diff options
Diffstat (limited to 'os/hal/ports/TIVA/LLD')
-rw-r--r-- | os/hal/ports/TIVA/LLD/UART/driver.mk | 4 | ||||
-rw-r--r-- | os/hal/ports/TIVA/LLD/UART/hal_uart_lld.c | 826 | ||||
-rw-r--r-- | os/hal/ports/TIVA/LLD/UART/hal_uart_lld.h | 471 |
3 files changed, 1301 insertions, 0 deletions
diff --git a/os/hal/ports/TIVA/LLD/UART/driver.mk b/os/hal/ports/TIVA/LLD/UART/driver.mk index e23dc82..e42f34a 100644 --- a/os/hal/ports/TIVA/LLD/UART/driver.mk +++ b/os/hal/ports/TIVA/LLD/UART/driver.mk @@ -2,8 +2,12 @@ ifeq ($(USE_SMART_BUILD),yes) ifneq ($(findstring HAL_USE_SERIAL TRUE,$(HALCONF)),) PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.c endif +ifneq ($(findstring HAL_USE_UART TRUE,$(HALCONF)),) +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.c +endif else PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.c +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.c endif PLATFORMINC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/UART diff --git a/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.c b/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.c new file mode 100644 index 0000000..374ea6d --- /dev/null +++ b/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.c @@ -0,0 +1,826 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file UART/hal_uart_lld.c + * @brief Tiva low level UART driver code. + * + * @addtogroup UART + * @{ + */ + +#include "hal.h" + +#if HAL_USE_UART || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/** @brief UART0 UART driver identifier.*/ +#if TIVA_UART_USE_UART0 || defined(__DOXYGEN__) +UARTDriver UARTD1; +#endif + +/** @brief UART1 UART driver identifier.*/ +#if TIVA_UART_USE_UART1 || defined(__DOXYGEN__) +UARTDriver UARTD2; +#endif + +/** @brief UART2 UART driver identifier.*/ +#if TIVA_UART_USE_UART2 || defined(__DOXYGEN__) +UARTDriver UARTD3; +#endif + +/** @brief UART3 UART driver identifier.*/ +#if TIVA_UART_USE_UART3 || defined(__DOXYGEN__) +UARTDriver UARTD4; +#endif + +/** @brief UART4 UART driver identifier.*/ +#if TIVA_UART_USE_UART4 || defined(__DOXYGEN__) +UARTDriver UARTD5; +#endif + +/** @brief UART5 UART driver identifier.*/ +#if TIVA_UART_USE_UART5 || defined(__DOXYGEN__) +UARTDriver UARTD6; +#endif + +/** @brief UART6 UART driver identifier.*/ +#if TIVA_UART_USE_UART6 || defined(__DOXYGEN__) +UARTDriver UARTD7; +#endif + +/** @brief UART7 UART driver identifier.*/ +#if TIVA_UART_USE_UART7 || defined(__DOXYGEN__) +UARTDriver UARTD8; +#endif + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +/** + * @brief Status bits translation. + * + * @param[in] err UART LSR register value + * + * @return The error flags. + */ +static uartflags_t translate_errors(uint32_t err) +{ + uartflags_t sts = 0; + + if (err & UART_MIS_FEMIS) + sts |= UART_FRAMING_ERROR; + if (err & UART_MIS_PEMIS) + sts |= UART_PARITY_ERROR; + if (err & UART_MIS_BEMIS) + sts |= UART_BREAK_DETECTED; + if (err & UART_MIS_OEMIS) + sts |= UART_OVERRUN_ERROR; + + return sts; +} + +/** + * @brief Puts the receiver in the UART_RX_IDLE state. + * + * @param[in] uartp pointer to the @p UARTDriver object + */ +static void uart_enter_rx_idle_loop(UARTDriver *uartp) +{ + tiva_udma_table_entry_t *primary = udmaControlTable.primary; + + dmaChannelDisable(uartp->dmarxnr); + + /* Configure for 8-bit transfers.*/ + primary[uartp->dmarxnr].srcendp = (void *)(uartp->uart + UART_O_DR); + primary[uartp->dmarxnr].dstendp = (volatile void *)&uartp->rxbuf; + primary[uartp->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_8 | + UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_NONE | + UDMA_CHCTL_ARBSIZE_4 | + UDMA_CHCTL_XFERSIZE(1) | + UDMA_CHCTL_XFERMODE_BASIC; + + dmaChannelSingleBurst(uartp->dmarxnr); + dmaChannelPrimary(uartp->dmarxnr); + dmaChannelPriorityDefault(uartp->dmarxnr); + dmaChannelEnableRequest(uartp->dmarxnr); + + /* Enable DMA channel, transfer starts immediately.