diff options
Diffstat (limited to 'os/hal/ports/KINETIS/LLD/hal_usb_lld.c')
-rw-r--r-- | os/hal/ports/KINETIS/LLD/hal_usb_lld.c | 832 |
1 files changed, 832 insertions, 0 deletions
diff --git a/os/hal/ports/KINETIS/LLD/hal_usb_lld.c b/os/hal/ports/KINETIS/LLD/hal_usb_lld.c new file mode 100644 index 0000000..159aef9 --- /dev/null +++ b/os/hal/ports/KINETIS/LLD/hal_usb_lld.c @@ -0,0 +1,832 @@ +/*
+ ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde/
+ (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file KINETIS/LLD/usb_lld.c
+ * @brief KINETIS USB subsystem low level driver source.
+ *
+ * @addtogroup USB
+ * @{
+ */
+
+#include <string.h>
+
+#include "hal.h"
+
+#if HAL_USE_USB || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief USB0 driver identifier.*/
+#if KINETIS_USB_USE_USB0 || defined(__DOXYGEN__)
+USBDriver USBD1;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/**
+ * @brief IN EP0 state.
+ */
+USBInEndpointState ep0in;
+
+/**
+ * @brief OUT EP0 state.
+ */
+USBOutEndpointState ep0out;
+
+/**
+ * @brief Buffer for the EP0 setup packets.
+ */
+static uint8_t ep0setup_buffer[8];
+
+/**
+ * @brief EP0 initialization structure.
+ */
+static const USBEndpointConfig ep0config = {
+ USB_EP_MODE_TYPE_CTRL,
+ _usb_ep0setup,
+ _usb_ep0in,
+ _usb_ep0out,
+ 64,
+ 64,
+ &ep0in,
+ &ep0out,
+ 1,
+ ep0setup_buffer
+};
+
+/*
+ * Buffer Descriptor Table (BDT)
+ */
+
+/*
+ * Buffer Descriptor (BD)
+ * */
+typedef struct {
+ uint32_t desc;
+ uint8_t* addr;
+} bd_t;
+
+/*
+ * Buffer Descriptor fields - p.889
+ */
+#define BDT_OWN 0x80
+#define BDT_DATA 0x40
+#define BDT_KEEP 0x20
+#define BDT_NINC 0x10
+#define BDT_DTS 0x08
+#define BDT_STALL 0x04
+
+#define BDT_DESC(bc, data) (BDT_OWN | BDT_DTS | ((data&0x1)<<6) | ((bc) << 16))
+
+/*
+ * BDT PID - p.891
+ */
+#define BDT_PID_OUT 0x01
+#define BDT_PID_IN 0x09
+#define BDT_PID_SETUP 0x0D
+#define BDT_TOK_PID(n) (((n)>>2)&0xF)
+
+/*
+ * BDT index fields
+ */
+#define DATA0 0
+#define DATA1 1
+
+#define RX 0
+#define TX 1
+
+#define EVEN 0
+#define ODD 1
+
+#define BDT_INDEX(endpoint, tx, odd) (((endpoint)<<2) | ((tx)<<1) | (odd))
+/*
+ * Get RX-ed/TX-ed bytes count from BDT entry
+ */
+#define BDT_BC(n) (((n)>>16)&0x3FF)
+
+/* The USB-FS needs 2 BDT entry per endpoint direction
+ * that adds to: 2*2*16 BDT entries for 16 bi-directional EP
+ */
+static volatile bd_t _bdt[(KINETIS_USB_ENDPOINTS)*2*2] __attribute__((aligned(512)));
+
+/* FIXME later with dyn alloc
+ * 16 EP
+ * 2 directions per EP
+ * 2 buffer per direction
+ * => 64 buffers
+ */
+static uint8_t _usbb[KINETIS_USB_ENDPOINTS*4][64] __attribute__((aligned(4)));
+static volatile uint8_t _usbbn=0;
+uint8_t* usb_alloc(uint8_t size)
+{
+ (void)size;
+ if(_usbbn < (KINETIS_USB_ENDPOINTS)*4)
+ return _usbb[_usbbn++];
+ while(1); /* Should not happen, ever */
+}
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/* Called from locked ISR. */
+void usb_packet_transmit(USBDriver *usbp, usbep_t ep, size_t n)
+{
+ const USBEndpointConfig *epc = usbp->epc[ep];
+ USBInEndpointState *isp = epc->in_state;
+
+ bd_t *bd = (bd_t *)&_bdt[BDT_INDEX(ep, TX, isp->odd_even)];
