 __bis_SR_register(LPM1_bits) /* Enter Low Power Mode 1 */ +#define LPM1_EXIT __bic_SR_register_on_exit(LPM1_bits) /* Exit Low Power Mode 1 */ +#define LPM2 __bis_SR_register(LPM2_bits) /* Enter Low Power Mode 2 */ +#define LPM2_EXIT __bic_SR_register_on_exit(LPM2_bits) /* Exit Low Power Mode 2 */ +#define LPM3 __bis_SR_register(LPM3_bits) /* Enter Low Power Mode 3 */ +#define LPM3_EXIT __bic_SR_register_on_exit(LPM3_bits) /* Exit Low Power Mode 3 */ +#define LPM4 __bis_SR_register(LPM4_bits) /* Enter Low Power Mode 4 */ +#define LPM4_EXIT __bic_SR_register_on_exit(LPM4_bits) /* Exit Low Power Mode 4 */ +#endif /* End #defines for C */ + +/************************************************************ +* PERIPHERAL FILE MAP +************************************************************/ + +/************************************************************ +* ADC12_B +************************************************************/ +#define __MSP430_HAS_ADC12_B__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_ADC12_B__ 0x0800 +#define ADC12_B_BASE __MSP430_BASEADDRESS_ADC12_B__ + +sfr_w(ADC12CTL0); /* ADC12 B Control 0 */ +sfr_b(ADC12CTL0_L); /* ADC12 B Control 0 */ +sfr_b(ADC12CTL0_H); /* ADC12 B Control 0 */ +sfr_w(ADC12CTL1); /* ADC12 B Control 1 */ +sfr_b(ADC12CTL1_L); /* ADC12 B Control 1 */ +sfr_b(ADC12CTL1_H); /* ADC12 B Control 1 */ +sfr_w(ADC12CTL2); /* ADC12 B Control 2 */ +sfr_b(ADC12CTL2_L); /* ADC12 B Control 2 */ +sfr_b(ADC12CTL2_H); /* ADC12 B Control 2 */ +sfr_w(ADC12CTL3); /* ADC12 B Control 3 */ +sfr_b(ADC12CTL3_L); /* ADC12 B Control 3 */ +sfr_b(ADC12CTL3_H); /* ADC12 B Control 3 */ +sfr_w(ADC12LO); /* ADC12 B Window Comparator High Threshold */ +sfr_b(ADC12LO_L); /* ADC12 B Window Comparator High Threshold */ +sfr_b(ADC12LO_H); /* ADC12 B Window Comparator High Threshold */ +sfr_w(ADC12HI); /* ADC12 B Window Comparator High Threshold */ +sfr_b(ADC12HI_L); /* ADC12 B Window Comparator High Threshold */ +sfr_b(ADC12HI_H); /* ADC12 B Window Comparator High Threshold */ +sfr_w(ADC12IFGR0); /* ADC12 B Interrupt Flag 0 */ +sfr_b(ADC12IFGR0_L); /* ADC12 B Interrupt Flag 0 */ +sfr_b(ADC12IFGR0_H); /* ADC12 B Interrupt Flag 0 */ +sfr_w(ADC12IFGR1); /* ADC12 B Interrupt Flag 1 */ +sfr_b(ADC12IFGR1_L); /* ADC12 B Interrupt Flag 1 */ +sfr_b(ADC12IFGR1_H); /* ADC12 B Interrupt Flag 1 */ +sfr_w(ADC12IFGR2); /* ADC12 B Interrupt Flag 2 */ +sfr_b(ADC12IFGR2_L); /* ADC12 B Interrupt Flag 2 */ +sfr_b(ADC12IFGR2_H); /* ADC12 B Interrupt Flag 2 */ +sfr_w(ADC12IER0); /* ADC12 B Interrupt Enable 0 */ +sfr_b(ADC12IER0_L); /* ADC12 B Interrupt Enable 0 */ +sfr_b(ADC12IER0_H); /* ADC12 B Interrupt Enable 0 */ +sfr_w(ADC12IER1); /* ADC12 B Interrupt Enable 1 */ +sfr_b(ADC12IER1_L); /* ADC12 B Interrupt Enable 1 */ +sfr_b(ADC12IER1_H); /* ADC12 B Interrupt Enable 1 */ +sfr_w(ADC12IER2); /* ADC12 B Interrupt Enable 2 */ +sfr_b(ADC12IER2_L); /* ADC12 B Interrupt Enable 2 */ +sfr_b(ADC12IER2_H); /* ADC12 B Interrupt Enable 2 */ +sfr_w(ADC12IV); /* ADC12 B Interrupt Vector Word */ +sfr_b(ADC12IV_L); /* ADC12 B Interrupt Vector Word */ +sfr_b(ADC12IV_H); /* ADC12 B Interrupt Vector Word */ + +sfr_w(ADC12MCTL0); /* ADC12 Memory Control 0 */ +sfr_b(ADC12MCTL0_L); /* ADC12 Memory Control 0 */ +sfr_b(ADC12MCTL0_H); /* ADC12 Memory Control 0 */ +sfr_w(ADC12MCTL1); /* ADC12 Memory Control 1 */ +sfr_b(ADC12MCTL1_L); /* ADC12 Memory Control 1 */ +sfr_b(ADC12MCTL1_H); /* ADC12 Memory Control 1 */ +sfr_w(ADC12MCTL2); /* ADC12 Memory Control 2 */ +sfr_b(ADC12MCTL2_L); /* ADC12 Memory Control 2 */ +sfr_b(ADC12MCTL2_H); /* ADC12 Memory Control 2 */ +sfr_w(ADC12MCTL3); /* ADC12 Memory Control 3 */ +sfr_b(ADC12MCTL3_L); /* ADC12 Memory Control 3 */ +sfr_b(ADC12MCTL3_H); /* ADC12 Memory Control 3 */ +sfr_w(ADC12MCTL4); /* ADC12 Memory Control 4 */ +sfr_b(ADC12MCTL4_L); /* ADC12 Memory Control 4 */ +sfr_b(ADC12MCTL4_H); /* ADC12 Memory Control 4 */ +sfr_w(ADC12MCTL5); /* ADC12 Memory Control 5 */ +sfr_b(ADC12MCTL5_L); /* ADC12 Memory Control 5 */ +sfr_b(ADC12MCTL5_H); /* ADC12 Memory Control 5 */ +sfr_w(ADC12MCTL6); /* ADC12 Memory Control 6 */ +sfr_b(ADC12MCTL6_L); /* ADC12 Memory Control 6 */ +sfr_b(ADC12MCTL6_H); /* ADC12 Memory Control 6 */ +sfr_w(ADC12MCTL7); /* ADC12 Memory Control 7 */ +sfr_b(ADC12MCTL7_L); /* ADC12 Memory Control 7 */ +sfr_b(ADC12MCTL7_H); /* ADC12 Memory Control 7 */ +sfr_w(ADC12MCTL8); /* ADC12 Memory Control 8 */ +sfr_b(ADC12MCTL8_L); /* ADC12 Memory Control 8 */ +sfr_b(ADC12MCTL8_H); /* ADC12 Memory Control 8 */ +sfr_w(ADC12MCTL9); /* ADC12 Memory Control 9 */ +sfr_b(ADC12MCTL9_L); /* ADC12 Memory Control 9 */ +sfr_b(ADC12MCTL9_H); /* ADC12 Memory Control 9 */ +sfr_w(ADC12MCTL10); /* ADC12 Memory Control 10 */ +sfr_b(ADC12MCTL10_L); /* ADC12 Memory Control 10 */ +sfr_b(ADC12MCTL10_H); /* ADC12 Memory Control 10 */ +sfr_w(ADC12MCTL11); /* ADC12 Memory Control 11 */ +sfr_b(ADC12MCTL11_L); /* ADC12 Memory Control 11 */ +sfr_b(ADC12MCTL11_H); /* ADC12 Memory Control 11 */ +sfr_w(ADC12MCTL12); /* ADC12 Memory Control 12 */ +sfr_b(ADC12MCTL12_L); /* ADC12 Memory Control 12 */ +sfr_b(ADC12MCTL12_H); /* ADC12 Memory Control 12 */ +sfr_w(ADC12MCTL13); /* ADC12 Memory Control 13 */ +sfr_b(ADC12MCTL13_L); /* ADC12 Memory Control 13 */ +sfr_b(ADC12MCTL13_H); /* ADC12 Memory Control 13 */ +sfr_w(ADC12MCTL14); /* ADC12 Memory Control 14 */ +sfr_b(ADC12MCTL14_L); /* ADC12 Memory Control 14 */ +sfr_b(ADC12MCTL14_H); /* ADC12 Memory Control 14 */ +sfr_w(ADC12MCTL15); /* ADC12 Memory Control 15 */ +sfr_b(ADC12MCTL15_L); /* ADC12 Memory Control 15 */ +sfr_b(ADC12MCTL15_H); /* ADC12 Memory Control 15 */ +sfr_w(ADC12MCTL16); /* ADC12 Memory Control 16 */ +sfr_b(ADC12MCTL16_L); /* ADC12 Memory Control 16 */ +sfr_b(ADC12MCTL16_H); /* ADC12 Memory Control 16 */ +sfr_w(ADC12MCTL17); /* ADC12 Memory Control 17 */ +sfr_b(ADC12MCTL17_L); /* ADC12 Memory Control 17 */ +sfr_b(ADC12MCTL17_H); /* ADC12 Memory Control 17 */ +sfr_w(ADC12MCTL18); /* ADC12 Memory Control 18 */ +sfr_b(ADC12MCTL18_L); /* ADC12 Memory Control 18 */ +sfr_b(ADC12MCTL18_H); /* ADC12 Memory Control 18 */ +sfr_w(ADC12MCTL19); /* ADC12 Memory Control 19 */ +sfr_b(ADC12MCTL19_L); /* ADC12 Memory Control 19 */ +sfr_b(ADC12MCTL19_H); /* ADC12 Memory Control 19 */ +sfr_w(ADC12MCTL20); /* ADC12 Memory Control 20 */ +sfr_b(ADC12MCTL20_L); /* ADC12 Memory Control 20 */ +sfr_b(ADC12MCTL20_H); /* ADC12 Memory Control 20 */ +sfr_w(ADC12MCTL21); /* ADC12 Memory Control 21 */ +sfr_b(ADC12MCTL21_L); /* ADC12 Memory Control 21 */ +sfr_b(ADC12MCTL21_H); /* ADC12 Memory Control 21 */ +sfr_w(ADC12MCTL22); /* ADC12 Memory Control 22 */ +sfr_b(ADC12MCTL22_L); /* ADC12 Memory Control 22 */ +sfr_b(ADC12MCTL22_H); /* ADC12 Memory Control 22 */ +sfr_w(ADC12MCTL23); /* ADC12 Memory Control 23 */ +sfr_b(ADC12MCTL23_L); /* ADC12 Memory Control 23 */ +sfr_b(ADC12MCTL23_H); /* ADC12 Memory Control 23 */ +sfr_w(ADC12MCTL24); /* ADC12 Memory Control 24 */ +sfr_b(ADC12MCTL24_L); /* ADC12 Memory Control 24 */ +sfr_b(ADC12MCTL24_H); /* ADC12 Memory Control 24 */ +sfr_w(ADC12MCTL25); /* ADC12 Memory Control 25 */ +sfr_b(ADC12MCTL25_L); /* ADC12 Memory Control 25 */ +sfr_b(ADC12MCTL25_H); /* ADC12 Memory Control 25 */ +sfr_w(ADC12MCTL26); /* ADC12 Memory Control 26 */ +sfr_b(ADC12MCTL26_L); /* ADC12 Memory Control 26 */ +sfr_b(ADC12MCTL26_H); /* ADC12 Memory Control 26 */ +sfr_w(ADC12MCTL27); /* ADC12 Memory Control 27 */ +sfr_b(ADC12MCTL27_L); /* ADC12 Memory Control 27 */ +sfr_b(ADC12MCTL27_H); /* ADC12 Memory Control 27 */ +sfr_w(ADC12MCTL28); /* ADC12 Memory Control 28 */ +sfr_b(ADC12MCTL28_L); /* ADC12 Memory Control 28 */ +sfr_b(ADC12MCTL28_H); /* ADC12 Memory Control 28 */ +sfr_w(ADC12MCTL29); /* ADC12 Memory Control 29 */ +sfr_b(ADC12MCTL29_L); /* ADC12 Memory Control 29 */ +sfr_b(ADC12MCTL29_H); /* ADC12 Memory Control 29 */ +sfr_w(ADC12MCTL30); /* ADC12 Memory Control 30 */ +sfr_b(ADC12MCTL30_L); /* ADC12 Memory Control 30 */ +sfr_b(ADC12MCTL30_H); /* ADC12 Memory Control 30 */ +sfr_w(ADC12MCTL31); /* ADC12 Memory Control 31 */ +sfr_b(ADC12MCTL31_L); /* ADC12 Memory Control 31 */ +sfr_b(ADC12MCTL31_H); /* ADC12 Memory Control 31 */ +#define ADC12MCTL_ ADC12MCTL /* ADC12 Memory Control */ +#ifndef __STDC__ +#define ADC12MCTL ADC12MCTL0 /* ADC12 Memory Control (for assembler) */ +#else +#define ADC12MCTL ((volatile char*) &ADC12MCTL0) /* ADC12 Memory Control (for C) */ +#endif + +sfr_w(ADC12MEM0); /* ADC12 Conversion Memory 0 */ +sfr_b(ADC12MEM0_L); /* ADC12 Conversion Memory 0 */ +sfr_b(ADC12MEM0_H); /* ADC12 Conversion Memory 0 */ +sfr_w(ADC12MEM1); /* ADC12 Conversion Memory 1 */ +sfr_b(ADC12MEM1_L); /* ADC12 Conversion Memory 1 */ +sfr_b(ADC12MEM1_H); /* ADC12 Conversion Memory 1 */ +sfr_w(ADC12MEM2); /* ADC12 Conversion Memory 2 */ +sfr_b(ADC12MEM2_L); /* ADC12 Conversion Memory 2 */ +sfr_b(ADC12MEM2_H); /* ADC12 Conversion Memory 2 */ +sfr_w(ADC12MEM3); /* ADC12 Conversion Memory 3 */ +sfr_b(ADC12MEM3_L); /* ADC12 Conversion Memory 3 */ +sfr_b(ADC12MEM3_H); /* ADC12 Conversion Memory 3 */ +sfr_w(ADC12MEM4); /* ADC12 Conversion Memory 4 */ +sfr_b(ADC12MEM4_L); /* ADC12 Conversion Memory 4 */ +sfr_b(ADC12MEM4_H); /* ADC12 Conversion Memory 4 */ +sfr_w(ADC12MEM5); /* ADC12 Conversion Memory 5 */ +sfr_b(ADC12MEM5_L); /* ADC12 Conversion Memory 5 */ +sfr_b(ADC12MEM5_H); /* ADC12 Conversion Memory 5 */ +sfr_w(ADC12MEM6); /* ADC12 Conversion Memory 6 */ +sfr_b(ADC12MEM6_L); /* ADC12 Conversion Memory 6 */ +sfr_b(ADC12MEM6_H); /* ADC12 Conversion Memory 6 */ +sfr_w(ADC12MEM7); /* ADC12 Conversion Memory 7 */ +sfr_b(ADC12MEM7_L); /* ADC12 Conversion Memory 7 */ +sfr_b(ADC12MEM7_H); /* ADC12 Conversion Memory 7 */ +sfr_w(ADC12MEM8); /* ADC12 Conversion Memory 8 */ +sfr_b(ADC12MEM8_L); /* ADC12 Conversion Memory 8 */ +sfr_b(ADC12MEM8_H); /* ADC12 Conversion Memory 8 */ +sfr_w(ADC12MEM9); /* ADC12 Conversion Memory 9 */ +sfr_b(ADC12MEM9_L); /* ADC12 Conversion Memory 9 */ +sfr_b(ADC12MEM9_H); /* ADC12 Conversion Memory 9 */ +sfr_w(ADC12MEM10); /* ADC12 Conversion Memory 10 */ +sfr_b(ADC12MEM10_L); /* ADC12 Conversion Memory 10 */ +sfr_b(ADC12MEM10_H); /* ADC12 Conversion Memory 10 */ +sfr_w(ADC12MEM11); /* ADC12 Conversion Memory 11 */ +sfr_b(ADC12MEM11_L); /* ADC12 Conversion Memory 11 */ +sfr_b(ADC12MEM11_H); /* ADC12 Conversion Memory 11 */ +sfr_w(ADC12MEM12); /* ADC12 Conversion Memory 12 */ +sfr_b(ADC12MEM12_L); /* ADC12 Conversion Memory 12 */ +sfr_b(ADC12MEM12_H); /* ADC12 Conversion Memory 12 */ +sfr_w(ADC12MEM13); /* ADC12 Conversion Memory 13 */ +sfr_b(ADC12MEM13_L); /* ADC12 Conversion Memory 13 */ +sfr_b(ADC12MEM13_H); /* ADC12 Conversion Memory 13 */ +sfr_w(ADC12MEM14); /* ADC12 Conversion Memory 14 */ +sfr_b(ADC12MEM14_L); /* ADC12 Conversion Memory 14 */ +sfr_b(ADC12MEM14_H); /* ADC12 Conversion Memory 14 */ +sfr_w(ADC12MEM15); /* ADC12 Conversion Memory 15 */ +sfr_b(ADC12MEM15_L); /* ADC12 Conversion Memory 15 */ +sfr_b(ADC12MEM15_H); /* ADC12 Conversion Memory 15 */ +sfr_w(ADC12MEM16); /* ADC12 Conversion Memory 16 */ +sfr_b(ADC12MEM16_L); /* ADC12 Conversion Memory 16 */ +sfr_b(ADC12MEM16_H); /* ADC12 Conversion Memory 16 */ +sfr_w(ADC12MEM17); /* ADC12 Conversion Memory 17 */ +sfr_b(ADC12MEM17_L); /* ADC12 Conversion Memory 17 */ +sfr_b(ADC12MEM17_H); /* ADC12 Conversion Memory 17 */ +sfr_w(ADC12MEM18); /* ADC12 Conversion Memory 18 */ +sfr_b(ADC12MEM18_L); /* ADC12 Conversion Memory 18 */ +sfr_b(ADC12MEM18_H); /* ADC12 Conversion Memory 18 */ +sfr_w(ADC12MEM19); /* ADC12 Conversion Memory 19 */ +sfr_b(ADC12MEM19_L); /* ADC12 Conversion Memory 19 */ +sfr_b(ADC12MEM19_H); /* ADC12 Conversion Memory 19 */ +sfr_w(ADC12MEM20); /* ADC12 Conversion Memory 20 */ +sfr_b(ADC12MEM20_L); /* ADC12 Conversion Memory 20 */ +sfr_b(ADC12MEM20_H); /* ADC12 Conversion Memory 20 */ +sfr_w(ADC12MEM21); /* ADC12 Conversion Memory 21 */ +sfr_b(ADC12MEM21_L); /* ADC12 Conversion Memory 21 */ +sfr_b(ADC12MEM21_H); /* ADC12 Conversion Memory 21 */ +sfr_w(ADC12MEM22); /* ADC12 Conversion Memory 22 */ +sfr_b(ADC12MEM22_L); /* ADC12 Conversion Memory 22 */ +sfr_b(ADC12MEM22_H); /* ADC12 Conversion Memory 22 */ +sfr_w(ADC12MEM23); /* ADC12 Conversion Memory 23 */ +sfr_b(ADC12MEM23_L); /* ADC12 Conversion Memory 23 */ +sfr_b(ADC12MEM23_H); /* ADC12 Conversion Memory 23 */ +sfr_w(ADC12MEM24); /* ADC12 Conversion Memory 24 */ +sfr_b(ADC12MEM24_L); /* ADC12 Conversion Memory 24 */ +sfr_b(ADC12MEM24_H); /* ADC12 Conversion Memory 24 */ +sfr_w(ADC12MEM25); /* ADC12 Conversion Memory 25 */ +sfr_b(ADC12MEM25_L); /* ADC12 Conversion Memory 25 */ +sfr_b(ADC12MEM25_H); /* ADC12 Conversion Memory 25 */ +sfr_w(ADC12MEM26); /* ADC12 Conversion Memory 26 */ +sfr_b(ADC12MEM26_L); /* ADC12 Conversion Memory 26 */ +sfr_b(ADC12MEM26_H); /* ADC12 Conversion Memory 26 */ +sfr_w(ADC12MEM27); /* ADC12 Conversion Memory 27 */ +sfr_b(ADC12MEM27_L); /* ADC12 Conversion Memory 27 */ +sfr_b(ADC12MEM27_H); /* ADC12 Conversion Memory 27 */ +sfr_w(ADC12MEM28); /* ADC12 Conversion Memory 28 */ +sfr_b(ADC12MEM28_L); /* ADC12 Conversion Memory 28 */ +sfr_b(ADC12MEM28_H); /* ADC12 Conversion Memory 28 */ +sfr_w(ADC12MEM29); /* ADC12 Conversion Memory 29 */ +sfr_b(ADC12MEM29_L); /* ADC12 Conversion Memory 29 */ +sfr_b(ADC12MEM29_H); /* ADC12 Conversion Memory 29 */ +sfr_w(ADC12MEM30); /* ADC12 Conversion Memory 30 */ +sfr_b(ADC12MEM30_L); /* ADC12 Conversion Memory 30 */ +sfr_b(ADC12MEM30_H); /* ADC12 Conversion Memory 30 */ +sfr_w(ADC12MEM31); /* ADC12 Conversion Memory 31 */ +sfr_b(ADC12MEM31_L); /* ADC12 Conversion Memory 31 */ +sfr_b(ADC12MEM31_H); /* ADC12 Conversion Memory 31 */ +#define ADC12MEM_ ADC12MEM /* ADC12 Conversion Memory */ +#ifndef __STDC__ +#define ADC12MEM ADC12MEM0 /* ADC12 Conversion Memory (for assembler) */ +#else +#define ADC12MEM ((volatile int*) &ADC12MEM0) /* ADC12 Conversion Memory (for C) */ +#endif + +/* ADC12CTL0 Control Bits */ +#define ADC12SC (0x0001) /* ADC12 Start Conversion */ +#define ADC12ENC (0x0002) /* ADC12 Enable Conversion */ +#define ADC12ON (0x0010) /* ADC12 On/enable */ +#define ADC12MSC (0x0080) /* ADC12 Multiple SampleConversion */ +#define ADC12SHT00 (0x0100) /* ADC12 Sample Hold 0 Select Bit: 0 */ +#define ADC12SHT01 (0x0200) /* ADC12 Sample Hold 0 Select Bit: 1 */ +#define ADC12SHT02 (0x0400) /* ADC12 Sample Hold 0 Select Bit: 2 */ +#define ADC12SHT03 (0x0800) /* ADC12 Sample Hold 0 Select Bit: 3 */ +#define ADC12SHT10 (0x1000) /* ADC12 Sample Hold 1 Select Bit: 0 */ +#define ADC12SHT11 (0x2000) /* ADC12 Sample Hold 1 Select Bit: 1 */ +#define ADC12SHT12 (0x4000) /* ADC12 Sample Hold 1 Select Bit: 2 */ +#define ADC12SHT13 (0x8000) /* ADC12 Sample Hold 1 Select Bit: 3 */ + +/* ADC12CTL0 Control Bits */ +#define ADC12SC_L (0x0001) /* ADC12 Start Conversion */ +#define ADC12ENC_L (0x0002) /* ADC12 Enable Conversion */ +#define ADC12ON_L (0x0010) /* ADC12 On/enable */ +#define ADC12MSC_L (0x0080) /* ADC12 Multiple SampleConversion */ + +/* ADC12CTL0 Control Bits */ +#define ADC12SHT00_H (0x0001) /* ADC12 Sample Hold 0 Select Bit: 0 */ +#define ADC12SHT01_H (0x0002) /* ADC12 Sample Hold 0 Select Bit: 1 */ +#define ADC12SHT02_H (0x0004) /* ADC12 Sample Hold 0 Select Bit: 2 */ +#define ADC12SHT03_H (0x0008) /* ADC12 Sample Hold 0 Select Bit: 3 */ +#define ADC12SHT10_H (0x0010) /* ADC12 Sample Hold 1 Select Bit: 0 */ +#define ADC12SHT11_H (0x0020) /* ADC12 Sample Hold 1 Select Bit: 1 */ +#define ADC12SHT12_H (0x0040) /* ADC12 Sample Hold 1 Select Bit: 2 */ +#define ADC12SHT13_H (0x0080) /* ADC12 Sample Hold 1 Select Bit: 3 */ + +#define ADC12SHT0_0 (0x0000) /* ADC12 Sample Hold 0 Select Bit: 0 */ +#define ADC12SHT0_1 (0x0100) /* ADC12 Sample Hold 0 Select Bit: 1 */ +#define ADC12SHT0_2 (0x0200) /* ADC12 Sample Hold 0 Select Bit: 2 */ +#define ADC12SHT0_3 (0x0300) /* ADC12 Sample Hold 0 Select Bit: 3 */ +#define ADC12SHT0_4 (0x0400) /* ADC12 Sample Hold 0 Select Bit: 4 */ +#define ADC12SHT0_5 (0x0500) /* ADC12 Sample Hold 0 Select Bit: 5 */ +#define ADC12SHT0_6 (0x0600) /* ADC12 Sample Hold 0 Select Bit: 6 */ +#define ADC12SHT0_7 (0x0700) /* ADC12 Sample Hold 0 Select Bit: 7 */ +#define ADC12SHT0_8 (0x0800) /* ADC12 Sample Hold 0 Select Bit: 8 */ +#define ADC12SHT0_9 (0x0900) /* ADC12 Sample Hold 0 Select Bit: 9 */ +#define ADC12SHT0_10 (0x0A00) /* ADC12 Sample Hold 0 Select Bit: 10 */ +#define ADC12SHT0_11 (0x0B00) /* ADC12 Sample Hold 0 Select Bit: 11 */ +#define ADC12SHT0_12 (0x0C00) /* ADC12 Sample Hold 0 Select Bit: 12 */ +#define ADC12SHT0_13 (0x0D00) /* ADC12 Sample Hold 0 Select Bit: 13 */ +#define ADC12SHT0_14 (0x0E00) /* ADC12 Sample Hold 0 Select Bit: 14 */ +#define ADC12SHT0_15 (0x0F00) /* ADC12 Sample Hold 0 Select Bit: 15 */ + +#define ADC12SHT1_0 (0x0000) /* ADC12 Sample Hold 1 Select Bit: 0 */ +#define ADC12SHT1_1 (0x1000) /* ADC12 Sample Hold 1 Select Bit: 1 */ +#define ADC12SHT1_2 (0x2000) /* ADC12 Sample Hold 1 Select Bit: 2 */ +#define ADC12SHT1_3 (0x3000) /* ADC12 Sample Hold 1 Select Bit: 3 */ +#define ADC12SHT1_4 (0x4000) /* ADC12 Sample Hold 1 Select Bit: 4 */ +#define ADC12SHT1_5 (0x5000) /* ADC12 Sample Hold 1 Select Bit: 5 */ +#define ADC12SHT1_6 (0x6000) /* ADC12 Sample Hold 1 Select Bit: 6 */ +#define ADC12SHT1_7 (0x7000) /* ADC12 Sample Hold 1 Select Bit: 7 */ +#define ADC12SHT1_8 (0x8000) /* ADC12 Sample Hold 1 Select Bit: 8 */ +#define ADC12SHT1_9 (0x9000) /* ADC12 Sample Hold 1 Select Bit: 9 */ +#define ADC12SHT1_10 (0xA000) /* ADC12 Sample Hold 1 Select Bit: 10 */ +#define ADC12SHT1_11 (0xB000) /* ADC12 Sample Hold 1 Select Bit: 11 */ +#define ADC12SHT1_12 (0xC000) /* ADC12 Sample Hold 1 Select Bit: 12 */ +#define ADC12SHT1_13 (0xD000) /* ADC12 Sample Hold 1 Select Bit: 13 */ +#define ADC12SHT1_14 (0xE000) /* ADC12 Sample Hold 1 Select Bit: 14 */ +#define ADC12SHT1_15 (0xF000) /* ADC12 Sample Hold 1 Select Bit: 15 */ + +/* ADC12CTL1 Control Bits */ +#define ADC12BUSY (0x0001) /* ADC12 Busy */ +#define ADC12CONSEQ0 (0x0002) /* ADC12 Conversion Sequence Select Bit: 0 */ +#define ADC12CONSEQ1 (0x0004) /* ADC12 Conversion Sequence Select Bit: 1 */ +#define ADC12SSEL0 (0x0008) /* ADC12 Clock Source Select Bit: 0 */ +#define ADC12SSEL1 (0x0010) /* ADC12 Clock Source Select Bit: 1 */ +#define ADC12DIV0 (0x0020) /* ADC12 Clock Divider Select Bit: 0 */ +#define ADC12DIV1 (0x0040) /* ADC12 Clock Divider Select Bit: 1 */ +#define ADC12DIV2 (0x0080) /* ADC12 Clock Divider Select Bit: 2 */ +#define ADC12ISSH (0x0100) /* ADC12 Invert Sample Hold Signal */ +#define ADC12SHP (0x0200) /* ADC12 Sample/Hold Pulse Mode */ +#define ADC12SHS0 (0x0400) /* ADC12 Sample/Hold Source Bit: 0 */ +#define ADC12SHS1 (0x0800) /* ADC12 Sample/Hold Source Bit: 1 */ +#define ADC12SHS2 (0x1000) /* ADC12 Sample/Hold Source Bit: 2 */ +#define ADC12PDIV0 (0x2000) /* ADC12 Predivider Bit: 0 */ +#define ADC12PDIV1 (0x4000) /* ADC12 Predivider Bit: 1 */ + +/* ADC12CTL1 Control Bits */ +#define ADC12BUSY_L (0x0001) /* ADC12 Busy */ +#define ADC12CONSEQ0_L (0x0002) /* ADC12 Conversion Sequence Select Bit: 0 */ +#define ADC12CONSEQ1_L (0x0004) /* ADC12 Conversion Sequence Select Bit: 1 */ +#define ADC12SSEL0_L (0x0008) /* ADC12 Clock Source Select Bit: 0 */ +#define ADC12SSEL1_L (0x0010) /* ADC12 Clock Source Select Bit: 1 */ +#define ADC12DIV0_L (0x0020) /* ADC12 Clock Divider Select Bit: 0 */ +#define ADC12DIV1_L (0x0040) /* ADC12 Clock Divider Select Bit: 1 */ +#define ADC12DIV2_L (0x0080) /* ADC12 Clock Divider Select Bit: 2 */ + +/* ADC12CTL1 Control Bits */ +#define ADC12ISSH_H (0x0001) /* ADC12 Invert Sample Hold Signal */ +#define ADC12SHP_H (0x0002) /* ADC12 Sample/Hold Pulse Mode */ +#define ADC12SHS0_H (0x0004) /* ADC12 Sample/Hold Source Bit: 0 */ +#define ADC12SHS1_H (0x0008) /* ADC12 Sample/Hold Source Bit: 1 */ +#define ADC12SHS2_H (0x0010) /* ADC12 Sample/Hold Source Bit: 2 */ +#define ADC12PDIV0_H (0x0020) /* ADC12 Predivider Bit: 0 */ +#define ADC12PDIV1_H (0x0040) /* ADC12 Predivider Bit: 1 */ + +#define ADC12CONSEQ_0 (0x0000) /* ADC12 Conversion Sequence Select: 0 */ +#define ADC12CONSEQ_1 (0x0002) /* ADC12 Conversion Sequence Select: 1 */ +#define ADC12CONSEQ_2 (0x0004) /* ADC12 Conversion Sequence Select: 2 */ +#define ADC12CONSEQ_3 (0x0006) /* ADC12 Conversion Sequence Select: 3 */ + +#define ADC12SSEL_0 (0x0000) /* ADC12 Clock Source Select: 0 */ +#define ADC12SSEL_1 (0x0008) /* ADC12 Clock Source Select: 1 */ +#define ADC12SSEL_2 (0x0010) /* ADC12 Clock Source Select: 2 */ +#define ADC12SSEL_3 (0x0018) /* ADC12 Clock Source Select: 3 */ + +#define ADC12DIV_0 (0x0000) /* ADC12 Clock Divider Select: 0 */ +#define ADC12DIV_1 (0x0020) /* ADC12 Clock Divider Select: 1 */ +#define ADC12DIV_2 (0x0040) /* ADC12 Clock Divider Select: 2 */ +#define ADC12DIV_3 (0x0060) /* ADC12 Clock Divider Select: 3 */ +#define ADC12DIV_4 (0x0080) /* ADC12 Clock Divider Select: 4 */ +#define ADC12DIV_5 (0x00A0) /* ADC12 Clock Divider Select: 5 */ +#define ADC12DIV_6 (0x00C0) /* ADC12 Clock Divider Select: 6 */ +#define ADC12DIV_7 (0x00E0) /* ADC12 Clock Divider Select: 7 */ + +#define ADC12SHS_0 (0x0000) /* ADC12 Sample/Hold Source: 0 */ +#define ADC12SHS_1 (0x0400) /* ADC12 Sample/Hold Source: 1 */ +#define ADC12SHS_2 (0x0800) /* ADC12 Sample/Hold Source: 2 */ +#define ADC12SHS_3 (0x0C00) /* ADC12 Sample/Hold Source: 3 */ +#define ADC12SHS_4 (0x1000) /* ADC12 Sample/Hold Source: 4 */ +#define ADC12SHS_5 (0x1400) /* ADC12 Sample/Hold Source: 5 */ +#define ADC12SHS_6 (0x1800) /* ADC12 Sample/Hold Source: 6 */ +#define ADC12SHS_7 (0x1C00) /* ADC12 Sample/Hold Source: 7 */ + +#define ADC12PDIV_0 (0x0000) /* ADC12 Clock predivider Select 0 */ +#define ADC12PDIV_1 (0x2000) /* ADC12 Clock predivider Select 1 */ +#define ADC12PDIV_2 (0x4000) /* ADC12 Clock predivider Select 2 */ +#define ADC12PDIV_3 (0x6000) /* ADC12 Clock predivider Select 3 */ +#define ADC12PDIV__1 (0x0000) /* ADC12 Clock predivider Select: /1 */ +#define ADC12PDIV__4 (0x2000) /* ADC12 Clock predivider Select: /4 */ +#define ADC12PDIV__32 (0x4000) /* ADC12 Clock predivider Select: /32 */ +#define ADC12PDIV__64 (0x6000) /* ADC12 Clock predivider Select: /64 */ + +/* ADC12CTL2 Control Bits */ +#define ADC12PWRMD (0x0001) /* ADC12 Power Mode */ +#define ADC12DF (0x0008) /* ADC12 Data Format */ +#define ADC12RES0 (0x0010) /* ADC12 Resolution Bit: 0 */ +#define ADC12RES1 (0x0020) /* ADC12 Resolution Bit: 1 */ + +/* ADC12CTL2 Control Bits */ +#define ADC12PWRMD_L (0x0001) /* ADC12 Power Mode */ +#define ADC12DF_L (0x0008) /* ADC12 Data Format */ +#define ADC12RES0_L (0x0010) /* ADC12 Resolution Bit: 0 */ +#define ADC12RES1_L (0x0020) /* ADC12 Resolution Bit: 1 */ + +#define ADC12RES_0 (0x0000) /* ADC12+ Resolution : 8 Bit */ +#define ADC12RES_1 (0x0010) /* ADC12+ Resolution : 10 Bit */ +#define ADC12RES_2 (0x0020) /* ADC12+ Resolution : 12 Bit */ +#define ADC12RES_3 (0x0030) /* ADC12+ Resolution : reserved */ + +#define ADC12RES__8BIT (0x0000) /* ADC12+ Resolution : 8 Bit */ +#define ADC12RES__10BIT (0x0010) /* ADC12+ Resolution : 10 Bit */ +#define ADC12RES__12BIT (0x0020) /* ADC12+ Resolution : 12 Bit */ + +/* ADC12CTL3 Control Bits */ +#define ADC12CSTARTADD0 (0x0001) /* ADC12 Conversion Start Address Bit: 0 */ +#define ADC12CSTARTADD1 (0x0002) /* ADC12 Conversion Start Address Bit: 1 */ +#define ADC12CSTARTADD2 (0x0004) /* ADC12 Conversion Start Address Bit: 2 */ +#define ADC12CSTARTADD3 (0x0008) /* ADC12 Conversion Start Address Bit: 3 */ +#define ADC12CSTARTADD4 (0x0010) /* ADC12 Conversion Start Address Bit: 4 */ +#define ADC12BATMAP (0x0040) /* ADC12 Internal AVCC/2 select */ +#define ADC12TCMAP (0x0080) /* ADC12 Internal TempSensor select */ +#define ADC12ICH0MAP (0x0100) /* ADC12 Internal Channel 0 select */ +#define ADC12ICH1MAP (0x0200) /* ADC12 Internal Channel 1 select */ +#define ADC12ICH2MAP (0x0400) /* ADC12 Internal Channel 2 select */ +#define ADC12ICH3MAP (0x0800) /* ADC12 Internal Channel 3 select */ + +/* ADC12CTL3 Control Bits */ +#define ADC12CSTARTADD0_L (0x0001) /* ADC12 Conversion Start Address Bit: 0 */ +#define ADC12CSTARTADD1_L (0x0002) /* ADC12 Conversion Start Address Bit: 1 */ +#define ADC12CSTARTADD2_L (0x0004) /* ADC12 Conversion Start Address Bit: 2 */ +#define ADC12CSTARTADD3_L (0x0008) /* ADC12 Conversion Start Address Bit: 3 */ +#define ADC12CSTARTADD4_L (0x0010) /* ADC12 Conversion Start Address Bit: 4 */ +#define ADC12BATMAP_L (0x0040) /* ADC12 Internal AVCC/2 select */ +#define ADC12TCMAP_L (0x0080) /* ADC12 Internal TempSensor select */ + +/* ADC12CTL3 Control Bits */ +#define ADC12ICH0MAP_H (0x0001) /* ADC12 Internal Channel 0 select */ +#define ADC12ICH1MAP_H (0x0002) /* ADC12 Internal Channel 1 select */ +#define ADC12ICH2MAP_H (0x0004) /* ADC12 Internal Channel 2 select */ +#define ADC12ICH3MAP_H (0x0008) /* ADC12 Internal Channel 3 select */ + +#define ADC12CSTARTADD_0 (0x0000) /* ADC12 Conversion Start Address: 0 */ +#define ADC12CSTARTADD_1 (0x0001) /* ADC12 Conversion Start Address: 1 */ +#define ADC12CSTARTADD_2 (0x0002) /* ADC12 Conversion Start Address: 2 */ +#define ADC12CSTARTADD_3 (0x0003) /* ADC12 Conversion Start Address: 3 */ +#define ADC12CSTARTADD_4 (0x0004) /* ADC12 Conversion Start Address: 4 */ +#define ADC12CSTARTADD_5 (0x0005) /* ADC12 Conversion Start Address: 5 */ +#define ADC12CSTARTADD_6 (0x0006) /* ADC12 Conversion Start Address: 6 */ +#define ADC12CSTARTADD_7 (0x0007) /* ADC12 Conversion Start Address: 7 */ +#define ADC12CSTARTADD_8 (0x0008) /* ADC12 Conversion Start Address: 8 */ +#define ADC12CSTARTADD_9 (0x0009) /* ADC12 Conversion Start Address: 9 */ +#define ADC12CSTARTADD_10 (0x000A) /* ADC12 Conversion Start Address: 10 */ +#define ADC12CSTARTADD_11 (0x000B) /* ADC12 Conversion Start Address: 11 */ +#define ADC12CSTARTADD_12 (0x000C) /* ADC12 Conversion Start Address: 12 */ +#define ADC12CSTARTADD_13 (0x000D) /* ADC12 Conversion Start Address: 13 */ +#define ADC12CSTARTADD_14 (0x000E) /* ADC12 Conversion Start Address: 14 */ +#define ADC12CSTARTADD_15 (0x000F) /* ADC12 Conversion Start Address: 15 */ +#define ADC12CSTARTADD_16 (0x0010) /* ADC12 Conversion Start Address: 16 */ +#define ADC12CSTARTADD_17 (0x0011) /* ADC12 Conversion Start Address: 17 */ +#define ADC12CSTARTADD_18 (0x0012) /* ADC12 Conversion Start Address: 18 */ +#define ADC12CSTARTADD_19 (0x0013) /* ADC12 Conversion Start Address: 19 */ +#define ADC12CSTARTADD_20 (0x0014) /* ADC12 Conversion Start Address: 20 */ +#define ADC12CSTARTADD_21 (0x0015) /* ADC12 Conversion Start Address: 21 */ +#define ADC12CSTARTADD_22 (0x0016) /* ADC12 Conversion Start Address: 22 */ +#define ADC12CSTARTADD_23 (0x0017) /* ADC12 Conversion Start Address: 23 */ +#define ADC12CSTARTADD_24 (0x0018) /* ADC12 Conversion Start Address: 24 */ +#define ADC12CSTARTADD_25 (0x0019) /* ADC12 Conversion Start Address: 25 */ +#define ADC12CSTARTADD_26 (0x001A) /* ADC12 Conversion Start Address: 26 */ +#define ADC12CSTARTADD_27 (0x001B) /* ADC12 Conversion Start Address: 27 */ +#define ADC12CSTARTADD_28 (0x001C) /* ADC12 Conversion Start Address: 28 */ +#define ADC12CSTARTADD_29 (0x001D) /* ADC12 Conversion Start Address: 29 */ +#define ADC12CSTARTADD_30 (0x001E) /* ADC12 Conversion Start Address: 30 */ +#define ADC12CSTARTADD_31 (0x001F) /* ADC12 Conversion Start Address: 31 */ + +/* ADC12MCTLx Control Bits */ +#define ADC12INCH0 (0x0001) /* ADC12 Input Channel Select Bit 0 */ +#define ADC12INCH1 (0x0002) /* ADC12 Input Channel Select Bit 1 */ +#define ADC12INCH2 (0x0004) /* ADC12 Input Channel Select Bit 2 */ +#define ADC12INCH3 (0x0008) /* ADC12 Input Channel Select Bit 3 */ +#define ADC12INCH4 (0x0010) /* ADC12 Input Channel Select Bit 4 */ +#define ADC12EOS (0x0080) /* ADC12 End of Sequence */ +#define ADC12VRSEL0 (0x0100) /* ADC12 VR Select Bit 0 */ +#define ADC12VRSEL1 (0x0200) /* ADC12 VR Select Bit 1 */ +#define ADC12VRSEL2 (0x0400) /* ADC12 VR Select Bit 2 */ +#define ADC12VRSEL3 (0x0800) /* ADC12 VR Select Bit 3 */ +#define ADC12DIF (0x2000) /* ADC12 Differential mode (only for even Registers) */ +#define ADC12WINC (0x4000) /* ADC12 Comparator window enable */ + +/* ADC12MCTLx Control Bits */ +#define ADC12INCH0_L (0x0001) /* ADC12 Input Channel Select Bit 0 */ +#define ADC12INCH1_L (0x0002) /* ADC12 Input Channel Select Bit 1 */ +#define ADC12INCH2_L (0x0004) /* ADC12 Input Channel Select Bit 2 */ +#define ADC12INCH3_L (0x0008) /* ADC12 Input Channel Select Bit 3 */ +#define ADC12INCH4_L (0x0010) /* ADC12 Input Channel Select Bit 4 */ +#define ADC12EOS_L (0x0080) /* ADC12 End of Sequence */ + +/* ADC12MCTLx Control Bits */ +#define ADC12VRSEL0_H (0x0001) /* ADC12 VR Select Bit 0 */ +#define ADC12VRSEL1_H (0x0002) /* ADC12 VR Select Bit 1 */ +#define ADC12VRSEL2_H (0x0004) /* ADC12 VR Select Bit 2 */ +#define ADC12VRSEL3_H (0x0008) /* ADC12 VR Select Bit 3 */ +#define ADC12DIF_H (0x0020) /* ADC12 Differential mode (only for even Registers) */ +#define ADC12WINC_H (0x0040) /* ADC12 Comparator window enable */ + +#define ADC12INCH_0 (0x0000) /* ADC12 Input Channel 0 */ +#define ADC12INCH_1 (0x0001) /* ADC12 Input Channel 1 */ +#define ADC12INCH_2 (0x0002) /* ADC12 Input Channel 2 */ +#define ADC12INCH_3 (0x0003) /* ADC12 Input Channel 3 */ +#define ADC12INCH_4 (0x0004) /* ADC12 Input Channel 4 */ +#define ADC12INCH_5 (0x0005) /* ADC12 Input Channel 5 */ +#define ADC12INCH_6 (0x0006) /* ADC12 Input Channel 6 */ +#define ADC12INCH_7 (0x0007) /* ADC12 Input Channel 7 */ +#define ADC12INCH_8 (0x0008) /* ADC12 Input Channel 8 */ +#define ADC12INCH_9 (0x0009) /* ADC12 Input Channel 9 */ +#define ADC12INCH_10 (0x000A) /* ADC12 Input Channel 10 */ +#define ADC12INCH_11 (0x000B) /* ADC12 Input Channel 11 */ +#define ADC12INCH_12 (0x000C) /* ADC12 Input Channel 12 */ +#define ADC12INCH_13 (0x000D) /* ADC12 Input Channel 13 */ +#define ADC12INCH_14 (0x000E) /* ADC12 Input Channel 14 */ +#define ADC12INCH_15 (0x000F) /* ADC12 Input Channel 15 */ +#define ADC12INCH_16 (0x0010) /* ADC12 Input Channel 16 */ +#define ADC12INCH_17 (0x0011) /* ADC12 Input Channel 17 */ +#define ADC12INCH_18 (0x0012) /* ADC12 Input Channel 18 */ +#define ADC12INCH_19 (0x0013) /* ADC12 Input Channel 19 */ +#define ADC12INCH_20 (0x0014) /* ADC12 Input Channel 20 */ +#define ADC12INCH_21 (0x0015) /* ADC12 Input Channel 21 */ +#define ADC12INCH_22 (0x0016) /* ADC12 Input Channel 22 */ +#define ADC12INCH_23 (0x0017) /* ADC12 Input Channel 23 */ +#define ADC12INCH_24 (0x0018) /* ADC12 Input Channel 24 */ +#define ADC12INCH_25 (0x0019) /* ADC12 Input Channel 25 */ +#define ADC12INCH_26 (0x001A) /* ADC12 Input Channel 26 */ +#define ADC12INCH_27 (0x001B) /* ADC12 Input Channel 27 */ +#define ADC12INCH_28 (0x001C) /* ADC12 Input Channel 28 */ +#define ADC12INCH_29 (0x001D) /* ADC12 Input Channel 29 */ +#define ADC12INCH_30 (0x001E) /* ADC12 Input Channel 30 */ +#define ADC12INCH_31 (0x001F) /* ADC12 Input Channel 31 */ + +#define ADC12VRSEL_0 (0x0000) /* ADC12 Select Reference 0 */ +#define ADC12VRSEL_1 (0x0100) /* ADC12 Select Reference 1 */ +#define ADC12VRSEL_2 (0x0200) /* ADC12 Select Reference 2 */ +#define ADC12VRSEL_3 (0x0300) /* ADC12 Select Reference 3 */ +#define ADC12VRSEL_4 (0x0400) /* ADC12 Select Reference 4 */ +#define ADC12VRSEL_5 (0x0500) /* ADC12 Select Reference 5 */ +#define ADC12VRSEL_6 (0x0600) /* ADC12 Select Reference 6 */ +#define ADC12VRSEL_7 (0x0700) /* ADC12 Select Reference 7 */ +#define ADC12VRSEL_8 (0x0800) /* ADC12 Select Reference 8 */ +#define ADC12VRSEL_9 (0x0900) /* ADC12 Select Reference 9 */ +#define ADC12VRSEL_10 (0x0A00) /* ADC12 Select Reference 10 */ +#define ADC12VRSEL_11 (0x0B00) /* ADC12 Select Reference 11 */ +#define ADC12VRSEL_12 (0x0C00) /* ADC12 Select Reference 12 */ +#define ADC12VRSEL_13 (0x0D00) /* ADC12 Select Reference 13 */ +#define ADC12VRSEL_14 (0x0E00) /* ADC12 Select Reference 14 */ +#define ADC12VRSEL_15 (0x0F00) /* ADC12 Select Reference 15 */ + +/* ADC12HI Control Bits */ + +/* ADC12LO Control Bits */ + +/* ADC12IER0 Control Bits */ +#define ADC12IE0 (0x0001) /* ADC12 Memory 0 Interrupt Enable */ +#define ADC12IE1 (0x0002) /* ADC12 Memory 1 Interrupt Enable */ +#define ADC12IE2 (0x0004) /* ADC12 Memory 2 Interrupt Enable */ +#define ADC12IE3 (0x0008) /* ADC12 Memory 3 Interrupt Enable */ +#define ADC12IE4 (0x0010) /* ADC12 Memory 4 Interrupt Enable */ +#define ADC12IE5 (0x0020) /* ADC12 Memory 5 Interrupt Enable */ +#define ADC12IE6 (0x0040) /* ADC12 Memory 6 Interrupt Enable */ +#define ADC12IE7 (0x0080) /* ADC12 Memory 7 Interrupt Enable */ +#define ADC12IE8 (0x0100) /* ADC12 Memory 8 Interrupt Enable */ +#define ADC12IE9 (0x0200) /* ADC12 Memory 9 Interrupt Enable */ +#define ADC12IE10 (0x0400) /* ADC12 Memory 10 Interrupt Enable */ +#define ADC12IE11 (0x0800) /* ADC12 Memory 11 Interrupt Enable */ +#define ADC12IE12 (0x1000) /* ADC12 Memory 12 Interrupt Enable */ +#define ADC12IE13 (0x2000) /* ADC12 Memory 13 Interrupt Enable */ +#define ADC12IE14 (0x4000) /* ADC12 Memory 14 Interrupt Enable */ +#define ADC12IE15 (0x8000) /* ADC12 Memory 15 Interrupt Enable */ + +/* ADC12IER0 Control Bits */ +#define ADC12IE0_L (0x0001) /* ADC12 Memory 0 Interrupt Enable */ +#define ADC12IE1_L (0x0002) /* ADC12 Memory 1 Interrupt Enable */ +#define ADC12IE2_L (0x0004) /* ADC12 Memory 2 Interrupt Enable */ +#define ADC12IE3_L (0x0008) /* ADC12 Memory 3 Interrupt Enable */ +#define ADC12IE4_L (0x0010) /* ADC12 Memory 4 Interrupt Enable */ +#define ADC12IE5_L (0x0020) /* ADC12 Memory 5 Interrupt Enable */ +#define ADC12IE6_L (0x0040) /* ADC12 Memory 6 Interrupt Enable */ +#define ADC12IE7_L (0x0080) /* ADC12 Memory 7 Interrupt Enable */ + +/* ADC12IER0 Control Bits */ +#define ADC12IE8_H (0x0001) /* ADC12 Memory 8 Interrupt Enable */ +#define ADC12IE9_H (0x0002) /* ADC12 Memory 9 Interrupt Enable */ +#define ADC12IE10_H (0x0004) /* ADC12 Memory 10 Interrupt Enable */ +#define ADC12IE11_H (0x0008) /* ADC12 Memory 11 Interrupt Enable */ +#define ADC12IE12_H (0x0010) /* ADC12 Memory 12 Interrupt Enable */ +#define ADC12IE13_H (0x0020) /* ADC12 Memory 13 Interrupt Enable */ +#define ADC12IE14_H (0x0040) /* ADC12 Memory 14 Interrupt Enable */ +#define ADC12IE15_H (0x0080) /* ADC12 Memory 15 Interrupt Enable */ + +/* ADC12IER1 Control Bits */ +#define ADC12IE16 (0x0001) /* ADC12 Memory 16 Interrupt Enable */ +#define ADC12IE17 (0x0002) /* ADC12 Memory 17 Interrupt Enable */ +#define ADC12IE18 (0x0004) /* ADC12 Memory 18 Interrupt Enable */ +#define ADC12IE19 (0x0008) /* ADC12 Memory 19 Interrupt Enable */ +#define ADC12IE20 (0x0010) /* ADC12 Memory 20 Interrupt Enable */ +#define ADC12IE21 (0x0020) /* ADC12 Memory 21 Interrupt Enable */ +#define ADC12IE22 (0x0040) /* ADC12 Memory 22 Interrupt Enable */ +#define ADC12IE23 (0x0080) /* ADC12 Memory 23 Interrupt Enable */ +#define ADC12IE24 (0x0100) /* ADC12 Memory 24 Interrupt Enable */ +#define ADC12IE25 (0x0200) /* ADC12 Memory 25 Interrupt Enable */ +#define ADC12IE26 (0x0400) /* ADC12 Memory 26 Interrupt Enable */ +#define ADC12IE27 (0x0800) /* ADC12 Memory 27 Interrupt Enable */ +#define ADC12IE28 (0x1000) /* ADC12 Memory 28 Interrupt Enable */ +#define ADC12IE29 (0x2000) /* ADC12 Memory 29 Interrupt Enable */ +#define ADC12IE30 (0x4000) /* ADC12 Memory 30 Interrupt Enable */ +#define ADC12IE31 (0x8000) /* ADC12 Memory 31 Interrupt Enable */ + +/* ADC12IER1 Control Bits */ +#define ADC12IE16_L (0x0001) /* ADC12 Memory 16 Interrupt Enable */ +#define ADC12IE17_L (0x0002) /* ADC12 Memory 17 Interrupt Enable */ +#define ADC12IE18_L (0x0004) /* ADC12 Memory 18 Interrupt Enable */ +#define ADC12IE19_L (0x0008) /* ADC12 Memory 19 Interrupt Enable */ +#define ADC12IE20_L (0x0010) /* ADC12 Memory 20 Interrupt Enable */ +#define ADC12IE21_L (0x0020) /* ADC12 Memory 21 Interrupt Enable */ +#define ADC12IE22_L (0x0040) /* ADC12 Memory 22 Interrupt Enable */ +#define ADC12IE23_L (0x0080) /* ADC12 Memory 23 Interrupt Enable */ + +/* ADC12IER1 Control Bits */ +#define ADC12IE24_H (0x0001) /* ADC12 Memory 24 Interrupt Enable */ +#define ADC12IE25_H (0x0002) /* ADC12 Memory 25 Interrupt Enable */ +#define ADC12IE26_H (0x0004) /* ADC12 Memory 26 Interrupt Enable */ +#define ADC12IE27_H (0x0008) /* ADC12 Memory 27 Interrupt Enable */ +#define ADC12IE28_H (0x0010) /* ADC12 Memory 28 Interrupt Enable */ +#define ADC12IE29_H (0x0020) /* ADC12 Memory 29 Interrupt Enable */ +#define ADC12IE30_H (0x0040) /* ADC12 Memory 30 Interrupt Enable */ +#define ADC12IE31_H (0x0080) /* ADC12 Memory 31 Interrupt Enable */ + +/* ADC12IER2 Control Bits */ +#define ADC12INIE (0x0002) /* ADC12 Interrupt enable for the inside of window of the Window comparator */ +#define ADC12LOIE (0x0004) /* ADC12 Interrupt enable for lower threshold of the Window comparator */ +#define ADC12HIIE (0x0008) /* ADC12 Interrupt enable for upper threshold of the Window comparator */ +#define ADC12OVIE (0x0010) /* ADC12 ADC12MEMx Overflow interrupt enable */ +#define ADC12TOVIE (0x0020) /* ADC12 Timer Overflow interrupt enable */ +#define ADC12RDYIE (0x0040) /* ADC12 local buffered reference ready interrupt enable */ + +/* ADC12IER2 Control Bits */ +#define ADC12INIE_L (0x0002) /* ADC12 Interrupt enable for the inside of window of the Window comparator */ +#define ADC12LOIE_L (0x0004) /* ADC12 Interrupt enable for lower threshold of the Window comparator */ +#define ADC12HIIE_L (0x0008) /* ADC12 Interrupt enable for upper threshold of the Window comparator */ +#define ADC12OVIE_L (0x0010) /* ADC12 ADC12MEMx Overflow interrupt enable */ +#define ADC12TOVIE_L (0x0020) /* ADC12 Timer Overflow interrupt enable */ +#define ADC12RDYIE_L (0x0040) /* ADC12 local buffered reference ready interrupt enable */ + +/* ADC12IFGR0 Control Bits */ +#define ADC12IFG0 (0x0001) /* ADC12 Memory 0 Interrupt Flag */ +#define ADC12IFG1 (0x0002) /* ADC12 Memory 1 Interrupt Flag */ +#define ADC12IFG2 (0x0004) /* ADC12 Memory 2 Interrupt Flag */ +#define ADC12IFG3 (0x0008) /* ADC12 Memory 3 Interrupt Flag */ +#define ADC12IFG4 (0x0010) /* ADC12 Memory 4 Interrupt Flag */ +#define ADC12IFG5 (0x0020) /* ADC12 Memory 5 Interrupt Flag */ +#define ADC12IFG6 (0x0040) /* ADC12 Memory 6 Interrupt Flag */ +#define ADC12IFG7 (0x0080) /* ADC12 Memory 7 Interrupt Flag */ +#define ADC12IFG8 (0x0100) /* ADC12 Memory 8 Interrupt Flag */ +#define ADC12IFG9 (0x0200) /* ADC12 Memory 9 Interrupt Flag */ +#define ADC12IFG10 (0x0400) /* ADC12 Memory 10 Interrupt Flag */ +#define ADC12IFG11 (0x0800) /* ADC12 Memory 11 Interrupt Flag */ +#define ADC12IFG12 (0x1000) /* ADC12 Memory 12 Interrupt Flag */ +#define ADC12IFG13 (0x2000) /* ADC12 Memory 13 Interrupt Flag */ +#define ADC12IFG14 (0x4000) /* ADC12 Memory 14 Interrupt Flag */ +#define ADC12IFG15 (0x8000) /* ADC12 Memory 15 Interrupt Flag */ + +/* ADC12IFGR0 Control Bits */ +#define ADC12IFG0_L (0x0001) /* ADC12 Memory 0 Interrupt Flag */ +#define ADC12IFG1_L (0x0002) /* ADC12 Memory 1 Interrupt Flag */ +#define ADC12IFG2_L (0x0004) /* ADC12 Memory 2 Interrupt Flag */ +#define ADC12IFG3_L (0x0008) /* ADC12 Memory 3 Interrupt Flag */ +#define ADC12IFG4_L (0x0010) /* ADC12 Memory 4 Interrupt Flag */ +#define ADC12IFG5_L (0x0020) /* ADC12 Memory 5 Interrupt Flag */ +#define ADC12IFG6_L (0x0040) /* ADC12 Memory 6 Interrupt Flag */ +#define ADC12IFG7_L (0x0080) /* ADC12 Memory 7 Interrupt Flag */ + +/* ADC12IFGR0 Control Bits */ +#define ADC12IFG8_H (0x0001) /* ADC12 Memory 8 Interrupt Flag */ +#define ADC12IFG9_H (0x0002) /* ADC12 Memory 9 Interrupt Flag */ +#define ADC12IFG10_H (0x0004) /* ADC12 Memory 10 Interrupt Flag */ +#define ADC12IFG11_H (0x0008) /* ADC12 Memory 11 Interrupt Flag */ +#define ADC12IFG12_H (0x0010) /* ADC12 Memory 12 Interrupt Flag */ +#define ADC12IFG13_H (0x0020) /* ADC12 Memory 13 Interrupt Flag */ +#define ADC12IFG14_H (0x0040) /* ADC12 Memory 14 Interrupt Flag */ +#define ADC12IFG15_H (0x0080) /* ADC12 Memory 15 Interrupt Flag */ + +/* ADC12IFGR1 Control Bits */ +#define ADC12IFG16 (0x0001) /* ADC12 Memory 16 Interrupt Flag */ +#define ADC12IFG17 (0x0002) /* ADC12 Memory 17 Interrupt Flag */ +#define ADC12IFG18 (0x0004) /* ADC12 Memory 18 Interrupt Flag */ +#define ADC12IFG19 (0x0008) /* ADC12 Memory 19 Interrupt Flag */ +#define ADC12IFG20 (0x0010) /* ADC12 Memory 20 Interrupt Flag */ +#define ADC12IFG21 (0x0020) /* ADC12 Memory 21 Interrupt Flag */ +#define ADC12IFG22 (0x0040) /* ADC12 Memory 22 Interrupt Flag */ +#define ADC12IFG23 (0x0080) /* ADC12 Memory 23 Interrupt Flag */ +#define ADC12IFG24 (0x0100) /* ADC12 Memory 24 Interrupt Flag */ +#define ADC12IFG25 (0x0200) /* ADC12 Memory 25 Interrupt Flag */ +#define ADC12IFG26 (0x0400) /* ADC12 Memory 26 Interrupt Flag */ +#define ADC12IFG27 (0x0800) /* ADC12 Memory 27 Interrupt Flag */ +#define ADC12IFG28 (0x1000) /* ADC12 Memory 28 Interrupt Flag */ +#define ADC12IFG29 (0x2000) /* ADC12 Memory 29 Interrupt Flag */ +#define ADC12IFG30 (0x4000) /* ADC12 Memory 30 Interrupt Flag */ +#define ADC12IFG31 (0x8000) /* ADC12 Memory 31 Interrupt Flag */ + +/* ADC12IFGR1 Control Bits */ +#define ADC12IFG16_L (0x0001) /* ADC12 Memory 16 Interrupt Flag */ +#define ADC12IFG17_L (0x0002) /* ADC12 Memory 17 Interrupt Flag */ +#define ADC12IFG18_L (0x0004) /* ADC12 Memory 18 Interrupt Flag */ +#define ADC12IFG19_L (0x0008) /* ADC12 Memory 19 Interrupt Flag */ +#define ADC12IFG20_L (0x0010) /* ADC12 Memory 20 Interrupt Flag */ +#define ADC12IFG21_L (0x0020) /* ADC12 Memory 21 Interrupt Flag */ +#define ADC12IFG22_L (0x0040) /* ADC12 Memory 22 Interrupt Flag */ +#define ADC12IFG23_L (0x0080) /* ADC12 Memory 23 Interrupt Flag */ + +/* ADC12IFGR1 Control Bits */ +#define ADC12IFG24_H (0x0001) /* ADC12 Memory 24 Interrupt Flag */ +#define ADC12IFG25_H (0x0002) /* ADC12 Memory 25 Interrupt Flag */ +#define ADC12IFG26_H (0x0004) /* ADC12 Memory 26 Interrupt Flag */ +#define ADC12IFG27_H (0x0008) /* ADC12 Memory 27 Interrupt Flag */ +#define ADC12IFG28_H (0x0010) /* ADC12 Memory 28 Interrupt Flag */ +#define ADC12IFG29_H (0x0020) /* ADC12 Memory 29 Interrupt Flag */ +#define ADC12IFG30_H (0x0040) /* ADC12 Memory 30 Interrupt Flag */ +#define ADC12IFG31_H (0x0080) /* ADC12 Memory 31 Interrupt Flag */ + +/* ADC12IFGR2 Control Bits */ +#define ADC12INIFG (0x0002) /* ADC12 Interrupt Flag for the inside of window of the Window comparator */ +#define ADC12LOIFG (0x0004) /* ADC12 Interrupt Flag for lower threshold of the Window comparator */ +#define ADC12HIIFG (0x0008) /* ADC12 Interrupt Flag for upper threshold of the Window comparator */ +#define ADC12OVIFG (0x0010) /* ADC12 ADC12MEMx Overflow interrupt Flag */ +#define ADC12TOVIFG (0x0020) /* ADC12 Timer Overflow interrupt Flag */ +#define ADC12RDYIFG (0x0040) /* ADC12 local buffered reference ready interrupt Flag */ + +/* ADC12IFGR2 Control Bits */ +#define ADC12INIFG_L (0x0002) /* ADC12 Interrupt Flag for the inside of window of the Window comparator */ +#define ADC12LOIFG_L (0x0004) /* ADC12 Interrupt Flag for lower threshold of the Window comparator */ +#define ADC12HIIFG_L (0x0008) /* ADC12 Interrupt Flag for upper threshold of the Window comparator */ +#define ADC12OVIFG_L (0x0010) /* ADC12 ADC12MEMx Overflow interrupt Flag */ +#define ADC12TOVIFG_L (0x0020) /* ADC12 Timer Overflow interrupt Flag */ +#define ADC12RDYIFG_L (0x0040) /* ADC12 local buffered reference ready interrupt Flag */ + +/* ADC12IV Definitions */ +#define ADC12IV_NONE (0x0000) /* No Interrupt pending */ +#define ADC12IV_ADC12OVIFG (0x0002) /* ADC12OVIFG */ +#define ADC12IV_ADC12TOVIFG (0x0004) /* ADC12TOVIFG */ +#define ADC12IV_ADC12HIIFG (0x0006) /* ADC12HIIFG */ +#define ADC12IV_ADC12LOIFG (0x0008) /* ADC12LOIFG */ +#define ADC12IV_ADC12INIFG (0x000A) /* ADC12INIFG */ +#define ADC12IV_ADC12IFG0 (0x000C) /* ADC12IFG0 */ +#define ADC12IV_ADC12IFG1 (0x000E) /* ADC12IFG1 */ +#define ADC12IV_ADC12IFG2 (0x0010) /* ADC12IFG2 */ +#define ADC12IV_ADC12IFG3 (0x0012) /* ADC12IFG3 */ +#define ADC12IV_ADC12IFG4 (0x0014) /* ADC12IFG4 */ +#define ADC12IV_ADC12IFG5 (0x0016) /* ADC12IFG5 */ +#define ADC12IV_ADC12IFG6 (0x0018) /* ADC12IFG6 */ +#define ADC12IV_ADC12IFG7 (0x001A) /* ADC12IFG7 */ +#define ADC12IV_ADC12IFG8 (0x001C) /* ADC12IFG8 */ +#define ADC12IV_ADC12IFG9 (0x001E) /* ADC12IFG9 */ +#define ADC12IV_ADC12IFG10 (0x0020) /* ADC12IFG10 */ +#define ADC12IV_ADC12IFG11 (0x0022) /* ADC12IFG11 */ +#define ADC12IV_ADC12IFG12 (0x0024) /* ADC12IFG12 */ +#define ADC12IV_ADC12IFG13 (0x0026) /* ADC12IFG13 */ +#define ADC12IV_ADC12IFG14 (0x0028) /* ADC12IFG14 */ +#define ADC12IV_ADC12IFG15 (0x002A) /* ADC12IFG15 */ +#define ADC12IV_ADC12IFG16 (0x002C) /* ADC12IFG16 */ +#define ADC12IV_ADC12IFG17 (0x002E) /* ADC12IFG17 */ +#define ADC12IV_ADC12IFG18 (0x0030) /* ADC12IFG18 */ +#define ADC12IV_ADC12IFG19 (0x0032) /* ADC12IFG19 */ +#define ADC12IV_ADC12IFG20 (0x0034) /* ADC12IFG20 */ +#define ADC12IV_ADC12IFG21 (0x0036) /* ADC12IFG21 */ +#define ADC12IV_ADC12IFG22 (0x0038) /* ADC12IFG22 */ +#define ADC12IV_ADC12IFG23 (0x003A) /* ADC12IFG23 */ +#define ADC12IV_ADC12IFG24 (0x003C) /* ADC12IFG24 */ +#define ADC12IV_ADC12IFG25 (0x003E) /* ADC12IFG25 */ +#define ADC12IV_ADC12IFG26 (0x0040) /* ADC12IFG26 */ +#define ADC12IV_ADC12IFG27 (0x0042) /* ADC12IFG27 */ +#define ADC12IV_ADC12IFG28 (0x0044) /* ADC12IFG28 */ +#define ADC12IV_ADC12IFG29 (0x0046) /* ADC12IFG29 */ +#define ADC12IV_ADC12IFG30 (0x0048) /* ADC12IFG30 */ +#define ADC12IV_ADC12IFG31 (0x004A) /* ADC12IFG31 */ +#define ADC12IV_ADC12RDYIFG (0x004C) /* ADC12RDYIFG */ + + +/************************************************************ +* AES256 Accelerator +************************************************************/ +#define __MSP430_HAS_AES256__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_AES256__ 0x09C0 +#define AES256_BASE __MSP430_BASEADDRESS_AES256__ + +sfr_w(AESACTL0); /* AES accelerator control register 0 */ +sfr_b(AESACTL0_L); /* AES accelerator control register 0 */ +sfr_b(AESACTL0_H); /* AES accelerator control register 0 */ +sfr_w(AESACTL1); /* AES accelerator control register 1 */ +sfr_b(AESACTL1_L); /* AES accelerator control register 1 */ +sfr_b(AESACTL1_H); /* AES accelerator control register 1 */ +sfr_w(AESASTAT); /* AES accelerator status register */ +sfr_b(AESASTAT_L); /* AES accelerator status register */ +sfr_b(AESASTAT_H); /* AES accelerator status register */ +sfr_w(AESAKEY); /* AES accelerator key register */ +sfr_b(AESAKEY_L); /* AES accelerator key register */ +sfr_b(AESAKEY_H); /* AES accelerator key register */ +sfr_w(AESADIN); /* AES accelerator data in register */ +sfr_b(AESADIN_L); /* AES accelerator data in register */ +sfr_b(AESADIN_H); /* AES accelerator data in register */ +sfr_w(AESADOUT); /* AES accelerator data out register */ +sfr_b(AESADOUT_L); /* AES accelerator data out register */ +sfr_b(AESADOUT_H); /* AES accelerator data out register */ +sfr_w(AESAXDIN); /* AES accelerator XORed data in register */ +sfr_b(AESAXDIN_L); /* AES accelerator XORed data in register */ +sfr_b(AESAXDIN_H); /* AES accelerator XORed data in register */ +sfr_w(AESAXIN); /* AES accelerator XORed data in register (no trigger) */ +sfr_b(AESAXIN_L); /* AES accelerator XORed data in register (no trigger) */ +sfr_b(AESAXIN_H); /* AES accelerator XORed data in register (no trigger) */ + +/* AESACTL0 Control Bits */ +#define AESOP0 (0x0001) /* AES Operation Bit: 0 */ +#define AESOP1 (0x0002) /* AES Operation Bit: 1 */ +#define AESKL0 (0x0004) /* AES Key length Bit: 0 */ +#define AESKL1 (0x0008) /* AES Key length Bit: 1 */ +#define AESTRIG (0x0010) /* AES Trigger Select */ +#define AESCM0 (0x0020) /* AES Cipher mode select Bit: 0 */ +#define AESCM1 (0x0040) /* AES Cipher mode select Bit: 1 */ +#define AESSWRST (0x0080) /* AES Software Reset */ +#define AESRDYIFG (0x0100) /* AES ready interrupt flag */ +#define AESERRFG (0x0800) /* AES Error Flag */ +#define AESRDYIE (0x1000) /* AES ready interrupt enable*/ +#define AESCMEN (0x8000) /* AES DMA cipher mode enable*/ + +/* AESACTL0 Control Bits */ +#define AESOP0_L (0x0001) /* AES Operation Bit: 0 */ +#define AESOP1_L (0x0002) /* AES Operation Bit: 1 */ +#define AESKL0_L (0x0004) /* AES Key length Bit: 0 */ +#define AESKL1_L (0x0008) /* AES Key length Bit: 1 */ +#define AESTRIG_L (0x0010) /* AES Trigger Select */ +#define AESCM0_L (0x0020) /* AES Cipher mode select Bit: 0 */ +#define AESCM1_L (0x0040) /* AES Cipher mode select Bit: 1 */ +#define AESSWRST_L (0x0080) /* AES Software Reset */ + +/* AESACTL0 Control Bits */ +#define AESRDYIFG_H (0x0001) /* AES ready interrupt flag */ +#define AESERRFG_H (0x0008) /* AES Error Flag */ +#define AESRDYIE_H (0x0010) /* AES ready interrupt enable*/ +#define AESCMEN_H (0x0080) /* AES DMA cipher mode enable*/ + +#define AESOP_0 (0x0000) /* AES Operation: Encrypt */ +#define AESOP_1 (0x0001) /* AES Operation: Decrypt (same Key) */ +#define AESOP_2 (0x0002) /* AES Operation: Generate first round Key */ +#define AESOP_3 (0x0003) /* AES Operation: Decrypt (first round Key) */ + +#define AESKL_0 (0x0000) /* AES Key length: AES128 */ +#define AESKL_1 (0x0004) /* AES Key length: AES192 */ +#define AESKL_2 (0x0008) /* AES Key length: AES256 */ +#define AESKL__128 (0x0000) /* AES Key length: AES128 */ +#define AESKL__192 (0x0004) /* AES Key length: AES192 */ +#define AESKL__256 (0x0008) /* AES Key length: AES256 */ + +#define AESCM_0 (0x0000) /* AES Cipher mode select: ECB */ +#define AESCM_1 (0x0020) /* AES Cipher mode select: CBC */ +#define AESCM_2 (0x0040) /* AES Cipher mode select: OFB */ +#define AESCM_3 (0x0060) /* AES Cipher mode select: CFB */ +#define AESCM__ECB (0x0000) /* AES Cipher mode select: ECB */ +#define AESCM__CBC (0x0020) /* AES Cipher mode select: CBC */ +#define AESCM__OFB (0x0040) /* AES Cipher mode select: OFB */ +#define AESCM__CFB (0x0060) /* AES Cipher mode select: CFB */ + +/* AESACTL1 Control Bits */ +#define AESBLKCNT0 (0x0001) /* AES Cipher Block Counter Bit: 0 */ +#define AESBLKCNT1 (0x0002) /* AES Cipher Block Counter Bit: 1 */ +#define AESBLKCNT2 (0x0004) /* AES Cipher Block Counter Bit: 2 */ +#define AESBLKCNT3 (0x0008) /* AES Cipher Block Counter Bit: 3 */ +#define AESBLKCNT4 (0x0010) /* AES Cipher Block Counter Bit: 4 */ +#define AESBLKCNT5 (0x0020) /* AES Cipher Block Counter Bit: 5 */ +#define AESBLKCNT6 (0x0040) /* AES Cipher Block Counter Bit: 6 */ +#define AESBLKCNT7 (0x0080) /* AES Cipher Block Counter Bit: 7 */ + +/* AESACTL1 Control Bits */ +#define AESBLKCNT0_L (0x0001) /* AES Cipher Block Counter Bit: 0 */ +#define AESBLKCNT1_L (0x0002) /* AES Cipher Block Counter Bit: 1 */ +#define AESBLKCNT2_L (0x0004) /* AES Cipher Block Counter Bit: 2 */ +#define AESBLKCNT3_L (0x0008) /* AES Cipher Block Counter Bit: 3 */ +#define AESBLKCNT4_L (0x0010) /* AES Cipher Block Counter Bit: 4 */ +#define AESBLKCNT5_L (0x0020) /* AES Cipher Block Counter Bit: 5 */ +#define AESBLKCNT6_L (0x0040) /* AES Cipher Block Counter Bit: 6 */ +#define AESBLKCNT7_L (0x0080) /* AES Cipher Block Counter Bit: 7 */ + +/* AESASTAT Control Bits */ +#define AESBUSY (0x0001) /* AES Busy */ +#define AESKEYWR (0x0002) /* AES All 16 bytes written to AESAKEY */ +#define AESDINWR (0x0004) /* AES All 16 bytes written to AESADIN */ +#define AESDOUTRD (0x0008) /* AES All 16 bytes read from AESADOUT */ +#define AESKEYCNT0 (0x0010) /* AES Bytes written via AESAKEY Bit: 0 */ +#define AESKEYCNT1 (0x0020) /* AES Bytes written via AESAKEY Bit: 1 */ +#define AESKEYCNT2 (0x0040) /* AES Bytes written via AESAKEY Bit: 2 */ +#define AESKEYCNT3 (0x0080) /* AES Bytes written via AESAKEY Bit: 3 */ +#define AESDINCNT0 (0x0100) /* AES Bytes written via AESADIN Bit: 0 */ +#define AESDINCNT1 (0x0200) /* AES Bytes written via AESADIN Bit: 1 */ +#define AESDINCNT2 (0x0400) /* AES Bytes written via AESADIN Bit: 2 */ +#define AESDINCNT3 (0x0800) /* AES Bytes written via AESADIN Bit: 3 */ +#define AESDOUTCNT0 (0x1000) /* AES Bytes read via AESADOUT Bit: 0 */ +#define AESDOUTCNT1 (0x2000) /* AES Bytes read via AESADOUT Bit: 1 */ +#define AESDOUTCNT2 (0x4000) /* AES Bytes read via AESADOUT Bit: 2 */ +#define AESDOUTCNT3 (0x8000) /* AES Bytes read via AESADOUT Bit: 3 */ + +/* AESASTAT Control Bits */ +#define AESBUSY_L (0x0001) /* AES Busy */ +#define AESKEYWR_L (0x0002) /* AES All 16 bytes written to AESAKEY */ +#define AESDINWR_L (0x0004) /* AES All 16 bytes written to AESADIN */ +#define AESDOUTRD_L (0x0008) /* AES All 16 bytes read from AESADOUT */ +#define AESKEYCNT0_L (0x0010) /* AES Bytes written via AESAKEY Bit: 0 */ +#define AESKEYCNT1_L (0x0020) /* AES Bytes written via AESAKEY Bit: 1 */ +#define AESKEYCNT2_L (0x0040) /* AES Bytes written via AESAKEY Bit: 2 */ +#define AESKEYCNT3_L (0x0080) /* AES Bytes written via AESAKEY Bit: 3 */ + +/* AESASTAT Control Bits */ +#define AESDINCNT0_H (0x0001) /* AES Bytes written via AESADIN Bit: 0 */ +#define AESDINCNT1_H (0x0002) /* AES Bytes written via AESADIN Bit: 1 */ +#define AESDINCNT2_H (0x0004) /* AES Bytes written via AESADIN Bit: 2 */ +#define AESDINCNT3_H (0x0008) /* AES Bytes written via AESADIN Bit: 3 */ +#define AESDOUTCNT0_H (0x0010) /* AES Bytes read via AESADOUT Bit: 0 */ +#define AESDOUTCNT1_H (0x0020) /* AES Bytes read via AESADOUT Bit: 1 */ +#define AESDOUTCNT2_H (0x0040) /* AES Bytes read via AESADOUT Bit: 2 */ +#define AESDOUTCNT3_H (0x0080) /* AES Bytes read via AESADOUT Bit: 3 */ + +/************************************************************ +* Capacitive_Touch_IO 0 +************************************************************/ +#define __MSP430_HAS_CAP_TOUCH_IO_0__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_CAP_TOUCH_IO_0__ 0x0430 +#define CAP_TOUCH_0_BASE __MSP430_BASEADDRESS_CAP_TOUCH_IO_0__ + +sfr_w(CAPTIO0CTL); /* Capacitive_Touch_IO 0 control register */ +sfr_b(CAPTIO0CTL_L); /* Capacitive_Touch_IO 0 control register */ +sfr_b(CAPTIO0CTL_H); /* Capacitive_Touch_IO 0 control register */ + +#define CAPSIO0CTL CAPTIO0CTL /* legacy define */ + +/************************************************************ +* Capacitive_Touch_IO 1 +************************************************************/ +#define __MSP430_HAS_CAP_TOUCH_IO_1__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_CAP_TOUCH_IO_1__ 0x0470 +#define CAP_TOUCH_1_BASE __MSP430_BASEADDRESS_CAP_TOUCH_IO_1__ + +sfr_w(CAPTIO1CTL); /* Capacitive_Touch_IO 1 control register */ +sfr_b(CAPTIO1CTL_L); /* Capacitive_Touch_IO 1 control register */ +sfr_b(CAPTIO1CTL_H); /* Capacitive_Touch_IO 1 control register */ + +#define CAPSIO1CTL CAPTIO1CTL /* legacy define */ + +/* CAPTIOxCTL Control Bits */ +#define CAPTIOPISEL0 (0x0002) /* CapTouchIO Pin Select Bit: 0 */ +#define CAPTIOPISEL1 (0x0004) /* CapTouchIO Pin Select Bit: 1 */ +#define CAPTIOPISEL2 (0x0008) /* CapTouchIO Pin Select Bit: 2 */ +#define CAPTIOPOSEL0 (0x0010) /* CapTouchIO Port Select Bit: 0 */ +#define CAPTIOPOSEL1 (0x0020) /* CapTouchIO Port Select Bit: 1 */ +#define CAPTIOPOSEL2 (0x0040) /* CapTouchIO Port Select Bit: 2 */ +#define CAPTIOPOSEL3 (0x0080) /* CapTouchIO Port Select Bit: 3 */ +#define CAPTIOEN (0x0100) /* CapTouchIO Enable */ +#define CAPTIO (0x0200) /* CapTouchIO state */ + +/* CAPTIOxCTL Control Bits */ +#define CAPTIOPISEL0_L (0x0002) /* CapTouchIO Pin Select Bit: 0 */ +#define CAPTIOPISEL1_L (0x0004) /* CapTouchIO Pin Select Bit: 1 */ +#define CAPTIOPISEL2_L (0x0008) /* CapTouchIO Pin Select Bit: 2 */ +#define CAPTIOPOSEL0_L (0x0010) /* CapTouchIO Port Select Bit: 0 */ +#define CAPTIOPOSEL1_L (0x0020) /* CapTouchIO Port Select Bit: 1 */ +#define CAPTIOPOSEL2_L (0x0040) /* CapTouchIO Port Select Bit: 2 */ +#define CAPTIOPOSEL3_L (0x0080) /* CapTouchIO Port Select Bit: 3 */ + +/* CAPTIOxCTL Control Bits */ +#define CAPTIOEN_H (0x0001) /* CapTouchIO Enable */ +#define CAPTIO_H (0x0002) /* CapTouchIO state */ + +/* Legacy defines */ +#define CAPSIOPISEL0 (0x0002) /* CapTouchIO Pin Select Bit: 0 */ +#define CAPSIOPISEL1 (0x0004) /* CapTouchIO Pin Select Bit: 1 */ +#define CAPSIOPISEL2 (0x0008) /* CapTouchIO Pin Select Bit: 2 */ +#define CAPSIOPOSEL0 (0x0010) /* CapTouchIO Port Select Bit: 0 */ +#define CAPSIOPOSEL1 (0x0020) /* CapTouchIO Port Select Bit: 1 */ +#define CAPSIOPOSEL2 (0x0040) /* CapTouchIO Port Select Bit: 2 */ +#define CAPSIOPOSEL3 (0x0080) /* CapTouchIO Port Select Bit: 3 */ +#define CAPSIOEN (0x0100) /* CapTouchIO Enable */ +#define CAPSIO (0x0200) /* CapTouchIO state */ + +/************************************************************ +* Comparator E +************************************************************/ +#define __MSP430_HAS_COMP_E__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_COMP_E__ 0x08C0 +#define COMP_E_BASE __MSP430_BASEADDRESS_COMP_E__ + +sfr_w(CECTL0); /* Comparator E Control Register 0 */ +sfr_b(CECTL0_L); /* Comparator E Control Register 0 */ +sfr_b(CECTL0_H); /* Comparator E Control Register 0 */ +sfr_w(CECTL1); /* Comparator E Control Register 1 */ +sfr_b(CECTL1_L); /* Comparator E Control Register 1 */ +sfr_b(CECTL1_H); /* Comparator E Control Register 1 */ +sfr_w(CECTL2); /* Comparator E Control Register 2 */ +sfr_b(CECTL2_L); /* Comparator E Control Register 2 */ +sfr_b(CECTL2_H); /* Comparator E Control Register 2 */ +sfr_w(CECTL3); /* Comparator E Control Register 3 */ +sfr_b(CECTL3_L); /* Comparator E Control Register 3 */ +sfr_b(CECTL3_H); /* Comparator E Control Register 3 */ +sfr_w(CEINT); /* Comparator E Interrupt Register */ +sfr_b(CEINT_L); /* Comparator E Interrupt Register */ +sfr_b(CEINT_H); /* Comparator E Interrupt Register */ +sfr_w(CEIV); /* Comparator E Interrupt Vector Word */ +sfr_b(CEIV_L); /* Comparator E Interrupt Vector Word */ +sfr_b(CEIV_H); /* Comparator E Interrupt Vector Word */ + +/* CECTL0 Control Bits */ +#define CEIPSEL0 (0x0001) /* Comp. E Pos. Channel Input Select 0 */ +#define CEIPSEL1 (0x0002) /* Comp. E Pos. Channel Input Select 1 */ +#define CEIPSEL2 (0x0004) /* Comp. E Pos. Channel Input Select 2 */ +#define CEIPSEL3 (0x0008) /* Comp. E Pos. Channel Input Select 3 */ +//#define RESERVED (0x0010) /* Comp. E */ +//#define RESERVED (0x0020) /* Comp. E */ +//#define RESERVED (0x0040) /* Comp. E */ +#define CEIPEN (0x0080) /* Comp. E Pos. Channel Input Enable */ +#define CEIMSEL0 (0x0100) /* Comp. E Neg. Channel Input Select 0 */ +#define CEIMSEL1 (0x0200) /* Comp. E Neg. Channel Input Select 1 */ +#define CEIMSEL2 (0x0400) /* Comp. E Neg. Channel Input Select 2 */ +#define CEIMSEL3 (0x0800) /* Comp. E Neg. Channel Input Select 3 */ +//#define RESERVED (0x1000) /* Comp. E */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +#define CEIMEN (0x8000) /* Comp. E Neg. Channel Input Enable */ + +/* CECTL0 Control Bits */ +#define CEIPSEL0_L (0x0001) /* Comp. E Pos. Channel Input Select 0 */ +#define CEIPSEL1_L (0x0002) /* Comp. E Pos. Channel Input Select 1 */ +#define CEIPSEL2_L (0x0004) /* Comp. E Pos. Channel Input Select 2 */ +#define CEIPSEL3_L (0x0008) /* Comp. E Pos. Channel Input Select 3 */ +//#define RESERVED (0x0010) /* Comp. E */ +//#define RESERVED (0x0020) /* Comp. E */ +//#define RESERVED (0x0040) /* Comp. E */ +#define CEIPEN_L (0x0080) /* Comp. E Pos. Channel Input Enable */ +//#define RESERVED (0x1000) /* Comp. E */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ + +/* CECTL0 Control Bits */ +//#define RESERVED (0x0010) /* Comp. E */ +//#define RESERVED (0x0020) /* Comp. E */ +//#define RESERVED (0x0040) /* Comp. E */ +#define CEIMSEL0_H (0x0001) /* Comp. E Neg. Channel Input Select 0 */ +#define CEIMSEL1_H (0x0002) /* Comp. E Neg. Channel Input Select 1 */ +#define CEIMSEL2_H (0x0004) /* Comp. E Neg. Channel Input Select 2 */ +#define CEIMSEL3_H (0x0008) /* Comp. E Neg. Channel Input Select 3 */ +//#define RESERVED (0x1000) /* Comp. E */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +#define CEIMEN_H (0x0080) /* Comp. E Neg. Channel Input Enable */ + +#define CEIPSEL_0 (0x0000) /* Comp. E V+ terminal Input Select: Channel 0 */ +#define CEIPSEL_1 (0x0001) /* Comp. E V+ terminal Input Select: Channel 1 */ +#define CEIPSEL_2 (0x0002) /* Comp. E V+ terminal Input Select: Channel 2 */ +#define CEIPSEL_3 (0x0003) /* Comp. E V+ terminal Input Select: Channel 3 */ +#define CEIPSEL_4 (0x0004) /* Comp. E V+ terminal Input Select: Channel 4 */ +#define CEIPSEL_5 (0x0005) /* Comp. E V+ terminal Input Select: Channel 5 */ +#define CEIPSEL_6 (0x0006) /* Comp. E V+ terminal Input Select: Channel 6 */ +#define CEIPSEL_7 (0x0007) /* Comp. E V+ terminal Input Select: Channel 7 */ +#define CEIPSEL_8 (0x0008) /* Comp. E V+ terminal Input Select: Channel 8 */ +#define CEIPSEL_9 (0x0009) /* Comp. E V+ terminal Input Select: Channel 9 */ +#define CEIPSEL_10 (0x000A) /* Comp. E V+ terminal Input Select: Channel 10 */ +#define CEIPSEL_11 (0x000B) /* Comp. E V+ terminal Input Select: Channel 11 */ +#define CEIPSEL_12 (0x000C) /* Comp. E V+ terminal Input Select: Channel 12 */ +#define CEIPSEL_13 (0x000D) /* Comp. E V+ terminal Input Select: Channel 13 */ +#define CEIPSEL_14 (0x000E) /* Comp. E V+ terminal Input Select: Channel 14 */ +#define CEIPSEL_15 (0x000F) /* Comp. E V+ terminal Input Select: Channel 15 */ + +#define CEIMSEL_0 (0x0000) /* Comp. E V- Terminal Input Select: Channel 0 */ +#define CEIMSEL_1 (0x0100) /* Comp. E V- Terminal Input Select: Channel 1 */ +#define CEIMSEL_2 (0x0200) /* Comp. E V- Terminal Input Select: Channel 2 */ +#define CEIMSEL_3 (0x0300) /* Comp. E V- Terminal Input Select: Channel 3 */ +#define CEIMSEL_4 (0x0400) /* Comp. E V- Terminal Input Select: Channel 4 */ +#define CEIMSEL_5 (0x0500) /* Comp. E V- Terminal Input Select: Channel 5 */ +#define CEIMSEL_6 (0x0600) /* Comp. E V- Terminal Input Select: Channel 6 */ +#define CEIMSEL_7 (0x0700) /* Comp. E V- Terminal Input Select: Channel 7 */ +#define CEIMSEL_8 (0x0800) /* Comp. E V- terminal Input Select: Channel 8 */ +#define CEIMSEL_9 (0x0900) /* Comp. E V- terminal Input Select: Channel 9 */ +#define CEIMSEL_10 (0x0A00) /* Comp. E V- terminal Input Select: Channel 10 */ +#define CEIMSEL_11 (0x0B00) /* Comp. E V- terminal Input Select: Channel 11 */ +#define CEIMSEL_12 (0x0C00) /* Comp. E V- terminal Input Select: Channel 12 */ +#define CEIMSEL_13 (0x0D00) /* Comp. E V- terminal Input Select: Channel 13 */ +#define CEIMSEL_14 (0x0E00) /* Comp. E V- terminal Input Select: Channel 14 */ +#define CEIMSEL_15 (0x0F00) /* Comp. E V- terminal Input Select: Channel 15 */ + +/* CECTL1 Control Bits */ +#define CEOUT (0x0001) /* Comp. E Output */ +#define CEOUTPOL (0x0002) /* Comp. E Output Polarity */ +#define CEF (0x0004) /* Comp. E Enable Output Filter */ +#define CEIES (0x0008) /* Comp. E Interrupt Edge Select */ +#define CESHORT (0x0010) /* Comp. E Input Short */ +#define CEEX (0x0020) /* Comp. E Exchange Inputs */ +#define CEFDLY0 (0x0040) /* Comp. E Filter delay Bit 0 */ +#define CEFDLY1 (0x0080) /* Comp. E Filter delay Bit 1 */ +#define CEPWRMD0 (0x0100) /* Comp. E Power mode Bit 0 */ +#define CEPWRMD1 (0x0200) /* Comp. E Power mode Bit 1 */ +#define CEON (0x0400) /* Comp. E enable */ +#define CEMRVL (0x0800) /* Comp. E CEMRV Level */ +#define CEMRVS (0x1000) /* Comp. E Output selects between VREF0 or VREF1*/ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +//#define RESERVED (0x8000) /* Comp. E */ + +/* CECTL1 Control Bits */ +#define CEOUT_L (0x0001) /* Comp. E Output */ +#define CEOUTPOL_L (0x0002) /* Comp. E Output Polarity */ +#define CEF_L (0x0004) /* Comp. E Enable Output Filter */ +#define CEIES_L (0x0008) /* Comp. E Interrupt Edge Select */ +#define CESHORT_L (0x0010) /* Comp. E Input Short */ +#define CEEX_L (0x0020) /* Comp. E Exchange Inputs */ +#define CEFDLY0_L (0x0040) /* Comp. E Filter delay Bit 0 */ +#define CEFDLY1_L (0x0080) /* Comp. E Filter delay Bit 1 */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +//#define RESERVED (0x8000) /* Comp. E */ + +/* CECTL1 Control Bits */ +#define CEPWRMD0_H (0x0001) /* Comp. E Power mode Bit 0 */ +#define CEPWRMD1_H (0x0002) /* Comp. E Power mode Bit 1 */ +#define CEON_H (0x0004) /* Comp. E enable */ +#define CEMRVL_H (0x0008) /* Comp. E CEMRV Level */ +#define CEMRVS_H (0x0010) /* Comp. E Output selects between VREF0 or VREF1*/ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +//#define RESERVED (0x8000) /* Comp. E */ + +#define CEPWRMD_0 (0x0000) /* Comp. E Power mode 0 */ +#define CEPWRMD_1 (0x0100) /* Comp. E Power mode 1 */ +#define CEPWRMD_2 (0x0200) /* Comp. E Power mode 2 */ +#define CEPWRMD_3 (0x0300) /* Comp. E Power mode 3*/ + +#define CEFDLY_0 (0x0000) /* Comp. E Filter delay 0 : 450ns */ +#define CEFDLY_1 (0x0040) /* Comp. E Filter delay 1 : 900ns */ +#define CEFDLY_2 (0x0080) /* Comp. E Filter delay 2 : 1800ns */ +#define CEFDLY_3 (0x00C0) /* Comp. E Filter delay 3 : 3600ns */ + +/* CECTL2 Control Bits */ +#define CEREF00 (0x0001) /* Comp. E Reference 0 Resistor Select Bit : 0 */ +#define CEREF01 (0x0002) /* Comp. E Reference 0 Resistor Select Bit : 1 */ +#define CEREF02 (0x0004) /* Comp. E Reference 0 Resistor Select Bit : 2 */ +#define CEREF03 (0x0008) /* Comp. E Reference 0 Resistor Select Bit : 3 */ +#define CEREF04 (0x0010) /* Comp. E Reference 0 Resistor Select Bit : 4 */ +#define CERSEL (0x0020) /* Comp. E Reference select */ +#define CERS0 (0x0040) /* Comp. E Reference Source Bit : 0 */ +#define CERS1 (0x0080) /* Comp. E Reference Source Bit : 1 */ +#define CEREF10 (0x0100) /* Comp. E Reference 1 Resistor Select Bit : 0 */ +#define CEREF11 (0x0200) /* Comp. E Reference 1 Resistor Select Bit : 1 */ +#define CEREF12 (0x0400) /* Comp. E Reference 1 Resistor Select Bit : 2 */ +#define CEREF13 (0x0800) /* Comp. E Reference 1 Resistor Select Bit : 3 */ +#define CEREF14 (0x1000) /* Comp. E Reference 1 Resistor Select Bit : 4 */ +#define CEREFL0 (0x2000) /* Comp. E Reference voltage level Bit : 0 */ +#define CEREFL1 (0x4000) /* Comp. E Reference voltage level Bit : 1 */ +#define CEREFACC (0x8000) /* Comp. E Reference Accuracy */ + +/* CECTL2 Control Bits */ +#define CEREF00_L (0x0001) /* Comp. E Reference 0 Resistor Select Bit : 0 */ +#define CEREF01_L (0x0002) /* Comp. E Reference 0 Resistor Select Bit : 1 */ +#define CEREF02_L (0x0004) /* Comp. E Reference 0 Resistor Select Bit : 2 */ +#define CEREF03_L (0x0008) /* Comp. E Reference 0 Resistor Select Bit : 3 */ +#define CEREF04_L (0x0010) /* Comp. E Reference 0 Resistor Select Bit : 4 */ +#define CERSEL_L (0x0020) /* Comp. E Reference select */ +#define CERS0_L (0x0040) /* Comp. E Reference Source Bit : 0 */ +#define CERS1_L (0x0080) /* Comp. E Reference Source Bit : 1 */ + +/* CECTL2 Control Bits */ +#define CEREF10_H (0x0001) /* Comp. E Reference 1 Resistor Select Bit : 0 */ +#define CEREF11_H (0x0002) /* Comp. E Reference 1 Resistor Select Bit : 1 */ +#define CEREF12_H (0x0004) /* Comp. E Reference 1 Resistor Select Bit : 2 */ +#define CEREF13_H (0x0008) /* Comp. E Reference 1 Resistor Select Bit : 3 */ +#define CEREF14_H (0x0010) /* Comp. E Reference 1 Resistor Select Bit : 4 */ +#define CEREFL0_H (0x0020) /* Comp. E Reference voltage level Bit : 0 */ +#define CEREFL1_H (0x0040) /* Comp. E Reference voltage level Bit : 1 */ +#define CEREFACC_H (0x0080) /* Comp. E Reference Accuracy */ + +#define CEREF0_0 (0x0000) /* Comp. E Int. Ref.0 Select 0 : 1/32 */ +#define CEREF0_1 (0x0001) /* Comp. E Int. Ref.0 Select 1 : 2/32 */ +#define CEREF0_2 (0x0002) /* Comp. E Int. Ref.0 Select 2 : 3/32 */ +#define CEREF0_3 (0x0003) /* Comp. E Int. Ref.0 Select 3 : 4/32 */ +#define CEREF0_4 (0x0004) /* Comp. E Int. Ref.0 Select 4 : 5/32 */ +#define CEREF0_5 (0x0005) /* Comp. E Int. Ref.0 Select 5 : 6/32 */ +#define CEREF0_6 (0x0006) /* Comp. E Int. Ref.0 Select 6 : 7/32 */ +#define CEREF0_7 (0x0007) /* Comp. E Int. Ref.0 Select 7 : 8/32 */ +#define CEREF0_8 (0x0008) /* Comp. E Int. Ref.0 Select 0 : 9/32 */ +#define CEREF0_9 (0x0009) /* Comp. E Int. Ref.0 Select 1 : 10/32 */ +#define CEREF0_10 (0x000A) /* Comp. E Int. Ref.0 Select 2 : 11/32 */ +#define CEREF0_11 (0x000B) /* Comp. E Int. Ref.0 Select 3 : 12/32 */ +#define CEREF0_12 (0x000C) /* Comp. E Int. Ref.0 Select 4 : 13/32 */ +#define CEREF0_13 (0x000D) /* Comp. E Int. Ref.0 Select 5 : 14/32 */ +#define CEREF0_14 (0x000E) /* Comp. E Int. Ref.0 Select 6 : 15/32 */ +#define CEREF0_15 (0x000F) /* Comp. E Int. Ref.0 Select 7 : 16/32 */ +#define CEREF0_16 (0x0010) /* Comp. E Int. Ref.0 Select 0 : 17/32 */ +#define CEREF0_17 (0x0011) /* Comp. E Int. Ref.0 Select 1 : 18/32 */ +#define CEREF0_18 (0x0012) /* Comp. E Int. Ref.0 Select 2 : 19/32 */ +#define CEREF0_19 (0x0013) /* Comp. E Int. Ref.0 Select 3 : 20/32 */ +#define CEREF0_20 (0x0014) /* Comp. E Int. Ref.0 Select 4 : 21/32 */ +#define CEREF0_21 (0x0015) /* Comp. E Int. Ref.0 Select 5 : 22/32 */ +#define CEREF0_22 (0x0016) /* Comp. E Int. Ref.0 Select 6 : 23/32 */ +#define CEREF0_23 (0x0017) /* Comp. E Int. Ref.0 Select 7 : 24/32 */ +#define CEREF0_24 (0x0018) /* Comp. E Int. Ref.0 Select 0 : 25/32 */ +#define CEREF0_25 (0x0019) /* Comp. E Int. Ref.0 Select 1 : 26/32 */ +#define CEREF0_26 (0x001A) /* Comp. E Int. Ref.0 Select 2 : 27/32 */ +#define CEREF0_27 (0x001B) /* Comp. E Int. Ref.0 Select 3 : 28/32 */ +#define CEREF0_28 (0x001C) /* Comp. E Int. Ref.0 Select 4 : 29/32 */ +#define CEREF0_29 (0x001D) /* Comp. E Int. Ref.0 Select 5 : 30/32 */ +#define CEREF0_30 (0x001E) /* Comp. E Int. Ref.0 Select 6 : 31/32 */ +#define CEREF0_31 (0x001F) /* Comp. E Int. Ref.0 Select 7 : 32/32 */ + +#define CERS_0 (0x0000) /* Comp. E Reference Source 0 : Off */ +#define CERS_1 (0x0040) /* Comp. E Reference Source 1 : Vcc */ +#define CERS_2 (0x0080) /* Comp. E Reference Source 2 : Shared Ref. */ +#define CERS_3 (0x00C0) /* Comp. E Reference Source 3 : Shared Ref. / Off */ + +#define CEREF1_0 (0x0000) /* Comp. E Int. Ref.1 Select 0 : 1/32 */ +#define CEREF1_1 (0x0100) /* Comp. E Int. Ref.1 Select 1 : 2/32 */ +#define CEREF1_2 (0x0200) /* Comp. E Int. Ref.1 Select 2 : 3/32 */ +#define CEREF1_3 (0x0300) /* Comp. E Int. Ref.1 Select 3 : 4/32 */ +#define CEREF1_4 (0x0400) /* Comp. E Int. Ref.1 Select 4 : 5/32 */ +#define CEREF1_5 (0x0500) /* Comp. E Int. Ref.1 Select 5 : 6/32 */ +#define CEREF1_6 (0x0600) /* Comp. E Int. Ref.1 Select 6 : 7/32 */ +#define CEREF1_7 (0x0700) /* Comp. E Int. Ref.1 Select 7 : 8/32 */ +#define CEREF1_8 (0x0800) /* Comp. E Int. Ref.1 Select 0 : 9/32 */ +#define CEREF1_9 (0x0900) /* Comp. E Int. Ref.1 Select 1 : 10/32 */ +#define CEREF1_10 (0x0A00) /* Comp. E Int. Ref.1 Select 2 : 11/32 */ +#define CEREF1_11 (0x0B00) /* Comp. E Int. Ref.1 Select 3 : 12/32 */ +#define CEREF1_12 (0x0C00) /* Comp. E Int. Ref.1 Select 4 : 13/32 */ +#define CEREF1_13 (0x0D00) /* Comp. E Int. Ref.1 Select 5 : 14/32 */ +#define CEREF1_14 (0x0E00) /* Comp. E Int. Ref.1 Select 6 : 15/32 */ +#define CEREF1_15 (0x0F00) /* Comp. E Int. Ref.1 Select 7 : 16/32 */ +#define CEREF1_16 (0x1000) /* Comp. E Int. Ref.1 Select 0 : 17/32 */ +#define CEREF1_17 (0x1100) /* Comp. E Int. Ref.1 Select 1 : 18/32 */ +#define CEREF1_18 (0x1200) /* Comp. E Int. Ref.1 Select 2 : 19/32 */ +#define CEREF1_19 (0x1300) /* Comp. E Int. Ref.1 Select 3 : 20/32 */ +#define CEREF1_20 (0x1400) /* Comp. E Int. Ref.1 Select 4 : 21/32 */ +#define CEREF1_21 (0x1500) /* Comp. E Int. Ref.1 Select 5 : 22/32 */ +#define CEREF1_22 (0x1600) /* Comp. E Int. Ref.1 Select 6 : 23/32 */ +#define CEREF1_23 (0x1700) /* Comp. E Int. Ref.1 Select 7 : 24/32 */ +#define CEREF1_24 (0x1800) /* Comp. E Int. Ref.1 Select 0 : 25/32 */ +#define CEREF1_25 (0x1900) /* Comp. E Int. Ref.1 Select 1 : 26/32 */ +#define CEREF1_26 (0x1A00) /* Comp. E Int. Ref.1 Select 2 : 27/32 */ +#define CEREF1_27 (0x1B00) /* Comp. E Int. Ref.1 Select 3 : 28/32 */ +#define CEREF1_28 (0x1C00) /* Comp. E Int. Ref.1 Select 4 : 29/32 */ +#define CEREF1_29 (0x1D00) /* Comp. E Int. Ref.1 Select 5 : 30/32 */ +#define CEREF1_30 (0x1E00) /* Comp. E Int. Ref.1 Select 6 : 31/32 */ +#define CEREF1_31 (0x1F00) /* Comp. E Int. Ref.1 Select 7 : 32/32 */ + +#define CEREFL_0 (0x0000) /* Comp. E Reference voltage level 0 : None */ +#define CEREFL_1 (0x2000) /* Comp. E Reference voltage level 1 : 1.2V */ +#define CEREFL_2 (0x4000) /* Comp. E Reference voltage level 2 : 2.0V */ +#define CEREFL_3 (0x6000) /* Comp. E Reference voltage level 3 : 2.5V */ + +#define CEPD0 (0x0001) /* Comp. E Disable Input Buffer of Port Register .0 */ +#define CEPD1 (0x0002) /* Comp. E Disable Input Buffer of Port Register .1 */ +#define CEPD2 (0x0004) /* Comp. E Disable Input Buffer of Port Register .2 */ +#define CEPD3 (0x0008) /* Comp. E Disable Input Buffer of Port Register .3 */ +#define CEPD4 (0x0010) /* Comp. E Disable Input Buffer of Port Register .4 */ +#define CEPD5 (0x0020) /* Comp. E Disable Input Buffer of Port Register .5 */ +#define CEPD6 (0x0040) /* Comp. E Disable Input Buffer of Port Register .6 */ +#define CEPD7 (0x0080) /* Comp. E Disable Input Buffer of Port Register .7 */ +#define CEPD8 (0x0100) /* Comp. E Disable Input Buffer of Port Register .8 */ +#define CEPD9 (0x0200) /* Comp. E Disable Input Buffer of Port Register .9 */ +#define CEPD10 (0x0400) /* Comp. E Disable Input Buffer of Port Register .10 */ +#define CEPD11 (0x0800) /* Comp. E Disable Input Buffer of Port Register .11 */ +#define CEPD12 (0x1000) /* Comp. E Disable Input Buffer of Port Register .12 */ +#define CEPD13 (0x2000) /* Comp. E Disable Input Buffer of Port Register .13 */ +#define CEPD14 (0x4000) /* Comp. E Disable Input Buffer of Port Register .14 */ +#define CEPD15 (0x8000) /* Comp. E Disable Input Buffer of Port Register .15 */ + +#define CEPD0_L (0x0001) /* Comp. E Disable Input Buffer of Port Register .0 */ +#define CEPD1_L (0x0002) /* Comp. E Disable Input Buffer of Port Register .1 */ +#define CEPD2_L (0x0004) /* Comp. E Disable Input Buffer of Port Register .2 */ +#define CEPD3_L (0x0008) /* Comp. E Disable Input Buffer of Port Register .3 */ +#define CEPD4_L (0x0010) /* Comp. E Disable Input Buffer of Port Register .4 */ +#define CEPD5_L (0x0020) /* Comp. E Disable Input Buffer of Port Register .5 */ +#define CEPD6_L (0x0040) /* Comp. E Disable Input Buffer of Port Register .6 */ +#define CEPD7_L (0x0080) /* Comp. E Disable Input Buffer of Port Register .7 */ + +#define CEPD8_H (0x0001) /* Comp. E Disable Input Buffer of Port Register .8 */ +#define CEPD9_H (0x0002) /* Comp. E Disable Input Buffer of Port Register .9 */ +#define CEPD10_H (0x0004) /* Comp. E Disable Input Buffer of Port Register .10 */ +#define CEPD11_H (0x0008) /* Comp. E Disable Input Buffer of Port Register .11 */ +#define CEPD12_H (0x0010) /* Comp. E Disable Input Buffer of Port Register .12 */ +#define CEPD13_H (0x0020) /* Comp. E Disable Input Buffer of Port Register .13 */ +#define CEPD14_H (0x0040) /* Comp. E Disable Input Buffer of Port Register .14 */ +#define CEPD15_H (0x0080) /* Comp. E Disable Input Buffer of Port Register .15 */ + +/* CEINT Control Bits */ +#define CEIFG (0x0001) /* Comp. E Interrupt Flag */ +#define CEIIFG (0x0002) /* Comp. E Interrupt Flag Inverted Polarity */ +//#define RESERVED (0x0004) /* Comp. E */ +//#define RESERVED (0x0008) /* Comp. E */ +#define CERDYIFG (0x0010) /* Comp. E Comparator_E ready interrupt flag */ +//#define RESERVED (0x0020) /* Comp. E */ +//#define RESERVED (0x0040) /* Comp. E */ +//#define RESERVED (0x0080) /* Comp. E */ +#define CEIE (0x0100) /* Comp. E Interrupt Enable */ +#define CEIIE (0x0200) /* Comp. E Interrupt Enable Inverted Polarity */ +//#define RESERVED (0x0400) /* Comp. E */ +//#define RESERVED (0x0800) /* Comp. E */ +#define CERDYIE (0x1000) /* Comp. E Comparator_E ready interrupt enable */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +//#define RESERVED (0x8000) /* Comp. E */ + +/* CEINT Control Bits */ +#define CEIFG_L (0x0001) /* Comp. E Interrupt Flag */ +#define CEIIFG_L (0x0002) /* Comp. E Interrupt Flag Inverted Polarity */ +//#define RESERVED (0x0004) /* Comp. E */ +//#define RESERVED (0x0008) /* Comp. E */ +#define CERDYIFG_L (0x0010) /* Comp. E Comparator_E ready interrupt flag */ +//#define RESERVED (0x0020) /* Comp. E */ +//#define RESERVED (0x0040) /* Comp. E */ +//#define RESERVED (0x0080) /* Comp. E */ +//#define RESERVED (0x0400) /* Comp. E */ +//#define RESERVED (0x0800) /* Comp. E */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +//#define RESERVED (0x8000) /* Comp. E */ + +/* CEINT Control Bits */ +//#define RESERVED (0x0004) /* Comp. E */ +//#define RESERVED (0x0008) /* Comp. E */ +//#define RESERVED (0x0020) /* Comp. E */ +//#define RESERVED (0x0040) /* Comp. E */ +//#define RESERVED (0x0080) /* Comp. E */ +#define CEIE_H (0x0001) /* Comp. E Interrupt Enable */ +#define CEIIE_H (0x0002) /* Comp. E Interrupt Enable Inverted Polarity */ +//#define RESERVED (0x0400) /* Comp. E */ +//#define RESERVED (0x0800) /* Comp. E */ +#define CERDYIE_H (0x0010) /* Comp. E Comparator_E ready interrupt enable */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +//#define RESERVED (0x8000) /* Comp. E */ + +/* CEIV Definitions */ +#define CEIV_NONE (0x0000) /* No Interrupt pending */ +#define CEIV_CEIFG (0x0002) /* CEIFG */ +#define CEIV_CEIIFG (0x0004) /* CEIIFG */ +#define CEIV_CERDYIFG (0x000A) /* CERDYIFG */ + +/************************************************************* +* CRC Module +*************************************************************/ +#define __MSP430_HAS_CRC__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_CRC__ 0x0150 +#define CRC_BASE __MSP430_BASEADDRESS_CRC__ + +sfr_w(CRCDI); /* CRC Data In Register */ +sfr_b(CRCDI_L); /* CRC Data In Register */ +sfr_b(CRCDI_H); /* CRC Data In Register */ +sfr_w(CRCDIRB); /* CRC data in reverse byte Register */ +sfr_b(CRCDIRB_L); /* CRC data in reverse byte Register */ +sfr_b(CRCDIRB_H); /* CRC data in reverse byte Register */ +sfr_w(CRCINIRES); /* CRC Initialisation Register and Result Register */ +sfr_b(CRCINIRES_L); /* CRC Initialisation Register and Result Register */ +sfr_b(CRCINIRES_H); /* CRC Initialisation Register and Result Register */ +sfr_w(CRCRESR); /* CRC reverse result Register */ +sfr_b(CRCRESR_L); /* CRC reverse result Register */ +sfr_b(CRCRESR_H); /* CRC reverse result Register */ + +/************************************************************ +* CLOCK SYSTEM +************************************************************/ +#define __MSP430_HAS_CS__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_CS__ 0x0160 +#define CS_BASE __MSP430_BASEADDRESS_CS__ + +sfr_w(CSCTL0); /* CS Control Register 0 */ +sfr_b(CSCTL0_L); /* CS Control Register 0 */ +sfr_b(CSCTL0_H); /* CS Control Register 0 */ +sfr_w(CSCTL1); /* CS Control Register 1 */ +sfr_b(CSCTL1_L); /* CS Control Register 1 */ +sfr_b(CSCTL1_H); /* CS Control Register 1 */ +sfr_w(CSCTL2); /* CS Control Register 2 */ +sfr_b(CSCTL2_L); /* CS Control Register 2 */ +sfr_b(CSCTL2_H); /* CS Control Register 2 */ +sfr_w(CSCTL3); /* CS Control Register 3 */ +sfr_b(CSCTL3_L); /* CS Control Register 3 */ +sfr_b(CSCTL3_H); /* CS Control Register 3 */ +sfr_w(CSCTL4); /* CS Control Register 4 */ +sfr_b(CSCTL4_L); /* CS Control Register 4 */ +sfr_b(CSCTL4_H); /* CS Control Register 4 */ +sfr_w(CSCTL5); /* CS Control Register 5 */ +sfr_b(CSCTL5_L); /* CS Control Register 5 */ +sfr_b(CSCTL5_H); /* CS Control Register 5 */ +sfr_w(CSCTL6); /* CS Control Register 6 */ +sfr_b(CSCTL6_L); /* CS Control Register 6 */ +sfr_b(CSCTL6_H); /* CS Control Register 6 */ + +/* CSCTL0 Control Bits */ + +#define CSKEY (0xA500) /* CS Password */ +#define CSKEY_H (0xA5) /* CS Password for high byte access */ + +/* CSCTL1 Control Bits */ +#define DCOFSEL0 (0x0002) /* DCO frequency select Bit: 0 */ +#define DCOFSEL1 (0x0004) /* DCO frequency select Bit: 1 */ +#define DCOFSEL2 (0x0008) /* DCO frequency select Bit: 2 */ +#define DCORSEL (0x0040) /* DCO range select. */ + +/* CSCTL1 Control Bits */ +#define DCOFSEL0_L (0x0002) /* DCO frequency select Bit: 0 */ +#define DCOFSEL1_L (0x0004) /* DCO frequency select Bit: 1 */ +#define DCOFSEL2_L (0x0008) /* DCO frequency select Bit: 2 */ +#define DCORSEL_L (0x0040) /* DCO range select. */ + +#define DCOFSEL_0 (0x0000) /* DCO frequency select: 0 */ +#define DCOFSEL_1 (0x0002) /* DCO frequency select: 1 */ +#define DCOFSEL_2 (0x0004) /* DCO frequency select: 2 */ +#define DCOFSEL_3 (0x0006) /* DCO frequency select: 3 */ +#define DCOFSEL_4 (0x0008) /* DCO frequency select: 4 */ +#define DCOFSEL_5 (0x000A) /* DCO frequency select: 5 */ +#define DCOFSEL_6 (0x000C) /* DCO frequency select: 6 */ +#define DCOFSEL_7 (0x000E) /* DCO frequency select: 7 */ + +/* CSCTL2 Control Bits */ +#define SELM0 (0x0001) /* MCLK Source Select Bit: 0 */ +#define SELM1 (0x0002) /* MCLK Source Select Bit: 1 */ +#define SELM2 (0x0004) /* MCLK Source Select Bit: 2 */ +//#define RESERVED (0x0004) /* RESERVED */ +//#define RESERVED (0x0008) /* RESERVED */ +#define SELS0 (0x0010) /* SMCLK Source Select Bit: 0 */ +#define SELS1 (0x0020) /* SMCLK Source Select Bit: 1 */ +#define SELS2 (0x0040) /* SMCLK Source Select Bit: 2 */ +//#define RESERVED (0x0040) /* RESERVED */ +//#define RESERVED (0x0080) /* RESERVED */ +#define SELA0 (0x0100) /* ACLK Source Select Bit: 0 */ +#define SELA1 (0x0200) /* ACLK Source Select Bit: 1 */ +#define SELA2 (0x0400) /* ACLK Source Select Bit: 2 */ +//#define RESERVED (0x0400) /* RESERVED */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x1000) /* RESERVED */ +//#define RESERVED (0x2000) /* RESERVED */ +//#define RESERVED (0x4000) /* RESERVED */ +//#define RESERVED (0x8000) /* RESERVED */ + +/* CSCTL2 Control Bits */ +#define SELM0_L (0x0001) /* MCLK Source Select Bit: 0 */ +#define SELM1_L (0x0002) /* MCLK Source Select Bit: 1 */ +#define SELM2_L (0x0004) /* MCLK Source Select Bit: 2 */ +//#define RESERVED (0x0004) /* RESERVED */ +//#define RESERVED (0x0008) /* RESERVED */ +#define SELS0_L (0x0010) /* SMCLK Source Select Bit: 0 */ +#define SELS1_L (0x0020) /* SMCLK Source Select Bit: 1 */ +#define SELS2_L (0x0040) /* SMCLK Source Select Bit: 2 */ +//#define RESERVED (0x0040) /* RESERVED */ +//#define RESERVED (0x0080) /* RESERVED */ +//#define RESERVED (0x0400) /* RESERVED */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x1000) /* RESERVED */ +//#define RESERVED (0x2000) /* RESERVED */ +//#define RESERVED (0x4000) /* RESERVED */ +//#define RESERVED (0x8000) /* RESERVED */ + +/* CSCTL2 Control Bits */ +//#define RESERVED (0x0004) /* RESERVED */ +//#define RESERVED (0x0008) /* RESERVED */ +//#define RESERVED (0x0040) /* RESERVED */ +//#define RESERVED (0x0080) /* RESERVED */ +#define SELA0_H (0x0001) /* ACLK Source Select Bit: 0 */ +#define SELA1_H (0x0002) /* ACLK Source Select Bit: 1 */ +#define SELA2_H (0x0004) /* ACLK Source Select Bit: 2 */ +//#define RESERVED (0x0400) /* RESERVED */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x1000) /* RESERVED */ +//#define RESERVED (0x2000) /* RESERVED */ +//#define RESERVED (0x4000) /* RESERVED */ +//#define RESERVED (0x8000) /* RESERVED */ + +#define SELM_0 (0x0000) /* MCLK Source Select 0 */ +#define SELM_1 (0x0001) /* MCLK Source Select 1 */ +#define SELM_2 (0x0002) /* MCLK Source Select 2 */ +#define SELM_3 (0x0003) /* MCLK Source Select 3 */ +#define SELM_4 (0x0004) /* MCLK Source Select 4 */ +#define SELM_5 (0x0005) /* MCLK Source Select 5 */ +#define SELM_6 (0x0006) /* MCLK Source Select 6 */ +#define SELM_7 (0x0007) /* MCLK Source Select 7 */ +#define SELM__LFXTCLK (0x0000) /* MCLK Source Select LFXTCLK */ +#define SELM__VLOCLK (0x0001) /* MCLK Source Select VLOCLK */ +#define SELM__LFMODCLK (0x0002) /* MCLK Source Select LFMODOSC */ +#define SELM__LFMODOSC (0x0002) /* MCLK Source Select LFMODOSC (legacy) */ +#define SELM__DCOCLK (0x0003) /* MCLK Source Select DCOCLK */ +#define SELM__MODCLK (0x0004) /* MCLK Source Select MODOSC */ +#define SELM__MODOSC (0x0004) /* MCLK Source Select MODOSC (legacy) */ +#define SELM__HFXTCLK (0x0005) /* MCLK Source Select HFXTCLK */ + +#define SELS_0 (0x0000) /* SMCLK Source Select 0 */ +#define SELS_1 (0x0010) /* SMCLK Source Select 1 */ +#define SELS_2 (0x0020) /* SMCLK Source Select 2 */ +#define SELS_3 (0x0030) /* SMCLK Source Select 3 */ +#define SELS_4 (0x0040) /* SMCLK Source Select 4 */ +#define SELS_5 (0x0050) /* SMCLK Source Select 5 */ +#define SELS_6 (0x0060) /* SMCLK Source Select 6 */ +#define SELS_7 (0x0070) /* SMCLK Source Select 7 */ +#define SELS__LFXTCLK (0x0000) /* SMCLK Source Select LFXTCLK */ +#define SELS__VLOCLK (0x0010) /* SMCLK Source Select VLOCLK */ +#define SELS__LFMODCLK (0x0020) /* SMCLK Source Select LFMODOSC */ +#define SELS__LFMODOSC (0x0020) /* SMCLK Source Select LFMODOSC (legacy) */ +#define SELS__DCOCLK (0x0030) /* SMCLK Source Select DCOCLK */ +#define SELS__MODCLK (0x0040) /* SMCLK Source Select MODOSC */ +#define SELS__MODOSC (0x0040) /* SMCLK Source Select MODOSC (legacy) */ +#define SELS__HFXTCLK (0x0050) /* SMCLK Source Select HFXTCLK */ + +#define SELA_0 (0x0000) /* ACLK Source Select 0 */ +#define SELA_1 (0x0100) /* ACLK Source Select 1 */ +#define SELA_2 (0x0200) /* ACLK Source Select 2 */ +#define SELA_3 (0x0300) /* ACLK Source Select 3 */ +#define SELA_4 (0x0400) /* ACLK Source Select 4 */ +#define SELA_5 (0x0500) /* ACLK Source Select 5 */ +#define SELA_6 (0x0600) /* ACLK Source Select 6 */ +#define SELA_7 (0x0700) /* ACLK Source Select 7 */ +#define SELA__LFXTCLK (0x0000) /* ACLK Source Select LFXTCLK */ +#define SELA__VLOCLK (0x0100) /* ACLK Source Select VLOCLK */ +#define SELA__LFMODCLK (0x0200) /* ACLK Source Select LFMODOSC */ +#define SELA__LFMODOSC (0x0200) /* ACLK Source Select LFMODOSC (legacy) */ + +/* CSCTL3 Control Bits */ +#define DIVM0 (0x0001) /* MCLK Divider Bit: 0 */ +#define DIVM1 (0x0002) /* MCLK Divider Bit: 1 */ +#define DIVM2 (0x0004) /* MCLK Divider Bit: 2 */ +//#define RESERVED (0x0004) /* RESERVED */ +//#define RESERVED (0x0008) /* RESERVED */ +#define DIVS0 (0x0010) /* SMCLK Divider Bit: 0 */ +#define DIVS1 (0x0020) /* SMCLK Divider Bit: 1 */ +#define DIVS2 (0x0040) /* SMCLK Divider Bit: 2 */ +//#define RESERVED (0x0040) /* RESERVED */ +//#define RESERVED (0x0080) /* RESERVED */ +#define DIVA0 (0x0100) /* ACLK Divider Bit: 0 */ +#define DIVA1 (0x0200) /* ACLK Divider Bit: 1 */ +#define DIVA2 (0x0400) /* ACLK Divider Bit: 2 */ +//#define RESERVED (0x0400) /* RESERVED */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x1000) /* RESERVED */ +//#define RESERVED (0x2000) /* RESERVED */ +//#define RESERVED (0x4000) /* RESERVED */ +//#define RESERVED (0x8000) /* RESERVED */ + +/* CSCTL3 Control Bits */ +#define DIVM0_L (0x0001) /* MCLK Divider Bit: 0 */ +#define DIVM1_L (0x0002) /* MCLK Divider Bit: 1 */ +#define DIVM2_L (0x0004) /* MCLK Divider Bit: 2 */ +//#define RESERVED (0x0004) /* RESERVED */ +//#define RESERVED (0x0008) /* RESERVED */ +#define DIVS0_L (0x0010) /* SMCLK Divider Bit: 0 */ +#define DIVS1_L (0x0020) /* SMCLK Divider Bit: 1 */ +#define DIVS2_L (0x0040) /* SMCLK Divider Bit: 2 */ +//#define RESERVED (0x0040) /* RESERVED */ +//#define RESERVED (0x0080) /* RESERVED */ +//#define RESERVED (0x0400) /* RESERVED */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x1000) /* RESERVED */ +//#define RESERVED (0x2000) /* RESERVED */ +//#define RESERVED (0x4000) /* RESERVED */ +//#define RESERVED (0x8000) /* RESERVED */ + +/* CSCTL3 Control Bits */ +//#define RESERVED (0x0004) /* RESERVED */ +//#define RESERVED (0x0008) /* RESERVED */ +//#define RESERVED (0x0040) /* RESERVED */ +//#define RESERVED (0x0080) /* RESERVED */ +#define DIVA0_H (0x0001) /* ACLK Divider Bit: 0 */ +#define DIVA1_H (0x0002) /* ACLK Divider Bit: 1 */ +#define DIVA2_H (0x0004) /* ACLK Divider Bit: 2 */ +//#define RESERVED (0x0400) /* RESERVED */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x1000) /* RESERVED */ +//#define RESERVED (0x2000) /* RESERVED */ +//#define RESERVED (0x4000) /* RESERVED */ +//#define RESERVED (0x8000) /* RESERVED */ + +#define DIVM_0 (0x0000) /* MCLK Source Divider 0 */ +#define DIVM_1 (0x0001) /* MCLK Source Divider 1 */ +#define DIVM_2 (0x0002) /* MCLK Source Divider 2 */ +#define DIVM_3 (0x0003) /* MCLK Source Divider 3 */ +#define DIVM_4 (0x0004) /* MCLK Source Divider 4 */ +#define DIVM_5 (0x0005) /* MCLK Source Divider 5 */ +#define DIVM__1 (0x0000) /* MCLK Source Divider f(MCLK)/1 */ +#define DIVM__2 (0x0001) /* MCLK Source Divider f(MCLK)/2 */ +#define DIVM__4 (0x0002) /* MCLK Source Divider f(MCLK)/4 */ +#define DIVM__8 (0x0003) /* MCLK Source Divider f(MCLK)/8 */ +#define DIVM__16 (0x0004) /* MCLK Source Divider f(MCLK)/16 */ +#define DIVM__32 (0x0005) /* MCLK Source Divider f(MCLK)/32 */ + +#define DIVS_0 (0x0000) /* SMCLK Source Divider 0 */ +#define DIVS_1 (0x0010) /* SMCLK Source Divider 1 */ +#define DIVS_2 (0x0020) /* SMCLK Source Divider 2 */ +#define DIVS_3 (0x0030) /* SMCLK Source Divider 3 */ +#define DIVS_4 (0x0040) /* SMCLK Source Divider 4 */ +#define DIVS_5 (0x0050) /* SMCLK Source Divider 5 */ +#define DIVS__1 (0x0000) /* SMCLK Source Divider f(SMCLK)/1 */ +#define DIVS__2 (0x0010) /* SMCLK Source Divider f(SMCLK)/2 */ +#define DIVS__4 (0x0020) /* SMCLK Source Divider f(SMCLK)/4 */ +#define DIVS__8 (0x0030) /* SMCLK Source Divider f(SMCLK)/8 */ +#define DIVS__16 (0x0040) /* SMCLK Source Divider f(SMCLK)/16 */ +#define DIVS__32 (0x0050) /* SMCLK Source Divider f(SMCLK)/32 */ + +#define DIVA_0 (0x0000) /* ACLK Source Divider 0 */ +#define DIVA_1 (0x0100) /* ACLK Source Divider 1 */ +#define DIVA_2 (0x0200) /* ACLK Source Divider 2 */ +#define DIVA_3 (0x0300) /* ACLK Source Divider 3 */ +#define DIVA_4 (0x0400) /* ACLK Source Divider 4 */ +#define DIVA_5 (0x0500) /* ACLK Source Divider 5 */ +#define DIVA__1 (0x0000) /* ACLK Source Divider f(ACLK)/1 */ +#define DIVA__2 (0x0100) /* ACLK Source Divider f(ACLK)/2 */ +#define DIVA__4 (0x0200) /* ACLK Source Divider f(ACLK)/4 */ +#define DIVA__8 (0x0300) /* ACLK Source Divider f(ACLK)/8 */ +#define DIVA__16 (0x0400) /* ACLK Source Divider f(ACLK)/16 */ +#define DIVA__32 (0x0500) /* ACLK Source Divider f(ACLK)/32 */ + +/* CSCTL4 Control Bits */ +#define LFXTOFF (0x0001) /* Low Frequency Oscillator (LFXT) disable */ +#define SMCLKOFF (0x0002) /* SMCLK Off */ +#define VLOOFF (0x0008) /* VLO Off */ +#define LFXTBYPASS (0x0010) /* LFXT bypass mode : 0: internal 1:sourced from external pin */ +#define LFXTDRIVE0 (0x0040) /* LFXT Drive Level mode Bit 0 */ +#define LFXTDRIVE1 (0x0080) /* LFXT Drive Level mode Bit 1 */ +#define HFXTOFF (0x0100) /* High Frequency Oscillator disable */ +#define HFFREQ0 (0x0400) /* HFXT frequency selection Bit 1 */ +#define HFFREQ1 (0x0800) /* HFXT frequency selection Bit 0 */ +#define HFXTBYPASS (0x1000) /* HFXT bypass mode : 0: internal 1:sourced from external pin */ +#define HFXTDRIVE0 (0x4000) /* HFXT Drive Level mode Bit 0 */ +#define HFXTDRIVE1 (0x8000) /* HFXT Drive Level mode Bit 1 */ + +/* CSCTL4 Control Bits */ +#define LFXTOFF_L (0x0001) /* Low Frequency Oscillator (LFXT) disable */ +#define SMCLKOFF_L (0x0002) /* SMCLK Off */ +#define VLOOFF_L (0x0008) /* VLO Off */ +#define LFXTBYPASS_L (0x0010) /* LFXT bypass mode : 0: internal 1:sourced from external pin */ +#define LFXTDRIVE0_L (0x0040) /* LFXT Drive Level mode Bit 0 */ +#define LFXTDRIVE1_L (0x0080) /* LFXT Drive Level mode Bit 1 */ + +/* CSCTL4 Control Bits */ +#define HFXTOFF_H (0x0001) /* High Frequency Oscillator disable */ +#define HFFREQ0_H (0x0004) /* HFXT frequency selection Bit 1 */ +#define HFFREQ1_H (0x0008) /* HFXT frequency selection Bit 0 */ +#define HFXTBYPASS_H (0x0010) /* HFXT bypass mode : 0: internal 1:sourced from external pin */ +#define HFXTDRIVE0_H (0x0040) /* HFXT Drive Level mode Bit 0 */ +#define HFXTDRIVE1_H (0x0080) /* HFXT Drive Level mode Bit 1 */ + +#define LFXTDRIVE_0 (0x0000) /* LFXT Drive Level mode: 0 */ +#define LFXTDRIVE_1 (0x0040) /* LFXT Drive Level mode: 1 */ +#define LFXTDRIVE_2 (0x0080) /* LFXT Drive Level mode: 2 */ +#define LFXTDRIVE_3 (0x00C0) /* LFXT Drive Level mode: 3 */ + +#define HFFREQ_0 (0x0000) /* HFXT frequency selection: 0 */ +#define HFFREQ_1 (0x0400) /* HFXT frequency selection: 1 */ +#define HFFREQ_2 (0x0800) /* HFXT frequency selection: 2 */ +#define HFFREQ_3 (0x0C00) /* HFXT frequency selection: 3 */ + +#define HFXTDRIVE_0 (0x0000) /* HFXT Drive Level mode: 0 */ +#define HFXTDRIVE_1 (0x4000) /* HFXT Drive Level mode: 1 */ +#define HFXTDRIVE_2 (0x8000) /* HFXT Drive Level mode: 2 */ +#define HFXTDRIVE_3 (0xC000) /* HFXT Drive Level mode: 3 */ + +/* CSCTL5 Control Bits */ +#define LFXTOFFG (0x0001) /* LFXT Low Frequency Oscillator Fault Flag */ +#define HFXTOFFG (0x0002) /* HFXT High Frequency Oscillator Fault Flag */ +#define ENSTFCNT1 (0x0040) /* Enable start counter for XT1 */ +#define ENSTFCNT2 (0x0080) /* Enable start counter for XT2 */ + +/* CSCTL5 Control Bits */ +#define LFXTOFFG_L (0x0001) /* LFXT Low Frequency Oscillator Fault Flag */ +#define HFXTOFFG_L (0x0002) /* HFXT High Frequency Oscillator Fault Flag */ +#define ENSTFCNT1_L (0x0040) /* Enable start counter for XT1 */ +#define ENSTFCNT2_L (0x0080) /* Enable start counter for XT2 */ + +/* CSCTL6 Control Bits */ +#define ACLKREQEN (0x0001) /* ACLK Clock Request Enable */ +#define MCLKREQEN (0x0002) /* MCLK Clock Request Enable */ +#define SMCLKREQEN (0x0004) /* SMCLK Clock Request Enable */ +#define MODCLKREQEN (0x0008) /* MODOSC Clock Request Enable */ + +/* CSCTL6 Control Bits */ +#define ACLKREQEN_L (0x0001) /* ACLK Clock Request Enable */ +#define MCLKREQEN_L (0x0002) /* MCLK Clock Request Enable */ +#define SMCLKREQEN_L (0x0004) /* SMCLK Clock Request Enable */ +#define MODCLKREQEN_L (0x0008) /* MODOSC Clock Request Enable */ + +/************************************************************ +* DMA_X +************************************************************/ +#define __MSP430_HAS_DMAX_3__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_DMAX_3__ 0x0500 +#define DMA_BASE __MSP430_BASEADDRESS_DMAX_3__ + +sfr_w(DMACTL0); /* DMA Module Control 0 */ +sfr_b(DMACTL0_L); /* DMA Module Control 0 */ +sfr_b(DMACTL0_H); /* DMA Module Control 0 */ +sfr_w(DMACTL1); /* DMA Module Control 1 */ +sfr_b(DMACTL1_L); /* DMA Module Control 1 */ +sfr_b(DMACTL1_H); /* DMA Module Control 1 */ +sfr_w(DMACTL2); /* DMA Module Control 2 */ +sfr_b(DMACTL2_L); /* DMA Module Control 2 */ +sfr_b(DMACTL2_H); /* DMA Module Control 2 */ +sfr_w(DMACTL3); /* DMA Module Control 3 */ +sfr_b(DMACTL3_L); /* DMA Module Control 3 */ +sfr_b(DMACTL3_H); /* DMA Module Control 3 */ +sfr_w(DMACTL4); /* DMA Module Control 4 */ +sfr_b(DMACTL4_L); /* DMA Module Control 4 */ +sfr_b(DMACTL4_H); /* DMA Module Control 4 */ +sfr_w(DMAIV); /* DMA Interrupt Vector Word */ +sfr_b(DMAIV_L); /* DMA Interrupt Vector Word */ +sfr_b(DMAIV_H); /* DMA Interrupt Vector Word */ + +sfr_w(DMA0CTL); /* DMA Channel 0 Control */ +sfr_b(DMA0CTL_L); /* DMA Channel 0 Control */ +sfr_b(DMA0CTL_H); /* DMA Channel 0 Control */ +sfr_l(DMA0SA); /* DMA Channel 0 Source Address */ +sfr_w(DMA0SAL); /* DMA Channel 0 Source Address */ +sfr_w(DMA0SAH); /* DMA Channel 0 Source Address */ +sfr_l(DMA0DA); /* DMA Channel 0 Destination Address */ +sfr_w(DMA0DAL); /* DMA Channel 0 Destination Address */ +sfr_w(DMA0DAH); /* DMA Channel 0 Destination Address */ +sfr_w(DMA0SZ); /* DMA Channel 0 Transfer Size */ + +sfr_w(DMA1CTL); /* DMA Channel 1 Control */ +sfr_b(DMA1CTL_L); /* DMA Channel 1 Control */ +sfr_b(DMA1CTL_H); /* DMA Channel 1 Control */ +sfr_l(DMA1SA); /* DMA Channel 1 Source Address */ +sfr_w(DMA1SAL); /* DMA Channel 1 Source Address */ +sfr_w(DMA1SAH); /* DMA Channel 1 Source Address */ +sfr_l(DMA1DA); /* DMA Channel 1 Destination Address */ +sfr_w(DMA1DAL); /* DMA Channel 1 Destination Address */ +sfr_w(DMA1DAH); /* DMA Channel 1 Destination Address */ +sfr_w(DMA1SZ); /* DMA Channel 1 Transfer Size */ + +sfr_w(DMA2CTL); /* DMA Channel 2 Control */ +sfr_b(DMA2CTL_L); /* DMA Channel 2 Control */ +sfr_b(DMA2CTL_H); /* DMA Channel 2 Control */ +sfr_l(DMA2SA); /* DMA Channel 2 Source Address */ +sfr_w(DMA2SAL); /* DMA Channel 2 Source Address */ +sfr_w(DMA2SAH); /* DMA Channel 2 Source Address */ +sfr_l(DMA2DA); /* DMA Channel 2 Destination Address */ +sfr_w(DMA2DAL); /* DMA Channel 2 Destination Address */ +sfr_w(DMA2DAH); /* DMA Channel 2 Destination Address */ +sfr_w(DMA2SZ); /* DMA Channel 2 Transfer Size */ + +/* DMACTL0 Control Bits */ +#define DMA0TSEL0 (0x0001) /* DMA channel 0 transfer select bit 0 */ +#define DMA0TSEL1 (0x0002) /* DMA channel 0 transfer select bit 1 */ +#define DMA0TSEL2 (0x0004) /* DMA channel 0 transfer select bit 2 */ +#define DMA0TSEL3 (0x0008) /* DMA channel 0 transfer select bit 3 */ +#define DMA0TSEL4 (0x0010) /* DMA channel 0 transfer select bit 4 */ +#define DMA1TSEL0 (0x0100) /* DMA channel 1 transfer select bit 0 */ +#define DMA1TSEL1 (0x0200) /* DMA channel 1 transfer select bit 1 */ +#define DMA1TSEL2 (0x0400) /* DMA channel 1 transfer select bit 2 */ +#define DMA1TSEL3 (0x0800) /* DMA channel 1 transfer select bit 3 */ +#define DMA1TSEL4 (0x1000) /* DMA channel 1 transfer select bit 4 */ + +/* DMACTL0 Control Bits */ +#define DMA0TSEL0_L (0x0001) /* DMA channel 0 transfer select bit 0 */ +#define DMA0TSEL1_L (0x0002) /* DMA channel 0 transfer select bit 1 */ +#define DMA0TSEL2_L (0x0004) /* DMA channel 0 transfer select bit 2 */ +#define DMA0TSEL3_L (0x0008) /* DMA channel 0 transfer select bit 3 */ +#define DMA0TSEL4_L (0x0010) /* DMA channel 0 transfer select bit 4 */ + +/* DMACTL0 Control Bits */ +#define DMA1TSEL0_H (0x0001) /* DMA channel 1 transfer select bit 0 */ +#define DMA1TSEL1_H (0x0002) /* DMA channel 1 transfer select bit 1 */ +#define DMA1TSEL2_H (0x0004) /* DMA channel 1 transfer select bit 2 */ +#define DMA1TSEL3_H (0x0008) /* DMA channel 1 transfer select bit 3 */ +#define DMA1TSEL4_H (0x0010) /* DMA channel 1 transfer select bit 4 */ + +/* DMACTL01 Control Bits */ +#define DMA2TSEL0 (0x0001) /* DMA channel 2 transfer select bit 0 */ +#define DMA2TSEL1 (0x0002) /* DMA channel 2 transfer select bit 1 */ +#define DMA2TSEL2 (0x0004) /* DMA channel 2 transfer select bit 2 */ +#define DMA2TSEL3 (0x0008) /* DMA channel 2 transfer select bit 3 */ +#define DMA2TSEL4 (0x0010) /* DMA channel 2 transfer select bit 4 */ + +/* DMACTL01 Control Bits */ +#define DMA2TSEL0_L (0x0001) /* DMA channel 2 transfer select bit 0 */ +#define DMA2TSEL1_L (0x0002) /* DMA channel 2 transfer select bit 1 */ +#define DMA2TSEL2_L (0x0004) /* DMA channel 2 transfer select bit 2 */ +#define DMA2TSEL3_L (0x0008) /* DMA channel 2 transfer select bit 3 */ +#define DMA2TSEL4_L (0x0010) /* DMA channel 2 transfer select bit 4 */ + +/* DMACTL4 Control Bits */ +#define ENNMI (0x0001) /* Enable NMI interruption of DMA */ +#define ROUNDROBIN (0x0002) /* Round-Robin DMA channel priorities */ +#define DMARMWDIS (0x0004) /* Inhibited DMA transfers during read-modify-write CPU operations */ + +/* DMACTL4 Control Bits */ +#define ENNMI_L (0x0001) /* Enable NMI interruption of DMA */ +#define ROUNDROBIN_L (0x0002) /* Round-Robin DMA channel priorities */ +#define DMARMWDIS_L (0x0004) /* Inhibited DMA transfers during read-modify-write CPU operations */ + +/* DMAxCTL Control Bits */ +#define DMAREQ (0x0001) /* Initiate DMA transfer with DMATSEL */ +#define DMAABORT (0x0002) /* DMA transfer aborted by NMI */ +#define DMAIE (0x0004) /* DMA interrupt enable */ +#define DMAIFG (0x0008) /* DMA interrupt flag */ +#define DMAEN (0x0010) /* DMA enable */ +#define DMALEVEL (0x0020) /* DMA level sensitive trigger select */ +#define DMASRCBYTE (0x0040) /* DMA source byte */ +#define DMADSTBYTE (0x0080) /* DMA destination byte */ +#define DMASRCINCR0 (0x0100) /* DMA source increment bit 0 */ +#define DMASRCINCR1 (0x0200) /* DMA source increment bit 1 */ +#define DMADSTINCR0 (0x0400) /* DMA destination increment bit 0 */ +#define DMADSTINCR1 (0x0800) /* DMA destination increment bit 1 */ +#define DMADT0 (0x1000) /* DMA transfer mode bit 0 */ +#define DMADT1 (0x2000) /* DMA transfer mode bit 1 */ +#define DMADT2 (0x4000) /* DMA transfer mode bit 2 */ + +/* DMAxCTL Control Bits */ +#define DMAREQ_L (0x0001) /* Initiate DMA transfer with DMATSEL */ +#define DMAABORT_L (0x0002) /* DMA transfer aborted by NMI */ +#define DMAIE_L (0x0004) /* DMA interrupt enable */ +#define DMAIFG_L (0x0008) /* DMA interrupt flag */ +#define DMAEN_L (0x0010) /* DMA enable */ +#define DMALEVEL_L (0x0020) /* DMA level sensitive trigger select */ +#define DMASRCBYTE_L (0x0040) /* DMA source byte */ +#define DMADSTBYTE_L (0x0080) /* DMA destination byte */ + +/* DMAxCTL Control Bits */ +#define DMASRCINCR0_H (0x0001) /* DMA source increment bit 0 */ +#define DMASRCINCR1_H (0x0002) /* DMA source increment bit 1 */ +#define DMADSTINCR0_H (0x0004) /* DMA destination increment bit 0 */ +#define DMADSTINCR1_H (0x0008) /* DMA destination increment bit 1 */ +#define DMADT0_H (0x0010) /* DMA transfer mode bit 0 */ +#define DMADT1_H (0x0020) /* DMA transfer mode bit 1 */ +#define DMADT2_H (0x0040) /* DMA transfer mode bit 2 */ + +#define DMASWDW (0x0000) /* DMA transfer: source word to destination word */ +#define DMASBDW (0x0040) /* DMA transfer: source byte to destination word */ +#define DMASWDB (0x0080) /* DMA transfer: source word to destination byte */ +#define DMASBDB (0x00C0) /* DMA transfer: source byte to destination byte */ + +#define DMASRCINCR_0 (0x0000) /* DMA source increment 0: source address unchanged */ +#define DMASRCINCR_1 (0x0100) /* DMA source increment 1: source address unchanged */ +#define DMASRCINCR_2 (0x0200) /* DMA source increment 2: source address decremented */ +#define DMASRCINCR_3 (0x0300) /* DMA source increment 3: source address incremented */ + +#define DMADSTINCR_0 (0x0000) /* DMA destination increment 0: destination address unchanged */ +#define DMADSTINCR_1 (0x0400) /* DMA destination increment 1: destination address unchanged */ +#define DMADSTINCR_2 (0x0800) /* DMA destination increment 2: destination address decremented */ +#define DMADSTINCR_3 (0x0C00) /* DMA destination increment 3: destination address incremented */ + +#define DMADT_0 (0x0000) /* DMA transfer mode 0: Single transfer */ +#define DMADT_1 (0x1000) /* DMA transfer mode 1: Block transfer */ +#define DMADT_2 (0x2000) /* DMA transfer mode 2: Burst-Block transfer */ +#define DMADT_3 (0x3000) /* DMA transfer mode 3: Burst-Block transfer */ +#define DMADT_4 (0x4000) /* DMA transfer mode 4: Repeated Single transfer */ +#define DMADT_5 (0x5000) /* DMA transfer mode 5: Repeated Block transfer */ +#define DMADT_6 (0x6000) /* DMA transfer mode 6: Repeated Burst-Block transfer */ +#define DMADT_7 (0x7000) /* DMA transfer mode 7: Repeated Burst-Block transfer */ + +/* DMAIV Definitions */ +#define DMAIV_NONE (0x0000) /* No Interrupt pending */ +#define DMAIV_DMA0IFG (0x0002) /* DMA0IFG*/ +#define DMAIV_DMA1IFG (0x0004) /* DMA1IFG*/ +#define DMAIV_DMA2IFG (0x0006) /* DMA2IFG*/ + +#define DMA0TSEL_0 (0x0000) /* DMA channel 0 transfer select 0: DMA_REQ (sw) */ +#define DMA0TSEL_1 (0x0001) /* DMA channel 0 transfer select 1: */ +#define DMA0TSEL_2 (0x0002) /* DMA channel 0 transfer select 2: */ +#define DMA0TSEL_3 (0x0003) /* DMA channel 0 transfer select 3: */ +#define DMA0TSEL_4 (0x0004) /* DMA channel 0 transfer select 4: */ +#define DMA0TSEL_5 (0x0005) /* DMA channel 0 transfer select 5: */ +#define DMA0TSEL_6 (0x0006) /* DMA channel 0 transfer select 6: */ +#define DMA0TSEL_7 (0x0007) /* DMA channel 0 transfer select 7: */ +#define DMA0TSEL_8 (0x0008) /* DMA channel 0 transfer select 8: */ +#define DMA0TSEL_9 (0x0009) /* DMA channel 0 transfer select 9: */ +#define DMA0TSEL_10 (0x000A) /* DMA channel 0 transfer select 10: */ +#define DMA0TSEL_11 (0x000B) /* DMA channel 0 transfer select 11: */ +#define DMA0TSEL_12 (0x000C) /* DMA channel 0 transfer select 12: */ +#define DMA0TSEL_13 (0x000D) /* DMA channel 0 transfer select 13: */ +#define DMA0TSEL_14 (0x000E) /* DMA channel 0 transfer select 14: */ +#define DMA0TSEL_15 (0x000F) /* DMA channel 0 transfer select 15: */ +#define DMA0TSEL_16 (0x0010) /* DMA channel 0 transfer select 16: */ +#define DMA0TSEL_17 (0x0011) /* DMA channel 0 transfer select 17: */ +#define DMA0TSEL_18 (0x0012) /* DMA channel 0 transfer select 18: */ +#define DMA0TSEL_19 (0x0013) /* DMA channel 0 transfer select 19: */ +#define DMA0TSEL_20 (0x0014) /* DMA channel 0 transfer select 20: */ +#define DMA0TSEL_21 (0x0015) /* DMA channel 0 transfer select 21: */ +#define DMA0TSEL_22 (0x0016) /* DMA channel 0 transfer select 22: */ +#define DMA0TSEL_23 (0x0017) /* DMA channel 0 transfer select 23: */ +#define DMA0TSEL_24 (0x0018) /* DMA channel 0 transfer select 24: */ +#define DMA0TSEL_25 (0x0019) /* DMA channel 0 transfer select 25: */ +#define DMA0TSEL_26 (0x001A) /* DMA channel 0 transfer select 26: */ +#define DMA0TSEL_27 (0x001B) /* DMA channel 0 transfer select 27: */ +#define DMA0TSEL_28 (0x001C) /* DMA channel 0 transfer select 28: */ +#define DMA0TSEL_29 (0x001D) /* DMA channel 0 transfer select 29: */ +#define DMA0TSEL_30 (0x001E) /* DMA channel 0 transfer select 30: previous DMA channel DMA2IFG */ +#define DMA0TSEL_31 (0x001F) /* DMA channel 0 transfer select 31: ext. Trigger (DMAE0) */ + +#define DMA1TSEL_0 (0x0000) /* DMA channel 1 transfer select 0: DMA_REQ (sw) */ +#define DMA1TSEL_1 (0x0100) /* DMA channel 1 transfer select 1: */ +#define DMA1TSEL_2 (0x0200) /* DMA channel 1 transfer select 2: */ +#define DMA1TSEL_3 (0x0300) /* DMA channel 1 transfer select 3: */ +#define DMA1TSEL_4 (0x0400) /* DMA channel 1 transfer select 4: */ +#define DMA1TSEL_5 (0x0500) /* DMA channel 1 transfer select 5: */ +#define DMA1TSEL_6 (0x0600) /* DMA channel 1 transfer select 6: */ +#define DMA1TSEL_7 (0x0700) /* DMA channel 1 transfer select 7: */ +#define DMA1TSEL_8 (0x0800) /* DMA channel 1 transfer select 8: */ +#define DMA1TSEL_9 (0x0900) /* DMA channel 1 transfer select 9: */ +#define DMA1TSEL_10 (0x0A00) /* DMA channel 1 transfer select 10: */ +#define DMA1TSEL_11 (0x0B00) /* DMA channel 1 transfer select 11: */ +#define DMA1TSEL_12 (0x0C00) /* DMA channel 1 transfer select 12: */ +#define DMA1TSEL_13 (0x0D00) /* DMA channel 1 transfer select 13: */ +#define DMA1TSEL_14 (0x0E00) /* DMA channel 1 transfer select 14: */ +#define DMA1TSEL_15 (0x0F00) /* DMA channel 1 transfer select 15: */ +#define DMA1TSEL_16 (0x1000) /* DMA channel 1 transfer select 16: */ +#define DMA1TSEL_17 (0x1100) /* DMA channel 1 transfer select 17: */ +#define DMA1TSEL_18 (0x1200) /* DMA channel 1 transfer select 18: */ +#define DMA1TSEL_19 (0x1300) /* DMA channel 1 transfer select 19: */ +#define DMA1TSEL_20 (0x1400) /* DMA channel 1 transfer select 20: */ +#define DMA1TSEL_21 (0x1500) /* DMA channel 1 transfer select 21: */ +#define DMA1TSEL_22 (0x1600) /* DMA channel 1 transfer select 22: */ +#define DMA1TSEL_23 (0x1700) /* DMA channel 1 transfer select 23: */ +#define DMA1TSEL_24 (0x1800) /* DMA channel 1 transfer select 24: */ +#define DMA1TSEL_25 (0x1900) /* DMA channel 1 transfer select 25: */ +#define DMA1TSEL_26 (0x1A00) /* DMA channel 1 transfer select 26: */ +#define DMA1TSEL_27 (0x1B00) /* DMA channel 1 transfer select 27: */ +#define DMA1TSEL_28 (0x1C00) /* DMA channel 1 transfer select 28: */ +#define DMA1TSEL_29 (0x1D00) /* DMA channel 1 transfer select 29: */ +#define DMA1TSEL_30 (0x1E00) /* DMA channel 1 transfer select 30: previous DMA channel DMA0IFG */ +#define DMA1TSEL_31 (0x1F00) /* DMA channel 1 transfer select 31: ext. Trigger (DMAE0) */ + +#define DMA2TSEL_0 (0x0000) /* DMA channel 2 transfer select 0: DMA_REQ (sw) */ +#define DMA2TSEL_1 (0x0001) /* DMA channel 2 transfer select 1: */ +#define DMA2TSEL_2 (0x0002) /* DMA channel 2 transfer select 2: */ +#define DMA2TSEL_3 (0x0003) /* DMA channel 2 transfer select 3: */ +#define DMA2TSEL_4 (0x0004) /* DMA channel 2 transfer select 4: */ +#define DMA2TSEL_5 (0x0005) /* DMA channel 2 transfer select 5: */ +#define DMA2TSEL_6 (0x0006) /* DMA channel 2 transfer select 6: */ +#define DMA2TSEL_7 (0x0007) /* DMA channel 2 transfer select 7: */ +#define DMA2TSEL_8 (0x0008) /* DMA channel 2 transfer select 8: */ +#define DMA2TSEL_9 (0x0009) /* DMA channel 2 transfer select 9: */ +#define DMA2TSEL_10 (0x000A) /* DMA channel 2 transfer select 10: */ +#define DMA2TSEL_11 (0x000B) /* DMA channel 2 transfer select 11: */ +#define DMA2TSEL_12 (0x000C) /* DMA channel 2 transfer select 12: */ +#define DMA2TSEL_13 (0x000D) /* DMA channel 2 transfer select 13: */ +#define DMA2TSEL_14 (0x000E) /* DMA channel 2 transfer select 14: */ +#define DMA2TSEL_15 (0x000F) /* DMA channel 2 transfer select 15: */ +#define DMA2TSEL_16 (0x0010) /* DMA channel 2 transfer select 16: */ +#define DMA2TSEL_17 (0x0011) /* DMA channel 2 transfer select 17: */ +#define DMA2TSEL_18 (0x0012) /* DMA channel 2 transfer select 18: */ +#define DMA2TSEL_19 (0x0013) /* DMA channel 2 transfer select 19: */ +#define DMA2TSEL_20 (0x0014) /* DMA channel 2 transfer select 20: */ +#define DMA2TSEL_21 (0x0015) /* DMA channel 2 transfer select 21: */ +#define DMA2TSEL_22 (0x0016) /* DMA channel 2 transfer select 22: */ +#define DMA2TSEL_23 (0x0017) /* DMA channel 2 transfer select 23: */ +#define DMA2TSEL_24 (0x0018) /* DMA channel 2 transfer select 24: */ +#define DMA2TSEL_25 (0x0019) /* DMA channel 2 transfer select 25: */ +#define DMA2TSEL_26 (0x001A) /* DMA channel 2 transfer select 26: */ +#define DMA2TSEL_27 (0x001B) /* DMA channel 2 transfer select 27: */ +#define DMA2TSEL_28 (0x001C) /* DMA channel 2 transfer select 28: */ +#define DMA2TSEL_29 (0x001D) /* DMA channel 2 transfer select 29: */ +#define DMA2TSEL_30 (0x001E) /* DMA channel 2 transfer select 30: previous DMA channel DMA1IFG */ +#define DMA2TSEL_31 (0x001F) /* DMA channel 2 transfer select 31: ext. Trigger (DMAE0) */ + +#define DMA0TSEL__DMAREQ (0x0000) /* DMA channel 0 transfer select 0: DMA_REQ (sw) */ +#define DMA0TSEL__TA0CCR0 (0x0001) /* DMA channel 0 transfer select 1: TA0CCR0 */ +#define DMA0TSEL__TA0CCR2 (0x0002) /* DMA channel 0 transfer select 2: TA0CCR2 */ +#define DMA0TSEL__TA1CCR0 (0x0003) /* DMA channel 0 transfer select 3: TA1CCR0 */ +#define DMA0TSEL__TA1CCR2 (0x0004) /* DMA channel 0 transfer select 4: TA1CCR2 */ +#define DMA0TSEL__TA2CCR0 (0x0005) /* DMA channel 0 transfer select 3: TA2CCR0 */ +#define DMA0TSEL__TA3CCR0 (0x0006) /* DMA channel 0 transfer select 4: TA3CCR0 */ +#define DMA0TSEL__TB0CCR0 (0x0007) /* DMA channel 0 transfer select 7: TB0CCR0 */ +#define DMA0TSEL__TB0CCR2 (0x0008) /* DMA channel 0 transfer select 8: TB0CCR2 */ +#define DMA0TSEL__RES9 (0x0009) /* DMA channel 0 transfer select 9: RES9 */ +#define DMA0TSEL__RES10 (0x000A) /* DMA channel 0 transfer select 10: RES10 */ +#define DMA0TSEL__RES11 (0x000B) /* DMA channel 0 transfer select 11: RES11 */ +#define DMA0TSEL__RES12 (0x000C) /* DMA channel 0 transfer select 12: RES12 */ +#define DMA0TSEL__RES13 (0x000D) /* DMA channel 0 transfer select 13: RES13 */ +#define DMA0TSEL__UCA0RXIFG (0x000E) /* DMA channel 0 transfer select 14: UCA0RXIFG */ +#define DMA0TSEL__UCA0TXIFG (0x000F) /* DMA channel 0 transfer select 15: UCA0TXIFG */ +#define DMA0TSEL__UCA1RXIFG (0x0010) /* DMA channel 0 transfer select 16: UCA1RXIFG */ +#define DMA0TSEL__UCA1TXIFG (0x0011) /* DMA channel 0 transfer select 17: UCA1TXIFG */ +#define DMA0TSEL__UCB0RXIFG0 (0x0012) /* DMA channel 0 transfer select 18: UCB0RXIFG0 */ +#define DMA0TSEL__UCB0TXIFG0 (0x0013) /* DMA channel 0 transfer select 19: UCB0TXIFG0 */ +#define DMA0TSEL__UCB0RXIFG1 (0x0014) /* DMA channel 0 transfer select 20: UCB0RXIFG1 */ +#define DMA0TSEL__UCB0TXIFG1 (0x0015) /* DMA channel 0 transfer select 21: UCB0TXIFG1 */ +#define DMA0TSEL__UCB0RXIFG2 (0x0016) /* DMA channel 0 transfer select 22: UCB0RXIFG2 */ +#define DMA0TSEL__UCB0TXIFG2 (0x0017) /* DMA channel 0 transfer select 23: UCB0TXIFG2 */ +#define DMA0TSEL__UCB0RXIFG3 (0x0018) /* DMA channel 0 transfer select 24: UCB0RXIFG3 */ +#define DMA0TSEL__UCB0TXIFG3 (0x0019) /* DMA channel 0 transfer select 25: UCB0TXIFG3 */ +#define DMA0TSEL__ADC12IFG (0x001A) /* DMA channel 0 transfer select 26: ADC12IFG */ +#define DMA0TSEL__RES27 (0x001B) /* DMA channel 0 transfer select 27: RES27 */ +#define DMA0TSEL__RES28 (0x001C) /* DMA channel 0 transfer select 28: RES28 */ +#define DMA0TSEL__MPY (0x001D) /* DMA channel 0 transfer select 29: MPY */ +#define DMA0TSEL__DMA2IFG (0x001E) /* DMA channel 0 transfer select 30: previous DMA channel DMA2IFG */ +#define DMA0TSEL__DMAE0 (0x001F) /* DMA channel 0 transfer select 31: ext. Trigger (DMAE0) */ + +#define DMA1TSEL__DMAREQ (0x0000) /* DMA channel 1 transfer select 0: DMA_REQ (sw) */ +#define DMA1TSEL__TA0CCR0 (0x0100) /* DMA channel 1 transfer select 1: TA0CCR0 */ +#define DMA1TSEL__TA0CCR2 (0x0200) /* DMA channel 1 transfer select 2: TA0CCR2 */ +#define DMA1TSEL__TA1CCR0 (0x0300) /* DMA channel 1 transfer select 3: TA1CCR0 */ +#define DMA1TSEL__TA1CCR2 (0x0400) /* DMA channel 1 transfer select 4: TA1CCR2 */ +#define DMA1TSEL__TA2CCR0 (0x0500) /* DMA channel 1 transfer select 5: TA2CCR0 */ +#define DMA1TSEL__TA3CCR0 (0x0600) /* DMA channel 1 transfer select 6: TA3CCR0 */ +#define DMA1TSEL__TB0CCR0 (0x0700) /* DMA channel 1 transfer select 7: TB0CCR0 */ +#define DMA1TSEL__TB0CCR2 (0x0800) /* DMA channel 1 transfer select 8: TB0CCR2 */ +#define DMA1TSEL__RES9 (0x0900) /* DMA channel 1 transfer select 9: RES9 */ +#define DMA1TSEL__RES10 (0x0A00) /* DMA channel 1 transfer select 10: RES10 */ +#define DMA1TSEL__RES11 (0x0B00) /* DMA channel 1 transfer select 11: RES11 */ +#define DMA1TSEL__RES12 (0x0C00) /* DMA channel 1 transfer select 12: RES12 */ +#define DMA1TSEL__RES13 (0x0D00) /* DMA channel 1 transfer select 13: RES13 */ +#define DMA1TSEL__UCA0RXIFG (0x0E00) /* DMA channel 1 transfer select 14: UCA0RXIFG */ +#define DMA1TSEL__UCA0TXIFG (0x0F00) /* DMA channel 1 transfer select 15: UCA0TXIFG */ +#define DMA1TSEL__UCA1RXIFG (0x1000) /* DMA channel 1 transfer select 16: UCA1RXIFG */ +#define DMA1TSEL__UCA1TXIFG (0x1100) /* DMA channel 1 transfer select 17: UCA1TXIFG */ +#define DMA1TSEL__UCB0RXIFG0 (0x1200) /* DMA channel 1 transfer select 18: UCB0RXIFG0 */ +#define DMA1TSEL__UCB0TXIFG0 (0x1300) /* DMA channel 1 transfer select 19: UCB0TXIFG0 */ +#define DMA1TSEL__UCB0RXIFG1 (0x1400) /* DMA channel 1 transfer select 20: UCB0RXIFG1 */ +#define DMA1TSEL__UCB0TXIFG1 (0x1500) /* DMA channel 1 transfer select 21: UCB0TXIFG1 */ +#define DMA1TSEL__UCB0RXIFG2 (0x1600) /* DMA channel 1 transfer select 22: UCB0RXIFG2 */ +#define DMA1TSEL__UCB0TXIFG2 (0x1700) /* DMA channel 1 transfer select 23: UCB0TXIFG2 */ +#define DMA1TSEL__UCB0RXIFG3 (0x1800) /* DMA channel 1 transfer select 24: UCB0RXIFG3 */ +#define DMA1TSEL__UCB0TXIFG3 (0x1900) /* DMA channel 1 transfer select 25: UCB0TXIFG3 */ +#define DMA1TSEL__ADC12IFG (0x1A00) /* DMA channel 1 transfer select 26: ADC12IFG */ +#define DMA1TSEL__RES27 (0x1B00) /* DMA channel 1 transfer select 27: RES27 */ +#define DMA1TSEL__RES28 (0x1C00) /* DMA channel 1 transfer select 28: RES28 */ +#define DMA1TSEL__MPY (0x1D00) /* DMA channel 1 transfer select 29: MPY */ +#define DMA1TSEL__DMA2IFG (0x1E00) /* DMA channel 1 transfer select 30: previous DMA channel DMA2IFG */ +#define DMA1TSEL__DMAE0 (0x1F00) /* DMA channel 1 transfer select 31: ext. Trigger (DMAE0) */ + +#define DMA2TSEL__DMAREQ (0x0000) /* DMA channel 2 transfer select 0: DMA_REQ (sw) */ +#define DMA2TSEL__TA0CCR0 (0x0001) /* DMA channel 2 transfer select 1: TA0CCR0 */ +#define DMA2TSEL__TA0CCR2 (0x0002) /* DMA channel 2 transfer select 2: TA0CCR2 */ +#define DMA2TSEL__TA1CCR0 (0x0003) /* DMA channel 2 transfer select 3: TA1CCR0 */ +#define DMA2TSEL__TA1CCR2 (0x0004) /* DMA channel 2 transfer select 4: TA1CCR2 */ +#define DMA2TSEL__TA2CCR0 (0x0005) /* DMA channel 2 transfer select 5: TA2CCR0 */ +#define DMA2TSEL__TA3CCR0 (0x0006) /* DMA channel 2 transfer select 6: TA3CCR0 */ +#define DMA2TSEL__TB0CCR0 (0x0007) /* DMA channel 2 transfer select 7: TB0CCR0 */ +#define DMA2TSEL__TB0CCR2 (0x0008) /* DMA channel 2 transfer select 8: TB0CCR2 */ +#define DMA2TSEL__RES9 (0x0009) /* DMA channel 2 transfer select 9: RES9 */ +#define DMA2TSEL__RES10 (0x000A) /* DMA channel 2 transfer select 10: RES10 */ +#define DMA2TSEL__RES11 (0x000B) /* DMA channel 2 transfer select 11: RES11 */ +#define DMA2TSEL__RES12 (0x000C) /* DMA channel 2 transfer select 12: RES12 */ +#define DMA2TSEL__RES13 (0x000D) /* DMA channel 2 transfer select 13: RES13 */ +#define DMA2TSEL__UCA0RXIFG (0x000E) /* DMA channel 2 transfer select 14: UCA0RXIFG */ +#define DMA2TSEL__UCA0TXIFG (0x000F) /* DMA channel 2 transfer select 15: UCA0TXIFG */ +#define DMA2TSEL__UCA1RXIFG (0x0010) /* DMA channel 2 transfer select 16: UCA1RXIFG */ +#define DMA2TSEL__UCA1TXIFG (0x0011) /* DMA channel 2 transfer select 17: UCA1TXIFG */ +#define DMA2TSEL__UCB0RXIFG0 (0x0012) /* DMA channel 2 transfer select 18: UCB0RXIFG0 */ +#define DMA2TSEL__UCB0TXIFG0 (0x0013) /* DMA channel 2 transfer select 19: UCB0TXIFG0 */ +#define DMA2TSEL__UCB0RXIFG1 (0x0014) /* DMA channel 2 transfer select 20: UCB0RXIFG1 */ +#define DMA2TSEL__UCB0TXIFG1 (0x0015) /* DMA channel 2 transfer select 21: UCB0TXIFG1 */ +#define DMA2TSEL__UCB0RXIFG2 (0x0016) /* DMA channel 2 transfer select 22: UCB0RXIFG2 */ +#define DMA2TSEL__UCB0TXIFG2 (0x0017) /* DMA channel 2 transfer select 23: UCB0TXIFG2 */ +#define DMA2TSEL__UCB0RXIFG3 (0x0018) /* DMA channel 2 transfer select 24: UCB0RXIFG3 */ +#define DMA2TSEL__UCB0TXIFG3 (0x0019) /* DMA channel 2 transfer select 25: UCB0TXIFG3 */ +#define DMA2TSEL__ADC12IFG (0x001A) /* DMA channel 2 transfer select 26: ADC12IFG */ +#define DMA2TSEL__RES27 (0x001B) /* DMA channel 2 transfer select 27: RES27 */ +#define DMA2TSEL__RES28 (0x001C) /* DMA channel 2 transfer select 28: RES28 */ +#define DMA2TSEL__MPY (0x001D) /* DMA channel 2 transfer select 29: MPY */ +#define DMA2TSEL__DMA2IFG (0x001E) /* DMA channel 2 transfer select 30: previous DMA channel DMA2IFG */ +#define DMA2TSEL__DMAE0 (0x001F) /* DMA channel 2 transfer select 31: ext. Trigger (DMAE0) */ + +/************************************************************* +* FRAM Memory +*************************************************************/ +#define __MSP430_HAS_FRAM__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_FRAM__ 0x0140 +#define FRAM_BASE __MSP430_BASEADDRESS_FRAM__ +#define __MSP430_HAS_GC__ /* Definition to show that Module is available */ + +sfr_w(FRCTL0); /* FRAM Controller Control 0 */ +sfr_b(FRCTL0_L); /* FRAM Controller Control 0 */ +sfr_b(FRCTL0_H); /* FRAM Controller Control 0 */ +sfr_w(GCCTL0); /* General Control 0 */ +sfr_b(GCCTL0_L); /* General Control 0 */ +sfr_b(GCCTL0_H); /* General Control 0 */ +sfr_w(GCCTL1); /* General Control 1 */ +sfr_b(GCCTL1_L); /* General Control 1 */ +sfr_b(GCCTL1_H); /* General Control 1 */ + +#define FRCTLPW (0xA500) /* FRAM password for write */ +#define FRPW (0x9600) /* FRAM password returned by read */ +#define FWPW (0xA500) /* FRAM password for write */ +#define FXPW (0x3300) /* for use with XOR instruction */ + +/* FRCTL0 Control Bits */ +//#define RESERVED (0x0001) /* RESERVED */ +//#define RESERVED (0x0002) /* RESERVED */ +//#define RESERVED (0x0004) /* RESERVED */ +#define NWAITS0 (0x0010) /* FRAM Wait state control Bit: 0 */ +#define NWAITS1 (0x0020) /* FRAM Wait state control Bit: 1 */ +#define NWAITS2 (0x0040) /* FRAM Wait state control Bit: 2 */ +//#define RESERVED (0x0080) /* RESERVED */ + +/* FRCTL0 Control Bits */ +//#define RESERVED (0x0001) /* RESERVED */ +//#define RESERVED (0x0002) /* RESERVED */ +//#define RESERVED (0x0004) /* RESERVED */ +#define NWAITS0_L (0x0010) /* FRAM Wait state control Bit: 0 */ +#define NWAITS1_L (0x0020) /* FRAM Wait state control Bit: 1 */ +#define NWAITS2_L (0x0040) /* FRAM Wait state control Bit: 2 */ +//#define RESERVED (0x0080) /* RESERVED */ + +#define NWAITS_0 (0x0000) /* FRAM Wait state control: 0 */ +#define NWAITS_1 (0x0010) /* FRAM Wait state control: 1 */ +#define NWAITS_2 (0x0020) /* FRAM Wait state control: 2 */ +#define NWAITS_3 (0x0030) /* FRAM Wait state control: 3 */ +#define NWAITS_4 (0x0040) /* FRAM Wait state control: 4 */ +#define NWAITS_5 (0x0050) /* FRAM Wait state control: 5 */ +#define NWAITS_6 (0x0060) /* FRAM Wait state control: 6 */ +#define NWAITS_7 (0x0070) /* FRAM Wait state control: 7 */ + +/* Legacy Defines */ +#define NACCESS0 (0x0010) /* FRAM Wait state Generator Access Time control Bit: 0 */ +#define NACCESS1 (0x0020) /* FRAM Wait state Generator Access Time control Bit: 1 */ +#define NACCESS2 (0x0040) /* FRAM Wait state Generator Access Time control Bit: 2 */ +#define NACCESS_0 (0x0000) /* FRAM Wait state Generator Access Time control: 0 */ +#define NACCESS_1 (0x0010) /* FRAM Wait state Generator Access Time control: 1 */ +#define NACCESS_2 (0x0020) /* FRAM Wait state Generator Access Time control: 2 */ +#define NACCESS_3 (0x0030) /* FRAM Wait state Generator Access Time control: 3 */ +#define NACCESS_4 (0x0040) /* FRAM Wait state Generator Access Time control: 4 */ +#define NACCESS_5 (0x0050) /* FRAM Wait state Generator Access Time control: 5 */ +#define NACCESS_6 (0x0060) /* FRAM Wait state Generator Access Time control: 6 */ +#define NACCESS_7 (0x0070) /* FRAM Wait state Generator Access Time control: 7 */ + +/* GCCTL0 Control Bits */ +//#define RESERVED (0x0001) /* RESERVED */ +#define FRLPMPWR (0x0002) /* FRAM Enable FRAM auto power up after LPM */ +#define FRPWR (0x0004) /* FRAM Power Control */ +#define ACCTEIE (0x0008) /* RESERVED */ +//#define RESERVED (0x0010) /* RESERVED */ +#define CBDIE (0x0020) /* Enable NMI event if correctable bit error detected */ +#define UBDIE (0x0040) /* Enable NMI event if uncorrectable bit error detected */ +#define UBDRSTEN (0x0080) /* Enable Power Up Clear (PUC) reset if FRAM uncorrectable bit error detected */ + +/* GCCTL0 Control Bits */ +//#define RESERVED (0x0001) /* RESERVED */ +#define FRLPMPWR_L (0x0002) /* FRAM Enable FRAM auto power up after LPM */ +#define FRPWR_L (0x0004) /* FRAM Power Control */ +#define ACCTEIE_L (0x0008) /* RESERVED */ +//#define RESERVED (0x0010) /* RESERVED */ +#define CBDIE_L (0x0020) /* Enable NMI event if correctable bit error detected */ +#define UBDIE_L (0x0040) /* Enable NMI event if uncorrectable bit error detected */ +#define UBDRSTEN_L (0x0080) /* Enable Power Up Clear (PUC) reset if FRAM uncorrectable bit error detected */ + +/* GCCTL1 Control Bits */ +//#define RESERVED (0x0001) /* RESERVED */ +#define CBDIFG (0x0002) /* FRAM correctable bit error flag */ +#define UBDIFG (0x0004) /* FRAM uncorrectable bit error flag */ +#define ACCTEIFG (0x0008) /* Access time error flag */ + +/* GCCTL1 Control Bits */ +//#define RESERVED (0x0001) /* RESERVED */ +#define CBDIFG_L (0x0002) /* FRAM correctable bit error flag */ +#define UBDIFG_L (0x0004) /* FRAM uncorrectable bit error flag */ +#define ACCTEIFG_L (0x0008) /* Access time error flag */ + +/************************************************************ +* Memory Protection Unit +************************************************************/ +#define __MSP430_HAS_MPU__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_MPU__ 0x05A0 +#define MPU_BASE __MSP430_BASEADDRESS_MPU__ + +sfr_w(MPUCTL0); /* MPU Control Register 0 */ +sfr_b(MPUCTL0_L); /* MPU Control Register 0 */ +sfr_b(MPUCTL0_H); /* MPU Control Register 0 */ +sfr_w(MPUCTL1); /* MPU Control Register 1 */ +sfr_b(MPUCTL1_L); /* MPU Control Register 1 */ +sfr_b(MPUCTL1_H); /* MPU Control Register 1 */ +sfr_w(MPUSEGB2); /* MPU Segmentation Border 2 Register */ +sfr_b(MPUSEGB2_L); /* MPU Segmentation Border 2 Register */ +sfr_b(MPUSEGB2_H); /* MPU Segmentation Border 2 Register */ +sfr_w(MPUSEGB1); /* MPU Segmentation Border 1 Register */ +sfr_b(MPUSEGB1_L); /* MPU Segmentation Border 1 Register */ +sfr_b(MPUSEGB1_H); /* MPU Segmentation Border 1 Register */ +sfr_w(MPUSAM); /* MPU Access Management Register */ +sfr_b(MPUSAM_L); /* MPU Access Management Register */ +sfr_b(MPUSAM_H); /* MPU Access Management Register */ +sfr_w(MPUIPC0); /* MPU IP Control 0 Register */ +sfr_b(MPUIPC0_L); /* MPU IP Control 0 Register */ +sfr_b(MPUIPC0_H); /* MPU IP Control 0 Register */ +sfr_w(MPUIPSEGB2); /* MPU IP Segment Border 2 Register */ +sfr_b(MPUIPSEGB2_L); /* MPU IP Segment Border 2 Register */ +sfr_b(MPUIPSEGB2_H); /* MPU IP Segment Border 2 Register */ +sfr_w(MPUIPSEGB1); /* MPU IP Segment Border 1 Register */ +sfr_b(MPUIPSEGB1_L); /* MPU IP Segment Border 1 Register */ +sfr_b(MPUIPSEGB1_H); /* MPU IP Segment Border 1 Register */ + +/* MPUCTL0 Control Bits */ +#define MPUENA (0x0001) /* MPU Enable */ +#define MPULOCK (0x0002) /* MPU Lock */ +#define MPUSEGIE (0x0010) /* MPU Enable NMI on Segment violation */ + +/* MPUCTL0 Control Bits */ +#define MPUENA_L (0x0001) /* MPU Enable */ +#define MPULOCK_L (0x0002) /* MPU Lock */ +#define MPUSEGIE_L (0x0010) /* MPU Enable NMI on Segment violation */ + +#define MPUPW (0xA500) /* MPU Access Password */ +#define MPUPW_H (0xA5) /* MPU Access Password */ + +/* MPUCTL1 Control Bits */ +#define MPUSEG1IFG (0x0001) /* MPU Main Memory Segment 1 violation interupt flag */ +#define MPUSEG2IFG (0x0002) /* MPU Main Memory Segment 2 violation interupt flag */ +#define MPUSEG3IFG (0x0004) /* MPU Main Memory Segment 3 violation interupt flag */ +#define MPUSEGIIFG (0x0008) /* MPU Info Memory Segment violation interupt flag */ +#define MPUSEGIPIFG (0x0010) /* MPU IP Memory Segment violation interupt flag */ + +/* MPUCTL1 Control Bits */ +#define MPUSEG1IFG_L (0x0001) /* MPU Main Memory Segment 1 violation interupt flag */ +#define MPUSEG2IFG_L (0x0002) /* MPU Main Memory Segment 2 violation interupt flag */ +#define MPUSEG3IFG_L (0x0004) /* MPU Main Memory Segment 3 violation interupt flag */ +#define MPUSEGIIFG_L (0x0008) /* MPU Info Memory Segment violation interupt flag */ +#define MPUSEGIPIFG_L (0x0010) /* MPU IP Memory Segment violation interupt flag */ + +/* MPUSEGB2 Control Bits */ + +/* MPUSEGB2 Control Bits */ + +/* MPUSEGB2 Control Bits */ + +/* MPUSEGB1 Control Bits */ + +/* MPUSEGB1 Control Bits */ + +/* MPUSEGB1 Control Bits */ + +/* MPUSAM Control Bits */ +#define MPUSEG1RE (0x0001) /* MPU Main memory Segment 1 Read enable */ +#define MPUSEG1WE (0x0002) /* MPU Main memory Segment 1 Write enable */ +#define MPUSEG1XE (0x0004) /* MPU Main memory Segment 1 Execute enable */ +#define MPUSEG1VS (0x0008) /* MPU Main memory Segment 1 Violation select */ +#define MPUSEG2RE (0x0010) /* MPU Main memory Segment 2 Read enable */ +#define MPUSEG2WE (0x0020) /* MPU Main memory Segment 2 Write enable */ +#define MPUSEG2XE (0x0040) /* MPU Main memory Segment 2 Execute enable */ +#define MPUSEG2VS (0x0080) /* MPU Main memory Segment 2 Violation select */ +#define MPUSEG3RE (0x0100) /* MPU Main memory Segment 3 Read enable */ +#define MPUSEG3WE (0x0200) /* MPU Main memory Segment 3 Write enable */ +#define MPUSEG3XE (0x0400) /* MPU Main memory Segment 3 Execute enable */ +#define MPUSEG3VS (0x0800) /* MPU Main memory Segment 3 Violation select */ +#define MPUSEGIRE (0x1000) /* MPU Info memory Segment Read enable */ +#define MPUSEGIWE (0x2000) /* MPU Info memory Segment Write enable */ +#define MPUSEGIXE (0x4000) /* MPU Info memory Segment Execute enable */ +#define MPUSEGIVS (0x8000) /* MPU Info memory Segment Violation select */ + +/* MPUSAM Control Bits */ +#define MPUSEG1RE_L (0x0001) /* MPU Main memory Segment 1 Read enable */ +#define MPUSEG1WE_L (0x0002) /* MPU Main memory Segment 1 Write enable */ +#define MPUSEG1XE_L (0x0004) /* MPU Main memory Segment 1 Execute enable */ +#define MPUSEG1VS_L (0x0008) /* MPU Main memory Segment 1 Violation select */ +#define MPUSEG2RE_L (0x0010) /* MPU Main memory Segment 2 Read enable */ +#define MPUSEG2WE_L (0x0020) /* MPU Main memory Segment 2 Write enable */ +#define MPUSEG2XE_L (0x0040) /* MPU Main memory Segment 2 Execute enable */ +#define MPUSEG2VS_L (0x0080) /* MPU Main memory Segment 2 Violation select */ + +/* MPUSAM Control Bits */ +#define MPUSEG3RE_H (0x0001) /* MPU Main memory Segment 3 Read enable */ +#define MPUSEG3WE_H (0x0002) /* MPU Main memory Segment 3 Write enable */ +#define MPUSEG3XE_H (0x0004) /* MPU Main memory Segment 3 Execute enable */ +#define MPUSEG3VS_H (0x0008) /* MPU Main memory Segment 3 Violation select */ +#define MPUSEGIRE_H (0x0010) /* MPU Info memory Segment Read enable */ +#define MPUSEGIWE_H (0x0020) /* MPU Info memory Segment Write enable */ +#define MPUSEGIXE_H (0x0040) /* MPU Info memory Segment Execute enable */ +#define MPUSEGIVS_H (0x0080) /* MPU Info memory Segment Violation select */ + +/* MPUIPC0 Control Bits */ +#define MPUIPVS (0x0020) /* MPU MPU IP protection segment Violation Select */ +#define MPUIPENA (0x0040) /* MPU MPU IP Protection Enable */ +#define MPUIPLOCK (0x0080) /* MPU IP Protection Lock */ + +/* MPUIPC0 Control Bits */ +#define MPUIPVS_L (0x0020) /* MPU MPU IP protection segment Violation Select */ +#define MPUIPENA_L (0x0040) /* MPU MPU IP Protection Enable */ +#define MPUIPLOCK_L (0x0080) /* MPU IP Protection Lock */ + +/* MPUIPSEGB2 Control Bits */ + +/* MPUIPSEGB2 Control Bits */ + +/* MPUIPSEGB2 Control Bits */ + +/* MPUIPSEGB1 Control Bits */ + +/* MPUIPSEGB1 Control Bits */ + +/* MPUIPSEGB1 Control Bits */ + +/************************************************************ +* HARDWARE MULTIPLIER 32Bit +************************************************************/ +#define __MSP430_HAS_MPY32__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_MPY32__ 0x04C0 +#define MPY32_BASE __MSP430_BASEADDRESS_MPY32__ + +sfr_w(MPY); /* Multiply Unsigned/Operand 1 */ +sfr_b(MPY_L); /* Multiply Unsigned/Operand 1 */ +sfr_b(MPY_H); /* Multiply Unsigned/Operand 1 */ +sfr_w(MPYS); /* Multiply Signed/Operand 1 */ +sfr_b(MPYS_L); /* Multiply Signed/Operand 1 */ +sfr_b(MPYS_H); /* Multiply Signed/Operand 1 */ +sfr_w(MAC); /* Multiply Unsigned and Accumulate/Operand 1 */ +sfr_b(MAC_L); /* Multiply Unsigned and Accumulate/Operand 1 */ +sfr_b(MAC_H); /* Multiply Unsigned and Accumulate/Operand 1 */ +sfr_w(MACS); /* Multiply Signed and Accumulate/Operand 1 */ +sfr_b(MACS_L); /* Multiply Signed and Accumulate/Operand 1 */ +sfr_b(MACS_H); /* Multiply Signed and Accumulate/Operand 1 */ +sfr_w(OP2); /* Operand 2 */ +sfr_b(OP2_L); /* Operand 2 */ +sfr_b(OP2_H); /* Operand 2 */ +sfr_w(RESLO); /* Result Low Word */ +sfr_b(RESLO_L); /* Result Low Word */ +sfr_b(RESLO_H); /* Result Low Word */ +sfr_w(RESHI); /* Result High Word */ +sfr_b(RESHI_L); /* Result High Word */ +sfr_b(RESHI_H); /* Result High Word */ +sfr_w(SUMEXT); /* Sum Extend */ +sfr_b(SUMEXT_L); /* Sum Extend */ +sfr_b(SUMEXT_H); /* Sum Extend */ + +sfr_w(MPY32L); /* 32-bit operand 1 - multiply - low word */ +sfr_b(MPY32L_L); /* 32-bit operand 1 - multiply - low word */ +sfr_b(MPY32L_H); /* 32-bit operand 1 - multiply - low word */ +sfr_w(MPY32H); /* 32-bit operand 1 - multiply - high word */ +sfr_b(MPY32H_L); /* 32-bit operand 1 - multiply - high word */ +sfr_b(MPY32H_H); /* 32-bit operand 1 - multiply - high word */ +sfr_w(MPYS32L); /* 32-bit operand 1 - signed multiply - low word */ +sfr_b(MPYS32L_L); /* 32-bit operand 1 - signed multiply - low word */ +sfr_b(MPYS32L_H); /* 32-bit operand 1 - signed multiply - low word */ +sfr_w(MPYS32H); /* 32-bit operand 1 - signed multiply - high word */ +sfr_b(MPYS32H_L); /* 32-bit operand 1 - signed multiply - high word */ +sfr_b(MPYS32H_H); /* 32-bit operand 1 - signed multiply - high word */ +sfr_w(MAC32L); /* 32-bit operand 1 - multiply accumulate - low word */ +sfr_b(MAC32L_L); /* 32-bit operand 1 - multiply accumulate - low word */ +sfr_b(MAC32L_H); /* 32-bit operand 1 - multiply accumulate - low word */ +sfr_w(MAC32H); /* 32-bit operand 1 - multiply accumulate - high word */ +sfr_b(MAC32H_L); /* 32-bit operand 1 - multiply accumulate - high word */ +sfr_b(MAC32H_H); /* 32-bit operand 1 - multiply accumulate - high word */ +sfr_w(MACS32L); /* 32-bit operand 1 - signed multiply accumulate - low word */ +sfr_b(MACS32L_L); /* 32-bit operand 1 - signed multiply accumulate - low word */ +sfr_b(MACS32L_H); /* 32-bit operand 1 - signed multiply accumulate - low word */ +sfr_w(MACS32H); /* 32-bit operand 1 - signed multiply accumulate - high word */ +sfr_b(MACS32H_L); /* 32-bit operand 1 - signed multiply accumulate - high word */ +sfr_b(MACS32H_H); /* 32-bit operand 1 - signed multiply accumulate - high word */ +sfr_w(OP2L); /* 32-bit operand 2 - low word */ +sfr_b(OP2L_L); /* 32-bit operand 2 - low word */ +sfr_b(OP2L_H); /* 32-bit operand 2 - low word */ +sfr_w(OP2H); /* 32-bit operand 2 - high word */ +sfr_b(OP2H_L); /* 32-bit operand 2 - high word */ +sfr_b(OP2H_H); /* 32-bit operand 2 - high word */ +sfr_w(RES0); /* 32x32-bit result 0 - least significant word */ +sfr_b(RES0_L); /* 32x32-bit result 0 - least significant word */ +sfr_b(RES0_H); /* 32x32-bit result 0 - least significant word */ +sfr_w(RES1); /* 32x32-bit result 1 */ +sfr_b(RES1_L); /* 32x32-bit result 1 */ +sfr_b(RES1_H); /* 32x32-bit result 1 */ +sfr_w(RES2); /* 32x32-bit result 2 */ +sfr_b(RES2_L); /* 32x32-bit result 2 */ +sfr_b(RES2_H); /* 32x32-bit result 2 */ +sfr_w(RES3); /* 32x32-bit result 3 - most significant word */ +sfr_b(RES3_L); /* 32x32-bit result 3 - most significant word */ +sfr_b(RES3_H); /* 32x32-bit result 3 - most significant word */ +sfr_w(MPY32CTL0); /* MPY32 Control Register 0 */ +sfr_b(MPY32CTL0_L); /* MPY32 Control Register 0 */ +sfr_b(MPY32CTL0_H); /* MPY32 Control Register 0 */ + +#define MPY_B MPY_L /* Multiply Unsigned/Operand 1 (Byte Access) */ +#define MPYS_B MPYS_L /* Multiply Signed/Operand 1 (Byte Access) */ +#define MAC_B MAC_L /* Multiply Unsigned and Accumulate/Operand 1 (Byte Access) */ +#define MACS_B MACS_L /* Multiply Signed and Accumulate/Operand 1 (Byte Access) */ +#define OP2_B OP2_L /* Operand 2 (Byte Access) */ +#define MPY32L_B MPY32L_L /* 32-bit operand 1 - multiply - low word (Byte Access) */ +#define MPY32H_B MPY32H_L /* 32-bit operand 1 - multiply - high word (Byte Access) */ +#define MPYS32L_B MPYS32L_L /* 32-bit operand 1 - signed multiply - low word (Byte Access) */ +#define MPYS32H_B MPYS32H_L /* 32-bit operand 1 - signed multiply - high word (Byte Access) */ +#define MAC32L_B MAC32L_L /* 32-bit operand 1 - multiply accumulate - low word (Byte Access) */ +#define MAC32H_B MAC32H_L /* 32-bit operand 1 - multiply accumulate - high word (Byte Access) */ +#define MACS32L_B MACS32L_L /* 32-bit operand 1 - signed multiply accumulate - low word (Byte Access) */ +#define MACS32H_B MACS32H_L /* 32-bit operand 1 - signed multiply accumulate - high word (Byte Access) */ +#define OP2L_B OP2L_L /* 32-bit operand 2 - low word (Byte Access) */ +#define OP2H_B OP2H_L /* 32-bit operand 2 - high word (Byte Access) */ + +/* MPY32CTL0 Control Bits */ +#define MPYC (0x0001) /* Carry of the multiplier */ +//#define RESERVED (0x0002) /* Reserved */ +#define MPYFRAC (0x0004) /* Fractional mode */ +#define MPYSAT (0x0008) /* Saturation mode */ +#define MPYM0 (0x0010) /* Multiplier mode Bit:0 */ +#define MPYM1 (0x0020) /* Multiplier mode Bit:1 */ +#define OP1_32 (0x0040) /* Bit-width of operand 1 0:16Bit / 1:32Bit */ +#define OP2_32 (0x0080) /* Bit-width of operand 2 0:16Bit / 1:32Bit */ +#define MPYDLYWRTEN (0x0100) /* Delayed write enable */ +#define MPYDLY32 (0x0200) /* Delayed write mode */ + +/* MPY32CTL0 Control Bits */ +#define MPYC_L (0x0001) /* Carry of the multiplier */ +//#define RESERVED (0x0002) /* Reserved */ +#define MPYFRAC_L (0x0004) /* Fractional mode */ +#define MPYSAT_L (0x0008) /* Saturation mode */ +#define MPYM0_L (0x0010) /* Multiplier mode Bit:0 */ +#define MPYM1_L (0x0020) /* Multiplier mode Bit:1 */ +#define OP1_32_L (0x0040) /* Bit-width of operand 1 0:16Bit / 1:32Bit */ +#define OP2_32_L (0x0080) /* Bit-width of operand 2 0:16Bit / 1:32Bit */ + +/* MPY32CTL0 Control Bits */ +//#define RESERVED (0x0002) /* Reserved */ +#define MPYDLYWRTEN_H (0x0001) /* Delayed write enable */ +#define MPYDLY32_H (0x0002) /* Delayed write mode */ + +#define MPYM_0 (0x0000) /* Multiplier mode: MPY */ +#define MPYM_1 (0x0010) /* Multiplier mode: MPYS */ +#define MPYM_2 (0x0020) /* Multiplier mode: MAC */ +#define MPYM_3 (0x0030) /* Multiplier mode: MACS */ +#define MPYM__MPY (0x0000) /* Multiplier mode: MPY */ +#define MPYM__MPYS (0x0010) /* Multiplier mode: MPYS */ +#define MPYM__MAC (0x0020) /* Multiplier mode: MAC */ +#define MPYM__MACS (0x0030) /* Multiplier mode: MACS */ + +/************************************************************ +* PMM - Power Management System for FRAM +************************************************************/ +#define __MSP430_HAS_PMM_FRAM__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PMM_FRAM__ 0x0120 +#define PMM_BASE __MSP430_BASEADDRESS_PMM_FRAM__ + +sfr_w(PMMCTL0); /* PMM Control 0 */ +sfr_b(PMMCTL0_L); /* PMM Control 0 */ +sfr_b(PMMCTL0_H); /* PMM Control 0 */ +sfr_w(PMMIFG); /* PMM Interrupt Flag */ +sfr_b(PMMIFG_L); /* PMM Interrupt Flag */ +sfr_b(PMMIFG_H); /* PMM Interrupt Flag */ +sfr_w(PM5CTL0); /* PMM Power Mode 5 Control Register 0 */ +sfr_b(PM5CTL0_L); /* PMM Power Mode 5 Control Register 0 */ +sfr_b(PM5CTL0_H); /* PMM Power Mode 5 Control Register 0 */ + +#define PMMPW (0xA500) /* PMM Register Write Password */ +#define PMMPW_H (0xA5) /* PMM Register Write Password for high word access */ + +/* PMMCTL0 Control Bits */ +#define PMMSWBOR (0x0004) /* PMM Software BOR */ +#define PMMSWPOR (0x0008) /* PMM Software POR */ +#define PMMREGOFF (0x0010) /* PMM Turn Regulator off */ +#define SVSHE (0x0040) /* SVS high side enable */ +#define PMMLPRST (0x0080) /* PMM Low-Power Reset Enable */ + +/* PMMCTL0 Control Bits */ +#define PMMSWBOR_L (0x0004) /* PMM Software BOR */ +#define PMMSWPOR_L (0x0008) /* PMM Software POR */ +#define PMMREGOFF_L (0x0010) /* PMM Turn Regulator off */ +#define SVSHE_L (0x0040) /* SVS high side enable */ +#define PMMLPRST_L (0x0080) /* PMM Low-Power Reset Enable */ + +/* PMMIFG Control Bits */ +#define PMMBORIFG (0x0100) /* PMM Software BOR interrupt flag */ +#define PMMRSTIFG (0x0200) /* PMM RESET pin interrupt flag */ +#define PMMPORIFG (0x0400) /* PMM Software POR interrupt flag */ +#define SVSHIFG (0x2000) /* SVS low side interrupt flag */ +#define PMMLPM5IFG (0x8000) /* LPM5 indication Flag */ + +/* PMMIFG Control Bits */ +#define PMMBORIFG_H (0x0001) /* PMM Software BOR interrupt flag */ +#define PMMRSTIFG_H (0x0002) /* PMM RESET pin interrupt flag */ +#define PMMPORIFG_H (0x0004) /* PMM Software POR interrupt flag */ +#define SVSHIFG_H (0x0020) /* SVS low side interrupt flag */ +#define PMMLPM5IFG_H (0x0080) /* LPM5 indication Flag */ + +/* PM5CTL0 Power Mode 5 Control Bits */ +#define LOCKLPM5 (0x0001) /* Lock I/O pin configuration upon entry/exit to/from LPM5 */ + +/* PM5CTL0 Power Mode 5 Control Bits */ +#define LOCKLPM5_L (0x0001) /* Lock I/O pin configuration upon entry/exit to/from LPM5 */ + + +/************************************************************ +* DIGITAL I/O Port1/2 Pull up / Pull down Resistors +************************************************************/ +#define __MSP430_HAS_PORT1_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT1_R__ 0x0200 +#define P1_BASE __MSP430_BASEADDRESS_PORT1_R__ +#define __MSP430_HAS_PORT2_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT2_R__ 0x0200 +#define P2_BASE __MSP430_BASEADDRESS_PORT2_R__ +#define __MSP430_HAS_PORTA_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORTA_R__ 0x0200 +#define PA_BASE __MSP430_BASEADDRESS_PORTA_R__ +#define __MSP430_HAS_P1SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P2SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_PASEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P1SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_P2SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_PASEL1__ /* Define for DriverLib */ + +sfr_w(PAIN); /* Port A Input */ +sfr_b(PAIN_L); /* Port A Input */ +sfr_b(PAIN_H); /* Port A Input */ +sfr_w(PAOUT); /* Port A Output */ +sfr_b(PAOUT_L); /* Port A Output */ +sfr_b(PAOUT_H); /* Port A Output */ +sfr_w(PADIR); /* Port A Direction */ +sfr_b(PADIR_L); /* Port A Direction */ +sfr_b(PADIR_H); /* Port A Direction */ +sfr_w(PAREN); /* Port A Resistor Enable */ +sfr_b(PAREN_L); /* Port A Resistor Enable */ +sfr_b(PAREN_H); /* Port A Resistor Enable */ +sfr_w(PASEL0); /* Port A Selection 0 */ +sfr_b(PASEL0_L); /* Port A Selection 0 */ +sfr_b(PASEL0_H); /* Port A Selection 0 */ +sfr_w(PASEL1); /* Port A Selection 1 */ +sfr_b(PASEL1_L); /* Port A Selection 1 */ +sfr_b(PASEL1_H); /* Port A Selection 1 */ +sfr_w(PASELC); /* Port A Complement Selection */ +sfr_b(PASELC_L); /* Port A Complement Selection */ +sfr_b(PASELC_H); /* Port A Complement Selection */ +sfr_w(PAIES); /* Port A Interrupt Edge Select */ +sfr_b(PAIES_L); /* Port A Interrupt Edge Select */ +sfr_b(PAIES_H); /* Port A Interrupt Edge Select */ +sfr_w(PAIE); /* Port A Interrupt Enable */ +sfr_b(PAIE_L); /* Port A Interrupt Enable */ +sfr_b(PAIE_H); /* Port A Interrupt Enable */ +sfr_w(PAIFG); /* Port A Interrupt Flag */ +sfr_b(PAIFG_L); /* Port A Interrupt Flag */ +sfr_b(PAIFG_H); /* Port A Interrupt Flag */ + + +sfr_w(P1IV); /* Port 1 Interrupt Vector Word */ +sfr_w(P2IV); /* Port 2 Interrupt Vector Word */ +#define P1IN (PAIN_L) /* Port 1 Input */ +#define P1OUT (PAOUT_L) /* Port 1 Output */ +#define P1DIR (PADIR_L) /* Port 1 Direction */ +#define P1REN (PAREN_L) /* Port 1 Resistor Enable */ +#define P1SEL0 (PASEL0_L) /* Port 1 Selection 0 */ +#define P1SEL1 (PASEL1_L) /* Port 1 Selection 1 */ +#define P1SELC (PASELC_L) /* Port 1 Complement Selection */ +#define P1IES (PAIES_L) /* Port 1 Interrupt Edge Select */ +#define P1IE (PAIE_L) /* Port 1 Interrupt Enable */ +#define P1IFG (PAIFG_L) /* Port 1 Interrupt Flag */ + +//Definitions for P1IV +#define P1IV_NONE (0x0000) /* No Interrupt pending */ +#define P1IV_P1IFG0 (0x0002) /* P1IV P1IFG.0 */ +#define P1IV_P1IFG1 (0x0004) /* P1IV P1IFG.1 */ +#define P1IV_P1IFG2 (0x0006) /* P1IV P1IFG.2 */ +#define P1IV_P1IFG3 (0x0008) /* P1IV P1IFG.3 */ +#define P1IV_P1IFG4 (0x000A) /* P1IV P1IFG.4 */ +#define P1IV_P1IFG5 (0x000C) /* P1IV P1IFG.5 */ +#define P1IV_P1IFG6 (0x000E) /* P1IV P1IFG.6 */ +#define P1IV_P1IFG7 (0x0010) /* P1IV P1IFG.7 */ + +#define P2IN (PAIN_H) /* Port 2 Input */ +#define P2OUT (PAOUT_H) /* Port 2 Output */ +#define P2DIR (PADIR_H) /* Port 2 Direction */ +#define P2REN (PAREN_H) /* Port 2 Resistor Enable */ +#define P2SEL0 (PASEL0_H) /* Port 2 Selection 0 */ +#define P2SEL1 (PASEL1_H) /* Port 2 Selection 1 */ +#define P2SELC (PASELC_H) /* Port 2 Complement Selection */ +#define P2IES (PAIES_H) /* Port 2 Interrupt Edge Select */ +#define P2IE (PAIE_H) /* Port 2 Interrupt Enable */ +#define P2IFG (PAIFG_H) /* Port 2 Interrupt Flag */ + +//Definitions for P2IV +#define P2IV_NONE (0x0000) /* No Interrupt pending */ +#define P2IV_P2IFG0 (0x0002) /* P2IV P2IFG.0 */ +#define P2IV_P2IFG1 (0x0004) /* P2IV P2IFG.1 */ +#define P2IV_P2IFG2 (0x0006) /* P2IV P2IFG.2 */ +#define P2IV_P2IFG3 (0x0008) /* P2IV P2IFG.3 */ +#define P2IV_P2IFG4 (0x000A) /* P2IV P2IFG.4 */ +#define P2IV_P2IFG5 (0x000C) /* P2IV P2IFG.5 */ +#define P2IV_P2IFG6 (0x000E) /* P2IV P2IFG.6 */ +#define P2IV_P2IFG7 (0x0010) /* P2IV P2IFG.7 */ + + +/************************************************************ +* DIGITAL I/O Port3/4 Pull up / Pull down Resistors +************************************************************/ +#define __MSP430_HAS_PORT3_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT3_R__ 0x0220 +#define P3_BASE __MSP430_BASEADDRESS_PORT3_R__ +#define __MSP430_HAS_PORT4_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT4_R__ 0x0220 +#define P4_BASE __MSP430_BASEADDRESS_PORT4_R__ +#define __MSP430_HAS_PORTB_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORTB_R__ 0x0220 +#define PB_BASE __MSP430_BASEADDRESS_PORTB_R__ +#define __MSP430_HAS_P3SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P4SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_PBSEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P3SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_P4SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_PBSEL1__ /* Define for DriverLib */ + +sfr_w(PBIN); /* Port B Input */ +sfr_b(PBIN_L); /* Port B Input */ +sfr_b(PBIN_H); /* Port B Input */ +sfr_w(PBOUT); /* Port B Output */ +sfr_b(PBOUT_L); /* Port B Output */ +sfr_b(PBOUT_H); /* Port B Output */ +sfr_w(PBDIR); /* Port B Direction */ +sfr_b(PBDIR_L); /* Port B Direction */ +sfr_b(PBDIR_H); /* Port B Direction */ +sfr_w(PBREN); /* Port B Resistor Enable */ +sfr_b(PBREN_L); /* Port B Resistor Enable */ +sfr_b(PBREN_H); /* Port B Resistor Enable */ +sfr_w(PBSEL0); /* Port B Selection 0 */ +sfr_b(PBSEL0_L); /* Port B Selection 0 */ +sfr_b(PBSEL0_H); /* Port B Selection 0 */ +sfr_w(PBSEL1); /* Port B Selection 1 */ +sfr_b(PBSEL1_L); /* Port B Selection 1 */ +sfr_b(PBSEL1_H); /* Port B Selection 1 */ +sfr_w(PBSELC); /* Port B Complement Selection */ +sfr_b(PBSELC_L); /* Port B Complement Selection */ +sfr_b(PBSELC_H); /* Port B Complement Selection */ +sfr_w(PBIES); /* Port B Interrupt Edge Select */ +sfr_b(PBIES_L); /* Port B Interrupt Edge Select */ +sfr_b(PBIES_H); /* Port B Interrupt Edge Select */ +sfr_w(PBIE); /* Port B Interrupt Enable */ +sfr_b(PBIE_L); /* Port B Interrupt Enable */ +sfr_b(PBIE_H); /* Port B Interrupt Enable */ +sfr_w(PBIFG); /* Port B Interrupt Flag */ +sfr_b(PBIFG_L); /* Port B Interrupt Flag */ +sfr_b(PBIFG_H); /* Port B Interrupt Flag */ + + +sfr_w(P3IV); /* Port 3 Interrupt Vector Word */ +sfr_w(P4IV); /* Port 4 Interrupt Vector Word */ +#define P3IN (PBIN_L) /* Port 3 Input */ +#define P3OUT (PBOUT_L) /* Port 3 Output */ +#define P3DIR (PBDIR_L) /* Port 3 Direction */ +#define P3REN (PBREN_L) /* Port 3 Resistor Enable */ +#define P3SEL0 (PBSEL0_L) /* Port 3 Selection 0 */ +#define P3SEL1 (PBSEL1_L) /* Port 3 Selection 1 */ +#define P3SELC (PBSELC_L) /* Port 3 Complement Selection */ +#define P3IES (PBIES_L) /* Port 3 Interrupt Edge Select */ +#define P3IE (PBIE_L) /* Port 3 Interrupt Enable */ +#define P3IFG (PBIFG_L) /* Port 3 Interrupt Flag */ + +//Definitions for P3IV +#define P3IV_NONE (0x0000) /* No Interrupt pending */ +#define P3IV_P3IFG0 (0x0002) /* P3IV P3IFG.0 */ +#define P3IV_P3IFG1 (0x0004) /* P3IV P3IFG.1 */ +#define P3IV_P3IFG2 (0x0006) /* P3IV P3IFG.2 */ +#define P3IV_P3IFG3 (0x0008) /* P3IV P3IFG.3 */ +#define P3IV_P3IFG4 (0x000A) /* P3IV P3IFG.4 */ +#define P3IV_P3IFG5 (0x000C) /* P3IV P3IFG.5 */ +#define P3IV_P3IFG6 (0x000E) /* P3IV P3IFG.6 */ +#define P3IV_P3IFG7 (0x0010) /* P3IV P3IFG.7 */ + +#define P4IN (PBIN_H) /* Port 4 Input */ +#define P4OUT (PBOUT_H) /* Port 4 Output */ +#define P4DIR (PBDIR_H) /* Port 4 Direction */ +#define P4REN (PBREN_H) /* Port 4 Resistor Enable */ +#define P4SEL0 (PBSEL0_H) /* Port 4 Selection 0 */ +#define P4SEL1 (PBSEL1_H) /* Port 4 Selection 1 */ +#define P4SELC (PBSELC_H) /* Port 4 Complement Selection */ +#define P4IES (PBIES_H) /* Port 4 Interrupt Edge Select */ +#define P4IE (PBIE_H) /* Port 4 Interrupt Enable */ +#define P4IFG (PBIFG_H) /* Port 4 Interrupt Flag */ + +//Definitions for P4IV +#define P4IV_NONE (0x0000) /* No Interrupt pending */ +#define P4IV_P4IFG0 (0x0002) /* P4IV P4IFG.0 */ +#define P4IV_P4IFG1 (0x0004) /* P4IV P4IFG.1 */ +#define P4IV_P4IFG2 (0x0006) /* P4IV P4IFG.2 */ +#define P4IV_P4IFG3 (0x0008) /* P4IV P4IFG.3 */ +#define P4IV_P4IFG4 (0x000A) /* P4IV P4IFG.4 */ +#define P4IV_P4IFG5 (0x000C) /* P4IV P4IFG.5 */ +#define P4IV_P4IFG6 (0x000E) /* P4IV P4IFG.6 */ +#define P4IV_P4IFG7 (0x0010) /* P4IV P4IFG.7 */ + + +/************************************************************ +* DIGITAL I/O PortJ Pull up / Pull down Resistors +************************************************************/ +#define __MSP430_HAS_PORTJ_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORTJ_R__ 0x0320 +#define PJ_BASE __MSP430_BASEADDRESS_PORTJ_R__ +#define __MSP430_HAS_PJSEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_PJSEL1__ /* Define for DriverLib */ + +sfr_w(PJIN); /* Port J Input */ +sfr_b(PJIN_L); /* Port J Input */ +sfr_b(PJIN_H); /* Port J Input */ +sfr_w(PJOUT); /* Port J Output */ +sfr_b(PJOUT_L); /* Port J Output */ +sfr_b(PJOUT_H); /* Port J Output */ +sfr_w(PJDIR); /* Port J Direction */ +sfr_b(PJDIR_L); /* Port J Direction */ +sfr_b(PJDIR_H); /* Port J Direction */ +sfr_w(PJREN); /* Port J Resistor Enable */ +sfr_b(PJREN_L); /* Port J Resistor Enable */ +sfr_b(PJREN_H); /* Port J Resistor Enable */ +sfr_w(PJSEL0); /* Port J Selection 0 */ +sfr_b(PJSEL0_L); /* Port J Selection 0 */ +sfr_b(PJSEL0_H); /* Port J Selection 0 */ +sfr_w(PJSEL1); /* Port J Selection 1 */ +sfr_b(PJSEL1_L); /* Port J Selection 1 */ +sfr_b(PJSEL1_H); /* Port J Selection 1 */ +sfr_w(PJSELC); /* Port J Complement Selection */ +sfr_b(PJSELC_L); /* Port J Complement Selection */ +sfr_b(PJSELC_H); /* Port J Complement Selection */ + +/************************************************************ +* Shared Reference +************************************************************/ +#define __MSP430_HAS_REF_A__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_REF_A__ 0x01B0 +#define REF_A_BASE __MSP430_BASEADDRESS_REF_A__ + +sfr_w(REFCTL0); /* REF Shared Reference control register 0 */ +sfr_b(REFCTL0_L); /* REF Shared Reference control register 0 */ +sfr_b(REFCTL0_H); /* REF Shared Reference control register 0 */ + +/* REFCTL0 Control Bits */ +#define REFON (0x0001) /* REF Reference On */ +#define REFOUT (0x0002) /* REF Reference output Buffer On */ +//#define RESERVED (0x0004) /* Reserved */ +#define REFTCOFF (0x0008) /* REF Temp.Sensor off */ +#define REFVSEL0 (0x0010) /* REF Reference Voltage Level Select Bit:0 */ +#define REFVSEL1 (0x0020) /* REF Reference Voltage Level Select Bit:1 */ +#define REFGENOT (0x0040) /* REF Reference generator one-time trigger */ +#define REFBGOT (0x0080) /* REF Bandgap and bandgap buffer one-time trigger */ +#define REFGENACT (0x0100) /* REF Reference generator active */ +#define REFBGACT (0x0200) /* REF Reference bandgap active */ +#define REFGENBUSY (0x0400) /* REF Reference generator busy */ +#define BGMODE (0x0800) /* REF Bandgap mode */ +#define REFGENRDY (0x1000) /* REF Reference generator ready */ +#define REFBGRDY (0x2000) /* REF Reference bandgap ready */ +//#define RESERVED (0x4000) /* Reserved */ +//#define RESERVED (0x8000) /* Reserved */ + +/* REFCTL0 Control Bits */ +#define REFON_L (0x0001) /* REF Reference On */ +#define REFOUT_L (0x0002) /* REF Reference output Buffer On */ +//#define RESERVED (0x0004) /* Reserved */ +#define REFTCOFF_L (0x0008) /* REF Temp.Sensor off */ +#define REFVSEL0_L (0x0010) /* REF Reference Voltage Level Select Bit:0 */ +#define REFVSEL1_L (0x0020) /* REF Reference Voltage Level Select Bit:1 */ +#define REFGENOT_L (0x0040) /* REF Reference generator one-time trigger */ +#define REFBGOT_L (0x0080) /* REF Bandgap and bandgap buffer one-time trigger */ +//#define RESERVED (0x4000) /* Reserved */ +//#define RESERVED (0x8000) /* Reserved */ + +/* REFCTL0 Control Bits */ +//#define RESERVED (0x0004) /* Reserved */ +#define REFGENACT_H (0x0001) /* REF Reference generator active */ +#define REFBGACT_H (0x0002) /* REF Reference bandgap active */ +#define REFGENBUSY_H (0x0004) /* REF Reference generator busy */ +#define BGMODE_H (0x0008) /* REF Bandgap mode */ +#define REFGENRDY_H (0x0010) /* REF Reference generator ready */ +#define REFBGRDY_H (0x0020) /* REF Reference bandgap ready */ +//#define RESERVED (0x4000) /* Reserved */ +//#define RESERVED (0x8000) /* Reserved */ + +#define REFVSEL_0 (0x0000) /* REF Reference Voltage Level Select 1.2V */ +#define REFVSEL_1 (0x0010) /* REF Reference Voltage Level Select 2.0V */ +#define REFVSEL_2 (0x0020) /* REF Reference Voltage Level Select 2.5V */ +#define REFVSEL_3 (0x0030) /* REF Reference Voltage Level Select 2.5V */ + +/************************************************************ +* Real Time Clock +************************************************************/ +#define __MSP430_HAS_RTC_B__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_RTC_B__ 0x04A0 +#define RTC_B_BASE __MSP430_BASEADDRESS_RTC_B__ + +sfr_w(RTCCTL01); /* Real Timer Control 0/1 */ +sfr_b(RTCCTL01_L); /* Real Timer Control 0/1 */ +sfr_b(RTCCTL01_H); /* Real Timer Control 0/1 */ +sfr_w(RTCCTL23); /* Real Timer Control 2/3 */ +sfr_b(RTCCTL23_L); /* Real Timer Control 2/3 */ +sfr_b(RTCCTL23_H); /* Real Timer Control 2/3 */ +sfr_w(RTCPS0CTL); /* Real Timer Prescale Timer 0 Control */ +sfr_b(RTCPS0CTL_L); /* Real Timer Prescale Timer 0 Control */ +sfr_b(RTCPS0CTL_H); /* Real Timer Prescale Timer 0 Control */ +sfr_w(RTCPS1CTL); /* Real Timer Prescale Timer 1 Control */ +sfr_b(RTCPS1CTL_L); /* Real Timer Prescale Timer 1 Control */ +sfr_b(RTCPS1CTL_H); /* Real Timer Prescale Timer 1 Control */ +sfr_w(RTCPS); /* Real Timer Prescale Timer Control */ +sfr_b(RTCPS_L); /* Real Timer Prescale Timer Control */ +sfr_b(RTCPS_H); /* Real Timer Prescale Timer Control */ +sfr_w(RTCIV); /* Real Time Clock Interrupt Vector */ +sfr_w(RTCTIM0); /* Real Time Clock Time 0 */ +sfr_b(RTCTIM0_L); /* Real Time Clock Time 0 */ +sfr_b(RTCTIM0_H); /* Real Time Clock Time 0 */ +sfr_w(RTCTIM1); /* Real Time Clock Time 1 */ +sfr_b(RTCTIM1_L); /* Real Time Clock Time 1 */ +sfr_b(RTCTIM1_H); /* Real Time Clock Time 1 */ +sfr_w(RTCDATE); /* Real Time Clock Date */ +sfr_b(RTCDATE_L); /* Real Time Clock Date */ +sfr_b(RTCDATE_H); /* Real Time Clock Date */ +sfr_w(RTCYEAR); /* Real Time Clock Year */ +sfr_b(RTCYEAR_L); /* Real Time Clock Year */ +sfr_b(RTCYEAR_H); /* Real Time Clock Year */ +sfr_w(RTCAMINHR); /* Real Time Clock Alarm Min/Hour */ +sfr_b(RTCAMINHR_L); /* Real Time Clock Alarm Min/Hour */ +sfr_b(RTCAMINHR_H); /* Real Time Clock Alarm Min/Hour */ +sfr_w(RTCADOWDAY); /* Real Time Clock Alarm day of week/day */ +sfr_b(RTCADOWDAY_L); /* Real Time Clock Alarm day of week/day */ +sfr_b(RTCADOWDAY_H); /* Real Time Clock Alarm day of week/day */ +sfr_w(BIN2BCD); /* Real Time Binary-to-BCD conversion register */ +sfr_w(BCD2BIN); /* Real Time BCD-to-binary conversion register */ + +#define RTCCTL0 RTCCTL01_L /* Real Time Clock Control 0 */ +#define RTCCTL1 RTCCTL01_H /* Real Time Clock Control 1 */ +#define RTCCTL2 RTCCTL23_L /* Real Time Clock Control 2 */ +#define RTCCTL3 RTCCTL23_H /* Real Time Clock Control 3 */ +#define RTCNT12 RTCTIM0 +#define RTCNT34 RTCTIM1 +#define RTCNT1 RTCTIM0_L +#define RTCNT2 RTCTIM0_H +#define RTCNT3 RTCTIM1_L +#define RTCNT4 RTCTIM1_H +#define RTCSEC RTCTIM0_L +#define RTCMIN RTCTIM0_H +#define RTCHOUR RTCTIM1_L +#define RTCDOW RTCTIM1_H +#define RTCDAY RTCDATE_L +#define RTCMON RTCDATE_H +#define RTCYEARL RTCYEAR_L +#define RTCYEARH RTCYEAR_H +#define RT0PS RTCPS_L +#define RT1PS RTCPS_H +#define RTCAMIN RTCAMINHR_L /* Real Time Clock Alarm Min */ +#define RTCAHOUR RTCAMINHR_H /* Real Time Clock Alarm Hour */ +#define RTCADOW RTCADOWDAY_L /* Real Time Clock Alarm day of week */ +#define RTCADAY RTCADOWDAY_H /* Real Time Clock Alarm day */ + +/* RTCCTL01 Control Bits */ +#define RTCBCD (0x8000) /* RTC BCD 0:Binary / 1:BCD */ +#define RTCHOLD (0x4000) /* RTC Hold */ +//#define RESERVED (0x2000) /* RESERVED */ +#define RTCRDY (0x1000) /* RTC Ready */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x0400) /* RESERVED */ +#define RTCTEV1 (0x0200) /* RTC Time Event 1 */ +#define RTCTEV0 (0x0100) /* RTC Time Event 0 */ +#define RTCOFIE (0x0080) /* RTC 32kHz cyrstal oscillator fault interrupt enable */ +#define RTCTEVIE (0x0040) /* RTC Time Event Interrupt Enable Flag */ +#define RTCAIE (0x0020) /* RTC Alarm Interrupt Enable Flag */ +#define RTCRDYIE (0x0010) /* RTC Ready Interrupt Enable Flag */ +#define RTCOFIFG (0x0008) /* RTC 32kHz cyrstal oscillator fault interrupt flag */ +#define RTCTEVIFG (0x0004) /* RTC Time Event Interrupt Flag */ +#define RTCAIFG (0x0002) /* RTC Alarm Interrupt Flag */ +#define RTCRDYIFG (0x0001) /* RTC Ready Interrupt Flag */ + +/* RTCCTL01 Control Bits */ +//#define RESERVED (0x2000) /* RESERVED */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x0400) /* RESERVED */ +#define RTCOFIE_L (0x0080) /* RTC 32kHz cyrstal oscillator fault interrupt enable */ +#define RTCTEVIE_L (0x0040) /* RTC Time Event Interrupt Enable Flag */ +#define RTCAIE_L (0x0020) /* RTC Alarm Interrupt Enable Flag */ +#define RTCRDYIE_L (0x0010) /* RTC Ready Interrupt Enable Flag */ +#define RTCOFIFG_L (0x0008) /* RTC 32kHz cyrstal oscillator fault interrupt flag */ +#define RTCTEVIFG_L (0x0004) /* RTC Time Event Interrupt Flag */ +#define RTCAIFG_L (0x0002) /* RTC Alarm Interrupt Flag */ +#define RTCRDYIFG_L (0x0001) /* RTC Ready Interrupt Flag */ + +/* RTCCTL01 Control Bits */ +#define RTCBCD_H (0x0080) /* RTC BCD 0:Binary / 1:BCD */ +#define RTCHOLD_H (0x0040) /* RTC Hold */ +//#define RESERVED (0x2000) /* RESERVED */ +#define RTCRDY_H (0x0010) /* RTC Ready */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x0400) /* RESERVED */ +#define RTCTEV1_H (0x0002) /* RTC Time Event 1 */ +#define RTCTEV0_H (0x0001) /* RTC Time Event 0 */ + +#define RTCTEV_0 (0x0000) /* RTC Time Event: 0 (Min. changed) */ +#define RTCTEV_1 (0x0100) /* RTC Time Event: 1 (Hour changed) */ +#define RTCTEV_2 (0x0200) /* RTC Time Event: 2 (12:00 changed) */ +#define RTCTEV_3 (0x0300) /* RTC Time Event: 3 (00:00 changed) */ +#define RTCTEV__MIN (0x0000) /* RTC Time Event: 0 (Min. changed) */ +#define RTCTEV__HOUR (0x0100) /* RTC Time Event: 1 (Hour changed) */ +#define RTCTEV__0000 (0x0200) /* RTC Time Event: 2 (00:00 changed) */ +#define RTCTEV__1200 (0x0300) /* RTC Time Event: 3 (12:00 changed) */ + +/* RTCCTL23 Control Bits */ +#define RTCCALF1 (0x0200) /* RTC Calibration Frequency Bit 1 */ +#define RTCCALF0 (0x0100) /* RTC Calibration Frequency Bit 0 */ +#define RTCCALS (0x0080) /* RTC Calibration Sign */ +//#define Reserved (0x0040) +#define RTCCAL5 (0x0020) /* RTC Calibration Bit 5 */ +#define RTCCAL4 (0x0010) /* RTC Calibration Bit 4 */ +#define RTCCAL3 (0x0008) /* RTC Calibration Bit 3 */ +#define RTCCAL2 (0x0004) /* RTC Calibration Bit 2 */ +#define RTCCAL1 (0x0002) /* RTC Calibration Bit 1 */ +#define RTCCAL0 (0x0001) /* RTC Calibration Bit 0 */ + +/* RTCCTL23 Control Bits */ +#define RTCCALS_L (0x0080) /* RTC Calibration Sign */ +//#define Reserved (0x0040) +#define RTCCAL5_L (0x0020) /* RTC Calibration Bit 5 */ +#define RTCCAL4_L (0x0010) /* RTC Calibration Bit 4 */ +#define RTCCAL3_L (0x0008) /* RTC Calibration Bit 3 */ +#define RTCCAL2_L (0x0004) /* RTC Calibration Bit 2 */ +#define RTCCAL1_L (0x0002) /* RTC Calibration Bit 1 */ +#define RTCCAL0_L (0x0001) /* RTC Calibration Bit 0 */ + +/* RTCCTL23 Control Bits */ +#define RTCCALF1_H (0x0002) /* RTC Calibration Frequency Bit 1 */ +#define RTCCALF0_H (0x0001) /* RTC Calibration Frequency Bit 0 */ +//#define Reserved (0x0040) + +#define RTCCALF_0 (0x0000) /* RTC Calibration Frequency: No Output */ +#define RTCCALF_1 (0x0100) /* RTC Calibration Frequency: 512 Hz */ +#define RTCCALF_2 (0x0200) /* RTC Calibration Frequency: 256 Hz */ +#define RTCCALF_3 (0x0300) /* RTC Calibration Frequency: 1 Hz */ + +#define RTCAE (0x80) /* Real Time Clock Alarm enable */ + +/* RTCPS0CTL Control Bits */ +//#define Reserved (0x0080) +//#define Reserved (0x0040) +//#define Reserved (0x0020) +#define RT0IP2 (0x0010) /* RTC Prescale Timer 0 Interrupt Interval Bit: 2 */ +#define RT0IP1 (0x0008) /* RTC Prescale Timer 0 Interrupt Interval Bit: 1 */ +#define RT0IP0 (0x0004) /* RTC Prescale Timer 0 Interrupt Interval Bit: 0 */ +#define RT0PSIE (0x0002) /* RTC Prescale Timer 0 Interrupt Enable Flag */ +#define RT0PSIFG (0x0001) /* RTC Prescale Timer 0 Interrupt Flag */ + +/* RTCPS0CTL Control Bits */ +//#define Reserved (0x0080) +//#define Reserved (0x0040) +//#define Reserved (0x0020) +#define RT0IP2_L (0x0010) /* RTC Prescale Timer 0 Interrupt Interval Bit: 2 */ +#define RT0IP1_L (0x0008) /* RTC Prescale Timer 0 Interrupt Interval Bit: 1 */ +#define RT0IP0_L (0x0004) /* RTC Prescale Timer 0 Interrupt Interval Bit: 0 */ +#define RT0PSIE_L (0x0002) /* RTC Prescale Timer 0 Interrupt Enable Flag */ +#define RT0PSIFG_L (0x0001) /* RTC Prescale Timer 0 Interrupt Flag */ + +#define RT0IP_0 (0x0000) /* RTC Prescale Timer 0 Interrupt Interval /2 */ +#define RT0IP_1 (0x0004) /* RTC Prescale Timer 0 Interrupt Interval /4 */ +#define RT0IP_2 (0x0008) /* RTC Prescale Timer 0 Interrupt Interval /8 */ +#define RT0IP_3 (0x000C) /* RTC Prescale Timer 0 Interrupt Interval /16 */ +#define RT0IP_4 (0x0010) /* RTC Prescale Timer 0 Interrupt Interval /32 */ +#define RT0IP_5 (0x0014) /* RTC Prescale Timer 0 Interrupt Interval /64 */ +#define RT0IP_6 (0x0018) /* RTC Prescale Timer 0 Interrupt Interval /128 */ +#define RT0IP_7 (0x001C) /* RTC Prescale Timer 0 Interrupt Interval /256 */ + +#define RT0IP__2 (0x0000) /* RTC Prescale Timer 0 Interrupt Interval /2 */ +#define RT0IP__4 (0x0004) /* RTC Prescale Timer 0 Interrupt Interval /4 */ +#define RT0IP__8 (0x0008) /* RTC Prescale Timer 0 Interrupt Interval /8 */ +#define RT0IP__16 (0x000C) /* RTC Prescale Timer 0 Interrupt Interval /16 */ +#define RT0IP__32 (0x0010) /* RTC Prescale Timer 0 Interrupt Interval /32 */ +#define RT0IP__64 (0x0014) /* RTC Prescale Timer 0 Interrupt Interval /64 */ +#define RT0IP__128 (0x0018) /* RTC Prescale Timer 0 Interrupt Interval /128 */ +#define RT0IP__256 (0x001C) /* RTC Prescale Timer 0 Interrupt Interval /256 */ + +/* RTCPS1CTL Control Bits */ +//#define Reserved (0x0080) +//#define Reserved (0x0040) +//#define Reserved (0x0020) +#define RT1IP2 (0x0010) /* RTC Prescale Timer 1 Interrupt Interval Bit: 2 */ +#define RT1IP1 (0x0008) /* RTC Prescale Timer 1 Interrupt Interval Bit: 1 */ +#define RT1IP0 (0x0004) /* RTC Prescale Timer 1 Interrupt Interval Bit: 0 */ +#define RT1PSIE (0x0002) /* RTC Prescale Timer 1 Interrupt Enable Flag */ +#define RT1PSIFG (0x0001) /* RTC Prescale Timer 1 Interrupt Flag */ + +/* RTCPS1CTL Control Bits */ +//#define Reserved (0x0080) +//#define Reserved (0x0040) +//#define Reserved (0x0020) +#define RT1IP2_L (0x0010) /* RTC Prescale Timer 1 Interrupt Interval Bit: 2 */ +#define RT1IP1_L (0x0008) /* RTC Prescale Timer 1 Interrupt Interval Bit: 1 */ +#define RT1IP0_L (0x0004) /* RTC Prescale Timer 1 Interrupt Interval Bit: 0 */ +#define RT1PSIE_L (0x0002) /* RTC Prescale Timer 1 Interrupt Enable Flag */ +#define RT1PSIFG_L (0x0001) /* RTC Prescale Timer 1 Interrupt Flag */ + +#define RT1IP_0 (0x0000) /* RTC Prescale Timer 1 Interrupt Interval /2 */ +#define RT1IP_1 (0x0004) /* RTC Prescale Timer 1 Interrupt Interval /4 */ +#define RT1IP_2 (0x0008) /* RTC Prescale Timer 1 Interrupt Interval /8 */ +#define RT1IP_3 (0x000C) /* RTC Prescale Timer 1 Interrupt Interval /16 */ +#define RT1IP_4 (0x0010) /* RTC Prescale Timer 1 Interrupt Interval /32 */ +#define RT1IP_5 (0x0014) /* RTC Prescale Timer 1 Interrupt Interval /64 */ +#define RT1IP_6 (0x0018) /* RTC Prescale Timer 1 Interrupt Interval /128 */ +#define RT1IP_7 (0x001C) /* RTC Prescale Timer 1 Interrupt Interval /256 */ + +#define RT1IP__2 (0x0000) /* RTC Prescale Timer 1 Interrupt Interval /2 */ +#define RT1IP__4 (0x0004) /* RTC Prescale Timer 1 Interrupt Interval /4 */ +#define RT1IP__8 (0x0008) /* RTC Prescale Timer 1 Interrupt Interval /8 */ +#define RT1IP__16 (0x000C) /* RTC Prescale Timer 1 Interrupt Interval /16 */ +#define RT1IP__32 (0x0010) /* RTC Prescale Timer 1 Interrupt Interval /32 */ +#define RT1IP__64 (0x0014) /* RTC Prescale Timer 1 Interrupt Interval /64 */ +#define RT1IP__128 (0x0018) /* RTC Prescale Timer 1 Interrupt Interval /128 */ +#define RT1IP__256 (0x001C) /* RTC Prescale Timer 1 Interrupt Interval /256 */ + +/* RTC Definitions */ +#define RTCIV_NONE (0x0000) /* No Interrupt pending */ +#define RTCIV_RTCRDYIFG (0x0002) /* RTC ready: RTCRDYIFG */ +#define RTCIV_RTCTEVIFG (0x0004) /* RTC interval timer: RTCTEVIFG */ +#define RTCIV_RTCAIFG (0x0006) /* RTC user alarm: RTCAIFG */ +#define RTCIV_RT0PSIFG (0x0008) /* RTC prescaler 0: RT0PSIFG */ +#define RTCIV_RT1PSIFG (0x000A) /* RTC prescaler 1: RT1PSIFG */ +#define RTCIV_RTCOFIFG (0x000C) /* RTC Oscillator fault */ + +/* Legacy Definitions */ +#define RTC_NONE (0x0000) /* No Interrupt pending */ +#define RTC_RTCRDYIFG (0x0002) /* RTC ready: RTCRDYIFG */ +#define RTC_RTCTEVIFG (0x0004) /* RTC interval timer: RTCTEVIFG */ +#define RTC_RTCAIFG (0x0006) /* RTC user alarm: RTCAIFG */ +#define RTC_RT0PSIFG (0x0008) /* RTC prescaler 0: RT0PSIFG */ +#define RTC_RT1PSIFG (0x000A) /* RTC prescaler 1: RT1PSIFG */ +#define RTC_RTCOFIFG (0x000C) /* RTC Oscillator fault */ + +/************************************************************ +* SFR - Special Function Register Module +************************************************************/ +#define __MSP430_HAS_SFR__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_SFR__ 0x0100 +#define SFR_BASE __MSP430_BASEADDRESS_SFR__ + +sfr_w(SFRIE1); /* Interrupt Enable 1 */ +sfr_b(SFRIE1_L); /* Interrupt Enable 1 */ +sfr_b(SFRIE1_H); /* Interrupt Enable 1 */ + +/* SFRIE1 Control Bits */ +#define WDTIE (0x0001) /* WDT Interrupt Enable */ +#define OFIE (0x0002) /* Osc Fault Enable */ +//#define Reserved (0x0004) +#define VMAIE (0x0008) /* Vacant Memory Interrupt Enable */ +#define NMIIE (0x0010) /* NMI Interrupt Enable */ +#define JMBINIE (0x0040) /* JTAG Mail Box input Interrupt Enable */ +#define JMBOUTIE (0x0080) /* JTAG Mail Box output Interrupt Enable */ + +#define WDTIE_L (0x0001) /* WDT Interrupt Enable */ +#define OFIE_L (0x0002) /* Osc Fault Enable */ +//#define Reserved (0x0004) +#define VMAIE_L (0x0008) /* Vacant Memory Interrupt Enable */ +#define NMIIE_L (0x0010) /* NMI Interrupt Enable */ +#define JMBINIE_L (0x0040) /* JTAG Mail Box input Interrupt Enable */ +#define JMBOUTIE_L (0x0080) /* JTAG Mail Box output Interrupt Enable */ + +sfr_w(SFRIFG1); /* Interrupt Flag 1 */ +sfr_b(SFRIFG1_L); /* Interrupt Flag 1 */ +sfr_b(SFRIFG1_H); /* Interrupt Flag 1 */ +/* SFRIFG1 Control Bits */ +#define WDTIFG (0x0001) /* WDT Interrupt Flag */ +#define OFIFG (0x0002) /* Osc Fault Flag */ +//#define Reserved (0x0004) +#define VMAIFG (0x0008) /* Vacant Memory Interrupt Flag */ +#define NMIIFG (0x0010) /* NMI Interrupt Flag */ +//#define Reserved (0x0020) +#define JMBINIFG (0x0040) /* JTAG Mail Box input Interrupt Flag */ +#define JMBOUTIFG (0x0080) /* JTAG Mail Box output Interrupt Flag */ + +#define WDTIFG_L (0x0001) /* WDT Interrupt Flag */ +#define OFIFG_L (0x0002) /* Osc Fault Flag */ +//#define Reserved (0x0004) +#define VMAIFG_L (0x0008) /* Vacant Memory Interrupt Flag */ +#define NMIIFG_L (0x0010) /* NMI Interrupt Flag */ +//#define Reserved (0x0020) +#define JMBINIFG_L (0x0040) /* JTAG Mail Box input Interrupt Flag */ +#define JMBOUTIFG_L (0x0080) /* JTAG Mail Box output Interrupt Flag */ + +sfr_w(SFRRPCR); /* RESET Pin Control Register */ +sfr_b(SFRRPCR_L); /* RESET Pin Control Register */ +sfr_b(SFRRPCR_H); /* RESET Pin Control Register */ +/* SFRRPCR Control Bits */ +#define SYSNMI (0x0001) /* NMI select */ +#define SYSNMIIES (0x0002) /* NMI edge select */ +#define SYSRSTUP (0x0004) /* RESET Pin pull down/up select */ +#define SYSRSTRE (0x0008) /* RESET Pin Resistor enable */ + +#define SYSNMI_L (0x0001) /* NMI select */ +#define SYSNMIIES_L (0x0002) /* NMI edge select */ +#define SYSRSTUP_L (0x0004) /* RESET Pin pull down/up select */ +#define SYSRSTRE_L (0x0008) /* RESET Pin Resistor enable */ + +/************************************************************ +* SYS - System Module +************************************************************/ +#define __MSP430_HAS_SYS__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_SYS__ 0x0180 +#define SYS_BASE __MSP430_BASEADDRESS_SYS__ + +sfr_w(SYSCTL); /* System control */ +sfr_b(SYSCTL_L); /* System control */ +sfr_b(SYSCTL_H); /* System control */ +sfr_w(SYSJMBC); /* JTAG mailbox control */ +sfr_b(SYSJMBC_L); /* JTAG mailbox control */ +sfr_b(SYSJMBC_H); /* JTAG mailbox control */ +sfr_w(SYSJMBI0); /* JTAG mailbox input 0 */ +sfr_b(SYSJMBI0_L); /* JTAG mailbox input 0 */ +sfr_b(SYSJMBI0_H); /* JTAG mailbox input 0 */ +sfr_w(SYSJMBI1); /* JTAG mailbox input 1 */ +sfr_b(SYSJMBI1_L); /* JTAG mailbox input 1 */ +sfr_b(SYSJMBI1_H); /* JTAG mailbox input 1 */ +sfr_w(SYSJMBO0); /* JTAG mailbox output 0 */ +sfr_b(SYSJMBO0_L); /* JTAG mailbox output 0 */ +sfr_b(SYSJMBO0_H); /* JTAG mailbox output 0 */ +sfr_w(SYSJMBO1); /* JTAG mailbox output 1 */ +sfr_b(SYSJMBO1_L); /* JTAG mailbox output 1 */ +sfr_b(SYSJMBO1_H); /* JTAG mailbox output 1 */ + +sfr_w(SYSUNIV); /* User NMI vector generator */ +sfr_b(SYSUNIV_L); /* User NMI vector generator */ +sfr_b(SYSUNIV_H); /* User NMI vector generator */ +sfr_w(SYSSNIV); /* System NMI vector generator */ +sfr_b(SYSSNIV_L); /* System NMI vector generator */ +sfr_b(SYSSNIV_H); /* System NMI vector generator */ +sfr_w(SYSRSTIV); /* Reset vector generator */ +sfr_b(SYSRSTIV_L); /* Reset vector generator */ +sfr_b(SYSRSTIV_H); /* Reset vector generator */ + +/* SYSCTL Control Bits */ +#define SYSRIVECT (0x0001) /* SYS - RAM based interrupt vectors */ +//#define RESERVED (0x0002) /* SYS - Reserved */ +#define SYSPMMPE (0x0004) /* SYS - PMM access protect */ +//#define RESERVED (0x0008) /* SYS - Reserved */ +#define SYSBSLIND (0x0010) /* SYS - TCK/RST indication detected */ +#define SYSJTAGPIN (0x0020) /* SYS - Dedicated JTAG pins enabled */ +//#define RESERVED (0x0040) /* SYS - Reserved */ +//#define RESERVED (0x0080) /* SYS - Reserved */ +//#define RESERVED (0x0100) /* SYS - Reserved */ +//#define RESERVED (0x0200) /* SYS - Reserved */ +//#define RESERVED (0x0400) /* SYS - Reserved */ +//#define RESERVED (0x0800) /* SYS - Reserved */ +//#define RESERVED (0x1000) /* SYS - Reserved */ +//#define RESERVED (0x2000) /* SYS - Reserved */ +//#define RESERVED (0x4000) /* SYS - Reserved */ +//#define RESERVED (0x8000) /* SYS - Reserved */ + +/* SYSCTL Control Bits */ +#define SYSRIVECT_L (0x0001) /* SYS - RAM based interrupt vectors */ +//#define RESERVED (0x0002) /* SYS - Reserved */ +#define SYSPMMPE_L (0x0004) /* SYS - PMM access protect */ +//#define RESERVED (0x0008) /* SYS - Reserved */ +#define SYSBSLIND_L (0x0010) /* SYS - TCK/RST indication detected */ +#define SYSJTAGPIN_L (0x0020) /* SYS - Dedicated JTAG pins enabled */ +//#define RESERVED (0x0040) /* SYS - Reserved */ +//#define RESERVED (0x0080) /* SYS - Reserved */ +//#define RESERVED (0x0100) /* SYS - Reserved */ +//#define RESERVED (0x0200) /* SYS - Reserved */ +//#define RESERVED (0x0400) /* SYS - Reserved */ +//#define RESERVED (0x0800) /* SYS - Reserved */ +//#define RESERVED (0x1000) /* SYS - Reserved */ +//#define RESERVED (0x2000) /* SYS - Reserved */ +//#define RESERVED (0x4000) /* SYS - Reserved */ +//#define RESERVED (0x8000) /* SYS - Reserved */ + +/* SYSJMBC Control Bits */ +#define JMBIN0FG (0x0001) /* SYS - Incoming JTAG Mailbox 0 Flag */ +#define JMBIN1FG (0x0002) /* SYS - Incoming JTAG Mailbox 1 Flag */ +#define JMBOUT0FG (0x0004) /* SYS - Outgoing JTAG Mailbox 0 Flag */ +#define JMBOUT1FG (0x0008) /* SYS - Outgoing JTAG Mailbox 1 Flag */ +#define JMBMODE (0x0010) /* SYS - JMB 16/32 Bit Mode */ +//#define RESERVED (0x0020) /* SYS - Reserved */ +#define JMBCLR0OFF (0x0040) /* SYS - Incoming JTAG Mailbox 0 Flag auto-clear disalbe */ +#define JMBCLR1OFF (0x0080) /* SYS - Incoming JTAG Mailbox 1 Flag auto-clear disalbe */ +//#define RESERVED (0x0100) /* SYS - Reserved */ +//#define RESERVED (0x0200) /* SYS - Reserved */ +//#define RESERVED (0x0400) /* SYS - Reserved */ +//#define RESERVED (0x0800) /* SYS - Reserved */ +//#define RESERVED (0x1000) /* SYS - Reserved */ +//#define RESERVED (0x2000) /* SYS - Reserved */ +//#define RESERVED (0x4000) /* SYS - Reserved */ +//#define RESERVED (0x8000) /* SYS - Reserved */ + +/* SYSJMBC Control Bits */ +#define JMBIN0FG_L (0x0001) /* SYS - Incoming JTAG Mailbox 0 Flag */ +#define JMBIN1FG_L (0x0002) /* SYS - Incoming JTAG Mailbox 1 Flag */ +#define JMBOUT0FG_L (0x0004) /* SYS - Outgoing JTAG Mailbox 0 Flag */ +#define JMBOUT1FG_L (0x0008) /* SYS - Outgoing JTAG Mailbox 1 Flag */ +#define JMBMODE_L (0x0010) /* SYS - JMB 16/32 Bit Mode */ +//#define RESERVED (0x0020) /* SYS - Reserved */ +#define JMBCLR0OFF_L (0x0040) /* SYS - Incoming JTAG Mailbox 0 Flag auto-clear disalbe */ +#define JMBCLR1OFF_L (0x0080) /* SYS - Incoming JTAG Mailbox 1 Flag auto-clear disalbe */ +//#define RESERVED (0x0100) /* SYS - Reserved */ +//#define RESERVED (0x0200) /* SYS - Reserved */ +//#define RESERVED (0x0400) /* SYS - Reserved */ +//#define RESERVED (0x0800) /* SYS - Reserved */ +//#define RESERVED (0x1000) /* SYS - Reserved */ +//#define RESERVED (0x2000) /* SYS - Reserved */ +//#define RESERVED (0x4000) /* SYS - Reserved */ +//#define RESERVED (0x8000) /* SYS - Reserved */ + + +/* SYSUNIV Definitions */ +#define SYSUNIV_NONE (0x0000) /* No Interrupt pending */ +#define SYSUNIV_NMIIFG (0x0002) /* SYSUNIV : NMIIFG */ +#define SYSUNIV_OFIFG (0x0004) /* SYSUNIV : Osc. Fail - OFIFG */ + +/* SYSSNIV Definitions */ +#define SYSSNIV_NONE (0x0000) /* No Interrupt pending */ +#define SYSSNIV_RES02 (0x0002) /* SYSSNIV : Reserved */ +#define SYSSNIV_UBDIFG (0x0004) /* SYSSNIV : FRAM Uncorrectable bit Error */ +#define SYSSNIV_RES06 (0x0006) /* SYSSNIV : Reserved */ +#define SYSSNIV_MPUSEGPIFG (0x0008) /* SYSSNIV : MPUSEGPIFG violation */ +#define SYSSNIV_MPUSEGIIFG (0x000A) /* SYSSNIV : MPUSEGIIFG violation */ +#define SYSSNIV_MPUSEG1IFG (0x000C) /* SYSSNIV : MPUSEG1IFG violation */ +#define SYSSNIV_MPUSEG2IFG (0x000E) /* SYSSNIV : MPUSEG2IFG violation */ +#define SYSSNIV_MPUSEG3IFG (0x0010) /* SYSSNIV : MPUSEG3IFG violation */ +#define SYSSNIV_VMAIFG (0x0012) /* SYSSNIV : VMAIFG */ +#define SYSSNIV_JMBINIFG (0x0014) /* SYSSNIV : JMBINIFG */ +#define SYSSNIV_JMBOUTIFG (0x0016) /* SYSSNIV : JMBOUTIFG */ +#define SYSSNIV_CBDIFG (0x0018) /* SYSSNIV : FRAM Correctable Bit error */ + +/* SYSRSTIV Definitions */ +#define SYSRSTIV_NONE (0x0000) /* No Interrupt pending */ +#define SYSRSTIV_BOR (0x0002) /* SYSRSTIV : BOR */ +#define SYSRSTIV_RSTNMI (0x0004) /* SYSRSTIV : RST/NMI */ +#define SYSRSTIV_DOBOR (0x0006) /* SYSRSTIV : Do BOR */ +#define SYSRSTIV_LPM5WU (0x0008) /* SYSRSTIV : Port LPM5 Wake Up */ +#define SYSRSTIV_SECYV (0x000A) /* SYSRSTIV : Security violation */ +#define SYSRSTIV_RES0C (0x000C) /* SYSRSTIV : Reserved */ +#define SYSRSTIV_SVSHIFG (0x000E) /* SYSRSTIV : SVSHIFG */ +#define SYSRSTIV_RES10 (0x0010) /* SYSRSTIV : Reserved */ +#define SYSRSTIV_RES12 (0x0012) /* SYSRSTIV : Reserved */ +#define SYSRSTIV_DOPOR (0x0014) /* SYSRSTIV : Do POR */ +#define SYSRSTIV_WDTTO (0x0016) /* SYSRSTIV : WDT Time out */ +#define SYSRSTIV_WDTKEY (0x0018) /* SYSRSTIV : WDTKEY violation */ +#define SYSRSTIV_FRCTLPW (0x001A) /* SYSRSTIV : FRAM Key violation */ +#define SYSRSTIV_UBDIFG (0x001C) /* SYSRSTIV : FRAM Uncorrectable bit Error */ +#define SYSRSTIV_PERF (0x001E) /* SYSRSTIV : peripheral/config area fetch */ +#define SYSRSTIV_PMMPW (0x0020) /* SYSRSTIV : PMM Password violation */ +#define SYSRSTIV_MPUPW (0x0022) /* SYSRSTIV : MPU Password violation */ +#define SYSRSTIV_CSPW (0x0024) /* SYSRSTIV : CS Password violation */ +#define SYSRSTIV_MPUSEGPIFG (0x0026) /* SYSRSTIV : MPUSEGPIFG violation */ +#define