diff options
Diffstat (limited to 'os/hal/ports')
138 files changed, 36297 insertions, 16390 deletions
diff --git a/os/hal/ports/KINETIS/K20x/hal_lld.c b/os/hal/ports/KINETIS/K20x/hal_lld.c index e6eeed8..594f7af 100644 --- a/os/hal/ports/KINETIS/K20x/hal_lld.c +++ b/os/hal/ports/KINETIS/K20x/hal_lld.c @@ -148,11 +148,10 @@ void k20x_clock_init(void) { * frequency, which would required other registers to be modified.
*/
/* Enable OSC, low power mode */
- MCG->C2 = MCG_C2_LOCRE0 | MCG_C2_EREFS0;
if (KINETIS_XTAL_FREQUENCY > 8000000UL)
- MCG->C2 |= MCG_C2_RANGE0(2);
+ MCG->C2 = MCG_C2_LOCRE0 | MCG_C2_EREFS0 | MCG_C2_RANGE0(2);
else
- MCG->C2 |= MCG_C2_RANGE0(1);
+ MCG->C2 = MCG_C2_LOCRE0 | MCG_C2_EREFS0 | MCG_C2_RANGE0(1);
frdiv = 7;
ratio = KINETIS_XTAL_FREQUENCY / 31250UL;
diff --git a/os/hal/ports/KINETIS/LLD/hal_i2c_lld.c b/os/hal/ports/KINETIS/LLD/hal_i2c_lld.c index c6b3d11..a005c32 100644 --- a/os/hal/ports/KINETIS/LLD/hal_i2c_lld.c +++ b/os/hal/ports/KINETIS/LLD/hal_i2c_lld.c @@ -442,7 +442,7 @@ static inline msg_t _i2c_txrx_timeout(I2CDriver *i2cp, i2caddr_t addr, /* wait until the bus is released */
/* Calculating the time window for the timeout on the busy bus condition.*/
start = osalOsGetSystemTimeX();
- end = start + OSAL_MS2ST(KINETIS_I2C_BUSY_TIMEOUT);
+ end = start + OSAL_TIME_MS2I(KINETIS_I2C_BUSY_TIMEOUT);
while(true) {
osalSysLock();
diff --git a/os/hal/ports/KINETIS/LLD/hal_sdc_lld.c b/os/hal/ports/KINETIS/LLD/hal_sdc_lld.c new file mode 100644 index 0000000..1b19a90 --- /dev/null +++ b/os/hal/ports/KINETIS/LLD/hal_sdc_lld.c @@ -0,0 +1,977 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ Copyright (C) 2017..2018 Wim Lewis
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_sdc_lld.c
+ * @brief Kinetis SDC subsystem low level driver.
+ *
+ * This driver provides a single SDC driver based on the Kinetis
+ * "Secured Digital Host Controller (SDHC)" peripheral.
+ *
+ * In order to use this driver, other peripherals must also be configured:
+ *
+ * The MPU must either be disabled (CESR=0), or it must be configured
+ * to allow the SDHC peripheral DMA access to any data buffers (read
+ * or write).
+ *
+ * The SDHC signals must be routed to the desired pins, and pullups/pulldowns
+ * configured. + *
+ * @addtogroup SDC
+ * @{
+ */
+
+#include "hal.h"
+
+#if (HAL_USE_SDC == TRUE) || defined(__DOXYGEN__)
+
+#include "hal_mmcsd.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/* We configure the SDHC block to use the system clock */
+#define KINETIS_SDHC_PERIPHERAL_FREQUENCY KINETIS_SYSCLK_FREQUENCY
+
+#ifndef KINETIS_SDHC_PRIORITY
+#define KINETIS_SDHC_PRIORITY 12 /* TODO? Default IRQ priority for SDHC */
+#endif
+
+/* The DTOC value (data timeout counter) controls how long the SDHC
+ will wait for a data transfer before indicating a timeout to
+ us. The card can tell us how long that should be, but various SDHC
+ documentation suggests that we should always allow around 500 msec
+ even if the card says it will finish sooner. This only comes into
+ play if there's a malfunction or something, so it's not critical to
+ get it exactly right.
+
+ It controls the ratio between the SDCLK frequency and the
+ timeout, so we have a different DTOCV for each bus clock
+ frequency.
+*/
+#define DTOCV_300ms_400kHz 4 /* 4 -> 2^17 -> 328 msec */
+#define DTOCV_700ms_25MHz 11 /* 11 -> 2^24 -> 671 msec */
+#define DTOCV_700ms_50MHz 12 /* 12 -> 2^25 -> 671 msec */
+
+#if 0
+#define TRACE(t, val) chDbgWriteTrace ((void *)t, (void *)(uintptr_t)(val))
+#define TRACEI(t, val) chDbgWriteTraceI((void *)t, (void *)(uintptr_t)(val))
+#else
+#define TRACE(t, val)
+#define TRACEI(t, val)
+#endif
+
+#define DIV_RND_UP(a, b) ( ((a)+(b)-1) / (b) )
+
+/* Error bits from the SD / MMC Card Status response word. */
+/* TODO: These really belong in a HLD, not here. */
+#define MMC_ERR_OUT_OF_RANGE (1U << 31)
+#define MMC_ERR_ADDRESS (1U << 30)
+#define MMC_ERR_BLOCK_LEN (1U << 29)
+#define MMC_ERR_ERASE_SEQ (1U << 28)
+#define MMC_ERR_ERASE_PARAM (1U << 27)
+#define MMC_ERR_WP (1U << 26)
+#define MMC_ERR_CARD_IS_LOCKED (1U << 25)
+#define MMC_ERR_LOCK_UNLOCK_FAILED (1U << 24)
+#define MMC_ERR_COM_CRC_ERROR (1U << 23)
+#define MMC_ERR_ILLEGAL_COMMAND (1U << 22)
+#define MMC_ERR_CARD_ECC_FAILED (1U << 21)
+#define MMC_ERR_CARD_CONTROLLER (1U << 20)
+#define MMC_ERR_ERROR (1U << 19)
+#define MMC_ERR_CSD_OVERWRITE (1U << 16)
+#define MMC_ERR_AKE_SEQ (1U << 3)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief SDCD1 driver identifier.
+ */
+#if (PLATFORM_SDC_USE_SDC1 == TRUE) || defined(__DOXYGEN__)
+SDCDriver SDCD1;
+#else
+#error HAL_USE_SDC is true but PLATFORM_SDC_USE_SDC1 is false
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static void recover_after_botched_transfer(SDCDriver *);
+static msg_t wait_interrupt(SDCDriver *, uint32_t);
+static bool sdc_lld_transfer(SDCDriver *, uint32_t, uintptr_t, uint32_t, uint32_t);
+
+/**
+ * Compute the SDCLKFS and DVS values for a given SDCLK divisor.
+ *
+ * Note that in the current code, this function is always called with
+ * a constant argument (there are only a handful of valid SDCLK
+ * frequencies), and so GCC computes the results at compile time and
+ * does not actually emit this function into the output at all unless
+ * you're compiling with optimizations turned off.
+ *
+ * However if someone compiles with a KINETIS_SDHC_PERIPHERAL_FREQUENCY
+ * that is not a compile-time constant, this function would get emitted.
+ */
+static uint32_t divisor_settings(unsigned divisor)
+{
+ /* First, handle all the special cases */
+ if (divisor <= 1) {
+ /* Pass through */
+ return SDHC_SYSCTL_SDCLKFS(0) | SDHC_SYSCTL_DVS(0);
+ }
+ if (divisor <= 16 && (divisor & 0x01)) {
+ /* Disable the prescaler, just use the divider. */
+ return SDHC_SYSCTL_SDCLKFS(0) | SDHC_SYSCTL_DVS(divisor - 1);
+ }
+ if (divisor <= 32 && !(divisor & 0x01)) {
+ /* Prescale by 2, but do the rest with the divider */
+ return SDHC_SYSCTL_SDCLKFS(0x01) | SDHC_SYSCTL_DVS((divisor >> 1) - 1);
+ }
+ if (divisor >= 0x1000) {
+ /* It's not possible to divide by more than 2^12. If we're asked to,
+ just do the best we can. */
+ return SDHC_SYSCTL_SDCLKFS(0x80) | SDHC_SYSCTL_DVS(0xF);
+ }
+
+ /* The bit position in SDCLKFS provides a power-of-two prescale
+ factor, and the four bits in DVS allow division by up to 16
+ (division by DVS+1). We want to approximate `divisor` using these
+ terms, but we want to round up --- it's OK to run the card a
+ little bit too slow, but not OK to run it a little bit too
+ fast. */
+
+ unsigned shift = (8 * sizeof(unsigned int) - 4) - __builtin_clz(divisor);
+
+ /* Shift the divisor value right so that it only occupies the four
+ lowest bits. Subtract one because that's how the DVS circuit
+ works. Add one if we shifted any 1-bits off the bottom, so that
+ we always round up. */
+ unsigned dvs = (divisor >> shift) - ((divisor & ((1 << shift)-1))? 0 : 1);
+
+ return SDHC_SYSCTL_SDCLKFS(1 << (shift-1)) | SDHC_SYSCTL_DVS(dvs);
+}
+
+/**
+ * @brief Enable the SDHC clock when stable.
+ *
+ * Waits for the clock divider in the SDHC block to stabilize, then
+ * enables the SD clock.
+ */
+static void enable_clock_when_stable(uint32_t new_sysctl)
+{
+ SDHC->SYSCTL = new_sysctl;
+
+ /* Wait for clock divider to stabilize */
+ while(!(SDHC->PRSSTAT & SDHC_PRSSTAT_SDSTB)) {
+ osalThreadSleepMilliseconds(1);
+ }
+
+ /* Restart the clock */
+ SDHC->SYSCTL = new_sysctl | SDHC_SYSCTL_SDCLKEN;
+}
+
+/**
+ * Translate error bits from a CMD transaction to the HAL's error flag set.
+ */
+static sdcflags_t translate_cmd_error(uint32_t status) {
+ /* Translate the failure into the flags understood by the top half */
+
+ sdcflags_t errors = 0;
+
+ if (status & SDHC_IRQSTAT_CTOE || !(status & SDHC_IRQSTAT_CC)) {
+ errors |= SDC_COMMAND_TIMEOUT;
+ }
+ if (status & SDHC_IRQSTAT_CCE) {
+ errors |= SDC_CMD_CRC_ERROR;
+ }
+
+ /* If CTOE and CCE are both set, this indicates that the Kinetis
+ SDHC peripheral has detected a CMD line conflict in a
+ multi-master scenario. There's no specific code for that, so just
+ pass it through as a combined timeout+CRC failure. */
+
+ /* Translate any other framing and protocol errors into CRC errors. */
+ if (status & ~(SDHC_IRQSTAT_CCE|SDHC_IRQSTAT_CTOE|SDHC_IRQSTAT_CC)) {
+ errors |= SDC_CMD_CRC_ERROR;
+ }
+
+ return errors;
+}
+
+/**
+ * Translate error bits from a card's R1 response word into the HAL's
+ * error flag set.
+ *
+ * This function should probably be in the HLD, not here.
+ */
+static sdcflags_t translate_mmcsd_error(uint32_t cardstatus) {
+ sdcflags_t errors = 0;
+
+ cardstatus &= MMCSD_R1_ERROR_MASK;
+
+ if (cardstatus & MMC_ERR_COM_CRC_ERROR)
+ errors |= SDC_CMD_CRC_ERROR;
+
+ if (cardstatus & MMC_ERR_CARD_ECC_FAILED)
+ errors |= SDC_DATA_CRC_ERROR;
+
+ /* TODO: Extend the HLD error codes at least enough to distinguish
+ between invalid command/parameter errors (card is OK, but
+ retrying w/o change won't help) and other errors */
+ if (cardstatus & ~(MMC_ERR_COM_CRC_ERROR|MMC_ERR_CARD_ECC_FAILED))
+ errors |= SDC_UNHANDLED_ERROR;
+
+ return errors;
+}
+
+/**
+ * @brief Perform one CMD transaction on the SD bus.
+ */
+static bool send_and_wait_cmd(SDCDriver *sdcp, uint32_t cmd) {
+ /* SDCLKEN (CMD clock enabled) should be true;
+ * SDSTB (clock stable) should be true;
+ * CIHB (command inhibit / busy) should be false */
+ osalDbgAssert((SDHC->PRSSTAT & (SDHC_PRSSTAT_SDSTB|SDHC_PRSSTAT_CIHB)) == SDHC_PRSSTAT_SDSTB, "Not in expected state");
+ osalDbgAssert(SDHC->SYSCTL & SDHC_SYSCTL_SDCLKEN, "Clock disabled");
+ osalDbgCheck((cmd & SDHC_XFERTYP_DPSEL) == 0);
+ osalDbgCheck((SDHC->IRQSTAT & (SDHC_IRQSTAT_CIE | SDHC_IRQSTAT_CEBE | SDHC_IRQSTAT_CCE |
+ SDHC_IRQSTAT_CTOE | SDHC_IRQSTAT_CC)) == 0);
+
+ /* This initiates the CMD transaction */
+ TRACE(1, cmd);
+ SDHC->XFERTYP = cmd;
+
+ uint32_t events =
+ SDHC_IRQSTAT_CIE | SDHC_IRQSTAT_CEBE | SDHC_IRQSTAT_CCE |
+ SDHC_IRQSTAT_CTOE | /* SDHC_IRQSTAT_CRM | */ SDHC_IRQSTAT_CC;
+ wait_interrupt(sdcp, SDHC_IRQSTAT_CTOE | SDHC_IRQSTAT_CC);
+ uint32_t status = SDHC->IRQSTAT & events;
+
+ /* These bits are write-1-to-clear (w1c) */
+ SDHC->IRQSTAT = status;
+
+ /* In the normal case, the CC (command complete) bit is set but none
+ of the others are */
+ if (status == SDHC_IRQSTAT_CC)
+ return HAL_SUCCESS;
+
+ /* Translate the failure into the flags understood by the top half */
+ sdcp->errors |= translate_cmd_error(status);
+
+ TRACE(9, SDHC->PRSSTAT);
+
+ /* Issue a reset to the CMD portion of the SDHC peripheral to clear the
+ error bits and enable subsequent commands */
+ SDHC->SYSCTL |= SDHC_SYSCTL_RSTC;
+
+ return HAL_FAILED;
+}
+
+/**
+ * @brief Perform one data transaction on the SD bus.
+ */
+static bool send_and_wait_transfer(SDCDriver *sdcp, uint32_t cmd) {
+
+ osalDbgCheck(cmd & SDHC_XFERTYP_DPSEL);
+ osalDbgCheck(cmd & SDHC_XFERTYP_DMAEN);
+
+ const uint32_t cmd_end_bits =
+ SDHC_IRQSTAT_CIE | SDHC_IRQSTAT_CEBE | SDHC_IRQSTAT_CCE |
+ SDHC_IRQSTAT_CTOE | /* SDHC_IRQSTAT_CRM | */ SDHC_IRQSTAT_CC;
+
+ const uint32_t transfer_end_bits =
+ SDHC_IRQSTAT_DMAE | SDHC_IRQSTAT_AC12E | SDHC_IRQSTAT_DEBE |
+ SDHC_IRQSTAT_DCE | SDHC_IRQSTAT_DTOE | SDHC_IRQSTAT_TC;
+
+ TRACE(3, cmd);
+
+ osalSysLock();
+ osalDbgCheck(sdcp->thread == NULL);
+
+ /* Clear anything pending from an earlier transfer */
+ SDHC->IRQSTAT = cmd_end_bits | transfer_end_bits | SDHC_IRQSTAT_DINT;
+
+ /* Enable interrupts on completions or failures */
+ uint32_t old_staten = SDHC->IRQSTATEN;
+ SDHC->IRQSTATEN = (old_staten & ~(SDHC_IRQSTAT_BRR|SDHC_IRQSTAT_BWR)) | (cmd_end_bits | transfer_end_bits | SDHC_IRQSTAT_DINT);
+ SDHC->IRQSIGEN = SDHC_IRQSTAT_CTOE | SDHC_IRQSTAT_CC;
+
+ /* Start the transfer */
+ SDHC->XFERTYP = cmd;
+
+ /* Await an interrupt */
+ osalThreadSuspendS(&sdcp->thread);
+ osalSysUnlock();
+
+ /* Retrieve the flags and clear them */
+ uint32_t cmdstat = SDHC->IRQSTAT & cmd_end_bits;
+ SDHC->IRQSTAT = cmdstat;
+ TRACE(2, cmdstat);
+
+ /* If the command failed, the transfer won't happen */
+ if (cmdstat != SDHC_IRQSTAT_CC) {
+ /* The command couldn't be sent, or wasn't acknowledged */
+ sdcp->errors |= translate_cmd_error(cmdstat);
+
+ /* Clear the error status */
+ SDHC->SYSCTL |= SDHC_SYSCTL_RSTC;
+
+ if (cmdstat == (SDHC_IRQSTAT_CCE|SDHC_IRQSTAT_CTOE)) {
+ /* A CMD-line conflict is unlikely, but doesn't require further recovery */
+ } else {
+ /* For most error situations, we don't know whether the command
+ failed to send or we got line noise while receiving. Make sure
+ we're in a sane state by resetting the connection. */
+ recover_after_botched_transfer(sdcp);
+ }
+
+ return HAL_FAILED;
+ }
+
+ uint32_t cmdresp = SDHC->CMDRSP[0];
+ TRACE(11, cmdresp);
+ if (cmdresp & MMCSD_R1_ERROR_MASK) {
+ /* The command was sent, and the card responded with an error indication */
+ sdcp->errors |= translate_mmcsd_error(cmdresp);
+ return HAL_FAILED;
+ }
+
+ /* Check for end of data transfer phase */
+ uint32_t datastat;
+ for (;;) {
+ datastat = SDHC->IRQSTAT & (transfer_end_bits | SDHC_IRQSTAT_DINT);
+ if (datastat & transfer_end_bits)
+ break;
+ wait_interrupt(sdcp, transfer_end_bits);
+ }
+ TRACE(6, datastat);
+ SDHC->IRQSTAT = datastat;
+
+ /* Handle data transfer errors */
+ if ((datastat & ~(SDHC_IRQSTAT_DINT)) != SDHC_IRQSTAT_TC) {
+ bool should_cancel = false;
+
+ /* Data phase errors */
+ if (datastat & (SDHC_IRQSTAT_DCE|SDHC_IRQSTAT_DEBE)) {
+ sdcp->errors |= SDC_DATA_CRC_ERROR;
+ should_cancel = true;
+ }
+ if (datastat & SDHC_IRQSTAT_DTOE) {
+ sdcp->errors |= SDC_DATA_TIMEOUT;
+ should_cancel = true;
+ }
+
+ /* Internal DMA error */
+ if (datastat & SDHC_IRQSTAT_DMAE) {
+ sdcp->errors |= SDC_UNHANDLED_ERROR;
+ if (!(datastat & SDHC_IRQSTAT_TC))
+ should_cancel = true;
+ }
+
+ if (datastat & SDHC_IRQSTAT_AC12E) {
+ uint32_t cmd12error = SDHC->AC12ERR;
+
+ /* We don't know if CMD12 was successfully executed */
+ should_cancel = true;
+
+ if (cmd12error & SDHC_AC12ERR_AC12NE) {
+ sdcp->errors |= SDC_UNHANDLED_ERROR;
+ } else {
+ if (cmd12error & SDHC_AC12ERR_AC12TOE)
+ sdcp->errors |= SDC_COMMAND_TIMEOUT;
+ if (cmd12error & (SDHC_AC12ERR_AC12CE|SDHC_AC12ERR_AC12EBE))
+ sdcp->errors |= SDC_CMD_CRC_ERROR;
+ }
+ }
+
+ if (should_cancel) {
+ recover_after_botched_transfer(sdcp);
+ }
+
+ return HAL_FAILED;
+ }
+
+ /* For a read transfer, make sure the DMA has finished transferring
+ * to host memory. (For a write transfer, the DMA necessarily finishes
+ * before the transfer does, so we don't need to wait for it
+ * specially.) */
+ if (!(datastat & SDHC_IRQSTAT_DINT)) {
+ for(;;) {
+ datastat = SDHC->IRQSTAT & (SDHC_IRQSTAT_DINT|SDHC_IRQSTAT_DMAE);
+ if (datastat) {
+ SDHC->IRQSTAT = datastat;
+ TRACE(7, datastat);
+ break;
+ }
+ /* ...?? */
+ }
+ }
+
+ SDHC->IRQSTATEN = old_staten;
+
+ return HAL_SUCCESS;
+}
+
+/**
+ * @brief Wait for an interrupt from the SDHC peripheral.
+ *
+ * @param[in] mask Bits to enable in IRQSIGEN.
+ *
+ * @return MSG_OK
+ */
+static msg_t wait_interrupt(SDCDriver *sdcp, uint32_t mask) {
+ osalSysLock();
+ SDHC->IRQSIGEN = mask;
+ msg_t wakeup = osalThreadSuspendS(&sdcp->thread);
+ osalSysUnlock();
+ return wakeup;
+}
+
+static void recover_after_botched_transfer(SDCDriver *sdcp) {
+
+ /* Query the card state */
+ uint32_t cardstatus;
+ if (sdc_lld_send_cmd_short_crc(sdcp,
+ MMCSD_CMD_SEND_STATUS,
+ sdcp->rca, &cardstatus) == HAL_SUCCESS) {
+ sdcp->errors |= translate_mmcsd_error(cardstatus);
+ uint32_t state = MMCSD_R1_STS(cardstatus);
+ if (state == MMCSD_STS_DATA) {
+
+ /* Send a CMD12 to make sure the card isn't still transferring anything */
+ SDHC->CMDARG = 0;
+ send_and_wait_cmd(sdcp,
+ SDHC_XFERTYP_CMDINX(MMCSD_CMD_STOP_TRANSMISSION) |
+ SDHC_XFERTYP_CMDTYP_ABORT |
+ /* TODO: Should we set CICEN and CCCEN here? */
+ SDHC_XFERTYP_CICEN | SDHC_XFERTYP_CCCEN |
+ SDHC_XFERTYP_RSPTYP_48b);
+ }
+ }
+
+ /* And reset the data block of the SDHC peripheral */
+ SDHC->SYSCTL |= SDHC_SYSCTL_RSTD;
+}
+
+/**
+ * @brief Perform one data transfer command
+ *
+ * Sends a command to the card and waits for the corresponding data transfer
+ * (either a read or write) to complete.
+ */
+static bool sdc_lld_transfer(SDCDriver *sdcp, uint32_t startblk,
+ uintptr_t buf, uint32_t n,
+ uint32_t cmdx) {
+
+ osalDbgCheck(n > 0);
+ osalDbgCheck((buf & 0x03) == 0); /* Must be 32-bit aligned */
+
+ osalDbgAssert((SDHC->PRSSTAT & (SDHC_PRSSTAT_DLA|SDHC_PRSSTAT_CDIHB|SDHC_PRSSTAT_CIHB)) == 0,
+ "SDHC interface not ready");
+
+ /* We always operate in terms of 512-byte blocks; the upper-layer
+ driver doesn't change the block size. The SDHC spec suggests that
+ only low-capacity cards support block sizes other than 512 bytes
+ anyway (SDHC "Physical Layer Simplified Specification" ver 6.0) */
+
+ if (sdcp->cardmode & SDC_MODE_HIGH_CAPACITY) {
+ SDHC->CMDARG = startblk;
+ } else {
+ SDHC->CMDARG = startblk * MMCSD_BLOCK_SIZE;
+ }
+
+ /* Store the DMA start address */
+ SDHC->DSADDR = buf;
+
+ uint32_t xfer;
+ /* For data transfers, we need to set some extra bits in XFERTYP according to the
+ transfer we're starting:
+ DPSEL -> enable data transfer
+ DTDSEL -> 1 for a read (card-to-host) transfer
+ MSBSEL, BCEN -> multiple block transfer using BLKATTR_BLKCNT
+ AC12EN -> Automatically issue MMCSD_CMD_STOP_TRANSMISSION at end of transfer
+
+ Setting BLKCOUNT to 1 seems to be necessary even if MSBSEL+BCEN
+ is not set, despite the datasheet suggesting otherwise. I'm not
+ sure if this is a silicon bug or if I'm misunderstanding the
+ datasheet.
+ */
+ SDHC->BLKATTR =
+ SDHC_BLKATTR_BLKCNT(n) |
+ SDHC_BLKATTR_BLKSIZE(MMCSD_BLOCK_SIZE);
+ if (n == 1) {
+ xfer =
+ cmdx |
+ SDHC_XFERTYP_CMDTYP_NORMAL |
+ SDHC_XFERTYP_CICEN | SDHC_XFERTYP_CCCEN |
+ SDHC_XFERTYP_RSPTYP_48b |
+ SDHC_XFERTYP_DPSEL | SDHC_XFERTYP_DMAEN;
+ } else {
+ xfer =
+ cmdx |
+ SDHC_XFERTYP_CMDTYP_NORMAL |
+ SDHC_XFERTYP_CICEN | SDHC_XFERTYP_CCCEN |
+ SDHC_XFERTYP_RSPTYP_48b |
+ SDHC_XFERTYP_MSBSEL | SDHC_XFERTYP_BCEN | SDHC_XFERTYP_AC12EN |
+ SDHC_XFERTYP_DPSEL | SDHC_XFERTYP_DMAEN;
+ }
+
+ return send_and_wait_transfer(sdcp, xfer);
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if (PLATFORM_SDC_USE_SDC1 == TRUE) || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(KINETIS_SDHC_IRQ_VECTOR) {
+ OSAL_IRQ_PROLOGUE();
+ osalSysLockFromISR();
+
+ TRACEI(4, SDHC->IRQSTAT);
+
+ /* We disable the interrupts, and wake up the usermode task to read
+ * the flags from IRQSTAT.
+ */
+ SDHC->IRQSIGEN = 0;
+
+ osalThreadResumeI(&SDCD1.thread, MSG_OK);
+
+ osalSysUnlockFromISR();
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level SDC driver initialization.
+ *
+ * @notapi
+ */
+void sdc_lld_init(void) {
+#if PLATFORM_SDC_USE_SDC1 == TRUE
+ sdcObjectInit(&SDCD1);
+#endif
+}
+
+
+/**
+ * @brief Configures and activates the SDC peripheral.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ *
+ * @notapi
+ */
+void sdc_lld_start(SDCDriver *sdcp) {
+
+ if (sdcp->state == BLK_STOP) {
+ SIM->SOPT2 =
+ (SIM->SOPT2 & ~SIM_SOPT2_SDHCSRC_MASK) |
+ SIM_SOPT2_SDHCSRC(0); /* SDHC clock source 0: Core/system clock. */
+ SIM->SCGC3 |= SIM_SCGC3_SDHC; /* Enable clock to SDHC peripheral */
+
+ /* Reset the SDHC block */
+ SDHC->SYSCTL |= SDHC_SYSCTL_RSTA;
+ while(SDHC->SYSCTL & SDHC_SYSCTL_RSTA) {
+ osalThreadSleepMilliseconds(1);
+ }
+
+ SDHC->IRQSIGEN = 0;
+ nvicEnableVector(SDHC_IRQn, KINETIS_SDHC_PRIORITY);
+ }
+}
+
+/**
+ * @brief Deactivates the SDC peripheral.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ *
+ * @notapi
+ */
+void sdc_lld_stop(SDCDriver *sdcp) {
+
+ if (sdcp->state != BLK_STOP) {
+ /* TODO: Should we perform a reset (RSTA) before putting the
+ peripheral to sleep? */
+
+ /* Disable the card clock */
+ SDHC->SYSCTL &= ~( SDHC_SYSCTL_SDCLKEN );
+
+ /* Turn off interrupts */
+ nvicDisableVector(SDHC_IRQn);
+ SDHC->IRQSIGEN = 0;
+ SDHC->IRQSTATEN &= ~( SDHC_IRQSTATEN_CINTSEN |
+ SDHC_IRQSTATEN_CINSEN |
+ SDHC_IRQSTATEN_CRMSEN );
+
+ /* Disable the clock to the SDHC peripheral block */
+ SIM->SCGC3 &= ~( SIM_SCGC3_SDHC );
+ }
+}
+
+/**
+ * @brief Starts the SDIO clock and sets it to init mode (400kHz or less).
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ *
+ * @notapi
+ */
+void sdc_lld_start_clk(SDCDriver *sdcp) {
+
+ (void)sdcp;
+
+ /* Stop the card clock (it should already be stopped) */
+ SDHC->SYSCTL &= ~( SDHC_SYSCTL_SDCLKEN );
+
+ /* Change the divisor and DTOCV for a 400kHz card closk */
+ uint32_t sysctl =
+ SDHC_SYSCTL_DTOCV(DTOCV_300ms_400kHz) |
+ divisor_settings(DIV_RND_UP(KINETIS_SDHC_PERIPHERAL_FREQUENCY, 400000));
+
+ /* Restart the clock */
+ enable_clock_when_stable(sysctl);
+
+ /* Reset any protocol machinery; this also runs the clock for 80
+ cycles without any data bits to help initalize the card's state
+ (the Kinetis peripheral docs say that this is required after card
+ insertion or power-on, but the abridged SDHC specifications I
+ have don't seem to mention it) */
+ SDHC->SYSCTL |= SDHC_SYSCTL_INITA;
+
+ TRACE(9, SDHC->PRSSTAT);
+}
+
+/**
+ * @brief Sets the SDIO clock to data mode (25MHz or less).
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] clk the clock mode
+ *
+ * @notapi
+ */
+void sdc_lld_set_data_clk(SDCDriver *sdcp, sdcbusclk_t clk) {
+
+ (void)sdcp;
+
+ /* Stop the card clock */
+ SDHC->SYSCTL &= ~( SDHC_SYSCTL_SDCLKEN );
+
+ /* Change the divisor */
+ uint32_t ctl;
+ switch (clk) {
+ default:
+ case SDC_CLK_25MHz:
+ ctl =
+ SDHC_SYSCTL_DTOCV(DTOCV_700ms_25MHz) |
+ divisor_settings(DIV_RND_UP(KINETIS_SDHC_PERIPHERAL_FREQUENCY, 25000000));
+ break;
+ case SDC_CLK_50MHz:
+ ctl =
+ SDHC_SYSCTL_DTOCV(DTOCV_700ms_50MHz) |
+ divisor_settings(DIV_RND_UP(KINETIS_SDHC_PERIPHERAL_FREQUENCY, 50000000));
+ break;
+ }
+
+ /* Restart the clock */
+ enable_clock_when_stable(ctl);
+}
+
+/**
+ * @brief Stops the SDIO clock.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ *
+ * @notapi
+ */
+void sdc_lld_stop_clk(SDCDriver *sdcp) {
+ (void)sdcp;
+ SDHC->SYSCTL &= ~( SDHC_SYSCTL_SDCLKEN );
+}
+
+/**
+ * @brief Switches the bus to 4 bit or 8 bit mode.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] mode bus mode
+ *
+ * @notapi
+ */
+void sdc_lld_set_bus_mode(SDCDriver *sdcp, sdcbusmode_t mode) {
+ (void)sdcp;
+ uint32_t proctl = SDHC->PROCTL & ~( SDHC_PROCTL_DTW_MASK );
+
+ switch (mode) {
+ case SDC_MODE_1BIT:
+ proctl |= SDHC_PROCTL_DTW_1BIT;
+ break;
+ case SDC_MODE_4BIT:
+ proctl |= SDHC_PROCTL_DTW_4BIT;
+ break;
+ case SDC_MODE_8BIT:
+ proctl |= SDHC_PROCTL_DTW_8BIT;
+ break;
+ default:
+ osalDbgAssert(false, "invalid bus mode");
+ break;
+ }
+
+ SDHC->PROCTL = proctl;
+}
+
+/**
+ * @brief Sends an SDIO command with no response expected.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] cmd card command
+ * @param[in] arg command argument
+ *
+ * @notapi
+ */
+void sdc_lld_send_cmd_none(SDCDriver *sdcp, uint8_t cmd, uint32_t arg) {
+ SDHC->CMDARG = arg;
+ uint32_t xfer =
+ SDHC_XFERTYP_CMDINX(cmd) |
+ SDHC_XFERTYP_CMDTYP_NORMAL |
+ /* DPSEL=0, CICEN=0, CCCEN=0 */
+ SDHC_XFERTYP_RSPTYP_NONE;
+
+ send_and_wait_cmd(sdcp, xfer);
+}
+
+/**
+ * @brief Sends an SDIO command with a short response expected.
+ * @note The CRC is not verified.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] cmd card command
+ * @param[in] arg command argument
+ * @param[out] resp pointer to the response buffer (one word)
+ *
+ * @return The operation status.
+ * @retval HAL_SUCCESS operation succeeded.
+ * @retval HAL_FAILED operation failed.
+ *
+ * @notapi
+ */
+bool sdc_lld_send_cmd_short(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
+ uint32_t *resp) {
+ SDHC->CMDARG = arg;
+ uint32_t xfer =
+ SDHC_XFERTYP_CMDINX(cmd) |
+ SDHC_XFERTYP_CMDTYP_NORMAL |
+ /* DPSEL=0, CICEN=0, CCCEN=0 */
+ SDHC_XFERTYP_RSPTYP_48;
+
+ bool waited = send_and_wait_cmd(sdcp, xfer);
+
+ *resp = SDHC->CMDRSP[0];
+
+ return waited;
+}
+
+/**
+ * @brief Sends an SDIO command with a short response expected and CRC.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] cmd card command
+ * @param[in] arg command argument
+ * @param[out] resp pointer to the response buffer (one word)
+ *
+ * @return The operation status.
+ * @retval HAL_SUCCESS operation succeeded.
+ * @retval HAL_FAILED operation failed.
+ *
+ * @notapi
+ */
+bool sdc_lld_send_cmd_short_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
+ uint32_t *resp) {
+ SDHC->CMDARG = arg;
+ uint32_t xfer =
+ SDHC_XFERTYP_CMDINX(cmd) |
+ SDHC_XFERTYP_CMDTYP_NORMAL |
+ /* DPSEL=0, CICEN=1, CCCEN=1 */
+ SDHC_XFERTYP_CICEN | SDHC_XFERTYP_CCCEN |
+ SDHC_XFERTYP_RSPTYP_48;
+
+ bool waited = send_and_wait_cmd(sdcp, xfer);
+
+ *resp = SDHC->CMDRSP[0];
+ TRACE(11, *resp);
+
+ return waited;
+}
+
+/**
+ * @brief Sends an SDIO command with a long response expected and CRC.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] cmd card command
+ * @param[in] arg command argument
+ * @param[out] resp pointer to the response buffer (four words)
+ *
+ * @return The operation status.
+ * @retval HAL_SUCCESS operation succeeded.
+ * @retval HAL_FAILED operation failed.
+ *
+ * @notapi
+ */
+bool sdc_lld_send_cmd_long_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
+ uint32_t *resp) {
+
+ /* In response format R2 (the 136-bit or "long" response) the CRC7
+ field is valid, but the command index field is set to all 1s, so
+ we need to disable the command index check function (CICEN=0). */
+
+ SDHC->CMDARG = arg;
+ uint32_t xfer =
+ SDHC_XFERTYP_CMDINX(cmd) |
+ SDHC_XFERTYP_CMDTYP_NORMAL |
+ /* DPSEL=0, CICEN=0, CCCEN=1 */
+ SDHC_XFERTYP_CCCEN |
+ SDHC_XFERTYP_RSPTYP_136;
+
+ bool waited = send_and_wait_cmd(sdcp, xfer);
+
+ resp[0] = SDHC->CMDRSP[0];
+ resp[1] = SDHC->CMDRSP[1];
+ resp[2] = SDHC->CMDRSP[2];
+ resp[3] = SDHC->CMDRSP[3];
+
+ return waited;
+}
+
+/**
+ * @brief Reads one or more blocks.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] startblk first block to read
+ * @param[out] buf pointer to the read buffer
+ * @param[in] n number of blocks to read
+ *
+ * @return The operation status.
+ * @retval HAL_SUCCESS operation succeeded.
+ * @retval HAL_FAILED operation failed.
+ *
+ * @notapi
+ */
+
+bool sdc_lld_read(SDCDriver *sdcp, uint32_t startblk,
+ uint8_t *buf, uint32_t n) {
+ uint32_t cmdx = (n == 1)?
+ SDHC_XFERTYP_CMDINX(MMCSD_CMD_READ_SINGLE_BLOCK) :
+ SDHC_XFERTYP_CMDINX(MMCSD_CMD_READ_MULTIPLE_BLOCK);
+ cmdx |= SDHC_XFERTYP_DTDSEL;
+
+ return sdc_lld_transfer(sdcp, startblk, (uintptr_t)buf, n, cmdx);
+}
+
+/**
+ * @brief Writes one or more blocks.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ * @param[in] startblk first block to write
+ * @param[out] buf pointer to the write buffer
+ * @param[in] n number of blocks to write
+ *
+ * @return The operation status.
+ * @retval HAL_SUCCESS operation succeeded.
+ * @retval HAL_FAILED operation failed.
+ *
+ * @notapi
+ */
+bool sdc_lld_write(SDCDriver *sdcp, uint32_t startblk,
+ const uint8_t *buf, uint32_t n) {
+ uint32_t cmdx = (n == 1)?
+ SDHC_XFERTYP_CMDINX(MMCSD_CMD_WRITE_BLOCK) :
+ SDHC_XFERTYP_CMDINX(MMCSD_CMD_WRITE_MULTIPLE_BLOCK);
+
+ return sdc_lld_transfer(sdcp, startblk, (uintptr_t)buf, n, cmdx);
+}
+
+/**
+ * @brief Waits for card idle condition.
+ *
+ * @param[in] sdcp pointer to the @p SDCDriver object
+ *
+ * @return The operation status.
+ * @retval HAL_SUCCESS the operation succeeded.
+ * @retval HAL_FAILED the operation failed.
+ *
+ * @api
+ */
+bool sdc_lld_sync(SDCDriver *sdcp) {
+
+ (void)sdcp;
+
+ return HAL_SUCCESS;
+}
+
+bool sdc_lld_read_special(SDCDriver *sdcp, uint8_t *buf, size_t bytes,
+ uint8_t cmd, uint32_t argument) {
+ uintptr_t bufaddr = (uintptr_t)buf;
+
+ osalDbgCheck((bufaddr & 0x03) == 0); /* Must be 32-bit aligned */
+ osalDbgCheck(bytes > 0);
+ osalDbgCheck(bytes < 4096);
+
+ osalDbgAssert((SDHC->PRSSTAT & (SDHC_PRSSTAT_DLA|SDHC_PRSSTAT_CDIHB|SDHC_PRSSTAT_CIHB)) == 0,
+ "SDHC interface not ready");
+
+ TRACE(5, argument);
+
+ /* Store the cmd argument and DMA start address */
+ SDHC->CMDARG = argument;
+ SDHC->DSADDR = bufaddr;
+
+ /* We're reading one block, of a (possibly) nonstandard size */
+ SDHC->BLKATTR = SDHC_BLKATTR_BLKSIZE(bytes);
+
+ uint32_t xfer =
+ SDHC_XFERTYP_CMDINX(cmd) | /* the command */
+ SDHC_XFERTYP_DTDSEL | /* read transfer (card -> host) */
+ SDHC_XFERTYP_CMDTYP_NORMAL |
+ SDHC_XFERTYP_CICEN | SDHC_XFERTYP_CCCEN |
+ SDHC_XFERTYP_RSPTYP_48 |
+ SDHC_XFERTYP_DPSEL | SDHC_XFERTYP_DMAEN; /* DMA-assisted data transfer */
+
+ return send_and_wait_transfer(sdcp, xfer);
+}
+
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+ (void)sdcp;
+
+ return ( SDHC->PRSSTAT & SDHC_PRSSTAT_CLSL )? true : false;
+}
+
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+ (void)sdcp;
+ return false;
+}
+
+#endif /* HAL_USE_SDC == TRUE */
+
+/** @} */
diff --git a/os/hal/ports/KINETIS/LLD/hal_sdc_lld.h b/os/hal/ports/KINETIS/LLD/hal_sdc_lld.h new file mode 100644 index 0000000..9f77bf6 --- /dev/null +++ b/os/hal/ports/KINETIS/LLD/hal_sdc_lld.h @@ -0,0 +1,202 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ Copyright (C) 2017 Wim Lewis
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_sdc_lld.h
+ * @brief PLATFORM SDC subsystem low level driver header.
+ *
+ * @addtogroup SDC
+ * @{
+ */
+
+#ifndef HAL_SDC_LLD_H
+#define HAL_SDC_LLD_H
+
+#if (HAL_USE_SDC == TRUE) || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+#define SDHC_XFERTYP_CMDTYP_NORMAL SDHC_XFERTYP_CMDTYP(0)
+#define SDHC_XFERTYP_CMDTYP_SUSPEND SDHC_XFERTYP_CMDTYP(1)
+#define SDHC_XFERTYP_CMDTYP_RESUME SDHC_XFERTYP_CMDTYP(2)
+#define SDHC_XFERTYP_CMDTYP_ABORT SDHC_XFERTYP_CMDTYP(3)
+
+#define SDHC_XFERTYP_RSPTYP_NONE SDHC_XFERTYP_RSPTYP(0) /* no response */
+#define SDHC_XFERTYP_RSPTYP_136 SDHC_XFERTYP_RSPTYP(1) /* 136-bit response */
+#define SDHC_XFERTYP_RSPTYP_48 SDHC_XFERTYP_RSPTYP(2) /* 48-bit response */
+#define SDHC_XFERTYP_RSPTYP_48b SDHC_XFERTYP_RSPTYP(3) /* 48-bit plus busy */
+
+#define SDHC_PROCTL_DTW_1BIT SDHC_PROCTL_DTW(0)
+#define SDHC_PROCTL_DTW_4BIT SDHC_PROCTL_DTW(1)
+#define SDHC_PROCTL_DTW_8BIT SDHC_PROCTL_DTW(2)
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name PLATFORM configuration options
+ * @{
+ */
+/**
+ * @brief SDC1 driver enable switch.
+ * @details If set to @p TRUE the support for SDC1 is included.
+ * @note The default is @p TRUE if HAL_USE_SDC is set.
+ */
+#if !defined(PLATFORM_SDC_USE_SDC1) || defined(__DOXYGEN__)
+#define PLATFORM_SDC_USE_SDC1 TRUE
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of card flags.
+ */
+typedef uint32_t sdcmode_t;
+
+/**
+ * @brief SDC Driver condition flags type.
+ */
+typedef uint32_t sdcflags_t;
+
+/**
+ * @brief Type of a structure representing an SDC driver.
+ */
+typedef struct SDCDriver SDCDriver;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief Working area for memory consuming operations.
+ * @note It is mandatory for detecting MMC cards bigger than 2GB else it
+ * can be @p NULL.
+ * @note Memory pointed by this buffer is only used by @p sdcConnect(),
+ * afterward it can be reused for other purposes.
+ */
+ uint8_t *scratchpad;
+ /**
+ * @brief Bus width.
+ */
+ sdcbusmode_t bus_width;
+ /* End of the mandatory fields.*/
+} SDCConfig;
+
+/**
+ * @brief @p SDCDriver specific methods.
+ */
+#define _sdc_driver_methods \
+ _mmcsd_block_device_methods
+
+/**
+ * @extends MMCSDBlockDeviceVMT
+ *
+ * @brief @p SDCDriver virtual methods table.
+ */
+struct SDCDriverVMT {
+ _sdc_driver_methods
+};
+
+/**
+ * @brief Structure representing an SDC driver.
+ */
+struct SDCDriver {
+ /**
+ * @brief Virtual Methods Table.
+ */
+ const struct SDCDriverVMT *vmt;
+ _mmcsd_block_device_data
+ /**
+ * @brief Current configuration data.
+ */
+ const SDCConfig *config;
+ /**
+ * @brief Various flags regarding the mounted card.
+ */
+ sdcmode_t cardmode;
+ /**
+ * @brief Errors flags.
+ */
+ sdcflags_t errors;
+ /**
+ * @brief Card RCA.
+ */
+ uint32_t rca;
+ /* End of the mandatory fields.*/
+
+ /* Platform specific fields */
+ thread_reference_t thread;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if (PLATFORM_SDC_USE_SDC1 == TRUE) && !defined(__DOXYGEN__)
+extern SDCDriver SDCD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void sdc_lld_init(void);
+ void sdc_lld_start(SDCDriver *sdcp);
+ void sdc_lld_stop(SDCDriver *sdcp);
+ void sdc_lld_start_clk(SDCDriver *sdcp);
+ void sdc_lld_set_data_clk(SDCDriver *sdcp, sdcbusclk_t clk);
+ void sdc_lld_stop_clk(SDCDriver *sdcp);
+ void sdc_lld_set_bus_mode(SDCDriver *sdcp, sdcbusmode_t mode);
+ void sdc_lld_send_cmd_none(SDCDriver *sdcp, uint8_t cmd, uint32_t arg);
+ bool sdc_lld_send_cmd_short(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
+ uint32_t *resp);
+ bool sdc_lld_send_cmd_short_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
+ uint32_t *resp);
+ bool sdc_lld_send_cmd_long_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
+ uint32_t *resp);
+ bool sdc_lld_read_special(SDCDriver *sdcp, uint8_t *buf, size_t bytes,
+ uint8_t cmd, uint32_t argument);
+ bool sdc_lld_read(SDCDriver *sdcp, uint32_t startblk,
+ uint8_t *buf, uint32_t n);
+ bool sdc_lld_write(SDCDriver *sdcp, uint32_t startblk,
+ const uint8_t *buf, uint32_t n);
+ bool sdc_lld_sync(SDCDriver *sdcp);
+ bool sdc_lld_is_card_inserted(SDCDriver *sdcp);
+ bool sdc_lld_is_write_protected(SDCDriver *sdcp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_SDC == TRUE */
+
+#endif /* HAL_SDC_LLD_H */
+
+/** @} */
diff --git a/os/hal/ports/KINETIS/LLD/hal_serial_lld.c b/os/hal/ports/KINETIS/LLD/hal_serial_lld.c index c80cf22..c92fa5c 100644 --- a/os/hal/ports/KINETIS/LLD/hal_serial_lld.c +++ b/os/hal/ports/KINETIS/LLD/hal_serial_lld.c @@ -1,5 +1,6 @@ /*
ChibiOS - Copyright (C) 2013-2015 Fabio Utzig
+ Copyright (C) 2017 Wim Lewis
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -50,6 +51,18 @@ SerialDriver SD2; SerialDriver SD3;
#endif
+#if KINETIS_SERIAL_USE_UART3 || defined(__DOXYGEN__)
+SerialDriver SD4;
+#endif
+
+#if KINETIS_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+SerialDriver SD5;
+#endif
+
+#if KINETIS_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+SerialDriver SD6;
+#endif
+
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
@@ -95,33 +108,37 @@ static void serve_error_interrupt(SerialDriver *sdp) { UART_w_TypeDef *u = &(sdp->uart);
uint8_t s1 = *(u->s1_p);
- /* S1 bits are write-1-to-clear for UART0 on KL2x. */
- /* Clearing on K20x and KL2x/UART>0 is done by reading S1 and
+ /* Clearing on K20x, K60x, and KL2x/UART>0 is done by reading S1 and
* then reading D.*/
-#if defined(KL2x) && KINETIS_SERIAL_USE_UART0
- if(sdp == &SD1) {
- if(s1 & UARTx_S1_IDLE) {
- *(u->s1_p) |= UARTx_S1_IDLE;
- }
+ if(s1 & UARTx_S1_IDLE) {
+ (void)*(u->d_p);
+ }
- if(s1 & (UARTx_S1_OR | UARTx_S1_NF | UARTx_S1_FE | UARTx_S1_PF)) {
- set_error(sdp, s1);
- *(u->s1_p) |= UARTx_S1_OR | UARTx_S1_NF | UARTx_S1_FE | UARTx_S1_PF;
- }
- return;
+ if(s1 & (UARTx_S1_OR | UARTx_S1_NF | UARTx_S1_FE | UARTx_S1_PF)) {
+ set_error(sdp, s1);
+ (void)*(u->d_p);
}
-#endif /* KL2x && KINETIS_SERIAL_USE_UART0 */
+}
+
+#if defined(KL2x) && KINETIS_SERIAL_USE_UART0
+static void serve_error_interrupt_uart0(void) {
+ SerialDriver *sdp = &SD1;
+ UART_w_TypeDef *u = &(sdp->uart);
+ uint8_t s1 = *(u->s1_p);
+
+ /* S1 bits are write-1-to-clear for UART0 on KL2x. */
if(s1 & UARTx_S1_IDLE) {
- (void)*(u->d_p);
+ *(u->s1_p) |= UARTx_S1_IDLE;
}
if(s1 & (UARTx_S1_OR | UARTx_S1_NF | UARTx_S1_FE | UARTx_S1_PF)) {
set_error(sdp, s1);
- (void)*(u->d_p);
+ *(u->s1_p) |= UARTx_S1_OR | UARTx_S1_NF | UARTx_S1_FE | UARTx_S1_PF;
}
}
+#endif /* KL2x && KINETIS_SERIAL_USE_UART0 */
/**
* @brief Common IRQ handler.
@@ -161,6 +178,12 @@ static void serve_interrupt(SerialDriver *sdp) { }
}
+#if defined(KL2x) && KINETIS_SERIAL_USE_UART0
+ if (sdp == &SD1) {
+ serve_error_interrupt_uart0();
+ return;
+ }
+#endif
serve_error_interrupt(sdp);
}
@@ -184,29 +207,28 @@ static void preload(SerialDriver *sdp) { /**
* @brief Driver output notification.
*/
-#if KINETIS_SERIAL_USE_UART0 || defined(__DOXYGEN__)
-static void notify1(io_queue_t *qp)
+static void notify(io_queue_t *qp)
{
- (void)qp;
- preload(&SD1);
+ preload(qp->q_link);
}
-#endif
-#if KINETIS_SERIAL_USE_UART1 || defined(__DOXYGEN__)
-static void notify2(io_queue_t *qp)
-{
- (void)qp;
- preload(&SD2);
-}
-#endif
-
-#if KINETIS_SERIAL_USE_UART2 || defined(__DOXYGEN__)
-static void notify3(io_queue_t *qp)
-{
- (void)qp;
- preload(&SD3);
+/**
+ * @brief Common driver initialization, except LP.
+ */
+static void sd_lld_init_driver(SerialDriver *SDn, UART_TypeDef *UARTn) {
+ /* Driver initialization.*/
+ sdObjectInit(SDn, NULL, notify);
+ SDn->uart.bdh_p = &(UARTn->BDH);
+ SDn->uart.bdl_p = &(UARTn->BDL);
+ SDn->uart.c1_p = &(UARTn->C1);
+ SDn->uart.c2_p = &(UARTn->C2);
+ SDn->uart.c3_p = &(UARTn->C3);
+ SDn->uart.c4_p = &(UARTn->C4);
+ SDn->uart.s1_p = (volatile uint8_t *)&(UARTn->S1);
+ SDn->uart.s2_p = &(UARTn->S2);
+ SDn->uart.d_p = &(UARTn->D);
+ SDn->uart.uart_p = UARTn;
}
-#endif
/**
* @brief Common UART configuration.
@@ -240,9 +262,9 @@ static void configure_uart(SerialDriver *sdp, const SerialConfig *config) { }
#endif /* KINETIS_SERIAL_USE_UART0 */
-#elif defined(K20x) /* KL2x */
+#elif defined(K20x) || defined(K60x) /* KL2x */
- /* UARTs 0 and 1 are clocked from SYSCLK, others from BUSCLK on K20x. */
+ /* UARTs 0 and 1 are clocked from SYSCLK, others from BUSCLK on K20x and K60x. */
#if KINETIS_SERIAL_USE_UART0
if(sdp == &SD1)
divisor = KINETIS_SYSCLK_FREQUENCY;
@@ -260,9 +282,9 @@ static void configure_uart(SerialDriver *sdp, const SerialConfig *config) { *(uart->bdh_p) = UARTx_BDH_SBR(divisor >> 13) | (*(uart->bdh_p) & ~UARTx_BDH_SBR_MASK);
*(uart->bdl_p) = UARTx_BDL_SBR(divisor >> 5);
-#if defined(K20x)
+#if defined(K20x) || defined(K60x)
*(uart->c4_p) = UARTx_C4_BRFA(divisor) | (*(uart->c4_p) & ~UARTx_C4_BRFA_MASK);
-#endif /* K20x */
+#endif /* K20x, K60x */
/* Line settings. */
*(uart->c1_p) = 0;
@@ -300,12 +322,40 @@ OSAL_IRQ_HANDLER(KINETIS_SERIAL2_IRQ_VECTOR) { }
#endif
+#if KINETIS_SERIAL_USE_UART3 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(KINETIS_SERIAL3_IRQ_VECTOR) {
+ OSAL_IRQ_PROLOGUE();
+ serve_interrupt(&SD4);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if KINETIS_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(KINETIS_SERIAL4_IRQ_VECTOR) {
+ OSAL_IRQ_PROLOGUE();
+ serve_interrupt(&SD5);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if KINETIS_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(KINETIS_SERIAL5_IRQ_VECTOR) {
+ OSAL_IRQ_PROLOGUE();
+ serve_interrupt(&SD6);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
#if KINETIS_HAS_SERIAL_ERROR_IRQ
#if KINETIS_SERIAL_USE_UART0 || defined(__DOXYGEN__)
OSAL_IRQ_HANDLER(KINETIS_SERIAL0_ERROR_IRQ_VECTOR) {
OSAL_IRQ_PROLOGUE();
+#if defined(KL2x)
+ serve_error_interrupt_uart0();
+#else
serve_error_interrupt(&SD1);
+#endif
OSAL_IRQ_EPILOGUE();
}
#endif
@@ -326,6 +376,30 @@ OSAL_IRQ_HANDLER(KINETIS_SERIAL2_ERROR_IRQ_VECTOR) { }
#endif
+#if KINETIS_SERIAL_USE_UART3 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(KINETIS_SERIAL3_ERROR_IRQ_VECTOR) {
+ OSAL_IRQ_PROLOGUE();
+ serve_error_interrupt(&SD4);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if KINETIS_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(KINETIS_SERIAL4_ERROR_IRQ_VECTOR) {
+ OSAL_IRQ_PROLOGUE();
+ serve_error_interrupt(&SD5);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if KINETIS_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+OSAL_IRQ_HANDLER(KINETIS_SERIAL5_ERROR_IRQ_VECTOR) {
+ OSAL_IRQ_PROLOGUE();
+ serve_error_interrupt(&SD6);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
#endif /* KINETIS_HAS_SERIAL_ERROR_IRQ */
/*===========================================================================*/
@@ -341,19 +415,11 @@ void sd_lld_init(void) { #if KINETIS_SERIAL_USE_UART0
/* Driver initialization.*/
- sdObjectInit(&SD1, NULL, notify1);
#if ! KINETIS_SERIAL0_IS_LPUART
- SD1.uart.bdh_p = &(UART0->BDH);
- SD1.uart.bdl_p = &(UART0->BDL);
- SD1.uart.c1_p = &(UART0->C1);
- SD1.uart.c2_p = &(UART0->C2);
- SD1.uart.c3_p = &(UART0->C3);
- SD1.uart.c4_p = &(UART0->C4);
- SD1.uart.s1_p = (volatile uint8_t *)&(UART0->S1);
- SD1.uart.s2_p = &(UART0->S2);
- SD1.uart.d_p = &(UART0->D);
+ sd_lld_init_driver(&SD1, UART0);
#else /* ! KINETIS_SERIAL0_IS_LPUART */
/* little endian! */
+ sdObjectInit(&SD1, NULL, notify);
SD1.uart.bdh_p = ((uint8_t *)&(LPUART0->BAUD)) + 1; /* BDH: BAUD, byte 3 */
SD1.uart.bdl_p = ((uint8_t *)&(LPUART0->BAUD)) + 0; /* BDL: BAUD, byte 4 */
SD1.uart.c1_p = ((uint8_t *)&(LPUART0->CTRL)) + 0; /* C1: CTRL, byte 4 */
@@ -377,20 +443,11 @@ void sd_lld_init(void) { #if KINETIS_SERIAL_USE_UART1
/* Driver initialization.*/
- sdObjectInit(&SD2, NULL, notify2);
#if ! KINETIS_SERIAL1_IS_LPUART
- SD2.uart.bdh_p = &(UART1->BDH);
- SD2.uart.bdl_p = &(UART1->BDL);
- SD2.uart.c1_p = &(UART1->C1);
- SD2.uart.c2_p = &(UART1->C2);
- SD2.uart.c3_p = &(UART1->C3);
- SD2.uart.c4_p = &(UART1->C4);
- SD2.uart.s1_p = (volatile uint8_t *)&(UART1->S1);
- SD2.uart.s2_p = &(UART1->S2);
- SD2.uart.d_p = &(UART1->D);
- SD2.uart.uart_p = UART1;
+ sd_lld_init_driver(&SD2, UART1);
#else /* ! KINETIS_SERIAL1_IS_LPUART */
/* little endian! */
+ sdObjectInit(&SD2, NULL, notify);
SD2.uart.bdh_p = ((uint8_t *)&(LPUART1->BAUD)) + 1; /* BDH: BAUD, byte 3 */
SD2.uart.bdl_p = ((uint8_t *)&(LPUART1->BAUD)) + 0; /* BDL: BAUD, byte 4 */
SD2.uart.c1_p = ((uint8_t *)&(LPUART1->CTRL)) + 0; /* C1: CTRL, byte 4 */
@@ -406,19 +463,20 @@ void sd_lld_init(void) { #endif /* KINETIS_SERIAL_USE_UART1 */
#if KINETIS_SERIAL_USE_UART2
- /* Driver initialization.*/
- sdObjectInit(&SD3, NULL, notify3);
- SD3.uart.bdh_p = &(UART2->BDH);
- SD3.uart.bdl_p = &(UART2->BDL);
- SD3.uart.c1_p = &(UART2->C1);
- SD3.uart.c2_p = &(UART2->C2);
- SD3.uart.c3_p = &(UART2->C3);
- SD3.uart.c4_p = &(UART2->C4);
- SD3.uart.s1_p = (volatile uint8_t *)&(UART2->S1);
- SD3.uart.s2_p = &(UART2->S2);
- SD3.uart.d_p = &(UART2->D);
- SD3.uart.uart_p = UART2;
+ sd_lld_init_driver(&SD3, UART2);
#endif /* KINETIS_SERIAL_USE_UART2 */
+
+#if KINETIS_SERIAL_USE_UART3
+ sd_lld_init_driver(&SD4, UART3);
+#endif /* KINETIS_SERIAL_USE_UART3 */
+
+#if KINETIS_SERIAL_USE_UART4
+ sd_lld_init_driver(&SD5, UART4);
+#endif /* KINETIS_SERIAL_USE_UART4 */
+
+#if KINETIS_SERIAL_USE_UART5
+ sd_lld_init_driver(&SD6, UART5);
+#endif /* KINETIS_SERIAL_USE_UART5 */
}
/**
@@ -505,6 +563,33 @@ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) { }
#endif /* KINETIS_SERIAL_USE_UART2 */
+#if KINETIS_SERIAL_USE_UART3
+ if (sdp == &SD4) {
+ SIM->SCGC4 |= SIM_SCGC4_UART3;
+ configure_uart(sdp, config);
+ nvicEnableVector(UART3Status_IRQn, KINETIS_SERIAL_UART3_PRIORITY);
+ nvicEnableVector(UART3Error_IRQn, KINETIS_SERIAL_UART3_PRIORITY);
+ }
+#endif /* KINETIS_SERIAL_USE_UART3 */
+
+#if KINETIS_SERIAL_USE_UART4
+ if (sdp == &SD5) {
+ SIM->SCGC1 |= SIM_SCGC1_UART4;
+ configure_uart(sdp, config);
+ nvicEnableVector(UART4Status_IRQn, KINETIS_SERIAL_UART4_PRIORITY);
+ nvicEnableVector(UART4Error_IRQn, KINETIS_SERIAL_UART4_PRIORITY);
+ }
+#endif /* KINETIS_SERIAL_USE_UART4 */
+
+#if KINETIS_SERIAL_USE_UART5
+ if (sdp == &SD6) {
+ SIM->SCGC1 |= SIM_SCGC1_UART5;
+ configure_uart(sdp, config);
+ nvicEnableVector(UART5Status_IRQn, KINETIS_SERIAL_UART5_PRIORITY);
+ nvicEnableVector(UART5Error_IRQn, KINETIS_SERIAL_UART5_PRIORITY);
+ }
+#endif /* KINETIS_SERIAL_USE_UART5 */
+
}
/* Configures the peripheral.*/
@@ -575,6 +660,30 @@ void sd_lld_stop(SerialDriver *sdp) { SIM->SCGC4 &= ~SIM_SCGC4_UART2;
}
#endif
+
+#if KINETIS_SERIAL_USE_UART3
+ if (sdp == &SD4) {
+ nvicDisableVector(UART3Status_IRQn);
+ nvicDisableVector(UART3Error_IRQn);
+ SIM->SCGC4 &= ~SIM_SCGC4_UART3;
+ }
+#endif
+
+#if KINETIS_SERIAL_USE_UART4
+ if (sdp == &SD5) {
+ nvicDisableVector(UART4Status_IRQn);
+ nvicDisableVector(UART4Error_IRQn);
+ SIM->SCGC1 &= ~SIM_SCGC1_UART4;
+ }
+#endif
+
+#if KINETIS_SERIAL_USE_UART5
+ if (sdp == &SD6) {
+ nvicDisableVector(UART5Status_IRQn);
+ nvicDisableVector(UART5Error_IRQn);
+ SIM->SCGC1 &= ~SIM_SCGC1_UART5;
+ }
+#endif
}
}
diff --git a/os/hal/ports/KINETIS/LLD/hal_serial_lld.h b/os/hal/ports/KINETIS/LLD/hal_serial_lld.h index f11c063..3cb6d2b 100644 --- a/os/hal/ports/KINETIS/LLD/hal_serial_lld.h +++ b/os/hal/ports/KINETIS/LLD/hal_serial_lld.h @@ -60,6 +60,27 @@ #if !defined(KINETIS_SERIAL_USE_UART2) || defined(__DOXYGEN__)
#define KINETIS_SERIAL_USE_UART2 FALSE
#endif
+/**
+ * @brief SD4 driver enable switch.
+ * @details If set to @p TRUE the support for SD4 is included.
+ */
+#if !defined(KINETIS_SERIAL_USE_UART3) || defined(__DOXYGEN__)
+#define KINETIS_SERIAL_USE_UART3 FALSE
+#endif
+/**
+ * @brief SD5 driver enable switch.
+ * @details If set to @p TRUE the support for SD5 is included.
+ */
+#if !defined(KINETIS_SERIAL_USE_UART4) || defined(__DOXYGEN__)
+#define KINETIS_SERIAL_USE_UART4 FALSE
+#endif
+/**
+ * @brief SD6 driver enable switch.
+ * @details If set to @p TRUE the support for SD6 is included.
+ */
+#if !defined(KINETIS_SERIAL_USE_UART5) || defined(__DOXYGEN__)
+#define KINETIS_SERIAL_USE_UART5 FALSE
+#endif
/**
* @brief UART0 interrupt priority level setting.
@@ -83,6 +104,27 @@ #endif
/**
+ * @brief UART3 interrupt priority level setting.
+ */
+#if !defined(KINETIS_SERIAL_UART3_PRIORITY) || defined(__DOXYGEN__)
+#define KINETIS_SERIAL_UART3_PRIORITY 12
+#endif
+
+/**
+ * @brief UART4 interrupt priority level setting.
+ */
+#if !defined(KINETIS_SERIAL_UART4_PRIORITY) || defined(__DOXYGEN__)
+#define KINETIS_SERIAL_UART4_PRIORITY 12
+#endif
+
+/**
+ * @brief UART5 interrupt priority level setting.
+ */
+#if !defined(KINETIS_SERIAL_UART5_PRIORITY) || defined(__DOXYGEN__)
+#define KINETIS_SERIAL_UART5_PRIORITY 12
+#endif
+
+/**
* @brief UART0 clock source.
*/
#if !defined(KINETIS_UART0_CLOCK_SRC) || defined(__DOXYGEN__)
@@ -115,8 +157,21 @@ #error "UART2 not present in the selected device"
#endif
+#if KINETIS_SERIAL_USE_UART3 && !KINETIS_HAS_SERIAL3
+#error "UART3 not present in the selected device"
+#endif
+
+#if KINETIS_SERIAL_USE_UART4 && !KINETIS_HAS_SERIAL4
+#error "UART4 not present in the selected device"
+#endif
+
+#if KINETIS_SERIAL_USE_UART5 && !KINETIS_HAS_SERIAL5
+#error "UART5 not present in the selected device"
+#endif
+
#if !(KINETIS_SERIAL_USE_UART0 || KINETIS_SERIAL_USE_UART1 || \
- KINETIS_SERIAL_USE_UART2)
+ KINETIS_SERIAL_USE_UART2 || KINETIS_SERIAL_USE_UART3 || \
+ KINETIS_SERIAL_USE_UART4 || KINETIS_SERIAL_USE_UART5)
#error "Serial driver activated but no UART peripheral assigned"
#endif
@@ -203,6 +258,18 @@ extern SerialDriver SD2; extern SerialDriver SD3;
#endif
+#if KINETIS_SERIAL_USE_UART3 && !defined(__DOXYGEN__)
+extern SerialDriver SD4;
+#endif
+
+#if KINETIS_SERIAL_USE_UART4 && !defined(__DOXYGEN__)
+extern SerialDriver SD5;
+#endif
+
+#if KINETIS_SERIAL_USE_UART5 && !defined(__DOXYGEN__)
+extern SerialDriver SD6;
+#endif
+
#ifdef __cplusplus
extern "C" {
#endif
diff --git a/os/hal/ports/KINETIS/LLD/hal_usb_lld.c b/os/hal/ports/KINETIS/LLD/hal_usb_lld.c index e8d9778..ba91d24 100644 --- a/os/hal/ports/KINETIS/LLD/hal_usb_lld.c +++ b/os/hal/ports/KINETIS/LLD/hal_usb_lld.c @@ -158,7 +158,7 @@ void usb_packet_transmit(USBDriver *usbp, usbep_t ep, size_t n) USBInEndpointState *isp = epc->in_state;
bd_t *bd = (bd_t *)&_bdt[BDT_INDEX(ep, TX, isp->odd_even)];
-
+
if (n > (size_t)epc->in_maxsize)
n = (size_t)epc->in_maxsize;
@@ -244,19 +244,16 @@ OSAL_IRQ_HANDLER(KINETIS_USB_IRQ_VECTOR) { {
case BDT_PID_SETUP: // SETUP
{
- /* Clear any pending IN stuff */
- _bdt[BDT_INDEX(ep, TX, EVEN)].desc = 0;
- _bdt[BDT_INDEX(ep, TX, ODD)].desc = 0;
- /* Also in the chibios state machine */
+ /* Clear receiving in the chibios state machine */
(usbp)->receiving &= ~1;
- /* After a SETUP, IN is always DATA1 */
- usbp->epc[ep]->in_state->data_bank = DATA1;
-
- /* Call SETUP function (ChibiOS core), which sends back stuff */
+ /* Call SETUP function (ChibiOS core), which prepares
+ * for send or receive and releases the buffer
+ */
_usb_isr_invoke_setup_cb(usbp, ep);
- /* Buffer is released by the above callback. */
- /* from Paul: "unfreeze the USB, now that we're ready" */
- USB0->CTL = USBx_CTL_USBENSOFEN;
+ /* When a setup packet is received, tx is suspended,
+ * so it needs to be resumed here.
+ */
+ USB0->CTL &= ~USBx_CTL_TXSUSPENDTOKENBUSY;
} break;
case BDT_PID_IN: // IN
{
@@ -728,9 +725,23 @@ void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf) { }
/* Release the buffer
* Setup packet is always DATA0
- * Initialize buffers so current expects DATA0 & opposite DATA1 */
+ * Release the current DATA0 buffer
+ */
bd->desc = BDT_DESC(usbp->epc[ep]->out_maxsize,DATA0);
- _bdt[BDT_INDEX(ep, RX, os->odd_even^ODD)].desc = BDT_DESC(usbp->epc[ep]->out_maxsize,DATA1);
+ /* If DATA1 was expected, then the states are out of sync.
+ * So reset the other buffer too, and set it as DATA1.
+ * This should not happen in normal cases, but is possible in
+ * error situations. NOTE: it's possible that this is too late
+ * and the next packet has already been received and dropped, but
+ * there's nothing that we can do about that anymore at this point.
+ */
+ if (os->data_bank == DATA1)
+ {
+ bd_t *bd_next = (bd_t*)&_bdt[BDT_INDEX(ep, RX, os->odd_even^ODD)];
+ bd_next->desc = BDT_DESC(usbp->epc[ep]->out_maxsize,DATA1);
+ }
+ /* After a SETUP, both in and out are always DATA1 */
+ usbp->epc[ep]->in_state->data_bank = DATA1;
os->data_bank = DATA1;
}
@@ -762,8 +773,22 @@ void usb_lld_start_out(USBDriver *usbp, usbep_t ep) { * @notapi
*/
void usb_lld_start_in(USBDriver *usbp, usbep_t ep) {
- (void)usbp;
- (void)ep;
+ if (ep == 0 && usbp->ep0state == USB_EP0_IN_SENDING_STS) {
+ /* When a status packet is about to be sent on endpoint 0 the
+ * next packet will be a setup packet, which means that the
+ * buffer we expect after this should be DATA0, and the following
+ * DATA1. Since no out packets should be in flight at this time
+ * it's safe to initialize the buffers according to the expectations
+ * here.
+ */
+ const USBEndpointConfig* epc = usbp->epc[ep];
+ bd_t * bd = (bd_t*)&_bdt[BDT_INDEX(ep, RX, epc->out_state->odd_even)];
+ bd_t *bd_next = (bd_t*)&_bdt[BDT_INDEX(ep, RX, epc->out_state->odd_even^ODD)];
+
+ bd->desc = BDT_DESC(usbp->epc[ep]->out_maxsize,DATA1);
+ bd_next->desc = BDT_DESC(usbp->epc[ep]->out_maxsize,DATA0);
+ epc->out_state->data_bank = DATA0;
+ }
usb_packet_transmit(usbp,ep,usbp->epc[ep]->in_state->txsize);
}
diff --git a/os/hal/ports/KINETIS/LLD/hal_usb_lld.h b/os/hal/ports/KINETIS/LLD/hal_usb_lld.h index 615d10d..ed65b3b 100644 --- a/os/hal/ports/KINETIS/LLD/hal_usb_lld.h +++ b/os/hal/ports/KINETIS/LLD/hal_usb_lld.h @@ -76,6 +76,13 @@ #define KINETIS_USB_ENDPOINTS USB_MAX_ENDPOINTS+1
#endif
+/**
+ * @brief Host wake-up procedure duration.
+ */
+#if !defined(USB_HOST_WAKEUP_DURATION) || defined(__DOXYGEN__)
+#define USB_HOST_WAKEUP_DURATION 2
+#endif
+
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
@@ -97,6 +104,10 @@ #error "KINETIS_USB_IRQ_VECTOR not defined"
#endif
+#if (USB_HOST_WAKEUP_DURATION < 2) || (USB_HOST_WAKEUP_DURATION > 15)
+#error "invalid USB_HOST_WAKEUP_DURATION setting, it must be between 2 and 15"
+#endif
+
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
@@ -413,6 +424,18 @@ struct USBDriver { #endif /* KINETIS_USB0_IS_USBOTG */
#endif
+/**
+ * @brief Start of host wake-up procedure.
+ *
+ * @notapi
+ */
+#define usb_lld_wakeup_host(usbp) \
+ do{ \
+ USB0->CTL |= USBx_CTL_RESUME; \
+ osalThreadSleepMilliseconds(USB_HOST_WAKEUP_DURATION); \
+ USB0->CTL &= ~USBx_CTL_RESUME; \
+ } while (false)
+
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
diff --git a/os/hal/ports/MSP430X/hal_adc_lld.c b/os/hal/ports/MSP430X/hal_adc_lld.c new file mode 100644 index 0000000..42d3cbe --- /dev/null +++ b/os/hal/ports/MSP430X/hal_adc_lld.c @@ -0,0 +1,354 @@ +/*
+ ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_adc_lld.c
+ * @brief MSP430X ADC subsystem low level driver source.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#include "hal.h"
+
+#if (HAL_USE_ADC == TRUE) || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief ADC1 driver identifier.
+ */
+#if (MSP430X_ADC_USE_ADC1 == TRUE) || defined(__DOXYGEN__)
+ADCDriver ADCD1;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static void restart_dma(ADCDriver * adcp) {
+ /* TODO timeouts? */
+ /* Restart DMA transfer */
+ if (adcp->dma.registers == NULL) {
+ /* Acquire a DMA stream because dmaTransfer can be called from ISRs */
+ osalSysLockFromISR();
+ dmaAcquireI(&(adcp->dma), adcp->dma.index);
+ osalSysUnlockFromISR();
+ dmaTransfer(&(adcp->dma), &(adcp->req));
+ }
+ else {
+ dmaTransfer(&(adcp->dma), &(adcp->req));
+ }
+}
+
+static void dma_callback(void * args) {
+ ADCDriver * adcp = (ADCDriver *)args;
+
+ if (adcp->grpp == NULL)
+ return;
+
+ adcp->count++;
+
+ if (adcp->count == adcp->depth / 2) {
+ /* half-full interrupt */
+ _adc_isr_half_code(adcp);
+ }
+
+ if (adcp->count == adcp->depth) {
+ /* full interrupt */
+
+ /* adc_lld_stop_conversion is called automatically here if needed */
+ _adc_isr_full_code(adcp);
+ /* after isr_full, adcp->grpp is only non-NULL if it's a circular group */
+ if (adcp->grpp) {
+ /* Reset the buffer pointer */
+ adcp->req.dest_addr = adcp->samples;
+
+ restart_dma(adcp);
+
+ /* Reset the count */
+ adcp->count = 0;
+
+ /* Start next sequence */
+ adcp->regs->ctl[0] |= ADC12SC;
+ }
+ }
+ else {
+ /* Advance the buffer pointer */
+ adcp->req.dest_addr = adcp->samples + (adcp->req.size * adcp->count);
+
+ restart_dma(adcp);
+
+ /* Start next sequence */
+ adcp->regs->ctl[0] |= ADC12SC;
+ }
+}
+
+static void populate_tlv(ADCDriver * adcp) {
+ uint8_t * tlv_addr = (uint8_t *)TLV_START;
+
+ while (*tlv_addr != TLV_TAGEND && tlv_addr < (uint8_t *)TLV_END) {
+ if (*tlv_addr == TLV_ADC12CAL) {
+ adcp->adc_cal = (msp430x_adc_cal_t *)(tlv_addr + 2);
+ }
+ else if (*tlv_addr == TLV_REFCAL) {
+ adcp->ref_cal = (msp430x_ref_cal_t *)(tlv_addr + 2);
+ }
+ tlv_addr += (tlv_addr[1] + 2);
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+PORT_IRQ_HANDLER(ADC12_VECTOR) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ switch (__even_in_range(ADC12IV, ADC12IV_ADC12TOVIFG)) {
+
+ case ADC12IV_ADC12OVIFG: {
+ if (ADCD1.grpp == NULL)
+ break;
+ _adc_isr_error_code(&ADCD1, ADC_ERR_OVERFLOW);
+ break;
+ }
+ case ADC12IV_ADC12TOVIFG: {
+ if (ADCD1.grpp == NULL)
+ break;
+ _adc_isr_error_code(&ADCD1, ADC_ERR_AWD);
+ break;
+ }
+ default:
+ osalDbgAssert(false, "unhandled ADC exception");
+ _adc_isr_error_code(&ADCD1, ADC_ERR_UNKNOWN);
+ }
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level ADC driver initialization.
+ *
+ * @notapi
+ */
+void adc_lld_init(void) {
+
+#if MSP430X_ADC_USE_ADC1 == TRUE
+ /* Driver initialization.*/
+ adcObjectInit(&ADCD1);
+ ADCD1.regs = (msp430x_adc_reg_t *)(&ADC12CTL0);
+ populate_tlv(&ADCD1);
+#endif
+}
+
+/**
+ * @brief Configures and activates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start(ADCDriver * adcp) {
+
+ if (adcp->state == ADC_STOP) {
+ /* Enables the peripheral.*/
+ adcp->regs->ctl[0] = ADC12ON | ADC12MSC;
+ adcp->regs->ctl[1] =
+ MSP430X_ADC1_PDIV | MSP430X_ADC1_DIV | MSP430X_ADC1_SSEL | ADC12SHP;
+ adcp->regs->ctl[3] = ADC12ICH3MAP | ADC12ICH2MAP | ADC12ICH1MAP |
+ ADC12ICH0MAP | ADC12TCMAP | ADC12BATMAP;
+ adcp->regs->ier[2] = ADC12TOVIE | ADC12OVIE;
+ adcp->req.trigger = DMA_TRIGGER_MNEM(ADC12IFG);
+#if MSP430X_ADC_COMPACT_SAMPLES == TRUE
+ adcp->req.data_mode = MSP430X_DMA_SRCWORD | MSP430X_DMA_DSTBYTE;
+#else
+ adcp->req.data_mode = MSP430X_DMA_SRCWORD | MSP430X_DMA_DSTWORD;
+#endif
+ adcp->req.addr_mode = MSP430X_DMA_SRCINCR | MSP430X_DMA_DSTINCR;
+ adcp->req.transfer_mode = MSP430X_DMA_SINGLE;
+ adcp->req.callback.callback = dma_callback;
+ adcp->req.callback.args = adcp;
+
+#if MSP430X_ADC_EXCLUSIVE_DMA == TRUE
+ bool b;
+ if (adcp->config->dma_index < MSP430X_DMA_CHANNELS) {
+ b = dmaAcquireI(&adcp->dma, adcp->config->dma_index);
+ osalDbgAssert(!b, "stream already allocated");
+ }
+ else {
+#endif
+ adcp->dma.registers = NULL;
+#if MSP430X_ADC_EXCLUSIVE_DMA == TRUE
+ }
+#endif
+ }
+ /* Configures the peripheral.*/
+}
+
+/**
+ * @brief Deactivates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop(ADCDriver * adcp) {
+
+ if (adcp->state == ADC_READY) {
+/* Resets the peripheral.*/
+
+/* Disables the peripheral.*/
+#if MSP430X_ADC_EXCLUSIVE_DMA == TRUE
+ if (adcp->config->dma_index < MSP430X_DMA_CHANNELS) {
+ dmaRelease(&(adcp->dma));
+ }
+#endif
+ adcp->regs->ctl[0] = 0;
+ }
+}
+
+/**
+ * @brief Starts an ADC conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start_conversion(ADCDriver * adcp) {
+
+ /* always use sequential transfer mode - this is fine */
+ adcp->regs->ctl[1] |= ADC12CONSEQ0;
+
+ /* set resolution */
+ adcp->regs->ctl[2] |= adcp->grpp->res;
+ /* start from MEM0 */
+ adcp->regs->ctl[3] &= ~(ADC12CSTARTADD_31);
+
+ /* Configure voltage reference */
+ while (REFCTL0 & REFGENBUSY)
+ ;
+ REFCTL0 = adcp->grpp->vref_src;
+
+ for (int i = 0; i < adcp->grpp->num_channels; i++) {
+ osalDbgAssert(adcp->grpp->channels[i] < 32, "invalid channel number");
+ adcp->regs->mctl[i] = adcp->grpp->ref | adcp->grpp->channels[i];
+ }
+
+ adcp->regs->mctl[adcp->grpp->num_channels - 1] |= ADC12EOS;
+
+ adcp->req.source_addr = adcp->regs->mem;
+ adcp->req.dest_addr = adcp->samples;
+ adcp->req.size = adcp->grpp->num_channels;
+ adcp->count = 0;
+
+/* TODO timeouts? */
+#if MSP430X_ADC_EXCLUSIVE_DMA == TRUE
+ if (adcp->config->dma_index >= MSP430X_DMA_CHANNELS) {
+ adcp->dma.index = dmaRequestS(&(adcp->req), TIME_INFINITE);
+ }
+ else {
+ dmaTransfer(&(adcp->dma), &(adcp->req));
+ }
+#else
+ adcp->dma.index = dmaRequestS(&(adcp->req), TIME_INFINITE);
+#endif
+
+ adcp->regs->ctl[0] |= adcp->grpp->rate | ADC12MSC | ADC12ENC | ADC12SC;
+}
+
+/**
+ * @brief Stops an ongoing conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop_conversion(ADCDriver * adcp) {
+
+ /* TODO stop DMA transfers here */
+ adcp->regs->ctl[0] &= ~(ADC12ENC | ADC12SC);
+
+#if MSP430X_ADC_EXCLUSIVE_DMA == TRUE
+ if (adcp->config->dma_index >= MSP430X_DMA_CHANNELS) {
+#endif
+ if (adcp->dma.registers != NULL) {
+ dmaRelease(&(adcp->dma));
+ adcp->dma.registers = NULL;
+ }
+#if MSP430X_ADC_EXCLUSIVE_DMA == TRUE
+ }
+#endif
+}
+
+adcsample_t adcMSP430XAdjustResult(ADCConversionGroup * grpp,
+ adcsample_t sample) {
+ uint32_t tmp;
+ uint16_t fact;
+ if (grpp->ref == MSP430X_ADC_VSS_VREF_BUF ||
+ grpp->ref == MSP430X_ADC_VEREF_P_VREF_BUF ||
+ grpp->ref == MSP430X_ADC_VREF_BUF_VCC ||
+ grpp->ref == MSP430X_ADC_VREF_BUF_VEREF_P ||
+ grpp->ref == MSP430X_ADC_VEREF_N_VREF_BUF) {
+ /* Retrieve proper reference correction factor from TLV */
+ fact = (&(ADCD1.ref_cal->CAL_ADC_12VREF_FACTOR))[grpp->vref_src >> 4];
+ /* Calculate corrected value */
+ tmp = (uint32_t)(sample << 1) * (uint32_t)fact;
+ sample = tmp >> 16;
+ }
+
+ /* Gain correction */
+ fact = ADCD1.adc_cal->CAL_ADC_GAIN_FACTOR;
+ tmp = (uint32_t)(sample << 1) * (uint32_t)fact;
+ sample = tmp >> 16;
+
+ /* Offset correction */
+ sample += ADCD1.adc_cal->CAL_ADC_OFFSET;
+
+ return sample;
+}
+
+adcsample_t adcMSP430XAdjustTemp(ADCConversionGroup * grpp,
+ adcsample_t sample) {
+ uint16_t t30;
+ uint16_t t85;
+
+ /* Retrieve proper T = 30 correction value from TLV */
+ t30 = (&(ADCD1.adc_cal->CAL_ADC_12T30))[grpp->vref_src >> 3];
+ /* Retrieve proper T = 85 correction value from TLV */
+ t85 = (&(ADCD1.adc_cal->CAL_ADC_12T30))[(grpp->vref_src >> 3) + 1];
+
+ return ((((int32_t)sample - (int32_t)t30) * (85 - 30)) / (t85 - t30)) + 30;
+}
+
+#endif /* HAL_USE_ADC == TRUE */
+
+/** @} */
diff --git a/os/hal/ports/MSP430X/hal_adc_lld.h b/os/hal/ports/MSP430X/hal_adc_lld.h new file mode 100644 index 0000000..1cca36b --- /dev/null +++ b/os/hal/ports/MSP430X/hal_adc_lld.h @@ -0,0 +1,516 @@ +/*
+ ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file hal_adc_lld.h
+ * @brief MSP430X ADC subsystem low level driver header.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#ifndef HAL_ADC_LLD_H
+#define HAL_ADC_LLD_H
+
+#if (HAL_USE_ADC == TRUE) || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @name Sampling rates
+ * @{
+ */
+typedef enum {
+ MSP430X_ADC_SHT_4 = 0x0000,
+ MSP430X_ADC_SHT_8 = 0x1100,
+ MSP430X_ADC_SHT_16 = 0x2200,
+ MSP430X_ADC_SHT_32 = 0x3300,
+ MSP430X_ADC_SHT_64 = 0x4400,
+ MSP430X_ADC_SHT_96 = 0x5500,
+ MSP430X_ADC_SHT_128 = 0x6600,
+ MSP430X_ADC_SHT_192 = 0x7700,
+ MSP430X_ADC_SHT_256 = 0x8800,
+ MSP430X_ADC_SHT_384 = 0x9900,
+ MSP430X_ADC_SHT_512 = 0xAA00
+} MSP430XADCSampleRates;
+/** @} */
+
+/**
+ * @name Resolution
+ * @{
+ */
+typedef enum {
+ MSP430X_ADC_RES_8BIT = 0x0000,
+ MSP430X_ADC_RES_10BIT = 0x0010,
+ MSP430X_ADC_RES_12BIT = 0x0020
+} MSP430XADCResolution;
+/** @} */
+
+/**
+ * @name References
+ * @{
+ */
+typedef enum {
+ MSP430X_ADC_VSS_VCC = 0x0000,
+ MSP430X_ADC_VSS_VREF_BUF = 0x0100,
+ MSP430X_ADC_VSS_VEREF_N = 0x0200,
+ MSP430X_ADC_VSS_VEREF_P_BUF = 0x0300,
+ MSP430X_ADC_VSS_VEREF_P = 0x0400,
+ MSP430X_ADC_VEREF_P_BUF_VCC = 0x0500,
+ MSP430X_ADC_VEREF_P_VCC = 0x0600,
+ MSP430X_ADC_VEREF_P_VREF_BUF = 0x0700,
+ MSP430X_ADC_VREF_BUF_VCC = 0x0900,
+ MSP430X_ADC_VREF_BUF_VEREF_P = 0x0B00,
+ MSP430X_ADC_VEREF_N_VCC = 0x0C00,
+ MSP430X_ADC_VEREF_N_VREF_BUF = 0x0D00,
+ MSP430X_ADC_VEREF_N_VEREF_P = 0x0E00,
+ MSP430X_ADC_VEREF_N_VEREF_P_BUF = 0x0F00
+} MSP430XADCReferences;
+
+typedef enum {
+ MSP430X_REF_1V2 = 0x0000,
+ MSP430X_REF_2V0 = 0x0010,
+ MSP430X_REF_2V5 = 0x0020,
+ MSP430X_REF_1V2_EXT = 0x0002,
+ MSP430X_REF_2V0_EXT = 0x0012,
+ MSP430X_REF_2V5_EXT = 0x0022
+} MSP430XREFSources;
+
+#define MSP430X_REF_NONE MSP430X_REF_1V2
+
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name MSP430X configuration options
+ * @{
+ */
+/**
+ * @brief Stores ADC samples in an 8 bit integer.
+ * @note 10 and 12 bit sampling modes must not be used when this option is
+ * enabled.
+ */
+#if !defined(MSP430X_ADC_COMPACT_SAMPLES) || defined(__DOXYGEN__)
+#define MSP430X_ADC_COMPACT_SAMPLES FALSE
+#endif
+
+/**
+ * @brief ADC1 driver enable switch.
+ * @details If set to @p TRUE the support for ADC1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(MSP430X_ADC_USE_ADC1) || defined(__DOXYGEN__)
+#define MSP430X_ADC_USE_ADC1 TRUE
+#endif
+
+/**]
+ * @brief Exclusive DMA enable switch.
+ * @details If set to @p TRUE the support for exclusive DMA is included.
+ * @note This increases the size of the compiled executable somewhat.
+ * @note The default is @p FALSE.
+ */
+#if !defined(MSP430X_ADC_EXCLUSIVE_DMA) || defined(__DOXYGEN__)
+#define MSP430X_ADC_EXCLUSIVE_DMA FALSE
+#endif
+
+#if MSP430X_ADC_USE_ADC1
+
+/**
+ * @brief ADC1 clock source configuration
+ */
+#if !defined(MSP430X_ADC1_CLK_SRC)
+#define MSP430X_ADC1_CLK_SRC MSP430X_MODCLK
+#endif
+
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if MSP430X_ADC_USE_ADC1
+
+#if !defined(__MSP430_HAS_ADC12_B__)
+#error "No ADC present or ADC version not supported"
+#endif
+
+#if (MSP430X_ADC1_CLK_SRC == MSP430X_MODCLK)
+#define MSP430X_ADC1_CLK_FREQ MSP430X_MODCLK_FREQ
+#define MSP430X_ADC1_SSEL ADC12SSEL_0
+#elif (MSP430X_ADC1_CLK_SRC == MSP430X_ACLK)
+#define MSP430X_ADC1_CLK_FREQ MSP430X_ACLK_FREQ
+#define MSP430X_ADC1_SSEL ADC12SSEL_1
+#elif (MSP430X_ADC1_CLK_SRC == MSP430X_MCLK)
+#define MSP$30X_ADC1_CLK_FREQ MSP430X_MCLK_FREQ
+#define MSP430X_ADC1_SSEL ADC12SSEL_2
+#elif (MSP430X_ADC1_CLK_SRC == MSP430SMCLK)
+#define MSP430X_ADC1_CLK_FREQ MSP430X_SMCLK_FREQ
+#define MSP430X_ADC1_SSEL ADC12SSEL_3
+#else
+#error "Invalid ADC1 clock source requested!"
+#endif
+
+#if !defined(MSP430X_ADC1_FREQ)
+#warning "ADC clock frequency not defined - assuming 1 for all dividers"
+#define MSP430X_ADC1_DIV_CALC(x) (x == 1)
+#else
+#define MSP430X_ADC1_DIV_CALC(x) \
+ ((MSP430X_ADC1_CLK_FREQ / x) == MSP430X_ADC1_FREQ)
+#endif
+
+/**
+ * @brief ADC1 prescaler calculations
+ */
+#if MSP430X_ADC1_DIV_CALC(1)
+#define MSP430X_ADC1_PDIV ADC12PDIV__1
+#define MSP430X_ADC1_DIV ADC12DIV_0
+#elif MSP430X_ADC1_DIV_CALC(2)
+#define MSP430X_ADC1_PDIV ADC12PDIV__1
+#define MSP430X_ADC1_DIV ADC12DIV_1
+#elif MSP430X_ADC1_DIV_CALC(3)
+#define MSP430X_ADC1_PDIV ADC12PDIV__1
+#define MSP430X_ADC1_DIV ADC12DIV_2
+#elif MSP430X_ADC1_DIV_CALC(4)
+#define MSP430X_ADC1_PDIV ADC12PDIV__4
+#define MSP430X_ADC1_DIV ADC12DIV_0
+#elif MSP430X_ADC1_DIV_CALC(5)
+#define MSP430X_ADC1_PDIV ADC12PDIV__1
+#define MSP430X_ADC1_DIV ADC12DIV_4
+#elif MSP430X_ADC1_DIV_CALC(6)
+#define MSP430X_ADC1_PDIV ADC12PDIV__1
+#define MSP430X_ADC1_DIV ADC12DIV_5
+#elif MSP430X_ADC1_DIV_CALC(7)
+#define MSP430X_ADC1_PDIV ADC12PDIV__1
+#define MSP430X_ADC1_DIV ADC12DIV_6
+#elif MSP430X_ADC1_DIV_CALC(8)
+#define MSP430X_ADC1_PDIV ADC12PDIV__4
+#define MSP430X_ADC1_DIV ADC12DIV_2
+#elif MSP430X_ADC1_DIV_CALC(12)
+#define MSP430X_ADC1_PDIV ADC12PDIV__4
+#define MSP430X_ADC1_DIV ADC12DIV_2
+#elif MSP430X_ADC1_DIV_CALC(16)
+#define MSP430X_ADC1_PDIV ADC12PDIV__4
+#define MSP430X_ADC1_DIV ADC12DIV_3
+#elif MSP430X_ADC1_DIV_CALC(20)
+#define MSP430X_ADC1_PDIV ADC12PDIV__4
+#define MSP430X_ADC1_DIV ADC12DIV_4
+#elif MSP430X_ADC1_DIV_CALC(24)
+#define MSP430X_ADC1_PDIV ADC12PDIV__4
+#define MSP430X_ADC1_DIV ADC12DIV_5
+#elif MSP430X_ADC1_DIV_CALC(28)
+#define MSP430X_ADC1_PDIV ADC12PDIV__4
+#define MSP430X_ADC1_DIV ADC12DIV_6
+#elif MSP430X_ADC1_DIV_CALC(32)
+#define MSP430X_ADC1_PDIV ADC12PDIV__32
+#define MSP430X_ADC1_DIV ADC12DIV_0
+#elif MSP430X_ADC1_DIV_CALC(64)
+#define MSP430X_ADC1_PDIV ADC12PDIV__64
+#define MSP430X_ADC1_DIV ADC12DIV_0
+#elif MSP430X_ADC1_DIV_CALC(96)
+#define MSP430X_ADC1_PDIV ADC12PDIV__32
+#define MSP430X_ADC1_DIV ADC12DIV_2
+#elif MSP430X_ADC1_DIV_CALC(128)
+#define MSP430X_ADC1_PDIV ADC12PDIV__64
+#define MSP430X_ADC1_DIV ADC12DIV_1
+#elif MSP430X_ADC1_DIV_CALC(160)
+#define MSP430X_ADC1_PDIV ADC12PDIV__32
+#define MSP430X_ADC1_DIV ADC12DIV_4
+#elif MSP430X_ADC1_DIV_CALC(192)
+#define MSP430X_ADC1_PDIV ADC12PDIV__64
+#define MSP430X_ADC1_DIV ADC12DIV_2
+#elif MSP430X_ADC1_DIV_CALC(224)
+#define MSP430X_ADC1_PDIV ADC12PDIV__32
+#define MSP430X_ADC1_DIV ADC12DIV_6
+#elif MSP430X_ADC1_DIV_CALC(256)
+#define MSP430X_ADC1_PDIV ADC12PDIV__64
+#define MSP430X_ADC1_DIV ADC12DIV_3
+#elif MSP430X_ADC1_DIV_CALC(320)
+#define MSP430X_ADC1_PDIV ADC12PDIV__64
+#define MSP430X_ADC1_DIV ADC12DIV_4
+#elif MSP430X_ADC1_DIV_CALC(384)
+#define MSP430X_ADC1_PDIV ADC12PDIV__64
+#define MSP430X_ADC1_DIV ADC12DIV_5
+#elif MSP430X_ADC1_DIV_CALC(448)
+#define MSP430X_ADC1_PDIV ADC12PDIV__64
+#define MSP430X_ADC1_DIV ADC12DIV_6
+#elif MSP430X_ADC1_DIV_CALC(512)
+#define MSP430X_ADC1_PDIV ADC12PDIV__64
+#define MSP430X_ADC1_DIV ADC12DIV_7
+#else
+#error "MSP430X_ADC1_FREQ not achievable with MSP430X_ADC1_CLK_SRC"
+#endif
+
+#endif /* MSP430X_ADC_USE_ADC1 */
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief ADC sample data type.
+ */
+#if !MSP430X_ADC_COMPACT_SAMPLES || defined(__DOXYGEN__)
+typedef uint16_t adcsample_t;
+#else
+typedef uint8_t adcsample_t;
+#endif
+
+/**
+ * @brief Channels number in a conversion group.
+ */
+typedef uint8_t adc_channels_num_t;
+
+/**
+ * @brief Possible ADC failure causes.
+ * @note Error codes are architecture dependent and should not relied
+ * upon.
+ */
+typedef enum {
+ ADC_ERR_UNKNOWN = 0, /**< Unknown error has occurred */
+ ADC_ERR_OVERFLOW = 1, /**< ADC overflow condition. */
+ ADC_ERR_AWD = 2 /**< Analog watchdog triggered. */
+} adcerror_t;
+
+/**
+ * @brief Type of a structure representing an ADC driver.
+ */
+typedef struct ADCDriver ADCDriver;
+
+/**
+ * @brief ADC notification callback type.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object triggering the
+ * callback
+ * @param[in] buffer pointer to the most recent samples data
+ * @param[in] n number of buffer rows available starting from @p buffer
+ */
+typedef void (*adccallback_t)(ADCDriver * adcp, adcsample_t * buffer, size_t n);
+
+/**
+ * @brief ADC error callback type.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object triggering the
+ * callback
+ * @param[in] err ADC error code
+ */
+typedef void (*adcerrorcallback_t)(ADCDriver * adcp, adcerror_t err);
+
+/**
+ * @brief MSP430X ADC register structure.
+ */
+typedef struct {
+ uint16_t ctl[4];
+ uint16_t lo;
+ uint16_t hi;
+ uint16_t ifgr[3];
+ uint16_t ier[3];
+ uint16_t iv;
+ uint16_t padding[3];
+ uint16_t mctl[32];
+ uint16_t mem[32];
+} msp430x_adc_reg_t;
+
+/**
+ * @brief MSP430X ADC calibration structure.
+ */
+typedef struct {
+ uint16_t CAL_ADC_GAIN_FACTOR;
+ uint16_t CAL_ADC_OFFSET;
+ uint16_t CAL_ADC_12T30;
+ uint16_t CAL_ADC_12T85;
+ uint16_t CAL_ADC_20T30;
+ uint16_t CAL_ADC_20T85;
+ uint16_t CAL_ADC_25T30;
+ uint16_t CAL_ADC_25T85;
+} msp430x_adc_cal_t;
+
+/**
+ * @brief MSP430X REF calibration structure.
+ */
+typedef struct {
+ uint16_t CAL_ADC_12VREF_FACTOR;
+ uint16_t CAL_ADC_20VREF_FACTOR;
+ uint16_t CAL_ADC_25VREF_FACTOR;
+} msp430x_ref_cal_t;
+
+/**
+ * @brief Conversion group configuration structure.
+ * @details This implementation-dependent structure describes a conversion
+ * operation.
+ * @note The use of this configuration structure requires knowledge of
+ * MSP430X ADC cell registers interface, please refer to the MSP430X
+ * reference manual for details.
+ */
+typedef struct {
+ /**
+ * @brief Enables the circular buffer mode for the group.
+ */
+ bool circular;
+ /**
+ * @brief Number of the analog channels belonging to the conversion group.
+ */
+ adc_channels_num_t num_channels;
+ /**
+ * @brief Callback function associated to the group or @p NULL.
+ */
+ adccallback_t end_cb;
+ /**
+ * @brief Error callback or @p NULL.
+ */
+ adcerrorcallback_t error_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Sequence of analog channels belonging to the conversion group.
+ * @note Only the first num_channels are valid.
+ */
+ uint8_t channels[32];
+ /**
+ * @brief Sample resolution
+ */
+ MSP430XADCResolution res;
+ /**
+ * @brief Sampling time in clock cycles
+ */
+ MSP430XADCSampleRates rate;
+ /**
+ * @brief Voltage references to use
+ */
+ MSP430XADCReferences ref;
+ /**
+ * @brief VREF source
+ */
+ MSP430XREFSources vref_src;
+} ADCConversionGroup;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+#if MSP430X_ADC_EXCLUSIVE_DMA == TRUE || defined(__DOXYGEN__)
+ /**
+ * @brief The index of the DMA channel.
+ * @note This may be >MSP430X_DMA_CHANNELS to indicate that exclusive DMA
+ * is not used.
+ */
+ uint8_t dma_index;
+#endif
+} ADCConfig;
+
+/**
+ * @brief Structure representing an ADC driver.
+ */
+struct ADCDriver {
+ /**
+ * @brief Driver state.
+ */
+ adcstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const ADCConfig * config;
+ /**
+ * @brief Current samples buffer pointer or @p NULL.
+ */
+ adcsample_t * samples;
+ /**
+ * @brief Current samples buffer depth or @p 0.
+ */
+ size_t depth;
+ /**
+ * @brief Current conversion group pointer or @p NULL.
+ */
+ const ADCConversionGroup * grpp;
+#if (ADC_USE_WAIT == TRUE) || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ thread_reference_t thread;
+#endif
+#if (ADC_USE_MUTUAL_EXCLUSION == TRUE) || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the peripheral.
+ */
+ mutex_t mutex;
+#endif
+#if defined(ADC_DRIVER_EXT_FIELDS)
+ ADC_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Base address of ADC12_B registers
+ */
+ msp430x_adc_reg_t * regs;
+ /**
+ * @brief DMA request structure
+ */
+ msp430x_dma_req_t req;
+ /**
+ * @brief ADC calibration structure from TLV
+ */
+ msp430x_adc_cal_t * adc_cal;
+ /**
+ * @brief REF calibration structure from TLV
+ */
+ msp430x_ref_cal_t * ref_cal;
+ /**
+ * @brief Count of times DMA callback has been called
+ */
+ uint8_t count;
+ /**
+ * @brief DMA stream
+ */
+ msp430x_dma_ch_t dma;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if (MSP430X_ADC_USE_ADC1 == TRUE) && !defined(__DOXYGEN__)
+extern ADCDriver ADCD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+void adc_lld_init(void);
+void adc_lld_start(ADCDriver * adcp);
+void adc_lld_stop(ADCDriver * adcp);
+void adc_lld_start_conversion(ADCDriver * adcp);
+void adc_lld_stop_conversion(ADCDriver * adcp);
+adcsample_t adcMSP430XAdjustResult(ADCConversionGroup * grpp,
+ adcsample_t sample);
+adcsample_t adcMSP430XAdjustTemp(ADCConversionGroup * grpp, adcsample_t sample);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_ADC == TRUE */
+
+#endif /* HAL_ADC_LLD_H */
+
+/** @} */
diff --git a/os/hal/ports/MSP430X/hal_dma_lld.c b/os/hal/ports/MSP430X/hal_dma_lld.c index 43e1d6c..82bf39f 100644 --- a/os/hal/ports/MSP430X/hal_dma_lld.c +++ b/os/hal/ports/MSP430X/hal_dma_lld.c @@ -44,9 +44,8 @@ static msp430x_dma_ch_reg_t * const dma_channels = (msp430x_dma_ch_reg_t *)&DMA0CTL;
static msp430x_dma_cb_t callbacks[MSP430X_DMA_CHANNELS];
-#if CH_CFG_USE_SEMAPHORES
-static semaphore_t dma_lock;
-#endif
+static threads_queue_t dma_queue;
+static unsigned int queue_length;
/*===========================================================================*/
/* Driver local functions. */
@@ -88,9 +87,9 @@ PORT_IRQ_HANDLER(DMA_VECTOR) { index = (DMAIV >> 1) - 1;
if (index < MSP430X_DMA_CHANNELS) {
-#if CH_CFG_USE_SEMAPHORES
- chSemSignalI(&dma_lock);
-#endif
+ osalSysLockFromISR();
+ osalThreadDequeueNextI(&dma_queue, MSG_OK);
+ osalSysUnlockFromISR();
msp430x_dma_cb_t * cb = &callbacks[index];
@@ -113,9 +112,7 @@ PORT_IRQ_HANDLER(DMA_VECTOR) { * @init
*/
void dmaInit(void) {
-#if CH_CFG_USE_SEMAPHORES
- chSemObjectInit(&dma_lock, MSP430X_DMA_CHANNELS);
-#endif
+ osalThreadQueueObjectInit(&dma_queue);
}
/**
@@ -125,134 +122,124 @@ void dmaInit(void) { * semaphores are enabled, the calling thread will sleep until a
* channel is available or the request times out. If semaphores are
* disabled, the calling thread will busy-wait instead of sleeping.
+ *
+ * @sclass
*/
-bool dmaRequest(msp430x_dma_req_t * request, systime_t timeout) {
-/* Check if a DMA channel is available */
-#if CH_CFG_USE_SEMAPHORES
- msg_t semresult = chSemWaitTimeout(&dma_lock, timeout);
- if (semresult != MSG_OK)
- return true;
-#endif
-
-#if !(CH_CFG_USE_SEMAPHORES)
- systime_t start = chVTGetSystemTimeX();
-
- do {
-#endif
- /* Grab the correct DMA channel to use */
- int i = 0;
- for (i = 0; i < MSP430X_DMA_CHANNELS; i++) {
- if (!(dma_channels[i].ctl & DMAEN)) {
- break;
- }
- }
-#if !(CH_CFG_USE_SEMAPHORES)
- while (chVTTimeElapsedSinceX(start) < timeout)
- ;
-#endif
-
-#if !(CH_CFG_USE_SEMAPHORES)
- if (i == MSP430X_DMA_CHANNELS) {
- return true;
+int dmaRequestS(msp430x_dma_req_t * request, systime_t timeout) {
+
+ osalDbgCheckClassS();
+
+ /* Check if a DMA channel is available */
+ if (queue_length >= MSP430X_DMA_CHANNELS) {
+ msg_t queueresult = osalThreadEnqueueTimeoutS(&dma_queue, timeout);
+ if (queueresult != MSG_OK)
+ return -1;
+ }
+
+ /* Grab the correct DMA channel to use */
+ int i = 0;
+ for (i = 0; i < MSP430X_DMA_CHANNELS; i++) {
+ if (!(dma_channels[i].ctl & DMAEN)) {
+ break;
}
-#endif
+ }
+
+ /* Make the request */
+ init_request(request, i);
+
+ return i;
+}
- /* Make the request */
- init_request(request, i);
+/**
+ * @brief Acquires exclusive control of a DMA channel.
+ * @pre The channel must not be already acquired or an error is returned.
+ * @note If the channel is in use by the DMA engine, blocks until acquired.
+ * @post This channel must be interacted with using only the functions
+ * defined in this module.
+ *
+ * @param[out] channel The channel handle. Must be pre-allocated.
+ * @param[in] index The index of the channel (< MSP430X_DMA_CHANNELS).
+ * @return The operation status.
+ * @retval false no error, channel acquired.
+ * @retval true error, channel already acquired.
+ *
+ * @iclass
+ */
+bool dmaAcquireI(msp430x_dma_ch_t * channel, uint8_t index) {
+
+ osalDbgCheckClassI();
- return false;
+ /* Is the channel already acquired? */
+ osalDbgAssert(index < MSP430X_DMA_CHANNELS, "invalid channel index");
+ if (dma_channels[index].ctl & DMADT_4) {
+ return true;
}
- /**
- * @brief Acquires exclusive control of a DMA channel.
- * @pre The channel must not be already acquired or an error is returned.
- * @note If the channel is in use by the DMA engine, blocks until acquired.
- * @post This channel must be interacted with using only the functions
- * defined in this module.
- *
- * @param[out] channel The channel handle. Must be pre-allocated.
- * @param[in] index The index of the channel (< MSP430X_DMA_CHANNELS).
- * @return The operation status.
- * @retval false no error, channel acquired.
- * @retval true error, channel already acquired.
- */
- bool dmaAcquire(msp430x_dma_ch_t * channel, uint8_t index) {
- /* Acquire the channel in an idle mode */
-
- /* Is the channel already acquired? */
- osalDbgAssert(index < MSP430X_DMA_CHANNELS, "invalid channel index");
- if (dma_channels[index].ctl & DMADT_4) {
- return true;
- }
+ /* Increment the DMA counter */
+ queue_length++;
-/* Increment the DMA counter */
-#if CH_CFG_USE_SEMAPHORES
- msg_t semresult = chSemWait(&dma_lock);
- if (semresult != MSG_OK)
- return true;
-#endif
+ while (dma_channels[index].ctl & DMAEN)
+ ;
- while (dma_channels[index].ctl & DMAEN)
- ;
+ /* Acquire the channel in an idle mode */
+ dma_trigger_set(index, DMA_TRIGGER_MNEM(DMAREQ));
+ dma_channels[index].sz = 0;
+ dma_channels[index].ctl = DMAEN | DMAABORT | DMADT_4;
- dma_trigger_set(index, DMA_TRIGGER_MNEM(DMAREQ));
- dma_channels[index].sz = 0;
- dma_channels[index].ctl = DMAEN | DMAABORT | DMADT_4;
+ channel->registers = dma_channels + index;
+ channel->index = index;
+ channel->cb = callbacks + index;
+
+ return false;
+}
- channel->registers = dma_channels + index;
- channel->index = index;
- channel->cb = callbacks + index;
+/**
+ * @brief Initiates a DMA transfer operation using an acquired channel.
+ * @pre The channel must have been acquired using @p dmaAcquire().
+ *
+ * @param[in] channel pointer to a DMA channel from @p dmaAcquire().
+ * @param[in] request pointer to a DMA request object.
+ */
+void dmaTransfer(msp430x_dma_ch_t * channel, msp430x_dma_req_t * request) {
- return false;
- }
+ dma_trigger_set(channel->index, request->trigger);
+ /**(channel->ctl) = request->trigger;*/
- /**
- * @brief Initiates a DMA transfer operation using an acquired channel.
- * @pre The channel must have been acquired using @p dmaAcquire().
- *
- * @param[in] channel pointer to a DMA channel from @p dmaAcquire().
- * @param[in] request pointer to a DMA request object.
- */
- void dmaTransfer(msp430x_dma_ch_t * channel, msp430x_dma_req_t * request) {
-
- dma_trigger_set(channel->index, request->trigger);
- /**(channel->ctl) = request->trigger;*/
-
- channel->cb->callback = request->callback.callback;
- channel->cb->args = request->callback.args;
-
- chSysLock();
- channel->registers->ctl &= (~DMAEN);
- channel->registers->sa = (uintptr_t)request->source_addr;
- channel->registers->da = (uintptr_t)request->dest_addr;
- channel->registers->sz = request->size;
- channel->registers->ctl = DMAIE | request->data_mode | request->addr_mode |
- request->transfer_mode | DMADT_4 | DMAEN |
- DMAREQ; /* repeated transfers */
- chSysUnlock();
- }
+ channel->cb->callback = request->callback.callback;
+ channel->cb->args = request->callback.args;
- /**
- * @brief Releases exclusive control of a DMA channel.
- * @details The channel is released from control and returned to the DMA
- * engine
- * pool. Trying to release an unallocated channel is an illegal
- * operation and is trapped if assertions are enabled.
- * @pre The channel must have been acquired using @p dmaAcquire().
- * @post The channel is returned to the DMA engine pool.
- */
- void dmaRelease(msp430x_dma_ch_t * channel) {
-
- osalDbgCheck(channel != NULL);
-
- /* Release the channel in an idle mode */
- channel->registers->ctl = DMAABORT;
-
-/* release the DMA counter */
-#if CH_CFG_USE_SEMAPHORES
- chSemSignal(&dma_lock);
-#endif
- }
+ channel->registers->ctl &= (~DMAEN);
+ channel->registers->sa = (uintptr_t)request->source_addr;
+ channel->registers->da = (uintptr_t)request->dest_addr;
+ channel->registers->sz = request->size;
+ channel->registers->ctl = DMAIE | request->data_mode | request->addr_mode |
+ request->transfer_mode | DMADT_4 | DMAEN |
+ DMAREQ; /* repeated transfers */
+}
+
+/**
+ * @brief Releases exclusive control of a DMA channel.
+ * @details The channel is released from control and returned to the DMA
+ * engine
+ * pool. Trying to release an unallocated channel is an illegal
+ * operation and is trapped if assertions are enabled.
+ * @pre The channel must have been acquired using @p dmaAcquire().
+ * @post The channel is returned to the DMA engine pool.
+ */
+void dmaRelease(msp430x_dma_ch_t * channel) {
+ syssts_t sts;
+
+ sts = osalSysGetStatusAndLockX();
+ osalDbgCheck(channel != NULL);
+
+ /* Release the channel in an idle mode */
+ channel->registers->ctl = DMAABORT;
+
+ /* release the DMA counter */
+ osalThreadDequeueAllI(&dma_queue, MSG_RESET);
+ queue_length = 0;
+ osalSysRestoreStatusX(sts);
+}
#endif /* HAL_USE_DMA == TRUE */
diff --git a/os/hal/ports/MSP430X/hal_dma_lld.h b/os/hal/ports/MSP430X/hal_dma_lld.h index d1495d2..f558e78 100644 --- a/os/hal/ports/MSP430X/hal_dma_lld.h +++ b/os/hal/ports/MSP430X/hal_dma_lld.h @@ -159,8 +159,8 @@ typedef struct { extern "C" {
#endif
void dmaInit(void);
-bool dmaRequest(msp430x_dma_req_t * request, systime_t timeout);
-bool dmaAcquire(msp430x_dma_ch_t * channel, uint8_t index);
+int dmaRequestS(msp430x_dma_req_t * request, systime_t timeout);
+bool dmaAcquireI(msp430x_dma_ch_t * channel, uint8_t index);
void dmaTransfer(msp430x_dma_ch_t * channel, msp430x_dma_req_t * request);
void dmaRelease(msp430x_dma_ch_t * channel);
diff --git a/os/hal/ports/MSP430X/hal_lld.c b/os/hal/ports/MSP430X/hal_lld.c index 872fe97..812a0cf 100644 --- a/os/hal/ports/MSP430X/hal_lld.c +++ b/os/hal/ports/MSP430X/hal_lld.c @@ -82,6 +82,10 @@ void hal_lld_init(void) { } while (SFRIFG1 & OFIFG);
#endif
CSCTL0_H = 0xFF; /* Lock clock system */
+
+#if (HAL_USE_DMA == TRUE)
+ dmaInit();
+#endif
}
/** @} */
diff --git a/os/hal/ports/MSP430X/hal_lld.h b/os/hal/ports/MSP430X/hal_lld.h index 9549453..62f07e9 100644 --- a/os/hal/ports/MSP430X/hal_lld.h +++ b/os/hal/ports/MSP430X/hal_lld.h @@ -25,6 +25,8 @@ #ifndef _HAL_LLD_H_
#define _HAL_LLD_H_
+#include "hal_dma_lld.h"
+
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
diff --git a/os/hal/ports/MSP430X/hal_serial_lld.c b/os/hal/ports/MSP430X/hal_serial_lld.c index 0d9aa1c..feb00ac 100644 --- a/os/hal/ports/MSP430X/hal_serial_lld.c +++ b/os/hal/ports/MSP430X/hal_serial_lld.c @@ -374,11 +374,11 @@ PORT_IRQ_HANDLER(USCI_A0_VECTOR) { if (oqIsEmptyI(&SD0.oqueue))
chnAddFlagsI(&SD0, CHN_TRANSMISSION_END);
UCA0IE &= ~UCTXCPTIE;
+ osalSysUnlockFromISR();
break;
default: /* other interrupts */
- while (1)
- ;
+ osalDbgAssert(false, "unhandled serial interrupt");
break;
}
@@ -432,11 +432,11 @@ PORT_IRQ_HANDLER(USCI_A1_VECTOR) { if (oqIsEmptyI(&SD1.oqueue))
chnAddFlagsI(&SD1, CHN_TRANSMISSION_END);
UCA1IE &= ~UCTXCPTIE;
+ osalSysUnlockFromISR();
break;
default: /* other interrupts */
- while (1)
- ;
+ osalDbgAssert(false, "unhandled serial interrupt");
break;
}
@@ -490,11 +490,11 @@ PORT_IRQ_HANDLER(USCI_A2_VECTOR) { if (oqIsEmptyI(&SD2.oqueue))
chnAddFlagsI(&SD2, CHN_TRANSMISSION_END);
UCA2IE &= ~UCTXCPTIE;
+ osalSysUnlockFromISR();
break;
default: /* other interrupts */
- while (1)
- ;
+ osalDbgAssert(false, "unhandled serial interrupt");
break;
}
@@ -548,11 +548,11 @@ PORT_IRQ_HANDLER(USCI_A3_VECTOR) { if (oqIsEmptyI(&SD3.oqueue))
chnAddFlagsI(&SD3, CHN_TRANSMISSION_END);
UCA3IE &= ~UCTXCPTIE;
+ osalSysUnlockFromISR();
break;
default: /* other interrupts */
- while (1)
- ;
+ osalDbgAssert(false, "unhandled serial interrupt");
break;
}
diff --git a/os/hal/ports/MSP430X/hal_spi_lld.c b/os/hal/ports/MSP430X/hal_spi_lld.c index 70a357e..3a54b1e 100644 --- a/os/hal/ports/MSP430X/hal_spi_lld.c +++ b/os/hal/ports/MSP430X/hal_spi_lld.c @@ -104,21 +104,21 @@ static uint16_t dummyrx; static void init_transfer(SPIDriver * spip) {
#if MSP430X_SPI_EXCLUSIVE_DMA == TRUE || defined(__DOXYGEN__)
- if (spip->config->dmarx_index > MSP430X_DMA_CHANNELS) {
- dmaRequest(&(spip->rx_req), TIME_INFINITE);
+ if (spip->config->dmarx_index >= MSP430X_DMA_CHANNELS) {
+ dmaRequestS(&(spip->rx_req), TIME_INFINITE);
}
else {
dmaTransfer(&(spip->dmarx), &(spip->rx_req));
}
- if (spip->config->dmatx_index > MSP430X_DMA_CHANNELS) {
- dmaRequest(&(spip->tx_req), TIME_INFINITE);
+ if (spip->config->dmatx_index >= MSP430X_DMA_CHANNELS) {
+ dmaRequestS(&(spip->tx_req), TIME_INFINITE);
}
else {
dmaTransfer(&(spip->dmatx), &(spip->tx_req));
}
#else
- dmaRequest(&(spip->rx_req), TIME_INFINITE);
- dmaRequest(&(spip->tx_req), TIME_INFINITE);
+ dmaRequestS(&(spip->rx_req), TIME_INFINITE);
+ dmaRequestS(&(spip->tx_req), TIME_INFINITE);
#endif
*(spip->ifg) |= UCTXIFG;
@@ -325,11 +325,11 @@ void spi_lld_start(SPIDriver * spip) { /* Claim DMA streams here */
bool b;
if (spip->config->dmatx_index < MSP430X_DMA_CHANNELS) {
- b = dmaAcquire(&(spip->dmatx), spip->config->dmatx_index);
+ b = dmaAcquireI(&(spip->dmatx), spip->config->dmatx_index);
osalDbgAssert(!b, "stream already allocated");
}
if (spip->config->dmarx_index < MSP430X_DMA_CHANNELS) {
- b = dmaAcquire(&(spip->dmarx), spip->config->dmarx_index);
+ b = dmaAcquireI(&(spip->dmarx), spip->config->dmarx_index);
osalDbgAssert(!b, "stream already allocated");
}
#endif /* MSP430X_SPI_EXCLUSIVE_DMA */
@@ -388,10 +388,11 @@ void spi_lld_start(SPIDriver * spip) { spip->regs->ctlw0 = UCSWRST;
spip->regs->brw = brw;
spip->regs->ctlw0 =
- (spip->config->spi_mode << 14) | (spip->config->bit_order << 13) |
+ ((spip->config->spi_mode ^ 0x02) << 14) | (spip->config->bit_order << 13) |
(spip->config->data_size << 12) | (UCMST) |
((spip->config->ss_line ? 0 : 2) << 9) | (UCSYNC) | (ssel) | (UCSTEM);
*(spip->ifg) = 0;
+ spi_lld_unselect(spip);
}
/**
@@ -406,8 +407,12 @@ void spi_lld_stop(SPIDriver * spip) { if (spip->state == SPI_READY) {
/* Disables the peripheral.*/
#if MSP430X_SPI_EXCLUSIVE_DMA == TRUE
- dmaRelease(&(spip->dmatx));
- dmaRelease(&(spip->dmarx));
+ if (spip->config->dmatx_index < MSP430X_DMA_CHANNELS) {
+ dmaRelease(&(spip->dmatx));
+ }
+ if (spip->config->dmarx_index < MSP430X_DMA_CHANNELS) {
+ dmaRelease(&(spip->dmarx));
+ }
#endif
spip->regs->ctlw0 = UCSWRST;
}
@@ -561,15 +566,12 @@ void spi_lld_receive(SPIDriver * spip, size_t n, void * rxbuf) { * @param[in] frame the data frame to send over the SPI bus
* @return The received data frame from the SPI bus.
*/
-uint16_t spi_lld_polled_exchange(SPIDriver * spip, uint16_t frame) {
-
- osalDbgAssert(!(frame & 0xFF00U), "16-bit transfers not supported");
+uint8_t spi_lld_polled_exchange(SPIDriver * spip, uint8_t frame) {
- while (!(*(spip->ifg) & UCTXIFG))
- ;
spip->regs->txbuf = frame;
while (!(*(spip->ifg) & UCRXIFG))
;
+ *(spip->ifg) &= ~(UCRXIFG | UCTXIFG);
return spip->regs->rxbuf;
}
diff --git a/os/hal/ports/MSP430X/hal_spi_lld.h b/os/hal/ports/MSP430X/hal_spi_lld.h index ebf14c8..949a8a0 100644 --- a/os/hal/ports/MSP430X/hal_spi_lld.h +++ b/os/hal/ports/MSP430X/hal_spi_lld.h @@ -118,7 +118,7 @@ * @note This increases the size of the compiled executable somewhat.
* @note The default is @p FALSE.
*/
-#if !defined(MSP430X_SPI_EXCLUSIVE_DMA) | defined(__DOXYGEN__)
+#if !defined(MSP430X_SPI_EXCLUSIVE_DMA) || defined(__DOXYGEN__)
#define MSP430X_SPI_EXCLUSIVE_DMA FALSE
#endif
@@ -630,7 +630,7 @@ extern "C" { const void *txbuf, void *rxbuf);
void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf);
void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf);
- uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame);
+ uint8_t spi_lld_polled_exchange(SPIDriver *spip, uint8_t frame);
#ifdef __cplusplus
}
#endif
diff --git a/os/hal/ports/MSP430X/platform.mk b/os/hal/ports/MSP430X/platform.mk index 832814b..627a2f0 100644 --- a/os/hal/ports/MSP430X/platform.mk +++ b/os/hal/ports/MSP430X/platform.mk @@ -4,7 +4,8 @@ PLATFORMSRC = ${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X/hal_lld.c \ ${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X/hal_serial_lld.c \
${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X/hal_pal_lld.c \
${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X/hal_dma_lld.c \
- ${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X/hal_spi_lld.c
+ ${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X/hal_spi_lld.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X/hal_adc_lld.c
# Required include directories
PLATFORMINC = ${CHIBIOS_CONTRIB}/os/hal/ports/MSP430X
diff --git a/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c b/os/hal/ports/NRF5/LLD/hal_gpt_lld.c index f39470f..20dbcef 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c +++ b/os/hal/ports/NRF5/LLD/hal_gpt_lld.c @@ -15,8 +15,8 @@ */
/**
- * @file NRF51x22/gpt_lld.c
- * @brief NRF51x22 GPT subsystem low level driver source.
+ * @file NRF5/LLD/hal_gpt_lld.c
+ * @brief NRF5 GPT subsystem low level driver source.
*
* @addtogroup GPT
* @{
@@ -30,8 +30,8 @@ /* Driver local definitions. */
/*===========================================================================*/
-#define NRF51_TIMER_PRESCALER_NUM 10
-#define NRF51_TIMER_COMPARE_NUM 4
+#define NRF5_TIMER_PRESCALER_NUM 10
+#define NRF5_TIMER_COMPARE_NUM 4
/*===========================================================================*/
/* Driver exported variables. */
@@ -41,7 +41,7 @@ * @brief GPTD1 driver identifier.
* @note The driver GPTD1 allocates the complex timer TIM1 when enabled.
*/
-#if NRF51_GPT_USE_TIMER0 || defined(__DOXYGEN__)
+#if NRF5_GPT_USE_TIMER0 || defined(__DOXYGEN__)
GPTDriver GPTD1;
#endif
@@ -49,7 +49,7 @@ GPTDriver GPTD1; * @brief GPTD2 driver identifier.
* @note The driver GPTD2 allocates the timer TIM2 when enabled.
*/
-#if NRF51_GPT_USE_TIMER1 || defined(__DOXYGEN__)
+#if NRF5_GPT_USE_TIMER1 || defined(__DOXYGEN__)
GPTDriver GPTD2;
#endif
@@ -57,7 +57,7 @@ GPTDriver GPTD2; * @brief GPTD3 driver identifier.
* @note The driver GPTD3 allocates the timer TIM3 when enabled.
*/
-#if NRF51_GPT_USE_TIMER2 || defined(__DOXYGEN__)
+#if NRF5_GPT_USE_TIMER2 || defined(__DOXYGEN__)
GPTDriver GPTD3;
#endif
@@ -73,19 +73,19 @@ static uint8_t prescaler(uint16_t freq) {
uint8_t i;
static const gptfreq_t frequencies[] = {
- NRF51_GPT_FREQ_16MHZ,
- NRF51_GPT_FREQ_8MHZ,
- NRF51_GPT_FREQ_4MHZ,
- NRF51_GPT_FREQ_2MHZ,
- NRF51_GPT_FREQ_1MHZ,
- NRF51_GPT_FREQ_500KHZ,
- NRF51_GPT_FREQ_250KHZ,
- NRF51_GPT_FREQ_125KHZ,
- NRF51_GPT_FREQ_62500HZ,
- NRF51_GPT_FREQ_31250HZ,
+ NRF5_GPT_FREQ_16MHZ,
+ NRF5_GPT_FREQ_8MHZ,
+ NRF5_GPT_FREQ_4MHZ,
+ NRF5_GPT_FREQ_2MHZ,
+ NRF5_GPT_FREQ_1MHZ,
+ NRF5_GPT_FREQ_500KHZ,
+ NRF5_GPT_FREQ_250KHZ,
+ NRF5_GPT_FREQ_125KHZ,
+ NRF5_GPT_FREQ_62500HZ,
+ NRF5_GPT_FREQ_31250HZ,
};
- for (i = 0; i < NRF51_TIMER_PRESCALER_NUM; i++)
+ for (i = 0; i < NRF5_TIMER_PRESCALER_NUM; i++)
if (freq == frequencies[i])
return i;
@@ -102,6 +102,9 @@ static uint8_t prescaler(uint16_t freq) static void gpt_lld_serve_interrupt(GPTDriver *gptp) {
gptp->tim->EVENTS_COMPARE[gptp->cc_int] = 0;
+#if CORTEX_MODEL >= 4
+ (void)gptp->tim->EVENTS_COMPARE[gptp->cc_int];
+#endif
if (gptp->state == GPT_ONESHOT)
gptp->state = GPT_READY; /* Back in GPT_READY state. */
gptp->config->callback(gptp);
@@ -111,7 +114,7 @@ static void gpt_lld_serve_interrupt(GPTDriver *gptp) { /* Driver interrupt handlers. */
/*===========================================================================*/
-#if NRF51_GPT_USE_TIMER0
+#if NRF5_GPT_USE_TIMER0
/**
* @brief TIMER0 interrupt handler.
*
@@ -125,9 +128,9 @@ OSAL_IRQ_HANDLER(Vector60) { OSAL_IRQ_EPILOGUE();
}
-#endif /* NRF51_GPT_USE_TIMER0 */
+#endif /* NRF5_GPT_USE_TIMER0 */
-#if NRF51_GPT_USE_TIMER1
+#if NRF5_GPT_USE_TIMER1
/**
* @brief TIMER1 interrupt handler.
*
@@ -141,9 +144,9 @@ OSAL_IRQ_HANDLER(Vector64) { OSAL_IRQ_EPILOGUE();
}
-#endif /* NRF51_GPT_USE_TIMER1 */
+#endif /* NRF5_GPT_USE_TIMER1 */
-#if NRF51_GPT_USE_TIMER2
+#if NRF5_GPT_USE_TIMER2
/**
* @brief TIMER2 interrupt handler.
*
@@ -157,7 +160,7 @@ OSAL_IRQ_HANDLER(Vector68) { OSAL_IRQ_EPILOGUE();
}
-#endif /* NRF51_GPT_USE_TIMER2 */
+#endif /* NRF5_GPT_USE_TIMER2 */
/*===========================================================================*/
/* Driver exported functions. */
@@ -170,19 +173,19 @@ OSAL_IRQ_HANDLER(Vector68) { */
void gpt_lld_init(void) {
-#if NRF51_GPT_USE_TIMER0
+#if NRF5_GPT_USE_TIMER0
/* Driver initialization.*/
GPTD1.tim = NRF_TIMER0;
gptObjectInit(&GPTD1);
#endif
-#if NRF51_GPT_USE_TIMER1
+#if NRF5_GPT_USE_TIMER1
/* Driver initialization.*/
GPTD2.tim = NRF_TIMER1;
gptObjectInit(&GPTD2);
#endif
-#if NRF51_GPT_USE_TIMER2
+#if NRF5_GPT_USE_TIMER2
/* Driver initialization.*/
GPTD3.tim = NRF_TIMER2;
gptObjectInit(&GPTD3);
@@ -201,21 +204,21 @@ void gpt_lld_start(GPTDriver *gptp) { NRF_TIMER_Type *tim = gptp->tim;
if (gptp->state == GPT_STOP) {
- osalDbgAssert(gptp->cc_int < NRF51_TIMER_COMPARE_NUM,
+ osalDbgAssert(gptp->cc_int < NRF5_TIMER_COMPARE_NUM,
"invalid capture/compare index");
tim->INTENSET = TIMER_INTENSET_COMPARE0_Msk << gptp->cc_int;
-#if NRF51_GPT_USE_TIMER0
+#if NRF5_GPT_USE_TIMER0
if (&GPTD1 == gptp)
- nvicEnableVector(TIMER0_IRQn, NRF51_GPT_TIMER0_IRQ_PRIORITY);
+ nvicEnableVector(TIMER0_IRQn, NRF5_GPT_TIMER0_IRQ_PRIORITY);
#endif
-#if NRF51_GPT_USE_TIMER1
+#if NRF5_GPT_USE_TIMER1
if (&GPTD2 == gptp)
- nvicEnableVector(TIMER1_IRQn, NRF51_GPT_TIMER1_IRQ_PRIORITY);
+ nvicEnableVector(TIMER1_IRQn, NRF5_GPT_TIMER1_IRQ_PRIORITY);
#endif
-#if NRF51_GPT_USE_TIMER2
+#if NRF5_GPT_USE_TIMER2
if (&GPTD3 == gptp)
- nvicEnableVector(TIMER2_IRQn, NRF51_GPT_TIMER2_IRQ_PRIORITY);
+ nvicEnableVector(TIMER2_IRQn, NRF5_GPT_TIMER2_IRQ_PRIORITY);
#endif
}
@@ -235,7 +238,7 @@ void gpt_lld_start(GPTDriver *gptp) { tim->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
break;
-#if NRF51_GPT_USE_TIMER0
+#if NRF5_GPT_USE_TIMER0
case 24:
tim->BITMODE = TIMER_BITMODE_BITMODE_24Bit << TIMER_BITMODE_BITMODE_Pos;
break;
@@ -263,15 +266,15 @@ void gpt_lld_stop(GPTDriver *gptp) { if (gptp->state == GPT_READY) {
gptp->tim->TASKS_SHUTDOWN = 1;
-#if NRF51_GPT_USE_TIMER0
+#if NRF5_GPT_USE_TIMER0
if (&GPTD1 == gptp)
nvicDisableVector(TIMER0_IRQn);
#endif
-#if NRF51_GPT_USE_TIMER1
+#if NRF5_GPT_USE_TIMER1
if (&GPTD2 == gptp)
nvicDisableVector(TIMER1_IRQn);
#endif
-#if NRF51_GPT_USE_TIMER2
+#if NRF5_GPT_USE_TIMER2
if (&GPTD3 == gptp)
nvicDisableVector(TIMER2_IRQn);
#endif
diff --git a/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.h b/os/hal/ports/NRF5/LLD/hal_gpt_lld.h index 9b4cc9b..4173a3a 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.h +++ b/os/hal/ports/NRF5/LLD/hal_gpt_lld.h @@ -15,8 +15,8 @@ */
/**
- * @file NRF51x22/gpt_lld.h
- * @brief NRF51x22 GPT subsystem low level driver header.
+ * @file NRF5/LLD/gpt_lld.h
+ * @brief NRF5 GPT subsystem low level driver header.
*
* @addtogroup GPT
* @{
@@ -44,8 +44,8 @@ * @details If set to @p TRUE the support for GPTD1 is included.
* @note The default is @p TRUE.
*/
-#if !defined(NRF51_GPT_USE_TIMER0) || defined(__DOXYGEN__)
-#define NRF51_GPT_USE_TIMER0 FALSE
+#if !defined(NRF5_GPT_USE_TIMER0) || defined(__DOXYGEN__)
+#define NRF5_GPT_USE_TIMER0 FALSE
#endif
/**
@@ -53,8 +53,8 @@ * @details If set to @p TRUE the support for GPTD2 is included.
* @note The default is @p TRUE.
*/
-#if !defined(NRF51_GPT_USE_TIMER1) || defined(__DOXYGEN__)
-#define NRF51_GPT_USE_TIMER1 FALSE
+#if !defined(NRF5_GPT_USE_TIMER1) || defined(__DOXYGEN__)
+#define NRF5_GPT_USE_TIMER1 FALSE
#endif
/**
@@ -62,29 +62,29 @@ * @details If set to @p TRUE the support for GPTD3 is included.
* @note The default is @p TRUE.
*/
-#if !defined(NRF51_GPT_USE_TIMER2) || defined(__DOXYGEN__)
-#define NRF51_GPT_USE_TIMER2 FALSE
+#if !defined(NRF5_GPT_USE_TIMER2) || defined(__DOXYGEN__)
+#define NRF5_GPT_USE_TIMER2 FALSE
#endif
/**
* @brief GPTD1 interrupt priority level setting.
*/
-#if !defined(NRF51_GPT_TIMER0_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_GPT_TIMER0_IRQ_PRIORITY 3
+#if !defined(NRF5_GPT_TIMER0_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_GPT_TIMER0_IRQ_PRIORITY 3
#endif
/**
* @brief GPTD2 interrupt priority level setting.
*/
-#if !defined(NRF51_GPT_TIMER1_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_GPT_TIMER1_IRQ_PRIORITY 3
+#if !defined(NRF5_GPT_TIMER1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_GPT_TIMER1_IRQ_PRIORITY 3
#endif
/**
* @brief GPTD3 interrupt priority level setting.
*/
-#if !defined(NRF51_GPT_TIMER2_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_GPT_TIMER2_IRQ_PRIORITY 3
+#if !defined(NRF5_GPT_TIMER2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_GPT_TIMER2_IRQ_PRIORITY 3
#endif
/** @} */
@@ -92,23 +92,23 @@ /* Derived constants and error checks. */
/*===========================================================================*/
-#if !NRF51_GPT_USE_TIMER0 && !NRF51_GPT_USE_TIMER1 && \
- !NRF51_GPT_USE_TIMER2
+#if !NRF5_GPT_USE_TIMER0 && !NRF5_GPT_USE_TIMER1 && \
+ !NRF5_GPT_USE_TIMER2
#error "GPT driver activated but no TIMER peripheral assigned"
#endif
-#if NRF51_GPT_USE_TIMER0 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_GPT_TIMER0_IRQ_PRIORITY)
+#if NRF5_GPT_USE_TIMER0 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_GPT_TIMER0_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to TIMER0"
#endif
-#if NRF51_GPT_USE_TIMER1 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_GPT_TIMER1_IRQ_PRIORITY)
+#if NRF5_GPT_USE_TIMER1 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_GPT_TIMER1_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to TIMER1"
#endif
-#if NRF51_GPT_USE_TIMER2 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_GPT_TIMER2_IRQ_PRIORITY)
+#if NRF5_GPT_USE_TIMER2 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_GPT_TIMER2_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to TIMER2"
#endif
@@ -120,16 +120,16 @@ * @brief GPT frequency type.
*/
typedef enum {
- NRF51_GPT_FREQ_31250HZ = 31250,
- NRF51_GPT_FREQ_62500HZ = 62500,
- NRF51_GPT_FREQ_125KHZ = 125000,
- NRF51_GPT_FREQ_250KHZ = 250000,
- NRF51_GPT_FREQ_500KHZ = 500000,
- NRF51_GPT_FREQ_1MHZ = 1000000,
- NRF51_GPT_FREQ_2MHZ = 2000000,
- NRF51_GPT_FREQ_4MHZ = 4000000,
- NRF51_GPT_FREQ_8MHZ = 8000000,
- NRF51_GPT_FREQ_16MHZ = 16000000,
+ NRF5_GPT_FREQ_31250HZ = 31250,
+ NRF5_GPT_FREQ_62500HZ = 62500,
+ NRF5_GPT_FREQ_125KHZ = 125000,
+ NRF5_GPT_FREQ_250KHZ = 250000,
+ NRF5_GPT_FREQ_500KHZ = 500000,
+ NRF5_GPT_FREQ_1MHZ = 1000000,
+ NRF5_GPT_FREQ_2MHZ = 2000000,
+ NRF5_GPT_FREQ_4MHZ = 4000000,
+ NRF5_GPT_FREQ_8MHZ = 8000000,
+ NRF5_GPT_FREQ_16MHZ = 16000000,
} gptfreq_t;
/**
@@ -231,15 +231,15 @@ struct GPTDriver { /* External declarations. */
/*===========================================================================*/
-#if NRF51_GPT_USE_TIMER0 && !defined(__DOXYGEN__)
+#if NRF5_GPT_USE_TIMER0 && !defined(__DOXYGEN__)
extern GPTDriver GPTD1;
#endif
-#if NRF51_GPT_USE_TIMER1 && !defined(__DOXYGEN__)
+#if NRF5_GPT_USE_TIMER1 && !defined(__DOXYGEN__)
extern GPTDriver GPTD2;
#endif
-#if NRF51_GPT_USE_TIMER2 && !defined(__DOXYGEN__)
+#if NRF5_GPT_USE_TIMER2 && !defined(__DOXYGEN__)
extern GPTDriver GPTD3;
#endif
diff --git a/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c b/os/hal/ports/NRF5/LLD/hal_i2c_lld.c index 611a004..fefca0c 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c +++ b/os/hal/ports/NRF5/LLD/hal_i2c_lld.c @@ -15,8 +15,8 @@ */
/**
- * @file NRF51822/i2c_lld.c
- * @brief NRF51822 I2C subsystem low level driver source.
+ * @file NRF5/LLD/hal_i2c_lld.c
+ * @brief NRF5 I2C subsystem low level driver source.
*
* @addtogroup I2C
* @{
@@ -24,7 +24,7 @@ #include "osal.h"
#include "hal.h"
-#include "nrf51_delay.h"
+#include "nrf_delay.h"
#if HAL_USE_I2C || defined(__DOXYGEN__)
@@ -33,10 +33,10 @@ /*===========================================================================*/
/* These macros are needed to see if the slave is stuck and we as master send dummy clock cycles to end its wait */
-#define I2C_HIGH(p) do { NRF_GPIO->OUTSET = (1UL << (p)); } while(0) /*!< Pulls I2C line high */
-#define I2C_LOW(p) do { NRF_GPIO->OUTCLR = (1UL << (p)); } while(0) /*!< Pulls I2C line low */
-#define I2C_INPUT(p) do { NRF_GPIO->DIRCLR = (1UL << (p)); } while(0) /*!< Configures I2C pin as input */
-#define I2C_OUTPUT(p) do { NRF_GPIO->DIRSET = (1UL << (p)); } while(0) /*!< Configures I2C pin as output */
+#define I2C_HIGH(p) do { IOPORT1->OUTSET = (1UL << (p)); } while(0) /*!< Pulls I2C line high */
+#define I2C_LOW(p) do { IOPORT1->OUTCLR = (1UL << (p)); } while(0) /*!< Pulls I2C line low */
+#define I2C_INPUT(p) do { IOPORT1->DIRCLR = (1UL << (p)); } while(0) /*!< Configures I2C pin as input */
+#define I2C_OUTPUT(p) do { IOPORT1->DIRSET = (1UL << (p)); } while(0) /*!< Configures I2C pin as output */
#define I2C_PIN_CNF \
((GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) \
@@ -52,12 +52,12 @@ | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) \
| (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos))
-#if NRF51_I2C_USE_I2C0
+#if NRF5_I2C_USE_I2C0
#define I2C_IRQ_NUM SPI0_TWI0_IRQn
-#define I2C_IRQ_PRI NRF51_I2C_I2C0_IRQ_PRIORITY
-#elif NRF51_I2C_USE_I2C1
+#define I2C_IRQ_PRI NRF5_I2C_I2C0_IRQ_PRIORITY
+#elif NRF5_I2C_USE_I2C1
#define I2C_IRQ_NUM SPI1_TWI1_IRQn
-#define I2C_IRQ_PRI NRF51_I2C_I2C1_IRQ_PRIORITY
+#define I2C_IRQ_PRI NRF5_I2C_I2C1_IRQ_PRIORITY
#endif
/*===========================================================================*/
@@ -67,14 +67,14 @@ /**
* @brief I2C0 driver identifier.
*/
-#if NRF51_I2C_USE_I2C0 || defined(__DOXYGEN__)
+#if NRF5_I2C_USE_I2C0 || defined(__DOXYGEN__)
I2CDriver I2CD1;
#endif
/**
* @brief I2C1 driver identifier.
