diff options
Diffstat (limited to 'os/hal/boards/NRF52-DK/board.c')
-rw-r--r-- | os/hal/boards/NRF52-DK/board.c | 81 |
1 files changed, 81 insertions, 0 deletions
diff --git a/os/hal/boards/NRF52-DK/board.c b/os/hal/boards/NRF52-DK/board.c new file mode 100644 index 0000000..cfbf24d --- /dev/null +++ b/os/hal/boards/NRF52-DK/board.c @@ -0,0 +1,81 @@ +/* + Copyright (C) 2016 Stéphane D'Alu + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "hal.h" + +#if HAL_USE_PAL || defined(__DOXYGEN__) + +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +const PALConfig pal_default_config = +{ + .pads = { + PAL_MODE_UNCONNECTED, /* P0.0 : XTAL (32MHz) */ + PAL_MODE_UNCONNECTED, /* P0.1 : XTAL (32MHz) */ + PAL_MODE_UNCONNECTED, /* P0.2 */ + PAL_MODE_UNCONNECTED, /* P0.3 */ + PAL_MODE_UNCONNECTED, /* P0.4 */ + PAL_MODE_OUTPUT_PUSHPULL, /* P0.5 : UART_RTS */ + PAL_MODE_OUTPUT_PUSHPULL, /* P0.6 : UART_TX */ + PAL_MODE_INPUT_PULLUP, /* P0.7 : UART_CTS */ + PAL_MODE_INPUT_PULLUP, /* P0.8 : UART_RX */ + PAL_MODE_UNCONNECTED, /* P0.9 */ + PAL_MODE_UNCONNECTED, /* P0.10 */ + PAL_MODE_UNCONNECTED, /* P0.11 */ + PAL_MODE_UNCONNECTED, /* P0.12 */ + PAL_MODE_INPUT_PULLUP, /* P0.13: BTN1 */ + PAL_MODE_INPUT_PULLUP, /* P0.14: BTN2 */ + PAL_MODE_INPUT_PULLUP, /* P0.15: BTN3 */ + PAL_MODE_INPUT_PULLUP, /* P0.16: BTN4 */ + PAL_MODE_OUTPUT_PUSHPULL, /* P0.17: LED1 */ + PAL_MODE_OUTPUT_PUSHPULL, /* P0.18: LED2 */ + PAL_MODE_OUTPUT_PUSHPULL, /* P0.19: LED3 */ + PAL_MODE_OUTPUT_PUSHPULL, /* P0.20: LED4 */ + PAL_MODE_UNCONNECTED, /* P0.21 */ + PAL_MODE_OUTPUT_PUSHPULL, /* P0.22: SPI_SS */ + PAL_MODE_INPUT_PULLUP, /* P0.23: SPI_MISO */ + PAL_MODE_OUTPUT_PUSHPULL, /* P0.24: SPI_MOSI */ + PAL_MODE_OUTPUT_PUSHPULL, /* P0.25: SPI_SCK */ + PAL_MODE_OUTPUT_OPENDRAIN, /* P0.26: SDA */ + PAL_MODE_OUTPUT_OPENDRAIN, /* P0.27: SCL */ + PAL_MODE_UNCONNECTED, /* P0.28 */ + PAL_MODE_UNCONNECTED, /* P0.29 */ + PAL_MODE_UNCONNECTED, /* P0.30 */ + PAL_MODE_UNCONNECTED, /* P0.31 */ + }, +}; +#endif + +/** + * @brief Early initialization code. + * @details This initialization is performed just after reset before BSS and + * DATA segments initialization. + */ +void __early_init(void) +{ +} + +/** + * @brief Late initialization code. + * @note This initialization is performed after BSS and DATA segments + * initialization and before invoking the main() function. + */ +void boardInit(void) +{ +} |