SYSRSTIV_MPUSEGIIFG (0x0028) /* SYSRSTIV : MPUSEGIIFG violation */ +#define SYSRSTIV_MPUSEG1IFG (0x002A) /* SYSRSTIV : MPUSEG1IFG violation */ +#define SYSRSTIV_MPUSEG2IFG (0x002C) /* SYSRSTIV : MPUSEG2IFG violation */ +#define SYSRSTIV_MPUSEG3IFG (0x002E) /* SYSRSTIV : MPUSEG3IFG violation */ +#define SYSRSTIV_ACCTEIFG (0x0030) /* SYSRSTIV : ACCTEIFG access time error */ + +/************************************************************ +* Timer0_A3 +************************************************************/ +#define __MSP430_HAS_T0A3__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_T0A3__ 0x0340 +#define TIMER_A0_BASE __MSP430_BASEADDRESS_T0A3__ + +sfr_w(TA0CTL); /* Timer0_A3 Control */ +sfr_w(TA0CCTL0); /* Timer0_A3 Capture/Compare Control 0 */ +sfr_w(TA0CCTL1); /* Timer0_A3 Capture/Compare Control 1 */ +sfr_w(TA0CCTL2); /* Timer0_A3 Capture/Compare Control 2 */ +sfr_w(TA0R); /* Timer0_A3 */ +sfr_w(TA0CCR0); /* Timer0_A3 Capture/Compare 0 */ +sfr_w(TA0CCR1); /* Timer0_A3 Capture/Compare 1 */ +sfr_w(TA0CCR2); /* Timer0_A3 Capture/Compare 2 */ +sfr_w(TA0IV); /* Timer0_A3 Interrupt Vector Word */ +sfr_w(TA0EX0); /* Timer0_A3 Expansion Register 0 */ + +/* TAxCTL Control Bits */ +#define TASSEL1 (0x0200) /* Timer A clock source select 1 */ +#define TASSEL0 (0x0100) /* Timer A clock source select 0 */ +#define ID1 (0x0080) /* Timer A clock input divider 1 */ +#define ID0 (0x0040) /* Timer A clock input divider 0 */ +#define MC1 (0x0020) /* Timer A mode control 1 */ +#define MC0 (0x0010) /* Timer A mode control 0 */ +#define TACLR (0x0004) /* Timer A counter clear */ +#define TAIE (0x0002) /* Timer A counter interrupt enable */ +#define TAIFG (0x0001) /* Timer A counter interrupt flag */ + +#define MC_0 (0x0000) /* Timer A mode control: 0 - Stop */ +#define MC_1 (0x0010) /* Timer A mode control: 1 - Up to CCR0 */ +#define MC_2 (0x0020) /* Timer A mode control: 2 - Continuous up */ +#define MC_3 (0x0030) /* Timer A mode control: 3 - Up/Down */ +#define ID_0 (0x0000) /* Timer A input divider: 0 - /1 */ +#define ID_1 (0x0040) /* Timer A input divider: 1 - /2 */ +#define ID_2 (0x0080) /* Timer A input divider: 2 - /4 */ +#define ID_3 (0x00C0) /* Timer A input divider: 3 - /8 */ +#define TASSEL_0 (0x0000) /* Timer A clock source select: 0 - TACLK */ +#define TASSEL_1 (0x0100) /* Timer A clock source select: 1 - ACLK */ +#define TASSEL_2 (0x0200) /* Timer A clock source select: 2 - SMCLK */ +#define TASSEL_3 (0x0300) /* Timer A clock source select: 3 - INCLK */ +#define MC__STOP (0x0000) /* Timer A mode control: 0 - Stop */ +#define MC__UP (0x0010) /* Timer A mode control: 1 - Up to CCR0 */ +#define MC__CONTINUOUS (0x0020) /* Timer A mode control: 2 - Continuous up */ +#define MC__CONTINOUS (0x0020) /* Legacy define */ +#define MC__UPDOWN (0x0030) /* Timer A mode control: 3 - Up/Down */ +#define ID__1 (0x0000) /* Timer A input divider: 0 - /1 */ +#define ID__2 (0x0040) /* Timer A input divider: 1 - /2 */ +#define ID__4 (0x0080) /* Timer A input divider: 2 - /4 */ +#define ID__8 (0x00C0) /* Timer A input divider: 3 - /8 */ +#define TASSEL__TACLK (0x0000) /* Timer A clock source select: 0 - TACLK */ +#define TASSEL__ACLK (0x0100) /* Timer A clock source select: 1 - ACLK */ +#define TASSEL__SMCLK (0x0200) /* Timer A clock source select: 2 - SMCLK */ +#define TASSEL__INCLK (0x0300) /* Timer A clock source select: 3 - INCLK */ + +/* TAxCCTLx Control Bits */ +#define CM1 (0x8000) /* Capture mode 1 */ +#define CM0 (0x4000) /* Capture mode 0 */ +#define CCIS1 (0x2000) /* Capture input select 1 */ +#define CCIS0 (0x1000) /* Capture input select 0 */ +#define SCS (0x0800) /* Capture sychronize */ +#define SCCI (0x0400) /* Latched capture signal (read) */ +#define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */ +#define OUTMOD2 (0x0080) /* Output mode 2 */ +#define OUTMOD1 (0x0040) /* Output mode 1 */ +#define OUTMOD0 (0x0020) /* Output mode 0 */ +#define CCIE (0x0010) /* Capture/compare interrupt enable */ +#define CCI (0x0008) /* Capture input signal (read) */ +#define OUT (0x0004) /* PWM Output signal if output mode 0 */ +#define COV (0x0002) /* Capture/compare overflow flag */ +#define CCIFG (0x0001) /* Capture/compare interrupt flag */ + +#define OUTMOD_0 (0x0000) /* PWM output mode: 0 - output only */ +#define OUTMOD_1 (0x0020) /* PWM output mode: 1 - set */ +#define OUTMOD_2 (0x0040) /* PWM output mode: 2 - PWM toggle/reset */ +#define OUTMOD_3 (0x0060) /* PWM output mode: 3 - PWM set/reset */ +#define OUTMOD_4 (0x0080) /* PWM output mode: 4 - toggle */ +#define OUTMOD_5 (0x00A0) /* PWM output mode: 5 - Reset */ +#define OUTMOD_6 (0x00C0) /* PWM output mode: 6 - PWM toggle/set */ +#define OUTMOD_7 (0x00E0) /* PWM output mode: 7 - PWM reset/set */ +#define CCIS_0 (0x0000) /* Capture input select: 0 - CCIxA */ +#define CCIS_1 (0x1000) /* Capture input select: 1 - CCIxB */ +#define CCIS_2 (0x2000) /* Capture input select: 2 - GND */ +#define CCIS_3 (0x3000) /* Capture input select: 3 - Vcc */ +#define CM_0 (0x0000) /* Capture mode: 0 - disabled */ +#define CM_1 (0x4000) /* Capture mode: 1 - pos. edge */ +#define CM_2 (0x8000) /* Capture mode: 1 - neg. edge */ +#define CM_3 (0xC000) /* Capture mode: 1 - both edges */ + +/* TAxEX0 Control Bits */ +#define TAIDEX0 (0x0001) /* Timer A Input divider expansion Bit: 0 */ +#define TAIDEX1 (0x0002) /* Timer A Input divider expansion Bit: 1 */ +#define TAIDEX2 (0x0004) /* Timer A Input divider expansion Bit: 2 */ + +#define TAIDEX_0 (0x0000) /* Timer A Input divider expansion : /1 */ +#define TAIDEX_1 (0x0001) /* Timer A Input divider expansion : /2 */ +#define TAIDEX_2 (0x0002) /* Timer A Input divider expansion : /3 */ +#define TAIDEX_3 (0x0003) /* Timer A Input divider expansion : /4 */ +#define TAIDEX_4 (0x0004) /* Timer A Input divider expansion : /5 */ +#define TAIDEX_5 (0x0005) /* Timer A Input divider expansion : /6 */ +#define TAIDEX_6 (0x0006) /* Timer A Input divider expansion : /7 */ +#define TAIDEX_7 (0x0007) /* Timer A Input divider expansion : /8 */ + +/* T0A3IV Definitions */ +#define TA0IV_NONE (0x0000) /* No Interrupt pending */ +#define TA0IV_TACCR1 (0x0002) /* TA0CCR1_CCIFG */ +#define TA0IV_TACCR2 (0x0004) /* TA0CCR2_CCIFG */ +#define TA0IV_3 (0x0006) /* Reserved */ +#define TA0IV_4 (0x0008) /* Reserved */ +#define TA0IV_5 (0x000A) /* Reserved */ +#define TA0IV_6 (0x000C) /* Reserved */ +#define TA0IV_TAIFG (0x000E) /* TA0IFG */ + +/* Legacy Defines */ +#define TA0IV_TA0CCR1 (0x0002) /* TA0CCR1_CCIFG */ +#define TA0IV_TA0CCR2 (0x0004) /* TA0CCR2_CCIFG */ +#define TA0IV_TA0IFG (0x000E) /* TA0IFG */ + +/************************************************************ +* Timer1_A3 +************************************************************/ +#define __MSP430_HAS_T1A3__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_T1A3__ 0x0380 +#define TIMER_A1_BASE __MSP430_BASEADDRESS_T1A3__ + +sfr_w(TA1CTL); /* Timer1_A3 Control */ +sfr_w(TA1CCTL0); /* Timer1_A3 Capture/Compare Control 0 */ +sfr_w(TA1CCTL1); /* Timer1_A3 Capture/Compare Control 1 */ +sfr_w(TA1CCTL2); /* Timer1_A3 Capture/Compare Control 2 */ +sfr_w(TA1R); /* Timer1_A3 */ +sfr_w(TA1CCR0); /* Timer1_A3 Capture/Compare 0 */ +sfr_w(TA1CCR1); /* Timer1_A3 Capture/Compare 1 */ +sfr_w(TA1CCR2); /* Timer1_A3 Capture/Compare 2 */ +sfr_w(TA1IV); /* Timer1_A3 Interrupt Vector Word */ +sfr_w(TA1EX0); /* Timer1_A3 Expansion Register 0 */ + +/* Bits are already defined within the Timer0_Ax */ + +/* TA1IV Definitions */ +#define TA1IV_NONE (0x0000) /* No Interrupt pending */ +#define TA1IV_TACCR1 (0x0002) /* TA1CCR1_CCIFG */ +#define TA1IV_TACCR2 (0x0004) /* TA1CCR2_CCIFG */ +#define TA1IV_3 (0x0006) /* Reserved */ +#define TA1IV_4 (0x0008) /* Reserved */ +#define TA1IV_5 (0x000A) /* Reserved */ +#define TA1IV_6 (0x000C) /* Reserved */ +#define TA1IV_TAIFG (0x000E) /* TA1IFG */ + +/* Legacy Defines */ +#define TA1IV_TA1CCR1 (0x0002) /* TA1CCR1_CCIFG */ +#define TA1IV_TA1CCR2 (0x0004) /* TA1CCR2_CCIFG */ +#define TA1IV_TA1IFG (0x000E) /* TA1IFG */ + +/************************************************************ +* Timer2_A2 +************************************************************/ +#define __MSP430_HAS_T2A2__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_T2A2__ 0x0400 +#define TIMER_A2_BASE __MSP430_BASEADDRESS_T2A2__ + +sfr_w(TA2CTL); /* Timer2_A2 Control */ +sfr_w(TA2CCTL0); /* Timer2_A2 Capture/Compare Control 0 */ +sfr_w(TA2CCTL1); /* Timer2_A2 Capture/Compare Control 1 */ +sfr_w(TA2R); /* Timer2_A2 */ +sfr_w(TA2CCR0); /* Timer2_A2 Capture/Compare 0 */ +sfr_w(TA2CCR1); /* Timer2_A2 Capture/Compare 1 */ +sfr_w(TA2IV); /* Timer2_A2 Interrupt Vector Word */ +sfr_w(TA2EX0); /* Timer2_A2 Expansion Register 0 */ + +/* Bits are already defined within the Timer0_Ax */ + +/* TA2IV Definitions */ +#define TA2IV_NONE (0x0000) /* No Interrupt pending */ +#define TA2IV_TACCR1 (0x0002) /* TA2CCR1_CCIFG */ +#define TA2IV_3 (0x0006) /* Reserved */ +#define TA2IV_4 (0x0008) /* Reserved */ +#define TA2IV_5 (0x000A) /* Reserved */ +#define TA2IV_6 (0x000C) /* Reserved */ +#define TA2IV_TAIFG (0x000E) /* TA2IFG */ + +/* Legacy Defines */ +#define TA2IV_TA2CCR1 (0x0002) /* TA2CCR1_CCIFG */ +#define TA2IV_TA2IFG (0x000E) /* TA2IFG */ + +/************************************************************ +* Timer3_A2 +************************************************************/ +#define __MSP430_HAS_T3A2__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_T3A2__ 0x0440 +#define TIMER_A3_BASE __MSP430_BASEADDRESS_T3A2__ + +sfr_w(TA3CTL); /* Timer3_A2 Control */ +sfr_w(TA3CCTL0); /* Timer3_A2 Capture/Compare Control 0 */ +sfr_w(TA3CCTL1); /* Timer3_A2 Capture/Compare Control 1 */ +sfr_w(TA3R); /* Timer3_A2 */ +sfr_w(TA3CCR0); /* Timer3_A2 Capture/Compare 0 */ +sfr_w(TA3CCR1); /* Timer3_A2 Capture/Compare 1 */ +sfr_w(TA3IV); /* Timer3_A2 Interrupt Vector Word */ +sfr_w(TA3EX0); /* Timer3_A2 Expansion Register 0 */ + +/* Bits are already defined within the Timer0_Ax */ + +/* TA3IV Definitions */ +#define TA3IV_NONE (0x0000) /* No Interrupt pending */ +#define TA3IV_TACCR1 (0x0002) /* TA3CCR1_CCIFG */ +#define TA3IV_3 (0x0006) /* Reserved */ +#define TA3IV_4 (0x0008) /* Reserved */ +#define TA3IV_5 (0x000A) /* Reserved */ +#define TA3IV_6 (0x000C) /* Reserved */ +#define TA3IV_TAIFG (0x000E) /* TA3IFG */ + +/* Legacy Defines */ +#define TA3IV_TA3CCR1 (0x0002) /* TA3CCR1_CCIFG */ +#define TA3IV_TA3IFG (0x000E) /* TA3IFG */ + +/************************************************************ +* Timer0_B7 +************************************************************/ +#define __MSP430_HAS_T0B7__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_T0B7__ 0x03C0 +#define TIMER_B0_BASE __MSP430_BASEADDRESS_T0B7__ + +sfr_w(TB0CTL); /* Timer0_B7 Control */ +sfr_w(TB0CCTL0); /* Timer0_B7 Capture/Compare Control 0 */ +sfr_w(TB0CCTL1); /* Timer0_B7 Capture/Compare Control 1 */ +sfr_w(TB0CCTL2); /* Timer0_B7 Capture/Compare Control 2 */ +sfr_w(TB0CCTL3); /* Timer0_B7 Capture/Compare Control 3 */ +sfr_w(TB0CCTL4); /* Timer0_B7 Capture/Compare Control 4 */ +sfr_w(TB0CCTL5); /* Timer0_B7 Capture/Compare Control 5 */ +sfr_w(TB0CCTL6); /* Timer0_B7 Capture/Compare Control 6 */ +sfr_w(TB0R); /* Timer0_B7 */ +sfr_w(TB0CCR0); /* Timer0_B7 Capture/Compare 0 */ +sfr_w(TB0CCR1); /* Timer0_B7 Capture/Compare 1 */ +sfr_w(TB0CCR2); /* Timer0_B7 Capture/Compare 2 */ +sfr_w(TB0CCR3); /* Timer0_B7 Capture/Compare 3 */ +sfr_w(TB0CCR4); /* Timer0_B7 Capture/Compare 4 */ +sfr_w(TB0CCR5); /* Timer0_B7 Capture/Compare 5 */ +sfr_w(TB0CCR6); /* Timer0_B7 Capture/Compare 6 */ +sfr_w(TB0EX0); /* Timer0_B7 Expansion Register 0 */ +sfr_w(TB0IV); /* Timer0_B7 Interrupt Vector Word */ + +/* Legacy Type Definitions for TimerB */ +#define TBCTL TB0CTL /* Timer0_B7 Control */ +#define TBCCTL0 TB0CCTL0 /* Timer0_B7 Capture/Compare Control 0 */ +#define TBCCTL1 TB0CCTL1 /* Timer0_B7 Capture/Compare Control 1 */ +#define TBCCTL2 TB0CCTL2 /* Timer0_B7 Capture/Compare Control 2 */ +#define TBCCTL3 TB0CCTL3 /* Timer0_B7 Capture/Compare Control 3 */ +#define TBCCTL4 TB0CCTL4 /* Timer0_B7 Capture/Compare Control 4 */ +#define TBCCTL5 TB0CCTL5 /* Timer0_B7 Capture/Compare Control 5 */ +#define TBCCTL6 TB0CCTL6 /* Timer0_B7 Capture/Compare Control 6 */ +#define TBR TB0R /* Timer0_B7 */ +#define TBCCR0 TB0CCR0 /* Timer0_B7 Capture/Compare 0 */ +#define TBCCR1 TB0CCR1 /* Timer0_B7 Capture/Compare 1 */ +#define TBCCR2 TB0CCR2 /* Timer0_B7 Capture/Compare 2 */ +#define TBCCR3 TB0CCR3 /* Timer0_B7 Capture/Compare 3 */ +#define TBCCR4 TB0CCR4 /* Timer0_B7 Capture/Compare 4 */ +#define TBCCR5 TB0CCR5 /* Timer0_B7 Capture/Compare 5 */ +#define TBCCR6 TB0CCR6 /* Timer0_B7 Capture/Compare 6 */ +#define TBEX0 TB0EX0 /* Timer0_B7 Expansion Register 0 */ +#define TBIV TB0IV /* Timer0_B7 Interrupt Vector Word */ +#define TIMERB1_VECTOR TIMER0_B1_VECTOR /* Timer0_B7 CC1-6, TB */ +#define TIMERB0_VECTOR TIMER0_B0_VECTOR /* Timer0_B7 CC0 */ + +/* TBxCTL Control Bits */ +#define TBCLGRP1 (0x4000) /* Timer0_B7 Compare latch load group 1 */ +#define TBCLGRP0 (0x2000) /* Timer0_B7 Compare latch load group 0 */ +#define CNTL1 (0x1000) /* Counter lenght 1 */ +#define CNTL0 (0x0800) /* Counter lenght 0 */ +#define TBSSEL1 (0x0200) /* Clock source 1 */ +#define TBSSEL0 (0x0100) /* Clock source 0 */ +#define TBCLR (0x0004) /* Timer0_B7 counter clear */ +#define TBIE (0x0002) /* Timer0_B7 interrupt enable */ +#define TBIFG (0x0001) /* Timer0_B7 interrupt flag */ + +#define SHR1 (0x4000) /* Timer0_B7 Compare latch load group 1 */ +#define SHR0 (0x2000) /* Timer0_B7 Compare latch load group 0 */ + +#define TBSSEL_0 (0x0000) /* Clock Source: TBCLK */ +#define TBSSEL_1 (0x0100) /* Clock Source: ACLK */ +#define TBSSEL_2 (0x0200) /* Clock Source: SMCLK */ +#define TBSSEL_3 (0x0300) /* Clock Source: INCLK */ +#define CNTL_0 (0x0000) /* Counter lenght: 16 bit */ +#define CNTL_1 (0x0800) /* Counter lenght: 12 bit */ +#define CNTL_2 (0x1000) /* Counter lenght: 10 bit */ +#define CNTL_3 (0x1800) /* Counter lenght: 8 bit */ +#define SHR_0 (0x0000) /* Timer0_B7 Group: 0 - individually */ +#define SHR_1 (0x2000) /* Timer0_B7 Group: 1 - 3 groups (1-2, 3-4, 5-6) */ +#define SHR_2 (0x4000) /* Timer0_B7 Group: 2 - 2 groups (1-3, 4-6)*/ +#define SHR_3 (0x6000) /* Timer0_B7 Group: 3 - 1 group (all) */ +#define TBCLGRP_0 (0x0000) /* Timer0_B7 Group: 0 - individually */ +#define TBCLGRP_1 (0x2000) /* Timer0_B7 Group: 1 - 3 groups (1-2, 3-4, 5-6) */ +#define TBCLGRP_2 (0x4000) /* Timer0_B7 Group: 2 - 2 groups (1-3, 4-6)*/ +#define TBCLGRP_3 (0x6000) /* Timer0_B7 Group: 3 - 1 group (all) */ +#define TBSSEL__TBCLK (0x0000) /* Timer0_B7 clock source select: 0 - TBCLK */ +#define TBSSEL__TACLK (0x0000) /* Timer0_B7 clock source select: 0 - TBCLK (legacy) */ +#define TBSSEL__ACLK (0x0100) /* Timer0_B7 clock source select: 1 - ACLK */ +#define TBSSEL__SMCLK (0x0200) /* Timer0_B7 clock source select: 2 - SMCLK */ +#define TBSSEL__INCLK (0x0300) /* Timer0_B7 clock source select: 3 - INCLK */ +#define CNTL__16 (0x0000) /* Counter lenght: 16 bit */ +#define CNTL__12 (0x0800) /* Counter lenght: 12 bit */ +#define CNTL__10 (0x1000) /* Counter lenght: 10 bit */ +#define CNTL__8 (0x1800) /* Counter lenght: 8 bit */ + +/* Additional Timer B Control Register bits are defined in Timer A */ +/* TBxCCTLx Control Bits */ +#define CLLD1 (0x0400) /* Compare latch load source 1 */ +#define CLLD0 (0x0200) /* Compare latch load source 0 */ + +#define SLSHR1 (0x0400) /* Compare latch load source 1 */ +#define SLSHR0 (0x0200) /* Compare latch load source 0 */ + +#define SLSHR_0 (0x0000) /* Compare latch load sourec : 0 - immediate */ +#define SLSHR_1 (0x0200) /* Compare latch load sourec : 1 - TBR counts to 0 */ +#define SLSHR_2 (0x0400) /* Compare latch load sourec : 2 - up/down */ +#define SLSHR_3 (0x0600) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */ + +#define CLLD_0 (0x0000) /* Compare latch load sourec : 0 - immediate */ +#define CLLD_1 (0x0200) /* Compare latch load sourec : 1 - TBR counts to 0 */ +#define CLLD_2 (0x0400) /* Compare latch load sourec : 2 - up/down */ +#define CLLD_3 (0x0600) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */ + +/* TBxEX0 Control Bits */ +#define TBIDEX0 (0x0001) /* Timer0_B7 Input divider expansion Bit: 0 */ +#define TBIDEX1 (0x0002) /* Timer0_B7 Input divider expansion Bit: 1 */ +#define TBIDEX2 (0x0004) /* Timer0_B7 Input divider expansion Bit: 2 */ + +#define TBIDEX_0 (0x0000) /* Timer0_B7 Input divider expansion : /1 */ +#define TBIDEX_1 (0x0001) /* Timer0_B7 Input divider expansion : /2 */ +#define TBIDEX_2 (0x0002) /* Timer0_B7 Input divider expansion : /3 */ +#define TBIDEX_3 (0x0003) /* Timer0_B7 Input divider expansion : /4 */ +#define TBIDEX_4 (0x0004) /* Timer0_B7 Input divider expansion : /5 */ +#define TBIDEX_5 (0x0005) /* Timer0_B7 Input divider expansion : /6 */ +#define TBIDEX_6 (0x0006) /* Timer0_B7 Input divider expansion : /7 */ +#define TBIDEX_7 (0x0007) /* Timer0_B7 Input divider expansion : /8 */ +#define TBIDEX__1 (0x0000) /* Timer0_B7 Input divider expansion : /1 */ +#define TBIDEX__2 (0x0001) /* Timer0_B7 Input divider expansion : /2 */ +#define TBIDEX__3 (0x0002) /* Timer0_B7 Input divider expansion : /3 */ +#define TBIDEX__4 (0x0003) /* Timer0_B7 Input divider expansion : /4 */ +#define TBIDEX__5 (0x0004) /* Timer0_B7 Input divider expansion : /5 */ +#define TBIDEX__6 (0x0005) /* Timer0_B7 Input divider expansion : /6 */ +#define TBIDEX__7 (0x0006) /* Timer0_B7 Input divider expansion : /7 */ +#define TBIDEX__8 (0x0007) /* Timer0_B7 Input divider expansion : /8 */ + +/* TB0IV Definitions */ +#define TB0IV_NONE (0x0000) /* No Interrupt pending */ +#define TB0IV_TBCCR1 (0x0002) /* TB0CCR1_CCIFG */ +#define TB0IV_TBCCR2 (0x0004) /* TB0CCR2_CCIFG */ +#define TB0IV_TBCCR3 (0x0006) /* TB0CCR3_CCIFG */ +#define TB0IV_TBCCR4 (0x0008) /* TB0CCR4_CCIFG */ +#define TB0IV_TBCCR5 (0x000A) /* TB0CCR5_CCIFG */ +#define TB0IV_TBCCR6 (0x000C) /* TB0CCR6_CCIFG */ +#define TB0IV_TBIFG (0x000E) /* TB0IFG */ + +/* Legacy Defines */ +#define TB0IV_TB0CCR1 (0x0002) /* TB0CCR1_CCIFG */ +#define TB0IV_TB0CCR2 (0x0004) /* TB0CCR2_CCIFG */ +#define TB0IV_TB0CCR3 (0x0006) /* TB0CCR3_CCIFG */ +#define TB0IV_TB0CCR4 (0x0008) /* TB0CCR4_CCIFG */ +#define TB0IV_TB0CCR5 (0x000A) /* TB0CCR5_CCIFG */ +#define TB0IV_TB0CCR6 (0x000C) /* TB0CCR6_CCIFG */ +#define TB0IV_TB0IFG (0x000E) /* TB0IFG */ + + +/************************************************************ +* USCI A0 +************************************************************/ +#define __MSP430_HAS_EUSCI_A0__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_EUSCI_A0__ 0x05C0 +#define EUSCI_A0_BASE __MSP430_BASEADDRESS_EUSCI_A0__ + +sfr_w(UCA0CTLW0); /* USCI A0 Control Word Register 0 */ +sfr_b(UCA0CTLW0_L); /* USCI A0 Control Word Register 0 */ +sfr_b(UCA0CTLW0_H); /* USCI A0 Control Word Register 0 */ +#define UCA0CTL1 UCA0CTLW0_L /* USCI A0 Control Register 1 */ +#define UCA0CTL0 UCA0CTLW0_H /* USCI A0 Control Register 0 */ +sfr_w(UCA0CTLW1); /* USCI A0 Control Word Register 1 */ +sfr_b(UCA0CTLW1_L); /* USCI A0 Control Word Register 1 */ +sfr_b(UCA0CTLW1_H); /* USCI A0 Control Word Register 1 */ +sfr_w(UCA0BRW); /* USCI A0 Baud Word Rate 0 */ +sfr_b(UCA0BRW_L); /* USCI A0 Baud Word Rate 0 */ +sfr_b(UCA0BRW_H); /* USCI A0 Baud Word Rate 0 */ +#define UCA0BR0 UCA0BRW_L /* USCI A0 Baud Rate 0 */ +#define UCA0BR1 UCA0BRW_H /* USCI A0 Baud Rate 1 */ +sfr_w(UCA0MCTLW); /* USCI A0 Modulation Control */ +sfr_b(UCA0MCTLW_L); /* USCI A0 Modulation Control */ +sfr_b(UCA0MCTLW_H); /* USCI A0 Modulation Control */ +sfr_b(UCA0STATW); /* USCI A0 Status Register */ +sfr_w(UCA0RXBUF); /* USCI A0 Receive Buffer */ +sfr_b(UCA0RXBUF_L); /* USCI A0 Receive Buffer */ +sfr_b(UCA0RXBUF_H); /* USCI A0 Receive Buffer */ +sfr_w(UCA0TXBUF); /* USCI A0 Transmit Buffer */ +sfr_b(UCA0TXBUF_L); /* USCI A0 Transmit Buffer */ +sfr_b(UCA0TXBUF_H); /* USCI A0 Transmit Buffer */ +sfr_b(UCA0ABCTL); /* USCI A0 LIN Control */ +sfr_w(UCA0IRCTL); /* USCI A0 IrDA Transmit Control */ +sfr_b(UCA0IRCTL_L); /* USCI A0 IrDA Transmit Control */ +sfr_b(UCA0IRCTL_H); /* USCI A0 IrDA Transmit Control */ +#define UCA0IRTCTL UCA0IRCTL_L /* USCI A0 IrDA Transmit Control */ +#define UCA0IRRCTL UCA0IRCTL_H /* USCI A0 IrDA Receive Control */ +sfr_w(UCA0IE); /* USCI A0 Interrupt Enable Register */ +sfr_b(UCA0IE_L); /* USCI A0 Interrupt Enable Register */ +sfr_b(UCA0IE_H); /* USCI A0 Interrupt Enable Register */ +sfr_w(UCA0IFG); /* USCI A0 Interrupt Flags Register */ +sfr_b(UCA0IFG_L); /* USCI A0 Interrupt Flags Register */ +sfr_b(UCA0IFG_H); /* USCI A0 Interrupt Flags Register */ +sfr_w(UCA0IV); /* USCI A0 Interrupt Vector Register */ + + +/************************************************************ +* USCI A1 +************************************************************/ +#define __MSP430_HAS_EUSCI_A1__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_EUSCI_A1__ 0x05E0 +#define EUSCI_A1_BASE __MSP430_BASEADDRESS_EUSCI_A1__ + +sfr_w(UCA1CTLW0); /* USCI A1 Control Word Register 0 */ +sfr_b(UCA1CTLW0_L); /* USCI A1 Control Word Register 0 */ +sfr_b(UCA1CTLW0_H); /* USCI A1 Control Word Register 0 */ +#define UCA1CTL1 UCA1CTLW0_L /* USCI A1 Control Register 1 */ +#define UCA1CTL0 UCA1CTLW0_H /* USCI A1 Control Register 0 */ +sfr_w(UCA1CTLW1); /* USCI A1 Control Word Register 1 */ +sfr_b(UCA1CTLW1_L); /* USCI A1 Control Word Register 1 */ +sfr_b(UCA1CTLW1_H); /* USCI A1 Control Word Register 1 */ +sfr_w(UCA1BRW); /* USCI A1 Baud Word Rate 0 */ +sfr_b(UCA1BRW_L); /* USCI A1 Baud Word Rate 0 */ +sfr_b(UCA1BRW_H); /* USCI A1 Baud Word Rate 0 */ +#define UCA1BR0 UCA1BRW_L /* USCI A1 Baud Rate 0 */ +#define UCA1BR1 UCA1BRW_H /* USCI A1 Baud Rate 1 */ +sfr_w(UCA1MCTLW); /* USCI A1 Modulation Control */ +sfr_b(UCA1MCTLW_L); /* USCI A1 Modulation Control */ +sfr_b(UCA1MCTLW_H); /* USCI A1 Modulation Control */ +sfr_b(UCA1STATW); /* USCI A1 Status Register */ +sfr_w(UCA1RXBUF); /* USCI A1 Receive Buffer */ +sfr_b(UCA1RXBUF_L); /* USCI A1 Receive Buffer */ +sfr_b(UCA1RXBUF_H); /* USCI A1 Receive Buffer */ +sfr_w(UCA1TXBUF); /* USCI A1 Transmit Buffer */ +sfr_b(UCA1TXBUF_L); /* USCI A1 Transmit Buffer */ +sfr_b(UCA1TXBUF_H); /* USCI A1 Transmit Buffer */ +sfr_b(UCA1ABCTL); /* USCI A1 LIN Control */ +sfr_w(UCA1IRCTL); /* USCI A1 IrDA Transmit Control */ +sfr_b(UCA1IRCTL_L); /* USCI A1 IrDA Transmit Control */ +sfr_b(UCA1IRCTL_H); /* USCI A1 IrDA Transmit Control */ +#define UCA1IRTCTL UCA1IRCTL_L /* USCI A1 IrDA Transmit Control */ +#define UCA1IRRCTL UCA1IRCTL_H /* USCI A1 IrDA Receive Control */ +sfr_w(UCA1IE); /* USCI A1 Interrupt Enable Register */ +sfr_b(UCA1IE_L); /* USCI A1 Interrupt Enable Register */ +sfr_b(UCA1IE_H); /* USCI A1 Interrupt Enable Register */ +sfr_w(UCA1IFG); /* USCI A1 Interrupt Flags Register */ +sfr_b(UCA1IFG_L); /* USCI A1 Interrupt Flags Register */ +sfr_b(UCA1IFG_H); /* USCI A1 Interrupt Flags Register */ +sfr_w(UCA1IV); /* USCI A1 Interrupt Vector Register */ + + +/************************************************************ +* USCI B0 +************************************************************/ +#define __MSP430_HAS_EUSCI_B0__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_EUSCI_B0__ 0x0640 +#define EUSCI_B0_BASE __MSP430_BASEADDRESS_EUSCI_B0__ + + +sfr_w(UCB0CTLW0); /* USCI B0 Control Word Register 0 */ +sfr_b(UCB0CTLW0_L); /* USCI B0 Control Word Register 0 */ +sfr_b(UCB0CTLW0_H); /* USCI B0 Control Word Register 0 */ +#define UCB0CTL1 UCB0CTLW0_L /* USCI B0 Control Register 1 */ +#define UCB0CTL0 UCB0CTLW0_H /* USCI B0 Control Register 0 */ +sfr_w(UCB0CTLW1); /* USCI B0 Control Word Register 1 */ +sfr_b(UCB0CTLW1_L); /* USCI B0 Control Word Register 1 */ +sfr_b(UCB0CTLW1_H); /* USCI B0 Control Word Register 1 */ +sfr_w(UCB0BRW); /* USCI B0 Baud Word Rate 0 */ +sfr_b(UCB0BRW_L); /* USCI B0 Baud Word Rate 0 */ +sfr_b(UCB0BRW_H); /* USCI B0 Baud Word Rate 0 */ +#define UCB0BR0 UCB0BRW_L /* USCI B0 Baud Rate 0 */ +#define UCB0BR1 UCB0BRW_H /* USCI B0 Baud Rate 1 */ +sfr_w(UCB0STATW); /* USCI B0 Status Word Register */ +sfr_b(UCB0STATW_L); /* USCI B0 Status Word Register */ +sfr_b(UCB0STATW_H); /* USCI B0 Status Word Register */ +#define UCB0STAT UCB0STATW_L /* USCI B0 Status Register */ +#define UCB0BCNT UCB0STATW_H /* USCI B0 Byte Counter Register */ +sfr_w(UCB0TBCNT); /* USCI B0 Byte Counter Threshold Register */ +sfr_b(UCB0TBCNT_L); /* USCI B0 Byte Counter Threshold Register */ +sfr_b(UCB0TBCNT_H); /* USCI B0 Byte Counter Threshold Register */ +sfr_w(UCB0RXBUF); /* USCI B0 Receive Buffer */ +sfr_b(UCB0RXBUF_L); /* USCI B0 Receive Buffer */ +sfr_b(UCB0RXBUF_H); /* USCI B0 Receive Buffer */ +sfr_w(UCB0TXBUF); /* USCI B0 Transmit Buffer */ +sfr_b(UCB0TXBUF_L); /* USCI B0 Transmit Buffer */ +sfr_b(UCB0TXBUF_H); /* USCI B0 Transmit Buffer */ +sfr_w(UCB0I2COA0); /* USCI B0 I2C Own Address 0 */ +sfr_b(UCB0I2COA0_L); /* USCI B0 I2C Own Address 0 */ +sfr_b(UCB0I2COA0_H); /* USCI B0 I2C Own Address 0 */ +sfr_w(UCB0I2COA1); /* USCI B0 I2C Own Address 1 */ +sfr_b(UCB0I2COA1_L); /* USCI B0 I2C Own Address 1 */ +sfr_b(UCB0I2COA1_H); /* USCI B0 I2C Own Address 1 */ +sfr_w(UCB0I2COA2); /* USCI B0 I2C Own Address 2 */ +sfr_b(UCB0I2COA2_L); /* USCI B0 I2C Own Address 2 */ +sfr_b(UCB0I2COA2_H); /* USCI B0 I2C Own Address 2 */ +sfr_w(UCB0I2COA3); /* USCI B0 I2C Own Address 3 */ +sfr_b(UCB0I2COA3_L); /* USCI B0 I2C Own Address 3 */ +sfr_b(UCB0I2COA3_H); /* USCI B0 I2C Own Address 3 */ +sfr_w(UCB0ADDRX); /* USCI B0 Received Address Register */ +sfr_b(UCB0ADDRX_L); /* USCI B0 Received Address Register */ +sfr_b(UCB0ADDRX_H); /* USCI B0 Received Address Register */ +sfr_w(UCB0ADDMASK); /* USCI B0 Address Mask Register */ +sfr_b(UCB0ADDMASK_L); /* USCI B0 Address Mask Register */ +sfr_b(UCB0ADDMASK_H); /* USCI B0 Address Mask Register */ +sfr_w(UCB0I2CSA); /* USCI B0 I2C Slave Address */ +sfr_b(UCB0I2CSA_L); /* USCI B0 I2C Slave Address */ +sfr_b(UCB0I2CSA_H); /* USCI B0 I2C Slave Address */ +sfr_w(UCB0IE); /* USCI B0 Interrupt Enable Register */ +sfr_b(UCB0IE_L); /* USCI B0 Interrupt Enable Register */ +sfr_b(UCB0IE_H); /* USCI B0 Interrupt Enable Register */ +sfr_w(UCB0IFG); /* USCI B0 Interrupt Flags Register */ +sfr_b(UCB0IFG_L); /* USCI B0 Interrupt Flags Register */ +sfr_b(UCB0IFG_H); /* USCI B0 Interrupt Flags Register */ +sfr_w(UCB0IV); /* USCI B0 Interrupt Vector Register */ + +// UCAxCTLW0 UART-Mode Control Bits +#define UCPEN (0x8000) /* Async. Mode: Parity enable */ +#define UCPAR (0x4000) /* Async. Mode: Parity 0:odd / 1:even */ +#define UCMSB (0x2000) /* Async. Mode: MSB first 0:LSB / 1:MSB */ +#define UC7BIT (0x1000) /* Async. Mode: Data Bits 0:8-bits / 1:7-bits */ +#define UCSPB (0x0800) /* Async. Mode: Stop Bits 0:one / 1: two */ +#define UCMODE1 (0x0400) /* Async. Mode: USCI Mode 1 */ +#define UCMODE0 (0x0200) /* Async. Mode: USCI Mode 0 */ +#define UCSYNC (0x0100) /* Sync-Mode 0:UART-Mode / 1:SPI-Mode */ +#define UCSSEL1 (0x0080) /* USCI 0 Clock Source Select 1 */ +#define UCSSEL0 (0x0040) /* USCI 0 Clock Source Select 0 */ +#define UCRXEIE (0x0020) /* RX Error interrupt enable */ +#define UCBRKIE (0x0010) /* Break interrupt enable */ +#define UCDORM (0x0008) /* Dormant (Sleep) Mode */ +#define UCTXADDR (0x0004) /* Send next Data as Address */ +#define UCTXBRK (0x0002) /* Send next Data as Break */ +#define UCSWRST (0x0001) /* USCI Software Reset */ + +// UCAxCTLW0 UART-Mode Control Bits +#define UCSSEL1_L (0x0080) /* USCI 0 Clock Source Select 1 */ +#define UCSSEL0_L (0x0040) /* USCI 0 Clock Source Select 0 */ +#define UCRXEIE_L (0x0020) /* RX Error interrupt enable */ +#define UCBRKIE_L (0x0010) /* Break interrupt enable */ +#define UCDORM_L (0x0008) /* Dormant (Sleep) Mode */ +#define UCTXADDR_L (0x0004) /* Send next Data as Address */ +#define UCTXBRK_L (0x0002) /* Send next Data as Break */ +#define UCSWRST_L (0x0001) /* USCI Software Reset */ + +// UCAxCTLW0 UART-Mode Control Bits +#define UCPEN_H (0x0080) /* Async. Mode: Parity enable */ +#define UCPAR_H (0x0040) /* Async. Mode: Parity 0:odd / 1:even */ +#define UCMSB_H (0x0020) /* Async. Mode: MSB first 0:LSB / 1:MSB */ +#define UC7BIT_H (0x0010) /* Async. Mode: Data Bits 0:8-bits / 1:7-bits */ +#define UCSPB_H (0x0008) /* Async. Mode: Stop Bits 0:one / 1: two */ +#define UCMODE1_H (0x0004) /* Async. Mode: USCI Mode 1 */ +#define UCMODE0_H (0x0002) /* Async. Mode: USCI Mode 0 */ +#define UCSYNC_H (0x0001) /* Sync-Mode 0:UART-Mode / 1:SPI-Mode */ + +// UCxxCTLW0 SPI-Mode Control Bits +#define UCCKPH (0x8000) /* Sync. Mode: Clock Phase */ +#define UCCKPL (0x4000) /* Sync. Mode: Clock Polarity */ +#define UCMST (0x0800) /* Sync. Mode: Master Select */ +//#define res (0x0020) /* reserved */ +//#define res (0x0010) /* reserved */ +//#define res (0x0008) /* reserved */ +//#define res (0x0004) /* reserved */ +#define UCSTEM (0x0002) /* USCI STE Mode */ + +// UCBxCTLW0 I2C-Mode Control Bits +#define UCA10 (0x8000) /* 10-bit Address Mode */ +#define UCSLA10 (0x4000) /* 10-bit Slave Address Mode */ +#define UCMM (0x2000) /* Multi-Master Environment */ +//#define res (0x1000) /* reserved */ +//#define res (0x0100) /* reserved */ +#define UCTXACK (0x0020) /* Transmit ACK */ +#define UCTR (0x0010) /* Transmit/Receive Select/Flag */ +#define UCTXNACK (0x0008) /* Transmit NACK */ +#define UCTXSTP (0x0004) /* Transmit STOP */ +#define UCTXSTT (0x0002) /* Transmit START */ + +// UCBxCTLW0 I2C-Mode Control Bits +//#define res (0x1000) /* reserved */ +//#define res (0x0100) /* reserved */ +#define UCTXACK_L (0x0020) /* Transmit ACK */ +#define UCTR_L (0x0010) /* Transmit/Receive Select/Flag */ +#define UCTXNACK_L (0x0008) /* Transmit NACK */ +#define UCTXSTP_L (0x0004) /* Transmit STOP */ +#define UCTXSTT_L (0x0002) /* Transmit START */ + +// UCBxCTLW0 I2C-Mode Control Bits +#define UCA10_H (0x0080) /* 10-bit Address Mode */ +#define UCSLA10_H (0x0040) /* 10-bit Slave Address Mode */ +#define UCMM_H (0x0020) /* Multi-Master Environment */ +//#define res (0x1000) /* reserved */ +//#define res (0x0100) /* reserved */ + +#define UCMODE_0 (0x0000) /* Sync. Mode: USCI Mode: 0 */ +#define UCMODE_1 (0x0200) /* Sync. Mode: USCI Mode: 1 */ +#define UCMODE_2 (0x0400) /* Sync. Mode: USCI Mode: 2 */ +#define UCMODE_3 (0x0600) /* Sync. Mode: USCI Mode: 3 */ + +#define UCSSEL_0 (0x0000) /* USCI 0 Clock Source: 0 */ +#define UCSSEL_1 (0x0040) /* USCI 0 Clock Source: 1 */ +#define UCSSEL_2 (0x0080) /* USCI 0 Clock Source: 2 */ +#define UCSSEL_3 (0x00C0) /* USCI 0 Clock Source: 3 */ +#define UCSSEL__UCLK (0x0000) /* USCI 0 Clock Source: UCLK */ +#define UCSSEL__ACLK (0x0040) /* USCI 0 Clock Source: ACLK */ +#define UCSSEL__SMCLK (0x0080) /* USCI 0 Clock Source: SMCLK */ + +// UCAxCTLW1 UART-Mode Control Bits +#define UCGLIT1 (0x0002) /* USCI Deglitch Time Bit 1 */ +#define UCGLIT0 (0x0001) /* USCI Deglitch Time Bit 0 */ + +// UCAxCTLW1 UART-Mode Control Bits +#define UCGLIT1_L (0x0002) /* USCI Deglitch Time Bit 1 */ +#define UCGLIT0_L (0x0001) /* USCI Deglitch Time Bit 0 */ + +// UCBxCTLW1 I2C-Mode Control Bits +#define UCETXINT (0x0100) /* USCI Early UCTXIFG0 */ +#define UCCLTO1 (0x0080) /* USCI Clock low timeout Bit: 1 */ +#define UCCLTO0 (0x0040) /* USCI Clock low timeout Bit: 0 */ +#define UCSTPNACK (0x0020) /* USCI Acknowledge Stop last byte */ +#define UCSWACK (0x0010) /* USCI Software controlled ACK */ +#define UCASTP1 (0x0008) /* USCI Automatic Stop condition generation Bit: 1 */ +#define UCASTP0 (0x0004) /* USCI Automatic Stop condition generation Bit: 0 */ +#define UCGLIT1 (0x0002) /* USCI Deglitch time Bit: 1 */ +#define UCGLIT0 (0x0001) /* USCI Deglitch time Bit: 0 */ + +// UCBxCTLW1 I2C-Mode Control Bits +#define UCCLTO1_L (0x0080) /* USCI Clock low timeout Bit: 1 */ +#define UCCLTO0_L (0x0040) /* USCI Clock low timeout Bit: 0 */ +#define UCSTPNACK_L (0x0020) /* USCI Acknowledge Stop last byte */ +#define UCSWACK_L (0x0010) /* USCI Software controlled ACK */ +#define UCASTP1_L (0x0008) /* USCI Automatic Stop condition generation Bit: 1 */ +#define UCASTP0_L (0x0004) /* USCI Automatic Stop condition generation Bit: 0 */ +#define UCGLIT1_L (0x0002) /* USCI Deglitch time Bit: 1 */ +#define UCGLIT0_L (0x0001) /* USCI Deglitch time Bit: 0 */ + +// UCBxCTLW1 I2C-Mode Control Bits +#define UCETXINT_H (0x0001) /* USCI Early UCTXIFG0 */ + +#define UCGLIT_0 (0x0000) /* USCI Deglitch time: 0 */ +#define UCGLIT_1 (0x0001) /* USCI Deglitch time: 1 */ +#define UCGLIT_2 (0x0002) /* USCI Deglitch time: 2 */ +#define UCGLIT_3 (0x0003) /* USCI Deglitch time: 3 */ + +#define UCASTP_0 (0x0000) /* USCI Automatic Stop condition generation: 0 */ +#define UCASTP_1 (0x0004) /* USCI Automatic Stop condition generation: 1 */ +#define UCASTP_2 (0x0008) /* USCI Automatic Stop condition generation: 2 */ +#define UCASTP_3 (0x000C) /* USCI Automatic Stop condition generation: 3 */ + +#define UCCLTO_0 (0x0000) /* USCI Clock low timeout: 0 */ +#define UCCLTO_1 (0x0040) /* USCI Clock low timeout: 1 */ +#define UCCLTO_2 (0x0080) /* USCI Clock low timeout: 2 */ +#define UCCLTO_3 (0x00C0) /* USCI Clock low timeout: 3 */ + +/* UCAxMCTLW Control Bits */ +#define UCBRS7 (0x8000) /* USCI Second Stage Modulation Select 7 */ +#define UCBRS6 (0x4000) /* USCI Second Stage Modulation Select 6 */ +#define UCBRS5 (0x2000) /* USCI Second Stage Modulation Select 5 */ +#define UCBRS4 (0x1000) /* USCI Second Stage Modulation Select 4 */ +#define UCBRS3 (0x0800) /* USCI Second Stage Modulation Select 3 */ +#define UCBRS2 (0x0400) /* USCI Second Stage Modulation Select 2 */ +#define UCBRS1 (0x0200) /* USCI Second Stage Modulation Select 1 */ +#define UCBRS0 (0x0100) /* USCI Second Stage Modulation Select 0 */ +#define UCBRF3 (0x0080) /* USCI First Stage Modulation Select 3 */ +#define UCBRF2 (0x0040) /* USCI First Stage Modulation Select 2 */ +#define UCBRF1 (0x0020) /* USCI First Stage Modulation Select 1 */ +#define UCBRF0 (0x0010) /* USCI First Stage Modulation Select 0 */ +#define UCOS16 (0x0001) /* USCI 16-times Oversampling enable */ + +/* UCAxMCTLW Control Bits */ +#define UCBRF3_L (0x0080) /* USCI First Stage Modulation Select 3 */ +#define UCBRF2_L (0x0040) /* USCI First Stage Modulation Select 2 */ +#define UCBRF1_L (0x0020) /* USCI First Stage Modulation Select 1 */ +#define UCBRF0_L (0x0010) /* USCI First Stage Modulation Select 0 */ +#define UCOS16_L (0x0001) /* USCI 16-times Oversampling enable */ + +/* UCAxMCTLW Control Bits */ +#define UCBRS7_H (0x0080) /* USCI Second Stage Modulation Select 7 */ +#define UCBRS6_H (0x0040) /* USCI Second Stage Modulation Select 6 */ +#define UCBRS5_H (0x0020) /* USCI Second Stage Modulation Select 5 */ +#define UCBRS4_H (0x0010) /* USCI Second Stage Modulation Select 4 */ +#define UCBRS3_H (0x0008) /* USCI Second Stage Modulation Select 3 */ +#define UCBRS2_H (0x0004) /* USCI Second Stage Modulation Select 2 */ +#define UCBRS1_H (0x0002) /* USCI Second Stage Modulation Select 1 */ +#define UCBRS0_H (0x0001) /* USCI Second Stage Modulation Select 0 */ + +#define UCBRF_0 (0x00) /* USCI First Stage Modulation: 0 */ +#define UCBRF_1 (0x10) /* USCI First Stage Modulation: 1 */ +#define UCBRF_2 (0x20) /* USCI First Stage Modulation: 2 */ +#define UCBRF_3 (0x30) /* USCI First Stage Modulation: 3 */ +#define UCBRF_4 (0x40) /* USCI First Stage Modulation: 4 */ +#define UCBRF_5 (0x50) /* USCI First Stage Modulation: 5 */ +#define UCBRF_6 (0x60) /* USCI First Stage Modulation: 6 */ +#define UCBRF_7 (0x70) /* USCI First Stage Modulation: 7 */ +#define UCBRF_8 (0x80) /* USCI First Stage Modulation: 8 */ +#define UCBRF_9 (0x90) /* USCI First Stage Modulation: 9 */ +#define UCBRF_10 (0xA0) /* USCI First Stage Modulation: A */ +#define UCBRF_11 (0xB0) /* USCI First Stage Modulation: B */ +#define UCBRF_12 (0xC0) /* USCI First Stage Modulation: C */ +#define UCBRF_13 (0xD0) /* USCI First Stage Modulation: D */ +#define UCBRF_14 (0xE0) /* USCI First Stage Modulation: E */ +#define UCBRF_15 (0xF0) /* USCI First Stage Modulation: F */ + +/* UCAxSTATW Control Bits */ +#define UCLISTEN (0x0080) /* USCI Listen mode */ +#define UCFE (0x0040) /* USCI Frame Error Flag */ +#define UCOE (0x0020) /* USCI Overrun Error Flag */ +#define UCPE (0x0010) /* USCI Parity Error Flag */ +#define UCBRK (0x0008) /* USCI Break received */ +#define UCRXERR (0x0004) /* USCI RX Error Flag */ +#define UCADDR (0x0002) /* USCI Address received Flag */ +#define UCBUSY (0x0001) /* USCI Busy Flag */ +#define UCIDLE (0x0002) /* USCI Idle line detected Flag */ + +/* UCBxSTATW I2C Control Bits */ +#define UCBCNT7 (0x8000) /* USCI Byte Counter Bit 7 */ +#define UCBCNT6 (0x4000) /* USCI Byte Counter Bit 6 */ +#define UCBCNT5 (0x2000) /* USCI Byte Counter Bit 5 */ +#define UCBCNT4 (0x1000) /* USCI Byte Counter Bit 4 */ +#define UCBCNT3 (0x0800) /* USCI Byte Counter Bit 3 */ +#define UCBCNT2 (0x0400) /* USCI Byte Counter Bit 2 */ +#define UCBCNT1 (0x0200) /* USCI Byte Counter Bit 1 */ +#define UCBCNT0 (0x0100) /* USCI Byte Counter Bit 0 */ +#define UCSCLLOW (0x0040) /* SCL low */ +#define UCGC (0x0020) /* General Call address received Flag */ +#define UCBBUSY (0x0010) /* Bus Busy Flag */ + +/* UCBxTBCNT I2C Control Bits */ +#define UCTBCNT7 (0x0080) /* USCI Byte Counter Bit 7 */ +#define UCTBCNT6 (0x0040) /* USCI Byte Counter Bit 6 */ +#define UCTBCNT5 (0x0020) /* USCI Byte Counter Bit 5 */ +#define UCTBCNT4 (0x0010) /* USCI Byte Counter Bit 4 */ +#define UCTBCNT3 (0x0008) /* USCI Byte Counter Bit 3 */ +#define UCTBCNT2 (0x0004) /* USCI Byte Counter Bit 2 */ +#define UCTBCNT1 (0x0002) /* USCI Byte Counter Bit 1 */ +#define UCTBCNT0 (0x0001) /* USCI Byte Counter Bit 0 */ + +/* UCAxIRCTL Control Bits */ +#define UCIRRXFL5 (0x8000) /* IRDA Receive Filter Length 5 */ +#define UCIRRXFL4 (0x4000) /* IRDA Receive Filter Length 4 */ +#define UCIRRXFL3 (0x2000) /* IRDA Receive Filter Length 3 */ +#define UCIRRXFL2 (0x1000) /* IRDA Receive Filter Length 2 */ +#define UCIRRXFL1 (0x0800) /* IRDA Receive Filter Length 1 */ +#define UCIRRXFL0 (0x0400) /* IRDA Receive Filter Length 0 */ +#define UCIRRXPL (0x0200) /* IRDA Receive Input Polarity */ +#define UCIRRXFE (0x0100) /* IRDA Receive Filter enable */ +#define UCIRTXPL5 (0x0080) /* IRDA Transmit Pulse Length 5 */ +#define UCIRTXPL4 (0x0040) /* IRDA Transmit Pulse Length 4 */ +#define UCIRTXPL3 (0x0020) /* IRDA Transmit Pulse Length 3 */ +#define UCIRTXPL2 (0x0010) /* IRDA Transmit Pulse Length 2 */ +#define UCIRTXPL1 (0x0008) /* IRDA Transmit Pulse Length 1 */ +#define UCIRTXPL0 (0x0004) /* IRDA Transmit Pulse Length 0 */ +#define UCIRTXCLK (0x0002) /* IRDA Transmit Pulse Clock Select */ +#define UCIREN (0x0001) /* IRDA Encoder/Decoder enable */ + +/* UCAxIRCTL Control Bits */ +#define UCIRTXPL5_L (0x0080) /* IRDA Transmit Pulse Length 5 */ +#define UCIRTXPL4_L (0x0040) /* IRDA Transmit Pulse Length 4 */ +#define UCIRTXPL3_L (0x0020) /* IRDA Transmit Pulse Length 3 */ +#define UCIRTXPL2_L (0x0010) /* IRDA Transmit Pulse Length 2 */ +#define UCIRTXPL1_L (0x0008) /* IRDA Transmit Pulse Length 1 */ +#define UCIRTXPL0_L (0x0004) /* IRDA Transmit Pulse Length 0 */ +#define UCIRTXCLK_L (0x0002) /* IRDA Transmit Pulse Clock Select */ +#define UCIREN_L (0x0001) /* IRDA Encoder/Decoder enable */ + +/* UCAxIRCTL Control Bits */ +#define UCIRRXFL5_H (0x0080) /* IRDA Receive Filter Length 5 */ +#define UCIRRXFL4_H (0x0040) /* IRDA Receive Filter Length 4 */ +#define UCIRRXFL3_H (0x0020) /* IRDA Receive Filter Length 3 */ +#define UCIRRXFL2_H (0x0010) /* IRDA Receive Filter Length 2 */ +#define UCIRRXFL1_H (0x0008) /* IRDA Receive Filter Length 1 */ +#define UCIRRXFL0_H (0x0004) /* IRDA Receive Filter Length 0 */ +#define UCIRRXPL_H (0x0002) /* IRDA Receive Input Polarity */ +#define UCIRRXFE_H (0x0001) /* IRDA Receive Filter enable */ + +/* UCAxABCTL Control Bits */ +//#define res (0x80) /* reserved */ +//#define res (0x40) /* reserved */ +#define UCDELIM1 (0x20) /* Break Sync Delimiter 1 */ +#define UCDELIM0 (0x10) /* Break Sync Delimiter 0 */ +#define UCSTOE (0x08) /* Sync-Field Timeout error */ +#define UCBTOE (0x04) /* Break Timeout error */ +//#define res (0x02) /* reserved */ +#define UCABDEN (0x01) /* Auto Baud Rate detect enable */ + +/* UCBxI2COA0 Control Bits */ +#define UCGCEN (0x8000) /* I2C General Call enable */ +#define UCOAEN (0x0400) /* I2C Own Address enable */ +#define UCOA9 (0x0200) /* I2C Own Address Bit 9 */ +#define UCOA8 (0x0100) /* I2C Own Address Bit 8 */ +#define UCOA7 (0x0080) /* I2C Own Address Bit 7 */ +#define UCOA6 (0x0040) /* I2C Own Address Bit 6 */ +#define UCOA5 (0x0020) /* I2C Own Address Bit 5 */ +#define UCOA4 (0x0010) /* I2C Own Address Bit 4 */ +#define UCOA3 (0x0008) /* I2C Own Address Bit 3 */ +#define UCOA2 (0x0004) /* I2C Own Address Bit 2 */ +#define UCOA1 (0x0002) /* I2C Own Address Bit 1 */ +#define UCOA0 (0x0001) /* I2C Own Address Bit 0 */ + +/* UCBxI2COA0 Control Bits */ +#define UCOA7_L (0x0080) /* I2C Own Address Bit 7 */ +#define UCOA6_L (0x0040) /* I2C Own Address Bit 6 */ +#define UCOA5_L (0x0020) /* I2C Own Address Bit 5 */ +#define UCOA4_L (0x0010) /* I2C Own Address Bit 4 */ +#define UCOA3_L (0x0008) /* I2C Own Address Bit 3 */ +#define UCOA2_L (0x0004) /* I2C Own Address Bit 2 */ +#define UCOA1_L (0x0002) /* I2C Own Address Bit 1 */ +#define UCOA0_L (0x0001) /* I2C Own Address Bit 0 */ + +/* UCBxI2COA0 Control Bits */ +#define UCGCEN_H (0x0080) /* I2C General Call enable */ +#define UCOAEN_H (0x0004) /* I2C Own Address enable */ +#define UCOA9_H (0x0002) /* I2C Own Address Bit 9 */ +#define UCOA8_H (0x0001) /* I2C Own Address Bit 8 */ + +/* UCBxI2COAx Control Bits */ +#define UCOAEN (0x0400) /* I2C Own Address enable */ +#define UCOA9 (0x0200) /* I2C Own Address Bit 9 */ +#define UCOA8 (0x0100) /* I2C Own Address Bit 8 */ +#define UCOA7 (0x0080) /* I2C Own Address Bit 7 */ +#define UCOA6 (0x0040) /* I2C Own Address Bit 6 */ +#define UCOA5 (0x0020) /* I2C Own Address Bit 5 */ +#define UCOA4 (0x0010) /* I2C Own Address Bit 4 */ +#define UCOA3 (0x0008) /* I2C Own Address Bit 3 */ +#define UCOA2 (0x0004) /* I2C Own Address Bit 2 */ +#define UCOA1 (0x0002) /* I2C Own Address Bit 1 */ +#define UCOA0 (0x0001) /* I2C Own Address Bit 0 */ + +/* UCBxI2COAx Control Bits */ +#define UCOA7_L (0x0080) /* I2C Own Address Bit 7 */ +#define UCOA6_L (0x0040) /* I2C Own Address Bit 6 */ +#define UCOA5_L (0x0020) /* I2C Own Address Bit 5 */ +#define UCOA4_L (0x0010) /* I2C Own Address Bit 4 */ +#define UCOA3_L (0x0008) /* I2C Own Address Bit 3 */ +#define UCOA2_L (0x0004) /* I2C Own Address Bit 2 */ +#define UCOA1_L (0x0002) /* I2C Own Address Bit 1 */ +#define UCOA0_L (0x0001) /* I2C Own Address Bit 0 */ + +/* UCBxI2COAx Control Bits */ +#define UCOAEN_H (0x0004) /* I2C Own Address enable */ +#define UCOA9_H (0x0002) /* I2C Own Address Bit 9 */ +#define UCOA8_H (0x0001) /* I2C Own Address Bit 8 */ + +/* UCBxADDRX Control Bits */ +#define UCADDRX9 (0x0200) /* I2C Receive Address Bit 9 */ +#define UCADDRX8 (0x0100) /* I2C Receive Address Bit 8 */ +#define UCADDRX7 (0x0080) /* I2C Receive Address Bit 7 */ +#define UCADDRX6 (0x0040) /* I2C Receive Address Bit 6 */ +#define UCADDRX5 (0x0020) /* I2C Receive Address Bit 5 */ +#define UCADDRX4 (0x0010) /* I2C Receive Address Bit 4 */ +#define UCADDRX3 (0x0008) /* I2C Receive Address Bit 3 */ +#define UCADDRX2 (0x0004) /* I2C Receive Address Bit 2 */ +#define UCADDRX1 (0x0002) /* I2C Receive Address Bit 1 */ +#define UCADDRX0 (0x0001) /* I2C Receive Address Bit 0 */ + +/* UCBxADDRX Control Bits */ +#define UCADDRX7_L (0x0080) /* I2C Receive Address Bit 7 */ +#define UCADDRX6_L (0x0040) /* I2C Receive Address Bit 6 */ +#define UCADDRX5_L (0x0020) /* I2C Receive Address Bit 5 */ +#define UCADDRX4_L (0x0010) /* I2C Receive Address Bit 4 */ +#define UCADDRX3_L (0x0008) /* I2C Receive Address Bit 3 */ +#define UCADDRX2_L (0x0004) /* I2C Receive Address Bit 2 */ +#define UCADDRX1_L (0x0002) /* I2C Receive Address Bit 1 */ +#define UCADDRX0_L (0x0001) /* I2C Receive Address Bit 0 */ + +/* UCBxADDRX Control Bits */ +#define UCADDRX9_H (0x0002) /* I2C Receive Address Bit 9 */ +#define UCADDRX8_H (0x0001) /* I2C Receive Address Bit 8 */ + +/* UCBxADDMASK Control Bits */ +#define UCADDMASK9 (0x0200) /* I2C Address Mask Bit 9 */ +#define UCADDMASK8 (0x0100) /* I2C Address Mask Bit 8 */ +#define UCADDMASK7 (0x0080) /* I2C Address Mask Bit 7 */ +#define UCADDMASK6 (0x0040) /* I2C Address Mask Bit 6 */ +#define UCADDMASK5 (0x0020) /* I2C Address Mask Bit 5 */ +#define UCADDMASK4 (0x0010) /* I2C Address Mask Bit 4 */ +#define UCADDMASK3 (0x0008) /* I2C Address Mask Bit 3 */ +#define UCADDMASK2 (0x0004) /* I2C Address Mask Bit 2 */ +#define UCADDMASK1 (0x0002) /* I2C Address Mask Bit 1 */ +#define UCADDMASK0 (0x0001) /* I2C Address Mask Bit 0 */ + +/* UCBxADDMASK Control Bits */ +#define UCADDMASK7_L (0x0080) /* I2C Address Mask Bit 7 */ +#define UCADDMASK6_L (0x0040) /* I2C Address Mask Bit 6 */ +#define UCADDMASK5_L (0x0020) /* I2C Address Mask Bit 5 */ +#define UCADDMASK4_L (0x0010) /* I2C Address Mask Bit 4 */ +#define UCADDMASK3_L (0x0008) /* I2C Address Mask Bit 3 */ +#define UCADDMASK2_L (0x0004) /* I2C Address Mask Bit 2 */ +#define UCADDMASK1_L (0x0002) /* I2C Address Mask Bit 1 */ +#define UCADDMASK0_L (0x0001) /* I2C Address Mask Bit 0 */ + +/* UCBxADDMASK Control Bits */ +#define UCADDMASK9_H (0x0002) /* I2C Address Mask Bit 9 */ +#define UCADDMASK8_H (0x0001) /* I2C Address Mask Bit 8 */ + +/* UCBxI2CSA Control Bits */ +#define UCSA9 (0x0200) /* I2C Slave Address Bit 9 */ +#define UCSA8 (0x0100) /* I2C Slave Address Bit 8 */ +#define UCSA7 (0x0080) /* I2C Slave Address Bit 7 */ +#define UCSA6 (0x0040) /* I2C Slave Address Bit 6 */ +#define UCSA5 (0x0020) /* I2C Slave Address Bit 5 */ +#define UCSA4 (0x0010) /* I2C Slave Address Bit 4 */ +#define UCSA3 (0x0008) /* I2C Slave Address Bit 3 */ +#define UCSA2 (0x0004) /* I2C Slave Address Bit 2 */ +#define UCSA1 (0x0002) /* I2C Slave Address Bit 1 */ +#define UCSA0 (0x0001) /* I2C Slave Address Bit 0 */ + +/* UCBxI2CSA Control Bits */ +#define UCSA7_L (0x0080) /* I2C Slave Address Bit 7 */ +#define UCSA6_L (0x0040) /* I2C Slave Address Bit 6 */ +#define UCSA5_L (0x0020) /* I2C Slave Address Bit 5 */ +#define UCSA4_L (0x0010) /* I2C Slave Address Bit 4 */ +#define UCSA3_L (0x0008) /* I2C Slave Address Bit 3 */ +#define UCSA2_L (0x0004) /* I2C Slave Address Bit 2 */ +#define UCSA1_L (0x0002) /* I2C Slave Address Bit 1 */ +#define UCSA0_L (0x0001) /* I2C Slave Address Bit 0 */ + +/* UCBxI2CSA Control Bits */ +#define UCSA9_H (0x0002) /* I2C Slave Address Bit 9 */ +#define UCSA8_H (0x0001) /* I2C Slave Address Bit 8 */ + +/* UCAxIE UART Control Bits */ +#define UCTXCPTIE (0x0008) /* UART Transmit Complete Interrupt Enable */ +#define UCSTTIE (0x0004) /* UART Start Bit Interrupt Enalble */ +#define UCTXIE (0x0002) /* UART Transmit Interrupt Enable */ +#define UCRXIE (0x0001) /* UART Receive Interrupt Enable */ + +/* UCAxIE/UCBxIE SPI Control Bits */ + +/* UCBxIE I2C Control Bits */ +#define UCBIT9IE (0x4000) /* I2C Bit 9 Position Interrupt Enable 3 */ +#define UCTXIE3 (0x2000) /* I2C Transmit Interrupt Enable 3 */ +#define UCRXIE3 (0x1000) /* I2C Receive Interrupt Enable 3 */ +#define UCTXIE2 (0x0800) /* I2C Transmit Interrupt Enable 2 */ +#define UCRXIE2 (0x0400) /* I2C Receive Interrupt Enable 2 */ +#define UCTXIE1 (0x0200) /* I2C Transmit Interrupt Enable 1 */ +#define UCRXIE1 (0x0100) /* I2C Receive Interrupt Enable 1 */ +#define UCCLTOIE (0x0080) /* I2C Clock Low Timeout interrupt enable */ +#define UCBCNTIE (0x0040) /* I2C Automatic stop assertion interrupt enable */ +#define UCNACKIE (0x0020) /* I2C NACK Condition interrupt enable */ +#define UCALIE (0x0010) /* I2C Arbitration Lost interrupt enable */ +#define UCSTPIE (0x0008) /* I2C STOP Condition interrupt enable */ +#define UCSTTIE (0x0004) /* I2C START Condition interrupt enable */ +#define UCTXIE0 (0x0002) /* I2C Transmit Interrupt Enable 0 */ +#define UCRXIE0 (0x0001) /* I2C Receive Interrupt Enable 0 */ + +/* UCAxIFG UART Control Bits */ +#define UCTXCPTIFG (0x0008) /* UART Transmit Complete Interrupt Flag */ +#define UCSTTIFG (0x0004) /* UART Start Bit Interrupt Flag */ +#define UCTXIFG (0x0002) /* UART Transmit Interrupt Flag */ +#define UCRXIFG (0x0001) /* UART Receive Interrupt Flag */ + +/* UCAxIFG/UCBxIFG SPI Control Bits */ +#define UCTXIFG (0x0002) /* SPI Transmit Interrupt Flag */ +#define UCRXIFG (0x0001) /* SPI Receive Interrupt Flag */ + +/* UCBxIFG Control Bits */ +#define UCBIT9IFG (0x4000) /* I2C Bit 9 Possition Interrupt Flag 3 */ +#define UCTXIFG3 (0x2000) /* I2C Transmit Interrupt Flag 3 */ +#define UCRXIFG3 (0x1000) /* I2C Receive Interrupt Flag 3 */ +#define UCTXIFG2 (0x0800) /* I2C Transmit Interrupt Flag 2 */ +#define UCRXIFG2 (0x0400) /* I2C Receive Interrupt Flag 2 */ +#define UCTXIFG1 (0x0200) /* I2C Transmit Interrupt Flag 1 */ +#define UCRXIFG1 (0x0100) /* I2C Receive Interrupt Flag 1 */ +#define UCCLTOIFG (0x0080) /* I2C Clock low Timeout interrupt Flag */ +#define UCBCNTIFG (0x0040) /* I2C Byte counter interrupt flag */ +#define UCNACKIFG (0x0020) /* I2C NACK Condition interrupt Flag */ +#define UCALIFG (0x0010) /* I2C Arbitration Lost interrupt Flag */ +#define UCSTPIFG (0x0008) /* I2C STOP Condition interrupt Flag */ +#define UCSTTIFG (0x0004) /* I2C START Condition interrupt Flag */ +#define UCTXIFG0 (0x0002) /* I2C Transmit Interrupt Flag 0 */ +#define UCRXIFG0 (0x0001) /* I2C Receive Interrupt Flag 0 */ + +/* USCI Interrupt Vector UART Definitions */ +#define USCI_NONE (0x0000) /* No Interrupt pending */ +#define USCI_UART_UCRXIFG (0x0002) /* Interrupt Vector: UCRXIFG */ +#define USCI_UART_UCTXIFG (0x0004) /* Interrupt Vector: UCTXIFG */ +#define USCI_UART_UCSTTIFG (0x0006) /* Interrupt Vector: UCSTTIFG */ +#define USCI_UART_UCTXCPTIFG (0x0008) /* Interrupt Vector: UCTXCPTIFG */ + +/* USCI Interrupt Vector SPI Definitions */ +#define USCI_SPI_UCRXIFG (0x0002) /* Interrupt Vector: UCRXIFG */ +#define USCI_SPI_UCTXIFG (0x0004) /* Interrupt Vector: UCTXIFG */ + +/* USCI Interrupt Vector I2C Definitions */ +#define USCI_I2C_UCALIFG (0x0002) /* Interrupt Vector: I2C Mode: UCALIFG */ +#define USCI_I2C_UCNACKIFG (0x0004) /* Interrupt Vector: I2C Mode: UCNACKIFG */ +#define USCI_I2C_UCSTTIFG (0x0006) /* Interrupt Vector: I2C Mode: UCSTTIFG*/ +#define USCI_I2C_UCSTPIFG (0x0008) /* Interrupt Vector: I2C Mode: UCSTPIFG*/ +#define USCI_I2C_UCRXIFG3 (0x000A) /* Interrupt Vector: I2C Mode: UCRXIFG3 */ +#define USCI_I2C_UCTXIFG3 (0x000C) /* Interrupt Vector: I2C Mode: UCTXIFG3 */ +#define USCI_I2C_UCRXIFG2 (0x000E) /* Interrupt Vector: I2C Mode: UCRXIFG2 */ +#define USCI_I2C_UCTXIFG2 (0x0010) /* Interrupt Vector: I2C Mode: UCTXIFG2 */ +#define USCI_I2C_UCRXIFG1 (0x0012) /* Interrupt Vector: I2C Mode: UCRXIFG1 */ +#define USCI_I2C_UCTXIFG1 (0x0014) /* Interrupt Vector: I2C Mode: UCTXIFG1 */ +#define USCI_I2C_UCRXIFG0 (0x0016) /* Interrupt Vector: I2C Mode: UCRXIFG0 */ +#define USCI_I2C_UCTXIFG0 (0x0018) /* Interrupt Vector: I2C Mode: UCTXIFG0 */ +#define USCI_I2C_UCBCNTIFG (0x001A) /* Interrupt Vector: I2C Mode: UCBCNTIFG */ +#define USCI_I2C_UCCLTOIFG (0x001C) /* Interrupt Vector: I2C Mode: UCCLTOIFG */ +#define USCI_I2C_UCBIT9IFG (0x001E) /* Interrupt Vector: I2C Mode: UCBIT9IFG */ + +/************************************************************ +* WATCHDOG TIMER A +************************************************************/ +#define __MSP430_HAS_WDT_A__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_WDT_A__ 0x0150 +#define WDT_A_BASE __MSP430_BASEADDRESS_WDT_A__ + +sfr_w(WDTCTL); /* Watchdog Timer Control */ +sfr_b(WDTCTL_L); /* Watchdog Timer Control */ +sfr_b(WDTCTL_H); /* Watchdog Timer Control */ +/* The bit names have been prefixed with "WDT" */ +/* WDTCTL Control Bits */ +#define WDTIS0 (0x0001) /* WDT - Timer Interval Select 0 */ +#define WDTIS1 (0x0002) /* WDT - Timer Interval Select 1 */ +#define WDTIS2 (0x0004) /* WDT - Timer Interval Select 2 */ +#define WDTCNTCL (0x0008) /* WDT - Timer Clear */ +#define WDTTMSEL (0x0010) /* WDT - Timer Mode Select */ +#define WDTSSEL0 (0x0020) /* WDT - Timer Clock Source Select 0 */ +#define WDTSSEL1 (0x0040) /* WDT - Timer Clock Source Select 1 */ +#define WDTHOLD (0x0080) /* WDT - Timer hold */ + +/* WDTCTL Control Bits */ +#define WDTIS0_L (0x0001) /* WDT - Timer Interval Select 0 */ +#define WDTIS1_L (0x0002) /* WDT - Timer Interval Select 1 */ +#define WDTIS2_L (0x0004) /* WDT - Timer Interval Select 2 */ +#define WDTCNTCL_L (0x0008) /* WDT - Timer Clear */ +#define WDTTMSEL_L (0x0010) /* WDT - Timer Mode Select */ +#define WDTSSEL0_L (0x0020) /* WDT - Timer Clock Source Select 0 */ +#define WDTSSEL1_L (0x0040) /* WDT - Timer Clock Source Select 1 */ +#define WDTHOLD_L (0x0080) /* WDT - Timer hold */ + +#define WDTPW (0x5A00) + +#define WDTIS_0 (0x0000) /* WDT - Timer Interval Select: /2G */ +#define WDTIS_1 (0x0001) /* WDT - Timer Interval Select: /128M */ +#define WDTIS_2 (0x0002) /* WDT - Timer Interval Select: /8192k */ +#define WDTIS_3 (0x0003) /* WDT - Timer Interval Select: /512k */ +#define WDTIS_4 (0x0004) /* WDT - Timer Interval Select: /32k */ +#define WDTIS_5 (0x0005) /* WDT - Timer Interval Select: /8192 */ +#define WDTIS_6 (0x0006) /* WDT - Timer Interval Select: /512 */ +#define WDTIS_7 (0x0007) /* WDT - Timer Interval Select: /64 */ +#define WDTIS__2G (0x0000) /* WDT - Timer Interval Select: /2G */ +#define WDTIS__128M (0x0001) /* WDT - Timer Interval Select: /128M */ +#define WDTIS__8192K (0x0002) /* WDT - Timer Interval Select: /8192k */ +#define WDTIS__512K (0x0003) /* WDT - Timer Interval Select: /512k */ +#define WDTIS__32K (0x0004) /* WDT - Timer Interval Select: /32k */ +#define WDTIS__8192 (0x0005) /* WDT - Timer Interval Select: /8192 */ +#define WDTIS__512 (0x0006) /* WDT - Timer Interval Select: /512 */ +#define WDTIS__64 (0x0007) /* WDT - Timer Interval Select: /64 */ + +#define WDTSSEL_0 (0x0000) /* WDT - Timer Clock Source Select: SMCLK */ +#define WDTSSEL_1 (0x0020) /* WDT - Timer Clock Source Select: ACLK */ +#define WDTSSEL_2 (0x0040) /* WDT - Timer Clock Source Select: VLO_CLK */ +#define WDTSSEL_3 (0x0060) /* WDT - Timer Clock Source Select: reserved */ +#define WDTSSEL__SMCLK (0x0000) /* WDT - Timer Clock Source Select: SMCLK */ +#define WDTSSEL__ACLK (0x0020) /* WDT - Timer Clock Source Select: ACLK */ +#define WDTSSEL__VLO (0x0040) /* WDT - Timer Clock Source Select: VLO_CLK */ + +/* WDT-interval times [1ms] coded with Bits 0-2 */ +/* WDT is clocked by fSMCLK (assumed 1MHz) */ +#define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2) /* 32ms interval (default) */ +#define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTIS0) /* 8ms " */ +#define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTIS1) /* 0.5ms " */ +#define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTIS1+WDTIS0) /* 0.064ms " */ +/* WDT is clocked by fACLK (assumed 32KHz) */ +#define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTSSEL0) /* 1000ms " */ +#define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTSSEL0+WDTIS0) /* 250ms " */ +#define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTSSEL0+WDTIS1) /* 16ms " */ +#define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTSSEL0+WDTIS1+WDTIS0) /* 1.9ms " */ +/* Watchdog mode -> reset after expired time */ +/* WDT is clocked by fSMCLK (assumed 1MHz) */ +#define WDT_MRST_32 (WDTPW+WDTCNTCL+WDTIS2) /* 32ms interval (default) */ +#define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS2+WDTIS0) /* 8ms " */ +#define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS2+WDTIS1) /* 0.5ms " */ +#define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS2+WDTIS1+WDTIS0) /* 0.064ms " */ +/* WDT is clocked by fACLK (assumed 32KHz) */ +#define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL0+WDTIS2) /* 1000ms " */ +#define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL0+WDTIS2+WDTIS0) /* 250ms " */ +#define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL0+WDTIS2+WDTIS1) /* 16ms " */ +#define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL0+WDTIS2+WDTIS1+WDTIS0) /* 1.9ms " */ + + +/************************************************************ +* TLV Descriptors +************************************************************/ +#define __MSP430_HAS_TLV__ /* Definition to show that Module is available */ +#define TLV_BASE __MSP430_BASEADDRESS_TLV__ + +#define TLV_CRC_LENGTH (0x1A01) /* CRC length of the TLV structure */ +#define TLV_CRC_VALUE (0x1A02) /* CRC value of the TLV structure */ +#define TLV_START (0x1A08) /* Start Address of the TLV structure */ +#define TLV_END (0x1AFF) /* End Address of the TLV structure */ + +#define TLV_LDTAG (0x01) /* Legacy descriptor (1xx, 2xx, 4xx families) */ +#define TLV_PDTAG (0x02) /* Peripheral discovery descriptor */ +#define TLV_Reserved3 (0x03) /* Future usage */ +#define TLV_Reserved4 (0x04) /* Future usage */ +#define TLV_BLANK (0x05) /* Blank descriptor */ +#define TLV_Reserved6 (0x06) /* Future usage */ +#define TLV_Reserved7 (0x07) /* Serial Number */ +#define TLV_DIERECORD (0x08) /* Die Record */ +#define TLV_ADCCAL (0x11) /* ADC12 calibration */ +#define TLV_ADC12CAL (0x11) /* ADC12 calibration */ +#define TLV_ADC10CAL (0x13) /* ADC10 calibration */ +#define TLV_REFCAL (0x12) /* REF calibration */ +#define TLV_TAGEXT (0xFE) /* Tag extender */ +#define TLV_TAGEND (0xFF) // Tag End of Table + +/************************************************************ +* Interrupt Vectors (offset from 0xFF80 + 0x10 for Password) +************************************************************/ + + +#define AES256_VECTOR (31) /* 0xFFCC AES256 */ +#define RTC_VECTOR (32) /* 0xFFCE RTC */ +#define PORT4_VECTOR (33) /* 0xFFD0 Port 4 */ +#define PORT3_VECTOR (34) /* 0xFFD2 Port 3 */ +#define TIMER3_A1_VECTOR (35) /* 0xFFD4 Timer3_A2 CC1, TA */ +#define TIMER3_A0_VECTOR (36) /* 0xFFD6 Timer3_A2 CC0 */ +#define PORT2_VECTOR (37) /* 0xFFD8 Port 2 */ +#define TIMER2_A1_VECTOR (38) /* 0xFFDA Timer2_A2 CC1, TA */ +#define TIMER2_A0_VECTOR (39) /* 0xFFDC Timer2_A2 CC0 */ +#define PORT1_VECTOR (40) /* 0xFFDE Port 1 */ +#define TIMER1_A1_VECTOR (41) /* 0xFFE0 Timer1_A3 CC1-2, TA */ +#define TIMER1_A0_VECTOR (42) /* 0xFFE2 Timer1_A3 CC0 */ +#define DMA_VECTOR (43) /* 0xFFE4 DMA */ +#define USCI_A1_VECTOR (44) /* 0xFFE6 USCI A1 Receive/Transmit */ +#define TIMER0_A1_VECTOR (45) /* 0xFFE8 Timer0_A3 CC1-2, TA */ +#define TIMER0_A0_VECTOR (46) /* 0xFFEA Timer0_A3 CC0 */ +#define ADC12_VECTOR (47) /* 0xFFEC ADC */ +#define USCI_B0_VECTOR (48) /* 0xFFEE USCI B0 Receive/Transmit */ +#define USCI_A0_VECTOR (49) /* 0xFFF0 USCI A0 Receive/Transmit */ +#define WDT_VECTOR (50) /* 0xFFF2 Watchdog Timer */ +#define TIMER0_B1_VECTOR (51) /* 0xFFF4 Timer0_B7 CC1-6, TB */ +#define TIMER0_B0_VECTOR (52) /* 0xFFF6 Timer0_B7 CC0 */ +#define COMP_E_VECTOR (53) /* 0xFFF8 Comparator E */ +#define UNMI_VECTOR (54) /* 0xFFFA User Non-maskable */ +#define SYSNMI_VECTOR (55) /* 0xFFFC System Non-maskable */ +#define RESET_VECTOR ("reset") /* 0xFFFE Reset [Highest Priority] */ + +/************************************************************ +* End of Modules +************************************************************/ + +#ifdef __cplusplus +} +#endif /* extern "C" */ + +#endif /* #ifndef __MSP430FR5969 */ + diff --git a/os/common/ext/MSP430/inc/msp430fr6989.h b/os/common/ext/MSP430/inc/msp430fr6989.h new file mode 100644 index 0000000..1b25e9d --- /dev/null +++ b/os/common/ext/MSP430/inc/msp430fr6989.h @@ -0,0 +1,6315 @@ +/* ============================================================================ */ +/* Copyright (c) 2016, Texas Instruments Incorporated */ +/* All rights reserved. */ +/* */ +/* Redistribution and use in source and binary forms, with or without */ +/* modification, are permitted provided that the following conditions */ +/* are met: */ +/* */ +/* * Redistributions of source code must retain the above copyright */ +/* notice, this list of conditions and the following disclaimer. */ +/* */ +/* * Redistributions in binary form must reproduce the above copyright */ +/* notice, this list of conditions and the following disclaimer in the */ +/* documentation and/or other materials provided with the distribution. */ +/* */ +/* * Neither the name of Texas Instruments Incorporated nor the names of */ +/* its contributors may be used to endorse or promote products derived */ +/* from this software without specific prior written permission. */ +/* */ +/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */ +/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */ +/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */ +/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */ +/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */ +/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */ +/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */ +/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */ +/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */ +/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ +/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +/* ============================================================================ */ + +/******************************************************************** +* +* Standard register and bit definitions for the Texas Instruments +* MSP430 microcontroller. +* +* This file supports assembler and C development for +* MSP430FR6989 devices. +* +* Texas Instruments, Version 1.1 +* +* Rev. 1.0, Setup +* Rev. 1.1, ESI: Renamed bit ESIVCC2 to ESIVMIDEN, renamed bit ESIVSS to ESISHTSM +* +* +********************************************************************/ + +#ifndef __MSP430FR6989 +#define __MSP430FR6989 + +#define __MSP430_HAS_MSP430XV2_CPU__ /* Definition to show that it has MSP430XV2 CPU */ +#define __MSP430FR5XX_6XX_FAMILY__ + +#define __MSP430_HEADER_VERSION__ 1198 + +#ifdef __cplusplus +extern "C" { +#endif + + +/*----------------------------------------------------------------------------*/ +/* PERIPHERAL FILE MAP */ +/*----------------------------------------------------------------------------*/ + +#define __MSP430_TI_HEADERS__ + +#include <iomacros.h> + + +/************************************************************ +* STANDARD BITS +************************************************************/ + +#define BIT0 (0x0001) +#define BIT1 (0x0002) +#define BIT2 (0x0004) +#define BIT3 (0x0008) +#define BIT4 (0x0010) +#define BIT5 (0x0020) +#define BIT6 (0x0040) +#define BIT7 (0x0080) +#define BIT8 (0x0100) +#define BIT9 (0x0200) +#define BITA (0x0400) +#define BITB (0x0800) +#define BITC (0x1000) +#define BITD (0x2000) +#define BITE (0x4000) +#define BITF (0x8000) + +/************************************************************ +* STATUS REGISTER BITS +************************************************************/ + +#define C (0x0001) +#define Z (0x0002) +#define N (0x0004) +#define V (0x0100) +#define GIE (0x0008) +#define CPUOFF (0x0010) +#define OSCOFF (0x0020) +#define SCG0 (0x0040) +#define SCG1 (0x0080) + +/* Low Power Modes coded with Bits 4-7 in SR */ + +#ifndef __STDC__ /* Begin #defines for assembler */ +#define LPM0 (CPUOFF) +#define LPM1 (SCG0+CPUOFF) +#define LPM2 (SCG1+CPUOFF) +#define LPM3 (SCG1+SCG0+CPUOFF) +#define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF) +/* End #defines for assembler */ + +#else /* Begin #defines for C */ +#define LPM0_bits (CPUOFF) +#define LPM1_bits (SCG0+CPUOFF) +#define LPM2_bits (SCG1+CPUOFF) +#define LPM3_bits (SCG1+SCG0+CPUOFF) +#define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF) + +#include "in430.h" + +#define LPM0 __bis_SR_register(LPM0_bits) /* Enter Low Power Mode 0 */ +#define LPM0_EXIT __bic_SR_register_on_exit(LPM0_bits) /* Exit Low Power Mode 0 */ +#define LPM1 __bis_SR_register(LPM1_bits) /* Enter Low Power Mode 1 */ +#define LPM1_EXIT __bic_SR_register_on_exit(LPM1_bits) /* Exit Low Power Mode 1 */ +#define LPM2 __bis_SR_register(LPM2_bits) /* Enter Low Power Mode 2 */ +#define LPM2_EXIT __bic_SR_register_on_exit(LPM2_bits) /* Exit Low Power Mode 2 */ +#define LPM3 __bis_SR_register(LPM3_bits) /* Enter Low Power Mode 3 */ +#define LPM3_EXIT __bic_SR_register_on_exit(LPM3_bits) /* Exit Low Power Mode 3 */ +#define LPM4 __bis_SR_register(LPM4_bits) /* Enter Low Power Mode 4 */ +#define LPM4_EXIT __bic_SR_register_on_exit(LPM4_bits) /* Exit Low Power Mode 4 */ +#endif /* End #defines for C */ + +/************************************************************ +* PERIPHERAL FILE MAP +************************************************************/ + +/************************************************************ +* ADC12_B +************************************************************/ +#define __MSP430_HAS_ADC12_B__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_ADC12_B__ 0x0800 +#define ADC12_B_BASE __MSP430_BASEADDRESS_ADC12_B__ + +sfr_w(ADC12CTL0); /* ADC12 B Control 0 */ +sfr_b(ADC12CTL0_L); /* ADC12 B Control 0 */ +sfr_b(ADC12CTL0_H); /* ADC12 B Control 0 */ +sfr_w(ADC12CTL1); /* ADC12 B Control 1 */ +sfr_b(ADC12CTL1_L); /* ADC12 B Control 1 */ +sfr_b(ADC12CTL1_H); /* ADC12 B Control 1 */ +sfr_w(ADC12CTL2); /* ADC12 B Control 2 */ +sfr_b(ADC12CTL2_L); /* ADC12 B Control 2 */ +sfr_b(ADC12CTL2_H); /* ADC12 B Control 2 */ +sfr_w(ADC12CTL3); /* ADC12 B Control 3 */ +sfr_b(ADC12CTL3_L); /* ADC12 B Control 3 */ +sfr_b(ADC12CTL3_H); /* ADC12 B Control 3 */ +sfr_w(ADC12LO); /* ADC12 B Window Comparator High Threshold */ +sfr_b(ADC12LO_L); /* ADC12 B Window Comparator High Threshold */ +sfr_b(ADC12LO_H); /* ADC12 B Window Comparator High Threshold */ +sfr_w(ADC12HI); /* ADC12 B Window Comparator High Threshold */ +sfr_b(ADC12HI_L); /* ADC12 B Window Comparator High Threshold */ +sfr_b(ADC12HI_H); /* ADC12 B Window Comparator High Threshold */ +sfr_w(ADC12IFGR0); /* ADC12 B Interrupt Flag 0 */ +sfr_b(ADC12IFGR0_L); /* ADC12 B Interrupt Flag 0 */ +sfr_b(ADC12IFGR0_H); /* ADC12 B Interrupt Flag 0 */ +sfr_w(ADC12IFGR1); /* ADC12 B Interrupt Flag 1 */ +sfr_b(ADC12IFGR1_L); /* ADC12 B Interrupt Flag 1 */ +sfr_b(ADC12IFGR1_H); /* ADC12 B Interrupt Flag 1 */ +sfr_w(ADC12IFGR2); /* ADC12 B Interrupt Flag 2 */ +sfr_b(ADC12IFGR2_L); /* ADC12 B Interrupt Flag 2 */ +sfr_b(ADC12IFGR2_H); /* ADC12 B Interrupt Flag 2 */ +sfr_w(ADC12IER0); /* ADC12 B Interrupt Enable 0 */ +sfr_b(ADC12IER0_L); /* ADC12 B Interrupt Enable 0 */ +sfr_b(ADC12IER0_H); /* ADC12 B Interrupt Enable 0 */ +sfr_w(ADC12IER1); /* ADC12 B Interrupt Enable 1 */ +sfr_b(ADC12IER1_L); /* ADC12 B Interrupt Enable 1 */ +sfr_b(ADC12IER1_H); /* ADC12 B Interrupt Enable 1 */ +sfr_w(ADC12IER2); /* ADC12 B Interrupt Enable 2 */ +sfr_b(ADC12IER2_L); /* ADC12 B Interrupt Enable 2 */ +sfr_b(ADC12IER2_H); /* ADC12 B Interrupt Enable 2 */ +sfr_w(ADC12IV); /* ADC12 B Interrupt Vector Word */ +sfr_b(ADC12IV_L); /* ADC12 B Interrupt Vector Word */ +sfr_b(ADC12IV_H); /* ADC12 B Interrupt Vector Word */ + +sfr_w(ADC12MCTL0); /* ADC12 Memory Control 0 */ +sfr_b(ADC12MCTL0_L); /* ADC12 Memory Control 0 */ +sfr_b(ADC12MCTL0_H); /* ADC12 Memory Control 0 */ +sfr_w(ADC12MCTL1); /* ADC12 Memory Control 1 */ +sfr_b(ADC12MCTL1_L); /* ADC12 Memory Control 1 */ +sfr_b(ADC12MCTL1_H); /* ADC12 Memory Control 1 */ +sfr_w(ADC12MCTL2); /* ADC12 Memory Control 2 */ +sfr_b(ADC12MCTL2_L); /* ADC12 Memory Control 2 */ +sfr_b(ADC12MCTL2_H); /* ADC12 Memory Control 2 */ +sfr_w(ADC12MCTL3); /* ADC12 Memory Control 3 */ +sfr_b(ADC12MCTL3_L); /* ADC12 Memory Control 3 */ +sfr_b(ADC12MCTL3_H); /* ADC12 Memory Control 3 */ +sfr_w(ADC12MCTL4); /* ADC12 Memory Control 4 */ +sfr_b(ADC12MCTL4_L); /* ADC12 Memory Control 4 */ +sfr_b(ADC12MCTL4_H); /* ADC12 Memory Control 4 */ +sfr_w(ADC12MCTL5); /* ADC12 Memory Control 5 */ +sfr_b(ADC12MCTL5_L); /* ADC12 Memory Control 5 */ +sfr_b(ADC12MCTL5_H); /* ADC12 Memory Control 5 */ +sfr_w(ADC12MCTL6); /* ADC12 Memory Control 6 */ +sfr_b(ADC12MCTL6_L); /* ADC12 Memory Control 6 */ +sfr_b(ADC12MCTL6_H); /* ADC12 Memory Control 6 */ +sfr_w(ADC12MCTL7); /* ADC12 Memory Control 7 */ +sfr_b(ADC12MCTL7_L); /* ADC12 Memory Control 7 */ +sfr_b(ADC12MCTL7_H); /* ADC12 Memory Control 7 */ +sfr_w(ADC12MCTL8); /* ADC12 Memory Control 8 */ +sfr_b(ADC12MCTL8_L); /* ADC12 Memory Control 8 */ +sfr_b(ADC12MCTL8_H); /* ADC12 Memory Control 8 */ +sfr_w(ADC12MCTL9); /* ADC12 Memory Control 9 */ +sfr_b(ADC12MCTL9_L); /* ADC12 Memory Control 9 */ +sfr_b(ADC12MCTL9_H); /* ADC12 Memory Control 9 */ +sfr_w(ADC12MCTL10); /* ADC12 Memory Control 10 */ +sfr_b(ADC12MCTL10_L); /* ADC12 Memory Control 10 */ +sfr_b(ADC12MCTL10_H); /* ADC12 Memory Control 10 */ +sfr_w(ADC12MCTL11); /* ADC12 Memory Control 11 */ +sfr_b(ADC12MCTL11_L); /* ADC12 Memory Control 11 */ +sfr_b(ADC12MCTL11_H); /* ADC12 Memory Control 11 */ +sfr_w(ADC12MCTL12); /* ADC12 Memory Control 12 */ +sfr_b(ADC12MCTL12_L); /* ADC12 Memory Control 12 */ +sfr_b(ADC12MCTL12_H); /* ADC12 Memory Control 12 */ +sfr_w(ADC12MCTL13); /* ADC12 Memory Control 13 */ +sfr_b(ADC12MCTL13_L); /* ADC12 Memory Control 13 */ +sfr_b(ADC12MCTL13_H); /* ADC12 Memory Control 13 */ +sfr_w(ADC12MCTL14); /* ADC12 Memory Control 14 */ +sfr_b(ADC12MCTL14_L); /* ADC12 Memory Control 14 */ +sfr_b(ADC12MCTL14_H); /* ADC12 Memory Control 14 */ +sfr_w(ADC12MCTL15); /* ADC12 Memory Control 15 */ +sfr_b(ADC12MCTL15_L); /* ADC12 Memory Control 15 */ +sfr_b(ADC12MCTL15_H); /* ADC12 Memory Control 15 */ +sfr_w(ADC12MCTL16); /* ADC12 Memory Control 16 */ +sfr_b(ADC12MCTL16_L); /* ADC12 Memory Control 16 */ +sfr_b(ADC12MCTL16_H); /* ADC12 Memory Control 16 */ +sfr_w(ADC12MCTL17); /* ADC12 Memory Control 17 */ +sfr_b(ADC12MCTL17_L); /* ADC12 Memory Control 17 */ +sfr_b(ADC12MCTL17_H); /* ADC12 Memory Control 17 */ +sfr_w(ADC12MCTL18); /* ADC12 Memory Control 18 */ +sfr_b(ADC12MCTL18_L); /* ADC12 Memory Control 18 */ +sfr_b(ADC12MCTL18_H); /* ADC12 Memory Control 18 */ +sfr_w(ADC12MCTL19); /* ADC12 Memory Control 19 */ +sfr_b(ADC12MCTL19_L); /* ADC12 Memory Control 19 */ +sfr_b(ADC12MCTL19_H); /* ADC12 Memory Control 19 */ +sfr_w(ADC12MCTL20); /* ADC12 Memory Control 20 */ +sfr_b(ADC12MCTL20_L); /* ADC12 Memory Control 20 */ +sfr_b(ADC12MCTL20_H); /* ADC12 Memory Control 20 */ +sfr_w(ADC12MCTL21); /* ADC12 Memory Control 21 */ +sfr_b(ADC12MCTL21_L); /* ADC12 Memory Control 21 */ +sfr_b(ADC12MCTL21_H); /* ADC12 Memory Control 21 */ +sfr_w(ADC12MCTL22); /* ADC12 Memory Control 22 */ +sfr_b(ADC12MCTL22_L); /* ADC12 Memory Control 22 */ +sfr_b(ADC12MCTL22_H); /* ADC12 Memory Control 22 */ +sfr_w(ADC12MCTL23); /* ADC12 Memory Control 23 */ +sfr_b(ADC12MCTL23_L); /* ADC12 Memory Control 23 */ +sfr_b(ADC12MCTL23_H); /* ADC12 Memory Control 23 */ +sfr_w(ADC12MCTL24); /* ADC12 Memory Control 24 */ +sfr_b(ADC12MCTL24_L); /* ADC12 Memory Control 24 */ +sfr_b(ADC12MCTL24_H); /* ADC12 Memory Control 24 */ +sfr_w(ADC12MCTL25); /* ADC12 Memory Control 25 */ +sfr_b(ADC12MCTL25_L); /* ADC12 Memory Control 25 */ +sfr_b(ADC12MCTL25_H); /* ADC12 Memory Control 25 */ +sfr_w(ADC12MCTL26); /* ADC12 Memory Control 26 */ +sfr_b(ADC12MCTL26_L); /* ADC12 Memory Control 26 */ +sfr_b(ADC12MCTL26_H); /* ADC12 Memory Control 26 */ +sfr_w(ADC12MCTL27); /* ADC12 Memory Control 27 */ +sfr_b(ADC12MCTL27_L); /* ADC12 Memory Control 27 */ +sfr_b(ADC12MCTL27_H); /* ADC12 Memory Control 27 */ +sfr_w(ADC12MCTL28); /* ADC12 Memory Control 28 */ +sfr_b(ADC12MCTL28_L); /* ADC12 Memory Control 28 */ +sfr_b(ADC12MCTL28_H); /* ADC12 Memory Control 28 */ +sfr_w(ADC12MCTL29); /* ADC12 Memory Control 29 */ +sfr_b(ADC12MCTL29_L); /* ADC12 Memory Control 29 */ +sfr_b(ADC12MCTL29_H); /* ADC12 Memory Control 29 */ +sfr_w(ADC12MCTL30); /* ADC12 Memory Control 30 */ +sfr_b(ADC12MCTL30_L); /* ADC12 Memory Control 30 */ +sfr_b(ADC12MCTL30_H); /* ADC12 Memory Control 30 */ +sfr_w(ADC12MCTL31); /* ADC12 Memory Control 31 */ +sfr_b(ADC12MCTL31_L); /* ADC12 Memory Control 31 */ +sfr_b(ADC12MCTL31_H); /* ADC12 Memory Control 31 */ +#define ADC12MCTL_ ADC12MCTL /* ADC12 Memory Control */ +#ifndef __STDC__ +#define ADC12MCTL ADC12MCTL0 /* ADC12 Memory Control (for assembler) */ +#else +#define ADC12MCTL ((volatile char*) &ADC12MCTL0) /* ADC12 Memory Control (for C) */ +#endif + +sfr_w(ADC12MEM0); /* ADC12 Conversion Memory 0 */ +sfr_b(ADC12MEM0_L); /* ADC12 Conversion Memory 0 */ +sfr_b(ADC12MEM0_H); /* ADC12 Conversion Memory 0 */ +sfr_w(ADC12MEM1); /* ADC12 Conversion Memory 1 */ +sfr_b(ADC12MEM1_L); /* ADC12 Conversion Memory 1 */ +sfr_b(ADC12MEM1_H); /* ADC12 Conversion Memory 1 */ +sfr_w(ADC12MEM2); /* ADC12 Conversion Memory 2 */ +sfr_b(ADC12MEM2_L); /* ADC12 Conversion Memory 2 */ +sfr_b(ADC12MEM2_H); /* ADC12 Conversion Memory 2 */ +sfr_w(ADC12MEM3); /* ADC12 Conversion Memory 3 */ +sfr_b(ADC12MEM3_L); /* ADC12 Conversion Memory 3 */ +sfr_b(ADC12MEM3_H); /* ADC12 Conversion Memory 3 */ +sfr_w(ADC12MEM4); /* ADC12 Conversion Memory 4 */ +sfr_b(ADC12MEM4_L); /* ADC12 Conversion Memory 4 */ +sfr_b(ADC12MEM4_H); /* ADC12 Conversion Memory 4 */ +sfr_w(ADC12MEM5); /* ADC12 Conversion Memory 5 */ +sfr_b(ADC12MEM5_L); /* ADC12 Conversion Memory 5 */ +sfr_b(ADC12MEM5_H); /* ADC12 Conversion Memory 5 */ +sfr_w(ADC12MEM6); /* ADC12 Conversion Memory 6 */ +sfr_b(ADC12MEM6_L); /* ADC12 Conversion Memory 6 */ +sfr_b(ADC12MEM6_H); /* ADC12 Conversion Memory 6 */ +sfr_w(ADC12MEM7); /* ADC12 Conversion Memory 7 */ +sfr_b(ADC12MEM7_L); /* ADC12 Conversion Memory 7 */ +sfr_b(ADC12MEM7_H); /* ADC12 Conversion Memory 7 */ +sfr_w(ADC12MEM8); /* ADC12 Conversion Memory 8 */ +sfr_b(ADC12MEM8_L); /* ADC12 Conversion Memory 8 */ +sfr_b(ADC12MEM8_H); /* ADC12 Conversion Memory 8 */ +sfr_w(ADC12MEM9); /* ADC12 Conversion Memory 9 */ +sfr_b(ADC12MEM9_L); /* ADC12 Conversion Memory 9 */ +sfr_b(ADC12MEM9_H); /* ADC12 Conversion Memory 9 */ +sfr_w(ADC12MEM10); /* ADC12 Conversion Memory 10 */ +sfr_b(ADC12MEM10_L); /* ADC12 Conversion Memory 10 */ +sfr_b(ADC12MEM10_H); /* ADC12 Conversion Memory 10 */ +sfr_w(ADC12MEM11); /* ADC12 Conversion Memory 11 */ +sfr_b(ADC12MEM11_L); /* ADC12 Conversion Memory 11 */ +sfr_b(ADC12MEM11_H); /* ADC12 Conversion Memory 11 */ +sfr_w(ADC12MEM12); /* ADC12 Conversion Memory 12 */ +sfr_b(ADC12MEM12_L); /* ADC12 Conversion Memory 12 */ +sfr_b(ADC12MEM12_H); /* ADC12 Conversion Memory 12 */ +sfr_w(ADC12MEM13); /* ADC12 Conversion Memory 13 */ +sfr_b(ADC12MEM13_L); /* ADC12 Conversion Memory 13 */ +sfr_b(ADC12MEM13_H); /* ADC12 Conversion Memory 13 */ +sfr_w(ADC12MEM14); /* ADC12 Conversion Memory 14 */ +sfr_b(ADC12MEM14_L); /* ADC12 Conversion Memory 14 */ +sfr_b(ADC12MEM14_H); /* ADC12 Conversion Memory 14 */ +sfr_w(ADC12MEM15); /* ADC12 Conversion Memory 15 */ +sfr_b(ADC12MEM15_L); /* ADC12 Conversion Memory 15 */ +sfr_b(ADC12MEM15_H); /* ADC12 Conversion Memory 15 */ +sfr_w(ADC12MEM16); /* ADC12 Conversion Memory 16 */ +sfr_b(ADC12MEM16_L); /* ADC12 Conversion Memory 16 */ +sfr_b(ADC12MEM16_H); /* ADC12 Conversion Memory 16 */ +sfr_w(ADC12MEM17); /* ADC12 Conversion Memory 17 */ +sfr_b(ADC12MEM17_L); /* ADC12 Conversion Memory 17 */ +sfr_b(ADC12MEM17_H); /* ADC12 Conversion Memory 17 */ +sfr_w(ADC12MEM18); /* ADC12 Conversion Memory 18 */ +sfr_b(ADC12MEM18_L); /* ADC12 Conversion Memory 18 */ +sfr_b(ADC12MEM18_H); /* ADC12 Conversion Memory 18 */ +sfr_w(ADC12MEM19); /* ADC12 Conversion Memory 19 */ +sfr_b(ADC12MEM19_L); /* ADC12 Conversion Memory 19 */ +sfr_b(ADC12MEM19_H); /* ADC12 Conversion Memory 19 */ +sfr_w(ADC12MEM20); /* ADC12 Conversion Memory 20 */ +sfr_b(ADC12MEM20_L); /* ADC12 Conversion Memory 20 */ +sfr_b(ADC12MEM20_H); /* ADC12 Conversion Memory 20 */ +sfr_w(ADC12MEM21); /* ADC12 Conversion Memory 21 */ +sfr_b(ADC12MEM21_L); /* ADC12 Conversion Memory 21 */ +sfr_b(ADC12MEM21_H); /* ADC12 Conversion Memory 21 */ +sfr_w(ADC12MEM22); /* ADC12 Conversion Memory 22 */ +sfr_b(ADC12MEM22_L); /* ADC12 Conversion Memory 22 */ +sfr_b(ADC12MEM22_H); /* ADC12 Conversion Memory 22 */ +sfr_w(ADC12MEM23); /* ADC12 Conversion Memory 23 */ +sfr_b(ADC12MEM23_L); /* ADC12 Conversion Memory 23 */ +sfr_b(ADC12MEM23_H); /* ADC12 Conversion Memory 23 */ +sfr_w(ADC12MEM24); /* ADC12 Conversion Memory 24 */ +sfr_b(ADC12MEM24_L); /* ADC12 Conversion Memory 24 */ +sfr_b(ADC12MEM24_H); /* ADC12 Conversion Memory 24 */ +sfr_w(ADC12MEM25); /* ADC12 Conversion Memory 25 */ +sfr_b(ADC12MEM25_L); /* ADC12 Conversion Memory 25 */ +sfr_b(ADC12MEM25_H); /* ADC12 Conversion Memory 25 */ +sfr_w(ADC12MEM26); /* ADC12 Conversion Memory 26 */ +sfr_b(ADC12MEM26_L); /* ADC12 Conversion Memory 26 */ +sfr_b(ADC12MEM26_H); /* ADC12 Conversion Memory 26 */ +sfr_w(ADC12MEM27); /* ADC12 Conversion Memory 27 */ +sfr_b(ADC12MEM27_L); /* ADC12 Conversion Memory 27 */ +sfr_b(ADC12MEM27_H); /* ADC12 Conversion Memory 27 */ +sfr_w(ADC12MEM28); /* ADC12 Conversion Memory 28 */ +sfr_b(ADC12MEM28_L); /* ADC12 Conversion Memory 28 */ +sfr_b(ADC12MEM28_H); /* ADC12 Conversion Memory 28 */ +sfr_w(ADC12MEM29); /* ADC12 Conversion Memory 29 */ +sfr_b(ADC12MEM29_L); /* ADC12 Conversion Memory 29 */ +sfr_b(ADC12MEM29_H); /* ADC12 Conversion Memory 29 */ +sfr_w(ADC12MEM30); /* ADC12 Conversion Memory 30 */ +sfr_b(ADC12MEM30_L); /* ADC12 Conversion Memory 30 */ +sfr_b(ADC12MEM30_H); /* ADC12 Conversion Memory 30 */ +sfr_w(ADC12MEM31); /* ADC12 Conversion Memory 31 */ +sfr_b(ADC12MEM31_L); /* ADC12 Conversion Memory 31 */ +sfr_b(ADC12MEM31_H); /* ADC12 Conversion Memory 31 */ +#define ADC12MEM_ ADC12MEM /* ADC12 Conversion Memory */ +#ifndef __STDC__ +#define ADC12MEM ADC12MEM0 /* ADC12 Conversion Memory (for assembler) */ +#else +#define ADC12MEM ((volatile int*) &ADC12MEM0) /* ADC12 Conversion Memory (for C) */ +#endif + +/* ADC12CTL0 Control Bits */ +#define ADC12SC (0x0001) /* ADC12 Start Conversion */ +#define ADC12ENC (0x0002) /* ADC12 Enable Conversion */ +#define ADC12ON (0x0010) /* ADC12 On/enable */ +#define ADC12MSC (0x0080) /* ADC12 Multiple SampleConversion */ +#define ADC12SHT00 (0x0100) /* ADC12 Sample Hold 0 Select Bit: 0 */ +#define ADC12SHT01 (0x0200) /* ADC12 Sample Hold 0 Select Bit: 1 */ +#define ADC12SHT02 (0x0400) /* ADC12 Sample Hold 0 Select Bit: 2 */ +#define ADC12SHT03 (0x0800) /* ADC12 Sample Hold 0 Select Bit: 3 */ +#define ADC12SHT10 (0x1000) /* ADC12 Sample Hold 1 Select Bit: 0 */ +#define ADC12SHT11 (0x2000) /* ADC12 Sample Hold 1 Select Bit: 1 */ +#define ADC12SHT12 (0x4000) /* ADC12 Sample Hold 1 Select Bit: 2 */ +#define ADC12SHT13 (0x8000) /* ADC12 Sample Hold 1 Select Bit: 3 */ + +/* ADC12CTL0 Control Bits */ +#define ADC12SC_L (0x0001) /* ADC12 Start Conversion */ +#define ADC12ENC_L (0x0002) /* ADC12 Enable Conversion */ +#define ADC12ON_L (0x0010) /* ADC12 On/enable */ +#define ADC12MSC_L (0x0080) /* ADC12 Multiple SampleConversion */ + +/* ADC12CTL0 Control Bits */ +#define ADC12SHT00_H (0x0001) /* ADC12 Sample Hold 0 Select Bit: 0 */ +#define ADC12SHT01_H (0x0002) /* ADC12 Sample Hold 0 Select Bit: 1 */ +#define ADC12SHT02_H (0x0004) /* ADC12 Sample Hold 0 Select Bit: 2 */ +#define ADC12SHT03_H (0x0008) /* ADC12 Sample Hold 0 Select Bit: 3 */ +#define ADC12SHT10_H (0x0010) /* ADC12 Sample Hold 1 Select Bit: 0 */ +#define ADC12SHT11_H (0x0020) /* ADC12 Sample Hold 1 Select Bit: 1 */ +#define ADC12SHT12_H (0x0040) /* ADC12 Sample Hold 1 Select Bit: 2 */ +#define ADC12SHT13_H (0x0080) /* ADC12 Sample Hold 1 Select Bit: 3 */ + +#define ADC12SHT0_0 (0x0000) /* ADC12 Sample Hold 0 Select Bit: 0 */ +#define ADC12SHT0_1 (0x0100) /* ADC12 Sample Hold 0 Select Bit: 1 */ +#define ADC12SHT0_2 (0x0200) /* ADC12 Sample Hold 0 Select Bit: 2 */ +#define ADC12SHT0_3 (0x0300) /* ADC12 Sample Hold 0 Select Bit: 3 */ +#define ADC12SHT0_4 (0x0400) /* ADC12 Sample Hold 0 Select Bit: 4 */ +#define ADC12SHT0_5 (0x0500) /* ADC12 Sample Hold 0 Select Bit: 5 */ +#define ADC12SHT0_6 (0x0600) /* ADC12 Sample Hold 0 Select Bit: 6 */ +#define ADC12SHT0_7 (0x0700) /* ADC12 Sample Hold 0 Select Bit: 7 */ +#define ADC12SHT0_8 (0x0800) /* ADC12 Sample Hold 0 Select Bit: 8 */ +#define ADC12SHT0_9 (0x0900) /* ADC12 Sample Hold 0 Select Bit: 9 */ +#define ADC12SHT0_10 (0x0A00) /* ADC12 Sample Hold 0 Select Bit: 10 */ +#define ADC12SHT0_11 (0x0B00) /* ADC12 Sample Hold 0 Select Bit: 11 */ +#define ADC12SHT0_12 (0x0C00) /* ADC12 Sample Hold 0 Select Bit: 12 */ +#define ADC12SHT0_13 (0x0D00) /* ADC12 Sample Hold 0 Select Bit: 13 */ +#define ADC12SHT0_14 (0x0E00) /* ADC12 Sample Hold 0 Select Bit: 14 */ +#define ADC12SHT0_15 (0x0F00) /* ADC12 Sample Hold 0 Select Bit: 15 */ + +#define ADC12SHT1_0 (0x0000) /* ADC12 Sample Hold 1 Select Bit: 0 */ +#define ADC12SHT1_1 (0x1000) /* ADC12 Sample Hold 1 Select Bit: 1 */ +#define ADC12SHT1_2 (0x2000) /* ADC12 Sample Hold 1 Select Bit: 2 */ +#define ADC12SHT1_3 (0x3000) /* ADC12 Sample Hold 1 Select Bit: 3 */ +#define ADC12SHT1_4 (0x4000) /* ADC12 Sample Hold 1 Select Bit: 4 */ +#define ADC12SHT1_5 (0x5000) /* ADC12 Sample Hold 1 Select Bit: 5 */ +#define ADC12SHT1_6 (0x6000) /* ADC12 Sample Hold 1 Select Bit: 6 */ +#define ADC12SHT1_7 (0x7000) /* ADC12 Sample Hold 1 Select Bit: 7 */ +#define ADC12SHT1_8 (0x8000) /* ADC12 Sample Hold 1 Select Bit: 8 */ +#define ADC12SHT1_9 (0x9000) /* ADC12 Sample Hold 1 Select Bit: 9 */ +#define ADC12SHT1_10 (0xA000) /* ADC12 Sample Hold 1 Select Bit: 10 */ +#define ADC12SHT1_11 (0xB000) /* ADC12 Sample Hold 1 Select Bit: 11 */ +#define ADC12SHT1_12 (0xC000) /* ADC12 Sample Hold 1 Select Bit: 12 */ +#define ADC12SHT1_13 (0xD000) /* ADC12 Sample Hold 1 Select Bit: 13 */ +#define ADC12SHT1_14 (0xE000) /* ADC12 Sample Hold 1 Select Bit: 14 */ +#define ADC12SHT1_15 (0xF000) /* ADC12 Sample Hold 1 Select Bit: 15 */ + +/* ADC12CTL1 Control Bits */ +#define ADC12BUSY (0x0001) /* ADC12 Busy */ +#define ADC12CONSEQ0 (0x0002) /* ADC12 Conversion Sequence Select Bit: 0 */ +#define ADC12CONSEQ1 (0x0004) /* ADC12 Conversion Sequence Select Bit: 1 */ +#define ADC12SSEL0 (0x0008) /* ADC12 Clock Source Select Bit: 0 */ +#define ADC12SSEL1 (0x0010) /* ADC12 Clock Source Select Bit: 1 */ +#define ADC12DIV0 (0x0020) /* ADC12 Clock Divider Select Bit: 0 */ +#define ADC12DIV1 (0x0040) /* ADC12 Clock Divider Select Bit: 1 */ +#define ADC12DIV2 (0x0080) /* ADC12 Clock Divider Select Bit: 2 */ +#define ADC12ISSH (0x0100) /* ADC12 Invert Sample Hold Signal */ +#define ADC12SHP (0x0200) /* ADC12 Sample/Hold Pulse Mode */ +#define ADC12SHS0 (0x0400) /* ADC12 Sample/Hold Source Bit: 0 */ +#define ADC12SHS1 (0x0800) /* ADC12 Sample/Hold Source Bit: 1 */ +#define ADC12SHS2 (0x1000) /* ADC12 Sample/Hold Source Bit: 2 */ +#define ADC12PDIV0 (0x2000) /* ADC12 Predivider Bit: 0 */ +#define ADC12PDIV1 (0x4000) /* ADC12 Predivider Bit: 1 */ + +/* ADC12CTL1 Control Bits */ +#define ADC12BUSY_L (0x0001) /* ADC12 Busy */ +#define ADC12CONSEQ0_L (0x0002) /* ADC12 Conversion Sequence Select Bit: 0 */ +#define ADC12CONSEQ1_L (0x0004) /* ADC12 Conversion Sequence Select Bit: 1 */ +#define ADC12SSEL0_L (0x0008) /* ADC12 Clock Source Select Bit: 0 */ +#define ADC12SSEL1_L (0x0010) /* ADC12 Clock Source Select Bit: 1 */ +#define ADC12DIV0_L (0x0020) /* ADC12 Clock Divider Select Bit: 0 */ +#define ADC12DIV1_L (0x0040) /* ADC12 Clock Divider Select Bit: 1 */ +#define ADC12DIV2_L (0x0080) /* ADC12 Clock Divider Select Bit: 2 */ + +/* ADC12CTL1 Control Bits */ +#define ADC12ISSH_H (0x0001) /* ADC12 Invert Sample Hold Signal */ +#define ADC12SHP_H (0x0002) /* ADC12 Sample/Hold Pulse Mode */ +#define ADC12SHS0_H (0x0004) /* ADC12 Sample/Hold Source Bit: 0 */ +#define ADC12SHS1_H (0x0008) /* ADC12 Sample/Hold Source Bit: 1 */ +#define ADC12SHS2_H (0x0010) /* ADC12 Sample/Hold Source Bit: 2 */ +#define ADC12PDIV0_H (0x0020) /* ADC12 Predivider Bit: 0 */ +#define ADC12PDIV1_H (0x0040) /* ADC12 Predivider Bit: 1 */ + +#define ADC12CONSEQ_0 (0x0000) /* ADC12 Conversion Sequence Select: 0 */ +#define ADC12CONSEQ_1 (0x0002) /* ADC12 Conversion Sequence Select: 1 */ +#define ADC12CONSEQ_2 (0x0004) /* ADC12 Conversion Sequence Select: 2 */ +#define ADC12CONSEQ_3 (0x0006) /* ADC12 Conversion Sequence Select: 3 */ + +#define ADC12SSEL_0 (0x0000) /* ADC12 Clock Source Select: 0 */ +#define ADC12SSEL_1 (0x0008) /* ADC12 Clock Source Select: 1 */ +#define ADC12SSEL_2 (0x0010) /* ADC12 Clock Source Select: 2 */ +#define ADC12SSEL_3 (0x0018) /* ADC12 Clock Source Select: 3 */ + +#define ADC12DIV_0 (0x0000) /* ADC12 Clock Divider Select: 0 */ +#define ADC12DIV_1 (0x0020) /* ADC12 Clock Divider Select: 1 */ +#define ADC12DIV_2 (0x0040) /* ADC12 Clock Divider Select: 2 */ +#define ADC12DIV_3 (0x0060) /* ADC12 Clock Divider Select: 3 */ +#define ADC12DIV_4 (0x0080) /* ADC12 Clock Divider Select: 4 */ +#define ADC12DIV_5 (0x00A0) /* ADC12 Clock Divider Select: 5 */ +#define ADC12DIV_6 (0x00C0) /* ADC12 Clock Divider Select: 6 */ +#define ADC12DIV_7 (0x00E0) /* ADC12 Clock Divider Select: 7 */ + +#define ADC12SHS_0 (0x0000) /* ADC12 Sample/Hold Source: 0 */ +#define ADC12SHS_1 (0x0400) /* ADC12 Sample/Hold Source: 1 */ +#define ADC12SHS_2 (0x0800) /* ADC12 Sample/Hold Source: 2 */ +#define ADC12SHS_3 (0x0C00) /* ADC12 Sample/Hold Source: 3 */ +#define ADC12SHS_4 (0x1000) /* ADC12 Sample/Hold Source: 4 */ +#define ADC12SHS_5 (0x1400) /* ADC12 Sample/Hold Source: 5 */ +#define ADC12SHS_6 (0x1800) /* ADC12 Sample/Hold Source: 6 */ +#define ADC12SHS_7 (0x1C00) /* ADC12 Sample/Hold Source: 7 */ + +#define ADC12PDIV_0 (0x0000) /* ADC12 Clock predivider Select 0 */ +#define ADC12PDIV_1 (0x2000) /* ADC12 Clock predivider Select 1 */ +#define ADC12PDIV_2 (0x4000) /* ADC12 Clock predivider Select 2 */ +#define ADC12PDIV_3 (0x6000) /* ADC12 Clock predivider Select 3 */ +#define ADC12PDIV__1 (0x0000) /* ADC12 Clock predivider Select: /1 */ +#define ADC12PDIV__4 (0x2000) /* ADC12 Clock predivider Select: /4 */ +#define ADC12PDIV__32 (0x4000) /* ADC12 Clock predivider Select: /32 */ +#define ADC12PDIV__64 (0x6000) /* ADC12 Clock predivider Select: /64 */ + +/* ADC12CTL2 Control Bits */ +#define ADC12PWRMD (0x0001) /* ADC12 Power Mode */ +#define ADC12DF (0x0008) /* ADC12 Data Format */ +#define ADC12RES0 (0x0010) /* ADC12 Resolution Bit: 0 */ +#define ADC12RES1 (0x0020) /* ADC12 Resolution Bit: 1 */ + +/* ADC12CTL2 Control Bits */ +#define ADC12PWRMD_L (0x0001) /* ADC12 Power Mode */ +#define ADC12DF_L (0x0008) /* ADC12 Data Format */ +#define ADC12RES0_L (0x0010) /* ADC12 Resolution Bit: 0 */ +#define ADC12RES1_L (0x0020) /* ADC12 Resolution Bit: 1 */ + +#define ADC12RES_0 (0x0000) /* ADC12+ Resolution : 8 Bit */ +#define ADC12RES_1 (0x0010) /* ADC12+ Resolution : 10 Bit */ +#define ADC12RES_2 (0x0020) /* ADC12+ Resolution : 12 Bit */ +#define ADC12RES_3 (0x0030) /* ADC12+ Resolution : reserved */ + +#define ADC12RES__8BIT (0x0000) /* ADC12+ Resolution : 8 Bit */ +#define ADC12RES__10BIT (0x0010) /* ADC12+ Resolution : 10 Bit */ +#define ADC12RES__12BIT (0x0020) /* ADC12+ Resolution : 12 Bit */ + +/* ADC12CTL3 Control Bits */ +#define ADC12CSTARTADD0 (0x0001) /* ADC12 Conversion Start Address Bit: 0 */ +#define ADC12CSTARTADD1 (0x0002) /* ADC12 Conversion Start Address Bit: 1 */ +#define ADC12CSTARTADD2 (0x0004) /* ADC12 Conversion Start Address Bit: 2 */ +#define ADC12CSTARTADD3 (0x0008) /* ADC12 Conversion Start Address Bit: 3 */ +#define ADC12CSTARTADD4 (0x0010) /* ADC12 Conversion Start Address Bit: 4 */ +#define ADC12BATMAP (0x0040) /* ADC12 Internal AVCC/2 select */ +#define ADC12TCMAP (0x0080) /* ADC12 Internal TempSensor select */ +#define ADC12ICH0MAP (0x0100) /* ADC12 Internal Channel 0 select */ +#define ADC12ICH1MAP (0x0200) /* ADC12 Internal Channel 1 select */ +#define ADC12ICH2MAP (0x0400) /* ADC12 Internal Channel 2 select */ +#define ADC12ICH3MAP (0x0800) /* ADC12 Internal Channel 3 select */ + +/* ADC12CTL3 Control Bits */ +#define ADC12CSTARTADD0_L (0x0001) /* ADC12 Conversion Start Address Bit: 0 */ +#define ADC12CSTARTADD1_L (0x0002) /* ADC12 Conversion Start Address Bit: 1 */ +#define ADC12CSTARTADD2_L (0x0004) /* ADC12 Conversion Start Address Bit: 2 */ +#define ADC12CSTARTADD3_L (0x0008) /* ADC12 Conversion Start Address Bit: 3 */ +#define ADC12CSTARTADD4_L (0x0010) /* ADC12 Conversion Start Address Bit: 4 */ +#define ADC12BATMAP_L (0x0040) /* ADC12 Internal AVCC/2 select */ +#define ADC12TCMAP_L (0x0080) /* ADC12 Internal TempSensor select */ + +/* ADC12CTL3 Control Bits */ +#define ADC12ICH0MAP_H (0x0001) /* ADC12 Internal Channel 0 select */ +#define ADC12ICH1MAP_H (0x0002) /* ADC12 Internal Channel 1 select */ +#define ADC12ICH2MAP_H (0x0004) /* ADC12 Internal Channel 2 select */ +#define ADC12ICH3MAP_H (0x0008) /* ADC12 Internal Channel 3 select */ + +#define ADC12CSTARTADD_0 (0x0000) /* ADC12 Conversion Start Address: 0 */ +#define ADC12CSTARTADD_1 (0x0001) /* ADC12 Conversion Start Address: 1 */ +#define ADC12CSTARTADD_2 (0x0002) /* ADC12 Conversion Start Address: 2 */ +#define ADC12CSTARTADD_3 (0x0003) /* ADC12 Conversion Start Address: 3 */ +#define ADC12CSTARTADD_4 (0x0004) /* ADC12 Conversion Start Address: 4 */ +#define ADC12CSTARTADD_5 (0x0005) /* ADC12 Conversion Start Address: 5 */ +#define ADC12CSTARTADD_6 (0x0006) /* ADC12 Conversion Start Address: 6 */ +#define ADC12CSTARTADD_7 (0x0007) /* ADC12 Conversion Start Address: 7 */ +#define ADC12CSTARTADD_8 (0x0008) /* ADC12 Conversion Start Address: 8 */ +#define ADC12CSTARTADD_9 (0x0009) /* ADC12 Conversion Start Address: 9 */ +#define ADC12CSTARTADD_10 (0x000A) /* ADC12 Conversion Start Address: 10 */ +#define ADC12CSTARTADD_11 (0x000B) /* ADC12 Conversion Start Address: 11 */ +#define ADC12CSTARTADD_12 (0x000C) /* ADC12 Conversion Start Address: 12 */ +#define ADC12CSTARTADD_13 (0x000D) /* ADC12 Conversion Start Address: 13 */ +#define ADC12CSTARTADD_14 (0x000E) /* ADC12 Conversion Start Address: 14 */ +#define ADC12CSTARTADD_15 (0x000F) /* ADC12 Conversion Start Address: 15 */ +#define ADC12CSTARTADD_16 (0x0010) /* ADC12 Conversion Start Address: 16 */ +#define ADC12CSTARTADD_17 (0x0011) /* ADC12 Conversion Start Address: 17 */ +#define ADC12CSTARTADD_18 (0x0012) /* ADC12 Conversion Start Address: 18 */ +#define ADC12CSTARTADD_19 (0x0013) /* ADC12 Conversion Start Address: 19 */ +#define ADC12CSTARTADD_20 (0x0014) /* ADC12 Conversion Start Address: 20 */ +#define ADC12CSTARTADD_21 (0x0015) /* ADC12 Conversion Start Address: 21 */ +#define ADC12CSTARTADD_22 (0x0016) /* ADC12 Conversion Start Address: 22 */ +#define ADC12CSTARTADD_23 (0x0017) /* ADC12 Conversion Start Address: 23 */ +#define ADC12CSTARTADD_24 (0x0018) /* ADC12 Conversion Start Address: 24 */ +#define ADC12CSTARTADD_25 (0x0019) /* ADC12 Conversion Start Address: 25 */ +#define ADC12CSTARTADD_26 (0x001A) /* ADC12 Conversion Start Address: 26 */ +#define ADC12CSTARTADD_27 (0x001B) /* ADC12 Conversion Start Address: 27 */ +#define ADC12CSTARTADD_28 (0x001C) /* ADC12 Conversion Start Address: 28 */ +#define ADC12CSTARTADD_29 (0x001D) /* ADC12 Conversion Start Address: 29 */ +#define ADC12CSTARTADD_30 (0x001E) /* ADC12 Conversion Start Address: 30 */ +#define ADC12CSTARTADD_31 (0x001F) /* ADC12 Conversion Start Address: 31 */ + +/* ADC12MCTLx Control Bits */ +#define ADC12INCH0 (0x0001) /* ADC12 Input Channel Select Bit 0 */ +#define ADC12INCH1 (0x0002) /* ADC12 Input Channel Select Bit 1 */ +#define ADC12INCH2 (0x0004) /* ADC12 Input Channel Select Bit 2 */ +#define ADC12INCH3 (0x0008) /* ADC12 Input Channel Select Bit 3 */ +#define ADC12INCH4 (0x0010) /* ADC12 Input Channel Select Bit 4 */ +#define ADC12EOS (0x0080) /* ADC12 End of Sequence */ +#define ADC12VRSEL0 (0x0100) /* ADC12 VR Select Bit 0 */ +#define ADC12VRSEL1 (0x0200) /* ADC12 VR Select Bit 1 */ +#define ADC12VRSEL2 (0x0400) /* ADC12 VR Select Bit 2 */ +#define ADC12VRSEL3 (0x0800) /* ADC12 VR Select Bit 3 */ +#define ADC12DIF (0x2000) /* ADC12 Differential mode (only for even Registers) */ +#define ADC12WINC (0x4000) /* ADC12 Comparator window enable */ + +/* ADC12MCTLx Control Bits */ +#define ADC12INCH0_L (0x0001) /* ADC12 Input Channel Select Bit 0 */ +#define ADC12INCH1_L (0x0002) /* ADC12 Input Channel Select Bit 1 */ +#define ADC12INCH2_L (0x0004) /* ADC12 Input Channel Select Bit 2 */ +#define ADC12INCH3_L (0x0008) /* ADC12 Input Channel Select Bit 3 */ +#define ADC12INCH4_L (0x0010) /* ADC12 Input Channel Select Bit 4 */ +#define ADC12EOS_L (0x0080) /* ADC12 End of Sequence */ + +/* ADC12MCTLx Control Bits */ +#define ADC12VRSEL0_H (0x0001) /* ADC12 VR Select Bit 0 */ +#define ADC12VRSEL1_H (0x0002) /* ADC12 VR Select Bit 1 */ +#define ADC12VRSEL2_H (0x0004) /* ADC12 VR Select Bit 2 */ +#define ADC12VRSEL3_H (0x0008) /* ADC12 VR Select Bit 3 */ +#define ADC12DIF_H (0x0020) /* ADC12 Differential mode (only for even Registers) */ +#define ADC12WINC_H (0x0040) /* ADC12 Comparator window enable */ + +#define ADC12INCH_0 (0x0000) /* ADC12 Input Channel 0 */ +#define ADC12INCH_1 (0x0001) /* ADC12 Input Channel 1 */ +#define ADC12INCH_2 (0x0002) /* ADC12 Input Channel 2 */ +#define ADC12INCH_3 (0x0003) /* ADC12 Input Channel 3 */ +#define ADC12INCH_4 (0x0004) /* ADC12 Input Channel 4 */ +#define ADC12INCH_5 (0x0005) /* ADC12 Input Channel 5 */ +#define ADC12INCH_6 (0x0006) /* ADC12 Input Channel 6 */ +#define ADC12INCH_7 (0x0007) /* ADC12 Input Channel 7 */ +#define ADC12INCH_8 (0x0008) /* ADC12 Input Channel 8 */ +#define ADC12INCH_9 (0x0009) /* ADC12 Input Channel 9 */ +#define ADC12INCH_10 (0x000A) /* ADC12 Input Channel 10 */ +#define ADC12INCH_11 (0x000B) /* ADC12 Input Channel 11 */ +#define ADC12INCH_12 (0x000C) /* ADC12 Input Channel 12 */ +#define ADC12INCH_13 (0x000D) /* ADC12 Input Channel 13 */ +#define ADC12INCH_14 (0x000E) /* ADC12 Input Channel 14 */ +#define ADC12INCH_15 (0x000F) /* ADC12 Input Channel 15 */ +#define ADC12INCH_16 (0x0010) /* ADC12 Input Channel 16 */ +#define ADC12INCH_17 (0x0011) /* ADC12 Input Channel 17 */ +#define ADC12INCH_18 (0x0012) /* ADC12 Input Channel 18 */ +#define ADC12INCH_19 (0x0013) /* ADC12 Input Channel 19 */ +#define ADC12INCH_20 (0x0014) /* ADC12 Input Channel 20 */ +#define ADC12INCH_21 (0x0015) /* ADC12 Input Channel 21 */ +#define ADC12INCH_22 (0x0016) /* ADC12 Input Channel 22 */ +#define ADC12INCH_23 (0x0017) /* ADC12 Input Channel 23 */ +#define ADC12INCH_24 (0x0018) /* ADC12 Input Channel 24 */ +#define ADC12INCH_25 (0x0019) /* ADC12 Input Channel 25 */ +#define ADC12INCH_26 (0x001A) /* ADC12 Input Channel 26 */ +#define ADC12INCH_27 (0x001B) /* ADC12 Input Channel 27 */ +#define ADC12INCH_28 (0x001C) /* ADC12 Input Channel 28 */ +#define ADC12INCH_29 (0x001D) /* ADC12 Input Channel 29 */ +#define ADC12INCH_30 (0x001E) /* ADC12 Input Channel 30 */ +#define ADC12INCH_31 (0x001F) /* ADC12 Input Channel 31 */ + +#define ADC12VRSEL_0 (0x0000) /* ADC12 Select Reference 0 */ +#define ADC12VRSEL_1 (0x0100) /* ADC12 Select Reference 1 */ +#define ADC12VRSEL_2 (0x0200) /* ADC12 Select Reference 2 */ +#define ADC12VRSEL_3 (0x0300) /* ADC12 Select Reference 3 */ +#define ADC12VRSEL_4 (0x0400) /* ADC12 Select Reference 4 */ +#define ADC12VRSEL_5 (0x0500) /* ADC12 Select Reference 5 */ +#define ADC12VRSEL_6 (0x0600) /* ADC12 Select Reference 6 */ +#define ADC12VRSEL_7 (0x0700) /* ADC12 Select Reference 7 */ +#define ADC12VRSEL_8 (0x0800) /* ADC12 Select Reference 8 */ +#define ADC12VRSEL_9 (0x0900) /* ADC12 Select Reference 9 */ +#define ADC12VRSEL_10 (0x0A00) /* ADC12 Select Reference 10 */ +#define ADC12VRSEL_11 (0x0B00) /* ADC12 Select Reference 11 */ +#define ADC12VRSEL_12 (0x0C00) /* ADC12 Select Reference 12 */ +#define ADC12VRSEL_13 (0x0D00) /* ADC12 Select Reference 13 */ +#define ADC12VRSEL_14 (0x0E00) /* ADC12 Select Reference 14 */ +#define ADC12VRSEL_15 (0x0F00) /* ADC12 Select Reference 15 */ + +/* ADC12HI Control Bits */ + +/* ADC12LO Control Bits */ + +/* ADC12IER0 Control Bits */ +#define ADC12IE0 (0x0001) /* ADC12 Memory 0 Interrupt Enable */ +#define ADC12IE1 (0x0002) /* ADC12 Memory 1 Interrupt Enable */ +#define ADC12IE2 (0x0004) /* ADC12 Memory 2 Interrupt Enable */ +#define ADC12IE3 (0x0008) /* ADC12 Memory 3 Interrupt Enable */ +#define ADC12IE4 (0x0010) /* ADC12 Memory 4 Interrupt Enable */ +#define ADC12IE5 (0x0020) /* ADC12 Memory 5 Interrupt Enable */ +#define ADC12IE6 (0x0040) /* ADC12 Memory 6 Interrupt Enable */ +#define ADC12IE7 (0x0080) /* ADC12 Memory 7 Interrupt Enable */ +#define ADC12IE8 (0x0100) /* ADC12 Memory 8 Interrupt Enable */ +#define ADC12IE9 (0x0200) /* ADC12 Memory 9 Interrupt Enable */ +#define ADC12IE10 (0x0400) /* ADC12 Memory 10 Interrupt Enable */ +#define ADC12IE11 (0x0800) /* ADC12 Memory 11 Interrupt Enable */ +#define ADC12IE12 (0x1000) /* ADC12 Memory 12 Interrupt Enable */ +#define ADC12IE13 (0x2000) /* ADC12 Memory 13 Interrupt Enable */ +#define ADC12IE14 (0x4000) /* ADC12 Memory 14 Interrupt Enable */ +#define ADC12IE15 (0x8000) /* ADC12 Memory 15 Interrupt Enable */ + +/* ADC12IER0 Control Bits */ +#define ADC12IE0_L (0x0001) /* ADC12 Memory 0 Interrupt Enable */ +#define ADC12IE1_L (0x0002) /* ADC12 Memory 1 Interrupt Enable */ +#define ADC12IE2_L (0x0004) /* ADC12 Memory 2 Interrupt Enable */ +#define ADC12IE3_L (0x0008) /* ADC12 Memory 3 Interrupt Enable */ +#define ADC12IE4_L (0x0010) /* ADC12 Memory 4 Interrupt Enable */ +#define ADC12IE5_L (0x0020) /* ADC12 Memory 5 Interrupt Enable */ +#define ADC12IE6_L (0x0040) /* ADC12 Memory 6 Interrupt Enable */ +#define ADC12IE7_L (0x0080) /* ADC12 Memory 7 Interrupt Enable */ + +/* ADC12IER0 Control Bits */ +#define ADC12IE8_H (0x0001) /* ADC12 Memory 8 Interrupt Enable */ +#define ADC12IE9_H (0x0002) /* ADC12 Memory 9 Interrupt Enable */ +#define ADC12IE10_H (0x0004) /* ADC12 Memory 10 Interrupt Enable */ +#define ADC12IE11_H (0x0008) /* ADC12 Memory 11 Interrupt Enable */ +#define ADC12IE12_H (0x0010) /* ADC12 Memory 12 Interrupt Enable */ +#define ADC12IE13_H (0x0020) /* ADC12 Memory 13 Interrupt Enable */ +#define ADC12IE14_H (0x0040) /* ADC12 Memory 14 Interrupt Enable */ +#define ADC12IE15_H (0x0080) /* ADC12 Memory 15 Interrupt Enable */ + +/* ADC12IER1 Control Bits */ +#define ADC12IE16 (0x0001) /* ADC12 Memory 16 Interrupt Enable */ +#define ADC12IE17 (0x0002) /* ADC12 Memory 17 Interrupt Enable */ +#define ADC12IE18 (0x0004) /* ADC12 Memory 18 Interrupt Enable */ +#define ADC12IE19 (0x0008) /* ADC12 Memory 19 Interrupt Enable */ +#define ADC12IE20 (0x0010) /* ADC12 Memory 20 Interrupt Enable */ +#define ADC12IE21 (0x0020) /* ADC12 Memory 21 Interrupt Enable */ +#define ADC12IE22 (0x0040) /* ADC12 Memory 22 Interrupt Enable */ +#define ADC12IE23 (0x0080) /* ADC12 Memory 23 Interrupt Enable */ +#define ADC12IE24 (0x0100) /* ADC12 Memory 24 Interrupt Enable */ +#define ADC12IE25 (0x0200) /* ADC12 Memory 25 Interrupt Enable */ +#define ADC12IE26 (0x0400) /* ADC12 Memory 26 Interrupt Enable */ +#define ADC12IE27 (0x0800) /* ADC12 Memory 27 Interrupt Enable */ +#define ADC12IE28 (0x1000) /* ADC12 Memory 28 Interrupt Enable */ +#define ADC12IE29 (0x2000) /* ADC12 Memory 29 Interrupt Enable */ +#define ADC12IE30 (0x4000) /* ADC12 Memory 30 Interrupt Enable */ +#define ADC12IE31 (0x8000) /* ADC12 Memory 31 Interrupt Enable */ + +/* ADC12IER1 Control Bits */ +#define ADC12IE16_L (0x0001) /* ADC12 Memory 16 Interrupt Enable */ +#define ADC12IE17_L (0x0002) /* ADC12 Memory 17 Interrupt Enable */ +#define ADC12IE18_L (0x0004) /* ADC12 Memory 18 Interrupt Enable */ +#define ADC12IE19_L (0x0008) /* ADC12 Memory 19 Interrupt Enable */ +#define ADC12IE20_L (0x0010) /* ADC12 Memory 20 Interrupt Enable */ +#define ADC12IE21_L (0x0020) /* ADC12 Memory 21 Interrupt Enable */ +#define ADC12IE22_L (0x0040) /* ADC12 Memory 22 Interrupt Enable */ +#define ADC12IE23_L (0x0080) /* ADC12 Memory 23 Interrupt Enable */ + +/* ADC12IER1 Control Bits */ +#define ADC12IE24_H (0x0001) /* ADC12 Memory 24 Interrupt Enable */ +#define ADC12IE25_H (0x0002) /* ADC12 Memory 25 Interrupt Enable */ +#define ADC12IE26_H (0x0004) /* ADC12 Memory 26 Interrupt Enable */ +#define ADC12IE27_H (0x0008) /* ADC12 Memory 27 Interrupt Enable */ +#define ADC12IE28_H (0x0010) /* ADC12 Memory 28 Interrupt Enable */ +#define ADC12IE29_H (0x0020) /* ADC12 Memory 29 Interrupt Enable */ +#define ADC12IE30_H (0x0040) /* ADC12 Memory 30 Interrupt Enable */ +#define ADC12IE31_H (0x0080) /* ADC12 Memory 31 Interrupt Enable */ + +/* ADC12IER2 Control Bits */ +#define ADC12INIE (0x0002) /* ADC12 Interrupt enable for the inside of window of the Window comparator */ +#define ADC12LOIE (0x0004) /* ADC12 Interrupt enable for lower threshold of the Window comparator */ +#define ADC12HIIE (0x0008) /* ADC12 Interrupt enable for upper threshold of the Window comparator */ +#define ADC12OVIE (0x0010) /* ADC12 ADC12MEMx Overflow interrupt enable */ +#define ADC12TOVIE (0x0020) /* ADC12 Timer Overflow interrupt enable */ +#define ADC12RDYIE (0x0040) /* ADC12 local buffered reference ready interrupt enable */ + +/* ADC12IER2 Control Bits */ +#define ADC12INIE_L (0x0002) /* ADC12 Interrupt enable for the inside of window of the Window comparator */ +#define ADC12LOIE_L (0x0004) /* ADC12 Interrupt enable for lower threshold of the Window comparator */ +#define ADC12HIIE_L (0x0008) /* ADC12 Interrupt enable for upper threshold of the Window comparator */ +#define ADC12OVIE_L (0x0010) /* ADC12 ADC12MEMx Overflow interrupt enable */ +#define ADC12TOVIE_L (0x0020) /* ADC12 Timer Overflow interrupt enable */ +#define ADC12RDYIE_L (0x0040) /* ADC12 local buffered reference ready interrupt enable */ + +/* ADC12IFGR0 Control Bits */ +#define ADC12IFG0 (0x0001) /* ADC12 Memory 0 Interrupt Flag */ +#define ADC12IFG1 (0x0002) /* ADC12 Memory 1 Interrupt Flag */ +#define ADC12IFG2 (0x0004) /* ADC12 Memory 2 Interrupt Flag */ +#define ADC12IFG3 (0x0008) /* ADC12 Memory 3 Interrupt Flag */ +#define ADC12IFG4 (0x0010) /* ADC12 Memory 4 Interrupt Flag */ +#define ADC12IFG5 (0x0020) /* ADC12 Memory 5 Interrupt Flag */ +#define ADC12IFG6 (0x0040) /* ADC12 Memory 6 Interrupt Flag */ +#define ADC12IFG7 (0x0080) /* ADC12 Memory 7 Interrupt Flag */ +#define ADC12IFG8 (0x0100) /* ADC12 Memory 8 Interrupt Flag */ +#define ADC12IFG9 (0x0200) /* ADC12 Memory 9 Interrupt Flag */ +#define ADC12IFG10 (0x0400) /* ADC12 Memory 10 Interrupt Flag */ +#define ADC12IFG11 (0x0800) /* ADC12 Memory 11 Interrupt Flag */ +#define ADC12IFG12 (0x1000) /* ADC12 Memory 12 Interrupt Flag */ +#define ADC12IFG13 (0x2000) /* ADC12 Memory 13 Interrupt Flag */ +#define ADC12IFG14 (0x4000) /* ADC12 Memory 14 Interrupt Flag */ +#define ADC12IFG15 (0x8000) /* ADC12 Memory 15 Interrupt Flag */ + +/* ADC12IFGR0 Control Bits */ +#define ADC12IFG0_L (0x0001) /* ADC12 Memory 0 Interrupt Flag */ +#define ADC12IFG1_L (0x0002) /* ADC12 Memory 1 Interrupt Flag */ +#define ADC12IFG2_L (0x0004) /* ADC12 Memory 2 Interrupt Flag */ +#define ADC12IFG3_L (0x0008) /* ADC12 Memory 3 Interrupt Flag */ +#define ADC12IFG4_L (0x0010) /* ADC12 Memory 4 Interrupt Flag */ +#define ADC12IFG5_L (0x0020) /* ADC12 Memory 5 Interrupt Flag */ +#define ADC12IFG6_L (0x0040) /* ADC12 Memory 6 Interrupt Flag */ +#define ADC12IFG7_L (0x0080) /* ADC12 Memory 7 Interrupt Flag */ + +/* ADC12IFGR0 Control Bits */ +#define ADC12IFG8_H (0x0001) /* ADC12 Memory 8 Interrupt Flag */ +#define ADC12IFG9_H (0x0002) /* ADC12 Memory 9 Interrupt Flag */ +#define ADC12IFG10_H (0x0004) /* ADC12 Memory 10 Interrupt Flag */ +#define ADC12IFG11_H (0x0008) /* ADC12 Memory 11 Interrupt Flag */ +#define ADC12IFG12_H (0x0010) /* ADC12 Memory 12 Interrupt Flag */ +#define ADC12IFG13_H (0x0020) /* ADC12 Memory 13 Interrupt Flag */ +#define ADC12IFG14_H (0x0040) /* ADC12 Memory 14 Interrupt Flag */ +#define ADC12IFG15_H (0x0080) /* ADC12 Memory 15 Interrupt Flag */ + +/* ADC12IFGR1 Control Bits */ +#define ADC12IFG16 (0x0001) /* ADC12 Memory 16 Interrupt Flag */ +#define ADC12IFG17 (0x0002) /* ADC12 Memory 17 Interrupt Flag */ +#define ADC12IFG18 (0x0004) /* ADC12 Memory 18 Interrupt Flag */ +#define ADC12IFG19 (0x0008) /* ADC12 Memory 19 Interrupt Flag */ +#define ADC12IFG20 (0x0010) /* ADC12 Memory 20 Interrupt Flag */ +#define ADC12IFG21 (0x0020) /* ADC12 Memory 21 Interrupt Flag */ +#define ADC12IFG22 (0x0040) /* ADC12 Memory 22 Interrupt Flag */ +#define ADC12IFG23 (0x0080) /* ADC12 Memory 23 Interrupt Flag */ +#define ADC12IFG24 (0x0100) /* ADC12 Memory 24 Interrupt Flag */ +#define ADC12IFG25 (0x0200) /* ADC12 Memory 25 Interrupt Flag */ +#define ADC12IFG26 (0x0400) /* ADC12 Memory 26 Interrupt Flag */ +#define ADC12IFG27 (0x0800) /* ADC12 Memory 27 Interrupt Flag */ +#define ADC12IFG28 (0x1000) /* ADC12 Memory 28 Interrupt Flag */ +#define ADC12IFG29 (0x2000) /* ADC12 Memory 29 Interrupt Flag */ +#define ADC12IFG30 (0x4000) /* ADC12 Memory 30 Interrupt Flag */ +#define ADC12IFG31 (0x8000) /* ADC12 Memory 31 Interrupt Flag */ + +/* ADC12IFGR1 Control Bits */ +#define ADC12IFG16_L (0x0001) /* ADC12 Memory 16 Interrupt Flag */ +#define ADC12IFG17_L (0x0002) /* ADC12 Memory 17 Interrupt Flag */ +#define ADC12IFG18_L (0x0004) /* ADC12 Memory 18 Interrupt Flag */ +#define ADC12IFG19_L (0x0008) /* ADC12 Memory 19 Interrupt Flag */ +#define ADC12IFG20_L (0x0010) /* ADC12 Memory 20 Interrupt Flag */ +#define ADC12IFG21_L (0x0020) /* ADC12 Memory 21 Interrupt Flag */ +#define ADC12IFG22_L (0x0040) /* ADC12 Memory 22 Interrupt Flag */ +#define ADC12IFG23_L (0x0080) /* ADC12 Memory 23 Interrupt Flag */ + +/* ADC12IFGR1 Control Bits */ +#define ADC12IFG24_H (0x0001) /* ADC12 Memory 24 Interrupt Flag */ +#define ADC12IFG25_H (0x0002) /* ADC12 Memory 25 Interrupt Flag */ +#define ADC12IFG26_H (0x0004) /* ADC12 Memory 26 Interrupt Flag */ +#define ADC12IFG27_H (0x0008) /* ADC12 Memory 27 Interrupt Flag */ +#define ADC12IFG28_H (0x0010) /* ADC12 Memory 28 Interrupt Flag */ +#define ADC12IFG29_H (0x0020) /* ADC12 Memory 29 Interrupt Flag */ +#define ADC12IFG30_H (0x0040) /* ADC12 Memory 30 Interrupt Flag */ +#define ADC12IFG31_H (0x0080) /* ADC12 Memory 31 Interrupt Flag */ + +/* ADC12IFGR2 Control Bits */ +#define ADC12INIFG (0x0002) /* ADC12 Interrupt Flag for the inside of window of the Window comparator */ +#define ADC12LOIFG (0x0004) /* ADC12 Interrupt Flag for lower threshold of the Window comparator */ +#define ADC12HIIFG (0x0008) /* ADC12 Interrupt Flag for upper threshold of the Window comparator */ +#define ADC12OVIFG (0x0010) /* ADC12 ADC12MEMx Overflow interrupt Flag */ +#define ADC12TOVIFG (0x0020) /* ADC12 Timer Overflow interrupt Flag */ +#define ADC12RDYIFG (0x0040) /* ADC12 local buffered reference ready interrupt Flag */ + +/* ADC12IFGR2 Control Bits */ +#define ADC12INIFG_L (0x0002) /* ADC12 Interrupt Flag for the inside of window of the Window comparator */ +#define ADC12LOIFG_L (0x0004) /* ADC12 Interrupt Flag for lower threshold of the Window comparator */ +#define ADC12HIIFG_L (0x0008) /* ADC12 Interrupt Flag for upper threshold of the Window comparator */ +#define ADC12OVIFG_L (0x0010) /* ADC12 ADC12MEMx Overflow interrupt Flag */ +#define ADC12TOVIFG_L (0x0020) /* ADC12 Timer Overflow interrupt Flag */ +#define ADC12RDYIFG_L (0x0040) /* ADC12 local buffered reference ready interrupt Flag */ + +/* ADC12IV Definitions */ +#define ADC12IV_NONE (0x0000) /* No Interrupt pending */ +#define ADC12IV_ADC12OVIFG (0x0002) /* ADC12OVIFG */ +#define ADC12IV_ADC12TOVIFG (0x0004) /* ADC12TOVIFG */ +#define ADC12IV_ADC12HIIFG (0x0006) /* ADC12HIIFG */ +#define ADC12IV_ADC12LOIFG (0x0008) /* ADC12LOIFG */ +#define ADC12IV_ADC12INIFG (0x000A) /* ADC12INIFG */ +#define ADC12IV_ADC12IFG0 (0x000C) /* ADC12IFG0 */ +#define ADC12IV_ADC12IFG1 (0x000E) /* ADC12IFG1 */ +#define ADC12IV_ADC12IFG2 (0x0010) /* ADC12IFG2 */ +#define ADC12IV_ADC12IFG3 (0x0012) /* ADC12IFG3 */ +#define ADC12IV_ADC12IFG4 (0x0014) /* ADC12IFG4 */ +#define ADC12IV_ADC12IFG5 (0x0016) /* ADC12IFG5 */ +#define ADC12IV_ADC12IFG6 (0x0018) /* ADC12IFG6 */ +#define ADC12IV_ADC12IFG7 (0x001A) /* ADC12IFG7 */ +#define ADC12IV_ADC12IFG8 (0x001C) /* ADC12IFG8 */ +#define ADC12IV_ADC12IFG9 (0x001E) /* ADC12IFG9 */ +#define ADC12IV_ADC12IFG10 (0x0020) /* ADC12IFG10 */ +#define ADC12IV_ADC12IFG11 (0x0022) /* ADC12IFG11 */ +#define ADC12IV_ADC12IFG12 (0x0024) /* ADC12IFG12 */ +#define ADC12IV_ADC12IFG13 (0x0026) /* ADC12IFG13 */ +#define ADC12IV_ADC12IFG14 (0x0028) /* ADC12IFG14 */ +#define ADC12IV_ADC12IFG15 (0x002A) /* ADC12IFG15 */ +#define ADC12IV_ADC12IFG16 (0x002C) /* ADC12IFG16 */ +#define ADC12IV_ADC12IFG17 (0x002E) /* ADC12IFG17 */ +#define ADC12IV_ADC12IFG18 (0x0030) /* ADC12IFG18 */ +#define ADC12IV_ADC12IFG19 (0x0032) /* ADC12IFG19 */ +#define ADC12IV_ADC12IFG20 (0x0034) /* ADC12IFG20 */ +#define ADC12IV_ADC12IFG21 (0x0036) /* ADC12IFG21 */ +#define ADC12IV_ADC12IFG22 (0x0038) /* ADC12IFG22 */ +#define ADC12IV_ADC12IFG23 (0x003A) /* ADC12IFG23 */ +#define ADC12IV_ADC12IFG24 (0x003C) /* ADC12IFG24 */ +#define ADC12IV_ADC12IFG25 (0x003E) /* ADC12IFG25 */ +#define ADC12IV_ADC12IFG26 (0x0040) /* ADC12IFG26 */ +#define ADC12IV_ADC12IFG27 (0x0042) /* ADC12IFG27 */ +#define ADC12IV_ADC12IFG28 (0x0044) /* ADC12IFG28 */ +#define ADC12IV_ADC12IFG29 (0x0046) /* ADC12IFG29 */ +#define ADC12IV_ADC12IFG30 (0x0048) /* ADC12IFG30 */ +#define ADC12IV_ADC12IFG31 (0x004A) /* ADC12IFG31 */ +#define ADC12IV_ADC12RDYIFG (0x004C) /* ADC12RDYIFG */ + + +/************************************************************ +* AES256 Accelerator +************************************************************/ +#define __MSP430_HAS_AES256__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_AES256__ 0x09C0 +#define AES256_BASE __MSP430_BASEADDRESS_AES256__ + +sfr_w(AESACTL0); /* AES accelerator control register 0 */ +sfr_b(AESACTL0_L); /* AES accelerator control register 0 */ +sfr_b(AESACTL0_H); /* AES accelerator control register 0 */ +sfr_w(AESACTL1); /* AES accelerator control register 1 */ +sfr_b(AESACTL1_L); /* AES accelerator control register 1 */ +sfr_b(AESACTL1_H); /* AES accelerator control register 1 */ +sfr_w(AESASTAT); /* AES accelerator status register */ +sfr_b(AESASTAT_L); /* AES accelerator status register */ +sfr_b(AESASTAT_H); /* AES accelerator status register */ +sfr_w(AESAKEY); /* AES accelerator key register */ +sfr_b(AESAKEY_L); /* AES accelerator key register */ +sfr_b(AESAKEY_H); /* AES accelerator key register */ +sfr_w(AESADIN); /* AES accelerator data in register */ +sfr_b(AESADIN_L); /* AES accelerator data in register */ +sfr_b(AESADIN_H); /* AES accelerator data in register */ +sfr_w(AESADOUT); /* AES accelerator data out register */ +sfr_b(AESADOUT_L); /* AES accelerator data out register */ +sfr_b(AESADOUT_H); /* AES accelerator data out register */ +sfr_w(AESAXDIN); /* AES accelerator XORed data in register */ +sfr_b(AESAXDIN_L); /* AES accelerator XORed data in register */ +sfr_b(AESAXDIN_H); /* AES accelerator XORed data in register */ +sfr_w(AESAXIN); /* AES accelerator XORed data in register (no trigger) */ +sfr_b(AESAXIN_L); /* AES accelerator XORed data in register (no trigger) */ +sfr_b(AESAXIN_H); /* AES accelerator XORed data in register (no trigger) */ + +/* AESACTL0 Control Bits */ +#define AESOP0 (0x0001) /* AES Operation Bit: 0 */ +#define AESOP1 (0x0002) /* AES Operation Bit: 1 */ +#define AESKL0 (0x0004) /* AES Key length Bit: 0 */ +#define AESKL1 (0x0008) /* AES Key length Bit: 1 */ +#define AESTRIG (0x0010) /* AES Trigger Select */ +#define AESCM0 (0x0020) /* AES Cipher mode select Bit: 0 */ +#define AESCM1 (0x0040) /* AES Cipher mode select Bit: 1 */ +#define AESSWRST (0x0080) /* AES Software Reset */ +#define AESRDYIFG (0x0100) /* AES ready interrupt flag */ +#define AESERRFG (0x0800) /* AES Error Flag */ +#define AESRDYIE (0x1000) /* AES ready interrupt enable*/ +#define AESCMEN (0x8000) /* AES DMA cipher mode enable*/ + +/* AESACTL0 Control Bits */ +#define AESOP0_L (0x0001) /* AES Operation Bit: 0 */ +#define AESOP1_L (0x0002) /* AES Operation Bit: 1 */ +#define AESKL0_L (0x0004) /* AES Key length Bit: 0 */ +#define AESKL1_L (0x0008) /* AES Key length Bit: 1 */ +#define AESTRIG_L (0x0010) /* AES Trigger Select */ +#define AESCM0_L (0x0020) /* AES Cipher mode select Bit: 0 */ +#define AESCM1_L (0x0040) /* AES Cipher mode select Bit: 1 */ +#define AESSWRST_L (0x0080) /* AES Software Reset */ + +/* AESACTL0 Control Bits */ +#define AESRDYIFG_H (0x0001) /* AES ready interrupt flag */ +#define AESERRFG_H (0x0008) /* AES Error Flag */ +#define AESRDYIE_H (0x0010) /* AES ready interrupt enable*/ +#define AESCMEN_H (0x0080) /* AES DMA cipher mode enable*/ + +#define AESOP_0 (0x0000) /* AES Operation: Encrypt */ +#define AESOP_1 (0x0001) /* AES Operation: Decrypt (same Key) */ +#define AESOP_2 (0x0002) /* AES Operation: Generate first round Key */ +#define AESOP_3 (0x0003) /* AES Operation: Decrypt (first round Key) */ + +#define AESKL_0 (0x0000) /* AES Key length: AES128 */ +#define AESKL_1 (0x0004) /* AES Key length: AES192 */ +#define AESKL_2 (0x0008) /* AES Key length: AES256 */ +#define AESKL__128 (0x0000) /* AES Key length: AES128 */ +#define AESKL__192 (0x0004) /* AES Key length: AES192 */ +#define AESKL__256 (0x0008) /* AES Key length: AES256 */ + +#define AESCM_0 (0x0000) /* AES Cipher mode select: ECB */ +#define AESCM_1 (0x0020) /* AES Cipher mode select: CBC */ +#define AESCM_2 (0x0040) /* AES Cipher mode select: OFB */ +#define AESCM_3 (0x0060) /* AES Cipher mode select: CFB */ +#define AESCM__ECB (0x0000) /* AES Cipher mode select: ECB */ +#define AESCM__CBC (0x0020) /* AES Cipher mode select: CBC */ +#define AESCM__OFB (0x0040) /* AES Cipher mode select: OFB */ +#define AESCM__CFB (0x0060) /* AES Cipher mode select: CFB */ + +/* AESACTL1 Control Bits */ +#define AESBLKCNT0 (0x0001) /* AES Cipher Block Counter Bit: 0 */ +#define AESBLKCNT1 (0x0002) /* AES Cipher Block Counter Bit: 1 */ +#define AESBLKCNT2 (0x0004) /* AES Cipher Block Counter Bit: 2 */ +#define AESBLKCNT3 (0x0008) /* AES Cipher Block Counter Bit: 3 */ +#define AESBLKCNT4 (0x0010) /* AES Cipher Block Counter Bit: 4 */ +#define AESBLKCNT5 (0x0020) /* AES Cipher Block Counter Bit: 5 */ +#define AESBLKCNT6 (0x0040) /* AES Cipher Block Counter Bit: 6 */ +#define AESBLKCNT7 (0x0080) /* AES Cipher Block Counter Bit: 7 */ + +/* AESACTL1 Control Bits */ +#define AESBLKCNT0_L (0x0001) /* AES Cipher Block Counter Bit: 0 */ +#define AESBLKCNT1_L (0x0002) /* AES Cipher Block Counter Bit: 1 */ +#define AESBLKCNT2_L (0x0004) /* AES Cipher Block Counter Bit: 2 */ +#define AESBLKCNT3_L (0x0008) /* AES Cipher Block Counter Bit: 3 */ +#define AESBLKCNT4_L (0x0010) /* AES Cipher Block Counter Bit: 4 */ +#define AESBLKCNT5_L (0x0020) /* AES Cipher Block Counter Bit: 5 */ +#define AESBLKCNT6_L (0x0040) /* AES Cipher Block Counter Bit: 6 */ +#define AESBLKCNT7_L (0x0080) /* AES Cipher Block Counter Bit: 7 */ + +/* AESASTAT Control Bits */ +#define AESBUSY (0x0001) /* AES Busy */ +#define AESKEYWR (0x0002) /* AES All 16 bytes written to AESAKEY */ +#define AESDINWR (0x0004) /* AES All 16 bytes written to AESADIN */ +#define AESDOUTRD (0x0008) /* AES All 16 bytes read from AESADOUT */ +#define AESKEYCNT0 (0x0010) /* AES Bytes written via AESAKEY Bit: 0 */ +#define AESKEYCNT1 (0x0020) /* AES Bytes written via AESAKEY Bit: 1 */ +#define AESKEYCNT2 (0x0040) /* AES Bytes written via AESAKEY Bit: 2 */ +#define AESKEYCNT3 (0x0080) /* AES Bytes written via AESAKEY Bit: 3 */ +#define AESDINCNT0 (0x0100) /* AES Bytes written via AESADIN Bit: 0 */ +#define AESDINCNT1 (0x0200) /* AES Bytes written via AESADIN Bit: 1 */ +#define AESDINCNT2 (0x0400) /* AES Bytes written via AESADIN Bit: 2 */ +#define AESDINCNT3 (0x0800) /* AES Bytes written via AESADIN Bit: 3 */ +#define AESDOUTCNT0 (0x1000) /* AES Bytes read via AESADOUT Bit: 0 */ +#define AESDOUTCNT1 (0x2000) /* AES Bytes read via AESADOUT Bit: 1 */ +#define AESDOUTCNT2 (0x4000) /* AES Bytes read via AESADOUT Bit: 2 */ +#define AESDOUTCNT3 (0x8000) /* AES Bytes read via AESADOUT Bit: 3 */ + +/* AESASTAT Control Bits */ +#define AESBUSY_L (0x0001) /* AES Busy */ +#define AESKEYWR_L (0x0002) /* AES All 16 bytes written to AESAKEY */ +#define AESDINWR_L (0x0004) /* AES All 16 bytes written to AESADIN */ +#define AESDOUTRD_L (0x0008) /* AES All 16 bytes read from AESADOUT */ +#define AESKEYCNT0_L (0x0010) /* AES Bytes written via AESAKEY Bit: 0 */ +#define AESKEYCNT1_L (0x0020) /* AES Bytes written via AESAKEY Bit: 1 */ +#define AESKEYCNT2_L (0x0040) /* AES Bytes written via AESAKEY Bit: 2 */ +#define AESKEYCNT3_L (0x0080) /* AES Bytes written via AESAKEY Bit: 3 */ + +/* AESASTAT Control Bits */ +#define AESDINCNT0_H (0x0001) /* AES Bytes written via AESADIN Bit: 0 */ +#define AESDINCNT1_H (0x0002) /* AES Bytes written via AESADIN Bit: 1 */ +#define AESDINCNT2_H (0x0004) /* AES Bytes written via AESADIN Bit: 2 */ +#define AESDINCNT3_H (0x0008) /* AES Bytes written via AESADIN Bit: 3 */ +#define AESDOUTCNT0_H (0x0010) /* AES Bytes read via AESADOUT Bit: 0 */ +#define AESDOUTCNT1_H (0x0020) /* AES Bytes read via AESADOUT Bit: 1 */ +#define AESDOUTCNT2_H (0x0040) /* AES Bytes read via AESADOUT Bit: 2 */ +#define AESDOUTCNT3_H (0x0080) /* AES Bytes read via AESADOUT Bit: 3 */ + +/************************************************************ +* Capacitive_Touch_IO 0 +************************************************************/ +#define __MSP430_HAS_CAP_TOUCH_IO_0__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_CAP_TOUCH_IO_0__ 0x0430 +#define CAP_TOUCH_0_BASE __MSP430_BASEADDRESS_CAP_TOUCH_IO_0__ + +sfr_w(CAPTIO0CTL); /* Capacitive_Touch_IO 0 control register */ +sfr_b(CAPTIO0CTL_L); /* Capacitive_Touch_IO 0 control register */ +sfr_b(CAPTIO0CTL_H); /* Capacitive_Touch_IO 0 control register */ + +#define CAPSIO0CTL CAPTIO0CTL /* legacy define */ + +/************************************************************ +* Capacitive_Touch_IO 1 +************************************************************/ +#define __MSP430_HAS_CAP_TOUCH_IO_1__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_CAP_TOUCH_IO_1__ 0x0470 +#define CAP_TOUCH_1_BASE __MSP430_BASEADDRESS_CAP_TOUCH_IO_1__ + +sfr_w(CAPTIO1CTL); /* Capacitive_Touch_IO 1 control register */ +sfr_b(CAPTIO1CTL_L); /* Capacitive_Touch_IO 1 control register */ +sfr_b(CAPTIO1CTL_H); /* Capacitive_Touch_IO 1 control register */ + +#define CAPSIO1CTL CAPTIO1CTL /* legacy define */ + +/* CAPTIOxCTL Control Bits */ +#define CAPTIOPISEL0 (0x0002) /* CapTouchIO Pin Select Bit: 0 */ +#define CAPTIOPISEL1 (0x0004) /* CapTouchIO Pin Select Bit: 1 */ +#define CAPTIOPISEL2 (0x0008) /* CapTouchIO Pin Select Bit: 2 */ +#define CAPTIOPOSEL0 (0x0010) /* CapTouchIO Port Select Bit: 0 */ +#define CAPTIOPOSEL1 (0x0020) /* CapTouchIO Port Select Bit: 1 */ +#define CAPTIOPOSEL2 (0x0040) /* CapTouchIO Port Select Bit: 2 */ +#define CAPTIOPOSEL3 (0x0080) /* CapTouchIO Port Select Bit: 3 */ +#define CAPTIOEN (0x0100) /* CapTouchIO Enable */ +#define CAPTIO (0x0200) /* CapTouchIO state */ + +/* CAPTIOxCTL Control Bits */ +#define CAPTIOPISEL0_L (0x0002) /* CapTouchIO Pin Select Bit: 0 */ +#define CAPTIOPISEL1_L (0x0004) /* CapTouchIO Pin Select Bit: 1 */ +#define CAPTIOPISEL2_L (0x0008) /* CapTouchIO Pin Select Bit: 2 */ +#define CAPTIOPOSEL0_L (0x0010) /* CapTouchIO Port Select Bit: 0 */ +#define CAPTIOPOSEL1_L (0x0020) /* CapTouchIO Port Select Bit: 1 */ +#define CAPTIOPOSEL2_L (0x0040) /* CapTouchIO Port Select Bit: 2 */ +#define CAPTIOPOSEL3_L (0x0080) /* CapTouchIO Port Select Bit: 3 */ + +/* CAPTIOxCTL Control Bits */ +#define CAPTIOEN_H (0x0001) /* CapTouchIO Enable */ +#define CAPTIO_H (0x0002) /* CapTouchIO state */ + +/* Legacy defines */ +#define CAPSIOPISEL0 (0x0002) /* CapTouchIO Pin Select Bit: 0 */ +#define CAPSIOPISEL1 (0x0004) /* CapTouchIO Pin Select Bit: 1 */ +#define CAPSIOPISEL2 (0x0008) /* CapTouchIO Pin Select Bit: 2 */ +#define CAPSIOPOSEL0 (0x0010) /* CapTouchIO Port Select Bit: 0 */ +#define CAPSIOPOSEL1 (0x0020) /* CapTouchIO Port Select Bit: 1 */ +#define CAPSIOPOSEL2 (0x0040) /* CapTouchIO Port Select Bit: 2 */ +#define CAPSIOPOSEL3 (0x0080) /* CapTouchIO Port Select Bit: 3 */ +#define CAPSIOEN (0x0100) /* CapTouchIO Enable */ +#define CAPSIO (0x0200) /* CapTouchIO state */ + +/************************************************************ +* Comparator E +************************************************************/ +#define __MSP430_HAS_COMP_E__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_COMP_E__ 0x08C0 +#define COMP_E_BASE __MSP430_BASEADDRESS_COMP_E__ + +sfr_w(CECTL0); /* Comparator E Control Register 0 */ +sfr_b(CECTL0_L); /* Comparator E Control Register 0 */ +sfr_b(CECTL0_H); /* Comparator E Control Register 0 */ +sfr_w(CECTL1); /* Comparator E Control Register 1 */ +sfr_b(CECTL1_L); /* Comparator E Control Register 1 */ +sfr_b(CECTL1_H); /* Comparator E Control Register 1 */ +sfr_w(CECTL2); /* Comparator E Control Register 2 */ +sfr_b(CECTL2_L); /* Comparator E Control Register 2 */ +sfr_b(CECTL2_H); /* Comparator E Control Register 2 */ +sfr_w(CECTL3); /* Comparator E Control Register 3 */ +sfr_b(CECTL3_L); /* Comparator E Control Register 3 */ +sfr_b(CECTL3_H); /* Comparator E Control Register 3 */ +sfr_w(CEINT); /* Comparator E Interrupt Register */ +sfr_b(CEINT_L); /* Comparator E Interrupt Register */ +sfr_b(CEINT_H); /* Comparator E Interrupt Register */ +sfr_w(CEIV); /* Comparator E Interrupt Vector Word */ +sfr_b(CEIV_L); /* Comparator E Interrupt Vector Word */ +sfr_b(CEIV_H); /* Comparator E Interrupt Vector Word */ + +/* CECTL0 Control Bits */ +#define CEIPSEL0 (0x0001) /* Comp. E Pos. Channel Input Select 0 */ +#define CEIPSEL1 (0x0002) /* Comp. E Pos. Channel Input Select 1 */ +#define CEIPSEL2 (0x0004) /* Comp. E Pos. Channel Input Select 2 */ +#define CEIPSEL3 (0x0008) /* Comp. E Pos. Channel Input Select 3 */ +//#define RESERVED (0x0010) /* Comp. E */ +//#define RESERVED (0x0020) /* Comp. E */ +//#define RESERVED (0x0040) /* Comp. E */ +#define CEIPEN (0x0080) /* Comp. E Pos. Channel Input Enable */ +#define CEIMSEL0 (0x0100) /* Comp. E Neg. Channel Input Select 0 */ +#define CEIMSEL1 (0x0200) /* Comp. E Neg. Channel Input Select 1 */ +#define CEIMSEL2 (0x0400) /* Comp. E Neg. Channel Input Select 2 */ +#define CEIMSEL3 (0x0800) /* Comp. E Neg. Channel Input Select 3 */ +//#define RESERVED (0x1000) /* Comp. E */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +#define CEIMEN (0x8000) /* Comp. E Neg. Channel Input Enable */ + +/* CECTL0 Control Bits */ +#define CEIPSEL0_L (0x0001) /* Comp. E Pos. Channel Input Select 0 */ +#define CEIPSEL1_L (0x0002) /* Comp. E Pos. Channel Input Select 1 */ +#define CEIPSEL2_L (0x0004) /* Comp. E Pos. Channel Input Select 2 */ +#define CEIPSEL3_L (0x0008) /* Comp. E Pos. Channel Input Select 3 */ +//#define RESERVED (0x0010) /* Comp. E */ +//#define RESERVED (0x0020) /* Comp. E */ +//#define RESERVED (0x0040) /* Comp. E */ +#define CEIPEN_L (0x0080) /* Comp. E Pos. Channel Input Enable */ +//#define RESERVED (0x1000) /* Comp. E */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ + +/* CECTL0 Control Bits */ +//#define RESERVED (0x0010) /* Comp. E */ +//#define RESERVED (0x0020) /* Comp. E */ +//#define RESERVED (0x0040) /* Comp. E */ +#define CEIMSEL0_H (0x0001) /* Comp. E Neg. Channel Input Select 0 */ +#define CEIMSEL1_H (0x0002) /* Comp. E Neg. Channel Input Select 1 */ +#define CEIMSEL2_H (0x0004) /* Comp. E Neg. Channel Input Select 2 */ +#define CEIMSEL3_H (0x0008) /* Comp. E Neg. Channel Input Select 3 */ +//#define RESERVED (0x1000) /* Comp. E */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +#define CEIMEN_H (0x0080) /* Comp. E Neg. Channel Input Enable */ + +#define CEIPSEL_0 (0x0000) /* Comp. E V+ terminal Input Select: Channel 0 */ +#define CEIPSEL_1 (0x0001) /* Comp. E V+ terminal Input Select: Channel 1 */ +#define CEIPSEL_2 (0x0002) /* Comp. E V+ terminal Input Select: Channel 2 */ +#define CEIPSEL_3 (0x0003) /* Comp. E V+ terminal Input Select: Channel 3 */ +#define CEIPSEL_4 (0x0004) /* Comp. E V+ terminal Input Select: Channel 4 */ +#define CEIPSEL_5 (0x0005) /* Comp. E V+ terminal Input Select: Channel 5 */ +#define CEIPSEL_6 (0x0006) /* Comp. E V+ terminal Input Select: Channel 6 */ +#define CEIPSEL_7 (0x0007) /* Comp. E V+ terminal Input Select: Channel 7 */ +#define CEIPSEL_8 (0x0008) /* Comp. E V+ terminal Input Select: Channel 8 */ +#define CEIPSEL_9 (0x0009) /* Comp. E V+ terminal Input Select: Channel 9 */ +#define CEIPSEL_10 (0x000A) /* Comp. E V+ terminal Input Select: Channel 10 */ +#define CEIPSEL_11 (0x000B) /* Comp. E V+ terminal Input Select: Channel 11 */ +#define CEIPSEL_12 (0x000C) /* Comp. E V+ terminal Input Select: Channel 12 */ +#define CEIPSEL_13 (0x000D) /* Comp. E V+ terminal Input Select: Channel 13 */ +#define CEIPSEL_14 (0x000E) /* Comp. E V+ terminal Input Select: Channel 14 */ +#define CEIPSEL_15 (0x000F) /* Comp. E V+ terminal Input Select: Channel 15 */ + +#define CEIMSEL_0 (0x0000) /* Comp. E V- Terminal Input Select: Channel 0 */ +#define CEIMSEL_1 (0x0100) /* Comp. E V- Terminal Input Select: Channel 1 */ +#define CEIMSEL_2 (0x0200) /* Comp. E V- Terminal Input Select: Channel 2 */ +#define CEIMSEL_3 (0x0300) /* Comp. E V- Terminal Input Select: Channel 3 */ +#define CEIMSEL_4 (0x0400) /* Comp. E V- Terminal Input Select: Channel 4 */ +#define CEIMSEL_5 (0x0500) /* Comp. E V- Terminal Input Select: Channel 5 */ +#define CEIMSEL_6 (0x0600) /* Comp. E V- Terminal Input Select: Channel 6 */ +#define CEIMSEL_7 (0x0700) /* Comp. E V- Terminal Input Select: Channel 7 */ +#define CEIMSEL_8 (0x0800) /* Comp. E V- terminal Input Select: Channel 8 */ +#define CEIMSEL_9 (0x0900) /* Comp. E V- terminal Input Select: Channel 9 */ +#define CEIMSEL_10 (0x0A00) /* Comp. E V- terminal Input Select: Channel 10 */ +#define CEIMSEL_11 (0x0B00) /* Comp. E V- terminal Input Select: Channel 11 */ +#define CEIMSEL_12 (0x0C00) /* Comp. E V- terminal Input Select: Channel 12 */ +#define CEIMSEL_13 (0x0D00) /* Comp. E V- terminal Input Select: Channel 13 */ +#define CEIMSEL_14 (0x0E00) /* Comp. E V- terminal Input Select: Channel 14 */ +#define CEIMSEL_15 (0x0F00) /* Comp. E V- terminal Input Select: Channel 15 */ + +/* CECTL1 Control Bits */ +#define CEOUT (0x0001) /* Comp. E Output */ +#define CEOUTPOL (0x0002) /* Comp. E Output Polarity */ +#define CEF (0x0004) /* Comp. E Enable Output Filter */ +#define CEIES (0x0008) /* Comp. E Interrupt Edge Select */ +#define CESHORT (0x0010) /* Comp. E Input Short */ +#define CEEX (0x0020) /* Comp. E Exchange Inputs */ +#define CEFDLY0 (0x0040) /* Comp. E Filter delay Bit 0 */ +#define CEFDLY1 (0x0080) /* Comp. E Filter delay Bit 1 */ +#define CEPWRMD0 (0x0100) /* Comp. E Power mode Bit 0 */ +#define CEPWRMD1 (0x0200) /* Comp. E Power mode Bit 1 */ +#define CEON (0x0400) /* Comp. E enable */ +#define CEMRVL (0x0800) /* Comp. E CEMRV Level */ +#define CEMRVS (0x1000) /* Comp. E Output selects between VREF0 or VREF1*/ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +//#define RESERVED (0x8000) /* Comp. E */ + +/* CECTL1 Control Bits */ +#define CEOUT_L (0x0001) /* Comp. E Output */ +#define CEOUTPOL_L (0x0002) /* Comp. E Output Polarity */ +#define CEF_L (0x0004) /* Comp. E Enable Output Filter */ +#define CEIES_L (0x0008) /* Comp. E Interrupt Edge Select */ +#define CESHORT_L (0x0010) /* Comp. E Input Short */ +#define CEEX_L (0x0020) /* Comp. E Exchange Inputs */ +#define CEFDLY0_L (0x0040) /* Comp. E Filter delay Bit 0 */ +#define CEFDLY1_L (0x0080) /* Comp. E Filter delay Bit 1 */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +//#define RESERVED (0x8000) /* Comp. E */ + +/* CECTL1 Control Bits */ +#define CEPWRMD0_H (0x0001) /* Comp. E Power mode Bit 0 */ +#define CEPWRMD1_H (0x0002) /* Comp. E Power mode Bit 1 */ +#define CEON_H (0x0004) /* Comp. E enable */ +#define CEMRVL_H (0x0008) /* Comp. E CEMRV Level */ +#define CEMRVS_H (0x0010) /* Comp. E Output selects between VREF0 or VREF1*/ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +//#define RESERVED (0x8000) /* Comp. E */ + +#define CEPWRMD_0 (0x0000) /* Comp. E Power mode 0 */ +#define CEPWRMD_1 (0x0100) /* Comp. E Power mode 1 */ +#define CEPWRMD_2 (0x0200) /* Comp. E Power mode 2 */ +#define CEPWRMD_3 (0x0300) /* Comp. E Power mode 3*/ + +#define CEFDLY_0 (0x0000) /* Comp. E Filter delay 0 : 450ns */ +#define CEFDLY_1 (0x0040) /* Comp. E Filter delay 1 : 900ns */ +#define CEFDLY_2 (0x0080) /* Comp. E Filter delay 2 : 1800ns */ +#define CEFDLY_3 (0x00C0) /* Comp. E Filter delay 3 : 3600ns */ + +/* CECTL2 Control Bits */ +#define CEREF00 (0x0001) /* Comp. E Reference 0 Resistor Select Bit : 0 */ +#define CEREF01 (0x0002) /* Comp. E Reference 0 Resistor Select Bit : 1 */ +#define CEREF02 (0x0004) /* Comp. E Reference 0 Resistor Select Bit : 2 */ +#define CEREF03 (0x0008) /* Comp. E Reference 0 Resistor Select Bit : 3 */ +#define CEREF04 (0x0010) /* Comp. E Reference 0 Resistor Select Bit : 4 */ +#define CERSEL (0x0020) /* Comp. E Reference select */ +#define CERS0 (0x0040) /* Comp. E Reference Source Bit : 0 */ +#define CERS1 (0x0080) /* Comp. E Reference Source Bit : 1 */ +#define CEREF10 (0x0100) /* Comp. E Reference 1 Resistor Select Bit : 0 */ +#define CEREF11 (0x0200) /* Comp. E Reference 1 Resistor Select Bit : 1 */ +#define CEREF12 (0x0400) /* Comp. E Reference 1 Resistor Select Bit : 2 */ +#define CEREF13 (0x0800) /* Comp. E Reference 1 Resistor Select Bit : 3 */ +#define CEREF14 (0x1000) /* Comp. E Reference 1 Resistor Select Bit : 4 */ +#define CEREFL0 (0x2000) /* Comp. E Reference voltage level Bit : 0 */ +#define CEREFL1 (0x4000) /* Comp. E Reference voltage level Bit : 1 */ +#define CEREFACC (0x8000) /* Comp. E Reference Accuracy */ + +/* CECTL2 Control Bits */ +#define CEREF00_L (0x0001) /* Comp. E Reference 0 Resistor Select Bit : 0 */ +#define CEREF01_L (0x0002) /* Comp. E Reference 0 Resistor Select Bit : 1 */ +#define CEREF02_L (0x0004) /* Comp. E Reference 0 Resistor Select Bit : 2 */ +#define CEREF03_L (0x0008) /* Comp. E Reference 0 Resistor Select Bit : 3 */ +#define CEREF04_L (0x0010) /* Comp. E Reference 0 Resistor Select Bit : 4 */ +#define CERSEL_L (0x0020) /* Comp. E Reference select */ +#define CERS0_L (0x0040) /* Comp. E Reference Source Bit : 0 */ +#define CERS1_L (0x0080) /* Comp. E Reference Source Bit : 1 */ + +/* CECTL2 Control Bits */ +#define CEREF10_H (0x0001) /* Comp. E Reference 1 Resistor Select Bit : 0 */ +#define CEREF11_H (0x0002) /* Comp. E Reference 1 Resistor Select Bit : 1 */ +#define CEREF12_H (0x0004) /* Comp. E Reference 1 Resistor Select Bit : 2 */ +#define CEREF13_H (0x0008) /* Comp. E Reference 1 Resistor Select Bit : 3 */ +#define CEREF14_H (0x0010) /* Comp. E Reference 1 Resistor Select Bit : 4 */ +#define CEREFL0_H (0x0020) /* Comp. E Reference voltage level Bit : 0 */ +#define CEREFL1_H (0x0040) /* Comp. E Reference voltage level Bit : 1 */ +#define CEREFACC_H (0x0080) /* Comp. E Reference Accuracy */ + +#define CEREF0_0 (0x0000) /* Comp. E Int. Ref.0 Select 0 : 1/32 */ +#define CEREF0_1 (0x0001) /* Comp. E Int. Ref.0 Select 1 : 2/32 */ +#define CEREF0_2 (0x0002) /* Comp. E Int. Ref.0 Select 2 : 3/32 */ +#define CEREF0_3 (0x0003) /* Comp. E Int. Ref.0 Select 3 : 4/32 */ +#define CEREF0_4 (0x0004) /* Comp. E Int. Ref.0 Select 4 : 5/32 */ +#define CEREF0_5 (0x0005) /* Comp. E Int. Ref.0 Select 5 : 6/32 */ +#define CEREF0_6 (0x0006) /* Comp. E Int. Ref.0 Select 6 : 7/32 */ +#define CEREF0_7 (0x0007) /* Comp. E Int. Ref.0 Select 7 : 8/32 */ +#define CEREF0_8 (0x0008) /* Comp. E Int. Ref.0 Select 0 : 9/32 */ +#define CEREF0_9 (0x0009) /* Comp. E Int. Ref.0 Select 1 : 10/32 */ +#define CEREF0_10 (0x000A) /* Comp. E Int. Ref.0 Select 2 : 11/32 */ +#define CEREF0_11 (0x000B) /* Comp. E Int. Ref.0 Select 3 : 12/32 */ +#define CEREF0_12 (0x000C) /* Comp. E Int. Ref.0 Select 4 : 13/32 */ +#define CEREF0_13 (0x000D) /* Comp. E Int. Ref.0 Select 5 : 14/32 */ +#define CEREF0_14 (0x000E) /* Comp. E Int. Ref.0 Select 6 : 15/32 */ +#define CEREF0_15 (0x000F) /* Comp. E Int. Ref.0 Select 7 : 16/32 */ +#define CEREF0_16 (0x0010) /* Comp. E Int. Ref.0 Select 0 : 17/32 */ +#define CEREF0_17 (0x0011) /* Comp. E Int. Ref.0 Select 1 : 18/32 */ +#define CEREF0_18 (0x0012) /* Comp. E Int. Ref.0 Select 2 : 19/32 */ +#define CEREF0_19 (0x0013) /* Comp. E Int. Ref.0 Select 3 : 20/32 */ +#define CEREF0_20 (0x0014) /* Comp. E Int. Ref.0 Select 4 : 21/32 */ +#define CEREF0_21 (0x0015) /* Comp. E Int. Ref.0 Select 5 : 22/32 */ +#define CEREF0_22 (0x0016) /* Comp. E Int. Ref.0 Select 6 : 23/32 */ +#define CEREF0_23 (0x0017) /* Comp. E Int. Ref.0 Select 7 : 24/32 */ +#define CEREF0_24 (0x0018) /* Comp. E Int. Ref.0 Select 0 : 25/32 */ +#define CEREF0_25 (0x0019) /* Comp. E Int. Ref.0 Select 1 : 26/32 */ +#define CEREF0_26 (0x001A) /* Comp. E Int. Ref.0 Select 2 : 27/32 */ +#define CEREF0_27 (0x001B) /* Comp. E Int. Ref.0 Select 3 : 28/32 */ +#define CEREF0_28 (0x001C) /* Comp. E Int. Ref.0 Select 4 : 29/32 */ +#define CEREF0_29 (0x001D) /* Comp. E Int. Ref.0 Select 5 : 30/32 */ +#define CEREF0_30 (0x001E) /* Comp. E Int. Ref.0 Select 6 : 31/32 */ +#define CEREF0_31 (0x001F) /* Comp. E Int. Ref.0 Select 7 : 32/32 */ + +#define CERS_0 (0x0000) /* Comp. E Reference Source 0 : Off */ +#define CERS_1 (0x0040) /* Comp. E Reference Source 1 : Vcc */ +#define CERS_2 (0x0080) /* Comp. E Reference Source 2 : Shared Ref. */ +#define CERS_3 (0x00C0) /* Comp. E Reference Source 3 : Shared Ref. / Off */ + +#define CEREF1_0 (0x0000) /* Comp. E Int. Ref.1 Select 0 : 1/32 */ +#define CEREF1_1 (0x0100) /* Comp. E Int. Ref.1 Select 1 : 2/32 */ +#define CEREF1_2 (0x0200) /* Comp. E Int. Ref.1 Select 2 : 3/32 */ +#define CEREF1_3 (0x0300) /* Comp. E Int. Ref.1 Select 3 : 4/32 */ +#define CEREF1_4 (0x0400) /* Comp. E Int. Ref.1 Select 4 : 5/32 */ +#define CEREF1_5 (0x0500) /* Comp. E Int. Ref.1 Select 5 : 6/32 */ +#define CEREF1_6 (0x0600) /* Comp. E Int. Ref.1 Select 6 : 7/32 */ +#define CEREF1_7 (0x0700) /* Comp. E Int. Ref.1 Select 7 : 8/32 */ +#define CEREF1_8 (0x0800) /* Comp. E Int. Ref.1 Select 0 : 9/32 */ +#define CEREF1_9 (0x0900) /* Comp. E Int. Ref.1 Select 1 : 10/32 */ +#define CEREF1_10 (0x0A00) /* Comp. E Int. Ref.1 Select 2 : 11/32 */ +#define CEREF1_11 (0x0B00) /* Comp. E Int. Ref.1 Select 3 : 12/32 */ +#define CEREF1_12 (0x0C00) /* Comp. E Int. Ref.1 Select 4 : 13/32 */ +#define CEREF1_13 (0x0D00) /* Comp. E Int. Ref.1 Select 5 : 14/32 */ +#define CEREF1_14 (0x0E00) /* Comp. E Int. Ref.1 Select 6 : 15/32 */ +#define CEREF1_15 (0x0F00) /* Comp. E Int. Ref.1 Select 7 : 16/32 */ +#define CEREF1_16 (0x1000) /* Comp. E Int. Ref.1 Select 0 : 17/32 */ +#define CEREF1_17 (0x1100) /* Comp. E Int. Ref.1 Select 1 : 18/32 */ +#define CEREF1_18 (0x1200) /* Comp. E Int. Ref.1 Select 2 : 19/32 */ +#define CEREF1_19 (0x1300) /* Comp. E Int. Ref.1 Select 3 : 20/32 */ +#define CEREF1_20 (0x1400) /* Comp. E Int. Ref.1 Select 4 : 21/32 */ +#define CEREF1_21 (0x1500) /* Comp. E Int. Ref.1 Select 5 : 22/32 */ +#define CEREF1_22 (0x1600) /* Comp. E Int. Ref.1 Select 6 : 23/32 */ +#define CEREF1_23 (0x1700) /* Comp. E Int. Ref.1 Select 7 : 24/32 */ +#define CEREF1_24 (0x1800) /* Comp. E Int. Ref.1 Select 0 : 25/32 */ +#define CEREF1_25 (0x1900) /* Comp. E Int. Ref.1 Select 1 : 26/32 */ +#define CEREF1_26 (0x1A00) /* Comp. E Int. Ref.1 Select 2 : 27/32 */ +#define CEREF1_27 (0x1B00) /* Comp. E Int. Ref.1 Select 3 : 28/32 */ +#define CEREF1_28 (0x1C00) /* Comp. E Int. Ref.1 Select 4 : 29/32 */ +#define CEREF1_29 (0x1D00) /* Comp. E Int. Ref.1 Select 5 : 30/32 */ +#define CEREF1_30 (0x1E00) /* Comp. E Int. Ref.1 Select 6 : 31/32 */ +#define CEREF1_31 (0x1F00) /* Comp. E Int. Ref.1 Select 7 : 32/32 */ + +#define CEREFL_0 (0x0000) /* Comp. E Reference voltage level 0 : None */ +#define CEREFL_1 (0x2000) /* Comp. E Reference voltage level 1 : 1.2V */ +#define CEREFL_2 (0x4000) /* Comp. E Reference voltage level 2 : 2.0V */ +#define CEREFL_3 (0x6000) /* Comp. E Reference voltage level 3 : 2.5V */ + +#define CEPD0 (0x0001) /* Comp. E Disable Input Buffer of Port Register .0 */ +#define CEPD1 (0x0002) /* Comp. E Disable Input Buffer of Port Register .1 */ +#define CEPD2 (0x0004) /* Comp. E Disable Input Buffer of Port Register .2 */ +#define CEPD3 (0x0008) /* Comp. E Disable Input Buffer of Port Register .3 */ +#define CEPD4 (0x0010) /* Comp. E Disable Input Buffer of Port Register .4 */ +#define CEPD5 (0x0020) /* Comp. E Disable Input Buffer of Port Register .5 */ +#define CEPD6 (0x0040) /* Comp. E Disable Input Buffer of Port Register .6 */ +#define CEPD7 (0x0080) /* Comp. E Disable Input Buffer of Port Register .7 */ +#define CEPD8 (0x0100) /* Comp. E Disable Input Buffer of Port Register .8 */ +#define CEPD9 (0x0200) /* Comp. E Disable Input Buffer of Port Register .9 */ +#define CEPD10 (0x0400) /* Comp. E Disable Input Buffer of Port Register .10 */ +#define CEPD11 (0x0800) /* Comp. E Disable Input Buffer of Port Register .11 */ +#define CEPD12 (0x1000) /* Comp. E Disable Input Buffer of Port Register .12 */ +#define CEPD13 (0x2000) /* Comp. E Disable Input Buffer of Port Register .13 */ +#define CEPD14 (0x4000) /* Comp. E Disable Input Buffer of Port Register .14 */ +#define CEPD15 (0x8000) /* Comp. E Disable Input Buffer of Port Register .15 */ + +#define CEPD0_L (0x0001) /* Comp. E Disable Input Buffer of Port Register .0 */ +#define CEPD1_L (0x0002) /* Comp. E Disable Input Buffer of Port Register .1 */ +#define CEPD2_L (0x0004) /* Comp. E Disable Input Buffer of Port Register .2 */ +#define CEPD3_L (0x0008) /* Comp. E Disable Input Buffer of Port Register .3 */ +#define CEPD4_L (0x0010) /* Comp. E Disable Input Buffer of Port Register .4 */ +#define CEPD5_L (0x0020) /* Comp. E Disable Input Buffer of Port Register .5 */ +#define CEPD6_L (0x0040) /* Comp. E Disable Input Buffer of Port Register .6 */ +#define CEPD7_L (0x0080) /* Comp. E Disable Input Buffer of Port Register .7 */ + +#define CEPD8_H (0x0001) /* Comp. E Disable Input Buffer of Port Register .8 */ +#define CEPD9_H (0x0002) /* Comp. E Disable Input Buffer of Port Register .9 */ +#define CEPD10_H (0x0004) /* Comp. E Disable Input Buffer of Port Register .10 */ +#define CEPD11_H (0x0008) /* Comp. E Disable Input Buffer of Port Register .11 */ +#define CEPD12_H (0x0010) /* Comp. E Disable Input Buffer of Port Register .12 */ +#define CEPD13_H (0x0020) /* Comp. E Disable Input Buffer of Port Register .13 */ +#define CEPD14_H (0x0040) /* Comp. E Disable Input Buffer of Port Register .14 */ +#define CEPD15_H (0x0080) /* Comp. E Disable Input Buffer of Port Register .15 */ + +/* CEINT Control Bits */ +#define CEIFG (0x0001) /* Comp. E Interrupt Flag */ +#define CEIIFG (0x0002) /* Comp. E Interrupt Flag Inverted Polarity */ +//#define RESERVED (0x0004) /* Comp. E */ +//#define RESERVED (0x0008) /* Comp. E */ +#define CERDYIFG (0x0010) /* Comp. E Comparator_E ready interrupt flag */ +//#define RESERVED (0x0020) /* Comp. E */ +//#define RESERVED (0x0040) /* Comp. E */ +//#define RESERVED (0x0080) /* Comp. E */ +#define CEIE (0x0100) /* Comp. E Interrupt Enable */ +#define CEIIE (0x0200) /* Comp. E Interrupt Enable Inverted Polarity */ +//#define RESERVED (0x0400) /* Comp. E */ +//#define RESERVED (0x0800) /* Comp. E */ +#define CERDYIE (0x1000) /* Comp. E Comparator_E ready interrupt enable */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +//#define RESERVED (0x8000) /* Comp. E */ + +/* CEINT Control Bits */ +#define CEIFG_L (0x0001) /* Comp. E Interrupt Flag */ +#define CEIIFG_L (0x0002) /* Comp. E Interrupt Flag Inverted Polarity */ +//#define RESERVED (0x0004) /* Comp. E */ +//#define RESERVED (0x0008) /* Comp. E */ +#define CERDYIFG_L (0x0010) /* Comp. E Comparator_E ready interrupt flag */ +//#define RESERVED (0x0020) /* Comp. E */ +//#define RESERVED (0x0040) /* Comp. E */ +//#define RESERVED (0x0080) /* Comp. E */ +//#define RESERVED (0x0400) /* Comp. E */ +//#define RESERVED (0x0800) /* Comp. E */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +//#define RESERVED (0x8000) /* Comp. E */ + +/* CEINT Control Bits */ +//#define RESERVED (0x0004) /* Comp. E */ +//#define RESERVED (0x0008) /* Comp. E */ +//#define RESERVED (0x0020) /* Comp. E */ +//#define RESERVED (0x0040) /* Comp. E */ +//#define RESERVED (0x0080) /* Comp. E */ +#define CEIE_H (0x0001) /* Comp. E Interrupt Enable */ +#define CEIIE_H (0x0002) /* Comp. E Interrupt Enable Inverted Polarity */ +//#define RESERVED (0x0400) /* Comp. E */ +//#define RESERVED (0x0800) /* Comp. E */ +#define CERDYIE_H (0x0010) /* Comp. E Comparator_E ready interrupt enable */ +//#define RESERVED (0x2000) /* Comp. E */ +//#define RESERVED (0x4000) /* Comp. E */ +//#define RESERVED (0x8000) /* Comp. E */ + +/* CEIV Definitions */ +#define CEIV_NONE (0x0000) /* No Interrupt pending */ +#define CEIV_CEIFG (0x0002) /* CEIFG */ +#define CEIV_CEIIFG (0x0004) /* CEIIFG */ +#define CEIV_CERDYIFG (0x000A) /* CERDYIFG */ + +/************************************************************* +* CRC Module +*************************************************************/ +#define __MSP430_HAS_CRC__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_CRC__ 0x0150 +#define CRC_BASE __MSP430_BASEADDRESS_CRC__ + +sfr_w(CRCDI); /* CRC Data In Register */ +sfr_b(CRCDI_L); /* CRC Data In Register */ +sfr_b(CRCDI_H); /* CRC Data In Register */ +sfr_w(CRCDIRB); /* CRC data in reverse byte Register */ +sfr_b(CRCDIRB_L); /* CRC data in reverse byte Register */ +sfr_b(CRCDIRB_H); /* CRC data in reverse byte Register */ +sfr_w(CRCINIRES); /* CRC Initialisation Register and Result Register */ +sfr_b(CRCINIRES_L); /* CRC Initialisation Register and Result Register */ +sfr_b(CRCINIRES_H); /* CRC Initialisation Register and Result Register */ +sfr_w(CRCRESR); /* CRC reverse result Register */ +sfr_b(CRCRESR_L); /* CRC reverse result Register */ +sfr_b(CRCRESR_H); /* CRC reverse result Register */ + +/************************************************************* +* CRC Module +*************************************************************/ +#define __MSP430_HAS_CRC32__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_CRC32__ 0x0980 +#define CRC32_BASE __MSP430_BASEADDRESS_CRC32__ + + +//sfrl CRC32DIL0 (0x0980) /* CRC32 Data In */ +sfr_w(CRC32DIW0); /* CRC32 Data In */ +sfr_b(CRC32DIW0_L); /* CRC32 Data In */ +sfr_b(CRC32DIW0_H); /* CRC32 Data In */ +sfr_w(CRC32DIW1); /* CRC32 Data In */ +sfr_b(CRC32DIW1_L); /* CRC32 Data In */ +sfr_b(CRC32DIW1_H); /* CRC32 Data In */ +#define CRC32DIB0 CRC32DIW0_L + +//sfrl CRC32DIRBL0 (0x0984) /* CRC32 Data In Reversed Bit */ +sfr_w(CRC32DIRBW1); /* CRC32 Data In Reversed Bit */ +sfr_b(CRC32DIRBW1_L); /* CRC32 Data In Reversed Bit */ +sfr_b(CRC32DIRBW1_H); /* CRC32 Data In Reversed Bit */ +sfr_w(CRC32DIRBW0); /* CRC32 Data In Reversed Bit */ +sfr_b(CRC32DIRBW0_L); /* CRC32 Data In Reversed Bit */ +sfr_b(CRC32DIRBW0_H); /* CRC32 Data In Reversed Bit */ +#define CRC32DIRBB0 CRC32DIRBW0_H + +//sfrl CRC32INIRESL0 (0x0988) /* CRC32 Initialization and Result */ +sfr_w(CRC32INIRESW0); /* CRC32 Initialization and Result */ +sfr_b(CRC32INIRESW0_L); /* CRC32 Initialization and Result */ +sfr_b(CRC32INIRESW0_H); /* CRC32 Initialization and Result */ +sfr_w(CRC32INIRESW1); /* CRC32 Initialization and Result */ +sfr_b(CRC32INIRESW1_L); /* CRC32 Initialization and Result */ +sfr_b(CRC32INIRESW1_H); /* CRC32 Initialization and Result */ +#define CRC32RESB0 CRC32INIRESW0_L +#define CRC32RESB1 CRC32INIRESW0_H +#define CRC32RESB2 CRC32INIRESW1_L +#define CRC32RESB3 CRC32INIRESW1_H + +//sfrl CRC32RESRL0 (0x098C) /* CRC32 Result Reverse */ +sfr_w(CRC32RESRW1); /* CRC32 Result Reverse */ +sfr_b(CRC32RESRW1_L); /* CRC32 Result Reverse */ +sfr_b(CRC32RESRW1_H); /* CRC32 Result Reverse */ +sfr_w(CRC32RESRW0); /* CRC32 Result Reverse */ +sfr_b(CRC32RESRW0_L); /* CRC32 Result Reverse */ +sfr_b(CRC32RESRW0_H); /* CRC32 Result Reverse */ +#define CRC32RESRB3 CRC32RESRW1_L +#define CRC32RESRB2 CRC32RESRW1_H +#define CRC32RESRB1 CRC32RESRW0_L +#define CRC32RESRB0 CRC32RESRW0_H + +//sfrl CRC16DIL0 (0x0990) /* CRC16 Data Input */ +sfr_w(CRC16DIW0); /* CRC16 Data Input */ +sfr_b(CRC16DIW0_L); /* CRC16 Data Input */ +sfr_b(CRC16DIW0_H); /* CRC16 Data Input */ +sfr_w(CRC16DIW1); /* CRC16 Data Input */ +sfr_b(CRC16DIW1_L); /* CRC16 Data Input */ +sfr_b(CRC16DIW1_H); /* CRC16 Data Input */ +#define CRC16DIB0 CRC16DIW0_L +//sfrl CRC16DIRBL0 (0x0994) /* CRC16 Data In Reverse */ +sfr_w(CRC16DIRBW1); /* CRC16 Data In Reverse */ +sfr_b(CRC16DIRBW1_L); /* CRC16 Data In Reverse */ +sfr_b(CRC16DIRBW1_H); /* CRC16 Data In Reverse */ +sfr_w(CRC16DIRBW0); /* CRC16 Data In Reverse */ +sfr_b(CRC16DIRBW0_L); /* CRC16 Data In Reverse */ +sfr_b(CRC16DIRBW0_H); /* CRC16 Data In Reverse */ +#define CRC16DIRBB0 CRC16DIRBW0_L + +//sfrl CRC16INIRESL0 (0x0998) /* CRC16 Init and Result */ +sfr_w(CRC16INIRESW0); /* CRC16 Init and Result */ +sfr_b(CRC16INIRESW0_L); /* CRC16 Init and Result */ +sfr_b(CRC16INIRESW0_H); /* CRC16 Init and Result */ +#define CRC16INIRESB1 CRC16INIRESW0_H +#define CRC16INIRESB0 CRC16INIRESW0_L + +//sfrl CRC16RESRL0 (0x099E) /* CRC16 Result Reverse */ +sfr_w(CRC16RESRW0); /* CRC16 Result Reverse */ +sfr_b(CRC16RESRW0_L); /* CRC16 Result Reverse */ +sfr_b(CRC16RESRW0_H); /* CRC16 Result Reverse */ +sfr_w(CRC16RESRW1); /* CRC16 Result Reverse */ +sfr_b(CRC16RESRW1_L); /* CRC16 Result Reverse */ +sfr_b(CRC16RESRW1_H); /* CRC16 Result Reverse */ +#define CRC16RESRB1 CRC16RESRW0_L +#define CRC16RESRB0 CRC16RESRW0_H + +/************************************************************ +* CLOCK SYSTEM +************************************************************/ +#define __MSP430_HAS_CS__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_CS__ 0x0160 +#define CS_BASE __MSP430_BASEADDRESS_CS__ + +sfr_w(CSCTL0); /* CS Control Register 0 */ +sfr_b(CSCTL0_L); /* CS Control Register 0 */ +sfr_b(CSCTL0_H); /* CS Control Register 0 */ +sfr_w(CSCTL1); /* CS Control Register 1 */ +sfr_b(CSCTL1_L); /* CS Control Register 1 */ +sfr_b(CSCTL1_H); /* CS Control Register 1 */ +sfr_w(CSCTL2); /* CS Control Register 2 */ +sfr_b(CSCTL2_L); /* CS Control Register 2 */ +sfr_b(CSCTL2_H); /* CS Control Register 2 */ +sfr_w(CSCTL3); /* CS Control Register 3 */ +sfr_b(CSCTL3_L); /* CS Control Register 3 */ +sfr_b(CSCTL3_H); /* CS Control Register 3 */ +sfr_w(CSCTL4); /* CS Control Register 4 */ +sfr_b(CSCTL4_L); /* CS Control Register 4 */ +sfr_b(CSCTL4_H); /* CS Control Register 4 */ +sfr_w(CSCTL5); /* CS Control Register 5 */ +sfr_b(CSCTL5_L); /* CS Control Register 5 */ +sfr_b(CSCTL5_H); /* CS Control Register 5 */ +sfr_w(CSCTL6); /* CS Control Register 6 */ +sfr_b(CSCTL6_L); /* CS Control Register 6 */ +sfr_b(CSCTL6_H); /* CS Control Register 6 */ + +/* CSCTL0 Control Bits */ + +#define CSKEY (0xA500) /* CS Password */ +#define CSKEY_H (0xA5) /* CS Password for high byte access */ + +/* CSCTL1 Control Bits */ +#define DCOFSEL0 (0x0002) /* DCO frequency select Bit: 0 */ +#define DCOFSEL1 (0x0004) /* DCO frequency select Bit: 1 */ +#define DCOFSEL2 (0x0008) /* DCO frequency select Bit: 2 */ +#define DCORSEL (0x0040) /* DCO range select. */ + +/* CSCTL1 Control Bits */ +#define DCOFSEL0_L (0x0002) /* DCO frequency select Bit: 0 */ +#define DCOFSEL1_L (0x0004) /* DCO frequency select Bit: 1 */ +#define DCOFSEL2_L (0x0008) /* DCO frequency select Bit: 2 */ +#define DCORSEL_L (0x0040) /* DCO range select. */ + +#define DCOFSEL_0 (0x0000) /* DCO frequency select: 0 */ +#define DCOFSEL_1 (0x0002) /* DCO frequency select: 1 */ +#define DCOFSEL_2 (0x0004) /* DCO frequency select: 2 */ +#define DCOFSEL_3 (0x0006) /* DCO frequency select: 3 */ +#define DCOFSEL_4 (0x0008) /* DCO frequency select: 4 */ +#define DCOFSEL_5 (0x000A) /* DCO frequency select: 5 */ +#define DCOFSEL_6 (0x000C) /* DCO frequency select: 6 */ +#define DCOFSEL_7 (0x000E) /* DCO frequency select: 7 */ + +/* CSCTL2 Control Bits */ +#define SELM0 (0x0001) /* MCLK Source Select Bit: 0 */ +#define SELM1 (0x0002) /* MCLK Source Select Bit: 1 */ +#define SELM2 (0x0004) /* MCLK Source Select Bit: 2 */ +//#define RESERVED (0x0004) /* RESERVED */ +//#define RESERVED (0x0008) /* RESERVED */ +#define SELS0 (0x0010) /* SMCLK Source Select Bit: 0 */ +#define SELS1 (0x0020) /* SMCLK Source Select Bit: 1 */ +#define SELS2 (0x0040) /* SMCLK Source Select Bit: 2 */ +//#define RESERVED (0x0040) /* RESERVED */ +//#define RESERVED (0x0080) /* RESERVED */ +#define SELA0 (0x0100) /* ACLK Source Select Bit: 0 */ +#define SELA1 (0x0200) /* ACLK Source Select Bit: 1 */ +#define SELA2 (0x0400) /* ACLK Source Select Bit: 2 */ +//#define RESERVED (0x0400) /* RESERVED */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x1000) /* RESERVED */ +//#define RESERVED (0x2000) /* RESERVED */ +//#define RESERVED (0x4000) /* RESERVED */ +//#define RESERVED (0x8000) /* RESERVED */ + +/* CSCTL2 Control Bits */ +#define SELM0_L (0x0001) /* MCLK Source Select Bit: 0 */ +#define SELM1_L (0x0002) /* MCLK Source Select Bit: 1 */ +#define SELM2_L (0x0004) /* MCLK Source Select Bit: 2 */ +//#define RESERVED (0x0004) /* RESERVED */ +//#define RESERVED (0x0008) /* RESERVED */ +#define SELS0_L (0x0010) /* SMCLK Source Select Bit: 0 */ +#define SELS1_L (0x0020) /* SMCLK Source Select Bit: 1 */ +#define SELS2_L (0x0040) /* SMCLK Source Select Bit: 2 */ +//#define RESERVED (0x0040) /* RESERVED */ +//#define RESERVED (0x0080) /* RESERVED */ +//#define RESERVED (0x0400) /* RESERVED */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x1000) /* RESERVED */ +//#define RESERVED (0x2000) /* RESERVED */ +//#define RESERVED (0x4000) /* RESERVED */ +//#define RESERVED (0x8000) /* RESERVED */ + +/* CSCTL2 Control Bits */ +//#define RESERVED (0x0004) /* RESERVED */ +//#define RESERVED (0x0008) /* RESERVED */ +//#define RESERVED (0x0040) /* RESERVED */ +//#define RESERVED (0x0080) /* RESERVED */ +#define SELA0_H (0x0001) /* ACLK Source Select Bit: 0 */ +#define SELA1_H (0x0002) /* ACLK Source Select Bit: 1 */ +#define SELA2_H (0x0004) /* ACLK Source Select Bit: 2 */ +//#define RESERVED (0x0400) /* RESERVED */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x1000) /* RESERVED */ +//#define RESERVED (0x2000) /* RESERVED */ +//#define RESERVED (0x4000) /* RESERVED */ +//#define RESERVED (0x8000) /* RESERVED */ + +#define SELM_0 (0x0000) /* MCLK Source Select 0 */ +#define SELM_1 (0x0001) /* MCLK Source Select 1 */ +#define SELM_2 (0x0002) /* MCLK Source Select 2 */ +#define SELM_3 (0x0003) /* MCLK Source Select 3 */ +#define SELM_4 (0x0004) /* MCLK Source Select 4 */ +#define SELM_5 (0x0005) /* MCLK Source Select 5 */ +#define SELM_6 (0x0006) /* MCLK Source Select 6 */ +#define SELM_7 (0x0007) /* MCLK Source Select 7 */ +#define SELM__LFXTCLK (0x0000) /* MCLK Source Select LFXTCLK */ +#define SELM__VLOCLK (0x0001) /* MCLK Source Select VLOCLK */ +#define SELM__LFMODCLK (0x0002) /* MCLK Source Select LFMODOSC */ +#define SELM__LFMODOSC (0x0002) /* MCLK Source Select LFMODOSC (legacy) */ +#define SELM__DCOCLK (0x0003) /* MCLK Source Select DCOCLK */ +#define SELM__MODCLK (0x0004) /* MCLK Source Select MODOSC */ +#define SELM__MODOSC (0x0004) /* MCLK Source Select MODOSC (legacy) */ +#define SELM__HFXTCLK (0x0005) /* MCLK Source Select HFXTCLK */ + +#define SELS_0 (0x0000) /* SMCLK Source Select 0 */ +#define SELS_1 (0x0010) /* SMCLK Source Select 1 */ +#define SELS_2 (0x0020) /* SMCLK Source Select 2 */ +#define SELS_3 (0x0030) /* SMCLK Source Select 3 */ +#define SELS_4 (0x0040) /* SMCLK Source Select 4 */ +#define SELS_5 (0x0050) /* SMCLK Source Select 5 */ +#define SELS_6 (0x0060) /* SMCLK Source Select 6 */ +#define SELS_7 (0x0070) /* SMCLK Source Select 7 */ +#define SELS__LFXTCLK (0x0000) /* SMCLK Source Select LFXTCLK */ +#define SELS__VLOCLK (0x0010) /* SMCLK Source Select VLOCLK */ +#define SELS__LFMODCLK (0x0020) /* SMCLK Source Select LFMODOSC */ +#define SELS__LFMODOSC (0x0020) /* SMCLK Source Select LFMODOSC (legacy) */ +#define SELS__DCOCLK (0x0030) /* SMCLK Source Select DCOCLK */ +#define SELS__MODCLK (0x0040) /* SMCLK Source Select MODOSC */ +#define SELS__MODOSC (0x0040) /* SMCLK Source Select MODOSC (legacy) */ +#define SELS__HFXTCLK (0x0050) /* SMCLK Source Select HFXTCLK */ + +#define SELA_0 (0x0000) /* ACLK Source Select 0 */ +#define SELA_1 (0x0100) /* ACLK Source Select 1 */ +#define SELA_2 (0x0200) /* ACLK Source Select 2 */ +#define SELA_3 (0x0300) /* ACLK Source Select 3 */ +#define SELA_4 (0x0400) /* ACLK Source Select 4 */ +#define SELA_5 (0x0500) /* ACLK Source Select 5 */ +#define SELA_6 (0x0600) /* ACLK Source Select 6 */ +#define SELA_7 (0x0700) /* ACLK Source Select 7 */ +#define SELA__LFXTCLK (0x0000) /* ACLK Source Select LFXTCLK */ +#define SELA__VLOCLK (0x0100) /* ACLK Source Select VLOCLK */ +#define SELA__LFMODCLK (0x0200) /* ACLK Source Select LFMODOSC */ +#define SELA__LFMODOSC (0x0200) /* ACLK Source Select LFMODOSC (legacy) */ + +/* CSCTL3 Control Bits */ +#define DIVM0 (0x0001) /* MCLK Divider Bit: 0 */ +#define DIVM1 (0x0002) /* MCLK Divider Bit: 1 */ +#define DIVM2 (0x0004) /* MCLK Divider Bit: 2 */ +//#define RESERVED (0x0004) /* RESERVED */ +//#define RESERVED (0x0008) /* RESERVED */ +#define DIVS0 (0x0010) /* SMCLK Divider Bit: 0 */ +#define DIVS1 (0x0020) /* SMCLK Divider Bit: 1 */ +#define DIVS2 (0x0040) /* SMCLK Divider Bit: 2 */ +//#define RESERVED (0x0040) /* RESERVED */ +//#define RESERVED (0x0080) /* RESERVED */ +#define DIVA0 (0x0100) /* ACLK Divider Bit: 0 */ +#define DIVA1 (0x0200) /* ACLK Divider Bit: 1 */ +#define DIVA2 (0x0400) /* ACLK Divider Bit: 2 */ +//#define RESERVED (0x0400) /* RESERVED */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x1000) /* RESERVED */ +//#define RESERVED (0x2000) /* RESERVED */ +//#define RESERVED (0x4000) /* RESERVED */ +//#define RESERVED (0x8000) /* RESERVED */ + +/* CSCTL3 Control Bits */ +#define DIVM0_L (0x0001) /* MCLK Divider Bit: 0 */ +#define DIVM1_L (0x0002) /* MCLK Divider Bit: 1 */ +#define DIVM2_L (0x0004) /* MCLK Divider Bit: 2 */ +//#define RESERVED (0x0004) /* RESERVED */ +//#define RESERVED (0x0008) /* RESERVED */ +#define DIVS0_L (0x0010) /* SMCLK Divider Bit: 0 */ +#define DIVS1_L (0x0020) /* SMCLK Divider Bit: 1 */ +#define DIVS2_L (0x0040) /* SMCLK Divider Bit: 2 */ +//#define RESERVED (0x0040) /* RESERVED */ +//#define RESERVED (0x0080) /* RESERVED */ +//#define RESERVED (0x0400) /* RESERVED */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x1000) /* RESERVED */ +//#define RESERVED (0x2000) /* RESERVED */ +//#define RESERVED (0x4000) /* RESERVED */ +//#define RESERVED (0x8000) /* RESERVED */ + +/* CSCTL3 Control Bits */ +//#define RESERVED (0x0004) /* RESERVED */ +//#define RESERVED (0x0008) /* RESERVED */ +//#define RESERVED (0x0040) /* RESERVED */ +//#define RESERVED (0x0080) /* RESERVED */ +#define DIVA0_H (0x0001) /* ACLK Divider Bit: 0 */ +#define DIVA1_H (0x0002) /* ACLK Divider Bit: 1 */ +#define DIVA2_H (0x0004) /* ACLK Divider Bit: 2 */ +//#define RESERVED (0x0400) /* RESERVED */ +//#define RESERVED (0x0800) /* RESERVED */ +//#define RESERVED (0x1000) /* RESERVED */ +//#define RESERVED (0x2000) /* RESERVED */ +//#define RESERVED (0x4000) /* RESERVED */ +//#define RESERVED (0x8000) /* RESERVED */ + +#define DIVM_0 (0x0000) /* MCLK Source Divider 0 */ +#define DIVM_1 (0x0001) /* MCLK Source Divider 1 */ +#define DIVM_2 (0x0002) /* MCLK Source Divider 2 */ +#define DIVM_3 (0x0003) /* MCLK Source Divider 3 */ +#define DIVM_4 (0x0004) /* MCLK Source Divider 4 */ +#define DIVM_5 (0x0005) /* MCLK Source Divider 5 */ +#define DIVM__1 (0x0000) /* MCLK Source Divider f(MCLK)/1 */ +#define DIVM__2 (0x0001) /* MCLK Source Divider f(MCLK)/2 */ +#define DIVM__4 (0x0002) /* MCLK Source Divider f(MCLK)/4 */ +#define DIVM__8 (0x0003) /* MCLK Source Divider f(MCLK)/8 */ +#define DIVM__16 (0x0004) /* MCLK Source Divider f(MCLK)/16 */ +#define DIVM__32 (0x0005) /* MCLK Source Divider f(MCLK)/32 */ + +#define DIVS_0 (0x0000) /* SMCLK Source Divider 0 */ +#define DIVS_1 (0x0010) /* SMCLK Source Divider 1 */ +#define DIVS_2 (0x0020) /* SMCLK Source Divider 2 */ +#define DIVS_3 (0x0030) /* SMCLK Source Divider 3 */ +#define DIVS_4 (0x0040) /* SMCLK Source Divider 4 */ +#define DIVS_5 (0x0050) /* SMCLK Source Divider 5 */ +#define DIVS__1 (0x0000) /* SMCLK Source Divider f(SMCLK)/1 */ +#define DIVS__2 (0x0010) /* SMCLK Source Divider f(SMCLK)/2 */ +#define DIVS__4 (0x0020) /* SMCLK Source Divider f(SMCLK)/4 */ +#define DIVS__8 (0x0030) /* SMCLK Source Divider f(SMCLK)/8 */ +#define DIVS__16 (0x0040) /* SMCLK Source Divider f(SMCLK)/16 */ +#define DIVS__32 (0x0050) /* SMCLK Source Divider f(SMCLK)/32 */ + +#define DIVA_0 (0x0000) /* ACLK Source Divider 0 */ +#define DIVA_1 (0x0100) /* ACLK Source Divider 1 */ +#define DIVA_2 (0x0200) /* ACLK Source Divider 2 */ +#define DIVA_3 (0x0300) /* ACLK Source Divider 3 */ +#define DIVA_4 (0x0400) /* ACLK Source Divider 4 */ +#define DIVA_5 (0x0500) /* ACLK Source Divider 5 */ +#define DIVA__1 (0x0000) /* ACLK Source Divider f(ACLK)/1 */ +#define DIVA__2 (0x0100) /* ACLK Source Divider f(ACLK)/2 */ +#define DIVA__4 (0x0200) /* ACLK Source Divider f(ACLK)/4 */ +#define DIVA__8 (0x0300) /* ACLK Source Divider f(ACLK)/8 */ +#define DIVA__16 (0x0400) /* ACLK Source Divider f(ACLK)/16 */ +#define DIVA__32 (0x0500) /* ACLK Source Divider f(ACLK)/32 */ + +/* CSCTL4 Control Bits */ +#define LFXTOFF (0x0001) /* Low Frequency Oscillator (LFXT) disable */ +#define SMCLKOFF (0x0002) /* SMCLK Off */ +#define VLOOFF (0x0008) /* VLO Off */ +#define LFXTBYPASS (0x0010) /* LFXT bypass mode : 0: internal 1:sourced from external pin */ +#define LFXTDRIVE0 (0x0040) /* LFXT Drive Level mode Bit 0 */ +#define LFXTDRIVE1 (0x0080) /* LFXT Drive Level mode Bit 1 */ +#define HFXTOFF (0x0100) /* High Frequency Oscillator disable */ +#define HFFREQ0 (0x0400) /* HFXT frequency selection Bit 1 */ +#define HFFREQ1 (0x0800) /* HFXT frequency selection Bit 0 */ +#define HFXTBYPASS (0x1000) /* HFXT bypass mode : 0: internal 1:sourced from external pin */ +#define HFXTDRIVE0 (0x4000) /* HFXT Drive Level mode Bit 0 */ +#define HFXTDRIVE1 (0x8000) /* HFXT Drive Level mode Bit 1 */ + +/* CSCTL4 Control Bits */ +#define LFXTOFF_L (0x0001) /* Low Frequency Oscillator (LFXT) disable */ +#define SMCLKOFF_L (0x0002) /* SMCLK Off */ +#define VLOOFF_L (0x0008) /* VLO Off */ +#define LFXTBYPASS_L (0x0010) /* LFXT bypass mode : 0: internal 1:sourced from external pin */ +#define LFXTDRIVE0_L (0x0040) /* LFXT Drive Level mode Bit 0 */ +#define LFXTDRIVE1_L (0x0080) /* LFXT Drive Level mode Bit 1 */ + +/* CSCTL4 Control Bits */ +#define HFXTOFF_H (0x0001) /* High Frequency Oscillator disable */ +#define HFFREQ0_H (0x0004) /* HFXT frequency selection Bit 1 */ +#define HFFREQ1_H (0x0008) /* HFXT frequency selection Bit 0 */ +#define HFXTBYPASS_H (0x0010) /* HFXT bypass mode : 0: internal 1:sourced from external pin */ +#define HFXTDRIVE0_H (0x0040) /* HFXT Drive Level mode Bit 0 */ +#define HFXTDRIVE1_H (0x0080) /* HFXT Drive Level mode Bit 1 */ + +#define LFXTDRIVE_0 (0x0000) /* LFXT Drive Level mode: 0 */ +#define LFXTDRIVE_1 (0x0040) /* LFXT Drive Level mode: 1 */ +#define LFXTDRIVE_2 (0x0080) /* LFXT Drive Level mode: 2 */ +#define LFXTDRIVE_3 (0x00C0) /* LFXT Drive Level mode: 3 */ + +#define HFFREQ_0 (0x0000) /* HFXT frequency selection: 0 */ +#define HFFREQ_1 (0x0400) /* HFXT frequency selection: 1 */ +#define HFFREQ_2 (0x0800) /* HFXT frequency selection: 2 */ +#define HFFREQ_3 (0x0C00) /* HFXT frequency selection: 3 */ + +#define HFXTDRIVE_0 (0x0000) /* HFXT Drive Level mode: 0 */ +#define HFXTDRIVE_1 (0x4000) /* HFXT Drive Level mode: 1 */ +#define HFXTDRIVE_2 (0x8000) /* HFXT Drive Level mode: 2 */ +#define HFXTDRIVE_3 (0xC000) /* HFXT Drive Level mode: 3 */ + +/* CSCTL5 Control Bits */ +#define LFXTOFFG (0x0001) /* LFXT Low Frequency Oscillator Fault Flag */ +#define HFXTOFFG (0x0002) /* HFXT High Frequency Oscillator Fault Flag */ +#define ENSTFCNT1 (0x0040) /* Enable start counter for XT1 */ +#define ENSTFCNT2 (0x0080) /* Enable start counter for XT2 */ + +/* CSCTL5 Control Bits */ +#define LFXTOFFG_L (0x0001) /* LFXT Low Frequency Oscillator Fault Flag */ +#define HFXTOFFG_L (0x0002) /* HFXT High Frequency Oscillator Fault Flag */ +#define ENSTFCNT1_L (0x0040) /* Enable start counter for XT1 */ +#define ENSTFCNT2_L (0x0080) /* Enable start counter for XT2 */ + +/* CSCTL6 Control Bits */ +#define ACLKREQEN (0x0001) /* ACLK Clock Request Enable */ +#define MCLKREQEN (0x0002) /* MCLK Clock Request Enable */ +#define SMCLKREQEN (0x0004) /* SMCLK Clock Request Enable */ +#define MODCLKREQEN (0x0008) /* MODOSC Clock Request Enable */ + +/* CSCTL6 Control Bits */ +#define ACLKREQEN_L (0x0001) /* ACLK Clock Request Enable */ +#define MCLKREQEN_L (0x0002) /* MCLK Clock Request Enable */ +#define SMCLKREQEN_L (0x0004) /* SMCLK Clock Request Enable */ +#define MODCLKREQEN_L (0x0008) /* MODOSC Clock Request Enable */ + +/************************************************************ +* DMA_X +************************************************************/ +#define __MSP430_HAS_DMAX_3__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_DMAX_3__ 0x0500 +#define DMA_BASE __MSP430_BASEADDRESS_DMAX_3__ + +sfr_w(DMACTL0); /* DMA Module Control 0 */ +sfr_b(DMACTL0_L); /* DMA Module Control 0 */ +sfr_b(DMACTL0_H); /* DMA Module Control 0 */ +sfr_w(DMACTL1); /* DMA Module Control 1 */ +sfr_b(DMACTL1_L); /* DMA Module Control 1 */ +sfr_b(DMACTL1_H); /* DMA Module Control 1 */ +sfr_w(DMACTL2); /* DMA Module Control 2 */ +sfr_b(DMACTL2_L); /* DMA Module Control 2 */ +sfr_b(DMACTL2_H); /* DMA Module Control 2 */ +sfr_w(DMACTL3); /* DMA Module Control 3 */ +sfr_b(DMACTL3_L); /* DMA Module Control 3 */ +sfr_b(DMACTL3_H); /* DMA Module Control 3 */ +sfr_w(DMACTL4); /* DMA Module Control 4 */ +sfr_b(DMACTL4_L); /* DMA Module Control 4 */ +sfr_b(DMACTL4_H); /* DMA Module Control 4 */ +sfr_w(DMAIV); /* DMA Interrupt Vector Word */ +sfr_b(DMAIV_L); /* DMA Interrupt Vector Word */ +sfr_b(DMAIV_H); /* DMA Interrupt Vector Word */ + +sfr_w(DMA0CTL); /* DMA Channel 0 Control */ +sfr_b(DMA0CTL_L); /* DMA Channel 0 Control */ +sfr_b(DMA0CTL_H); /* DMA Channel 0 Control */ +sfr_l(DMA0SA); /* DMA Channel 0 Source Address */ +sfr_w(DMA0SAL); /* DMA Channel 0 Source Address */ +sfr_w(DMA0SAH); /* DMA Channel 0 Source Address */ +sfr_l(DMA0DA); /* DMA Channel 0 Destination Address */ +sfr_w(DMA0DAL); /* DMA Channel 0 Destination Address */ +sfr_w(DMA0DAH); /* DMA Channel 0 Destination Address */ +sfr_w(DMA0SZ); /* DMA Channel 0 Transfer Size */ + +sfr_w(DMA1CTL); /* DMA Channel 1 Control */ +sfr_b(DMA1CTL_L); /* DMA Channel 1 Control */ +sfr_b(DMA1CTL_H); /* DMA Channel 1 Control */ +sfr_l(DMA1SA); /* DMA Channel 1 Source Address */ +sfr_w(DMA1SAL); /* DMA Channel 1 Source Address */ +sfr_w(DMA1SAH); /* DMA Channel 1 Source Address */ +sfr_l(DMA1DA); /* DMA Channel 1 Destination Address */ +sfr_w(DMA1DAL); /* DMA Channel 1 Destination Address */ +sfr_w(DMA1DAH); /* DMA Channel 1 Destination Address */ +sfr_w(DMA1SZ); /* DMA Channel 1 Transfer Size */ + +sfr_w(DMA2CTL); /* DMA Channel 2 Control */ +sfr_b(DMA2CTL_L); /* DMA Channel 2 Control */ +sfr_b(DMA2CTL_H); /* DMA Channel 2 Control */ +sfr_l(DMA2SA); /* DMA Channel 2 Source Address */ +sfr_w(DMA2SAL); /* DMA Channel 2 Source Address */ +sfr_w(DMA2SAH); /* DMA Channel 2 Source Address */ +sfr_l(DMA2DA); /* DMA Channel 2 Destination Address */ +sfr_w(DMA2DAL); /* DMA Channel 2 Destination Address */ +sfr_w(DMA2DAH); /* DMA Channel 2 Destination Address */ +sfr_w(DMA2SZ); /* DMA Channel 2 Transfer Size */ + +/* DMACTL0 Control Bits */ +#define DMA0TSEL0 (0x0001) /* DMA channel 0 transfer select bit 0 */ +#define DMA0TSEL1 (0x0002) /* DMA channel 0 transfer select bit 1 */ +#define DMA0TSEL2 (0x0004) /* DMA channel 0 transfer select bit 2 */ +#define DMA0TSEL3 (0x0008) /* DMA channel 0 transfer select bit 3 */ +#define DMA0TSEL4 (0x0010) /* DMA channel 0 transfer select bit 4 */ +#define DMA1TSEL0 (0x0100) /* DMA channel 1 transfer select bit 0 */ +#define DMA1TSEL1 (0x0200) /* DMA channel 1 transfer select bit 1 */ +#define DMA1TSEL2 (0x0400) /* DMA channel 1 transfer select bit 2 */ +#define DMA1TSEL3 (0x0800) /* DMA channel 1 transfer select bit 3 */ +#define DMA1TSEL4 (0x1000) /* DMA channel 1 transfer select bit 4 */ + +/* DMACTL0 Control Bits */ +#define DMA0TSEL0_L (0x0001) /* DMA channel 0 transfer select bit 0 */ +#define DMA0TSEL1_L (0x0002) /* DMA channel 0 transfer select bit 1 */ +#define DMA0TSEL2_L (0x0004) /* DMA channel 0 transfer select bit 2 */ +#define DMA0TSEL3_L (0x0008) /* DMA channel 0 transfer select bit 3 */ +#define DMA0TSEL4_L (0x0010) /* DMA channel 0 transfer select bit 4 */ + +/* DMACTL0 Control Bits */ +#define DMA1TSEL0_H (0x0001) /* DMA channel 1 transfer select bit 0 */ +#define DMA1TSEL1_H (0x0002) /* DMA channel 1 transfer select bit 1 */ +#define DMA1TSEL2_H (0x0004) /* DMA channel 1 transfer select bit 2 */ +#define DMA1TSEL3_H (0x0008) /* DMA channel 1 transfer select bit 3 */ +#define DMA1TSEL4_H (0x0010) /* DMA channel 1 transfer select bit 4 */ + +/* DMACTL01 Control Bits */ +#define DMA2TSEL0 (0x0001) /* DMA channel 2 transfer select bit 0 */ +#define DMA2TSEL1 (0x0002) /* DMA channel 2 transfer select bit 1 */ +#define DMA2TSEL2 (0x0004) /* DMA channel 2 transfer select bit 2 */ +#define DMA2TSEL3 (0x0008) /* DMA channel 2 transfer select bit 3 */ +#define DMA2TSEL4 (0x0010) /* DMA channel 2 transfer select bit 4 */ + +/* DMACTL01 Control Bits */ +#define DMA2TSEL0_L (0x0001) /* DMA channel 2 transfer select bit 0 */ +#define DMA2TSEL1_L (0x0002) /* DMA channel 2 transfer select bit 1 */ +#define DMA2TSEL2_L (0x0004) /* DMA channel 2 transfer select bit 2 */ +#define DMA2TSEL3_L (0x0008) /* DMA channel 2 transfer select bit 3 */ +#define DMA2TSEL4_L (0x0010) /* DMA channel 2 transfer select bit 4 */ + +/* DMACTL4 Control Bits */ +#define ENNMI (0x0001) /* Enable NMI interruption of DMA */ +#define ROUNDROBIN (0x0002) /* Round-Robin DMA channel priorities */ +#define DMARMWDIS (0x0004) /* Inhibited DMA transfers during read-modify-write CPU operations */ + +/* DMACTL4 Control Bits */ +#define ENNMI_L (0x0001) /* Enable NMI interruption of DMA */ +#define ROUNDROBIN_L (0x0002) /* Round-Robin DMA channel priorities */ +#define DMARMWDIS_L (0x0004) /* Inhibited DMA transfers during read-modify-write CPU operations */ + +/* DMAxCTL Control Bits */ +#define DMAREQ (0x0001) /* Initiate DMA transfer with DMATSEL */ +#define DMAABORT (0x0002) /* DMA transfer aborted by NMI */ +#define DMAIE (0x0004) /* DMA interrupt enable */ +#define DMAIFG (0x0008) /* DMA interrupt flag */ +#define DMAEN (0x0010) /* DMA enable */ +#define DMALEVEL (0x0020) /* DMA level sensitive trigger select */ +#define DMASRCBYTE (0x0040) /* DMA source byte */ +#define DMADSTBYTE (0x0080) /* DMA destination byte */ +#define DMASRCINCR0 (0x0100) /* DMA source increment bit 0 */ +#define DMASRCINCR1 (0x0200) /* DMA source increment bit 1 */ +#define DMADSTINCR0 (0x0400) /* DMA destination increment bit 0 */ +#define DMADSTINCR1 (0x0800) /* DMA destination increment bit 1 */ +#define DMADT0 (0x1000) /* DMA transfer mode bit 0 */ +#define DMADT1 (0x2000) /* DMA transfer mode bit 1 */ +#define DMADT2 (0x4000) /* DMA transfer mode bit 2 */ + +/* DMAxCTL Control Bits */ +#define DMAREQ_L (0x0001) /* Initiate DMA transfer with DMATSEL */ +#define DMAABORT_L (0x0002) /* DMA transfer aborted by NMI */ +#define DMAIE_L (0x0004) /* DMA interrupt enable */ +#define DMAIFG_L (0x0008) /* DMA interrupt flag */ +#define DMAEN_L (0x0010) /* DMA enable */ +#define DMALEVEL_L (0x0020) /* DMA level sensitive trigger select */ +#define DMASRCBYTE_L (0x0040) /* DMA source byte */ +#define DMADSTBYTE_L (0x0080) /* DMA destination byte */ + +/* DMAxCTL Control Bits */ +#define DMASRCINCR0_H (0x0001) /* DMA source increment bit 0 */ +#define DMASRCINCR1_H (0x0002) /* DMA source increment bit 1 */ +#define DMADSTINCR0_H (0x0004) /* DMA destination increment bit 0 */ +#define DMADSTINCR1_H (0x0008) /* DMA destination increment bit 1 */ +#define DMADT0_H (0x0010) /* DMA transfer mode bit 0 */ +#define DMADT1_H (0x0020) /* DMA transfer mode bit 1 */ +#define DMADT2_H (0x0040) /* DMA transfer mode bit 2 */ + +#define DMASWDW (0x0000) /* DMA transfer: source word to destination word */ +#define DMASBDW (0x0040) /* DMA transfer: source byte to destination word */ +#define DMASWDB (0x0080) /* DMA transfer: source word to destination byte */ +#define DMASBDB (0x00C0) /* DMA transfer: source byte to destination byte */ + +#define DMASRCINCR_0 (0x0000) /* DMA source increment 0: source address unchanged */ +#define DMASRCINCR_1 (0x0100) /* DMA source increment 1: source address unchanged */ +#define DMASRCINCR_2 (0x0200) /* DMA source increment 2: source address decremented */ +#define DMASRCINCR_3 (0x0300) /* DMA source increment 3: source address incremented */ + +#define DMADSTINCR_0 (0x0000) /* DMA destination increment 0: destination address unchanged */ +#define DMADSTINCR_1 (0x0400) /* DMA destination increment 1: destination address unchanged */ +#define DMADSTINCR_2 (0x0800) /* DMA destination increment 2: destination address decremented */ +#define DMADSTINCR_3 (0x0C00) /* DMA destination increment 3: destination address incremented */ + +#define DMADT_0 (0x0000) /* DMA transfer mode 0: Single transfer */ +#define DMADT_1 (0x1000) /* DMA transfer mode 1: Block transfer */ +#define DMADT_2 (0x2000) /* DMA transfer mode 2: Burst-Block transfer */ +#define DMADT_3 (0x3000) /* DMA transfer mode 3: Burst-Block transfer */ +#define DMADT_4 (0x4000) /* DMA transfer mode 4: Repeated Single transfer */ +#define DMADT_5 (0x5000) /* DMA transfer mode 5: Repeated Block transfer */ +#define DMADT_6 (0x6000) /* DMA transfer mode 6: Repeated Burst-Block transfer */ +#define DMADT_7 (0x7000) /* DMA transfer mode 7: Repeated Burst-Block transfer */ + +/* DMAIV Definitions */ +#define DMAIV_NONE (0x0000) /* No Interrupt pending */ +#define DMAIV_DMA0IFG (0x0002) /* DMA0IFG*/ +#define DMAIV_DMA1IFG (0x0004) /* DMA1IFG*/ +#define DMAIV_DMA2IFG (0x0006) /* DMA2IFG*/ + +#define DMA0TSEL_0 (0x0000) /* DMA channel 0 transfer select 0: DMA_REQ (sw) */ +#define DMA0TSEL_1 (0x0001) /* DMA channel 0 transfer select 1: */ +#define DMA0TSEL_2 (0x0002) /* DMA channel 0 transfer select 2: */ +#define DMA0TSEL_3 (0x0003) /* DMA channel 0 transfer select 3: */ +#define DMA0TSEL_4 (0x0004) /* DMA channel 0 transfer select 4: */ +#define DMA0TSEL_5 (0x0005) /* DMA channel 0 transfer select 5: */ +#define DMA0TSEL_6 (0x0006) /* DMA channel 0 transfer select 6: */ +#define DMA0TSEL_7 (0x0007) /* DMA channel 0 transfer select 7: */ +#define DMA0TSEL_8 (0x0008) /* DMA channel 0 transfer select 8: */ +#define DMA0TSEL_9 (0x0009) /* DMA channel 0 transfer select 9: */ +#define DMA0TSEL_10 (0x000A) /* DMA channel 0 transfer select 10: */ +#define DMA0TSEL_11 (0x000B) /* DMA channel 0 transfer select 11: */ +#define DMA0TSEL_12 (0x000C) /* DMA channel 0 transfer select 12: */ +#define DMA0TSEL_13 (0x000D) /* DMA channel 0 transfer select 13: */ +#define DMA0TSEL_14 (0x000E) /* DMA channel 0 transfer select 14: */ +#define DMA0TSEL_15 (0x000F) /* DMA channel 0 transfer select 15: */ +#define DMA0TSEL_16 (0x0010) /* DMA channel 0 transfer select 16: */ +#define DMA0TSEL_17 (0x0011) /* DMA channel 0 transfer select 17: */ +#define DMA0TSEL_18 (0x0012) /* DMA channel 0 transfer select 18: */ +#define DMA0TSEL_19 (0x0013) /* DMA channel 0 transfer select 19: */ +#define DMA0TSEL_20 (0x0014) /* DMA channel 0 transfer select 20: */ +#define DMA0TSEL_21 (0x0015) /* DMA channel 0 transfer select 21: */ +#define DMA0TSEL_22 (0x0016) /* DMA channel 0 transfer select 22: */ +#define DMA0TSEL_23 (0x0017) /* DMA channel 0 transfer select 23: */ +#define DMA0TSEL_24 (0x0018) /* DMA channel 0 transfer select 24: */ +#define DMA0TSEL_25 (0x0019) /* DMA channel 0 transfer select 25: */ +#define DMA0TSEL_26 (0x001A) /* DMA channel 0 transfer select 26: */ +#define DMA0TSEL_27 (0x001B) /* DMA channel 0 transfer select 27: */ +#define DMA0TSEL_28 (0x001C) /* DMA channel 0 transfer select 28: */ +#define DMA0TSEL_29 (0x001D) /* DMA channel 0 transfer select 29: */ +#define DMA0TSEL_30 (0x001E) /* DMA channel 0 transfer select 30: previous DMA channel DMA2IFG */ +#define DMA0TSEL_31 (0x001F) /* DMA channel 0 transfer select 31: ext. Trigger (DMAE0) */ + +#define DMA1TSEL_0 (0x0000) /* DMA channel 1 transfer select 0: DMA_REQ (sw) */ +#define DMA1TSEL_1 (0x0100) /* DMA channel 1 transfer select 1: */ +#define DMA1TSEL_2 (0x0200) /* DMA channel 1 transfer select 2: */ +#define DMA1TSEL_3 (0x0300) /* DMA channel 1 transfer select 3: */ +#define DMA1TSEL_4 (0x0400) /* DMA channel 1 transfer select 4: */ +#define DMA1TSEL_5 (0x0500) /* DMA channel 1 transfer select 5: */ +#define DMA1TSEL_6 (0x0600) /* DMA channel 1 transfer select 6: */ +#define DMA1TSEL_7 (0x0700) /* DMA channel 1 transfer select 7: */ +#define DMA1TSEL_8 (0x0800) /* DMA channel 1 transfer select 8: */ +#define DMA1TSEL_9 (0x0900) /* DMA channel 1 transfer select 9: */ +#define DMA1TSEL_10 (0x0A00) /* DMA channel 1 transfer select 10: */ +#define DMA1TSEL_11 (0x0B00) /* DMA channel 1 transfer select 11: */ +#define DMA1TSEL_12 (0x0C00) /* DMA channel 1 transfer select 12: */ +#define DMA1TSEL_13 (0x0D00) /* DMA channel 1 transfer select 13: */ +#define DMA1TSEL_14 (0x0E00) /* DMA channel 1 transfer select 14: */ +#define DMA1TSEL_15 (0x0F00) /* DMA channel 1 transfer select 15: */ +#define DMA1TSEL_16 (0x1000) /* DMA channel 1 transfer select 16: */ +#define DMA1TSEL_17 (0x1100) /* DMA channel 1 transfer select 17: */ +#define DMA1TSEL_18 (0x1200) /* DMA channel 1 transfer select 18: */ +#define DMA1TSEL_19 (0x1300) /* DMA channel 1 transfer select 19: */ +#define DMA1TSEL_20 (0x1400) /* DMA channel 1 transfer select 20: */ +#define DMA1TSEL_21 (0x1500) /* DMA channel 1 transfer select 21: */ +#define DMA1TSEL_22 (0x1600) /* DMA channel 1 transfer select 22: */ +#define DMA1TSEL_23 (0x1700) /* DMA channel 1 transfer select 23: */ +#define DMA1TSEL_24 (0x1800) /* DMA channel 1 transfer select 24: */ +#define DMA1TSEL_25 (0x1900) /* DMA channel 1 transfer select 25: */ +#define DMA1TSEL_26 (0x1A00) /* DMA channel 1 transfer select 26: */ +#define DMA1TSEL_27 (0x1B00) /* DMA channel 1 transfer select 27: */ +#define DMA1TSEL_28 (0x1C00) /* DMA channel 1 transfer select 28: */ +#define DMA1TSEL_29 (0x1D00) /* DMA channel 1 transfer select 29: */ +#define DMA1TSEL_30 (0x1E00) /* DMA channel 1 transfer select 30: previous DMA channel DMA0IFG */ +#define DMA1TSEL_31 (0x1F00) /* DMA channel 1 transfer select 31: ext. Trigger (DMAE0) */ + +#define DMA2TSEL_0 (0x0000) /* DMA channel 2 transfer select 0: DMA_REQ (sw) */ +#define DMA2TSEL_1 (0x0001) /* DMA channel 2 transfer select 1: */ +#define DMA2TSEL_2 (0x0002) /* DMA channel 2 transfer select 2: */ +#define DMA2TSEL_3 (0x0003) /* DMA channel 2 transfer select 3: */ +#define DMA2TSEL_4 (0x0004) /* DMA channel 2 transfer select 