*/
-#if NRF51_I2C_USE_I2C1 || defined(__DOXYGEN__)
+#if NRF5_I2C_USE_I2C1 || defined(__DOXYGEN__)
I2CDriver I2CD2;
#endif
@@ -102,14 +102,14 @@ static void i2c_clear_bus(I2CDriver *i2cp) const I2CConfig *cfg = i2cp->config;
int i;
- NRF_GPIO->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF;
- NRF_GPIO->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF;
+ IOPORT1->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF;
+ IOPORT1->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF;
I2C_HIGH(cfg->sda_pad);
I2C_HIGH(cfg->scl_pad);
- NRF_GPIO->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF_CLR;
- NRF_GPIO->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF_CLR;
+ IOPORT1->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF_CLR;
+ IOPORT1->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF_CLR;
nrf_delay_us(4);
@@ -165,7 +165,10 @@ static void serve_interrupt(I2CDriver *i2cp) { if(i2c->EVENTS_TXDSENT) {
i2c->EVENTS_TXDSENT = 0;
-
+#if CORTEX_MODEL >= 4
+ (void)i2c->EVENTS_TXDSENT;
+#endif
+
if(--i2cp->txbytes) {
i2c->TXD = *i2cp->txptr++;
@@ -182,6 +185,10 @@ static void serve_interrupt(I2CDriver *i2cp) { if(i2c->EVENTS_RXDREADY) {
i2c->EVENTS_RXDREADY = 0;
+#if CORTEX_MODEL >= 4
+ (void)i2c->EVENTS_RXDREADY;
+#endif
+
*i2cp->rxptr++ = i2c->RXD;
if(--i2cp->rxbytes) {
@@ -194,7 +201,9 @@ static void serve_interrupt(I2CDriver *i2cp) { uint32_t err = i2c->ERRORSRC;
i2c->EVENTS_ERROR = 0;
-
+#if CORTEX_MODEL >= 4
+ (void)i2c->EVENTS_ERROR;
+#endif
if (err & TWI_ERRORSRC_OVERRUN_Msk)
i2cp->errors |= I2C_OVERRUN;
if (err & (TWI_ERRORSRC_ANACK_Msk | TWI_ERRORSRC_DNACK_Msk))
@@ -206,6 +215,9 @@ static void serve_interrupt(I2CDriver *i2cp) { stop_count++;
i2c->EVENTS_STOPPED = 0;
+#if CORTEX_MODEL >= 4
+ (void)i2c->EVENTS_STOPPED;
+#endif
_i2c_wakeup_isr(i2cp);
}
}
@@ -214,7 +226,7 @@ static void serve_interrupt(I2CDriver *i2cp) { /* Driver interrupt handlers. */
/*===========================================================================*/
-#if NRF51_I2C_USE_I2C0 || defined(__DOXYGEN__)
+#if NRF5_I2C_USE_I2C0 || defined(__DOXYGEN__)
OSAL_IRQ_HANDLER(Vector4C) {
@@ -225,7 +237,7 @@ OSAL_IRQ_HANDLER(Vector4C) { #endif
-#if NRF51_I2C_USE_I2C1 || defined(__DOXYGEN__)
+#if NRF5_I2C_USE_I2C1 || defined(__DOXYGEN__)
OSAL_IRQ_HANDLER(Vector50) {
@@ -247,13 +259,13 @@ OSAL_IRQ_HANDLER(Vector50) { */
void i2c_lld_init(void) {
-#if NRF51_I2C_USE_I2C0
+#if NRF5_I2C_USE_I2C0
i2cObjectInit(&I2CD1);
I2CD1.thread = NULL;
I2CD1.i2c = NRF_TWI0;
#endif
-#if NRF51_I2C_USE_I2C1
+#if NRF5_I2C_USE_I2C1
i2cObjectInit(&I2CD2);
I2CD2.thread = NULL;
I2CD2.i2c = NRF_TWI1;
@@ -278,14 +290,23 @@ void i2c_lld_start(I2CDriver *i2cp) { i2c_clear_bus(i2cp);
- NRF_GPIO->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF;
- NRF_GPIO->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF;
+ IOPORT1->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF;
+ IOPORT1->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF;
i2c->EVENTS_RXDREADY = 0;
i2c->EVENTS_TXDSENT = 0;
+#if CORTEX_MODEL >= 4
+ (void)i2c->EVENTS_RXDREADY;
+ (void)i2c->EVENTS_TXDSENT;
+#endif
+#if NRF_SERIES == 51
i2c->PSELSCL = cfg->scl_pad;
i2c->PSELSDA = cfg->sda_pad;
-
+#else
+ i2c->PSEL.SCL = cfg->scl_pad;
+ i2c->PSEL.SDA = cfg->sda_pad;
+#endif
+
switch (cfg->clock) {
case 100000:
i2c->FREQUENCY = TWI_FREQUENCY_FREQUENCY_K100 << TWI_FREQUENCY_FREQUENCY_Pos;
@@ -330,8 +351,8 @@ void i2c_lld_stop(I2CDriver *i2cp) { nvicDisableVector(I2C_IRQ_NUM);
- NRF_GPIO->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF_CLR;
- NRF_GPIO->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF_CLR;
+ IOPORT1->PIN_CNF[cfg->scl_pad] = I2C_PIN_CNF_CLR;
+ IOPORT1->PIN_CNF[cfg->sda_pad] = I2C_PIN_CNF_CLR;
}
}
diff --git a/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.h b/os/hal/ports/NRF5/LLD/hal_i2c_lld.h index e2c3d07..578d69b 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.h +++ b/os/hal/ports/NRF5/LLD/hal_i2c_lld.h @@ -15,8 +15,8 @@ */
/**
- * @file NRF51822/i2c_lld.h
- * @brief NRF51822 I2C subsystem low level driver header.
+ * @file NRF5/LLD/hal_i2c_lld.h
+ * @brief NRF5 I2C subsystem low level driver header.
*
* @addtogroup I2C
* @{
@@ -49,8 +49,8 @@ * @details If set to @p TRUE the support for I2C0 is included.
* @note The default is @p FALSE.
*/
-#if !defined(NRF51_I2C_USE_I2C0) || defined(__DOXYGEN__)
-#define NRF51_I2C_USE_I2C0 FALSE
+#if !defined(NRF5_I2C_USE_I2C0) || defined(__DOXYGEN__)
+#define NRF5_I2C_USE_I2C0 FALSE
#endif
/**
@@ -58,22 +58,22 @@ * @details If set to @p TRUE the support for I2C1 is included.
* @note The default is @p FALSE.
*/
-#if !defined(NRF51_I2C_USE_I2C1) || defined(__DOXYGEN__)
-#define NRF51_I2C_USE_I2C1 FALSE
+#if !defined(NRF5_I2C_USE_I2C1) || defined(__DOXYGEN__)
+#define NRF5_I2C_USE_I2C1 FALSE
#endif
/**
* @brief I2C0 interrupt priority level setting.
*/
-#if !defined(NRF51_I2C_I2C0_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_I2C_I2C0_IRQ_PRIORITY 3
+#if !defined(NRF5_I2C_I2C0_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_I2C_I2C0_IRQ_PRIORITY 3
#endif
/**
* @brief I2C1 interrupt priority level setting.
*/
-#if !defined(NRF51_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_I2C_I2C1_IRQ_PRIORITY 3
+#if !defined(NRF5_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_I2C_I2C1_IRQ_PRIORITY 3
#endif
/** @} */
@@ -81,13 +81,13 @@ /* Derived constants and error checks. */
/*===========================================================================*/
-#if NRF51_I2C_USE_I2C0 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_I2C_I2C0_IRQ_PRIORITY)
+#if NRF5_I2C_USE_I2C0 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_I2C_I2C0_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to I2C0"
#endif
-#if NRF51_I2C_USE_I2C1 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_I2C_I2C1_IRQ_PRIORITY)
+#if NRF5_I2C_USE_I2C1 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_I2C_I2C1_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to I2C1"
#endif
@@ -198,11 +198,11 @@ struct I2CDriver { #if !defined(__DOXYGEN__)
-#if NRF51_I2C_USE_I2C0
+#if NRF5_I2C_USE_I2C0
extern I2CDriver I2CD1;
#endif
-#if NRF51_I2C_USE_I2C1
+#if NRF5_I2C_USE_I2C1
extern I2CDriver I2CD2;
#endif
diff --git a/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c b/os/hal/ports/NRF5/LLD/hal_pal_lld.c index 69fc9fe..21e4b0b 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c +++ b/os/hal/ports/NRF5/LLD/hal_pal_lld.c @@ -15,8 +15,8 @@ */
/**
- * @file pal_lld.c
- * @brief NRF51822 PAL subsystem low level driver source.
+ * @file NRF5/LLD/hal_pal_lld.c
+ * @brief NRF5 PAL subsystem low level driver source.
*
* @addtogroup PAL
* @{
@@ -46,12 +46,12 @@ void _pal_lld_setpadmode(ioportid_t port, uint8_t pad, iomode_t mode)
{
(void)port;
- osalDbgAssert(pad <= 31, "pal_lld_setpadmode() - invalid pad");
+ osalDbgAssert(pad < PAL_IOPORTS_WIDTH, "pal_lld_setpadmode() - invalid pad");
switch (mode) {
case PAL_MODE_RESET:
case PAL_MODE_UNCONNECTED:
- NRF_GPIO->PIN_CNF[pad] =
+ IOPORT1->PIN_CNF[pad] =
(GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) |
(GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) |
(GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) |
@@ -60,7 +60,7 @@ void _pal_lld_setpadmode(ioportid_t port, uint8_t pad, iomode_t mode) break;
case PAL_MODE_INPUT:
case PAL_MODE_INPUT_ANALOG:
- NRF_GPIO->PIN_CNF[pad] =
+ IOPORT1->PIN_CNF[pad] =
(GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) |
(GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) |
(GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) |
@@ -68,7 +68,7 @@ void _pal_lld_setpadmode(ioportid_t port, uint8_t pad, iomode_t mode) (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
break;
case PAL_MODE_INPUT_PULLUP:
- NRF_GPIO->PIN_CNF[pad] =
+ IOPORT1->PIN_CNF[pad] =
(GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) |
(GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) |
(GPIO_PIN_CNF_PULL_Pullup << GPIO_PIN_CNF_PULL_Pos) |
@@ -76,7 +76,7 @@ void _pal_lld_setpadmode(ioportid_t port, uint8_t pad, iomode_t mode) (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
break;
case PAL_MODE_INPUT_PULLDOWN:
- NRF_GPIO->PIN_CNF[pad] =
+ IOPORT1->PIN_CNF[pad] =
(GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) |
(GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) |
(GPIO_PIN_CNF_PULL_Pulldown << GPIO_PIN_CNF_PULL_Pos) |
@@ -84,7 +84,7 @@ void _pal_lld_setpadmode(ioportid_t port, uint8_t pad, iomode_t mode) (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
break;
case PAL_MODE_OUTPUT_PUSHPULL:
- NRF_GPIO->PIN_CNF[pad] =
+ IOPORT1->PIN_CNF[pad] =
(GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) |
(GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) |
(GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) |
@@ -92,7 +92,7 @@ void _pal_lld_setpadmode(ioportid_t port, uint8_t pad, iomode_t mode) (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
break;
case PAL_MODE_OUTPUT_OPENDRAIN:
- NRF_GPIO->PIN_CNF[pad] =
+ IOPORT1->PIN_CNF[pad] =
(GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) |
(GPIO_PIN_CNF_DRIVE_S0D1 << GPIO_PIN_CNF_DRIVE_Pos) |
(GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) |
@@ -114,9 +114,9 @@ void _pal_lld_setpadmode(ioportid_t port, uint8_t pad, iomode_t mode) /*===========================================================================*/
/**
- * @brief NRF51 I/O ports configuration.
+ * @brief NRF5 I/O ports configuration.
*
- * @param[in] config the NRF51 ports configuration
+ * @param[in] config the NRF5 ports configuration
*
* @notapi
*/
diff --git a/os/hal/ports/NRF51/NRF51822/hal_pal_lld.h b/os/hal/ports/NRF5/LLD/hal_pal_lld.h index 5032916..745afd3 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_pal_lld.h +++ b/os/hal/ports/NRF5/LLD/hal_pal_lld.h @@ -15,8 +15,8 @@ */
/**
- * @file pal_lld.h
- * @brief NRF51822 PAL subsystem low level driver header.
+ * @file NRF5/LLD/hal_pal_lld.h
+ * @brief NRF5 PAL subsystem low level driver header.
*
* @addtogroup PAL
* @{
@@ -128,7 +128,11 @@ typedef NRF_GPIO_Type *ioportid_t; * @details Low level drivers can define multiple ports, it is suggested to
* use this naming convention.
*/
+#if NRF_SERIES == 51
#define IOPORT1 NRF_GPIO
+#else
+#define IOPORT1 NRF_P0
+#endif
/*===========================================================================*/
/* Implementation, some of the following macros could be implemented as */
@@ -152,7 +156,7 @@ typedef NRF_GPIO_Type *ioportid_t; *
* @notapi
*/
-#define pal_lld_readport(port) (NRF_GPIO->IN)
+#define pal_lld_readport(port) (IOPORT1->IN)
/**
* @brief Reads the output latch.
@@ -164,7 +168,7 @@ typedef NRF_GPIO_Type *ioportid_t; *
* @notapi
*/
-#define pal_lld_readlatch(port) (NRF_GPIO->OUT)
+#define pal_lld_readlatch(port) (IOPORT1->OUT)
/**
* @brief Writes a bits mask on a I/O port.
@@ -174,7 +178,7 @@ typedef NRF_GPIO_Type *ioportid_t; *
* @notapi
*/
-#define pal_lld_writeport(port, bits) (NRF_GPIO->OUT = (bits))
+#define pal_lld_writeport(port, bits) (IOPORT1->OUT = (bits))
/**
* @brief Sets a bits mask on a I/O port.
@@ -187,7 +191,7 @@ typedef NRF_GPIO_Type *ioportid_t; *
* @notapi
*/
-#define pal_lld_setport(port, bits) (NRF_GPIO->OUTSET = (bits))
+#define pal_lld_setport(port, bits) (IOPORT1->OUTSET = (bits))
/**
@@ -201,7 +205,7 @@ typedef NRF_GPIO_Type *ioportid_t; *
* @notapi
*/
-#define pal_lld_clearport(port, bits) (NRF_GPIO->OUTCLR = (bits))
+#define pal_lld_clearport(port, bits) (IOPORT1->OUTCLR = (bits))
/**
* @brief Pads group mode setup.
@@ -234,7 +238,7 @@ typedef NRF_GPIO_Type *ioportid_t; * @notapi
*/
#define pal_lld_readpad(port, pad) \
- ((NRF_GPIO->IN & ((uint32_t) 1 << pad)) ? PAL_HIGH : PAL_LOW)
+ ((IOPORT1->IN & ((uint32_t) 1 << pad)) ? PAL_HIGH : PAL_LOW)
/**
* @brief Writes a logical state on an output pad.
@@ -255,9 +259,9 @@ typedef NRF_GPIO_Type *ioportid_t; do { \
(void)port; \
if (bit == PAL_HIGH) \
- NRF_GPIO->OUTSET = ((uint32_t) 1 << pad); \
+ IOPORT1->OUTSET = ((uint32_t) 1 << pad); \
else \
- NRF_GPIO->OUTCLR = ((uint32_t) 1 << pad); \
+ IOPORT1->OUTCLR = ((uint32_t) 1 << pad); \
} while (false)
/**
@@ -271,7 +275,7 @@ typedef NRF_GPIO_Type *ioportid_t; *
* @notapi
*/
-#define pal_lld_setpad(port, pad) (NRF_GPIO->OUTSET = (uint32_t) 1 << (pad))
+#define pal_lld_setpad(port, pad) (IOPORT1->OUTSET = (uint32_t) 1 << (pad))
/**
* @brief Clears a pad logical state to @p PAL_LOW.
@@ -284,7 +288,7 @@ typedef NRF_GPIO_Type *ioportid_t; *
* @notapi
*/
-#define pal_lld_clearpad(port, pad) (NRF_GPIO->OUTCLR = (uint32_t) 1 << (pad))
+#define pal_lld_clearpad(port, pad) (IOPORT1->OUTCLR = (uint32_t) 1 << (pad))
/**
* @brief Toggles a pad logical state.
@@ -299,11 +303,11 @@ typedef NRF_GPIO_Type *ioportid_t; */
#define pal_lld_togglepad(port, pad) \
do { \
- uint8_t bit = (NRF_GPIO->IN >> (pad)) & 1; \
+ uint8_t bit = (IOPORT1->OUT >> (pad)) & 1; \
if (bit) \
- NRF_GPIO->OUTCLR = 1 << (pad); \
+ IOPORT1->OUTCLR = 1 << (pad); \
else \
- NRF_GPIO->OUTSET = 1 << (pad); \
+ IOPORT1->OUTSET = 1 << (pad); \
} while (0)
/**
diff --git a/os/hal/ports/NRF5/LLD/hal_qei_lld.c b/os/hal/ports/NRF5/LLD/hal_qei_lld.c new file mode 100644 index 0000000..d3b99cd --- /dev/null +++ b/os/hal/ports/NRF5/LLD/hal_qei_lld.c @@ -0,0 +1,300 @@ +/*
+ ChibiOS - Copyright (C) 2016..2016 Stéphane D'Alu
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file NRF51/hal_qei_lld.c
+ * @brief NRF51 QEI subsystem low level driver.
+ *
+ * @addtogroup QEI
+ * @{
+ */
+
+#include "hal.h"
+
+#if (HAL_USE_QEI == TRUE) || defined(__DOXYGEN__)
+
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief QEID1 driver identifier.
+ */
+#if NRF5_QEI_USE_QDEC0 || defined(__DOXYGEN__)
+QEIDriver QEID1;
+#endif
+
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Common IRQ handler.
+ *
+ * @param[in] qeip pointer to an QEIDriver
+ */
+static void serve_interrupt(QEIDriver *qeip) {
+ NRF_QDEC_Type *qdec = qeip->qdec;
+
+#if NRF5_QEI_USE_ACC_OVERFLOWED_CB == TRUE
+ /* Accumulator overflowed
+ */
+ if (qdec->EVENTS_ACCOF) {
+ qdec->EVENTS_ACCOF = 0;
+#if CORTEX_MODEL >= 4
+ (void)qdec->EVENTS_ACCOF;
+#endif
+
+ qeip->overflowed++;
+ if (qeip->config->overflowed_cb)
+ qeip->config->overflowed_cb(qeip);
+ }
+#endif
+
+ /* Report ready
+ */
+ if (qdec->EVENTS_REPORTRDY) {
+ qdec->EVENTS_REPORTRDY = 0;
+#if CORTEX_MODEL >= 4
+ (void)qdec->EVENTS_REPORTRDY;
+#endif
+
+ /* Read (and clear counters due to shortcut) */
+ int16_t acc = ( int16_t)qdec->ACCREAD;
+ uint16_t accdbl = (uint16_t)qdec->ACCDBLREAD;
+
+ /* Inverse direction if requested */
+ if (qeip->config->dirinv)
+ acc = -acc; // acc is [-1024..+1023], its okay on int16_t
+
+ /* Adjust counter */
+ qeiAdjustI(qeip, acc);
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if NRF5_QEI_USE_QDEC0 == TRUE
+/**
+ * @brief Quadrature decoder vector (QDEC)
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector88) {
+
+ OSAL_IRQ_PROLOGUE();
+ serve_interrupt(&QEID1);
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level QEI driver initialization.
+ *
+ * @notapi
+ */
+void qei_lld_init(void) {
+
+#if NRF5_QEI_USE_QDEC0 == TRUE
+ /* Driver initialization.*/
+ qeiObjectInit(&QEID1);
+ QEID1.qdec = NRF_QDEC;
+#endif
+}
+
+/**
+ * @brief Configures and activates the QEI peripheral.
+ *
+ * @param[in] qeip pointer to the @p QEIDriver object
+ *
+ * @notapi
+ */
+void qei_lld_start(QEIDriver *qeip) {
+ NRF_QDEC_Type *qdec = qeip->qdec;
+ const QEIConfig *cfg = qeip->config;
+
+ if (qeip->state == QEI_STOP) {
+ /* Set Pins */
+ palSetLineMode(cfg->phase_a, PAL_MODE_INPUT);
+ palSetLineMode(cfg->phase_b, PAL_MODE_INPUT);
+#if NRF5_QEI_USE_LED == TRUE
+ if (cfg->led != PAL_NOLINE) {
+ palSetLineMode(cfg->led, PAL_MODE_INPUT);
+ }
+#endif
+
+ /* Set interrupt masks and enable interrupt */
+#if NRF5_QEI_USE_ACC_OVERFLOWED_CB == TRUE
+ qdec->INTENSET = QDEC_INTENSET_REPORTRDY_Msk |
+ QDEC_INTENSET_ACCOF_Msk;
+#else
+ qdec->INTENSET = QDEC_INTENSET_REPORTRDY_Msk;
+#endif
+#if NRF5_QEI_USE_QDEC0 == TRUE
+ if (&QEID1 == qeip) {
+ nvicEnableVector(QDEC_IRQn, NRF5_QEI_QDEC0_IRQ_PRIORITY);
+ }
+#endif
+
+ /* Select pin for Phase A and Phase B */
+#if NRF_SERIES == 51
+ qdec->PSELA = PAL_PAD(cfg->phase_a);
+ qdec->PSELB = PAL_PAD(cfg->phase_b);
+#else
+ qdec->PSEL.A = PAL_PAD(cfg->phase_a);
+ qdec->PSEL.B = PAL_PAD(cfg->phase_b);
+#endif
+ /* Select (optional) pin for LED, and configure it */
+#if NRF5_QEI_USE_LED == TRUE
+#if NRF_SERIES == 51
+ qdec->PSELLED = PAL_PAD(cfg->led);
+#else
+ qdec->PSEL.LED = PAL_PAD(cfg->led);
+#endif
+ qdec->LEDPOL = ((cfg->led_polarity == QEI_LED_POLARITY_LOW)
+ ? QDEC_LEDPOL_LEDPOL_ActiveLow
+ : QDEC_LEDPOL_LEDPOL_ActiveHigh)
+ << QDEC_LEDPOL_LEDPOL_Pos;
+ qdec->LEDPRE = cfg->led_warming;
+#else
+#if NRF_SERIES == 51
+ qdec->PSELLED = (uint32_t)-1;
+#else
+ qdec->PSEL.LED = (uint32_t)-1;
+#endif
+#endif
+
+ /* Set sampling resolution and debouncing */
+ qdec->SAMPLEPER = cfg->resolution;
+ qdec->DBFEN = (cfg->debouncing ? QDEC_DBFEN_DBFEN_Enabled
+ : QDEC_DBFEN_DBFEN_Disabled)
+ << QDEC_DBFEN_DBFEN_Pos;
+
+ /* Define minimum sampling before reporting
+ and create shortcut to clear accumulation */
+ qdec->REPORTPER = cfg->report;
+ qdec->SHORTS = QDEC_SHORTS_REPORTRDY_READCLRACC_Msk;
+
+ /* Enable peripheric */
+ qdec->ENABLE = 1;
+ }
+
+ /* Initially state is stopped, events cleared */
+ qdec->TASKS_STOP = 1;
+ qdec->EVENTS_SAMPLERDY = 0;
+ qdec->EVENTS_REPORTRDY = 0;
+ qdec->EVENTS_ACCOF = 0;
+#if CORTEX_MODEL >= 4
+ (void)qdec->EVENTS_SAMPLERDY;
+ (void)qdec->EVENTS_REPORTRDY;
+ (void)qdec->EVENTS_ACCOF;
+#endif
+}
+
+/**
+ * @brief Deactivates the QEI peripheral.
+ *
+ * @param[in] qeip pointer to the @p QEIDriver object
+ *
+ * @notapi
+ */
+void qei_lld_stop(QEIDriver *qeip) {
+
+ NRF_QDEC_Type *qdec = qeip->qdec;
+ const QEIConfig *cfg = qeip->config;
+
+ if (qeip->state == QEI_READY) {
+ qdec->TASKS_STOP = 1;
+ qdec->ENABLE = 0;
+
+ /* Unset interrupt masks and disable interrupt */
+#if NRF5_QEI_USE_QDEC0 == TRUE
+ if (&QEID1 == qeip) {
+ nvicDisableVector(QDEC_IRQn);
+ }
+#endif
+#if NRF5_QEI_USE_ACC_OVERFLOWED_CB == TRUE
+ qdec->INTENCLR = QDEC_INTENCLR_REPORTRDY_Msk |
+ QDEC_INTENCLR_ACCOF_Msk;
+#else
+ qdec->INTENCLR = QDEC_INTENCLR_REPORTRDY_Msk;
+#endif
+
+ /* Return pins to reset state */
+ palSetLineMode(cfg->phase_a, PAL_MODE_RESET);
+ palSetLineMode(cfg->phase_b, PAL_MODE_RESET);
+#if NRF5_QEI_USE_LED == TRUE
+ if (cfg->led != PAL_NOLINE) {
+ palSetLineMode(cfg->led, PAL_MODE_RESET);
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Enables the input capture.
+ *
+ * @param[in] qeip pointer to the @p QEIDriver object
+ *
+ * @notapi
+ */
+void qei_lld_enable(QEIDriver *qeip) {
+#if NRF5_QEI_USE_ACC_OVERFLOWED_CB == TRUE
+ qeip->overflowed = 0;
+#endif
+
+ qeip->qdec->EVENTS_SAMPLERDY = 0;
+ qeip->qdec->EVENTS_REPORTRDY = 0;
+ qeip->qdec->EVENTS_ACCOF = 0;
+#if CORTEX_MODEL >= 4
+ (void)qeip->qdec->EVENTS_SAMPLERDY;
+ (void)qeip->qdec->EVENTS_REPORTRDY;
+ (void)qeip->qdec->EVENTS_ACCOF;
+#endif
+ qeip->qdec->TASKS_START = 1;
+}
+
+/**
+ * @brief Disables the input capture.
+ *
+ * @param[in] qeip pointer to the @p QEIDriver object
+ *
+ * @notapi
+ */
+void qei_lld_disable(QEIDriver *qeip) {
+ qeip->qdec->TASKS_STOP = 1;
+}
+
+
+#endif /* HAL_USE_QEI */
+
+/** @} */
diff --git a/os/hal/ports/NRF5/LLD/hal_qei_lld.h b/os/hal/ports/NRF5/LLD/hal_qei_lld.h new file mode 100644 index 0000000..85c96a5 --- /dev/null +++ b/os/hal/ports/NRF5/LLD/hal_qei_lld.h @@ -0,0 +1,390 @@ +/*
+ ChibiOS - Copyright (C) 2016..2016 Stéphane D'Alu
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file NRF51/hal_qei_lld.h
+ * @brief NRF51 QEI subsystem low level driver header.
+ *
+ * @note Not tested with LED pin
+ *
+ * @note Pins are configured as input with no pull.
+ *
+ * @addtogroup QEI
+ * @{
+ */
+
+#ifndef HAL_QEI_LLD_H
+#define HAL_QEI_LLD_H
+
+#if (HAL_USE_QEI == TRUE) || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief For LED active on LOW
+ */
+#define QEI_LED_POLARITY_LOW 0
+
+/**
+ * @brief For LED active on HIGH
+ */
+#define QEI_LED_POLARITY_HIGH 1
+
+/**
+ * @brief Mininum usable value for defining counter underflow
+ */
+#define QEI_COUNT_MIN (-2147483648)
+
+/**
+ * @brief Maximum usable value for defining counter overflow
+ */
+#define QEI_COUNT_MAX ( 2147483647)
+
+
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief LED control enable switch.
+ * @details If set to @p TRUE the support for LED control
+ * is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(NRF5_QEI_USE_LED) || defined(__DOXYGEN__)
+#define NRF5_QEI_USE_LED FALSE
+#endif
+
+/**
+ * @brief Accumulator overflow notification enable switch.
+ * @details If set to @p TRUE the support for accumulator overflow
+ * is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(NRF5_QEI_USE_ACC_OVERFLOWED_CB) || defined(__DOXYGEN__)
+#define NRF5_QEI_USE_ACC_OVERFLOWED_CB FALSE
+#endif
+
+/**
+ * @brief QEID1 driver enable switch.
+ * @details If set to @p TRUE the support for QEID1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(NRF5_QEI_USE_QDEC0) || defined(__DOXYGEN__)
+#define NRF5_QEI_USE_QDEC0 FALSE
+#endif
+
+/**
+ * @brief QEID interrupt priority level setting for QDEC0.
+ */
+#if !defined(NRF5_QEI_QDEC0_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_QEI_QDEC0_IRQ_PRIORITY 2
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if NRF5_QEI_USE_QDEC0 == FALSE
+#error "Requesting QEI driver, but no QDEC peripheric attached"
+#endif
+
+#if NRF5_QEI_USE_QDEC0 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_QEI_QDEC0_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to QDEC0"
+#endif
+
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief QEI count mode.
+ */
+typedef enum {
+ QEI_MODE_QUADRATURE = 0, /**< Quadrature encoder mode. */
+} qeimode_t;
+
+/**
+ * @brief QEI resolution.
+ */
+typedef enum {
+ QEI_RESOLUTION_128us = 0x00UL, /**< 128us sample period. */
+ QEI_RESOLUTION_256us = 0x01UL, /**< 256us sample period. */
+ QEI_RESOLUTION_512us = 0x02UL, /**< 512us sample period. */
+ QEI_RESOLUTION_1024us = 0x03UL, /**< 1024us sample period. */
+ QEI_RESOLUTION_2048us = 0x04UL, /**< 2048us sample period. */
+ QEI_RESOLUTION_4096us = 0x05UL, /**< 4096us sample period. */
+ QEI_RESOLUTION_8192us = 0x06UL, /**< 8192us sample period. */
+ QEI_RESOLUTION_16384us = 0x07UL, /**< 16384us sample period. */
+} qeiresolution_t;
+
+/**
+ * @brief Clusters of samples.
+ */
+typedef enum {
+ QEI_REPORT_10 = 0x00UL, /**< 10 samples per report. */
+ QEI_REPORT_40 = 0x01UL, /**< 40 samples per report. */
+ QEI_REPORT_80 = 0x02UL, /**< 80 samples per report. */
+ QEI_REPORT_120 = 0x03UL, /**< 120 samples per report. */
+ QEI_REPORT_160 = 0x04UL, /**< 160 samples per report. */
+ QEI_REPORT_200 = 0x05UL, /**< 200 samples per report. */
+ QEI_REPORT_240 = 0x06UL, /**< 240 samples per report. */
+ QEI_REPORT_280 = 0x07UL, /**< 280 samples per report. */
+} qeireport_t;
+
+/**
+ * @brief QEI direction inversion.
+ */
+typedef enum {
+ QEI_DIRINV_FALSE = 0, /**< Do not invert counter direction. */
+ QEI_DIRINV_TRUE = 1, /**< Invert counter direction. */
+} qeidirinv_t;
+
+/**
+ * @brief QEI counter type.
+ */
+typedef int16_t qeicnt_t;
+
+/**
+ * @brief QEI delta type.
+ */
+typedef int16_t qeidelta_t;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief Count mode.
+ */
+ qeimode_t mode;
+ /**
+ * @brief Resolution.
+ */
+ qeiresolution_t resolution;
+ /**
+ * @brief Direction inversion.
+ */
+ qeidirinv_t dirinv;
+ /**
+ * @brief Handling of counter overflow/underflow
+ *
+ * @details When overflow occurs, the counter value is updated
+ * according to:
+ * - QEI_OVERFLOW_DISCARD:
+ * discard the update value, counter doesn't change
+ * - QEI_OVERFLOW_MINMAX
+ * counter will be updated to reach min or max
+ * - QEI_OVERFLOW_WRAP:
+ * counter value will wrap around
+ */
+ qeioverflow_t overflow;
+ /**
+ * @brief Min count value.
+ *
+ * @note If min == max, then QEI_COUNT_MIN is used.
+ */
+ qeicnt_t min;
+ /**
+ * @brief Max count value.
+ *
+ * @note If min == max, then QEI_COUNT_MAX is used.
+ */
+ qeicnt_t max;
+ /**
+ * @brief Notify of value change
+ *
+ * @note Called from ISR context.
+ */
+ qeicallback_t notify_cb;
+ /**
+ * @brief Notify of overflow
+ *
+ * @note Overflow notification is performed after
+ * value changed notification.
+ * @note Called from ISR context.
+ */
+ void (*overflow_cb)(QEIDriver *qeip, qeidelta_t delta);
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Line for reading Phase A
+ */
+ ioline_t phase_a;
+ /**
+ * @brief Line for reading Phase B
+ */
+ ioline_t phase_b;
+#if (NRF5_QEI_USE_LED == TRUE) || defined(__DOXYGEN__)
+ /**
+ * @brief Line used to control LED
+ *
+ * @note If LED is not controlled by MCU, you need to use the
+ * PAL_NOLINE value.
+ */
+ ioline_t led;
+ /**
+ * @brief Period in µs the LED is switched on prior to sampling.
+ *
+ * @details LED warming is expressed in micro-seconds and value
+ * is [0..511]
+ *
+ * @note 31µs is the recommanded default.
+ *
+ * @note If debouncing is activated, LED is always on for the
+ * whole sampling period (aka: resolution)
+ */
+ uint16_t led_warming;
+ /**
+ * @brief LED polarity to used (when LED is controlled by MCU)
+ */
+ uint8_t led_polarity;
+#endif
+ /**
+ * @brief Activate debouncing filter
+ *
+ * @note If LED is controlled by MCU, the led_warming is ignored and,
+ * LED is always on for the whole sampling period (aka: resolution)
+ */
+ bool debouncing;
+ /**
+ * @brief Number of samples per report
+ *
+ * @details Default to QEI_REPORT_10
+ */
+ qeireport_t report;
+#if NRF5_QEI_USE_ACC_OVERFLOWED_CB == TRUE
+ /**
+ * @brief Notify of internal accumulator overflowed
+ * (ie: MCU discarding samples)
+ *
+ * @note Called from ISR context.
+ */
+ qeicallback_t overflowed_cb;
+#endif
+} QEIConfig;
+
+/**
+ * @brief Structure representing an QEI driver.
+ */
+struct QEIDriver {
+ /**
+ * @brief Driver state.
+ */
+ qeistate_t state;
+ /**
+ * @brief Last count value.
+ */
+ qeicnt_t last;
+ /**
+ * @brief Current configuration data.
+ */
+ const QEIConfig *config;
+#if defined(QEI_DRIVER_EXT_FIELDS)
+ QEI_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Counter
+ */
+ qeicnt_t count;
+#if NRF5_QEI_USE_ACC_OVERFLOWED_CB == TRUE
+ /**
+ * @brief Number of time the MCU discarded updates due to
+ * accumulator overflow
+ */
+ uint32_t overflowed;
+#endif
+ /**
+ * @brief Pointer to the QDECx registers block.
+ */
+ NRF_QDEC_Type *qdec;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Returns the counter value.
+ *
+ * @param[in] qeip pointer to the @p QEIDriver object
+ * @return The current counter value.
+ *
+ * @notapi
+ */
+#define qei_lld_get_count(qeip) ((qeip)->count)
+
+
+/**
+ * @brief Set the counter value.
+ *
+ * @param[in] qeip pointer to the @p QEIDriver object
+ * @param[in] value counter value
+ *
+ * @notapi
+ */
+#define qei_lld_set_count(qeip, value) \
+ if ((qeip)->count != ((qeicnt_t)value)) { \
+ (qeip)->count = value; \
+ if ((qeip)->config->notify_cb) \
+ (qeip)->config->notify_cb(qeip); \
+ } while(0)
+
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if NRF5_QEI_USE_QDEC0 && !defined(__DOXYGEN__)
+extern QEIDriver QEID1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void qei_lld_init(void);
+ void qei_lld_start(QEIDriver *qeip);
+ void qei_lld_stop(QEIDriver *qeip);
+ void qei_lld_enable(QEIDriver *qeip);
+ void qei_lld_disable(QEIDriver *qeip);
+ qeidelta_t qei_lld_adjust_count(QEIDriver *qeip, qeidelta_t delta);
+#ifdef __cplusplus
+}
+#endif
+
+/*===========================================================================*/
+/* To be moved in hal_qei */
+/*===========================================================================*/
+
+void qeiSetCount(QEIDriver *qeip, qeicnt_t value);
+qeidelta_t qeiAdjust(QEIDriver *qeip, qeidelta_t delta);
+
+#endif /* HAL_USE_QEI */
+
+#endif /* HAL_QEI_LLD_H */
+
+/** @} */
diff --git a/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c b/os/hal/ports/NRF5/LLD/hal_rng_lld.c index 5e501ed..9712150 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c +++ b/os/hal/ports/NRF5/LLD/hal_rng_lld.c @@ -15,8 +15,8 @@ */ /** - * @file NRF51/RNGv1/rng_lld.c - * @brief NRF51 RNG subsystem low level driver source. + * @file NRF5/LLD/hal_rng_lld.c + * @brief NRF5 RNG subsystem low level driver source. * * @addtogroup RNG * @{ @@ -41,8 +41,8 @@ static const RNGConfig default_config = { /* Driver exported variables. */ /*===========================================================================*/ -/** @brief RNG1 driver identifier.*/ -#if NRF51_RNG_USE_RNG1 || defined(__DOXYGEN__) +/** @brief RNGD1 driver identifier.*/ +#if NRF5_RNG_USE_RNG0 || defined(__DOXYGEN__) RNGDriver RNGD1; #endif @@ -70,6 +70,7 @@ RNGDriver RNGD1; void rng_lld_init(void) { rngObjectInit(&RNGD1); RNGD1.rng = NRF_RNG; + RNGD1.irq = RNG_IRQn; } /** @@ -80,19 +81,29 @@ void rng_lld_init(void) { * @notapi */ void rng_lld_start(RNGDriver *rngp) { + NRF_RNG_Type *rng = rngp->rng; + + /* If not specified, set default configuration */ if (rngp->config == NULL) rngp->config = &default_config; - rngp->rng->POWER = 1; - + /* Configure digital error correction */ if (rngp->config->digital_error_correction) - rngp->rng->CONFIG |= RNG_CONFIG_DERCEN_Msk; + rng->CONFIG |= RNG_CONFIG_DERCEN_Msk; else - rngp->rng->CONFIG &= ~RNG_CONFIG_DERCEN_Msk; + rng->CONFIG &= ~RNG_CONFIG_DERCEN_Msk; + + /* Clear pending events */ + rng->EVENTS_VALRDY = 0; +#if CORTEX_MODEL >= 4 + (void)rng->EVENTS_VALRDY; +#endif + + /* Set interrupt mask */ + rng->INTENSET = RNG_INTENSET_VALRDY_Msk; - rngp->rng->EVENTS_VALRDY = 0; - rngp->rng->INTENSET = RNG_INTENSET_VALRDY_Msk; - rngp->rng->TASKS_START = 1; + /* Start */ + rng->TASKS_START = 1; } @@ -104,8 +115,10 @@ void rng_lld_start(RNGDriver *rngp) { * @notapi */ void rng_lld_stop(RNGDriver *rngp) { - rngp->rng->TASKS_STOP = 1; - rngp->rng->POWER = 0; + NRF_RNG_Type *rng = rngp->rng; + + /* Stop peripheric */ + rng->TASKS_STOP = 1; } @@ -120,6 +133,7 @@ void rng_lld_stop(RNGDriver *rngp) { */ msg_t rng_lld_write(RNGDriver *rngp, uint8_t *buf, size_t n, systime_t timeout) { + NRF_RNG_Type *rng = rngp->rng; size_t i; for (i = 0 ; i < n ; i++) { @@ -127,7 +141,7 @@ msg_t rng_lld_write(RNGDriver *rngp, uint8_t *buf, size_t n, * It take about 677µs to generate a new byte, not sure if * forcing a context switch will be a benefit */ - while (NRF_RNG->EVENTS_VALRDY == 0) { + while (rng->EVENTS_VALRDY == 0) { /* Sleep and wakeup on ARM event (interrupt) */ SCB->SCR |= SCB_SCR_SEVONPEND_Msk; __SEV(); @@ -136,13 +150,16 @@ msg_t rng_lld_write(RNGDriver *rngp, uint8_t *buf, size_t n, } /* Read byte */ - buf[i] = (char)NRF_RNG->VALUE; + buf[i] = (char)rng->VALUE; /* Mark as read */ - NRF_RNG->EVENTS_VALRDY = 0; - + rng->EVENTS_VALRDY = 0; +#if CORTEX_MODEL >= 4 + (void)rng->EVENTS_VALRDY; +#endif + /* Clear interrupt so we can wake up again */ - nvicClearPending(RNG_IRQn); + nvicClearPending(rngp->irq); } return MSG_OK; } diff --git a/os/hal/ports/NRF51/NRF51822/hal_rng_lld.h b/os/hal/ports/NRF5/LLD/hal_rng_lld.h index 0ad0bc6..5c56be2 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_rng_lld.h +++ b/os/hal/ports/NRF5/LLD/hal_rng_lld.h @@ -15,8 +15,8 @@ */ /** - * @file NRF51/NRF51822/rng_lld.h - * @brief NRF51 RNG subsystem low level driver header. + * @file NRF5/LLD/hal_rng_lld.h + * @brief NRF5 RNG subsystem low level driver header. * * @addtogroup RNG * @{ @@ -40,28 +40,19 @@ * @{ */ /** - * @brief RNG1 driver enable switch. - * @details If set to @p TRUE the support for RNG1 is included. + * @brief RNGD1 driver enable switch. + * @details If set to @p TRUE the support for RNGD1 is included. * @note The default is @p FALSE. */ -#if !defined(NRF51_RNG_USE_RNG1) || defined(__DOXYGEN__) -#define NRF51_RNG_USE_RNG1 FALSE +#if !defined(NRF5_RNG_USE_RNG0) || defined(__DOXYGEN__) +#define NRF5_RNG_USE_RNG0 FALSE #endif /** - * @brief RNG1 driver enable switch. - * @details If set to @p TRUE the support for RNG1 is included. - * @note The default is @p FALSE. - */ -#if !defined(NRF51_RNG_USE_RNG1) || defined(__DOXYGEN__) -#define NRF51_RNG_USE_POWER_ON_WRITE FALSE -#endif - -/** - * @brief RNG1 interrupt priority level setting. + * @brief RNG interrupt priority level setting for RNG0. */ -#if !defined(NRF51_RNG_RNG1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define NRF51_RNG_RNG1_IRQ_PRIORITY 3 +#if !defined(NRF5_RNG_RNG0_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define NRF5_RNG_RNG0_IRQ_PRIORITY 3 #endif @@ -69,9 +60,13 @@ /* Derived constants and error checks. */ /*===========================================================================*/ -#if NRF51_RNG_USE_RNG1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_RNG_RNG1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to RNG1" +#if NRF5_RNG_USE_RNG0 == FALSE +#error "Requesting RNG driver, but no RNG peripheric attached" +#endif + +#if NRF5_RNG_USE_RNG0 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_RNG_RNG0_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to RNG0" #endif /*===========================================================================*/ @@ -96,18 +91,11 @@ typedef struct { * speed advantage, but may result in a statistical distribution * that is not perfectly uniform. * - * @note On average, it take 167µs to get a byte without digitial - * error correction and 677µs with, but no garantee is made - * on the necessary time to generate one byte. + * @note For nRF51, on average, it take 167µs to get a byte without + * digitial error correction and 677µs with, but no garantee + * is made on the necessary time to generate one byte. */ uint8_t digital_error_correction:1; - /** - * @brief Only power the RNG device when requeting random bytes - * - * @details Device will not be powered when started/stopped - * but only when writint bytes. - */ - uint8_t power_on_write:1; } RNGConfig; @@ -134,6 +122,10 @@ struct RNGDriver { * @brief Pointer to the RNGx registers block. */ NRF_RNG_Type *rng; + /** + * @brief IRQ number + */ + uint32_t irq; }; /*===========================================================================*/ @@ -144,9 +136,9 @@ struct RNGDriver { /* External declarations. */ /*===========================================================================*/ -#if NRF51_RNG_USE_RNG1 && !defined(__DOXYGEN__) +#if NRF5_RNG_USE_RNG0 && !defined(__DOXYGEN__) extern RNGDriver RNGD1; -#endif /* NRF51_RNG_USE_RNG1 */ +#endif /* NRF5_RNG_USE_RNG0 */ #ifdef __cplusplus extern "C" { diff --git a/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c b/os/hal/ports/NRF5/LLD/hal_serial_lld.c index 029c5da..42091e8 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c +++ b/os/hal/ports/NRF5/LLD/hal_serial_lld.c @@ -15,8 +15,8 @@ */
/**
- * @file serial_lld.c
- * @brief NRF51822 serial subsystem low level driver source.
+ * @file NRF5/LLD/hal_serial_lld.c
+ * @brief NRF5 serial subsystem low level driver source.
*
* @addtogroup SERIAL
* @{
@@ -26,18 +26,24 @@ #if (HAL_USE_SERIAL == TRUE) || defined(__DOXYGEN__)
+#if NRF_SERIES == 51
#include "nrf51.h"
+#elif NRF_SERIES == 52
+#include "nrf52.h"
+#define UART0_IRQn UARTE0_UART0_IRQn
+#endif
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
+
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/** @brief USART1 serial driver identifier.*/
-#if (NRF51_SERIAL_USE_UART0 == TRUE) || defined(__DOXYGEN__)
+#if (NRF5_SERIAL_USE_UART0 == TRUE) || defined(__DOXYGEN__)
SerialDriver SD1;
#endif
@@ -50,11 +56,11 @@ SerialDriver SD1; */
static const SerialConfig default_config = {
.speed = 38400,
- .tx_pad = NRF51_SERIAL_PAD_DISCONNECTED,
- .rx_pad = NRF51_SERIAL_PAD_DISCONNECTED,
-#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE)
- .rts_pad = NRF51_SERIAL_PAD_DISCONNECTED,
- .cts_pad = NRF51_SERIAL_PAD_DISCONNECTED,
+ .tx_pad = NRF5_SERIAL_PAD_DISCONNECTED,
+ .rx_pad = NRF5_SERIAL_PAD_DISCONNECTED,
+#if (NRF5_SERIAL_USE_HWFLOWCTRL == TRUE)
+ .rts_pad = NRF5_SERIAL_PAD_DISCONNECTED,
+ .cts_pad = NRF5_SERIAL_PAD_DISCONNECTED,
#endif
};
@@ -95,17 +101,17 @@ static void configure_uart(const SerialConfig *config) };
/* Configure PINs mode */
- if (config->tx_pad != NRF51_SERIAL_PAD_DISCONNECTED) {
+ if (config->tx_pad != NRF5_SERIAL_PAD_DISCONNECTED) {
palSetPadMode(IOPORT1, config->tx_pad, PAL_MODE_OUTPUT_PUSHPULL);
}
- if (config->rx_pad != NRF51_SERIAL_PAD_DISCONNECTED) {
+ if (config->rx_pad != NRF5_SERIAL_PAD_DISCONNECTED) {
palSetPadMode(IOPORT1, config->rx_pad, PAL_MODE_INPUT);
}
-#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE)
- if (config->rts_pad != NRF51_SERIAL_PAD_DISCONNECTED) {
+#if (NRF5_SERIAL_USE_HWFLOWCTRL == TRUE)
+ if (config->rts_pad != NRF5_SERIAL_PAD_DISCONNECTED) {
palSetPadMode(IOPORT1, config->rts_pad, PAL_MODE_OUTPUT_PUSHPULL);
}
- if (config->cts_pad != NRF51_SERIAL_PAD_DISCONNECTED) {
+ if (config->cts_pad != NRF5_SERIAL_PAD_DISCONNECTED) {
palSetPadMode(IOPORT1, config->cts_pad, PAL_MODE_INPUT);
}
#endif
@@ -113,12 +119,12 @@ static void configure_uart(const SerialConfig *config) /* Select PINs used by UART */
NRF_UART0->PSELTXD = config->tx_pad;
NRF_UART0->PSELRXD = config->rx_pad;
-#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE)
+#if (NRF5_SERIAL_USE_HWFLOWCTRL == TRUE)
NRF_UART0->PSELRTS = config->rts_pad;
NRF_UART0->PSELCTS = config->cts_pad;
#else
- NRF_UART0->PSELRTS = NRF51_SERIAL_PAD_DISCONNECTED;
- NRF_UART0->PSELCTS = NRF51_SERIAL_PAD_DISCONNECTED;
+ NRF_UART0->PSELRTS = NRF5_SERIAL_PAD_DISCONNECTED;
+ NRF_UART0->PSELCTS = NRF5_SERIAL_PAD_DISCONNECTED;
#endif
/* Set baud rate */
@@ -128,7 +134,7 @@ static void configure_uart(const SerialConfig *config) NRF_UART0->CONFIG = (UART_CONFIG_PARITY_Excluded << UART_CONFIG_PARITY_Pos);
/* Adjust flow control */
-#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE)
+#if (NRF5_SERIAL_USE_HWFLOWCTRL == TRUE)
if ((config->rts_pad < TOTAL_GPIO_PADS) ||
(config->cts_pad < TOTAL_GPIO_PADS)) {
NRF_UART0->CONFIG |= UART_CONFIG_HWFC_Enabled << UART_CONFIG_HWFC_Pos;
@@ -143,9 +149,12 @@ static void configure_uart(const SerialConfig *config) NRF_UART0->ENABLE = UART_ENABLE_ENABLE_Enabled;
NRF_UART0->EVENTS_RXDRDY = 0;
NRF_UART0->EVENTS_TXDRDY = 0;
-
-
- if (config->rx_pad != NRF51_SERIAL_PAD_DISCONNECTED) {
+#if CORTEX_MODEL >= 4
+ (void)NRF_UART0->EVENTS_RXDRDY;
+ (void)NRF_UART0->EVENTS_TXDRDY;
+#endif
+
+ if (config->rx_pad != NRF5_SERIAL_PAD_DISCONNECTED) {
while (NRF_UART0->EVENTS_RXDRDY != 0) {
(void)NRF_UART0->RXD;
}
@@ -156,14 +165,14 @@ static void configure_uart(const SerialConfig *config) /**
* @brief Driver output notification.
*/
-#if NRF51_SERIAL_USE_UART0 || defined(__DOXYGEN__)
+#if NRF5_SERIAL_USE_UART0 || defined(__DOXYGEN__)
static void notify1(io_queue_t *qp)
{
SerialDriver *sdp = &SD1;
(void)qp;
- if (NRF_UART0->PSELTXD == NRF51_SERIAL_PAD_DISCONNECTED)
+ if (NRF_UART0->PSELTXD == NRF5_SERIAL_PAD_DISCONNECTED)
return;
if (!sdp->tx_busy) {
@@ -186,7 +195,7 @@ static void notify1(io_queue_t *qp) /* Driver interrupt handlers. */
/*===========================================================================*/
-#if NRF51_SERIAL_USE_UART0 || defined(__DOXYGEN__)
+#if NRF5_SERIAL_USE_UART0 || defined(__DOXYGEN__)
OSAL_IRQ_HANDLER(Vector48) {
OSAL_IRQ_PROLOGUE();
@@ -197,7 +206,10 @@ OSAL_IRQ_HANDLER(Vector48) { if ((NRF_UART0->EVENTS_RXDRDY != 0) && (isr & UART_INTENSET_RXDRDY_Msk)) {
// Clear UART RX event flag
NRF_UART0->EVENTS_RXDRDY = 0;
-
+#if CORTEX_MODEL >= 4
+ (void)NRF_UART0->EVENTS_RXDRDY;
+#endif
+
osalSysLockFromISR();
if (iqIsEmptyI(&sdp->iqueue))
chnAddFlagsI(sdp, CHN_INPUT_AVAILABLE);
@@ -211,7 +223,10 @@ OSAL_IRQ_HANDLER(Vector48) { // Clear UART TX event flag.
NRF_UART0->EVENTS_TXDRDY = 0;
-
+#if CORTEX_MODEL >= 4
+ (void)NRF_UART0->EVENTS_TXDRDY;
+#endif
+
osalSysLockFromISR();
b = oqGetI(&sdp->oqueue);
osalSysUnlockFromISR();
@@ -232,6 +247,9 @@ OSAL_IRQ_HANDLER(Vector48) { if ((NRF_UART0->EVENTS_ERROR != 0) && (isr & UART_INTENSET_ERROR_Msk)) {
// Clear UART ERROR event flag.
NRF_UART0->EVENTS_ERROR = 0;
+#if CORTEX_MODEL >= 4
+ (void)NRF_UART0->EVENTS_ERROR;
+#endif
}
@@ -250,7 +268,7 @@ OSAL_IRQ_HANDLER(Vector48) { */
void sd_lld_init(void) {
-#if NRF51_SERIAL_USE_UART0 == TRUE
+#if NRF5_SERIAL_USE_UART0 == TRUE
sdObjectInit(&SD1, NULL, notify1);
#endif
}
@@ -276,21 +294,21 @@ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) { if (sdp->state == SD_STOP) {
-#if NRF51_SERIAL_USE_UART0 == TRUE
+#if NRF5_SERIAL_USE_UART0 == TRUE
if (sdp == &SD1) {
configure_uart(config);
// Enable UART interrupt
NRF_UART0->INTENCLR = (uint32_t)-1;
NRF_UART0->INTENSET = UART_INTENSET_ERROR_Msk;
- if (config->rx_pad != NRF51_SERIAL_PAD_DISCONNECTED)
+ if (config->rx_pad != NRF5_SERIAL_PAD_DISCONNECTED)
NRF_UART0->INTENSET |= UART_INTENSET_RXDRDY_Msk;
- if (config->tx_pad != NRF51_SERIAL_PAD_DISCONNECTED)
+ if (config->tx_pad != NRF5_SERIAL_PAD_DISCONNECTED)
NRF_UART0->INTENSET |= UART_INTENSET_TXDRDY_Msk;
- nvicEnableVector(UART0_IRQn, NRF51_SERIAL_UART0_PRIORITY);
+ nvicEnableVector(UART0_IRQn, NRF5_SERIAL_UART0_PRIORITY);
- if (config->rx_pad != NRF51_SERIAL_PAD_DISCONNECTED)
+ if (config->rx_pad != NRF5_SERIAL_PAD_DISCONNECTED)
NRF_UART0->TASKS_STARTRX = 1;
}
#endif
@@ -311,7 +329,7 @@ void sd_lld_stop(SerialDriver *sdp) { if (sdp->state == SD_READY) {
-#if NRF51_SERIAL_USE_UART0 == TRUE
+#if NRF5_SERIAL_USE_UART0 == TRUE
if (&SD1 == sdp) {
nvicDisableVector(UART0_IRQn);
NRF_UART0->ENABLE = UART_ENABLE_ENABLE_Disabled;
diff --git a/os/hal/ports/NRF51/NRF51822/hal_serial_lld.h b/os/hal/ports/NRF5/LLD/hal_serial_lld.h index 79955b1..741a40a 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_serial_lld.h +++ b/os/hal/ports/NRF5/LLD/hal_serial_lld.h @@ -15,8 +15,8 @@ */
/**
- * @file serial_lld.h
- * @brief NRF51822 serial subsystem low level driver header.
+ * @file NRF5/LLD/hal_serial_lld.h
+ * @brief NRF5 serial subsystem low level driver header.
*
* @addtogroup SERIAL
* @{
@@ -45,8 +45,8 @@ * is included.
* @note The default is @p FALSE.
*/
-#if !defined(NRF51_SERIAL_USE_HWFLOWCTRL) || defined(__DOXYGEN__)
-#define NRF51_SERIAL_USE_HWFLOWCTRL FALSE
+#if !defined(NRF5_SERIAL_USE_HWFLOWCTRL) || defined(__DOXYGEN__)
+#define NRF5_SERIAL_USE_HWFLOWCTRL FALSE
#endif
/**
@@ -54,20 +54,20 @@ * @details If set to @p TRUE the support for SD1 is included.
* @note The default is @p FALSE.
*/
-#if !defined(NRF51_SERIAL_USE_UART0) || defined(__DOXYGEN__)
-#define NRF51_SERIAL_USE_UART0 FALSE
+#if !defined(NRF5_SERIAL_USE_UART0) || defined(__DOXYGEN__)
+#define NRF5_SERIAL_USE_UART0 FALSE
#endif
/**
* @brief UART0 interrupt priority level setting.
*/
-#if !defined(NRF51_SERIAL_UART0_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_SERIAL_UART0_PRIORITY 3
+#if !defined(NRF5_SERIAL_UART0_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_SERIAL_UART0_PRIORITY 3
#endif
/* Value indicating that no pad is connected to this UART register. */
-#define NRF51_SERIAL_PAD_DISCONNECTED 0xFFFFFFFFU
-#define NRF51_SERIAL_INVALID_BAUDRATE 0xFFFFFFFFU
+#define NRF5_SERIAL_PAD_DISCONNECTED 0xFFFFFFFFU
+#define NRF5_SERIAL_INVALID_BAUDRATE 0xFFFFFFFFU
/** @} */
@@ -75,8 +75,8 @@ /* Derived constants and error checks. */
/*===========================================================================*/
-#if NRF51_SERIAL_USE_UART0 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_SERIAL_UART0_PRIORITY)
+#if NRF5_SERIAL_USE_UART0 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_SERIAL_UART0_PRIORITY)
#error "Invalid IRQ priority assigned to UART0"
#endif
@@ -100,7 +100,7 @@ typedef struct { /* End of the mandatory fields.*/
uint32_t tx_pad;
uint32_t rx_pad;
-#if (NRF51_SERIAL_USE_HWFLOWCTRL == TRUE)
+#if (NRF5_SERIAL_USE_HWFLOWCTRL == TRUE)
uint32_t rts_pad;
uint32_t cts_pad;
#endif
@@ -134,7 +134,7 @@ typedef struct { /* External declarations. */
/*===========================================================================*/
-#if (NRF51_SERIAL_USE_UART0 == TRUE) && !defined(__DOXYGEN__)
+#if (NRF5_SERIAL_USE_UART0 == TRUE) && !defined(__DOXYGEN__)
extern SerialDriver SD1;
#endif
diff --git a/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c b/os/hal/ports/NRF5/LLD/hal_spi_lld.c index 7a70c13..2c6ec91 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c +++ b/os/hal/ports/NRF5/LLD/hal_spi_lld.c @@ -15,8 +15,8 @@ */
/**
- * @file NRF51822/spi_lld.c
- * @brief NRF51822 low level SPI driver code.
+ * @file NRF5/LLD/hal_spi_lld.c
+ * @brief NRF5 low level SPI driver code.
*
* @addtogroup SPI
* @{
@@ -30,12 +30,12 @@ /* Driver exported variables. */
/*===========================================================================*/
-#if NRF51_SPI_USE_SPI0 || defined(__DOXYGEN__)
+#if NRF5_SPI_USE_SPI0 || defined(__DOXYGEN__)
/** @brief SPI1 driver identifier.*/
SPIDriver SPID1;
#endif
-#if NRF51_SPI_USE_SPI1 || defined(__DOXYGEN__)
+#if NRF5_SPI_USE_SPI1 || defined(__DOXYGEN__)
/** @brief SPI2 driver identifier.*/
SPIDriver SPID2;
#endif
@@ -76,7 +76,10 @@ static void serve_interrupt(SPIDriver *spip) { // Clear SPI READY event flag
port->EVENTS_READY = 0;
-
+#if CORTEX_MODEL >= 4
+ (void)port->EVENTS_READY;
+#endif
+
if (spip->rxptr != NULL) {
*(uint8_t *)spip->rxptr++ = port->RXD;
}
@@ -107,7 +110,7 @@ static void serve_interrupt(SPIDriver *spip) { /* Driver interrupt handlers. */
/*===========================================================================*/
-#if NRF51_SPI_USE_SPI0 || defined(__DOXYGEN__)
+#if NRF5_SPI_USE_SPI0 || defined(__DOXYGEN__)
/**
* @brief SPI0 interrupt handler.
*
@@ -120,7 +123,7 @@ CH_IRQ_HANDLER(Vector4C) { CH_IRQ_EPILOGUE();
}
#endif
-#if NRF51_SPI_USE_SPI1 || defined(__DOXYGEN__)
+#if NRF5_SPI_USE_SPI1 || defined(__DOXYGEN__)
/**
* @brief SPI1 interrupt handler.
*
@@ -145,11 +148,11 @@ CH_IRQ_HANDLER(Vector50) { */
void spi_lld_init(void) {
-#if NRF51_SPI_USE_SPI0
+#if NRF5_SPI_USE_SPI0
spiObjectInit(&SPID1);
SPID1.port = NRF_SPI0;
#endif
-#if NRF51_SPI_USE_SPI1
+#if NRF5_SPI_USE_SPI1
spiObjectInit(&SPID2);
SPID2.port = NRF_SPI1;
#endif
@@ -166,13 +169,13 @@ void spi_lld_start(SPIDriver *spip) { uint32_t config;
if (spip->state == SPI_STOP) {
-#if NRF51_SPI_USE_SPI0
+#if NRF5_SPI_USE_SPI0
if (&SPID1 == spip)
- nvicEnableVector(SPI0_TWI0_IRQn, NRF51_SPI_SPI0_IRQ_PRIORITY);
+ nvicEnableVector(SPI0_TWI0_IRQn, NRF5_SPI_SPI0_IRQ_PRIORITY);
#endif
-#if NRF51_SPI_USE_SPI1
+#if NRF5_SPI_USE_SPI1
if (&SPID2 == spip)
- nvicEnableVector(SPI1_TWI1_IRQn, NRF51_SPI_SPI1_IRQ_PRIORITY);
+ nvicEnableVector(SPI1_TWI1_IRQn, NRF5_SPI_SPI1_IRQ_PRIORITY);
#endif
}
@@ -201,14 +204,23 @@ void spi_lld_start(SPIDriver *spip) { /* Configuration.*/
spip->port->CONFIG = config;
+#if NRF_SERIES == 51
spip->port->PSELSCK = spip->config->sckpad;
spip->port->PSELMOSI = spip->config->mosipad;
spip->port->PSELMISO = spip->config->misopad;
+#else
+ spip->port->PSEL.SCK = spip->config->sckpad;
+ spip->port->PSEL.MOSI = spip->config->mosipad;
+ spip->port->PSEL.MISO = spip->config->misopad;
+#endif
spip->port->FREQUENCY = spip->config->freq;
spip->port->ENABLE = (SPI_ENABLE_ENABLE_Enabled << SPI_ENABLE_ENABLE_Pos);
/* clear events flag */
spip->port->EVENTS_READY = 0;
+#if CORTEX_MODEL >= 4
+ (void)spip->port->EVENTS_READY;
+#endif
}
/**
@@ -223,11 +235,11 @@ void spi_lld_stop(SPIDriver *spip) { if (spip->state != SPI_STOP) {
spip->port->ENABLE = (SPI_ENABLE_ENABLE_Disabled << SPI_ENABLE_ENABLE_Pos);
spip->port->INTENCLR = (SPI_INTENCLR_READY_Clear << SPI_INTENCLR_READY_Pos);
-#if NRF51_SPI_USE_SPI0
+#if NRF5_SPI_USE_SPI0
if (&SPID1 == spip)
nvicDisableVector(SPI0_TWI0_IRQn);
#endif
-#if NRF51_SPI_USE_SPI1
+#if NRF5_SPI_USE_SPI1
if (&SPID2 == spip)
nvicDisableVector(SPI1_TWI1_IRQn);
#endif
@@ -366,6 +378,9 @@ uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame) { while (spip->port->EVENTS_READY == 0)
;
spip->port->EVENTS_READY = 0;
+#if CORTEX_MODEL >= 4
+ (void)spip->port->EVENTS_READY;
+#endif
return spip->port->RXD;
}
diff --git a/os/hal/ports/NRF51/NRF51822/hal_spi_lld.h b/os/hal/ports/NRF5/LLD/hal_spi_lld.h index 4d1c452..afad5ab 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_spi_lld.h +++ b/os/hal/ports/NRF5/LLD/hal_spi_lld.h @@ -15,8 +15,8 @@ */
/**
- * @file NRF51822/spi_lld.h
- * @brief NRF51822 low level SPI driver header.
+ * @file NRF/LLD/hal_spi_lld.h
+ * @brief NRF5 low level SPI driver header.
*
* @addtogroup SPI
* @{
@@ -38,40 +38,40 @@ /**
* @brief SPI0 interrupt priority level setting.
*/
-#if !defined(NRF51_SPI_SPI0_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_SPI_SPI0_IRQ_PRIORITY 3
+#if !defined(NRF5_SPI_SPI0_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_SPI_SPI0_IRQ_PRIORITY 3
#endif
/**
* @brief SPI1 interrupt priority level setting.
*/
-#if !defined(NRF51_SPI_SPI1_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_SPI_SPI1_IRQ_PRIORITY 3
+#if !defined(NRF5_SPI_SPI1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_SPI_SPI1_IRQ_PRIORITY 3
#endif
/**
* @brief Overflow error hook.
* @details The default action is to stop the system.
*/
-#if !defined(NRF51_SPI_SPI_ERROR_HOOK) || defined(__DOXYGEN__)
-#define NRF51_SPI_SPI_ERROR_HOOK() chSysHalt()
+#if !defined(NRF5_SPI_SPI_ERROR_HOOK) || defined(__DOXYGEN__)
+#define NRF5_SPI_SPI_ERROR_HOOK() chSysHalt()
#endif
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
-#if !NRF51_SPI_USE_SPI0 && !NRF51_SPI_USE_SPI1
+#if !NRF5_SPI_USE_SPI0 && !NRF5_SPI_USE_SPI1
#error "SPI driver activated but no SPI peripheral assigned"
#endif
-#if NRF51_SPI_USE_SPI0 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_SPI_SPI0_IRQ_PRIORITY)
+#if NRF5_SPI_USE_SPI0 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_SPI_SPI0_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to SPI0"
#endif
-#if NRF51_SPI_USE_SPI1 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_SPI_SPI1_IRQ_PRIORITY)
+#if NRF5_SPI_USE_SPI1 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_SPI_SPI1_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to SPI1"
#endif
@@ -96,13 +96,13 @@ typedef void (*spicallback_t)(SPIDriver *spip); * @brief SPI frequency
*/
typedef enum {
- NRF51_SPI_FREQ_125KBPS = (SPI_FREQUENCY_FREQUENCY_K125 << SPI_FREQUENCY_FREQUENCY_Pos),
- NRF51_SPI_FREQ_250KBPS = (SPI_FREQUENCY_FREQUENCY_K250 << SPI_FREQUENCY_FREQUENCY_Pos),
- NRF51_SPI_FREQ_500KBPS = (SPI_FREQUENCY_FREQUENCY_K500 << SPI_FREQUENCY_FREQUENCY_Pos),
- NRF51_SPI_FREQ_1MBPS = (SPI_FREQUENCY_FREQUENCY_M1 << SPI_FREQUENCY_FREQUENCY_Pos),
- NRF51_SPI_FREQ_2MBPS = (SPI_FREQUENCY_FREQUENCY_M2 << SPI_FREQUENCY_FREQUENCY_Pos),
- NRF51_SPI_FREQ_4MBPS = (SPI_FREQUENCY_FREQUENCY_M4 << SPI_FREQUENCY_FREQUENCY_Pos),
- NRF51_SPI_FREQ_8MBPS = (SPI_FREQUENCY_FREQUENCY_M8 << SPI_FREQUENCY_FREQUENCY_Pos),
+ NRF5_SPI_FREQ_125KBPS = (SPI_FREQUENCY_FREQUENCY_K125 << SPI_FREQUENCY_FREQUENCY_Pos),
+ NRF5_SPI_FREQ_250KBPS = (SPI_FREQUENCY_FREQUENCY_K250 << SPI_FREQUENCY_FREQUENCY_Pos),
+ NRF5_SPI_FREQ_500KBPS = (SPI_FREQUENCY_FREQUENCY_K500 << SPI_FREQUENCY_FREQUENCY_Pos),
+ NRF5_SPI_FREQ_1MBPS = (SPI_FREQUENCY_FREQUENCY_M1 << SPI_FREQUENCY_FREQUENCY_Pos),
+ NRF5_SPI_FREQ_2MBPS = (SPI_FREQUENCY_FREQUENCY_M2 << SPI_FREQUENCY_FREQUENCY_Pos),
+ NRF5_SPI_FREQ_4MBPS = (SPI_FREQUENCY_FREQUENCY_M4 << SPI_FREQUENCY_FREQUENCY_Pos),
+ NRF5_SPI_FREQ_8MBPS = (SPI_FREQUENCY_FREQUENCY_M8 << SPI_FREQUENCY_FREQUENCY_Pos),
} spifreq_t;
/**
@@ -206,10 +206,10 @@ struct SPIDriver { /* External declarations. */
/*===========================================================================*/
-#if NRF51_SPI_USE_SPI0 && !defined(__DOXYGEN__)
+#if NRF5_SPI_USE_SPI0 && !defined(__DOXYGEN__)
extern SPIDriver SPID1;
#endif
-#if NRF51_SPI_USE_SPI1 && !defined(__DOXYGEN__)
+#if NRF5_SPI_USE_SPI1 && !defined(__DOXYGEN__)
extern SPIDriver SPID2;
#endif
diff --git a/os/hal/ports/NRF51/NRF51822/hal_st_lld.c b/os/hal/ports/NRF5/LLD/hal_st_lld.c index 181bc06..8e42029 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_st_lld.c +++ b/os/hal/ports/NRF5/LLD/hal_st_lld.c @@ -16,8 +16,8 @@ */
/**
- * @file st_lld.c
- * @brief NRF51822 ST subsystem low level driver source.
+ * @file NRF5/LLD/hal_st_lld.c
+ * @brief NRF5 ST subsystem low level driver source.
*
* @addtogroup ST
* @{
@@ -52,11 +52,11 @@ /*===========================================================================*/
#if (OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) || defined(__DOXYGEN__)
-#if NRF51_ST_USE_RTC0 == TRUE
+#if NRF5_ST_USE_RTC0 == TRUE
/**
* @brief System Timer vector (RTC0)
* @details This interrupt is used for system tick in periodic mode
- * if selected with NRF51_ST_USE_RTC0
+ * if selected with NRF5_ST_USE_RTC0
*
* @isr
*/
@@ -65,7 +65,10 @@ OSAL_IRQ_HANDLER(Vector6C) { OSAL_IRQ_PROLOGUE();
NRF_RTC0->EVENTS_TICK = 0;
-
+#if CORTEX_MODEL >= 4
+ (void)NRF_RTC0->EVENTS_TICK;
+#endif
+
osalSysLockFromISR();
osalOsTimerHandlerI();
osalSysUnlockFromISR();
@@ -74,11 +77,11 @@ OSAL_IRQ_HANDLER(Vector6C) { }
#endif
-#if NRF51_ST_USE_RTC1 == TRUE
+#if NRF5_ST_USE_RTC1 == TRUE
/**
* @brief System Timer vector (RTC1)
* @details This interrupt is used for system tick in periodic mode
- * if selected with NRF51_ST_USE_RTC1
+ * if selected with NRF5_ST_USE_RTC1
*
* @isr
*/
@@ -87,7 +90,10 @@ OSAL_IRQ_HANDLER(Vector84) { OSAL_IRQ_PROLOGUE();
NRF_RTC1->EVENTS_TICK = 0;
-
+#if CORTEX_MODEL >= 4
+ (void)NRF_RTC1->EVENTS_TICK;
+#endif
+
osalSysLockFromISR();
osalOsTimerHandlerI();
osalSysUnlockFromISR();
@@ -96,11 +102,11 @@ OSAL_IRQ_HANDLER(Vector84) { }
#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
+#if NRF5_ST_USE_TIMER0 == TRUE
/**
* @brief System Timer vector. (TIMER0)
* @details This interrupt is used for system tick in periodic mode
- * if selected with NRF51_ST_USE_TIMER0
+ * if selected with NRF5_ST_USE_TIMER0
*
* @isr
*/
@@ -109,12 +115,16 @@ OSAL_IRQ_HANDLER(Vector60) { OSAL_IRQ_PROLOGUE();
/* Clear timer compare event */
- if (NRF_TIMER0->EVENTS_COMPARE[0] != 0)
+ if (NRF_TIMER0->EVENTS_COMPARE[0] != 0) {
NRF_TIMER0->EVENTS_COMPARE[0] = 0;
-
- osalSysLockFromISR();
- osalOsTimerHandlerI();
- osalSysUnlockFromISR();
+#if CORTEX_MODEL >= 4
+ (void)NRF_TIMER0->EVENTS_COMPARE[0];
+#endif
+
+ osalSysLockFromISR();
+ osalOsTimerHandlerI();
+ osalSysUnlockFromISR();
+ }
OSAL_IRQ_EPILOGUE();
}
@@ -122,11 +132,11 @@ OSAL_IRQ_HANDLER(Vector60) { #endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */
#if (OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING) || defined(__DOXYGEN__)
-#if NRF51_ST_USE_RTC0 == TRUE
+#if NRF5_ST_USE_RTC0 == TRUE
/**
* @brief System Timer vector (RTC0)
* @details This interrupt is used for freerunning mode (tick-less)
- * if selected with NRF51_ST_USE_RTC0
+ * if selected with NRF5_ST_USE_RTC0
*
* @isr
*/
@@ -136,7 +146,10 @@ OSAL_IRQ_HANDLER(Vector6C) { if (NRF_RTC0->EVENTS_COMPARE[0]) {
NRF_RTC0->EVENTS_COMPARE[0] = 0;
-
+#if CORTEX_MODEL >= 4
+ (void)NRF_RTC0->EVENTS_COMPARE[0];
+#endif
+
osalSysLockFromISR();
osalOsTimerHandlerI();
osalSysUnlockFromISR();
@@ -145,6 +158,9 @@ OSAL_IRQ_HANDLER(Vector6C) { #if OSAL_ST_RESOLUTION == 16
if (NRF_RTC0->EVENTS_COMPARE[1]) {
NRF_RTC0->EVENTS_COMPARE[1] = 0;
+#if CORTEX_MODEL >= 4
+ (void)NRF_RTC0->EVENTS_COMPARE[1];
+#endif
NRF_RTC0->TASKS_CLEAR = 1;
}
#endif
@@ -153,11 +169,11 @@ OSAL_IRQ_HANDLER(Vector6C) { }
#endif
-#if NRF51_ST_USE_RTC1 == TRUE
+#if NRF5_ST_USE_RTC1 == TRUE
/**
* @brief System Timer vector (RTC1)
* @details This interrupt is used for freerunning mode (tick-less)
- * if selected with NRF51_ST_USE_RTC1
+ * if selected with NRF5_ST_USE_RTC1
*
* @isr
*/
@@ -167,7 +183,10 @@ OSAL_IRQ_HANDLER(Vector84) { if (NRF_RTC1->EVENTS_COMPARE[0]) {
NRF_RTC1->EVENTS_COMPARE[0] = 0;
-
+#if CORTEX_MODEL >= 4
+ (void)NRF_RTC1->EVENTS_COMPARE[0];
+#endif
+
osalSysLockFromISR();
osalOsTimerHandlerI();
osalSysUnlockFromISR();
@@ -176,6 +195,9 @@ OSAL_IRQ_HANDLER(Vector84) { #if OSAL_ST_RESOLUTION == 16
if (NRF_RTC1->EVENTS_COMPARE[1]) {
NRF_RTC1->EVENTS_COMPARE[1] = 0;
+#if CORTEX_MODEL >= 4
+ (void)NRF_RTC1->EVENTS_COMPARE[1];
+#endif
NRF_RTC1->TASKS_CLEAR = 1;
}
#endif
@@ -197,80 +219,92 @@ OSAL_IRQ_HANDLER(Vector84) { void st_lld_init(void) {
#if OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING
-#if NRF51_ST_USE_RTC0 == TRUE
+#if NRF5_ST_USE_RTC0 == TRUE
/* Using RTC with prescaler */
NRF_RTC0->TASKS_STOP = 1;
- NRF_RTC0->PRESCALER = (NRF51_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1;
+ NRF_RTC0->PRESCALER = (NRF5_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1;
NRF_RTC0->EVTENCLR = RTC_EVTENSET_COMPARE0_Msk;
NRF_RTC0->EVENTS_COMPARE[0] = 0;
+#if CORTEX_MODEL >= 4
+ (void)NRF_RTC0->EVENTS_COMPARE[0];
+#endif
NRF_RTC0->INTENSET = RTC_INTENSET_COMPARE0_Msk;
#if OSAL_ST_RESOLUTION == 16
NRF_RTC0->CC[1] = 0x10000; /* 2^16 */
NRF_RTC0->EVENTS_COMPARE[1] = 0;
+#if CORTEX_MODEL >= 4
+ (void)NRF_RTC0->EVENTS_COMPARE[1];
+#endif
NRF_RTC0->EVTENSET = RTC_EVTENSET_COMPARE0_Msk;
NRF_RTC0->INTENSET = RTC_INTENSET_COMPARE1_Msk;
#endif
NRF_RTC0->TASKS_CLEAR = 1;
/* Start timer */
- nvicEnableVector(RTC0_IRQn, NRF51_ST_PRIORITY);
+ nvicEnableVector(RTC0_IRQn, NRF5_ST_PRIORITY);
NRF_RTC0->TASKS_START = 1;
-#endif /* NRF51_ST_USE_RTC0 == TRUE */
+#endif /* NRF5_ST_USE_RTC0 == TRUE */
-#if NRF51_ST_USE_RTC1 == TRUE
+#if NRF5_ST_USE_RTC1 == TRUE
/* Using RTC with prescaler */
NRF_RTC1->TASKS_STOP = 1;
- NRF_RTC1->PRESCALER = (NRF51_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1;
+ NRF_RTC1->PRESCALER = (NRF5_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1;
NRF_RTC1->EVTENCLR = RTC_EVTENSET_COMPARE0_Msk;
NRF_RTC1->EVENTS_COMPARE[0] = 0;
+#if CORTEX_MODEL >= 4
+ (void)NRF_RTC1->EVENTS_COMPARE[0];
+#endif
NRF_RTC1->INTENSET = RTC_INTENSET_COMPARE0_Msk;
#if OSAL_ST_RESOLUTION == 16
NRF_RTC1->CC[1] = 0x10000; /* 2^16 */
NRF_RTC1->EVENTS_COMPARE[1] = 0;
+#if CORTEX_MODEL >= 4
+ NRF_RTC1->EVENTS_COMPARE[1];
+#endif
NRF_RTC1->EVTENSET = RTC_EVTENSET_COMPARE0_Msk;
NRF_RTC1->INTENSET = RTC_INTENSET_COMPARE1_Msk;
#endif
NRF_RTC1->TASKS_CLEAR = 1;
/* Start timer */
- nvicEnableVector(RTC1_IRQn, NRF51_ST_PRIORITY);
+ nvicEnableVector(RTC1_IRQn, NRF5_ST_PRIORITY);
NRF_RTC1->TASKS_START = 1;
-#endif /* NRF51_ST_USE_RTC1 == TRUE */
+#endif /* NRF5_ST_USE_RTC1 == TRUE */
#endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */
#if OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC
-#if NRF51_ST_USE_RTC0 == TRUE
+#if NRF5_ST_USE_RTC0 == TRUE
/* Using RTC with prescaler */
NRF_RTC0->TASKS_STOP = 1;
- NRF_RTC0->PRESCALER = (NRF51_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1;
+ NRF_RTC0->PRESCALER = (NRF5_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1;
NRF_RTC0->INTENSET = RTC_INTENSET_TICK_Msk;
/* Start timer */
- nvicEnableVector(RTC0_IRQn, NRF51_ST_PRIORITY);
+ nvicEnableVector(RTC0_IRQn, NRF5_ST_PRIORITY);
NRF_RTC0->TASKS_START = 1;
-#endif /* NRF51_ST_USE_RTC0 == TRUE */
+#endif /* NRF5_ST_USE_RTC0 == TRUE */
-#if NRF51_ST_USE_RTC1 == TRUE
+#if NRF5_ST_USE_RTC1 == TRUE
/* Using RTC with prescaler */
NRF_RTC1->TASKS_STOP = 1;
- NRF_RTC1->PRESCALER = (NRF51_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1;
+ NRF_RTC1->PRESCALER = (NRF5_LFCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1;
NRF_RTC1->INTENSET = RTC_INTENSET_TICK_Msk;
/* Start timer */
- nvicEnableVector(RTC1_IRQn, NRF51_ST_PRIORITY);
+ nvicEnableVector(RTC1_IRQn, NRF5_ST_PRIORITY);
NRF_RTC1->TASKS_START = 1;
-#endif /* NRF51_ST_USE_RTC1 == TRUE */
+#endif /* NRF5_ST_USE_RTC1 == TRUE */
-#if NRF51_ST_USE_TIMER0 == TRUE
+#if NRF5_ST_USE_TIMER0 == TRUE
NRF_TIMER0->TASKS_CLEAR = 1;
/*
- * Using 32-bit mode with prescaler 16 configures this
- * timer with a 1MHz clock.
+ * Using 32-bit mode with prescaler 1/16 configures this
+ * timer with a 1MHz clock, reducing power consumption.
*/
- NRF_TIMER0->BITMODE = 3;
+ NRF_TIMER0->BITMODE = TIMER_BITMODE_BITMODE_32Bit;
NRF_TIMER0->PRESCALER = 4;
/*
@@ -279,12 +313,12 @@ void st_lld_init(void) { */
NRF_TIMER0->CC[0] = (1000000 / OSAL_ST_FREQUENCY) - 1;
NRF_TIMER0->SHORTS = 1;
- NRF_TIMER0->INTENSET = 0x10000;
+ NRF_TIMER0->INTENSET = TIMER_INTENSET_COMPARE0_Msk;
/* Start timer */
- nvicEnableVector(TIMER0_IRQn, NRF51_ST_PRIORITY);
+ nvicEnableVector(TIMER0_IRQn, NRF5_ST_PRIORITY);
NRF_TIMER0->TASKS_START = 1;
-#endif /* NRF51_ST_USE_TIMER0 == TRUE */
+#endif /* NRF5_ST_USE_TIMER0 == TRUE */
#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */
}
diff --git a/os/hal/ports/NRF51/NRF51822/hal_st_lld.h b/os/hal/ports/NRF5/LLD/hal_st_lld.h index 8d12d2e..93c2abb 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_st_lld.h +++ b/os/hal/ports/NRF5/LLD/hal_st_lld.h @@ -15,8 +15,8 @@ */
/**
- * @file st_lld.h
- * @brief NRF51822 ST subsystem low level driver header.
+ * @file NRF5/LLD/st_lld.h
+ * @brief NRF5 ST subsystem low level driver header.
* @details This header is designed to be include-able without having to
* include other files from the HAL.
*
@@ -39,41 +39,38 @@ /**
* @brief Use RTC0 to generates system ticks
+ *
+ * @note Avoid using RTC0, as PPI has pre-programmed channels on it
+ * that can be used to control RADIO or TIMER0
*/
-#if !defined(NRF51_ST_USE_RTC0) || defined(__DOXYGEN__)
-#if !defined(SOFTDEVICE_PRESENT)
-#define NRF51_ST_USE_RTC0 TRUE
-#else
-#define NRF51_ST_USE_RTC0 FALSE
-#endif
+#if !defined(NRF5_ST_USE_RTC0) || defined(__DOXYGEN__)
+#define NRF5_ST_USE_RTC0 FALSE
#endif
/**
* @brief Use RTC1 to generates system ticks
*/
-#if !defined(NRF51_ST_USE_RTC1) || defined(__DOXYGEN__)
-#if !defined(SOFTDEVICE_PRESENT)
-#define NRF51_ST_USE_RTC1 FALSE
-#else
-#define NRF51_ST_USE_RTC1 TRUE
-#endif
+#if !defined(NRF5_ST_USE_RTC1) || defined(__DOXYGEN__)
+#define NRF5_ST_USE_RTC1 TRUE
#endif
/**
* @brief Use TIMER0 to generates system ticks
+ *
+ * @note Avoid using TIMER0 as it will draw more current
*/
-#if !defined(NRF51_ST_USE_TIMER0) || defined(__DOXYGEN__)
-#define NRF51_ST_USE_TIMER0 FALSE
+#if !defined(NRF5_ST_USE_TIMER0) || defined(__DOXYGEN__)
+#define NRF5_ST_USE_TIMER0 FALSE
#endif
/**
* @brief ST interrupt priority level setting.
*/
-#if !defined(NRF51_ST_PRIORITY) || defined(__DOXYGEN__)
+#if !defined(NRF5_ST_PRIORITY) || defined(__DOXYGEN__)
#if !defined(SOFTDEVICE_PRESENT)
-#define NRF51_ST_PRIORITY 1
+#define NRF5_ST_PRIORITY CORTEX_MAX_KERNEL_PRIORITY
#else
-#define NRF51_ST_PRIORITY 1
+#define NRF5_ST_PRIORITY 1
#endif
#endif
@@ -82,32 +79,32 @@ /*===========================================================================*/
#if OSAL_ST_MODE != OSAL_ST_MODE_NONE
-#if (NRF51_ST_USE_TIMER0 == TRUE) && (NRF51_GPT_USE_TIMER0 == TRUE)
+#if (NRF5_ST_USE_TIMER0 == TRUE) && (NRF5_GPT_USE_TIMER0 == TRUE)
#error "TIMER0 already used by GPT driver"
#endif
-#if (NRF51_ST_USE_RTC0 == FALSE) && \
- (NRF51_ST_USE_RTC1 == FALSE) && \
- (NRF51_ST_USE_TIMER0 == FALSE)
+#if (NRF5_ST_USE_RTC0 == FALSE) && \
+ (NRF5_ST_USE_RTC1 == FALSE) && \
+ (NRF5_ST_USE_TIMER0 == FALSE)
#error "One clock source is needed, enable one (RTC0, RTC1, or TIMER0)"
#endif
-#if ((NRF51_ST_USE_RTC0 == TRUE ? 1 : 0) + \
- (NRF51_ST_USE_RTC1 == TRUE ? 1 : 0) + \
- (NRF51_ST_USE_TIMER0 == TRUE ? 1 : 0)) > 1
+#if ((NRF5_ST_USE_RTC0 == TRUE ? 1 : 0) + \
+ (NRF5_ST_USE_RTC1 == TRUE ? 1 : 0) + \
+ (NRF5_ST_USE_TIMER0 == TRUE ? 1 : 0)) > 1
#error "Only one clock source can be used (RTC0, RTC1, or TIMER0)"
#endif
#if defined(SOFTDEVICE_PRESENT)
-#if NRF51_ST_USE_RTC0 == TRUE
+#if NRF5_ST_USE_RTC0 == TRUE
#error "RTC0 cannot be used for system ticks when SOFTDEVICE present"
#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
+#if NRF5_ST_USE_TIMER0 == TRUE
#error "TIMER0 cannot be used for system ticks when SOFTDEVICE present"
#endif
-#if NRF51_ST_PRIORITY != 1
+#if NRF5_ST_PRIORITY != 1
#error "ST priority must be 1 when SOFTDEVICE present"
#endif
@@ -118,15 +115,16 @@ #if defined(CH_CFG_ST_TIMEDELTA) && (CH_CFG_ST_TIMEDELTA < 5)
#error "CH_CFG_ST_TIMEDELTA is too low"
#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
+#if NRF5_ST_USE_TIMER0 == TRUE
#error "Freeruning (tick-less) mode not supported with TIMER, use RTC"
#endif
#endif /* OSAL_ST_MODE == OSAL_ST_MODE_FREERUNNING */
-#if !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_ST_PRIORITY)
+#if !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_ST_PRIORITY)
#error "Invalid IRQ priority assigned to ST driver"
#endif
+
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
@@ -159,13 +157,13 @@ extern "C" { * @notapi
*/
static inline systime_t st_lld_get_counter(void) {
-#if NRF51_ST_USE_RTC0 == TRUE
+#if NRF5_ST_USE_RTC0 == TRUE
return (systime_t)NRF_RTC0->COUNTER;
#endif
-#if NRF51_ST_USE_RTC1 == TRUE
+#if NRF5_ST_USE_RTC1 == TRUE
return (systime_t)NRF_RTC1->COUNTER;
#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
+#if NRF5_ST_USE_TIMER0 == TRUE
return (systime_t)0;
#endif
}
@@ -180,17 +178,23 @@ static inline systime_t st_lld_get_counter(void) { * @notapi
*/
static inline void st_lld_start_alarm(systime_t abstime) {
-#if NRF51_ST_USE_RTC0 == TRUE
+#if NRF5_ST_USE_RTC0 == TRUE
NRF_RTC0->CC[0] = abstime;
NRF_RTC0->EVENTS_COMPARE[0] = 0;
+#if CORTEX_MODEL >= 4
+ (void)NRF_RTC0->EVENTS_COMPARE[0];
+#endif
NRF_RTC0->EVTENSET = RTC_EVTENSET_COMPARE0_Msk;
#endif
-#if NRF51_ST_USE_RTC1 == TRUE
+#if NRF5_ST_USE_RTC1 == TRUE
NRF_RTC1->CC[0] = abstime;
NRF_RTC1->EVENTS_COMPARE[0] = 0;
+#if CORTEX_MODEL >= 4
+ (void)NRF_RTC1->EVENTS_COMPARE[0];
+#endif
NRF_RTC1->EVTENSET = RTC_EVTENSET_COMPARE0_Msk;
#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
+#if NRF5_ST_USE_TIMER0 == TRUE
(void)abstime;
#endif
}
@@ -201,13 +205,19 @@ static inline void st_lld_start_alarm(systime_t abstime) { * @notapi
*/
static inline void st_lld_stop_alarm(void) {
-#if NRF51_ST_USE_RTC0 == TRUE
+#if NRF5_ST_USE_RTC0 == TRUE
NRF_RTC0->EVTENCLR = RTC_EVTENCLR_COMPARE0_Msk;
NRF_RTC0->EVENTS_COMPARE[0] = 0;
+#if CORTEX_MODEL >= 4
+ (void)NRF_RTC0->EVENTS_COMPARE[0];
+#endif
#endif
-#if NRF51_ST_USE_RTC1 == TRUE
+#if NRF5_ST_USE_RTC1 == TRUE
NRF_RTC1->EVTENCLR = RTC_EVTENCLR_COMPARE0_Msk;
NRF_RTC1->EVENTS_COMPARE[0] = 0;
+#if CORTEX_MODEL >= 4
+ (void)NRF_RTC1->EVENTS_COMPARE[0];
+#endif
#endif
}
@@ -219,13 +229,13 @@ static inline void st_lld_stop_alarm(void) { * @notapi
*/
static inline void st_lld_set_alarm(systime_t abstime) {
-#if NRF51_ST_USE_RTC0 == TRUE
+#if NRF5_ST_USE_RTC0 == TRUE
NRF_RTC0->CC[0] = abstime;
#endif
-#if NRF51_ST_USE_RTC1 == TRUE
+#if NRF5_ST_USE_RTC1 == TRUE
NRF_RTC1->CC[0] = abstime;
#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
+#if NRF5_ST_USE_TIMER0 == TRUE
(void)abstime;
#endif
}
@@ -238,13 +248,13 @@ static inline void st_lld_set_alarm(systime_t abstime) { * @notapi
*/
static inline systime_t st_lld_get_alarm(void) {
-#if NRF51_ST_USE_RTC0 == TRUE
+#if NRF5_ST_USE_RTC0 == TRUE
return (systime_t)NRF_RTC0->CC[0];
#endif
-#if NRF51_ST_USE_RTC1 == TRUE
+#if NRF5_ST_USE_RTC1 == TRUE
return (systime_t)NRF_RTC1->CC[0];
#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
+#if NRF5_ST_USE_TIMER0 == TRUE
return (systime_t)0;
#endif
}
@@ -259,13 +269,13 @@ static inline systime_t st_lld_get_alarm(void) { * @notapi
*/
static inline bool st_lld_is_alarm_active(void) {
-#if NRF51_ST_USE_RTC0 == TRUE
+#if NRF5_ST_USE_RTC0 == TRUE
return NRF_RTC0->EVTEN & RTC_EVTEN_COMPARE0_Msk;
#endif
-#if NRF51_ST_USE_RTC1 == TRUE
+#if NRF5_ST_USE_RTC1 == TRUE
return NRF_RTC1->EVTEN & RTC_EVTEN_COMPARE0_Msk;
#endif
-#if NRF51_ST_USE_TIMER0 == TRUE
+#if NRF5_ST_USE_TIMER0 == TRUE
return false;
#endif
}
diff --git a/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c b/os/hal/ports/NRF5/LLD/hal_wdg_lld.c index 0ce37ee..35c079f 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c +++ b/os/hal/ports/NRF5/LLD/hal_wdg_lld.c @@ -15,8 +15,8 @@ */
/**
- * @file NRF51822/wdg_lld.c
- * @brief WDG Driver subsystem low level driver source template.
+ * @file NRF5/LLD/hal_wdg_lld.c
+ * @brief NRF5 Watchdog Driver subsystem low level driver source template.
*
* @addtogroup WDG
* @{
@@ -55,12 +55,12 @@ WDGDriver WDGD1; * @brief Watchdog vector.
* @details This interrupt is used when watchdog timeout.
*
- * @note Only 2 cycles at NRF51_LFCLK_FREQUENCY are available
+ * @note Only 2 cycles at NRF5_LFCLK_FREQUENCY are available
* to they good bye.
*
* @isr
*/
-OSAL_IRQ_HANDLER(Vector84) {
+OSAL_IRQ_HANDLER(Vector80) {
OSAL_IRQ_PROLOGUE();
osalSysLockFromISR();
@@ -101,18 +101,25 @@ void wdg_lld_init(void) { * @notapi
*/
void wdg_lld_start(WDGDriver *wdgp) {
+ osalDbgAssert((wdgp->state == WDG_STOP),
+ "This WDG driver cannot be restarted once activated");
+
+ /* Generate interrupt on timeout */
#if WDG_USE_TIMEOUT_CALLBACK == TRUE
wdgp->wdt->INTENSET = WDT_INTENSET_TIMEOUT_Msk;
#endif
/* When to pause? (halt, sleep) */
- wdgp->wdt->CONFIG =
- (wdgp->config->flags.pause_on_sleep * WDT_CONFIG_SLEEP_Msk) |
- (wdgp->config->flags.pause_on_halt * WDT_CONFIG_HALT_Msk );
+ uint32_t config = 0;
+ if (!wdgp->config->pause_on_sleep)
+ config |= WDT_CONFIG_SLEEP_Msk;
+ if (!wdgp->config->pause_on_halt)
+ config |= WDT_CONFIG_HALT_Msk;
+ wdgp->wdt->CONFIG = config;
/* Timeout in milli-seconds */
- uint64_t tout = (NRF51_LFCLK_FREQUENCY * wdgp->config->timeout_ms / 1000) - 1;
- osalDbgAssert(tout <= 0xFFFFFFFF, "watchdog timout value exceeded");
+ uint64_t tout = (NRF5_LFCLK_FREQUENCY * wdgp->config->timeout_ms / 1000) - 1;
+ osalDbgAssert(tout <= 0xFFFFFFFF, "watchdog timout value exceeded");
wdgp->wdt->CRV = (uint32_t)tout;
/* Reload request (using RR0) */
@@ -131,7 +138,7 @@ void wdg_lld_start(WDGDriver *wdgp) { */
void wdg_lld_stop(WDGDriver *wdgp) {
(void)wdgp;
- osalDbgAssert(false, "WDG cannot be stopped once activated");
+ osalDbgAssert(false, "This WDG driver cannot be stopped once activated");
}
/**
diff --git a/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.h b/os/hal/ports/NRF5/LLD/hal_wdg_lld.h index 8fea304..109b67e 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.h +++ b/os/hal/ports/NRF5/LLD/hal_wdg_lld.h @@ -15,8 +15,8 @@ */
/**
- * @file NRF51822/wdg_lld.h
- * @brief WDG Driver subsystem low level driver header template.
+ * @file NRF5/LLD/hal_wdg_lld.h
+ * @brief NRF5 Watchdog Driver subsystem low level driver header template.
*
* @addtogroup WDG
* @{
@@ -32,7 +32,7 @@ /*===========================================================================*/
#define WDG_MAX_TIMEOUT_MS \
- ((uint32_t)(0xFFFFFFFFu * 1000 / NRF51_LFCLK_FREQUENCY))
+ ((uint32_t)(0xFFFFFFFFu * 1000 / NRF5_LFCLK_FREQUENCY))
/*===========================================================================*/
/* Driver pre-compile time settings. */
@@ -72,11 +72,27 @@ typedef struct WDGDriver WDGDriver; */
typedef struct {
struct {
- uint8_t pause_on_sleep : 1;
- uint8_t pause_on_halt : 1;
- } flags;
+ /**
+ * @brief Pause watchdog while the CPU is sleeping
+ */
+ uint8_t pause_on_sleep : 1;
+ /**
+ * @brief Pause watchdog while the CPU is halted by the debugger
+ */
+ uint8_t pause_on_halt : 1;
+ };
+ /**
+ *
+ */
uint32_t timeout_ms;
#if WDG_USE_TIMEOUT_CALLBACK == TRUE
+ /**
+ * @brief Notification callback when watchdog timedout
+ *
+ * @note About 2 cycles at NRF5_LFCLK_FREQUENCY are available
+ * before automatic reboot.
+ *
+ */
void (*callback)(void);
#endif
} WDGConfig;
diff --git a/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c b/os/hal/ports/NRF5/NRF51822/hal_adc_lld.c index 7f3413c..6c0f2c6 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c +++ b/os/hal/ports/NRF5/NRF51822/hal_adc_lld.c @@ -36,7 +36,7 @@ /*===========================================================================*/
/** @brief ADC1 driver identifier.*/
-#if NRF51_ADC_USE_ADC1 || defined(__DOXYGEN__)
+#if NRF5_ADC_USE_ADC1 || defined(__DOXYGEN__)
ADCDriver ADCD1;
#endif
@@ -68,7 +68,7 @@ static void adc_lld_config_next_channel(ADCDriver *adcp, uint32_t config) { /* Driver interrupt handlers. */
/*===========================================================================*/
-#if NRF51_ADC_USE_ADC1 || defined(__DOXYGEN__)
+#if NRF5_ADC_USE_ADC1 || defined(__DOXYGEN__)
/**
* @brief ADC interrupt handler.
*
@@ -130,7 +130,7 @@ OSAL_IRQ_HANDLER(Vector5C) { */
void adc_lld_init(void) {
-#if NRF51_ADC_USE_ADC1
+#if NRF5_ADC_USE_ADC1
/* Driver initialization.*/
adcObjectInit(&ADCD1);
ADCD1.adc = NRF_ADC;
@@ -148,13 +148,13 @@ void adc_lld_start(ADCDriver *adcp) { /* If in stopped state then configures and enables the ADC. */
if (adcp->state == ADC_STOP) {
-#if NRF51_ADC_USE_ADC1
+#if NRF5_ADC_USE_ADC1
if (&ADCD1 == adcp) {
adcp->adc->INTENSET = ADC_INTENSET_END_Enabled << ADC_INTENSET_END_Pos;
- nvicEnableVector(ADC_IRQn, NRF51_ADC_IRQ_PRIORITY);
+ nvicEnableVector(ADC_IRQn, NRF5_ADC_IRQ_PRIORITY);
}
-#endif /* NRF51_ADC_USE_ADC1 */
+#endif /* NRF5_ADC_USE_ADC1 */
}
}
@@ -170,7 +170,7 @@ void adc_lld_stop(ADCDriver *adcp) { /* If in ready state then disables the ADC clock and analog part.*/
if (adcp->state == ADC_READY) {
-#if NRF51_ADC_USE_ADC1
+#if NRF5_ADC_USE_ADC1
if (&ADCD1 == adcp) {
nvicDisableVector(ADC_IRQn);
diff --git a/os/hal/ports/NRF51/NRF51822/hal_adc_lld.h b/os/hal/ports/NRF5/NRF51822/hal_adc_lld.h index 36854fb..2ee30ac 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_adc_lld.h +++ b/os/hal/ports/NRF5/NRF51822/hal_adc_lld.h @@ -44,15 +44,15 @@ * @details If set to @p TRUE the support for ADC1 is included.
* @note The default is @p FALSE.
*/
-#if !defined(NRF51_ADC_USE_ADC1) || defined(__DOXYGEN__)
-#define NRF51_ADC_USE_ADC1 FALSE
+#if !defined(NRF5_ADC_USE_ADC1) || defined(__DOXYGEN__)
+#define NRF5_ADC_USE_ADC1 FALSE
#endif
/**
* @brief ADC interrupt priority level setting.
*/
-#if !defined(NRF51_ADC_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_ADC_IRQ_PRIORITY 2
+#if !defined(NRF5_ADC_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_ADC_IRQ_PRIORITY 2
#endif
/** @} */
@@ -61,12 +61,12 @@ /* Derived constants and error checks. */
/*===========================================================================*/
-#if !NRF51_ADC_USE_ADC1
+#if !NRF5_ADC_USE_ADC1
#error "ADC driver activated but no ADC peripheral assigned"
#endif
-#if NRF51_ADC_USE_ADC1 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_ADC_IRQ_PRIORITY)
+#if NRF5_ADC_USE_ADC1 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_ADC_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to ADC1"
#endif
@@ -206,7 +206,7 @@ struct ADCDriver { /* External declarations. */
/*===========================================================================*/
-#if NRF51_ADC_USE_ADC1 && !defined(__DOXYGEN__)
+#if NRF5_ADC_USE_ADC1 && !defined(__DOXYGEN__)
extern ADCDriver ADCD1;
#endif
diff --git a/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c b/os/hal/ports/NRF5/NRF51822/hal_ext_lld.c index 47736c7..47736c7 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c +++ b/os/hal/ports/NRF5/NRF51822/hal_ext_lld.c diff --git a/os/hal/ports/NRF51/NRF51822/hal_ext_lld.h b/os/hal/ports/NRF5/NRF51822/hal_ext_lld.h index 37ae721..37ae721 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_ext_lld.h +++ b/os/hal/ports/NRF5/NRF51822/hal_ext_lld.h diff --git a/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c b/os/hal/ports/NRF5/NRF51822/hal_ext_lld_isr.c index 52f07d6..ca8e24d 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c +++ b/os/hal/ports/NRF5/NRF51822/hal_ext_lld_isr.c @@ -92,7 +92,7 @@ OSAL_IRQ_HANDLER(Vector58) { */
void ext_lld_exti_irq_enable(void) {
- nvicEnableVector(GPIOTE_IRQn, NRF51_EXT_GPIOTE_IRQ_PRIORITY);
+ nvicEnableVector(GPIOTE_IRQn, NRF5_EXT_GPIOTE_IRQ_PRIORITY);
}
/**
diff --git a/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.h b/os/hal/ports/NRF5/NRF51822/hal_ext_lld_isr.h index 736e55c..d606866 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.h +++ b/os/hal/ports/NRF5/NRF51822/hal_ext_lld_isr.h @@ -42,8 +42,8 @@ /**
* @brief GPIOTE interrupt priority level setting.
*/
-#if !defined(NRF51_EXT_GPIOTE_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_EXT_GPIOTE_IRQ_PRIORITY 3
+#if !defined(NRF5_EXT_GPIOTE_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_EXT_GPIOTE_IRQ_PRIORITY 3
#endif
/** @} */
diff --git a/os/hal/ports/NRF51/NRF51822/hal_lld.c b/os/hal/ports/NRF5/NRF51822/hal_lld.c index af5e377..f33fdda 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_lld.c +++ b/os/hal/ports/NRF5/NRF51822/hal_lld.c @@ -56,14 +56,16 @@ void hal_lld_init(void) { /* High frequency clock initialisation - * (If NRF51_XTAL_VALUE is not defined assume its an RC oscillator) + * (If NRF5_XTAL_VALUE is not defined assume its an 16Mhz RC oscillator) */ NRF_CLOCK->TASKS_HFCLKSTOP = 1; -#if defined(NRF51_XTAL_VALUE) -#if NRF51_XTAL_VALUE == 16000000 +#if defined(NRF5_XTAL_VALUE) +#if NRF5_XTAL_VALUE == 16000000 NRF_CLOCK->XTALFREQ = 0xFF; -#elif NRF51_XTAL_VALUE == 32000000 +#elif NRF5_XTAL_VALUE == 32000000 NRF_CLOCK->XTALFREQ = 0x00; +#else +#error "Unsupported XTAL value" #endif #endif @@ -72,10 +74,10 @@ void hal_lld_init(void) * Clock is only started if st driver requires it */ NRF_CLOCK->TASKS_LFCLKSTOP = 1; - NRF_CLOCK->LFCLKSRC = NRF51_LFCLK_SOURCE; + NRF_CLOCK->LFCLKSRC = NRF5_LFCLK_SOURCE; #if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) && \ - (NRF51_SYSTEM_TICKS == NRF51_SYSTEM_TICKS_AS_RTC) + (NRF5_SYSTEM_TICKS == NRF5_SYSTEM_TICKS_AS_RTC) NRF_CLOCK->TASKS_LFCLKSTART = 1; #endif } diff --git a/os/hal/ports/NRF51/NRF51822/hal_lld.h b/os/hal/ports/NRF5/NRF51822/hal_lld.h index e404020..a1d2460 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_lld.h +++ b/os/hal/ports/NRF5/NRF51822/hal_lld.h @@ -15,7 +15,7 @@ */ /** - * @file NRF51/NRF51822/hal_lld.h + * @file NRF5/NRF51822/hal_lld.h * @brief NRF51822 HAL subsystem low level driver header. * * @addtogroup HAL @@ -36,13 +36,25 @@ #define PLATFORM_NAME "Nordic Semiconductor nRF51822" /** - * @} + * @name Chip series + */ +#define NRF_SERIES 51 + +/** + * @brief Frequency value for the Low Frequency Clock + */ +#define NRF5_LFCLK_FREQUENCY 32768 + +/** + * @brief Frequency value for the High Frequency Clock */ +#define NRF5_HFCLK_FREQUENCY 16000000 /** - * @brief Frequency valuefor the Low Frequency Clock + * @} */ -#define NRF51_LFCLK_FREQUENCY 32768 + + /*===========================================================================*/ /* Driver pre-compile time settings. */ @@ -57,16 +69,16 @@ * When cristal is not available it's preferable to use the * internal RC oscillator that synthezing the clock. */ -#if !defined(NRF51_LFCLK_SOURCE) || defined(__DOXYGEN__) -#define NRF51_LFCLK_SOURCE 0 +#if !defined(NRF5_LFCLK_SOURCE) || defined(__DOXYGEN__) +#define NRF5_LFCLK_SOURCE 0 #endif /*===========================================================================*/ /* Derived constants and error checks. */ /*===========================================================================*/ -#if (NRF51_LFCLK_SOURCE < 0) || (NRF51_LFCLK_SOURCE > 2) -#error "Possible value for NRF51_LFCLK_SOURCE are 0=RC, 1=XTAL, 2=Synth" +#if (NRF5_LFCLK_SOURCE < 0) || (NRF5_LFCLK_SOURCE > 2) +#error "Possible value for NRF5_LFCLK_SOURCE are 0=RC, 1=XTAL, 2=Synth" #endif /*===========================================================================*/ @@ -83,14 +95,11 @@ #include "nvic.h" -#define NRF51_LFCLK_FREQUENCY 32768 -#define NRF51_HFCLK_FREQUENCY 16000000 #ifdef __cplusplus extern "C" { #endif void hal_lld_init(void); - void nrf51_clock_init(void); #ifdef __cplusplus } #endif diff --git a/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c b/os/hal/ports/NRF5/NRF51822/hal_pwm_lld.c index 456dcff..e2b4b6b 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c +++ b/os/hal/ports/NRF5/NRF51822/hal_pwm_lld.c @@ -18,6 +18,11 @@ * @file hal_pwm_lld.c
* @brief NRF51 PWM subsystem low level driver source.
*
+ * @note Using the method described in nrf51-pwm-library to correctly
+ * handle toggling of the pin with GPIOTE when changing period.
+ * It means it is generally unsafe to use GPIOTE with a period
+ * less than (2 * PWM_GPIOTE_DECISION_TIME / 16MHz)
+ *
* @addtogroup PWM
* @{
*/
@@ -30,6 +35,8 @@ /* Driver local definitions. */
/*===========================================================================*/
+#define PWM_GPIOTE_PPI_CC 3
+#define PWM_GPIOTE_DECISION_TIME 160
/*===========================================================================*/
/* Driver exported variables. */
@@ -39,7 +46,7 @@ * @brief PWMD1 driver identifier.
* @note The driver PWMD1 allocates the timer TIMER0 when enabled.
*/
-#if NRF51_PWM_USE_TIMER0 || defined(__DOXYGEN__)
+#if NRF5_PWM_USE_TIMER0 || defined(__DOXYGEN__)
PWMDriver PWMD1;
#endif
@@ -47,7 +54,7 @@ PWMDriver PWMD1; * @brief PWMD2 driver identifier.
* @note The driver PWMD2 allocates the timer TIMER1 when enabled.
*/
-#if NRF51_PWM_USE_TIMER1 || defined(__DOXYGEN__)
+#if NRF5_PWM_USE_TIMER1 || defined(__DOXYGEN__)
PWMDriver PWMD2;
#endif
@@ -55,7 +62,7 @@ PWMDriver PWMD2; * @brief PWMD3 driver identifier.
* @note The driver PWMD3 allocates the timer TIMER2 when enabled.
*/
-#if NRF51_PWM_USE_TIMER2 || defined(__DOXYGEN__)
+#if NRF5_PWM_USE_TIMER2 || defined(__DOXYGEN__)
PWMDriver PWMD3;
#endif
@@ -63,24 +70,39 @@ PWMDriver PWMD3; /* Driver local variables and types. */
/*===========================================================================*/
+static const uint8_t pwm_margin_by_prescaler[] = {
+ (PWM_GPIOTE_DECISION_TIME + 0) >> 0,
+ (PWM_GPIOTE_DECISION_TIME + 1) >> 1,
+ (PWM_GPIOTE_DECISION_TIME + 3) >> 2,
+ (PWM_GPIOTE_DECISION_TIME + 7) >> 3,
+ (PWM_GPIOTE_DECISION_TIME + 15) >> 4,
+ (PWM_GPIOTE_DECISION_TIME + 31) >> 5,
+ (PWM_GPIOTE_DECISION_TIME + 63) >> 6,
+ (PWM_GPIOTE_DECISION_TIME + 127) >> 7,
+ (PWM_GPIOTE_DECISION_TIME + 255) >> 8,
+ (PWM_GPIOTE_DECISION_TIME + 511) >> 9
+};
+
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
static void pwm_lld_serve_interrupt(PWMDriver *pwmp) {
- // Deal with PWM channels
- uint8_t n;
- for (n = 0 ; n < pwmp->channels ; n++) {
- if (pwmp->timer->EVENTS_COMPARE[n]) {
- pwmp->timer->EVENTS_COMPARE[n] = 0;
-
- if (pwmp->config->channels[n].callback != NULL) {
- pwmp->config->channels[n].callback(pwmp);
+ uint8_t channel;
+ /* Deal with PWM channels
+ */
+ for (channel = 0 ; channel < pwmp->channels ; channel++) {
+ if (pwmp->timer->EVENTS_COMPARE[channel]) {
+ pwmp->timer->EVENTS_COMPARE[channel] = 0;
+
+ if (pwmp->config->channels[channel].callback != NULL) {
+ pwmp->config->channels[channel].callback(pwmp);
}
}
}
- // Deal with PWM period
+ /* Deal with PWM period
+ */
if (pwmp->timer->EVENTS_COMPARE[pwmp->channels]) {
pwmp->timer->EVENTS_COMPARE[pwmp->channels] = 0;
@@ -88,14 +110,21 @@ static void pwm_lld_serve_interrupt(PWMDriver *pwmp) { pwmp->config->callback(pwmp);
}
}
+}
+static inline
+bool pwm_within_safe_margins(PWMDriver *pwmp, uint32_t timer, uint32_t width) {
+ const uint32_t margin = pwm_margin_by_prescaler[pwmp->timer->PRESCALER];
+ return (width <= margin)
+ ? ((width <= timer) && (timer < (pwmp->period + width - margin)))
+ : ((width <= timer) || (timer < (width - margin)));
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
-#if NRF51_PWM_USE_TIMER0
+#if NRF5_PWM_USE_TIMER0
/**
* @brief TIMER0 interrupt handler.
*
@@ -106,9 +135,9 @@ OSAL_IRQ_HANDLER(Vector60) { pwm_lld_serve_interrupt(&PWMD1);
OSAL_IRQ_EPILOGUE();
}
-#endif /* NRF51_PWM_USE_TIMER0 */
+#endif /* NRF5_PWM_USE_TIMER0 */
-#if NRF51_PWM_USE_TIMER1
+#if NRF5_PWM_USE_TIMER1
/**
* @brief TIMER1 interrupt handler.
*
@@ -119,9 +148,9 @@ OSAL_IRQ_HANDLER(Vector64) { pwm_lld_serve_interrupt(&PWMD2);
OSAL_IRQ_EPILOGUE();
}
-#endif /* NRF51_PWM_USE_TIMER1 */
+#endif /* NRF5_PWM_USE_TIMER1 */
-#if NRF51_PWM_USE_TIMER2
+#if NRF5_PWM_USE_TIMER2
/**
* @brief TIMER2 interrupt handler.
*
@@ -132,7 +161,7 @@ OSAL_IRQ_HANDLER(Vector68) { pwm_lld_serve_interrupt(&PWMD3);
OSAL_IRQ_EPILOGUE();
}
-#endif /* NRF51_PWM_USE_TIMER2 */
+#endif /* NRF5_PWM_USE_TIMER2 */
/*===========================================================================*/
/* Driver exported functions. */
@@ -145,19 +174,19 @@ OSAL_IRQ_HANDLER(Vector68) { */
void pwm_lld_init(void) {
-#if NRF51_PWM_USE_TIMER0
+#if NRF5_PWM_USE_TIMER0
pwmObjectInit(&PWMD1);
PWMD1.channels = PWM_CHANNELS;
PWMD1.timer = NRF_TIMER0;
#endif
-#if NRF51_PWM_USE_TIMER1
+#if NRF5_PWM_USE_TIMER1
pwmObjectInit(&PWMD2);
PWMD2.channels = PWM_CHANNELS;
PWMD2.timer = NRF_TIMER1;
#endif
-#if NRF51_PWM_USE_TIMER2
+#if NRF5_PWM_USE_TIMER2
pwmObjectInit(&PWMD3);
PWMD3.channels = PWM_CHANNELS;
PWMD3.timer = NRF_TIMER2;
@@ -174,66 +203,64 @@ void pwm_lld_init(void) { * @notapi
*/
void pwm_lld_start(PWMDriver *pwmp) {
- // Prescaler value calculation: ftimer = 16MHz / 2^PRESCALER
- uint16_t psc_ratio = NRF51_HFCLK_FREQUENCY / pwmp->config->frequency;
- // Prescaler ratio must be between 1 and 512, and a power of two.
+ /* Prescaler value calculation: ftimer = 16MHz / 2^PRESCALER */
+ uint16_t psc_ratio = NRF5_HFCLK_FREQUENCY / pwmp->config->frequency;
+ /* Prescaler ratio must be between 1 and 512, and a power of two. */
osalDbgAssert(psc_ratio <= 512 && !(psc_ratio & (psc_ratio - 1)),
- "invalid frequency");
- // Prescaler value as a power of 2, must be 0..9
+ "invalid frequency");
+ /* Prescaler value as a power of 2, must be 0..9 */
uint32_t psc_value;
for (psc_value = 0; psc_value < 10; psc_value++)
- if (psc_ratio == (unsigned)(1 << psc_value))
- break;
+ if (psc_ratio == (unsigned)(1 << psc_value))
+ break;
-
- // Configure as 16bits timer (only TIMER0 support 32bits)
+ /* Configure as 16bits timer (only TIMER0 support 32bits) */
pwmp->timer->BITMODE = TIMER_BITMODE_BITMODE_16Bit;
pwmp->timer->MODE = TIMER_MODE_MODE_Timer;
- // With clear shortcuts for period
+ /* With clear shortcuts for period */
pwmp->timer->SHORTS =
- 0x1UL << (TIMER_SHORTS_COMPARE0_CLEAR_Pos + pwmp->channels);
+ 0x1UL << (TIMER_SHORTS_COMPARE0_CLEAR_Pos + pwmp->channels);
- // Disable and reset interrupts for compare events
+ /* Disable and reset interrupts for compare events */
pwmp->timer->INTENCLR = (TIMER_INTENCLR_COMPARE0_Msk |
- TIMER_INTENCLR_COMPARE1_Msk |
- TIMER_INTENCLR_COMPARE2_Msk |
- TIMER_INTENCLR_COMPARE3_Msk );
+ TIMER_INTENCLR_COMPARE1_Msk |
+ TIMER_INTENCLR_COMPARE2_Msk |
+ TIMER_INTENCLR_COMPARE3_Msk );
pwmp->timer->EVENTS_COMPARE[0] = 0;
pwmp->timer->EVENTS_COMPARE[1] = 0;
pwmp->timer->EVENTS_COMPARE[2] = 0;
pwmp->timer->EVENTS_COMPARE[3] = 0;
- // Set prescaler
+ /* Set prescaler */
pwmp->timer->PRESCALER = psc_value;
- // Set period
+ /* Set period */
pwmp->timer->CC[pwmp->channels] = pwmp->period;
- // Clear everything
+ /* Clear everything */
pwmp->timer->TASKS_CLEAR = 1;
-
- // Enable interrupt
-#if NRF51_PWM_USE_TIMER0
+ /* Enable interrupt */
+#if NRF5_PWM_USE_TIMER0
if (&PWMD1 == pwmp) {
- nvicEnableVector(TIMER0_IRQn, NRF51_PWM_TIMER0_PRIORITY);
+ nvicEnableVector(TIMER0_IRQn, NRF5_PWM_TIMER0_PRIORITY);
}
#endif
-#if NRF51_PWM_USE_TIMER1
+#if NRF5_PWM_USE_TIMER1
if (&PWMD2 == pwmp) {
- nvicEnableVector(TIMER1_IRQn, NRF51_PWM_TIMER1_PRIORITY);
+ nvicEnableVector(TIMER1_IRQn, NRF5_PWM_TIMER1_PRIORITY);
}
#endif
-#if NRF51_PWM_USE_TIMER2
+#if NRF5_PWM_USE_TIMER2
if (&PWMD3 == pwmp) {
- nvicEnableVector(TIMER2_IRQn, NRF51_PWM_TIMER2_PRIORITY);
+ nvicEnableVector(TIMER2_IRQn, NRF5_PWM_TIMER2_PRIORITY);
}
#endif
- // Start timer
+ /* Start timer */
pwmp->timer->TASKS_START = 1;
}
@@ -245,21 +272,21 @@ void pwm_lld_start(PWMDriver *pwmp) { * @notapi
*/
void pwm_lld_stop(PWMDriver *pwmp) {
- pwmp->timer->TASKS_STOP = 1;
+ pwmp->timer->TASKS_SHUTDOWN = 1;
-#if NRF51_PWM_USE_TIMER0
+#if NRF5_PWM_USE_TIMER0
if (&PWMD1 == pwmp) {
nvicDisableVector(TIMER0_IRQn);
}
#endif
-#if NRF51_PWM_USE_TIMER1
+#if NRF5_PWM_USE_TIMER1
if (&PWMD2 == pwmp) {
nvicDisableVector(TIMER1_IRQn);
}
#endif
-#if NRF51_PWM_USE_TIMER2
+#if NRF5_PWM_USE_TIMER2
if (&PWMD3 == pwmp) {
nvicDisableVector(TIMER2_IRQn);
}
@@ -282,43 +309,83 @@ void pwm_lld_stop(PWMDriver *pwmp) { void pwm_lld_enable_channel(PWMDriver *pwmp,
pwmchannel_t channel,
pwmcnt_t width) {
-#if NRF51_PWM_USE_GPIOTE_PPI
+#if NRF5_PWM_USE_GPIOTE_PPI
const PWMChannelConfig *cfg_channel = &pwmp->config->channels[channel];
-
+ const uint8_t gpiote_channel = cfg_channel->gpiote_channel;
+ const uint8_t *ppi_channel = cfg_channel->ppi_channel;
+
uint32_t outinit;
switch(cfg_channel->mode & PWM_OUTPUT_MASK) {
- case PWM_OUTPUT_ACTIVE_LOW:
- outinit = GPIOTE_CONFIG_OUTINIT_Low;
- break;
- case PWM_OUTPUT_ACTIVE_HIGH:
- outinit = GPIOTE_CONFIG_OUTINIT_High;
- break;
- case PWM_OUTPUT_DISABLED:
- default:
- goto no_output_config;
+ case PWM_OUTPUT_ACTIVE_LOW : outinit = GPIOTE_CONFIG_OUTINIT_Low; break;
+ case PWM_OUTPUT_ACTIVE_HIGH: outinit = GPIOTE_CONFIG_OUTINIT_High; break;
+ case PWM_OUTPUT_DISABLED : /* fall-through */
+ default : goto no_output_config;
}
- const uint32_t gpio_pin = PAL_PAD(cfg_channel->ioline);
- const uint8_t gpiote_channel = cfg_channel->gpiote_channel;
- const uint8_t *ppi_channel = cfg_channel->ppi_channel;
- const uint32_t polarity = GPIOTE_CONFIG_POLARITY_Toggle;
-
- // Create GPIO Task
- NRF_GPIOTE->CONFIG[gpiote_channel] = GPIOTE_CONFIG_MODE_Task |
- ((gpio_pin << GPIOTE_CONFIG_PSEL_Pos ) & GPIOTE_CONFIG_PSEL_Msk) |
- ((polarity << GPIOTE_CONFIG_POLARITY_Pos) & GPIOTE_CONFIG_POLARITY_Msk) |
- ((outinit << GPIOTE_CONFIG_OUTINIT_Pos ) & GPIOTE_CONFIG_OUTINIT_Msk);
-
- // Program tasks (one for duty cycle, one for periode)
- NRF_PPI->CH[ppi_channel[0]].EEP =
+ /* Deal with corner case: 0% and 100% */
+ if ((width <= 0) || (width >= pwmp->period)) {
+ /* Disable GPIOTE/PPI task */
+ NRF_GPIOTE->CONFIG[gpiote_channel] = GPIOTE_CONFIG_MODE_Disabled;
+ NRF_PPI->CHENCLR = ((1 << ppi_channel[0]) | (1 << ppi_channel[1]));
+ /* Set Line */
+ palWriteLine(cfg_channel->ioline,
+ ((width <= 0) ^
+ ((cfg_channel->mode & PWM_OUTPUT_MASK) == PWM_OUTPUT_ACTIVE_HIGH)));
+
+ /* Really doing PWM */
+ } else {
+ const uint32_t gpio_pin = PAL_PAD(cfg_channel->ioline);
+ const uint32_t polarity = GPIOTE_CONFIG_POLARITY_Toggle;
+
+ /* Program tasks (one for duty cycle, one for periode) */
+ NRF_PPI->CH[ppi_channel[0]].EEP =
(uint32_t)&pwmp->timer->EVENTS_COMPARE[channel];
- NRF_PPI->CH[ppi_channel[0]].TEP =
+ NRF_PPI->CH[ppi_channel[0]].TEP =
(uint32_t)&NRF_GPIOTE->TASKS_OUT[gpiote_channel];
- NRF_PPI->CH[ppi_channel[1]].EEP =
+ NRF_PPI->CH[ppi_channel[1]].EEP =
(uint32_t)&pwmp->timer->EVENTS_COMPARE[pwmp->channels];
- NRF_PPI->CH[ppi_channel[1]].TEP =
+ NRF_PPI->CH[ppi_channel[1]].TEP =
(uint32_t)&NRF_GPIOTE->TASKS_OUT[gpiote_channel];
- NRF_PPI->CHENSET = ((1 << ppi_channel[0]) | (1 << ppi_channel[1]));
+ NRF_PPI->CHENSET = ((1 << ppi_channel[0]) | (1 << ppi_channel[1]));
+
+ /* Something Old, something New */
+ const uint32_t old_width = pwmp->timer->CC[channel];
+ const uint32_t new_width = width;
+
+ /* Check GPIOTE state */
+ const bool gpiote = (NRF_GPIOTE->CONFIG[gpiote_channel] &
+ GPIOTE_CONFIG_MODE_Msk) != GPIOTE_CONFIG_MODE_Disabled;
+
+ /* GPIOTE is currently running */
+ if (gpiote) {
+ uint32_t current;
+ while (true) {
+ pwmp->timer->TASKS_CAPTURE[PWM_GPIOTE_PPI_CC] = 1;
+ current = pwmp->timer->CC[PWM_GPIOTE_PPI_CC];
+
+ if (pwm_within_safe_margins(pwmp, current, old_width) &&
+ pwm_within_safe_margins(pwmp, current, new_width))
+ break;
+ }
+ if (((old_width <= current) && (current < new_width)) ||
+ ((new_width <= current) && (current < old_width))) {
+ NRF_GPIOTE->TASKS_OUT[gpiote_channel] = 1;
+ }
+
+ /* GPIOTE need to be restarted */
+ } else {
+ /* Create GPIO Task */
+ NRF_GPIOTE->CONFIG[gpiote_channel] =
+ (GPIOTE_CONFIG_MODE_Task << GPIOTE_CONFIG_MODE_Pos) |
+ ((gpio_pin << GPIOTE_CONFIG_PSEL_Pos ) & GPIOTE_CONFIG_PSEL_Msk )|
+ ((polarity << GPIOTE_CONFIG_POLARITY_Pos) & GPIOTE_CONFIG_POLARITY_Msk)|
+ ((outinit << GPIOTE_CONFIG_OUTINIT_Pos ) & GPIOTE_CONFIG_OUTINIT_Msk );
+
+ pwmp->timer->TASKS_CAPTURE[PWM_GPIOTE_PPI_CC] = 1;
+ if (pwmp->timer->CC[PWM_GPIOTE_PPI_CC] > width)
+ NRF_GPIOTE->TASKS_OUT[gpiote_channel] = 1;
+ }
+ }
no_output_config:
#endif
@@ -340,7 +407,7 @@ void pwm_lld_enable_channel(PWMDriver *pwmp, */
void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) {
pwmp->timer->CC[channel] = 0;
-#if NRF51_PWM_USE_GPIOTE_PPI
+#if NRF5_PWM_USE_GPIOTE_PPI
const PWMChannelConfig *cfg_channel = &pwmp->config->channels[channel];
switch(cfg_channel->mode & PWM_OUTPUT_MASK) {
case PWM_OUTPUT_ACTIVE_LOW:
@@ -369,7 +436,7 @@ void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) { */
void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) {
pwmp->timer->INTENSET =
- 0x1UL << (TIMER_INTENSET_COMPARE0_Pos + pwmp->channels);
+ 0x1UL << (TIMER_INTENSET_COMPARE0_Pos + pwmp->channels);
}
/**
@@ -383,7 +450,7 @@ void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) { */
void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) {
pwmp->timer->INTENCLR =
- 0x1UL << (TIMER_INTENCLR_COMPARE0_Pos + pwmp->channels);
+ 0x1UL << (TIMER_INTENCLR_COMPARE0_Pos + pwmp->channels);
}
/**
@@ -400,7 +467,7 @@ void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) { void pwm_lld_enable_channel_notification(PWMDriver *pwmp,
pwmchannel_t channel) {
pwmp->timer->INTENSET =
- 0x1UL << (TIMER_INTENSET_COMPARE0_Pos + channel);
+ 0x1UL << (TIMER_INTENSET_COMPARE0_Pos + channel);
}
/**
@@ -409,15 +476,15 @@ void pwm_lld_enable_channel_notification(PWMDriver *pwmp, * @pre The channel must have been activated using @p pwmEnableChannel().
* @note If the notification is already disabled then the call has no effect.
*
- * @param[in] pwmp pointer to a @p PWMDriver object
- * @param[in] channel PWM channel identifier (0...channels-1)
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...channels-1)
*
* @notapi
*/
void pwm_lld_disable_channel_notification(PWMDriver *pwmp,
- pwmchannel_t channel) {
+ pwmchannel_t channel) {
pwmp->timer->INTENCLR =
- 0x1UL << (TIMER_INTENCLR_COMPARE0_Pos + channel);
+ 0x1UL << (TIMER_INTENCLR_COMPARE0_Pos + channel);
}
#endif /* HAL_USE_PWM */
diff --git a/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.h b/os/hal/ports/NRF5/NRF51822/hal_pwm_lld.h index e2982d8..2cad6e7 100644 --- a/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.h +++ b/os/hal/ports/NRF5/NRF51822/hal_pwm_lld.h @@ -34,8 +34,11 @@ /**
* @brief Number of PWM channels per PWM driver.
*/
+#if NRF5_PWM_USE_GPIOTE_PPI
+#define PWM_CHANNELS 2
+#else
#define PWM_CHANNELS 3
-
+#endif
#define PWM_FREQUENCY_16MHZ 16000000 /** @brief 16MHz */
#define PWM_FREQUENCY_8MHZ 8000000 /** @brief 8MHz */
@@ -60,50 +63,50 @@ /**
* @brief TIMER0 as driver implementation
*/
-#if !defined(NRF51_PWM_USE_TIMER0)
-#define NRF51_PWM_USE_TIMER0 FALSE
+#if !defined(NRF5_PWM_USE_TIMER0)
+#define NRF5_PWM_USE_TIMER0 FALSE
#endif
/**
* @brief TIMER1 as driver implementation
*/
-#if !defined(NRF51_PWM_USE_TIMER1)
-#define NRF51_PWM_USE_TIMER1 FALSE
+#if !defined(NRF5_PWM_USE_TIMER1)
+#define NRF5_PWM_USE_TIMER1 FALSE
#endif
/**
* @brief TIMER2 as driver implementation
*/
-#if !defined(NRF51_PWM_USE_TIMER2)
-#define NRF51_PWM_USE_TIMER2 FALSE
+#if !defined(NRF5_PWM_USE_TIMER2)
+#define NRF5_PWM_USE_TIMER2 FALSE
#endif
/**
* @brief TIMER0 interrupt priority level setting.
*/
-#if !defined(NRF51_PWM_TIMER0_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_PWM_TIMER0_PRIORITY 3
+#if !defined(NRF5_PWM_TIMER0_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_PWM_TIMER0_PRIORITY 3
#endif
/**
* @brief TIMER1 interrupt priority level setting.
*/
-#if !defined(NRF51_PWM_TIMER1_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_PWM_TIMER1_PRIORITY 3
+#if !defined(NRF5_PWM_TIMER1_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_PWM_TIMER1_PRIORITY 3
#endif
/**
* @brief TIMER2 interrupt priority level setting.
*/
-#if !defined(NRF51_PWM_TIMER2_PRIORITY) || defined(__DOXYGEN__)
-#define NRF51_PWM_TIMER2_PRIORITY 3
+#if !defined(NRF5_PWM_TIMER2_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_PWM_TIMER2_PRIORITY 3
#endif
/**
* @brief Allow driver to use GPIOTE/PPI to control PAL line
*/
-#if !defined(NRF51_PWM_USE_GPIOTE_PPI)
-#define NRF51_PWM_USE_GPIOTE_PPI FALSE
+#if !defined(NRF5_PWM_USE_GPIOTE_PPI)
+#define NRF5_PWM_USE_GPIOTE_PPI TRUE
#endif
/** @} */
@@ -112,26 +115,26 @@ /* Configuration checks. */
/*===========================================================================*/
-#if !NRF51_PWM_USE_TIMER0 && !NRF51_PWM_USE_TIMER1 && !NRF51_PWM_USE_TIMER2
+#if !NRF5_PWM_USE_TIMER0 && !NRF5_PWM_USE_TIMER1 && !NRF5_PWM_USE_TIMER2
#error "PWM driver activated but no TIMER peripheral assigned"
#endif
-#if (NRF51_ST_USE_TIMER0 == TRUE) && (NRF51_PWM_USE_TIMER0 == TRUE)
+#if (NRF5_ST_USE_TIMER0 == TRUE) && (NRF5_PWM_USE_TIMER0 == TRUE)
#error "TIMER0 used for ST and PWM"
#endif
-#if NRF51_PWM_USE_TIMER0 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_PWM_TIMER0_PRIORITY)
+#if NRF5_PWM_USE_TIMER0 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_PWM_TIMER0_PRIORITY)
#error "Invalid IRQ priority assigned to TIMER0"
#endif
-#if NRF51_PWM_USE_TIMER1 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_PWM_TIMER1_PRIORITY)
+#if NRF5_PWM_USE_TIMER1 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_PWM_TIMER1_PRIORITY)
#error "Invalid IRQ priority assigned to TIMER1"
#endif
-#if NRF51_PWM_USE_TIMER2 && \
- !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_PWM_TIMER2_PRIORITY)
+#if NRF5_PWM_USE_TIMER2 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_PWM_TIMER2_PRIORITY)
#error "Invalid IRQ priority assigned to TIMER2"
#endif
@@ -177,26 +180,24 @@ typedef struct { pwmcallback_t callback;
/* End of the mandatory fields.*/
+#if NRF5_PWM_USE_GPIOTE_PPI || defined(__DOXYGEN__)
/**
* @brief PAL line to toggle.
* @note Only used if mode is PWM_OUTPUT_HIGH or PWM_OUTPUT_LOW.
- * @note When NRF51_PWM_USE_GPIOTE_PPI is used and channel enabled,
+ * @note When NRF5_PWM_USE_GPIOTE_PPI is used and channel enabled,
* it wont be possible to access this PAL line using the PAL
* driver.
*/
ioline_t ioline;
-#if NRF51_PWM_USE_GPIOTE_PPI || defined(__DOXYGEN__)
/**
* @brief Unique GPIOTE channel to use. (1 channel)
- * @note Only used if mode is PWM_OUTPUT_HIGH or PWM_OUTPUT_LOW.
* @note Only 4 GPIOTE channels are available on nRF51.
*/
uint8_t gpiote_channel;
/**
* @brief Unique PPI channels to use. (2 channels)
- * @note Only used if mode is PWM_OUTPUT_HIGH or PWM_OUTPUT_LOW.
* @note Only 16 PPI channels are available on nRF51
* (When Softdevice is enabled, only channels 0-7 are available)
*/
@@ -296,13 +297,13 @@ struct PWMDriver { /* External declarations. */
/*===========================================================================*/
-#if NRF51_PWM_USE_TIMER0 || defined(__DOXYGEN__)
+#if NRF5_PWM_USE_TIMER0 || defined(__DOXYGEN__)
extern PWMDriver PWMD1;
#endif
-#if NRF51_PWM_USE_TIMER1 || defined(__DOXYGEN__)
+#if NRF5_PWM_USE_TIMER1 || defined(__DOXYGEN__)
extern PWMDriver PWMD2;
#endif
-#if NRF51_PWM_USE_TIMER2 || defined(__DOXYGEN__)
+#if NRF5_PWM_USE_TIMER2 || defined(__DOXYGEN__)
extern PWMDriver PWMD3;
#endif
diff --git a/os/hal/ports/NRF51/NRF51822/nrf51.h b/os/hal/ports/NRF5/NRF51822/nrf51.h index 1ed33d6..0b63f7c 100644 --- a/os/hal/ports/NRF51/NRF51822/nrf51.h +++ b/os/hal/ports/NRF5/NRF51822/nrf51.h @@ -6,28 +6,28 @@ * nrf51 from Nordic Semiconductor.
*
* @version V522
- * @date 26. January 2015
+ * @date 23. February 2016
*
* @note Generated with SVDConv V2.81d
- * from CMSIS SVD File 'nrf51.xml' Version 522,
+ * from CMSIS SVD File 'nrf51.svd' Version 522,
*
* @par Copyright (c) 2013, Nordic Semiconductor ASA
* All rights reserved.