*/ + dmaChannelEnable(uartp->dmarxnr); +} + +/** + * @brief UART de-initialization. + * + * @param[in] uartp pointer to the @p UARTDriver object + */ +static void uart_stop(UARTDriver *uartp) +{ + /* Stops RX and TX DMA channels.*/ + dmaChannelDisable(uartp->dmarxnr); + dmaChannelDisable(uartp->dmatxnr); + + /* Stops USART operations.*/ + HWREG(uartp->uart + UART_O_CTL) &= ~UART_CTL_UARTEN; +} + +/** + * @brief UART initialization. + * + * @param[in] uartp pointer to a @p UARTDriver object + */ +static void uart_init(UARTDriver *uartp) +{ + uint32_t u = uartp->uart; + const UARTConfig *config = uartp->config; + uint32_t brd; + uint32_t speed = config->speed; + uint32_t clock_source; + + if (uartp->config->ctl & UART_CTL_HSE) { + /* High speed mode is enabled, half the baud rate to compensate + * for high speed mode.*/ + speed = (speed + 1) / 2; + } + + if ((config->cc & UART_CC_CS_M) == UART_CC_CS_SYSCLK) { + /* UART is clocked using the SYSCLK.*/ + clock_source = TIVA_SYSCLK * 8; + } + else { + /* UART is clocked using the PIOSC.*/ + clock_source = 16000000 * 8; + } + + /* Calculate the baud rate divisor */ + brd = ((clock_source / speed) + 1) / 2; + + /* Disable UART.*/ + HWREG(u + UART_O_CTL) &= ~UART_CTL_UARTEN; + + /* Set baud rate.*/ + HWREG(u + UART_O_IBRD) = brd / 64; + HWREG(u + UART_O_FBRD) = brd % 64; + + /* Line control/*/ + HWREG(u + UART_O_LCRH) = config->lcrh; + + /* Select clock source.*/ + HWREG(u + UART_O_CC) = config->cc & UART_CC_CS_M; + + /* FIFO configuration.*/ + HWREG(u + UART_O_IFLS) = config->ifls & (UART_IFLS_RX_M | UART_IFLS_TX_M); + + /* Enable interrupts.*/ + HWREG(u + UART_O_IM) = UART_IM_TXIM | UART_IM_OEIM | UART_IM_BEIM | UART_IM_PEIM | UART_IM_FEIM; + + /* Enable DMA for the UART */ + HWREG(u + UART_O_DMACTL) = UART_DMACTL_TXDMAE | UART_DMACTL_RXDMAE | UART_DMACTL_DMAERR; + + /* Note that some bits are enforced.*/ + HWREG(u + UART_O_CTL) = config->ctl | UART_CTL_RXE | UART_CTL_TXE | UART_CTL_UARTEN | UART_CTL_EOT; + + /* Starting the receiver idle loop.*/ + uart_enter_rx_idle_loop(uartp); +} + +/** + * @brief UART common service routine. + * + * @param[in] uartp pointer to the @p UARTDriver object + */ +static void uart_serve_interrupt(UARTDriver *uartp) +{ + uint32_t dmachis = HWREG(UDMA_CHIS); + uint32_t mis = HWREG(uartp->uart + UART_O_MIS); + + if (mis & UART_MIS_TXMIS) { + /* End of transfer */ + _uart_tx2_isr_code(uartp); + } + + if (mis & (UART_MIS_OEMIS | UART_MIS_BEMIS | UART_MIS_PEMIS | UART_MIS_FEMIS)) { + /* Error occurred */ + _uart_rx_error_isr_code(uartp, translate_errors(mis)); + } + + if (dmachis & (1 << uartp->dmarxnr)) { + if (uartp->rxstate == UART_RX_IDLE) { + /* Receiver in idle state, a callback is generated, if enabled, for each + received character and then the driver stays in the same state.*/ + _uart_rx_idle_code(uartp); + uart_enter_rx_idle_loop(uartp); + } + else { + /* Receiver in active state, a callback is generated, if enabled, after + a completed transfer.*/ + _uart_rx_complete_isr_code(uartp); + } + } + + if (dmachis & (1 << uartp->dmatxnr)) { + /* A callback is generated, if enabled, after a completed transfer.*/ + _uart_tx1_isr_code(uartp); + } +} + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + +#if TIVA_UART_USE_UART0 || defined(__DOXYGEN__) +#if !defined(TIVA_UART0_HANDLER) +#error "TIVA_UART0_HANDLER not defined" +#endif +/** + * @brief UART0 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART0_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD1); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART1 || defined(__DOXYGEN__) +#if !defined(TIVA_UART1_HANDLER) +#error "TIVA_UART1_HANDLER not defined" +#endif +/** + * @brief UART1 