+
+ if (n > (size_t)epc->in_maxsize)
+ n = (size_t)epc->in_maxsize;
+
+ /* Copy from buf to _usbb[] */
+ size_t i=0;
+ for(i=0;i<n;i++)
+ bd->addr[i] = isp->txbuf[i];
+
+ /* Update the Buffer status */
+ bd->desc = BDT_DESC(n, isp->data_bank);
+ /* Toggle the odd and data bits for next TX */
+ isp->data_bank ^= DATA1;
+ isp->odd_even ^= ODD;
+}
+
+/* Called from locked ISR. */
+void usb_packet_receive(USBDriver *usbp, usbep_t ep, size_t n)
+{
+ const USBEndpointConfig *epc = usbp->epc[ep];
+ USBOutEndpointState *osp = epc->out_state;
+
+ bd_t *bd = (bd_t *)&_bdt[BDT_INDEX(ep, RX, osp->odd_even)];
+
+ if (n > (size_t)epc->out_maxsize)
+ n = (size_t)epc->out_maxsize;
+
+ /* Copy from _usbb[] to buf */
+ size_t i=0;
+ for(i=0;i<n;i++)
+ osp->rxbuf[i] = bd->addr[i];
+
+ /* Update the Buffer status
+ * Set current buffer to same DATA bank and then toggle.
+ * Since even/odd buffers are ping-pong and setup re-initialized them
+ * this should work correctly */
+ bd->desc = BDT_DESC(epc->out_maxsize, osp->data_bank);
+ osp->data_bank ^= DATA1;
+ usb_lld_start_out(usbp, ep);
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*============================================================================*/
+
+#if KINETIS_USB_USE_USB0 || defined(__DOXYGEN__)
+/**
+ * @brief USB interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(KINETIS_USB_IRQ_VECTOR) {
+ USBDriver *usbp = &USBD1;
+ uint8_t istat = USB0->ISTAT;
+
+ OSAL_IRQ_PROLOGUE();
+
+ /* 04 - Bit2 - Start Of Frame token received */
+ if(istat & USBx_ISTAT_SOFTOK) {
+ _usb_isr_invoke_sof_cb(usbp);
+ USB0->ISTAT = USBx_ISTAT_SOFTOK;
+ }
+
+ /* 08 - Bit3 - Token processing completed */
+ while(istat & USBx_ISTAT_TOKDNE) {
+ uint8_t stat = USB0->STAT;
+ uint8_t ep = stat >> 4;
+ if(ep > KINETIS_USB_ENDPOINTS) {
+ OSAL_IRQ_EPILOGUE();
+ return;
+ }
+ const USBEndpointConfig *epc = usbp->epc[ep];
+
+ /* Get the correct BDT entry */
+ uint8_t odd_even = (stat & USBx_STAT_ODD_MASK) >> USBx_STAT_ODD_SHIFT;
+ uint8_t tx_rx = (stat & USBx_STAT_TX_MASK) >> USBx_STAT_TX_SHIFT;
+ bd_t *bd = (bd_t*)&_bdt[BDT_INDEX(ep,tx_rx,odd_even)];
+
+ /* Update the ODD/EVEN state for RX */
+ if(tx_rx == RX && epc->out_state != NULL)
+ epc->out_state->odd_even = odd_even;
+
+ switch(BDT_TOK_PID(bd->desc))
+ {
+ case BDT_PID_SETUP: // SETUP
+ {
+ /* Clear any pending IN stuff */
+ _bdt[BDT_INDEX(ep, TX, EVEN)].desc = 0;
+ _bdt[BDT_INDEX(ep, TX, ODD)].desc = 0;
+ /* Also in the chibios state machine */
+ (usbp)->receiving &= ~1;
+ /* After a SETUP, IN is always DATA1 */
+ usbp->epc[ep]->in_state->data_bank = DATA1;
+
+ /* Call SETUP function (ChibiOS core), which sends back stuff */
+ _usb_isr_invoke_setup_cb(usbp, ep);
+ /* Buffer is released by the above callback. */
+ /* from Paul: "unfreeze the USB, now that we're ready" */
+ USB0->CTL = USBx_CTL_USBENSOFEN;
+ } break;
+ case BDT_PID_IN: // IN
+ {
+ if(epc->in_state == NULL)
+ break;
+ /* Special case for SetAddress for EP0 */
+ if(ep == 0 && (((uint16_t)usbp->setup[0]<<8)|usbp->setup[1]) == 0x0500)
+ {
+ usbp->address = usbp->setup[2];
+ usb_lld_set_address(usbp);