4: */ +#define DMA2TSEL_5 (0x0005) /* DMA channel 2 transfer select 5: */ +#define DMA2TSEL_6 (0x0006) /* DMA channel 2 transfer select 6: */ +#define DMA2TSEL_7 (0x0007) /* DMA channel 2 transfer select 7: */ +#define DMA2TSEL_8 (0x0008) /* DMA channel 2 transfer select 8: */ +#define DMA2TSEL_9 (0x0009) /* DMA channel 2 transfer select 9: */ +#define DMA2TSEL_10 (0x000A) /* DMA channel 2 transfer select 10: */ +#define DMA2TSEL_11 (0x000B) /* DMA channel 2 transfer select 11: */ +#define DMA2TSEL_12 (0x000C) /* DMA channel 2 transfer select 12: */ +#define DMA2TSEL_13 (0x000D) /* DMA channel 2 transfer select 13: */ +#define DMA2TSEL_14 (0x000E) /* DMA channel 2 transfer select 14: */ +#define DMA2TSEL_15 (0x000F) /* DMA channel 2 transfer select 15: */ +#define DMA2TSEL_16 (0x0010) /* DMA channel 2 transfer select 16: */ +#define DMA2TSEL_17 (0x0011) /* DMA channel 2 transfer select 17: */ +#define DMA2TSEL_18 (0x0012) /* DMA channel 2 transfer select 18: */ +#define DMA2TSEL_19 (0x0013) /* DMA channel 2 transfer select 19: */ +#define DMA2TSEL_20 (0x0014) /* DMA channel 2 transfer select 20: */ +#define DMA2TSEL_21 (0x0015) /* DMA channel 2 transfer select 21: */ +#define DMA2TSEL_22 (0x0016) /* DMA channel 2 transfer select 22: */ +#define DMA2TSEL_23 (0x0017) /* DMA channel 2 transfer select 23: */ +#define DMA2TSEL_24 (0x0018) /* DMA channel 2 transfer select 24: */ +#define DMA2TSEL_25 (0x0019) /* DMA channel 2 transfer select 25: */ +#define DMA2TSEL_26 (0x001A) /* DMA channel 2 transfer select 26: */ +#define DMA2TSEL_27 (0x001B) /* DMA channel 2 transfer select 27: */ +#define DMA2TSEL_28 (0x001C) /* DMA channel 2 transfer select 28: */ +#define DMA2TSEL_29 (0x001D) /* DMA channel 2 transfer select 29: */ +#define DMA2TSEL_30 (0x001E) /* DMA channel 2 transfer select 30: previous DMA channel DMA1IFG */ +#define DMA2TSEL_31 (0x001F) /* DMA channel 2 transfer select 31: ext. Trigger (DMAE0) */ + +#define DMA0TSEL__DMAREQ (0x0000) /* DMA channel 0 transfer select 0: DMA_REQ (sw) */ +#define DMA0TSEL__TA0CCR0 (0x0001) /* DMA channel 0 transfer select 1: TA0CCR0 */ +#define DMA0TSEL__TA0CCR2 (0x0002) /* DMA channel 0 transfer select 2: TA0CCR2 */ +#define DMA0TSEL__TA1CCR0 (0x0003) /* DMA channel 0 transfer select 3: TA1CCR0 */ +#define DMA0TSEL__TA1CCR2 (0x0004) /* DMA channel 0 transfer select 4: TA1CCR2 */ +#define DMA0TSEL__TA2CCR0 (0x0005) /* DMA channel 0 transfer select 3: TA2CCR0 */ +#define DMA0TSEL__TA3CCR0 (0x0006) /* DMA channel 0 transfer select 4: TA3CCR0 */ +#define DMA0TSEL__TB0CCR0 (0x0007) /* DMA channel 0 transfer select 7: TB0CCR0 */ +#define DMA0TSEL__TB0CCR2 (0x0008) /* DMA channel 0 transfer select 8: TB0CCR2 */ +#define DMA0TSEL__RES9 (0x0009) /* DMA channel 0 transfer select 9: RES9 */ +#define DMA0TSEL__RES10 (0x000A) /* DMA channel 0 transfer select 10: RES10 */ +#define DMA0TSEL__AES_Trigger_0 (0x000B) /* DMA channel 0 transfer select 11: AES Trigger 0 */ +#define DMA0TSEL__AES_Trigger_1 (0x000C) /* DMA channel 0 transfer select 12: AES Trigger 1 */ +#define DMA0TSEL__AES_Trigger_2 (0x000D) /* DMA channel 0 transfer select 13: AES Trigger 2 */ +#define DMA0TSEL__UCA0RXIFG (0x000E) /* DMA channel 0 transfer select 14: UCA0RXIFG */ +#define DMA0TSEL__UCA0TXIFG (0x000F) /* DMA channel 0 transfer select 15: UCA0TXIFG */ +#define DMA0TSEL__UCA1RXIFG (0x0010) /* DMA channel 0 transfer select 16: UCA1RXIFG */ +#define DMA0TSEL__UCA1TXIFG (0x0011) /* DMA channel 0 transfer select 17: UCA1TXIFG */ +#define DMA0TSEL__UCB0RXIFG0 (0x0012) /* DMA channel 0 transfer select 18: UCB0RXIFG0 */ +#define DMA0TSEL__UCB0TXIFG0 (0x0013) /* DMA channel 0 transfer select 19: UCB0TXIFG0 */ +#define DMA0TSEL__UCB0RXIFG1 (0x0014) /* DMA channel 0 transfer select 20: UCB0RXIFG1 */ +#define DMA0TSEL__UCB0TXIFG1 (0x0015) /* DMA channel 0 transfer select 21: UCB0TXIFG1 */ +#define DMA0TSEL__UCB0RXIFG2 (0x0016) /* DMA channel 0 transfer select 22: UCB0RXIFG2 */ +#define DMA0TSEL__UCB0TXIFG2 (0x0017) /* DMA channel 0 transfer select 23: UCB0TXIFG2 */ +#define DMA0TSEL__UCB1RXIFG0 (0x0018) /* DMA channel 0 transfer select 24: UCB1RXIFG0 */ +#define DMA0TSEL__UCB1TXIFG0 (0x0019) /* DMA channel 0 transfer select 25: UCB1TXIFG0 */ +#define DMA0TSEL__ADC12IFG (0x001A) /* DMA channel 0 transfer select 26: ADC12IFG */ +#define DMA0TSEL__RES27 (0x001B) /* DMA channel 0 transfer select 27: RES27 */ +//#define DMA0TSEL__RES28 (0x001C) /* DMA channel 0 transfer select 28: RES28 */ +#define DMA0TSEL__ESI (0x001C) /* DMA channel 0 transfer select 28: ESI */ +#define DMA0TSEL__MPY (0x001D) /* DMA channel 0 transfer select 29: MPY */ +#define DMA0TSEL__DMA2IFG (0x001E) /* DMA channel 0 transfer select 30: previous DMA channel DMA2IFG */ +#define DMA0TSEL__DMAE0 (0x001F) /* DMA channel 0 transfer select 31: ext. Trigger (DMAE0) */ + +#define DMA1TSEL__DMAREQ (0x0000) /* DMA channel 1 transfer select 0: DMA_REQ (sw) */ +#define DMA1TSEL__TA0CCR0 (0x0100) /* DMA channel 1 transfer select 1: TA0CCR0 */ +#define DMA1TSEL__TA0CCR2 (0x0200) /* DMA channel 1 transfer select 2: TA0CCR2 */ +#define DMA1TSEL__TA1CCR0 (0x0300) /* DMA channel 1 transfer select 3: TA1CCR0 */ +#define DMA1TSEL__TA1CCR2 (0x0400) /* DMA channel 1 transfer select 4: TA1CCR2 */ +#define DMA1TSEL__TA2CCR0 (0x0500) /* DMA channel 1 transfer select 5: TA2CCR0 */ +#define DMA1TSEL__TA3CCR0 (0x0600) /* DMA channel 1 transfer select 6: TA3CCR0 */ +#define DMA1TSEL__TB0CCR0 (0x0700) /* DMA channel 1 transfer select 7: TB0CCR0 */ +#define DMA1TSEL__TB0CCR2 (0x0800) /* DMA channel 1 transfer select 8: TB0CCR2 */ +#define DMA1TSEL__RES9 (0x0900) /* DMA channel 1 transfer select 9: RES9 */ +#define DMA1TSEL__RES10 (0x0A00) /* DMA channel 1 transfer select 10: RES10 */ +#define DMA1TSEL__AES_Trigger_0 (0x0B00) /* DMA channel 1 transfer select 11: AES Trigger 0 */ +#define DMA1TSEL__AES_Trigger_1 (0x0C00) /* DMA channel 1 transfer select 12: AES Trigger 1 */ +#define DMA1TSEL__AES_Trigger_2 (0x0D00) /* DMA channel 1 transfer select 13: AES Trigger 2 */ +#define DMA1TSEL__UCA0RXIFG (0x0E00) /* DMA channel 1 transfer select 14: UCA0RXIFG */ +#define DMA1TSEL__UCA0TXIFG (0x0F00) /* DMA channel 1 transfer select 15: UCA0TXIFG */ +#define DMA1TSEL__UCA1RXIFG (0x1000) /* DMA channel 1 transfer select 16: UCA1RXIFG */ +#define DMA1TSEL__UCA1TXIFG (0x1100) /* DMA channel 1 transfer select 17: UCA1TXIFG */ +#define DMA1TSEL__UCB0RXIFG0 (0x1200) /* DMA channel 1 transfer select 18: UCB0RXIFG0 */ +#define DMA1TSEL__UCB0TXIFG0 (0x1300) /* DMA channel 1 transfer select 19: UCB0TXIFG0 */ +#define DMA1TSEL__UCB0RXIFG1 (0x1400) /* DMA channel 1 transfer select 20: UCB0RXIFG1 */ +#define DMA1TSEL__UCB0TXIFG1 (0x1500) /* DMA channel 1 transfer select 21: UCB0TXIFG1 */ +#define DMA1TSEL__UCB0RXIFG2 (0x1600) /* DMA channel 1 transfer select 22: UCB0RXIFG2 */ +#define DMA1TSEL__UCB0TXIFG2 (0x1700) /* DMA channel 1 transfer select 23: UCB0TXIFG2 */ +#define DMA1TSEL__UCB1RXIFG0 (0x1800) /* DMA channel 1 transfer select 24: UCB1RXIFG0 */ +#define DMA1TSEL__UCB1TXIFG0 (0x1900) /* DMA channel 1 transfer select 25: UCB1TXIFG0 */ +#define DMA1TSEL__ADC12IFG (0x1A00) /* DMA channel 1 transfer select 26: ADC12IFG */ +#define DMA1TSEL__RES27 (0x1B00) /* DMA channel 1 transfer select 27: RES27 */ +#define DMA1TSEL__ESI (0x1C00) /* DMA channel 1 transfer select 28: ESI */ +#define DMA1TSEL__MPY (0x1D00) /* DMA channel 1 transfer select 29: MPY */ +#define DMA1TSEL__DMA0IFG (0x1E00) /* DMA channel 1 transfer select 30: previous DMA channel DMA0IFG */ +#define DMA1TSEL__DMAE0 (0x1F00) /* DMA channel 1 transfer select 31: ext. Trigger (DMAE0) */ + +#define DMA2TSEL__DMAREQ (0x0000) /* DMA channel 2 transfer select 0: DMA_REQ (sw) */ +#define DMA2TSEL__TA0CCR0 (0x0001) /* DMA channel 2 transfer select 1: TA0CCR0 */ +#define DMA2TSEL__TA0CCR2 (0x0002) /* DMA channel 2 transfer select 2: TA0CCR2 */ +#define DMA2TSEL__TA1CCR0 (0x0003) /* DMA channel 2 transfer select 3: TA1CCR0 */ +#define DMA2TSEL__TA1CCR2 (0x0004) /* DMA channel 2 transfer select 4: TA1CCR2 */ +#define DMA2TSEL__TA2CCR0 (0x0005) /* DMA channel 2 transfer select 5: TA2CCR0 */ +#define DMA2TSEL__TA3CCR0 (0x0006) /* DMA channel 2 transfer select 6: TA3CCR0 */ +#define DMA2TSEL__TB0CCR0 (0x0007) /* DMA channel 2 transfer select 7: TB0CCR0 */ +#define DMA2TSEL__TB0CCR2 (0x0008) /* DMA channel 2 transfer select 8: TB0CCR2 */ +#define DMA2TSEL__RES9 (0x0009) /* DMA channel 2 transfer select 9: RES9 */ +#define DMA2TSEL__RES10 (0x000A) /* DMA channel 2 transfer select 10: RES10 */ +#define DMA2TSEL__AES_Trigger_0 (0x000B) /* DMA channel 2 transfer select 11: AES Trigger 0 */ +#define DMA2TSEL__AES_Trigger_1 (0x000C) /* DMA channel 2 transfer select 12: AES Trigger 1 */ +#define DMA2TSEL__AES_Trigger_2 (0x000D) /* DMA channel 2 transfer select 13: AES Trigger 2 */ +#define DMA2TSEL__UCA0RXIFG (0x000E) /* DMA channel 2 transfer select 14: UCA0RXIFG */ +#define DMA2TSEL__UCA0TXIFG (0x000F) /* DMA channel 2 transfer select 15: UCA0TXIFG */ +#define DMA2TSEL__UCA1RXIFG (0x0010) /* DMA channel 2 transfer select 16: UCA1RXIFG */ +#define DMA2TSEL__UCA1TXIFG (0x0011) /* DMA channel 2 transfer select 17: UCA1TXIFG */ +#define DMA2TSEL__UCB0RXIFG0 (0x0012) /* DMA channel 2 transfer select 18: UCB0RXIFG0 */ +#define DMA2TSEL__UCB0TXIFG0 (0x0013) /* DMA channel 2 transfer select 19: UCB0TXIFG0 */ +#define DMA2TSEL__UCB0RXIFG1 (0x0014) /* DMA channel 2 transfer select 20: UCB0RXIFG1 */ +#define DMA2TSEL__UCB0TXIFG1 (0x0015) /* DMA channel 2 transfer select 21: UCB0TXIFG1 */ +#define DMA2TSEL__UCB0RXIFG2 (0x0016) /* DMA channel 2 transfer select 22: UCB0RXIFG2 */ +#define DMA2TSEL__UCB0TXIFG2 (0x0017) /* DMA channel 2 transfer select 23: UCB0TXIFG2 */ +#define DMA2TSEL__UCB1RXIFG0 (0x0018) /* DMA channel 2 transfer select 24: UCB1RXIFG0 */ +#define DMA2TSEL__UCB1TXIFG0 (0x0019) /* DMA channel 2 transfer select 25: UCB1TXIFG0 */ +#define DMA2TSEL__ADC12IFG (0x001A) /* DMA channel 2 transfer select 26: ADC12IFG */ +#define DMA2TSEL__RES27 (0x001B) /* DMA channel 2 transfer select 27: RES27 */ +#define DMA2TSEL__ESI (0x001C) /* DMA channel 2 transfer select 28: ESI */ +#define DMA2TSEL__MPY (0x001D) /* DMA channel 2 transfer select 29: MPY */ +#define DMA2TSEL__DMA1IFG (0x001E) /* DMA channel 2 transfer select 30: previous DMA channel DMA1IFG */ +#define DMA2TSEL__DMAE0 (0x001F) /* DMA channel 2 transfer select 31: ext. Trigger (DMAE0) */ + +/************************************************************ +* EXTENDED SCAN INTERFACE +************************************************************/ +#define __MSP430_HAS_ESI__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_ESI__ 0x0D00 +#define ESI_BASE __MSP430_BASEADDRESS_ESI__ + +sfr_w(ESIDEBUG1); /* ESI debug register 1 */ +sfr_b(ESIDEBUG1_L); /* ESI debug register 1 */ +sfr_b(ESIDEBUG1_H); /* ESI debug register 1 */ +sfr_w(ESIDEBUG2); /* ESI debug register 2 */ +sfr_b(ESIDEBUG2_L); /* ESI debug register 2 */ +sfr_b(ESIDEBUG2_H); /* ESI debug register 2 */ +sfr_w(ESIDEBUG3); /* ESI debug register 3 */ +sfr_b(ESIDEBUG3_L); /* ESI debug register 3 */ +sfr_b(ESIDEBUG3_H); /* ESI debug register 3 */ +sfr_w(ESIDEBUG4); /* ESI debug register 4 */ +sfr_b(ESIDEBUG4_L); /* ESI debug register 4 */ +sfr_b(ESIDEBUG4_H); /* ESI debug register 4 */ +sfr_w(ESIDEBUG5); /* ESI debug register 5 */ +sfr_b(ESIDEBUG5_L); /* ESI debug register 5 */ +sfr_b(ESIDEBUG5_H); /* ESI debug register 5 */ +sfr_w(ESICNT0); /* ESI PSM counter 0 */ +sfr_b(ESICNT0_L); /* ESI PSM counter 0 */ +sfr_b(ESICNT0_H); /* ESI PSM counter 0 */ +sfr_w(ESICNT1); /* ESI PSM counter 1 */ +sfr_b(ESICNT1_L); /* ESI PSM counter 1 */ +sfr_b(ESICNT1_H); /* ESI PSM counter 1 */ +sfr_w(ESICNT2); /* ESI PSM counter 2 */ +sfr_b(ESICNT2_L); /* ESI PSM counter 2 */ +sfr_b(ESICNT2_H); /* ESI PSM counter 2 */ +sfr_w(ESICNT3); /* ESI oscillator counter register */ +sfr_b(ESICNT3_L); /* ESI oscillator counter register */ +sfr_b(ESICNT3_H); /* ESI oscillator counter register */ +sfr_w(ESIIV); /* ESI interrupt vector */ +sfr_b(ESIIV_L); /* ESI interrupt vector */ +sfr_b(ESIIV_H); /* ESI interrupt vector */ +sfr_w(ESIINT1); /* ESI interrupt register 1 */ +sfr_b(ESIINT1_L); /* ESI interrupt register 1 */ +sfr_b(ESIINT1_H); /* ESI interrupt register 1 */ +sfr_w(ESIINT2); /* ESI interrupt register 2 */ +sfr_b(ESIINT2_L); /* ESI interrupt register 2 */ +sfr_b(ESIINT2_H); /* ESI interrupt register 2 */ +sfr_w(ESIAFE); /* ESI AFE control register */ +sfr_b(ESIAFE_L); /* ESI AFE control register */ +sfr_b(ESIAFE_H); /* ESI AFE control register */ +sfr_w(ESIPPU); /* ESI PPU control register */ +sfr_b(ESIPPU_L); /* ESI PPU control register */ +sfr_b(ESIPPU_H); /* ESI PPU control register */ +sfr_w(ESITSM); /* ESI TSM control register */ +sfr_b(ESITSM_L); /* ESI TSM control register */ +sfr_b(ESITSM_H); /* ESI TSM control register */ +sfr_w(ESIPSM); /* ESI PSM control register */ +sfr_b(ESIPSM_L); /* ESI PSM control register */ +sfr_b(ESIPSM_H); /* ESI PSM control register */ +sfr_w(ESIOSC); /* ESI oscillator control register*/ +sfr_b(ESIOSC_L); /* ESI oscillator control register*/ +sfr_b(ESIOSC_H); /* ESI oscillator control register*/ +sfr_w(ESICTL); /* ESI control register */ +sfr_b(ESICTL_L); /* ESI control register */ +sfr_b(ESICTL_H); /* ESI control register */ +sfr_w(ESITHR1); /* ESI PSM Counter Threshold 1 register */ +sfr_b(ESITHR1_L); /* ESI PSM Counter Threshold 1 register */ +sfr_b(ESITHR1_H); /* ESI PSM Counter Threshold 1 register */ +sfr_w(ESITHR2); /* ESI PSM Counter Threshold 2 register */ +sfr_b(ESITHR2_L); /* ESI PSM Counter Threshold 2 register */ +sfr_b(ESITHR2_H); /* ESI PSM Counter Threshold 2 register */ +sfr_w(ESIDAC1R0); /* ESI DAC1 register 0 */ +sfr_b(ESIDAC1R0_L); /* ESI DAC1 register 0 */ +sfr_b(ESIDAC1R0_H); /* ESI DAC1 register 0 */ +sfr_w(ESIDAC1R1); /* ESI DAC1 register 1 */ +sfr_b(ESIDAC1R1_L); /* ESI DAC1 register 1 */ +sfr_b(ESIDAC1R1_H); /* ESI DAC1 register 1 */ +sfr_w(ESIDAC1R2); /* ESI DAC1 register 2 */ +sfr_b(ESIDAC1R2_L); /* ESI DAC1 register 2 */ +sfr_b(ESIDAC1R2_H); /* ESI DAC1 register 2 */ +sfr_w(ESIDAC1R3); /* ESI DAC1 register 3 */ +sfr_b(ESIDAC1R3_L); /* ESI DAC1 register 3 */ +sfr_b(ESIDAC1R3_H); /* ESI DAC1 register 3 */ +sfr_w(ESIDAC1R4); /* ESI DAC1 register 4 */ +sfr_b(ESIDAC1R4_L); /* ESI DAC1 register 4 */ +sfr_b(ESIDAC1R4_H); /* ESI DAC1 register 4 */ +sfr_w(ESIDAC1R5); /* ESI DAC1 register 5 */ +sfr_b(ESIDAC1R5_L); /* ESI DAC1 register 5 */ +sfr_b(ESIDAC1R5_H); /* ESI DAC1 register 5 */ +sfr_w(ESIDAC1R6); /* ESI DAC1 register 6 */ +sfr_b(ESIDAC1R6_L); /* ESI DAC1 register 6 */ +sfr_b(ESIDAC1R6_H); /* ESI DAC1 register 6 */ +sfr_w(ESIDAC1R7); /* ESI DAC1 register 7 */ +sfr_b(ESIDAC1R7_L); /* ESI DAC1 register 7 */ +sfr_b(ESIDAC1R7_H); /* ESI DAC1 register 7 */ +sfr_w(ESIDAC2R0); /* ESI DAC2 register 0 */ +sfr_b(ESIDAC2R0_L); /* ESI DAC2 register 0 */ +sfr_b(ESIDAC2R0_H); /* ESI DAC2 register 0 */ +sfr_w(ESIDAC2R1); /* ESI DAC2 register 1 */ +sfr_b(ESIDAC2R1_L); /* ESI DAC2 register 1 */ +sfr_b(ESIDAC2R1_H); /* ESI DAC2 register 1 */ +sfr_w(ESIDAC2R2); /* ESI DAC2 register 2 */ +sfr_b(ESIDAC2R2_L); /* ESI DAC2 register 2 */ +sfr_b(ESIDAC2R2_H); /* ESI DAC2 register 2 */ +sfr_w(ESIDAC2R3); /* ESI DAC2 register 3 */ +sfr_b(ESIDAC2R3_L); /* ESI DAC2 register 3 */ +sfr_b(ESIDAC2R3_H); /* ESI DAC2 register 3 */ +sfr_w(ESIDAC2R4); /* ESI DAC2 register 4 */ +sfr_b(ESIDAC2R4_L); /* ESI DAC2 register 4 */ +sfr_b(ESIDAC2R4_H); /* ESI DAC2 register 4 */ +sfr_w(ESIDAC2R5); /* ESI DAC2 register 5 */ +sfr_b(ESIDAC2R5_L); /* ESI DAC2 register 5 */ +sfr_b(ESIDAC2R5_H); /* ESI DAC2 register 5 */ +sfr_w(ESIDAC2R6); /* ESI DAC2 register 6 */ +sfr_b(ESIDAC2R6_L); /* ESI DAC2 register 6 */ +sfr_b(ESIDAC2R6_H); /* ESI DAC2 register 6 */ +sfr_w(ESIDAC2R7); /* ESI DAC2 register 7 */ +sfr_b(ESIDAC2R7_L); /* ESI DAC2 register 7 */ +sfr_b(ESIDAC2R7_H); /* ESI DAC2 register 7 */ +sfr_w(ESITSM0); /* ESI TSM 0 */ +sfr_b(ESITSM0_L); /* ESI TSM 0 */ +sfr_b(ESITSM0_H); /* ESI TSM 0 */ +sfr_w(ESITSM1); /* ESI TSM 1 */ +sfr_b(ESITSM1_L); /* ESI TSM 1 */ +sfr_b(ESITSM1_H); /* ESI TSM 1 */ +sfr_w(ESITSM2); /* ESI TSM 2 */ +sfr_b(ESITSM2_L); /* ESI TSM 2 */ +sfr_b(ESITSM2_H); /* ESI TSM 2 */ +sfr_w(ESITSM3); /* ESI TSM 3 */ +sfr_b(ESITSM3_L); /* ESI TSM 3 */ +sfr_b(ESITSM3_H); /* ESI TSM 3 */ +sfr_w(ESITSM4); /* ESI TSM 4 */ +sfr_b(ESITSM4_L); /* ESI TSM 4 */ +sfr_b(ESITSM4_H); /* ESI TSM 4 */ +sfr_w(ESITSM5); /* ESI TSM 5 */ +sfr_b(ESITSM5_L); /* ESI TSM 5 */ +sfr_b(ESITSM5_H); /* ESI TSM 5 */ +sfr_w(ESITSM6); /* ESI TSM 6 */ +sfr_b(ESITSM6_L); /* ESI TSM 6 */ +sfr_b(ESITSM6_H); /* ESI TSM 6 */ +sfr_w(ESITSM7); /* ESI TSM 7 */ +sfr_b(ESITSM7_L); /* ESI TSM 7 */ +sfr_b(ESITSM7_H); /* ESI TSM 7 */ +sfr_w(ESITSM8); /* ESI TSM 8 */ +sfr_b(ESITSM8_L); /* ESI TSM 8 */ +sfr_b(ESITSM8_H); /* ESI TSM 8 */ +sfr_w(ESITSM9); /* ESI TSM 9 */ +sfr_b(ESITSM9_L); /* ESI TSM 9 */ +sfr_b(ESITSM9_H); /* ESI TSM 9 */ +sfr_w(ESITSM10); /* ESI TSM 10 */ +sfr_b(ESITSM10_L); /* ESI TSM 10 */ +sfr_b(ESITSM10_H); /* ESI TSM 10 */ +sfr_w(ESITSM11); /* ESI TSM 11 */ +sfr_b(ESITSM11_L); /* ESI TSM 11 */ +sfr_b(ESITSM11_H); /* ESI TSM 11 */ +sfr_w(ESITSM12); /* ESI TSM 12 */ +sfr_b(ESITSM12_L); /* ESI TSM 12 */ +sfr_b(ESITSM12_H); /* ESI TSM 12 */ +sfr_w(ESITSM13); /* ESI TSM 13 */ +sfr_b(ESITSM13_L); /* ESI TSM 13 */ +sfr_b(ESITSM13_H); /* ESI TSM 13 */ +sfr_w(ESITSM14); /* ESI TSM 14 */ +sfr_b(ESITSM14_L); /* ESI TSM 14 */ +sfr_b(ESITSM14_H); /* ESI TSM 14 */ +sfr_w(ESITSM15); /* ESI TSM 15 */ +sfr_b(ESITSM15_L); /* ESI TSM 15 */ +sfr_b(ESITSM15_H); /* ESI TSM 15 */ +sfr_w(ESITSM16); /* ESI TSM 16 */ +sfr_b(ESITSM16_L); /* ESI TSM 16 */ +sfr_b(ESITSM16_H); /* ESI TSM 16 */ +sfr_w(ESITSM17); /* ESI TSM 17 */ +sfr_b(ESITSM17_L); /* ESI TSM 17 */ +sfr_b(ESITSM17_H); /* ESI TSM 17 */ +sfr_w(ESITSM18); /* ESI TSM 18 */ +sfr_b(ESITSM18_L); /* ESI TSM 18 */ +sfr_b(ESITSM18_H); /* ESI TSM 18 */ +sfr_w(ESITSM19); /* ESI TSM 19 */ +sfr_b(ESITSM19_L); /* ESI TSM 19 */ +sfr_b(ESITSM19_H); /* ESI TSM 19 */ +sfr_w(ESITSM20); /* ESI TSM 20 */ +sfr_b(ESITSM20_L); /* ESI TSM 20 */ +sfr_b(ESITSM20_H); /* ESI TSM 20 */ +sfr_w(ESITSM21); /* ESI TSM 21 */ +sfr_b(ESITSM21_L); /* ESI TSM 21 */ +sfr_b(ESITSM21_H); /* ESI TSM 21 */ +sfr_w(ESITSM22); /* ESI TSM 22 */ +sfr_b(ESITSM22_L); /* ESI TSM 22 */ +sfr_b(ESITSM22_H); /* ESI TSM 22 */ +sfr_w(ESITSM23); /* ESI TSM 23 */ +sfr_b(ESITSM23_L); /* ESI TSM 23 */ +sfr_b(ESITSM23_H); /* ESI TSM 23 */ +sfr_w(ESITSM24); /* ESI TSM 24 */ +sfr_b(ESITSM24_L); /* ESI TSM 24 */ +sfr_b(ESITSM24_H); /* ESI TSM 24 */ +sfr_w(ESITSM25); /* ESI TSM 25 */ +sfr_b(ESITSM25_L); /* ESI TSM 25 */ +sfr_b(ESITSM25_H); /* ESI TSM 25 */ +sfr_w(ESITSM26); /* ESI TSM 26 */ +sfr_b(ESITSM26_L); /* ESI TSM 26 */ +sfr_b(ESITSM26_H); /* ESI TSM 26 */ +sfr_w(ESITSM27); /* ESI TSM 27 */ +sfr_b(ESITSM27_L); /* ESI TSM 27 */ +sfr_b(ESITSM27_H); /* ESI TSM 27 */ +sfr_w(ESITSM28); /* ESI TSM 28 */ +sfr_b(ESITSM28_L); /* ESI TSM 28 */ +sfr_b(ESITSM28_H); /* ESI TSM 28 */ +sfr_w(ESITSM29); /* ESI TSM 29 */ +sfr_b(ESITSM29_L); /* ESI TSM 29 */ +sfr_b(ESITSM29_H); /* ESI TSM 29 */ +sfr_w(ESITSM30); /* ESI TSM 30 */ +sfr_b(ESITSM30_L); /* ESI TSM 30 */ +sfr_b(ESITSM30_H); /* ESI TSM 30 */ +sfr_w(ESITSM31); /* ESI TSM 31 */ +sfr_b(ESITSM31_L); /* ESI TSM 31 */ +sfr_b(ESITSM31_H); /* ESI TSM 31 */ + +/* ESIIV Control Bits */ + +#define ESIIV_NONE (0x0000) /* No ESI Interrupt Pending */ +#define ESIIV_ESIIFG1 (0x0002) /* rising edge of the ESISTOP(tsm) */ +#define ESIIV_ESIIFG0 (0x0004) /* ESIOUT0 to ESIOUT3 conditions selected by ESIIFGSETx bits */ +#define ESIIV_ESIIFG8 (0x0006) /* ESIOUT4 to ESIOUT7 conditions selected by ESIIFGSET2x bits */ +#define ESIIV_ESIIFG3 (0x0008) /* ESICNT1 counter conditions selected with the ESITHR1 and ESITHR2 registers */ +#define ESIIV_ESIIFG6 (0x000A) /* PSM transitions to a state with a Q7 bit */ +#define ESIIV_ESIIFG5 (0x000C) /* PSM transitions to a state with a Q6 bit */ +#define ESIIV_ESIIFG4 (0x000E) /* ESICNT2 counter conditions selected with the ESIIS2x bits */ +#define ESIIV_ESIIFG7 (0x0010) /* ESICNT0 counter conditions selected with the ESIIS0x bits */ +#define ESIIV_ESIIFG2 (0x0012) /* start of a TSM sequence */ + +/* ESIINT1 Control Bits */ +#define ESIIFGSET22 (0x8000) /* ESIIFG8 interrupt flag source */ +#define ESIIFGSET21 (0x4000) /* ESIIFG8 interrupt flag source */ +#define ESIIFGSET20 (0x2000) /* ESIIFG8 interrupt flag source */ +#define ESIIFGSET12 (0x1000) /* ESIIFG0 interrupt flag source */ +#define ESIIFGSET11 (0x0800) /* ESIIFG0 interrupt flag source */ +#define ESIIFGSET10 (0x0400) /* ESIIFG0 interrupt flag source */ +#define ESIIE8 (0x0100) /* Interrupt enable */ +#define ESIIE7 (0x0080) /* Interrupt enable */ +#define ESIIE6 (0x0040) /* Interrupt enable */ +#define ESIIE5 (0x0020) /* Interrupt enable */ +#define ESIIE4 (0x0010) /* Interrupt enable */ +#define ESIIE3 (0x0008) /* Interrupt enable */ +#define ESIIE2 (0x0004) /* Interrupt enable */ +#define ESIIE1 (0x0002) /* Interrupt enable */ +#define ESIIE0 (0x0001) /* Interrupt enable */ + +/* ESIINT1 Control Bits */ +#define ESIIE7_L (0x0080) /* Interrupt enable */ +#define ESIIE6_L (0x0040) /* Interrupt enable */ +#define ESIIE5_L (0x0020) /* Interrupt enable */ +#define ESIIE4_L (0x0010) /* Interrupt enable */ +#define ESIIE3_L (0x0008) /* Interrupt enable */ +#define ESIIE2_L (0x0004) /* Interrupt enable */ +#define ESIIE1_L (0x0002) /* Interrupt enable */ +#define ESIIE0_L (0x0001) /* Interrupt enable */ + +/* ESIINT1 Control Bits */ +#define ESIIFGSET22_H (0x0080) /* ESIIFG8 interrupt flag source */ +#define ESIIFGSET21_H (0x0040) /* ESIIFG8 interrupt flag source */ +#define ESIIFGSET20_H (0x0020) /* ESIIFG8 interrupt flag source */ +#define ESIIFGSET12_H (0x0010) /* ESIIFG0 interrupt flag source */ +#define ESIIFGSET11_H (0x0008) /* ESIIFG0 interrupt flag source */ +#define ESIIFGSET10_H (0x0004) /* ESIIFG0 interrupt flag source */ +#define ESIIE8_H (0x0001) /* Interrupt enable */ + +#define ESIIFGSET2_0 (0x0000) /* ESIIFG8 is set when ESIOUT4 is set */ +#define ESIIFGSET2_1 (0x2000) /* ESIIFG8 is set when ESIOUT4 is reset */ +#define ESIIFGSET2_2 (0x4000) /* ESIIFG8 is set when ESIOUT5 is set */ +#define ESIIFGSET2_3 (0x6000) /* ESIIFG8 is set when ESIOUT5 is reset */ +#define ESIIFGSET2_4 (0x8000) /* ESIIFG8 is set when ESIOUT6 is set */ +#define ESIIFGSET2_5 (0xA000) /* ESIIFG8 is set when ESIOUT6 is reset */ +#define ESIIFGSET2_6 (0xC000) /* ESIIFG8 is set when ESIOUT7 is set */ +#define ESIIFGSET2_7 (0xE000) /* ESIIFG8 is set when ESIOUT7 is reset */ +#define ESIIFGSET1_0 (0x0000) /* ESIIFG0 is set when ESIOUT0 is set */ +#define ESIIFGSET1_1 (0x0400) /* ESIIFG0 is set when ESIOUT0 is reset */ +#define ESIIFGSET1_2 (0x0800) /* ESIIFG0 is set when ESIOUT1 is set */ +#define ESIIFGSET1_3 (0x0C00) /* ESIIFG0 is set when ESIOUT1 is reset */ +#define ESIIFGSET1_4 (0x1000) /* ESIIFG0 is set when ESIOUT2 is set */ +#define ESIIFGSET1_5 (0x1400) /* ESIIFG0 is set when ESIOUT2 is reset */ +#define ESIIFGSET1_6 (0x1800) /* ESIIFG0 is set when ESIOUT3 is set */ +#define ESIIFGSET1_7 (0x1C00) /* ESIIFG0 is set when ESIOUT3 is reset */ + +/* ESIINT2 Control Bits */ +#define ESIIS21 (0x4000) /* SIFIFG4 interrupt flag source */ +#define ESIIS20 (0x2000) /* SIFIFG4 interrupt flag source */ +#define ESIIS01 (0x0800) /* SIFIFG7 interrupt flag source */ +#define ESIIS00 (0x0400) /* SIFIFG7 interrupt flag source */ +#define ESIIFG8 (0x0100) /* ESIIFG8 interrupt pending */ +#define ESIIFG7 (0x0080) /* ESIIFG7 interrupt pending */ +#define ESIIFG6 (0x0040) /* ESIIFG6 interrupt pending */ +#define ESIIFG5 (0x0020) /* ESIIFG5 interrupt pending */ +#define ESIIFG4 (0x0010) /* ESIIFG4 interrupt pending */ +#define ESIIFG3 (0x0008) /* ESIIFG3 interrupt pending */ +#define ESIIFG2 (0x0004) /* ESIIFG2 interrupt pending */ +#define ESIIFG1 (0x0002) /* ESIIFG1 interrupt pending */ +#define ESIIFG0 (0x0001) /* ESIIFG0 interrupt pending */ + +/* ESIINT2 Control Bits */ +#define ESIIFG7_L (0x0080) /* ESIIFG7 interrupt pending */ +#define ESIIFG6_L (0x0040) /* ESIIFG6 interrupt pending */ +#define ESIIFG5_L (0x0020) /* ESIIFG5 interrupt pending */ +#define ESIIFG4_L (0x0010) /* ESIIFG4 interrupt pending */ +#define ESIIFG3_L (0x0008) /* ESIIFG3 interrupt pending */ +#define ESIIFG2_L (0x0004) /* ESIIFG2 interrupt pending */ +#define ESIIFG1_L (0x0002) /* ESIIFG1 interrupt pending */ +#define ESIIFG0_L (0x0001) /* ESIIFG0 interrupt pending */ + +/* ESIINT2 Control Bits */ +#define ESIIS21_H (0x0040) /* SIFIFG4 interrupt flag source */ +#define ESIIS20_H (0x0020) /* SIFIFG4 interrupt flag source */ +#define ESIIS01_H (0x0008) /* SIFIFG7 interrupt flag source */ +#define ESIIS00_H (0x0004) /* SIFIFG7 interrupt flag source */ +#define ESIIFG8_H (0x0001) /* ESIIFG8 interrupt pending */ + +#define ESIIS2_0 (0x0000) /* SIFIFG4 interrupt flag source: SIFCNT2 */ +#define ESIIS2_1 (0x2000) /* SIFIFG4 interrupt flag source: SIFCNT2 MOD 4 */ +#define ESIIS2_2 (0x4000) /* SIFIFG4 interrupt flag source: SIFCNT2 MOD 256 */ +#define ESIIS2_3 (0x6000) /* SIFIFG4 interrupt flag source: SIFCNT2 decrements from 01h to 00h */ +#define ESIIS0_0 (0x0000) /* SIFIFG7 interrupt flag source: SIFCNT0 */ +#define ESIIS0_1 (0x0400) /* SIFIFG7 interrupt flag source: SIFCNT0 MOD 4 */ +#define ESIIS0_2 (0x0800) /* SIFIFG7 interrupt flag source: SIFCNT0 MOD 256 */ +#define ESIIS0_3 (0x0C00) /* SIFIFG7 interrupt flag source: SIFCNT0 increments from FFFFh to 00h */ + +/* ESIAFE Control Bits */ +#define ESIDAC2EN (0x0800) /* Enable ESIDAC(tsm) control for DAC in AFE2 */ +#define ESICA2EN (0x0400) /* Enable ESICA(tsm) control for comparator in AFE2 */ +#define ESICA2INV (0x0200) /* Invert AFE2's comparator output */ +#define ESICA1INV (0x0100) /* Invert AFE1's comparator output */ +#define ESICA2X (0x0080) /* AFE2's comparator input select */ +#define ESICA1X (0x0040) /* AFE1's comparator input select */ +#define ESICISEL (0x0020) /* Comparator input select for AFE1 only */ +#define ESICACI3 (0x0010) /* Comparator input select for AFE1 only */ +#define ESISHTSM (0x0008) /* Sample-and-hold ESIVSS select */ +#define ESIVMIDEN (0x0004) /* Mid-voltage generator */ +#define ESISH (0x0002) /* Sample-and-hold enable */ +#define ESITEN (0x0001) /* Excitation enable */ + +/* ESIAFE Control Bits */ +#define ESICA2X_L (0x0080) /* AFE2's comparator input select */ +#define ESICA1X_L (0x0040) /* AFE1's comparator input select */ +#define ESICISEL_L (0x0020) /* Comparator input select for AFE1 only */ +#define ESICACI3_L (0x0010) /* Comparator input select for AFE1 only */ +#define ESISHTSM_L (0x0008) /* Sample-and-hold ESIVSS select */ +#define ESIVMIDEN_L (0x0004) /* Mid-voltage generator */ +#define ESISH_L (0x0002) /* Sample-and-hold enable */ +#define ESITEN_L (0x0001) /* Excitation enable */ + +/* ESIAFE Control Bits */ +#define ESIDAC2EN_H (0x0008) /* Enable ESIDAC(tsm) control for DAC in AFE2 */ +#define ESICA2EN_H (0x0004) /* Enable ESICA(tsm) control for comparator in AFE2 */ +#define ESICA2INV_H (0x0002) /* Invert AFE2's comparator output */ +#define ESICA1INV_H (0x0001) /* Invert AFE1's comparator output */ + +#define ESIVSS (0x0008) /* legacy define: Sample-and-hold ESIVSS select */ +#define ESIVCC2 (0x0004) /* legacy define: Mid-voltage generator */ + +/* ESIPPU Control Bits */ +#define ESITCHOUT1 (0x0200) /* Latched AFE1 comparator output for test channel 1 */ +#define ESITCHOUT0 (0x0100) /* Lachted AFE1 comparator output for test channel 0 */ +#define ESIOUT7 (0x0080) /* Latched AFE2 comparator output when ESICH3 input is selected */ +#define ESIOUT6 (0x0040) /* Latched AFE2 comparator output when ESICH2 input is selected */ +#define ESIOUT5 (0x0020) /* Latched AFE2 comparator output when ESICH1 input is selected */ +#define ESIOUT4 (0x0010) /* Latched AFE2 comparator output when ESICH0 input is selected */ +#define ESIOUT3 (0x0008) /* Latched AFE1 comparator output when ESICH3 input is selected */ +#define ESIOUT2 (0x0004) /* Latched AFE1 comparator output when ESICH2 input is selected */ +#define ESIOUT1 (0x0002) /* Latched AFE1 comparator output when ESICH1 input is selected */ +#define ESIOUT0 (0x0001) /* Latched AFE1 comparator output when ESICH0 input is selected */ + +/* ESIPPU Control Bits */ +#define ESIOUT7_L (0x0080) /* Latched AFE2 comparator output when ESICH3 input is selected */ +#define ESIOUT6_L (0x0040) /* Latched AFE2 comparator output when ESICH2 input is selected */ +#define ESIOUT5_L (0x0020) /* Latched AFE2 comparator output when ESICH1 input is selected */ +#define ESIOUT4_L (0x0010) /* Latched AFE2 comparator output when ESICH0 input is selected */ +#define ESIOUT3_L (0x0008) /* Latched AFE1 comparator output when ESICH3 input is selected */ +#define ESIOUT2_L (0x0004) /* Latched AFE1 comparator output when ESICH2 input is selected */ +#define ESIOUT1_L (0x0002) /* Latched AFE1 comparator output when ESICH1 input is selected */ +#define ESIOUT0_L (0x0001) /* Latched AFE1 comparator output when ESICH0 input is selected */ + +/* ESIPPU Control Bits */ +#define ESITCHOUT1_H (0x0002) /* Latched AFE1 comparator output for test channel 1 */ +#define ESITCHOUT0_H (0x0001) /* Lachted AFE1 comparator output for test channel 0 */ + +/* ESITSM Control Bits */ +#define ESICLKAZSEL (0x4000) /* Functionality selection of ESITSMx bit5 */ +#define ESITSMTRG1 (0x2000) /* TSM start trigger selection */ +#define ESITSMTRG0 (0x1000) /* TSM start trigger selection */ +#define ESISTART (0x0800) /* TSM software start trigger */ +#define ESITSMRP (0x0400) /* TSM repeat modee */ +#define ESIDIV3B2 (0x0200) /* TSM start trigger ACLK divider */ +#define ESIDIV3B1 (0x0100) /* TSM start trigger ACLK divider */ +#define ESIDIV3B0 (0x0080) /* TSM start trigger ACLK divider */ +#define ESIDIV3A2 (0x0040) /* TSM start trigger ACLK divider */ +#define ESIDIV3A1 (0x0020) /* TSM start trigger ACLK divider */ +#define ESIDIV3A0 (0x0010) /* TSM start trigger ACLK divider */ +#define ESIDIV21 (0x0008) /* ACLK divider */ +#define ESIDIV20 (0x0004) /* ACLK divider */ +#define ESIDIV11 (0x0002) /* TSM SMCLK divider */ +#define ESIDIV10 (0x0001) /* TSM SMCLK divider */ + +/* ESITSM Control Bits */ +#define ESIDIV3B0_L (0x0080) /* TSM start trigger ACLK divider */ +#define ESIDIV3A2_L (0x0040) /* TSM start trigger ACLK divider */ +#define ESIDIV3A1_L (0x0020) /* TSM start trigger ACLK divider */ +#define ESIDIV3A0_L (0x0010) /* TSM start trigger ACLK divider */ +#define ESIDIV21_L (0x0008) /* ACLK divider */ +#define ESIDIV20_L (0x0004) /* ACLK divider */ +#define ESIDIV11_L (0x0002) /* TSM SMCLK divider */ +#define ESIDIV10_L (0x0001) /* TSM SMCLK divider */ + +/* ESITSM Control Bits */ +#define ESICLKAZSEL_H (0x0040) /* Functionality selection of ESITSMx bit5 */ +#define ESITSMTRG1_H (0x0020) /* TSM start trigger selection */ +#define ESITSMTRG0_H (0x0010) /* TSM start trigger selection */ +#define ESISTART_H (0x0008) /* TSM software start trigger */ +#define ESITSMRP_H (0x0004) /* TSM repeat modee */ +#define ESIDIV3B2_H (0x0002) /* TSM start trigger ACLK divider */ +#define ESIDIV3B1_H (0x0001) /* TSM start trigger ACLK divider */ + +#define ESITSMTRG_0 (0x0000) /* Halt mode */ +#define ESITSMTRG_1 (0x1000) /* TSM start trigger ACLK divider */ +#define ESITSMTRG_2 (0x2000) /* Software trigger for TSM */ +#define ESITSMTRG_3 (0x3000) /* Either the ACLK divider or the ESISTART biT */ +#define ESIDIV3B_0 (0x0000) /* TSM start trigger ACLK divider */ +#define ESIDIV3B_1 (0x0080) /* TSM start trigger ACLK divider */ +#define ESIDIV3B_2 (0x0100) /* TSM start trigger ACLK divider */ +#define ESIDIV3B_3 (0x0180) /* TSM start trigger ACLK divider */ +#define ESIDIV3B_4 (0x0200) /* TSM start trigger ACLK divider */ +#define ESIDIV3B_5 (0x0280) /* TSM start trigger ACLK divider */ +#define ESIDIV3B_6 (0x0300) /* TSM start trigger ACLK divider */ +#define ESIDIV3B_7 (0x0380) /* TSM start trigger ACLK divider */ +#define ESIDIV3A_0 (0x0000) /* TSM start trigger ACLK divider */ +#define ESIDIV3A_1 (0x0010) /* TSM start trigger ACLK divider */ +#define ESIDIV3A_2 (0x0020) /* TSM start trigger ACLK divider */ +#define ESIDIV3A_3 (0x0030) /* TSM start trigger ACLK divider */ +#define ESIDIV3A_4 (0x0040) /* TSM start trigger ACLK divider */ +#define ESIDIV3A_5 (0x0050) /* TSM start trigger ACLK divider */ +#define ESIDIV3A_6 (0x0060) /* TSM start trigger ACLK divider */ +#define ESIDIV3A_7 (0x0070) /* TSM start trigger ACLK divider */ +#define ESIDIV2_0 (0x0000) /* ACLK divider mode: 0 */ +#define ESIDIV2_1 (0x0004) /* ACLK divider mode: 1 */ +#define ESIDIV2_2 (0x0008) /* ACLK divider mode: 2 */ +#define ESIDIV2_3 (0x000C) /* ACLK divider mode: 3 */ +#define ESIDIV2__1 (0x0000) /* ACLK divider = /1 */ +#define ESIDIV2__2 (0x0004) /* ACLK divider = /2 */ +#define ESIDIV2__4 (0x0008) /* ACLK divider = /4 */ +#define ESIDIV2__8 (0x000C) /* ACLK divider = /8 */ +#define ESIDIV1_0 (0x0000) /* TSM SMCLK/ESIOSC divider mode: 0 */ +#define ESIDIV1_1 (0x0001) /* TSM SMCLK/ESIOSC divider mode: 1 */ +#define ESIDIV1_2 (0x0002) /* TSM SMCLK/ESIOSC divider mode: 2 */ +#define ESIDIV1_3 (0x0003) /* TSM SMCLK/ESIOSC divider mode: 3 */ +#define ESIDIV1__1 (0x0000) /* TSM SMCLK/ESIOSC divider = /1 */ +#define ESIDIV1__2 (0x0001) /* TSM SMCLK/ESIOSC divider = /2 */ +#define ESIDIV1__4 (0x0002) /* TSM SMCLK/ESIOSC divider = /4 */ +#define ESIDIV1__8 (0x0003) /* TSM SMCLK/ESIOSC divider = /8 */ + +/* ESIPSM Control Bits */ +#define ESICNT2RST (0x8000) /* ESI Counter 2 reset */ +#define ESICNT1RST (0x4000) /* ESI Counter 1 reset */ +#define ESICNT0RST (0x2000) /* ESI Counter 0 reset */ +#define ESITEST4SEL1 (0x0200) /* Output signal selection for SIFTEST4 pin */ +#define ESITEST4SEL0 (0x0100) /* Output signal selection for SIFTEST4 pin */ +#define ESIV2SEL (0x0080) /* Source Selection for V2 bit*/ +#define ESICNT2EN (0x0020) /* ESICNT2 enable (down counter) */ +#define ESICNT1EN (0x0010) /* ESICNT1 enable (up/down counter) */ +#define ESICNT0EN (0x0008) /* ESICNT0 enable (up counter) */ +#define ESIQ7TRG (0x0004) /* Enabling to use Q7 as trigger for a TSM sequence */ +#define ESIQ6EN (0x0001) /* Q6 enable */ + +/* ESIPSM Control Bits */ +#define ESIV2SEL_L (0x0080) /* Source Selection for V2 bit*/ +#define ESICNT2EN_L (0x0020) /* ESICNT2 enable (down counter) */ +#define ESICNT1EN_L (0x0010) /* ESICNT1 enable (up/down counter) */ +#define ESICNT0EN_L (0x0008) /* ESICNT0 enable (up counter) */ +#define ESIQ7TRG_L (0x0004) /* Enabling to use Q7 as trigger for a TSM sequence */ +#define ESIQ6EN_L (0x0001) /* Q6 enable */ + +/* ESIPSM Control Bits */ +#define ESICNT2RST_H (0x0080) /* ESI Counter 2 reset */ +#define ESICNT1RST_H (0x0040) /* ESI Counter 1 reset */ +#define ESICNT0RST_H (0x0020) /* ESI Counter 0 reset */ +#define ESITEST4SEL1_H (0x0002) /* Output signal selection for SIFTEST4 pin */ +#define ESITEST4SEL0_H (0x0001) /* Output signal selection for SIFTEST4 pin */ + +#define ESITEST4SEL_0 (0x0000) /* Q1 signal from PSM table */ +#define ESITEST4SEL_1 (0x0100) /* Q2 signal from PSM table */ +#define ESITEST4SEL_2 (0x0200) /* TSM clock signal from Timing State Machine */ +#define ESITEST4SEL_3 (0x0300) /* AFE1's comparator output signal Comp1Out */ + +/* ESIOSC Control Bits */ +#define ESICLKFQ5 (0x2000) /* Internal oscillator frequency adjust */ +#define ESICLKFQ4 (0x1000) /* Internal oscillator frequency adjust */ +#define ESICLKFQ3 (0x0800) /* Internal oscillator frequency adjust */ +#define ESICLKFQ2 (0x0400) /* Internal oscillator frequency adjust */ +#define ESICLKFQ1 (0x0200) /* Internal oscillator frequency adjust */ +#define ESICLKFQ0 (0x0100) /* Internal oscillator frequency adjust */ +#define ESICLKGON (0x0002) /* Internal oscillator control */ +#define ESIHFSEL (0x0001) /* Internal oscillator enable */ + +/* ESIOSC Control Bits */ +#define ESICLKGON_L (0x0002) /* Internal oscillator control */ +#define ESIHFSEL_L (0x0001) /* Internal oscillator enable */ + +/* ESIOSC Control Bits */ +#define ESICLKFQ5_H (0x0020) /* Internal oscillator frequency adjust */ +#define ESICLKFQ4_H (0x0010) /* Internal oscillator frequency adjust */ +#define ESICLKFQ3_H (0x0008) /* Internal oscillator frequency adjust */ +#define ESICLKFQ2_H (0x0004) /* Internal oscillator frequency adjust */ +#define ESICLKFQ1_H (0x0002) /* Internal oscillator frequency adjust */ +#define ESICLKFQ0_H (0x0001) /* Internal oscillator frequency adjust */ + +/* ESICTL Control Bits */ +#define ESIS3SEL2 (0x8000) /* PPUS3 source select */ +#define ESIS3SEL1 (0x4000) /* PPUS3 source select */ +#define ESIS3SEL0 (0x2000) /* PPUS3 source select */ +#define ESIS2SEL2 (0x1000) /* PPUS2 source select */ +#define ESIS2SEL1 (0x0800) /* PPUS2 source select */ +#define ESIS2SEL0 (0x0400) /* PPUS2 source select */ +#define ESIS1SEL2 (0x0200) /* PPUS1 source select */ +#define ESIS1SEL1 (0x0100) /* PPUS1 source select */ +#define ESIS1SEL0 (0x0080) /* PPUS1 source select */ +#define ESITCH11 (0x0040) /* select the comparator input for test channel 1 */ +#define ESITCH10 (0x0020) /* select the comparator input for test channel 1 */ +#define ESITCH01 (0x0010) /* select the comparator input for test channel 0 */ +#define ESITCH00 (0x0008) /* select the comparator input for test channel 0 */ +#define ESICS (0x0004) /* Comparator output/Timer_A input selection */ +#define ESITESTD (0x0002) /* Test cycle insertion */ +#define ESIEN (0x0001) /* Extended Scan interface enable */ + +/* ESICTL Control Bits */ +#define ESIS1SEL0_L (0x0080) /* PPUS1 source select */ +#define ESITCH11_L (0x0040) /* select the comparator input for test channel 1 */ +#define ESITCH10_L (0x0020) /* select the comparator input for test channel 1 */ +#define ESITCH01_L (0x0010) /* select the comparator input for test channel 0 */ +#define ESITCH00_L (0x0008) /* select the comparator input for test channel 0 */ +#define ESICS_L (0x0004) /* Comparator output/Timer_A input selection */ +#define ESITESTD_L (0x0002) /* Test cycle insertion */ +#define ESIEN_L (0x0001) /* Extended Scan interface enable */ + +/* ESICTL Control Bits */ +#define ESIS3SEL2_H (0x0080) /* PPUS3 source select */ +#define ESIS3SEL1_H (0x0040) /* PPUS3 source select */ +#define ESIS3SEL0_H (0x0020) /* PPUS3 source select */ +#define ESIS2SEL2_H (0x0010) /* PPUS2 source select */ +#define ESIS2SEL1_H (0x0008) /* PPUS2 source select */ +#define ESIS2SEL0_H (0x0004) /* PPUS2 source select */ +#define ESIS1SEL2_H (0x0002) /* PPUS1 source select */ +#define ESIS1SEL1_H (0x0001) /* PPUS1 source select */ + +#define ESIS3SEL_0 (0x0000) /* ESIOUT0 is the PPUS3 source */ +#define ESIS3SEL_1 (0x2000) /* ESIOUT1 is the PPUS3 source */ +#define ESIS3SEL_2 (0x4000) /* ESIOUT2 is the PPUS3 source */ +#define ESIS3SEL_3 (0x6000) /* ESIOUT3 is the PPUS3 source */ +#define ESIS3SEL_4 (0x8000) /* ESIOUT4 is the PPUS3 source */ +#define ESIS3SEL_5 (0xA000) /* ESIOUT5 is the PPUS3 source */ +#define ESIS3SEL_6 (0xC000) /* ESIOUT6 is the PPUS3 source */ +#define ESIS3SEL_7 (0xE000) /* ESIOUT7 is the PPUS3 source */ +#define ESIS2SEL_0 (0x0000) /* ESIOUT0 is the PPUS2 source */ +#define ESIS2SEL_1 (0x0400) /* ESIOUT1 is the PPUS2 source */ +#define ESIS2SEL_2 (0x0800) /* ESIOUT2 is the PPUS2 source */ +#define ESIS2SEL_3 (0x0C00) /* ESIOUT3 is the PPUS2 source */ +#define ESIS2SEL_4 (0x1000) /* ESIOUT4 is the PPUS2 source */ +#define ESIS2SEL_5 (0x1400) /* ESIOUT5 is the PPUS2 source */ +#define ESIS2SEL_6 (0x1800) /* ESIOUT6 is the PPUS2 source */ +#define ESIS2SEL_7 (0x1C00) /* ESIOUT7 is the PPUS2 source */ +#define ESIS1SEL_0 (0x0000) /* ESIOUT0 is the PPUS1 source */ +#define ESIS1SEL_1 (0x0080) /* ESIOUT1 is the PPUS1 source */ +#define ESIS1SEL_2 (0x0100) /* ESIOUT2 is the PPUS1 source */ +#define ESIS1SEL_3 (0x0180) /* ESIOUT3 is the PPUS1 source */ +#define ESIS1SEL_4 (0x0200) /* ESIOUT4 is the PPUS1 source */ +#define ESIS1SEL_5 (0x0280) /* ESIOUT5 is the PPUS1 source */ +#define ESIS1SEL_6 (0x0300) /* ESIOUT6 is the PPUS1 source */ +#define ESIS1SEL_7 (0x0380) /* ESIOUT7 is the PPUS1 source */ +#define ESITCH1_0 (0x0000) /* Comparator input is ESICH0 when ESICAX = 0; Comparator input is ESICI0 when ESICAX = 1 */ +#define ESITCH1_1 (0x0400) /* Comparator input is ESICH1 when ESICAX = 0; Comparator input is ESICI1 when ESICAX = 1 */ +#define ESITCH1_2 (0x0800) /* Comparator input is ESICH2 when ESICAX = 0; Comparator input is ESICI2 when ESICAX = 1 */ +#define ESITCH1_3 (0x0C00) /* Comparator input is ESICH3 when ESICAX = 0; Comparator input is ESICI3 when ESICAX = 1 */ +#define ESITCH0_0 (0x0000) /* Comparator input is ESICH0 when ESICAX = 0; Comparator input is ESICI0 when ESICAX = 1 */ +#define ESITCH0_1 (0x0008) /* Comparator input is ESICH1 when ESICAX = 0; Comparator input is ESICI1 when ESICAX = 1 */ +#define ESITCH0_2 (0x0010) /* Comparator input is ESICH2 when ESICAX = 0; Comparator input is ESICI2 when ESICAX = 1 */ +#define ESITCH0_3 (0x0018) /* Comparator input is ESICH3 when ESICAX = 0; Comparator input is ESICI3 when ESICAX = 1 */ + +/* Timing State Machine Control Bits */ +#define ESIREPEAT4 (0x8000) /* These bits together with the ESICLK bit configure the duration of this state */ +#define ESIREPEAT3 (0x4000) /* ESIREPEATx selects the number of clock cycles for this state. The number of clock cycles = ESIREPEATx + 1 */ +#define ESIREPEAT2 (0x2000) /* */ +#define ESIREPEAT1 (0x1000) /* */ +#define ESIREPEAT0 (0x0800) /* */ +#define ESICLK (0x0400) /* This bit selects the clock source for the TSM */ +#define ESISTOP (0x0200) /* This bit indicates the end of the TSM sequence */ +#define ESIDAC (0x0100) /* TSM DAC on */ +#define ESITESTS1 (0x0080) /* TSM test cycle control */ +#define ESIRSON (0x0040) /* Internal output latches enabled */ +#define ESICLKON (0x0020) /* High-frequency clock on */ +#define ESICA (0x0010) /* TSM comparator on */ +#define ESIEX (0x0008) /* Excitation and sample-and-hold */ +#define ESILCEN (0x0004) /* LC enable */ +#define ESICH1 (0x0002) /* Input channel select */ +#define ESICH0 (0x0001) /* Input channel select */ + +/* Timing State Machine Control Bits */ +#define ESITESTS1_L (0x0080) /* TSM test cycle control */ +#define ESIRSON_L (0x0040) /* Internal output latches enabled */ +#define ESICLKON_L (0x0020) /* High-frequency clock on */ +#define ESICA_L (0x0010) /* TSM comparator on */ +#define ESIEX_L (0x0008) /* Excitation and sample-and-hold */ +#define ESILCEN_L (0x0004) /* LC enable */ +#define ESICH1_L (0x0002) /* Input channel select */ +#define ESICH0_L (0x0001) /* Input channel select */ + +/* Timing State Machine Control Bits */ +#define ESIREPEAT4_H (0x0080) /* These bits together with the ESICLK bit configure the duration of this state */ +#define ESIREPEAT3_H (0x0040) /* ESIREPEATx selects the number of clock cycles for this state. The number of clock cycles = ESIREPEATx + 1 */ +#define ESIREPEAT2_H (0x0020) /* */ +#define ESIREPEAT1_H (0x0010) /* */ +#define ESIREPEAT0_H (0x0008) /* */ +#define ESICLK_H (0x0004) /* This bit selects the clock source for the TSM */ +#define ESISTOP_H (0x0002) /* This bit indicates the end of the TSM sequence */ +#define ESIDAC_H (0x0001) /* TSM DAC on */ + +#define ESICAAZ (0x0020) /* Comparator Offset calibration annulation */ + +#define ESIREPEAT_0 (0x0000) /* These bits configure the duration of this state */ +#define ESIREPEAT_1 (0x0800) /* ESIREPEATx selects the number of clock cycles for this state. The number of clock cycles = ESIREPEATx + 1 */ +#define ESIREPEAT_2 (0x1000) +#define ESIREPEAT_3 (0x1800) +#define ESIREPEAT_4 (0x2000) +#define ESIREPEAT_5 (0x2800) +#define ESIREPEAT_6 (0x3000) +#define ESIREPEAT_7 (0x3800) +#define ESIREPEAT_8 (0x4000) +#define ESIREPEAT_9 (0x4800) +#define ESIREPEAT_10 (0x5000) +#define ESIREPEAT_11 (0x5800) +#define ESIREPEAT_12 (0x6000) +#define ESIREPEAT_13 (0x6800) +#define ESIREPEAT_14 (0x7000) +#define ESIREPEAT_15 (0x7800) +#define ESIREPEAT_16 (0x8000) +#define ESIREPEAT_17 (0x8800) +#define ESIREPEAT_18 (0x9000) +#define ESIREPEAT_19 (0x9800) +#define ESIREPEAT_20 (0xA000) +#define ESIREPEAT_21 (0xA800) +#define ESIREPEAT_22 (0xB000) +#define ESIREPEAT_23 (0xB800) +#define ESIREPEAT_24 (0xC000) +#define ESIREPEAT_25 (0xC800) +#define ESIREPEAT_26 (0xD000) +#define ESIREPEAT_27 (0xD800) +#define ESIREPEAT_28 (0xE000) +#define ESIREPEAT_29 (0xE800) +#define ESIREPEAT_30 (0xF000) +#define ESIREPEAT_31 (0xF800) +#define ESICH_0 (0x0000) /* Input channel select: ESICH0 */ +#define ESICH_1 (0x0001) /* Input channel select: ESICH1 */ +#define ESICH_2 (0x0002) /* Input channel select: ESICH2 */ +#define ESICH_3 (0x0003) /* Input channel select: ESICH3 */ +/************************************************************ +* EXTENDED SCAN INTERFACE RAM +************************************************************/ +#define __MSP430_HAS_ESI_RAM__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_ESI_RAM__ 0x0E00 +#define ESI_RAM_BASE __MSP430_BASEADDRESS_ESI_RAM__ + +sfr_b(ESIRAM0); /* ESI RAM 0 */ +sfr_b(ESIRAM1); /* ESI RAM 1 */ +sfr_b(ESIRAM2); /* ESI RAM 2 */ +sfr_b(ESIRAM3); /* ESI RAM 3 */ +sfr_b(ESIRAM4); /* ESI RAM 4 */ +sfr_b(ESIRAM5); /* ESI RAM 5 */ +sfr_b(ESIRAM6); /* ESI RAM 6 */ +sfr_b(ESIRAM7); /* ESI RAM 7 */ +sfr_b(ESIRAM8); /* ESI RAM 8 */ +sfr_b(ESIRAM9); /* ESI RAM 9 */ +sfr_b(ESIRAM10); /* ESI RAM 10 */ +sfr_b(ESIRAM11); /* ESI RAM 11 */ +sfr_b(ESIRAM12); /* ESI RAM 12 */ +sfr_b(ESIRAM13); /* ESI RAM 13 */ +sfr_b(ESIRAM14); /* ESI RAM 14 */ +sfr_b(ESIRAM15); /* ESI RAM 15 */ +sfr_b(ESIRAM16); /* ESI RAM 16 */ +sfr_b(ESIRAM17); /* ESI RAM 17 */ +sfr_b(ESIRAM18); /* ESI RAM 18 */ +sfr_b(ESIRAM19); /* ESI RAM 19 */ +sfr_b(ESIRAM20); /* ESI RAM 20 */ +sfr_b(ESIRAM21); /* ESI RAM 21 */ +sfr_b(ESIRAM22); /* ESI RAM 22 */ +sfr_b(ESIRAM23); /* ESI RAM 23 */ +sfr_b(ESIRAM24); /* ESI RAM 24 */ +sfr_b(ESIRAM25); /* ESI RAM 25 */ +sfr_b(ESIRAM26); /* ESI RAM 26 */ +sfr_b(ESIRAM27); /* ESI RAM 27 */ +sfr_b(ESIRAM28); /* ESI RAM 28 */ +sfr_b(ESIRAM29); /* ESI RAM 29 */ +sfr_b(ESIRAM30); /* ESI RAM 30 */ +sfr_b(ESIRAM31); /* ESI RAM 31 */ +sfr_b(ESIRAM32); /* ESI RAM 32 */ +sfr_b(ESIRAM33); /* ESI RAM 33 */ +sfr_b(ESIRAM34); /* ESI RAM 34 */ +sfr_b(ESIRAM35); /* ESI RAM 35 */ +sfr_b(ESIRAM36); /* ESI RAM 36 */ +sfr_b(ESIRAM37); /* ESI RAM 37 */ +sfr_b(ESIRAM38); /* ESI RAM 38 */ +sfr_b(ESIRAM39); /* ESI RAM 39 */ +sfr_b(ESIRAM40); /* ESI RAM 40 */ +sfr_b(ESIRAM41); /* ESI RAM 41 */ +sfr_b(ESIRAM42); /* ESI RAM 42 */ +sfr_b(ESIRAM43); /* ESI RAM 43 */ +sfr_b(ESIRAM44); /* ESI RAM 44 */ +sfr_b(ESIRAM45); /* ESI RAM 45 */ +sfr_b(ESIRAM46); /* ESI RAM 46 */ +sfr_b(ESIRAM47); /* ESI RAM 47 */ +sfr_b(ESIRAM48); /* ESI RAM 48 */ +sfr_b(ESIRAM49); /* ESI RAM 49 */ +sfr_b(ESIRAM50); /* ESI RAM 50 */ +sfr_b(ESIRAM51); /* ESI RAM 51 */ +sfr_b(ESIRAM52); /* ESI RAM 52 */ +sfr_b(ESIRAM53); /* ESI RAM 53 */ +sfr_b(ESIRAM54); /* ESI RAM 54 */ +sfr_b(ESIRAM55); /* ESI RAM 55 */ +sfr_b(ESIRAM56); /* ESI RAM 56 */ +sfr_b(ESIRAM57); /* ESI RAM 57 */ +sfr_b(ESIRAM58); /* ESI RAM 58 */ +sfr_b(ESIRAM59); /* ESI RAM 59 */ +sfr_b(ESIRAM60); /* ESI RAM 60 */ +sfr_b(ESIRAM61); /* ESI RAM 61 */ +sfr_b(ESIRAM62); /* ESI RAM 62 */ +sfr_b(ESIRAM63); /* ESI RAM 63 */ +sfr_b(ESIRAM64); /* ESI RAM 64 */ +sfr_b(ESIRAM65); /* ESI RAM 65 */ +sfr_b(ESIRAM66); /* ESI RAM 66 */ +sfr_b(ESIRAM67); /* ESI RAM 67 */ +sfr_b(ESIRAM68); /* ESI RAM 68 */ +sfr_b(ESIRAM69); /* ESI RAM 69 */ +sfr_b(ESIRAM70); /* ESI RAM 70 */ +sfr_b(ESIRAM71); /* ESI RAM 71 */ +sfr_b(ESIRAM72); /* ESI RAM 72 */ +sfr_b(ESIRAM73); /* ESI RAM 73 */ +sfr_b(ESIRAM74); /* ESI RAM 74 */ +sfr_b(ESIRAM75); /* ESI RAM 75 */ +sfr_b(ESIRAM76); /* ESI RAM 76 */ +sfr_b(ESIRAM77); /* ESI RAM 77 */ +sfr_b(ESIRAM78); /* ESI RAM 78 */ +sfr_b(ESIRAM79); /* ESI RAM 79 */ +sfr_b(ESIRAM80); /* ESI RAM 80 */ +sfr_b(ESIRAM81); /* ESI RAM 81 */ +sfr_b(ESIRAM82); /* ESI RAM 82 */ +sfr_b(ESIRAM83); /* ESI RAM 83 */ +sfr_b(ESIRAM84); /* ESI RAM 84 */ +sfr_b(ESIRAM85); /* ESI RAM 85 */ +sfr_b(ESIRAM86); /* ESI RAM 86 */ +sfr_b(ESIRAM87); /* ESI RAM 87 */ +sfr_b(ESIRAM88); /* ESI RAM 88 */ +sfr_b(ESIRAM89); /* ESI RAM 89 */ +sfr_b(ESIRAM90); /* ESI RAM 90 */ +sfr_b(ESIRAM91); /* ESI RAM 91 */ +sfr_b(ESIRAM92); /* ESI RAM 92 */ +sfr_b(ESIRAM93); /* ESI RAM 93 */ +sfr_b(ESIRAM94); /* ESI RAM 94 */ +sfr_b(ESIRAM95); /* ESI RAM 95 */ +sfr_b(ESIRAM96); /* ESI RAM 96 */ +sfr_b(ESIRAM97); /* ESI RAM 97 */ +sfr_b(ESIRAM98); /* ESI RAM 98 */ +sfr_b(ESIRAM99); /* ESI RAM 99 */ +sfr_b(ESIRAM100); /* ESI RAM 100 */ +sfr_b(ESIRAM101); /* ESI RAM 101 */ +sfr_b(ESIRAM102); /* ESI RAM 102 */ +sfr_b(ESIRAM103); /* ESI RAM 103 */ +sfr_b(ESIRAM104); /* ESI RAM 104 */ +sfr_b(ESIRAM105); /* ESI RAM 105 */ +sfr_b(ESIRAM106); /* ESI RAM 106 */ +sfr_b(ESIRAM107); /* ESI RAM 107 */ +sfr_b(ESIRAM108); /* ESI RAM 108 */ +sfr_b(ESIRAM109); /* ESI RAM 109 */ +sfr_b(ESIRAM110); /* ESI RAM 110 */ +sfr_b(ESIRAM111); /* ESI RAM 111 */ +sfr_b(ESIRAM112); /* ESI RAM 112 */ +sfr_b(ESIRAM113); /* ESI RAM 113 */ +sfr_b(ESIRAM114); /* ESI RAM 114 */ +sfr_b(ESIRAM115); /* ESI RAM 115 */ +sfr_b(ESIRAM116); /* ESI RAM 116 */ +sfr_b(ESIRAM117); /* ESI RAM 117 */ +sfr_b(ESIRAM118); /* ESI RAM 118 */ +sfr_b(ESIRAM119); /* ESI RAM 119 */ +sfr_b(ESIRAM120); /* ESI RAM 120 */ +sfr_b(ESIRAM121); /* ESI RAM 121 */ +sfr_b(ESIRAM122); /* ESI RAM 122 */ +sfr_b(ESIRAM123); /* ESI RAM 123 */ +sfr_b(ESIRAM124); /* ESI RAM 124 */ +sfr_b(ESIRAM125); /* ESI RAM 125 */ +sfr_b(ESIRAM126); /* ESI RAM 126 */ +sfr_b(ESIRAM127); /* ESI RAM 127 */ +/************************************************************* +* FRAM Memory +*************************************************************/ +#define __MSP430_HAS_FRAM__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_FRAM__ 0x0140 +#define FRAM_BASE __MSP430_BASEADDRESS_FRAM__ +#define __MSP430_HAS_GC__ /* Definition to show that Module is available */ + +sfr_w(FRCTL0); /* FRAM Controller Control 0 */ +sfr_b(FRCTL0_L); /* FRAM Controller Control 0 */ +sfr_b(FRCTL0_H); /* FRAM Controller Control 0 */ +sfr_w(GCCTL0); /* General Control 0 */ +sfr_b(GCCTL0_L); /* General Control 0 */ +sfr_b(GCCTL0_H); /* General Control 0 */ +sfr_w(GCCTL1); /* General Control 1 */ +sfr_b(GCCTL1_L); /* General Control 1 */ +sfr_b(GCCTL1_H); /* General Control 1 */ + +#define FRCTLPW (0xA500) /* FRAM password for write */ +#define FRPW (0x9600) /* FRAM password returned by read */ +#define FWPW (0xA500) /* FRAM password for write */ +#define FXPW (0x3300) /* for use with XOR instruction */ + +/* FRCTL0 Control Bits */ +//#define RESERVED (0x0001) /* RESERVED */ +//#define RESERVED (0x0002) /* RESERVED */ +//#define RESERVED (0x0004) /* RESERVED */ +#define NWAITS0 (0x0010) /* FRAM Wait state control Bit: 0 */ +#define NWAITS1 (0x0020) /* FRAM Wait state control Bit: 1 */ +#define NWAITS2 (0x0040) /* FRAM Wait state control Bit: 2 */ +//#define RESERVED (0x0080) /* RESERVED */ + +/* FRCTL0 Control Bits */ +//#define RESERVED (0x0001) /* RESERVED */ +//#define RESERVED (0x0002) /* RESERVED */ +//#define RESERVED (0x0004) /* RESERVED */ +#define NWAITS0_L (0x0010) /* FRAM Wait state control Bit: 0 */ +#define NWAITS1_L (0x0020) /* FRAM Wait state control Bit: 1 */ +#define NWAITS2_L (0x0040) /* FRAM Wait state control Bit: 2 */ +//#define RESERVED (0x0080) /* RESERVED */ + +#define NWAITS_0 (0x0000) /* FRAM Wait state control: 0 */ +#define NWAITS_1 (0x0010) /* FRAM Wait state control: 1 */ +#define NWAITS_2 (0x0020) /* FRAM Wait state control: 2 */ +#define NWAITS_3 (0x0030) /* FRAM Wait state control: 3 */ +#define NWAITS_4 (0x0040) /* FRAM Wait state control: 4 */ +#define NWAITS_5 (0x0050) /* FRAM Wait state control: 5 */ +#define NWAITS_6 (0x0060) /* FRAM Wait state control: 6 */ +#define NWAITS_7 (0x0070) /* FRAM Wait state control: 7 */ + +/* GCCTL0 Control Bits */ +//#define RESERVED (0x0001) /* RESERVED */ +#define FRLPMPWR (0x0002) /* FRAM Enable FRAM auto power up after LPM */ +#define FRPWR (0x0004) /* FRAM Power Control */ +#define ACCTEIE (0x0008) /* RESERVED */ +//#define RESERVED (0x0010) /* RESERVED */ +#define CBDIE (0x0020) /* Enable NMI event if correctable bit error detected */ +#define UBDIE (0x0040) /* Enable NMI event if uncorrectable bit error detected */ +#define UBDRSTEN (0x0080) /* Enable Power Up Clear (PUC) reset if FRAM uncorrectable bit error detected */ + +/* GCCTL0 Control Bits */ +//#define RESERVED (0x0001) /* RESERVED */ +#define FRLPMPWR_L (0x0002) /* FRAM Enable FRAM auto power up after LPM */ +#define FRPWR_L (0x0004) /* FRAM Power Control */ +#define ACCTEIE_L (0x0008) /* RESERVED */ +//#define RESERVED (0x0010) /* RESERVED */ +#define CBDIE_L (0x0020) /* Enable NMI event if correctable bit error detected */ +#define UBDIE_L (0x0040) /* Enable NMI event if uncorrectable bit error detected */ +#define UBDRSTEN_L (0x0080) /* Enable Power Up Clear (PUC) reset if FRAM uncorrectable bit error detected */ + +/* GCCTL1 Control Bits */ +//#define RESERVED (0x0001) /* RESERVED */ +#define CBDIFG (0x0002) /* FRAM correctable bit error flag */ +#define UBDIFG (0x0004) /* FRAM uncorrectable bit error flag */ +#define ACCTEIFG (0x0008) /* Access time error flag */ + +/* GCCTL1 Control Bits */ +//#define RESERVED (0x0001) /* RESERVED */ +#define CBDIFG_L (0x0002) /* FRAM correctable bit error flag */ +#define UBDIFG_L (0x0004) /* FRAM uncorrectable bit error flag */ +#define ACCTEIFG_L (0x0008) /* Access time error flag */ + +/************************************************************ +* LCD_C +************************************************************/ +#define __MSP430_HAS_LCD_C__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_LCD_C__ 0x0A00 +#define LCD_C_BASE __MSP430_BASEADDRESS_LCD_C__ + +sfr_w(LCDCCTL0); /* LCD_C Control Register 0 */ +sfr_b(LCDCCTL0_L); /* LCD_C Control Register 0 */ +sfr_b(LCDCCTL0_H); /* LCD_C Control Register 0 */ +sfr_w(LCDCCTL1); /* LCD_C Control Register 1 */ +sfr_b(LCDCCTL1_L); /* LCD_C Control Register 1 */ +sfr_b(LCDCCTL1_H); /* LCD_C Control Register 1 */ +sfr_w(LCDCBLKCTL); /* LCD_C blinking control register */ +sfr_b(LCDCBLKCTL_L); /* LCD_C blinking control register */ +sfr_b(LCDCBLKCTL_H); /* LCD_C blinking control register */ +sfr_w(LCDCMEMCTL); /* LCD_C memory control register */ +sfr_b(LCDCMEMCTL_L); /* LCD_C memory control register */ +sfr_b(LCDCMEMCTL_H); /* LCD_C memory control register */ +sfr_w(LCDCVCTL); /* LCD_C Voltage Control Register */ +sfr_b(LCDCVCTL_L); /* LCD_C Voltage Control Register */ +sfr_b(LCDCVCTL_H); /* LCD_C Voltage Control Register */ +sfr_w(LCDCPCTL0); /* LCD_C Port Control Register 0 */ +sfr_b(LCDCPCTL0_L); /* LCD_C Port Control Register 0 */ +sfr_b(LCDCPCTL0_H); /* LCD_C Port Control Register 0 */ +sfr_w(LCDCPCTL1); /* LCD_C Port Control Register 1 */ +sfr_b(LCDCPCTL1_L); /* LCD_C Port Control Register 1 */ +sfr_b(LCDCPCTL1_H); /* LCD_C Port Control Register 1 */ +sfr_w(LCDCPCTL2); /* LCD_C Port Control Register 2 */ +sfr_b(LCDCPCTL2_L); /* LCD_C Port Control Register 2 */ +sfr_b(LCDCPCTL2_H); /* LCD_C Port Control Register 2 */ +sfr_w(LCDCCPCTL); /* LCD_C Charge Pump Control Register 3 */ +sfr_b(LCDCCPCTL_L); /* LCD_C Charge Pump Control Register 3 */ +sfr_b(LCDCCPCTL_H); /* LCD_C Charge Pump Control Register 3 */ +sfr_w(LCDCIV); /* LCD_C Interrupt Vector Register */ + +// LCDCCTL0 +#define LCDON (0x0001) /* LCD_C LCD On */ +#define LCDLP (0x0002) /* LCD_C Low Power Waveform */ +#define LCDSON (0x0004) /* LCD_C LCD Segments On */ +#define LCDMX0 (0x0008) /* LCD_C Mux Rate Bit: 0 */ +#define LCDMX1 (0x0010) /* LCD_C Mux Rate Bit: 1 */ +#define LCDMX2 (0x0020) /* LCD_C Mux Rate Bit: 2 */ +//#define RESERVED (0x0040) /* LCD_C RESERVED */ +#define LCDSSEL (0x0080) /* LCD_C Clock Select */ +#define LCDPRE0 (0x0100) /* LCD_C LCD frequency pre-scaler Bit: 0 */ +#define LCDPRE1 (0x0200) /* LCD_C LCD frequency pre-scaler Bit: 1 */ +#define LCDPRE2 (0x0400) /* LCD_C LCD frequency pre-scaler Bit: 2 */ +#define LCDDIV0 (0x0800) /* LCD_C LCD frequency divider Bit: 0 */ +#define LCDDIV1 (0x1000) /* LCD_C LCD frequency divider Bit: 1 */ +#define LCDDIV2 (0x2000) /* LCD_C LCD frequency divider Bit: 2 */ +#define LCDDIV3 (0x4000) /* LCD_C LCD frequency divider Bit: 3 */ +#define LCDDIV4 (0x8000) /* LCD_C LCD frequency divider Bit: 4 */ + +// LCDCCTL0 +#define LCDON_L (0x0001) /* LCD_C LCD On */ +#define LCDLP_L (0x0002) /* LCD_C Low Power Waveform */ +#define LCDSON_L (0x0004) /* LCD_C LCD Segments On */ +#define LCDMX0_L (0x0008) /* LCD_C Mux Rate Bit: 0 */ +#define LCDMX1_L (0x0010) /* LCD_C Mux Rate Bit: 1 */ +#define LCDMX2_L (0x0020) /* LCD_C Mux Rate Bit: 2 */ +//#define RESERVED (0x0040) /* LCD_C RESERVED */ +#define LCDSSEL_L (0x0080) /* LCD_C Clock Select */ + +// LCDCCTL0 +//#define RESERVED (0x0040) /* LCD_C RESERVED */ +#define LCDPRE0_H (0x0001) /* LCD_C LCD frequency pre-scaler Bit: 0 */ +#define LCDPRE1_H (0x0002) /* LCD_C LCD frequency pre-scaler Bit: 1 */ +#define LCDPRE2_H (0x0004) /* LCD_C LCD frequency pre-scaler Bit: 2 */ +#define LCDDIV0_H (0x0008) /* LCD_C LCD frequency divider Bit: 0 */ +#define LCDDIV1_H (0x0010) /* LCD_C LCD frequency divider Bit: 1 */ +#define LCDDIV2_H (0x0020) /* LCD_C LCD frequency divider Bit: 2 */ +#define LCDDIV3_H (0x0040) /* LCD_C LCD frequency divider Bit: 3 */ +#define LCDDIV4_H (0x0080) /* LCD_C LCD frequency divider Bit: 4 */ + +#define LCDPRE_0 (0x0000) /* LCD_C LCD frequency pre-scaler: /1 */ +#define LCDPRE_1 (0x0100) /* LCD_C LCD frequency pre-scaler: /2 */ +#define LCDPRE_2 (0x0200) /* LCD_C LCD frequency pre-scaler: /4 */ +#define LCDPRE_3 (0x0300) /* LCD_C LCD frequency pre-scaler: /8 */ +#define LCDPRE_4 (0x0400) /* LCD_C LCD frequency pre-scaler: /16 */ +#define LCDPRE_5 (0x0500) /* LCD_C LCD frequency pre-scaler: /32 */ +#define LCDPRE__1 (0x0000) /* LCD_C LCD frequency pre-scaler: /1 */ +#define LCDPRE__2 (0x0100) /* LCD_C LCD frequency pre-scaler: /2 */ +#define LCDPRE__4 (0x0200) /* LCD_C LCD frequency pre-scaler: /4 */ +#define LCDPRE__8 (0x0300) /* LCD_C LCD frequency pre-scaler: /8 */ +#define LCDPRE__16 (0x0400) /* LCD_C LCD frequency pre-scaler: /16 */ +#define LCDPRE__32 (0x0500) /* LCD_C LCD frequency pre-scaler: /32 */ + +#define LCDDIV_0 (0x0000) /* LCD_C LCD frequency divider: /1 */ +#define LCDDIV_1 (0x0800) /* LCD_C LCD frequency divider: /2 */ +#define LCDDIV_2 (0x1000) /* LCD_C LCD frequency divider: /3 */ +#define LCDDIV_3 (0x1800) /* LCD_C LCD frequency divider: /4 */ +#define LCDDIV_4 (0x2000) /* LCD_C LCD frequency divider: /5 */ +#define LCDDIV_5 (0x2800) /* LCD_C LCD frequency divider: /6 */ +#define LCDDIV_6 (0x3000) /* LCD_C LCD frequency divider: /7 */ +#define LCDDIV_7 (0x3800) /* LCD_C LCD frequency divider: /8 */ +#define LCDDIV_8 (0x4000) /* LCD_C LCD frequency divider: /9 */ +#define LCDDIV_9 (0x4800) /* LCD_C LCD frequency divider: /10 */ +#define LCDDIV_10 (0x5000) /* LCD_C LCD frequency divider: /11 */ +#define LCDDIV_11 (0x5800) /* LCD_C LCD frequency divider: /12 */ +#define LCDDIV_12 (0x6000) /* LCD_C LCD frequency divider: /13 */ +#define LCDDIV_13 (0x6800) /* LCD_C LCD frequency divider: /14 */ +#define LCDDIV_14 (0x7000) /* LCD_C LCD frequency divider: /15 */ +#define LCDDIV_15 (0x7800) /* LCD_C LCD frequency divider: /16 */ +#define LCDDIV_16 (0x8000) /* LCD_C LCD frequency divider: /17 */ +#define LCDDIV_17 (0x8800) /* LCD_C LCD frequency divider: /18 */ +#define LCDDIV_18 (0x9000) /* LCD_C LCD frequency divider: /19 */ +#define LCDDIV_19 (0x9800) /* LCD_C LCD frequency divider: /20 */ +#define LCDDIV_20 (0xA000) /* LCD_C LCD frequency divider: /21 */ +#define LCDDIV_21 (0xA800) /* LCD_C LCD frequency divider: /22 */ +#define LCDDIV_22 (0xB000) /* LCD_C LCD frequency divider: /23 */ +#define LCDDIV_23 (0xB800) /* LCD_C LCD frequency divider: /24 */ +#define LCDDIV_24 (0xC000) /* LCD_C LCD frequency divider: /25 */ +#define LCDDIV_25 (0xC800) /* LCD_C LCD frequency divider: /26 */ +#define LCDDIV_26 (0xD000) /* LCD_C LCD frequency divider: /27 */ +#define LCDDIV_27 (0xD800) /* LCD_C LCD frequency divider: /28 */ +#define LCDDIV_28 (0xE000) /* LCD_C LCD frequency divider: /29 */ +#define LCDDIV_29 (0xE800) /* LCD_C LCD frequency divider: /30 */ +#define LCDDIV_30 (0xF000) /* LCD_C LCD frequency divider: /31 */ +#define LCDDIV_31 (0xF800) /* LCD_C LCD frequency divider: /32 */ +#define LCDDIV__1 (0x0000) /* LCD_C LCD frequency divider: /1 */ +#define LCDDIV__2 (0x0800) /* LCD_C LCD frequency divider: /2 */ +#define LCDDIV__3 (0x1000) /* LCD_C LCD frequency divider: /3 */ +#define LCDDIV__4 (0x1800) /* LCD_C LCD frequency divider: /4 */ +#define LCDDIV__5 (0x2000) /* LCD_C LCD frequency divider: /5 */ +#define LCDDIV__6 (0x2800) /* LCD_C LCD frequency divider: /6 */ +#define LCDDIV__7 (0x3000) /* LCD_C LCD frequency divider: /7 */ +#define LCDDIV__8 (0x3800) /* LCD_C LCD frequency divider: /8 */ +#define LCDDIV__9 (0x4000) /* LCD_C LCD frequency divider: /9 */ +#define LCDDIV__10 (0x4800) /* LCD_C LCD frequency divider: /10 */ +#define LCDDIV__11 (0x5000) /* LCD_C LCD frequency divider: /11 */ +#define LCDDIV__12 (0x5800) /* LCD_C LCD frequency divider: /12 */ +#define LCDDIV__13 (0x6000) /* LCD_C LCD frequency divider: /13 */ +#define LCDDIV__14 (0x6800) /* LCD_C LCD frequency divider: /14 */ +#define LCDDIV__15 (0x7000) /* LCD_C LCD frequency divider: /15 */ +#define LCDDIV__16 (0x7800) /* LCD_C LCD frequency divider: /16 */ +#define LCDDIV__17 (0x8000) /* LCD_C LCD frequency divider: /17 */ +#define LCDDIV__18 (0x8800) /* LCD_C LCD frequency divider: /18 */ +#define LCDDIV__19 (0x9000) /* LCD_C LCD frequency divider: /19 */ +#define LCDDIV__20 (0x9800) /* LCD_C LCD frequency divider: /20 */ +#define LCDDIV__21 (0xA000) /* LCD_C LCD frequency divider: /21 */ +#define LCDDIV__22 (0xA800) /* LCD_C LCD frequency divider: /22 */ +#define LCDDIV__23 (0xB000) /* LCD_C LCD frequency divider: /23 */ +#define LCDDIV__24 (0xB800) /* LCD_C LCD frequency divider: /24 */ +#define LCDDIV__25 (0xC000) /* LCD_C LCD frequency divider: /25 */ +#define LCDDIV__26 (0xC800) /* LCD_C LCD frequency divider: /26 */ +#define LCDDIV__27 (0xD000) /* LCD_C LCD frequency divider: /27 */ +#define LCDDIV__28 (0xD800) /* LCD_C LCD frequency divider: /28 */ +#define LCDDIV__29 (0xE000) /* LCD_C LCD frequency divider: /29 */ +#define LCDDIV__30 (0xE800) /* LCD_C LCD frequency divider: /30 */ +#define LCDDIV__31 (0xF000) /* LCD_C LCD frequency divider: /31 */ +#define LCDDIV__32 (0xF800) /* LCD_C LCD frequency divider: /32 */ + +/* Display modes coded with Bits 2-4 */ +#define LCDSTATIC (LCDSON) +#define LCD2MUX (LCDMX0+LCDSON) +#define LCD3MUX (LCDMX1+LCDSON) +#define LCD4MUX (LCDMX1+LCDMX0+LCDSON) +#define LCD5MUX (LCDMX2+LCDSON) +#define LCD6MUX (LCDMX2+LCDMX0+LCDSON) +#define LCD7MUX (LCDMX2+LCDMX1+LCDSON) +#define LCD8MUX (LCDMX2+LCDMX1+LCDMX0+LCDSON) + +// LCDCCTL1 +#define LCDFRMIFG (0x0001) /* LCD_C LCD frame interrupt flag */ +#define LCDBLKOFFIFG (0x0002) /* LCD_C LCD blinking off interrupt flag, */ +#define LCDBLKONIFG (0x0004) /* LCD_C LCD blinking on interrupt flag, */ +#define LCDNOCAPIFG (0x0008) /* LCD_C No cpacitance connected interrupt flag */ +#define LCDFRMIE (0x0100) /* LCD_C LCD frame interrupt enable */ +#define LCDBLKOFFIE (0x0200) /* LCD_C LCD blinking off interrupt flag, */ +#define LCDBLKONIE (0x0400) /* LCD_C LCD blinking on interrupt flag, */ +#define LCDNOCAPIE (0x0800) /* LCD_C No cpacitance connected interrupt enable */ + +// LCDCCTL1 +#define LCDFRMIFG_L (0x0001) /* LCD_C LCD frame interrupt flag */ +#define LCDBLKOFFIFG_L (0x0002) /* LCD_C LCD blinking off interrupt flag, */ +#define LCDBLKONIFG_L (0x0004) /* LCD_C LCD blinking on interrupt flag, */ +#define LCDNOCAPIFG_L (0x0008) /* LCD_C No cpacitance connected interrupt flag */ + +// LCDCCTL1 +#define LCDFRMIE_H (0x0001) /* LCD_C LCD frame interrupt enable */ +#define LCDBLKOFFIE_H (0x0002) /* LCD_C LCD blinking off interrupt flag, */ +#define LCDBLKONIE_H (0x0004) /* LCD_C LCD blinking on interrupt flag, */ +#define LCDNOCAPIE_H (0x0008) /* LCD_C No cpacitance connected interrupt enable */ + +// LCDCBLKCTL +#define LCDBLKMOD0 (0x0001) /* LCD_C Blinking mode Bit: 0 */ +#define LCDBLKMOD1 (0x0002) /* LCD_C Blinking mode Bit: 1 */ +#define LCDBLKPRE0 (0x0004) /* LCD_C Clock pre-scaler for blinking frequency Bit: 0 */ +#define LCDBLKPRE1 (0x0008) /* LCD_C Clock pre-scaler for blinking frequency Bit: 1 */ +#define LCDBLKPRE2 (0x0010) /* LCD_C Clock pre-scaler for blinking frequency Bit: 2 */ +#define LCDBLKDIV0 (0x0020) /* LCD_C Clock divider for blinking frequency Bit: 0 */ +#define LCDBLKDIV1 (0x0040) /* LCD_C Clock divider for blinking frequency Bit: 1 */ +#define LCDBLKDIV2 (0x0080) /* LCD_C Clock divider for blinking frequency Bit: 2 */ + +// LCDCBLKCTL +#define LCDBLKMOD0_L (0x0001) /* LCD_C Blinking mode Bit: 0 */ +#define LCDBLKMOD1_L (0x0002) /* LCD_C Blinking mode Bit: 1 */ +#define LCDBLKPRE0_L (0x0004) /* LCD_C Clock pre-scaler for blinking frequency Bit: 0 */ +#define LCDBLKPRE1_L (0x0008) /* LCD_C Clock pre-scaler for blinking frequency Bit: 1 */ +#define LCDBLKPRE2_L (0x0010) /* LCD_C Clock pre-scaler for blinking frequency Bit: 2 */ +#define LCDBLKDIV0_L (0x0020) /* LCD_C Clock divider for blinking frequency Bit: 0 */ +#define LCDBLKDIV1_L (0x0040) /* LCD_C Clock divider for blinking frequency Bit: 1 */ +#define LCDBLKDIV2_L (0x0080) /* LCD_C Clock divider for blinking frequency Bit: 2 */ + +#define LCDBLKMOD_0 (0x0000) /* LCD_C Blinking mode: Off */ +#define LCDBLKMOD_1 (0x0001) /* LCD_C Blinking mode: Individual */ +#define LCDBLKMOD_2 (0x0002) /* LCD_C Blinking mode: All */ +#define LCDBLKMOD_3 (0x0003) /* LCD_C Blinking mode: Switching */ + +#define LCDBLKPRE_0 (0x0000) /* LCD_C Clock pre-scaler for blinking frequency: 0 */ +#define LCDBLKPRE_1 (0x0004) /* LCD_C Clock pre-scaler for blinking frequency: 1 */ +#define LCDBLKPRE_2 (0x0008) /* LCD_C Clock pre-scaler for blinking frequency: 2 */ +#define LCDBLKPRE_3 (0x000C) /* LCD_C Clock pre-scaler for blinking frequency: 3 */ +#define LCDBLKPRE_4 (0x0010) /* LCD_C Clock pre-scaler for blinking frequency: 4 */ +#define LCDBLKPRE_5 (0x0014) /* LCD_C Clock pre-scaler for blinking frequency: 5 */ +#define LCDBLKPRE_6 (0x0018) /* LCD_C Clock pre-scaler for blinking frequency: 6 */ +#define LCDBLKPRE_7 (0x001C) /* LCD_C Clock pre-scaler for blinking frequency: 7 */ + +#define LCDBLKPRE__512 (0x0000) /* LCD_C Clock pre-scaler for blinking frequency: 512 */ +#define LCDBLKPRE__1024 (0x0004) /* LCD_C Clock pre-scaler for blinking frequency: 1024 */ +#define LCDBLKPRE__2048 (0x0008) /* LCD_C Clock pre-scaler for blinking frequency: 2048 */ +#define LCDBLKPRE__4096 (0x000C) /* LCD_C Clock pre-scaler for blinking frequency: 4096 */ +#define LCDBLKPRE__8192 (0x0010) /* LCD_C Clock pre-scaler for blinking frequency: 8192 */ +#define LCDBLKPRE__16384 (0x0014) /* LCD_C Clock pre-scaler for blinking frequency: 16384 */ +#define LCDBLKPRE__32768 (0x0018) /* LCD_C Clock pre-scaler for blinking frequency: 32768 */ +#define LCDBLKPRE__65536 (0x001C) /* LCD_C Clock pre-scaler for blinking frequency: 65536 */ + +#define LCDBLKDIV_0 (0x0000) /* LCD_C Clock divider for blinking frequency: 0 */ +#define LCDBLKDIV_1 (0x0020) /* LCD_C Clock divider for blinking frequency: 1 */ +#define LCDBLKDIV_2 (0x0040) /* LCD_C Clock divider for blinking frequency: 2 */ +#define LCDBLKDIV_3 (0x0060) /* LCD_C Clock divider for blinking frequency: 3 */ +#define LCDBLKDIV_4 (0x0080) /* LCD_C Clock divider for blinking frequency: 4 */ +#define LCDBLKDIV_5 (0x00A0) /* LCD_C Clock divider for blinking frequency: 5 */ +#define LCDBLKDIV_6 (0x00C0) /* LCD_C Clock divider for blinking frequency: 6 */ +#define LCDBLKDIV_7 (0x00E0) /* LCD_C Clock divider for blinking frequency: 7 */ + +#define LCDBLKDIV__1 (0x0000) /* LCD_C Clock divider for blinking frequency: /1 */ +#define LCDBLKDIV__2 (0x0020) /* LCD_C Clock divider for blinking frequency: /2 */ +#define LCDBLKDIV__3 (0x0040) /* LCD_C Clock divider for blinking frequency: /3 */ +#define LCDBLKDIV__4 (0x0060) /* LCD_C Clock divider for blinking frequency: /4 */ +#define LCDBLKDIV__5 (0x0080) /* LCD_C Clock divider for blinking frequency: /5 */ +#define LCDBLKDIV__6 (0x00A0) /* LCD_C Clock divider for blinking frequency: /6 */ +#define LCDBLKDIV__7 (0x00C0) /* LCD_C Clock divider for blinking frequency: /7 */ +#define LCDBLKDIV__8 (0x00E0) /* LCD_C Clock divider for blinking frequency: /8 */ + +// LCDCMEMCTL +#define LCDDISP (0x0001) /* LCD_C LCD memory registers for display */ +#define LCDCLRM (0x0002) /* LCD_C Clear LCD memory */ +#define LCDCLRBM (0x0004) /* LCD_C Clear LCD blinking memory */ + +// LCDCMEMCTL +#define LCDDISP_L (0x0001) /* LCD_C LCD memory registers for display */ +#define LCDCLRM_L (0x0002) /* LCD_C Clear LCD memory */ +#define LCDCLRBM_L (0x0004) /* LCD_C Clear LCD blinking memory */ + +// LCDCVCTL +#define LCD2B (0x0001) /* Selects 1/2 bias. */ +#define VLCDREF0 (0x0002) /* Selects reference voltage for regulated charge pump: 0 */ +#define VLCDREF1 (0x0004) /* Selects reference voltage for regulated charge pump: 1 */ +#define LCDCPEN (0x0008) /* LCD Voltage Charge Pump Enable. */ +#define VLCDEXT (0x0010) /* Select external source for VLCD. */ +#define LCDEXTBIAS (0x0020) /* V2 - V4 voltage select. */ +#define R03EXT (0x0040) /* Selects external connections for LCD mid voltages. */ +#define LCDREXT (0x0080) /* Selects external connection for lowest LCD voltage. */ +#define VLCD0 (0x0200) /* VLCD select: 0 */ +#define VLCD1 (0x0400) /* VLCD select: 1 */ +#define VLCD2 (0x0800) /* VLCD select: 2 */ +#define VLCD3 (0x1000) /* VLCD select: 3 */ +#define VLCD4 (0x2000) /* VLCD select: 4 */ +#define VLCD5 (0x4000) /* VLCD select: 5 */ + +// LCDCVCTL +#define LCD2B_L (0x0001) /* Selects 1/2 bias. */ +#define VLCDREF0_L (0x0002) /* Selects reference voltage for regulated charge pump: 0 */ +#define VLCDREF1_L (0x0004) /* Selects reference voltage for regulated charge pump: 1 */ +#define LCDCPEN_L (0x0008) /* LCD Voltage Charge Pump Enable. */ +#define VLCDEXT_L (0x0010) /* Select external source for VLCD. */ +#define LCDEXTBIAS_L (0x0020) /* V2 - V4 voltage select. */ +#define R03EXT_L (0x0040) /* Selects external connections for LCD mid voltages. */ +#define LCDREXT_L (0x0080) /* Selects external connection for lowest LCD voltage. */ + +// LCDCVCTL +#define VLCD0_H (0x0002) /* VLCD select: 0 */ +#define VLCD1_H (0x0004) /* VLCD select: 1 */ +#define VLCD2_H (0x0008) /* VLCD select: 2 */ +#define VLCD3_H (0x0010) /* VLCD select: 3 */ +#define VLCD4_H (0x0020) /* VLCD select: 4 */ +#define VLCD5_H (0x0040) /* VLCD select: 5 */ + +/* Reference voltage source select for the regulated charge pump */ +#define VLCDREF_0 (0x0000) /* Internal */ +#define VLCDREF_1 (0x0002) /* External */ +#define VLCDREF_2 (0x0004) /* Reserved */ +#define VLCDREF_3 (0x0006) /* Reserved */ + +/* Charge pump voltage selections */ +#define VLCD_0 (0x0000) /* Charge pump disabled */ +#define VLCD_1 (0x0200) /* VLCD = 2.60V */ +#define VLCD_2 (0x0400) /* VLCD = 2.66V */ +#define VLCD_3 (0x0600) /* VLCD = 2.72V */ +#define VLCD_4 (0x0800) /* VLCD = 2.78V */ +#define VLCD_5 (0x0A00) /* VLCD = 2.84V */ +#define VLCD_6 (0x0C00) /* VLCD = 2.90V */ +#define VLCD_7 (0x0E00) /* VLCD = 2.96V */ +#define VLCD_8 (0x1000) /* VLCD = 3.02V */ +#define VLCD_9 (0x1200) /* VLCD = 3.08V */ +#define VLCD_10 (0x1400) /* VLCD = 3.14V */ +#define VLCD_11 (0x1600) /* VLCD = 3.20V */ +#define VLCD_12 (0x1800) /* VLCD = 3.26V */ +#define VLCD_13 (0x1A00) /* VLCD = 3.32V */ +#define VLCD_14 (0x1C00) /* VLCD = 3.38V */ +#define VLCD_15 (0x1E00) /* VLCD = 3.44V */ + +#define VLCD_DISABLED (0x0000) /* Charge pump disabled */ +#define VLCD_2_60 (0x0200) /* VLCD = 2.60V */ +#define VLCD_2_66 (0x0400) /* VLCD = 2.66V */ +#define VLCD_2_72 (0x0600) /* VLCD = 2.72V */ +#define VLCD_2_78 (0x0800) /* VLCD = 2.78V */ +#define VLCD_2_84 (0x0A00) /* VLCD = 2.84V */ +#define VLCD_2_90 (0x0C00) /* VLCD = 2.90V */ +#define VLCD_2_96 (0x0E00) /* VLCD = 2.96V */ +#define VLCD_3_02 (0x1000) /* VLCD = 3.02V */ +#define VLCD_3_08 (0x1200) /* VLCD = 3.08V */ +#define VLCD_3_14 (0x1400) /* VLCD = 3.14V */ +#define VLCD_3_20 (0x1600) /* VLCD = 3.20V */ +#define VLCD_3_26 (0x1800) /* VLCD = 3.26V */ +#define VLCD_3_32 (0x1A00) /* VLCD = 3.32V */ +#define VLCD_3_38 (0x1C00) /* VLCD = 3.38V */ +#define VLCD_3_44 (0x1E00) /* VLCD = 3.44V */ + +// LCDCPCTL0 +#define LCDS0 (0x0001) /* LCD Segment 0 enable. */ +#define LCDS1 (0x0002) /* LCD Segment 1 enable. */ +#define LCDS2 (0x0004) /* LCD Segment 2 enable. */ +#define LCDS3 (0x0008) /* LCD Segment 3 enable. */ +#define LCDS4 (0x0010) /* LCD Segment 4 enable. */ +#define LCDS5 (0x0020) /* LCD Segment 5 enable. */ +#define LCDS6 (0x0040) /* LCD Segment 6 enable. */ +#define LCDS7 (0x0080) /* LCD Segment 7 enable. */ +#define LCDS8 (0x0100) /* LCD Segment 8 enable. */ +#define LCDS9 (0x0200) /* LCD Segment 9 enable. */ +#define LCDS10 (0x0400) /* LCD Segment 10 enable. */ +#define LCDS11 (0x0800) /* LCD Segment 11 enable. */ +#define LCDS12 (0x1000) /* LCD Segment 12 enable. */ +#define LCDS13 (0x2000) /* LCD Segment 13 enable. */ +#define LCDS14 (0x4000) /* LCD Segment 14 enable. */ +#define LCDS15 (0x8000) /* LCD Segment 15 enable. */ + +// LCDCPCTL0 +#define LCDS0_L (0x0001) /* LCD Segment 0 enable. */ +#define LCDS1_L (0x0002) /* LCD Segment 1 enable. */ +#define LCDS2_L (0x0004) /* LCD Segment 2 enable. */ +#define LCDS3_L (0x0008) /* LCD Segment 3 enable. */ +#define LCDS4_L (0x0010) /* LCD Segment 4 enable. */ +#define LCDS5_L (0x0020) /* LCD Segment 5 enable. */ +#define LCDS6_L (0x0040) /* LCD Segment 6 enable. */ +#define LCDS7_L (0x0080) /* LCD Segment 7 enable. */ + +// LCDCPCTL0 +#define LCDS8_H (0x0001) /* LCD Segment 8 enable. */ +#define LCDS9_H (0x0002) /* LCD Segment 9 enable. */ +#define LCDS10_H (0x0004) /* LCD Segment 10 enable. */ +#define LCDS11_H (0x0008) /* LCD Segment 11 enable. */ +#define LCDS12_H (0x0010) /* LCD Segment 12 enable. */ +#define LCDS13_H (0x0020) /* LCD Segment 13 enable. */ +#define LCDS14_H (0x0040) /* LCD Segment 14 enable. */ +#define LCDS15_H (0x0080) /* LCD Segment 15 enable. */ + +// LCDCPCTL1 +#define LCDS16 (0x0001) /* LCD Segment 16 enable. */ +#define LCDS17 (0x0002) /* LCD Segment 17 enable. */ +#define LCDS18 (0x0004) /* LCD Segment 18 enable. */ +#define LCDS19 (0x0008) /* LCD Segment 19 enable. */ +#define LCDS20 (0x0010) /* LCD Segment 20 enable. */ +#define LCDS21 (0x0020) /* LCD Segment 21 enable. */ +#define LCDS22 (0x0040) /* LCD Segment 22 enable. */ +#define LCDS23 (0x0080) /* LCD Segment 23 enable. */ +#define LCDS24 (0x0100) /* LCD Segment 24 enable. */ +#define LCDS25 (0x0200) /* LCD Segment 25 enable. */ +#define LCDS26 (0x0400) /* LCD Segment 26 enable. */ +#define LCDS27 (0x0800) /* LCD Segment 27 enable. */ +#define LCDS28 (0x1000) /* LCD Segment 28 enable. */ +#define LCDS29 (0x2000) /* LCD Segment 29 enable. */ +#define LCDS30 (0x4000) /* LCD Segment 30 enable. */ +#define LCDS31 (0x8000) /* LCD Segment 31 enable. */ + +// LCDCPCTL1 +#define LCDS16_L (0x0001) /* LCD Segment 16 enable. */ +#define LCDS17_L (0x0002) /* LCD Segment 17 enable. */ +#define LCDS18_L (0x0004) /* LCD Segment 18 enable. */ +#define LCDS19_L (0x0008) /* LCD Segment 19 enable. */ +#define LCDS20_L (0x0010) /* LCD Segment 20 enable. */ +#define LCDS21_L (0x0020) /* LCD Segment 21 enable. */ +#define LCDS22_L (0x0040) /* LCD Segment 22 enable. */ +#define LCDS23_L (0x0080) /* LCD Segment 23 enable. */ + +// LCDCPCTL1 +#define LCDS24_H (0x0001) /* LCD Segment 24 enable. */ +#define LCDS25_H (0x0002) /* LCD Segment 25 enable. */ +#define LCDS26_H (0x0004) /* LCD Segment 26 enable. */ +#define LCDS27_H (0x0008) /* LCD Segment 27 enable. */ +#define LCDS28_H (0x0010) /* LCD Segment 28 enable. */ +#define LCDS29_H (0x0020) /* LCD Segment 29 enable. */ +#define LCDS30_H (0x0040) /* LCD Segment 30 enable. */ +#define LCDS31_H (0x0080) /* LCD Segment 31 enable. */ + +// LCDCPCTL2 +#define LCDS32 (0x0001) /* LCD Segment 32 enable. */ +#define LCDS33 (0x0002) /* LCD Segment 33 enable. */ +#define LCDS34 (0x0004) /* LCD Segment 34 enable. */ +#define LCDS35 (0x0008) /* LCD Segment 35 enable. */ +#define LCDS36 (0x0010) /* LCD Segment 36 enable. */ +#define LCDS37 (0x0020) /* LCD Segment 37 enable. */ +#define LCDS38 (0x0040) /* LCD Segment 38 enable. */ +#define LCDS39 (0x0080) /* LCD Segment 39 enable. */ +#define LCDS40 (0x0100) /* LCD Segment 40 enable. */ +#define LCDS41 (0x0200) /* LCD Segment 41 enable. */ +#define LCDS42 (0x0400) /* LCD Segment 42 enable. */ +#define LCDS43 (0x0800) /* LCD Segment 43 enable. */ +#define LCDS44 (0x1000) /* LCD Segment 44 enable. */ +#define LCDS45 (0x2000) /* LCD Segment 45 enable. */ +#define LCDS46 (0x4000) /* LCD Segment 46 enable. */ +#define LCDS47 (0x8000) /* LCD Segment 47 enable. */ + +// LCDCPCTL2 +#define LCDS32_L (0x0001) /* LCD Segment 32 enable. */ +#define LCDS33_L (0x0002) /* LCD Segment 33 enable. */ +#define LCDS34_L (0x0004) /* LCD Segment 34 enable. */ +#define LCDS35_L (0x0008) /* LCD Segment 35 enable. */ +#define LCDS36_L (0x0010) /* LCD Segment 36 enable. */ +#define LCDS37_L (0x0020) /* LCD Segment 37 enable. */ +#define LCDS38_L (0x0040) /* LCD Segment 38 enable. */ +#define LCDS39_L (0x0080) /* LCD Segment 39 enable. */ + +// LCDCPCTL2 +#define LCDS40_H (0x0001) /* LCD Segment 40 enable. */ +#define LCDS41_H (0x0002) /* LCD Segment 41 enable. */ +#define LCDS42_H (0x0004) /* LCD Segment 42 enable. */ +#define LCDS43_H (0x0008) /* LCD Segment 43 enable. */ +#define LCDS44_H (0x0010) /* LCD Segment 44 enable. */ +#define LCDS45_H (0x0020) /* LCD Segment 45 enable. */ +#define LCDS46_H (0x0040) /* LCD Segment 46 enable. */ +#define LCDS47_H (0x0080) /* LCD Segment 47 enable. */ + +// LCDCCPCTL +#define LCDCPDIS0 (0x0001) /* LCD charge pump disable */ +#define LCDCPDIS1 (0x0002) /* LCD charge pump disable */ +#define LCDCPDIS2 (0x0004) /* LCD charge pump disable */ +#define LCDCPDIS3 (0x0008) /* LCD charge pump disable */ +#define LCDCPDIS4 (0x0010) /* LCD charge pump disable */ +#define LCDCPDIS5 (0x0020) /* LCD charge pump disable */ +#define LCDCPDIS6 (0x0040) /* LCD charge pump disable */ +#define LCDCPDIS7 (0x0080) /* LCD charge pump disable */ +#define LCDCPCLKSYNC (0x8000) /* LCD charge pump clock synchronization */ + +// LCDCCPCTL +#define LCDCPDIS0_L (0x0001) /* LCD charge pump disable */ +#define LCDCPDIS1_L (0x0002) /* LCD charge pump disable */ +#define LCDCPDIS2_L (0x0004) /* LCD charge pump disable */ +#define LCDCPDIS3_L (0x0008) /* LCD charge pump disable */ +#define LCDCPDIS4_L (0x0010) /* LCD charge pump disable */ +#define LCDCPDIS5_L (0x0020) /* LCD charge pump disable */ +#define LCDCPDIS6_L (0x0040) /* LCD charge pump disable */ +#define LCDCPDIS7_L (0x0080) /* LCD charge pump disable */ + +// LCDCCPCTL +#define LCDCPCLKSYNC_H (0x0080) /* LCD charge pump clock synchronization */ + +sfr_b(LCDM1); /* LCD Memory 1 */ +#define LCDMEM_ LCDM1 /* LCD Memory */ +#ifndef __STDC__ +#define LCDMEM LCDM1 /* LCD Memory (for assembler) */ +#else +#define LCDMEM ((volatile char*) &LCDM1) /* LCD Memory (for C) */ +#endif +sfr_b(LCDM2); /* LCD Memory 2 */ +sfr_b(LCDM3); /* LCD Memory 3 */ +sfr_b(LCDM4); /* LCD Memory 4 */ +sfr_b(LCDM5); /* LCD Memory 5 */ +sfr_b(LCDM6); /* LCD Memory 6 */ +sfr_b(LCDM7); /* LCD Memory 7 */ +sfr_b(LCDM8); /* LCD Memory 8 */ +sfr_b(LCDM9); /* LCD Memory 9 */ +sfr_b(LCDM10); /* LCD Memory 10 */ +sfr_b(LCDM11); /* LCD Memory 11 */ +sfr_b(LCDM12); /* LCD Memory 12 */ +sfr_b(LCDM13); /* LCD Memory 13 */ +sfr_b(LCDM14); /* LCD Memory 14 */ +sfr_b(LCDM15); /* LCD Memory 15 */ +sfr_b(LCDM16); /* LCD Memory 16 */ +sfr_b(LCDM17); /* LCD Memory 17 */ +sfr_b(LCDM18); /* LCD Memory 18 */ +sfr_b(LCDM19); /* LCD Memory 19 */ +sfr_b(LCDM20); /* LCD Memory 20 */ +sfr_b(LCDM21); /* LCD Memory 21 */ +sfr_b(LCDM22); /* LCD Memory 22 */ +sfr_b(LCDM23); /* LCD Memory 23 */ +sfr_b(LCDM24); /* LCD Memory 24 */ +sfr_b(LCDM25); /* LCD Memory 25 */ +sfr_b(LCDM26); /* LCD Memory 26 */ +sfr_b(LCDM27); /* LCD Memory 27 */ +sfr_b(LCDM28); /* LCD Memory 28 */ +sfr_b(LCDM29); /* LCD Memory 29 */ +sfr_b(LCDM30); /* LCD Memory 30 */ +sfr_b(LCDM31); /* LCD Memory 31 */ +sfr_b(LCDM32); /* LCD Memory 32 */ +sfr_b(LCDM33); /* LCD Memory 33 */ +sfr_b(LCDM34); /* LCD Memory 34 */ +sfr_b(LCDM35); /* LCD Memory 35 */ +sfr_b(LCDM36); /* LCD Memory 36 */ +sfr_b(LCDM37); /* LCD Memory 37 */ +sfr_b(LCDM38); /* LCD Memory 38 */ +sfr_b(LCDM39); /* LCD Memory 39 */ +sfr_b(LCDM40); /* LCD Memory 40 */ +sfr_b(LCDM41); /* LCD Memory 41 */ +sfr_b(LCDM42); /* LCD Memory 42 */ +sfr_b(LCDM43); /* LCD Memory 43 */ + +sfr_b(LCDBM1); /* LCD Blinking Memory 1 */ +#define LCDBMEM_ LCDBM1 /* LCD Blinking Memory */ +#ifndef __STDC__ +#define LCDBMEM (LCDBM1) /* LCD Blinking Memory (for assembler) */ +#else +#define LCDBMEM ((volatile char*) &LCDBM1) /* LCD Blinking Memory (for C) */ +#endif +sfr_b(LCDBM2); /* LCD Blinking Memory 2 */ +sfr_b(LCDBM3); /* LCD Blinking Memory 3 */ +sfr_b(LCDBM4); /* LCD Blinking Memory 4 */ +sfr_b(LCDBM5); /* LCD Blinking Memory 5 */ +sfr_b(LCDBM6); /* LCD Blinking Memory 6 */ +sfr_b(LCDBM7); /* LCD Blinking Memory 7 */ +sfr_b(LCDBM8); /* LCD Blinking Memory 8 */ +sfr_b(LCDBM9); /* LCD Blinking Memory 9 */ +sfr_b(LCDBM10); /* LCD Blinking Memory 10 */ +sfr_b(LCDBM11); /* LCD Blinking Memory 11 */ +sfr_b(LCDBM12); /* LCD Blinking Memory 12 */ +sfr_b(LCDBM13); /* LCD Blinking Memory 13 */ +sfr_b(LCDBM14); /* LCD Blinking Memory 14 */ +sfr_b(LCDBM15); /* LCD Blinking Memory 15 */ +sfr_b(LCDBM16); /* LCD Blinking Memory 16 */ +sfr_b(LCDBM17); /* LCD Blinking Memory 17 */ +sfr_b(LCDBM18); /* LCD Blinking Memory 18 */ +sfr_b(LCDBM19); /* LCD Blinking Memory 19 */ +sfr_b(LCDBM20); /* LCD Blinking Memory 20 */ +sfr_b(LCDBM21); /* LCD Blinking Memory 21 */ +sfr_b(LCDBM22); /* LCD Blinking Memory 22 */ + +/* LCDCIV Definitions */ +#define LCDCIV_NONE (0x0000) /* No Interrupt pending */ +#define LCDCIV_LCDNOCAPIFG (0x0002) /* No capacitor connected */ +#define LCDCIV_LCDCLKOFFIFG (0x0004) /* Blink, segments off */ +#define LCDCIV_LCDCLKONIFG (0x0006) /* Blink, segments on */ +#define LCDCIV_LCDFRMIFG (0x0008) /* Frame interrupt */ + +/************************************************************ +* Memory Protection Unit +************************************************************/ +#define __MSP430_HAS_MPU__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_MPU__ 0x05A0 +#define MPU_BASE __MSP430_BASEADDRESS_MPU__ + +sfr_w(MPUCTL0); /* MPU Control Register 0 */ +sfr_b(MPUCTL0_L); /* MPU Control Register 0 */ +sfr_b(MPUCTL0_H); /* MPU Control Register 0 */ +sfr_w(MPUCTL1); /* MPU Control Register 1 */ +sfr_b(MPUCTL1_L); /* MPU Control Register 1 */ +sfr_b(MPUCTL1_H); /* MPU Control Register 1 */ +sfr_w(MPUSEGB2); /* MPU Segmentation Border 2 Register */ +sfr_b(MPUSEGB2_L); /* MPU Segmentation Border 2 Register */ +sfr_b(MPUSEGB2_H); /* MPU Segmentation Border 2 Register */ +sfr_w(MPUSEGB1); /* MPU Segmentation Border 1 Register */ +sfr_b(MPUSEGB1_L); /* MPU Segmentation Border 1 Register */ +sfr_b(MPUSEGB1_H); /* MPU Segmentation Border 1 Register */ +sfr_w(MPUSAM); /* MPU Access Management Register */ +sfr_b(MPUSAM_L); /* MPU Access Management Register */ +sfr_b(MPUSAM_H); /* MPU Access Management Register */ +sfr_w(MPUIPC0); /* MPU IP Control 0 Register */ +sfr_b(MPUIPC0_L); /* MPU IP Control 0 Register */ +sfr_b(MPUIPC0_H); /* MPU IP Control 0 Register */ +sfr_w(MPUIPSEGB2); /* MPU IP Segment Border 2 Register */ +sfr_b(MPUIPSEGB2_L); /* MPU IP Segment Border 2 Register */ +sfr_b(MPUIPSEGB2_H); /* MPU IP Segment Border 2 Register */ +sfr_w(MPUIPSEGB1); /* MPU IP Segment Border 1 Register */ +sfr_b(MPUIPSEGB1_L); /* MPU IP Segment Border 1 Register */ +sfr_b(MPUIPSEGB1_H); /* MPU IP Segment Border 1 Register */ + +/* MPUCTL0 Control Bits */ +#define MPUENA (0x0001) /* MPU Enable */ +#define MPULOCK (0x0002) /* MPU Lock */ +#define MPUSEGIE (0x0010) /* MPU Enable NMI on Segment violation */ + +/* MPUCTL0 Control Bits */ +#define MPUENA_L (0x0001) /* MPU Enable */ +#define MPULOCK_L (0x0002) /* MPU Lock */ +#define MPUSEGIE_L (0x0010) /* MPU Enable NMI on Segment violation */ + +#define MPUPW (0xA500) /* MPU Access Password */ +#define MPUPW_H (0xA5) /* MPU Access Password */ + +/* MPUCTL1 Control Bits */ +#define MPUSEG1IFG (0x0001) /* MPU Main Memory Segment 1 violation interupt flag */ +#define MPUSEG2IFG (0x0002) /* MPU Main Memory Segment 2 violation interupt flag */ +#define MPUSEG3IFG (0x0004) /* MPU Main Memory Segment 3 violation interupt flag */ +#define MPUSEGIIFG (0x0008) /* MPU Info Memory Segment violation interupt flag */ +#define MPUSEGIPIFG (0x0010) /* MPU IP Memory Segment violation interupt flag */ + +/* MPUCTL1 Control Bits */ +#define MPUSEG1IFG_L (0x0001) /* MPU Main Memory Segment 1 violation interupt flag */ +#define MPUSEG2IFG_L (0x0002) /* MPU Main Memory Segment 2 violation interupt flag */ +#define MPUSEG3IFG_L (0x0004) /* MPU Main Memory Segment 3 violation interupt flag */ +#define MPUSEGIIFG_L (0x0008) /* MPU Info Memory Segment violation interupt flag */ +#define MPUSEGIPIFG_L (0x0010) /* MPU IP Memory Segment violation interupt flag */ + +/* MPUSEGB2 Control Bits */ + +/* MPUSEGB2 Control Bits */ + +/* MPUSEGB2 Control Bits */ + +/* MPUSEGB1 Control Bits */ + +/* MPUSEGB1 Control Bits */ + +/* MPUSEGB1 Control Bits */ + +/* MPUSAM Control Bits */ +#define MPUSEG1RE (0x0001) /* MPU Main memory Segment 1 Read enable */ +#define MPUSEG1WE (0x0002) /* MPU Main memory Segment 1 Write enable */ +#define MPUSEG1XE (0x0004) /* MPU Main memory Segment 1 Execute enable */ +#define MPUSEG1VS (0x0008) /* MPU Main memory Segment 1 Violation select */ +#define MPUSEG2RE (0x0010) /* MPU Main memory Segment 2 Read enable */ +#define MPUSEG2WE (0x0020) /* MPU Main memory Segment 2 Write enable */ +#define MPUSEG2XE (0x0040) /* MPU Main memory Segment 2 Execute enable */ +#define MPUSEG2VS (0x0080) /* MPU Main memory Segment 2 Violation select */ +#define MPUSEG3RE (0x0100) /* MPU Main memory Segment 3 Read enable */ +#define MPUSEG3WE (0x0200) /* MPU Main memory Segment 3 Write enable */ +#define MPUSEG3XE (0x0400) /* MPU Main memory Segment 3 Execute enable */ +#define MPUSEG3VS (0x0800) /* MPU Main memory Segment 3 Violation select */ +#define MPUSEGIRE (0x1000) /* MPU Info memory Segment Read enable */ +#define MPUSEGIWE (0x2000) /* MPU Info memory Segment Write enable */ +#define MPUSEGIXE (0x4000) /* MPU Info memory Segment Execute enable */ +#define MPUSEGIVS (0x8000) /* MPU Info memory Segment Violation select */ + +/* MPUSAM Control Bits */ +#define MPUSEG1RE_L (0x0001) /* MPU Main memory Segment 1 Read enable */ +#define MPUSEG1WE_L (0x0002) /* MPU Main memory Segment 1 Write enable */ +#define MPUSEG1XE_L (0x0004) /* MPU Main memory Segment 1 Execute enable */ +#define MPUSEG1VS_L (0x0008) /* MPU Main memory Segment 1 Violation select */ +#define MPUSEG2RE_L (0x0010) /* MPU Main memory Segment 2 Read enable */ +#define MPUSEG2WE_L (0x0020) /* MPU Main memory Segment 2 Write enable */ +#define MPUSEG2XE_L (0x0040) /* MPU Main memory Segment 2 Execute enable */ +#define MPUSEG2VS_L (0x0080) /* MPU Main memory Segment 2 Violation select */ + +/* MPUSAM Control Bits */ +#define MPUSEG3RE_H (0x0001) /* MPU Main memory Segment 3 Read enable */ +#define MPUSEG3WE_H (0x0002) /* MPU Main memory Segment 3 Write enable */ +#define MPUSEG3XE_H (0x0004) /* MPU Main memory Segment 3 Execute enable */ +#define MPUSEG3VS_H (0x0008) /* MPU Main memory Segment 3 Violation select */ +#define MPUSEGIRE_H (0x0010) /* MPU Info memory Segment Read enable */ +#define MPUSEGIWE_H (0x0020) /* MPU Info memory Segment Write enable */ +#define MPUSEGIXE_H (0x0040) /* MPU Info memory Segment Execute enable */ +#define MPUSEGIVS_H (0x0080) /* MPU Info memory Segment Violation select */ + +/* MPUIPC0 Control Bits */ +#define MPUIPVS (0x0020) /* MPU MPU IP protection segment Violation Select */ +#define MPUIPENA (0x0040) /* MPU MPU IP Protection Enable */ +#define MPUIPLOCK (0x0080) /* MPU IP Protection Lock */ + +/* MPUIPC0 Control Bits */ +#define MPUIPVS_L (0x0020) /* MPU MPU IP protection segment Violation Select */ +#define MPUIPENA_L (0x0040) /* MPU MPU IP Protection Enable */ +#define MPUIPLOCK_L (0x0080) /* MPU IP Protection Lock */ + +/* MPUIPSEGB2 Control Bits */ + +/* MPUIPSEGB2 Control Bits */ + +/* MPUIPSEGB2 Control Bits */ + +/* MPUIPSEGB1 Control Bits */ + +/* MPUIPSEGB1 Control Bits */ + +/* MPUIPSEGB1 Control Bits */ + +/************************************************************ +* HARDWARE MULTIPLIER 32Bit +************************************************************/ +#define __MSP430_HAS_MPY32__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_MPY32__ 0x04C0 +#define MPY32_BASE __MSP430_BASEADDRESS_MPY32__ + +sfr_w(MPY); /* Multiply Unsigned/Operand 1 */ +sfr_b(MPY_L); /* Multiply Unsigned/Operand 1 */ +sfr_b(MPY_H); /* Multiply Unsigned/Operand 1 */ +sfr_w(MPYS); /* Multiply Signed/Operand 1 */ +sfr_b(MPYS_L); /* Multiply Signed/Operand 1 */ +sfr_b(MPYS_H); /* Multiply Signed/Operand 1 */ +sfr_w(MAC); /* Multiply Unsigned and Accumulate/Operand 1 */ +sfr_b(MAC_L); /* Multiply Unsigned and Accumulate/Operand 1 */ +sfr_b(MAC_H); /* Multiply Unsigned and Accumulate/Operand 1 */ +sfr_w(MACS); /* Multiply Signed and Accumulate/Operand 1 */ +sfr_b(MACS_L); /* Multiply Signed and Accumulate/Operand 1 */ +sfr_b(MACS_H); /* Multiply Signed and Accumulate/Operand 1 */ +sfr_w(OP2); /* Operand 2 */ +sfr_b(OP2_L); /* Operand 2 */ +sfr_b(OP2_H); /* Operand 2 */ +sfr_w(RESLO); /* Result Low Word */ +sfr_b(RESLO_L); /* Result Low Word */ +sfr_b(RESLO_H); /* Result Low Word */ +sfr_w(RESHI); /* Result High Word */ +sfr_b(RESHI_L); /* Result High Word */ +sfr_b(RESHI_H); /* Result High Word */ +sfr_w(SUMEXT); /* Sum Extend */ +sfr_b(SUMEXT_L); /* Sum Extend */ +sfr_b(SUMEXT_H); /* Sum Extend */ + +sfr_w(MPY32L); /* 32-bit operand 1 - multiply - low word */ +sfr_b(MPY32L_L); /* 32-bit operand 1 - multiply - low word */ +sfr_b(MPY32L_H); /* 32-bit operand 1 - multiply - low word */ +sfr_w(MPY32H); /* 32-bit operand 1 - multiply - high word */ +sfr_b(MPY32H_L); /* 32-bit operand 1 - multiply - high word */ +sfr_b(MPY32H_H); /* 32-bit operand 1 - multiply - high word */ +sfr_w(MPYS32L); /* 32-bit operand 1 - signed multiply - low word */ +sfr_b(MPYS32L_L); /* 32-bit operand 1 - signed multiply - low word */ +sfr_b(MPYS32L_H); /* 32-bit operand 1 - signed multiply - low word */ +sfr_w(MPYS32H); /* 32-bit operand 1 - signed multiply - high word */ +sfr_b(MPYS32H_L); /* 32-bit operand 1 - signed multiply - high word */ +sfr_b(MPYS32H_H); /* 32-bit operand 1 - signed multiply - high word */ +sfr_w(MAC32L); /* 32-bit operand 1 - multiply accumulate - low word */ +sfr_b(MAC32L_L); /* 32-bit operand 1 - multiply accumulate - low word */ +sfr_b(MAC32L_H); /* 32-bit operand 1 - multiply accumulate - low word */ +sfr_w(MAC32H); /* 32-bit operand 1 - multiply accumulate - high word */ +sfr_b(MAC32H_L); /* 32-bit operand 1 - multiply accumulate - high word */ +sfr_b(MAC32H_H); /* 32-bit operand 1 - multiply accumulate - high word */ +sfr_w(MACS32L); /* 32-bit operand 1 - signed multiply accumulate - low word */ +sfr_b(MACS32L_L); /* 32-bit operand 1 - signed multiply accumulate - low word */ +sfr_b(MACS32L_H); /* 32-bit operand 1 - signed multiply accumulate - low word */ +sfr_w(MACS32H); /* 32-bit operand 1 - signed multiply accumulate - high word */ +sfr_b(MACS32H_L); /* 32-bit operand 1 - signed multiply accumulate - high word */ +sfr_b(MACS32H_H); /* 32-bit operand 1 - signed multiply accumulate - high word */ +sfr_w(OP2L); /* 32-bit operand 2 - low word */ +sfr_b(OP2L_L); /* 32-bit operand 2 - low word */ +sfr_b(OP2L_H); /* 32-bit operand 2 - low word */ +sfr_w(OP2H); /* 32-bit operand 2 - high word */ +sfr_b(OP2H_L); /* 32-bit operand 2 - high word */ +sfr_b(OP2H_H); /* 32-bit operand 2 - high word */ +sfr_w(RES0); /* 32x32-bit result 0 - least significant word */ +sfr_b(RES0_L); /* 32x32-bit result 0 - least significant word */ +sfr_b(RES0_H); /* 32x32-bit result 0 - least significant word */ +sfr_w(RES1); /* 32x32-bit result 1 */ +sfr_b(RES1_L); /* 32x32-bit result 1 */ +sfr_b(RES1_H); /* 32x32-bit result 1 */ +sfr_w(RES2); /* 32x32-bit result 2 */ +sfr_b(RES2_L); /* 32x32-bit result 2 */ +sfr_b(RES2_H); /* 32x32-bit result 2 */ +sfr_w(RES3); /* 32x32-bit result 3 - most significant word */ +sfr_b(RES3_L); /* 32x32-bit result 3 - most significant word */ +sfr_b(RES3_H); /* 32x32-bit result 3 - most significant word */ +sfr_w(MPY32CTL0); /* MPY32 Control Register 0 */ +sfr_b(MPY32CTL0_L); /* MPY32 Control Register 0 */ +sfr_b(MPY32CTL0_H); /* MPY32 Control Register 0 */ + +#define MPY_B MPY_L /* Multiply Unsigned/Operand 1 (Byte Access) */ +#define MPYS_B MPYS_L /* Multiply Signed/Operand 1 (Byte Access) */ +#define MAC_B MAC_L /* Multiply Unsigned and Accumulate/Operand 1 (Byte Access) */ +#define MACS_B MACS_L /* Multiply Signed and Accumulate/Operand 1 (Byte Access) */ +#define OP2_B OP2_L /* Operand 2 (Byte Access) */ +#define MPY32L_B MPY32L_L /* 32-bit operand 1 - multiply - low word (Byte Access) */ +#define MPY32H_B MPY32H_L /* 32-bit operand 1 - multiply - high word (Byte Access) */ +#define MPYS32L_B MPYS32L_L /* 32-bit operand 1 - signed multiply - low word (Byte Access) */ +#define MPYS32H_B MPYS32H_L /* 32-bit operand 1 - signed multiply - high word (Byte Access) */ +#define MAC32L_B MAC32L_L /* 32-bit operand 1 - multiply accumulate - low word (Byte Access) */ +#define MAC32H_B MAC32H_L /* 32-bit operand 1 - multiply accumulate - high word (Byte Access) */ +#define MACS32L_B MACS32L_L /* 32-bit operand 1 - signed multiply accumulate - low word (Byte Access) */ +#define MACS32H_B MACS32H_L /* 32-bit operand 1 - signed multiply accumulate - high word (Byte Access) */ +#define OP2L_B OP2L_L /* 32-bit operand 2 - low word (Byte Access) */ +#define OP2H_B OP2H_L /* 32-bit operand 2 - high word (Byte Access) */ + +/* MPY32CTL0 Control Bits */ +#define MPYC (0x0001) /* Carry of the multiplier */ +//#define RESERVED (0x0002) /* Reserved */ +#define MPYFRAC (0x0004) /* Fractional mode */ +#define MPYSAT (0x0008) /* Saturation mode */ +#define MPYM0 (0x0010) /* Multiplier mode Bit:0 */ +#define MPYM1 (0x0020) /* Multiplier mode Bit:1 */ +#define OP1_32 (0x0040) /* Bit-width of operand 1 0:16Bit / 1:32Bit */ +#define OP2_32 (0x0080) /* Bit-width of operand 2 0:16Bit / 1:32Bit */ +#define MPYDLYWRTEN (0x0100) /* Delayed write enable */ +#define MPYDLY32 (0x0200) /* Delayed write mode */ + +/* MPY32CTL0 Control Bits */ +#define MPYC_L (0x0001) /* Carry of the multiplier */ +//#define RESERVED (0x0002) /* Reserved */ +#define MPYFRAC_L (0x0004) /* Fractional mode */ +#define MPYSAT_L (0x0008) /* Saturation mode */ +#define MPYM0_L (0x0010) /* Multiplier mode Bit:0 */ +#define MPYM1_L (0x0020) /* Multiplier mode Bit:1 */ +#define OP1_32_L (0x0040) /* Bit-width of operand 1 0:16Bit / 1:32Bit */ +#define OP2_32_L (0x0080) /* Bit-width of operand 2 0:16Bit / 1:32Bit */ + +/* MPY32CTL0 Control Bits */ +//#define RESERVED (0x0002) /* Reserved */ +#define MPYDLYWRTEN_H (0x0001) /* Delayed write enable */ +#define MPYDLY32_H (0x0002) /* Delayed write mode */ + +#define MPYM_0 (0x0000) /* Multiplier mode: MPY */ +#define MPYM_1 (0x0010) /* Multiplier mode: MPYS */ +#define MPYM_2 (0x0020) /* Multiplier mode: MAC */ +#define MPYM_3 (0x0030) /* Multiplier mode: MACS */ +#define MPYM__MPY (0x0000) /* Multiplier mode: MPY */ +#define MPYM__MPYS (0x0010) /* Multiplier mode: MPYS */ +#define MPYM__MAC (0x0020) /* Multiplier mode: MAC */ +#define MPYM__MACS (0x0030) /* Multiplier mode: MACS */ + +/************************************************************ +* PMM - Power Management System for FRAM +************************************************************/ +#define __MSP430_HAS_PMM_FRAM__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PMM_FRAM__ 0x0120 +#define PMM_BASE __MSP430_BASEADDRESS_PMM_FRAM__ + +sfr_w(PMMCTL0); /* PMM Control 0 */ +sfr_b(PMMCTL0_L); /* PMM Control 0 */ +sfr_b(PMMCTL0_H); /* PMM Control 0 */ +sfr_w(PMMIFG); /* PMM Interrupt Flag */ +sfr_b(PMMIFG_L); /* PMM Interrupt Flag */ +sfr_b(PMMIFG_H); /* PMM Interrupt Flag */ +sfr_w(PM5CTL0); /* PMM Power Mode 5 Control Register 0 */ +sfr_b(PM5CTL0_L); /* PMM Power Mode 5 Control Register 0 */ +sfr_b(PM5CTL0_H); /* PMM Power Mode 5 Control Register 0 */ + +#define PMMPW (0xA500) /* PMM Register Write Password */ +#define PMMPW_H (0xA5) /* PMM Register Write Password for high word access */ + +/* PMMCTL0 Control Bits */ +#define PMMSWBOR (0x0004) /* PMM Software BOR */ +#define PMMSWPOR (0x0008) /* PMM Software POR */ +#define PMMREGOFF (0x0010) /* PMM Turn Regulator off */ +#define SVSHE (0x0040) /* SVS high side enable */ +#define PMMLPRST (0x0080) /* PMM Low-Power Reset Enable */ + +/* PMMCTL0 Control Bits */ +#define PMMSWBOR_L (0x0004) /* PMM Software BOR */ +#define PMMSWPOR_L (0x0008) /* PMM Software POR */ +#define PMMREGOFF_L (0x0010) /* PMM Turn Regulator off */ +#define SVSHE_L (0x0040) /* SVS high side enable */ +#define PMMLPRST_L (0x0080) /* PMM Low-Power Reset Enable */ + +/* PMMIFG Control Bits */ +#define PMMBORIFG (0x0100) /* PMM Software BOR interrupt flag */ +#define PMMRSTIFG (0x0200) /* PMM RESET pin interrupt flag */ +#define PMMPORIFG (0x0400) /* PMM Software POR interrupt flag */ +#define SVSHIFG (0x2000) /* SVS low side interrupt flag */ +#define PMMLPM5IFG (0x8000) /* LPM5 indication Flag */ + +/* PMMIFG Control Bits */ +#define PMMBORIFG_H (0x0001) /* PMM Software BOR interrupt flag */ +#define PMMRSTIFG_H (0x0002) /* PMM RESET pin interrupt flag */ +#define PMMPORIFG_H (0x0004) /* PMM Software POR interrupt flag */ +#define SVSHIFG_H (0x0020) /* SVS low side interrupt flag */ +#define PMMLPM5IFG_H (0x0080) /* LPM5 indication Flag */ + +/* PM5CTL0 Power Mode 5 Control Bits */ +#define LOCKLPM5 (0x0001) /* Lock I/O pin configuration upon entry/exit to/from LPM5 */ + +/* PM5CTL0 Power Mode 5 Control Bits */ +#define LOCKLPM5_L (0x0001) /* Lock I/O pin configuration upon entry/exit to/from LPM5 */ + + +/************************************************************ +* DIGITAL I/O Port1/2 Pull up / Pull down Resistors +************************************************************/ +#define __MSP430_HAS_PORT1_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT1_R__ 0x0200 +#define P1_BASE __MSP430_BASEADDRESS_PORT1_R__ +#define __MSP430_HAS_PORT2_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT2_R__ 0x0200 +#define P2_BASE __MSP430_BASEADDRESS_PORT2_R__ +#define __MSP430_HAS_PORTA_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORTA_R__ 0x0200 +#define PA_BASE __MSP430_BASEADDRESS_PORTA_R__ +#define __MSP430_HAS_P1SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P2SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_PASEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P1SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_P2SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_PASEL1__ /* Define for DriverLib */ + +sfr_w(PAIN); /* Port A Input */ +sfr_b(PAIN_L); /* Port A Input */ +sfr_b(PAIN_H); /* Port A Input */ +sfr_w(PAOUT); /* Port A Output */ +sfr_b(PAOUT_L); /* Port A Output */ +sfr_b(PAOUT_H); /* Port A Output */ +sfr_w(PADIR); /* Port A Direction */ +sfr_b(PADIR_L); /* Port A Direction */ +sfr_b(PADIR_H); /* Port A Direction */ +sfr_w(PAREN); /* Port A Resistor Enable */ +sfr_b(PAREN_L); /* Port A Resistor Enable */ +sfr_b(PAREN_H); /* Port A Resistor Enable */ +sfr_w(PASEL0); /* Port A Selection 0 */ +sfr_b(PASEL0_L); /* Port A Selection 0 */ +sfr_b(PASEL0_H); /* Port A Selection 0 */ +sfr_w(PASEL1); /* Port A Selection 1 */ +sfr_b(PASEL1_L); /* Port A Selection 1 */ +sfr_b(PASEL1_H); /* Port A Selection 1 */ +sfr_w(PASELC); /* Port A Complement Selection */ +sfr_b(PASELC_L); /* Port A Complement Selection */ +sfr_b(PASELC_H); /* Port A Complement Selection */ +sfr_w(PAIES); /* Port A Interrupt Edge Select */ +sfr_b(PAIES_L); /* Port A Interrupt Edge Select */ +sfr_b(PAIES_H); /* Port A Interrupt Edge Select */ +sfr_w(PAIE); /* Port A Interrupt Enable */ +sfr_b(PAIE_L); /* Port A Interrupt Enable */ +sfr_b(PAIE_H); /* Port A Interrupt Enable */ +sfr_w(PAIFG); /* Port A Interrupt Flag */ +sfr_b(PAIFG_L); /* Port A Interrupt Flag */ +sfr_b(PAIFG_H); /* Port A Interrupt Flag */ + + +sfr_w(P1IV); /* Port 1 Interrupt Vector Word */ +sfr_w(P2IV); /* Port 2 Interrupt Vector Word */ +#define P1IN (PAIN_L) /* Port 1 Input */ +#define P1OUT (PAOUT_L) /* Port 1 Output */ +#define P1DIR (PADIR_L) /* Port 1 Direction */ +#define P1REN (PAREN_L) /* Port 1 Resistor Enable */ +#define P1SEL0 (PASEL0_L) /* Port 1 Selection 0 */ +#define P1SEL1 (PASEL1_L) /* Port 1 Selection 1 */ +#define P1SELC (PASELC_L) /* Port 1 Complement Selection */ +#define P1IES (PAIES_L) /* Port 1 Interrupt Edge Select */ +#define P1IE (PAIE_L) /* Port 1 Interrupt Enable */ +#define P1IFG (PAIFG_L) /* Port 1 Interrupt Flag */ + +//Definitions for P1IV +#define P1IV_NONE (0x0000) /* No Interrupt pending */ +#define P1IV_P1IFG0 (0x0002) /* P1IV P1IFG.0 */ +#define P1IV_P1IFG1 (0x0004) /* P1IV P1IFG.1 */ +#define P1IV_P1IFG2 (0x0006) /* P1IV P1IFG.2 */ +#define P1IV_P1IFG3 (0x0008) /* P1IV P1IFG.3 */ +#define P1IV_P1IFG4 (0x000A) /* P1IV P1IFG.4 */ +#define P1IV_P1IFG5 (0x000C) /* P1IV P1IFG.5 */ +#define P1IV_P1IFG6 (0x000E) /* P1IV P1IFG.6 */ +#define P1IV_P1IFG7 (0x0010) /* P1IV P1IFG.7 */ + +#define P2IN (PAIN_H) /* Port 2 Input */ +#define P2OUT (PAOUT_H) /* Port 2 Output */ +#define P2DIR (PADIR_H) /* Port 2 Direction */ +#define P2REN (PAREN_H) /* Port 2 Resistor Enable */ +#define P2SEL0 (PASEL0_H) /* Port 2 Selection 0 */ +#define P2SEL1 (PASEL1_H) /* Port 2 Selection 1 */ +#define P2SELC (PASELC_H) /* Port 2 Complement Selection */ +#define P2IES (PAIES_H) /* Port 2 Interrupt Edge Select */ +#define P2IE (PAIE_H) /* Port 2 Interrupt Enable */ +#define P2IFG (PAIFG_H) /* Port 2 Interrupt Flag */ + +//Definitions for P2IV +#define P2IV_NONE (0x0000) /* No Interrupt pending */ +#define P2IV_P2IFG0 (0x0002) /* P2IV P2IFG.0 */ +#define P2IV_P2IFG1 (0x0004) /* P2IV P2IFG.1 */ +#define P2IV_P2IFG2 (0x0006) /* P2IV P2IFG.2 */ +#define P2IV_P2IFG3 (0x0008) /* P2IV P2IFG.3 */ +#define P2IV_P2IFG4 (0x000A) /* P2IV P2IFG.4 */ +#define P2IV_P2IFG5 (0x000C) /* P2IV P2IFG.5 */ +#define P2IV_P2IFG6 (0x000E) /* P2IV P2IFG.6 */ +#define P2IV_P2IFG7 (0x0010) /* P2IV P2IFG.7 */ + + +/************************************************************ +* DIGITAL I/O Port3/4 Pull up / Pull down Resistors +************************************************************/ +#define __MSP430_HAS_PORT3_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT3_R__ 0x0220 +#define P3_BASE __MSP430_BASEADDRESS_PORT3_R__ +#define __MSP430_HAS_PORT4_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT4_R__ 0x0220 +#define P4_BASE __MSP430_BASEADDRESS_PORT4_R__ +#define __MSP430_HAS_PORTB_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORTB_R__ 0x0220 +#define PB_BASE __MSP430_BASEADDRESS_PORTB_R__ +#define __MSP430_HAS_P3SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P4SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_PBSEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P3SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_P4SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_PBSEL1__ /* Define for DriverLib */ + +sfr_w(PBIN); /* Port B Input */ +sfr_b(PBIN_L); /* Port B Input */ +sfr_b(PBIN_H); /* Port B Input */ +sfr_w(PBOUT); /* Port B Output */ +sfr_b(PBOUT_L); /* Port B Output */ +sfr_b(PBOUT_H); /* Port B Output */ +sfr_w(PBDIR); /* Port B Direction */ +sfr_b(PBDIR_L); /* Port B Direction */ +sfr_b(PBDIR_H); /* Port B Direction */ +sfr_w(PBREN); /* Port B Resistor Enable */ +sfr_b(PBREN_L); /* Port B Resistor Enable */ +sfr_b(PBREN_H); /* Port B Resistor Enable */ +sfr_w(PBSEL0); /* Port B Selection 0 */ +sfr_b(PBSEL0_L); /* Port B Selection 0 */ +sfr_b(PBSEL0_H); /* Port B Selection 0 */ +sfr_w(PBSEL1); /* Port B Selection 1 */ +sfr_b(PBSEL1_L); /* Port B Selection 1 */ +sfr_b(PBSEL1_H); /* Port B Selection 1 */ +sfr_w(PBSELC); /* Port B Complement Selection */ +sfr_b(PBSELC_L); /* Port B Complement Selection */ +sfr_b(PBSELC_H); /* Port B Complement Selection */ +sfr_w(PBIES); /* Port B Interrupt Edge Select */ +sfr_b(PBIES_L); /* Port B Interrupt Edge Select */ +sfr_b(PBIES_H); /* Port B Interrupt Edge Select */ +sfr_w(PBIE); /* Port B Interrupt Enable */ +sfr_b(PBIE_L); /* Port B Interrupt Enable */ +sfr_b(PBIE_H); /* Port B Interrupt Enable */ +sfr_w(PBIFG); /* Port B Interrupt Flag */ +sfr_b(PBIFG_L); /* Port B Interrupt Flag */ +sfr_b(PBIFG_H); /* Port B Interrupt Flag */ + + +sfr_w(P3IV); /* Port 3 Interrupt Vector Word */ +sfr_w(P4IV); /* Port 4 Interrupt Vector Word */ +#define P3IN (PBIN_L) /* Port 3 Input */ +#define P3OUT (PBOUT_L) /* Port 3 Output */ +#define P3DIR (PBDIR_L) /* Port 3 Direction */ +#define P3REN (PBREN_L) /* Port 3 Resistor Enable */ +#define P3SEL0 (PBSEL0_L) /* Port 3 Selection 0 */ +#define P3SEL1 (PBSEL1_L) /* Port 3 Selection 1 */ +#define P3SELC (PBSELC_L) /* Port 3 Complement Selection */ +#define P3IES (PBIES_L) /* Port 3 Interrupt Edge Select */ +#define P3IE (PBIE_L) /* Port 3 Interrupt Enable */ +#define P3IFG (PBIFG_L) /* Port 3 Interrupt Flag */ + +//Definitions for P3IV +#define P3IV_NONE (0x0000) /* No Interrupt pending */ +#define P3IV_P3IFG0 (0x0002) /* P3IV P3IFG.0 */ +#define P3IV_P3IFG1 (0x0004) /* P3IV P3IFG.1 */ +#define P3IV_P3IFG2 (0x0006) /* P3IV P3IFG.2 */ +#define P3IV_P3IFG3 (0x0008) /* P3IV P3IFG.3 */ +#define P3IV_P3IFG4 (0x000A) /* P3IV P3IFG.4 */ +#define P3IV_P3IFG5 (0x000C) /* P3IV P3IFG.5 */ +#define P3IV_P3IFG6 (0x000E) /* P3IV P3IFG.6 */ +#define P3IV_P3IFG7 (0x0010) /* P3IV P3IFG.7 */ + +#define P4IN (PBIN_H) /* Port 4 Input */ +#define P4OUT (PBOUT_H) /* Port 4 Output */ +#define P4DIR (PBDIR_H) /* Port 4 Direction */ +#define P4REN (PBREN_H) /* Port 4 Resistor Enable */ +#define P4SEL0 (PBSEL0_H) /* Port 4 Selection 0 */ +#define P4SEL1 (PBSEL1_H) /* Port 4 Selection 1 */ +#define P4SELC (PBSELC_H) /* Port 4 Complement Selection */ +#define P4IES (PBIES_H) /* Port 4 Interrupt Edge Select */ +#define P4IE (PBIE_H) /* Port 4 Interrupt Enable */ +#define P4IFG (PBIFG_H) /* Port 4 Interrupt Flag */ + +//Definitions for P4IV +#define P4IV_NONE (0x0000) /* No Interrupt pending */ +#define P4IV_P4IFG0 (0x0002) /* P4IV P4IFG.0 */ +#define P4IV_P4IFG1 (0x0004) /* P4IV P4IFG.1 */ +#define P4IV_P4IFG2 (0x0006) /* P4IV P4IFG.2 */ +#define P4IV_P4IFG3 (0x0008) /* P4IV P4IFG.3 */ +#define P4IV_P4IFG4 (0x000A) /* P4IV P4IFG.4 */ +#define P4IV_P4IFG5 (0x000C) /* P4IV P4IFG.5 */ +#define P4IV_P4IFG6 (0x000E) /* P4IV P4IFG.6 */ +#define P4IV_P4IFG7 (0x0010) /* P4IV P4IFG.7 */ + + +/************************************************************ +* DIGITAL I/O Port5/6 Pull up / Pull down Resistors +************************************************************/ +#define __MSP430_HAS_PORT5_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT5_R__ 0x0240 +#define P5_BASE __MSP430_BASEADDRESS_PORT5_R__ +#define __MSP430_HAS_PORT6_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT6_R__ 0x0240 +#define P6_BASE __MSP430_BASEADDRESS_PORT6_R__ +#define __MSP430_HAS_PORTC_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORTC_R__ 0x0240 +#define PC_BASE __MSP430_BASEADDRESS_PORTC_R__ +#define __MSP430_HAS_P5SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P6SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_PCSEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P5SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_P6SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_PCSEL1__ /* Define for DriverLib */ + +sfr_w(PCIN); /* Port C Input */ +sfr_b(PCIN_L); /* Port C Input */ +sfr_b(PCIN_H); /* Port C Input */ +sfr_w(PCOUT); /* Port C Output */ +sfr_b(PCOUT_L); /* Port C Output */ +sfr_b(PCOUT_H); /* Port C Output */ +sfr_w(PCDIR); /* Port C Direction */ +sfr_b(PCDIR_L); /* Port C Direction */ +sfr_b(PCDIR_H); /* Port C Direction */ +sfr_w(PCREN); /* Port C Resistor Enable */ +sfr_b(PCREN_L); /* Port C Resistor Enable */ +sfr_b(PCREN_H); /* Port C Resistor Enable */ +sfr_w(PCSEL0); /* Port C Selection 0 */ +sfr_b(PCSEL0_L); /* Port C Selection 0 */ +sfr_b(PCSEL0_H); /* Port C Selection 0 */ +sfr_w(PCSEL1); /* Port C Selection 1 */ +sfr_b(PCSEL1_L); /* Port C Selection 1 */ +sfr_b(PCSEL1_H); /* Port C Selection 1 */ +sfr_w(PCSELC); /* Port C Complement Selection */ +sfr_b(PCSELC_L); /* Port C Complement Selection */ +sfr_b(PCSELC_H); /* Port C Complement Selection */ + + +#define P5IN (PCIN_L) /* Port 5 Input */ +#define P5OUT (PCOUT_L) /* Port 5 Output */ +#define P5DIR (PCDIR_L) /* Port 5 Direction */ +#define P5REN (PCREN_L) /* Port 5 Resistor Enable */ +#define P5SEL0 (PCSEL0_L) /* Port 5 Selection 0 */ +#define P5SEL1 (PCSEL1_L) /* Port 5 Selection 1 */ +#define P5SELC (PCSELC_L) /* Port 5 Complement Selection */ + +#define P6IN (PCIN_H) /* Port 6 Input */ +#define P6OUT (PCOUT_H) /* Port 6 Output */ +#define P6DIR (PCDIR_H) /* Port 6 Direction */ +#define P6REN (PCREN_H) /* Port 6 Resistor Enable */ +#define P6SEL0 (PCSEL0_H) /* Port 6 Selection 0 */ +#define P6SEL1 (PCSEL1_H) /* Port 6 Selection 1 */ +#define P6SELC (PCSELC_H) /* Port 6 Complement Selection */ + + +/************************************************************ +* DIGITAL I/O Port7/8 Pull up / Pull down Resistors +************************************************************/ +#define __MSP430_HAS_PORT7_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT7_R__ 0x0260 +#define P7_BASE __MSP430_BASEADDRESS_PORT7_R__ +#define __MSP430_HAS_PORT8_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT8_R__ 0x0260 +#define P8_BASE __MSP430_BASEADDRESS_PORT8_R__ +#define __MSP430_HAS_PORTD_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORTD_R__ 0x0260 +#define PD_BASE __MSP430_BASEADDRESS_PORTD_R__ +#define __MSP430_HAS_P7SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P8SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_PDSEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P7SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_P8SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_PDSEL1__ /* Define for DriverLib */ + +sfr_w(PDIN); /* Port D Input */ +sfr_b(PDIN_L); /* Port D Input */ +sfr_b(PDIN_H); /* Port D Input */ +sfr_w(PDOUT); /* Port D Output */ +sfr_b(PDOUT_L); /* Port D Output */ +sfr_b(PDOUT_H); /* Port D Output */ +sfr_w(PDDIR); /* Port D Direction */ +sfr_b(PDDIR_L); /* Port D Direction */ +sfr_b(PDDIR_H); /* Port D Direction */ +sfr_w(PDREN); /* Port D Resistor Enable */ +sfr_b(PDREN_L); /* Port D Resistor Enable */ +sfr_b(PDREN_H); /* Port D Resistor Enable */ +sfr_w(PDSEL0); /* Port D Selection 0 */ +sfr_b(PDSEL0_L); /* Port D Selection 0 */ +sfr_b(PDSEL0_H); /* Port D Selection 0 */ +sfr_w(PDSEL1); /* Port D Selection 1 */ +sfr_b(PDSEL1_L); /* Port D Selection 1 */ +sfr_b(PDSEL1_H); /* Port D Selection 1 */ +sfr_w(PDSELC); /* Port D Complement Selection */ +sfr_b(PDSELC_L); /* Port D Complement Selection */ +sfr_b(PDSELC_H); /* Port D Complement Selection */ + + +#define P7IN (PDIN_L) /* Port 7 Input */ +#define P7OUT (PDOUT_L) /* Port 7 Output */ +#define P7DIR (PDDIR_L) /* Port 7 Direction */ +#define P7REN (PDREN_L) /* Port 7 Resistor Enable */ +#define P7SEL0 (PDSEL0_L) /* Port 7 Selection 0 */ +#define P7SEL1 (PDSEL1_L) /* Port 7 Selection 1 */ +#define P7SELC (PDSELC_L) /* Port 7 Complement Selection */ + +#define P8IN (PDIN_H) /* Port 8 Input */ +#define P8OUT (PDOUT_H) /* Port 8 Output */ +#define P8DIR (PDDIR_H) /* Port 8 Direction */ +#define P8REN (PDREN_H) /* Port 8 Resistor Enable */ +#define P8SEL0 (PDSEL0_H) /* Port 8 Selection 0 */ +#define P8SEL1 (PDSEL1_H) /* Port 8 Selection 1 */ +#define P8SELC (PDSELC_H) /* Port 8 Complement Selection */ + + +/************************************************************ +* DIGITAL I/O Port9/10 Pull up / Pull down Resistors +************************************************************/ +#define __MSP430_HAS_PORT9_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT9_R__ 0x0280 +#define P9_BASE __MSP430_BASEADDRESS_PORT9_R__ +#define __MSP430_HAS_PORT10_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORT10_R__ 0x0280 +#define P10_BASE __MSP430_BASEADDRESS_PORT10_R__ +#define __MSP430_HAS_PORTE_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORTE_R__ 0x0280 +#define PE_BASE __MSP430_BASEADDRESS_PORTE_R__ +#define __MSP430_HAS_P9SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P10SEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_PESEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_P9SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_P10SEL1__ /* Define for DriverLib */ +#define __MSP430_HAS_PESEL1__ /* Define for DriverLib */ + +sfr_w(PEIN); /* Port E Input */ +sfr_b(PEIN_L); /* Port E Input */ +sfr_b(PEIN_H); /* Port E Input */ +sfr_w(PEOUT); /* Port E Output */ +sfr_b(PEOUT_L); /* Port E Output */ +sfr_b(PEOUT_H); /* Port E Output */ +sfr_w(PEDIR); /* Port E Direction */ +sfr_b(PEDIR_L); /* Port E Direction */ +sfr_b(PEDIR_H); /* Port E Direction */ +sfr_w(PEREN); /* Port E Resistor Enable */ +sfr_b(PEREN_L); /* Port E Resistor Enable */ +sfr_b(PEREN_H); /* Port E Resistor Enable */ +sfr_w(PESEL0); /* Port E Selection 0 */ +sfr_b(PESEL0_L); /* Port E Selection 0 */ +sfr_b(PESEL0_H); /* Port E Selection 0 */ +sfr_w(PESEL1); /* Port E Selection 1 */ +sfr_b(PESEL1_L); /* Port E Selection 1 */ +sfr_b(PESEL1_H); /* Port E Selection 1 */ +sfr_w(PESELC); /* Port E Complement Selection */ +sfr_b(PESELC_L); /* Port E Complement Selection */ +sfr_b(PESELC_H); /* Port E Complement Selection */ + + +#define P9IN (PEIN_L) /* Port 9 Input */ +#define P9OUT (PEOUT_L) /* Port 9 Output */ +#define P9DIR (PEDIR_L) /* Port 9 Direction */ +#define P9REN (PEREN_L) /* Port 9 Resistor Enable */ +#define P9SEL0 (PESEL0_L) /* Port 9 Selection 0 */ +#define P9SEL1 (PESEL1_L) /* Port 9 Selection 1 */ +#define P9SELC (PESELC_L) /* Port 9 Complement Selection */ + +#define P10IN (PEIN_H) /* Port 10 Input */ +#define P10OUT (PEOUT_H) /* Port 10 Output */ +#define P10DIR (PEDIR_H) /* Port 10 Direction */ +#define P10REN (PEREN_H) /* Port 10 Resistor Enable */ +#define P10SEL0 (PESEL0_H) /* Port 10 Selection 0 */ +#define P10SEL1 (PESEL1_H) /* Port 10 Selection 1 */ +#define P10SELC (PESELC_H) /* Port 10 Complement Selection */ + + +/************************************************************ +* DIGITAL I/O PortJ Pull up / Pull down Resistors +************************************************************/ +#define __MSP430_HAS_PORTJ_R__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_PORTJ_R__ 0x0320 +#define PJ_BASE __MSP430_BASEADDRESS_PORTJ_R__ +#define __MSP430_HAS_PJSEL0__ /* Define for DriverLib */ +#define __MSP430_HAS_PJSEL1__ /* Define for DriverLib */ + +sfr_w(PJIN); /* Port J Input */ +sfr_b(PJIN_L); /* Port J Input */ +sfr_b(PJIN_H); /* Port J Input */ +sfr_w(PJOUT); /* Port J Output */ +sfr_b(PJOUT_L); /* Port J Output */ +sfr_b(PJOUT_H); /* Port J Output */ +sfr_w(PJDIR); /* Port J Direction */ +sfr_b(PJDIR_L); /* Port J Direction */ +sfr_b(PJDIR_H); /* Port J Direction */ +sfr_w(PJREN); /* Port J Resistor Enable */ +sfr_b(PJREN_L); /* Port J Resistor Enable */ +sfr_b(PJREN_H); /* Port J Resistor Enable */ +sfr_w(PJSEL0); /* Port J Selection 0 */ +sfr_b(PJSEL0_L); /* Port J Selection 0 */ +sfr_b(PJSEL0_H); /* Port J Selection 0 */ +sfr_w(PJSEL1); /* Port J Selection 1 */ +sfr_b(PJSEL1_L); /* Port J Selection 1 */ +sfr_b(PJSEL1_H); /* Port J Selection 1 */ +sfr_w(PJSELC); /* Port J Complement Selection */ +sfr_b(PJSELC_L); /* Port J Complement Selection */ +sfr_b(PJSELC_H); /* Port J Complement Selection */ + +/************************************************************* +* RAM Control Module for FRAM +*************************************************************/ +#define __MSP430_HAS_RC_FRAM__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_RC_FRAM__ 0x0158 +#define RAM_BASE __MSP430_BASEADDRESS_RC_FRAM__ + +sfr_w(RCCTL0); /* Ram Controller Control Register */ +sfr_b(RCCTL0_L); /* Ram Controller Control Register */ +sfr_b(RCCTL0_H); /* Ram Controller Control Register */ + +/* RCCTL0 Control Bits */ +#define RCRS0OFF0 (0x0001) /* RAM Controller RAM Sector 0 Off Bit: 0 */ +#define RCRS0OFF1 (0x0002) /* RAM Controller RAM Sector 0 Off Bit: 1 */ +#define RCRS1OFF0 (0x0004) /* RAM Controller RAM Sector 1 Off Bit: 0 */ +#define RCRS1OFF1 (0x0008) /* RAM Controller RAM Sector 1 Off Bit: 1 */ +#define RCRS2OFF0 (0x0010) /* RAM Controller RAM Sector 2 Off Bit: 0 */ +#define RCRS2OFF1 (0x0020) /* RAM Controller RAM Sector 2 Off Bit: 1 */ +#define RCRS3OFF0 (0x0040) /* RAM Controller RAM Sector 3 Off Bit: 0 */ +#define RCRS3OFF1 (0x0080) /* RAM Controller RAM Sector 3 Off Bit: 1 */ + +/* RCCTL0 Control Bits */ +#define RCRS0OFF0_L (0x0001) /* RAM Controller RAM Sector 0 Off Bit: 0 */ +#define RCRS0OFF1_L (0x0002) /* RAM Controller RAM Sector 0 Off Bit: 1 */ +#define RCRS1OFF0_L (0x0004) /* RAM Controller RAM Sector 1 Off Bit: 0 */ +#define RCRS1OFF1_L (0x0008) /* RAM Controller RAM Sector 1 Off Bit: 1 */ +#define RCRS2OFF0_L (0x0010) /* RAM Controller RAM Sector 2 Off Bit: 0 */ +#define RCRS2OFF1_L (0x0020) /* RAM Controller RAM Sector 2 Off Bit: 1 */ +#define RCRS3OFF0_L (0x0040) /* RAM Controller RAM Sector 3 Off Bit: 0 */ +#define RCRS3OFF1_L (0x0080) /* RAM Controller RAM Sector 3 Off Bit: 1 */ + +#define RCKEY (0x5A00) + +#define RCRS0OFF_0 (0x0000) /* RAM Controller RAM Sector 0 Off : 0 */ +#define RCRS0OFF_1 (0x0001) /* RAM Controller RAM Sector 0 Off : 1 */ +#define RCRS0OFF_2 (0x0002) /* RAM Controller RAM Sector 0 Off : 2 */ +#define RCRS0OFF_3 (0x0003) /* RAM Controller RAM Sector 0 Off : 3 */ +#define RCRS1OFF_0 (0x0000) /* RAM Controller RAM Sector 1 Off : 0 */ +#define RCRS1OFF_1 (0x0004) /* RAM Controller RAM Sector 1 Off : 1 */ +#define RCRS1OFF_2 (0x0008) /* RAM Controller RAM Sector 1 Off : 2 */ +#define RCRS1OFF_3 (0x000C) /* RAM Controller RAM Sector 1 Off : 3 */ +#define RCRS2OFF_0 (0x0000) /* RAM Controller RAM Sector 2 Off : 0 */ +#define RCRS2OFF_1 (0x0010) /* RAM Controller RAM Sector 2 Off : 1 */ +#define RCRS2OFF_2 (0x0020) /* RAM Controller RAM Sector 2 Off : 2 */ +#define RCRS2OFF_3 (0x0030) /* RAM Controller RAM Sector 2 Off : 3 */ +#define RCRS3OFF_0 (0x0000) /* RAM Controller RAM Sector 3 Off : 0 */ +#define RCRS3OFF_1 (0x0040) /* RAM Controller RAM Sector 3 Off : 1 */ +#define RCRS3OFF_2 (0x0080) /* RAM Controller RAM Sector 3 Off : 2 */ +#define RCRS3OFF_3 (0x00C0) /* RAM Controller RAM Sector 3 Off : 3 */ + +/************************************************************ +* Shared Reference +************************************************************/ +#define __MSP430_HAS_REF_A__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_REF_A__ 0x01B0 +#define REF_A_BASE __MSP430_BASEADDRESS_REF_A__ + +sfr_w(REFCTL0); /* REF Shared Reference control register 0 */ +sfr_b(REFCTL0_L); /* REF Shared Reference control register 0 */ +sfr_b(REFCTL0_H); /* REF Shared Reference control register 0 */ + +/* REFCTL0 Control Bits */ +#define REFON (0x0001) /* REF Reference On */ +#define REFOUT (0x0002) /* REF Reference output Buffer On */ +//#define RESERVED (0x0004) /* Reserved */ +#define REFTCOFF (0x0008) /* REF Temp.Sensor off */ +#define REFVSEL0 (0x0010) /* REF Reference Voltage Level Select Bit:0 */ +#define REFVSEL1 (0x0020) /* REF Reference Voltage Level Select Bit:1 */ +#define REFGENOT (0x0040) /* REF Reference generator one-time trigger */ +#define REFBGOT (0x0080) /* REF Bandgap and bandgap buffer one-time trigger */ +#define REFGENACT (0x0100) /* REF Reference generator active */ +#define REFBGACT (0x0200) /* REF Reference bandgap active */ +#define REFGENBUSY (0x0400) /* REF Reference generator busy */ +#define BGMODE (0x0800) /* REF Bandgap mode */ +#define REFGENRDY (0x1000) /* REF Reference generator ready */ +#define REFBGRDY (0x2000) /* REF Reference bandgap ready */ +//#define RESERVED (0x4000) /* Reserved */ +//#define RESERVED (0x8000) /* Reserved */ + +/* REFCTL0 Control Bits */ +#define REFON_L (0x0001) /* REF Reference On */ +#define REFOUT_L (0x0002) /* REF Reference output Buffer On */ +//#define RESERVED (0x0004) /* Reserved */ +#define REFTCOFF_L (0x0008) /* REF Temp.Sensor off */ +#define REFVSEL0_L (0x0010) /* REF Reference Voltage Level Select Bit:0 */ +#define REFVSEL1_L (0x0020) /* REF Reference Voltage Level Select Bit:1 */ +#define REFGENOT_L (0x0040) /* REF Reference generator one-time trigger */ +#define REFBGOT_L (0x0080) /* REF Bandgap and bandgap buffer one-time trigger */ +//#define RESERVED (0x4000) /* Reserved */ +//#define RESERVED (0x8000) /* Reserved */ + +/* REFCTL0 Control Bits */ +//#define RESERVED (0x0004) /* Reserved */ +#define REFGENACT_H (0x0001) /* REF Reference generator active */ +#define REFBGACT_H (0x0002) /* REF Reference bandgap active */ +#define REFGENBUSY_H (0x0004) /* REF Reference generator busy */ +#define BGMODE_H (0x0008) /* REF Bandgap mode */ +#define REFGENRDY_H (0x0010) /* REF Reference generator ready */ +#define REFBGRDY_H (0x0020) /* REF Reference bandgap ready */ +//#define RESERVED (0x4000) /* Reserved */ +//#define RESERVED (0x8000) /* Reserved */ + +#define REFVSEL_0 (0x0000) /* REF Reference Voltage Level Select 1.2V */ +#define REFVSEL_1 (0x0010) /* REF Reference Voltage Level Select 2.0V */ +#define REFVSEL_2 (0x0020) /* REF Reference Voltage Level Select 2.5V */ +#define REFVSEL_3 (0x0030) /* REF Reference Voltage Level Select 2.5V */ + +/************************************************************ +* Real Time Clock +************************************************************/ +#define __MSP430_HAS_RTC_C__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_RTC_C__ 0x04A0 +#define RTC_C_BASE __MSP430_BASEADDRESS_RTC_C__ + +sfr_w(RTCCTL0); /* Real Timer Clock Control 0/Key */ +sfr_b(RTCCTL0_L); /* Real Timer Clock Control 0/Key */ +sfr_b(RTCCTL0_H); /* Real Timer Clock Control 0/Key */ +#define RTCPWD RTCCTL0_H +sfr_w(RTCCTL13); /* Real Timer Clock Control 1/3 */ +sfr_b(RTCCTL13_L); /* Real Timer Clock Control 1/3 */ +sfr_b(RTCCTL13_H); /* Real Timer Clock Control 1/3 */ +#define RTCCTL1 RTCCTL13_L +#define RTCCTL3 RTCCTL13_H +sfr_w(RTCOCAL); /* Real Timer Clock Offset Calibartion */ +sfr_b(RTCOCAL_L); /* Real Timer Clock Offset Calibartion */ +sfr_b(RTCOCAL_H); /* Real Timer Clock Offset Calibartion */ +sfr_w(RTCTCMP); /* Real Timer Temperature Compensation */ +sfr_b(RTCTCMP_L); /* Real Timer Temperature Compensation */ +sfr_b(RTCTCMP_H); /* Real Timer Temperature Compensation */ +sfr_w(RTCPS0CTL); /* Real Timer Prescale Timer 0 Control */ +sfr_b(RTCPS0CTL_L); /* Real Timer Prescale Timer 0 Control */ +sfr_b(RTCPS0CTL_H); /* Real Timer Prescale Timer 0 Control */ +sfr_w(RTCPS1CTL); /* Real Timer Prescale Timer 1 Control */ +sfr_b(RTCPS1CTL_L); /* Real Timer Prescale Timer 1 Control */ +sfr_b(RTCPS1CTL_H); /* Real Timer Prescale Timer 1 Control */ +sfr_w(RTCPS); /* Real Timer Prescale Timer Control */ +sfr_b(RTCPS_L); /* Real Timer Prescale Timer Control */ +sfr_b(RTCPS_H); /* Real Timer Prescale Timer Control */ +sfr_w(RTCIV); /* Real Time Clock Interrupt Vector */ +sfr_w(RTCTIM0); /* Real Time Clock Time 0 */ +sfr_b(RTCTIM0_L); /* Real Time Clock Time 0 */ +sfr_b(RTCTIM0_H); /* Real Time Clock Time 0 */ +sfr_w(RTCTIM1); /* Real Time Clock Time 1 */ +sfr_b(RTCTIM1_L); /* Real Time Clock Time 1 */ +sfr_b(RTCTIM1_H); /* Real Time Clock Time 1 */ +sfr_w(RTCDATE); /* Real Time Clock Date */ +sfr_b(RTCDATE_L); /* Real Time Clock Date */ +sfr_b(RTCDATE_H); /* Real Time Clock Date */ +sfr_w(RTCYEAR); /* Real Time Clock Year */ +sfr_b(RTCYEAR_L); /* Real Time Clock Year */ +sfr_b(RTCYEAR_H); /* Real Time Clock Year */ +sfr_w(RTCAMINHR); /* Real Time Clock Alarm Min/Hour */ +sfr_b(RTCAMINHR_L); /* Real Time Clock Alarm Min/Hour */ +sfr_b(RTCAMINHR_H); /* Real Time Clock Alarm Min/Hour */ +sfr_w(RTCADOWDAY); /* Real Time Clock Alarm day of week/day */ +sfr_b(RTCADOWDAY_L); /* Real Time Clock Alarm day of week/day */ +sfr_b(RTCADOWDAY_H); /* Real Time Clock Alarm day of week/day */ +sfr_w(BIN2BCD); /* Real Time Binary-to-BCD conversion register */ +sfr_w(BCD2BIN); /* Real Time BCD-to-binary conversion register */ + +#define RTCSEC RTCTIM0_L +#define RTCMIN RTCTIM0_H +#define RTCHOUR RTCTIM1_L +#define RTCDOW RTCTIM1_H +#define RTCDAY RTCDATE_L +#define RTCMON RTCDATE_H +#define RTCYEARL RTCYEAR_L +#define RT0PS RTCPS_L +#define RT1PS RTCPS_H +#define RTCAMIN RTCAMINHR_L /* Real Time Clock Alarm Min */ +#define RTCAHOUR RTCAMINHR_H /* Real Time Clock Alarm Hour */ +#define RTCADOW RTCADOWDAY_L /* Real Time Clock Alarm day of week */ +#define RTCADAY RTCADOWDAY_H /* Real Time Clock Alarm day */ + +/* RTCCTL0 Control Bits */ +#define RTCOFIE (0x0080) /* RTC 32kHz cyrstal oscillator fault interrupt enable */ +#define RTCTEVIE (0x0040) /* RTC Time Event Interrupt Enable Flag */ +#define RTCAIE (0x0020) /* RTC Alarm Interrupt Enable Flag */ +#define RTCRDYIE (0x0010) /* RTC Ready Interrupt Enable Flag */ +#define RTCOFIFG (0x0008) /* RTC 32kHz cyrstal oscillator fault interrupt flag */ +#define RTCTEVIFG (0x0004) /* RTC Time Event Interrupt Flag */ +#define RTCAIFG (0x0002) /* RTC Alarm Interrupt Flag */ +#define RTCRDYIFG (0x0001) /* RTC Ready Interrupt Flag */ + +/* RTCCTL0 Control Bits */ +#define RTCOFIE_L (0x0080) /* RTC 32kHz cyrstal oscillator fault interrupt enable */ +#define RTCTEVIE_L (0x0040) /* RTC Time Event Interrupt Enable Flag */ +#define RTCAIE_L (0x0020) /* RTC Alarm Interrupt Enable Flag */ +#define RTCRDYIE_L (0x0010) /* RTC Ready Interrupt Enable Flag */ +#define RTCOFIFG_L (0x0008) /* RTC 32kHz cyrstal oscillator fault interrupt flag */ +#define RTCTEVIFG_L (0x0004) /* RTC Time Event Interrupt Flag */ +#define RTCAIFG_L (0x0002) /* RTC Alarm Interrupt Flag */ +#define RTCRDYIFG_L (0x0001) /* RTC Ready Interrupt Flag */ + +#define RTCKEY (0xA500) /* RTC Key for RTC write access */ +#define RTCKEY_H (0xA5) /* RTC Key for RTC write access (high word) */ + +/* RTCCTL13 Control Bits */ +#define RTCCALF1 (0x0200) /* RTC Calibration Frequency Bit 1 */ +#define RTCCALF0 (0x0100) /* RTC Calibration Frequency Bit 0 */ +#define RTCBCD (0x0080) /* RTC BCD 0:Binary / 1:BCD */ +#define RTCHOLD (0x0040) /* RTC Hold */ +#define RTCMODE (0x0020) /* RTC Mode 0:Counter / 1: Calendar */ +#define RTCRDY (0x0010) /* RTC Ready */ +#define RTCSSEL1 (0x0008) /* RTC Source Select 1 */ +#define RTCSSEL0 (0x0004) /* RTC Source Select 0 */ +#define RTCTEV1 (0x0002) /* RTC Time Event 1 */ +#define RTCTEV0 (0x0001) /* RTC Time Event 0 */ + +/* RTCCTL13 Control Bits */ +#define RTCBCD_L (0x0080) /* RTC BCD 0:Binary / 1:BCD */ +#define RTCHOLD_L (0x0040) /* RTC Hold */ +#define RTCMODE_L (0x0020) /* RTC Mode 0:Counter / 1: Calendar */ +#define RTCRDY_L (0x0010) /* RTC Ready */ +#define RTCSSEL1_L (0x0008) /* RTC Source Select 1 */ +#define RTCSSEL0_L (0x0004) /* RTC Source Select 0 */ +#define RTCTEV1_L (0x0002) /* RTC Time Event 1 */ +#define RTCTEV0_L (0x0001) /* RTC Time Event 0 */ + +/* RTCCTL13 Control Bits */ +#define RTCCALF1_H (0x0002) /* RTC Calibration Frequency Bit 1 */ +#define RTCCALF0_H (0x0001) /* RTC Calibration Frequency Bit 0 */ + +#define RTCSSEL_0 (0x0000) /* RTC Source Select ACLK */ +#define RTCSSEL_1 (0x0004) /* RTC Source Select SMCLK */ +#define RTCSSEL_2 (0x0008) /* RTC Source Select RT1PS */ +#define RTCSSEL_3 (0x000C) /* RTC Source Select RT1PS */ +#define RTCSSEL__LFXT (0x0000) /* RTC Source Select LFXT */ +#define RTCSSEL__RT1PS (0x0008) /* RTC Source Select RT1PS */ + +#define RTCSSEL__ACLK (0x0000) /* Legacy define */ + +#define RTCTEV_0 (0x0000) /* RTC Time Event: 0 (Min. changed) */ +#define RTCTEV_1 (0x0001) /* RTC Time Event: 1 (Hour changed) */ +#define RTCTEV_2 (0x0002) /* RTC Time Event: 2 (12:00 changed) */ +#define RTCTEV_3 (0x0003) /* RTC Time Event: 3 (00:00 changed) */ +#define RTCTEV__MIN (0x0000) /* RTC Time Event: 0 (Min. changed) */ +#define RTCTEV__HOUR (0x0001) /* RTC Time Event: 1 (Hour changed) */ +#define RTCTEV__0000 (0x0002) /* RTC Time Event: 2 (00:00 changed) */ +#define RTCTEV__1200 (0x0003) /* RTC Time Event: 3 (12:00 changed) */ + +#define RTCCALF_0 (0x0000) /* RTC Calibration Frequency: No Output */ +#define RTCCALF_1 (0x0100) /* RTC Calibration Frequency: 512 Hz */ +#define RTCCALF_2 (0x0200) /* RTC Calibration Frequency: 256 Hz */ +#define RTCCALF_3 (0x0300) /* RTC Calibration Frequency: 1 Hz */ + +/* RTCOCAL Control Bits */ +#define RTCOCALS (0x8000) /* RTC Offset Calibration Sign */ +#define RTCOCAL7 (0x0080) /* RTC Offset Calibration Bit 7 */ +#define RTCOCAL6 (0x0040) /* RTC Offset Calibration Bit 6 */ +#define RTCOCAL5 (0x0020) /* RTC Offset Calibration Bit 5 */ +#define RTCOCAL4 (0x0010) /* RTC Offset Calibration Bit 4 */ +#define RTCOCAL3 (0x0008) /* RTC Offset Calibration Bit 3 */ +#define RTCOCAL2 (0x0004) /* RTC Offset Calibration Bit 2 */ +#define RTCOCAL1 (0x0002) /* RTC Offset Calibration Bit 1 */ +#define RTCOCAL0 (0x0001) /* RTC Offset Calibration Bit 0 */ + +/* RTCOCAL Control Bits */ +#define RTCOCAL7_L (0x0080) /* RTC Offset Calibration Bit 7 */ +#define RTCOCAL6_L (0x0040) /* RTC Offset Calibration Bit 6 */ +#define RTCOCAL5_L (0x0020) /* RTC Offset Calibration Bit 5 */ +#define RTCOCAL4_L (0x0010) /* RTC Offset Calibration Bit 4 */ +#define RTCOCAL3_L (0x0008) /* RTC Offset Calibration Bit 3 */ +#define RTCOCAL2_L (0x0004) /* RTC Offset Calibration Bit 2 */ +#define RTCOCAL1_L (0x0002) /* RTC Offset Calibration Bit 1 */ +#define RTCOCAL0_L (0x0001) /* RTC Offset Calibration Bit 0 */ + +/* RTCOCAL Control Bits */ +#define RTCOCALS_H (0x0080) /* RTC Offset Calibration Sign */ + +/* RTCTCMP Control Bits */ +#define RTCTCMPS (0x8000) /* RTC Temperature Compensation Sign */ +#define RTCTCRDY (0x4000) /* RTC Temperature compensation ready */ +#define RTCTCOK (0x2000) /* RTC Temperature compensation write OK */ +#define RTCTCMP7 (0x0080) /* RTC Temperature Compensation Bit 7 */ +#define RTCTCMP6 (0x0040) /* RTC Temperature Compensation Bit 6 */ +#define RTCTCMP5 (0x0020) /* RTC Temperature Compensation Bit 5 */ +#define RTCTCMP4 (0x0010) /* RTC Temperature Compensation Bit 4 */ +#define RTCTCMP3 (0x0008) /* RTC Temperature Compensation Bit 3 */ +#define RTCTCMP2 (0x0004) /* RTC Temperature Compensation Bit 2 */ +#define RTCTCMP1 (0x0002) /* RTC Temperature Compensation Bit 1 */ +#define RTCTCMP0 (0x0001) /* RTC Temperature Compensation Bit 0 */ + +/* RTCTCMP Control Bits */ +#define RTCTCMP7_L (0x0080) /* RTC Temperature Compensation Bit 7 */ +#define RTCTCMP6_L (0x0040) /* RTC Temperature Compensation Bit 6 */ +#define RTCTCMP5_L (0x0020) /* RTC Temperature Compensation Bit 5 */ +#define RTCTCMP4_L (0x0010) /* RTC Temperature Compensation Bit 4 */ +#define RTCTCMP3_L (0x0008) /* RTC Temperature Compensation Bit 3 */ +#define RTCTCMP2_L (0x0004) /* RTC Temperature Compensation Bit 2 */ +#define RTCTCMP1_L (0x0002) /* RTC Temperature Compensation Bit 1 */ +#define RTCTCMP0_L (0x0001) /* RTC Temperature Compensation Bit 0 */ + +/* RTCTCMP Control Bits */ +#define RTCTCMPS_H (0x0080) /* RTC Temperature Compensation Sign */ +#define RTCTCRDY_H (0x0040) /* RTC Temperature compensation ready */ +#define RTCTCOK_H (0x0020) /* RTC Temperature compensation write OK */ + +#define RTCAE (0x80) /* Real Time Clock Alarm enable */ + +/* RTCPS0CTL Control Bits */ +//#define Reserved (0x8000) +//#define Reserved (0x4000) +#define RT0PSDIV2 (0x2000) /* RTC Prescale Timer 0 Clock Divide Bit: 2 */ +#define RT0PSDIV1 (0x1000) /* RTC Prescale Timer 0 Clock Divide Bit: 1 */ +#define RT0PSDIV0 (0x0800) /* RTC Prescale Timer 0 Clock Divide Bit: 0 */ +//#define Reserved (0x0400) +//#define Reserved (0x0200) +#define RT0PSHOLD (0x0100) /* RTC Prescale Timer 0 Hold */ +//#define Reserved (0x0080) +//#define Reserved (0x0040) +//#define Reserved (0x0020) +#define RT0IP2 (0x0010) /* RTC Prescale Timer 0 Interrupt Interval Bit: 2 */ +#define RT0IP1 (0x0008) /* RTC Prescale Timer 0 Interrupt Interval Bit: 1 */ +#define RT0IP0 (0x0004) /* RTC Prescale Timer 0 Interrupt Interval Bit: 0 */ +#define RT0PSIE (0x0002) /* RTC Prescale Timer 0 Interrupt Enable Flag */ +#define RT0PSIFG (0x0001) /* RTC Prescale Timer 0 Interrupt Flag */ + +/* RTCPS0CTL Control Bits */ +//#define Reserved (0x8000) +//#define Reserved (0x4000) +//#define Reserved (0x0400) +//#define Reserved (0x0200) +//#define Reserved (0x0080) +//#define Reserved (0x0040) +//#define Reserved (0x0020) +#define RT0IP2_L (0x0010) /* RTC Prescale Timer 0 Interrupt Interval Bit: 2 */ +#define RT0IP1_L (0x0008) /* RTC Prescale Timer 0 Interrupt Interval Bit: 1 */ +#define RT0IP0_L (0x0004) /* RTC Prescale Timer 0 Interrupt Interval Bit: 0 */ +#define RT0PSIE_L (0x0002) /* RTC Prescale Timer 0 Interrupt Enable Flag */ +#define RT0PSIFG_L (0x0001) /* RTC Prescale Timer 0 Interrupt Flag */ + +/* RTCPS0CTL Control Bits */ +//#define Reserved (0x8000) +//#define Reserved (0x4000) +#define RT0PSDIV2_H (0x0020) /* RTC Prescale Timer 0 Clock Divide Bit: 2 */ +#define RT0PSDIV1_H (0x0010) /* RTC Prescale Timer 0 Clock Divide Bit: 1 */ +#define RT0PSDIV0_H (0x0008) /* RTC Prescale Timer 0 Clock Divide Bit: 0 */ +//#define Reserved (0x0400) +//#define Reserved (0x0200) +#define RT0PSHOLD_H (0x0001) /* RTC Prescale Timer 0 Hold */ +//#define Reserved (0x0080) +//#define Reserved (0x0040) +//#define Reserved (0x0020) + +#define RT0IP_0 (0x0000) /* RTC Prescale Timer 0 Interrupt Interval /2 */ +#define RT0IP_1 (0x0004) /* RTC Prescale Timer 0 Interrupt Interval /4 */ +#define RT0IP_2 (0x0008) /* RTC Prescale Timer 0 Interrupt Interval /8 */ +#define RT0IP_3 (0x000C) /* RTC Prescale Timer 0 Interrupt Interval /16 */ +#define RT0IP_4 (0x0010) /* RTC Prescale Timer 0 Interrupt Interval /32 */ +#define RT0IP_5 (0x0014) /* RTC Prescale Timer 0 Interrupt Interval /64 */ +#define RT0IP_6 (0x0018) /* RTC Prescale Timer 0 Interrupt Interval /128 */ +#define RT0IP_7 (0x001C) /* RTC Prescale Timer 0 Interrupt Interval /256 */ + +#define RT0PSDIV_0 (0x0000) /* RTC Prescale Timer 0 Clock Divide: /2 */ +#define RT0PSDIV_1 (0x0800) /* RTC Prescale Timer 0 Clock Divide: /4 */ +#define RT0PSDIV_2 (0x1000) /* RTC Prescale Timer 0 Clock Divide: /8 */ +#define RT0PSDIV_3 (0x1800) /* RTC Prescale Timer 0 Clock Divide: /16 */ +#define RT0PSDIV_4 (0x2000) /* RTC Prescale Timer 0 Clock Divide: /32 */ +#define RT0PSDIV_5 (0x2800) /* RTC Prescale Timer 0 Clock Divide: /64 */ +#define RT0PSDIV_6 (0x3000) /* RTC Prescale Timer 0 Clock Divide: /128 */ +#define RT0PSDIV_7 (0x3800) /* RTC Prescale Timer 0 Clock Divide: /256 */ + +/* RTCPS1CTL Control Bits */ +#define RT1SSEL1 (0x8000) /* RTC Prescale Timer 1 Source Select Bit: 1 */ +#define RT1SSEL0 (0x4000) /* RTC Prescale Timer 1 Source Select Bit: 0 */ +#define RT1PSDIV2 (0x2000) /* RTC Prescale Timer 1 Clock Divide Bit: 2 */ +#define RT1PSDIV1 (0x1000) /* RTC Prescale Timer 1 Clock Divide Bit: 1 */ +#define RT1PSDIV0 (0x0800) /* RTC Prescale Timer 1 Clock Divide Bit: 0 */ +//#define Reserved (0x0400) +//#define Reserved (0x0200) +#define RT1PSHOLD (0x0100) /* RTC Prescale Timer 1 Hold */ +//#define Reserved (0x0080) +//#define Reserved (0x0040) +//#define Reserved (0x0020) +#define RT1IP2 (0x0010) /* RTC Prescale Timer 1 Interrupt Interval Bit: 2 */ +#define RT1IP1 (0x0008) /* RTC Prescale Timer 1 Interrupt Interval Bit: 1 */ +#define RT1IP0 (0x0004) /* RTC Prescale Timer 1 Interrupt Interval Bit: 0 */ +#define RT1PSIE (0x0002) /* RTC Prescale Timer 1 Interrupt Enable Flag */ +#define RT1PSIFG (0x0001) /* RTC Prescale Timer 1 Interrupt Flag */ + +/* RTCPS1CTL Control Bits */ +//#define Reserved (0x0400) +//#define Reserved (0x0200) +//#define Reserved (0x0080) +//#define Reserved (0x0040) +//#define Reserved (0x0020) +#define RT1IP2_L (0x0010) /* RTC Prescale Timer 1 Interrupt Interval Bit: 2 */ +#define RT1IP1_L (0x0008) /* RTC Prescale Timer 1 Interrupt Interval Bit: 1 */ +#define RT1IP0_L (0x0004) /* RTC Prescale Timer 1 Interrupt Interval Bit: 0 */ +#define RT1PSIE_L (0x0002) /* RTC Prescale Timer 1 Interrupt Enable Flag */ +#define RT1PSIFG_L (0x0001) /* RTC Prescale Timer 1 Interrupt Flag */ + +/* RTCPS1CTL Control Bits */ +#define RT1SSEL1_H (0x0080) /* RTC Prescale Timer 1 Source Select Bit: 1 */ +#define RT1SSEL0_H (0x0040) /* RTC Prescale Timer 1 Source Select Bit: 0 */ +#define RT1PSDIV2_H (0x0020) /* RTC Prescale Timer 1 Clock Divide Bit: 2 */ +#define RT1PSDIV1_H (0x0010) /* RTC Prescale Timer 1 Clock Divide Bit: 1 */ +#define RT1PSDIV0_H (0x0008) /* RTC Prescale Timer 1 Clock Divide Bit: 0 */ +//#define Reserved (0x0400) +//#define Reserved (0x0200) +#define RT1PSHOLD_H (0x0001) /* RTC Prescale Timer 1 Hold */ +//#define Reserved (0x0080) +//#define Reserved (0x0040) +//#define Reserved (0x0020) + +#define RT1IP_0 (0x0000) /* RTC Prescale Timer 1 Interrupt Interval /2 */ +#define RT1IP_1 (0x0004) /* RTC Prescale Timer 1 Interrupt Interval /4 */ +#define RT1IP_2 (0x0008) /* RTC Prescale Timer 1 Interrupt Interval /8 */ +#define RT1IP_3 (0x000C) /* RTC Prescale Timer 1 Interrupt Interval /16 */ +#define RT1IP_4 (0x0010) /* RTC Prescale Timer 1 Interrupt Interval /32 */ +#define RT1IP_5 (0x0014) /* RTC Prescale Timer 1 Interrupt Interval /64 */ +#define RT1IP_6 (0x0018) /* RTC Prescale Timer 1 Interrupt Interval /128 */ +#define RT1IP_7 (0x001C) /* RTC Prescale Timer 1 Interrupt Interval /256 */ + +#define RT1PSDIV_0 (0x0000) /* RTC Prescale Timer 1 Clock Divide: /2 */ +#define RT1PSDIV_1 (0x0800) /* RTC Prescale Timer 1 Clock Divide: /4 */ +#define RT1PSDIV_2 (0x1000) /* RTC Prescale Timer 1 Clock Divide: /8 */ +#define RT1PSDIV_3 (0x1800) /* RTC Prescale Timer 1 Clock Divide: /16 */ +#define RT1PSDIV_4 (0x2000) /* RTC Prescale Timer 1 Clock Divide: /32 */ +#define RT1PSDIV_5 (0x2800) /* RTC Prescale Timer 1 Clock Divide: /64 */ +#define RT1PSDIV_6 (0x3000) /* RTC Prescale Timer 1 Clock Divide: /128 */ +#define RT1PSDIV_7 (0x3800) /* RTC Prescale Timer 1 Clock Divide: /256 */ + +#define RT1SSEL_0 (0x0000) /* RTC Prescale Timer 1 Source Select: 0 */ +#define RT1SSEL_1 (0x4000) /* RTC Prescale Timer 1 Source Select: 1 */ +#define RT1SSEL_2 (0x8000) /* RTC Prescale Timer 1 Source Select: 2 */ +#define RT1SSEL_3 (0xC000) /* RTC Prescale Timer 1 Source Select: 3 */ + +/* RTC Definitions */ +#define RTCIV_NONE (0x0000) /* No Interrupt pending */ +#define RTCIV_RTCOFIFG (0x0002) /* RTC Osc fault: RTCOFIFG */ +#define RTCIV_RTCRDYIFG (0x0004) /* RTC ready: RTCRDYIFG */ +#define RTCIV_RTCTEVIFG (0x0006) /* RTC interval timer: RTCTEVIFG */ +#define RTCIV_RTCAIFG (0x0008) /* RTC user alarm: RTCAIFG */ +#define RTCIV_RT0PSIFG (0x000A) /* RTC prescaler 0: RT0PSIFG */ +#define RTCIV_RT1PSIFG (0x000C) /* RTC prescaler 1: RT1PSIFG */ + +/* Legacy Definitions */ +#define RTC_NONE (0x0000) /* No Interrupt pending */ +#define RTC_RTCOFIFG (0x0002) /* RTC Osc fault: RTCOFIFG */ +#define RTC_RTCRDYIFG (0x0004) /* RTC ready: RTCRDYIFG */ +#define RTC_RTCTEVIFG (0x0006) /* RTC interval timer: RTCTEVIFG */ +#define RTC_RTCAIFG (0x0008) /* RTC user alarm: RTCAIFG */ +#define RTC_RT0PSIFG (0x000A) /* RTC prescaler 0: RT0PSIFG */ +#define RTC_RT1PSIFG (0x000C) /* RTC prescaler 1: RT1PSIFG */ + +/************************************************************ +* SFR - Special Function Register Module +************************************************************/ +#define __MSP430_HAS_SFR__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_SFR__ 0x0100 +#define SFR_BASE __MSP430_BASEADDRESS_SFR__ + +sfr_w(SFRIE1); /* Interrupt Enable 1 */ +sfr_b(SFRIE1_L); /* Interrupt Enable 1 */ +sfr_b(SFRIE1_H); /* Interrupt Enable 1 */ + +/* SFRIE1 Control Bits */ +#define WDTIE (0x0001) /* WDT Interrupt Enable */ +#define OFIE (0x0002) /* Osc Fault Enable */ +//#define Reserved (0x0004) +#define VMAIE (0x0008) /* Vacant Memory Interrupt Enable */ +#define NMIIE (0x0010) /* NMI Interrupt Enable */ +#define JMBINIE (0x0040) /* JTAG Mail Box input Interrupt Enable */ +#define JMBOUTIE (0x0080) /* JTAG Mail Box output Interrupt Enable */ + +#define WDTIE_L (0x0001) /* WDT Interrupt Enable */ +#define OFIE_L (0x0002) /* Osc Fault Enable */ +//#define Reserved (0x0004) +#define VMAIE_L (0x0008) /* Vacant Memory Interrupt Enable */ +#define NMIIE_L (0x0010) /* NMI Interrupt Enable */ +#define JMBINIE_L (0x0040) /* JTAG Mail Box input Interrupt Enable */ +#define JMBOUTIE_L (0x0080) /* JTAG Mail Box output Interrupt Enable */ + +sfr_w(SFRIFG1); /* Interrupt Flag 1 */ +sfr_b(SFRIFG1_L); /* Interrupt Flag 1 */ +sfr_b(SFRIFG1_H); /* Interrupt Flag 1 */ +/* SFRIFG1 Control Bits */ +#define WDTIFG (0x0001) /* WDT Interrupt Flag */ +#define OFIFG (0x0002) /* Osc Fault Flag */ +//#define Reserved (0x0004) +#define VMAIFG (0x0008) /* Vacant Memory Interrupt Flag */ +#define NMIIFG (0x0010) /* NMI Interrupt Flag */ +//#define Reserved (0x0020) +#define JMBINIFG (0x0040) /* JTAG Mail Box input Interrupt Flag */ +#define JMBOUTIFG (0x0080) /* JTAG Mail Box output Interrupt Flag */ + +#define WDTIFG_L (0x0001) /* WDT Interrupt Flag */ +#define OFIFG_L (0x0002) /* Osc Fault Flag */ +//#define Reserved (0x0004) +#define VMAIFG_L (0x0008) /* Vacant Memory Interrupt Flag */ +#define NMIIFG_L (0x0010) /* NMI Interrupt Flag */ +//#define Reserved (0x0020) +#define JMBINIFG_L (0x0040) /* JTAG Mail Box input Interrupt Flag */ +#define JMBOUTIFG_L (0x0080) /* JTAG Mail Box output Interrupt Flag */ + +sfr_w(SFRRPCR); /* RESET Pin Control Register */ +sfr_b(SFRRPCR_L); /* RESET Pin Control Register */ +sfr_b(SFRRPCR_H); /* RESET Pin Control Register */ +/* SFRRPCR Control Bits */ +#define SYSNMI (0x0001) /* NMI select */ +#define SYSNMIIES (0x0002) /* NMI edge select */ +#define SYSRSTUP (0x0004) /* RESET Pin pull down/up select */ +#define SYSRSTRE (0x0008) /* RESET Pin Resistor enable */ + +#define SYSNMI_L (0x0001) /* NMI select */ +#define SYSNMIIES_L (0x0002) /* NMI edge select */ +#define SYSRSTUP_L (0x0004) /* RESET Pin pull down/up select */ +#define SYSRSTRE_L (0x0008) /* RESET Pin Resistor enable */ + +/************************************************************ +* SYS - System Module +************************************************************/ +#define __MSP430_HAS_SYS__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_SYS__ 0x0180 +#define SYS_BASE __MSP430_BASEADDRESS_SYS__ + +sfr_w(SYSCTL); /* System control */ +sfr_b(SYSCTL_L); /* System control */ +sfr_b(SYSCTL_H); /* System control */ +sfr_w(SYSJMBC); /* JTAG mailbox control */ +sfr_b(SYSJMBC_L); /* JTAG mailbox control */ +sfr_b(SYSJMBC_H); /* JTAG mailbox control */ +sfr_w(SYSJMBI0); /* JTAG mailbox input 0 */ +sfr_b(SYSJMBI0_L); /* JTAG mailbox input 0 */ +sfr_b(SYSJMBI0_H); /* JTAG mailbox input 0 */ +sfr_w(SYSJMBI1); /* JTAG mailbox input 1 */ +sfr_b(SYSJMBI1_L); /* JTAG mailbox input 1 */ +sfr_b(SYSJMBI1_H); /* JTAG mailbox input 1 */ +sfr_w(SYSJMBO0); /* JTAG mailbox output 0 */ +sfr_b(SYSJMBO0_L); /* JTAG mailbox output 0 */ +sfr_b(SYSJMBO0_H); /* JTAG mailbox output 0 */ +sfr_w(SYSJMBO1); /* JTAG mailbox output 1 */ +sfr_b(SYSJMBO1_L); /* JTAG mailbox output 1 */ +sfr_b(SYSJMBO1_H); /* JTAG mailbox output 1 */ + +sfr_w(SYSUNIV); /* User NMI vector generator */ +sfr_b(SYSUNIV_L); /* User NMI vector generator */ +sfr_b(SYSUNIV_H); /* User NMI vector generator */ +sfr_w(SYSSNIV); /* System NMI vector generator */ +sfr_b(SYSSNIV_L); /* System NMI vector generator */ +sfr_b(SYSSNIV_H); /* System NMI vector generator */ +sfr_w(SYSRSTIV); /* Reset vector generator */ +sfr_b(SYSRSTIV_L); /* Reset vector generator */ +sfr_b(SYSRSTIV_H); /* Reset vector generator */ + +/* SYSCTL Control Bits */ +#define SYSRIVECT (0x0001) /* SYS - RAM based interrupt vectors */ +//#define RESERVED (0x0002) /* SYS - Reserved */ +#define SYSPMMPE (0x0004) /* SYS - PMM access protect */ +//#define RESERVED (0x0008) /* SYS - Reserved */ +#define SYSBSLIND (0x0010) /* SYS - TCK/RST indication detected */ +#define SYSJTAGPIN (0x0020) /* SYS - Dedicated JTAG pins enabled */ +//#define RESERVED (0x0040) /* SYS - Reserved */ +//#define RESERVED (0x0080) /* SYS - Reserved */ +//#define RESERVED (0x0100) /* SYS - Reserved */ +//#define RESERVED (0x0200) /* SYS - Reserved */ +//#define RESERVED (0x0400) /* SYS - Reserved */ +//#define RESERVED (0x0800) /* SYS - Reserved */ +//#define RESERVED (0x1000) /* SYS - Reserved */ +//#define RESERVED (0x2000) /* SYS - Reserved */ +//#define RESERVED (0x4000) /* SYS - Reserved */ +//#define RESERVED (0x8000) /* SYS - Reserved */ + +/* SYSCTL Control Bits */ +#define SYSRIVECT_L (0x0001) /* SYS - RAM based interrupt vectors */ +//#define RESERVED (0x0002) /* SYS - Reserved */ +#define SYSPMMPE_L (0x0004) /* SYS - PMM access protect */ +//#define RESERVED (0x0008) /* SYS - Reserved */ +#define SYSBSLIND_L (0x0010) /* SYS - TCK/RST indication detected */ +#define SYSJTAGPIN_L (0x0020) /* SYS - Dedicated JTAG pins enabled */ +//#define RESERVED (0x0040) /* SYS - Reserved */ +//#define RESERVED (0x0080) /* SYS - Reserved */ +//#define RESERVED (0x0100) /* SYS - Reserved */ +//#define RESERVED (0x0200) /* SYS - Reserved */ +//#define RESERVED (0x0400) /* SYS - Reserved */ +//#define RESERVED (0x0800) /* SYS - Reserved */ +//#define RESERVED (0x1000) /* SYS - Reserved */ +//#define RESERVED (0x2000) /* SYS - Reserved */ +//#define RESERVED (0x4000) /* SYS - Reserved */ +//#define RESERVED (0x8000) /* SYS - Reserved */ + +/* SYSJMBC Control Bits */ +#define JMBIN0FG (0x0001) /* SYS - Incoming JTAG Mailbox 0 Flag */ +#define JMBIN1FG (0x0002) /* SYS - Incoming JTAG Mailbox 1 Flag */ +#define JMBOUT0FG (0x0004) /* SYS - Outgoing JTAG Mailbox 0 Flag */ +#define JMBOUT1FG (0x0008) /* SYS - Outgoing JTAG Mailbox 1 Flag */ +#define JMBMODE (0x0010) /* SYS - JMB 16/32 Bit Mode */ +//#define RESERVED (0x0020) /* SYS - Reserved */ +#define JMBCLR0OFF (0x0040) /* SYS - Incoming JTAG Mailbox 0 Flag auto-clear disalbe */ +#define JMBCLR1OFF (0x0080) /* SYS - Incoming JTAG Mailbox 1 Flag auto-clear disalbe */ +//#define RESERVED (0x0100) /* SYS - Reserved */ +//#define RESERVED (0x0200) /* SYS - Reserved */ +//#define RESERVED (0x0400) /* SYS - Reserved */ +//#define RESERVED (0x0800) /* SYS - Reserved */ +//#define RESERVED (0x1000) /* SYS - Reserved */ +//#define RESERVED (0x2000) /* SYS - Reserved */ +//#define RESERVED (0x4000) /* SYS - Reserved */ +//#define RESERVED (0x8000) /* SYS - Reserved */ + +/* SYSJMBC Control Bits */ +#define JMBIN0FG_L (0x0001) /* SYS - Incoming JTAG Mailbox 0 Flag */ +#define JMBIN1FG_L (0x0002) /* SYS - Incoming JTAG Mailbox 1 Flag */ +#define JMBOUT0FG_L (0x0004) /* SYS - Outgoing JTAG Mailbox 0 Flag */ +#define JMBOUT1FG_L (0x0008) /* SYS - Outgoing JTAG Mailbox 1 Flag */ +#define JMBMODE_L (0x0010) /* SYS - JMB 16/32 Bit Mode */ +//#define RESERVED (0x0020) /* SYS - Reserved */ +#define JMBCLR0OFF_L (0x0040) /* SYS - Incoming JTAG Mailbox 0 Flag auto-clear disalbe */ +#define JMBCLR1OFF_L (0x0080) /* SYS - Incoming JTAG Mailbox 1 Flag auto-clear disalbe */ +//#define RESERVED (0x0100) /* SYS - Reserved */ +//#define RESERVED (0x0200) /* SYS - Reserved */ +//#define RESERVED (0x0400) /* SYS - Reserved */ +//#define RESERVED (0x0800) /* SYS - Reserved */ +//#define RESERVED (0x1000) /* SYS - Reserved */ +//#define RESERVED (0x2000) /* SYS - Reserved */ +//#define RESERVED (0x4000) /* SYS - Reserved */ +//#define RESERVED (0x8000) /* SYS - Reserved */ + + +/* SYSUNIV Definitions */ +#define SYSUNIV_NONE (0x0000) /* No Interrupt pending */ +#define SYSUNIV_NMIIFG (0x0002) /* SYSUNIV : NMIIFG */ +#define SYSUNIV_OFIFG (0x0004) /* SYSUNIV : Osc. Fail - OFIFG */ + +/* SYSSNIV Definitions */ +#define SYSSNIV_NONE (0x0000) /* No Interrupt pending */ +#define SYSSNIV_RES02 (0x0002) /* SYSSNIV : Reserved */ +#define SYSSNIV_UBDIFG (0x0004) /* SYSSNIV : FRAM Uncorrectable bit Error */ +#define SYSSNIV_RES06 (0x0006) /* SYSSNIV : Reserved */ +#define SYSSNIV_MPUSEGPIFG (0x0008) /* SYSSNIV : MPUSEGPIFG violation */ +#define SYSSNIV_MPUSEGIIFG (0x000A) /* SYSSNIV : MPUSEGIIFG violation */ +#define SYSSNIV_MPUSEG1IFG (0x000C) /* SYSSNIV : MPUSEG1IFG violation */ +#define SYSSNIV_MPUSEG2IFG (0x000E) /* SYSSNIV : MPUSEG2IFG violation */ +#define SYSSNIV_MPUSEG3IFG (0x0010) /* SYSSNIV : MPUSEG3IFG violation */ +#define SYSSNIV_VMAIFG (0x0012) /* SYSSNIV : VMAIFG */ +#define SYSSNIV_JMBINIFG (0x0014) /* SYSSNIV : JMBINIFG */ +#define SYSSNIV_JMBOUTIFG (0x0016) /* SYSSNIV : JMBOUTIFG */ +#define SYSSNIV_CBDIFG (0x0018) /* SYSSNIV : FRAM Correctable Bit error */ + +/* SYSRSTIV Definitions */ +#define SYSRSTIV_NONE (0x0000) /* No Interrupt pending */ +#define SYSRSTIV_BOR (0x0002) /* SYSRSTIV : BOR */ +#define SYSRSTIV_RSTNMI (0x0004) /* SYSRSTIV : RST/NMI */ +#define SYSRSTIV_DOBOR (0x0006) /* SYSRSTIV : Do BOR */ +#define SYSRSTIV_LPM5WU (0x0008) /* SYSRSTIV : Port LPM5 Wake Up */ +#define SYSRSTIV_SECYV (0x000A) /* SYSRSTIV : Security violation */ +#define SYSRSTIV_RES0C (0x000C) /* SYSRSTIV : Reserved */ +#define SYSRSTIV_SVSHIFG (0x000E) /* SYSRSTIV : SVSHIFG */ +#define SYSRSTIV_RES10 (0x0010) /* SYSRSTIV : Reserved */ +#define SYSRSTIV_RES12 (0x0012) /* SYSRSTIV : Reserved */ +#define SYSRSTIV_DOPOR (0x0014) /* SYSRSTIV : Do POR */ +#define SYSRSTIV_WDTTO (0x0016) /* SYSRSTIV : WDT Time out */ +#define SYSRSTIV_WDTKEY (0x0018) /* SYSRSTIV : WDTKEY violation */ +#define SYSRSTIV_FRCTLPW (0x001A) /* SYSRSTIV : FRAM Key violation */ +#define SYSRSTIV_UBDIFG (0x001C) /* SYSRSTIV : FRAM Uncorrectable bit Error */ +#define SYSRSTIV_PERF (0x001E) /* SYSRSTIV : peripheral/config area fetch */ +#define SYSRSTIV_PMMPW (0x0020) /* SYSRSTIV : PMM Password violation */ +#define SYSRSTIV_MPUPW (0x0022) /* SYSRSTIV : MPU Password violation */ +#define SYSRSTIV_CSPW (0x0024) /* SYSRSTIV : CS Password violation */ +#define SYSRSTIV_MPUSEGPIFG (0x0026) /* SYSRSTIV : MPUSEGPIFG violation */ +#define SYSRSTIV_MPUSEGIIFG (0x0028) /* SYSRSTIV : MPUSEGIIFG violation */ +#define SYSRSTIV_MPUSEG1IFG (0x002A) /* SYSRSTIV : MPUSEG1IFG violation */ +#define SYSRSTIV_MPUSEG2IFG (0x002C) /* SYSRSTIV : MPUSEG2IFG violation */ +#define SYSRSTIV_MPUSEG3IFG (0x002E) /* SYSRSTIV : MPUSEG3IFG violation */ +#define SYSRSTIV_ACCTEIFG (0x0030) /* SYSRSTIV : ACCTEIFG access time error */ + +/************************************************************ +* Timer0_A3 +************************************************************/ +#define __MSP430_HAS_T0A3__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_T0A3__ 0x0340 +#define TIMER_A0_BASE __MSP430_BASEADDRESS_T0A3__ + +sfr_w(TA0CTL); /* Timer0_A3 Control */ +sfr_w(TA0CCTL0); /* Timer0_A3 Capture/Compare Control 0 */ +sfr_w(TA0CCTL1); /* Timer0_A3 Capture/Compare Control 1 */ +sfr_w(TA0CCTL2); /* Timer0_A3 Capture/Compare Control 2 */ +sfr_w(TA0R); /* Timer0_A3 */ +sfr_w(TA0CCR0); /* Timer0_A3 Capture/Compare 0 */ +sfr_w(TA0CCR1); /* Timer0_A3 Capture/Compare 1 */ +sfr_w(TA0CCR2); /* Timer0_A3 Capture/Compare 2 */ +sfr_w(TA0IV); /* Timer0_A3 Interrupt Vector Word */ +sfr_w(TA0EX0); /* Timer0_A3 Expansion Register 0 */ + +/* TAxCTL Control Bits */ +#define TASSEL1 (0x0200) /* Timer A clock source select 1 */ +#define TASSEL0 (0x0100) /* Timer A clock source select 0 */ +#define ID1 (0x0080) /* Timer A clock input divider 1 */ +#define ID0 (0x0040) /* Timer A clock input divider 0 */ +#define MC1 (0x0020) /* Timer A mode control 1 */ +#define MC0 (0x0010) /* Timer A mode control 0 */ +#define TACLR (0x0004) /* Timer A counter clear */ +#define TAIE (0x0002) /* Timer A counter interrupt enable */ +#define TAIFG (0x0001) /* Timer A counter interrupt flag */ + +#define MC_0 (0x0000) /* Timer A mode control: 0 - Stop */ +#define MC_1 (0x0010) /* Timer A mode control: 1 - Up to CCR0 */ +#define MC_2 (0x0020) /* Timer A mode control: 2 - Continuous up */ +#define MC_3 (0x0030) /* Timer A mode control: 3 - Up/Down */ +#define ID_0 (0x0000) /* Timer A input divider: 0 - /1 */ +#define ID_1 (0x0040) /* Timer A input divider: 1 - /2 */ +#define ID_2 (0x0080) /* Timer A input divider: 2 - /4 */ +#define ID_3 (0x00C0) /* Timer A input divider: 3 - /8 */ +#define TASSEL_0 (0x0000) /* Timer A clock source select: 0 - TACLK */ +#define TASSEL_1 (0x0100) /* Timer A clock source select: 1 - ACLK */ +#define TASSEL_2 (0x0200) /* Timer A clock source select: 2 - SMCLK */ +#define TASSEL_3 (0x0300) /* Timer A clock source select: 3 - INCLK */ +#define MC__STOP (0x0000) /* Timer A mode control: 0 - Stop */ +#define MC__UP (0x0010) /* Timer A mode control: 1 - Up to CCR0 */ +#define MC__CONTINUOUS (0x0020) /* Timer A mode control: 2 - Continuous up */ +#define MC__CONTINOUS (0x0020) /* Legacy define */ +#define MC__UPDOWN (0x0030) /* Timer A mode control: 3 - Up/Down */ +#define ID__1 (0x0000) /* Timer A input divider: 0 - /1 */ +#define ID__2 (0x0040) /* Timer A input divider: 1 - /2 */ +#define ID__4 (0x0080) /* Timer A input divider: 2 - /4 */ +#define ID__8 (0x00C0) /* Timer A input divider: 3 - /8 */ +#define TASSEL__TACLK (0x0000) /* Timer A clock source select: 0 - TACLK */ +#define TASSEL__ACLK (0x0100) /* Timer A clock source select: 1 - ACLK */ +#define TASSEL__SMCLK (0x0200) /* Timer A clock source select: 2 - SMCLK */ +#define TASSEL__INCLK (0x0300) /* Timer A clock source select: 3 - INCLK */ + +/* TAxCCTLx Control Bits */ +#define CM1 (0x8000) /* Capture mode 1 */ +#define CM0 (0x4000) /* Capture mode 0 */ +#define CCIS1 (0x2000) /* Capture input select 1 */ +#define CCIS0 (0x1000) /* Capture input select 0 */ +#define SCS (0x0800) /* Capture sychronize */ +#define SCCI (0x0400) /* Latched capture signal (read) */ +#define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */ +#define OUTMOD2 (0x0080) /* Output mode 2 */ +#define OUTMOD1 (0x0040) /* Output mode 1 */ +#define OUTMOD0 (0x0020) /* Output mode 0 */ +#define CCIE (0x0010) /* Capture/compare interrupt enable */ +#define CCI (0x0008) /* Capture input signal (read) */ +#define OUT (0x0004) /* PWM Output signal if output mode 0 */ +#define COV (0x0002) /* Capture/compare overflow flag */ +#define CCIFG (0x0001) /* Capture/compare interrupt flag */ + +#define OUTMOD_0 (0x0000) /* PWM output mode: 0 - output only */ +#define OUTMOD_1 (0x0020) /* PWM output mode: 1 - set */ +#define OUTMOD_2 (0x0040) /* PWM output mode: 2 - PWM toggle/reset */ +#define OUTMOD_3 (0x0060) /* PWM output mode: 3 - PWM set/reset */ +#define OUTMOD_4 (0x0080) /* PWM output mode: 4 - toggle */ +#define OUTMOD_5 (0x00A0) /* PWM output mode: 5 - Reset */ +#define OUTMOD_6 (0x00C0) /* PWM output mode: 6 - PWM toggle/set */ +#define OUTMOD_7 (0x00E0) /* PWM output mode: 7 - PWM reset/set */ +#define CCIS_0 (0x0000) /* Capture input select: 0 - CCIxA */ +#define CCIS_1 (0x1000) /* Capture input select: 1 - CCIxB */ +#define CCIS_2 (0x2000) /* Capture input select: 2 - GND */ +#define CCIS_3 (0x3000) /* Capture input select: 3 - Vcc */ +#define CM_0 (0x0000) /* Capture mode: 0 - disabled */ +#define CM_1 (0x4000) /* Capture mode: 1 - pos. edge */ +#define CM_2 (0x8000) /* Capture mode: 1 - neg. edge */ +#define CM_3 (0xC000) /* Capture mode: 1 - both edges */ + +/* TAxEX0 Control Bits */ +#define TAIDEX0 (0x0001) /* Timer A Input divider expansion Bit: 0 */ +#define TAIDEX1 (0x0002) /* Timer A Input divider expansion Bit: 1 */ +#define TAIDEX2 (0x0004) /* Timer A Input divider expansion Bit: 2 */ + +#define TAIDEX_0 (0x0000) /* Timer A Input divider expansion : /1 */ +#define TAIDEX_1 (0x0001) /* Timer A Input divider expansion : /2 */ +#define TAIDEX_2 (0x0002) /* Timer A Input divider expansion : /3 */ +#define TAIDEX_3 (0x0003) /* Timer A Input divider expansion : /4 */ +#define TAIDEX_4 (0x0004) /* Timer A Input divider expansion : /5 */ +#define TAIDEX_5 (0x0005) /* Timer A Input divider expansion : /6 */ +#define TAIDEX_6 (0x0006) /* Timer A Input divider expansion : /7 */ +#define TAIDEX_7 (0x0007) /* Timer A Input divider expansion : /8 */ + +/* T0A3IV Definitions */ +#define TA0IV_NONE (0x0000) /* No Interrupt pending */ +#define TA0IV_TACCR1 (0x0002) /* TA0CCR1_CCIFG */ +#define TA0IV_TACCR2 (0x0004) /* TA0CCR2_CCIFG */ +#define TA0IV_3 (0x0006) /* Reserved */ +#define TA0IV_4 (0x0008) /* Reserved */ +#define TA0IV_5 (0x000A) /* Reserved */ +#define TA0IV_6 (0x000C) /* Reserved */ +#define TA0IV_TAIFG (0x000E) /* TA0IFG */ + +/* Legacy Defines */ +#define TA0IV_TA0CCR1 (0x0002) /* TA0CCR1_CCIFG */ +#define TA0IV_TA0CCR2 (0x0004) /* TA0CCR2_CCIFG */ +#define TA0IV_TA0IFG (0x000E) /* TA0IFG */ + +/************************************************************ +* Timer1_A3 +************************************************************/ +#define __MSP430_HAS_T1A3__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_T1A3__ 0x0380 +#define TIMER_A1_BASE __MSP430_BASEADDRESS_T1A3__ + +sfr_w(TA1CTL); /* Timer1_A3 Control */ +sfr_w(TA1CCTL0); /* Timer1_A3 Capture/Compare Control 0 */ +sfr_w(TA1CCTL1); /* Timer1_A3 Capture/Compare Control 1 */ +sfr_w(TA1CCTL2); /* Timer1_A3 Capture/Compare Control 2 */ +sfr_w(TA1R); /* Timer1_A3 */ +sfr_w(TA1CCR0); /* Timer1_A3 Capture/Compare 0 */ +sfr_w(TA1CCR1); /* Timer1_A3 Capture/Compare 1 */ +sfr_w(TA1CCR2); /* Timer1_A3 Capture/Compare 2 */ +sfr_w(TA1IV); /* Timer1_A3 Interrupt Vector Word */ +sfr_w(TA1EX0); /* Timer1_A3 Expansion Register 0 */ + +/* Bits are already defined within the Timer0_Ax */ + +/* TA1IV Definitions */ +#define TA1IV_NONE (0x0000) /* No Interrupt pending */ +#define TA1IV_TACCR1 (0x0002) /* TA1CCR1_CCIFG */ +#define TA1IV_TACCR2 (0x0004) /* TA1CCR2_CCIFG */ +#define TA1IV_3 (0x0006) /* Reserved */ +#define TA1IV_4 (0x0008) /* Reserved */ +#define TA1IV_5 (0x000A) /* Reserved */ +#define TA1IV_6 (0x000C) /* Reserved */ +#define TA1IV_TAIFG (0x000E) /* TA1IFG */ + +/* Legacy Defines */ +#define TA1IV_TA1CCR1 (0x0002) /* TA1CCR1_CCIFG */ +#define TA1IV_TA1CCR2 (0x0004) /* TA1CCR2_CCIFG */ +#define TA1IV_TA1IFG (0x000E) /* TA1IFG */ + +/************************************************************ +* Timer2_A2 +************************************************************/ +#define __MSP430_HAS_T2A2__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_T2A2__ 0x0400 +#define TIMER_A2_BASE __MSP430_BASEADDRESS_T2A2__ + +sfr_w(TA2CTL); /* Timer2_A2 Control */ +sfr_w(TA2CCTL0); /* Timer2_A2 Capture/Compare Control 0 */ +sfr_w(TA2CCTL1); /* Timer2_A2 Capture/Compare Control 1 */ +sfr_w(TA2R); /* Timer2_A2 */ +sfr_w(TA2CCR0); /* Timer2_A2 Capture/Compare 0 */ +sfr_w(TA2CCR1); /* Timer2_A2 Capture/Compare 1 */ +sfr_w(TA2IV); /* Timer2_A2 Interrupt Vector Word */ +sfr_w(TA2EX0); /* Timer2_A2 Expansion Register 0 */ + +/* Bits are already defined within the Timer0_Ax */ + +/* TA2IV Definitions */ +#define TA2IV_NONE (0x0000) /* No Interrupt pending */ +#define TA2IV_TACCR1 (0x0002) /* TA2CCR1_CCIFG */ +#define TA2IV_3 (0x0006) /* Reserved */ +#define TA2IV_4 (0x0008) /* Reserved */ +#define TA2IV_5 (0x000A) /* Reserved */ +#define TA2IV_6 (0x000C) /* Reserved */ +#define TA2IV_TAIFG (0x000E) /* TA2IFG */ + +/* Legacy Defines */ +#define TA2IV_TA2CCR1 (0x0002) /* TA2CCR1_CCIFG */ +#define TA2IV_TA2IFG (0x000E) /* TA2IFG */ + +/************************************************************ +* Timer3_A5 +************************************************************/ +#define __MSP430_HAS_T3A5__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_T3A5__ 0x0440 +#define TIMER_A3_BASE __MSP430_BASEADDRESS_T3A5__ + +sfr_w(TA3CTL); /* Timer3_A5 Control */ +sfr_w(TA3CCTL0); /* Timer3_A5 Capture/Compare Control 0 */ +sfr_w(TA3CCTL1); /* Timer3_A5 Capture/Compare Control 1 */ +sfr_w(TA3CCTL2); /* Timer3_A5 Capture/Compare Control 2 */ +sfr_w(TA3CCTL3); /* Timer3_A5 Capture/Compare Control 3 */ +sfr_w(TA3CCTL4); /* Timer3_A5 Capture/Compare Control 4 */ +sfr_w(TA3R); /* Timer3_A5 */ +sfr_w(TA3CCR0); /* Timer3_A5 Capture/Compare 0 */ +sfr_w(TA3CCR1); /* Timer3_A5 Capture/Compare 1 */ +sfr_w(TA3CCR2); /* Timer3_A5 Capture/Compare 2 */ +sfr_w(TA3CCR3); /* Timer3_A5 Capture/Compare 3 */ +sfr_w(TA3CCR4); /* Timer3_A5 Capture/Compare 4 */ +sfr_w(TA3IV); /* Timer3_A5 Interrupt Vector Word */ +sfr_w(TA3EX0); /* Timer3_A5 Expansion Register 0 */ + +/* Bits are already defined within the Timer0_Ax */ + +/* TA3IV Definitions */ +#define TA3IV_NONE (0x0000) /* No Interrupt pending */ +#define TA3IV_TACCR1 (0x0002) /* TA3CCR1_CCIFG */ +#define TA3IV_TACCR2 (0x0004) /* TA3CCR2_CCIFG */ +#define TA3IV_TACCR3 (0x0006) /* TA3CCR3_CCIFG */ +#define TA3IV_TACCR4 (0x0008) /* TA3CCR4_CCIFG */ +#define TA3IV_TAIFG (0x000E) /* TA3IFG */ + +/* Legacy Defines */ +#define TA3IV_TA3CCR1 (0x0002) /* TA3CCR1_CCIFG */ +#define TA3IV_TA3CCR2 (0x0004) /* TA3CCR2_CCIFG */ +#define TA3IV_TA3CCR3 (0x0006) /* TA3CCR3_CCIFG */ +#define TA3IV_TA3CCR4 (0x0008) /* TA3CCR4_CCIFG */ +#define TA3IV_TA3IFG (0x000E) /* TA3IFG */ + +/************************************************************ +* Timer0_B7 +************************************************************/ +#define __MSP430_HAS_T0B7__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_T0B7__ 0x03C0 +#define TIMER_B0_BASE __MSP430_BASEADDRESS_T0B7__ + +sfr_w(TB0CTL); /* Timer0_B7 Control */ +sfr_w(TB0CCTL0); /* Timer0_B7 Capture/Compare Control 0 */ +sfr_w(TB0CCTL1); /* Timer0_B7 Capture/Compare Control 1 */ +sfr_w(TB0CCTL2); /* Timer0_B7 Capture/Compare Control 2 */ +sfr_w(TB0CCTL3); /* Timer0_B7 Capture/Compare Control 3 */ +sfr_w(TB0CCTL4); /* Timer0_B7 Capture/Compare Control 4 */ +sfr_w(TB0CCTL5); /* Timer0_B7 Capture/Compare Control 5 */ +sfr_w(TB0CCTL6); /* Timer0_B7 Capture/Compare Control 6 */ +sfr_w(TB0R); /* Timer0_B7 */ +sfr_w(TB0CCR0); /* Timer0_B7 Capture/Compare 0 */ +sfr_w(TB0CCR1); /* Timer0_B7 Capture/Compare 1 */ +sfr_w(TB0CCR2); /* Timer0_B7 Capture/Compare 2 */ +sfr_w(TB0CCR3); /* Timer0_B7 Capture/Compare 3 */ +sfr_w(TB0CCR4); /* Timer0_B7 Capture/Compare 4 */ +sfr_w(TB0CCR5); /* Timer0_B7 Capture/Compare 5 */ +sfr_w(TB0CCR6); /* Timer0_B7 Capture/Compare 6 */ +sfr_w(TB0EX0); /* Timer0_B7 Expansion Register 0 */ +sfr_w(TB0IV); /* Timer0_B7 Interrupt Vector Word */ + +/* Legacy Type Definitions for TimerB */ +#define TBCTL TB0CTL /* Timer0_B7 Control */ +#define TBCCTL0 TB0CCTL0 /* Timer0_B7 Capture/Compare Control 0 */ +#define TBCCTL1 TB0CCTL1 /* Timer0_B7 Capture/Compare Control 1 */ +#define TBCCTL2 TB0CCTL2 /* Timer0_B7 Capture/Compare Control 2 */ +#define TBCCTL3 TB0CCTL3 /* Timer0_B7 Capture/Compare Control 3 */ +#define TBCCTL4 TB0CCTL4 /* Timer0_B7 Capture/Compare Control 4 */ +#define TBCCTL5 TB0CCTL5 /* Timer0_B7 Capture/Compare Control 5 */ +#define TBCCTL6 TB0CCTL6 /* Timer0_B7 Capture/Compare Control 6 */ +#define TBR TB0R /* Timer0_B7 */ +#define TBCCR0 TB0CCR0 /* Timer0_B7 Capture/Compare 0 */ +#define TBCCR1 TB0CCR1 /* Timer0_B7 Capture/Compare 1 */ +#define TBCCR2 TB0CCR2 /* Timer0_B7 Capture/Compare 2 */ +#define TBCCR3 TB0CCR3 /* Timer0_B7 Capture/Compare 3 */ +#define TBCCR4 TB0CCR4 /* Timer0_B7 Capture/Compare 4 */ +#define TBCCR5 TB0CCR5 /* Timer0_B7 Capture/Compare 5 */ +#define TBCCR6 TB0CCR6 /* Timer0_B7 Capture/Compare 6 */ +#define TBEX0 TB0EX0 /* Timer0_B7 Expansion Register 0 */ +#define TBIV TB0IV /* Timer0_B7 Interrupt Vector Word */ +#define TIMERB1_VECTOR TIMER0_B1_VECTOR /* Timer0_B7 CC1-6, TB */ +#define TIMERB0_VECTOR TIMER0_B0_VECTOR /* Timer0_B7 CC0 */ + +/* TBxCTL Control Bits */ +#define TBCLGRP1 (0x4000) /* Timer0_B7 Compare latch load group 1 */ +#define TBCLGRP0 (0x2000) /* Timer0_B7 Compare latch load group 0 */ +#define CNTL1 (0x1000) /* Counter lenght 1 */ +#define CNTL0 (0x0800) /* Counter lenght 0 */ +#define TBSSEL1 (0x0200) /* Clock source 1 */ +#define TBSSEL0 (0x0100) /* Clock source 0 */ +#define TBCLR (0x0004) /* Timer0_B7 counter clear */ +#define TBIE (0x0002) /* Timer0_B7 interrupt enable */ +#define TBIFG (0x0001) /* Timer0_B7 interrupt flag */ + +#define SHR1 (0x4000) /* Timer0_B7 Compare latch load group 1 */ +#define SHR0 (0x2000) /* Timer0_B7 Compare latch load group 0 */ + +#define TBSSEL_0 (0x0000) /* Clock Source: TBCLK */ +#define TBSSEL_1 (0x0100) /* Clock Source: ACLK */ +#define TBSSEL_2 (0x0200) /* Clock Source: SMCLK */ +#define TBSSEL_3 (0x0300) /* Clock Source: INCLK */ +#define CNTL_0 (0x0000) /* Counter lenght: 16 bit */ +#define CNTL_1 (0x0800) /* Counter lenght: 12 bit */ +#define CNTL_2 (0x1000) /* Counter lenght: 10 bit */ +#define CNTL_3 (0x1800) /* Counter lenght: 8 bit */ +#define SHR_0 (0x0000) /* Timer0_B7 Group: 0 - individually */ +#define SHR_1 (0x2000) /* Timer0_B7 Group: 1 - 3 groups (1-2, 3-4, 5-6) */ +#define SHR_2 (0x4000) /* Timer0_B7 Group: 2 - 2 groups (1-3, 4-6)*/ +#define SHR_3 (0x6000) /* Timer0_B7 Group: 3 - 1 group (all) */ +#define TBCLGRP_0 (0x0000) /* Timer0_B7 Group: 0 - individually */ +#define TBCLGRP_1 (0x2000) /* Timer0_B7 Group: 1 - 3 groups (1-2, 3-4, 5-6) */ +#define TBCLGRP_2 (0x4000) /* Timer0_B7 Group: 2 - 2 groups (1-3, 4-6)*/ +#define TBCLGRP_3 (0x6000) /* Timer0_B7 Group: 3 - 1 group (all) */ +#define TBSSEL__TBCLK (0x0000) /* Timer0_B7 clock source select: 0 - TBCLK */ +#define TBSSEL__TACLK (0x0000) /* Timer0_B7 clock source select: 0 - TBCLK (legacy) */ +#define TBSSEL__ACLK (0x0100) /* Timer0_B7 clock source select: 1 - ACLK */ +#define TBSSEL__SMCLK (0x0200) /* Timer0_B7 clock source select: 2 - SMCLK */ +#define TBSSEL__INCLK (0x0300) /* Timer0_B7 clock source select: 3 - INCLK */ +#define CNTL__16 (0x0000) /* Counter lenght: 16 bit */ +#define CNTL__12 (0x0800) /* Counter lenght: 12 bit */ +#define CNTL__10 (0x1000) /* Counter lenght: 10 bit */ +#define CNTL__8 (0x1800) /* Counter lenght: 8 bit */ + +/* Additional Timer B Control Register bits are defined in Timer A */ +/* TBxCCTLx Control Bits */ +#define CLLD1 (0x0400) /* Compare latch load source 1 */ +#define CLLD0 (0x0200) /* Compare latch load source 0 */ + +#define SLSHR1 (0x0400) /* Compare latch load source 1 */ +#define SLSHR0 (0x0200) /* Compare latch load source 0 */ + +#define SLSHR_0 (0x0000) /* Compare latch load sourec : 0 - immediate */ +#define SLSHR_1 (0x0200) /* Compare latch load sourec : 1 - TBR counts to 0 */ +#define SLSHR_2 (0x0400) /* Compare latch load sourec : 2 - up/down */ +#define SLSHR_3 (0x0600) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */ + +#define CLLD_0 (0x0000) /* Compare latch load sourec : 0 - immediate */ +#define CLLD_1 (0x0200) /* Compare latch load sourec : 1 - TBR counts to 0 */ +#define CLLD_2 (0x0400) /* Compare latch load sourec : 2 - up/down */ +#define CLLD_3 (0x0600) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */ + +/* TBxEX0 Control Bits */ +#define TBIDEX0 (0x0001) /* Timer0_B7 Input divider expansion Bit: 0 */ +#define TBIDEX1 (0x0002) /* Timer0_B7 Input divider expansion Bit: 1 */ +#define TBIDEX2 (0x0004) /* Timer0_B7 Input divider expansion Bit: 2 */ + +#define TBIDEX_0 (0x0000) /* Timer0_B7 Input divider expansion : /1 */ +#define TBIDEX_1 (0x0001) /* Timer0_B7 Input divider expansion : /2 */ +#define TBIDEX_2 (0x0002) /* Timer0_B7 Input divider expansion : /3 */ +#define TBIDEX_3 (0x0003) /* Timer0_B7 Input divider expansion : /4 */ +#define TBIDEX_4 (0x0004) /* Timer0_B7 Input divider expansion : /5 */ +#define TBIDEX_5 (0x0005) /* Timer0_B7 Input divider expansion : /6 */ +#define TBIDEX_6 (0x0006) /* Timer0_B7 Input divider expansion : /7 */ +#define TBIDEX_7 (0x0007) /* Timer0_B7 Input divider expansion : /8 */ +#define TBIDEX__1 (0x0000) /* Timer0_B7 Input divider expansion : /1 */ +#define TBIDEX__2 (0x0001) /* Timer0_B7 Input divider expansion : /2 */ +#define TBIDEX__3 (0x0002) /* Timer0_B7 Input divider expansion : /3 */ +#define TBIDEX__4 (0x0003) /* Timer0_B7 Input divider expansion : /4 */ +#define TBIDEX__5 (0x0004) /* Timer0_B7 Input divider expansion : /5 */ +#define TBIDEX__6 (0x0005) /* Timer0_B7 Input divider expansion : /6 */ +#define TBIDEX__7 (0x0006) /* Timer0_B7 Input divider expansion : /7 */ +#define TBIDEX__8 (0x0007) /* Timer0_B7 Input divider expansion : /8 */ + +/* TB0IV Definitions */ +#define TB0IV_NONE (0x0000) /* No Interrupt pending */ +#define TB0IV_TBCCR1 (0x0002) /* TB0CCR1_CCIFG */ +#define TB0IV_TBCCR2 (0x0004) /* TB0CCR2_CCIFG */ +#define TB0IV_TBCCR3 (0x0006) /* TB0CCR3_CCIFG */ +#define TB0IV_TBCCR4 (0x0008) /* TB0CCR4_CCIFG */ +#define TB0IV_TBCCR5 (0x000A) /* TB0CCR5_CCIFG */ +#define TB0IV_TBCCR6 (0x000C) /* TB0CCR6_CCIFG */ +#define TB0IV_TBIFG (0x000E) /* TB0IFG */ + +/* Legacy Defines */ +#define TB0IV_TB0CCR1 (0x0002) /* TB0CCR1_CCIFG */ +#define TB0IV_TB0CCR2 (0x0004) /* TB0CCR2_CCIFG */ +#define TB0IV_TB0CCR3 (0x0006) /* TB0CCR3_CCIFG */ +#define TB0IV_TB0CCR4 (0x0008) /* TB0CCR4_CCIFG */ +#define TB0IV_TB0CCR5 (0x000A) /* TB0CCR5_CCIFG */ +#define TB0IV_TB0CCR6 (0x000C) /* TB0CCR6_CCIFG */ +#define TB0IV_TB0IFG (0x000E) /* TB0IFG */ + + +/************************************************************ +* USCI A0 +************************************************************/ +#define __MSP430_HAS_EUSCI_A0__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_EUSCI_A0__ 0x05C0 +#define EUSCI_A0_BASE __MSP430_BASEADDRESS_EUSCI_A0__ + +sfr_w(UCA0CTLW0); /* USCI A0 Control Word Register 0 */ +sfr_b(UCA0CTLW0_L); /* USCI A0 Control Word Register 0 */ +sfr_b(UCA0CTLW0_H); /* USCI A0 Control Word Register 0 */ +#define UCA0CTL1 UCA0CTLW0_L /* USCI A0 Control Register 1 */ +#define UCA0CTL0 UCA0CTLW0_H /* USCI A0 Control Register 0 */ +sfr_w(UCA0CTLW1); /* USCI A0 Control Word Register 1 */ +sfr_b(UCA0CTLW1_L); /* USCI A0 Control Word Register 1 */ +sfr_b(UCA0CTLW1_H); /* USCI A0 Control Word Register 1 */ +sfr_w(UCA0BRW); /* USCI A0 Baud Word Rate 0 */ +sfr_b(UCA0BRW_L); /* USCI A0 Baud Word Rate 0 */ +sfr_b(UCA0BRW_H); /* USCI A0 Baud Word Rate 0 */ +#define UCA0BR0 UCA0BRW_L /* USCI A0 Baud Rate 0 */ +#define UCA0BR1 UCA0BRW_H /* USCI A0 Baud Rate 1 */ +sfr_w(UCA0MCTLW); /* USCI A0 Modulation Control */ +sfr_b(UCA0MCTLW_L); /* USCI A0 Modulation Control */ +sfr_b(UCA0MCTLW_H); /* USCI A0 Modulation Control */ +sfr_b(UCA0STATW); /* USCI A0 Status Register */ +sfr_w(UCA0RXBUF); /* USCI A0 Receive Buffer */ +sfr_b(UCA0RXBUF_L); /* USCI A0 Receive Buffer */ +sfr_b(UCA0RXBUF_H); /* USCI A0 Receive Buffer */ +sfr_w(UCA0TXBUF); /* USCI A0 Transmit Buffer */ +sfr_b(UCA0TXBUF_L); /* USCI A0 Transmit Buffer */ +sfr_b(UCA0TXBUF_H); /* USCI A0 Transmit Buffer */ +sfr_b(UCA0ABCTL); /* USCI A0 LIN Control */ +sfr_w(UCA0IRCTL); /* USCI A0 IrDA Transmit Control */ +sfr_b(UCA0IRCTL_L); /* USCI A0 IrDA Transmit Control */ +sfr_b(UCA0IRCTL_H); /* USCI A0 IrDA Transmit Control */ +#define UCA0IRTCTL UCA0IRCTL_L /* USCI A0 IrDA Transmit Control */ +#define UCA0IRRCTL UCA0IRCTL_H /* USCI A0 IrDA Receive Control */ +sfr_w(UCA0IE); /* USCI A0 Interrupt Enable Register */ +sfr_b(UCA0IE_L); /* USCI A0 Interrupt Enable Register */ +sfr_b(UCA0IE_H); /* USCI A0 Interrupt Enable Register */ +sfr_w(UCA0IFG); /* USCI A0 Interrupt Flags Register */ +sfr_b(UCA0IFG_L); /* USCI A0 Interrupt Flags Register */ +sfr_b(UCA0IFG_H); /* USCI A0 Interrupt Flags Register */ +sfr_w(UCA0IV); /* USCI A0 Interrupt Vector Register */ + + +/************************************************************ +* USCI A1 +************************************************************/ +#define __MSP430_HAS_EUSCI_A1__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_EUSCI_A1__ 0x05E0 +#define EUSCI_A1_BASE __MSP430_BASEADDRESS_EUSCI_A1__ + +sfr_w(UCA1CTLW0); /* USCI A1 Control Word Register 0 */ +sfr_b(UCA1CTLW0_L); /* USCI A1 Control Word Register 0 */ +sfr_b(UCA1CTLW0_H); /* USCI A1 Control Word Register 0 */ +#define UCA1CTL1 UCA1CTLW0_L /* USCI A1 Control Register 1 */ +#define UCA1CTL0 UCA1CTLW0_H /* USCI A1 Control Register 0 */ +sfr_w(UCA1CTLW1); /* USCI A1 Control Word Register 1 */ +sfr_b(UCA1CTLW1_L); /* USCI A1 Control Word Register 1 */ +sfr_b(UCA1CTLW1_H); /* USCI A1 Control Word Register 1 */ +sfr_w(UCA1BRW); /* USCI A1 Baud Word Rate 0 */ +sfr_b(UCA1BRW_L); /* USCI A1 Baud Word Rate 0 */ +sfr_b(UCA1BRW_H); /* USCI A1 Baud Word Rate 0 */ +#define UCA1BR0 UCA1BRW_L /* USCI A1 Baud Rate 0 */ +#define UCA1BR1 UCA1BRW_H /* USCI A1 Baud Rate 1 */ +sfr_w(UCA1MCTLW); /* USCI A1 Modulation Control */ +sfr_b(UCA1MCTLW_L); /* USCI A1 Modulation Control */ +sfr_b(UCA1MCTLW_H); /* USCI A1 Modulation Control */ +sfr_b(UCA1STATW); /* USCI A1 Status Register */ +sfr_w(UCA1RXBUF); /* USCI A1 Receive Buffer */ +sfr_b(UCA1RXBUF_L); /* USCI A1 Receive Buffer */ +sfr_b(UCA1RXBUF_H); /* USCI A1 Receive Buffer */ +sfr_w(UCA1TXBUF); /* USCI A1 Transmit Buffer */ +sfr_b(UCA1TXBUF_L); /* USCI A1 Transmit Buffer */ +sfr_b(UCA1TXBUF_H); /* USCI A1 Transmit Buffer */ +sfr_b(UCA1ABCTL); /* USCI A1 LIN Control */ +sfr_w(UCA1IRCTL); /* USCI A1 IrDA Transmit Control */ +sfr_b(UCA1IRCTL_L); /* USCI A1 IrDA Transmit Control */ +sfr_b(UCA1IRCTL_H); /* USCI A1 IrDA Transmit Control */ +#define UCA1IRTCTL UCA1IRCTL_L /* USCI A1 IrDA Transmit Control */ +#define UCA1IRRCTL UCA1IRCTL_H /* USCI A1 IrDA Receive Control */ +sfr_w(UCA1IE); /* USCI A1 Interrupt Enable Register */ +sfr_b(UCA1IE_L); /* USCI A1 Interrupt Enable Register */ +sfr_b(UCA1IE_H); /* USCI A1 Interrupt Enable Register */ +sfr_w(UCA1IFG); /* USCI A1 Interrupt Flags Register */ +sfr_b(UCA1IFG_L); /* USCI A1 Interrupt Flags Register */ +sfr_b(UCA1IFG_H); /* USCI A1 Interrupt Flags Register */ +sfr_w(UCA1IV); /* USCI A1 Interrupt Vector Register */ + + +/************************************************************ +* USCI B0 +************************************************************/ +#define __MSP430_HAS_EUSCI_B0__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_EUSCI_B0__ 0x0640 +#define EUSCI_B0_BASE __MSP430_BASEADDRESS_EUSCI_B0__ + + +sfr_w(UCB0CTLW0); /* USCI B0 Control Word Register 0 */ +sfr_b(UCB0CTLW0_L); /* USCI B0 Control Word Register 0 */ +sfr_b(UCB0CTLW0_H); /* USCI B0 Control Word Register 0 */ +#define UCB0CTL1 UCB0CTLW0_L /* USCI B0 Control Register 1 */ +#define UCB0CTL0 UCB0CTLW0_H /* USCI B0 Control Register 0 */ +sfr_w(UCB0CTLW1); /* USCI B0 Control Word Register 1 */ +sfr_b(UCB0CTLW1_L); /* USCI B0 Control Word Register 1 */ +sfr_b(UCB0CTLW1_H); /* USCI B0 Control Word Register 1 */ +sfr_w(UCB0BRW); /* USCI B0 Baud Word Rate 0 */ +sfr_b(UCB0BRW_L); /* USCI B0 Baud Word Rate 0 */ +sfr_b(UCB0BRW_H); /* USCI B0 Baud Word Rate 0 */ +#define UCB0BR0 UCB0BRW_L /* USCI B0 Baud Rate 0 */ +#define UCB0BR1 UCB0BRW_H /* USCI B0 Baud Rate 1 */ +sfr_w(UCB0STATW); /* USCI B0 Status Word Register */ +sfr_b(UCB0STATW_L); /* USCI B0 Status Word Register */ +sfr_b(UCB0STATW_H); /* USCI B0 Status Word Register */ +#define UCB0STAT UCB0STATW_L /* USCI B0 Status Register */ +#define UCB0BCNT UCB0STATW_H /* USCI B0 Byte Counter Register */ +sfr_w(UCB0TBCNT); /* USCI B0 Byte Counter Threshold Register */ +sfr_b(UCB0TBCNT_L); /* USCI B0 Byte Counter Threshold Register */ +sfr_b(UCB0TBCNT_H); /* USCI B0 Byte Counter Threshold Register */ +sfr_w(UCB0RXBUF); /* USCI B0 Receive Buffer */ +sfr_b(UCB0RXBUF_L); /* USCI B0 Receive Buffer */ +sfr_b(UCB0RXBUF_H); /* USCI B0 Receive Buffer */ +sfr_w(UCB0TXBUF); /* USCI B0 Transmit Buffer */ +sfr_b(UCB0TXBUF_L); /* USCI B0 Transmit Buffer */ +sfr_b(UCB0TXBUF_H); /* USCI B0 Transmit Buffer */ +sfr_w(UCB0I2COA0); /* USCI B0 I2C Own Address 0 */ +sfr_b(UCB0I2COA0_L); /* USCI B0 I2C Own Address 0 */ +sfr_b(UCB0I2COA0_H); /* USCI B0 I2C Own Address 0 */ +sfr_w(UCB0I2COA1); /* USCI B0 I2C Own Address 1 */ +sfr_b(UCB0I2COA1_L); /* USCI B0 I2C Own Address 1 */ +sfr_b(UCB0I2COA1_H); /* USCI B0 I2C Own Address 1 */ +sfr_w(UCB0I2COA2); /* USCI B0 I2C Own Address 2 */ +sfr_b(UCB0I2COA2_L); /* USCI B0 I2C Own Address 2 */ +sfr_b(UCB0I2COA2_H); /* USCI B0 I2C Own Address 2 */ +sfr_w(UCB0I2COA3); /* USCI B0 I2C Own Address 3 */ +sfr_b(UCB0I2COA3_L); /* USCI B0 I2C Own Address 3 */ +sfr_b(UCB0I2COA3_H); /* USCI B0 I2C Own Address 3 */ +sfr_w(UCB0ADDRX); /* USCI B0 Received Address Register */ +sfr_b(UCB0ADDRX_L); /* USCI B0 Received Address Register */ +sfr_b(UCB0ADDRX_H); /* USCI B0 Received Address Register */ +sfr_w(UCB0ADDMASK); /* USCI B0 Address Mask Register */ +sfr_b(UCB0ADDMASK_L); /* USCI B0 Address Mask Register */ +sfr_b(UCB0ADDMASK_H); /* USCI B0 Address Mask Register */ +sfr_w(UCB0I2CSA); /* USCI B0 I2C Slave Address */ +sfr_b(UCB0I2CSA_L); /* USCI B0 I2C Slave Address */ +sfr_b(UCB0I2CSA_H); /* USCI B0 I2C Slave Address */ +sfr_w(UCB0IE); /* USCI B0 Interrupt Enable Register */ +sfr_b(UCB0IE_L); /* USCI B0 Interrupt Enable Register */ +sfr_b(UCB0IE_H); /* USCI B0 Interrupt Enable Register */ +sfr_w(UCB0IFG); /* USCI B0 Interrupt Flags Register */ +sfr_b(UCB0IFG_L); /* USCI B0 Interrupt Flags Register */ +sfr_b(UCB0IFG_H); /* USCI B0 Interrupt Flags Register */ +sfr_w(UCB0IV); /* USCI B0 Interrupt Vector Register */ + +/************************************************************ +* USCI B1 +************************************************************/ +#define __MSP430_HAS_EUSCI_B1__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_EUSCI_B1__ 0x0680 +#define EUSCI_B1_BASE __MSP430_BASEADDRESS_EUSCI_B1__ + + +sfr_w(UCB1CTLW0); /* USCI B1 Control Word Register 0 */ +sfr_b(UCB1CTLW0_L); /* USCI B1 Control Word Register 0 */ +sfr_b(UCB1CTLW0_H); /* USCI B1 Control Word Register 0 */ +#define UCB1CTL1 UCB1CTLW0_L /* USCI B1 Control Register 1 */ +#define UCB1CTL0 UCB1CTLW0_H /* USCI B1 Control Register 0 */ +sfr_w(UCB1CTLW1); /* USCI B1 Control Word Register 1 */ +sfr_b(UCB1CTLW1_L); /* USCI B1 Control Word Register 1 */ +sfr_b(UCB1CTLW1_H); /* USCI B1 Control Word Register 1 */ +sfr_w(UCB1BRW); /* USCI B1 Baud Word Rate 0 */ +sfr_b(UCB1BRW_L); /* USCI B1 Baud Word Rate 0 */ +sfr_b(UCB1BRW_H); /* USCI B1 Baud Word Rate 0 */ +#define UCB1BR0 UCB1BRW_L /* USCI B1 Baud Rate 0 */ +#define UCB1BR1 UCB1BRW_H /* USCI B1 Baud Rate 1 */ +sfr_w(UCB1STATW); /* USCI B1 Status Word Register */ +sfr_b(UCB1STATW_L); /* USCI B1 Status Word Register */ +sfr_b(UCB1STATW_H); /* USCI B1 Status Word Register */ +#define UCB1STAT UCB1STATW_L /* USCI B1 Status Register */ +#define UCB1BCNT UCB1STATW_H /* USCI B1 Byte Counter Register */ +sfr_w(UCB1TBCNT); /* USCI B1 Byte Counter Threshold Register */ +sfr_b(UCB1TBCNT_L); /* USCI B1 Byte Counter Threshold Register */ +sfr_b(UCB1TBCNT_H); /* USCI B1 Byte Counter Threshold Register */ +sfr_w(UCB1RXBUF); /* USCI B1 Receive Buffer */ +sfr_b(UCB1RXBUF_L); /* USCI B1 Receive Buffer */ +sfr_b(UCB1RXBUF_H); /* USCI B1 Receive Buffer */ +sfr_w(UCB1TXBUF); /* USCI B1 Transmit Buffer */ +sfr_b(UCB1TXBUF_L); /* USCI B1 Transmit Buffer */ +sfr_b(UCB1TXBUF_H); /* USCI B1 Transmit Buffer */ +sfr_w(UCB1I2COA0); /* USCI B1 I2C Own Address 0 */ +sfr_b(UCB1I2COA0_L); /* USCI B1 I2C Own Address 0 */ +sfr_b(UCB1I2COA0_H); /* USCI B1 I2C Own Address 0 */ +sfr_w(UCB1I2COA1); /* USCI B1 I2C Own Address 1 */ +sfr_b(UCB1I2COA1_L); /* USCI B1 I2C Own Address 1 */ +sfr_b(UCB1I2COA1_H); /* USCI B1 I2C Own Address 1 */ +sfr_w(UCB1I2COA2); /* USCI B1 I2C Own Address 2 */ +sfr_b(UCB1I2COA2_L); /* USCI B1 I2C Own Address 2 */ +sfr_b(UCB1I2COA2_H); /* USCI B1 I2C Own Address 2 */ +sfr_w(UCB1I2COA3); /* USCI B1 I2C Own Address 3 */ +sfr_b(UCB1I2COA3_L); /* USCI B1 I2C Own Address 3 */ +sfr_b(UCB1I2COA3_H); /* USCI B1 I2C Own Address 3 */ +sfr_w(UCB1ADDRX); /* USCI B1 Received Address Register */ +sfr_b(UCB1ADDRX_L); /* USCI B1 Received Address Register */ +sfr_b(UCB1ADDRX_H); /* USCI B1 Received Address Register */ +sfr_w(UCB1ADDMASK); /* USCI B1 Address Mask Register */ +sfr_b(UCB1ADDMASK_L); /* USCI B1 Address Mask Register */ +sfr_b(UCB1ADDMASK_H); /* USCI B1 Address Mask Register */ +sfr_w(UCB1I2CSA); /* USCI B1 I2C Slave Address */ +sfr_b(UCB1I2CSA_L); /* USCI B1 I2C Slave Address */ +sfr_b(UCB1I2CSA_H); /* USCI B1 I2C Slave Address */ +sfr_w(UCB1IE); /* USCI B1 Interrupt Enable Register */ +sfr_b(UCB1IE_L); /* USCI B1 Interrupt Enable Register */ +sfr_b(UCB1IE_H); /* USCI B1 Interrupt Enable Register */ +sfr_w(UCB1IFG); /* USCI B1 Interrupt Flags Register */ +sfr_b(UCB1IFG_L); /* USCI B1 Interrupt Flags Register */ +sfr_b(UCB1IFG_H); /* USCI B1 Interrupt Flags Register */ +sfr_w(UCB1IV); /* USCI B1 Interrupt Vector Register */ + +// UCAxCTLW0 UART-Mode Control Bits +#define UCPEN (0x8000) /* Async. Mode: Parity enable */ +#define UCPAR (0x4000) /* Async. Mode: Parity 0:odd / 1:even */ +#define UCMSB (0x2000) /* Async. Mode: MSB first 0:LSB / 1:MSB */ +#define UC7BIT (0x1000) /* Async. Mode: Data Bits 0:8-bits / 1:7-bits */ +#define UCSPB (0x0800) /* Async. Mode: Stop Bits 0:one / 1: two */ +#define UCMODE1 (0x0400) /* Async. Mode: USCI Mode 1 */ +#define UCMODE0 (0x0200) /* Async. Mode: USCI Mode 0 */ +#define UCSYNC (0x0100) /* Sync-Mode 0:UART-Mode / 1:SPI-Mode */ +#define UCSSEL1 (0x0080) /* USCI 0 Clock Source Select 1 */ +#define UCSSEL0 (0x0040) /* USCI 0 Clock Source Select 0 */ +#define UCRXEIE (0x0020) /* RX Error interrupt enable */ +#define UCBRKIE (0x0010) /* Break interrupt enable */ +#define UCDORM (0x0008) /* Dormant (Sleep) Mode */ +#define UCTXADDR (0x0004) /* Send next Data as Address */ +#define UCTXBRK (0x0002) /* Send next Data as Break */ +#define UCSWRST (0x0001) /* USCI Software Reset */ + +// UCAxCTLW0 UART-Mode Control Bits +#define UCSSEL1_L (0x0080) /* USCI 0 Clock Source Select 1 */ +#define UCSSEL0_L (0x0040) /* USCI 0 Clock Source Select 0 */ +#define UCRXEIE_L (0x0020) /* RX Error interrupt enable */ +#define UCBRKIE_L (0x0010) /* Break interrupt enable */ +#define UCDORM_L (0x0008) /* Dormant (Sleep) Mode */ +#define UCTXADDR_L (0x0004) /* Send next Data as Address */ +#define UCTXBRK_L (0x0002) /* Send next Data as Break */ +#define UCSWRST_L (0x0001) /* USCI Software Reset */ + +// UCAxCTLW0 UART-Mode Control Bits +#define UCPEN_H (0x0080) /* Async. Mode: Parity enable */ +#define UCPAR_H (0x0040) /* Async. Mode: Parity 0:odd / 1:even */ +#define UCMSB_H (0x0020) /* Async. Mode: MSB first 0:LSB / 1:MSB */ +#define UC7BIT_H (0x0010) /* Async. Mode: Data Bits 0:8-bits / 1:7-bits */ +#define UCSPB_H (0x0008) /* Async. Mode: Stop Bits 0:one / 1: two */ +#define UCMODE1_H (0x0004) /* Async. Mode: USCI Mode 1 */ +#define UCMODE0_H (0x0002) /* Async. Mode: USCI Mode 0 */ +#define UCSYNC_H (0x0001) /* Sync-Mode 0:UART-Mode / 1:SPI-Mode */ + +// UCxxCTLW0 SPI-Mode Control Bits +#define UCCKPH (0x8000) /* Sync. Mode: Clock Phase */ +#define UCCKPL (0x4000) /* Sync. Mode: Clock Polarity */ +#define UCMST (0x0800) /* Sync. Mode: Master Select */ +//#define res (0x0020) /* reserved */ +//#define res (0x0010) /* reserved */ +//#define res (0x0008) /* reserved */ +//#define res (0x0004) /* reserved */ +#define UCSTEM (0x0002) /* USCI STE Mode */ + +// UCBxCTLW0 I2C-Mode Control Bits +#define UCA10 (0x8000) /* 10-bit Address Mode */ +#define UCSLA10 (0x4000) /* 10-bit Slave Address Mode */ +#define UCMM (0x2000) /* Multi-Master Environment */ +//#define res (0x1000) /* reserved */ +//#define res (0x0100) /* reserved */ +#define UCTXACK (0x0020) /* Transmit ACK */ +#define UCTR (0x0010) /* Transmit/Receive Select/Flag */ +#define UCTXNACK (0x0008) /* Transmit NACK */ +#define UCTXSTP (0x0004) /* Transmit STOP */ +#define UCTXSTT (0x0002) /* Transmit START */ + +// UCBxCTLW0 I2C-Mode Control Bits +//#define res (0x1000) /* reserved */ +//#define res (0x0100) /* reserved */ +#define UCTXACK_L (0x0020) /* Transmit ACK */ +#define UCTR_L (0x0010) /* Transmit/Receive Select/Flag */ +#define UCTXNACK_L (0x0008) /* Transmit NACK */ +#define UCTXSTP_L (0x0004) /* Transmit STOP */ +#define UCTXSTT_L (0x0002) /* Transmit START */ + +// UCBxCTLW0 I2C-Mode Control Bits +#define UCA10_H (0x0080) /* 10-bit Address Mode */ +#define UCSLA10_H (0x0040) /* 10-bit Slave Address Mode */ +#define UCMM_H (0x0020) /* Multi-Master Environment */ +//#define res (0x1000) /* reserved */ +//#define res (0x0100) /* reserved */ + +#define UCMODE_0 (0x0000) /* Sync. Mode: USCI Mode: 0 */ +#define UCMODE_1 (0x0200) /* Sync. Mode: USCI Mode: 1 */ +#define UCMODE_2 (0x0400) /* Sync. Mode: USCI Mode: 2 */ +#define UCMODE_3 (0x0600) /* Sync. Mode: USCI Mode: 3 */ + +#define UCSSEL_0 (0x0000) /* USCI 0 Clock Source: 0 */ +#define UCSSEL_1 (0x0040) /* USCI 0 Clock Source: 1 */ +#define UCSSEL_2 (0x0080) /* USCI 0 Clock Source: 2 */ +#define UCSSEL_3 (0x00C0) /* USCI 0 Clock Source: 3 */ +#define UCSSEL__UCLK (0x0000) /* USCI 0 Clock Source: UCLK */ +#define UCSSEL__ACLK (0x0040) /* USCI 0 Clock Source: ACLK */ +#define UCSSEL__SMCLK (0x0080) /* USCI 0 Clock Source: SMCLK */ + +// UCAxCTLW1 UART-Mode Control Bits +#define UCGLIT1 (0x0002) /* USCI Deglitch Time Bit 1 */ +#define UCGLIT0 (0x0001) /* USCI Deglitch Time Bit 0 */ + +// UCAxCTLW1 UART-Mode Control Bits +#define UCGLIT1_L (0x0002) /* USCI Deglitch Time Bit 1 */ +#define UCGLIT0_L (0x0001) /* USCI Deglitch Time Bit 0 */ + +// UCBxCTLW1 I2C-Mode Control Bits +#define UCETXINT (0x0100) /* USCI Early UCTXIFG0 */ +#define UCCLTO1 (0x0080) /* USCI Clock low timeout Bit: 1 */ +#define UCCLTO0 (0x0040) /* USCI Clock low timeout Bit: 0 */ +#define UCSTPNACK (0x0020) /* USCI Acknowledge Stop last byte */ +#define UCSWACK (0x0010) /* USCI Software controlled ACK */ +#define UCASTP1 (0x0008) /* USCI Automatic Stop condition generation Bit: 1 */ +#define UCASTP0 (0x0004) /* USCI Automatic Stop condition generation Bit: 0 */ +#define UCGLIT1 (0x0002) /* USCI Deglitch time Bit: 1 */ +#define UCGLIT0 (0x0001) /* USCI Deglitch time Bit: 0 */ + +// UCBxCTLW1 I2C-Mode Control Bits +#define UCCLTO1_L (0x0080) /* USCI Clock low timeout Bit: 1 */ +#define UCCLTO0_L (0x0040) /* USCI Clock low timeout Bit: 0 */ +#define UCSTPNACK_L (0x0020) /* USCI Acknowledge Stop last byte */ +#define UCSWACK_L (0x0010) /* USCI Software controlled ACK */ +#define UCASTP1_L (0x0008) /* USCI Automatic Stop condition generation Bit: 1 */ +#define UCASTP0_L (0x0004) /* USCI Automatic Stop condition generation Bit: 0 */ +#define UCGLIT1_L (0x0002) /* USCI Deglitch time Bit: 1 */ +#define UCGLIT0_L (0x0001) /* USCI Deglitch time Bit: 0 */ + +// UCBxCTLW1 I2C-Mode Control Bits +#define UCETXINT_H (0x0001) /* USCI Early UCTXIFG0 */ + +#define UCGLIT_0 (0x0000) /* USCI Deglitch time: 0 */ +#define UCGLIT_1 (0x0001) /* USCI Deglitch time: 1 */ +#define UCGLIT_2 (0x0002) /* USCI Deglitch time: 2 */ +#define UCGLIT_3 (0x0003) /* USCI Deglitch time: 3 */ + +#define UCASTP_0 (0x0000) /* USCI Automatic Stop condition generation: 0 */ +#define UCASTP_1 (0x0004) /* USCI Automatic Stop condition generation: 1 */ +#define UCASTP_2 (0x0008) /* USCI Automatic Stop condition generation: 2 */ +#define UCASTP_3 (0x000C) /* USCI Automatic Stop condition generation: 3 */ + +#define UCCLTO_0 (0x0000) /* USCI Clock low timeout: 0 */ +#define UCCLTO_1 (0x0040) /* USCI Clock low timeout: 1 */ +#define UCCLTO_2 (0x0080) /* USCI Clock low timeout: 2 */ +#define UCCLTO_3 (0x00C0) /* USCI Clock low timeout: 3 */ + +/* UCAxMCTLW Control Bits */ +#define UCBRS7 (0x8000) /* USCI Second Stage Modulation Select 7 */ +#define UCBRS6 (0x4000) /* USCI Second Stage Modulation Select 6 */ +#define UCBRS5 (0x2000) /* USCI Second Stage Modulation Select 5 */ +#define UCBRS4 (0x1000) /* USCI Second Stage Modulation Select 4 */ +#define UCBRS3 (0x0800) /* USCI Second Stage Modulation Select 3 */ +#define UCBRS2 (0x0400) /* USCI Second Stage Modulation Select 2 */ +#define UCBRS1 (0x0200) /* USCI Second Stage Modulation Select 1 */ +#define UCBRS0 (0x0100) /* USCI Second Stage Modulation Select 0 */ +#define UCBRF3 (0x0080) /* USCI First Stage Modulation Select 3 */ +#define UCBRF2 (0x0040) /* USCI First Stage Modulation Select 2 */ +#define UCBRF1 (0x0020) /* USCI First Stage Modulation Select 1 */ +#define UCBRF0 (0x0010) /* USCI First Stage Modulation Select 0 */ +#define UCOS16 (0x0001) /* USCI 16-times Oversampling enable */ + +/* UCAxMCTLW Control Bits */ +#define UCBRF3_L (0x0080) /* USCI First Stage Modulation Select 3 */ +#define UCBRF2_L (0x0040) /* USCI First Stage Modulation Select 2 */ +#define UCBRF1_L (0x0020) /* USCI First Stage Modulation Select 1 */ +#define UCBRF0_L (0x0010) /* USCI First Stage Modulation Select 0 */ +#define UCOS16_L (0x0001) /* USCI 16-times Oversampling enable */ + +/* UCAxMCTLW Control Bits */ +#define UCBRS7_H (0x0080) /* USCI Second Stage Modulation Select 7 */ +#define UCBRS6_H (0x0040) /* USCI Second Stage Modulation Select 6 */ +#define UCBRS5_H (0x0020) /* USCI Second Stage Modulation Select 5 */ +#define UCBRS4_H (0x0010) /* USCI Second Stage Modulation Select 4 */ +#define UCBRS3_H (0x0008) /* USCI Second Stage Modulation Select 3 */ +#define UCBRS2_H (0x0004) /* USCI Second Stage Modulation Select 2 */ +#define UCBRS1_H (0x0002) /* USCI Second Stage Modulation Select 1 */ +#define UCBRS0_H (0x0001) /* USCI Second Stage Modulation Select 0 */ + +#define UCBRF_0 (0x00) /* USCI First Stage Modulation: 0 */ +#define UCBRF_1 (0x10) /* USCI First Stage Modulation: 1 */ +#define UCBRF_2 (0x20) /* USCI First Stage Modulation: 2 */ +#define UCBRF_3 (0x30) /* USCI First Stage Modulation: 3 */ +#define UCBRF_4 (0x40) /* USCI First Stage Modulation: 4 */ +#define UCBRF_5 (0x50) /* USCI First Stage Modulation: 5 */ +#define UCBRF_6 (0x60) /* USCI First Stage Modulation: 6 */ +#define UCBRF_7 (0x70) /* USCI First Stage Modulation: 7 */ +#define UCBRF_8 (0x80) /* USCI First Stage Modulation: 8 */ +#define UCBRF_9 (0x90) /* USCI First Stage Modulation: 9 */ +#define UCBRF_10 (0xA0) /* USCI First Stage Modulation: A */ +#define UCBRF_11 (0xB0) /* USCI First Stage Modulation: B */ +#define UCBRF_12 (0xC0) /* USCI First Stage Modulation: C */ +#define UCBRF_13 (0xD0) /* USCI First Stage Modulation: D */ +#define UCBRF_14 (0xE0) /* USCI First Stage Modulation: E */ +#define UCBRF_15 (0xF0) /* USCI First Stage Modulation: F */ + +/* UCAxSTATW Control Bits */ +#define UCLISTEN (0x0080) /* USCI Listen mode */ +#define UCFE (0x0040) /* USCI Frame Error Flag */ +#define UCOE (0x0020) /* USCI Overrun Error Flag */ +#define UCPE (0x0010) /* USCI Parity Error Flag */ +#define UCBRK (0x0008) /* USCI Break received */ +#define UCRXERR (0x0004) /* USCI RX Error Flag */ +#define UCADDR (0x0002) /* USCI Address received Flag */ +#define UCBUSY (0x0001) /* USCI Busy Flag */ +#define UCIDLE (0x0002) /* USCI Idle line detected Flag */ + +/* UCBxSTATW I2C Control Bits */ +#define UCBCNT7 (0x8000) /* USCI Byte Counter Bit 7 */ +#define UCBCNT6 (0x4000) /* USCI Byte Counter Bit 6 */ +#define UCBCNT5 (0x2000) /* USCI Byte Counter Bit 5 */ +#define UCBCNT4 (0x1000) /* USCI Byte Counter Bit 4 */ +#define UCBCNT3 (0x0800) /* USCI Byte Counter Bit 3 */ +#define UCBCNT2 (0x0400) /* USCI Byte Counter Bit 2 */ +#define UCBCNT1 (0x0200) /* USCI Byte Counter Bit 1 */ +#define UCBCNT0 (0x0100) /* USCI Byte Counter Bit 0 */ +#define UCSCLLOW (0x0040) /* SCL low */ +#define UCGC (0x0020) /* General Call address received Flag */ +#define UCBBUSY (0x0010) /* Bus Busy Flag */ + +/* UCBxTBCNT I2C Control Bits */ +#define UCTBCNT7 (0x0080) /* USCI Byte Counter Bit 7 */ +#define UCTBCNT6 (0x0040) /* USCI Byte Counter Bit 6 */ +#define UCTBCNT5 (0x0020) /* USCI Byte Counter Bit 5 */ +#define UCTBCNT4 (0x0010) /* USCI Byte Counter Bit 4 */ +#define UCTBCNT3 (0x0008) /* USCI Byte Counter Bit 3 */ +#define UCTBCNT2 (0x0004) /* USCI Byte Counter Bit 2 */ +#define UCTBCNT1 (0x0002) /* USCI Byte Counter Bit 1 */ +#define UCTBCNT0 (0x0001) /* USCI Byte Counter Bit 0 */ + +/* UCAxIRCTL Control Bits */ +#define UCIRRXFL5 (0x8000) /* IRDA Receive Filter Length 5 */ +#define UCIRRXFL4 (0x4000) /* IRDA Receive Filter Length 4 */ +#define UCIRRXFL3 (0x2000) /* IRDA Receive Filter Length 3 */ +#define UCIRRXFL2 (0x1000) /* IRDA Receive Filter Length 2 */ +#define UCIRRXFL1 (0x0800) /* IRDA Receive Filter Length 1 */ +#define UCIRRXFL0 (0x0400) /* IRDA Receive Filter Length 0 */ +#define UCIRRXPL (0x0200) /* IRDA Receive Input Polarity */ +#define UCIRRXFE (0x0100) /* IRDA Receive Filter enable */ +#define UCIRTXPL5 (0x0080) /* IRDA Transmit Pulse Length 5 */ +#define UCIRTXPL4 (0x0040) /* IRDA Transmit Pulse Length 4 */ +#define UCIRTXPL3 (0x0020) /* IRDA Transmit Pulse Length 3 */ +#define UCIRTXPL2 (0x0010) /* IRDA Transmit Pulse Length 2 */ +#define UCIRTXPL1 (0x0008) /* IRDA Transmit Pulse Length 1 */ +#define UCIRTXPL0 (0x0004) /* IRDA Transmit Pulse Length 0 */ +#define UCIRTXCLK (0x0002) /* IRDA Transmit Pulse Clock Select */ +#define UCIREN (0x0001) /* IRDA Encoder/Decoder enable */ + +/* UCAxIRCTL Control Bits */ +#define UCIRTXPL5_L (0x0080) /* IRDA Transmit Pulse Length 5 */ +#define UCIRTXPL4_L (0x0040) /* IRDA Transmit Pulse Length 4 */ +#define UCIRTXPL3_L (0x0020) /* IRDA Transmit Pulse Length 3 */ +#define UCIRTXPL2_L (0x0010) /* IRDA Transmit Pulse Length 2 */ +#define UCIRTXPL1_L (0x0008) /* IRDA Transmit Pulse Length 1 */ +#define UCIRTXPL0_L (0x0004) /* IRDA Transmit Pulse Length 0 */ +#define UCIRTXCLK_L (0x0002) /* IRDA Transmit Pulse Clock Select */ +#define UCIREN_L (0x0001) /* IRDA Encoder/Decoder enable */ + +/* UCAxIRCTL Control Bits */ +#define UCIRRXFL5_H (0x0080) /* IRDA Receive Filter Length 5 */ +#define UCIRRXFL4_H (0x0040) /* IRDA Receive Filter Length 4 */ +#define UCIRRXFL3_H (0x0020) /* IRDA Receive Filter Length 3 */ +#define UCIRRXFL2_H (0x0010) /* IRDA Receive Filter Length 2 */ +#define UCIRRXFL1_H (0x0008) /* IRDA Receive Filter Length 1 */ +#define UCIRRXFL0_H (0x0004) /* IRDA Receive Filter Length 0 */ +#define UCIRRXPL_H (0x0002) /* IRDA Receive Input Polarity */ +#define UCIRRXFE_H (0x0001) /* IRDA Receive Filter enable */ + +/* UCAxABCTL Control Bits */ +//#define res (0x80) /* reserved */ +//#define res (0x40) /* reserved */ +#define UCDELIM1 (0x20) /* Break Sync Delimiter 1 */ +#define UCDELIM0 (0x10) /* Break Sync Delimiter 0 */ +#define UCSTOE (0x08) /* Sync-Field Timeout error */ +#define UCBTOE (0x04) /* Break Timeout error */ +//#define res (0x02) /* reserved */ +#define UCABDEN (0x01) /* Auto Baud Rate detect enable */ + +/* UCBxI2COA0 Control Bits */ +#define UCGCEN (0x8000) /* I2C General Call enable */ +#define UCOAEN (0x0400) /* I2C Own Address enable */ +#define UCOA9 (0x0200) /* I2C Own Address Bit 9 */ +#define UCOA8 (0x0100) /* I2C Own Address Bit 8 */ +#define UCOA7 (0x0080) /* I2C Own Address Bit 7 */ +#define UCOA6 (0x0040) /* I2C Own Address Bit 6 */ +#define UCOA5 (0x0020) /* I2C Own Address Bit 5 */ +#define UCOA4 (0x0010) /* I2C Own Address Bit 4 */ +#define UCOA3 (0x0008) /* I2C Own Address Bit 3 */ +#define UCOA2 (0x0004) /* I2C Own Address Bit 2 */ +#define UCOA1 (0x0002) /* I2C Own Address Bit 1 */ +#define UCOA0 (0x0001) /* I2C Own Address Bit 0 */ + +/* UCBxI2COA0 Control Bits */ +#define UCOA7_L (0x0080) /* I2C Own Address Bit 7 */ +#define UCOA6_L (0x0040) /* I2C Own Address Bit 6 */ +#define UCOA5_L (0x0020) /* I2C Own Address Bit 5 */ +#define UCOA4_L (0x0010) /* I2C Own Address Bit 4 */ +#define UCOA3_L (0x0008) /* I2C Own Address Bit 3 */ +#define UCOA2_L (0x0004) /* I2C Own Address Bit 2 */ +#define UCOA1_L (0x0002) /* I2C Own Address Bit 1 */ +#define UCOA0_L (0x0001) /* I2C Own Address Bit 0 */ + +/* UCBxI2COA0 Control Bits */ +#define UCGCEN_H (0x0080) /* I2C General Call enable */ +#define UCOAEN_H (0x0004) /* I2C Own Address enable */ +#define UCOA9_H (0x0002) /* I2C Own Address Bit 9 */ +#define UCOA8_H (0x0001) /* I2C Own Address Bit 8 */ + +/* UCBxI2COAx Control Bits */ +#define UCOAEN (0x0400) /* I2C Own Address enable */ +#define UCOA9 (0x0200) /* I2C Own Address Bit 9 */ +#define UCOA8 (0x0100) /* I2C Own Address Bit 8 */ +#define UCOA7 (0x0080) /* I2C Own Address Bit 7 */ +#define UCOA6 (0x0040) /* I2C Own Address Bit 6 */ +#define UCOA5 (0x0020) /* I2C Own Address Bit 5 */ +#define UCOA4 (0x0010) /* I2C Own Address Bit 4 */ +#define UCOA3 (0x0008) /* I2C Own Address Bit 3 */ +#define UCOA2 (0x0004) /* I2C Own Address Bit 2 */ +#define UCOA1 (0x0002) /* I2C Own Address Bit 1 */ +#define UCOA0 (0x0001) /* I2C Own Address Bit 0 */ + +/* UCBxI2COAx Control Bits */ +#define UCOA7_L (0x0080) /* I2C Own Address Bit 7 */ +#define UCOA6_L (0x0040) /* I2C Own Address Bit 6 */ +#define UCOA5_L (0x0020) /* I2C Own Address Bit 5 */ +#define UCOA4_L (0x0010) /* I2C Own Address Bit 4 */ +#define UCOA3_L (0x0008) /* I2C Own Address Bit 3 */ +#define UCOA2_L (0x0004) /* I2C Own Address Bit 2 */ +#define UCOA1_L (0x0002) /* I2C Own Address Bit 1 */ +#define UCOA0_L (0x0001) /* I2C Own Address Bit 0 */ + +/* UCBxI2COAx Control Bits */ +#define UCOAEN_H (0x0004) /* I2C Own Address enable */ +#define UCOA9_H (0x0002) /* I2C Own Address Bit 9 */ +#define UCOA8_H (0x0001) /* I2C Own Address Bit 8 */ + +/* UCBxADDRX Control Bits */ +#define UCADDRX9 (0x0200) /* I2C Receive Address Bit 9 */ +#define UCADDRX8 (0x0100) /* I2C Receive Address Bit 8 */ +#define UCADDRX7 (0x0080) /* I2C Receive Address Bit 7 */ +#define UCADDRX6 (0x0040) /* I2C Receive Address Bit 6 */ +#define UCADDRX5 (0x0020) /* I2C Receive Address Bit 5 */ +#define UCADDRX4 (0x0010) /* I2C Receive Address Bit 4 */ +#define UCADDRX3 (0x0008) /* I2C Receive Address Bit 3 */ +#define UCADDRX2 (0x0004) /* I2C Receive Address Bit 2 */ +#define UCADDRX1 (0x0002) /* I2C Receive Address Bit 1 */ +#define UCADDRX0 (0x0001) /* I2C Receive Address Bit 0 */ + +/* UCBxADDRX Control Bits */ +#define UCADDRX7_L (0x0080) /* I2C Receive Address Bit 7 */ +#define UCADDRX6_L (0x0040) /* I2C Receive Address Bit 6 */ +#define UCADDRX5_L (0x0020) /* I2C Receive Address Bit 5 */ +#define UCADDRX4_L (0x0010) /* I2C Receive Address Bit 4 */ +#define UCADDRX3_L (0x0008) /* I2C Receive Address Bit 3 */ +#define UCADDRX2_L (0x0004) /* I2C Receive Address Bit 2 */ +#define UCADDRX1_L (0x0002) /* I2C Receive Address Bit 1 */ +#define UCADDRX0_L (0x0001) /* I2C Receive Address Bit 0 */ + +/* UCBxADDRX Control Bits */ +#define UCADDRX9_H (0x0002) /* I2C Receive Address Bit 9 */ +#define UCADDRX8_H (0x0001) /* I2C Receive Address Bit 8 */ + +/* UCBxADDMASK Control Bits */ +#define UCADDMASK9 (0x0200) /* I2C Address Mask Bit 9 */ +#define UCADDMASK8 (0x0100) /* I2C Address Mask Bit 8 */ +#define UCADDMASK7 (0x0080) /* I2C Address Mask Bit 7 */ +#define UCADDMASK6 (0x0040) /* I2C Address Mask Bit 6 */ +#define UCADDMASK5 (0x0020) /* I2C Address Mask Bit 5 */ +#define UCADDMASK4 (0x0010) /* I2C Address Mask Bit 4 */ +#define UCADDMASK3 (0x0008) /* I2C Address Mask Bit 3 */ +#define UCADDMASK2 (0x0004) /* I2C Address Mask Bit 2 */ +#define UCADDMASK1 (0x0002) /* I2C Address Mask Bit 1 */ +#define UCADDMASK0 (0x0001) /* I2C Address Mask Bit 0 */ + +/* UCBxADDMASK Control Bits */ +#define UCADDMASK7_L (0x0080) /* I2C Address Mask Bit 7 */ +#define UCADDMASK6_L (0x0040) /* I2C Address Mask Bit 6 */ +#define UCADDMASK5_L (0x0020) /* I2C Address Mask Bit 5 */ +#define UCADDMASK4_L (0x0010) /* I2C Address Mask Bit 4 */ +#define UCADDMASK3_L (0x0008) /* I2C Address Mask Bit 3 */ +#define UCADDMASK2_L (0x0004) /* I2C Address Mask Bit 2 */ +#define UCADDMASK1_L (0x0002) /* I2C Address Mask Bit 1 */ +#define UCADDMASK0_L (0x0001) /* I2C Address Mask Bit 0 */ + +/* UCBxADDMASK Control Bits */ +#define UCADDMASK9_H (0x0002) /* I2C Address Mask Bit 9 */ +#define UCADDMASK8_H (0x0001) /* I2C Address Mask Bit 8 */ + +/* UCBxI2CSA Control Bits */ +#define UCSA9 (0x0200) /* I2C Slave Address Bit 9 */ +#define UCSA8 (0x0100) /* I2C Slave Address Bit 8 */ +#define UCSA7 (0x0080) /* I2C Slave Address Bit 7 */ +#define UCSA6 (0x0040) /* I2C Slave Address Bit 6 */ +#define UCSA5 (0x0020) /* I2C Slave Address Bit 5 */ +#define UCSA4 (0x0010) /* I2C Slave Address Bit 4 */ +#define UCSA3 (0x0008) /* I2C Slave Address Bit 3 */ +#define UCSA2 (0x0004) /* I2C Slave Address Bit 2 */ +#define UCSA1 (0x0002) /* I2C Slave Address Bit 1 */ +#define UCSA0 (0x0001) /* I2C Slave Address Bit 0 */ + +/* UCBxI2CSA Control Bits */ +#define UCSA7_L (0x0080) /* I2C Slave Address Bit 7 */ +#define UCSA6_L (0x0040) /* I2C Slave Address Bit 6 */ +#define UCSA5_L (0x0020) /* I2C Slave Address Bit 5 */ +#define UCSA4_L (0x0010) /* I2C Slave Address Bit 4 */ +#define UCSA3_L (0x0008) /* I2C Slave Address Bit 3 */ +#define UCSA2_L (0x0004) /* I2C Slave Address Bit 2 */ +#define UCSA1_L (0x0002) /* I2C Slave Address Bit 1 */ +#define UCSA0_L (0x0001) /* I2C Slave Address Bit 0 */ + +/* UCBxI2CSA Control Bits */ +#define UCSA9_H (0x0002) /* I2C Slave Address Bit 9 */ +#define UCSA8_H (0x0001) /* I2C Slave Address Bit 8 */ + +/* UCAxIE UART Control Bits */ +#define UCTXCPTIE (0x0008) /* UART Transmit Complete Interrupt Enable */ +#define UCSTTIE (0x0004) /* UART Start Bit Interrupt Enalble */ +#define UCTXIE (0x0002) /* UART Transmit Interrupt Enable */ +#define UCRXIE (0x0001) /* UART Receive Interrupt Enable */ + +/* UCAxIE/UCBxIE SPI Control Bits */ + +/* UCBxIE I2C Control Bits */ +#define UCBIT9IE (0x4000) /* I2C Bit 9 Position Interrupt Enable 3 */ +#define UCTXIE3 (0x2000) /* I2C Transmit Interrupt Enable 3 */ +#define UCRXIE3 (0x1000) /* I2C Receive Interrupt Enable 3 */ +#define UCTXIE2 (0x0800) /* I2C Transmit Interrupt Enable 2 */ +#define UCRXIE2 (0x0400) /* I2C Receive Interrupt Enable 2 */ +#define UCTXIE1 (0x0200) /* I2C Transmit Interrupt Enable 1 */ +#define UCRXIE1 (0x0100) /* I2C Receive Interrupt Enable 1 */ +#define UCCLTOIE (0x0080) /* I2C Clock Low Timeout interrupt enable */ +#define UCBCNTIE (0x0040) /* I2C Automatic stop assertion interrupt enable */ +#define UCNACKIE (0x0020) /* I2C NACK Condition interrupt enable */ +#define UCALIE (0x0010) /* I2C Arbitration Lost interrupt enable */ +#define UCSTPIE (0x0008) /* I2C STOP Condition interrupt enable */ +#define UCSTTIE (0x0004) /* I2C START Condition interrupt enable */ +#define UCTXIE0 (0x0002) /* I2C Transmit Interrupt Enable 0 */ +#define UCRXIE0 (0x0001) /* I2C Receive Interrupt Enable 0 */ + +/* UCAxIFG UART Control Bits */ +#define UCTXCPTIFG (0x0008) /* UART Transmit Complete Interrupt Flag */ +#define UCSTTIFG (0x0004) /* UART Start Bit Interrupt Flag */ +#define UCTXIFG (0x0002) /* UART Transmit Interrupt Flag */ +#define UCRXIFG (0x0001) /* UART Receive Interrupt Flag */ + +/* UCAxIFG/UCBxIFG SPI Control Bits */ +#define UCTXIFG (0x0002) /* SPI Transmit Interrupt Flag */ +#define UCRXIFG (0x0001) /* SPI Receive Interrupt Flag */ + +/* UCBxIFG Control Bits */ +#define UCBIT9IFG (0x4000) /* I2C Bit 9 Possition Interrupt Flag 3 */ +#define UCTXIFG3 (0x2000) /* I2C Transmit Interrupt Flag 3 */ +#define UCRXIFG3 (0x1000) /* I2C Receive Interrupt Flag 3 */ +#define UCTXIFG2 (0x0800) /* I2C Transmit Interrupt Flag 2 */ +#define UCRXIFG2 (0x0400) /* I2C Receive Interrupt Flag 2 */ +#define UCTXIFG1 (0x0200) /* I2C Transmit Interrupt Flag 1 */ +#define UCRXIFG1 (0x0100) /* I2C Receive Interrupt Flag 1 */ +#define UCCLTOIFG (0x0080) /* I2C Clock low Timeout interrupt Flag */ +#define UCBCNTIFG (0x0040) /* I2C Byte counter interrupt flag */ +#define UCNACKIFG (0x0020) /* I2C NACK Condition interrupt Flag */ +#define UCALIFG (0x0010) /* I2C Arbitration Lost interrupt Flag */ +#define UCSTPIFG (0x0008) /* I2C STOP Condition interrupt Flag */ +#define UCSTTIFG (0x0004) /* I2C START Condition interrupt Flag */ +#define UCTXIFG0 (0x0002) /* I2C Transmit Interrupt Flag 0 */ +#define UCRXIFG0 (0x0001) /* I2C Receive Interrupt Flag 0 */ + +/* USCI Interrupt Vector UART Definitions */ +#define USCI_NONE (0x0000) /* No Interrupt pending */ +#define USCI_UART_UCRXIFG (0x0002) /* Interrupt Vector: UCRXIFG */ +#define USCI_UART_UCTXIFG (0x0004) /* Interrupt Vector: UCTXIFG */ +#define USCI_UART_UCSTTIFG (0x0006) /* Interrupt Vector: UCSTTIFG */ +#define USCI_UART_UCTXCPTIFG (0x0008) /* Interrupt Vector: UCTXCPTIFG */ + +/* USCI Interrupt Vector SPI Definitions */ +#define USCI_SPI_UCRXIFG (0x0002) /* Interrupt Vector: UCRXIFG */ +#define USCI_SPI_UCTXIFG (0x0004) /* Interrupt Vector: UCTXIFG */ + +/* USCI Interrupt Vector I2C Definitions */ +#define USCI_I2C_UCALIFG (0x0002) /* Interrupt Vector: I2C Mode: UCALIFG */ +#define USCI_I2C_UCNACKIFG (0x0004) /* Interrupt Vector: I2C Mode: UCNACKIFG */ +#define USCI_I2C_UCSTTIFG (0x0006) /* Interrupt Vector: I2C Mode: UCSTTIFG*/ +#define USCI_I2C_UCSTPIFG (0x0008) /* Interrupt Vector: I2C Mode: UCSTPIFG*/ +#define USCI_I2C_UCRXIFG3 (0x000A) /* Interrupt Vector: I2C Mode: UCRXIFG3 */ +#define USCI_I2C_UCTXIFG3 (0x000C) /* Interrupt Vector: I2C Mode: UCTXIFG3 */ +#define USCI_I2C_UCRXIFG2 (0x000E) /* Interrupt Vector: I2C Mode: UCRXIFG2 */ +#define USCI_I2C_UCTXIFG2 (0x0010) /* Interrupt Vector: I2C Mode: UCTXIFG2 */ +#define USCI_I2C_UCRXIFG1 (0x0012) /* Interrupt Vector: I2C Mode: UCRXIFG1 */ +#define USCI_I2C_UCTXIFG1 (0x0014) /* Interrupt Vector: I2C Mode: UCTXIFG1 */ +#define USCI_I2C_UCRXIFG0 (0x0016) /* Interrupt Vector: I2C Mode: UCRXIFG0 */ +#define USCI_I2C_UCTXIFG0 (0x0018) /* Interrupt Vector: I2C Mode: UCTXIFG0 */ +#define USCI_I2C_UCBCNTIFG (0x001A) /* Interrupt Vector: I2C Mode: UCBCNTIFG */ +#define USCI_I2C_UCCLTOIFG (0x001C) /* Interrupt Vector: I2C Mode: UCCLTOIFG */ +#define USCI_I2C_UCBIT9IFG (0x001E) /* Interrupt Vector: I2C Mode: UCBIT9IFG */ + +/************************************************************ +* WATCHDOG TIMER A +************************************************************/ +#define __MSP430_HAS_WDT_A__ /* Definition to show that Module is available */ +#define __MSP430_BASEADDRESS_WDT_A__ 0x0150 +#define WDT_A_BASE __MSP430_BASEADDRESS_WDT_A__ + +sfr_w(WDTCTL); /* Watchdog Timer Control */ +sfr_b(WDTCTL_L); /* Watchdog Timer Control */ +sfr_b(WDTCTL_H); /* Watchdog Timer Control */ +/* The bit names have been prefixed with "WDT" */ +/* WDTCTL Control Bits */ +#define WDTIS0 (0x0001) /* WDT - Timer Interval Select 0 */ +#define WDTIS1 (0x0002) /* WDT - Timer Interval Select 1 */ +#define WDTIS2 (0x0004) /* WDT - Timer Interval Select 2 */ +#define WDTCNTCL (0x0008) /* WDT - Timer Clear */ +#define WDTTMSEL (0x0010) /* WDT - Timer Mode Select */ +#define WDTSSEL0 (0x0020) /* WDT - Timer Clock Source Select 0 */ +#define WDTSSEL1 (0x0040) /* WDT - Timer Clock Source Select 1 */ +#define WDTHOLD (0x0080) /* WDT - Timer hold */ + +/* WDTCTL Control Bits */ +#define WDTIS0_L (0x0001) /* WDT - Timer Interval Select 0 */ +#define WDTIS1_L (0x0002) /* WDT - Timer Interval Select 1 */ +#define WDTIS2_L (0x0004) /* WDT - Timer Interval Select 2 */ +#define WDTCNTCL_L (0x0008) /* WDT - Timer Clear */ +#define WDTTMSEL_L (0x0010) /* WDT - Timer Mode Select */ +#define WDTSSEL0_L (0x0020) /* WDT - Timer Clock Source Select 0 */ +#define WDTSSEL1_L (0x0040) /* WDT - Timer Clock Source Select 1 */ +#define WDTHOLD_L (0x0080) /* WDT - Timer hold */ + +#define WDTPW (0x5A00) + +#define WDTIS_0 (0x0000) /* WDT - Timer Interval Select: /2G */ +#define WDTIS_1 (0x0001) /* WDT - Timer Interval Select: /128M */ +#define WDTIS_2 (0x0002) /* WDT - Timer Interval Select: /8192k */ +#define WDTIS_3 (0x0003) /* WDT - Timer Interval Select: /512k */ +#define WDTIS_4 (0x0004) /* WDT - Timer Interval Select: /32k */ +#define WDTIS_5 (0x0005) /* WDT - Timer Interval Select: /8192 */ +#define WDTIS_6 (0x0006) /* WDT - Timer Interval Select: /512 */ +#define WDTIS_7 (0x0007) /* WDT - Timer Interval Select: /64 */ +#define WDTIS__2G (0x0000) /* WDT - Timer Interval Select: /2G */ +#define WDTIS__128M (0x0001) /* WDT - Timer Interval Select: /128M */ +#define WDTIS__8192K (0x0002) /* WDT - Timer Interval Select: /8192k */ +#define WDTIS__512K (0x0003) /* WDT - Timer Interval Select: /512k */ +#define WDTIS__32K (0x0004) /* WDT - Timer Interval Select: /32k */ +#define WDTIS__8192 (0x0005) /* WDT - Timer Interval Select: /8192 */ +#define WDTIS__512 (0x0006) /* WDT - Timer Interval Select: /512 */ +#define WDTIS__64 (0x0007) /* WDT - Timer Interval Select: /64 */ + +#define WDTSSEL_0 (0x0000) /* WDT - Timer Clock Source Select: SMCLK */ +#define WDTSSEL_1 (0x0020) /* WDT - Timer Clock Source Select: ACLK */ +#define WDTSSEL_2 (0x0040) /* WDT - Timer Clock Source Select: VLO_CLK */ +#define WDTSSEL_3 (0x0060) /* WDT - Timer Clock Source Select: reserved */ +#define WDTSSEL__SMCLK (0x0000) /* WDT - Timer Clock Source Select: SMCLK */ +#define WDTSSEL__ACLK (0x0020) /* WDT - Timer Clock Source Select: ACLK */ +#define WDTSSEL__VLO (0x0040) /* WDT - Timer Clock Source Select: VLO_CLK */ + +/* WDT-interval times [1ms] coded with Bits 0-2 */ +/* WDT is clocked by fSMCLK (assumed 1MHz) */ +#define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2) /* 32ms interval (default) */ +#define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTIS0) /* 8ms " */ +#define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTIS1) /* 0.5ms " */ +#define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTIS1+WDTIS0) /* 0.064ms " */ +/* WDT is clocked by fACLK (assumed 32KHz) */ +#define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTSSEL0) /* 1000ms " */ +#define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTSSEL0+WDTIS0) /* 250ms " */ +#define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTSSEL0+WDTIS1) /* 16ms " */ +#define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS2+WDTSSEL0+WDTIS1+WDTIS0) /* 1.9ms " */ +/* Watchdog mode -> reset after expired time */ +/* WDT is clocked by fSMCLK (assumed 1MHz) */ +#define WDT_MRST_32 (WDTPW+WDTCNTCL+WDTIS2) /* 32ms interval (default) */ +#define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS2+WDTIS0) /* 8ms " */ +#define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS2+WDTIS1) /* 0.5ms " */ +#define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS2+WDTIS1+WDTIS0) /* 0.064ms " */ +/* WDT is clocked by fACLK (assumed 32KHz) */ +#define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL0+WDTIS2) /* 1000ms " */ +#define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL0+WDTIS2+WDTIS0) /* 250ms " */ +#define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL0+WDTIS2+WDTIS1) /* 16ms " */ +#define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL0+WDTIS2+WDTIS1+WDTIS0) /* 1.9ms " */ + + +/************************************************************ +* TLV Descriptors +************************************************************/ +#define __MSP430_HAS_TLV__ /* Definition to show that Module is available */ +#define TLV_BASE __MSP430_BASEADDRESS_TLV__ + +#define TLV_CRC_LENGTH (0x1A01) /* CRC length of the TLV structure */ +#define TLV_CRC_VALUE (0x1A02) /* CRC value of the TLV structure */ +#define TLV_START (0x1A08) /* Start Address of the TLV structure */ +#define TLV_END (0x1AFF) /* End Address of the TLV structure */ + +#define TLV_LDTAG (0x01) /* Legacy descriptor (1xx, 2xx, 4xx families) */ +#define TLV_PDTAG (0x02) /* Peripheral discovery descriptor */ +#define TLV_Reserved3 (0x03) /* Future usage */ +#define TLV_Reserved4 (0x04) /* Future usage */ +#define TLV_BLANK (0x05) /* Blank descriptor */ +#define TLV_Reserved6 (0x06) /* Future usage */ +#define TLV_Reserved7 (0x07) /* Serial Number */ +#define TLV_DIERECORD (0x08) /* Die Record */ +#define TLV_ADCCAL (0x11) /* ADC12 calibration */ +#define TLV_ADC12CAL (0x11) /* ADC12 calibration */ +#define TLV_ADC10CAL (0x13) /* ADC10 calibration */ +#define TLV_REFCAL (0x12) /* REF calibration */ +#define TLV_TAGEXT (0xFE) /* Tag extender */ +#define TLV_TAGEND (0xFF) // Tag End of Table + +/************************************************************ +* Interrupt Vectors (offset from 0xFF80 + 0x10 for Password) +************************************************************/ + + +#define AES256_VECTOR (28) /* 0xFFC6 AES256 */ +#define RTC_VECTOR (29) /* 0xFFC8 RTC */ +#define LCD_C_VECTOR (30) /* 0xFFCA LCD C */ +#define PORT4_VECTOR (31) /* 0xFFCC Port 4 */ +#define PORT3_VECTOR (32) /* 0xFFCE Port 3 */ +#define TIMER3_A1_VECTOR (33) /* 0xFFD0 Timer3_A2 CC1, TA */ +#define TIMER3_A0_VECTOR (34) /* 0xFFD2 Timer3_A2 CC0 */ +#define PORT2_VECTOR (35) /* 0xFFD4 Port 2 */ +#define TIMER2_A1_VECTOR (36) /* 0xFFD6 Timer2_A3 CC1, TA */ +#define TIMER2_A0_VECTOR (37) /* 0xFFD8 Timer2_A3 CC0 */ +#define PORT1_VECTOR (38) /* 0xFFDA Port 1 */ +#define TIMER1_A1_VECTOR (39) /* 0xFFDC Timer1_A3 CC1-2, TA1 */ +#define TIMER1_A0_VECTOR (40) /* 0xFFDE Timer1_A3 CC0 */ +#define DMA_VECTOR (41) /* 0xFFE0 DMA */ +#define USCI_B1_VECTOR (42) /* 0xFFE2 USCI B1 Receive/Transmit */ +#define USCI_A1_VECTOR (43) /* 0xFFE4 USCI A1 Receive/Transmit */ +#define TIMER0_A1_VECTOR (44) /* 0xFFE6 Timer0_A5 CC1-4, TA */ +#define TIMER0_A0_VECTOR (45) /* 0xFFE8 Timer0_A5 CC0 */ +#define ADC12_VECTOR (46) /* 0xFFEA ADC */ +#define USCI_B0_VECTOR (47) /* 0xFFEC USCI B0 Receive/Transmit */ +#define USCI_A0_VECTOR (48) /* 0xFFEE USCI A0 Receive/Transmit */ +#define ESCAN_IF_VECTOR (49) /* 0xFFF0 Extended Scan IF */ +#define WDT_VECTOR (50) /* 0xFFF2 Watchdog Timer */ +#define TIMER0_B1_VECTOR (51) /* 0xFFF4 Timer0_B3 CC1-2, TB */ +#define TIMER0_B0_VECTOR (52) /* 0xFFF6 Timer0_B3 CC0 */ +#define COMP_E_VECTOR (53) /* 0xFFF8 Comparator E */ +#define UNMI_VECTOR (54) /* 0xFFFA User Non-maskable */ +#define SYSNMI_VECTOR (55) /* 0xFFFC System Non-maskable */ +#define RESET_VECTOR ("reset") /* 0xFFFE Reset [Highest Priority] */ + +/************************************************************ +* End of Modules +************************************************************/ + +#ifdef __cplusplus +} +#endif /* extern "C" */ + +#endif /* #ifndef __MSP430FR6989 */ + diff --git a/os/common/ext/TivaWare/inc/asmdefs.h b/os/common/ext/TivaWare/inc/asmdefs.h new file mode 100644 index 0000000..062cb09 --- /dev/null +++ b/os/common/ext/TivaWare/inc/asmdefs.h @@ -0,0 +1,227 @@ +//***************************************************************************** +// +// asmdefs.h - Macros to allow assembly code be portable among toolchains. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __ASMDEFS_H__ +#define __ASMDEFS_H__ + +//***************************************************************************** +// +// The defines required for code_red. +// +//***************************************************************************** +#ifdef codered + +// +// The assembly code preamble required to put the assembler into the correct +// configuration. +// + .syntax unified + .thumb + +// +// Section headers. +// +#define __LIBRARY__ @ +#define __TEXT__ .text +#define __DATA__ .data +#define __BSS__ .bss +#define __TEXT_NOROOT__ .text + +// +// Assembler nmenonics. +// +#define __ALIGN__ .balign 4 +#define __END__ .end +#define __EXPORT__ .globl +#define __IMPORT__ .extern +#define __LABEL__ : +#define __STR__ .ascii +#define __THUMB_LABEL__ .thumb_func +#define __WORD__ .word +#define __INLINE_DATA__ + +#endif // codered + +//***************************************************************************** +// +// The defines required for EW-ARM. +// +//***************************************************************************** +#ifdef ewarm + +// +// Section headers. +// +#define __LIBRARY__ module +#define __TEXT__ rseg CODE:CODE(2) +#define __DATA__ rseg DATA:DATA(2) +#define __BSS__ rseg DATA:DATA(2) +#define __TEXT_NOROOT__ rseg CODE:CODE:NOROOT(2) + +// +// Assembler nmenonics. +// +#define __ALIGN__ alignrom 2 +#define __END__ end +#define __EXPORT__ export +#define __IMPORT__ import +#define __LABEL__ +#define __STR__ dcb +#define __THUMB_LABEL__ thumb +#define __WORD__ dcd +#define __INLINE_DATA__ data + +#endif // ewarm + +//***************************************************************************** +// +// The defines required for GCC. +// +//***************************************************************************** +#if defined(gcc) + +// +// The assembly code preamble required to put the assembler into the correct +// configuration. +// + .syntax unified + .thumb + +// +// Section headers. +// +#define __LIBRARY__ @ +#define __TEXT__ .text +#define __DATA__ .data +#define __BSS__ .bss +#define __TEXT_NOROOT__ .text + +// +// Assembler nmenonics. +// +#define __ALIGN__ .balign 4 +#define __END__ .end +#define __EXPORT__ .globl +#define __IMPORT__ .extern +#define __LABEL__ : +#define __STR__ .ascii +#define __THUMB_LABEL__ .thumb_func +#define __WORD__ .word +#define __INLINE_DATA__ + +#endif // gcc + +//***************************************************************************** +// +// The defines required for RV-MDK. +// +//***************************************************************************** +#ifdef rvmdk + +// +// The assembly code preamble required to put the assembler into the correct +// configuration. +// + thumb + require8 + preserve8 + +// +// Section headers. +// +#define __LIBRARY__ ; +#define __TEXT__ area ||.text||, code, readonly, align=2 +#define __DATA__ area ||.data||, data, align=2 +#define __BSS__ area ||.bss||, noinit, align=2 +#define __TEXT_NOROOT__ area ||.text||, code, readonly, align=2 + +// +// Assembler nmenonics. +// +#define __ALIGN__ align 4 +#define __END__ end +#define __EXPORT__ export +#define __IMPORT__ import +#define __LABEL__ +#define __STR__ dcb +#define __THUMB_LABEL__ +#define __WORD__ dcd +#define __INLINE_DATA__ + +#endif // rvmdk + +//***************************************************************************** +// +// The defines required for Sourcery G++. +// +//***************************************************************************** +#if defined(sourcerygxx) + +// +// The assembly code preamble required to put the assembler into the correct +// configuration. +// + .syntax unified + .thumb + +// +// Section headers. +// +#define __LIBRARY__ @ +#define __TEXT__ .text +#define __DATA__ .data +#define __BSS__ .bss +#define __TEXT_NOROOT__ .text + +// +// Assembler nmenonics. +// +#define __ALIGN__ .balign 4 +#define __END__ .end +#define __EXPORT__ .globl +#define __IMPORT__ .extern +#define __LABEL__ : +#define __STR__ .ascii +#define __THUMB_LABEL__ .thumb_func +#define __WORD__ .word +#define __INLINE_DATA__ + +#endif // sourcerygxx + +#endif // __ASMDEF_H__ diff --git a/os/common/ext/TivaWare/inc/hw_adc.h b/os/common/ext/TivaWare/inc/hw_adc.h new file mode 100644 index 0000000..27a384f --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_adc.h @@ -0,0 +1,1306 @@ +//***************************************************************************** +// +// hw_adc.h - Macros used when accessing the ADC hardware. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_ADC_H__ +#define __HW_ADC_H__ + +//***************************************************************************** +// +// The following are defines for the ADC register offsets. +// +//***************************************************************************** +#define ADC_O_ACTSS 0x00000000 // ADC Active Sample Sequencer +#define ADC_O_RIS 0x00000004 // ADC Raw Interrupt Status +#define ADC_O_IM 0x00000008 // ADC Interrupt Mask +#define ADC_O_ISC 0x0000000C // ADC Interrupt Status and Clear +#define ADC_O_OSTAT 0x00000010 // ADC Overflow Status +#define ADC_O_EMUX 0x00000014 // ADC Event Multiplexer Select +#define ADC_O_USTAT 0x00000018 // ADC Underflow Status +#define ADC_O_TSSEL 0x0000001C // ADC Trigger Source Select +#define ADC_O_SSPRI 0x00000020 // ADC Sample Sequencer Priority +#define ADC_O_SPC 0x00000024 // ADC Sample Phase Control +#define ADC_O_PSSI 0x00000028 // ADC Processor Sample Sequence + // Initiate +#define ADC_O_SAC 0x00000030 // ADC Sample Averaging Control +#define ADC_O_DCISC 0x00000034 // ADC Digital Comparator Interrupt + // Status and Clear +#define ADC_O_CTL 0x00000038 // ADC Control +#define ADC_O_SSMUX0 0x00000040 // ADC Sample Sequence Input + // Multiplexer Select 0 +#define ADC_O_SSCTL0 0x00000044 // ADC Sample Sequence Control 0 +#define ADC_O_SSFIFO0 0x00000048 // ADC Sample Sequence Result FIFO + // 0 +#define ADC_O_SSFSTAT0 0x0000004C // ADC Sample Sequence FIFO 0 + // Status +#define ADC_O_SSOP0 0x00000050 // ADC Sample Sequence 0 Operation +#define ADC_O_SSDC0 0x00000054 // ADC Sample Sequence 0 Digital + // Comparator Select +#define ADC_O_SSEMUX0 0x00000058 // ADC Sample Sequence Extended + // Input Multiplexer Select 0 +#define ADC_O_SSTSH0 0x0000005C // ADC Sample Sequence 0 Sample and + // Hold Time +#define ADC_O_SSMUX1 0x00000060 // ADC Sample Sequence Input + // Multiplexer Select 1 +#define ADC_O_SSCTL1 0x00000064 // ADC Sample Sequence Control 1 +#define ADC_O_SSFIFO1 0x00000068 // ADC Sample Sequence Result FIFO + // 1 +#define ADC_O_SSFSTAT1 0x0000006C // ADC Sample Sequence FIFO 1 + // Status +#define ADC_O_SSOP1 0x00000070 // ADC Sample Sequence 1 Operation +#define ADC_O_SSDC1 0x00000074 // ADC Sample Sequence 1 Digital + // Comparator Select +#define ADC_O_SSEMUX1 0x00000078 // ADC Sample Sequence Extended + // Input Multiplexer Select 1 +#define ADC_O_SSTSH1 0x0000007C // ADC Sample Sequence 1 Sample and + // Hold Time +#define ADC_O_SSMUX2 0x00000080 // ADC Sample Sequence Input + // Multiplexer Select 2 +#define ADC_O_SSCTL2 0x00000084 // ADC Sample Sequence Control 2 +#define ADC_O_SSFIFO2 0x00000088 // ADC Sample Sequence Result FIFO + // 2 +#define ADC_O_SSFSTAT2 0x0000008C // ADC Sample Sequence FIFO 2 + // Status +#define ADC_O_SSOP2 0x00000090 // ADC Sample Sequence 2 Operation +#define ADC_O_SSDC2 0x00000094 // ADC Sample Sequence 2 Digital + // Comparator Select +#define ADC_O_SSEMUX2 0x00000098 // ADC Sample Sequence Extended + // Input Multiplexer Select 2 +#define ADC_O_SSTSH2 0x0000009C // ADC Sample Sequence 2 Sample and + // Hold Time +#define ADC_O_SSMUX3 0x000000A0 // ADC Sample Sequence Input + // Multiplexer Select 3 +#define ADC_O_SSCTL3 0x000000A4 // ADC Sample Sequence Control 3 +#define ADC_O_SSFIFO3 0x000000A8 // ADC Sample Sequence Result FIFO + // 3 +#define ADC_O_SSFSTAT3 0x000000AC // ADC Sample Sequence FIFO 3 + // Status +#define ADC_O_SSOP3 0x000000B0 // ADC Sample Sequence 3 Operation +#define ADC_O_SSDC3 0x000000B4 // ADC Sample Sequence 3 Digital + // Comparator Select +#define ADC_O_SSEMUX3 0x000000B8 // ADC Sample Sequence Extended + // Input Multiplexer Select 3 +#define ADC_O_SSTSH3 0x000000BC // ADC Sample Sequence 3 Sample and + // Hold Time +#define ADC_O_DCRIC 0x00000D00 // ADC Digital Comparator Reset + // Initial Conditions +#define ADC_O_DCCTL0 0x00000E00 // ADC Digital Comparator Control 0 +#define ADC_O_DCCTL1 0x00000E04 // ADC Digital Comparator Control 1 +#define ADC_O_DCCTL2 0x00000E08 // ADC Digital Comparator Control 2 +#define ADC_O_DCCTL3 0x00000E0C // ADC Digital Comparator Control 3 +#define ADC_O_DCCTL4 0x00000E10 // ADC Digital Comparator Control 4 +#define ADC_O_DCCTL5 0x00000E14 // ADC Digital Comparator Control 5 +#define ADC_O_DCCTL6 0x00000E18 // ADC Digital Comparator Control 6 +#define ADC_O_DCCTL7 0x00000E1C // ADC Digital Comparator Control 7 +#define ADC_O_DCCMP0 0x00000E40 // ADC Digital Comparator Range 0 +#define ADC_O_DCCMP1 0x00000E44 // ADC Digital Comparator Range 1 +#define ADC_O_DCCMP2 0x00000E48 // ADC Digital Comparator Range 2 +#define ADC_O_DCCMP3 0x00000E4C // ADC Digital Comparator Range 3 +#define ADC_O_DCCMP4 0x00000E50 // ADC Digital Comparator Range 4 +#define ADC_O_DCCMP5 0x00000E54 // ADC Digital Comparator Range 5 +#define ADC_O_DCCMP6 0x00000E58 // ADC Digital Comparator Range 6 +#define ADC_O_DCCMP7 0x00000E5C // ADC Digital Comparator Range 7 +#define ADC_O_PP 0x00000FC0 // ADC Peripheral Properties +#define ADC_O_PC 0x00000FC4 // ADC Peripheral Configuration +#define ADC_O_CC 0x00000FC8 // ADC Clock Configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_ACTSS register. +// +//***************************************************************************** +#define ADC_ACTSS_BUSY 0x00010000 // ADC Busy +#define ADC_ACTSS_ADEN3 0x00000800 // ADC SS3 DMA Enable +#define ADC_ACTSS_ADEN2 0x00000400 // ADC SS2 DMA Enable +#define ADC_ACTSS_ADEN1 0x00000200 // ADC SS1 DMA Enable +#define ADC_ACTSS_ADEN0 0x00000100 // ADC SS1 DMA Enable +#define ADC_ACTSS_ASEN3 0x00000008 // ADC SS3 Enable +#define ADC_ACTSS_ASEN2 0x00000004 // ADC SS2 Enable +#define ADC_ACTSS_ASEN1 0x00000002 // ADC SS1 Enable +#define ADC_ACTSS_ASEN0 0x00000001 // ADC SS0 Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_RIS register. +// +//***************************************************************************** +#define ADC_RIS_INRDC 0x00010000 // Digital Comparator Raw Interrupt + // Status +#define ADC_RIS_DMAINR3 0x00000800 // SS3 DMA Raw Interrupt Status +#define ADC_RIS_DMAINR2 0x00000400 // SS2 DMA Raw Interrupt Status +#define ADC_RIS_DMAINR1 0x00000200 // SS1 DMA Raw Interrupt Status +#define ADC_RIS_DMAINR0 0x00000100 // SS0 DMA Raw Interrupt Status +#define ADC_RIS_INR3 0x00000008 // SS3 Raw Interrupt Status +#define ADC_RIS_INR2 0x00000004 // SS2 Raw Interrupt Status +#define ADC_RIS_INR1 0x00000002 // SS1 Raw Interrupt Status +#define ADC_RIS_INR0 0x00000001 // SS0 Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_IM register. +// +//***************************************************************************** +#define ADC_IM_DCONSS3 0x00080000 // Digital Comparator Interrupt on + // SS3 +#define ADC_IM_DCONSS2 0x00040000 // Digital Comparator Interrupt on + // SS2 +#define ADC_IM_DCONSS1 0x00020000 // Digital Comparator Interrupt on + // SS1 +#define ADC_IM_DCONSS0 0x00010000 // Digital Comparator Interrupt on + // SS0 +#define ADC_IM_DMAMASK3 0x00000800 // SS3 DMA Interrupt Mask +#define ADC_IM_DMAMASK2 0x00000400 // SS2 DMA Interrupt Mask +#define ADC_IM_DMAMASK1 0x00000200 // SS1 DMA Interrupt Mask +#define ADC_IM_DMAMASK0 0x00000100 // SS0 DMA Interrupt Mask +#define ADC_IM_MASK3 0x00000008 // SS3 Interrupt Mask +#define ADC_IM_MASK2 0x00000004 // SS2 Interrupt Mask +#define ADC_IM_MASK1 0x00000002 // SS1 Interrupt Mask +#define ADC_IM_MASK0 0x00000001 // SS0 Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_ISC register. +// +//***************************************************************************** +#define ADC_ISC_DCINSS3 0x00080000 // Digital Comparator Interrupt + // Status on SS3 +#define ADC_ISC_DCINSS2 0x00040000 // Digital Comparator Interrupt + // Status on SS2 +#define ADC_ISC_DCINSS1 0x00020000 // Digital Comparator Interrupt + // Status on SS1 +#define ADC_ISC_DCINSS0 0x00010000 // Digital Comparator Interrupt + // Status on SS0 +#define ADC_ISC_DMAIN3 0x00000800 // SS3 DMA Interrupt Status and + // Clear +#define ADC_ISC_DMAIN2 0x00000400 // SS2 DMA Interrupt Status and + // Clear +#define ADC_ISC_DMAIN1 0x00000200 // SS1 DMA Interrupt Status and + // Clear +#define ADC_ISC_DMAIN0 0x00000100 // SS0 DMA Interrupt Status and + // Clear +#define ADC_ISC_IN3 0x00000008 // SS3 Interrupt Status and Clear +#define ADC_ISC_IN2 0x00000004 // SS2 Interrupt Status and Clear +#define ADC_ISC_IN1 0x00000002 // SS1 Interrupt Status and Clear +#define ADC_ISC_IN0 0x00000001 // SS0 Interrupt Status and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_OSTAT register. +// +//***************************************************************************** +#define ADC_OSTAT_OV3 0x00000008 // SS3 FIFO Overflow +#define ADC_OSTAT_OV2 0x00000004 // SS2 FIFO Overflow +#define ADC_OSTAT_OV1 0x00000002 // SS1 FIFO Overflow +#define ADC_OSTAT_OV0 0x00000001 // SS0 FIFO Overflow + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_EMUX register. +// +//***************************************************************************** +#define ADC_EMUX_EM3_M 0x0000F000 // SS3 Trigger Select +#define ADC_EMUX_EM3_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM3_COMP0 0x00001000 // Analog Comparator 0 +#define ADC_EMUX_EM3_COMP1 0x00002000 // Analog Comparator 1 +#define ADC_EMUX_EM3_COMP2 0x00003000 // Analog Comparator 2 +#define ADC_EMUX_EM3_EXTERNAL 0x00004000 // External (GPIO Pins) +#define ADC_EMUX_EM3_TIMER 0x00005000 // Timer +#define ADC_EMUX_EM3_PWM0 0x00006000 // PWM generator 0 +#define ADC_EMUX_EM3_PWM1 0x00007000 // PWM generator 1 +#define ADC_EMUX_EM3_PWM2 0x00008000 // PWM generator 2 +#define ADC_EMUX_EM3_PWM3 0x00009000 // PWM generator 3 +#define ADC_EMUX_EM3_NEVER 0x0000E000 // Never Trigger +#define ADC_EMUX_EM3_ALWAYS 0x0000F000 // Always (continuously sample) +#define ADC_EMUX_EM2_M 0x00000F00 // SS2 Trigger Select +#define ADC_EMUX_EM2_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM2_COMP0 0x00000100 // Analog Comparator 0 +#define ADC_EMUX_EM2_COMP1 0x00000200 // Analog Comparator 1 +#define ADC_EMUX_EM2_COMP2 0x00000300 // Analog Comparator 2 +#define ADC_EMUX_EM2_EXTERNAL 0x00000400 // External (GPIO Pins) +#define ADC_EMUX_EM2_TIMER 0x00000500 // Timer +#define ADC_EMUX_EM2_PWM0 0x00000600 // PWM generator 0 +#define ADC_EMUX_EM2_PWM1 0x00000700 // PWM generator 1 +#define ADC_EMUX_EM2_PWM2 0x00000800 // PWM generator 2 +#define ADC_EMUX_EM2_PWM3 0x00000900 // PWM generator 3 +#define ADC_EMUX_EM2_NEVER 0x00000E00 // Never Trigger +#define ADC_EMUX_EM2_ALWAYS 0x00000F00 // Always (continuously sample) +#define ADC_EMUX_EM1_M 0x000000F0 // SS1 Trigger Select +#define ADC_EMUX_EM1_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM1_COMP0 0x00000010 // Analog Comparator 0 +#define ADC_EMUX_EM1_COMP1 0x00000020 // Analog Comparator 1 +#define ADC_EMUX_EM1_COMP2 0x00000030 // Analog Comparator 2 +#define ADC_EMUX_EM1_EXTERNAL 0x00000040 // External (GPIO Pins) +#define ADC_EMUX_EM1_TIMER 0x00000050 // Timer +#define ADC_EMUX_EM1_PWM0 0x00000060 // PWM generator 0 +#define ADC_EMUX_EM1_PWM1 0x00000070 // PWM generator 1 +#define ADC_EMUX_EM1_PWM2 0x00000080 // PWM generator 2 +#define ADC_EMUX_EM1_PWM3 0x00000090 // PWM generator 3 +#define ADC_EMUX_EM1_NEVER 0x000000E0 // Never Trigger +#define ADC_EMUX_EM1_ALWAYS 0x000000F0 // Always (continuously sample) +#define ADC_EMUX_EM0_M 0x0000000F // SS0 Trigger Select +#define ADC_EMUX_EM0_PROCESSOR 0x00000000 // Processor (default) +#define ADC_EMUX_EM0_COMP0 0x00000001 // Analog Comparator 0 +#define ADC_EMUX_EM0_COMP1 0x00000002 // Analog Comparator 1 +#define ADC_EMUX_EM0_COMP2 0x00000003 // Analog Comparator 2 +#define ADC_EMUX_EM0_EXTERNAL 0x00000004 // External (GPIO Pins) +#define ADC_EMUX_EM0_TIMER 0x00000005 // Timer +#define ADC_EMUX_EM0_PWM0 0x00000006 // PWM generator 0 +#define ADC_EMUX_EM0_PWM1 0x00000007 // PWM generator 1 +#define ADC_EMUX_EM0_PWM2 0x00000008 // PWM generator 2 +#define ADC_EMUX_EM0_PWM3 0x00000009 // PWM generator 3 +#define ADC_EMUX_EM0_NEVER 0x0000000E // Never Trigger +#define ADC_EMUX_EM0_ALWAYS 0x0000000F // Always (continuously sample) + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_USTAT register. +// +//***************************************************************************** +#define ADC_USTAT_UV3 0x00000008 // SS3 FIFO Underflow +#define ADC_USTAT_UV2 0x00000004 // SS2 FIFO Underflow +#define ADC_USTAT_UV1 0x00000002 // SS1 FIFO Underflow +#define ADC_USTAT_UV0 0x00000001 // SS0 FIFO Underflow + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_TSSEL register. +// +//***************************************************************************** +#define ADC_TSSEL_PS3_M 0x30000000 // Generator 3 PWM Module Trigger + // Select +#define ADC_TSSEL_PS3_0 0x00000000 // Use Generator 3 (and its + // trigger) in PWM module 0 +#define ADC_TSSEL_PS3_1 0x10000000 // Use Generator 3 (and its + // trigger) in PWM module 1 +#define ADC_TSSEL_PS2_M 0x00300000 // Generator 2 PWM Module Trigger + // Select +#define ADC_TSSEL_PS2_0 0x00000000 // Use Generator 2 (and its + // trigger) in PWM module 0 +#define ADC_TSSEL_PS2_1 0x00100000 // Use Generator 2 (and its + // trigger) in PWM module 1 +#define ADC_TSSEL_PS1_M 0x00003000 // Generator 1 PWM Module Trigger + // Select +#define ADC_TSSEL_PS1_0 0x00000000 // Use Generator 1 (and its + // trigger) in PWM module 0 +#define ADC_TSSEL_PS1_1 0x00001000 // Use Generator 1 (and its + // trigger) in PWM module 1 +#define ADC_TSSEL_PS0_M 0x00000030 // Generator 0 PWM Module Trigger + // Select +#define ADC_TSSEL_PS0_0 0x00000000 // Use Generator 0 (and its + // trigger) in PWM module 0 +#define ADC_TSSEL_PS0_1 0x00000010 // Use Generator 0 (and its + // trigger) in PWM module 1 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSPRI register. +// +//***************************************************************************** +#define ADC_SSPRI_SS3_M 0x00003000 // SS3 Priority +#define ADC_SSPRI_SS2_M 0x00000300 // SS2 Priority +#define ADC_SSPRI_SS1_M 0x00000030 // SS1 Priority +#define ADC_SSPRI_SS0_M 0x00000003 // SS0 Priority + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SPC register. +// +//***************************************************************************** +#define ADC_SPC_PHASE_M 0x0000000F // Phase Difference +#define ADC_SPC_PHASE_0 0x00000000 // ADC sample lags by 0.0 +#define ADC_SPC_PHASE_22_5 0x00000001 // ADC sample lags by 22.5 +#define ADC_SPC_PHASE_45 0x00000002 // ADC sample lags by 45.0 +#define ADC_SPC_PHASE_67_5 0x00000003 // ADC sample lags by 67.5 +#define ADC_SPC_PHASE_90 0x00000004 // ADC sample lags by 90.0 +#define ADC_SPC_PHASE_112_5 0x00000005 // ADC sample lags by 112.5 +#define ADC_SPC_PHASE_135 0x00000006 // ADC sample lags by 135.0 +#define ADC_SPC_PHASE_157_5 0x00000007 // ADC sample lags by 157.5 +#define ADC_SPC_PHASE_180 0x00000008 // ADC sample lags by 180.0 +#define ADC_SPC_PHASE_202_5 0x00000009 // ADC sample lags by 202.5 +#define ADC_SPC_PHASE_225 0x0000000A // ADC sample lags by 225.0 +#define ADC_SPC_PHASE_247_5 0x0000000B // ADC sample lags by 247.5 +#define ADC_SPC_PHASE_270 0x0000000C // ADC sample lags by 270.0 +#define ADC_SPC_PHASE_292_5 0x0000000D // ADC sample lags by 292.5 +#define ADC_SPC_PHASE_315 0x0000000E // ADC sample lags by 315.0 +#define ADC_SPC_PHASE_337_5 0x0000000F // ADC sample lags by 337.5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_PSSI register. +// +//***************************************************************************** +#define ADC_PSSI_GSYNC 0x80000000 // Global Synchronize +#define ADC_PSSI_SYNCWAIT 0x08000000 // Synchronize Wait +#define ADC_PSSI_SS3 0x00000008 // SS3 Initiate +#define ADC_PSSI_SS2 0x00000004 // SS2 Initiate +#define ADC_PSSI_SS1 0x00000002 // SS1 Initiate +#define ADC_PSSI_SS0 0x00000001 // SS0 Initiate + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SAC register. +// +//***************************************************************************** +#define ADC_SAC_AVG_M 0x00000007 // Hardware Averaging Control +#define ADC_SAC_AVG_OFF 0x00000000 // No hardware oversampling +#define ADC_SAC_AVG_2X 0x00000001 // 2x hardware oversampling +#define ADC_SAC_AVG_4X 0x00000002 // 4x hardware oversampling +#define ADC_SAC_AVG_8X 0x00000003 // 8x hardware oversampling +#define ADC_SAC_AVG_16X 0x00000004 // 16x hardware oversampling +#define ADC_SAC_AVG_32X 0x00000005 // 32x hardware oversampling +#define ADC_SAC_AVG_64X 0x00000006 // 64x hardware oversampling + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCISC register. +// +//***************************************************************************** +#define ADC_DCISC_DCINT7 0x00000080 // Digital Comparator 7 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT6 0x00000040 // Digital Comparator 6 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT5 0x00000020 // Digital Comparator 5 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT4 0x00000010 // Digital Comparator 4 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT3 0x00000008 // Digital Comparator 3 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT2 0x00000004 // Digital Comparator 2 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT1 0x00000002 // Digital Comparator 1 Interrupt + // Status and Clear +#define ADC_DCISC_DCINT0 0x00000001 // Digital Comparator 0 Interrupt + // Status and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_CTL register. +// +//***************************************************************************** +#define ADC_CTL_VREF_M 0x00000003 // Voltage Reference Select +#define ADC_CTL_VREF_INTERNAL 0x00000000 // VDDA and GNDA are the voltage + // references +#define ADC_CTL_VREF_EXT_3V 0x00000001 // The external VREFA+ and VREFA- + // inputs are the voltage + // references + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX0 register. +// +//***************************************************************************** +#define ADC_SSMUX0_MUX7_M 0xF0000000 // 8th Sample Input Select +#define ADC_SSMUX0_MUX6_M 0x0F000000 // 7th Sample Input Select +#define ADC_SSMUX0_MUX5_M 0x00F00000 // 6th Sample Input Select +#define ADC_SSMUX0_MUX4_M 0x000F0000 // 5th Sample Input Select +#define ADC_SSMUX0_MUX3_M 0x0000F000 // 4th Sample Input Select +#define ADC_SSMUX0_MUX2_M 0x00000F00 // 3rd Sample Input Select +#define ADC_SSMUX0_MUX1_M 0x000000F0 // 2nd Sample Input Select +#define ADC_SSMUX0_MUX0_M 0x0000000F // 1st Sample Input Select +#define ADC_SSMUX0_MUX7_S 28 +#define ADC_SSMUX0_MUX6_S 24 +#define ADC_SSMUX0_MUX5_S 20 +#define ADC_SSMUX0_MUX4_S 16 +#define ADC_SSMUX0_MUX3_S 12 +#define ADC_SSMUX0_MUX2_S 8 +#define ADC_SSMUX0_MUX1_S 4 +#define ADC_SSMUX0_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL0 register. +// +//***************************************************************************** +#define ADC_SSCTL0_TS7 0x80000000 // 8th Sample Temp Sensor Select +#define ADC_SSCTL0_IE7 0x40000000 // 8th Sample Interrupt Enable +#define ADC_SSCTL0_END7 0x20000000 // 8th Sample is End of Sequence +#define ADC_SSCTL0_D7 0x10000000 // 8th Sample Differential Input + // Select +#define ADC_SSCTL0_TS6 0x08000000 // 7th Sample Temp Sensor Select +#define ADC_SSCTL0_IE6 0x04000000 // 7th Sample Interrupt Enable +#define ADC_SSCTL0_END6 0x02000000 // 7th Sample is End of Sequence +#define ADC_SSCTL0_D6 0x01000000 // 7th Sample Differential Input + // Select +#define ADC_SSCTL0_TS5 0x00800000 // 6th Sample Temp Sensor Select +#define ADC_SSCTL0_IE5 0x00400000 // 6th Sample Interrupt Enable +#define ADC_SSCTL0_END5 0x00200000 // 6th Sample is End of Sequence +#define ADC_SSCTL0_D5 0x00100000 // 6th Sample Differential Input + // Select +#define ADC_SSCTL0_TS4 0x00080000 // 5th Sample Temp Sensor Select +#define ADC_SSCTL0_IE4 0x00040000 // 5th Sample Interrupt Enable +#define ADC_SSCTL0_END4 0x00020000 // 5th Sample is End of Sequence +#define ADC_SSCTL0_D4 0x00010000 // 5th Sample Differential Input + // Select +#define ADC_SSCTL0_TS3 0x00008000 // 4th Sample Temp Sensor Select +#define ADC_SSCTL0_IE3 0x00004000 // 4th Sample Interrupt Enable +#define ADC_SSCTL0_END3 0x00002000 // 4th Sample is End of Sequence +#define ADC_SSCTL0_D3 0x00001000 // 4th Sample Differential Input + // Select +#define ADC_SSCTL0_TS2 0x00000800 // 3rd Sample Temp Sensor Select +#define ADC_SSCTL0_IE2 0x00000400 // 3rd Sample Interrupt Enable +#define ADC_SSCTL0_END2 0x00000200 // 3rd Sample is End of Sequence +#define ADC_SSCTL0_D2 0x00000100 // 3rd Sample Differential Input + // Select +#define ADC_SSCTL0_TS1 0x00000080 // 2nd Sample Temp Sensor Select +#define ADC_SSCTL0_IE1 0x00000040 // 2nd Sample Interrupt Enable +#define ADC_SSCTL0_END1 0x00000020 // 2nd Sample is End of Sequence +#define ADC_SSCTL0_D1 0x00000010 // 2nd Sample Differential Input + // Select +#define ADC_SSCTL0_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL0_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL0_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL0_D0 0x00000001 // 1st Sample Differential Input + // Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO0 register. +// +//***************************************************************************** +#define ADC_SSFIFO0_DATA_M 0x00000FFF // Conversion Result Data +#define ADC_SSFIFO0_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT0 register. +// +//***************************************************************************** +#define ADC_SSFSTAT0_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT0_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT0_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT0_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT0_HPTR_S 4 +#define ADC_SSFSTAT0_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSOP0 register. +// +//***************************************************************************** +#define ADC_SSOP0_S7DCOP 0x10000000 // Sample 7 Digital Comparator + // Operation +#define ADC_SSOP0_S6DCOP 0x01000000 // Sample 6 Digital Comparator + // Operation +#define ADC_SSOP0_S5DCOP 0x00100000 // Sample 5 Digital Comparator + // Operation +#define ADC_SSOP0_S4DCOP 0x00010000 // Sample 4 Digital Comparator + // Operation +#define ADC_SSOP0_S3DCOP 0x00001000 // Sample 3 Digital Comparator + // Operation +#define ADC_SSOP0_S2DCOP 0x00000100 // Sample 2 Digital Comparator + // Operation +#define ADC_SSOP0_S1DCOP 0x00000010 // Sample 1 Digital Comparator + // Operation +#define ADC_SSOP0_S0DCOP 0x00000001 // Sample 0 Digital Comparator + // Operation + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSDC0 register. +// +//***************************************************************************** +#define ADC_SSDC0_S7DCSEL_M 0xF0000000 // Sample 7 Digital Comparator + // Select +#define ADC_SSDC0_S6DCSEL_M 0x0F000000 // Sample 6 Digital Comparator + // Select +#define ADC_SSDC0_S5DCSEL_M 0x00F00000 // Sample 5 Digital Comparator + // Select +#define ADC_SSDC0_S4DCSEL_M 0x000F0000 // Sample 4 Digital Comparator + // Select +#define ADC_SSDC0_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator + // Select +#define ADC_SSDC0_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator + // Select +#define ADC_SSDC0_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator + // Select +#define ADC_SSDC0_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator + // Select +#define ADC_SSDC0_S6DCSEL_S 24 +#define ADC_SSDC0_S5DCSEL_S 20 +#define ADC_SSDC0_S4DCSEL_S 16 +#define ADC_SSDC0_S3DCSEL_S 12 +#define ADC_SSDC0_S2DCSEL_S 8 +#define ADC_SSDC0_S1DCSEL_S 4 +#define ADC_SSDC0_S0DCSEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSEMUX0 register. +// +//***************************************************************************** +#define ADC_SSEMUX0_EMUX7 0x10000000 // 8th Sample Input Select (Upper + // Bit) +#define ADC_SSEMUX0_EMUX6 0x01000000 // 7th Sample Input Select (Upper + // Bit) +#define ADC_SSEMUX0_EMUX5 0x00100000 // 6th Sample Input Select (Upper + // Bit) +#define ADC_SSEMUX0_EMUX4 0x00010000 // 5th Sample Input Select (Upper + // Bit) +#define ADC_SSEMUX0_EMUX3 0x00001000 // 4th Sample Input Select (Upper + // Bit) +#define ADC_SSEMUX0_EMUX2 0x00000100 // 3rd Sample Input Select (Upper + // Bit) +#define ADC_SSEMUX0_EMUX1 0x00000010 // 2th Sample Input Select (Upper + // Bit) +#define ADC_SSEMUX0_EMUX0 0x00000001 // 1st Sample Input Select (Upper + // Bit) + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSTSH0 register. +// +//***************************************************************************** +#define ADC_SSTSH0_TSH7_M 0xF0000000 // 8th Sample and Hold Period + // Select +#define ADC_SSTSH0_TSH6_M 0x0F000000 // 7th Sample and Hold Period + // Select +#define ADC_SSTSH0_TSH5_M 0x00F00000 // 6th Sample and Hold Period + // Select +#define ADC_SSTSH0_TSH4_M 0x000F0000 // 5th Sample and Hold Period + // Select +#define ADC_SSTSH0_TSH3_M 0x0000F000 // 4th Sample and Hold Period + // Select +#define ADC_SSTSH0_TSH2_M 0x00000F00 // 3rd Sample and Hold Period + // Select +#define ADC_SSTSH0_TSH1_M 0x000000F0 // 2nd Sample and Hold Period + // Select +#define ADC_SSTSH0_TSH0_M 0x0000000F // 1st Sample and Hold Period + // Select +#define ADC_SSTSH0_TSH7_S 28 +#define ADC_SSTSH0_TSH6_S 24 +#define ADC_SSTSH0_TSH5_S 20 +#define ADC_SSTSH0_TSH4_S 16 +#define ADC_SSTSH0_TSH3_S 12 +#define ADC_SSTSH0_TSH2_S 8 +#define ADC_SSTSH0_TSH1_S 4 +#define ADC_SSTSH0_TSH0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX1 register. +// +//***************************************************************************** +#define ADC_SSMUX1_MUX3_M 0x0000F000 // 4th Sample Input Select +#define ADC_SSMUX1_MUX2_M 0x00000F00 // 3rd Sample Input Select +#define ADC_SSMUX1_MUX1_M 0x000000F0 // 2nd Sample Input Select +#define ADC_SSMUX1_MUX0_M 0x0000000F // 1st Sample Input Select +#define ADC_SSMUX1_MUX3_S 12 +#define ADC_SSMUX1_MUX2_S 8 +#define ADC_SSMUX1_MUX1_S 4 +#define ADC_SSMUX1_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL1 register. +// +//***************************************************************************** +#define ADC_SSCTL1_TS3 0x00008000 // 4th Sample Temp Sensor Select +#define ADC_SSCTL1_IE3 0x00004000 // 4th Sample Interrupt Enable +#define ADC_SSCTL1_END3 0x00002000 // 4th Sample is End of Sequence +#define ADC_SSCTL1_D3 0x00001000 // 4th Sample Differential Input + // Select +#define ADC_SSCTL1_TS2 0x00000800 // 3rd Sample Temp Sensor Select +#define ADC_SSCTL1_IE2 0x00000400 // 3rd Sample Interrupt Enable +#define ADC_SSCTL1_END2 0x00000200 // 3rd Sample is End of Sequence +#define ADC_SSCTL1_D2 0x00000100 // 3rd Sample Differential Input + // Select +#define ADC_SSCTL1_TS1 0x00000080 // 2nd Sample Temp Sensor Select +#define ADC_SSCTL1_IE1 0x00000040 // 2nd Sample Interrupt Enable +#define ADC_SSCTL1_END1 0x00000020 // 2nd Sample is End of Sequence +#define ADC_SSCTL1_D1 0x00000010 // 2nd Sample Differential Input + // Select +#define ADC_SSCTL1_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL1_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL1_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL1_D0 0x00000001 // 1st Sample Differential Input + // Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO1 register. +// +//***************************************************************************** +#define ADC_SSFIFO1_DATA_M 0x00000FFF // Conversion Result Data +#define ADC_SSFIFO1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT1 register. +// +//***************************************************************************** +#define ADC_SSFSTAT1_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT1_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT1_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT1_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT1_HPTR_S 4 +#define ADC_SSFSTAT1_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSOP1 register. +// +//***************************************************************************** +#define ADC_SSOP1_S3DCOP 0x00001000 // Sample 3 Digital Comparator + // Operation +#define ADC_SSOP1_S2DCOP 0x00000100 // Sample 2 Digital Comparator + // Operation +#define ADC_SSOP1_S1DCOP 0x00000010 // Sample 1 Digital Comparator + // Operation +#define ADC_SSOP1_S0DCOP 0x00000001 // Sample 0 Digital Comparator + // Operation + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSDC1 register. +// +//***************************************************************************** +#define ADC_SSDC1_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator + // Select +#define ADC_SSDC1_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator + // Select +#define ADC_SSDC1_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator + // Select +#define ADC_SSDC1_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator + // Select +#define ADC_SSDC1_S2DCSEL_S 8 +#define ADC_SSDC1_S1DCSEL_S 4 +#define ADC_SSDC1_S0DCSEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSEMUX1 register. +// +//***************************************************************************** +#define ADC_SSEMUX1_EMUX3 0x00001000 // 4th Sample Input Select (Upper + // Bit) +#define ADC_SSEMUX1_EMUX2 0x00000100 // 3rd Sample Input Select (Upper + // Bit) +#define ADC_SSEMUX1_EMUX1 0x00000010 // 2th Sample Input Select (Upper + // Bit) +#define ADC_SSEMUX1_EMUX0 0x00000001 // 1st Sample Input Select (Upper + // Bit) + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSTSH1 register. +// +//***************************************************************************** +#define ADC_SSTSH1_TSH3_M 0x0000F000 // 4th Sample and Hold Period + // Select +#define ADC_SSTSH1_TSH2_M 0x00000F00 // 3rd Sample and Hold Period + // Select +#define ADC_SSTSH1_TSH1_M 0x000000F0 // 2nd Sample and Hold Period + // Select +#define ADC_SSTSH1_TSH0_M 0x0000000F // 1st Sample and Hold Period + // Select +#define ADC_SSTSH1_TSH3_S 12 +#define ADC_SSTSH1_TSH2_S 8 +#define ADC_SSTSH1_TSH1_S 4 +#define ADC_SSTSH1_TSH0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX2 register. +// +//***************************************************************************** +#define ADC_SSMUX2_MUX3_M 0x0000F000 // 4th Sample Input Select +#define ADC_SSMUX2_MUX2_M 0x00000F00 // 3rd Sample Input Select +#define ADC_SSMUX2_MUX1_M 0x000000F0 // 2nd Sample Input Select +#define ADC_SSMUX2_MUX0_M 0x0000000F // 1st Sample Input Select +#define ADC_SSMUX2_MUX3_S 12 +#define ADC_SSMUX2_MUX2_S 8 +#define ADC_SSMUX2_MUX1_S 4 +#define ADC_SSMUX2_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL2 register. +// +//***************************************************************************** +#define ADC_SSCTL2_TS3 0x00008000 // 4th Sample Temp Sensor Select +#define ADC_SSCTL2_IE3 0x00004000 // 4th Sample Interrupt Enable +#define ADC_SSCTL2_END3 0x00002000 // 4th Sample is End of Sequence +#define ADC_SSCTL2_D3 0x00001000 // 4th Sample Differential Input + // Select +#define ADC_SSCTL2_TS2 0x00000800 // 3rd Sample Temp Sensor Select +#define ADC_SSCTL2_IE2 0x00000400 // 3rd Sample Interrupt Enable +#define ADC_SSCTL2_END2 0x00000200 // 3rd Sample is End of Sequence +#define ADC_SSCTL2_D2 0x00000100 // 3rd Sample Differential Input + // Select +#define ADC_SSCTL2_TS1 0x00000080 // 2nd Sample Temp Sensor Select +#define ADC_SSCTL2_IE1 0x00000040 // 2nd Sample Interrupt Enable +#define ADC_SSCTL2_END1 0x00000020 // 2nd Sample is End of Sequence +#define ADC_SSCTL2_D1 0x00000010 // 2nd Sample Differential Input + // Select +#define ADC_SSCTL2_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL2_IE0 0x00000004 // 1st Sample Interrupt Enable +#define ADC_SSCTL2_END0 0x00000002 // 1st Sample is End of Sequence +#define ADC_SSCTL2_D0 0x00000001 // 1st Sample Differential Input + // Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO2 register. +// +//***************************************************************************** +#define ADC_SSFIFO2_DATA_M 0x00000FFF // Conversion Result Data +#define ADC_SSFIFO2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT2 register. +// +//***************************************************************************** +#define ADC_SSFSTAT2_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT2_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT2_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT2_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT2_HPTR_S 4 +#define ADC_SSFSTAT2_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSOP2 register. +// +//***************************************************************************** +#define ADC_SSOP2_S3DCOP 0x00001000 // Sample 3 Digital Comparator + // Operation +#define ADC_SSOP2_S2DCOP 0x00000100 // Sample 2 Digital Comparator + // Operation +#define ADC_SSOP2_S1DCOP 0x00000010 // Sample 1 Digital Comparator + // Operation +#define ADC_SSOP2_S0DCOP 0x00000001 // Sample 0 Digital Comparator + // Operation + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSDC2 register. +// +//***************************************************************************** +#define ADC_SSDC2_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator + // Select +#define ADC_SSDC2_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator + // Select +#define ADC_SSDC2_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator + // Select +#define ADC_SSDC2_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator + // Select +#define ADC_SSDC2_S2DCSEL_S 8 +#define ADC_SSDC2_S1DCSEL_S 4 +#define ADC_SSDC2_S0DCSEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSEMUX2 register. +// +//***************************************************************************** +#define ADC_SSEMUX2_EMUX3 0x00001000 // 4th Sample Input Select (Upper + // Bit) +#define ADC_SSEMUX2_EMUX2 0x00000100 // 3rd Sample Input Select (Upper + // Bit) +#define ADC_SSEMUX2_EMUX1 0x00000010 // 2th Sample Input Select (Upper + // Bit) +#define ADC_SSEMUX2_EMUX0 0x00000001 // 1st Sample Input Select (Upper + // Bit) + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSTSH2 register. +// +//***************************************************************************** +#define ADC_SSTSH2_TSH3_M 0x0000F000 // 4th Sample and Hold Period + // Select +#define ADC_SSTSH2_TSH2_M 0x00000F00 // 3rd Sample and Hold Period + // Select +#define ADC_SSTSH2_TSH1_M 0x000000F0 // 2nd Sample and Hold Period + // Select +#define ADC_SSTSH2_TSH0_M 0x0000000F // 1st Sample and Hold Period + // Select +#define ADC_SSTSH2_TSH3_S 12 +#define ADC_SSTSH2_TSH2_S 8 +#define ADC_SSTSH2_TSH1_S 4 +#define ADC_SSTSH2_TSH0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSMUX3 register. +// +//***************************************************************************** +#define ADC_SSMUX3_MUX0_M 0x0000000F // 1st Sample Input Select +#define ADC_SSMUX3_MUX0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSCTL3 register. +// +//***************************************************************************** +#define ADC_SSCTL3_TS0 0x00000008 // 1st Sample Temp Sensor Select +#define ADC_SSCTL3_IE0 0x00000004 // Sample Interrupt Enable +#define ADC_SSCTL3_END0 0x00000002 // End of Sequence +#define ADC_SSCTL3_D0 0x00000001 // Sample Differential Input Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFIFO3 register. +// +//***************************************************************************** +#define ADC_SSFIFO3_DATA_M 0x00000FFF // Conversion Result Data +#define ADC_SSFIFO3_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSFSTAT3 register. +// +//***************************************************************************** +#define ADC_SSFSTAT3_FULL 0x00001000 // FIFO Full +#define ADC_SSFSTAT3_EMPTY 0x00000100 // FIFO Empty +#define ADC_SSFSTAT3_HPTR_M 0x000000F0 // FIFO Head Pointer +#define ADC_SSFSTAT3_TPTR_M 0x0000000F // FIFO Tail Pointer +#define ADC_SSFSTAT3_HPTR_S 4 +#define ADC_SSFSTAT3_TPTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSOP3 register. +// +//***************************************************************************** +#define ADC_SSOP3_S0DCOP 0x00000001 // Sample 0 Digital Comparator + // Operation + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSDC3 register. +// +//***************************************************************************** +#define ADC_SSDC3_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator + // Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSEMUX3 register. +// +//***************************************************************************** +#define ADC_SSEMUX3_EMUX0 0x00000001 // 1st Sample Input Select (Upper + // Bit) + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_SSTSH3 register. +// +//***************************************************************************** +#define ADC_SSTSH3_TSH0_M 0x0000000F // 1st Sample and Hold Period + // Select +#define ADC_SSTSH3_TSH0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCRIC register. +// +//***************************************************************************** +#define ADC_DCRIC_DCTRIG7 0x00800000 // Digital Comparator Trigger 7 +#define ADC_DCRIC_DCTRIG6 0x00400000 // Digital Comparator Trigger 6 +#define ADC_DCRIC_DCTRIG5 0x00200000 // Digital Comparator Trigger 5 +#define ADC_DCRIC_DCTRIG4 0x00100000 // Digital Comparator Trigger 4 +#define ADC_DCRIC_DCTRIG3 0x00080000 // Digital Comparator Trigger 3 +#define ADC_DCRIC_DCTRIG2 0x00040000 // Digital Comparator Trigger 2 +#define ADC_DCRIC_DCTRIG1 0x00020000 // Digital Comparator Trigger 1 +#define ADC_DCRIC_DCTRIG0 0x00010000 // Digital Comparator Trigger 0 +#define ADC_DCRIC_DCINT7 0x00000080 // Digital Comparator Interrupt 7 +#define ADC_DCRIC_DCINT6 0x00000040 // Digital Comparator Interrupt 6 +#define ADC_DCRIC_DCINT5 0x00000020 // Digital Comparator Interrupt 5 +#define ADC_DCRIC_DCINT4 0x00000010 // Digital Comparator Interrupt 4 +#define ADC_DCRIC_DCINT3 0x00000008 // Digital Comparator Interrupt 3 +#define ADC_DCRIC_DCINT2 0x00000004 // Digital Comparator Interrupt 2 +#define ADC_DCRIC_DCINT1 0x00000002 // Digital Comparator Interrupt 1 +#define ADC_DCRIC_DCINT0 0x00000001 // Digital Comparator Interrupt 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL0 register. +// +//***************************************************************************** +#define ADC_DCCTL0_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL0_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL0_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL0_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL0_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL0_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL0_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL0_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL0_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL0_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL0_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL0_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL0_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL0_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL0_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL0_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL0_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL0_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL0_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL0_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL1 register. +// +//***************************************************************************** +#define ADC_DCCTL1_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL1_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL1_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL1_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL1_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL1_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL1_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL1_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL1_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL1_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL1_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL1_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL1_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL1_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL1_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL1_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL1_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL1_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL1_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL1_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL2 register. +// +//***************************************************************************** +#define ADC_DCCTL2_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL2_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL2_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL2_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL2_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL2_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL2_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL2_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL2_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL2_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL2_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL2_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL2_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL2_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL2_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL2_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL2_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL2_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL2_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL2_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL3 register. +// +//***************************************************************************** +#define ADC_DCCTL3_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL3_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL3_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL3_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL3_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL3_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL3_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL3_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL3_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL3_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL3_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL3_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL3_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL3_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL3_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL3_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL3_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL3_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL3_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL3_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL4 register. +// +//***************************************************************************** +#define ADC_DCCTL4_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL4_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL4_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL4_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL4_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL4_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL4_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL4_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL4_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL4_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL4_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL4_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL4_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL4_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL4_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL4_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL4_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL4_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL4_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL4_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL5 register. +// +//***************************************************************************** +#define ADC_DCCTL5_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL5_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL5_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL5_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL5_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL5_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL5_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL5_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL5_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL5_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL5_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL5_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL5_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL5_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL5_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL5_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL5_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL5_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL5_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL5_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL6 register. +// +//***************************************************************************** +#define ADC_DCCTL6_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL6_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL6_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL6_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL6_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL6_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL6_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL6_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL6_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL6_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL6_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL6_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL6_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL6_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL6_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL6_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL6_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL6_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL6_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL6_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCTL7 register. +// +//***************************************************************************** +#define ADC_DCCTL7_CTE 0x00001000 // Comparison Trigger Enable +#define ADC_DCCTL7_CTC_M 0x00000C00 // Comparison Trigger Condition +#define ADC_DCCTL7_CTC_LOW 0x00000000 // Low Band +#define ADC_DCCTL7_CTC_MID 0x00000400 // Mid Band +#define ADC_DCCTL7_CTC_HIGH 0x00000C00 // High Band +#define ADC_DCCTL7_CTM_M 0x00000300 // Comparison Trigger Mode +#define ADC_DCCTL7_CTM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL7_CTM_ONCE 0x00000100 // Once +#define ADC_DCCTL7_CTM_HALWAYS 0x00000200 // Hysteresis Always +#define ADC_DCCTL7_CTM_HONCE 0x00000300 // Hysteresis Once +#define ADC_DCCTL7_CIE 0x00000010 // Comparison Interrupt Enable +#define ADC_DCCTL7_CIC_M 0x0000000C // Comparison Interrupt Condition +#define ADC_DCCTL7_CIC_LOW 0x00000000 // Low Band +#define ADC_DCCTL7_CIC_MID 0x00000004 // Mid Band +#define ADC_DCCTL7_CIC_HIGH 0x0000000C // High Band +#define ADC_DCCTL7_CIM_M 0x00000003 // Comparison Interrupt Mode +#define ADC_DCCTL7_CIM_ALWAYS 0x00000000 // Always +#define ADC_DCCTL7_CIM_ONCE 0x00000001 // Once +#define ADC_DCCTL7_CIM_HALWAYS 0x00000002 // Hysteresis Always +#define ADC_DCCTL7_CIM_HONCE 0x00000003 // Hysteresis Once + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP0 register. +// +//***************************************************************************** +#define ADC_DCCMP0_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP0_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP0_COMP1_S 16 +#define ADC_DCCMP0_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP1 register. +// +//***************************************************************************** +#define ADC_DCCMP1_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP1_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP1_COMP1_S 16 +#define ADC_DCCMP1_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP2 register. +// +//***************************************************************************** +#define ADC_DCCMP2_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP2_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP2_COMP1_S 16 +#define ADC_DCCMP2_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP3 register. +// +//***************************************************************************** +#define ADC_DCCMP3_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP3_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP3_COMP1_S 16 +#define ADC_DCCMP3_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP4 register. +// +//***************************************************************************** +#define ADC_DCCMP4_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP4_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP4_COMP1_S 16 +#define ADC_DCCMP4_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP5 register. +// +//***************************************************************************** +#define ADC_DCCMP5_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP5_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP5_COMP1_S 16 +#define ADC_DCCMP5_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP6 register. +// +//***************************************************************************** +#define ADC_DCCMP6_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP6_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP6_COMP1_S 16 +#define ADC_DCCMP6_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_DCCMP7 register. +// +//***************************************************************************** +#define ADC_DCCMP7_COMP1_M 0x0FFF0000 // Compare 1 +#define ADC_DCCMP7_COMP0_M 0x00000FFF // Compare 0 +#define ADC_DCCMP7_COMP1_S 16 +#define ADC_DCCMP7_COMP0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_PP register. +// +//***************************************************************************** +#define ADC_PP_APSHT 0x01000000 // Application-Programmable + // Sample-and-Hold Time +#define ADC_PP_TS 0x00800000 // Temperature Sensor +#define ADC_PP_RSL_M 0x007C0000 // Resolution +#define ADC_PP_TYPE_M 0x00030000 // ADC Architecture +#define ADC_PP_TYPE_SAR 0x00000000 // SAR +#define ADC_PP_DC_M 0x0000FC00 // Digital Comparator Count +#define ADC_PP_CH_M 0x000003F0 // ADC Channel Count +#define ADC_PP_MCR_M 0x0000000F // Maximum Conversion Rate +#define ADC_PP_MCR_FULL 0x00000007 // Full conversion rate (FCONV) as + // defined by TADC and NSH +#define ADC_PP_MSR_M 0x0000000F // Maximum ADC Sample Rate +#define ADC_PP_MSR_125K 0x00000001 // 125 ksps +#define ADC_PP_MSR_250K 0x00000003 // 250 ksps +#define ADC_PP_MSR_500K 0x00000005 // 500 ksps +#define ADC_PP_MSR_1M 0x00000007 // 1 Msps +#define ADC_PP_RSL_S 18 +#define ADC_PP_DC_S 10 +#define ADC_PP_CH_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_PC register. +// +//***************************************************************************** +#define ADC_PC_SR_M 0x0000000F // ADC Sample Rate +#define ADC_PC_SR_125K 0x00000001 // 125 ksps +#define ADC_PC_SR_250K 0x00000003 // 250 ksps +#define ADC_PC_SR_500K 0x00000005 // 500 ksps +#define ADC_PC_SR_1M 0x00000007 // 1 Msps +#define ADC_PC_MCR_M 0x0000000F // Conversion Rate +#define ADC_PC_MCR_1_8 0x00000001 // Eighth conversion rate. After a + // conversion completes, the logic + // pauses for 112 TADC periods + // before starting the next + // conversion +#define ADC_PC_MCR_1_4 0x00000003 // Quarter conversion rate. After a + // conversion completes, the logic + // pauses for 48 TADC periods + // before starting the next + // conversion +#define ADC_PC_MCR_1_2 0x00000005 // Half conversion rate. After a + // conversion completes, the logic + // pauses for 16 TADC periods + // before starting the next + // conversion +#define ADC_PC_MCR_FULL 0x00000007 // Full conversion rate (FCONV) as + // defined by TADC and NSH + +//***************************************************************************** +// +// The following are defines for the bit fields in the ADC_O_CC register. +// +//***************************************************************************** +#define ADC_CC_CLKDIV_M 0x000003F0 // PLL VCO Clock Divisor +#define ADC_CC_CS_M 0x0000000F // ADC Clock Source +#define ADC_CC_CS_SYSPLL 0x00000000 // PLL VCO divided by CLKDIV +#define ADC_CC_CS_PIOSC 0x00000001 // PIOSC +#define ADC_CC_CS_MOSC 0x00000002 // MOSC +#define ADC_CC_CLKDIV_S 4 + +#endif // __HW_ADC_H__ diff --git a/os/common/ext/TivaWare/inc/hw_aes.h b/os/common/ext/TivaWare/inc/hw_aes.h new file mode 100644 index 0000000..49dda1e --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_aes.h @@ -0,0 +1,545 @@ +//***************************************************************************** +// +// hw_aes.h - Macros used when accessing the AES hardware. +// +// Copyright (c) 2012-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_AES_H__ +#define __HW_AES_H__ + +//***************************************************************************** +// +// The following are defines for the AES register offsets. +// +//***************************************************************************** +#define AES_O_KEY2_6 0x00000000 // AES Key 2_6 +#define AES_O_KEY2_7 0x00000004 // AES Key 2_7 +#define AES_O_KEY2_4 0x00000008 // AES Key 2_4 +#define AES_O_KEY2_5 0x0000000C // AES Key 2_5 +#define AES_O_KEY2_2 0x00000010 // AES Key 2_2 +#define AES_O_KEY2_3 0x00000014 // AES Key 2_3 +#define AES_O_KEY2_0 0x00000018 // AES Key 2_0 +#define AES_O_KEY2_1 0x0000001C // AES Key 2_1 +#define AES_O_KEY1_6 0x00000020 // AES Key 1_6 +#define AES_O_KEY1_7 0x00000024 // AES Key 1_7 +#define AES_O_KEY1_4 0x00000028 // AES Key 1_4 +#define AES_O_KEY1_5 0x0000002C // AES Key 1_5 +#define AES_O_KEY1_2 0x00000030 // AES Key 1_2 +#define AES_O_KEY1_3 0x00000034 // AES Key 1_3 +#define AES_O_KEY1_0 0x00000038 // AES Key 1_0 +#define AES_O_KEY1_1 0x0000003C // AES Key 1_1 +#define AES_O_IV_IN_0 0x00000040 // AES Initialization Vector Input + // 0 +#define AES_O_IV_IN_1 0x00000044 // AES Initialization Vector Input + // 1 +#define AES_O_IV_IN_2 0x00000048 // AES Initialization Vector Input + // 2 +#define AES_O_IV_IN_3 0x0000004C // AES Initialization Vector Input + // 3 +#define AES_O_CTRL 0x00000050 // AES Control +#define AES_O_C_LENGTH_0 0x00000054 // AES Crypto Data Length 0 +#define AES_O_C_LENGTH_1 0x00000058 // AES Crypto Data Length 1 +#define AES_O_AUTH_LENGTH 0x0000005C // AES Authentication Data Length +#define AES_O_DATA_IN_0 0x00000060 // AES Data RW Plaintext/Ciphertext + // 0 +#define AES_O_DATA_IN_1 0x00000064 // AES Data RW Plaintext/Ciphertext + // 1 +#define AES_O_DATA_IN_2 0x00000068 // AES Data RW Plaintext/Ciphertext + // 2 +#define AES_O_DATA_IN_3 0x0000006C // AES Data RW Plaintext/Ciphertext + // 3 +#define AES_O_TAG_OUT_0 0x00000070 // AES Hash Tag Out 0 +#define AES_O_TAG_OUT_1 0x00000074 // AES Hash Tag Out 1 +#define AES_O_TAG_OUT_2 0x00000078 // AES Hash Tag Out 2 +#define AES_O_TAG_OUT_3 0x0000007C // AES Hash Tag Out 3 +#define AES_O_REVISION 0x00000080 // AES IP Revision Identifier +#define AES_O_SYSCONFIG 0x00000084 // AES System Configuration +#define AES_O_SYSSTATUS 0x00000088 // AES System Status +#define AES_O_IRQSTATUS 0x0000008C // AES Interrupt Status +#define AES_O_IRQENABLE 0x00000090 // AES Interrupt Enable +#define AES_O_DIRTYBITS 0x00000094 // AES Dirty Bits +#define AES_O_DMAIM 0xFFFFA020 // AES DMA Interrupt Mask +#define AES_O_DMARIS 0xFFFFA024 // AES DMA Raw Interrupt Status +#define AES_O_DMAMIS 0xFFFFA028 // AES DMA Masked Interrupt Status +#define AES_O_DMAIC 0xFFFFA02C // AES DMA Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY2_6 register. +// +//***************************************************************************** +#define AES_KEY2_6_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY2_6_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY2_7 register. +// +//***************************************************************************** +#define AES_KEY2_7_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY2_7_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY2_4 register. +// +//***************************************************************************** +#define AES_KEY2_4_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY2_4_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY2_5 register. +// +//***************************************************************************** +#define AES_KEY2_5_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY2_5_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY2_2 register. +// +//***************************************************************************** +#define AES_KEY2_2_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY2_2_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY2_3 register. +// +//***************************************************************************** +#define AES_KEY2_3_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY2_3_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY2_0 register. +// +//***************************************************************************** +#define AES_KEY2_0_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY2_0_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY2_1 register. +// +//***************************************************************************** +#define AES_KEY2_1_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY2_1_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY1_6 register. +// +//***************************************************************************** +#define AES_KEY1_6_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY1_6_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY1_7 register. +// +//***************************************************************************** +#define AES_KEY1_7_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY1_7_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY1_4 register. +// +//***************************************************************************** +#define AES_KEY1_4_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY1_4_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY1_5 register. +// +//***************************************************************************** +#define AES_KEY1_5_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY1_5_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY1_2 register. +// +//***************************************************************************** +#define AES_KEY1_2_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY1_2_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY1_3 register. +// +//***************************************************************************** +#define AES_KEY1_3_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY1_3_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY1_0 register. +// +//***************************************************************************** +#define AES_KEY1_0_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY1_0_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_KEY1_1 register. +// +//***************************************************************************** +#define AES_KEY1_1_KEY_M 0xFFFFFFFF // Key Data +#define AES_KEY1_1_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_IV_IN_0 register. +// +//***************************************************************************** +#define AES_IV_IN_0_DATA_M 0xFFFFFFFF // Initialization Vector Input +#define AES_IV_IN_0_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_IV_IN_1 register. +// +//***************************************************************************** +#define AES_IV_IN_1_DATA_M 0xFFFFFFFF // Initialization Vector Input +#define AES_IV_IN_1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_IV_IN_2 register. +// +//***************************************************************************** +#define AES_IV_IN_2_DATA_M 0xFFFFFFFF // Initialization Vector Input +#define AES_IV_IN_2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_IV_IN_3 register. +// +//***************************************************************************** +#define AES_IV_IN_3_DATA_M 0xFFFFFFFF // Initialization Vector Input +#define AES_IV_IN_3_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_CTRL register. +// +//***************************************************************************** +#define AES_CTRL_CTXTRDY 0x80000000 // Context Data Registers Ready +#define AES_CTRL_SVCTXTRDY 0x40000000 // AES TAG/IV Block(s) Ready +#define AES_CTRL_SAVE_CONTEXT 0x20000000 // TAG or Result IV Save +#define AES_CTRL_CCM_M_M 0x01C00000 // Counter with CBC-MAC (CCM) +#define AES_CTRL_CCM_L_M 0x00380000 // L Value +#define AES_CTRL_CCM_L_2 0x00080000 // width = 2 +#define AES_CTRL_CCM_L_4 0x00180000 // width = 4 +#define AES_CTRL_CCM_L_8 0x00380000 // width = 8 +#define AES_CTRL_CCM 0x00040000 // AES-CCM Mode Enable +#define AES_CTRL_GCM_M 0x00030000 // AES-GCM Mode Enable +#define AES_CTRL_GCM_NOP 0x00000000 // No operation +#define AES_CTRL_GCM_HLY0ZERO 0x00010000 // GHASH with H loaded and + // Y0-encrypted forced to zero +#define AES_CTRL_GCM_HLY0CALC 0x00020000 // GHASH with H loaded and + // Y0-encrypted calculated + // internally +#define AES_CTRL_GCM_HY0CALC 0x00030000 // Autonomous GHASH (both H and + // Y0-encrypted calculated + // internally) +#define AES_CTRL_CBCMAC 0x00008000 // AES-CBC MAC Enable +#define AES_CTRL_F9 0x00004000 // AES f9 Mode Enable +#define AES_CTRL_F8 0x00002000 // AES f8 Mode Enable +#define AES_CTRL_XTS_M 0x00001800 // AES-XTS Operation Enabled +#define AES_CTRL_XTS_NOP 0x00000000 // No operation +#define AES_CTRL_XTS_TWEAKJL 0x00000800 // Previous/intermediate tweak + // value and j loaded (value is + // loaded via IV, j is loaded via + // the AAD length register) +#define AES_CTRL_XTS_K2IJL 0x00001000 // Key2, n and j are loaded (n is + // loaded via IV, j is loaded via + // the AAD length register) +#define AES_CTRL_XTS_K2ILJ0 0x00001800 // Key2 and n are loaded; j=0 (n is + // loaded via IV) +#define AES_CTRL_CFB 0x00000400 // Full block AES cipher feedback + // mode (CFB128) Enable +#define AES_CTRL_ICM 0x00000200 // AES Integer Counter Mode (ICM) + // Enable +#define AES_CTRL_CTR_WIDTH_M 0x00000180 // AES-CTR Mode Counter Width +#define AES_CTRL_CTR_WIDTH_32 0x00000000 // Counter is 32 bits +#define AES_CTRL_CTR_WIDTH_64 0x00000080 // Counter is 64 bits +#define AES_CTRL_CTR_WIDTH_96 0x00000100 // Counter is 96 bits +#define AES_CTRL_CTR_WIDTH_128 0x00000180 // Counter is 128 bits +#define AES_CTRL_CTR 0x00000040 // Counter Mode +#define AES_CTRL_MODE 0x00000020 // ECB/CBC Mode +#define AES_CTRL_KEY_SIZE_M 0x00000018 // Key Size +#define AES_CTRL_KEY_SIZE_128 0x00000008 // Key is 128 bits +#define AES_CTRL_KEY_SIZE_192 0x00000010 // Key is 192 bits +#define AES_CTRL_KEY_SIZE_256 0x00000018 // Key is 256 bits +#define AES_CTRL_DIRECTION 0x00000004 // Encryption/Decryption Selection +#define AES_CTRL_INPUT_READY 0x00000002 // Input Ready Status +#define AES_CTRL_OUTPUT_READY 0x00000001 // Output Ready Status +#define AES_CTRL_CCM_M_S 22 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_C_LENGTH_0 +// register. +// +//***************************************************************************** +#define AES_C_LENGTH_0_LENGTH_M 0xFFFFFFFF // Data Length +#define AES_C_LENGTH_0_LENGTH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_C_LENGTH_1 +// register. +// +//***************************************************************************** +#define AES_C_LENGTH_1_LENGTH_M 0xFFFFFFFF // Data Length +#define AES_C_LENGTH_1_LENGTH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_AUTH_LENGTH +// register. +// +//***************************************************************************** +#define AES_AUTH_LENGTH_AUTH_M 0xFFFFFFFF // Authentication Data Length +#define AES_AUTH_LENGTH_AUTH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_DATA_IN_0 +// register. +// +//***************************************************************************** +#define AES_DATA_IN_0_DATA_M 0xFFFFFFFF // Secure Data RW + // Plaintext/Ciphertext +#define AES_DATA_IN_0_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_DATA_IN_1 +// register. +// +//***************************************************************************** +#define AES_DATA_IN_1_DATA_M 0xFFFFFFFF // Secure Data RW + // Plaintext/Ciphertext +#define AES_DATA_IN_1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_DATA_IN_2 +// register. +// +//***************************************************************************** +#define AES_DATA_IN_2_DATA_M 0xFFFFFFFF // Secure Data RW + // Plaintext/Ciphertext +#define AES_DATA_IN_2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_DATA_IN_3 +// register. +// +//***************************************************************************** +#define AES_DATA_IN_3_DATA_M 0xFFFFFFFF // Secure Data RW + // Plaintext/Ciphertext +#define AES_DATA_IN_3_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_TAG_OUT_0 +// register. +// +//***************************************************************************** +#define AES_TAG_OUT_0_HASH_M 0xFFFFFFFF // Hash Result +#define AES_TAG_OUT_0_HASH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_TAG_OUT_1 +// register. +// +//***************************************************************************** +#define AES_TAG_OUT_1_HASH_M 0xFFFFFFFF // Hash Result +#define AES_TAG_OUT_1_HASH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_TAG_OUT_2 +// register. +// +//***************************************************************************** +#define AES_TAG_OUT_2_HASH_M 0xFFFFFFFF // Hash Result +#define AES_TAG_OUT_2_HASH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_TAG_OUT_3 +// register. +// +//***************************************************************************** +#define AES_TAG_OUT_3_HASH_M 0xFFFFFFFF // Hash Result +#define AES_TAG_OUT_3_HASH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_REVISION register. +// +//***************************************************************************** +#define AES_REVISION_M 0xFFFFFFFF // Revision number +#define AES_REVISION_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_SYSCONFIG +// register. +// +//***************************************************************************** +#define AES_SYSCONFIG_K3 0x00001000 // K3 Select +#define AES_SYSCONFIG_KEYENC 0x00000800 // Key Encoding +#define AES_SYSCONFIG_MAP_CONTEXT_OUT_ON_DATA_OUT \ + 0x00000200 // Map Context Out on Data Out + // Enable +#define AES_SYSCONFIG_DMA_REQ_CONTEXT_OUT_EN \ + 0x00000100 // DMA Request Context Out Enable +#define AES_SYSCONFIG_DMA_REQ_CONTEXT_IN_EN \ + 0x00000080 // DMA Request Context In Enable +#define AES_SYSCONFIG_DMA_REQ_DATA_OUT_EN \ + 0x00000040 // DMA Request Data Out Enable +#define AES_SYSCONFIG_DMA_REQ_DATA_IN_EN \ + 0x00000020 // DMA Request Data In Enable +#define AES_SYSCONFIG_SOFTRESET 0x00000002 // Soft reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_SYSSTATUS +// register. +// +//***************************************************************************** +#define AES_SYSSTATUS_RESETDONE 0x00000001 // Reset Done + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_IRQSTATUS +// register. +// +//***************************************************************************** +#define AES_IRQSTATUS_CONTEXT_OUT \ + 0x00000008 // Context Output Interrupt Status +#define AES_IRQSTATUS_DATA_OUT 0x00000004 // Data Out Interrupt Status +#define AES_IRQSTATUS_DATA_IN 0x00000002 // Data In Interrupt Status +#define AES_IRQSTATUS_CONTEXT_IN \ + 0x00000001 // Context In Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_IRQENABLE +// register. +// +//***************************************************************************** +#define AES_IRQENABLE_CONTEXT_OUT \ + 0x00000008 // Context Out Interrupt Enable +#define AES_IRQENABLE_DATA_OUT 0x00000004 // Data Out Interrupt Enable +#define AES_IRQENABLE_DATA_IN 0x00000002 // Data In Interrupt Enable +#define AES_IRQENABLE_CONTEXT_IN \ + 0x00000001 // Context In Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_DIRTYBITS +// register. +// +//***************************************************************************** +#define AES_DIRTYBITS_S_DIRTY 0x00000002 // AES Dirty Bit +#define AES_DIRTYBITS_S_ACCESS 0x00000001 // AES Access Bit + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_DMAIM register. +// +//***************************************************************************** +#define AES_DMAIM_DOUT 0x00000008 // Data Out DMA Done Interrupt Mask +#define AES_DMAIM_DIN 0x00000004 // Data In DMA Done Interrupt Mask +#define AES_DMAIM_COUT 0x00000002 // Context Out DMA Done Interrupt + // Mask +#define AES_DMAIM_CIN 0x00000001 // Context In DMA Done Interrupt + // Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_DMARIS register. +// +//***************************************************************************** +#define AES_DMARIS_DOUT 0x00000008 // Data Out DMA Done Raw Interrupt + // Status +#define AES_DMARIS_DIN 0x00000004 // Data In DMA Done Raw Interrupt + // Status +#define AES_DMARIS_COUT 0x00000002 // Context Out DMA Done Raw + // Interrupt Status +#define AES_DMARIS_CIN 0x00000001 // Context In DMA Done Raw + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_DMAMIS register. +// +//***************************************************************************** +#define AES_DMAMIS_DOUT 0x00000008 // Data Out DMA Done Masked + // Interrupt Status +#define AES_DMAMIS_DIN 0x00000004 // Data In DMA Done Masked + // Interrupt Status +#define AES_DMAMIS_COUT 0x00000002 // Context Out DMA Done Masked + // Interrupt Status +#define AES_DMAMIS_CIN 0x00000001 // Context In DMA Done Raw + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the AES_O_DMAIC register. +// +//***************************************************************************** +#define AES_DMAIC_DOUT 0x00000008 // Data Out DMA Done Interrupt + // Clear +#define AES_DMAIC_DIN 0x00000004 // Data In DMA Done Interrupt Clear +#define AES_DMAIC_COUT 0x00000002 // Context Out DMA Done Masked + // Interrupt Status +#define AES_DMAIC_CIN 0x00000001 // Context In DMA Done Raw + // Interrupt Status + +#endif // __HW_AES_H__ diff --git a/os/common/ext/TivaWare/inc/hw_can.h b/os/common/ext/TivaWare/inc/hw_can.h new file mode 100644 index 0000000..a683e67 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_can.h @@ -0,0 +1,462 @@ +//***************************************************************************** +// +// hw_can.h - Defines and macros used when accessing the CAN controllers. +// +// Copyright (c) 2006-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_CAN_H__ +#define __HW_CAN_H__ + +//***************************************************************************** +// +// The following are defines for the CAN register offsets. +// +//***************************************************************************** +#define CAN_O_CTL 0x00000000 // CAN Control +#define CAN_O_STS 0x00000004 // CAN Status +#define CAN_O_ERR 0x00000008 // CAN Error Counter +#define CAN_O_BIT 0x0000000C // CAN Bit Timing +#define CAN_O_INT 0x00000010 // CAN Interrupt +#define CAN_O_TST 0x00000014 // CAN Test +#define CAN_O_BRPE 0x00000018 // CAN Baud Rate Prescaler + // Extension +#define CAN_O_IF1CRQ 0x00000020 // CAN IF1 Command Request +#define CAN_O_IF1CMSK 0x00000024 // CAN IF1 Command Mask +#define CAN_O_IF1MSK1 0x00000028 // CAN IF1 Mask 1 +#define CAN_O_IF1MSK2 0x0000002C // CAN IF1 Mask 2 +#define CAN_O_IF1ARB1 0x00000030 // CAN IF1 Arbitration 1 +#define CAN_O_IF1ARB2 0x00000034 // CAN IF1 Arbitration 2 +#define CAN_O_IF1MCTL 0x00000038 // CAN IF1 Message Control +#define CAN_O_IF1DA1 0x0000003C // CAN IF1 Data A1 +#define CAN_O_IF1DA2 0x00000040 // CAN IF1 Data A2 +#define CAN_O_IF1DB1 0x00000044 // CAN IF1 Data B1 +#define CAN_O_IF1DB2 0x00000048 // CAN IF1 Data B2 +#define CAN_O_IF2CRQ 0x00000080 // CAN IF2 Command Request +#define CAN_O_IF2CMSK 0x00000084 // CAN IF2 Command Mask +#define CAN_O_IF2MSK1 0x00000088 // CAN IF2 Mask 1 +#define CAN_O_IF2MSK2 0x0000008C // CAN IF2 Mask 2 +#define CAN_O_IF2ARB1 0x00000090 // CAN IF2 Arbitration 1 +#define CAN_O_IF2ARB2 0x00000094 // CAN IF2 Arbitration 2 +#define CAN_O_IF2MCTL 0x00000098 // CAN IF2 Message Control +#define CAN_O_IF2DA1 0x0000009C // CAN IF2 Data A1 +#define CAN_O_IF2DA2 0x000000A0 // CAN IF2 Data A2 +#define CAN_O_IF2DB1 0x000000A4 // CAN IF2 Data B1 +#define CAN_O_IF2DB2 0x000000A8 // CAN IF2 Data B2 +#define CAN_O_TXRQ1 0x00000100 // CAN Transmission Request 1 +#define CAN_O_TXRQ2 0x00000104 // CAN Transmission Request 2 +#define CAN_O_NWDA1 0x00000120 // CAN New Data 1 +#define CAN_O_NWDA2 0x00000124 // CAN New Data 2 +#define CAN_O_MSG1INT 0x00000140 // CAN Message 1 Interrupt Pending +#define CAN_O_MSG2INT 0x00000144 // CAN Message 2 Interrupt Pending +#define CAN_O_MSG1VAL 0x00000160 // CAN Message 1 Valid +#define CAN_O_MSG2VAL 0x00000164 // CAN Message 2 Valid + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_CTL register. +// +//***************************************************************************** +#define CAN_CTL_TEST 0x00000080 // Test Mode Enable +#define CAN_CTL_CCE 0x00000040 // Configuration Change Enable +#define CAN_CTL_DAR 0x00000020 // Disable Automatic-Retransmission +#define CAN_CTL_EIE 0x00000008 // Error Interrupt Enable +#define CAN_CTL_SIE 0x00000004 // Status Interrupt Enable +#define CAN_CTL_IE 0x00000002 // CAN Interrupt Enable +#define CAN_CTL_INIT 0x00000001 // Initialization + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_STS register. +// +//***************************************************************************** +#define CAN_STS_BOFF 0x00000080 // Bus-Off Status +#define CAN_STS_EWARN 0x00000040 // Warning Status +#define CAN_STS_EPASS 0x00000020 // Error Passive +#define CAN_STS_RXOK 0x00000010 // Received a Message Successfully +#define CAN_STS_TXOK 0x00000008 // Transmitted a Message + // Successfully +#define CAN_STS_LEC_M 0x00000007 // Last Error Code +#define CAN_STS_LEC_NONE 0x00000000 // No Error +#define CAN_STS_LEC_STUFF 0x00000001 // Stuff Error +#define CAN_STS_LEC_FORM 0x00000002 // Format Error +#define CAN_STS_LEC_ACK 0x00000003 // ACK Error +#define CAN_STS_LEC_BIT1 0x00000004 // Bit 1 Error +#define CAN_STS_LEC_BIT0 0x00000005 // Bit 0 Error +#define CAN_STS_LEC_CRC 0x00000006 // CRC Error +#define CAN_STS_LEC_NOEVENT 0x00000007 // No Event + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_ERR register. +// +//***************************************************************************** +#define CAN_ERR_RP 0x00008000 // Received Error Passive +#define CAN_ERR_REC_M 0x00007F00 // Receive Error Counter +#define CAN_ERR_TEC_M 0x000000FF // Transmit Error Counter +#define CAN_ERR_REC_S 8 +#define CAN_ERR_TEC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_BIT register. +// +//***************************************************************************** +#define CAN_BIT_TSEG2_M 0x00007000 // Time Segment after Sample Point +#define CAN_BIT_TSEG1_M 0x00000F00 // Time Segment Before Sample Point +#define CAN_BIT_SJW_M 0x000000C0 // (Re)Synchronization Jump Width +#define CAN_BIT_BRP_M 0x0000003F // Baud Rate Prescaler +#define CAN_BIT_TSEG2_S 12 +#define CAN_BIT_TSEG1_S 8 +#define CAN_BIT_SJW_S 6 +#define CAN_BIT_BRP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_INT register. +// +//***************************************************************************** +#define CAN_INT_INTID_M 0x0000FFFF // Interrupt Identifier +#define CAN_INT_INTID_NONE 0x00000000 // No interrupt pending +#define CAN_INT_INTID_STATUS 0x00008000 // Status Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_TST register. +// +//***************************************************************************** +#define CAN_TST_RX 0x00000080 // Receive Observation +#define CAN_TST_TX_M 0x00000060 // Transmit Control +#define CAN_TST_TX_CANCTL 0x00000000 // CAN Module Control +#define CAN_TST_TX_SAMPLE 0x00000020 // Sample Point +#define CAN_TST_TX_DOMINANT 0x00000040 // Driven Low +#define CAN_TST_TX_RECESSIVE 0x00000060 // Driven High +#define CAN_TST_LBACK 0x00000010 // Loopback Mode +#define CAN_TST_SILENT 0x00000008 // Silent Mode +#define CAN_TST_BASIC 0x00000004 // Basic Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_BRPE register. +// +//***************************************************************************** +#define CAN_BRPE_BRPE_M 0x0000000F // Baud Rate Prescaler Extension +#define CAN_BRPE_BRPE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1CRQ register. +// +//***************************************************************************** +#define CAN_IF1CRQ_BUSY 0x00008000 // Busy Flag +#define CAN_IF1CRQ_MNUM_M 0x0000003F // Message Number +#define CAN_IF1CRQ_MNUM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1CMSK register. +// +//***************************************************************************** +#define CAN_IF1CMSK_WRNRD 0x00000080 // Write, Not Read +#define CAN_IF1CMSK_MASK 0x00000040 // Access Mask Bits +#define CAN_IF1CMSK_ARB 0x00000020 // Access Arbitration Bits +#define CAN_IF1CMSK_CONTROL 0x00000010 // Access Control Bits +#define CAN_IF1CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit +#define CAN_IF1CMSK_NEWDAT 0x00000004 // Access New Data +#define CAN_IF1CMSK_TXRQST 0x00000004 // Access Transmission Request +#define CAN_IF1CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3 +#define CAN_IF1CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1MSK1 register. +// +//***************************************************************************** +#define CAN_IF1MSK1_IDMSK_M 0x0000FFFF // Identifier Mask +#define CAN_IF1MSK1_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1MSK2 register. +// +//***************************************************************************** +#define CAN_IF1MSK2_MXTD 0x00008000 // Mask Extended Identifier +#define CAN_IF1MSK2_MDIR 0x00004000 // Mask Message Direction +#define CAN_IF1MSK2_IDMSK_M 0x00001FFF // Identifier Mask +#define CAN_IF1MSK2_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1ARB1 register. +// +//***************************************************************************** +#define CAN_IF1ARB1_ID_M 0x0000FFFF // Message Identifier +#define CAN_IF1ARB1_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1ARB2 register. +// +//***************************************************************************** +#define CAN_IF1ARB2_MSGVAL 0x00008000 // Message Valid +#define CAN_IF1ARB2_XTD 0x00004000 // Extended Identifier +#define CAN_IF1ARB2_DIR 0x00002000 // Message Direction +#define CAN_IF1ARB2_ID_M 0x00001FFF // Message Identifier +#define CAN_IF1ARB2_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1MCTL register. +// +//***************************************************************************** +#define CAN_IF1MCTL_NEWDAT 0x00008000 // New Data +#define CAN_IF1MCTL_MSGLST 0x00004000 // Message Lost +#define CAN_IF1MCTL_INTPND 0x00002000 // Interrupt Pending +#define CAN_IF1MCTL_UMASK 0x00001000 // Use Acceptance Mask +#define CAN_IF1MCTL_TXIE 0x00000800 // Transmit Interrupt Enable +#define CAN_IF1MCTL_RXIE 0x00000400 // Receive Interrupt Enable +#define CAN_IF1MCTL_RMTEN 0x00000200 // Remote Enable +#define CAN_IF1MCTL_TXRQST 0x00000100 // Transmit Request +#define CAN_IF1MCTL_EOB 0x00000080 // End of Buffer +#define CAN_IF1MCTL_DLC_M 0x0000000F // Data Length Code +#define CAN_IF1MCTL_DLC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DA1 register. +// +//***************************************************************************** +#define CAN_IF1DA1_DATA_M 0x0000FFFF // Data +#define CAN_IF1DA1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DA2 register. +// +//***************************************************************************** +#define CAN_IF1DA2_DATA_M 0x0000FFFF // Data +#define CAN_IF1DA2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DB1 register. +// +//***************************************************************************** +#define CAN_IF1DB1_DATA_M 0x0000FFFF // Data +#define CAN_IF1DB1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF1DB2 register. +// +//***************************************************************************** +#define CAN_IF1DB2_DATA_M 0x0000FFFF // Data +#define CAN_IF1DB2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2CRQ register. +// +//***************************************************************************** +#define CAN_IF2CRQ_BUSY 0x00008000 // Busy Flag +#define CAN_IF2CRQ_MNUM_M 0x0000003F // Message Number +#define CAN_IF2CRQ_MNUM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2CMSK register. +// +//***************************************************************************** +#define CAN_IF2CMSK_WRNRD 0x00000080 // Write, Not Read +#define CAN_IF2CMSK_MASK 0x00000040 // Access Mask Bits +#define CAN_IF2CMSK_ARB 0x00000020 // Access Arbitration Bits +#define CAN_IF2CMSK_CONTROL 0x00000010 // Access Control Bits +#define CAN_IF2CMSK_CLRINTPND 0x00000008 // Clear Interrupt Pending Bit +#define CAN_IF2CMSK_NEWDAT 0x00000004 // Access New Data +#define CAN_IF2CMSK_TXRQST 0x00000004 // Access Transmission Request +#define CAN_IF2CMSK_DATAA 0x00000002 // Access Data Byte 0 to 3 +#define CAN_IF2CMSK_DATAB 0x00000001 // Access Data Byte 4 to 7 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2MSK1 register. +// +//***************************************************************************** +#define CAN_IF2MSK1_IDMSK_M 0x0000FFFF // Identifier Mask +#define CAN_IF2MSK1_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2MSK2 register. +// +//***************************************************************************** +#define CAN_IF2MSK2_MXTD 0x00008000 // Mask Extended Identifier +#define CAN_IF2MSK2_MDIR 0x00004000 // Mask Message Direction +#define CAN_IF2MSK2_IDMSK_M 0x00001FFF // Identifier Mask +#define CAN_IF2MSK2_IDMSK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2ARB1 register. +// +//***************************************************************************** +#define CAN_IF2ARB1_ID_M 0x0000FFFF // Message Identifier +#define CAN_IF2ARB1_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2ARB2 register. +// +//***************************************************************************** +#define CAN_IF2ARB2_MSGVAL 0x00008000 // Message Valid +#define CAN_IF2ARB2_XTD 0x00004000 // Extended Identifier +#define CAN_IF2ARB2_DIR 0x00002000 // Message Direction +#define CAN_IF2ARB2_ID_M 0x00001FFF // Message Identifier +#define CAN_IF2ARB2_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2MCTL register. +// +//***************************************************************************** +#define CAN_IF2MCTL_NEWDAT 0x00008000 // New Data +#define CAN_IF2MCTL_MSGLST 0x00004000 // Message Lost +#define CAN_IF2MCTL_INTPND 0x00002000 // Interrupt Pending +#define CAN_IF2MCTL_UMASK 0x00001000 // Use Acceptance Mask +#define CAN_IF2MCTL_TXIE 0x00000800 // Transmit Interrupt Enable +#define CAN_IF2MCTL_RXIE 0x00000400 // Receive Interrupt Enable +#define CAN_IF2MCTL_RMTEN 0x00000200 // Remote Enable +#define CAN_IF2MCTL_TXRQST 0x00000100 // Transmit Request +#define CAN_IF2MCTL_EOB 0x00000080 // End of Buffer +#define CAN_IF2MCTL_DLC_M 0x0000000F // Data Length Code +#define CAN_IF2MCTL_DLC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DA1 register. +// +//***************************************************************************** +#define CAN_IF2DA1_DATA_M 0x0000FFFF // Data +#define CAN_IF2DA1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DA2 register. +// +//***************************************************************************** +#define CAN_IF2DA2_DATA_M 0x0000FFFF // Data +#define CAN_IF2DA2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DB1 register. +// +//***************************************************************************** +#define CAN_IF2DB1_DATA_M 0x0000FFFF // Data +#define CAN_IF2DB1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_IF2DB2 register. +// +//***************************************************************************** +#define CAN_IF2DB2_DATA_M 0x0000FFFF // Data +#define CAN_IF2DB2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_TXRQ1 register. +// +//***************************************************************************** +#define CAN_TXRQ1_TXRQST_M 0x0000FFFF // Transmission Request Bits +#define CAN_TXRQ1_TXRQST_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_TXRQ2 register. +// +//***************************************************************************** +#define CAN_TXRQ2_TXRQST_M 0x0000FFFF // Transmission Request Bits +#define CAN_TXRQ2_TXRQST_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_NWDA1 register. +// +//***************************************************************************** +#define CAN_NWDA1_NEWDAT_M 0x0000FFFF // New Data Bits +#define CAN_NWDA1_NEWDAT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_NWDA2 register. +// +//***************************************************************************** +#define CAN_NWDA2_NEWDAT_M 0x0000FFFF // New Data Bits +#define CAN_NWDA2_NEWDAT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG1INT register. +// +//***************************************************************************** +#define CAN_MSG1INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits +#define CAN_MSG1INT_INTPND_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG2INT register. +// +//***************************************************************************** +#define CAN_MSG2INT_INTPND_M 0x0000FFFF // Interrupt Pending Bits +#define CAN_MSG2INT_INTPND_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG1VAL register. +// +//***************************************************************************** +#define CAN_MSG1VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits +#define CAN_MSG1VAL_MSGVAL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CAN_O_MSG2VAL register. +// +//***************************************************************************** +#define CAN_MSG2VAL_MSGVAL_M 0x0000FFFF // Message Valid Bits +#define CAN_MSG2VAL_MSGVAL_S 0 + +#endif // __HW_CAN_H__ diff --git a/os/common/ext/TivaWare/inc/hw_ccm.h b/os/common/ext/TivaWare/inc/hw_ccm.h new file mode 100644 index 0000000..19041b6 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_ccm.h @@ -0,0 +1,115 @@ +//***************************************************************************** +// +// hw_ccm.h - Macros used when accessing the CCM hardware. +// +// Copyright (c) 2012-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_CCM_H__ +#define __HW_CCM_H__ + +//***************************************************************************** +// +// The following are defines for the EC register offsets. +// +//***************************************************************************** +#define CCM_O_CRCCTRL 0x00000400 // CRC Control +#define CCM_O_CRCSEED 0x00000410 // CRC SEED/Context +#define CCM_O_CRCDIN 0x00000414 // CRC Data Input +#define CCM_O_CRCRSLTPP 0x00000418 // CRC Post Processing Result + +//***************************************************************************** +// +// The following are defines for the bit fields in the CCM_O_CRCCTRL register. +// +//***************************************************************************** +#define CCM_CRCCTRL_INIT_M 0x00006000 // CRC Initialization +#define CCM_CRCCTRL_INIT_SEED 0x00000000 // Use the CRCSEED register context + // as the starting value +#define CCM_CRCCTRL_INIT_0 0x00004000 // Initialize to all '0s' +#define CCM_CRCCTRL_INIT_1 0x00006000 // Initialize to all '1s' +#define CCM_CRCCTRL_SIZE 0x00001000 // Input Data Size +#define CCM_CRCCTRL_RESINV 0x00000200 // Result Inverse Enable +#define CCM_CRCCTRL_OBR 0x00000100 // Output Reverse Enable +#define CCM_CRCCTRL_BR 0x00000080 // Bit reverse enable +#define CCM_CRCCTRL_ENDIAN_M 0x00000030 // Endian Control +#define CCM_CRCCTRL_ENDIAN_SBHW 0x00000000 // Configuration unchanged. (B3, + // B2, B1, B0) +#define CCM_CRCCTRL_ENDIAN_SHW 0x00000010 // Bytes are swapped in half-words + // but half-words are not swapped + // (B2, B3, B0, B1) +#define CCM_CRCCTRL_ENDIAN_SHWNB \ + 0x00000020 // Half-words are swapped but bytes + // are not swapped in half-word. + // (B1, B0, B3, B2) +#define CCM_CRCCTRL_ENDIAN_SBSW 0x00000030 // Bytes are swapped in half-words + // and half-words are swapped. (B0, + // B1, B2, B3) +#define CCM_CRCCTRL_TYPE_M 0x0000000F // Operation Type +#define CCM_CRCCTRL_TYPE_P8055 0x00000000 // Polynomial 0x8005 +#define CCM_CRCCTRL_TYPE_P1021 0x00000001 // Polynomial 0x1021 +#define CCM_CRCCTRL_TYPE_P4C11DB7 \ + 0x00000002 // Polynomial 0x4C11DB7 +#define CCM_CRCCTRL_TYPE_P1EDC6F41 \ + 0x00000003 // Polynomial 0x1EDC6F41 +#define CCM_CRCCTRL_TYPE_TCPCHKSUM \ + 0x00000008 // TCP checksum + +//***************************************************************************** +// +// The following are defines for the bit fields in the CCM_O_CRCSEED register. +// +//***************************************************************************** +#define CCM_CRCSEED_SEED_M 0xFFFFFFFF // SEED/Context Value +#define CCM_CRCSEED_SEED_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CCM_O_CRCDIN register. +// +//***************************************************************************** +#define CCM_CRCDIN_DATAIN_M 0xFFFFFFFF // Data Input +#define CCM_CRCDIN_DATAIN_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the CCM_O_CRCRSLTPP +// register. +// +//***************************************************************************** +#define CCM_CRCRSLTPP_RSLTPP_M 0xFFFFFFFF // Post Processing Result +#define CCM_CRCRSLTPP_RSLTPP_S 0 + +#endif // __HW_CCM_H__ diff --git a/os/common/ext/TivaWare/inc/hw_comp.h b/os/common/ext/TivaWare/inc/hw_comp.h new file mode 100644 index 0000000..aea2f84 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_comp.h @@ -0,0 +1,211 @@ +//***************************************************************************** +// +// hw_comp.h - Macros used when accessing the comparator hardware. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_COMP_H__ +#define __HW_COMP_H__ + +//***************************************************************************** +// +// The following are defines for the Comparator register offsets. +// +//***************************************************************************** +#define COMP_O_ACMIS 0x00000000 // Analog Comparator Masked + // Interrupt Status +#define COMP_O_ACRIS 0x00000004 // Analog Comparator Raw Interrupt + // Status +#define COMP_O_ACINTEN 0x00000008 // Analog Comparator Interrupt + // Enable +#define COMP_O_ACREFCTL 0x00000010 // Analog Comparator Reference + // Voltage Control +#define COMP_O_ACSTAT0 0x00000020 // Analog Comparator Status 0 +#define COMP_O_ACCTL0 0x00000024 // Analog Comparator Control 0 +#define COMP_O_ACSTAT1 0x00000040 // Analog Comparator Status 1 +#define COMP_O_ACCTL1 0x00000044 // Analog Comparator Control 1 +#define COMP_O_ACSTAT2 0x00000060 // Analog Comparator Status 2 +#define COMP_O_ACCTL2 0x00000064 // Analog Comparator Control 2 +#define COMP_O_PP 0x00000FC0 // Analog Comparator Peripheral + // Properties + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACMIS register. +// +//***************************************************************************** +#define COMP_ACMIS_IN2 0x00000004 // Comparator 2 Masked Interrupt + // Status +#define COMP_ACMIS_IN1 0x00000002 // Comparator 1 Masked Interrupt + // Status +#define COMP_ACMIS_IN0 0x00000001 // Comparator 0 Masked Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACRIS register. +// +//***************************************************************************** +#define COMP_ACRIS_IN2 0x00000004 // Comparator 2 Interrupt Status +#define COMP_ACRIS_IN1 0x00000002 // Comparator 1 Interrupt Status +#define COMP_ACRIS_IN0 0x00000001 // Comparator 0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACINTEN register. +// +//***************************************************************************** +#define COMP_ACINTEN_IN2 0x00000004 // Comparator 2 Interrupt Enable +#define COMP_ACINTEN_IN1 0x00000002 // Comparator 1 Interrupt Enable +#define COMP_ACINTEN_IN0 0x00000001 // Comparator 0 Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACREFCTL +// register. +// +//***************************************************************************** +#define COMP_ACREFCTL_EN 0x00000200 // Resistor Ladder Enable +#define COMP_ACREFCTL_RNG 0x00000100 // Resistor Ladder Range +#define COMP_ACREFCTL_VREF_M 0x0000000F // Resistor Ladder Voltage Ref +#define COMP_ACREFCTL_VREF_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACSTAT0 register. +// +//***************************************************************************** +#define COMP_ACSTAT0_OVAL 0x00000002 // Comparator Output Value + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACCTL0 register. +// +//***************************************************************************** +#define COMP_ACCTL0_TOEN 0x00000800 // Trigger Output Enable +#define COMP_ACCTL0_ASRCP_M 0x00000600 // Analog Source Positive +#define COMP_ACCTL0_ASRCP_PIN 0x00000000 // Pin value of Cn+ +#define COMP_ACCTL0_ASRCP_PIN0 0x00000200 // Pin value of C0+ +#define COMP_ACCTL0_ASRCP_REF 0x00000400 // Internal voltage reference +#define COMP_ACCTL0_TSLVAL 0x00000080 // Trigger Sense Level Value +#define COMP_ACCTL0_TSEN_M 0x00000060 // Trigger Sense +#define COMP_ACCTL0_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL +#define COMP_ACCTL0_TSEN_FALL 0x00000020 // Falling edge +#define COMP_ACCTL0_TSEN_RISE 0x00000040 // Rising edge +#define COMP_ACCTL0_TSEN_BOTH 0x00000060 // Either edge +#define COMP_ACCTL0_ISLVAL 0x00000010 // Interrupt Sense Level Value +#define COMP_ACCTL0_ISEN_M 0x0000000C // Interrupt Sense +#define COMP_ACCTL0_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL +#define COMP_ACCTL0_ISEN_FALL 0x00000004 // Falling edge +#define COMP_ACCTL0_ISEN_RISE 0x00000008 // Rising edge +#define COMP_ACCTL0_ISEN_BOTH 0x0000000C // Either edge +#define COMP_ACCTL0_CINV 0x00000002 // Comparator Output Invert + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACSTAT1 register. +// +//***************************************************************************** +#define COMP_ACSTAT1_OVAL 0x00000002 // Comparator Output Value + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACCTL1 register. +// +//***************************************************************************** +#define COMP_ACCTL1_TOEN 0x00000800 // Trigger Output Enable +#define COMP_ACCTL1_ASRCP_M 0x00000600 // Analog Source Positive +#define COMP_ACCTL1_ASRCP_PIN 0x00000000 // Pin value of Cn+ +#define COMP_ACCTL1_ASRCP_PIN0 0x00000200 // Pin value of C0+ +#define COMP_ACCTL1_ASRCP_REF 0x00000400 // Internal voltage reference +#define COMP_ACCTL1_TSLVAL 0x00000080 // Trigger Sense Level Value +#define COMP_ACCTL1_TSEN_M 0x00000060 // Trigger Sense +#define COMP_ACCTL1_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL +#define COMP_ACCTL1_TSEN_FALL 0x00000020 // Falling edge +#define COMP_ACCTL1_TSEN_RISE 0x00000040 // Rising edge +#define COMP_ACCTL1_TSEN_BOTH 0x00000060 // Either edge +#define COMP_ACCTL1_ISLVAL 0x00000010 // Interrupt Sense Level Value +#define COMP_ACCTL1_ISEN_M 0x0000000C // Interrupt Sense +#define COMP_ACCTL1_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL +#define COMP_ACCTL1_ISEN_FALL 0x00000004 // Falling edge +#define COMP_ACCTL1_ISEN_RISE 0x00000008 // Rising edge +#define COMP_ACCTL1_ISEN_BOTH 0x0000000C // Either edge +#define COMP_ACCTL1_CINV 0x00000002 // Comparator Output Invert + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACSTAT2 register. +// +//***************************************************************************** +#define COMP_ACSTAT2_OVAL 0x00000002 // Comparator Output Value + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_ACCTL2 register. +// +//***************************************************************************** +#define COMP_ACCTL2_TOEN 0x00000800 // Trigger Output Enable +#define COMP_ACCTL2_ASRCP_M 0x00000600 // Analog Source Positive +#define COMP_ACCTL2_ASRCP_PIN 0x00000000 // Pin value of Cn+ +#define COMP_ACCTL2_ASRCP_PIN0 0x00000200 // Pin value of C0+ +#define COMP_ACCTL2_ASRCP_REF 0x00000400 // Internal voltage reference +#define COMP_ACCTL2_TSLVAL 0x00000080 // Trigger Sense Level Value +#define COMP_ACCTL2_TSEN_M 0x00000060 // Trigger Sense +#define COMP_ACCTL2_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL +#define COMP_ACCTL2_TSEN_FALL 0x00000020 // Falling edge +#define COMP_ACCTL2_TSEN_RISE 0x00000040 // Rising edge +#define COMP_ACCTL2_TSEN_BOTH 0x00000060 // Either edge +#define COMP_ACCTL2_ISLVAL 0x00000010 // Interrupt Sense Level Value +#define COMP_ACCTL2_ISEN_M 0x0000000C // Interrupt Sense +#define COMP_ACCTL2_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL +#define COMP_ACCTL2_ISEN_FALL 0x00000004 // Falling edge +#define COMP_ACCTL2_ISEN_RISE 0x00000008 // Rising edge +#define COMP_ACCTL2_ISEN_BOTH 0x0000000C // Either edge +#define COMP_ACCTL2_CINV 0x00000002 // Comparator Output Invert + +//***************************************************************************** +// +// The following are defines for the bit fields in the COMP_O_PP register. +// +//***************************************************************************** +#define COMP_PP_C2O 0x00040000 // Comparator Output 2 Present +#define COMP_PP_C1O 0x00020000 // Comparator Output 1 Present +#define COMP_PP_C0O 0x00010000 // Comparator Output 0 Present +#define COMP_PP_CMP2 0x00000004 // Comparator 2 Present +#define COMP_PP_CMP1 0x00000002 // Comparator 1 Present +#define COMP_PP_CMP0 0x00000001 // Comparator 0 Present + +#endif // __HW_COMP_H__ diff --git a/os/common/ext/TivaWare/inc/hw_des.h b/os/common/ext/TivaWare/inc/hw_des.h new file mode 100644 index 0000000..da46c52 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_des.h @@ -0,0 +1,310 @@ +//***************************************************************************** +// +// hw_des.h - Macros used when accessing the DES hardware. +// +// Copyright (c) 2012-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_DES_H__ +#define __HW_DES_H__ + +//***************************************************************************** +// +// The following are defines for the DES register offsets. +// +//***************************************************************************** +#define DES_O_KEY3_L 0x00000000 // DES Key 3 LSW for 192-Bit Key +#define DES_O_KEY3_H 0x00000004 // DES Key 3 MSW for 192-Bit Key +#define DES_O_KEY2_L 0x00000008 // DES Key 2 LSW for 128-Bit Key +#define DES_O_KEY2_H 0x0000000C // DES Key 2 MSW for 128-Bit Key +#define DES_O_KEY1_L 0x00000010 // DES Key 1 LSW for 64-Bit Key +#define DES_O_KEY1_H 0x00000014 // DES Key 1 MSW for 64-Bit Key +#define DES_O_IV_L 0x00000018 // DES Initialization Vector +#define DES_O_IV_H 0x0000001C // DES Initialization Vector +#define DES_O_CTRL 0x00000020 // DES Control +#define DES_O_LENGTH 0x00000024 // DES Cryptographic Data Length +#define DES_O_DATA_L 0x00000028 // DES LSW Data RW +#define DES_O_DATA_H 0x0000002C // DES MSW Data RW +#define DES_O_REVISION 0x00000030 // DES Revision Number +#define DES_O_SYSCONFIG 0x00000034 // DES System Configuration +#define DES_O_SYSSTATUS 0x00000038 // DES System Status +#define DES_O_IRQSTATUS 0x0000003C // DES Interrupt Status +#define DES_O_IRQENABLE 0x00000040 // DES Interrupt Enable +#define DES_O_DIRTYBITS 0x00000044 // DES Dirty Bits +#define DES_O_DMAIM 0xFFFF8030 // DES DMA Interrupt Mask +#define DES_O_DMARIS 0xFFFF8034 // DES DMA Raw Interrupt Status +#define DES_O_DMAMIS 0xFFFF8038 // DES DMA Masked Interrupt Status +#define DES_O_DMAIC 0xFFFF803C // DES DMA Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_KEY3_L register. +// +//***************************************************************************** +#define DES_KEY3_L_KEY_M 0xFFFFFFFF // Key Data +#define DES_KEY3_L_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_KEY3_H register. +// +//***************************************************************************** +#define DES_KEY3_H_KEY_M 0xFFFFFFFF // Key Data +#define DES_KEY3_H_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_KEY2_L register. +// +//***************************************************************************** +#define DES_KEY2_L_KEY_M 0xFFFFFFFF // Key Data +#define DES_KEY2_L_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_KEY2_H register. +// +//***************************************************************************** +#define DES_KEY2_H_KEY_M 0xFFFFFFFF // Key Data +#define DES_KEY2_H_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_KEY1_L register. +// +//***************************************************************************** +#define DES_KEY1_L_KEY_M 0xFFFFFFFF // Key Data +#define DES_KEY1_L_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_KEY1_H register. +// +//***************************************************************************** +#define DES_KEY1_H_KEY_M 0xFFFFFFFF // Key Data +#define DES_KEY1_H_KEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_IV_L register. +// +//***************************************************************************** +#define DES_IV_L_M 0xFFFFFFFF // Initialization vector for CBC, + // CFB modes (LSW) +#define DES_IV_L_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_IV_H register. +// +//***************************************************************************** +#define DES_IV_H_M 0xFFFFFFFF // Initialization vector for CBC, + // CFB modes (MSW) +#define DES_IV_H_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_CTRL register. +// +//***************************************************************************** +#define DES_CTRL_CONTEXT 0x80000000 // If 1, this read-only status bit + // indicates that the context data + // registers can be overwritten and + // the host is permitted to write + // the next context +#define DES_CTRL_MODE_M 0x00000030 // Select CBC, ECB or CFB mode0x0: + // ECB mode0x1: CBC mode0x2: CFB + // mode0x3: reserved +#define DES_CTRL_TDES 0x00000008 // Select DES or triple DES + // encryption/decryption +#define DES_CTRL_DIRECTION 0x00000004 // Select encryption/decryption + // 0x0: decryption is selected0x1: + // Encryption is selected +#define DES_CTRL_INPUT_READY 0x00000002 // When 1, ready to encrypt/decrypt + // data +#define DES_CTRL_OUTPUT_READY 0x00000001 // When 1, Data decrypted/encrypted + // ready +#define DES_CTRL_MODE_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_LENGTH register. +// +//***************************************************************************** +#define DES_LENGTH_M 0xFFFFFFFF // Cryptographic data length in + // bytes for all modes +#define DES_LENGTH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_DATA_L register. +// +//***************************************************************************** +#define DES_DATA_L_M 0xFFFFFFFF // Data for encryption/decryption, + // LSW +#define DES_DATA_L_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_DATA_H register. +// +//***************************************************************************** +#define DES_DATA_H_M 0xFFFFFFFF // Data for encryption/decryption, + // MSW +#define DES_DATA_H_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_REVISION register. +// +//***************************************************************************** +#define DES_REVISION_M 0xFFFFFFFF // Revision number +#define DES_REVISION_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_SYSCONFIG +// register. +// +//***************************************************************************** +#define DES_SYSCONFIG_DMA_REQ_CONTEXT_IN_EN \ + 0x00000080 // DMA Request Context In Enable +#define DES_SYSCONFIG_DMA_REQ_DATA_OUT_EN \ + 0x00000040 // DMA Request Data Out Enable +#define DES_SYSCONFIG_DMA_REQ_DATA_IN_EN \ + 0x00000020 // DMA Request Data In Enable +#define DES_SYSCONFIG_SIDLE_M 0x0000000C // Sidle mode +#define DES_SYSCONFIG_SIDLE_FORCE \ + 0x00000000 // Force-idle mode +#define DES_SYSCONFIG_SOFTRESET 0x00000002 // Soft reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_SYSSTATUS +// register. +// +//***************************************************************************** +#define DES_SYSSTATUS_RESETDONE 0x00000001 // Reset Done + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_IRQSTATUS +// register. +// +//***************************************************************************** +#define DES_IRQSTATUS_DATA_OUT 0x00000004 // This bit indicates data output + // interrupt is active and triggers + // the interrupt output +#define DES_IRQSTATUS_DATA_IN 0x00000002 // This bit indicates data input + // interrupt is active and triggers + // the interrupt output +#define DES_IRQSTATUS_CONTEX_IN 0x00000001 // This bit indicates context + // interrupt is active and triggers + // the interrupt output + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_IRQENABLE +// register. +// +//***************************************************************************** +#define DES_IRQENABLE_M_DATA_OUT \ + 0x00000004 // If this bit is set to 1 the data + // output interrupt is enabled +#define DES_IRQENABLE_M_DATA_IN 0x00000002 // If this bit is set to 1 the data + // input interrupt is enabled +#define DES_IRQENABLE_M_CONTEX_IN \ + 0x00000001 // If this bit is set to 1 the + // context interrupt is enabled + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_DIRTYBITS +// register. +// +//***************************************************************************** +#define DES_DIRTYBITS_S_DIRTY 0x00000002 // This bit is set to 1 by the + // module if any of the DES_* + // registers is written +#define DES_DIRTYBITS_S_ACCESS 0x00000001 // This bit is set to 1 by the + // module if any of the DES_* + // registers is read + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_DMAIM register. +// +//***************************************************************************** +#define DES_DMAIM_DOUT 0x00000004 // Data Out DMA Done Interrupt Mask +#define DES_DMAIM_DIN 0x00000002 // Data In DMA Done Interrupt Mask +#define DES_DMAIM_CIN 0x00000001 // Context In DMA Done Interrupt + // Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_DMARIS register. +// +//***************************************************************************** +#define DES_DMARIS_DOUT 0x00000004 // Data Out DMA Done Raw Interrupt + // Status +#define DES_DMARIS_DIN 0x00000002 // Data In DMA Done Raw Interrupt + // Status +#define DES_DMARIS_CIN 0x00000001 // Context In DMA Done Raw + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_DMAMIS register. +// +//***************************************************************************** +#define DES_DMAMIS_DOUT 0x00000004 // Data Out DMA Done Masked + // Interrupt Status +#define DES_DMAMIS_DIN 0x00000002 // Data In DMA Done Masked + // Interrupt Status +#define DES_DMAMIS_CIN 0x00000001 // Context In DMA Done Raw + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the DES_O_DMAIC register. +// +//***************************************************************************** +#define DES_DMAIC_DOUT 0x00000004 // Data Out DMA Done Interrupt + // Clear +#define DES_DMAIC_DIN 0x00000002 // Data In DMA Done Interrupt Clear +#define DES_DMAIC_CIN 0x00000001 // Context In DMA Done Raw + // Interrupt Status + +#endif // __HW_DES_H__ diff --git a/os/common/ext/TivaWare/inc/hw_eeprom.h b/os/common/ext/TivaWare/inc/hw_eeprom.h new file mode 100644 index 0000000..7ba282d --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_eeprom.h @@ -0,0 +1,251 @@ +//***************************************************************************** +// +// hw_eeprom.h - Macros used when accessing the EEPROM controller. +// +// Copyright (c) 2011-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_EEPROM_H__ +#define __HW_EEPROM_H__ + +//***************************************************************************** +// +// The following are defines for the EEPROM register offsets. +// +//***************************************************************************** +#define EEPROM_EESIZE 0x400AF000 // EEPROM Size Information +#define EEPROM_EEBLOCK 0x400AF004 // EEPROM Current Block +#define EEPROM_EEOFFSET 0x400AF008 // EEPROM Current Offset +#define EEPROM_EERDWR 0x400AF010 // EEPROM Read-Write +#define EEPROM_EERDWRINC 0x400AF014 // EEPROM Read-Write with Increment +#define EEPROM_EEDONE 0x400AF018 // EEPROM Done Status +#define EEPROM_EESUPP 0x400AF01C // EEPROM Support Control and + // Status +#define EEPROM_EEUNLOCK 0x400AF020 // EEPROM Unlock +#define EEPROM_EEPROT 0x400AF030 // EEPROM Protection +#define EEPROM_EEPASS0 0x400AF034 // EEPROM Password +#define EEPROM_EEPASS1 0x400AF038 // EEPROM Password +#define EEPROM_EEPASS2 0x400AF03C // EEPROM Password +#define EEPROM_EEINT 0x400AF040 // EEPROM Interrupt +#define EEPROM_EEHIDE0 0x400AF050 // EEPROM Block Hide 0 +#define EEPROM_EEHIDE 0x400AF050 // EEPROM Block Hide +#define EEPROM_EEHIDE1 0x400AF054 // EEPROM Block Hide 1 +#define EEPROM_EEHIDE2 0x400AF058 // EEPROM Block Hide 2 +#define EEPROM_EEDBGME 0x400AF080 // EEPROM Debug Mass Erase +#define EEPROM_PP 0x400AFFC0 // EEPROM Peripheral Properties + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EESIZE register. +// +//***************************************************************************** +#define EEPROM_EESIZE_WORDCNT_M 0x0000FFFF // Number of 32-Bit Words +#define EEPROM_EESIZE_BLKCNT_M 0x07FF0000 // Number of 16-Word Blocks +#define EEPROM_EESIZE_WORDCNT_S 0 +#define EEPROM_EESIZE_BLKCNT_S 16 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEBLOCK register. +// +//***************************************************************************** +#define EEPROM_EEBLOCK_BLOCK_M 0x0000FFFF // Current Block +#define EEPROM_EEBLOCK_BLOCK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEOFFSET +// register. +// +//***************************************************************************** +#define EEPROM_EEOFFSET_OFFSET_M \ + 0x0000000F // Current Address Offset +#define EEPROM_EEOFFSET_OFFSET_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EERDWR register. +// +//***************************************************************************** +#define EEPROM_EERDWR_VALUE_M 0xFFFFFFFF // EEPROM Read or Write Data +#define EEPROM_EERDWR_VALUE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EERDWRINC +// register. +// +//***************************************************************************** +#define EEPROM_EERDWRINC_VALUE_M \ + 0xFFFFFFFF // EEPROM Read or Write Data with + // Increment +#define EEPROM_EERDWRINC_VALUE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEDONE register. +// +//***************************************************************************** +#define EEPROM_EEDONE_WORKING 0x00000001 // EEPROM Working +#define EEPROM_EEDONE_WKERASE 0x00000004 // Working on an Erase +#define EEPROM_EEDONE_WKCOPY 0x00000008 // Working on a Copy +#define EEPROM_EEDONE_NOPERM 0x00000010 // Write Without Permission +#define EEPROM_EEDONE_WRBUSY 0x00000020 // Write Busy + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EESUPP register. +// +//***************************************************************************** +#define EEPROM_EESUPP_ERETRY 0x00000004 // Erase Must Be Retried +#define EEPROM_EESUPP_PRETRY 0x00000008 // Programming Must Be Retried + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEUNLOCK +// register. +// +//***************************************************************************** +#define EEPROM_EEUNLOCK_UNLOCK_M \ + 0xFFFFFFFF // EEPROM Unlock + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEPROT register. +// +//***************************************************************************** +#define EEPROM_EEPROT_PROT_M 0x00000007 // Protection Control +#define EEPROM_EEPROT_PROT_RWNPW \ + 0x00000000 // This setting is the default. If + // there is no password, the block + // is not protected and is readable + // and writable +#define EEPROM_EEPROT_PROT_RWPW 0x00000001 // If there is a password, the + // block is readable or writable + // only when unlocked +#define EEPROM_EEPROT_PROT_RONPW \ + 0x00000002 // If there is no password, the + // block is readable, not writable +#define EEPROM_EEPROT_ACC 0x00000008 // Access Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEPASS0 register. +// +//***************************************************************************** +#define EEPROM_EEPASS0_PASS_M 0xFFFFFFFF // Password +#define EEPROM_EEPASS0_PASS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEPASS1 register. +// +//***************************************************************************** +#define EEPROM_EEPASS1_PASS_M 0xFFFFFFFF // Password +#define EEPROM_EEPASS1_PASS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEPASS2 register. +// +//***************************************************************************** +#define EEPROM_EEPASS2_PASS_M 0xFFFFFFFF // Password +#define EEPROM_EEPASS2_PASS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEINT register. +// +//***************************************************************************** +#define EEPROM_EEINT_INT 0x00000001 // Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEHIDE0 register. +// +//***************************************************************************** +#define EEPROM_EEHIDE0_HN_M 0xFFFFFFFE // Hide Block + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEHIDE register. +// +//***************************************************************************** +#define EEPROM_EEHIDE_HN_M 0xFFFFFFFE // Hide Block + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEHIDE1 register. +// +//***************************************************************************** +#define EEPROM_EEHIDE1_HN_M 0xFFFFFFFF // Hide Block + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEHIDE2 register. +// +//***************************************************************************** +#define EEPROM_EEHIDE2_HN_M 0xFFFFFFFF // Hide Block + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_EEDBGME register. +// +//***************************************************************************** +#define EEPROM_EEDBGME_ME 0x00000001 // Mass Erase +#define EEPROM_EEDBGME_KEY_M 0xFFFF0000 // Erase Key +#define EEPROM_EEDBGME_KEY_S 16 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EEPROM_PP register. +// +//***************************************************************************** +#define EEPROM_PP_SIZE_M 0x0000FFFF // EEPROM Size +#define EEPROM_PP_SIZE_64 0x00000000 // 64 bytes of EEPROM +#define EEPROM_PP_SIZE_128 0x00000001 // 128 bytes of EEPROM +#define EEPROM_PP_SIZE_256 0x00000003 // 256 bytes of EEPROM +#define EEPROM_PP_SIZE_512 0x00000007 // 512 bytes of EEPROM +#define EEPROM_PP_SIZE_1K 0x0000000F // 1 KB of EEPROM +#define EEPROM_PP_SIZE_2K 0x0000001F // 2 KB of EEPROM +#define EEPROM_PP_SIZE_3K 0x0000003F // 3 KB of EEPROM +#define EEPROM_PP_SIZE_4K 0x0000007F // 4 KB of EEPROM +#define EEPROM_PP_SIZE_5K 0x000000FF // 5 KB of EEPROM +#define EEPROM_PP_SIZE_6K 0x000001FF // 6 KB of EEPROM +#define EEPROM_PP_SIZE_S 0 + +#endif // __HW_EEPROM_H__ diff --git a/os/common/ext/TivaWare/inc/hw_emac.h b/os/common/ext/TivaWare/inc/hw_emac.h new file mode 100644 index 0000000..67cb03e --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_emac.h @@ -0,0 +1,1839 @@ +//***************************************************************************** +// +// hw_emac.h - Macros used when accessing the EMAC hardware. +// +// Copyright (c) 2012-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_EMAC_H__ +#define __HW_EMAC_H__ + +//***************************************************************************** +// +// The following are defines for the EMAC register offsets. +// +//***************************************************************************** +#define EMAC_O_CFG 0x00000000 // Ethernet MAC Configuration +#define EMAC_O_FRAMEFLTR 0x00000004 // Ethernet MAC Frame Filter +#define EMAC_O_HASHTBLH 0x00000008 // Ethernet MAC Hash Table High +#define EMAC_O_HASHTBLL 0x0000000C // Ethernet MAC Hash Table Low +#define EMAC_O_MIIADDR 0x00000010 // Ethernet MAC MII Address +#define EMAC_O_MIIDATA 0x00000014 // Ethernet MAC MII Data Register +#define EMAC_O_FLOWCTL 0x00000018 // Ethernet MAC Flow Control +#define EMAC_O_VLANTG 0x0000001C // Ethernet MAC VLAN Tag +#define EMAC_O_STATUS 0x00000024 // Ethernet MAC Status +#define EMAC_O_RWUFF 0x00000028 // Ethernet MAC Remote Wake-Up + // Frame Filter +#define EMAC_O_PMTCTLSTAT 0x0000002C // Ethernet MAC PMT Control and + // Status Register +#define EMAC_O_RIS 0x00000038 // Ethernet MAC Raw Interrupt + // Status +#define EMAC_O_IM 0x0000003C // Ethernet MAC Interrupt Mask +#define EMAC_O_ADDR0H 0x00000040 // Ethernet MAC Address 0 High +#define EMAC_O_ADDR0L 0x00000044 // Ethernet MAC Address 0 Low + // Register +#define EMAC_O_ADDR1H 0x00000048 // Ethernet MAC Address 1 High +#define EMAC_O_ADDR1L 0x0000004C // Ethernet MAC Address 1 Low +#define EMAC_O_ADDR2H 0x00000050 // Ethernet MAC Address 2 High +#define EMAC_O_ADDR2L 0x00000054 // Ethernet MAC Address 2 Low +#define EMAC_O_ADDR3H 0x00000058 // Ethernet MAC Address 3 High +#define EMAC_O_ADDR3L 0x0000005C // Ethernet MAC Address 3 Low +#define EMAC_O_WDOGTO 0x000000DC // Ethernet MAC Watchdog Timeout +#define EMAC_O_MMCCTRL 0x00000100 // Ethernet MAC MMC Control +#define EMAC_O_MMCRXRIS 0x00000104 // Ethernet MAC MMC Receive Raw + // Interrupt Status +#define EMAC_O_MMCTXRIS 0x00000108 // Ethernet MAC MMC Transmit Raw + // Interrupt Status +#define EMAC_O_MMCRXIM 0x0000010C // Ethernet MAC MMC Receive + // Interrupt Mask +#define EMAC_O_MMCTXIM 0x00000110 // Ethernet MAC MMC Transmit + // Interrupt Mask +#define EMAC_O_TXCNTGB 0x00000118 // Ethernet MAC Transmit Frame + // Count for Good and Bad Frames +#define EMAC_O_TXCNTSCOL 0x0000014C // Ethernet MAC Transmit Frame + // Count for Frames Transmitted + // after Single Collision +#define EMAC_O_TXCNTMCOL 0x00000150 // Ethernet MAC Transmit Frame + // Count for Frames Transmitted + // after Multiple Collisions +#define EMAC_O_TXOCTCNTG 0x00000164 // Ethernet MAC Transmit Octet + // Count Good +#define EMAC_O_RXCNTGB 0x00000180 // Ethernet MAC Receive Frame Count + // for Good and Bad Frames +#define EMAC_O_RXCNTCRCERR 0x00000194 // Ethernet MAC Receive Frame Count + // for CRC Error Frames +#define EMAC_O_RXCNTALGNERR 0x00000198 // Ethernet MAC Receive Frame Count + // for Alignment Error Frames +#define EMAC_O_RXCNTGUNI 0x000001C4 // Ethernet MAC Receive Frame Count + // for Good Unicast Frames +#define EMAC_O_VLNINCREP 0x00000584 // Ethernet MAC VLAN Tag Inclusion + // or Replacement +#define EMAC_O_VLANHASH 0x00000588 // Ethernet MAC VLAN Hash Table +#define EMAC_O_TIMSTCTRL 0x00000700 // Ethernet MAC Timestamp Control +#define EMAC_O_SUBSECINC 0x00000704 // Ethernet MAC Sub-Second + // Increment +#define EMAC_O_TIMSEC 0x00000708 // Ethernet MAC System Time - + // Seconds +#define EMAC_O_TIMNANO 0x0000070C // Ethernet MAC System Time - + // Nanoseconds +#define EMAC_O_TIMSECU 0x00000710 // Ethernet MAC System Time - + // Seconds Update +#define EMAC_O_TIMNANOU 0x00000714 // Ethernet MAC System Time - + // Nanoseconds Update +#define EMAC_O_TIMADD 0x00000718 // Ethernet MAC Timestamp Addend +#define EMAC_O_TARGSEC 0x0000071C // Ethernet MAC Target Time Seconds +#define EMAC_O_TARGNANO 0x00000720 // Ethernet MAC Target Time + // Nanoseconds +#define EMAC_O_HWORDSEC 0x00000724 // Ethernet MAC System Time-Higher + // Word Seconds +#define EMAC_O_TIMSTAT 0x00000728 // Ethernet MAC Timestamp Status +#define EMAC_O_PPSCTRL 0x0000072C // Ethernet MAC PPS Control +#define EMAC_O_PPS0INTVL 0x00000760 // Ethernet MAC PPS0 Interval +#define EMAC_O_PPS0WIDTH 0x00000764 // Ethernet MAC PPS0 Width +#define EMAC_O_DMABUSMOD 0x00000C00 // Ethernet MAC DMA Bus Mode +#define EMAC_O_TXPOLLD 0x00000C04 // Ethernet MAC Transmit Poll + // Demand +#define EMAC_O_RXPOLLD 0x00000C08 // Ethernet MAC Receive Poll Demand +#define EMAC_O_RXDLADDR 0x00000C0C // Ethernet MAC Receive Descriptor + // List Address +#define EMAC_O_TXDLADDR 0x00000C10 // Ethernet MAC Transmit Descriptor + // List Address +#define EMAC_O_DMARIS 0x00000C14 // Ethernet MAC DMA Interrupt + // Status +#define EMAC_O_DMAOPMODE 0x00000C18 // Ethernet MAC DMA Operation Mode +#define EMAC_O_DMAIM 0x00000C1C // Ethernet MAC DMA Interrupt Mask + // Register +#define EMAC_O_MFBOC 0x00000C20 // Ethernet MAC Missed Frame and + // Buffer Overflow Counter +#define EMAC_O_RXINTWDT 0x00000C24 // Ethernet MAC Receive Interrupt + // Watchdog Timer +#define EMAC_O_HOSTXDESC 0x00000C48 // Ethernet MAC Current Host + // Transmit Descriptor +#define EMAC_O_HOSRXDESC 0x00000C4C // Ethernet MAC Current Host + // Receive Descriptor +#define EMAC_O_HOSTXBA 0x00000C50 // Ethernet MAC Current Host + // Transmit Buffer Address +#define EMAC_O_HOSRXBA 0x00000C54 // Ethernet MAC Current Host + // Receive Buffer Address +#define EMAC_O_PP 0x00000FC0 // Ethernet MAC Peripheral Property + // Register +#define EMAC_O_PC 0x00000FC4 // Ethernet MAC Peripheral + // Configuration Register +#define EMAC_O_CC 0x00000FC8 // Ethernet MAC Clock Configuration + // Register +#define EMAC_O_EPHYRIS 0x00000FD0 // Ethernet PHY Raw Interrupt + // Status +#define EMAC_O_EPHYIM 0x00000FD4 // Ethernet PHY Interrupt Mask +#define EMAC_O_EPHYMISC 0x00000FD8 // Ethernet PHY Masked Interrupt + // Status and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_CFG register. +// +//***************************************************************************** +#define EMAC_CFG_TWOKPEN 0x08000000 // IEEE 802 +#define EMAC_CFG_CST 0x02000000 // CRC Stripping for Type Frames +#define EMAC_CFG_WDDIS 0x00800000 // Watchdog Disable +#define EMAC_CFG_JD 0x00400000 // Jabber Disable +#define EMAC_CFG_JFEN 0x00100000 // Jumbo Frame Enable +#define EMAC_CFG_IFG_M 0x000E0000 // Inter-Frame Gap (IFG) +#define EMAC_CFG_IFG_96 0x00000000 // 96 bit times +#define EMAC_CFG_IFG_88 0x00020000 // 88 bit times +#define EMAC_CFG_IFG_80 0x00040000 // 80 bit times +#define EMAC_CFG_IFG_72 0x00060000 // 72 bit times +#define EMAC_CFG_IFG_64 0x00080000 // 64 bit times +#define EMAC_CFG_IFG_56 0x000A0000 // 56 bit times +#define EMAC_CFG_IFG_48 0x000C0000 // 48 bit times +#define EMAC_CFG_IFG_40 0x000E0000 // 40 bit times +#define EMAC_CFG_DISCRS 0x00010000 // Disable Carrier Sense During + // Transmission +#define EMAC_CFG_PS 0x00008000 // Port Select +#define EMAC_CFG_FES 0x00004000 // Speed +#define EMAC_CFG_DRO 0x00002000 // Disable Receive Own +#define EMAC_CFG_LOOPBM 0x00001000 // Loopback Mode +#define EMAC_CFG_DUPM 0x00000800 // Duplex Mode +#define EMAC_CFG_IPC 0x00000400 // Checksum Offload +#define EMAC_CFG_DR 0x00000200 // Disable Retry +#define EMAC_CFG_ACS 0x00000080 // Automatic Pad or CRC Stripping +#define EMAC_CFG_BL_M 0x00000060 // Back-Off Limit +#define EMAC_CFG_BL_1024 0x00000000 // k = min (n,10) +#define EMAC_CFG_BL_256 0x00000020 // k = min (n,8) +#define EMAC_CFG_BL_8 0x00000040 // k = min (n,4) +#define EMAC_CFG_BL_2 0x00000060 // k = min (n,1) +#define EMAC_CFG_DC 0x00000010 // Deferral Check +#define EMAC_CFG_TE 0x00000008 // Transmitter Enable +#define EMAC_CFG_RE 0x00000004 // Receiver Enable +#define EMAC_CFG_PRELEN_M 0x00000003 // Preamble Length for Transmit + // Frames +#define EMAC_CFG_PRELEN_7 0x00000000 // 7 bytes of preamble +#define EMAC_CFG_PRELEN_5 0x00000001 // 5 bytes of preamble +#define EMAC_CFG_PRELEN_3 0x00000002 // 3 bytes of preamble + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_FRAMEFLTR +// register. +// +//***************************************************************************** +#define EMAC_FRAMEFLTR_RA 0x80000000 // Receive All +#define EMAC_FRAMEFLTR_VTFE 0x00010000 // VLAN Tag Filter Enable +#define EMAC_FRAMEFLTR_HPF 0x00000400 // Hash or Perfect Filter +#define EMAC_FRAMEFLTR_SAF 0x00000200 // Source Address Filter Enable +#define EMAC_FRAMEFLTR_SAIF 0x00000100 // Source Address (SA) Inverse + // Filtering +#define EMAC_FRAMEFLTR_PCF_M 0x000000C0 // Pass Control Frames +#define EMAC_FRAMEFLTR_PCF_ALL 0x00000000 // The MAC filters all control + // frames from reaching application +#define EMAC_FRAMEFLTR_PCF_PAUSE \ + 0x00000040 // MAC forwards all control frames + // except PAUSE control frames to + // application even if they fail + // the address filter +#define EMAC_FRAMEFLTR_PCF_NONE 0x00000080 // MAC forwards all control frames + // to application even if they fail + // the address Filter +#define EMAC_FRAMEFLTR_PCF_ADDR 0x000000C0 // MAC forwards control frames that + // pass the address Filter +#define EMAC_FRAMEFLTR_DBF 0x00000020 // Disable Broadcast Frames +#define EMAC_FRAMEFLTR_PM 0x00000010 // Pass All Multicast +#define EMAC_FRAMEFLTR_DAIF 0x00000008 // Destination Address (DA) Inverse + // Filtering +#define EMAC_FRAMEFLTR_HMC 0x00000004 // Hash Multicast +#define EMAC_FRAMEFLTR_HUC 0x00000002 // Hash Unicast +#define EMAC_FRAMEFLTR_PR 0x00000001 // Promiscuous Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_HASHTBLH +// register. +// +//***************************************************************************** +#define EMAC_HASHTBLH_HTH_M 0xFFFFFFFF // Hash Table High +#define EMAC_HASHTBLH_HTH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_HASHTBLL +// register. +// +//***************************************************************************** +#define EMAC_HASHTBLL_HTL_M 0xFFFFFFFF // Hash Table Low +#define EMAC_HASHTBLL_HTL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_MIIADDR register. +// +//***************************************************************************** +#define EMAC_MIIADDR_PLA_M 0x0000F800 // Physical Layer Address +#define EMAC_MIIADDR_MII_M 0x000007C0 // MII Register +#define EMAC_MIIADDR_CR_M 0x0000003C // Clock Reference Frequency + // Selection +#define EMAC_MIIADDR_CR_60_100 0x00000000 // The frequency of the System + // Clock is 60 to 100 MHz providing + // a MDIO clock of SYSCLK/42 +#define EMAC_MIIADDR_CR_100_150 0x00000004 // The frequency of the System + // Clock is 100 to 150 MHz + // providing a MDIO clock of + // SYSCLK/62 +#define EMAC_MIIADDR_CR_20_35 0x00000008 // The frequency of the System + // Clock is 20-35 MHz providing a + // MDIO clock of System Clock/16 +#define EMAC_MIIADDR_CR_35_60 0x0000000C // The frequency of the System + // Clock is 35 to 60 MHz providing + // a MDIO clock of System Clock/26 +#define EMAC_MIIADDR_MIIW 0x00000002 // MII Write +#define EMAC_MIIADDR_MIIB 0x00000001 // MII Busy +#define EMAC_MIIADDR_PLA_S 11 +#define EMAC_MIIADDR_MII_S 6 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_MIIDATA register. +// +//***************************************************************************** +#define EMAC_MIIDATA_DATA_M 0x0000FFFF // MII Data +#define EMAC_MIIDATA_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_FLOWCTL register. +// +//***************************************************************************** +#define EMAC_FLOWCTL_PT_M 0xFFFF0000 // Pause Time +#define EMAC_FLOWCTL_DZQP 0x00000080 // Disable Zero-Quanta Pause +#define EMAC_FLOWCTL_UP 0x00000008 // Unicast Pause Frame Detect +#define EMAC_FLOWCTL_RFE 0x00000004 // Receive Flow Control Enable +#define EMAC_FLOWCTL_TFE 0x00000002 // Transmit Flow Control Enable +#define EMAC_FLOWCTL_FCBBPA 0x00000001 // Flow Control Busy or + // Back-pressure Activate +#define EMAC_FLOWCTL_PT_S 16 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_VLANTG register. +// +//***************************************************************************** +#define EMAC_VLANTG_VTHM 0x00080000 // VLAN Tag Hash Table Match Enable +#define EMAC_VLANTG_ESVL 0x00040000 // Enable S-VLAN +#define EMAC_VLANTG_VTIM 0x00020000 // VLAN Tag Inverse Match Enable +#define EMAC_VLANTG_ETV 0x00010000 // Enable 12-Bit VLAN Tag + // Comparison +#define EMAC_VLANTG_VL_M 0x0000FFFF // VLAN Tag Identifier for Receive + // Frames +#define EMAC_VLANTG_VL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_STATUS register. +// +//***************************************************************************** +#define EMAC_STATUS_TXFF 0x02000000 // TX/RX Controller TX FIFO Full + // Status +#define EMAC_STATUS_TXFE 0x01000000 // TX/RX Controller TX FIFO Not + // Empty Status +#define EMAC_STATUS_TWC 0x00400000 // TX/RX Controller TX FIFO Write + // Controller Active Status +#define EMAC_STATUS_TRC_M 0x00300000 // TX/RX Controller's TX FIFO Read + // Controller Status +#define EMAC_STATUS_TRC_IDLE 0x00000000 // IDLE state +#define EMAC_STATUS_TRC_READ 0x00100000 // READ state (transferring data to + // MAC transmitter) +#define EMAC_STATUS_TRC_WAIT 0x00200000 // Waiting for TX Status from MAC + // transmitter +#define EMAC_STATUS_TRC_WRFLUSH 0x00300000 // Writing the received TX Status + // or flushing the TX FIFO +#define EMAC_STATUS_TXPAUSED 0x00080000 // MAC Transmitter PAUSE +#define EMAC_STATUS_TFC_M 0x00060000 // MAC Transmit Frame Controller + // Status +#define EMAC_STATUS_TFC_IDLE 0x00000000 // IDLE state +#define EMAC_STATUS_TFC_STATUS 0x00020000 // Waiting for status of previous + // frame or IFG or backoff period + // to be over +#define EMAC_STATUS_TFC_PAUSE 0x00040000 // Generating and transmitting a + // PAUSE control frame (in the + // full-duplex mode) +#define