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART1_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD2); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART2 || defined(__DOXYGEN__) +#if !defined(TIVA_UART2_HANDLER) +#error "TIVA_UART2_HANDLER not defined" +#endif +/** + * @brief UART2 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART2_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD3); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART3 || defined(__DOXYGEN__) +#if !defined(TIVA_UART3_HANDLER) +#error "TIVA_UART3_HANDLER not defined" +#endif +/** + * @brief UART3 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART3_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD4); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART4 || defined(__DOXYGEN__) +#if !defined(TIVA_UART4_HANDLER) +#error "TIVA_UART4_HANDLER not defined" +#endif +/** + * @brief UART4 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART4_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD5); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART5 || defined(__DOXYGEN__) +#if !defined(TIVA_UART5_HANDLER) +#error "TIVA_UART5_HANDLER not defined" +#endif +/** + * @brief UART5 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART5_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD6); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART6 || defined(__DOXYGEN__) +#if !defined(TIVA_UART6_HANDLER) +#error "TIVA_UART6_HANDLER not defined" +#endif +/** + * @brief UART6 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART6_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD7); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART7 || defined(__DOXYGEN__) +#if !defined(TIVA_UART7_HANDLER) +#error "TIVA_UART7_HANDLER not defined" +#endif +/** + * @brief UART7 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART7_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD8); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/** + * @brief Low level UART driver initialization. + * + * @notapi + */ +void uart_lld_init(void) +{ +#if TIVA_UART_USE_UART0 + uartObjectInit(&UARTD1); + UARTD1.uart = UART0_BASE; + UARTD1.dmarxnr = TIVA_UART_UART0_RX_UDMA_CHANNEL; + UARTD1.dmatxnr = TIVA_UART_UART0_TX_UDMA_CHANNEL; + UARTD1.rxchnmap = TIVA_UART_UART0_RX_UDMA_MAPPING; + UARTD1.txchnmap = TIVA_UART_UART0_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART1 + uartObjectInit(&UARTD2); + UARTD2.uart = UART1_BASE; + UARTD2.dmarxnr = TIVA_UART_UART1_RX_UDMA_CHANNEL; + UARTD2.dmatxnr = TIVA_UART_UART1_TX_UDMA_CHANNEL; + UARTD2.rxchnmap = TIVA_UART_UART1_RX_UDMA_MAPPING; + UARTD2.txchnmap = TIVA_UART_UART1_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART2 + uartObjectInit(&UARTD3); + UARTD2.uart = UART2_BASE; + UARTD2.dmarxnr = TIVA_UART_UART2_RX_UDMA_CHANNEL; + UARTD2.dmatxnr = TIVA_UART_UART2_TX_UDMA_CHANNEL; + UARTD2.rxchnmap = TIVA_UART_UART2_RX_UDMA_MAPPING; + UARTD2.txchnmap = TIVA_UART_UART2_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART3 + uartObjectInit(&UARTD4); + UARTD4.uart = UART3_BASE; + UARTD4.dmarxnr = TIVA_UART_UART3_RX_UDMA_CHANNEL; + UARTD4.dmatxnr = TIVA_UART_UART3_TX_UDMA_CHANNEL; + UARTD4.rxchnmap = TIVA_UART_UART3_RX_UDMA_MAPPING; + UARTD4.txchnmap = TIVA_UART_UART3_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART4 + uartObjectInit(&UARTD5); + UARTD5.uart = UART4_BASE; + UARTD5.dmarxnr = TIVA_UART_UART4_RX_UDMA_CHANNEL; + UARTD5.dmatxnr = TIVA_UART_UART4_TX_UDMA_CHANNEL; + UARTD5.rxchnmap = TIVA_UART_UART4_RX_UDMA_MAPPING; + UARTD5.txchnmap = TIVA_UART_UART4_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART5 + uartObjectInit(&UARTD6); + UARTD6.uart = UART5_BASE; + UARTD6.dmarxnr = TIVA_UART_UART5_RX_UDMA_CHANNEL; + UARTD6.dmatxnr = TIVA_UART_UART5_TX_UDMA_CHANNEL; + UARTD6.rxchnmap = TIVA_UART_UART5_RX_UDMA_MAPPING; + UARTD6.txchnmap = TIVA_UART_UART5_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART6 + uartObjectInit(&UARTD7); + UARTD7.uart = UART6_BASE; + UARTD7.dmarxnr = TIVA_UART_UART6_RX_UDMA_CHANNEL; + UARTD7.dmatxnr = TIVA_UART_UART6_TX_UDMA_CHANNEL; + UARTD7.rxchnmap = TIVA_UART_UART6_RX_UDMA_MAPPING; + UARTD7.txchnmap = TIVA_UART_UART6_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART7 + uartObjectInit(&UARTD8); + UARTD8.uart = UART7_BASE; + UARTD8.dmarxnr = TIVA_UART_UART7_RX_UDMA_CHANNEL; + UARTD8.dmatxnr = TIVA_UART_UART7_TX_UDMA_CHANNEL; + UARTD8.rxchnmap = TIVA_UART_UART7_RX_UDMA_MAPPING; + UARTD8.txchnmap = TIVA_UART_UART7_TX_UDMA_MAPPING; +#endif +} + +/** + * @brief Configures and activates the UART peripheral. + * + * @param[in] uartp pointer to the @p UARTDriver object + * + * @notapi + */ +void uart_lld_start(UARTDriver *uartp) { + + if (uartp->state == UART_STOP) { +#if TIVA_UART_USE_UART0 + if (&UARTD1 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 0); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 0))) + ; + + nvicEnableVector(TIVA_UART0_NUMBER, TIVA_UART_UART0_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART1 + if (&UARTD2 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 1); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 1))) + ; + + nvicEnableVector(TIVA_UART1_NUMBER, TIVA_UART_UART1_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART2 + if (&UARTD3 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 2); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 2))) + ; + + nvicEnableVector(TIVA_UART2_NUMBER, TIVA_UART_UART2_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART3 + if (&UARTD4 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 3); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 3))) + ; + + nvicEnableVector(TIVA_UART3_NUMBER, TIVA_UART_UART3_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART4 + if (&UARTD5 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 4); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 4))) + ; + + nvicEnableVector(TIVA_UART4_NUMBER, TIVA_UART_UART4_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART5 + if (&UARTD6 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 5); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 5))) + ; + + nvicEnableVector(TIVA_UART5_NUMBER, TIVA_UART_UART5_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART6 + if (&UARTD7 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 6); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 6))) + ; + + nvicEnableVector(TIVA_UART6_NUMBER, TIVA_UART_UART6_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART7 + if (&UARTD8 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 7); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 7))) + ; + + nvicEnableVector(TIVA_UART7_NUMBER, TIVA_UART_UART7_PRIORITY); + } +#endif + + uartp->rxbuf = 0; + + HWREG(UDMA_CHMAP0 + (uartp->dmarxnr / 8) * 4) |= (uartp->rxchnmap << (uartp->dmarxnr % 8)); + HWREG(UDMA_CHMAP0 + (uartp->dmatxnr / 8) * 4) |= (uartp->txchnmap << (uartp->dmatxnr % 8)); + } + + uartp->rxstate = UART_RX_IDLE; + uartp->txstate = UART_TX_IDLE; + uart_init(uartp); +} + +/** + * @brief Deactivates the UART peripheral. + * + * @param[in] uartp pointer to the @p UARTDriver object + * + * @notapi + */ +void uart_lld_stop(UARTDriver *uartp) { + + if (uartp->state == UART_READY) { + uart_stop(uartp); + udmaChannelRelease(uartp->dmarxnr); + udmaChannelRelease(uartp->dmatxnr); + +#if TIVA_UART_USE_UART0 + if (&UARTD1 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 0); + return; + } +#endif +#if TIVA_UART_USE_UART1 + if (&UARTD2 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 1); + return; + } +#endif +#if TIVA_UART_USE_UART2 + if (&UARTD3 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 2); + return; + } +#endif +#if