- *
+ *
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
- *
+ *
* * Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
- *
+ *
* * Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
- *
+ *
* * Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
- *
+ *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
@@ -38,7 +38,7 @@ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
+ *
*
*******************************************************************************************************/
@@ -294,27 +294,6 @@ typedef struct { /*!< MPU Structure /* ================================================================================ */
-/* ================ PU ================ */
-/* ================================================================================ */
-
-
-/**
- * @brief Patch unit. (PU)
- */
-
-typedef struct { /*!< PU Structure */
- __I uint32_t RESERVED0[448];
- __IO uint32_t REPLACEADDR[8]; /*!< Address of first instruction to replace. */
- __I uint32_t RESERVED1[24];
- __IO uint32_t PATCHADDR[8]; /*!< Relative address of patch instructions. */
- __I uint32_t RESERVED2[24];
- __IO uint32_t PATCHEN; /*!< Patch enable register. */
- __IO uint32_t PATCHENSET; /*!< Patch enable register. */
- __IO uint32_t PATCHENCLR; /*!< Patch disable register. */
-} NRF_PU_Type;
-
-
-/* ================================================================================ */
/* ================ AMLI ================ */
/* ================================================================================ */
@@ -367,11 +346,11 @@ typedef struct { /*!< RADIO Structure __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
__I uint32_t RESERVED4[61];
__I uint32_t CRCSTATUS; /*!< CRC status of received packet. */
- __I uint32_t CD; /*!< Carrier detect. */
+ __I uint32_t RESERVED5;
__I uint32_t RXMATCH; /*!< Received address. */
__I uint32_t RXCRC; /*!< Received CRC. */
__I uint32_t DAI; /*!< Device address match index. */
- __I uint32_t RESERVED5[60];
+ __I uint32_t RESERVED6[60];
__IO uint32_t PACKETPTR; /*!< Packet pointer. Decision point: START task. */
__IO uint32_t FREQUENCY; /*!< Frequency. */
__IO uint32_t TXPOWER; /*!< Output power. */
@@ -390,22 +369,22 @@ typedef struct { /*!< RADIO Structure __IO uint32_t TEST; /*!< Test features enable register. */
__IO uint32_t TIFS; /*!< Inter Frame Spacing in microseconds. */
__I uint32_t RSSISAMPLE; /*!< RSSI sample. */
- __I uint32_t RESERVED6;
+ __I uint32_t RESERVED7;
__I uint32_t STATE; /*!< Current radio state. */
__IO uint32_t DATAWHITEIV; /*!< Data whitening initial value. */
- __I uint32_t RESERVED7[2];
+ __I uint32_t RESERVED8[2];
__IO uint32_t BCC; /*!< Bit counter compare. */
- __I uint32_t RESERVED8[39];
+ __I uint32_t RESERVED9[39];
__IO uint32_t DAB[8]; /*!< Device address base segment. */
__IO uint32_t DAP[8]; /*!< Device address prefix. */
__IO uint32_t DACNF; /*!< Device address match configuration. */
- __I uint32_t RESERVED9[56];
+ __I uint32_t RESERVED10[56];
__IO uint32_t OVERRIDE0; /*!< Trim value override register 0. */
__IO uint32_t OVERRIDE1; /*!< Trim value override register 1. */
__IO uint32_t OVERRIDE2; /*!< Trim value override register 2. */
__IO uint32_t OVERRIDE3; /*!< Trim value override register 3. */
__IO uint32_t OVERRIDE4; /*!< Trim value override register 4. */
- __I uint32_t RESERVED10[561];
+ __I uint32_t RESERVED11[561];
__IO uint32_t POWER; /*!< Peripheral power control. */
} NRF_RADIO_Type;
@@ -564,39 +543,41 @@ typedef struct { /*!< SPIS Structure __O uint32_t TASKS_RELEASE; /*!< Release SPI semaphore. */
__I uint32_t RESERVED1[54];
__IO uint32_t EVENTS_END; /*!< Granted transaction completed. */
- __I uint32_t RESERVED2[8];
+ __I uint32_t RESERVED2[2];
+ __IO uint32_t EVENTS_ENDRX; /*!< End of RXD buffer reached */
+ __I uint32_t RESERVED3[5];
__IO uint32_t EVENTS_ACQUIRED; /*!< Semaphore acquired. */
- __I uint32_t RESERVED3[53];
+ __I uint32_t RESERVED4[53];
__IO uint32_t SHORTS; /*!< Shortcuts for SPIS. */
- __I uint32_t RESERVED4[64];
+ __I uint32_t RESERVED5[64];
__IO uint32_t INTENSET; /*!< Interrupt enable set register. */
__IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED5[61];
+ __I uint32_t RESERVED6[61];
__I uint32_t SEMSTAT; /*!< Semaphore status. */
- __I uint32_t RESERVED6[15];
+ __I uint32_t RESERVED7[15];
__IO uint32_t STATUS; /*!< Status from last transaction. */
- __I uint32_t RESERVED7[47];
+ __I uint32_t RESERVED8[47];
__IO uint32_t ENABLE; /*!< Enable SPIS. */
- __I uint32_t RESERVED8;
+ __I uint32_t RESERVED9;
__IO uint32_t PSELSCK; /*!< Pin select for SCK. */
__IO uint32_t PSELMISO; /*!< Pin select for MISO. */
__IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */
__IO uint32_t PSELCSN; /*!< Pin select for CSN. */
- __I uint32_t RESERVED9[7];
+ __I uint32_t RESERVED10[7];
__IO uint32_t RXDPTR; /*!< RX data pointer. */
__IO uint32_t MAXRX; /*!< Maximum number of bytes in the receive buffer. */
__I uint32_t AMOUNTRX; /*!< Number of bytes received in last granted transaction. */
- __I uint32_t RESERVED10;
+ __I uint32_t RESERVED11;
__IO uint32_t TXDPTR; /*!< TX data pointer. */
__IO uint32_t MAXTX; /*!< Maximum number of bytes in the transmit buffer. */
__I uint32_t AMOUNTTX; /*!< Number of bytes transmitted in last granted transaction. */
- __I uint32_t RESERVED11;
- __IO uint32_t CONFIG; /*!< Configuration register. */
__I uint32_t RESERVED12;
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED13;
__IO uint32_t DEF; /*!< Default character. */
- __I uint32_t RESERVED13[24];
+ __I uint32_t RESERVED14[24];
__IO uint32_t ORC; /*!< Over-read character. */
- __I uint32_t RESERVED14[654];
+ __I uint32_t RESERVED15[654];
__IO uint32_t POWER; /*!< Peripheral power control. */
} NRF_SPIS_Type;
@@ -621,32 +602,28 @@ typedef struct { /*!< SPIM Structure __IO uint32_t EVENTS_STOPPED; /*!< SPI transaction has stopped. */
__I uint32_t RESERVED3[2];
__IO uint32_t EVENTS_ENDRX; /*!< End of RXD buffer reached. */
- __I uint32_t RESERVED4;
- __IO uint32_t EVENTS_END; /*!< End of RXD buffer and TXD buffer reached. */
- __I uint32_t RESERVED5;
+ __I uint32_t RESERVED4[3];
__IO uint32_t EVENTS_ENDTX; /*!< End of TXD buffer reached. */
- __I uint32_t RESERVED6[10];
+ __I uint32_t RESERVED5[10];
__IO uint32_t EVENTS_STARTED; /*!< Transaction started. */
- __I uint32_t RESERVED7[44];
- __IO uint32_t SHORTS; /*!< Shortcuts for SPIM. */
- __I uint32_t RESERVED8[64];
+ __I uint32_t RESERVED6[109];
__IO uint32_t INTENSET; /*!< Interrupt enable set register. */
__IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
- __I uint32_t RESERVED9[125];
+ __I uint32_t RESERVED7[125];
__IO uint32_t ENABLE; /*!< Enable SPIM. */
- __I uint32_t RESERVED10;
+ __I uint32_t RESERVED8;
SPIM_PSEL_Type PSEL; /*!< Pin select configuration. */
- __I uint32_t RESERVED11[4];
+ __I uint32_t RESERVED9[4];
__IO uint32_t FREQUENCY; /*!< SPI frequency. */
- __I uint32_t RESERVED12[3];
+ __I uint32_t RESERVED10[3];
SPIM_RXD_Type RXD; /*!< RXD EasyDMA configuration and status. */
- __I uint32_t RESERVED13;
+ __I uint32_t RESERVED11;
SPIM_TXD_Type TXD; /*!< TXD EasyDMA configuration and status. */
- __I uint32_t RESERVED14;
+ __I uint32_t RESERVED12;
__IO uint32_t CONFIG; /*!< Configuration register. */
- __I uint32_t RESERVED15[26];
+ __I uint32_t RESERVED13[26];
__IO uint32_t ORC; /*!< Over-read character. */
- __I uint32_t RESERVED16[654];
+ __I uint32_t RESERVED14[654];
__IO uint32_t POWER; /*!< Peripheral power control. */
} NRF_SPIM_Type;
@@ -889,8 +866,8 @@ typedef struct { /*!< AAR Structure __IO uint32_t IRKPTR; /*!< Pointer to the IRK data structure. */
__I uint32_t RESERVED5;
__IO uint32_t ADDRPTR; /*!< Pointer to the resolvable address (6 bytes). */
- __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage
- during resolution. A minimum of 3 bytes must be reserved. */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to a scratch data area used for temporary storage during
+ resolution. A minimum of 3 bytes must be reserved. */
__I uint32_t RESERVED6[697];
__IO uint32_t POWER; /*!< Peripheral power control. */
} NRF_AAR_Type;
@@ -928,8 +905,8 @@ typedef struct { /*!< CCM Structure __IO uint32_t CNFPTR; /*!< Pointer to a data structure holding AES key and NONCE vector. */
__IO uint32_t INPTR; /*!< Pointer to the input packet. */
__IO uint32_t OUTPTR; /*!< Pointer to the output packet. */
- __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage
- during resolution. A minimum of 43 bytes must be reserved. */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to a scratch data area used for temporary storage during
+ resolution. A minimum of 43 bytes must be reserved. */
__I uint32_t RESERVED5[697];
__IO uint32_t POWER; /*!< Peripheral power control. */
} NRF_CCM_Type;
@@ -1083,11 +1060,7 @@ typedef struct { /*!< NVMC Structure __IO uint32_t ERASEPAGE; /*!< Register for erasing a non-protected non-volatile memory page. */
};
__IO uint32_t ERASEALL; /*!< Register for erasing all non-volatile user memory. */
-
- union {
- __IO uint32_t ERASEPCR0; /*!< Register for erasing a protected non-volatile memory page. */
- __IO uint32_t ERASEPROTECTEDPAGE; /*!< Register for erasing a protected non-volatile memory page. */
- };
+ __IO uint32_t ERASEPCR0; /*!< Register for erasing a protected non-volatile memory page. */
__IO uint32_t ERASEUICR; /*!< Register for start erasing User Information Congfiguration Registers. */
} NRF_NVMC_Type;
@@ -1229,7 +1202,6 @@ typedef struct { /*!< GPIO Structure #define NRF_POWER_BASE 0x40000000UL
#define NRF_CLOCK_BASE 0x40000000UL
#define NRF_MPU_BASE 0x40000000UL
-#define NRF_PU_BASE 0x40000000UL
#define NRF_AMLI_BASE 0x40000000UL
#define NRF_RADIO_BASE 0x40001000UL
#define NRF_UART0_BASE 0x40002000UL
@@ -1269,7 +1241,6 @@ typedef struct { /*!< GPIO Structure #define NRF_POWER ((NRF_POWER_Type *) NRF_POWER_BASE)
#define NRF_CLOCK ((NRF_CLOCK_Type *) NRF_CLOCK_BASE)
#define NRF_MPU ((NRF_MPU_Type *) NRF_MPU_BASE)
-#define NRF_PU ((NRF_PU_Type *) NRF_PU_BASE)
#define NRF_AMLI ((NRF_AMLI_Type *) NRF_AMLI_BASE)
#define NRF_RADIO ((NRF_RADIO_Type *) NRF_RADIO_BASE)
#define NRF_UART0 ((NRF_UART_Type *) NRF_UART0_BASE)
diff --git a/os/hal/ports/NRF51/NRF51822/nrf51_bitfields.h b/os/hal/ports/NRF5/NRF51822/nrf51_bitfields.h index 0ab4598..5c5af9a 100644 --- a/os/hal/ports/NRF51/NRF51822/nrf51_bitfields.h +++ b/os/hal/ports/NRF5/NRF51822/nrf51_bitfields.h @@ -1,7088 +1,6892 @@ -/* Copyright (c) 2015, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * * Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * * Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * * Neither the name of Nordic Semiconductor ASA nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ -#ifndef __NRF51_BITS_H -#define __NRF51_BITS_H - -/*lint ++flb "Enter library region" */ - -/* Peripheral: AAR */ -/* Description: Accelerated Address Resolver. */ - -/* Register: AAR_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on NOTRESOLVED event. */ -#define AAR_INTENSET_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ -#define AAR_INTENSET_NOTRESOLVED_Msk (0x1UL << AAR_INTENSET_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ -#define AAR_INTENSET_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENSET_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENSET_NOTRESOLVED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on RESOLVED event. */ -#define AAR_INTENSET_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ -#define AAR_INTENSET_RESOLVED_Msk (0x1UL << AAR_INTENSET_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ -#define AAR_INTENSET_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENSET_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENSET_RESOLVED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on END event. */ -#define AAR_INTENSET_END_Pos (0UL) /*!< Position of END field. */ -#define AAR_INTENSET_END_Msk (0x1UL << AAR_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define AAR_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: AAR_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on NOTRESOLVED event. */ -#define AAR_INTENCLR_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ -#define AAR_INTENCLR_NOTRESOLVED_Msk (0x1UL << AAR_INTENCLR_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ -#define AAR_INTENCLR_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENCLR_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENCLR_NOTRESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on RESOLVED event. */ -#define AAR_INTENCLR_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ -#define AAR_INTENCLR_RESOLVED_Msk (0x1UL << AAR_INTENCLR_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ -#define AAR_INTENCLR_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENCLR_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENCLR_RESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on ENDKSGEN event. */ -#define AAR_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ -#define AAR_INTENCLR_END_Msk (0x1UL << AAR_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define AAR_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define AAR_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define AAR_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: AAR_STATUS */ -/* Description: Resolution status. */ - -/* Bits 3..0 : The IRK used last time an address was resolved. */ -#define AAR_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */ -#define AAR_STATUS_STATUS_Msk (0xFUL << AAR_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */ - -/* Register: AAR_ENABLE */ -/* Description: Enable AAR. */ - -/* Bits 1..0 : Enable AAR. */ -#define AAR_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define AAR_ENABLE_ENABLE_Msk (0x3UL << AAR_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define AAR_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled AAR. */ -#define AAR_ENABLE_ENABLE_Enabled (0x03UL) /*!< Enable AAR. */ - -/* Register: AAR_NIRK */ -/* Description: Number of Identity root Keys in the IRK data structure. */ - -/* Bits 4..0 : Number of Identity root Keys in the IRK data structure. */ -#define AAR_NIRK_NIRK_Pos (0UL) /*!< Position of NIRK field. */ -#define AAR_NIRK_NIRK_Msk (0x1FUL << AAR_NIRK_NIRK_Pos) /*!< Bit mask of NIRK field. */ - -/* Register: AAR_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define AAR_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define AAR_POWER_POWER_Msk (0x1UL << AAR_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define AAR_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define AAR_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: ADC */ -/* Description: Analog to digital converter. */ - -/* Register: ADC_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 0 : Enable interrupt on END event. */ -#define ADC_INTENSET_END_Pos (0UL) /*!< Position of END field. */ -#define ADC_INTENSET_END_Msk (0x1UL << ADC_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define ADC_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define ADC_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define ADC_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: ADC_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 0 : Disable interrupt on END event. */ -#define ADC_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ -#define ADC_INTENCLR_END_Msk (0x1UL << ADC_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define ADC_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define ADC_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define ADC_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: ADC_BUSY */ -/* Description: ADC busy register. */ - -/* Bit 0 : ADC busy register. */ -#define ADC_BUSY_BUSY_Pos (0UL) /*!< Position of BUSY field. */ -#define ADC_BUSY_BUSY_Msk (0x1UL << ADC_BUSY_BUSY_Pos) /*!< Bit mask of BUSY field. */ -#define ADC_BUSY_BUSY_Ready (0UL) /*!< No ongoing ADC conversion is taking place. ADC is ready. */ -#define ADC_BUSY_BUSY_Busy (1UL) /*!< An ADC conversion is taking place. ADC is busy. */ - -/* Register: ADC_ENABLE */ -/* Description: ADC enable. */ - -/* Bits 1..0 : ADC enable. */ -#define ADC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define ADC_ENABLE_ENABLE_Msk (0x3UL << ADC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define ADC_ENABLE_ENABLE_Disabled (0x00UL) /*!< ADC is disabled. */ -#define ADC_ENABLE_ENABLE_Enabled (0x01UL) /*!< ADC is enabled. If an analog input pin is selected as source of the conversion, the selected pin is configured as an analog input. */ - -/* Register: ADC_CONFIG */ -/* Description: ADC configuration register. */ - -/* Bits 17..16 : ADC external reference pin selection. */ -#define ADC_CONFIG_EXTREFSEL_Pos (16UL) /*!< Position of EXTREFSEL field. */ -#define ADC_CONFIG_EXTREFSEL_Msk (0x3UL << ADC_CONFIG_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ -#define ADC_CONFIG_EXTREFSEL_None (0UL) /*!< Analog external reference inputs disabled. */ -#define ADC_CONFIG_EXTREFSEL_AnalogReference0 (1UL) /*!< Use analog reference 0 as reference. */ -#define ADC_CONFIG_EXTREFSEL_AnalogReference1 (2UL) /*!< Use analog reference 1 as reference. */ - -/* Bits 15..8 : ADC analog pin selection. */ -#define ADC_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ -#define ADC_CONFIG_PSEL_Msk (0xFFUL << ADC_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ -#define ADC_CONFIG_PSEL_Disabled (0UL) /*!< Analog input pins disabled. */ -#define ADC_CONFIG_PSEL_AnalogInput0 (1UL) /*!< Use analog input 0 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput1 (2UL) /*!< Use analog input 1 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput2 (4UL) /*!< Use analog input 2 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput3 (8UL) /*!< Use analog input 3 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput4 (16UL) /*!< Use analog input 4 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput5 (32UL) /*!< Use analog input 5 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput6 (64UL) /*!< Use analog input 6 as analog input. */ -#define ADC_CONFIG_PSEL_AnalogInput7 (128UL) /*!< Use analog input 7 as analog input. */ - -/* Bits 6..5 : ADC reference selection. */ -#define ADC_CONFIG_REFSEL_Pos (5UL) /*!< Position of REFSEL field. */ -#define ADC_CONFIG_REFSEL_Msk (0x3UL << ADC_CONFIG_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ -#define ADC_CONFIG_REFSEL_VBG (0x00UL) /*!< Use internal 1.2V bandgap voltage as reference for conversion. */ -#define ADC_CONFIG_REFSEL_External (0x01UL) /*!< Use external source configured by EXTREFSEL as reference for conversion. */ -#define ADC_CONFIG_REFSEL_SupplyOneHalfPrescaling (0x02UL) /*!< Use supply voltage with 1/2 prescaling as reference for conversion. Only usable when supply voltage is between 1.7V and 2.6V. */ -#define ADC_CONFIG_REFSEL_SupplyOneThirdPrescaling (0x03UL) /*!< Use supply voltage with 1/3 prescaling as reference for conversion. Only usable when supply voltage is between 2.5V and 3.6V. */ - -/* Bits 4..2 : ADC input selection. */ -#define ADC_CONFIG_INPSEL_Pos (2UL) /*!< Position of INPSEL field. */ -#define ADC_CONFIG_INPSEL_Msk (0x7UL << ADC_CONFIG_INPSEL_Pos) /*!< Bit mask of INPSEL field. */ -#define ADC_CONFIG_INPSEL_AnalogInputNoPrescaling (0x00UL) /*!< Analog input specified by PSEL with no prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_AnalogInputTwoThirdsPrescaling (0x01UL) /*!< Analog input specified by PSEL with 2/3 prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling (0x02UL) /*!< Analog input specified by PSEL with 1/3 prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_SupplyTwoThirdsPrescaling (0x05UL) /*!< Supply voltage with 2/3 prescaling used as input for the conversion. */ -#define ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling (0x06UL) /*!< Supply voltage with 1/3 prescaling used as input for the conversion. */ - -/* Bits 1..0 : ADC resolution. */ -#define ADC_CONFIG_RES_Pos (0UL) /*!< Position of RES field. */ -#define ADC_CONFIG_RES_Msk (0x3UL << ADC_CONFIG_RES_Pos) /*!< Bit mask of RES field. */ -#define ADC_CONFIG_RES_8bit (0x00UL) /*!< 8bit ADC resolution. */ -#define ADC_CONFIG_RES_9bit (0x01UL) /*!< 9bit ADC resolution. */ -#define ADC_CONFIG_RES_10bit (0x02UL) /*!< 10bit ADC resolution. */ - -/* Register: ADC_RESULT */ -/* Description: Result of ADC conversion. */ - -/* Bits 9..0 : Result of ADC conversion. */ -#define ADC_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ -#define ADC_RESULT_RESULT_Msk (0x3FFUL << ADC_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ - -/* Register: ADC_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define ADC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define ADC_POWER_POWER_Msk (0x1UL << ADC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define ADC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define ADC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: AMLI */ -/* Description: AHB Multi-Layer Interface. */ - -/* Register: AMLI_RAMPRI_CPU0 */ -/* Description: Configurable priority configuration register for CPU0. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_CPU0_RAM7_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_CPU0_RAM6_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_CPU0_RAM5_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_CPU0_RAM4_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_CPU0_RAM3_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_CPU0_RAM2_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_CPU0_RAM1_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_CPU0_RAM0_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CPU0_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_SPIS1 */ -/* Description: Configurable priority configuration register for SPIS1. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_SPIS1_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_RADIO */ -/* Description: Configurable priority configuration register for RADIO. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_RADIO_RAM7_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_RADIO_RAM6_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_RADIO_RAM5_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_RADIO_RAM4_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_RADIO_RAM3_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_RADIO_RAM2_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_RADIO_RAM1_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_RADIO_RAM0_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_RADIO_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_ECB */ -/* Description: Configurable priority configuration register for ECB. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_ECB_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_ECB_RAM7_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_ECB_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_ECB_RAM6_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_ECB_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_ECB_RAM5_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_ECB_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_ECB_RAM4_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_ECB_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_ECB_RAM3_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_ECB_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_ECB_RAM2_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_ECB_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_ECB_RAM1_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_ECB_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_ECB_RAM0_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_ECB_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_CCM */ -/* Description: Configurable priority configuration register for CCM. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_CCM_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_CCM_RAM7_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_CCM_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_CCM_RAM6_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_CCM_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_CCM_RAM5_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_CCM_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_CCM_RAM4_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_CCM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_CCM_RAM3_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_CCM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_CCM_RAM2_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_CCM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_CCM_RAM1_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_CCM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_CCM_RAM0_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_CCM_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Register: AMLI_RAMPRI_AAR */ -/* Description: Configurable priority configuration register for AAR. */ - -/* Bits 31..28 : Configuration field for RAM block 7. */ -#define AMLI_RAMPRI_AAR_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ -#define AMLI_RAMPRI_AAR_RAM7_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM7_Pos) /*!< Bit mask of RAM7 field. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 27..24 : Configuration field for RAM block 6. */ -#define AMLI_RAMPRI_AAR_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ -#define AMLI_RAMPRI_AAR_RAM6_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM6_Pos) /*!< Bit mask of RAM6 field. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 23..20 : Configuration field for RAM block 5. */ -#define AMLI_RAMPRI_AAR_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ -#define AMLI_RAMPRI_AAR_RAM5_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM5_Pos) /*!< Bit mask of RAM5 field. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 19..16 : Configuration field for RAM block 4. */ -#define AMLI_RAMPRI_AAR_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ -#define AMLI_RAMPRI_AAR_RAM4_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM4_Pos) /*!< Bit mask of RAM4 field. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 15..12 : Configuration field for RAM block 3. */ -#define AMLI_RAMPRI_AAR_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ -#define AMLI_RAMPRI_AAR_RAM3_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM3_Pos) /*!< Bit mask of RAM3 field. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 11..8 : Configuration field for RAM block 2. */ -#define AMLI_RAMPRI_AAR_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ -#define AMLI_RAMPRI_AAR_RAM2_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM2_Pos) /*!< Bit mask of RAM2 field. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 7..4 : Configuration field for RAM block 1. */ -#define AMLI_RAMPRI_AAR_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ -#define AMLI_RAMPRI_AAR_RAM1_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM1_Pos) /*!< Bit mask of RAM1 field. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ - -/* Bits 3..0 : Configuration field for RAM block 0. */ -#define AMLI_RAMPRI_AAR_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ -#define AMLI_RAMPRI_AAR_RAM0_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM0_Pos) /*!< Bit mask of RAM0 field. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ -#define AMLI_RAMPRI_AAR_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ - - -/* Peripheral: CCM */ -/* Description: AES CCM Mode Encryption. */ - -/* Register: CCM_SHORTS */ -/* Description: Shortcuts for the CCM. */ - -/* Bit 0 : Shortcut between ENDKSGEN event and CRYPT task. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Pos (0UL) /*!< Position of ENDKSGEN_CRYPT field. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Msk (0x1UL << CCM_SHORTS_ENDKSGEN_CRYPT_Pos) /*!< Bit mask of ENDKSGEN_CRYPT field. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Disabled (0UL) /*!< Shortcut disabled. */ -#define CCM_SHORTS_ENDKSGEN_CRYPT_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: CCM_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on ERROR event. */ -#define CCM_INTENSET_ERROR_Pos (2UL) /*!< Position of ERROR field. */ -#define CCM_INTENSET_ERROR_Msk (0x1UL << CCM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define CCM_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on ENDCRYPT event. */ -#define CCM_INTENSET_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ -#define CCM_INTENSET_ENDCRYPT_Msk (0x1UL << CCM_INTENSET_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ -#define CCM_INTENSET_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENSET_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENSET_ENDCRYPT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on ENDKSGEN event. */ -#define CCM_INTENSET_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ -#define CCM_INTENSET_ENDKSGEN_Msk (0x1UL << CCM_INTENSET_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ -#define CCM_INTENSET_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENSET_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENSET_ENDKSGEN_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: CCM_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on ERROR event. */ -#define CCM_INTENCLR_ERROR_Pos (2UL) /*!< Position of ERROR field. */ -#define CCM_INTENCLR_ERROR_Msk (0x1UL << CCM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define CCM_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on ENDCRYPT event. */ -#define CCM_INTENCLR_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ -#define CCM_INTENCLR_ENDCRYPT_Msk (0x1UL << CCM_INTENCLR_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ -#define CCM_INTENCLR_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENCLR_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENCLR_ENDCRYPT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on ENDKSGEN event. */ -#define CCM_INTENCLR_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ -#define CCM_INTENCLR_ENDKSGEN_Msk (0x1UL << CCM_INTENCLR_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ -#define CCM_INTENCLR_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ -#define CCM_INTENCLR_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ -#define CCM_INTENCLR_ENDKSGEN_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: CCM_MICSTATUS */ -/* Description: CCM RX MIC check result. */ - -/* Bit 0 : Result of the MIC check performed during the previous CCM RX STARTCRYPT */ -#define CCM_MICSTATUS_MICSTATUS_Pos (0UL) /*!< Position of MICSTATUS field. */ -#define CCM_MICSTATUS_MICSTATUS_Msk (0x1UL << CCM_MICSTATUS_MICSTATUS_Pos) /*!< Bit mask of MICSTATUS field. */ -#define CCM_MICSTATUS_MICSTATUS_CheckFailed (0UL) /*!< MIC check failed. */ -#define CCM_MICSTATUS_MICSTATUS_CheckPassed (1UL) /*!< MIC check passed. */ - -/* Register: CCM_ENABLE */ -/* Description: CCM enable. */ - -/* Bits 1..0 : CCM enable. */ -#define CCM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define CCM_ENABLE_ENABLE_Msk (0x3UL << CCM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define CCM_ENABLE_ENABLE_Disabled (0x00UL) /*!< CCM is disabled. */ -#define CCM_ENABLE_ENABLE_Enabled (0x02UL) /*!< CCM is enabled. */ - -/* Register: CCM_MODE */ -/* Description: Operation mode. */ - -/* Bit 0 : CCM mode operation. */ -#define CCM_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define CCM_MODE_MODE_Msk (0x1UL << CCM_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ -#define CCM_MODE_MODE_Encryption (0UL) /*!< CCM mode TX */ -#define CCM_MODE_MODE_Decryption (1UL) /*!< CCM mode TX */ - -/* Register: CCM_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define CCM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define CCM_POWER_POWER_Msk (0x1UL << CCM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define CCM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define CCM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: CLOCK */ -/* Description: Clock control. */ - -/* Register: CLOCK_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 4 : Enable interrupt on CTTO event. */ -#define CLOCK_INTENSET_CTTO_Pos (4UL) /*!< Position of CTTO field. */ -#define CLOCK_INTENSET_CTTO_Msk (0x1UL << CLOCK_INTENSET_CTTO_Pos) /*!< Bit mask of CTTO field. */ -#define CLOCK_INTENSET_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_CTTO_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 3 : Enable interrupt on DONE event. */ -#define CLOCK_INTENSET_DONE_Pos (3UL) /*!< Position of DONE field. */ -#define CLOCK_INTENSET_DONE_Msk (0x1UL << CLOCK_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */ -#define CLOCK_INTENSET_DONE_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_DONE_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_DONE_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on LFCLKSTARTED event. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_LFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on HFCLKSTARTED event. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENSET_HFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: CLOCK_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 4 : Disable interrupt on CTTO event. */ -#define CLOCK_INTENCLR_CTTO_Pos (4UL) /*!< Position of CTTO field. */ -#define CLOCK_INTENCLR_CTTO_Msk (0x1UL << CLOCK_INTENCLR_CTTO_Pos) /*!< Bit mask of CTTO field. */ -#define CLOCK_INTENCLR_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_CTTO_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 3 : Disable interrupt on DONE event. */ -#define CLOCK_INTENCLR_DONE_Pos (3UL) /*!< Position of DONE field. */ -#define CLOCK_INTENCLR_DONE_Msk (0x1UL << CLOCK_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */ -#define CLOCK_INTENCLR_DONE_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_DONE_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_DONE_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on LFCLKSTARTED event. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_LFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on HFCLKSTARTED event. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define CLOCK_INTENCLR_HFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: CLOCK_HFCLKRUN */ -/* Description: Task HFCLKSTART trigger status. */ - -/* Bit 0 : Task HFCLKSTART trigger status. */ -#define CLOCK_HFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ -#define CLOCK_HFCLKRUN_STATUS_Msk (0x1UL << CLOCK_HFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ -#define CLOCK_HFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task HFCLKSTART has not been triggered. */ -#define CLOCK_HFCLKRUN_STATUS_Triggered (1UL) /*!< Task HFCLKSTART has been triggered. */ - -/* Register: CLOCK_HFCLKSTAT */ -/* Description: High frequency clock status. */ - -/* Bit 16 : State for the HFCLK. */ -#define CLOCK_HFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ -#define CLOCK_HFCLKSTAT_STATE_Msk (0x1UL << CLOCK_HFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ -#define CLOCK_HFCLKSTAT_STATE_NotRunning (0UL) /*!< HFCLK clock not running. */ -#define CLOCK_HFCLKSTAT_STATE_Running (1UL) /*!< HFCLK clock running. */ - -/* Bit 0 : Active clock source for the HF clock. */ -#define CLOCK_HFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_HFCLKSTAT_SRC_Msk (0x1UL << CLOCK_HFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_HFCLKSTAT_SRC_RC (0UL) /*!< Internal 16MHz RC oscillator running and generating the HFCLK clock. */ -#define CLOCK_HFCLKSTAT_SRC_Xtal (1UL) /*!< External 16MHz/32MHz crystal oscillator running and generating the HFCLK clock. */ - -/* Register: CLOCK_LFCLKRUN */ -/* Description: Task LFCLKSTART triggered status. */ - -/* Bit 0 : Task LFCLKSTART triggered status. */ -#define CLOCK_LFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ -#define CLOCK_LFCLKRUN_STATUS_Msk (0x1UL << CLOCK_LFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ -#define CLOCK_LFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task LFCLKSTART has not been triggered. */ -#define CLOCK_LFCLKRUN_STATUS_Triggered (1UL) /*!< Task LFCLKSTART has been triggered. */ - -/* Register: CLOCK_LFCLKSTAT */ -/* Description: Low frequency clock status. */ - -/* Bit 16 : State for the LF clock. */ -#define CLOCK_LFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ -#define CLOCK_LFCLKSTAT_STATE_Msk (0x1UL << CLOCK_LFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ -#define CLOCK_LFCLKSTAT_STATE_NotRunning (0UL) /*!< LFCLK clock not running. */ -#define CLOCK_LFCLKSTAT_STATE_Running (1UL) /*!< LFCLK clock running. */ - -/* Bits 1..0 : Active clock source for the LF clock. */ -#define CLOCK_LFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_LFCLKSTAT_SRC_Msk (0x3UL << CLOCK_LFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_LFCLKSTAT_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator running and generating the LFCLK clock. */ -#define CLOCK_LFCLKSTAT_SRC_Xtal (1UL) /*!< External 32KiHz crystal oscillator running and generating the LFCLK clock. */ -#define CLOCK_LFCLKSTAT_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from the HFCLK running and generating the LFCLK clock. */ - -/* Register: CLOCK_LFCLKSRCCOPY */ -/* Description: Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ - -/* Bits 1..0 : Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Msk (0x3UL << CLOCK_LFCLKSRCCOPY_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_LFCLKSRCCOPY_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ -#define CLOCK_LFCLKSRCCOPY_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ - -/* Register: CLOCK_LFCLKSRC */ -/* Description: Clock source for the LFCLK clock. */ - -/* Bits 1..0 : Clock source. */ -#define CLOCK_LFCLKSRC_SRC_Pos (0UL) /*!< Position of SRC field. */ -#define CLOCK_LFCLKSRC_SRC_Msk (0x3UL << CLOCK_LFCLKSRC_SRC_Pos) /*!< Bit mask of SRC field. */ -#define CLOCK_LFCLKSRC_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ -#define CLOCK_LFCLKSRC_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ -#define CLOCK_LFCLKSRC_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ - -/* Register: CLOCK_CTIV */ -/* Description: Calibration timer interval. */ - -/* Bits 6..0 : Calibration timer interval in 0.25s resolution. */ -#define CLOCK_CTIV_CTIV_Pos (0UL) /*!< Position of CTIV field. */ -#define CLOCK_CTIV_CTIV_Msk (0x7FUL << CLOCK_CTIV_CTIV_Pos) /*!< Bit mask of CTIV field. */ - -/* Register: CLOCK_XTALFREQ */ -/* Description: Crystal frequency. */ - -/* Bits 7..0 : External Xtal frequency selection. */ -#define CLOCK_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ -#define CLOCK_XTALFREQ_XTALFREQ_Msk (0xFFUL << CLOCK_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ -#define CLOCK_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz xtal is used as source for the HFCLK oscillator. */ -#define CLOCK_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz xtal is used as source for the HFCLK oscillator. */ - - -/* Peripheral: ECB */ -/* Description: AES ECB Mode Encryption. */ - -/* Register: ECB_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 1 : Enable interrupt on ERRORECB event. */ -#define ECB_INTENSET_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ -#define ECB_INTENSET_ERRORECB_Msk (0x1UL << ECB_INTENSET_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ -#define ECB_INTENSET_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENSET_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENSET_ERRORECB_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on ENDECB event. */ -#define ECB_INTENSET_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ -#define ECB_INTENSET_ENDECB_Msk (0x1UL << ECB_INTENSET_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ -#define ECB_INTENSET_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENSET_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENSET_ENDECB_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: ECB_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 1 : Disable interrupt on ERRORECB event. */ -#define ECB_INTENCLR_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ -#define ECB_INTENCLR_ERRORECB_Msk (0x1UL << ECB_INTENCLR_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ -#define ECB_INTENCLR_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENCLR_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENCLR_ERRORECB_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on ENDECB event. */ -#define ECB_INTENCLR_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ -#define ECB_INTENCLR_ENDECB_Msk (0x1UL << ECB_INTENCLR_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ -#define ECB_INTENCLR_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ -#define ECB_INTENCLR_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ -#define ECB_INTENCLR_ENDECB_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: ECB_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define ECB_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define ECB_POWER_POWER_Msk (0x1UL << ECB_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define ECB_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define ECB_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: FICR */ -/* Description: Factory Information Configuration. */ - -/* Register: FICR_PPFC */ -/* Description: Pre-programmed factory code present. */ - -/* Bits 7..0 : Pre-programmed factory code present. */ -#define FICR_PPFC_PPFC_Pos (0UL) /*!< Position of PPFC field. */ -#define FICR_PPFC_PPFC_Msk (0xFFUL << FICR_PPFC_PPFC_Pos) /*!< Bit mask of PPFC field. */ -#define FICR_PPFC_PPFC_Present (0x00UL) /*!< Present. */ -#define FICR_PPFC_PPFC_NotPresent (0xFFUL) /*!< Not present. */ - -/* Register: FICR_CONFIGID */ -/* Description: Configuration identifier. */ - -/* Bits 31..16 : Firmware Identification Number pre-loaded into the flash. */ -#define FICR_CONFIGID_FWID_Pos (16UL) /*!< Position of FWID field. */ -#define FICR_CONFIGID_FWID_Msk (0xFFFFUL << FICR_CONFIGID_FWID_Pos) /*!< Bit mask of FWID field. */ - -/* Bits 15..0 : Hardware Identification Number. */ -#define FICR_CONFIGID_HWID_Pos (0UL) /*!< Position of HWID field. */ -#define FICR_CONFIGID_HWID_Msk (0xFFFFUL << FICR_CONFIGID_HWID_Pos) /*!< Bit mask of HWID field. */ - -/* Register: FICR_DEVICEADDRTYPE */ -/* Description: Device address type. */ - -/* Bit 0 : Device address type. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos (0UL) /*!< Position of DEVICEADDRTYPE field. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Msk (0x1UL << FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos) /*!< Bit mask of DEVICEADDRTYPE field. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Public (0UL) /*!< Public address. */ -#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Random (1UL) /*!< Random address. */ - -/* Register: FICR_OVERRIDEEN */ -/* Description: Radio calibration override enable. */ - -/* Bit 3 : Override default values for BLE_1Mbit mode. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_Pos (3UL) /*!< Position of BLE_1MBIT field. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_BLE_1MBIT_Pos) /*!< Bit mask of BLE_1MBIT field. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_Override (0UL) /*!< Override the default values for BLE_1Mbit mode. */ -#define FICR_OVERRIDEEN_BLE_1MBIT_NotOverride (1UL) /*!< Do not override the default values for BLE_1Mbit mode. */ - -/* Bit 0 : Override default values for NRF_1Mbit mode. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_Pos (0UL) /*!< Position of NRF_1MBIT field. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_NRF_1MBIT_Pos) /*!< Bit mask of NRF_1MBIT field. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_Override (0UL) /*!< Override the default values for NRF_1Mbit mode. */ -#define FICR_OVERRIDEEN_NRF_1MBIT_NotOverride (1UL) /*!< Do not override the default values for NRF_1Mbit mode. */ - - -/* Peripheral: GPIO */ -/* Description: General purpose input and output. */ - -/* Register: GPIO_OUT */ -/* Description: Write GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_OUT_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_OUT_PIN31_Msk (0x1UL << GPIO_OUT_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_OUT_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_OUT_PIN30_Msk (0x1UL << GPIO_OUT_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_OUT_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_OUT_PIN29_Msk (0x1UL << GPIO_OUT_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_OUT_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_OUT_PIN28_Msk (0x1UL << GPIO_OUT_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_OUT_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_OUT_PIN27_Msk (0x1UL << GPIO_OUT_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_OUT_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_OUT_PIN26_Msk (0x1UL << GPIO_OUT_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_OUT_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_OUT_PIN25_Msk (0x1UL << GPIO_OUT_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_OUT_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_OUT_PIN24_Msk (0x1UL << GPIO_OUT_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_OUT_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_OUT_PIN23_Msk (0x1UL << GPIO_OUT_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_OUT_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_OUT_PIN22_Msk (0x1UL << GPIO_OUT_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_OUT_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_OUT_PIN21_Msk (0x1UL << GPIO_OUT_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_OUT_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_OUT_PIN20_Msk (0x1UL << GPIO_OUT_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_OUT_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_OUT_PIN19_Msk (0x1UL << GPIO_OUT_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_OUT_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_OUT_PIN18_Msk (0x1UL << GPIO_OUT_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_OUT_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_OUT_PIN17_Msk (0x1UL << GPIO_OUT_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_OUT_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_OUT_PIN16_Msk (0x1UL << GPIO_OUT_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_OUT_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_OUT_PIN15_Msk (0x1UL << GPIO_OUT_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_OUT_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_OUT_PIN14_Msk (0x1UL << GPIO_OUT_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_OUT_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_OUT_PIN13_Msk (0x1UL << GPIO_OUT_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_OUT_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_OUT_PIN12_Msk (0x1UL << GPIO_OUT_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_OUT_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_OUT_PIN11_Msk (0x1UL << GPIO_OUT_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_OUT_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_OUT_PIN10_Msk (0x1UL << GPIO_OUT_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_OUT_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_OUT_PIN9_Msk (0x1UL << GPIO_OUT_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_OUT_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_OUT_PIN8_Msk (0x1UL << GPIO_OUT_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_OUT_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_OUT_PIN7_Msk (0x1UL << GPIO_OUT_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_OUT_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_OUT_PIN6_Msk (0x1UL << GPIO_OUT_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_OUT_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_OUT_PIN5_Msk (0x1UL << GPIO_OUT_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_OUT_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_OUT_PIN4_Msk (0x1UL << GPIO_OUT_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_OUT_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_OUT_PIN3_Msk (0x1UL << GPIO_OUT_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_OUT_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_OUT_PIN2_Msk (0x1UL << GPIO_OUT_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_OUT_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_OUT_PIN1_Msk (0x1UL << GPIO_OUT_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_OUT_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_OUT_PIN0_Msk (0x1UL << GPIO_OUT_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */ - -/* Register: GPIO_OUTSET */ -/* Description: Set individual bits in GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_OUTSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_OUTSET_PIN31_Msk (0x1UL << GPIO_OUTSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_OUTSET_PIN31_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_OUTSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_OUTSET_PIN30_Msk (0x1UL << GPIO_OUTSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_OUTSET_PIN30_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_OUTSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_OUTSET_PIN29_Msk (0x1UL << GPIO_OUTSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_OUTSET_PIN29_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_OUTSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_OUTSET_PIN28_Msk (0x1UL << GPIO_OUTSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_OUTSET_PIN28_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_OUTSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_OUTSET_PIN27_Msk (0x1UL << GPIO_OUTSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_OUTSET_PIN27_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_OUTSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_OUTSET_PIN26_Msk (0x1UL << GPIO_OUTSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_OUTSET_PIN26_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_OUTSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_OUTSET_PIN25_Msk (0x1UL << GPIO_OUTSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_OUTSET_PIN25_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_OUTSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_OUTSET_PIN24_Msk (0x1UL << GPIO_OUTSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_OUTSET_PIN24_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_OUTSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_OUTSET_PIN23_Msk (0x1UL << GPIO_OUTSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_OUTSET_PIN23_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_OUTSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_OUTSET_PIN22_Msk (0x1UL << GPIO_OUTSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_OUTSET_PIN22_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_OUTSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_OUTSET_PIN21_Msk (0x1UL << GPIO_OUTSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_OUTSET_PIN21_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_OUTSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_OUTSET_PIN20_Msk (0x1UL << GPIO_OUTSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_OUTSET_PIN20_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_OUTSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_OUTSET_PIN19_Msk (0x1UL << GPIO_OUTSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_OUTSET_PIN19_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_OUTSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_OUTSET_PIN18_Msk (0x1UL << GPIO_OUTSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_OUTSET_PIN18_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_OUTSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_OUTSET_PIN17_Msk (0x1UL << GPIO_OUTSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_OUTSET_PIN17_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_OUTSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_OUTSET_PIN16_Msk (0x1UL << GPIO_OUTSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_OUTSET_PIN16_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_OUTSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_OUTSET_PIN15_Msk (0x1UL << GPIO_OUTSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_OUTSET_PIN15_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_OUTSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_OUTSET_PIN14_Msk (0x1UL << GPIO_OUTSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_OUTSET_PIN14_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_OUTSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_OUTSET_PIN13_Msk (0x1UL << GPIO_OUTSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_OUTSET_PIN13_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_OUTSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_OUTSET_PIN12_Msk (0x1UL << GPIO_OUTSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_OUTSET_PIN12_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_OUTSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_OUTSET_PIN11_Msk (0x1UL << GPIO_OUTSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_OUTSET_PIN11_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN11_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN11_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_OUTSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_OUTSET_PIN10_Msk (0x1UL << GPIO_OUTSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_OUTSET_PIN10_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN10_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN10_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_OUTSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_OUTSET_PIN9_Msk (0x1UL << GPIO_OUTSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_OUTSET_PIN9_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN9_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN9_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_OUTSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_OUTSET_PIN8_Msk (0x1UL << GPIO_OUTSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_OUTSET_PIN8_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN8_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN8_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_OUTSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_OUTSET_PIN7_Msk (0x1UL << GPIO_OUTSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_OUTSET_PIN7_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN7_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN7_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_OUTSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_OUTSET_PIN6_Msk (0x1UL << GPIO_OUTSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_OUTSET_PIN6_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN6_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN6_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_OUTSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_OUTSET_PIN5_Msk (0x1UL << GPIO_OUTSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_OUTSET_PIN5_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN5_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN5_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_OUTSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_OUTSET_PIN4_Msk (0x1UL << GPIO_OUTSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_OUTSET_PIN4_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN4_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN4_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_OUTSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_OUTSET_PIN3_Msk (0x1UL << GPIO_OUTSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_OUTSET_PIN3_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN3_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN3_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_OUTSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_OUTSET_PIN2_Msk (0x1UL << GPIO_OUTSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_OUTSET_PIN2_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN2_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN2_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_OUTSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_OUTSET_PIN1_Msk (0x1UL << GPIO_OUTSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_OUTSET_PIN1_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN1_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN1_Set (1UL) /*!< Set pin driver high. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_OUTSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_OUTSET_PIN0_Msk (0x1UL << GPIO_OUTSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_OUTSET_PIN0_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTSET_PIN0_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTSET_PIN0_Set (1UL) /*!< Set pin driver high. */ - -/* Register: GPIO_OUTCLR */ -/* Description: Clear individual bits in GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_OUTCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_OUTCLR_PIN31_Msk (0x1UL << GPIO_OUTCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_OUTCLR_PIN31_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN31_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN31_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_OUTCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_OUTCLR_PIN30_Msk (0x1UL << GPIO_OUTCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_OUTCLR_PIN30_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN30_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN30_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_OUTCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_OUTCLR_PIN29_Msk (0x1UL << GPIO_OUTCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_OUTCLR_PIN29_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN29_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN29_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_OUTCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_OUTCLR_PIN28_Msk (0x1UL << GPIO_OUTCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_OUTCLR_PIN28_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN28_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN28_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_OUTCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_OUTCLR_PIN27_Msk (0x1UL << GPIO_OUTCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_OUTCLR_PIN27_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN27_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN27_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_OUTCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_OUTCLR_PIN26_Msk (0x1UL << GPIO_OUTCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_OUTCLR_PIN26_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN26_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN26_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_OUTCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_OUTCLR_PIN25_Msk (0x1UL << GPIO_OUTCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_OUTCLR_PIN25_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN25_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN25_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_OUTCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_OUTCLR_PIN24_Msk (0x1UL << GPIO_OUTCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_OUTCLR_PIN24_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN24_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN24_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_OUTCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_OUTCLR_PIN23_Msk (0x1UL << GPIO_OUTCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_OUTCLR_PIN23_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN23_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN23_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_OUTCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_OUTCLR_PIN22_Msk (0x1UL << GPIO_OUTCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_OUTCLR_PIN22_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN22_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN22_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_OUTCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_OUTCLR_PIN21_Msk (0x1UL << GPIO_OUTCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_OUTCLR_PIN21_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN21_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN21_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_OUTCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_OUTCLR_PIN20_Msk (0x1UL << GPIO_OUTCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_OUTCLR_PIN20_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN20_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN20_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_OUTCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_OUTCLR_PIN19_Msk (0x1UL << GPIO_OUTCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_OUTCLR_PIN19_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN19_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN19_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_OUTCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_OUTCLR_PIN18_Msk (0x1UL << GPIO_OUTCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_OUTCLR_PIN18_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN18_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN18_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_OUTCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_OUTCLR_PIN17_Msk (0x1UL << GPIO_OUTCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_OUTCLR_PIN17_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN17_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN17_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_OUTCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_OUTCLR_PIN16_Msk (0x1UL << GPIO_OUTCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_OUTCLR_PIN16_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN16_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN16_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_OUTCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_OUTCLR_PIN15_Msk (0x1UL << GPIO_OUTCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_OUTCLR_PIN15_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN15_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN15_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_OUTCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_OUTCLR_PIN14_Msk (0x1UL << GPIO_OUTCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_OUTCLR_PIN14_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN14_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN14_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_OUTCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_OUTCLR_PIN13_Msk (0x1UL << GPIO_OUTCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_OUTCLR_PIN13_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN13_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN13_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_OUTCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_OUTCLR_PIN12_Msk (0x1UL << GPIO_OUTCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_OUTCLR_PIN12_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN12_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN12_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_OUTCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_OUTCLR_PIN11_Msk (0x1UL << GPIO_OUTCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_OUTCLR_PIN11_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN11_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN11_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_OUTCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_OUTCLR_PIN10_Msk (0x1UL << GPIO_OUTCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_OUTCLR_PIN10_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN10_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN10_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_OUTCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_OUTCLR_PIN9_Msk (0x1UL << GPIO_OUTCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_OUTCLR_PIN9_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN9_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN9_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_OUTCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_OUTCLR_PIN8_Msk (0x1UL << GPIO_OUTCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_OUTCLR_PIN8_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN8_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN8_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_OUTCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_OUTCLR_PIN7_Msk (0x1UL << GPIO_OUTCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_OUTCLR_PIN7_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN7_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN7_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_OUTCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_OUTCLR_PIN6_Msk (0x1UL << GPIO_OUTCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_OUTCLR_PIN6_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN6_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN6_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_OUTCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_OUTCLR_PIN5_Msk (0x1UL << GPIO_OUTCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_OUTCLR_PIN5_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN5_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN5_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_OUTCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_OUTCLR_PIN4_Msk (0x1UL << GPIO_OUTCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_OUTCLR_PIN4_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN4_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN4_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_OUTCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_OUTCLR_PIN3_Msk (0x1UL << GPIO_OUTCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_OUTCLR_PIN3_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN3_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN3_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_OUTCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_OUTCLR_PIN2_Msk (0x1UL << GPIO_OUTCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_OUTCLR_PIN2_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN2_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN2_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_OUTCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_OUTCLR_PIN1_Msk (0x1UL << GPIO_OUTCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_OUTCLR_PIN1_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN1_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN1_Clear (1UL) /*!< Set pin driver low. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_OUTCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_OUTCLR_PIN0_Msk (0x1UL << GPIO_OUTCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_OUTCLR_PIN0_Low (0UL) /*!< Pin driver is low. */ -#define GPIO_OUTCLR_PIN0_High (1UL) /*!< Pin driver is high. */ -#define GPIO_OUTCLR_PIN0_Clear (1UL) /*!< Set pin driver low. */ - -/* Register: GPIO_IN */ -/* Description: Read GPIO port. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_IN_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_IN_PIN31_Msk (0x1UL << GPIO_IN_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_IN_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_IN_PIN30_Msk (0x1UL << GPIO_IN_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_IN_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_IN_PIN29_Msk (0x1UL << GPIO_IN_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_IN_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_IN_PIN28_Msk (0x1UL << GPIO_IN_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_IN_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_IN_PIN27_Msk (0x1UL << GPIO_IN_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_IN_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_IN_PIN26_Msk (0x1UL << GPIO_IN_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_IN_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_IN_PIN25_Msk (0x1UL << GPIO_IN_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_IN_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_IN_PIN24_Msk (0x1UL << GPIO_IN_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_IN_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_IN_PIN23_Msk (0x1UL << GPIO_IN_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_IN_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_IN_PIN22_Msk (0x1UL << GPIO_IN_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_IN_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_IN_PIN21_Msk (0x1UL << GPIO_IN_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_IN_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_IN_PIN20_Msk (0x1UL << GPIO_IN_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_IN_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_IN_PIN19_Msk (0x1UL << GPIO_IN_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_IN_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_IN_PIN18_Msk (0x1UL << GPIO_IN_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_IN_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_IN_PIN17_Msk (0x1UL << GPIO_IN_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_IN_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_IN_PIN16_Msk (0x1UL << GPIO_IN_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_IN_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_IN_PIN15_Msk (0x1UL << GPIO_IN_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_IN_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_IN_PIN14_Msk (0x1UL << GPIO_IN_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_IN_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_IN_PIN13_Msk (0x1UL << GPIO_IN_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_IN_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_IN_PIN12_Msk (0x1UL << GPIO_IN_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_IN_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_IN_PIN11_Msk (0x1UL << GPIO_IN_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_IN_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_IN_PIN10_Msk (0x1UL << GPIO_IN_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_IN_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_IN_PIN9_Msk (0x1UL << GPIO_IN_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_IN_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_IN_PIN8_Msk (0x1UL << GPIO_IN_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_IN_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_IN_PIN7_Msk (0x1UL << GPIO_IN_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_IN_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_IN_PIN6_Msk (0x1UL << GPIO_IN_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_IN_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_IN_PIN5_Msk (0x1UL << GPIO_IN_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_IN_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_IN_PIN4_Msk (0x1UL << GPIO_IN_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_IN_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_IN_PIN3_Msk (0x1UL << GPIO_IN_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_IN_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_IN_PIN2_Msk (0x1UL << GPIO_IN_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_IN_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_IN_PIN1_Msk (0x1UL << GPIO_IN_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_IN_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_IN_PIN0_Msk (0x1UL << GPIO_IN_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low. */ -#define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */ - -/* Register: GPIO_DIR */ -/* Description: Direction of GPIO pins. */ - -/* Bit 31 : Pin 31. */ -#define GPIO_DIR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_DIR_PIN31_Msk (0x1UL << GPIO_DIR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN31_Output (1UL) /*!< Pin set as output. */ - -/* Bit 30 : Pin 30. */ -#define GPIO_DIR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_DIR_PIN30_Msk (0x1UL << GPIO_DIR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN30_Output (1UL) /*!< Pin set as output. */ - -/* Bit 29 : Pin 29. */ -#define GPIO_DIR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_DIR_PIN29_Msk (0x1UL << GPIO_DIR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN29_Output (1UL) /*!< Pin set as output. */ - -/* Bit 28 : Pin 28. */ -#define GPIO_DIR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_DIR_PIN28_Msk (0x1UL << GPIO_DIR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN28_Output (1UL) /*!< Pin set as output. */ - -/* Bit 27 : Pin 27. */ -#define GPIO_DIR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_DIR_PIN27_Msk (0x1UL << GPIO_DIR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN27_Output (1UL) /*!< Pin set as output. */ - -/* Bit 26 : Pin 26. */ -#define GPIO_DIR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_DIR_PIN26_Msk (0x1UL << GPIO_DIR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN26_Output (1UL) /*!< Pin set as output. */ - -/* Bit 25 : Pin 25. */ -#define GPIO_DIR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_DIR_PIN25_Msk (0x1UL << GPIO_DIR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN25_Output (1UL) /*!< Pin set as output. */ - -/* Bit 24 : Pin 24. */ -#define GPIO_DIR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_DIR_PIN24_Msk (0x1UL << GPIO_DIR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN24_Output (1UL) /*!< Pin set as output. */ - -/* Bit 23 : Pin 23. */ -#define GPIO_DIR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_DIR_PIN23_Msk (0x1UL << GPIO_DIR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN23_Output (1UL) /*!< Pin set as output. */ - -/* Bit 22 : Pin 22. */ -#define GPIO_DIR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_DIR_PIN22_Msk (0x1UL << GPIO_DIR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN22_Output (1UL) /*!< Pin set as output. */ - -/* Bit 21 : Pin 21. */ -#define GPIO_DIR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_DIR_PIN21_Msk (0x1UL << GPIO_DIR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN21_Output (1UL) /*!< Pin set as output. */ - -/* Bit 20 : Pin 20. */ -#define GPIO_DIR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_DIR_PIN20_Msk (0x1UL << GPIO_DIR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN20_Output (1UL) /*!< Pin set as output. */ - -/* Bit 19 : Pin 19. */ -#define GPIO_DIR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_DIR_PIN19_Msk (0x1UL << GPIO_DIR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN19_Output (1UL) /*!< Pin set as output. */ - -/* Bit 18 : Pin 18. */ -#define GPIO_DIR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_DIR_PIN18_Msk (0x1UL << GPIO_DIR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN18_Output (1UL) /*!< Pin set as output. */ - -/* Bit 17 : Pin 17. */ -#define GPIO_DIR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_DIR_PIN17_Msk (0x1UL << GPIO_DIR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN17_Output (1UL) /*!< Pin set as output. */ - -/* Bit 16 : Pin 16. */ -#define GPIO_DIR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_DIR_PIN16_Msk (0x1UL << GPIO_DIR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN16_Output (1UL) /*!< Pin set as output. */ - -/* Bit 15 : Pin 15. */ -#define GPIO_DIR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_DIR_PIN15_Msk (0x1UL << GPIO_DIR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN15_Output (1UL) /*!< Pin set as output. */ - -/* Bit 14 : Pin 14. */ -#define GPIO_DIR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_DIR_PIN14_Msk (0x1UL << GPIO_DIR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN14_Output (1UL) /*!< Pin set as output. */ - -/* Bit 13 : Pin 13. */ -#define GPIO_DIR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_DIR_PIN13_Msk (0x1UL << GPIO_DIR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN13_Output (1UL) /*!< Pin set as output. */ - -/* Bit 12 : Pin 12. */ -#define GPIO_DIR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_DIR_PIN12_Msk (0x1UL << GPIO_DIR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN12_Output (1UL) /*!< Pin set as output. */ - -/* Bit 11 : Pin 11. */ -#define GPIO_DIR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_DIR_PIN11_Msk (0x1UL << GPIO_DIR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN11_Output (1UL) /*!< Pin set as output. */ - -/* Bit 10 : Pin 10. */ -#define GPIO_DIR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_DIR_PIN10_Msk (0x1UL << GPIO_DIR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN10_Output (1UL) /*!< Pin set as output. */ - -/* Bit 9 : Pin 9. */ -#define GPIO_DIR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_DIR_PIN9_Msk (0x1UL << GPIO_DIR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN9_Output (1UL) /*!< Pin set as output. */ - -/* Bit 8 : Pin 8. */ -#define GPIO_DIR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_DIR_PIN8_Msk (0x1UL << GPIO_DIR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN8_Output (1UL) /*!< Pin set as output. */ - -/* Bit 7 : Pin 7. */ -#define GPIO_DIR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_DIR_PIN7_Msk (0x1UL << GPIO_DIR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN7_Output (1UL) /*!< Pin set as output. */ - -/* Bit 6 : Pin 6. */ -#define GPIO_DIR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_DIR_PIN6_Msk (0x1UL << GPIO_DIR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN6_Output (1UL) /*!< Pin set as output. */ - -/* Bit 5 : Pin 5. */ -#define GPIO_DIR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_DIR_PIN5_Msk (0x1UL << GPIO_DIR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN5_Output (1UL) /*!< Pin set as output. */ - -/* Bit 4 : Pin 4. */ -#define GPIO_DIR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_DIR_PIN4_Msk (0x1UL << GPIO_DIR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN4_Output (1UL) /*!< Pin set as output. */ - -/* Bit 3 : Pin 3. */ -#define GPIO_DIR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_DIR_PIN3_Msk (0x1UL << GPIO_DIR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN3_Output (1UL) /*!< Pin set as output. */ - -/* Bit 2 : Pin 2. */ -#define GPIO_DIR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_DIR_PIN2_Msk (0x1UL << GPIO_DIR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN2_Output (1UL) /*!< Pin set as output. */ - -/* Bit 1 : Pin 1. */ -#define GPIO_DIR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_DIR_PIN1_Msk (0x1UL << GPIO_DIR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN1_Output (1UL) /*!< Pin set as output. */ - -/* Bit 0 : Pin 0. */ -#define GPIO_DIR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_DIR_PIN0_Msk (0x1UL << GPIO_DIR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIR_PIN0_Output (1UL) /*!< Pin set as output. */ - -/* Register: GPIO_DIRSET */ -/* Description: DIR set register. */ - -/* Bit 31 : Set as output pin 31. */ -#define GPIO_DIRSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_DIRSET_PIN31_Msk (0x1UL << GPIO_DIRSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_DIRSET_PIN31_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN31_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN31_Set (1UL) /*!< Set pin as output. */ - -/* Bit 30 : Set as output pin 30. */ -#define GPIO_DIRSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_DIRSET_PIN30_Msk (0x1UL << GPIO_DIRSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_DIRSET_PIN30_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN30_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN30_Set (1UL) /*!< Set pin as output. */ - -/* Bit 29 : Set as output pin 29. */ -#define GPIO_DIRSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_DIRSET_PIN29_Msk (0x1UL << GPIO_DIRSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_DIRSET_PIN29_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN29_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN29_Set (1UL) /*!< Set pin as output. */ - -/* Bit 28 : Set as output pin 28. */ -#define GPIO_DIRSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_DIRSET_PIN28_Msk (0x1UL << GPIO_DIRSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_DIRSET_PIN28_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN28_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN28_Set (1UL) /*!< Set pin as output. */ - -/* Bit 27 : Set as output pin 27. */ -#define GPIO_DIRSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_DIRSET_PIN27_Msk (0x1UL << GPIO_DIRSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_DIRSET_PIN27_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN27_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN27_Set (1UL) /*!< Set pin as output. */ - -/* Bit 26 : Set as output pin 26. */ -#define GPIO_DIRSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_DIRSET_PIN26_Msk (0x1UL << GPIO_DIRSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_DIRSET_PIN26_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN26_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN26_Set (1UL) /*!< Set pin as output. */ - -/* Bit 25 : Set as output pin 25. */ -#define GPIO_DIRSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_DIRSET_PIN25_Msk (0x1UL << GPIO_DIRSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_DIRSET_PIN25_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN25_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN25_Set (1UL) /*!< Set pin as output. */ - -/* Bit 24 : Set as output pin 24. */ -#define GPIO_DIRSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_DIRSET_PIN24_Msk (0x1UL << GPIO_DIRSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_DIRSET_PIN24_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN24_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN24_Set (1UL) /*!< Set pin as output. */ - -/* Bit 23 : Set as output pin 23. */ -#define GPIO_DIRSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_DIRSET_PIN23_Msk (0x1UL << GPIO_DIRSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_DIRSET_PIN23_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN23_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN23_Set (1UL) /*!< Set pin as output. */ - -/* Bit 22 : Set as output pin 22. */ -#define GPIO_DIRSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_DIRSET_PIN22_Msk (0x1UL << GPIO_DIRSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_DIRSET_PIN22_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN22_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN22_Set (1UL) /*!< Set pin as output. */ - -/* Bit 21 : Set as output pin 21. */ -#define GPIO_DIRSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_DIRSET_PIN21_Msk (0x1UL << GPIO_DIRSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_DIRSET_PIN21_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN21_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN21_Set (1UL) /*!< Set pin as output. */ - -/* Bit 20 : Set as output pin 20. */ -#define GPIO_DIRSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_DIRSET_PIN20_Msk (0x1UL << GPIO_DIRSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_DIRSET_PIN20_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN20_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN20_Set (1UL) /*!< Set pin as output. */ - -/* Bit 19 : Set as output pin 19. */ -#define GPIO_DIRSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_DIRSET_PIN19_Msk (0x1UL << GPIO_DIRSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_DIRSET_PIN19_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN19_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN19_Set (1UL) /*!< Set pin as output. */ - -/* Bit 18 : Set as output pin 18. */ -#define GPIO_DIRSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_DIRSET_PIN18_Msk (0x1UL << GPIO_DIRSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_DIRSET_PIN18_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN18_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN18_Set (1UL) /*!< Set pin as output. */ - -/* Bit 17 : Set as output pin 17. */ -#define GPIO_DIRSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_DIRSET_PIN17_Msk (0x1UL << GPIO_DIRSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_DIRSET_PIN17_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN17_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN17_Set (1UL) /*!< Set pin as output. */ - -/* Bit 16 : Set as output pin 16. */ -#define GPIO_DIRSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_DIRSET_PIN16_Msk (0x1UL << GPIO_DIRSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_DIRSET_PIN16_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN16_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN16_Set (1UL) /*!< Set pin as output. */ - -/* Bit 15 : Set as output pin 15. */ -#define GPIO_DIRSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_DIRSET_PIN15_Msk (0x1UL << GPIO_DIRSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_DIRSET_PIN15_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN15_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN15_Set (1UL) /*!< Set pin as output. */ - -/* Bit 14 : Set as output pin 14. */ -#define GPIO_DIRSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_DIRSET_PIN14_Msk (0x1UL << GPIO_DIRSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_DIRSET_PIN14_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN14_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN14_Set (1UL) /*!< Set pin as output. */ - -/* Bit 13 : Set as output pin 13. */ -#define GPIO_DIRSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_DIRSET_PIN13_Msk (0x1UL << GPIO_DIRSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_DIRSET_PIN13_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN13_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN13_Set (1UL) /*!< Set pin as output. */ - -/* Bit 12 : Set as output pin 12. */ -#define GPIO_DIRSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_DIRSET_PIN12_Msk (0x1UL << GPIO_DIRSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_DIRSET_PIN12_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN12_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN12_Set (1UL) /*!< Set pin as output. */ - -/* Bit 11 : Set as output pin 11. */ -#define GPIO_DIRSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_DIRSET_PIN11_Msk (0x1UL << GPIO_DIRSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_DIRSET_PIN11_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN11_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN11_Set (1UL) /*!< Set pin as output. */ - -/* Bit 10 : Set as output pin 10. */ -#define GPIO_DIRSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_DIRSET_PIN10_Msk (0x1UL << GPIO_DIRSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_DIRSET_PIN10_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN10_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN10_Set (1UL) /*!< Set pin as output. */ - -/* Bit 9 : Set as output pin 9. */ -#define GPIO_DIRSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_DIRSET_PIN9_Msk (0x1UL << GPIO_DIRSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_DIRSET_PIN9_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN9_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN9_Set (1UL) /*!< Set pin as output. */ - -/* Bit 8 : Set as output pin 8. */ -#define GPIO_DIRSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_DIRSET_PIN8_Msk (0x1UL << GPIO_DIRSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_DIRSET_PIN8_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN8_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN8_Set (1UL) /*!< Set pin as output. */ - -/* Bit 7 : Set as output pin 7. */ -#define GPIO_DIRSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_DIRSET_PIN7_Msk (0x1UL << GPIO_DIRSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_DIRSET_PIN7_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN7_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN7_Set (1UL) /*!< Set pin as output. */ - -/* Bit 6 : Set as output pin 6. */ -#define GPIO_DIRSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_DIRSET_PIN6_Msk (0x1UL << GPIO_DIRSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_DIRSET_PIN6_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN6_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN6_Set (1UL) /*!< Set pin as output. */ - -/* Bit 5 : Set as output pin 5. */ -#define GPIO_DIRSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_DIRSET_PIN5_Msk (0x1UL << GPIO_DIRSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_DIRSET_PIN5_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN5_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN5_Set (1UL) /*!< Set pin as output. */ - -/* Bit 4 : Set as output pin 4. */ -#define GPIO_DIRSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_DIRSET_PIN4_Msk (0x1UL << GPIO_DIRSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_DIRSET_PIN4_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN4_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN4_Set (1UL) /*!< Set pin as output. */ - -/* Bit 3 : Set as output pin 3. */ -#define GPIO_DIRSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_DIRSET_PIN3_Msk (0x1UL << GPIO_DIRSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_DIRSET_PIN3_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN3_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN3_Set (1UL) /*!< Set pin as output. */ - -/* Bit 2 : Set as output pin 2. */ -#define GPIO_DIRSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_DIRSET_PIN2_Msk (0x1UL << GPIO_DIRSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_DIRSET_PIN2_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN2_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN2_Set (1UL) /*!< Set pin as output. */ - -/* Bit 1 : Set as output pin 1. */ -#define GPIO_DIRSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_DIRSET_PIN1_Msk (0x1UL << GPIO_DIRSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_DIRSET_PIN1_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN1_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN1_Set (1UL) /*!< Set pin as output. */ - -/* Bit 0 : Set as output pin 0. */ -#define GPIO_DIRSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_DIRSET_PIN0_Msk (0x1UL << GPIO_DIRSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_DIRSET_PIN0_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRSET_PIN0_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRSET_PIN0_Set (1UL) /*!< Set pin as output. */ - -/* Register: GPIO_DIRCLR */ -/* Description: DIR clear register. */ - -/* Bit 31 : Set as input pin 31. */ -#define GPIO_DIRCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ -#define GPIO_DIRCLR_PIN31_Msk (0x1UL << GPIO_DIRCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ -#define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN31_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 30 : Set as input pin 30. */ -#define GPIO_DIRCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ -#define GPIO_DIRCLR_PIN30_Msk (0x1UL << GPIO_DIRCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ -#define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN30_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 29 : Set as input pin 29. */ -#define GPIO_DIRCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ -#define GPIO_DIRCLR_PIN29_Msk (0x1UL << GPIO_DIRCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ -#define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN29_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 28 : Set as input pin 28. */ -#define GPIO_DIRCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ -#define GPIO_DIRCLR_PIN28_Msk (0x1UL << GPIO_DIRCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ -#define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN28_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 27 : Set as input pin 27. */ -#define GPIO_DIRCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ -#define GPIO_DIRCLR_PIN27_Msk (0x1UL << GPIO_DIRCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ -#define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN27_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 26 : Set as input pin 26. */ -#define GPIO_DIRCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ -#define GPIO_DIRCLR_PIN26_Msk (0x1UL << GPIO_DIRCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ -#define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN26_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 25 : Set as input pin 25. */ -#define GPIO_DIRCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ -#define GPIO_DIRCLR_PIN25_Msk (0x1UL << GPIO_DIRCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ -#define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN25_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 24 : Set as input pin 24. */ -#define GPIO_DIRCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ -#define GPIO_DIRCLR_PIN24_Msk (0x1UL << GPIO_DIRCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ -#define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN24_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 23 : Set as input pin 23. */ -#define GPIO_DIRCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ -#define GPIO_DIRCLR_PIN23_Msk (0x1UL << GPIO_DIRCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ -#define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN23_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 22 : Set as input pin 22. */ -#define GPIO_DIRCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ -#define GPIO_DIRCLR_PIN22_Msk (0x1UL << GPIO_DIRCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ -#define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN22_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 21 : Set as input pin 21. */ -#define GPIO_DIRCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ -#define GPIO_DIRCLR_PIN21_Msk (0x1UL << GPIO_DIRCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ -#define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN21_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 20 : Set as input pin 20. */ -#define GPIO_DIRCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ -#define GPIO_DIRCLR_PIN20_Msk (0x1UL << GPIO_DIRCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ -#define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN20_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 19 : Set as input pin 19. */ -#define GPIO_DIRCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ -#define GPIO_DIRCLR_PIN19_Msk (0x1UL << GPIO_DIRCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ -#define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN19_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 18 : Set as input pin 18. */ -#define GPIO_DIRCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ -#define GPIO_DIRCLR_PIN18_Msk (0x1UL << GPIO_DIRCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ -#define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN18_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 17 : Set as input pin 17. */ -#define GPIO_DIRCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ -#define GPIO_DIRCLR_PIN17_Msk (0x1UL << GPIO_DIRCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ -#define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN17_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 16 : Set as input pin 16. */ -#define GPIO_DIRCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ -#define GPIO_DIRCLR_PIN16_Msk (0x1UL << GPIO_DIRCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ -#define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN16_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 15 : Set as input pin 15. */ -#define GPIO_DIRCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ -#define GPIO_DIRCLR_PIN15_Msk (0x1UL << GPIO_DIRCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ -#define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN15_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 14 : Set as input pin 14. */ -#define GPIO_DIRCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ -#define GPIO_DIRCLR_PIN14_Msk (0x1UL << GPIO_DIRCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ -#define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN14_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 13 : Set as input pin 13. */ -#define GPIO_DIRCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ -#define GPIO_DIRCLR_PIN13_Msk (0x1UL << GPIO_DIRCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ -#define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN13_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 12 : Set as input pin 12. */ -#define GPIO_DIRCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ -#define GPIO_DIRCLR_PIN12_Msk (0x1UL << GPIO_DIRCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ -#define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN12_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 11 : Set as input pin 11. */ -#define GPIO_DIRCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ -#define GPIO_DIRCLR_PIN11_Msk (0x1UL << GPIO_DIRCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ -#define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN11_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 10 : Set as input pin 10. */ -#define GPIO_DIRCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ -#define GPIO_DIRCLR_PIN10_Msk (0x1UL << GPIO_DIRCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ -#define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN10_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 9 : Set as input pin 9. */ -#define GPIO_DIRCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ -#define GPIO_DIRCLR_PIN9_Msk (0x1UL << GPIO_DIRCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ -#define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN9_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 8 : Set as input pin 8. */ -#define GPIO_DIRCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ -#define GPIO_DIRCLR_PIN8_Msk (0x1UL << GPIO_DIRCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ -#define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN8_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 7 : Set as input pin 7. */ -#define GPIO_DIRCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ -#define GPIO_DIRCLR_PIN7_Msk (0x1UL << GPIO_DIRCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ -#define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN7_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 6 : Set as input pin 6. */ -#define GPIO_DIRCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ -#define GPIO_DIRCLR_PIN6_Msk (0x1UL << GPIO_DIRCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ -#define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN6_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 5 : Set as input pin 5. */ -#define GPIO_DIRCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ -#define GPIO_DIRCLR_PIN5_Msk (0x1UL << GPIO_DIRCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ -#define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN5_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 4 : Set as input pin 4. */ -#define GPIO_DIRCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ -#define GPIO_DIRCLR_PIN4_Msk (0x1UL << GPIO_DIRCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ -#define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN4_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 3 : Set as input pin 3. */ -#define GPIO_DIRCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ -#define GPIO_DIRCLR_PIN3_Msk (0x1UL << GPIO_DIRCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ -#define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN3_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 2 : Set as input pin 2. */ -#define GPIO_DIRCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ -#define GPIO_DIRCLR_PIN2_Msk (0x1UL << GPIO_DIRCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ -#define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN2_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 1 : Set as input pin 1. */ -#define GPIO_DIRCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ -#define GPIO_DIRCLR_PIN1_Msk (0x1UL << GPIO_DIRCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ -#define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN1_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Set pin as input. */ - -/* Bit 0 : Set as input pin 0. */ -#define GPIO_DIRCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ -#define GPIO_DIRCLR_PIN0_Msk (0x1UL << GPIO_DIRCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ -#define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Pin set as input. */ -#define GPIO_DIRCLR_PIN0_Output (1UL) /*!< Pin set as output. */ -#define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Set pin as input. */ - -/* Register: GPIO_PIN_CNF */ -/* Description: Configuration of GPIO pins. */ - -/* Bits 17..16 : Pin sensing mechanism. */ -#define GPIO_PIN_CNF_SENSE_Pos (16UL) /*!< Position of SENSE field. */ -#define GPIO_PIN_CNF_SENSE_Msk (0x3UL << GPIO_PIN_CNF_SENSE_Pos) /*!< Bit mask of SENSE field. */ -#define GPIO_PIN_CNF_SENSE_Disabled (0x00UL) /*!< Disabled. */ -#define GPIO_PIN_CNF_SENSE_High (0x02UL) /*!< Wakeup on high level. */ -#define GPIO_PIN_CNF_SENSE_Low (0x03UL) /*!< Wakeup on low level. */ - -/* Bits 10..8 : Drive configuration. */ -#define GPIO_PIN_CNF_DRIVE_Pos (8UL) /*!< Position of DRIVE field. */ -#define GPIO_PIN_CNF_DRIVE_Msk (0x7UL << GPIO_PIN_CNF_DRIVE_Pos) /*!< Bit mask of DRIVE field. */ -#define GPIO_PIN_CNF_DRIVE_S0S1 (0x00UL) /*!< Standard '0', Standard '1'. */ -#define GPIO_PIN_CNF_DRIVE_H0S1 (0x01UL) /*!< High '0', Standard '1'. */ -#define GPIO_PIN_CNF_DRIVE_S0H1 (0x02UL) /*!< Standard '0', High '1'. */ -#define GPIO_PIN_CNF_DRIVE_H0H1 (0x03UL) /*!< High '0', High '1'. */ -#define GPIO_PIN_CNF_DRIVE_D0S1 (0x04UL) /*!< Disconnected '0', Standard '1'. */ -#define GPIO_PIN_CNF_DRIVE_D0H1 (0x05UL) /*!< Disconnected '0', High '1'. */ -#define GPIO_PIN_CNF_DRIVE_S0D1 (0x06UL) /*!< Standard '0', Disconnected '1'. */ -#define GPIO_PIN_CNF_DRIVE_H0D1 (0x07UL) /*!< High '0', Disconnected '1'. */ - -/* Bits 3..2 : Pull-up or -down configuration. */ -#define GPIO_PIN_CNF_PULL_Pos (2UL) /*!< Position of PULL field. */ -#define GPIO_PIN_CNF_PULL_Msk (0x3UL << GPIO_PIN_CNF_PULL_Pos) /*!< Bit mask of PULL field. */ -#define GPIO_PIN_CNF_PULL_Disabled (0x00UL) /*!< No pull. */ -#define GPIO_PIN_CNF_PULL_Pulldown (0x01UL) /*!< Pulldown on pin. */ -#define GPIO_PIN_CNF_PULL_Pullup (0x03UL) /*!< Pullup on pin. */ - -/* Bit 1 : Connect or disconnect input path. */ -#define GPIO_PIN_CNF_INPUT_Pos (1UL) /*!< Position of INPUT field. */ -#define GPIO_PIN_CNF_INPUT_Msk (0x1UL << GPIO_PIN_CNF_INPUT_Pos) /*!< Bit mask of INPUT field. */ -#define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input pin. */ -#define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input pin. */ - -/* Bit 0 : Pin direction. */ -#define GPIO_PIN_CNF_DIR_Pos (0UL) /*!< Position of DIR field. */ -#define GPIO_PIN_CNF_DIR_Msk (0x1UL << GPIO_PIN_CNF_DIR_Pos) /*!< Bit mask of DIR field. */ -#define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin. */ -#define GPIO_PIN_CNF_DIR_Output (1UL) /*!< Configure pin as an output pin. */ - - -/* Peripheral: GPIOTE */ -/* Description: GPIO tasks and events. */ - -/* Register: GPIOTE_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 31 : Enable interrupt on PORT event. */ -#define GPIOTE_INTENSET_PORT_Pos (31UL) /*!< Position of PORT field. */ -#define GPIOTE_INTENSET_PORT_Msk (0x1UL << GPIOTE_INTENSET_PORT_Pos) /*!< Bit mask of PORT field. */ -#define GPIOTE_INTENSET_PORT_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_PORT_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_PORT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 3 : Enable interrupt on IN[3] event. */ -#define GPIOTE_INTENSET_IN3_Pos (3UL) /*!< Position of IN3 field. */ -#define GPIOTE_INTENSET_IN3_Msk (0x1UL << GPIOTE_INTENSET_IN3_Pos) /*!< Bit mask of IN3 field. */ -#define GPIOTE_INTENSET_IN3_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN3_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN3_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on IN[2] event. */ -#define GPIOTE_INTENSET_IN2_Pos (2UL) /*!< Position of IN2 field. */ -#define GPIOTE_INTENSET_IN2_Msk (0x1UL << GPIOTE_INTENSET_IN2_Pos) /*!< Bit mask of IN2 field. */ -#define GPIOTE_INTENSET_IN2_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN2_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN2_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on IN[1] event. */ -#define GPIOTE_INTENSET_IN1_Pos (1UL) /*!< Position of IN1 field. */ -#define GPIOTE_INTENSET_IN1_Msk (0x1UL << GPIOTE_INTENSET_IN1_Pos) /*!< Bit mask of IN1 field. */ -#define GPIOTE_INTENSET_IN1_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN1_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN1_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on IN[0] event. */ -#define GPIOTE_INTENSET_IN0_Pos (0UL) /*!< Position of IN0 field. */ -#define GPIOTE_INTENSET_IN0_Msk (0x1UL << GPIOTE_INTENSET_IN0_Pos) /*!< Bit mask of IN0 field. */ -#define GPIOTE_INTENSET_IN0_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENSET_IN0_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENSET_IN0_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: GPIOTE_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 31 : Disable interrupt on PORT event. */ -#define GPIOTE_INTENCLR_PORT_Pos (31UL) /*!< Position of PORT field. */ -#define GPIOTE_INTENCLR_PORT_Msk (0x1UL << GPIOTE_INTENCLR_PORT_Pos) /*!< Bit mask of PORT field. */ -#define GPIOTE_INTENCLR_PORT_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_PORT_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_PORT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 3 : Disable interrupt on IN[3] event. */ -#define GPIOTE_INTENCLR_IN3_Pos (3UL) /*!< Position of IN3 field. */ -#define GPIOTE_INTENCLR_IN3_Msk (0x1UL << GPIOTE_INTENCLR_IN3_Pos) /*!< Bit mask of IN3 field. */ -#define GPIOTE_INTENCLR_IN3_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN3_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN3_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on IN[2] event. */ -#define GPIOTE_INTENCLR_IN2_Pos (2UL) /*!< Position of IN2 field. */ -#define GPIOTE_INTENCLR_IN2_Msk (0x1UL << GPIOTE_INTENCLR_IN2_Pos) /*!< Bit mask of IN2 field. */ -#define GPIOTE_INTENCLR_IN2_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN2_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN2_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on IN[1] event. */ -#define GPIOTE_INTENCLR_IN1_Pos (1UL) /*!< Position of IN1 field. */ -#define GPIOTE_INTENCLR_IN1_Msk (0x1UL << GPIOTE_INTENCLR_IN1_Pos) /*!< Bit mask of IN1 field. */ -#define GPIOTE_INTENCLR_IN1_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN1_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN1_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on IN[0] event. */ -#define GPIOTE_INTENCLR_IN0_Pos (0UL) /*!< Position of IN0 field. */ -#define GPIOTE_INTENCLR_IN0_Msk (0x1UL << GPIOTE_INTENCLR_IN0_Pos) /*!< Bit mask of IN0 field. */ -#define GPIOTE_INTENCLR_IN0_Disabled (0UL) /*!< Interrupt disabled. */ -#define GPIOTE_INTENCLR_IN0_Enabled (1UL) /*!< Interrupt enabled. */ -#define GPIOTE_INTENCLR_IN0_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: GPIOTE_CONFIG */ -/* Description: Channel configuration registers. */ - -/* Bit 20 : Initial value of the output when the GPIOTE channel is configured as a Task. */ -#define GPIOTE_CONFIG_OUTINIT_Pos (20UL) /*!< Position of OUTINIT field. */ -#define GPIOTE_CONFIG_OUTINIT_Msk (0x1UL << GPIOTE_CONFIG_OUTINIT_Pos) /*!< Bit mask of OUTINIT field. */ -#define GPIOTE_CONFIG_OUTINIT_Low (0UL) /*!< Initial low output when in task mode. */ -#define GPIOTE_CONFIG_OUTINIT_High (1UL) /*!< Initial high output when in task mode. */ - -/* Bits 17..16 : Effects on output when in Task mode, or events on input that generates an event. */ -#define GPIOTE_CONFIG_POLARITY_Pos (16UL) /*!< Position of POLARITY field. */ -#define GPIOTE_CONFIG_POLARITY_Msk (0x3UL << GPIOTE_CONFIG_POLARITY_Pos) /*!< Bit mask of POLARITY field. */ -#define GPIOTE_CONFIG_POLARITY_None (0x00UL) /*!< No task or event. */ -#define GPIOTE_CONFIG_POLARITY_LoToHi (0x01UL) /*!< Low to high. */ -#define GPIOTE_CONFIG_POLARITY_HiToLo (0x02UL) /*!< High to low. */ -#define GPIOTE_CONFIG_POLARITY_Toggle (0x03UL) /*!< Toggle. */ - -/* Bits 12..8 : Pin select. */ -#define GPIOTE_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ -#define GPIOTE_CONFIG_PSEL_Msk (0x1FUL << GPIOTE_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ - -/* Bits 1..0 : Mode */ -#define GPIOTE_CONFIG_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define GPIOTE_CONFIG_MODE_Msk (0x3UL << GPIOTE_CONFIG_MODE_Pos) /*!< Bit mask of MODE field. */ -#define GPIOTE_CONFIG_MODE_Disabled (0x00UL) /*!< Disabled. */ -#define GPIOTE_CONFIG_MODE_Event (0x01UL) /*!< Channel configure in event mode. */ -#define GPIOTE_CONFIG_MODE_Task (0x03UL) /*!< Channel configure in task mode. */ - -/* Register: GPIOTE_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define GPIOTE_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define GPIOTE_POWER_POWER_Msk (0x1UL << GPIOTE_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define GPIOTE_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define GPIOTE_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: LPCOMP */ -/* Description: Low power comparator. */ - -/* Register: LPCOMP_SHORTS */ -/* Description: Shortcuts for the LPCOMP. */ - -/* Bit 4 : Shortcut between CROSS event and STOP task. */ -#define LPCOMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */ -#define LPCOMP_SHORTS_CROSS_STOP_Msk (0x1UL << LPCOMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */ -#define LPCOMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between UP event and STOP task. */ -#define LPCOMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */ -#define LPCOMP_SHORTS_UP_STOP_Msk (0x1UL << LPCOMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */ -#define LPCOMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 2 : Shortcut between DOWN event and STOP task. */ -#define LPCOMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */ -#define LPCOMP_SHORTS_DOWN_STOP_Msk (0x1UL << LPCOMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */ -#define LPCOMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 1 : Shortcut between RADY event and STOP task. */ -#define LPCOMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */ -#define LPCOMP_SHORTS_READY_STOP_Msk (0x1UL << LPCOMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */ -#define LPCOMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between READY event and SAMPLE task. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Msk (0x1UL << LPCOMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Shortcut disabled. */ -#define LPCOMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: LPCOMP_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 3 : Enable interrupt on CROSS event. */ -#define LPCOMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */ -#define LPCOMP_INTENSET_CROSS_Msk (0x1UL << LPCOMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */ -#define LPCOMP_INTENSET_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_CROSS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on UP event. */ -#define LPCOMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */ -#define LPCOMP_INTENSET_UP_Msk (0x1UL << LPCOMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */ -#define LPCOMP_INTENSET_UP_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_UP_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_UP_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on DOWN event. */ -#define LPCOMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */ -#define LPCOMP_INTENSET_DOWN_Msk (0x1UL << LPCOMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */ -#define LPCOMP_INTENSET_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_DOWN_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on READY event. */ -#define LPCOMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ -#define LPCOMP_INTENSET_READY_Msk (0x1UL << LPCOMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ -#define LPCOMP_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: LPCOMP_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 3 : Disable interrupt on CROSS event. */ -#define LPCOMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */ -#define LPCOMP_INTENCLR_CROSS_Msk (0x1UL << LPCOMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */ -#define LPCOMP_INTENCLR_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on UP event. */ -#define LPCOMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */ -#define LPCOMP_INTENCLR_UP_Msk (0x1UL << LPCOMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */ -#define LPCOMP_INTENCLR_UP_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_UP_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_UP_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on DOWN event. */ -#define LPCOMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */ -#define LPCOMP_INTENCLR_DOWN_Msk (0x1UL << LPCOMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */ -#define LPCOMP_INTENCLR_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on READY event. */ -#define LPCOMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ -#define LPCOMP_INTENCLR_READY_Msk (0x1UL << LPCOMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ -#define LPCOMP_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define LPCOMP_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define LPCOMP_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: LPCOMP_RESULT */ -/* Description: Result of last compare. */ - -/* Bit 0 : Result of last compare. Decision point SAMPLE task. */ -#define LPCOMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ -#define LPCOMP_RESULT_RESULT_Msk (0x1UL << LPCOMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ -#define LPCOMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is bellow the reference threshold. */ -#define LPCOMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */ - -/* Register: LPCOMP_ENABLE */ -/* Description: Enable the LPCOMP. */ - -/* Bits 1..0 : Enable or disable LPCOMP. */ -#define LPCOMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define LPCOMP_ENABLE_ENABLE_Msk (0x3UL << LPCOMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define LPCOMP_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled LPCOMP. */ -#define LPCOMP_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable LPCOMP. */ - -/* Register: LPCOMP_PSEL */ -/* Description: Input pin select. */ - -/* Bits 2..0 : Analog input pin select. */ -#define LPCOMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */ -#define LPCOMP_PSEL_PSEL_Msk (0x7UL << LPCOMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */ -#define LPCOMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */ -#define LPCOMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */ - -/* Register: LPCOMP_REFSEL */ -/* Description: Reference select. */ - -/* Bits 2..0 : Reference select. */ -#define LPCOMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */ -#define LPCOMP_REFSEL_REFSEL_Msk (0x7UL << LPCOMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ -#define LPCOMP_REFSEL_REFSEL_SupplyOneEighthPrescaling (0UL) /*!< Use supply with a 1/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyTwoEighthsPrescaling (1UL) /*!< Use supply with a 2/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyThreeEighthsPrescaling (2UL) /*!< Use supply with a 3/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyFourEighthsPrescaling (3UL) /*!< Use supply with a 4/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplyFiveEighthsPrescaling (4UL) /*!< Use supply with a 5/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplySixEighthsPrescaling (5UL) /*!< Use supply with a 6/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_SupplySevenEighthsPrescaling (6UL) /*!< Use supply with a 7/8 prescaler as reference. */ -#define LPCOMP_REFSEL_REFSEL_ARef (7UL) /*!< Use external analog reference as reference. */ - -/* Register: LPCOMP_EXTREFSEL */ -/* Description: External reference select. */ - -/* Bit 0 : External analog reference pin selection. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << LPCOMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use analog reference 0 as reference. */ -#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use analog reference 1 as reference. */ - -/* Register: LPCOMP_ANADETECT */ -/* Description: Analog detect configuration. */ - -/* Bits 1..0 : Analog detect configuration. */ -#define LPCOMP_ANADETECT_ANADETECT_Pos (0UL) /*!< Position of ANADETECT field. */ -#define LPCOMP_ANADETECT_ANADETECT_Msk (0x3UL << LPCOMP_ANADETECT_ANADETECT_Pos) /*!< Bit mask of ANADETECT field. */ -#define LPCOMP_ANADETECT_ANADETECT_Cross (0UL) /*!< Generate ANADETEC on crossing, both upwards and downwards crossing. */ -#define LPCOMP_ANADETECT_ANADETECT_Up (1UL) /*!< Generate ANADETEC on upwards crossing only. */ -#define LPCOMP_ANADETECT_ANADETECT_Down (2UL) /*!< Generate ANADETEC on downwards crossing only. */ - -/* Register: LPCOMP_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define LPCOMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define LPCOMP_POWER_POWER_Msk (0x1UL << LPCOMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define LPCOMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define LPCOMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: MPU */ -/* Description: Memory Protection Unit. */ - -/* Register: MPU_PERR0 */ -/* Description: Configuration of peripherals in mpu regions. */ - -/* Bit 31 : PPI region configuration. */ -#define MPU_PERR0_PPI_Pos (31UL) /*!< Position of PPI field. */ -#define MPU_PERR0_PPI_Msk (0x1UL << MPU_PERR0_PPI_Pos) /*!< Bit mask of PPI field. */ -#define MPU_PERR0_PPI_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_PPI_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 30 : NVMC region configuration. */ -#define MPU_PERR0_NVMC_Pos (30UL) /*!< Position of NVMC field. */ -#define MPU_PERR0_NVMC_Msk (0x1UL << MPU_PERR0_NVMC_Pos) /*!< Bit mask of NVMC field. */ -#define MPU_PERR0_NVMC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_NVMC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 19 : LPCOMP region configuration. */ -#define MPU_PERR0_LPCOMP_Pos (19UL) /*!< Position of LPCOMP field. */ -#define MPU_PERR0_LPCOMP_Msk (0x1UL << MPU_PERR0_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ -#define MPU_PERR0_LPCOMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_LPCOMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 18 : QDEC region configuration. */ -#define MPU_PERR0_QDEC_Pos (18UL) /*!< Position of QDEC field. */ -#define MPU_PERR0_QDEC_Msk (0x1UL << MPU_PERR0_QDEC_Pos) /*!< Bit mask of QDEC field. */ -#define MPU_PERR0_QDEC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_QDEC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 17 : RTC1 region configuration. */ -#define MPU_PERR0_RTC1_Pos (17UL) /*!< Position of RTC1 field. */ -#define MPU_PERR0_RTC1_Msk (0x1UL << MPU_PERR0_RTC1_Pos) /*!< Bit mask of RTC1 field. */ -#define MPU_PERR0_RTC1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RTC1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 16 : WDT region configuration. */ -#define MPU_PERR0_WDT_Pos (16UL) /*!< Position of WDT field. */ -#define MPU_PERR0_WDT_Msk (0x1UL << MPU_PERR0_WDT_Pos) /*!< Bit mask of WDT field. */ -#define MPU_PERR0_WDT_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_WDT_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 15 : CCM and AAR region configuration. */ -#define MPU_PERR0_CCM_AAR_Pos (15UL) /*!< Position of CCM_AAR field. */ -#define MPU_PERR0_CCM_AAR_Msk (0x1UL << MPU_PERR0_CCM_AAR_Pos) /*!< Bit mask of CCM_AAR field. */ -#define MPU_PERR0_CCM_AAR_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_CCM_AAR_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 14 : ECB region configuration. */ -#define MPU_PERR0_ECB_Pos (14UL) /*!< Position of ECB field. */ -#define MPU_PERR0_ECB_Msk (0x1UL << MPU_PERR0_ECB_Pos) /*!< Bit mask of ECB field. */ -#define MPU_PERR0_ECB_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_ECB_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 13 : RNG region configuration. */ -#define MPU_PERR0_RNG_Pos (13UL) /*!< Position of RNG field. */ -#define MPU_PERR0_RNG_Msk (0x1UL << MPU_PERR0_RNG_Pos) /*!< Bit mask of RNG field. */ -#define MPU_PERR0_RNG_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RNG_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 12 : TEMP region configuration. */ -#define MPU_PERR0_TEMP_Pos (12UL) /*!< Position of TEMP field. */ -#define MPU_PERR0_TEMP_Msk (0x1UL << MPU_PERR0_TEMP_Pos) /*!< Bit mask of TEMP field. */ -#define MPU_PERR0_TEMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TEMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 11 : RTC0 region configuration. */ -#define MPU_PERR0_RTC0_Pos (11UL) /*!< Position of RTC0 field. */ -#define MPU_PERR0_RTC0_Msk (0x1UL << MPU_PERR0_RTC0_Pos) /*!< Bit mask of RTC0 field. */ -#define MPU_PERR0_RTC0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RTC0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 10 : TIMER2 region configuration. */ -#define MPU_PERR0_TIMER2_Pos (10UL) /*!< Position of TIMER2 field. */ -#define MPU_PERR0_TIMER2_Msk (0x1UL << MPU_PERR0_TIMER2_Pos) /*!< Bit mask of TIMER2 field. */ -#define MPU_PERR0_TIMER2_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TIMER2_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 9 : TIMER1 region configuration. */ -#define MPU_PERR0_TIMER1_Pos (9UL) /*!< Position of TIMER1 field. */ -#define MPU_PERR0_TIMER1_Msk (0x1UL << MPU_PERR0_TIMER1_Pos) /*!< Bit mask of TIMER1 field. */ -#define MPU_PERR0_TIMER1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TIMER1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 8 : TIMER0 region configuration. */ -#define MPU_PERR0_TIMER0_Pos (8UL) /*!< Position of TIMER0 field. */ -#define MPU_PERR0_TIMER0_Msk (0x1UL << MPU_PERR0_TIMER0_Pos) /*!< Bit mask of TIMER0 field. */ -#define MPU_PERR0_TIMER0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_TIMER0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 7 : ADC region configuration. */ -#define MPU_PERR0_ADC_Pos (7UL) /*!< Position of ADC field. */ -#define MPU_PERR0_ADC_Msk (0x1UL << MPU_PERR0_ADC_Pos) /*!< Bit mask of ADC field. */ -#define MPU_PERR0_ADC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_ADC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 6 : GPIOTE region configuration. */ -#define MPU_PERR0_GPIOTE_Pos (6UL) /*!< Position of GPIOTE field. */ -#define MPU_PERR0_GPIOTE_Msk (0x1UL << MPU_PERR0_GPIOTE_Pos) /*!< Bit mask of GPIOTE field. */ -#define MPU_PERR0_GPIOTE_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_GPIOTE_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 4 : SPI1 and TWI1 region configuration. */ -#define MPU_PERR0_SPI1_TWI1_Pos (4UL) /*!< Position of SPI1_TWI1 field. */ -#define MPU_PERR0_SPI1_TWI1_Msk (0x1UL << MPU_PERR0_SPI1_TWI1_Pos) /*!< Bit mask of SPI1_TWI1 field. */ -#define MPU_PERR0_SPI1_TWI1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_SPI1_TWI1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 3 : SPI0 and TWI0 region configuration. */ -#define MPU_PERR0_SPI0_TWI0_Pos (3UL) /*!< Position of SPI0_TWI0 field. */ -#define MPU_PERR0_SPI0_TWI0_Msk (0x1UL << MPU_PERR0_SPI0_TWI0_Pos) /*!< Bit mask of SPI0_TWI0 field. */ -#define MPU_PERR0_SPI0_TWI0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_SPI0_TWI0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 2 : UART0 region configuration. */ -#define MPU_PERR0_UART0_Pos (2UL) /*!< Position of UART0 field. */ -#define MPU_PERR0_UART0_Msk (0x1UL << MPU_PERR0_UART0_Pos) /*!< Bit mask of UART0 field. */ -#define MPU_PERR0_UART0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_UART0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 1 : RADIO region configuration. */ -#define MPU_PERR0_RADIO_Pos (1UL) /*!< Position of RADIO field. */ -#define MPU_PERR0_RADIO_Msk (0x1UL << MPU_PERR0_RADIO_Pos) /*!< Bit mask of RADIO field. */ -#define MPU_PERR0_RADIO_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_RADIO_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Bit 0 : POWER_CLOCK region configuration. */ -#define MPU_PERR0_POWER_CLOCK_Pos (0UL) /*!< Position of POWER_CLOCK field. */ -#define MPU_PERR0_POWER_CLOCK_Msk (0x1UL << MPU_PERR0_POWER_CLOCK_Pos) /*!< Bit mask of POWER_CLOCK field. */ -#define MPU_PERR0_POWER_CLOCK_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ -#define MPU_PERR0_POWER_CLOCK_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ - -/* Register: MPU_PROTENSET0 */ -/* Description: Erase and write protection bit enable set register. */ - -/* Bit 31 : Protection enable for region 31. */ -#define MPU_PROTENSET0_PROTREG31_Pos (31UL) /*!< Position of PROTREG31 field. */ -#define MPU_PROTENSET0_PROTREG31_Msk (0x1UL << MPU_PROTENSET0_PROTREG31_Pos) /*!< Bit mask of PROTREG31 field. */ -#define MPU_PROTENSET0_PROTREG31_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG31_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG31_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 30 : Protection enable for region 30. */ -#define MPU_PROTENSET0_PROTREG30_Pos (30UL) /*!< Position of PROTREG30 field. */ -#define MPU_PROTENSET0_PROTREG30_Msk (0x1UL << MPU_PROTENSET0_PROTREG30_Pos) /*!< Bit mask of PROTREG30 field. */ -#define MPU_PROTENSET0_PROTREG30_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG30_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG30_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 29 : Protection enable for region 29. */ -#define MPU_PROTENSET0_PROTREG29_Pos (29UL) /*!< Position of PROTREG29 field. */ -#define MPU_PROTENSET0_PROTREG29_Msk (0x1UL << MPU_PROTENSET0_PROTREG29_Pos) /*!< Bit mask of PROTREG29 field. */ -#define MPU_PROTENSET0_PROTREG29_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG29_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG29_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 28 : Protection enable for region 28. */ -#define MPU_PROTENSET0_PROTREG28_Pos (28UL) /*!< Position of PROTREG28 field. */ -#define MPU_PROTENSET0_PROTREG28_Msk (0x1UL << MPU_PROTENSET0_PROTREG28_Pos) /*!< Bit mask of PROTREG28 field. */ -#define MPU_PROTENSET0_PROTREG28_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG28_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG28_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 27 : Protection enable for region 27. */ -#define MPU_PROTENSET0_PROTREG27_Pos (27UL) /*!< Position of PROTREG27 field. */ -#define MPU_PROTENSET0_PROTREG27_Msk (0x1UL << MPU_PROTENSET0_PROTREG27_Pos) /*!< Bit mask of PROTREG27 field. */ -#define MPU_PROTENSET0_PROTREG27_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG27_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG27_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 26 : Protection enable for region 26. */ -#define MPU_PROTENSET0_PROTREG26_Pos (26UL) /*!< Position of PROTREG26 field. */ -#define MPU_PROTENSET0_PROTREG26_Msk (0x1UL << MPU_PROTENSET0_PROTREG26_Pos) /*!< Bit mask of PROTREG26 field. */ -#define MPU_PROTENSET0_PROTREG26_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG26_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG26_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 25 : Protection enable for region 25. */ -#define MPU_PROTENSET0_PROTREG25_Pos (25UL) /*!< Position of PROTREG25 field. */ -#define MPU_PROTENSET0_PROTREG25_Msk (0x1UL << MPU_PROTENSET0_PROTREG25_Pos) /*!< Bit mask of PROTREG25 field. */ -#define MPU_PROTENSET0_PROTREG25_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG25_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG25_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 24 : Protection enable for region 24. */ -#define MPU_PROTENSET0_PROTREG24_Pos (24UL) /*!< Position of PROTREG24 field. */ -#define MPU_PROTENSET0_PROTREG24_Msk (0x1UL << MPU_PROTENSET0_PROTREG24_Pos) /*!< Bit mask of PROTREG24 field. */ -#define MPU_PROTENSET0_PROTREG24_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG24_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG24_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 23 : Protection enable for region 23. */ -#define MPU_PROTENSET0_PROTREG23_Pos (23UL) /*!< Position of PROTREG23 field. */ -#define MPU_PROTENSET0_PROTREG23_Msk (0x1UL << MPU_PROTENSET0_PROTREG23_Pos) /*!< Bit mask of PROTREG23 field. */ -#define MPU_PROTENSET0_PROTREG23_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG23_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG23_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 22 : Protection enable for region 22. */ -#define MPU_PROTENSET0_PROTREG22_Pos (22UL) /*!< Position of PROTREG22 field. */ -#define MPU_PROTENSET0_PROTREG22_Msk (0x1UL << MPU_PROTENSET0_PROTREG22_Pos) /*!< Bit mask of PROTREG22 field. */ -#define MPU_PROTENSET0_PROTREG22_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG22_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG22_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 21 : Protection enable for region 21. */ -#define MPU_PROTENSET0_PROTREG21_Pos (21UL) /*!< Position of PROTREG21 field. */ -#define MPU_PROTENSET0_PROTREG21_Msk (0x1UL << MPU_PROTENSET0_PROTREG21_Pos) /*!< Bit mask of PROTREG21 field. */ -#define MPU_PROTENSET0_PROTREG21_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG21_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG21_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 20 : Protection enable for region 20. */ -#define MPU_PROTENSET0_PROTREG20_Pos (20UL) /*!< Position of PROTREG20 field. */ -#define MPU_PROTENSET0_PROTREG20_Msk (0x1UL << MPU_PROTENSET0_PROTREG20_Pos) /*!< Bit mask of PROTREG20 field. */ -#define MPU_PROTENSET0_PROTREG20_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG20_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG20_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 19 : Protection enable for region 19. */ -#define MPU_PROTENSET0_PROTREG19_Pos (19UL) /*!< Position of PROTREG19 field. */ -#define MPU_PROTENSET0_PROTREG19_Msk (0x1UL << MPU_PROTENSET0_PROTREG19_Pos) /*!< Bit mask of PROTREG19 field. */ -#define MPU_PROTENSET0_PROTREG19_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG19_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG19_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 18 : Protection enable for region 18. */ -#define MPU_PROTENSET0_PROTREG18_Pos (18UL) /*!< Position of PROTREG18 field. */ -#define MPU_PROTENSET0_PROTREG18_Msk (0x1UL << MPU_PROTENSET0_PROTREG18_Pos) /*!< Bit mask of PROTREG18 field. */ -#define MPU_PROTENSET0_PROTREG18_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG18_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG18_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 17 : Protection enable for region 17. */ -#define MPU_PROTENSET0_PROTREG17_Pos (17UL) /*!< Position of PROTREG17 field. */ -#define MPU_PROTENSET0_PROTREG17_Msk (0x1UL << MPU_PROTENSET0_PROTREG17_Pos) /*!< Bit mask of PROTREG17 field. */ -#define MPU_PROTENSET0_PROTREG17_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG17_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG17_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 16 : Protection enable for region 16. */ -#define MPU_PROTENSET0_PROTREG16_Pos (16UL) /*!< Position of PROTREG16 field. */ -#define MPU_PROTENSET0_PROTREG16_Msk (0x1UL << MPU_PROTENSET0_PROTREG16_Pos) /*!< Bit mask of PROTREG16 field. */ -#define MPU_PROTENSET0_PROTREG16_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG16_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG16_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 15 : Protection enable for region 15. */ -#define MPU_PROTENSET0_PROTREG15_Pos (15UL) /*!< Position of PROTREG15 field. */ -#define MPU_PROTENSET0_PROTREG15_Msk (0x1UL << MPU_PROTENSET0_PROTREG15_Pos) /*!< Bit mask of PROTREG15 field. */ -#define MPU_PROTENSET0_PROTREG15_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG15_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG15_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 14 : Protection enable for region 14. */ -#define MPU_PROTENSET0_PROTREG14_Pos (14UL) /*!< Position of PROTREG14 field. */ -#define MPU_PROTENSET0_PROTREG14_Msk (0x1UL << MPU_PROTENSET0_PROTREG14_Pos) /*!< Bit mask of PROTREG14 field. */ -#define MPU_PROTENSET0_PROTREG14_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG14_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG14_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 13 : Protection enable for region 13. */ -#define MPU_PROTENSET0_PROTREG13_Pos (13UL) /*!< Position of PROTREG13 field. */ -#define MPU_PROTENSET0_PROTREG13_Msk (0x1UL << MPU_PROTENSET0_PROTREG13_Pos) /*!< Bit mask of PROTREG13 field. */ -#define MPU_PROTENSET0_PROTREG13_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG13_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG13_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 12 : Protection enable for region 12. */ -#define MPU_PROTENSET0_PROTREG12_Pos (12UL) /*!< Position of PROTREG12 field. */ -#define MPU_PROTENSET0_PROTREG12_Msk (0x1UL << MPU_PROTENSET0_PROTREG12_Pos) /*!< Bit mask of PROTREG12 field. */ -#define MPU_PROTENSET0_PROTREG12_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG12_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG12_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 11 : Protection enable for region 11. */ -#define MPU_PROTENSET0_PROTREG11_Pos (11UL) /*!< Position of PROTREG11 field. */ -#define MPU_PROTENSET0_PROTREG11_Msk (0x1UL << MPU_PROTENSET0_PROTREG11_Pos) /*!< Bit mask of PROTREG11 field. */ -#define MPU_PROTENSET0_PROTREG11_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG11_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG11_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 10 : Protection enable for region 10. */ -#define MPU_PROTENSET0_PROTREG10_Pos (10UL) /*!< Position of PROTREG10 field. */ -#define MPU_PROTENSET0_PROTREG10_Msk (0x1UL << MPU_PROTENSET0_PROTREG10_Pos) /*!< Bit mask of PROTREG10 field. */ -#define MPU_PROTENSET0_PROTREG10_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG10_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG10_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 9 : Protection enable for region 9. */ -#define MPU_PROTENSET0_PROTREG9_Pos (9UL) /*!< Position of PROTREG9 field. */ -#define MPU_PROTENSET0_PROTREG9_Msk (0x1UL << MPU_PROTENSET0_PROTREG9_Pos) /*!< Bit mask of PROTREG9 field. */ -#define MPU_PROTENSET0_PROTREG9_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG9_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG9_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 8 : Protection enable for region 8. */ -#define MPU_PROTENSET0_PROTREG8_Pos (8UL) /*!< Position of PROTREG8 field. */ -#define MPU_PROTENSET0_PROTREG8_Msk (0x1UL << MPU_PROTENSET0_PROTREG8_Pos) /*!< Bit mask of PROTREG8 field. */ -#define MPU_PROTENSET0_PROTREG8_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG8_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG8_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 7 : Protection enable for region 7. */ -#define MPU_PROTENSET0_PROTREG7_Pos (7UL) /*!< Position of PROTREG7 field. */ -#define MPU_PROTENSET0_PROTREG7_Msk (0x1UL << MPU_PROTENSET0_PROTREG7_Pos) /*!< Bit mask of PROTREG7 field. */ -#define MPU_PROTENSET0_PROTREG7_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG7_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG7_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 6 : Protection enable for region 6. */ -#define MPU_PROTENSET0_PROTREG6_Pos (6UL) /*!< Position of PROTREG6 field. */ -#define MPU_PROTENSET0_PROTREG6_Msk (0x1UL << MPU_PROTENSET0_PROTREG6_Pos) /*!< Bit mask of PROTREG6 field. */ -#define MPU_PROTENSET0_PROTREG6_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG6_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG6_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 5 : Protection enable for region 5. */ -#define MPU_PROTENSET0_PROTREG5_Pos (5UL) /*!< Position of PROTREG5 field. */ -#define MPU_PROTENSET0_PROTREG5_Msk (0x1UL << MPU_PROTENSET0_PROTREG5_Pos) /*!< Bit mask of PROTREG5 field. */ -#define MPU_PROTENSET0_PROTREG5_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG5_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG5_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 4 : Protection enable for region 4. */ -#define MPU_PROTENSET0_PROTREG4_Pos (4UL) /*!< Position of PROTREG4 field. */ -#define MPU_PROTENSET0_PROTREG4_Msk (0x1UL << MPU_PROTENSET0_PROTREG4_Pos) /*!< Bit mask of PROTREG4 field. */ -#define MPU_PROTENSET0_PROTREG4_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG4_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG4_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 3 : Protection enable for region 3. */ -#define MPU_PROTENSET0_PROTREG3_Pos (3UL) /*!< Position of PROTREG3 field. */ -#define MPU_PROTENSET0_PROTREG3_Msk (0x1UL << MPU_PROTENSET0_PROTREG3_Pos) /*!< Bit mask of PROTREG3 field. */ -#define MPU_PROTENSET0_PROTREG3_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG3_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG3_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 2 : Protection enable for region 2. */ -#define MPU_PROTENSET0_PROTREG2_Pos (2UL) /*!< Position of PROTREG2 field. */ -#define MPU_PROTENSET0_PROTREG2_Msk (0x1UL << MPU_PROTENSET0_PROTREG2_Pos) /*!< Bit mask of PROTREG2 field. */ -#define MPU_PROTENSET0_PROTREG2_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG2_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG2_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 1 : Protection enable for region 1. */ -#define MPU_PROTENSET0_PROTREG1_Pos (1UL) /*!< Position of PROTREG1 field. */ -#define MPU_PROTENSET0_PROTREG1_Msk (0x1UL << MPU_PROTENSET0_PROTREG1_Pos) /*!< Bit mask of PROTREG1 field. */ -#define MPU_PROTENSET0_PROTREG1_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG1_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG1_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 0 : Protection enable for region 0. */ -#define MPU_PROTENSET0_PROTREG0_Pos (0UL) /*!< Position of PROTREG0 field. */ -#define MPU_PROTENSET0_PROTREG0_Msk (0x1UL << MPU_PROTENSET0_PROTREG0_Pos) /*!< Bit mask of PROTREG0 field. */ -#define MPU_PROTENSET0_PROTREG0_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET0_PROTREG0_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET0_PROTREG0_Set (1UL) /*!< Enable protection on write. */ - -/* Register: MPU_PROTENSET1 */ -/* Description: Erase and write protection bit enable set register. */ - -/* Bit 31 : Protection enable for region 63. */ -#define MPU_PROTENSET1_PROTREG63_Pos (31UL) /*!< Position of PROTREG63 field. */ -#define MPU_PROTENSET1_PROTREG63_Msk (0x1UL << MPU_PROTENSET1_PROTREG63_Pos) /*!< Bit mask of PROTREG63 field. */ -#define MPU_PROTENSET1_PROTREG63_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG63_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG63_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 30 : Protection enable for region 62. */ -#define MPU_PROTENSET1_PROTREG62_Pos (30UL) /*!< Position of PROTREG62 field. */ -#define MPU_PROTENSET1_PROTREG62_Msk (0x1UL << MPU_PROTENSET1_PROTREG62_Pos) /*!< Bit mask of PROTREG62 field. */ -#define MPU_PROTENSET1_PROTREG62_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG62_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG62_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 29 : Protection enable for region 61. */ -#define MPU_PROTENSET1_PROTREG61_Pos (29UL) /*!< Position of PROTREG61 field. */ -#define MPU_PROTENSET1_PROTREG61_Msk (0x1UL << MPU_PROTENSET1_PROTREG61_Pos) /*!< Bit mask of PROTREG61 field. */ -#define MPU_PROTENSET1_PROTREG61_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG61_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG61_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 28 : Protection enable for region 60. */ -#define MPU_PROTENSET1_PROTREG60_Pos (28UL) /*!< Position of PROTREG60 field. */ -#define MPU_PROTENSET1_PROTREG60_Msk (0x1UL << MPU_PROTENSET1_PROTREG60_Pos) /*!< Bit mask of PROTREG60 field. */ -#define MPU_PROTENSET1_PROTREG60_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG60_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG60_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 27 : Protection enable for region 59. */ -#define MPU_PROTENSET1_PROTREG59_Pos (27UL) /*!< Position of PROTREG59 field. */ -#define MPU_PROTENSET1_PROTREG59_Msk (0x1UL << MPU_PROTENSET1_PROTREG59_Pos) /*!< Bit mask of PROTREG59 field. */ -#define MPU_PROTENSET1_PROTREG59_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG59_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG59_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 26 : Protection enable for region 58. */ -#define MPU_PROTENSET1_PROTREG58_Pos (26UL) /*!< Position of PROTREG58 field. */ -#define MPU_PROTENSET1_PROTREG58_Msk (0x1UL << MPU_PROTENSET1_PROTREG58_Pos) /*!< Bit mask of PROTREG58 field. */ -#define MPU_PROTENSET1_PROTREG58_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG58_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG58_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 25 : Protection enable for region 57. */ -#define MPU_PROTENSET1_PROTREG57_Pos (25UL) /*!< Position of PROTREG57 field. */ -#define MPU_PROTENSET1_PROTREG57_Msk (0x1UL << MPU_PROTENSET1_PROTREG57_Pos) /*!< Bit mask of PROTREG57 field. */ -#define MPU_PROTENSET1_PROTREG57_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG57_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG57_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 24 : Protection enable for region 56. */ -#define MPU_PROTENSET1_PROTREG56_Pos (24UL) /*!< Position of PROTREG56 field. */ -#define MPU_PROTENSET1_PROTREG56_Msk (0x1UL << MPU_PROTENSET1_PROTREG56_Pos) /*!< Bit mask of PROTREG56 field. */ -#define MPU_PROTENSET1_PROTREG56_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG56_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG56_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 23 : Protection enable for region 55. */ -#define MPU_PROTENSET1_PROTREG55_Pos (23UL) /*!< Position of PROTREG55 field. */ -#define MPU_PROTENSET1_PROTREG55_Msk (0x1UL << MPU_PROTENSET1_PROTREG55_Pos) /*!< Bit mask of PROTREG55 field. */ -#define MPU_PROTENSET1_PROTREG55_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG55_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG55_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 22 : Protection enable for region 54. */ -#define MPU_PROTENSET1_PROTREG54_Pos (22UL) /*!< Position of PROTREG54 field. */ -#define MPU_PROTENSET1_PROTREG54_Msk (0x1UL << MPU_PROTENSET1_PROTREG54_Pos) /*!< Bit mask of PROTREG54 field. */ -#define MPU_PROTENSET1_PROTREG54_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG54_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG54_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 21 : Protection enable for region 53. */ -#define MPU_PROTENSET1_PROTREG53_Pos (21UL) /*!< Position of PROTREG53 field. */ -#define MPU_PROTENSET1_PROTREG53_Msk (0x1UL << MPU_PROTENSET1_PROTREG53_Pos) /*!< Bit mask of PROTREG53 field. */ -#define MPU_PROTENSET1_PROTREG53_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG53_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG53_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 20 : Protection enable for region 52. */ -#define MPU_PROTENSET1_PROTREG52_Pos (20UL) /*!< Position of PROTREG52 field. */ -#define MPU_PROTENSET1_PROTREG52_Msk (0x1UL << MPU_PROTENSET1_PROTREG52_Pos) /*!< Bit mask of PROTREG52 field. */ -#define MPU_PROTENSET1_PROTREG52_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG52_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG52_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 19 : Protection enable for region 51. */ -#define MPU_PROTENSET1_PROTREG51_Pos (19UL) /*!< Position of PROTREG51 field. */ -#define MPU_PROTENSET1_PROTREG51_Msk (0x1UL << MPU_PROTENSET1_PROTREG51_Pos) /*!< Bit mask of PROTREG51 field. */ -#define MPU_PROTENSET1_PROTREG51_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG51_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG51_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 18 : Protection enable for region 50. */ -#define MPU_PROTENSET1_PROTREG50_Pos (18UL) /*!< Position of PROTREG50 field. */ -#define MPU_PROTENSET1_PROTREG50_Msk (0x1UL << MPU_PROTENSET1_PROTREG50_Pos) /*!< Bit mask of PROTREG50 field. */ -#define MPU_PROTENSET1_PROTREG50_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG50_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG50_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 17 : Protection enable for region 49. */ -#define MPU_PROTENSET1_PROTREG49_Pos (17UL) /*!< Position of PROTREG49 field. */ -#define MPU_PROTENSET1_PROTREG49_Msk (0x1UL << MPU_PROTENSET1_PROTREG49_Pos) /*!< Bit mask of PROTREG49 field. */ -#define MPU_PROTENSET1_PROTREG49_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG49_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG49_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 16 : Protection enable for region 48. */ -#define MPU_PROTENSET1_PROTREG48_Pos (16UL) /*!< Position of PROTREG48 field. */ -#define MPU_PROTENSET1_PROTREG48_Msk (0x1UL << MPU_PROTENSET1_PROTREG48_Pos) /*!< Bit mask of PROTREG48 field. */ -#define MPU_PROTENSET1_PROTREG48_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG48_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG48_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 15 : Protection enable for region 47. */ -#define MPU_PROTENSET1_PROTREG47_Pos (15UL) /*!< Position of PROTREG47 field. */ -#define MPU_PROTENSET1_PROTREG47_Msk (0x1UL << MPU_PROTENSET1_PROTREG47_Pos) /*!< Bit mask of PROTREG47 field. */ -#define MPU_PROTENSET1_PROTREG47_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG47_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG47_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 14 : Protection enable for region 46. */ -#define MPU_PROTENSET1_PROTREG46_Pos (14UL) /*!< Position of PROTREG46 field. */ -#define MPU_PROTENSET1_PROTREG46_Msk (0x1UL << MPU_PROTENSET1_PROTREG46_Pos) /*!< Bit mask of PROTREG46 field. */ -#define MPU_PROTENSET1_PROTREG46_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG46_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG46_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 13 : Protection enable for region 45. */ -#define MPU_PROTENSET1_PROTREG45_Pos (13UL) /*!< Position of PROTREG45 field. */ -#define MPU_PROTENSET1_PROTREG45_Msk (0x1UL << MPU_PROTENSET1_PROTREG45_Pos) /*!< Bit mask of PROTREG45 field. */ -#define MPU_PROTENSET1_PROTREG45_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG45_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG45_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 12 : Protection enable for region 44. */ -#define MPU_PROTENSET1_PROTREG44_Pos (12UL) /*!< Position of PROTREG44 field. */ -#define MPU_PROTENSET1_PROTREG44_Msk (0x1UL << MPU_PROTENSET1_PROTREG44_Pos) /*!< Bit mask of PROTREG44 field. */ -#define MPU_PROTENSET1_PROTREG44_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG44_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG44_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 11 : Protection enable for region 43. */ -#define MPU_PROTENSET1_PROTREG43_Pos (11UL) /*!< Position of PROTREG43 field. */ -#define MPU_PROTENSET1_PROTREG43_Msk (0x1UL << MPU_PROTENSET1_PROTREG43_Pos) /*!< Bit mask of PROTREG43 field. */ -#define MPU_PROTENSET1_PROTREG43_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG43_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG43_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 10 : Protection enable for region 42. */ -#define MPU_PROTENSET1_PROTREG42_Pos (10UL) /*!< Position of PROTREG42 field. */ -#define MPU_PROTENSET1_PROTREG42_Msk (0x1UL << MPU_PROTENSET1_PROTREG42_Pos) /*!< Bit mask of PROTREG42 field. */ -#define MPU_PROTENSET1_PROTREG42_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG42_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG42_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 9 : Protection enable for region 41. */ -#define MPU_PROTENSET1_PROTREG41_Pos (9UL) /*!< Position of PROTREG41 field. */ -#define MPU_PROTENSET1_PROTREG41_Msk (0x1UL << MPU_PROTENSET1_PROTREG41_Pos) /*!< Bit mask of PROTREG41 field. */ -#define MPU_PROTENSET1_PROTREG41_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG41_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG41_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 8 : Protection enable for region 40. */ -#define MPU_PROTENSET1_PROTREG40_Pos (8UL) /*!< Position of PROTREG40 field. */ -#define MPU_PROTENSET1_PROTREG40_Msk (0x1UL << MPU_PROTENSET1_PROTREG40_Pos) /*!< Bit mask of PROTREG40 field. */ -#define MPU_PROTENSET1_PROTREG40_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG40_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG40_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 7 : Protection enable for region 39. */ -#define MPU_PROTENSET1_PROTREG39_Pos (7UL) /*!< Position of PROTREG39 field. */ -#define MPU_PROTENSET1_PROTREG39_Msk (0x1UL << MPU_PROTENSET1_PROTREG39_Pos) /*!< Bit mask of PROTREG39 field. */ -#define MPU_PROTENSET1_PROTREG39_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG39_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG39_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 6 : Protection enable for region 38. */ -#define MPU_PROTENSET1_PROTREG38_Pos (6UL) /*!< Position of PROTREG38 field. */ -#define MPU_PROTENSET1_PROTREG38_Msk (0x1UL << MPU_PROTENSET1_PROTREG38_Pos) /*!< Bit mask of PROTREG38 field. */ -#define MPU_PROTENSET1_PROTREG38_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG38_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG38_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 5 : Protection enable for region 37. */ -#define MPU_PROTENSET1_PROTREG37_Pos (5UL) /*!< Position of PROTREG37 field. */ -#define MPU_PROTENSET1_PROTREG37_Msk (0x1UL << MPU_PROTENSET1_PROTREG37_Pos) /*!< Bit mask of PROTREG37 field. */ -#define MPU_PROTENSET1_PROTREG37_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG37_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG37_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 4 : Protection enable for region 36. */ -#define MPU_PROTENSET1_PROTREG36_Pos (4UL) /*!< Position of PROTREG36 field. */ -#define MPU_PROTENSET1_PROTREG36_Msk (0x1UL << MPU_PROTENSET1_PROTREG36_Pos) /*!< Bit mask of PROTREG36 field. */ -#define MPU_PROTENSET1_PROTREG36_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG36_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG36_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 3 : Protection enable for region 35. */ -#define MPU_PROTENSET1_PROTREG35_Pos (3UL) /*!< Position of PROTREG35 field. */ -#define MPU_PROTENSET1_PROTREG35_Msk (0x1UL << MPU_PROTENSET1_PROTREG35_Pos) /*!< Bit mask of PROTREG35 field. */ -#define MPU_PROTENSET1_PROTREG35_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG35_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG35_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 2 : Protection enable for region 34. */ -#define MPU_PROTENSET1_PROTREG34_Pos (2UL) /*!< Position of PROTREG34 field. */ -#define MPU_PROTENSET1_PROTREG34_Msk (0x1UL << MPU_PROTENSET1_PROTREG34_Pos) /*!< Bit mask of PROTREG34 field. */ -#define MPU_PROTENSET1_PROTREG34_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG34_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG34_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 1 : Protection enable for region 33. */ -#define MPU_PROTENSET1_PROTREG33_Pos (1UL) /*!< Position of PROTREG33 field. */ -#define MPU_PROTENSET1_PROTREG33_Msk (0x1UL << MPU_PROTENSET1_PROTREG33_Pos) /*!< Bit mask of PROTREG33 field. */ -#define MPU_PROTENSET1_PROTREG33_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG33_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG33_Set (1UL) /*!< Enable protection on write. */ - -/* Bit 0 : Protection enable for region 32. */ -#define MPU_PROTENSET1_PROTREG32_Pos (0UL) /*!< Position of PROTREG32 field. */ -#define MPU_PROTENSET1_PROTREG32_Msk (0x1UL << MPU_PROTENSET1_PROTREG32_Pos) /*!< Bit mask of PROTREG32 field. */ -#define MPU_PROTENSET1_PROTREG32_Disabled (0UL) /*!< Protection disabled. */ -#define MPU_PROTENSET1_PROTREG32_Enabled (1UL) /*!< Protection enabled. */ -#define MPU_PROTENSET1_PROTREG32_Set (1UL) /*!< Enable protection on write. */ - -/* Register: MPU_DISABLEINDEBUG */ -/* Description: Disable erase and write protection mechanism in debug mode. */ - -/* Bit 0 : Disable protection mechanism in debug mode. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos (0UL) /*!< Position of DISABLEINDEBUG field. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Msk (0x1UL << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos) /*!< Bit mask of DISABLEINDEBUG field. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Enabled (0UL) /*!< Protection enabled. */ -#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled (1UL) /*!< Protection disabled. */ - -/* Register: MPU_PROTBLOCKSIZE */ -/* Description: Erase and write protection block size. */ - -/* Bits 1..0 : Erase and write protection block size. */ -#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos (0UL) /*!< Position of PROTBLOCKSIZE field. */ -#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Msk (0x3UL << MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos) /*!< Bit mask of PROTBLOCKSIZE field. */ -#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_4k (0UL) /*!< Erase and write protection block size is 4k. */ - - -/* Peripheral: NVMC */ -/* Description: Non Volatile Memory Controller. */ - -/* Register: NVMC_READY */ -/* Description: Ready flag. */ - -/* Bit 0 : NVMC ready. */ -#define NVMC_READY_READY_Pos (0UL) /*!< Position of READY field. */ -#define NVMC_READY_READY_Msk (0x1UL << NVMC_READY_READY_Pos) /*!< Bit mask of READY field. */ -#define NVMC_READY_READY_Busy (0UL) /*!< NVMC is busy (on-going write or erase operation). */ -#define NVMC_READY_READY_Ready (1UL) /*!< NVMC is ready. */ - -/* Register: NVMC_CONFIG */ -/* Description: Configuration register. */ - -/* Bits 1..0 : Program write enable. */ -#define NVMC_CONFIG_WEN_Pos (0UL) /*!< Position of WEN field. */ -#define NVMC_CONFIG_WEN_Msk (0x3UL << NVMC_CONFIG_WEN_Pos) /*!< Bit mask of WEN field. */ -#define NVMC_CONFIG_WEN_Ren (0x00UL) /*!< Read only access. */ -#define NVMC_CONFIG_WEN_Wen (0x01UL) /*!< Write enabled. */ -#define NVMC_CONFIG_WEN_Een (0x02UL) /*!< Erase enabled. */ - -/* Register: NVMC_ERASEALL */ -/* Description: Register for erasing all non-volatile user memory. */ - -/* Bit 0 : Starts the erasing of all user NVM (code region 0/1 and UICR registers). */ -#define NVMC_ERASEALL_ERASEALL_Pos (0UL) /*!< Position of ERASEALL field. */ -#define NVMC_ERASEALL_ERASEALL_Msk (0x1UL << NVMC_ERASEALL_ERASEALL_Pos) /*!< Bit mask of ERASEALL field. */ -#define NVMC_ERASEALL_ERASEALL_NoOperation (0UL) /*!< No operation. */ -#define NVMC_ERASEALL_ERASEALL_Erase (1UL) /*!< Start chip erase. */ - -/* Register: NVMC_ERASEUICR */ -/* Description: Register for start erasing User Information Congfiguration Registers. */ - -/* Bit 0 : It can only be used when all contents of code region 1 are erased. */ -#define NVMC_ERASEUICR_ERASEUICR_Pos (0UL) /*!< Position of ERASEUICR field. */ -#define NVMC_ERASEUICR_ERASEUICR_Msk (0x1UL << NVMC_ERASEUICR_ERASEUICR_Pos) /*!< Bit mask of ERASEUICR field. */ -#define NVMC_ERASEUICR_ERASEUICR_NoOperation (0UL) /*!< No operation. */ -#define NVMC_ERASEUICR_ERASEUICR_Erase (1UL) /*!< Start UICR erase. */ - - -/* Peripheral: POWER */ -/* Description: Power Control. */ - -/* Register: POWER_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on POFWARN event. */ -#define POWER_INTENSET_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ -#define POWER_INTENSET_POFWARN_Msk (0x1UL << POWER_INTENSET_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ -#define POWER_INTENSET_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ -#define POWER_INTENSET_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ -#define POWER_INTENSET_POFWARN_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: POWER_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on POFWARN event. */ -#define POWER_INTENCLR_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ -#define POWER_INTENCLR_POFWARN_Msk (0x1UL << POWER_INTENCLR_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ -#define POWER_INTENCLR_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ -#define POWER_INTENCLR_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ -#define POWER_INTENCLR_POFWARN_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: POWER_RESETREAS */ -/* Description: Reset reason. */ - -/* Bit 18 : Reset from wake-up from OFF mode detected by entering into debug interface mode. */ -#define POWER_RESETREAS_DIF_Pos (18UL) /*!< Position of DIF field. */ -#define POWER_RESETREAS_DIF_Msk (0x1UL << POWER_RESETREAS_DIF_Pos) /*!< Bit mask of DIF field. */ -#define POWER_RESETREAS_DIF_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_DIF_Detected (1UL) /*!< Reset detected. */ - -/* Bit 17 : Reset from wake-up from OFF mode detected by the use of ANADETECT signal from LPCOMP. */ -#define POWER_RESETREAS_LPCOMP_Pos (17UL) /*!< Position of LPCOMP field. */ -#define POWER_RESETREAS_LPCOMP_Msk (0x1UL << POWER_RESETREAS_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ -#define POWER_RESETREAS_LPCOMP_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_LPCOMP_Detected (1UL) /*!< Reset detected. */ - -/* Bit 16 : Reset from wake-up from OFF mode detected by the use of DETECT signal from GPIO. */ -#define POWER_RESETREAS_OFF_Pos (16UL) /*!< Position of OFF field. */ -#define POWER_RESETREAS_OFF_Msk (0x1UL << POWER_RESETREAS_OFF_Pos) /*!< Bit mask of OFF field. */ -#define POWER_RESETREAS_OFF_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_OFF_Detected (1UL) /*!< Reset detected. */ - -/* Bit 3 : Reset from CPU lock-up detected. */ -#define POWER_RESETREAS_LOCKUP_Pos (3UL) /*!< Position of LOCKUP field. */ -#define POWER_RESETREAS_LOCKUP_Msk (0x1UL << POWER_RESETREAS_LOCKUP_Pos) /*!< Bit mask of LOCKUP field. */ -#define POWER_RESETREAS_LOCKUP_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_LOCKUP_Detected (1UL) /*!< Reset detected. */ - -/* Bit 2 : Reset from AIRCR.SYSRESETREQ detected. */ -#define POWER_RESETREAS_SREQ_Pos (2UL) /*!< Position of SREQ field. */ -#define POWER_RESETREAS_SREQ_Msk (0x1UL << POWER_RESETREAS_SREQ_Pos) /*!< Bit mask of SREQ field. */ -#define POWER_RESETREAS_SREQ_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_SREQ_Detected (1UL) /*!< Reset detected. */ - -/* Bit 1 : Reset from watchdog detected. */ -#define POWER_RESETREAS_DOG_Pos (1UL) /*!< Position of DOG field. */ -#define POWER_RESETREAS_DOG_Msk (0x1UL << POWER_RESETREAS_DOG_Pos) /*!< Bit mask of DOG field. */ -#define POWER_RESETREAS_DOG_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_DOG_Detected (1UL) /*!< Reset detected. */ - -/* Bit 0 : Reset from pin-reset detected. */ -#define POWER_RESETREAS_RESETPIN_Pos (0UL) /*!< Position of RESETPIN field. */ -#define POWER_RESETREAS_RESETPIN_Msk (0x1UL << POWER_RESETREAS_RESETPIN_Pos) /*!< Bit mask of RESETPIN field. */ -#define POWER_RESETREAS_RESETPIN_NotDetected (0UL) /*!< Reset not detected. */ -#define POWER_RESETREAS_RESETPIN_Detected (1UL) /*!< Reset detected. */ - -/* Register: POWER_RAMSTATUS */ -/* Description: Ram status register. */ - -/* Bit 3 : RAM block 3 status. */ -#define POWER_RAMSTATUS_RAMBLOCK3_Pos (3UL) /*!< Position of RAMBLOCK3 field. */ -#define POWER_RAMSTATUS_RAMBLOCK3_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK3_Pos) /*!< Bit mask of RAMBLOCK3 field. */ -#define POWER_RAMSTATUS_RAMBLOCK3_Off (0UL) /*!< RAM block 3 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK3_On (1UL) /*!< RAM block 3 is on. */ - -/* Bit 2 : RAM block 2 status. */ -#define POWER_RAMSTATUS_RAMBLOCK2_Pos (2UL) /*!< Position of RAMBLOCK2 field. */ -#define POWER_RAMSTATUS_RAMBLOCK2_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK2_Pos) /*!< Bit mask of RAMBLOCK2 field. */ -#define POWER_RAMSTATUS_RAMBLOCK2_Off (0UL) /*!< RAM block 2 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK2_On (1UL) /*!< RAM block 2 is on. */ - -/* Bit 1 : RAM block 1 status. */ -#define POWER_RAMSTATUS_RAMBLOCK1_Pos (1UL) /*!< Position of RAMBLOCK1 field. */ -#define POWER_RAMSTATUS_RAMBLOCK1_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK1_Pos) /*!< Bit mask of RAMBLOCK1 field. */ -#define POWER_RAMSTATUS_RAMBLOCK1_Off (0UL) /*!< RAM block 1 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK1_On (1UL) /*!< RAM block 1 is on. */ - -/* Bit 0 : RAM block 0 status. */ -#define POWER_RAMSTATUS_RAMBLOCK0_Pos (0UL) /*!< Position of RAMBLOCK0 field. */ -#define POWER_RAMSTATUS_RAMBLOCK0_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK0_Pos) /*!< Bit mask of RAMBLOCK0 field. */ -#define POWER_RAMSTATUS_RAMBLOCK0_Off (0UL) /*!< RAM block 0 is off or powering up. */ -#define POWER_RAMSTATUS_RAMBLOCK0_On (1UL) /*!< RAM block 0 is on. */ - -/* Register: POWER_SYSTEMOFF */ -/* Description: System off register. */ - -/* Bit 0 : Enter system off mode. */ -#define POWER_SYSTEMOFF_SYSTEMOFF_Pos (0UL) /*!< Position of SYSTEMOFF field. */ -#define POWER_SYSTEMOFF_SYSTEMOFF_Msk (0x1UL << POWER_SYSTEMOFF_SYSTEMOFF_Pos) /*!< Bit mask of SYSTEMOFF field. */ -#define POWER_SYSTEMOFF_SYSTEMOFF_Enter (1UL) /*!< Enter system off mode. */ - -/* Register: POWER_POFCON */ -/* Description: Power failure configuration. */ - -/* Bits 2..1 : Set threshold level. */ -#define POWER_POFCON_THRESHOLD_Pos (1UL) /*!< Position of THRESHOLD field. */ -#define POWER_POFCON_THRESHOLD_Msk (0x3UL << POWER_POFCON_THRESHOLD_Pos) /*!< Bit mask of THRESHOLD field. */ -#define POWER_POFCON_THRESHOLD_V21 (0x00UL) /*!< Set threshold to 2.1Volts. */ -#define POWER_POFCON_THRESHOLD_V23 (0x01UL) /*!< Set threshold to 2.3Volts. */ -#define POWER_POFCON_THRESHOLD_V25 (0x02UL) /*!< Set threshold to 2.5Volts. */ -#define POWER_POFCON_THRESHOLD_V27 (0x03UL) /*!< Set threshold to 2.7Volts. */ - -/* Bit 0 : Power failure comparator enable. */ -#define POWER_POFCON_POF_Pos (0UL) /*!< Position of POF field. */ -#define POWER_POFCON_POF_Msk (0x1UL << POWER_POFCON_POF_Pos) /*!< Bit mask of POF field. */ -#define POWER_POFCON_POF_Disabled (0UL) /*!< Disabled. */ -#define POWER_POFCON_POF_Enabled (1UL) /*!< Enabled. */ - -/* Register: POWER_GPREGRET */ -/* Description: General purpose retention register. This register is a retained register. */ - -/* Bits 7..0 : General purpose retention register. */ -#define POWER_GPREGRET_GPREGRET_Pos (0UL) /*!< Position of GPREGRET field. */ -#define POWER_GPREGRET_GPREGRET_Msk (0xFFUL << POWER_GPREGRET_GPREGRET_Pos) /*!< Bit mask of GPREGRET field. */ - -/* Register: POWER_RAMON */ -/* Description: Ram on/off. */ - -/* Bit 17 : RAM block 1 behaviour in OFF mode. */ -#define POWER_RAMON_OFFRAM1_Pos (17UL) /*!< Position of OFFRAM1 field. */ -#define POWER_RAMON_OFFRAM1_Msk (0x1UL << POWER_RAMON_OFFRAM1_Pos) /*!< Bit mask of OFFRAM1 field. */ -#define POWER_RAMON_OFFRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in OFF mode. */ -#define POWER_RAMON_OFFRAM1_RAM1On (1UL) /*!< RAM block 1 ON in OFF mode. */ - -/* Bit 16 : RAM block 0 behaviour in OFF mode. */ -#define POWER_RAMON_OFFRAM0_Pos (16UL) /*!< Position of OFFRAM0 field. */ -#define POWER_RAMON_OFFRAM0_Msk (0x1UL << POWER_RAMON_OFFRAM0_Pos) /*!< Bit mask of OFFRAM0 field. */ -#define POWER_RAMON_OFFRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in OFF mode. */ -#define POWER_RAMON_OFFRAM0_RAM0On (1UL) /*!< RAM block 0 ON in OFF mode. */ - -/* Bit 1 : RAM block 1 behaviour in ON mode. */ -#define POWER_RAMON_ONRAM1_Pos (1UL) /*!< Position of ONRAM1 field. */ -#define POWER_RAMON_ONRAM1_Msk (0x1UL << POWER_RAMON_ONRAM1_Pos) /*!< Bit mask of ONRAM1 field. */ -#define POWER_RAMON_ONRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in ON mode. */ -#define POWER_RAMON_ONRAM1_RAM1On (1UL) /*!< RAM block 1 ON in ON mode. */ - -/* Bit 0 : RAM block 0 behaviour in ON mode. */ -#define POWER_RAMON_ONRAM0_Pos (0UL) /*!< Position of ONRAM0 field. */ -#define POWER_RAMON_ONRAM0_Msk (0x1UL << POWER_RAMON_ONRAM0_Pos) /*!< Bit mask of ONRAM0 field. */ -#define POWER_RAMON_ONRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in ON mode. */ -#define POWER_RAMON_ONRAM0_RAM0On (1UL) /*!< RAM block 0 ON in ON mode. */ - -/* Register: POWER_RESET */ -/* Description: Pin reset functionality configuration register. This register is a retained register. */ - -/* Bit 0 : Enable or disable pin reset in debug interface mode. */ -#define POWER_RESET_RESET_Pos (0UL) /*!< Position of RESET field. */ -#define POWER_RESET_RESET_Msk (0x1UL << POWER_RESET_RESET_Pos) /*!< Bit mask of RESET field. */ -#define POWER_RESET_RESET_Disabled (0UL) /*!< Pin reset in debug interface mode disabled. */ -#define POWER_RESET_RESET_Enabled (1UL) /*!< Pin reset in debug interface mode enabled. */ - -/* Register: POWER_RAMONB */ -/* Description: Ram on/off. */ - -/* Bit 17 : RAM block 3 behaviour in OFF mode. */ -#define POWER_RAMONB_OFFRAM3_Pos (17UL) /*!