+ _usb_isr_invoke_event_cb(usbp, USB_EVENT_ADDRESS);
+ usbp->state = USB_SELECTED;
+ }
+ uint16_t txed = BDT_BC(bd->desc);
+ epc->in_state->txcnt += txed;
+ if(epc->in_state->txcnt < epc->in_state->txsize)
+ {
+ epc->in_state->txbuf += txed;
+ osalSysLockFromISR();
+ usb_packet_transmit(usbp,ep,epc->in_state->txsize - epc->in_state->txcnt);
+ osalSysUnlockFromISR();
+ }
+ else
+ {
+ if(epc->in_cb != NULL)
+ _usb_isr_invoke_in_cb(usbp,ep);
+ }
+ } break;
+ case BDT_PID_OUT: // OUT
+ {
+ if(epc->out_state == NULL)
+ break;
+ uint16_t rxed = BDT_BC(bd->desc);
+
+ osalSysLockFromISR();
+ usb_packet_receive(usbp,ep,rxed);
+ osalSysUnlockFromISR();
+ if(rxed)
+ {
+ epc->out_state->rxbuf += rxed;
+
+ /* Update transaction data */
+ epc->out_state->rxcnt += rxed;
+ epc->out_state->rxsize -= rxed;
+ epc->out_state->rxpkts -= 1;
+
+ /* The transaction is completed if the specified number of packets
+ has been received or the current packet is a short packet.*/
+ if ((rxed < epc->out_maxsize) || (epc->out_state->rxpkts == 0))
+ {
+ if(epc->out_cb != NULL)
+ _usb_isr_invoke_out_cb(usbp, ep);
+ }
+ }
+ } break;
+ default:
+ break;
+ }
+ USB0->ISTAT = USBx_ISTAT_TOKDNE;
+ istat = USB0->ISTAT;
+ }
+
+ /* 01 - Bit0 - Valid USB Reset received */
+ if(istat & USBx_ISTAT_USBRST) {
+ _usb_reset(usbp);
+ USB0->ISTAT = USBx_ISTAT_USBRST;
+ OSAL_IRQ_EPILOGUE();
+ return;
+ }
+
+ /* 80 - Bit7 - STALL handshake received */
+ if(istat & USBx_ISTAT_STALL) {
+ USB0->ISTAT = USBx_ISTAT_STALL;
+ }
+
+ /* 02 - Bit1 - ERRSTAT condition triggered */
+ if(istat & USBx_ISTAT_ERROR) {
+ uint8_t err = USB0->ERRSTAT;
+ USB0->ERRSTAT = err;
+ USB0->ISTAT = USBx_ISTAT_ERROR;
+ }
+
+ /* 10 - Bit4 - Constant IDLE on USB bus detected */
+ if(istat & USBx_ISTAT_SLEEP) {
+ /* This seems to fire a few times before the device is
+ * configured - need to ignore those occurences somehow. */
+ /* The other option would be to only activate INTEN_SLEEPEN
+ * on CONFIGURED event, but that would need to be done in
+ * user firmware. */
+ if(usbp->state == USB_ACTIVE) {
+ _usb_suspend(usbp);
+ /* Enable interrupt on resume */
+ USB0->INTEN |= USBx_INTEN_RESUMEEN;
+ }
+
+ // low-power version (check!):
+ // enable wakeup interrupt on resume USB signaling
+ // (check that it was a wakeup int with USBx_USBTRC0_USB_RESUME_INT)
+ //? USB0->USBTRC0 |= USBx_USBTRC0_USBRESMEN
+ // suspend the USB module
+ //? USB0->USBCTRL |= USBx_USBCTRL_SUSP;
+
+ USB0->ISTAT = USBx_ISTAT_SLEEP;
+ }
+
+ /* 20 - Bit5 - Resume - Only allowed in sleep=suspend mode */
+ if(istat & USBx_ISTAT_RESUME) {
+ /* Disable interrupt on resume (should be disabled
+ * during normal operation according to datasheet). */
+ USB0->INTEN &= ~USBx_INTEN_RESUMEEN;
+
+ // low power version (check!):
+ // desuspend the USB module
+ //? USB0->USBCTRL &= ~USBx_USBCTRL_SUSP;
+ // maybe also
+ //? USB0->CTL = USBx_CTL_USBENSOFEN;
+ _usb_wakeup(usbp);
+ USB0->ISTAT = USBx_ISTAT_RESUME;
+ }
+
+ /* 40 - Bit6 - ATTACH - used */
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* KINETIS_USB_USE_USB0 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level USB driver initialization.