TIVA_UART_USE_UART3 + if (&UARTD4 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 3); + return; + } +#endif +#if TIVA_UART_USE_UART4 + if (&UARTD5 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 4); + return; + } +#endif +#if TIVA_UART_USE_UART5 + if (&UARTD6 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 5); + return; + } +#endif +#if TIVA_UART_USE_UART6 + if (&UARTD7 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 6); + return; + } +#endif +#if TIVA_UART_USE_UART7 + if (&UARTD8 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 7); + return; + } +#endif + } +} + +/** + * @brief Starts a transmission on the UART peripheral. + * @note The buffers are organized as uint8_t arrays for data sizes below + * or equal to 8 bits else it is organized as uint16_t arrays. + * + * @param[in] uartp pointer to the @p UARTDriver object + * @param[in] n number of data frames to send + * @param[in] txbuf the pointer to the transmit buffer + * + * @notapi + */ +void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf) +{ + tiva_udma_table_entry_t *primary = udmaControlTable.primary; + + /* TODO: This assert should be moved to the dma helper driver */ + osalDbgAssert((uint32_t)txbuf >= SRAM_BASE, "txbuf should be in SRAM region."); + + dmaChannelDisable(uartp->dmatxnr); + + /* Configure for 8-bit transfers.*/ + primary[uartp->dmatxnr].srcendp = (volatile void *)txbuf+n-1; + primary[uartp->dmatxnr].dstendp = (void *)(uartp->uart + UART_O_DR); + primary[uartp->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_NONE | + UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_8 | + UDMA_CHCTL_ARBSIZE_4 | + UDMA_CHCTL_XFERSIZE(n) | + UDMA_CHCTL_XFERMODE_BASIC; + + dmaChannelSingleBurst(uartp->dmatxnr); + dmaChannelPrimary(uartp->dmatxnr); + dmaChannelPriorityDefault(uartp->dmatxnr); + dmaChannelEnableRequest(uartp->dmatxnr); + + /* Enable DMA channel, transfer starts immediately.*/ + dmaChannelEnable(uartp->dmatxnr); +} + +/** + * @brief Stops any ongoing transmission. + * @note Stopping a transmission also suppresses the transmission callbacks. + * + * @param[in] uartp pointer to the @p UARTDriver object + * + * @return The number of data frames not transmitted by the + * stopped transmit operation. + * + * @notapi + */ +size_t uart_lld_stop_send(UARTDriver *uartp) +{ + tiva_udma_table_entry_t *primary = udmaControlTable.primary; + uint16_t left; + + dmaChannelDisable(uartp->dmatxnr); + + left = ((primary[uartp->dmatxnr].chctl & UDMA_CHCTL_XFERSIZE_M) + 1) >> 4; + + return left; +} + +/** + * @brief Starts a receive operation on the UART peripheral. + * @note The buffers are organized as uint8_t arrays for data sizes below + * or equal to 8 bits else it is organized as uint16_t arrays. + * + * @param[in] uartp pointer to the @p UARTDriver object + * @param[in] n number of data frames to send + * @param[out] rxbuf the pointer to the receive buffer + * + * @notapi + */ +void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf) +{ + tiva_udma_table_entry_t *primary = udmaControlTable.primary; + + /* TODO: This assert should be moved to the dma helper driver */ + osalDbgAssert((uint32_t)rxbuf >= SRAM_BASE, "rxbuf should be in SRAM region."); + + dmaChannelDisable(uartp->dmarxnr); + + /* Configure for 8-bit transfers.*/ + primary[uartp->dmarxnr].srcendp = (void *)(uartp->uart + UART_O_DR); + primary[uartp->dmarxnr].dstendp = (volatile void *)rxbuf+n-1; + primary[uartp->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_8 | + UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_NONE | + UDMA_CHCTL_ARBSIZE_4 | + UDMA_CHCTL_XFERSIZE(n) | + UDMA_CHCTL_XFERMODE_BASIC; + + dmaChannelSingleBurst(uartp->dmarxnr); + dmaChannelPrimary(uartp->dmarxnr); + dmaChannelPriorityDefault(uartp->dmarxnr); + dmaChannelEnableRequest(uartp->dmarxnr); + + /* Enable DMA channel, transfer starts immediately.