< Position of OFFRAM3 field. */ -#define POWER_RAMONB_OFFRAM3_Msk (0x1UL << POWER_RAMONB_OFFRAM3_Pos) /*!< Bit mask of OFFRAM3 field. */ -#define POWER_RAMONB_OFFRAM3_RAM3Off (0UL) /*!< RAM block 3 OFF in OFF mode. */ -#define POWER_RAMONB_OFFRAM3_RAM3On (1UL) /*!< RAM block 3 ON in OFF mode. */ - -/* Bit 16 : RAM block 2 behaviour in OFF mode. */ -#define POWER_RAMONB_OFFRAM2_Pos (16UL) /*!< Position of OFFRAM2 field. */ -#define POWER_RAMONB_OFFRAM2_Msk (0x1UL << POWER_RAMONB_OFFRAM2_Pos) /*!< Bit mask of OFFRAM2 field. */ -#define POWER_RAMONB_OFFRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in OFF mode. */ -#define POWER_RAMONB_OFFRAM2_RAM2On (1UL) /*!< RAM block 2 ON in OFF mode. */ - -/* Bit 1 : RAM block 3 behaviour in ON mode. */ -#define POWER_RAMONB_ONRAM3_Pos (1UL) /*!< Position of ONRAM3 field. */ -#define POWER_RAMONB_ONRAM3_Msk (0x1UL << POWER_RAMONB_ONRAM3_Pos) /*!< Bit mask of ONRAM3 field. */ -#define POWER_RAMONB_ONRAM3_RAM3Off (0UL) /*!< RAM block 33 OFF in ON mode. */ -#define POWER_RAMONB_ONRAM3_RAM3On (1UL) /*!< RAM block 3 ON in ON mode. */ - -/* Bit 0 : RAM block 2 behaviour in ON mode. */ -#define POWER_RAMONB_ONRAM2_Pos (0UL) /*!< Position of ONRAM2 field. */ -#define POWER_RAMONB_ONRAM2_Msk (0x1UL << POWER_RAMONB_ONRAM2_Pos) /*!< Bit mask of ONRAM2 field. */ -#define POWER_RAMONB_ONRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in ON mode. */ -#define POWER_RAMONB_ONRAM2_RAM2On (1UL) /*!< RAM block 2 ON in ON mode. */ - -/* Register: POWER_DCDCEN */ -/* Description: DCDC converter enable configuration register. */ - -/* Bit 0 : Enable DCDC converter. */ -#define POWER_DCDCEN_DCDCEN_Pos (0UL) /*!< Position of DCDCEN field. */ -#define POWER_DCDCEN_DCDCEN_Msk (0x1UL << POWER_DCDCEN_DCDCEN_Pos) /*!< Bit mask of DCDCEN field. */ -#define POWER_DCDCEN_DCDCEN_Disabled (0UL) /*!< DCDC converter disabled. */ -#define POWER_DCDCEN_DCDCEN_Enabled (1UL) /*!< DCDC converter enabled. */ - -/* Register: POWER_DCDCFORCE */ -/* Description: DCDC power-up force register. */ - -/* Bit 1 : DCDC power-up force on. */ -#define POWER_DCDCFORCE_FORCEON_Pos (1UL) /*!< Position of FORCEON field. */ -#define POWER_DCDCFORCE_FORCEON_Msk (0x1UL << POWER_DCDCFORCE_FORCEON_Pos) /*!< Bit mask of FORCEON field. */ -#define POWER_DCDCFORCE_FORCEON_NoForce (0UL) /*!< No force. */ -#define POWER_DCDCFORCE_FORCEON_Force (1UL) /*!< Force. */ - -/* Bit 0 : DCDC power-up force off. */ -#define POWER_DCDCFORCE_FORCEOFF_Pos (0UL) /*!< Position of FORCEOFF field. */ -#define POWER_DCDCFORCE_FORCEOFF_Msk (0x1UL << POWER_DCDCFORCE_FORCEOFF_Pos) /*!< Bit mask of FORCEOFF field. */ -#define POWER_DCDCFORCE_FORCEOFF_NoForce (0UL) /*!< No force. */ -#define POWER_DCDCFORCE_FORCEOFF_Force (1UL) /*!< Force. */ - - -/* Peripheral: PPI */ -/* Description: PPI controller. */ - -/* Register: PPI_CHEN */ -/* Description: Channel enable. */ - -/* Bit 31 : Enable PPI channel 31. */ -#define PPI_CHEN_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHEN_CH31_Msk (0x1UL << PPI_CHEN_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHEN_CH31_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH31_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 30 : Enable PPI channel 30. */ -#define PPI_CHEN_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHEN_CH30_Msk (0x1UL << PPI_CHEN_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHEN_CH30_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH30_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 29 : Enable PPI channel 29. */ -#define PPI_CHEN_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHEN_CH29_Msk (0x1UL << PPI_CHEN_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHEN_CH29_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH29_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 28 : Enable PPI channel 28. */ -#define PPI_CHEN_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHEN_CH28_Msk (0x1UL << PPI_CHEN_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHEN_CH28_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH28_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 27 : Enable PPI channel 27. */ -#define PPI_CHEN_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHEN_CH27_Msk (0x1UL << PPI_CHEN_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHEN_CH27_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH27_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 26 : Enable PPI channel 26. */ -#define PPI_CHEN_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHEN_CH26_Msk (0x1UL << PPI_CHEN_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHEN_CH26_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH26_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 25 : Enable PPI channel 25. */ -#define PPI_CHEN_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHEN_CH25_Msk (0x1UL << PPI_CHEN_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHEN_CH25_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH25_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 24 : Enable PPI channel 24. */ -#define PPI_CHEN_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHEN_CH24_Msk (0x1UL << PPI_CHEN_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHEN_CH24_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH24_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 23 : Enable PPI channel 23. */ -#define PPI_CHEN_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHEN_CH23_Msk (0x1UL << PPI_CHEN_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHEN_CH23_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH23_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 22 : Enable PPI channel 22. */ -#define PPI_CHEN_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHEN_CH22_Msk (0x1UL << PPI_CHEN_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHEN_CH22_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH22_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 21 : Enable PPI channel 21. */ -#define PPI_CHEN_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHEN_CH21_Msk (0x1UL << PPI_CHEN_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHEN_CH21_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH21_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 20 : Enable PPI channel 20. */ -#define PPI_CHEN_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHEN_CH20_Msk (0x1UL << PPI_CHEN_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHEN_CH20_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH20_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 15 : Enable PPI channel 15. */ -#define PPI_CHEN_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHEN_CH15_Msk (0x1UL << PPI_CHEN_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHEN_CH15_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH15_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 14 : Enable PPI channel 14. */ -#define PPI_CHEN_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHEN_CH14_Msk (0x1UL << PPI_CHEN_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHEN_CH14_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH14_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 13 : Enable PPI channel 13. */ -#define PPI_CHEN_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHEN_CH13_Msk (0x1UL << PPI_CHEN_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHEN_CH13_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH13_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 12 : Enable PPI channel 12. */ -#define PPI_CHEN_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHEN_CH12_Msk (0x1UL << PPI_CHEN_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHEN_CH12_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH12_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 11 : Enable PPI channel 11. */ -#define PPI_CHEN_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHEN_CH11_Msk (0x1UL << PPI_CHEN_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHEN_CH11_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH11_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 10 : Enable PPI channel 10. */ -#define PPI_CHEN_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHEN_CH10_Msk (0x1UL << PPI_CHEN_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHEN_CH10_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH10_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 9 : Enable PPI channel 9. */ -#define PPI_CHEN_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHEN_CH9_Msk (0x1UL << PPI_CHEN_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHEN_CH9_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH9_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 8 : Enable PPI channel 8. */ -#define PPI_CHEN_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHEN_CH8_Msk (0x1UL << PPI_CHEN_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHEN_CH8_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH8_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 7 : Enable PPI channel 7. */ -#define PPI_CHEN_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHEN_CH7_Msk (0x1UL << PPI_CHEN_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHEN_CH7_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH7_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 6 : Enable PPI channel 6. */ -#define PPI_CHEN_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHEN_CH6_Msk (0x1UL << PPI_CHEN_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHEN_CH6_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH6_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 5 : Enable PPI channel 5. */ -#define PPI_CHEN_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHEN_CH5_Msk (0x1UL << PPI_CHEN_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHEN_CH5_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH5_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 4 : Enable PPI channel 4. */ -#define PPI_CHEN_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHEN_CH4_Msk (0x1UL << PPI_CHEN_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHEN_CH4_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH4_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 3 : Enable PPI channel 3. */ -#define PPI_CHEN_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHEN_CH3_Msk (0x1UL << PPI_CHEN_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHEN_CH3_Disabled (0UL) /*!< Channel disabled */ -#define PPI_CHEN_CH3_Enabled (1UL) /*!< Channel enabled */ - -/* Bit 2 : Enable PPI channel 2. */ -#define PPI_CHEN_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHEN_CH2_Msk (0x1UL << PPI_CHEN_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHEN_CH2_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH2_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 1 : Enable PPI channel 1. */ -#define PPI_CHEN_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHEN_CH1_Msk (0x1UL << PPI_CHEN_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHEN_CH1_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH1_Enabled (1UL) /*!< Channel enabled. */ - -/* Bit 0 : Enable PPI channel 0. */ -#define PPI_CHEN_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHEN_CH0_Msk (0x1UL << PPI_CHEN_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHEN_CH0_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHEN_CH0_Enabled (1UL) /*!< Channel enabled. */ - -/* Register: PPI_CHENSET */ -/* Description: Channel enable set. */ - -/* Bit 31 : Enable PPI channel 31. */ -#define PPI_CHENSET_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHENSET_CH31_Msk (0x1UL << PPI_CHENSET_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHENSET_CH31_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH31_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH31_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 30 : Enable PPI channel 30. */ -#define PPI_CHENSET_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHENSET_CH30_Msk (0x1UL << PPI_CHENSET_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHENSET_CH30_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH30_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH30_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 29 : Enable PPI channel 29. */ -#define PPI_CHENSET_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHENSET_CH29_Msk (0x1UL << PPI_CHENSET_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHENSET_CH29_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH29_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH29_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 28 : Enable PPI channel 28. */ -#define PPI_CHENSET_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHENSET_CH28_Msk (0x1UL << PPI_CHENSET_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHENSET_CH28_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH28_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH28_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 27 : Enable PPI channel 27. */ -#define PPI_CHENSET_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHENSET_CH27_Msk (0x1UL << PPI_CHENSET_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHENSET_CH27_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH27_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH27_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 26 : Enable PPI channel 26. */ -#define PPI_CHENSET_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHENSET_CH26_Msk (0x1UL << PPI_CHENSET_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHENSET_CH26_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH26_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH26_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 25 : Enable PPI channel 25. */ -#define PPI_CHENSET_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHENSET_CH25_Msk (0x1UL << PPI_CHENSET_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHENSET_CH25_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH25_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH25_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 24 : Enable PPI channel 24. */ -#define PPI_CHENSET_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHENSET_CH24_Msk (0x1UL << PPI_CHENSET_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHENSET_CH24_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH24_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH24_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 23 : Enable PPI channel 23. */ -#define PPI_CHENSET_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHENSET_CH23_Msk (0x1UL << PPI_CHENSET_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHENSET_CH23_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH23_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH23_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 22 : Enable PPI channel 22. */ -#define PPI_CHENSET_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHENSET_CH22_Msk (0x1UL << PPI_CHENSET_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHENSET_CH22_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH22_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH22_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 21 : Enable PPI channel 21. */ -#define PPI_CHENSET_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHENSET_CH21_Msk (0x1UL << PPI_CHENSET_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHENSET_CH21_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH21_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH21_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 20 : Enable PPI channel 20. */ -#define PPI_CHENSET_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHENSET_CH20_Msk (0x1UL << PPI_CHENSET_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHENSET_CH20_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH20_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH20_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 15 : Enable PPI channel 15. */ -#define PPI_CHENSET_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHENSET_CH15_Msk (0x1UL << PPI_CHENSET_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHENSET_CH15_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH15_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH15_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 14 : Enable PPI channel 14. */ -#define PPI_CHENSET_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHENSET_CH14_Msk (0x1UL << PPI_CHENSET_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHENSET_CH14_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH14_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH14_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 13 : Enable PPI channel 13. */ -#define PPI_CHENSET_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHENSET_CH13_Msk (0x1UL << PPI_CHENSET_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHENSET_CH13_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH13_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH13_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 12 : Enable PPI channel 12. */ -#define PPI_CHENSET_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHENSET_CH12_Msk (0x1UL << PPI_CHENSET_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHENSET_CH12_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH12_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH12_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 11 : Enable PPI channel 11. */ -#define PPI_CHENSET_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHENSET_CH11_Msk (0x1UL << PPI_CHENSET_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHENSET_CH11_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH11_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH11_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 10 : Enable PPI channel 10. */ -#define PPI_CHENSET_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHENSET_CH10_Msk (0x1UL << PPI_CHENSET_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHENSET_CH10_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH10_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH10_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 9 : Enable PPI channel 9. */ -#define PPI_CHENSET_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHENSET_CH9_Msk (0x1UL << PPI_CHENSET_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHENSET_CH9_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH9_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH9_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 8 : Enable PPI channel 8. */ -#define PPI_CHENSET_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHENSET_CH8_Msk (0x1UL << PPI_CHENSET_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHENSET_CH8_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH8_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH8_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 7 : Enable PPI channel 7. */ -#define PPI_CHENSET_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHENSET_CH7_Msk (0x1UL << PPI_CHENSET_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHENSET_CH7_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH7_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH7_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 6 : Enable PPI channel 6. */ -#define PPI_CHENSET_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHENSET_CH6_Msk (0x1UL << PPI_CHENSET_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHENSET_CH6_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH6_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH6_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 5 : Enable PPI channel 5. */ -#define PPI_CHENSET_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHENSET_CH5_Msk (0x1UL << PPI_CHENSET_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHENSET_CH5_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH5_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH5_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 4 : Enable PPI channel 4. */ -#define PPI_CHENSET_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHENSET_CH4_Msk (0x1UL << PPI_CHENSET_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHENSET_CH4_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH4_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH4_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 3 : Enable PPI channel 3. */ -#define PPI_CHENSET_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHENSET_CH3_Msk (0x1UL << PPI_CHENSET_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHENSET_CH3_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH3_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH3_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 2 : Enable PPI channel 2. */ -#define PPI_CHENSET_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHENSET_CH2_Msk (0x1UL << PPI_CHENSET_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHENSET_CH2_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH2_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH2_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 1 : Enable PPI channel 1. */ -#define PPI_CHENSET_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHENSET_CH1_Msk (0x1UL << PPI_CHENSET_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHENSET_CH1_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH1_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH1_Set (1UL) /*!< Enable channel on write. */ - -/* Bit 0 : Enable PPI channel 0. */ -#define PPI_CHENSET_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHENSET_CH0_Msk (0x1UL << PPI_CHENSET_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHENSET_CH0_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENSET_CH0_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENSET_CH0_Set (1UL) /*!< Enable channel on write. */ - -/* Register: PPI_CHENCLR */ -/* Description: Channel enable clear. */ - -/* Bit 31 : Disable PPI channel 31. */ -#define PPI_CHENCLR_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHENCLR_CH31_Msk (0x1UL << PPI_CHENCLR_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHENCLR_CH31_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH31_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH31_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 30 : Disable PPI channel 30. */ -#define PPI_CHENCLR_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHENCLR_CH30_Msk (0x1UL << PPI_CHENCLR_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHENCLR_CH30_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH30_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH30_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 29 : Disable PPI channel 29. */ -#define PPI_CHENCLR_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHENCLR_CH29_Msk (0x1UL << PPI_CHENCLR_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHENCLR_CH29_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH29_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH29_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 28 : Disable PPI channel 28. */ -#define PPI_CHENCLR_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHENCLR_CH28_Msk (0x1UL << PPI_CHENCLR_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHENCLR_CH28_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH28_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH28_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 27 : Disable PPI channel 27. */ -#define PPI_CHENCLR_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHENCLR_CH27_Msk (0x1UL << PPI_CHENCLR_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHENCLR_CH27_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH27_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH27_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 26 : Disable PPI channel 26. */ -#define PPI_CHENCLR_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHENCLR_CH26_Msk (0x1UL << PPI_CHENCLR_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHENCLR_CH26_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH26_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH26_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 25 : Disable PPI channel 25. */ -#define PPI_CHENCLR_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHENCLR_CH25_Msk (0x1UL << PPI_CHENCLR_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHENCLR_CH25_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH25_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH25_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 24 : Disable PPI channel 24. */ -#define PPI_CHENCLR_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHENCLR_CH24_Msk (0x1UL << PPI_CHENCLR_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHENCLR_CH24_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH24_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH24_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 23 : Disable PPI channel 23. */ -#define PPI_CHENCLR_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHENCLR_CH23_Msk (0x1UL << PPI_CHENCLR_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHENCLR_CH23_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH23_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH23_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 22 : Disable PPI channel 22. */ -#define PPI_CHENCLR_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHENCLR_CH22_Msk (0x1UL << PPI_CHENCLR_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHENCLR_CH22_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH22_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH22_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 21 : Disable PPI channel 21. */ -#define PPI_CHENCLR_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHENCLR_CH21_Msk (0x1UL << PPI_CHENCLR_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHENCLR_CH21_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH21_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH21_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 20 : Disable PPI channel 20. */ -#define PPI_CHENCLR_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHENCLR_CH20_Msk (0x1UL << PPI_CHENCLR_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHENCLR_CH20_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH20_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH20_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 15 : Disable PPI channel 15. */ -#define PPI_CHENCLR_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHENCLR_CH15_Msk (0x1UL << PPI_CHENCLR_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHENCLR_CH15_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH15_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH15_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 14 : Disable PPI channel 14. */ -#define PPI_CHENCLR_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHENCLR_CH14_Msk (0x1UL << PPI_CHENCLR_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHENCLR_CH14_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH14_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH14_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 13 : Disable PPI channel 13. */ -#define PPI_CHENCLR_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHENCLR_CH13_Msk (0x1UL << PPI_CHENCLR_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHENCLR_CH13_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH13_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH13_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 12 : Disable PPI channel 12. */ -#define PPI_CHENCLR_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHENCLR_CH12_Msk (0x1UL << PPI_CHENCLR_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHENCLR_CH12_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH12_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH12_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 11 : Disable PPI channel 11. */ -#define PPI_CHENCLR_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHENCLR_CH11_Msk (0x1UL << PPI_CHENCLR_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHENCLR_CH11_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH11_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH11_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 10 : Disable PPI channel 10. */ -#define PPI_CHENCLR_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHENCLR_CH10_Msk (0x1UL << PPI_CHENCLR_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHENCLR_CH10_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH10_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH10_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 9 : Disable PPI channel 9. */ -#define PPI_CHENCLR_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHENCLR_CH9_Msk (0x1UL << PPI_CHENCLR_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHENCLR_CH9_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH9_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH9_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 8 : Disable PPI channel 8. */ -#define PPI_CHENCLR_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHENCLR_CH8_Msk (0x1UL << PPI_CHENCLR_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHENCLR_CH8_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH8_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH8_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 7 : Disable PPI channel 7. */ -#define PPI_CHENCLR_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHENCLR_CH7_Msk (0x1UL << PPI_CHENCLR_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHENCLR_CH7_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH7_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH7_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 6 : Disable PPI channel 6. */ -#define PPI_CHENCLR_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHENCLR_CH6_Msk (0x1UL << PPI_CHENCLR_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHENCLR_CH6_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH6_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH6_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 5 : Disable PPI channel 5. */ -#define PPI_CHENCLR_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHENCLR_CH5_Msk (0x1UL << PPI_CHENCLR_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHENCLR_CH5_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH5_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH5_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 4 : Disable PPI channel 4. */ -#define PPI_CHENCLR_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHENCLR_CH4_Msk (0x1UL << PPI_CHENCLR_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHENCLR_CH4_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH4_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH4_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 3 : Disable PPI channel 3. */ -#define PPI_CHENCLR_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHENCLR_CH3_Msk (0x1UL << PPI_CHENCLR_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHENCLR_CH3_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH3_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH3_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 2 : Disable PPI channel 2. */ -#define PPI_CHENCLR_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHENCLR_CH2_Msk (0x1UL << PPI_CHENCLR_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHENCLR_CH2_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH2_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH2_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 1 : Disable PPI channel 1. */ -#define PPI_CHENCLR_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHENCLR_CH1_Msk (0x1UL << PPI_CHENCLR_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHENCLR_CH1_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH1_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH1_Clear (1UL) /*!< Disable channel on write. */ - -/* Bit 0 : Disable PPI channel 0. */ -#define PPI_CHENCLR_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHENCLR_CH0_Msk (0x1UL << PPI_CHENCLR_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHENCLR_CH0_Disabled (0UL) /*!< Channel disabled. */ -#define PPI_CHENCLR_CH0_Enabled (1UL) /*!< Channel enabled. */ -#define PPI_CHENCLR_CH0_Clear (1UL) /*!< Disable channel on write. */ - -/* Register: PPI_CHG */ -/* Description: Channel group configuration. */ - -/* Bit 31 : Include CH31 in channel group. */ -#define PPI_CHG_CH31_Pos (31UL) /*!< Position of CH31 field. */ -#define PPI_CHG_CH31_Msk (0x1UL << PPI_CHG_CH31_Pos) /*!< Bit mask of CH31 field. */ -#define PPI_CHG_CH31_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH31_Included (1UL) /*!< Channel included. */ - -/* Bit 30 : Include CH30 in channel group. */ -#define PPI_CHG_CH30_Pos (30UL) /*!< Position of CH30 field. */ -#define PPI_CHG_CH30_Msk (0x1UL << PPI_CHG_CH30_Pos) /*!< Bit mask of CH30 field. */ -#define PPI_CHG_CH30_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH30_Included (1UL) /*!< Channel included. */ - -/* Bit 29 : Include CH29 in channel group. */ -#define PPI_CHG_CH29_Pos (29UL) /*!< Position of CH29 field. */ -#define PPI_CHG_CH29_Msk (0x1UL << PPI_CHG_CH29_Pos) /*!< Bit mask of CH29 field. */ -#define PPI_CHG_CH29_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH29_Included (1UL) /*!< Channel included. */ - -/* Bit 28 : Include CH28 in channel group. */ -#define PPI_CHG_CH28_Pos (28UL) /*!< Position of CH28 field. */ -#define PPI_CHG_CH28_Msk (0x1UL << PPI_CHG_CH28_Pos) /*!< Bit mask of CH28 field. */ -#define PPI_CHG_CH28_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH28_Included (1UL) /*!< Channel included. */ - -/* Bit 27 : Include CH27 in channel group. */ -#define PPI_CHG_CH27_Pos (27UL) /*!< Position of CH27 field. */ -#define PPI_CHG_CH27_Msk (0x1UL << PPI_CHG_CH27_Pos) /*!< Bit mask of CH27 field. */ -#define PPI_CHG_CH27_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH27_Included (1UL) /*!< Channel included. */ - -/* Bit 26 : Include CH26 in channel group. */ -#define PPI_CHG_CH26_Pos (26UL) /*!< Position of CH26 field. */ -#define PPI_CHG_CH26_Msk (0x1UL << PPI_CHG_CH26_Pos) /*!< Bit mask of CH26 field. */ -#define PPI_CHG_CH26_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH26_Included (1UL) /*!< Channel included. */ - -/* Bit 25 : Include CH25 in channel group. */ -#define PPI_CHG_CH25_Pos (25UL) /*!< Position of CH25 field. */ -#define PPI_CHG_CH25_Msk (0x1UL << PPI_CHG_CH25_Pos) /*!< Bit mask of CH25 field. */ -#define PPI_CHG_CH25_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH25_Included (1UL) /*!< Channel included. */ - -/* Bit 24 : Include CH24 in channel group. */ -#define PPI_CHG_CH24_Pos (24UL) /*!< Position of CH24 field. */ -#define PPI_CHG_CH24_Msk (0x1UL << PPI_CHG_CH24_Pos) /*!< Bit mask of CH24 field. */ -#define PPI_CHG_CH24_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH24_Included (1UL) /*!< Channel included. */ - -/* Bit 23 : Include CH23 in channel group. */ -#define PPI_CHG_CH23_Pos (23UL) /*!< Position of CH23 field. */ -#define PPI_CHG_CH23_Msk (0x1UL << PPI_CHG_CH23_Pos) /*!< Bit mask of CH23 field. */ -#define PPI_CHG_CH23_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH23_Included (1UL) /*!< Channel included. */ - -/* Bit 22 : Include CH22 in channel group. */ -#define PPI_CHG_CH22_Pos (22UL) /*!< Position of CH22 field. */ -#define PPI_CHG_CH22_Msk (0x1UL << PPI_CHG_CH22_Pos) /*!< Bit mask of CH22 field. */ -#define PPI_CHG_CH22_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH22_Included (1UL) /*!< Channel included. */ - -/* Bit 21 : Include CH21 in channel group. */ -#define PPI_CHG_CH21_Pos (21UL) /*!< Position of CH21 field. */ -#define PPI_CHG_CH21_Msk (0x1UL << PPI_CHG_CH21_Pos) /*!< Bit mask of CH21 field. */ -#define PPI_CHG_CH21_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH21_Included (1UL) /*!< Channel included. */ - -/* Bit 20 : Include CH20 in channel group. */ -#define PPI_CHG_CH20_Pos (20UL) /*!< Position of CH20 field. */ -#define PPI_CHG_CH20_Msk (0x1UL << PPI_CHG_CH20_Pos) /*!< Bit mask of CH20 field. */ -#define PPI_CHG_CH20_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH20_Included (1UL) /*!< Channel included. */ - -/* Bit 15 : Include CH15 in channel group. */ -#define PPI_CHG_CH15_Pos (15UL) /*!< Position of CH15 field. */ -#define PPI_CHG_CH15_Msk (0x1UL << PPI_CHG_CH15_Pos) /*!< Bit mask of CH15 field. */ -#define PPI_CHG_CH15_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH15_Included (1UL) /*!< Channel included. */ - -/* Bit 14 : Include CH14 in channel group. */ -#define PPI_CHG_CH14_Pos (14UL) /*!< Position of CH14 field. */ -#define PPI_CHG_CH14_Msk (0x1UL << PPI_CHG_CH14_Pos) /*!< Bit mask of CH14 field. */ -#define PPI_CHG_CH14_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH14_Included (1UL) /*!< Channel included. */ - -/* Bit 13 : Include CH13 in channel group. */ -#define PPI_CHG_CH13_Pos (13UL) /*!< Position of CH13 field. */ -#define PPI_CHG_CH13_Msk (0x1UL << PPI_CHG_CH13_Pos) /*!< Bit mask of CH13 field. */ -#define PPI_CHG_CH13_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH13_Included (1UL) /*!< Channel included. */ - -/* Bit 12 : Include CH12 in channel group. */ -#define PPI_CHG_CH12_Pos (12UL) /*!< Position of CH12 field. */ -#define PPI_CHG_CH12_Msk (0x1UL << PPI_CHG_CH12_Pos) /*!< Bit mask of CH12 field. */ -#define PPI_CHG_CH12_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH12_Included (1UL) /*!< Channel included. */ - -/* Bit 11 : Include CH11 in channel group. */ -#define PPI_CHG_CH11_Pos (11UL) /*!< Position of CH11 field. */ -#define PPI_CHG_CH11_Msk (0x1UL << PPI_CHG_CH11_Pos) /*!< Bit mask of CH11 field. */ -#define PPI_CHG_CH11_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH11_Included (1UL) /*!< Channel included. */ - -/* Bit 10 : Include CH10 in channel group. */ -#define PPI_CHG_CH10_Pos (10UL) /*!< Position of CH10 field. */ -#define PPI_CHG_CH10_Msk (0x1UL << PPI_CHG_CH10_Pos) /*!< Bit mask of CH10 field. */ -#define PPI_CHG_CH10_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH10_Included (1UL) /*!< Channel included. */ - -/* Bit 9 : Include CH9 in channel group. */ -#define PPI_CHG_CH9_Pos (9UL) /*!< Position of CH9 field. */ -#define PPI_CHG_CH9_Msk (0x1UL << PPI_CHG_CH9_Pos) /*!< Bit mask of CH9 field. */ -#define PPI_CHG_CH9_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH9_Included (1UL) /*!< Channel included. */ - -/* Bit 8 : Include CH8 in channel group. */ -#define PPI_CHG_CH8_Pos (8UL) /*!< Position of CH8 field. */ -#define PPI_CHG_CH8_Msk (0x1UL << PPI_CHG_CH8_Pos) /*!< Bit mask of CH8 field. */ -#define PPI_CHG_CH8_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH8_Included (1UL) /*!< Channel included. */ - -/* Bit 7 : Include CH7 in channel group. */ -#define PPI_CHG_CH7_Pos (7UL) /*!< Position of CH7 field. */ -#define PPI_CHG_CH7_Msk (0x1UL << PPI_CHG_CH7_Pos) /*!< Bit mask of CH7 field. */ -#define PPI_CHG_CH7_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH7_Included (1UL) /*!< Channel included. */ - -/* Bit 6 : Include CH6 in channel group. */ -#define PPI_CHG_CH6_Pos (6UL) /*!< Position of CH6 field. */ -#define PPI_CHG_CH6_Msk (0x1UL << PPI_CHG_CH6_Pos) /*!< Bit mask of CH6 field. */ -#define PPI_CHG_CH6_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH6_Included (1UL) /*!< Channel included. */ - -/* Bit 5 : Include CH5 in channel group. */ -#define PPI_CHG_CH5_Pos (5UL) /*!< Position of CH5 field. */ -#define PPI_CHG_CH5_Msk (0x1UL << PPI_CHG_CH5_Pos) /*!< Bit mask of CH5 field. */ -#define PPI_CHG_CH5_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH5_Included (1UL) /*!< Channel included. */ - -/* Bit 4 : Include CH4 in channel group. */ -#define PPI_CHG_CH4_Pos (4UL) /*!< Position of CH4 field. */ -#define PPI_CHG_CH4_Msk (0x1UL << PPI_CHG_CH4_Pos) /*!< Bit mask of CH4 field. */ -#define PPI_CHG_CH4_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH4_Included (1UL) /*!< Channel included. */ - -/* Bit 3 : Include CH3 in channel group. */ -#define PPI_CHG_CH3_Pos (3UL) /*!< Position of CH3 field. */ -#define PPI_CHG_CH3_Msk (0x1UL << PPI_CHG_CH3_Pos) /*!< Bit mask of CH3 field. */ -#define PPI_CHG_CH3_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH3_Included (1UL) /*!< Channel included. */ - -/* Bit 2 : Include CH2 in channel group. */ -#define PPI_CHG_CH2_Pos (2UL) /*!< Position of CH2 field. */ -#define PPI_CHG_CH2_Msk (0x1UL << PPI_CHG_CH2_Pos) /*!< Bit mask of CH2 field. */ -#define PPI_CHG_CH2_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH2_Included (1UL) /*!< Channel included. */ - -/* Bit 1 : Include CH1 in channel group. */ -#define PPI_CHG_CH1_Pos (1UL) /*!< Position of CH1 field. */ -#define PPI_CHG_CH1_Msk (0x1UL << PPI_CHG_CH1_Pos) /*!< Bit mask of CH1 field. */ -#define PPI_CHG_CH1_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH1_Included (1UL) /*!< Channel included. */ - -/* Bit 0 : Include CH0 in channel group. */ -#define PPI_CHG_CH0_Pos (0UL) /*!< Position of CH0 field. */ -#define PPI_CHG_CH0_Msk (0x1UL << PPI_CHG_CH0_Pos) /*!< Bit mask of CH0 field. */ -#define PPI_CHG_CH0_Excluded (0UL) /*!< Channel excluded. */ -#define PPI_CHG_CH0_Included (1UL) /*!< Channel included. */ - - -/* Peripheral: PU */ -/* Description: Patch unit. */ - -/* Register: PU_PATCHADDR */ -/* Description: Relative address of patch instructions. */ - -/* Bits 24..0 : Relative address of patch instructions. */ -#define PU_PATCHADDR_PATCHADDR_Pos (0UL) /*!< Position of PATCHADDR field. */ -#define PU_PATCHADDR_PATCHADDR_Msk (0x1FFFFFFUL << PU_PATCHADDR_PATCHADDR_Pos) /*!< Bit mask of PATCHADDR field. */ - -/* Register: PU_PATCHEN */ -/* Description: Patch enable register. */ - -/* Bit 7 : Patch 7 enabled. */ -#define PU_PATCHEN_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ -#define PU_PATCHEN_PATCH7_Msk (0x1UL << PU_PATCHEN_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ -#define PU_PATCHEN_PATCH7_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH7_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 6 : Patch 6 enabled. */ -#define PU_PATCHEN_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ -#define PU_PATCHEN_PATCH6_Msk (0x1UL << PU_PATCHEN_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ -#define PU_PATCHEN_PATCH6_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH6_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 5 : Patch 5 enabled. */ -#define PU_PATCHEN_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ -#define PU_PATCHEN_PATCH5_Msk (0x1UL << PU_PATCHEN_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ -#define PU_PATCHEN_PATCH5_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH5_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 4 : Patch 4 enabled. */ -#define PU_PATCHEN_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ -#define PU_PATCHEN_PATCH4_Msk (0x1UL << PU_PATCHEN_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ -#define PU_PATCHEN_PATCH4_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH4_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 3 : Patch 3 enabled. */ -#define PU_PATCHEN_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ -#define PU_PATCHEN_PATCH3_Msk (0x1UL << PU_PATCHEN_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ -#define PU_PATCHEN_PATCH3_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH3_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 2 : Patch 2 enabled. */ -#define PU_PATCHEN_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ -#define PU_PATCHEN_PATCH2_Msk (0x1UL << PU_PATCHEN_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ -#define PU_PATCHEN_PATCH2_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH2_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 1 : Patch 1 enabled. */ -#define PU_PATCHEN_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ -#define PU_PATCHEN_PATCH1_Msk (0x1UL << PU_PATCHEN_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ -#define PU_PATCHEN_PATCH1_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH1_Enabled (1UL) /*!< Patch enabled. */ - -/* Bit 0 : Patch 0 enabled. */ -#define PU_PATCHEN_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ -#define PU_PATCHEN_PATCH0_Msk (0x1UL << PU_PATCHEN_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ -#define PU_PATCHEN_PATCH0_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHEN_PATCH0_Enabled (1UL) /*!< Patch enabled. */ - -/* Register: PU_PATCHENSET */ -/* Description: Patch enable register. */ - -/* Bit 7 : Patch 7 enabled. */ -#define PU_PATCHENSET_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ -#define PU_PATCHENSET_PATCH7_Msk (0x1UL << PU_PATCHENSET_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ -#define PU_PATCHENSET_PATCH7_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH7_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH7_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 6 : Patch 6 enabled. */ -#define PU_PATCHENSET_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ -#define PU_PATCHENSET_PATCH6_Msk (0x1UL << PU_PATCHENSET_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ -#define PU_PATCHENSET_PATCH6_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH6_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH6_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 5 : Patch 5 enabled. */ -#define PU_PATCHENSET_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ -#define PU_PATCHENSET_PATCH5_Msk (0x1UL << PU_PATCHENSET_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ -#define PU_PATCHENSET_PATCH5_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH5_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH5_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 4 : Patch 4 enabled. */ -#define PU_PATCHENSET_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ -#define PU_PATCHENSET_PATCH4_Msk (0x1UL << PU_PATCHENSET_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ -#define PU_PATCHENSET_PATCH4_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH4_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH4_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 3 : Patch 3 enabled. */ -#define PU_PATCHENSET_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ -#define PU_PATCHENSET_PATCH3_Msk (0x1UL << PU_PATCHENSET_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ -#define PU_PATCHENSET_PATCH3_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH3_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH3_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 2 : Patch 2 enabled. */ -#define PU_PATCHENSET_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ -#define PU_PATCHENSET_PATCH2_Msk (0x1UL << PU_PATCHENSET_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ -#define PU_PATCHENSET_PATCH2_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH2_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH2_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 1 : Patch 1 enabled. */ -#define PU_PATCHENSET_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ -#define PU_PATCHENSET_PATCH1_Msk (0x1UL << PU_PATCHENSET_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ -#define PU_PATCHENSET_PATCH1_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH1_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH1_Set (1UL) /*!< Enable patch on write. */ - -/* Bit 0 : Patch 0 enabled. */ -#define PU_PATCHENSET_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ -#define PU_PATCHENSET_PATCH0_Msk (0x1UL << PU_PATCHENSET_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ -#define PU_PATCHENSET_PATCH0_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENSET_PATCH0_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENSET_PATCH0_Set (1UL) /*!< Enable patch on write. */ - -/* Register: PU_PATCHENCLR */ -/* Description: Patch disable register. */ - -/* Bit 7 : Patch 7 enabled. */ -#define PU_PATCHENCLR_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ -#define PU_PATCHENCLR_PATCH7_Msk (0x1UL << PU_PATCHENCLR_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ -#define PU_PATCHENCLR_PATCH7_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH7_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH7_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 6 : Patch 6 enabled. */ -#define PU_PATCHENCLR_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ -#define PU_PATCHENCLR_PATCH6_Msk (0x1UL << PU_PATCHENCLR_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ -#define PU_PATCHENCLR_PATCH6_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH6_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH6_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 5 : Patch 5 enabled. */ -#define PU_PATCHENCLR_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ -#define PU_PATCHENCLR_PATCH5_Msk (0x1UL << PU_PATCHENCLR_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ -#define PU_PATCHENCLR_PATCH5_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH5_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH5_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 4 : Patch 4 enabled. */ -#define PU_PATCHENCLR_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ -#define PU_PATCHENCLR_PATCH4_Msk (0x1UL << PU_PATCHENCLR_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ -#define PU_PATCHENCLR_PATCH4_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH4_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH4_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 3 : Patch 3 enabled. */ -#define PU_PATCHENCLR_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ -#define PU_PATCHENCLR_PATCH3_Msk (0x1UL << PU_PATCHENCLR_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ -#define PU_PATCHENCLR_PATCH3_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH3_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH3_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 2 : Patch 2 enabled. */ -#define PU_PATCHENCLR_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ -#define PU_PATCHENCLR_PATCH2_Msk (0x1UL << PU_PATCHENCLR_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ -#define PU_PATCHENCLR_PATCH2_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH2_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH2_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 1 : Patch 1 enabled. */ -#define PU_PATCHENCLR_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ -#define PU_PATCHENCLR_PATCH1_Msk (0x1UL << PU_PATCHENCLR_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ -#define PU_PATCHENCLR_PATCH1_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH1_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH1_Clear (1UL) /*!< Disable patch on write. */ - -/* Bit 0 : Patch 0 enabled. */ -#define PU_PATCHENCLR_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ -#define PU_PATCHENCLR_PATCH0_Msk (0x1UL << PU_PATCHENCLR_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ -#define PU_PATCHENCLR_PATCH0_Disabled (0UL) /*!< Patch disabled. */ -#define PU_PATCHENCLR_PATCH0_Enabled (1UL) /*!< Patch enabled. */ -#define PU_PATCHENCLR_PATCH0_Clear (1UL) /*!< Disable patch on write. */ - - -/* Peripheral: QDEC */ -/* Description: Rotary decoder. */ - -/* Register: QDEC_SHORTS */ -/* Description: Shortcuts for the QDEC. */ - -/* Bit 1 : Shortcut between SAMPLERDY event and STOP task. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Pos (1UL) /*!< Position of SAMPLERDY_STOP field. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Msk (0x1UL << QDEC_SHORTS_SAMPLERDY_STOP_Pos) /*!< Bit mask of SAMPLERDY_STOP field. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define QDEC_SHORTS_SAMPLERDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between REPORTRDY event and READCLRACC task. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Pos (0UL) /*!< Position of REPORTRDY_READCLRACC field. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_READCLRACC_Pos) /*!< Bit mask of REPORTRDY_READCLRACC field. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Disabled (0UL) /*!< Shortcut disabled. */ -#define QDEC_SHORTS_REPORTRDY_READCLRACC_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: QDEC_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on ACCOF event. */ -#define QDEC_INTENSET_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ -#define QDEC_INTENSET_ACCOF_Msk (0x1UL << QDEC_INTENSET_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ -#define QDEC_INTENSET_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENSET_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENSET_ACCOF_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on REPORTRDY event. */ -#define QDEC_INTENSET_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ -#define QDEC_INTENSET_REPORTRDY_Msk (0x1UL << QDEC_INTENSET_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ -#define QDEC_INTENSET_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENSET_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENSET_REPORTRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on SAMPLERDY event. */ -#define QDEC_INTENSET_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ -#define QDEC_INTENSET_SAMPLERDY_Msk (0x1UL << QDEC_INTENSET_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ -#define QDEC_INTENSET_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENSET_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENSET_SAMPLERDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: QDEC_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on ACCOF event. */ -#define QDEC_INTENCLR_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ -#define QDEC_INTENCLR_ACCOF_Msk (0x1UL << QDEC_INTENCLR_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ -#define QDEC_INTENCLR_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENCLR_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENCLR_ACCOF_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on REPORTRDY event. */ -#define QDEC_INTENCLR_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ -#define QDEC_INTENCLR_REPORTRDY_Msk (0x1UL << QDEC_INTENCLR_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ -#define QDEC_INTENCLR_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENCLR_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENCLR_REPORTRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on SAMPLERDY event. */ -#define QDEC_INTENCLR_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ -#define QDEC_INTENCLR_SAMPLERDY_Msk (0x1UL << QDEC_INTENCLR_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ -#define QDEC_INTENCLR_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define QDEC_INTENCLR_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define QDEC_INTENCLR_SAMPLERDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: QDEC_ENABLE */ -/* Description: Enable the QDEC. */ - -/* Bit 0 : Enable or disable QDEC. */ -#define QDEC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define QDEC_ENABLE_ENABLE_Msk (0x1UL << QDEC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define QDEC_ENABLE_ENABLE_Disabled (0UL) /*!< Disabled QDEC. */ -#define QDEC_ENABLE_ENABLE_Enabled (1UL) /*!< Enable QDEC. */ - -/* Register: QDEC_LEDPOL */ -/* Description: LED output pin polarity. */ - -/* Bit 0 : LED output pin polarity. */ -#define QDEC_LEDPOL_LEDPOL_Pos (0UL) /*!< Position of LEDPOL field. */ -#define QDEC_LEDPOL_LEDPOL_Msk (0x1UL << QDEC_LEDPOL_LEDPOL_Pos) /*!< Bit mask of LEDPOL field. */ -#define QDEC_LEDPOL_LEDPOL_ActiveLow (0UL) /*!< LED output is active low. */ -#define QDEC_LEDPOL_LEDPOL_ActiveHigh (1UL) /*!< LED output is active high. */ - -/* Register: QDEC_SAMPLEPER */ -/* Description: Sample period. */ - -/* Bits 2..0 : Sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_Pos (0UL) /*!< Position of SAMPLEPER field. */ -#define QDEC_SAMPLEPER_SAMPLEPER_Msk (0x7UL << QDEC_SAMPLEPER_SAMPLEPER_Pos) /*!< Bit mask of SAMPLEPER field. */ -#define QDEC_SAMPLEPER_SAMPLEPER_128us (0x00UL) /*!< 128us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_256us (0x01UL) /*!< 256us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_512us (0x02UL) /*!< 512us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_1024us (0x03UL) /*!< 1024us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_2048us (0x04UL) /*!< 2048us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_4096us (0x05UL) /*!< 4096us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_8192us (0x06UL) /*!< 8192us sample period. */ -#define QDEC_SAMPLEPER_SAMPLEPER_16384us (0x07UL) /*!< 16384us sample period. */ - -/* Register: QDEC_SAMPLE */ -/* Description: Motion sample value. */ - -/* Bits 31..0 : Last sample taken in compliment to 2. */ -#define QDEC_SAMPLE_SAMPLE_Pos (0UL) /*!< Position of SAMPLE field. */ -#define QDEC_SAMPLE_SAMPLE_Msk (0xFFFFFFFFUL << QDEC_SAMPLE_SAMPLE_Pos) /*!< Bit mask of SAMPLE field. */ - -/* Register: QDEC_REPORTPER */ -/* Description: Number of samples to generate an EVENT_REPORTRDY. */ - -/* Bits 2..0 : Number of samples to generate an EVENT_REPORTRDY. */ -#define QDEC_REPORTPER_REPORTPER_Pos (0UL) /*!< Position of REPORTPER field. */ -#define QDEC_REPORTPER_REPORTPER_Msk (0x7UL << QDEC_REPORTPER_REPORTPER_Pos) /*!< Bit mask of REPORTPER field. */ -#define QDEC_REPORTPER_REPORTPER_10Smpl (0x00UL) /*!< 10 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_40Smpl (0x01UL) /*!< 40 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_80Smpl (0x02UL) /*!< 80 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_120Smpl (0x03UL) /*!< 120 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_160Smpl (0x04UL) /*!< 160 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_200Smpl (0x05UL) /*!< 200 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_240Smpl (0x06UL) /*!< 240 samples per report. */ -#define QDEC_REPORTPER_REPORTPER_280Smpl (0x07UL) /*!< 280 samples per report. */ - -/* Register: QDEC_DBFEN */ -/* Description: Enable debouncer input filters. */ - -/* Bit 0 : Enable debounce input filters. */ -#define QDEC_DBFEN_DBFEN_Pos (0UL) /*!< Position of DBFEN field. */ -#define QDEC_DBFEN_DBFEN_Msk (0x1UL << QDEC_DBFEN_DBFEN_Pos) /*!< Bit mask of DBFEN field. */ -#define QDEC_DBFEN_DBFEN_Disabled (0UL) /*!< Debounce input filters disabled. */ -#define QDEC_DBFEN_DBFEN_Enabled (1UL) /*!< Debounce input filters enabled. */ - -/* Register: QDEC_LEDPRE */ -/* Description: Time LED is switched ON before the sample. */ - -/* Bits 8..0 : Period in us the LED in switched on prior to sampling. */ -#define QDEC_LEDPRE_LEDPRE_Pos (0UL) /*!< Position of LEDPRE field. */ -#define QDEC_LEDPRE_LEDPRE_Msk (0x1FFUL << QDEC_LEDPRE_LEDPRE_Pos) /*!< Bit mask of LEDPRE field. */ - -/* Register: QDEC_ACCDBL */ -/* Description: Accumulated double (error) transitions register. */ - -/* Bits 3..0 : Accumulated double (error) transitions. */ -#define QDEC_ACCDBL_ACCDBL_Pos (0UL) /*!< Position of ACCDBL field. */ -#define QDEC_ACCDBL_ACCDBL_Msk (0xFUL << QDEC_ACCDBL_ACCDBL_Pos) /*!< Bit mask of ACCDBL field. */ - -/* Register: QDEC_ACCDBLREAD */ -/* Description: Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC task. */ - -/* Bits 3..0 : Snapshot of accumulated double (error) transitions. */ -#define QDEC_ACCDBLREAD_ACCDBLREAD_Pos (0UL) /*!< Position of ACCDBLREAD field. */ -#define QDEC_ACCDBLREAD_ACCDBLREAD_Msk (0xFUL << QDEC_ACCDBLREAD_ACCDBLREAD_Pos) /*!< Bit mask of ACCDBLREAD field. */ - -/* Register: QDEC_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define QDEC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define QDEC_POWER_POWER_Msk (0x1UL << QDEC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define QDEC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define QDEC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: RADIO */ -/* Description: The radio. */ - -/* Register: RADIO_SHORTS */ -/* Description: Shortcuts for the radio. */ - -/* Bit 8 : Shortcut between DISABLED event and RSSISTOP task. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Pos (8UL) /*!< Position of DISABLED_RSSISTOP field. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Msk (0x1UL << RADIO_SHORTS_DISABLED_RSSISTOP_Pos) /*!< Bit mask of DISABLED_RSSISTOP field. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_DISABLED_RSSISTOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 6 : Shortcut between ADDRESS event and BCSTART task. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Pos (6UL) /*!< Position of ADDRESS_BCSTART field. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_BCSTART_Pos) /*!< Bit mask of ADDRESS_BCSTART field. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_ADDRESS_BCSTART_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 5 : Shortcut between END event and START task. */ -#define RADIO_SHORTS_END_START_Pos (5UL) /*!< Position of END_START field. */ -#define RADIO_SHORTS_END_START_Msk (0x1UL << RADIO_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */ -#define RADIO_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 4 : Shortcut between ADDRESS event and RSSISTART task. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Pos (4UL) /*!< Position of ADDRESS_RSSISTART field. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_RSSISTART_Pos) /*!< Bit mask of ADDRESS_RSSISTART field. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_ADDRESS_RSSISTART_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between DISABLED event and RXEN task. */ -#define RADIO_SHORTS_DISABLED_RXEN_Pos (3UL) /*!< Position of DISABLED_RXEN field. */ -#define RADIO_SHORTS_DISABLED_RXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_RXEN_Pos) /*!< Bit mask of DISABLED_RXEN field. */ -#define RADIO_SHORTS_DISABLED_RXEN_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_DISABLED_RXEN_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 2 : Shortcut between DISABLED event and TXEN task. */ -#define RADIO_SHORTS_DISABLED_TXEN_Pos (2UL) /*!< Position of DISABLED_TXEN field. */ -#define RADIO_SHORTS_DISABLED_TXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_TXEN_Pos) /*!< Bit mask of DISABLED_TXEN field. */ -#define RADIO_SHORTS_DISABLED_TXEN_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_DISABLED_TXEN_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 1 : Shortcut between END event and DISABLE task. */ -#define RADIO_SHORTS_END_DISABLE_Pos (1UL) /*!< Position of END_DISABLE field. */ -#define RADIO_SHORTS_END_DISABLE_Msk (0x1UL << RADIO_SHORTS_END_DISABLE_Pos) /*!< Bit mask of END_DISABLE field. */ -#define RADIO_SHORTS_END_DISABLE_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_END_DISABLE_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between READY event and START task. */ -#define RADIO_SHORTS_READY_START_Pos (0UL) /*!< Position of READY_START field. */ -#define RADIO_SHORTS_READY_START_Msk (0x1UL << RADIO_SHORTS_READY_START_Pos) /*!< Bit mask of READY_START field. */ -#define RADIO_SHORTS_READY_START_Disabled (0UL) /*!< Shortcut disabled. */ -#define RADIO_SHORTS_READY_START_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: RADIO_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 10 : Enable interrupt on BCMATCH event. */ -#define RADIO_INTENSET_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ -#define RADIO_INTENSET_BCMATCH_Msk (0x1UL << RADIO_INTENSET_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ -#define RADIO_INTENSET_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_BCMATCH_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 7 : Enable interrupt on RSSIEND event. */ -#define RADIO_INTENSET_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ -#define RADIO_INTENSET_RSSIEND_Msk (0x1UL << RADIO_INTENSET_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ -#define RADIO_INTENSET_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_RSSIEND_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 6 : Enable interrupt on DEVMISS event. */ -#define RADIO_INTENSET_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ -#define RADIO_INTENSET_DEVMISS_Msk (0x1UL << RADIO_INTENSET_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ -#define RADIO_INTENSET_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_DEVMISS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 5 : Enable interrupt on DEVMATCH event. */ -#define RADIO_INTENSET_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ -#define RADIO_INTENSET_DEVMATCH_Msk (0x1UL << RADIO_INTENSET_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ -#define RADIO_INTENSET_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_DEVMATCH_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 4 : Enable interrupt on DISABLED event. */ -#define RADIO_INTENSET_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ -#define RADIO_INTENSET_DISABLED_Msk (0x1UL << RADIO_INTENSET_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ -#define RADIO_INTENSET_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_DISABLED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 3 : Enable interrupt on END event. */ -#define RADIO_INTENSET_END_Pos (3UL) /*!< Position of END field. */ -#define RADIO_INTENSET_END_Msk (0x1UL << RADIO_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define RADIO_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on PAYLOAD event. */ -#define RADIO_INTENSET_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ -#define RADIO_INTENSET_PAYLOAD_Msk (0x1UL << RADIO_INTENSET_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ -#define RADIO_INTENSET_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_PAYLOAD_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on ADDRESS event. */ -#define RADIO_INTENSET_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ -#define RADIO_INTENSET_ADDRESS_Msk (0x1UL << RADIO_INTENSET_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ -#define RADIO_INTENSET_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_ADDRESS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on READY event. */ -#define RADIO_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ -#define RADIO_INTENSET_READY_Msk (0x1UL << RADIO_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ -#define RADIO_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: RADIO_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 10 : Disable interrupt on BCMATCH event. */ -#define RADIO_INTENCLR_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ -#define RADIO_INTENCLR_BCMATCH_Msk (0x1UL << RADIO_INTENCLR_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ -#define RADIO_INTENCLR_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_BCMATCH_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 7 : Disable interrupt on RSSIEND event. */ -#define RADIO_INTENCLR_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ -#define RADIO_INTENCLR_RSSIEND_Msk (0x1UL << RADIO_INTENCLR_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ -#define RADIO_INTENCLR_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_RSSIEND_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 6 : Disable interrupt on DEVMISS event. */ -#define RADIO_INTENCLR_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ -#define RADIO_INTENCLR_DEVMISS_Msk (0x1UL << RADIO_INTENCLR_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ -#define RADIO_INTENCLR_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_DEVMISS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 5 : Disable interrupt on DEVMATCH event. */ -#define RADIO_INTENCLR_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ -#define RADIO_INTENCLR_DEVMATCH_Msk (0x1UL << RADIO_INTENCLR_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ -#define RADIO_INTENCLR_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_DEVMATCH_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 4 : Disable interrupt on DISABLED event. */ -#define RADIO_INTENCLR_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ -#define RADIO_INTENCLR_DISABLED_Msk (0x1UL << RADIO_INTENCLR_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ -#define RADIO_INTENCLR_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_DISABLED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 3 : Disable interrupt on END event. */ -#define RADIO_INTENCLR_END_Pos (3UL) /*!< Position of END field. */ -#define RADIO_INTENCLR_END_Msk (0x1UL << RADIO_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define RADIO_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on PAYLOAD event. */ -#define RADIO_INTENCLR_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ -#define RADIO_INTENCLR_PAYLOAD_Msk (0x1UL << RADIO_INTENCLR_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ -#define RADIO_INTENCLR_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_PAYLOAD_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on ADDRESS event. */ -#define RADIO_INTENCLR_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ -#define RADIO_INTENCLR_ADDRESS_Msk (0x1UL << RADIO_INTENCLR_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ -#define RADIO_INTENCLR_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_ADDRESS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on READY event. */ -#define RADIO_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ -#define RADIO_INTENCLR_READY_Msk (0x1UL << RADIO_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ -#define RADIO_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RADIO_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RADIO_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: RADIO_CRCSTATUS */ -/* Description: CRC status of received packet. */ - -/* Bit 0 : CRC status of received packet. */ -#define RADIO_CRCSTATUS_CRCSTATUS_Pos (0UL) /*!< Position of CRCSTATUS field. */ -#define RADIO_CRCSTATUS_CRCSTATUS_Msk (0x1UL << RADIO_CRCSTATUS_CRCSTATUS_Pos) /*!< Bit mask of CRCSTATUS field. */ -#define RADIO_CRCSTATUS_CRCSTATUS_CRCError (0UL) /*!< Packet received with CRC error. */ -#define RADIO_CRCSTATUS_CRCSTATUS_CRCOk (1UL) /*!< Packet received with CRC ok. */ - -/* Register: RADIO_CD */ -/* Description: Carrier detect. */ - -/* Bit 0 : Carrier detect. */ -#define RADIO_CD_CD_Pos (0UL) /*!< Position of CD field. */ -#define RADIO_CD_CD_Msk (0x1UL << RADIO_CD_CD_Pos) /*!< Bit mask of CD field. */ - -/* Register: RADIO_RXMATCH */ -/* Description: Received address. */ - -/* Bits 2..0 : Logical address in which previous packet was received. */ -#define RADIO_RXMATCH_RXMATCH_Pos (0UL) /*!< Position of RXMATCH field. */ -#define RADIO_RXMATCH_RXMATCH_Msk (0x7UL << RADIO_RXMATCH_RXMATCH_Pos) /*!< Bit mask of RXMATCH field. */ - -/* Register: RADIO_RXCRC */ -/* Description: Received CRC. */ - -/* Bits 23..0 : CRC field of previously received packet. */ -#define RADIO_RXCRC_RXCRC_Pos (0UL) /*!< Position of RXCRC field. */ -#define RADIO_RXCRC_RXCRC_Msk (0xFFFFFFUL << RADIO_RXCRC_RXCRC_Pos) /*!< Bit mask of RXCRC field. */ - -/* Register: RADIO_DAI */ -/* Description: Device address match index. */ - -/* Bits 2..0 : Index (n) of device address (see DAB[n] and DAP[n]) that obtained an address match. */ -#define RADIO_DAI_DAI_Pos (0UL) /*!< Position of DAI field. */ -#define RADIO_DAI_DAI_Msk (0x7UL << RADIO_DAI_DAI_Pos) /*!< Bit mask of DAI field. */ - -/* Register: RADIO_FREQUENCY */ -/* Description: Frequency. */ - -/* Bits 6..0 : Radio channel frequency offset in MHz: RF Frequency = 2400 + FREQUENCY (MHz). Decision point: TXEN or RXEN task. */ -#define RADIO_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define RADIO_FREQUENCY_FREQUENCY_Msk (0x7FUL << RADIO_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ - -/* Register: RADIO_TXPOWER */ -/* Description: Output power. */ - -/* Bits 7..0 : Radio output power. Decision point: TXEN task. */ -#define RADIO_TXPOWER_TXPOWER_Pos (0UL) /*!< Position of TXPOWER field. */ -#define RADIO_TXPOWER_TXPOWER_Msk (0xFFUL << RADIO_TXPOWER_TXPOWER_Pos) /*!< Bit mask of TXPOWER field. */ -#define RADIO_TXPOWER_TXPOWER_0dBm (0x00UL) /*!< 0dBm. */ -#define RADIO_TXPOWER_TXPOWER_Pos4dBm (0x04UL) /*!< +4dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg30dBm (0xD8UL) /*!< -30dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg20dBm (0xECUL) /*!< -20dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg16dBm (0xF0UL) /*!< -16dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg12dBm (0xF4UL) /*!< -12dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg8dBm (0xF8UL) /*!< -8dBm. */ -#define RADIO_TXPOWER_TXPOWER_Neg4dBm (0xFCUL) /*!< -4dBm. */ - -/* Register: RADIO_MODE */ -/* Description: Data rate and modulation. */ - -/* Bits 1..0 : Radio data rate and modulation setting. Decision point: TXEN or RXEN task. */ -#define RADIO_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define RADIO_MODE_MODE_Msk (0x3UL << RADIO_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ -#define RADIO_MODE_MODE_Nrf_1Mbit (0x00UL) /*!< 1Mbit/s Nordic propietary radio mode. */ -#define RADIO_MODE_MODE_Nrf_2Mbit (0x01UL) /*!< 2Mbit/s Nordic propietary radio mode. */ -#define RADIO_MODE_MODE_Nrf_250Kbit (0x02UL) /*!< 250kbit/s Nordic propietary radio mode. */ -#define RADIO_MODE_MODE_Ble_1Mbit (0x03UL) /*!< 1Mbit/s Bluetooth Low Energy */ - -/* Register: RADIO_PCNF0 */ -/* Description: Packet configuration 0. */ - -/* Bits 19..16 : Length of S1 field in number of bits. Decision point: START task. */ -#define RADIO_PCNF0_S1LEN_Pos (16UL) /*!< Position of S1LEN field. */ -#define RADIO_PCNF0_S1LEN_Msk (0xFUL << RADIO_PCNF0_S1LEN_Pos) /*!< Bit mask of S1LEN field. */ - -/* Bit 8 : Length of S0 field in number of bytes. Decision point: START task. */ -#define RADIO_PCNF0_S0LEN_Pos (8UL) /*!< Position of S0LEN field. */ -#define RADIO_PCNF0_S0LEN_Msk (0x1UL << RADIO_PCNF0_S0LEN_Pos) /*!< Bit mask of S0LEN field. */ - -/* Bits 3..0 : Length of length field in number of bits. Decision point: START task. */ -#define RADIO_PCNF0_LFLEN_Pos (0UL) /*!< Position of LFLEN field. */ -#define RADIO_PCNF0_LFLEN_Msk (0xFUL << RADIO_PCNF0_LFLEN_Pos) /*!< Bit mask of LFLEN field. */ - -/* Register: RADIO_PCNF1 */ -/* Description: Packet configuration 1. */ - -/* Bit 25 : Packet whitening enable. */ -#define RADIO_PCNF1_WHITEEN_Pos (25UL) /*!< Position of WHITEEN field. */ -#define RADIO_PCNF1_WHITEEN_Msk (0x1UL << RADIO_PCNF1_WHITEEN_Pos) /*!< Bit mask of WHITEEN field. */ -#define RADIO_PCNF1_WHITEEN_Disabled (0UL) /*!< Whitening disabled. */ -#define RADIO_PCNF1_WHITEEN_Enabled (1UL) /*!< Whitening enabled. */ - -/* Bit 24 : On air endianness of packet length field. Decision point: START task. */ -#define RADIO_PCNF1_ENDIAN_Pos (24UL) /*!< Position of ENDIAN field. */ -#define RADIO_PCNF1_ENDIAN_Msk (0x1UL << RADIO_PCNF1_ENDIAN_Pos) /*!< Bit mask of ENDIAN field. */ -#define RADIO_PCNF1_ENDIAN_Little (0UL) /*!< Least significant bit on air first */ -#define RADIO_PCNF1_ENDIAN_Big (1UL) /*!< Most significant bit on air first */ - -/* Bits 18..16 : Base address length in number of bytes. Decision point: START task. */ -#define RADIO_PCNF1_BALEN_Pos (16UL) /*!< Position of BALEN field. */ -#define RADIO_PCNF1_BALEN_Msk (0x7UL << RADIO_PCNF1_BALEN_Pos) /*!< Bit mask of BALEN field. */ - -/* Bits 15..8 : Static length in number of bytes. Decision point: START task. */ -#define RADIO_PCNF1_STATLEN_Pos (8UL) /*!< Position of STATLEN field. */ -#define RADIO_PCNF1_STATLEN_Msk (0xFFUL << RADIO_PCNF1_STATLEN_Pos) /*!< Bit mask of STATLEN field. */ - -/* Bits 7..0 : Maximum length of packet payload in number of bytes. */ -#define RADIO_PCNF1_MAXLEN_Pos (0UL) /*!< Position of MAXLEN field. */ -#define RADIO_PCNF1_MAXLEN_Msk (0xFFUL << RADIO_PCNF1_MAXLEN_Pos) /*!< Bit mask of MAXLEN field. */ - -/* Register: RADIO_PREFIX0 */ -/* Description: Prefixes bytes for logical addresses 0 to 3. */ - -/* Bits 31..24 : Address prefix 3. Decision point: START task. */ -#define RADIO_PREFIX0_AP3_Pos (24UL) /*!< Position of AP3 field. */ -#define RADIO_PREFIX0_AP3_Msk (0xFFUL << RADIO_PREFIX0_AP3_Pos) /*!< Bit mask of AP3 field. */ - -/* Bits 23..16 : Address prefix 2. Decision point: START task. */ -#define RADIO_PREFIX0_AP2_Pos (16UL) /*!< Position of AP2 field. */ -#define RADIO_PREFIX0_AP2_Msk (0xFFUL << RADIO_PREFIX0_AP2_Pos) /*!< Bit mask of AP2 field. */ - -/* Bits 15..8 : Address prefix 1. Decision point: START task. */ -#define RADIO_PREFIX0_AP1_Pos (8UL) /*!< Position of AP1 field. */ -#define RADIO_PREFIX0_AP1_Msk (0xFFUL << RADIO_PREFIX0_AP1_Pos) /*!< Bit mask of AP1 field. */ - -/* Bits 7..0 : Address prefix 0. Decision point: START task. */ -#define RADIO_PREFIX0_AP0_Pos (0UL) /*!< Position of AP0 field. */ -#define RADIO_PREFIX0_AP0_Msk (0xFFUL << RADIO_PREFIX0_AP0_Pos) /*!< Bit mask of AP0 field. */ - -/* Register: RADIO_PREFIX1 */ -/* Description: Prefixes bytes for logical addresses 4 to 7. */ - -/* Bits 31..24 : Address prefix 7. Decision point: START task. */ -#define RADIO_PREFIX1_AP7_Pos (24UL) /*!< Position of AP7 field. */ -#define RADIO_PREFIX1_AP7_Msk (0xFFUL << RADIO_PREFIX1_AP7_Pos) /*!< Bit mask of AP7 field. */ - -/* Bits 23..16 : Address prefix 6. Decision point: START task. */ -#define RADIO_PREFIX1_AP6_Pos (16UL) /*!< Position of AP6 field. */ -#define RADIO_PREFIX1_AP6_Msk (0xFFUL << RADIO_PREFIX1_AP6_Pos) /*!< Bit mask of AP6 field. */ - -/* Bits 15..8 : Address prefix 5. Decision point: START task. */ -#define RADIO_PREFIX1_AP5_Pos (8UL) /*!< Position of AP5 field. */ -#define RADIO_PREFIX1_AP5_Msk (0xFFUL << RADIO_PREFIX1_AP5_Pos) /*!< Bit mask of AP5 field. */ - -/* Bits 7..0 : Address prefix 4. Decision point: START task. */ -#define RADIO_PREFIX1_AP4_Pos (0UL) /*!< Position of AP4 field. */ -#define RADIO_PREFIX1_AP4_Msk (0xFFUL << RADIO_PREFIX1_AP4_Pos) /*!< Bit mask of AP4 field. */ - -/* Register: RADIO_TXADDRESS */ -/* Description: Transmit address select. */ - -/* Bits 2..0 : Logical address to be used when transmitting a packet. Decision point: START task. */ -#define RADIO_TXADDRESS_TXADDRESS_Pos (0UL) /*!< Position of TXADDRESS field. */ -#define RADIO_TXADDRESS_TXADDRESS_Msk (0x7UL << RADIO_TXADDRESS_TXADDRESS_Pos) /*!< Bit mask of TXADDRESS field. */ - -/* Register: RADIO_RXADDRESSES */ -/* Description: Receive address select. */ - -/* Bit 7 : Enable reception on logical address 7. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR7_Pos (7UL) /*!< Position of ADDR7 field. */ -#define RADIO_RXADDRESSES_ADDR7_Msk (0x1UL << RADIO_RXADDRESSES_ADDR7_Pos) /*!< Bit mask of ADDR7 field. */ -#define RADIO_RXADDRESSES_ADDR7_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR7_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 6 : Enable reception on logical address 6. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR6_Pos (6UL) /*!< Position of ADDR6 field. */ -#define RADIO_RXADDRESSES_ADDR6_Msk (0x1UL << RADIO_RXADDRESSES_ADDR6_Pos) /*!< Bit mask of ADDR6 field. */ -#define RADIO_RXADDRESSES_ADDR6_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR6_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 5 : Enable reception on logical address 5. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR5_Pos (5UL) /*!< Position of ADDR5 field. */ -#define RADIO_RXADDRESSES_ADDR5_Msk (0x1UL << RADIO_RXADDRESSES_ADDR5_Pos) /*!< Bit mask of ADDR5 field. */ -#define RADIO_RXADDRESSES_ADDR5_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR5_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 4 : Enable reception on logical address 4. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR4_Pos (4UL) /*!< Position of ADDR4 field. */ -#define RADIO_RXADDRESSES_ADDR4_Msk (0x1UL << RADIO_RXADDRESSES_ADDR4_Pos) /*!< Bit mask of ADDR4 field. */ -#define RADIO_RXADDRESSES_ADDR4_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR4_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 3 : Enable reception on logical address 3. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR3_Pos (3UL) /*!< Position of ADDR3 field. */ -#define RADIO_RXADDRESSES_ADDR3_Msk (0x1UL << RADIO_RXADDRESSES_ADDR3_Pos) /*!< Bit mask of ADDR3 field. */ -#define RADIO_RXADDRESSES_ADDR3_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR3_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 2 : Enable reception on logical address 2. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR2_Pos (2UL) /*!< Position of ADDR2 field. */ -#define RADIO_RXADDRESSES_ADDR2_Msk (0x1UL << RADIO_RXADDRESSES_ADDR2_Pos) /*!< Bit mask of ADDR2 field. */ -#define RADIO_RXADDRESSES_ADDR2_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR2_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 1 : Enable reception on logical address 1. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR1_Pos (1UL) /*!< Position of ADDR1 field. */ -#define RADIO_RXADDRESSES_ADDR1_Msk (0x1UL << RADIO_RXADDRESSES_ADDR1_Pos) /*!< Bit mask of ADDR1 field. */ -#define RADIO_RXADDRESSES_ADDR1_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR1_Enabled (1UL) /*!< Reception enabled. */ - -/* Bit 0 : Enable reception on logical address 0. Decision point: START task. */ -#define RADIO_RXADDRESSES_ADDR0_Pos (0UL) /*!< Position of ADDR0 field. */ -#define RADIO_RXADDRESSES_ADDR0_Msk (0x1UL << RADIO_RXADDRESSES_ADDR0_Pos) /*!< Bit mask of ADDR0 field. */ -#define RADIO_RXADDRESSES_ADDR0_Disabled (0UL) /*!< Reception disabled. */ -#define RADIO_RXADDRESSES_ADDR0_Enabled (1UL) /*!< Reception enabled. */ - -/* Register: RADIO_CRCCNF */ -/* Description: CRC configuration. */ - -/* Bit 8 : Leave packet address field out of the CRC calculation. Decision point: START task. */ -#define RADIO_CRCCNF_SKIPADDR_Pos (8UL) /*!< Position of SKIPADDR field. */ -#define RADIO_CRCCNF_SKIPADDR_Msk (0x1UL << RADIO_CRCCNF_SKIPADDR_Pos) /*!< Bit mask of SKIPADDR field. */ -#define RADIO_CRCCNF_SKIPADDR_Include (0UL) /*!< Include packet address in CRC calculation. */ -#define RADIO_CRCCNF_SKIPADDR_Skip (1UL) /*!< Packet address is skipped in CRC calculation. The CRC calculation will start at the first byte after the address. */ - -/* Bits 1..0 : CRC length. Decision point: START task. */ -#define RADIO_CRCCNF_LEN_Pos (0UL) /*!< Position of LEN field. */ -#define RADIO_CRCCNF_LEN_Msk (0x3UL << RADIO_CRCCNF_LEN_Pos) /*!< Bit mask of LEN field. */ -#define RADIO_CRCCNF_LEN_Disabled (0UL) /*!< CRC calculation disabled. */ -#define RADIO_CRCCNF_LEN_One (1UL) /*!< One byte long CRC. */ -#define RADIO_CRCCNF_LEN_Two (2UL) /*!< Two bytes long CRC. */ -#define RADIO_CRCCNF_LEN_Three (3UL) /*!< Three bytes long CRC. */ - -/* Register: RADIO_CRCPOLY */ -/* Description: CRC polynomial. */ - -/* Bits 23..0 : CRC polynomial. Decision point: START task. */ -#define RADIO_CRCPOLY_CRCPOLY_Pos (0UL) /*!< Position of CRCPOLY field. */ -#define RADIO_CRCPOLY_CRCPOLY_Msk (0xFFFFFFUL << RADIO_CRCPOLY_CRCPOLY_Pos) /*!< Bit mask of CRCPOLY field. */ - -/* Register: RADIO_CRCINIT */ -/* Description: CRC initial value. */ - -/* Bits 23..0 : Initial value for CRC calculation. Decision point: START task. */ -#define RADIO_CRCINIT_CRCINIT_Pos (0UL) /*!< Position of CRCINIT field. */ -#define RADIO_CRCINIT_CRCINIT_Msk (0xFFFFFFUL << RADIO_CRCINIT_CRCINIT_Pos) /*!< Bit mask of CRCINIT field. */ - -/* Register: RADIO_TEST */ -/* Description: Test features enable register. */ - -/* Bit 1 : PLL lock. Decision point: TXEN or RXEN task. */ -#define RADIO_TEST_PLLLOCK_Pos (1UL) /*!< Position of PLLLOCK field. */ -#define RADIO_TEST_PLLLOCK_Msk (0x1UL << RADIO_TEST_PLLLOCK_Pos) /*!< Bit mask of PLLLOCK field. */ -#define RADIO_TEST_PLLLOCK_Disabled (0UL) /*!< PLL lock disabled. */ -#define RADIO_TEST_PLLLOCK_Enabled (1UL) /*!< PLL lock enabled. */ - -/* Bit 0 : Constant carrier. Decision point: TXEN task. */ -#define RADIO_TEST_CONSTCARRIER_Pos (0UL) /*!< Position of CONSTCARRIER field. */ -#define RADIO_TEST_CONSTCARRIER_Msk (0x1UL << RADIO_TEST_CONSTCARRIER_Pos) /*!< Bit mask of CONSTCARRIER field. */ -#define RADIO_TEST_CONSTCARRIER_Disabled (0UL) /*!< Constant carrier disabled. */ -#define RADIO_TEST_CONSTCARRIER_Enabled (1UL) /*!< Constant carrier enabled. */ - -/* Register: RADIO_TIFS */ -/* Description: Inter Frame Spacing in microseconds. */ - -/* Bits 7..0 : Inter frame spacing in microseconds. Decision point: START rask */ -#define RADIO_TIFS_TIFS_Pos (0UL) /*!< Position of TIFS field. */ -#define RADIO_TIFS_TIFS_Msk (0xFFUL << RADIO_TIFS_TIFS_Pos) /*!< Bit mask of TIFS field. */ - -/* Register: RADIO_RSSISAMPLE */ -/* Description: RSSI sample. */ - -/* Bits 6..0 : RSSI sample result. The result is read as a positive value so that ReceivedSignalStrength = -RSSISAMPLE dBm */ -#define RADIO_RSSISAMPLE_RSSISAMPLE_Pos (0UL) /*!< Position of RSSISAMPLE field. */ -#define RADIO_RSSISAMPLE_RSSISAMPLE_Msk (0x7FUL << RADIO_RSSISAMPLE_RSSISAMPLE_Pos) /*!< Bit mask of RSSISAMPLE field. */ - -/* Register: RADIO_STATE */ -/* Description: Current radio state. */ - -/* Bits 3..0 : Current radio state. */ -#define RADIO_STATE_STATE_Pos (0UL) /*!< Position of STATE field. */ -#define RADIO_STATE_STATE_Msk (0xFUL << RADIO_STATE_STATE_Pos) /*!< Bit mask of STATE field. */ -#define RADIO_STATE_STATE_Disabled (0x00UL) /*!< Radio is in the Disabled state. */ -#define RADIO_STATE_STATE_RxRu (0x01UL) /*!< Radio is in the Rx Ramp Up state. */ -#define RADIO_STATE_STATE_RxIdle (0x02UL) /*!< Radio is in the Rx Idle state. */ -#define RADIO_STATE_STATE_Rx (0x03UL) /*!< Radio is in the Rx state. */ -#define RADIO_STATE_STATE_RxDisable (0x04UL) /*!< Radio is in the Rx Disable state. */ -#define RADIO_STATE_STATE_TxRu (0x09UL) /*!< Radio is in the Tx Ramp Up state. */ -#define RADIO_STATE_STATE_TxIdle (0x0AUL) /*!< Radio is in the Tx Idle state. */ -#define RADIO_STATE_STATE_Tx (0x0BUL) /*!< Radio is in the Tx state. */ -#define RADIO_STATE_STATE_TxDisable (0x0CUL) /*!< Radio is in the Tx Disable state. */ - -/* Register: RADIO_DATAWHITEIV */ -/* Description: Data whitening initial value. */ - -/* Bits 6..0 : Data whitening initial value. Bit 0 corresponds to Position 0 of the LSFR, Bit 1 to position 5... Decision point: TXEN or RXEN task. */ -#define RADIO_DATAWHITEIV_DATAWHITEIV_Pos (0UL) /*!< Position of DATAWHITEIV field. */ -#define RADIO_DATAWHITEIV_DATAWHITEIV_Msk (0x7FUL << RADIO_DATAWHITEIV_DATAWHITEIV_Pos) /*!< Bit mask of DATAWHITEIV field. */ - -/* Register: RADIO_DAP */ -/* Description: Device address prefix. */ - -/* Bits 15..0 : Device address prefix. */ -#define RADIO_DAP_DAP_Pos (0UL) /*!< Position of DAP field. */ -#define RADIO_DAP_DAP_Msk (0xFFFFUL << RADIO_DAP_DAP_Pos) /*!< Bit mask of DAP field. */ - -/* Register: RADIO_DACNF */ -/* Description: Device address match configuration. */ - -/* Bit 15 : TxAdd for device address 7. */ -#define RADIO_DACNF_TXADD7_Pos (15UL) /*!< Position of TXADD7 field. */ -#define RADIO_DACNF_TXADD7_Msk (0x1UL << RADIO_DACNF_TXADD7_Pos) /*!< Bit mask of TXADD7 field. */ - -/* Bit 14 : TxAdd for device address 6. */ -#define RADIO_DACNF_TXADD6_Pos (14UL) /*!< Position of TXADD6 field. */ -#define RADIO_DACNF_TXADD6_Msk (0x1UL << RADIO_DACNF_TXADD6_Pos) /*!< Bit mask of TXADD6 field. */ - -/* Bit 13 : TxAdd for device address 5. */ -#define RADIO_DACNF_TXADD5_Pos (13UL) /*!< Position of TXADD5 field. */ -#define RADIO_DACNF_TXADD5_Msk (0x1UL << RADIO_DACNF_TXADD5_Pos) /*!< Bit mask of TXADD5 field. */ - -/* Bit 12 : TxAdd for device address 4. */ -#define RADIO_DACNF_TXADD4_Pos (12UL) /*!< Position of TXADD4 field. */ -#define RADIO_DACNF_TXADD4_Msk (0x1UL << RADIO_DACNF_TXADD4_Pos) /*!< Bit mask of TXADD4 field. */ - -/* Bit 11 : TxAdd for device address 3. */ -#define RADIO_DACNF_TXADD3_Pos (11UL) /*!< Position of TXADD3 field. */ -#define RADIO_DACNF_TXADD3_Msk (0x1UL << RADIO_DACNF_TXADD3_Pos) /*!< Bit mask of TXADD3 field. */ - -/* Bit 10 : TxAdd for device address 2. */ -#define RADIO_DACNF_TXADD2_Pos (10UL) /*!< Position of TXADD2 field. */ -#define RADIO_DACNF_TXADD2_Msk (0x1UL << RADIO_DACNF_TXADD2_Pos) /*!< Bit mask of TXADD2 field. */ - -/* Bit 9 : TxAdd for device address 1. */ -#define RADIO_DACNF_TXADD1_Pos (9UL) /*!< Position of TXADD1 field. */ -#define RADIO_DACNF_TXADD1_Msk (0x1UL << RADIO_DACNF_TXADD1_Pos) /*!< Bit mask of TXADD1 field. */ - -/* Bit 8 : TxAdd for device address 0. */ -#define RADIO_DACNF_TXADD0_Pos (8UL) /*!< Position of TXADD0 field. */ -#define RADIO_DACNF_TXADD0_Msk (0x1UL << RADIO_DACNF_TXADD0_Pos) /*!< Bit mask of TXADD0 field. */ - -/* Bit 7 : Enable or disable device address matching using device address 7. */ -#define RADIO_DACNF_ENA7_Pos (7UL) /*!< Position of ENA7 field. */ -#define RADIO_DACNF_ENA7_Msk (0x1UL << RADIO_DACNF_ENA7_Pos) /*!< Bit mask of ENA7 field. */ -#define RADIO_DACNF_ENA7_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA7_Enabled (1UL) /*!< Enabled. */ - -/* Bit 6 : Enable or disable device address matching using device address 6. */ -#define RADIO_DACNF_ENA6_Pos (6UL) /*!< Position of ENA6 field. */ -#define RADIO_DACNF_ENA6_Msk (0x1UL << RADIO_DACNF_ENA6_Pos) /*!< Bit mask of ENA6 field. */ -#define RADIO_DACNF_ENA6_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA6_Enabled (1UL) /*!< Enabled. */ - -/* Bit 5 : Enable or disable device address matching using device address 5. */ -#define RADIO_DACNF_ENA5_Pos (5UL) /*!< Position of ENA5 field. */ -#define RADIO_DACNF_ENA5_Msk (0x1UL << RADIO_DACNF_ENA5_Pos) /*!< Bit mask of ENA5 field. */ -#define RADIO_DACNF_ENA5_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA5_Enabled (1UL) /*!< Enabled. */ - -/* Bit 4 : Enable or disable device address matching using device address 4. */ -#define RADIO_DACNF_ENA4_Pos (4UL) /*!< Position of ENA4 field. */ -#define RADIO_DACNF_ENA4_Msk (0x1UL << RADIO_DACNF_ENA4_Pos) /*!< Bit mask of ENA4 field. */ -#define RADIO_DACNF_ENA4_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA4_Enabled (1UL) /*!< Enabled. */ - -/* Bit 3 : Enable or disable device address matching using device address 3. */ -#define RADIO_DACNF_ENA3_Pos (3UL) /*!< Position of ENA3 field. */ -#define RADIO_DACNF_ENA3_Msk (0x1UL << RADIO_DACNF_ENA3_Pos) /*!< Bit mask of ENA3 field. */ -#define RADIO_DACNF_ENA3_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA3_Enabled (1UL) /*!< Enabled. */ - -/* Bit 2 : Enable or disable device address matching using device address 2. */ -#define RADIO_DACNF_ENA2_Pos (2UL) /*!< Position of ENA2 field. */ -#define RADIO_DACNF_ENA2_Msk (0x1UL << RADIO_DACNF_ENA2_Pos) /*!< Bit mask of ENA2 field. */ -#define RADIO_DACNF_ENA2_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA2_Enabled (1UL) /*!< Enabled. */ - -/* Bit 1 : Enable or disable device address matching using device address 1. */ -#define RADIO_DACNF_ENA1_Pos (1UL) /*!< Position of ENA1 field. */ -#define RADIO_DACNF_ENA1_Msk (0x1UL << RADIO_DACNF_ENA1_Pos) /*!< Bit mask of ENA1 field. */ -#define RADIO_DACNF_ENA1_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA1_Enabled (1UL) /*!< Enabled. */ - -/* Bit 0 : Enable or disable device address matching using device address 0. */ -#define RADIO_DACNF_ENA0_Pos (0UL) /*!< Position of ENA0 field. */ -#define RADIO_DACNF_ENA0_Msk (0x1UL << RADIO_DACNF_ENA0_Pos) /*!< Bit mask of ENA0 field. */ -#define RADIO_DACNF_ENA0_Disabled (0UL) /*!< Disabled. */ -#define RADIO_DACNF_ENA0_Enabled (1UL) /*!< Enabled. */ - -/* Register: RADIO_OVERRIDE0 */ -/* Description: Trim value override register 0. */ - -/* Bits 31..0 : Trim value override 0. */ -#define RADIO_OVERRIDE0_OVERRIDE0_Pos (0UL) /*!< Position of OVERRIDE0 field. */ -#define RADIO_OVERRIDE0_OVERRIDE0_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE0_OVERRIDE0_Pos) /*!< Bit mask of OVERRIDE0 field. */ - -/* Register: RADIO_OVERRIDE1 */ -/* Description: Trim value override register 1. */ - -/* Bits 31..0 : Trim value override 1. */ -#define RADIO_OVERRIDE1_OVERRIDE1_Pos (0UL) /*!< Position of OVERRIDE1 field. */ -#define RADIO_OVERRIDE1_OVERRIDE1_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE1_OVERRIDE1_Pos) /*!< Bit mask of OVERRIDE1 field. */ - -/* Register: RADIO_OVERRIDE2 */ -/* Description: Trim value override register 2. */ - -/* Bits 31..0 : Trim value override 2. */ -#define RADIO_OVERRIDE2_OVERRIDE2_Pos (0UL) /*!< Position of OVERRIDE2 field. */ -#define RADIO_OVERRIDE2_OVERRIDE2_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE2_OVERRIDE2_Pos) /*!< Bit mask of OVERRIDE2 field. */ - -/* Register: RADIO_OVERRIDE3 */ -/* Description: Trim value override register 3. */ - -/* Bits 31..0 : Trim value override 3. */ -#define RADIO_OVERRIDE3_OVERRIDE3_Pos (0UL) /*!< Position of OVERRIDE3 field. */ -#define RADIO_OVERRIDE3_OVERRIDE3_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE3_OVERRIDE3_Pos) /*!< Bit mask of OVERRIDE3 field. */ - -/* Register: RADIO_OVERRIDE4 */ -/* Description: Trim value override register 4. */ - -/* Bit 31 : Enable or disable override of default trim values. */ -#define RADIO_OVERRIDE4_ENABLE_Pos (31UL) /*!< Position of ENABLE field. */ -#define RADIO_OVERRIDE4_ENABLE_Msk (0x1UL << RADIO_OVERRIDE4_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define RADIO_OVERRIDE4_ENABLE_Disabled (0UL) /*!< Override trim values disabled. */ -#define RADIO_OVERRIDE4_ENABLE_Enabled (1UL) /*!< Override trim values enabled. */ - -/* Bits 27..0 : Trim value override 4. */ -#define RADIO_OVERRIDE4_OVERRIDE4_Pos (0UL) /*!< Position of OVERRIDE4 field. */ -#define RADIO_OVERRIDE4_OVERRIDE4_Msk (0xFFFFFFFUL << RADIO_OVERRIDE4_OVERRIDE4_Pos) /*!< Bit mask of OVERRIDE4 field. */ - -/* Register: RADIO_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define RADIO_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define RADIO_POWER_POWER_Msk (0x1UL << RADIO_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define RADIO_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define RADIO_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: RNG */ -/* Description: Random Number Generator. */ - -/* Register: RNG_SHORTS */ -/* Description: Shortcuts for the RNG. */ - -/* Bit 0 : Shortcut between VALRDY event and STOP task. */ -#define RNG_SHORTS_VALRDY_STOP_Pos (0UL) /*!< Position of VALRDY_STOP field. */ -#define RNG_SHORTS_VALRDY_STOP_Msk (0x1UL << RNG_SHORTS_VALRDY_STOP_Pos) /*!< Bit mask of VALRDY_STOP field. */ -#define RNG_SHORTS_VALRDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define RNG_SHORTS_VALRDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: RNG_INTENSET */ -/* Description: Interrupt enable set register */ - -/* Bit 0 : Enable interrupt on VALRDY event. */ -#define RNG_INTENSET_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ -#define RNG_INTENSET_VALRDY_Msk (0x1UL << RNG_INTENSET_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ -#define RNG_INTENSET_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RNG_INTENSET_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RNG_INTENSET_VALRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: RNG_INTENCLR */ -/* Description: Interrupt enable clear register */ - -/* Bit 0 : Disable interrupt on VALRDY event. */ -#define RNG_INTENCLR_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ -#define RNG_INTENCLR_VALRDY_Msk (0x1UL << RNG_INTENCLR_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ -#define RNG_INTENCLR_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define RNG_INTENCLR_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define RNG_INTENCLR_VALRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: RNG_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 0 : Digital error correction enable. */ -#define RNG_CONFIG_DERCEN_Pos (0UL) /*!< Position of DERCEN field. */ -#define RNG_CONFIG_DERCEN_Msk (0x1UL << RNG_CONFIG_DERCEN_Pos) /*!< Bit mask of DERCEN field. */ -#define RNG_CONFIG_DERCEN_Disabled (0UL) /*!< Digital error correction disabled. */ -#define RNG_CONFIG_DERCEN_Enabled (1UL) /*!< Digital error correction enabled. */ - -/* Register: RNG_VALUE */ -/* Description: RNG random number. */ - -/* Bits 7..0 : Generated random number. */ -#define RNG_VALUE_VALUE_Pos (0UL) /*!< Position of VALUE field. */ -#define RNG_VALUE_VALUE_Msk (0xFFUL << RNG_VALUE_VALUE_Pos) /*!< Bit mask of VALUE field. */ - -/* Register: RNG_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define RNG_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define RNG_POWER_POWER_Msk (0x1UL << RNG_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define RNG_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define RNG_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: RTC */ -/* Description: Real time counter 0. */ - -/* Register: RTC_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 19 : Enable interrupt on COMPARE[3] event. */ -#define RTC_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_INTENSET_COMPARE3_Msk (0x1UL << RTC_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 18 : Enable interrupt on COMPARE[2] event. */ -#define RTC_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_INTENSET_COMPARE2_Msk (0x1UL << RTC_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 17 : Enable interrupt on COMPARE[1] event. */ -#define RTC_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_INTENSET_COMPARE1_Msk (0x1UL << RTC_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 16 : Enable interrupt on COMPARE[0] event. */ -#define RTC_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_INTENSET_COMPARE0_Msk (0x1UL << RTC_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on OVRFLW event. */ -#define RTC_INTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_INTENSET_OVRFLW_Msk (0x1UL << RTC_INTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_INTENSET_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_OVRFLW_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on TICK event. */ -#define RTC_INTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_INTENSET_TICK_Msk (0x1UL << RTC_INTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_INTENSET_TICK_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENSET_TICK_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENSET_TICK_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: RTC_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 19 : Disable interrupt on COMPARE[3] event. */ -#define RTC_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_INTENCLR_COMPARE3_Msk (0x1UL << RTC_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 18 : Disable interrupt on COMPARE[2] event. */ -#define RTC_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_INTENCLR_COMPARE2_Msk (0x1UL << RTC_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 17 : Disable interrupt on COMPARE[1] event. */ -#define RTC_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_INTENCLR_COMPARE1_Msk (0x1UL << RTC_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 16 : Disable interrupt on COMPARE[0] event. */ -#define RTC_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_INTENCLR_COMPARE0_Msk (0x1UL << RTC_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on OVRFLW event. */ -#define RTC_INTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_INTENCLR_OVRFLW_Msk (0x1UL << RTC_INTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_INTENCLR_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_OVRFLW_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on TICK event. */ -#define RTC_INTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_INTENCLR_TICK_Msk (0x1UL << RTC_INTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_INTENCLR_TICK_Disabled (0UL) /*!< Interrupt disabled. */ -#define RTC_INTENCLR_TICK_Enabled (1UL) /*!< Interrupt enabled. */ -#define RTC_INTENCLR_TICK_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: RTC_EVTEN */ -/* Description: Configures event enable routing to PPI for each RTC event. */ - -/* Bit 19 : COMPARE[3] event enable. */ -#define RTC_EVTEN_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_EVTEN_COMPARE3_Msk (0x1UL << RTC_EVTEN_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_EVTEN_COMPARE3_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE3_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 18 : COMPARE[2] event enable. */ -#define RTC_EVTEN_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_EVTEN_COMPARE2_Msk (0x1UL << RTC_EVTEN_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_EVTEN_COMPARE2_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE2_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 17 : COMPARE[1] event enable. */ -#define RTC_EVTEN_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_EVTEN_COMPARE1_Msk (0x1UL << RTC_EVTEN_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_EVTEN_COMPARE1_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE1_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 16 : COMPARE[0] event enable. */ -#define RTC_EVTEN_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_EVTEN_COMPARE0_Msk (0x1UL << RTC_EVTEN_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_EVTEN_COMPARE0_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_COMPARE0_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 1 : OVRFLW event enable. */ -#define RTC_EVTEN_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_EVTEN_OVRFLW_Msk (0x1UL << RTC_EVTEN_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_EVTEN_OVRFLW_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_OVRFLW_Enabled (1UL) /*!< Event enabled. */ - -/* Bit 0 : TICK event enable. */ -#define RTC_EVTEN_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_EVTEN_TICK_Msk (0x1UL << RTC_EVTEN_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_EVTEN_TICK_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTEN_TICK_Enabled (1UL) /*!< Event enabled. */ - -/* Register: RTC_EVTENSET */ -/* Description: Enable events routing to PPI. The reading of this register gives the value of EVTEN. */ - -/* Bit 19 : Enable routing to PPI of COMPARE[3] event. */ -#define RTC_EVTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_EVTENSET_COMPARE3_Msk (0x1UL << RTC_EVTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_EVTENSET_COMPARE3_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE3_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE3_Set (1UL) /*!< Enable event on write. */ - -/* Bit 18 : Enable routing to PPI of COMPARE[2] event. */ -#define RTC_EVTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_EVTENSET_COMPARE2_Msk (0x1UL << RTC_EVTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_EVTENSET_COMPARE2_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE2_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE2_Set (1UL) /*!< Enable event on write. */ - -/* Bit 17 : Enable routing to PPI of COMPARE[1] event. */ -#define RTC_EVTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_EVTENSET_COMPARE1_Msk (0x1UL << RTC_EVTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_EVTENSET_COMPARE1_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE1_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE1_Set (1UL) /*!< Enable event on write. */ - -/* Bit 16 : Enable routing to PPI of COMPARE[0] event. */ -#define RTC_EVTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_EVTENSET_COMPARE0_Msk (0x1UL << RTC_EVTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_EVTENSET_COMPARE0_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_COMPARE0_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_COMPARE0_Set (1UL) /*!< Enable event on write. */ - -/* Bit 1 : Enable routing to PPI of OVRFLW event. */ -#define RTC_EVTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_EVTENSET_OVRFLW_Msk (0x1UL << RTC_EVTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_EVTENSET_OVRFLW_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_OVRFLW_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_OVRFLW_Set (1UL) /*!< Enable event on write. */ - -/* Bit 0 : Enable routing to PPI of TICK event. */ -#define RTC_EVTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_EVTENSET_TICK_Msk (0x1UL << RTC_EVTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_EVTENSET_TICK_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENSET_TICK_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENSET_TICK_Set (1UL) /*!< Enable event on write. */ - -/* Register: RTC_EVTENCLR */ -/* Description: Disable events routing to PPI. The reading of this register gives the value of EVTEN. */ - -/* Bit 19 : Disable routing to PPI of COMPARE[3] event. */ -#define RTC_EVTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define RTC_EVTENCLR_COMPARE3_Msk (0x1UL << RTC_EVTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define RTC_EVTENCLR_COMPARE3_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE3_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE3_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 18 : Disable routing to PPI of COMPARE[2] event. */ -#define RTC_EVTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define RTC_EVTENCLR_COMPARE2_Msk (0x1UL << RTC_EVTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define RTC_EVTENCLR_COMPARE2_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE2_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE2_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 17 : Disable routing to PPI of COMPARE[1] event. */ -#define RTC_EVTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define RTC_EVTENCLR_COMPARE1_Msk (0x1UL << RTC_EVTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define RTC_EVTENCLR_COMPARE1_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE1_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE1_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 16 : Disable routing to PPI of COMPARE[0] event. */ -#define RTC_EVTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define RTC_EVTENCLR_COMPARE0_Msk (0x1UL << RTC_EVTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define RTC_EVTENCLR_COMPARE0_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_COMPARE0_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_COMPARE0_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 1 : Disable routing to PPI of OVRFLW event. */ -#define RTC_EVTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ -#define RTC_EVTENCLR_OVRFLW_Msk (0x1UL << RTC_EVTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ -#define RTC_EVTENCLR_OVRFLW_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_OVRFLW_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_OVRFLW_Clear (1UL) /*!< Disable event on write. */ - -/* Bit 0 : Disable routing to PPI of TICK event. */ -#define RTC_EVTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ -#define RTC_EVTENCLR_TICK_Msk (0x1UL << RTC_EVTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ -#define RTC_EVTENCLR_TICK_Disabled (0UL) /*!< Event disabled. */ -#define RTC_EVTENCLR_TICK_Enabled (1UL) /*!< Event enabled. */ -#define RTC_EVTENCLR_TICK_Clear (1UL) /*!< Disable event on write. */ - -/* Register: RTC_COUNTER */ -/* Description: Current COUNTER value. */ - -/* Bits 23..0 : Counter value. */ -#define RTC_COUNTER_COUNTER_Pos (0UL) /*!< Position of COUNTER field. */ -#define RTC_COUNTER_COUNTER_Msk (0xFFFFFFUL << RTC_COUNTER_COUNTER_Pos) /*!< Bit mask of COUNTER field. */ - -/* Register: RTC_PRESCALER */ -/* Description: 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). Must be written when RTC is STOPed. */ - -/* Bits 11..0 : RTC PRESCALER value. */ -#define RTC_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ -#define RTC_PRESCALER_PRESCALER_Msk (0xFFFUL << RTC_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ - -/* Register: RTC_CC */ -/* Description: Capture/compare registers. */ - -/* Bits 23..0 : Compare value. */ -#define RTC_CC_COMPARE_Pos (0UL) /*!< Position of COMPARE field. */ -#define RTC_CC_COMPARE_Msk (0xFFFFFFUL << RTC_CC_COMPARE_Pos) /*!< Bit mask of COMPARE field. */ - -/* Register: RTC_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define RTC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define RTC_POWER_POWER_Msk (0x1UL << RTC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define RTC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define RTC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: SPI */ -/* Description: SPI master 0. */ - -/* Register: SPI_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 2 : Enable interrupt on READY event. */ -#define SPI_INTENSET_READY_Pos (2UL) /*!< Position of READY field. */ -#define SPI_INTENSET_READY_Msk (0x1UL << SPI_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ -#define SPI_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPI_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPI_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: SPI_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 2 : Disable interrupt on READY event. */ -#define SPI_INTENCLR_READY_Pos (2UL) /*!< Position of READY field. */ -#define SPI_INTENCLR_READY_Msk (0x1UL << SPI_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ -#define SPI_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPI_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPI_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: SPI_ENABLE */ -/* Description: Enable SPI. */ - -/* Bits 2..0 : Enable or disable SPI. */ -#define SPI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define SPI_ENABLE_ENABLE_Msk (0x7UL << SPI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define SPI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPI. */ -#define SPI_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable SPI. */ - -/* Register: SPI_RXD */ -/* Description: RX data. */ - -/* Bits 7..0 : RX data from last transfer. */ -#define SPI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ -#define SPI_RXD_RXD_Msk (0xFFUL << SPI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ - -/* Register: SPI_TXD */ -/* Description: TX data. */ - -/* Bits 7..0 : TX data for next transfer. */ -#define SPI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ -#define SPI_TXD_TXD_Msk (0xFFUL << SPI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ - -/* Register: SPI_FREQUENCY */ -/* Description: SPI frequency */ - -/* Bits 31..0 : SPI data rate. */ -#define SPI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define SPI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ -#define SPI_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125kbps. */ -#define SPI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250kbps. */ -#define SPI_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500kbps. */ -#define SPI_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1Mbps. */ -#define SPI_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2Mbps. */ -#define SPI_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4Mbps. */ -#define SPI_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8Mbps. */ - -/* Register: SPI_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 2 : Serial clock (SCK) polarity. */ -#define SPI_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ -#define SPI_CONFIG_CPOL_Msk (0x1UL << SPI_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ -#define SPI_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ -#define SPI_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ - -/* Bit 1 : Serial clock (SCK) phase. */ -#define SPI_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ -#define SPI_CONFIG_CPHA_Msk (0x1UL << SPI_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ -#define SPI_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ -#define SPI_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ - -/* Bit 0 : Bit order. */ -#define SPI_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ -#define SPI_CONFIG_ORDER_Msk (0x1UL << SPI_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ -#define SPI_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ -#define SPI_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ - -/* Register: SPI_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define SPI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define SPI_POWER_POWER_Msk (0x1UL << SPI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define SPI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define SPI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: SPIM */ -/* Description: SPI master with easyDMA 1. */ - -/* Register: SPIM_SHORTS */ -/* Description: Shortcuts for SPIM. */ - -/* Bit 17 : Shortcut between END event and START task. */ -#define SPIM_SHORTS_END_START_Pos (17UL) /*!< Position of END_START field. */ -#define SPIM_SHORTS_END_START_Msk (0x1UL << SPIM_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */ -#define SPIM_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */ -#define SPIM_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: SPIM_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 19 : Enable interrupt on STARTED event. */ -#define SPIM_INTENSET_STARTED_Pos (19UL) /*!< Position of STARTED field. */ -#define SPIM_INTENSET_STARTED_Msk (0x1UL << SPIM_INTENSET_STARTED_Pos) /*!< Bit mask of STARTED field. */ -#define SPIM_INTENSET_STARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_STARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_STARTED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 8 : Enable interrupt on ENDTX event. */ -#define SPIM_INTENSET_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */ -#define SPIM_INTENSET_ENDTX_Msk (0x1UL << SPIM_INTENSET_ENDTX_Pos) /*!< Bit mask of ENDTX field. */ -#define SPIM_INTENSET_ENDTX_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_ENDTX_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_ENDTX_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 6 : Enable interrupt on END event. */ -#define SPIM_INTENSET_END_Pos (6UL) /*!< Position of END field. */ -#define SPIM_INTENSET_END_Msk (0x1UL << SPIM_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define SPIM_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 4 : Enable interrupt on ENDRX event. */ -#define SPIM_INTENSET_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */ -#define SPIM_INTENSET_ENDRX_Msk (0x1UL << SPIM_INTENSET_ENDRX_Pos) /*!< Bit mask of ENDRX field. */ -#define SPIM_INTENSET_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_ENDRX_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on STOPPED event. */ -#define SPIM_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define SPIM_INTENSET_STOPPED_Msk (0x1UL << SPIM_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define SPIM_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: SPIM_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 19 : Disable interrupt on STARTED event. */ -#define SPIM_INTENCLR_STARTED_Pos (19UL) /*!< Position of STARTED field. */ -#define SPIM_INTENCLR_STARTED_Msk (0x1UL << SPIM_INTENCLR_STARTED_Pos) /*!< Bit mask of STARTED field. */ -#define SPIM_INTENCLR_STARTED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_STARTED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_STARTED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 8 : Disable interrupt on ENDTX event. */ -#define SPIM_INTENCLR_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */ -#define SPIM_INTENCLR_ENDTX_Msk (0x1UL << SPIM_INTENCLR_ENDTX_Pos) /*!< Bit mask of ENDTX field. */ -#define SPIM_INTENCLR_ENDTX_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_ENDTX_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_ENDTX_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 6 : Disable interrupt on END event. */ -#define SPIM_INTENCLR_END_Pos (6UL) /*!< Position of END field. */ -#define SPIM_INTENCLR_END_Msk (0x1UL << SPIM_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define SPIM_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 4 : Disable interrupt on ENDRX event. */ -#define SPIM_INTENCLR_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */ -#define SPIM_INTENCLR_ENDRX_Msk (0x1UL << SPIM_INTENCLR_ENDRX_Pos) /*!< Bit mask of ENDRX field. */ -#define SPIM_INTENCLR_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_ENDRX_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on STOPPED event. */ -#define SPIM_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define SPIM_INTENCLR_STOPPED_Msk (0x1UL << SPIM_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define SPIM_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIM_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIM_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: SPIM_ENABLE */ -/* Description: Enable SPIM. */ - -/* Bits 3..0 : Enable or disable SPIM. */ -#define SPIM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define SPIM_ENABLE_ENABLE_Msk (0xFUL << SPIM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define SPIM_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIM. */ -#define SPIM_ENABLE_ENABLE_Enabled (0x07UL) /*!< Enable SPIM. */ - -/* Register: SPIM_FREQUENCY */ -/* Description: SPI frequency. */ - -/* Bits 31..0 : SPI master data rate. */ -#define SPIM_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define SPIM_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPIM_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ -#define SPIM_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125 kbps. */ -#define SPIM_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */ -#define SPIM_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500 kbps. */ -#define SPIM_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1 Mbps. */ -#define SPIM_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2 Mbps. */ -#define SPIM_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4 Mbps. */ -#define SPIM_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8 Mbps. */ - -/* Register: SPIM_RXD_PTR */ -/* Description: Data pointer. */ - -/* Bits 31..0 : Data pointer. */ -#define SPIM_RXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */ -#define SPIM_RXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_RXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */ - -/* Register: SPIM_RXD_MAXCNT */ -/* Description: Maximum number of buffer bytes to receive. */ - -/* Bits 7..0 : Maximum number of buffer bytes to receive. */ -#define SPIM_RXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */ -#define SPIM_RXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_RXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */ - -/* Register: SPIM_RXD_AMOUNT */ -/* Description: Number of bytes received in the last transaction. */ - -/* Bits 7..0 : Number of bytes received in the last transaction. */ -#define SPIM_RXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */ -#define SPIM_RXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_RXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */ - -/* Register: SPIM_TXD_PTR */ -/* Description: Data pointer. */ - -/* Bits 31..0 : Data pointer. */ -#define SPIM_TXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */ -#define SPIM_TXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_TXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */ - -/* Register: SPIM_TXD_MAXCNT */ -/* Description: Maximum number of buffer bytes to send. */ - -/* Bits 7..0 : Maximum number of buffer bytes to send. */ -#define SPIM_TXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */ -#define SPIM_TXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_TXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */ - -/* Register: SPIM_TXD_AMOUNT */ -/* Description: Number of bytes sent in the last transaction. */ - -/* Bits 7..0 : Number of bytes sent in the last transaction. */ -#define SPIM_TXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */ -#define SPIM_TXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_TXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */ - -/* Register: SPIM_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 2 : Serial clock (SCK) polarity. */ -#define SPIM_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ -#define SPIM_CONFIG_CPOL_Msk (0x1UL << SPIM_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ -#define SPIM_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ -#define SPIM_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ - -/* Bit 1 : Serial clock (SCK) phase. */ -#define SPIM_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ -#define SPIM_CONFIG_CPHA_Msk (0x1UL << SPIM_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ -#define SPIM_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ -#define SPIM_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ - -/* Bit 0 : Bit order. */ -#define SPIM_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ -#define SPIM_CONFIG_ORDER_Msk (0x1UL << SPIM_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ -#define SPIM_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ -#define SPIM_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ - -/* Register: SPIM_ORC */ -/* Description: Over-read character. */ - -/* Bits 7..0 : Over-read character. */ -#define SPIM_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */ -#define SPIM_ORC_ORC_Msk (0xFFUL << SPIM_ORC_ORC_Pos) /*!< Bit mask of ORC field. */ - -/* Register: SPIM_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define SPIM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define SPIM_POWER_POWER_Msk (0x1UL << SPIM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define SPIM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define SPIM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: SPIS */ -/* Description: SPI slave 1. */ - -/* Register: SPIS_SHORTS */ -/* Description: Shortcuts for SPIS. */ - -/* Bit 2 : Shortcut between END event and the ACQUIRE task. */ -#define SPIS_SHORTS_END_ACQUIRE_Pos (2UL) /*!< Position of END_ACQUIRE field. */ -#define SPIS_SHORTS_END_ACQUIRE_Msk (0x1UL << SPIS_SHORTS_END_ACQUIRE_Pos) /*!< Bit mask of END_ACQUIRE field. */ -#define SPIS_SHORTS_END_ACQUIRE_Disabled (0UL) /*!< Shortcut disabled. */ -#define SPIS_SHORTS_END_ACQUIRE_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: SPIS_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 10 : Enable interrupt on ACQUIRED event. */ -#define SPIS_INTENSET_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ -#define SPIS_INTENSET_ACQUIRED_Msk (0x1UL << SPIS_INTENSET_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ -#define SPIS_INTENSET_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENSET_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENSET_ACQUIRED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on END event. */ -#define SPIS_INTENSET_END_Pos (1UL) /*!< Position of END field. */ -#define SPIS_INTENSET_END_Msk (0x1UL << SPIS_INTENSET_END_Pos) /*!< Bit mask of END field. */ -#define SPIS_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: SPIS_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 10 : Disable interrupt on ACQUIRED event. */ -#define SPIS_INTENCLR_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ -#define SPIS_INTENCLR_ACQUIRED_Msk (0x1UL << SPIS_INTENCLR_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ -#define SPIS_INTENCLR_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENCLR_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENCLR_ACQUIRED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on END event. */ -#define SPIS_INTENCLR_END_Pos (1UL) /*!< Position of END field. */ -#define SPIS_INTENCLR_END_Msk (0x1UL << SPIS_INTENCLR_END_Pos) /*!< Bit mask of END field. */ -#define SPIS_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ -#define SPIS_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ -#define SPIS_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: SPIS_SEMSTAT */ -/* Description: Semaphore status. */ - -/* Bits 1..0 : Semaphore status. */ -#define SPIS_SEMSTAT_SEMSTAT_Pos (0UL) /*!< Position of SEMSTAT field. */ -#define SPIS_SEMSTAT_SEMSTAT_Msk (0x3UL << SPIS_SEMSTAT_SEMSTAT_Pos) /*!< Bit mask of SEMSTAT field. */ -#define SPIS_SEMSTAT_SEMSTAT_Free (0x00UL) /*!< Semaphore is free. */ -#define SPIS_SEMSTAT_SEMSTAT_CPU (0x01UL) /*!< Semaphore is assigned to the CPU. */ -#define SPIS_SEMSTAT_SEMSTAT_SPIS (0x02UL) /*!< Semaphore is assigned to the SPIS. */ -#define SPIS_SEMSTAT_SEMSTAT_CPUPending (0x03UL) /*!< Semaphore is assigned to the SPIS, but a handover to the CPU is pending. */ - -/* Register: SPIS_STATUS */ -/* Description: Status from last transaction. */ - -/* Bit 1 : RX buffer overflow detected, and prevented. */ -#define SPIS_STATUS_OVERFLOW_Pos (1UL) /*!< Position of OVERFLOW field. */ -#define SPIS_STATUS_OVERFLOW_Msk (0x1UL << SPIS_STATUS_OVERFLOW_Pos) /*!< Bit mask of OVERFLOW field. */ -#define SPIS_STATUS_OVERFLOW_NotPresent (0UL) /*!< Error not present. */ -#define SPIS_STATUS_OVERFLOW_Present (1UL) /*!< Error present. */ -#define SPIS_STATUS_OVERFLOW_Clear (1UL) /*!< Clear on write. */ - -/* Bit 0 : TX buffer overread detected, and prevented. */ -#define SPIS_STATUS_OVERREAD_Pos (0UL) /*!< Position of OVERREAD field. */ -#define SPIS_STATUS_OVERREAD_Msk (0x1UL << SPIS_STATUS_OVERREAD_Pos) /*!< Bit mask of OVERREAD field. */ -#define SPIS_STATUS_OVERREAD_NotPresent (0UL) /*!< Error not present. */ -#define SPIS_STATUS_OVERREAD_Present (1UL) /*!< Error present. */ -#define SPIS_STATUS_OVERREAD_Clear (1UL) /*!< Clear on write. */ - -/* Register: SPIS_ENABLE */ -/* Description: Enable SPIS. */ - -/* Bits 2..0 : Enable or disable SPIS. */ -#define SPIS_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define SPIS_ENABLE_ENABLE_Msk (0x7UL << SPIS_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define SPIS_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIS. */ -#define SPIS_ENABLE_ENABLE_Enabled (0x02UL) /*!< Enable SPIS. */ - -/* Register: SPIS_MAXRX */ -/* Description: Maximum number of bytes in the receive buffer. */ - -/* Bits 7..0 : Maximum number of bytes in the receive buffer. */ -#define SPIS_MAXRX_MAXRX_Pos (0UL) /*!< Position of MAXRX field. */ -#define SPIS_MAXRX_MAXRX_Msk (0xFFUL << SPIS_MAXRX_MAXRX_Pos) /*!< Bit mask of MAXRX field. */ - -/* Register: SPIS_AMOUNTRX */ -/* Description: Number of bytes received in last granted transaction. */ - -/* Bits 7..0 : Number of bytes received in last granted transaction. */ -#define SPIS_AMOUNTRX_AMOUNTRX_Pos (0UL) /*!< Position of AMOUNTRX field. */ -#define SPIS_AMOUNTRX_AMOUNTRX_Msk (0xFFUL << SPIS_AMOUNTRX_AMOUNTRX_Pos) /*!< Bit mask of AMOUNTRX field. */ - -/* Register: SPIS_MAXTX */ -/* Description: Maximum number of bytes in the transmit buffer. */ - -/* Bits 7..0 : Maximum number of bytes in the transmit buffer. */ -#define SPIS_MAXTX_MAXTX_Pos (0UL) /*!< Position of MAXTX field. */ -#define SPIS_MAXTX_MAXTX_Msk (0xFFUL << SPIS_MAXTX_MAXTX_Pos) /*!< Bit mask of MAXTX field. */ - -/* Register: SPIS_AMOUNTTX */ -/* Description: Number of bytes transmitted in last granted transaction. */ - -/* Bits 7..0 : Number of bytes transmitted in last granted transaction. */ -#define SPIS_AMOUNTTX_AMOUNTTX_Pos (0UL) /*!< Position of AMOUNTTX field. */ -#define SPIS_AMOUNTTX_AMOUNTTX_Msk (0xFFUL << SPIS_AMOUNTTX_AMOUNTTX_Pos) /*!< Bit mask of AMOUNTTX field. */ - -/* Register: SPIS_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 2 : Serial clock (SCK) polarity. */ -#define SPIS_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ -#define SPIS_CONFIG_CPOL_Msk (0x1UL << SPIS_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ -#define SPIS_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ -#define SPIS_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ - -/* Bit 1 : Serial clock (SCK) phase. */ -#define SPIS_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ -#define SPIS_CONFIG_CPHA_Msk (0x1UL << SPIS_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ -#define SPIS_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ -#define SPIS_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ - -/* Bit 0 : Bit order. */ -#define SPIS_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ -#define SPIS_CONFIG_ORDER_Msk (0x1UL << SPIS_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ -#define SPIS_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ -#define SPIS_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ - -/* Register: SPIS_DEF */ -/* Description: Default character. */ - -/* Bits 7..0 : Default character. */ -#define SPIS_DEF_DEF_Pos (0UL) /*!< Position of DEF field. */ -#define SPIS_DEF_DEF_Msk (0xFFUL << SPIS_DEF_DEF_Pos) /*!< Bit mask of DEF field. */ - -/* Register: SPIS_ORC */ -/* Description: Over-read character. */ - -/* Bits 7..0 : Over-read character. */ -#define SPIS_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */ -#define SPIS_ORC_ORC_Msk (0xFFUL << SPIS_ORC_ORC_Pos) /*!< Bit mask of ORC field. */ - -/* Register: SPIS_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define SPIS_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define SPIS_POWER_POWER_Msk (0x1UL << SPIS_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define SPIS_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define SPIS_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: TEMP */ -/* Description: Temperature Sensor. */ - -/* Register: TEMP_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 0 : Enable interrupt on DATARDY event. */ -#define TEMP_INTENSET_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ -#define TEMP_INTENSET_DATARDY_Msk (0x1UL << TEMP_INTENSET_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ -#define TEMP_INTENSET_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TEMP_INTENSET_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TEMP_INTENSET_DATARDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: TEMP_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 0 : Disable interrupt on DATARDY event. */ -#define TEMP_INTENCLR_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ -#define TEMP_INTENCLR_DATARDY_Msk (0x1UL << TEMP_INTENCLR_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ -#define TEMP_INTENCLR_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TEMP_INTENCLR_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TEMP_INTENCLR_DATARDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: TEMP_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define TEMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define TEMP_POWER_POWER_Msk (0x1UL << TEMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define TEMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define TEMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: TIMER */ -/* Description: Timer 0. */ - -/* Register: TIMER_SHORTS */ -/* Description: Shortcuts for Timer. */ - -/* Bit 11 : Shortcut between CC[3] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE3_STOP_Pos (11UL) /*!< Position of COMPARE3_STOP field. */ -#define TIMER_SHORTS_COMPARE3_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE3_STOP_Pos) /*!< Bit mask of COMPARE3_STOP field. */ -#define TIMER_SHORTS_COMPARE3_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE3_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 10 : Shortcut between CC[2] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE2_STOP_Pos (10UL) /*!< Position of COMPARE2_STOP field. */ -#define TIMER_SHORTS_COMPARE2_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE2_STOP_Pos) /*!< Bit mask of COMPARE2_STOP field. */ -#define TIMER_SHORTS_COMPARE2_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE2_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 9 : Shortcut between CC[1] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE1_STOP_Pos (9UL) /*!< Position of COMPARE1_STOP field. */ -#define TIMER_SHORTS_COMPARE1_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE1_STOP_Pos) /*!< Bit mask of COMPARE1_STOP field. */ -#define TIMER_SHORTS_COMPARE1_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE1_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 8 : Shortcut between CC[0] event and the STOP task. */ -#define TIMER_SHORTS_COMPARE0_STOP_Pos (8UL) /*!< Position of COMPARE0_STOP field. */ -#define TIMER_SHORTS_COMPARE0_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE0_STOP_Pos) /*!< Bit mask of COMPARE0_STOP field. */ -#define TIMER_SHORTS_COMPARE0_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE0_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between CC[3] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Pos (3UL) /*!< Position of COMPARE3_CLEAR field. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE3_CLEAR_Pos) /*!< Bit mask of COMPARE3_CLEAR field. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE3_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 2 : Shortcut between CC[2] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Pos (2UL) /*!< Position of COMPARE2_CLEAR field. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE2_CLEAR_Pos) /*!< Bit mask of COMPARE2_CLEAR field. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE2_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 1 : Shortcut between CC[1] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Pos (1UL) /*!< Position of COMPARE1_CLEAR field. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE1_CLEAR_Pos) /*!< Bit mask of COMPARE1_CLEAR field. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE1_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between CC[0] event and the CLEAR task. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Pos (0UL) /*!< Position of COMPARE0_CLEAR field. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE0_CLEAR_Pos) /*!< Bit mask of COMPARE0_CLEAR field. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ -#define TIMER_SHORTS_COMPARE0_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: TIMER_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 19 : Enable interrupt on COMPARE[3] */ -#define TIMER_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define TIMER_INTENSET_COMPARE3_Msk (0x1UL << TIMER_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define TIMER_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 18 : Enable interrupt on COMPARE[2] */ -#define TIMER_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define TIMER_INTENSET_COMPARE2_Msk (0x1UL << TIMER_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define TIMER_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 17 : Enable interrupt on COMPARE[1] */ -#define TIMER_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define TIMER_INTENSET_COMPARE1_Msk (0x1UL << TIMER_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define TIMER_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 16 : Enable interrupt on COMPARE[0] */ -#define TIMER_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define TIMER_INTENSET_COMPARE0_Msk (0x1UL << TIMER_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define TIMER_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: TIMER_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 19 : Disable interrupt on COMPARE[3] */ -#define TIMER_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ -#define TIMER_INTENCLR_COMPARE3_Msk (0x1UL << TIMER_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ -#define TIMER_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 18 : Disable interrupt on COMPARE[2] */ -#define TIMER_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ -#define TIMER_INTENCLR_COMPARE2_Msk (0x1UL << TIMER_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ -#define TIMER_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 17 : Disable interrupt on COMPARE[1] */ -#define TIMER_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ -#define TIMER_INTENCLR_COMPARE1_Msk (0x1UL << TIMER_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ -#define TIMER_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 16 : Disable interrupt on COMPARE[0] */ -#define TIMER_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ -#define TIMER_INTENCLR_COMPARE0_Msk (0x1UL << TIMER_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ -#define TIMER_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ -#define TIMER_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ -#define TIMER_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: TIMER_MODE */ -/* Description: Timer Mode selection. */ - -/* Bit 0 : Select Normal or Counter mode. */ -#define TIMER_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ -#define TIMER_MODE_MODE_Msk (0x1UL << TIMER_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ -#define TIMER_MODE_MODE_Timer (0UL) /*!< Timer in Normal mode. */ -#define TIMER_MODE_MODE_Counter (1UL) /*!< Timer in Counter mode. */ - -/* Register: TIMER_BITMODE */ -/* Description: Sets timer behaviour. */ - -/* Bits 1..0 : Sets timer behaviour ro be like the implementation of a timer with width as indicated. */ -#define TIMER_BITMODE_BITMODE_Pos (0UL) /*!< Position of BITMODE field. */ -#define TIMER_BITMODE_BITMODE_Msk (0x3UL << TIMER_BITMODE_BITMODE_Pos) /*!< Bit mask of BITMODE field. */ -#define TIMER_BITMODE_BITMODE_16Bit (0x00UL) /*!< 16-bit timer behaviour. */ -#define TIMER_BITMODE_BITMODE_08Bit (0x01UL) /*!< 8-bit timer behaviour. */ -#define TIMER_BITMODE_BITMODE_24Bit (0x02UL) /*!< 24-bit timer behaviour. */ -#define TIMER_BITMODE_BITMODE_32Bit (0x03UL) /*!< 32-bit timer behaviour. */ - -/* Register: TIMER_PRESCALER */ -/* Description: 4-bit prescaler to source clock frequency (max value 9). Source clock frequency is divided by 2^SCALE. */ - -/* Bits 3..0 : Timer PRESCALER value. Max value is 9. */ -#define TIMER_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ -#define TIMER_PRESCALER_PRESCALER_Msk (0xFUL << TIMER_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ - -/* Register: TIMER_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define TIMER_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define TIMER_POWER_POWER_Msk (0x1UL << TIMER_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define TIMER_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define TIMER_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: TWI */ -/* Description: Two-wire interface master 0. */ - -/* Register: TWI_SHORTS */ -/* Description: Shortcuts for TWI. */ - -/* Bit 1 : Shortcut between BB event and the STOP task. */ -#define TWI_SHORTS_BB_STOP_Pos (1UL) /*!< Position of BB_STOP field. */ -#define TWI_SHORTS_BB_STOP_Msk (0x1UL << TWI_SHORTS_BB_STOP_Pos) /*!< Bit mask of BB_STOP field. */ -#define TWI_SHORTS_BB_STOP_Disabled (0UL) /*!< Shortcut disabled. */ -#define TWI_SHORTS_BB_STOP_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 0 : Shortcut between BB event and the SUSPEND task. */ -#define TWI_SHORTS_BB_SUSPEND_Pos (0UL) /*!< Position of BB_SUSPEND field. */ -#define TWI_SHORTS_BB_SUSPEND_Msk (0x1UL << TWI_SHORTS_BB_SUSPEND_Pos) /*!< Bit mask of BB_SUSPEND field. */ -#define TWI_SHORTS_BB_SUSPEND_Disabled (0UL) /*!< Shortcut disabled. */ -#define TWI_SHORTS_BB_SUSPEND_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: TWI_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 18 : Enable interrupt on SUSPENDED event. */ -#define TWI_INTENSET_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */ -#define TWI_INTENSET_SUSPENDED_Msk (0x1UL << TWI_INTENSET_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */ -#define TWI_INTENSET_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_SUSPENDED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 14 : Enable interrupt on BB event. */ -#define TWI_INTENSET_BB_Pos (14UL) /*!< Position of BB field. */ -#define TWI_INTENSET_BB_Msk (0x1UL << TWI_INTENSET_BB_Pos) /*!< Bit mask of BB field. */ -#define TWI_INTENSET_BB_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_BB_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_BB_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 9 : Enable interrupt on ERROR event. */ -#define TWI_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define TWI_INTENSET_ERROR_Msk (0x1UL << TWI_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define TWI_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 7 : Enable interrupt on TXDSENT event. */ -#define TWI_INTENSET_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ -#define TWI_INTENSET_TXDSENT_Msk (0x1UL << TWI_INTENSET_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ -#define TWI_INTENSET_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_TXDSENT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on READY event. */ -#define TWI_INTENSET_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ -#define TWI_INTENSET_RXDREADY_Msk (0x1UL << TWI_INTENSET_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ -#define TWI_INTENSET_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_RXDREADY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on STOPPED event. */ -#define TWI_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define TWI_INTENSET_STOPPED_Msk (0x1UL << TWI_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define TWI_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: TWI_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 18 : Disable interrupt on SUSPENDED event. */ -#define TWI_INTENCLR_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */ -#define TWI_INTENCLR_SUSPENDED_Msk (0x1UL << TWI_INTENCLR_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */ -#define TWI_INTENCLR_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_SUSPENDED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 14 : Disable interrupt on BB event. */ -#define TWI_INTENCLR_BB_Pos (14UL) /*!< Position of BB field. */ -#define TWI_INTENCLR_BB_Msk (0x1UL << TWI_INTENCLR_BB_Pos) /*!< Bit mask of BB field. */ -#define TWI_INTENCLR_BB_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_BB_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_BB_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 9 : Disable interrupt on ERROR event. */ -#define TWI_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define TWI_INTENCLR_ERROR_Msk (0x1UL << TWI_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define TWI_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 7 : Disable interrupt on TXDSENT event. */ -#define TWI_INTENCLR_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ -#define TWI_INTENCLR_TXDSENT_Msk (0x1UL << TWI_INTENCLR_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ -#define TWI_INTENCLR_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_TXDSENT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on RXDREADY event. */ -#define TWI_INTENCLR_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ -#define TWI_INTENCLR_RXDREADY_Msk (0x1UL << TWI_INTENCLR_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ -#define TWI_INTENCLR_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_RXDREADY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on STOPPED event. */ -#define TWI_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ -#define TWI_INTENCLR_STOPPED_Msk (0x1UL << TWI_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ -#define TWI_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ -#define TWI_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ -#define TWI_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: TWI_ERRORSRC */ -/* Description: Two-wire error source. Write error field to 1 to clear error. */ - -/* Bit 2 : NACK received after sending a data byte. */ -#define TWI_ERRORSRC_DNACK_Pos (2UL) /*!< Position of DNACK field. */ -#define TWI_ERRORSRC_DNACK_Msk (0x1UL << TWI_ERRORSRC_DNACK_Pos) /*!< Bit mask of DNACK field. */ -#define TWI_ERRORSRC_DNACK_NotPresent (0UL) /*!< Error not present. */ -#define TWI_ERRORSRC_DNACK_Present (1UL) /*!< Error present. */ -#define TWI_ERRORSRC_DNACK_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 1 : NACK received after sending the address. */ -#define TWI_ERRORSRC_ANACK_Pos (1UL) /*!< Position of ANACK field. */ -#define TWI_ERRORSRC_ANACK_Msk (0x1UL << TWI_ERRORSRC_ANACK_Pos) /*!< Bit mask of ANACK field. */ -#define TWI_ERRORSRC_ANACK_NotPresent (0UL) /*!< Error not present. */ -#define TWI_ERRORSRC_ANACK_Present (1UL) /*!< Error present. */ -#define TWI_ERRORSRC_ANACK_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 0 : Byte received in RXD register before read of the last received byte (data loss). */ -#define TWI_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */ -#define TWI_ERRORSRC_OVERRUN_Msk (0x1UL << TWI_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */ -#define TWI_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */ -#define TWI_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */ -#define TWI_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */ - -/* Register: TWI_ENABLE */ -/* Description: Enable two-wire master. */ - -/* Bits 2..0 : Enable or disable W2M */ -#define TWI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define TWI_ENABLE_ENABLE_Msk (0x7UL << TWI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define TWI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled. */ -#define TWI_ENABLE_ENABLE_Enabled (0x05UL) /*!< Enabled. */ - -/* Register: TWI_RXD */ -/* Description: RX data register. */ - -/* Bits 7..0 : RX data from last transfer. */ -#define TWI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ -#define TWI_RXD_RXD_Msk (0xFFUL << TWI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ - -/* Register: TWI_TXD */ -/* Description: TX data register. */ - -/* Bits 7..0 : TX data for next transfer. */ -#define TWI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ -#define TWI_TXD_TXD_Msk (0xFFUL << TWI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ - -/* Register: TWI_FREQUENCY */ -/* Description: Two-wire frequency. */ - -/* Bits 31..0 : Two-wire master clock frequency. */ -#define TWI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ -#define TWI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << TWI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ -#define TWI_FREQUENCY_FREQUENCY_K100 (0x01980000UL) /*!< 100 kbps. */ -#define TWI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */ -#define TWI_FREQUENCY_FREQUENCY_K400 (0x06680000UL) /*!< 400 kbps. */ - -/* Register: TWI_ADDRESS */ -/* Description: Address used in the two-wire transfer. */ - -/* Bits 6..0 : Two-wire address. */ -#define TWI_ADDRESS_ADDRESS_Pos (0UL) /*!< Position of ADDRESS field. */ -#define TWI_ADDRESS_ADDRESS_Msk (0x7FUL << TWI_ADDRESS_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ - -/* Register: TWI_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define TWI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define TWI_POWER_POWER_Msk (0x1UL << TWI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define TWI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define TWI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: UART */ -/* Description: Universal Asynchronous Receiver/Transmitter. */ - -/* Register: UART_SHORTS */ -/* Description: Shortcuts for UART. */ - -/* Bit 4 : Shortcut between NCTS event and the STOPRX task. */ -#define UART_SHORTS_NCTS_STOPRX_Pos (4UL) /*!< Position of NCTS_STOPRX field. */ -#define UART_SHORTS_NCTS_STOPRX_Msk (0x1UL << UART_SHORTS_NCTS_STOPRX_Pos) /*!< Bit mask of NCTS_STOPRX field. */ -#define UART_SHORTS_NCTS_STOPRX_Disabled (0UL) /*!< Shortcut disabled. */ -#define UART_SHORTS_NCTS_STOPRX_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Bit 3 : Shortcut between CTS event and the STARTRX task. */ -#define UART_SHORTS_CTS_STARTRX_Pos (3UL) /*!< Position of CTS_STARTRX field. */ -#define UART_SHORTS_CTS_STARTRX_Msk (0x1UL << UART_SHORTS_CTS_STARTRX_Pos) /*!< Bit mask of CTS_STARTRX field. */ -#define UART_SHORTS_CTS_STARTRX_Disabled (0UL) /*!< Shortcut disabled. */ -#define UART_SHORTS_CTS_STARTRX_Enabled (1UL) /*!< Shortcut enabled. */ - -/* Register: UART_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 17 : Enable interrupt on RXTO event. */ -#define UART_INTENSET_RXTO_Pos (17UL) /*!< Position of RXTO field. */ -#define UART_INTENSET_RXTO_Msk (0x1UL << UART_INTENSET_RXTO_Pos) /*!< Bit mask of RXTO field. */ -#define UART_INTENSET_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_RXTO_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 9 : Enable interrupt on ERROR event. */ -#define UART_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define UART_INTENSET_ERROR_Msk (0x1UL << UART_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define UART_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 7 : Enable interrupt on TXRDY event. */ -#define UART_INTENSET_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ -#define UART_INTENSET_TXDRDY_Msk (0x1UL << UART_INTENSET_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ -#define UART_INTENSET_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_TXDRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 2 : Enable interrupt on RXRDY event. */ -#define UART_INTENSET_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ -#define UART_INTENSET_RXDRDY_Msk (0x1UL << UART_INTENSET_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ -#define UART_INTENSET_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_RXDRDY_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 1 : Enable interrupt on NCTS event. */ -#define UART_INTENSET_NCTS_Pos (1UL) /*!< Position of NCTS field. */ -#define UART_INTENSET_NCTS_Msk (0x1UL << UART_INTENSET_NCTS_Pos) /*!< Bit mask of NCTS field. */ -#define UART_INTENSET_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_NCTS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Bit 0 : Enable interrupt on CTS event. */ -#define UART_INTENSET_CTS_Pos (0UL) /*!< Position of CTS field. */ -#define UART_INTENSET_CTS_Msk (0x1UL << UART_INTENSET_CTS_Pos) /*!< Bit mask of CTS field. */ -#define UART_INTENSET_CTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENSET_CTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENSET_CTS_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: UART_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 17 : Disable interrupt on RXTO event. */ -#define UART_INTENCLR_RXTO_Pos (17UL) /*!< Position of RXTO field. */ -#define UART_INTENCLR_RXTO_Msk (0x1UL << UART_INTENCLR_RXTO_Pos) /*!< Bit mask of RXTO field. */ -#define UART_INTENCLR_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_RXTO_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 9 : Disable interrupt on ERROR event. */ -#define UART_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ -#define UART_INTENCLR_ERROR_Msk (0x1UL << UART_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ -#define UART_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 7 : Disable interrupt on TXRDY event. */ -#define UART_INTENCLR_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ -#define UART_INTENCLR_TXDRDY_Msk (0x1UL << UART_INTENCLR_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ -#define UART_INTENCLR_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_TXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 2 : Disable interrupt on RXRDY event. */ -#define UART_INTENCLR_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ -#define UART_INTENCLR_RXDRDY_Msk (0x1UL << UART_INTENCLR_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ -#define UART_INTENCLR_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_RXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 1 : Disable interrupt on NCTS event. */ -#define UART_INTENCLR_NCTS_Pos (1UL) /*!< Position of NCTS field. */ -#define UART_INTENCLR_NCTS_Msk (0x1UL << UART_INTENCLR_NCTS_Pos) /*!< Bit mask of NCTS field. */ -#define UART_INTENCLR_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_NCTS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Bit 0 : Disable interrupt on CTS event. */ -#define UART_INTENCLR_CTS_Pos (0UL) /*!< Position of CTS field. */ -#define UART_INTENCLR_CTS_Msk (0x1UL << UART_INTENCLR_CTS_Pos) /*!< Bit mask of CTS field. */ -#define UART_INTENCLR_CTS_Disabled (0UL) /*!< Interrupt disabled. */ -#define UART_INTENCLR_CTS_Enabled (1UL) /*!< Interrupt enabled. */ -#define UART_INTENCLR_CTS_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: UART_ERRORSRC */ -/* Description: Error source. Write error field to 1 to clear error. */ - -/* Bit 3 : The serial data input is '0' for longer than the length of a data frame. */ -#define UART_ERRORSRC_BREAK_Pos (3UL) /*!< Position of BREAK field. */ -#define UART_ERRORSRC_BREAK_Msk (0x1UL << UART_ERRORSRC_BREAK_Pos) /*!< Bit mask of BREAK field. */ -#define UART_ERRORSRC_BREAK_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_BREAK_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_BREAK_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 2 : A valid stop bit is not detected on the serial data input after all bits in a character have been received. */ -#define UART_ERRORSRC_FRAMING_Pos (2UL) /*!< Position of FRAMING field. */ -#define UART_ERRORSRC_FRAMING_Msk (0x1UL << UART_ERRORSRC_FRAMING_Pos) /*!< Bit mask of FRAMING field. */ -#define UART_ERRORSRC_FRAMING_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_FRAMING_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_FRAMING_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 1 : A character with bad parity is received. Only checked if HW parity control is enabled. */ -#define UART_ERRORSRC_PARITY_Pos (1UL) /*!< Position of PARITY field. */ -#define UART_ERRORSRC_PARITY_Msk (0x1UL << UART_ERRORSRC_PARITY_Pos) /*!< Bit mask of PARITY field. */ -#define UART_ERRORSRC_PARITY_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_PARITY_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_PARITY_Clear (1UL) /*!< Clear error on write. */ - -/* Bit 0 : A start bit is received while the previous data still lies in RXD. (Data loss). */ -#define UART_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */ -#define UART_ERRORSRC_OVERRUN_Msk (0x1UL << UART_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */ -#define UART_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */ -#define UART_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */ -#define UART_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */ - -/* Register: UART_ENABLE */ -/* Description: Enable UART and acquire IOs. */ - -/* Bits 2..0 : Enable or disable UART and acquire IOs. */ -#define UART_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ -#define UART_ENABLE_ENABLE_Msk (0x7UL << UART_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ -#define UART_ENABLE_ENABLE_Disabled (0x00UL) /*!< UART disabled. */ -#define UART_ENABLE_ENABLE_Enabled (0x04UL) /*!< UART enabled. */ - -/* Register: UART_RXD */ -/* Description: RXD register. On read action the buffer pointer is displaced. Once read the character is consumed. If read when no character available, the UART will stop working. */ - -/* Bits 7..0 : RX data from previous transfer. Double buffered. */ -#define UART_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ -#define UART_RXD_RXD_Msk (0xFFUL << UART_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ - -/* Register: UART_TXD */ -/* Description: TXD register. */ - -/* Bits 7..0 : TX data for transfer. */ -#define UART_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ -#define UART_TXD_TXD_Msk (0xFFUL << UART_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ - -/* Register: UART_BAUDRATE */ -/* Description: UART Baudrate. */ - -/* Bits 31..0 : UART baudrate. */ -#define UART_BAUDRATE_BAUDRATE_Pos (0UL) /*!< Position of BAUDRATE field. */ -#define UART_BAUDRATE_BAUDRATE_Msk (0xFFFFFFFFUL << UART_BAUDRATE_BAUDRATE_Pos) /*!< Bit mask of BAUDRATE field. */ -#define UART_BAUDRATE_BAUDRATE_Baud1200 (0x0004F000UL) /*!< 1200 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud2400 (0x0009D000UL) /*!< 2400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud4800 (0x0013B000UL) /*!< 4800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud9600 (0x00275000UL) /*!< 9600 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud14400 (0x003B0000UL) /*!< 14400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud19200 (0x004EA000UL) /*!< 19200 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud28800 (0x0075F000UL) /*!< 28800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud38400 (0x009D5000UL) /*!< 38400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud57600 (0x00EBF000UL) /*!< 57600 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud76800 (0x013A9000UL) /*!< 76800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud115200 (0x01D7E000UL) /*!< 115200 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud230400 (0x03AFB000UL) /*!< 230400 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud250000 (0x04000000UL) /*!< 250000 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud460800 (0x075F7000UL) /*!< 460800 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud921600 (0x0EBED000UL) /*!< 921600 baud. */ -#define UART_BAUDRATE_BAUDRATE_Baud1M (0x10000000UL) /*!< 1M baud. */ - -/* Register: UART_CONFIG */ -/* Description: Configuration of parity and hardware flow control register. */ - -/* Bits 3..1 : Include parity bit. */ -#define UART_CONFIG_PARITY_Pos (1UL) /*!< Position of PARITY field. */ -#define UART_CONFIG_PARITY_Msk (0x7UL << UART_CONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */ -#define UART_CONFIG_PARITY_Excluded (0UL) /*!< Parity bit excluded. */ -#define UART_CONFIG_PARITY_Included (7UL) /*!< Parity bit included. */ - -/* Bit 0 : Hardware flow control. */ -#define UART_CONFIG_HWFC_Pos (0UL) /*!< Position of HWFC field. */ -#define UART_CONFIG_HWFC_Msk (0x1UL << UART_CONFIG_HWFC_Pos) /*!< Bit mask of HWFC field. */ -#define UART_CONFIG_HWFC_Disabled (0UL) /*!< Hardware flow control disabled. */ -#define UART_CONFIG_HWFC_Enabled (1UL) /*!< Hardware flow control enabled. */ - -/* Register: UART_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define UART_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define UART_POWER_POWER_Msk (0x1UL << UART_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define UART_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define UART_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/* Peripheral: UICR */ -/* Description: User Information Configuration. */ - -/* Register: UICR_RBPCONF */ -/* Description: Readback protection configuration. */ - -/* Bits 15..8 : Readback protect all code in the device. */ -#define UICR_RBPCONF_PALL_Pos (8UL) /*!< Position of PALL field. */ -#define UICR_RBPCONF_PALL_Msk (0xFFUL << UICR_RBPCONF_PALL_Pos) /*!< Bit mask of PALL field. */ -#define UICR_RBPCONF_PALL_Enabled (0x00UL) /*!< Enabled. */ -#define UICR_RBPCONF_PALL_Disabled (0xFFUL) /*!< Disabled. */ - -/* Bits 7..0 : Readback protect region 0. Will be ignored if pre-programmed factory code is present on the chip. */ -#define UICR_RBPCONF_PR0_Pos (0UL) /*!< Position of PR0 field. */ -#define UICR_RBPCONF_PR0_Msk (0xFFUL << UICR_RBPCONF_PR0_Pos) /*!< Bit mask of PR0 field. */ -#define UICR_RBPCONF_PR0_Enabled (0x00UL) /*!< Enabled. */ -#define UICR_RBPCONF_PR0_Disabled (0xFFUL) /*!< Disabled. */ - -/* Register: UICR_XTALFREQ */ -/* Description: Reset value for CLOCK XTALFREQ register. */ - -/* Bits 7..0 : Reset value for CLOCK XTALFREQ register. */ -#define UICR_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ -#define UICR_XTALFREQ_XTALFREQ_Msk (0xFFUL << UICR_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ -#define UICR_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz Xtal is used. */ -#define UICR_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz Xtal is used. */ - -/* Register: UICR_FWID */ -/* Description: Firmware ID. */ - -/* Bits 15..0 : Identification number for the firmware loaded into the chip. */ -#define UICR_FWID_FWID_Pos (0UL) /*!< Position of FWID field. */ -#define UICR_FWID_FWID_Msk (0xFFFFUL << UICR_FWID_FWID_Pos) /*!< Bit mask of FWID field. */ - - -/* Peripheral: WDT */ -/* Description: Watchdog Timer. */ - -/* Register: WDT_INTENSET */ -/* Description: Interrupt enable set register. */ - -/* Bit 0 : Enable interrupt on TIMEOUT event. */ -#define WDT_INTENSET_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ -#define WDT_INTENSET_TIMEOUT_Msk (0x1UL << WDT_INTENSET_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ -#define WDT_INTENSET_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ -#define WDT_INTENSET_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ -#define WDT_INTENSET_TIMEOUT_Set (1UL) /*!< Enable interrupt on write. */ - -/* Register: WDT_INTENCLR */ -/* Description: Interrupt enable clear register. */ - -/* Bit 0 : Disable interrupt on TIMEOUT event. */ -#define WDT_INTENCLR_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ -#define WDT_INTENCLR_TIMEOUT_Msk (0x1UL << WDT_INTENCLR_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ -#define WDT_INTENCLR_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ -#define WDT_INTENCLR_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ -#define WDT_INTENCLR_TIMEOUT_Clear (1UL) /*!< Disable interrupt on write. */ - -/* Register: WDT_RUNSTATUS */ -/* Description: Watchdog running status. */ - -/* Bit 0 : Watchdog running status. */ -#define WDT_RUNSTATUS_RUNSTATUS_Pos (0UL) /*!< Position of RUNSTATUS field. */ -#define WDT_RUNSTATUS_RUNSTATUS_Msk (0x1UL << WDT_RUNSTATUS_RUNSTATUS_Pos) /*!< Bit mask of RUNSTATUS field. */ -#define WDT_RUNSTATUS_RUNSTATUS_NotRunning (0UL) /*!< Watchdog timer is not running. */ -#define WDT_RUNSTATUS_RUNSTATUS_Running (1UL) /*!< Watchdog timer is running. */ - -/* Register: WDT_REQSTATUS */ -/* Description: Request status. */ - -/* Bit 7 : Request status for RR[7]. */ -#define WDT_REQSTATUS_RR7_Pos (7UL) /*!< Position of RR7 field. */ -#define WDT_REQSTATUS_RR7_Msk (0x1UL << WDT_REQSTATUS_RR7_Pos) /*!< Bit mask of RR7 field. */ -#define WDT_REQSTATUS_RR7_DisabledOrRequested (0UL) /*!< RR[7] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR7_EnabledAndUnrequested (1UL) /*!< RR[7] register is enabled and has not jet requested. */ - -/* Bit 6 : Request status for RR[6]. */ -#define WDT_REQSTATUS_RR6_Pos (6UL) /*!< Position of RR6 field. */ -#define WDT_REQSTATUS_RR6_Msk (0x1UL << WDT_REQSTATUS_RR6_Pos) /*!< Bit mask of RR6 field. */ -#define WDT_REQSTATUS_RR6_DisabledOrRequested (0UL) /*!< RR[6] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR6_EnabledAndUnrequested (1UL) /*!< RR[6] register is enabled and has not jet requested. */ - -/* Bit 5 : Request status for RR[5]. */ -#define WDT_REQSTATUS_RR5_Pos (5UL) /*!< Position of RR5 field. */ -#define WDT_REQSTATUS_RR5_Msk (0x1UL << WDT_REQSTATUS_RR5_Pos) /*!< Bit mask of RR5 field. */ -#define WDT_REQSTATUS_RR5_DisabledOrRequested (0UL) /*!< RR[5] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR5_EnabledAndUnrequested (1UL) /*!< RR[5] register is enabled and has not jet requested. */ - -/* Bit 4 : Request status for RR[4]. */ -#define WDT_REQSTATUS_RR4_Pos (4UL) /*!< Position of RR4 field. */ -#define WDT_REQSTATUS_RR4_Msk (0x1UL << WDT_REQSTATUS_RR4_Pos) /*!< Bit mask of RR4 field. */ -#define WDT_REQSTATUS_RR4_DisabledOrRequested (0UL) /*!< RR[4] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR4_EnabledAndUnrequested (1UL) /*!< RR[4] register is enabled and has not jet requested. */ - -/* Bit 3 : Request status for RR[3]. */ -#define WDT_REQSTATUS_RR3_Pos (3UL) /*!< Position of RR3 field. */ -#define WDT_REQSTATUS_RR3_Msk (0x1UL << WDT_REQSTATUS_RR3_Pos) /*!< Bit mask of RR3 field. */ -#define WDT_REQSTATUS_RR3_DisabledOrRequested (0UL) /*!< RR[3] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR3_EnabledAndUnrequested (1UL) /*!< RR[3] register is enabled and has not jet requested. */ - -/* Bit 2 : Request status for RR[2]. */ -#define WDT_REQSTATUS_RR2_Pos (2UL) /*!< Position of RR2 field. */ -#define WDT_REQSTATUS_RR2_Msk (0x1UL << WDT_REQSTATUS_RR2_Pos) /*!< Bit mask of RR2 field. */ -#define WDT_REQSTATUS_RR2_DisabledOrRequested (0UL) /*!< RR[2] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR2_EnabledAndUnrequested (1UL) /*!< RR[2] register is enabled and has not jet requested. */ - -/* Bit 1 : Request status for RR[1]. */ -#define WDT_REQSTATUS_RR1_Pos (1UL) /*!< Position of RR1 field. */ -#define WDT_REQSTATUS_RR1_Msk (0x1UL << WDT_REQSTATUS_RR1_Pos) /*!< Bit mask of RR1 field. */ -#define WDT_REQSTATUS_RR1_DisabledOrRequested (0UL) /*!< RR[1] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR1_EnabledAndUnrequested (1UL) /*!< RR[1] register is enabled and has not jet requested. */ - -/* Bit 0 : Request status for RR[0]. */ -#define WDT_REQSTATUS_RR0_Pos (0UL) /*!< Position of RR0 field. */ -#define WDT_REQSTATUS_RR0_Msk (0x1UL << WDT_REQSTATUS_RR0_Pos) /*!< Bit mask of RR0 field. */ -#define WDT_REQSTATUS_RR0_DisabledOrRequested (0UL) /*!< RR[0] register is not enabled or has already requested reload. */ -#define WDT_REQSTATUS_RR0_EnabledAndUnrequested (1UL) /*!< RR[0] register is enabled and has not jet requested. */ - -/* Register: WDT_RREN */ -/* Description: Reload request enable. */ - -/* Bit 7 : Enable or disable RR[7] register. */ -#define WDT_RREN_RR7_Pos (7UL) /*!< Position of RR7 field. */ -#define WDT_RREN_RR7_Msk (0x1UL << WDT_RREN_RR7_Pos) /*!< Bit mask of RR7 field. */ -#define WDT_RREN_RR7_Disabled (0UL) /*!< RR[7] register is disabled. */ -#define WDT_RREN_RR7_Enabled (1UL) /*!< RR[7] register is enabled. */ - -/* Bit 6 : Enable or disable RR[6] register. */ -#define WDT_RREN_RR6_Pos (6UL) /*!< Position of RR6 field. */ -#define WDT_RREN_RR6_Msk (0x1UL << WDT_RREN_RR6_Pos) /*!< Bit mask of RR6 field. */ -#define WDT_RREN_RR6_Disabled (0UL) /*!< RR[6] register is disabled. */ -#define WDT_RREN_RR6_Enabled (1UL) /*!< RR[6] register is enabled. */ - -/* Bit 5 : Enable or disable RR[5] register. */ -#define WDT_RREN_RR5_Pos (5UL) /*!< Position of RR5 field. */ -#define WDT_RREN_RR5_Msk (0x1UL << WDT_RREN_RR5_Pos) /*!< Bit mask of RR5 field. */ -#define WDT_RREN_RR5_Disabled (0UL) /*!< RR[5] register is disabled. */ -#define WDT_RREN_RR5_Enabled (1UL) /*!< RR[5] register is enabled. */ - -/* Bit 4 : Enable or disable RR[4] register. */ -#define WDT_RREN_RR4_Pos (4UL) /*!< Position of RR4 field. */ -#define WDT_RREN_RR4_Msk (0x1UL << WDT_RREN_RR4_Pos) /*!< Bit mask of RR4 field. */ -#define WDT_RREN_RR4_Disabled (0UL) /*!< RR[4] register is disabled. */ -#define WDT_RREN_RR4_Enabled (1UL) /*!< RR[4] register is enabled. */ - -/* Bit 3 : Enable or disable RR[3] register. */ -#define WDT_RREN_RR3_Pos (3UL) /*!< Position of RR3 field. */ -#define WDT_RREN_RR3_Msk (0x1UL << WDT_RREN_RR3_Pos) /*!< Bit mask of RR3 field. */ -#define WDT_RREN_RR3_Disabled (0UL) /*!< RR[3] register is disabled. */ -#define WDT_RREN_RR3_Enabled (1UL) /*!< RR[3] register is enabled. */ - -/* Bit 2 : Enable or disable RR[2] register. */ -#define WDT_RREN_RR2_Pos (2UL) /*!< Position of RR2 field. */ -#define WDT_RREN_RR2_Msk (0x1UL << WDT_RREN_RR2_Pos) /*!< Bit mask of RR2 field. */ -#define WDT_RREN_RR2_Disabled (0UL) /*!< RR[2] register is disabled. */ -#define WDT_RREN_RR2_Enabled (1UL) /*!< RR[2] register is enabled. */ - -/* Bit 1 : Enable or disable RR[1] register. */ -#define WDT_RREN_RR1_Pos (1UL) /*!< Position of RR1 field. */ -#define WDT_RREN_RR1_Msk (0x1UL << WDT_RREN_RR1_Pos) /*!< Bit mask of RR1 field. */ -#define WDT_RREN_RR1_Disabled (0UL) /*!< RR[1] register is disabled. */ -#define WDT_RREN_RR1_Enabled (1UL) /*!< RR[1] register is enabled. */ - -/* Bit 0 : Enable or disable RR[0] register. */ -#define WDT_RREN_RR0_Pos (0UL) /*!< Position of RR0 field. */ -#define WDT_RREN_RR0_Msk (0x1UL << WDT_RREN_RR0_Pos) /*!< Bit mask of RR0 field. */ -#define WDT_RREN_RR0_Disabled (0UL) /*!< RR[0] register is disabled. */ -#define WDT_RREN_RR0_Enabled (1UL) /*!< RR[0] register is enabled. */ - -/* Register: WDT_CONFIG */ -/* Description: Configuration register. */ - -/* Bit 3 : Configure the watchdog to pause or not while the CPU is halted by the debugger. */ -#define WDT_CONFIG_HALT_Pos (3UL) /*!< Position of HALT field. */ -#define WDT_CONFIG_HALT_Msk (0x1UL << WDT_CONFIG_HALT_Pos) /*!< Bit mask of HALT field. */ -#define WDT_CONFIG_HALT_Pause (0UL) /*!< Pause watchdog while the CPU is halted by the debugger. */ -#define WDT_CONFIG_HALT_Run (1UL) /*!< Do not pause watchdog while the CPU is halted by the debugger. */ - -/* Bit 0 : Configure the watchdog to pause or not while the CPU is sleeping. */ -#define WDT_CONFIG_SLEEP_Pos (0UL) /*!< Position of SLEEP field. */ -#define WDT_CONFIG_SLEEP_Msk (0x1UL << WDT_CONFIG_SLEEP_Pos) /*!< Bit mask of SLEEP field. */ -#define WDT_CONFIG_SLEEP_Pause (0UL) /*!< Pause watchdog while the CPU is asleep. */ -#define WDT_CONFIG_SLEEP_Run (1UL) /*!< Do not pause watchdog while the CPU is asleep. */ - -/* Register: WDT_RR */ -/* Description: Reload requests registers. */ - -/* Bits 31..0 : Reload register. */ -#define WDT_RR_RR_Pos (0UL) /*!< Position of RR field. */ -#define WDT_RR_RR_Msk (0xFFFFFFFFUL << WDT_RR_RR_Pos) /*!< Bit mask of RR field. */ -#define WDT_RR_RR_Reload (0x6E524635UL) /*!< Value to request a reload of the watchdog timer. */ - -/* Register: WDT_POWER */ -/* Description: Peripheral power control. */ - -/* Bit 0 : Peripheral power control. */ -#define WDT_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ -#define WDT_POWER_POWER_Msk (0x1UL << WDT_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ -#define WDT_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ -#define WDT_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ - - -/*lint --flb "Leave library region" */ -#endif +/* Copyright (c) 2015, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Nordic Semiconductor ASA nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef __NRF51_BITS_H