+ *
+ * @notapi
+ */
+void usb_lld_init(void) {
+ /* Driver initialization.*/
+ usbObjectInit(&USBD1);
+
+#if KINETIS_USB_USE_USB0
+
+ SIM->SOPT2 |= SIM_SOPT2_USBSRC;
+
+#if defined(K20x5) || defined(K20x7)
+
+#if KINETIS_MCG_MODE == KINETIS_MCG_MODE_FEI
+
+ /* MCGOUTCLK is the SYSCLK frequency, so don't divide for USB clock */
+ SIM->CLKDIV2 = SIM_CLKDIV2_USBDIV(0);
+
+#elif KINETIS_MCG_MODE == KINETIS_MCG_MODE_PEE
+
+ #define KINETIS_USBCLK_FREQUENCY 48000000UL
+ uint32_t i,j;
+ for(i=0; i < 2; i++) {
+ for(j=0; j < 8; j++) {
+ if((KINETIS_PLLCLK_FREQUENCY * (i+1)) == (KINETIS_USBCLK_FREQUENCY*(j+1))) {
+ SIM->CLKDIV2 = i | SIM_CLKDIV2_USBDIV(j);
+ goto usbfrac_match_found;
+ }
+ }
+ }
+ usbfrac_match_found:
+ chDbgAssert(i<2 && j <8,"USB Init error");
+
+#else /* KINETIS_MCG_MODE == KINETIS_MCG_MODE_PEE */
+#error USB clock setting not implemented for this KINETIS_MCG_MODE
+#endif /* KINETIS_MCG_MODE == ... */
+
+#elif defined(KL25) || defined (KL26) || defined(KL27)
+
+ /* No extra clock dividers for USB clock */
+
+#else /* defined(KL25) || defined (KL26) || defined(KL27) */
+#error USB driver not implemented for your MCU type
+#endif
+
+#endif /* KINETIS_USB_USE_USB0 */
+}
+
+/**
+ * @brief Configures and activates the USB peripheral.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_start(USBDriver *usbp) {
+ if (usbp->state == USB_STOP) {
+#if KINETIS_USB_USE_USB0
+ if (&USBD1 == usbp) {
+ /* Clear BDT */
+ uint8_t i;
+ for(i=0;i<KINETIS_USB_ENDPOINTS;i++) {
+ _bdt[i].desc=0;
+ _bdt[i].addr=0;
+ }
+
+ /* Enable Clock */
+#if KINETIS_USB0_IS_USBOTG
+ SIM->SCGC4 |= SIM_SCGC4_USBOTG;
+#else /* KINETIS_USB0_IS_USBOTG */
+ SIM->SCGC4 |= SIM_SCGC4_USBFS;
+#endif /* KINETIS_USB0_IS_USBOTG */
+
+#if KINETIS_HAS_USB_CLOCK_RECOVERY
+ USB0->CLK_RECOVER_IRC_EN |= USBx_CLK_RECOVER_IRC_EN_IRC_EN;
+ USB0->CLK_RECOVER_CTRL |= USBx_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN;
+#endif /* KINETIS_HAS_USB_CLOCK_RECOVERY */
+
+ /* Reset USB module, wait for completion */
+ USB0->USBTRC0 |= USBx_USBTRC0_USBRESET;
+ while ((USB0->USBTRC0 & USBx_USBTRC0_USBRESET));
+
+ /* Set BDT Address */
+ USB0->BDTPAGE1 = ((uint32_t)_bdt) >> 8;
+ USB0->BDTPAGE2 = ((uint32_t)_bdt) >> 16;
+ USB0->BDTPAGE3 = ((uint32_t)_bdt) >> 24;
+
+ /* Clear all ISR flags */
+ USB0->ISTAT = 0xFF;
+ USB0->ERRSTAT = 0xFF;
+#if KINETIS_USB0_IS_USBOTG
+ USB0->OTGISTAT = 0xFF;
+#endif /* KINETIS_USB0_IS_USBOTG */
+ USB0->USBTRC0 |= 0x40; //a hint was given that this is an undocumented interrupt bit