*/ + dmaChannelEnable(uartp->dmarxnr); +} + +/** + * @brief Stops any ongoing receive operation. + * @note Stopping a receive operation also suppresses the receive callbacks. + * + * @param[in] uartp pointer to the @p UARTDriver object + * + * @return The number of data frames not received by the + * stopped receive operation. + * + * @notapi + */ +size_t uart_lld_stop_receive(UARTDriver *uartp) +{ + tiva_udma_table_entry_t *primary = udmaControlTable.primary; + uint16_t left; + + dmaChannelDisable(uartp->dmatxnr); + + left = ((primary[uartp->dmatxnr].chctl & UDMA_CHCTL_XFERSIZE_M) + 1) >> 4; + + uart_enter_rx_idle_loop(uartp); + + return left; +} + +#endif /* HAL_USE_UART */ + +/** @} */ diff --git a/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.h b/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.h new file mode 100644 index 0000000..1dc743b --- /dev/null +++ b/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.h @@ -0,0 +1,471 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file UART/hal_uart_lld.h + * @brief Tiva low level UART driver header. + * + * @addtogroup UART + * @{ + */ + +#ifndef HAL_UART_LLD_H +#define HAL_UART_LLD_H + +#if HAL_USE_UART || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @name Configuration options + * @{ + */ +/** + * @brief UART driver on UART0 enable switch. + * @details If set to @p TRUE the support for UART0 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART0) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART0 FALSE +#endif + +/** + * @brief UART driver on UART1 enable switch. + * @details If set to @p TRUE the support for UART1 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART1) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART1 FALSE +#endif + +/** + * @brief UART driver on UART2 enable switch. + * @details If set to @p TRUE the support for UART2 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART2) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART2 FALSE +#endif + +/** + * @brief UART driver on UART3 enable switch. + * @details If set to @p TRUE the support for UART3 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART3) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART3 FALSE +#endif + +/** + * @brief UART driver on UART4 enable switch. + * @details If set to @p TRUE the support for UART4 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART4) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART4 FALSE +#endif + +/** + * @brief UART driver on UART5 enable switch. + * @details If set to @p TRUE the support for UART5 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART5) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART5 FALSE +#endif + +/** + * @brief UART driver on UART6 enable switch. + * @details If set to @p TRUE the support for UART6 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART6) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART6 FALSE +#endif + +/** + * @brief UART driver on UART7 enable switch. + * @details If set to @p TRUE the support for UART7 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART7) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART7 FALSE +#endif + +/** + * @brief UART0 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART0_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART0_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART1 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART1_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART1_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART2 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART2_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART2_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART3 