+#define __NRF51_BITS_H
+
+/*lint ++flb "Enter library region" */
+
+/* Peripheral: AAR */
+/* Description: Accelerated Address Resolver. */
+
+/* Register: AAR_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 2 : Enable interrupt on NOTRESOLVED event. */
+#define AAR_INTENSET_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */
+#define AAR_INTENSET_NOTRESOLVED_Msk (0x1UL << AAR_INTENSET_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */
+#define AAR_INTENSET_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */
+#define AAR_INTENSET_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */
+#define AAR_INTENSET_NOTRESOLVED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on RESOLVED event. */
+#define AAR_INTENSET_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */
+#define AAR_INTENSET_RESOLVED_Msk (0x1UL << AAR_INTENSET_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */
+#define AAR_INTENSET_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */
+#define AAR_INTENSET_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */
+#define AAR_INTENSET_RESOLVED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on END event. */
+#define AAR_INTENSET_END_Pos (0UL) /*!< Position of END field. */
+#define AAR_INTENSET_END_Msk (0x1UL << AAR_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define AAR_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define AAR_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define AAR_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: AAR_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 2 : Disable interrupt on NOTRESOLVED event. */
+#define AAR_INTENCLR_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */
+#define AAR_INTENCLR_NOTRESOLVED_Msk (0x1UL << AAR_INTENCLR_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */
+#define AAR_INTENCLR_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */
+#define AAR_INTENCLR_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */
+#define AAR_INTENCLR_NOTRESOLVED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on RESOLVED event. */
+#define AAR_INTENCLR_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */
+#define AAR_INTENCLR_RESOLVED_Msk (0x1UL << AAR_INTENCLR_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */
+#define AAR_INTENCLR_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */
+#define AAR_INTENCLR_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */
+#define AAR_INTENCLR_RESOLVED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on ENDKSGEN event. */
+#define AAR_INTENCLR_END_Pos (0UL) /*!< Position of END field. */
+#define AAR_INTENCLR_END_Msk (0x1UL << AAR_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define AAR_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define AAR_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define AAR_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: AAR_STATUS */
+/* Description: Resolution status. */
+
+/* Bits 3..0 : The IRK used last time an address was resolved. */
+#define AAR_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */
+#define AAR_STATUS_STATUS_Msk (0xFUL << AAR_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */
+
+/* Register: AAR_ENABLE */
+/* Description: Enable AAR. */
+
+/* Bits 1..0 : Enable AAR. */
+#define AAR_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define AAR_ENABLE_ENABLE_Msk (0x3UL << AAR_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define AAR_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled AAR. */
+#define AAR_ENABLE_ENABLE_Enabled (0x03UL) /*!< Enable AAR. */
+
+/* Register: AAR_NIRK */
+/* Description: Number of Identity root Keys in the IRK data structure. */
+
+/* Bits 4..0 : Number of Identity root Keys in the IRK data structure. */
+#define AAR_NIRK_NIRK_Pos (0UL) /*!< Position of NIRK field. */
+#define AAR_NIRK_NIRK_Msk (0x1FUL << AAR_NIRK_NIRK_Pos) /*!< Bit mask of NIRK field. */
+
+/* Register: AAR_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define AAR_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define AAR_POWER_POWER_Msk (0x1UL << AAR_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define AAR_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define AAR_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: ADC */
+/* Description: Analog to digital converter. */
+
+/* Register: ADC_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 0 : Enable interrupt on END event. */
+#define ADC_INTENSET_END_Pos (0UL) /*!< Position of END field. */
+#define ADC_INTENSET_END_Msk (0x1UL << ADC_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define ADC_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define ADC_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define ADC_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: ADC_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 0 : Disable interrupt on END event. */
+#define ADC_INTENCLR_END_Pos (0UL) /*!< Position of END field. */
+#define ADC_INTENCLR_END_Msk (0x1UL << ADC_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define ADC_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define ADC_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define ADC_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: ADC_BUSY */
+/* Description: ADC busy register. */
+
+/* Bit 0 : ADC busy register. */
+#define ADC_BUSY_BUSY_Pos (0UL) /*!< Position of BUSY field. */
+#define ADC_BUSY_BUSY_Msk (0x1UL << ADC_BUSY_BUSY_Pos) /*!< Bit mask of BUSY field. */
+#define ADC_BUSY_BUSY_Ready (0UL) /*!< No ongoing ADC conversion is taking place. ADC is ready. */
+#define ADC_BUSY_BUSY_Busy (1UL) /*!< An ADC conversion is taking place. ADC is busy. */
+
+/* Register: ADC_ENABLE */
+/* Description: ADC enable. */
+
+/* Bits 1..0 : ADC enable. */
+#define ADC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define ADC_ENABLE_ENABLE_Msk (0x3UL << ADC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define ADC_ENABLE_ENABLE_Disabled (0x00UL) /*!< ADC is disabled. */
+#define ADC_ENABLE_ENABLE_Enabled (0x01UL) /*!< ADC is enabled. If an analog input pin is selected as source of the conversion, the selected pin is configured as an analog input. */
+
+/* Register: ADC_CONFIG */
+/* Description: ADC configuration register. */
+
+/* Bits 17..16 : ADC external reference pin selection. */
+#define ADC_CONFIG_EXTREFSEL_Pos (16UL) /*!< Position of EXTREFSEL field. */
+#define ADC_CONFIG_EXTREFSEL_Msk (0x3UL << ADC_CONFIG_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */
+#define ADC_CONFIG_EXTREFSEL_None (0UL) /*!< Analog external reference inputs disabled. */
+#define ADC_CONFIG_EXTREFSEL_AnalogReference0 (1UL) /*!< Use analog reference 0 as reference. */
+#define ADC_CONFIG_EXTREFSEL_AnalogReference1 (2UL) /*!< Use analog reference 1 as reference. */
+
+/* Bits 15..8 : ADC analog pin selection. */
+#define ADC_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */
+#define ADC_CONFIG_PSEL_Msk (0xFFUL << ADC_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */
+#define ADC_CONFIG_PSEL_Disabled (0UL) /*!< Analog input pins disabled. */
+#define ADC_CONFIG_PSEL_AnalogInput0 (1UL) /*!< Use analog input 0 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput1 (2UL) /*!< Use analog input 1 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput2 (4UL) /*!< Use analog input 2 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput3 (8UL) /*!< Use analog input 3 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput4 (16UL) /*!< Use analog input 4 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput5 (32UL) /*!< Use analog input 5 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput6 (64UL) /*!< Use analog input 6 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput7 (128UL) /*!< Use analog input 7 as analog input. */
+
+/* Bits 6..5 : ADC reference selection. */
+#define ADC_CONFIG_REFSEL_Pos (5UL) /*!< Position of REFSEL field. */
+#define ADC_CONFIG_REFSEL_Msk (0x3UL << ADC_CONFIG_REFSEL_Pos) /*!< Bit mask of REFSEL field. */
+#define ADC_CONFIG_REFSEL_VBG (0x00UL) /*!< Use internal 1.2V bandgap voltage as reference for conversion. */
+#define ADC_CONFIG_REFSEL_External (0x01UL) /*!< Use external source configured by EXTREFSEL as reference for conversion. */
+#define ADC_CONFIG_REFSEL_SupplyOneHalfPrescaling (0x02UL) /*!< Use supply voltage with 1/2 prescaling as reference for conversion. Only usable when supply voltage is between 1.7V and 2.6V. */
+#define ADC_CONFIG_REFSEL_SupplyOneThirdPrescaling (0x03UL) /*!< Use supply voltage with 1/3 prescaling as reference for conversion. Only usable when supply voltage is between 2.5V and 3.6V. */
+
+/* Bits 4..2 : ADC input selection. */
+#define ADC_CONFIG_INPSEL_Pos (2UL) /*!< Position of INPSEL field. */
+#define ADC_CONFIG_INPSEL_Msk (0x7UL << ADC_CONFIG_INPSEL_Pos) /*!< Bit mask of INPSEL field. */
+#define ADC_CONFIG_INPSEL_AnalogInputNoPrescaling (0x00UL) /*!< Analog input specified by PSEL with no prescaling used as input for the conversion. */
+#define ADC_CONFIG_INPSEL_AnalogInputTwoThirdsPrescaling (0x01UL) /*!< Analog input specified by PSEL with 2/3 prescaling used as input for the conversion. */
+#define ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling (0x02UL) /*!< Analog input specified by PSEL with 1/3 prescaling used as input for the conversion. */
+#define ADC_CONFIG_INPSEL_SupplyTwoThirdsPrescaling (0x05UL) /*!< Supply voltage with 2/3 prescaling used as input for the conversion. */
+#define ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling (0x06UL) /*!< Supply voltage with 1/3 prescaling used as input for the conversion. */
+
+/* Bits 1..0 : ADC resolution. */
+#define ADC_CONFIG_RES_Pos (0UL) /*!< Position of RES field. */
+#define ADC_CONFIG_RES_Msk (0x3UL << ADC_CONFIG_RES_Pos) /*!< Bit mask of RES field. */
+#define ADC_CONFIG_RES_8bit (0x00UL) /*!< 8bit ADC resolution. */
+#define ADC_CONFIG_RES_9bit (0x01UL) /*!< 9bit ADC resolution. */
+#define ADC_CONFIG_RES_10bit (0x02UL) /*!< 10bit ADC resolution. */
+
+/* Register: ADC_RESULT */
+/* Description: Result of ADC conversion. */
+
+/* Bits 9..0 : Result of ADC conversion. */
+#define ADC_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */
+#define ADC_RESULT_RESULT_Msk (0x3FFUL << ADC_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */
+
+/* Register: ADC_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define ADC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define ADC_POWER_POWER_Msk (0x1UL << ADC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define ADC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define ADC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: AMLI */
+/* Description: AHB Multi-Layer Interface. */
+
+/* Register: AMLI_RAMPRI_CPU0 */
+/* Description: Configurable priority configuration register for CPU0. */
+
+/* Bits 31..28 : Configuration field for RAM block 7. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_CPU0_RAM7_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 27..24 : Configuration field for RAM block 6. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_CPU0_RAM6_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 23..20 : Configuration field for RAM block 5. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_CPU0_RAM5_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 19..16 : Configuration field for RAM block 4. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_CPU0_RAM4_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 15..12 : Configuration field for RAM block 3. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_CPU0_RAM3_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 11..8 : Configuration field for RAM block 2. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_CPU0_RAM2_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 7..4 : Configuration field for RAM block 1. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_CPU0_RAM1_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 3..0 : Configuration field for RAM block 0. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_CPU0_RAM0_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Register: AMLI_RAMPRI_SPIS1 */
+/* Description: Configurable priority configuration register for SPIS1. */
+
+/* Bits 31..28 : Configuration field for RAM block 7. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 27..24 : Configuration field for RAM block 6. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 23..20 : Configuration field for RAM block 5. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 19..16 : Configuration field for RAM block 4. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 15..12 : Configuration field for RAM block 3. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 11..8 : Configuration field for RAM block 2. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 7..4 : Configuration field for RAM block 1. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 3..0 : Configuration field for RAM block 0. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Register: AMLI_RAMPRI_RADIO */
+/* Description: Configurable priority configuration register for RADIO. */
+
+/* Bits 31..28 : Configuration field for RAM block 7. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_RADIO_RAM7_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 27..24 : Configuration field for RAM block 6. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_RADIO_RAM6_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 23..20 : Configuration field for RAM block 5. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_RADIO_RAM5_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 19..16 : Configuration field for RAM block 4. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_RADIO_RAM4_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 15..12 : Configuration field for RAM block 3. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_RADIO_RAM3_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 11..8 : Configuration field for RAM block 2. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_RADIO_RAM2_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 7..4 : Configuration field for RAM block 1. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_RADIO_RAM1_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 3..0 : Configuration field for RAM block 0. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_RADIO_RAM0_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Register: AMLI_RAMPRI_ECB */
+/* Description: Configurable priority configuration register for ECB. */
+
+/* Bits 31..28 : Configuration field for RAM block 7. */
+#define AMLI_RAMPRI_ECB_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_ECB_RAM7_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 27..24 : Configuration field for RAM block 6. */
+#define AMLI_RAMPRI_ECB_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_ECB_RAM6_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 23..20 : Configuration field for RAM block 5. */
+#define AMLI_RAMPRI_ECB_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_ECB_RAM5_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 19..16 : Configuration field for RAM block 4. */
+#define AMLI_RAMPRI_ECB_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_ECB_RAM4_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 15..12 : Configuration field for RAM block 3. */
+#define AMLI_RAMPRI_ECB_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_ECB_RAM3_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 11..8 : Configuration field for RAM block 2. */
+#define AMLI_RAMPRI_ECB_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_ECB_RAM2_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 7..4 : Configuration field for RAM block 1. */
+#define AMLI_RAMPRI_ECB_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_ECB_RAM1_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 3..0 : Configuration field for RAM block 0. */
+#define AMLI_RAMPRI_ECB_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_ECB_RAM0_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Register: AMLI_RAMPRI_CCM */
+/* Description: Configurable priority configuration register for CCM. */
+
+/* Bits 31..28 : Configuration field for RAM block 7. */
+#define AMLI_RAMPRI_CCM_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_CCM_RAM7_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 27..24 : Configuration field for RAM block 6. */
+#define AMLI_RAMPRI_CCM_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_CCM_RAM6_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 23..20 : Configuration field for RAM block 5. */
+#define AMLI_RAMPRI_CCM_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_CCM_RAM5_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 19..16 : Configuration field for RAM block 4. */
+#define AMLI_RAMPRI_CCM_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_CCM_RAM4_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 15..12 : Configuration field for RAM block 3. */
+#define AMLI_RAMPRI_CCM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_CCM_RAM3_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 11..8 : Configuration field for RAM block 2. */
+#define AMLI_RAMPRI_CCM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_CCM_RAM2_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 7..4 : Configuration field for RAM block 1. */
+#define AMLI_RAMPRI_CCM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_CCM_RAM1_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 3..0 : Configuration field for RAM block 0. */
+#define AMLI_RAMPRI_CCM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_CCM_RAM0_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Register: AMLI_RAMPRI_AAR */
+/* Description: Configurable priority configuration register for AAR. */
+
+/* Bits 31..28 : Configuration field for RAM block 7. */
+#define AMLI_RAMPRI_AAR_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_AAR_RAM7_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 27..24 : Configuration field for RAM block 6. */
+#define AMLI_RAMPRI_AAR_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_AAR_RAM6_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 23..20 : Configuration field for RAM block 5. */
+#define AMLI_RAMPRI_AAR_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_AAR_RAM5_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 19..16 : Configuration field for RAM block 4. */
+#define AMLI_RAMPRI_AAR_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_AAR_RAM4_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 15..12 : Configuration field for RAM block 3. */
+#define AMLI_RAMPRI_AAR_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_AAR_RAM3_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 11..8 : Configuration field for RAM block 2. */
+#define AMLI_RAMPRI_AAR_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_AAR_RAM2_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 7..4 : Configuration field for RAM block 1. */
+#define AMLI_RAMPRI_AAR_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_AAR_RAM1_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 3..0 : Configuration field for RAM block 0. */
+#define AMLI_RAMPRI_AAR_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_AAR_RAM0_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
+
+
+/* Peripheral: CCM */
+/* Description: AES CCM Mode Encryption. */
+
+/* Register: CCM_SHORTS */
+/* Description: Shortcuts for the CCM. */
+
+/* Bit 0 : Shortcut between ENDKSGEN event and CRYPT task. */
+#define CCM_SHORTS_ENDKSGEN_CRYPT_Pos (0UL) /*!< Position of ENDKSGEN_CRYPT field. */
+#define CCM_SHORTS_ENDKSGEN_CRYPT_Msk (0x1UL << CCM_SHORTS_ENDKSGEN_CRYPT_Pos) /*!< Bit mask of ENDKSGEN_CRYPT field. */
+#define CCM_SHORTS_ENDKSGEN_CRYPT_Disabled (0UL) /*!< Shortcut disabled. */
+#define CCM_SHORTS_ENDKSGEN_CRYPT_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: CCM_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 2 : Enable interrupt on ERROR event. */
+#define CCM_INTENSET_ERROR_Pos (2UL) /*!< Position of ERROR field. */
+#define CCM_INTENSET_ERROR_Msk (0x1UL << CCM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define CCM_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
+#define CCM_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
+#define CCM_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on ENDCRYPT event. */
+#define CCM_INTENSET_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */
+#define CCM_INTENSET_ENDCRYPT_Msk (0x1UL << CCM_INTENSET_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */
+#define CCM_INTENSET_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */
+#define CCM_INTENSET_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */
+#define CCM_INTENSET_ENDCRYPT_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on ENDKSGEN event. */
+#define CCM_INTENSET_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */
+#define CCM_INTENSET_ENDKSGEN_Msk (0x1UL << CCM_INTENSET_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */
+#define CCM_INTENSET_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */
+#define CCM_INTENSET_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */
+#define CCM_INTENSET_ENDKSGEN_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: CCM_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 2 : Disable interrupt on ERROR event. */
+#define CCM_INTENCLR_ERROR_Pos (2UL) /*!< Position of ERROR field. */
+#define CCM_INTENCLR_ERROR_Msk (0x1UL << CCM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define CCM_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
+#define CCM_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
+#define CCM_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on ENDCRYPT event. */
+#define CCM_INTENCLR_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */
+#define CCM_INTENCLR_ENDCRYPT_Msk (0x1UL << CCM_INTENCLR_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */
+#define CCM_INTENCLR_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */
+#define CCM_INTENCLR_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */
+#define CCM_INTENCLR_ENDCRYPT_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on ENDKSGEN event. */
+#define CCM_INTENCLR_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */
+#define CCM_INTENCLR_ENDKSGEN_Msk (0x1UL << CCM_INTENCLR_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */
+#define CCM_INTENCLR_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */
+#define CCM_INTENCLR_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */
+#define CCM_INTENCLR_ENDKSGEN_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: CCM_MICSTATUS */
+/* Description: CCM RX MIC check result. */
+
+/* Bit 0 : Result of the MIC check performed during the previous CCM RX STARTCRYPT */
+#define CCM_MICSTATUS_MICSTATUS_Pos (0UL) /*!< Position of MICSTATUS field. */
+#define CCM_MICSTATUS_MICSTATUS_Msk (0x1UL << CCM_MICSTATUS_MICSTATUS_Pos) /*!< Bit mask of MICSTATUS field. */
+#define CCM_MICSTATUS_MICSTATUS_CheckFailed (0UL) /*!< MIC check failed. */
+#define CCM_MICSTATUS_MICSTATUS_CheckPassed (1UL) /*!< MIC check passed. */
+
+/* Register: CCM_ENABLE */
+/* Description: CCM enable. */
+
+/* Bits 1..0 : CCM enable. */
+#define CCM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define CCM_ENABLE_ENABLE_Msk (0x3UL << CCM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define CCM_ENABLE_ENABLE_Disabled (0x00UL) /*!< CCM is disabled. */
+#define CCM_ENABLE_ENABLE_Enabled (0x02UL) /*!< CCM is enabled. */
+
+/* Register: CCM_MODE */
+/* Description: Operation mode. */
+
+/* Bit 0 : CCM mode operation. */
+#define CCM_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */
+#define CCM_MODE_MODE_Msk (0x1UL << CCM_MODE_MODE_Pos) /*!< Bit mask of MODE field. */
+#define CCM_MODE_MODE_Encryption (0UL) /*!< CCM mode TX */
+#define CCM_MODE_MODE_Decryption (1UL) /*!< CCM mode TX */
+
+/* Register: CCM_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define CCM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define CCM_POWER_POWER_Msk (0x1UL << CCM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define CCM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define CCM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: CLOCK */
+/* Description: Clock control. */
+
+/* Register: CLOCK_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 4 : Enable interrupt on CTTO event. */
+#define CLOCK_INTENSET_CTTO_Pos (4UL) /*!< Position of CTTO field. */
+#define CLOCK_INTENSET_CTTO_Msk (0x1UL << CLOCK_INTENSET_CTTO_Pos) /*!< Bit mask of CTTO field. */
+#define CLOCK_INTENSET_CTTO_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENSET_CTTO_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENSET_CTTO_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 3 : Enable interrupt on DONE event. */
+#define CLOCK_INTENSET_DONE_Pos (3UL) /*!< Position of DONE field. */
+#define CLOCK_INTENSET_DONE_Msk (0x1UL << CLOCK_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */
+#define CLOCK_INTENSET_DONE_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENSET_DONE_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENSET_DONE_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on LFCLKSTARTED event. */
+#define CLOCK_INTENSET_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */
+#define CLOCK_INTENSET_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */
+#define CLOCK_INTENSET_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENSET_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENSET_LFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on HFCLKSTARTED event. */
+#define CLOCK_INTENSET_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */
+#define CLOCK_INTENSET_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */
+#define CLOCK_INTENSET_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENSET_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENSET_HFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: CLOCK_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 4 : Disable interrupt on CTTO event. */
+#define CLOCK_INTENCLR_CTTO_Pos (4UL) /*!< Position of CTTO field. */
+#define CLOCK_INTENCLR_CTTO_Msk (0x1UL << CLOCK_INTENCLR_CTTO_Pos) /*!< Bit mask of CTTO field. */
+#define CLOCK_INTENCLR_CTTO_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENCLR_CTTO_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENCLR_CTTO_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 3 : Disable interrupt on DONE event. */
+#define CLOCK_INTENCLR_DONE_Pos (3UL) /*!< Position of DONE field. */
+#define CLOCK_INTENCLR_DONE_Msk (0x1UL << CLOCK_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */
+#define CLOCK_INTENCLR_DONE_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENCLR_DONE_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENCLR_DONE_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on LFCLKSTARTED event. */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on HFCLKSTARTED event. */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: CLOCK_HFCLKRUN */
+/* Description: Task HFCLKSTART trigger status. */
+
+/* Bit 0 : Task HFCLKSTART trigger status. */
+#define CLOCK_HFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */
+#define CLOCK_HFCLKRUN_STATUS_Msk (0x1UL << CLOCK_HFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */
+#define CLOCK_HFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task HFCLKSTART has not been triggered. */
+#define CLOCK_HFCLKRUN_STATUS_Triggered (1UL) /*!< Task HFCLKSTART has been triggered. */
+
+/* Register: CLOCK_HFCLKSTAT */
+/* Description: High frequency clock status. */
+
+/* Bit 16 : State for the HFCLK. */
+#define CLOCK_HFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */
+#define CLOCK_HFCLKSTAT_STATE_Msk (0x1UL << CLOCK_HFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */
+#define CLOCK_HFCLKSTAT_STATE_NotRunning (0UL) /*!< HFCLK clock not running. */
+#define CLOCK_HFCLKSTAT_STATE_Running (1UL) /*!< HFCLK clock running. */
+
+/* Bit 0 : Active clock source for the HF clock. */
+#define CLOCK_HFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */
+#define CLOCK_HFCLKSTAT_SRC_Msk (0x1UL << CLOCK_HFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */
+#define CLOCK_HFCLKSTAT_SRC_RC (0UL) /*!< Internal 16MHz RC oscillator running and generating the HFCLK clock. */
+#define CLOCK_HFCLKSTAT_SRC_Xtal (1UL) /*!< External 16MHz/32MHz crystal oscillator running and generating the HFCLK clock. */
+
+/* Register: CLOCK_LFCLKRUN */
+/* Description: Task LFCLKSTART triggered status. */
+
+/* Bit 0 : Task LFCLKSTART triggered status. */
+#define CLOCK_LFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */
+#define CLOCK_LFCLKRUN_STATUS_Msk (0x1UL << CLOCK_LFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */
+#define CLOCK_LFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task LFCLKSTART has not been triggered. */
+#define CLOCK_LFCLKRUN_STATUS_Triggered (1UL) /*!< Task LFCLKSTART has been triggered. */
+
+/* Register: CLOCK_LFCLKSTAT */
+/* Description: Low frequency clock status. */
+
+/* Bit 16 : State for the LF clock. */
+#define CLOCK_LFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */
+#define CLOCK_LFCLKSTAT_STATE_Msk (0x1UL << CLOCK_LFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */
+#define CLOCK_LFCLKSTAT_STATE_NotRunning (0UL) /*!< LFCLK clock not running. */
+#define CLOCK_LFCLKSTAT_STATE_Running (1UL) /*!< LFCLK clock running. */
+
+/* Bits 1..0 : Active clock source for the LF clock. */
+#define CLOCK_LFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */
+#define CLOCK_LFCLKSTAT_SRC_Msk (0x3UL << CLOCK_LFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */
+#define CLOCK_LFCLKSTAT_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator running and generating the LFCLK clock. */
+#define CLOCK_LFCLKSTAT_SRC_Xtal (1UL) /*!< External 32KiHz crystal oscillator running and generating the LFCLK clock. */
+#define CLOCK_LFCLKSTAT_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from the HFCLK running and generating the LFCLK clock. */
+
+/* Register: CLOCK_LFCLKSRCCOPY */
+/* Description: Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */
+
+/* Bits 1..0 : Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */
+#define CLOCK_LFCLKSRCCOPY_SRC_Pos (0UL) /*!< Position of SRC field. */
+#define CLOCK_LFCLKSRCCOPY_SRC_Msk (0x3UL << CLOCK_LFCLKSRCCOPY_SRC_Pos) /*!< Bit mask of SRC field. */
+#define CLOCK_LFCLKSRCCOPY_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */
+#define CLOCK_LFCLKSRCCOPY_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */
+#define CLOCK_LFCLKSRCCOPY_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */
+
+/* Register: CLOCK_LFCLKSRC */
+/* Description: Clock source for the LFCLK clock. */
+
+/* Bits 1..0 : Clock source. */
+#define CLOCK_LFCLKSRC_SRC_Pos (0UL) /*!< Position of SRC field. */
+#define CLOCK_LFCLKSRC_SRC_Msk (0x3UL << CLOCK_LFCLKSRC_SRC_Pos) /*!< Bit mask of SRC field. */
+#define CLOCK_LFCLKSRC_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */
+#define CLOCK_LFCLKSRC_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */
+#define CLOCK_LFCLKSRC_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */
+
+/* Register: CLOCK_CTIV */
+/* Description: Calibration timer interval. */
+
+/* Bits 6..0 : Calibration timer interval in 0.25s resolution. */
+#define CLOCK_CTIV_CTIV_Pos (0UL) /*!< Position of CTIV field. */
+#define CLOCK_CTIV_CTIV_Msk (0x7FUL << CLOCK_CTIV_CTIV_Pos) /*!< Bit mask of CTIV field. */
+
+/* Register: CLOCK_XTALFREQ */
+/* Description: Crystal frequency. */
+
+/* Bits 7..0 : External Xtal frequency selection. */
+#define CLOCK_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */
+#define CLOCK_XTALFREQ_XTALFREQ_Msk (0xFFUL << CLOCK_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */
+#define CLOCK_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz xtal is used as source for the HFCLK oscillator. */
+#define CLOCK_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz xtal is used as source for the HFCLK oscillator. */
+
+
+/* Peripheral: ECB */
+/* Description: AES ECB Mode Encryption. */
+
+/* Register: ECB_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 1 : Enable interrupt on ERRORECB event. */
+#define ECB_INTENSET_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */
+#define ECB_INTENSET_ERRORECB_Msk (0x1UL << ECB_INTENSET_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */
+#define ECB_INTENSET_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */
+#define ECB_INTENSET_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */
+#define ECB_INTENSET_ERRORECB_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on ENDECB event. */
+#define ECB_INTENSET_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */
+#define ECB_INTENSET_ENDECB_Msk (0x1UL << ECB_INTENSET_ENDECB_Pos) /*!< Bit mask of ENDECB field. */
+#define ECB_INTENSET_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */
+#define ECB_INTENSET_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */
+#define ECB_INTENSET_ENDECB_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: ECB_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 1 : Disable interrupt on ERRORECB event. */
+#define ECB_INTENCLR_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */
+#define ECB_INTENCLR_ERRORECB_Msk (0x1UL << ECB_INTENCLR_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */
+#define ECB_INTENCLR_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */
+#define ECB_INTENCLR_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */
+#define ECB_INTENCLR_ERRORECB_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on ENDECB event. */
+#define ECB_INTENCLR_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */
+#define ECB_INTENCLR_ENDECB_Msk (0x1UL << ECB_INTENCLR_ENDECB_Pos) /*!< Bit mask of ENDECB field. */
+#define ECB_INTENCLR_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */
+#define ECB_INTENCLR_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */
+#define ECB_INTENCLR_ENDECB_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: ECB_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define ECB_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define ECB_POWER_POWER_Msk (0x1UL << ECB_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define ECB_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define ECB_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: FICR */
+/* Description: Factory Information Configuration. */
+
+/* Register: FICR_PPFC */
+/* Description: Pre-programmed factory code present. */
+
+/* Bits 7..0 : Pre-programmed factory code present. */
+#define FICR_PPFC_PPFC_Pos (0UL) /*!< Position of PPFC field. */
+#define FICR_PPFC_PPFC_Msk (0xFFUL << FICR_PPFC_PPFC_Pos) /*!< Bit mask of PPFC field. */
+#define FICR_PPFC_PPFC_Present (0x00UL) /*!< Present. */
+#define FICR_PPFC_PPFC_NotPresent (0xFFUL) /*!< Not present. */
+
+/* Register: FICR_CONFIGID */
+/* Description: Configuration identifier. */
+
+/* Bits 31..16 : Firmware Identification Number pre-loaded into the flash. */
+#define FICR_CONFIGID_FWID_Pos (16UL) /*!< Position of FWID field. */
+#define FICR_CONFIGID_FWID_Msk (0xFFFFUL << FICR_CONFIGID_FWID_Pos) /*!< Bit mask of FWID field. */
+
+/* Bits 15..0 : Hardware Identification Number. */
+#define FICR_CONFIGID_HWID_Pos (0UL) /*!< Position of HWID field. */
+#define FICR_CONFIGID_HWID_Msk (0xFFFFUL << FICR_CONFIGID_HWID_Pos) /*!< Bit mask of HWID field. */
+
+/* Register: FICR_DEVICEADDRTYPE */
+/* Description: Device address type. */
+
+/* Bit 0 : Device address type. */
+#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos (0UL) /*!< Position of DEVICEADDRTYPE field. */
+#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Msk (0x1UL << FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos) /*!< Bit mask of DEVICEADDRTYPE field. */
+#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Public (0UL) /*!< Public address. */
+#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Random (1UL) /*!< Random address. */
+
+/* Register: FICR_OVERRIDEEN */
+/* Description: Radio calibration override enable. */
+
+/* Bit 3 : Override default values for BLE_1Mbit mode. */
+#define FICR_OVERRIDEEN_BLE_1MBIT_Pos (3UL) /*!< Position of BLE_1MBIT field. */
+#define FICR_OVERRIDEEN_BLE_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_BLE_1MBIT_Pos) /*!< Bit mask of BLE_1MBIT field. */
+#define FICR_OVERRIDEEN_BLE_1MBIT_Override (0UL) /*!< Override the default values for BLE_1Mbit mode. */
+#define FICR_OVERRIDEEN_BLE_1MBIT_NotOverride (1UL) /*!< Do not override the default values for BLE_1Mbit mode. */
+
+/* Bit 0 : Override default values for NRF_1Mbit mode. */
+#define FICR_OVERRIDEEN_NRF_1MBIT_Pos (0UL) /*!< Position of NRF_1MBIT field. */
+#define FICR_OVERRIDEEN_NRF_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_NRF_1MBIT_Pos) /*!< Bit mask of NRF_1MBIT field. */
+#define FICR_OVERRIDEEN_NRF_1MBIT_Override (0UL) /*!< Override the default values for NRF_1Mbit mode. */
+#define FICR_OVERRIDEEN_NRF_1MBIT_NotOverride (1UL) /*!< Do not override the default values for NRF_1Mbit mode. */
+
+
+/* Peripheral: GPIO */
+/* Description: General purpose input and output. */
+
+/* Register: GPIO_OUT */
+/* Description: Write GPIO port. */
+
+/* Bit 31 : Pin 31. */
+#define GPIO_OUT_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_OUT_PIN31_Msk (0x1UL << GPIO_OUT_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 30 : Pin 30. */
+#define GPIO_OUT_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_OUT_PIN30_Msk (0x1UL << GPIO_OUT_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 29 : Pin 29. */
+#define GPIO_OUT_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_OUT_PIN29_Msk (0x1UL << GPIO_OUT_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 28 : Pin 28. */
+#define GPIO_OUT_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_OUT_PIN28_Msk (0x1UL << GPIO_OUT_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 27 : Pin 27. */
+#define GPIO_OUT_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_OUT_PIN27_Msk (0x1UL << GPIO_OUT_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 26 : Pin 26. */
+#define GPIO_OUT_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_OUT_PIN26_Msk (0x1UL << GPIO_OUT_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 25 : Pin 25. */
+#define GPIO_OUT_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_OUT_PIN25_Msk (0x1UL << GPIO_OUT_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 24 : Pin 24. */
+#define GPIO_OUT_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_OUT_PIN24_Msk (0x1UL << GPIO_OUT_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 23 : Pin 23. */
+#define GPIO_OUT_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_OUT_PIN23_Msk (0x1UL << GPIO_OUT_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 22 : Pin 22. */
+#define GPIO_OUT_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_OUT_PIN22_Msk (0x1UL << GPIO_OUT_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 21 : Pin 21. */
+#define GPIO_OUT_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_OUT_PIN21_Msk (0x1UL << GPIO_OUT_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 20 : Pin 20. */
+#define GPIO_OUT_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_OUT_PIN20_Msk (0x1UL << GPIO_OUT_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 19 : Pin 19. */
+#define GPIO_OUT_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_OUT_PIN19_Msk (0x1UL << GPIO_OUT_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 18 : Pin 18. */
+#define GPIO_OUT_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_OUT_PIN18_Msk (0x1UL << GPIO_OUT_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 17 : Pin 17. */
+#define GPIO_OUT_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_OUT_PIN17_Msk (0x1UL << GPIO_OUT_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 16 : Pin 16. */
+#define GPIO_OUT_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_OUT_PIN16_Msk (0x1UL << GPIO_OUT_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 15 : Pin 15. */
+#define GPIO_OUT_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_OUT_PIN15_Msk (0x1UL << GPIO_OUT_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 14 : Pin 14. */
+#define GPIO_OUT_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_OUT_PIN14_Msk (0x1UL << GPIO_OUT_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 13 : Pin 13. */
+#define GPIO_OUT_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_OUT_PIN13_Msk (0x1UL << GPIO_OUT_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 12 : Pin 12. */
+#define GPIO_OUT_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_OUT_PIN12_Msk (0x1UL << GPIO_OUT_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 11 : Pin 11. */
+#define GPIO_OUT_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_OUT_PIN11_Msk (0x1UL << GPIO_OUT_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 10 : Pin 10. */
+#define GPIO_OUT_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_OUT_PIN10_Msk (0x1UL << GPIO_OUT_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 9 : Pin 9. */
+#define GPIO_OUT_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_OUT_PIN9_Msk (0x1UL << GPIO_OUT_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 8 : Pin 8. */
+#define GPIO_OUT_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_OUT_PIN8_Msk (0x1UL << GPIO_OUT_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 7 : Pin 7. */
+#define GPIO_OUT_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_OUT_PIN7_Msk (0x1UL << GPIO_OUT_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 6 : Pin 6. */
+#define GPIO_OUT_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_OUT_PIN6_Msk (0x1UL << GPIO_OUT_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 5 : Pin 5. */
+#define GPIO_OUT_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_OUT_PIN5_Msk (0x1UL << GPIO_OUT_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 4 : Pin 4. */
+#define GPIO_OUT_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_OUT_PIN4_Msk (0x1UL << GPIO_OUT_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 3 : Pin 3. */
+#define GPIO_OUT_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_OUT_PIN3_Msk (0x1UL << GPIO_OUT_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 2 : Pin 2. */
+#define GPIO_OUT_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_OUT_PIN2_Msk (0x1UL << GPIO_OUT_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 1 : Pin 1. */
+#define GPIO_OUT_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_OUT_PIN1_Msk (0x1UL << GPIO_OUT_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 0 : Pin 0. */
+#define GPIO_OUT_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_OUT_PIN0_Msk (0x1UL << GPIO_OUT_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */
+
+/* Register: GPIO_OUTSET */
+/* Description: Set individual bits in GPIO port. */
+
+/* Bit 31 : Pin 31. */
+#define GPIO_OUTSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_OUTSET_PIN31_Msk (0x1UL << GPIO_OUTSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_OUTSET_PIN31_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 30 : Pin 30. */
+#define GPIO_OUTSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_OUTSET_PIN30_Msk (0x1UL << GPIO_OUTSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_OUTSET_PIN30_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 29 : Pin 29. */
+#define GPIO_OUTSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_OUTSET_PIN29_Msk (0x1UL << GPIO_OUTSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_OUTSET_PIN29_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 28 : Pin 28. */
+#define GPIO_OUTSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_OUTSET_PIN28_Msk (0x1UL << GPIO_OUTSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_OUTSET_PIN28_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 27 : Pin 27. */
+#define GPIO_OUTSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_OUTSET_PIN27_Msk (0x1UL << GPIO_OUTSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_OUTSET_PIN27_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 26 : Pin 26. */
+#define GPIO_OUTSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_OUTSET_PIN26_Msk (0x1UL << GPIO_OUTSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_OUTSET_PIN26_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 25 : Pin 25. */
+#define GPIO_OUTSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_OUTSET_PIN25_Msk (0x1UL << GPIO_OUTSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_OUTSET_PIN25_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 24 : Pin 24. */
+#define GPIO_OUTSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_OUTSET_PIN24_Msk (0x1UL << GPIO_OUTSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_OUTSET_PIN24_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 23 : Pin 23. */
+#define GPIO_OUTSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_OUTSET_PIN23_Msk (0x1UL << GPIO_OUTSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_OUTSET_PIN23_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 22 : Pin 22. */
+#define GPIO_OUTSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_OUTSET_PIN22_Msk (0x1UL << GPIO_OUTSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_OUTSET_PIN22_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 21 : Pin 21. */
+#define GPIO_OUTSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_OUTSET_PIN21_Msk (0x1UL << GPIO_OUTSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_OUTSET_PIN21_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 20 : Pin 20. */
+#define GPIO_OUTSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_OUTSET_PIN20_Msk (0x1UL << GPIO_OUTSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_OUTSET_PIN20_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 19 : Pin 19. */
+#define GPIO_OUTSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_OUTSET_PIN19_Msk (0x1UL << GPIO_OUTSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_OUTSET_PIN19_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 18 : Pin 18. */
+#define GPIO_OUTSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_OUTSET_PIN18_Msk (0x1UL << GPIO_OUTSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_OUTSET_PIN18_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 17 : Pin 17. */
+#define GPIO_OUTSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_OUTSET_PIN17_Msk (0x1UL << GPIO_OUTSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_OUTSET_PIN17_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 16 : Pin 16. */
+#define GPIO_OUTSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_OUTSET_PIN16_Msk (0x1UL << GPIO_OUTSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_OUTSET_PIN16_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 15 : Pin 15. */
+#define GPIO_OUTSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_OUTSET_PIN15_Msk (0x1UL << GPIO_OUTSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_OUTSET_PIN15_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 14 : Pin 14. */
+#define GPIO_OUTSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_OUTSET_PIN14_Msk (0x1UL << GPIO_OUTSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_OUTSET_PIN14_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 13 : Pin 13. */
+#define GPIO_OUTSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_OUTSET_PIN13_Msk (0x1UL << GPIO_OUTSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_OUTSET_PIN13_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 12 : Pin 12. */
+#define GPIO_OUTSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_OUTSET_PIN12_Msk (0x1UL << GPIO_OUTSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_OUTSET_PIN12_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 11 : Pin 11. */
+#define GPIO_OUTSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_OUTSET_PIN11_Msk (0x1UL << GPIO_OUTSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_OUTSET_PIN11_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN11_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN11_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 10 : Pin 10. */
+#define GPIO_OUTSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_OUTSET_PIN10_Msk (0x1UL << GPIO_OUTSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_OUTSET_PIN10_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN10_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN10_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 9 : Pin 9. */
+#define GPIO_OUTSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_OUTSET_PIN9_Msk (0x1UL << GPIO_OUTSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_OUTSET_PIN9_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN9_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN9_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 8 : Pin 8. */
+#define GPIO_OUTSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_OUTSET_PIN8_Msk (0x1UL << GPIO_OUTSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_OUTSET_PIN8_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN8_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN8_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 7 : Pin 7. */
+#define GPIO_OUTSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_OUTSET_PIN7_Msk (0x1UL << GPIO_OUTSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_OUTSET_PIN7_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN7_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN7_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 6 : Pin 6. */
+#define GPIO_OUTSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_OUTSET_PIN6_Msk (0x1UL << GPIO_OUTSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_OUTSET_PIN6_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN6_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN6_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 5 : Pin 5. */
+#define GPIO_OUTSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_OUTSET_PIN5_Msk (0x1UL << GPIO_OUTSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_OUTSET_PIN5_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN5_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN5_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 4 : Pin 4. */
+#define GPIO_OUTSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_OUTSET_PIN4_Msk (0x1UL << GPIO_OUTSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_OUTSET_PIN4_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN4_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN4_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 3 : Pin 3. */
+#define GPIO_OUTSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_OUTSET_PIN3_Msk (0x1UL << GPIO_OUTSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_OUTSET_PIN3_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN3_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN3_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 2 : Pin 2. */
+#define GPIO_OUTSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_OUTSET_PIN2_Msk (0x1UL << GPIO_OUTSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_OUTSET_PIN2_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN2_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN2_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 1 : Pin 1. */
+#define GPIO_OUTSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_OUTSET_PIN1_Msk (0x1UL << GPIO_OUTSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_OUTSET_PIN1_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN1_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN1_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 0 : Pin 0. */
+#define GPIO_OUTSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_OUTSET_PIN0_Msk (0x1UL << GPIO_OUTSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_OUTSET_PIN0_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN0_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN0_Set (1UL) /*!< Set pin driver high. */
+
+/* Register: GPIO_OUTCLR */
+/* Description: Clear individual bits in GPIO port. */
+
+/* Bit 31 : Pin 31. */
+#define GPIO_OUTCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_OUTCLR_PIN31_Msk (0x1UL << GPIO_OUTCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_OUTCLR_PIN31_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN31_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN31_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 30 : Pin 30. */
+#define GPIO_OUTCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_OUTCLR_PIN30_Msk (0x1UL << GPIO_OUTCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_OUTCLR_PIN30_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN30_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN30_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 29 : Pin 29. */
+#define GPIO_OUTCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_OUTCLR_PIN29_Msk (0x1UL << GPIO_OUTCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_OUTCLR_PIN29_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN29_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN29_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 28 : Pin 28. */
+#define GPIO_OUTCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_OUTCLR_PIN28_Msk (0x1UL << GPIO_OUTCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_OUTCLR_PIN28_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN28_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN28_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 27 : Pin 27. */
+#define GPIO_OUTCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_OUTCLR_PIN27_Msk (0x1UL << GPIO_OUTCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_OUTCLR_PIN27_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN27_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN27_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 26 : Pin 26. */
+#define GPIO_OUTCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_OUTCLR_PIN26_Msk (0x1UL << GPIO_OUTCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_OUTCLR_PIN26_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN26_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN26_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 25 : Pin 25. */
+#define GPIO_OUTCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_OUTCLR_PIN25_Msk (0x1UL << GPIO_OUTCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_OUTCLR_PIN25_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN25_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN25_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 24 : Pin 24. */
+#define GPIO_OUTCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_OUTCLR_PIN24_Msk (0x1UL << GPIO_OUTCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_OUTCLR_PIN24_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN24_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN24_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 23 : Pin 23. */
+#define GPIO_OUTCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_OUTCLR_PIN23_Msk (0x1UL << GPIO_OUTCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_OUTCLR_PIN23_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN23_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN23_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 22 : Pin 22. */
+#define GPIO_OUTCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_OUTCLR_PIN22_Msk (0x1UL << GPIO_OUTCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_OUTCLR_PIN22_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN22_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN22_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 21 : Pin 21. */
+#define GPIO_OUTCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_OUTCLR_PIN21_Msk (0x1UL << GPIO_OUTCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_OUTCLR_PIN21_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN21_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN21_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 20 : Pin 20. */
+#define GPIO_OUTCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_OUTCLR_PIN20_Msk (0x1UL << GPIO_OUTCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_OUTCLR_PIN20_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN20_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN20_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 19 : Pin 19. */
+#define GPIO_OUTCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_OUTCLR_PIN19_Msk (0x1UL << GPIO_OUTCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_OUTCLR_PIN19_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN19_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN19_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 18 : Pin 18. */
+#define GPIO_OUTCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_OUTCLR_PIN18_Msk (0x1UL << GPIO_OUTCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_OUTCLR_PIN18_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN18_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN18_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 17 : Pin 17. */
+#define GPIO_OUTCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_OUTCLR_PIN17_Msk (0x1UL << GPIO_OUTCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_OUTCLR_PIN17_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN17_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN17_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 16 : Pin 16. */
+#define GPIO_OUTCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_OUTCLR_PIN16_Msk (0x1UL << GPIO_OUTCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_OUTCLR_PIN16_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN16_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN16_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 15 : Pin 15. */
+#define GPIO_OUTCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_OUTCLR_PIN15_Msk (0x1UL << GPIO_OUTCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_OUTCLR_PIN15_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN15_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN15_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 14 : Pin 14. */
+#define GPIO_OUTCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_OUTCLR_PIN14_Msk (0x1UL << GPIO_OUTCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_OUTCLR_PIN14_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN14_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN14_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 13 : Pin 13. */
+#define GPIO_OUTCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_OUTCLR_PIN13_Msk (0x1UL << GPIO_OUTCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_OUTCLR_PIN13_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN13_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN13_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 12 : Pin 12. */
+#define GPIO_OUTCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_OUTCLR_PIN12_Msk (0x1UL << GPIO_OUTCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_OUTCLR_PIN12_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN12_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN12_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 11 : Pin 11. */
+#define GPIO_OUTCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_OUTCLR_PIN11_Msk (0x1UL << GPIO_OUTCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_OUTCLR_PIN11_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN11_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN11_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 10 : Pin 10. */
+#define GPIO_OUTCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_OUTCLR_PIN10_Msk (0x1UL << GPIO_OUTCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_OUTCLR_PIN10_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN10_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN10_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 9 : Pin 9. */
+#define GPIO_OUTCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_OUTCLR_PIN9_Msk (0x1UL << GPIO_OUTCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_OUTCLR_PIN9_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN9_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN9_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 8 : Pin 8. */
+#define GPIO_OUTCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_OUTCLR_PIN8_Msk (0x1UL << GPIO_OUTCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_OUTCLR_PIN8_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN8_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN8_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 7 : Pin 7. */
+#define GPIO_OUTCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_OUTCLR_PIN7_Msk (0x1UL << GPIO_OUTCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_OUTCLR_PIN7_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN7_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN7_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 6 : Pin 6. */
+#define GPIO_OUTCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_OUTCLR_PIN6_Msk (0x1UL << GPIO_OUTCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_OUTCLR_PIN6_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN6_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN6_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 5 : Pin 5. */
+#define GPIO_OUTCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_OUTCLR_PIN5_Msk (0x1UL << GPIO_OUTCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_OUTCLR_PIN5_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN5_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN5_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 4 : Pin 4. */
+#define GPIO_OUTCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_OUTCLR_PIN4_Msk (0x1UL << GPIO_OUTCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_OUTCLR_PIN4_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN4_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN4_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 3 : Pin 3. */
+#define GPIO_OUTCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_OUTCLR_PIN3_Msk (0x1UL << GPIO_OUTCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_OUTCLR_PIN3_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN3_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN3_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 2 : Pin 2. */
+#define GPIO_OUTCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_OUTCLR_PIN2_Msk (0x1UL << GPIO_OUTCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_OUTCLR_PIN2_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN2_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN2_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 1 : Pin 1. */
+#define GPIO_OUTCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_OUTCLR_PIN1_Msk (0x1UL << GPIO_OUTCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_OUTCLR_PIN1_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN1_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN1_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 0 : Pin 0. */
+#define GPIO_OUTCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_OUTCLR_PIN0_Msk (0x1UL << GPIO_OUTCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_OUTCLR_PIN0_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN0_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN0_Clear (1UL) /*!< Set pin driver low. */
+
+/* Register: GPIO_IN */
+/* Description: Read GPIO port. */
+
+/* Bit 31 : Pin 31. */
+#define GPIO_IN_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_IN_PIN31_Msk (0x1UL << GPIO_IN_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */
+
+/* Bit 30 : Pin 30. */
+#define GPIO_IN_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_IN_PIN30_Msk (0x1UL << GPIO_IN_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */
+
+/* Bit 29 : Pin 29. */
+#define GPIO_IN_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_IN_PIN29_Msk (0x1UL << GPIO_IN_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */
+
+/* Bit 28 : Pin 28. */
+#define GPIO_IN_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_IN_PIN28_Msk (0x1UL << GPIO_IN_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */
+
+/* Bit 27 : Pin 27. */
+#define GPIO_IN_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_IN_PIN27_Msk (0x1UL << GPIO_IN_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */
+
+/* Bit 26 : Pin 26. */
+#define GPIO_IN_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_IN_PIN26_Msk (0x1UL << GPIO_IN_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */
+
+/* Bit 25 : Pin 25. */
+#define GPIO_IN_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_IN_PIN25_Msk (0x1UL << GPIO_IN_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */
+
+/* Bit 24 : Pin 24. */
+#define GPIO_IN_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_IN_PIN24_Msk (0x1UL << GPIO_IN_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */
+
+/* Bit 23 : Pin 23. */
+#define GPIO_IN_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_IN_PIN23_Msk (0x1UL << GPIO_IN_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */
+
+/* Bit 22 : Pin 22. */
+#define GPIO_IN_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_IN_PIN22_Msk (0x1UL << GPIO_IN_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */
+
+/* Bit 21 : Pin 21. */
+#define GPIO_IN_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_IN_PIN21_Msk (0x1UL << GPIO_IN_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */
+
+/* Bit 20 : Pin 20. */
+#define GPIO_IN_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_IN_PIN20_Msk (0x1UL << GPIO_IN_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */
+
+/* Bit 19 : Pin 19. */
+#define GPIO_IN_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_IN_PIN19_Msk (0x1UL << GPIO_IN_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */
+
+/* Bit 18 : Pin 18. */
+#define GPIO_IN_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_IN_PIN18_Msk (0x1UL << GPIO_IN_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */
+
+/* Bit 17 : Pin 17. */
+#define GPIO_IN_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_IN_PIN17_Msk (0x1UL << GPIO_IN_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */
+
+/* Bit 16 : Pin 16. */
+#define GPIO_IN_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_IN_PIN16_Msk (0x1UL << GPIO_IN_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */
+
+/* Bit 15 : Pin 15. */
+#define GPIO_IN_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_IN_PIN15_Msk (0x1UL << GPIO_IN_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */
+
+/* Bit 14 : Pin 14. */
+#define GPIO_IN_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_IN_PIN14_Msk (0x1UL << GPIO_IN_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */
+
+/* Bit 13 : Pin 13. */
+#define GPIO_IN_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_IN_PIN13_Msk (0x1UL << GPIO_IN_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */
+
+/* Bit 12 : Pin 12. */
+#define GPIO_IN_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_IN_PIN12_Msk (0x1UL << GPIO_IN_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */
+
+/* Bit 11 : Pin 11. */
+#define GPIO_IN_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_IN_PIN11_Msk (0x1UL << GPIO_IN_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */
+
+/* Bit 10 : Pin 10. */
+#define GPIO_IN_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_IN_PIN10_Msk (0x1UL << GPIO_IN_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */
+
+/* Bit 9 : Pin 9. */
+#define GPIO_IN_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_IN_PIN9_Msk (0x1UL << GPIO_IN_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */
+
+/* Bit 8 : Pin 8. */
+#define GPIO_IN_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_IN_PIN8_Msk (0x1UL << GPIO_IN_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */
+
+/* Bit 7 : Pin 7. */
+#define GPIO_IN_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_IN_PIN7_Msk (0x1UL << GPIO_IN_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */
+
+/* Bit 6 : Pin 6. */
+#define GPIO_IN_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_IN_PIN6_Msk (0x1UL << GPIO_IN_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */
+
+/* Bit 5 : Pin 5. */
+#define GPIO_IN_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_IN_PIN5_Msk (0x1UL << GPIO_IN_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */
+
+/* Bit 4 : Pin 4. */
+#define GPIO_IN_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_IN_PIN4_Msk (0x1UL << GPIO_IN_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */
+
+/* Bit 3 : Pin 3. */
+#define GPIO_IN_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_IN_PIN3_Msk (0x1UL << GPIO_IN_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */
+
+/* Bit 2 : Pin 2. */
+#define GPIO_IN_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_IN_PIN2_Msk (0x1UL << GPIO_IN_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */
+
+/* Bit 1 : Pin 1. */
+#define GPIO_IN_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_IN_PIN1_Msk (0x1UL << GPIO_IN_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */
+
+/* Bit 0 : Pin 0. */
+#define GPIO_IN_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_IN_PIN0_Msk (0x1UL << GPIO_IN_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */
+
+/* Register: GPIO_DIR */
+/* Description: Direction of GPIO pins. */
+
+/* Bit 31 : Pin 31. */
+#define GPIO_DIR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_DIR_PIN31_Msk (0x1UL << GPIO_DIR_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN31_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 30 : Pin 30. */
+#define GPIO_DIR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_DIR_PIN30_Msk (0x1UL << GPIO_DIR_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN30_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 29 : Pin 29. */
+#define GPIO_DIR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_DIR_PIN29_Msk (0x1UL << GPIO_DIR_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN29_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 28 : Pin 28. */
+#define GPIO_DIR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_DIR_PIN28_Msk (0x1UL << GPIO_DIR_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN28_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 27 : Pin 27. */
+#define GPIO_DIR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_DIR_PIN27_Msk (0x1UL << GPIO_DIR_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN27_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 26 : Pin 26. */
+#define GPIO_DIR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_DIR_PIN26_Msk (0x1UL << GPIO_DIR_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN26_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 25 : Pin 25. */
+#define GPIO_DIR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_DIR_PIN25_Msk (0x1UL << GPIO_DIR_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN25_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 24 : Pin 24. */
+#define GPIO_DIR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_DIR_PIN24_Msk (0x1UL << GPIO_DIR_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN24_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 23 : Pin 23. */
+#define GPIO_DIR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_DIR_PIN23_Msk (0x1UL << GPIO_DIR_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN23_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 22 : Pin 22. */
+#define GPIO_DIR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_DIR_PIN22_Msk (0x1UL << GPIO_DIR_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN22_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 21 : Pin 21. */
+#define GPIO_DIR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_DIR_PIN21_Msk (0x1UL << GPIO_DIR_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN21_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 20 : Pin 20. */
+#define GPIO_DIR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_DIR_PIN20_Msk (0x1UL << GPIO_DIR_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN20_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 19 : Pin 19. */
+#define GPIO_DIR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_DIR_PIN19_Msk (0x1UL << GPIO_DIR_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN19_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 18 : Pin 18. */
+#define GPIO_DIR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_DIR_PIN18_Msk (0x1UL << GPIO_DIR_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN18_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 17 : Pin 17. */
+#define GPIO_DIR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_DIR_PIN17_Msk (0x1UL << GPIO_DIR_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN17_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 16 : Pin 16. */
+#define GPIO_DIR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_DIR_PIN16_Msk (0x1UL << GPIO_DIR_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN16_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 15 : Pin 15. */
+#define GPIO_DIR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_DIR_PIN15_Msk (0x1UL << GPIO_DIR_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN15_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 14 : Pin 14. */
+#define GPIO_DIR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_DIR_PIN14_Msk (0x1UL << GPIO_DIR_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN14_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 13 : Pin 13. */
+#define GPIO_DIR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_DIR_PIN13_Msk (0x1UL << GPIO_DIR_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN13_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 12 : Pin 12. */
+#define GPIO_DIR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_DIR_PIN12_Msk (0x1UL << GPIO_DIR_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN12_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 11 : Pin 11. */
+#define GPIO_DIR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_DIR_PIN11_Msk (0x1UL << GPIO_DIR_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN11_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 10 : Pin 10. */
+#define GPIO_DIR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_DIR_PIN10_Msk (0x1UL << GPIO_DIR_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN10_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 9 : Pin 9. */
+#define GPIO_DIR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_DIR_PIN9_Msk (0x1UL << GPIO_DIR_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN9_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 8 : Pin 8. */
+#define GPIO_DIR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_DIR_PIN8_Msk (0x1UL << GPIO_DIR_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN8_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 7 : Pin 7. */
+#define GPIO_DIR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_DIR_PIN7_Msk (0x1UL << GPIO_DIR_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN7_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 6 : Pin 6. */
+#define GPIO_DIR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_DIR_PIN6_Msk (0x1UL << GPIO_DIR_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN6_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 5 : Pin 5. */
+#define GPIO_DIR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_DIR_PIN5_Msk (0x1UL << GPIO_DIR_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN5_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 4 : Pin 4. */
+#define GPIO_DIR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_DIR_PIN4_Msk (0x1UL << GPIO_DIR_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN4_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 3 : Pin 3. */
+#define GPIO_DIR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_DIR_PIN3_Msk (0x1UL << GPIO_DIR_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN3_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 2 : Pin 2. */
+#define GPIO_DIR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_DIR_PIN2_Msk (0x1UL << GPIO_DIR_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN2_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 1 : Pin 1. */
+#define GPIO_DIR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_DIR_PIN1_Msk (0x1UL << GPIO_DIR_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN1_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 0 : Pin 0. */
+#define GPIO_DIR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_DIR_PIN0_Msk (0x1UL << GPIO_DIR_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN0_Output (1UL) /*!< Pin set as output. */
+
+/* Register: GPIO_DIRSET */
+/* Description: DIR set register. */
+
+/* Bit 31 : Set as output pin 31. */
+#define GPIO_DIRSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_DIRSET_PIN31_Msk (0x1UL << GPIO_DIRSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_DIRSET_PIN31_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN31_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN31_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 30 : Set as output pin 30. */
+#define GPIO_DIRSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_DIRSET_PIN30_Msk (0x1UL << GPIO_DIRSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_DIRSET_PIN30_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN30_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN30_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 29 : Set as output pin 29. */
+#define GPIO_DIRSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_DIRSET_PIN29_Msk (0x1UL << GPIO_DIRSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_DIRSET_PIN29_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN29_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN29_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 28 : Set as output pin 28. */
+#define GPIO_DIRSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_DIRSET_PIN28_Msk (0x1UL << GPIO_DIRSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_DIRSET_PIN28_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN28_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN28_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 27 : Set as output pin 27. */
+#define GPIO_DIRSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_DIRSET_PIN27_Msk (0x1UL << GPIO_DIRSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_DIRSET_PIN27_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN27_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN27_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 26 : Set as output pin 26. */
+#define GPIO_DIRSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_DIRSET_PIN26_Msk (0x1UL << GPIO_DIRSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_DIRSET_PIN26_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN26_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN26_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 25 : Set as output pin 25. */
+#define GPIO_DIRSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_DIRSET_PIN25_Msk (0x1UL << GPIO_DIRSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_DIRSET_PIN25_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN25_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN25_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 24 : Set as output pin 24. */
+#define GPIO_DIRSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_DIRSET_PIN24_Msk (0x1UL << GPIO_DIRSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_DIRSET_PIN24_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN24_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN24_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 23 : Set as output pin 23. */
+#define GPIO_DIRSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_DIRSET_PIN23_Msk (0x1UL << GPIO_DIRSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_DIRSET_PIN23_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN23_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN23_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 22 : Set as output pin 22. */
+#define GPIO_DIRSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_DIRSET_PIN22_Msk (0x1UL << GPIO_DIRSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_DIRSET_PIN22_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN22_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN22_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 21 : Set as output pin 21. */
+#define GPIO_DIRSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_DIRSET_PIN21_Msk (0x1UL << GPIO_DIRSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_DIRSET_PIN21_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN21_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN21_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 20 : Set as output pin 20. */
+#define GPIO_DIRSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_DIRSET_PIN20_Msk (0x1UL << GPIO_DIRSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_DIRSET_PIN20_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN20_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN20_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 19 : Set as output pin 19. */
+#define GPIO_DIRSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_DIRSET_PIN19_Msk (0x1UL << GPIO_DIRSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_DIRSET_PIN19_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN19_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN19_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 18 : Set as output pin 18. */
+#define GPIO_DIRSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_DIRSET_PIN18_Msk (0x1UL << GPIO_DIRSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_DIRSET_PIN18_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN18_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN18_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 17 : Set as output pin 17. */
+#define GPIO_DIRSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_DIRSET_PIN17_Msk (0x1UL << GPIO_DIRSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_DIRSET_PIN17_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN17_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN17_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 16 : Set as output pin 16. */
+#define GPIO_DIRSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_DIRSET_PIN16_Msk (0x1UL << GPIO_DIRSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_DIRSET_PIN16_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN16_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN16_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 15 : Set as output pin 15. */
+#define GPIO_DIRSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_DIRSET_PIN15_Msk (0x1UL << GPIO_DIRSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_DIRSET_PIN15_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN15_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN15_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 14 : Set as output pin 14. */
+#define GPIO_DIRSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_DIRSET_PIN14_Msk (0x1UL << GPIO_DIRSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_DIRSET_PIN14_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN14_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN14_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 13 : Set as output pin 13. */
+#define GPIO_DIRSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_DIRSET_PIN13_Msk (0x1UL << GPIO_DIRSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_DIRSET_PIN13_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN13_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN13_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 12 : Set as output pin 12. */
+#define GPIO_DIRSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_DIRSET_PIN12_Msk (0x1UL << GPIO_DIRSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_DIRSET_PIN12_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN12_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN12_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 11 : Set as output pin 11. */
+#define GPIO_DIRSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_DIRSET_PIN11_Msk (0x1UL << GPIO_DIRSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_DIRSET_PIN11_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN11_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN11_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 10 : Set as output pin 10. */
+#define GPIO_DIRSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_DIRSET_PIN10_Msk (0x1UL << GPIO_DIRSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_DIRSET_PIN10_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN10_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN10_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 9 : Set as output pin 9. */
+#define GPIO_DIRSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_DIRSET_PIN9_Msk (0x1UL << GPIO_DIRSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_DIRSET_PIN9_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN9_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN9_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 8 : Set as output pin 8. */
+#define GPIO_DIRSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_DIRSET_PIN8_Msk (0x1UL << GPIO_DIRSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_DIRSET_PIN8_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN8_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN8_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 7 : Set as output pin 7. */
+#define GPIO_DIRSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_DIRSET_PIN7_Msk (0x1UL << GPIO_DIRSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_DIRSET_PIN7_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN7_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN7_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 6 : Set as output pin 6. */
+#define GPIO_DIRSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_DIRSET_PIN6_Msk (0x1UL << GPIO_DIRSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_DIRSET_PIN6_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN6_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN6_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 5 : Set as output pin 5. */
+#define GPIO_DIRSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_DIRSET_PIN5_Msk (0x1UL << GPIO_DIRSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_DIRSET_PIN5_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN5_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN5_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 4 : Set as output pin 4. */
+#define GPIO_DIRSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_DIRSET_PIN4_Msk (0x1UL << GPIO_DIRSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_DIRSET_PIN4_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN4_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN4_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 3 : Set as output pin 3. */
+#define GPIO_DIRSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_DIRSET_PIN3_Msk (0x1UL << GPIO_DIRSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_DIRSET_PIN3_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN3_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN3_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 2 : Set as output pin 2. */
+#define GPIO_DIRSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_DIRSET_PIN2_Msk (0x1UL << GPIO_DIRSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_DIRSET_PIN2_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN2_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN2_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 1 : Set as output pin 1. */
+#define GPIO_DIRSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_DIRSET_PIN1_Msk (0x1UL << GPIO_DIRSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_DIRSET_PIN1_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN1_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN1_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 0 : Set as output pin 0. */
+#define GPIO_DIRSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_DIRSET_PIN0_Msk (0x1UL << GPIO_DIRSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_DIRSET_PIN0_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN0_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN0_Set (1UL) /*!< Set pin as output. */
+
+/* Register: GPIO_DIRCLR */
+/* Description: DIR clear register. */
+
+/* Bit 31 : Set as input pin 31. */
+#define GPIO_DIRCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_DIRCLR_PIN31_Msk (0x1UL << GPIO_DIRCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN31_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 30 : Set as input pin 30. */
+#define GPIO_DIRCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_DIRCLR_PIN30_Msk (0x1UL << GPIO_DIRCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN30_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 29 : Set as input pin 29. */
+#define GPIO_DIRCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_DIRCLR_PIN29_Msk (0x1UL << GPIO_DIRCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN29_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 28 : Set as input pin 28. */
+#define GPIO_DIRCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_DIRCLR_PIN28_Msk (0x1UL << GPIO_DIRCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN28_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 27 : Set as input pin 27. */
+#define GPIO_DIRCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_DIRCLR_PIN27_Msk (0x1UL << GPIO_DIRCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN27_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 26 : Set as input pin 26. */
+#define GPIO_DIRCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_DIRCLR_PIN26_Msk (0x1UL << GPIO_DIRCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN26_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 25 : Set as input pin 25. */
+#define GPIO_DIRCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_DIRCLR_PIN25_Msk (0x1UL << GPIO_DIRCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN25_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 24 : Set as input pin 24. */
+#define GPIO_DIRCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_DIRCLR_PIN24_Msk (0x1UL << GPIO_DIRCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN24_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 23 : Set as input pin 23. */
+#define GPIO_DIRCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_DIRCLR_PIN23_Msk (0x1UL << GPIO_DIRCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN23_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 22 : Set as input pin 22. */
+#define GPIO_DIRCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_DIRCLR_PIN22_Msk (0x1UL << GPIO_DIRCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN22_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 21 : Set as input pin 21. */
+#define GPIO_DIRCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_DIRCLR_PIN21_Msk (0x1UL << GPIO_DIRCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN21_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 20 : Set as input pin 20. */
+#define GPIO_DIRCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_DIRCLR_PIN20_Msk (0x1UL << GPIO_DIRCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN20_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 19 : Set as input pin 19. */
+#define GPIO_DIRCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_DIRCLR_PIN19_Msk (0x1UL << GPIO_DIRCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN19_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 18 : Set as input pin 18. */
+#define GPIO_DIRCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_DIRCLR_PIN18_Msk (0x1UL << GPIO_DIRCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN18_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 17 : Set as input pin 17. */
+#define GPIO_DIRCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_DIRCLR_PIN17_Msk (0x1UL << GPIO_DIRCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN17_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 16 : Set as input pin 16. */
+#define GPIO_DIRCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_DIRCLR_PIN16_Msk (0x1UL << GPIO_DIRCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN16_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 15 : Set as input pin 15. */
+#define GPIO_DIRCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_DIRCLR_PIN15_Msk (0x1UL << GPIO_DIRCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN15_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 14 : Set as input pin 14. */
+#define GPIO_DIRCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_DIRCLR_PIN14_Msk (0x1UL << GPIO_DIRCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN14_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 13 : Set as input pin 13. */
+#define GPIO_DIRCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_DIRCLR_PIN13_Msk (0x1UL << GPIO_DIRCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN13_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 12 : Set as input pin 12. */
+#define GPIO_DIRCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_DIRCLR_PIN12_Msk (0x1UL << GPIO_DIRCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN12_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 11 : Set as input pin 11. */
+#define GPIO_DIRCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_DIRCLR_PIN11_Msk (0x1UL << GPIO_DIRCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN11_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 10 : Set as input pin 10. */
+#define GPIO_DIRCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_DIRCLR_PIN10_Msk (0x1UL << GPIO_DIRCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN10_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 9 : Set as input pin 9. */
+#define GPIO_DIRCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_DIRCLR_PIN9_Msk (0x1UL << GPIO_DIRCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN9_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 8 : Set as input pin 8. */
+#define GPIO_DIRCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_DIRCLR_PIN8_Msk (0x1UL << GPIO_DIRCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN8_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 7 : Set as input pin 7. */
+#define GPIO_DIRCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_DIRCLR_PIN7_Msk (0x1UL << GPIO_DIRCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN7_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 6 : Set as input pin 6. */
+#define GPIO_DIRCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_DIRCLR_PIN6_Msk (0x1UL << GPIO_DIRCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN6_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 5 : Set as input pin 5. */
+#define GPIO_DIRCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_DIRCLR_PIN5_Msk (0x1UL << GPIO_DIRCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN5_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 4 : Set as input pin 4. */
+#define GPIO_DIRCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_DIRCLR_PIN4_Msk (0x1UL << GPIO_DIRCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN4_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 3 : Set as input pin 3. */
+#define GPIO_DIRCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_DIRCLR_PIN3_Msk (0x1UL << GPIO_DIRCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN3_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 2 : Set as input pin 2. */
+#define GPIO_DIRCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_DIRCLR_PIN2_Msk (0x1UL << GPIO_DIRCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN2_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 1 : Set as input pin 1. */
+#define GPIO_DIRCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_DIRCLR_PIN1_Msk (0x1UL << GPIO_DIRCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN1_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 0 : Set as input pin 0. */
+#define GPIO_DIRCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_DIRCLR_PIN0_Msk (0x1UL << GPIO_DIRCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN0_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Set pin as input. */
+
+/* Register: GPIO_PIN_CNF */
+/* Description: Configuration of GPIO pins. */
+
+/* Bits 17..16 : Pin sensing mechanism. */
+#define GPIO_PIN_CNF_SENSE_Pos (16UL) /*!< Position of SENSE field. */
+#define GPIO_PIN_CNF_SENSE_Msk (0x3UL << GPIO_PIN_CNF_SENSE_Pos) /*!< Bit mask of SENSE field. */
+#define GPIO_PIN_CNF_SENSE_Disabled (0x00UL) /*!< Disabled. */
+#define GPIO_PIN_CNF_SENSE_High (0x02UL) /*!< Wakeup on high level. */
+#define GPIO_PIN_CNF_SENSE_Low (0x03UL) /*!< Wakeup on low level. */
+
+/* Bits 10..8 : Drive configuration. */
+#define GPIO_PIN_CNF_DRIVE_Pos (8UL) /*!< Position of DRIVE field. */
+#define GPIO_PIN_CNF_DRIVE_Msk (0x7UL << GPIO_PIN_CNF_DRIVE_Pos) /*!< Bit mask of DRIVE field. */
+#define GPIO_PIN_CNF_DRIVE_S0S1 (0x00UL) /*!< Standard '0', Standard '1'. */
+#define GPIO_PIN_CNF_DRIVE_H0S1 (0x01UL) /*!< High '0', Standard '1'. */
+#define GPIO_PIN_CNF_DRIVE_S0H1 (0x02UL) /*!< Standard '0', High '1'. */
+#define GPIO_PIN_CNF_DRIVE_H0H1 (0x03UL) /*!< High '0', High '1'. */
+#define GPIO_PIN_CNF_DRIVE_D0S1 (0x04UL) /*!< Disconnected '0', Standard '1'. */
+#define GPIO_PIN_CNF_DRIVE_D0H1 (0x05UL) /*!< Disconnected '0', High '1'. */
+#define GPIO_PIN_CNF_DRIVE_S0D1 (0x06UL) /*!< Standard '0', Disconnected '1'. */
+#define GPIO_PIN_CNF_DRIVE_H0D1 (0x07UL) /*!< High '0', Disconnected '1'. */
+
+/* Bits 3..2 : Pull-up or -down configuration. */
+#define GPIO_PIN_CNF_PULL_Pos (2UL) /*!< Position of PULL field. */
+#define GPIO_PIN_CNF_PULL_Msk (0x3UL << GPIO_PIN_CNF_PULL_Pos) /*!< Bit mask of PULL field. */
+#define GPIO_PIN_CNF_PULL_Disabled (0x00UL) /*!< No pull. */
+#define GPIO_PIN_CNF_PULL_Pulldown (0x01UL) /*!< Pulldown on pin. */
+#define GPIO_PIN_CNF_PULL_Pullup (0x03UL) /*!< Pullup on pin. */
+
+/* Bit 1 : Connect or disconnect input path. */
+#define GPIO_PIN_CNF_INPUT_Pos (1UL) /*!< Position of INPUT field. */
+#define GPIO_PIN_CNF_INPUT_Msk (0x1UL << GPIO_PIN_CNF_INPUT_Pos) /*!< Bit mask of INPUT field. */
+#define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input pin. */
+#define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input pin. */
+
+/* Bit 0 : Pin direction. */
+#define GPIO_PIN_CNF_DIR_Pos (0UL) /*!< Position of DIR field. */
+#define GPIO_PIN_CNF_DIR_Msk (0x1UL << GPIO_PIN_CNF_DIR_Pos) /*!< Bit mask of DIR field. */
+#define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin. */
+#define GPIO_PIN_CNF_DIR_Output (1UL) /*!< Configure pin as an output pin. */
+
+
+/* Peripheral: GPIOTE */
+/* Description: GPIO tasks and events. */
+
+/* Register: GPIOTE_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 31 : Enable interrupt on PORT event. */
+#define GPIOTE_INTENSET_PORT_Pos (31UL) /*!< Position of PORT field. */
+#define GPIOTE_INTENSET_PORT_Msk (0x1UL << GPIOTE_INTENSET_PORT_Pos) /*!< Bit mask of PORT field. */
+#define GPIOTE_INTENSET_PORT_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENSET_PORT_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENSET_PORT_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 3 : Enable interrupt on IN[3] event. */
+#define GPIOTE_INTENSET_IN3_Pos (3UL) /*!< Position of IN3 field. */
+#define GPIOTE_INTENSET_IN3_Msk (0x1UL << GPIOTE_INTENSET_IN3_Pos) /*!< Bit mask of IN3 field. */
+#define GPIOTE_INTENSET_IN3_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENSET_IN3_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENSET_IN3_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 2 : Enable interrupt on IN[2] event. */
+#define GPIOTE_INTENSET_IN2_Pos (2UL) /*!< Position of IN2 field. */
+#define GPIOTE_INTENSET_IN2_Msk (0x1UL << GPIOTE_INTENSET_IN2_Pos) /*!< Bit mask of IN2 field. */
+#define GPIOTE_INTENSET_IN2_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENSET_IN2_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENSET_IN2_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on IN[1] event. */
+#define GPIOTE_INTENSET_IN1_Pos (1UL) /*!< Position of IN1 field. */
+#define GPIOTE_INTENSET_IN1_Msk (0x1UL << GPIOTE_INTENSET_IN1_Pos) /*!< Bit mask of IN1 field. */
+#define GPIOTE_INTENSET_IN1_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENSET_IN1_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENSET_IN1_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on IN[0] event. */
+#define GPIOTE_INTENSET_IN0_Pos (0UL) /*!< Position of IN0 field. */
+#define GPIOTE_INTENSET_IN0_Msk (0x1UL << GPIOTE_INTENSET_IN0_Pos) /*!< Bit mask of IN0 field. */
+#define GPIOTE_INTENSET_IN0_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENSET_IN0_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENSET_IN0_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: GPIOTE_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 31 : Disable interrupt on PORT event. */
+#define GPIOTE_INTENCLR_PORT_Pos (31UL) /*!< Position of PORT field. */
+#define GPIOTE_INTENCLR_PORT_Msk (0x1UL << GPIOTE_INTENCLR_PORT_Pos) /*!< Bit mask of PORT field. */
+#define GPIOTE_INTENCLR_PORT_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENCLR_PORT_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENCLR_PORT_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 3 : Disable interrupt on IN[3] event. */
+#define GPIOTE_INTENCLR_IN3_Pos (3UL) /*!< Position of IN3 field. */
+#define GPIOTE_INTENCLR_IN3_Msk (0x1UL << GPIOTE_INTENCLR_IN3_Pos) /*!< Bit mask of IN3 field. */
+#define GPIOTE_INTENCLR_IN3_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENCLR_IN3_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENCLR_IN3_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 2 : Disable interrupt on IN[2] event. */
+#define GPIOTE_INTENCLR_IN2_Pos (2UL) /*!< Position of IN2 field. */
+#define GPIOTE_INTENCLR_IN2_Msk (0x1UL << GPIOTE_INTENCLR_IN2_Pos) /*!< Bit mask of IN2 field. */
+#define GPIOTE_INTENCLR_IN2_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENCLR_IN2_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENCLR_IN2_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on IN[1] event. */
+#define GPIOTE_INTENCLR_IN1_Pos (1UL) /*!< Position of IN1 field. */
+#define GPIOTE_INTENCLR_IN1_Msk (0x1UL << GPIOTE_INTENCLR_IN1_Pos) /*!< Bit mask of IN1 field. */
+#define GPIOTE_INTENCLR_IN1_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENCLR_IN1_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENCLR_IN1_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on IN[0] event. */
+#define GPIOTE_INTENCLR_IN0_Pos (0UL) /*!< Position of IN0 field. */
+#define GPIOTE_INTENCLR_IN0_Msk (0x1UL << GPIOTE_INTENCLR_IN0_Pos) /*!< Bit mask of IN0 field. */
+#define GPIOTE_INTENCLR_IN0_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENCLR_IN0_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENCLR_IN0_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: GPIOTE_CONFIG */
+/* Description: Channel configuration registers. */
+
+/* Bit 20 : Initial value of the output when the GPIOTE channel is configured as a Task. */
+#define GPIOTE_CONFIG_OUTINIT_Pos (20UL) /*!< Position of OUTINIT field. */
+#define GPIOTE_CONFIG_OUTINIT_Msk (0x1UL << GPIOTE_CONFIG_OUTINIT_Pos) /*!< Bit mask of OUTINIT field. */
+#define GPIOTE_CONFIG_OUTINIT_Low (0UL) /*!< Initial low output when in task mode. */
+#define GPIOTE_CONFIG_OUTINIT_High (1UL) /*!< Initial high output when in task mode. */
+
+/* Bits 17..16 : Effects on output when in Task mode, or events on input that generates an event. */
+#define GPIOTE_CONFIG_POLARITY_Pos (16UL) /*!< Position of POLARITY field. */
+#define GPIOTE_CONFIG_POLARITY_Msk (0x3UL << GPIOTE_CONFIG_POLARITY_Pos) /*!< Bit mask of POLARITY field. */
+#define GPIOTE_CONFIG_POLARITY_None (0x00UL) /*!< No task or event. */
+#define GPIOTE_CONFIG_POLARITY_LoToHi (0x01UL) /*!< Low to high. */
+#define GPIOTE_CONFIG_POLARITY_HiToLo (0x02UL) /*!< High to low. */
+#define GPIOTE_CONFIG_POLARITY_Toggle (0x03UL) /*!< Toggle. */
+
+/* Bits 12..8 : Pin select. */
+#define GPIOTE_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */
+#define GPIOTE_CONFIG_PSEL_Msk (0x1FUL << GPIOTE_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */
+
+/* Bits 1..0 : Mode */
+#define GPIOTE_CONFIG_MODE_Pos (0UL) /*!< Position of MODE field. */
+#define GPIOTE_CONFIG_MODE_Msk (0x3UL << GPIOTE_CONFIG_MODE_Pos) /*!< Bit mask of MODE field. */
+#define GPIOTE_CONFIG_MODE_Disabled (0x00UL) /*!< Disabled. */
+#define GPIOTE_CONFIG_MODE_Event (0x01UL) /*!< Channel configure in event mode. */
+#define GPIOTE_CONFIG_MODE_Task (0x03UL) /*!< Channel configure in task mode. */
+
+/* Register: GPIOTE_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define GPIOTE_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define GPIOTE_POWER_POWER_Msk (0x1UL << GPIOTE_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define GPIOTE_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define GPIOTE_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: LPCOMP */
+/* Description: Low power comparator. */
+
+/* Register: LPCOMP_SHORTS */
+/* Description: Shortcuts for the LPCOMP. */
+
+/* Bit 4 : Shortcut between CROSS event and STOP task. */
+#define LPCOMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */
+#define LPCOMP_SHORTS_CROSS_STOP_Msk (0x1UL << LPCOMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */
+#define LPCOMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define LPCOMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 3 : Shortcut between UP event and STOP task. */
+#define LPCOMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */
+#define LPCOMP_SHORTS_UP_STOP_Msk (0x1UL << LPCOMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */
+#define LPCOMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define LPCOMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 2 : Shortcut between DOWN event and STOP task. */
+#define LPCOMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */
+#define LPCOMP_SHORTS_DOWN_STOP_Msk (0x1UL << LPCOMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */
+#define LPCOMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define LPCOMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 1 : Shortcut between RADY event and STOP task. */
+#define LPCOMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */
+#define LPCOMP_SHORTS_READY_STOP_Msk (0x1UL << LPCOMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */
+#define LPCOMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define LPCOMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 0 : Shortcut between READY event and SAMPLE task. */
+#define LPCOMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */
+#define LPCOMP_SHORTS_READY_SAMPLE_Msk (0x1UL << LPCOMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */
+#define LPCOMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Shortcut disabled. */
+#define LPCOMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: LPCOMP_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 3 : Enable interrupt on CROSS event. */
+#define LPCOMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */
+#define LPCOMP_INTENSET_CROSS_Msk (0x1UL << LPCOMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */
+#define LPCOMP_INTENSET_CROSS_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENSET_CROSS_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENSET_CROSS_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 2 : Enable interrupt on UP event. */
+#define LPCOMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */
+#define LPCOMP_INTENSET_UP_Msk (0x1UL << LPCOMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */
+#define LPCOMP_INTENSET_UP_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENSET_UP_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENSET_UP_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on DOWN event. */
+#define LPCOMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */
+#define LPCOMP_INTENSET_DOWN_Msk (0x1UL << LPCOMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */
+#define LPCOMP_INTENSET_DOWN_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENSET_DOWN_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENSET_DOWN_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on READY event. */
+#define LPCOMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */
+#define LPCOMP_INTENSET_READY_Msk (0x1UL << LPCOMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
+#define LPCOMP_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: LPCOMP_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 3 : Disable interrupt on CROSS event. */
+#define LPCOMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */
+#define LPCOMP_INTENCLR_CROSS_Msk (0x1UL << LPCOMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */
+#define LPCOMP_INTENCLR_CROSS_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENCLR_CROSS_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 2 : Disable interrupt on UP event. */
+#define LPCOMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */
+#define LPCOMP_INTENCLR_UP_Msk (0x1UL << LPCOMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */
+#define LPCOMP_INTENCLR_UP_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENCLR_UP_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENCLR_UP_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on DOWN event. */
+#define LPCOMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */
+#define LPCOMP_INTENCLR_DOWN_Msk (0x1UL << LPCOMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */
+#define LPCOMP_INTENCLR_DOWN_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENCLR_DOWN_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on READY event. */
+#define LPCOMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */
+#define LPCOMP_INTENCLR_READY_Msk (0x1UL << LPCOMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
+#define LPCOMP_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: LPCOMP_RESULT */
+/* Description: Result of last compare. */
+
+/* Bit 0 : Result of last compare. Decision point SAMPLE task. */
+#define LPCOMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */
+#define LPCOMP_RESULT_RESULT_Msk (0x1UL << LPCOMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */
+#define LPCOMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is bellow the reference threshold. */
+#define LPCOMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */
+
+/* Register: LPCOMP_ENABLE */
+/* Description: Enable the LPCOMP. */
+
+/* Bits 1..0 : Enable or disable LPCOMP. */
+#define LPCOMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define LPCOMP_ENABLE_ENABLE_Msk (0x3UL << LPCOMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define LPCOMP_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled LPCOMP. */
+#define LPCOMP_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable LPCOMP. */
+
+/* Register: LPCOMP_PSEL */
+/* Description: Input pin select. */
+
+/* Bits 2..0 : Analog input pin select. */
+#define LPCOMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */
+#define LPCOMP_PSEL_PSEL_Msk (0x7UL << LPCOMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */
+#define LPCOMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */
+
+/* Register: LPCOMP_REFSEL */
+/* Description: Reference select. */
+
+/* Bits 2..0 : Reference select. */
+#define LPCOMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */
+#define LPCOMP_REFSEL_REFSEL_Msk (0x7UL << LPCOMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */
+#define LPCOMP_REFSEL_REFSEL_SupplyOneEighthPrescaling (0UL) /*!< Use supply with a 1/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_SupplyTwoEighthsPrescaling (1UL) /*!< Use supply with a 2/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_SupplyThreeEighthsPrescaling (2UL) /*!< Use supply with a 3/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_SupplyFourEighthsPrescaling (3UL) /*!< Use supply with a 4/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_SupplyFiveEighthsPrescaling (4UL) /*!< Use supply with a 5/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_SupplySixEighthsPrescaling (5UL) /*!< Use supply with a 6/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_SupplySevenEighthsPrescaling (6UL) /*!< Use supply with a 7/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_ARef (7UL) /*!< Use external analog reference as reference. */
+
+/* Register: LPCOMP_EXTREFSEL */
+/* Description: External reference select. */
+
+/* Bit 0 : External analog reference pin selection. */
+#define LPCOMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */
+#define LPCOMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << LPCOMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */
+#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use analog reference 0 as reference. */
+#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use analog reference 1 as reference. */
+
+/* Register: LPCOMP_ANADETECT */
+/* Description: Analog detect configuration. */
+
+/* Bits 1..0 : Analog detect configuration. */
+#define LPCOMP_ANADETECT_ANADETECT_Pos (0UL) /*!< Position of ANADETECT field. */
+#define LPCOMP_ANADETECT_ANADETECT_Msk (0x3UL << LPCOMP_ANADETECT_ANADETECT_Pos) /*!< Bit mask of ANADETECT field. */
+#define LPCOMP_ANADETECT_ANADETECT_Cross (0UL) /*!< Generate ANADETEC on crossing, both upwards and downwards crossing. */
+#define LPCOMP_ANADETECT_ANADETECT_Up (1UL) /*!< Generate ANADETEC on upwards crossing only. */
+#define LPCOMP_ANADETECT_ANADETECT_Down (2UL) /*!< Generate ANADETEC on downwards crossing only. */
+
+/* Register: LPCOMP_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define LPCOMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define LPCOMP_POWER_POWER_Msk (0x1UL << LPCOMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define LPCOMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define LPCOMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: MPU */
+/* Description: Memory Protection Unit. */
+
+/* Register: MPU_PERR0 */
+/* Description: Configuration of peripherals in mpu regions. */
+
+/* Bit 31 : PPI region configuration. */
+#define MPU_PERR0_PPI_Pos (31UL) /*!< Position of PPI field. */
+#define MPU_PERR0_PPI_Msk (0x1UL << MPU_PERR0_PPI_Pos) /*!< Bit mask of PPI field. */
+#define MPU_PERR0_PPI_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_PPI_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 30 : NVMC region configuration. */
+#define MPU_PERR0_NVMC_Pos (30UL) /*!< Position of NVMC field. */
+#define MPU_PERR0_NVMC_Msk (0x1UL << MPU_PERR0_NVMC_Pos) /*!< Bit mask of NVMC field. */
+#define MPU_PERR0_NVMC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_NVMC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 19 : LPCOMP region configuration. */
+#define MPU_PERR0_LPCOMP_Pos (19UL) /*!< Position of LPCOMP field. */
+#define MPU_PERR0_LPCOMP_Msk (0x1UL << MPU_PERR0_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */
+#define MPU_PERR0_LPCOMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_LPCOMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 18 : QDEC region configuration. */
+#define MPU_PERR0_QDEC_Pos (18UL) /*!< Position of QDEC field. */
+#define MPU_PERR0_QDEC_Msk (0x1UL << MPU_PERR0_QDEC_Pos) /*!< Bit mask of QDEC field. */
+#define MPU_PERR0_QDEC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_QDEC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 17 : RTC1 region configuration. */
+#define MPU_PERR0_RTC1_Pos (17UL) /*!< Position of RTC1 field. */
+#define MPU_PERR0_RTC1_Msk (0x1UL << MPU_PERR0_RTC1_Pos) /*!< Bit mask of RTC1 field. */
+#define MPU_PERR0_RTC1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_RTC1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 16 : WDT region configuration. */
+#define MPU_PERR0_WDT_Pos (16UL) /*!< Position of WDT field. */
+#define MPU_PERR0_WDT_Msk (0x1UL << MPU_PERR0_WDT_Pos) /*!< Bit mask of WDT field. */
+#define MPU_PERR0_WDT_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_WDT_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 15 : CCM and AAR region configuration. */
+#define MPU_PERR0_CCM_AAR_Pos (15UL) /*!< Position of CCM_AAR field. */
+#define MPU_PERR0_CCM_AAR_Msk (0x1UL << MPU_PERR0_CCM_AAR_Pos) /*!< Bit mask of CCM_AAR field. */
+#define MPU_PERR0_CCM_AAR_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_CCM_AAR_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 14 : ECB region configuration. */
+#define MPU_PERR0_ECB_Pos (14UL) /*!< Position of ECB field. */
+#define MPU_PERR0_ECB_Msk (0x1UL << MPU_PERR0_ECB_Pos) /*!< Bit mask of ECB field. */
+#define MPU_PERR0_ECB_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_ECB_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 13 : RNG region configuration. */
+#define MPU_PERR0_RNG_Pos (13UL) /*!< Position of RNG field. */
+#define MPU_PERR0_RNG_Msk (0x1UL << MPU_PERR0_RNG_Pos) /*!< Bit mask of RNG field. */
+#define MPU_PERR0_RNG_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_RNG_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 12 : TEMP region configuration. */
+#define MPU_PERR0_TEMP_Pos (12UL) /*!< Position of TEMP field. */
+#define MPU_PERR0_TEMP_Msk (0x1UL << MPU_PERR0_TEMP_Pos) /*!< Bit mask of TEMP field. */
+#define MPU_PERR0_TEMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_TEMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 11 : RTC0 region configuration. */
+#define MPU_PERR0_RTC0_Pos (11UL) /*!< Position of RTC0 field. */
+#define MPU_PERR0_RTC0_Msk (0x1UL << MPU_PERR0_RTC0_Pos) /*!< Bit mask of RTC0 field. */
+#define MPU_PERR0_RTC0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_RTC0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 10 : TIMER2 region configuration. */
+#define MPU_PERR0_TIMER2_Pos (10UL) /*!< Position of TIMER2 field. */
+#define MPU_PERR0_TIMER2_Msk (0x1UL << MPU_PERR0_TIMER2_Pos) /*!< Bit mask of TIMER2 field. */
+#define MPU_PERR0_TIMER2_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_TIMER2_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 9 : TIMER1 region configuration. */
+#define MPU_PERR0_TIMER1_Pos (9UL) /*!< Position of TIMER1 field. */
+#define MPU_PERR0_TIMER1_Msk (0x1UL << MPU_PERR0_TIMER1_Pos) /*!< Bit mask of TIMER1 field. */
+#define MPU_PERR0_TIMER1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_TIMER1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 8 : TIMER0 region configuration. */
+#define MPU_PERR0_TIMER0_Pos (8UL) /*!< Position of TIMER0 field. */
+#define MPU_PERR0_TIMER0_Msk (0x1UL << MPU_PERR0_TIMER0_Pos) /*!< Bit mask of TIMER0 field. */
+#define MPU_PERR0_TIMER0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_TIMER0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 7 : ADC region configuration. */
+#define MPU_PERR0_ADC_Pos (7UL) /*!< Position of ADC field. */
+#define MPU_PERR0_ADC_Msk (0x1UL << MPU_PERR0_ADC_Pos) /*!< Bit mask of ADC field. */
+#define MPU_PERR0_ADC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_ADC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 6 : GPIOTE region configuration. */
+#define MPU_PERR0_GPIOTE_Pos (6UL) /*!< Position of GPIOTE field. */
+#define MPU_PERR0_GPIOTE_Msk (0x1UL << MPU_PERR0_GPIOTE_Pos) /*!< Bit mask of GPIOTE field. */
+#define MPU_PERR0_GPIOTE_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_GPIOTE_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 4 : SPI1 and TWI1 region configuration. */
+#define MPU_PERR0_SPI1_TWI1_Pos (4UL) /*!< Position of SPI1_TWI1 field. */
+#define MPU_PERR0_SPI1_TWI1_Msk (0x1UL << MPU_PERR0_SPI1_TWI1_Pos) /*!< Bit mask of SPI1_TWI1 field. */
+#define MPU_PERR0_SPI1_TWI1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_SPI1_TWI1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 3 : SPI0 and TWI0 region configuration. */
+#define MPU_PERR0_SPI0_TWI0_Pos (3UL) /*!< Position of SPI0_TWI0 field. */
+#define MPU_PERR0_SPI0_TWI0_Msk (0x1UL << MPU_PERR0_SPI0_TWI0_Pos) /*!< Bit mask of SPI0_TWI0 field. */
+#define MPU_PERR0_SPI0_TWI0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_SPI0_TWI0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 2 : UART0 region configuration. */
+#define MPU_PERR0_UART0_Pos (2UL) /*!< Position of UART0 field. */
+#define MPU_PERR0_UART0_Msk (0x1UL << MPU_PERR0_UART0_Pos) /*!< Bit mask of UART0 field. */
+#define MPU_PERR0_UART0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_UART0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 1 : RADIO region configuration. */
+#define MPU_PERR0_RADIO_Pos (1UL) /*!< Position of RADIO field. */
+#define MPU_PERR0_RADIO_Msk (0x1UL << MPU_PERR0_RADIO_Pos) /*!< Bit mask of RADIO field. */
+#define MPU_PERR0_RADIO_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_RADIO_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 0 : POWER_CLOCK region configuration. */
+#define MPU_PERR0_POWER_CLOCK_Pos (0UL) /*!< Position of POWER_CLOCK field. */
+#define MPU_PERR0_POWER_CLOCK_Msk (0x1UL << MPU_PERR0_POWER_CLOCK_Pos) /*!< Bit mask of POWER_CLOCK field. */
+#define MPU_PERR0_POWER_CLOCK_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_POWER_CLOCK_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Register: MPU_PROTENSET0 */
+/* Description: Erase and write protection bit enable set register. */
+
+/* Bit 31 : Protection enable for region 31. */
+#define MPU_PROTENSET0_PROTREG31_Pos (31UL) /*!< Position of PROTREG31 field. */
+#define MPU_PROTENSET0_PROTREG31_Msk (0x1UL << MPU_PROTENSET0_PROTREG31_Pos) /*!< Bit mask of PROTREG31 field. */
+#define MPU_PROTENSET0_PROTREG31_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG31_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG31_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 30 : Protection enable for region 30. */
+#define MPU_PROTENSET0_PROTREG30_Pos (30UL) /*!< Position of PROTREG30 field. */
+#define MPU_PROTENSET0_PROTREG30_Msk (0x1UL << MPU_PROTENSET0_PROTREG30_Pos) /*!< Bit mask of PROTREG30 field. */
+#define MPU_PROTENSET0_PROTREG30_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG30_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG30_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 29 : Protection enable for region 29. */
+#define MPU_PROTENSET0_PROTREG29_Pos (29UL) /*!< Position of PROTREG29 field. */
+#define MPU_PROTENSET0_PROTREG29_Msk (0x1UL << MPU_PROTENSET0_PROTREG29_Pos) /*!< Bit mask of PROTREG29 field. */
+#define MPU_PROTENSET0_PROTREG29_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG29_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG29_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 28 : Protection enable for region 28. */
+#define MPU_PROTENSET0_PROTREG28_Pos (28UL) /*!< Position of PROTREG28 field. */
+#define MPU_PROTENSET0_PROTREG28_Msk (0x1UL << MPU_PROTENSET0_PROTREG28_Pos) /*!< Bit mask of PROTREG28 field. */
+#define MPU_PROTENSET0_PROTREG28_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG28_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG28_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 27 : Protection enable for region 27. */
+#define MPU_PROTENSET0_PROTREG27_Pos (27UL) /*!< Position of PROTREG27 field. */
+#define MPU_PROTENSET0_PROTREG27_Msk (0x1UL << MPU_PROTENSET0_PROTREG27_Pos) /*!< Bit mask of PROTREG27 field. */
+#define MPU_PROTENSET0_PROTREG27_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG27_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG27_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 26 : Protection enable for region 26. */
+#define MPU_PROTENSET0_PROTREG26_Pos (26UL) /*!< Position of PROTREG26 field. */
+#define MPU_PROTENSET0_PROTREG26_Msk (0x1UL << MPU_PROTENSET0_PROTREG26_Pos) /*!< Bit mask of PROTREG26 field. */
+#define MPU_PROTENSET0_PROTREG26_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG26_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG26_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 25 : Protection enable for region 25. */
+#define MPU_PROTENSET0_PROTREG25_Pos (25UL) /*!< Position of PROTREG25 field. */
+#define MPU_PROTENSET0_PROTREG25_Msk (0x1UL << MPU_PROTENSET0_PROTREG25_Pos) /*!< Bit mask of PROTREG25 field. */
+#define MPU_PROTENSET0_PROTREG25_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG25_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG25_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 24 : Protection enable for region 24. */
+#define MPU_PROTENSET0_PROTREG24_Pos (24UL) /*!< Position of PROTREG24 field. */
+#define MPU_PROTENSET0_PROTREG24_Msk (0x1UL << MPU_PROTENSET0_PROTREG24_Pos) /*!< Bit mask of PROTREG24 field. */
+#define MPU_PROTENSET0_PROTREG24_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG24_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG24_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 23 : Protection enable for region 23. */
+#define MPU_PROTENSET0_PROTREG23_Pos (23UL) /*!< Position of PROTREG23 field. */
+#define MPU_PROTENSET0_PROTREG23_Msk (0x1UL << MPU_PROTENSET0_PROTREG23_Pos) /*!< Bit mask of PROTREG23 field. */
+#define MPU_PROTENSET0_PROTREG23_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG23_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG23_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 22 : Protection enable for region 22. */
+#define MPU_PROTENSET0_PROTREG22_Pos (22UL) /*!< Position of PROTREG22 field. */
+#define MPU_PROTENSET0_PROTREG22_Msk (0x1UL << MPU_PROTENSET0_PROTREG22_Pos) /*!< Bit mask of PROTREG22 field. */
+#define MPU_PROTENSET0_PROTREG22_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG22_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG22_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 21 : Protection enable for region 21. */
+#define MPU_PROTENSET0_PROTREG21_Pos (21UL) /*!< Position of PROTREG21 field. */
+#define MPU_PROTENSET0_PROTREG21_Msk (0x1UL << MPU_PROTENSET0_PROTREG21_Pos) /*!< Bit mask of PROTREG21 field. */
+#define MPU_PROTENSET0_PROTREG21_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG21_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG21_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 20 : Protection enable for region 20. */
+#define MPU_PROTENSET0_PROTREG20_Pos (20UL) /*!< Position of PROTREG20 field. */
+#define MPU_PROTENSET0_PROTREG20_Msk (0x1UL << MPU_PROTENSET0_PROTREG20_Pos) /*!< Bit mask of PROTREG20 field. */
+#define MPU_PROTENSET0_PROTREG20_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG20_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG20_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 19 : Protection enable for region 19. */
+#define MPU_PROTENSET0_PROTREG19_Pos (19UL) /*!< Position of PROTREG19 field. */
+#define MPU_PROTENSET0_PROTREG19_Msk (0x1UL << MPU_PROTENSET0_PROTREG19_Pos) /*!< Bit mask of PROTREG19 field. */
+#define MPU_PROTENSET0_PROTREG19_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG19_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG19_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 18 : Protection enable for region 18. */
+#define MPU_PROTENSET0_PROTREG18_Pos (18UL) /*!< Position of PROTREG18 field. */
+#define MPU_PROTENSET0_PROTREG18_Msk (0x1UL << MPU_PROTENSET0_PROTREG18_Pos) /*!< Bit mask of PROTREG18 field. */
+#define MPU_PROTENSET0_PROTREG18_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG18_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG18_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 17 : Protection enable for region 17. */
+#define MPU_PROTENSET0_PROTREG17_Pos (17UL) /*!< Position of PROTREG17 field. */
+#define MPU_PROTENSET0_PROTREG17_Msk (0x1UL << MPU_PROTENSET0_PROTREG17_Pos) /*!< Bit mask of PROTREG17 field. */
+#define MPU_PROTENSET0_PROTREG17_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG17_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG17_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 16 : Protection enable for region 16. */
+#define MPU_PROTENSET0_PROTREG16_Pos (16UL) /*!< Position of PROTREG16 field. */
+#define MPU_PROTENSET0_PROTREG16_Msk (0x1UL << MPU_PROTENSET0_PROTREG16_Pos) /*!< Bit mask of PROTREG16 field. */
+#define MPU_PROTENSET0_PROTREG16_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG16_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG16_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 15 : Protection enable for region 15. */
+#define MPU_PROTENSET0_PROTREG15_Pos (15UL) /*!< Position of PROTREG15 field. */
+#define MPU_PROTENSET0_PROTREG15_Msk (0x1UL << MPU_PROTENSET0_PROTREG15_Pos) /*!< Bit mask of PROTREG15 field. */
+#define MPU_PROTENSET0_PROTREG15_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG15_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG15_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 14 : Protection enable for region 14. */
+#define MPU_PROTENSET0_PROTREG14_Pos (14UL) /*!< Position of PROTREG14 field. */
+#define MPU_PROTENSET0_PROTREG14_Msk (0x1UL << MPU_PROTENSET0_PROTREG14_Pos) /*!< Bit mask of PROTREG14 field. */
+#define MPU_PROTENSET0_PROTREG14_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG14_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG14_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 13 : Protection enable for region 13. */
+#define MPU_PROTENSET0_PROTREG13_Pos (13UL) /*!< Position of PROTREG13 field. */
+#define MPU_PROTENSET0_PROTREG13_Msk (0x1UL << MPU_PROTENSET0_PROTREG13_Pos) /*!< Bit mask of PROTREG13 field. */
+#define MPU_PROTENSET0_PROTREG13_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG13_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG13_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 12 : Protection enable for region 12. */
+#define MPU_PROTENSET0_PROTREG12_Pos (12UL) /*!< Position of PROTREG12 field. */
+#define MPU_PROTENSET0_PROTREG12_Msk (0x1UL << MPU_PROTENSET0_PROTREG12_Pos) /*!< Bit mask of PROTREG12 field. */
+#define MPU_PROTENSET0_PROTREG12_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG12_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG12_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 11 : Protection enable for region 11. */
+#define MPU_PROTENSET0_PROTREG11_Pos (11UL) /*!< Position of PROTREG11 field. */
+#define MPU_PROTENSET0_PROTREG11_Msk (0x1UL << MPU_PROTENSET0_PROTREG11_Pos) /*!< Bit mask of PROTREG11 field. */
+#define MPU_PROTENSET0_PROTREG11_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG11_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG11_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 10 : Protection enable for region 10. */
+#define MPU_PROTENSET0_PROTREG10_Pos (10UL) /*!< Position of PROTREG10 field. */
+#define MPU_PROTENSET0_PROTREG10_Msk (0x1UL << MPU_PROTENSET0_PROTREG10_Pos) /*!< Bit mask of PROTREG10 field. */
+#define MPU_PROTENSET0_PROTREG10_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG10_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG10_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 9 : Protection enable for region 9. */
+#define MPU_PROTENSET0_PROTREG9_Pos (9UL) /*!< Position of PROTREG9 field. */
+#define MPU_PROTENSET0_PROTREG9_Msk (0x1UL << MPU_PROTENSET0_PROTREG9_Pos) /*!< Bit mask of PROTREG9 field. */
+#define MPU_PROTENSET0_PROTREG9_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG9_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG9_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 8 : Protection enable for region 8. */
+#define MPU_PROTENSET0_PROTREG8_Pos (8UL) /*!< Position of PROTREG8 field. */
+#define MPU_PROTENSET0_PROTREG8_Msk (0x1UL << MPU_PROTENSET0_PROTREG8_Pos) /*!< Bit mask of PROTREG8 field. */
+#define MPU_PROTENSET0_PROTREG8_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG8_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG8_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 7 : Protection enable for region 7. */
+#define MPU_PROTENSET0_PROTREG7_Pos (7UL) /*!< Position of PROTREG7 field. */
+#define MPU_PROTENSET0_PROTREG7_Msk (0x1UL << MPU_PROTENSET0_PROTREG7_Pos) /*!< Bit mask of PROTREG7 field. */
+#define MPU_PROTENSET0_PROTREG7_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG7_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG7_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 6 : Protection enable for region 6. */
+#define MPU_PROTENSET0_PROTREG6_Pos (6UL) /*!< Position of PROTREG6 field. */
+#define MPU_PROTENSET0_PROTREG6_Msk (0x1UL << MPU_PROTENSET0_PROTREG6_Pos) /*!< Bit mask of PROTREG6 field. */
+#define MPU_PROTENSET0_PROTREG6_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG6_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG6_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 5 : Protection enable for region 5. */
+#define MPU_PROTENSET0_PROTREG5_Pos (5UL) /*!< Position of PROTREG5 field. */
+#define MPU_PROTENSET0_PROTREG5_Msk (0x1UL << MPU_PROTENSET0_PROTREG5_Pos) /*!< Bit mask of PROTREG5 field. */
+#define MPU_PROTENSET0_PROTREG5_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG5_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG5_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 4 : Protection enable for region 4. */
+#define MPU_PROTENSET0_PROTREG4_Pos (4UL) /*!< Position of PROTREG4 field. */
+#define MPU_PROTENSET0_PROTREG4_Msk (0x1UL << MPU_PROTENSET0_PROTREG4_Pos) /*!< Bit mask of PROTREG4 field. */
+#define MPU_PROTENSET0_PROTREG4_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG4_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG4_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 3 : Protection enable for region 3. */
+#define MPU_PROTENSET0_PROTREG3_Pos (3UL) /*!< Position of PROTREG3 field. */
+#define MPU_PROTENSET0_PROTREG3_Msk (0x1UL << MPU_PROTENSET0_PROTREG3_Pos) /*!< Bit mask of PROTREG3 field. */
+#define MPU_PROTENSET0_PROTREG3_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG3_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG3_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 2 : Protection enable for region 2. */
+#define MPU_PROTENSET0_PROTREG2_Pos (2UL) /*!< Position of PROTREG2 field. */
+#define MPU_PROTENSET0_PROTREG2_Msk (0x1UL << MPU_PROTENSET0_PROTREG2_Pos) /*!< Bit mask of PROTREG2 field. */
+#define MPU_PROTENSET0_PROTREG2_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG2_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG2_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 1 : Protection enable for region 1. */
+#define MPU_PROTENSET0_PROTREG1_Pos (1UL) /*!< Position of PROTREG1 field. */
+#define MPU_PROTENSET0_PROTREG1_Msk (0x1UL << MPU_PROTENSET0_PROTREG1_Pos) /*!< Bit mask of PROTREG1 field. */
+#define MPU_PROTENSET0_PROTREG1_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG1_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG1_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 0 : Protection enable for region 0. */
+#define MPU_PROTENSET0_PROTREG0_Pos (0UL) /*!< Position of PROTREG0 field. */
+#define MPU_PROTENSET0_PROTREG0_Msk (0x1UL << MPU_PROTENSET0_PROTREG0_Pos) /*!< Bit mask of PROTREG0 field. */
+#define MPU_PROTENSET0_PROTREG0_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG0_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG0_Set (1UL) /*!< Enable protection on write. */
+
+/* Register: MPU_PROTENSET1 */
+/* Description: Erase and write protection bit enable set register. */
+
+/* Bit 31 : Protection enable for region 63. */
+#define MPU_PROTENSET1_PROTREG63_Pos (31UL) /*!< Position of PROTREG63 field. */
+#define MPU_PROTENSET1_PROTREG63_Msk (0x1UL << MPU_PROTENSET1_PROTREG63_Pos) /*!< Bit mask of PROTREG63 field. */
+#define MPU_PROTENSET1_PROTREG63_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG63_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG63_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 30 : Protection enable for region 62. */
+#define MPU_PROTENSET1_PROTREG62_Pos (30UL) /*!< Position of PROTREG62 field. */
+#define MPU_PROTENSET1_PROTREG62_Msk (0x1UL << MPU_PROTENSET1_PROTREG62_Pos) /*!< Bit mask of PROTREG62 field. */
+#define MPU_PROTENSET1_PROTREG62_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG62_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG62_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 29 : Protection enable for region 61. */
+#define MPU_PROTENSET1_PROTREG61_Pos (29UL) /*!< Position of PROTREG61 field. */
+#define MPU_PROTENSET1_PROTREG61_Msk (0x1UL << MPU_PROTENSET1_PROTREG61_Pos) /*!< Bit mask of PROTREG61 field. */
+#define MPU_PROTENSET1_PROTREG61_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG61_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG61_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 28 : Protection enable for region 60. */
+#define MPU_PROTENSET1_PROTREG60_Pos (28UL) /*!< Position of PROTREG60 field. */
+#define MPU_PROTENSET1_PROTREG60_Msk (0x1UL << MPU_PROTENSET1_PROTREG60_Pos) /*!< Bit mask of PROTREG60 field. */
+#define MPU_PROTENSET1_PROTREG60_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG60_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG60_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 27 : Protection enable for region 59. */
+#define MPU_PROTENSET1_PROTREG59_Pos (27UL) /*!< Position of PROTREG59 field. */
+#define MPU_PROTENSET1_PROTREG59_Msk (0x1UL << MPU_PROTENSET1_PROTREG59_Pos) /*!< Bit mask of PROTREG59 field. */
+#define MPU_PROTENSET1_PROTREG59_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG59_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG59_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 26 : Protection enable for region 58. */
+#define MPU_PROTENSET1_PROTREG58_Pos (26UL) /*!< Position of PROTREG58 field. */
+#define MPU_PROTENSET1_PROTREG58_Msk (0x1UL << MPU_PROTENSET1_PROTREG58_Pos) /*!< Bit mask of PROTREG58 field. */
+#define MPU_PROTENSET1_PROTREG58_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG58_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG58_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 25 : Protection enable for region 57. */
+#define MPU_PROTENSET1_PROTREG57_Pos (25UL) /*!< Position of PROTREG57 field. */
+#define MPU_PROTENSET1_PROTREG57_Msk (0x1UL << MPU_PROTENSET1_PROTREG57_Pos) /*!< Bit mask of PROTREG57 field. */
+#define MPU_PROTENSET1_PROTREG57_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG57_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG57_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 24 : Protection enable for region 56. */
+#define MPU_PROTENSET1_PROTREG56_Pos (24UL) /*!< Position of PROTREG56 field. */
+#define MPU_PROTENSET1_PROTREG56_Msk (0x1UL << MPU_PROTENSET1_PROTREG56_Pos) /*!< Bit mask of PROTREG56 field. */
+#define MPU_PROTENSET1_PROTREG56_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG56_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG56_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 23 : Protection enable for region 55. */
+#define MPU_PROTENSET1_PROTREG55_Pos (23UL) /*!< Position of PROTREG55 field. */
+#define MPU_PROTENSET1_PROTREG55_Msk (0x1UL << MPU_PROTENSET1_PROTREG55_Pos) /*!< Bit mask of PROTREG55 field. */
+#define MPU_PROTENSET1_PROTREG55_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG55_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG55_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 22 : Protection enable for region 54. */
+#define MPU_PROTENSET1_PROTREG54_Pos (22UL) /*!< Position of PROTREG54 field. */
+#define MPU_PROTENSET1_PROTREG54_Msk (0x1UL << MPU_PROTENSET1_PROTREG54_Pos) /*!< Bit mask of PROTREG54 field. */
+#define MPU_PROTENSET1_PROTREG54_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG54_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG54_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 21 : Protection enable for region 53. */
+#define MPU_PROTENSET1_PROTREG53_Pos (21UL) /*!< Position of PROTREG53 field. */
+#define MPU_PROTENSET1_PROTREG53_Msk (0x1UL << MPU_PROTENSET1_PROTREG53_Pos) /*!< Bit mask of PROTREG53 field. */
+#define MPU_PROTENSET1_PROTREG53_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG53_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG53_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 20 : Protection enable for region 52. */
+#define MPU_PROTENSET1_PROTREG52_Pos (20UL) /*!< Position of PROTREG52 field. */
+#define MPU_PROTENSET1_PROTREG52_Msk (0x1UL << MPU_PROTENSET1_PROTREG52_Pos) /*!< Bit mask of PROTREG52 field. */
+#define MPU_PROTENSET1_PROTREG52_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG52_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG52_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 19 : Protection enable for region 51. */
+#define MPU_PROTENSET1_PROTREG51_Pos (19UL) /*!< Position of PROTREG51 field. */
+#define MPU_PROTENSET1_PROTREG51_Msk (0x1UL << MPU_PROTENSET1_PROTREG51_Pos) /*!< Bit mask of PROTREG51 field. */
+#define MPU_PROTENSET1_PROTREG51_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG51_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG51_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 18 : Protection enable for region 50. */
+#define MPU_PROTENSET1_PROTREG50_Pos (18UL) /*!< Position of PROTREG50 field. */
+#define MPU_PROTENSET1_PROTREG50_Msk (0x1UL << MPU_PROTENSET1_PROTREG50_Pos) /*!< Bit mask of PROTREG50 field. */
+#define MPU_PROTENSET1_PROTREG50_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG50_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG50_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 17 : Protection enable for region 49. */
+#define MPU_PROTENSET1_PROTREG49_Pos (17UL) /*!< Position of PROTREG49 field. */
+#define MPU_PROTENSET1_PROTREG49_Msk (0x1UL << MPU_PROTENSET1_PROTREG49_Pos) /*!< Bit mask of PROTREG49 field. */
+#define MPU_PROTENSET1_PROTREG49_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG49_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG49_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 16 : Protection enable for region 48. */
+#define MPU_PROTENSET1_PROTREG48_Pos (16UL) /*!< Position of PROTREG48 field. */
+#define MPU_PROTENSET1_PROTREG48_Msk (0x1UL << MPU_PROTENSET1_PROTREG48_Pos) /*!< Bit mask of PROTREG48 field. */
+#define MPU_PROTENSET1_PROTREG48_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG48_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG48_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 15 : Protection enable for region 47. */
+#define MPU_PROTENSET1_PROTREG47_Pos (15UL) /*!< Position of PROTREG47 field. */
+#define MPU_PROTENSET1_PROTREG47_Msk (0x1UL << MPU_PROTENSET1_PROTREG47_Pos) /*!< Bit mask of PROTREG47 field. */
+#define MPU_PROTENSET1_PROTREG47_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG47_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG47_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 14 : Protection enable for region 46. */
+#define MPU_PROTENSET1_PROTREG46_Pos (14UL) /*!< Position of PROTREG46 field. */
+#define MPU_PROTENSET1_PROTREG46_Msk (0x1UL << MPU_PROTENSET1_PROTREG46_Pos) /*!< Bit mask of PROTREG46 field. */
+#define MPU_PROTENSET1_PROTREG46_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG46_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG46_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 13 : Protection enable for region 45. */
+#define MPU_PROTENSET1_PROTREG45_Pos (13UL) /*!< Position of PROTREG45 field. */
+#define MPU_PROTENSET1_PROTREG45_Msk (0x1UL << MPU_PROTENSET1_PROTREG45_Pos) /*!< Bit mask of PROTREG45 field. */
+#define MPU_PROTENSET1_PROTREG45_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG45_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG45_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 12 : Protection enable for region 44. */
+#define MPU_PROTENSET1_PROTREG44_Pos (12UL) /*!< Position of PROTREG44 field. */
+#define MPU_PROTENSET1_PROTREG44_Msk (0x1UL << MPU_PROTENSET1_PROTREG44_Pos) /*!< Bit mask of PROTREG44 field. */
+#define MPU_PROTENSET1_PROTREG44_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG44_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG44_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 11 : Protection enable for region 43. */
+#define MPU_PROTENSET1_PROTREG43_Pos (11UL) /*!< Position of PROTREG43 field. */
+#define MPU_PROTENSET1_PROTREG43_Msk (0x1UL << MPU_PROTENSET1_PROTREG43_Pos) /*!< Bit mask of PROTREG43 field. */
+#define MPU_PROTENSET1_PROTREG43_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG43_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG43_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 10 : Protection enable for region 42. */
+#define MPU_PROTENSET1_PROTREG42_Pos (10UL) /*!< Position of PROTREG42 field. */
+#define MPU_PROTENSET1_PROTREG42_Msk (0x1UL << MPU_PROTENSET1_PROTREG42_Pos) /*!< Bit mask of PROTREG42 field. */
+#define MPU_PROTENSET1_PROTREG42_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG42_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG42_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 9 : Protection enable for region 41. */
+#define MPU_PROTENSET1_PROTREG41_Pos (9UL) /*!< Position of PROTREG41 field. */
+#define MPU_PROTENSET1_PROTREG41_Msk (0x1UL << MPU_PROTENSET1_PROTREG41_Pos) /*!< Bit mask of PROTREG41 field. */
+#define MPU_PROTENSET1_PROTREG41_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG41_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG41_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 8 : Protection enable for region 40. */
+#define MPU_PROTENSET1_PROTREG40_Pos (8UL) /*!< Position of PROTREG40 field. */
+#define MPU_PROTENSET1_PROTREG40_Msk (0x1UL << MPU_PROTENSET1_PROTREG40_Pos) /*!< Bit mask of PROTREG40 field. */
+#define MPU_PROTENSET1_PROTREG40_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG40_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG40_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 7 : Protection enable for region 39. */
+#define MPU_PROTENSET1_PROTREG39_Pos (7UL) /*!< Position of PROTREG39 field. */
+#define MPU_PROTENSET1_PROTREG39_Msk (0x1UL << MPU_PROTENSET1_PROTREG39_Pos) /*!< Bit mask of PROTREG39 field. */
+#define MPU_PROTENSET1_PROTREG39_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG39_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG39_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 6 : Protection enable for region 38. */
+#define MPU_PROTENSET1_PROTREG38_Pos (6UL) /*!< Position of PROTREG38 field. */
+#define MPU_PROTENSET1_PROTREG38_Msk (0x1UL << MPU_PROTENSET1_PROTREG38_Pos) /*!< Bit mask of PROTREG38 field. */
+#define MPU_PROTENSET1_PROTREG38_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG38_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG38_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 5 : Protection enable for region 37. */
+#define MPU_PROTENSET1_PROTREG37_Pos (5UL) /*!< Position of PROTREG37 field. */
+#define MPU_PROTENSET1_PROTREG37_Msk (0x1UL << MPU_PROTENSET1_PROTREG37_Pos) /*!< Bit mask of PROTREG37 field. */
+#define MPU_PROTENSET1_PROTREG37_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG37_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG37_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 4 : Protection enable for region 36. */
+#define MPU_PROTENSET1_PROTREG36_Pos (4UL) /*!< Position of PROTREG36 field. */
+#define MPU_PROTENSET1_PROTREG36_Msk (0x1UL << MPU_PROTENSET1_PROTREG36_Pos) /*!< Bit mask of PROTREG36 field. */
+#define MPU_PROTENSET1_PROTREG36_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG36_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG36_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 3 : Protection enable for region 35. */
+#define MPU_PROTENSET1_PROTREG35_Pos (3UL) /*!< Position of PROTREG35 field. */
+#define MPU_PROTENSET1_PROTREG35_Msk (0x1UL << MPU_PROTENSET1_PROTREG35_Pos) /*!< Bit mask of PROTREG35 field. */
+#define MPU_PROTENSET1_PROTREG35_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG35_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG35_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 2 : Protection enable for region 34. */
+#define MPU_PROTENSET1_PROTREG34_Pos (2UL) /*!< Position of PROTREG34 field. */
+#define MPU_PROTENSET1_PROTREG34_Msk (0x1UL << MPU_PROTENSET1_PROTREG34_Pos) /*!< Bit mask of PROTREG34 field. */
+#define MPU_PROTENSET1_PROTREG34_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG34_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG34_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 1 : Protection enable for region 33. */
+#define MPU_PROTENSET1_PROTREG33_Pos (1UL) /*!< Position of PROTREG33 field. */
+#define MPU_PROTENSET1_PROTREG33_Msk (0x1UL << MPU_PROTENSET1_PROTREG33_Pos) /*!< Bit mask of PROTREG33 field. */
+#define MPU_PROTENSET1_PROTREG33_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG33_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG33_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 0 : Protection enable for region 32. */
+#define MPU_PROTENSET1_PROTREG32_Pos (0UL) /*!< Position of PROTREG32 field. */
+#define MPU_PROTENSET1_PROTREG32_Msk (0x1UL << MPU_PROTENSET1_PROTREG32_Pos) /*!< Bit mask of PROTREG32 field. */
+#define MPU_PROTENSET1_PROTREG32_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG32_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG32_Set (1UL) /*!< Enable protection on write. */
+
+/* Register: MPU_DISABLEINDEBUG */
+/* Description: Disable erase and write protection mechanism in debug mode. */
+
+/* Bit 0 : Disable protection mechanism in debug mode. */
+#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos (0UL) /*!< Position of DISABLEINDEBUG field. */
+#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Msk (0x1UL << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos) /*!< Bit mask of DISABLEINDEBUG field. */
+#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Enabled (0UL) /*!< Protection enabled. */
+#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled (1UL) /*!< Protection disabled. */
+
+/* Register: MPU_PROTBLOCKSIZE */
+/* Description: Erase and write protection block size. */
+
+/* Bits 1..0 : Erase and write protection block size. */
+#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos (0UL) /*!< Position of PROTBLOCKSIZE field. */
+#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Msk (0x3UL << MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos) /*!< Bit mask of PROTBLOCKSIZE field. */
+#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_4k (0UL) /*!< Erase and write protection block size is 4k. */
+
+
+/* Peripheral: NVMC */
+/* Description: Non Volatile Memory Controller. */
+
+/* Register: NVMC_READY */
+/* Description: Ready flag. */
+
+/* Bit 0 : NVMC ready. */
+#define NVMC_READY_READY_Pos (0UL) /*!< Position of READY field. */
+#define NVMC_READY_READY_Msk (0x1UL << NVMC_READY_READY_Pos) /*!< Bit mask of READY field. */
+#define NVMC_READY_READY_Busy (0UL) /*!< NVMC is busy (on-going write or erase operation). */
+#define NVMC_READY_READY_Ready (1UL) /*!< NVMC is ready. */
+
+/* Register: NVMC_CONFIG */
+/* Description: Configuration register. */
+
+/* Bits 1..0 : Program write enable. */
+#define NVMC_CONFIG_WEN_Pos (0UL) /*!< Position of WEN field. */
+#define NVMC_CONFIG_WEN_Msk (0x3UL << NVMC_CONFIG_WEN_Pos) /*!< Bit mask of WEN field. */
+#define NVMC_CONFIG_WEN_Ren (0x00UL) /*!< Read only access. */
+#define NVMC_CONFIG_WEN_Wen (0x01UL) /*!< Write enabled. */
+#define NVMC_CONFIG_WEN_Een (0x02UL) /*!< Erase enabled. */
+
+/* Register: NVMC_ERASEALL */
+/* Description: Register for erasing all non-volatile user memory. */
+
+/* Bit 0 : Starts the erasing of all user NVM (code region 0/1 and UICR registers). */
+#define NVMC_ERASEALL_ERASEALL_Pos (0UL) /*!< Position of ERASEALL field. */
+#define NVMC_ERASEALL_ERASEALL_Msk (0x1UL << NVMC_ERASEALL_ERASEALL_Pos) /*!< Bit mask of ERASEALL field. */
+#define NVMC_ERASEALL_ERASEALL_NoOperation (0UL) /*!< No operation. */
+#define NVMC_ERASEALL_ERASEALL_Erase (1UL) /*!< Start chip erase. */
+
+/* Register: NVMC_ERASEUICR */
+/* Description: Register for start erasing User Information Congfiguration Registers. */
+
+/* Bit 0 : It can only be used when all contents of code region 1 are erased. */
+#define NVMC_ERASEUICR_ERASEUICR_Pos (0UL) /*!< Position of ERASEUICR field. */
+#define NVMC_ERASEUICR_ERASEUICR_Msk (0x1UL << NVMC_ERASEUICR_ERASEUICR_Pos) /*!< Bit mask of ERASEUICR field. */
+#define NVMC_ERASEUICR_ERASEUICR_NoOperation (0UL) /*!< No operation. */
+#define NVMC_ERASEUICR_ERASEUICR_Erase (1UL) /*!< Start UICR erase. */
+
+
+/* Peripheral: POWER */
+/* Description: Power Control. */
+
+/* Register: POWER_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 2 : Enable interrupt on POFWARN event. */
+#define POWER_INTENSET_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */
+#define POWER_INTENSET_POFWARN_Msk (0x1UL << POWER_INTENSET_POFWARN_Pos) /*!< Bit mask of POFWARN field. */
+#define POWER_INTENSET_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */
+#define POWER_INTENSET_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */
+#define POWER_INTENSET_POFWARN_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: POWER_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 2 : Disable interrupt on POFWARN event. */
+#define POWER_INTENCLR_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */
+#define POWER_INTENCLR_POFWARN_Msk (0x1UL << POWER_INTENCLR_POFWARN_Pos) /*!< Bit mask of POFWARN field. */
+#define POWER_INTENCLR_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */
+#define POWER_INTENCLR_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */
+#define POWER_INTENCLR_POFWARN_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: POWER_RESETREAS */
+/* Description: Reset reason. */
+
+/* Bit 18 : Reset from wake-up from OFF mode detected by entering into debug interface mode. */
+#define POWER_RESETREAS_DIF_Pos (18UL) /*!< Position of DIF field. */
+#define POWER_RESETREAS_DIF_Msk (0x1UL << POWER_RESETREAS_DIF_Pos) /*!< Bit mask of DIF field. */
+#define POWER_RESETREAS_DIF_NotDetected (0UL) /*!< Reset not detected. */
+#define POWER_RESETREAS_DIF_Detected (1UL) /*!< Reset detected. */
+
+/* Bit 17 : Reset from wake-up from OFF mode detected by the use of ANADETECT signal from LPCOMP. */
+#define POWER_RESETREAS_LPCOMP_Pos (17UL) /*!< Position of LPCOMP field. */
+#define POWER_RESETREAS_LPCOMP_Msk (0x1UL << POWER_RESETREAS_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */
+#define POWER_RESETREAS_LPCOMP_NotDetected (0UL) /*!< Reset not detected. */
+#define POWER_RESETREAS_LPCOMP_Detected (1UL) /*!< Reset detected. */
+
+/* Bit 16 : Reset from wake-up from OFF mode detected by the use of DETECT signal from GPIO. */
+#define POWER_RESETREAS_OFF_Pos (16UL) /*!< Position of OFF field. */
+#define POWER_RESETREAS_OFF_Msk (0x1UL << POWER_RESETREAS_OFF_Pos) /*!< Bit mask of OFF field. */
+#define POWER_RESETREAS_OFF_NotDetected (0UL) /*!< Reset not detected. */
+#define POWER_RESETREAS_OFF_Detected (1UL) /*!< Reset detected. */
+
+/* Bit 3 : Reset from CPU lock-up detected. */
+#define POWER_RESETREAS_LOCKUP_Pos (3UL) /*!< Position of LOCKUP field. */
+#define POWER_RESETREAS_LOCKUP_Msk (0x1UL << POWER_RESETREAS_LOCKUP_Pos) /*!< Bit mask of LOCKUP field. */
+#define POWER_RESETREAS_LOCKUP_NotDetected (0UL) /*!< Reset not detected. */
+#define POWER_RESETREAS_LOCKUP_Detected (1UL) /*!< Reset detected. */
+
+/* Bit 2 : Reset from AIRCR.SYSRESETREQ detected. */
+#define POWER_RESETREAS_SREQ_Pos (2UL) /*!< Position of SREQ field. */
+#define POWER_RESETREAS_SREQ_Msk (0x1UL << POWER_RESETREAS_SREQ_Pos) /*!< Bit mask of SREQ field. */
+#define POWER_RESETREAS_SREQ_NotDetected (0UL) /*!< Reset not detected. */
+#define POWER_RESETREAS_SREQ_Detected (1UL) /*!< Reset detected. */
+
+/* Bit 1 : Reset from watchdog detected. */
+#define POWER_RESETREAS_DOG_Pos (1UL) /*!< Position of DOG field. */
+#define POWER_RESETREAS_DOG_Msk (0x1UL << POWER_RESETREAS_DOG_Pos) /*!< Bit mask of DOG field. */
+#define POWER_RESETREAS_DOG_NotDetected (0UL) /*!< Reset not detected. */
+#define POWER_RESETREAS_DOG_Detected (1UL) /*!< Reset detected. */
+
+/* Bit 0 : Reset from pin-reset detected. */
+#define POWER_RESETREAS_RESETPIN_Pos (0UL) /*!< Position of RESETPIN field. */
+#define POWER_RESETREAS_RESETPIN_Msk (0x1UL << POWER_RESETREAS_RESETPIN_Pos) /*!< Bit mask of RESETPIN field. */
+#define POWER_RESETREAS_RESETPIN_NotDetected (0UL) /*!< Reset not detected. */
+#define POWER_RESETREAS_RESETPIN_Detected (1UL) /*!< Reset detected. */
+
+/* Register: POWER_RAMSTATUS */
+/* Description: Ram status register. */
+
+/* Bit 3 : RAM block 3 status. */
+#define POWER_RAMSTATUS_RAMBLOCK3_Pos (3UL) /*!< Position of RAMBLOCK3 field. */
+#define POWER_RAMSTATUS_RAMBLOCK3_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK3_Pos) /*!< Bit mask of RAMBLOCK3 field. */
+#define POWER_RAMSTATUS_RAMBLOCK3_Off (0UL) /*!< RAM block 3 is off or powering up. */
+#define POWER_RAMSTATUS_RAMBLOCK3_On (1UL) /*!< RAM block 3 is on. */
+
+/* Bit 2 : RAM block 2 status. */
+#define POWER_RAMSTATUS_RAMBLOCK2_Pos (2UL) /*!< Position of RAMBLOCK2 field. */
+#define POWER_RAMSTATUS_RAMBLOCK2_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK2_Pos) /*!< Bit mask of RAMBLOCK2 field. */
+#define POWER_RAMSTATUS_RAMBLOCK2_Off (0UL) /*!< RAM block 2 is off or powering up. */
+#define POWER_RAMSTATUS_RAMBLOCK2_On (1UL) /*!< RAM block 2 is on. */
+
+/* Bit 1 : RAM block 1 status. */
+#define POWER_RAMSTATUS_RAMBLOCK1_Pos (1UL) /*!< Position of RAMBLOCK1 field. */
+#define POWER_RAMSTATUS_RAMBLOCK1_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK1_Pos) /*!< Bit mask of RAMBLOCK1 field. */
+#define POWER_RAMSTATUS_RAMBLOCK1_Off (0UL) /*!< RAM block 1 is off or powering up. */
+#define POWER_RAMSTATUS_RAMBLOCK1_On (1UL) /*!< RAM block 1 is on. */
+
+/* Bit 0 : RAM block 0 status. */
+#define POWER_RAMSTATUS_RAMBLOCK0_Pos (0UL) /*!< Position of RAMBLOCK0 field. */
+#define POWER_RAMSTATUS_RAMBLOCK0_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK0_Pos) /*!< Bit mask of RAMBLOCK0 field. */
+#define POWER_RAMSTATUS_RAMBLOCK0_Off (0UL) /*!< RAM block 0 is off or powering up. */
+#define POWER_RAMSTATUS_RAMBLOCK0_On (1UL) /*!< RAM block 0 is on. */
+
+/* Register: POWER_SYSTEMOFF */
+/* Description: System off register. */
+
+/* Bit 0 : Enter system off mode. */
+#define POWER_SYSTEMOFF_SYSTEMOFF_Pos (0UL) /*!< Position of SYSTEMOFF field. */
+#define POWER_SYSTEMOFF_SYSTEMOFF_Msk (0x1UL << POWER_SYSTEMOFF_SYSTEMOFF_Pos) /*!< Bit mask of SYSTEMOFF field. */
+#define POWER_SYSTEMOFF_SYSTEMOFF_Enter (1UL) /*!< Enter system off mode. */
+
+/* Register: POWER_POFCON */
+/* Description: Power failure configuration. */
+
+/* Bits 2..1 : Set threshold level. */
+#define POWER_POFCON_THRESHOLD_Pos (1UL) /*!< Position of THRESHOLD field. */
+#define POWER_POFCON_THRESHOLD_Msk (0x3UL << POWER_POFCON_THRESHOLD_Pos) /*!< Bit mask of THRESHOLD field. */
+#define POWER_POFCON_THRESHOLD_V21 (0x00UL) /*!< Set threshold to 2.1Volts. */
+#define POWER_POFCON_THRESHOLD_V23 (0x01UL) /*!< Set threshold to 2.3Volts. */
+#define POWER_POFCON_THRESHOLD_V25 (0x02UL) /*!< Set threshold to 2.5Volts. */
+#define POWER_POFCON_THRESHOLD_V27 (0x03UL) /*!< Set threshold to 2.7Volts. */
+
+/* Bit 0 : Power failure comparator enable. */
+#define POWER_POFCON_POF_Pos (0UL) /*!< Position of POF field. */
+#define POWER_POFCON_POF_Msk (0x1UL << POWER_POFCON_POF_Pos) /*!< Bit mask of POF field. */
+#define POWER_POFCON_POF_Disabled (0UL) /*!< Disabled. */
+#define POWER_POFCON_POF_Enabled (1UL) /*!< Enabled. */
+
+/* Register: POWER_GPREGRET */
+/* Description: General purpose retention register. This register is a retained register. */
+
+/* Bits 7..0 : General purpose retention register. */
+#define POWER_GPREGRET_GPREGRET_Pos (0UL) /*!< Position of GPREGRET field. */
+#define POWER_GPREGRET_GPREGRET_Msk (0xFFUL << POWER_GPREGRET_GPREGRET_Pos) /*!< Bit mask of GPREGRET field. */
+
+/* Register: POWER_RAMON */
+/* Description: Ram on/off. */
+
+/* Bit 17 : RAM block 1 behaviour in OFF mode. */
+#define POWER_RAMON_OFFRAM1_Pos (17UL) /*!< Position of OFFRAM1 field. */
+#define POWER_RAMON_OFFRAM1_Msk (0x1UL << POWER_RAMON_OFFRAM1_Pos) /*!< Bit mask of OFFRAM1 field. */
+#define POWER_RAMON_OFFRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in OFF mode. */
+#define POWER_RAMON_OFFRAM1_RAM1On (1UL) /*!< RAM block 1 ON in OFF mode. */
+
+/* Bit 16 : RAM block 0 behaviour in OFF mode. */
+#define POWER_RAMON_OFFRAM0_Pos (16UL) /*!< Position of OFFRAM0 field. */
+#define POWER_RAMON_OFFRAM0_Msk (0x1UL << POWER_RAMON_OFFRAM0_Pos) /*!< Bit mask of OFFRAM0 field. */
+#define POWER_RAMON_OFFRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in OFF mode. */
+#define POWER_RAMON_OFFRAM0_RAM0On (1UL) /*!< RAM block 0 ON in OFF mode. */
+
+/* Bit 1 : RAM block 1 behaviour in ON mode. */
+#define POWER_RAMON_ONRAM1_Pos (1UL) /*!< Position of ONRAM1 field. */
+#define POWER_RAMON_ONRAM1_Msk (0x1UL << POWER_RAMON_ONRAM1_Pos) /*!< Bit mask of ONRAM1 field. */
+#define POWER_RAMON_ONRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in ON mode. */
+#define POWER_RAMON_ONRAM1_RAM1On (1UL) /*!< RAM block 1 ON in ON mode. */
+
+/* Bit 0 : RAM block 0 behaviour in ON mode. */
+#define POWER_RAMON_ONRAM0_Pos (0UL) /*!< Position of ONRAM0 field. */
+#define POWER_RAMON_ONRAM0_Msk (0x1UL << POWER_RAMON_ONRAM0_Pos) /*!< Bit mask of ONRAM0 field. */
+#define POWER_RAMON_ONRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in ON mode. */
+#define POWER_RAMON_ONRAM0_RAM0On (1UL) /*!< RAM block 0 ON in ON mode. */
+
+/* Register: POWER_RESET */
+/* Description: Pin reset functionality configuration register. This register is a retained register. */
+
+/* Bit 0 : Enable or disable pin reset in debug interface mode. */
+#define POWER_RESET_RESET_Pos (0UL) /*!< Position of RESET field. */
+#define POWER_RESET_RESET_Msk (0x1UL << POWER_RESET_RESET_Pos) /*!< Bit mask of RESET field. */
+#define POWER_RESET_RESET_Disabled (0UL) /*!< Pin reset in debug interface mode disabled. */
+#define POWER_RESET_RESET_Enabled (1UL) /*!< Pin reset in debug interface mode enabled. */
+
+/* Register: POWER_RAMONB */
+/* Description: Ram on/off. */
+
+/* Bit 17 : RAM block 3 behaviour in OFF mode. */
+#define POWER_RAMONB_OFFRAM3_Pos (17UL) /*!< Position of OFFRAM3 field. */
+#define POWER_RAMONB_OFFRAM3_Msk (0x1UL << POWER_RAMONB_OFFRAM3_Pos) /*!< Bit mask of OFFRAM3 field. */
+#define POWER_RAMONB_OFFRAM3_RAM3Off (0UL) /*!< RAM block 3 OFF in OFF mode. */
+#define POWER_RAMONB_OFFRAM3_RAM3On (1UL) /*!< RAM block 3 ON in OFF mode. */
+
+/* Bit 16 : RAM block 2 behaviour in OFF mode. */
+#define POWER_RAMONB_OFFRAM2_Pos (16UL) /*!< Position of OFFRAM2 field. */
+#define POWER_RAMONB_OFFRAM2_Msk (0x1UL << POWER_RAMONB_OFFRAM2_Pos) /*!< Bit mask of OFFRAM2 field. */
+#define POWER_RAMONB_OFFRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in OFF mode. */
+#define POWER_RAMONB_OFFRAM2_RAM2On (1UL) /*!< RAM block 2 ON in OFF mode. */
+
+/* Bit 1 : RAM block 3 behaviour in ON mode. */
+#define POWER_RAMONB_ONRAM3_Pos (1UL) /*!< Position of ONRAM3 field. */
+#define POWER_RAMONB_ONRAM3_Msk (0x1UL << POWER_RAMONB_ONRAM3_Pos) /*!< Bit mask of ONRAM3 field. */
+#define POWER_RAMONB_ONRAM3_RAM3Off (0UL) /*!< RAM block 33 OFF in ON mode. */
+#define POWER_RAMONB_ONRAM3_RAM3On (1UL) /*!< RAM block 3 ON in ON mode. */
+
+/* Bit 0 : RAM block 2 behaviour in ON mode. */
+#define POWER_RAMONB_ONRAM2_Pos (0UL) /*!< Position of ONRAM2 field. */
+#define POWER_RAMONB_ONRAM2_Msk (0x1UL << POWER_RAMONB_ONRAM2_Pos) /*!< Bit mask of ONRAM2 field. */
+#define POWER_RAMONB_ONRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in ON mode. */
+#define POWER_RAMONB_ONRAM2_RAM2On (1UL) /*!< RAM block 2 ON in ON mode. */
+
+/* Register: POWER_DCDCEN */
+/* Description: DCDC converter enable configuration register. */
+
+/* Bit 0 : Enable DCDC converter. */
+#define POWER_DCDCEN_DCDCEN_Pos (0UL) /*!< Position of DCDCEN field. */