EMAC_STATUS_TFC_INPUT 0x00060000 // Transferring input frame for + // transmission +#define EMAC_STATUS_TPE 0x00010000 // MAC MII Transmit Protocol Engine + // Status +#define EMAC_STATUS_RXF_M 0x00000300 // TX/RX Controller RX FIFO + // Fill-level Status +#define EMAC_STATUS_RXF_EMPTY 0x00000000 // RX FIFO Empty +#define EMAC_STATUS_RXF_BELOW 0x00000100 // RX FIFO fill level is below the + // flow-control deactivate + // threshold +#define EMAC_STATUS_RXF_ABOVE 0x00000200 // RX FIFO fill level is above the + // flow-control activate threshold +#define EMAC_STATUS_RXF_FULL 0x00000300 // RX FIFO Full +#define EMAC_STATUS_RRC_M 0x00000060 // TX/RX Controller Read Controller + // State +#define EMAC_STATUS_RRC_IDLE 0x00000000 // IDLE state +#define EMAC_STATUS_RRC_STATUS 0x00000020 // Reading frame data +#define EMAC_STATUS_RRC_DATA 0x00000040 // Reading frame status (or + // timestamp) +#define EMAC_STATUS_RRC_FLUSH 0x00000060 // Flushing the frame data and + // status +#define EMAC_STATUS_RWC 0x00000010 // TX/RX Controller RX FIFO Write + // Controller Active Status +#define EMAC_STATUS_RFCFC_M 0x00000006 // MAC Receive Frame Controller + // FIFO Status +#define EMAC_STATUS_RPE 0x00000001 // MAC MII Receive Protocol Engine + // Status +#define EMAC_STATUS_RFCFC_S 1 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_RWUFF register. +// +//***************************************************************************** +#define EMAC_RWUFF_WAKEUPFIL_M 0xFFFFFFFF // Remote Wake-Up Frame Filter +#define EMAC_RWUFF_WAKEUPFIL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_PMTCTLSTAT +// register. +// +//***************************************************************************** +#define EMAC_PMTCTLSTAT_WUPFRRST \ + 0x80000000 // Wake-Up Frame Filter Register + // Pointer Reset +#define EMAC_PMTCTLSTAT_RWKPTR_M \ + 0x07000000 // Remote Wake-Up FIFO Pointer +#define EMAC_PMTCTLSTAT_GLBLUCAST \ + 0x00000200 // Global Unicast +#define EMAC_PMTCTLSTAT_WUPRX 0x00000040 // Wake-Up Frame Received +#define EMAC_PMTCTLSTAT_MGKPRX 0x00000020 // Magic Packet Received +#define EMAC_PMTCTLSTAT_WUPFREN 0x00000004 // Wake-Up Frame Enable +#define EMAC_PMTCTLSTAT_MGKPKTEN \ + 0x00000002 // Magic Packet Enable +#define EMAC_PMTCTLSTAT_PWRDWN 0x00000001 // Power Down +#define EMAC_PMTCTLSTAT_RWKPTR_S \ + 24 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_RIS register. +// +//***************************************************************************** +#define EMAC_RIS_TS 0x00000200 // Timestamp Interrupt Status +#define EMAC_RIS_MMCTX 0x00000040 // MMC Transmit Interrupt Status +#define EMAC_RIS_MMCRX 0x00000020 // MMC Receive Interrupt Status +#define EMAC_RIS_MMC 0x00000010 // MMC Interrupt Status +#define EMAC_RIS_PMT 0x00000008 // PMT Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_IM register. +// +//***************************************************************************** +#define EMAC_IM_TSI 0x00000200 // Timestamp Interrupt Mask +#define EMAC_IM_PMT 0x00000008 // PMT Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_ADDR0H register. +// +//***************************************************************************** +#define EMAC_ADDR0H_AE 0x80000000 // Address Enable +#define EMAC_ADDR0H_ADDRHI_M 0x0000FFFF // MAC Address0 [47:32] +#define EMAC_ADDR0H_ADDRHI_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_ADDR0L register. +// +//***************************************************************************** +#define EMAC_ADDR0L_ADDRLO_M 0xFFFFFFFF // MAC Address0 [31:0] +#define EMAC_ADDR0L_ADDRLO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_ADDR1H register. +// +//***************************************************************************** +#define EMAC_ADDR1H_AE 0x80000000 // Address Enable +#define EMAC_ADDR1H_SA 0x40000000 // Source Address +#define EMAC_ADDR1H_MBC_M 0x3F000000 // Mask Byte Control +#define EMAC_ADDR1H_ADDRHI_M 0x0000FFFF // MAC Address1 [47:32] +#define EMAC_ADDR1H_MBC_S 24 +#define EMAC_ADDR1H_ADDRHI_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_ADDR1L register. +// +//***************************************************************************** +#define EMAC_ADDR1L_ADDRLO_M 0xFFFFFFFF // MAC Address1 [31:0] +#define EMAC_ADDR1L_ADDRLO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_ADDR2H register. +// +//***************************************************************************** +#define EMAC_ADDR2H_AE 0x80000000 // Address Enable +#define EMAC_ADDR2H_SA 0x40000000 // Source Address +#define EMAC_ADDR2H_MBC_M 0x3F000000 // Mask Byte Control +#define EMAC_ADDR2H_ADDRHI_M 0x0000FFFF // MAC Address2 [47:32] +#define EMAC_ADDR2H_MBC_S 24 +#define EMAC_ADDR2H_ADDRHI_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_ADDR2L register. +// +//***************************************************************************** +#define EMAC_ADDR2L_ADDRLO_M 0xFFFFFFFF // MAC Address2 [31:0] +#define EMAC_ADDR2L_ADDRLO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_ADDR3H register. +// +//***************************************************************************** +#define EMAC_ADDR3H_AE 0x80000000 // Address Enable +#define EMAC_ADDR3H_SA 0x40000000 // Source Address +#define EMAC_ADDR3H_MBC_M 0x3F000000 // Mask Byte Control +#define EMAC_ADDR3H_ADDRHI_M 0x0000FFFF // MAC Address3 [47:32] +#define EMAC_ADDR3H_MBC_S 24 +#define EMAC_ADDR3H_ADDRHI_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_ADDR3L register. +// +//***************************************************************************** +#define EMAC_ADDR3L_ADDRLO_M 0xFFFFFFFF // MAC Address3 [31:0] +#define EMAC_ADDR3L_ADDRLO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_WDOGTO register. +// +//***************************************************************************** +#define EMAC_WDOGTO_PWE 0x00010000 // Programmable Watchdog Enable +#define EMAC_WDOGTO_WTO_M 0x00003FFF // Watchdog Timeout +#define EMAC_WDOGTO_WTO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_MMCCTRL register. +// +//***************************************************************************** +#define EMAC_MMCCTRL_UCDBC 0x00000100 // Update MMC Counters for Dropped + // Broadcast Frames +#define EMAC_MMCCTRL_CNTPRSTLVL 0x00000020 // Full/Half Preset Level Value +#define EMAC_MMCCTRL_CNTPRST 0x00000010 // Counters Preset +#define EMAC_MMCCTRL_CNTFREEZ 0x00000008 // MMC Counter Freeze +#define EMAC_MMCCTRL_RSTONRD 0x00000004 // Reset on Read +#define EMAC_MMCCTRL_CNTSTPRO 0x00000002 // Counters Stop Rollover +#define EMAC_MMCCTRL_CNTRST 0x00000001 // Counters Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_MMCRXRIS +// register. +// +//***************************************************************************** +#define EMAC_MMCRXRIS_UCGF 0x00020000 // MMC Receive Unicast Good Frame + // Counter Interrupt Status +#define EMAC_MMCRXRIS_ALGNERR 0x00000040 // MMC Receive Alignment Error + // Frame Counter Interrupt Status +#define EMAC_MMCRXRIS_CRCERR 0x00000020 // MMC Receive CRC Error Frame + // Counter Interrupt Status +#define EMAC_MMCRXRIS_GBF 0x00000001 // MMC Receive Good Bad Frame + // Counter Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_MMCTXRIS +// register. +// +//***************************************************************************** +#define EMAC_MMCTXRIS_OCTCNT 0x00100000 // Octet Counter Interrupt Status +#define EMAC_MMCTXRIS_MCOLLGF 0x00008000 // MMC Transmit Multiple Collision + // Good Frame Counter Interrupt + // Status +#define EMAC_MMCTXRIS_SCOLLGF 0x00004000 // MMC Transmit Single Collision + // Good Frame Counter Interrupt + // Status +#define EMAC_MMCTXRIS_GBF 0x00000002 // MMC Transmit Good Bad Frame + // Counter Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_MMCRXIM register. +// +//***************************************************************************** +#define EMAC_MMCRXIM_UCGF 0x00020000 // MMC Receive Unicast Good Frame + // Counter Interrupt Mask +#define EMAC_MMCRXIM_ALGNERR 0x00000040 // MMC Receive Alignment Error + // Frame Counter Interrupt Mask +#define EMAC_MMCRXIM_CRCERR 0x00000020 // MMC Receive CRC Error Frame + // Counter Interrupt Mask +#define EMAC_MMCRXIM_GBF 0x00000001 // MMC Receive Good Bad Frame + // Counter Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_MMCTXIM register. +// +//***************************************************************************** +#define EMAC_MMCTXIM_OCTCNT 0x00100000 // MMC Transmit Good Octet Counter + // Interrupt Mask +#define EMAC_MMCTXIM_MCOLLGF 0x00008000 // MMC Transmit Multiple Collision + // Good Frame Counter Interrupt + // Mask +#define EMAC_MMCTXIM_SCOLLGF 0x00004000 // MMC Transmit Single Collision + // Good Frame Counter Interrupt + // Mask +#define EMAC_MMCTXIM_GBF 0x00000002 // MMC Transmit Good Bad Frame + // Counter Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TXCNTGB register. +// +//***************************************************************************** +#define EMAC_TXCNTGB_TXFRMGB_M 0xFFFFFFFF // This field indicates the number + // of good and bad frames + // transmitted, exclusive of + // retried frames +#define EMAC_TXCNTGB_TXFRMGB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TXCNTSCOL +// register. +// +//***************************************************************************** +#define EMAC_TXCNTSCOL_TXSNGLCOLG_M \ + 0xFFFFFFFF // This field indicates the number + // of successfully transmitted + // frames after a single collision + // in the half-duplex mode +#define EMAC_TXCNTSCOL_TXSNGLCOLG_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TXCNTMCOL +// register. +// +//***************************************************************************** +#define EMAC_TXCNTMCOL_TXMULTCOLG_M \ + 0xFFFFFFFF // This field indicates the number + // of successfully transmitted + // frames after multiple collisions + // in the half-duplex mode +#define EMAC_TXCNTMCOL_TXMULTCOLG_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TXOCTCNTG +// register. +// +//***************************************************************************** +#define EMAC_TXOCTCNTG_TXOCTG_M 0xFFFFFFFF // This field indicates the number + // of bytes transmitted, exclusive + // of preamble, in good frames +#define EMAC_TXOCTCNTG_TXOCTG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_RXCNTGB register. +// +//***************************************************************************** +#define EMAC_RXCNTGB_RXFRMGB_M 0xFFFFFFFF // This field indicates the number + // of received good and bad frames +#define EMAC_RXCNTGB_RXFRMGB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_RXCNTCRCERR +// register. +// +//***************************************************************************** +#define EMAC_RXCNTCRCERR_RXCRCERR_M \ + 0xFFFFFFFF // This field indicates the number + // of frames received with CRC + // error +#define EMAC_RXCNTCRCERR_RXCRCERR_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_RXCNTALGNERR +// register. +// +//***************************************************************************** +#define EMAC_RXCNTALGNERR_RXALGNERR_M \ + 0xFFFFFFFF // This field indicates the number + // of frames received with + // alignment (dribble) error +#define EMAC_RXCNTALGNERR_RXALGNERR_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_RXCNTGUNI +// register. +// +//***************************************************************************** +#define EMAC_RXCNTGUNI_RXUCASTG_M \ + 0xFFFFFFFF // This field indicates the number + // of received good unicast frames +#define EMAC_RXCNTGUNI_RXUCASTG_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_VLNINCREP +// register. +// +//***************************************************************************** +#define EMAC_VLNINCREP_CSVL 0x00080000 // C-VLAN or S-VLAN +#define EMAC_VLNINCREP_VLP 0x00040000 // VLAN Priority Control +#define EMAC_VLNINCREP_VLC_M 0x00030000 // VLAN Tag Control in Transmit + // Frames +#define EMAC_VLNINCREP_VLC_NONE 0x00000000 // No VLAN tag deletion, insertion, + // or replacement +#define EMAC_VLNINCREP_VLC_TAGDEL \ + 0x00010000 // VLAN tag deletion +#define EMAC_VLNINCREP_VLC_TAGINS \ + 0x00020000 // VLAN tag insertion +#define EMAC_VLNINCREP_VLC_TAGREP \ + 0x00030000 // VLAN tag replacement +#define EMAC_VLNINCREP_VLT_M 0x0000FFFF // VLAN Tag for Transmit Frames +#define EMAC_VLNINCREP_VLT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_VLANHASH +// register. +// +//***************************************************************************** +#define EMAC_VLANHASH_VLHT_M 0x0000FFFF // VLAN Hash Table +#define EMAC_VLANHASH_VLHT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TIMSTCTRL +// register. +// +//***************************************************************************** +#define EMAC_TIMSTCTRL_PTPFLTR 0x00040000 // Enable MAC address for PTP Frame + // Filtering +#define EMAC_TIMSTCTRL_SELPTP_M 0x00030000 // Select PTP packets for Taking + // Snapshots +#define EMAC_TIMSTCTRL_TSMAST 0x00008000 // Enable Snapshot for Messages + // Relevant to Master +#define EMAC_TIMSTCTRL_TSEVNT 0x00004000 // Enable Timestamp Snapshot for + // Event Messages +#define EMAC_TIMSTCTRL_PTPIPV4 0x00002000 // Enable Processing of PTP Frames + // Sent over IPv4-UDP +#define EMAC_TIMSTCTRL_PTPIPV6 0x00001000 // Enable Processing of PTP Frames + // Sent Over IPv6-UDP +#define EMAC_TIMSTCTRL_PTPETH 0x00000800 // Enable Processing of PTP Over + // Ethernet Frames +#define EMAC_TIMSTCTRL_PTPVER2 0x00000400 // Enable PTP Packet Processing For + // Version 2 Format +#define EMAC_TIMSTCTRL_DGTLBIN 0x00000200 // Timestamp Digital or Binary + // Rollover Control +#define EMAC_TIMSTCTRL_ALLF 0x00000100 // Enable Timestamp For All Frames +#define EMAC_TIMSTCTRL_ADDREGUP 0x00000020 // Addend Register Update +#define EMAC_TIMSTCTRL_INTTRIG 0x00000010 // Timestamp Interrupt Trigger + // Enable +#define EMAC_TIMSTCTRL_TSUPDT 0x00000008 // Timestamp Update +#define EMAC_TIMSTCTRL_TSINIT 0x00000004 // Timestamp Initialize +#define EMAC_TIMSTCTRL_TSFCUPDT 0x00000002 // Timestamp Fine or Coarse Update +#define EMAC_TIMSTCTRL_TSEN 0x00000001 // Timestamp Enable +#define EMAC_TIMSTCTRL_SELPTP_S 16 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_SUBSECINC +// register. +// +//***************************************************************************** +#define EMAC_SUBSECINC_SSINC_M 0x000000FF // Sub-second Increment Value +#define EMAC_SUBSECINC_SSINC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TIMSEC register. +// +//***************************************************************************** +#define EMAC_TIMSEC_TSS_M 0xFFFFFFFF // Timestamp Second +#define EMAC_TIMSEC_TSS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TIMNANO register. +// +//***************************************************************************** +#define EMAC_TIMNANO_TSSS_M 0x7FFFFFFF // Timestamp Sub-Seconds +#define EMAC_TIMNANO_TSSS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TIMSECU register. +// +//***************************************************************************** +#define EMAC_TIMSECU_TSS_M 0xFFFFFFFF // Timestamp Second +#define EMAC_TIMSECU_TSS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TIMNANOU +// register. +// +//***************************************************************************** +#define EMAC_TIMNANOU_ADDSUB 0x80000000 // Add or subtract time +#define EMAC_TIMNANOU_TSSS_M 0x7FFFFFFF // Timestamp Sub-Second +#define EMAC_TIMNANOU_TSSS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TIMADD register. +// +//***************************************************************************** +#define EMAC_TIMADD_TSAR_M 0xFFFFFFFF // Timestamp Addend Register +#define EMAC_TIMADD_TSAR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TARGSEC register. +// +//***************************************************************************** +#define EMAC_TARGSEC_TSTR_M 0xFFFFFFFF // Target Time Seconds Register +#define EMAC_TARGSEC_TSTR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TARGNANO +// register. +// +//***************************************************************************** +#define EMAC_TARGNANO_TRGTBUSY 0x80000000 // Target Time Register Busy +#define EMAC_TARGNANO_TTSLO_M 0x7FFFFFFF // Target Timestamp Low Register +#define EMAC_TARGNANO_TTSLO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_HWORDSEC +// register. +// +//***************************************************************************** +#define EMAC_HWORDSEC_TSHWR_M 0x0000FFFF // Target Timestamp Higher Word + // Register +#define EMAC_HWORDSEC_TSHWR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TIMSTAT register. +// +//***************************************************************************** +#define EMAC_TIMSTAT_TSTARGT 0x00000002 // Timestamp Target Time Reached +#define EMAC_TIMSTAT_TSSOVF 0x00000001 // Timestamp Seconds Overflow + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_PPSCTRL register. +// +//***************************************************************************** +#define EMAC_PPSCTRL_TRGMODS0_M 0x00000060 // Target Time Register Mode for + // PPS0 Output +#define EMAC_PPSCTRL_TRGMODS0_INTONLY \ + 0x00000000 // Indicates that the Target Time + // registers are programmed only + // for generating the interrupt + // event +#define EMAC_PPSCTRL_TRGMODS0_INTPPS0 \ + 0x00000040 // Indicates that the Target Time + // registers are programmed for + // generating the interrupt event + // and starting or stopping the + // generation of the EN0PPS output + // signal +#define EMAC_PPSCTRL_TRGMODS0_PPS0ONLY \ + 0x00000060 // Indicates that the Target Time + // registers are programmed only + // for starting or stopping the + // generation of the EN0PPS output + // signal. No interrupt is asserted +#define EMAC_PPSCTRL_PPSEN0 0x00000010 // Flexible PPS Output Mode Enable +#define EMAC_PPSCTRL_PPSCTRL_M 0x0000000F // EN0PPS Output Frequency Control + // (PPSCTRL) or Command Control + // (PPSCMD) + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_PPS0INTVL +// register. +// +//***************************************************************************** +#define EMAC_PPS0INTVL_PPS0INT_M \ + 0xFFFFFFFF // PPS0 Output Signal Interval +#define EMAC_PPS0INTVL_PPS0INT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_PPS0WIDTH +// register. +// +//***************************************************************************** +#define EMAC_PPS0WIDTH_M 0xFFFFFFFF // EN0PPS Output Signal Width +#define EMAC_PPS0WIDTH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_DMABUSMOD +// register. +// +//***************************************************************************** +#define EMAC_DMABUSMOD_RIB 0x80000000 // Rebuild Burst +#define EMAC_DMABUSMOD_TXPR 0x08000000 // Transmit Priority +#define EMAC_DMABUSMOD_MB 0x04000000 // Mixed Burst +#define EMAC_DMABUSMOD_AAL 0x02000000 // Address Aligned Beats +#define EMAC_DMABUSMOD_8XPBL 0x01000000 // 8 x Programmable Burst Length + // (PBL) Mode +#define EMAC_DMABUSMOD_USP 0x00800000 // Use Separate Programmable Burst + // Length (PBL) +#define EMAC_DMABUSMOD_RPBL_M 0x007E0000 // RX DMA Programmable Burst Length + // (PBL) +#define EMAC_DMABUSMOD_FB 0x00010000 // Fixed Burst +#define EMAC_DMABUSMOD_PR_M 0x0000C000 // Priority Ratio +#define EMAC_DMABUSMOD_PBL_M 0x00003F00 // Programmable Burst Length +#define EMAC_DMABUSMOD_ATDS 0x00000080 // Alternate Descriptor Size +#define EMAC_DMABUSMOD_DSL_M 0x0000007C // Descriptor Skip Length +#define EMAC_DMABUSMOD_DA 0x00000002 // DMA Arbitration Scheme +#define EMAC_DMABUSMOD_SWR 0x00000001 // DMA Software Reset +#define EMAC_DMABUSMOD_RPBL_S 17 +#define EMAC_DMABUSMOD_PR_S 14 +#define EMAC_DMABUSMOD_PBL_S 8 +#define EMAC_DMABUSMOD_DSL_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TXPOLLD register. +// +//***************************************************************************** +#define EMAC_TXPOLLD_TPD_M 0xFFFFFFFF // Transmit Poll Demand +#define EMAC_TXPOLLD_TPD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_RXPOLLD register. +// +//***************************************************************************** +#define EMAC_RXPOLLD_RPD_M 0xFFFFFFFF // Receive Poll Demand +#define EMAC_RXPOLLD_RPD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_RXDLADDR +// register. +// +//***************************************************************************** +#define EMAC_RXDLADDR_STRXLIST_M \ + 0xFFFFFFFC // Start of Receive List +#define EMAC_RXDLADDR_STRXLIST_S \ + 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_TXDLADDR +// register. +// +//***************************************************************************** +#define EMAC_TXDLADDR_TXDLADDR_M \ + 0xFFFFFFFC // Start of Transmit List Base + // Address +#define EMAC_TXDLADDR_TXDLADDR_S \ + 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_DMARIS register. +// +//***************************************************************************** +#define EMAC_DMARIS_TT 0x20000000 // Timestamp Trigger Interrupt + // Status +#define EMAC_DMARIS_PMT 0x10000000 // MAC PMT Interrupt Status +#define EMAC_DMARIS_MMC 0x08000000 // MAC MMC Interrupt +#define EMAC_DMARIS_AE_M 0x03800000 // Access Error +#define EMAC_DMARIS_AE_RXDMAWD 0x00000000 // Error during RX DMA Write Data + // Transfer +#define EMAC_DMARIS_AE_TXDMARD 0x01800000 // Error during TX DMA Read Data + // Transfer +#define EMAC_DMARIS_AE_RXDMADW 0x02000000 // Error during RX DMA Descriptor + // Write Access +#define EMAC_DMARIS_AE_TXDMADW 0x02800000 // Error during TX DMA Descriptor + // Write Access +#define EMAC_DMARIS_AE_RXDMADR 0x03000000 // Error during RX DMA Descriptor + // Read Access +#define EMAC_DMARIS_AE_TXDMADR 0x03800000 // Error during TX DMA Descriptor + // Read Access +#define EMAC_DMARIS_TS_M 0x00700000 // Transmit Process State +#define EMAC_DMARIS_TS_STOP 0x00000000 // Stopped; Reset or Stop transmit + // command processed +#define EMAC_DMARIS_TS_RUNTXTD 0x00100000 // Running; Fetching transmit + // transfer descriptor +#define EMAC_DMARIS_TS_STATUS 0x00200000 // Running; Waiting for status +#define EMAC_DMARIS_TS_RUNTX 0x00300000 // Running; Reading data from host + // memory buffer and queuing it to + // transmit buffer (TX FIFO) +#define EMAC_DMARIS_TS_TSTAMP 0x00400000 // Writing Timestamp +#define EMAC_DMARIS_TS_SUSPEND 0x00600000 // Suspended; Transmit descriptor + // unavailable or transmit buffer + // underflow +#define EMAC_DMARIS_TS_RUNCTD 0x00700000 // Running; Closing transmit + // descriptor +#define EMAC_DMARIS_RS_M 0x000E0000 // Received Process State +#define EMAC_DMARIS_RS_STOP 0x00000000 // Stopped: Reset or stop receive + // command issued +#define EMAC_DMARIS_RS_RUNRXTD 0x00020000 // Running: Fetching receive + // transfer descriptor +#define EMAC_DMARIS_RS_RUNRXD 0x00060000 // Running: Waiting for receive + // packet +#define EMAC_DMARIS_RS_SUSPEND 0x00080000 // Suspended: Receive descriptor + // unavailable +#define EMAC_DMARIS_RS_RUNCRD 0x000A0000 // Running: Closing receive + // descriptor +#define EMAC_DMARIS_RS_TSWS 0x000C0000 // Writing Timestamp +#define EMAC_DMARIS_RS_RUNTXD 0x000E0000 // Running: Transferring the + // receive packet data from receive + // buffer to host memory +#define EMAC_DMARIS_NIS 0x00010000 // Normal Interrupt Summary +#define EMAC_DMARIS_AIS 0x00008000 // Abnormal Interrupt Summary +#define EMAC_DMARIS_ERI 0x00004000 // Early Receive Interrupt +#define EMAC_DMARIS_FBI 0x00002000 // Fatal Bus Error Interrupt +#define EMAC_DMARIS_ETI 0x00000400 // Early Transmit Interrupt +#define EMAC_DMARIS_RWT 0x00000200 // Receive Watchdog Timeout +#define EMAC_DMARIS_RPS 0x00000100 // Receive Process Stopped +#define EMAC_DMARIS_RU 0x00000080 // Receive Buffer Unavailable +#define EMAC_DMARIS_RI 0x00000040 // Receive Interrupt +#define EMAC_DMARIS_UNF 0x00000020 // Transmit Underflow +#define EMAC_DMARIS_OVF 0x00000010 // Receive Overflow +#define EMAC_DMARIS_TJT 0x00000008 // Transmit Jabber Timeout +#define EMAC_DMARIS_TU 0x00000004 // Transmit Buffer Unavailable +#define EMAC_DMARIS_TPS 0x00000002 // Transmit Process Stopped +#define EMAC_DMARIS_TI 0x00000001 // Transmit Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_DMAOPMODE +// register. +// +//***************************************************************************** +#define EMAC_DMAOPMODE_DT 0x04000000 // Disable Dropping of TCP/IP + // Checksum Error Frames +#define EMAC_DMAOPMODE_RSF 0x02000000 // Receive Store and Forward +#define EMAC_DMAOPMODE_DFF 0x01000000 // Disable Flushing of Received + // Frames +#define EMAC_DMAOPMODE_TSF 0x00200000 // Transmit Store and Forward +#define EMAC_DMAOPMODE_FTF 0x00100000 // Flush Transmit FIFO +#define EMAC_DMAOPMODE_TTC_M 0x0001C000 // Transmit Threshold Control +#define EMAC_DMAOPMODE_TTC_64 0x00000000 // 64 bytes +#define EMAC_DMAOPMODE_TTC_128 0x00004000 // 128 bytes +#define EMAC_DMAOPMODE_TTC_192 0x00008000 // 192 bytes +#define EMAC_DMAOPMODE_TTC_256 0x0000C000 // 256 bytes +#define EMAC_DMAOPMODE_TTC_40 0x00010000 // 40 bytes +#define EMAC_DMAOPMODE_TTC_32 0x00014000 // 32 bytes +#define EMAC_DMAOPMODE_TTC_24 0x00018000 // 24 bytes +#define EMAC_DMAOPMODE_TTC_16 0x0001C000 // 16 bytes +#define EMAC_DMAOPMODE_ST 0x00002000 // Start or Stop Transmission + // Command +#define EMAC_DMAOPMODE_FEF 0x00000080 // Forward Error Frames +#define EMAC_DMAOPMODE_FUF 0x00000040 // Forward Undersized Good Frames +#define EMAC_DMAOPMODE_DGF 0x00000020 // Drop Giant Frame Enable +#define EMAC_DMAOPMODE_RTC_M 0x00000018 // Receive Threshold Control +#define EMAC_DMAOPMODE_RTC_64 0x00000000 // 64 bytes +#define EMAC_DMAOPMODE_RTC_32 0x00000008 // 32 bytes +#define EMAC_DMAOPMODE_RTC_96 0x00000010 // 96 bytes +#define EMAC_DMAOPMODE_RTC_128 0x00000018 // 128 bytes +#define EMAC_DMAOPMODE_OSF 0x00000004 // Operate on Second Frame +#define EMAC_DMAOPMODE_SR 0x00000002 // Start or Stop Receive + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_DMAIM register. +// +//***************************************************************************** +#define EMAC_DMAIM_NIE 0x00010000 // Normal Interrupt Summary Enable +#define EMAC_DMAIM_AIE 0x00008000 // Abnormal Interrupt Summary + // Enable +#define EMAC_DMAIM_ERE 0x00004000 // Early Receive Interrupt Enable +#define EMAC_DMAIM_FBE 0x00002000 // Fatal Bus Error Enable +#define EMAC_DMAIM_ETE 0x00000400 // Early Transmit Interrupt Enable +#define EMAC_DMAIM_RWE 0x00000200 // Receive Watchdog Timeout Enable +#define EMAC_DMAIM_RSE 0x00000100 // Receive Stopped Enable +#define EMAC_DMAIM_RUE 0x00000080 // Receive Buffer Unavailable + // Enable +#define EMAC_DMAIM_RIE 0x00000040 // Receive Interrupt Enable +#define EMAC_DMAIM_UNE 0x00000020 // Underflow Interrupt Enable +#define EMAC_DMAIM_OVE 0x00000010 // Overflow Interrupt Enable +#define EMAC_DMAIM_TJE 0x00000008 // Transmit Jabber Timeout Enable +#define EMAC_DMAIM_TUE 0x00000004 // Transmit Buffer Unvailable + // Enable +#define EMAC_DMAIM_TSE 0x00000002 // Transmit Stopped Enable +#define EMAC_DMAIM_TIE 0x00000001 // Transmit Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_MFBOC register. +// +//***************************************************************************** +#define EMAC_MFBOC_OVFCNTOVF 0x10000000 // Overflow Bit for FIFO Overflow + // Counter +#define EMAC_MFBOC_OVFFRMCNT_M 0x0FFE0000 // Overflow Frame Counter +#define EMAC_MFBOC_MISCNTOVF 0x00010000 // Overflow bit for Missed Frame + // Counter +#define EMAC_MFBOC_MISFRMCNT_M 0x0000FFFF // Missed Frame Counter +#define EMAC_MFBOC_OVFFRMCNT_S 17 +#define EMAC_MFBOC_MISFRMCNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_RXINTWDT +// register. +// +//***************************************************************************** +#define EMAC_RXINTWDT_RIWT_M 0x000000FF // Receive Interrupt Watchdog Timer + // Count +#define EMAC_RXINTWDT_RIWT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_HOSTXDESC +// register. +// +//***************************************************************************** +#define EMAC_HOSTXDESC_CURTXDESC_M \ + 0xFFFFFFFF // Host Transmit Descriptor Address + // Pointer +#define EMAC_HOSTXDESC_CURTXDESC_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_HOSRXDESC +// register. +// +//***************************************************************************** +#define EMAC_HOSRXDESC_CURRXDESC_M \ + 0xFFFFFFFF // Host Receive Descriptor Address + // Pointer +#define EMAC_HOSRXDESC_CURRXDESC_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_HOSTXBA register. +// +//***************************************************************************** +#define EMAC_HOSTXBA_CURTXBUFA_M \ + 0xFFFFFFFF // Host Transmit Buffer Address + // Pointer +#define EMAC_HOSTXBA_CURTXBUFA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_HOSRXBA register. +// +//***************************************************************************** +#define EMAC_HOSRXBA_CURRXBUFA_M \ + 0xFFFFFFFF // Host Receive Buffer Address + // Pointer +#define EMAC_HOSRXBA_CURRXBUFA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_PP register. +// +//***************************************************************************** +#define EMAC_PP_MACTYPE_M 0x00000700 // Ethernet MAC Type +#define EMAC_PP_MACTYPE_1 0x00000100 // Tiva TM4E129x-class MAC +#define EMAC_PP_PHYTYPE_M 0x00000007 // Ethernet PHY Type +#define EMAC_PP_PHYTYPE_NONE 0x00000000 // No PHY +#define EMAC_PP_PHYTYPE_1 0x00000003 // Snowflake class PHY + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_PC register. +// +//***************************************************************************** +#define EMAC_PC_PHYEXT 0x80000000 // PHY Select +#define EMAC_PC_PINTFS_M 0x70000000 // Ethernet Interface Select +#define EMAC_PC_PINTFS_IMII 0x00000000 // MII (default) Used for internal + // PHY or external PHY connected + // via MII +#define EMAC_PC_PINTFS_RMII 0x40000000 // RMII: Used for external PHY + // connected via RMII +#define EMAC_PC_DIGRESTART 0x02000000 // PHY Soft Restart +#define EMAC_PC_NIBDETDIS 0x01000000 // Odd Nibble TXER Detection + // Disable +#define EMAC_PC_RXERIDLE 0x00800000 // RXER Detection During Idle +#define EMAC_PC_ISOMIILL 0x00400000 // Isolate MII in Link Loss +#define EMAC_PC_LRR 0x00200000 // Link Loss Recovery +#define EMAC_PC_TDRRUN 0x00100000 // TDR Auto Run +#define EMAC_PC_FASTLDMODE_M 0x000F8000 // Fast Link Down Mode +#define EMAC_PC_POLSWAP 0x00004000 // Polarity Swap +#define EMAC_PC_MDISWAP 0x00002000 // MDI Swap +#define EMAC_PC_RBSTMDIX 0x00001000 // Robust Auto MDI-X +#define EMAC_PC_FASTMDIX 0x00000800 // Fast Auto MDI-X +#define EMAC_PC_MDIXEN 0x00000400 // MDIX Enable +#define EMAC_PC_FASTRXDV 0x00000200 // Fast RXDV Detection +#define EMAC_PC_FASTLUPD 0x00000100 // FAST Link-Up in Parallel Detect +#define EMAC_PC_EXTFD 0x00000080 // Extended Full Duplex Ability +#define EMAC_PC_FASTANEN 0x00000040 // Fast Auto Negotiation Enable +#define EMAC_PC_FASTANSEL_M 0x00000030 // Fast Auto Negotiation Select +#define EMAC_PC_ANEN 0x00000008 // Auto Negotiation Enable +#define EMAC_PC_ANMODE_M 0x00000006 // Auto Negotiation Mode +#define EMAC_PC_ANMODE_10HD 0x00000000 // When ANEN = 0x0, the mode is + // 10Base-T, Half-Duplex +#define EMAC_PC_ANMODE_10FD 0x00000002 // When ANEN = 0x0, the mode is + // 10Base-T, Full-Duplex +#define EMAC_PC_ANMODE_100HD 0x00000004 // When ANEN = 0x0, the mode is + // 100Base-TX, Half-Duplex +#define EMAC_PC_ANMODE_100FD 0x00000006 // When ANEN = 0x0, the mode is + // 100Base-TX, Full-Duplex +#define EMAC_PC_PHYHOLD 0x00000001 // Ethernet PHY Hold +#define EMAC_PC_FASTLDMODE_S 15 +#define EMAC_PC_FASTANSEL_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_CC register. +// +//***************************************************************************** +#define EMAC_CC_PTPCEN 0x00040000 // PTP Clock Reference Enable +#define EMAC_CC_POL 0x00020000 // LED Polarity Control +#define EMAC_CC_CLKEN 0x00010000 // EN0RREF_CLK Signal Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_EPHYRIS register. +// +//***************************************************************************** +#define EMAC_EPHYRIS_INT 0x00000001 // Ethernet PHY Raw Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_EPHYIM register. +// +//***************************************************************************** +#define EMAC_EPHYIM_INT 0x00000001 // Ethernet PHY Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the EMAC_O_EPHYMISC +// register. +// +//***************************************************************************** +#define EMAC_EPHYMISC_INT 0x00000001 // Ethernet PHY Status and Clear + // register + +//***************************************************************************** +// +// The following are defines for the EPHY register offsets. +// +//***************************************************************************** +#define EPHY_BMCR 0x00000000 // Ethernet PHY Basic Mode Control +#define EPHY_BMSR 0x00000001 // Ethernet PHY Basic Mode Status +#define EPHY_ID1 0x00000002 // Ethernet PHY Identifier Register + // 1 +#define EPHY_ID2 0x00000003 // Ethernet PHY Identifier Register + // 2 +#define EPHY_ANA 0x00000004 // Ethernet PHY Auto-Negotiation + // Advertisement +#define EPHY_ANLPA 0x00000005 // Ethernet PHY Auto-Negotiation + // Link Partner Ability +#define EPHY_ANER 0x00000006 // Ethernet PHY Auto-Negotiation + // Expansion +#define EPHY_ANNPTR 0x00000007 // Ethernet PHY Auto-Negotiation + // Next Page TX +#define EPHY_ANLNPTR 0x00000008 // Ethernet PHY Auto-Negotiation + // Link Partner Ability Next Page +#define EPHY_CFG1 0x00000009 // Ethernet PHY Configuration 1 +#define EPHY_CFG2 0x0000000A // Ethernet PHY Configuration 2 +#define EPHY_CFG3 0x0000000B // Ethernet PHY Configuration 3 +#define EPHY_REGCTL 0x0000000D // Ethernet PHY Register Control +#define EPHY_ADDAR 0x0000000E // Ethernet PHY Address or Data +#define EPHY_STS 0x00000010 // Ethernet PHY Status +#define EPHY_SCR 0x00000011 // Ethernet PHY Specific Control +#define EPHY_MISR1 0x00000012 // Ethernet PHY MII Interrupt + // Status 1 +#define EPHY_MISR2 0x00000013 // Ethernet PHY MII Interrupt + // Status 2 +#define EPHY_FCSCR 0x00000014 // Ethernet PHY False Carrier Sense + // Counter +#define EPHY_RXERCNT 0x00000015 // Ethernet PHY Receive Error Count +#define EPHY_BISTCR 0x00000016 // Ethernet PHY BIST Control +#define EPHY_LEDCR 0x00000018 // Ethernet PHY LED Control +#define EPHY_CTL 0x00000019 // Ethernet PHY Control +#define EPHY_10BTSC 0x0000001A // Ethernet PHY 10Base-T + // Status/Control - MR26 +#define EPHY_BICSR1 0x0000001B // Ethernet PHY BIST Control and + // Status 1 +#define EPHY_BICSR2 0x0000001C // Ethernet PHY BIST Control and + // Status 2 +#define EPHY_CDCR 0x0000001E // Ethernet PHY Cable Diagnostic + // Control +#define EPHY_RCR 0x0000001F // Ethernet PHY Reset Control +#define EPHY_LEDCFG 0x00000025 // Ethernet PHY LED Configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_BMCR register. +// +//***************************************************************************** +#define EPHY_BMCR_MIIRESET 0x00008000 // MII Register reset +#define EPHY_BMCR_MIILOOPBK 0x00004000 // MII Loopback +#define EPHY_BMCR_SPEED 0x00002000 // Speed Select +#define EPHY_BMCR_ANEN 0x00001000 // Auto-Negotiate Enable +#define EPHY_BMCR_PWRDWN 0x00000800 // Power Down +#define EPHY_BMCR_ISOLATE 0x00000400 // Port Isolate +#define EPHY_BMCR_RESTARTAN 0x00000200 // Restart Auto-Negotiation +#define EPHY_BMCR_DUPLEXM 0x00000100 // Duplex Mode +#define EPHY_BMCR_COLLTST 0x00000080 // Collision Test + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_BMSR register. +// +//***************************************************************************** +#define EPHY_BMSR_100BTXFD 0x00004000 // 100Base-TX Full Duplex Capable +#define EPHY_BMSR_100BTXHD 0x00002000 // 100Base-TX Half Duplex Capable +#define EPHY_BMSR_10BTFD 0x00001000 // 10 Base-T Full Duplex Capable +#define EPHY_BMSR_10BTHD 0x00000800 // 10 Base-T Half Duplex Capable +#define EPHY_BMSR_MFPRESUP 0x00000040 // Preamble Suppression Capable +#define EPHY_BMSR_ANC 0x00000020 // Auto-Negotiation Complete +#define EPHY_BMSR_RFAULT 0x00000010 // Remote Fault +#define EPHY_BMSR_ANEN 0x00000008 // Auto Negotiation Enabled +#define EPHY_BMSR_LINKSTAT 0x00000004 // Link Status +#define EPHY_BMSR_JABBER 0x00000002 // Jabber Detect +#define EPHY_BMSR_EXTEN 0x00000001 // Extended Capability Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_ID1 register. +// +//***************************************************************************** +#define EPHY_ID1_OUIMSB_M 0x0000FFFF // OUI Most Significant Bits +#define EPHY_ID1_OUIMSB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_ID2 register. +// +//***************************************************************************** +#define EPHY_ID2_OUILSB_M 0x0000FC00 // OUI Least Significant Bits +#define EPHY_ID2_VNDRMDL_M 0x000003F0 // Vendor Model Number +#define EPHY_ID2_MDLREV_M 0x0000000F // Model Revision Number +#define EPHY_ID2_OUILSB_S 10 +#define EPHY_ID2_VNDRMDL_S 4 +#define EPHY_ID2_MDLREV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_ANA register. +// +//***************************************************************************** +#define EPHY_ANA_NP 0x00008000 // Next Page Indication +#define EPHY_ANA_RF 0x00002000 // Remote Fault +#define EPHY_ANA_ASMDUP 0x00000800 // Asymmetric PAUSE support for + // Full Duplex Links +#define EPHY_ANA_PAUSE 0x00000400 // PAUSE Support for Full Duplex + // Links +#define EPHY_ANA_100BT4 0x00000200 // 100Base-T4 Support +#define EPHY_ANA_100BTXFD 0x00000100 // 100Base-TX Full Duplex Support +#define EPHY_ANA_100BTX 0x00000080 // 100Base-TX Support +#define EPHY_ANA_10BTFD 0x00000040 // 10Base-T Full Duplex Support +#define EPHY_ANA_10BT 0x00000020 // 10Base-T Support +#define EPHY_ANA_SELECT_M 0x0000001F // Protocol Selection +#define EPHY_ANA_SELECT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_ANLPA register. +// +//***************************************************************************** +#define EPHY_ANLPA_NP 0x00008000 // Next Page Indication +#define EPHY_ANLPA_ACK 0x00004000 // Acknowledge +#define EPHY_ANLPA_RF 0x00002000 // Remote Fault +#define EPHY_ANLPA_ASMDUP 0x00000800 // Asymmetric PAUSE +#define EPHY_ANLPA_PAUSE 0x00000400 // PAUSE +#define EPHY_ANLPA_100BT4 0x00000200 // 100Base-T4 Support +#define EPHY_ANLPA_100BTXFD 0x00000100 // 100Base-TX Full Duplex Support +#define EPHY_ANLPA_100BTX 0x00000080 // 100Base-TX Support +#define EPHY_ANLPA_10BTFD 0x00000040 // 10Base-T Full Duplex Support +#define EPHY_ANLPA_10BT 0x00000020 // 10Base-T Support +#define EPHY_ANLPA_SELECT_M 0x0000001F // Protocol Selection +#define EPHY_ANLPA_SELECT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_ANER register. +// +//***************************************************************************** +#define EPHY_ANER_PDF 0x00000010 // Parallel Detection Fault +#define EPHY_ANER_LPNPABLE 0x00000008 // Link Partner Next Page Able +#define EPHY_ANER_NPABLE 0x00000004 // Next Page Able +#define EPHY_ANER_PAGERX 0x00000002 // Link Code Word Page Received +#define EPHY_ANER_LPANABLE 0x00000001 // Link Partner Auto-Negotiation + // Able + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_ANNPTR register. +// +//***************************************************************************** +#define EPHY_ANNPTR_NP 0x00008000 // Next Page Indication +#define EPHY_ANNPTR_MP 0x00002000 // Message Page +#define EPHY_ANNPTR_ACK2 0x00001000 // Acknowledge 2 +#define EPHY_ANNPTR_TOGTX 0x00000800 // Toggle +#define EPHY_ANNPTR_CODE_M 0x000007FF // Code +#define EPHY_ANNPTR_CODE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_ANLNPTR register. +// +//***************************************************************************** +#define EPHY_ANLNPTR_NP 0x00008000 // Next Page Indication +#define EPHY_ANLNPTR_ACK 0x00004000 // Acknowledge +#define EPHY_ANLNPTR_MP 0x00002000 // Message Page +#define EPHY_ANLNPTR_ACK2 0x00001000 // Acknowledge 2 +#define EPHY_ANLNPTR_TOG 0x00000800 // Toggle +#define EPHY_ANLNPTR_CODE_M 0x000007FF // Code +#define EPHY_ANLNPTR_CODE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_CFG1 register. +// +//***************************************************************************** +#define EPHY_CFG1_DONE 0x00008000 // Configuration Done +#define EPHY_CFG1_TDRAR 0x00000100 // TDR Auto-Run at Link Down +#define EPHY_CFG1_LLR 0x00000080 // Link Loss Recovery +#define EPHY_CFG1_FAMDIX 0x00000040 // Fast Auto MDI/MDIX +#define EPHY_CFG1_RAMDIX 0x00000020 // Robust Auto MDI/MDIX +#define EPHY_CFG1_FASTANEN 0x00000010 // Fast Auto Negotiation Enable +#define EPHY_CFG1_FANSEL_M 0x0000000C // Fast Auto-Negotiation Select + // Configuration +#define EPHY_CFG1_FANSEL_BLT80 0x00000000 // Break Link Timer: 80 ms +#define EPHY_CFG1_FANSEL_BLT120 0x00000004 // Break Link Timer: 120 ms +#define EPHY_CFG1_FANSEL_BLT240 0x00000008 // Break Link Timer: 240 ms +#define EPHY_CFG1_FRXDVDET 0x00000002 // FAST RXDV Detection + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_CFG2 register. +// +//***************************************************************************** +#define EPHY_CFG2_FLUPPD 0x00000040 // Fast Link-Up in Parallel Detect + // Mode +#define EPHY_CFG2_EXTFD 0x00000020 // Extended Full-Duplex Ability +#define EPHY_CFG2_ENLEDLINK 0x00000010 // Enhanced LED Functionality +#define EPHY_CFG2_ISOMIILL 0x00000008 // Isolate MII outputs when + // Enhanced Link is not Achievable +#define EPHY_CFG2_RXERRIDLE 0x00000004 // Detection of Receive Symbol + // Error During IDLE State +#define EPHY_CFG2_ODDNDETDIS 0x00000002 // Detection of Transmit Error + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_CFG3 register. +// +//***************************************************************************** +#define EPHY_CFG3_POLSWAP 0x00000080 // Polarity Swap +#define EPHY_CFG3_MDIMDIXS 0x00000040 // MDI/MDIX Swap +#define EPHY_CFG3_FLDWNM_M 0x0000001F // Fast Link Down Modes +#define EPHY_CFG3_FLDWNM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_REGCTL register. +// +//***************************************************************************** +#define EPHY_REGCTL_FUNC_M 0x0000C000 // Function +#define EPHY_REGCTL_FUNC_ADDR 0x00000000 // Address +#define EPHY_REGCTL_FUNC_DATANI 0x00004000 // Data, no post increment +#define EPHY_REGCTL_FUNC_DATAPIRW \ + 0x00008000 // Data, post increment on read and + // write +#define EPHY_REGCTL_FUNC_DATAPIWO \ + 0x0000C000 // Data, post increment on write + // only +#define EPHY_REGCTL_DEVAD_M 0x0000001F // Device Address +#define EPHY_REGCTL_DEVAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_ADDAR register. +// +//***************************************************************************** +#define EPHY_ADDAR_ADDRDATA_M 0x0000FFFF // Address or Data +#define EPHY_ADDAR_ADDRDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_STS register. +// +//***************************************************************************** +#define EPHY_STS_MDIXM 0x00004000 // MDI-X Mode +#define EPHY_STS_RXLERR 0x00002000 // Receive Error Latch +#define EPHY_STS_POLSTAT 0x00001000 // Polarity Status +#define EPHY_STS_FCSL 0x00000800 // False Carrier Sense Latch +#define EPHY_STS_SD 0x00000400 // Signal Detect +#define EPHY_STS_DL 0x00000200 // Descrambler Lock +#define EPHY_STS_PAGERX 0x00000100 // Link Code Page Received +#define EPHY_STS_MIIREQ 0x00000080 // MII Interrupt Pending +#define EPHY_STS_RF 0x00000040 // Remote Fault +#define EPHY_STS_JD 0x00000020 // Jabber Detect +#define EPHY_STS_ANS 0x00000010 // Auto-Negotiation Status +#define EPHY_STS_MIILB 0x00000008 // MII Loopback Status +#define EPHY_STS_DUPLEX 0x00000004 // Duplex Status +#define EPHY_STS_SPEED 0x00000002 // Speed Status +#define EPHY_STS_LINK 0x00000001 // Link Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_SCR register. +// +//***************************************************************************** +#define EPHY_SCR_DISCLK 0x00008000 // Disable CLK +#define EPHY_SCR_PSEN 0x00004000 // Power Saving Modes Enable +#define EPHY_SCR_PSMODE_M 0x00003000 // Power Saving Modes +#define EPHY_SCR_PSMODE_NORMAL 0x00000000 // Normal: Normal operation mode. + // PHY is fully functional +#define EPHY_SCR_PSMODE_LOWPWR 0x00001000 // IEEE Power Down +#define EPHY_SCR_PSMODE_ACTWOL 0x00002000 // Active Sleep +#define EPHY_SCR_PSMODE_PASWOL 0x00003000 // Passive Sleep +#define EPHY_SCR_SBPYASS 0x00000800 // Scrambler Bypass +#define EPHY_SCR_LBFIFO_M 0x00000300 // Loopback FIFO Depth +#define EPHY_SCR_LBFIFO_4 0x00000000 // Four nibble FIFO +#define EPHY_SCR_LBFIFO_5 0x00000100 // Five nibble FIFO +#define EPHY_SCR_LBFIFO_6 0x00000200 // Six nibble FIFO +#define EPHY_SCR_LBFIFO_8 0x00000300 // Eight nibble FIFO +#define EPHY_SCR_COLFDM 0x00000010 // Collision in Full-Duplex Mode +#define EPHY_SCR_TINT 0x00000004 // Test Interrupt +#define EPHY_SCR_INTEN 0x00000002 // Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_MISR1 register. +// +//***************************************************************************** +#define EPHY_MISR1_LINKSTAT 0x00002000 // Change of Link Status Interrupt +#define EPHY_MISR1_SPEED 0x00001000 // Change of Speed Status Interrupt +#define EPHY_MISR1_DUPLEXM 0x00000800 // Change of Duplex Status + // Interrupt +#define EPHY_MISR1_ANC 0x00000400 // Auto-Negotiation Complete + // Interrupt +#define EPHY_MISR1_FCHF 0x00000200 // False Carrier Counter Half-Full + // Interrupt +#define EPHY_MISR1_RXHF 0x00000100 // Receive Error Counter Half-Full + // Interrupt +#define EPHY_MISR1_LINKSTATEN 0x00000020 // Link Status Interrupt Enable +#define EPHY_MISR1_SPEEDEN 0x00000010 // Speed Change Interrupt Enable +#define EPHY_MISR1_DUPLEXMEN 0x00000008 // Duplex Status Interrupt Enable +#define EPHY_MISR1_ANCEN 0x00000004 // Auto-Negotiation Complete + // Interrupt Enable +#define EPHY_MISR1_FCHFEN 0x00000002 // False Carrier Counter Register + // half-full Interrupt Enable +#define EPHY_MISR1_RXHFEN 0x00000001 // Receive Error Counter Register + // Half-Full Event Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_MISR2 register. +// +//***************************************************************************** +#define EPHY_MISR2_ANERR 0x00004000 // Auto-Negotiation Error Interrupt +#define EPHY_MISR2_PAGERX 0x00002000 // Page Receive Interrupt +#define EPHY_MISR2_LBFIFO 0x00001000 // Loopback FIFO Overflow/Underflow + // Event Interrupt +#define EPHY_MISR2_MDICO 0x00000800 // MDI/MDIX Crossover Status + // Changed Interrupt +#define EPHY_MISR2_SLEEP 0x00000400 // Sleep Mode Event Interrupt +#define EPHY_MISR2_POLINT 0x00000200 // Polarity Changed Interrupt +#define EPHY_MISR2_JABBER 0x00000100 // Jabber Detect Event Interrupt +#define EPHY_MISR2_ANERREN 0x00000040 // Auto-Negotiation Error Interrupt + // Enable +#define EPHY_MISR2_PAGERXEN 0x00000020 // Page Receive Interrupt Enable +#define EPHY_MISR2_LBFIFOEN 0x00000010 // Loopback FIFO Overflow/Underflow + // Interrupt Enable +#define EPHY_MISR2_MDICOEN 0x00000008 // MDI/MDIX Crossover Status + // Changed Interrupt Enable +#define EPHY_MISR2_SLEEPEN 0x00000004 // Sleep Mode Event Interrupt + // Enable +#define EPHY_MISR2_POLINTEN 0x00000002 // Polarity Changed Interrupt + // Enable +#define EPHY_MISR2_JABBEREN 0x00000001 // Jabber Detect Event Interrupt + // Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_FCSCR register. +// +//***************************************************************************** +#define EPHY_FCSCR_FCSCNT_M 0x000000FF // False Carrier Event Counter +#define EPHY_FCSCR_FCSCNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_RXERCNT register. +// +//***************************************************************************** +#define EPHY_RXERCNT_RXERRCNT_M 0x0000FFFF // Receive Error Count +#define EPHY_RXERCNT_RXERRCNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_BISTCR register. +// +//***************************************************************************** +#define EPHY_BISTCR_PRBSM 0x00004000 // PRBS Single/Continuous Mode +#define EPHY_BISTCR_PRBSPKT 0x00002000 // Generated PRBS Packets +#define EPHY_BISTCR_PKTEN 0x00001000 // Packet Generation Enable +#define EPHY_BISTCR_PRBSCHKLK 0x00000800 // PRBS Checker Lock Indication +#define EPHY_BISTCR_PRBSCHKSYNC 0x00000400 // PRBS Checker Lock Sync Loss + // Indication +#define EPHY_BISTCR_PKTGENSTAT 0x00000200 // Packet Generator Status + // Indication +#define EPHY_BISTCR_PWRMODE 0x00000100 // Power Mode Indication +#define EPHY_BISTCR_TXMIILB 0x00000040 // Transmit Data in MII Loopback + // Mode +#define EPHY_BISTCR_LBMODE_M 0x0000001F // Loopback Mode Select +#define EPHY_BISTCR_LBMODE_NPCSIN \ + 0x00000001 // Near-end loopback: PCS Input + // Loopback +#define EPHY_BISTCR_LBMODE_NPCSOUT \ + 0x00000002 // Near-end loopback: PCS Output + // Loopback (In 100Base-TX only) +#define EPHY_BISTCR_LBMODE_NDIG 0x00000004 // Near-end loopback: Digital + // Loopback +#define EPHY_BISTCR_LBMODE_NANA 0x00000008 // Near-end loopback: Analog + // Loopback (requires 100 Ohm + // termination) +#define EPHY_BISTCR_LBMODE_FREV 0x00000010 // Far-end Loopback: Reverse + // Loopback + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_LEDCR register. +// +//***************************************************************************** +#define EPHY_LEDCR_BLINKRATE_M 0x00000600 // LED Blinking Rate (ON/OFF + // duration): +#define EPHY_LEDCR_BLINKRATE_20HZ \ + 0x00000000 // 20 Hz (50 ms) +#define EPHY_LEDCR_BLINKRATE_10HZ \ + 0x00000200 // 10 Hz (100 ms) +#define EPHY_LEDCR_BLINKRATE_5HZ \ + 0x00000400 // 5 Hz (200 ms) +#define EPHY_LEDCR_BLINKRATE_2HZ \ + 0x00000600 // 2 Hz (500 ms) + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_CTL register. +// +//***************************************************************************** +#define EPHY_CTL_AUTOMDI 0x00008000 // Auto-MDIX Enable +#define EPHY_CTL_FORCEMDI 0x00004000 // Force MDIX +#define EPHY_CTL_PAUSERX 0x00002000 // Pause Receive Negotiated Status +#define EPHY_CTL_PAUSETX 0x00001000 // Pause Transmit Negotiated Status +#define EPHY_CTL_MIILNKSTAT 0x00000800 // MII Link Status +#define EPHY_CTL_BYPLEDSTRCH 0x00000080 // Bypass LED Stretching + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_10BTSC register. +// +//***************************************************************************** +#define EPHY_10BTSC_RXTHEN 0x00002000 // Lower Receiver Threshold Enable +#define EPHY_10BTSC_SQUELCH_M 0x00001E00 // Squelch Configuration +#define EPHY_10BTSC_NLPDIS 0x00000080 // Normal Link Pulse (NLP) + // Transmission Control +#define EPHY_10BTSC_POLSTAT 0x00000010 // 10 Mb Polarity Status +#define EPHY_10BTSC_JABBERD 0x00000001 // Jabber Disable +#define EPHY_10BTSC_SQUELCH_S 9 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_BICSR1 register. +// +//***************************************************************************** +#define EPHY_BICSR1_ERRCNT_M 0x0000FF00 // BIST Error Count +#define EPHY_BICSR1_IPGLENGTH_M 0x000000FF // BIST IPG Length +#define EPHY_BICSR1_ERRCNT_S 8 +#define EPHY_BICSR1_IPGLENGTH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_BICSR2 register. +// +//***************************************************************************** +#define EPHY_BICSR2_PKTLENGTH_M 0x000007FF // BIST Packet Length +#define EPHY_BICSR2_PKTLENGTH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_CDCR register. +// +//***************************************************************************** +#define EPHY_CDCR_START 0x00008000 // Cable Diagnostic Process Start +#define EPHY_CDCR_LINKQUAL_M 0x00000300 // Link Quality Indication +#define EPHY_CDCR_LINKQUAL_GOOD 0x00000100 // Good Quality Link Indication +#define EPHY_CDCR_LINKQUAL_MILD 0x00000200 // Mid- Quality Link Indication +#define EPHY_CDCR_LINKQUAL_POOR 0x00000300 // Poor Quality Link Indication +#define EPHY_CDCR_DONE 0x00000002 // Cable Diagnostic Process Done +#define EPHY_CDCR_FAIL 0x00000001 // Cable Diagnostic Process Fail + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_RCR register. +// +//***************************************************************************** +#define EPHY_RCR_SWRST 0x00008000 // Software Reset +#define EPHY_RCR_SWRESTART 0x00004000 // Software Restart + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPHY_LEDCFG register. +// +//***************************************************************************** +#define EPHY_LEDCFG_LED2_M 0x00000F00 // LED2 Configuration +#define EPHY_LEDCFG_LED2_LINK 0x00000000 // Link OK +#define EPHY_LEDCFG_LED2_RXTX 0x00000100 // RX/TX Activity +#define EPHY_LEDCFG_LED2_TX 0x00000200 // TX Activity +#define EPHY_LEDCFG_LED2_RX 0x00000300 // RX Activity +#define EPHY_LEDCFG_LED2_COL 0x00000400 // Collision +#define EPHY_LEDCFG_LED2_100BT 0x00000500 // 100-Base TX +#define EPHY_LEDCFG_LED2_10BT 0x00000600 // 10-Base TX +#define EPHY_LEDCFG_LED2_FD 0x00000700 // Full Duplex +#define EPHY_LEDCFG_LED2_LINKTXRX \ + 0x00000800 // Link OK/Blink on TX/RX Activity +#define EPHY_LEDCFG_LED1_M 0x000000F0 // LED1 Configuration +#define EPHY_LEDCFG_LED1_LINK 0x00000000 // Link OK +#define EPHY_LEDCFG_LED1_RXTX 0x00000010 // RX/TX Activity +#define EPHY_LEDCFG_LED1_TX 0x00000020 // TX Activity +#define EPHY_LEDCFG_LED1_RX 0x00000030 // RX Activity +#define EPHY_LEDCFG_LED1_COL 0x00000040 // Collision +#define EPHY_LEDCFG_LED1_100BT 0x00000050 // 100-Base TX +#define EPHY_LEDCFG_LED1_10BT 0x00000060 // 10-Base TX +#define EPHY_LEDCFG_LED1_FD 0x00000070 // Full Duplex +#define EPHY_LEDCFG_LED1_LINKTXRX \ + 0x00000080 // Link OK/Blink on TX/RX Activity +#define EPHY_LEDCFG_LED0_M 0x0000000F // LED0 Configuration +#define EPHY_LEDCFG_LED0_LINK 0x00000000 // Link OK +#define EPHY_LEDCFG_LED0_RXTX 0x00000001 // RX/TX Activity +#define EPHY_LEDCFG_LED0_TX 0x00000002 // TX Activity +#define EPHY_LEDCFG_LED0_RX 0x00000003 // RX Activity +#define EPHY_LEDCFG_LED0_COL 0x00000004 // Collision +#define EPHY_LEDCFG_LED0_100BT 0x00000005 // 100-Base TX +#define EPHY_LEDCFG_LED0_10BT 0x00000006 // 10-Base TX +#define EPHY_LEDCFG_LED0_FD 0x00000007 // Full Duplex +#define EPHY_LEDCFG_LED0_LINKTXRX \ + 0x00000008 // Link OK/Blink on TX/RX Activity + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the +// EMAC_O_PPSCTRL register. +// +//***************************************************************************** +#define EMAC_PPSCTRL_PPSCTRL_1HZ \ + 0x00000000 // When the PPSEN0 bit = 0x0, the + // EN0PPS signal is 1 pulse of the + // PTP reference clock.(of width + // clk_ptp_i) every second +#define EMAC_PPSCTRL_PPSCTRL_2HZ \ + 0x00000001 // When the PPSEN0 bit = 0x0, the + // binary rollover is 2 Hz, and the + // digital rollover is 1 Hz +#define EMAC_PPSCTRL_PPSCTRL_4HZ \ + 0x00000002 // When the PPSEN0 bit = 0x0, the + // binary rollover is 4 Hz, and the + // digital rollover is 2 Hz +#define EMAC_PPSCTRL_PPSCTRL_8HZ \ + 0x00000003 // When thePPSEN0 bit = 0x0, the + // binary rollover is 8 Hz, and the + // digital rollover is 4 Hz, +#define EMAC_PPSCTRL_PPSCTRL_16HZ \ + 0x00000004 // When thePPSEN0 bit = 0x0, the + // binary rollover is 16 Hz, and + // the digital rollover is 8 Hz +#define EMAC_PPSCTRL_PPSCTRL_32HZ \ + 0x00000005 // When thePPSEN0 bit = 0x0, the + // binary rollover is 32 Hz, and + // the digital rollover is 16 Hz +#define EMAC_PPSCTRL_PPSCTRL_64HZ \ + 0x00000006 // When thePPSEN0 bit = 0x0, the + // binary rollover is 64 Hz, and + // the digital rollover is 32 Hz +#define EMAC_PPSCTRL_PPSCTRL_128HZ \ + 0x00000007 // When thePPSEN0 bit = 0x0, the + // binary rollover is 128 Hz, and + // the digital rollover is 64 Hz +#define EMAC_PPSCTRL_PPSCTRL_256HZ \ + 0x00000008 // When thePPSEN0 bit = 0x0, the + // binary rollover is 256 Hz, and + // the digital rollover is 128 Hz +#define EMAC_PPSCTRL_PPSCTRL_512HZ \ + 0x00000009 // When thePPSEN0 bit = 0x0, the + // binary rollover is 512 Hz, and + // the digital rollover is 256 Hz +#define EMAC_PPSCTRL_PPSCTRL_1024HZ \ + 0x0000000A // When the PPSEN0 bit = 0x0, the + // binary rollover is 1.024 kHz, + // and the digital rollover is 512 + // Hz +#define EMAC_PPSCTRL_PPSCTRL_2048HZ \ + 0x0000000B // When thePPSEN0 bit = 0x0, the + // binary rollover is 2.048 kHz, + // and the digital rollover is + // 1.024 kHz +#define EMAC_PPSCTRL_PPSCTRL_4096HZ \ + 0x0000000C // When thePPSEN0 bit = 0x0, the + // binary rollover is 4.096 kHz, + // and the digital rollover is + // 2.048 kHz +#define EMAC_PPSCTRL_PPSCTRL_8192HZ \ + 0x0000000D // When thePPSEN0 bit = 0x0, the + // binary rollover is 8.192 kHz, + // and the digital rollover is + // 4.096 kHz +#define EMAC_PPSCTRL_PPSCTRL_16384HZ \ + 0x0000000E // When thePPSEN0 bit = 0x0, the + // binary rollover is 16.384 kHz, + // and the digital rollover is + // 8.092 kHz +#define EMAC_PPSCTRL_PPSCTRL_32768HZ \ + 0x0000000F // When thePPSEN0 bit = 0x0, the + // binary rollover is 32.768 KHz, + // and the digital rollover is + // 16.384 KHz + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the EMAC_O_CC +// register. +// +//***************************************************************************** +#define EMAC_CC_CS_PA7 0x00000001 // GPIO + +#endif + +#endif // __HW_EMAC_H__ diff --git a/os/common/ext/TivaWare/inc/hw_epi.h b/os/common/ext/TivaWare/inc/hw_epi.h new file mode 100644 index 0000000..54b59c3 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_epi.h @@ -0,0 +1,933 @@ +//***************************************************************************** +// +// hw_epi.h - Macros for use in accessing the EPI registers. +// +// Copyright (c) 2008-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_EPI_H__ +#define __HW_EPI_H__ + +//***************************************************************************** +// +// The following are defines for the External Peripheral Interface register +// offsets. +// +//***************************************************************************** +#define EPI_O_CFG 0x00000000 // EPI Configuration +#define EPI_O_BAUD 0x00000004 // EPI Main Baud Rate +#define EPI_O_BAUD2 0x00000008 // EPI Main Baud Rate +#define EPI_O_HB16CFG 0x00000010 // EPI Host-Bus 16 Configuration +#define EPI_O_GPCFG 0x00000010 // EPI General-Purpose + // Configuration +#define EPI_O_SDRAMCFG 0x00000010 // EPI SDRAM Configuration +#define EPI_O_HB8CFG 0x00000010 // EPI Host-Bus 8 Configuration +#define EPI_O_HB8CFG2 0x00000014 // EPI Host-Bus 8 Configuration 2 +#define EPI_O_HB16CFG2 0x00000014 // EPI Host-Bus 16 Configuration 2 +#define EPI_O_ADDRMAP 0x0000001C // EPI Address Map +#define EPI_O_RSIZE0 0x00000020 // EPI Read Size 0 +#define EPI_O_RADDR0 0x00000024 // EPI Read Address 0 +#define EPI_O_RPSTD0 0x00000028 // EPI Non-Blocking Read Data 0 +#define EPI_O_RSIZE1 0x00000030 // EPI Read Size 1 +#define EPI_O_RADDR1 0x00000034 // EPI Read Address 1 +#define EPI_O_RPSTD1 0x00000038 // EPI Non-Blocking Read Data 1 +#define EPI_O_STAT 0x00000060 // EPI Status +#define EPI_O_RFIFOCNT 0x0000006C // EPI Read FIFO Count +#define EPI_O_READFIFO0 0x00000070 // EPI Read FIFO +#define EPI_O_READFIFO1 0x00000074 // EPI Read FIFO Alias 1 +#define EPI_O_READFIFO2 0x00000078 // EPI Read FIFO Alias 2 +#define EPI_O_READFIFO3 0x0000007C // EPI Read FIFO Alias 3 +#define EPI_O_READFIFO4 0x00000080 // EPI Read FIFO Alias 4 +#define EPI_O_READFIFO5 0x00000084 // EPI Read FIFO Alias 5 +#define EPI_O_READFIFO6 0x00000088 // EPI Read FIFO Alias 6 +#define EPI_O_READFIFO7 0x0000008C // EPI Read FIFO Alias 7 +#define EPI_O_FIFOLVL 0x00000200 // EPI FIFO Level Selects +#define EPI_O_WFIFOCNT 0x00000204 // EPI Write FIFO Count +#define EPI_O_DMATXCNT 0x00000208 // EPI DMA Transmit Count +#define EPI_O_IM 0x00000210 // EPI Interrupt Mask +#define EPI_O_RIS 0x00000214 // EPI Raw Interrupt Status +#define EPI_O_MIS 0x00000218 // EPI Masked Interrupt Status +#define EPI_O_EISC 0x0000021C // EPI Error and Interrupt Status + // and Clear +#define EPI_O_HB8CFG3 0x00000308 // EPI Host-Bus 8 Configuration 3 +#define EPI_O_HB16CFG3 0x00000308 // EPI Host-Bus 16 Configuration 3 +#define EPI_O_HB16CFG4 0x0000030C // EPI Host-Bus 16 Configuration 4 +#define EPI_O_HB8CFG4 0x0000030C // EPI Host-Bus 8 Configuration 4 +#define EPI_O_HB8TIME 0x00000310 // EPI Host-Bus 8 Timing Extension +#define EPI_O_HB16TIME 0x00000310 // EPI Host-Bus 16 Timing Extension +#define EPI_O_HB8TIME2 0x00000314 // EPI Host-Bus 8 Timing Extension +#define EPI_O_HB16TIME2 0x00000314 // EPI Host-Bus 16 Timing Extension +#define EPI_O_HB16TIME3 0x00000318 // EPI Host-Bus 16 Timing Extension +#define EPI_O_HB8TIME3 0x00000318 // EPI Host-Bus 8 Timing Extension +#define EPI_O_HB8TIME4 0x0000031C // EPI Host-Bus 8 Timing Extension +#define EPI_O_HB16TIME4 0x0000031C // EPI Host-Bus 16 Timing Extension +#define EPI_O_HBPSRAM 0x00000360 // EPI Host-Bus PSRAM + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_CFG register. +// +//***************************************************************************** +#define EPI_CFG_INTDIV 0x00000100 // Integer Clock Divider Enable +#define EPI_CFG_BLKEN 0x00000010 // Block Enable +#define EPI_CFG_MODE_M 0x0000000F // Mode Select +#define EPI_CFG_MODE_NONE 0x00000000 // General Purpose +#define EPI_CFG_MODE_SDRAM 0x00000001 // SDRAM +#define EPI_CFG_MODE_HB8 0x00000002 // 8-Bit Host-Bus (HB8) +#define EPI_CFG_MODE_HB16 0x00000003 // 16-Bit Host-Bus (HB16) + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_BAUD register. +// +//***************************************************************************** +#define EPI_BAUD_COUNT1_M 0xFFFF0000 // Baud Rate Counter 1 +#define EPI_BAUD_COUNT0_M 0x0000FFFF // Baud Rate Counter 0 +#define EPI_BAUD_COUNT1_S 16 +#define EPI_BAUD_COUNT0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_BAUD2 register. +// +//***************************************************************************** +#define EPI_BAUD2_COUNT1_M 0xFFFF0000 // CS3n Baud Rate Counter 1 +#define EPI_BAUD2_COUNT0_M 0x0000FFFF // CS2n Baud Rate Counter 0 +#define EPI_BAUD2_COUNT1_S 16 +#define EPI_BAUD2_COUNT0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB16CFG register. +// +//***************************************************************************** +#define EPI_HB16CFG_CLKGATE 0x80000000 // Clock Gated +#define EPI_HB16CFG_CLKGATEI 0x40000000 // Clock Gated Idle +#define EPI_HB16CFG_CLKINV 0x20000000 // Invert Output Clock Enable +#define EPI_HB16CFG_RDYEN 0x10000000 // Input Ready Enable +#define EPI_HB16CFG_IRDYINV 0x08000000 // Input Ready Invert +#define EPI_HB16CFG_XFFEN 0x00800000 // External FIFO FULL Enable +#define EPI_HB16CFG_XFEEN 0x00400000 // External FIFO EMPTY Enable +#define EPI_HB16CFG_WRHIGH 0x00200000 // WRITE Strobe Polarity +#define EPI_HB16CFG_RDHIGH 0x00100000 // READ Strobe Polarity +#define EPI_HB16CFG_ALEHIGH 0x00080000 // ALE Strobe Polarity +#define EPI_HB16CFG_WRCRE 0x00040000 // PSRAM Configuration Register + // Write +#define EPI_HB16CFG_RDCRE 0x00020000 // PSRAM Configuration Register + // Read +#define EPI_HB16CFG_BURST 0x00010000 // Burst Mode +#define EPI_HB16CFG_MAXWAIT_M 0x0000FF00 // Maximum Wait +#define EPI_HB16CFG_WRWS_M 0x000000C0 // Write Wait States +#define EPI_HB16CFG_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks +#define EPI_HB16CFG_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks +#define EPI_HB16CFG_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks +#define EPI_HB16CFG_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks +#define EPI_HB16CFG_RDWS_M 0x00000030 // Read Wait States +#define EPI_HB16CFG_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks +#define EPI_HB16CFG_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks +#define EPI_HB16CFG_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks +#define EPI_HB16CFG_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks +#define EPI_HB16CFG_BSEL 0x00000004 // Byte Select Configuration +#define EPI_HB16CFG_MODE_M 0x00000003 // Host Bus Sub-Mode +#define EPI_HB16CFG_MODE_ADMUX 0x00000000 // ADMUX - AD[15:0] +#define EPI_HB16CFG_MODE_ADNMUX 0x00000001 // ADNONMUX - D[15:0] +#define EPI_HB16CFG_MODE_SRAM 0x00000002 // Continuous Read - D[15:0] +#define EPI_HB16CFG_MODE_XFIFO 0x00000003 // XFIFO - D[15:0] +#define EPI_HB16CFG_MAXWAIT_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_GPCFG register. +// +//***************************************************************************** +#define EPI_GPCFG_CLKPIN 0x80000000 // Clock Pin +#define EPI_GPCFG_CLKGATE 0x40000000 // Clock Gated +#define EPI_GPCFG_FRM50 0x04000000 // 50/50 Frame +#define EPI_GPCFG_FRMCNT_M 0x03C00000 // Frame Count +#define EPI_GPCFG_WR2CYC 0x00080000 // 2-Cycle Writes +#define EPI_GPCFG_ASIZE_M 0x00000030 // Address Bus Size +#define EPI_GPCFG_ASIZE_NONE 0x00000000 // No address +#define EPI_GPCFG_ASIZE_4BIT 0x00000010 // Up to 4 bits wide +#define EPI_GPCFG_ASIZE_12BIT 0x00000020 // Up to 12 bits wide. This size + // cannot be used with 24-bit data +#define EPI_GPCFG_ASIZE_20BIT 0x00000030 // Up to 20 bits wide. This size + // cannot be used with data sizes + // other than 8 +#define EPI_GPCFG_DSIZE_M 0x00000003 // Size of Data Bus +#define EPI_GPCFG_DSIZE_4BIT 0x00000000 // 8 Bits Wide (EPI0S0 to EPI0S7) +#define EPI_GPCFG_DSIZE_16BIT 0x00000001 // 16 Bits Wide (EPI0S0 to EPI0S15) +#define EPI_GPCFG_DSIZE_24BIT 0x00000002 // 24 Bits Wide (EPI0S0 to EPI0S23) +#define EPI_GPCFG_DSIZE_32BIT 0x00000003 // 32 Bits Wide (EPI0S0 to EPI0S31) +#define EPI_GPCFG_FRMCNT_S 22 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_SDRAMCFG register. +// +//***************************************************************************** +#define EPI_SDRAMCFG_FREQ_M 0xC0000000 // EPI Frequency Range +#define EPI_SDRAMCFG_FREQ_NONE 0x00000000 // 0 - 15 MHz +#define EPI_SDRAMCFG_FREQ_15MHZ 0x40000000 // 15 - 30 MHz +#define EPI_SDRAMCFG_FREQ_30MHZ 0x80000000 // 30 - 50 MHz +#define EPI_SDRAMCFG_RFSH_M 0x07FF0000 // Refresh Counter +#define EPI_SDRAMCFG_SLEEP 0x00000200 // Sleep Mode +#define EPI_SDRAMCFG_SIZE_M 0x00000003 // Size of SDRAM +#define EPI_SDRAMCFG_SIZE_8MB 0x00000000 // 64 megabits (8MB) +#define EPI_SDRAMCFG_SIZE_16MB 0x00000001 // 128 megabits (16MB) +#define EPI_SDRAMCFG_SIZE_32MB 0x00000002 // 256 megabits (32MB) +#define EPI_SDRAMCFG_SIZE_64MB 0x00000003 // 512 megabits (64MB) +#define EPI_SDRAMCFG_RFSH_S 16 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB8CFG register. +// +//***************************************************************************** +#define EPI_HB8CFG_CLKGATE 0x80000000 // Clock Gated +#define EPI_HB8CFG_CLKGATEI 0x40000000 // Clock Gated when Idle +#define EPI_HB8CFG_CLKINV 0x20000000 // Invert Output Clock Enable +#define EPI_HB8CFG_RDYEN 0x10000000 // Input Ready Enable +#define EPI_HB8CFG_IRDYINV 0x08000000 // Input Ready Invert +#define EPI_HB8CFG_XFFEN 0x00800000 // External FIFO FULL Enable +#define EPI_HB8CFG_XFEEN 0x00400000 // External FIFO EMPTY Enable +#define EPI_HB8CFG_WRHIGH 0x00200000 // WRITE Strobe Polarity +#define EPI_HB8CFG_RDHIGH 0x00100000 // READ Strobe Polarity +#define EPI_HB8CFG_ALEHIGH 0x00080000 // ALE Strobe Polarity +#define EPI_HB8CFG_MAXWAIT_M 0x0000FF00 // Maximum Wait +#define EPI_HB8CFG_WRWS_M 0x000000C0 // Write Wait States +#define EPI_HB8CFG_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks +#define EPI_HB8CFG_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks +#define EPI_HB8CFG_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks +#define EPI_HB8CFG_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks +#define EPI_HB8CFG_RDWS_M 0x00000030 // Read Wait States +#define EPI_HB8CFG_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks +#define EPI_HB8CFG_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks +#define EPI_HB8CFG_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks +#define EPI_HB8CFG_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks +#define EPI_HB8CFG_MODE_M 0x00000003 // Host Bus Sub-Mode +#define EPI_HB8CFG_MODE_MUX 0x00000000 // ADMUX - AD[7:0] +#define EPI_HB8CFG_MODE_NMUX 0x00000001 // ADNONMUX - D[7:0] +#define EPI_HB8CFG_MODE_SRAM 0x00000002 // Continuous Read - D[7:0] +#define EPI_HB8CFG_MODE_FIFO 0x00000003 // XFIFO - D[7:0] +#define EPI_HB8CFG_MAXWAIT_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB8CFG2 register. +// +//***************************************************************************** +#define EPI_HB8CFG2_CSCFGEXT 0x08000000 // Chip Select Extended + // Configuration +#define EPI_HB8CFG2_CSBAUD 0x04000000 // Chip Select Baud Rate and + // Multiple Sub-Mode Configuration + // enable +#define EPI_HB8CFG2_CSCFG_M 0x03000000 // Chip Select Configuration +#define EPI_HB8CFG2_CSCFG_ALE 0x00000000 // ALE Configuration +#define EPI_HB8CFG2_CSCFG_CS 0x01000000 // CSn Configuration +#define EPI_HB8CFG2_CSCFG_DCS 0x02000000 // Dual CSn Configuration +#define EPI_HB8CFG2_CSCFG_ADCS 0x03000000 // ALE with Dual CSn Configuration +#define EPI_HB8CFG2_WRHIGH 0x00200000 // CS1n WRITE Strobe Polarity +#define EPI_HB8CFG2_RDHIGH 0x00100000 // CS1n READ Strobe Polarity +#define EPI_HB8CFG2_ALEHIGH 0x00080000 // CS1n ALE Strobe Polarity +#define EPI_HB8CFG2_WRWS_M 0x000000C0 // CS1n Write Wait States +#define EPI_HB8CFG2_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks +#define EPI_HB8CFG2_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks +#define EPI_HB8CFG2_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks +#define EPI_HB8CFG2_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks +#define EPI_HB8CFG2_RDWS_M 0x00000030 // CS1n Read Wait States +#define EPI_HB8CFG2_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks +#define EPI_HB8CFG2_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks +#define EPI_HB8CFG2_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks +#define EPI_HB8CFG2_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks +#define EPI_HB8CFG2_MODE_M 0x00000003 // CS1n Host Bus Sub-Mode +#define EPI_HB8CFG2_MODE_ADMUX 0x00000000 // ADMUX - AD[7:0] +#define EPI_HB8CFG2_MODE_AD 0x00000001 // ADNONMUX - D[7:0] + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB16CFG2 register. +// +//***************************************************************************** +#define EPI_HB16CFG2_CSCFGEXT 0x08000000 // Chip Select Extended + // Configuration +#define EPI_HB16CFG2_CSBAUD 0x04000000 // Chip Select Baud Rate and + // Multiple Sub-Mode Configuration + // enable +#define EPI_HB16CFG2_CSCFG_M 0x03000000 // Chip Select Configuration +#define EPI_HB16CFG2_CSCFG_ALE 0x00000000 // ALE Configuration +#define EPI_HB16CFG2_CSCFG_CS 0x01000000 // CSn Configuration +#define EPI_HB16CFG2_CSCFG_DCS 0x02000000 // Dual CSn Configuration +#define EPI_HB16CFG2_CSCFG_ADCS 0x03000000 // ALE with Dual CSn Configuration +#define EPI_HB16CFG2_WRHIGH 0x00200000 // CS1n WRITE Strobe Polarity +#define EPI_HB16CFG2_RDHIGH 0x00100000 // CS1n READ Strobe Polarity +#define EPI_HB16CFG2_ALEHIGH 0x00080000 // CS1n ALE Strobe Polarity +#define EPI_HB16CFG2_WRCRE 0x00040000 // CS1n PSRAM Configuration + // Register Write +#define EPI_HB16CFG2_RDCRE 0x00020000 // CS1n PSRAM Configuration + // Register Read +#define EPI_HB16CFG2_BURST 0x00010000 // CS1n Burst Mode +#define EPI_HB16CFG2_WRWS_M 0x000000C0 // CS1n Write Wait States +#define EPI_HB16CFG2_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks +#define EPI_HB16CFG2_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks +#define EPI_HB16CFG2_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks +#define EPI_HB16CFG2_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks +#define EPI_HB16CFG2_RDWS_M 0x00000030 // CS1n Read Wait States +#define EPI_HB16CFG2_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks +#define EPI_HB16CFG2_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks +#define EPI_HB16CFG2_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks +#define EPI_HB16CFG2_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks +#define EPI_HB16CFG2_MODE_M 0x00000003 // CS1n Host Bus Sub-Mode +#define EPI_HB16CFG2_MODE_ADMUX 0x00000000 // ADMUX - AD[15:0] +#define EPI_HB16CFG2_MODE_AD 0x00000001 // ADNONMUX - D[15:0] + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_ADDRMAP register. +// +//***************************************************************************** +#define EPI_ADDRMAP_ECSZ_M 0x00000C00 // External Code Size +#define EPI_ADDRMAP_ECSZ_256B 0x00000000 // 256 bytes; lower address range: + // 0x00 to 0xFF +#define EPI_ADDRMAP_ECSZ_64KB 0x00000400 // 64 KB; lower address range: + // 0x0000 to 0xFFFF +#define EPI_ADDRMAP_ECSZ_16MB 0x00000800 // 16 MB; lower address range: + // 0x00.0000 to 0xFF.FFFF +#define EPI_ADDRMAP_ECSZ_256MB 0x00000C00 // 256MB; lower address range: + // 0x000.0000 to 0x0FFF.FFFF +#define EPI_ADDRMAP_ECADR_M 0x00000300 // External Code Address +#define EPI_ADDRMAP_ECADR_NONE 0x00000000 // Not mapped +#define EPI_ADDRMAP_ECADR_1000 0x00000100 // At 0x1000.0000 +#define EPI_ADDRMAP_EPSZ_M 0x000000C0 // External Peripheral Size +#define EPI_ADDRMAP_EPSZ_256B 0x00000000 // 256 bytes; lower address range: + // 0x00 to 0xFF +#define EPI_ADDRMAP_EPSZ_64KB 0x00000040 // 64 KB; lower address range: + // 0x0000 to 0xFFFF +#define EPI_ADDRMAP_EPSZ_16MB 0x00000080 // 16 MB; lower address range: + // 0x00.0000 to 0xFF.FFFF +#define EPI_ADDRMAP_EPSZ_256MB 0x000000C0 // 256 MB; lower address range: + // 0x000.0000 to 0xFFF.FFFF +#define EPI_ADDRMAP_EPADR_M 0x00000030 // External Peripheral Address +#define EPI_ADDRMAP_EPADR_NONE 0x00000000 // Not mapped +#define EPI_ADDRMAP_EPADR_A000 0x00000010 // At 0xA000.0000 +#define EPI_ADDRMAP_EPADR_C000 0x00000020 // At 0xC000.0000 +#define EPI_ADDRMAP_EPADR_HBQS 0x00000030 // Only to be used with Host Bus + // quad chip select. In quad chip + // select mode, CS2n maps to + // 0xA000.0000 and CS3n maps to + // 0xC000.0000 +#define EPI_ADDRMAP_ERSZ_M 0x0000000C // External RAM Size +#define EPI_ADDRMAP_ERSZ_256B 0x00000000 // 256 bytes; lower address range: + // 0x00 to 0xFF +#define EPI_ADDRMAP_ERSZ_64KB 0x00000004 // 64 KB; lower address range: + // 0x0000 to 0xFFFF +#define EPI_ADDRMAP_ERSZ_16MB 0x00000008 // 16 MB; lower address range: + // 0x00.0000 to 0xFF.FFFF +#define EPI_ADDRMAP_ERSZ_256MB 0x0000000C // 256 MB; lower address range: + // 0x000.0000 to 0xFFF.FFFF +#define EPI_ADDRMAP_ERADR_M 0x00000003 // External RAM Address +#define EPI_ADDRMAP_ERADR_NONE 0x00000000 // Not mapped +#define EPI_ADDRMAP_ERADR_6000 0x00000001 // At 0x6000.0000 +#define EPI_ADDRMAP_ERADR_8000 0x00000002 // At 0x8000.0000 +#define EPI_ADDRMAP_ERADR_HBQS 0x00000003 // Only to be used with Host Bus + // quad chip select. In quad chip + // select mode, CS0n maps to + // 0x6000.0000 and CS1n maps to + // 0x8000.0000 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RSIZE0 register. +// +//***************************************************************************** +#define EPI_RSIZE0_SIZE_M 0x00000003 // Current Size +#define EPI_RSIZE0_SIZE_8BIT 0x00000001 // Byte (8 bits) +#define EPI_RSIZE0_SIZE_16BIT 0x00000002 // Half-word (16 bits) +#define EPI_RSIZE0_SIZE_32BIT 0x00000003 // Word (32 bits) + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RADDR0 register. +// +//***************************************************************************** +#define EPI_RADDR0_ADDR_M 0xFFFFFFFF // Current Address +#define EPI_RADDR0_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RPSTD0 register. +// +//***************************************************************************** +#define EPI_RPSTD0_POSTCNT_M 0x00001FFF // Post Count +#define EPI_RPSTD0_POSTCNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RSIZE1 register. +// +//***************************************************************************** +#define EPI_RSIZE1_SIZE_M 0x00000003 // Current Size +#define EPI_RSIZE1_SIZE_8BIT 0x00000001 // Byte (8 bits) +#define EPI_RSIZE1_SIZE_16BIT 0x00000002 // Half-word (16 bits) +#define EPI_RSIZE1_SIZE_32BIT 0x00000003 // Word (32 bits) + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RADDR1 register. +// +//***************************************************************************** +#define EPI_RADDR1_ADDR_M 0xFFFFFFFF // Current Address +#define EPI_RADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RPSTD1 register. +// +//***************************************************************************** +#define EPI_RPSTD1_POSTCNT_M 0x00001FFF // Post Count +#define EPI_RPSTD1_POSTCNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_STAT register. +// +//***************************************************************************** +#define EPI_STAT_XFFULL 0x00000100 // External FIFO Full +#define EPI_STAT_XFEMPTY 0x00000080 // External FIFO Empty +#define EPI_STAT_INITSEQ 0x00000040 // Initialization Sequence +#define EPI_STAT_WBUSY 0x00000020 // Write Busy +#define EPI_STAT_NBRBUSY 0x00000010 // Non-Blocking Read Busy +#define EPI_STAT_ACTIVE 0x00000001 // Register Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RFIFOCNT register. +// +//***************************************************************************** +#define EPI_RFIFOCNT_COUNT_M 0x0000000F // FIFO Count +#define EPI_RFIFOCNT_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO0 +// register. +// +//***************************************************************************** +#define EPI_READFIFO0_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO0_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO1 +// register. +// +//***************************************************************************** +#define EPI_READFIFO1_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO2 +// register. +// +//***************************************************************************** +#define EPI_READFIFO2_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO3 +// register. +// +//***************************************************************************** +#define EPI_READFIFO3_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO3_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO4 +// register. +// +//***************************************************************************** +#define EPI_READFIFO4_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO4_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO5 +// register. +// +//***************************************************************************** +#define EPI_READFIFO5_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO5_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO6 +// register. +// +//***************************************************************************** +#define EPI_READFIFO6_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO6_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_READFIFO7 +// register. +// +//***************************************************************************** +#define EPI_READFIFO7_DATA_M 0xFFFFFFFF // Reads Data +#define EPI_READFIFO7_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_FIFOLVL register. +// +//***************************************************************************** +#define EPI_FIFOLVL_WFERR 0x00020000 // Write Full Error +#define EPI_FIFOLVL_RSERR 0x00010000 // Read Stall Error +#define EPI_FIFOLVL_WRFIFO_M 0x00000070 // Write FIFO +#define EPI_FIFOLVL_WRFIFO_EMPT 0x00000000 // Interrupt is triggered while + // WRFIFO is empty. +#define EPI_FIFOLVL_WRFIFO_2 0x00000020 // Interrupt is triggered until + // there are only two slots + // available. Thus, trigger is + // deasserted when there are two + // WRFIFO entries present. This + // configuration is optimized for + // bursts of 2 +#define EPI_FIFOLVL_WRFIFO_1 0x00000030 // Interrupt is triggered until + // there is one WRFIFO entry + // available. This configuration + // expects only single writes +#define EPI_FIFOLVL_WRFIFO_NFULL \ + 0x00000040 // Trigger interrupt when WRFIFO is + // not full, meaning trigger will + // continue to assert until there + // are four entries in the WRFIFO +#define EPI_FIFOLVL_RDFIFO_M 0x00000007 // Read FIFO +#define EPI_FIFOLVL_RDFIFO_EMPT 0x00000000 // Empty +#define EPI_FIFOLVL_RDFIFO_1 0x00000001 // Trigger when there are 1 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_2 0x00000002 // Trigger when there are 2 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_4 0x00000003 // Trigger when there are 4 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_6 0x00000004 // Trigger when there are 6 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_7 0x00000005 // Trigger when there are 7 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_8 0x00000006 // Trigger when there are 8 entries + // in the NBRFIFO + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_WFIFOCNT register. +// +//***************************************************************************** +#define EPI_WFIFOCNT_WTAV_M 0x00000007 // Available Write Transactions +#define EPI_WFIFOCNT_WTAV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_DMATXCNT register. +// +//***************************************************************************** +#define EPI_DMATXCNT_TXCNT_M 0x0000FFFF // DMA Count +#define EPI_DMATXCNT_TXCNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_IM register. +// +//***************************************************************************** +#define EPI_IM_DMAWRIM 0x00000010 // Write uDMA Interrupt Mask +#define EPI_IM_DMARDIM 0x00000008 // Read uDMA Interrupt Mask +#define EPI_IM_WRIM 0x00000004 // Write FIFO Empty Interrupt Mask +#define EPI_IM_RDIM 0x00000002 // Read FIFO Full Interrupt Mask +#define EPI_IM_ERRIM 0x00000001 // Error Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_RIS register. +// +//***************************************************************************** +#define EPI_RIS_DMAWRRIS 0x00000010 // Write uDMA Raw Interrupt Status +#define EPI_RIS_DMARDRIS 0x00000008 // Read uDMA Raw Interrupt Status +#define EPI_RIS_WRRIS 0x00000004 // Write Raw Interrupt Status +#define EPI_RIS_RDRIS 0x00000002 // Read Raw Interrupt Status +#define EPI_RIS_ERRRIS 0x00000001 // Error Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_MIS register. +// +//***************************************************************************** +#define EPI_MIS_DMAWRMIS 0x00000010 // Write uDMA Masked Interrupt + // Status +#define EPI_MIS_DMARDMIS 0x00000008 // Read uDMA Masked Interrupt + // Status +#define EPI_MIS_WRMIS 0x00000004 // Write Masked Interrupt Status +#define EPI_MIS_RDMIS 0x00000002 // Read Masked Interrupt Status +#define EPI_MIS_ERRMIS 0x00000001 // Error Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_EISC register. +// +//***************************************************************************** +#define EPI_EISC_DMAWRIC 0x00000010 // Write uDMA Interrupt Clear +#define EPI_EISC_DMARDIC 0x00000008 // Read uDMA Interrupt Clear +#define EPI_EISC_WTFULL 0x00000004 // Write FIFO Full Error +#define EPI_EISC_RSTALL 0x00000002 // Read Stalled Error +#define EPI_EISC_TOUT 0x00000001 // Timeout Error + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB8CFG3 register. +// +//***************************************************************************** +#define EPI_HB8CFG3_WRHIGH 0x00200000 // CS2n WRITE Strobe Polarity +#define EPI_HB8CFG3_RDHIGH 0x00100000 // CS2n READ Strobe Polarity +#define EPI_HB8CFG3_ALEHIGH 0x00080000 // CS2n ALE Strobe Polarity +#define EPI_HB8CFG3_WRWS_M 0x000000C0 // CS2n Write Wait States +#define EPI_HB8CFG3_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks +#define EPI_HB8CFG3_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks +#define EPI_HB8CFG3_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks +#define EPI_HB8CFG3_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks +#define EPI_HB8CFG3_RDWS_M 0x00000030 // CS2n Read Wait States +#define EPI_HB8CFG3_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks +#define EPI_HB8CFG3_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks +#define EPI_HB8CFG3_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks +#define EPI_HB8CFG3_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks +#define EPI_HB8CFG3_MODE_M 0x00000003 // CS2n Host Bus Sub-Mode +#define EPI_HB8CFG3_MODE_ADMUX 0x00000000 // ADMUX - AD[7:0] +#define EPI_HB8CFG3_MODE_AD 0x00000001 // ADNONMUX - D[7:0] + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB16CFG3 register. +// +//***************************************************************************** +#define EPI_HB16CFG3_WRHIGH 0x00200000 // CS2n WRITE Strobe Polarity +#define EPI_HB16CFG3_RDHIGH 0x00100000 // CS2n READ Strobe Polarity +#define EPI_HB16CFG3_ALEHIGH 0x00080000 // CS2n ALE Strobe Polarity +#define EPI_HB16CFG3_WRCRE 0x00040000 // CS2n PSRAM Configuration + // Register Write +#define EPI_HB16CFG3_RDCRE 0x00020000 // CS2n PSRAM Configuration + // Register Read +#define EPI_HB16CFG3_BURST 0x00010000 // CS2n Burst Mode +#define EPI_HB16CFG3_WRWS_M 0x000000C0 // CS2n Write Wait States +#define EPI_HB16CFG3_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks +#define EPI_HB16CFG3_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks +#define EPI_HB16CFG3_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks +#define EPI_HB16CFG3_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks +#define EPI_HB16CFG3_RDWS_M 0x00000030 // CS2n Read Wait States +#define EPI_HB16CFG3_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks +#define EPI_HB16CFG3_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks +#define EPI_HB16CFG3_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks +#define EPI_HB16CFG3_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks +#define EPI_HB16CFG3_MODE_M 0x00000003 // CS2n Host Bus Sub-Mode +#define EPI_HB16CFG3_MODE_ADMUX 0x00000000 // ADMUX - AD[15:0] +#define EPI_HB16CFG3_MODE_AD 0x00000001 // ADNONMUX - D[15:0] + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB16CFG4 register. +// +//***************************************************************************** +#define EPI_HB16CFG4_WRHIGH 0x00200000 // CS3n WRITE Strobe Polarity +#define EPI_HB16CFG4_RDHIGH 0x00100000 // CS3n READ Strobe Polarity +#define EPI_HB16CFG4_ALEHIGH 0x00080000 // CS3n ALE Strobe Polarity +#define EPI_HB16CFG4_WRCRE 0x00040000 // CS3n PSRAM Configuration + // Register Write +#define EPI_HB16CFG4_RDCRE 0x00020000 // CS3n PSRAM Configuration + // Register Read +#define EPI_HB16CFG4_BURST 0x00010000 // CS3n Burst Mode +#define EPI_HB16CFG4_WRWS_M 0x000000C0 // CS3n Write Wait States +#define EPI_HB16CFG4_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks +#define EPI_HB16CFG4_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks +#define EPI_HB16CFG4_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks +#define EPI_HB16CFG4_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks +#define EPI_HB16CFG4_RDWS_M 0x00000030 // CS3n Read Wait States +#define EPI_HB16CFG4_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks +#define EPI_HB16CFG4_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks +#define EPI_HB16CFG4_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks +#define EPI_HB16CFG4_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks +#define EPI_HB16CFG4_MODE_M 0x00000003 // CS3n Host Bus Sub-Mode +#define EPI_HB16CFG4_MODE_ADMUX 0x00000000 // ADMUX - AD[15:0] +#define EPI_HB16CFG4_MODE_AD 0x00000001 // ADNONMUX - D[15:0] + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB8CFG4 register. +// +//***************************************************************************** +#define EPI_HB8CFG4_WRHIGH 0x00200000 // CS3n WRITE Strobe Polarity +#define EPI_HB8CFG4_RDHIGH 0x00100000 // CS2n READ Strobe Polarity +#define EPI_HB8CFG4_ALEHIGH 0x00080000 // CS3n ALE Strobe Polarity +#define EPI_HB8CFG4_WRWS_M 0x000000C0 // CS3n Write Wait States +#define EPI_HB8CFG4_WRWS_2 0x00000000 // Active WRn is 2 EPI clocks +#define EPI_HB8CFG4_WRWS_4 0x00000040 // Active WRn is 4 EPI clocks +#define EPI_HB8CFG4_WRWS_6 0x00000080 // Active WRn is 6 EPI clocks +#define EPI_HB8CFG4_WRWS_8 0x000000C0 // Active WRn is 8 EPI clocks +#define EPI_HB8CFG4_RDWS_M 0x00000030 // CS3n Read Wait States +#define EPI_HB8CFG4_RDWS_2 0x00000000 // Active RDn is 2 EPI clocks +#define EPI_HB8CFG4_RDWS_4 0x00000010 // Active RDn is 4 EPI clocks +#define EPI_HB8CFG4_RDWS_6 0x00000020 // Active RDn is 6 EPI clocks +#define EPI_HB8CFG4_RDWS_8 0x00000030 // Active RDn is 8 EPI clocks +#define EPI_HB8CFG4_MODE_M 0x00000003 // CS3n Host Bus Sub-Mode +#define EPI_HB8CFG4_MODE_ADMUX 0x00000000 // ADMUX - AD[7:0] +#define EPI_HB8CFG4_MODE_AD 0x00000001 // ADNONMUX - D[7:0] + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB8TIME register. +// +//***************************************************************************** +#define EPI_HB8TIME_IRDYDLY_M 0x03000000 // CS0n Input Ready Delay +#define EPI_HB8TIME_CAPWIDTH_M 0x00003000 // CS0n Inter-transfer Capture + // Width +#define EPI_HB8TIME_WRWSM 0x00000010 // Write Wait State Minus One +#define EPI_HB8TIME_RDWSM 0x00000001 // Read Wait State Minus One +#define EPI_HB8TIME_IRDYDLY_S 24 +#define EPI_HB8TIME_CAPWIDTH_S 12 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB16TIME register. +// +//***************************************************************************** +#define EPI_HB16TIME_IRDYDLY_M 0x03000000 // CS0n Input Ready Delay +#define EPI_HB16TIME_PSRAMSZ_M 0x00070000 // PSRAM Row Size +#define EPI_HB16TIME_PSRAMSZ_0 0x00000000 // No row size limitation +#define EPI_HB16TIME_PSRAMSZ_128B \ + 0x00010000 // 128 B +#define EPI_HB16TIME_PSRAMSZ_256B \ + 0x00020000 // 256 B +#define EPI_HB16TIME_PSRAMSZ_512B \ + 0x00030000 // 512 B +#define EPI_HB16TIME_PSRAMSZ_1KB \ + 0x00040000 // 1024 B +#define EPI_HB16TIME_PSRAMSZ_2KB \ + 0x00050000 // 2048 B +#define EPI_HB16TIME_PSRAMSZ_4KB \ + 0x00060000 // 4096 B +#define EPI_HB16TIME_PSRAMSZ_8KB \ + 0x00070000 // 8192 B +#define EPI_HB16TIME_CAPWIDTH_M 0x00003000 // CS0n Inter-transfer Capture + // Width +#define EPI_HB16TIME_WRWSM 0x00000010 // Write Wait State Minus One +#define EPI_HB16TIME_RDWSM 0x00000001 // Read Wait State Minus One +#define EPI_HB16TIME_IRDYDLY_S 24 +#define EPI_HB16TIME_CAPWIDTH_S 12 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB8TIME2 register. +// +//***************************************************************************** +#define EPI_HB8TIME2_IRDYDLY_M 0x03000000 // CS1n Input Ready Delay +#define EPI_HB8TIME2_CAPWIDTH_M 0x00003000 // CS1n Inter-transfer Capture + // Width +#define EPI_HB8TIME2_WRWSM 0x00000010 // CS1n Write Wait State Minus One +#define EPI_HB8TIME2_RDWSM 0x00000001 // CS1n Read Wait State Minus One +#define EPI_HB8TIME2_IRDYDLY_S 24 +#define EPI_HB8TIME2_CAPWIDTH_S 12 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB16TIME2 +// register. +// +//***************************************************************************** +#define EPI_HB16TIME2_IRDYDLY_M 0x03000000 // CS1n Input Ready Delay +#define EPI_HB16TIME2_PSRAMSZ_M 0x00070000 // PSRAM Row Size +#define EPI_HB16TIME2_PSRAMSZ_0 0x00000000 // No row size limitation +#define EPI_HB16TIME2_PSRAMSZ_128B \ + 0x00010000 // 128 B +#define EPI_HB16TIME2_PSRAMSZ_256B \ + 0x00020000 // 256 B +#define EPI_HB16TIME2_PSRAMSZ_512B \ + 0x00030000 // 512 B +#define EPI_HB16TIME2_PSRAMSZ_1KB \ + 0x00040000 // 1024 B +#define EPI_HB16TIME2_PSRAMSZ_2KB \ + 0x00050000 // 2048 B +#define EPI_HB16TIME2_PSRAMSZ_4KB \ + 0x00060000 // 4096 B +#define EPI_HB16TIME2_PSRAMSZ_8KB \ + 0x00070000 // 8192 B +#define EPI_HB16TIME2_CAPWIDTH_M \ + 0x00003000 // CS1n Inter-transfer Capture + // Width +#define EPI_HB16TIME2_WRWSM 0x00000010 // CS1n Write Wait State Minus One +#define EPI_HB16TIME2_RDWSM 0x00000001 // CS1n Read Wait State Minus One +#define EPI_HB16TIME2_IRDYDLY_S 24 +#define EPI_HB16TIME2_CAPWIDTH_S \ + 12 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB16TIME3 +// register. +// +//***************************************************************************** +#define EPI_HB16TIME3_IRDYDLY_M 0x03000000 // CS2n Input Ready Delay +#define EPI_HB16TIME3_PSRAMSZ_M 0x00070000 // PSRAM Row Size +#define EPI_HB16TIME3_PSRAMSZ_0 0x00000000 // No row size limitation +#define EPI_HB16TIME3_PSRAMSZ_128B \ + 0x00010000 // 128 B +#define EPI_HB16TIME3_PSRAMSZ_256B \ + 0x00020000 // 256 B +#define EPI_HB16TIME3_PSRAMSZ_512B \ + 0x00030000 // 512 B +#define EPI_HB16TIME3_PSRAMSZ_1KB \ + 0x00040000 // 1024 B +#define EPI_HB16TIME3_PSRAMSZ_2KB \ + 0x00050000 // 2048 B +#define EPI_HB16TIME3_PSRAMSZ_4KB \ + 0x00060000 // 4096 B +#define EPI_HB16TIME3_PSRAMSZ_8KB \ + 0x00070000 // 8192 B +#define EPI_HB16TIME3_CAPWIDTH_M \ + 0x00003000 // CS2n Inter-transfer Capture + // Width +#define EPI_HB16TIME3_WRWSM 0x00000010 // CS2n Write Wait State Minus One +#define EPI_HB16TIME3_RDWSM 0x00000001 // CS2n Read Wait State Minus One +#define EPI_HB16TIME3_IRDYDLY_S 24 +#define EPI_HB16TIME3_CAPWIDTH_S \ + 12 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB8TIME3 register. +// +//***************************************************************************** +#define EPI_HB8TIME3_IRDYDLY_M 0x03000000 // CS2n Input Ready Delay +#define EPI_HB8TIME3_CAPWIDTH_M 0x00003000 // CS2n Inter-transfer Capture + // Width +#define EPI_HB8TIME3_WRWSM 0x00000010 // CS2n Write Wait State Minus One +#define EPI_HB8TIME3_RDWSM 0x00000001 // CS2n Read Wait State Minus One +#define EPI_HB8TIME3_IRDYDLY_S 24 +#define EPI_HB8TIME3_CAPWIDTH_S 12 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB8TIME4 register. +// +//***************************************************************************** +#define EPI_HB8TIME4_IRDYDLY_M 0x03000000 // CS3n Input Ready Delay +#define EPI_HB8TIME4_CAPWIDTH_M 0x00003000 // CS3n Inter-transfer Capture + // Width +#define EPI_HB8TIME4_WRWSM 0x00000010 // CS3n Write Wait State Minus One +#define EPI_HB8TIME4_RDWSM 0x00000001 // CS3n Read Wait State Minus One +#define EPI_HB8TIME4_IRDYDLY_S 24 +#define EPI_HB8TIME4_CAPWIDTH_S 12 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HB16TIME4 +// register. +// +//***************************************************************************** +#define EPI_HB16TIME4_IRDYDLY_M 0x03000000 // CS3n Input Ready Delay +#define EPI_HB16TIME4_PSRAMSZ_M 0x00070000 // PSRAM Row Size +#define EPI_HB16TIME4_PSRAMSZ_0 0x00000000 // No row size limitation +#define EPI_HB16TIME4_PSRAMSZ_128B \ + 0x00010000 // 128 B +#define EPI_HB16TIME4_PSRAMSZ_256B \ + 0x00020000 // 256 B +#define EPI_HB16TIME4_PSRAMSZ_512B \ + 0x00030000 // 512 B +#define EPI_HB16TIME4_PSRAMSZ_1KB \ + 0x00040000 // 1024 B +#define EPI_HB16TIME4_PSRAMSZ_2KB \ + 0x00050000 // 2048 B +#define EPI_HB16TIME4_PSRAMSZ_4KB \ + 0x00060000 // 4096 B +#define EPI_HB16TIME4_PSRAMSZ_8KB \ + 0x00070000 // 8192 B +#define EPI_HB16TIME4_CAPWIDTH_M \ + 0x00003000 // CS3n Inter-transfer Capture + // Width +#define EPI_HB16TIME4_WRWSM 0x00000010 // CS3n Write Wait State Minus One +#define EPI_HB16TIME4_RDWSM 0x00000001 // CS3n Read Wait State Minus One +#define EPI_HB16TIME4_IRDYDLY_S 24 +#define EPI_HB16TIME4_CAPWIDTH_S \ + 12 + +//***************************************************************************** +// +// The following are defines for the bit fields in the EPI_O_HBPSRAM register. +// +//***************************************************************************** +#define EPI_HBPSRAM_CR_M 0x001FFFFF // PSRAM Config Register +#define EPI_HBPSRAM_CR_S 0 + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the EPI_O_FIFOLVL +// register. +// +//***************************************************************************** +#define EPI_FIFOLVL_WRFIFO_1_4 0x00000020 // Trigger when there are up to 3 + // spaces available in the WFIFO +#define EPI_FIFOLVL_WRFIFO_1_2 0x00000030 // Trigger when there are up to 2 + // spaces available in the WFIFO +#define EPI_FIFOLVL_WRFIFO_3_4 0x00000040 // Trigger when there is 1 space + // available in the WFIFO +#define EPI_FIFOLVL_RDFIFO_1_8 0x00000001 // Trigger when there are 1 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_1_4 0x00000002 // Trigger when there are 2 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_1_2 0x00000003 // Trigger when there are 4 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_3_4 0x00000004 // Trigger when there are 6 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_7_8 0x00000005 // Trigger when there are 7 or more + // entries in the NBRFIFO +#define EPI_FIFOLVL_RDFIFO_FULL 0x00000006 // Trigger when there are 8 entries + // in the NBRFIFO + +#endif + +#endif // __HW_EPI_H__ diff --git a/os/common/ext/TivaWare/inc/hw_fan.h b/os/common/ext/TivaWare/inc/hw_fan.h new file mode 100644 index 0000000..089a8ea --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_fan.h @@ -0,0 +1,49 @@ +//***************************************************************************** +// +// hw_fan.h - Macros used when accessing the fan control hardware. +// +// Copyright (c) 2010-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_FAN_H__ +#define __HW_FAN_H__ + +//***************************************************************************** +// +// The following are defines for the Fan Control register offsets. +// +//***************************************************************************** + +#endif // __HW_FAN_H__ diff --git a/os/common/ext/TivaWare/inc/hw_flash.h b/os/common/ext/TivaWare/inc/hw_flash.h new file mode 100644 index 0000000..0133b35 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_flash.h @@ -0,0 +1,625 @@ +//***************************************************************************** +// +// hw_flash.h - Macros used when accessing the flash controller. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_FLASH_H__ +#define __HW_FLASH_H__ + +//***************************************************************************** +// +// The following are defines for the FLASH register offsets. +// +//***************************************************************************** +#define FLASH_FMA 0x400FD000 // Flash Memory Address +#define FLASH_FMD 0x400FD004 // Flash Memory Data +#define FLASH_FMC 0x400FD008 // Flash Memory Control +#define FLASH_FCRIS 0x400FD00C // Flash Controller Raw Interrupt + // Status +#define FLASH_FCIM 0x400FD010 // Flash Controller Interrupt Mask +#define FLASH_FCMISC 0x400FD014 // Flash Controller Masked + // Interrupt Status and Clear +#define FLASH_FMC2 0x400FD020 // Flash Memory Control 2 +#define FLASH_FWBVAL 0x400FD030 // Flash Write Buffer Valid +#define FLASH_FLPEKEY 0x400FD03C // Flash Program/Erase Key +#define FLASH_FWBN 0x400FD100 // Flash Write Buffer n +#define FLASH_PP 0x400FDFC0 // Flash Peripheral Properties +#define FLASH_FSIZE 0x400FDFC0 // Flash Size +#define FLASH_SSIZE 0x400FDFC4 // SRAM Size +#define FLASH_CONF 0x400FDFC8 // Flash Configuration Register +#define FLASH_ROMSWMAP 0x400FDFCC // ROM Software Map +#define FLASH_DMASZ 0x400FDFD0 // Flash DMA Address Size +#define FLASH_DMAST 0x400FDFD4 // Flash DMA Starting Address +#define FLASH_RVP 0x400FE0D4 // Reset Vector Pointer +#define FLASH_RMCTL 0x400FE0F0 // ROM Control +#define FLASH_BOOTCFG 0x400FE1D0 // Boot Configuration +#define FLASH_USERREG0 0x400FE1E0 // User Register 0 +#define FLASH_USERREG1 0x400FE1E4 // User Register 1 +#define FLASH_USERREG2 0x400FE1E8 // User Register 2 +#define FLASH_USERREG3 0x400FE1EC // User Register 3 +#define FLASH_FMPRE0 0x400FE200 // Flash Memory Protection Read + // Enable 0 +#define FLASH_FMPRE1 0x400FE204 // Flash Memory Protection Read + // Enable 1 +#define FLASH_FMPRE2 0x400FE208 // Flash Memory Protection Read + // Enable 2 +#define FLASH_FMPRE3 0x400FE20C // Flash Memory Protection Read + // Enable 3 +#define FLASH_FMPRE4 0x400FE210 // Flash Memory Protection Read + // Enable 4 +#define FLASH_FMPRE5 0x400FE214 // Flash Memory Protection Read + // Enable 5 +#define FLASH_FMPRE6 0x400FE218 // Flash Memory Protection Read + // Enable 6 +#define FLASH_FMPRE7 0x400FE21C // Flash Memory Protection Read + // Enable 7 +#define FLASH_FMPRE8 0x400FE220 // Flash Memory Protection Read + // Enable 8 +#define FLASH_FMPRE9 0x400FE224 // Flash Memory Protection Read + // Enable 9 +#define FLASH_FMPRE10 0x400FE228 // Flash Memory Protection Read + // Enable 10 +#define FLASH_FMPRE11 0x400FE22C // Flash Memory Protection Read + // Enable 11 +#define FLASH_FMPRE12 0x400FE230 // Flash Memory Protection Read + // Enable 12 +#define FLASH_FMPRE13 0x400FE234 // Flash Memory Protection Read + // Enable 13 +#define FLASH_FMPRE14 0x400FE238 // Flash Memory Protection Read + // Enable 14 +#define FLASH_FMPRE15 0x400FE23C // Flash Memory Protection Read + // Enable 15 +#define FLASH_FMPPE0 0x400FE400 // Flash Memory Protection Program + // Enable 0 +#define FLASH_FMPPE1 0x400FE404 // Flash Memory Protection Program + // Enable 1 +#define FLASH_FMPPE2 0x400FE408 // Flash Memory Protection Program + // Enable 2 +#define FLASH_FMPPE3 0x400FE40C // Flash Memory Protection Program + // Enable 3 +#define FLASH_FMPPE4 0x400FE410 // Flash Memory Protection Program + // Enable 4 +#define FLASH_FMPPE5 0x400FE414 // Flash Memory Protection Program + // Enable 5 +#define FLASH_FMPPE6 0x400FE418 // Flash Memory Protection Program + // Enable 6 +#define FLASH_FMPPE7 0x400FE41C // Flash Memory Protection Program + // Enable 7 +#define FLASH_FMPPE8 0x400FE420 // Flash Memory Protection Program + // Enable 8 +#define FLASH_FMPPE9 0x400FE424 // Flash Memory Protection Program + // Enable 9 +#define FLASH_FMPPE10 0x400FE428 // Flash Memory Protection Program + // Enable 10 +#define FLASH_FMPPE11 0x400FE42C // Flash Memory Protection Program + // Enable 11 +#define FLASH_FMPPE12 0x400FE430 // Flash Memory Protection Program + // Enable 12 +#define FLASH_FMPPE13 0x400FE434 // Flash Memory Protection Program + // Enable 13 +#define FLASH_FMPPE14 0x400FE438 // Flash Memory Protection Program + // Enable 14 +#define FLASH_FMPPE15 0x400FE43C // Flash Memory Protection Program + // Enable 15 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMA register. +// +//***************************************************************************** +#define FLASH_FMA_OFFSET_M 0x000FFFFF // Address Offset +#define FLASH_FMA_OFFSET_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMD register. +// +//***************************************************************************** +#define FLASH_FMD_DATA_M 0xFFFFFFFF // Data Value +#define FLASH_FMD_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMC register. +// +//***************************************************************************** +#define FLASH_FMC_WRKEY 0xA4420000 // FLASH write key +#define FLASH_FMC_COMT 0x00000008 // Commit Register Value +#define FLASH_FMC_MERASE 0x00000004 // Mass Erase Flash Memory +#define FLASH_FMC_ERASE 0x00000002 // Erase a Page of Flash Memory +#define FLASH_FMC_WRITE 0x00000001 // Write a Word into Flash Memory + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FCRIS register. +// +//***************************************************************************** +#define FLASH_FCRIS_PROGRIS 0x00002000 // Program Verify Error Raw + // Interrupt Status +#define FLASH_FCRIS_ERRIS 0x00000800 // Erase Verify Error Raw Interrupt + // Status +#define FLASH_FCRIS_INVDRIS 0x00000400 // Invalid Data Raw Interrupt + // Status +#define FLASH_FCRIS_VOLTRIS 0x00000200 // Pump Voltage Raw Interrupt + // Status +#define FLASH_FCRIS_ERIS 0x00000004 // EEPROM Raw Interrupt Status +#define FLASH_FCRIS_PRIS 0x00000002 // Programming Raw Interrupt Status +#define FLASH_FCRIS_ARIS 0x00000001 // Access Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FCIM register. +// +//***************************************************************************** +#define FLASH_FCIM_PROGMASK 0x00002000 // PROGVER Interrupt Mask +#define FLASH_FCIM_ERMASK 0x00000800 // ERVER Interrupt Mask +#define FLASH_FCIM_INVDMASK 0x00000400 // Invalid Data Interrupt Mask +#define FLASH_FCIM_VOLTMASK 0x00000200 // VOLT Interrupt Mask +#define FLASH_FCIM_EMASK 0x00000004 // EEPROM Interrupt Mask +#define FLASH_FCIM_PMASK 0x00000002 // Programming Interrupt Mask +#define FLASH_FCIM_AMASK 0x00000001 // Access Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FCMISC register. +// +//***************************************************************************** +#define FLASH_FCMISC_PROGMISC 0x00002000 // PROGVER Masked Interrupt Status + // and Clear +#define FLASH_FCMISC_ERMISC 0x00000800 // ERVER Masked Interrupt Status + // and Clear +#define FLASH_FCMISC_INVDMISC 0x00000400 // Invalid Data Masked Interrupt + // Status and Clear +#define FLASH_FCMISC_VOLTMISC 0x00000200 // VOLT Masked Interrupt Status and + // Clear +#define FLASH_FCMISC_EMISC 0x00000004 // EEPROM Masked Interrupt Status + // and Clear +#define FLASH_FCMISC_PMISC 0x00000002 // Programming Masked Interrupt + // Status and Clear +#define FLASH_FCMISC_AMISC 0x00000001 // Access Masked Interrupt Status + // and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMC2 register. +// +//***************************************************************************** +#define FLASH_FMC2_WRKEY 0xA4420000 // FLASH write key +#define FLASH_FMC2_WRBUF 0x00000001 // Buffered Flash Memory Write + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FWBVAL register. +// +//***************************************************************************** +#define FLASH_FWBVAL_FWB_M 0xFFFFFFFF // Flash Memory Write Buffer + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FLPEKEY register. +// +//***************************************************************************** +#define FLASH_FLPEKEY_PEKEY_M 0x0000FFFF // Key Value +#define FLASH_FLPEKEY_PEKEY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FWBN register. +// +//***************************************************************************** +#define FLASH_FWBN_DATA_M 0xFFFFFFFF // Data + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_PP register. +// +//***************************************************************************** +#define FLASH_PP_PFC 0x40000000 // Prefetch Buffer Mode +#define FLASH_PP_FMM 0x20000000 // Flash Mirror Mode +#define FLASH_PP_DFA 0x10000000 // DMA Flash Access +#define FLASH_PP_EESS_M 0x00780000 // EEPROM Sector Size of the + // physical bank +#define FLASH_PP_EESS_1KB 0x00000000 // 1 KB +#define FLASH_PP_EESS_2KB 0x00080000 // 2 KB +#define FLASH_PP_EESS_4KB 0x00100000 // 4 KB +#define FLASH_PP_EESS_8KB 0x00180000 // 8 KB +#define FLASH_PP_MAINSS_M 0x00070000 // Flash Sector Size of the + // physical bank +#define FLASH_PP_MAINSS_1KB 0x00000000 // 1 KB +#define FLASH_PP_MAINSS_2KB 0x00010000 // 2 KB +#define FLASH_PP_MAINSS_4KB 0x00020000 // 4 KB +#define FLASH_PP_MAINSS_8KB 0x00030000 // 8 KB +#define FLASH_PP_MAINSS_16KB 0x00040000 // 16 KB +#define FLASH_PP_SIZE_M 0x0000FFFF // Flash Size +#define FLASH_PP_SIZE_512KB 0x000000FF // 512 KB of Flash +#define FLASH_PP_SIZE_1MB 0x000001FF // 1024 KB of Flash + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FSIZE register. +// +//***************************************************************************** +#define FLASH_FSIZE_SIZE_M 0x0000FFFF // Flash Size +#define FLASH_FSIZE_SIZE_32KB 0x0000000F // 32 KB of Flash +#define FLASH_FSIZE_SIZE_64KB 0x0000001F // 64 KB of Flash +#define FLASH_FSIZE_SIZE_128KB 0x0000003F // 128 KB of Flash +#define FLASH_FSIZE_SIZE_256KB 0x0000007F // 256 KB of Flash + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_SSIZE register. +// +//***************************************************************************** +#define FLASH_SSIZE_SIZE_M 0x0000FFFF // SRAM Size +#define FLASH_SSIZE_SIZE_12KB 0x0000002F // 12 KB of SRAM +#define FLASH_SSIZE_SIZE_24KB 0x0000005F // 24 KB of SRAM +#define FLASH_SSIZE_SIZE_32KB 0x0000007F // 32 KB of SRAM +#define FLASH_SSIZE_SIZE_256KB 0x000003FF // 256 KB of SRAM + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_CONF register. +// +//***************************************************************************** +#define FLASH_CONF_FMME 0x40000000 // Flash Mirror Mode Enable +#define FLASH_CONF_SPFE 0x20000000 // Single Prefetch Mode Enable +#define FLASH_CONF_CLRTV 0x00100000 // Clear Valid Tags +#define FLASH_CONF_FPFON 0x00020000 // Force Prefetch On +#define FLASH_CONF_FPFOFF 0x00010000 // Force Prefetch Off + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_ROMSWMAP register. +// +//***************************************************************************** +#define FLASH_ROMSWMAP_SAFERTOS 0x00000001 // SafeRTOS Present +#define FLASH_ROMSWMAP_SW0EN_M 0x00000003 // ROM SW Region 0 Availability +#define FLASH_ROMSWMAP_SW0EN_NOTVIS \ + 0x00000000 // Software region not available to + // the core +#define FLASH_ROMSWMAP_SW0EN_CORE \ + 0x00000001 // Region available to core +#define FLASH_ROMSWMAP_SW1EN_M 0x0000000C // ROM SW Region 1 Availability +#define FLASH_ROMSWMAP_SW1EN_NOTVIS \ + 0x00000000 // Software region not available to + // the core +#define FLASH_ROMSWMAP_SW1EN_CORE \ + 0x00000004 // Region available to core +#define FLASH_ROMSWMAP_SW2EN_M 0x00000030 // ROM SW Region 2 Availability +#define FLASH_ROMSWMAP_SW2EN_NOTVIS \ + 0x00000000 // Software region not available to + // the core +#define FLASH_ROMSWMAP_SW2EN_CORE \ + 0x00000010 // Region available to core +#define FLASH_ROMSWMAP_SW3EN_M 0x000000C0 // ROM SW Region 3 Availability +#define FLASH_ROMSWMAP_SW3EN_NOTVIS \ + 0x00000000 // Software region not available to + // the core +#define FLASH_ROMSWMAP_SW3EN_CORE \ + 0x00000040 // Region available to core +#define FLASH_ROMSWMAP_SW4EN_M 0x00000300 // ROM SW Region 4 Availability +#define FLASH_ROMSWMAP_SW4EN_NOTVIS \ + 0x00000000 // Software region not available to + // the core +#define FLASH_ROMSWMAP_SW4EN_CORE \ + 0x00000100 // Region available to core +#define FLASH_ROMSWMAP_SW5EN_M 0x00000C00 // ROM SW Region 5 Availability +#define FLASH_ROMSWMAP_SW5EN_NOTVIS \ + 0x00000000 // Software region not available to + // the core +#define FLASH_ROMSWMAP_SW5EN_CORE \ + 0x00000400 // Region available to core +#define FLASH_ROMSWMAP_SW6EN_M 0x00003000 // ROM SW Region 6 Availability +#define FLASH_ROMSWMAP_SW6EN_NOTVIS \ + 0x00000000 // Software region not available to + // the core +#define FLASH_ROMSWMAP_SW6EN_CORE \ + 0x00001000 // Region available to core +#define FLASH_ROMSWMAP_SW7EN_M 0x0000C000 // ROM SW Region 7 Availability +#define FLASH_ROMSWMAP_SW7EN_NOTVIS \ + 0x00000000 // Software region not available to + // the core +#define FLASH_ROMSWMAP_SW7EN_CORE \ + 0x00004000 // Region available to core + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_DMASZ register. +// +//***************************************************************************** +#define FLASH_DMASZ_SIZE_M 0x0003FFFF // uDMA-accessible Memory Size +#define FLASH_DMASZ_SIZE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_DMAST register. +// +//***************************************************************************** +#define FLASH_DMAST_ADDR_M 0x1FFFF800 // Contains the starting address of + // the flash region accessible by + // uDMA if the FLASHPP register DFA + // bit is set +#define FLASH_DMAST_ADDR_S 11 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_RVP register. +// +//***************************************************************************** +#define FLASH_RVP_RV_M 0xFFFFFFFF // Reset Vector Pointer Address +#define FLASH_RVP_RV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_RMCTL register. +// +//***************************************************************************** +#define FLASH_RMCTL_BA 0x00000001 // Boot Alias + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_BOOTCFG register. +// +//***************************************************************************** +#define FLASH_BOOTCFG_NW 0x80000000 // Not Written +#define FLASH_BOOTCFG_PORT_M 0x0000E000 // Boot GPIO Port +#define FLASH_BOOTCFG_PORT_A 0x00000000 // Port A +#define FLASH_BOOTCFG_PORT_B 0x00002000 // Port B +#define FLASH_BOOTCFG_PORT_C 0x00004000 // Port C +#define FLASH_BOOTCFG_PORT_D 0x00006000 // Port D +#define FLASH_BOOTCFG_PORT_E 0x00008000 // Port E +#define FLASH_BOOTCFG_PORT_F 0x0000A000 // Port F +#define FLASH_BOOTCFG_PORT_G 0x0000C000 // Port G +#define FLASH_BOOTCFG_PORT_H 0x0000E000 // Port H +#define FLASH_BOOTCFG_PIN_M 0x00001C00 // Boot GPIO Pin +#define FLASH_BOOTCFG_PIN_0 0x00000000 // Pin 0 +#define FLASH_BOOTCFG_PIN_1 0x00000400 // Pin 1 +#define FLASH_BOOTCFG_PIN_2 0x00000800 // Pin 2 +#define FLASH_BOOTCFG_PIN_3 0x00000C00 // Pin 3 +#define FLASH_BOOTCFG_PIN_4 0x00001000 // Pin 4 +#define FLASH_BOOTCFG_PIN_5 0x00001400 // Pin 5 +#define FLASH_BOOTCFG_PIN_6 0x00001800 // Pin 6 +#define FLASH_BOOTCFG_PIN_7 0x00001C00 // Pin 7 +#define FLASH_BOOTCFG_POL 0x00000200 // Boot GPIO Polarity +#define FLASH_BOOTCFG_EN 0x00000100 // Boot GPIO Enable +#define FLASH_BOOTCFG_KEY 0x00000010 // KEY Select +#define FLASH_BOOTCFG_DBG1 0x00000002 // Debug Control 1 +#define FLASH_BOOTCFG_DBG0 0x00000001 // Debug Control 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG0 register. +// +//***************************************************************************** +#define FLASH_USERREG0_DATA_M 0xFFFFFFFF // User Data +#define FLASH_USERREG0_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG1 register. +// +//***************************************************************************** +#define FLASH_USERREG1_DATA_M 0xFFFFFFFF // User Data +#define FLASH_USERREG1_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG2 register. +// +//***************************************************************************** +#define FLASH_USERREG2_DATA_M 0xFFFFFFFF // User Data +#define FLASH_USERREG2_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_USERREG3 register. +// +//***************************************************************************** +#define FLASH_USERREG3_DATA_M 0xFFFFFFFF // User Data +#define FLASH_USERREG3_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPRE8 register. +// +//***************************************************************************** +#define FLASH_FMPRE8_READ_ENABLE_M \ + 0xFFFFFFFF // Flash Read Enable +#define FLASH_FMPRE8_READ_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPRE9 register. +// +//***************************************************************************** +#define FLASH_FMPRE9_READ_ENABLE_M \ + 0xFFFFFFFF // Flash Read Enable +#define FLASH_FMPRE9_READ_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPRE10 register. +// +//***************************************************************************** +#define FLASH_FMPRE10_READ_ENABLE_M \ + 0xFFFFFFFF // Flash Read Enable +#define FLASH_FMPRE10_READ_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPRE11 register. +// +//***************************************************************************** +#define FLASH_FMPRE11_READ_ENABLE_M \ + 0xFFFFFFFF // Flash Read Enable +#define FLASH_FMPRE11_READ_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPRE12 register. +// +//***************************************************************************** +#define FLASH_FMPRE12_READ_ENABLE_M \ + 0xFFFFFFFF // Flash Read Enable +#define FLASH_FMPRE12_READ_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPRE13 register. +// +//***************************************************************************** +#define FLASH_FMPRE13_READ_ENABLE_M \ + 0xFFFFFFFF // Flash Read Enable +#define FLASH_FMPRE13_READ_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPRE14 register. +// +//***************************************************************************** +#define FLASH_FMPRE14_READ_ENABLE_M \ + 0xFFFFFFFF // Flash Read Enable +#define FLASH_FMPRE14_READ_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPRE15 register. +// +//***************************************************************************** +#define FLASH_FMPRE15_READ_ENABLE_M \ + 0xFFFFFFFF // Flash Read Enable +#define FLASH_FMPRE15_READ_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPPE8 register. +// +//***************************************************************************** +#define FLASH_FMPPE8_PROG_ENABLE_M \ + 0xFFFFFFFF // Flash Programming Enable +#define FLASH_FMPPE8_PROG_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPPE9 register. +// +//***************************************************************************** +#define FLASH_FMPPE9_PROG_ENABLE_M \ + 0xFFFFFFFF // Flash Programming Enable +#define FLASH_FMPPE9_PROG_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPPE10 register. +// +//***************************************************************************** +#define FLASH_FMPPE10_PROG_ENABLE_M \ + 0xFFFFFFFF // Flash Programming Enable +#define FLASH_FMPPE10_PROG_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPPE11 register. +// +//***************************************************************************** +#define FLASH_FMPPE11_PROG_ENABLE_M \ + 0xFFFFFFFF // Flash Programming Enable +#define FLASH_FMPPE11_PROG_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPPE12 register. +// +//***************************************************************************** +#define FLASH_FMPPE12_PROG_ENABLE_M \ + 0xFFFFFFFF // Flash Programming Enable +#define FLASH_FMPPE12_PROG_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPPE13 register. +// +//***************************************************************************** +#define FLASH_FMPPE13_PROG_ENABLE_M \ + 0xFFFFFFFF // Flash Programming Enable +#define FLASH_FMPPE13_PROG_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPPE14 register. +// +//***************************************************************************** +#define FLASH_FMPPE14_PROG_ENABLE_M \ + 0xFFFFFFFF // Flash Programming Enable +#define FLASH_FMPPE14_PROG_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the FLASH_FMPPE15 register. +// +//***************************************************************************** +#define FLASH_FMPPE15_PROG_ENABLE_M \ + 0xFFFFFFFF // Flash Programming Enable +#define FLASH_FMPPE15_PROG_ENABLE_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the erase size of the FLASH block that is +// erased by an erase operation, and the protect size is the size of the FLASH +// block that is protected by each protection register. +// +//***************************************************************************** +#define FLASH_PROTECT_SIZE 0x00000800 +#define FLASH_ERASE_SIZE 0x00000400 + +#endif // __HW_FLASH_H__ diff --git a/os/common/ext/TivaWare/inc/hw_gpio.h b/os/common/ext/TivaWare/inc/hw_gpio.h new file mode 100644 index 0000000..a2ef2e7 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_gpio.h @@ -0,0 +1,213 @@ +//***************************************************************************** +// +// hw_gpio.h - Defines and Macros for GPIO hardware. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_GPIO_H__ +#define __HW_GPIO_H__ + +//***************************************************************************** +// +// The following are defines for the GPIO register offsets. +// +//***************************************************************************** +#define GPIO_O_DATA 0x00000000 // GPIO Data +#define GPIO_O_DIR 0x00000400 // GPIO Direction +#define GPIO_O_IS 0x00000404 // GPIO Interrupt Sense +#define GPIO_O_IBE 0x00000408 // GPIO Interrupt Both Edges +#define GPIO_O_IEV 0x0000040C // GPIO Interrupt Event +#define GPIO_O_IM 0x00000410 // GPIO Interrupt Mask +#define GPIO_O_RIS 0x00000414 // GPIO Raw Interrupt Status +#define GPIO_O_MIS 0x00000418 // GPIO Masked Interrupt Status +#define GPIO_O_ICR 0x0000041C // GPIO Interrupt Clear +#define GPIO_O_AFSEL 0x00000420 // GPIO Alternate Function Select +#define GPIO_O_DR2R 0x00000500 // GPIO 2-mA Drive Select +#define GPIO_O_DR4R 0x00000504 // GPIO 4-mA Drive Select +#define GPIO_O_DR8R 0x00000508 // GPIO 8-mA Drive Select +#define GPIO_O_ODR 0x0000050C // GPIO Open Drain Select +#define GPIO_O_PUR 0x00000510 // GPIO Pull-Up Select +#define GPIO_O_PDR 0x00000514 // GPIO Pull-Down Select +#define GPIO_O_SLR 0x00000518 // GPIO Slew Rate Control Select +#define GPIO_O_DEN 0x0000051C // GPIO Digital Enable +#define GPIO_O_LOCK 0x00000520 // GPIO Lock +#define GPIO_O_CR 0x00000524 // GPIO Commit +#define GPIO_O_AMSEL 0x00000528 // GPIO Analog Mode Select +#define GPIO_O_PCTL 0x0000052C // GPIO Port Control +#define GPIO_O_ADCCTL 0x00000530 // GPIO ADC Control +#define GPIO_O_DMACTL 0x00000534 // GPIO DMA Control +#define GPIO_O_SI 0x00000538 // GPIO Select Interrupt +#define GPIO_O_DR12R 0x0000053C // GPIO 12-mA Drive Select +#define GPIO_O_WAKEPEN 0x00000540 // GPIO Wake Pin Enable +#define GPIO_O_WAKELVL 0x00000544 // GPIO Wake Level +#define GPIO_O_WAKESTAT 0x00000548 // GPIO Wake Status +#define GPIO_O_PP 0x00000FC0 // GPIO Peripheral Property +#define GPIO_O_PC 0x00000FC4 // GPIO Peripheral Configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_IM register. +// +//***************************************************************************** +#define GPIO_IM_DMAIME 0x00000100 // GPIO uDMA Done Interrupt Mask + // Enable +#define GPIO_IM_GPIO_M 0x000000FF // GPIO Interrupt Mask Enable +#define GPIO_IM_GPIO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_RIS register. +// +//***************************************************************************** +#define GPIO_RIS_DMARIS 0x00000100 // GPIO uDMA Done Interrupt Raw + // Status +#define GPIO_RIS_GPIO_M 0x000000FF // GPIO Interrupt Raw Status +#define GPIO_RIS_GPIO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_MIS register. +// +//***************************************************************************** +#define GPIO_MIS_DMAMIS 0x00000100 // GPIO uDMA Done Masked Interrupt + // Status +#define GPIO_MIS_GPIO_M 0x000000FF // GPIO Masked Interrupt Status +#define GPIO_MIS_GPIO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_ICR register. +// +//***************************************************************************** +#define GPIO_ICR_DMAIC 0x00000100 // GPIO uDMA Interrupt Clear +#define GPIO_ICR_GPIO_M 0x000000FF // GPIO Interrupt Clear +#define GPIO_ICR_GPIO_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_LOCK register. +// +//***************************************************************************** +#define GPIO_LOCK_M 0xFFFFFFFF // GPIO Lock +#define GPIO_LOCK_UNLOCKED 0x00000000 // The GPIOCR register is unlocked + // and may be modified +#define GPIO_LOCK_LOCKED 0x00000001 // The GPIOCR register is locked + // and may not be modified +#define GPIO_LOCK_KEY 0x4C4F434B // Unlocks the GPIO_CR register + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_SI register. +// +//***************************************************************************** +#define GPIO_SI_SUM 0x00000001 // Summary Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_DR12R register. +// +//***************************************************************************** +#define GPIO_DR12R_DRV12_M 0x000000FF // Output Pad 12-mA Drive Enable +#define GPIO_DR12R_DRV12_12MA 0x00000001 // The corresponding GPIO pin has + // 12-mA drive. This encoding is + // only valid if the GPIOPP EDE bit + // is set and the appropriate + // GPIOPC EDM bit field is + // programmed to 0x3 + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_WAKEPEN register. +// +//***************************************************************************** +#define GPIO_WAKEPEN_WAKEP4 0x00000010 // P[4] Wake Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_WAKELVL register. +// +//***************************************************************************** +#define GPIO_WAKELVL_WAKELVL4 0x00000010 // P[4] Wake Level + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_WAKESTAT +// register. +// +//***************************************************************************** +#define GPIO_WAKESTAT_STAT4 0x00000010 // P[4] Wake Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_PP register. +// +//***************************************************************************** +#define GPIO_PP_EDE 0x00000001 // Extended Drive Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the GPIO_O_PC register. +// +//***************************************************************************** +#define GPIO_PC_EDM7_M 0x0000C000 // Extended Drive Mode Bit 7 +#define GPIO_PC_EDM6_M 0x00003000 // Extended Drive Mode Bit 6 +#define GPIO_PC_EDM5_M 0x00000C00 // Extended Drive Mode Bit 5 +#define GPIO_PC_EDM4_M 0x00000300 // Extended Drive Mode Bit 4 +#define GPIO_PC_EDM3_M 0x000000C0 // Extended Drive Mode Bit 3 +#define GPIO_PC_EDM2_M 0x00000030 // Extended Drive Mode Bit 2 +#define GPIO_PC_EDM1_M 0x0000000C // Extended Drive Mode Bit 1 +#define GPIO_PC_EDM0_M 0x00000003 // Extended Drive Mode Bit 0 +#define GPIO_PC_EDM0_DISABLE 0x00000000 // Drive values of 2, 4 and 8 mA + // are maintained. GPIO n Drive + // Select (GPIODRnR) registers + // function as normal +#define GPIO_PC_EDM0_6MA 0x00000001 // An additional 6 mA option is + // provided +#define GPIO_PC_EDM0_PLUS2MA 0x00000003 // A 2 mA driver is always enabled; + // setting the corresponding + // GPIODR4R register bit adds 2 mA + // and setting the corresponding + // GPIODR8R of GPIODR12R register + // bit adds an additional 4 mA +#define GPIO_PC_EDM7_S 14 +#define GPIO_PC_EDM6_S 12 +#define GPIO_PC_EDM5_S 10 +#define GPIO_PC_EDM4_S 8 +#define GPIO_PC_EDM3_S 6 +#define GPIO_PC_EDM2_S 4 +#define GPIO_PC_EDM1_S 2 + +#endif // __HW_GPIO_H__ diff --git a/os/common/ext/TivaWare/inc/hw_hibernate.h b/os/common/ext/TivaWare/inc/hw_hibernate.h new file mode 100644 index 0000000..6c9b4be --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_hibernate.h @@ -0,0 +1,483 @@ +//***************************************************************************** +// +// hw_hibernate.h - Defines and Macros for the Hibernation module. +// +// Copyright (c) 2007-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_HIBERNATE_H__ +#define __HW_HIBERNATE_H__ + +//***************************************************************************** +// +// The following are defines for the Hibernation module register addresses. +// +//***************************************************************************** +#define HIB_RTCC 0x400FC000 // Hibernation RTC Counter +#define HIB_RTCM0 0x400FC004 // Hibernation RTC Match 0 +#define HIB_RTCLD 0x400FC00C // Hibernation RTC Load +#define HIB_CTL 0x400FC010 // Hibernation Control +#define HIB_IM 0x400FC014 // Hibernation Interrupt Mask +#define HIB_RIS 0x400FC018 // Hibernation Raw Interrupt Status +#define HIB_MIS 0x400FC01C // Hibernation Masked Interrupt + // Status +#define HIB_IC 0x400FC020 // Hibernation Interrupt Clear +#define HIB_RTCT 0x400FC024 // Hibernation RTC Trim +#define HIB_RTCSS 0x400FC028 // Hibernation RTC Sub Seconds +#define HIB_IO 0x400FC02C // Hibernation IO Configuration +#define HIB_DATA 0x400FC030 // Hibernation Data +#define HIB_CALCTL 0x400FC300 // Hibernation Calendar Control +#define HIB_CAL0 0x400FC310 // Hibernation Calendar 0 +#define HIB_CAL1 0x400FC314 // Hibernation Calendar 1 +#define HIB_CALLD0 0x400FC320 // Hibernation Calendar Load 0 +#define HIB_CALLD1 0x400FC324 // Hibernation Calendar Load +#define HIB_CALM0 0x400FC330 // Hibernation Calendar Match 0 +#define HIB_CALM1 0x400FC334 // Hibernation Calendar Match 1 +#define HIB_LOCK 0x400FC360 // Hibernation Lock +#define HIB_TPCTL 0x400FC400 // HIB Tamper Control +#define HIB_TPSTAT 0x400FC404 // HIB Tamper Status +#define HIB_TPIO 0x400FC410 // HIB Tamper I/O Control +#define HIB_TPLOG0 0x400FC4E0 // HIB Tamper Log 0 +#define HIB_TPLOG1 0x400FC4E4 // HIB Tamper Log 1 +#define HIB_TPLOG2 0x400FC4E8 // HIB Tamper Log 2 +#define HIB_TPLOG3 0x400FC4EC // HIB Tamper Log 3 +#define HIB_TPLOG4 0x400FC4F0 // HIB Tamper Log 4 +#define HIB_TPLOG5 0x400FC4F4 // HIB Tamper Log 5 +#define HIB_TPLOG6 0x400FC4F8 // HIB Tamper Log 6 +#define HIB_TPLOG7 0x400FC4FC // HIB Tamper Log 7 +#define HIB_PP 0x400FCFC0 // Hibernation Peripheral + // Properties +#define HIB_CC 0x400FCFC8 // Hibernation Clock Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCC register. +// +//***************************************************************************** +#define HIB_RTCC_M 0xFFFFFFFF // RTC Counter +#define HIB_RTCC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCM0 register. +// +//***************************************************************************** +#define HIB_RTCM0_M 0xFFFFFFFF // RTC Match 0 +#define HIB_RTCM0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCLD register. +// +//***************************************************************************** +#define HIB_RTCLD_M 0xFFFFFFFF // RTC Load +#define HIB_RTCLD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_CTL register. +// +//***************************************************************************** +#define HIB_CTL_WRC 0x80000000 // Write Complete/Capable +#define HIB_CTL_RETCLR 0x40000000 // GPIO Retention/Clear +#define HIB_CTL_OSCSEL 0x00080000 // Oscillator Select +#define HIB_CTL_OSCDRV 0x00020000 // Oscillator Drive Capability +#define HIB_CTL_OSCBYP 0x00010000 // Oscillator Bypass +#define HIB_CTL_VBATSEL_M 0x00006000 // Select for Low-Battery + // Comparator +#define HIB_CTL_VBATSEL_1_9V 0x00000000 // 1.9 Volts +#define HIB_CTL_VBATSEL_2_1V 0x00002000 // 2.1 Volts (default) +#define HIB_CTL_VBATSEL_2_3V 0x00004000 // 2.3 Volts +#define HIB_CTL_VBATSEL_2_5V 0x00006000 // 2.5 Volts +#define HIB_CTL_BATCHK 0x00000400 // Check Battery Status +#define HIB_CTL_BATWKEN 0x00000200 // Wake on Low Battery +#define HIB_CTL_VDD3ON 0x00000100 // VDD Powered +#define HIB_CTL_VABORT 0x00000080 // Power Cut Abort Enable +#define HIB_CTL_CLK32EN 0x00000040 // Clocking Enable +#define HIB_CTL_PINWEN 0x00000010 // External Wake Pin Enable +#define HIB_CTL_RTCWEN 0x00000008 // RTC Wake-up Enable +#define HIB_CTL_HIBREQ 0x00000002 // Hibernation Request +#define HIB_CTL_RTCEN 0x00000001 // RTC Timer Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_IM register. +// +//***************************************************************************** +#define HIB_IM_VDDFAIL 0x00000080 // VDD Fail Interrupt Mask +#define HIB_IM_RSTWK 0x00000040 // Reset Pad I/O Wake-Up Interrupt + // Mask +#define HIB_IM_PADIOWK 0x00000020 // Pad I/O Wake-Up Interrupt Mask +#define HIB_IM_WC 0x00000010 // External Write Complete/Capable + // Interrupt Mask +#define HIB_IM_EXTW 0x00000008 // External Wake-Up Interrupt Mask +#define HIB_IM_LOWBAT 0x00000004 // Low Battery Voltage Interrupt + // Mask +#define HIB_IM_RTCALT0 0x00000001 // RTC Alert 0 Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RIS register. +// +//***************************************************************************** +#define HIB_RIS_VDDFAIL 0x00000080 // VDD Fail Raw Interrupt Status +#define HIB_RIS_RSTWK 0x00000040 // Reset Pad I/O Wake-Up Raw + // Interrupt Status +#define HIB_RIS_PADIOWK 0x00000020 // Pad I/O Wake-Up Raw Interrupt + // Status +#define HIB_RIS_WC 0x00000010 // Write Complete/Capable Raw + // Interrupt Status +#define HIB_RIS_EXTW 0x00000008 // External Wake-Up Raw Interrupt + // Status +#define HIB_RIS_LOWBAT 0x00000004 // Low Battery Voltage Raw + // Interrupt Status +#define HIB_RIS_RTCALT0 0x00000001 // RTC Alert 0 Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_MIS register. +// +//***************************************************************************** +#define HIB_MIS_VDDFAIL 0x00000080 // VDD Fail Interrupt Mask +#define HIB_MIS_RSTWK 0x00000040 // Reset Pad I/O Wake-Up Interrupt + // Mask +#define HIB_MIS_PADIOWK 0x00000020 // Pad I/O Wake-Up Interrupt Mask +#define HIB_MIS_WC 0x00000010 // Write Complete/Capable Masked + // Interrupt Status +#define HIB_MIS_EXTW 0x00000008 // External Wake-Up Masked + // Interrupt Status +#define HIB_MIS_LOWBAT 0x00000004 // Low Battery Voltage Masked + // Interrupt Status +#define HIB_MIS_RTCALT0 0x00000001 // RTC Alert 0 Masked Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_IC register. +// +//***************************************************************************** +#define HIB_IC_VDDFAIL 0x00000080 // VDD Fail Interrupt Clear +#define HIB_IC_RSTWK 0x00000040 // Reset Pad I/O Wake-Up Interrupt + // Clear +#define HIB_IC_PADIOWK 0x00000020 // Pad I/O Wake-Up Interrupt Clear +#define HIB_IC_WC 0x00000010 // Write Complete/Capable Interrupt + // Clear +#define HIB_IC_EXTW 0x00000008 // External Wake-Up Interrupt Clear +#define HIB_IC_LOWBAT 0x00000004 // Low Battery Voltage Interrupt + // Clear +#define HIB_IC_RTCALT0 0x00000001 // RTC Alert0 Masked Interrupt + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCT register. +// +//***************************************************************************** +#define HIB_RTCT_TRIM_M 0x0000FFFF // RTC Trim Value +#define HIB_RTCT_TRIM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_RTCSS register. +// +//***************************************************************************** +#define HIB_RTCSS_RTCSSM_M 0x7FFF0000 // RTC Sub Seconds Match +#define HIB_RTCSS_RTCSSC_M 0x00007FFF // RTC Sub Seconds Count +#define HIB_RTCSS_RTCSSM_S 16 +#define HIB_RTCSS_RTCSSC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_IO register. +// +//***************************************************************************** +#define HIB_IO_IOWRC 0x80000000 // I/O Write Complete +#define HIB_IO_WURSTEN 0x00000010 // Reset Wake Source Enable +#define HIB_IO_WUUNLK 0x00000001 // I/O Wake Pad Configuration + // Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_DATA register. +// +//***************************************************************************** +#define HIB_DATA_RTD_M 0xFFFFFFFF // Hibernation Module NV Data +#define HIB_DATA_RTD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_CALCTL register. +// +//***************************************************************************** +#define HIB_CALCTL_CAL24 0x00000004 // Calendar Mode +#define HIB_CALCTL_CALEN 0x00000001 // RTC Calendar/Counter Mode Select + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_CAL0 register. +// +//***************************************************************************** +#define HIB_CAL0_VALID 0x80000000 // Valid Calendar Load +#define HIB_CAL0_AMPM 0x00400000 // AM/PM Designation +#define HIB_CAL0_HR_M 0x001F0000 // Hours +#define HIB_CAL0_MIN_M 0x00003F00 // Minutes +#define HIB_CAL0_SEC_M 0x0000003F // Seconds +#define HIB_CAL0_HR_S 16 +#define HIB_CAL0_MIN_S 8 +#define HIB_CAL0_SEC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_CAL1 register. +// +//***************************************************************************** +#define HIB_CAL1_VALID 0x80000000 // Valid Calendar Load +#define HIB_CAL1_DOW_M 0x07000000 // Day of Week +#define HIB_CAL1_YEAR_M 0x007F0000 // Year Value +#define HIB_CAL1_MON_M 0x00000F00 // Month +#define HIB_CAL1_DOM_M 0x0000001F // Day of Month +#define HIB_CAL1_DOW_S 24 +#define HIB_CAL1_YEAR_S 16 +#define HIB_CAL1_MON_S 8 +#define HIB_CAL1_DOM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_CALLD0 register. +// +//***************************************************************************** +#define HIB_CALLD0_AMPM 0x00400000 // AM/PM Designation +#define HIB_CALLD0_HR_M 0x001F0000 // Hours +#define HIB_CALLD0_MIN_M 0x00003F00 // Minutes +#define HIB_CALLD0_SEC_M 0x0000003F // Seconds +#define HIB_CALLD0_HR_S 16 +#define HIB_CALLD0_MIN_S 8 +#define HIB_CALLD0_SEC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_CALLD1 register. +// +//***************************************************************************** +#define HIB_CALLD1_DOW_M 0x07000000 // Day of Week +#define HIB_CALLD1_YEAR_M 0x007F0000 // Year Value +#define HIB_CALLD1_MON_M 0x00000F00 // Month +#define HIB_CALLD1_DOM_M 0x0000001F // Day of Month +#define HIB_CALLD1_DOW_S 24 +#define HIB_CALLD1_YEAR_S 16 +#define HIB_CALLD1_MON_S 8 +#define HIB_CALLD1_DOM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_CALM0 register. +// +//***************************************************************************** +#define HIB_CALM0_AMPM 0x00400000 // AM/PM Designation +#define HIB_CALM0_HR_M 0x001F0000 // Hours +#define HIB_CALM0_MIN_M 0x00003F00 // Minutes +#define HIB_CALM0_SEC_M 0x0000003F // Seconds +#define HIB_CALM0_HR_S 16 +#define HIB_CALM0_MIN_S 8 +#define HIB_CALM0_SEC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_CALM1 register. +// +//***************************************************************************** +#define HIB_CALM1_DOM_M 0x0000001F // Day of Month +#define HIB_CALM1_DOM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_LOCK register. +// +//***************************************************************************** +#define HIB_LOCK_HIBLOCK_M 0xFFFFFFFF // HIbernate Lock +#define HIB_LOCK_HIBLOCK_KEY 0xA3359554 // Hibernate Lock Key +#define HIB_LOCK_HIBLOCK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_TPCTL register. +// +//***************************************************************************** +#define HIB_TPCTL_WAKE 0x00000800 // Wake from Hibernate on a Tamper + // Event +#define HIB_TPCTL_MEMCLR_M 0x00000300 // HIB Memory Clear on Tamper Event +#define HIB_TPCTL_MEMCLR_NONE 0x00000000 // Do not Clear HIB memory on + // tamper event +#define HIB_TPCTL_MEMCLR_LOW32 0x00000100 // Clear Lower 32 Bytes of HIB + // memory on tamper event +#define HIB_TPCTL_MEMCLR_HIGH32 0x00000200 // Clear upper 32 Bytes of HIB + // memory on tamper event +#define HIB_TPCTL_MEMCLR_ALL 0x00000300 // Clear all HIB memory on tamper + // event +#define HIB_TPCTL_TPCLR 0x00000010 // Tamper Event Clear +#define HIB_TPCTL_TPEN 0x00000001 // Tamper Module Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_TPSTAT register. +// +//***************************************************************************** +#define HIB_TPSTAT_STATE_M 0x0000000C // Tamper Module Status +#define HIB_TPSTAT_STATE_DISABLED \ + 0x00000000 // Tamper disabled +#define HIB_TPSTAT_STATE_CONFIGED \ + 0x00000004 // Tamper configured +#define HIB_TPSTAT_STATE_ERROR 0x00000008 // Tamper pin event occurred +#define HIB_TPSTAT_XOSCST 0x00000002 // External Oscillator Status +#define HIB_TPSTAT_XOSCFAIL 0x00000001 // External Oscillator Failure + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_TPIO register. +// +//***************************************************************************** +#define HIB_TPIO_GFLTR3 0x08000000 // TMPR3 Glitch Filtering +#define HIB_TPIO_PUEN3 0x04000000 // TMPR3 Internal Weak Pull-up + // Enable +#define HIB_TPIO_LEV3 0x02000000 // TMPR3 Trigger Level +#define HIB_TPIO_EN3 0x01000000 // TMPR3 Enable +#define HIB_TPIO_GFLTR2 0x00080000 // TMPR2 Glitch Filtering +#define HIB_TPIO_PUEN2 0x00040000 // TMPR2 Internal Weak Pull-up + // Enable +#define HIB_TPIO_LEV2 0x00020000 // TMPR2 Trigger Level +#define HIB_TPIO_EN2 0x00010000 // TMPR2 Enable +#define HIB_TPIO_GFLTR1 0x00000800 // TMPR1 Glitch Filtering +#define HIB_TPIO_PUEN1 0x00000400 // TMPR1 Internal Weak Pull-up + // Enable +#define HIB_TPIO_LEV1 0x00000200 // TMPR1 Trigger Level +#define HIB_TPIO_EN1 0x00000100 // TMPR1Enable +#define HIB_TPIO_GFLTR0 0x00000008 // TMPR0 Glitch Filtering +#define HIB_TPIO_PUEN0 0x00000004 // TMPR0 Internal Weak Pull-up + // Enable +#define HIB_TPIO_LEV0 0x00000002 // TMPR0 Trigger Level +#define HIB_TPIO_EN0 0x00000001 // TMPR0 Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_TPLOG0 register. +// +//***************************************************************************** +#define HIB_TPLOG0_TIME_M 0xFFFFFFFF // Tamper Log Calendar Information +#define HIB_TPLOG0_TIME_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_TPLOG1 register. +// +//***************************************************************************** +#define HIB_TPLOG1_XOSC 0x00010000 // Status of external 32 +#define HIB_TPLOG1_TRIG3 0x00000008 // Status of TMPR[3] Trigger +#define HIB_TPLOG1_TRIG2 0x00000004 // Status of TMPR[2] Trigger +#define HIB_TPLOG1_TRIG1 0x00000002 // Status of TMPR[1] Trigger +#define HIB_TPLOG1_TRIG0 0x00000001 // Status of TMPR[0] Trigger + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_TPLOG2 register. +// +//***************************************************************************** +#define HIB_TPLOG2_TIME_M 0xFFFFFFFF // Tamper Log Calendar Information +#define HIB_TPLOG2_TIME_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_TPLOG3 register. +// +//***************************************************************************** +#define HIB_TPLOG3_XOSC 0x00010000 // Status of external 32 +#define HIB_TPLOG3_TRIG3 0x00000008 // Status of TMPR[3] Trigger +#define HIB_TPLOG3_TRIG2 0x00000004 // Status of TMPR[2] Trigger +#define HIB_TPLOG3_TRIG1 0x00000002 // Status of TMPR[1] Trigger +#define HIB_TPLOG3_TRIG0 0x00000001 // Status of TMPR[0] Trigger + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_TPLOG4 register. +// +//***************************************************************************** +#define HIB_TPLOG4_TIME_M 0xFFFFFFFF // Tamper Log Calendar Information +#define HIB_TPLOG4_TIME_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_TPLOG5 register. +// +//***************************************************************************** +#define HIB_TPLOG5_XOSC 0x00010000 // Status of external 32 +#define HIB_TPLOG5_TRIG3 0x00000008 // Status of TMPR[3] Trigger +#define HIB_TPLOG5_TRIG2 0x00000004 // Status of TMPR[2] Trigger +#define HIB_TPLOG5_TRIG1 0x00000002 // Status of TMPR[1] Trigger +#define HIB_TPLOG5_TRIG0 0x00000001 // Status of TMPR[0] Trigger + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_TPLOG6 register. +// +//***************************************************************************** +#define HIB_TPLOG6_TIME_M 0xFFFFFFFF // Tamper Log Calendar Information +#define HIB_TPLOG6_TIME_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_TPLOG7 register. +// +//***************************************************************************** +#define HIB_TPLOG7_XOSC 0x00010000 // Status of external 32 +#define HIB_TPLOG7_TRIG3 0x00000008 // Status of TMPR[3] Trigger +#define HIB_TPLOG7_TRIG2 0x00000004 // Status of TMPR[2] Trigger +#define HIB_TPLOG7_TRIG1 0x00000002 // Status of TMPR[1] Trigger +#define HIB_TPLOG7_TRIG0 0x00000001 // Status of TMPR[0] Trigger + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_PP register. +// +//***************************************************************************** +#define HIB_PP_TAMPER 0x00000002 // Tamper Pin Presence +#define HIB_PP_WAKENC 0x00000001 // Wake Pin Presence + +//***************************************************************************** +// +// The following are defines for the bit fields in the HIB_CC register. +// +//***************************************************************************** +#define HIB_CC_SYSCLKEN 0x00000001 // RTCOSC to System Clock Enable + +#endif // __HW_HIBERNATE_H__ diff --git a/os/common/ext/TivaWare/inc/hw_i2c.h b/os/common/ext/TivaWare/inc/hw_i2c.h new file mode 100644 index 0000000..2cc2032 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_i2c.h @@ -0,0 +1,470 @@ +//***************************************************************************** +// +// hw_i2c.h - Macros used when accessing the I2C master and slave hardware. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_I2C_H__ +#define __HW_I2C_H__ + +//***************************************************************************** +// +// The following are defines for the I2C register offsets. +// +//***************************************************************************** +#define I2C_O_MSA 0x00000000 // I2C Master Slave Address +#define I2C_O_MCS 0x00000004 // I2C Master Control/Status +#define I2C_O_MDR 0x00000008 // I2C Master Data +#define I2C_O_MTPR 0x0000000C // I2C Master Timer Period +#define I2C_O_MIMR 0x00000010 // I2C Master Interrupt Mask +#define I2C_O_MRIS 0x00000014 // I2C Master Raw Interrupt Status +#define I2C_O_MMIS 0x00000018 // I2C Master Masked Interrupt + // Status +#define I2C_O_MICR 0x0000001C // I2C Master Interrupt Clear +#define I2C_O_MCR 0x00000020 // I2C Master Configuration +#define I2C_O_MCLKOCNT 0x00000024 // I2C Master Clock Low Timeout + // Count +#define I2C_O_MBMON 0x0000002C // I2C Master Bus Monitor +#define I2C_O_MBLEN 0x00000030 // I2C Master Burst Length +#define I2C_O_MBCNT 0x00000034 // I2C Master Burst Count +#define I2C_O_MCR2 0x00000038 // I2C Master Configuration 2 +#define I2C_O_SOAR 0x00000800 // I2C Slave Own Address +#define I2C_O_SCSR 0x00000804 // I2C Slave Control/Status +#define I2C_O_SDR 0x00000808 // I2C Slave Data +#define I2C_O_SIMR 0x0000080C // I2C Slave Interrupt Mask +#define I2C_O_SRIS 0x00000810 // I2C Slave Raw Interrupt Status +#define I2C_O_SMIS 0x00000814 // I2C Slave Masked Interrupt + // Status +#define I2C_O_SICR 0x00000818 // I2C Slave Interrupt Clear +#define I2C_O_SOAR2 0x0000081C // I2C Slave Own Address 2 +#define I2C_O_SACKCTL 0x00000820 // I2C Slave ACK Control +#define I2C_O_FIFODATA 0x00000F00 // I2C FIFO Data +#define I2C_O_FIFOCTL 0x00000F04 // I2C FIFO Control +#define I2C_O_FIFOSTATUS 0x00000F08 // I2C FIFO Status +#define I2C_O_PP 0x00000FC0 // I2C Peripheral Properties +#define I2C_O_PC 0x00000FC4 // I2C Peripheral Configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MSA register. +// +//***************************************************************************** +#define I2C_MSA_SA_M 0x000000FE // I2C Slave Address +#define I2C_MSA_RS 0x00000001 // Receive not send +#define I2C_MSA_SA_S 1 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MCS register. +// +//***************************************************************************** +#define I2C_MCS_ACTDMARX 0x80000000 // DMA RX Active Status +#define I2C_MCS_ACTDMATX 0x40000000 // DMA TX Active Status +#define I2C_MCS_CLKTO 0x00000080 // Clock Timeout Error +#define I2C_MCS_BURST 0x00000040 // Burst Enable +#define I2C_MCS_BUSBSY 0x00000040 // Bus Busy +#define I2C_MCS_IDLE 0x00000020 // I2C Idle +#define I2C_MCS_QCMD 0x00000020 // Quick Command +#define I2C_MCS_ARBLST 0x00000010 // Arbitration Lost +#define I2C_MCS_HS 0x00000010 // High-Speed Enable +#define I2C_MCS_ACK 0x00000008 // Data Acknowledge Enable +#define I2C_MCS_DATACK 0x00000008 // Acknowledge Data +#define I2C_MCS_ADRACK 0x00000004 // Acknowledge Address +#define I2C_MCS_STOP 0x00000004 // Generate STOP +#define I2C_MCS_ERROR 0x00000002 // Error +#define I2C_MCS_START 0x00000002 // Generate START +#define I2C_MCS_RUN 0x00000001 // I2C Master Enable +#define I2C_MCS_BUSY 0x00000001 // I2C Busy + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MDR register. +// +//***************************************************************************** +#define I2C_MDR_DATA_M 0x000000FF // This byte contains the data + // transferred during a transaction +#define I2C_MDR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MTPR register. +// +//***************************************************************************** +#define I2C_MTPR_PULSEL_M 0x00070000 // Glitch Suppression Pulse Width +#define I2C_MTPR_PULSEL_BYPASS 0x00000000 // Bypass +#define I2C_MTPR_PULSEL_1 0x00010000 // 1 clock +#define I2C_MTPR_PULSEL_2 0x00020000 // 2 clocks +#define I2C_MTPR_PULSEL_3 0x00030000 // 3 clocks +#define I2C_MTPR_PULSEL_4 0x00040000 // 4 clocks +#define I2C_MTPR_PULSEL_8 0x00050000 // 8 clocks +#define I2C_MTPR_PULSEL_16 0x00060000 // 16 clocks +#define I2C_MTPR_PULSEL_31 0x00070000 // 31 clocks +#define I2C_MTPR_HS 0x00000080 // High-Speed Enable +#define I2C_MTPR_TPR_M 0x0000007F // Timer Period +#define I2C_MTPR_TPR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MIMR register. +// +//***************************************************************************** +#define I2C_MIMR_RXFFIM 0x00000800 // Receive FIFO Full Interrupt Mask +#define I2C_MIMR_TXFEIM 0x00000400 // Transmit FIFO Empty Interrupt + // Mask +#define I2C_MIMR_RXIM 0x00000200 // Receive FIFO Request Interrupt + // Mask +#define I2C_MIMR_TXIM 0x00000100 // Transmit FIFO Request Interrupt + // Mask +#define I2C_MIMR_ARBLOSTIM 0x00000080 // Arbitration Lost Interrupt Mask +#define I2C_MIMR_STOPIM 0x00000040 // STOP Detection Interrupt Mask +#define I2C_MIMR_STARTIM 0x00000020 // START Detection Interrupt Mask +#define I2C_MIMR_NACKIM 0x00000010 // Address/Data NACK Interrupt Mask +#define I2C_MIMR_DMATXIM 0x00000008 // Transmit DMA Interrupt Mask +#define I2C_MIMR_DMARXIM 0x00000004 // Receive DMA Interrupt Mask +#define I2C_MIMR_CLKIM 0x00000002 // Clock Timeout Interrupt Mask +#define I2C_MIMR_IM 0x00000001 // Master Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MRIS register. +// +//***************************************************************************** +#define I2C_MRIS_RXFFRIS 0x00000800 // Receive FIFO Full Raw Interrupt + // Status +#define I2C_MRIS_TXFERIS 0x00000400 // Transmit FIFO Empty Raw + // Interrupt Status +#define I2C_MRIS_RXRIS 0x00000200 // Receive FIFO Request Raw + // Interrupt Status +#define I2C_MRIS_TXRIS 0x00000100 // Transmit Request Raw Interrupt + // Status +#define I2C_MRIS_ARBLOSTRIS 0x00000080 // Arbitration Lost Raw Interrupt + // Status +#define I2C_MRIS_STOPRIS 0x00000040 // STOP Detection Raw Interrupt + // Status +#define I2C_MRIS_STARTRIS 0x00000020 // START Detection Raw Interrupt + // Status +#define I2C_MRIS_NACKRIS 0x00000010 // Address/Data NACK Raw Interrupt + // Status +#define I2C_MRIS_DMATXRIS 0x00000008 // Transmit DMA Raw Interrupt + // Status +#define I2C_MRIS_DMARXRIS 0x00000004 // Receive DMA Raw Interrupt Status +#define I2C_MRIS_CLKRIS 0x00000002 // Clock Timeout Raw Interrupt + // Status +#define I2C_MRIS_RIS 0x00000001 // Master Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MMIS register. +// +//***************************************************************************** +#define I2C_MMIS_RXFFMIS 0x00000800 // Receive FIFO Full Interrupt Mask +#define I2C_MMIS_TXFEMIS 0x00000400 // Transmit FIFO Empty Interrupt + // Mask +#define I2C_MMIS_RXMIS 0x00000200 // Receive FIFO Request Interrupt + // Mask +#define I2C_MMIS_TXMIS 0x00000100 // Transmit Request Interrupt Mask +#define I2C_MMIS_ARBLOSTMIS 0x00000080 // Arbitration Lost Interrupt Mask +#define I2C_MMIS_STOPMIS 0x00000040 // STOP Detection Interrupt Mask +#define I2C_MMIS_STARTMIS 0x00000020 // START Detection Interrupt Mask +#define I2C_MMIS_NACKMIS 0x00000010 // Address/Data NACK Interrupt Mask +#define I2C_MMIS_DMATXMIS 0x00000008 // Transmit DMA Interrupt Status +#define I2C_MMIS_DMARXMIS 0x00000004 // Receive DMA Interrupt Status +#define I2C_MMIS_CLKMIS 0x00000002 // Clock Timeout Masked Interrupt + // Status +#define I2C_MMIS_MIS 0x00000001 // Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MICR register. +// +//***************************************************************************** +#define I2C_MICR_RXFFIC 0x00000800 // Receive FIFO Full Interrupt + // Clear +#define I2C_MICR_TXFEIC 0x00000400 // Transmit FIFO Empty Interrupt + // Clear +#define I2C_MICR_RXIC 0x00000200 // Receive FIFO Request Interrupt + // Clear +#define I2C_MICR_TXIC 0x00000100 // Transmit FIFO Request Interrupt + // Clear +#define I2C_MICR_ARBLOSTIC 0x00000080 // Arbitration Lost Interrupt Clear +#define I2C_MICR_STOPIC 0x00000040 // STOP Detection Interrupt Clear +#define I2C_MICR_STARTIC 0x00000020 // START Detection Interrupt Clear +#define I2C_MICR_NACKIC 0x00000010 // Address/Data NACK Interrupt + // Clear +#define I2C_MICR_DMATXIC 0x00000008 // Transmit DMA Interrupt Clear +#define I2C_MICR_DMARXIC 0x00000004 // Receive DMA Interrupt Clear +#define I2C_MICR_CLKIC 0x00000002 // Clock Timeout Interrupt Clear +#define I2C_MICR_IC 0x00000001 // Master Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MCR register. +// +//***************************************************************************** +#define I2C_MCR_GFE 0x00000040 // I2C Glitch Filter Enable +#define I2C_MCR_SFE 0x00000020 // I2C Slave Function Enable +#define I2C_MCR_MFE 0x00000010 // I2C Master Function Enable +#define I2C_MCR_LPBK 0x00000001 // I2C Loopback + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MCLKOCNT register. +// +//***************************************************************************** +#define I2C_MCLKOCNT_CNTL_M 0x000000FF // I2C Master Count +#define I2C_MCLKOCNT_CNTL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MBMON register. +// +//***************************************************************************** +#define I2C_MBMON_SDA 0x00000002 // I2C SDA Status +#define I2C_MBMON_SCL 0x00000001 // I2C SCL Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MBLEN register. +// +//***************************************************************************** +#define I2C_MBLEN_CNTL_M 0x000000FF // I2C Burst Length +#define I2C_MBLEN_CNTL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MBCNT register. +// +//***************************************************************************** +#define I2C_MBCNT_CNTL_M 0x000000FF // I2C Master Burst Count +#define I2C_MBCNT_CNTL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_MCR2 register. +// +//***************************************************************************** +#define I2C_MCR2_GFPW_M 0x00000070 // I2C Glitch Filter Pulse Width +#define I2C_MCR2_GFPW_BYPASS 0x00000000 // Bypass +#define I2C_MCR2_GFPW_1 0x00000010 // 1 clock +#define I2C_MCR2_GFPW_2 0x00000020 // 2 clocks +#define I2C_MCR2_GFPW_3 0x00000030 // 3 clocks +#define I2C_MCR2_GFPW_4 0x00000040 // 4 clocks +#define I2C_MCR2_GFPW_8 0x00000050 // 8 clocks +#define I2C_MCR2_GFPW_16 0x00000060 // 16 clocks +#define I2C_MCR2_GFPW_31 0x00000070 // 31 clocks + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SOAR register. +// +//***************************************************************************** +#define I2C_SOAR_OAR_M 0x0000007F // I2C Slave Own Address +#define I2C_SOAR_OAR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SCSR register. +// +//***************************************************************************** +#define I2C_SCSR_ACTDMARX 0x80000000 // DMA RX Active Status +#define I2C_SCSR_ACTDMATX 0x40000000 // DMA TX Active Status +#define I2C_SCSR_QCMDRW 0x00000020 // Quick Command Read / Write +#define I2C_SCSR_QCMDST 0x00000010 // Quick Command Status +#define I2C_SCSR_OAR2SEL 0x00000008 // OAR2 Address Matched +#define I2C_SCSR_FBR 0x00000004 // First Byte Received +#define I2C_SCSR_RXFIFO 0x00000004 // RX FIFO Enable +#define I2C_SCSR_TXFIFO 0x00000002 // TX FIFO Enable +#define I2C_SCSR_TREQ 0x00000002 // Transmit Request +#define I2C_SCSR_DA 0x00000001 // Device Active +#define I2C_SCSR_RREQ 0x00000001 // Receive Request + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SDR register. +// +//***************************************************************************** +#define I2C_SDR_DATA_M 0x000000FF // Data for Transfer +#define I2C_SDR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SIMR register. +// +//***************************************************************************** +#define I2C_SIMR_RXFFIM 0x00000100 // Receive FIFO Full Interrupt Mask +#define I2C_SIMR_TXFEIM 0x00000080 // Transmit FIFO Empty Interrupt + // Mask +#define I2C_SIMR_RXIM 0x00000040 // Receive FIFO Request Interrupt + // Mask +#define I2C_SIMR_TXIM 0x00000020 // Transmit FIFO Request Interrupt + // Mask +#define I2C_SIMR_DMATXIM 0x00000010 // Transmit DMA Interrupt Mask +#define I2C_SIMR_DMARXIM 0x00000008 // Receive DMA Interrupt Mask +#define I2C_SIMR_STOPIM 0x00000004 // Stop Condition Interrupt Mask +#define I2C_SIMR_STARTIM 0x00000002 // Start Condition Interrupt Mask +#define I2C_SIMR_DATAIM 0x00000001 // Data Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SRIS register. +// +//***************************************************************************** +#define I2C_SRIS_RXFFRIS 0x00000100 // Receive FIFO Full Raw Interrupt + // Status +#define I2C_SRIS_TXFERIS 0x00000080 // Transmit FIFO Empty Raw + // Interrupt Status +#define I2C_SRIS_RXRIS 0x00000040 // Receive FIFO Request Raw + // Interrupt Status +#define I2C_SRIS_TXRIS 0x00000020 // Transmit Request Raw Interrupt + // Status +#define I2C_SRIS_DMATXRIS 0x00000010 // Transmit DMA Raw Interrupt + // Status +#define I2C_SRIS_DMARXRIS 0x00000008 // Receive DMA Raw Interrupt Status +#define I2C_SRIS_STOPRIS 0x00000004 // Stop Condition Raw Interrupt + // Status +#define I2C_SRIS_STARTRIS 0x00000002 // Start Condition Raw Interrupt + // Status +#define I2C_SRIS_DATARIS 0x00000001 // Data Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SMIS register. +// +//***************************************************************************** +#define I2C_SMIS_RXFFMIS 0x00000100 // Receive FIFO Full Interrupt Mask +#define I2C_SMIS_TXFEMIS 0x00000080 // Transmit FIFO Empty Interrupt + // Mask +#define I2C_SMIS_RXMIS 0x00000040 // Receive FIFO Request Interrupt + // Mask +#define I2C_SMIS_TXMIS 0x00000020 // Transmit FIFO Request Interrupt + // Mask +#define I2C_SMIS_DMATXMIS 0x00000010 // Transmit DMA Masked Interrupt + // Status +#define I2C_SMIS_DMARXMIS 0x00000008 // Receive DMA Masked Interrupt + // Status +#define I2C_SMIS_STOPMIS 0x00000004 // Stop Condition Masked Interrupt + // Status +#define I2C_SMIS_STARTMIS 0x00000002 // Start Condition Masked Interrupt + // Status +#define I2C_SMIS_DATAMIS 0x00000001 // Data Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SICR register. +// +//***************************************************************************** +#define I2C_SICR_RXFFIC 0x00000100 // Receive FIFO Full Interrupt Mask +#define I2C_SICR_TXFEIC 0x00000080 // Transmit FIFO Empty Interrupt + // Mask +#define I2C_SICR_RXIC 0x00000040 // Receive Request Interrupt Mask +#define I2C_SICR_TXIC 0x00000020 // Transmit Request Interrupt Mask +#define I2C_SICR_DMATXIC 0x00000010 // Transmit DMA Interrupt Clear +#define I2C_SICR_DMARXIC 0x00000008 // Receive DMA Interrupt Clear +#define I2C_SICR_STOPIC 0x00000004 // Stop Condition Interrupt Clear +#define I2C_SICR_STARTIC 0x00000002 // Start Condition Interrupt Clear +#define I2C_SICR_DATAIC 0x00000001 // Data Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SOAR2 register. +// +//***************************************************************************** +#define I2C_SOAR2_OAR2EN 0x00000080 // I2C Slave Own Address 2 Enable +#define I2C_SOAR2_OAR2_M 0x0000007F // I2C Slave Own Address 2 +#define I2C_SOAR2_OAR2_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_SACKCTL register. +// +//***************************************************************************** +#define I2C_SACKCTL_ACKOVAL 0x00000002 // I2C Slave ACK Override Value +#define I2C_SACKCTL_ACKOEN 0x00000001 // I2C Slave ACK Override Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_FIFODATA register. +// +//***************************************************************************** +#define I2C_FIFODATA_DATA_M 0x000000FF // I2C TX FIFO Write Data Byte +#define I2C_FIFODATA_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_FIFOCTL register. +// +//***************************************************************************** +#define I2C_FIFOCTL_RXASGNMT 0x80000000 // RX Control Assignment +#define I2C_FIFOCTL_RXFLUSH 0x40000000 // RX FIFO Flush +#define I2C_FIFOCTL_DMARXENA 0x20000000 // DMA RX Channel Enable +#define I2C_FIFOCTL_RXTRIG_M 0x00070000 // RX FIFO Trigger +#define I2C_FIFOCTL_TXASGNMT 0x00008000 // TX Control Assignment +#define I2C_FIFOCTL_TXFLUSH 0x00004000 // TX FIFO Flush +#define I2C_FIFOCTL_DMATXENA 0x00002000 // DMA TX Channel Enable +#define I2C_FIFOCTL_TXTRIG_M 0x00000007 // TX FIFO Trigger +#define I2C_FIFOCTL_RXTRIG_S 16 +#define I2C_FIFOCTL_TXTRIG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_FIFOSTATUS +// register. +// +//***************************************************************************** +#define I2C_FIFOSTATUS_RXABVTRIG \ + 0x00040000 // RX FIFO Above Trigger Level +#define I2C_FIFOSTATUS_RXFF 0x00020000 // RX FIFO Full +#define I2C_FIFOSTATUS_RXFE 0x00010000 // RX FIFO Empty +#define I2C_FIFOSTATUS_TXBLWTRIG \ + 0x00000004 // TX FIFO Below Trigger Level +#define I2C_FIFOSTATUS_TXFF 0x00000002 // TX FIFO Full +#define I2C_FIFOSTATUS_TXFE 0x00000001 // TX FIFO Empty + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_PP register. +// +//***************************************************************************** +#define I2C_PP_HS 0x00000001 // High-Speed Capable + +//***************************************************************************** +// +// The following are defines for the bit fields in the I2C_O_PC register. +// +//***************************************************************************** +#define I2C_PC_HS 0x00000001 // High-Speed Capable + +#endif // __HW_I2C_H__ diff --git a/os/common/ext/TivaWare/inc/hw_ints.h b/os/common/ext/TivaWare/inc/hw_ints.h new file mode 100644 index 0000000..d8efb43 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_ints.h @@ -0,0 +1,491 @@ +//***************************************************************************** +// +// hw_ints.h - Macros that define the interrupt assignment on Tiva C Series +// MCUs. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_INTS_H__ +#define __HW_INTS_H__ + +//***************************************************************************** +// +// The following are defines for the fault assignments. +// +//***************************************************************************** +#define FAULT_NMI 2 // NMI fault +#define FAULT_HARD 3 // Hard fault +#define FAULT_MPU 4 // MPU fault +#define FAULT_BUS 5 // Bus fault +#define FAULT_USAGE 6 // Usage fault +#define FAULT_SVCALL 11 // SVCall +#define FAULT_DEBUG 12 // Debug monitor +#define FAULT_PENDSV 14 // PendSV +#define FAULT_SYSTICK 15 // System Tick + +//***************************************************************************** +// +// TM4C123 Class Interrupts +// +//***************************************************************************** +#define INT_GPIOA_TM4C123 16 // GPIO Port A +#define INT_GPIOB_TM4C123 17 // GPIO Port B +#define INT_GPIOC_TM4C123 18 // GPIO Port C +#define INT_GPIOD_TM4C123 19 // GPIO Port D +#define INT_GPIOE_TM4C123 20 // GPIO Port E +#define INT_UART0_TM4C123 21 // UART0 +#define INT_UART1_TM4C123 22 // UART1 +#define INT_SSI0_TM4C123 23 // SSI0 +#define INT_I2C0_TM4C123 24 // I2C0 +#define INT_PWM0_FAULT_TM4C123 25 // PWM0 Fault +#define INT_PWM0_0_TM4C123 26 // PWM0 Generator 0 +#define INT_PWM0_1_TM4C123 27 // PWM0 Generator 1 +#define INT_PWM0_2_TM4C123 28 // PWM0 Generator 2 +#define INT_QEI0_TM4C123 29 // QEI0 +#define INT_ADC0SS0_TM4C123 30 // ADC0 Sequence 0 +#define INT_ADC0SS1_TM4C123 31 // ADC0 Sequence 1 +#define INT_ADC0SS2_TM4C123 32 // ADC0 Sequence 2 +#define INT_ADC0SS3_TM4C123 33 // ADC0 Sequence 3 +#define INT_WATCHDOG_TM4C123 34 // Watchdog Timers 0 and 1 +#define INT_TIMER0A_TM4C123 35 // 16/32-Bit Timer 0A +#define INT_TIMER0B_TM4C123 36 // 16/32-Bit Timer 0B +#define INT_TIMER1A_TM4C123 37 // 16/32-Bit Timer 1A +#define INT_TIMER1B_TM4C123 38 // 16/32-Bit Timer 1B +#define INT_TIMER2A_TM4C123 39 // 16/32-Bit Timer 2A +#define INT_TIMER2B_TM4C123 40 // 16/32-Bit Timer 2B +#define INT_COMP0_TM4C123 41 // Analog Comparator 0 +#define INT_COMP1_TM4C123 42 // Analog Comparator 1 +#define INT_COMP2_TM4C123 43 // Analog Comparator 2 +#define INT_SYSCTL_TM4C123 44 // System Control +#define INT_FLASH_TM4C123 45 // Flash Memory Control and EEPROM + // Control +#define INT_GPIOF_TM4C123 46 // GPIO Port F +#define INT_GPIOG_TM4C123 47 // GPIO Port G +#define INT_GPIOH_TM4C123 48 // GPIO Port H +#define INT_UART2_TM4C123 49 // UART2 +#define INT_SSI1_TM4C123 50 // SSI1 +#define INT_TIMER3A_TM4C123 51 // 16/32-Bit Timer 3A +#define INT_TIMER3B_TM4C123 52 // Timer 3B +#define INT_I2C1_TM4C123 53 // I2C1 +#define INT_QEI1_TM4C123 54 // QEI1 +#define INT_CAN0_TM4C123 55 // CAN0 +#define INT_CAN1_TM4C123 56 // CAN1 +#define INT_HIBERNATE_TM4C123 59 // Hibernation Module +#define INT_USB0_TM4C123 60 // USB +#define INT_PWM0_3_TM4C123 61 // PWM Generator 3 +#define INT_UDMA_TM4C123 62 // uDMA Software +#define INT_UDMAERR_TM4C123 63 // uDMA Error +#define INT_ADC1SS0_TM4C123 64 // ADC1 Sequence 0 +#define INT_ADC1SS1_TM4C123 65 // ADC1 Sequence 1 +#define INT_ADC1SS2_TM4C123 66 // ADC1 Sequence 2 +#define INT_ADC1SS3_TM4C123 67 // ADC1 Sequence 3 +#define INT_GPIOJ_TM4C123 70 // GPIO Port J +#define INT_GPIOK_TM4C123 71 // GPIO Port K +#define INT_GPIOL_TM4C123 72 // GPIO Port L +#define INT_SSI2_TM4C123 73 // SSI2 +#define INT_SSI3_TM4C123 74 // SSI3 +#define INT_UART3_TM4C123 75 // UART3 +#define INT_UART4_TM4C123 76 // UART4 +#define INT_UART5_TM4C123 77 // UART5 +#define INT_UART6_TM4C123 78 // UART6 +#define INT_UART7_TM4C123 79 // UART7 +#define INT_I2C2_TM4C123 84 // I2C2 +#define INT_I2C3_TM4C123 85 // I2C3 +#define INT_TIMER4A_TM4C123 86 // 16/32-Bit Timer 4A +#define INT_TIMER4B_TM4C123 87 // 16/32-Bit Timer 4B +#define INT_TIMER5A_TM4C123 108 // 16/32-Bit Timer 5A +#define INT_TIMER5B_TM4C123 109 // 16/32-Bit Timer 5B +#define INT_WTIMER0A_TM4C123 110 // 32/64-Bit Timer 0A +#define INT_WTIMER0B_TM4C123 111 // 32/64-Bit Timer 0B +#define INT_WTIMER1A_TM4C123 112 // 32/64-Bit Timer 1A +#define INT_WTIMER1B_TM4C123 113 // 32/64-Bit Timer 1B +#define INT_WTIMER2A_TM4C123 114 // 32/64-Bit Timer 2A +#define INT_WTIMER2B_TM4C123 115 // 32/64-Bit Timer 2B +#define INT_WTIMER3A_TM4C123 116 // 32/64-Bit Timer 3A +#define INT_WTIMER3B_TM4C123 117 // 32/64-Bit Timer 3B +#define INT_WTIMER4A_TM4C123 118 // 32/64-Bit Timer 4A +#define INT_WTIMER4B_TM4C123 119 // 32/64-Bit Timer 4B +#define INT_WTIMER5A_TM4C123 120 // 32/64-Bit Timer 5A +#define INT_WTIMER5B_TM4C123 121 // 32/64-Bit Timer 5B +#define INT_SYSEXC_TM4C123 122 // System Exception (imprecise) +#define INT_I2C4_TM4C123 125 // I2C4 +#define INT_I2C5_TM4C123 126 // I2C5 +#define INT_GPIOM_TM4C123 127 // GPIO Port M +#define INT_GPION_TM4C123 128 // GPIO Port N +#define INT_GPIOP0_TM4C123 132 // GPIO Port P (Summary or P0) +#define INT_GPIOP1_TM4C123 133 // GPIO Port P1 +#define INT_GPIOP2_TM4C123 134 // GPIO Port P2 +#define INT_GPIOP3_TM4C123 135 // GPIO Port P3 +#define INT_GPIOP4_TM4C123 136 // GPIO Port P4 +#define INT_GPIOP5_TM4C123 137 // GPIO Port P5 +#define INT_GPIOP6_TM4C123 138 // GPIO Port P6 +#define INT_GPIOP7_TM4C123 139 // GPIO Port P7 +#define INT_GPIOQ0_TM4C123 140 // GPIO Port Q (Summary or Q0) +#define INT_GPIOQ1_TM4C123 141 // GPIO Port Q1 +#define INT_GPIOQ2_TM4C123 142 // GPIO Port Q2 +#define INT_GPIOQ3_TM4C123 143 // GPIO Port Q3 +#define INT_GPIOQ4_TM4C123 144 // GPIO Port Q4 +#define INT_GPIOQ5_TM4C123 145 // GPIO Port Q5 +#define INT_GPIOQ6_TM4C123 146 // GPIO Port Q6 +#define INT_GPIOQ7_TM4C123 147 // GPIO Port Q7 +#define INT_PWM1_0_TM4C123 150 // PWM1 Generator 0 +#define INT_PWM1_1_TM4C123 151 // PWM1 Generator 1 +#define INT_PWM1_2_TM4C123 152 // PWM1 Generator 2 +#define INT_PWM1_3_TM4C123 153 // PWM1 Generator 3 +#define INT_PWM1_FAULT_TM4C123 154 // PWM1 Fault +#define NUM_INTERRUPTS_TM4C123 155 + +//***************************************************************************** +// +// TM4C129 Class Interrupts +// +//***************************************************************************** +#define INT_GPIOA_TM4C129 16 // GPIO Port A +#define INT_GPIOB_TM4C129 17 // GPIO Port B +#define INT_GPIOC_TM4C129 18 // GPIO Port C +#define INT_GPIOD_TM4C129 19 // GPIO Port D +#define INT_GPIOE_TM4C129 20 // GPIO Port E +#define INT_UART0_TM4C129 21 // UART0 +#define INT_UART1_TM4C129 22 // UART1 +#define INT_SSI0_TM4C129 23 // SSI0 +#define INT_I2C0_TM4C129 24 // I2C0 +#define INT_PWM0_FAULT_TM4C129 25 // PWM Fault +#define INT_PWM0_0_TM4C129 26 // PWM Generator 0 +#define INT_PWM0_1_TM4C129 27 // PWM Generator 1 +#define INT_PWM0_2_TM4C129 28 // PWM Generator 2 +#define INT_QEI0_TM4C129 29 // QEI0 +#define INT_ADC0SS0_TM4C129 30 // ADC0 Sequence 0 +#define INT_ADC0SS1_TM4C129 31 // ADC0 Sequence 1 +#define INT_ADC0SS2_TM4C129 32 // ADC0 Sequence 2 +#define INT_ADC0SS3_TM4C129 33 // ADC0 Sequence 3 +#define INT_WATCHDOG_TM4C129 34 // Watchdog Timers 0 and 1 +#define INT_TIMER0A_TM4C129 35 // 16/32-Bit Timer 0A +#define INT_TIMER0B_TM4C129 36 // 16/32-Bit Timer 0B +#define INT_TIMER1A_TM4C129 37 // 16/32-Bit Timer 1A +#define INT_TIMER1B_TM4C129 38 // 16/32-Bit Timer 1B +#define INT_TIMER2A_TM4C129 39 // 16/32-Bit Timer 2A +#define INT_TIMER2B_TM4C129 40 // 16/32-Bit Timer 2B +#define INT_COMP0_TM4C129 41 // Analog Comparator 0 +#define INT_COMP1_TM4C129 42 // Analog Comparator 1 +#define INT_COMP2_TM4C129 43 // Analog Comparator 2 +#define INT_SYSCTL_TM4C129 44 // System Control +#define INT_FLASH_TM4C129 45 // Flash Memory Control +#define INT_GPIOF_TM4C129 46 // GPIO Port F +#define INT_GPIOG_TM4C129 47 // GPIO Port G +#define INT_GPIOH_TM4C129 48 // GPIO Port H +#define INT_UART2_TM4C129 49 // UART2 +#define INT_SSI1_TM4C129 50 // SSI1 +#define INT_TIMER3A_TM4C129 51 // 16/32-Bit Timer 3A +#define INT_TIMER3B_TM4C129 52 // 16/32-Bit Timer 3B +#define INT_I2C1_TM4C129 53 // I2C1 +#define INT_CAN0_TM4C129 54 // CAN 0 +#define INT_CAN1_TM4C129 55 // CAN1 +#define INT_EMAC0_TM4C129 56 // Ethernet MAC +#define INT_HIBERNATE_TM4C129 57 // HIB +#define INT_USB0_TM4C129 58 // USB MAC +#define INT_PWM0_3_TM4C129 59 // PWM Generator 3 +#define INT_UDMA_TM4C129 60 // uDMA 0 Software +#define INT_UDMAERR_TM4C129 61 // uDMA 0 Error +#define INT_ADC1SS0_TM4C129 62 // ADC1 Sequence 0 +#define INT_ADC1SS1_TM4C129 63 // ADC1 Sequence 1 +#define INT_ADC1SS2_TM4C129 64 // ADC1 Sequence 2 +#define INT_ADC1SS3_TM4C129 65 // ADC1 Sequence 3 +#define INT_EPI0_TM4C129 66 // EPI 0 +#define INT_GPIOJ_TM4C129 67 // GPIO Port J +#define INT_GPIOK_TM4C129 68 // GPIO Port K +#define INT_GPIOL_TM4C129 69 // GPIO Port L +#define INT_SSI2_TM4C129 70 // SSI 2 +#define INT_SSI3_TM4C129 71 // SSI 3 +#define INT_UART3_TM4C129 72 // UART 3 +#define INT_UART4_TM4C129 73 // UART 4 +#define INT_UART5_TM4C129 74 // UART 5 +#define INT_UART6_TM4C129 75 // UART 6 +#define INT_UART7_TM4C129 76 // UART 7 +#define INT_I2C2_TM4C129 77 // I2C 2 +#define INT_I2C3_TM4C129 78 // I2C 3 +#define INT_TIMER4A_TM4C129 79 // Timer 4A +#define INT_TIMER4B_TM4C129 80 // Timer 4B +#define INT_TIMER5A_TM4C129 81 // Timer 5A +#define INT_TIMER5B_TM4C129 82 // Timer 5B +#define INT_SYSEXC_TM4C129 83 // Floating-Point Exception + // (imprecise) +#define INT_I2C4_TM4C129 86 // I2C 4 +#define INT_I2C5_TM4C129 87 // I2C 5 +#define INT_GPIOM_TM4C129 88 // GPIO Port M +#define INT_GPION_TM4C129 89 // GPIO Port N +#define INT_TAMPER0_TM4C129 91 // Tamper +#define INT_GPIOP0_TM4C129 92 // GPIO Port P (Summary or P0) +#define INT_GPIOP1_TM4C129 93 // GPIO Port P1 +#define INT_GPIOP2_TM4C129 94 // GPIO Port P2 +#define INT_GPIOP3_TM4C129 95 // GPIO Port P3 +#define INT_GPIOP4_TM4C129 96 // GPIO Port P4 +#define INT_GPIOP5_TM4C129 97 // GPIO Port P5 +#define INT_GPIOP6_TM4C129 98 // GPIO Port P6 +#define INT_GPIOP7_TM4C129 99 // GPIO Port P7 +#define INT_GPIOQ0_TM4C129 100 // GPIO Port Q (Summary or Q0) +#define INT_GPIOQ1_TM4C129 101 // GPIO Port Q1 +#define INT_GPIOQ2_TM4C129 102 // GPIO Port Q2 +#define INT_GPIOQ3_TM4C129 103 // GPIO Port Q3 +#define INT_GPIOQ4_TM4C129 104 // GPIO Port Q4 +#define INT_GPIOQ5_TM4C129 105 // GPIO Port Q5 +#define INT_GPIOQ6_TM4C129 106 // GPIO Port Q6 +#define INT_GPIOQ7_TM4C129 107 // GPIO Port Q7 +#define INT_GPIOR_TM4C129 108 // GPIO Port R +#define INT_GPIOS_TM4C129 109 // GPIO Port S +#define INT_SHA0_TM4C129 110 // SHA/MD5 +#define INT_AES0_TM4C129 111 // AES +#define INT_DES0_TM4C129 112 // DES +#define INT_LCD0_TM4C129 113 // LCD +#define INT_TIMER6A_TM4C129 114 // 16/32-Bit Timer 6A +#define INT_TIMER6B_TM4C129 115 // 16/32-Bit Timer 6B +#define INT_TIMER7A_TM4C129 116 // 16/32-Bit Timer 7A +#define INT_TIMER7B_TM4C129 117 // 16/32-Bit Timer 7B +#define INT_I2C6_TM4C129 118 // I2C 6 +#define INT_I2C7_TM4C129 119 // I2C 7 +#define INT_ONEWIRE0_TM4C129 121 // 1-Wire +#define INT_I2C8_TM4C129 125 // I2C 8 +#define INT_I2C9_TM4C129 126 // I2C 9 +#define INT_GPIOT_TM4C129 127 // GPIO T +#define NUM_INTERRUPTS_TM4C129 129 + +//***************************************************************************** +// +// TM4C123 Interrupt Class Definition +// +//***************************************************************************** +#if defined(TARGET_IS_TM4C123_RA1) || defined(TARGET_IS_TM4C123_RA2) || \ + defined(TARGET_IS_TM4C123_RA3) || defined(TARGET_IS_TM4C123_RB0) || \ + defined(TARGET_IS_TM4C123_RB1) || defined(PART_TM4C1230C3PM) || \ + defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) || \ + defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || \ + defined(PART_TM4C1231D5PM) || defined(PART_TM4C1231D5PZ) || \ + defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) || \ + defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) || \ + defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || \ + defined(PART_TM4C1232E6PM) || defined(PART_TM4C1232H6PM) || \ + defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) || \ + defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || \ + defined(PART_TM4C1233E6PZ) || defined(PART_TM4C1233H6PM) || \ + defined(PART_TM4C1233H6PZ) || defined(PART_TM4C1236D5PM) || \ + defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) || \ + defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || \ + defined(PART_TM4C1237E6PM) || defined(PART_TM4C1237E6PZ) || \ + defined(PART_TM4C1237H6PM) || defined(PART_TM4C1237H6PZ) || \ + defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) || \ + defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || \ + defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || \ + defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || \ + defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GE6PZ) || \ + defined(PART_TM4C123GH6PM) || defined(PART_TM4C123GH6PZ) || \ + defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1233H6PGE) || \ + defined(PART_TM4C1237H6PGE) || defined(PART_TM4C123BH6PGE) || \ + defined(PART_TM4C123BH6ZRB) || defined(PART_TM4C123GH6PGE) || \ + defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH6ZXR) +#define INT_RESOLVE(intname, class) intname##TM4C123 + +//***************************************************************************** +// +// TM4C129 Interrupt Class Definition +// +//***************************************************************************** +#elif defined(TARGET_IS_TM4C129_RA0) || defined(PART_TM4C1290NCPDT) || \ + defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT) || \ + defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || \ + defined(PART_TM4C1294NCPDT) || defined(PART_TM4C1294NCZAD) || \ + defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD) || \ + defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || \ + defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCPDT) || \ + defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT) || \ + defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || \ + defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD) || \ + defined(PART_TM4C129XNCZAD) +#define INT_RESOLVE(intname, class) intname##TM4C129 +#else +#define INT_DEVICE_CLASS "UNKNOWN" +#endif + +//***************************************************************************** +// +// Macros to resolve the INT_PERIPH_CLASS name to a common INT_PERIPH name. +// +//***************************************************************************** +#define INT_CONCAT(intname, class) INT_RESOLVE(intname, class) + +//***************************************************************************** +// +// The following are defines for the interrupt assignments. +// +//***************************************************************************** +#define INT_ADC0SS0 INT_CONCAT(INT_ADC0SS0_, INT_DEVICE_CLASS) +#define INT_ADC0SS1 INT_CONCAT(INT_ADC0SS1_, INT_DEVICE_CLASS) +#define INT_ADC0SS2 INT_CONCAT(INT_ADC0SS2_, INT_DEVICE_CLASS) +#define INT_ADC0SS3 INT_CONCAT(INT_ADC0SS3_, INT_DEVICE_CLASS) +#define INT_ADC1SS0 INT_CONCAT(INT_ADC1SS0_, INT_DEVICE_CLASS) +#define INT_ADC1SS1 INT_CONCAT(INT_ADC1SS1_, INT_DEVICE_CLASS) +#define INT_ADC1SS2 INT_CONCAT(INT_ADC1SS2_, INT_DEVICE_CLASS) +#define INT_ADC1SS3 INT_CONCAT(INT_ADC1SS3_, INT_DEVICE_CLASS) +#define INT_AES0 INT_CONCAT(INT_AES0_, INT_DEVICE_CLASS) +#define INT_CAN0 INT_CONCAT(INT_CAN0_, INT_DEVICE_CLASS) +#define INT_CAN1 INT_CONCAT(INT_CAN1_, INT_DEVICE_CLASS) +#define INT_COMP0 INT_CONCAT(INT_COMP0_, INT_DEVICE_CLASS) +#define INT_COMP1 INT_CONCAT(INT_COMP1_, INT_DEVICE_CLASS) +#define INT_COMP2 INT_CONCAT(INT_COMP2_, INT_DEVICE_CLASS) +#define INT_DES0 INT_CONCAT(INT_DES0_, INT_DEVICE_CLASS) +#define INT_EMAC0 INT_CONCAT(INT_EMAC0_, INT_DEVICE_CLASS) +#define INT_EPI0 INT_CONCAT(INT_EPI0_, INT_DEVICE_CLASS) +#define INT_FLASH INT_CONCAT(INT_FLASH_, INT_DEVICE_CLASS) +#define INT_GPIOA INT_CONCAT(INT_GPIOA_, INT_DEVICE_CLASS) +#define INT_GPIOB INT_CONCAT(INT_GPIOB_, INT_DEVICE_CLASS) +#define INT_GPIOC INT_CONCAT(INT_GPIOC_, INT_DEVICE_CLASS) +#define INT_GPIOD INT_CONCAT(INT_GPIOD_, INT_DEVICE_CLASS) +#define INT_GPIOE INT_CONCAT(INT_GPIOE_, INT_DEVICE_CLASS) +#define INT_GPIOF INT_CONCAT(INT_GPIOF_, INT_DEVICE_CLASS) +#define INT_GPIOG INT_CONCAT(INT_GPIOG_, INT_DEVICE_CLASS) +#define INT_GPIOH INT_CONCAT(INT_GPIOH_, INT_DEVICE_CLASS) +#define INT_GPIOJ INT_CONCAT(INT_GPIOJ_, INT_DEVICE_CLASS) +#define INT_GPIOK INT_CONCAT(INT_GPIOK_, INT_DEVICE_CLASS) +#define INT_GPIOL INT_CONCAT(INT_GPIOL_, INT_DEVICE_CLASS) +#define INT_GPIOM INT_CONCAT(INT_GPIOM_, INT_DEVICE_CLASS) +#define INT_GPION INT_CONCAT(INT_GPION_, INT_DEVICE_CLASS) +#define INT_GPIOP0 INT_CONCAT(INT_GPIOP0_, INT_DEVICE_CLASS) +#define INT_GPIOP1 INT_CONCAT(INT_GPIOP1_, INT_DEVICE_CLASS) +#define INT_GPIOP2 INT_CONCAT(INT_GPIOP2_, INT_DEVICE_CLASS) +#define INT_GPIOP3 INT_CONCAT(INT_GPIOP3_, INT_DEVICE_CLASS) +#define INT_GPIOP4 INT_CONCAT(INT_GPIOP4_, INT_DEVICE_CLASS) +#define INT_GPIOP5 INT_CONCAT(INT_GPIOP5_, INT_DEVICE_CLASS) +#define INT_GPIOP6 INT_CONCAT(INT_GPIOP6_, INT_DEVICE_CLASS) +#define INT_GPIOP7 INT_CONCAT(INT_GPIOP7_, INT_DEVICE_CLASS) +#define INT_GPIOQ0 INT_CONCAT(INT_GPIOQ0_, INT_DEVICE_CLASS) +#define INT_GPIOQ1 INT_CONCAT(INT_GPIOQ1_, INT_DEVICE_CLASS) +#define INT_GPIOQ2 INT_CONCAT(INT_GPIOQ2_, INT_DEVICE_CLASS) +#define INT_GPIOQ3 INT_CONCAT(INT_GPIOQ3_, INT_DEVICE_CLASS) +#define INT_GPIOQ4 INT_CONCAT(INT_GPIOQ4_, INT_DEVICE_CLASS) +#define INT_GPIOQ5 INT_CONCAT(INT_GPIOQ5_, INT_DEVICE_CLASS) +#define INT_GPIOQ6 INT_CONCAT(INT_GPIOQ6_, INT_DEVICE_CLASS) +#define INT_GPIOQ7 INT_CONCAT(INT_GPIOQ7_, INT_DEVICE_CLASS) +#define INT_GPIOR INT_CONCAT(INT_GPIOR_, INT_DEVICE_CLASS) +#define INT_GPIOS INT_CONCAT(INT_GPIOS_, INT_DEVICE_CLASS) +#define INT_GPIOT INT_CONCAT(INT_GPIOT_, INT_DEVICE_CLASS) +#define INT_HIBERNATE INT_CONCAT(INT_HIBERNATE_, INT_DEVICE_CLASS) +#define INT_I2C0 INT_CONCAT(INT_I2C0_, INT_DEVICE_CLASS) +#define INT_I2C1 INT_CONCAT(INT_I2C1_, INT_DEVICE_CLASS) +#define INT_I2C2 INT_CONCAT(INT_I2C2_, INT_DEVICE_CLASS) +#define INT_I2C3 INT_CONCAT(INT_I2C3_, INT_DEVICE_CLASS) +#define INT_I2C4 INT_CONCAT(INT_I2C4_, INT_DEVICE_CLASS) +#define INT_I2C5 INT_CONCAT(INT_I2C5_, INT_DEVICE_CLASS) +#define INT_I2C6 INT_CONCAT(INT_I2C6_, INT_DEVICE_CLASS) +#define INT_I2C7 INT_CONCAT(INT_I2C7_, INT_DEVICE_CLASS) +#define INT_I2C8 INT_CONCAT(INT_I2C8_, INT_DEVICE_CLASS) +#define INT_I2C9 INT_CONCAT(INT_I2C9_, INT_DEVICE_CLASS) +#define INT_LCD0 INT_CONCAT(INT_LCD0_, INT_DEVICE_CLASS) +#define INT_ONEWIRE0 INT_CONCAT(INT_ONEWIRE0_, INT_DEVICE_CLASS) +#define INT_PWM0_0 INT_CONCAT(INT_PWM0_0_, INT_DEVICE_CLASS) +#define INT_PWM0_1 INT_CONCAT(INT_PWM0_1_, INT_DEVICE_CLASS) +#define INT_PWM0_2 INT_CONCAT(INT_PWM0_2_, INT_DEVICE_CLASS) +#define INT_PWM0_3 INT_CONCAT(INT_PWM0_3_, INT_DEVICE_CLASS) +#define INT_PWM0_FAULT INT_CONCAT(INT_PWM0_FAULT_, INT_DEVICE_CLASS) +#define INT_PWM1_0 INT_CONCAT(INT_PWM1_0_, INT_DEVICE_CLASS) +#define INT_PWM1_1 INT_CONCAT(INT_PWM1_1_, INT_DEVICE_CLASS) +#define INT_PWM1_2 INT_CONCAT(INT_PWM1_2_, INT_DEVICE_CLASS) +#define INT_PWM1_3 INT_CONCAT(INT_PWM1_3_, INT_DEVICE_CLASS) +#define INT_PWM1_FAULT INT_CONCAT(INT_PWM1_FAULT_, INT_DEVICE_CLASS) +#define INT_QEI0 INT_CONCAT(INT_QEI0_, INT_DEVICE_CLASS) +#define INT_QEI1 INT_CONCAT(INT_QEI1_, INT_DEVICE_CLASS) +#define INT_SHA0 INT_CONCAT(INT_SHA0_, INT_DEVICE_CLASS) +#define INT_SSI0 INT_CONCAT(INT_SSI0_, INT_DEVICE_CLASS) +#define INT_SSI1 INT_CONCAT(INT_SSI1_, INT_DEVICE_CLASS) +#define INT_SSI2 INT_CONCAT(INT_SSI2_, INT_DEVICE_CLASS) +#define INT_SSI3 INT_CONCAT(INT_SSI3_, INT_DEVICE_CLASS) +#define INT_SYSCTL INT_CONCAT(INT_SYSCTL_, INT_DEVICE_CLASS) +#define INT_SYSEXC INT_CONCAT(INT_SYSEXC_, INT_DEVICE_CLASS) +#define INT_TAMPER0 INT_CONCAT(INT_TAMPER0_, INT_DEVICE_CLASS) +#define INT_TIMER0A INT_CONCAT(INT_TIMER0A_, INT_DEVICE_CLASS) +#define INT_TIMER0B INT_CONCAT(INT_TIMER0B_, INT_DEVICE_CLASS) +#define INT_TIMER1A INT_CONCAT(INT_TIMER1A_, INT_DEVICE_CLASS) +#define INT_TIMER1B INT_CONCAT(INT_TIMER1B_, INT_DEVICE_CLASS) +#define INT_TIMER2A INT_CONCAT(INT_TIMER2A_, INT_DEVICE_CLASS) +#define INT_TIMER2B INT_CONCAT(INT_TIMER2B_, INT_DEVICE_CLASS) +#define INT_TIMER3A INT_CONCAT(INT_TIMER3A_, INT_DEVICE_CLASS) +#define INT_TIMER3B INT_CONCAT(INT_TIMER3B_, INT_DEVICE_CLASS) +#define INT_TIMER4A INT_CONCAT(INT_TIMER4A_, INT_DEVICE_CLASS) +#define INT_TIMER4B INT_CONCAT(INT_TIMER4B_, INT_DEVICE_CLASS) +#define INT_TIMER5A INT_CONCAT(INT_TIMER5A_, INT_DEVICE_CLASS) +#define INT_TIMER5B INT_CONCAT(INT_TIMER5B_, INT_DEVICE_CLASS) +#define INT_TIMER6A INT_CONCAT(INT_TIMER6A_, INT_DEVICE_CLASS) +#define INT_TIMER6B INT_CONCAT(INT_TIMER6B_, INT_DEVICE_CLASS) +#define INT_TIMER7A INT_CONCAT(INT_TIMER7A_, INT_DEVICE_CLASS) +#define INT_TIMER7B INT_CONCAT(INT_TIMER7B_, INT_DEVICE_CLASS) +#define INT_UART0 INT_CONCAT(INT_UART0_, INT_DEVICE_CLASS) +#define INT_UART1 INT_CONCAT(INT_UART1_, INT_DEVICE_CLASS) +#define INT_UART2 INT_CONCAT(INT_UART2_, INT_DEVICE_CLASS) +#define INT_UART3 INT_CONCAT(INT_UART3_, INT_DEVICE_CLASS) +#define INT_UART4 INT_CONCAT(INT_UART4_, INT_DEVICE_CLASS) +#define INT_UART5 INT_CONCAT(INT_UART5_, INT_DEVICE_CLASS) +#define INT_UART6 INT_CONCAT(INT_UART6_, INT_DEVICE_CLASS) +#define INT_UART7 INT_CONCAT(INT_UART7_, INT_DEVICE_CLASS) +#define INT_UDMA INT_CONCAT(INT_UDMA_, INT_DEVICE_CLASS) +#define INT_UDMAERR INT_CONCAT(INT_UDMAERR_, INT_DEVICE_CLASS) +#define INT_USB0 INT_CONCAT(INT_USB0_, INT_DEVICE_CLASS) +#define INT_WATCHDOG INT_CONCAT(INT_WATCHDOG_, INT_DEVICE_CLASS) +#define INT_WTIMER0A INT_CONCAT(INT_WTIMER0A_, INT_DEVICE_CLASS) +#define INT_WTIMER0B INT_CONCAT(INT_WTIMER0B_, INT_DEVICE_CLASS) +#define INT_WTIMER1A INT_CONCAT(INT_WTIMER1A_, INT_DEVICE_CLASS) +#define INT_WTIMER1B INT_CONCAT(INT_WTIMER1B_, INT_DEVICE_CLASS) +#define INT_WTIMER2A INT_CONCAT(INT_WTIMER2A_, INT_DEVICE_CLASS) +#define INT_WTIMER2B INT_CONCAT(INT_WTIMER2B_, INT_DEVICE_CLASS) +#define INT_WTIMER3A INT_CONCAT(INT_WTIMER3A_, INT_DEVICE_CLASS) +#define INT_WTIMER3B INT_CONCAT(INT_WTIMER3B_, INT_DEVICE_CLASS) +#define INT_WTIMER4A INT_CONCAT(INT_WTIMER4A_, INT_DEVICE_CLASS) +#define INT_WTIMER4B INT_CONCAT(INT_WTIMER4B_, INT_DEVICE_CLASS) +#define INT_WTIMER5A INT_CONCAT(INT_WTIMER5A_, INT_DEVICE_CLASS) +#define INT_WTIMER5B INT_CONCAT(INT_WTIMER5B_, INT_DEVICE_CLASS) + +//***************************************************************************** +// +// The following are defines for the total number of interrupts. +// +//***************************************************************************** +#define NUM_INTERRUPTS INT_CONCAT(NUM_INTERRUPTS_, INT_DEVICE_CLASS) + +//***************************************************************************** +// +// The following are defines for the total number of priority levels. +// +//***************************************************************************** +#define NUM_PRIORITY 8 +#define NUM_PRIORITY_BITS 3 + +#endif // __HW_INTS_H__ diff --git a/os/common/ext/TivaWare/inc/hw_lcd.h b/os/common/ext/TivaWare/inc/hw_lcd.h new file mode 100644 index 0000000..f8711be --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_lcd.h @@ -0,0 +1,575 @@ +//***************************************************************************** +// +// hw_lcd.h - Defines and macros used when accessing the LCD controller. +// +// Copyright (c) 2011-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_LCD_H__ +#define __HW_LCD_H__ + +//***************************************************************************** +// +// The following are defines for the LCD register offsets. +// +//***************************************************************************** +#define LCD_O_PID 0x00000000 // LCD PID Register Format +#define LCD_O_CTL 0x00000004 // LCD Control +#define LCD_O_LIDDCTL 0x0000000C // LCD LIDD Control +#define LCD_O_LIDDCS0CFG 0x00000010 // LCD LIDD CS0 Configuration +#define LCD_O_LIDDCS0ADDR 0x00000014 // LIDD CS0 Read/Write Address +#define LCD_O_LIDDCS0DATA 0x00000018 // LIDD CS0 Data Read/Write + // Initiation +#define LCD_O_LIDDCS1CFG 0x0000001C // LIDD CS1 Configuration +#define LCD_O_LIDDCS1ADDR 0x00000020 // LIDD CS1 Address Read/Write + // Initiation +#define LCD_O_LIDDCS1DATA 0x00000024 // LIDD CS1 Data Read/Write + // Initiation +#define LCD_O_RASTRCTL 0x00000028 // LCD Raster Control +#define LCD_O_RASTRTIM0 0x0000002C // LCD Raster Timing 0 +#define LCD_O_RASTRTIM1 0x00000030 // LCD Raster Timing 1 +#define LCD_O_RASTRTIM2 0x00000034 // LCD Raster Timing 2 +#define LCD_O_RASTRSUBP1 0x00000038 // LCD Raster Subpanel Display 1 +#define LCD_O_RASTRSUBP2 0x0000003C // LCD Raster Subpanel Display 2 +#define LCD_O_DMACTL 0x00000040 // LCD DMA Control +#define LCD_O_DMABAFB0 0x00000044 // LCD DMA Frame Buffer 0 Base + // Address +#define LCD_O_DMACAFB0 0x00000048 // LCD DMA Frame Buffer 0 Ceiling + // Address +#define LCD_O_DMABAFB1 0x0000004C // LCD DMA Frame Buffer 1 Base + // Address +#define LCD_O_DMACAFB1 0x00000050 // LCD DMA Frame Buffer 1 Ceiling + // Address +#define LCD_O_SYSCFG 0x00000054 // LCD System Configuration + // Register +#define LCD_O_RISSET 0x00000058 // LCD Interrupt Raw Status and Set + // Register +#define LCD_O_MISCLR 0x0000005C // LCD Interrupt Status and Clear +#define LCD_O_IM 0x00000060 // LCD Interrupt Mask +#define LCD_O_IENC 0x00000064 // LCD Interrupt Enable Clear +#define LCD_O_CLKEN 0x0000006C // LCD Clock Enable +#define LCD_O_CLKRESET 0x00000070 // LCD Clock Resets + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_PID register. +// +//***************************************************************************** +#define LCD_PID_MAJOR_M 0x00000700 // Major Release Number +#define LCD_PID_MINOR_M 0x0000003F // Minor Release Number +#define LCD_PID_MAJOR_S 8 +#define LCD_PID_MINOR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_CTL register. +// +//***************************************************************************** +#define LCD_CTL_CLKDIV_M 0x0000FF00 // Clock Divisor +#define LCD_CTL_UFLOWRST 0x00000002 // Underflow Restart +#define LCD_CTL_LCDMODE 0x00000001 // LCD Mode Select +#define LCD_CTL_CLKDIV_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCTL register. +// +//***************************************************************************** +#define LCD_LIDDCTL_DMACS 0x00000200 // CS0/CS1 Select for LIDD DMA + // Writes +#define LCD_LIDDCTL_DMAEN 0x00000100 // LIDD DMA Enable +#define LCD_LIDDCTL_CS1E1 0x00000080 // Chip Select 1 (CS1)/Enable 1(E1) + // Polarity Control +#define LCD_LIDDCTL_CS0E0 0x00000040 // Chip Select 0 (CS0)/Enable 0 + // (E0) Polarity Control +#define LCD_LIDDCTL_WRDIRINV 0x00000020 // Write Strobe (WR) /Direction + // (DIR) Polarity Control +#define LCD_LIDDCTL_RDEN 0x00000010 // Read Strobe (RD) /Direct Enable + // (EN) Polarity Control +#define LCD_LIDDCTL_ALE 0x00000008 // Address Latch Enable (ALE) + // Polarity Control +#define LCD_LIDDCTL_MODE_M 0x00000007 // LIDD Mode Select +#define LCD_LIDDCTL_MODE_SYNCM68 \ + 0x00000000 // Synchronous Motorola 6800 Mode +#define LCD_LIDDCTL_MODE_ASYNCM68 \ + 0x00000001 // Asynchronous Motorola 6800 Mode +#define LCD_LIDDCTL_MODE_SYNCM80 \ + 0x00000002 // Synchronous Intel 8080 mode +#define LCD_LIDDCTL_MODE_ASYNCM80 \ + 0x00000003 // Asynchronous Intel 8080 mode +#define LCD_LIDDCTL_MODE_ASYNCHIT \ + 0x00000004 // Asynchronous Hitachi mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCS0CFG +// register. +// +//***************************************************************************** +#define LCD_LIDDCS0CFG_WRSU_M 0xF8000000 // Write Strobe (WR) Set-Up Cycles +#define LCD_LIDDCS0CFG_WRDUR_M 0x07E00000 // Write Strobe (WR) Duration + // Cycles +#define LCD_LIDDCS0CFG_WRHOLD_M 0x001E0000 // Write Strobe (WR) Hold cycles +#define LCD_LIDDCS0CFG_RDSU_M 0x0001F000 // Read Strobe (RD) Set-Up cycles +#define LCD_LIDDCS0CFG_RDDUR_M 0x00000FC0 // Read Strobe (RD) Duration cycles +#define LCD_LIDDCS0CFG_RDHOLD_M 0x0000003C // Read Strobe (RD) Hold cycles +#define LCD_LIDDCS0CFG_GAP_M 0x00000003 // Field value defines the number + // of LCDMCLK cycles (GAP +1) + // between the end of one CS0 + // (LCDAC) device access and the + // start of another CS0 (LCDAC) + // device access unless the two + // accesses are both reads +#define LCD_LIDDCS0CFG_WRSU_S 27 +#define LCD_LIDDCS0CFG_WRDUR_S 21 +#define LCD_LIDDCS0CFG_WRHOLD_S 17 +#define LCD_LIDDCS0CFG_RDSU_S 12 +#define LCD_LIDDCS0CFG_RDDUR_S 6 +#define LCD_LIDDCS0CFG_RDHOLD_S 2 +#define LCD_LIDDCS0CFG_GAP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCS0ADDR +// register. +// +//***************************************************************************** +#define LCD_LIDDCS0ADDR_CS0ADDR_M \ + 0x0000FFFF // LCD Address +#define LCD_LIDDCS0ADDR_CS0ADDR_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCS0DATA +// register. +// +//***************************************************************************** +#define LCD_LIDDCS0DATA_CS0DATA_M \ + 0x0000FFFF // LCD Data Read/Write +#define LCD_LIDDCS0DATA_CS0DATA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCS1CFG +// register. +// +//***************************************************************************** +#define LCD_LIDDCS1CFG_WRSU_M 0xF8000000 // Write Strobe (WR) Set-Up Cycles +#define LCD_LIDDCS1CFG_WRDUR_M 0x07E00000 // Write Strobe (WR) Duration + // Cycles +#define LCD_LIDDCS1CFG_WRHOLD_M 0x001E0000 // Write Strobe (WR) Hold cycles +#define LCD_LIDDCS1CFG_RDSU_M 0x0001F000 // Read Strobe (RD) Set-Up cycles +#define LCD_LIDDCS1CFG_RDDUR_M 0x00000FC0 // Read Strobe (RD) Duration cycles +#define LCD_LIDDCS1CFG_RDHOLD_M 0x0000003C // Read Strobe (RD) Hold cycles +#define LCD_LIDDCS1CFG_GAP_M 0x00000003 // Field value defines the number + // of LCDMCLK cycles (GAP + 1) + // between the end of one CS1 + // (LCDAC) device access and the + // start of another CS0 (LCDAC) + // device access unless the two + // accesses are both reads +#define LCD_LIDDCS1CFG_WRSU_S 27 +#define LCD_LIDDCS1CFG_WRDUR_S 21 +#define LCD_LIDDCS1CFG_WRHOLD_S 17 +#define LCD_LIDDCS1CFG_RDSU_S 12 +#define LCD_LIDDCS1CFG_RDDUR_S 6 +#define LCD_LIDDCS1CFG_RDHOLD_S 2 +#define LCD_LIDDCS1CFG_GAP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCS1ADDR +// register. +// +//***************************************************************************** +#define LCD_LIDDCS1ADDR_CS1ADDR_M \ + 0x0000FFFF // LCD Address Bus +#define LCD_LIDDCS1ADDR_CS1ADDR_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCS1DATA +// register. +// +//***************************************************************************** +#define LCD_LIDDCS1DATA_CS0DATA_M \ + 0x0000FFFF // LCD Data Read/Write Initiation +#define LCD_LIDDCS1DATA_CS0DATA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RASTRCTL register. +// +//***************************************************************************** +#define LCD_RASTRCTL_TFT24UPCK 0x04000000 // 24-bit TFT Mode Packing +#define LCD_RASTRCTL_TFT24 0x02000000 // 24-Bit TFT Mode +#define LCD_RASTRCTL_FRMBUFSZ 0x01000000 // Frame Buffer Select +#define LCD_RASTRCTL_TFTMAP 0x00800000 // TFT Mode Alternate Signal + // Mapping for Palettized + // Framebuffer +#define LCD_RASTRCTL_NIBMODE 0x00400000 // Nibble Mode +#define LCD_RASTRCTL_PALMODE_M 0x00300000 // Pallette Loading Mode +#define LCD_RASTRCTL_PALMODE_PALDAT \ + 0x00000000 // Palette and data loading, reset + // value +#define LCD_RASTRCTL_PALMODE_PAL \ + 0x00100000 // Palette loading only +#define LCD_RASTRCTL_PALMODE_DAT \ + 0x00200000 // Data loading only +#define LCD_RASTRCTL_REQDLY_M 0x000FF000 // Palette Loading Delay +#define LCD_RASTRCTL_MONO8B 0x00000200 // Mono 8-Bit +#define LCD_RASTRCTL_RDORDER 0x00000100 // Raster Data Order Select +#define LCD_RASTRCTL_LCDTFT 0x00000080 // LCD TFT +#define LCD_RASTRCTL_LCDBW 0x00000002 // LCD Monochrome +#define LCD_RASTRCTL_LCDEN 0x00000001 // LCD Controller Enable for Raster + // Operations +#define LCD_RASTRCTL_REQDLY_S 12 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RASTRTIM0 +// register. +// +//***************************************************************************** +#define LCD_RASTRTIM0_HBP_M 0xFF000000 // Horizontal Back Porch Lowbits +#define LCD_RASTRTIM0_HFP_M 0x00FF0000 // Horizontal Front Porch Lowbits +#define LCD_RASTRTIM0_HSW_M 0x0000FC00 // Horizontal Sync Pulse Width + // Lowbits +#define LCD_RASTRTIM0_PPL_M 0x000003F0 // Pixels-per-line LSB[9:4] +#define LCD_RASTRTIM0_MSBPPL 0x00000008 // Pixels-per-line MSB[10] +#define LCD_RASTRTIM0_HBP_S 24 +#define LCD_RASTRTIM0_HFP_S 16 +#define LCD_RASTRTIM0_HSW_S 10 +#define LCD_RASTRTIM0_PPL_S 4 +#define LCD_RASTRTIM0_MSBPPL_S 3 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RASTRTIM1 +// register. +// +//***************************************************************************** +#define LCD_RASTRTIM1_VBP_M 0xFF000000 // Vertical Back Porch +#define LCD_RASTRTIM1_VFP_M 0x00FF0000 // Vertical Front Porch +#define LCD_RASTRTIM1_VSW_M 0x0000FC00 // Vertical Sync Width Pulse +#define LCD_RASTRTIM1_LPP_M 0x000003FF // Lines Per Panel +#define LCD_RASTRTIM1_VBP_S 24 +#define LCD_RASTRTIM1_VFP_S 16 +#define LCD_RASTRTIM1_VSW_S 10 +#define LCD_RASTRTIM1_LPP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RASTRTIM2 +// register. +// +//***************************************************************************** +#define LCD_RASTRTIM2_HSW_M 0x78000000 // Bits 9:6 of the horizontal sync + // width field +#define LCD_RASTRTIM2_MSBLPP 0x04000000 // MSB of Lines Per Panel +#define LCD_RASTRTIM2_PXLCLKCTL 0x02000000 // Hsync/Vsync Pixel Clock Control + // On/Off +#define LCD_RASTRTIM2_PSYNCRF 0x01000000 // Program HSYNC/VSYNC Rise or Fall +#define LCD_RASTRTIM2_INVOE 0x00800000 // Invert Output Enable +#define LCD_RASTRTIM2_INVPXLCLK 0x00400000 // Invert Pixel Clock +#define LCD_RASTRTIM2_IHS 0x00200000 // Invert Hysync +#define LCD_RASTRTIM2_IVS 0x00100000 // Invert Vsync +#define LCD_RASTRTIM2_ACBI_M 0x000F0000 // AC Bias Pins Transitions per + // Interrupt +#define LCD_RASTRTIM2_ACBF_M 0x0000FF00 // AC Bias Pin Frequency +#define LCD_RASTRTIM2_MSBHBP_M 0x00000030 // Bits 9:8 of the horizontal back + // porch field +#define LCD_RASTRTIM2_MSBHFP_M 0x00000003 // Bits 9:8 of the horizontal front + // porch field +#define LCD_RASTRTIM2_HSW_S 27 +#define LCD_RASTRTIM2_MSBLPP_S 26 +#define LCD_RASTRTIM2_ACBI_S 16 +#define LCD_RASTRTIM2_ACBF_S 8 +#define LCD_RASTRTIM2_MSBHBP_S 4 +#define LCD_RASTRTIM2_MSBHFP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RASTRSUBP1 +// register. +// +//***************************************************************************** +#define LCD_RASTRSUBP1_SPEN 0x80000000 // Sub Panel Enable +#define LCD_RASTRSUBP1_HOLS 0x20000000 // High or Low Signal +#define LCD_RASTRSUBP1_LPPT_M 0x03FF0000 // Line Per Panel Threshold +#define LCD_RASTRSUBP1_DPDLSB_M 0x0000FFFF // Default Pixel Data LSB[15:0] +#define LCD_RASTRSUBP1_LPPT_S 16 +#define LCD_RASTRSUBP1_DPDLSB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RASTRSUBP2 +// register. +// +//***************************************************************************** +#define LCD_RASTRSUBP2_LPPTMSB 0x00000100 // Lines Per Panel Threshold Bit 10 +#define LCD_RASTRSUBP2_DPDMSB_M 0x000000FF // Default Pixel Data MSB [23:16] +#define LCD_RASTRSUBP2_DPDMSB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_DMACTL register. +// +//***************************************************************************** +#define LCD_DMACTL_FIFORDY_M 0x00000700 // DMA FIFO threshold +#define LCD_DMACTL_FIFORDY_8 0x00000000 // 8 words +#define LCD_DMACTL_FIFORDY_16 0x00000100 // 16 words +#define LCD_DMACTL_FIFORDY_32 0x00000200 // 32 words +#define LCD_DMACTL_FIFORDY_64 0x00000300 // 64 words +#define LCD_DMACTL_FIFORDY_128 0x00000400 // 128 words +#define LCD_DMACTL_FIFORDY_256 0x00000500 // 256 words +#define LCD_DMACTL_FIFORDY_512 0x00000600 // 512 words +#define LCD_DMACTL_BURSTSZ_M 0x00000070 // Burst Size setting for DMA + // transfers (all DMA transfers are + // 32 bits wide): +#define LCD_DMACTL_BURSTSZ_4 0x00000020 // burst size of 4 +#define LCD_DMACTL_BURSTSZ_8 0x00000030 // burst size of 8 +#define LCD_DMACTL_BURSTSZ_16 0x00000040 // burst size of 16 +#define LCD_DMACTL_BYTESWAP 0x00000008 // This bit controls the bytelane + // ordering of the data on the + // output of the DMA module +#define LCD_DMACTL_BIGDEND 0x00000002 // Big Endian Enable +#define LCD_DMACTL_FMODE 0x00000001 // Frame Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_DMABAFB0 register. +// +//***************************************************************************** +#define LCD_DMABAFB0_FB0BA_M 0xFFFFFFFC // Frame Buffer 0 Base Address + // pointer +#define LCD_DMABAFB0_FB0BA_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_DMACAFB0 register. +// +//***************************************************************************** +#define LCD_DMACAFB0_FB0CA_M 0xFFFFFFFC // Frame Buffer 0 Ceiling Address + // pointer +#define LCD_DMACAFB0_FB0CA_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_DMABAFB1 register. +// +//***************************************************************************** +#define LCD_DMABAFB1_FB1BA_M 0xFFFFFFFC // Frame Buffer 1 Base Address + // pointer +#define LCD_DMABAFB1_FB1BA_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_DMACAFB1 register. +// +//***************************************************************************** +#define LCD_DMACAFB1_FB1CA_M 0xFFFFFFFC // Frame Buffer 1 Ceiling Address + // pointer +#define LCD_DMACAFB1_FB1CA_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_SYSCFG register. +// +//***************************************************************************** +#define LCD_SYSCFG_STDBY_M 0x00000030 // Standby Mode +#define LCD_SYSCFG_STDBY_FORCE 0x00000000 // Force-standby mode: local + // initiator is unconditionally + // placed in standby state. Backup + // mode, for debug only +#define LCD_SYSCFG_STDBY_NONE 0x00000010 // No-standby mode: local initiator + // is unconditionally placed out of + // standby state. Backup mode, for + // debug only +#define LCD_SYSCFG_STDBY_SMART 0x00000020 // Smart-standby mode: local + // initiator standby status depends + // on local conditions, that is, + // the module's functional + // requirement from the initiator. + // IP module shall not generate + // (initiator-related) wakeup + // events +#define LCD_SYSCFG_IDLEMODE_M 0x0000000C // Idle Mode +#define LCD_SYSCFG_IDLEMODE_FORCE \ + 0x00000000 // Force-idle mode: local target's + // idle state follows + // (acknowledges) the system's idle + // requests unconditionally, that + // is, regardless of the IP + // module's internal requirements. + // Backup mode, for debug only +#define LCD_SYSCFG_IDLEMODE_NONE \ + 0x00000004 // No-idle mode: local target never + // enters idle state. Backup mode, + // for debug only +#define LCD_SYSCFG_IDLEMODE_SMART \ + 0x00000008 // Smart-idle mode: local target's + // idle state eventually follows + // (acknowledges) the system's idle + // requests, depending on the IP + // module's internal requirements. + // IP module shall not generate + // (IRQ- or DMA-requestrelated) + // wakeup events + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RISSET register. +// +//***************************************************************************** +#define LCD_RISSET_EOF1 0x00000200 // DMA End-of-Frame 1 Raw Interrupt + // Status and Set +#define LCD_RISSET_EOF0 0x00000100 // DMA End-of-Frame 0 Raw Interrupt + // Status and Set +#define LCD_RISSET_PALLOAD 0x00000040 // DMA Palette Loaded Raw Interrupt + // Status and Set +#define LCD_RISSET_FIFOU 0x00000020 // DMA FIFO Underflow Raw Interrupt + // Status and Set +#define LCD_RISSET_ACBS 0x00000008 // AC Bias Count Raw Interrupt + // Status and Set +#define LCD_RISSET_SYNCS 0x00000004 // Frame Synchronization Lost Raw + // Interrupt Status and Set +#define LCD_RISSET_RRASTRDONE 0x00000002 // Raster Mode Frame Done interrupt +#define LCD_RISSET_DONE 0x00000001 // Raster or LIDD Frame Done + // (shared, depends on whether + // Raster or LIDD mode enabled) Raw + // Interrupt Status and Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_MISCLR register. +// +//***************************************************************************** +#define LCD_MISCLR_EOF1 0x00000200 // DMA End-of-Frame 1 Enabled + // Interrupt and Clear +#define LCD_MISCLR_EOF0 0x00000100 // DMA End-of-Frame 0 Raw Interrupt + // and Clear +#define LCD_MISCLR_PALLOAD 0x00000040 // DMA Palette Loaded Enabled + // Interrupt and Clear +#define LCD_MISCLR_FIFOU 0x00000020 // DMA FIFO Underflow Enabled + // Interrupt and Clear +#define LCD_MISCLR_ACBS 0x00000008 // AC Bias Count Enabled Interrupt + // and Clear +#define LCD_MISCLR_SYNCS 0x00000004 // Frame Synchronization Lost + // Enabled Interrupt and Clear +#define LCD_MISCLR_RRASTRDONE 0x00000002 // Raster Mode Frame Done interrupt +#define LCD_MISCLR_DONE 0x00000001 // Raster or LIDD Frame Done + // (shared, depends on whether + // Raster or LIDD mode enabled) + // Enabled Interrupt and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_IM register. +// +//***************************************************************************** +#define LCD_IM_EOF1 0x00000200 // DMA End-of-Frame 1 Interrupt + // Enable Set +#define LCD_IM_EOF0 0x00000100 // DMA End-of-Frame 0 Interrupt + // Enable Set +#define LCD_IM_PALLOAD 0x00000040 // DMA Palette Loaded Interrupt + // Enable Set +#define LCD_IM_FIFOU 0x00000020 // DMA FIFO Underflow Interrupt + // Enable Set +#define LCD_IM_ACBS 0x00000008 // AC Bias Count Interrupt Enable + // Set +#define LCD_IM_SYNCS 0x00000004 // Frame Synchronization Lost + // Interrupt Enable Set +#define LCD_IM_RRASTRDONE 0x00000002 // Raster Mode Frame Done Interrupt + // Enable Set +#define LCD_IM_DONE 0x00000001 // Raster or LIDD Frame Done + // (shared, depends on whether + // Raster or LIDD mode enabled) + // Interrupt Enable Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_IENC register. +// +//***************************************************************************** +#define LCD_IENC_EOF1 0x00000200 // DMA End-of-Frame 1 Interrupt + // Enable Clear +#define LCD_IENC_EOF0 0x00000100 // DMA End-of-Frame 0 Interrupt + // Enable Clear +#define LCD_IENC_PALLOAD 0x00000040 // DMA Palette Loaded Interrupt + // Enable Clear +#define LCD_IENC_FIFOU 0x00000020 // DMA FIFO Underflow Interrupt + // Enable Clear +#define LCD_IENC_ACBS 0x00000008 // AC Bias Count Interrupt Enable + // Clear +#define LCD_IENC_SYNCS 0x00000004 // Frame Synchronization Lost + // Interrupt Enable Clear +#define LCD_IENC_RRASTRDONE 0x00000002 // Raster Mode Frame Done Interrupt + // Enable Clear +#define LCD_IENC_DONE 0x00000001 // Raster or LIDD Frame Done + // (shared, depends on whether + // Raster or LIDD mode enabled) + // Interrupt Enable Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_CLKEN register. +// +//***************************************************************************** +#define LCD_CLKEN_DMA 0x00000004 // DMA Clock Enable +#define LCD_CLKEN_LIDD 0x00000002 // LIDD Submodule Clock Enable +#define LCD_CLKEN_CORE 0x00000001 // LCD Core Clock Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_CLKRESET register. +// +//***************************************************************************** +#define LCD_CLKRESET_MAIN 0x00000008 // Software Reset for the entire + // LCD module +#define LCD_CLKRESET_DMA 0x00000004 // Software Reset for the DMA + // submodule +#define LCD_CLKRESET_LIDD 0x00000002 // Software Reset for the LIDD + // submodule (character displays) +#define LCD_CLKRESET_CORE 0x00000001 // Software Reset for the Core, + // which encompasses the Raster + // Active Matrix and Passive Matrix + // logic + +#endif // __HW_LCD_H__ diff --git a/os/common/ext/TivaWare/inc/hw_memmap.h b/os/common/ext/TivaWare/inc/hw_memmap.h new file mode 100644 index 0000000..dafd4f7 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_memmap.h @@ -0,0 +1,151 @@ +//***************************************************************************** +// +// hw_memmap.h - Macros defining the memory map of the device. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_MEMMAP_H__ +#define __HW_MEMMAP_H__ + +//***************************************************************************** +// +// The following are defines for the base address of the memories and +// peripherals. +// +//***************************************************************************** +#define FLASH_BASE 0x00000000 // FLASH memory +#define SRAM_BASE 0x20000000 // SRAM memory +#define WATCHDOG0_BASE 0x40000000 // Watchdog0 +#define WATCHDOG1_BASE 0x40001000 // Watchdog1 +#define GPIO_PORTA_BASE 0x40004000 // GPIO Port A +#define GPIO_PORTB_BASE 0x40005000 // GPIO Port B +#define GPIO_PORTC_BASE 0x40006000 // GPIO Port C +#define GPIO_PORTD_BASE 0x40007000 // GPIO Port D +#define SSI0_BASE 0x40008000 // SSI0 +#define SSI1_BASE 0x40009000 // SSI1 +#define SSI2_BASE 0x4000A000 // SSI2 +#define SSI3_BASE 0x4000B000 // SSI3 +#define UART0_BASE 0x4000C000 // UART0 +#define UART1_BASE 0x4000D000 // UART1 +#define UART2_BASE 0x4000E000 // UART2 +#define UART3_BASE 0x4000F000 // UART3 +#define UART4_BASE 0x40010000 // UART4 +#define UART5_BASE 0x40011000 // UART5 +#define UART6_BASE 0x40012000 // UART6 +#define UART7_BASE 0x40013000 // UART7 +#define I2C0_BASE 0x40020000 // I2C0 +#define I2C1_BASE 0x40021000 // I2C1 +#define I2C2_BASE 0x40022000 // I2C2 +#define I2C3_BASE 0x40023000 // I2C3 +#define GPIO_PORTE_BASE 0x40024000 // GPIO Port E +#define GPIO_PORTF_BASE 0x40025000 // GPIO Port F +#define GPIO_PORTG_BASE 0x40026000 // GPIO Port G +#define GPIO_PORTH_BASE 0x40027000 // GPIO Port H +#define PWM0_BASE 0x40028000 // Pulse Width Modulator (PWM) +#define PWM1_BASE 0x40029000 // Pulse Width Modulator (PWM) +#define QEI0_BASE 0x4002C000 // QEI0 +#define QEI1_BASE 0x4002D000 // QEI1 +#define TIMER0_BASE 0x40030000 // Timer0 +#define TIMER1_BASE 0x40031000 // Timer1 +#define TIMER2_BASE 0x40032000 // Timer2 +#define TIMER3_BASE 0x40033000 // Timer3 +#define TIMER4_BASE 0x40034000 // Timer4 +#define TIMER5_BASE 0x40035000 // Timer5 +#define WTIMER0_BASE 0x40036000 // Wide Timer0 +#define WTIMER1_BASE 0x40037000 // Wide Timer1 +#define ADC0_BASE 0x40038000 // ADC0 +#define ADC1_BASE 0x40039000 // ADC1 +#define COMP_BASE 0x4003C000 // Analog comparators +#define GPIO_PORTJ_BASE 0x4003D000 // GPIO Port J +#define CAN0_BASE 0x40040000 // CAN0 +#define CAN1_BASE 0x40041000 // CAN1 +#define WTIMER2_BASE 0x4004C000 // Wide Timer2 +#define WTIMER3_BASE 0x4004D000 // Wide Timer3 +#define WTIMER4_BASE 0x4004E000 // Wide Timer4 +#define WTIMER5_BASE 0x4004F000 // Wide Timer5 +#define USB0_BASE 0x40050000 // USB 0 Controller +#define GPIO_PORTA_AHB_BASE 0x40058000 // GPIO Port A (high speed) +#define GPIO_PORTB_AHB_BASE 0x40059000 // GPIO Port B (high speed) +#define GPIO_PORTC_AHB_BASE 0x4005A000 // GPIO Port C (high speed) +#define GPIO_PORTD_AHB_BASE 0x4005B000 // GPIO Port D (high speed) +#define GPIO_PORTE_AHB_BASE 0x4005C000 // GPIO Port E (high speed) +#define GPIO_PORTF_AHB_BASE 0x4005D000 // GPIO Port F (high speed) +#define GPIO_PORTG_AHB_BASE 0x4005E000 // GPIO Port G (high speed) +#define GPIO_PORTH_AHB_BASE 0x4005F000 // GPIO Port H (high speed) +#define GPIO_PORTJ_AHB_BASE 0x40060000 // GPIO Port J (high speed) +#define GPIO_PORTK_BASE 0x40061000 // GPIO Port K +#define GPIO_PORTL_BASE 0x40062000 // GPIO Port L +#define GPIO_PORTM_BASE 0x40063000 // GPIO Port M +#define GPIO_PORTN_BASE 0x40064000 // GPIO Port N +#define GPIO_PORTP_BASE 0x40065000 // GPIO Port P +#define GPIO_PORTQ_BASE 0x40066000 // GPIO Port Q +#define GPIO_PORTR_BASE 0x40067000 // General-Purpose Input/Outputs + // (GPIOs) +#define GPIO_PORTS_BASE 0x40068000 // General-Purpose Input/Outputs + // (GPIOs) +#define GPIO_PORTT_BASE 0x40069000 // General-Purpose Input/Outputs + // (GPIOs) +#define EEPROM_BASE 0x400AF000 // EEPROM memory +#define ONEWIRE0_BASE 0x400B6000 // 1-Wire Master Module +#define I2C8_BASE 0x400B8000 // I2C8 +#define I2C9_BASE 0x400B9000 // I2C9 +#define I2C4_BASE 0x400C0000 // I2C4 +#define I2C5_BASE 0x400C1000 // I2C5 +#define I2C6_BASE 0x400C2000 // I2C6 +#define I2C7_BASE 0x400C3000 // I2C7 +#define EPI0_BASE 0x400D0000 // EPI0 +#define TIMER6_BASE 0x400E0000 // General-Purpose Timers +#define TIMER7_BASE 0x400E1000 // General-Purpose Timers +#define EMAC0_BASE 0x400EC000 // Ethernet Controller +#define SYSEXC_BASE 0x400F9000 // System Exception Module +#define HIB_BASE 0x400FC000 // Hibernation Module +#define FLASH_CTRL_BASE 0x400FD000 // FLASH Controller +#define SYSCTL_BASE 0x400FE000 // System Control +#define UDMA_BASE 0x400FF000 // uDMA Controller +#define CCM0_BASE 0x44030000 // Cyclical Redundancy Check (CRC) +#define SHAMD5_BASE 0x44034000 // SHA/MD5 Accelerator +#define AES_BASE 0x44036000 // Advance Encryption + // Hardware-Accelerated Module +#define DES_BASE 0x44038000 // Data Encryption Standard + // Accelerator (DES) +#define LCD0_BASE 0x44050000 // LCD Controller +// #define ITM_BASE 0xE0000000 // Instrumentation Trace Macrocell +// #define DWT_BASE 0xE0001000 // Data Watchpoint and Trace +// #define FPB_BASE 0xE0002000 // FLASH Patch and Breakpoint +// #define NVIC_BASE 0xE000E000 // Nested Vectored Interrupt Ctrl +// #define TPIU_BASE 0xE0040000 // Trace Port Interface Unit + +#endif // __HW_MEMMAP_H__ diff --git a/os/common/ext/TivaWare/inc/hw_nvic.h b/os/common/ext/TivaWare/inc/hw_nvic.h new file mode 100644 index 0000000..c7b3568 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_nvic.h @@ -0,0 +1,1414 @@ +//***************************************************************************** +// +// hw_nvic.h - Macros used when accessing the NVIC hardware. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_NVIC_H__ +#define __HW_NVIC_H__ + +//***************************************************************************** +// +// The following are defines for the NVIC register addresses. +// +//***************************************************************************** +#define NVIC_ACTLR 0xE000E008 // Auxiliary Control +#define NVIC_ST_CTRL 0xE000E010 // SysTick Control and Status + // Register +#define NVIC_ST_RELOAD 0xE000E014 // SysTick Reload Value Register +#define NVIC_ST_CURRENT 0xE000E018 // SysTick Current Value Register +#define NVIC_EN0 0xE000E100 // Interrupt 0-31 Set Enable +#define NVIC_EN1 0xE000E104 // Interrupt 32-63 Set Enable +#define NVIC_EN2 0xE000E108 // Interrupt 64-95 Set Enable +#define NVIC_EN3 0xE000E10C // Interrupt 96-127 Set Enable +#define NVIC_EN4 0xE000E110 // Interrupt 128-159 Set Enable +#define NVIC_DIS0 0xE000E180 // Interrupt 0-31 Clear Enable +#define NVIC_DIS1 0xE000E184 // Interrupt 32-63 Clear Enable +#define NVIC_DIS2 0xE000E188 // Interrupt 64-95 Clear Enable +#define NVIC_DIS3 0xE000E18C // Interrupt 96-127 Clear Enable +#define NVIC_DIS4 0xE000E190 // Interrupt 128-159 Clear Enable +#define NVIC_PEND0 0xE000E200 // Interrupt 0-31 Set Pending +#define NVIC_PEND1 0xE000E204 // Interrupt 32-63 Set Pending +#define NVIC_PEND2 0xE000E208 // Interrupt 64-95 Set Pending +#define NVIC_PEND3 0xE000E20C // Interrupt 96-127 Set Pending +#define NVIC_PEND4 0xE000E210 // Interrupt 128-159 Set Pending +#define NVIC_UNPEND0 0xE000E280 // Interrupt 0-31 Clear Pending +#define NVIC_UNPEND1 0xE000E284 // Interrupt 32-63 Clear Pending +#define NVIC_UNPEND2 0xE000E288 // Interrupt 64-95 Clear Pending +#define NVIC_UNPEND3 0xE000E28C // Interrupt 96-127 Clear Pending +#define NVIC_UNPEND4 0xE000E290 // Interrupt 128-159 Clear Pending +#define NVIC_ACTIVE0 0xE000E300 // Interrupt 0-31 Active Bit +#define NVIC_ACTIVE1 0xE000E304 // Interrupt 32-63 Active Bit +#define NVIC_ACTIVE2 0xE000E308 // Interrupt 64-95 Active Bit +#define NVIC_ACTIVE3 0xE000E30C // Interrupt 96-127 Active Bit +#define NVIC_ACTIVE4 0xE000E310 // Interrupt 128-159 Active Bit +#define NVIC_PRI0 0xE000E400 // Interrupt 0-3 Priority +#define NVIC_PRI1 0xE000E404 // Interrupt 4-7 Priority +#define NVIC_PRI2 0xE000E408 // Interrupt 8-11 Priority +#define NVIC_PRI3 0xE000E40C // Interrupt 12-15 Priority +#define NVIC_PRI4 0xE000E410 // Interrupt 16-19 Priority +#define NVIC_PRI5 0xE000E414 // Interrupt 20-23 Priority +#define NVIC_PRI6 0xE000E418 // Interrupt 24-27 Priority +#define NVIC_PRI7 0xE000E41C // Interrupt 28-31 Priority +#define NVIC_PRI8 0xE000E420 // Interrupt 32-35 Priority +#define NVIC_PRI9 0xE000E424 // Interrupt 36-39 Priority +#define NVIC_PRI10 0xE000E428 // Interrupt 40-43 Priority +#define NVIC_PRI11 0xE000E42C // Interrupt 44-47 Priority +#define NVIC_PRI12 0xE000E430 // Interrupt 48-51 Priority +#define NVIC_PRI13 0xE000E434 // Interrupt 52-55 Priority +#define NVIC_PRI14 0xE000E438 // Interrupt 56-59 Priority +#define NVIC_PRI15 0xE000E43C // Interrupt 60-63 Priority +#define NVIC_PRI16 0xE000E440 // Interrupt 64-67 Priority +#define NVIC_PRI17 0xE000E444 // Interrupt 68-71 Priority +#define NVIC_PRI18 0xE000E448 // Interrupt 72-75 Priority +#define NVIC_PRI19 0xE000E44C // Interrupt 76-79 Priority +#define NVIC_PRI20 0xE000E450 // Interrupt 80-83 Priority +#define NVIC_PRI21 0xE000E454 // Interrupt 84-87 Priority +#define NVIC_PRI22 0xE000E458 // Interrupt 88-91 Priority +#define NVIC_PRI23 0xE000E45C // Interrupt 92-95 Priority +#define NVIC_PRI24 0xE000E460 // Interrupt 96-99 Priority +#define NVIC_PRI25 0xE000E464 // Interrupt 100-103 Priority +#define NVIC_PRI26 0xE000E468 // Interrupt 104-107 Priority +#define NVIC_PRI27 0xE000E46C // Interrupt 108-111 Priority +#define NVIC_PRI28 0xE000E470 // Interrupt 112-115 Priority +#define NVIC_PRI29 0xE000E474 // Interrupt 116-119 Priority +#define NVIC_PRI30 0xE000E478 // Interrupt 120-123 Priority +#define NVIC_PRI31 0xE000E47C // Interrupt 124-127 Priority +#define NVIC_PRI32 0xE000E480 // Interrupt 128-131 Priority +#define NVIC_PRI33 0xE000E484 // Interrupt 132-135 Priority +#define NVIC_PRI34 0xE000E488 // Interrupt 136-139 Priority +#define NVIC_CPUID 0xE000ED00 // CPU ID Base +#define NVIC_INT_CTRL 0xE000ED04 // Interrupt Control and State +#define NVIC_VTABLE 0xE000ED08 // Vector Table Offset +#define NVIC_APINT 0xE000ED0C // Application Interrupt and Reset + // Control +#define NVIC_SYS_CTRL 0xE000ED10 // System Control +#define NVIC_CFG_CTRL 0xE000ED14 // Configuration and Control +#define NVIC_SYS_PRI1 0xE000ED18 // System Handler Priority 1 +#define NVIC_SYS_PRI2 0xE000ED1C // System Handler Priority 2 +#define NVIC_SYS_PRI3 0xE000ED20 // System Handler Priority 3 +#define NVIC_SYS_HND_CTRL 0xE000ED24 // System Handler Control and State +#define NVIC_FAULT_STAT 0xE000ED28 // Configurable Fault Status +#define NVIC_HFAULT_STAT 0xE000ED2C // Hard Fault Status +#define NVIC_DEBUG_STAT 0xE000ED30 // Debug Status Register +#define NVIC_MM_ADDR 0xE000ED34 // Memory Management Fault Address +#define NVIC_FAULT_ADDR 0xE000ED38 // Bus Fault Address +#define NVIC_CPAC 0xE000ED88 // Coprocessor Access Control +#define NVIC_MPU_TYPE 0xE000ED90 // MPU Type +#define NVIC_MPU_CTRL 0xE000ED94 // MPU Control +#define NVIC_MPU_NUMBER 0xE000ED98 // MPU Region Number +#define NVIC_MPU_BASE 0xE000ED9C // MPU Region Base Address +#define NVIC_MPU_ATTR 0xE000EDA0 // MPU Region Attribute and Size +#define NVIC_MPU_BASE1 0xE000EDA4 // MPU Region Base Address Alias 1 +#define NVIC_MPU_ATTR1 0xE000EDA8 // MPU Region Attribute and Size + // Alias 1 +#define NVIC_MPU_BASE2 0xE000EDAC // MPU Region Base Address Alias 2 +#define NVIC_MPU_ATTR2 0xE000EDB0 // MPU Region Attribute and Size + // Alias 2 +#define NVIC_MPU_BASE3 0xE000EDB4 // MPU Region Base Address Alias 3 +#define NVIC_MPU_ATTR3 0xE000EDB8 // MPU Region Attribute and Size + // Alias 3 +#define NVIC_DBG_CTRL 0xE000EDF0 // Debug Control and Status Reg +#define NVIC_DBG_XFER 0xE000EDF4 // Debug Core Reg. Transfer Select +#define NVIC_DBG_DATA 0xE000EDF8 // Debug Core Register Data +#define NVIC_DBG_INT 0xE000EDFC // Debug Reset Interrupt Control +#define NVIC_SW_TRIG 0xE000EF00 // Software Trigger Interrupt +#define NVIC_FPCC 0xE000EF34 // Floating-Point Context Control +#define NVIC_FPCA 0xE000EF38 // Floating-Point Context Address +#define NVIC_FPDSC 0xE000EF3C // Floating-Point Default Status + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTLR register. +// +//***************************************************************************** +#define NVIC_ACTLR_DISOOFP 0x00000200 // Disable Out-Of-Order Floating + // Point +#define NVIC_ACTLR_DISFPCA 0x00000100 // Disable CONTROL +#define NVIC_ACTLR_DISFOLD 0x00000004 // Disable IT Folding +#define NVIC_ACTLR_DISWBUF 0x00000002 // Disable Write Buffer +#define NVIC_ACTLR_DISMCYC 0x00000001 // Disable Interrupts of Multiple + // Cycle Instructions + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_CTRL register. +// +//***************************************************************************** +#define NVIC_ST_CTRL_COUNT 0x00010000 // Count Flag +#define NVIC_ST_CTRL_CLK_SRC 0x00000004 // Clock Source +#define NVIC_ST_CTRL_INTEN 0x00000002 // Interrupt Enable +#define NVIC_ST_CTRL_ENABLE 0x00000001 // Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_RELOAD register. +// +//***************************************************************************** +#define NVIC_ST_RELOAD_M 0x00FFFFFF // Reload Value +#define NVIC_ST_RELOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ST_CURRENT +// register. +// +//***************************************************************************** +#define NVIC_ST_CURRENT_M 0x00FFFFFF // Current Value +#define NVIC_ST_CURRENT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN0 register. +// +//***************************************************************************** +#define NVIC_EN0_INT_M 0xFFFFFFFF // Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN1 register. +// +//***************************************************************************** +#define NVIC_EN1_INT_M 0xFFFFFFFF // Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN2 register. +// +//***************************************************************************** +#define NVIC_EN2_INT_M 0xFFFFFFFF // Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN3 register. +// +//***************************************************************************** +#define NVIC_EN3_INT_M 0xFFFFFFFF // Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_EN4 register. +// +//***************************************************************************** +#define NVIC_EN4_INT_M 0x000007FF // Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS0 register. +// +//***************************************************************************** +#define NVIC_DIS0_INT_M 0xFFFFFFFF // Interrupt Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS1 register. +// +//***************************************************************************** +#define NVIC_DIS1_INT_M 0xFFFFFFFF // Interrupt Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS2 register. +// +//***************************************************************************** +#define NVIC_DIS2_INT_M 0xFFFFFFFF // Interrupt Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS3 register. +// +//***************************************************************************** +#define NVIC_DIS3_INT_M 0xFFFFFFFF // Interrupt Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DIS4 register. +// +//***************************************************************************** +#define NVIC_DIS4_INT_M 0x000007FF // Interrupt Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND0 register. +// +//***************************************************************************** +#define NVIC_PEND0_INT_M 0xFFFFFFFF // Interrupt Set Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND1 register. +// +//***************************************************************************** +#define NVIC_PEND1_INT_M 0xFFFFFFFF // Interrupt Set Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND2 register. +// +//***************************************************************************** +#define NVIC_PEND2_INT_M 0xFFFFFFFF // Interrupt Set Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND3 register. +// +//***************************************************************************** +#define NVIC_PEND3_INT_M 0xFFFFFFFF // Interrupt Set Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PEND4 register. +// +//***************************************************************************** +#define NVIC_PEND4_INT_M 0x000007FF // Interrupt Set Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND0 register. +// +//***************************************************************************** +#define NVIC_UNPEND0_INT_M 0xFFFFFFFF // Interrupt Clear Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND1 register. +// +//***************************************************************************** +#define NVIC_UNPEND1_INT_M 0xFFFFFFFF // Interrupt Clear Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND2 register. +// +//***************************************************************************** +#define NVIC_UNPEND2_INT_M 0xFFFFFFFF // Interrupt Clear Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND3 register. +// +//***************************************************************************** +#define NVIC_UNPEND3_INT_M 0xFFFFFFFF // Interrupt Clear Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_UNPEND4 register. +// +//***************************************************************************** +#define NVIC_UNPEND4_INT_M 0x000007FF // Interrupt Clear Pending + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE0 register. +// +//***************************************************************************** +#define NVIC_ACTIVE0_INT_M 0xFFFFFFFF // Interrupt Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE1 register. +// +//***************************************************************************** +#define NVIC_ACTIVE1_INT_M 0xFFFFFFFF // Interrupt Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE2 register. +// +//***************************************************************************** +#define NVIC_ACTIVE2_INT_M 0xFFFFFFFF // Interrupt Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE3 register. +// +//***************************************************************************** +#define NVIC_ACTIVE3_INT_M 0xFFFFFFFF // Interrupt Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_ACTIVE4 register. +// +//***************************************************************************** +#define NVIC_ACTIVE4_INT_M 0x000007FF // Interrupt Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI0 register. +// +//***************************************************************************** +#define NVIC_PRI0_INT3_M 0xE0000000 // Interrupt 3 Priority Mask +#define NVIC_PRI0_INT2_M 0x00E00000 // Interrupt 2 Priority Mask +#define NVIC_PRI0_INT1_M 0x0000E000 // Interrupt 1 Priority Mask +#define NVIC_PRI0_INT0_M 0x000000E0 // Interrupt 0 Priority Mask +#define NVIC_PRI0_INT3_S 29 +#define NVIC_PRI0_INT2_S 21 +#define NVIC_PRI0_INT1_S 13 +#define NVIC_PRI0_INT0_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI1 register. +// +//***************************************************************************** +#define NVIC_PRI1_INT7_M 0xE0000000 // Interrupt 7 Priority Mask +#define NVIC_PRI1_INT6_M 0x00E00000 // Interrupt 6 Priority Mask +#define NVIC_PRI1_INT5_M 0x0000E000 // Interrupt 5 Priority Mask +#define NVIC_PRI1_INT4_M 0x000000E0 // Interrupt 4 Priority Mask +#define NVIC_PRI1_INT7_S 29 +#define NVIC_PRI1_INT6_S 21 +#define NVIC_PRI1_INT5_S 13 +#define NVIC_PRI1_INT4_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI2 register. +// +//***************************************************************************** +#define NVIC_PRI2_INT11_M 0xE0000000 // Interrupt 11 Priority Mask +#define NVIC_PRI2_INT10_M 0x00E00000 // Interrupt 10 Priority Mask +#define NVIC_PRI2_INT9_M 0x0000E000 // Interrupt 9 Priority Mask +#define NVIC_PRI2_INT8_M 0x000000E0 // Interrupt 8 Priority Mask +#define NVIC_PRI2_INT11_S 29 +#define NVIC_PRI2_INT10_S 21 +#define NVIC_PRI2_INT9_S 13 +#define NVIC_PRI2_INT8_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI3 register. +// +//***************************************************************************** +#define NVIC_PRI3_INT15_M 0xE0000000 // Interrupt 15 Priority Mask +#define NVIC_PRI3_INT14_M 0x00E00000 // Interrupt 14 Priority Mask +#define NVIC_PRI3_INT13_M 0x0000E000 // Interrupt 13 Priority Mask +#define NVIC_PRI3_INT12_M 0x000000E0 // Interrupt 12 Priority Mask +#define NVIC_PRI3_INT15_S 29 +#define NVIC_PRI3_INT14_S 21 +#define NVIC_PRI3_INT13_S 13 +#define NVIC_PRI3_INT12_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI4 register. +// +//***************************************************************************** +#define NVIC_PRI4_INT19_M 0xE0000000 // Interrupt 19 Priority Mask +#define NVIC_PRI4_INT18_M 0x00E00000 // Interrupt 18 Priority Mask +#define NVIC_PRI4_INT17_M 0x0000E000 // Interrupt 17 Priority Mask +#define NVIC_PRI4_INT16_M 0x000000E0 // Interrupt 16 Priority Mask +#define NVIC_PRI4_INT19_S 29 +#define NVIC_PRI4_INT18_S 21 +#define NVIC_PRI4_INT17_S 13 +#define NVIC_PRI4_INT16_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI5 register. +// +//***************************************************************************** +#define NVIC_PRI5_INT23_M 0xE0000000 // Interrupt 23 Priority Mask +#define NVIC_PRI5_INT22_M 0x00E00000 // Interrupt 22 Priority Mask +#define NVIC_PRI5_INT21_M 0x0000E000 // Interrupt 21 Priority Mask +#define NVIC_PRI5_INT20_M 0x000000E0 // Interrupt 20 Priority Mask +#define NVIC_PRI5_INT23_S 29 +#define NVIC_PRI5_INT22_S 21 +#define NVIC_PRI5_INT21_S 13 +#define NVIC_PRI5_INT20_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI6 register. +// +//***************************************************************************** +#define NVIC_PRI6_INT27_M 0xE0000000 // Interrupt 27 Priority Mask +#define NVIC_PRI6_INT26_M 0x00E00000 // Interrupt 26 Priority Mask +#define NVIC_PRI6_INT25_M 0x0000E000 // Interrupt 25 Priority Mask +#define NVIC_PRI6_INT24_M 0x000000E0 // Interrupt 24 Priority Mask +#define NVIC_PRI6_INT27_S 29 +#define NVIC_PRI6_INT26_S 21 +#define NVIC_PRI6_INT25_S 13 +#define NVIC_PRI6_INT24_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI7 register. +// +//***************************************************************************** +#define NVIC_PRI7_INT31_M 0xE0000000 // Interrupt 31 Priority Mask +#define NVIC_PRI7_INT30_M 0x00E00000 // Interrupt 30 Priority Mask +#define NVIC_PRI7_INT29_M 0x0000E000 // Interrupt 29 Priority Mask +#define NVIC_PRI7_INT28_M 0x000000E0 // Interrupt 28 Priority Mask +#define NVIC_PRI7_INT31_S 29 +#define NVIC_PRI7_INT30_S 21 +#define NVIC_PRI7_INT29_S 13 +#define NVIC_PRI7_INT28_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI8 register. +// +//***************************************************************************** +#define NVIC_PRI8_INT35_M 0xE0000000 // Interrupt 35 Priority Mask +#define NVIC_PRI8_INT34_M 0x00E00000 // Interrupt 34 Priority Mask +#define NVIC_PRI8_INT33_M 0x0000E000 // Interrupt 33 Priority Mask +#define NVIC_PRI8_INT32_M 0x000000E0 // Interrupt 32 Priority Mask +#define NVIC_PRI8_INT35_S 29 +#define NVIC_PRI8_INT34_S 21 +#define NVIC_PRI8_INT33_S 13 +#define NVIC_PRI8_INT32_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI9 register. +// +//***************************************************************************** +#define NVIC_PRI9_INT39_M 0xE0000000 // Interrupt 39 Priority Mask +#define NVIC_PRI9_INT38_M 0x00E00000 // Interrupt 38 Priority Mask +#define NVIC_PRI9_INT37_M 0x0000E000 // Interrupt 37 Priority Mask +#define NVIC_PRI9_INT36_M 0x000000E0 // Interrupt 36 Priority Mask +#define NVIC_PRI9_INT39_S 29 +#define NVIC_PRI9_INT38_S 21 +#define NVIC_PRI9_INT37_S 13 +#define NVIC_PRI9_INT36_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI10 register. +// +//***************************************************************************** +#define NVIC_PRI10_INT43_M 0xE0000000 // Interrupt 43 Priority Mask +#define NVIC_PRI10_INT42_M 0x00E00000 // Interrupt 42 Priority Mask +#define NVIC_PRI10_INT41_M 0x0000E000 // Interrupt 41 Priority Mask +#define NVIC_PRI10_INT40_M 0x000000E0 // Interrupt 40 Priority Mask +#define NVIC_PRI10_INT43_S 29 +#define NVIC_PRI10_INT42_S 21 +#define NVIC_PRI10_INT41_S 13 +#define NVIC_PRI10_INT40_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI11 register. +// +//***************************************************************************** +#define NVIC_PRI11_INT47_M 0xE0000000 // Interrupt 47 Priority Mask +#define NVIC_PRI11_INT46_M 0x00E00000 // Interrupt 46 Priority Mask +#define NVIC_PRI11_INT45_M 0x0000E000 // Interrupt 45 Priority Mask +#define NVIC_PRI11_INT44_M 0x000000E0 // Interrupt 44 Priority Mask +#define NVIC_PRI11_INT47_S 29 +#define NVIC_PRI11_INT46_S 21 +#define NVIC_PRI11_INT45_S 13 +#define NVIC_PRI11_INT44_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI12 register. +// +//***************************************************************************** +#define NVIC_PRI12_INT51_M 0xE0000000 // Interrupt 51 Priority Mask +#define NVIC_PRI12_INT50_M 0x00E00000 // Interrupt 50 Priority Mask +#define NVIC_PRI12_INT49_M 0x0000E000 // Interrupt 49 Priority Mask +#define NVIC_PRI12_INT48_M 0x000000E0 // Interrupt 48 Priority Mask +#define NVIC_PRI12_INT51_S 29 +#define NVIC_PRI12_INT50_S 21 +#define NVIC_PRI12_INT49_S 13 +#define NVIC_PRI12_INT48_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI13 register. +// +//***************************************************************************** +#define NVIC_PRI13_INT55_M 0xE0000000 // Interrupt 55 Priority Mask +#define NVIC_PRI13_INT54_M 0x00E00000 // Interrupt 54 Priority Mask +#define NVIC_PRI13_INT53_M 0x0000E000 // Interrupt 53 Priority Mask +#define NVIC_PRI13_INT52_M 0x000000E0 // Interrupt 52 Priority Mask +#define NVIC_PRI13_INT55_S 29 +#define NVIC_PRI13_INT54_S 21 +#define NVIC_PRI13_INT53_S 13 +#define NVIC_PRI13_INT52_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI14 register. +// +//***************************************************************************** +#define NVIC_PRI14_INTD_M 0xE0000000 // Interrupt 59 Priority Mask +#define NVIC_PRI14_INTC_M 0x00E00000 // Interrupt 58 Priority Mask +#define NVIC_PRI14_INTB_M 0x0000E000 // Interrupt 57 Priority Mask +#define NVIC_PRI14_INTA_M 0x000000E0 // Interrupt 56 Priority Mask +#define NVIC_PRI14_INTD_S 29 +#define NVIC_PRI14_INTC_S 21 +#define NVIC_PRI14_INTB_S 13 +#define NVIC_PRI14_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI15 register. +// +//***************************************************************************** +#define NVIC_PRI15_INTD_M 0xE0000000 // Interrupt 63 Priority Mask +#define NVIC_PRI15_INTC_M 0x00E00000 // Interrupt 62 Priority Mask +#define NVIC_PRI15_INTB_M 0x0000E000 // Interrupt 61 Priority Mask +#define NVIC_PRI15_INTA_M 0x000000E0 // Interrupt 60 Priority Mask +#define NVIC_PRI15_INTD_S 29 +#define NVIC_PRI15_INTC_S 21 +#define NVIC_PRI15_INTB_S 13 +#define NVIC_PRI15_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI16 register. +// +//***************************************************************************** +#define NVIC_PRI16_INTD_M 0xE0000000 // Interrupt 67 Priority Mask +#define NVIC_PRI16_INTC_M 0x00E00000 // Interrupt 66 Priority Mask +#define NVIC_PRI16_INTB_M 0x0000E000 // Interrupt 65 Priority Mask +#define NVIC_PRI16_INTA_M 0x000000E0 // Interrupt 64 Priority Mask +#define NVIC_PRI16_INTD_S 29 +#define NVIC_PRI16_INTC_S 21 +#define NVIC_PRI16_INTB_S 13 +#define NVIC_PRI16_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI17 register. +// +//***************************************************************************** +#define NVIC_PRI17_INTD_M 0xE0000000 // Interrupt 71 Priority Mask +#define NVIC_PRI17_INTC_M 0x00E00000 // Interrupt 70 Priority Mask +#define NVIC_PRI17_INTB_M 0x0000E000 // Interrupt 69 Priority Mask +#define NVIC_PRI17_INTA_M 0x000000E0 // Interrupt 68 Priority Mask +#define NVIC_PRI17_INTD_S 29 +#define NVIC_PRI17_INTC_S 21 +#define NVIC_PRI17_INTB_S 13 +#define NVIC_PRI17_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI18 register. +// +//***************************************************************************** +#define NVIC_PRI18_INTD_M 0xE0000000 // Interrupt 75 Priority Mask +#define NVIC_PRI18_INTC_M 0x00E00000 // Interrupt 74 Priority Mask +#define NVIC_PRI18_INTB_M 0x0000E000 // Interrupt 73 Priority Mask +#define NVIC_PRI18_INTA_M 0x000000E0 // Interrupt 72 Priority Mask +#define NVIC_PRI18_INTD_S 29 +#define NVIC_PRI18_INTC_S 21 +#define NVIC_PRI18_INTB_S 13 +#define NVIC_PRI18_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI19 register. +// +//***************************************************************************** +#define NVIC_PRI19_INTD_M 0xE0000000 // Interrupt 79 Priority Mask +#define NVIC_PRI19_INTC_M 0x00E00000 // Interrupt 78 Priority Mask +#define NVIC_PRI19_INTB_M 0x0000E000 // Interrupt 77 Priority Mask +#define NVIC_PRI19_INTA_M 0x000000E0 // Interrupt 76 Priority Mask +#define NVIC_PRI19_INTD_S 29 +#define NVIC_PRI19_INTC_S 21 +#define NVIC_PRI19_INTB_S 13 +#define NVIC_PRI19_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI20 register. +// +//***************************************************************************** +#define NVIC_PRI20_INTD_M 0xE0000000 // Interrupt 83 Priority Mask +#define NVIC_PRI20_INTC_M 0x00E00000 // Interrupt 82 Priority Mask +#define NVIC_PRI20_INTB_M 0x0000E000 // Interrupt 81 Priority Mask +#define NVIC_PRI20_INTA_M 0x000000E0 // Interrupt 80 Priority Mask +#define NVIC_PRI20_INTD_S 29 +#define NVIC_PRI20_INTC_S 21 +#define NVIC_PRI20_INTB_S 13 +#define NVIC_PRI20_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI21 register. +// +//***************************************************************************** +#define NVIC_PRI21_INTD_M 0xE0000000 // Interrupt 87 Priority Mask +#define NVIC_PRI21_INTC_M 0x00E00000 // Interrupt 86 Priority Mask +#define NVIC_PRI21_INTB_M 0x0000E000 // Interrupt 85 Priority Mask +#define NVIC_PRI21_INTA_M 0x000000E0 // Interrupt 84 Priority Mask +#define NVIC_PRI21_INTD_S 29 +#define NVIC_PRI21_INTC_S 21 +#define NVIC_PRI21_INTB_S 13 +#define NVIC_PRI21_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI22 register. +// +//***************************************************************************** +#define NVIC_PRI22_INTD_M 0xE0000000 // Interrupt 91 Priority Mask +#define NVIC_PRI22_INTC_M 0x00E00000 // Interrupt 90 Priority Mask +#define NVIC_PRI22_INTB_M 0x0000E000 // Interrupt 89 Priority Mask +#define NVIC_PRI22_INTA_M 0x000000E0 // Interrupt 88 Priority Mask +#define NVIC_PRI22_INTD_S 29 +#define NVIC_PRI22_INTC_S 21 +#define NVIC_PRI22_INTB_S 13 +#define NVIC_PRI22_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI23 register. +// +//***************************************************************************** +#define NVIC_PRI23_INTD_M 0xE0000000 // Interrupt 95 Priority Mask +#define NVIC_PRI23_INTC_M 0x00E00000 // Interrupt 94 Priority Mask +#define NVIC_PRI23_INTB_M 0x0000E000 // Interrupt 93 Priority Mask +#define NVIC_PRI23_INTA_M 0x000000E0 // Interrupt 92 Priority Mask +#define NVIC_PRI23_INTD_S 29 +#define NVIC_PRI23_INTC_S 21 +#define NVIC_PRI23_INTB_S 13 +#define NVIC_PRI23_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI24 register. +// +//***************************************************************************** +#define NVIC_PRI24_INTD_M 0xE0000000 // Interrupt 99 Priority Mask +#define NVIC_PRI24_INTC_M 0x00E00000 // Interrupt 98 Priority Mask +#define NVIC_PRI24_INTB_M 0x0000E000 // Interrupt 97 Priority Mask +#define NVIC_PRI24_INTA_M 0x000000E0 // Interrupt 96 Priority Mask +#define NVIC_PRI24_INTD_S 29 +#define NVIC_PRI24_INTC_S 21 +#define NVIC_PRI24_INTB_S 13 +#define NVIC_PRI24_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI25 register. +// +//***************************************************************************** +#define NVIC_PRI25_INTD_M 0xE0000000 // Interrupt 103 Priority Mask +#define NVIC_PRI25_INTC_M 0x00E00000 // Interrupt 102 Priority Mask +#define NVIC_PRI25_INTB_M 0x0000E000 // Interrupt 101 Priority Mask +#define NVIC_PRI25_INTA_M 0x000000E0 // Interrupt 100 Priority Mask +#define NVIC_PRI25_INTD_S 29 +#define NVIC_PRI25_INTC_S 21 +#define NVIC_PRI25_INTB_S 13 +#define NVIC_PRI25_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI26 register. +// +//***************************************************************************** +#define NVIC_PRI26_INTD_M 0xE0000000 // Interrupt 107 Priority Mask +#define NVIC_PRI26_INTC_M 0x00E00000 // Interrupt 106 Priority Mask +#define NVIC_PRI26_INTB_M 0x0000E000 // Interrupt 105 Priority Mask +#define NVIC_PRI26_INTA_M 0x000000E0 // Interrupt 104 Priority Mask +#define NVIC_PRI26_INTD_S 29 +#define NVIC_PRI26_INTC_S 21 +#define NVIC_PRI26_INTB_S 13 +#define NVIC_PRI26_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI27 register. +// +//***************************************************************************** +#define NVIC_PRI27_INTD_M 0xE0000000 // Interrupt 111 Priority Mask +#define NVIC_PRI27_INTC_M 0x00E00000 // Interrupt 110 Priority Mask +#define NVIC_PRI27_INTB_M 0x0000E000 // Interrupt 109 Priority Mask +#define NVIC_PRI27_INTA_M 0x000000E0 // Interrupt 108 Priority Mask +#define NVIC_PRI27_INTD_S 29 +#define NVIC_PRI27_INTC_S 21 +#define NVIC_PRI27_INTB_S 13 +#define NVIC_PRI27_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI28 register. +// +//***************************************************************************** +#define NVIC_PRI28_INTD_M 0xE0000000 // Interrupt 115 Priority Mask +#define NVIC_PRI28_INTC_M 0x00E00000 // Interrupt 114 Priority Mask +#define NVIC_PRI28_INTB_M 0x0000E000 // Interrupt 113 Priority Mask +#define NVIC_PRI28_INTA_M 0x000000E0 // Interrupt 112 Priority Mask +#define NVIC_PRI28_INTD_S 29 +#define NVIC_PRI28_INTC_S 21 +#define NVIC_PRI28_INTB_S 13 +#define NVIC_PRI28_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI29 register. +// +//***************************************************************************** +#define NVIC_PRI29_INTD_M 0xE0000000 // Interrupt 119 Priority Mask +#define NVIC_PRI29_INTC_M 0x00E00000 // Interrupt 118 Priority Mask +#define NVIC_PRI29_INTB_M 0x0000E000 // Interrupt 117 Priority Mask +#define NVIC_PRI29_INTA_M 0x000000E0 // Interrupt 116 Priority Mask +#define NVIC_PRI29_INTD_S 29 +#define NVIC_PRI29_INTC_S 21 +#define NVIC_PRI29_INTB_S 13 +#define NVIC_PRI29_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI30 register. +// +//***************************************************************************** +#define NVIC_PRI30_INTD_M 0xE0000000 // Interrupt 123 Priority Mask +#define NVIC_PRI30_INTC_M 0x00E00000 // Interrupt 122 Priority Mask +#define NVIC_PRI30_INTB_M 0x0000E000 // Interrupt 121 Priority Mask +#define NVIC_PRI30_INTA_M 0x000000E0 // Interrupt 120 Priority Mask +#define NVIC_PRI30_INTD_S 29 +#define NVIC_PRI30_INTC_S 21 +#define NVIC_PRI30_INTB_S 13 +#define NVIC_PRI30_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI31 register. +// +//***************************************************************************** +#define NVIC_PRI31_INTD_M 0xE0000000 // Interrupt 127 Priority Mask +#define NVIC_PRI31_INTC_M 0x00E00000 // Interrupt 126 Priority Mask +#define NVIC_PRI31_INTB_M 0x0000E000 // Interrupt 125 Priority Mask +#define NVIC_PRI31_INTA_M 0x000000E0 // Interrupt 124 Priority Mask +#define NVIC_PRI31_INTD_S 29 +#define NVIC_PRI31_INTC_S 21 +#define NVIC_PRI31_INTB_S 13 +#define NVIC_PRI31_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI32 register. +// +//***************************************************************************** +#define NVIC_PRI32_INTD_M 0xE0000000 // Interrupt 131 Priority Mask +#define NVIC_PRI32_INTC_M 0x00E00000 // Interrupt 130 Priority Mask +#define NVIC_PRI32_INTB_M 0x0000E000 // Interrupt 129 Priority Mask +#define NVIC_PRI32_INTA_M 0x000000E0 // Interrupt 128 Priority Mask +#define NVIC_PRI32_INTD_S 29 +#define NVIC_PRI32_INTC_S 21 +#define NVIC_PRI32_INTB_S 13 +#define NVIC_PRI32_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI33 register. +// +//***************************************************************************** +#define NVIC_PRI33_INTD_M 0xE0000000 // Interrupt Priority for Interrupt + // [4n+3] +#define NVIC_PRI33_INTC_M 0x00E00000 // Interrupt Priority for Interrupt + // [4n+2] +#define NVIC_PRI33_INTB_M 0x0000E000 // Interrupt Priority for Interrupt + // [4n+1] +#define NVIC_PRI33_INTA_M 0x000000E0 // Interrupt Priority for Interrupt + // [4n] +#define NVIC_PRI33_INTD_S 29 +#define NVIC_PRI33_INTC_S 21 +#define NVIC_PRI33_INTB_S 13 +#define NVIC_PRI33_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_PRI34 register. +// +//***************************************************************************** +#define NVIC_PRI34_INTD_M 0xE0000000 // Interrupt Priority for Interrupt + // [4n+3] +#define NVIC_PRI34_INTC_M 0x00E00000 // Interrupt Priority for Interrupt + // [4n+2] +#define NVIC_PRI34_INTB_M 0x0000E000 // Interrupt Priority for Interrupt + // [4n+1] +#define NVIC_PRI34_INTA_M 0x000000E0 // Interrupt Priority for Interrupt + // [4n] +#define NVIC_PRI34_INTD_S 29 +#define NVIC_PRI34_INTC_S 21 +#define NVIC_PRI34_INTB_S 13 +#define NVIC_PRI34_INTA_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_CPUID register. +// +//***************************************************************************** +#define NVIC_CPUID_IMP_M 0xFF000000 // Implementer Code +#define NVIC_CPUID_IMP_ARM 0x41000000 // ARM +#define NVIC_CPUID_VAR_M 0x00F00000 // Variant Number +#define NVIC_CPUID_CON_M 0x000F0000 // Constant +#define NVIC_CPUID_PARTNO_M 0x0000FFF0 // Part Number +#define NVIC_CPUID_PARTNO_CM4 0x0000C240 // Cortex-M4 processor +#define NVIC_CPUID_REV_M 0x0000000F // Revision Number + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_INT_CTRL register. +// +//***************************************************************************** +#define NVIC_INT_CTRL_NMI_SET 0x80000000 // NMI Set Pending +#define NVIC_INT_CTRL_PEND_SV 0x10000000 // PendSV Set Pending +#define NVIC_INT_CTRL_UNPEND_SV 0x08000000 // PendSV Clear Pending +#define NVIC_INT_CTRL_PENDSTSET 0x04000000 // SysTick Set Pending +#define NVIC_INT_CTRL_PENDSTCLR 0x02000000 // SysTick Clear Pending +#define NVIC_INT_CTRL_ISR_PRE 0x00800000 // Debug Interrupt Handling +#define NVIC_INT_CTRL_ISR_PEND 0x00400000 // Interrupt Pending +#define NVIC_INT_CTRL_VEC_PEN_M 0x000FF000 // Interrupt Pending Vector Number +#define NVIC_INT_CTRL_VEC_PEN_NMI \ + 0x00002000 // NMI +#define NVIC_INT_CTRL_VEC_PEN_HARD \ + 0x00003000 // Hard fault +#define NVIC_INT_CTRL_VEC_PEN_MEM \ + 0x00004000 // Memory management fault +#define NVIC_INT_CTRL_VEC_PEN_BUS \ + 0x00005000 // Bus fault +#define NVIC_INT_CTRL_VEC_PEN_USG \ + 0x00006000 // Usage fault +#define NVIC_INT_CTRL_VEC_PEN_SVC \ + 0x0000B000 // SVCall +#define NVIC_INT_CTRL_VEC_PEN_PNDSV \ + 0x0000E000 // PendSV +#define NVIC_INT_CTRL_VEC_PEN_TICK \ + 0x0000F000 // SysTick +#define NVIC_INT_CTRL_RET_BASE 0x00000800 // Return to Base +#define NVIC_INT_CTRL_VEC_ACT_M 0x000000FF // Interrupt Pending Vector Number +#define NVIC_INT_CTRL_VEC_ACT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_VTABLE register. +// +//***************************************************************************** +#define NVIC_VTABLE_OFFSET_M 0xFFFFFC00 // Vector Table Offset +#define NVIC_VTABLE_OFFSET_S 10 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_APINT register. +// +//***************************************************************************** +#define NVIC_APINT_VECTKEY_M 0xFFFF0000 // Register Key +#define NVIC_APINT_VECTKEY 0x05FA0000 // Vector key +#define NVIC_APINT_ENDIANESS 0x00008000 // Data Endianess +#define NVIC_APINT_PRIGROUP_M 0x00000700 // Interrupt Priority Grouping +#define NVIC_APINT_PRIGROUP_7_1 0x00000000 // Priority group 7.1 split +#define NVIC_APINT_PRIGROUP_6_2 0x00000100 // Priority group 6.2 split +#define NVIC_APINT_PRIGROUP_5_3 0x00000200 // Priority group 5.3 split +#define NVIC_APINT_PRIGROUP_4_4 0x00000300 // Priority group 4.4 split +#define NVIC_APINT_PRIGROUP_3_5 0x00000400 // Priority group 3.5 split +#define NVIC_APINT_PRIGROUP_2_6 0x00000500 // Priority group 2.6 split +#define NVIC_APINT_PRIGROUP_1_7 0x00000600 // Priority group 1.7 split +#define NVIC_APINT_PRIGROUP_0_8 0x00000700 // Priority group 0.8 split +#define NVIC_APINT_SYSRESETREQ 0x00000004 // System Reset Request +#define NVIC_APINT_VECT_CLR_ACT 0x00000002 // Clear Active NMI / Fault +#define NVIC_APINT_VECT_RESET 0x00000001 // System Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_CTRL register. +// +//***************************************************************************** +#define NVIC_SYS_CTRL_SEVONPEND 0x00000010 // Wake Up on Pending +#define NVIC_SYS_CTRL_SLEEPDEEP 0x00000004 // Deep Sleep Enable +#define NVIC_SYS_CTRL_SLEEPEXIT 0x00000002 // Sleep on ISR Exit + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_CFG_CTRL register. +// +//***************************************************************************** +#define NVIC_CFG_CTRL_STKALIGN 0x00000200 // Stack Alignment on Exception + // Entry +#define NVIC_CFG_CTRL_BFHFNMIGN 0x00000100 // Ignore Bus Fault in NMI and + // Fault +#define NVIC_CFG_CTRL_DIV0 0x00000010 // Trap on Divide by 0 +#define NVIC_CFG_CTRL_UNALIGNED 0x00000008 // Trap on Unaligned Access +#define NVIC_CFG_CTRL_MAIN_PEND 0x00000002 // Allow Main Interrupt Trigger +#define NVIC_CFG_CTRL_BASE_THR 0x00000001 // Thread State Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_PRI1 register. +// +//***************************************************************************** +#define NVIC_SYS_PRI1_USAGE_M 0x00E00000 // Usage Fault Priority +#define NVIC_SYS_PRI1_BUS_M 0x0000E000 // Bus Fault Priority +#define NVIC_SYS_PRI1_MEM_M 0x000000E0 // Memory Management Fault Priority +#define NVIC_SYS_PRI1_USAGE_S 21 +#define NVIC_SYS_PRI1_BUS_S 13 +#define NVIC_SYS_PRI1_MEM_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_PRI2 register. +// +//***************************************************************************** +#define NVIC_SYS_PRI2_SVC_M 0xE0000000 // SVCall Priority +#define NVIC_SYS_PRI2_SVC_S 29 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_PRI3 register. +// +//***************************************************************************** +#define NVIC_SYS_PRI3_TICK_M 0xE0000000 // SysTick Exception Priority +#define NVIC_SYS_PRI3_PENDSV_M 0x00E00000 // PendSV Priority +#define NVIC_SYS_PRI3_DEBUG_M 0x000000E0 // Debug Priority +#define NVIC_SYS_PRI3_TICK_S 29 +#define NVIC_SYS_PRI3_PENDSV_S 21 +#define NVIC_SYS_PRI3_DEBUG_S 5 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SYS_HND_CTRL +// register. +// +//***************************************************************************** +#define NVIC_SYS_HND_CTRL_USAGE 0x00040000 // Usage Fault Enable +#define NVIC_SYS_HND_CTRL_BUS 0x00020000 // Bus Fault Enable +#define NVIC_SYS_HND_CTRL_MEM 0x00010000 // Memory Management Fault Enable +#define NVIC_SYS_HND_CTRL_SVC 0x00008000 // SVC Call Pending +#define NVIC_SYS_HND_CTRL_BUSP 0x00004000 // Bus Fault Pending +#define NVIC_SYS_HND_CTRL_MEMP 0x00002000 // Memory Management Fault Pending +#define NVIC_SYS_HND_CTRL_USAGEP \ + 0x00001000 // Usage Fault Pending +#define NVIC_SYS_HND_CTRL_TICK 0x00000800 // SysTick Exception Active +#define NVIC_SYS_HND_CTRL_PNDSV 0x00000400 // PendSV Exception Active +#define NVIC_SYS_HND_CTRL_MON 0x00000100 // Debug Monitor Active +#define NVIC_SYS_HND_CTRL_SVCA 0x00000080 // SVC Call Active +#define NVIC_SYS_HND_CTRL_USGA 0x00000008 // Usage Fault Active +#define NVIC_SYS_HND_CTRL_BUSA 0x00000002 // Bus Fault Active +#define NVIC_SYS_HND_CTRL_MEMA 0x00000001 // Memory Management Fault Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FAULT_STAT +// register. +// +//***************************************************************************** +#define NVIC_FAULT_STAT_DIV0 0x02000000 // Divide-by-Zero Usage Fault +#define NVIC_FAULT_STAT_UNALIGN 0x01000000 // Unaligned Access Usage Fault +#define NVIC_FAULT_STAT_NOCP 0x00080000 // No Coprocessor Usage Fault +#define NVIC_FAULT_STAT_INVPC 0x00040000 // Invalid PC Load Usage Fault +#define NVIC_FAULT_STAT_INVSTAT 0x00020000 // Invalid State Usage Fault +#define NVIC_FAULT_STAT_UNDEF 0x00010000 // Undefined Instruction Usage + // Fault +#define NVIC_FAULT_STAT_BFARV 0x00008000 // Bus Fault Address Register Valid +#define NVIC_FAULT_STAT_BLSPERR 0x00002000 // Bus Fault on Floating-Point Lazy + // State Preservation +#define NVIC_FAULT_STAT_BSTKE 0x00001000 // Stack Bus Fault +#define NVIC_FAULT_STAT_BUSTKE 0x00000800 // Unstack Bus Fault +#define NVIC_FAULT_STAT_IMPRE 0x00000400 // Imprecise Data Bus Error +#define NVIC_FAULT_STAT_PRECISE 0x00000200 // Precise Data Bus Error +#define NVIC_FAULT_STAT_IBUS 0x00000100 // Instruction Bus Error +#define NVIC_FAULT_STAT_MMARV 0x00000080 // Memory Management Fault Address + // Register Valid +#define NVIC_FAULT_STAT_MLSPERR 0x00000020 // Memory Management Fault on + // Floating-Point Lazy State + // Preservation +#define NVIC_FAULT_STAT_MSTKE 0x00000010 // Stack Access Violation +#define NVIC_FAULT_STAT_MUSTKE 0x00000008 // Unstack Access Violation +#define NVIC_FAULT_STAT_DERR 0x00000002 // Data Access Violation +#define NVIC_FAULT_STAT_IERR 0x00000001 // Instruction Access Violation + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_HFAULT_STAT +// register. +// +//***************************************************************************** +#define NVIC_HFAULT_STAT_DBG 0x80000000 // Debug Event +#define NVIC_HFAULT_STAT_FORCED 0x40000000 // Forced Hard Fault +#define NVIC_HFAULT_STAT_VECT 0x00000002 // Vector Table Read Fault + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DEBUG_STAT +// register. +// +//***************************************************************************** +#define NVIC_DEBUG_STAT_EXTRNL 0x00000010 // EDBGRQ asserted +#define NVIC_DEBUG_STAT_VCATCH 0x00000008 // Vector catch +#define NVIC_DEBUG_STAT_DWTTRAP 0x00000004 // DWT match +#define NVIC_DEBUG_STAT_BKPT 0x00000002 // Breakpoint instruction +#define NVIC_DEBUG_STAT_HALTED 0x00000001 // Halt request + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MM_ADDR register. +// +//***************************************************************************** +#define NVIC_MM_ADDR_M 0xFFFFFFFF // Fault Address +#define NVIC_MM_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FAULT_ADDR +// register. +// +//***************************************************************************** +#define NVIC_FAULT_ADDR_M 0xFFFFFFFF // Fault Address +#define NVIC_FAULT_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_CPAC register. +// +//***************************************************************************** +#define NVIC_CPAC_CP11_M 0x00C00000 // CP11 Coprocessor Access + // Privilege +#define NVIC_CPAC_CP11_DIS 0x00000000 // Access Denied +#define NVIC_CPAC_CP11_PRIV 0x00400000 // Privileged Access Only +#define NVIC_CPAC_CP11_FULL 0x00C00000 // Full Access +#define NVIC_CPAC_CP10_M 0x00300000 // CP10 Coprocessor Access + // Privilege +#define NVIC_CPAC_CP10_DIS 0x00000000 // Access Denied +#define NVIC_CPAC_CP10_PRIV 0x00100000 // Privileged Access Only +#define NVIC_CPAC_CP10_FULL 0x00300000 // Full Access + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_TYPE register. +// +//***************************************************************************** +#define NVIC_MPU_TYPE_IREGION_M 0x00FF0000 // Number of I Regions +#define NVIC_MPU_TYPE_DREGION_M 0x0000FF00 // Number of D Regions +#define NVIC_MPU_TYPE_SEPARATE 0x00000001 // Separate or Unified MPU +#define NVIC_MPU_TYPE_IREGION_S 16 +#define NVIC_MPU_TYPE_DREGION_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_CTRL register. +// +//***************************************************************************** +#define NVIC_MPU_CTRL_PRIVDEFEN 0x00000004 // MPU Default Region +#define NVIC_MPU_CTRL_HFNMIENA 0x00000002 // MPU Enabled During Faults +#define NVIC_MPU_CTRL_ENABLE 0x00000001 // MPU Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_NUMBER +// register. +// +//***************************************************************************** +#define NVIC_MPU_NUMBER_M 0x00000007 // MPU Region to Access +#define NVIC_MPU_NUMBER_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_BASE register. +// +//***************************************************************************** +#define NVIC_MPU_BASE_ADDR_M 0xFFFFFFE0 // Base Address Mask +#define NVIC_MPU_BASE_VALID 0x00000010 // Region Number Valid +#define NVIC_MPU_BASE_REGION_M 0x00000007 // Region Number +#define NVIC_MPU_BASE_ADDR_S 5 +#define NVIC_MPU_BASE_REGION_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_ATTR register. +// +//***************************************************************************** +#define NVIC_MPU_ATTR_XN 0x10000000 // Instruction Access Disable +#define NVIC_MPU_ATTR_AP_M 0x07000000 // Access Privilege +#define NVIC_MPU_ATTR_AP_NO_NO 0x00000000 // prv: no access, usr: no access +#define NVIC_MPU_ATTR_AP_RW_NO 0x01000000 // prv: rw, usr: none +#define NVIC_MPU_ATTR_AP_RW_RO 0x02000000 // prv: rw, usr: read-only +#define NVIC_MPU_ATTR_AP_RW_RW 0x03000000 // prv: rw, usr: rw +#define NVIC_MPU_ATTR_AP_RO_NO 0x05000000 // prv: ro, usr: none +#define NVIC_MPU_ATTR_AP_RO_RO 0x06000000 // prv: ro, usr: ro +#define NVIC_MPU_ATTR_TEX_M 0x00380000 // Type Extension Mask +#define NVIC_MPU_ATTR_SHAREABLE 0x00040000 // Shareable +#define NVIC_MPU_ATTR_CACHEABLE 0x00020000 // Cacheable +#define NVIC_MPU_ATTR_BUFFRABLE 0x00010000 // Bufferable +#define NVIC_MPU_ATTR_SRD_M 0x0000FF00 // Subregion Disable Bits +#define NVIC_MPU_ATTR_SRD_0 0x00000100 // Sub-region 0 disable +#define NVIC_MPU_ATTR_SRD_1 0x00000200 // Sub-region 1 disable +#define NVIC_MPU_ATTR_SRD_2 0x00000400 // Sub-region 2 disable +#define NVIC_MPU_ATTR_SRD_3 0x00000800 // Sub-region 3 disable +#define NVIC_MPU_ATTR_SRD_4 0x00001000 // Sub-region 4 disable +#define NVIC_MPU_ATTR_SRD_5 0x00002000 // Sub-region 5 disable +#define NVIC_MPU_ATTR_SRD_6 0x00004000 // Sub-region 6 disable +#define NVIC_MPU_ATTR_SRD_7 0x00008000 // Sub-region 7 disable +#define NVIC_MPU_ATTR_SIZE_M 0x0000003E // Region Size Mask +#define NVIC_MPU_ATTR_SIZE_32B 0x00000008 // Region size 32 bytes +#define NVIC_MPU_ATTR_SIZE_64B 0x0000000A // Region size 64 bytes +#define NVIC_MPU_ATTR_SIZE_128B 0x0000000C // Region size 128 bytes +#define NVIC_MPU_ATTR_SIZE_256B 0x0000000E // Region size 256 bytes +#define NVIC_MPU_ATTR_SIZE_512B 0x00000010 // Region size 512 bytes +#define NVIC_MPU_ATTR_SIZE_1K 0x00000012 // Region size 1 Kbytes +#define NVIC_MPU_ATTR_SIZE_2K 0x00000014 // Region size 2 Kbytes +#define NVIC_MPU_ATTR_SIZE_4K 0x00000016 // Region size 4 Kbytes +#define NVIC_MPU_ATTR_SIZE_8K 0x00000018 // Region size 8 Kbytes +#define NVIC_MPU_ATTR_SIZE_16K 0x0000001A // Region size 16 Kbytes +#define NVIC_MPU_ATTR_SIZE_32K 0x0000001C // Region size 32 Kbytes +#define NVIC_MPU_ATTR_SIZE_64K 0x0000001E // Region size 64 Kbytes +#define NVIC_MPU_ATTR_SIZE_128K 0x00000020 // Region size 128 Kbytes +#define NVIC_MPU_ATTR_SIZE_256K 0x00000022 // Region size 256 Kbytes +#define NVIC_MPU_ATTR_SIZE_512K 0x00000024 // Region size 512 Kbytes +#define NVIC_MPU_ATTR_SIZE_1M 0x00000026 // Region size 1 Mbytes +#define NVIC_MPU_ATTR_SIZE_2M 0x00000028 // Region size 2 Mbytes +#define NVIC_MPU_ATTR_SIZE_4M 0x0000002A // Region size 4 Mbytes +#define NVIC_MPU_ATTR_SIZE_8M 0x0000002C // Region size 8 Mbytes +#define NVIC_MPU_ATTR_SIZE_16M 0x0000002E // Region size 16 Mbytes +#define NVIC_MPU_ATTR_SIZE_32M 0x00000030 // Region size 32 Mbytes +#define NVIC_MPU_ATTR_SIZE_64M 0x00000032 // Region size 64 Mbytes +#define NVIC_MPU_ATTR_SIZE_128M 0x00000034 // Region size 128 Mbytes +#define NVIC_MPU_ATTR_SIZE_256M 0x00000036 // Region size 256 Mbytes +#define NVIC_MPU_ATTR_SIZE_512M 0x00000038 // Region size 512 Mbytes +#define NVIC_MPU_ATTR_SIZE_1G 0x0000003A // Region size 1 Gbytes +#define NVIC_MPU_ATTR_SIZE_2G 0x0000003C // Region size 2 Gbytes +#define NVIC_MPU_ATTR_SIZE_4G 0x0000003E // Region size 4 Gbytes +#define NVIC_MPU_ATTR_ENABLE 0x00000001 // Region Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_BASE1 register. +// +//***************************************************************************** +#define NVIC_MPU_BASE1_ADDR_M 0xFFFFFFE0 // Base Address Mask +#define NVIC_MPU_BASE1_VALID 0x00000010 // Region Number Valid +#define NVIC_MPU_BASE1_REGION_M 0x00000007 // Region Number +#define NVIC_MPU_BASE1_ADDR_S 5 +#define NVIC_MPU_BASE1_REGION_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_ATTR1 register. +// +//***************************************************************************** +#define NVIC_MPU_ATTR1_XN 0x10000000 // Instruction Access Disable +#define NVIC_MPU_ATTR1_AP_M 0x07000000 // Access Privilege +#define NVIC_MPU_ATTR1_TEX_M 0x00380000 // Type Extension Mask +#define NVIC_MPU_ATTR1_SHAREABLE \ + 0x00040000 // Shareable +#define NVIC_MPU_ATTR1_CACHEABLE \ + 0x00020000 // Cacheable +#define NVIC_MPU_ATTR1_BUFFRABLE \ + 0x00010000 // Bufferable +#define NVIC_MPU_ATTR1_SRD_M 0x0000FF00 // Subregion Disable Bits +#define NVIC_MPU_ATTR1_SIZE_M 0x0000003E // Region Size Mask +#define NVIC_MPU_ATTR1_ENABLE 0x00000001 // Region Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_BASE2 register. +// +//***************************************************************************** +#define NVIC_MPU_BASE2_ADDR_M 0xFFFFFFE0 // Base Address Mask +#define NVIC_MPU_BASE2_VALID 0x00000010 // Region Number Valid +#define NVIC_MPU_BASE2_REGION_M 0x00000007 // Region Number +#define NVIC_MPU_BASE2_ADDR_S 5 +#define NVIC_MPU_BASE2_REGION_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_ATTR2 register. +// +//***************************************************************************** +#define NVIC_MPU_ATTR2_XN 0x10000000 // Instruction Access Disable +#define NVIC_MPU_ATTR2_AP_M 0x07000000 // Access Privilege +#define NVIC_MPU_ATTR2_TEX_M 0x00380000 // Type Extension Mask +#define NVIC_MPU_ATTR2_SHAREABLE \ + 0x00040000 // Shareable +#define NVIC_MPU_ATTR2_CACHEABLE \ + 0x00020000 // Cacheable +#define NVIC_MPU_ATTR2_BUFFRABLE \ + 0x00010000 // Bufferable +#define NVIC_MPU_ATTR2_SRD_M 0x0000FF00 // Subregion Disable Bits +#define NVIC_MPU_ATTR2_SIZE_M 0x0000003E // Region Size Mask +#define NVIC_MPU_ATTR2_ENABLE 0x00000001 // Region Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_BASE3 register. +// +//***************************************************************************** +#define NVIC_MPU_BASE3_ADDR_M 0xFFFFFFE0 // Base Address Mask +#define NVIC_MPU_BASE3_VALID 0x00000010 // Region Number Valid +#define NVIC_MPU_BASE3_REGION_M 0x00000007 // Region Number +#define NVIC_MPU_BASE3_ADDR_S 5 +#define NVIC_MPU_BASE3_REGION_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_MPU_ATTR3 register. +// +//***************************************************************************** +#define NVIC_MPU_ATTR3_XN 0x10000000 // Instruction Access Disable +#define NVIC_MPU_ATTR3_AP_M 0x07000000 // Access Privilege +#define NVIC_MPU_ATTR3_TEX_M 0x00380000 // Type Extension Mask +#define NVIC_MPU_ATTR3_SHAREABLE \ + 0x00040000 // Shareable +#define NVIC_MPU_ATTR3_CACHEABLE \ + 0x00020000 // Cacheable +#define NVIC_MPU_ATTR3_BUFFRABLE \ + 0x00010000 // Bufferable +#define NVIC_MPU_ATTR3_SRD_M 0x0000FF00 // Subregion Disable Bits +#define NVIC_MPU_ATTR3_SIZE_M 0x0000003E // Region Size Mask +#define NVIC_MPU_ATTR3_ENABLE 0x00000001 // Region Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_CTRL register. +// +//***************************************************************************** +#define NVIC_DBG_CTRL_DBGKEY_M 0xFFFF0000 // Debug key mask +#define NVIC_DBG_CTRL_DBGKEY 0xA05F0000 // Debug key +#define NVIC_DBG_CTRL_S_RESET_ST \ + 0x02000000 // Core has reset since last read +#define NVIC_DBG_CTRL_S_RETIRE_ST \ + 0x01000000 // Core has executed insruction + // since last read +#define NVIC_DBG_CTRL_S_LOCKUP 0x00080000 // Core is locked up +#define NVIC_DBG_CTRL_S_SLEEP 0x00040000 // Core is sleeping +#define NVIC_DBG_CTRL_S_HALT 0x00020000 // Core status on halt +#define NVIC_DBG_CTRL_S_REGRDY 0x00010000 // Register read/write available +#define NVIC_DBG_CTRL_C_SNAPSTALL \ + 0x00000020 // Breaks a stalled load/store +#define NVIC_DBG_CTRL_C_MASKINT 0x00000008 // Mask interrupts when stepping +#define NVIC_DBG_CTRL_C_STEP 0x00000004 // Step the core +#define NVIC_DBG_CTRL_C_HALT 0x00000002 // Halt the core +#define NVIC_DBG_CTRL_C_DEBUGEN 0x00000001 // Enable debug + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_XFER register. +// +//***************************************************************************** +#define NVIC_DBG_XFER_REG_WNR 0x00010000 // Write or not read +#define NVIC_DBG_XFER_REG_SEL_M 0x0000001F // Register +#define NVIC_DBG_XFER_REG_R0 0x00000000 // Register R0 +#define NVIC_DBG_XFER_REG_R1 0x00000001 // Register R1 +#define NVIC_DBG_XFER_REG_R2 0x00000002 // Register R2 +#define NVIC_DBG_XFER_REG_R3 0x00000003 // Register R3 +#define NVIC_DBG_XFER_REG_R4 0x00000004 // Register R4 +#define NVIC_DBG_XFER_REG_R5 0x00000005 // Register R5 +#define NVIC_DBG_XFER_REG_R6 0x00000006 // Register R6 +#define NVIC_DBG_XFER_REG_R7 0x00000007 // Register R7 +#define NVIC_DBG_XFER_REG_R8 0x00000008 // Register R8 +#define NVIC_DBG_XFER_REG_R9 0x00000009 // Register R9 +#define NVIC_DBG_XFER_REG_R10 0x0000000A // Register R10 +#define NVIC_DBG_XFER_REG_R11 0x0000000B // Register R11 +#define NVIC_DBG_XFER_REG_R12 0x0000000C // Register R12 +#define NVIC_DBG_XFER_REG_R13 0x0000000D // Register R13 +#define NVIC_DBG_XFER_REG_R14 0x0000000E // Register R14 +#define NVIC_DBG_XFER_REG_R15 0x0000000F // Register R15 +#define NVIC_DBG_XFER_REG_FLAGS 0x00000010 // xPSR/Flags register +#define NVIC_DBG_XFER_REG_MSP 0x00000011 // Main SP +#define NVIC_DBG_XFER_REG_PSP 0x00000012 // Process SP +#define NVIC_DBG_XFER_REG_DSP 0x00000013 // Deep SP +#define NVIC_DBG_XFER_REG_CFBP 0x00000014 // Control/Fault/BasePri/PriMask + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_DATA register. +// +//***************************************************************************** +#define NVIC_DBG_DATA_M 0xFFFFFFFF // Data temporary cache +#define NVIC_DBG_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_DBG_INT register. +// +//***************************************************************************** +#define NVIC_DBG_INT_HARDERR 0x00000400 // Debug trap on hard fault +#define NVIC_DBG_INT_INTERR 0x00000200 // Debug trap on interrupt errors +#define NVIC_DBG_INT_BUSERR 0x00000100 // Debug trap on bus error +#define NVIC_DBG_INT_STATERR 0x00000080 // Debug trap on usage fault state +#define NVIC_DBG_INT_CHKERR 0x00000040 // Debug trap on usage fault check +#define NVIC_DBG_INT_NOCPERR 0x00000020 // Debug trap on coprocessor error +#define NVIC_DBG_INT_MMERR 0x00000010 // Debug trap on mem manage fault +#define NVIC_DBG_INT_RESET 0x00000008 // Core reset status +#define NVIC_DBG_INT_RSTPENDCLR 0x00000004 // Clear pending core reset +#define NVIC_DBG_INT_RSTPENDING 0x00000002 // Core reset is pending +#define NVIC_DBG_INT_RSTVCATCH 0x00000001 // Reset vector catch + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_SW_TRIG register. +// +//***************************************************************************** +#define NVIC_SW_TRIG_INTID_M 0x000000FF // Interrupt ID +#define NVIC_SW_TRIG_INTID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FPCC register. +// +//***************************************************************************** +#define NVIC_FPCC_ASPEN 0x80000000 // Automatic State Preservation + // Enable +#define NVIC_FPCC_LSPEN 0x40000000 // Lazy State Preservation Enable +#define NVIC_FPCC_MONRDY 0x00000100 // Monitor Ready +#define NVIC_FPCC_BFRDY 0x00000040 // Bus Fault Ready +#define NVIC_FPCC_MMRDY 0x00000020 // Memory Management Fault Ready +#define NVIC_FPCC_HFRDY 0x00000010 // Hard Fault Ready +#define NVIC_FPCC_THREAD 0x00000008 // Thread Mode +#define NVIC_FPCC_USER 0x00000002 // User Privilege Level +#define NVIC_FPCC_LSPACT 0x00000001 // Lazy State Preservation Active + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FPCA register. +// +//***************************************************************************** +#define NVIC_FPCA_ADDRESS_M 0xFFFFFFF8 // Address +#define NVIC_FPCA_ADDRESS_S 3 + +//***************************************************************************** +// +// The following are defines for the bit fields in the NVIC_FPDSC register. +// +//***************************************************************************** +#define NVIC_FPDSC_AHP 0x04000000 // AHP Bit Default +#define NVIC_FPDSC_DN 0x02000000 // DN Bit Default +#define NVIC_FPDSC_FZ 0x01000000 // FZ Bit Default +#define NVIC_FPDSC_RMODE_M 0x00C00000 // RMODE Bit Default +#define NVIC_FPDSC_RMODE_RN 0x00000000 // Round to Nearest (RN) mode +#define NVIC_FPDSC_RMODE_RP 0x00400000 // Round towards Plus Infinity (RP) + // mode +#define NVIC_FPDSC_RMODE_RM 0x00800000 // Round towards Minus Infinity + // (RM) mode +#define NVIC_FPDSC_RMODE_RZ 0x00C00000 // Round towards Zero (RZ) mode + +#endif // __HW_NVIC_H__ diff --git a/os/common/ext/TivaWare/inc/hw_onewire.h b/os/common/ext/TivaWare/inc/hw_onewire.h new file mode 100644 index 0000000..8910a7d --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_onewire.h @@ -0,0 +1,223 @@ +//***************************************************************************** +// +// hw_onewire.h - Macros used when accessing the One wire hardware. +// +// Copyright (c) 2012-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_ONEWIRE_H__ +#define __HW_ONEWIRE_H__ + +//***************************************************************************** +// +// The following are defines for the One wire register offsets. +// +//***************************************************************************** +#define ONEWIRE_O_CS 0x00000000 // 1-Wire Control and Status +#define ONEWIRE_O_TIM 0x00000004 // 1-Wire Timing Override +#define ONEWIRE_O_DATW 0x00000008 // 1-Wire Data Write +#define ONEWIRE_O_DATR 0x0000000C // 1-Wire Data Read +#define ONEWIRE_O_IM 0x00000100 // 1-Wire Interrupt Mask +#define ONEWIRE_O_RIS 0x00000104 // 1-Wire Raw Interrupt Status +#define ONEWIRE_O_MIS 0x00000108 // 1-Wire Masked Interrupt Status +#define ONEWIRE_O_ICR 0x0000010C // 1-Wire Interrupt Clear +#define ONEWIRE_O_DMA 0x00000120 // 1-Wire uDMA Control +#define ONEWIRE_O_PP 0x00000FC0 // 1-Wire Peripheral Properties + +//***************************************************************************** +// +// The following are defines for the bit fields in the ONEWIRE_O_CS register. +// +//***************************************************************************** +#define ONEWIRE_CS_USEALT 0x80000000 // Two Wire Enable +#define ONEWIRE_CS_ALTP 0x40000000 // Alternate Polarity Enable +#define ONEWIRE_CS_BSIZE_M 0x00070000 // Last Byte Size +#define ONEWIRE_CS_BSIZE_8 0x00000000 // 8 bits (1 byte) +#define ONEWIRE_CS_BSIZE_1 0x00010000 // 1 bit +#define ONEWIRE_CS_BSIZE_2 0x00020000 // 2 bits +#define ONEWIRE_CS_BSIZE_3 0x00030000 // 3 bits +#define ONEWIRE_CS_BSIZE_4 0x00040000 // 4 bits +#define ONEWIRE_CS_BSIZE_5 0x00050000 // 5 bits +#define ONEWIRE_CS_BSIZE_6 0x00060000 // 6 bits +#define ONEWIRE_CS_BSIZE_7 0x00070000 // 7 bits +#define ONEWIRE_CS_STUCK 0x00000400 // STUCK Status +#define ONEWIRE_CS_NOATR 0x00000200 // Answer-to-Reset Status +#define ONEWIRE_CS_BUSY 0x00000100 // Busy Status +#define ONEWIRE_CS_SKATR 0x00000080 // Skip Answer-to-Reset Enable +#define ONEWIRE_CS_LSAM 0x00000040 // Late Sample Enable +#define ONEWIRE_CS_ODRV 0x00000020 // Overdrive Enable +#define ONEWIRE_CS_SZ_M 0x00000018 // Data Operation Size +#define ONEWIRE_CS_OP_M 0x00000006 // Operation Request +#define ONEWIRE_CS_OP_NONE 0x00000000 // No operation +#define ONEWIRE_CS_OP_RD 0x00000002 // Read +#define ONEWIRE_CS_OP_WR 0x00000004 // Write +#define ONEWIRE_CS_OP_WRRD 0x00000006 // Write/Read +#define ONEWIRE_CS_RST 0x00000001 // Reset Request +#define ONEWIRE_CS_SZ_S 3 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ONEWIRE_O_TIM register. +// +//***************************************************************************** +#define ONEWIRE_TIM_W1TIM_M 0xF0000000 // Value '1' Timing +#define ONEWIRE_TIM_W0TIM_M 0x0F800000 // Value '0' Timing +#define ONEWIRE_TIM_W0REST_M 0x00780000 // Rest Time +#define ONEWIRE_TIM_W1SAM_M 0x00078000 // Sample Time +#define ONEWIRE_TIM_ATRSAM_M 0x00007800 // Answer-to-Reset Sample +#define ONEWIRE_TIM_ATRTIM_M 0x000007C0 // Answer-to-Reset/Rest Period +#define ONEWIRE_TIM_RSTTIM_M 0x0000003F // Reset Low Time +#define ONEWIRE_TIM_W1TIM_S 28 +#define ONEWIRE_TIM_W0TIM_S 23 +#define ONEWIRE_TIM_W0REST_S 19 +#define ONEWIRE_TIM_W1SAM_S 15 +#define ONEWIRE_TIM_ATRSAM_S 11 +#define ONEWIRE_TIM_ATRTIM_S 6 +#define ONEWIRE_TIM_RSTTIM_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ONEWIRE_O_DATW register. +// +//***************************************************************************** +#define ONEWIRE_DATW_B3_M 0xFF000000 // Upper Data Byte +#define ONEWIRE_DATW_B2_M 0x00FF0000 // Upper Middle Data Byte +#define ONEWIRE_DATW_B1_M 0x0000FF00 // Lower Middle Data Byte +#define ONEWIRE_DATW_B0_M 0x000000FF // Lowest Data Byte +#define ONEWIRE_DATW_B3_S 24 +#define ONEWIRE_DATW_B2_S 16 +#define ONEWIRE_DATW_B1_S 8 +#define ONEWIRE_DATW_B0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ONEWIRE_O_DATR register. +// +//***************************************************************************** +#define ONEWIRE_DATR_B3_M 0xFF000000 // Upper Data Byte +#define ONEWIRE_DATR_B2_M 0x00FF0000 // Upper Middle Data Byte +#define ONEWIRE_DATR_B1_M 0x0000FF00 // Lower Middle Data Byte +#define ONEWIRE_DATR_B0_M 0x000000FF // Lowest Data Byte +#define ONEWIRE_DATR_B3_S 24 +#define ONEWIRE_DATR_B2_S 16 +#define ONEWIRE_DATR_B1_S 8 +#define ONEWIRE_DATR_B0_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the ONEWIRE_O_IM register. +// +//***************************************************************************** +#define ONEWIRE_IM_DMA 0x00000010 // DMA Done Interrupt Mask +#define ONEWIRE_IM_STUCK 0x00000008 // Stuck Status Interrupt Mask +#define ONEWIRE_IM_NOATR 0x00000004 // No Answer-to-Reset Interrupt + // Mask +#define ONEWIRE_IM_OPC 0x00000002 // Operation Complete Interrupt + // Mask +#define ONEWIRE_IM_RST 0x00000001 // Reset Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the ONEWIRE_O_RIS register. +// +//***************************************************************************** +#define ONEWIRE_RIS_DMA 0x00000010 // DMA Done Raw Interrupt Status +#define ONEWIRE_RIS_STUCK 0x00000008 // Stuck Status Raw Interrupt + // Status +#define ONEWIRE_RIS_NOATR 0x00000004 // No Answer-to-Reset Raw Interrupt + // Status +#define ONEWIRE_RIS_OPC 0x00000002 // Operation Complete Raw Interrupt + // Status +#define ONEWIRE_RIS_RST 0x00000001 // Reset Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the ONEWIRE_O_MIS register. +// +//***************************************************************************** +#define ONEWIRE_MIS_DMA 0x00000010 // DMA Done Masked Interrupt Status +#define ONEWIRE_MIS_STUCK 0x00000008 // Stuck Status Masked Interrupt + // Status +#define ONEWIRE_MIS_NOATR 0x00000004 // No Answer-to-Reset Masked + // Interrupt Status +#define ONEWIRE_MIS_OPC 0x00000002 // Operation Complete Masked + // Interrupt Status +#define ONEWIRE_MIS_RST 0x00000001 // Reset Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the ONEWIRE_O_ICR register. +// +//***************************************************************************** +#define ONEWIRE_ICR_DMA 0x00000010 // DMA Done Interrupt Clear +#define ONEWIRE_ICR_STUCK 0x00000008 // Stuck Status Interrupt Clear +#define ONEWIRE_ICR_NOATR 0x00000004 // No Answer-to-Reset Interrupt + // Clear +#define ONEWIRE_ICR_OPC 0x00000002 // Operation Complete Interrupt + // Clear +#define ONEWIRE_ICR_RST 0x00000001 // Reset Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the ONEWIRE_O_DMA register. +// +//***************************************************************************** +#define ONEWIRE_DMA_SG 0x00000008 // Scatter-Gather Enable +#define ONEWIRE_DMA_DMAOP_M 0x00000006 // uDMA Operation +#define ONEWIRE_DMA_DMAOP_DIS 0x00000000 // uDMA disabled +#define ONEWIRE_DMA_DMAOP_RDSNG 0x00000002 // uDMA single read: 1-Wire + // requests uDMA to read + // ONEWIREDATR register after each + // read transaction +#define ONEWIRE_DMA_DMAOP_WRMUL 0x00000004 // uDMA multiple write: 1-Wire + // requests uDMA to load whenever + // the ONEWIREDATW register is + // empty +#define ONEWIRE_DMA_DMAOP_RDMUL 0x00000006 // uDMA multiple read: An initial + // read occurs and subsequent reads + // start after uDMA has read the + // ONEWIREDATR register +#define ONEWIRE_DMA_RST 0x00000001 // uDMA Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the ONEWIRE_O_PP register. +// +//***************************************************************************** +#define ONEWIRE_PP_DMAP 0x00000010 // uDMA Present +#define ONEWIRE_PP_CNT_M 0x00000003 // 1-Wire Bus Count +#define ONEWIRE_PP_CNT_S 0 + +#endif // __HW_ONEWIRE_H__ diff --git a/os/common/ext/TivaWare/inc/hw_pwm.h b/os/common/ext/TivaWare/inc/hw_pwm.h new file mode 100644 index 0000000..00d42bf --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_pwm.h @@ -0,0 +1,1885 @@ +//***************************************************************************** +// +// hw_pwm.h - Defines and Macros for Pulse Width Modulation (PWM) ports. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_PWM_H__ +#define __HW_PWM_H__ + +//***************************************************************************** +// +// The following are defines for the PWM register offsets. +// +//***************************************************************************** +#define PWM_O_CTL 0x00000000 // PWM Master Control +#define PWM_O_SYNC 0x00000004 // PWM Time Base Sync +#define PWM_O_ENABLE 0x00000008 // PWM Output Enable +#define PWM_O_INVERT 0x0000000C // PWM Output Inversion +#define PWM_O_FAULT 0x00000010 // PWM Output Fault +#define PWM_O_INTEN 0x00000014 // PWM Interrupt Enable +#define PWM_O_RIS 0x00000018 // PWM Raw Interrupt Status +#define PWM_O_ISC 0x0000001C // PWM Interrupt Status and Clear +#define PWM_O_STATUS 0x00000020 // PWM Status +#define PWM_O_FAULTVAL 0x00000024 // PWM Fault Condition Value +#define PWM_O_ENUPD 0x00000028 // PWM Enable Update +#define PWM_O_0_CTL 0x00000040 // PWM0 Control +#define PWM_O_0_INTEN 0x00000044 // PWM0 Interrupt and Trigger + // Enable +#define PWM_O_0_RIS 0x00000048 // PWM0 Raw Interrupt Status +#define PWM_O_0_ISC 0x0000004C // PWM0 Interrupt Status and Clear +#define PWM_O_0_LOAD 0x00000050 // PWM0 Load +#define PWM_O_0_COUNT 0x00000054 // PWM0 Counter +#define PWM_O_0_CMPA 0x00000058 // PWM0 Compare A +#define PWM_O_0_CMPB 0x0000005C // PWM0 Compare B +#define PWM_O_0_GENA 0x00000060 // PWM0 Generator A Control +#define PWM_O_0_GENB 0x00000064 // PWM0 Generator B Control +#define PWM_O_0_DBCTL 0x00000068 // PWM0 Dead-Band Control +#define PWM_O_0_DBRISE 0x0000006C // PWM0 Dead-Band Rising-Edge Delay +#define PWM_O_0_DBFALL 0x00000070 // PWM0 Dead-Band + // Falling-Edge-Delay +#define PWM_O_0_FLTSRC0 0x00000074 // PWM0 Fault Source 0 +#define PWM_O_0_FLTSRC1 0x00000078 // PWM0 Fault Source 1 +#define PWM_O_0_MINFLTPER 0x0000007C // PWM0 Minimum Fault Period +#define PWM_O_1_CTL 0x00000080 // PWM1 Control +#define PWM_O_1_INTEN 0x00000084 // PWM1 Interrupt and Trigger + // Enable +#define PWM_O_1_RIS 0x00000088 // PWM1 Raw Interrupt Status +#define PWM_O_1_ISC 0x0000008C // PWM1 Interrupt Status and Clear +#define PWM_O_1_LOAD 0x00000090 // PWM1 Load +#define PWM_O_1_COUNT 0x00000094 // PWM1 Counter +#define PWM_O_1_CMPA 0x00000098 // PWM1 Compare A +#define PWM_O_1_CMPB 0x0000009C // PWM1 Compare B +#define PWM_O_1_GENA 0x000000A0 // PWM1 Generator A Control +#define PWM_O_1_GENB 0x000000A4 // PWM1 Generator B Control +#define PWM_O_1_DBCTL 0x000000A8 // PWM1 Dead-Band Control +#define PWM_O_1_DBRISE 0x000000AC // PWM1 Dead-Band Rising-Edge Delay +#define PWM_O_1_DBFALL 0x000000B0 // PWM1 Dead-Band + // Falling-Edge-Delay +#define PWM_O_1_FLTSRC0 0x000000B4 // PWM1 Fault Source 0 +#define PWM_O_1_FLTSRC1 0x000000B8 // PWM1 Fault Source 1 +#define PWM_O_1_MINFLTPER 0x000000BC // PWM1 Minimum Fault Period +#define PWM_O_2_CTL 0x000000C0 // PWM2 Control +#define PWM_O_2_INTEN 0x000000C4 // PWM2 Interrupt and Trigger + // Enable +#define PWM_O_2_RIS 0x000000C8 // PWM2 Raw Interrupt Status +#define PWM_O_2_ISC 0x000000CC // PWM2 Interrupt Status and Clear +#define PWM_O_2_LOAD 0x000000D0 // PWM2 Load +#define PWM_O_2_COUNT 0x000000D4 // PWM2 Counter +#define PWM_O_2_CMPA 0x000000D8 // PWM2 Compare A +#define PWM_O_2_CMPB 0x000000DC // PWM2 Compare B +#define PWM_O_2_GENA 0x000000E0 // PWM2 Generator A Control +#define PWM_O_2_GENB 0x000000E4 // PWM2 Generator B Control +#define PWM_O_2_DBCTL 0x000000E8 // PWM2 Dead-Band Control +#define PWM_O_2_DBRISE 0x000000EC // PWM2 Dead-Band Rising-Edge Delay +#define PWM_O_2_DBFALL 0x000000F0 // PWM2 Dead-Band + // Falling-Edge-Delay +#define PWM_O_2_FLTSRC0 0x000000F4 // PWM2 Fault Source 0 +#define PWM_O_2_FLTSRC1 0x000000F8 // PWM2 Fault Source 1 +#define PWM_O_2_MINFLTPER 0x000000FC // PWM2 Minimum Fault Period +#define PWM_O_3_CTL 0x00000100 // PWM3 Control +#define PWM_O_3_INTEN 0x00000104 // PWM3 Interrupt and Trigger + // Enable +#define PWM_O_3_RIS 0x00000108 // PWM3 Raw Interrupt Status +#define PWM_O_3_ISC 0x0000010C // PWM3 Interrupt Status and Clear +#define PWM_O_3_LOAD 0x00000110 // PWM3 Load +#define PWM_O_3_COUNT 0x00000114 // PWM3 Counter +#define PWM_O_3_CMPA 0x00000118 // PWM3 Compare A +#define PWM_O_3_CMPB 0x0000011C // PWM3 Compare B +#define PWM_O_3_GENA 0x00000120 // PWM3 Generator A Control +#define PWM_O_3_GENB 0x00000124 // PWM3 Generator B Control +#define PWM_O_3_DBCTL 0x00000128 // PWM3 Dead-Band Control +#define PWM_O_3_DBRISE 0x0000012C // PWM3 Dead-Band Rising-Edge Delay +#define PWM_O_3_DBFALL 0x00000130 // PWM3 Dead-Band + // Falling-Edge-Delay +#define PWM_O_3_FLTSRC0 0x00000134 // PWM3 Fault Source 0 +#define PWM_O_3_FLTSRC1 0x00000138 // PWM3 Fault Source 1 +#define PWM_O_3_MINFLTPER 0x0000013C // PWM3 Minimum Fault Period +#define PWM_O_0_FLTSEN 0x00000800 // PWM0 Fault Pin Logic Sense +#define PWM_O_0_FLTSTAT0 0x00000804 // PWM0 Fault Status 0 +#define PWM_O_0_FLTSTAT1 0x00000808 // PWM0 Fault Status 1 +#define PWM_O_1_FLTSEN 0x00000880 // PWM1 Fault Pin Logic Sense +#define PWM_O_1_FLTSTAT0 0x00000884 // PWM1 Fault Status 0 +#define PWM_O_1_FLTSTAT1 0x00000888 // PWM1 Fault Status 1 +#define PWM_O_2_FLTSEN 0x00000900 // PWM2 Fault Pin Logic Sense +#define PWM_O_2_FLTSTAT0 0x00000904 // PWM2 Fault Status 0 +#define PWM_O_2_FLTSTAT1 0x00000908 // PWM2 Fault Status 1 +#define PWM_O_3_FLTSEN 0x00000980 // PWM3 Fault Pin Logic Sense +#define PWM_O_3_FLTSTAT0 0x00000984 // PWM3 Fault Status 0 +#define PWM_O_3_FLTSTAT1 0x00000988 // PWM3 Fault Status 1 +#define PWM_O_PP 0x00000FC0 // PWM Peripheral Properties +#define PWM_O_CC 0x00000FC8 // PWM Clock Configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_CTL register. +// +//***************************************************************************** +#define PWM_CTL_GLOBALSYNC3 0x00000008 // Update PWM Generator 3 +#define PWM_CTL_GLOBALSYNC2 0x00000004 // Update PWM Generator 2 +#define PWM_CTL_GLOBALSYNC1 0x00000002 // Update PWM Generator 1 +#define PWM_CTL_GLOBALSYNC0 0x00000001 // Update PWM Generator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_SYNC register. +// +//***************************************************************************** +#define PWM_SYNC_SYNC3 0x00000008 // Reset Generator 3 Counter +#define PWM_SYNC_SYNC2 0x00000004 // Reset Generator 2 Counter +#define PWM_SYNC_SYNC1 0x00000002 // Reset Generator 1 Counter +#define PWM_SYNC_SYNC0 0x00000001 // Reset Generator 0 Counter + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_ENABLE register. +// +//***************************************************************************** +#define PWM_ENABLE_PWM7EN 0x00000080 // MnPWM7 Output Enable +#define PWM_ENABLE_PWM6EN 0x00000040 // MnPWM6 Output Enable +#define PWM_ENABLE_PWM5EN 0x00000020 // MnPWM5 Output Enable +#define PWM_ENABLE_PWM4EN 0x00000010 // MnPWM4 Output Enable +#define PWM_ENABLE_PWM3EN 0x00000008 // MnPWM3 Output Enable +#define PWM_ENABLE_PWM2EN 0x00000004 // MnPWM2 Output Enable +#define PWM_ENABLE_PWM1EN 0x00000002 // MnPWM1 Output Enable +#define PWM_ENABLE_PWM0EN 0x00000001 // MnPWM0 Output Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_INVERT register. +// +//***************************************************************************** +#define PWM_INVERT_PWM7INV 0x00000080 // Invert MnPWM7 Signal +#define PWM_INVERT_PWM6INV 0x00000040 // Invert MnPWM6 Signal +#define PWM_INVERT_PWM5INV 0x00000020 // Invert MnPWM5 Signal +#define PWM_INVERT_PWM4INV 0x00000010 // Invert MnPWM4 Signal +#define PWM_INVERT_PWM3INV 0x00000008 // Invert MnPWM3 Signal +#define PWM_INVERT_PWM2INV 0x00000004 // Invert MnPWM2 Signal +#define PWM_INVERT_PWM1INV 0x00000002 // Invert MnPWM1 Signal +#define PWM_INVERT_PWM0INV 0x00000001 // Invert MnPWM0 Signal + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_FAULT register. +// +//***************************************************************************** +#define PWM_FAULT_FAULT7 0x00000080 // MnPWM7 Fault +#define PWM_FAULT_FAULT6 0x00000040 // MnPWM6 Fault +#define PWM_FAULT_FAULT5 0x00000020 // MnPWM5 Fault +#define PWM_FAULT_FAULT4 0x00000010 // MnPWM4 Fault +#define PWM_FAULT_FAULT3 0x00000008 // MnPWM3 Fault +#define PWM_FAULT_FAULT2 0x00000004 // MnPWM2 Fault +#define PWM_FAULT_FAULT1 0x00000002 // MnPWM1 Fault +#define PWM_FAULT_FAULT0 0x00000001 // MnPWM0 Fault + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_INTEN register. +// +//***************************************************************************** +#define PWM_INTEN_INTFAULT3 0x00080000 // Interrupt Fault 3 +#define PWM_INTEN_INTFAULT2 0x00040000 // Interrupt Fault 2 +#define PWM_INTEN_INTFAULT1 0x00020000 // Interrupt Fault 1 +#define PWM_INTEN_INTFAULT0 0x00010000 // Interrupt Fault 0 +#define PWM_INTEN_INTPWM3 0x00000008 // PWM3 Interrupt Enable +#define PWM_INTEN_INTPWM2 0x00000004 // PWM2 Interrupt Enable +#define PWM_INTEN_INTPWM1 0x00000002 // PWM1 Interrupt Enable +#define PWM_INTEN_INTPWM0 0x00000001 // PWM0 Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_RIS register. +// +//***************************************************************************** +#define PWM_RIS_INTFAULT3 0x00080000 // Interrupt Fault PWM 3 +#define PWM_RIS_INTFAULT2 0x00040000 // Interrupt Fault PWM 2 +#define PWM_RIS_INTFAULT1 0x00020000 // Interrupt Fault PWM 1 +#define PWM_RIS_INTFAULT0 0x00010000 // Interrupt Fault PWM 0 +#define PWM_RIS_INTPWM3 0x00000008 // PWM3 Interrupt Asserted +#define PWM_RIS_INTPWM2 0x00000004 // PWM2 Interrupt Asserted +#define PWM_RIS_INTPWM1 0x00000002 // PWM1 Interrupt Asserted +#define PWM_RIS_INTPWM0 0x00000001 // PWM0 Interrupt Asserted + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_ISC register. +// +//***************************************************************************** +#define PWM_ISC_INTFAULT3 0x00080000 // FAULT3 Interrupt Asserted +#define PWM_ISC_INTFAULT2 0x00040000 // FAULT2 Interrupt Asserted +#define PWM_ISC_INTFAULT1 0x00020000 // FAULT1 Interrupt Asserted +#define PWM_ISC_INTFAULT0 0x00010000 // FAULT0 Interrupt Asserted +#define PWM_ISC_INTPWM3 0x00000008 // PWM3 Interrupt Status +#define PWM_ISC_INTPWM2 0x00000004 // PWM2 Interrupt Status +#define PWM_ISC_INTPWM1 0x00000002 // PWM1 Interrupt Status +#define PWM_ISC_INTPWM0 0x00000001 // PWM0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_STATUS register. +// +//***************************************************************************** +#define PWM_STATUS_FAULT3 0x00000008 // Generator 3 Fault Status +#define PWM_STATUS_FAULT2 0x00000004 // Generator 2 Fault Status +#define PWM_STATUS_FAULT1 0x00000002 // Generator 1 Fault Status +#define PWM_STATUS_FAULT0 0x00000001 // Generator 0 Fault Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_FAULTVAL register. +// +//***************************************************************************** +#define PWM_FAULTVAL_PWM7 0x00000080 // MnPWM7 Fault Value +#define PWM_FAULTVAL_PWM6 0x00000040 // MnPWM6 Fault Value +#define PWM_FAULTVAL_PWM5 0x00000020 // MnPWM5 Fault Value +#define PWM_FAULTVAL_PWM4 0x00000010 // MnPWM4 Fault Value +#define PWM_FAULTVAL_PWM3 0x00000008 // MnPWM3 Fault Value +#define PWM_FAULTVAL_PWM2 0x00000004 // MnPWM2 Fault Value +#define PWM_FAULTVAL_PWM1 0x00000002 // MnPWM1 Fault Value +#define PWM_FAULTVAL_PWM0 0x00000001 // MnPWM0 Fault Value + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_ENUPD register. +// +//***************************************************************************** +#define PWM_ENUPD_ENUPD7_M 0x0000C000 // MnPWM7 Enable Update Mode +#define PWM_ENUPD_ENUPD7_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD7_LSYNC 0x00008000 // Locally Synchronized +#define PWM_ENUPD_ENUPD7_GSYNC 0x0000C000 // Globally Synchronized +#define PWM_ENUPD_ENUPD6_M 0x00003000 // MnPWM6 Enable Update Mode +#define PWM_ENUPD_ENUPD6_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD6_LSYNC 0x00002000 // Locally Synchronized +#define PWM_ENUPD_ENUPD6_GSYNC 0x00003000 // Globally Synchronized +#define PWM_ENUPD_ENUPD5_M 0x00000C00 // MnPWM5 Enable Update Mode +#define PWM_ENUPD_ENUPD5_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD5_LSYNC 0x00000800 // Locally Synchronized +#define PWM_ENUPD_ENUPD5_GSYNC 0x00000C00 // Globally Synchronized +#define PWM_ENUPD_ENUPD4_M 0x00000300 // MnPWM4 Enable Update Mode +#define PWM_ENUPD_ENUPD4_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD4_LSYNC 0x00000200 // Locally Synchronized +#define PWM_ENUPD_ENUPD4_GSYNC 0x00000300 // Globally Synchronized +#define PWM_ENUPD_ENUPD3_M 0x000000C0 // MnPWM3 Enable Update Mode +#define PWM_ENUPD_ENUPD3_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD3_LSYNC 0x00000080 // Locally Synchronized +#define PWM_ENUPD_ENUPD3_GSYNC 0x000000C0 // Globally Synchronized +#define PWM_ENUPD_ENUPD2_M 0x00000030 // MnPWM2 Enable Update Mode +#define PWM_ENUPD_ENUPD2_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD2_LSYNC 0x00000020 // Locally Synchronized +#define PWM_ENUPD_ENUPD2_GSYNC 0x00000030 // Globally Synchronized +#define PWM_ENUPD_ENUPD1_M 0x0000000C // MnPWM1 Enable Update Mode +#define PWM_ENUPD_ENUPD1_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD1_LSYNC 0x00000008 // Locally Synchronized +#define PWM_ENUPD_ENUPD1_GSYNC 0x0000000C // Globally Synchronized +#define PWM_ENUPD_ENUPD0_M 0x00000003 // MnPWM0 Enable Update Mode +#define PWM_ENUPD_ENUPD0_IMM 0x00000000 // Immediate +#define PWM_ENUPD_ENUPD0_LSYNC 0x00000002 // Locally Synchronized +#define PWM_ENUPD_ENUPD0_GSYNC 0x00000003 // Globally Synchronized + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_CTL register. +// +//***************************************************************************** +#define PWM_0_CTL_LATCH 0x00040000 // Latch Fault Input +#define PWM_0_CTL_MINFLTPER 0x00020000 // Minimum Fault Period +#define PWM_0_CTL_FLTSRC 0x00010000 // Fault Condition Source +#define PWM_0_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode +#define PWM_0_CTL_DBFALLUPD_I 0x00000000 // Immediate +#define PWM_0_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized +#define PWM_0_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized +#define PWM_0_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode +#define PWM_0_CTL_DBRISEUPD_I 0x00000000 // Immediate +#define PWM_0_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized +#define PWM_0_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized +#define PWM_0_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode +#define PWM_0_CTL_DBCTLUPD_I 0x00000000 // Immediate +#define PWM_0_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized +#define PWM_0_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized +#define PWM_0_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode +#define PWM_0_CTL_GENBUPD_I 0x00000000 // Immediate +#define PWM_0_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized +#define PWM_0_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized +#define PWM_0_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode +#define PWM_0_CTL_GENAUPD_I 0x00000000 // Immediate +#define PWM_0_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized +#define PWM_0_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized +#define PWM_0_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode +#define PWM_0_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode +#define PWM_0_CTL_LOADUPD 0x00000008 // Load Register Update Mode +#define PWM_0_CTL_DEBUG 0x00000004 // Debug Mode +#define PWM_0_CTL_MODE 0x00000002 // Counter Mode +#define PWM_0_CTL_ENABLE 0x00000001 // PWM Block Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_INTEN register. +// +//***************************************************************************** +#define PWM_0_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB + // Down +#define PWM_0_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up +#define PWM_0_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA + // Down +#define PWM_0_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up +#define PWM_0_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD +#define PWM_0_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0 +#define PWM_0_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB + // Down +#define PWM_0_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB + // Up +#define PWM_0_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA + // Down +#define PWM_0_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA + // Up +#define PWM_0_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD +#define PWM_0_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_RIS register. +// +//***************************************************************************** +#define PWM_0_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt + // Status +#define PWM_0_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status +#define PWM_0_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt + // Status +#define PWM_0_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status +#define PWM_0_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status +#define PWM_0_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_ISC register. +// +//***************************************************************************** +#define PWM_0_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt +#define PWM_0_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt +#define PWM_0_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt +#define PWM_0_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt +#define PWM_0_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt +#define PWM_0_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_LOAD register. +// +//***************************************************************************** +#define PWM_0_LOAD_M 0x0000FFFF // Counter Load Value +#define PWM_0_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_COUNT register. +// +//***************************************************************************** +#define PWM_0_COUNT_M 0x0000FFFF // Counter Value +#define PWM_0_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_CMPA register. +// +//***************************************************************************** +#define PWM_0_CMPA_M 0x0000FFFF // Comparator A Value +#define PWM_0_CMPA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_CMPB register. +// +//***************************************************************************** +#define PWM_0_CMPB_M 0x0000FFFF // Comparator B Value +#define PWM_0_CMPB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_GENA register. +// +//***************************************************************************** +#define PWM_0_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_0_GENA_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA +#define PWM_0_GENA_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmA Low +#define PWM_0_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High +#define PWM_0_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_0_GENA_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA +#define PWM_0_GENA_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmA Low +#define PWM_0_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High +#define PWM_0_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_0_GENA_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA +#define PWM_0_GENA_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmA Low +#define PWM_0_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High +#define PWM_0_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_0_GENA_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA +#define PWM_0_GENA_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmA Low +#define PWM_0_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High +#define PWM_0_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_0_GENA_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_0_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA +#define PWM_0_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low +#define PWM_0_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High +#define PWM_0_GENA_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_0_GENA_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_0_GENA_ACTZERO_INV 0x00000001 // Invert pwmA +#define PWM_0_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low +#define PWM_0_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_GENB register. +// +//***************************************************************************** +#define PWM_0_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_0_GENB_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB +#define PWM_0_GENB_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmB Low +#define PWM_0_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High +#define PWM_0_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_0_GENB_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB +#define PWM_0_GENB_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmB Low +#define PWM_0_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High +#define PWM_0_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_0_GENB_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB +#define PWM_0_GENB_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmB Low +#define PWM_0_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High +#define PWM_0_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_0_GENB_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_0_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB +#define PWM_0_GENB_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmB Low +#define PWM_0_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High +#define PWM_0_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_0_GENB_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_0_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB +#define PWM_0_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low +#define PWM_0_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High +#define PWM_0_GENB_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_0_GENB_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_0_GENB_ACTZERO_INV 0x00000001 // Invert pwmB +#define PWM_0_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low +#define PWM_0_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_DBCTL register. +// +//***************************************************************************** +#define PWM_0_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_DBRISE register. +// +//***************************************************************************** +#define PWM_0_DBRISE_DELAY_M 0x00000FFF // Dead-Band Rise Delay +#define PWM_0_DBRISE_DELAY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_DBFALL register. +// +//***************************************************************************** +#define PWM_0_DBFALL_DELAY_M 0x00000FFF // Dead-Band Fall Delay +#define PWM_0_DBFALL_DELAY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_FLTSRC0 +// register. +// +//***************************************************************************** +#define PWM_0_FLTSRC0_FAULT3 0x00000008 // Fault3 Input +#define PWM_0_FLTSRC0_FAULT2 0x00000004 // Fault2 Input +#define PWM_0_FLTSRC0_FAULT1 0x00000002 // Fault1 Input +#define PWM_0_FLTSRC0_FAULT0 0x00000001 // Fault0 Input + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_FLTSRC1 +// register. +// +//***************************************************************************** +#define PWM_0_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7 +#define PWM_0_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6 +#define PWM_0_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5 +#define PWM_0_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4 +#define PWM_0_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3 +#define PWM_0_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2 +#define PWM_0_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1 +#define PWM_0_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_MINFLTPER +// register. +// +//***************************************************************************** +#define PWM_0_MINFLTPER_M 0x0000FFFF // Minimum Fault Period +#define PWM_0_MINFLTPER_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_CTL register. +// +//***************************************************************************** +#define PWM_1_CTL_LATCH 0x00040000 // Latch Fault Input +#define PWM_1_CTL_MINFLTPER 0x00020000 // Minimum Fault Period +#define PWM_1_CTL_FLTSRC 0x00010000 // Fault Condition Source +#define PWM_1_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode +#define PWM_1_CTL_DBFALLUPD_I 0x00000000 // Immediate +#define PWM_1_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized +#define PWM_1_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized +#define PWM_1_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode +#define PWM_1_CTL_DBRISEUPD_I 0x00000000 // Immediate +#define PWM_1_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized +#define PWM_1_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized +#define PWM_1_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode +#define PWM_1_CTL_DBCTLUPD_I 0x00000000 // Immediate +#define PWM_1_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized +#define PWM_1_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized +#define PWM_1_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode +#define PWM_1_CTL_GENBUPD_I 0x00000000 // Immediate +#define PWM_1_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized +#define PWM_1_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized +#define PWM_1_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode +#define PWM_1_CTL_GENAUPD_I 0x00000000 // Immediate +#define PWM_1_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized +#define PWM_1_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized +#define PWM_1_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode +#define PWM_1_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode +#define PWM_1_CTL_LOADUPD 0x00000008 // Load Register Update Mode +#define PWM_1_CTL_DEBUG 0x00000004 // Debug Mode +#define PWM_1_CTL_MODE 0x00000002 // Counter Mode +#define PWM_1_CTL_ENABLE 0x00000001 // PWM Block Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_INTEN register. +// +//***************************************************************************** +#define PWM_1_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB + // Down +#define PWM_1_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up +#define PWM_1_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA + // Down +#define PWM_1_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up +#define PWM_1_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD +#define PWM_1_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0 +#define PWM_1_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB + // Down +#define PWM_1_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB + // Up +#define PWM_1_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA + // Down +#define PWM_1_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA + // Up +#define PWM_1_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD +#define PWM_1_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_RIS register. +// +//***************************************************************************** +#define PWM_1_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt + // Status +#define PWM_1_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status +#define PWM_1_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt + // Status +#define PWM_1_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status +#define PWM_1_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status +#define PWM_1_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_ISC register. +// +//***************************************************************************** +#define PWM_1_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt +#define PWM_1_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt +#define PWM_1_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt +#define PWM_1_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt +#define PWM_1_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt +#define PWM_1_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_LOAD register. +// +//***************************************************************************** +#define PWM_1_LOAD_LOAD_M 0x0000FFFF // Counter Load Value +#define PWM_1_LOAD_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_COUNT register. +// +//***************************************************************************** +#define PWM_1_COUNT_COUNT_M 0x0000FFFF // Counter Value +#define PWM_1_COUNT_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_CMPA register. +// +//***************************************************************************** +#define PWM_1_CMPA_COMPA_M 0x0000FFFF // Comparator A Value +#define PWM_1_CMPA_COMPA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_CMPB register. +// +//***************************************************************************** +#define PWM_1_CMPB_COMPB_M 0x0000FFFF // Comparator B Value +#define PWM_1_CMPB_COMPB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_GENA register. +// +//***************************************************************************** +#define PWM_1_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_1_GENA_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA +#define PWM_1_GENA_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmA Low +#define PWM_1_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High +#define PWM_1_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_1_GENA_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA +#define PWM_1_GENA_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmA Low +#define PWM_1_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High +#define PWM_1_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_1_GENA_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA +#define PWM_1_GENA_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmA Low +#define PWM_1_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High +#define PWM_1_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_1_GENA_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA +#define PWM_1_GENA_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmA Low +#define PWM_1_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High +#define PWM_1_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_1_GENA_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_1_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA +#define PWM_1_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low +#define PWM_1_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High +#define PWM_1_GENA_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_1_GENA_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_1_GENA_ACTZERO_INV 0x00000001 // Invert pwmA +#define PWM_1_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low +#define PWM_1_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_GENB register. +// +//***************************************************************************** +#define PWM_1_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_1_GENB_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB +#define PWM_1_GENB_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmB Low +#define PWM_1_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High +#define PWM_1_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_1_GENB_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB +#define PWM_1_GENB_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmB Low +#define PWM_1_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High +#define PWM_1_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_1_GENB_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB +#define PWM_1_GENB_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmB Low +#define PWM_1_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High +#define PWM_1_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_1_GENB_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_1_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB +#define PWM_1_GENB_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmB Low +#define PWM_1_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High +#define PWM_1_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_1_GENB_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_1_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB +#define PWM_1_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low +#define PWM_1_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High +#define PWM_1_GENB_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_1_GENB_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_1_GENB_ACTZERO_INV 0x00000001 // Invert pwmB +#define PWM_1_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low +#define PWM_1_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_DBCTL register. +// +//***************************************************************************** +#define PWM_1_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_DBRISE register. +// +//***************************************************************************** +#define PWM_1_DBRISE_RISEDELAY_M \ + 0x00000FFF // Dead-Band Rise Delay +#define PWM_1_DBRISE_RISEDELAY_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_DBFALL register. +// +//***************************************************************************** +#define PWM_1_DBFALL_FALLDELAY_M \ + 0x00000FFF // Dead-Band Fall Delay +#define PWM_1_DBFALL_FALLDELAY_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_FLTSRC0 +// register. +// +//***************************************************************************** +#define PWM_1_FLTSRC0_FAULT3 0x00000008 // Fault3 Input +#define PWM_1_FLTSRC0_FAULT2 0x00000004 // Fault2 Input +#define PWM_1_FLTSRC0_FAULT1 0x00000002 // Fault1 Input +#define PWM_1_FLTSRC0_FAULT0 0x00000001 // Fault0 Input + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_FLTSRC1 +// register. +// +//***************************************************************************** +#define PWM_1_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7 +#define PWM_1_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6 +#define PWM_1_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5 +#define PWM_1_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4 +#define PWM_1_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3 +#define PWM_1_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2 +#define PWM_1_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1 +#define PWM_1_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_MINFLTPER +// register. +// +//***************************************************************************** +#define PWM_1_MINFLTPER_MFP_M 0x0000FFFF // Minimum Fault Period +#define PWM_1_MINFLTPER_MFP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_CTL register. +// +//***************************************************************************** +#define PWM_2_CTL_LATCH 0x00040000 // Latch Fault Input +#define PWM_2_CTL_MINFLTPER 0x00020000 // Minimum Fault Period +#define PWM_2_CTL_FLTSRC 0x00010000 // Fault Condition Source +#define PWM_2_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode +#define PWM_2_CTL_DBFALLUPD_I 0x00000000 // Immediate +#define PWM_2_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized +#define PWM_2_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized +#define PWM_2_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode +#define PWM_2_CTL_DBRISEUPD_I 0x00000000 // Immediate +#define PWM_2_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized +#define PWM_2_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized +#define PWM_2_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode +#define PWM_2_CTL_DBCTLUPD_I 0x00000000 // Immediate +#define PWM_2_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized +#define PWM_2_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized +#define PWM_2_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode +#define PWM_2_CTL_GENBUPD_I 0x00000000 // Immediate +#define PWM_2_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized +#define PWM_2_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized +#define PWM_2_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode +#define PWM_2_CTL_GENAUPD_I 0x00000000 // Immediate +#define PWM_2_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized +#define PWM_2_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized +#define PWM_2_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode +#define PWM_2_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode +#define PWM_2_CTL_LOADUPD 0x00000008 // Load Register Update Mode +#define PWM_2_CTL_DEBUG 0x00000004 // Debug Mode +#define PWM_2_CTL_MODE 0x00000002 // Counter Mode +#define PWM_2_CTL_ENABLE 0x00000001 // PWM Block Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_INTEN register. +// +//***************************************************************************** +#define PWM_2_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB + // Down +#define PWM_2_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up +#define PWM_2_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA + // Down +#define PWM_2_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up +#define PWM_2_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD +#define PWM_2_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0 +#define PWM_2_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB + // Down +#define PWM_2_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB + // Up +#define PWM_2_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA + // Down +#define PWM_2_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA + // Up +#define PWM_2_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD +#define PWM_2_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_RIS register. +// +//***************************************************************************** +#define PWM_2_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt + // Status +#define PWM_2_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status +#define PWM_2_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt + // Status +#define PWM_2_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status +#define PWM_2_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status +#define PWM_2_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_ISC register. +// +//***************************************************************************** +#define PWM_2_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt +#define PWM_2_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt +#define PWM_2_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt +#define PWM_2_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt +#define PWM_2_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt +#define PWM_2_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_LOAD register. +// +//***************************************************************************** +#define PWM_2_LOAD_LOAD_M 0x0000FFFF // Counter Load Value +#define PWM_2_LOAD_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_COUNT register. +// +//***************************************************************************** +#define PWM_2_COUNT_COUNT_M 0x0000FFFF // Counter Value +#define PWM_2_COUNT_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_CMPA register. +// +//***************************************************************************** +#define PWM_2_CMPA_COMPA_M 0x0000FFFF // Comparator A Value +#define PWM_2_CMPA_COMPA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_CMPB register. +// +//***************************************************************************** +#define PWM_2_CMPB_COMPB_M 0x0000FFFF // Comparator B Value +#define PWM_2_CMPB_COMPB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_GENA register. +// +//***************************************************************************** +#define PWM_2_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_2_GENA_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA +#define PWM_2_GENA_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmA Low +#define PWM_2_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High +#define PWM_2_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_2_GENA_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA +#define PWM_2_GENA_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmA Low +#define PWM_2_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High +#define PWM_2_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_2_GENA_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA +#define PWM_2_GENA_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmA Low +#define PWM_2_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High +#define PWM_2_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_2_GENA_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA +#define PWM_2_GENA_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmA Low +#define PWM_2_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High +#define PWM_2_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_2_GENA_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_2_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA +#define PWM_2_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low +#define PWM_2_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High +#define PWM_2_GENA_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_2_GENA_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_2_GENA_ACTZERO_INV 0x00000001 // Invert pwmA +#define PWM_2_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low +#define PWM_2_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_GENB register. +// +//***************************************************************************** +#define PWM_2_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_2_GENB_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB +#define PWM_2_GENB_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmB Low +#define PWM_2_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High +#define PWM_2_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_2_GENB_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB +#define PWM_2_GENB_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmB Low +#define PWM_2_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High +#define PWM_2_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_2_GENB_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB +#define PWM_2_GENB_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmB Low +#define PWM_2_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High +#define PWM_2_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_2_GENB_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_2_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB +#define PWM_2_GENB_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmB Low +#define PWM_2_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High +#define PWM_2_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_2_GENB_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_2_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB +#define PWM_2_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low +#define PWM_2_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High +#define PWM_2_GENB_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_2_GENB_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_2_GENB_ACTZERO_INV 0x00000001 // Invert pwmB +#define PWM_2_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low +#define PWM_2_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_DBCTL register. +// +//***************************************************************************** +#define PWM_2_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_DBRISE register. +// +//***************************************************************************** +#define PWM_2_DBRISE_RISEDELAY_M \ + 0x00000FFF // Dead-Band Rise Delay +#define PWM_2_DBRISE_RISEDELAY_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_DBFALL register. +// +//***************************************************************************** +#define PWM_2_DBFALL_FALLDELAY_M \ + 0x00000FFF // Dead-Band Fall Delay +#define PWM_2_DBFALL_FALLDELAY_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_FLTSRC0 +// register. +// +//***************************************************************************** +#define PWM_2_FLTSRC0_FAULT3 0x00000008 // Fault3 Input +#define PWM_2_FLTSRC0_FAULT2 0x00000004 // Fault2 Input +#define PWM_2_FLTSRC0_FAULT1 0x00000002 // Fault1 Input +#define PWM_2_FLTSRC0_FAULT0 0x00000001 // Fault0 Input + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_FLTSRC1 +// register. +// +//***************************************************************************** +#define PWM_2_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7 +#define PWM_2_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6 +#define PWM_2_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5 +#define PWM_2_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4 +#define PWM_2_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3 +#define PWM_2_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2 +#define PWM_2_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1 +#define PWM_2_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_MINFLTPER +// register. +// +//***************************************************************************** +#define PWM_2_MINFLTPER_MFP_M 0x0000FFFF // Minimum Fault Period +#define PWM_2_MINFLTPER_MFP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_CTL register. +// +//***************************************************************************** +#define PWM_3_CTL_LATCH 0x00040000 // Latch Fault Input +#define PWM_3_CTL_MINFLTPER 0x00020000 // Minimum Fault Period +#define PWM_3_CTL_FLTSRC 0x00010000 // Fault Condition Source +#define PWM_3_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode +#define PWM_3_CTL_DBFALLUPD_I 0x00000000 // Immediate +#define PWM_3_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized +#define PWM_3_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized +#define PWM_3_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode +#define PWM_3_CTL_DBRISEUPD_I 0x00000000 // Immediate +#define PWM_3_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized +#define PWM_3_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized +#define PWM_3_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode +#define PWM_3_CTL_DBCTLUPD_I 0x00000000 // Immediate +#define PWM_3_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized +#define PWM_3_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized +#define PWM_3_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode +#define PWM_3_CTL_GENBUPD_I 0x00000000 // Immediate +#define PWM_3_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized +#define PWM_3_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized +#define PWM_3_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode +#define PWM_3_CTL_GENAUPD_I 0x00000000 // Immediate +#define PWM_3_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized +#define PWM_3_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized +#define PWM_3_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode +#define PWM_3_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode +#define PWM_3_CTL_LOADUPD 0x00000008 // Load Register Update Mode +#define PWM_3_CTL_DEBUG 0x00000004 // Debug Mode +#define PWM_3_CTL_MODE 0x00000002 // Counter Mode +#define PWM_3_CTL_ENABLE 0x00000001 // PWM Block Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_INTEN register. +// +//***************************************************************************** +#define PWM_3_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB + // Down +#define PWM_3_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up +#define PWM_3_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA + // Down +#define PWM_3_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up +#define PWM_3_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD +#define PWM_3_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0 +#define PWM_3_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB + // Down +#define PWM_3_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB + // Up +#define PWM_3_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA + // Down +#define PWM_3_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA + // Up +#define PWM_3_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD +#define PWM_3_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_RIS register. +// +//***************************************************************************** +#define PWM_3_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt + // Status +#define PWM_3_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status +#define PWM_3_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt + // Status +#define PWM_3_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status +#define PWM_3_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status +#define PWM_3_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_ISC register. +// +//***************************************************************************** +#define PWM_3_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt +#define PWM_3_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt +#define PWM_3_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt +#define PWM_3_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt +#define PWM_3_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt +#define PWM_3_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_LOAD register. +// +//***************************************************************************** +#define PWM_3_LOAD_LOAD_M 0x0000FFFF // Counter Load Value +#define PWM_3_LOAD_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_COUNT register. +// +//***************************************************************************** +#define PWM_3_COUNT_COUNT_M 0x0000FFFF // Counter Value +#define PWM_3_COUNT_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_CMPA register. +// +//***************************************************************************** +#define PWM_3_CMPA_COMPA_M 0x0000FFFF // Comparator A Value +#define PWM_3_CMPA_COMPA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_CMPB register. +// +//***************************************************************************** +#define PWM_3_CMPB_COMPB_M 0x0000FFFF // Comparator B Value +#define PWM_3_CMPB_COMPB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_GENA register. +// +//***************************************************************************** +#define PWM_3_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_3_GENA_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA +#define PWM_3_GENA_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmA Low +#define PWM_3_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High +#define PWM_3_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_3_GENA_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA +#define PWM_3_GENA_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmA Low +#define PWM_3_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High +#define PWM_3_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_3_GENA_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA +#define PWM_3_GENA_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmA Low +#define PWM_3_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High +#define PWM_3_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_3_GENA_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA +#define PWM_3_GENA_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmA Low +#define PWM_3_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High +#define PWM_3_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_3_GENA_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_3_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA +#define PWM_3_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low +#define PWM_3_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High +#define PWM_3_GENA_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_3_GENA_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_3_GENA_ACTZERO_INV 0x00000001 // Invert pwmA +#define PWM_3_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low +#define PWM_3_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_GENB register. +// +//***************************************************************************** +#define PWM_3_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_3_GENB_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB +#define PWM_3_GENB_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmB Low +#define PWM_3_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High +#define PWM_3_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_3_GENB_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB +#define PWM_3_GENB_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmB Low +#define PWM_3_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High +#define PWM_3_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_3_GENB_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB +#define PWM_3_GENB_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmB Low +#define PWM_3_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High +#define PWM_3_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_3_GENB_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_3_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB +#define PWM_3_GENB_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmB Low +#define PWM_3_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High +#define PWM_3_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_3_GENB_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_3_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB +#define PWM_3_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low +#define PWM_3_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High +#define PWM_3_GENB_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_3_GENB_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_3_GENB_ACTZERO_INV 0x00000001 // Invert pwmB +#define PWM_3_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low +#define PWM_3_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_DBCTL register. +// +//***************************************************************************** +#define PWM_3_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_DBRISE register. +// +//***************************************************************************** +#define PWM_3_DBRISE_RISEDELAY_M \ + 0x00000FFF // Dead-Band Rise Delay +#define PWM_3_DBRISE_RISEDELAY_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_DBFALL register. +// +//***************************************************************************** +#define PWM_3_DBFALL_FALLDELAY_M \ + 0x00000FFF // Dead-Band Fall Delay +#define PWM_3_DBFALL_FALLDELAY_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_FLTSRC0 +// register. +// +//***************************************************************************** +#define PWM_3_FLTSRC0_FAULT3 0x00000008 // Fault3 Input +#define PWM_3_FLTSRC0_FAULT2 0x00000004 // Fault2 Input +#define PWM_3_FLTSRC0_FAULT1 0x00000002 // Fault1 Input +#define PWM_3_FLTSRC0_FAULT0 0x00000001 // Fault0 Input + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_FLTSRC1 +// register. +// +//***************************************************************************** +#define PWM_3_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7 +#define PWM_3_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6 +#define PWM_3_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5 +#define PWM_3_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4 +#define PWM_3_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3 +#define PWM_3_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2 +#define PWM_3_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1 +#define PWM_3_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_MINFLTPER +// register. +// +//***************************************************************************** +#define PWM_3_MINFLTPER_MFP_M 0x0000FFFF // Minimum Fault Period +#define PWM_3_MINFLTPER_MFP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_FLTSEN register. +// +//***************************************************************************** +#define PWM_0_FLTSEN_FAULT3 0x00000008 // Fault3 Sense +#define PWM_0_FLTSEN_FAULT2 0x00000004 // Fault2 Sense +#define PWM_0_FLTSEN_FAULT1 0x00000002 // Fault1 Sense +#define PWM_0_FLTSEN_FAULT0 0x00000001 // Fault0 Sense + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_FLTSTAT0 +// register. +// +//***************************************************************************** +#define PWM_0_FLTSTAT0_FAULT3 0x00000008 // Fault Input 3 +#define PWM_0_FLTSTAT0_FAULT2 0x00000004 // Fault Input 2 +#define PWM_0_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1 +#define PWM_0_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_0_FLTSTAT1 +// register. +// +//***************************************************************************** +#define PWM_0_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger +#define PWM_0_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger +#define PWM_0_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger +#define PWM_0_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger +#define PWM_0_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger +#define PWM_0_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger +#define PWM_0_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger +#define PWM_0_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_FLTSEN register. +// +//***************************************************************************** +#define PWM_1_FLTSEN_FAULT3 0x00000008 // Fault3 Sense +#define PWM_1_FLTSEN_FAULT2 0x00000004 // Fault2 Sense +#define PWM_1_FLTSEN_FAULT1 0x00000002 // Fault1 Sense +#define PWM_1_FLTSEN_FAULT0 0x00000001 // Fault0 Sense + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_FLTSTAT0 +// register. +// +//***************************************************************************** +#define PWM_1_FLTSTAT0_FAULT3 0x00000008 // Fault Input 3 +#define PWM_1_FLTSTAT0_FAULT2 0x00000004 // Fault Input 2 +#define PWM_1_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1 +#define PWM_1_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_1_FLTSTAT1 +// register. +// +//***************************************************************************** +#define PWM_1_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger +#define PWM_1_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger +#define PWM_1_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger +#define PWM_1_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger +#define PWM_1_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger +#define PWM_1_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger +#define PWM_1_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger +#define PWM_1_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_FLTSEN register. +// +//***************************************************************************** +#define PWM_2_FLTSEN_FAULT3 0x00000008 // Fault3 Sense +#define PWM_2_FLTSEN_FAULT2 0x00000004 // Fault2 Sense +#define PWM_2_FLTSEN_FAULT1 0x00000002 // Fault1 Sense +#define PWM_2_FLTSEN_FAULT0 0x00000001 // Fault0 Sense + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_FLTSTAT0 +// register. +// +//***************************************************************************** +#define PWM_2_FLTSTAT0_FAULT3 0x00000008 // Fault Input 3 +#define PWM_2_FLTSTAT0_FAULT2 0x00000004 // Fault Input 2 +#define PWM_2_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1 +#define PWM_2_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_2_FLTSTAT1 +// register. +// +//***************************************************************************** +#define PWM_2_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger +#define PWM_2_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger +#define PWM_2_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger +#define PWM_2_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger +#define PWM_2_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger +#define PWM_2_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger +#define PWM_2_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger +#define PWM_2_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_FLTSEN register. +// +//***************************************************************************** +#define PWM_3_FLTSEN_FAULT3 0x00000008 // Fault3 Sense +#define PWM_3_FLTSEN_FAULT2 0x00000004 // Fault2 Sense +#define PWM_3_FLTSEN_FAULT1 0x00000002 // Fault1 Sense +#define PWM_3_FLTSEN_FAULT0 0x00000001 // Fault0 Sense + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_FLTSTAT0 +// register. +// +//***************************************************************************** +#define PWM_3_FLTSTAT0_FAULT3 0x00000008 // Fault Input 3 +#define PWM_3_FLTSTAT0_FAULT2 0x00000004 // Fault Input 2 +#define PWM_3_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1 +#define PWM_3_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_3_FLTSTAT1 +// register. +// +//***************************************************************************** +#define PWM_3_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger +#define PWM_3_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger +#define PWM_3_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger +#define PWM_3_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger +#define PWM_3_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger +#define PWM_3_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger +#define PWM_3_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger +#define PWM_3_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_PP register. +// +//***************************************************************************** +#define PWM_PP_GCNT_M 0x0000000F // Generators +#define PWM_PP_FCNT_M 0x000000F0 // Fault Inputs (per PWM unit) +#define PWM_PP_ESYNC 0x00000100 // Extended Synchronization +#define PWM_PP_EFAULT 0x00000200 // Extended Fault +#define PWM_PP_ONE 0x00000400 // One-Shot Mode +#define PWM_PP_GCNT_S 0 +#define PWM_PP_FCNT_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_CC register. +// +//***************************************************************************** +#define PWM_CC_USEPWM 0x00000100 // Use PWM Clock Divisor +#define PWM_CC_PWMDIV_M 0x00000007 // PWM Clock Divider +#define PWM_CC_PWMDIV_2 0x00000000 // /2 +#define PWM_CC_PWMDIV_4 0x00000001 // /4 +#define PWM_CC_PWMDIV_8 0x00000002 // /8 +#define PWM_CC_PWMDIV_16 0x00000003 // /16 +#define PWM_CC_PWMDIV_32 0x00000004 // /32 +#define PWM_CC_PWMDIV_64 0x00000005 // /64 + +//***************************************************************************** +// +// The following are defines for the PWM Generator standard offsets. +// +//***************************************************************************** +#define PWM_O_X_CTL 0x00000000 // Gen Control Reg +#define PWM_O_X_INTEN 0x00000004 // Gen Int/Trig Enable Reg +#define PWM_O_X_RIS 0x00000008 // Gen Raw Int Status Reg +#define PWM_O_X_ISC 0x0000000C // Gen Int Status Reg +#define PWM_O_X_LOAD 0x00000010 // Gen Load Reg +#define PWM_O_X_COUNT 0x00000014 // Gen Counter Reg +#define PWM_O_X_CMPA 0x00000018 // Gen Compare A Reg +#define PWM_O_X_CMPB 0x0000001C // Gen Compare B Reg +#define PWM_O_X_GENA 0x00000020 // Gen Generator A Ctrl Reg +#define PWM_O_X_GENB 0x00000024 // Gen Generator B Ctrl Reg +#define PWM_O_X_DBCTL 0x00000028 // Gen Dead Band Ctrl Reg +#define PWM_O_X_DBRISE 0x0000002C // Gen DB Rising Edge Delay Reg +#define PWM_O_X_DBFALL 0x00000030 // Gen DB Falling Edge Delay Reg +#define PWM_O_X_FLTSRC0 0x00000034 // Fault pin, comparator condition +#define PWM_O_X_FLTSRC1 0x00000038 // Digital comparator condition +#define PWM_O_X_MINFLTPER 0x0000003C // Fault minimum period extension +#define PWM_GEN_0_OFFSET 0x00000040 // PWM0 base +#define PWM_GEN_1_OFFSET 0x00000080 // PWM1 base +#define PWM_GEN_2_OFFSET 0x000000C0 // PWM2 base +#define PWM_GEN_3_OFFSET 0x00000100 // PWM3 base + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_CTL register. +// +//***************************************************************************** +#define PWM_X_CTL_LATCH 0x00040000 // Latch Fault Input +#define PWM_X_CTL_MINFLTPER 0x00020000 // Minimum Fault Period +#define PWM_X_CTL_FLTSRC 0x00010000 // Fault Condition Source +#define PWM_X_CTL_DBFALLUPD_M 0x0000C000 // PWMnDBFALL Update Mode +#define PWM_X_CTL_DBFALLUPD_I 0x00000000 // Immediate +#define PWM_X_CTL_DBFALLUPD_LS 0x00008000 // Locally Synchronized +#define PWM_X_CTL_DBFALLUPD_GS 0x0000C000 // Globally Synchronized +#define PWM_X_CTL_DBRISEUPD_M 0x00003000 // PWMnDBRISE Update Mode +#define PWM_X_CTL_DBRISEUPD_I 0x00000000 // Immediate +#define PWM_X_CTL_DBRISEUPD_LS 0x00002000 // Locally Synchronized +#define PWM_X_CTL_DBRISEUPD_GS 0x00003000 // Globally Synchronized +#define PWM_X_CTL_DBCTLUPD_M 0x00000C00 // PWMnDBCTL Update Mode +#define PWM_X_CTL_DBCTLUPD_I 0x00000000 // Immediate +#define PWM_X_CTL_DBCTLUPD_LS 0x00000800 // Locally Synchronized +#define PWM_X_CTL_DBCTLUPD_GS 0x00000C00 // Globally Synchronized +#define PWM_X_CTL_GENBUPD_M 0x00000300 // PWMnGENB Update Mode +#define PWM_X_CTL_GENBUPD_I 0x00000000 // Immediate +#define PWM_X_CTL_GENBUPD_LS 0x00000200 // Locally Synchronized +#define PWM_X_CTL_GENBUPD_GS 0x00000300 // Globally Synchronized +#define PWM_X_CTL_GENAUPD_M 0x000000C0 // PWMnGENA Update Mode +#define PWM_X_CTL_GENAUPD_I 0x00000000 // Immediate +#define PWM_X_CTL_GENAUPD_LS 0x00000080 // Locally Synchronized +#define PWM_X_CTL_GENAUPD_GS 0x000000C0 // Globally Synchronized +#define PWM_X_CTL_CMPBUPD 0x00000020 // Comparator B Update Mode +#define PWM_X_CTL_CMPAUPD 0x00000010 // Comparator A Update Mode +#define PWM_X_CTL_LOADUPD 0x00000008 // Load Register Update Mode +#define PWM_X_CTL_DEBUG 0x00000004 // Debug Mode +#define PWM_X_CTL_MODE 0x00000002 // Counter Mode +#define PWM_X_CTL_ENABLE 0x00000001 // PWM Block Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_INTEN register. +// +//***************************************************************************** +#define PWM_X_INTEN_TRCMPBD 0x00002000 // Trigger for Counter=PWMnCMPB + // Down +#define PWM_X_INTEN_TRCMPBU 0x00001000 // Trigger for Counter=PWMnCMPB Up +#define PWM_X_INTEN_TRCMPAD 0x00000800 // Trigger for Counter=PWMnCMPA + // Down +#define PWM_X_INTEN_TRCMPAU 0x00000400 // Trigger for Counter=PWMnCMPA Up +#define PWM_X_INTEN_TRCNTLOAD 0x00000200 // Trigger for Counter=PWMnLOAD +#define PWM_X_INTEN_TRCNTZERO 0x00000100 // Trigger for Counter=0 +#define PWM_X_INTEN_INTCMPBD 0x00000020 // Interrupt for Counter=PWMnCMPB + // Down +#define PWM_X_INTEN_INTCMPBU 0x00000010 // Interrupt for Counter=PWMnCMPB + // Up +#define PWM_X_INTEN_INTCMPAD 0x00000008 // Interrupt for Counter=PWMnCMPA + // Down +#define PWM_X_INTEN_INTCMPAU 0x00000004 // Interrupt for Counter=PWMnCMPA + // Up +#define PWM_X_INTEN_INTCNTLOAD 0x00000002 // Interrupt for Counter=PWMnLOAD +#define PWM_X_INTEN_INTCNTZERO 0x00000001 // Interrupt for Counter=0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_RIS register. +// +//***************************************************************************** +#define PWM_X_RIS_INTCMPBD 0x00000020 // Comparator B Down Interrupt + // Status +#define PWM_X_RIS_INTCMPBU 0x00000010 // Comparator B Up Interrupt Status +#define PWM_X_RIS_INTCMPAD 0x00000008 // Comparator A Down Interrupt + // Status +#define PWM_X_RIS_INTCMPAU 0x00000004 // Comparator A Up Interrupt Status +#define PWM_X_RIS_INTCNTLOAD 0x00000002 // Counter=Load Interrupt Status +#define PWM_X_RIS_INTCNTZERO 0x00000001 // Counter=0 Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_ISC register. +// +//***************************************************************************** +#define PWM_X_ISC_INTCMPBD 0x00000020 // Comparator B Down Interrupt +#define PWM_X_ISC_INTCMPBU 0x00000010 // Comparator B Up Interrupt +#define PWM_X_ISC_INTCMPAD 0x00000008 // Comparator A Down Interrupt +#define PWM_X_ISC_INTCMPAU 0x00000004 // Comparator A Up Interrupt +#define PWM_X_ISC_INTCNTLOAD 0x00000002 // Counter=Load Interrupt +#define PWM_X_ISC_INTCNTZERO 0x00000001 // Counter=0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_LOAD register. +// +//***************************************************************************** +#define PWM_X_LOAD_M 0x0000FFFF // Counter Load Value +#define PWM_X_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_COUNT register. +// +//***************************************************************************** +#define PWM_X_COUNT_M 0x0000FFFF // Counter Value +#define PWM_X_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_CMPA register. +// +//***************************************************************************** +#define PWM_X_CMPA_M 0x0000FFFF // Comparator A Value +#define PWM_X_CMPA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_CMPB register. +// +//***************************************************************************** +#define PWM_X_CMPB_M 0x0000FFFF // Comparator B Value +#define PWM_X_CMPB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_GENA register. +// +//***************************************************************************** +#define PWM_X_GENA_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_X_GENA_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENA_ACTCMPBD_INV 0x00000400 // Invert pwmA +#define PWM_X_GENA_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmA Low +#define PWM_X_GENA_ACTCMPBD_ONE 0x00000C00 // Drive pwmA High +#define PWM_X_GENA_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_X_GENA_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENA_ACTCMPBU_INV 0x00000100 // Invert pwmA +#define PWM_X_GENA_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmA Low +#define PWM_X_GENA_ACTCMPBU_ONE 0x00000300 // Drive pwmA High +#define PWM_X_GENA_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_X_GENA_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENA_ACTCMPAD_INV 0x00000040 // Invert pwmA +#define PWM_X_GENA_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmA Low +#define PWM_X_GENA_ACTCMPAD_ONE 0x000000C0 // Drive pwmA High +#define PWM_X_GENA_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_X_GENA_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENA_ACTCMPAU_INV 0x00000010 // Invert pwmA +#define PWM_X_GENA_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmA Low +#define PWM_X_GENA_ACTCMPAU_ONE 0x00000030 // Drive pwmA High +#define PWM_X_GENA_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_X_GENA_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_X_GENA_ACTLOAD_INV 0x00000004 // Invert pwmA +#define PWM_X_GENA_ACTLOAD_ZERO 0x00000008 // Drive pwmA Low +#define PWM_X_GENA_ACTLOAD_ONE 0x0000000C // Drive pwmA High +#define PWM_X_GENA_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_X_GENA_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_X_GENA_ACTZERO_INV 0x00000001 // Invert pwmA +#define PWM_X_GENA_ACTZERO_ZERO 0x00000002 // Drive pwmA Low +#define PWM_X_GENA_ACTZERO_ONE 0x00000003 // Drive pwmA High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_GENB register. +// +//***************************************************************************** +#define PWM_X_GENB_ACTCMPBD_M 0x00000C00 // Action for Comparator B Down +#define PWM_X_GENB_ACTCMPBD_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENB_ACTCMPBD_INV 0x00000400 // Invert pwmB +#define PWM_X_GENB_ACTCMPBD_ZERO \ + 0x00000800 // Drive pwmB Low +#define PWM_X_GENB_ACTCMPBD_ONE 0x00000C00 // Drive pwmB High +#define PWM_X_GENB_ACTCMPBU_M 0x00000300 // Action for Comparator B Up +#define PWM_X_GENB_ACTCMPBU_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENB_ACTCMPBU_INV 0x00000100 // Invert pwmB +#define PWM_X_GENB_ACTCMPBU_ZERO \ + 0x00000200 // Drive pwmB Low +#define PWM_X_GENB_ACTCMPBU_ONE 0x00000300 // Drive pwmB High +#define PWM_X_GENB_ACTCMPAD_M 0x000000C0 // Action for Comparator A Down +#define PWM_X_GENB_ACTCMPAD_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENB_ACTCMPAD_INV 0x00000040 // Invert pwmB +#define PWM_X_GENB_ACTCMPAD_ZERO \ + 0x00000080 // Drive pwmB Low +#define PWM_X_GENB_ACTCMPAD_ONE 0x000000C0 // Drive pwmB High +#define PWM_X_GENB_ACTCMPAU_M 0x00000030 // Action for Comparator A Up +#define PWM_X_GENB_ACTCMPAU_NONE \ + 0x00000000 // Do nothing +#define PWM_X_GENB_ACTCMPAU_INV 0x00000010 // Invert pwmB +#define PWM_X_GENB_ACTCMPAU_ZERO \ + 0x00000020 // Drive pwmB Low +#define PWM_X_GENB_ACTCMPAU_ONE 0x00000030 // Drive pwmB High +#define PWM_X_GENB_ACTLOAD_M 0x0000000C // Action for Counter=LOAD +#define PWM_X_GENB_ACTLOAD_NONE 0x00000000 // Do nothing +#define PWM_X_GENB_ACTLOAD_INV 0x00000004 // Invert pwmB +#define PWM_X_GENB_ACTLOAD_ZERO 0x00000008 // Drive pwmB Low +#define PWM_X_GENB_ACTLOAD_ONE 0x0000000C // Drive pwmB High +#define PWM_X_GENB_ACTZERO_M 0x00000003 // Action for Counter=0 +#define PWM_X_GENB_ACTZERO_NONE 0x00000000 // Do nothing +#define PWM_X_GENB_ACTZERO_INV 0x00000001 // Invert pwmB +#define PWM_X_GENB_ACTZERO_ZERO 0x00000002 // Drive pwmB Low +#define PWM_X_GENB_ACTZERO_ONE 0x00000003 // Drive pwmB High + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_DBCTL register. +// +//***************************************************************************** +#define PWM_X_DBCTL_ENABLE 0x00000001 // Dead-Band Generator Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_DBRISE register. +// +//***************************************************************************** +#define PWM_X_DBRISE_DELAY_M 0x00000FFF // Dead-Band Rise Delay +#define PWM_X_DBRISE_DELAY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_DBFALL register. +// +//***************************************************************************** +#define PWM_X_DBFALL_DELAY_M 0x00000FFF // Dead-Band Fall Delay +#define PWM_X_DBFALL_DELAY_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_FLTSRC0 +// register. +// +//***************************************************************************** +#define PWM_X_FLTSRC0_FAULT3 0x00000008 // Fault3 Input +#define PWM_X_FLTSRC0_FAULT2 0x00000004 // Fault2 Input +#define PWM_X_FLTSRC0_FAULT1 0x00000002 // Fault1 Input +#define PWM_X_FLTSRC0_FAULT0 0x00000001 // Fault0 Input + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_FLTSRC1 +// register. +// +//***************************************************************************** +#define PWM_X_FLTSRC1_DCMP7 0x00000080 // Digital Comparator 7 +#define PWM_X_FLTSRC1_DCMP6 0x00000040 // Digital Comparator 6 +#define PWM_X_FLTSRC1_DCMP5 0x00000020 // Digital Comparator 5 +#define PWM_X_FLTSRC1_DCMP4 0x00000010 // Digital Comparator 4 +#define PWM_X_FLTSRC1_DCMP3 0x00000008 // Digital Comparator 3 +#define PWM_X_FLTSRC1_DCMP2 0x00000004 // Digital Comparator 2 +#define PWM_X_FLTSRC1_DCMP1 0x00000002 // Digital Comparator 1 +#define PWM_X_FLTSRC1_DCMP0 0x00000001 // Digital Comparator 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_MINFLTPER +// register. +// +//***************************************************************************** +#define PWM_X_MINFLTPER_M 0x0000FFFF // Minimum Fault Period +#define PWM_X_MINFLTPER_S 0 + +//***************************************************************************** +// +// The following are defines for the PWM Generator extended offsets. +// +//***************************************************************************** +#define PWM_O_X_FLTSEN 0x00000000 // Fault logic sense +#define PWM_O_X_FLTSTAT0 0x00000004 // Pin and comparator status +#define PWM_O_X_FLTSTAT1 0x00000008 // Digital comparator status +#define PWM_EXT_0_OFFSET 0x00000800 // PWM0 extended base +#define PWM_EXT_1_OFFSET 0x00000880 // PWM1 extended base +#define PWM_EXT_2_OFFSET 0x00000900 // PWM2 extended base +#define PWM_EXT_3_OFFSET 0x00000980 // PWM3 extended base + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_FLTSEN register. +// +//***************************************************************************** +#define PWM_X_FLTSEN_FAULT3 0x00000008 // Fault3 Sense +#define PWM_X_FLTSEN_FAULT2 0x00000004 // Fault2 Sense +#define PWM_X_FLTSEN_FAULT1 0x00000002 // Fault1 Sense +#define PWM_X_FLTSEN_FAULT0 0x00000001 // Fault0 Sense + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_FLTSTAT0 +// register. +// +//***************************************************************************** +#define PWM_X_FLTSTAT0_FAULT3 0x00000008 // Fault Input 3 +#define PWM_X_FLTSTAT0_FAULT2 0x00000004 // Fault Input 2 +#define PWM_X_FLTSTAT0_FAULT1 0x00000002 // Fault Input 1 +#define PWM_X_FLTSTAT0_FAULT0 0x00000001 // Fault Input 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the PWM_O_X_FLTSTAT1 +// register. +// +//***************************************************************************** +#define PWM_X_FLTSTAT1_DCMP7 0x00000080 // Digital Comparator 7 Trigger +#define PWM_X_FLTSTAT1_DCMP6 0x00000040 // Digital Comparator 6 Trigger +#define PWM_X_FLTSTAT1_DCMP5 0x00000020 // Digital Comparator 5 Trigger +#define PWM_X_FLTSTAT1_DCMP4 0x00000010 // Digital Comparator 4 Trigger +#define PWM_X_FLTSTAT1_DCMP3 0x00000008 // Digital Comparator 3 Trigger +#define PWM_X_FLTSTAT1_DCMP2 0x00000004 // Digital Comparator 2 Trigger +#define PWM_X_FLTSTAT1_DCMP1 0x00000002 // Digital Comparator 1 Trigger +#define PWM_X_FLTSTAT1_DCMP0 0x00000001 // Digital Comparator 0 Trigger + +#endif // __HW_PWM_H__ diff --git a/os/common/ext/TivaWare/inc/hw_qei.h b/os/common/ext/TivaWare/inc/hw_qei.h new file mode 100644 index 0000000..93c4a07 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_qei.h @@ -0,0 +1,178 @@ +//***************************************************************************** +// +// hw_qei.h - Macros used when accessing the QEI hardware. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_QEI_H__ +#define __HW_QEI_H__ + +//***************************************************************************** +// +// The following are defines for the QEI register offsets. +// +//***************************************************************************** +#define QEI_O_CTL 0x00000000 // QEI Control +#define QEI_O_STAT 0x00000004 // QEI Status +#define QEI_O_POS 0x00000008 // QEI Position +#define QEI_O_MAXPOS 0x0000000C // QEI Maximum Position +#define QEI_O_LOAD 0x00000010 // QEI Timer Load +#define QEI_O_TIME 0x00000014 // QEI Timer +#define QEI_O_COUNT 0x00000018 // QEI Velocity Counter +#define QEI_O_SPEED 0x0000001C // QEI Velocity +#define QEI_O_INTEN 0x00000020 // QEI Interrupt Enable +#define QEI_O_RIS 0x00000024 // QEI Raw Interrupt Status +#define QEI_O_ISC 0x00000028 // QEI Interrupt Status and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_CTL register. +// +//***************************************************************************** +#define QEI_CTL_FILTCNT_M 0x000F0000 // Input Filter Prescale Count +#define QEI_CTL_FILTEN 0x00002000 // Enable Input Filter +#define QEI_CTL_STALLEN 0x00001000 // Stall QEI +#define QEI_CTL_INVI 0x00000800 // Invert Index Pulse +#define QEI_CTL_INVB 0x00000400 // Invert PhB +#define QEI_CTL_INVA 0x00000200 // Invert PhA +#define QEI_CTL_VELDIV_M 0x000001C0 // Predivide Velocity +#define QEI_CTL_VELDIV_1 0x00000000 // QEI clock /1 +#define QEI_CTL_VELDIV_2 0x00000040 // QEI clock /2 +#define QEI_CTL_VELDIV_4 0x00000080 // QEI clock /4 +#define QEI_CTL_VELDIV_8 0x000000C0 // QEI clock /8 +#define QEI_CTL_VELDIV_16 0x00000100 // QEI clock /16 +#define QEI_CTL_VELDIV_32 0x00000140 // QEI clock /32 +#define QEI_CTL_VELDIV_64 0x00000180 // QEI clock /64 +#define QEI_CTL_VELDIV_128 0x000001C0 // QEI clock /128 +#define QEI_CTL_VELEN 0x00000020 // Capture Velocity +#define QEI_CTL_RESMODE 0x00000010 // Reset Mode +#define QEI_CTL_CAPMODE 0x00000008 // Capture Mode +#define QEI_CTL_SIGMODE 0x00000004 // Signal Mode +#define QEI_CTL_SWAP 0x00000002 // Swap Signals +#define QEI_CTL_ENABLE 0x00000001 // Enable QEI +#define QEI_CTL_FILTCNT_S 16 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_STAT register. +// +//***************************************************************************** +#define QEI_STAT_DIRECTION 0x00000002 // Direction of Rotation +#define QEI_STAT_ERROR 0x00000001 // Error Detected + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_POS register. +// +//***************************************************************************** +#define QEI_POS_M 0xFFFFFFFF // Current Position Integrator + // Value +#define QEI_POS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_MAXPOS register. +// +//***************************************************************************** +#define QEI_MAXPOS_M 0xFFFFFFFF // Maximum Position Integrator + // Value +#define QEI_MAXPOS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_LOAD register. +// +//***************************************************************************** +#define QEI_LOAD_M 0xFFFFFFFF // Velocity Timer Load Value +#define QEI_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_TIME register. +// +//***************************************************************************** +#define QEI_TIME_M 0xFFFFFFFF // Velocity Timer Current Value +#define QEI_TIME_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_COUNT register. +// +//***************************************************************************** +#define QEI_COUNT_M 0xFFFFFFFF // Velocity Pulse Count +#define QEI_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_SPEED register. +// +//***************************************************************************** +#define QEI_SPEED_M 0xFFFFFFFF // Velocity +#define QEI_SPEED_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_INTEN register. +// +//***************************************************************************** +#define QEI_INTEN_ERROR 0x00000008 // Phase Error Interrupt Enable +#define QEI_INTEN_DIR 0x00000004 // Direction Change Interrupt + // Enable +#define QEI_INTEN_TIMER 0x00000002 // Timer Expires Interrupt Enable +#define QEI_INTEN_INDEX 0x00000001 // Index Pulse Detected Interrupt + // Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_RIS register. +// +//***************************************************************************** +#define QEI_RIS_ERROR 0x00000008 // Phase Error Detected +#define QEI_RIS_DIR 0x00000004 // Direction Change Detected +#define QEI_RIS_TIMER 0x00000002 // Velocity Timer Expired +#define QEI_RIS_INDEX 0x00000001 // Index Pulse Asserted + +//***************************************************************************** +// +// The following are defines for the bit fields in the QEI_O_ISC register. +// +//***************************************************************************** +#define QEI_ISC_ERROR 0x00000008 // Phase Error Interrupt +#define QEI_ISC_DIR 0x00000004 // Direction Change Interrupt +#define QEI_ISC_TIMER 0x00000002 // Velocity Timer Expired Interrupt +#define QEI_ISC_INDEX 0x00000001 // Index Pulse Interrupt + +#endif // __HW_QEI_H__ diff --git a/os/common/ext/TivaWare/inc/hw_shamd5.h b/os/common/ext/TivaWare/inc/hw_shamd5.h new file mode 100644 index 0000000..1f697fe --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_shamd5.h @@ -0,0 +1,548 @@ +//***************************************************************************** +// +// hw_shamd5.h - Macros used when accessing the SHA/MD5 hardware. +// +// Copyright (c) 2012-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_SHAMD5_H__ +#define __HW_SHAMD5_H__ + +//***************************************************************************** +// +// The following are defines for the SHA/MD5 register offsets. +// +//***************************************************************************** +#define SHAMD5_O_ODIGEST_A 0x00000000 // SHA Outer Digest A +#define SHAMD5_O_ODIGEST_B 0x00000004 // SHA Outer Digest B +#define SHAMD5_O_ODIGEST_C 0x00000008 // SHA Outer Digest C +#define SHAMD5_O_ODIGEST_D 0x0000000C // SHA Outer Digest D +#define SHAMD5_O_ODIGEST_E 0x00000010 // SHA Outer Digest E +#define SHAMD5_O_ODIGEST_F 0x00000014 // SHA Outer Digest F +#define SHAMD5_O_ODIGEST_G 0x00000018 // SHA Outer Digest G +#define SHAMD5_O_ODIGEST_H 0x0000001C // SHA Outer Digest H +#define SHAMD5_O_IDIGEST_A 0x00000020 // SHA Inner Digest A +#define SHAMD5_O_IDIGEST_B 0x00000024 // SHA Inner Digest B +#define SHAMD5_O_IDIGEST_C 0x00000028 // SHA Inner Digest C +#define SHAMD5_O_IDIGEST_D 0x0000002C // SHA Inner Digest D +#define SHAMD5_O_IDIGEST_E 0x00000030 // SHA Inner Digest E +#define SHAMD5_O_IDIGEST_F 0x00000034 // SHA Inner Digest F +#define SHAMD5_O_IDIGEST_G 0x00000038 // SHA Inner Digest G +#define SHAMD5_O_IDIGEST_H 0x0000003C // SHA Inner Digest H +#define SHAMD5_O_DIGEST_COUNT 0x00000040 // SHA Digest Count +#define SHAMD5_O_MODE 0x00000044 // SHA Mode +#define SHAMD5_O_LENGTH 0x00000048 // SHA Length +#define SHAMD5_O_DATA_0_IN 0x00000080 // SHA Data 0 Input +#define SHAMD5_O_DATA_1_IN 0x00000084 // SHA Data 1 Input +#define SHAMD5_O_DATA_2_IN 0x00000088 // SHA Data 2 Input +#define SHAMD5_O_DATA_3_IN 0x0000008C // SHA Data 3 Input +#define SHAMD5_O_DATA_4_IN 0x00000090 // SHA Data 4 Input +#define SHAMD5_O_DATA_5_IN 0x00000094 // SHA Data 5 Input +#define SHAMD5_O_DATA_6_IN 0x00000098 // SHA Data 6 Input +#define SHAMD5_O_DATA_7_IN 0x0000009C // SHA Data 7 Input +#define SHAMD5_O_DATA_8_IN 0x000000A0 // SHA Data 8 Input +#define SHAMD5_O_DATA_9_IN 0x000000A4 // SHA Data 9 Input +#define SHAMD5_O_DATA_10_IN 0x000000A8 // SHA Data 10 Input +#define SHAMD5_O_DATA_11_IN 0x000000AC // SHA Data 11 Input +#define SHAMD5_O_DATA_12_IN 0x000000B0 // SHA Data 12 Input +#define SHAMD5_O_DATA_13_IN 0x000000B4 // SHA Data 13 Input +#define SHAMD5_O_DATA_14_IN 0x000000B8 // SHA Data 14 Input +#define SHAMD5_O_DATA_15_IN 0x000000BC // SHA Data 15 Input +#define SHAMD5_O_REVISION 0x00000100 // SHA Revision +#define SHAMD5_O_SYSCONFIG 0x00000110 // SHA System Configuration +#define SHAMD5_O_SYSSTATUS 0x00000114 // SHA System Status +#define SHAMD5_O_IRQSTATUS 0x00000118 // SHA Interrupt Status +#define SHAMD5_O_IRQENABLE 0x0000011C // SHA Interrupt Enable +#define SHAMD5_O_DMAIM 0xFFFFC010 // SHA DMA Interrupt Mask +#define SHAMD5_O_DMARIS 0xFFFFC014 // SHA DMA Raw Interrupt Status +#define SHAMD5_O_DMAMIS 0xFFFFC018 // SHA DMA Masked Interrupt Status +#define SHAMD5_O_DMAIC 0xFFFFC01C // SHA DMA Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_A +// register. +// +//***************************************************************************** +#define SHAMD5_ODIGEST_A_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_ODIGEST_A_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_B +// register. +// +//***************************************************************************** +#define SHAMD5_ODIGEST_B_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_ODIGEST_B_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_C +// register. +// +//***************************************************************************** +#define SHAMD5_ODIGEST_C_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_ODIGEST_C_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_D +// register. +// +//***************************************************************************** +#define SHAMD5_ODIGEST_D_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_ODIGEST_D_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_E +// register. +// +//***************************************************************************** +#define SHAMD5_ODIGEST_E_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_ODIGEST_E_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_F +// register. +// +//***************************************************************************** +#define SHAMD5_ODIGEST_F_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_ODIGEST_F_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_G +// register. +// +//***************************************************************************** +#define SHAMD5_ODIGEST_G_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_ODIGEST_G_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_ODIGEST_H +// register. +// +//***************************************************************************** +#define SHAMD5_ODIGEST_H_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_ODIGEST_H_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_A +// register. +// +//***************************************************************************** +#define SHAMD5_IDIGEST_A_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_IDIGEST_A_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_B +// register. +// +//***************************************************************************** +#define SHAMD5_IDIGEST_B_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_IDIGEST_B_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_C +// register. +// +//***************************************************************************** +#define SHAMD5_IDIGEST_C_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_IDIGEST_C_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_D +// register. +// +//***************************************************************************** +#define SHAMD5_IDIGEST_D_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_IDIGEST_D_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_E +// register. +// +//***************************************************************************** +#define SHAMD5_IDIGEST_E_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_IDIGEST_E_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_F +// register. +// +//***************************************************************************** +#define SHAMD5_IDIGEST_F_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_IDIGEST_F_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_G +// register. +// +//***************************************************************************** +#define SHAMD5_IDIGEST_G_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_IDIGEST_G_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_IDIGEST_H +// register. +// +//***************************************************************************** +#define SHAMD5_IDIGEST_H_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_IDIGEST_H_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DIGEST_COUNT +// register. +// +//***************************************************************************** +#define SHAMD5_DIGEST_COUNT_M 0xFFFFFFFF // Digest Count +#define SHAMD5_DIGEST_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_MODE register. +// +//***************************************************************************** +#define SHAMD5_MODE_HMAC_OUTER_HASH \ + 0x00000080 // HMAC Outer Hash Processing + // Enable +#define SHAMD5_MODE_HMAC_KEY_PROC \ + 0x00000020 // HMAC Key Processing Enable +#define SHAMD5_MODE_CLOSE_HASH 0x00000010 // Performs the padding, the + // Hash/HMAC will be 'closed' at + // the end of the block, as per + // MD5/SHA-1/SHA-2 specification +#define SHAMD5_MODE_ALGO_CONSTANT \ + 0x00000008 // The initial digest register will + // be overwritten with the + // algorithm constants for the + // selected algorithm when hashing + // and the initial digest count + // register will be reset to 0 +#define SHAMD5_MODE_ALGO_M 0x00000007 // Hash Algorithm +#define SHAMD5_MODE_ALGO_MD5 0x00000000 // MD5 +#define SHAMD5_MODE_ALGO_SHA1 0x00000002 // SHA-1 +#define SHAMD5_MODE_ALGO_SHA224 0x00000004 // SHA-224 +#define SHAMD5_MODE_ALGO_SHA256 0x00000006 // SHA-256 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_LENGTH +// register. +// +//***************************************************************************** +#define SHAMD5_LENGTH_M 0xFFFFFFFF // Block Length/Remaining Byte + // Count +#define SHAMD5_LENGTH_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_0_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_0_IN_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_0_IN_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_1_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_1_IN_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_1_IN_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_2_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_2_IN_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_2_IN_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_3_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_3_IN_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_3_IN_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_4_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_4_IN_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_4_IN_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_5_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_5_IN_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_5_IN_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_6_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_6_IN_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_6_IN_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_7_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_7_IN_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_7_IN_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_8_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_8_IN_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_8_IN_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_9_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_9_IN_DATA_M 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_9_IN_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_10_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_10_IN_DATA_M \ + 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_10_IN_DATA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_11_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_11_IN_DATA_M \ + 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_11_IN_DATA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_12_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_12_IN_DATA_M \ + 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_12_IN_DATA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_13_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_13_IN_DATA_M \ + 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_13_IN_DATA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_14_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_14_IN_DATA_M \ + 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_14_IN_DATA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DATA_15_IN +// register. +// +//***************************************************************************** +#define SHAMD5_DATA_15_IN_DATA_M \ + 0xFFFFFFFF // Digest/Key Data +#define SHAMD5_DATA_15_IN_DATA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_REVISION +// register. +// +//***************************************************************************** +#define SHAMD5_REVISION_M 0xFFFFFFFF // Revision Number +#define SHAMD5_REVISION_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_SYSCONFIG +// register. +// +//***************************************************************************** +#define SHAMD5_SYSCONFIG_SADVANCED \ + 0x00000080 // Advanced Mode Enable +#define SHAMD5_SYSCONFIG_SIDLE_M \ + 0x00000030 // Sidle mode +#define SHAMD5_SYSCONFIG_SIDLE_FORCE \ + 0x00000000 // Force-idle mode +#define SHAMD5_SYSCONFIG_DMA_EN 0x00000008 // uDMA Request Enable +#define SHAMD5_SYSCONFIG_IT_EN 0x00000004 // Interrupt Enable +#define SHAMD5_SYSCONFIG_SOFTRESET \ + 0x00000002 // Soft reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_SYSSTATUS +// register. +// +//***************************************************************************** +#define SHAMD5_SYSSTATUS_RESETDONE \ + 0x00000001 // Reset done status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_IRQSTATUS +// register. +// +//***************************************************************************** +#define SHAMD5_IRQSTATUS_CONTEXT_READY \ + 0x00000008 // Context Ready Status +#define SHAMD5_IRQSTATUS_INPUT_READY \ + 0x00000002 // Input Ready Status +#define SHAMD5_IRQSTATUS_OUTPUT_READY \ + 0x00000001 // Output Ready Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_IRQENABLE +// register. +// +//***************************************************************************** +#define SHAMD5_IRQENABLE_CONTEXT_READY \ + 0x00000008 // Mask for context ready interrupt +#define SHAMD5_IRQENABLE_INPUT_READY \ + 0x00000002 // Mask for input ready interrupt +#define SHAMD5_IRQENABLE_OUTPUT_READY \ + 0x00000001 // Mask for output ready interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DMAIM register. +// +//***************************************************************************** +#define SHAMD5_DMAIM_COUT 0x00000004 // Context Out DMA Done Interrupt + // Mask +#define SHAMD5_DMAIM_DIN 0x00000002 // Data In DMA Done Interrupt Mask +#define SHAMD5_DMAIM_CIN 0x00000001 // Context In DMA Done Interrupt + // Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DMARIS +// register. +// +//***************************************************************************** +#define SHAMD5_DMARIS_COUT 0x00000004 // Context Out DMA Done Raw + // Interrupt Status +#define SHAMD5_DMARIS_DIN 0x00000002 // Data In DMA Done Raw Interrupt + // Status +#define SHAMD5_DMARIS_CIN 0x00000001 // Context In DMA Done Raw + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DMAMIS +// register. +// +//***************************************************************************** +#define SHAMD5_DMAMIS_COUT 0x00000004 // Context Out DMA Done Masked + // Interrupt Status +#define SHAMD5_DMAMIS_DIN 0x00000002 // Data In DMA Done Masked + // Interrupt Status +#define SHAMD5_DMAMIS_CIN 0x00000001 // Context In DMA Done Raw + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SHAMD5_O_DMAIC register. +// +//***************************************************************************** +#define SHAMD5_DMAIC_COUT 0x00000004 // Context Out DMA Done Masked + // Interrupt Status +#define SHAMD5_DMAIC_DIN 0x00000002 // Data In DMA Done Interrupt Clear +#define SHAMD5_DMAIC_CIN 0x00000001 // Context In DMA Done Raw + // Interrupt Status + +#endif // __HW_SHAMD5_H__ diff --git a/os/common/ext/TivaWare/inc/hw_ssi.h b/os/common/ext/TivaWare/inc/hw_ssi.h new file mode 100644 index 0000000..3a1503d --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_ssi.h @@ -0,0 +1,237 @@ +//***************************************************************************** +// +// hw_ssi.h - Macros used when accessing the SSI hardware. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_SSI_H__ +#define __HW_SSI_H__ + +//***************************************************************************** +// +// The following are defines for the SSI register offsets. +// +//***************************************************************************** +#define SSI_O_CR0 0x00000000 // SSI Control 0 +#define SSI_O_CR1 0x00000004 // SSI Control 1 +#define SSI_O_DR 0x00000008 // SSI Data +#define SSI_O_SR 0x0000000C // SSI Status +#define SSI_O_CPSR 0x00000010 // SSI Clock Prescale +#define SSI_O_IM 0x00000014 // SSI Interrupt Mask +#define SSI_O_RIS 0x00000018 // SSI Raw Interrupt Status +#define SSI_O_MIS 0x0000001C // SSI Masked Interrupt Status +#define SSI_O_ICR 0x00000020 // SSI Interrupt Clear +#define SSI_O_DMACTL 0x00000024 // SSI DMA Control +#define SSI_O_PP 0x00000FC0 // SSI Peripheral Properties +#define SSI_O_CC 0x00000FC8 // SSI Clock Configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CR0 register. +// +//***************************************************************************** +#define SSI_CR0_SCR_M 0x0000FF00 // SSI Serial Clock Rate +#define SSI_CR0_SPH 0x00000080 // SSI Serial Clock Phase +#define SSI_CR0_SPO 0x00000040 // SSI Serial Clock Polarity +#define SSI_CR0_FRF_M 0x00000030 // SSI Frame Format Select +#define SSI_CR0_FRF_MOTO 0x00000000 // Freescale SPI Frame Format +#define SSI_CR0_FRF_TI 0x00000010 // Synchronous Serial Frame Format +#define SSI_CR0_FRF_NMW 0x00000020 // MICROWIRE Frame Format +#define SSI_CR0_DSS_M 0x0000000F // SSI Data Size Select +#define SSI_CR0_DSS_4 0x00000003 // 4-bit data +#define SSI_CR0_DSS_5 0x00000004 // 5-bit data +#define SSI_CR0_DSS_6 0x00000005 // 6-bit data +#define SSI_CR0_DSS_7 0x00000006 // 7-bit data +#define SSI_CR0_DSS_8 0x00000007 // 8-bit data +#define SSI_CR0_DSS_9 0x00000008 // 9-bit data +#define SSI_CR0_DSS_10 0x00000009 // 10-bit data +#define SSI_CR0_DSS_11 0x0000000A // 11-bit data +#define SSI_CR0_DSS_12 0x0000000B // 12-bit data +#define SSI_CR0_DSS_13 0x0000000C // 13-bit data +#define SSI_CR0_DSS_14 0x0000000D // 14-bit data +#define SSI_CR0_DSS_15 0x0000000E // 15-bit data +#define SSI_CR0_DSS_16 0x0000000F // 16-bit data +#define SSI_CR0_SCR_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CR1 register. +// +//***************************************************************************** +#define SSI_CR1_EOM 0x00000800 // Stop Frame (End of Message) +#define SSI_CR1_FSSHLDFRM 0x00000400 // FSS Hold Frame +#define SSI_CR1_HSCLKEN 0x00000200 // High Speed Clock Enable +#define SSI_CR1_DIR 0x00000100 // SSI Direction of Operation +#define SSI_CR1_MODE_M 0x000000C0 // SSI Mode +#define SSI_CR1_MODE_LEGACY 0x00000000 // Legacy SSI mode +#define SSI_CR1_MODE_BI 0x00000040 // Bi-SSI mode +#define SSI_CR1_MODE_QUAD 0x00000080 // Quad-SSI Mode +#define SSI_CR1_MODE_ADVANCED 0x000000C0 // Advanced SSI Mode with 8-bit + // packet size +#define SSI_CR1_EOT 0x00000010 // End of Transmission +#define SSI_CR1_MS 0x00000004 // SSI Master/Slave Select +#define SSI_CR1_SSE 0x00000002 // SSI Synchronous Serial Port + // Enable +#define SSI_CR1_LBM 0x00000001 // SSI Loopback Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_DR register. +// +//***************************************************************************** +#define SSI_DR_DATA_M 0x0000FFFF // SSI Receive/Transmit Data +#define SSI_DR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_SR register. +// +//***************************************************************************** +#define SSI_SR_BSY 0x00000010 // SSI Busy Bit +#define SSI_SR_RFF 0x00000008 // SSI Receive FIFO Full +#define SSI_SR_RNE 0x00000004 // SSI Receive FIFO Not Empty +#define SSI_SR_TNF 0x00000002 // SSI Transmit FIFO Not Full +#define SSI_SR_TFE 0x00000001 // SSI Transmit FIFO Empty + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CPSR register. +// +//***************************************************************************** +#define SSI_CPSR_CPSDVSR_M 0x000000FF // SSI Clock Prescale Divisor +#define SSI_CPSR_CPSDVSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_IM register. +// +//***************************************************************************** +#define SSI_IM_EOTIM 0x00000040 // End of Transmit Interrupt Mask +#define SSI_IM_DMATXIM 0x00000020 // SSI Transmit DMA Interrupt Mask +#define SSI_IM_DMARXIM 0x00000010 // SSI Receive DMA Interrupt Mask +#define SSI_IM_TXIM 0x00000008 // SSI Transmit FIFO Interrupt Mask +#define SSI_IM_RXIM 0x00000004 // SSI Receive FIFO Interrupt Mask +#define SSI_IM_RTIM 0x00000002 // SSI Receive Time-Out Interrupt + // Mask +#define SSI_IM_RORIM 0x00000001 // SSI Receive Overrun Interrupt + // Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_RIS register. +// +//***************************************************************************** +#define SSI_RIS_EOTRIS 0x00000040 // End of Transmit Raw Interrupt + // Status +#define SSI_RIS_DMATXRIS 0x00000020 // SSI Transmit DMA Raw Interrupt + // Status +#define SSI_RIS_DMARXRIS 0x00000010 // SSI Receive DMA Raw Interrupt + // Status +#define SSI_RIS_TXRIS 0x00000008 // SSI Transmit FIFO Raw Interrupt + // Status +#define SSI_RIS_RXRIS 0x00000004 // SSI Receive FIFO Raw Interrupt + // Status +#define SSI_RIS_RTRIS 0x00000002 // SSI Receive Time-Out Raw + // Interrupt Status +#define SSI_RIS_RORRIS 0x00000001 // SSI Receive Overrun Raw + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_MIS register. +// +//***************************************************************************** +#define SSI_MIS_EOTMIS 0x00000040 // End of Transmit Masked Interrupt + // Status +#define SSI_MIS_DMATXMIS 0x00000020 // SSI Transmit DMA Masked + // Interrupt Status +#define SSI_MIS_DMARXMIS 0x00000010 // SSI Receive DMA Masked Interrupt + // Status +#define SSI_MIS_TXMIS 0x00000008 // SSI Transmit FIFO Masked + // Interrupt Status +#define SSI_MIS_RXMIS 0x00000004 // SSI Receive FIFO Masked + // Interrupt Status +#define SSI_MIS_RTMIS 0x00000002 // SSI Receive Time-Out Masked + // Interrupt Status +#define SSI_MIS_RORMIS 0x00000001 // SSI Receive Overrun Masked + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_ICR register. +// +//***************************************************************************** +#define SSI_ICR_EOTIC 0x00000040 // End of Transmit Interrupt Clear +#define SSI_ICR_DMATXIC 0x00000020 // SSI Transmit DMA Interrupt Clear +#define SSI_ICR_DMARXIC 0x00000010 // SSI Receive DMA Interrupt Clear +#define SSI_ICR_RTIC 0x00000002 // SSI Receive Time-Out Interrupt + // Clear +#define SSI_ICR_RORIC 0x00000001 // SSI Receive Overrun Interrupt + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_DMACTL register. +// +//***************************************************************************** +#define SSI_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable +#define SSI_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_PP register. +// +//***************************************************************************** +#define SSI_PP_FSSHLDFRM 0x00000008 // FSS Hold Frame Capability +#define SSI_PP_MODE_M 0x00000006 // Mode of Operation +#define SSI_PP_MODE_LEGACY 0x00000000 // Legacy SSI mode +#define SSI_PP_MODE_ADVBI 0x00000002 // Legacy mode, Advanced SSI mode + // and Bi-SSI mode enabled +#define SSI_PP_MODE_ADVBIQUAD 0x00000004 // Legacy mode, Advanced mode, + // Bi-SSI and Quad-SSI mode enabled +#define SSI_PP_HSCLK 0x00000001 // High Speed Capability + +//***************************************************************************** +// +// The following are defines for the bit fields in the SSI_O_CC register. +// +//***************************************************************************** +#define SSI_CC_CS_M 0x0000000F // SSI Baud Clock Source +#define SSI_CC_CS_SYSPLL 0x00000000 // System clock (based on clock + // source and divisor factor) +#define SSI_CC_CS_PIOSC 0x00000005 // PIOSC + +#endif // __HW_SSI_H__ diff --git a/os/common/ext/TivaWare/inc/hw_sysctl.h b/os/common/ext/TivaWare/inc/hw_sysctl.h new file mode 100644 index 0000000..6f78204 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_sysctl.h @@ -0,0 +1,3749 @@ +//***************************************************************************** +// +// hw_sysctl.h - Macros used when accessing the system control hardware. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_SYSCTL_H__ +#define __HW_SYSCTL_H__ + +//***************************************************************************** +// +// The following are defines for the System Control register addresses. +// +//***************************************************************************** +#define SYSCTL_DID0 0x400FE000 // Device Identification 0 +#define SYSCTL_DID1 0x400FE004 // Device Identification 1 +#define SYSCTL_DC0 0x400FE008 // Device Capabilities 0 +#define SYSCTL_DC1 0x400FE010 // Device Capabilities 1 +#define SYSCTL_DC2 0x400FE014 // Device Capabilities 2 +#define SYSCTL_DC3 0x400FE018 // Device Capabilities 3 +#define SYSCTL_DC4 0x400FE01C // Device Capabilities 4 +#define SYSCTL_DC5 0x400FE020 // Device Capabilities 5 +#define SYSCTL_DC6 0x400FE024 // Device Capabilities 6 +#define SYSCTL_DC7 0x400FE028 // Device Capabilities 7 +#define SYSCTL_DC8 0x400FE02C // Device Capabilities 8 +#define SYSCTL_PBORCTL 0x400FE030 // Brown-Out Reset Control +#define SYSCTL_PTBOCTL 0x400FE038 // Power-Temp Brown Out Control +#define SYSCTL_SRCR0 0x400FE040 // Software Reset Control 0 +#define SYSCTL_SRCR1 0x400FE044 // Software Reset Control 1 +#define SYSCTL_SRCR2 0x400FE048 // Software Reset Control 2 +#define SYSCTL_RIS 0x400FE050 // Raw Interrupt Status +#define SYSCTL_IMC 0x400FE054 // Interrupt Mask Control +#define SYSCTL_MISC 0x400FE058 // Masked Interrupt Status and + // Clear +#define SYSCTL_RESC 0x400FE05C // Reset Cause +#define SYSCTL_PWRTC 0x400FE060 // Power-Temperature Cause +#define SYSCTL_RCC 0x400FE060 // Run-Mode Clock Configuration +#define SYSCTL_NMIC 0x400FE064 // NMI Cause Register +#define SYSCTL_GPIOHBCTL 0x400FE06C // GPIO High-Performance Bus + // Control +#define SYSCTL_RCC2 0x400FE070 // Run-Mode Clock Configuration 2 +#define SYSCTL_MOSCCTL 0x400FE07C // Main Oscillator Control +#define SYSCTL_RSCLKCFG 0x400FE0B0 // Run and Sleep Mode Configuration + // Register +#define SYSCTL_MEMTIM0 0x400FE0C0 // Memory Timing Parameter Register + // 0 for Main Flash and EEPROM +#define SYSCTL_RCGC0 0x400FE100 // Run Mode Clock Gating Control + // Register 0 +#define SYSCTL_RCGC1 0x400FE104 // Run Mode Clock Gating Control + // Register 1 +#define SYSCTL_RCGC2 0x400FE108 // Run Mode Clock Gating Control + // Register 2 +#define SYSCTL_SCGC0 0x400FE110 // Sleep Mode Clock Gating Control + // Register 0 +#define SYSCTL_SCGC1 0x400FE114 // Sleep Mode Clock Gating Control + // Register 1 +#define SYSCTL_SCGC2 0x400FE118 // Sleep Mode Clock Gating Control + // Register 2 +#define SYSCTL_DCGC0 0x400FE120 // Deep Sleep Mode Clock Gating + // Control Register 0 +#define SYSCTL_DCGC1 0x400FE124 // Deep-Sleep Mode Clock Gating + // Control Register 1 +#define SYSCTL_DCGC2 0x400FE128 // Deep Sleep Mode Clock Gating + // Control Register 2 +#define SYSCTL_ALTCLKCFG 0x400FE138 // Alternate Clock Configuration +#define SYSCTL_DSLPCLKCFG 0x400FE144 // Deep Sleep Clock Configuration +#define SYSCTL_DSCLKCFG 0x400FE144 // Deep Sleep Clock Configuration + // Register +#define SYSCTL_DIVSCLK 0x400FE148 // Divisor and Source Clock + // Configuration +#define SYSCTL_SYSPROP 0x400FE14C // System Properties +#define SYSCTL_PIOSCCAL 0x400FE150 // Precision Internal Oscillator + // Calibration +#define SYSCTL_PIOSCSTAT 0x400FE154 // Precision Internal Oscillator + // Statistics +#define SYSCTL_PLLFREQ0 0x400FE160 // PLL Frequency 0 +#define SYSCTL_PLLFREQ1 0x400FE164 // PLL Frequency 1 +#define SYSCTL_PLLSTAT 0x400FE168 // PLL Status +#define SYSCTL_SLPPWRCFG 0x400FE188 // Sleep Power Configuration +#define SYSCTL_DSLPPWRCFG 0x400FE18C // Deep-Sleep Power Configuration +#define SYSCTL_DC9 0x400FE190 // Device Capabilities 9 +#define SYSCTL_NVMSTAT 0x400FE1A0 // Non-Volatile Memory Information +#define SYSCTL_LDOSPCTL 0x400FE1B4 // LDO Sleep Power Control +#define SYSCTL_LDODPCTL 0x400FE1BC // LDO Deep-Sleep Power Control +#define SYSCTL_RESBEHAVCTL 0x400FE1D8 // Reset Behavior Control Register +#define SYSCTL_HSSR 0x400FE1F4 // Hardware System Service Request +#define SYSCTL_USBPDS 0x400FE280 // USB Power Domain Status +#define SYSCTL_USBMPC 0x400FE284 // USB Memory Power Control +#define SYSCTL_EMACPDS 0x400FE288 // Ethernet MAC Power Domain Status +#define SYSCTL_EMACMPC 0x400FE28C // Ethernet MAC Memory Power + // Control +#define SYSCTL_LCDMPC 0x400FE294 // LCD Memory Power Control +#define SYSCTL_PPWD 0x400FE300 // Watchdog Timer Peripheral + // Present +#define SYSCTL_PPTIMER 0x400FE304 // 16/32-Bit General-Purpose Timer + // Peripheral Present +#define SYSCTL_PPGPIO 0x400FE308 // General-Purpose Input/Output + // Peripheral Present +#define SYSCTL_PPDMA 0x400FE30C // Micro Direct Memory Access + // Peripheral Present +#define SYSCTL_PPEPI 0x400FE310 // EPI Peripheral Present +#define SYSCTL_PPHIB 0x400FE314 // Hibernation Peripheral Present +#define SYSCTL_PPUART 0x400FE318 // Universal Asynchronous + // Receiver/Transmitter Peripheral + // Present +#define SYSCTL_PPSSI 0x400FE31C // Synchronous Serial Interface + // Peripheral Present +#define SYSCTL_PPI2C 0x400FE320 // Inter-Integrated Circuit + // Peripheral Present +#define SYSCTL_PPUSB 0x400FE328 // Universal Serial Bus Peripheral + // Present +#define SYSCTL_PPEPHY 0x400FE330 // Ethernet PHY Peripheral Present +#define SYSCTL_PPCAN 0x400FE334 // Controller Area Network + // Peripheral Present +#define SYSCTL_PPADC 0x400FE338 // Analog-to-Digital Converter + // Peripheral Present +#define SYSCTL_PPACMP 0x400FE33C // Analog Comparator Peripheral + // Present +#define SYSCTL_PPPWM 0x400FE340 // Pulse Width Modulator Peripheral + // Present +#define SYSCTL_PPQEI 0x400FE344 // Quadrature Encoder Interface + // Peripheral Present +#define SYSCTL_PPLPC 0x400FE348 // Low Pin Count Interface + // Peripheral Present +#define SYSCTL_PPPECI 0x400FE350 // Platform Environment Control + // Interface Peripheral Present +#define SYSCTL_PPFAN 0x400FE354 // Fan Control Peripheral Present +#define SYSCTL_PPEEPROM 0x400FE358 // EEPROM Peripheral Present +#define SYSCTL_PPWTIMER 0x400FE35C // 32/64-Bit Wide General-Purpose + // Timer Peripheral Present +#define SYSCTL_PPRTS 0x400FE370 // Remote Temperature Sensor + // Peripheral Present +#define SYSCTL_PPCCM 0x400FE374 // CRC and Cryptographic Modules + // Peripheral Present +#define SYSCTL_PPLCD 0x400FE390 // LCD Peripheral Present +#define SYSCTL_PPOWIRE 0x400FE398 // 1-Wire Peripheral Present +#define SYSCTL_PPEMAC 0x400FE39C // Ethernet MAC Peripheral Present +#define SYSCTL_PPHIM 0x400FE3A4 // Human Interface Master + // Peripheral Present +#define SYSCTL_SRWD 0x400FE500 // Watchdog Timer Software Reset +#define SYSCTL_SRTIMER 0x400FE504 // 16/32-Bit General-Purpose Timer + // Software Reset +#define SYSCTL_SRGPIO 0x400FE508 // General-Purpose Input/Output + // Software Reset +#define SYSCTL_SRDMA 0x400FE50C // Micro Direct Memory Access + // Software Reset +#define SYSCTL_SREPI 0x400FE510 // EPI Software Reset +#define SYSCTL_SRHIB 0x400FE514 // Hibernation Software Reset +#define SYSCTL_SRUART 0x400FE518 // Universal Asynchronous + // Receiver/Transmitter Software + // Reset +#define SYSCTL_SRSSI 0x400FE51C // Synchronous Serial Interface + // Software Reset +#define SYSCTL_SRI2C 0x400FE520 // Inter-Integrated Circuit + // Software Reset +#define SYSCTL_SRUSB 0x400FE528 // Universal Serial Bus Software + // Reset +#define SYSCTL_SREPHY 0x400FE530 // Ethernet PHY Software Reset +#define SYSCTL_SRCAN 0x400FE534 // Controller Area Network Software + // Reset +#define SYSCTL_SRADC 0x400FE538 // Analog-to-Digital Converter + // Software Reset +#define SYSCTL_SRACMP 0x400FE53C // Analog Comparator Software Reset +#define SYSCTL_SRPWM 0x400FE540 // Pulse Width Modulator Software + // Reset +#define SYSCTL_SRQEI 0x400FE544 // Quadrature Encoder Interface + // Software Reset +#define SYSCTL_SREEPROM 0x400FE558 // EEPROM Software Reset +#define SYSCTL_SRWTIMER 0x400FE55C // 32/64-Bit Wide General-Purpose + // Timer Software Reset +#define SYSCTL_SRCCM 0x400FE574 // CRC and Cryptographic Modules + // Software Reset +#define SYSCTL_SRLCD 0x400FE590 // LCD Controller Software Reset +#define SYSCTL_SROWIRE 0x400FE598 // 1-Wire Software Reset +#define SYSCTL_SREMAC 0x400FE59C // Ethernet MAC Software Reset +#define SYSCTL_RCGCWD 0x400FE600 // Watchdog Timer Run Mode Clock + // Gating Control +#define SYSCTL_RCGCTIMER 0x400FE604 // 16/32-Bit General-Purpose Timer + // Run Mode Clock Gating Control +#define SYSCTL_RCGCGPIO 0x400FE608 // General-Purpose Input/Output Run + // Mode Clock Gating Control +#define SYSCTL_RCGCDMA 0x400FE60C // Micro Direct Memory Access Run + // Mode Clock Gating Control +#define SYSCTL_RCGCEPI 0x400FE610 // EPI Run Mode Clock Gating + // Control +#define SYSCTL_RCGCHIB 0x400FE614 // Hibernation Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART 0x400FE618 // Universal Asynchronous + // Receiver/Transmitter Run Mode + // Clock Gating Control +#define SYSCTL_RCGCSSI 0x400FE61C // Synchronous Serial Interface Run + // Mode Clock Gating Control +#define SYSCTL_RCGCI2C 0x400FE620 // Inter-Integrated Circuit Run + // Mode Clock Gating Control +#define SYSCTL_RCGCUSB 0x400FE628 // Universal Serial Bus Run Mode + // Clock Gating Control +#define SYSCTL_RCGCEPHY 0x400FE630 // Ethernet PHY Run Mode Clock + // Gating Control +#define SYSCTL_RCGCCAN 0x400FE634 // Controller Area Network Run Mode + // Clock Gating Control +#define SYSCTL_RCGCADC 0x400FE638 // Analog-to-Digital Converter Run + // Mode Clock Gating Control +#define SYSCTL_RCGCACMP 0x400FE63C // Analog Comparator Run Mode Clock + // Gating Control +#define SYSCTL_RCGCPWM 0x400FE640 // Pulse Width Modulator Run Mode + // Clock Gating Control +#define SYSCTL_RCGCQEI 0x400FE644 // Quadrature Encoder Interface Run + // Mode Clock Gating Control +#define SYSCTL_RCGCEEPROM 0x400FE658 // EEPROM Run Mode Clock Gating + // Control +#define SYSCTL_RCGCWTIMER 0x400FE65C // 32/64-Bit Wide General-Purpose + // Timer Run Mode Clock Gating + // Control +#define SYSCTL_RCGCCCM 0x400FE674 // CRC and Cryptographic Modules + // Run Mode Clock Gating Control +#define SYSCTL_RCGCLCD 0x400FE690 // LCD Controller Run Mode Clock + // Gating Control +#define SYSCTL_RCGCOWIRE 0x400FE698 // 1-Wire Run Mode Clock Gating + // Control +#define SYSCTL_RCGCEMAC 0x400FE69C // Ethernet MAC Run Mode Clock + // Gating Control +#define SYSCTL_SCGCWD 0x400FE700 // Watchdog Timer Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCTIMER 0x400FE704 // 16/32-Bit General-Purpose Timer + // Sleep Mode Clock Gating Control +#define SYSCTL_SCGCGPIO 0x400FE708 // General-Purpose Input/Output + // Sleep Mode Clock Gating Control +#define SYSCTL_SCGCDMA 0x400FE70C // Micro Direct Memory Access Sleep + // Mode Clock Gating Control +#define SYSCTL_SCGCEPI 0x400FE710 // EPI Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCHIB 0x400FE714 // Hibernation Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART 0x400FE718 // Universal Asynchronous + // Receiver/Transmitter Sleep Mode + // Clock Gating Control +#define SYSCTL_SCGCSSI 0x400FE71C // Synchronous Serial Interface + // Sleep Mode Clock Gating Control +#define SYSCTL_SCGCI2C 0x400FE720 // Inter-Integrated Circuit Sleep + // Mode Clock Gating Control +#define SYSCTL_SCGCUSB 0x400FE728 // Universal Serial Bus Sleep Mode + // Clock Gating Control +#define SYSCTL_SCGCEPHY 0x400FE730 // Ethernet PHY Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCCAN 0x400FE734 // Controller Area Network Sleep + // Mode Clock Gating Control +#define SYSCTL_SCGCADC 0x400FE738 // Analog-to-Digital Converter + // Sleep Mode Clock Gating Control +#define SYSCTL_SCGCACMP 0x400FE73C // Analog Comparator Sleep Mode + // Clock Gating Control +#define SYSCTL_SCGCPWM 0x400FE740 // Pulse Width Modulator Sleep Mode + // Clock Gating Control +#define SYSCTL_SCGCQEI 0x400FE744 // Quadrature Encoder Interface + // Sleep Mode Clock Gating Control +#define SYSCTL_SCGCEEPROM 0x400FE758 // EEPROM Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCWTIMER 0x400FE75C // 32/64-Bit Wide General-Purpose + // Timer Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCCCM 0x400FE774 // CRC and Cryptographic Modules + // Sleep Mode Clock Gating Control +#define SYSCTL_SCGCLCD 0x400FE790 // LCD Controller Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCOWIRE 0x400FE798 // 1-Wire Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCEMAC 0x400FE79C // Ethernet MAC Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCWD 0x400FE800 // Watchdog Timer Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCTIMER 0x400FE804 // 16/32-Bit General-Purpose Timer + // Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCGPIO 0x400FE808 // General-Purpose Input/Output + // Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCDMA 0x400FE80C // Micro Direct Memory Access + // Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCEPI 0x400FE810 // EPI Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCHIB 0x400FE814 // Hibernation Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART 0x400FE818 // Universal Asynchronous + // Receiver/Transmitter Deep-Sleep + // Mode Clock Gating Control +#define SYSCTL_DCGCSSI 0x400FE81C // Synchronous Serial Interface + // Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCI2C 0x400FE820 // Inter-Integrated Circuit + // Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCUSB 0x400FE828 // Universal Serial Bus Deep-Sleep + // Mode Clock Gating Control +#define SYSCTL_DCGCEPHY 0x400FE830 // Ethernet PHY Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCCAN 0x400FE834 // Controller Area Network + // Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCADC 0x400FE838 // Analog-to-Digital Converter + // Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCACMP 0x400FE83C // Analog Comparator Deep-Sleep + // Mode Clock Gating Control +#define SYSCTL_DCGCPWM 0x400FE840 // Pulse Width Modulator Deep-Sleep + // Mode Clock Gating Control +#define SYSCTL_DCGCQEI 0x400FE844 // Quadrature Encoder Interface + // Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCEEPROM 0x400FE858 // EEPROM Deep-Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCWTIMER 0x400FE85C // 32/64-Bit Wide General-Purpose + // Timer Deep-Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCCCM 0x400FE874 // CRC and Cryptographic Modules + // Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCLCD 0x400FE890 // LCD Controller Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCOWIRE 0x400FE898 // 1-Wire Deep-Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCEMAC 0x400FE89C // Ethernet MAC Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_PCWD 0x400FE900 // Watchdog Timer Power Control +#define SYSCTL_PCTIMER 0x400FE904 // 16/32-Bit General-Purpose Timer + // Power Control +#define SYSCTL_PCGPIO 0x400FE908 // General-Purpose Input/Output + // Power Control +#define SYSCTL_PCDMA 0x400FE90C // Micro Direct Memory Access Power + // Control +#define SYSCTL_PCEPI 0x400FE910 // External Peripheral Interface + // Power Control +#define SYSCTL_PCHIB 0x400FE914 // Hibernation Power Control +#define SYSCTL_PCUART 0x400FE918 // Universal Asynchronous + // Receiver/Transmitter Power + // Control +#define SYSCTL_PCSSI 0x400FE91C // Synchronous Serial Interface + // Power Control +#define SYSCTL_PCI2C 0x400FE920 // Inter-Integrated Circuit Power + // Control +#define SYSCTL_PCUSB 0x400FE928 // Universal Serial Bus Power + // Control +#define SYSCTL_PCEPHY 0x400FE930 // Ethernet PHY Power Control +#define SYSCTL_PCCAN 0x400FE934 // Controller Area Network Power + // Control +#define SYSCTL_PCADC 0x400FE938 // Analog-to-Digital Converter + // Power Control +#define SYSCTL_PCACMP 0x400FE93C // Analog Comparator Power Control +#define SYSCTL_PCPWM 0x400FE940 // Pulse Width Modulator Power + // Control +#define SYSCTL_PCQEI 0x400FE944 // Quadrature Encoder Interface + // Power Control +#define SYSCTL_PCEEPROM 0x400FE958 // EEPROM Power Control +#define SYSCTL_PCCCM 0x400FE974 // CRC and Cryptographic Modules + // Power Control +#define SYSCTL_PCLCD 0x400FE990 // LCD Controller Power Control +#define SYSCTL_PCOWIRE 0x400FE998 // 1-Wire Power Control +#define SYSCTL_PCEMAC 0x400FE99C // Ethernet MAC Power Control +#define SYSCTL_PRWD 0x400FEA00 // Watchdog Timer Peripheral Ready +#define SYSCTL_PRTIMER 0x400FEA04 // 16/32-Bit General-Purpose Timer + // Peripheral Ready +#define SYSCTL_PRGPIO 0x400FEA08 // General-Purpose Input/Output + // Peripheral Ready +#define SYSCTL_PRDMA 0x400FEA0C // Micro Direct Memory Access + // Peripheral Ready +#define SYSCTL_PREPI 0x400FEA10 // EPI Peripheral Ready +#define SYSCTL_PRHIB 0x400FEA14 // Hibernation Peripheral Ready +#define SYSCTL_PRUART 0x400FEA18 // Universal Asynchronous + // Receiver/Transmitter Peripheral + // Ready +#define SYSCTL_PRSSI 0x400FEA1C // Synchronous Serial Interface + // Peripheral Ready +#define SYSCTL_PRI2C 0x400FEA20 // Inter-Integrated Circuit + // Peripheral Ready +#define SYSCTL_PRUSB 0x400FEA28 // Universal Serial Bus Peripheral + // Ready +#define SYSCTL_PREPHY 0x400FEA30 // Ethernet PHY Peripheral Ready +#define SYSCTL_PRCAN 0x400FEA34 // Controller Area Network + // Peripheral Ready +#define SYSCTL_PRADC 0x400FEA38 // Analog-to-Digital Converter + // Peripheral Ready +#define SYSCTL_PRACMP 0x400FEA3C // Analog Comparator Peripheral + // Ready +#define SYSCTL_PRPWM 0x400FEA40 // Pulse Width Modulator Peripheral + // Ready +#define SYSCTL_PRQEI 0x400FEA44 // Quadrature Encoder Interface + // Peripheral Ready +#define SYSCTL_PREEPROM 0x400FEA58 // EEPROM Peripheral Ready +#define SYSCTL_PRWTIMER 0x400FEA5C // 32/64-Bit Wide General-Purpose + // Timer Peripheral Ready +#define SYSCTL_PRCCM 0x400FEA74 // CRC and Cryptographic Modules + // Peripheral Ready +#define SYSCTL_PRLCD 0x400FEA90 // LCD Controller Peripheral Ready +#define SYSCTL_PROWIRE 0x400FEA98 // 1-Wire Peripheral Ready +#define SYSCTL_PREMAC 0x400FEA9C // Ethernet MAC Peripheral Ready +#define SYSCTL_UNIQUEID0 0x400FEF20 // Unique ID 0 +#define SYSCTL_UNIQUEID1 0x400FEF24 // Unique ID 1 +#define SYSCTL_UNIQUEID2 0x400FEF28 // Unique ID 2 +#define SYSCTL_UNIQUEID3 0x400FEF2C // Unique ID 3 +#define SYSCTL_CCMCGREQ 0x44030204 // Cryptographic Modules Clock + // Gating Request + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DID0 register. +// +//***************************************************************************** +#define SYSCTL_DID0_VER_M 0x70000000 // DID0 Version +#define SYSCTL_DID0_VER_1 0x10000000 // Second version of the DID0 + // register format. +#define SYSCTL_DID0_CLASS_M 0x00FF0000 // Device Class +#define SYSCTL_DID0_CLASS_TM4C123 \ + 0x00050000 // Tiva TM4C123x and TM4E123x + // microcontrollers +#define SYSCTL_DID0_CLASS_TM4C129 \ + 0x000A0000 // Tiva(TM) TM4C129-class + // microcontrollers +#define SYSCTL_DID0_MAJ_M 0x0000FF00 // Major Revision +#define SYSCTL_DID0_MAJ_REVA 0x00000000 // Revision A (initial device) +#define SYSCTL_DID0_MAJ_REVB 0x00000100 // Revision B (first base layer + // revision) +#define SYSCTL_DID0_MAJ_REVC 0x00000200 // Revision C (second base layer + // revision) +#define SYSCTL_DID0_MIN_M 0x000000FF // Minor Revision +#define SYSCTL_DID0_MIN_0 0x00000000 // Initial device, or a major + // revision update +#define SYSCTL_DID0_MIN_1 0x00000001 // First metal layer change +#define SYSCTL_DID0_MIN_2 0x00000002 // Second metal layer change + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DID1 register. +// +//***************************************************************************** +#define SYSCTL_DID1_VER_M 0xF0000000 // DID1 Version +#define SYSCTL_DID1_VER_1 0x10000000 // fury_ib +#define SYSCTL_DID1_FAM_M 0x0F000000 // Family +#define SYSCTL_DID1_FAM_TIVA 0x00000000 // Tiva family of microcontollers +#define SYSCTL_DID1_PRTNO_M 0x00FF0000 // Part Number +#define SYSCTL_DID1_PRTNO_TM4C1230C3PM \ + 0x00220000 // TM4C1230C3PM +#define SYSCTL_DID1_PRTNO_TM4C1230D5PM \ + 0x00230000 // TM4C1230D5PM +#define SYSCTL_DID1_PRTNO_TM4C1230E6PM \ + 0x00200000 // TM4C1230E6PM +#define SYSCTL_DID1_PRTNO_TM4C1230H6PM \ + 0x00210000 // TM4C1230H6PM +#define SYSCTL_DID1_PRTNO_TM4C1231C3PM \ + 0x00180000 // TM4C1231C3PM +#define SYSCTL_DID1_PRTNO_TM4C1231D5PM \ + 0x00190000 // TM4C1231D5PM +#define SYSCTL_DID1_PRTNO_TM4C1231D5PZ \ + 0x00360000 // TM4C1231D5PZ +#define SYSCTL_DID1_PRTNO_TM4C1231E6PM \ + 0x00100000 // TM4C1231E6PM +#define SYSCTL_DID1_PRTNO_TM4C1231E6PZ \ + 0x00300000 // TM4C1231E6PZ +#define SYSCTL_DID1_PRTNO_TM4C1231H6PGE \ + 0x00350000 // TM4C1231H6PGE +#define SYSCTL_DID1_PRTNO_TM4C1231H6PM \ + 0x00110000 // TM4C1231H6PM +#define SYSCTL_DID1_PRTNO_TM4C1231H6PZ \ + 0x00310000 // TM4C1231H6PZ +#define SYSCTL_DID1_PRTNO_TM4C1232C3PM \ + 0x00080000 // TM4C1232C3PM +#define SYSCTL_DID1_PRTNO_TM4C1232D5PM \ + 0x00090000 // TM4C1232D5PM +#define SYSCTL_DID1_PRTNO_TM4C1232E6PM \ + 0x000A0000 // TM4C1232E6PM +#define SYSCTL_DID1_PRTNO_TM4C1232H6PM \ + 0x000B0000 // TM4C1232H6PM +#define SYSCTL_DID1_PRTNO_TM4C1233C3PM \ + 0x00010000 // TM4C1233C3PM +#define SYSCTL_DID1_PRTNO_TM4C1233D5PM \ + 0x00020000 // TM4C1233D5PM +#define SYSCTL_DID1_PRTNO_TM4C1233D5PZ \ + 0x00D00000 // TM4C1233D5PZ +#define SYSCTL_DID1_PRTNO_TM4C1233E6PM \ + 0x00030000 // TM4C1233E6PM +#define SYSCTL_DID1_PRTNO_TM4C1233E6PZ \ + 0x00D10000 // TM4C1233E6PZ +#define SYSCTL_DID1_PRTNO_TM4C1233H6PGE \ + 0x00D60000 // TM4C1233H6PGE +#define SYSCTL_DID1_PRTNO_TM4C1233H6PM \ + 0x00040000 // TM4C1233H6PM +#define SYSCTL_DID1_PRTNO_TM4C1233H6PZ \ + 0x00D20000 // TM4C1233H6PZ +#define SYSCTL_DID1_PRTNO_TM4C1236D5PM \ + 0x00520000 // TM4C1236D5PM +#define SYSCTL_DID1_PRTNO_TM4C1236E6PM \ + 0x00500000 // TM4C1236E6PM +#define SYSCTL_DID1_PRTNO_TM4C1236H6PM \ + 0x00510000 // TM4C1236H6PM +#define SYSCTL_DID1_PRTNO_TM4C1237D5PM \ + 0x00480000 // TM4C1237D5PM +#define SYSCTL_DID1_PRTNO_TM4C1237D5PZ \ + 0x00660000 // TM4C1237D5PZ +#define SYSCTL_DID1_PRTNO_TM4C1237E6PM \ + 0x00400000 // TM4C1237E6PM +#define SYSCTL_DID1_PRTNO_TM4C1237E6PZ \ + 0x00600000 // TM4C1237E6PZ +#define SYSCTL_DID1_PRTNO_TM4C1237H6PGE \ + 0x00650000 // TM4C1237H6PGE +#define SYSCTL_DID1_PRTNO_TM4C1237H6PM \ + 0x00410000 // TM4C1237H6PM +#define SYSCTL_DID1_PRTNO_TM4C1237H6PZ \ + 0x00610000 // TM4C1237H6PZ +#define SYSCTL_DID1_PRTNO_TM4C123AE6PM \ + 0x00800000 // TM4C123AE6PM +#define SYSCTL_DID1_PRTNO_TM4C123AH6PM \ + 0x00830000 // TM4C123AH6PM +#define SYSCTL_DID1_PRTNO_TM4C123BE6PM \ + 0x00700000 // TM4C123BE6PM +#define SYSCTL_DID1_PRTNO_TM4C123BE6PZ \ + 0x00C30000 // TM4C123BE6PZ +#define SYSCTL_DID1_PRTNO_TM4C123BH6PGE \ + 0x00C60000 // TM4C123BH6PGE +#define SYSCTL_DID1_PRTNO_TM4C123BH6PM \ + 0x00730000 // TM4C123BH6PM +#define SYSCTL_DID1_PRTNO_TM4C123BH6PZ \ + 0x00C40000 // TM4C123BH6PZ +#define SYSCTL_DID1_PRTNO_TM4C123BH6ZRB \ + 0x00E90000 // TM4C123BH6ZRB +#define SYSCTL_DID1_PRTNO_TM4C123FE6PM \ + 0x00B00000 // TM4C123FE6PM +#define SYSCTL_DID1_PRTNO_TM4C123FH6PM \ + 0x00B10000 // TM4C123FH6PM +#define SYSCTL_DID1_PRTNO_TM4C123GE6PM \ + 0x00A00000 // TM4C123GE6PM +#define SYSCTL_DID1_PRTNO_TM4C123GE6PZ \ + 0x00C00000 // TM4C123GE6PZ +#define SYSCTL_DID1_PRTNO_TM4C123GH6PGE \ + 0x00C50000 // TM4C123GH6PGE +#define SYSCTL_DID1_PRTNO_TM4C123GH6PM \ + 0x00A10000 // TM4C123GH6PM +#define SYSCTL_DID1_PRTNO_TM4C123GH6PZ \ + 0x00C10000 // TM4C123GH6PZ +#define SYSCTL_DID1_PRTNO_TM4C123GH6ZRB \ + 0x00E30000 // TM4C123GH6ZRB +#define SYSCTL_DID1_PRTNO_TM4C1290NCPDT \ + 0x00190000 // TM4C1290NCPDT +#define SYSCTL_DID1_PRTNO_TM4C1290NCZAD \ + 0x001B0000 // TM4C1290NCZAD +#define SYSCTL_DID1_PRTNO_TM4C1292NCPDT \ + 0x001C0000 // TM4C1292NCPDT +#define SYSCTL_DID1_PRTNO_TM4C1292NCZAD \ + 0x001E0000 // TM4C1292NCZAD +#define SYSCTL_DID1_PRTNO_TM4C1294KCPDT \ + 0x00340000 // TM4C1294KCPDT +#define SYSCTL_DID1_PRTNO_TM4C1294NCPDT \ + 0x001F0000 // TM4C1294NCPDT +#define SYSCTL_DID1_PRTNO_TM4C1294NCZAD \ + 0x00210000 // TM4C1294NCZAD +#define SYSCTL_DID1_PRTNO_TM4C1297NCZAD \ + 0x00220000 // TM4C1297NCZAD +#define SYSCTL_DID1_PRTNO_TM4C1299KCZAD \ + 0x00360000 // TM4C1299KCZAD +#define SYSCTL_DID1_PRTNO_TM4C1299NCZAD \ + 0x00230000 // TM4C1299NCZAD +#define SYSCTL_DID1_PRTNO_TM4C129CNCPDT \ + 0x00240000 // TM4C129CNCPDT +#define SYSCTL_DID1_PRTNO_TM4C129CNCZAD \ + 0x00260000 // TM4C129CNCZAD +#define SYSCTL_DID1_PRTNO_TM4C129DNCPDT \ + 0x00270000 // TM4C129DNCPDT +#define SYSCTL_DID1_PRTNO_TM4C129DNCZAD \ + 0x00290000 // TM4C129DNCZAD +#define SYSCTL_DID1_PRTNO_TM4C129EKCPDT \ + 0x00350000 // TM4C129EKCPDT +#define SYSCTL_DID1_PRTNO_TM4C129ENCPDT \ + 0x002D0000 // TM4C129ENCPDT +#define SYSCTL_DID1_PRTNO_TM4C129ENCZAD \ + 0x002F0000 // TM4C129ENCZAD +#define SYSCTL_DID1_PRTNO_TM4C129LNCZAD \ + 0x00300000 // TM4C129LNCZAD +#define SYSCTL_DID1_PRTNO_TM4C129XKCZAD \ + 0x00370000 // TM4C129XKCZAD +#define SYSCTL_DID1_PRTNO_TM4C129XNCZAD \ + 0x00320000 // TM4C129XNCZAD +#define SYSCTL_DID1_PINCNT_M 0x0000E000 // Package Pin Count +#define SYSCTL_DID1_PINCNT_100 0x00004000 // 100-pin LQFP package +#define SYSCTL_DID1_PINCNT_64 0x00006000 // 64-pin LQFP package +#define SYSCTL_DID1_PINCNT_144 0x00008000 // 144-pin LQFP package +#define SYSCTL_DID1_PINCNT_157 0x0000A000 // 157-pin BGA package +#define SYSCTL_DID1_PINCNT_128 0x0000C000 // 128-pin TQFP package +#define SYSCTL_DID1_TEMP_M 0x000000E0 // Temperature Range +#define SYSCTL_DID1_TEMP_C 0x00000000 // Commercial temperature range +#define SYSCTL_DID1_TEMP_I 0x00000020 // Industrial temperature range +#define SYSCTL_DID1_TEMP_E 0x00000040 // Extended temperature range +#define SYSCTL_DID1_TEMP_IE 0x00000060 // Available in both industrial + // temperature range (-40C to 85C) + // and extended temperature range + // (-40C to 105C) devices. See +#define SYSCTL_DID1_PKG_M 0x00000018 // Package Type +#define SYSCTL_DID1_PKG_QFP 0x00000008 // QFP package +#define SYSCTL_DID1_PKG_BGA 0x00000010 // BGA package +#define SYSCTL_DID1_ROHS 0x00000004 // RoHS-Compliance +#define SYSCTL_DID1_QUAL_M 0x00000003 // Qualification Status +#define SYSCTL_DID1_QUAL_ES 0x00000000 // Engineering Sample (unqualified) +#define SYSCTL_DID1_QUAL_PP 0x00000001 // Pilot Production (unqualified) +#define SYSCTL_DID1_QUAL_FQ 0x00000002 // Fully Qualified + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC0 register. +// +//***************************************************************************** +#define SYSCTL_DC0_SRAMSZ_M 0xFFFF0000 // SRAM Size +#define SYSCTL_DC0_SRAMSZ_2KB 0x00070000 // 2 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_4KB 0x000F0000 // 4 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_6KB 0x00170000 // 6 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_8KB 0x001F0000 // 8 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_12KB 0x002F0000 // 12 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_16KB 0x003F0000 // 16 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_20KB 0x004F0000 // 20 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_24KB 0x005F0000 // 24 KB of SRAM +#define SYSCTL_DC0_SRAMSZ_32KB 0x007F0000 // 32 KB of SRAM +#define SYSCTL_DC0_FLASHSZ_M 0x0000FFFF // Flash Size +#define SYSCTL_DC0_FLASHSZ_8KB 0x00000003 // 8 KB of Flash +#define SYSCTL_DC0_FLASHSZ_16KB 0x00000007 // 16 KB of Flash +#define SYSCTL_DC0_FLASHSZ_32KB 0x0000000F // 32 KB of Flash +#define SYSCTL_DC0_FLASHSZ_64KB 0x0000001F // 64 KB of Flash +#define SYSCTL_DC0_FLASHSZ_96KB 0x0000002F // 96 KB of Flash +#define SYSCTL_DC0_FLASHSZ_128K 0x0000003F // 128 KB of Flash +#define SYSCTL_DC0_FLASHSZ_192K 0x0000005F // 192 KB of Flash +#define SYSCTL_DC0_FLASHSZ_256K 0x0000007F // 256 KB of Flash + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC1 register. +// +//***************************************************************************** +#define SYSCTL_DC1_WDT1 0x10000000 // Watchdog Timer1 Present +#define SYSCTL_DC1_CAN1 0x02000000 // CAN Module 1 Present +#define SYSCTL_DC1_CAN0 0x01000000 // CAN Module 0 Present +#define SYSCTL_DC1_PWM1 0x00200000 // PWM Module 1 Present +#define SYSCTL_DC1_PWM0 0x00100000 // PWM Module 0 Present +#define SYSCTL_DC1_ADC1 0x00020000 // ADC Module 1 Present +#define SYSCTL_DC1_ADC0 0x00010000 // ADC Module 0 Present +#define SYSCTL_DC1_MINSYSDIV_M 0x0000F000 // System Clock Divider +#define SYSCTL_DC1_MINSYSDIV_80 0x00002000 // Specifies an 80-MHz CPU clock + // with a PLL divider of 2.5 +#define SYSCTL_DC1_MINSYSDIV_50 0x00003000 // Specifies a 50-MHz CPU clock + // with a PLL divider of 4 +#define SYSCTL_DC1_MINSYSDIV_40 0x00004000 // Specifies a 40-MHz CPU clock + // with a PLL divider of 5 +#define SYSCTL_DC1_MINSYSDIV_25 0x00007000 // Specifies a 25-MHz clock with a + // PLL divider of 8 +#define SYSCTL_DC1_MINSYSDIV_20 0x00009000 // Specifies a 20-MHz clock with a + // PLL divider of 10 +#define SYSCTL_DC1_ADC1SPD_M 0x00000C00 // Max ADC1 Speed +#define SYSCTL_DC1_ADC1SPD_125K 0x00000000 // 125K samples/second +#define SYSCTL_DC1_ADC1SPD_250K 0x00000400 // 250K samples/second +#define SYSCTL_DC1_ADC1SPD_500K 0x00000800 // 500K samples/second +#define SYSCTL_DC1_ADC1SPD_1M 0x00000C00 // 1M samples/second +#define SYSCTL_DC1_ADC0SPD_M 0x00000300 // Max ADC0 Speed +#define SYSCTL_DC1_ADC0SPD_125K 0x00000000 // 125K samples/second +#define SYSCTL_DC1_ADC0SPD_250K 0x00000100 // 250K samples/second +#define SYSCTL_DC1_ADC0SPD_500K 0x00000200 // 500K samples/second +#define SYSCTL_DC1_ADC0SPD_1M 0x00000300 // 1M samples/second +#define SYSCTL_DC1_MPU 0x00000080 // MPU Present +#define SYSCTL_DC1_HIB 0x00000040 // Hibernation Module Present +#define SYSCTL_DC1_TEMP 0x00000020 // Temp Sensor Present +#define SYSCTL_DC1_PLL 0x00000010 // PLL Present +#define SYSCTL_DC1_WDT0 0x00000008 // Watchdog Timer 0 Present +#define SYSCTL_DC1_SWO 0x00000004 // SWO Trace Port Present +#define SYSCTL_DC1_SWD 0x00000002 // SWD Present +#define SYSCTL_DC1_JTAG 0x00000001 // JTAG Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC2 register. +// +//***************************************************************************** +#define SYSCTL_DC2_EPI0 0x40000000 // EPI Module 0 Present +#define SYSCTL_DC2_I2S0 0x10000000 // I2S Module 0 Present +#define SYSCTL_DC2_COMP2 0x04000000 // Analog Comparator 2 Present +#define SYSCTL_DC2_COMP1 0x02000000 // Analog Comparator 1 Present +#define SYSCTL_DC2_COMP0 0x01000000 // Analog Comparator 0 Present +#define SYSCTL_DC2_TIMER3 0x00080000 // Timer Module 3 Present +#define SYSCTL_DC2_TIMER2 0x00040000 // Timer Module 2 Present +#define SYSCTL_DC2_TIMER1 0x00020000 // Timer Module 1 Present +#define SYSCTL_DC2_TIMER0 0x00010000 // Timer Module 0 Present +#define SYSCTL_DC2_I2C1HS 0x00008000 // I2C Module 1 Speed +#define SYSCTL_DC2_I2C1 0x00004000 // I2C Module 1 Present +#define SYSCTL_DC2_I2C0HS 0x00002000 // I2C Module 0 Speed +#define SYSCTL_DC2_I2C0 0x00001000 // I2C Module 0 Present +#define SYSCTL_DC2_QEI1 0x00000200 // QEI Module 1 Present +#define SYSCTL_DC2_QEI0 0x00000100 // QEI Module 0 Present +#define SYSCTL_DC2_SSI1 0x00000020 // SSI Module 1 Present +#define SYSCTL_DC2_SSI0 0x00000010 // SSI Module 0 Present +#define SYSCTL_DC2_UART2 0x00000004 // UART Module 2 Present +#define SYSCTL_DC2_UART1 0x00000002 // UART Module 1 Present +#define SYSCTL_DC2_UART0 0x00000001 // UART Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC3 register. +// +//***************************************************************************** +#define SYSCTL_DC3_32KHZ 0x80000000 // 32KHz Input Clock Available +#define SYSCTL_DC3_CCP5 0x20000000 // T2CCP1 Pin Present +#define SYSCTL_DC3_CCP4 0x10000000 // T2CCP0 Pin Present +#define SYSCTL_DC3_CCP3 0x08000000 // T1CCP1 Pin Present +#define SYSCTL_DC3_CCP2 0x04000000 // T1CCP0 Pin Present +#define SYSCTL_DC3_CCP1 0x02000000 // T0CCP1 Pin Present +#define SYSCTL_DC3_CCP0 0x01000000 // T0CCP0 Pin Present +#define SYSCTL_DC3_ADC0AIN7 0x00800000 // ADC Module 0 AIN7 Pin Present +#define SYSCTL_DC3_ADC0AIN6 0x00400000 // ADC Module 0 AIN6 Pin Present +#define SYSCTL_DC3_ADC0AIN5 0x00200000 // ADC Module 0 AIN5 Pin Present +#define SYSCTL_DC3_ADC0AIN4 0x00100000 // ADC Module 0 AIN4 Pin Present +#define SYSCTL_DC3_ADC0AIN3 0x00080000 // ADC Module 0 AIN3 Pin Present +#define SYSCTL_DC3_ADC0AIN2 0x00040000 // ADC Module 0 AIN2 Pin Present +#define SYSCTL_DC3_ADC0AIN1 0x00020000 // ADC Module 0 AIN1 Pin Present +#define SYSCTL_DC3_ADC0AIN0 0x00010000 // ADC Module 0 AIN0 Pin Present +#define SYSCTL_DC3_PWMFAULT 0x00008000 // PWM Fault Pin Present +#define SYSCTL_DC3_C2O 0x00004000 // C2o Pin Present +#define SYSCTL_DC3_C2PLUS 0x00002000 // C2+ Pin Present +#define SYSCTL_DC3_C2MINUS 0x00001000 // C2- Pin Present +#define SYSCTL_DC3_C1O 0x00000800 // C1o Pin Present +#define SYSCTL_DC3_C1PLUS 0x00000400 // C1+ Pin Present +#define SYSCTL_DC3_C1MINUS 0x00000200 // C1- Pin Present +#define SYSCTL_DC3_C0O 0x00000100 // C0o Pin Present +#define SYSCTL_DC3_C0PLUS 0x00000080 // C0+ Pin Present +#define SYSCTL_DC3_C0MINUS 0x00000040 // C0- Pin Present +#define SYSCTL_DC3_PWM5 0x00000020 // PWM5 Pin Present +#define SYSCTL_DC3_PWM4 0x00000010 // PWM4 Pin Present +#define SYSCTL_DC3_PWM3 0x00000008 // PWM3 Pin Present +#define SYSCTL_DC3_PWM2 0x00000004 // PWM2 Pin Present +#define SYSCTL_DC3_PWM1 0x00000002 // PWM1 Pin Present +#define SYSCTL_DC3_PWM0 0x00000001 // PWM0 Pin Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC4 register. +// +//***************************************************************************** +#define SYSCTL_DC4_EPHY0 0x40000000 // Ethernet PHY Layer 0 Present +#define SYSCTL_DC4_EMAC0 0x10000000 // Ethernet MAC Layer 0 Present +#define SYSCTL_DC4_E1588 0x01000000 // 1588 Capable +#define SYSCTL_DC4_PICAL 0x00040000 // PIOSC Calibrate +#define SYSCTL_DC4_CCP7 0x00008000 // T3CCP1 Pin Present +#define SYSCTL_DC4_CCP6 0x00004000 // T3CCP0 Pin Present +#define SYSCTL_DC4_UDMA 0x00002000 // Micro-DMA Module Present +#define SYSCTL_DC4_ROM 0x00001000 // Internal Code ROM Present +#define SYSCTL_DC4_GPIOJ 0x00000100 // GPIO Port J Present +#define SYSCTL_DC4_GPIOH 0x00000080 // GPIO Port H Present +#define SYSCTL_DC4_GPIOG 0x00000040 // GPIO Port G Present +#define SYSCTL_DC4_GPIOF 0x00000020 // GPIO Port F Present +#define SYSCTL_DC4_GPIOE 0x00000010 // GPIO Port E Present +#define SYSCTL_DC4_GPIOD 0x00000008 // GPIO Port D Present +#define SYSCTL_DC4_GPIOC 0x00000004 // GPIO Port C Present +#define SYSCTL_DC4_GPIOB 0x00000002 // GPIO Port B Present +#define SYSCTL_DC4_GPIOA 0x00000001 // GPIO Port A Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC5 register. +// +//***************************************************************************** +#define SYSCTL_DC5_PWMFAULT3 0x08000000 // PWM Fault 3 Pin Present +#define SYSCTL_DC5_PWMFAULT2 0x04000000 // PWM Fault 2 Pin Present +#define SYSCTL_DC5_PWMFAULT1 0x02000000 // PWM Fault 1 Pin Present +#define SYSCTL_DC5_PWMFAULT0 0x01000000 // PWM Fault 0 Pin Present +#define SYSCTL_DC5_PWMEFLT 0x00200000 // PWM Extended Fault Active +#define SYSCTL_DC5_PWMESYNC 0x00100000 // PWM Extended SYNC Active +#define SYSCTL_DC5_PWM7 0x00000080 // PWM7 Pin Present +#define SYSCTL_DC5_PWM6 0x00000040 // PWM6 Pin Present +#define SYSCTL_DC5_PWM5 0x00000020 // PWM5 Pin Present +#define SYSCTL_DC5_PWM4 0x00000010 // PWM4 Pin Present +#define SYSCTL_DC5_PWM3 0x00000008 // PWM3 Pin Present +#define SYSCTL_DC5_PWM2 0x00000004 // PWM2 Pin Present +#define SYSCTL_DC5_PWM1 0x00000002 // PWM1 Pin Present +#define SYSCTL_DC5_PWM0 0x00000001 // PWM0 Pin Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC6 register. +// +//***************************************************************************** +#define SYSCTL_DC6_USB0PHY 0x00000010 // USB Module 0 PHY Present +#define SYSCTL_DC6_USB0_M 0x00000003 // USB Module 0 Present +#define SYSCTL_DC6_USB0_DEV 0x00000001 // USB0 is Device Only +#define SYSCTL_DC6_USB0_HOSTDEV 0x00000002 // USB is Device or Host +#define SYSCTL_DC6_USB0_OTG 0x00000003 // USB0 is OTG + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC7 register. +// +//***************************************************************************** +#define SYSCTL_DC7_DMACH30 0x40000000 // DMA Channel 30 +#define SYSCTL_DC7_DMACH29 0x20000000 // DMA Channel 29 +#define SYSCTL_DC7_DMACH28 0x10000000 // DMA Channel 28 +#define SYSCTL_DC7_DMACH27 0x08000000 // DMA Channel 27 +#define SYSCTL_DC7_DMACH26 0x04000000 // DMA Channel 26 +#define SYSCTL_DC7_DMACH25 0x02000000 // DMA Channel 25 +#define SYSCTL_DC7_DMACH24 0x01000000 // DMA Channel 24 +#define SYSCTL_DC7_DMACH23 0x00800000 // DMA Channel 23 +#define SYSCTL_DC7_DMACH22 0x00400000 // DMA Channel 22 +#define SYSCTL_DC7_DMACH21 0x00200000 // DMA Channel 21 +#define SYSCTL_DC7_DMACH20 0x00100000 // DMA Channel 20 +#define SYSCTL_DC7_DMACH19 0x00080000 // DMA Channel 19 +#define SYSCTL_DC7_DMACH18 0x00040000 // DMA Channel 18 +#define SYSCTL_DC7_DMACH17 0x00020000 // DMA Channel 17 +#define SYSCTL_DC7_DMACH16 0x00010000 // DMA Channel 16 +#define SYSCTL_DC7_DMACH15 0x00008000 // DMA Channel 15 +#define SYSCTL_DC7_DMACH14 0x00004000 // DMA Channel 14 +#define SYSCTL_DC7_DMACH13 0x00002000 // DMA Channel 13 +#define SYSCTL_DC7_DMACH12 0x00001000 // DMA Channel 12 +#define SYSCTL_DC7_DMACH11 0x00000800 // DMA Channel 11 +#define SYSCTL_DC7_DMACH10 0x00000400 // DMA Channel 10 +#define SYSCTL_DC7_DMACH9 0x00000200 // DMA Channel 9 +#define SYSCTL_DC7_DMACH8 0x00000100 // DMA Channel 8 +#define SYSCTL_DC7_DMACH7 0x00000080 // DMA Channel 7 +#define SYSCTL_DC7_DMACH6 0x00000040 // DMA Channel 6 +#define SYSCTL_DC7_DMACH5 0x00000020 // DMA Channel 5 +#define SYSCTL_DC7_DMACH4 0x00000010 // DMA Channel 4 +#define SYSCTL_DC7_DMACH3 0x00000008 // DMA Channel 3 +#define SYSCTL_DC7_DMACH2 0x00000004 // DMA Channel 2 +#define SYSCTL_DC7_DMACH1 0x00000002 // DMA Channel 1 +#define SYSCTL_DC7_DMACH0 0x00000001 // DMA Channel 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC8 register. +// +//***************************************************************************** +#define SYSCTL_DC8_ADC1AIN15 0x80000000 // ADC Module 1 AIN15 Pin Present +#define SYSCTL_DC8_ADC1AIN14 0x40000000 // ADC Module 1 AIN14 Pin Present +#define SYSCTL_DC8_ADC1AIN13 0x20000000 // ADC Module 1 AIN13 Pin Present +#define SYSCTL_DC8_ADC1AIN12 0x10000000 // ADC Module 1 AIN12 Pin Present +#define SYSCTL_DC8_ADC1AIN11 0x08000000 // ADC Module 1 AIN11 Pin Present +#define SYSCTL_DC8_ADC1AIN10 0x04000000 // ADC Module 1 AIN10 Pin Present +#define SYSCTL_DC8_ADC1AIN9 0x02000000 // ADC Module 1 AIN9 Pin Present +#define SYSCTL_DC8_ADC1AIN8 0x01000000 // ADC Module 1 AIN8 Pin Present +#define SYSCTL_DC8_ADC1AIN7 0x00800000 // ADC Module 1 AIN7 Pin Present +#define SYSCTL_DC8_ADC1AIN6 0x00400000 // ADC Module 1 AIN6 Pin Present +#define SYSCTL_DC8_ADC1AIN5 0x00200000 // ADC Module 1 AIN5 Pin Present +#define SYSCTL_DC8_ADC1AIN4 0x00100000 // ADC Module 1 AIN4 Pin Present +#define SYSCTL_DC8_ADC1AIN3 0x00080000 // ADC Module 1 AIN3 Pin Present +#define SYSCTL_DC8_ADC1AIN2 0x00040000 // ADC Module 1 AIN2 Pin Present +#define SYSCTL_DC8_ADC1AIN1 0x00020000 // ADC Module 1 AIN1 Pin Present +#define SYSCTL_DC8_ADC1AIN0 0x00010000 // ADC Module 1 AIN0 Pin Present +#define SYSCTL_DC8_ADC0AIN15 0x00008000 // ADC Module 0 AIN15 Pin Present +#define SYSCTL_DC8_ADC0AIN14 0x00004000 // ADC Module 0 AIN14 Pin Present +#define SYSCTL_DC8_ADC0AIN13 0x00002000 // ADC Module 0 AIN13 Pin Present +#define SYSCTL_DC8_ADC0AIN12 0x00001000 // ADC Module 0 AIN12 Pin Present +#define SYSCTL_DC8_ADC0AIN11 0x00000800 // ADC Module 0 AIN11 Pin Present +#define SYSCTL_DC8_ADC0AIN10 0x00000400 // ADC Module 0 AIN10 Pin Present +#define SYSCTL_DC8_ADC0AIN9 0x00000200 // ADC Module 0 AIN9 Pin Present +#define SYSCTL_DC8_ADC0AIN8 0x00000100 // ADC Module 0 AIN8 Pin Present +#define SYSCTL_DC8_ADC0AIN7 0x00000080 // ADC Module 0 AIN7 Pin Present +#define SYSCTL_DC8_ADC0AIN6 0x00000040 // ADC Module 0 AIN6 Pin Present +#define SYSCTL_DC8_ADC0AIN5 0x00000020 // ADC Module 0 AIN5 Pin Present +#define SYSCTL_DC8_ADC0AIN4 0x00000010 // ADC Module 0 AIN4 Pin Present +#define SYSCTL_DC8_ADC0AIN3 0x00000008 // ADC Module 0 AIN3 Pin Present +#define SYSCTL_DC8_ADC0AIN2 0x00000004 // ADC Module 0 AIN2 Pin Present +#define SYSCTL_DC8_ADC0AIN1 0x00000002 // ADC Module 0 AIN1 Pin Present +#define SYSCTL_DC8_ADC0AIN0 0x00000001 // ADC Module 0 AIN0 Pin Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PBORCTL register. +// +//***************************************************************************** +#define SYSCTL_PBORCTL_BOR0 0x00000004 // VDD under BOR0 Event Action +#define SYSCTL_PBORCTL_BOR1 0x00000002 // VDD under BOR1 Event Action + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PTBOCTL register. +// +//***************************************************************************** +#define SYSCTL_PTBOCTL_VDDA_UBOR_M \ + 0x00000300 // VDDA under BOR Event Action +#define SYSCTL_PTBOCTL_VDDA_UBOR_NONE \ + 0x00000000 // No Action +#define SYSCTL_PTBOCTL_VDDA_UBOR_SYSINT \ + 0x00000100 // System control interrupt +#define SYSCTL_PTBOCTL_VDDA_UBOR_NMI \ + 0x00000200 // NMI +#define SYSCTL_PTBOCTL_VDDA_UBOR_RST \ + 0x00000300 // Reset +#define SYSCTL_PTBOCTL_VDD_UBOR_M \ + 0x00000003 // VDD (VDDS) under BOR Event + // Action +#define SYSCTL_PTBOCTL_VDD_UBOR_NONE \ + 0x00000000 // No Action +#define SYSCTL_PTBOCTL_VDD_UBOR_SYSINT \ + 0x00000001 // System control interrupt +#define SYSCTL_PTBOCTL_VDD_UBOR_NMI \ + 0x00000002 // NMI +#define SYSCTL_PTBOCTL_VDD_UBOR_RST \ + 0x00000003 // Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCR0 register. +// +//***************************************************************************** +#define SYSCTL_SRCR0_WDT1 0x10000000 // WDT1 Reset Control +#define SYSCTL_SRCR0_CAN1 0x02000000 // CAN1 Reset Control +#define SYSCTL_SRCR0_CAN0 0x01000000 // CAN0 Reset Control +#define SYSCTL_SRCR0_PWM0 0x00100000 // PWM Reset Control +#define SYSCTL_SRCR0_ADC1 0x00020000 // ADC1 Reset Control +#define SYSCTL_SRCR0_ADC0 0x00010000 // ADC0 Reset Control +#define SYSCTL_SRCR0_HIB 0x00000040 // HIB Reset Control +#define SYSCTL_SRCR0_WDT0 0x00000008 // WDT0 Reset Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCR1 register. +// +//***************************************************************************** +#define SYSCTL_SRCR1_COMP2 0x04000000 // Analog Comp 2 Reset Control +#define SYSCTL_SRCR1_COMP1 0x02000000 // Analog Comp 1 Reset Control +#define SYSCTL_SRCR1_COMP0 0x01000000 // Analog Comp 0 Reset Control +#define SYSCTL_SRCR1_TIMER3 0x00080000 // Timer 3 Reset Control +#define SYSCTL_SRCR1_TIMER2 0x00040000 // Timer 2 Reset Control +#define SYSCTL_SRCR1_TIMER1 0x00020000 // Timer 1 Reset Control +#define SYSCTL_SRCR1_TIMER0 0x00010000 // Timer 0 Reset Control +#define SYSCTL_SRCR1_I2C1 0x00004000 // I2C1 Reset Control +#define SYSCTL_SRCR1_I2C0 0x00001000 // I2C0 Reset Control +#define SYSCTL_SRCR1_QEI1 0x00000200 // QEI1 Reset Control +#define SYSCTL_SRCR1_QEI0 0x00000100 // QEI0 Reset Control +#define SYSCTL_SRCR1_SSI1 0x00000020 // SSI1 Reset Control +#define SYSCTL_SRCR1_SSI0 0x00000010 // SSI0 Reset Control +#define SYSCTL_SRCR1_UART2 0x00000004 // UART2 Reset Control +#define SYSCTL_SRCR1_UART1 0x00000002 // UART1 Reset Control +#define SYSCTL_SRCR1_UART0 0x00000001 // UART0 Reset Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCR2 register. +// +//***************************************************************************** +#define SYSCTL_SRCR2_USB0 0x00010000 // USB0 Reset Control +#define SYSCTL_SRCR2_UDMA 0x00002000 // Micro-DMA Reset Control +#define SYSCTL_SRCR2_GPIOJ 0x00000100 // Port J Reset Control +#define SYSCTL_SRCR2_GPIOH 0x00000080 // Port H Reset Control +#define SYSCTL_SRCR2_GPIOG 0x00000040 // Port G Reset Control +#define SYSCTL_SRCR2_GPIOF 0x00000020 // Port F Reset Control +#define SYSCTL_SRCR2_GPIOE 0x00000010 // Port E Reset Control +#define SYSCTL_SRCR2_GPIOD 0x00000008 // Port D Reset Control +#define SYSCTL_SRCR2_GPIOC 0x00000004 // Port C Reset Control +#define SYSCTL_SRCR2_GPIOB 0x00000002 // Port B Reset Control +#define SYSCTL_SRCR2_GPIOA 0x00000001 // Port A Reset Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RIS register. +// +//***************************************************************************** +#define SYSCTL_RIS_BOR0RIS 0x00000800 // VDD under BOR0 Raw Interrupt + // Status +#define SYSCTL_RIS_VDDARIS 0x00000400 // VDDA Power OK Event Raw + // Interrupt Status +#define SYSCTL_RIS_MOSCPUPRIS 0x00000100 // MOSC Power Up Raw Interrupt + // Status +#define SYSCTL_RIS_USBPLLLRIS 0x00000080 // USB PLL Lock Raw Interrupt + // Status +#define SYSCTL_RIS_PLLLRIS 0x00000040 // PLL Lock Raw Interrupt Status +#define SYSCTL_RIS_MOFRIS 0x00000008 // Main Oscillator Failure Raw + // Interrupt Status +#define SYSCTL_RIS_BOR1RIS 0x00000002 // VDD under BOR1 Raw Interrupt + // Status +#define SYSCTL_RIS_BORRIS 0x00000002 // Brown-Out Reset Raw Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_IMC register. +// +//***************************************************************************** +#define SYSCTL_IMC_BOR0IM 0x00000800 // VDD under BOR0 Interrupt Mask +#define SYSCTL_IMC_VDDAIM 0x00000400 // VDDA Power OK Interrupt Mask +#define SYSCTL_IMC_MOSCPUPIM 0x00000100 // MOSC Power Up Interrupt Mask +#define SYSCTL_IMC_USBPLLLIM 0x00000080 // USB PLL Lock Interrupt Mask +#define SYSCTL_IMC_PLLLIM 0x00000040 // PLL Lock Interrupt Mask +#define SYSCTL_IMC_MOFIM 0x00000008 // Main Oscillator Failure + // Interrupt Mask +#define SYSCTL_IMC_BORIM 0x00000002 // Brown-Out Reset Interrupt Mask +#define SYSCTL_IMC_BOR1IM 0x00000002 // VDD under BOR1 Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_MISC register. +// +//***************************************************************************** +#define SYSCTL_MISC_BOR0MIS 0x00000800 // VDD under BOR0 Masked Interrupt + // Status +#define SYSCTL_MISC_VDDAMIS 0x00000400 // VDDA Power OK Masked Interrupt + // Status +#define SYSCTL_MISC_MOSCPUPMIS 0x00000100 // MOSC Power Up Masked Interrupt + // Status +#define SYSCTL_MISC_USBPLLLMIS 0x00000080 // USB PLL Lock Masked Interrupt + // Status +#define SYSCTL_MISC_PLLLMIS 0x00000040 // PLL Lock Masked Interrupt Status +#define SYSCTL_MISC_MOFMIS 0x00000008 // Main Oscillator Failure Masked + // Interrupt Status +#define SYSCTL_MISC_BORMIS 0x00000002 // BOR Masked Interrupt Status +#define SYSCTL_MISC_BOR1MIS 0x00000002 // VDD under BOR1 Masked Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RESC register. +// +//***************************************************************************** +#define SYSCTL_RESC_MOSCFAIL 0x00010000 // MOSC Failure Reset +#define SYSCTL_RESC_HSSR 0x00001000 // HSSR Reset +#define SYSCTL_RESC_WDT1 0x00000020 // Watchdog Timer 1 Reset +#define SYSCTL_RESC_SW 0x00000010 // Software Reset +#define SYSCTL_RESC_WDT0 0x00000008 // Watchdog Timer 0 Reset +#define SYSCTL_RESC_BOR 0x00000004 // Brown-Out Reset +#define SYSCTL_RESC_POR 0x00000002 // Power-On Reset +#define SYSCTL_RESC_EXT 0x00000001 // External Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PWRTC register. +// +//***************************************************************************** +#define SYSCTL_PWRTC_VDDA_UBOR 0x00000010 // VDDA Under BOR Status +#define SYSCTL_PWRTC_VDD_UBOR 0x00000001 // VDD Under BOR Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCC register. +// +//***************************************************************************** +#define SYSCTL_RCC_ACG 0x08000000 // Auto Clock Gating +#define SYSCTL_RCC_SYSDIV_M 0x07800000 // System Clock Divisor +#define SYSCTL_RCC_USESYSDIV 0x00400000 // Enable System Clock Divider +#define SYSCTL_RCC_USEPWMDIV 0x00100000 // Enable PWM Clock Divisor +#define SYSCTL_RCC_PWMDIV_M 0x000E0000 // PWM Unit Clock Divisor +#define SYSCTL_RCC_PWMDIV_2 0x00000000 // PWM clock /2 +#define SYSCTL_RCC_PWMDIV_4 0x00020000 // PWM clock /4 +#define SYSCTL_RCC_PWMDIV_8 0x00040000 // PWM clock /8 +#define SYSCTL_RCC_PWMDIV_16 0x00060000 // PWM clock /16 +#define SYSCTL_RCC_PWMDIV_32 0x00080000 // PWM clock /32 +#define SYSCTL_RCC_PWMDIV_64 0x000A0000 // PWM clock /64 +#define SYSCTL_RCC_PWRDN 0x00002000 // PLL Power Down +#define SYSCTL_RCC_BYPASS 0x00000800 // PLL Bypass +#define SYSCTL_RCC_XTAL_M 0x000007C0 // Crystal Value +#define SYSCTL_RCC_XTAL_4MHZ 0x00000180 // 4 MHz +#define SYSCTL_RCC_XTAL_4_09MHZ 0x000001C0 // 4.096 MHz +#define SYSCTL_RCC_XTAL_4_91MHZ 0x00000200 // 4.9152 MHz +#define SYSCTL_RCC_XTAL_5MHZ 0x00000240 // 5 MHz +#define SYSCTL_RCC_XTAL_5_12MHZ 0x00000280 // 5.12 MHz +#define SYSCTL_RCC_XTAL_6MHZ 0x000002C0 // 6 MHz +#define SYSCTL_RCC_XTAL_6_14MHZ 0x00000300 // 6.144 MHz +#define SYSCTL_RCC_XTAL_7_37MHZ 0x00000340 // 7.3728 MHz +#define SYSCTL_RCC_XTAL_8MHZ 0x00000380 // 8 MHz +#define SYSCTL_RCC_XTAL_8_19MHZ 0x000003C0 // 8.192 MHz +#define SYSCTL_RCC_XTAL_10MHZ 0x00000400 // 10 MHz +#define SYSCTL_RCC_XTAL_12MHZ 0x00000440 // 12 MHz +#define SYSCTL_RCC_XTAL_12_2MHZ 0x00000480 // 12.288 MHz +#define SYSCTL_RCC_XTAL_13_5MHZ 0x000004C0 // 13.56 MHz +#define SYSCTL_RCC_XTAL_14_3MHZ 0x00000500 // 14.31818 MHz +#define SYSCTL_RCC_XTAL_16MHZ 0x00000540 // 16 MHz +#define SYSCTL_RCC_XTAL_16_3MHZ 0x00000580 // 16.384 MHz +#define SYSCTL_RCC_XTAL_18MHZ 0x000005C0 // 18.0 MHz (USB) +#define SYSCTL_RCC_XTAL_20MHZ 0x00000600 // 20.0 MHz (USB) +#define SYSCTL_RCC_XTAL_24MHZ 0x00000640 // 24.0 MHz (USB) +#define SYSCTL_RCC_XTAL_25MHZ 0x00000680 // 25.0 MHz (USB) +#define SYSCTL_RCC_OSCSRC_M 0x00000030 // Oscillator Source +#define SYSCTL_RCC_OSCSRC_MAIN 0x00000000 // MOSC +#define SYSCTL_RCC_OSCSRC_INT 0x00000010 // IOSC +#define SYSCTL_RCC_OSCSRC_INT4 0x00000020 // IOSC/4 +#define SYSCTL_RCC_OSCSRC_30 0x00000030 // LFIOSC +#define SYSCTL_RCC_MOSCDIS 0x00000001 // Main Oscillator Disable +#define SYSCTL_RCC_SYSDIV_S 23 +#define SYSCTL_RCC_XTAL_S 6 // Shift to the XTAL field + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_NMIC register. +// +//***************************************************************************** +#define SYSCTL_NMIC_MOSCFAIL 0x00010000 // MOSC Failure NMI +#define SYSCTL_NMIC_TAMPER 0x00000200 // Tamper Event NMI +#define SYSCTL_NMIC_WDT1 0x00000020 // Watch Dog Timer (WDT) 1 NMI +#define SYSCTL_NMIC_WDT0 0x00000008 // Watch Dog Timer (WDT) 0 NMI +#define SYSCTL_NMIC_POWER 0x00000004 // Power/Brown Out Event NMI +#define SYSCTL_NMIC_EXTERNAL 0x00000001 // External Pin NMI + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_GPIOHBCTL +// register. +// +//***************************************************************************** +#define SYSCTL_GPIOHBCTL_PORTJ 0x00000100 // Port J Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTH 0x00000080 // Port H Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTG 0x00000040 // Port G Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTF 0x00000020 // Port F Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTE 0x00000010 // Port E Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTD 0x00000008 // Port D Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTC 0x00000004 // Port C Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTB 0x00000002 // Port B Advanced High-Performance + // Bus +#define SYSCTL_GPIOHBCTL_PORTA 0x00000001 // Port A Advanced High-Performance + // Bus + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCC2 register. +// +//***************************************************************************** +#define SYSCTL_RCC2_USERCC2 0x80000000 // Use RCC2 +#define SYSCTL_RCC2_DIV400 0x40000000 // Divide PLL as 400 MHz vs. 200 + // MHz +#define SYSCTL_RCC2_SYSDIV2_M 0x1F800000 // System Clock Divisor 2 +#define SYSCTL_RCC2_SYSDIV2LSB 0x00400000 // Additional LSB for SYSDIV2 +#define SYSCTL_RCC2_USBPWRDN 0x00004000 // Power-Down USB PLL +#define SYSCTL_RCC2_PWRDN2 0x00002000 // Power-Down PLL 2 +#define SYSCTL_RCC2_BYPASS2 0x00000800 // PLL Bypass 2 +#define SYSCTL_RCC2_OSCSRC2_M 0x00000070 // Oscillator Source 2 +#define SYSCTL_RCC2_OSCSRC2_MO 0x00000000 // MOSC +#define SYSCTL_RCC2_OSCSRC2_IO 0x00000010 // PIOSC +#define SYSCTL_RCC2_OSCSRC2_IO4 0x00000020 // PIOSC/4 +#define SYSCTL_RCC2_OSCSRC2_30 0x00000030 // LFIOSC +#define SYSCTL_RCC2_OSCSRC2_32 0x00000070 // 32.768 kHz +#define SYSCTL_RCC2_SYSDIV2_S 23 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_MOSCCTL register. +// +//***************************************************************************** +#define SYSCTL_MOSCCTL_OSCRNG 0x00000010 // Oscillator Range +#define SYSCTL_MOSCCTL_PWRDN 0x00000008 // Power Down +#define SYSCTL_MOSCCTL_NOXTAL 0x00000004 // No Crystal Connected +#define SYSCTL_MOSCCTL_MOSCIM 0x00000002 // MOSC Failure Action +#define SYSCTL_MOSCCTL_CVAL 0x00000001 // Clock Validation for MOSC + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RSCLKCFG +// register. +// +//***************************************************************************** +#define SYSCTL_RSCLKCFG_MEMTIMU 0x80000000 // Memory Timing Register Update +#define SYSCTL_RSCLKCFG_NEWFREQ 0x40000000 // New PLLFREQ Accept +#define SYSCTL_RSCLKCFG_ACG 0x20000000 // Auto Clock Gating +#define SYSCTL_RSCLKCFG_USEPLL 0x10000000 // Use PLL +#define SYSCTL_RSCLKCFG_PLLSRC_M \ + 0x0F000000 // PLL Source +#define SYSCTL_RSCLKCFG_PLLSRC_PIOSC \ + 0x00000000 // PIOSC is PLL input clock source +#define SYSCTL_RSCLKCFG_PLLSRC_MOSC \ + 0x03000000 // MOSC is the PLL input clock + // source +#define SYSCTL_RSCLKCFG_OSCSRC_M \ + 0x00F00000 // Oscillator Source +#define SYSCTL_RSCLKCFG_OSCSRC_PIOSC \ + 0x00000000 // PIOSC is oscillator source +#define SYSCTL_RSCLKCFG_OSCSRC_LFIOSC \ + 0x00200000 // LFIOSC is oscillator source +#define SYSCTL_RSCLKCFG_OSCSRC_MOSC \ + 0x00300000 // MOSC is oscillator source +#define SYSCTL_RSCLKCFG_OSCSRC_RTC \ + 0x00400000 // Hibernation Module RTC + // Oscillator (RTCOSC) +#define SYSCTL_RSCLKCFG_OSYSDIV_M \ + 0x000FFC00 // Oscillator System Clock Divisor +#define SYSCTL_RSCLKCFG_PSYSDIV_M \ + 0x000003FF // PLL System Clock Divisor +#define SYSCTL_RSCLKCFG_OSYSDIV_S \ + 10 +#define SYSCTL_RSCLKCFG_PSYSDIV_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_MEMTIM0 register. +// +//***************************************************************************** +#define SYSCTL_MEMTIM0_EBCHT_M 0x03C00000 // EEPROM Clock High Time +#define SYSCTL_MEMTIM0_EBCHT_0_5 \ + 0x00000000 // 1/2 system clock period +#define SYSCTL_MEMTIM0_EBCHT_1 0x00400000 // 1 system clock period +#define SYSCTL_MEMTIM0_EBCHT_1_5 \ + 0x00800000 // 1.5 system clock periods +#define SYSCTL_MEMTIM0_EBCHT_2 0x00C00000 // 2 system clock periods +#define SYSCTL_MEMTIM0_EBCHT_2_5 \ + 0x01000000 // 2.5 system clock periods +#define SYSCTL_MEMTIM0_EBCHT_3 0x01400000 // 3 system clock periods +#define SYSCTL_MEMTIM0_EBCHT_3_5 \ + 0x01800000 // 3.5 system clock periods +#define SYSCTL_MEMTIM0_EBCHT_4 0x01C00000 // 4 system clock periods +#define SYSCTL_MEMTIM0_EBCHT_4_5 \ + 0x02000000 // 4.5 system clock periods +#define SYSCTL_MEMTIM0_EBCE 0x00200000 // EEPROM Bank Clock Edge +#define SYSCTL_MEMTIM0_MB1 0x00100010 // Must be one +#define SYSCTL_MEMTIM0_EWS_M 0x000F0000 // EEPROM Wait States +#define SYSCTL_MEMTIM0_FBCHT_M 0x000003C0 // Flash Bank Clock High Time +#define SYSCTL_MEMTIM0_FBCHT_0_5 \ + 0x00000000 // 1/2 system clock period +#define SYSCTL_MEMTIM0_FBCHT_1 0x00000040 // 1 system clock period +#define SYSCTL_MEMTIM0_FBCHT_1_5 \ + 0x00000080 // 1.5 system clock periods +#define SYSCTL_MEMTIM0_FBCHT_2 0x000000C0 // 2 system clock periods +#define SYSCTL_MEMTIM0_FBCHT_2_5 \ + 0x00000100 // 2.5 system clock periods +#define SYSCTL_MEMTIM0_FBCHT_3 0x00000140 // 3 system clock periods +#define SYSCTL_MEMTIM0_FBCHT_3_5 \ + 0x00000180 // 3.5 system clock periods +#define SYSCTL_MEMTIM0_FBCHT_4 0x000001C0 // 4 system clock periods +#define SYSCTL_MEMTIM0_FBCHT_4_5 \ + 0x00000200 // 4.5 system clock periods +#define SYSCTL_MEMTIM0_FBCE 0x00000020 // Flash Bank Clock Edge +#define SYSCTL_MEMTIM0_FWS_M 0x0000000F // Flash Wait State +#define SYSCTL_MEMTIM0_EWS_S 16 +#define SYSCTL_MEMTIM0_FWS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGC0 register. +// +//***************************************************************************** +#define SYSCTL_RCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control +#define SYSCTL_RCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control +#define SYSCTL_RCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control +#define SYSCTL_RCGC0_PWM0 0x00100000 // PWM Clock Gating Control +#define SYSCTL_RCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control +#define SYSCTL_RCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_RCGC0_ADC1SPD_M 0x00000C00 // ADC1 Sample Speed +#define SYSCTL_RCGC0_ADC1SPD_125K \ + 0x00000000 // 125K samples/second +#define SYSCTL_RCGC0_ADC1SPD_250K \ + 0x00000400 // 250K samples/second +#define SYSCTL_RCGC0_ADC1SPD_500K \ + 0x00000800 // 500K samples/second +#define SYSCTL_RCGC0_ADC1SPD_1M 0x00000C00 // 1M samples/second +#define SYSCTL_RCGC0_ADC0SPD_M 0x00000300 // ADC0 Sample Speed +#define SYSCTL_RCGC0_ADC0SPD_125K \ + 0x00000000 // 125K samples/second +#define SYSCTL_RCGC0_ADC0SPD_250K \ + 0x00000100 // 250K samples/second +#define SYSCTL_RCGC0_ADC0SPD_500K \ + 0x00000200 // 500K samples/second +#define SYSCTL_RCGC0_ADC0SPD_1M 0x00000300 // 1M samples/second +#define SYSCTL_RCGC0_HIB 0x00000040 // HIB Clock Gating Control +#define SYSCTL_RCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGC1 register. +// +//***************************************************************************** +#define SYSCTL_RCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating +#define SYSCTL_RCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating +#define SYSCTL_RCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating +#define SYSCTL_RCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control +#define SYSCTL_RCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control +#define SYSCTL_RCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control +#define SYSCTL_RCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control +#define SYSCTL_RCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control +#define SYSCTL_RCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control +#define SYSCTL_RCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control +#define SYSCTL_RCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control +#define SYSCTL_RCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control +#define SYSCTL_RCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control +#define SYSCTL_RCGC1_UART2 0x00000004 // UART2 Clock Gating Control +#define SYSCTL_RCGC1_UART1 0x00000002 // UART1 Clock Gating Control +#define SYSCTL_RCGC1_UART0 0x00000001 // UART0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGC2 register. +// +//***************************************************************************** +#define SYSCTL_RCGC2_USB0 0x00010000 // USB0 Clock Gating Control +#define SYSCTL_RCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control +#define SYSCTL_RCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control +#define SYSCTL_RCGC2_GPIOH 0x00000080 // Port H Clock Gating Control +#define SYSCTL_RCGC2_GPIOG 0x00000040 // Port G Clock Gating Control +#define SYSCTL_RCGC2_GPIOF 0x00000020 // Port F Clock Gating Control +#define SYSCTL_RCGC2_GPIOE 0x00000010 // Port E Clock Gating Control +#define SYSCTL_RCGC2_GPIOD 0x00000008 // Port D Clock Gating Control +#define SYSCTL_RCGC2_GPIOC 0x00000004 // Port C Clock Gating Control +#define SYSCTL_RCGC2_GPIOB 0x00000002 // Port B Clock Gating Control +#define SYSCTL_RCGC2_GPIOA 0x00000001 // Port A Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGC0 register. +// +//***************************************************************************** +#define SYSCTL_SCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control +#define SYSCTL_SCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control +#define SYSCTL_SCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control +#define SYSCTL_SCGC0_PWM0 0x00100000 // PWM Clock Gating Control +#define SYSCTL_SCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control +#define SYSCTL_SCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_SCGC0_ADCSPD_M 0x00000F00 // ADC Sample Speed +#define SYSCTL_SCGC0_HIB 0x00000040 // HIB Clock Gating Control +#define SYSCTL_SCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGC1 register. +// +//***************************************************************************** +#define SYSCTL_SCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating +#define SYSCTL_SCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating +#define SYSCTL_SCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating +#define SYSCTL_SCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control +#define SYSCTL_SCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control +#define SYSCTL_SCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control +#define SYSCTL_SCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control +#define SYSCTL_SCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control +#define SYSCTL_SCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control +#define SYSCTL_SCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control +#define SYSCTL_SCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control +#define SYSCTL_SCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control +#define SYSCTL_SCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control +#define SYSCTL_SCGC1_UART2 0x00000004 // UART2 Clock Gating Control +#define SYSCTL_SCGC1_UART1 0x00000002 // UART1 Clock Gating Control +#define SYSCTL_SCGC1_UART0 0x00000001 // UART0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGC2 register. +// +//***************************************************************************** +#define SYSCTL_SCGC2_USB0 0x00010000 // USB0 Clock Gating Control +#define SYSCTL_SCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control +#define SYSCTL_SCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control +#define SYSCTL_SCGC2_GPIOH 0x00000080 // Port H Clock Gating Control +#define SYSCTL_SCGC2_GPIOG 0x00000040 // Port G Clock Gating Control +#define SYSCTL_SCGC2_GPIOF 0x00000020 // Port F Clock Gating Control +#define SYSCTL_SCGC2_GPIOE 0x00000010 // Port E Clock Gating Control +#define SYSCTL_SCGC2_GPIOD 0x00000008 // Port D Clock Gating Control +#define SYSCTL_SCGC2_GPIOC 0x00000004 // Port C Clock Gating Control +#define SYSCTL_SCGC2_GPIOB 0x00000002 // Port B Clock Gating Control +#define SYSCTL_SCGC2_GPIOA 0x00000001 // Port A Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGC0 register. +// +//***************************************************************************** +#define SYSCTL_DCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control +#define SYSCTL_DCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control +#define SYSCTL_DCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control +#define SYSCTL_DCGC0_PWM0 0x00100000 // PWM Clock Gating Control +#define SYSCTL_DCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control +#define SYSCTL_DCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control +#define SYSCTL_DCGC0_HIB 0x00000040 // HIB Clock Gating Control +#define SYSCTL_DCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGC1 register. +// +//***************************************************************************** +#define SYSCTL_DCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating +#define SYSCTL_DCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating +#define SYSCTL_DCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating +#define SYSCTL_DCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control +#define SYSCTL_DCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control +#define SYSCTL_DCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control +#define SYSCTL_DCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control +#define SYSCTL_DCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control +#define SYSCTL_DCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control +#define SYSCTL_DCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control +#define SYSCTL_DCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control +#define SYSCTL_DCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control +#define SYSCTL_DCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control +#define SYSCTL_DCGC1_UART2 0x00000004 // UART2 Clock Gating Control +#define SYSCTL_DCGC1_UART1 0x00000002 // UART1 Clock Gating Control +#define SYSCTL_DCGC1_UART0 0x00000001 // UART0 Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGC2 register. +// +//***************************************************************************** +#define SYSCTL_DCGC2_USB0 0x00010000 // USB0 Clock Gating Control +#define SYSCTL_DCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control +#define SYSCTL_DCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control +#define SYSCTL_DCGC2_GPIOH 0x00000080 // Port H Clock Gating Control +#define SYSCTL_DCGC2_GPIOG 0x00000040 // Port G Clock Gating Control +#define SYSCTL_DCGC2_GPIOF 0x00000020 // Port F Clock Gating Control +#define SYSCTL_DCGC2_GPIOE 0x00000010 // Port E Clock Gating Control +#define SYSCTL_DCGC2_GPIOD 0x00000008 // Port D Clock Gating Control +#define SYSCTL_DCGC2_GPIOC 0x00000004 // Port C Clock Gating Control +#define SYSCTL_DCGC2_GPIOB 0x00000002 // Port B Clock Gating Control +#define SYSCTL_DCGC2_GPIOA 0x00000001 // Port A Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_ALTCLKCFG +// register. +// +//***************************************************************************** +#define SYSCTL_ALTCLKCFG_ALTCLK_M \ + 0x0000000F // Alternate Clock Source +#define SYSCTL_ALTCLKCFG_ALTCLK_PIOSC \ + 0x00000000 // PIOSC +#define SYSCTL_ALTCLKCFG_ALTCLK_RTCOSC \ + 0x00000003 // Hibernation Module Real-time + // clock output (RTCOSC) +#define SYSCTL_ALTCLKCFG_ALTCLK_LFIOSC \ + 0x00000004 // Low-frequency internal + // oscillator (LFIOSC) + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DSLPCLKCFG +// register. +// +//***************************************************************************** +#define SYSCTL_DSLPCLKCFG_D_M 0x1F800000 // Divider Field Override +#define SYSCTL_DSLPCLKCFG_O_M 0x00000070 // Clock Source +#define SYSCTL_DSLPCLKCFG_O_IGN 0x00000000 // MOSC +#define SYSCTL_DSLPCLKCFG_O_IO 0x00000010 // PIOSC +#define SYSCTL_DSLPCLKCFG_O_30 0x00000030 // LFIOSC +#define SYSCTL_DSLPCLKCFG_O_32 0x00000070 // 32.768 kHz +#define SYSCTL_DSLPCLKCFG_PIOSCPD \ + 0x00000002 // PIOSC Power Down Request +#define SYSCTL_DSLPCLKCFG_D_S 23 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DSCLKCFG +// register. +// +//***************************************************************************** +#define SYSCTL_DSCLKCFG_PIOSCPD 0x80000000 // PIOSC Power Down +#define SYSCTL_DSCLKCFG_MOSCDPD 0x40000000 // MOSC Disable Power Down +#define SYSCTL_DSCLKCFG_DSOSCSRC_M \ + 0x00F00000 // Deep Sleep Oscillator Source +#define SYSCTL_DSCLKCFG_DSOSCSRC_PIOSC \ + 0x00000000 // PIOSC +#define SYSCTL_DSCLKCFG_DSOSCSRC_LFIOSC \ + 0x00200000 // LFIOSC +#define SYSCTL_DSCLKCFG_DSOSCSRC_MOSC \ + 0x00300000 // MOSC +#define SYSCTL_DSCLKCFG_DSOSCSRC_RTC \ + 0x00400000 // Hibernation Module RTCOSC +#define SYSCTL_DSCLKCFG_DSSYSDIV_M \ + 0x000003FF // Deep Sleep Clock Divisor +#define SYSCTL_DSCLKCFG_DSSYSDIV_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DIVSCLK register. +// +//***************************************************************************** +#define SYSCTL_DIVSCLK_EN 0x80000000 // DIVSCLK Enable +#define SYSCTL_DIVSCLK_SRC_M 0x00030000 // Clock Source +#define SYSCTL_DIVSCLK_SRC_SYSCLK \ + 0x00000000 // System Clock +#define SYSCTL_DIVSCLK_SRC_PIOSC \ + 0x00010000 // PIOSC +#define SYSCTL_DIVSCLK_SRC_MOSC 0x00020000 // MOSC +#define SYSCTL_DIVSCLK_DIV_M 0x000000FF // Divisor Value +#define SYSCTL_DIVSCLK_DIV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SYSPROP register. +// +//***************************************************************************** +#define SYSCTL_SYSPROP_FPU 0x00000001 // FPU Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PIOSCCAL +// register. +// +//***************************************************************************** +#define SYSCTL_PIOSCCAL_UTEN 0x80000000 // Use User Trim Value +#define SYSCTL_PIOSCCAL_CAL 0x00000200 // Start Calibration +#define SYSCTL_PIOSCCAL_UPDATE 0x00000100 // Update Trim +#define SYSCTL_PIOSCCAL_UT_M 0x0000007F // User Trim Value +#define SYSCTL_PIOSCCAL_UT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PIOSCSTAT +// register. +// +//***************************************************************************** +#define SYSCTL_PIOSCSTAT_DT_M 0x007F0000 // Default Trim Value +#define SYSCTL_PIOSCSTAT_CR_M 0x00000300 // Calibration Result +#define SYSCTL_PIOSCSTAT_CRNONE 0x00000000 // Calibration has not been + // attempted +#define SYSCTL_PIOSCSTAT_CRPASS 0x00000100 // The last calibration operation + // completed to meet 1% accuracy +#define SYSCTL_PIOSCSTAT_CRFAIL 0x00000200 // The last calibration operation + // failed to meet 1% accuracy +#define SYSCTL_PIOSCSTAT_CT_M 0x0000007F // Calibration Trim Value +#define SYSCTL_PIOSCSTAT_DT_S 16 +#define SYSCTL_PIOSCSTAT_CT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PLLFREQ0 +// register. +// +//***************************************************************************** +#define SYSCTL_PLLFREQ0_PLLPWR 0x00800000 // PLL Power +#define SYSCTL_PLLFREQ0_MFRAC_M 0x000FFC00 // PLL M Fractional Value +#define SYSCTL_PLLFREQ0_MINT_M 0x000003FF // PLL M Integer Value +#define SYSCTL_PLLFREQ0_MFRAC_S 10 +#define SYSCTL_PLLFREQ0_MINT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PLLFREQ1 +// register. +// +//***************************************************************************** +#define SYSCTL_PLLFREQ1_Q_M 0x00001F00 // PLL Q Value +#define SYSCTL_PLLFREQ1_N_M 0x0000001F // PLL N Value +#define SYSCTL_PLLFREQ1_Q_S 8 +#define SYSCTL_PLLFREQ1_N_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PLLSTAT register. +// +//***************************************************************************** +#define SYSCTL_PLLSTAT_LOCK 0x00000001 // PLL Lock + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SLPPWRCFG +// register. +// +//***************************************************************************** +#define SYSCTL_SLPPWRCFG_FLASHPM_M \ + 0x00000030 // Flash Power Modes +#define SYSCTL_SLPPWRCFG_FLASHPM_NRM \ + 0x00000000 // Active Mode +#define SYSCTL_SLPPWRCFG_FLASHPM_SLP \ + 0x00000020 // Low Power Mode +#define SYSCTL_SLPPWRCFG_SRAMPM_M \ + 0x00000003 // SRAM Power Modes +#define SYSCTL_SLPPWRCFG_SRAMPM_NRM \ + 0x00000000 // Active Mode +#define SYSCTL_SLPPWRCFG_SRAMPM_SBY \ + 0x00000001 // Standby Mode +#define SYSCTL_SLPPWRCFG_SRAMPM_LP \ + 0x00000003 // Low Power Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DSLPPWRCFG +// register. +// +//***************************************************************************** +#define SYSCTL_DSLPPWRCFG_LDOSM 0x00000200 // LDO Sleep Mode +#define SYSCTL_DSLPPWRCFG_TSPD 0x00000100 // Temperature Sense Power Down +#define SYSCTL_DSLPPWRCFG_FLASHPM_M \ + 0x00000030 // Flash Power Modes +#define SYSCTL_DSLPPWRCFG_FLASHPM_NRM \ + 0x00000000 // Active Mode +#define SYSCTL_DSLPPWRCFG_FLASHPM_SLP \ + 0x00000020 // Low Power Mode +#define SYSCTL_DSLPPWRCFG_SRAMPM_M \ + 0x00000003 // SRAM Power Modes +#define SYSCTL_DSLPPWRCFG_SRAMPM_NRM \ + 0x00000000 // Active Mode +#define SYSCTL_DSLPPWRCFG_SRAMPM_SBY \ + 0x00000001 // Standby Mode +#define SYSCTL_DSLPPWRCFG_SRAMPM_LP \ + 0x00000003 // Low Power Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DC9 register. +// +//***************************************************************************** +#define SYSCTL_DC9_ADC1DC7 0x00800000 // ADC1 DC7 Present +#define SYSCTL_DC9_ADC1DC6 0x00400000 // ADC1 DC6 Present +#define SYSCTL_DC9_ADC1DC5 0x00200000 // ADC1 DC5 Present +#define SYSCTL_DC9_ADC1DC4 0x00100000 // ADC1 DC4 Present +#define SYSCTL_DC9_ADC1DC3 0x00080000 // ADC1 DC3 Present +#define SYSCTL_DC9_ADC1DC2 0x00040000 // ADC1 DC2 Present +#define SYSCTL_DC9_ADC1DC1 0x00020000 // ADC1 DC1 Present +#define SYSCTL_DC9_ADC1DC0 0x00010000 // ADC1 DC0 Present +#define SYSCTL_DC9_ADC0DC7 0x00000080 // ADC0 DC7 Present +#define SYSCTL_DC9_ADC0DC6 0x00000040 // ADC0 DC6 Present +#define SYSCTL_DC9_ADC0DC5 0x00000020 // ADC0 DC5 Present +#define SYSCTL_DC9_ADC0DC4 0x00000010 // ADC0 DC4 Present +#define SYSCTL_DC9_ADC0DC3 0x00000008 // ADC0 DC3 Present +#define SYSCTL_DC9_ADC0DC2 0x00000004 // ADC0 DC2 Present +#define SYSCTL_DC9_ADC0DC1 0x00000002 // ADC0 DC1 Present +#define SYSCTL_DC9_ADC0DC0 0x00000001 // ADC0 DC0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_NVMSTAT register. +// +//***************************************************************************** +#define SYSCTL_NVMSTAT_FWB 0x00000001 // 32 Word Flash Write Buffer + // Available + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_LDOSPCTL +// register. +// +//***************************************************************************** +#define SYSCTL_LDOSPCTL_VADJEN 0x80000000 // Voltage Adjust Enable +#define SYSCTL_LDOSPCTL_VLDO_M 0x000000FF // LDO Output Voltage +#define SYSCTL_LDOSPCTL_VLDO_0_90V \ + 0x00000012 // 0.90 V +#define SYSCTL_LDOSPCTL_VLDO_0_95V \ + 0x00000013 // 0.95 V +#define SYSCTL_LDOSPCTL_VLDO_1_00V \ + 0x00000014 // 1.00 V +#define SYSCTL_LDOSPCTL_VLDO_1_05V \ + 0x00000015 // 1.05 V +#define SYSCTL_LDOSPCTL_VLDO_1_10V \ + 0x00000016 // 1.10 V +#define SYSCTL_LDOSPCTL_VLDO_1_15V \ + 0x00000017 // 1.15 V +#define SYSCTL_LDOSPCTL_VLDO_1_20V \ + 0x00000018 // 1.20 V + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_LDODPCTL +// register. +// +//***************************************************************************** +#define SYSCTL_LDODPCTL_VADJEN 0x80000000 // Voltage Adjust Enable +#define SYSCTL_LDODPCTL_VLDO_M 0x000000FF // LDO Output Voltage +#define SYSCTL_LDODPCTL_VLDO_0_90V \ + 0x00000012 // 0.90 V +#define SYSCTL_LDODPCTL_VLDO_0_95V \ + 0x00000013 // 0.95 V +#define SYSCTL_LDODPCTL_VLDO_1_00V \ + 0x00000014 // 1.00 V +#define SYSCTL_LDODPCTL_VLDO_1_05V \ + 0x00000015 // 1.05 V +#define SYSCTL_LDODPCTL_VLDO_1_10V \ + 0x00000016 // 1.10 V +#define SYSCTL_LDODPCTL_VLDO_1_15V \ + 0x00000017 // 1.15 V +#define SYSCTL_LDODPCTL_VLDO_1_20V \ + 0x00000018 // 1.20 V +#define SYSCTL_LDODPCTL_VLDO_1_25V \ + 0x00000019 // 1.25 V +#define SYSCTL_LDODPCTL_VLDO_1_30V \ + 0x0000001A // 1.30 V +#define SYSCTL_LDODPCTL_VLDO_1_35V \ + 0x0000001B // 1.35 V + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RESBEHAVCTL +// register. +// +//***************************************************************************** +#define SYSCTL_RESBEHAVCTL_WDOG1_M \ + 0x000000C0 // Watchdog 1 Reset Operation +#define SYSCTL_RESBEHAVCTL_WDOG1_SYSRST \ + 0x00000080 // Watchdog 1 issues a system + // reset. The application starts + // within 10 us +#define SYSCTL_RESBEHAVCTL_WDOG1_POR \ + 0x000000C0 // Watchdog 1 issues a simulated + // POR sequence. Application starts + // less than 500 us after + // deassertion (Default) +#define SYSCTL_RESBEHAVCTL_WDOG0_M \ + 0x00000030 // Watchdog 0 Reset Operation +#define SYSCTL_RESBEHAVCTL_WDOG0_SYSRST \ + 0x00000020 // Watchdog 0 issues a system + // reset. The application starts + // within 10 us +#define SYSCTL_RESBEHAVCTL_WDOG0_POR \ + 0x00000030 // Watchdog 0 issues a simulated + // POR sequence. Application starts + // less than 500 us after + // deassertion (Default) +#define SYSCTL_RESBEHAVCTL_BOR_M \ + 0x0000000C // BOR Reset operation +#define SYSCTL_RESBEHAVCTL_BOR_SYSRST \ + 0x00000008 // Brown Out Reset issues system + // reset. The application starts + // within 10 us +#define SYSCTL_RESBEHAVCTL_BOR_POR \ + 0x0000000C // Brown Out Reset issues a + // simulated POR sequence. The + // application starts less than 500 + // us after deassertion (Default) +#define SYSCTL_RESBEHAVCTL_EXTRES_M \ + 0x00000003 // External RST Pin Operation +#define SYSCTL_RESBEHAVCTL_EXTRES_SYSRST \ + 0x00000002 // External RST assertion issues a + // system reset. The application + // starts within 10 us +#define SYSCTL_RESBEHAVCTL_EXTRES_POR \ + 0x00000003 // External RST assertion issues a + // simulated POR sequence. + // Application starts less than 500 + // us after deassertion (Default) + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_HSSR register. +// +//***************************************************************************** +#define SYSCTL_HSSR_KEY_M 0xFF000000 // Write Key +#define SYSCTL_HSSR_CDOFF_M 0x00FFFFFF // Command Descriptor Pointer +#define SYSCTL_HSSR_KEY_S 24 +#define SYSCTL_HSSR_CDOFF_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_USBPDS register. +// +//***************************************************************************** +#define SYSCTL_USBPDS_MEMSTAT_M 0x0000000C // Memory Array Power Status +#define SYSCTL_USBPDS_MEMSTAT_OFF \ + 0x00000000 // Array OFF +#define SYSCTL_USBPDS_MEMSTAT_RETAIN \ + 0x00000004 // SRAM Retention +#define SYSCTL_USBPDS_MEMSTAT_ON \ + 0x0000000C // Array On +#define SYSCTL_USBPDS_PWRSTAT_M 0x00000003 // Power Domain Status +#define SYSCTL_USBPDS_PWRSTAT_OFF \ + 0x00000000 // OFF +#define SYSCTL_USBPDS_PWRSTAT_ON \ + 0x00000003 // ON + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_USBMPC register. +// +//***************************************************************************** +#define SYSCTL_USBMPC_PWRCTL_M 0x00000003 // Memory Array Power Control +#define SYSCTL_USBMPC_PWRCTL_OFF \ + 0x00000000 // Array OFF +#define SYSCTL_USBMPC_PWRCTL_RETAIN \ + 0x00000001 // SRAM Retention +#define SYSCTL_USBMPC_PWRCTL_ON 0x00000003 // Array On + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_EMACPDS register. +// +//***************************************************************************** +#define SYSCTL_EMACPDS_MEMSTAT_M \ + 0x0000000C // Memory Array Power Status +#define SYSCTL_EMACPDS_MEMSTAT_OFF \ + 0x00000000 // Array OFF +#define SYSCTL_EMACPDS_MEMSTAT_ON \ + 0x0000000C // Array On +#define SYSCTL_EMACPDS_PWRSTAT_M \ + 0x00000003 // Power Domain Status +#define SYSCTL_EMACPDS_PWRSTAT_OFF \ + 0x00000000 // OFF +#define SYSCTL_EMACPDS_PWRSTAT_ON \ + 0x00000003 // ON + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_EMACMPC register. +// +//***************************************************************************** +#define SYSCTL_EMACMPC_PWRCTL_M 0x00000003 // Memory Array Power Control +#define SYSCTL_EMACMPC_PWRCTL_OFF \ + 0x00000000 // Array OFF +#define SYSCTL_EMACMPC_PWRCTL_ON \ + 0x00000003 // Array On + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_LCDMPC register. +// +//***************************************************************************** +#define SYSCTL_LCDMPC_PWRCTL_M 0x00000003 // Memory Array Power Control +#define SYSCTL_LCDMPC_PWRCTL_OFF \ + 0x00000000 // Array OFF +#define SYSCTL_LCDMPC_PWRCTL_ON 0x00000003 // Array On + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPWD register. +// +//***************************************************************************** +#define SYSCTL_PPWD_P1 0x00000002 // Watchdog Timer 1 Present +#define SYSCTL_PPWD_P0 0x00000001 // Watchdog Timer 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPTIMER register. +// +//***************************************************************************** +#define SYSCTL_PPTIMER_P7 0x00000080 // 16/32-Bit General-Purpose Timer + // 7 Present +#define SYSCTL_PPTIMER_P6 0x00000040 // 16/32-Bit General-Purpose Timer + // 6 Present +#define SYSCTL_PPTIMER_P5 0x00000020 // 16/32-Bit General-Purpose Timer + // 5 Present +#define SYSCTL_PPTIMER_P4 0x00000010 // 16/32-Bit General-Purpose Timer + // 4 Present +#define SYSCTL_PPTIMER_P3 0x00000008 // 16/32-Bit General-Purpose Timer + // 3 Present +#define SYSCTL_PPTIMER_P2 0x00000004 // 16/32-Bit General-Purpose Timer + // 2 Present +#define SYSCTL_PPTIMER_P1 0x00000002 // 16/32-Bit General-Purpose Timer + // 1 Present +#define SYSCTL_PPTIMER_P0 0x00000001 // 16/32-Bit General-Purpose Timer + // 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPGPIO register. +// +//***************************************************************************** +#define SYSCTL_PPGPIO_P17 0x00020000 // GPIO Port T Present +#define SYSCTL_PPGPIO_P16 0x00010000 // GPIO Port S Present +#define SYSCTL_PPGPIO_P15 0x00008000 // GPIO Port R Present +#define SYSCTL_PPGPIO_P14 0x00004000 // GPIO Port Q Present +#define SYSCTL_PPGPIO_P13 0x00002000 // GPIO Port P Present +#define SYSCTL_PPGPIO_P12 0x00001000 // GPIO Port N Present +#define SYSCTL_PPGPIO_P11 0x00000800 // GPIO Port M Present +#define SYSCTL_PPGPIO_P10 0x00000400 // GPIO Port L Present +#define SYSCTL_PPGPIO_P9 0x00000200 // GPIO Port K Present +#define SYSCTL_PPGPIO_P8 0x00000100 // GPIO Port J Present +#define SYSCTL_PPGPIO_P7 0x00000080 // GPIO Port H Present +#define SYSCTL_PPGPIO_P6 0x00000040 // GPIO Port G Present +#define SYSCTL_PPGPIO_P5 0x00000020 // GPIO Port F Present +#define SYSCTL_PPGPIO_P4 0x00000010 // GPIO Port E Present +#define SYSCTL_PPGPIO_P3 0x00000008 // GPIO Port D Present +#define SYSCTL_PPGPIO_P2 0x00000004 // GPIO Port C Present +#define SYSCTL_PPGPIO_P1 0x00000002 // GPIO Port B Present +#define SYSCTL_PPGPIO_P0 0x00000001 // GPIO Port A Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPDMA register. +// +//***************************************************************************** +#define SYSCTL_PPDMA_P0 0x00000001 // uDMA Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPEPI register. +// +//***************************************************************************** +#define SYSCTL_PPEPI_P0 0x00000001 // EPI Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPHIB register. +// +//***************************************************************************** +#define SYSCTL_PPHIB_P0 0x00000001 // Hibernation Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPUART register. +// +//***************************************************************************** +#define SYSCTL_PPUART_P7 0x00000080 // UART Module 7 Present +#define SYSCTL_PPUART_P6 0x00000040 // UART Module 6 Present +#define SYSCTL_PPUART_P5 0x00000020 // UART Module 5 Present +#define SYSCTL_PPUART_P4 0x00000010 // UART Module 4 Present +#define SYSCTL_PPUART_P3 0x00000008 // UART Module 3 Present +#define SYSCTL_PPUART_P2 0x00000004 // UART Module 2 Present +#define SYSCTL_PPUART_P1 0x00000002 // UART Module 1 Present +#define SYSCTL_PPUART_P0 0x00000001 // UART Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPSSI register. +// +//***************************************************************************** +#define SYSCTL_PPSSI_P3 0x00000008 // SSI Module 3 Present +#define SYSCTL_PPSSI_P2 0x00000004 // SSI Module 2 Present +#define SYSCTL_PPSSI_P1 0x00000002 // SSI Module 1 Present +#define SYSCTL_PPSSI_P0 0x00000001 // SSI Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPI2C register. +// +//***************************************************************************** +#define SYSCTL_PPI2C_P9 0x00000200 // I2C Module 9 Present +#define SYSCTL_PPI2C_P8 0x00000100 // I2C Module 8 Present +#define SYSCTL_PPI2C_P7 0x00000080 // I2C Module 7 Present +#define SYSCTL_PPI2C_P6 0x00000040 // I2C Module 6 Present +#define SYSCTL_PPI2C_P5 0x00000020 // I2C Module 5 Present +#define SYSCTL_PPI2C_P4 0x00000010 // I2C Module 4 Present +#define SYSCTL_PPI2C_P3 0x00000008 // I2C Module 3 Present +#define SYSCTL_PPI2C_P2 0x00000004 // I2C Module 2 Present +#define SYSCTL_PPI2C_P1 0x00000002 // I2C Module 1 Present +#define SYSCTL_PPI2C_P0 0x00000001 // I2C Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPUSB register. +// +//***************************************************************************** +#define SYSCTL_PPUSB_P0 0x00000001 // USB Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPEPHY register. +// +//***************************************************************************** +#define SYSCTL_PPEPHY_P0 0x00000001 // Ethernet PHY Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPCAN register. +// +//***************************************************************************** +#define SYSCTL_PPCAN_P1 0x00000002 // CAN Module 1 Present +#define SYSCTL_PPCAN_P0 0x00000001 // CAN Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPADC register. +// +//***************************************************************************** +#define SYSCTL_PPADC_P1 0x00000002 // ADC Module 1 Present +#define SYSCTL_PPADC_P0 0x00000001 // ADC Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPACMP register. +// +//***************************************************************************** +#define SYSCTL_PPACMP_P0 0x00000001 // Analog Comparator Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPPWM register. +// +//***************************************************************************** +#define SYSCTL_PPPWM_P1 0x00000002 // PWM Module 1 Present +#define SYSCTL_PPPWM_P0 0x00000001 // PWM Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPQEI register. +// +//***************************************************************************** +#define SYSCTL_PPQEI_P1 0x00000002 // QEI Module 1 Present +#define SYSCTL_PPQEI_P0 0x00000001 // QEI Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPLPC register. +// +//***************************************************************************** +#define SYSCTL_PPLPC_P0 0x00000001 // LPC Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPPECI register. +// +//***************************************************************************** +#define SYSCTL_PPPECI_P0 0x00000001 // PECI Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPFAN register. +// +//***************************************************************************** +#define SYSCTL_PPFAN_P0 0x00000001 // FAN Module 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPEEPROM +// register. +// +//***************************************************************************** +#define SYSCTL_PPEEPROM_P0 0x00000001 // EEPROM Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPWTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_PPWTIMER_P5 0x00000020 // 32/64-Bit Wide General-Purpose + // Timer 5 Present +#define SYSCTL_PPWTIMER_P4 0x00000010 // 32/64-Bit Wide General-Purpose + // Timer 4 Present +#define SYSCTL_PPWTIMER_P3 0x00000008 // 32/64-Bit Wide General-Purpose + // Timer 3 Present +#define SYSCTL_PPWTIMER_P2 0x00000004 // 32/64-Bit Wide General-Purpose + // Timer 2 Present +#define SYSCTL_PPWTIMER_P1 0x00000002 // 32/64-Bit Wide General-Purpose + // Timer 1 Present +#define SYSCTL_PPWTIMER_P0 0x00000001 // 32/64-Bit Wide General-Purpose + // Timer 0 Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPRTS register. +// +//***************************************************************************** +#define SYSCTL_PPRTS_P0 0x00000001 // RTS Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPCCM register. +// +//***************************************************************************** +#define SYSCTL_PPCCM_P0 0x00000001 // CRC and Cryptographic Modules + // Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPLCD register. +// +//***************************************************************************** +#define SYSCTL_PPLCD_P0 0x00000001 // LCD Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPOWIRE register. +// +//***************************************************************************** +#define SYSCTL_PPOWIRE_P0 0x00000001 // 1-Wire Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPEMAC register. +// +//***************************************************************************** +#define SYSCTL_PPEMAC_P0 0x00000001 // Ethernet Controller Module + // Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PPHIM register. +// +//***************************************************************************** +#define SYSCTL_PPHIM_P0 0x00000001 // HIM Module Present + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRWD register. +// +//***************************************************************************** +#define SYSCTL_SRWD_R1 0x00000002 // Watchdog Timer 1 Software Reset +#define SYSCTL_SRWD_R0 0x00000001 // Watchdog Timer 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRTIMER register. +// +//***************************************************************************** +#define SYSCTL_SRTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer + // 7 Software Reset +#define SYSCTL_SRTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer + // 6 Software Reset +#define SYSCTL_SRTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer + // 5 Software Reset +#define SYSCTL_SRTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer + // 4 Software Reset +#define SYSCTL_SRTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer + // 3 Software Reset +#define SYSCTL_SRTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer + // 2 Software Reset +#define SYSCTL_SRTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer + // 1 Software Reset +#define SYSCTL_SRTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer + // 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRGPIO register. +// +//***************************************************************************** +#define SYSCTL_SRGPIO_R17 0x00020000 // GPIO Port T Software Reset +#define SYSCTL_SRGPIO_R16 0x00010000 // GPIO Port S Software Reset +#define SYSCTL_SRGPIO_R15 0x00008000 // GPIO Port R Software Reset +#define SYSCTL_SRGPIO_R14 0x00004000 // GPIO Port Q Software Reset +#define SYSCTL_SRGPIO_R13 0x00002000 // GPIO Port P Software Reset +#define SYSCTL_SRGPIO_R12 0x00001000 // GPIO Port N Software Reset +#define SYSCTL_SRGPIO_R11 0x00000800 // GPIO Port M Software Reset +#define SYSCTL_SRGPIO_R10 0x00000400 // GPIO Port L Software Reset +#define SYSCTL_SRGPIO_R9 0x00000200 // GPIO Port K Software Reset +#define SYSCTL_SRGPIO_R8 0x00000100 // GPIO Port J Software Reset +#define SYSCTL_SRGPIO_R7 0x00000080 // GPIO Port H Software Reset +#define SYSCTL_SRGPIO_R6 0x00000040 // GPIO Port G Software Reset +#define SYSCTL_SRGPIO_R5 0x00000020 // GPIO Port F Software Reset +#define SYSCTL_SRGPIO_R4 0x00000010 // GPIO Port E Software Reset +#define SYSCTL_SRGPIO_R3 0x00000008 // GPIO Port D Software Reset +#define SYSCTL_SRGPIO_R2 0x00000004 // GPIO Port C Software Reset +#define SYSCTL_SRGPIO_R1 0x00000002 // GPIO Port B Software Reset +#define SYSCTL_SRGPIO_R0 0x00000001 // GPIO Port A Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRDMA register. +// +//***************************************************************************** +#define SYSCTL_SRDMA_R0 0x00000001 // uDMA Module Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SREPI register. +// +//***************************************************************************** +#define SYSCTL_SREPI_R0 0x00000001 // EPI Module Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRHIB register. +// +//***************************************************************************** +#define SYSCTL_SRHIB_R0 0x00000001 // Hibernation Module Software + // Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRUART register. +// +//***************************************************************************** +#define SYSCTL_SRUART_R7 0x00000080 // UART Module 7 Software Reset +#define SYSCTL_SRUART_R6 0x00000040 // UART Module 6 Software Reset +#define SYSCTL_SRUART_R5 0x00000020 // UART Module 5 Software Reset +#define SYSCTL_SRUART_R4 0x00000010 // UART Module 4 Software Reset +#define SYSCTL_SRUART_R3 0x00000008 // UART Module 3 Software Reset +#define SYSCTL_SRUART_R2 0x00000004 // UART Module 2 Software Reset +#define SYSCTL_SRUART_R1 0x00000002 // UART Module 1 Software Reset +#define SYSCTL_SRUART_R0 0x00000001 // UART Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRSSI register. +// +//***************************************************************************** +#define SYSCTL_SRSSI_R3 0x00000008 // SSI Module 3 Software Reset +#define SYSCTL_SRSSI_R2 0x00000004 // SSI Module 2 Software Reset +#define SYSCTL_SRSSI_R1 0x00000002 // SSI Module 1 Software Reset +#define SYSCTL_SRSSI_R0 0x00000001 // SSI Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRI2C register. +// +//***************************************************************************** +#define SYSCTL_SRI2C_R9 0x00000200 // I2C Module 9 Software Reset +#define SYSCTL_SRI2C_R8 0x00000100 // I2C Module 8 Software Reset +#define SYSCTL_SRI2C_R7 0x00000080 // I2C Module 7 Software Reset +#define SYSCTL_SRI2C_R6 0x00000040 // I2C Module 6 Software Reset +#define SYSCTL_SRI2C_R5 0x00000020 // I2C Module 5 Software Reset +#define SYSCTL_SRI2C_R4 0x00000010 // I2C Module 4 Software Reset +#define SYSCTL_SRI2C_R3 0x00000008 // I2C Module 3 Software Reset +#define SYSCTL_SRI2C_R2 0x00000004 // I2C Module 2 Software Reset +#define SYSCTL_SRI2C_R1 0x00000002 // I2C Module 1 Software Reset +#define SYSCTL_SRI2C_R0 0x00000001 // I2C Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRUSB register. +// +//***************************************************************************** +#define SYSCTL_SRUSB_R0 0x00000001 // USB Module Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SREPHY register. +// +//***************************************************************************** +#define SYSCTL_SREPHY_R0 0x00000001 // Ethernet PHY Module Software + // Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCAN register. +// +//***************************************************************************** +#define SYSCTL_SRCAN_R1 0x00000002 // CAN Module 1 Software Reset +#define SYSCTL_SRCAN_R0 0x00000001 // CAN Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRADC register. +// +//***************************************************************************** +#define SYSCTL_SRADC_R1 0x00000002 // ADC Module 1 Software Reset +#define SYSCTL_SRADC_R0 0x00000001 // ADC Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRACMP register. +// +//***************************************************************************** +#define SYSCTL_SRACMP_R0 0x00000001 // Analog Comparator Module 0 + // Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRPWM register. +// +//***************************************************************************** +#define SYSCTL_SRPWM_R1 0x00000002 // PWM Module 1 Software Reset +#define SYSCTL_SRPWM_R0 0x00000001 // PWM Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRQEI register. +// +//***************************************************************************** +#define SYSCTL_SRQEI_R1 0x00000002 // QEI Module 1 Software Reset +#define SYSCTL_SRQEI_R0 0x00000001 // QEI Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SREEPROM +// register. +// +//***************************************************************************** +#define SYSCTL_SREEPROM_R0 0x00000001 // EEPROM Module Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRWTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_SRWTIMER_R5 0x00000020 // 32/64-Bit Wide General-Purpose + // Timer 5 Software Reset +#define SYSCTL_SRWTIMER_R4 0x00000010 // 32/64-Bit Wide General-Purpose + // Timer 4 Software Reset +#define SYSCTL_SRWTIMER_R3 0x00000008 // 32/64-Bit Wide General-Purpose + // Timer 3 Software Reset +#define SYSCTL_SRWTIMER_R2 0x00000004 // 32/64-Bit Wide General-Purpose + // Timer 2 Software Reset +#define SYSCTL_SRWTIMER_R1 0x00000002 // 32/64-Bit Wide General-Purpose + // Timer 1 Software Reset +#define SYSCTL_SRWTIMER_R0 0x00000001 // 32/64-Bit Wide General-Purpose + // Timer 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRCCM register. +// +//***************************************************************************** +#define SYSCTL_SRCCM_R0 0x00000001 // CRC and Cryptographic Modules + // Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SRLCD register. +// +//***************************************************************************** +#define SYSCTL_SRLCD_R0 0x00000001 // LCD Module 0 Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SROWIRE register. +// +//***************************************************************************** +#define SYSCTL_SROWIRE_R0 0x00000001 // 1-Wire Module Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SREMAC register. +// +//***************************************************************************** +#define SYSCTL_SREMAC_R0 0x00000001 // Ethernet Controller MAC Module 0 + // Software Reset + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCWD register. +// +//***************************************************************************** +#define SYSCTL_RCGCWD_R1 0x00000002 // Watchdog Timer 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCWD_R0 0x00000001 // Watchdog Timer 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer + // 7 Run Mode Clock Gating Control +#define SYSCTL_RCGCTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer + // 6 Run Mode Clock Gating Control +#define SYSCTL_RCGCTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer + // 5 Run Mode Clock Gating Control +#define SYSCTL_RCGCTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer + // 4 Run Mode Clock Gating Control +#define SYSCTL_RCGCTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer + // 3 Run Mode Clock Gating Control +#define SYSCTL_RCGCTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer + // 2 Run Mode Clock Gating Control +#define SYSCTL_RCGCTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer + // 1 Run Mode Clock Gating Control +#define SYSCTL_RCGCTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer + // 0 Run Mode Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCGPIO +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCGPIO_R17 0x00020000 // GPIO Port T Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R16 0x00010000 // GPIO Port S Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R15 0x00008000 // GPIO Port R Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R14 0x00004000 // GPIO Port Q Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R13 0x00002000 // GPIO Port P Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R12 0x00001000 // GPIO Port N Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R11 0x00000800 // GPIO Port M Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R10 0x00000400 // GPIO Port L Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R9 0x00000200 // GPIO Port K Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R8 0x00000100 // GPIO Port J Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R7 0x00000080 // GPIO Port H Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R6 0x00000040 // GPIO Port G Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R5 0x00000020 // GPIO Port F Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R4 0x00000010 // GPIO Port E Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R3 0x00000008 // GPIO Port D Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R2 0x00000004 // GPIO Port C Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R1 0x00000002 // GPIO Port B Run Mode Clock + // Gating Control +#define SYSCTL_RCGCGPIO_R0 0x00000001 // GPIO Port A Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCDMA register. +// +//***************************************************************************** +#define SYSCTL_RCGCDMA_R0 0x00000001 // uDMA Module Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCEPI register. +// +//***************************************************************************** +#define SYSCTL_RCGCEPI_R0 0x00000001 // EPI Module Run Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCHIB register. +// +//***************************************************************************** +#define SYSCTL_RCGCHIB_R0 0x00000001 // Hibernation Module Run Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCUART +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCUART_R7 0x00000080 // UART Module 7 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R6 0x00000040 // UART Module 6 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R5 0x00000020 // UART Module 5 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R4 0x00000010 // UART Module 4 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R3 0x00000008 // UART Module 3 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R2 0x00000004 // UART Module 2 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R1 0x00000002 // UART Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCUART_R0 0x00000001 // UART Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCSSI register. +// +//***************************************************************************** +#define SYSCTL_RCGCSSI_R3 0x00000008 // SSI Module 3 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCSSI_R2 0x00000004 // SSI Module 2 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCSSI_R1 0x00000002 // SSI Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCSSI_R0 0x00000001 // SSI Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCI2C register. +// +//***************************************************************************** +#define SYSCTL_RCGCI2C_R9 0x00000200 // I2C Module 9 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCI2C_R8 0x00000100 // I2C Module 8 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCI2C_R7 0x00000080 // I2C Module 7 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCI2C_R6 0x00000040 // I2C Module 6 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCI2C_R5 0x00000020 // I2C Module 5 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCI2C_R4 0x00000010 // I2C Module 4 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCI2C_R3 0x00000008 // I2C Module 3 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCI2C_R2 0x00000004 // I2C Module 2 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCI2C_R1 0x00000002 // I2C Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCI2C_R0 0x00000001 // I2C Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCUSB register. +// +//***************************************************************************** +#define SYSCTL_RCGCUSB_R0 0x00000001 // USB Module Run Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCEPHY +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCEPHY_R0 0x00000001 // Ethernet PHY Module Run Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCCAN register. +// +//***************************************************************************** +#define SYSCTL_RCGCCAN_R1 0x00000002 // CAN Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCCAN_R0 0x00000001 // CAN Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCADC register. +// +//***************************************************************************** +#define SYSCTL_RCGCADC_R1 0x00000002 // ADC Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCADC_R0 0x00000001 // ADC Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCACMP +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCACMP_R0 0x00000001 // Analog Comparator Module 0 Run + // Mode Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCPWM register. +// +//***************************************************************************** +#define SYSCTL_RCGCPWM_R1 0x00000002 // PWM Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCPWM_R0 0x00000001 // PWM Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCQEI register. +// +//***************************************************************************** +#define SYSCTL_RCGCQEI_R1 0x00000002 // QEI Module 1 Run Mode Clock + // Gating Control +#define SYSCTL_RCGCQEI_R0 0x00000001 // QEI Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCEEPROM +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCEEPROM_R0 0x00000001 // EEPROM Module Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCWTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCWTIMER_R5 0x00000020 // 32/64-Bit Wide General-Purpose + // Timer 5 Run Mode Clock Gating + // Control +#define SYSCTL_RCGCWTIMER_R4 0x00000010 // 32/64-Bit Wide General-Purpose + // Timer 4 Run Mode Clock Gating + // Control +#define SYSCTL_RCGCWTIMER_R3 0x00000008 // 32/64-Bit Wide General-Purpose + // Timer 3 Run Mode Clock Gating + // Control +#define SYSCTL_RCGCWTIMER_R2 0x00000004 // 32/64-Bit Wide General-Purpose + // Timer 2 Run Mode Clock Gating + // Control +#define SYSCTL_RCGCWTIMER_R1 0x00000002 // 32/64-Bit Wide General-Purpose + // Timer 1 Run Mode Clock Gating + // Control +#define SYSCTL_RCGCWTIMER_R0 0x00000001 // 32/64-Bit Wide General-Purpose + // Timer 0 Run Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCCCM register. +// +//***************************************************************************** +#define SYSCTL_RCGCCCM_R0 0x00000001 // CRC and Cryptographic Modules + // Run Mode Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCLCD register. +// +//***************************************************************************** +#define SYSCTL_RCGCLCD_R0 0x00000001 // LCD Controller Module 0 Run Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCOWIRE +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCOWIRE_R0 0x00000001 // 1-Wire Module 0 Run Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_RCGCEMAC +// register. +// +//***************************************************************************** +#define SYSCTL_RCGCEMAC_R0 0x00000001 // Ethernet MAC Module 0 Run Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCWD register. +// +//***************************************************************************** +#define SYSCTL_SCGCWD_S1 0x00000002 // Watchdog Timer 1 Sleep Mode + // Clock Gating Control +#define SYSCTL_SCGCWD_S0 0x00000001 // Watchdog Timer 0 Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCTIMER_S7 0x00000080 // 16/32-Bit General-Purpose Timer + // 7 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCTIMER_S6 0x00000040 // 16/32-Bit General-Purpose Timer + // 6 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCTIMER_S5 0x00000020 // 16/32-Bit General-Purpose Timer + // 5 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCTIMER_S4 0x00000010 // 16/32-Bit General-Purpose Timer + // 4 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCTIMER_S3 0x00000008 // 16/32-Bit General-Purpose Timer + // 3 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCTIMER_S2 0x00000004 // 16/32-Bit General-Purpose Timer + // 2 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCTIMER_S1 0x00000002 // 16/32-Bit General-Purpose Timer + // 1 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCTIMER_S0 0x00000001 // 16/32-Bit General-Purpose Timer + // 0 Sleep Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCGPIO +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCGPIO_S17 0x00020000 // GPIO Port T Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S16 0x00010000 // GPIO Port S Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S15 0x00008000 // GPIO Port R Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S14 0x00004000 // GPIO Port Q Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S13 0x00002000 // GPIO Port P Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S12 0x00001000 // GPIO Port N Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S11 0x00000800 // GPIO Port M Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S10 0x00000400 // GPIO Port L Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S9 0x00000200 // GPIO Port K Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S8 0x00000100 // GPIO Port J Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S7 0x00000080 // GPIO Port H Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S6 0x00000040 // GPIO Port G Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S5 0x00000020 // GPIO Port F Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S4 0x00000010 // GPIO Port E Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S3 0x00000008 // GPIO Port D Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S2 0x00000004 // GPIO Port C Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S1 0x00000002 // GPIO Port B Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCGPIO_S0 0x00000001 // GPIO Port A Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCDMA register. +// +//***************************************************************************** +#define SYSCTL_SCGCDMA_S0 0x00000001 // uDMA Module Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCEPI register. +// +//***************************************************************************** +#define SYSCTL_SCGCEPI_S0 0x00000001 // EPI Module Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCHIB register. +// +//***************************************************************************** +#define SYSCTL_SCGCHIB_S0 0x00000001 // Hibernation Module Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCUART +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCUART_S7 0x00000080 // UART Module 7 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S6 0x00000040 // UART Module 6 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S5 0x00000020 // UART Module 5 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S4 0x00000010 // UART Module 4 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S3 0x00000008 // UART Module 3 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S2 0x00000004 // UART Module 2 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S1 0x00000002 // UART Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCUART_S0 0x00000001 // UART Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCSSI register. +// +//***************************************************************************** +#define SYSCTL_SCGCSSI_S3 0x00000008 // SSI Module 3 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCSSI_S2 0x00000004 // SSI Module 2 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCSSI_S1 0x00000002 // SSI Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCSSI_S0 0x00000001 // SSI Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCI2C register. +// +//***************************************************************************** +#define SYSCTL_SCGCI2C_S9 0x00000200 // I2C Module 9 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCI2C_S8 0x00000100 // I2C Module 8 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCI2C_S7 0x00000080 // I2C Module 7 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCI2C_S6 0x00000040 // I2C Module 6 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCI2C_S5 0x00000020 // I2C Module 5 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCI2C_S4 0x00000010 // I2C Module 4 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCI2C_S3 0x00000008 // I2C Module 3 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCI2C_S2 0x00000004 // I2C Module 2 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCI2C_S1 0x00000002 // I2C Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCI2C_S0 0x00000001 // I2C Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCUSB register. +// +//***************************************************************************** +#define SYSCTL_SCGCUSB_S0 0x00000001 // USB Module Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCEPHY +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCEPHY_S0 0x00000001 // PHY Module Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCCAN register. +// +//***************************************************************************** +#define SYSCTL_SCGCCAN_S1 0x00000002 // CAN Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCCAN_S0 0x00000001 // CAN Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCADC register. +// +//***************************************************************************** +#define SYSCTL_SCGCADC_S1 0x00000002 // ADC Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCADC_S0 0x00000001 // ADC Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCACMP +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCACMP_S0 0x00000001 // Analog Comparator Module 0 Sleep + // Mode Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCPWM register. +// +//***************************************************************************** +#define SYSCTL_SCGCPWM_S1 0x00000002 // PWM Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCPWM_S0 0x00000001 // PWM Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCQEI register. +// +//***************************************************************************** +#define SYSCTL_SCGCQEI_S1 0x00000002 // QEI Module 1 Sleep Mode Clock + // Gating Control +#define SYSCTL_SCGCQEI_S0 0x00000001 // QEI Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCEEPROM +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCEEPROM_S0 0x00000001 // EEPROM Module Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCWTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCWTIMER_S5 0x00000020 // 32/64-Bit Wide General-Purpose + // Timer 5 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCWTIMER_S4 0x00000010 // 32/64-Bit Wide General-Purpose + // Timer 4 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCWTIMER_S3 0x00000008 // 32/64-Bit Wide General-Purpose + // Timer 3 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCWTIMER_S2 0x00000004 // 32/64-Bit Wide General-Purpose + // Timer 2 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCWTIMER_S1 0x00000002 // 32/64-Bit Wide General-Purpose + // Timer 1 Sleep Mode Clock Gating + // Control +#define SYSCTL_SCGCWTIMER_S0 0x00000001 // 32/64-Bit Wide General-Purpose + // Timer 0 Sleep Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCCCM register. +// +//***************************************************************************** +#define SYSCTL_SCGCCCM_S0 0x00000001 // CRC and Cryptographic Modules + // Sleep Mode Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCLCD register. +// +//***************************************************************************** +#define SYSCTL_SCGCLCD_S0 0x00000001 // LCD Controller Module 0 Sleep + // Mode Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCOWIRE +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCOWIRE_S0 0x00000001 // 1-Wire Module 0 Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_SCGCEMAC +// register. +// +//***************************************************************************** +#define SYSCTL_SCGCEMAC_S0 0x00000001 // Ethernet MAC Module 0 Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCWD register. +// +//***************************************************************************** +#define SYSCTL_DCGCWD_D1 0x00000002 // Watchdog Timer 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCWD_D0 0x00000001 // Watchdog Timer 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCTIMER_D7 0x00000080 // 16/32-Bit General-Purpose Timer + // 7 Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCTIMER_D6 0x00000040 // 16/32-Bit General-Purpose Timer + // 6 Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCTIMER_D5 0x00000020 // 16/32-Bit General-Purpose Timer + // 5 Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCTIMER_D4 0x00000010 // 16/32-Bit General-Purpose Timer + // 4 Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCTIMER_D3 0x00000008 // 16/32-Bit General-Purpose Timer + // 3 Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCTIMER_D2 0x00000004 // 16/32-Bit General-Purpose Timer + // 2 Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCTIMER_D1 0x00000002 // 16/32-Bit General-Purpose Timer + // 1 Deep-Sleep Mode Clock Gating + // Control +#define SYSCTL_DCGCTIMER_D0 0x00000001 // 16/32-Bit General-Purpose Timer + // 0 Deep-Sleep Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCGPIO +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCGPIO_D17 0x00020000 // GPIO Port T Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D16 0x00010000 // GPIO Port S Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D15 0x00008000 // GPIO Port R Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D14 0x00004000 // GPIO Port Q Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D13 0x00002000 // GPIO Port P Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D12 0x00001000 // GPIO Port N Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D11 0x00000800 // GPIO Port M Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D10 0x00000400 // GPIO Port L Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D9 0x00000200 // GPIO Port K Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D8 0x00000100 // GPIO Port J Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D7 0x00000080 // GPIO Port H Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D6 0x00000040 // GPIO Port G Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D5 0x00000020 // GPIO Port F Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D4 0x00000010 // GPIO Port E Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D3 0x00000008 // GPIO Port D Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D2 0x00000004 // GPIO Port C Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D1 0x00000002 // GPIO Port B Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCGPIO_D0 0x00000001 // GPIO Port A Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCDMA register. +// +//***************************************************************************** +#define SYSCTL_DCGCDMA_D0 0x00000001 // uDMA Module Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCEPI register. +// +//***************************************************************************** +#define SYSCTL_DCGCEPI_D0 0x00000001 // EPI Module Deep-Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCHIB register. +// +//***************************************************************************** +#define SYSCTL_DCGCHIB_D0 0x00000001 // Hibernation Module Deep-Sleep + // Mode Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCUART +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCUART_D7 0x00000080 // UART Module 7 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D6 0x00000040 // UART Module 6 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D5 0x00000020 // UART Module 5 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D4 0x00000010 // UART Module 4 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D3 0x00000008 // UART Module 3 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D2 0x00000004 // UART Module 2 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D1 0x00000002 // UART Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCUART_D0 0x00000001 // UART Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCSSI register. +// +//***************************************************************************** +#define SYSCTL_DCGCSSI_D3 0x00000008 // SSI Module 3 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCSSI_D2 0x00000004 // SSI Module 2 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCSSI_D1 0x00000002 // SSI Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCSSI_D0 0x00000001 // SSI Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCI2C register. +// +//***************************************************************************** +#define SYSCTL_DCGCI2C_D9 0x00000200 // I2C Module 9 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCI2C_D8 0x00000100 // I2C Module 8 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCI2C_D7 0x00000080 // I2C Module 7 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCI2C_D6 0x00000040 // I2C Module 6 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCI2C_D5 0x00000020 // I2C Module 5 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCI2C_D4 0x00000010 // I2C Module 4 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCI2C_D3 0x00000008 // I2C Module 3 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCI2C_D2 0x00000004 // I2C Module 2 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCI2C_D1 0x00000002 // I2C Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCI2C_D0 0x00000001 // I2C Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCUSB register. +// +//***************************************************************************** +#define SYSCTL_DCGCUSB_D0 0x00000001 // USB Module Deep-Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCEPHY +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCEPHY_D0 0x00000001 // PHY Module Deep-Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCCAN register. +// +//***************************************************************************** +#define SYSCTL_DCGCCAN_D1 0x00000002 // CAN Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCCAN_D0 0x00000001 // CAN Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCADC register. +// +//***************************************************************************** +#define SYSCTL_DCGCADC_D1 0x00000002 // ADC Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCADC_D0 0x00000001 // ADC Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCACMP +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCACMP_D0 0x00000001 // Analog Comparator Module 0 + // Deep-Sleep Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCPWM register. +// +//***************************************************************************** +#define SYSCTL_DCGCPWM_D1 0x00000002 // PWM Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCPWM_D0 0x00000001 // PWM Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCQEI register. +// +//***************************************************************************** +#define SYSCTL_DCGCQEI_D1 0x00000002 // QEI Module 1 Deep-Sleep Mode + // Clock Gating Control +#define SYSCTL_DCGCQEI_D0 0x00000001 // QEI Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCEEPROM +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCEEPROM_D0 0x00000001 // EEPROM Module Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCWTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCWTIMER_D5 0x00000020 // 32/64-Bit Wide General-Purpose + // Timer 5 Deep-Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCWTIMER_D4 0x00000010 // 32/64-Bit Wide General-Purpose + // Timer 4 Deep-Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCWTIMER_D3 0x00000008 // 32/64-Bit Wide General-Purpose + // Timer 3 Deep-Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCWTIMER_D2 0x00000004 // 32/64-Bit Wide General-Purpose + // Timer 2 Deep-Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCWTIMER_D1 0x00000002 // 32/64-Bit Wide General-Purpose + // Timer 1 Deep-Sleep Mode Clock + // Gating Control +#define SYSCTL_DCGCWTIMER_D0 0x00000001 // 32/64-Bit Wide General-Purpose + // Timer 0 Deep-Sleep Mode Clock + // Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCCCM register. +// +//***************************************************************************** +#define SYSCTL_DCGCCCM_D0 0x00000001 // CRC and Cryptographic Modules + // Deep-Sleep Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCLCD register. +// +//***************************************************************************** +#define SYSCTL_DCGCLCD_D0 0x00000001 // LCD Controller Module 0 + // Deep-Sleep Mode Clock Gating + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCOWIRE +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCOWIRE_D0 0x00000001 // 1-Wire Module 0 Deep-Sleep Mode + // Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_DCGCEMAC +// register. +// +//***************************************************************************** +#define SYSCTL_DCGCEMAC_D0 0x00000001 // Ethernet MAC Module 0 Deep-Sleep + // Mode Clock Gating Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCWD register. +// +//***************************************************************************** +#define SYSCTL_PCWD_P1 0x00000002 // Watchdog Timer 1 Power Control +#define SYSCTL_PCWD_P0 0x00000001 // Watchdog Timer 0 Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCTIMER register. +// +//***************************************************************************** +#define SYSCTL_PCTIMER_P7 0x00000080 // General-Purpose Timer 7 Power + // Control +#define SYSCTL_PCTIMER_P6 0x00000040 // General-Purpose Timer 6 Power + // Control +#define SYSCTL_PCTIMER_P5 0x00000020 // General-Purpose Timer 5 Power + // Control +#define SYSCTL_PCTIMER_P4 0x00000010 // General-Purpose Timer 4 Power + // Control +#define SYSCTL_PCTIMER_P3 0x00000008 // General-Purpose Timer 3 Power + // Control +#define SYSCTL_PCTIMER_P2 0x00000004 // General-Purpose Timer 2 Power + // Control +#define SYSCTL_PCTIMER_P1 0x00000002 // General-Purpose Timer 1 Power + // Control +#define SYSCTL_PCTIMER_P0 0x00000001 // General-Purpose Timer 0 Power + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCGPIO register. +// +//***************************************************************************** +#define SYSCTL_PCGPIO_P17 0x00020000 // GPIO Port T Power Control +#define SYSCTL_PCGPIO_P16 0x00010000 // GPIO Port S Power Control +#define SYSCTL_PCGPIO_P15 0x00008000 // GPIO Port R Power Control +#define SYSCTL_PCGPIO_P14 0x00004000 // GPIO Port Q Power Control +#define SYSCTL_PCGPIO_P13 0x00002000 // GPIO Port P Power Control +#define SYSCTL_PCGPIO_P12 0x00001000 // GPIO Port N Power Control +#define SYSCTL_PCGPIO_P11 0x00000800 // GPIO Port M Power Control +#define SYSCTL_PCGPIO_P10 0x00000400 // GPIO Port L Power Control +#define SYSCTL_PCGPIO_P9 0x00000200 // GPIO Port K Power Control +#define SYSCTL_PCGPIO_P8 0x00000100 // GPIO Port J Power Control +#define SYSCTL_PCGPIO_P7 0x00000080 // GPIO Port H Power Control +#define SYSCTL_PCGPIO_P6 0x00000040 // GPIO Port G Power Control +#define SYSCTL_PCGPIO_P5 0x00000020 // GPIO Port F Power Control +#define SYSCTL_PCGPIO_P4 0x00000010 // GPIO Port E Power Control +#define SYSCTL_PCGPIO_P3 0x00000008 // GPIO Port D Power Control +#define SYSCTL_PCGPIO_P2 0x00000004 // GPIO Port C Power Control +#define SYSCTL_PCGPIO_P1 0x00000002 // GPIO Port B Power Control +#define SYSCTL_PCGPIO_P0 0x00000001 // GPIO Port A Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCDMA register. +// +//***************************************************************************** +#define SYSCTL_PCDMA_P0 0x00000001 // uDMA Module Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCEPI register. +// +//***************************************************************************** +#define SYSCTL_PCEPI_P0 0x00000001 // EPI Module Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCHIB register. +// +//***************************************************************************** +#define SYSCTL_PCHIB_P0 0x00000001 // Hibernation Module Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCUART register. +// +//***************************************************************************** +#define SYSCTL_PCUART_P7 0x00000080 // UART Module 7 Power Control +#define SYSCTL_PCUART_P6 0x00000040 // UART Module 6 Power Control +#define SYSCTL_PCUART_P5 0x00000020 // UART Module 5 Power Control +#define SYSCTL_PCUART_P4 0x00000010 // UART Module 4 Power Control +#define SYSCTL_PCUART_P3 0x00000008 // UART Module 3 Power Control +#define SYSCTL_PCUART_P2 0x00000004 // UART Module 2 Power Control +#define SYSCTL_PCUART_P1 0x00000002 // UART Module 1 Power Control +#define SYSCTL_PCUART_P0 0x00000001 // UART Module 0 Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCSSI register. +// +//***************************************************************************** +#define SYSCTL_PCSSI_P3 0x00000008 // SSI Module 3 Power Control +#define SYSCTL_PCSSI_P2 0x00000004 // SSI Module 2 Power Control +#define SYSCTL_PCSSI_P1 0x00000002 // SSI Module 1 Power Control +#define SYSCTL_PCSSI_P0 0x00000001 // SSI Module 0 Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCI2C register. +// +//***************************************************************************** +#define SYSCTL_PCI2C_P9 0x00000200 // I2C Module 9 Power Control +#define SYSCTL_PCI2C_P8 0x00000100 // I2C Module 8 Power Control +#define SYSCTL_PCI2C_P7 0x00000080 // I2C Module 7 Power Control +#define SYSCTL_PCI2C_P6 0x00000040 // I2C Module 6 Power Control +#define SYSCTL_PCI2C_P5 0x00000020 // I2C Module 5 Power Control +#define SYSCTL_PCI2C_P4 0x00000010 // I2C Module 4 Power Control +#define SYSCTL_PCI2C_P3 0x00000008 // I2C Module 3 Power Control +#define SYSCTL_PCI2C_P2 0x00000004 // I2C Module 2 Power Control +#define SYSCTL_PCI2C_P1 0x00000002 // I2C Module 1 Power Control +#define SYSCTL_PCI2C_P0 0x00000001 // I2C Module 0 Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCUSB register. +// +//***************************************************************************** +#define SYSCTL_PCUSB_P0 0x00000001 // USB Module Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCEPHY register. +// +//***************************************************************************** +#define SYSCTL_PCEPHY_P0 0x00000001 // Ethernet PHY Module Power + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCCAN register. +// +//***************************************************************************** +#define SYSCTL_PCCAN_P1 0x00000002 // CAN Module 1 Power Control +#define SYSCTL_PCCAN_P0 0x00000001 // CAN Module 0 Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCADC register. +// +//***************************************************************************** +#define SYSCTL_PCADC_P1 0x00000002 // ADC Module 1 Power Control +#define SYSCTL_PCADC_P0 0x00000001 // ADC Module 0 Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCACMP register. +// +//***************************************************************************** +#define SYSCTL_PCACMP_P0 0x00000001 // Analog Comparator Module 0 Power + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCPWM register. +// +//***************************************************************************** +#define SYSCTL_PCPWM_P0 0x00000001 // PWM Module 0 Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCQEI register. +// +//***************************************************************************** +#define SYSCTL_PCQEI_P0 0x00000001 // QEI Module 0 Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCEEPROM +// register. +// +//***************************************************************************** +#define SYSCTL_PCEEPROM_P0 0x00000001 // EEPROM Module 0 Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCCCM register. +// +//***************************************************************************** +#define SYSCTL_PCCCM_P0 0x00000001 // CRC and Cryptographic Modules + // Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCLCD register. +// +//***************************************************************************** +#define SYSCTL_PCLCD_P0 0x00000001 // LCD Controller Module 0 Power + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCOWIRE register. +// +//***************************************************************************** +#define SYSCTL_PCOWIRE_P0 0x00000001 // 1-Wire Module 0 Power Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PCEMAC register. +// +//***************************************************************************** +#define SYSCTL_PCEMAC_P0 0x00000001 // Ethernet MAC Module 0 Power + // Control + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRWD register. +// +//***************************************************************************** +#define SYSCTL_PRWD_R1 0x00000002 // Watchdog Timer 1 Peripheral + // Ready +#define SYSCTL_PRWD_R0 0x00000001 // Watchdog Timer 0 Peripheral + // Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRTIMER register. +// +//***************************************************************************** +#define SYSCTL_PRTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer + // 7 Peripheral Ready +#define SYSCTL_PRTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer + // 6 Peripheral Ready +#define SYSCTL_PRTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer + // 5 Peripheral Ready +#define SYSCTL_PRTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer + // 4 Peripheral Ready +#define SYSCTL_PRTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer + // 3 Peripheral Ready +#define SYSCTL_PRTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer + // 2 Peripheral Ready +#define SYSCTL_PRTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer + // 1 Peripheral Ready +#define SYSCTL_PRTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer + // 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRGPIO register. +// +//***************************************************************************** +#define SYSCTL_PRGPIO_R17 0x00020000 // GPIO Port T Peripheral Ready +#define SYSCTL_PRGPIO_R16 0x00010000 // GPIO Port S Peripheral Ready +#define SYSCTL_PRGPIO_R15 0x00008000 // GPIO Port R Peripheral Ready +#define SYSCTL_PRGPIO_R14 0x00004000 // GPIO Port Q Peripheral Ready +#define SYSCTL_PRGPIO_R13 0x00002000 // GPIO Port P Peripheral Ready +#define SYSCTL_PRGPIO_R12 0x00001000 // GPIO Port N Peripheral Ready +#define SYSCTL_PRGPIO_R11 0x00000800 // GPIO Port M Peripheral Ready +#define SYSCTL_PRGPIO_R10 0x00000400 // GPIO Port L Peripheral Ready +#define SYSCTL_PRGPIO_R9 0x00000200 // GPIO Port K Peripheral Ready +#define SYSCTL_PRGPIO_R8 0x00000100 // GPIO Port J Peripheral Ready +#define SYSCTL_PRGPIO_R7 0x00000080 // GPIO Port H Peripheral Ready +#define SYSCTL_PRGPIO_R6 0x00000040 // GPIO Port G Peripheral Ready +#define SYSCTL_PRGPIO_R5 0x00000020 // GPIO Port F Peripheral Ready +#define SYSCTL_PRGPIO_R4 0x00000010 // GPIO Port E Peripheral Ready +#define SYSCTL_PRGPIO_R3 0x00000008 // GPIO Port D Peripheral Ready +#define SYSCTL_PRGPIO_R2 0x00000004 // GPIO Port C Peripheral Ready +#define SYSCTL_PRGPIO_R1 0x00000002 // GPIO Port B Peripheral Ready +#define SYSCTL_PRGPIO_R0 0x00000001 // GPIO Port A Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRDMA register. +// +//***************************************************************************** +#define SYSCTL_PRDMA_R0 0x00000001 // uDMA Module Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PREPI register. +// +//***************************************************************************** +#define SYSCTL_PREPI_R0 0x00000001 // EPI Module Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRHIB register. +// +//***************************************************************************** +#define SYSCTL_PRHIB_R0 0x00000001 // Hibernation Module Peripheral + // Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRUART register. +// +//***************************************************************************** +#define SYSCTL_PRUART_R7 0x00000080 // UART Module 7 Peripheral Ready +#define SYSCTL_PRUART_R6 0x00000040 // UART Module 6 Peripheral Ready +#define SYSCTL_PRUART_R5 0x00000020 // UART Module 5 Peripheral Ready +#define SYSCTL_PRUART_R4 0x00000010 // UART Module 4 Peripheral Ready +#define SYSCTL_PRUART_R3 0x00000008 // UART Module 3 Peripheral Ready +#define SYSCTL_PRUART_R2 0x00000004 // UART Module 2 Peripheral Ready +#define SYSCTL_PRUART_R1 0x00000002 // UART Module 1 Peripheral Ready +#define SYSCTL_PRUART_R0 0x00000001 // UART Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRSSI register. +// +//***************************************************************************** +#define SYSCTL_PRSSI_R3 0x00000008 // SSI Module 3 Peripheral Ready +#define SYSCTL_PRSSI_R2 0x00000004 // SSI Module 2 Peripheral Ready +#define SYSCTL_PRSSI_R1 0x00000002 // SSI Module 1 Peripheral Ready +#define SYSCTL_PRSSI_R0 0x00000001 // SSI Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRI2C register. +// +//***************************************************************************** +#define SYSCTL_PRI2C_R9 0x00000200 // I2C Module 9 Peripheral Ready +#define SYSCTL_PRI2C_R8 0x00000100 // I2C Module 8 Peripheral Ready +#define SYSCTL_PRI2C_R7 0x00000080 // I2C Module 7 Peripheral Ready +#define SYSCTL_PRI2C_R6 0x00000040 // I2C Module 6 Peripheral Ready +#define SYSCTL_PRI2C_R5 0x00000020 // I2C Module 5 Peripheral Ready +#define SYSCTL_PRI2C_R4 0x00000010 // I2C Module 4 Peripheral Ready +#define SYSCTL_PRI2C_R3 0x00000008 // I2C Module 3 Peripheral Ready +#define SYSCTL_PRI2C_R2 0x00000004 // I2C Module 2 Peripheral Ready +#define SYSCTL_PRI2C_R1 0x00000002 // I2C Module 1 Peripheral Ready +#define SYSCTL_PRI2C_R0 0x00000001 // I2C Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRUSB register. +// +//***************************************************************************** +#define SYSCTL_PRUSB_R0 0x00000001 // USB Module Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PREPHY register. +// +//***************************************************************************** +#define SYSCTL_PREPHY_R0 0x00000001 // Ethernet PHY Module Peripheral + // Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRCAN register. +// +//***************************************************************************** +#define SYSCTL_PRCAN_R1 0x00000002 // CAN Module 1 Peripheral Ready +#define SYSCTL_PRCAN_R0 0x00000001 // CAN Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRADC register. +// +//***************************************************************************** +#define SYSCTL_PRADC_R1 0x00000002 // ADC Module 1 Peripheral Ready +#define SYSCTL_PRADC_R0 0x00000001 // ADC Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRACMP register. +// +//***************************************************************************** +#define SYSCTL_PRACMP_R0 0x00000001 // Analog Comparator Module 0 + // Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRPWM register. +// +//***************************************************************************** +#define SYSCTL_PRPWM_R1 0x00000002 // PWM Module 1 Peripheral Ready +#define SYSCTL_PRPWM_R0 0x00000001 // PWM Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRQEI register. +// +//***************************************************************************** +#define SYSCTL_PRQEI_R1 0x00000002 // QEI Module 1 Peripheral Ready +#define SYSCTL_PRQEI_R0 0x00000001 // QEI Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PREEPROM +// register. +// +//***************************************************************************** +#define SYSCTL_PREEPROM_R0 0x00000001 // EEPROM Module Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRWTIMER +// register. +// +//***************************************************************************** +#define SYSCTL_PRWTIMER_R5 0x00000020 // 32/64-Bit Wide General-Purpose + // Timer 5 Peripheral Ready +#define SYSCTL_PRWTIMER_R4 0x00000010 // 32/64-Bit Wide General-Purpose + // Timer 4 Peripheral Ready +#define SYSCTL_PRWTIMER_R3 0x00000008 // 32/64-Bit Wide General-Purpose + // Timer 3 Peripheral Ready +#define SYSCTL_PRWTIMER_R2 0x00000004 // 32/64-Bit Wide General-Purpose + // Timer 2 Peripheral Ready +#define SYSCTL_PRWTIMER_R1 0x00000002 // 32/64-Bit Wide General-Purpose + // Timer 1 Peripheral Ready +#define SYSCTL_PRWTIMER_R0 0x00000001 // 32/64-Bit Wide General-Purpose + // Timer 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRCCM register. +// +//***************************************************************************** +#define SYSCTL_PRCCM_R0 0x00000001 // CRC and Cryptographic Modules + // Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PRLCD register. +// +//***************************************************************************** +#define SYSCTL_PRLCD_R0 0x00000001 // LCD Controller Module 0 + // Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PROWIRE register. +// +//***************************************************************************** +#define SYSCTL_PROWIRE_R0 0x00000001 // 1-Wire Module 0 Peripheral Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_PREMAC register. +// +//***************************************************************************** +#define SYSCTL_PREMAC_R0 0x00000001 // Ethernet MAC Module 0 Peripheral + // Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_UNIQUEID0 +// register. +// +//***************************************************************************** +#define SYSCTL_UNIQUEID0_ID_M 0xFFFFFFFF // Unique ID +#define SYSCTL_UNIQUEID0_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_UNIQUEID1 +// register. +// +//***************************************************************************** +#define SYSCTL_UNIQUEID1_ID_M 0xFFFFFFFF // Unique ID +#define SYSCTL_UNIQUEID1_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_UNIQUEID2 +// register. +// +//***************************************************************************** +#define SYSCTL_UNIQUEID2_ID_M 0xFFFFFFFF // Unique ID +#define SYSCTL_UNIQUEID2_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_UNIQUEID3 +// register. +// +//***************************************************************************** +#define SYSCTL_UNIQUEID3_ID_M 0xFFFFFFFF // Unique ID +#define SYSCTL_UNIQUEID3_ID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSCTL_CCMCGREQ +// register. +// +//***************************************************************************** +#define SYSCTL_CCMCGREQ_DESCFG 0x00000004 // DES Clock Gating Request +#define SYSCTL_CCMCGREQ_AESCFG 0x00000002 // AES Clock Gating Request +#define SYSCTL_CCMCGREQ_SHACFG 0x00000001 // SHA/MD5 Clock Gating Request + +//***************************************************************************** +// +// The following definitions are deprecated. +// +//***************************************************************************** +#ifndef DEPRECATED + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_DID0 +// register. +// +//***************************************************************************** +#define SYSCTL_DID0_CLASS_BLIZZARD \ + 0x00050000 // Tiva(TM) C Series TM4C123-class + // microcontrollers +#define SYSCTL_DID0_CLASS_SNOWFLAKE \ + 0x000A0000 // Tiva(TM) C Series TM4C129-class + // microcontrollers + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_RESC +// register. +// +//***************************************************************************** +#define SYSCTL_RESC_HIB 0x00000040 // HIB Reset + +//***************************************************************************** +// +// The following are deprecated defines for the bit fields in the SYSCTL_PWRTC +// register. +// +//***************************************************************************** +#define SYSCTL_PWRTC_VDDA_UBOR0 0x00000010 // VDDA Under BOR0 Status +#define SYSCTL_PWRTC_VDD_UBOR0 0x00000001 // VDD Under BOR0 Status + +#endif + +#endif // __HW_SYSCTL_H__ diff --git a/os/common/ext/TivaWare/inc/hw_sysexc.h b/os/common/ext/TivaWare/inc/hw_sysexc.h new file mode 100644 index 0000000..a6eec99 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_sysexc.h @@ -0,0 +1,132 @@ +//***************************************************************************** +// +// hw_sysexc.h - Macros used when accessing the system exception module. +// +// Copyright (c) 2011-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_SYSEXC_H__ +#define __HW_SYSEXC_H__ + +//***************************************************************************** +// +// The following are defines for the System Exception Module register +// addresses. +// +//***************************************************************************** +#define SYSEXC_RIS 0x400F9000 // System Exception Raw Interrupt + // Status +#define SYSEXC_IM 0x400F9004 // System Exception Interrupt Mask +#define SYSEXC_MIS 0x400F9008 // System Exception Masked + // Interrupt Status +#define SYSEXC_IC 0x400F900C // System Exception Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSEXC_RIS register. +// +//***************************************************************************** +#define SYSEXC_RIS_FPIXCRIS 0x00000020 // Floating-Point Inexact Exception + // Raw Interrupt Status +#define SYSEXC_RIS_FPOFCRIS 0x00000010 // Floating-Point Overflow + // Exception Raw Interrupt Status +#define SYSEXC_RIS_FPUFCRIS 0x00000008 // Floating-Point Underflow + // Exception Raw Interrupt Status +#define SYSEXC_RIS_FPIOCRIS 0x00000004 // Floating-Point Invalid Operation + // Raw Interrupt Status +#define SYSEXC_RIS_FPDZCRIS 0x00000002 // Floating-Point Divide By 0 + // Exception Raw Interrupt Status +#define SYSEXC_RIS_FPIDCRIS 0x00000001 // Floating-Point Input Denormal + // Exception Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSEXC_IM register. +// +//***************************************************************************** +#define SYSEXC_IM_FPIXCIM 0x00000020 // Floating-Point Inexact Exception + // Interrupt Mask +#define SYSEXC_IM_FPOFCIM 0x00000010 // Floating-Point Overflow + // Exception Interrupt Mask +#define SYSEXC_IM_FPUFCIM 0x00000008 // Floating-Point Underflow + // Exception Interrupt Mask +#define SYSEXC_IM_FPIOCIM 0x00000004 // Floating-Point Invalid Operation + // Interrupt Mask +#define SYSEXC_IM_FPDZCIM 0x00000002 // Floating-Point Divide By 0 + // Exception Interrupt Mask +#define SYSEXC_IM_FPIDCIM 0x00000001 // Floating-Point Input Denormal + // Exception Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSEXC_MIS register. +// +//***************************************************************************** +#define SYSEXC_MIS_FPIXCMIS 0x00000020 // Floating-Point Inexact Exception + // Masked Interrupt Status +#define SYSEXC_MIS_FPOFCMIS 0x00000010 // Floating-Point Overflow + // Exception Masked Interrupt + // Status +#define SYSEXC_MIS_FPUFCMIS 0x00000008 // Floating-Point Underflow + // Exception Masked Interrupt + // Status +#define SYSEXC_MIS_FPIOCMIS 0x00000004 // Floating-Point Invalid Operation + // Masked Interrupt Status +#define SYSEXC_MIS_FPDZCMIS 0x00000002 // Floating-Point Divide By 0 + // Exception Masked Interrupt + // Status +#define SYSEXC_MIS_FPIDCMIS 0x00000001 // Floating-Point Input Denormal + // Exception Masked Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the SYSEXC_IC register. +// +//***************************************************************************** +#define SYSEXC_IC_FPIXCIC 0x00000020 // Floating-Point Inexact Exception + // Interrupt Clear +#define SYSEXC_IC_FPOFCIC 0x00000010 // Floating-Point Overflow + // Exception Interrupt Clear +#define SYSEXC_IC_FPUFCIC 0x00000008 // Floating-Point Underflow + // Exception Interrupt Clear +#define SYSEXC_IC_FPIOCIC 0x00000004 // Floating-Point Invalid Operation + // Interrupt Clear +#define SYSEXC_IC_FPDZCIC 0x00000002 // Floating-Point Divide By 0 + // Exception Interrupt Clear +#define SYSEXC_IC_FPIDCIC 0x00000001 // Floating-Point Input Denormal + // Exception Interrupt Clear + +#endif // __HW_SYSEXC_H__ diff --git a/os/common/ext/TivaWare/inc/hw_timer.h b/os/common/ext/TivaWare/inc/hw_timer.h new file mode 100644 index 0000000..25a7ed9 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_timer.h @@ -0,0 +1,700 @@ +//***************************************************************************** +// +// hw_timer.h - Defines and macros used when accessing the timer. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_TIMER_H__ +#define __HW_TIMER_H__ + +//***************************************************************************** +// +// The following are defines for the Timer register offsets. +// +//***************************************************************************** +#define TIMER_O_CFG 0x00000000 // GPTM Configuration +#define TIMER_O_TAMR 0x00000004 // GPTM Timer A Mode +#define TIMER_O_TBMR 0x00000008 // GPTM Timer B Mode +#define TIMER_O_CTL 0x0000000C // GPTM Control +#define TIMER_O_SYNC 0x00000010 // GPTM Synchronize +#define TIMER_O_IMR 0x00000018 // GPTM Interrupt Mask +#define TIMER_O_RIS 0x0000001C // GPTM Raw Interrupt Status +#define TIMER_O_MIS 0x00000020 // GPTM Masked Interrupt Status +#define TIMER_O_ICR 0x00000024 // GPTM Interrupt Clear +#define TIMER_O_TAILR 0x00000028 // GPTM Timer A Interval Load +#define TIMER_O_TBILR 0x0000002C // GPTM Timer B Interval Load +#define TIMER_O_TAMATCHR 0x00000030 // GPTM Timer A Match +#define TIMER_O_TBMATCHR 0x00000034 // GPTM Timer B Match +#define TIMER_O_TAPR 0x00000038 // GPTM Timer A Prescale +#define TIMER_O_TBPR 0x0000003C // GPTM Timer B Prescale +#define TIMER_O_TAPMR 0x00000040 // GPTM TimerA Prescale Match +#define TIMER_O_TBPMR 0x00000044 // GPTM TimerB Prescale Match +#define TIMER_O_TAR 0x00000048 // GPTM Timer A +#define TIMER_O_TBR 0x0000004C // GPTM Timer B +#define TIMER_O_TAV 0x00000050 // GPTM Timer A Value +#define TIMER_O_TBV 0x00000054 // GPTM Timer B Value +#define TIMER_O_RTCPD 0x00000058 // GPTM RTC Predivide +#define TIMER_O_TAPS 0x0000005C // GPTM Timer A Prescale Snapshot +#define TIMER_O_TBPS 0x00000060 // GPTM Timer B Prescale Snapshot +#define TIMER_O_TAPV 0x00000064 // GPTM Timer A Prescale Value +#define TIMER_O_TBPV 0x00000068 // GPTM Timer B Prescale Value +#define TIMER_O_DMAEV 0x0000006C // GPTM DMA Event +#define TIMER_O_ADCEV 0x00000070 // GPTM ADC Event +#define TIMER_O_PP 0x00000FC0 // GPTM Peripheral Properties +#define TIMER_O_CC 0x00000FC8 // GPTM Clock Configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_CFG register. +// +//***************************************************************************** +#define TIMER_CFG_M 0x00000007 // GPTM Configuration +#define TIMER_CFG_32_BIT_TIMER 0x00000000 // For a 16/32-bit timer, this + // value selects the 32-bit timer + // configuration +#define TIMER_CFG_32_BIT_RTC 0x00000001 // For a 16/32-bit timer, this + // value selects the 32-bit + // real-time clock (RTC) counter + // configuration +#define TIMER_CFG_16_BIT 0x00000004 // For a 16/32-bit timer, this + // value selects the 16-bit timer + // configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAMR register. +// +//***************************************************************************** +#define TIMER_TAMR_TCACT_M 0x0000E000 // Timer Compare Action Select +#define TIMER_TAMR_TCACT_NONE 0x00000000 // Disable compare operations +#define TIMER_TAMR_TCACT_TOGGLE 0x00002000 // Toggle State on Time-Out +#define TIMER_TAMR_TCACT_CLRTO 0x00004000 // Clear CCP on Time-Out +#define TIMER_TAMR_TCACT_SETTO 0x00006000 // Set CCP on Time-Out +#define TIMER_TAMR_TCACT_SETTOGTO \ + 0x00008000 // Set CCP immediately and toggle + // on Time-Out +#define TIMER_TAMR_TCACT_CLRTOGTO \ + 0x0000A000 // Clear CCP immediately and toggle + // on Time-Out +#define TIMER_TAMR_TCACT_SETCLRTO \ + 0x0000C000 // Set CCP immediately and clear on + // Time-Out +#define TIMER_TAMR_TCACT_CLRSETTO \ + 0x0000E000 // Clear CCP immediately and set on + // Time-Out +#define TIMER_TAMR_TACINTD 0x00001000 // One-shot/Periodic Interrupt + // Disable +#define TIMER_TAMR_TAPLO 0x00000800 // GPTM Timer A PWM Legacy + // Operation +#define TIMER_TAMR_TAMRSU 0x00000400 // GPTM Timer A Match Register + // Update +#define TIMER_TAMR_TAPWMIE 0x00000200 // GPTM Timer A PWM Interrupt + // Enable +#define TIMER_TAMR_TAILD 0x00000100 // GPTM Timer A Interval Load Write +#define TIMER_TAMR_TASNAPS 0x00000080 // GPTM Timer A Snap-Shot Mode +#define TIMER_TAMR_TAWOT 0x00000040 // GPTM Timer A Wait-on-Trigger +#define TIMER_TAMR_TAMIE 0x00000020 // GPTM Timer A Match Interrupt + // Enable +#define TIMER_TAMR_TACDIR 0x00000010 // GPTM Timer A Count Direction +#define TIMER_TAMR_TAAMS 0x00000008 // GPTM Timer A Alternate Mode + // Select +#define TIMER_TAMR_TACMR 0x00000004 // GPTM Timer A Capture Mode +#define TIMER_TAMR_TAMR_M 0x00000003 // GPTM Timer A Mode +#define TIMER_TAMR_TAMR_1_SHOT 0x00000001 // One-Shot Timer mode +#define TIMER_TAMR_TAMR_PERIOD 0x00000002 // Periodic Timer mode +#define TIMER_TAMR_TAMR_CAP 0x00000003 // Capture mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBMR register. +// +//***************************************************************************** +#define TIMER_TBMR_TCACT_M 0x0000E000 // Timer Compare Action Select +#define TIMER_TBMR_TCACT_NONE 0x00000000 // Disable compare operations +#define TIMER_TBMR_TCACT_TOGGLE 0x00002000 // Toggle State on Time-Out +#define TIMER_TBMR_TCACT_CLRTO 0x00004000 // Clear CCP on Time-Out +#define TIMER_TBMR_TCACT_SETTO 0x00006000 // Set CCP on Time-Out +#define TIMER_TBMR_TCACT_SETTOGTO \ + 0x00008000 // Set CCP immediately and toggle + // on Time-Out +#define TIMER_TBMR_TCACT_CLRTOGTO \ + 0x0000A000 // Clear CCP immediately and toggle + // on Time-Out +#define TIMER_TBMR_TCACT_SETCLRTO \ + 0x0000C000 // Set CCP immediately and clear on + // Time-Out +#define TIMER_TBMR_TCACT_CLRSETTO \ + 0x0000E000 // Clear CCP immediately and set on + // Time-Out +#define TIMER_TBMR_TBCINTD 0x00001000 // One-Shot/Periodic Interrupt + // Disable +#define TIMER_TBMR_TBPLO 0x00000800 // GPTM Timer B PWM Legacy + // Operation +#define TIMER_TBMR_TBMRSU 0x00000400 // GPTM Timer B Match Register + // Update +#define TIMER_TBMR_TBPWMIE 0x00000200 // GPTM Timer B PWM Interrupt + // Enable +#define TIMER_TBMR_TBILD 0x00000100 // GPTM Timer B Interval Load Write +#define TIMER_TBMR_TBSNAPS 0x00000080 // GPTM Timer B Snap-Shot Mode +#define TIMER_TBMR_TBWOT 0x00000040 // GPTM Timer B Wait-on-Trigger +#define TIMER_TBMR_TBMIE 0x00000020 // GPTM Timer B Match Interrupt + // Enable +#define TIMER_TBMR_TBCDIR 0x00000010 // GPTM Timer B Count Direction +#define TIMER_TBMR_TBAMS 0x00000008 // GPTM Timer B Alternate Mode + // Select +#define TIMER_TBMR_TBCMR 0x00000004 // GPTM Timer B Capture Mode +#define TIMER_TBMR_TBMR_M 0x00000003 // GPTM Timer B Mode +#define TIMER_TBMR_TBMR_1_SHOT 0x00000001 // One-Shot Timer mode +#define TIMER_TBMR_TBMR_PERIOD 0x00000002 // Periodic Timer mode +#define TIMER_TBMR_TBMR_CAP 0x00000003 // Capture mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_CTL register. +// +//***************************************************************************** +#define TIMER_CTL_TBPWML 0x00004000 // GPTM Timer B PWM Output Level +#define TIMER_CTL_TBOTE 0x00002000 // GPTM Timer B Output Trigger + // Enable +#define TIMER_CTL_TBEVENT_M 0x00000C00 // GPTM Timer B Event Mode +#define TIMER_CTL_TBEVENT_POS 0x00000000 // Positive edge +#define TIMER_CTL_TBEVENT_NEG 0x00000400 // Negative edge +#define TIMER_CTL_TBEVENT_BOTH 0x00000C00 // Both edges +#define TIMER_CTL_TBSTALL 0x00000200 // GPTM Timer B Stall Enable +#define TIMER_CTL_TBEN 0x00000100 // GPTM Timer B Enable +#define TIMER_CTL_TAPWML 0x00000040 // GPTM Timer A PWM Output Level +#define TIMER_CTL_TAOTE 0x00000020 // GPTM Timer A Output Trigger + // Enable +#define TIMER_CTL_RTCEN 0x00000010 // GPTM RTC Stall Enable +#define TIMER_CTL_TAEVENT_M 0x0000000C // GPTM Timer A Event Mode +#define TIMER_CTL_TAEVENT_POS 0x00000000 // Positive edge +#define TIMER_CTL_TAEVENT_NEG 0x00000004 // Negative edge +#define TIMER_CTL_TAEVENT_BOTH 0x0000000C // Both edges +#define TIMER_CTL_TASTALL 0x00000002 // GPTM Timer A Stall Enable +#define TIMER_CTL_TAEN 0x00000001 // GPTM Timer A Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_SYNC register. +// +//***************************************************************************** +#define TIMER_SYNC_SYNCWT5_M 0x00C00000 // Synchronize GPTM 32/64-Bit Timer + // 5 +#define TIMER_SYNC_SYNCWT5_NONE 0x00000000 // GPTM 32/64-Bit Timer 5 is not + // affected +#define TIMER_SYNC_SYNCWT5_TA 0x00400000 // A timeout event for Timer A of + // GPTM 32/64-Bit Timer 5 is + // triggered +#define TIMER_SYNC_SYNCWT5_TB 0x00800000 // A timeout event for Timer B of + // GPTM 32/64-Bit Timer 5 is + // triggered +#define TIMER_SYNC_SYNCWT5_TATB 0x00C00000 // A timeout event for both Timer A + // and Timer B of GPTM 32/64-Bit + // Timer 5 is triggered +#define TIMER_SYNC_SYNCWT4_M 0x00300000 // Synchronize GPTM 32/64-Bit Timer + // 4 +#define TIMER_SYNC_SYNCWT4_NONE 0x00000000 // GPTM 32/64-Bit Timer 4 is not + // affected +#define TIMER_SYNC_SYNCWT4_TA 0x00100000 // A timeout event for Timer A of + // GPTM 32/64-Bit Timer 4 is + // triggered +#define TIMER_SYNC_SYNCWT4_TB 0x00200000 // A timeout event for Timer B of + // GPTM 32/64-Bit Timer 4 is + // triggered +#define TIMER_SYNC_SYNCWT4_TATB 0x00300000 // A timeout event for both Timer A + // and Timer B of GPTM 32/64-Bit + // Timer 4 is triggered +#define TIMER_SYNC_SYNCWT3_M 0x000C0000 // Synchronize GPTM 32/64-Bit Timer + // 3 +#define TIMER_SYNC_SYNCWT3_NONE 0x00000000 // GPTM 32/64-Bit Timer 3 is not + // affected +#define TIMER_SYNC_SYNCWT3_TA 0x00040000 // A timeout event for Timer A of + // GPTM 32/64-Bit Timer 3 is + // triggered +#define TIMER_SYNC_SYNCWT3_TB 0x00080000 // A timeout event for Timer B of + // GPTM 32/64-Bit Timer 3 is + // triggered +#define TIMER_SYNC_SYNCWT3_TATB 0x000C0000 // A timeout event for both Timer A + // and Timer B of GPTM 32/64-Bit + // Timer 3 is triggered +#define TIMER_SYNC_SYNCWT2_M 0x00030000 // Synchronize GPTM 32/64-Bit Timer + // 2 +#define TIMER_SYNC_SYNCWT2_NONE 0x00000000 // GPTM 32/64-Bit Timer 2 is not + // affected +#define TIMER_SYNC_SYNCWT2_TA 0x00010000 // A timeout event for Timer A of + // GPTM 32/64-Bit Timer 2 is + // triggered +#define TIMER_SYNC_SYNCWT2_TB 0x00020000 // A timeout event for Timer B of + // GPTM 32/64-Bit Timer 2 is + // triggered +#define TIMER_SYNC_SYNCWT2_TATB 0x00030000 // A timeout event for both Timer A + // and Timer B of GPTM 32/64-Bit + // Timer 2 is triggered +#define TIMER_SYNC_SYNCT7_M 0x0000C000 // Synchronize GPTM Timer 7 +#define TIMER_SYNC_SYNCT7_NONE 0x00000000 // GPT7 is not affected +#define TIMER_SYNC_SYNCT7_TA 0x00004000 // A timeout event for Timer A of + // GPTM7 is triggered +#define TIMER_SYNC_SYNCT7_TB 0x00008000 // A timeout event for Timer B of + // GPTM7 is triggered +#define TIMER_SYNC_SYNCT7_TATB 0x0000C000 // A timeout event for both Timer A + // and Timer B of GPTM7 is + // triggered +#define TIMER_SYNC_SYNCWT1_M 0x0000C000 // Synchronize GPTM 32/64-Bit Timer + // 1 +#define TIMER_SYNC_SYNCWT1_NONE 0x00000000 // GPTM 32/64-Bit Timer 1 is not + // affected +#define TIMER_SYNC_SYNCWT1_TA 0x00004000 // A timeout event for Timer A of + // GPTM 32/64-Bit Timer 1 is + // triggered +#define TIMER_SYNC_SYNCWT1_TB 0x00008000 // A timeout event for Timer B of + // GPTM 32/64-Bit Timer 1 is + // triggered +#define TIMER_SYNC_SYNCWT1_TATB 0x0000C000 // A timeout event for both Timer A + // and Timer B of GPTM 32/64-Bit + // Timer 1 is triggered +#define TIMER_SYNC_SYNCWT0_M 0x00003000 // Synchronize GPTM 32/64-Bit Timer + // 0 +#define TIMER_SYNC_SYNCWT0_NONE 0x00000000 // GPTM 32/64-Bit Timer 0 is not + // affected +#define TIMER_SYNC_SYNCWT0_TA 0x00001000 // A timeout event for Timer A of + // GPTM 32/64-Bit Timer 0 is + // triggered +#define TIMER_SYNC_SYNCWT0_TB 0x00002000 // A timeout event for Timer B of + // GPTM 32/64-Bit Timer 0 is + // triggered +#define TIMER_SYNC_SYNCWT0_TATB 0x00003000 // A timeout event for both Timer A + // and Timer B of GPTM 32/64-Bit + // Timer 0 is triggered +#define TIMER_SYNC_SYNCT6_M 0x00003000 // Synchronize GPTM Timer 6 +#define TIMER_SYNC_SYNCT6_NONE 0x00000000 // GPTM6 is not affected +#define TIMER_SYNC_SYNCT6_TA 0x00001000 // A timeout event for Timer A of + // GPTM6 is triggered +#define TIMER_SYNC_SYNCT6_TB 0x00002000 // A timeout event for Timer B of + // GPTM6 is triggered +#define TIMER_SYNC_SYNCT6_TATB 0x00003000 // A timeout event for both Timer A + // and Timer B of GPTM6 is + // triggered +#define TIMER_SYNC_SYNCT5_M 0x00000C00 // Synchronize GPTM Timer 5 +#define TIMER_SYNC_SYNCT5_NONE 0x00000000 // GPTM5 is not affected +#define TIMER_SYNC_SYNCT5_TA 0x00000400 // A timeout event for Timer A of + // GPTM5 is triggered +#define TIMER_SYNC_SYNCT5_TB 0x00000800 // A timeout event for Timer B of + // GPTM5 is triggered +#define TIMER_SYNC_SYNCT5_TATB 0x00000C00 // A timeout event for both Timer A + // and Timer B of GPTM5 is + // triggered +#define TIMER_SYNC_SYNCT4_M 0x00000300 // Synchronize GPTM Timer 4 +#define TIMER_SYNC_SYNCT4_NONE 0x00000000 // GPTM4 is not affected +#define TIMER_SYNC_SYNCT4_TA 0x00000100 // A timeout event for Timer A of + // GPTM4 is triggered +#define TIMER_SYNC_SYNCT4_TB 0x00000200 // A timeout event for Timer B of + // GPTM4 is triggered +#define TIMER_SYNC_SYNCT4_TATB 0x00000300 // A timeout event for both Timer A + // and Timer B of GPTM4 is + // triggered +#define TIMER_SYNC_SYNCT3_M 0x000000C0 // Synchronize GPTM Timer 3 +#define TIMER_SYNC_SYNCT3_NONE 0x00000000 // GPTM3 is not affected +#define TIMER_SYNC_SYNCT3_TA 0x00000040 // A timeout event for Timer A of + // GPTM3 is triggered +#define TIMER_SYNC_SYNCT3_TB 0x00000080 // A timeout event for Timer B of + // GPTM3 is triggered +#define TIMER_SYNC_SYNCT3_TATB 0x000000C0 // A timeout event for both Timer A + // and Timer B of GPTM3 is + // triggered +#define TIMER_SYNC_SYNCT2_M 0x00000030 // Synchronize GPTM Timer 2 +#define TIMER_SYNC_SYNCT2_NONE 0x00000000 // GPTM2 is not affected +#define TIMER_SYNC_SYNCT2_TA 0x00000010 // A timeout event for Timer A of + // GPTM2 is triggered +#define TIMER_SYNC_SYNCT2_TB 0x00000020 // A timeout event for Timer B of + // GPTM2 is triggered +#define TIMER_SYNC_SYNCT2_TATB 0x00000030 // A timeout event for both Timer A + // and Timer B of GPTM2 is + // triggered +#define TIMER_SYNC_SYNCT1_M 0x0000000C // Synchronize GPTM Timer 1 +#define TIMER_SYNC_SYNCT1_NONE 0x00000000 // GPTM1 is not affected +#define TIMER_SYNC_SYNCT1_TA 0x00000004 // A timeout event for Timer A of + // GPTM1 is triggered +#define TIMER_SYNC_SYNCT1_TB 0x00000008 // A timeout event for Timer B of + // GPTM1 is triggered +#define TIMER_SYNC_SYNCT1_TATB 0x0000000C // A timeout event for both Timer A + // and Timer B of GPTM1 is + // triggered +#define TIMER_SYNC_SYNCT0_M 0x00000003 // Synchronize GPTM Timer 0 +#define TIMER_SYNC_SYNCT0_NONE 0x00000000 // GPTM0 is not affected +#define TIMER_SYNC_SYNCT0_TA 0x00000001 // A timeout event for Timer A of + // GPTM0 is triggered +#define TIMER_SYNC_SYNCT0_TB 0x00000002 // A timeout event for Timer B of + // GPTM0 is triggered +#define TIMER_SYNC_SYNCT0_TATB 0x00000003 // A timeout event for both Timer A + // and Timer B of GPTM0 is + // triggered + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_IMR register. +// +//***************************************************************************** +#define TIMER_IMR_WUEIM 0x00010000 // 32/64-Bit Wide GPTM Write Update + // Error Interrupt Mask +#define TIMER_IMR_DMABIM 0x00002000 // GPTM Timer B DMA Done Interrupt + // Mask +#define TIMER_IMR_TBMIM 0x00000800 // GPTM Timer B Match Interrupt + // Mask +#define TIMER_IMR_CBEIM 0x00000400 // GPTM Timer B Capture Mode Event + // Interrupt Mask +#define TIMER_IMR_CBMIM 0x00000200 // GPTM Timer B Capture Mode Match + // Interrupt Mask +#define TIMER_IMR_TBTOIM 0x00000100 // GPTM Timer B Time-Out Interrupt + // Mask +#define TIMER_IMR_DMAAIM 0x00000020 // GPTM Timer A DMA Done Interrupt + // Mask +#define TIMER_IMR_TAMIM 0x00000010 // GPTM Timer A Match Interrupt + // Mask +#define TIMER_IMR_RTCIM 0x00000008 // GPTM RTC Interrupt Mask +#define TIMER_IMR_CAEIM 0x00000004 // GPTM Timer A Capture Mode Event + // Interrupt Mask +#define TIMER_IMR_CAMIM 0x00000002 // GPTM Timer A Capture Mode Match + // Interrupt Mask +#define TIMER_IMR_TATOIM 0x00000001 // GPTM Timer A Time-Out Interrupt + // Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_RIS register. +// +//***************************************************************************** +#define TIMER_RIS_WUERIS 0x00010000 // 32/64-Bit Wide GPTM Write Update + // Error Raw Interrupt Status +#define TIMER_RIS_DMABRIS 0x00002000 // GPTM Timer B DMA Done Raw + // Interrupt Status +#define TIMER_RIS_TBMRIS 0x00000800 // GPTM Timer B Match Raw Interrupt +#define TIMER_RIS_CBERIS 0x00000400 // GPTM Timer B Capture Mode Event + // Raw Interrupt +#define TIMER_RIS_CBMRIS 0x00000200 // GPTM Timer B Capture Mode Match + // Raw Interrupt +#define TIMER_RIS_TBTORIS 0x00000100 // GPTM Timer B Time-Out Raw + // Interrupt +#define TIMER_RIS_DMAARIS 0x00000020 // GPTM Timer A DMA Done Raw + // Interrupt Status +#define TIMER_RIS_TAMRIS 0x00000010 // GPTM Timer A Match Raw Interrupt +#define TIMER_RIS_RTCRIS 0x00000008 // GPTM RTC Raw Interrupt +#define TIMER_RIS_CAERIS 0x00000004 // GPTM Timer A Capture Mode Event + // Raw Interrupt +#define TIMER_RIS_CAMRIS 0x00000002 // GPTM Timer A Capture Mode Match + // Raw Interrupt +#define TIMER_RIS_TATORIS 0x00000001 // GPTM Timer A Time-Out Raw + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_MIS register. +// +//***************************************************************************** +#define TIMER_MIS_WUEMIS 0x00010000 // 32/64-Bit Wide GPTM Write Update + // Error Masked Interrupt Status +#define TIMER_MIS_DMABMIS 0x00002000 // GPTM Timer B DMA Done Masked + // Interrupt +#define TIMER_MIS_TBMMIS 0x00000800 // GPTM Timer B Match Masked + // Interrupt +#define TIMER_MIS_CBEMIS 0x00000400 // GPTM Timer B Capture Mode Event + // Masked Interrupt +#define TIMER_MIS_CBMMIS 0x00000200 // GPTM Timer B Capture Mode Match + // Masked Interrupt +#define TIMER_MIS_TBTOMIS 0x00000100 // GPTM Timer B Time-Out Masked + // Interrupt +#define TIMER_MIS_DMAAMIS 0x00000020 // GPTM Timer A DMA Done Masked + // Interrupt +#define TIMER_MIS_TAMMIS 0x00000010 // GPTM Timer A Match Masked + // Interrupt +#define TIMER_MIS_RTCMIS 0x00000008 // GPTM RTC Masked Interrupt +#define TIMER_MIS_CAEMIS 0x00000004 // GPTM Timer A Capture Mode Event + // Masked Interrupt +#define TIMER_MIS_CAMMIS 0x00000002 // GPTM Timer A Capture Mode Match + // Masked Interrupt +#define TIMER_MIS_TATOMIS 0x00000001 // GPTM Timer A Time-Out Masked + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_ICR register. +// +//***************************************************************************** +#define TIMER_ICR_WUECINT 0x00010000 // 32/64-Bit Wide GPTM Write Update + // Error Interrupt Clear +#define TIMER_ICR_DMABINT 0x00002000 // GPTM Timer B DMA Done Interrupt + // Clear +#define TIMER_ICR_TBMCINT 0x00000800 // GPTM Timer B Match Interrupt + // Clear +#define TIMER_ICR_CBECINT 0x00000400 // GPTM Timer B Capture Mode Event + // Interrupt Clear +#define TIMER_ICR_CBMCINT 0x00000200 // GPTM Timer B Capture Mode Match + // Interrupt Clear +#define TIMER_ICR_TBTOCINT 0x00000100 // GPTM Timer B Time-Out Interrupt + // Clear +#define TIMER_ICR_DMAAINT 0x00000020 // GPTM Timer A DMA Done Interrupt + // Clear +#define TIMER_ICR_TAMCINT 0x00000010 // GPTM Timer A Match Interrupt + // Clear +#define TIMER_ICR_RTCCINT 0x00000008 // GPTM RTC Interrupt Clear +#define TIMER_ICR_CAECINT 0x00000004 // GPTM Timer A Capture Mode Event + // Interrupt Clear +#define TIMER_ICR_CAMCINT 0x00000002 // GPTM Timer A Capture Mode Match + // Interrupt Clear +#define TIMER_ICR_TATOCINT 0x00000001 // GPTM Timer A Time-Out Raw + // Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAILR register. +// +//***************************************************************************** +#define TIMER_TAILR_M 0xFFFFFFFF // GPTM Timer A Interval Load + // Register +#define TIMER_TAILR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBILR register. +// +//***************************************************************************** +#define TIMER_TBILR_M 0xFFFFFFFF // GPTM Timer B Interval Load + // Register +#define TIMER_TBILR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAMATCHR +// register. +// +//***************************************************************************** +#define TIMER_TAMATCHR_TAMR_M 0xFFFFFFFF // GPTM Timer A Match Register +#define TIMER_TAMATCHR_TAMR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBMATCHR +// register. +// +//***************************************************************************** +#define TIMER_TBMATCHR_TBMR_M 0xFFFFFFFF // GPTM Timer B Match Register +#define TIMER_TBMATCHR_TBMR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAPR register. +// +//***************************************************************************** +#define TIMER_TAPR_TAPSRH_M 0x0000FF00 // GPTM Timer A Prescale High Byte +#define TIMER_TAPR_TAPSR_M 0x000000FF // GPTM Timer A Prescale +#define TIMER_TAPR_TAPSRH_S 8 +#define TIMER_TAPR_TAPSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBPR register. +// +//***************************************************************************** +#define TIMER_TBPR_TBPSRH_M 0x0000FF00 // GPTM Timer B Prescale High Byte +#define TIMER_TBPR_TBPSR_M 0x000000FF // GPTM Timer B Prescale +#define TIMER_TBPR_TBPSRH_S 8 +#define TIMER_TBPR_TBPSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAPMR register. +// +//***************************************************************************** +#define TIMER_TAPMR_TAPSMRH_M 0x0000FF00 // GPTM Timer A Prescale Match High + // Byte +#define TIMER_TAPMR_TAPSMR_M 0x000000FF // GPTM TimerA Prescale Match +#define TIMER_TAPMR_TAPSMRH_S 8 +#define TIMER_TAPMR_TAPSMR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBPMR register. +// +//***************************************************************************** +#define TIMER_TBPMR_TBPSMRH_M 0x0000FF00 // GPTM Timer B Prescale Match High + // Byte +#define TIMER_TBPMR_TBPSMR_M 0x000000FF // GPTM TimerB Prescale Match +#define TIMER_TBPMR_TBPSMRH_S 8 +#define TIMER_TBPMR_TBPSMR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAR register. +// +//***************************************************************************** +#define TIMER_TAR_M 0xFFFFFFFF // GPTM Timer A Register +#define TIMER_TAR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBR register. +// +//***************************************************************************** +#define TIMER_TBR_M 0xFFFFFFFF // GPTM Timer B Register +#define TIMER_TBR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAV register. +// +//***************************************************************************** +#define TIMER_TAV_M 0xFFFFFFFF // GPTM Timer A Value +#define TIMER_TAV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBV register. +// +//***************************************************************************** +#define TIMER_TBV_M 0xFFFFFFFF // GPTM Timer B Value +#define TIMER_TBV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_RTCPD register. +// +//***************************************************************************** +#define TIMER_RTCPD_RTCPD_M 0x0000FFFF // RTC Predivide Counter Value +#define TIMER_RTCPD_RTCPD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAPS register. +// +//***************************************************************************** +#define TIMER_TAPS_PSS_M 0x0000FFFF // GPTM Timer A Prescaler Snapshot +#define TIMER_TAPS_PSS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBPS register. +// +//***************************************************************************** +#define TIMER_TBPS_PSS_M 0x0000FFFF // GPTM Timer A Prescaler Value +#define TIMER_TBPS_PSS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TAPV register. +// +//***************************************************************************** +#define TIMER_TAPV_PSV_M 0x0000FFFF // GPTM Timer A Prescaler Value +#define TIMER_TAPV_PSV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_TBPV register. +// +//***************************************************************************** +#define TIMER_TBPV_PSV_M 0x0000FFFF // GPTM Timer B Prescaler Value +#define TIMER_TBPV_PSV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_DMAEV register. +// +//***************************************************************************** +#define TIMER_DMAEV_TBMDMAEN 0x00000800 // GPTM B Mode Match Event DMA + // Trigger Enable +#define TIMER_DMAEV_CBEDMAEN 0x00000400 // GPTM B Capture Event DMA Trigger + // Enable +#define TIMER_DMAEV_CBMDMAEN 0x00000200 // GPTM B Capture Match Event DMA + // Trigger Enable +#define TIMER_DMAEV_TBTODMAEN 0x00000100 // GPTM B Time-Out Event DMA + // Trigger Enable +#define TIMER_DMAEV_TAMDMAEN 0x00000010 // GPTM A Mode Match Event DMA + // Trigger Enable +#define TIMER_DMAEV_RTCDMAEN 0x00000008 // GPTM A RTC Match Event DMA + // Trigger Enable +#define TIMER_DMAEV_CAEDMAEN 0x00000004 // GPTM A Capture Event DMA Trigger + // Enable +#define TIMER_DMAEV_CAMDMAEN 0x00000002 // GPTM A Capture Match Event DMA + // Trigger Enable +#define TIMER_DMAEV_TATODMAEN 0x00000001 // GPTM A Time-Out Event DMA + // Trigger Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_ADCEV register. +// +//***************************************************************************** +#define TIMER_ADCEV_TBMADCEN 0x00000800 // GPTM B Mode Match Event ADC + // Trigger Enable +#define TIMER_ADCEV_CBEADCEN 0x00000400 // GPTM B Capture Event ADC Trigger + // Enable +#define TIMER_ADCEV_CBMADCEN 0x00000200 // GPTM B Capture Match Event ADC + // Trigger Enable +#define TIMER_ADCEV_TBTOADCEN 0x00000100 // GPTM B Time-Out Event ADC + // Trigger Enable +#define TIMER_ADCEV_TAMADCEN 0x00000010 // GPTM A Mode Match Event ADC + // Trigger Enable +#define TIMER_ADCEV_RTCADCEN 0x00000008 // GPTM RTC Match Event ADC Trigger + // Enable +#define TIMER_ADCEV_CAEADCEN 0x00000004 // GPTM A Capture Event ADC Trigger + // Enable +#define TIMER_ADCEV_CAMADCEN 0x00000002 // GPTM A Capture Match Event ADC + // Trigger Enable +#define TIMER_ADCEV_TATOADCEN 0x00000001 // GPTM A Time-Out Event ADC + // Trigger Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_PP register. +// +//***************************************************************************** +#define TIMER_PP_ALTCLK 0x00000040 // Alternate Clock Source +#define TIMER_PP_SYNCCNT 0x00000020 // Synchronize Start +#define TIMER_PP_CHAIN 0x00000010 // Chain with Other Timers +#define TIMER_PP_SIZE_M 0x0000000F // Count Size +#define TIMER_PP_SIZE_16 0x00000000 // Timer A and Timer B counters are + // 16 bits each with an 8-bit + // prescale counter +#define TIMER_PP_SIZE_32 0x00000001 // Timer A and Timer B counters are + // 32 bits each with a 16-bit + // prescale counter + +//***************************************************************************** +// +// The following are defines for the bit fields in the TIMER_O_CC register. +// +//***************************************************************************** +#define TIMER_CC_ALTCLK 0x00000001 // Alternate Clock Source + +#endif // __HW_TIMER_H__ diff --git a/os/common/ext/TivaWare/inc/hw_types.h b/os/common/ext/TivaWare/inc/hw_types.h new file mode 100644 index 0000000..6312a28 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_types.h @@ -0,0 +1,147 @@ +//***************************************************************************** +// +// hw_types.h - Common types and macros. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_TYPES_H__ +#define __HW_TYPES_H__ + +//***************************************************************************** +// +// Macros for hardware access, both direct and via the bit-band region. +// +//***************************************************************************** +#define HWREG(x) \ + (*((volatile uint32_t *)(x))) +#define HWREGH(x) \ + (*((volatile uint16_t *)(x))) +#define HWREGB(x) \ + (*((volatile uint8_t *)(x))) +#define HWREGBITW(x, b) \ + HWREG(((uint32_t)(x) & 0xF0000000) | 0x02000000 | \ + (((uint32_t)(x) & 0x000FFFFF) << 5) | ((b) << 2)) +#define HWREGBITH(x, b) \ + HWREGH(((uint32_t)(x) & 0xF0000000) | 0x02000000 | \ + (((uint32_t)(x) & 0x000FFFFF) << 5) | ((b) << 2)) +#define HWREGBITB(x, b) \ + HWREGB(((uint32_t)(x) & 0xF0000000) | 0x02000000 | \ + (((uint32_t)(x) & 0x000FFFFF) << 5) | ((b) << 2)) + +//***************************************************************************** +// +// Helper Macros for determining silicon revisions, etc. +// +// These macros will be used by Driverlib at "run-time" to create necessary +// conditional code blocks that will allow a single version of the Driverlib +// "binary" code to support multiple(all) Tiva silicon revisions. +// +// It is expected that these macros will be used inside of a standard 'C' +// conditional block of code, e.g. +// +// if(CLASS_IS_TM4C123) +// { +// do some TM4C123-class specific code here. +// } +// +// By default, these macros will be defined as run-time checks of the +// appropriate register(s) to allow creation of run-time conditional code +// blocks for a common DriverLib across the entire Tiva family. +// +// However, if code-space optimization is required, these macros can be "hard- +// coded" for a specific version of Tiva silicon. Many compilers will then +// detect the "hard-coded" conditionals, and appropriately optimize the code +// blocks, eliminating any "unreachable" code. This would result in a smaller +// Driverlib, thus producing a smaller final application size, but at the cost +// of limiting the Driverlib binary to a specific Tiva silicon revision. +// +//***************************************************************************** +#ifndef CLASS_IS_TM4C123 +#define CLASS_IS_TM4C123 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_VER_M | SYSCTL_DID0_CLASS_M)) == \ + (SYSCTL_DID0_VER_1 | SYSCTL_DID0_CLASS_TM4C123)) +#endif + +#ifndef CLASS_IS_TM4C129 +#define CLASS_IS_TM4C129 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_VER_M | SYSCTL_DID0_CLASS_M)) == \ + (SYSCTL_DID0_VER_1 | SYSCTL_DID0_CLASS_TM4C129)) +#endif + +#ifndef REVISION_IS_A0 +#define REVISION_IS_A0 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \ + (SYSCTL_DID0_MAJ_REVA | SYSCTL_DID0_MIN_0)) +#endif + +#ifndef REVISION_IS_A1 +#define REVISION_IS_A1 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \ + (SYSCTL_DID0_MAJ_REVA | SYSCTL_DID0_MIN_0)) +#endif + +#ifndef REVISION_IS_A2 +#define REVISION_IS_A2 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \ + (SYSCTL_DID0_MAJ_REVA | SYSCTL_DID0_MIN_2)) +#endif + +#ifndef REVISION_IS_B0 +#define REVISION_IS_B0 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \ + (SYSCTL_DID0_MAJ_REVB | SYSCTL_DID0_MIN_0)) +#endif + +#ifndef REVISION_IS_B1 +#define REVISION_IS_B1 \ + ((HWREG(SYSCTL_DID0) & (SYSCTL_DID0_MAJ_M | SYSCTL_DID0_MIN_M)) == \ + (SYSCTL_DID0_MAJ_REVB | SYSCTL_DID0_MIN_1)) +#endif + +//***************************************************************************** +// +// For TivaWare 2.1, we removed all references to Tiva IC codenames from the +// source. To ensure that existing customer code doesn't break as a result +// of this change, make sure that the old definitions are still available at +// least for the time being. +// +//***************************************************************************** +#ifndef DEPRECATED +#define CLASS_IS_BLIZZARD CLASS_IS_TM4C123 +#define CLASS_IS_SNOWFLAKE CLASS_IS_TM4C123 +#endif + +#endif // __HW_TYPES_H__ diff --git a/os/common/ext/TivaWare/inc/hw_uart.h b/os/common/ext/TivaWare/inc/hw_uart.h new file mode 100644 index 0000000..cca4b93 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_uart.h @@ -0,0 +1,367 @@ +//***************************************************************************** +// +// hw_uart.h - Macros and defines used when accessing the UART hardware. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_UART_H__ +#define __HW_UART_H__ + +//***************************************************************************** +// +// The following are defines for the UART register offsets. +// +//***************************************************************************** +#define UART_O_DR 0x00000000 // UART Data +#define UART_O_RSR 0x00000004 // UART Receive Status/Error Clear +#define UART_O_ECR 0x00000004 // UART Receive Status/Error Clear +#define UART_O_FR 0x00000018 // UART Flag +#define UART_O_ILPR 0x00000020 // UART IrDA Low-Power Register +#define UART_O_IBRD 0x00000024 // UART Integer Baud-Rate Divisor +#define UART_O_FBRD 0x00000028 // UART Fractional Baud-Rate + // Divisor +#define UART_O_LCRH 0x0000002C // UART Line Control +#define UART_O_CTL 0x00000030 // UART Control +#define UART_O_IFLS 0x00000034 // UART Interrupt FIFO Level Select +#define UART_O_IM 0x00000038 // UART Interrupt Mask +#define UART_O_RIS 0x0000003C // UART Raw Interrupt Status +#define UART_O_MIS 0x00000040 // UART Masked Interrupt Status +#define UART_O_ICR 0x00000044 // UART Interrupt Clear +#define UART_O_DMACTL 0x00000048 // UART DMA Control +#define UART_O_9BITADDR 0x000000A4 // UART 9-Bit Self Address +#define UART_O_9BITAMASK 0x000000A8 // UART 9-Bit Self Address Mask +#define UART_O_PP 0x00000FC0 // UART Peripheral Properties +#define UART_O_CC 0x00000FC8 // UART Clock Configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_DR register. +// +//***************************************************************************** +#define UART_DR_OE 0x00000800 // UART Overrun Error +#define UART_DR_BE 0x00000400 // UART Break Error +#define UART_DR_PE 0x00000200 // UART Parity Error +#define UART_DR_FE 0x00000100 // UART Framing Error +#define UART_DR_DATA_M 0x000000FF // Data Transmitted or Received +#define UART_DR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_RSR register. +// +//***************************************************************************** +#define UART_RSR_OE 0x00000008 // UART Overrun Error +#define UART_RSR_BE 0x00000004 // UART Break Error +#define UART_RSR_PE 0x00000002 // UART Parity Error +#define UART_RSR_FE 0x00000001 // UART Framing Error + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ECR register. +// +//***************************************************************************** +#define UART_ECR_DATA_M 0x000000FF // Error Clear +#define UART_ECR_DATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_FR register. +// +//***************************************************************************** +#define UART_FR_RI 0x00000100 // Ring Indicator +#define UART_FR_TXFE 0x00000080 // UART Transmit FIFO Empty +#define UART_FR_RXFF 0x00000040 // UART Receive FIFO Full +#define UART_FR_TXFF 0x00000020 // UART Transmit FIFO Full +#define UART_FR_RXFE 0x00000010 // UART Receive FIFO Empty +#define UART_FR_BUSY 0x00000008 // UART Busy +#define UART_FR_DCD 0x00000004 // Data Carrier Detect +#define UART_FR_DSR 0x00000002 // Data Set Ready +#define UART_FR_CTS 0x00000001 // Clear To Send + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ILPR register. +// +//***************************************************************************** +#define UART_ILPR_ILPDVSR_M 0x000000FF // IrDA Low-Power Divisor +#define UART_ILPR_ILPDVSR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IBRD register. +// +//***************************************************************************** +#define UART_IBRD_DIVINT_M 0x0000FFFF // Integer Baud-Rate Divisor +#define UART_IBRD_DIVINT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_FBRD register. +// +//***************************************************************************** +#define UART_FBRD_DIVFRAC_M 0x0000003F // Fractional Baud-Rate Divisor +#define UART_FBRD_DIVFRAC_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_LCRH register. +// +//***************************************************************************** +#define UART_LCRH_SPS 0x00000080 // UART Stick Parity Select +#define UART_LCRH_WLEN_M 0x00000060 // UART Word Length +#define UART_LCRH_WLEN_5 0x00000000 // 5 bits (default) +#define UART_LCRH_WLEN_6 0x00000020 // 6 bits +#define UART_LCRH_WLEN_7 0x00000040 // 7 bits +#define UART_LCRH_WLEN_8 0x00000060 // 8 bits +#define UART_LCRH_FEN 0x00000010 // UART Enable FIFOs +#define UART_LCRH_STP2 0x00000008 // UART Two Stop Bits Select +#define UART_LCRH_EPS 0x00000004 // UART Even Parity Select +#define UART_LCRH_PEN 0x00000002 // UART Parity Enable +#define UART_LCRH_BRK 0x00000001 // UART Send Break + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_CTL register. +// +//***************************************************************************** +#define UART_CTL_CTSEN 0x00008000 // Enable Clear To Send +#define UART_CTL_RTSEN 0x00004000 // Enable Request to Send +#define UART_CTL_RTS 0x00000800 // Request to Send +#define UART_CTL_DTR 0x00000400 // Data Terminal Ready +#define UART_CTL_RXE 0x00000200 // UART Receive Enable +#define UART_CTL_TXE 0x00000100 // UART Transmit Enable +#define UART_CTL_LBE 0x00000080 // UART Loop Back Enable +#define UART_CTL_HSE 0x00000020 // High-Speed Enable +#define UART_CTL_EOT 0x00000010 // End of Transmission +#define UART_CTL_SMART 0x00000008 // ISO 7816 Smart Card Support +#define UART_CTL_SIRLP 0x00000004 // UART SIR Low-Power Mode +#define UART_CTL_SIREN 0x00000002 // UART SIR Enable +#define UART_CTL_UARTEN 0x00000001 // UART Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IFLS register. +// +//***************************************************************************** +#define UART_IFLS_RX_M 0x00000038 // UART Receive Interrupt FIFO + // Level Select +#define UART_IFLS_RX1_8 0x00000000 // RX FIFO >= 1/8 full +#define UART_IFLS_RX2_8 0x00000008 // RX FIFO >= 1/4 full +#define UART_IFLS_RX4_8 0x00000010 // RX FIFO >= 1/2 full (default) +#define UART_IFLS_RX6_8 0x00000018 // RX FIFO >= 3/4 full +#define UART_IFLS_RX7_8 0x00000020 // RX FIFO >= 7/8 full +#define UART_IFLS_TX_M 0x00000007 // UART Transmit Interrupt FIFO + // Level Select +#define UART_IFLS_TX1_8 0x00000000 // TX FIFO <= 1/8 full +#define UART_IFLS_TX2_8 0x00000001 // TX FIFO <= 1/4 full +#define UART_IFLS_TX4_8 0x00000002 // TX FIFO <= 1/2 full (default) +#define UART_IFLS_TX6_8 0x00000003 // TX FIFO <= 3/4 full +#define UART_IFLS_TX7_8 0x00000004 // TX FIFO <= 7/8 full + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_IM register. +// +//***************************************************************************** +#define UART_IM_DMATXIM 0x00020000 // Transmit DMA Interrupt Mask +#define UART_IM_DMARXIM 0x00010000 // Receive DMA Interrupt Mask +#define UART_IM_9BITIM 0x00001000 // 9-Bit Mode Interrupt Mask +#define UART_IM_EOTIM 0x00000800 // End of Transmission Interrupt + // Mask +#define UART_IM_OEIM 0x00000400 // UART Overrun Error Interrupt + // Mask +#define UART_IM_BEIM 0x00000200 // UART Break Error Interrupt Mask +#define UART_IM_PEIM 0x00000100 // UART Parity Error Interrupt Mask +#define UART_IM_FEIM 0x00000080 // UART Framing Error Interrupt + // Mask +#define UART_IM_RTIM 0x00000040 // UART Receive Time-Out Interrupt + // Mask +#define UART_IM_TXIM 0x00000020 // UART Transmit Interrupt Mask +#define UART_IM_RXIM 0x00000010 // UART Receive Interrupt Mask +#define UART_IM_DSRMIM 0x00000008 // UART Data Set Ready Modem + // Interrupt Mask +#define UART_IM_DCDMIM 0x00000004 // UART Data Carrier Detect Modem + // Interrupt Mask +#define UART_IM_CTSMIM 0x00000002 // UART Clear to Send Modem + // Interrupt Mask +#define UART_IM_RIMIM 0x00000001 // UART Ring Indicator Modem + // Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_RIS register. +// +//***************************************************************************** +#define UART_RIS_DMATXRIS 0x00020000 // Transmit DMA Raw Interrupt + // Status +#define UART_RIS_DMARXRIS 0x00010000 // Receive DMA Raw Interrupt Status +#define UART_RIS_9BITRIS 0x00001000 // 9-Bit Mode Raw Interrupt Status +#define UART_RIS_EOTRIS 0x00000800 // End of Transmission Raw + // Interrupt Status +#define UART_RIS_OERIS 0x00000400 // UART Overrun Error Raw Interrupt + // Status +#define UART_RIS_BERIS 0x00000200 // UART Break Error Raw Interrupt + // Status +#define UART_RIS_PERIS 0x00000100 // UART Parity Error Raw Interrupt + // Status +#define UART_RIS_FERIS 0x00000080 // UART Framing Error Raw Interrupt + // Status +#define UART_RIS_RTRIS 0x00000040 // UART Receive Time-Out Raw + // Interrupt Status +#define UART_RIS_TXRIS 0x00000020 // UART Transmit Raw Interrupt + // Status +#define UART_RIS_RXRIS 0x00000010 // UART Receive Raw Interrupt + // Status +#define UART_RIS_DSRRIS 0x00000008 // UART Data Set Ready Modem Raw + // Interrupt Status +#define UART_RIS_DCDRIS 0x00000004 // UART Data Carrier Detect Modem + // Raw Interrupt Status +#define UART_RIS_CTSRIS 0x00000002 // UART Clear to Send Modem Raw + // Interrupt Status +#define UART_RIS_RIRIS 0x00000001 // UART Ring Indicator Modem Raw + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_MIS register. +// +//***************************************************************************** +#define UART_MIS_DMATXMIS 0x00020000 // Transmit DMA Masked Interrupt + // Status +#define UART_MIS_DMARXMIS 0x00010000 // Receive DMA Masked Interrupt + // Status +#define UART_MIS_9BITMIS 0x00001000 // 9-Bit Mode Masked Interrupt + // Status +#define UART_MIS_EOTMIS 0x00000800 // End of Transmission Masked + // Interrupt Status +#define UART_MIS_OEMIS 0x00000400 // UART Overrun Error Masked + // Interrupt Status +#define UART_MIS_BEMIS 0x00000200 // UART Break Error Masked + // Interrupt Status +#define UART_MIS_PEMIS 0x00000100 // UART Parity Error Masked + // Interrupt Status +#define UART_MIS_FEMIS 0x00000080 // UART Framing Error Masked + // Interrupt Status +#define UART_MIS_RTMIS 0x00000040 // UART Receive Time-Out Masked + // Interrupt Status +#define UART_MIS_TXMIS 0x00000020 // UART Transmit Masked Interrupt + // Status +#define UART_MIS_RXMIS 0x00000010 // UART Receive Masked Interrupt + // Status +#define UART_MIS_DSRMIS 0x00000008 // UART Data Set Ready Modem Masked + // Interrupt Status +#define UART_MIS_DCDMIS 0x00000004 // UART Data Carrier Detect Modem + // Masked Interrupt Status +#define UART_MIS_CTSMIS 0x00000002 // UART Clear to Send Modem Masked + // Interrupt Status +#define UART_MIS_RIMIS 0x00000001 // UART Ring Indicator Modem Masked + // Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_ICR register. +// +//***************************************************************************** +#define UART_ICR_DMATXIC 0x00020000 // Transmit DMA Interrupt Clear +#define UART_ICR_DMARXIC 0x00010000 // Receive DMA Interrupt Clear +#define UART_ICR_9BITIC 0x00001000 // 9-Bit Mode Interrupt Clear +#define UART_ICR_EOTIC 0x00000800 // End of Transmission Interrupt + // Clear +#define UART_ICR_OEIC 0x00000400 // Overrun Error Interrupt Clear +#define UART_ICR_BEIC 0x00000200 // Break Error Interrupt Clear +#define UART_ICR_PEIC 0x00000100 // Parity Error Interrupt Clear +#define UART_ICR_FEIC 0x00000080 // Framing Error Interrupt Clear +#define UART_ICR_RTIC 0x00000040 // Receive Time-Out Interrupt Clear +#define UART_ICR_TXIC 0x00000020 // Transmit Interrupt Clear +#define UART_ICR_RXIC 0x00000010 // Receive Interrupt Clear +#define UART_ICR_DSRMIC 0x00000008 // UART Data Set Ready Modem + // Interrupt Clear +#define UART_ICR_DCDMIC 0x00000004 // UART Data Carrier Detect Modem + // Interrupt Clear +#define UART_ICR_CTSMIC 0x00000002 // UART Clear to Send Modem + // Interrupt Clear +#define UART_ICR_RIMIC 0x00000001 // UART Ring Indicator Modem + // Interrupt Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_DMACTL register. +// +//***************************************************************************** +#define UART_DMACTL_DMAERR 0x00000004 // DMA on Error +#define UART_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable +#define UART_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_9BITADDR +// register. +// +//***************************************************************************** +#define UART_9BITADDR_9BITEN 0x00008000 // Enable 9-Bit Mode +#define UART_9BITADDR_ADDR_M 0x000000FF // Self Address for 9-Bit Mode +#define UART_9BITADDR_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_9BITAMASK +// register. +// +//***************************************************************************** +#define UART_9BITAMASK_MASK_M 0x000000FF // Self Address Mask for 9-Bit Mode +#define UART_9BITAMASK_MASK_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_PP register. +// +//***************************************************************************** +#define UART_PP_MSE 0x00000008 // Modem Support Extended +#define UART_PP_MS 0x00000004 // Modem Support +#define UART_PP_NB 0x00000002 // 9-Bit Support +#define UART_PP_SC 0x00000001 // Smart Card Support + +//***************************************************************************** +// +// The following are defines for the bit fields in the UART_O_CC register. +// +//***************************************************************************** +#define UART_CC_CS_M 0x0000000F // UART Baud Clock Source +#define UART_CC_CS_SYSCLK 0x00000000 // System clock (based on clock + // source and divisor factor) +#define UART_CC_CS_PIOSC 0x00000005 // PIOSC + +#endif // __HW_UART_H__ diff --git a/os/common/ext/TivaWare/inc/hw_udma.h b/os/common/ext/TivaWare/inc/hw_udma.h new file mode 100644 index 0000000..85bc014 --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_udma.h @@ -0,0 +1,414 @@ +//***************************************************************************** +// +// hw_udma.h - Macros for use in accessing the UDMA registers. +// +// Copyright (c) 2007-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_UDMA_H__ +#define __HW_UDMA_H__ + +//***************************************************************************** +// +// The following are defines for the Micro Direct Memory Access register +// addresses. +// +//***************************************************************************** +#define UDMA_STAT 0x400FF000 // DMA Status +#define UDMA_CFG 0x400FF004 // DMA Configuration +#define UDMA_CTLBASE 0x400FF008 // DMA Channel Control Base Pointer +#define UDMA_ALTBASE 0x400FF00C // DMA Alternate Channel Control + // Base Pointer +#define UDMA_WAITSTAT 0x400FF010 // DMA Channel Wait-on-Request + // Status +#define UDMA_SWREQ 0x400FF014 // DMA Channel Software Request +#define UDMA_USEBURSTSET 0x400FF018 // DMA Channel Useburst Set +#define UDMA_USEBURSTCLR 0x400FF01C // DMA Channel Useburst Clear +#define UDMA_REQMASKSET 0x400FF020 // DMA Channel Request Mask Set +#define UDMA_REQMASKCLR 0x400FF024 // DMA Channel Request Mask Clear +#define UDMA_ENASET 0x400FF028 // DMA Channel Enable Set +#define UDMA_ENACLR 0x400FF02C // DMA Channel Enable Clear +#define UDMA_ALTSET 0x400FF030 // DMA Channel Primary Alternate + // Set +#define UDMA_ALTCLR 0x400FF034 // DMA Channel Primary Alternate + // Clear +#define UDMA_PRIOSET 0x400FF038 // DMA Channel Priority Set +#define UDMA_PRIOCLR 0x400FF03C // DMA Channel Priority Clear +#define UDMA_ERRCLR 0x400FF04C // DMA Bus Error Clear +#define UDMA_CHASGN 0x400FF500 // DMA Channel Assignment +#define UDMA_CHIS 0x400FF504 // DMA Channel Interrupt Status +#define UDMA_CHMAP0 0x400FF510 // DMA Channel Map Select 0 +#define UDMA_CHMAP1 0x400FF514 // DMA Channel Map Select 1 +#define UDMA_CHMAP2 0x400FF518 // DMA Channel Map Select 2 +#define UDMA_CHMAP3 0x400FF51C // DMA Channel Map Select 3 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_STAT register. +// +//***************************************************************************** +#define UDMA_STAT_DMACHANS_M 0x001F0000 // Available uDMA Channels Minus 1 +#define UDMA_STAT_STATE_M 0x000000F0 // Control State Machine Status +#define UDMA_STAT_STATE_IDLE 0x00000000 // Idle +#define UDMA_STAT_STATE_RD_CTRL 0x00000010 // Reading channel controller data +#define UDMA_STAT_STATE_RD_SRCENDP \ + 0x00000020 // Reading source end pointer +#define UDMA_STAT_STATE_RD_DSTENDP \ + 0x00000030 // Reading destination end pointer +#define UDMA_STAT_STATE_RD_SRCDAT \ + 0x00000040 // Reading source data +#define UDMA_STAT_STATE_WR_DSTDAT \ + 0x00000050 // Writing destination data +#define UDMA_STAT_STATE_WAIT 0x00000060 // Waiting for uDMA request to + // clear +#define UDMA_STAT_STATE_WR_CTRL 0x00000070 // Writing channel controller data +#define UDMA_STAT_STATE_STALL 0x00000080 // Stalled +#define UDMA_STAT_STATE_DONE 0x00000090 // Done +#define UDMA_STAT_STATE_UNDEF 0x000000A0 // Undefined +#define UDMA_STAT_MASTEN 0x00000001 // Master Enable Status +#define UDMA_STAT_DMACHANS_S 16 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CFG register. +// +//***************************************************************************** +#define UDMA_CFG_MASTEN 0x00000001 // Controller Master Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CTLBASE register. +// +//***************************************************************************** +#define UDMA_CTLBASE_ADDR_M 0xFFFFFC00 // Channel Control Base Address +#define UDMA_CTLBASE_ADDR_S 10 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ALTBASE register. +// +//***************************************************************************** +#define UDMA_ALTBASE_ADDR_M 0xFFFFFFFF // Alternate Channel Address + // Pointer +#define UDMA_ALTBASE_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_WAITSTAT register. +// +//***************************************************************************** +#define UDMA_WAITSTAT_WAITREQ_M 0xFFFFFFFF // Channel [n] Wait Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_SWREQ register. +// +//***************************************************************************** +#define UDMA_SWREQ_M 0xFFFFFFFF // Channel [n] Software Request + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_USEBURSTSET +// register. +// +//***************************************************************************** +#define UDMA_USEBURSTSET_SET_M 0xFFFFFFFF // Channel [n] Useburst Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_USEBURSTCLR +// register. +// +//***************************************************************************** +#define UDMA_USEBURSTCLR_CLR_M 0xFFFFFFFF // Channel [n] Useburst Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_REQMASKSET +// register. +// +//***************************************************************************** +#define UDMA_REQMASKSET_SET_M 0xFFFFFFFF // Channel [n] Request Mask Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_REQMASKCLR +// register. +// +//***************************************************************************** +#define UDMA_REQMASKCLR_CLR_M 0xFFFFFFFF // Channel [n] Request Mask Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ENASET register. +// +//***************************************************************************** +#define UDMA_ENASET_SET_M 0xFFFFFFFF // Channel [n] Enable Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ENACLR register. +// +//***************************************************************************** +#define UDMA_ENACLR_CLR_M 0xFFFFFFFF // Clear Channel [n] Enable Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ALTSET register. +// +//***************************************************************************** +#define UDMA_ALTSET_SET_M 0xFFFFFFFF // Channel [n] Alternate Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ALTCLR register. +// +//***************************************************************************** +#define UDMA_ALTCLR_CLR_M 0xFFFFFFFF // Channel [n] Alternate Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_PRIOSET register. +// +//***************************************************************************** +#define UDMA_PRIOSET_SET_M 0xFFFFFFFF // Channel [n] Priority Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_PRIOCLR register. +// +//***************************************************************************** +#define UDMA_PRIOCLR_CLR_M 0xFFFFFFFF // Channel [n] Priority Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_ERRCLR register. +// +//***************************************************************************** +#define UDMA_ERRCLR_ERRCLR 0x00000001 // uDMA Bus Error Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CHASGN register. +// +//***************************************************************************** +#define UDMA_CHASGN_M 0xFFFFFFFF // Channel [n] Assignment Select +#define UDMA_CHASGN_PRIMARY 0x00000000 // Use the primary channel + // assignment +#define UDMA_CHASGN_SECONDARY 0x00000001 // Use the secondary channel + // assignment + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CHIS register. +// +//***************************************************************************** +#define UDMA_CHIS_M 0xFFFFFFFF // Channel [n] Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CHMAP0 register. +// +//***************************************************************************** +#define UDMA_CHMAP0_CH7SEL_M 0xF0000000 // uDMA Channel 7 Source Select +#define UDMA_CHMAP0_CH6SEL_M 0x0F000000 // uDMA Channel 6 Source Select +#define UDMA_CHMAP0_CH5SEL_M 0x00F00000 // uDMA Channel 5 Source Select +#define UDMA_CHMAP0_CH4SEL_M 0x000F0000 // uDMA Channel 4 Source Select +#define UDMA_CHMAP0_CH3SEL_M 0x0000F000 // uDMA Channel 3 Source Select +#define UDMA_CHMAP0_CH2SEL_M 0x00000F00 // uDMA Channel 2 Source Select +#define UDMA_CHMAP0_CH1SEL_M 0x000000F0 // uDMA Channel 1 Source Select +#define UDMA_CHMAP0_CH0SEL_M 0x0000000F // uDMA Channel 0 Source Select +#define UDMA_CHMAP0_CH7SEL_S 28 +#define UDMA_CHMAP0_CH6SEL_S 24 +#define UDMA_CHMAP0_CH5SEL_S 20 +#define UDMA_CHMAP0_CH4SEL_S 16 +#define UDMA_CHMAP0_CH3SEL_S 12 +#define UDMA_CHMAP0_CH2SEL_S 8 +#define UDMA_CHMAP0_CH1SEL_S 4 +#define UDMA_CHMAP0_CH0SEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CHMAP1 register. +// +//***************************************************************************** +#define UDMA_CHMAP1_CH15SEL_M 0xF0000000 // uDMA Channel 15 Source Select +#define UDMA_CHMAP1_CH14SEL_M 0x0F000000 // uDMA Channel 14 Source Select +#define UDMA_CHMAP1_CH13SEL_M 0x00F00000 // uDMA Channel 13 Source Select +#define UDMA_CHMAP1_CH12SEL_M 0x000F0000 // uDMA Channel 12 Source Select +#define UDMA_CHMAP1_CH11SEL_M 0x0000F000 // uDMA Channel 11 Source Select +#define UDMA_CHMAP1_CH10SEL_M 0x00000F00 // uDMA Channel 10 Source Select +#define UDMA_CHMAP1_CH9SEL_M 0x000000F0 // uDMA Channel 9 Source Select +#define UDMA_CHMAP1_CH8SEL_M 0x0000000F // uDMA Channel 8 Source Select +#define UDMA_CHMAP1_CH15SEL_S 28 +#define UDMA_CHMAP1_CH14SEL_S 24 +#define UDMA_CHMAP1_CH13SEL_S 20 +#define UDMA_CHMAP1_CH12SEL_S 16 +#define UDMA_CHMAP1_CH11SEL_S 12 +#define UDMA_CHMAP1_CH10SEL_S 8 +#define UDMA_CHMAP1_CH9SEL_S 4 +#define UDMA_CHMAP1_CH8SEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CHMAP2 register. +// +//***************************************************************************** +#define UDMA_CHMAP2_CH23SEL_M 0xF0000000 // uDMA Channel 23 Source Select +#define UDMA_CHMAP2_CH22SEL_M 0x0F000000 // uDMA Channel 22 Source Select +#define UDMA_CHMAP2_CH21SEL_M 0x00F00000 // uDMA Channel 21 Source Select +#define UDMA_CHMAP2_CH20SEL_M 0x000F0000 // uDMA Channel 20 Source Select +#define UDMA_CHMAP2_CH19SEL_M 0x0000F000 // uDMA Channel 19 Source Select +#define UDMA_CHMAP2_CH18SEL_M 0x00000F00 // uDMA Channel 18 Source Select +#define UDMA_CHMAP2_CH17SEL_M 0x000000F0 // uDMA Channel 17 Source Select +#define UDMA_CHMAP2_CH16SEL_M 0x0000000F // uDMA Channel 16 Source Select +#define UDMA_CHMAP2_CH23SEL_S 28 +#define UDMA_CHMAP2_CH22SEL_S 24 +#define UDMA_CHMAP2_CH21SEL_S 20 +#define UDMA_CHMAP2_CH20SEL_S 16 +#define UDMA_CHMAP2_CH19SEL_S 12 +#define UDMA_CHMAP2_CH18SEL_S 8 +#define UDMA_CHMAP2_CH17SEL_S 4 +#define UDMA_CHMAP2_CH16SEL_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_CHMAP3 register. +// +//***************************************************************************** +#define UDMA_CHMAP3_CH31SEL_M 0xF0000000 // uDMA Channel 31 Source Select +#define UDMA_CHMAP3_CH30SEL_M 0x0F000000 // uDMA Channel 30 Source Select +#define UDMA_CHMAP3_CH29SEL_M 0x00F00000 // uDMA Channel 29 Source Select +#define UDMA_CHMAP3_CH28SEL_M 0x000F0000 // uDMA Channel 28 Source Select +#define UDMA_CHMAP3_CH27SEL_M 0x0000F000 // uDMA Channel 27 Source Select +#define UDMA_CHMAP3_CH26SEL_M 0x00000F00 // uDMA Channel 26 Source Select +#define UDMA_CHMAP3_CH25SEL_M 0x000000F0 // uDMA Channel 25 Source Select +#define UDMA_CHMAP3_CH24SEL_M 0x0000000F // uDMA Channel 24 Source Select +#define UDMA_CHMAP3_CH31SEL_S 28 +#define UDMA_CHMAP3_CH30SEL_S 24 +#define UDMA_CHMAP3_CH29SEL_S 20 +#define UDMA_CHMAP3_CH28SEL_S 16 +#define UDMA_CHMAP3_CH27SEL_S 12 +#define UDMA_CHMAP3_CH26SEL_S 8 +#define UDMA_CHMAP3_CH25SEL_S 4 +#define UDMA_CHMAP3_CH24SEL_S 0 + +//***************************************************************************** +// +// The following are defines for the Micro Direct Memory Access (uDMA) offsets. +// +//***************************************************************************** +#define UDMA_O_SRCENDP 0x00000000 // DMA Channel Source Address End + // Pointer +#define UDMA_O_DSTENDP 0x00000004 // DMA Channel Destination Address + // End Pointer +#define UDMA_O_CHCTL 0x00000008 // DMA Channel Control Word + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_O_SRCENDP register. +// +//***************************************************************************** +#define UDMA_SRCENDP_ADDR_M 0xFFFFFFFF // Source Address End Pointer +#define UDMA_SRCENDP_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_O_DSTENDP register. +// +//***************************************************************************** +#define UDMA_DSTENDP_ADDR_M 0xFFFFFFFF // Destination Address End Pointer +#define UDMA_DSTENDP_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the UDMA_O_CHCTL register. +// +//***************************************************************************** +#define UDMA_CHCTL_DSTINC_M 0xC0000000 // Destination Address Increment +#define UDMA_CHCTL_DSTINC_8 0x00000000 // Byte +#define UDMA_CHCTL_DSTINC_16 0x40000000 // Half-word +#define UDMA_CHCTL_DSTINC_32 0x80000000 // Word +#define UDMA_CHCTL_DSTINC_NONE 0xC0000000 // No increment +#define UDMA_CHCTL_DSTSIZE_M 0x30000000 // Destination Data Size +#define UDMA_CHCTL_DSTSIZE_8 0x00000000 // Byte +#define UDMA_CHCTL_DSTSIZE_16 0x10000000 // Half-word +#define UDMA_CHCTL_DSTSIZE_32 0x20000000 // Word +#define UDMA_CHCTL_SRCINC_M 0x0C000000 // Source Address Increment +#define UDMA_CHCTL_SRCINC_8 0x00000000 // Byte +#define UDMA_CHCTL_SRCINC_16 0x04000000 // Half-word +#define UDMA_CHCTL_SRCINC_32 0x08000000 // Word +#define UDMA_CHCTL_SRCINC_NONE 0x0C000000 // No increment +#define UDMA_CHCTL_SRCSIZE_M 0x03000000 // Source Data Size +#define UDMA_CHCTL_SRCSIZE_8 0x00000000 // Byte +#define UDMA_CHCTL_SRCSIZE_16 0x01000000 // Half-word +#define UDMA_CHCTL_SRCSIZE_32 0x02000000 // Word +#define UDMA_CHCTL_DSTPROT0 0x00200000 // Destination Privilege Access +#define UDMA_CHCTL_SRCPROT0 0x00040000 // Source Privilege Access +#define UDMA_CHCTL_ARBSIZE_M 0x0003C000 // Arbitration Size +#define UDMA_CHCTL_ARBSIZE_1 0x00000000 // 1 Transfer +#define UDMA_CHCTL_ARBSIZE_2 0x00004000 // 2 Transfers +#define UDMA_CHCTL_ARBSIZE_4 0x00008000 // 4 Transfers +#define UDMA_CHCTL_ARBSIZE_8 0x0000C000 // 8 Transfers +#define UDMA_CHCTL_ARBSIZE_16 0x00010000 // 16 Transfers +#define UDMA_CHCTL_ARBSIZE_32 0x00014000 // 32 Transfers +#define UDMA_CHCTL_ARBSIZE_64 0x00018000 // 64 Transfers +#define UDMA_CHCTL_ARBSIZE_128 0x0001C000 // 128 Transfers +#define UDMA_CHCTL_ARBSIZE_256 0x00020000 // 256 Transfers +#define UDMA_CHCTL_ARBSIZE_512 0x00024000 // 512 Transfers +#define UDMA_CHCTL_ARBSIZE_1024 0x00028000 // 1024 Transfers +#define UDMA_CHCTL_XFERSIZE_M 0x00003FF0 // Transfer Size (minus 1) +#define UDMA_CHCTL_NXTUSEBURST 0x00000008 // Next Useburst +#define UDMA_CHCTL_XFERMODE_M 0x00000007 // uDMA Transfer Mode +#define UDMA_CHCTL_XFERMODE_STOP \ + 0x00000000 // Stop +#define UDMA_CHCTL_XFERMODE_BASIC \ + 0x00000001 // Basic +#define UDMA_CHCTL_XFERMODE_AUTO \ + 0x00000002 // Auto-Request +#define UDMA_CHCTL_XFERMODE_PINGPONG \ + 0x00000003 // Ping-Pong +#define UDMA_CHCTL_XFERMODE_MEM_SG \ + 0x00000004 // Memory Scatter-Gather +#define UDMA_CHCTL_XFERMODE_MEM_SGA \ + 0x00000005 // Alternate Memory Scatter-Gather +#define UDMA_CHCTL_XFERMODE_PER_SG \ + 0x00000006 // Peripheral Scatter-Gather +#define UDMA_CHCTL_XFERMODE_PER_SGA \ + 0x00000007 // Alternate Peripheral + // Scatter-Gather +#define UDMA_CHCTL_XFERSIZE_S 4 + +#endif // __HW_UDMA_H__ diff --git a/os/common/ext/TivaWare/inc/hw_usb.h b/os/common/ext/TivaWare/inc/hw_usb.h new file mode 100644 index 0000000..5d4027a --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_usb.h @@ -0,0 +1,3032 @@ +//***************************************************************************** +// +// hw_usb.h - Macros for use in accessing the USB registers. +// +// Copyright (c) 2007-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_USB_H__ +#define __HW_USB_H__ + +//***************************************************************************** +// +// The following are defines for the Univeral Serial Bus register offsets. +// +//***************************************************************************** +#define USB_O_FADDR 0x00000000 // USB Device Functional Address +#define USB_O_POWER 0x00000001 // USB Power +#define USB_O_TXIS 0x00000002 // USB Transmit Interrupt Status +#define USB_O_RXIS 0x00000004 // USB Receive Interrupt Status +#define USB_O_TXIE 0x00000006 // USB Transmit Interrupt Enable +#define USB_O_RXIE 0x00000008 // USB Receive Interrupt Enable +#define USB_O_IS 0x0000000A // USB General Interrupt Status +#define USB_O_IE 0x0000000B // USB Interrupt Enable +#define USB_O_FRAME 0x0000000C // USB Frame Value +#define USB_O_EPIDX 0x0000000E // USB Endpoint Index +#define USB_O_TEST 0x0000000F // USB Test Mode +#define USB_O_FIFO0 0x00000020 // USB FIFO Endpoint 0 +#define USB_O_FIFO1 0x00000024 // USB FIFO Endpoint 1 +#define USB_O_FIFO2 0x00000028 // USB FIFO Endpoint 2 +#define USB_O_FIFO3 0x0000002C // USB FIFO Endpoint 3 +#define USB_O_FIFO4 0x00000030 // USB FIFO Endpoint 4 +#define USB_O_FIFO5 0x00000034 // USB FIFO Endpoint 5 +#define USB_O_FIFO6 0x00000038 // USB FIFO Endpoint 6 +#define USB_O_FIFO7 0x0000003C // USB FIFO Endpoint 7 +#define USB_O_DEVCTL 0x00000060 // USB Device Control +#define USB_O_CCONF 0x00000061 // USB Common Configuration +#define USB_O_TXFIFOSZ 0x00000062 // USB Transmit Dynamic FIFO Sizing +#define USB_O_RXFIFOSZ 0x00000063 // USB Receive Dynamic FIFO Sizing +#define USB_O_TXFIFOADD 0x00000064 // USB Transmit FIFO Start Address +#define USB_O_RXFIFOADD 0x00000066 // USB Receive FIFO Start Address +#define USB_O_ULPIVBUSCTL 0x00000070 // USB ULPI VBUS Control +#define USB_O_ULPIREGDATA 0x00000074 // USB ULPI Register Data +#define USB_O_ULPIREGADDR 0x00000075 // USB ULPI Register Address +#define USB_O_ULPIREGCTL 0x00000076 // USB ULPI Register Control +#define USB_O_EPINFO 0x00000078 // USB Endpoint Information +#define USB_O_RAMINFO 0x00000079 // USB RAM Information +#define USB_O_CONTIM 0x0000007A // USB Connect Timing +#define USB_O_VPLEN 0x0000007B // USB OTG VBUS Pulse Timing +#define USB_O_HSEOF 0x0000007C // USB High-Speed Last Transaction + // to End of Frame Timing +#define USB_O_FSEOF 0x0000007D // USB Full-Speed Last Transaction + // to End of Frame Timing +#define USB_O_LSEOF 0x0000007E // USB Low-Speed Last Transaction + // to End of Frame Timing +#define USB_O_TXFUNCADDR0 0x00000080 // USB Transmit Functional Address + // Endpoint 0 +#define USB_O_TXHUBADDR0 0x00000082 // USB Transmit Hub Address + // Endpoint 0 +#define USB_O_TXHUBPORT0 0x00000083 // USB Transmit Hub Port Endpoint 0 +#define USB_O_TXFUNCADDR1 0x00000088 // USB Transmit Functional Address + // Endpoint 1 +#define USB_O_TXHUBADDR1 0x0000008A // USB Transmit Hub Address + // Endpoint 1 +#define USB_O_TXHUBPORT1 0x0000008B // USB Transmit Hub Port Endpoint 1 +#define USB_O_RXFUNCADDR1 0x0000008C // USB Receive Functional Address + // Endpoint 1 +#define USB_O_RXHUBADDR1 0x0000008E // USB Receive Hub Address Endpoint + // 1 +#define USB_O_RXHUBPORT1 0x0000008F // USB Receive Hub Port Endpoint 1 +#define USB_O_TXFUNCADDR2 0x00000090 // USB Transmit Functional Address + // Endpoint 2 +#define USB_O_TXHUBADDR2 0x00000092 // USB Transmit Hub Address + // Endpoint 2 +#define USB_O_TXHUBPORT2 0x00000093 // USB Transmit Hub Port Endpoint 2 +#define USB_O_RXFUNCADDR2 0x00000094 // USB Receive Functional Address + // Endpoint 2 +#define USB_O_RXHUBADDR2 0x00000096 // USB Receive Hub Address Endpoint + // 2 +#define USB_O_RXHUBPORT2 0x00000097 // USB Receive Hub Port Endpoint 2 +#define USB_O_TXFUNCADDR3 0x00000098 // USB Transmit Functional Address + // Endpoint 3 +#define USB_O_TXHUBADDR3 0x0000009A // USB Transmit Hub Address + // Endpoint 3 +#define USB_O_TXHUBPORT3 0x0000009B // USB Transmit Hub Port Endpoint 3 +#define USB_O_RXFUNCADDR3 0x0000009C // USB Receive Functional Address + // Endpoint 3 +#define USB_O_RXHUBADDR3 0x0000009E // USB Receive Hub Address Endpoint + // 3 +#define USB_O_RXHUBPORT3 0x0000009F // USB Receive Hub Port Endpoint 3 +#define USB_O_TXFUNCADDR4 0x000000A0 // USB Transmit Functional Address + // Endpoint 4 +#define USB_O_TXHUBADDR4 0x000000A2 // USB Transmit Hub Address + // Endpoint 4 +#define USB_O_TXHUBPORT4 0x000000A3 // USB Transmit Hub Port Endpoint 4 +#define USB_O_RXFUNCADDR4 0x000000A4 // USB Receive Functional Address + // Endpoint 4 +#define USB_O_RXHUBADDR4 0x000000A6 // USB Receive Hub Address Endpoint + // 4 +#define USB_O_RXHUBPORT4 0x000000A7 // USB Receive Hub Port Endpoint 4 +#define USB_O_TXFUNCADDR5 0x000000A8 // USB Transmit Functional Address + // Endpoint 5 +#define USB_O_TXHUBADDR5 0x000000AA // USB Transmit Hub Address + // Endpoint 5 +#define USB_O_TXHUBPORT5 0x000000AB // USB Transmit Hub Port Endpoint 5 +#define USB_O_RXFUNCADDR5 0x000000AC // USB Receive Functional Address + // Endpoint 5 +#define USB_O_RXHUBADDR5 0x000000AE // USB Receive Hub Address Endpoint + // 5 +#define USB_O_RXHUBPORT5 0x000000AF // USB Receive Hub Port Endpoint 5 +#define USB_O_TXFUNCADDR6 0x000000B0 // USB Transmit Functional Address + // Endpoint 6 +#define USB_O_TXHUBADDR6 0x000000B2 // USB Transmit Hub Address + // Endpoint 6 +#define USB_O_TXHUBPORT6 0x000000B3 // USB Transmit Hub Port Endpoint 6 +#define USB_O_RXFUNCADDR6 0x000000B4 // USB Receive Functional Address + // Endpoint 6 +#define USB_O_RXHUBADDR6 0x000000B6 // USB Receive Hub Address Endpoint + // 6 +#define USB_O_RXHUBPORT6 0x000000B7 // USB Receive Hub Port Endpoint 6 +#define USB_O_TXFUNCADDR7 0x000000B8 // USB Transmit Functional Address + // Endpoint 7 +#define USB_O_TXHUBADDR7 0x000000BA // USB Transmit Hub Address + // Endpoint 7 +#define USB_O_TXHUBPORT7 0x000000BB // USB Transmit Hub Port Endpoint 7 +#define USB_O_RXFUNCADDR7 0x000000BC // USB Receive Functional Address + // Endpoint 7 +#define USB_O_RXHUBADDR7 0x000000BE // USB Receive Hub Address Endpoint + // 7 +#define USB_O_RXHUBPORT7 0x000000BF // USB Receive Hub Port Endpoint 7 +#define USB_O_CSRL0 0x00000102 // USB Control and Status Endpoint + // 0 Low +#define USB_O_CSRH0 0x00000103 // USB Control and Status Endpoint + // 0 High +#define USB_O_COUNT0 0x00000108 // USB Receive Byte Count Endpoint + // 0 +#define USB_O_TYPE0 0x0000010A // USB Type Endpoint 0 +#define USB_O_NAKLMT 0x0000010B // USB NAK Limit +#define USB_O_TXMAXP1 0x00000110 // USB Maximum Transmit Data + // Endpoint 1 +#define USB_O_TXCSRL1 0x00000112 // USB Transmit Control and Status + // Endpoint 1 Low +#define USB_O_TXCSRH1 0x00000113 // USB Transmit Control and Status + // Endpoint 1 High +#define USB_O_RXMAXP1 0x00000114 // USB Maximum Receive Data + // Endpoint 1 +#define USB_O_RXCSRL1 0x00000116 // USB Receive Control and Status + // Endpoint 1 Low +#define USB_O_RXCSRH1 0x00000117 // USB Receive Control and Status + // Endpoint 1 High +#define USB_O_RXCOUNT1 0x00000118 // USB Receive Byte Count Endpoint + // 1 +#define USB_O_TXTYPE1 0x0000011A // USB Host Transmit Configure Type + // Endpoint 1 +#define USB_O_TXINTERVAL1 0x0000011B // USB Host Transmit Interval + // Endpoint 1 +#define USB_O_RXTYPE1 0x0000011C // USB Host Configure Receive Type + // Endpoint 1 +#define USB_O_RXINTERVAL1 0x0000011D // USB Host Receive Polling + // Interval Endpoint 1 +#define USB_O_TXMAXP2 0x00000120 // USB Maximum Transmit Data + // Endpoint 2 +#define USB_O_TXCSRL2 0x00000122 // USB Transmit Control and Status + // Endpoint 2 Low +#define USB_O_TXCSRH2 0x00000123 // USB Transmit Control and Status + // Endpoint 2 High +#define USB_O_RXMAXP2 0x00000124 // USB Maximum Receive Data + // Endpoint 2 +#define USB_O_RXCSRL2 0x00000126 // USB Receive Control and Status + // Endpoint 2 Low +#define USB_O_RXCSRH2 0x00000127 // USB Receive Control and Status + // Endpoint 2 High +#define USB_O_RXCOUNT2 0x00000128 // USB Receive Byte Count Endpoint + // 2 +#define USB_O_TXTYPE2 0x0000012A // USB Host Transmit Configure Type + // Endpoint 2 +#define USB_O_TXINTERVAL2 0x0000012B // USB Host Transmit Interval + // Endpoint 2 +#define USB_O_RXTYPE2 0x0000012C // USB Host Configure Receive Type + // Endpoint 2 +#define USB_O_RXINTERVAL2 0x0000012D // USB Host Receive Polling + // Interval Endpoint 2 +#define USB_O_TXMAXP3 0x00000130 // USB Maximum Transmit Data + // Endpoint 3 +#define USB_O_TXCSRL3 0x00000132 // USB Transmit Control and Status + // Endpoint 3 Low +#define USB_O_TXCSRH3 0x00000133 // USB Transmit Control and Status + // Endpoint 3 High +#define USB_O_RXMAXP3 0x00000134 // USB Maximum Receive Data + // Endpoint 3 +#define USB_O_RXCSRL3 0x00000136 // USB Receive Control and Status + // Endpoint 3 Low +#define USB_O_RXCSRH3 0x00000137 // USB Receive Control and Status + // Endpoint 3 High +#define USB_O_RXCOUNT3 0x00000138 // USB Receive Byte Count Endpoint + // 3 +#define USB_O_TXTYPE3 0x0000013A // USB Host Transmit Configure Type + // Endpoint 3 +#define USB_O_TXINTERVAL3 0x0000013B // USB Host Transmit Interval + // Endpoint 3 +#define USB_O_RXTYPE3 0x0000013C // USB Host Configure Receive Type + // Endpoint 3 +#define USB_O_RXINTERVAL3 0x0000013D // USB Host Receive Polling + // Interval Endpoint 3 +#define USB_O_TXMAXP4 0x00000140 // USB Maximum Transmit Data + // Endpoint 4 +#define USB_O_TXCSRL4 0x00000142 // USB Transmit Control and Status + // Endpoint 4 Low +#define USB_O_TXCSRH4 0x00000143 // USB Transmit Control and Status + // Endpoint 4 High +#define USB_O_RXMAXP4 0x00000144 // USB Maximum Receive Data + // Endpoint 4 +#define USB_O_RXCSRL4 0x00000146 // USB Receive Control and Status + // Endpoint 4 Low +#define USB_O_RXCSRH4 0x00000147 // USB Receive Control and Status + // Endpoint 4 High +#define USB_O_RXCOUNT4 0x00000148 // USB Receive Byte Count Endpoint + // 4 +#define USB_O_TXTYPE4 0x0000014A // USB Host Transmit Configure Type + // Endpoint 4 +#define USB_O_TXINTERVAL4 0x0000014B // USB Host Transmit Interval + // Endpoint 4 +#define USB_O_RXTYPE4 0x0000014C // USB Host Configure Receive Type + // Endpoint 4 +#define USB_O_RXINTERVAL4 0x0000014D // USB Host Receive Polling + // Interval Endpoint 4 +#define USB_O_TXMAXP5 0x00000150 // USB Maximum Transmit Data + // Endpoint 5 +#define USB_O_TXCSRL5 0x00000152 // USB Transmit Control and Status + // Endpoint 5 Low +#define USB_O_TXCSRH5 0x00000153 // USB Transmit Control and Status + // Endpoint 5 High +#define USB_O_RXMAXP5 0x00000154 // USB Maximum Receive Data + // Endpoint 5 +#define USB_O_RXCSRL5 0x00000156 // USB Receive Control and Status + // Endpoint 5 Low +#define USB_O_RXCSRH5 0x00000157 // USB Receive Control and Status + // Endpoint 5 High +#define USB_O_RXCOUNT5 0x00000158 // USB Receive Byte Count Endpoint + // 5 +#define USB_O_TXTYPE5 0x0000015A // USB Host Transmit Configure Type + // Endpoint 5 +#define USB_O_TXINTERVAL5 0x0000015B // USB Host Transmit Interval + // Endpoint 5 +#define USB_O_RXTYPE5 0x0000015C // USB Host Configure Receive Type + // Endpoint 5 +#define USB_O_RXINTERVAL5 0x0000015D // USB Host Receive Polling + // Interval Endpoint 5 +#define USB_O_TXMAXP6 0x00000160 // USB Maximum Transmit Data + // Endpoint 6 +#define USB_O_TXCSRL6 0x00000162 // USB Transmit Control and Status + // Endpoint 6 Low +#define USB_O_TXCSRH6 0x00000163 // USB Transmit Control and Status + // Endpoint 6 High +#define USB_O_RXMAXP6 0x00000164 // USB Maximum Receive Data + // Endpoint 6 +#define USB_O_RXCSRL6 0x00000166 // USB Receive Control and Status + // Endpoint 6 Low +#define USB_O_RXCSRH6 0x00000167 // USB Receive Control and Status + // Endpoint 6 High +#define USB_O_RXCOUNT6 0x00000168 // USB Receive Byte Count Endpoint + // 6 +#define USB_O_TXTYPE6 0x0000016A // USB Host Transmit Configure Type + // Endpoint 6 +#define USB_O_TXINTERVAL6 0x0000016B // USB Host Transmit Interval + // Endpoint 6 +#define USB_O_RXTYPE6 0x0000016C // USB Host Configure Receive Type + // Endpoint 6 +#define USB_O_RXINTERVAL6 0x0000016D // USB Host Receive Polling + // Interval Endpoint 6 +#define USB_O_TXMAXP7 0x00000170 // USB Maximum Transmit Data + // Endpoint 7 +#define USB_O_TXCSRL7 0x00000172 // USB Transmit Control and Status + // Endpoint 7 Low +#define USB_O_TXCSRH7 0x00000173 // USB Transmit Control and Status + // Endpoint 7 High +#define USB_O_RXMAXP7 0x00000174 // USB Maximum Receive Data + // Endpoint 7 +#define USB_O_RXCSRL7 0x00000176 // USB Receive Control and Status + // Endpoint 7 Low +#define USB_O_RXCSRH7 0x00000177 // USB Receive Control and Status + // Endpoint 7 High +#define USB_O_RXCOUNT7 0x00000178 // USB Receive Byte Count Endpoint + // 7 +#define USB_O_TXTYPE7 0x0000017A // USB Host Transmit Configure Type + // Endpoint 7 +#define USB_O_TXINTERVAL7 0x0000017B // USB Host Transmit Interval + // Endpoint 7 +#define USB_O_RXTYPE7 0x0000017C // USB Host Configure Receive Type + // Endpoint 7 +#define USB_O_RXINTERVAL7 0x0000017D // USB Host Receive Polling + // Interval Endpoint 7 +#define USB_O_DMAINTR 0x00000200 // USB DMA Interrupt +#define USB_O_DMACTL0 0x00000204 // USB DMA Control 0 +#define USB_O_DMAADDR0 0x00000208 // USB DMA Address 0 +#define USB_O_DMACOUNT0 0x0000020C // USB DMA Count 0 +#define USB_O_DMACTL1 0x00000214 // USB DMA Control 1 +#define USB_O_DMAADDR1 0x00000218 // USB DMA Address 1 +#define USB_O_DMACOUNT1 0x0000021C // USB DMA Count 1 +#define USB_O_DMACTL2 0x00000224 // USB DMA Control 2 +#define USB_O_DMAADDR2 0x00000228 // USB DMA Address 2 +#define USB_O_DMACOUNT2 0x0000022C // USB DMA Count 2 +#define USB_O_DMACTL3 0x00000234 // USB DMA Control 3 +#define USB_O_DMAADDR3 0x00000238 // USB DMA Address 3 +#define USB_O_DMACOUNT3 0x0000023C // USB DMA Count 3 +#define USB_O_DMACTL4 0x00000244 // USB DMA Control 4 +#define USB_O_DMAADDR4 0x00000248 // USB DMA Address 4 +#define USB_O_DMACOUNT4 0x0000024C // USB DMA Count 4 +#define USB_O_DMACTL5 0x00000254 // USB DMA Control 5 +#define USB_O_DMAADDR5 0x00000258 // USB DMA Address 5 +#define USB_O_DMACOUNT5 0x0000025C // USB DMA Count 5 +#define USB_O_DMACTL6 0x00000264 // USB DMA Control 6 +#define USB_O_DMAADDR6 0x00000268 // USB DMA Address 6 +#define USB_O_DMACOUNT6 0x0000026C // USB DMA Count 6 +#define USB_O_DMACTL7 0x00000274 // USB DMA Control 7 +#define USB_O_DMAADDR7 0x00000278 // USB DMA Address 7 +#define USB_O_DMACOUNT7 0x0000027C // USB DMA Count 7 +#define USB_O_RQPKTCOUNT1 0x00000304 // USB Request Packet Count in + // Block Transfer Endpoint 1 +#define USB_O_RQPKTCOUNT2 0x00000308 // USB Request Packet Count in + // Block Transfer Endpoint 2 +#define USB_O_RQPKTCOUNT3 0x0000030C // USB Request Packet Count in + // Block Transfer Endpoint 3 +#define USB_O_RQPKTCOUNT4 0x00000310 // USB Request Packet Count in + // Block Transfer Endpoint 4 +#define USB_O_RQPKTCOUNT5 0x00000314 // USB Request Packet Count in + // Block Transfer Endpoint 5 +#define USB_O_RQPKTCOUNT6 0x00000318 // USB Request Packet Count in + // Block Transfer Endpoint 6 +#define USB_O_RQPKTCOUNT7 0x0000031C // USB Request Packet Count in + // Block Transfer Endpoint 7 +#define USB_O_RXDPKTBUFDIS 0x00000340 // USB Receive Double Packet Buffer + // Disable +#define USB_O_TXDPKTBUFDIS 0x00000342 // USB Transmit Double Packet + // Buffer Disable +#define USB_O_CTO 0x00000344 // USB Chirp Timeout +#define USB_O_HHSRTN 0x00000346 // USB High Speed to UTM Operating + // Delay +#define USB_O_HSBT 0x00000348 // USB High Speed Time-out Adder +#define USB_O_LPMATTR 0x00000360 // USB LPM Attributes +#define USB_O_LPMCNTRL 0x00000362 // USB LPM Control +#define USB_O_LPMIM 0x00000363 // USB LPM Interrupt Mask +#define USB_O_LPMRIS 0x00000364 // USB LPM Raw Interrupt Status +#define USB_O_LPMFADDR 0x00000365 // USB LPM Function Address +#define USB_O_EPC 0x00000400 // USB External Power Control +#define USB_O_EPCRIS 0x00000404 // USB External Power Control Raw + // Interrupt Status +#define USB_O_EPCIM 0x00000408 // USB External Power Control + // Interrupt Mask +#define USB_O_EPCISC 0x0000040C // USB External Power Control + // Interrupt Status and Clear +#define USB_O_DRRIS 0x00000410 // USB Device RESUME Raw Interrupt + // Status +#define USB_O_DRIM 0x00000414 // USB Device RESUME Interrupt Mask +#define USB_O_DRISC 0x00000418 // USB Device RESUME Interrupt + // Status and Clear +#define USB_O_GPCS 0x0000041C // USB General-Purpose Control and + // Status +#define USB_O_VDC 0x00000430 // USB VBUS Droop Control +#define USB_O_VDCRIS 0x00000434 // USB VBUS Droop Control Raw + // Interrupt Status +#define USB_O_VDCIM 0x00000438 // USB VBUS Droop Control Interrupt + // Mask +#define USB_O_VDCISC 0x0000043C // USB VBUS Droop Control Interrupt + // Status and Clear +#define USB_O_IDVRIS 0x00000444 // USB ID Valid Detect Raw + // Interrupt Status +#define USB_O_IDVIM 0x00000448 // USB ID Valid Detect Interrupt + // Mask +#define USB_O_IDVISC 0x0000044C // USB ID Valid Detect Interrupt + // Status and Clear +#define USB_O_DMASEL 0x00000450 // USB DMA Select +#define USB_O_PP 0x00000FC0 // USB Peripheral Properties +#define USB_O_PC 0x00000FC4 // USB Peripheral Configuration +#define USB_O_CC 0x00000FC8 // USB Clock Configuration + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FADDR register. +// +//***************************************************************************** +#define USB_FADDR_M 0x0000007F // Function Address +#define USB_FADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_POWER register. +// +//***************************************************************************** +#define USB_POWER_ISOUP 0x00000080 // Isochronous Update +#define USB_POWER_SOFTCONN 0x00000040 // Soft Connect/Disconnect +#define USB_POWER_HSENAB 0x00000020 // High Speed Enable +#define USB_POWER_HSMODE 0x00000010 // High Speed Enable +#define USB_POWER_RESET 0x00000008 // RESET Signaling +#define USB_POWER_RESUME 0x00000004 // RESUME Signaling +#define USB_POWER_SUSPEND 0x00000002 // SUSPEND Mode +#define USB_POWER_PWRDNPHY 0x00000001 // Power Down PHY + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXIS register. +// +//***************************************************************************** +#define USB_TXIS_EP7 0x00000080 // TX Endpoint 7 Interrupt +#define USB_TXIS_EP6 0x00000040 // TX Endpoint 6 Interrupt +#define USB_TXIS_EP5 0x00000020 // TX Endpoint 5 Interrupt +#define USB_TXIS_EP4 0x00000010 // TX Endpoint 4 Interrupt +#define USB_TXIS_EP3 0x00000008 // TX Endpoint 3 Interrupt +#define USB_TXIS_EP2 0x00000004 // TX Endpoint 2 Interrupt +#define USB_TXIS_EP1 0x00000002 // TX Endpoint 1 Interrupt +#define USB_TXIS_EP0 0x00000001 // TX and RX Endpoint 0 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXIS register. +// +//***************************************************************************** +#define USB_RXIS_EP7 0x00000080 // RX Endpoint 7 Interrupt +#define USB_RXIS_EP6 0x00000040 // RX Endpoint 6 Interrupt +#define USB_RXIS_EP5 0x00000020 // RX Endpoint 5 Interrupt +#define USB_RXIS_EP4 0x00000010 // RX Endpoint 4 Interrupt +#define USB_RXIS_EP3 0x00000008 // RX Endpoint 3 Interrupt +#define USB_RXIS_EP2 0x00000004 // RX Endpoint 2 Interrupt +#define USB_RXIS_EP1 0x00000002 // RX Endpoint 1 Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXIE register. +// +//***************************************************************************** +#define USB_TXIE_EP7 0x00000080 // TX Endpoint 7 Interrupt Enable +#define USB_TXIE_EP6 0x00000040 // TX Endpoint 6 Interrupt Enable +#define USB_TXIE_EP5 0x00000020 // TX Endpoint 5 Interrupt Enable +#define USB_TXIE_EP4 0x00000010 // TX Endpoint 4 Interrupt Enable +#define USB_TXIE_EP3 0x00000008 // TX Endpoint 3 Interrupt Enable +#define USB_TXIE_EP2 0x00000004 // TX Endpoint 2 Interrupt Enable +#define USB_TXIE_EP1 0x00000002 // TX Endpoint 1 Interrupt Enable +#define USB_TXIE_EP0 0x00000001 // TX and RX Endpoint 0 Interrupt + // Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXIE register. +// +//***************************************************************************** +#define USB_RXIE_EP7 0x00000080 // RX Endpoint 7 Interrupt Enable +#define USB_RXIE_EP6 0x00000040 // RX Endpoint 6 Interrupt Enable +#define USB_RXIE_EP5 0x00000020 // RX Endpoint 5 Interrupt Enable +#define USB_RXIE_EP4 0x00000010 // RX Endpoint 4 Interrupt Enable +#define USB_RXIE_EP3 0x00000008 // RX Endpoint 3 Interrupt Enable +#define USB_RXIE_EP2 0x00000004 // RX Endpoint 2 Interrupt Enable +#define USB_RXIE_EP1 0x00000002 // RX Endpoint 1 Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IS register. +// +//***************************************************************************** +#define USB_IS_VBUSERR 0x00000080 // VBUS Error (OTG only) +#define USB_IS_SESREQ 0x00000040 // SESSION REQUEST (OTG only) +#define USB_IS_DISCON 0x00000020 // Session Disconnect (OTG only) +#define USB_IS_CONN 0x00000010 // Session Connect +#define USB_IS_SOF 0x00000008 // Start of Frame +#define USB_IS_BABBLE 0x00000004 // Babble Detected +#define USB_IS_RESET 0x00000004 // RESET Signaling Detected +#define USB_IS_RESUME 0x00000002 // RESUME Signaling Detected +#define USB_IS_SUSPEND 0x00000001 // SUSPEND Signaling Detected + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IE register. +// +//***************************************************************************** +#define USB_IE_VBUSERR 0x00000080 // Enable VBUS Error Interrupt (OTG + // only) +#define USB_IE_SESREQ 0x00000040 // Enable Session Request (OTG + // only) +#define USB_IE_DISCON 0x00000020 // Enable Disconnect Interrupt +#define USB_IE_CONN 0x00000010 // Enable Connect Interrupt +#define USB_IE_SOF 0x00000008 // Enable Start-of-Frame Interrupt +#define USB_IE_BABBLE 0x00000004 // Enable Babble Interrupt +#define USB_IE_RESET 0x00000004 // Enable RESET Interrupt +#define USB_IE_RESUME 0x00000002 // Enable RESUME Interrupt +#define USB_IE_SUSPND 0x00000001 // Enable SUSPEND Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FRAME register. +// +//***************************************************************************** +#define USB_FRAME_M 0x000007FF // Frame Number +#define USB_FRAME_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPIDX register. +// +//***************************************************************************** +#define USB_EPIDX_EPIDX_M 0x0000000F // Endpoint Index +#define USB_EPIDX_EPIDX_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TEST register. +// +//***************************************************************************** +#define USB_TEST_FORCEH 0x00000080 // Force Host Mode +#define USB_TEST_FIFOACC 0x00000040 // FIFO Access +#define USB_TEST_FORCEFS 0x00000020 // Force Full-Speed Mode +#define USB_TEST_FORCEHS 0x00000010 // Force High-Speed Mode +#define USB_TEST_TESTPKT 0x00000008 // Test Packet Mode Enable +#define USB_TEST_TESTK 0x00000004 // Test_K Mode Enable +#define USB_TEST_TESTJ 0x00000002 // Test_J Mode Enable +#define USB_TEST_TESTSE0NAK 0x00000001 // Test_SE0_NAK Test Mode Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO0 register. +// +//***************************************************************************** +#define USB_FIFO0_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO0_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO1 register. +// +//***************************************************************************** +#define USB_FIFO1_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO1_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO2 register. +// +//***************************************************************************** +#define USB_FIFO2_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO2_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO3 register. +// +//***************************************************************************** +#define USB_FIFO3_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO3_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO4 register. +// +//***************************************************************************** +#define USB_FIFO4_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO4_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO5 register. +// +//***************************************************************************** +#define USB_FIFO5_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO5_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO6 register. +// +//***************************************************************************** +#define USB_FIFO6_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO6_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FIFO7 register. +// +//***************************************************************************** +#define USB_FIFO7_EPDATA_M 0xFFFFFFFF // Endpoint Data +#define USB_FIFO7_EPDATA_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DEVCTL register. +// +//***************************************************************************** +#define USB_DEVCTL_DEV 0x00000080 // Device Mode (OTG only) +#define USB_DEVCTL_FSDEV 0x00000040 // Full-Speed Device Detected +#define USB_DEVCTL_LSDEV 0x00000020 // Low-Speed Device Detected +#define USB_DEVCTL_VBUS_M 0x00000018 // VBUS Level (OTG only) +#define USB_DEVCTL_VBUS_NONE 0x00000000 // Below SessionEnd +#define USB_DEVCTL_VBUS_SEND 0x00000008 // Above SessionEnd, below AValid +#define USB_DEVCTL_VBUS_AVALID 0x00000010 // Above AValid, below VBUSValid +#define USB_DEVCTL_VBUS_VALID 0x00000018 // Above VBUSValid +#define USB_DEVCTL_HOST 0x00000004 // Host Mode +#define USB_DEVCTL_HOSTREQ 0x00000002 // Host Request (OTG only) +#define USB_DEVCTL_SESSION 0x00000001 // Session Start/End (OTG only) + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CCONF register. +// +//***************************************************************************** +#define USB_CCONF_TXEDMA 0x00000002 // TX Early DMA Enable +#define USB_CCONF_RXEDMA 0x00000001 // TX Early DMA Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFIFOSZ register. +// +//***************************************************************************** +#define USB_TXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support +#define USB_TXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size +#define USB_TXFIFOSZ_SIZE_8 0x00000000 // 8 +#define USB_TXFIFOSZ_SIZE_16 0x00000001 // 16 +#define USB_TXFIFOSZ_SIZE_32 0x00000002 // 32 +#define USB_TXFIFOSZ_SIZE_64 0x00000003 // 64 +#define USB_TXFIFOSZ_SIZE_128 0x00000004 // 128 +#define USB_TXFIFOSZ_SIZE_256 0x00000005 // 256 +#define USB_TXFIFOSZ_SIZE_512 0x00000006 // 512 +#define USB_TXFIFOSZ_SIZE_1024 0x00000007 // 1024 +#define USB_TXFIFOSZ_SIZE_2048 0x00000008 // 2048 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFIFOSZ register. +// +//***************************************************************************** +#define USB_RXFIFOSZ_DPB 0x00000010 // Double Packet Buffer Support +#define USB_RXFIFOSZ_SIZE_M 0x0000000F // Max Packet Size +#define USB_RXFIFOSZ_SIZE_8 0x00000000 // 8 +#define USB_RXFIFOSZ_SIZE_16 0x00000001 // 16 +#define USB_RXFIFOSZ_SIZE_32 0x00000002 // 32 +#define USB_RXFIFOSZ_SIZE_64 0x00000003 // 64 +#define USB_RXFIFOSZ_SIZE_128 0x00000004 // 128 +#define USB_RXFIFOSZ_SIZE_256 0x00000005 // 256 +#define USB_RXFIFOSZ_SIZE_512 0x00000006 // 512 +#define USB_RXFIFOSZ_SIZE_1024 0x00000007 // 1024 +#define USB_RXFIFOSZ_SIZE_2048 0x00000008 // 2048 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFIFOADD +// register. +// +//***************************************************************************** +#define USB_TXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address +#define USB_TXFIFOADD_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFIFOADD +// register. +// +//***************************************************************************** +#define USB_RXFIFOADD_ADDR_M 0x000001FF // Transmit/Receive Start Address +#define USB_RXFIFOADD_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_ULPIVBUSCTL +// register. +// +//***************************************************************************** +#define USB_ULPIVBUSCTL_USEEXTVBUSIND \ + 0x00000002 // Use External VBUS Indicator +#define USB_ULPIVBUSCTL_USEEXTVBUS \ + 0x00000001 // Use External VBUS + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_ULPIREGDATA +// register. +// +//***************************************************************************** +#define USB_ULPIREGDATA_REGDATA_M \ + 0x000000FF // Register Data +#define USB_ULPIREGDATA_REGDATA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_ULPIREGADDR +// register. +// +//***************************************************************************** +#define USB_ULPIREGADDR_ADDR_M 0x000000FF // Register Address +#define USB_ULPIREGADDR_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_ULPIREGCTL +// register. +// +//***************************************************************************** +#define USB_ULPIREGCTL_RDWR 0x00000004 // Read/Write Control +#define USB_ULPIREGCTL_REGCMPLT 0x00000002 // Register Access Complete +#define USB_ULPIREGCTL_REGACC 0x00000001 // Initiate Register Access + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPINFO register. +// +//***************************************************************************** +#define USB_EPINFO_RXEP_M 0x000000F0 // RX Endpoints +#define USB_EPINFO_TXEP_M 0x0000000F // TX Endpoints +#define USB_EPINFO_RXEP_S 4 +#define USB_EPINFO_TXEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RAMINFO register. +// +//***************************************************************************** +#define USB_RAMINFO_DMACHAN_M 0x000000F0 // DMA Channels +#define USB_RAMINFO_RAMBITS_M 0x0000000F // RAM Address Bus Width +#define USB_RAMINFO_DMACHAN_S 4 +#define USB_RAMINFO_RAMBITS_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CONTIM register. +// +//***************************************************************************** +#define USB_CONTIM_WTCON_M 0x000000F0 // Connect Wait +#define USB_CONTIM_WTID_M 0x0000000F // Wait ID +#define USB_CONTIM_WTCON_S 4 +#define USB_CONTIM_WTID_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VPLEN register. +// +//***************************************************************************** +#define USB_VPLEN_VPLEN_M 0x000000FF // VBUS Pulse Length +#define USB_VPLEN_VPLEN_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_HSEOF register. +// +//***************************************************************************** +#define USB_HSEOF_HSEOFG_M 0x000000FF // HIgh-Speed End-of-Frame Gap +#define USB_HSEOF_HSEOFG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_FSEOF register. +// +//***************************************************************************** +#define USB_FSEOF_FSEOFG_M 0x000000FF // Full-Speed End-of-Frame Gap +#define USB_FSEOF_FSEOFG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LSEOF register. +// +//***************************************************************************** +#define USB_LSEOF_LSEOFG_M 0x000000FF // Low-Speed End-of-Frame Gap +#define USB_LSEOF_LSEOFG_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR0 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR0_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR0_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR0 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR0_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR0_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT0 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT0_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT0_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR1 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR1_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR1 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR1_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT1 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT1_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT1_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR1 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR1_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR1 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR1_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR1_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT1 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT1_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT1_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR2 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR2_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR2 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR2_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT2 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT2_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT2_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR2 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR2_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR2 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR2_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR2_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT2 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT2_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT2_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR3 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR3_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR3 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR3_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT3 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT3_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT3_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR3 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR3_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR3 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR3_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR3_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT3 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT3_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT3_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR4 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR4_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR4 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR4_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT4 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT4_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT4_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR4 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR4_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR4 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR4_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR4_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT4 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT4_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT4_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR5 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR5_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR5 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR5_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT5 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT5_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT5_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR5 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR5_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR5 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR5_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR5_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT5 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT5_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT5_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR6 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR6_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR6 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR6_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT6 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT6_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT6_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR6 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR6_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR6 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR6_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR6_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT6 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT6_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT6_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXFUNCADDR7 +// register. +// +//***************************************************************************** +#define USB_TXFUNCADDR7_ADDR_M 0x0000007F // Device Address +#define USB_TXFUNCADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBADDR7 +// register. +// +//***************************************************************************** +#define USB_TXHUBADDR7_ADDR_M 0x0000007F // Hub Address +#define USB_TXHUBADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXHUBPORT7 +// register. +// +//***************************************************************************** +#define USB_TXHUBPORT7_PORT_M 0x0000007F // Hub Port +#define USB_TXHUBPORT7_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXFUNCADDR7 +// register. +// +//***************************************************************************** +#define USB_RXFUNCADDR7_ADDR_M 0x0000007F // Device Address +#define USB_RXFUNCADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBADDR7 +// register. +// +//***************************************************************************** +#define USB_RXHUBADDR7_ADDR_M 0x0000007F // Hub Address +#define USB_RXHUBADDR7_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXHUBPORT7 +// register. +// +//***************************************************************************** +#define USB_RXHUBPORT7_PORT_M 0x0000007F // Hub Port +#define USB_RXHUBPORT7_PORT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CSRL0 register. +// +//***************************************************************************** +#define USB_CSRL0_NAKTO 0x00000080 // NAK Timeout +#define USB_CSRL0_SETENDC 0x00000080 // Setup End Clear +#define USB_CSRL0_STATUS 0x00000040 // STATUS Packet +#define USB_CSRL0_RXRDYC 0x00000040 // RXRDY Clear +#define USB_CSRL0_REQPKT 0x00000020 // Request Packet +#define USB_CSRL0_STALL 0x00000020 // Send Stall +#define USB_CSRL0_SETEND 0x00000010 // Setup End +#define USB_CSRL0_ERROR 0x00000010 // Error +#define USB_CSRL0_DATAEND 0x00000008 // Data End +#define USB_CSRL0_SETUP 0x00000008 // Setup Packet +#define USB_CSRL0_STALLED 0x00000004 // Endpoint Stalled +#define USB_CSRL0_TXRDY 0x00000002 // Transmit Packet Ready +#define USB_CSRL0_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CSRH0 register. +// +//***************************************************************************** +#define USB_CSRH0_DISPING 0x00000008 // PING Disable +#define USB_CSRH0_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_CSRH0_DT 0x00000002 // Data Toggle +#define USB_CSRH0_FLUSH 0x00000001 // Flush FIFO + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_COUNT0 register. +// +//***************************************************************************** +#define USB_COUNT0_COUNT_M 0x0000007F // FIFO Count +#define USB_COUNT0_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TYPE0 register. +// +//***************************************************************************** +#define USB_TYPE0_SPEED_M 0x000000C0 // Operating Speed +#define USB_TYPE0_SPEED_HIGH 0x00000040 // High +#define USB_TYPE0_SPEED_FULL 0x00000080 // Full +#define USB_TYPE0_SPEED_LOW 0x000000C0 // Low + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_NAKLMT register. +// +//***************************************************************************** +#define USB_NAKLMT_NAKLMT_M 0x0000001F // EP0 NAK Limit +#define USB_NAKLMT_NAKLMT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP1 register. +// +//***************************************************************************** +#define USB_TXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP1_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL1 register. +// +//***************************************************************************** +#define USB_TXCSRL1_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL1_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL1_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL1_STALL 0x00000010 // Send STALL +#define USB_TXCSRL1_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL1_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL1_ERROR 0x00000004 // Error +#define USB_TXCSRL1_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL1_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL1_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH1 register. +// +//***************************************************************************** +#define USB_TXCSRH1_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH1_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH1_MODE 0x00000020 // Mode +#define USB_TXCSRH1_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH1_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH1_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH1_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH1_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP1 register. +// +//***************************************************************************** +#define USB_RXMAXP1_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP1_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL1 register. +// +//***************************************************************************** +#define USB_RXCSRL1_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL1_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL1_STALL 0x00000020 // Send STALL +#define USB_RXCSRL1_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL1_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL1_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL1_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL1_OVER 0x00000004 // Overrun +#define USB_RXCSRL1_ERROR 0x00000004 // Error +#define USB_RXCSRL1_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL1_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH1 register. +// +//***************************************************************************** +#define USB_RXCSRH1_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH1_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH1_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH1_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH1_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH1_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH1_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH1_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH1_DT 0x00000002 // Data Toggle +#define USB_RXCSRH1_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT1 register. +// +//***************************************************************************** +#define USB_RXCOUNT1_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT1_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE1 register. +// +//***************************************************************************** +#define USB_TXTYPE1_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE1_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE1_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE1_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE1_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE1_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE1_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE1_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE1_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE1_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE1_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE1_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL1 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL1_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL1_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL1_TXPOLL_S \ + 0 +#define USB_TXINTERVAL1_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE1 register. +// +//***************************************************************************** +#define USB_RXTYPE1_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE1_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE1_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE1_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE1_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE1_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE1_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE1_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE1_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE1_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE1_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE1_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL1 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL1_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL1_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL1_TXPOLL_S \ + 0 +#define USB_RXINTERVAL1_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP2 register. +// +//***************************************************************************** +#define USB_TXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP2_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL2 register. +// +//***************************************************************************** +#define USB_TXCSRL2_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL2_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL2_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL2_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL2_STALL 0x00000010 // Send STALL +#define USB_TXCSRL2_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL2_ERROR 0x00000004 // Error +#define USB_TXCSRL2_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL2_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL2_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH2 register. +// +//***************************************************************************** +#define USB_TXCSRH2_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH2_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH2_MODE 0x00000020 // Mode +#define USB_TXCSRH2_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH2_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH2_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH2_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH2_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP2 register. +// +//***************************************************************************** +#define USB_RXMAXP2_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP2_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL2 register. +// +//***************************************************************************** +#define USB_RXCSRL2_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL2_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL2_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL2_STALL 0x00000020 // Send STALL +#define USB_RXCSRL2_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL2_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL2_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL2_ERROR 0x00000004 // Error +#define USB_RXCSRL2_OVER 0x00000004 // Overrun +#define USB_RXCSRL2_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL2_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH2 register. +// +//***************************************************************************** +#define USB_RXCSRH2_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH2_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH2_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH2_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH2_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH2_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH2_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH2_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH2_DT 0x00000002 // Data Toggle +#define USB_RXCSRH2_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT2 register. +// +//***************************************************************************** +#define USB_RXCOUNT2_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT2_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE2 register. +// +//***************************************************************************** +#define USB_TXTYPE2_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE2_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE2_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE2_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE2_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE2_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE2_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE2_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE2_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE2_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE2_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE2_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL2 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL2_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL2_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL2_NAKLMT_S \ + 0 +#define USB_TXINTERVAL2_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE2 register. +// +//***************************************************************************** +#define USB_RXTYPE2_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE2_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE2_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE2_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE2_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE2_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE2_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE2_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE2_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE2_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE2_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE2_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL2 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL2_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL2_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL2_TXPOLL_S \ + 0 +#define USB_RXINTERVAL2_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP3 register. +// +//***************************************************************************** +#define USB_TXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP3_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL3 register. +// +//***************************************************************************** +#define USB_TXCSRL3_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL3_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL3_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL3_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL3_STALL 0x00000010 // Send STALL +#define USB_TXCSRL3_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL3_ERROR 0x00000004 // Error +#define USB_TXCSRL3_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL3_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL3_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH3 register. +// +//***************************************************************************** +#define USB_TXCSRH3_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH3_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH3_MODE 0x00000020 // Mode +#define USB_TXCSRH3_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH3_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH3_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH3_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH3_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP3 register. +// +//***************************************************************************** +#define USB_RXMAXP3_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP3_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL3 register. +// +//***************************************************************************** +#define USB_RXCSRL3_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL3_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL3_STALL 0x00000020 // Send STALL +#define USB_RXCSRL3_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL3_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL3_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL3_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL3_ERROR 0x00000004 // Error +#define USB_RXCSRL3_OVER 0x00000004 // Overrun +#define USB_RXCSRL3_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL3_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH3 register. +// +//***************************************************************************** +#define USB_RXCSRH3_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH3_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH3_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH3_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH3_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH3_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH3_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH3_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH3_DT 0x00000002 // Data Toggle +#define USB_RXCSRH3_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT3 register. +// +//***************************************************************************** +#define USB_RXCOUNT3_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT3_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE3 register. +// +//***************************************************************************** +#define USB_TXTYPE3_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE3_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE3_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE3_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE3_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE3_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE3_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE3_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE3_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE3_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE3_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE3_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL3 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL3_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL3_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL3_TXPOLL_S \ + 0 +#define USB_TXINTERVAL3_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE3 register. +// +//***************************************************************************** +#define USB_RXTYPE3_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE3_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE3_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE3_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE3_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE3_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE3_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE3_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE3_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE3_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE3_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE3_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL3 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL3_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL3_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL3_TXPOLL_S \ + 0 +#define USB_RXINTERVAL3_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP4 register. +// +//***************************************************************************** +#define USB_TXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP4_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL4 register. +// +//***************************************************************************** +#define USB_TXCSRL4_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL4_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL4_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL4_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL4_STALL 0x00000010 // Send STALL +#define USB_TXCSRL4_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL4_ERROR 0x00000004 // Error +#define USB_TXCSRL4_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL4_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL4_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH4 register. +// +//***************************************************************************** +#define USB_TXCSRH4_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH4_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH4_MODE 0x00000020 // Mode +#define USB_TXCSRH4_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH4_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH4_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH4_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH4_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP4 register. +// +//***************************************************************************** +#define USB_RXMAXP4_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP4_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL4 register. +// +//***************************************************************************** +#define USB_RXCSRL4_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL4_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL4_STALL 0x00000020 // Send STALL +#define USB_RXCSRL4_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL4_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL4_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL4_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL4_OVER 0x00000004 // Overrun +#define USB_RXCSRL4_ERROR 0x00000004 // Error +#define USB_RXCSRL4_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL4_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH4 register. +// +//***************************************************************************** +#define USB_RXCSRH4_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH4_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH4_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH4_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH4_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH4_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH4_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH4_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH4_DT 0x00000002 // Data Toggle +#define USB_RXCSRH4_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT4 register. +// +//***************************************************************************** +#define USB_RXCOUNT4_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT4_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE4 register. +// +//***************************************************************************** +#define USB_TXTYPE4_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE4_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE4_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE4_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE4_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE4_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE4_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE4_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE4_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE4_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE4_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE4_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL4 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL4_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL4_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL4_NAKLMT_S \ + 0 +#define USB_TXINTERVAL4_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE4 register. +// +//***************************************************************************** +#define USB_RXTYPE4_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE4_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE4_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE4_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE4_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE4_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE4_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE4_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE4_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE4_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE4_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE4_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL4 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL4_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL4_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL4_NAKLMT_S \ + 0 +#define USB_RXINTERVAL4_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP5 register. +// +//***************************************************************************** +#define USB_TXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP5_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL5 register. +// +//***************************************************************************** +#define USB_TXCSRL5_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL5_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL5_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL5_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL5_STALL 0x00000010 // Send STALL +#define USB_TXCSRL5_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL5_ERROR 0x00000004 // Error +#define USB_TXCSRL5_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL5_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL5_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH5 register. +// +//***************************************************************************** +#define USB_TXCSRH5_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH5_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH5_MODE 0x00000020 // Mode +#define USB_TXCSRH5_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH5_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH5_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH5_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH5_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP5 register. +// +//***************************************************************************** +#define USB_RXMAXP5_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP5_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL5 register. +// +//***************************************************************************** +#define USB_RXCSRL5_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL5_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL5_STALL 0x00000020 // Send STALL +#define USB_RXCSRL5_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL5_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL5_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL5_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL5_ERROR 0x00000004 // Error +#define USB_RXCSRL5_OVER 0x00000004 // Overrun +#define USB_RXCSRL5_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL5_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH5 register. +// +//***************************************************************************** +#define USB_RXCSRH5_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH5_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH5_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH5_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH5_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH5_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH5_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH5_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH5_DT 0x00000002 // Data Toggle +#define USB_RXCSRH5_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT5 register. +// +//***************************************************************************** +#define USB_RXCOUNT5_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT5_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE5 register. +// +//***************************************************************************** +#define USB_TXTYPE5_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE5_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE5_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE5_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE5_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE5_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE5_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE5_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE5_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE5_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE5_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE5_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL5 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL5_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL5_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL5_NAKLMT_S \ + 0 +#define USB_TXINTERVAL5_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE5 register. +// +//***************************************************************************** +#define USB_RXTYPE5_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE5_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE5_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE5_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE5_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE5_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE5_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE5_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE5_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE5_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE5_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE5_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL5 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL5_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL5_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL5_TXPOLL_S \ + 0 +#define USB_RXINTERVAL5_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP6 register. +// +//***************************************************************************** +#define USB_TXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP6_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL6 register. +// +//***************************************************************************** +#define USB_TXCSRL6_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL6_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL6_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL6_STALL 0x00000010 // Send STALL +#define USB_TXCSRL6_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL6_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL6_ERROR 0x00000004 // Error +#define USB_TXCSRL6_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL6_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL6_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH6 register. +// +//***************************************************************************** +#define USB_TXCSRH6_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH6_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH6_MODE 0x00000020 // Mode +#define USB_TXCSRH6_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH6_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH6_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH6_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH6_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP6 register. +// +//***************************************************************************** +#define USB_RXMAXP6_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP6_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL6 register. +// +//***************************************************************************** +#define USB_RXCSRL6_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL6_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL6_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL6_STALL 0x00000020 // Send STALL +#define USB_RXCSRL6_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL6_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL6_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL6_ERROR 0x00000004 // Error +#define USB_RXCSRL6_OVER 0x00000004 // Overrun +#define USB_RXCSRL6_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL6_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH6 register. +// +//***************************************************************************** +#define USB_RXCSRH6_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH6_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH6_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH6_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH6_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH6_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH6_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH6_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH6_DT 0x00000002 // Data Toggle +#define USB_RXCSRH6_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT6 register. +// +//***************************************************************************** +#define USB_RXCOUNT6_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT6_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE6 register. +// +//***************************************************************************** +#define USB_TXTYPE6_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE6_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE6_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE6_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE6_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE6_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE6_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE6_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE6_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE6_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE6_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE6_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL6 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL6_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL6_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL6_TXPOLL_S \ + 0 +#define USB_TXINTERVAL6_NAKLMT_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE6 register. +// +//***************************************************************************** +#define USB_RXTYPE6_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE6_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE6_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE6_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE6_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE6_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE6_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE6_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE6_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE6_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE6_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE6_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL6 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL6_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL6_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL6_NAKLMT_S \ + 0 +#define USB_RXINTERVAL6_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXMAXP7 register. +// +//***************************************************************************** +#define USB_TXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_TXMAXP7_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRL7 register. +// +//***************************************************************************** +#define USB_TXCSRL7_NAKTO 0x00000080 // NAK Timeout +#define USB_TXCSRL7_CLRDT 0x00000040 // Clear Data Toggle +#define USB_TXCSRL7_STALLED 0x00000020 // Endpoint Stalled +#define USB_TXCSRL7_STALL 0x00000010 // Send STALL +#define USB_TXCSRL7_SETUP 0x00000010 // Setup Packet +#define USB_TXCSRL7_FLUSH 0x00000008 // Flush FIFO +#define USB_TXCSRL7_ERROR 0x00000004 // Error +#define USB_TXCSRL7_UNDRN 0x00000004 // Underrun +#define USB_TXCSRL7_FIFONE 0x00000002 // FIFO Not Empty +#define USB_TXCSRL7_TXRDY 0x00000001 // Transmit Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXCSRH7 register. +// +//***************************************************************************** +#define USB_TXCSRH7_AUTOSET 0x00000080 // Auto Set +#define USB_TXCSRH7_ISO 0x00000040 // Isochronous Transfers +#define USB_TXCSRH7_MODE 0x00000020 // Mode +#define USB_TXCSRH7_DMAEN 0x00000010 // DMA Request Enable +#define USB_TXCSRH7_FDT 0x00000008 // Force Data Toggle +#define USB_TXCSRH7_DMAMOD 0x00000004 // DMA Request Mode +#define USB_TXCSRH7_DTWE 0x00000002 // Data Toggle Write Enable +#define USB_TXCSRH7_DT 0x00000001 // Data Toggle + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXMAXP7 register. +// +//***************************************************************************** +#define USB_RXMAXP7_MAXLOAD_M 0x000007FF // Maximum Payload +#define USB_RXMAXP7_MAXLOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRL7 register. +// +//***************************************************************************** +#define USB_RXCSRL7_CLRDT 0x00000080 // Clear Data Toggle +#define USB_RXCSRL7_STALLED 0x00000040 // Endpoint Stalled +#define USB_RXCSRL7_REQPKT 0x00000020 // Request Packet +#define USB_RXCSRL7_STALL 0x00000020 // Send STALL +#define USB_RXCSRL7_FLUSH 0x00000010 // Flush FIFO +#define USB_RXCSRL7_DATAERR 0x00000008 // Data Error +#define USB_RXCSRL7_NAKTO 0x00000008 // NAK Timeout +#define USB_RXCSRL7_ERROR 0x00000004 // Error +#define USB_RXCSRL7_OVER 0x00000004 // Overrun +#define USB_RXCSRL7_FULL 0x00000002 // FIFO Full +#define USB_RXCSRL7_RXRDY 0x00000001 // Receive Packet Ready + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCSRH7 register. +// +//***************************************************************************** +#define USB_RXCSRH7_AUTOCL 0x00000080 // Auto Clear +#define USB_RXCSRH7_ISO 0x00000040 // Isochronous Transfers +#define USB_RXCSRH7_AUTORQ 0x00000040 // Auto Request +#define USB_RXCSRH7_DMAEN 0x00000020 // DMA Request Enable +#define USB_RXCSRH7_PIDERR 0x00000010 // PID Error +#define USB_RXCSRH7_DISNYET 0x00000010 // Disable NYET +#define USB_RXCSRH7_DMAMOD 0x00000008 // DMA Request Mode +#define USB_RXCSRH7_DTWE 0x00000004 // Data Toggle Write Enable +#define USB_RXCSRH7_DT 0x00000002 // Data Toggle +#define USB_RXCSRH7_INCOMPRX 0x00000001 // Incomplete RX Transmission + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXCOUNT7 register. +// +//***************************************************************************** +#define USB_RXCOUNT7_COUNT_M 0x00001FFF // Receive Packet Count +#define USB_RXCOUNT7_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXTYPE7 register. +// +//***************************************************************************** +#define USB_TXTYPE7_SPEED_M 0x000000C0 // Operating Speed +#define USB_TXTYPE7_SPEED_DFLT 0x00000000 // Default +#define USB_TXTYPE7_SPEED_HIGH 0x00000040 // High +#define USB_TXTYPE7_SPEED_FULL 0x00000080 // Full +#define USB_TXTYPE7_SPEED_LOW 0x000000C0 // Low +#define USB_TXTYPE7_PROTO_M 0x00000030 // Protocol +#define USB_TXTYPE7_PROTO_CTRL 0x00000000 // Control +#define USB_TXTYPE7_PROTO_ISOC 0x00000010 // Isochronous +#define USB_TXTYPE7_PROTO_BULK 0x00000020 // Bulk +#define USB_TXTYPE7_PROTO_INT 0x00000030 // Interrupt +#define USB_TXTYPE7_TEP_M 0x0000000F // Target Endpoint Number +#define USB_TXTYPE7_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXINTERVAL7 +// register. +// +//***************************************************************************** +#define USB_TXINTERVAL7_TXPOLL_M \ + 0x000000FF // TX Polling +#define USB_TXINTERVAL7_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_TXINTERVAL7_NAKLMT_S \ + 0 +#define USB_TXINTERVAL7_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXTYPE7 register. +// +//***************************************************************************** +#define USB_RXTYPE7_SPEED_M 0x000000C0 // Operating Speed +#define USB_RXTYPE7_SPEED_DFLT 0x00000000 // Default +#define USB_RXTYPE7_SPEED_HIGH 0x00000040 // High +#define USB_RXTYPE7_SPEED_FULL 0x00000080 // Full +#define USB_RXTYPE7_SPEED_LOW 0x000000C0 // Low +#define USB_RXTYPE7_PROTO_M 0x00000030 // Protocol +#define USB_RXTYPE7_PROTO_CTRL 0x00000000 // Control +#define USB_RXTYPE7_PROTO_ISOC 0x00000010 // Isochronous +#define USB_RXTYPE7_PROTO_BULK 0x00000020 // Bulk +#define USB_RXTYPE7_PROTO_INT 0x00000030 // Interrupt +#define USB_RXTYPE7_TEP_M 0x0000000F // Target Endpoint Number +#define USB_RXTYPE7_TEP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXINTERVAL7 +// register. +// +//***************************************************************************** +#define USB_RXINTERVAL7_TXPOLL_M \ + 0x000000FF // RX Polling +#define USB_RXINTERVAL7_NAKLMT_M \ + 0x000000FF // NAK Limit +#define USB_RXINTERVAL7_NAKLMT_S \ + 0 +#define USB_RXINTERVAL7_TXPOLL_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAINTR register. +// +//***************************************************************************** +#define USB_DMAINTR_CH7 0x00000080 // Channel 7 DMA Interrupt +#define USB_DMAINTR_CH6 0x00000040 // Channel 6 DMA Interrupt +#define USB_DMAINTR_CH5 0x00000020 // Channel 5 DMA Interrupt +#define USB_DMAINTR_CH4 0x00000010 // Channel 4 DMA Interrupt +#define USB_DMAINTR_CH3 0x00000008 // Channel 3 DMA Interrupt +#define USB_DMAINTR_CH2 0x00000004 // Channel 2 DMA Interrupt +#define USB_DMAINTR_CH1 0x00000002 // Channel 1 DMA Interrupt +#define USB_DMAINTR_CH0 0x00000001 // Channel 0 DMA Interrupt + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL0 register. +// +//***************************************************************************** +#define USB_DMACTL0_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL0_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL0_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL0_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL0_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL0_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL0_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL0_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL0_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL0_DIR 0x00000002 // DMA Direction +#define USB_DMACTL0_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL0_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR0 register. +// +//***************************************************************************** +#define USB_DMAADDR0_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR0_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT0 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT0_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT0_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL1 register. +// +//***************************************************************************** +#define USB_DMACTL1_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL1_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL1_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL1_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL1_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL1_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL1_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL1_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL1_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL1_DIR 0x00000002 // DMA Direction +#define USB_DMACTL1_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL1_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR1 register. +// +//***************************************************************************** +#define USB_DMAADDR1_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR1_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT1 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT1_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT1_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL2 register. +// +//***************************************************************************** +#define USB_DMACTL2_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL2_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL2_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL2_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL2_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL2_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL2_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL2_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL2_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL2_DIR 0x00000002 // DMA Direction +#define USB_DMACTL2_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL2_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR2 register. +// +//***************************************************************************** +#define USB_DMAADDR2_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR2_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT2 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT2_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT2_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL3 register. +// +//***************************************************************************** +#define USB_DMACTL3_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL3_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL3_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL3_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL3_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL3_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL3_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL3_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL3_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL3_DIR 0x00000002 // DMA Direction +#define USB_DMACTL3_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL3_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR3 register. +// +//***************************************************************************** +#define USB_DMAADDR3_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR3_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT3 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT3_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT3_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL4 register. +// +//***************************************************************************** +#define USB_DMACTL4_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL4_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL4_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL4_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL4_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL4_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL4_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL4_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL4_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL4_DIR 0x00000002 // DMA Direction +#define USB_DMACTL4_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL4_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR4 register. +// +//***************************************************************************** +#define USB_DMAADDR4_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR4_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT4 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT4_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT4_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL5 register. +// +//***************************************************************************** +#define USB_DMACTL5_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL5_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL5_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL5_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL5_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL5_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL5_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL5_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL5_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL5_DIR 0x00000002 // DMA Direction +#define USB_DMACTL5_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL5_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR5 register. +// +//***************************************************************************** +#define USB_DMAADDR5_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR5_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT5 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT5_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT5_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL6 register. +// +//***************************************************************************** +#define USB_DMACTL6_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL6_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL6_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL6_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL6_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL6_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL6_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL6_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL6_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL6_DIR 0x00000002 // DMA Direction +#define USB_DMACTL6_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL6_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR6 register. +// +//***************************************************************************** +#define USB_DMAADDR6_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR6_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT6 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT6_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT6_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACTL7 register. +// +//***************************************************************************** +#define USB_DMACTL7_BRSTM_M 0x00000600 // Burst Mode +#define USB_DMACTL7_BRSTM_ANY 0x00000000 // Bursts of unspecified length +#define USB_DMACTL7_BRSTM_INC4 0x00000200 // INCR4 or unspecified length +#define USB_DMACTL7_BRSTM_INC8 0x00000400 // INCR8, INCR4 or unspecified + // length +#define USB_DMACTL7_BRSTM_INC16 0x00000600 // INCR16, INCR8, INCR4 or + // unspecified length +#define USB_DMACTL7_ERR 0x00000100 // Bus Error Bit +#define USB_DMACTL7_EP_M 0x000000F0 // Endpoint number +#define USB_DMACTL7_IE 0x00000008 // DMA Interrupt Enable +#define USB_DMACTL7_MODE 0x00000004 // DMA Transfer Mode +#define USB_DMACTL7_DIR 0x00000002 // DMA Direction +#define USB_DMACTL7_ENABLE 0x00000001 // DMA Transfer Enable +#define USB_DMACTL7_EP_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMAADDR7 register. +// +//***************************************************************************** +#define USB_DMAADDR7_ADDR_M 0xFFFFFFFC // DMA Address +#define USB_DMAADDR7_ADDR_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMACOUNT7 +// register. +// +//***************************************************************************** +#define USB_DMACOUNT7_COUNT_M 0xFFFFFFFC // DMA Count +#define USB_DMACOUNT7_COUNT_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT1 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT1_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT1_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT2 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT2_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT2_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT3 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT3_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT3_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT4 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT4_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT4_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT5 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT5_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT5_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT6 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT6_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT6_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RQPKTCOUNT7 +// register. +// +//***************************************************************************** +#define USB_RQPKTCOUNT7_COUNT_M 0x0000FFFF // Block Transfer Packet Count +#define USB_RQPKTCOUNT7_COUNT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_RXDPKTBUFDIS +// register. +// +//***************************************************************************** +#define USB_RXDPKTBUFDIS_EP7 0x00000080 // EP7 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP6 0x00000040 // EP6 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP5 0x00000020 // EP5 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP4 0x00000010 // EP4 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP3 0x00000008 // EP3 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP2 0x00000004 // EP2 RX Double-Packet Buffer + // Disable +#define USB_RXDPKTBUFDIS_EP1 0x00000002 // EP1 RX Double-Packet Buffer + // Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_TXDPKTBUFDIS +// register. +// +//***************************************************************************** +#define USB_TXDPKTBUFDIS_EP7 0x00000080 // EP7 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP6 0x00000040 // EP6 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP5 0x00000020 // EP5 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP4 0x00000010 // EP4 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP3 0x00000008 // EP3 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP2 0x00000004 // EP2 TX Double-Packet Buffer + // Disable +#define USB_TXDPKTBUFDIS_EP1 0x00000002 // EP1 TX Double-Packet Buffer + // Disable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CTO register. +// +//***************************************************************************** +#define USB_CTO_CCTV_M 0x0000FFFF // Configurable Chirp Timeout Value +#define USB_CTO_CCTV_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_HHSRTN register. +// +//***************************************************************************** +#define USB_HHSRTN_HHSRTN_M 0x0000FFFF // HIgh Speed to UTM Operating + // Delay +#define USB_HHSRTN_HHSRTN_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_HSBT register. +// +//***************************************************************************** +#define USB_HSBT_HSBT_M 0x0000000F // High Speed Timeout Adder +#define USB_HSBT_HSBT_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LPMATTR register. +// +//***************************************************************************** +#define USB_LPMATTR_ENDPT_M 0x0000F000 // Endpoint +#define USB_LPMATTR_RMTWAK 0x00000100 // Remote Wake +#define USB_LPMATTR_HIRD_M 0x000000F0 // Host Initiated Resume Duration +#define USB_LPMATTR_LS_M 0x0000000F // Link State +#define USB_LPMATTR_LS_L1 0x00000001 // Sleep State (L1) +#define USB_LPMATTR_ENDPT_S 12 +#define USB_LPMATTR_HIRD_S 4 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LPMCNTRL register. +// +//***************************************************************************** +#define USB_LPMCNTRL_NAK 0x00000010 // LPM NAK +#define USB_LPMCNTRL_EN_M 0x0000000C // LPM Enable +#define USB_LPMCNTRL_EN_NONE 0x00000000 // LPM and Extended transactions + // are not supported. In this case, + // the USB does not respond to LPM + // transactions and LPM + // transactions cause a timeout +#define USB_LPMCNTRL_EN_EXT 0x00000004 // LPM is not supported but + // extended transactions are + // supported. In this case, the USB + // does respond to an LPM + // transaction with a STALL +#define USB_LPMCNTRL_EN_LPMEXT 0x0000000C // The USB supports LPM extended + // transactions. In this case, the + // USB responds with a NYET or an + // ACK as determined by the value + // of TXLPM and other conditions +#define USB_LPMCNTRL_RES 0x00000002 // LPM Resume +#define USB_LPMCNTRL_TXLPM 0x00000001 // Transmit LPM Transaction Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LPMIM register. +// +//***************************************************************************** +#define USB_LPMIM_ERR 0x00000020 // LPM Error Interrupt Mask +#define USB_LPMIM_RES 0x00000010 // LPM Resume Interrupt Mask +#define USB_LPMIM_NC 0x00000008 // LPM NC Interrupt Mask +#define USB_LPMIM_ACK 0x00000004 // LPM ACK Interrupt Mask +#define USB_LPMIM_NY 0x00000002 // LPM NY Interrupt Mask +#define USB_LPMIM_STALL 0x00000001 // LPM STALL Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LPMRIS register. +// +//***************************************************************************** +#define USB_LPMRIS_ERR 0x00000020 // LPM Interrupt Status +#define USB_LPMRIS_RES 0x00000010 // LPM Resume Interrupt Status +#define USB_LPMRIS_NC 0x00000008 // LPM NC Interrupt Status +#define USB_LPMRIS_ACK 0x00000004 // LPM ACK Interrupt Status +#define USB_LPMRIS_NY 0x00000002 // LPM NY Interrupt Status +#define USB_LPMRIS_LPMST 0x00000001 // LPM STALL Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_LPMFADDR register. +// +//***************************************************************************** +#define USB_LPMFADDR_ADDR_M 0x0000007F // LPM Function Address +#define USB_LPMFADDR_ADDR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPC register. +// +//***************************************************************************** +#define USB_EPC_PFLTACT_M 0x00000300 // Power Fault Action +#define USB_EPC_PFLTACT_UNCHG 0x00000000 // Unchanged +#define USB_EPC_PFLTACT_TRIS 0x00000100 // Tristate +#define USB_EPC_PFLTACT_LOW 0x00000200 // Low +#define USB_EPC_PFLTACT_HIGH 0x00000300 // High +#define USB_EPC_PFLTAEN 0x00000040 // Power Fault Action Enable +#define USB_EPC_PFLTSEN_HIGH 0x00000020 // Power Fault Sense +#define USB_EPC_PFLTEN 0x00000010 // Power Fault Input Enable +#define USB_EPC_EPENDE 0x00000004 // EPEN Drive Enable +#define USB_EPC_EPEN_M 0x00000003 // External Power Supply Enable + // Configuration +#define USB_EPC_EPEN_LOW 0x00000000 // Power Enable Active Low +#define USB_EPC_EPEN_HIGH 0x00000001 // Power Enable Active High +#define USB_EPC_EPEN_VBLOW 0x00000002 // Power Enable High if VBUS Low + // (OTG only) +#define USB_EPC_EPEN_VBHIGH 0x00000003 // Power Enable High if VBUS High + // (OTG only) + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPCRIS register. +// +//***************************************************************************** +#define USB_EPCRIS_PF 0x00000001 // USB Power Fault Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPCIM register. +// +//***************************************************************************** +#define USB_EPCIM_PF 0x00000001 // USB Power Fault Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_EPCISC register. +// +//***************************************************************************** +#define USB_EPCISC_PF 0x00000001 // USB Power Fault Interrupt Status + // and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DRRIS register. +// +//***************************************************************************** +#define USB_DRRIS_RESUME 0x00000001 // RESUME Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DRIM register. +// +//***************************************************************************** +#define USB_DRIM_RESUME 0x00000001 // RESUME Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DRISC register. +// +//***************************************************************************** +#define USB_DRISC_RESUME 0x00000001 // RESUME Interrupt Status and + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_GPCS register. +// +//***************************************************************************** +#define USB_GPCS_DEVMOD_M 0x00000007 // Device Mode +#define USB_GPCS_DEVMOD_OTG 0x00000000 // Use USB0VBUS and USB0ID pin +#define USB_GPCS_DEVMOD_HOST 0x00000002 // Force USB0VBUS and USB0ID low +#define USB_GPCS_DEVMOD_DEV 0x00000003 // Force USB0VBUS and USB0ID high +#define USB_GPCS_DEVMOD_HOSTVBUS \ + 0x00000004 // Use USB0VBUS and force USB0ID + // low +#define USB_GPCS_DEVMOD_DEVVBUS 0x00000005 // Use USB0VBUS and force USB0ID + // high +#define USB_GPCS_DEVMODOTG 0x00000002 // Enable Device Mode +#define USB_GPCS_DEVMOD 0x00000001 // Device Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDC register. +// +//***************************************************************************** +#define USB_VDC_VBDEN 0x00000001 // VBUS Droop Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDCRIS register. +// +//***************************************************************************** +#define USB_VDCRIS_VD 0x00000001 // VBUS Droop Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDCIM register. +// +//***************************************************************************** +#define USB_VDCIM_VD 0x00000001 // VBUS Droop Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_VDCISC register. +// +//***************************************************************************** +#define USB_VDCISC_VD 0x00000001 // VBUS Droop Interrupt Status and + // Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IDVRIS register. +// +//***************************************************************************** +#define USB_IDVRIS_ID 0x00000001 // ID Valid Detect Raw Interrupt + // Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IDVIM register. +// +//***************************************************************************** +#define USB_IDVIM_ID 0x00000001 // ID Valid Detect Interrupt Mask + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_IDVISC register. +// +//***************************************************************************** +#define USB_IDVISC_ID 0x00000001 // ID Valid Detect Interrupt Status + // and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_DMASEL register. +// +//***************************************************************************** +#define USB_DMASEL_DMACTX_M 0x00F00000 // DMA C TX Select +#define USB_DMASEL_DMACRX_M 0x000F0000 // DMA C RX Select +#define USB_DMASEL_DMABTX_M 0x0000F000 // DMA B TX Select +#define USB_DMASEL_DMABRX_M 0x00000F00 // DMA B RX Select +#define USB_DMASEL_DMAATX_M 0x000000F0 // DMA A TX Select +#define USB_DMASEL_DMAARX_M 0x0000000F // DMA A RX Select +#define USB_DMASEL_DMACTX_S 20 +#define USB_DMASEL_DMACRX_S 16 +#define USB_DMASEL_DMABTX_S 12 +#define USB_DMASEL_DMABRX_S 8 +#define USB_DMASEL_DMAATX_S 4 +#define USB_DMASEL_DMAARX_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_PP register. +// +//***************************************************************************** +#define USB_PP_ECNT_M 0x0000FF00 // Endpoint Count +#define USB_PP_USB_M 0x000000C0 // USB Capability +#define USB_PP_USB_DEVICE 0x00000040 // DEVICE +#define USB_PP_USB_HOSTDEVICE 0x00000080 // HOST +#define USB_PP_USB_OTG 0x000000C0 // OTG +#define USB_PP_ULPI 0x00000020 // ULPI Present +#define USB_PP_PHY 0x00000010 // PHY Present +#define USB_PP_TYPE_M 0x0000000F // Controller Type +#define USB_PP_TYPE_0 0x00000000 // The first-generation USB + // controller +#define USB_PP_TYPE_1 0x00000001 // Second-generation USB + // controller.The controller + // implemented in post Icestorm + // devices that use the 3.0 version + // of the Mentor controller +#define USB_PP_ECNT_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_PC register. +// +//***************************************************************************** +#define USB_PC_ULPIEN 0x00010000 // ULPI Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the USB_O_CC register. +// +//***************************************************************************** +#define USB_CC_CLKEN 0x00000200 // USB Clock Enable +#define USB_CC_CSD 0x00000100 // Clock Source/Direction +#define USB_CC_CLKDIV_M 0x0000000F // PLL Clock Divisor +#define USB_CC_CLKDIV_S 0 + +#endif // __HW_USB_H__ diff --git a/os/common/ext/TivaWare/inc/hw_watchdog.h b/os/common/ext/TivaWare/inc/hw_watchdog.h new file mode 100644 index 0000000..f15948b --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_watchdog.h @@ -0,0 +1,122 @@ +//***************************************************************************** +// +// hw_watchdog.h - Macros used when accessing the Watchdog Timer hardware. +// +// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_WATCHDOG_H__ +#define __HW_WATCHDOG_H__ + +//***************************************************************************** +// +// The following are defines for the Watchdog Timer register offsets. +// +//***************************************************************************** +#define WDT_O_LOAD 0x00000000 // Watchdog Load +#define WDT_O_VALUE 0x00000004 // Watchdog Value +#define WDT_O_CTL 0x00000008 // Watchdog Control +#define WDT_O_ICR 0x0000000C // Watchdog Interrupt Clear +#define WDT_O_RIS 0x00000010 // Watchdog Raw Interrupt Status +#define WDT_O_MIS 0x00000014 // Watchdog Masked Interrupt Status +#define WDT_O_TEST 0x00000418 // Watchdog Test +#define WDT_O_LOCK 0x00000C00 // Watchdog Lock + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_LOAD register. +// +//***************************************************************************** +#define WDT_LOAD_M 0xFFFFFFFF // Watchdog Load Value +#define WDT_LOAD_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_VALUE register. +// +//***************************************************************************** +#define WDT_VALUE_M 0xFFFFFFFF // Watchdog Value +#define WDT_VALUE_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_CTL register. +// +//***************************************************************************** +#define WDT_CTL_WRC 0x80000000 // Write Complete +#define WDT_CTL_INTTYPE 0x00000004 // Watchdog Interrupt Type +#define WDT_CTL_RESEN 0x00000002 // Watchdog Reset Enable +#define WDT_CTL_INTEN 0x00000001 // Watchdog Interrupt Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_ICR register. +// +//***************************************************************************** +#define WDT_ICR_M 0xFFFFFFFF // Watchdog Interrupt Clear +#define WDT_ICR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_RIS register. +// +//***************************************************************************** +#define WDT_RIS_WDTRIS 0x00000001 // Watchdog Raw Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_MIS register. +// +//***************************************************************************** +#define WDT_MIS_WDTMIS 0x00000001 // Watchdog Masked Interrupt Status + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_TEST register. +// +//***************************************************************************** +#define WDT_TEST_STALL 0x00000100 // Watchdog Stall Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the WDT_O_LOCK register. +// +//***************************************************************************** +#define WDT_LOCK_M 0xFFFFFFFF // Watchdog Lock +#define WDT_LOCK_UNLOCKED 0x00000000 // Unlocked +#define WDT_LOCK_LOCKED 0x00000001 // Locked +#define WDT_LOCK_UNLOCK 0x1ACCE551 // Unlocks the watchdog timer + +#endif // __HW_WATCHDOG_H__ |