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART3_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART3_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART4 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART4_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART4_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART5 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART5_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART5_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART6 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART6_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART6_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART7 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART7_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART7_IRQ_PRIORITY 5 +#endif +/** @} */ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +#if TIVA_UART_USE_UART0 && !TIVA_HAS_UART0 +#error "UART0 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART1 && !TIVA_HAS_UART1 +#error "UART1 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART2 && !TIVA_HAS_UART2 +#error "UART2 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART3 && !TIVA_HAS_UART3 +#error "UART3 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART4 && !TIVA_HAS_UART4 +#error "UART4 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART5 && !TIVA_HAS_UART5 +#error "UART5 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART6 && !TIVA_HAS_UART6 +#error "UART6 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART7 && !TIVA_HAS_UART7 +#error "UART7 not present in the selected device" +#endif + +#if !TIVA_UART_USE_UART0 && !TIVA_UART_USE_UART1 && !TIVA_UART_USE_UART2 && \ + !TIVA_UART_USE_UART3 && !TIVA_UART_USE_UART4 && !TIVA_UART_USE_UART5 && \ + !TIVA_UART_USE_UART6 && !TIVA_UART_USE_UART7 +#error "UART driver activated but no UART peripheral assigned" +#endif + +#if TIVA_UART_USE_UART0 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART0_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART0" +#endif + +#if TIVA_UART_USE_UART1 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART1_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART1" +#endif + +#if TIVA_UART_USE_UART2 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART2_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART2" +#endif + +#if TIVA_UART_USE_UART3 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART3_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART3" +#endif + +#if TIVA_UART_USE_UART4 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART4_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART4" +#endif + +#if TIVA_UART_USE_UART5 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART5_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART5" +#endif + +#if TIVA_UART_USE_UART6 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART6_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART6" +#endif + +#if TIVA_UART_USE_UART7 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART7_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART7" +#endif + +#if !defined(TIVA_UDMA_REQUIRED) +#define TIVA_UDMA_REQUIRED +#endif + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/** + * @brief UART driver condition flags type. + */ +typedef uint32_t uartflags_t; + +/** + * @brief Structure representing an UART driver. + */ +typedef struct UARTDriver UARTDriver; + +/** + * @brief Generic UART notification callback type. + * + * @param[in] uartp pointer to the @p UARTDriver object + */ +typedef void (*uartcb_t)(UARTDriver *uartp); + +/** + * @brief Character received UART notification callback type. + * + * @param[in] uartp pointer to the @p UARTDriver object + * @param[in] c received character + */ +typedef void (*uartccb_t)(UARTDriver *uartp, uint16_t c); + +/** + * @brief Receive error UART