+#define POWER_DCDCEN_DCDCEN_Msk (0x1UL << POWER_DCDCEN_DCDCEN_Pos) /*!< Bit mask of DCDCEN field. */
+#define POWER_DCDCEN_DCDCEN_Disabled (0UL) /*!< DCDC converter disabled. */
+#define POWER_DCDCEN_DCDCEN_Enabled (1UL) /*!< DCDC converter enabled. */
+
+/* Register: POWER_DCDCFORCE */
+/* Description: DCDC power-up force register. */
+
+/* Bit 1 : DCDC power-up force on. */
+#define POWER_DCDCFORCE_FORCEON_Pos (1UL) /*!< Position of FORCEON field. */
+#define POWER_DCDCFORCE_FORCEON_Msk (0x1UL << POWER_DCDCFORCE_FORCEON_Pos) /*!< Bit mask of FORCEON field. */
+#define POWER_DCDCFORCE_FORCEON_NoForce (0UL) /*!< No force. */
+#define POWER_DCDCFORCE_FORCEON_Force (1UL) /*!< Force. */
+
+/* Bit 0 : DCDC power-up force off. */
+#define POWER_DCDCFORCE_FORCEOFF_Pos (0UL) /*!< Position of FORCEOFF field. */
+#define POWER_DCDCFORCE_FORCEOFF_Msk (0x1UL << POWER_DCDCFORCE_FORCEOFF_Pos) /*!< Bit mask of FORCEOFF field. */
+#define POWER_DCDCFORCE_FORCEOFF_NoForce (0UL) /*!< No force. */
+#define POWER_DCDCFORCE_FORCEOFF_Force (1UL) /*!< Force. */
+
+
+/* Peripheral: PPI */
+/* Description: PPI controller. */
+
+/* Register: PPI_CHEN */
+/* Description: Channel enable. */
+
+/* Bit 31 : Enable PPI channel 31. */
+#define PPI_CHEN_CH31_Pos (31UL) /*!< Position of CH31 field. */
+#define PPI_CHEN_CH31_Msk (0x1UL << PPI_CHEN_CH31_Pos) /*!< Bit mask of CH31 field. */
+#define PPI_CHEN_CH31_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH31_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 30 : Enable PPI channel 30. */
+#define PPI_CHEN_CH30_Pos (30UL) /*!< Position of CH30 field. */
+#define PPI_CHEN_CH30_Msk (0x1UL << PPI_CHEN_CH30_Pos) /*!< Bit mask of CH30 field. */
+#define PPI_CHEN_CH30_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH30_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 29 : Enable PPI channel 29. */
+#define PPI_CHEN_CH29_Pos (29UL) /*!< Position of CH29 field. */
+#define PPI_CHEN_CH29_Msk (0x1UL << PPI_CHEN_CH29_Pos) /*!< Bit mask of CH29 field. */
+#define PPI_CHEN_CH29_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH29_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 28 : Enable PPI channel 28. */
+#define PPI_CHEN_CH28_Pos (28UL) /*!< Position of CH28 field. */
+#define PPI_CHEN_CH28_Msk (0x1UL << PPI_CHEN_CH28_Pos) /*!< Bit mask of CH28 field. */
+#define PPI_CHEN_CH28_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH28_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 27 : Enable PPI channel 27. */
+#define PPI_CHEN_CH27_Pos (27UL) /*!< Position of CH27 field. */
+#define PPI_CHEN_CH27_Msk (0x1UL << PPI_CHEN_CH27_Pos) /*!< Bit mask of CH27 field. */
+#define PPI_CHEN_CH27_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH27_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 26 : Enable PPI channel 26. */
+#define PPI_CHEN_CH26_Pos (26UL) /*!< Position of CH26 field. */
+#define PPI_CHEN_CH26_Msk (0x1UL << PPI_CHEN_CH26_Pos) /*!< Bit mask of CH26 field. */
+#define PPI_CHEN_CH26_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH26_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 25 : Enable PPI channel 25. */
+#define PPI_CHEN_CH25_Pos (25UL) /*!< Position of CH25 field. */
+#define PPI_CHEN_CH25_Msk (0x1UL << PPI_CHEN_CH25_Pos) /*!< Bit mask of CH25 field. */
+#define PPI_CHEN_CH25_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH25_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 24 : Enable PPI channel 24. */
+#define PPI_CHEN_CH24_Pos (24UL) /*!< Position of CH24 field. */
+#define PPI_CHEN_CH24_Msk (0x1UL << PPI_CHEN_CH24_Pos) /*!< Bit mask of CH24 field. */
+#define PPI_CHEN_CH24_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH24_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 23 : Enable PPI channel 23. */
+#define PPI_CHEN_CH23_Pos (23UL) /*!< Position of CH23 field. */
+#define PPI_CHEN_CH23_Msk (0x1UL << PPI_CHEN_CH23_Pos) /*!< Bit mask of CH23 field. */
+#define PPI_CHEN_CH23_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH23_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 22 : Enable PPI channel 22. */
+#define PPI_CHEN_CH22_Pos (22UL) /*!< Position of CH22 field. */
+#define PPI_CHEN_CH22_Msk (0x1UL << PPI_CHEN_CH22_Pos) /*!< Bit mask of CH22 field. */
+#define PPI_CHEN_CH22_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH22_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 21 : Enable PPI channel 21. */
+#define PPI_CHEN_CH21_Pos (21UL) /*!< Position of CH21 field. */
+#define PPI_CHEN_CH21_Msk (0x1UL << PPI_CHEN_CH21_Pos) /*!< Bit mask of CH21 field. */
+#define PPI_CHEN_CH21_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH21_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 20 : Enable PPI channel 20. */
+#define PPI_CHEN_CH20_Pos (20UL) /*!< Position of CH20 field. */
+#define PPI_CHEN_CH20_Msk (0x1UL << PPI_CHEN_CH20_Pos) /*!< Bit mask of CH20 field. */
+#define PPI_CHEN_CH20_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH20_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 15 : Enable PPI channel 15. */
+#define PPI_CHEN_CH15_Pos (15UL) /*!< Position of CH15 field. */
+#define PPI_CHEN_CH15_Msk (0x1UL << PPI_CHEN_CH15_Pos) /*!< Bit mask of CH15 field. */
+#define PPI_CHEN_CH15_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH15_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 14 : Enable PPI channel 14. */
+#define PPI_CHEN_CH14_Pos (14UL) /*!< Position of CH14 field. */
+#define PPI_CHEN_CH14_Msk (0x1UL << PPI_CHEN_CH14_Pos) /*!< Bit mask of CH14 field. */
+#define PPI_CHEN_CH14_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH14_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 13 : Enable PPI channel 13. */
+#define PPI_CHEN_CH13_Pos (13UL) /*!< Position of CH13 field. */
+#define PPI_CHEN_CH13_Msk (0x1UL << PPI_CHEN_CH13_Pos) /*!< Bit mask of CH13 field. */
+#define PPI_CHEN_CH13_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH13_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 12 : Enable PPI channel 12. */
+#define PPI_CHEN_CH12_Pos (12UL) /*!< Position of CH12 field. */
+#define PPI_CHEN_CH12_Msk (0x1UL << PPI_CHEN_CH12_Pos) /*!< Bit mask of CH12 field. */
+#define PPI_CHEN_CH12_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH12_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 11 : Enable PPI channel 11. */
+#define PPI_CHEN_CH11_Pos (11UL) /*!< Position of CH11 field. */
+#define PPI_CHEN_CH11_Msk (0x1UL << PPI_CHEN_CH11_Pos) /*!< Bit mask of CH11 field. */
+#define PPI_CHEN_CH11_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH11_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 10 : Enable PPI channel 10. */
+#define PPI_CHEN_CH10_Pos (10UL) /*!< Position of CH10 field. */
+#define PPI_CHEN_CH10_Msk (0x1UL << PPI_CHEN_CH10_Pos) /*!< Bit mask of CH10 field. */
+#define PPI_CHEN_CH10_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH10_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 9 : Enable PPI channel 9. */
+#define PPI_CHEN_CH9_Pos (9UL) /*!< Position of CH9 field. */
+#define PPI_CHEN_CH9_Msk (0x1UL << PPI_CHEN_CH9_Pos) /*!< Bit mask of CH9 field. */
+#define PPI_CHEN_CH9_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH9_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 8 : Enable PPI channel 8. */
+#define PPI_CHEN_CH8_Pos (8UL) /*!< Position of CH8 field. */
+#define PPI_CHEN_CH8_Msk (0x1UL << PPI_CHEN_CH8_Pos) /*!< Bit mask of CH8 field. */
+#define PPI_CHEN_CH8_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH8_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 7 : Enable PPI channel 7. */
+#define PPI_CHEN_CH7_Pos (7UL) /*!< Position of CH7 field. */
+#define PPI_CHEN_CH7_Msk (0x1UL << PPI_CHEN_CH7_Pos) /*!< Bit mask of CH7 field. */
+#define PPI_CHEN_CH7_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH7_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 6 : Enable PPI channel 6. */
+#define PPI_CHEN_CH6_Pos (6UL) /*!< Position of CH6 field. */
+#define PPI_CHEN_CH6_Msk (0x1UL << PPI_CHEN_CH6_Pos) /*!< Bit mask of CH6 field. */
+#define PPI_CHEN_CH6_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH6_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 5 : Enable PPI channel 5. */
+#define PPI_CHEN_CH5_Pos (5UL) /*!< Position of CH5 field. */
+#define PPI_CHEN_CH5_Msk (0x1UL << PPI_CHEN_CH5_Pos) /*!< Bit mask of CH5 field. */
+#define PPI_CHEN_CH5_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH5_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 4 : Enable PPI channel 4. */
+#define PPI_CHEN_CH4_Pos (4UL) /*!< Position of CH4 field. */
+#define PPI_CHEN_CH4_Msk (0x1UL << PPI_CHEN_CH4_Pos) /*!< Bit mask of CH4 field. */
+#define PPI_CHEN_CH4_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH4_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 3 : Enable PPI channel 3. */
+#define PPI_CHEN_CH3_Pos (3UL) /*!< Position of CH3 field. */
+#define PPI_CHEN_CH3_Msk (0x1UL << PPI_CHEN_CH3_Pos) /*!< Bit mask of CH3 field. */
+#define PPI_CHEN_CH3_Disabled (0UL) /*!< Channel disabled */
+#define PPI_CHEN_CH3_Enabled (1UL) /*!< Channel enabled */
+
+/* Bit 2 : Enable PPI channel 2. */
+#define PPI_CHEN_CH2_Pos (2UL) /*!< Position of CH2 field. */
+#define PPI_CHEN_CH2_Msk (0x1UL << PPI_CHEN_CH2_Pos) /*!< Bit mask of CH2 field. */
+#define PPI_CHEN_CH2_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH2_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 1 : Enable PPI channel 1. */
+#define PPI_CHEN_CH1_Pos (1UL) /*!< Position of CH1 field. */
+#define PPI_CHEN_CH1_Msk (0x1UL << PPI_CHEN_CH1_Pos) /*!< Bit mask of CH1 field. */
+#define PPI_CHEN_CH1_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH1_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 0 : Enable PPI channel 0. */
+#define PPI_CHEN_CH0_Pos (0UL) /*!< Position of CH0 field. */
+#define PPI_CHEN_CH0_Msk (0x1UL << PPI_CHEN_CH0_Pos) /*!< Bit mask of CH0 field. */
+#define PPI_CHEN_CH0_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH0_Enabled (1UL) /*!< Channel enabled. */
+
+/* Register: PPI_CHENSET */
+/* Description: Channel enable set. */
+
+/* Bit 31 : Enable PPI channel 31. */
+#define PPI_CHENSET_CH31_Pos (31UL) /*!< Position of CH31 field. */
+#define PPI_CHENSET_CH31_Msk (0x1UL << PPI_CHENSET_CH31_Pos) /*!< Bit mask of CH31 field. */
+#define PPI_CHENSET_CH31_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH31_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH31_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 30 : Enable PPI channel 30. */
+#define PPI_CHENSET_CH30_Pos (30UL) /*!< Position of CH30 field. */
+#define PPI_CHENSET_CH30_Msk (0x1UL << PPI_CHENSET_CH30_Pos) /*!< Bit mask of CH30 field. */
+#define PPI_CHENSET_CH30_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH30_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH30_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 29 : Enable PPI channel 29. */
+#define PPI_CHENSET_CH29_Pos (29UL) /*!< Position of CH29 field. */
+#define PPI_CHENSET_CH29_Msk (0x1UL << PPI_CHENSET_CH29_Pos) /*!< Bit mask of CH29 field. */
+#define PPI_CHENSET_CH29_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH29_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH29_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 28 : Enable PPI channel 28. */
+#define PPI_CHENSET_CH28_Pos (28UL) /*!< Position of CH28 field. */
+#define PPI_CHENSET_CH28_Msk (0x1UL << PPI_CHENSET_CH28_Pos) /*!< Bit mask of CH28 field. */
+#define PPI_CHENSET_CH28_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH28_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH28_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 27 : Enable PPI channel 27. */
+#define PPI_CHENSET_CH27_Pos (27UL) /*!< Position of CH27 field. */
+#define PPI_CHENSET_CH27_Msk (0x1UL << PPI_CHENSET_CH27_Pos) /*!< Bit mask of CH27 field. */
+#define PPI_CHENSET_CH27_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH27_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH27_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 26 : Enable PPI channel 26. */
+#define PPI_CHENSET_CH26_Pos (26UL) /*!< Position of CH26 field. */
+#define PPI_CHENSET_CH26_Msk (0x1UL << PPI_CHENSET_CH26_Pos) /*!< Bit mask of CH26 field. */
+#define PPI_CHENSET_CH26_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH26_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH26_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 25 : Enable PPI channel 25. */
+#define PPI_CHENSET_CH25_Pos (25UL) /*!< Position of CH25 field. */
+#define PPI_CHENSET_CH25_Msk (0x1UL << PPI_CHENSET_CH25_Pos) /*!< Bit mask of CH25 field. */
+#define PPI_CHENSET_CH25_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH25_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH25_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 24 : Enable PPI channel 24. */
+#define PPI_CHENSET_CH24_Pos (24UL) /*!< Position of CH24 field. */
+#define PPI_CHENSET_CH24_Msk (0x1UL << PPI_CHENSET_CH24_Pos) /*!< Bit mask of CH24 field. */
+#define PPI_CHENSET_CH24_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH24_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH24_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 23 : Enable PPI channel 23. */
+#define PPI_CHENSET_CH23_Pos (23UL) /*!< Position of CH23 field. */
+#define PPI_CHENSET_CH23_Msk (0x1UL << PPI_CHENSET_CH23_Pos) /*!< Bit mask of CH23 field. */
+#define PPI_CHENSET_CH23_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH23_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH23_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 22 : Enable PPI channel 22. */
+#define PPI_CHENSET_CH22_Pos (22UL) /*!< Position of CH22 field. */
+#define PPI_CHENSET_CH22_Msk (0x1UL << PPI_CHENSET_CH22_Pos) /*!< Bit mask of CH22 field. */
+#define PPI_CHENSET_CH22_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH22_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH22_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 21 : Enable PPI channel 21. */
+#define PPI_CHENSET_CH21_Pos (21UL) /*!< Position of CH21 field. */
+#define PPI_CHENSET_CH21_Msk (0x1UL << PPI_CHENSET_CH21_Pos) /*!< Bit mask of CH21 field. */
+#define PPI_CHENSET_CH21_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH21_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH21_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 20 : Enable PPI channel 20. */
+#define PPI_CHENSET_CH20_Pos (20UL) /*!< Position of CH20 field. */
+#define PPI_CHENSET_CH20_Msk (0x1UL << PPI_CHENSET_CH20_Pos) /*!< Bit mask of CH20 field. */
+#define PPI_CHENSET_CH20_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH20_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH20_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 15 : Enable PPI channel 15. */
+#define PPI_CHENSET_CH15_Pos (15UL) /*!< Position of CH15 field. */
+#define PPI_CHENSET_CH15_Msk (0x1UL << PPI_CHENSET_CH15_Pos) /*!< Bit mask of CH15 field. */
+#define PPI_CHENSET_CH15_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH15_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH15_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 14 : Enable PPI channel 14. */
+#define PPI_CHENSET_CH14_Pos (14UL) /*!< Position of CH14 field. */
+#define PPI_CHENSET_CH14_Msk (0x1UL << PPI_CHENSET_CH14_Pos) /*!< Bit mask of CH14 field. */
+#define PPI_CHENSET_CH14_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH14_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH14_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 13 : Enable PPI channel 13. */
+#define PPI_CHENSET_CH13_Pos (13UL) /*!< Position of CH13 field. */
+#define PPI_CHENSET_CH13_Msk (0x1UL << PPI_CHENSET_CH13_Pos) /*!< Bit mask of CH13 field. */
+#define PPI_CHENSET_CH13_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH13_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH13_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 12 : Enable PPI channel 12. */
+#define PPI_CHENSET_CH12_Pos (12UL) /*!< Position of CH12 field. */
+#define PPI_CHENSET_CH12_Msk (0x1UL << PPI_CHENSET_CH12_Pos) /*!< Bit mask of CH12 field. */
+#define PPI_CHENSET_CH12_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH12_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH12_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 11 : Enable PPI channel 11. */
+#define PPI_CHENSET_CH11_Pos (11UL) /*!< Position of CH11 field. */
+#define PPI_CHENSET_CH11_Msk (0x1UL << PPI_CHENSET_CH11_Pos) /*!< Bit mask of CH11 field. */
+#define PPI_CHENSET_CH11_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH11_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH11_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 10 : Enable PPI channel 10. */
+#define PPI_CHENSET_CH10_Pos (10UL) /*!< Position of CH10 field. */
+#define PPI_CHENSET_CH10_Msk (0x1UL << PPI_CHENSET_CH10_Pos) /*!< Bit mask of CH10 field. */
+#define PPI_CHENSET_CH10_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH10_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH10_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 9 : Enable PPI channel 9. */
+#define PPI_CHENSET_CH9_Pos (9UL) /*!< Position of CH9 field. */
+#define PPI_CHENSET_CH9_Msk (0x1UL << PPI_CHENSET_CH9_Pos) /*!< Bit mask of CH9 field. */
+#define PPI_CHENSET_CH9_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH9_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH9_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 8 : Enable PPI channel 8. */
+#define PPI_CHENSET_CH8_Pos (8UL) /*!< Position of CH8 field. */
+#define PPI_CHENSET_CH8_Msk (0x1UL << PPI_CHENSET_CH8_Pos) /*!< Bit mask of CH8 field. */
+#define PPI_CHENSET_CH8_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH8_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH8_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 7 : Enable PPI channel 7. */
+#define PPI_CHENSET_CH7_Pos (7UL) /*!< Position of CH7 field. */
+#define PPI_CHENSET_CH7_Msk (0x1UL << PPI_CHENSET_CH7_Pos) /*!< Bit mask of CH7 field. */
+#define PPI_CHENSET_CH7_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH7_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH7_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 6 : Enable PPI channel 6. */
+#define PPI_CHENSET_CH6_Pos (6UL) /*!< Position of CH6 field. */
+#define PPI_CHENSET_CH6_Msk (0x1UL << PPI_CHENSET_CH6_Pos) /*!< Bit mask of CH6 field. */
+#define PPI_CHENSET_CH6_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH6_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH6_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 5 : Enable PPI channel 5. */
+#define PPI_CHENSET_CH5_Pos (5UL) /*!< Position of CH5 field. */
+#define PPI_CHENSET_CH5_Msk (0x1UL << PPI_CHENSET_CH5_Pos) /*!< Bit mask of CH5 field. */
+#define PPI_CHENSET_CH5_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH5_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH5_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 4 : Enable PPI channel 4. */
+#define PPI_CHENSET_CH4_Pos (4UL) /*!< Position of CH4 field. */
+#define PPI_CHENSET_CH4_Msk (0x1UL << PPI_CHENSET_CH4_Pos) /*!< Bit mask of CH4 field. */
+#define PPI_CHENSET_CH4_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH4_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH4_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 3 : Enable PPI channel 3. */
+#define PPI_CHENSET_CH3_Pos (3UL) /*!< Position of CH3 field. */
+#define PPI_CHENSET_CH3_Msk (0x1UL << PPI_CHENSET_CH3_Pos) /*!< Bit mask of CH3 field. */
+#define PPI_CHENSET_CH3_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH3_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH3_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 2 : Enable PPI channel 2. */
+#define PPI_CHENSET_CH2_Pos (2UL) /*!< Position of CH2 field. */
+#define PPI_CHENSET_CH2_Msk (0x1UL << PPI_CHENSET_CH2_Pos) /*!< Bit mask of CH2 field. */
+#define PPI_CHENSET_CH2_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH2_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH2_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 1 : Enable PPI channel 1. */
+#define PPI_CHENSET_CH1_Pos (1UL) /*!< Position of CH1 field. */
+#define PPI_CHENSET_CH1_Msk (0x1UL << PPI_CHENSET_CH1_Pos) /*!< Bit mask of CH1 field. */
+#define PPI_CHENSET_CH1_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH1_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH1_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 0 : Enable PPI channel 0. */
+#define PPI_CHENSET_CH0_Pos (0UL) /*!< Position of CH0 field. */
+#define PPI_CHENSET_CH0_Msk (0x1UL << PPI_CHENSET_CH0_Pos) /*!< Bit mask of CH0 field. */
+#define PPI_CHENSET_CH0_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH0_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH0_Set (1UL) /*!< Enable channel on write. */
+
+/* Register: PPI_CHENCLR */
+/* Description: Channel enable clear. */
+
+/* Bit 31 : Disable PPI channel 31. */
+#define PPI_CHENCLR_CH31_Pos (31UL) /*!< Position of CH31 field. */
+#define PPI_CHENCLR_CH31_Msk (0x1UL << PPI_CHENCLR_CH31_Pos) /*!< Bit mask of CH31 field. */
+#define PPI_CHENCLR_CH31_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH31_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH31_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 30 : Disable PPI channel 30. */
+#define PPI_CHENCLR_CH30_Pos (30UL) /*!< Position of CH30 field. */
+#define PPI_CHENCLR_CH30_Msk (0x1UL << PPI_CHENCLR_CH30_Pos) /*!< Bit mask of CH30 field. */
+#define PPI_CHENCLR_CH30_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH30_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH30_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 29 : Disable PPI channel 29. */
+#define PPI_CHENCLR_CH29_Pos (29UL) /*!< Position of CH29 field. */
+#define PPI_CHENCLR_CH29_Msk (0x1UL << PPI_CHENCLR_CH29_Pos) /*!< Bit mask of CH29 field. */
+#define PPI_CHENCLR_CH29_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH29_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH29_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 28 : Disable PPI channel 28. */
+#define PPI_CHENCLR_CH28_Pos (28UL) /*!< Position of CH28 field. */
+#define PPI_CHENCLR_CH28_Msk (0x1UL << PPI_CHENCLR_CH28_Pos) /*!< Bit mask of CH28 field. */
+#define PPI_CHENCLR_CH28_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH28_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH28_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 27 : Disable PPI channel 27. */
+#define PPI_CHENCLR_CH27_Pos (27UL) /*!< Position of CH27 field. */
+#define PPI_CHENCLR_CH27_Msk (0x1UL << PPI_CHENCLR_CH27_Pos) /*!< Bit mask of CH27 field. */
+#define PPI_CHENCLR_CH27_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH27_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH27_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 26 : Disable PPI channel 26. */
+#define PPI_CHENCLR_CH26_Pos (26UL) /*!< Position of CH26 field. */
+#define PPI_CHENCLR_CH26_Msk (0x1UL << PPI_CHENCLR_CH26_Pos) /*!< Bit mask of CH26 field. */
+#define PPI_CHENCLR_CH26_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH26_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH26_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 25 : Disable PPI channel 25. */
+#define PPI_CHENCLR_CH25_Pos (25UL) /*!< Position of CH25 field. */
+#define PPI_CHENCLR_CH25_Msk (0x1UL << PPI_CHENCLR_CH25_Pos) /*!< Bit mask of CH25 field. */
+#define PPI_CHENCLR_CH25_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH25_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH25_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 24 : Disable PPI channel 24. */
+#define PPI_CHENCLR_CH24_Pos (24UL) /*!< Position of CH24 field. */
+#define PPI_CHENCLR_CH24_Msk (0x1UL << PPI_CHENCLR_CH24_Pos) /*!< Bit mask of CH24 field. */
+#define PPI_CHENCLR_CH24_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH24_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH24_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 23 : Disable PPI channel 23. */
+#define PPI_CHENCLR_CH23_Pos (23UL) /*!< Position of CH23 field. */
+#define PPI_CHENCLR_CH23_Msk (0x1UL << PPI_CHENCLR_CH23_Pos) /*!< Bit mask of CH23 field. */
+#define PPI_CHENCLR_CH23_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH23_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH23_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 22 : Disable PPI channel 22. */
+#define PPI_CHENCLR_CH22_Pos (22UL) /*!< Position of CH22 field. */
+#define PPI_CHENCLR_CH22_Msk (0x1UL << PPI_CHENCLR_CH22_Pos) /*!< Bit mask of CH22 field. */
+#define PPI_CHENCLR_CH22_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH22_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH22_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 21 : Disable PPI channel 21. */
+#define PPI_CHENCLR_CH21_Pos (21UL) /*!< Position of CH21 field. */
+#define PPI_CHENCLR_CH21_Msk (0x1UL << PPI_CHENCLR_CH21_Pos) /*!< Bit mask of CH21 field. */
+#define PPI_CHENCLR_CH21_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH21_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH21_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 20 : Disable PPI channel 20. */
+#define PPI_CHENCLR_CH20_Pos (20UL) /*!< Position of CH20 field. */
+#define PPI_CHENCLR_CH20_Msk (0x1UL << PPI_CHENCLR_CH20_Pos) /*!< Bit mask of CH20 field. */
+#define PPI_CHENCLR_CH20_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH20_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH20_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 15 : Disable PPI channel 15. */
+#define PPI_CHENCLR_CH15_Pos (15UL) /*!< Position of CH15 field. */
+#define PPI_CHENCLR_CH15_Msk (0x1UL << PPI_CHENCLR_CH15_Pos) /*!< Bit mask of CH15 field. */
+#define PPI_CHENCLR_CH15_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH15_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH15_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 14 : Disable PPI channel 14. */
+#define PPI_CHENCLR_CH14_Pos (14UL) /*!< Position of CH14 field. */
+#define PPI_CHENCLR_CH14_Msk (0x1UL << PPI_CHENCLR_CH14_Pos) /*!< Bit mask of CH14 field. */
+#define PPI_CHENCLR_CH14_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH14_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH14_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 13 : Disable PPI channel 13. */
+#define PPI_CHENCLR_CH13_Pos (13UL) /*!< Position of CH13 field. */
+#define PPI_CHENCLR_CH13_Msk (0x1UL << PPI_CHENCLR_CH13_Pos) /*!< Bit mask of CH13 field. */
+#define PPI_CHENCLR_CH13_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH13_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH13_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 12 : Disable PPI channel 12. */
+#define PPI_CHENCLR_CH12_Pos (12UL) /*!< Position of CH12 field. */
+#define PPI_CHENCLR_CH12_Msk (0x1UL << PPI_CHENCLR_CH12_Pos) /*!< Bit mask of CH12 field. */
+#define PPI_CHENCLR_CH12_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH12_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH12_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 11 : Disable PPI channel 11. */
+#define PPI_CHENCLR_CH11_Pos (11UL) /*!< Position of CH11 field. */
+#define PPI_CHENCLR_CH11_Msk (0x1UL << PPI_CHENCLR_CH11_Pos) /*!< Bit mask of CH11 field. */
+#define PPI_CHENCLR_CH11_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH11_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH11_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 10 : Disable PPI channel 10. */
+#define PPI_CHENCLR_CH10_Pos (10UL) /*!< Position of CH10 field. */
+#define PPI_CHENCLR_CH10_Msk (0x1UL << PPI_CHENCLR_CH10_Pos) /*!< Bit mask of CH10 field. */
+#define PPI_CHENCLR_CH10_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH10_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH10_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 9 : Disable PPI channel 9. */
+#define PPI_CHENCLR_CH9_Pos (9UL) /*!< Position of CH9 field. */
+#define PPI_CHENCLR_CH9_Msk (0x1UL << PPI_CHENCLR_CH9_Pos) /*!< Bit mask of CH9 field. */
+#define PPI_CHENCLR_CH9_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH9_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH9_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 8 : Disable PPI channel 8. */
+#define PPI_CHENCLR_CH8_Pos (8UL) /*!< Position of CH8 field. */
+#define PPI_CHENCLR_CH8_Msk (0x1UL << PPI_CHENCLR_CH8_Pos) /*!< Bit mask of CH8 field. */
+#define PPI_CHENCLR_CH8_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH8_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH8_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 7 : Disable PPI channel 7. */
+#define PPI_CHENCLR_CH7_Pos (7UL) /*!< Position of CH7 field. */
+#define PPI_CHENCLR_CH7_Msk (0x1UL << PPI_CHENCLR_CH7_Pos) /*!< Bit mask of CH7 field. */
+#define PPI_CHENCLR_CH7_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH7_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH7_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 6 : Disable PPI channel 6. */
+#define PPI_CHENCLR_CH6_Pos (6UL) /*!< Position of CH6 field. */
+#define PPI_CHENCLR_CH6_Msk (0x1UL << PPI_CHENCLR_CH6_Pos) /*!< Bit mask of CH6 field. */
+#define PPI_CHENCLR_CH6_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH6_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH6_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 5 : Disable PPI channel 5. */
+#define PPI_CHENCLR_CH5_Pos (5UL) /*!< Position of CH5 field. */
+#define PPI_CHENCLR_CH5_Msk (0x1UL << PPI_CHENCLR_CH5_Pos) /*!< Bit mask of CH5 field. */
+#define PPI_CHENCLR_CH5_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH5_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH5_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 4 : Disable PPI channel 4. */
+#define PPI_CHENCLR_CH4_Pos (4UL) /*!< Position of CH4 field. */
+#define PPI_CHENCLR_CH4_Msk (0x1UL << PPI_CHENCLR_CH4_Pos) /*!< Bit mask of CH4 field. */
+#define PPI_CHENCLR_CH4_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH4_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH4_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 3 : Disable PPI channel 3. */
+#define PPI_CHENCLR_CH3_Pos (3UL) /*!< Position of CH3 field. */
+#define PPI_CHENCLR_CH3_Msk (0x1UL << PPI_CHENCLR_CH3_Pos) /*!< Bit mask of CH3 field. */
+#define PPI_CHENCLR_CH3_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH3_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH3_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 2 : Disable PPI channel 2. */
+#define PPI_CHENCLR_CH2_Pos (2UL) /*!< Position of CH2 field. */
+#define PPI_CHENCLR_CH2_Msk (0x1UL << PPI_CHENCLR_CH2_Pos) /*!< Bit mask of CH2 field. */
+#define PPI_CHENCLR_CH2_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH2_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH2_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 1 : Disable PPI channel 1. */
+#define PPI_CHENCLR_CH1_Pos (1UL) /*!< Position of CH1 field. */
+#define PPI_CHENCLR_CH1_Msk (0x1UL << PPI_CHENCLR_CH1_Pos) /*!< Bit mask of CH1 field. */
+#define PPI_CHENCLR_CH1_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH1_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH1_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 0 : Disable PPI channel 0. */
+#define PPI_CHENCLR_CH0_Pos (0UL) /*!< Position of CH0 field. */
+#define PPI_CHENCLR_CH0_Msk (0x1UL << PPI_CHENCLR_CH0_Pos) /*!< Bit mask of CH0 field. */
+#define PPI_CHENCLR_CH0_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH0_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH0_Clear (1UL) /*!< Disable channel on write. */
+
+/* Register: PPI_CHG */
+/* Description: Channel group configuration. */
+
+/* Bit 31 : Include CH31 in channel group. */
+#define PPI_CHG_CH31_Pos (31UL) /*!< Position of CH31 field. */
+#define PPI_CHG_CH31_Msk (0x1UL << PPI_CHG_CH31_Pos) /*!< Bit mask of CH31 field. */
+#define PPI_CHG_CH31_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH31_Included (1UL) /*!< Channel included. */
+
+/* Bit 30 : Include CH30 in channel group. */
+#define PPI_CHG_CH30_Pos (30UL) /*!< Position of CH30 field. */
+#define PPI_CHG_CH30_Msk (0x1UL << PPI_CHG_CH30_Pos) /*!< Bit mask of CH30 field. */
+#define PPI_CHG_CH30_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH30_Included (1UL) /*!< Channel included. */
+
+/* Bit 29 : Include CH29 in channel group. */
+#define PPI_CHG_CH29_Pos (29UL) /*!< Position of CH29 field. */
+#define PPI_CHG_CH29_Msk (0x1UL << PPI_CHG_CH29_Pos) /*!< Bit mask of CH29 field. */
+#define PPI_CHG_CH29_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH29_Included (1UL) /*!< Channel included. */
+
+/* Bit 28 : Include CH28 in channel group. */
+#define PPI_CHG_CH28_Pos (28UL) /*!< Position of CH28 field. */
+#define PPI_CHG_CH28_Msk (0x1UL << PPI_CHG_CH28_Pos) /*!< Bit mask of CH28 field. */
+#define PPI_CHG_CH28_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH28_Included (1UL) /*!< Channel included. */
+
+/* Bit 27 : Include CH27 in channel group. */
+#define PPI_CHG_CH27_Pos (27UL) /*!< Position of CH27 field. */
+#define PPI_CHG_CH27_Msk (0x1UL << PPI_CHG_CH27_Pos) /*!< Bit mask of CH27 field. */
+#define PPI_CHG_CH27_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH27_Included (1UL) /*!< Channel included. */
+
+/* Bit 26 : Include CH26 in channel group. */
+#define PPI_CHG_CH26_Pos (26UL) /*!< Position of CH26 field. */
+#define PPI_CHG_CH26_Msk (0x1UL << PPI_CHG_CH26_Pos) /*!< Bit mask of CH26 field. */
+#define PPI_CHG_CH26_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH26_Included (1UL) /*!< Channel included. */
+
+/* Bit 25 : Include CH25 in channel group. */
+#define PPI_CHG_CH25_Pos (25UL) /*!< Position of CH25 field. */
+#define PPI_CHG_CH25_Msk (0x1UL << PPI_CHG_CH25_Pos) /*!< Bit mask of CH25 field. */
+#define PPI_CHG_CH25_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH25_Included (1UL) /*!< Channel included. */
+
+/* Bit 24 : Include CH24 in channel group. */
+#define PPI_CHG_CH24_Pos (24UL) /*!< Position of CH24 field. */
+#define PPI_CHG_CH24_Msk (0x1UL << PPI_CHG_CH24_Pos) /*!< Bit mask of CH24 field. */
+#define PPI_CHG_CH24_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH24_Included (1UL) /*!< Channel included. */
+
+/* Bit 23 : Include CH23 in channel group. */
+#define PPI_CHG_CH23_Pos (23UL) /*!< Position of CH23 field. */
+#define PPI_CHG_CH23_Msk (0x1UL << PPI_CHG_CH23_Pos) /*!< Bit mask of CH23 field. */
+#define PPI_CHG_CH23_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH23_Included (1UL) /*!< Channel included. */
+
+/* Bit 22 : Include CH22 in channel group. */
+#define PPI_CHG_CH22_Pos (22UL) /*!< Position of CH22 field. */
+#define PPI_CHG_CH22_Msk (0x1UL << PPI_CHG_CH22_Pos) /*!< Bit mask of CH22 field. */
+#define PPI_CHG_CH22_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH22_Included (1UL) /*!< Channel included. */
+
+/* Bit 21 : Include CH21 in channel group. */
+#define PPI_CHG_CH21_Pos (21UL) /*!< Position of CH21 field. */
+#define PPI_CHG_CH21_Msk (0x1UL << PPI_CHG_CH21_Pos) /*!< Bit mask of CH21 field. */
+#define PPI_CHG_CH21_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH21_Included (1UL) /*!< Channel included. */
+
+/* Bit 20 : Include CH20 in channel group. */
+#define PPI_CHG_CH20_Pos (20UL) /*!< Position of CH20 field. */
+#define PPI_CHG_CH20_Msk (0x1UL << PPI_CHG_CH20_Pos) /*!< Bit mask of CH20 field. */
+#define PPI_CHG_CH20_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH20_Included (1UL) /*!< Channel included. */
+
+/* Bit 15 : Include CH15 in channel group. */
+#define PPI_CHG_CH15_Pos (15UL) /*!< Position of CH15 field. */
+#define PPI_CHG_CH15_Msk (0x1UL << PPI_CHG_CH15_Pos) /*!< Bit mask of CH15 field. */
+#define PPI_CHG_CH15_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH15_Included (1UL) /*!< Channel included. */
+
+/* Bit 14 : Include CH14 in channel group. */
+#define PPI_CHG_CH14_Pos (14UL) /*!< Position of CH14 field. */
+#define PPI_CHG_CH14_Msk (0x1UL << PPI_CHG_CH14_Pos) /*!< Bit mask of CH14 field. */
+#define PPI_CHG_CH14_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH14_Included (1UL) /*!< Channel included. */
+
+/* Bit 13 : Include CH13 in channel group. */
+#define PPI_CHG_CH13_Pos (13UL) /*!< Position of CH13 field. */
+#define PPI_CHG_CH13_Msk (0x1UL << PPI_CHG_CH13_Pos) /*!< Bit mask of CH13 field. */
+#define PPI_CHG_CH13_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH13_Included (1UL) /*!< Channel included. */
+
+/* Bit 12 : Include CH12 in channel group. */
+#define PPI_CHG_CH12_Pos (12UL) /*!< Position of CH12 field. */
+#define PPI_CHG_CH12_Msk (0x1UL << PPI_CHG_CH12_Pos) /*!< Bit mask of CH12 field. */
+#define PPI_CHG_CH12_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH12_Included (1UL) /*!< Channel included. */
+
+/* Bit 11 : Include CH11 in channel group. */
+#define PPI_CHG_CH11_Pos (11UL) /*!< Position of CH11 field. */
+#define PPI_CHG_CH11_Msk (0x1UL << PPI_CHG_CH11_Pos) /*!< Bit mask of CH11 field. */
+#define PPI_CHG_CH11_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH11_Included (1UL) /*!< Channel included. */
+
+/* Bit 10 : Include CH10 in channel group. */
+#define PPI_CHG_CH10_Pos (10UL) /*!< Position of CH10 field. */
+#define PPI_CHG_CH10_Msk (0x1UL << PPI_CHG_CH10_Pos) /*!< Bit mask of CH10 field. */
+#define PPI_CHG_CH10_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH10_Included (1UL) /*!< Channel included. */
+
+/* Bit 9 : Include CH9 in channel group. */
+#define PPI_CHG_CH9_Pos (9UL) /*!< Position of CH9 field. */
+#define PPI_CHG_CH9_Msk (0x1UL << PPI_CHG_CH9_Pos) /*!< Bit mask of CH9 field. */
+#define PPI_CHG_CH9_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH9_Included (1UL) /*!< Channel included. */
+
+/* Bit 8 : Include CH8 in channel group. */
+#define PPI_CHG_CH8_Pos (8UL) /*!< Position of CH8 field. */
+#define PPI_CHG_CH8_Msk (0x1UL << PPI_CHG_CH8_Pos) /*!< Bit mask of CH8 field. */
+#define PPI_CHG_CH8_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH8_Included (1UL) /*!< Channel included. */
+
+/* Bit 7 : Include CH7 in channel group. */
+#define PPI_CHG_CH7_Pos (7UL) /*!< Position of CH7 field. */
+#define PPI_CHG_CH7_Msk (0x1UL << PPI_CHG_CH7_Pos) /*!< Bit mask of CH7 field. */
+#define PPI_CHG_CH7_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH7_Included (1UL) /*!< Channel included. */
+
+/* Bit 6 : Include CH6 in channel group. */
+#define PPI_CHG_CH6_Pos (6UL) /*!< Position of CH6 field. */
+#define PPI_CHG_CH6_Msk (0x1UL << PPI_CHG_CH6_Pos) /*!< Bit mask of CH6 field. */
+#define PPI_CHG_CH6_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH6_Included (1UL) /*!< Channel included. */
+
+/* Bit 5 : Include CH5 in channel group. */
+#define PPI_CHG_CH5_Pos (5UL) /*!< Position of CH5 field. */
+#define PPI_CHG_CH5_Msk (0x1UL << PPI_CHG_CH5_Pos) /*!< Bit mask of CH5 field. */
+#define PPI_CHG_CH5_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH5_Included (1UL) /*!< Channel included. */
+
+/* Bit 4 : Include CH4 in channel group. */
+#define PPI_CHG_CH4_Pos (4UL) /*!< Position of CH4 field. */
+#define PPI_CHG_CH4_Msk (0x1UL << PPI_CHG_CH4_Pos) /*!< Bit mask of CH4 field. */
+#define PPI_CHG_CH4_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH4_Included (1UL) /*!< Channel included. */
+
+/* Bit 3 : Include CH3 in channel group. */
+#define PPI_CHG_CH3_Pos (3UL) /*!< Position of CH3 field. */
+#define PPI_CHG_CH3_Msk (0x1UL << PPI_CHG_CH3_Pos) /*!< Bit mask of CH3 field. */
+#define PPI_CHG_CH3_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH3_Included (1UL) /*!< Channel included. */
+
+/* Bit 2 : Include CH2 in channel group. */
+#define PPI_CHG_CH2_Pos (2UL) /*!< Position of CH2 field. */
+#define PPI_CHG_CH2_Msk (0x1UL << PPI_CHG_CH2_Pos) /*!< Bit mask of CH2 field. */
+#define PPI_CHG_CH2_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH2_Included (1UL) /*!< Channel included. */
+
+/* Bit 1 : Include CH1 in channel group. */
+#define PPI_CHG_CH1_Pos (1UL) /*!< Position of CH1 field. */
+#define PPI_CHG_CH1_Msk (0x1UL << PPI_CHG_CH1_Pos) /*!< Bit mask of CH1 field. */
+#define PPI_CHG_CH1_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH1_Included (1UL) /*!< Channel included. */
+
+/* Bit 0 : Include CH0 in channel group. */
+#define PPI_CHG_CH0_Pos (0UL) /*!< Position of CH0 field. */
+#define PPI_CHG_CH0_Msk (0x1UL << PPI_CHG_CH0_Pos) /*!< Bit mask of CH0 field. */
+#define PPI_CHG_CH0_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH0_Included (1UL) /*!< Channel included. */
+
+
+/* Peripheral: QDEC */
+/* Description: Rotary decoder. */
+
+/* Register: QDEC_SHORTS */
+/* Description: Shortcuts for the QDEC. */
+
+/* Bit 1 : Shortcut between SAMPLERDY event and STOP task. */
+#define QDEC_SHORTS_SAMPLERDY_STOP_Pos (1UL) /*!< Position of SAMPLERDY_STOP field. */
+#define QDEC_SHORTS_SAMPLERDY_STOP_Msk (0x1UL << QDEC_SHORTS_SAMPLERDY_STOP_Pos) /*!< Bit mask of SAMPLERDY_STOP field. */
+#define QDEC_SHORTS_SAMPLERDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define QDEC_SHORTS_SAMPLERDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 0 : Shortcut between REPORTRDY event and READCLRACC task. */
+#define QDEC_SHORTS_REPORTRDY_READCLRACC_Pos (0UL) /*!< Position of REPORTRDY_READCLRACC field. */
+#define QDEC_SHORTS_REPORTRDY_READCLRACC_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_READCLRACC_Pos) /*!< Bit mask of REPORTRDY_READCLRACC field. */
+#define QDEC_SHORTS_REPORTRDY_READCLRACC_Disabled (0UL) /*!< Shortcut disabled. */
+#define QDEC_SHORTS_REPORTRDY_READCLRACC_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: QDEC_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 2 : Enable interrupt on ACCOF event. */
+#define QDEC_INTENSET_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */
+#define QDEC_INTENSET_ACCOF_Msk (0x1UL << QDEC_INTENSET_ACCOF_Pos) /*!< Bit mask of ACCOF field. */
+#define QDEC_INTENSET_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */
+#define QDEC_INTENSET_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */
+#define QDEC_INTENSET_ACCOF_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on REPORTRDY event. */
+#define QDEC_INTENSET_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */
+#define QDEC_INTENSET_REPORTRDY_Msk (0x1UL << QDEC_INTENSET_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */
+#define QDEC_INTENSET_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define QDEC_INTENSET_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define QDEC_INTENSET_REPORTRDY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on SAMPLERDY event. */
+#define QDEC_INTENSET_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */
+#define QDEC_INTENSET_SAMPLERDY_Msk (0x1UL << QDEC_INTENSET_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */
+#define QDEC_INTENSET_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define QDEC_INTENSET_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define QDEC_INTENSET_SAMPLERDY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: QDEC_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 2 : Disable interrupt on ACCOF event. */
+#define QDEC_INTENCLR_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */
+#define QDEC_INTENCLR_ACCOF_Msk (0x1UL << QDEC_INTENCLR_ACCOF_Pos) /*!< Bit mask of ACCOF field. */
+#define QDEC_INTENCLR_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */
+#define QDEC_INTENCLR_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */
+#define QDEC_INTENCLR_ACCOF_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on REPORTRDY event. */
+#define QDEC_INTENCLR_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */
+#define QDEC_INTENCLR_REPORTRDY_Msk (0x1UL << QDEC_INTENCLR_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */
+#define QDEC_INTENCLR_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define QDEC_INTENCLR_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define QDEC_INTENCLR_REPORTRDY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on SAMPLERDY event. */
+#define QDEC_INTENCLR_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */
+#define QDEC_INTENCLR_SAMPLERDY_Msk (0x1UL << QDEC_INTENCLR_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */
+#define QDEC_INTENCLR_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define QDEC_INTENCLR_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define QDEC_INTENCLR_SAMPLERDY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: QDEC_ENABLE */
+/* Description: Enable the QDEC. */
+
+/* Bit 0 : Enable or disable QDEC. */
+#define QDEC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define QDEC_ENABLE_ENABLE_Msk (0x1UL << QDEC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define QDEC_ENABLE_ENABLE_Disabled (0UL) /*!< Disabled QDEC. */
+#define QDEC_ENABLE_ENABLE_Enabled (1UL) /*!< Enable QDEC. */
+
+/* Register: QDEC_LEDPOL */
+/* Description: LED output pin polarity. */
+
+/* Bit 0 : LED output pin polarity. */
+#define QDEC_LEDPOL_LEDPOL_Pos (0UL) /*!< Position of LEDPOL field. */
+#define QDEC_LEDPOL_LEDPOL_Msk (0x1UL << QDEC_LEDPOL_LEDPOL_Pos) /*!< Bit mask of LEDPOL field. */
+#define QDEC_LEDPOL_LEDPOL_ActiveLow (0UL) /*!< LED output is active low. */
+#define QDEC_LEDPOL_LEDPOL_ActiveHigh (1UL) /*!< LED output is active high. */
+
+/* Register: QDEC_SAMPLEPER */
+/* Description: Sample period. */
+
+/* Bits 2..0 : Sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_Pos (0UL) /*!< Position of SAMPLEPER field. */
+#define QDEC_SAMPLEPER_SAMPLEPER_Msk (0x7UL << QDEC_SAMPLEPER_SAMPLEPER_Pos) /*!< Bit mask of SAMPLEPER field. */
+#define QDEC_SAMPLEPER_SAMPLEPER_128us (0x00UL) /*!< 128us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_256us (0x01UL) /*!< 256us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_512us (0x02UL) /*!< 512us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_1024us (0x03UL) /*!< 1024us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_2048us (0x04UL) /*!< 2048us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_4096us (0x05UL) /*!< 4096us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_8192us (0x06UL) /*!< 8192us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_16384us (0x07UL) /*!< 16384us sample period. */
+
+/* Register: QDEC_SAMPLE */
+/* Description: Motion sample value. */
+
+/* Bits 31..0 : Last sample taken in compliment to 2. */
+#define QDEC_SAMPLE_SAMPLE_Pos (0UL) /*!< Position of SAMPLE field. */
+#define QDEC_SAMPLE_SAMPLE_Msk (0xFFFFFFFFUL << QDEC_SAMPLE_SAMPLE_Pos) /*!< Bit mask of SAMPLE field. */
+
+/* Register: QDEC_REPORTPER */
+/* Description: Number of samples to generate an EVENT_REPORTRDY. */
+
+/* Bits 2..0 : Number of samples to generate an EVENT_REPORTRDY. */
+#define QDEC_REPORTPER_REPORTPER_Pos (0UL) /*!< Position of REPORTPER field. */
+#define QDEC_REPORTPER_REPORTPER_Msk (0x7UL << QDEC_REPORTPER_REPORTPER_Pos) /*!< Bit mask of REPORTPER field. */
+#define QDEC_REPORTPER_REPORTPER_10Smpl (0x00UL) /*!< 10 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_40Smpl (0x01UL) /*!< 40 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_80Smpl (0x02UL) /*!< 80 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_120Smpl (0x03UL) /*!< 120 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_160Smpl (0x04UL) /*!< 160 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_200Smpl (0x05UL) /*!< 200 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_240Smpl (0x06UL) /*!< 240 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_280Smpl (0x07UL) /*!< 280 samples per report. */
+
+/* Register: QDEC_DBFEN */
+/* Description: Enable debouncer input filters. */
+
+/* Bit 0 : Enable debounce input filters. */
+#define QDEC_DBFEN_DBFEN_Pos (0UL) /*!< Position of DBFEN field. */
+#define QDEC_DBFEN_DBFEN_Msk (0x1UL << QDEC_DBFEN_DBFEN_Pos) /*!< Bit mask of DBFEN field. */
+#define QDEC_DBFEN_DBFEN_Disabled (0UL) /*!< Debounce input filters disabled. */
+#define QDEC_DBFEN_DBFEN_Enabled (1UL) /*!< Debounce input filters enabled. */
+
+/* Register: QDEC_LEDPRE */
+/* Description: Time LED is switched ON before the sample. */
+
+/* Bits 8..0 : Period in us the LED in switched on prior to sampling. */
+#define QDEC_LEDPRE_LEDPRE_Pos (0UL) /*!< Position of LEDPRE field. */
+#define QDEC_LEDPRE_LEDPRE_Msk (0x1FFUL << QDEC_LEDPRE_LEDPRE_Pos) /*!< Bit mask of LEDPRE field. */
+
+/* Register: QDEC_ACCDBL */
+/* Description: Accumulated double (error) transitions register. */
+
+/* Bits 3..0 : Accumulated double (error) transitions. */
+#define QDEC_ACCDBL_ACCDBL_Pos (0UL) /*!< Position of ACCDBL field. */
+#define QDEC_ACCDBL_ACCDBL_Msk (0xFUL << QDEC_ACCDBL_ACCDBL_Pos) /*!< Bit mask of ACCDBL field. */
+
+/* Register: QDEC_ACCDBLREAD */
+/* Description: Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC task. */
+
+/* Bits 3..0 : Snapshot of accumulated double (error) transitions. */
+#define QDEC_ACCDBLREAD_ACCDBLREAD_Pos (0UL) /*!< Position of ACCDBLREAD field. */
+#define QDEC_ACCDBLREAD_ACCDBLREAD_Msk (0xFUL << QDEC_ACCDBLREAD_ACCDBLREAD_Pos) /*!< Bit mask of ACCDBLREAD field. */
+
+/* Register: QDEC_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define QDEC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define QDEC_POWER_POWER_Msk (0x1UL << QDEC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define QDEC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define QDEC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: RADIO */
+/* Description: The radio. */
+
+/* Register: RADIO_SHORTS */
+/* Description: Shortcuts for the radio. */
+
+/* Bit 8 : Shortcut between DISABLED event and RSSISTOP task. */
+#define RADIO_SHORTS_DISABLED_RSSISTOP_Pos (8UL) /*!< Position of DISABLED_RSSISTOP field. */
+#define RADIO_SHORTS_DISABLED_RSSISTOP_Msk (0x1UL << RADIO_SHORTS_DISABLED_RSSISTOP_Pos) /*!< Bit mask of DISABLED_RSSISTOP field. */
+#define RADIO_SHORTS_DISABLED_RSSISTOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_DISABLED_RSSISTOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 6 : Shortcut between ADDRESS event and BCSTART task. */
+#define RADIO_SHORTS_ADDRESS_BCSTART_Pos (6UL) /*!< Position of ADDRESS_BCSTART field. */
+#define RADIO_SHORTS_ADDRESS_BCSTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_BCSTART_Pos) /*!< Bit mask of ADDRESS_BCSTART field. */
+#define RADIO_SHORTS_ADDRESS_BCSTART_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_ADDRESS_BCSTART_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 5 : Shortcut between END event and START task. */
+#define RADIO_SHORTS_END_START_Pos (5UL) /*!< Position of END_START field. */
+#define RADIO_SHORTS_END_START_Msk (0x1UL << RADIO_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */
+#define RADIO_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 4 : Shortcut between ADDRESS event and RSSISTART task. */
+#define RADIO_SHORTS_ADDRESS_RSSISTART_Pos (4UL) /*!< Position of ADDRESS_RSSISTART field. */
+#define RADIO_SHORTS_ADDRESS_RSSISTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_RSSISTART_Pos) /*!< Bit mask of ADDRESS_RSSISTART field. */
+#define RADIO_SHORTS_ADDRESS_RSSISTART_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_ADDRESS_RSSISTART_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 3 : Shortcut between DISABLED event and RXEN task. */
+#define RADIO_SHORTS_DISABLED_RXEN_Pos (3UL) /*!< Position of DISABLED_RXEN field. */
+#define RADIO_SHORTS_DISABLED_RXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_RXEN_Pos) /*!< Bit mask of DISABLED_RXEN field. */
+#define RADIO_SHORTS_DISABLED_RXEN_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_DISABLED_RXEN_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 2 : Shortcut between DISABLED event and TXEN task. */
+#define RADIO_SHORTS_DISABLED_TXEN_Pos (2UL) /*!< Position of DISABLED_TXEN field. */
+#define RADIO_SHORTS_DISABLED_TXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_TXEN_Pos) /*!< Bit mask of DISABLED_TXEN field. */
+#define RADIO_SHORTS_DISABLED_TXEN_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_DISABLED_TXEN_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 1 : Shortcut between END event and DISABLE task. */
+#define RADIO_SHORTS_END_DISABLE_Pos (1UL) /*!< Position of END_DISABLE field. */
+#define RADIO_SHORTS_END_DISABLE_Msk (0x1UL << RADIO_SHORTS_END_DISABLE_Pos) /*!< Bit mask of END_DISABLE field. */
+#define RADIO_SHORTS_END_DISABLE_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_END_DISABLE_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 0 : Shortcut between READY event and START task. */
+#define RADIO_SHORTS_READY_START_Pos (0UL) /*!< Position of READY_START field. */
+#define RADIO_SHORTS_READY_START_Msk (0x1UL << RADIO_SHORTS_READY_START_Pos) /*!< Bit mask of READY_START field. */
+#define RADIO_SHORTS_READY_START_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_READY_START_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: RADIO_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 10 : Enable interrupt on BCMATCH event. */
+#define RADIO_INTENSET_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */
+#define RADIO_INTENSET_BCMATCH_Msk (0x1UL << RADIO_INTENSET_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */
+#define RADIO_INTENSET_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_BCMATCH_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 7 : Enable interrupt on RSSIEND event. */
+#define RADIO_INTENSET_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */
+#define RADIO_INTENSET_RSSIEND_Msk (0x1UL << RADIO_INTENSET_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */
+#define RADIO_INTENSET_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_RSSIEND_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 6 : Enable interrupt on DEVMISS event. */
+#define RADIO_INTENSET_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */
+#define RADIO_INTENSET_DEVMISS_Msk (0x1UL << RADIO_INTENSET_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */
+#define RADIO_INTENSET_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_DEVMISS_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 5 : Enable interrupt on DEVMATCH event. */
+#define RADIO_INTENSET_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */
+#define RADIO_INTENSET_DEVMATCH_Msk (0x1UL << RADIO_INTENSET_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */
+#define RADIO_INTENSET_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_DEVMATCH_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 4 : Enable interrupt on DISABLED event. */
+#define RADIO_INTENSET_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */
+#define RADIO_INTENSET_DISABLED_Msk (0x1UL << RADIO_INTENSET_DISABLED_Pos) /*!< Bit mask of DISABLED field. */
+#define RADIO_INTENSET_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_DISABLED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 3 : Enable interrupt on END event. */
+#define RADIO_INTENSET_END_Pos (3UL) /*!< Position of END field. */
+#define RADIO_INTENSET_END_Msk (0x1UL << RADIO_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define RADIO_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 2 : Enable interrupt on PAYLOAD event. */
+#define RADIO_INTENSET_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */
+#define RADIO_INTENSET_PAYLOAD_Msk (0x1UL << RADIO_INTENSET_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */
+#define RADIO_INTENSET_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_PAYLOAD_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on ADDRESS event. */
+#define RADIO_INTENSET_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */
+#define RADIO_INTENSET_ADDRESS_Msk (0x1UL << RADIO_INTENSET_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */
+#define RADIO_INTENSET_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_ADDRESS_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on READY event. */
+#define RADIO_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */
+#define RADIO_INTENSET_READY_Msk (0x1UL << RADIO_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
+#define RADIO_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: RADIO_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 10 : Disable interrupt on BCMATCH event. */
+#define RADIO_INTENCLR_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */
+#define RADIO_INTENCLR_BCMATCH_Msk (0x1UL << RADIO_INTENCLR_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */
+#define RADIO_INTENCLR_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_BCMATCH_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 7 : Disable interrupt on RSSIEND event. */
+#define RADIO_INTENCLR_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */
+#define RADIO_INTENCLR_RSSIEND_Msk (0x1UL << RADIO_INTENCLR_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */
+#define RADIO_INTENCLR_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_RSSIEND_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 6 : Disable interrupt on DEVMISS event. */
+#define RADIO_INTENCLR_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */
+#define RADIO_INTENCLR_DEVMISS_Msk (0x1UL << RADIO_INTENCLR_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */
+#define RADIO_INTENCLR_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_DEVMISS_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 5 : Disable interrupt on DEVMATCH event. */
+#define RADIO_INTENCLR_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */
+#define RADIO_INTENCLR_DEVMATCH_Msk (0x1UL << RADIO_INTENCLR_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */
+#define RADIO_INTENCLR_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_DEVMATCH_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 4 : Disable interrupt on DISABLED event. */
+#define RADIO_INTENCLR_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */
+#define RADIO_INTENCLR_DISABLED_Msk (0x1UL << RADIO_INTENCLR_DISABLED_Pos) /*!< Bit mask of DISABLED field. */
+#define RADIO_INTENCLR_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_DISABLED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 3 : Disable interrupt on END event. */
+#define RADIO_INTENCLR_END_Pos (3UL) /*!< Position of END field. */
+#define RADIO_INTENCLR_END_Msk (0x1UL << RADIO_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define RADIO_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 2 : Disable interrupt on PAYLOAD event. */
+#define RADIO_INTENCLR_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */
+#define RADIO_INTENCLR_PAYLOAD_Msk (0x1UL << RADIO_INTENCLR_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */
+#define RADIO_INTENCLR_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_PAYLOAD_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on ADDRESS event. */
+#define RADIO_INTENCLR_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */
+#define RADIO_INTENCLR_ADDRESS_Msk (0x1UL << RADIO_INTENCLR_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */
+#define RADIO_INTENCLR_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_ADDRESS_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on READY event. */
+#define RADIO_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */
+#define RADIO_INTENCLR_READY_Msk (0x1UL << RADIO_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
+#define RADIO_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: RADIO_CRCSTATUS */
+/* Description: CRC status of received packet. */
+
+/* Bit 0 : CRC status of received packet. */
+#define RADIO_CRCSTATUS_CRCSTATUS_Pos (0UL) /*!< Position of CRCSTATUS field. */
+#define RADIO_CRCSTATUS_CRCSTATUS_Msk (0x1UL << RADIO_CRCSTATUS_CRCSTATUS_Pos) /*!< Bit mask of CRCSTATUS field. */
+#define RADIO_CRCSTATUS_CRCSTATUS_CRCError (0UL) /*!< Packet received with CRC error. */
+#define RADIO_CRCSTATUS_CRCSTATUS_CRCOk (1UL) /*!< Packet received with CRC ok. */
+
+/* Register: RADIO_RXMATCH */
+/* Description: Received address. */
+
+/* Bits 2..0 : Logical address in which previous packet was received. */
+#define RADIO_RXMATCH_RXMATCH_Pos (0UL) /*!< Position of RXMATCH field. */
+#define RADIO_RXMATCH_RXMATCH_Msk (0x7UL << RADIO_RXMATCH_RXMATCH_Pos) /*!< Bit mask of RXMATCH field. */
+
+/* Register: RADIO_RXCRC */
+/* Description: Received CRC. */
+
+/* Bits 23..0 : CRC field of previously received packet. */
+#define RADIO_RXCRC_RXCRC_Pos (0UL) /*!< Position of RXCRC field. */
+#define RADIO_RXCRC_RXCRC_Msk (0xFFFFFFUL << RADIO_RXCRC_RXCRC_Pos) /*!< Bit mask of RXCRC field. */
+
+/* Register: RADIO_DAI */
+/* Description: Device address match index. */
+
+/* Bits 2..0 : Index (n) of device address (see DAB[n] and DAP[n]) that obtained an address match. */
+#define RADIO_DAI_DAI_Pos (0UL) /*!< Position of DAI field. */
+#define RADIO_DAI_DAI_Msk (0x7UL << RADIO_DAI_DAI_Pos) /*!< Bit mask of DAI field. */
+
+/* Register: RADIO_FREQUENCY */
+/* Description: Frequency. */
+
+/* Bits 6..0 : Radio channel frequency offset in MHz: RF Frequency = 2400 + FREQUENCY (MHz). Decision point: TXEN or RXEN task. */
+#define RADIO_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
+#define RADIO_FREQUENCY_FREQUENCY_Msk (0x7FUL << RADIO_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
+
+/* Register: RADIO_TXPOWER */
+/* Description: Output power. */
+
+/* Bits 7..0 : Radio output power. Decision point: TXEN task. */
+#define RADIO_TXPOWER_TXPOWER_Pos (0UL) /*!< Position of TXPOWER field. */
+#define RADIO_TXPOWER_TXPOWER_Msk (0xFFUL << RADIO_TXPOWER_TXPOWER_Pos) /*!< Bit mask of TXPOWER field. */
+#define RADIO_TXPOWER_TXPOWER_0dBm (0x00UL) /*!< 0dBm. */
+#define RADIO_TXPOWER_TXPOWER_Pos4dBm (0x04UL) /*!< +4dBm. */
+#define RADIO_TXPOWER_TXPOWER_Neg30dBm (0xD8UL) /*!< -30dBm. */
+#define RADIO_TXPOWER_TXPOWER_Neg20dBm (0xECUL) /*!< -20dBm. */
+#define RADIO_TXPOWER_TXPOWER_Neg16dBm (0xF0UL) /*!< -16dBm. */
+#define RADIO_TXPOWER_TXPOWER_Neg12dBm (0xF4UL) /*!< -12dBm. */
+#define RADIO_TXPOWER_TXPOWER_Neg8dBm (0xF8UL) /*!< -8dBm. */
+#define RADIO_TXPOWER_TXPOWER_Neg4dBm (0xFCUL) /*!< -4dBm. */
+
+/* Register: RADIO_MODE */
+/* Description: Data rate and modulation. */
+
+/* Bits 1..0 : Radio data rate and modulation setting. Decision point: TXEN or RXEN task. */
+#define RADIO_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */
+#define RADIO_MODE_MODE_Msk (0x3UL << RADIO_MODE_MODE_Pos) /*!< Bit mask of MODE field. */
+#define RADIO_MODE_MODE_Nrf_1Mbit (0x00UL) /*!< 1Mbit/s Nordic propietary radio mode. */
+#define RADIO_MODE_MODE_Nrf_2Mbit (0x01UL) /*!< 2Mbit/s Nordic propietary radio mode. */
+#define RADIO_MODE_MODE_Nrf_250Kbit (0x02UL) /*!< 250kbit/s Nordic propietary radio mode. */
+#define RADIO_MODE_MODE_Ble_1Mbit (0x03UL) /*!< 1Mbit/s Bluetooth Low Energy */
+
+/* Register: RADIO_PCNF0 */
+/* Description: Packet configuration 0. */
+
+/* Bits 19..16 : Length of S1 field in number of bits. Decision point: START task. */
+#define RADIO_PCNF0_S1LEN_Pos (16UL) /*!< Position of S1LEN field. */
+#define RADIO_PCNF0_S1LEN_Msk (0xFUL << RADIO_PCNF0_S1LEN_Pos) /*!< Bit mask of S1LEN field. */
+
+/* Bit 8 : Length of S0 field in number of bytes. Decision point: START task. */
+#define RADIO_PCNF0_S0LEN_Pos (8UL) /*!< Position of S0LEN field. */
+#define RADIO_PCNF0_S0LEN_Msk (0x1UL << RADIO_PCNF0_S0LEN_Pos) /*!< Bit mask of S0LEN field. */
+
+/* Bits 3..0 : Length of length field in number of bits. Decision point: START task. */
+#define RADIO_PCNF0_LFLEN_Pos (0UL) /*!< Position of LFLEN field. */
+#define RADIO_PCNF0_LFLEN_Msk (0xFUL << RADIO_PCNF0_LFLEN_Pos) /*!< Bit mask of LFLEN field. */
+
+/* Register: RADIO_PCNF1 */
+/* Description: Packet configuration 1. */
+
+/* Bit 25 : Packet whitening enable. */
+#define RADIO_PCNF1_WHITEEN_Pos (25UL) /*!< Position of WHITEEN field. */
+#define RADIO_PCNF1_WHITEEN_Msk (0x1UL << RADIO_PCNF1_WHITEEN_Pos) /*!< Bit mask of WHITEEN field. */
+#define RADIO_PCNF1_WHITEEN_Disabled (0UL) /*!< Whitening disabled. */
+#define RADIO_PCNF1_WHITEEN_Enabled (1UL) /*!< Whitening enabled. */
+
+/* Bit 24 : On air endianness of packet length field. Decision point: START task. */
+#define RADIO_PCNF1_ENDIAN_Pos (24UL) /*!< Position of ENDIAN field. */
+#define RADIO_PCNF1_ENDIAN_Msk (0x1UL << RADIO_PCNF1_ENDIAN_Pos) /*!< Bit mask of ENDIAN field. */
+#define RADIO_PCNF1_ENDIAN_Little (0UL) /*!< Least significant bit on air first */
+#define RADIO_PCNF1_ENDIAN_Big (1UL) /*!< Most significant bit on air first */
+
+/* Bits 18..16 : Base address length in number of bytes. Decision point: START task. */
+#define RADIO_PCNF1_BALEN_Pos (16UL) /*!< Position of BALEN field. */
+#define RADIO_PCNF1_BALEN_Msk (0x7UL << RADIO_PCNF1_BALEN_Pos) /*!< Bit mask of BALEN field. */
+
+/* Bits 15..8 : Static length in number of bytes. Decision point: START task. */
+#define RADIO_PCNF1_STATLEN_Pos (8UL) /*!< Position of STATLEN field. */
+#define RADIO_PCNF1_STATLEN_Msk (0xFFUL << RADIO_PCNF1_STATLEN_Pos) /*!< Bit mask of STATLEN field. */
+
+/* Bits 7..0 : Maximum length of packet payload in number of bytes. */
+#define RADIO_PCNF1_MAXLEN_Pos (0UL) /*!< Position of MAXLEN field. */
+#define RADIO_PCNF1_MAXLEN_Msk (0xFFUL << RADIO_PCNF1_MAXLEN_Pos) /*!< Bit mask of MAXLEN field. */
+
+/* Register: RADIO_PREFIX0 */
+/* Description: Prefixes bytes for logical addresses 0 to 3. */
+
+/* Bits 31..24 : Address prefix 3. Decision point: START task. */
+#define RADIO_PREFIX0_AP3_Pos (24UL) /*!< Position of AP3 field. */
+#define RADIO_PREFIX0_AP3_Msk (0xFFUL << RADIO_PREFIX0_AP3_Pos) /*!< Bit mask of AP3 field. */
+
+/* Bits 23..16 : Address prefix 2. Decision point: START task. */
+#define RADIO_PREFIX0_AP2_Pos (16UL) /*!< Position of AP2 field. */
+#define RADIO_PREFIX0_AP2_Msk (0xFFUL << RADIO_PREFIX0_AP2_Pos) /*!< Bit mask of AP2 field. */
+
+/* Bits 15..8 : Address prefix 1. Decision point: START task. */
+#define RADIO_PREFIX0_AP1_Pos (8UL) /*!< Position of AP1 field. */
+#define RADIO_PREFIX0_AP1_Msk (0xFFUL << RADIO_PREFIX0_AP1_Pos) /*!< Bit mask of AP1 field. */
+
+/* Bits 7..0 : Address prefix 0. Decision point: START task. */
+#define RADIO_PREFIX0_AP0_Pos (0UL) /*!< Position of AP0 field. */
+#define RADIO_PREFIX0_AP0_Msk (0xFFUL << RADIO_PREFIX0_AP0_Pos) /*!< Bit mask of AP0 field. */
+
+/* Register: RADIO_PREFIX1 */
+/* Description: Prefixes bytes for logical addresses 4 to 7. */
+
+/* Bits 31..24 : Address prefix 7. Decision point: START task. */
+#define RADIO_PREFIX1_AP7_Pos (24UL) /*!< Position of AP7 field. */
+#define RADIO_PREFIX1_AP7_Msk (0xFFUL << RADIO_PREFIX1_AP7_Pos) /*!< Bit mask of AP7 field. */
+
+/* Bits 23..16 : Address prefix 6. Decision point: START task. */
+#define RADIO_PREFIX1_AP6_Pos (16UL) /*!< Position of AP6 field. */
+#define RADIO_PREFIX1_AP6_Msk (0xFFUL << RADIO_PREFIX1_AP6_Pos) /*!< Bit mask of AP6 field. */
+
+/* Bits 15..8 : Address prefix 5. Decision point: START task. */
+#define RADIO_PREFIX1_AP5_Pos (8UL) /*!< Position of AP5 field. */
+#define RADIO_PREFIX1_AP5_Msk (0xFFUL << RADIO_PREFIX1_AP5_Pos) /*!< Bit mask of AP5 field. */
+
+/* Bits 7..0 : Address prefix 4. Decision point: START task. */
+#define RADIO_PREFIX1_AP4_Pos (0UL) /*!< Position of AP4 field. */
+#define RADIO_PREFIX1_AP4_Msk (0xFFUL << RADIO_PREFIX1_AP4_Pos) /*!< Bit mask of AP4 field. */
+
+/* Register: RADIO_TXADDRESS */
+/* Description: Transmit address select. */
+
+/* Bits 2..0 : Logical address to be used when transmitting a packet. Decision point: START task. */
+#define RADIO_TXADDRESS_TXADDRESS_Pos (0UL) /*!< Position of TXADDRESS field. */
+#define RADIO_TXADDRESS_TXADDRESS_Msk (0x7UL << RADIO_TXADDRESS_TXADDRESS_Pos) /*!< Bit mask of TXADDRESS field. */
+
+/* Register: RADIO_RXADDRESSES */
+/* Description: Receive address select. */
+
+/* Bit 7 : Enable reception on logical address 7. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR7_Pos (7UL) /*!< Position of ADDR7 field. */
+#define RADIO_RXADDRESSES_ADDR7_Msk (0x1UL << RADIO_RXADDRESSES_ADDR7_Pos) /*!< Bit mask of ADDR7 field. */
+#define RADIO_RXADDRESSES_ADDR7_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR7_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 6 : Enable reception on logical address 6. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR6_Pos (6UL) /*!< Position of ADDR6 field. */
+#define RADIO_RXADDRESSES_ADDR6_Msk (0x1UL << RADIO_RXADDRESSES_ADDR6_Pos) /*!< Bit mask of ADDR6 field. */
+#define RADIO_RXADDRESSES_ADDR6_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR6_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 5 : Enable reception on logical address 5. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR5_Pos (5UL) /*!< Position of ADDR5 field. */
+#define RADIO_RXADDRESSES_ADDR5_Msk (0x1UL << RADIO_RXADDRESSES_ADDR5_Pos) /*!< Bit mask of ADDR5 field. */
+#define RADIO_RXADDRESSES_ADDR5_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR5_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 4 : Enable reception on logical address 4. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR4_Pos (4UL) /*!< Position of ADDR4 field. */
+#define RADIO_RXADDRESSES_ADDR4_Msk (0x1UL << RADIO_RXADDRESSES_ADDR4_Pos) /*!< Bit mask of ADDR4 field. */
+#define RADIO_RXADDRESSES_ADDR4_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR4_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 3 : Enable reception on logical address 3. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR3_Pos (3UL) /*!< Position of ADDR3 field. */
+#define RADIO_RXADDRESSES_ADDR3_Msk (0x1UL << RADIO_RXADDRESSES_ADDR3_Pos) /*!< Bit mask of ADDR3 field. */
+#define RADIO_RXADDRESSES_ADDR3_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR3_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 2 : Enable reception on logical address 2. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR2_Pos (2UL) /*!< Position of ADDR2 field. */
+#define RADIO_RXADDRESSES_ADDR2_Msk (0x1UL << RADIO_RXADDRESSES_ADDR2_Pos) /*!< Bit mask of ADDR2 field. */
+#define RADIO_RXADDRESSES_ADDR2_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR2_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 1 : Enable reception on logical address 1. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR1_Pos (1UL) /*!< Position of ADDR1 field. */
+#define RADIO_RXADDRESSES_ADDR1_Msk (0x1UL << RADIO_RXADDRESSES_ADDR1_Pos) /*!< Bit mask of ADDR1 field. */
+#define RADIO_RXADDRESSES_ADDR1_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR1_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 0 : Enable reception on logical address 0. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR0_Pos (0UL) /*!< Position of ADDR0 field. */
+#define RADIO_RXADDRESSES_ADDR0_Msk (0x1UL << RADIO_RXADDRESSES_ADDR0_Pos) /*!< Bit mask of ADDR0 field. */
+#define RADIO_RXADDRESSES_ADDR0_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR0_Enabled (1UL) /*!< Reception enabled. */
+
+/* Register: RADIO_CRCCNF */
+/* Description: CRC configuration. */
+
+/* Bit 8 : Leave packet address field out of the CRC calculation. Decision point: START task. */
+#define RADIO_CRCCNF_SKIPADDR_Pos (8UL) /*!< Position of SKIPADDR field. */
+#define RADIO_CRCCNF_SKIPADDR_Msk (0x1UL << RADIO_CRCCNF_SKIPADDR_Pos) /*!< Bit mask of SKIPADDR field. */
+#define RADIO_CRCCNF_SKIPADDR_Include (0UL) /*!< Include packet address in CRC calculation. */
+#define RADIO_CRCCNF_SKIPADDR_Skip (1UL) /*!< Packet address is skipped in CRC calculation. The CRC calculation will start at the first byte after the address. */
+
+/* Bits 1..0 : CRC length. Decision point: START task. */
+#define RADIO_CRCCNF_LEN_Pos (0UL) /*!< Position of LEN field. */
+#define RADIO_CRCCNF_LEN_Msk (0x3UL << RADIO_CRCCNF_LEN_Pos) /*!< Bit mask of LEN field. */
+#define RADIO_CRCCNF_LEN_Disabled (0UL) /*!< CRC calculation disabled. */
+#define RADIO_CRCCNF_LEN_One (1UL) /*!< One byte long CRC. */
+#define RADIO_CRCCNF_LEN_Two (2UL) /*!< Two bytes long CRC. */
+#define RADIO_CRCCNF_LEN_Three (3UL) /*!< Three bytes long CRC. */
+
+/* Register: RADIO_CRCPOLY */
+/* Description: CRC polynomial. */
+
+/* Bits 23..0 : CRC polynomial. Decision point: START task. */
+#define RADIO_CRCPOLY_CRCPOLY_Pos (0UL) /*!< Position of CRCPOLY field. */
+#define RADIO_CRCPOLY_CRCPOLY_Msk (0xFFFFFFUL << RADIO_CRCPOLY_CRCPOLY_Pos) /*!< Bit mask of CRCPOLY field. */
+
+/* Register: RADIO_CRCINIT */
+/* Description: CRC initial value. */
+
+/* Bits 23..0 : Initial value for CRC calculation. Decision point: START task. */
+#define RADIO_CRCINIT_CRCINIT_Pos (0UL) /*!< Position of CRCINIT field. */
+#define RADIO_CRCINIT_CRCINIT_Msk (0xFFFFFFUL << RADIO_CRCINIT_CRCINIT_Pos) /*!< Bit mask of CRCINIT field. */
+
+/* Register: RADIO_TEST */
+/* Description: Test features enable register. */
+
+/* Bit 1 : PLL lock. Decision point: TXEN or RXEN task. */
+#define RADIO_TEST_PLLLOCK_Pos (1UL) /*!< Position of PLLLOCK field. */
+#define RADIO_TEST_PLLLOCK_Msk (0x1UL << RADIO_TEST_PLLLOCK_Pos) /*!< Bit mask of PLLLOCK field. */
+#define RADIO_TEST_PLLLOCK_Disabled (0UL) /*!< PLL lock disabled. */
+#define RADIO_TEST_PLLLOCK_Enabled (1UL) /*!< PLL lock enabled. */
+
+/* Bit 0 : Constant carrier. Decision point: TXEN task. */
+#define RADIO_TEST_CONSTCARRIER_Pos (0UL) /*!< Position of CONSTCARRIER field. */
+#define RADIO_TEST_CONSTCARRIER_Msk (0x1UL << RADIO_TEST_CONSTCARRIER_Pos) /*!< Bit mask of CONSTCARRIER field. */
+#define RADIO_TEST_CONSTCARRIER_Disabled (0UL) /*!< Constant carrier disabled. */
+#define RADIO_TEST_CONSTCARRIER_Enabled (1UL) /*!< Constant carrier enabled. */
+
+/* Register: RADIO_TIFS */
+/* Description: Inter Frame Spacing in microseconds. */
+
+/* Bits 7..0 : Inter frame spacing in microseconds. Decision point: START rask */
+#define RADIO_TIFS_TIFS_Pos (0UL) /*!< Position of TIFS field. */
+#define RADIO_TIFS_TIFS_Msk (0xFFUL << RADIO_TIFS_TIFS_Pos) /*!< Bit mask of TIFS field. */
+
+/* Register: RADIO_RSSISAMPLE */
+/* Description: RSSI sample. */
+
+/* Bits 6..0 : RSSI sample result. The result is read as a positive value so that ReceivedSignalStrength = -RSSISAMPLE dBm */
+#define RADIO_RSSISAMPLE_RSSISAMPLE_Pos (0UL) /*!< Position of RSSISAMPLE field. */
+#define RADIO_RSSISAMPLE_RSSISAMPLE_Msk (0x7FUL << RADIO_RSSISAMPLE_RSSISAMPLE_Pos) /*!< Bit mask of RSSISAMPLE field. */
+
+/* Register: RADIO_STATE */
+/* Description: Current radio state. */
+
+/* Bits 3..0 : Current radio state. */
+#define RADIO_STATE_STATE_Pos (0UL) /*!< Position of STATE field. */
+#define RADIO_STATE_STATE_Msk (0xFUL << RADIO_STATE_STATE_Pos) /*!< Bit mask of STATE field. */
+#define RADIO_STATE_STATE_Disabled (0x00UL) /*!< Radio is in the Disabled state. */
+#define RADIO_STATE_STATE_RxRu (0x01UL) /*!< Radio is in the Rx Ramp Up state. */
+#define RADIO_STATE_STATE_RxIdle (0x02UL) /*!< Radio is in the Rx Idle state. */
+#define RADIO_STATE_STATE_Rx (0x03UL) /*!< Radio is in the Rx state. */
+#define RADIO_STATE_STATE_RxDisable (0x04UL) /*!< Radio is in the Rx Disable state. */
+#define RADIO_STATE_STATE_TxRu (0x09UL) /*!< Radio is in the Tx Ramp Up state. */
+#define RADIO_STATE_STATE_TxIdle (0x0AUL) /*!< Radio is in the Tx Idle state. */
+#define RADIO_STATE_STATE_Tx (0x0BUL) /*!< Radio is in the Tx state. */
+#define RADIO_STATE_STATE_TxDisable (0x0CUL) /*!< Radio is in the Tx Disable state. */
+
+/* Register: RADIO_DATAWHITEIV */
+/* Description: Data whitening initial value. */
+
+/* Bits 6..0 : Data whitening initial value. Bit 0 corresponds to Position 0 of the LSFR, Bit 1 to position 5... Decision point: TXEN or RXEN task. */
+#define RADIO_DATAWHITEIV_DATAWHITEIV_Pos (0UL) /*!< Position of DATAWHITEIV field. */
+#define RADIO_DATAWHITEIV_DATAWHITEIV_Msk (0x7FUL << RADIO_DATAWHITEIV_DATAWHITEIV_Pos) /*!< Bit mask of DATAWHITEIV field. */
+
+/* Register: RADIO_DAP */
+/* Description: Device address prefix. */
+
+/* Bits 15..0 : Device address prefix. */
+#define RADIO_DAP_DAP_Pos (0UL) /*!< Position of DAP field. */
+#define RADIO_DAP_DAP_Msk (0xFFFFUL << RADIO_DAP_DAP_Pos) /*!< Bit mask of DAP field. */
+
+/* Register: RADIO_DACNF */
+/* Description: Device address match configuration. */
+
+/* Bit 15 : TxAdd for device address 7. */
+#define RADIO_DACNF_TXADD7_Pos (15UL) /*!< Position of TXADD7 field. */
+#define RADIO_DACNF_TXADD7_Msk (0x1UL << RADIO_DACNF_TXADD7_Pos) /*!< Bit mask of TXADD7 field. */
+
+/* Bit 14 : TxAdd for device address 6. */
+#define RADIO_DACNF_TXADD6_Pos (14UL) /*!< Position of TXADD6 field. */
+#define RADIO_DACNF_TXADD6_Msk (0x1UL << RADIO_DACNF_TXADD6_Pos) /*!< Bit mask of TXADD6 field. */
+
+/* Bit 13 : TxAdd for device address 5. */
+#define RADIO_DACNF_TXADD5_Pos (13UL) /*!< Position of TXADD5 field. */
+#define RADIO_DACNF_TXADD5_Msk (0x1UL << RADIO_DACNF_TXADD5_Pos) /*!< Bit mask of TXADD5 field. */
+
+/* Bit 12 : TxAdd for device address 4. */
+#define RADIO_DACNF_TXADD4_Pos (12UL) /*!< Position of TXADD4 field. */
+#define RADIO_DACNF_TXADD4_Msk (0x1UL << RADIO_DACNF_TXADD4_Pos) /*!< Bit mask of TXADD4 field. */
+
+/* Bit 11 : TxAdd for device address 3. */
+#define RADIO_DACNF_TXADD3_Pos (11UL) /*!< Position of TXADD3 field. */
+#define RADIO_DACNF_TXADD3_Msk (0x1UL << RADIO_DACNF_TXADD3_Pos) /*!< Bit mask of TXADD3 field. */
+
+/* Bit 10 : TxAdd for device address 2. */
+#define RADIO_DACNF_TXADD2_Pos (10UL) /*!< Position of TXADD2 field. */
+#define RADIO_DACNF_TXADD2_Msk (0x1UL << RADIO_DACNF_TXADD2_Pos) /*!< Bit mask of TXADD2 field. */
+
+/* Bit 9 : TxAdd for device address 1. */
+#define RADIO_DACNF_TXADD1_Pos (9UL) /*!< Position of TXADD1 field. */
+#define RADIO_DACNF_TXADD1_Msk (0x1UL << RADIO_DACNF_TXADD1_Pos) /*!< Bit mask of TXADD1 field. */
+
+/* Bit 8 : TxAdd for device address 0. */
+#define RADIO_DACNF_TXADD0_Pos (8UL) /*!< Position of TXADD0 field. */
+#define RADIO_DACNF_TXADD0_Msk (0x1UL << RADIO_DACNF_TXADD0_Pos) /*!< Bit mask of TXADD0 field. */
+
+/* Bit 7 : Enable or disable device address matching using device address 7. */
+#define RADIO_DACNF_ENA7_Pos (7UL) /*!< Position of ENA7 field. */
+#define RADIO_DACNF_ENA7_Msk (0x1UL << RADIO_DACNF_ENA7_Pos) /*!< Bit mask of ENA7 field. */
+#define RADIO_DACNF_ENA7_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA7_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 6 : Enable or disable device address matching using device address 6. */
+#define RADIO_DACNF_ENA6_Pos (6UL) /*!< Position of ENA6 field. */
+#define RADIO_DACNF_ENA6_Msk (0x1UL << RADIO_DACNF_ENA6_Pos) /*!< Bit mask of ENA6 field. */
+#define RADIO_DACNF_ENA6_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA6_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 5 : Enable or disable device address matching using device address 5. */
+#define RADIO_DACNF_ENA5_Pos (5UL) /*!< Position of ENA5 field. */
+#define RADIO_DACNF_ENA5_Msk (0x1UL << RADIO_DACNF_ENA5_Pos) /*!< Bit mask of ENA5 field. */
+#define RADIO_DACNF_ENA5_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA5_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 4 : Enable or disable device address matching using device address 4. */
+#define RADIO_DACNF_ENA4_Pos (4UL) /*!< Position of ENA4 field. */
+#define RADIO_DACNF_ENA4_Msk (0x1UL << RADIO_DACNF_ENA4_Pos) /*!< Bit mask of ENA4 field. */
+#define RADIO_DACNF_ENA4_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA4_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 3 : Enable or disable device address matching using device address 3. */
+#define RADIO_DACNF_ENA3_Pos (3UL) /*!< Position of ENA3 field. */
+#define RADIO_DACNF_ENA3_Msk (0x1UL << RADIO_DACNF_ENA3_Pos) /*!< Bit mask of ENA3 field. */
+#define RADIO_DACNF_ENA3_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA3_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 2 : Enable or disable device address matching using device address 2. */
+#define RADIO_DACNF_ENA2_Pos (2UL) /*!< Position of ENA2 field. */
+#define RADIO_DACNF_ENA2_Msk (0x1UL << RADIO_DACNF_ENA2_Pos) /*!< Bit mask of ENA2 field. */
+#define RADIO_DACNF_ENA2_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA2_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 1 : Enable or disable device address matching using device address 1. */
+#define RADIO_DACNF_ENA1_Pos (1UL) /*!< Position of ENA1 field. */
+#define RADIO_DACNF_ENA1_Msk (0x1UL << RADIO_DACNF_ENA1_Pos) /*!< Bit mask of ENA1 field. */
+#define RADIO_DACNF_ENA1_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA1_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 0 : Enable or disable device address matching using device address 0. */
+#define RADIO_DACNF_ENA0_Pos (0UL) /*!< Position of ENA0 field. */
+#define RADIO_DACNF_ENA0_Msk (0x1UL << RADIO_DACNF_ENA0_Pos) /*!< Bit mask of ENA0 field. */
+#define RADIO_DACNF_ENA0_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA0_Enabled (1UL) /*!< Enabled. */
+
+/* Register: RADIO_OVERRIDE0 */
+/* Description: Trim value override register 0. */
+
+/* Bits 31..0 : Trim value override 0. */
+#define RADIO_OVERRIDE0_OVERRIDE0_Pos (0UL) /*!< Position of OVERRIDE0 field. */
+#define RADIO_OVERRIDE0_OVERRIDE0_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE0_OVERRIDE0_Pos) /*!< Bit mask of OVERRIDE0 field. */
+
+/* Register: RADIO_OVERRIDE1 */
+/* Description: Trim value override register 1. */
+
+/* Bits 31..0 : Trim value override 1. */
+#define RADIO_OVERRIDE1_OVERRIDE1_Pos (0UL) /*!< Position of OVERRIDE1 field. */
+#define RADIO_OVERRIDE1_OVERRIDE1_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE1_OVERRIDE1_Pos) /*!< Bit mask of OVERRIDE1 field. */
+
+/* Register: RADIO_OVERRIDE2 */
+/* Description: Trim value override register 2. */
+
+/* Bits 31..0 : Trim value override 2. */
+#define RADIO_OVERRIDE2_OVERRIDE2_Pos (0UL) /*!< Position of OVERRIDE2 field. */
+#define RADIO_OVERRIDE2_OVERRIDE2_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE2_OVERRIDE2_Pos) /*!< Bit mask of OVERRIDE2 field. */
+
+/* Register: RADIO_OVERRIDE3 */
+/* Description: Trim value override register 3. */
+
+/* Bits 31..0 : Trim value override 3. */
+#define RADIO_OVERRIDE3_OVERRIDE3_Pos (0UL) /*!< Position of OVERRIDE3 field. */
+#define RADIO_OVERRIDE3_OVERRIDE3_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE3_OVERRIDE3_Pos) /*!< Bit mask of OVERRIDE3 field. */
+
+/* Register: RADIO_OVERRIDE4 */
+/* Description: Trim value override register 4. */
+
+/* Bit 31 : Enable or disable override of default trim values. */
+#define RADIO_OVERRIDE4_ENABLE_Pos (31UL) /*!< Position of ENABLE field. */
+#define RADIO_OVERRIDE4_ENABLE_Msk (0x1UL << RADIO_OVERRIDE4_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define RADIO_OVERRIDE4_ENABLE_Disabled (0UL) /*!< Override trim values disabled. */
+#define RADIO_OVERRIDE4_ENABLE_Enabled (1UL) /*!< Override trim values enabled. */
+
+/* Bits 27..0 : Trim value override 4. */
+#define RADIO_OVERRIDE4_OVERRIDE4_Pos (0UL) /*!< Position of OVERRIDE4 field. */
+#define RADIO_OVERRIDE4_OVERRIDE4_Msk (0xFFFFFFFUL << RADIO_OVERRIDE4_OVERRIDE4_Pos) /*!< Bit mask of OVERRIDE4 field. */
+
+/* Register: RADIO_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define RADIO_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define RADIO_POWER_POWER_Msk (0x1UL << RADIO_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define RADIO_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define RADIO_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: RNG */
+/* Description: Random Number Generator. */
+
+/* Register: RNG_SHORTS */
+/* Description: Shortcuts for the RNG. */
+
+/* Bit 0 : Shortcut between VALRDY event and STOP task. */
+#define RNG_SHORTS_VALRDY_STOP_Pos (0UL) /*!< Position of VALRDY_STOP field. */
+#define RNG_SHORTS_VALRDY_STOP_Msk (0x1UL << RNG_SHORTS_VALRDY_STOP_Pos) /*!< Bit mask of VALRDY_STOP field. */
+#define RNG_SHORTS_VALRDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define RNG_SHORTS_VALRDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: RNG_INTENSET */
+/* Description: Interrupt enable set register */
+
+/* Bit 0 : Enable interrupt on VALRDY event. */
+#define RNG_INTENSET_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */
+#define RNG_INTENSET_VALRDY_Msk (0x1UL << RNG_INTENSET_VALRDY_Pos) /*!< Bit mask of VALRDY field. */
+#define RNG_INTENSET_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define RNG_INTENSET_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define RNG_INTENSET_VALRDY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: RNG_INTENCLR */
+/* Description: Interrupt enable clear register */
+
+/* Bit 0 : Disable interrupt on VALRDY event. */
+#define RNG_INTENCLR_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */
+#define RNG_INTENCLR_VALRDY_Msk (0x1UL << RNG_INTENCLR_VALRDY_Pos) /*!< Bit mask of VALRDY field. */
+#define RNG_INTENCLR_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define RNG_INTENCLR_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define RNG_INTENCLR_VALRDY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: RNG_CONFIG */
+/* Description: Configuration register. */
+
+/* Bit 0 : Digital error correction enable. */
+#define RNG_CONFIG_DERCEN_Pos (0UL) /*!< Position of DERCEN field. */
+#define RNG_CONFIG_DERCEN_Msk (0x1UL << RNG_CONFIG_DERCEN_Pos) /*!< Bit mask of DERCEN field. */
+#define RNG_CONFIG_DERCEN_Disabled (0UL) /*!< Digital error correction disabled. */
+#define RNG_CONFIG_DERCEN_Enabled (1UL) /*!< Digital error correction enabled. */
+
+/* Register: RNG_VALUE */
+/* Description: RNG random number. */
+
+/* Bits 7..0 : Generated random number. */
+#define RNG_VALUE_VALUE_Pos (0UL) /*!< Position of VALUE field. */
+#define RNG_VALUE_VALUE_Msk (0xFFUL << RNG_VALUE_VALUE_Pos) /*!< Bit mask of VALUE field. */
+
+/* Register: RNG_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define RNG_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define RNG_POWER_POWER_Msk (0x1UL << RNG_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define RNG_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define RNG_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: RTC */
+/* Description: Real time counter 0. */
+
+/* Register: RTC_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 19 : Enable interrupt on COMPARE[3] event. */
+#define RTC_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_INTENSET_COMPARE3_Msk (0x1UL << RTC_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 18 : Enable interrupt on COMPARE[2] event. */
+#define RTC_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_INTENSET_COMPARE2_Msk (0x1UL << RTC_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 17 : Enable interrupt on COMPARE[1] event. */
+#define RTC_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_INTENSET_COMPARE1_Msk (0x1UL << RTC_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 16 : Enable interrupt on COMPARE[0] event. */
+#define RTC_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_INTENSET_COMPARE0_Msk (0x1UL << RTC_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on OVRFLW event. */
+#define RTC_INTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_INTENSET_OVRFLW_Msk (0x1UL << RTC_INTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_INTENSET_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENSET_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENSET_OVRFLW_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on TICK event. */
+#define RTC_INTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_INTENSET_TICK_Msk (0x1UL << RTC_INTENSET_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_INTENSET_TICK_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENSET_TICK_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENSET_TICK_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: RTC_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 19 : Disable interrupt on COMPARE[3] event. */
+#define RTC_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_INTENCLR_COMPARE3_Msk (0x1UL << RTC_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 18 : Disable interrupt on COMPARE[2] event. */
+#define RTC_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_INTENCLR_COMPARE2_Msk (0x1UL << RTC_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 17 : Disable interrupt on COMPARE[1] event. */
+#define RTC_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_INTENCLR_COMPARE1_Msk (0x1UL << RTC_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 16 : Disable interrupt on COMPARE[0] event. */
+#define RTC_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_INTENCLR_COMPARE0_Msk (0x1UL << RTC_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on OVRFLW event. */
+#define RTC_INTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_INTENCLR_OVRFLW_Msk (0x1UL << RTC_INTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_INTENCLR_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENCLR_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENCLR_OVRFLW_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on TICK event. */
+#define RTC_INTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_INTENCLR_TICK_Msk (0x1UL << RTC_INTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_INTENCLR_TICK_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENCLR_TICK_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENCLR_TICK_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: RTC_EVTEN */
+/* Description: Configures event enable routing to PPI for each RTC event. */
+
+/* Bit 19 : COMPARE[3] event enable. */
+#define RTC_EVTEN_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_EVTEN_COMPARE3_Msk (0x1UL << RTC_EVTEN_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_EVTEN_COMPARE3_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTEN_COMPARE3_Enabled (1UL) /*!< Event enabled. */
+
+/* Bit 18 : COMPARE[2] event enable. */
+#define RTC_EVTEN_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_EVTEN_COMPARE2_Msk (0x1UL << RTC_EVTEN_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_EVTEN_COMPARE2_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTEN_COMPARE2_Enabled (1UL) /*!< Event enabled. */
+
+/* Bit 17 : COMPARE[1] event enable. */
+#define RTC_EVTEN_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_EVTEN_COMPARE1_Msk (0x1UL << RTC_EVTEN_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_EVTEN_COMPARE1_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTEN_COMPARE1_Enabled (1UL) /*!< Event enabled. */
+
+/* Bit 16 : COMPARE[0] event enable. */
+#define RTC_EVTEN_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_EVTEN_COMPARE0_Msk (0x1UL << RTC_EVTEN_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_EVTEN_COMPARE0_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTEN_COMPARE0_Enabled (1UL) /*!< Event enabled. */
+
+/* Bit 1 : OVRFLW event enable. */
+#define RTC_EVTEN_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_EVTEN_OVRFLW_Msk (0x1UL << RTC_EVTEN_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_EVTEN_OVRFLW_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTEN_OVRFLW_Enabled (1UL) /*!< Event enabled. */
+
+/* Bit 0 : TICK event enable. */
+#define RTC_EVTEN_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_EVTEN_TICK_Msk (0x1UL << RTC_EVTEN_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_EVTEN_TICK_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTEN_TICK_Enabled (1UL) /*!< Event enabled. */
+
+/* Register: RTC_EVTENSET */
+/* Description: Enable events routing to PPI. The reading of this register gives the value of EVTEN. */
+
+/* Bit 19 : Enable routing to PPI of COMPARE[3] event. */
+#define RTC_EVTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_EVTENSET_COMPARE3_Msk (0x1UL << RTC_EVTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_EVTENSET_COMPARE3_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENSET_COMPARE3_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENSET_COMPARE3_Set (1UL) /*!< Enable event on write. */
+
+/* Bit 18 : Enable routing to PPI of COMPARE[2] event. */
+#define RTC_EVTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_EVTENSET_COMPARE2_Msk (0x1UL << RTC_EVTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_EVTENSET_COMPARE2_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENSET_COMPARE2_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENSET_COMPARE2_Set (1UL) /*!< Enable event on write. */
+
+/* Bit 17 : Enable routing to PPI of COMPARE[1] event. */
+#define RTC_EVTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_EVTENSET_COMPARE1_Msk (0x1UL << RTC_EVTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_EVTENSET_COMPARE1_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENSET_COMPARE1_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENSET_COMPARE1_Set (1UL) /*!< Enable event on write. */
+
+/* Bit 16 : Enable routing to PPI of COMPARE[0] event. */
+#define RTC_EVTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_EVTENSET_COMPARE0_Msk (0x1UL << RTC_EVTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_EVTENSET_COMPARE0_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENSET_COMPARE0_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENSET_COMPARE0_Set (1UL) /*!< Enable event on write. */
+
+/* Bit 1 : Enable routing to PPI of OVRFLW event. */
+#define RTC_EVTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_EVTENSET_OVRFLW_Msk (0x1UL << RTC_EVTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_EVTENSET_OVRFLW_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENSET_OVRFLW_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENSET_OVRFLW_Set (1UL) /*!< Enable event on write. */
+
+/* Bit 0 : Enable routing to PPI of TICK event. */
+#define RTC_EVTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_EVTENSET_TICK_Msk (0x1UL << RTC_EVTENSET_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_EVTENSET_TICK_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENSET_TICK_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENSET_TICK_Set (1UL) /*!< Enable event on write. */
+
+/* Register: RTC_EVTENCLR */
+/* Description: Disable events routing to PPI. The reading of this register gives the value of EVTEN. */
+
+/* Bit 19 : Disable routing to PPI of COMPARE[3] event. */
+#define RTC_EVTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_EVTENCLR_COMPARE3_Msk (0x1UL << RTC_EVTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_EVTENCLR_COMPARE3_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENCLR_COMPARE3_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENCLR_COMPARE3_Clear (1UL) /*!< Disable event on write. */
+
+/* Bit 18 : Disable routing to PPI of COMPARE[2] event. */
+#define RTC_EVTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_EVTENCLR_COMPARE2_Msk (0x1UL << RTC_EVTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_EVTENCLR_COMPARE2_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENCLR_COMPARE2_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENCLR_COMPARE2_Clear (1UL) /*!< Disable event on write. */
+
+/* Bit 17 : Disable routing to PPI of COMPARE[1] event. */
+#define RTC_EVTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_EVTENCLR_COMPARE1_Msk (0x1UL << RTC_EVTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_EVTENCLR_COMPARE1_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENCLR_COMPARE1_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENCLR_COMPARE1_Clear (1UL) /*!< Disable event on write. */
+
+/* Bit 16 : Disable routing to PPI of COMPARE[0] event. */
+#define RTC_EVTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_EVTENCLR_COMPARE0_Msk (0x1UL << RTC_EVTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_EVTENCLR_COMPARE0_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENCLR_COMPARE0_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENCLR_COMPARE0_Clear (1UL) /*!< Disable event on write. */
+
+/* Bit 1 : Disable routing to PPI of OVRFLW event. */
+#define RTC_EVTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_EVTENCLR_OVRFLW_Msk (0x1UL << RTC_EVTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_EVTENCLR_OVRFLW_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENCLR_OVRFLW_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENCLR_OVRFLW_Clear (1UL) /*!< Disable event on write. */
+
+/* Bit 0 : Disable routing to PPI of TICK event. */
+#define RTC_EVTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_EVTENCLR_TICK_Msk (0x1UL << RTC_EVTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_EVTENCLR_TICK_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENCLR_TICK_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENCLR_TICK_Clear (1UL) /*!< Disable event on write. */
+
+/* Register: RTC_COUNTER */
+/* Description: Current COUNTER value. */
+
+/* Bits 23..0 : Counter value. */
+#define RTC_COUNTER_COUNTER_Pos (0UL) /*!< Position of COUNTER field. */
+#define RTC_COUNTER_COUNTER_Msk (0xFFFFFFUL << RTC_COUNTER_COUNTER_Pos) /*!< Bit mask of COUNTER field. */
+
+/* Register: RTC_PRESCALER */
+/* Description: 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). Must be written when RTC is STOPed. */
+
+/* Bits 11..0 : RTC PRESCALER value. */
+#define RTC_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */
+#define RTC_PRESCALER_PRESCALER_Msk (0xFFFUL << RTC_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */
+
+/* Register: RTC_CC */
+/* Description: Capture/compare registers. */
+
+/* Bits 23..0 : Compare value. */
+#define RTC_CC_COMPARE_Pos (0UL) /*!< Position of COMPARE field. */
+#define RTC_CC_COMPARE_Msk (0xFFFFFFUL << RTC_CC_COMPARE_Pos) /*!< Bit mask of COMPARE field. */
+
+/* Register: RTC_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define RTC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define RTC_POWER_POWER_Msk (0x1UL << RTC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define RTC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define RTC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: SPI */
+/* Description: SPI master 0. */
+
+/* Register: SPI_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 2 : Enable interrupt on READY event. */
+#define SPI_INTENSET_READY_Pos (2UL) /*!< Position of READY field. */
+#define SPI_INTENSET_READY_Msk (0x1UL << SPI_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
+#define SPI_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPI_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPI_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: SPI_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 2 : Disable interrupt on READY event. */
+#define SPI_INTENCLR_READY_Pos (2UL) /*!< Position of READY field. */
+#define SPI_INTENCLR_READY_Msk (0x1UL << SPI_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
+#define SPI_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPI_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPI_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: SPI_ENABLE */
+/* Description: Enable SPI. */
+
+/* Bits 2..0 : Enable or disable SPI. */
+#define SPI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define SPI_ENABLE_ENABLE_Msk (0x7UL << SPI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define SPI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPI. */
+#define SPI_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable SPI. */
+
+/* Register: SPI_RXD */
+/* Description: RX data. */
+
+/* Bits 7..0 : RX data from last transfer. */
+#define SPI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */
+#define SPI_RXD_RXD_Msk (0xFFUL << SPI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */
+
+/* Register: SPI_TXD */
+/* Description: TX data. */
+
+/* Bits 7..0 : TX data for next transfer. */
+#define SPI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */
+#define SPI_TXD_TXD_Msk (0xFFUL << SPI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */
+
+/* Register: SPI_FREQUENCY */
+/* Description: SPI frequency */
+
+/* Bits 31..0 : SPI data rate. */
+#define SPI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
+#define SPI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
+#define SPI_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125kbps. */
+#define SPI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250kbps. */
+#define SPI_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500kbps. */
+#define SPI_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1Mbps. */
+#define SPI_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2Mbps. */
+#define SPI_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4Mbps. */
+#define SPI_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8Mbps. */
+
+/* Register: SPI_CONFIG */
+/* Description: Configuration register. */
+
+/* Bit 2 : Serial clock (SCK) polarity. */
+#define SPI_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */
+#define SPI_CONFIG_CPOL_Msk (0x1UL << SPI_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */
+#define SPI_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */
+#define SPI_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */
+
+/* Bit 1 : Serial clock (SCK) phase. */
+#define SPI_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */
+#define SPI_CONFIG_CPHA_Msk (0x1UL << SPI_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */
+#define SPI_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */
+#define SPI_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */
+
+/* Bit 0 : Bit order. */
+#define SPI_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */
+#define SPI_CONFIG_ORDER_Msk (0x1UL << SPI_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */
+#define SPI_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */
+#define SPI_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */
+
+/* Register: SPI_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define SPI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define SPI_POWER_POWER_Msk (0x1UL << SPI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define SPI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define SPI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: SPIM */
+/* Description: SPI master with easyDMA 1. */
+
+/* Register: SPIM_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 19 : Enable interrupt on STARTED event. */
+#define SPIM_INTENSET_STARTED_Pos (19UL) /*!< Position of STARTED field. */
+#define SPIM_INTENSET_STARTED_Msk (0x1UL << SPIM_INTENSET_STARTED_Pos) /*!< Bit mask of STARTED field. */
+#define SPIM_INTENSET_STARTED_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIM_INTENSET_STARTED_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIM_INTENSET_STARTED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 8 : Enable interrupt on ENDTX event. */
+#define SPIM_INTENSET_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */
+#define SPIM_INTENSET_ENDTX_Msk (0x1UL << SPIM_INTENSET_ENDTX_Pos) /*!< Bit mask of ENDTX field. */
+#define SPIM_INTENSET_ENDTX_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIM_INTENSET_ENDTX_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIM_INTENSET_ENDTX_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 4 : Enable interrupt on ENDRX event. */
+#define SPIM_INTENSET_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
+#define SPIM_INTENSET_ENDRX_Msk (0x1UL << SPIM_INTENSET_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define SPIM_INTENSET_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIM_INTENSET_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIM_INTENSET_ENDRX_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on STOPPED event. */
+#define SPIM_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define SPIM_INTENSET_STOPPED_Msk (0x1UL << SPIM_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define SPIM_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIM_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIM_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: SPIM_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 19 : Disable interrupt on STARTED event. */
+#define SPIM_INTENCLR_STARTED_Pos (19UL) /*!< Position of STARTED field. */
+#define SPIM_INTENCLR_STARTED_Msk (0x1UL << SPIM_INTENCLR_STARTED_Pos) /*!< Bit mask of STARTED field. */
+#define SPIM_INTENCLR_STARTED_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIM_INTENCLR_STARTED_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIM_INTENCLR_STARTED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 8 : Disable interrupt on ENDTX event. */
+#define SPIM_INTENCLR_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */
+#define SPIM_INTENCLR_ENDTX_Msk (0x1UL << SPIM_INTENCLR_ENDTX_Pos) /*!< Bit mask of ENDTX field. */
+#define SPIM_INTENCLR_ENDTX_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIM_INTENCLR_ENDTX_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIM_INTENCLR_ENDTX_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 4 : Disable interrupt on ENDRX event. */
+#define SPIM_INTENCLR_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
+#define SPIM_INTENCLR_ENDRX_Msk (0x1UL << SPIM_INTENCLR_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define SPIM_INTENCLR_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIM_INTENCLR_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIM_INTENCLR_ENDRX_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on STOPPED event. */
+#define SPIM_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define SPIM_INTENCLR_STOPPED_Msk (0x1UL << SPIM_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define SPIM_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIM_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIM_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: SPIM_ENABLE */
+/* Description: Enable SPIM. */
+
+/* Bits 3..0 : Enable or disable SPIM. */
+#define SPIM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define SPIM_ENABLE_ENABLE_Msk (0xFUL << SPIM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define SPIM_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIM. */
+#define SPIM_ENABLE_ENABLE_Enabled (0x07UL) /*!< Enable SPIM. */
+
+/* Register: SPIM_FREQUENCY */
+/* Description: SPI frequency. */
+
+/* Bits 31..0 : SPI master data rate. */
+#define SPIM_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
+#define SPIM_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPIM_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
+#define SPIM_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125 kbps. */
+#define SPIM_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */
+#define SPIM_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500 kbps. */
+#define SPIM_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1 Mbps. */
+#define SPIM_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2 Mbps. */
+#define SPIM_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4 Mbps. */
+#define SPIM_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8 Mbps. */
+
+/* Register: SPIM_RXD_PTR */
+/* Description: Data pointer. */
+
+/* Bits 31..0 : Data pointer. */
+#define SPIM_RXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define SPIM_RXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_RXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: SPIM_RXD_MAXCNT */
+/* Description: Maximum number of buffer bytes to receive. */
+
+/* Bits 7..0 : Maximum number of buffer bytes to receive. */
+#define SPIM_RXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define SPIM_RXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_RXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: SPIM_RXD_AMOUNT */
+/* Description: Number of bytes received in the last transaction. */
+
+/* Bits 7..0 : Number of bytes received in the last transaction. */
+#define SPIM_RXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
+#define SPIM_RXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_RXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
+
+/* Register: SPIM_TXD_PTR */
+/* Description: Data pointer. */
+
+/* Bits 31..0 : Data pointer. */
+#define SPIM_TXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define SPIM_TXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_TXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: SPIM_TXD_MAXCNT */
+/* Description: Maximum number of buffer bytes to send. */
+
+/* Bits 7..0 : Maximum number of buffer bytes to send. */
+#define SPIM_TXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define SPIM_TXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_TXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: SPIM_TXD_AMOUNT */
+/* Description: Number of bytes sent in the last transaction. */
+
+/* Bits 7..0 : Number of bytes sent in the last transaction. */
+#define SPIM_TXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
+#define SPIM_TXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_TXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
+
+/* Register: SPIM_CONFIG */
+/* Description: Configuration register. */
+
+/* Bit 2 : Serial clock (SCK) polarity. */
+#define SPIM_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */
+#define SPIM_CONFIG_CPOL_Msk (0x1UL << SPIM_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */
+#define SPIM_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */
+#define SPIM_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */
+
+/* Bit 1 : Serial clock (SCK) phase. */
+#define SPIM_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */
+#define SPIM_CONFIG_CPHA_Msk (0x1UL << SPIM_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */
+#define SPIM_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */
+#define SPIM_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */
+
+/* Bit 0 : Bit order. */
+#define SPIM_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */
+#define SPIM_CONFIG_ORDER_Msk (0x1UL << SPIM_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */
+#define SPIM_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */
+#define SPIM_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */
+
+/* Register: SPIM_ORC */
+/* Description: Over-read character. */
+
+/* Bits 7..0 : Over-read character. */
+#define SPIM_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */
+#define SPIM_ORC_ORC_Msk (0xFFUL << SPIM_ORC_ORC_Pos) /*!< Bit mask of ORC field. */
+
+/* Register: SPIM_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define SPIM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define SPIM_POWER_POWER_Msk (0x1UL << SPIM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define SPIM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define SPIM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: SPIS */
+/* Description: SPI slave 1. */
+
+/* Register: SPIS_SHORTS */
+/* Description: Shortcuts for SPIS. */
+
+/* Bit 2 : Shortcut between END event and the ACQUIRE task. */
+#define SPIS_SHORTS_END_ACQUIRE_Pos (2UL) /*!< Position of END_ACQUIRE field. */
+#define SPIS_SHORTS_END_ACQUIRE_Msk (0x1UL << SPIS_SHORTS_END_ACQUIRE_Pos) /*!< Bit mask of END_ACQUIRE field. */
+#define SPIS_SHORTS_END_ACQUIRE_Disabled (0UL) /*!< Shortcut disabled. */
+#define SPIS_SHORTS_END_ACQUIRE_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: SPIS_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 10 : Enable interrupt on ACQUIRED event. */
+#define SPIS_INTENSET_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */
+#define SPIS_INTENSET_ACQUIRED_Msk (0x1UL << SPIS_INTENSET_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */
+#define SPIS_INTENSET_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIS_INTENSET_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIS_INTENSET_ACQUIRED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 4 : enable interrupt on ENDRX event. */
+#define SPIS_INTENSET_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
+#define SPIS_INTENSET_ENDRX_Msk (0x1UL << SPIS_INTENSET_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define SPIS_INTENSET_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIS_INTENSET_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIS_INTENSET_ENDRX_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on END event. */
+#define SPIS_INTENSET_END_Pos (1UL) /*!< Position of END field. */
+#define SPIS_INTENSET_END_Msk (0x1UL << SPIS_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define SPIS_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIS_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIS_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: SPIS_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 10 : Disable interrupt on ACQUIRED event. */
+#define SPIS_INTENCLR_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */
+#define SPIS_INTENCLR_ACQUIRED_Msk (0x1UL << SPIS_INTENCLR_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */
+#define SPIS_INTENCLR_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIS_INTENCLR_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIS_INTENCLR_ACQUIRED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 4 : Disable interrupt on ENDRX event. */
+#define SPIS_INTENCLR_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
+#define SPIS_INTENCLR_ENDRX_Msk (0x1UL << SPIS_INTENCLR_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define SPIS_INTENCLR_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIS_INTENCLR_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIS_INTENCLR_ENDRX_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on END event. */
+#define SPIS_INTENCLR_END_Pos (1UL) /*!< Position of END field. */
+#define SPIS_INTENCLR_END_Msk (0x1UL << SPIS_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define SPIS_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIS_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIS_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: SPIS_SEMSTAT */
+/* Description: Semaphore status. */
+
+/* Bits 1..0 : Semaphore status. */
+#define SPIS_SEMSTAT_SEMSTAT_Pos (0UL) /*!< Position of SEMSTAT field. */
+#define SPIS_SEMSTAT_SEMSTAT_Msk (0x3UL << SPIS_SEMSTAT_SEMSTAT_Pos) /*!< Bit mask of SEMSTAT field. */
+#define SPIS_SEMSTAT_SEMSTAT_Free (0x00UL) /*!< Semaphore is free. */
+#define SPIS_SEMSTAT_SEMSTAT_CPU (0x01UL) /*!< Semaphore is assigned to the CPU. */
+#define SPIS_SEMSTAT_SEMSTAT_SPIS (0x02UL) /*!< Semaphore is assigned to the SPIS. */
+#define SPIS_SEMSTAT_SEMSTAT_CPUPending (0x03UL) /*!< Semaphore is assigned to the SPIS, but a handover to the CPU is pending. */
+
+/* Register: SPIS_STATUS */
+/* Description: Status from last transaction. */
+
+/* Bit 1 : RX buffer overflow detected, and prevented. */
+#define SPIS_STATUS_OVERFLOW_Pos (1UL) /*!< Position of OVERFLOW field. */
+#define SPIS_STATUS_OVERFLOW_Msk (0x1UL << SPIS_STATUS_OVERFLOW_Pos) /*!< Bit mask of OVERFLOW field. */
+#define SPIS_STATUS_OVERFLOW_NotPresent (0UL) /*!< Error not present. */
+#define SPIS_STATUS_OVERFLOW_Present (1UL) /*!< Error present. */
+#define SPIS_STATUS_OVERFLOW_Clear (1UL) /*!< Clear on write. */
+
+/* Bit 0 : TX buffer overread detected, and prevented. */
+#define SPIS_STATUS_OVERREAD_Pos (0UL) /*!< Position of OVERREAD field. */
+#define SPIS_STATUS_OVERREAD_Msk (0x1UL << SPIS_STATUS_OVERREAD_Pos) /*!< Bit mask of OVERREAD field. */
+#define SPIS_STATUS_OVERREAD_NotPresent (0UL) /*!< Error not present. */
+#define SPIS_STATUS_OVERREAD_Present (1UL) /*!< Error present. */
+#define SPIS_STATUS_OVERREAD_Clear (1UL) /*!< Clear on write. */
+
+/* Register: SPIS_ENABLE */
+/* Description: Enable SPIS. */
+
+/* Bits 2..0 : Enable or disable SPIS. */
+#define SPIS_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define SPIS_ENABLE_ENABLE_Msk (0x7UL << SPIS_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define SPIS_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIS. */
+#define SPIS_ENABLE_ENABLE_Enabled (0x02UL) /*!< Enable SPIS. */
+
+/* Register: SPIS_MAXRX */
+/* Description: Maximum number of bytes in the receive buffer. */
+
+/* Bits 7..0 : Maximum number of bytes in the receive buffer. */
+#define SPIS_MAXRX_MAXRX_Pos (0UL) /*!< Position of MAXRX field. */
+#define SPIS_MAXRX_MAXRX_Msk (0xFFUL << SPIS_MAXRX_MAXRX_Pos) /*!< Bit mask of MAXRX field. */
+
+/* Register: SPIS_AMOUNTRX */
+/* Description: Number of bytes received in last granted transaction. */
+
+/* Bits 7..0 : Number of bytes received in last granted transaction. */
+#define SPIS_AMOUNTRX_AMOUNTRX_Pos (0UL) /*!< Position of AMOUNTRX field. */
+#define SPIS_AMOUNTRX_AMOUNTRX_Msk (0xFFUL << SPIS_AMOUNTRX_AMOUNTRX_Pos) /*!< Bit mask of AMOUNTRX field. */
+
+/* Register: SPIS_MAXTX */
+/* Description: Maximum number of bytes in the transmit buffer. */
+
+/* Bits 7..0 : Maximum number of bytes in the transmit buffer. */
+#define SPIS_MAXTX_MAXTX_Pos (0UL) /*!< Position of MAXTX field. */
+#define SPIS_MAXTX_MAXTX_Msk (0xFFUL << SPIS_MAXTX_MAXTX_Pos) /*!< Bit mask of MAXTX field. */
+
+/* Register: SPIS_AMOUNTTX */
+/* Description: Number of bytes transmitted in last granted transaction. */
+
+/* Bits 7..0 : Number of bytes transmitted in last granted transaction. */
+#define SPIS_AMOUNTTX_AMOUNTTX_Pos (0UL) /*!< Position of AMOUNTTX field. */
+#define SPIS_AMOUNTTX_AMOUNTTX_Msk (0xFFUL << SPIS_AMOUNTTX_AMOUNTTX_Pos) /*!< Bit mask of AMOUNTTX field. */
+
+/* Register: SPIS_CONFIG */
+/* Description: Configuration register. */
+
+/* Bit 2 : Serial clock (SCK) polarity. */
+#define SPIS_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */
+#define SPIS_CONFIG_CPOL_Msk (0x1UL << SPIS_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */
+#define SPIS_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */
+#define SPIS_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */
+
+/* Bit 1 : Serial clock (SCK) phase. */
+#define SPIS_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */
+#define SPIS_CONFIG_CPHA_Msk (0x1UL << SPIS_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */
+#define SPIS_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */
+#define SPIS_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */
+
+/* Bit 0 : Bit order. */
+#define SPIS_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */
+#define SPIS_CONFIG_ORDER_Msk (0x1UL << SPIS_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */
+#define SPIS_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */
+#define SPIS_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */
+
+/* Register: SPIS_DEF */
+/* Description: Default character. */
+
+/* Bits 7..0 : Default character. */
+#define SPIS_DEF_DEF_Pos (0UL) /*!< Position of DEF field. */
+#define SPIS_DEF_DEF_Msk (0xFFUL << SPIS_DEF_DEF_Pos) /*!< Bit mask of DEF field. */
+
+/* Register: SPIS_ORC */
+/* Description: Over-read character. */
+
+/* Bits 7..0 : Over-read character. */
+#define SPIS_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */
+#define SPIS_ORC_ORC_Msk (0xFFUL << SPIS_ORC_ORC_Pos) /*!< Bit mask of ORC field. */
+
+/* Register: SPIS_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define SPIS_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define SPIS_POWER_POWER_Msk (0x1UL << SPIS_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define SPIS_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define SPIS_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: TEMP */
+/* Description: Temperature Sensor. */
+
+/* Register: TEMP_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 0 : Enable interrupt on DATARDY event. */
+#define TEMP_INTENSET_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */
+#define TEMP_INTENSET_DATARDY_Msk (0x1UL << TEMP_INTENSET_DATARDY_Pos) /*!< Bit mask of DATARDY field. */
+#define TEMP_INTENSET_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define TEMP_INTENSET_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define TEMP_INTENSET_DATARDY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: TEMP_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 0 : Disable interrupt on DATARDY event. */
+#define TEMP_INTENCLR_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */
+#define TEMP_INTENCLR_DATARDY_Msk (0x1UL << TEMP_INTENCLR_DATARDY_Pos) /*!< Bit mask of DATARDY field. */
+#define TEMP_INTENCLR_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define TEMP_INTENCLR_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define TEMP_INTENCLR_DATARDY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: TEMP_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define TEMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define TEMP_POWER_POWER_Msk (0x1UL << TEMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define TEMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define TEMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: TIMER */
+/* Description: Timer 0. */
+
+/* Register: TIMER_SHORTS */
+/* Description: Shortcuts for Timer. */
+
+/* Bit 11 : Shortcut between CC[3] event and the STOP task. */
+#define TIMER_SHORTS_COMPARE3_STOP_Pos (11UL) /*!< Position of COMPARE3_STOP field. */
+#define TIMER_SHORTS_COMPARE3_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE3_STOP_Pos) /*!< Bit mask of COMPARE3_STOP field. */
+#define TIMER_SHORTS_COMPARE3_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE3_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 10 : Shortcut between CC[2] event and the STOP task. */
+#define TIMER_SHORTS_COMPARE2_STOP_Pos (10UL) /*!< Position of COMPARE2_STOP field. */
+#define TIMER_SHORTS_COMPARE2_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE2_STOP_Pos) /*!< Bit mask of COMPARE2_STOP field. */
+#define TIMER_SHORTS_COMPARE2_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE2_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 9 : Shortcut between CC[1] event and the STOP task. */
+#define TIMER_SHORTS_COMPARE1_STOP_Pos (9UL) /*!< Position of COMPARE1_STOP field. */
+#define TIMER_SHORTS_COMPARE1_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE1_STOP_Pos) /*!< Bit mask of COMPARE1_STOP field. */
+#define TIMER_SHORTS_COMPARE1_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE1_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 8 : Shortcut between CC[0] event and the STOP task. */
+#define TIMER_SHORTS_COMPARE0_STOP_Pos (8UL) /*!< Position of COMPARE0_STOP field. */
+#define TIMER_SHORTS_COMPARE0_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE0_STOP_Pos) /*!< Bit mask of COMPARE0_STOP field. */
+#define TIMER_SHORTS_COMPARE0_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE0_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 3 : Shortcut between CC[3] event and the CLEAR task. */
+#define TIMER_SHORTS_COMPARE3_CLEAR_Pos (3UL) /*!< Position of COMPARE3_CLEAR field. */
+#define TIMER_SHORTS_COMPARE3_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE3_CLEAR_Pos) /*!< Bit mask of COMPARE3_CLEAR field. */
+#define TIMER_SHORTS_COMPARE3_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE3_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 2 : Shortcut between CC[2] event and the CLEAR task. */
+#define TIMER_SHORTS_COMPARE2_CLEAR_Pos (2UL) /*!< Position of COMPARE2_CLEAR field. */
+#define TIMER_SHORTS_COMPARE2_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE2_CLEAR_Pos) /*!< Bit mask of COMPARE2_CLEAR field. */
+#define TIMER_SHORTS_COMPARE2_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE2_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 1 : Shortcut between CC[1] event and the CLEAR task. */
+#define TIMER_SHORTS_COMPARE1_CLEAR_Pos (1UL) /*!< Position of COMPARE1_CLEAR field. */
+#define TIMER_SHORTS_COMPARE1_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE1_CLEAR_Pos) /*!< Bit mask of COMPARE1_CLEAR field. */
+#define TIMER_SHORTS_COMPARE1_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE1_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 0 : Shortcut between CC[0] event and the CLEAR task. */
+#define TIMER_SHORTS_COMPARE0_CLEAR_Pos (0UL) /*!< Position of COMPARE0_CLEAR field. */
+#define TIMER_SHORTS_COMPARE0_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE0_CLEAR_Pos) /*!< Bit mask of COMPARE0_CLEAR field. */
+#define TIMER_SHORTS_COMPARE0_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE0_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: TIMER_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 19 : Enable interrupt on COMPARE[3] */
+#define TIMER_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define TIMER_INTENSET_COMPARE3_Msk (0x1UL << TIMER_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define TIMER_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 18 : Enable interrupt on COMPARE[2] */
+#define TIMER_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define TIMER_INTENSET_COMPARE2_Msk (0x1UL << TIMER_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define TIMER_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 17 : Enable interrupt on COMPARE[1] */
+#define TIMER_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define TIMER_INTENSET_COMPARE1_Msk (0x1UL << TIMER_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define TIMER_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 16 : Enable interrupt on COMPARE[0] */
+#define TIMER_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define TIMER_INTENSET_COMPARE0_Msk (0x1UL << TIMER_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define TIMER_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: TIMER_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 19 : Disable interrupt on COMPARE[3] */
+#define TIMER_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define TIMER_INTENCLR_COMPARE3_Msk (0x1UL << TIMER_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define TIMER_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 18 : Disable interrupt on COMPARE[2] */
+#define TIMER_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define TIMER_INTENCLR_COMPARE2_Msk (0x1UL << TIMER_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define TIMER_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 17 : Disable interrupt on COMPARE[1] */
+#define TIMER_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define TIMER_INTENCLR_COMPARE1_Msk (0x1UL << TIMER_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define TIMER_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 16 : Disable interrupt on COMPARE[0] */
+#define TIMER_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define TIMER_INTENCLR_COMPARE0_Msk (0x1UL << TIMER_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define TIMER_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: TIMER_MODE */
+/* Description: Timer Mode selection. */
+
+/* Bit 0 : Select Normal or Counter mode. */
+#define TIMER_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */
+#define TIMER_MODE_MODE_Msk (0x1UL << TIMER_MODE_MODE_Pos) /*!< Bit mask of MODE field. */
+#define TIMER_MODE_MODE_Timer (0UL) /*!< Timer in Normal mode. */
+#define TIMER_MODE_MODE_Counter (1UL) /*!< Timer in Counter mode. */
+
+/* Register: TIMER_BITMODE */
+/* Description: Sets timer behaviour. */
+
+/* Bits 1..0 : Sets timer behaviour ro be like the implementation of a timer with width as indicated. */
+#define TIMER_BITMODE_BITMODE_Pos (0UL) /*!< Position of BITMODE field. */
+#define TIMER_BITMODE_BITMODE_Msk (0x3UL << TIMER_BITMODE_BITMODE_Pos) /*!< Bit mask of BITMODE field. */
+#define TIMER_BITMODE_BITMODE_16Bit (0x00UL) /*!< 16-bit timer behaviour. */
+#define TIMER_BITMODE_BITMODE_08Bit (0x01UL) /*!< 8-bit timer behaviour. */
+#define TIMER_BITMODE_BITMODE_24Bit (0x02UL) /*!< 24-bit timer behaviour. */
+#define TIMER_BITMODE_BITMODE_32Bit (0x03UL) /*!< 32-bit timer behaviour. */
+
+/* Register: TIMER_PRESCALER */
+/* Description: 4-bit prescaler to source clock frequency (max value 9). Source clock frequency is divided by 2^SCALE. */
+
+/* Bits 3..0 : Timer PRESCALER value. Max value is 9. */
+#define TIMER_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */
+#define TIMER_PRESCALER_PRESCALER_Msk (0xFUL << TIMER_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */
+
+/* Register: TIMER_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define TIMER_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define TIMER_POWER_POWER_Msk (0x1UL << TIMER_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define TIMER_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define TIMER_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: TWI */
+/* Description: Two-wire interface master 0. */
+
+/* Register: TWI_SHORTS */
+/* Description: Shortcuts for TWI. */
+
+/* Bit 1 : Shortcut between BB event and the STOP task. */
+#define TWI_SHORTS_BB_STOP_Pos (1UL) /*!< Position of BB_STOP field. */
+#define TWI_SHORTS_BB_STOP_Msk (0x1UL << TWI_SHORTS_BB_STOP_Pos) /*!< Bit mask of BB_STOP field. */
+#define TWI_SHORTS_BB_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define TWI_SHORTS_BB_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 0 : Shortcut between BB event and the SUSPEND task. */
+#define TWI_SHORTS_BB_SUSPEND_Pos (0UL) /*!< Position of BB_SUSPEND field. */
+#define TWI_SHORTS_BB_SUSPEND_Msk (0x1UL << TWI_SHORTS_BB_SUSPEND_Pos) /*!< Bit mask of BB_SUSPEND field. */
+#define TWI_SHORTS_BB_SUSPEND_Disabled (0UL) /*!< Shortcut disabled. */
+#define TWI_SHORTS_BB_SUSPEND_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: TWI_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 18 : Enable interrupt on SUSPENDED event. */
+#define TWI_INTENSET_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */
+#define TWI_INTENSET_SUSPENDED_Msk (0x1UL << TWI_INTENSET_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */
+#define TWI_INTENSET_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENSET_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENSET_SUSPENDED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 14 : Enable interrupt on BB event. */
+#define TWI_INTENSET_BB_Pos (14UL) /*!< Position of BB field. */
+#define TWI_INTENSET_BB_Msk (0x1UL << TWI_INTENSET_BB_Pos) /*!< Bit mask of BB field. */
+#define TWI_INTENSET_BB_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENSET_BB_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENSET_BB_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 9 : Enable interrupt on ERROR event. */
+#define TWI_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define TWI_INTENSET_ERROR_Msk (0x1UL << TWI_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define TWI_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 7 : Enable interrupt on TXDSENT event. */
+#define TWI_INTENSET_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */
+#define TWI_INTENSET_TXDSENT_Msk (0x1UL << TWI_INTENSET_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */
+#define TWI_INTENSET_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENSET_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENSET_TXDSENT_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 2 : Enable interrupt on READY event. */
+#define TWI_INTENSET_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */
+#define TWI_INTENSET_RXDREADY_Msk (0x1UL << TWI_INTENSET_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */
+#define TWI_INTENSET_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENSET_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENSET_RXDREADY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on STOPPED event. */
+#define TWI_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define TWI_INTENSET_STOPPED_Msk (0x1UL << TWI_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define TWI_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: TWI_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 18 : Disable interrupt on SUSPENDED event. */
+#define TWI_INTENCLR_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */
+#define TWI_INTENCLR_SUSPENDED_Msk (0x1UL << TWI_INTENCLR_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */
+#define TWI_INTENCLR_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENCLR_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENCLR_SUSPENDED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 14 : Disable interrupt on BB event. */
+#define TWI_INTENCLR_BB_Pos (14UL) /*!< Position of BB field. */
+#define TWI_INTENCLR_BB_Msk (0x1UL << TWI_INTENCLR_BB_Pos) /*!< Bit mask of BB field. */
+#define TWI_INTENCLR_BB_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENCLR_BB_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENCLR_BB_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 9 : Disable interrupt on ERROR event. */
+#define TWI_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define TWI_INTENCLR_ERROR_Msk (0x1UL << TWI_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define TWI_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 7 : Disable interrupt on TXDSENT event. */
+#define TWI_INTENCLR_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */
+#define TWI_INTENCLR_TXDSENT_Msk (0x1UL << TWI_INTENCLR_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */
+#define TWI_INTENCLR_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENCLR_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENCLR_TXDSENT_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 2 : Disable interrupt on RXDREADY event. */
+#define TWI_INTENCLR_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */
+#define TWI_INTENCLR_RXDREADY_Msk (0x1UL << TWI_INTENCLR_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */
+#define TWI_INTENCLR_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENCLR_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENCLR_RXDREADY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on STOPPED event. */
+#define TWI_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define TWI_INTENCLR_STOPPED_Msk (0x1UL << TWI_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define TWI_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: TWI_ERRORSRC */
+/* Description: Two-wire error source. Write error field to 1 to clear error. */
+
+/* Bit 2 : NACK received after sending a data byte. */
+#define TWI_ERRORSRC_DNACK_Pos (2UL) /*!< Position of DNACK field. */
+#define TWI_ERRORSRC_DNACK_Msk (0x1UL << TWI_ERRORSRC_DNACK_Pos) /*!< Bit mask of DNACK field. */
+#define TWI_ERRORSRC_DNACK_NotPresent (0UL) /*!< Error not present. */
+#define TWI_ERRORSRC_DNACK_Present (1UL) /*!< Error present. */
+#define TWI_ERRORSRC_DNACK_Clear (1UL) /*!< Clear error on write. */
+
+/* Bit 1 : NACK received after sending the address. */
+#define TWI_ERRORSRC_ANACK_Pos (1UL) /*!< Position of ANACK field. */
+#define TWI_ERRORSRC_ANACK_Msk (0x1UL << TWI_ERRORSRC_ANACK_Pos) /*!< Bit mask of ANACK field. */
+#define TWI_ERRORSRC_ANACK_NotPresent (0UL) /*!< Error not present. */
+#define TWI_ERRORSRC_ANACK_Present (1UL) /*!< Error present. */
+#define TWI_ERRORSRC_ANACK_Clear (1UL) /*!< Clear error on write. */
+
+/* Bit 0 : Byte received in RXD register before read of the last received byte (data loss). */
+#define TWI_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */
+#define TWI_ERRORSRC_OVERRUN_Msk (0x1UL << TWI_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */
+#define TWI_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */
+#define TWI_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */
+#define TWI_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */
+
+/* Register: TWI_ENABLE */
+/* Description: Enable two-wire master. */
+
+/* Bits 2..0 : Enable or disable W2M */
+#define TWI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define TWI_ENABLE_ENABLE_Msk (0x7UL << TWI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define TWI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled. */
+#define TWI_ENABLE_ENABLE_Enabled (0x05UL) /*!< Enabled. */
+
+/* Register: TWI_RXD */
+/* Description: RX data register. */
+
+/* Bits 7..0 : RX data from last transfer. */
+#define TWI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */
+#define TWI_RXD_RXD_Msk (0xFFUL << TWI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */
+
+/* Register: TWI_TXD */
+/* Description: TX data register. */
+
+/* Bits 7..0 : TX data for next transfer. */
+#define TWI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */
+#define TWI_TXD_TXD_Msk (0xFFUL << TWI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */
+
+/* Register: TWI_FREQUENCY */
+/* Description: Two-wire frequency. */
+
+/* Bits 31..0 : Two-wire master clock frequency. */
+#define TWI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
+#define TWI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << TWI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
+#define TWI_FREQUENCY_FREQUENCY_K100 (0x01980000UL) /*!< 100 kbps. */
+#define TWI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */
+#define TWI_FREQUENCY_FREQUENCY_K400 (0x06680000UL) /*!< 400 kbps. */
+
+/* Register: TWI_ADDRESS */
+/* Description: Address used in the two-wire transfer. */
+
+/* Bits 6..0 : Two-wire address. */
+#define TWI_ADDRESS_ADDRESS_Pos (0UL) /*!< Position of ADDRESS field. */
+#define TWI_ADDRESS_ADDRESS_Msk (0x7FUL << TWI_ADDRESS_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */
+
+/* Register: TWI_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define TWI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define TWI_POWER_POWER_Msk (0x1UL << TWI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define TWI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define TWI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: UART */
+/* Description: Universal Asynchronous Receiver/Transmitter. */
+
+/* Register: UART_SHORTS */
+/* Description: Shortcuts for UART. */
+
+/* Bit 4 : Shortcut between NCTS event and STOPRX task. */
+#define UART_SHORTS_NCTS_STOPRX_Pos (4UL) /*!< Position of NCTS_STOPRX field. */
+#define UART_SHORTS_NCTS_STOPRX_Msk (0x1UL << UART_SHORTS_NCTS_STOPRX_Pos) /*!< Bit mask of NCTS_STOPRX field. */
+#define UART_SHORTS_NCTS_STOPRX_Disabled (0UL) /*!< Shortcut disabled. */
+#define UART_SHORTS_NCTS_STOPRX_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 3 : Shortcut between CTS event and STARTRX task. */
+#define UART_SHORTS_CTS_STARTRX_Pos (3UL) /*!< Position of CTS_STARTRX field. */
+#define UART_SHORTS_CTS_STARTRX_Msk (0x1UL << UART_SHORTS_CTS_STARTRX_Pos) /*!< Bit mask of CTS_STARTRX field. */
+#define UART_SHORTS_CTS_STARTRX_Disabled (0UL) /*!< Shortcut disabled. */
+#define UART_SHORTS_CTS_STARTRX_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: UART_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 17 : Enable interrupt on RXTO event. */
+#define UART_INTENSET_RXTO_Pos (17UL) /*!< Position of RXTO field. */
+#define UART_INTENSET_RXTO_Msk (0x1UL << UART_INTENSET_RXTO_Pos) /*!< Bit mask of RXTO field. */
+#define UART_INTENSET_RXTO_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENSET_RXTO_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENSET_RXTO_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 9 : Enable interrupt on ERROR event. */
+#define UART_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define UART_INTENSET_ERROR_Msk (0x1UL << UART_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define UART_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 7 : Enable interrupt on TXRDY event. */
+#define UART_INTENSET_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */
+#define UART_INTENSET_TXDRDY_Msk (0x1UL << UART_INTENSET_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */
+#define UART_INTENSET_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENSET_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENSET_TXDRDY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 2 : Enable interrupt on RXRDY event. */
+#define UART_INTENSET_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */
+#define UART_INTENSET_RXDRDY_Msk (0x1UL << UART_INTENSET_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */
+#define UART_INTENSET_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENSET_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENSET_RXDRDY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on NCTS event. */
+#define UART_INTENSET_NCTS_Pos (1UL) /*!< Position of NCTS field. */
+#define UART_INTENSET_NCTS_Msk (0x1UL << UART_INTENSET_NCTS_Pos) /*!< Bit mask of NCTS field. */
+#define UART_INTENSET_NCTS_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENSET_NCTS_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENSET_NCTS_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on CTS event. */
+#define UART_INTENSET_CTS_Pos (0UL) /*!< Position of CTS field. */
+#define UART_INTENSET_CTS_Msk (0x1UL << UART_INTENSET_CTS_Pos) /*!< Bit mask of CTS field. */
+#define UART_INTENSET_CTS_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENSET_CTS_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENSET_CTS_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: UART_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 17 : Disable interrupt on RXTO event. */
+#define UART_INTENCLR_RXTO_Pos (17UL) /*!< Position of RXTO field. */
+#define UART_INTENCLR_RXTO_Msk (0x1UL << UART_INTENCLR_RXTO_Pos) /*!< Bit mask of RXTO field. */
+#define UART_INTENCLR_RXTO_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENCLR_RXTO_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENCLR_RXTO_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 9 : Disable interrupt on ERROR event. */
+#define UART_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define UART_INTENCLR_ERROR_Msk (0x1UL << UART_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define UART_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 7 : Disable interrupt on TXRDY event. */
+#define UART_INTENCLR_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */
+#define UART_INTENCLR_TXDRDY_Msk (0x1UL << UART_INTENCLR_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */
+#define UART_INTENCLR_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENCLR_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENCLR_TXDRDY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 2 : Disable interrupt on RXRDY event. */
+#define UART_INTENCLR_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */
+#define UART_INTENCLR_RXDRDY_Msk (0x1UL << UART_INTENCLR_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */
+#define UART_INTENCLR_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENCLR_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENCLR_RXDRDY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on NCTS event. */
+#define UART_INTENCLR_NCTS_Pos (1UL) /*!< Position of NCTS field. */
+#define UART_INTENCLR_NCTS_Msk (0x1UL << UART_INTENCLR_NCTS_Pos) /*!< Bit mask of NCTS field. */
+#define UART_INTENCLR_NCTS_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENCLR_NCTS_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENCLR_NCTS_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on CTS event. */
+#define UART_INTENCLR_CTS_Pos (0UL) /*!< Position of CTS field. */
+#define UART_INTENCLR_CTS_Msk (0x1UL << UART_INTENCLR_CTS_Pos) /*!< Bit mask of CTS field. */
+#define UART_INTENCLR_CTS_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENCLR_CTS_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENCLR_CTS_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: UART_ERRORSRC */
+/* Description: Error source. Write error field to 1 to clear error. */
+
+/* Bit 3 : The serial data input is '0' for longer than the length of a data frame. */
+#define UART_ERRORSRC_BREAK_Pos (3UL) /*!< Position of BREAK field. */
+#define UART_ERRORSRC_BREAK_Msk (0x1UL << UART_ERRORSRC_BREAK_Pos) /*!< Bit mask of BREAK field. */
+#define UART_ERRORSRC_BREAK_NotPresent (0UL) /*!< Error not present. */
+#define UART_ERRORSRC_BREAK_Present (1UL) /*!< Error present. */
+#define UART_ERRORSRC_BREAK_Clear (1UL) /*!< Clear error on write. */
+
+/* Bit 2 : A valid stop bit is not detected on the serial data input after all bits in a character have been received. */
+#define UART_ERRORSRC_FRAMING_Pos (2UL) /*!< Position of FRAMING field. */
+#define UART_ERRORSRC_FRAMING_Msk (0x1UL << UART_ERRORSRC_FRAMING_Pos) /*!< Bit mask of FRAMING field. */
+#define UART_ERRORSRC_FRAMING_NotPresent (0UL) /*!< Error not present. */
+#define UART_ERRORSRC_FRAMING_Present (1UL) /*!< Error present. */
+#define UART_ERRORSRC_FRAMING_Clear (1UL) /*!< Clear error on write. */
+
+/* Bit 1 : A character with bad parity is received. Only checked if HW parity control is enabled. */
+#define UART_ERRORSRC_PARITY_Pos (1UL) /*!< Position of PARITY field. */
+#define UART_ERRORSRC_PARITY_Msk (0x1UL << UART_ERRORSRC_PARITY_Pos) /*!< Bit mask of PARITY field. */
+#define UART_ERRORSRC_PARITY_NotPresent (0UL) /*!< Error not present. */
+#define UART_ERRORSRC_PARITY_Present (1UL) /*!< Error present. */
+#define UART_ERRORSRC_PARITY_Clear (1UL) /*!< Clear error on write. */
+
+/* Bit 0 : A start bit is received while the previous data still lies in RXD. (Data loss). */
+#define UART_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */
+#define UART_ERRORSRC_OVERRUN_Msk (0x1UL << UART_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */
+#define UART_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */
+#define UART_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */
+#define UART_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */
+
+/* Register: UART_ENABLE */
+/* Description: Enable UART and acquire IOs. */
+
+/* Bits 2..0 : Enable or disable UART and acquire IOs. */
+#define UART_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define UART_ENABLE_ENABLE_Msk (0x7UL << UART_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define UART_ENABLE_ENABLE_Disabled (0x00UL) /*!< UART disabled. */
+#define UART_ENABLE_ENABLE_Enabled (0x04UL) /*!< UART enabled. */
+
+/* Register: UART_RXD */
+/* Description: RXD register. On read action the buffer pointer is displaced. Once read the character is consumed. If read when no character available, the UART will stop working. */
+
+/* Bits 7..0 : RX data from previous transfer. Double buffered. */
+#define UART_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */
+#define UART_RXD_RXD_Msk (0xFFUL << UART_RXD_RXD_Pos) /*!< Bit mask of RXD field. */
+
+/* Register: UART_TXD */
+/* Description: TXD register. */
+
+/* Bits 7..0 : TX data for transfer. */
+#define UART_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */
+#define UART_TXD_TXD_Msk (0xFFUL << UART_TXD_TXD_Pos) /*!< Bit mask of TXD field. */
+
+/* Register: UART_BAUDRATE */
+/* Description: UART Baudrate. */
+
+/* Bits 31..0 : UART baudrate. */
+#define UART_BAUDRATE_BAUDRATE_Pos (0UL) /*!< Position of BAUDRATE field. */
+#define UART_BAUDRATE_BAUDRATE_Msk (0xFFFFFFFFUL << UART_BAUDRATE_BAUDRATE_Pos) /*!< Bit mask of BAUDRATE field. */
+#define UART_BAUDRATE_BAUDRATE_Baud1200 (0x0004F000UL) /*!< 1200 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud2400 (0x0009D000UL) /*!< 2400 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud4800 (0x0013B000UL) /*!< 4800 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud9600 (0x00275000UL) /*!< 9600 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud14400 (0x003B0000UL) /*!< 14400 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud19200 (0x004EA000UL) /*!< 19200 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud28800 (0x0075F000UL) /*!< 28800 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud38400 (0x009D5000UL) /*!< 38400 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud57600 (0x00EBF000UL) /*!< 57600 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud76800 (0x013A9000UL) /*!< 76800 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud115200 (0x01D7E000UL) /*!< 115200 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud230400 (0x03AFB000UL) /*!< 230400 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud250000 (0x04000000UL) /*!< 250000 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud460800 (0x075F7000UL) /*!< 460800 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud921600 (0x0EBED000UL) /*!< 921600 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud1M (0x10000000UL) /*!< 1M baud. */
+
+/* Register: UART_CONFIG */
+/* Description: Configuration of parity and hardware flow control register. */
+
+/* Bits 3..1 : Include parity bit. */
+#define UART_CONFIG_PARITY_Pos (1UL) /*!< Position of PARITY field. */
+#define UART_CONFIG_PARITY_Msk (0x7UL << UART_CONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */
+#define UART_CONFIG_PARITY_Excluded (0UL) /*!< Parity bit excluded. */
+#define UART_CONFIG_PARITY_Included (7UL) /*!< Parity bit included. */
+
+/* Bit 0 : Hardware flow control. */
+#define UART_CONFIG_HWFC_Pos (0UL) /*!< Position of HWFC field. */
+#define UART_CONFIG_HWFC_Msk (0x1UL << UART_CONFIG_HWFC_Pos) /*!< Bit mask of HWFC field. */
+#define UART_CONFIG_HWFC_Disabled (0UL) /*!< Hardware flow control disabled. */
+#define UART_CONFIG_HWFC_Enabled (1UL) /*!< Hardware flow control enabled. */
+
+/* Register: UART_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define UART_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define UART_POWER_POWER_Msk (0x1UL << UART_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define UART_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define UART_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: UICR */
+/* Description: User Information Configuration. */
+
+/* Register: UICR_RBPCONF */
+/* Description: Readback protection configuration. */
+
+/* Bits 15..8 : Readback protect all code in the device. */
+#define UICR_RBPCONF_PALL_Pos (8UL) /*!< Position of PALL field. */
+#define UICR_RBPCONF_PALL_Msk (0xFFUL << UICR_RBPCONF_PALL_Pos) /*!< Bit mask of PALL field. */
+#define UICR_RBPCONF_PALL_Enabled (0x00UL) /*!< Enabled. */
+#define UICR_RBPCONF_PALL_Disabled (0xFFUL) /*!< Disabled. */
+
+/* Bits 7..0 : Readback protect region 0. Will be ignored if pre-programmed factory code is present on the chip. */
+#define UICR_RBPCONF_PR0_Pos (0UL) /*!< Position of PR0 field. */
+#define UICR_RBPCONF_PR0_Msk (0xFFUL << UICR_RBPCONF_PR0_Pos) /*!< Bit mask of PR0 field. */
+#define UICR_RBPCONF_PR0_Enabled (0x00UL) /*!< Enabled. */
+#define UICR_RBPCONF_PR0_Disabled (0xFFUL) /*!< Disabled. */
+
+/* Register: UICR_XTALFREQ */
+/* Description: Reset value for CLOCK XTALFREQ register. */
+
+/* Bits 7..0 : Reset value for CLOCK XTALFREQ register. */
+#define UICR_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */
+#define UICR_XTALFREQ_XTALFREQ_Msk (0xFFUL << UICR_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */
+#define UICR_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz Xtal is used. */
+#define UICR_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz Xtal is used. */
+
+/* Register: UICR_FWID */
+/* Description: Firmware ID. */
+
+/* Bits 15..0 : Identification number for the firmware loaded into the chip. */
+#define UICR_FWID_FWID_Pos (0UL) /*!< Position of FWID field. */
+#define UICR_FWID_FWID_Msk (0xFFFFUL << UICR_FWID_FWID_Pos) /*!< Bit mask of FWID field. */
+
+
+/* Peripheral: WDT */
+/* Description: Watchdog Timer. */
+
+/* Register: WDT_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 0 : Enable interrupt on TIMEOUT event. */
+#define WDT_INTENSET_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */
+#define WDT_INTENSET_TIMEOUT_Msk (0x1UL << WDT_INTENSET_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */
+#define WDT_INTENSET_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */
+#define WDT_INTENSET_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */
+#define WDT_INTENSET_TIMEOUT_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: WDT_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 0 : Disable interrupt on TIMEOUT event. */
+#define WDT_INTENCLR_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */
+#define WDT_INTENCLR_TIMEOUT_Msk (0x1UL << WDT_INTENCLR_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */
+#define WDT_INTENCLR_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */
+#define WDT_INTENCLR_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */
+#define WDT_INTENCLR_TIMEOUT_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: WDT_RUNSTATUS */
+/* Description: Watchdog running status. */
+
+/* Bit 0 : Watchdog running status. */
+#define WDT_RUNSTATUS_RUNSTATUS_Pos (0UL) /*!< Position of RUNSTATUS field. */
+#define WDT_RUNSTATUS_RUNSTATUS_Msk (0x1UL << WDT_RUNSTATUS_RUNSTATUS_Pos) /*!< Bit mask of RUNSTATUS field. */
+#define WDT_RUNSTATUS_RUNSTATUS_NotRunning (0UL) /*!< Watchdog timer is not running. */
+#define WDT_RUNSTATUS_RUNSTATUS_Running (1UL) /*!< Watchdog timer is running. */
+
+/* Register: WDT_REQSTATUS */
+/* Description: Request status. */
+
+/* Bit 7 : Request status for RR[7]. */
+#define WDT_REQSTATUS_RR7_Pos (7UL) /*!< Position of RR7 field. */
+#define WDT_REQSTATUS_RR7_Msk (0x1UL << WDT_REQSTATUS_RR7_Pos) /*!< Bit mask of RR7 field. */
+#define WDT_REQSTATUS_RR7_DisabledOrRequested (0UL) /*!< RR[7] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR7_EnabledAndUnrequested (1UL) /*!< RR[7] register is enabled and has not jet requested. */
+
+/* Bit 6 : Request status for RR[6]. */
+#define WDT_REQSTATUS_RR6_Pos (6UL) /*!< Position of RR6 field. */
+#define WDT_REQSTATUS_RR6_Msk (0x1UL << WDT_REQSTATUS_RR6_Pos) /*!< Bit mask of RR6 field. */
+#define WDT_REQSTATUS_RR6_DisabledOrRequested (0UL) /*!< RR[6] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR6_EnabledAndUnrequested (1UL) /*!< RR[6] register is enabled and has not jet requested. */
+
+/* Bit 5 : Request status for RR[5]. */
+#define WDT_REQSTATUS_RR5_Pos (5UL) /*!< Position of RR5 field. */
+#define WDT_REQSTATUS_RR5_Msk (0x1UL << WDT_REQSTATUS_RR5_Pos) /*!< Bit mask of RR5 field. */
+#define WDT_REQSTATUS_RR5_DisabledOrRequested (0UL) /*!< RR[5] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR5_EnabledAndUnrequested (1UL) /*!< RR[5] register is enabled and has not jet requested. */
+
+/* Bit 4 : Request status for RR[4]. */
+#define WDT_REQSTATUS_RR4_Pos (4UL) /*!< Position of RR4 field. */
+#define WDT_REQSTATUS_RR4_Msk (0x1UL << WDT_REQSTATUS_RR4_Pos) /*!< Bit mask of RR4 field. */
+#define WDT_REQSTATUS_RR4_DisabledOrRequested (0UL) /*!< RR[4] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR4_EnabledAndUnrequested (1UL) /*!< RR[4] register is enabled and has not jet requested. */
+
+/* Bit 3 : Request status for RR[3]. */
+#define WDT_REQSTATUS_RR3_Pos (3UL) /*!< Position of RR3 field. */
+#define WDT_REQSTATUS_RR3_Msk (0x1UL << WDT_REQSTATUS_RR3_Pos) /*!< Bit mask of RR3 field. */
+#define WDT_REQSTATUS_RR3_DisabledOrRequested (0UL) /*!< RR[3] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR3_EnabledAndUnrequested (1UL) /*!< RR[3] register is enabled and has not jet requested. */
+
+/* Bit 2 : Request status for RR[2]. */
+#define WDT_REQSTATUS_RR2_Pos (2UL) /*!< Position of RR2 field. */
+#define WDT_REQSTATUS_RR2_Msk (0x1UL << WDT_REQSTATUS_RR2_Pos) /*!< Bit mask of RR2 field. */
+#define WDT_REQSTATUS_RR2_DisabledOrRequested (0UL) /*!< RR[2] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR2_EnabledAndUnrequested (1UL) /*!< RR[2] register is enabled and has not jet requested. */
+
+/* Bit 1 : Request status for RR[1]. */
+#define WDT_REQSTATUS_RR1_Pos (1UL) /*!< Position of RR1 field. */
+#define WDT_REQSTATUS_RR1_Msk (0x1UL << WDT_REQSTATUS_RR1_Pos) /*!< Bit mask of RR1 field. */
+#define WDT_REQSTATUS_RR1_DisabledOrRequested (0UL) /*!< RR[1] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR1_EnabledAndUnrequested (1UL) /*!< RR[1] register is enabled and has not jet requested. */
+
+/* Bit 0 : Request status for RR[0]. */
+#define WDT_REQSTATUS_RR0_Pos (0UL) /*!< Position of RR0 field. */
+#define WDT_REQSTATUS_RR0_Msk (0x1UL << WDT_REQSTATUS_RR0_Pos) /*!< Bit mask of RR0 field. */
+#define WDT_REQSTATUS_RR0_DisabledOrRequested (0UL) /*!< RR[0] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR0_EnabledAndUnrequested (1UL) /*!< RR[0] register is enabled and has not jet requested. */
+
+/* Register: WDT_RREN */
+/* Description: Reload request enable. */
+
+/* Bit 7 : Enable or disable RR[7] register. */
+#define WDT_RREN_RR7_Pos (7UL) /*!< Position of RR7 field. */
+#define WDT_RREN_RR7_Msk (0x1UL << WDT_RREN_RR7_Pos) /*!< Bit mask of RR7 field. */
+#define WDT_RREN_RR7_Disabled (0UL) /*!< RR[7] register is disabled. */
+#define WDT_RREN_RR7_Enabled (1UL) /*!< RR[7] register is enabled. */
+
+/* Bit 6 : Enable or disable RR[6] register. */
+#define WDT_RREN_RR6_Pos (6UL) /*!< Position of RR6 field. */
+#define WDT_RREN_RR6_Msk (0x1UL << WDT_RREN_RR6_Pos) /*!< Bit mask of RR6 field. */
+#define WDT_RREN_RR6_Disabled (0UL) /*!< RR[6] register is disabled. */
+#define WDT_RREN_RR6_Enabled (1UL) /*!< RR[6] register is enabled. */
+
+/* Bit 5 : Enable or disable RR[5] register. */
+#define WDT_RREN_RR5_Pos (5UL) /*!< Position of RR5 field. */
+#define WDT_RREN_RR5_Msk (0x1UL << WDT_RREN_RR5_Pos) /*!< Bit mask of RR5 field. */
+#define WDT_RREN_RR5_Disabled (0UL) /*!< RR[5] register is disabled. */
+#define WDT_RREN_RR5_Enabled (1UL) /*!< RR[5] register is enabled. */
+
+/* Bit 4 : Enable or disable RR[4] register. */
+#define WDT_RREN_RR4_Pos (4UL) /*!< Position of RR4 field. */
+#define WDT_RREN_RR4_Msk (0x1UL << WDT_RREN_RR4_Pos) /*!< Bit mask of RR4 field. */
+#define WDT_RREN_RR4_Disabled (0UL) /*!< RR[4] register is disabled. */
+#define WDT_RREN_RR4_Enabled (1UL) /*!< RR[4] register is enabled. */
+
+/* Bit 3 : Enable or disable RR[3] register. */
+#define WDT_RREN_RR3_Pos (3UL) /*!< Position of RR3 field. */
+#define WDT_RREN_RR3_Msk (0x1UL << WDT_RREN_RR3_Pos) /*!< Bit mask of RR3 field. */
+#define WDT_RREN_RR3_Disabled (0UL) /*!< RR[3] register is disabled. */
+#define WDT_RREN_RR3_Enabled (1UL) /*!< RR[3] register is enabled. */
+
+/* Bit 2 : Enable or disable RR[2] register. */
+#define WDT_RREN_RR2_Pos (2UL) /*!< Position of RR2 field. */
+#define WDT_RREN_RR2_Msk (0x1UL << WDT_RREN_RR2_Pos) /*!< Bit mask of RR2 field. */
+#define WDT_RREN_RR2_Disabled (0UL) /*!< RR[2] register is disabled. */
+#define WDT_RREN_RR2_Enabled (1UL) /*!< RR[2] register is enabled. */
+
+/* Bit 1 : Enable or disable RR[1] register. */
+#define WDT_RREN_RR1_Pos (1UL) /*!< Position of RR1 field. */
+#define WDT_RREN_RR1_Msk (0x1UL << WDT_RREN_RR1_Pos) /*!< Bit mask of RR1 field. */
+#define WDT_RREN_RR1_Disabled (0UL) /*!< RR[1] register is disabled. */
+#define WDT_RREN_RR1_Enabled (1UL) /*!< RR[1] register is enabled. */
+
+/* Bit 0 : Enable or disable RR[0] register. */
+#define WDT_RREN_RR0_Pos (0UL) /*!< Position of RR0 field. */
+#define WDT_RREN_RR0_Msk (0x1UL << WDT_RREN_RR0_Pos) /*!< Bit mask of RR0 field. */
+#define WDT_RREN_RR0_Disabled (0UL) /*!< RR[0] register is disabled. */
+#define WDT_RREN_RR0_Enabled (1UL) /*!< RR[0] register is enabled. */
+
+/* Register: WDT_CONFIG */
+/* Description: Configuration register. */
+
+/* Bit 3 : Configure the watchdog to pause or not while the CPU is halted by the debugger. */
+#define WDT_CONFIG_HALT_Pos (3UL) /*!< Position of HALT field. */
+#define WDT_CONFIG_HALT_Msk (0x1UL << WDT_CONFIG_HALT_Pos) /*!< Bit mask of HALT field. */
+#define WDT_CONFIG_HALT_Pause (0UL) /*!< Pause watchdog while the CPU is halted by the debugger. */
+#define WDT_CONFIG_HALT_Run (1UL) /*!< Do not pause watchdog while the CPU is halted by the debugger. */
+
+/* Bit 0 : Configure the watchdog to pause or not while the CPU is sleeping. */
+#define WDT_CONFIG_SLEEP_Pos (0UL) /*!< Position of SLEEP field. */
+#define WDT_CONFIG_SLEEP_Msk (0x1UL << WDT_CONFIG_SLEEP_Pos) /*!< Bit mask of SLEEP field. */
+#define WDT_CONFIG_SLEEP_Pause (0UL) /*!< Pause watchdog while the CPU is asleep. */
+#define WDT_CONFIG_SLEEP_Run (1UL) /*!< Do not pause watchdog while the CPU is asleep. */
+
+/* Register: WDT_RR */
+/* Description: Reload requests registers. */
+
+/* Bits 31..0 : Reload register. */
+#define WDT_RR_RR_Pos (0UL) /*!< Position of RR field. */
+#define WDT_RR_RR_Msk (0xFFFFFFFFUL << WDT_RR_RR_Pos) /*!< Bit mask of RR field. */
+#define WDT_RR_RR_Reload (0x6E524635UL) /*!< Value to request a reload of the watchdog timer. */
+
+/* Register: WDT_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define WDT_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define WDT_POWER_POWER_Msk (0x1UL << WDT_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define WDT_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define WDT_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/*lint --flb "Leave library region" */
+#endif
diff --git a/os/hal/ports/NRF51/NRF51822/nrf51_delay.h b/os/hal/ports/NRF5/NRF51822/nrf_delay.h index 2a672db..f8668d6 100644 --- a/os/hal/ports/NRF51/NRF51822/nrf51_delay.h +++ b/os/hal/ports/NRF5/NRF51822/nrf_delay.h @@ -15,8 +15,8 @@ */ /** - * @file NRF51822/nrf51_delay.h - * @brief NRF51822 Delay routines + * @file NRF5/NRF51822/nrf_delay.h + * @brief NRF5 Delay routines * * @{ */ @@ -27,7 +27,7 @@ inline static void nrf_delay_us(uint32_t volatile number_of_us) __attribute__((always_inline)); inline static void nrf_delay_us(uint32_t volatile number_of_us) { -register uint32_t delay asm ("r0") = number_of_us; +register uint32_t delay __asm ("r0") = number_of_us; __asm volatile ( ".syntax unified\n" "1:\n" diff --git a/os/hal/ports/NRF5/NRF51822/platform.mk b/os/hal/ports/NRF5/NRF51822/platform.mk new file mode 100644 index 0000000..7305acf --- /dev/null +++ b/os/hal/ports/NRF5/NRF51822/platform.mk @@ -0,0 +1,66 @@ +ifeq ($(USE_SMART_BUILD),yes) +HALCONF := $(strip $(shell cat halconf.h halconf_community.h 2>/dev/null | egrep -e "define")) + +# List of all the NRF51x platform files. +PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF51822/hal_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_st_lld.c + +ifneq ($(findstring HAL_USE_PAL TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_pal_lld.c +endif +ifneq ($(findstring HAL_USE_SERIAL TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_serial_lld.c +endif +ifneq ($(findstring HAL_USE_SPI TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_spi_lld.c +endif +ifneq ($(findstring HAL_USE_EXT TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF51822/hal_ext_lld_isr.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF51822/hal_ext_lld.c +endif +ifneq ($(findstring HAL_USE_I2C TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_i2c_lld.c +endif +ifneq ($(findstring HAL_USE_ADC TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF51822/hal_adc_lld.c +endif +ifneq ($(findstring HAL_USE_GPT TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_gpt_lld.c +endif +ifneq ($(findstring HAL_USE_WDG TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_wdg_lld.c +endif +ifneq ($(findstring HAL_USE_RNG TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_rng_lld.c +endif +ifneq ($(findstring HAL_USE_PWM TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF51822/hal_pwm_lld.c +endif +ifneq ($(findstring HAL_USE_QEI TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_qei_lld.c +endif +else +PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF51822/hal_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_pal_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_serial_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_st_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_spi_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF51822/hal_ext_lld_isr.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF51822/hal_ext_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_i2c_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF51822/hal_adc_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_gpt_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_wdg_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_rng_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF51822/hal_pwm_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_qei_lld.c +endif + +# Required include directories +PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF51822 + + diff --git a/os/hal/ports/NRF5/NRF52832/hal_lld.c b/os/hal/ports/NRF5/NRF52832/hal_lld.c new file mode 100644 index 0000000..500de13 --- /dev/null +++ b/os/hal/ports/NRF5/NRF52832/hal_lld.c @@ -0,0 +1,80 @@ +/* + Copyright (C) 2016 Stephane D'Alu + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file NRF5/NRF52832/hal_lld.c + * @brief NRF52832 HAL Driver subsystem low level driver source. + * + * @addtogroup HAL + * @{ + */ + +#include "hal.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/** + * @brief Low level HAL driver initialization. + * + * @notapi + */ +void hal_lld_init(void) +{ + /* High frequency clock initialisation + */ + NRF_CLOCK->TASKS_HFCLKSTOP = 1; +#if !defined(NRF5_XTAL_VALUE) && (NRF5_XTAL_VALUE != 32000000) +#error "A 32Mhz crystal is mandatory on nRF52 boards." +#endif + + + /* Low frequency clock initialisation + * Clock is only started if st driver requires it + */ + NRF_CLOCK->TASKS_LFCLKSTOP = 1; + NRF_CLOCK->LFCLKSRC = NRF5_LFCLK_SOURCE; + +#if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) && \ + (NRF5_SYSTEM_TICKS == NRF5_SYSTEM_TICKS_AS_RTC) + NRF_CLOCK->TASKS_LFCLKSTART = 1; +#endif +} + +/** + * @} + */ diff --git a/os/hal/ports/NRF5/NRF52832/hal_lld.h b/os/hal/ports/NRF5/NRF52832/hal_lld.h new file mode 100644 index 0000000..24784d3 --- /dev/null +++ b/os/hal/ports/NRF5/NRF52832/hal_lld.h @@ -0,0 +1,110 @@ +/* + Copyright (C) 2016 Stephane D'Alu + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file NRF5/NRF52832/hal_lld.h + * @brief NRF52832 HAL subsystem low level driver header. + * + * @addtogroup HAL + * @{ + */ + +#ifndef HAL_LLD_H +#define HAL_LLD_H + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/** + * @name Platform identification + * @{ + */ +#define PLATFORM_NAME "Nordic Semiconductor nRF52832" + +/** + * @name Chip series + */ +#define NRF_SERIES 52 + +/** + * @brief Frequency value for the Low Frequency Clock + */ +#define NRF5_LFCLK_FREQUENCY 32768 + +/** + * @brief Frequency value for the High Frequency Clock + */ +#define NRF5_HFCLK_FREQUENCY 64000000 + +/** + * @} + */ + + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @brief Select source of Low Frequency Clock (LFCLK) + * @details Possible values for source are: + * 0 : RC oscillator + * 1 : External cristal + * 2 : Synthetized clock from High Frequency Clock (HFCLK) + * When cristal is not available it's preferable to use the + * internal RC oscillator that synthezing the clock. + */ +#if !defined(NRF5_LFCLK_SOURCE) || defined(__DOXYGEN__) +#define NRF5_LFCLK_SOURCE 0 +#endif + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +#if (NRF5_LFCLK_SOURCE < 0) || (NRF5_LFCLK_SOURCE > 2) +#error "Possible value for NRF5_LFCLK_SOURCE are 0=RC, 1=XTAL, 2=Synth" +#endif + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#include "nvic.h" + + +#ifdef __cplusplus +extern "C" { +#endif + void hal_lld_init(void); +#ifdef __cplusplus +} +#endif + +#endif /* HAL_LLD_H */ + +/** + * @} + */ diff --git a/os/hal/ports/NRF5/NRF52832/nrf52.h b/os/hal/ports/NRF5/NRF52832/nrf52.h new file mode 100644 index 0000000..1902d33 --- /dev/null +++ b/os/hal/ports/NRF5/NRF52832/nrf52.h @@ -0,0 +1,2126 @@ +
+/****************************************************************************************************//**
+ * @file nrf52.h
+ *
+ * @brief CMSIS Cortex-M4 Peripheral Access Layer Header File for
+ * nrf52 from Nordic Semiconductor.