+
+ /* Enable USB */
+ USB0->CTL = USBx_CTL_ODDRST | USBx_CTL_USBENSOFEN;
+ USB0->USBCTRL = 0;
+
+ /* Enable reset interrupt */
+ USB0->INTEN |= USBx_INTEN_USBRSTEN;
+
+ /* Enable interrupt in NVIC */
+#if KINETIS_USB0_IS_USBOTG
+ nvicEnableVector(USB_OTG_IRQn, KINETIS_USB_USB0_IRQ_PRIORITY);
+#else /* KINETIS_USB0_IS_USBOTG */
+ nvicEnableVector(USB_IRQn, KINETIS_USB_USB0_IRQ_PRIORITY);
+#endif /* KINETIS_USB0_IS_USBOTG */
+ }
+#endif /* KINETIS_USB_USE_USB0 */
+ }
+}
+
+/**
+ * @brief Deactivates the USB peripheral.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_stop(USBDriver *usbp) {
+ /* TODO: If in ready state then disables the USB clock.*/
+ if (usbp->state == USB_STOP) {
+#if KINETIS_USB_USE_USB0
+ if (&USBD1 == usbp) {
+#if KINETIS_USB0_IS_USBOTG
+ nvicDisableVector(USB_OTG_IRQn);
+#else /* KINETIS_USB0_IS_USBOTG */
+ nvicDisableVector(USB_IRQn);
+#endif /* KINETIS_USB0_IS_USBOTG */
+ }
+#endif /* KINETIS_USB_USE_USB0 */
+ }
+}
+
+/**
+ * @brief USB low level reset routine.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_reset(USBDriver *usbp) {
+ // FIXME, dyn alloc
+ _usbbn = 0;
+
+#if KINETIS_USB_USE_USB0
+
+ /* Reset BDT ODD/EVEN bits */
+ USB0->CTL = USBx_CTL_ODDRST;
+
+ /* EP0 initialization.*/
+ usbp->epc[0] = &ep0config;
+ usb_lld_init_endpoint(usbp, 0);
+
+ /* Clear all pending interrupts */
+ USB0->ERRSTAT = 0xFF;
+ USB0->ISTAT = 0xFF;
+
+ /* Set the address to zero during enumeration */
+ usbp->address = 0;
+ USB0->ADDR = 0;
+
+ /* Enable other interrupts */
+ USB0->ERREN = 0xFF;
+ USB0->INTEN = USBx_INTEN_TOKDNEEN |
+ USBx_INTEN_SOFTOKEN |
+ USBx_INTEN_STALLEN |
+ USBx_INTEN_ERROREN |
+ USBx_INTEN_USBRSTEN |
+ USBx_INTEN_SLEEPEN;
+
+ /* "is this necessary?", Paul from PJRC */
+ USB0->CTL = USBx_CTL_USBENSOFEN;
+#endif /* KINETIS_USB_USE_USB0 */
+}
+
+/**
+ * @brief Sets the USB address.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_set_address(USBDriver *usbp) {
+
+#if KINETIS_USB_USE_USB0
+ USB0->ADDR = usbp->address&0x7F;
+#endif /* KINETIS_USB_USE_USB0 */
+}
+
+/**
+ * @brief Enables an endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep) {
+
+ if(ep > KINETIS_USB_ENDPOINTS)
+ return;
+
+ const USBEndpointConfig *epc = usbp->epc[ep];
+ uint8_t mask=0;
+
+ if(epc->out_state != NULL)
+ {
+ /* OUT Endpoint */
+ epc->out_state->odd_even = EVEN;
+ epc->out_state->data_bank = DATA0;
+ /* RXe */
+ _bdt[BDT_INDEX(ep, RX, EVEN)].desc = BDT_DESC(epc->out_maxsize, DATA0);