notification callback type. + * + * @param[in] uartp pointer to the @p UARTDriver object + * @param[in] e receive error mask + */ +typedef void (*uartecb_t)(UARTDriver *uartp, uartflags_t e); + +/** + * @brief Driver configuration structure. + * @note It could be empty on some architectures. + */ +typedef struct { + /** + * @brief End of transmission buffer callback. + */ + uartcb_t txend1_cb; + /** + * @brief Physical end of transmission callback. + */ + uartcb_t txend2_cb; + /** + * @brief Receive buffer filled callback. + */ + uartcb_t rxend_cb; + /** + * @brief Character received while out if the @p UART_RECEIVE state. + */ + uartccb_t rxchar_cb; + /** + * @brief Receive error callback. + */ + uartecb_t rxerr_cb; + /* End of the mandatory fields.*/ + /** + * @brief Bit rate. + */ + uint32_t speed; + /* End of the mandatory fields. */ + /** + * @brief Initialization value for the CTL register. + */ + uint16_t ctl; + /** + * @brief Initialization value for the LCRH register. + */ + uint8_t lcrh; + /** + * @brief Initialization value for the IFLS register. + */ + uint8_t ifls; + /** + * @brief Initialization value for the CC register. + */ + uint8_t cc; +} UARTConfig; + +/** + * @brief Structure representing an UART driver. + */ +struct UARTDriver { + /** + * @brief Driver state. + */ + uartstate_t state; + /** + * @brief Transmitter state. + */ + uarttxstate_t txstate; + /** + * @brief Receiver state. + */ + uartrxstate_t rxstate; + /** + * @brief Current configuration data. + */ + const UARTConfig *config; +#if (UART_USE_WAIT == TRUE) || defined(__DOXYGEN__) + /** + * @brief Synchronization flag for transmit operations. + */ + bool early; + /** + * @brief Waiting thread on RX. + */ + thread_reference_t threadrx; + /** + * @brief Waiting thread on TX. + */ + thread_reference_t threadtx; +#endif /* UART_USE_WAIT */ +#if (UART_USE_MUTUAL_EXCLUSION == TRUE) || defined(__DOXYGEN__) + /** + * @brief Mutex protecting the peripheral. + */ + mutex_t mutex; +#endif /* UART_USE_MUTUAL_EXCLUSION */ +#if defined(UART_DRIVER_EXT_FIELDS) + UART_DRIVER_EXT_FIELDS +#endif + /* End of the mandatory fields.*/ + /** + * @brief Pointer to the UART registers block. + */ + uint32_t uart; + /** + * @brief Receive DMA channel number. + */ + uint8_t dmarxnr; + /** + * @brief Transmit DMA channel number. + */ + uint8_t dmatxnr; + /** + * @brief Receive DMA channel map. + */ + uint8_t rxchnmap; + /** + * @brief Transmit DMA channel map. + */ + uint8_t txchnmap; + /** + * @brief Default receive buffer while into @p UART_RX_IDLE state. + */ + volatile uint16_t rxbuf; +}; + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#if TIVA_UART_USE_UART0 && !defined(__DOXYGEN__) +extern UARTDriver UARTD1; +#endif + +#if TIVA_UART_USE_UART1 && !defined(__DOXYGEN__) +extern UARTDriver UARTD2; +#endif + +#if TIVA_UART_USE_UART2 && !defined(__DOXYGEN__) +extern UARTDriver UARTD3; +#endif + +#if TIVA_UART_USE_UART3 && !defined(__DOXYGEN__) +extern UARTDriver UARTD4; +#endif + +#if TIVA_UART_USE_UART4 && !defined(__DOXYGEN__) +extern UARTDriver UARTD5; +#endif + +#if TIVA_UART_USE_UART5 && !defined(__DOXYGEN__) +extern UARTDriver UARTD6; +#endif + +#if TIVA_UART_USE_UART6 && !defined(__DOXYGEN__) +extern UARTDriver UARTD7; +#endif + +#if TIVA_UART_USE_UART7 && !defined(__DOXYGEN__) +extern UARTDriver UARTD8; +#endif + +#ifdef __cplusplus +extern "C" { +#endif + void uart_lld_init(void); + void uart_lld_start(UARTDriver *uartp); + void uart_lld_stop(UARTDriver *uartp); + void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf); + size_t uart_lld_stop_send(UARTDriver *uartp); + void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf); + size_t uart_lld_stop_receive(UARTDriver *uartp); +#ifdef __cplusplus +} +#endif + +#endif /* HAL_USE_UART */ + +#endif /* HAL_UART_LLD_H */ + +/** @} */ |