+ *
+ * @version V1
+ * @date 23. February 2016
+ *
+ * @note Generated with SVDConv V2.81d
+ * from CMSIS SVD File 'nrf52.svd' Version 1,
+ *
+ * @par Copyright (c) 2015, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Nordic Semiconductor ASA nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ *******************************************************************************************************/
+
+
+
+/** @addtogroup Nordic Semiconductor
+ * @{
+ */
+
+/** @addtogroup nrf52
+ * @{
+ */
+
+#ifndef NRF52_H
+#define NRF52_H
+
+#include "nrf52_bitfields.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* ------------------------- Interrupt Number Definition ------------------------ */
+
+typedef enum {
+/* ------------------- Cortex-M4 Processor Exceptions Numbers ------------------- */
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
+ NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
+ MemoryManagement_IRQn = -12, /*!< 4 Memory Management, MPU mismatch, including Access Violation
+ and No Match */
+ BusFault_IRQn = -11, /*!< 5 Bus Fault, Pre-Fetch-, Memory Access Fault, other address/memory
+ related Fault */
+ UsageFault_IRQn = -10, /*!< 6 Usage Fault, i.e. Undef Instruction, Illegal State Transition */
+ SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
+ DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
+ PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
+ SysTick_IRQn = -1, /*!< 15 System Tick Timer */
+/* ---------------------- nrf52 Specific Interrupt Numbers ---------------------- */
+ POWER_CLOCK_IRQn = 0, /*!< 0 POWER_CLOCK */
+ RADIO_IRQn = 1, /*!< 1 RADIO */
+ UARTE0_UART0_IRQn = 2, /*!< 2 UARTE0_UART0 */
+ SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0_IRQn= 3, /*!< 3 SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0 */
+ SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1_IRQn= 4, /*!< 4 SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1 */
+ NFCT_IRQn = 5, /*!< 5 NFCT */
+ GPIOTE_IRQn = 6, /*!< 6 GPIOTE */
+ SAADC_IRQn = 7, /*!< 7 SAADC */
+ TIMER0_IRQn = 8, /*!< 8 TIMER0 */
+ TIMER1_IRQn = 9, /*!< 9 TIMER1 */
+ TIMER2_IRQn = 10, /*!< 10 TIMER2 */
+ RTC0_IRQn = 11, /*!< 11 RTC0 */
+ TEMP_IRQn = 12, /*!< 12 TEMP */
+ RNG_IRQn = 13, /*!< 13 RNG */
+ ECB_IRQn = 14, /*!< 14 ECB */
+ CCM_AAR_IRQn = 15, /*!< 15 CCM_AAR */
+ WDT_IRQn = 16, /*!< 16 WDT */
+ RTC1_IRQn = 17, /*!< 17 RTC1 */
+ QDEC_IRQn = 18, /*!< 18 QDEC */
+ COMP_LPCOMP_IRQn = 19, /*!< 19 COMP_LPCOMP */
+ SWI0_EGU0_IRQn = 20, /*!< 20 SWI0_EGU0 */
+ SWI1_EGU1_IRQn = 21, /*!< 21 SWI1_EGU1 */
+ SWI2_EGU2_IRQn = 22, /*!< 22 SWI2_EGU2 */
+ SWI3_EGU3_IRQn = 23, /*!< 23 SWI3_EGU3 */
+ SWI4_EGU4_IRQn = 24, /*!< 24 SWI4_EGU4 */
+ SWI5_EGU5_IRQn = 25, /*!< 25 SWI5_EGU5 */
+ TIMER3_IRQn = 26, /*!< 26 TIMER3 */
+ TIMER4_IRQn = 27, /*!< 27 TIMER4 */
+ PWM0_IRQn = 28, /*!< 28 PWM0 */
+ PDM_IRQn = 29, /*!< 29 PDM */
+ MWU_IRQn = 32, /*!< 32 MWU */
+ PWM1_IRQn = 33, /*!< 33 PWM1 */
+ PWM2_IRQn = 34, /*!< 34 PWM2 */
+ SPIM2_SPIS2_SPI2_IRQn = 35, /*!< 35 SPIM2_SPIS2_SPI2 */
+ RTC2_IRQn = 36, /*!< 36 RTC2 */
+ I2S_IRQn = 37, /*!< 37 I2S */
+ FPU_IRQn = 38 /*!< 38 FPU */
+} IRQn_Type;
+
+
+/** @addtogroup Configuration_of_CMSIS
+ * @{
+ */
+
+
+/* ================================================================================ */
+/* ================ Processor and Core Peripheral Section ================ */
+/* ================================================================================ */
+
+/* ----------------Configuration of the Cortex-M4 Processor and Core Peripherals---------------- */
+#define __CM4_REV 0x0001 /*!< Cortex-M4 Core Revision */
+#define __MPU_PRESENT 1 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< FPU present or not */
+/** @} */ /* End of group Configuration_of_CMSIS */
+
+#include "core_cm4.h" /*!< Cortex-M4 processor and core peripherals */
+
+
+/* ================================================================================ */
+/* ================ Device Specific Peripheral Section ================ */
+/* ================================================================================ */
+
+
+/** @addtogroup Device_Peripheral_Registers
+ * @{
+ */
+
+
+/* ------------------- Start of section using anonymous unions ------------------ */
+#if defined(__CC_ARM)
+ #pragma push
+ #pragma anon_unions
+#elif defined(__ICCARM__)
+ #pragma language=extended
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+/* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning 586
+#else
+ #warning Not supported compiler type
+#endif
+
+
+typedef struct {
+ __I uint32_t PART; /*!< Part code */
+ __I uint32_t VARIANT; /*!< Part Variant, Hardware version and Production configuration */
+ __I uint32_t PACKAGE; /*!< Package option */
+ __I uint32_t RAM; /*!< RAM variant */
+ __I uint32_t FLASH; /*!< Flash variant */
+ __IO uint32_t UNUSED0[3]; /*!< Description collection[0]: Unspecified */
+} FICR_INFO_Type;
+
+typedef struct {
+ __I uint32_t A0; /*!< Slope definition A0. */
+ __I uint32_t A1; /*!< Slope definition A1. */
+ __I uint32_t A2; /*!< Slope definition A2. */
+ __I uint32_t A3; /*!< Slope definition A3. */
+ __I uint32_t A4; /*!< Slope definition A4. */
+ __I uint32_t A5; /*!< Slope definition A5. */
+ __I uint32_t B0; /*!< y-intercept B0. */
+ __I uint32_t B1; /*!< y-intercept B1. */
+ __I uint32_t B2; /*!< y-intercept B2. */
+ __I uint32_t B3; /*!< y-intercept B3. */
+ __I uint32_t B4; /*!< y-intercept B4. */
+ __I uint32_t B5; /*!< y-intercept B5. */
+ __I uint32_t T0; /*!< Segment end T0. */
+ __I uint32_t T1; /*!< Segment end T1. */
+ __I uint32_t T2; /*!< Segment end T2. */
+ __I uint32_t T3; /*!< Segment end T3. */
+ __I uint32_t T4; /*!< Segment end T4. */
+} FICR_TEMP_Type;
+
+typedef struct {
+ __I uint32_t TAGHEADER0; /*!< Default header for NFC Tag. Software can read these values to
+ populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST. */
+ __I uint32_t TAGHEADER1; /*!< Default header for NFC Tag. Software can read these values to
+ populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST. */
+ __I uint32_t TAGHEADER2; /*!< Default header for NFC Tag. Software can read these values to
+ populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST. */
+ __I uint32_t TAGHEADER3; /*!< Default header for NFC Tag. Software can read these values to
+ populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST. */
+} FICR_NFC_Type;
+
+typedef struct {
+ __IO uint32_t POWER; /*!< Description cluster[0]: RAM0 power control register */
+ __O uint32_t POWERSET; /*!< Description cluster[0]: RAM0 power control set register */
+ __O uint32_t POWERCLR; /*!< Description cluster[0]: RAM0 power control clear register */
+ __I uint32_t RESERVED0;
+} POWER_RAM_Type;
+
+typedef struct {
+ __IO uint32_t CPU0; /*!< AHB bus master priority register for CPU0 */
+ __IO uint32_t SPIS1; /*!< AHB bus master priority register for SPIM1, SPIS1, TWIM1 and
+ TWIS1 */
+ __IO uint32_t RADIO; /*!< AHB bus master priority register for RADIO */
+ __IO uint32_t ECB; /*!< AHB bus master priority register for ECB */
+ __IO uint32_t CCM; /*!< AHB bus master priority register for CCM */
+ __IO uint32_t AAR; /*!< AHB bus master priority register for AAR */
+ __IO uint32_t SAADC; /*!< AHB bus master priority register for SAADC */
+ __IO uint32_t UARTE; /*!< AHB bus master priority register for UARTE */
+ __IO uint32_t SERIAL0; /*!< AHB bus master priority register for SPIM0, SPIS0, TWIM0 and
+ TWIS0 */
+ __IO uint32_t SERIAL2; /*!< AHB bus master priority register for SPIM2 and SPIS2 */
+ __IO uint32_t NFCT; /*!< AHB bus master priority register for NFCT */
+ __IO uint32_t I2S; /*!< AHB bus master priority register for I2S */
+ __IO uint32_t PDM; /*!< AHB bus master priority register for PDM */
+ __IO uint32_t PWM; /*!< AHB bus master priority register for PWM0, PWM1 and PWM2 */
+} AMLI_RAMPRI_Type;
+
+typedef struct {
+ __IO uint32_t RTS; /*!< Pin select for RTS signal */
+ __IO uint32_t TXD; /*!< Pin select for TXD signal */
+ __IO uint32_t CTS; /*!< Pin select for CTS signal */
+ __IO uint32_t RXD; /*!< Pin select for RXD signal */
+} UARTE_PSEL_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Data pointer */
+ __IO uint32_t MAXCNT; /*!< Maximum number of bytes in receive buffer */
+ __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last transaction */
+} UARTE_RXD_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Data pointer */
+ __IO uint32_t MAXCNT; /*!< Maximum number of bytes in transmit buffer */
+ __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last transaction */
+} UARTE_TXD_Type;
+
+typedef struct {
+ __IO uint32_t SCK; /*!< Pin select for SCK */
+ __IO uint32_t MOSI; /*!< Pin select for MOSI signal */
+ __IO uint32_t MISO; /*!< Pin select for MISO signal */
+} SPIM_PSEL_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Data pointer */
+ __IO uint32_t MAXCNT; /*!< Maximum number of bytes in receive buffer */
+ __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last transaction */
+ __IO uint32_t LIST; /*!< EasyDMA list type */
+} SPIM_RXD_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Data pointer */
+ __IO uint32_t MAXCNT; /*!< Maximum number of bytes in transmit buffer */
+ __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last transaction */
+ __IO uint32_t LIST; /*!< EasyDMA list type */
+} SPIM_TXD_Type;
+
+typedef struct {
+ __IO uint32_t SCK; /*!< Pin select for SCK */
+ __IO uint32_t MISO; /*!< Pin select for MISO signal */
+ __IO uint32_t MOSI; /*!< Pin select for MOSI signal */
+ __IO uint32_t CSN; /*!< Pin select for CSN signal */
+} SPIS_PSEL_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< RXD data pointer */
+ __IO uint32_t MAXCNT; /*!< Maximum number of bytes in receive buffer */
+ __I uint32_t AMOUNT; /*!< Number of bytes received in last granted transaction */
+} SPIS_RXD_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< TXD data pointer */
+ __IO uint32_t MAXCNT; /*!< Maximum number of bytes in transmit buffer */
+ __I uint32_t AMOUNT; /*!< Number of bytes transmitted in last granted transaction */
+} SPIS_TXD_Type;
+
+typedef struct {
+ __IO uint32_t SCL; /*!< Pin select for SCL signal */
+ __IO uint32_t SDA; /*!< Pin select for SDA signal */
+} TWIM_PSEL_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Data pointer */
+ __IO uint32_t MAXCNT; /*!< Maximum number of bytes in receive buffer */
+ __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last transaction */
+ __IO uint32_t LIST; /*!< EasyDMA list type */
+} TWIM_RXD_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Data pointer */
+ __IO uint32_t MAXCNT; /*!< Maximum number of bytes in transmit buffer */
+ __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last transaction */
+ __IO uint32_t LIST; /*!< EasyDMA list type */
+} TWIM_TXD_Type;
+
+typedef struct {
+ __IO uint32_t SCL; /*!< Pin select for SCL signal */
+ __IO uint32_t SDA; /*!< Pin select for SDA signal */
+} TWIS_PSEL_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< RXD Data pointer */
+ __IO uint32_t MAXCNT; /*!< Maximum number of bytes in RXD buffer */
+ __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last RXD transaction */
+} TWIS_RXD_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< TXD Data pointer */
+ __IO uint32_t MAXCNT; /*!< Maximum number of bytes in TXD buffer */
+ __I uint32_t AMOUNT; /*!< Number of bytes transferred in the last TXD transaction */
+} TWIS_TXD_Type;
+
+typedef struct {
+ __IO uint32_t SCK; /*!< Pin select for SCK */
+ __IO uint32_t MOSI; /*!< Pin select for MOSI */
+ __IO uint32_t MISO; /*!< Pin select for MISO */
+} SPI_PSEL_Type;
+
+typedef struct {
+ __IO uint32_t RX; /*!< Result of last incoming frames */
+} NFCT_FRAMESTATUS_Type;
+
+typedef struct {
+ __IO uint32_t FRAMECONFIG; /*!< Configuration of outgoing frames */
+ __IO uint32_t AMOUNT; /*!< Size of outgoing frame */
+} NFCT_TXD_Type;
+
+typedef struct {
+ __IO uint32_t FRAMECONFIG; /*!< Configuration of incoming frames */
+ __I uint32_t AMOUNT; /*!< Size of last incoming frame */
+} NFCT_RXD_Type;
+
+typedef struct {
+ __IO uint32_t LIMITH; /*!< Description cluster[0]: Last results is equal or above CH[0].LIMIT.HIGH */
+ __IO uint32_t LIMITL; /*!< Description cluster[0]: Last results is equal or below CH[0].LIMIT.LOW */
+} SAADC_EVENTS_CH_Type;
+
+typedef struct {
+ __IO uint32_t PSELP; /*!< Description cluster[0]: Input positive pin selection for CH[0] */
+ __IO uint32_t PSELN; /*!< Description cluster[0]: Input negative pin selection for CH[0] */
+ __IO uint32_t CONFIG; /*!< Description cluster[0]: Input configuration for CH[0] */
+ __IO uint32_t LIMIT; /*!< Description cluster[0]: High/low limits for event monitoring
+ a channel */
+} SAADC_CH_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Data pointer */
+ __IO uint32_t MAXCNT; /*!< Maximum number of buffer words to transfer */
+ __I uint32_t AMOUNT; /*!< Number of buffer words transferred since last START */
+} SAADC_RESULT_Type;
+
+typedef struct {
+ __IO uint32_t LED; /*!< Pin select for LED signal */
+ __IO uint32_t A; /*!< Pin select for A signal */
+ __IO uint32_t B; /*!< Pin select for B signal */
+} QDEC_PSEL_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Description cluster[0]: Beginning address in Data RAM of sequence
+ A */
+ __IO uint32_t CNT; /*!< Description cluster[0]: Amount of values (duty cycles) in sequence
+ A */
+ __IO uint32_t REFRESH; /*!< Description cluster[0]: Amount of additional PWM periods between
+ samples loaded to compare register (load every CNT+1 PWM periods) */
+ __IO uint32_t ENDDELAY; /*!< Description cluster[0]: Time added after the sequence */
+ __I uint32_t RESERVED1[4];
+} PWM_SEQ_Type;
+
+typedef struct {
+ __IO uint32_t OUT[4]; /*!< Description collection[0]: Output pin select for PWM channel
+ 0 */
+} PWM_PSEL_Type;
+
+typedef struct {
+ __IO uint32_t CLK; /*!< Pin number configuration for PDM CLK signal */
+ __IO uint32_t DIN; /*!< Pin number configuration for PDM DIN signal */
+} PDM_PSEL_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< RAM address pointer to write samples to with EasyDMA */
+ __IO uint32_t MAXCNT; /*!< Number of samples to allocate memory for in EasyDMA mode */
+} PDM_SAMPLE_Type;
+
+typedef struct {
+ __O uint32_t EN; /*!< Description cluster[0]: Enable channel group 0 */
+ __O uint32_t DIS; /*!< Description cluster[0]: Disable channel group 0 */
+} PPI_TASKS_CHG_Type;
+
+typedef struct {
+ __IO uint32_t EEP; /*!< Description cluster[0]: Channel 0 event end-point */
+ __IO uint32_t TEP; /*!< Description cluster[0]: Channel 0 task end-point */
+} PPI_CH_Type;
+
+typedef struct {
+ __IO uint32_t TEP; /*!< Description cluster[0]: Channel 0 task end-point */
+} PPI_FORK_Type;
+
+typedef struct {
+ __IO uint32_t WA; /*!< Description cluster[0]: Write access to region 0 detected */
+ __IO uint32_t RA; /*!< Description cluster[0]: Read access to region 0 detected */
+} MWU_EVENTS_REGION_Type;
+
+typedef struct {
+ __IO uint32_t WA; /*!< Description cluster[0]: Write access to peripheral region 0
+ detected */
+ __IO uint32_t RA; /*!< Description cluster[0]: Read access to peripheral region 0 detected */
+} MWU_EVENTS_PREGION_Type;
+
+typedef struct {
+ __IO uint32_t SUBSTATWA; /*!< Description cluster[0]: Source of event/interrupt in region
+ 0, write access detected while corresponding subregion was enabled
+ for watching */
+ __IO uint32_t SUBSTATRA; /*!< Description cluster[0]: Source of event/interrupt in region
+ 0, read access detected while corresponding subregion was enabled
+ for watching */
+} MWU_PERREGION_Type;
+
+typedef struct {
+ __IO uint32_t START; /*!< Description cluster[0]: Start address for region 0 */
+ __IO uint32_t END; /*!< Description cluster[0]: End address of region 0 */
+ __I uint32_t RESERVED2[2];
+} MWU_REGION_Type;
+
+typedef struct {
+ __I uint32_t START; /*!< Description cluster[0]: Reserved for future use */
+ __I uint32_t END; /*!< Description cluster[0]: Reserved for future use */
+ __IO uint32_t SUBS; /*!< Description cluster[0]: Subregions of region 0 */
+ __I uint32_t RESERVED3;
+} MWU_PREGION_Type;
+
+typedef struct {
+ __IO uint32_t MODE; /*!< I2S mode. */
+ __IO uint32_t RXEN; /*!< Reception (RX) enable. */
+ __IO uint32_t TXEN; /*!< Transmission (TX) enable. */
+ __IO uint32_t MCKEN; /*!< Master clock generator enable. */
+ __IO uint32_t MCKFREQ; /*!< Master clock generator frequency. */
+ __IO uint32_t RATIO; /*!< MCK / LRCK ratio. */
+ __IO uint32_t SWIDTH; /*!< Sample width. */
+ __IO uint32_t ALIGN; /*!< Alignment of sample within a frame. */
+ __IO uint32_t FORMAT; /*!< Frame format. */
+ __IO uint32_t CHANNELS; /*!< Enable channels. */
+} I2S_CONFIG_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Receive buffer RAM start address. */
+} I2S_RXD_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Transmit buffer RAM start address. */
+} I2S_TXD_Type;
+
+typedef struct {
+ __IO uint32_t MAXCNT; /*!< Size of RXD and TXD buffers. */
+} I2S_RXTXD_Type;
+
+typedef struct {
+ __IO uint32_t MCK; /*!< Pin select for MCK signal. */
+ __IO uint32_t SCK; /*!< Pin select for SCK signal. */
+ __IO uint32_t LRCK; /*!< Pin select for LRCK signal. */
+ __IO uint32_t SDIN; /*!< Pin select for SDIN signal. */
+ __IO uint32_t SDOUT; /*!< Pin select for SDOUT signal. */
+} I2S_PSEL_Type;
+
+
+/* ================================================================================ */
+/* ================ FICR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Factory Information Configuration Registers (FICR)
+ */
+
+typedef struct { /*!< FICR Structure */
+ __I uint32_t RESERVED0[4];
+ __I uint32_t CODEPAGESIZE; /*!< Code memory page size */
+ __I uint32_t CODESIZE; /*!< Code memory size */
+ __I uint32_t RESERVED1[18];
+ __I uint32_t DEVICEID[2]; /*!< Description collection[0]: Device identifier */
+ __I uint32_t RESERVED2[6];
+ __I uint32_t ER[4]; /*!< Description collection[0]: Encryption Root, word 0 */
+ __I uint32_t IR[4]; /*!< Description collection[0]: Identity Root, word 0 */
+ __I uint32_t DEVICEADDRTYPE; /*!< Device address type */
+ __I uint32_t DEVICEADDR[2]; /*!< Description collection[0]: Device address 0 */
+ __I uint32_t RESERVED3[21];
+ FICR_INFO_Type INFO; /*!< Device info */
+ __I uint32_t RESERVED4[185];
+ FICR_TEMP_Type TEMP; /*!< Registers storing factory TEMP module linearization coefficients */
+ __I uint32_t RESERVED5[2];
+ FICR_NFC_Type NFC; /*!< Unspecified */
+} NRF_FICR_Type;
+
+
+/* ================================================================================ */
+/* ================ UICR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief User Information Configuration Registers (UICR)
+ */
+
+typedef struct { /*!< UICR Structure */
+ __IO uint32_t UNUSED0; /*!< Unspecified */
+ __IO uint32_t UNUSED1; /*!< Unspecified */
+ __IO uint32_t UNUSED2; /*!< Unspecified */
+ __I uint32_t RESERVED0;
+ __IO uint32_t UNUSED3; /*!< Unspecified */
+ __IO uint32_t NRFFW[15]; /*!< Description collection[0]: Reserved for Nordic firmware design */
+ __IO uint32_t NRFHW[12]; /*!< Description collection[0]: Reserved for Nordic hardware design */
+ __IO uint32_t CUSTOMER[32]; /*!< Description collection[0]: Reserved for customer */
+ __I uint32_t RESERVED1[64];
+ __IO uint32_t PSELRESET[2]; /*!< Description collection[0]: Mapping of the nRESET function (see
+ POWER chapter for details) */
+ __IO uint32_t APPROTECT; /*!< Access Port protection */
+ __IO uint32_t NFCPINS; /*!< Setting of pins dedicated to NFC functionality: NFC antenna
+ or GPIO */
+} NRF_UICR_Type;
+
+
+/* ================================================================================ */
+/* ================ BPROT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Block Protect (BPROT)
+ */
+
+typedef struct { /*!< BPROT Structure */
+ __I uint32_t RESERVED0[384];
+ __IO uint32_t CONFIG0; /*!< Block protect configuration register 0 */
+ __IO uint32_t CONFIG1; /*!< Block protect configuration register 1 */
+ __IO uint32_t DISABLEINDEBUG; /*!< Disable protection mechanism in debug interface mode */
+ __IO uint32_t UNUSED0; /*!< Unspecified */
+ __IO uint32_t CONFIG2; /*!< Block protect configuration register 2 */
+ __IO uint32_t CONFIG3; /*!< Block protect configuration register 3 */
+} NRF_BPROT_Type;
+
+
+/* ================================================================================ */
+/* ================ POWER ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Power control (POWER)
+ */
+
+typedef struct { /*!< POWER Structure */
+ __I uint32_t RESERVED0[30];
+ __O uint32_t TASKS_CONSTLAT; /*!< Enable constant latency mode */
+ __O uint32_t TASKS_LOWPWR; /*!< Enable low power mode (variable latency) */
+ __I uint32_t RESERVED1[34];
+ __IO uint32_t EVENTS_POFWARN; /*!< Power failure warning */
+ __I uint32_t RESERVED2[2];
+ __IO uint32_t EVENTS_SLEEPENTER; /*!< CPU entered WFI/WFE sleep */
+ __IO uint32_t EVENTS_SLEEPEXIT; /*!< CPU exited WFI/WFE sleep */
+ __I uint32_t RESERVED3[122];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED4[61];
+ __IO uint32_t RESETREAS; /*!< Reset reason */
+ __I uint32_t RESERVED5[9];
+ __I uint32_t RAMSTATUS; /*!< Deprecated register - RAM status register */
+ __I uint32_t RESERVED6[53];
+ __O uint32_t SYSTEMOFF; /*!< System OFF register */
+ __I uint32_t RESERVED7[3];
+ __IO uint32_t POFCON; /*!< Power failure comparator configuration */
+ __I uint32_t RESERVED8[2];
+ __IO uint32_t GPREGRET; /*!< General purpose retention register */
+ __IO uint32_t GPREGRET2; /*!< General purpose retention register */
+ __IO uint32_t RAMON; /*!< Deprecated register - RAM on/off register (this register is
+ retained) */
+ __I uint32_t RESERVED9[11];
+ __IO uint32_t RAMONB; /*!< Deprecated register - RAM on/off register (this register is
+ retained) */
+ __I uint32_t RESERVED10[8];
+ __IO uint32_t DCDCEN; /*!< DC/DC enable register */
+ __I uint32_t RESERVED11[225];
+ POWER_RAM_Type RAM[8]; /*!< Unspecified */
+} NRF_POWER_Type;
+
+
+/* ================================================================================ */
+/* ================ CLOCK ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Clock control (CLOCK)
+ */
+
+typedef struct { /*!< CLOCK Structure */
+ __O uint32_t TASKS_HFCLKSTART; /*!< Start HFCLK crystal oscillator */
+ __O uint32_t TASKS_HFCLKSTOP; /*!< Stop HFCLK crystal oscillator */
+ __O uint32_t TASKS_LFCLKSTART; /*!< Start LFCLK source */
+ __O uint32_t TASKS_LFCLKSTOP; /*!< Stop LFCLK source */
+ __O uint32_t TASKS_CAL; /*!< Start calibration of LFRC oscillator */
+ __O uint32_t TASKS_CTSTART; /*!< Start calibration timer */
+ __O uint32_t TASKS_CTSTOP; /*!< Stop calibration timer */
+ __I uint32_t RESERVED0[57];
+ __IO uint32_t EVENTS_HFCLKSTARTED; /*!< HFCLK oscillator started */
+ __IO uint32_t EVENTS_LFCLKSTARTED; /*!< LFCLK started */
+ __I uint32_t RESERVED1;
+ __IO uint32_t EVENTS_DONE; /*!< Calibration of LFCLK RC oscillator complete event */
+ __IO uint32_t EVENTS_CTTO; /*!< Calibration timer timeout */
+ __I uint32_t RESERVED2[124];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED3[63];
+ __I uint32_t HFCLKRUN; /*!< Status indicating that HFCLKSTART task has been triggered */
+ __I uint32_t HFCLKSTAT; /*!< HFCLK status */
+ __I uint32_t RESERVED4;
+ __I uint32_t LFCLKRUN; /*!< Status indicating that LFCLKSTART task has been triggered */
+ __I uint32_t LFCLKSTAT; /*!< LFCLK status */
+ __I uint32_t LFCLKSRCCOPY; /*!< Copy of LFCLKSRC register, set when LFCLKSTART task was triggered */
+ __I uint32_t RESERVED5[62];
+ __IO uint32_t LFCLKSRC; /*!< Clock source for the LFCLK */
+ __I uint32_t RESERVED6[7];
+ __IO uint32_t CTIV; /*!< Calibration timer interval (retained register, same reset behaviour
+ as RESETREAS) */
+ __I uint32_t RESERVED7[8];
+ __IO uint32_t TRACECONFIG; /*!< Clocking options for the Trace Port debug interface */
+} NRF_CLOCK_Type;
+
+
+/* ================================================================================ */
+/* ================ AMLI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AHB Multi-Layer Interface (AMLI)
+ */
+
+typedef struct { /*!< AMLI Structure */
+ __I uint32_t RESERVED0[896];
+ AMLI_RAMPRI_Type RAMPRI; /*!< RAM configurable priority configuration structure */
+} NRF_AMLI_Type;
+
+
+/* ================================================================================ */
+/* ================ RADIO ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief 2.4 GHz Radio (RADIO)
+ */
+
+typedef struct { /*!< RADIO Structure */
+ __O uint32_t TASKS_TXEN; /*!< Enable RADIO in TX mode */
+ __O uint32_t TASKS_RXEN; /*!< Enable RADIO in RX mode */
+ __O uint32_t TASKS_START; /*!< Start RADIO */
+ __O uint32_t TASKS_STOP; /*!< Stop RADIO */
+ __O uint32_t TASKS_DISABLE; /*!< Disable RADIO */
+ __O uint32_t TASKS_RSSISTART; /*!< Start the RSSI and take one single sample of the receive signal
+ strength. */
+ __O uint32_t TASKS_RSSISTOP; /*!< Stop the RSSI measurement */
+ __O uint32_t TASKS_BCSTART; /*!< Start the bit counter */
+ __O uint32_t TASKS_BCSTOP; /*!< Stop the bit counter */
+ __I uint32_t RESERVED0[55];
+ __IO uint32_t EVENTS_READY; /*!< RADIO has ramped up and is ready to be started */
+ __IO uint32_t EVENTS_ADDRESS; /*!< Address sent or received */
+ __IO uint32_t EVENTS_PAYLOAD; /*!< Packet payload sent or received */
+ __IO uint32_t EVENTS_END; /*!< Packet sent or received */
+ __IO uint32_t EVENTS_DISABLED; /*!< RADIO has been disabled */
+ __IO uint32_t EVENTS_DEVMATCH; /*!< A device address match occurred on the last received packet */
+ __IO uint32_t EVENTS_DEVMISS; /*!< No device address match occurred on the last received packet */
+ __IO uint32_t EVENTS_RSSIEND; /*!< Sampling of receive signal strength complete. */
+ __I uint32_t RESERVED1[2];
+ __IO uint32_t EVENTS_BCMATCH; /*!< Bit counter reached bit count value. */
+ __I uint32_t RESERVED2;
+ __IO uint32_t EVENTS_CRCOK; /*!< Packet received with CRC ok */
+ __IO uint32_t EVENTS_CRCERROR; /*!< Packet received with CRC error */
+ __I uint32_t RESERVED3[50];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED4[64];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED5[61];
+ __I uint32_t CRCSTATUS; /*!< CRC status */
+ __I uint32_t RESERVED6;
+ __I uint32_t RXMATCH; /*!< Received address */
+ __I uint32_t RXCRC; /*!< CRC field of previously received packet */
+ __I uint32_t DAI; /*!< Device address match index */
+ __I uint32_t RESERVED7[60];
+ __IO uint32_t PACKETPTR; /*!< Packet pointer */
+ __IO uint32_t FREQUENCY; /*!< Frequency */
+ __IO uint32_t TXPOWER; /*!< Output power */
+ __IO uint32_t MODE; /*!< Data rate and modulation */
+ __IO uint32_t PCNF0; /*!< Packet configuration register 0 */
+ __IO uint32_t PCNF1; /*!< Packet configuration register 1 */
+ __IO uint32_t BASE0; /*!< Base address 0 */
+ __IO uint32_t BASE1; /*!< Base address 1 */
+ __IO uint32_t PREFIX0; /*!< Prefixes bytes for logical addresses 0-3 */
+ __IO uint32_t PREFIX1; /*!< Prefixes bytes for logical addresses 4-7 */
+ __IO uint32_t TXADDRESS; /*!< Transmit address select */
+ __IO uint32_t RXADDRESSES; /*!< Receive address select */
+ __IO uint32_t CRCCNF; /*!< CRC configuration */
+ __IO uint32_t CRCPOLY; /*!< CRC polynomial */
+ __IO uint32_t CRCINIT; /*!< CRC initial value */
+ __IO uint32_t UNUSED0; /*!< Unspecified */
+ __IO uint32_t TIFS; /*!< Inter Frame Spacing in us */
+ __I uint32_t RSSISAMPLE; /*!< RSSI sample */
+ __I uint32_t RESERVED8;
+ __I uint32_t STATE; /*!< Current radio state */
+ __IO uint32_t DATAWHITEIV; /*!< Data whitening initial value */
+ __I uint32_t RESERVED9[2];
+ __IO uint32_t BCC; /*!< Bit counter compare */
+ __I uint32_t RESERVED10[39];
+ __IO uint32_t DAB[8]; /*!< Description collection[0]: Device address base segment 0 */
+ __IO uint32_t DAP[8]; /*!< Description collection[0]: Device address prefix 0 */
+ __IO uint32_t DACNF; /*!< Device address match configuration */
+ __I uint32_t RESERVED11[3];
+ __IO uint32_t MODECNF0; /*!< Radio mode configuration register 0 */
+ __I uint32_t RESERVED12[618];
+ __IO uint32_t POWER; /*!< Peripheral power control */
+} NRF_RADIO_Type;
+
+
+/* ================================================================================ */
+/* ================ UARTE ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief UART with EasyDMA (UARTE)
+ */
+
+typedef struct { /*!< UARTE Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start UART receiver */
+ __O uint32_t TASKS_STOPRX; /*!< Stop UART receiver */
+ __O uint32_t TASKS_STARTTX; /*!< Start UART transmitter */
+ __O uint32_t TASKS_STOPTX; /*!< Stop UART transmitter */
+ __I uint32_t RESERVED0[7];
+ __O uint32_t TASKS_FLUSHRX; /*!< Flush RX FIFO into RX buffer */
+ __I uint32_t RESERVED1[52];
+ __IO uint32_t EVENTS_CTS; /*!< CTS is activated (set low). Clear To Send. */
+ __IO uint32_t EVENTS_NCTS; /*!< CTS is deactivated (set high). Not Clear To Send. */
+ __I uint32_t RESERVED2[2];
+ __IO uint32_t EVENTS_ENDRX; /*!< Receive buffer is filled up */
+ __I uint32_t RESERVED3[3];
+ __IO uint32_t EVENTS_ENDTX; /*!< Last TX byte transmitted */
+ __IO uint32_t EVENTS_ERROR; /*!< Error detected */
+ __I uint32_t RESERVED4[7];
+ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout */
+ __I uint32_t RESERVED5;
+ __IO uint32_t EVENTS_RXSTARTED; /*!< UART receiver has started */
+ __IO uint32_t EVENTS_TXSTARTED; /*!< UART transmitter has started */
+ __I uint32_t RESERVED6;
+ __IO uint32_t EVENTS_TXSTOPPED; /*!< Transmitter stopped */
+ __I uint32_t RESERVED7[41];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED8[63];
+ __IO uint32_t INTEN; /*!< Enable or disable interrupt */
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED9[93];
+ __IO uint32_t ERRORSRC; /*!< Error source */
+ __I uint32_t RESERVED10[31];
+ __IO uint32_t ENABLE; /*!< Enable UART */
+ __I uint32_t RESERVED11;
+ UARTE_PSEL_Type PSEL; /*!< Unspecified */
+ __I uint32_t RESERVED12[3];
+ __IO uint32_t BAUDRATE; /*!< Baud rate */
+ __I uint32_t RESERVED13[3];
+ UARTE_RXD_Type RXD; /*!< RXD EasyDMA channel */
+ __I uint32_t RESERVED14;
+ UARTE_TXD_Type TXD; /*!< TXD EasyDMA channel */
+ __I uint32_t RESERVED15[7];
+ __IO uint32_t CONFIG; /*!< Configuration of parity and hardware flow control */
+} NRF_UARTE_Type;
+
+
+/* ================================================================================ */
+/* ================ UART ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Universal Asynchronous Receiver/Transmitter (UART)
+ */
+
+typedef struct { /*!< UART Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start UART receiver */
+ __O uint32_t TASKS_STOPRX; /*!< Stop UART receiver */
+ __O uint32_t TASKS_STARTTX; /*!< Start UART transmitter */
+ __O uint32_t TASKS_STOPTX; /*!< Stop UART transmitter */
+ __I uint32_t RESERVED0[3];
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend UART */
+ __I uint32_t RESERVED1[56];
+ __IO uint32_t EVENTS_CTS; /*!< CTS is activated (set low). Clear To Send. */
+ __IO uint32_t EVENTS_NCTS; /*!< CTS is deactivated (set high). Not Clear To Send. */
+ __IO uint32_t EVENTS_RXDRDY; /*!< Data received in RXD */
+ __I uint32_t RESERVED2[4];
+ __IO uint32_t EVENTS_TXDRDY; /*!< Data sent from TXD */
+ __I uint32_t RESERVED3;
+ __IO uint32_t EVENTS_ERROR; /*!< Error detected */
+ __I uint32_t RESERVED4[7];
+ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout */
+ __I uint32_t RESERVED5[46];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED6[64];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED7[93];
+ __IO uint32_t ERRORSRC; /*!< Error source */
+ __I uint32_t RESERVED8[31];
+ __IO uint32_t ENABLE; /*!< Enable UART */
+ __I uint32_t RESERVED9;
+ __IO uint32_t PSELRTS; /*!< Pin select for RTS */
+ __IO uint32_t PSELTXD; /*!< Pin select for TXD */
+ __IO uint32_t PSELCTS; /*!< Pin select for CTS */
+ __IO uint32_t PSELRXD; /*!< Pin select for RXD */
+ __I uint32_t RXD; /*!< RXD register */
+ __O uint32_t TXD; /*!< TXD register */
+ __I uint32_t RESERVED10;
+ __IO uint32_t BAUDRATE; /*!< Baud rate */
+ __I uint32_t RESERVED11[17];
+ __IO uint32_t CONFIG; /*!< Configuration of parity and hardware flow control */
+} NRF_UART_Type;
+
+
+/* ================================================================================ */
+/* ================ SPIM ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Serial Peripheral Interface Master with EasyDMA 0 (SPIM)
+ */
+
+typedef struct { /*!< SPIM Structure */
+ __I uint32_t RESERVED0[4];
+ __O uint32_t TASKS_START; /*!< Start SPI transaction */
+ __O uint32_t TASKS_STOP; /*!< Stop SPI transaction */
+ __I uint32_t RESERVED1;
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend SPI transaction */
+ __O uint32_t TASKS_RESUME; /*!< Resume SPI transaction */
+ __I uint32_t RESERVED2[56];
+ __IO uint32_t EVENTS_STOPPED; /*!< SPI transaction has stopped */
+ __I uint32_t RESERVED3[2];
+ __IO uint32_t EVENTS_ENDRX; /*!< End of RXD buffer reached */
+ __I uint32_t RESERVED4;
+ __IO uint32_t EVENTS_END; /*!< End of RXD buffer and TXD buffer reached */
+ __I uint32_t RESERVED5;
+ __IO uint32_t EVENTS_ENDTX; /*!< End of TXD buffer reached */
+ __I uint32_t RESERVED6[10];
+ __IO uint32_t EVENTS_STARTED; /*!< Transaction started */
+ __I uint32_t RESERVED7[44];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED8[64];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED9[125];
+ __IO uint32_t ENABLE; /*!< Enable SPIM */
+ __I uint32_t RESERVED10;
+ SPIM_PSEL_Type PSEL; /*!< Unspecified */
+ __I uint32_t RESERVED11[4];
+ __IO uint32_t FREQUENCY; /*!< SPI frequency */
+ __I uint32_t RESERVED12[3];
+ SPIM_RXD_Type RXD; /*!< RXD EasyDMA channel */
+ SPIM_TXD_Type TXD; /*!< TXD EasyDMA channel */
+ __IO uint32_t CONFIG; /*!< Configuration register */
+ __I uint32_t RESERVED13[26];
+ __IO uint32_t ORC; /*!< Over-read character. Character clocked out in case and over-read
+ of the TXD buffer. */
+} NRF_SPIM_Type;
+
+
+/* ================================================================================ */
+/* ================ SPIS ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI Slave 0 (SPIS)
+ */
+
+typedef struct { /*!< SPIS Structure */
+ __I uint32_t RESERVED0[9];
+ __O uint32_t TASKS_ACQUIRE; /*!< Acquire SPI semaphore */
+ __O uint32_t TASKS_RELEASE; /*!< Release SPI semaphore, enabling the SPI slave to acquire it */
+ __I uint32_t RESERVED1[54];
+ __IO uint32_t EVENTS_END; /*!< Granted transaction completed */
+ __I uint32_t RESERVED2[2];
+ __IO uint32_t EVENTS_ENDRX; /*!< End of RXD buffer reached */
+ __I uint32_t RESERVED3[5];
+ __IO uint32_t EVENTS_ACQUIRED; /*!< Semaphore acquired */
+ __I uint32_t RESERVED4[53];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED5[64];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED6[61];
+ __I uint32_t SEMSTAT; /*!< Semaphore status register */
+ __I uint32_t RESERVED7[15];
+ __IO uint32_t STATUS; /*!< Status from last transaction */
+ __I uint32_t RESERVED8[47];
+ __IO uint32_t ENABLE; /*!< Enable SPI slave */
+ __I uint32_t RESERVED9;
+ SPIS_PSEL_Type PSEL; /*!< Unspecified */
+ __I uint32_t RESERVED10[7];
+ SPIS_RXD_Type RXD; /*!< Unspecified */
+ __I uint32_t RESERVED11;
+ SPIS_TXD_Type TXD; /*!< Unspecified */
+ __I uint32_t RESERVED12;
+ __IO uint32_t CONFIG; /*!< Configuration register */
+ __I uint32_t RESERVED13;
+ __IO uint32_t DEF; /*!< Default character. Character clocked out in case of an ignored
+ transaction. */
+ __I uint32_t RESERVED14[24];
+ __IO uint32_t ORC; /*!< Over-read character */
+} NRF_SPIS_Type;
+
+
+/* ================================================================================ */
+/* ================ TWIM ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief I2C compatible Two-Wire Master Interface with EasyDMA 0 (TWIM)
+ */
+
+typedef struct { /*!< TWIM Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start TWI receive sequence */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STARTTX; /*!< Start TWI transmit sequence */
+ __I uint32_t RESERVED1[2];
+ __O uint32_t TASKS_STOP; /*!< Stop TWI transaction. Must be issued while the TWI master is
+ not suspended. */
+ __I uint32_t RESERVED2;
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend TWI transaction */
+ __O uint32_t TASKS_RESUME; /*!< Resume TWI transaction */
+ __I uint32_t RESERVED3[56];
+ __IO uint32_t EVENTS_STOPPED; /*!< TWI stopped */
+ __I uint32_t RESERVED4[7];
+ __IO uint32_t EVENTS_ERROR; /*!< TWI error */
+ __I uint32_t RESERVED5[8];
+ __IO uint32_t EVENTS_SUSPENDED; /*!< Last byte has been sent out after the SUSPEND task has been
+ issued, TWI traffic is now suspended. */
+ __IO uint32_t EVENTS_RXSTARTED; /*!< Receive sequence started */
+ __IO uint32_t EVENTS_TXSTARTED; /*!< Transmit sequence started */
+ __I uint32_t RESERVED6[2];
+ __IO uint32_t EVENTS_LASTRX; /*!< Byte boundary, starting to receive the last byte */
+ __IO uint32_t EVENTS_LASTTX; /*!< Byte boundary, starting to transmit the last byte */
+ __I uint32_t RESERVED7[39];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED8[63];
+ __IO uint32_t INTEN; /*!< Enable or disable interrupt */
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED9[110];
+ __IO uint32_t ERRORSRC; /*!< Error source */
+ __I uint32_t RESERVED10[14];
+ __IO uint32_t ENABLE; /*!< Enable TWIM */
+ __I uint32_t RESERVED11;
+ TWIM_PSEL_Type PSEL; /*!< Unspecified */
+ __I uint32_t RESERVED12[5];
+ __IO uint32_t FREQUENCY; /*!< TWI frequency */
+ __I uint32_t RESERVED13[3];
+ TWIM_RXD_Type RXD; /*!< RXD EasyDMA channel */
+ TWIM_TXD_Type TXD; /*!< TXD EasyDMA channel */
+ __I uint32_t RESERVED14[13];
+ __IO uint32_t ADDRESS; /*!< Address used in the TWI transfer */
+} NRF_TWIM_Type;
+
+
+/* ================================================================================ */
+/* ================ TWIS ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief I2C compatible Two-Wire Slave Interface with EasyDMA 0 (TWIS)
+ */
+
+typedef struct { /*!< TWIS Structure */
+ __I uint32_t RESERVED0[5];
+ __O uint32_t TASKS_STOP; /*!< Stop TWI transaction */
+ __I uint32_t RESERVED1;
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend TWI transaction */
+ __O uint32_t TASKS_RESUME; /*!< Resume TWI transaction */
+ __I uint32_t RESERVED2[3];
+ __O uint32_t TASKS_PREPARERX; /*!< Prepare the TWI slave to respond to a write command */
+ __O uint32_t TASKS_PREPARETX; /*!< Prepare the TWI slave to respond to a read command */
+ __I uint32_t RESERVED3[51];
+ __IO uint32_t EVENTS_STOPPED; /*!< TWI stopped */
+ __I uint32_t RESERVED4[7];
+ __IO uint32_t EVENTS_ERROR; /*!< TWI error */
+ __I uint32_t RESERVED5[9];
+ __IO uint32_t EVENTS_RXSTARTED; /*!< Receive sequence started */
+ __IO uint32_t EVENTS_TXSTARTED; /*!< Transmit sequence started */
+ __I uint32_t RESERVED6[4];
+ __IO uint32_t EVENTS_WRITE; /*!< Write command received */
+ __IO uint32_t EVENTS_READ; /*!< Read command received */
+ __I uint32_t RESERVED7[37];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED8[63];
+ __IO uint32_t INTEN; /*!< Enable or disable interrupt */
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED9[113];
+ __IO uint32_t ERRORSRC; /*!< Error source */
+ __I uint32_t MATCH; /*!< Status register indicating which address had a match */
+ __I uint32_t RESERVED10[10];
+ __IO uint32_t ENABLE; /*!< Enable TWIS */
+ __I uint32_t RESERVED11;
+ TWIS_PSEL_Type PSEL; /*!< Unspecified */
+ __I uint32_t RESERVED12[9];
+ TWIS_RXD_Type RXD; /*!< RXD EasyDMA channel */
+ __I uint32_t RESERVED13;
+ TWIS_TXD_Type TXD; /*!< TXD EasyDMA channel */
+ __I uint32_t RESERVED14[14];
+ __IO uint32_t ADDRESS[2]; /*!< Description collection[0]: TWI slave address 0 */
+ __I uint32_t RESERVED15;
+ __IO uint32_t CONFIG; /*!< Configuration register for the address match mechanism */
+ __I uint32_t RESERVED16[10];
+ __IO uint32_t ORC; /*!< Over-read character. Character sent out in case of an over-read
+ of the transmit buffer. */
+} NRF_TWIS_Type;
+
+
+/* ================================================================================ */
+/* ================ SPI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Serial Peripheral Interface 0 (SPI)
+ */
+
+typedef struct { /*!< SPI Structure */
+ __I uint32_t RESERVED0[66];
+ __IO uint32_t EVENTS_READY; /*!< TXD byte sent and RXD byte received */
+ __I uint32_t RESERVED1[126];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED2[125];
+ __IO uint32_t ENABLE; /*!< Enable SPI */
+ __I uint32_t RESERVED3;
+ SPI_PSEL_Type PSEL; /*!< Unspecified */
+ __I uint32_t RESERVED4;
+ __I uint32_t RXD; /*!< RXD register */
+ __IO uint32_t TXD; /*!< TXD register */
+ __I uint32_t RESERVED5;
+ __IO uint32_t FREQUENCY; /*!< SPI frequency */
+ __I uint32_t RESERVED6[11];
+ __IO uint32_t CONFIG; /*!< Configuration register */
+} NRF_SPI_Type;
+
+
+/* ================================================================================ */
+/* ================ TWI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief I2C compatible Two-Wire Interface 0 (TWI)
+ */
+
+typedef struct { /*!< TWI Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start TWI receive sequence */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STARTTX; /*!< Start TWI transmit sequence */
+ __I uint32_t RESERVED1[2];
+ __O uint32_t TASKS_STOP; /*!< Stop TWI transaction */
+ __I uint32_t RESERVED2;
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend TWI transaction */
+ __O uint32_t TASKS_RESUME; /*!< Resume TWI transaction */
+ __I uint32_t RESERVED3[56];
+ __IO uint32_t EVENTS_STOPPED; /*!< TWI stopped */
+ __IO uint32_t EVENTS_RXDREADY; /*!< TWI RXD byte received */
+ __I uint32_t RESERVED4[4];
+ __IO uint32_t EVENTS_TXDSENT; /*!< TWI TXD byte sent */
+ __I uint32_t RESERVED5;
+ __IO uint32_t EVENTS_ERROR; /*!< TWI error */
+ __I uint32_t RESERVED6[4];
+ __IO uint32_t EVENTS_BB; /*!< TWI byte boundary, generated before each byte that is sent or
+ received */
+ __I uint32_t RESERVED7[3];
+ __IO uint32_t EVENTS_SUSPENDED; /*!< TWI entered the suspended state */
+ __I uint32_t RESERVED8[45];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED9[64];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED10[110];
+ __IO uint32_t ERRORSRC; /*!< Error source */
+ __I uint32_t RESERVED11[14];
+ __IO uint32_t ENABLE; /*!< Enable TWI */
+ __I uint32_t RESERVED12;
+ __IO uint32_t PSELSCL; /*!< Pin select for SCL */
+ __IO uint32_t PSELSDA; /*!< Pin select for SDA */
+ __I uint32_t RESERVED13[2];
+ __I uint32_t RXD; /*!< RXD register */
+ __IO uint32_t TXD; /*!< TXD register */
+ __I uint32_t RESERVED14;
+ __IO uint32_t FREQUENCY; /*!< TWI frequency */
+ __I uint32_t RESERVED15[24];
+ __IO uint32_t ADDRESS; /*!< Address used in the TWI transfer */
+} NRF_TWI_Type;
+
+
+/* ================================================================================ */
+/* ================ NFCT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief NFC-A compatible radio (NFCT)
+ */
+
+typedef struct { /*!< NFCT Structure */
+ __O uint32_t TASKS_ACTIVATE; /*!< Activate NFC peripheral for incoming and outgoing frames, change
+ state to activated */
+ __O uint32_t TASKS_DISABLE; /*!< Disable NFC peripheral */
+ __O uint32_t TASKS_SENSE; /*!< Enable NFC sense field mode, change state to sense mode */
+ __O uint32_t TASKS_STARTTX; /*!< Start transmission of a outgoing frame, change state to transmit */
+ __I uint32_t RESERVED0[3];
+ __O uint32_t TASKS_ENABLERXDATA; /*!< Initializes the EasyDMA for receive. */
+ __I uint32_t RESERVED1;
+ __O uint32_t TASKS_GOIDLE; /*!< Force state machine to IDLE state */
+ __O uint32_t TASKS_GOSLEEP; /*!< Force state machine to SLEEP_A state */
+ __I uint32_t RESERVED2[53];
+ __IO uint32_t EVENTS_READY; /*!< The NFC peripheral is ready to receive and send frames */
+ __IO uint32_t EVENTS_FIELDDETECTED; /*!< Remote NFC field detected */
+ __IO uint32_t EVENTS_FIELDLOST; /*!< Remote NFC field lost */
+ __IO uint32_t EVENTS_TXFRAMESTART; /*!< Marks the start of the first symbol of a transmitted frame */
+ __IO uint32_t EVENTS_TXFRAMEEND; /*!< Marks the end of the last transmitted on-air symbol of a frame */
+ __IO uint32_t EVENTS_RXFRAMESTART; /*!< Marks the end of the first symbol of a received frame */
+ __IO uint32_t EVENTS_RXFRAMEEND; /*!< Received data have been checked (CRC, parity) and transferred
+ to RAM, and EasyDMA has ended accessing the RX buffer */
+ __IO uint32_t EVENTS_ERROR; /*!< NFC error reported. The ERRORSTATUS register contains details
+ on the source of the error. */
+ __I uint32_t RESERVED3[2];
+ __IO uint32_t EVENTS_RXERROR; /*!< NFC RX frame error reported. The FRAMESTATUS.RX register contains
+ details on the source of the error. */
+ __IO uint32_t EVENTS_ENDRX; /*!< RX buffer (as defined by PACKETPTR and MAXLEN) in Data RAM full. */
+ __IO uint32_t EVENTS_ENDTX; /*!< Transmission of data in RAM has ended, and EasyDMA has ended
+ accessing the TX buffer */
+ __I uint32_t RESERVED4;
+ __IO uint32_t EVENTS_AUTOCOLRESSTARTED; /*!< Auto collision resolution process has started */
+ __I uint32_t RESERVED5[3];
+ __IO uint32_t EVENTS_COLLISION; /*!< NFC Auto collision resolution error reported. */
+ __IO uint32_t EVENTS_SELECTED; /*!< NFC Auto collision resolution successfully completed */
+ __IO uint32_t EVENTS_STARTED; /*!< EasyDMA is ready to receive or send frames. */
+ __I uint32_t RESERVED6[43];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED7[63];
+ __IO uint32_t INTEN; /*!< Enable or disable interrupt */
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED8[62];
+ __IO uint32_t ERRORSTATUS; /*!< NFC Error Status register */
+ __I uint32_t RESERVED9;
+ NFCT_FRAMESTATUS_Type FRAMESTATUS; /*!< Unspecified */
+ __I uint32_t RESERVED10[8];
+ __I uint32_t CURRENTLOADCTRL; /*!< Current value driven to the NFC Load Control */
+ __I uint32_t RESERVED11[2];
+ __I uint32_t FIELDPRESENT; /*!< Indicates the presence or not of a valid field */
+ __I uint32_t RESERVED12[49];
+ __IO uint32_t FRAMEDELAYMIN; /*!< Minimum frame delay */
+ __IO uint32_t FRAMEDELAYMAX; /*!< Maximum frame delay */
+ __IO uint32_t FRAMEDELAYMODE; /*!< Configuration register for the Frame Delay Timer */
+ __IO uint32_t PACKETPTR; /*!< Packet pointer for TXD and RXD data storage in Data RAM */
+ __IO uint32_t MAXLEN; /*!< Size of allocated for TXD and RXD data storage buffer in Data
+ RAM */
+ NFCT_TXD_Type TXD; /*!< Unspecified */
+ NFCT_RXD_Type RXD; /*!< Unspecified */
+ __I uint32_t RESERVED13[26];
+ __IO uint32_t NFCID1_LAST; /*!< Last NFCID1 part (4, 7 or 10 bytes ID) */
+ __IO uint32_t NFCID1_2ND_LAST; /*!< Second last NFCID1 part (7 or 10 bytes ID) */
+ __IO uint32_t NFCID1_3RD_LAST; /*!< Third last NFCID1 part (10 bytes ID) */
+ __I uint32_t RESERVED14;
+ __IO uint32_t SENSRES; /*!< NFC-A SENS_RES auto-response settings */
+ __IO uint32_t SELRES; /*!< NFC-A SEL_RES auto-response settings */
+} NRF_NFCT_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIOTE ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief GPIO Tasks and Events (GPIOTE)
+ */
+
+typedef struct { /*!< GPIOTE Structure */
+ __O uint32_t TASKS_OUT[8]; /*!< Description collection[0]: Task for writing to pin specified
+ in CONFIG[0].PSEL. Action on pin is configured in CONFIG[0].POLARITY. */
+ __I uint32_t RESERVED0[4];
+ __O uint32_t TASKS_SET[8]; /*!< Description collection[0]: Task for writing to pin specified
+ in CONFIG[0].PSEL. Action on pin is to set it high. */
+ __I uint32_t RESERVED1[4];
+ __O uint32_t TASKS_CLR[8]; /*!< Description collection[0]: Task for writing to pin specified
+ in CONFIG[0].PSEL. Action on pin is to set it low. */
+ __I uint32_t RESERVED2[32];
+ __IO uint32_t EVENTS_IN[8]; /*!< Description collection[0]: Event generated from pin specified
+ in CONFIG[0].PSEL */
+ __I uint32_t RESERVED3[23];
+ __IO uint32_t EVENTS_PORT; /*!< Event generated from multiple input GPIO pins with SENSE mechanism
+ enabled */
+ __I uint32_t RESERVED4[97];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED5[129];
+ __IO uint32_t CONFIG[8]; /*!< Description collection[0]: Configuration for OUT[n], SET[n]
+ and CLR[n] tasks and IN[n] event */
+} NRF_GPIOTE_Type;
+
+
+/* ================================================================================ */
+/* ================ SAADC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Analog to Digital Converter (SAADC)
+ */
+
+typedef struct { /*!< SAADC Structure */
+ __O uint32_t TASKS_START; /*!< Start the ADC and prepare the result buffer in RAM */
+ __O uint32_t TASKS_SAMPLE; /*!< Take one ADC sample, if scan is enabled all channels are sampled */
+ __O uint32_t TASKS_STOP; /*!< Stop the ADC and terminate any on-going conversion */
+ __O uint32_t TASKS_CALIBRATEOFFSET; /*!< Starts offset auto-calibration */
+ __I uint32_t RESERVED0[60];
+ __IO uint32_t EVENTS_STARTED; /*!< The ADC has started */
+ __IO uint32_t EVENTS_END; /*!< The ADC has filled up the Result buffer */
+ __IO uint32_t EVENTS_DONE; /*!< A conversion task has been completed. Depending on the mode,
+ multiple conversions might be needed for a result to be transferred
+ to RAM. */
+ __IO uint32_t EVENTS_RESULTDONE; /*!< A result is ready to get transferred to RAM. */
+ __IO uint32_t EVENTS_CALIBRATEDONE; /*!< Calibration is complete */
+ __IO uint32_t EVENTS_STOPPED; /*!< The ADC has stopped */
+ SAADC_EVENTS_CH_Type EVENTS_CH[8]; /*!< Unspecified */
+ __I uint32_t RESERVED1[106];
+ __IO uint32_t INTEN; /*!< Enable or disable interrupt */
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED2[61];
+ __I uint32_t STATUS; /*!< Status */
+ __I uint32_t RESERVED3[63];
+ __IO uint32_t ENABLE; /*!< Enable or disable ADC */
+ __I uint32_t RESERVED4[3];
+ SAADC_CH_Type CH[8]; /*!< Unspecified */
+ __I uint32_t RESERVED5[24];
+ __IO uint32_t RESOLUTION; /*!< Resolution configuration */
+ __IO uint32_t OVERSAMPLE; /*!< Oversampling configuration. OVERSAMPLE should not be combined
+ with SCAN. The RESOLUTION is applied before averaging, thus
+ for high OVERSAMPLE a higher RESOLUTION should be used. */
+ __IO uint32_t SAMPLERATE; /*!< Controls normal or continuous sample rate */
+ __I uint32_t RESERVED6[12];
+ SAADC_RESULT_Type RESULT; /*!< RESULT EasyDMA channel */
+} NRF_SAADC_Type;
+
+
+/* ================================================================================ */
+/* ================ TIMER ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Timer/Counter 0 (TIMER)
+ */
+
+typedef struct { /*!< TIMER Structure */
+ __O uint32_t TASKS_START; /*!< Start Timer */
+ __O uint32_t TASKS_STOP; /*!< Stop Timer */
+ __O uint32_t TASKS_COUNT; /*!< Increment Timer (Counter mode only) */
+ __O uint32_t TASKS_CLEAR; /*!< Clear time */
+ __O uint32_t TASKS_SHUTDOWN; /*!< Deprecated register - Shut down timer */
+ __I uint32_t RESERVED0[11];
+ __O uint32_t TASKS_CAPTURE[6]; /*!< Description collection[0]: Capture Timer value to CC[0] register */
+ __I uint32_t RESERVED1[58];
+ __IO uint32_t EVENTS_COMPARE[6]; /*!< Description collection[0]: Compare event on CC[0] match */
+ __I uint32_t RESERVED2[42];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED3[64];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED4[126];
+ __IO uint32_t MODE; /*!< Timer mode selection */
+ __IO uint32_t BITMODE; /*!< Configure the number of bits used by the TIMER */
+ __I uint32_t RESERVED5;
+ __IO uint32_t PRESCALER; /*!< Timer prescaler register */
+ __I uint32_t RESERVED6[11];
+ __IO uint32_t CC[6]; /*!< Description collection[0]: Capture/Compare register 0 */
+} NRF_TIMER_Type;
+
+
+/* ================================================================================ */
+/* ================ RTC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Real time counter 0 (RTC)
+ */
+
+typedef struct { /*!< RTC Structure */
+ __O uint32_t TASKS_START; /*!< Start RTC COUNTER */
+ __O uint32_t TASKS_STOP; /*!< Stop RTC COUNTER */
+ __O uint32_t TASKS_CLEAR; /*!< Clear RTC COUNTER */
+ __O uint32_t TASKS_TRIGOVRFLW; /*!< Set COUNTER to 0xFFFFF0 */
+ __I uint32_t RESERVED0[60];
+ __IO uint32_t EVENTS_TICK; /*!< Event on COUNTER increment */
+ __IO uint32_t EVENTS_OVRFLW; /*!< Event on COUNTER overflow */
+ __I uint32_t RESERVED1[14];
+ __IO uint32_t EVENTS_COMPARE[4]; /*!< Description collection[0]: Compare event on CC[0] match */
+ __I uint32_t RESERVED2[109];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED3[13];
+ __IO uint32_t EVTEN; /*!< Enable or disable event routing */
+ __IO uint32_t EVTENSET; /*!< Enable event routing */
+ __IO uint32_t EVTENCLR; /*!< Disable event routing */
+ __I uint32_t RESERVED4[110];
+ __I uint32_t COUNTER; /*!< Current COUNTER value */
+ __IO uint32_t PRESCALER; /*!< 12 bit prescaler for COUNTER frequency (32768/(PRESCALER+1)).Must
+ be written when RTC is stopped */
+ __I uint32_t RESERVED5[13];
+ __IO uint32_t CC[4]; /*!< Description collection[0]: Compare register 0 */
+} NRF_RTC_Type;
+
+
+/* ================================================================================ */
+/* ================ TEMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Temperature Sensor (TEMP)
+ */
+
+typedef struct { /*!< TEMP Structure */
+ __O uint32_t TASKS_START; /*!< Start temperature measurement */
+ __O uint32_t TASKS_STOP; /*!< Stop temperature measurement */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_DATARDY; /*!< Temperature measurement complete, data ready */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED2[127];
+ __I int32_t TEMP; /*!< Temperature in degC (0.25deg steps) */
+ __I uint32_t RESERVED3[5];
+ __IO uint32_t A0; /*!< Slope of 1st piece wise linear function */
+ __IO uint32_t A1; /*!< Slope of 2nd piece wise linear function */
+ __IO uint32_t A2; /*!< Slope of 3rd piece wise linear function */
+ __IO uint32_t A3; /*!< Slope of 4th piece wise linear function */
+ __IO uint32_t A4; /*!< Slope of 5th piece wise linear function */
+ __IO uint32_t A5; /*!< Slope of 6th piece wise linear function */
+ __I uint32_t RESERVED4[2];
+ __IO uint32_t B0; /*!< y-intercept of 1st piece wise linear function */
+ __IO uint32_t B1; /*!< y-intercept of 2nd piece wise linear function */
+ __IO uint32_t B2; /*!< y-intercept of 3rd piece wise linear function */
+ __IO uint32_t B3; /*!< y-intercept of 4th piece wise linear function */
+ __IO uint32_t B4; /*!< y-intercept of 5th piece wise linear function */
+ __IO uint32_t B5; /*!< y-intercept of 6th piece wise linear function */
+ __I uint32_t RESERVED5[2];
+ __IO uint32_t T0; /*!< End point of 1st piece wise linear function */
+ __IO uint32_t T1; /*!< End point of 2nd piece wise linear function */
+ __IO uint32_t T2; /*!< End point of 3rd piece wise linear function */
+ __IO uint32_t T3; /*!< End point of 4th piece wise linear function */
+ __IO uint32_t T4; /*!< End point of 5th piece wise linear function */
+} NRF_TEMP_Type;
+
+
+/* ================================================================================ */
+/* ================ RNG ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Random Number Generator (RNG)
+ */
+
+typedef struct { /*!< RNG Structure */
+ __O uint32_t TASKS_START; /*!< Task starting the random number generator */
+ __O uint32_t TASKS_STOP; /*!< Task stopping the random number generator */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_VALRDY; /*!< Event being generated for every new random number written to
+ the VALUE register */
+ __I uint32_t RESERVED1[63];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED3[126];
+ __IO uint32_t CONFIG; /*!< Configuration register */
+ __I uint32_t VALUE; /*!< Output random number */
+} NRF_RNG_Type;
+
+
+/* ================================================================================ */
+/* ================ ECB ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AES ECB Mode Encryption (ECB)
+ */
+
+typedef struct { /*!< ECB Structure */
+ __O uint32_t TASKS_STARTECB; /*!< Start ECB block encrypt */
+ __O uint32_t TASKS_STOPECB; /*!< Abort a possible executing ECB operation */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_ENDECB; /*!< ECB block encrypt complete */
+ __IO uint32_t EVENTS_ERRORECB; /*!< ECB block encrypt aborted because of a STOPECB task or due to
+ an error */
+ __I uint32_t RESERVED1[127];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t ECBDATAPTR; /*!< ECB block encrypt memory pointers */
+} NRF_ECB_Type;
+
+
+/* ================================================================================ */
+/* ================ CCM ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AES CCM Mode Encryption (CCM)
+ */
+
+typedef struct { /*!< CCM Structure */
+ __O uint32_t TASKS_KSGEN; /*!< Start generation of key-stream. This operation will stop by
+ itself when completed. */
+ __O uint32_t TASKS_CRYPT; /*!< Start encryption/decryption. This operation will stop by itself
+ when completed. */
+ __O uint32_t TASKS_STOP; /*!< Stop encryption/decryption */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_ENDKSGEN; /*!< Key-stream generation complete */
+ __IO uint32_t EVENTS_ENDCRYPT; /*!< Encrypt/decrypt complete */
+ __IO uint32_t EVENTS_ERROR; /*!< CCM error event */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t MICSTATUS; /*!< MIC check result */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable */
+ __IO uint32_t MODE; /*!< Operation mode */
+ __IO uint32_t CNFPTR; /*!< Pointer to data structure holding AES key and NONCE vector */
+ __IO uint32_t INPTR; /*!< Input pointer */
+ __IO uint32_t OUTPTR; /*!< Output pointer */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to data area used for temporary storage */
+} NRF_CCM_Type;
+
+
+/* ================================================================================ */
+/* ================ AAR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Accelerated Address Resolver (AAR)
+ */
+
+typedef struct { /*!< AAR Structure */
+ __O uint32_t TASKS_START; /*!< Start resolving addresses based on IRKs specified in the IRK
+ data structure */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STOP; /*!< Stop resolving addresses */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t EVENTS_END; /*!< Address resolution procedure complete */
+ __IO uint32_t EVENTS_RESOLVED; /*!< Address resolved */
+ __IO uint32_t EVENTS_NOTRESOLVED; /*!< Address not resolved */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t STATUS; /*!< Resolution status */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable AAR */
+ __IO uint32_t NIRK; /*!< Number of IRKs */
+ __IO uint32_t IRKPTR; /*!< Pointer to IRK data structure */
+ __I uint32_t RESERVED5;
+ __IO uint32_t ADDRPTR; /*!< Pointer to the resolvable address */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to data area used for temporary storage */
+} NRF_AAR_Type;
+
+
+/* ================================================================================ */
+/* ================ WDT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Watchdog Timer (WDT)
+ */
+
+typedef struct { /*!< WDT Structure */
+ __O uint32_t TASKS_START; /*!< Start the watchdog */
+ __I uint32_t RESERVED0[63];
+ __IO uint32_t EVENTS_TIMEOUT; /*!< Watchdog timeout */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED2[61];
+ __I uint32_t RUNSTATUS; /*!< Run status */
+ __I uint32_t REQSTATUS; /*!< Request status */
+ __I uint32_t RESERVED3[63];
+ __IO uint32_t CRV; /*!< Counter reload value */
+ __IO uint32_t RREN; /*!< Enable register for reload request registers */
+ __IO uint32_t CONFIG; /*!< Configuration register */
+ __I uint32_t RESERVED4[60];
+ __O uint32_t RR[8]; /*!< Description collection[0]: Reload request 0 */
+} NRF_WDT_Type;
+
+
+/* ================================================================================ */
+/* ================ QDEC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Quadrature Decoder (QDEC)
+ */
+
+typedef struct { /*!< QDEC Structure */
+ __O uint32_t TASKS_START; /*!< Task starting the quadrature decoder */
+ __O uint32_t TASKS_STOP; /*!< Task stopping the quadrature decoder */
+ __O uint32_t TASKS_READCLRACC; /*!< Read and clear ACC and ACCDBL */
+ __O uint32_t TASKS_RDCLRACC; /*!< Read and clear ACC */
+ __O uint32_t TASKS_RDCLRDBL; /*!< Read and clear ACCDBL */
+ __I uint32_t RESERVED0[59];
+ __IO uint32_t EVENTS_SAMPLERDY; /*!< Event being generated for every new sample value written to
+ the SAMPLE register */
+ __IO uint32_t EVENTS_REPORTRDY; /*!< Non-null report ready */
+ __IO uint32_t EVENTS_ACCOF; /*!< ACC or ACCDBL register overflow */
+ __IO uint32_t EVENTS_DBLRDY; /*!< Double displacement(s) detected */
+ __IO uint32_t EVENTS_STOPPED; /*!< QDEC has been stopped */
+ __I uint32_t RESERVED1[59];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED3[125];
+ __IO uint32_t ENABLE; /*!< Enable the quadrature decoder */
+ __IO uint32_t LEDPOL; /*!< LED output pin polarity */
+ __IO uint32_t SAMPLEPER; /*!< Sample period */
+ __I int32_t SAMPLE; /*!< Motion sample value */
+ __IO uint32_t REPORTPER; /*!< Number of samples to be taken before REPORTRDY and DBLRDY events
+ can be generated */
+ __I int32_t ACC; /*!< Register accumulating the valid transitions */
+ __I int32_t ACCREAD; /*!< Snapshot of the ACC register, updated by the READCLRACC or RDCLRACC
+ task */
+ QDEC_PSEL_Type PSEL; /*!< Unspecified */
+ __IO uint32_t DBFEN; /*!< Enable input debounce filters */
+ __I uint32_t RESERVED4[5];
+ __IO uint32_t LEDPRE; /*!< Time period the LED is switched ON prior to sampling */
+ __I uint32_t ACCDBL; /*!< Register accumulating the number of detected double transitions */
+ __I uint32_t ACCDBLREAD; /*!< Snapshot of the ACCDBL, updated by the READCLRACC or RDCLRDBL
+ task */
+} NRF_QDEC_Type;
+
+
+/* ================================================================================ */
+/* ================ COMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Comparator (COMP)
+ */
+
+typedef struct { /*!< COMP Structure */
+ __O uint32_t TASKS_START; /*!< Start comparator */
+ __O uint32_t TASKS_STOP; /*!< Stop comparator */
+ __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_READY; /*!< COMP is ready and output is valid */
+ __IO uint32_t EVENTS_DOWN; /*!< Downward crossing */
+ __IO uint32_t EVENTS_UP; /*!< Upward crossing */
+ __IO uint32_t EVENTS_CROSS; /*!< Downward or upward crossing */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED2[63];
+ __IO uint32_t INTEN; /*!< Enable or disable interrupt */
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t RESULT; /*!< Compare result */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< COMP enable */
+ __IO uint32_t PSEL; /*!< Pin select */
+ __IO uint32_t REFSEL; /*!< Reference source select */
+ __IO uint32_t EXTREFSEL; /*!< External reference select */
+ __I uint32_t RESERVED5[8];
+ __IO uint32_t TH; /*!< Threshold configuration for hysteresis unit */
+ __IO uint32_t MODE; /*!< Mode configuration */
+ __IO uint32_t HYST; /*!< Comparator hysteresis enable */
+ __IO uint32_t ISOURCE; /*!< Current source select on analog input */
+} NRF_COMP_Type;
+
+
+/* ================================================================================ */
+/* ================ LPCOMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Low Power Comparator (LPCOMP)
+ */
+
+typedef struct { /*!< LPCOMP Structure */
+ __O uint32_t TASKS_START; /*!< Start comparator */
+ __O uint32_t TASKS_STOP; /*!< Stop comparator */
+ __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_READY; /*!< LPCOMP is ready and output is valid */
+ __IO uint32_t EVENTS_DOWN; /*!< Downward crossing */
+ __IO uint32_t EVENTS_UP; /*!< Upward crossing */
+ __IO uint32_t EVENTS_CROSS; /*!< Downward or upward crossing */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t RESULT; /*!< Compare result */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable LPCOMP */
+ __IO uint32_t PSEL; /*!< Input pin select */
+ __IO uint32_t REFSEL; /*!< Reference select */
+ __IO uint32_t EXTREFSEL; /*!< External reference select */
+ __I uint32_t RESERVED5[4];
+ __IO uint32_t ANADETECT; /*!< Analog detect configuration */
+ __I uint32_t RESERVED6[5];
+ __IO uint32_t HYST; /*!< Comparator hysteresis enable */
+} NRF_LPCOMP_Type;
+
+
+/* ================================================================================ */
+/* ================ SWI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Software interrupt 0 (SWI)
+ */
+
+typedef struct { /*!< SWI Structure */
+ __I uint32_t UNUSED; /*!< Unused. */
+} NRF_SWI_Type;
+
+
+/* ================================================================================ */
+/* ================ EGU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Event Generator Unit 0 (EGU)
+ */
+
+typedef struct { /*!< EGU Structure */
+ __O uint32_t TASKS_TRIGGER[16]; /*!< Description collection[0]: Trigger 0 for triggering the corresponding
+ TRIGGERED[0] event */
+ __I uint32_t RESERVED0[48];
+ __IO uint32_t EVENTS_TRIGGERED[16]; /*!< Description collection[0]: Event number 0 generated by triggering
+ the corresponding TRIGGER[0] task */
+ __I uint32_t RESERVED1[112];
+ __IO uint32_t INTEN; /*!< Enable or disable interrupt */
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+} NRF_EGU_Type;
+
+
+/* ================================================================================ */
+/* ================ PWM ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Pulse Width Modulation Unit 0 (PWM)
+ */
+
+typedef struct { /*!< PWM Structure */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STOP; /*!< Stops PWM pulse generation on all channels at the end of current
+ PWM period, and stops sequence playback */
+ __O uint32_t TASKS_SEQSTART[2]; /*!< Description collection[0]: Loads the first PWM value on all
+ enabled channels from sequence 0, and starts playing that sequence
+ at the rate defined in SEQ[0]REFRESH and/or DECODER.MODE. Causes
+ PWM generation to start it was not running. */
+ __O uint32_t TASKS_NEXTSTEP; /*!< Steps by one value in the current sequence on all enabled channels
+ if DECODER.MODE=NextStep. Does not cause PWM generation to start
+ it was not running. */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t EVENTS_STOPPED; /*!< Response to STOP task, emitted when PWM pulses are no longer
+ generated */
+ __IO uint32_t EVENTS_SEQSTARTED[2]; /*!< Description collection[0]: First PWM period started on sequence
+ 0 */
+ __IO uint32_t EVENTS_SEQEND[2]; /*!< Description collection[0]: Emitted at end of every sequence
+ 0, when last value from RAM has been applied to wave counter */
+ __IO uint32_t EVENTS_PWMPERIODEND; /*!< Emitted at the end of each PWM period */
+ __IO uint32_t EVENTS_LOOPSDONE; /*!< Concatenated sequences have been played the amount of times
+ defined in LOOP.CNT */
+ __I uint32_t RESERVED2[56];
+ __IO uint32_t SHORTS; /*!< Shortcut register */
+ __I uint32_t RESERVED3[63];
+ __IO uint32_t INTEN; /*!< Enable or disable interrupt */
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED4[125];
+ __IO uint32_t ENABLE; /*!< PWM module enable register */
+ __IO uint32_t MODE; /*!< Selects operating mode of the wave counter */
+ __IO uint32_t COUNTERTOP; /*!< Value up to which the pulse generator counter counts */
+ __IO uint32_t PRESCALER; /*!< Configuration for PWM_CLK */
+ __IO uint32_t DECODER; /*!< Configuration of the decoder */
+ __IO uint32_t LOOP; /*!< Amount of playback of a loop */
+ __I uint32_t RESERVED5[2];
+ PWM_SEQ_Type SEQ[2]; /*!< Unspecified */
+ PWM_PSEL_Type PSEL; /*!< Unspecified */
+} NRF_PWM_Type;
+
+
+/* ================================================================================ */
+/* ================ PDM ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Pulse Density Modulation (Digital Microphone) Interface (PDM)
+ */
+
+typedef struct { /*!< PDM Structure */
+ __O uint32_t TASKS_START; /*!< Starts continuous PDM transfer */
+ __O uint32_t TASKS_STOP; /*!< Stops PDM transfer */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_STARTED; /*!< PDM transfer has started */
+ __IO uint32_t EVENTS_STOPPED; /*!< PDM transfer has finished */
+ __IO uint32_t EVENTS_END; /*!< The PDM has written the last sample specified by SAMPLE.MAXCNT
+ (or the last sample after a STOP task has been received) to
+ Data RAM */
+ __I uint32_t RESERVED1[125];
+ __IO uint32_t INTEN; /*!< Enable or disable interrupt */
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED2[125];
+ __IO uint32_t ENABLE; /*!< PDM module enable register */
+ __IO uint32_t PDMCLKCTRL; /*!< PDM clock generator control */
+ __IO uint32_t MODE; /*!< Defines the routing of the connected PDM microphones' signals */
+ __I uint32_t RESERVED3[3];
+ __IO uint32_t GAINL; /*!< Left output gain adjustment */
+ __IO uint32_t GAINR; /*!< Right output gain adjustment */
+ __I uint32_t RESERVED4[8];
+ PDM_PSEL_Type PSEL; /*!< Unspecified */
+ __I uint32_t RESERVED5[6];
+ PDM_SAMPLE_Type SAMPLE; /*!< Unspecified */
+} NRF_PDM_Type;
+
+
+/* ================================================================================ */
+/* ================ NVMC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Non Volatile Memory Controller (NVMC)
+ */
+
+typedef struct { /*!< NVMC Structure */
+ __I uint32_t RESERVED0[256];
+ __I uint32_t READY; /*!< Ready flag */
+ __I uint32_t RESERVED1[64];
+ __IO uint32_t CONFIG; /*!< Configuration register */
+
+ union {
+ __IO uint32_t ERASEPCR1; /*!< Deprecated register - Register for erasing a page in Code area.
+ Equivalent to ERASEPAGE. */
+ __IO uint32_t ERASEPAGE; /*!< Register for erasing a page in Code area */
+ };
+ __IO uint32_t ERASEALL; /*!< Register for erasing all non-volatile user memory */
+ __IO uint32_t ERASEPCR0; /*!< Deprecated register - Register for erasing a page in Code area.
+ Equivalent to ERASEPAGE. */
+ __IO uint32_t ERASEUICR; /*!< Register for erasing User Information Configuration Registers */
+ __I uint32_t RESERVED2[10];
+ __IO uint32_t ICACHECNF; /*!< I-Code cache configuration register. */
+ __I uint32_t RESERVED3;
+ __IO uint32_t IHIT; /*!< I-Code cache hit counter. */
+ __IO uint32_t IMISS; /*!< I-Code cache miss counter. */
+} NRF_NVMC_Type;
+
+
+/* ================================================================================ */
+/* ================ PPI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Programmable Peripheral Interconnect (PPI)
+ */
+
+typedef struct { /*!< PPI Structure */
+ PPI_TASKS_CHG_Type TASKS_CHG[6]; /*!< Channel group tasks */
+ __I uint32_t RESERVED0[308];
+ __IO uint32_t CHEN; /*!< Channel enable register */
+ __IO uint32_t CHENSET; /*!< Channel enable set register */
+ __IO uint32_t CHENCLR; /*!< Channel enable clear register */
+ __I uint32_t RESERVED1;
+ PPI_CH_Type CH[20]; /*!< PPI Channel */
+ __I uint32_t RESERVED2[148];
+ __IO uint32_t CHG[6]; /*!< Description collection[0]: Channel group 0 */
+ __I uint32_t RESERVED3[62];
+ PPI_FORK_Type FORK[32]; /*!< Fork */
+} NRF_PPI_Type;
+
+
+/* ================================================================================ */
+/* ================ MWU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Memory Watch Unit (MWU)
+ */
+
+typedef struct { /*!< MWU Structure */
+ __I uint32_t RESERVED0[64];
+ MWU_EVENTS_REGION_Type EVENTS_REGION[4]; /*!< Unspecified */
+ __I uint32_t RESERVED1[16];
+ MWU_EVENTS_PREGION_Type EVENTS_PREGION[2]; /*!< Unspecified */
+ __I uint32_t RESERVED2[100];
+ __IO uint32_t INTEN; /*!< Enable or disable interrupt */
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED3[5];
+ __IO uint32_t NMIEN; /*!< Enable or disable non-maskable interrupt */
+ __IO uint32_t NMIENSET; /*!< Enable non-maskable interrupt */
+ __IO uint32_t NMIENCLR; /*!< Disable non-maskable interrupt */
+ __I uint32_t RESERVED4[53];
+ MWU_PERREGION_Type PERREGION[2]; /*!< Unspecified */
+ __I uint32_t RESERVED5[64];
+ __IO uint32_t REGIONEN; /*!< Enable/disable regions watch */
+ __IO uint32_t REGIONENSET; /*!< Enable regions watch */
+ __IO uint32_t REGIONENCLR; /*!< Disable regions watch */
+ __I uint32_t RESERVED6[57];
+ MWU_REGION_Type REGION[4]; /*!< Unspecified */
+ __I uint32_t RESERVED7[32];
+ MWU_PREGION_Type PREGION[2]; /*!< Unspecified */
+} NRF_MWU_Type;
+
+
+/* ================================================================================ */
+/* ================ I2S ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Inter-IC Sound (I2S)
+ */
+
+typedef struct { /*!< I2S Structure */
+ __O uint32_t TASKS_START; /*!< Starts continuous I2S transfer. Also starts MCK generator when
+ this is enabled. */
+ __O uint32_t TASKS_STOP; /*!< Stops I2S transfer. Also stops MCK generator. Triggering this
+ task will cause the {event:STOPPED} event to be generated. */
+ __I uint32_t RESERVED0[63];
+ __IO uint32_t EVENTS_RXPTRUPD; /*!< The RXD.PTR register has been copied to internal double-buffers.
+ When the I2S module is started and RX is enabled, this event
+ will be generated for every RXTXD.MAXCNT words that are received
+ on the SDIN pin. */
+ __IO uint32_t EVENTS_STOPPED; /*!< I2S transfer stopped. */
+ __I uint32_t RESERVED1[2];
+ __IO uint32_t EVENTS_TXPTRUPD; /*!< The TDX.PTR register has been copied to internal double-buffers.