+ _bdt[BDT_INDEX(ep, RX, EVEN)].addr = usb_alloc(epc->out_maxsize);
+ /* RXo */
+ _bdt[BDT_INDEX(ep, RX, ODD)].desc = BDT_DESC(epc->out_maxsize, DATA1);
+ _bdt[BDT_INDEX(ep, RX, ODD)].addr = usb_alloc(epc->out_maxsize);
+ /* Enable OUT direction */
+ mask |= USBx_ENDPTn_EPRXEN;
+ }
+ if(epc->in_state != NULL)
+ {
+ /* IN Endpoint */
+ epc->in_state->odd_even = EVEN;
+ epc->in_state->data_bank = DATA0;
+ /* TXe, not used yet */
+ _bdt[BDT_INDEX(ep, TX, EVEN)].desc = 0;
+ _bdt[BDT_INDEX(ep, TX, EVEN)].addr = usb_alloc(epc->in_maxsize);
+ /* TXo, not used yet */
+ _bdt[BDT_INDEX(ep, TX, ODD)].desc = 0;
+ _bdt[BDT_INDEX(ep, TX, ODD)].addr = usb_alloc(epc->in_maxsize);
+ /* Enable IN direction */
+ mask |= USBx_ENDPTn_EPTXEN;
+ }
+
+ /* EPHSHK should be set for CTRL, BULK, INTR not for ISOC*/
+ if((epc->ep_mode & USB_EP_MODE_TYPE) != USB_EP_MODE_TYPE_ISOC)
+ mask |= USBx_ENDPTn_EPHSHK;
+ /* Endpoint is not a CTRL endpoint, disable SETUP transfers */
+ if((epc->ep_mode & USB_EP_MODE_TYPE) != USB_EP_MODE_TYPE_CTRL)
+ mask |= USBx_ENDPTn_EPCTLDIS;
+
+#if KINETIS_USB_USE_USB0
+ USB0->ENDPT[ep].V = mask;
+#endif /* KINETIS_USB_USE_USB0 */
+}
+
+/**
+ * @brief Disables all the active endpoints except the endpoint zero.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ *
+ * @notapi
+ */
+void usb_lld_disable_endpoints(USBDriver *usbp) {
+ (void)usbp;
+ uint8_t i;
+#if KINETIS_USB_USE_USB0
+ for(i=1;i<KINETIS_USB_ENDPOINTS;i++)
+ USB0->ENDPT[i].V = 0;
+#endif /* KINETIS_USB_USE_USB0 */
+}
+
+/**
+ * @brief Returns the status of an OUT endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @return The endpoint status.
+ * @retval EP_STATUS_DISABLED The endpoint is not active.
+ * @retval EP_STATUS_STALLED The endpoint is stalled.
+ * @retval EP_STATUS_ACTIVE The endpoint is active.
+ *
+ * @notapi
+ */
+usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep) {
+ (void)usbp;
+#if KINETIS_USB_USE_USB0
+ if(ep > USB_MAX_ENDPOINTS)
+ return EP_STATUS_DISABLED;
+ if(!(USB0->ENDPT[ep].V & (USBx_ENDPTn_EPRXEN)))
+ return EP_STATUS_DISABLED;
+ else if(USB0->ENDPT[ep].V & USBx_ENDPTn_EPSTALL)
+ return EP_STATUS_STALLED;
+ return EP_STATUS_ACTIVE;
+#endif /* KINETIS_USB_USE_USB0 */
+}
+
+/**
+ * @brief Returns the status of an IN endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @return The endpoint status.
+ * @retval EP_STATUS_DISABLED The endpoint is not active.
+ * @retval EP_STATUS_STALLED The endpoint is stalled.
+ * @retval EP_STATUS_ACTIVE The endpoint is active.
+ *
+ * @notapi
+ */
+usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep) {
+ (void)usbp;
+ if(ep > USB_MAX_ENDPOINTS)
+ return EP_STATUS_DISABLED;
+#if KINETIS_USB_USE_USB0
+ if(!(USB0->ENDPT[ep].V & (USBx_ENDPTn_EPTXEN)))
+ return EP_STATUS_DISABLED;
+ else if(USB0->ENDPT[ep].V & USBx_ENDPTn_EPSTALL)
+ return EP_STATUS_STALLED;
+ return EP_STATUS_ACTIVE;
+#endif /* KINETIS_USB_USE_USB0 */
+}
+
+/**
+ * @brief Reads a setup packet from the dedicated packet buffer.
+ * @details This function must be invoked in the context of the @p setup_cb
+ * callback in order to read the received setup packet.
+ * @pre In order to use this function the endpoint must have been
+ * initialized as a control endpoint.
+ * @post The endpoint is ready to accept another packet.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @param[out] buf buffer where to copy the packet data
+ *
+ * @notapi
+ */
+void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf) {
+ /* Get the BDT entry */
+ USBOutEndpointState *os = usbp->epc[ep]->out_state;
+ bd_t *bd = (bd_t*)&_bdt[BDT_INDEX(ep, RX, os->odd_even)];
+ /* Copy the 8 bytes of data */
+ uint8_t n;
+ for (n = 0; n < 8; n++) {
+ buf[n] = bd->addr[n];
+ }
+ /* Release the buffer
+ * Setup packet is always DATA0
+ * Initialize buffers so current expects DATA0 & opposite DATA1 */
+ bd->desc = BDT_DESC(usbp->epc[ep]->out_maxsize,DATA0);
+ _bdt[BDT_INDEX(ep, RX, os->odd_even^ODD)].desc = BDT_DESC(usbp->epc[ep]->out_maxsize,DATA1);
+ os->data_bank = DATA1;
+}
+
+/**
+ * @brief Starts a receive operation on an OUT endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_start_out(USBDriver *usbp, usbep_t ep) {
+ USBOutEndpointState *osp = usbp->epc[ep]->out_state;
+ /* Transfer initialization.*/
+ if (osp->rxsize == 0) /* Special case for zero sized packets.*/
+ osp->rxpkts = 1;
+ else
+ osp->rxpkts = (uint16_t)((osp->rxsize + usbp->epc[ep]->out_maxsize - 1) /
+ usbp->epc[ep]->out_maxsize);
+}
+
+/**
+ * @brief Starts a transmit operation on an IN endpoint.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @note Called from ISR and locked zone.
+ * @notapi
+ */
+void usb_lld_start_in(USBDriver *usbp, usbep_t ep) {
+ (void)usbp;
+ (void)ep;
+ usb_packet_transmit(usbp,ep,usbp->epc[ep]->in_state->txsize);
+}
+
+/**
+ * @brief Brings an OUT endpoint in the stalled state.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_stall_out(USBDriver *usbp, usbep_t ep) {
+ (void)usbp;
+#if KINETIS_USB_USE_USB0
+ USB0->ENDPT[ep].V |= USBx_ENDPTn_EPSTALL;
+#endif /* KINETIS_USB_USE_USB0 */
+}
+
+/**
+ * @brief Brings an IN endpoint in the stalled state.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_stall_in(USBDriver *usbp, usbep_t ep) {
+ (void)usbp;
+#if KINETIS_USB_USE_USB0
+ USB0->ENDPT[ep].V |= USBx_ENDPTn_EPSTALL;
+#endif /* KINETIS_USB_USE_USB0 */
+}
+
+/**
+ * @brief Brings an OUT endpoint in the active state.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_clear_out(USBDriver *usbp, usbep_t ep) {
+ (void)usbp;
+#if KINETIS_USB_USE_USB0
+ USB0->ENDPT[ep].V &= ~USBx_ENDPTn_EPSTALL;
+#endif /* KINETIS_USB_USE_USB0 */
+}
+
+/**
+ * @brief Brings an IN endpoint in the active state.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ *
+ * @notapi
+ */
+void usb_lld_clear_in(USBDriver *usbp, usbep_t ep) {
+ (void)usbp;
+#if KINETIS_USB_USE_USB0
+ USB0->ENDPT[ep].V &= ~USBx_ENDPTn_EPSTALL;
+#endif /* KINETIS_USB_USE_USB0 */
+}
+
+#endif /* HAL_USE_USB */
+
+/** @} */
|