+ When the I2S module is started and TX is enabled, this event
+ will be generated for every RXTXD.MAXCNT words that are sent
+ on the SDOUT pin. */
+ __I uint32_t RESERVED2[122];
+ __IO uint32_t INTEN; /*!< Enable or disable interrupt */
+ __IO uint32_t INTENSET; /*!< Enable interrupt */
+ __IO uint32_t INTENCLR; /*!< Disable interrupt */
+ __I uint32_t RESERVED3[125];
+ __IO uint32_t ENABLE; /*!< Enable I2S module. */
+ I2S_CONFIG_Type CONFIG; /*!< Unspecified */
+ __I uint32_t RESERVED4[3];
+ I2S_RXD_Type RXD; /*!< Unspecified */
+ __I uint32_t RESERVED5;
+ I2S_TXD_Type TXD; /*!< Unspecified */
+ __I uint32_t RESERVED6[3];
+ I2S_RXTXD_Type RXTXD; /*!< Unspecified */
+ __I uint32_t RESERVED7[3];
+ I2S_PSEL_Type PSEL; /*!< Unspecified */
+} NRF_I2S_Type;
+
+
+/* ================================================================================ */
+/* ================ FPU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief FPU (FPU)
+ */
+
+typedef struct { /*!< FPU Structure */
+ __I uint32_t UNUSED; /*!< Unused. */
+} NRF_FPU_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIO ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief GPIO Port 1 (GPIO)
+ */
+
+typedef struct { /*!< GPIO Structure */
+ __I uint32_t RESERVED0[321];
+ __IO uint32_t OUT; /*!< Write GPIO port */
+ __IO uint32_t OUTSET; /*!< Set individual bits in GPIO port */
+ __IO uint32_t OUTCLR; /*!< Clear individual bits in GPIO port */
+ __I uint32_t IN; /*!< Read GPIO port */
+ __IO uint32_t DIR; /*!< Direction of GPIO pins */
+ __IO uint32_t DIRSET; /*!< DIR set register */
+ __IO uint32_t DIRCLR; /*!< DIR clear register */
+ __IO uint32_t LATCH; /*!< Latch register indicating what GPIO pins that have met the criteria
+ set in the PIN_CNF[n].SENSE registers */
+ __IO uint32_t DETECTMODE; /*!< Select between default DETECT signal behaviour and LDETECT mode */
+ __I uint32_t RESERVED1[118];
+ __IO uint32_t PIN_CNF[32]; /*!< Description collection[0]: Configuration of GPIO pins */
+} NRF_GPIO_Type;
+
+
+/* -------------------- End of section using anonymous unions ------------------- */
+#if defined(__CC_ARM)
+ #pragma pop
+#elif defined(__ICCARM__)
+ /* leave anonymous unions enabled */
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning restore
+#else
+ #warning Not supported compiler type
+#endif
+
+
+
+
+/* ================================================================================ */
+/* ================ Peripheral memory map ================ */
+/* ================================================================================ */
+
+#define NRF_FICR_BASE 0x10000000UL
+#define NRF_UICR_BASE 0x10001000UL
+#define NRF_BPROT_BASE 0x40000000UL
+#define NRF_POWER_BASE 0x40000000UL
+#define NRF_CLOCK_BASE 0x40000000UL
+#define NRF_AMLI_BASE 0x40000000UL
+#define NRF_RADIO_BASE 0x40001000UL
+#define NRF_UARTE0_BASE 0x40002000UL
+#define NRF_UART0_BASE 0x40002000UL
+#define NRF_SPIM0_BASE 0x40003000UL
+#define NRF_SPIS0_BASE 0x40003000UL
+#define NRF_TWIM0_BASE 0x40003000UL
+#define NRF_TWIS0_BASE 0x40003000UL
+#define NRF_SPI0_BASE 0x40003000UL
+#define NRF_TWI0_BASE 0x40003000UL
+#define NRF_SPIM1_BASE 0x40004000UL
+#define NRF_SPIS1_BASE 0x40004000UL
+#define NRF_TWIM1_BASE 0x40004000UL
+#define NRF_TWIS1_BASE 0x40004000UL
+#define NRF_SPI1_BASE 0x40004000UL
+#define NRF_TWI1_BASE 0x40004000UL
+#define NRF_NFCT_BASE 0x40005000UL
+#define NRF_GPIOTE_BASE 0x40006000UL
+#define NRF_SAADC_BASE 0x40007000UL
+#define NRF_TIMER0_BASE 0x40008000UL
+#define NRF_TIMER1_BASE 0x40009000UL
+#define NRF_TIMER2_BASE 0x4000A000UL
+#define NRF_RTC0_BASE 0x4000B000UL
+#define NRF_TEMP_BASE 0x4000C000UL
+#define NRF_RNG_BASE 0x4000D000UL
+#define NRF_ECB_BASE 0x4000E000UL
+#define NRF_CCM_BASE 0x4000F000UL
+#define NRF_AAR_BASE 0x4000F000UL
+#define NRF_WDT_BASE 0x40010000UL
+#define NRF_RTC1_BASE 0x40011000UL
+#define NRF_QDEC_BASE 0x40012000UL
+#define NRF_COMP_BASE 0x40013000UL
+#define NRF_LPCOMP_BASE 0x40013000UL
+#define NRF_SWI0_BASE 0x40014000UL
+#define NRF_EGU0_BASE 0x40014000UL
+#define NRF_SWI1_BASE 0x40015000UL
+#define NRF_EGU1_BASE 0x40015000UL
+#define NRF_SWI2_BASE 0x40016000UL
+#define NRF_EGU2_BASE 0x40016000UL
+#define NRF_SWI3_BASE 0x40017000UL
+#define NRF_EGU3_BASE 0x40017000UL
+#define NRF_SWI4_BASE 0x40018000UL
+#define NRF_EGU4_BASE 0x40018000UL
+#define NRF_SWI5_BASE 0x40019000UL
+#define NRF_EGU5_BASE 0x40019000UL
+#define NRF_TIMER3_BASE 0x4001A000UL
+#define NRF_TIMER4_BASE 0x4001B000UL
+#define NRF_PWM0_BASE 0x4001C000UL
+#define NRF_PDM_BASE 0x4001D000UL
+#define NRF_NVMC_BASE 0x4001E000UL
+#define NRF_PPI_BASE 0x4001F000UL
+#define NRF_MWU_BASE 0x40020000UL
+#define NRF_PWM1_BASE 0x40021000UL
+#define NRF_PWM2_BASE 0x40022000UL
+#define NRF_SPIM2_BASE 0x40023000UL
+#define NRF_SPIS2_BASE 0x40023000UL
+#define NRF_SPI2_BASE 0x40023000UL
+#define NRF_RTC2_BASE 0x40024000UL
+#define NRF_I2S_BASE 0x40025000UL
+#define NRF_FPU_BASE 0x40026000UL
+#define NRF_P0_BASE 0x50000000UL
+
+
+/* ================================================================================ */
+/* ================ Peripheral declaration ================ */
+/* ================================================================================ */
+
+#define NRF_FICR ((NRF_FICR_Type *) NRF_FICR_BASE)
+#define NRF_UICR ((NRF_UICR_Type *) NRF_UICR_BASE)
+#define NRF_BPROT ((NRF_BPROT_Type *) NRF_BPROT_BASE)
+#define NRF_POWER ((NRF_POWER_Type *) NRF_POWER_BASE)
+#define NRF_CLOCK ((NRF_CLOCK_Type *) NRF_CLOCK_BASE)
+#define NRF_AMLI ((NRF_AMLI_Type *) NRF_AMLI_BASE)
+#define NRF_RADIO ((NRF_RADIO_Type *) NRF_RADIO_BASE)
+#define NRF_UARTE0 ((NRF_UARTE_Type *) NRF_UARTE0_BASE)
+#define NRF_UART0 ((NRF_UART_Type *) NRF_UART0_BASE)
+#define NRF_SPIM0 ((NRF_SPIM_Type *) NRF_SPIM0_BASE)
+#define NRF_SPIS0 ((NRF_SPIS_Type *) NRF_SPIS0_BASE)
+#define NRF_TWIM0 ((NRF_TWIM_Type *) NRF_TWIM0_BASE)
+#define NRF_TWIS0 ((NRF_TWIS_Type *) NRF_TWIS0_BASE)
+#define NRF_SPI0 ((NRF_SPI_Type *) NRF_SPI0_BASE)
+#define NRF_TWI0 ((NRF_TWI_Type *) NRF_TWI0_BASE)
+#define NRF_SPIM1 ((NRF_SPIM_Type *) NRF_SPIM1_BASE)
+#define NRF_SPIS1 ((NRF_SPIS_Type *) NRF_SPIS1_BASE)
+#define NRF_TWIM1 ((NRF_TWIM_Type *) NRF_TWIM1_BASE)
+#define NRF_TWIS1 ((NRF_TWIS_Type *) NRF_TWIS1_BASE)
+#define NRF_SPI1 ((NRF_SPI_Type *) NRF_SPI1_BASE)
+#define NRF_TWI1 ((NRF_TWI_Type *) NRF_TWI1_BASE)
+#define NRF_NFCT ((NRF_NFCT_Type *) NRF_NFCT_BASE)
+#define NRF_GPIOTE ((NRF_GPIOTE_Type *) NRF_GPIOTE_BASE)
+#define NRF_SAADC ((NRF_SAADC_Type *) NRF_SAADC_BASE)
+#define NRF_TIMER0 ((NRF_TIMER_Type *) NRF_TIMER0_BASE)
+#define NRF_TIMER1 ((NRF_TIMER_Type *) NRF_TIMER1_BASE)
+#define NRF_TIMER2 ((NRF_TIMER_Type *) NRF_TIMER2_BASE)
+#define NRF_RTC0 ((NRF_RTC_Type *) NRF_RTC0_BASE)
+#define NRF_TEMP ((NRF_TEMP_Type *) NRF_TEMP_BASE)
+#define NRF_RNG ((NRF_RNG_Type *) NRF_RNG_BASE)
+#define NRF_ECB ((NRF_ECB_Type *) NRF_ECB_BASE)
+#define NRF_CCM ((NRF_CCM_Type *) NRF_CCM_BASE)
+#define NRF_AAR ((NRF_AAR_Type *) NRF_AAR_BASE)
+#define NRF_WDT ((NRF_WDT_Type *) NRF_WDT_BASE)
+#define NRF_RTC1 ((NRF_RTC_Type *) NRF_RTC1_BASE)
+#define NRF_QDEC ((NRF_QDEC_Type *) NRF_QDEC_BASE)
+#define NRF_COMP ((NRF_COMP_Type *) NRF_COMP_BASE)
+#define NRF_LPCOMP ((NRF_LPCOMP_Type *) NRF_LPCOMP_BASE)
+#define NRF_SWI0 ((NRF_SWI_Type *) NRF_SWI0_BASE)
+#define NRF_EGU0 ((NRF_EGU_Type *) NRF_EGU0_BASE)
+#define NRF_SWI1 ((NRF_SWI_Type *) NRF_SWI1_BASE)
+#define NRF_EGU1 ((NRF_EGU_Type *) NRF_EGU1_BASE)
+#define NRF_SWI2 ((NRF_SWI_Type *) NRF_SWI2_BASE)
+#define NRF_EGU2 ((NRF_EGU_Type *) NRF_EGU2_BASE)
+#define NRF_SWI3 ((NRF_SWI_Type *) NRF_SWI3_BASE)
+#define NRF_EGU3 ((NRF_EGU_Type *) NRF_EGU3_BASE)
+#define NRF_SWI4 ((NRF_SWI_Type *) NRF_SWI4_BASE)
+#define NRF_EGU4 ((NRF_EGU_Type *) NRF_EGU4_BASE)
+#define NRF_SWI5 ((NRF_SWI_Type *) NRF_SWI5_BASE)
+#define NRF_EGU5 ((NRF_EGU_Type *) NRF_EGU5_BASE)
+#define NRF_TIMER3 ((NRF_TIMER_Type *) NRF_TIMER3_BASE)
+#define NRF_TIMER4 ((NRF_TIMER_Type *) NRF_TIMER4_BASE)
+#define NRF_PWM0 ((NRF_PWM_Type *) NRF_PWM0_BASE)
+#define NRF_PDM ((NRF_PDM_Type *) NRF_PDM_BASE)
+#define NRF_NVMC ((NRF_NVMC_Type *) NRF_NVMC_BASE)
+#define NRF_PPI ((NRF_PPI_Type *) NRF_PPI_BASE)
+#define NRF_MWU ((NRF_MWU_Type *) NRF_MWU_BASE)
+#define NRF_PWM1 ((NRF_PWM_Type *) NRF_PWM1_BASE)
+#define NRF_PWM2 ((NRF_PWM_Type *) NRF_PWM2_BASE)
+#define NRF_SPIM2 ((NRF_SPIM_Type *) NRF_SPIM2_BASE)
+#define NRF_SPIS2 ((NRF_SPIS_Type *) NRF_SPIS2_BASE)
+#define NRF_SPI2 ((NRF_SPI_Type *) NRF_SPI2_BASE)
+#define NRF_RTC2 ((NRF_RTC_Type *) NRF_RTC2_BASE)
+#define NRF_I2S ((NRF_I2S_Type *) NRF_I2S_BASE)
+#define NRF_FPU ((NRF_FPU_Type *) NRF_FPU_BASE)
+#define NRF_P0 ((NRF_GPIO_Type *) NRF_P0_BASE)
+
+
+/** @} */ /* End of group Device_Peripheral_Registers */
+/** @} */ /* End of group nrf52 */
+/** @} */ /* End of group Nordic Semiconductor */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* nrf52_H */
+
diff --git a/os/hal/ports/NRF5/NRF52832/nrf52_bitfields.h b/os/hal/ports/NRF5/NRF52832/nrf52_bitfields.h new file mode 100644 index 0000000..ae959d4 --- /dev/null +++ b/os/hal/ports/NRF5/NRF52832/nrf52_bitfields.h @@ -0,0 +1,14861 @@ +/* Copyright (c) 2015, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Nordic Semiconductor ASA nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef __NRF52_BITS_H
+#define __NRF52_BITS_H
+
+/*lint ++flb "Enter library region" */
+
+/* Peripheral: AAR */
+/* Description: Accelerated Address Resolver */
+
+/* Register: AAR_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 2 : Write '1' to Enable interrupt for NOTRESOLVED event */
+#define AAR_INTENSET_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */
+#define AAR_INTENSET_NOTRESOLVED_Msk (0x1UL << AAR_INTENSET_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */
+#define AAR_INTENSET_NOTRESOLVED_Disabled (0UL) /*!< Read: Disabled */
+#define AAR_INTENSET_NOTRESOLVED_Enabled (1UL) /*!< Read: Enabled */
+#define AAR_INTENSET_NOTRESOLVED_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for RESOLVED event */
+#define AAR_INTENSET_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */
+#define AAR_INTENSET_RESOLVED_Msk (0x1UL << AAR_INTENSET_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */
+#define AAR_INTENSET_RESOLVED_Disabled (0UL) /*!< Read: Disabled */
+#define AAR_INTENSET_RESOLVED_Enabled (1UL) /*!< Read: Enabled */
+#define AAR_INTENSET_RESOLVED_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for END event */
+#define AAR_INTENSET_END_Pos (0UL) /*!< Position of END field. */
+#define AAR_INTENSET_END_Msk (0x1UL << AAR_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define AAR_INTENSET_END_Disabled (0UL) /*!< Read: Disabled */
+#define AAR_INTENSET_END_Enabled (1UL) /*!< Read: Enabled */
+#define AAR_INTENSET_END_Set (1UL) /*!< Enable */
+
+/* Register: AAR_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 2 : Write '1' to Disable interrupt for NOTRESOLVED event */
+#define AAR_INTENCLR_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */
+#define AAR_INTENCLR_NOTRESOLVED_Msk (0x1UL << AAR_INTENCLR_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */
+#define AAR_INTENCLR_NOTRESOLVED_Disabled (0UL) /*!< Read: Disabled */
+#define AAR_INTENCLR_NOTRESOLVED_Enabled (1UL) /*!< Read: Enabled */
+#define AAR_INTENCLR_NOTRESOLVED_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for RESOLVED event */
+#define AAR_INTENCLR_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */
+#define AAR_INTENCLR_RESOLVED_Msk (0x1UL << AAR_INTENCLR_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */
+#define AAR_INTENCLR_RESOLVED_Disabled (0UL) /*!< Read: Disabled */
+#define AAR_INTENCLR_RESOLVED_Enabled (1UL) /*!< Read: Enabled */
+#define AAR_INTENCLR_RESOLVED_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for END event */
+#define AAR_INTENCLR_END_Pos (0UL) /*!< Position of END field. */
+#define AAR_INTENCLR_END_Msk (0x1UL << AAR_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define AAR_INTENCLR_END_Disabled (0UL) /*!< Read: Disabled */
+#define AAR_INTENCLR_END_Enabled (1UL) /*!< Read: Enabled */
+#define AAR_INTENCLR_END_Clear (1UL) /*!< Disable */
+
+/* Register: AAR_STATUS */
+/* Description: Resolution status */
+
+/* Bits 3..0 : The IRK that was used last time an address was resolved */
+#define AAR_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */
+#define AAR_STATUS_STATUS_Msk (0xFUL << AAR_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */
+
+/* Register: AAR_ENABLE */
+/* Description: Enable AAR */
+
+/* Bits 1..0 : Enable or disable AAR */
+#define AAR_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define AAR_ENABLE_ENABLE_Msk (0x3UL << AAR_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define AAR_ENABLE_ENABLE_Disabled (0UL) /*!< Disable */
+#define AAR_ENABLE_ENABLE_Enabled (3UL) /*!< Enable */
+
+/* Register: AAR_NIRK */
+/* Description: Number of IRKs */
+
+/* Bits 4..0 : Number of Identity root keys available in the IRK data structure */
+#define AAR_NIRK_NIRK_Pos (0UL) /*!< Position of NIRK field. */
+#define AAR_NIRK_NIRK_Msk (0x1FUL << AAR_NIRK_NIRK_Pos) /*!< Bit mask of NIRK field. */
+
+/* Register: AAR_IRKPTR */
+/* Description: Pointer to IRK data structure */
+
+/* Bits 31..0 : Pointer to the IRK data structure */
+#define AAR_IRKPTR_IRKPTR_Pos (0UL) /*!< Position of IRKPTR field. */
+#define AAR_IRKPTR_IRKPTR_Msk (0xFFFFFFFFUL << AAR_IRKPTR_IRKPTR_Pos) /*!< Bit mask of IRKPTR field. */
+
+/* Register: AAR_ADDRPTR */
+/* Description: Pointer to the resolvable address */
+
+/* Bits 31..0 : Pointer to the resolvable address (6-bytes) */
+#define AAR_ADDRPTR_ADDRPTR_Pos (0UL) /*!< Position of ADDRPTR field. */
+#define AAR_ADDRPTR_ADDRPTR_Msk (0xFFFFFFFFUL << AAR_ADDRPTR_ADDRPTR_Pos) /*!< Bit mask of ADDRPTR field. */
+
+/* Register: AAR_SCRATCHPTR */
+/* Description: Pointer to data area used for temporary storage */
+
+/* Bits 31..0 : Pointer to a scratch data area used for temporary storage during resolution.A space of minimum 3 bytes must be reserved. */
+#define AAR_SCRATCHPTR_SCRATCHPTR_Pos (0UL) /*!< Position of SCRATCHPTR field. */
+#define AAR_SCRATCHPTR_SCRATCHPTR_Msk (0xFFFFFFFFUL << AAR_SCRATCHPTR_SCRATCHPTR_Pos) /*!< Bit mask of SCRATCHPTR field. */
+
+
+/* Peripheral: AMLI */
+/* Description: AHB Multi-Layer Interface */
+
+/* Register: AMLI_RAMPRI_CPU0 */
+/* Description: AHB bus master priority register for CPU0 */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_CPU0_RAM7_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_CPU0_RAM6_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_CPU0_RAM5_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_CPU0_RAM4_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_CPU0_RAM3_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_CPU0_RAM2_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_CPU0_RAM1_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_CPU0_RAM0_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+/* Register: AMLI_RAMPRI_SPIS1 */
+/* Description: AHB bus master priority register for SPIM1, SPIS1, TWIM1 and TWIS1 */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+/* Register: AMLI_RAMPRI_RADIO */
+/* Description: AHB bus master priority register for RADIO */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_RADIO_RAM7_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_RADIO_RAM6_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_RADIO_RAM5_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_RADIO_RAM4_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_RADIO_RAM3_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_RADIO_RAM2_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_RADIO_RAM1_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_RADIO_RAM0_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+/* Register: AMLI_RAMPRI_ECB */
+/* Description: AHB bus master priority register for ECB */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_ECB_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_ECB_RAM7_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_ECB_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_ECB_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_ECB_RAM6_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_ECB_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_ECB_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_ECB_RAM5_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_ECB_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_ECB_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_ECB_RAM4_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_ECB_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_ECB_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_ECB_RAM3_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_ECB_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_ECB_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_ECB_RAM2_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_ECB_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_ECB_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_ECB_RAM1_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_ECB_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_ECB_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_ECB_RAM0_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_ECB_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+/* Register: AMLI_RAMPRI_CCM */
+/* Description: AHB bus master priority register for CCM */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_CCM_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_CCM_RAM7_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CCM_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_CCM_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_CCM_RAM6_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CCM_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_CCM_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_CCM_RAM5_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CCM_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_CCM_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_CCM_RAM4_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CCM_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_CCM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_CCM_RAM3_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CCM_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_CCM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_CCM_RAM2_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CCM_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_CCM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_CCM_RAM1_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CCM_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_CCM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_CCM_RAM0_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_CCM_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+/* Register: AMLI_RAMPRI_AAR */
+/* Description: AHB bus master priority register for AAR */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_AAR_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_AAR_RAM7_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_AAR_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_AAR_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_AAR_RAM6_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_AAR_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_AAR_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_AAR_RAM5_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_AAR_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_AAR_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_AAR_RAM4_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_AAR_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_AAR_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_AAR_RAM3_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_AAR_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_AAR_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_AAR_RAM2_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_AAR_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_AAR_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_AAR_RAM1_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_AAR_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_AAR_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_AAR_RAM0_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_AAR_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+/* Register: AMLI_RAMPRI_SAADC */
+/* Description: AHB bus master priority register for SAADC */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_SAADC_RAM7_Msk (0xFUL << AMLI_RAMPRI_SAADC_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SAADC_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_SAADC_RAM6_Msk (0xFUL << AMLI_RAMPRI_SAADC_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SAADC_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_SAADC_RAM5_Msk (0xFUL << AMLI_RAMPRI_SAADC_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SAADC_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_SAADC_RAM4_Msk (0xFUL << AMLI_RAMPRI_SAADC_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SAADC_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_SAADC_RAM3_Msk (0xFUL << AMLI_RAMPRI_SAADC_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SAADC_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_SAADC_RAM2_Msk (0xFUL << AMLI_RAMPRI_SAADC_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SAADC_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_SAADC_RAM1_Msk (0xFUL << AMLI_RAMPRI_SAADC_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SAADC_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_SAADC_RAM0_Msk (0xFUL << AMLI_RAMPRI_SAADC_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SAADC_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+/* Register: AMLI_RAMPRI_UARTE */
+/* Description: AHB bus master priority register for UARTE */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_UARTE_RAM7_Msk (0xFUL << AMLI_RAMPRI_UARTE_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_UARTE_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_UARTE_RAM6_Msk (0xFUL << AMLI_RAMPRI_UARTE_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_UARTE_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_UARTE_RAM5_Msk (0xFUL << AMLI_RAMPRI_UARTE_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_UARTE_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_UARTE_RAM4_Msk (0xFUL << AMLI_RAMPRI_UARTE_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_UARTE_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_UARTE_RAM3_Msk (0xFUL << AMLI_RAMPRI_UARTE_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_UARTE_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_UARTE_RAM2_Msk (0xFUL << AMLI_RAMPRI_UARTE_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_UARTE_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_UARTE_RAM1_Msk (0xFUL << AMLI_RAMPRI_UARTE_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_UARTE_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_UARTE_RAM0_Msk (0xFUL << AMLI_RAMPRI_UARTE_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_UARTE_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+/* Register: AMLI_RAMPRI_SERIAL0 */
+/* Description: AHB bus master priority register for SPIM0, SPIS0, TWIM0 and TWIS0 */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Msk (0xFUL << AMLI_RAMPRI_SERIAL0_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL0_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Msk (0xFUL << AMLI_RAMPRI_SERIAL0_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL0_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Msk (0xFUL << AMLI_RAMPRI_SERIAL0_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL0_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Msk (0xFUL << AMLI_RAMPRI_SERIAL0_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL0_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Msk (0xFUL << AMLI_RAMPRI_SERIAL0_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL0_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Msk (0xFUL << AMLI_RAMPRI_SERIAL0_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL0_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Msk (0xFUL << AMLI_RAMPRI_SERIAL0_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL0_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Msk (0xFUL << AMLI_RAMPRI_SERIAL0_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL0_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+/* Register: AMLI_RAMPRI_SERIAL2 */
+/* Description: AHB bus master priority register for SPIM2 and SPIS2 */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Msk (0xFUL << AMLI_RAMPRI_SERIAL2_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL2_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Msk (0xFUL << AMLI_RAMPRI_SERIAL2_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL2_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Msk (0xFUL << AMLI_RAMPRI_SERIAL2_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL2_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Msk (0xFUL << AMLI_RAMPRI_SERIAL2_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL2_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Msk (0xFUL << AMLI_RAMPRI_SERIAL2_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL2_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Msk (0xFUL << AMLI_RAMPRI_SERIAL2_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL2_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Msk (0xFUL << AMLI_RAMPRI_SERIAL2_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL2_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Msk (0xFUL << AMLI_RAMPRI_SERIAL2_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_SERIAL2_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+/* Register: AMLI_RAMPRI_NFCT */
+/* Description: AHB bus master priority register for NFCT */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_NFCT_RAM7_Msk (0xFUL << AMLI_RAMPRI_NFCT_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_NFCT_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_NFCT_RAM6_Msk (0xFUL << AMLI_RAMPRI_NFCT_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_NFCT_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_NFCT_RAM5_Msk (0xFUL << AMLI_RAMPRI_NFCT_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_NFCT_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_NFCT_RAM4_Msk (0xFUL << AMLI_RAMPRI_NFCT_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_NFCT_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_NFCT_RAM3_Msk (0xFUL << AMLI_RAMPRI_NFCT_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_NFCT_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_NFCT_RAM2_Msk (0xFUL << AMLI_RAMPRI_NFCT_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_NFCT_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_NFCT_RAM1_Msk (0xFUL << AMLI_RAMPRI_NFCT_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_NFCT_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_NFCT_RAM0_Msk (0xFUL << AMLI_RAMPRI_NFCT_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_NFCT_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+/* Register: AMLI_RAMPRI_I2S */
+/* Description: AHB bus master priority register for I2S */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_I2S_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_I2S_RAM7_Msk (0xFUL << AMLI_RAMPRI_I2S_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_I2S_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_I2S_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_I2S_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_I2S_RAM6_Msk (0xFUL << AMLI_RAMPRI_I2S_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_I2S_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_I2S_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_I2S_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_I2S_RAM5_Msk (0xFUL << AMLI_RAMPRI_I2S_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_I2S_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_I2S_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_I2S_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_I2S_RAM4_Msk (0xFUL << AMLI_RAMPRI_I2S_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_I2S_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_I2S_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_I2S_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_I2S_RAM3_Msk (0xFUL << AMLI_RAMPRI_I2S_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_I2S_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_I2S_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_I2S_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_I2S_RAM2_Msk (0xFUL << AMLI_RAMPRI_I2S_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_I2S_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_I2S_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_I2S_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_I2S_RAM1_Msk (0xFUL << AMLI_RAMPRI_I2S_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_I2S_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_I2S_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_I2S_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_I2S_RAM0_Msk (0xFUL << AMLI_RAMPRI_I2S_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_I2S_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_I2S_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+/* Register: AMLI_RAMPRI_PDM */
+/* Description: AHB bus master priority register for PDM */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_PDM_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_PDM_RAM7_Msk (0xFUL << AMLI_RAMPRI_PDM_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_PDM_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PDM_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_PDM_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_PDM_RAM6_Msk (0xFUL << AMLI_RAMPRI_PDM_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_PDM_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PDM_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_PDM_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_PDM_RAM5_Msk (0xFUL << AMLI_RAMPRI_PDM_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_PDM_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PDM_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_PDM_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_PDM_RAM4_Msk (0xFUL << AMLI_RAMPRI_PDM_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_PDM_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PDM_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_PDM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_PDM_RAM3_Msk (0xFUL << AMLI_RAMPRI_PDM_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_PDM_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PDM_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_PDM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_PDM_RAM2_Msk (0xFUL << AMLI_RAMPRI_PDM_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_PDM_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PDM_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_PDM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_PDM_RAM1_Msk (0xFUL << AMLI_RAMPRI_PDM_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_PDM_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PDM_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_PDM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_PDM_RAM0_Msk (0xFUL << AMLI_RAMPRI_PDM_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_PDM_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PDM_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+/* Register: AMLI_RAMPRI_PWM */
+/* Description: AHB bus master priority register for PWM0, PWM1 and PWM2 */
+
+/* Bits 31..28 : Priority register for RAM AHB slave 7 */
+#define AMLI_RAMPRI_PWM_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_PWM_RAM7_Msk (0xFUL << AMLI_RAMPRI_PWM_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_PWM_RAM7_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PWM_RAM7_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 27..24 : Priority register for RAM AHB slave 6 */
+#define AMLI_RAMPRI_PWM_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_PWM_RAM6_Msk (0xFUL << AMLI_RAMPRI_PWM_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_PWM_RAM6_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PWM_RAM6_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 23..20 : Priority register for RAM AHB slave 5 */
+#define AMLI_RAMPRI_PWM_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_PWM_RAM5_Msk (0xFUL << AMLI_RAMPRI_PWM_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_PWM_RAM5_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PWM_RAM5_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 19..16 : Priority register for RAM AHB slave 4 */
+#define AMLI_RAMPRI_PWM_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_PWM_RAM4_Msk (0xFUL << AMLI_RAMPRI_PWM_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_PWM_RAM4_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PWM_RAM4_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 15..12 : Priority register for RAM AHB slave 3 */
+#define AMLI_RAMPRI_PWM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_PWM_RAM3_Msk (0xFUL << AMLI_RAMPRI_PWM_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_PWM_RAM3_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PWM_RAM3_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 11..8 : Priority register for RAM AHB slave 2 */
+#define AMLI_RAMPRI_PWM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_PWM_RAM2_Msk (0xFUL << AMLI_RAMPRI_PWM_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_PWM_RAM2_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PWM_RAM2_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 7..4 : Priority register for RAM AHB slave 1 */
+#define AMLI_RAMPRI_PWM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_PWM_RAM1_Msk (0xFUL << AMLI_RAMPRI_PWM_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_PWM_RAM1_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PWM_RAM1_Pri15 (15UL) /*!< Priority 15 */
+
+/* Bits 3..0 : Priority register for RAM AHB slave 0 */
+#define AMLI_RAMPRI_PWM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_PWM_RAM0_Msk (0xFUL << AMLI_RAMPRI_PWM_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_PWM_RAM0_Pri0 (0UL) /*!< Priority 0 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri1 (1UL) /*!< Priority 1 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri2 (2UL) /*!< Priority 2 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri3 (3UL) /*!< Priority 3 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri4 (4UL) /*!< Priority 4 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri5 (5UL) /*!< Priority 5 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri6 (6UL) /*!< Priority 6 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri7 (7UL) /*!< Priority 7 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri8 (8UL) /*!< Priority 8 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri9 (9UL) /*!< Priority 9 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri10 (10UL) /*!< Priority 10 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri11 (11UL) /*!< Priority 11 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri12 (12UL) /*!< Priority 12 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri13 (13UL) /*!< Priority 13 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri14 (14UL) /*!< Priority 14 */
+#define AMLI_RAMPRI_PWM_RAM0_Pri15 (15UL) /*!< Priority 15 */
+
+
+/* Peripheral: BPROT */
+/* Description: Block Protect */
+
+/* Register: BPROT_CONFIG0 */
+/* Description: Block protect configuration register 0 */
+
+/* Bit 31 : Enable protection for region 31. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION31_Pos (31UL) /*!< Position of REGION31 field. */
+#define BPROT_CONFIG0_REGION31_Msk (0x1UL << BPROT_CONFIG0_REGION31_Pos) /*!< Bit mask of REGION31 field. */
+#define BPROT_CONFIG0_REGION31_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION31_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 30 : Enable protection for region 30. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION30_Pos (30UL) /*!< Position of REGION30 field. */
+#define BPROT_CONFIG0_REGION30_Msk (0x1UL << BPROT_CONFIG0_REGION30_Pos) /*!< Bit mask of REGION30 field. */
+#define BPROT_CONFIG0_REGION30_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION30_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 29 : Enable protection for region 29. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION29_Pos (29UL) /*!< Position of REGION29 field. */
+#define BPROT_CONFIG0_REGION29_Msk (0x1UL << BPROT_CONFIG0_REGION29_Pos) /*!< Bit mask of REGION29 field. */
+#define BPROT_CONFIG0_REGION29_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION29_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 28 : Enable protection for region 28. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION28_Pos (28UL) /*!< Position of REGION28 field. */
+#define BPROT_CONFIG0_REGION28_Msk (0x1UL << BPROT_CONFIG0_REGION28_Pos) /*!< Bit mask of REGION28 field. */
+#define BPROT_CONFIG0_REGION28_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION28_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 27 : Enable protection for region 27. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION27_Pos (27UL) /*!< Position of REGION27 field. */
+#define BPROT_CONFIG0_REGION27_Msk (0x1UL << BPROT_CONFIG0_REGION27_Pos) /*!< Bit mask of REGION27 field. */
+#define BPROT_CONFIG0_REGION27_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION27_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 26 : Enable protection for region 26. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION26_Pos (26UL) /*!< Position of REGION26 field. */
+#define BPROT_CONFIG0_REGION26_Msk (0x1UL << BPROT_CONFIG0_REGION26_Pos) /*!< Bit mask of REGION26 field. */
+#define BPROT_CONFIG0_REGION26_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION26_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 25 : Enable protection for region 25. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION25_Pos (25UL) /*!< Position of REGION25 field. */
+#define BPROT_CONFIG0_REGION25_Msk (0x1UL << BPROT_CONFIG0_REGION25_Pos) /*!< Bit mask of REGION25 field. */
+#define BPROT_CONFIG0_REGION25_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION25_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 24 : Enable protection for region 24. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION24_Pos (24UL) /*!< Position of REGION24 field. */
+#define BPROT_CONFIG0_REGION24_Msk (0x1UL << BPROT_CONFIG0_REGION24_Pos) /*!< Bit mask of REGION24 field. */
+#define BPROT_CONFIG0_REGION24_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION24_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 23 : Enable protection for region 23. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION23_Pos (23UL) /*!< Position of REGION23 field. */
+#define BPROT_CONFIG0_REGION23_Msk (0x1UL << BPROT_CONFIG0_REGION23_Pos) /*!< Bit mask of REGION23 field. */
+#define BPROT_CONFIG0_REGION23_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION23_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 22 : Enable protection for region 22. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION22_Pos (22UL) /*!< Position of REGION22 field. */
+#define BPROT_CONFIG0_REGION22_Msk (0x1UL << BPROT_CONFIG0_REGION22_Pos) /*!< Bit mask of REGION22 field. */
+#define BPROT_CONFIG0_REGION22_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION22_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 21 : Enable protection for region 21. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION21_Pos (21UL) /*!< Position of REGION21 field. */
+#define BPROT_CONFIG0_REGION21_Msk (0x1UL << BPROT_CONFIG0_REGION21_Pos) /*!< Bit mask of REGION21 field. */
+#define BPROT_CONFIG0_REGION21_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION21_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 20 : Enable protection for region 20. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION20_Pos (20UL) /*!< Position of REGION20 field. */
+#define BPROT_CONFIG0_REGION20_Msk (0x1UL << BPROT_CONFIG0_REGION20_Pos) /*!< Bit mask of REGION20 field. */
+#define BPROT_CONFIG0_REGION20_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION20_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 19 : Enable protection for region 19. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION19_Pos (19UL) /*!< Position of REGION19 field. */
+#define BPROT_CONFIG0_REGION19_Msk (0x1UL << BPROT_CONFIG0_REGION19_Pos) /*!< Bit mask of REGION19 field. */
+#define BPROT_CONFIG0_REGION19_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION19_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 18 : Enable protection for region 18. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION18_Pos (18UL) /*!< Position of REGION18 field. */
+#define BPROT_CONFIG0_REGION18_Msk (0x1UL << BPROT_CONFIG0_REGION18_Pos) /*!< Bit mask of REGION18 field. */
+#define BPROT_CONFIG0_REGION18_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION18_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 17 : Enable protection for region 17. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION17_Pos (17UL) /*!< Position of REGION17 field. */
+#define BPROT_CONFIG0_REGION17_Msk (0x1UL << BPROT_CONFIG0_REGION17_Pos) /*!< Bit mask of REGION17 field. */
+#define BPROT_CONFIG0_REGION17_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION17_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 16 : Enable protection for region 16. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION16_Pos (16UL) /*!< Position of REGION16 field. */
+#define BPROT_CONFIG0_REGION16_Msk (0x1UL << BPROT_CONFIG0_REGION16_Pos) /*!< Bit mask of REGION16 field. */
+#define BPROT_CONFIG0_REGION16_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION16_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 15 : Enable protection for region 15. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION15_Pos (15UL) /*!< Position of REGION15 field. */
+#define BPROT_CONFIG0_REGION15_Msk (0x1UL << BPROT_CONFIG0_REGION15_Pos) /*!< Bit mask of REGION15 field. */
+#define BPROT_CONFIG0_REGION15_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION15_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 14 : Enable protection for region 14. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION14_Pos (14UL) /*!< Position of REGION14 field. */
+#define BPROT_CONFIG0_REGION14_Msk (0x1UL << BPROT_CONFIG0_REGION14_Pos) /*!< Bit mask of REGION14 field. */
+#define BPROT_CONFIG0_REGION14_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION14_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 13 : Enable protection for region 13. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION13_Pos (13UL) /*!< Position of REGION13 field. */
+#define BPROT_CONFIG0_REGION13_Msk (0x1UL << BPROT_CONFIG0_REGION13_Pos) /*!< Bit mask of REGION13 field. */
+#define BPROT_CONFIG0_REGION13_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION13_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 12 : Enable protection for region 12. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION12_Pos (12UL) /*!< Position of REGION12 field. */
+#define BPROT_CONFIG0_REGION12_Msk (0x1UL << BPROT_CONFIG0_REGION12_Pos) /*!< Bit mask of REGION12 field. */
+#define BPROT_CONFIG0_REGION12_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION12_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 11 : Enable protection for region 11. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION11_Pos (11UL) /*!< Position of REGION11 field. */
+#define BPROT_CONFIG0_REGION11_Msk (0x1UL << BPROT_CONFIG0_REGION11_Pos) /*!< Bit mask of REGION11 field. */
+#define BPROT_CONFIG0_REGION11_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION11_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 10 : Enable protection for region 10. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION10_Pos (10UL) /*!< Position of REGION10 field. */
+#define BPROT_CONFIG0_REGION10_Msk (0x1UL << BPROT_CONFIG0_REGION10_Pos) /*!< Bit mask of REGION10 field. */
+#define BPROT_CONFIG0_REGION10_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION10_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 9 : Enable protection for region 9. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION9_Pos (9UL) /*!< Position of REGION9 field. */
+#define BPROT_CONFIG0_REGION9_Msk (0x1UL << BPROT_CONFIG0_REGION9_Pos) /*!< Bit mask of REGION9 field. */
+#define BPROT_CONFIG0_REGION9_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION9_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 8 : Enable protection for region 8. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION8_Pos (8UL) /*!< Position of REGION8 field. */
+#define BPROT_CONFIG0_REGION8_Msk (0x1UL << BPROT_CONFIG0_REGION8_Pos) /*!< Bit mask of REGION8 field. */
+#define BPROT_CONFIG0_REGION8_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION8_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 7 : Enable protection for region 7. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION7_Pos (7UL) /*!< Position of REGION7 field. */
+#define BPROT_CONFIG0_REGION7_Msk (0x1UL << BPROT_CONFIG0_REGION7_Pos) /*!< Bit mask of REGION7 field. */
+#define BPROT_CONFIG0_REGION7_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION7_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 6 : Enable protection for region 6. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION6_Pos (6UL) /*!< Position of REGION6 field. */
+#define BPROT_CONFIG0_REGION6_Msk (0x1UL << BPROT_CONFIG0_REGION6_Pos) /*!< Bit mask of REGION6 field. */
+#define BPROT_CONFIG0_REGION6_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION6_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 5 : Enable protection for region 5. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION5_Pos (5UL) /*!< Position of REGION5 field. */
+#define BPROT_CONFIG0_REGION5_Msk (0x1UL << BPROT_CONFIG0_REGION5_Pos) /*!< Bit mask of REGION5 field. */
+#define BPROT_CONFIG0_REGION5_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION5_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 4 : Enable protection for region 4. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION4_Pos (4UL) /*!< Position of REGION4 field. */
+#define BPROT_CONFIG0_REGION4_Msk (0x1UL << BPROT_CONFIG0_REGION4_Pos) /*!< Bit mask of REGION4 field. */
+#define BPROT_CONFIG0_REGION4_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION4_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 3 : Enable protection for region 3. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION3_Pos (3UL) /*!< Position of REGION3 field. */
+#define BPROT_CONFIG0_REGION3_Msk (0x1UL << BPROT_CONFIG0_REGION3_Pos) /*!< Bit mask of REGION3 field. */
+#define BPROT_CONFIG0_REGION3_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION3_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 2 : Enable protection for region 2. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION2_Pos (2UL) /*!< Position of REGION2 field. */
+#define BPROT_CONFIG0_REGION2_Msk (0x1UL << BPROT_CONFIG0_REGION2_Pos) /*!< Bit mask of REGION2 field. */
+#define BPROT_CONFIG0_REGION2_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION2_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 1 : Enable protection for region 1. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION1_Pos (1UL) /*!< Position of REGION1 field. */
+#define BPROT_CONFIG0_REGION1_Msk (0x1UL << BPROT_CONFIG0_REGION1_Pos) /*!< Bit mask of REGION1 field. */
+#define BPROT_CONFIG0_REGION1_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION1_Enabled (1UL) /*!< Protection enable */
+
+/* Bit 0 : Enable protection for region 0. Write '0' has no effect. */
+#define BPROT_CONFIG0_REGION0_Pos (0UL) /*!< Position of REGION0 field. */
+#define BPROT_CONFIG0_REGION0_Msk (0x1UL << BPROT_CONFIG0_REGION0_Pos) /*!< Bit mask of REGION0 field. */
+#define BPROT_CONFIG0_REGION0_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG0_REGION0_Enabled (1UL) /*!< Protection enable */
+
+/* Register: BPROT_CONFIG1 */
+/* Description: Block protect configuration register 1 */
+
+/* Bit 31 : Enable protection for region 63. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION63_Pos (31UL) /*!< Position of REGION63 field. */
+#define BPROT_CONFIG1_REGION63_Msk (0x1UL << BPROT_CONFIG1_REGION63_Pos) /*!< Bit mask of REGION63 field. */
+#define BPROT_CONFIG1_REGION63_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION63_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 30 : Enable protection for region 62. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION62_Pos (30UL) /*!< Position of REGION62 field. */
+#define BPROT_CONFIG1_REGION62_Msk (0x1UL << BPROT_CONFIG1_REGION62_Pos) /*!< Bit mask of REGION62 field. */
+#define BPROT_CONFIG1_REGION62_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION62_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 29 : Enable protection for region 61. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION61_Pos (29UL) /*!< Position of REGION61 field. */
+#define BPROT_CONFIG1_REGION61_Msk (0x1UL << BPROT_CONFIG1_REGION61_Pos) /*!< Bit mask of REGION61 field. */
+#define BPROT_CONFIG1_REGION61_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION61_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 28 : Enable protection for region 60. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION60_Pos (28UL) /*!< Position of REGION60 field. */
+#define BPROT_CONFIG1_REGION60_Msk (0x1UL << BPROT_CONFIG1_REGION60_Pos) /*!< Bit mask of REGION60 field. */
+#define BPROT_CONFIG1_REGION60_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION60_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 27 : Enable protection for region 59. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION59_Pos (27UL) /*!< Position of REGION59 field. */
+#define BPROT_CONFIG1_REGION59_Msk (0x1UL << BPROT_CONFIG1_REGION59_Pos) /*!< Bit mask of REGION59 field. */
+#define BPROT_CONFIG1_REGION59_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION59_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 26 : Enable protection for region 58. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION58_Pos (26UL) /*!< Position of REGION58 field. */
+#define BPROT_CONFIG1_REGION58_Msk (0x1UL << BPROT_CONFIG1_REGION58_Pos) /*!< Bit mask of REGION58 field. */
+#define BPROT_CONFIG1_REGION58_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION58_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 25 : Enable protection for region 57. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION57_Pos (25UL) /*!< Position of REGION57 field. */
+#define BPROT_CONFIG1_REGION57_Msk (0x1UL << BPROT_CONFIG1_REGION57_Pos) /*!< Bit mask of REGION57 field. */
+#define BPROT_CONFIG1_REGION57_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION57_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 24 : Enable protection for region 56. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION56_Pos (24UL) /*!< Position of REGION56 field. */
+#define BPROT_CONFIG1_REGION56_Msk (0x1UL << BPROT_CONFIG1_REGION56_Pos) /*!< Bit mask of REGION56 field. */
+#define BPROT_CONFIG1_REGION56_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION56_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 23 : Enable protection for region 55. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION55_Pos (23UL) /*!< Position of REGION55 field. */
+#define BPROT_CONFIG1_REGION55_Msk (0x1UL << BPROT_CONFIG1_REGION55_Pos) /*!< Bit mask of REGION55 field. */
+#define BPROT_CONFIG1_REGION55_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION55_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 22 : Enable protection for region 54. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION54_Pos (22UL) /*!< Position of REGION54 field. */
+#define BPROT_CONFIG1_REGION54_Msk (0x1UL << BPROT_CONFIG1_REGION54_Pos) /*!< Bit mask of REGION54 field. */
+#define BPROT_CONFIG1_REGION54_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION54_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 21 : Enable protection for region 53. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION53_Pos (21UL) /*!< Position of REGION53 field. */
+#define BPROT_CONFIG1_REGION53_Msk (0x1UL << BPROT_CONFIG1_REGION53_Pos) /*!< Bit mask of REGION53 field. */
+#define BPROT_CONFIG1_REGION53_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION53_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 20 : Enable protection for region 52. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION52_Pos (20UL) /*!< Position of REGION52 field. */
+#define BPROT_CONFIG1_REGION52_Msk (0x1UL << BPROT_CONFIG1_REGION52_Pos) /*!< Bit mask of REGION52 field. */
+#define BPROT_CONFIG1_REGION52_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION52_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 19 : Enable protection for region 51. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION51_Pos (19UL) /*!< Position of REGION51 field. */
+#define BPROT_CONFIG1_REGION51_Msk (0x1UL << BPROT_CONFIG1_REGION51_Pos) /*!< Bit mask of REGION51 field. */
+#define BPROT_CONFIG1_REGION51_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION51_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 18 : Enable protection for region 50. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION50_Pos (18UL) /*!< Position of REGION50 field. */
+#define BPROT_CONFIG1_REGION50_Msk (0x1UL << BPROT_CONFIG1_REGION50_Pos) /*!< Bit mask of REGION50 field. */
+#define BPROT_CONFIG1_REGION50_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION50_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 17 : Enable protection for region 49. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION49_Pos (17UL) /*!< Position of REGION49 field. */
+#define BPROT_CONFIG1_REGION49_Msk (0x1UL << BPROT_CONFIG1_REGION49_Pos) /*!< Bit mask of REGION49 field. */
+#define BPROT_CONFIG1_REGION49_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION49_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 16 : Enable protection for region 48. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION48_Pos (16UL) /*!< Position of REGION48 field. */
+#define BPROT_CONFIG1_REGION48_Msk (0x1UL << BPROT_CONFIG1_REGION48_Pos) /*!< Bit mask of REGION48 field. */
+#define BPROT_CONFIG1_REGION48_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION48_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 15 : Enable protection for region 47. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION47_Pos (15UL) /*!< Position of REGION47 field. */
+#define BPROT_CONFIG1_REGION47_Msk (0x1UL << BPROT_CONFIG1_REGION47_Pos) /*!< Bit mask of REGION47 field. */
+#define BPROT_CONFIG1_REGION47_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION47_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 14 : Enable protection for region 46. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION46_Pos (14UL) /*!< Position of REGION46 field. */
+#define BPROT_CONFIG1_REGION46_Msk (0x1UL << BPROT_CONFIG1_REGION46_Pos) /*!< Bit mask of REGION46 field. */
+#define BPROT_CONFIG1_REGION46_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION46_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 13 : Enable protection for region 45. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION45_Pos (13UL) /*!< Position of REGION45 field. */
+#define BPROT_CONFIG1_REGION45_Msk (0x1UL << BPROT_CONFIG1_REGION45_Pos) /*!< Bit mask of REGION45 field. */
+#define BPROT_CONFIG1_REGION45_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION45_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 12 : Enable protection for region 44. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION44_Pos (12UL) /*!< Position of REGION44 field. */
+#define BPROT_CONFIG1_REGION44_Msk (0x1UL << BPROT_CONFIG1_REGION44_Pos) /*!< Bit mask of REGION44 field. */
+#define BPROT_CONFIG1_REGION44_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION44_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 11 : Enable protection for region 43. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION43_Pos (11UL) /*!< Position of REGION43 field. */
+#define BPROT_CONFIG1_REGION43_Msk (0x1UL << BPROT_CONFIG1_REGION43_Pos) /*!< Bit mask of REGION43 field. */
+#define BPROT_CONFIG1_REGION43_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION43_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 10 : Enable protection for region 42. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION42_Pos (10UL) /*!< Position of REGION42 field. */
+#define BPROT_CONFIG1_REGION42_Msk (0x1UL << BPROT_CONFIG1_REGION42_Pos) /*!< Bit mask of REGION42 field. */
+#define BPROT_CONFIG1_REGION42_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION42_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 9 : Enable protection for region 41. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION41_Pos (9UL) /*!< Position of REGION41 field. */
+#define BPROT_CONFIG1_REGION41_Msk (0x1UL << BPROT_CONFIG1_REGION41_Pos) /*!< Bit mask of REGION41 field. */
+#define BPROT_CONFIG1_REGION41_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION41_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 8 : Enable protection for region 40. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION40_Pos (8UL) /*!< Position of REGION40 field. */
+#define BPROT_CONFIG1_REGION40_Msk (0x1UL << BPROT_CONFIG1_REGION40_Pos) /*!< Bit mask of REGION40 field. */
+#define BPROT_CONFIG1_REGION40_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION40_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 7 : Enable protection for region 39. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION39_Pos (7UL) /*!< Position of REGION39 field. */
+#define BPROT_CONFIG1_REGION39_Msk (0x1UL << BPROT_CONFIG1_REGION39_Pos) /*!< Bit mask of REGION39 field. */
+#define BPROT_CONFIG1_REGION39_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION39_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 6 : Enable protection for region 38. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION38_Pos (6UL) /*!< Position of REGION38 field. */
+#define BPROT_CONFIG1_REGION38_Msk (0x1UL << BPROT_CONFIG1_REGION38_Pos) /*!< Bit mask of REGION38 field. */
+#define BPROT_CONFIG1_REGION38_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION38_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 5 : Enable protection for region 37. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION37_Pos (5UL) /*!< Position of REGION37 field. */
+#define BPROT_CONFIG1_REGION37_Msk (0x1UL << BPROT_CONFIG1_REGION37_Pos) /*!< Bit mask of REGION37 field. */
+#define BPROT_CONFIG1_REGION37_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION37_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 4 : Enable protection for region 36. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION36_Pos (4UL) /*!< Position of REGION36 field. */
+#define BPROT_CONFIG1_REGION36_Msk (0x1UL << BPROT_CONFIG1_REGION36_Pos) /*!< Bit mask of REGION36 field. */
+#define BPROT_CONFIG1_REGION36_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION36_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 3 : Enable protection for region 35. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION35_Pos (3UL) /*!< Position of REGION35 field. */
+#define BPROT_CONFIG1_REGION35_Msk (0x1UL << BPROT_CONFIG1_REGION35_Pos) /*!< Bit mask of REGION35 field. */
+#define BPROT_CONFIG1_REGION35_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION35_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 2 : Enable protection for region 34. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION34_Pos (2UL) /*!< Position of REGION34 field. */
+#define BPROT_CONFIG1_REGION34_Msk (0x1UL << BPROT_CONFIG1_REGION34_Pos) /*!< Bit mask of REGION34 field. */
+#define BPROT_CONFIG1_REGION34_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION34_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 1 : Enable protection for region 33. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION33_Pos (1UL) /*!< Position of REGION33 field. */
+#define BPROT_CONFIG1_REGION33_Msk (0x1UL << BPROT_CONFIG1_REGION33_Pos) /*!< Bit mask of REGION33 field. */
+#define BPROT_CONFIG1_REGION33_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION33_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 0 : Enable protection for region 32. Write '0' has no effect. */
+#define BPROT_CONFIG1_REGION32_Pos (0UL) /*!< Position of REGION32 field. */
+#define BPROT_CONFIG1_REGION32_Msk (0x1UL << BPROT_CONFIG1_REGION32_Pos) /*!< Bit mask of REGION32 field. */
+#define BPROT_CONFIG1_REGION32_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG1_REGION32_Enabled (1UL) /*!< Protection enabled */
+
+/* Register: BPROT_DISABLEINDEBUG */
+/* Description: Disable protection mechanism in debug interface mode */
+
+/* Bit 0 : Disable the protection mechanism for NVM regions while in debug interface mode. This register will only disable the protection mechanism if the device is in debug interface mode. */
+#define BPROT_DISABLEINDEBUG_DISABLEINDEBUG_Pos (0UL) /*!< Position of DISABLEINDEBUG field. */
+#define BPROT_DISABLEINDEBUG_DISABLEINDEBUG_Msk (0x1UL << BPROT_DISABLEINDEBUG_DISABLEINDEBUG_Pos) /*!< Bit mask of DISABLEINDEBUG field. */
+#define BPROT_DISABLEINDEBUG_DISABLEINDEBUG_Enabled (0UL) /*!< Enable in debug */
+#define BPROT_DISABLEINDEBUG_DISABLEINDEBUG_Disabled (1UL) /*!< Disable in debug */
+
+/* Register: BPROT_CONFIG2 */
+/* Description: Block protect configuration register 2 */
+
+/* Bit 31 : Enable protection for region 95. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION95_Pos (31UL) /*!< Position of REGION95 field. */
+#define BPROT_CONFIG2_REGION95_Msk (0x1UL << BPROT_CONFIG2_REGION95_Pos) /*!< Bit mask of REGION95 field. */
+#define BPROT_CONFIG2_REGION95_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION95_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 30 : Enable protection for region 94. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION94_Pos (30UL) /*!< Position of REGION94 field. */
+#define BPROT_CONFIG2_REGION94_Msk (0x1UL << BPROT_CONFIG2_REGION94_Pos) /*!< Bit mask of REGION94 field. */
+#define BPROT_CONFIG2_REGION94_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION94_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 29 : Enable protection for region 93. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION93_Pos (29UL) /*!< Position of REGION93 field. */
+#define BPROT_CONFIG2_REGION93_Msk (0x1UL << BPROT_CONFIG2_REGION93_Pos) /*!< Bit mask of REGION93 field. */
+#define BPROT_CONFIG2_REGION93_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION93_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 28 : Enable protection for region 92. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION92_Pos (28UL) /*!< Position of REGION92 field. */
+#define BPROT_CONFIG2_REGION92_Msk (0x1UL << BPROT_CONFIG2_REGION92_Pos) /*!< Bit mask of REGION92 field. */
+#define BPROT_CONFIG2_REGION92_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION92_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 27 : Enable protection for region 91. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION91_Pos (27UL) /*!< Position of REGION91 field. */
+#define BPROT_CONFIG2_REGION91_Msk (0x1UL << BPROT_CONFIG2_REGION91_Pos) /*!< Bit mask of REGION91 field. */
+#define BPROT_CONFIG2_REGION91_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION91_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 26 : Enable protection for region 90. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION90_Pos (26UL) /*!< Position of REGION90 field. */
+#define BPROT_CONFIG2_REGION90_Msk (0x1UL << BPROT_CONFIG2_REGION90_Pos) /*!< Bit mask of REGION90 field. */
+#define BPROT_CONFIG2_REGION90_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION90_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 25 : Enable protection for region 89. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION89_Pos (25UL) /*!< Position of REGION89 field. */
+#define BPROT_CONFIG2_REGION89_Msk (0x1UL << BPROT_CONFIG2_REGION89_Pos) /*!< Bit mask of REGION89 field. */
+#define BPROT_CONFIG2_REGION89_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION89_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 24 : Enable protection for region 88. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION88_Pos (24UL) /*!< Position of REGION88 field. */
+#define BPROT_CONFIG2_REGION88_Msk (0x1UL << BPROT_CONFIG2_REGION88_Pos) /*!< Bit mask of REGION88 field. */
+#define BPROT_CONFIG2_REGION88_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION88_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 23 : Enable protection for region 87. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION87_Pos (23UL) /*!< Position of REGION87 field. */
+#define BPROT_CONFIG2_REGION87_Msk (0x1UL << BPROT_CONFIG2_REGION87_Pos) /*!< Bit mask of REGION87 field. */
+#define BPROT_CONFIG2_REGION87_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION87_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 22 : Enable protection for region 86. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION86_Pos (22UL) /*!< Position of REGION86 field. */
+#define BPROT_CONFIG2_REGION86_Msk (0x1UL << BPROT_CONFIG2_REGION86_Pos) /*!< Bit mask of REGION86 field. */
+#define BPROT_CONFIG2_REGION86_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION86_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 21 : Enable protection for region 85. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION85_Pos (21UL) /*!< Position of REGION85 field. */
+#define BPROT_CONFIG2_REGION85_Msk (0x1UL << BPROT_CONFIG2_REGION85_Pos) /*!< Bit mask of REGION85 field. */
+#define BPROT_CONFIG2_REGION85_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION85_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 20 : Enable protection for region 84. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION84_Pos (20UL) /*!< Position of REGION84 field. */
+#define BPROT_CONFIG2_REGION84_Msk (0x1UL << BPROT_CONFIG2_REGION84_Pos) /*!< Bit mask of REGION84 field. */
+#define BPROT_CONFIG2_REGION84_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION84_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 19 : Enable protection for region 83. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION83_Pos (19UL) /*!< Position of REGION83 field. */
+#define BPROT_CONFIG2_REGION83_Msk (0x1UL << BPROT_CONFIG2_REGION83_Pos) /*!< Bit mask of REGION83 field. */
+#define BPROT_CONFIG2_REGION83_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION83_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 18 : Enable protection for region 82. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION82_Pos (18UL) /*!< Position of REGION82 field. */
+#define BPROT_CONFIG2_REGION82_Msk (0x1UL << BPROT_CONFIG2_REGION82_Pos) /*!< Bit mask of REGION82 field. */
+#define BPROT_CONFIG2_REGION82_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION82_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 17 : Enable protection for region 81. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION81_Pos (17UL) /*!< Position of REGION81 field. */
+#define BPROT_CONFIG2_REGION81_Msk (0x1UL << BPROT_CONFIG2_REGION81_Pos) /*!< Bit mask of REGION81 field. */
+#define BPROT_CONFIG2_REGION81_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION81_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 16 : Enable protection for region 80. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION80_Pos (16UL) /*!< Position of REGION80 field. */
+#define BPROT_CONFIG2_REGION80_Msk (0x1UL << BPROT_CONFIG2_REGION80_Pos) /*!< Bit mask of REGION80 field. */
+#define BPROT_CONFIG2_REGION80_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION80_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 15 : Enable protection for region 79. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION79_Pos (15UL) /*!< Position of REGION79 field. */
+#define BPROT_CONFIG2_REGION79_Msk (0x1UL << BPROT_CONFIG2_REGION79_Pos) /*!< Bit mask of REGION79 field. */
+#define BPROT_CONFIG2_REGION79_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION79_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 14 : Enable protection for region 78. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION78_Pos (14UL) /*!< Position of REGION78 field. */
+#define BPROT_CONFIG2_REGION78_Msk (0x1UL << BPROT_CONFIG2_REGION78_Pos) /*!< Bit mask of REGION78 field. */
+#define BPROT_CONFIG2_REGION78_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION78_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 13 : Enable protection for region 77. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION77_Pos (13UL) /*!< Position of REGION77 field. */
+#define BPROT_CONFIG2_REGION77_Msk (0x1UL << BPROT_CONFIG2_REGION77_Pos) /*!< Bit mask of REGION77 field. */
+#define BPROT_CONFIG2_REGION77_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION77_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 12 : Enable protection for region 76. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION76_Pos (12UL) /*!< Position of REGION76 field. */
+#define BPROT_CONFIG2_REGION76_Msk (0x1UL << BPROT_CONFIG2_REGION76_Pos) /*!< Bit mask of REGION76 field. */
+#define BPROT_CONFIG2_REGION76_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION76_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 11 : Enable protection for region 75. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION75_Pos (11UL) /*!< Position of REGION75 field. */
+#define BPROT_CONFIG2_REGION75_Msk (0x1UL << BPROT_CONFIG2_REGION75_Pos) /*!< Bit mask of REGION75 field. */
+#define BPROT_CONFIG2_REGION75_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION75_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 10 : Enable protection for region 74. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION74_Pos (10UL) /*!< Position of REGION74 field. */
+#define BPROT_CONFIG2_REGION74_Msk (0x1UL << BPROT_CONFIG2_REGION74_Pos) /*!< Bit mask of REGION74 field. */
+#define BPROT_CONFIG2_REGION74_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION74_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 9 : Enable protection for region 73. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION73_Pos (9UL) /*!< Position of REGION73 field. */
+#define BPROT_CONFIG2_REGION73_Msk (0x1UL << BPROT_CONFIG2_REGION73_Pos) /*!< Bit mask of REGION73 field. */
+#define BPROT_CONFIG2_REGION73_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION73_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 8 : Enable protection for region 72. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION72_Pos (8UL) /*!< Position of REGION72 field. */
+#define BPROT_CONFIG2_REGION72_Msk (0x1UL << BPROT_CONFIG2_REGION72_Pos) /*!< Bit mask of REGION72 field. */
+#define BPROT_CONFIG2_REGION72_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION72_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 7 : Enable protection for region 71. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION71_Pos (7UL) /*!< Position of REGION71 field. */
+#define BPROT_CONFIG2_REGION71_Msk (0x1UL << BPROT_CONFIG2_REGION71_Pos) /*!< Bit mask of REGION71 field. */
+#define BPROT_CONFIG2_REGION71_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION71_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 6 : Enable protection for region 70. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION70_Pos (6UL) /*!< Position of REGION70 field. */
+#define BPROT_CONFIG2_REGION70_Msk (0x1UL << BPROT_CONFIG2_REGION70_Pos) /*!< Bit mask of REGION70 field. */
+#define BPROT_CONFIG2_REGION70_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION70_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 5 : Enable protection for region 69. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION69_Pos (5UL) /*!< Position of REGION69 field. */
+#define BPROT_CONFIG2_REGION69_Msk (0x1UL << BPROT_CONFIG2_REGION69_Pos) /*!< Bit mask of REGION69 field. */
+#define BPROT_CONFIG2_REGION69_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION69_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 4 : Enable protection for region 68. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION68_Pos (4UL) /*!< Position of REGION68 field. */
+#define BPROT_CONFIG2_REGION68_Msk (0x1UL << BPROT_CONFIG2_REGION68_Pos) /*!< Bit mask of REGION68 field. */
+#define BPROT_CONFIG2_REGION68_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION68_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 3 : Enable protection for region 67. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION67_Pos (3UL) /*!< Position of REGION67 field. */
+#define BPROT_CONFIG2_REGION67_Msk (0x1UL << BPROT_CONFIG2_REGION67_Pos) /*!< Bit mask of REGION67 field. */
+#define BPROT_CONFIG2_REGION67_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION67_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 2 : Enable protection for region 66. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION66_Pos (2UL) /*!< Position of REGION66 field. */
+#define BPROT_CONFIG2_REGION66_Msk (0x1UL << BPROT_CONFIG2_REGION66_Pos) /*!< Bit mask of REGION66 field. */
+#define BPROT_CONFIG2_REGION66_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION66_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 1 : Enable protection for region 65. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION65_Pos (1UL) /*!< Position of REGION65 field. */
+#define BPROT_CONFIG2_REGION65_Msk (0x1UL << BPROT_CONFIG2_REGION65_Pos) /*!< Bit mask of REGION65 field. */
+#define BPROT_CONFIG2_REGION65_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION65_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 0 : Enable protection for region 64. Write '0' has no effect. */
+#define BPROT_CONFIG2_REGION64_Pos (0UL) /*!< Position of REGION64 field. */
+#define BPROT_CONFIG2_REGION64_Msk (0x1UL << BPROT_CONFIG2_REGION64_Pos) /*!< Bit mask of REGION64 field. */
+#define BPROT_CONFIG2_REGION64_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG2_REGION64_Enabled (1UL) /*!< Protection enabled */
+
+/* Register: BPROT_CONFIG3 */
+/* Description: Block protect configuration register 3 */
+
+/* Bit 31 : Enable protection for region 127. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION127_Pos (31UL) /*!< Position of REGION127 field. */
+#define BPROT_CONFIG3_REGION127_Msk (0x1UL << BPROT_CONFIG3_REGION127_Pos) /*!< Bit mask of REGION127 field. */
+#define BPROT_CONFIG3_REGION127_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION127_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 30 : Enable protection for region 126. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION126_Pos (30UL) /*!< Position of REGION126 field. */
+#define BPROT_CONFIG3_REGION126_Msk (0x1UL << BPROT_CONFIG3_REGION126_Pos) /*!< Bit mask of REGION126 field. */
+#define BPROT_CONFIG3_REGION126_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION126_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 29 : Enable protection for region 125. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION125_Pos (29UL) /*!< Position of REGION125 field. */
+#define BPROT_CONFIG3_REGION125_Msk (0x1UL << BPROT_CONFIG3_REGION125_Pos) /*!< Bit mask of REGION125 field. */
+#define BPROT_CONFIG3_REGION125_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION125_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 28 : Enable protection for region 124. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION124_Pos (28UL) /*!< Position of REGION124 field. */
+#define BPROT_CONFIG3_REGION124_Msk (0x1UL << BPROT_CONFIG3_REGION124_Pos) /*!< Bit mask of REGION124 field. */
+#define BPROT_CONFIG3_REGION124_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION124_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 27 : Enable protection for region 123. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION123_Pos (27UL) /*!< Position of REGION123 field. */
+#define BPROT_CONFIG3_REGION123_Msk (0x1UL << BPROT_CONFIG3_REGION123_Pos) /*!< Bit mask of REGION123 field. */
+#define BPROT_CONFIG3_REGION123_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION123_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 26 : Enable protection for region 122. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION122_Pos (26UL) /*!< Position of REGION122 field. */
+#define BPROT_CONFIG3_REGION122_Msk (0x1UL << BPROT_CONFIG3_REGION122_Pos) /*!< Bit mask of REGION122 field. */
+#define BPROT_CONFIG3_REGION122_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION122_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 25 : Enable protection for region 121. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION121_Pos (25UL) /*!< Position of REGION121 field. */
+#define BPROT_CONFIG3_REGION121_Msk (0x1UL << BPROT_CONFIG3_REGION121_Pos) /*!< Bit mask of REGION121 field. */
+#define BPROT_CONFIG3_REGION121_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION121_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 24 : Enable protection for region 120. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION120_Pos (24UL) /*!< Position of REGION120 field. */
+#define BPROT_CONFIG3_REGION120_Msk (0x1UL << BPROT_CONFIG3_REGION120_Pos) /*!< Bit mask of REGION120 field. */
+#define BPROT_CONFIG3_REGION120_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION120_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 23 : Enable protection for region 119. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION119_Pos (23UL) /*!< Position of REGION119 field. */
+#define BPROT_CONFIG3_REGION119_Msk (0x1UL << BPROT_CONFIG3_REGION119_Pos) /*!< Bit mask of REGION119 field. */
+#define BPROT_CONFIG3_REGION119_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION119_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 22 : Enable protection for region 118. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION118_Pos (22UL) /*!< Position of REGION118 field. */
+#define BPROT_CONFIG3_REGION118_Msk (0x1UL << BPROT_CONFIG3_REGION118_Pos) /*!< Bit mask of REGION118 field. */
+#define BPROT_CONFIG3_REGION118_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION118_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 21 : Enable protection for region 117. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION117_Pos (21UL) /*!< Position of REGION117 field. */
+#define BPROT_CONFIG3_REGION117_Msk (0x1UL << BPROT_CONFIG3_REGION117_Pos) /*!< Bit mask of REGION117 field. */
+#define BPROT_CONFIG3_REGION117_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION117_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 20 : Enable protection for region 116. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION116_Pos (20UL) /*!< Position of REGION116 field. */
+#define BPROT_CONFIG3_REGION116_Msk (0x1UL << BPROT_CONFIG3_REGION116_Pos) /*!< Bit mask of REGION116 field. */
+#define BPROT_CONFIG3_REGION116_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION116_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 19 : Enable protection for region 115. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION115_Pos (19UL) /*!< Position of REGION115 field. */
+#define BPROT_CONFIG3_REGION115_Msk (0x1UL << BPROT_CONFIG3_REGION115_Pos) /*!< Bit mask of REGION115 field. */
+#define BPROT_CONFIG3_REGION115_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION115_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 18 : Enable protection for region 114. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION114_Pos (18UL) /*!< Position of REGION114 field. */
+#define BPROT_CONFIG3_REGION114_Msk (0x1UL << BPROT_CONFIG3_REGION114_Pos) /*!< Bit mask of REGION114 field. */
+#define BPROT_CONFIG3_REGION114_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION114_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 17 : Enable protection for region 113. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION113_Pos (17UL) /*!< Position of REGION113 field. */
+#define BPROT_CONFIG3_REGION113_Msk (0x1UL << BPROT_CONFIG3_REGION113_Pos) /*!< Bit mask of REGION113 field. */
+#define BPROT_CONFIG3_REGION113_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION113_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 16 : Enable protection for region 112. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION112_Pos (16UL) /*!< Position of REGION112 field. */
+#define BPROT_CONFIG3_REGION112_Msk (0x1UL << BPROT_CONFIG3_REGION112_Pos) /*!< Bit mask of REGION112 field. */
+#define BPROT_CONFIG3_REGION112_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION112_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 15 : Enable protection for region 111. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION111_Pos (15UL) /*!< Position of REGION111 field. */
+#define BPROT_CONFIG3_REGION111_Msk (0x1UL << BPROT_CONFIG3_REGION111_Pos) /*!< Bit mask of REGION111 field. */
+#define BPROT_CONFIG3_REGION111_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION111_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 14 : Enable protection for region 110. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION110_Pos (14UL) /*!< Position of REGION110 field. */
+#define BPROT_CONFIG3_REGION110_Msk (0x1UL << BPROT_CONFIG3_REGION110_Pos) /*!< Bit mask of REGION110 field. */
+#define BPROT_CONFIG3_REGION110_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION110_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 13 : Enable protection for region 109. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION109_Pos (13UL) /*!< Position of REGION109 field. */
+#define BPROT_CONFIG3_REGION109_Msk (0x1UL << BPROT_CONFIG3_REGION109_Pos) /*!< Bit mask of REGION109 field. */
+#define BPROT_CONFIG3_REGION109_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION109_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 12 : Enable protection for region 108. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION108_Pos (12UL) /*!< Position of REGION108 field. */
+#define BPROT_CONFIG3_REGION108_Msk (0x1UL << BPROT_CONFIG3_REGION108_Pos) /*!< Bit mask of REGION108 field. */
+#define BPROT_CONFIG3_REGION108_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION108_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 11 : Enable protection for region 107. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION107_Pos (11UL) /*!< Position of REGION107 field. */
+#define BPROT_CONFIG3_REGION107_Msk (0x1UL << BPROT_CONFIG3_REGION107_Pos) /*!< Bit mask of REGION107 field. */
+#define BPROT_CONFIG3_REGION107_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION107_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 10 : Enable protection for region 106. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION106_Pos (10UL) /*!< Position of REGION106 field. */
+#define BPROT_CONFIG3_REGION106_Msk (0x1UL << BPROT_CONFIG3_REGION106_Pos) /*!< Bit mask of REGION106 field. */
+#define BPROT_CONFIG3_REGION106_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION106_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 9 : Enable protection for region 105. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION105_Pos (9UL) /*!< Position of REGION105 field. */
+#define BPROT_CONFIG3_REGION105_Msk (0x1UL << BPROT_CONFIG3_REGION105_Pos) /*!< Bit mask of REGION105 field. */
+#define BPROT_CONFIG3_REGION105_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION105_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 8 : Enable protection for region 104. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION104_Pos (8UL) /*!< Position of REGION104 field. */
+#define BPROT_CONFIG3_REGION104_Msk (0x1UL << BPROT_CONFIG3_REGION104_Pos) /*!< Bit mask of REGION104 field. */
+#define BPROT_CONFIG3_REGION104_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION104_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 7 : Enable protection for region 103. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION103_Pos (7UL) /*!< Position of REGION103 field. */
+#define BPROT_CONFIG3_REGION103_Msk (0x1UL << BPROT_CONFIG3_REGION103_Pos) /*!< Bit mask of REGION103 field. */
+#define BPROT_CONFIG3_REGION103_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION103_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 6 : Enable protection for region 102. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION102_Pos (6UL) /*!< Position of REGION102 field. */
+#define BPROT_CONFIG3_REGION102_Msk (0x1UL << BPROT_CONFIG3_REGION102_Pos) /*!< Bit mask of REGION102 field. */
+#define BPROT_CONFIG3_REGION102_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION102_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 5 : Enable protection for region 101. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION101_Pos (5UL) /*!< Position of REGION101 field. */
+#define BPROT_CONFIG3_REGION101_Msk (0x1UL << BPROT_CONFIG3_REGION101_Pos) /*!< Bit mask of REGION101 field. */
+#define BPROT_CONFIG3_REGION101_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION101_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 4 : Enable protection for region 100. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION100_Pos (4UL) /*!< Position of REGION100 field. */
+#define BPROT_CONFIG3_REGION100_Msk (0x1UL << BPROT_CONFIG3_REGION100_Pos) /*!< Bit mask of REGION100 field. */
+#define BPROT_CONFIG3_REGION100_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION100_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 3 : Enable protection for region 99. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION99_Pos (3UL) /*!< Position of REGION99 field. */
+#define BPROT_CONFIG3_REGION99_Msk (0x1UL << BPROT_CONFIG3_REGION99_Pos) /*!< Bit mask of REGION99 field. */
+#define BPROT_CONFIG3_REGION99_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION99_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 2 : Enable protection for region 98. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION98_Pos (2UL) /*!< Position of REGION98 field. */
+#define BPROT_CONFIG3_REGION98_Msk (0x1UL << BPROT_CONFIG3_REGION98_Pos) /*!< Bit mask of REGION98 field. */
+#define BPROT_CONFIG3_REGION98_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION98_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 1 : Enable protection for region 97. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION97_Pos (1UL) /*!< Position of REGION97 field. */
+#define BPROT_CONFIG3_REGION97_Msk (0x1UL << BPROT_CONFIG3_REGION97_Pos) /*!< Bit mask of REGION97 field. */
+#define BPROT_CONFIG3_REGION97_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION97_Enabled (1UL) /*!< Protection enabled */
+
+/* Bit 0 : Enable protection for region 96. Write '0' has no effect. */
+#define BPROT_CONFIG3_REGION96_Pos (0UL) /*!< Position of REGION96 field. */
+#define BPROT_CONFIG3_REGION96_Msk (0x1UL << BPROT_CONFIG3_REGION96_Pos) /*!< Bit mask of REGION96 field. */
+#define BPROT_CONFIG3_REGION96_Disabled (0UL) /*!< Protection disabled */
+#define BPROT_CONFIG3_REGION96_Enabled (1UL) /*!< Protection enabled */
+
+
+/* Peripheral: CCM */
+/* Description: AES CCM Mode Encryption */
+
+/* Register: CCM_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 0 : Shortcut between ENDKSGEN event and CRYPT task */
+#define CCM_SHORTS_ENDKSGEN_CRYPT_Pos (0UL) /*!< Position of ENDKSGEN_CRYPT field. */
+#define CCM_SHORTS_ENDKSGEN_CRYPT_Msk (0x1UL << CCM_SHORTS_ENDKSGEN_CRYPT_Pos) /*!< Bit mask of ENDKSGEN_CRYPT field. */
+#define CCM_SHORTS_ENDKSGEN_CRYPT_Disabled (0UL) /*!< Disable shortcut */
+#define CCM_SHORTS_ENDKSGEN_CRYPT_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: CCM_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 2 : Write '1' to Enable interrupt for ERROR event */
+#define CCM_INTENSET_ERROR_Pos (2UL) /*!< Position of ERROR field. */
+#define CCM_INTENSET_ERROR_Msk (0x1UL << CCM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define CCM_INTENSET_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define CCM_INTENSET_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define CCM_INTENSET_ERROR_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for ENDCRYPT event */
+#define CCM_INTENSET_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */
+#define CCM_INTENSET_ENDCRYPT_Msk (0x1UL << CCM_INTENSET_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */
+#define CCM_INTENSET_ENDCRYPT_Disabled (0UL) /*!< Read: Disabled */
+#define CCM_INTENSET_ENDCRYPT_Enabled (1UL) /*!< Read: Enabled */
+#define CCM_INTENSET_ENDCRYPT_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for ENDKSGEN event */
+#define CCM_INTENSET_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */
+#define CCM_INTENSET_ENDKSGEN_Msk (0x1UL << CCM_INTENSET_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */
+#define CCM_INTENSET_ENDKSGEN_Disabled (0UL) /*!< Read: Disabled */
+#define CCM_INTENSET_ENDKSGEN_Enabled (1UL) /*!< Read: Enabled */
+#define CCM_INTENSET_ENDKSGEN_Set (1UL) /*!< Enable */
+
+/* Register: CCM_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 2 : Write '1' to Disable interrupt for ERROR event */
+#define CCM_INTENCLR_ERROR_Pos (2UL) /*!< Position of ERROR field. */
+#define CCM_INTENCLR_ERROR_Msk (0x1UL << CCM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define CCM_INTENCLR_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define CCM_INTENCLR_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define CCM_INTENCLR_ERROR_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for ENDCRYPT event */
+#define CCM_INTENCLR_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */
+#define CCM_INTENCLR_ENDCRYPT_Msk (0x1UL << CCM_INTENCLR_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */
+#define CCM_INTENCLR_ENDCRYPT_Disabled (0UL) /*!< Read: Disabled */
+#define CCM_INTENCLR_ENDCRYPT_Enabled (1UL) /*!< Read: Enabled */
+#define CCM_INTENCLR_ENDCRYPT_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for ENDKSGEN event */
+#define CCM_INTENCLR_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */
+#define CCM_INTENCLR_ENDKSGEN_Msk (0x1UL << CCM_INTENCLR_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */
+#define CCM_INTENCLR_ENDKSGEN_Disabled (0UL) /*!< Read: Disabled */
+#define CCM_INTENCLR_ENDKSGEN_Enabled (1UL) /*!< Read: Enabled */
+#define CCM_INTENCLR_ENDKSGEN_Clear (1UL) /*!< Disable */
+
+/* Register: CCM_MICSTATUS */
+/* Description: MIC check result */
+
+/* Bit 0 : The result of the MIC check performed during the previous decryption operation */
+#define CCM_MICSTATUS_MICSTATUS_Pos (0UL) /*!< Position of MICSTATUS field. */
+#define CCM_MICSTATUS_MICSTATUS_Msk (0x1UL << CCM_MICSTATUS_MICSTATUS_Pos) /*!< Bit mask of MICSTATUS field. */
+#define CCM_MICSTATUS_MICSTATUS_CheckFailed (0UL) /*!< MIC check failed */
+#define CCM_MICSTATUS_MICSTATUS_CheckPassed (1UL) /*!< MIC check passed */
+
+/* Register: CCM_ENABLE */
+/* Description: Enable */
+
+/* Bits 1..0 : Enable or disable CCM */
+#define CCM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define CCM_ENABLE_ENABLE_Msk (0x3UL << CCM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define CCM_ENABLE_ENABLE_Disabled (0UL) /*!< Disable */
+#define CCM_ENABLE_ENABLE_Enabled (2UL) /*!< Enable */
+
+/* Register: CCM_MODE */
+/* Description: Operation mode */
+
+/* Bit 24 : Packet length configuration */
+#define CCM_MODE_LENGTH_Pos (24UL) /*!< Position of LENGTH field. */
+#define CCM_MODE_LENGTH_Msk (0x1UL << CCM_MODE_LENGTH_Pos) /*!< Bit mask of LENGTH field. */
+#define CCM_MODE_LENGTH_Default (0UL) /*!< Default length. Effective length of LENGTH field is 5-bit */
+#define CCM_MODE_LENGTH_Extended (1UL) /*!< Extended length. Effective length of LENGTH field is 8-bit */
+
+/* Bit 16 : Data rate that the CCM shall run in synch with */
+#define CCM_MODE_DATARATE_Pos (16UL) /*!< Position of DATARATE field. */
+#define CCM_MODE_DATARATE_Msk (0x1UL << CCM_MODE_DATARATE_Pos) /*!< Bit mask of DATARATE field. */
+#define CCM_MODE_DATARATE_1Mbit (0UL) /*!< In synch with 1 Mbit data rate */
+#define CCM_MODE_DATARATE_2Mbit (1UL) /*!< In synch with 2 Mbit data rate */
+
+/* Bit 0 : The mode of operation to be used */
+#define CCM_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */
+#define CCM_MODE_MODE_Msk (0x1UL << CCM_MODE_MODE_Pos) /*!< Bit mask of MODE field. */
+#define CCM_MODE_MODE_Encryption (0UL) /*!< AES CCM packet encryption mode */
+#define CCM_MODE_MODE_Decryption (1UL) /*!< AES CCM packet decryption mode */
+
+/* Register: CCM_CNFPTR */
+/* Description: Pointer to data structure holding AES key and NONCE vector */
+
+/* Bits 31..0 : Pointer to the data structure holding the AES key and the CCM NONCE vector (see Table 1 CCM data structure overview) */
+#define CCM_CNFPTR_CNFPTR_Pos (0UL) /*!< Position of CNFPTR field. */
+#define CCM_CNFPTR_CNFPTR_Msk (0xFFFFFFFFUL << CCM_CNFPTR_CNFPTR_Pos) /*!< Bit mask of CNFPTR field. */
+
+/* Register: CCM_INPTR */
+/* Description: Input pointer */
+
+/* Bits 31..0 : Input pointer */
+#define CCM_INPTR_INPTR_Pos (0UL) /*!< Position of INPTR field. */
+#define CCM_INPTR_INPTR_Msk (0xFFFFFFFFUL << CCM_INPTR_INPTR_Pos) /*!< Bit mask of INPTR field. */
+
+/* Register: CCM_OUTPTR */
+/* Description: Output pointer */
+
+/* Bits 31..0 : Output pointer */
+#define CCM_OUTPTR_OUTPTR_Pos (0UL) /*!< Position of OUTPTR field. */
+#define CCM_OUTPTR_OUTPTR_Msk (0xFFFFFFFFUL << CCM_OUTPTR_OUTPTR_Pos) /*!< Bit mask of OUTPTR field. */
+
+/* Register: CCM_SCRATCHPTR */
+/* Description: Pointer to data area used for temporary storage */
+
+/* Bits 31..0 : Pointer to a scratch data area used for temporary storage during key-stream generation, MIC generation and encryption/decryption. */
+#define CCM_SCRATCHPTR_SCRATCHPTR_Pos (0UL) /*!< Position of SCRATCHPTR field. */
+#define CCM_SCRATCHPTR_SCRATCHPTR_Msk (0xFFFFFFFFUL << CCM_SCRATCHPTR_SCRATCHPTR_Pos) /*!< Bit mask of SCRATCHPTR field. */
+
+
+/* Peripheral: CLOCK */
+/* Description: Clock control */
+
+/* Register: CLOCK_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 4 : Write '1' to Enable interrupt for CTTO event */
+#define CLOCK_INTENSET_CTTO_Pos (4UL) /*!< Position of CTTO field. */
+#define CLOCK_INTENSET_CTTO_Msk (0x1UL << CLOCK_INTENSET_CTTO_Pos) /*!< Bit mask of CTTO field. */
+#define CLOCK_INTENSET_CTTO_Disabled (0UL) /*!< Read: Disabled */
+#define CLOCK_INTENSET_CTTO_Enabled (1UL) /*!< Read: Enabled */
+#define CLOCK_INTENSET_CTTO_Set (1UL) /*!< Enable */
+
+/* Bit 3 : Write '1' to Enable interrupt for DONE event */
+#define CLOCK_INTENSET_DONE_Pos (3UL) /*!< Position of DONE field. */
+#define CLOCK_INTENSET_DONE_Msk (0x1UL << CLOCK_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */
+#define CLOCK_INTENSET_DONE_Disabled (0UL) /*!< Read: Disabled */
+#define CLOCK_INTENSET_DONE_Enabled (1UL) /*!< Read: Enabled */
+#define CLOCK_INTENSET_DONE_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for LFCLKSTARTED event */
+#define CLOCK_INTENSET_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */
+#define CLOCK_INTENSET_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */
+#define CLOCK_INTENSET_LFCLKSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define CLOCK_INTENSET_LFCLKSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define CLOCK_INTENSET_LFCLKSTARTED_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for HFCLKSTARTED event */
+#define CLOCK_INTENSET_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */
+#define CLOCK_INTENSET_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */
+#define CLOCK_INTENSET_HFCLKSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define CLOCK_INTENSET_HFCLKSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define CLOCK_INTENSET_HFCLKSTARTED_Set (1UL) /*!< Enable */
+
+/* Register: CLOCK_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 4 : Write '1' to Disable interrupt for CTTO event */
+#define CLOCK_INTENCLR_CTTO_Pos (4UL) /*!< Position of CTTO field. */
+#define CLOCK_INTENCLR_CTTO_Msk (0x1UL << CLOCK_INTENCLR_CTTO_Pos) /*!< Bit mask of CTTO field. */
+#define CLOCK_INTENCLR_CTTO_Disabled (0UL) /*!< Read: Disabled */
+#define CLOCK_INTENCLR_CTTO_Enabled (1UL) /*!< Read: Enabled */
+#define CLOCK_INTENCLR_CTTO_Clear (1UL) /*!< Disable */
+
+/* Bit 3 : Write '1' to Disable interrupt for DONE event */
+#define CLOCK_INTENCLR_DONE_Pos (3UL) /*!< Position of DONE field. */
+#define CLOCK_INTENCLR_DONE_Msk (0x1UL << CLOCK_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */
+#define CLOCK_INTENCLR_DONE_Disabled (0UL) /*!< Read: Disabled */
+#define CLOCK_INTENCLR_DONE_Enabled (1UL) /*!< Read: Enabled */
+#define CLOCK_INTENCLR_DONE_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for LFCLKSTARTED event */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for HFCLKSTARTED event */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Clear (1UL) /*!< Disable */
+
+/* Register: CLOCK_HFCLKRUN */
+/* Description: Status indicating that HFCLKSTART task has been triggered */
+
+/* Bit 0 : HFCLKSTART task triggered or not */
+#define CLOCK_HFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */
+#define CLOCK_HFCLKRUN_STATUS_Msk (0x1UL << CLOCK_HFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */
+#define CLOCK_HFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task not triggered */
+#define CLOCK_HFCLKRUN_STATUS_Triggered (1UL) /*!< Task triggered */
+
+/* Register: CLOCK_HFCLKSTAT */
+/* Description: HFCLK status */
+
+/* Bit 16 : HFCLK state */
+#define CLOCK_HFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */
+#define CLOCK_HFCLKSTAT_STATE_Msk (0x1UL << CLOCK_HFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */
+#define CLOCK_HFCLKSTAT_STATE_NotRunning (0UL) /*!< HFCLK not running */
+#define CLOCK_HFCLKSTAT_STATE_Running (1UL) /*!< HFCLK running */
+
+/* Bit 0 : Source of HFCLK */
+#define CLOCK_HFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */
+#define CLOCK_HFCLKSTAT_SRC_Msk (0x1UL << CLOCK_HFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */
+#define CLOCK_HFCLKSTAT_SRC_RC (0UL) /*!< 64 MHz internal oscillator (HFINT) */
+#define CLOCK_HFCLKSTAT_SRC_Xtal (1UL) /*!< 64 MHz crystal oscillator (HFXO) */
+
+/* Register: CLOCK_LFCLKRUN */
+/* Description: Status indicating that LFCLKSTART task has been triggered */
+
+/* Bit 0 : LFCLKSTART task triggered or not */
+#define CLOCK_LFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */
+#define CLOCK_LFCLKRUN_STATUS_Msk (0x1UL << CLOCK_LFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */
+#define CLOCK_LFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task not triggered */
+#define CLOCK_LFCLKRUN_STATUS_Triggered (1UL) /*!< Task triggered */
+
+/* Register: CLOCK_LFCLKSTAT */
+/* Description: LFCLK status */
+
+/* Bit 16 : LFCLK state */
+#define CLOCK_LFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */
+#define CLOCK_LFCLKSTAT_STATE_Msk (0x1UL << CLOCK_LFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */
+#define CLOCK_LFCLKSTAT_STATE_NotRunning (0UL) /*!< LFCLK not running */
+#define CLOCK_LFCLKSTAT_STATE_Running (1UL) /*!< LFCLK running */
+
+/* Bits 1..0 : Source of LFCLK */
+#define CLOCK_LFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */
+#define CLOCK_LFCLKSTAT_SRC_Msk (0x3UL << CLOCK_LFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */
+#define CLOCK_LFCLKSTAT_SRC_RC (0UL) /*!< 32.768 kHz RC oscillator */
+#define CLOCK_LFCLKSTAT_SRC_Xtal (1UL) /*!< 32.768 kHz crystal oscillator */
+#define CLOCK_LFCLKSTAT_SRC_Synth (2UL) /*!< 32.768 kHz synthesized from HFCLK */
+
+/* Register: CLOCK_LFCLKSRCCOPY */
+/* Description: Copy of LFCLKSRC register, set when LFCLKSTART task was triggered */
+
+/* Bits 1..0 : Clock source */
+#define CLOCK_LFCLKSRCCOPY_SRC_Pos (0UL) /*!< Position of SRC field. */
+#define CLOCK_LFCLKSRCCOPY_SRC_Msk (0x3UL << CLOCK_LFCLKSRCCOPY_SRC_Pos) /*!< Bit mask of SRC field. */
+#define CLOCK_LFCLKSRCCOPY_SRC_RC (0UL) /*!< 32.768 kHz RC oscillator */
+#define CLOCK_LFCLKSRCCOPY_SRC_Xtal (1UL) /*!< 32.768 kHz crystal oscillator */
+#define CLOCK_LFCLKSRCCOPY_SRC_Synth (2UL) /*!< 32.768 kHz synthesized from HFCLK */
+
+/* Register: CLOCK_LFCLKSRC */
+/* Description: Clock source for the LFCLK */
+
+/* Bits 1..0 : Clock source */
+#define CLOCK_LFCLKSRC_SRC_Pos (0UL) /*!< Position of SRC field. */
+#define CLOCK_LFCLKSRC_SRC_Msk (0x3UL << CLOCK_LFCLKSRC_SRC_Pos) /*!< Bit mask of SRC field. */
+#define CLOCK_LFCLKSRC_SRC_RC (0UL) /*!< 32.768 kHz RC oscillator */
+#define CLOCK_LFCLKSRC_SRC_Xtal (1UL) /*!< 32.768 kHz crystal oscillator */
+#define CLOCK_LFCLKSRC_SRC_Synth (2UL) /*!< 32.768 kHz synthesized from HFCLK */
+
+/* Register: CLOCK_CTIV */
+/* Description: Calibration timer interval (retained register, same reset behaviour as RESETREAS) */
+
+/* Bits 6..0 : Calibration timer interval in multiple of 0.25 seconds. Range: 0.25 seconds to 31.75 seconds. */
+#define CLOCK_CTIV_CTIV_Pos (0UL) /*!< Position of CTIV field. */
+#define CLOCK_CTIV_CTIV_Msk (0x7FUL << CLOCK_CTIV_CTIV_Pos) /*!< Bit mask of CTIV field. */
+
+/* Register: CLOCK_TRACECONFIG */
+/* Description: Clocking options for the Trace Port debug interface */
+
+/* Bits 17..16 : Pin multiplexing of trace signals. */
+#define CLOCK_TRACECONFIG_TRACEMUX_Pos (16UL) /*!< Position of TRACEMUX field. */
+#define CLOCK_TRACECONFIG_TRACEMUX_Msk (0x3UL << CLOCK_TRACECONFIG_TRACEMUX_Pos) /*!< Bit mask of TRACEMUX field. */
+#define CLOCK_TRACECONFIG_TRACEMUX_GPIO (0UL) /*!< GPIOs multiplexed onto all trace-pins */
+#define CLOCK_TRACECONFIG_TRACEMUX_Serial (1UL) /*!< SWO multiplexed onto P0.18, GPIO multiplexed onto other trace pins */
+#define CLOCK_TRACECONFIG_TRACEMUX_Parallel (2UL) /*!< TRACECLK and TRACEDATA multiplexed onto P0.20, P0.18, P0.16, P0.15 and P0.14. */
+
+/* Bits 1..0 : Speed of Trace Port clock. Note that the TRACECLK pin will output this clock divided by two. */
+#define CLOCK_TRACECONFIG_TRACEPORTSPEED_Pos (0UL) /*!< Position of TRACEPORTSPEED field. */
+#define CLOCK_TRACECONFIG_TRACEPORTSPEED_Msk (0x3UL << CLOCK_TRACECONFIG_TRACEPORTSPEED_Pos) /*!< Bit mask of TRACEPORTSPEED field. */
+#define CLOCK_TRACECONFIG_TRACEPORTSPEED_32MHz (0UL) /*!< 32 MHz Trace Port clock (TRACECLK = 16 MHz) */
+#define CLOCK_TRACECONFIG_TRACEPORTSPEED_16MHz (1UL) /*!< 16 MHz Trace Port clock (TRACECLK = 8 MHz) */
+#define CLOCK_TRACECONFIG_TRACEPORTSPEED_8MHz (2UL) /*!< 8 MHz Trace Port clock (TRACECLK = 4 MHz) */
+#define CLOCK_TRACECONFIG_TRACEPORTSPEED_4MHz (3UL) /*!< 4 MHz Trace Port clock (TRACECLK = 2 MHz) */
+
+
+/* Peripheral: COMP */
+/* Description: Comparator */
+
+/* Register: COMP_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 4 : Shortcut between CROSS event and STOP task */
+#define COMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */
+#define COMP_SHORTS_CROSS_STOP_Msk (0x1UL << COMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */
+#define COMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define COMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 3 : Shortcut between UP event and STOP task */
+#define COMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */
+#define COMP_SHORTS_UP_STOP_Msk (0x1UL << COMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */
+#define COMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define COMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 2 : Shortcut between DOWN event and STOP task */
+#define COMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */
+#define COMP_SHORTS_DOWN_STOP_Msk (0x1UL << COMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */
+#define COMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define COMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 1 : Shortcut between READY event and STOP task */
+#define COMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */
+#define COMP_SHORTS_READY_STOP_Msk (0x1UL << COMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */
+#define COMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define COMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 0 : Shortcut between READY event and SAMPLE task */
+#define COMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */
+#define COMP_SHORTS_READY_SAMPLE_Msk (0x1UL << COMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */
+#define COMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Disable shortcut */
+#define COMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: COMP_INTEN */
+/* Description: Enable or disable interrupt */
+
+/* Bit 3 : Enable or disable interrupt for CROSS event */
+#define COMP_INTEN_CROSS_Pos (3UL) /*!< Position of CROSS field. */
+#define COMP_INTEN_CROSS_Msk (0x1UL << COMP_INTEN_CROSS_Pos) /*!< Bit mask of CROSS field. */
+#define COMP_INTEN_CROSS_Disabled (0UL) /*!< Disable */
+#define COMP_INTEN_CROSS_Enabled (1UL) /*!< Enable */
+
+/* Bit 2 : Enable or disable interrupt for UP event */
+#define COMP_INTEN_UP_Pos (2UL) /*!< Position of UP field. */
+#define COMP_INTEN_UP_Msk (0x1UL << COMP_INTEN_UP_Pos) /*!< Bit mask of UP field. */
+#define COMP_INTEN_UP_Disabled (0UL) /*!< Disable */
+#define COMP_INTEN_UP_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable interrupt for DOWN event */
+#define COMP_INTEN_DOWN_Pos (1UL) /*!< Position of DOWN field. */
+#define COMP_INTEN_DOWN_Msk (0x1UL << COMP_INTEN_DOWN_Pos) /*!< Bit mask of DOWN field. */
+#define COMP_INTEN_DOWN_Disabled (0UL) /*!< Disable */
+#define COMP_INTEN_DOWN_Enabled (1UL) /*!< Enable */
+
+/* Bit 0 : Enable or disable interrupt for READY event */
+#define COMP_INTEN_READY_Pos (0UL) /*!< Position of READY field. */
+#define COMP_INTEN_READY_Msk (0x1UL << COMP_INTEN_READY_Pos) /*!< Bit mask of READY field. */
+#define COMP_INTEN_READY_Disabled (0UL) /*!< Disable */
+#define COMP_INTEN_READY_Enabled (1UL) /*!< Enable */
+
+/* Register: COMP_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 3 : Write '1' to Enable interrupt for CROSS event */
+#define COMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */
+#define COMP_INTENSET_CROSS_Msk (0x1UL << COMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */
+#define COMP_INTENSET_CROSS_Disabled (0UL) /*!< Read: Disabled */
+#define COMP_INTENSET_CROSS_Enabled (1UL) /*!< Read: Enabled */
+#define COMP_INTENSET_CROSS_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for UP event */
+#define COMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */
+#define COMP_INTENSET_UP_Msk (0x1UL << COMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */
+#define COMP_INTENSET_UP_Disabled (0UL) /*!< Read: Disabled */
+#define COMP_INTENSET_UP_Enabled (1UL) /*!< Read: Enabled */
+#define COMP_INTENSET_UP_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for DOWN event */
+#define COMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */
+#define COMP_INTENSET_DOWN_Msk (0x1UL << COMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */
+#define COMP_INTENSET_DOWN_Disabled (0UL) /*!< Read: Disabled */
+#define COMP_INTENSET_DOWN_Enabled (1UL) /*!< Read: Enabled */
+#define COMP_INTENSET_DOWN_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for READY event */
+#define COMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */
+#define COMP_INTENSET_READY_Msk (0x1UL << COMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
+#define COMP_INTENSET_READY_Disabled (0UL) /*!< Read: Disabled */
+#define COMP_INTENSET_READY_Enabled (1UL) /*!< Read: Enabled */
+#define COMP_INTENSET_READY_Set (1UL) /*!< Enable */
+
+/* Register: COMP_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 3 : Write '1' to Disable interrupt for CROSS event */
+#define COMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */
+#define COMP_INTENCLR_CROSS_Msk (0x1UL << COMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */
+#define COMP_INTENCLR_CROSS_Disabled (0UL) /*!< Read: Disabled */
+#define COMP_INTENCLR_CROSS_Enabled (1UL) /*!< Read: Enabled */
+#define COMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for UP event */
+#define COMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */
+#define COMP_INTENCLR_UP_Msk (0x1UL << COMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */
+#define COMP_INTENCLR_UP_Disabled (0UL) /*!< Read: Disabled */
+#define COMP_INTENCLR_UP_Enabled (1UL) /*!< Read: Enabled */
+#define COMP_INTENCLR_UP_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for DOWN event */
+#define COMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */
+#define COMP_INTENCLR_DOWN_Msk (0x1UL << COMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */
+#define COMP_INTENCLR_DOWN_Disabled (0UL) /*!< Read: Disabled */
+#define COMP_INTENCLR_DOWN_Enabled (1UL) /*!< Read: Enabled */
+#define COMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for READY event */
+#define COMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */
+#define COMP_INTENCLR_READY_Msk (0x1UL << COMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
+#define COMP_INTENCLR_READY_Disabled (0UL) /*!< Read: Disabled */
+#define COMP_INTENCLR_READY_Enabled (1UL) /*!< Read: Enabled */
+#define COMP_INTENCLR_READY_Clear (1UL) /*!< Disable */
+
+/* Register: COMP_RESULT */
+/* Description: Compare result */
+
+/* Bit 0 : Result of last compare. Decision point SAMPLE task. */
+#define COMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */
+#define COMP_RESULT_RESULT_Msk (0x1UL << COMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */
+#define COMP_RESULT_RESULT_Below (0UL) /*!< Input voltage is below the threshold (VIN+ < VIN-) */
+#define COMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the threshold (VIN+ > VIN-) */
+
+/* Register: COMP_ENABLE */
+/* Description: COMP enable */
+
+/* Bits 1..0 : Enable or disable COMP */
+#define COMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define COMP_ENABLE_ENABLE_Msk (0x3UL << COMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define COMP_ENABLE_ENABLE_Disabled (0UL) /*!< Disable */
+#define COMP_ENABLE_ENABLE_Enabled (2UL) /*!< Enable */
+
+/* Register: COMP_PSEL */
+/* Description: Pin select */
+
+/* Bits 2..0 : Analog pin select */
+#define COMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */
+#define COMP_PSEL_PSEL_Msk (0x7UL << COMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */
+#define COMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< AIN0 selected as analog input */
+#define COMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< AIN1 selected as analog input */
+#define COMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< AIN2 selected as analog input */
+#define COMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< AIN3 selected as analog input */
+#define COMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< AIN4 selected as analog input */
+#define COMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< AIN5 selected as analog input */
+#define COMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< AIN6 selected as analog input */
+#define COMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< AIN7 selected as analog input */
+
+/* Register: COMP_REFSEL */
+/* Description: Reference source select */
+
+/* Bits 2..0 : Reference select */
+#define COMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */
+#define COMP_REFSEL_REFSEL_Msk (0x7UL << COMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */
+#define COMP_REFSEL_REFSEL_Int1V2 (0UL) /*!< VREF = internal 1.2 V reference (VDD >= 1.7 V) */
+#define COMP_REFSEL_REFSEL_Int1V8 (1UL) /*!< VREF = internal 1.8 V reference (VDD >= VREF + 0.2 V) */
+#define COMP_REFSEL_REFSEL_Int2V4 (2UL) /*!< VREF = internal 2.4 V reference (VDD >= VREF + 0.2 V) */
+#define COMP_REFSEL_REFSEL_VDD (4UL) /*!< VREF = VDD */
+#define COMP_REFSEL_REFSEL_ARef (7UL) /*!< VREF = AREF (VDD >= VREF >= AREFMIN) */
+
+/* Register: COMP_EXTREFSEL */
+/* Description: External reference select */
+
+/* Bit 0 : External analog reference select */
+#define COMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */
+#define COMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << COMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */
+#define COMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use AIN0 as external analog reference */
+#define COMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use AIN1 as external analog reference */
+
+/* Register: COMP_TH */
+/* Description: Threshold configuration for hysteresis unit */
+
+/* Bits 13..8 : VUP = (THUP+1)/64*VREF */
+#define COMP_TH_THUP_Pos (8UL) /*!< Position of THUP field. */
+#define COMP_TH_THUP_Msk (0x3FUL << COMP_TH_THUP_Pos) /*!< Bit mask of THUP field. */
+
+/* Bits 5..0 : VDOWN = (THDOWN+1)/64*VREF */
+#define COMP_TH_THDOWN_Pos (0UL) /*!< Position of THDOWN field. */
+#define COMP_TH_THDOWN_Msk (0x3FUL << COMP_TH_THDOWN_Pos) /*!< Bit mask of THDOWN field. */
+
+/* Register: COMP_MODE */
+/* Description: Mode configuration */
+
+/* Bit 8 : Main operation mode */
+#define COMP_MODE_MAIN_Pos (8UL) /*!< Position of MAIN field. */
+#define COMP_MODE_MAIN_Msk (0x1UL << COMP_MODE_MAIN_Pos) /*!< Bit mask of MAIN field. */
+#define COMP_MODE_MAIN_SE (0UL) /*!< Single ended mode */
+#define COMP_MODE_MAIN_Diff (1UL) /*!< Differential mode */
+
+/* Bits 1..0 : Speed and power mode */
+#define COMP_MODE_SP_Pos (0UL) /*!< Position of SP field. */
+#define COMP_MODE_SP_Msk (0x3UL << COMP_MODE_SP_Pos) /*!< Bit mask of SP field. */
+#define COMP_MODE_SP_Low (0UL) /*!< Low power mode */
+#define COMP_MODE_SP_Normal (1UL) /*!< Normal mode */
+#define COMP_MODE_SP_High (2UL) /*!< High speed mode */
+
+/* Register: COMP_HYST */
+/* Description: Comparator hysteresis enable */
+
+/* Bit 0 : Comparator hysteresis */
+#define COMP_HYST_HYST_Pos (0UL) /*!< Position of HYST field. */
+#define COMP_HYST_HYST_Msk (0x1UL << COMP_HYST_HYST_Pos) /*!< Bit mask of HYST field. */
+#define COMP_HYST_HYST_NoHyst (0UL) /*!< Comparator hysteresis disabled */
+#define COMP_HYST_HYST_Hyst50mV (1UL) /*!< Comparator hysteresis enabled */
+
+/* Register: COMP_ISOURCE */
+/* Description: Current source select on analog input */
+
+/* Bits 1..0 : Comparator hysteresis */
+#define COMP_ISOURCE_ISOURCE_Pos (0UL) /*!< Position of ISOURCE field. */
+#define COMP_ISOURCE_ISOURCE_Msk (0x3UL << COMP_ISOURCE_ISOURCE_Pos) /*!< Bit mask of ISOURCE field. */
+#define COMP_ISOURCE_ISOURCE_Off (0UL) /*!< Current source disabled */
+#define COMP_ISOURCE_ISOURCE_Ien2mA5 (1UL) /*!< Current source enabled (+/- 2.5 uA) */
+#define COMP_ISOURCE_ISOURCE_Ien5mA (2UL) /*!< Current source enabled (+/- 5 uA) */
+#define COMP_ISOURCE_ISOURCE_Ien10mA (3UL) /*!< Current source enabled (+/- 10 uA) */
+
+
+/* Peripheral: ECB */
+/* Description: AES ECB Mode Encryption */
+
+/* Register: ECB_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 1 : Write '1' to Enable interrupt for ERRORECB event */
+#define ECB_INTENSET_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */
+#define ECB_INTENSET_ERRORECB_Msk (0x1UL << ECB_INTENSET_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */
+#define ECB_INTENSET_ERRORECB_Disabled (0UL) /*!< Read: Disabled */
+#define ECB_INTENSET_ERRORECB_Enabled (1UL) /*!< Read: Enabled */
+#define ECB_INTENSET_ERRORECB_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for ENDECB event */
+#define ECB_INTENSET_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */
+#define ECB_INTENSET_ENDECB_Msk (0x1UL << ECB_INTENSET_ENDECB_Pos) /*!< Bit mask of ENDECB field. */
+#define ECB_INTENSET_ENDECB_Disabled (0UL) /*!< Read: Disabled */
+#define ECB_INTENSET_ENDECB_Enabled (1UL) /*!< Read: Enabled */
+#define ECB_INTENSET_ENDECB_Set (1UL) /*!< Enable */
+
+/* Register: ECB_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 1 : Write '1' to Disable interrupt for ERRORECB event */
+#define ECB_INTENCLR_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */
+#define ECB_INTENCLR_ERRORECB_Msk (0x1UL << ECB_INTENCLR_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */
+#define ECB_INTENCLR_ERRORECB_Disabled (0UL) /*!< Read: Disabled */
+#define ECB_INTENCLR_ERRORECB_Enabled (1UL) /*!< Read: Enabled */
+#define ECB_INTENCLR_ERRORECB_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for ENDECB event */
+#define ECB_INTENCLR_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */
+#define ECB_INTENCLR_ENDECB_Msk (0x1UL << ECB_INTENCLR_ENDECB_Pos) /*!< Bit mask of ENDECB field. */
+#define ECB_INTENCLR_ENDECB_Disabled (0UL) /*!< Read: Disabled */
+#define ECB_INTENCLR_ENDECB_Enabled (1UL) /*!< Read: Enabled */
+#define ECB_INTENCLR_ENDECB_Clear (1UL) /*!< Disable */
+
+/* Register: ECB_ECBDATAPTR */
+/* Description: ECB block encrypt memory pointers */
+
+/* Bits 31..0 : Pointer to the ECB data structure (see Table 1 ECB data structure overview) */
+#define ECB_ECBDATAPTR_ECBDATAPTR_Pos (0UL) /*!< Position of ECBDATAPTR field. */
+#define ECB_ECBDATAPTR_ECBDATAPTR_Msk (0xFFFFFFFFUL << ECB_ECBDATAPTR_ECBDATAPTR_Pos) /*!< Bit mask of ECBDATAPTR field. */
+
+
+/* Peripheral: EGU */
+/* Description: Event Generator Unit 0 */
+
+/* Register: EGU_INTEN */
+/* Description: Enable or disable interrupt */
+
+/* Bit 15 : Enable or disable interrupt for TRIGGERED[15] event */
+#define EGU_INTEN_TRIGGERED15_Pos (15UL) /*!< Position of TRIGGERED15 field. */
+#define EGU_INTEN_TRIGGERED15_Msk (0x1UL << EGU_INTEN_TRIGGERED15_Pos) /*!< Bit mask of TRIGGERED15 field. */
+#define EGU_INTEN_TRIGGERED15_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED15_Enabled (1UL) /*!< Enable */
+
+/* Bit 14 : Enable or disable interrupt for TRIGGERED[14] event */
+#define EGU_INTEN_TRIGGERED14_Pos (14UL) /*!< Position of TRIGGERED14 field. */
+#define EGU_INTEN_TRIGGERED14_Msk (0x1UL << EGU_INTEN_TRIGGERED14_Pos) /*!< Bit mask of TRIGGERED14 field. */
+#define EGU_INTEN_TRIGGERED14_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED14_Enabled (1UL) /*!< Enable */
+
+/* Bit 13 : Enable or disable interrupt for TRIGGERED[13] event */
+#define EGU_INTEN_TRIGGERED13_Pos (13UL) /*!< Position of TRIGGERED13 field. */
+#define EGU_INTEN_TRIGGERED13_Msk (0x1UL << EGU_INTEN_TRIGGERED13_Pos) /*!< Bit mask of TRIGGERED13 field. */
+#define EGU_INTEN_TRIGGERED13_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED13_Enabled (1UL) /*!< Enable */
+
+/* Bit 12 : Enable or disable interrupt for TRIGGERED[12] event */
+#define EGU_INTEN_TRIGGERED12_Pos (12UL) /*!< Position of TRIGGERED12 field. */
+#define EGU_INTEN_TRIGGERED12_Msk (0x1UL << EGU_INTEN_TRIGGERED12_Pos) /*!< Bit mask of TRIGGERED12 field. */
+#define EGU_INTEN_TRIGGERED12_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED12_Enabled (1UL) /*!< Enable */
+
+/* Bit 11 : Enable or disable interrupt for TRIGGERED[11] event */
+#define EGU_INTEN_TRIGGERED11_Pos (11UL) /*!< Position of TRIGGERED11 field. */
+#define EGU_INTEN_TRIGGERED11_Msk (0x1UL << EGU_INTEN_TRIGGERED11_Pos) /*!< Bit mask of TRIGGERED11 field. */
+#define EGU_INTEN_TRIGGERED11_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED11_Enabled (1UL) /*!< Enable */
+
+/* Bit 10 : Enable or disable interrupt for TRIGGERED[10] event */
+#define EGU_INTEN_TRIGGERED10_Pos (10UL) /*!< Position of TRIGGERED10 field. */
+#define EGU_INTEN_TRIGGERED10_Msk (0x1UL << EGU_INTEN_TRIGGERED10_Pos) /*!< Bit mask of TRIGGERED10 field. */
+#define EGU_INTEN_TRIGGERED10_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED10_Enabled (1UL) /*!< Enable */
+
+/* Bit 9 : Enable or disable interrupt for TRIGGERED[9] event */
+#define EGU_INTEN_TRIGGERED9_Pos (9UL) /*!< Position of TRIGGERED9 field. */
+#define EGU_INTEN_TRIGGERED9_Msk (0x1UL << EGU_INTEN_TRIGGERED9_Pos) /*!< Bit mask of TRIGGERED9 field. */
+#define EGU_INTEN_TRIGGERED9_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED9_Enabled (1UL) /*!< Enable */
+
+/* Bit 8 : Enable or disable interrupt for TRIGGERED[8] event */
+#define EGU_INTEN_TRIGGERED8_Pos (8UL) /*!< Position of TRIGGERED8 field. */
+#define EGU_INTEN_TRIGGERED8_Msk (0x1UL << EGU_INTEN_TRIGGERED8_Pos) /*!< Bit mask of TRIGGERED8 field. */
+#define EGU_INTEN_TRIGGERED8_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED8_Enabled (1UL) /*!< Enable */
+
+/* Bit 7 : Enable or disable interrupt for TRIGGERED[7] event */
+#define EGU_INTEN_TRIGGERED7_Pos (7UL) /*!< Position of TRIGGERED7 field. */
+#define EGU_INTEN_TRIGGERED7_Msk (0x1UL << EGU_INTEN_TRIGGERED7_Pos) /*!< Bit mask of TRIGGERED7 field. */
+#define EGU_INTEN_TRIGGERED7_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED7_Enabled (1UL) /*!< Enable */
+
+/* Bit 6 : Enable or disable interrupt for TRIGGERED[6] event */
+#define EGU_INTEN_TRIGGERED6_Pos (6UL) /*!< Position of TRIGGERED6 field. */
+#define EGU_INTEN_TRIGGERED6_Msk (0x1UL << EGU_INTEN_TRIGGERED6_Pos) /*!< Bit mask of TRIGGERED6 field. */
+#define EGU_INTEN_TRIGGERED6_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED6_Enabled (1UL) /*!< Enable */
+
+/* Bit 5 : Enable or disable interrupt for TRIGGERED[5] event */
+#define EGU_INTEN_TRIGGERED5_Pos (5UL) /*!< Position of TRIGGERED5 field. */
+#define EGU_INTEN_TRIGGERED5_Msk (0x1UL << EGU_INTEN_TRIGGERED5_Pos) /*!< Bit mask of TRIGGERED5 field. */
+#define EGU_INTEN_TRIGGERED5_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED5_Enabled (1UL) /*!< Enable */
+
+/* Bit 4 : Enable or disable interrupt for TRIGGERED[4] event */
+#define EGU_INTEN_TRIGGERED4_Pos (4UL) /*!< Position of TRIGGERED4 field. */
+#define EGU_INTEN_TRIGGERED4_Msk (0x1UL << EGU_INTEN_TRIGGERED4_Pos) /*!< Bit mask of TRIGGERED4 field. */
+#define EGU_INTEN_TRIGGERED4_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED4_Enabled (1UL) /*!< Enable */
+
+/* Bit 3 : Enable or disable interrupt for TRIGGERED[3] event */
+#define EGU_INTEN_TRIGGERED3_Pos (3UL) /*!< Position of TRIGGERED3 field. */
+#define EGU_INTEN_TRIGGERED3_Msk (0x1UL << EGU_INTEN_TRIGGERED3_Pos) /*!< Bit mask of TRIGGERED3 field. */
+#define EGU_INTEN_TRIGGERED3_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED3_Enabled (1UL) /*!< Enable */
+
+/* Bit 2 : Enable or disable interrupt for TRIGGERED[2] event */
+#define EGU_INTEN_TRIGGERED2_Pos (2UL) /*!< Position of TRIGGERED2 field. */
+#define EGU_INTEN_TRIGGERED2_Msk (0x1UL << EGU_INTEN_TRIGGERED2_Pos) /*!< Bit mask of TRIGGERED2 field. */
+#define EGU_INTEN_TRIGGERED2_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED2_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable interrupt for TRIGGERED[1] event */
+#define EGU_INTEN_TRIGGERED1_Pos (1UL) /*!< Position of TRIGGERED1 field. */
+#define EGU_INTEN_TRIGGERED1_Msk (0x1UL << EGU_INTEN_TRIGGERED1_Pos) /*!< Bit mask of TRIGGERED1 field. */
+#define EGU_INTEN_TRIGGERED1_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED1_Enabled (1UL) /*!< Enable */
+
+/* Bit 0 : Enable or disable interrupt for TRIGGERED[0] event */
+#define EGU_INTEN_TRIGGERED0_Pos (0UL) /*!< Position of TRIGGERED0 field. */
+#define EGU_INTEN_TRIGGERED0_Msk (0x1UL << EGU_INTEN_TRIGGERED0_Pos) /*!< Bit mask of TRIGGERED0 field. */
+#define EGU_INTEN_TRIGGERED0_Disabled (0UL) /*!< Disable */
+#define EGU_INTEN_TRIGGERED0_Enabled (1UL) /*!< Enable */
+
+/* Register: EGU_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 15 : Write '1' to Enable interrupt for TRIGGERED[15] event */
+#define EGU_INTENSET_TRIGGERED15_Pos (15UL) /*!< Position of TRIGGERED15 field. */
+#define EGU_INTENSET_TRIGGERED15_Msk (0x1UL << EGU_INTENSET_TRIGGERED15_Pos) /*!< Bit mask of TRIGGERED15 field. */
+#define EGU_INTENSET_TRIGGERED15_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED15_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED15_Set (1UL) /*!< Enable */
+
+/* Bit 14 : Write '1' to Enable interrupt for TRIGGERED[14] event */
+#define EGU_INTENSET_TRIGGERED14_Pos (14UL) /*!< Position of TRIGGERED14 field. */
+#define EGU_INTENSET_TRIGGERED14_Msk (0x1UL << EGU_INTENSET_TRIGGERED14_Pos) /*!< Bit mask of TRIGGERED14 field. */
+#define EGU_INTENSET_TRIGGERED14_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED14_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED14_Set (1UL) /*!< Enable */
+
+/* Bit 13 : Write '1' to Enable interrupt for TRIGGERED[13] event */
+#define EGU_INTENSET_TRIGGERED13_Pos (13UL) /*!< Position of TRIGGERED13 field. */
+#define EGU_INTENSET_TRIGGERED13_Msk (0x1UL << EGU_INTENSET_TRIGGERED13_Pos) /*!< Bit mask of TRIGGERED13 field. */
+#define EGU_INTENSET_TRIGGERED13_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED13_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED13_Set (1UL) /*!< Enable */
+
+/* Bit 12 : Write '1' to Enable interrupt for TRIGGERED[12] event */
+#define EGU_INTENSET_TRIGGERED12_Pos (12UL) /*!< Position of TRIGGERED12 field. */
+#define EGU_INTENSET_TRIGGERED12_Msk (0x1UL << EGU_INTENSET_TRIGGERED12_Pos) /*!< Bit mask of TRIGGERED12 field. */
+#define EGU_INTENSET_TRIGGERED12_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED12_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED12_Set (1UL) /*!< Enable */
+
+/* Bit 11 : Write '1' to Enable interrupt for TRIGGERED[11] event */
+#define EGU_INTENSET_TRIGGERED11_Pos (11UL) /*!< Position of TRIGGERED11 field. */
+#define EGU_INTENSET_TRIGGERED11_Msk (0x1UL << EGU_INTENSET_TRIGGERED11_Pos) /*!< Bit mask of TRIGGERED11 field. */
+#define EGU_INTENSET_TRIGGERED11_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED11_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED11_Set (1UL) /*!< Enable */
+
+/* Bit 10 : Write '1' to Enable interrupt for TRIGGERED[10] event */
+#define EGU_INTENSET_TRIGGERED10_Pos (10UL) /*!< Position of TRIGGERED10 field. */
+#define EGU_INTENSET_TRIGGERED10_Msk (0x1UL << EGU_INTENSET_TRIGGERED10_Pos) /*!< Bit mask of TRIGGERED10 field. */
+#define EGU_INTENSET_TRIGGERED10_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED10_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED10_Set (1UL) /*!< Enable */
+
+/* Bit 9 : Write '1' to Enable interrupt for TRIGGERED[9] event */
+#define EGU_INTENSET_TRIGGERED9_Pos (9UL) /*!< Position of TRIGGERED9 field. */
+#define EGU_INTENSET_TRIGGERED9_Msk (0x1UL << EGU_INTENSET_TRIGGERED9_Pos) /*!< Bit mask of TRIGGERED9 field. */
+#define EGU_INTENSET_TRIGGERED9_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED9_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED9_Set (1UL) /*!< Enable */
+
+/* Bit 8 : Write '1' to Enable interrupt for TRIGGERED[8] event */
+#define EGU_INTENSET_TRIGGERED8_Pos (8UL) /*!< Position of TRIGGERED8 field. */
+#define EGU_INTENSET_TRIGGERED8_Msk (0x1UL << EGU_INTENSET_TRIGGERED8_Pos) /*!< Bit mask of TRIGGERED8 field. */
+#define EGU_INTENSET_TRIGGERED8_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED8_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED8_Set (1UL) /*!< Enable */
+
+/* Bit 7 : Write '1' to Enable interrupt for TRIGGERED[7] event */
+#define EGU_INTENSET_TRIGGERED7_Pos (7UL) /*!< Position of TRIGGERED7 field. */
+#define EGU_INTENSET_TRIGGERED7_Msk (0x1UL << EGU_INTENSET_TRIGGERED7_Pos) /*!< Bit mask of TRIGGERED7 field. */
+#define EGU_INTENSET_TRIGGERED7_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED7_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED7_Set (1UL) /*!< Enable */
+
+/* Bit 6 : Write '1' to Enable interrupt for TRIGGERED[6] event */
+#define EGU_INTENSET_TRIGGERED6_Pos (6UL) /*!< Position of TRIGGERED6 field. */
+#define EGU_INTENSET_TRIGGERED6_Msk (0x1UL << EGU_INTENSET_TRIGGERED6_Pos) /*!< Bit mask of TRIGGERED6 field. */
+#define EGU_INTENSET_TRIGGERED6_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED6_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED6_Set (1UL) /*!< Enable */
+
+/* Bit 5 : Write '1' to Enable interrupt for TRIGGERED[5] event */
+#define EGU_INTENSET_TRIGGERED5_Pos (5UL) /*!< Position of TRIGGERED5 field. */
+#define EGU_INTENSET_TRIGGERED5_Msk (0x1UL << EGU_INTENSET_TRIGGERED5_Pos) /*!< Bit mask of TRIGGERED5 field. */
+#define EGU_INTENSET_TRIGGERED5_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED5_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED5_Set (1UL) /*!< Enable */
+
+/* Bit 4 : Write '1' to Enable interrupt for TRIGGERED[4] event */
+#define EGU_INTENSET_TRIGGERED4_Pos (4UL) /*!< Position of TRIGGERED4 field. */
+#define EGU_INTENSET_TRIGGERED4_Msk (0x1UL << EGU_INTENSET_TRIGGERED4_Pos) /*!< Bit mask of TRIGGERED4 field. */
+#define EGU_INTENSET_TRIGGERED4_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED4_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED4_Set (1UL) /*!< Enable */
+
+/* Bit 3 : Write '1' to Enable interrupt for TRIGGERED[3] event */
+#define EGU_INTENSET_TRIGGERED3_Pos (3UL) /*!< Position of TRIGGERED3 field. */
+#define EGU_INTENSET_TRIGGERED3_Msk (0x1UL << EGU_INTENSET_TRIGGERED3_Pos) /*!< Bit mask of TRIGGERED3 field. */
+#define EGU_INTENSET_TRIGGERED3_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED3_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED3_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for TRIGGERED[2] event */
+#define EGU_INTENSET_TRIGGERED2_Pos (2UL) /*!< Position of TRIGGERED2 field. */
+#define EGU_INTENSET_TRIGGERED2_Msk (0x1UL << EGU_INTENSET_TRIGGERED2_Pos) /*!< Bit mask of TRIGGERED2 field. */
+#define EGU_INTENSET_TRIGGERED2_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED2_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED2_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for TRIGGERED[1] event */
+#define EGU_INTENSET_TRIGGERED1_Pos (1UL) /*!< Position of TRIGGERED1 field. */
+#define EGU_INTENSET_TRIGGERED1_Msk (0x1UL << EGU_INTENSET_TRIGGERED1_Pos) /*!< Bit mask of TRIGGERED1 field. */
+#define EGU_INTENSET_TRIGGERED1_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED1_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED1_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for TRIGGERED[0] event */
+#define EGU_INTENSET_TRIGGERED0_Pos (0UL) /*!< Position of TRIGGERED0 field. */
+#define EGU_INTENSET_TRIGGERED0_Msk (0x1UL << EGU_INTENSET_TRIGGERED0_Pos) /*!< Bit mask of TRIGGERED0 field. */
+#define EGU_INTENSET_TRIGGERED0_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENSET_TRIGGERED0_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENSET_TRIGGERED0_Set (1UL) /*!< Enable */
+
+/* Register: EGU_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 15 : Write '1' to Disable interrupt for TRIGGERED[15] event */
+#define EGU_INTENCLR_TRIGGERED15_Pos (15UL) /*!< Position of TRIGGERED15 field. */
+#define EGU_INTENCLR_TRIGGERED15_Msk (0x1UL << EGU_INTENCLR_TRIGGERED15_Pos) /*!< Bit mask of TRIGGERED15 field. */
+#define EGU_INTENCLR_TRIGGERED15_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED15_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED15_Clear (1UL) /*!< Disable */
+
+/* Bit 14 : Write '1' to Disable interrupt for TRIGGERED[14] event */
+#define EGU_INTENCLR_TRIGGERED14_Pos (14UL) /*!< Position of TRIGGERED14 field. */
+#define EGU_INTENCLR_TRIGGERED14_Msk (0x1UL << EGU_INTENCLR_TRIGGERED14_Pos) /*!< Bit mask of TRIGGERED14 field. */
+#define EGU_INTENCLR_TRIGGERED14_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED14_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED14_Clear (1UL) /*!< Disable */
+
+/* Bit 13 : Write '1' to Disable interrupt for TRIGGERED[13] event */
+#define EGU_INTENCLR_TRIGGERED13_Pos (13UL) /*!< Position of TRIGGERED13 field. */
+#define EGU_INTENCLR_TRIGGERED13_Msk (0x1UL << EGU_INTENCLR_TRIGGERED13_Pos) /*!< Bit mask of TRIGGERED13 field. */
+#define EGU_INTENCLR_TRIGGERED13_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED13_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED13_Clear (1UL) /*!< Disable */
+
+/* Bit 12 : Write '1' to Disable interrupt for TRIGGERED[12] event */
+#define EGU_INTENCLR_TRIGGERED12_Pos (12UL) /*!< Position of TRIGGERED12 field. */
+#define EGU_INTENCLR_TRIGGERED12_Msk (0x1UL << EGU_INTENCLR_TRIGGERED12_Pos) /*!< Bit mask of TRIGGERED12 field. */
+#define EGU_INTENCLR_TRIGGERED12_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED12_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED12_Clear (1UL) /*!< Disable */
+
+/* Bit 11 : Write '1' to Disable interrupt for TRIGGERED[11] event */
+#define EGU_INTENCLR_TRIGGERED11_Pos (11UL) /*!< Position of TRIGGERED11 field. */
+#define EGU_INTENCLR_TRIGGERED11_Msk (0x1UL << EGU_INTENCLR_TRIGGERED11_Pos) /*!< Bit mask of TRIGGERED11 field. */
+#define EGU_INTENCLR_TRIGGERED11_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED11_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED11_Clear (1UL) /*!< Disable */
+
+/* Bit 10 : Write '1' to Disable interrupt for TRIGGERED[10] event */
+#define EGU_INTENCLR_TRIGGERED10_Pos (10UL) /*!< Position of TRIGGERED10 field. */
+#define EGU_INTENCLR_TRIGGERED10_Msk (0x1UL << EGU_INTENCLR_TRIGGERED10_Pos) /*!< Bit mask of TRIGGERED10 field. */
+#define EGU_INTENCLR_TRIGGERED10_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED10_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED10_Clear (1UL) /*!< Disable */
+
+/* Bit 9 : Write '1' to Disable interrupt for TRIGGERED[9] event */
+#define EGU_INTENCLR_TRIGGERED9_Pos (9UL) /*!< Position of TRIGGERED9 field. */
+#define EGU_INTENCLR_TRIGGERED9_Msk (0x1UL << EGU_INTENCLR_TRIGGERED9_Pos) /*!< Bit mask of TRIGGERED9 field. */
+#define EGU_INTENCLR_TRIGGERED9_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED9_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED9_Clear (1UL) /*!< Disable */
+
+/* Bit 8 : Write '1' to Disable interrupt for TRIGGERED[8] event */
+#define EGU_INTENCLR_TRIGGERED8_Pos (8UL) /*!< Position of TRIGGERED8 field. */
+#define EGU_INTENCLR_TRIGGERED8_Msk (0x1UL << EGU_INTENCLR_TRIGGERED8_Pos) /*!< Bit mask of TRIGGERED8 field. */
+#define EGU_INTENCLR_TRIGGERED8_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED8_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED8_Clear (1UL) /*!< Disable */
+
+/* Bit 7 : Write '1' to Disable interrupt for TRIGGERED[7] event */
+#define EGU_INTENCLR_TRIGGERED7_Pos (7UL) /*!< Position of TRIGGERED7 field. */
+#define EGU_INTENCLR_TRIGGERED7_Msk (0x1UL << EGU_INTENCLR_TRIGGERED7_Pos) /*!< Bit mask of TRIGGERED7 field. */
+#define EGU_INTENCLR_TRIGGERED7_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED7_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED7_Clear (1UL) /*!< Disable */
+
+/* Bit 6 : Write '1' to Disable interrupt for TRIGGERED[6] event */
+#define EGU_INTENCLR_TRIGGERED6_Pos (6UL) /*!< Position of TRIGGERED6 field. */
+#define EGU_INTENCLR_TRIGGERED6_Msk (0x1UL << EGU_INTENCLR_TRIGGERED6_Pos) /*!< Bit mask of TRIGGERED6 field. */
+#define EGU_INTENCLR_TRIGGERED6_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED6_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED6_Clear (1UL) /*!< Disable */
+
+/* Bit 5 : Write '1' to Disable interrupt for TRIGGERED[5] event */
+#define EGU_INTENCLR_TRIGGERED5_Pos (5UL) /*!< Position of TRIGGERED5 field. */
+#define EGU_INTENCLR_TRIGGERED5_Msk (0x1UL << EGU_INTENCLR_TRIGGERED5_Pos) /*!< Bit mask of TRIGGERED5 field. */
+#define EGU_INTENCLR_TRIGGERED5_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED5_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED5_Clear (1UL) /*!< Disable */
+
+/* Bit 4 : Write '1' to Disable interrupt for TRIGGERED[4] event */
+#define EGU_INTENCLR_TRIGGERED4_Pos (4UL) /*!< Position of TRIGGERED4 field. */
+#define EGU_INTENCLR_TRIGGERED4_Msk (0x1UL << EGU_INTENCLR_TRIGGERED4_Pos) /*!< Bit mask of TRIGGERED4 field. */
+#define EGU_INTENCLR_TRIGGERED4_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED4_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED4_Clear (1UL) /*!< Disable */
+
+/* Bit 3 : Write '1' to Disable interrupt for TRIGGERED[3] event */
+#define EGU_INTENCLR_TRIGGERED3_Pos (3UL) /*!< Position of TRIGGERED3 field. */
+#define EGU_INTENCLR_TRIGGERED3_Msk (0x1UL << EGU_INTENCLR_TRIGGERED3_Pos) /*!< Bit mask of TRIGGERED3 field. */
+#define EGU_INTENCLR_TRIGGERED3_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED3_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED3_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for TRIGGERED[2] event */
+#define EGU_INTENCLR_TRIGGERED2_Pos (2UL) /*!< Position of TRIGGERED2 field. */
+#define EGU_INTENCLR_TRIGGERED2_Msk (0x1UL << EGU_INTENCLR_TRIGGERED2_Pos) /*!< Bit mask of TRIGGERED2 field. */
+#define EGU_INTENCLR_TRIGGERED2_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED2_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED2_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for TRIGGERED[1] event */
+#define EGU_INTENCLR_TRIGGERED1_Pos (1UL) /*!< Position of TRIGGERED1 field. */
+#define EGU_INTENCLR_TRIGGERED1_Msk (0x1UL << EGU_INTENCLR_TRIGGERED1_Pos) /*!< Bit mask of TRIGGERED1 field. */
+#define EGU_INTENCLR_TRIGGERED1_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED1_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED1_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for TRIGGERED[0] event */
+#define EGU_INTENCLR_TRIGGERED0_Pos (0UL) /*!< Position of TRIGGERED0 field. */
+#define EGU_INTENCLR_TRIGGERED0_Msk (0x1UL << EGU_INTENCLR_TRIGGERED0_Pos) /*!< Bit mask of TRIGGERED0 field. */
+#define EGU_INTENCLR_TRIGGERED0_Disabled (0UL) /*!< Read: Disabled */
+#define EGU_INTENCLR_TRIGGERED0_Enabled (1UL) /*!< Read: Enabled */
+#define EGU_INTENCLR_TRIGGERED0_Clear (1UL) /*!< Disable */
+
+
+/* Peripheral: FICR */
+/* Description: Factory Information Configuration Registers */
+
+/* Register: FICR_CODEPAGESIZE */
+/* Description: Code memory page size */
+
+/* Bits 31..0 : Code memory page size */
+#define FICR_CODEPAGESIZE_CODEPAGESIZE_Pos (0UL) /*!< Position of CODEPAGESIZE field. */
+#define FICR_CODEPAGESIZE_CODEPAGESIZE_Msk (0xFFFFFFFFUL << FICR_CODEPAGESIZE_CODEPAGESIZE_Pos) /*!< Bit mask of CODEPAGESIZE field. */
+
+/* Register: FICR_CODESIZE */
+/* Description: Code memory size */
+
+/* Bits 31..0 : Code memory size in number of pages */
+#define FICR_CODESIZE_CODESIZE_Pos (0UL) /*!< Position of CODESIZE field. */
+#define FICR_CODESIZE_CODESIZE_Msk (0xFFFFFFFFUL << FICR_CODESIZE_CODESIZE_Pos) /*!< Bit mask of CODESIZE field. */
+
+/* Register: FICR_DEVICEID */
+/* Description: Description collection[0]: Device identifier */
+
+/* Bits 31..0 : 64 bit unique device identifier */
+#define FICR_DEVICEID_DEVICEID_Pos (0UL) /*!< Position of DEVICEID field. */
+#define FICR_DEVICEID_DEVICEID_Msk (0xFFFFFFFFUL << FICR_DEVICEID_DEVICEID_Pos) /*!< Bit mask of DEVICEID field. */
+
+/* Register: FICR_ER */
+/* Description: Description collection[0]: Encryption Root, word 0 */
+
+/* Bits 31..0 : Encryption Root, word n */
+#define FICR_ER_ER_Pos (0UL) /*!< Position of ER field. */
+#define FICR_ER_ER_Msk (0xFFFFFFFFUL << FICR_ER_ER_Pos) /*!< Bit mask of ER field. */
+
+/* Register: FICR_IR */
+/* Description: Description collection[0]: Identity Root, word 0 */
+
+/* Bits 31..0 : Identity Root, word n */
+#define FICR_IR_IR_Pos (0UL) /*!< Position of IR field. */
+#define FICR_IR_IR_Msk (0xFFFFFFFFUL << FICR_IR_IR_Pos) /*!< Bit mask of IR field. */
+
+/* Register: FICR_DEVICEADDRTYPE */
+/* Description: Device address type */
+
+/* Bit 0 : Device address type */
+#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos (0UL) /*!< Position of DEVICEADDRTYPE field. */
+#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Msk (0x1UL << FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos) /*!< Bit mask of DEVICEADDRTYPE field. */
+#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Public (0UL) /*!< Public address */
+#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Random (1UL) /*!< Random address */
+
+/* Register: FICR_DEVICEADDR */
+/* Description: Description collection[0]: Device address 0 */
+
+/* Bits 31..0 : 48 bit device address */
+#define FICR_DEVICEADDR_DEVICEADDR_Pos (0UL) /*!< Position of DEVICEADDR field. */
+#define FICR_DEVICEADDR_DEVICEADDR_Msk (0xFFFFFFFFUL << FICR_DEVICEADDR_DEVICEADDR_Pos) /*!< Bit mask of DEVICEADDR field. */
+
+/* Register: FICR_INFO_PART */
+/* Description: Part code */
+
+/* Bits 31..0 : Part code */
+#define FICR_INFO_PART_PART_Pos (0UL) /*!< Position of PART field. */
+#define FICR_INFO_PART_PART_Msk (0xFFFFFFFFUL << FICR_INFO_PART_PART_Pos) /*!< Bit mask of PART field. */
+#define FICR_INFO_PART_PART_N52832 (0x52832UL) /*!< nRF52832 */
+#define FICR_INFO_PART_PART_Unspecified (0xFFFFFFFFUL) /*!< Unspecified */
+
+/* Register: FICR_INFO_VARIANT */
+/* Description: Part Variant, Hardware version and Production configuration */
+
+/* Bits 31..0 : Part Variant, Hardware version and Production configuration, encoded as ASCII */
+#define FICR_INFO_VARIANT_VARIANT_Pos (0UL) /*!< Position of VARIANT field. */
+#define FICR_INFO_VARIANT_VARIANT_Msk (0xFFFFFFFFUL << FICR_INFO_VARIANT_VARIANT_Pos) /*!< Bit mask of VARIANT field. */
+#define FICR_INFO_VARIANT_VARIANT_AAAA (0x41414141UL) /*!< AAAA */
+#define FICR_INFO_VARIANT_VARIANT_AAAB (0x41414142UL) /*!< AAAB */
+#define FICR_INFO_VARIANT_VARIANT_AABA (0x41414241UL) /*!< AABA */
+#define FICR_INFO_VARIANT_VARIANT_AABB (0x41414242UL) /*!< AABB */
+#define FICR_INFO_VARIANT_VARIANT_Unspecified (0xFFFFFFFFUL) /*!< Unspecified */
+
+/* Register: FICR_INFO_PACKAGE */
+/* Description: Package option */
+
+/* Bits 31..0 : Package option */
+#define FICR_INFO_PACKAGE_PACKAGE_Pos (0UL) /*!< Position of PACKAGE field. */
+#define FICR_INFO_PACKAGE_PACKAGE_Msk (0xFFFFFFFFUL << FICR_INFO_PACKAGE_PACKAGE_Pos) /*!< Bit mask of PACKAGE field. */
+#define FICR_INFO_PACKAGE_PACKAGE_QF (0x2000UL) /*!< QFxx - 48-pin QFN */
+#define FICR_INFO_PACKAGE_PACKAGE_CH (0x2001UL) /*!< CHxx - 7x8 WLCSP 56 balls */
+#define FICR_INFO_PACKAGE_PACKAGE_Unspecified (0xFFFFFFFFUL) /*!< Unspecified */
+
+/* Register: FICR_INFO_RAM */
+/* Description: RAM variant */
+
+/* Bits 31..0 : RAM variant */
+#define FICR_INFO_RAM_RAM_Pos (0UL) /*!< Position of RAM field. */
+#define FICR_INFO_RAM_RAM_Msk (0xFFFFFFFFUL << FICR_INFO_RAM_RAM_Pos) /*!< Bit mask of RAM field. */
+#define FICR_INFO_RAM_RAM_K16 (0x10UL) /*!< 16 kByte RAM */
+#define FICR_INFO_RAM_RAM_K32 (0x20UL) /*!< 32 kByte RAM */
+#define FICR_INFO_RAM_RAM_K64 (0x40UL) /*!< 64 kByte RAM */
+#define FICR_INFO_RAM_RAM_Unspecified (0xFFFFFFFFUL) /*!< Unspecified */
+
+/* Register: FICR_INFO_FLASH */
+/* Description: Flash variant */
+
+/* Bits 31..0 : Flash variant */
+#define FICR_INFO_FLASH_FLASH_Pos (0UL) /*!< Position of FLASH field. */
+#define FICR_INFO_FLASH_FLASH_Msk (0xFFFFFFFFUL << FICR_INFO_FLASH_FLASH_Pos) /*!< Bit mask of FLASH field. */
+#define FICR_INFO_FLASH_FLASH_K128 (0x80UL) /*!< 128 kByte FLASH */
+#define FICR_INFO_FLASH_FLASH_K256 (0x100UL) /*!< 256 kByte FLASH */
+#define FICR_INFO_FLASH_FLASH_K512 (0x200UL) /*!< 512 kByte FLASH */
+#define FICR_INFO_FLASH_FLASH_Unspecified (0xFFFFFFFFUL) /*!< Unspecified */
+
+/* Register: FICR_TEMP_A0 */
+/* Description: Slope definition A0. */
+
+/* Bits 11..0 : A (slope definition) register. */
+#define FICR_TEMP_A0_A_Pos (0UL) /*!< Position of A field. */
+#define FICR_TEMP_A0_A_Msk (0xFFFUL << FICR_TEMP_A0_A_Pos) /*!< Bit mask of A field. */
+
+/* Register: FICR_TEMP_A1 */
+/* Description: Slope definition A1. */
+
+/* Bits 11..0 : A (slope definition) register. */
+#define FICR_TEMP_A1_A_Pos (0UL) /*!< Position of A field. */
+#define FICR_TEMP_A1_A_Msk (0xFFFUL << FICR_TEMP_A1_A_Pos) /*!< Bit mask of A field. */
+
+/* Register: FICR_TEMP_A2 */
+/* Description: Slope definition A2. */
+
+/* Bits 11..0 : A (slope definition) register. */
+#define FICR_TEMP_A2_A_Pos (0UL) /*!< Position of A field. */
+#define FICR_TEMP_A2_A_Msk (0xFFFUL << FICR_TEMP_A2_A_Pos) /*!< Bit mask of A field. */
+
+/* Register: FICR_TEMP_A3 */
+/* Description: Slope definition A3. */
+
+/* Bits 11..0 : A (slope definition) register. */
+#define FICR_TEMP_A3_A_Pos (0UL) /*!< Position of A field. */
+#define FICR_TEMP_A3_A_Msk (0xFFFUL << FICR_TEMP_A3_A_Pos) /*!< Bit mask of A field. */
+
+/* Register: FICR_TEMP_A4 */
+/* Description: Slope definition A4. */
+
+/* Bits 11..0 : A (slope definition) register. */
+#define FICR_TEMP_A4_A_Pos (0UL) /*!< Position of A field. */
+#define FICR_TEMP_A4_A_Msk (0xFFFUL << FICR_TEMP_A4_A_Pos) /*!< Bit mask of A field. */
+
+/* Register: FICR_TEMP_A5 */
+/* Description: Slope definition A5. */
+
+/* Bits 11..0 : A (slope definition) register. */
+#define FICR_TEMP_A5_A_Pos (0UL) /*!< Position of A field. */
+#define FICR_TEMP_A5_A_Msk (0xFFFUL << FICR_TEMP_A5_A_Pos) /*!< Bit mask of A field. */
+
+/* Register: FICR_TEMP_B0 */
+/* Description: y-intercept B0. */
+
+/* Bits 13..0 : B (y-intercept) */
+#define FICR_TEMP_B0_B_Pos (0UL) /*!< Position of B field. */
+#define FICR_TEMP_B0_B_Msk (0x3FFFUL << FICR_TEMP_B0_B_Pos) /*!< Bit mask of B field. */
+
+/* Register: FICR_TEMP_B1 */
+/* Description: y-intercept B1. */
+
+/* Bits 13..0 : B (y-intercept) */
+#define FICR_TEMP_B1_B_Pos (0UL) /*!< Position of B field. */
+#define FICR_TEMP_B1_B_Msk (0x3FFFUL << FICR_TEMP_B1_B_Pos) /*!< Bit mask of B field. */
+
+/* Register: FICR_TEMP_B2 */
+/* Description: y-intercept B2. */
+
+/* Bits 13..0 : B (y-intercept) */
+#define FICR_TEMP_B2_B_Pos (0UL) /*!< Position of B field. */
+#define FICR_TEMP_B2_B_Msk (0x3FFFUL << FICR_TEMP_B2_B_Pos) /*!< Bit mask of B field. */
+
+/* Register: FICR_TEMP_B3 */
+/* Description: y-intercept B3. */
+
+/* Bits 13..0 : B (y-intercept) */
+#define FICR_TEMP_B3_B_Pos (0UL) /*!< Position of B field. */
+#define FICR_TEMP_B3_B_Msk (0x3FFFUL << FICR_TEMP_B3_B_Pos) /*!< Bit mask of B field. */
+
+/* Register: FICR_TEMP_B4 */
+/* Description: y-intercept B4. */
+
+/* Bits 13..0 : B (y-intercept) */
+#define FICR_TEMP_B4_B_Pos (0UL) /*!< Position of B field. */
+#define FICR_TEMP_B4_B_Msk (0x3FFFUL << FICR_TEMP_B4_B_Pos) /*!< Bit mask of B field. */
+
+/* Register: FICR_TEMP_B5 */
+/* Description: y-intercept B5. */
+
+/* Bits 13..0 : B (y-intercept) */
+#define FICR_TEMP_B5_B_Pos (0UL) /*!< Position of B field. */
+#define FICR_TEMP_B5_B_Msk (0x3FFFUL << FICR_TEMP_B5_B_Pos) /*!< Bit mask of B field. */
+
+/* Register: FICR_TEMP_T0 */
+/* Description: Segment end T0. */
+
+/* Bits 7..0 : T (segment end)register. */
+#define FICR_TEMP_T0_T_Pos (0UL) /*!< Position of T field. */
+#define FICR_TEMP_T0_T_Msk (0xFFUL << FICR_TEMP_T0_T_Pos) /*!< Bit mask of T field. */
+
+/* Register: FICR_TEMP_T1 */
+/* Description: Segment end T1. */
+
+/* Bits 7..0 : T (segment end)register. */
+#define FICR_TEMP_T1_T_Pos (0UL) /*!< Position of T field. */
+#define FICR_TEMP_T1_T_Msk (0xFFUL << FICR_TEMP_T1_T_Pos) /*!< Bit mask of T field. */
+
+/* Register: FICR_TEMP_T2 */
+/* Description: Segment end T2. */
+
+/* Bits 7..0 : T (segment end)register. */
+#define FICR_TEMP_T2_T_Pos (0UL) /*!< Position of T field. */
+#define FICR_TEMP_T2_T_Msk (0xFFUL << FICR_TEMP_T2_T_Pos) /*!< Bit mask of T field. */
+
+/* Register: FICR_TEMP_T3 */
+/* Description: Segment end T3. */
+
+/* Bits 7..0 : T (segment end)register. */
+#define FICR_TEMP_T3_T_Pos (0UL) /*!< Position of T field. */
+#define FICR_TEMP_T3_T_Msk (0xFFUL << FICR_TEMP_T3_T_Pos) /*!< Bit mask of T field. */
+
+/* Register: FICR_TEMP_T4 */
+/* Description: Segment end T4. */
+
+/* Bits 7..0 : T (segment end)register. */
+#define FICR_TEMP_T4_T_Pos (0UL) /*!< Position of T field. */
+#define FICR_TEMP_T4_T_Msk (0xFFUL << FICR_TEMP_T4_T_Pos) /*!< Bit mask of T field. */
+
+/* Register: FICR_NFC_TAGHEADER0 */
+/* Description: Default header for NFC Tag. Software can read these values to populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST. */
+
+/* Bits 31..24 : Unique identifier byte 3 */
+#define FICR_NFC_TAGHEADER0_UD3_Pos (24UL) /*!< Position of UD3 field. */
+#define FICR_NFC_TAGHEADER0_UD3_Msk (0xFFUL << FICR_NFC_TAGHEADER0_UD3_Pos) /*!< Bit mask of UD3 field. */
+
+/* Bits 23..16 : Unique identifier byte 2 */
+#define FICR_NFC_TAGHEADER0_UD2_Pos (16UL) /*!< Position of UD2 field. */
+#define FICR_NFC_TAGHEADER0_UD2_Msk (0xFFUL << FICR_NFC_TAGHEADER0_UD2_Pos) /*!< Bit mask of UD2 field. */
+
+/* Bits 15..8 : Unique identifier byte 1 */
+#define FICR_NFC_TAGHEADER0_UD1_Pos (8UL) /*!< Position of UD1 field. */
+#define FICR_NFC_TAGHEADER0_UD1_Msk (0xFFUL << FICR_NFC_TAGHEADER0_UD1_Pos) /*!< Bit mask of UD1 field. */
+
+/* Bits 7..0 : Default Manufacturer ID: Nordic Semiconductor ASA has ICM 0x5F */
+#define FICR_NFC_TAGHEADER0_MFGID_Pos (0UL) /*!< Position of MFGID field. */
+#define FICR_NFC_TAGHEADER0_MFGID_Msk (0xFFUL << FICR_NFC_TAGHEADER0_MFGID_Pos) /*!< Bit mask of MFGID field. */
+
+/* Register: FICR_NFC_TAGHEADER1 */
+/* Description: Default header for NFC Tag. Software can read these values to populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST. */
+
+/* Bits 31..24 : Unique identifier byte 7 */
+#define FICR_NFC_TAGHEADER1_UD7_Pos (24UL) /*!< Position of UD7 field. */
+#define FICR_NFC_TAGHEADER1_UD7_Msk (0xFFUL << FICR_NFC_TAGHEADER1_UD7_Pos) /*!< Bit mask of UD7 field. */
+
+/* Bits 23..16 : Unique identifier byte 6 */
+#define FICR_NFC_TAGHEADER1_UD6_Pos (16UL) /*!< Position of UD6 field. */
+#define FICR_NFC_TAGHEADER1_UD6_Msk (0xFFUL << FICR_NFC_TAGHEADER1_UD6_Pos) /*!< Bit mask of UD6 field. */
+
+/* Bits 15..8 : Unique identifier byte 5 */
+#define FICR_NFC_TAGHEADER1_UD5_Pos (8UL) /*!< Position of UD5 field. */
+#define FICR_NFC_TAGHEADER1_UD5_Msk (0xFFUL << FICR_NFC_TAGHEADER1_UD5_Pos) /*!< Bit mask of UD5 field. */
+
+/* Bits 7..0 : Unique identifier byte 4 */
+#define FICR_NFC_TAGHEADER1_UD4_Pos (0UL) /*!< Position of UD4 field. */
+#define FICR_NFC_TAGHEADER1_UD4_Msk (0xFFUL << FICR_NFC_TAGHEADER1_UD4_Pos) /*!< Bit mask of UD4 field. */
+
+/* Register: FICR_NFC_TAGHEADER2 */
+/* Description: Default header for NFC Tag. Software can read these values to populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST. */
+
+/* Bits 31..24 : Unique identifier byte 11 */
+#define FICR_NFC_TAGHEADER2_UD11_Pos (24UL) /*!< Position of UD11 field. */
+#define FICR_NFC_TAGHEADER2_UD11_Msk (0xFFUL << FICR_NFC_TAGHEADER2_UD11_Pos) /*!< Bit mask of UD11 field. */
+
+/* Bits 23..16 : Unique identifier byte 10 */
+#define FICR_NFC_TAGHEADER2_UD10_Pos (16UL) /*!< Position of UD10 field. */
+#define FICR_NFC_TAGHEADER2_UD10_Msk (0xFFUL << FICR_NFC_TAGHEADER2_UD10_Pos) /*!< Bit mask of UD10 field. */
+
+/* Bits 15..8 : Unique identifier byte 9 */
+#define FICR_NFC_TAGHEADER2_UD9_Pos (8UL) /*!< Position of UD9 field. */
+#define FICR_NFC_TAGHEADER2_UD9_Msk (0xFFUL << FICR_NFC_TAGHEADER2_UD9_Pos) /*!< Bit mask of UD9 field. */
+
+/* Bits 7..0 : Unique identifier byte 8 */
+#define FICR_NFC_TAGHEADER2_UD8_Pos (0UL) /*!< Position of UD8 field. */
+#define FICR_NFC_TAGHEADER2_UD8_Msk (0xFFUL << FICR_NFC_TAGHEADER2_UD8_Pos) /*!< Bit mask of UD8 field. */
+
+/* Register: FICR_NFC_TAGHEADER3 */
+/* Description: Default header for NFC Tag. Software can read these values to populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST. */
+
+/* Bits 31..24 : Unique identifier byte 15 */
+#define FICR_NFC_TAGHEADER3_UD15_Pos (24UL) /*!< Position of UD15 field. */
+#define FICR_NFC_TAGHEADER3_UD15_Msk (0xFFUL << FICR_NFC_TAGHEADER3_UD15_Pos) /*!< Bit mask of UD15 field. */
+
+/* Bits 23..16 : Unique identifier byte 14 */
+#define FICR_NFC_TAGHEADER3_UD14_Pos (16UL) /*!< Position of UD14 field. */
+#define FICR_NFC_TAGHEADER3_UD14_Msk (0xFFUL << FICR_NFC_TAGHEADER3_UD14_Pos) /*!< Bit mask of UD14 field. */
+
+/* Bits 15..8 : Unique identifier byte 13 */
+#define FICR_NFC_TAGHEADER3_UD13_Pos (8UL) /*!< Position of UD13 field. */
+#define FICR_NFC_TAGHEADER3_UD13_Msk (0xFFUL << FICR_NFC_TAGHEADER3_UD13_Pos) /*!< Bit mask of UD13 field. */
+
+/* Bits 7..0 : Unique identifier byte 12 */
+#define FICR_NFC_TAGHEADER3_UD12_Pos (0UL) /*!< Position of UD12 field. */
+#define FICR_NFC_TAGHEADER3_UD12_Msk (0xFFUL << FICR_NFC_TAGHEADER3_UD12_Pos) /*!< Bit mask of UD12 field. */
+
+
+/* Peripheral: GPIOTE */
+/* Description: GPIO Tasks and Events */
+
+/* Register: GPIOTE_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 31 : Write '1' to Enable interrupt for PORT event */
+#define GPIOTE_INTENSET_PORT_Pos (31UL) /*!< Position of PORT field. */
+#define GPIOTE_INTENSET_PORT_Msk (0x1UL << GPIOTE_INTENSET_PORT_Pos) /*!< Bit mask of PORT field. */
+#define GPIOTE_INTENSET_PORT_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENSET_PORT_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENSET_PORT_Set (1UL) /*!< Enable */
+
+/* Bit 7 : Write '1' to Enable interrupt for IN[7] event */
+#define GPIOTE_INTENSET_IN7_Pos (7UL) /*!< Position of IN7 field. */
+#define GPIOTE_INTENSET_IN7_Msk (0x1UL << GPIOTE_INTENSET_IN7_Pos) /*!< Bit mask of IN7 field. */
+#define GPIOTE_INTENSET_IN7_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENSET_IN7_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENSET_IN7_Set (1UL) /*!< Enable */
+
+/* Bit 6 : Write '1' to Enable interrupt for IN[6] event */
+#define GPIOTE_INTENSET_IN6_Pos (6UL) /*!< Position of IN6 field. */
+#define GPIOTE_INTENSET_IN6_Msk (0x1UL << GPIOTE_INTENSET_IN6_Pos) /*!< Bit mask of IN6 field. */
+#define GPIOTE_INTENSET_IN6_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENSET_IN6_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENSET_IN6_Set (1UL) /*!< Enable */
+
+/* Bit 5 : Write '1' to Enable interrupt for IN[5] event */
+#define GPIOTE_INTENSET_IN5_Pos (5UL) /*!< Position of IN5 field. */
+#define GPIOTE_INTENSET_IN5_Msk (0x1UL << GPIOTE_INTENSET_IN5_Pos) /*!< Bit mask of IN5 field. */
+#define GPIOTE_INTENSET_IN5_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENSET_IN5_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENSET_IN5_Set (1UL) /*!< Enable */
+
+/* Bit 4 : Write '1' to Enable interrupt for IN[4] event */
+#define GPIOTE_INTENSET_IN4_Pos (4UL) /*!< Position of IN4 field. */
+#define GPIOTE_INTENSET_IN4_Msk (0x1UL << GPIOTE_INTENSET_IN4_Pos) /*!< Bit mask of IN4 field. */
+#define GPIOTE_INTENSET_IN4_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENSET_IN4_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENSET_IN4_Set (1UL) /*!< Enable */
+
+/* Bit 3 : Write '1' to Enable interrupt for IN[3] event */
+#define GPIOTE_INTENSET_IN3_Pos (3UL) /*!< Position of IN3 field. */
+#define GPIOTE_INTENSET_IN3_Msk (0x1UL << GPIOTE_INTENSET_IN3_Pos) /*!< Bit mask of IN3 field. */
+#define GPIOTE_INTENSET_IN3_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENSET_IN3_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENSET_IN3_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for IN[2] event */
+#define GPIOTE_INTENSET_IN2_Pos (2UL) /*!< Position of IN2 field. */
+#define GPIOTE_INTENSET_IN2_Msk (0x1UL << GPIOTE_INTENSET_IN2_Pos) /*!< Bit mask of IN2 field. */
+#define GPIOTE_INTENSET_IN2_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENSET_IN2_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENSET_IN2_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for IN[1] event */
+#define GPIOTE_INTENSET_IN1_Pos (1UL) /*!< Position of IN1 field. */
+#define GPIOTE_INTENSET_IN1_Msk (0x1UL << GPIOTE_INTENSET_IN1_Pos) /*!< Bit mask of IN1 field. */
+#define GPIOTE_INTENSET_IN1_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENSET_IN1_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENSET_IN1_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for IN[0] event */
+#define GPIOTE_INTENSET_IN0_Pos (0UL) /*!< Position of IN0 field. */
+#define GPIOTE_INTENSET_IN0_Msk (0x1UL << GPIOTE_INTENSET_IN0_Pos) /*!< Bit mask of IN0 field. */
+#define GPIOTE_INTENSET_IN0_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENSET_IN0_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENSET_IN0_Set (1UL) /*!< Enable */
+
+/* Register: GPIOTE_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 31 : Write '1' to Disable interrupt for PORT event */
+#define GPIOTE_INTENCLR_PORT_Pos (31UL) /*!< Position of PORT field. */
+#define GPIOTE_INTENCLR_PORT_Msk (0x1UL << GPIOTE_INTENCLR_PORT_Pos) /*!< Bit mask of PORT field. */
+#define GPIOTE_INTENCLR_PORT_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENCLR_PORT_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENCLR_PORT_Clear (1UL) /*!< Disable */
+
+/* Bit 7 : Write '1' to Disable interrupt for IN[7] event */
+#define GPIOTE_INTENCLR_IN7_Pos (7UL) /*!< Position of IN7 field. */
+#define GPIOTE_INTENCLR_IN7_Msk (0x1UL << GPIOTE_INTENCLR_IN7_Pos) /*!< Bit mask of IN7 field. */
+#define GPIOTE_INTENCLR_IN7_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENCLR_IN7_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENCLR_IN7_Clear (1UL) /*!< Disable */
+
+/* Bit 6 : Write '1' to Disable interrupt for IN[6] event */
+#define GPIOTE_INTENCLR_IN6_Pos (6UL) /*!< Position of IN6 field. */
+#define GPIOTE_INTENCLR_IN6_Msk (0x1UL << GPIOTE_INTENCLR_IN6_Pos) /*!< Bit mask of IN6 field. */
+#define GPIOTE_INTENCLR_IN6_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENCLR_IN6_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENCLR_IN6_Clear (1UL) /*!< Disable */
+
+/* Bit 5 : Write '1' to Disable interrupt for IN[5] event */
+#define GPIOTE_INTENCLR_IN5_Pos (5UL) /*!< Position of IN5 field. */
+#define GPIOTE_INTENCLR_IN5_Msk (0x1UL << GPIOTE_INTENCLR_IN5_Pos) /*!< Bit mask of IN5 field. */
+#define GPIOTE_INTENCLR_IN5_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENCLR_IN5_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENCLR_IN5_Clear (1UL) /*!< Disable */
+
+/* Bit 4 : Write '1' to Disable interrupt for IN[4] event */
+#define GPIOTE_INTENCLR_IN4_Pos (4UL) /*!< Position of IN4 field. */
+#define GPIOTE_INTENCLR_IN4_Msk (0x1UL << GPIOTE_INTENCLR_IN4_Pos) /*!< Bit mask of IN4 field. */
+#define GPIOTE_INTENCLR_IN4_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENCLR_IN4_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENCLR_IN4_Clear (1UL) /*!< Disable */
+
+/* Bit 3 : Write '1' to Disable interrupt for IN[3] event */
+#define GPIOTE_INTENCLR_IN3_Pos (3UL) /*!< Position of IN3 field. */
+#define GPIOTE_INTENCLR_IN3_Msk (0x1UL << GPIOTE_INTENCLR_IN3_Pos) /*!< Bit mask of IN3 field. */
+#define GPIOTE_INTENCLR_IN3_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENCLR_IN3_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENCLR_IN3_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for IN[2] event */
+#define GPIOTE_INTENCLR_IN2_Pos (2UL) /*!< Position of IN2 field. */
+#define GPIOTE_INTENCLR_IN2_Msk (0x1UL << GPIOTE_INTENCLR_IN2_Pos) /*!< Bit mask of IN2 field. */
+#define GPIOTE_INTENCLR_IN2_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENCLR_IN2_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENCLR_IN2_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for IN[1] event */
+#define GPIOTE_INTENCLR_IN1_Pos (1UL) /*!< Position of IN1 field. */
+#define GPIOTE_INTENCLR_IN1_Msk (0x1UL << GPIOTE_INTENCLR_IN1_Pos) /*!< Bit mask of IN1 field. */
+#define GPIOTE_INTENCLR_IN1_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENCLR_IN1_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENCLR_IN1_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for IN[0] event */
+#define GPIOTE_INTENCLR_IN0_Pos (0UL) /*!< Position of IN0 field. */
+#define GPIOTE_INTENCLR_IN0_Msk (0x1UL << GPIOTE_INTENCLR_IN0_Pos) /*!< Bit mask of IN0 field. */
+#define GPIOTE_INTENCLR_IN0_Disabled (0UL) /*!< Read: Disabled */
+#define GPIOTE_INTENCLR_IN0_Enabled (1UL) /*!< Read: Enabled */
+#define GPIOTE_INTENCLR_IN0_Clear (1UL) /*!< Disable */
+
+/* Register: GPIOTE_CONFIG */
+/* Description: Description collection[0]: Configuration for OUT[n], SET[n] and CLR[n] tasks and IN[n] event */
+
+/* Bit 20 : When in task mode: Initial value of the output when the GPIOTE channel is configured. When in event mode: No effect. */
+#define GPIOTE_CONFIG_OUTINIT_Pos (20UL) /*!< Position of OUTINIT field. */
+#define GPIOTE_CONFIG_OUTINIT_Msk (0x1UL << GPIOTE_CONFIG_OUTINIT_Pos) /*!< Bit mask of OUTINIT field. */
+#define GPIOTE_CONFIG_OUTINIT_Low (0UL) /*!< Task mode: Initial value of pin before task triggering is low */
+#define GPIOTE_CONFIG_OUTINIT_High (1UL) /*!< Task mode: Initial value of pin before task triggering is high */
+
+/* Bits 17..16 : When In task mode: Operation to be performed on output when OUT[n] task is triggered. When In event mode: Operation on input that shall trigger IN[n] event. */
+#define GPIOTE_CONFIG_POLARITY_Pos (16UL) /*!< Position of POLARITY field. */
+#define GPIOTE_CONFIG_POLARITY_Msk (0x3UL << GPIOTE_CONFIG_POLARITY_Pos) /*!< Bit mask of POLARITY field. */
+#define GPIOTE_CONFIG_POLARITY_None (0UL) /*!< Task mode: No effect on pin from OUT[n] task. Event mode: no IN[n] event generated on pin activity. */
+#define GPIOTE_CONFIG_POLARITY_LoToHi (1UL) /*!< Task mode: Set pin from OUT[n] task. Event mode: Generate IN[n] event when rising edge on pin. */
+#define GPIOTE_CONFIG_POLARITY_HiToLo (2UL) /*!< Task mode: Clear pin from OUT[n] task. Event mode: Generate IN[n] event when falling edge on pin. */
+#define GPIOTE_CONFIG_POLARITY_Toggle (3UL) /*!< Task mode: Toggle pin from OUT[n]. Event mode: Generate IN[n] when any change on pin. */
+
+/* Bits 12..8 : GPIO number associated with SET[n], CLR[n] and OUT[n] tasks and IN[n] event */
+#define GPIOTE_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */
+#define GPIOTE_CONFIG_PSEL_Msk (0x1FUL << GPIOTE_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */
+
+/* Bits 1..0 : Mode */
+#define GPIOTE_CONFIG_MODE_Pos (0UL) /*!< Position of MODE field. */
+#define GPIOTE_CONFIG_MODE_Msk (0x3UL << GPIOTE_CONFIG_MODE_Pos) /*!< Bit mask of MODE field. */
+#define GPIOTE_CONFIG_MODE_Disabled (0UL) /*!< Disabled. Pin specified by PSEL will not be acquired by the GPIOTE module. */
+#define GPIOTE_CONFIG_MODE_Event (1UL) /*!< Event mode */
+#define GPIOTE_CONFIG_MODE_Task (3UL) /*!< Task mode */
+
+
+/* Peripheral: I2S */
+/* Description: Inter-IC Sound */
+
+/* Register: I2S_INTEN */
+/* Description: Enable or disable interrupt */
+
+/* Bit 5 : Enable or disable interrupt for TXPTRUPD event */
+#define I2S_INTEN_TXPTRUPD_Pos (5UL) /*!< Position of TXPTRUPD field. */
+#define I2S_INTEN_TXPTRUPD_Msk (0x1UL << I2S_INTEN_TXPTRUPD_Pos) /*!< Bit mask of TXPTRUPD field. */
+#define I2S_INTEN_TXPTRUPD_Disabled (0UL) /*!< Disable */
+#define I2S_INTEN_TXPTRUPD_Enabled (1UL) /*!< Enable */
+
+/* Bit 2 : Enable or disable interrupt for STOPPED event */
+#define I2S_INTEN_STOPPED_Pos (2UL) /*!< Position of STOPPED field. */
+#define I2S_INTEN_STOPPED_Msk (0x1UL << I2S_INTEN_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define I2S_INTEN_STOPPED_Disabled (0UL) /*!< Disable */
+#define I2S_INTEN_STOPPED_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable interrupt for RXPTRUPD event */
+#define I2S_INTEN_RXPTRUPD_Pos (1UL) /*!< Position of RXPTRUPD field. */
+#define I2S_INTEN_RXPTRUPD_Msk (0x1UL << I2S_INTEN_RXPTRUPD_Pos) /*!< Bit mask of RXPTRUPD field. */
+#define I2S_INTEN_RXPTRUPD_Disabled (0UL) /*!< Disable */
+#define I2S_INTEN_RXPTRUPD_Enabled (1UL) /*!< Enable */
+
+/* Register: I2S_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 5 : Write '1' to Enable interrupt for TXPTRUPD event */
+#define I2S_INTENSET_TXPTRUPD_Pos (5UL) /*!< Position of TXPTRUPD field. */
+#define I2S_INTENSET_TXPTRUPD_Msk (0x1UL << I2S_INTENSET_TXPTRUPD_Pos) /*!< Bit mask of TXPTRUPD field. */
+#define I2S_INTENSET_TXPTRUPD_Disabled (0UL) /*!< Read: Disabled */
+#define I2S_INTENSET_TXPTRUPD_Enabled (1UL) /*!< Read: Enabled */
+#define I2S_INTENSET_TXPTRUPD_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for STOPPED event */
+#define I2S_INTENSET_STOPPED_Pos (2UL) /*!< Position of STOPPED field. */
+#define I2S_INTENSET_STOPPED_Msk (0x1UL << I2S_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define I2S_INTENSET_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define I2S_INTENSET_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define I2S_INTENSET_STOPPED_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for RXPTRUPD event */
+#define I2S_INTENSET_RXPTRUPD_Pos (1UL) /*!< Position of RXPTRUPD field. */
+#define I2S_INTENSET_RXPTRUPD_Msk (0x1UL << I2S_INTENSET_RXPTRUPD_Pos) /*!< Bit mask of RXPTRUPD field. */
+#define I2S_INTENSET_RXPTRUPD_Disabled (0UL) /*!< Read: Disabled */
+#define I2S_INTENSET_RXPTRUPD_Enabled (1UL) /*!< Read: Enabled */
+#define I2S_INTENSET_RXPTRUPD_Set (1UL) /*!< Enable */
+
+/* Register: I2S_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 5 : Write '1' to Disable interrupt for TXPTRUPD event */
+#define I2S_INTENCLR_TXPTRUPD_Pos (5UL) /*!< Position of TXPTRUPD field. */
+#define I2S_INTENCLR_TXPTRUPD_Msk (0x1UL << I2S_INTENCLR_TXPTRUPD_Pos) /*!< Bit mask of TXPTRUPD field. */
+#define I2S_INTENCLR_TXPTRUPD_Disabled (0UL) /*!< Read: Disabled */
+#define I2S_INTENCLR_TXPTRUPD_Enabled (1UL) /*!< Read: Enabled */
+#define I2S_INTENCLR_TXPTRUPD_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for STOPPED event */
+#define I2S_INTENCLR_STOPPED_Pos (2UL) /*!< Position of STOPPED field. */
+#define I2S_INTENCLR_STOPPED_Msk (0x1UL << I2S_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define I2S_INTENCLR_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define I2S_INTENCLR_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define I2S_INTENCLR_STOPPED_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for RXPTRUPD event */
+#define I2S_INTENCLR_RXPTRUPD_Pos (1UL) /*!< Position of RXPTRUPD field. */
+#define I2S_INTENCLR_RXPTRUPD_Msk (0x1UL << I2S_INTENCLR_RXPTRUPD_Pos) /*!< Bit mask of RXPTRUPD field. */
+#define I2S_INTENCLR_RXPTRUPD_Disabled (0UL) /*!< Read: Disabled */
+#define I2S_INTENCLR_RXPTRUPD_Enabled (1UL) /*!< Read: Enabled */
+#define I2S_INTENCLR_RXPTRUPD_Clear (1UL) /*!< Disable */
+
+/* Register: I2S_ENABLE */
+/* Description: Enable I2S module. */
+
+/* Bit 0 : Enable I2S module. */
+#define I2S_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define I2S_ENABLE_ENABLE_Msk (0x1UL << I2S_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define I2S_ENABLE_ENABLE_Disabled (0UL) /*!< Disable */
+#define I2S_ENABLE_ENABLE_Enabled (1UL) /*!< Enable */
+
+/* Register: I2S_CONFIG_MODE */
+/* Description: I2S mode. */
+
+/* Bit 0 : I2S mode. */
+#define I2S_CONFIG_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */
+#define I2S_CONFIG_MODE_MODE_Msk (0x1UL << I2S_CONFIG_MODE_MODE_Pos) /*!< Bit mask of MODE field. */
+#define I2S_CONFIG_MODE_MODE_Master (0UL) /*!< Master mode. SCK and LRCK generated from internal master clcok (MCK) and output on pins defined by PSEL.xxx. */
+#define I2S_CONFIG_MODE_MODE_Slave (1UL) /*!< Slave mode. SCK and LRCK generated by external master and received on pins defined by PSEL.xxx */
+
+/* Register: I2S_CONFIG_RXEN */
+/* Description: Reception (RX) enable. */
+
+/* Bit 0 : Reception (RX) enable. */
+#define I2S_CONFIG_RXEN_RXEN_Pos (0UL) /*!< Position of RXEN field. */
+#define I2S_CONFIG_RXEN_RXEN_Msk (0x1UL << I2S_CONFIG_RXEN_RXEN_Pos) /*!< Bit mask of RXEN field. */
+#define I2S_CONFIG_RXEN_RXEN_Disabled (0UL) /*!< Reception disabled and now data will be written to the RXD.PTR address. */
+#define I2S_CONFIG_RXEN_RXEN_Enabled (1UL) /*!< Reception enabled. */
+
+/* Register: I2S_CONFIG_TXEN */
+/* Description: Transmission (TX) enable. */
+
+/* Bit 0 : Transmission (TX) enable. */
+#define I2S_CONFIG_TXEN_TXEN_Pos (0UL) /*!< Position of TXEN field. */
+#define I2S_CONFIG_TXEN_TXEN_Msk (0x1UL << I2S_CONFIG_TXEN_TXEN_Pos) /*!< Bit mask of TXEN field. */
+#define I2S_CONFIG_TXEN_TXEN_Disabled (0UL) /*!< Transmission disabled and now data will be read from the RXD.TXD address. */
+#define I2S_CONFIG_TXEN_TXEN_Enabled (1UL) /*!< Transmission enabled. */
+
+/* Register: I2S_CONFIG_MCKEN */
+/* Description: Master clock generator enable. */
+
+/* Bit 0 : Master clock generator enable. */
+#define I2S_CONFIG_MCKEN_MCKEN_Pos (0UL) /*!< Position of MCKEN field. */
+#define I2S_CONFIG_MCKEN_MCKEN_Msk (0x1UL << I2S_CONFIG_MCKEN_MCKEN_Pos) /*!< Bit mask of MCKEN field. */
+#define I2S_CONFIG_MCKEN_MCKEN_Disabled (0UL) /*!< Master clock generator disabled and PSEL.MCK not connected(available as GPIO). */
+#define I2S_CONFIG_MCKEN_MCKEN_Enabled (1UL) /*!< Master clock generator running and MCK output on PSEL.MCK. */
+
+/* Register: I2S_CONFIG_MCKFREQ */
+/* Description: Master clock generator frequency. */
+
+/* Bits 31..0 : Master clock generator frequency. */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_Pos (0UL) /*!< Position of MCKFREQ field. */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_Msk (0xFFFFFFFFUL << I2S_CONFIG_MCKFREQ_MCKFREQ_Pos) /*!< Bit mask of MCKFREQ field. */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV125 (0x020C0000UL) /*!< 32 MHz / 125 = 0.256 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV63 (0x04100000UL) /*!< 32 MHz / 63 = 0.5079365 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV42 (0x06000000UL) /*!< 32 MHz / 42 = 0.7619048 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV32 (0x08000000UL) /*!< 32 MHz / 32 = 1.0 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV31 (0x08400000UL) /*!< 32 MHz / 31 = 1.0322581 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV30 (0x08800000UL) /*!< 32 MHz / 30 = 1.0666667 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV23 (0x0B000000UL) /*!< 32 MHz / 23 = 1.3913043 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV21 (0x0C000000UL) /*!< 32 MHz / 21 = 1.5238095 */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV16 (0x10000000UL) /*!< 32 MHz / 16 = 2.0 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV15 (0x11000000UL) /*!< 32 MHz / 15 = 2.1333333 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV11 (0x16000000UL) /*!< 32 MHz / 11 = 2.9090909 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV10 (0x18000000UL) /*!< 32 MHz / 10 = 3.2 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV8 (0x20000000UL) /*!< 32 MHz / 8 = 4.0 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV6 (0x28000000UL) /*!< 32 MHz / 6 = 5.3333333 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV5 (0x30000000UL) /*!< 32 MHz / 5 = 6.4 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV4 (0x40000000UL) /*!< 32 MHz / 4 = 8.0 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV3 (0x50000000UL) /*!< 32 MHz / 3 = 10.6666667 MHz */
+#define I2S_CONFIG_MCKFREQ_MCKFREQ_32MDIV2 (0x80000000UL) /*!< 32 MHz / 2 = 16.0 MHz */
+
+/* Register: I2S_CONFIG_RATIO */
+/* Description: MCK / LRCK ratio. */
+
+/* Bits 3..0 : MCK / LRCK ratio. */
+#define I2S_CONFIG_RATIO_RATIO_Pos (0UL) /*!< Position of RATIO field. */
+#define I2S_CONFIG_RATIO_RATIO_Msk (0xFUL << I2S_CONFIG_RATIO_RATIO_Pos) /*!< Bit mask of RATIO field. */
+#define I2S_CONFIG_RATIO_RATIO_32X (0UL) /*!< LRCK = MCK / 32 */
+#define I2S_CONFIG_RATIO_RATIO_48X (1UL) /*!< LRCK = MCK / 48 */
+#define I2S_CONFIG_RATIO_RATIO_64X (2UL) /*!< LRCK = MCK / 64 */
+#define I2S_CONFIG_RATIO_RATIO_96X (3UL) /*!< LRCK = MCK / 96 */
+#define I2S_CONFIG_RATIO_RATIO_128X (4UL) /*!< LRCK = MCK / 128 */
+#define I2S_CONFIG_RATIO_RATIO_192X (5UL) /*!< LRCK = MCK / 192 */
+#define I2S_CONFIG_RATIO_RATIO_256X (6UL) /*!< LRCK = MCK / 256 */
+#define I2S_CONFIG_RATIO_RATIO_384X (7UL) /*!< LRCK = MCK / 384 */
+#define I2S_CONFIG_RATIO_RATIO_512X (8UL) /*!< LRCK = MCK / 512 */
+
+/* Register: I2S_CONFIG_SWIDTH */
+/* Description: Sample width. */
+
+/* Bits 1..0 : Sample width. */
+#define I2S_CONFIG_SWIDTH_SWIDTH_Pos (0UL) /*!< Position of SWIDTH field. */
+#define I2S_CONFIG_SWIDTH_SWIDTH_Msk (0x3UL << I2S_CONFIG_SWIDTH_SWIDTH_Pos) /*!< Bit mask of SWIDTH field. */
+#define I2S_CONFIG_SWIDTH_SWIDTH_8Bit (0UL) /*!< 8 bit. */
+#define I2S_CONFIG_SWIDTH_SWIDTH_16Bit (1UL) /*!< 16 bit. */
+#define I2S_CONFIG_SWIDTH_SWIDTH_24Bit (2UL) /*!< 24 bit. */
+
+/* Register: I2S_CONFIG_ALIGN */
+/* Description: Alignment of sample within a frame. */
+
+/* Bit 0 : Alignment of sample within a frame. */
+#define I2S_CONFIG_ALIGN_ALIGN_Pos (0UL) /*!< Position of ALIGN field. */
+#define I2S_CONFIG_ALIGN_ALIGN_Msk (0x1UL << I2S_CONFIG_ALIGN_ALIGN_Pos) /*!< Bit mask of ALIGN field. */
+#define I2S_CONFIG_ALIGN_ALIGN_Left (0UL) /*!< Left-aligned. */
+#define I2S_CONFIG_ALIGN_ALIGN_Right (1UL) /*!< Right-aligned. */
+
+/* Register: I2S_CONFIG_FORMAT */
+/* Description: Frame format. */
+
+/* Bit 0 : Frame format. */
+#define I2S_CONFIG_FORMAT_FORMAT_Pos (0UL) /*!< Position of FORMAT field. */
+#define I2S_CONFIG_FORMAT_FORMAT_Msk (0x1UL << I2S_CONFIG_FORMAT_FORMAT_Pos) /*!< Bit mask of FORMAT field. */
+#define I2S_CONFIG_FORMAT_FORMAT_I2S (0UL) /*!< Original I2S format. */
+#define I2S_CONFIG_FORMAT_FORMAT_Aligned (1UL) /*!< Alternate (left- or right-aligned) format. */
+
+/* Register: I2S_CONFIG_CHANNELS */
+/* Description: Enable channels. */
+
+/* Bits 1..0 : Enable channels. */
+#define I2S_CONFIG_CHANNELS_CHANNELS_Pos (0UL) /*!< Position of CHANNELS field. */
+#define I2S_CONFIG_CHANNELS_CHANNELS_Msk (0x3UL << I2S_CONFIG_CHANNELS_CHANNELS_Pos) /*!< Bit mask of CHANNELS field. */
+#define I2S_CONFIG_CHANNELS_CHANNELS_Stereo (0UL) /*!< Stereo. */
+#define I2S_CONFIG_CHANNELS_CHANNELS_Left (1UL) /*!< Left only. */
+#define I2S_CONFIG_CHANNELS_CHANNELS_Right (2UL) /*!< Right only. */
+
+/* Register: I2S_RXD_PTR */
+/* Description: Receive buffer RAM start address. */
+
+/* Bits 31..0 : Receive buffer Data RAM start address. When receiving, words containing samples will be written to this address. This address is a word aligned Data RAM address. */
+#define I2S_RXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define I2S_RXD_PTR_PTR_Msk (0xFFFFFFFFUL << I2S_RXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: I2S_TXD_PTR */
+/* Description: Transmit buffer RAM start address. */
+
+/* Bits 31..0 : Transmit buffer Data RAM start address. When transmitting, words containing samples will be fetched from this address. This address is a word aligned Data RAM address. */
+#define I2S_TXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define I2S_TXD_PTR_PTR_Msk (0xFFFFFFFFUL << I2S_TXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: I2S_RXTXD_MAXCNT */
+/* Description: Size of RXD and TXD buffers. */
+
+/* Bits 13..0 : Size of RXD and TXD buffers in number of 32 bit words. */
+#define I2S_RXTXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define I2S_RXTXD_MAXCNT_MAXCNT_Msk (0x3FFFUL << I2S_RXTXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: I2S_PSEL_MCK */
+/* Description: Pin select for MCK signal. */
+
+/* Bit 31 : Connection */
+#define I2S_PSEL_MCK_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define I2S_PSEL_MCK_CONNECT_Msk (0x1UL << I2S_PSEL_MCK_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define I2S_PSEL_MCK_CONNECT_Connected (0UL) /*!< Connect */
+#define I2S_PSEL_MCK_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define I2S_PSEL_MCK_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define I2S_PSEL_MCK_PIN_Msk (0x1FUL << I2S_PSEL_MCK_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: I2S_PSEL_SCK */
+/* Description: Pin select for SCK signal. */
+
+/* Bit 31 : Connection */
+#define I2S_PSEL_SCK_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define I2S_PSEL_SCK_CONNECT_Msk (0x1UL << I2S_PSEL_SCK_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define I2S_PSEL_SCK_CONNECT_Connected (0UL) /*!< Connect */
+#define I2S_PSEL_SCK_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define I2S_PSEL_SCK_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define I2S_PSEL_SCK_PIN_Msk (0x1FUL << I2S_PSEL_SCK_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: I2S_PSEL_LRCK */
+/* Description: Pin select for LRCK signal. */
+
+/* Bit 31 : Connection */
+#define I2S_PSEL_LRCK_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define I2S_PSEL_LRCK_CONNECT_Msk (0x1UL << I2S_PSEL_LRCK_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define I2S_PSEL_LRCK_CONNECT_Connected (0UL) /*!< Connect */
+#define I2S_PSEL_LRCK_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define I2S_PSEL_LRCK_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define I2S_PSEL_LRCK_PIN_Msk (0x1FUL << I2S_PSEL_LRCK_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: I2S_PSEL_SDIN */
+/* Description: Pin select for SDIN signal. */
+
+/* Bit 31 : Connection */
+#define I2S_PSEL_SDIN_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define I2S_PSEL_SDIN_CONNECT_Msk (0x1UL << I2S_PSEL_SDIN_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define I2S_PSEL_SDIN_CONNECT_Connected (0UL) /*!< Connect */
+#define I2S_PSEL_SDIN_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define I2S_PSEL_SDIN_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define I2S_PSEL_SDIN_PIN_Msk (0x1FUL << I2S_PSEL_SDIN_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: I2S_PSEL_SDOUT */
+/* Description: Pin select for SDOUT signal. */
+
+/* Bit 31 : Connection */
+#define I2S_PSEL_SDOUT_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define I2S_PSEL_SDOUT_CONNECT_Msk (0x1UL << I2S_PSEL_SDOUT_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define I2S_PSEL_SDOUT_CONNECT_Connected (0UL) /*!< Connect */
+#define I2S_PSEL_SDOUT_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define I2S_PSEL_SDOUT_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define I2S_PSEL_SDOUT_PIN_Msk (0x1FUL << I2S_PSEL_SDOUT_PIN_Pos) /*!< Bit mask of PIN field. */
+
+
+/* Peripheral: LPCOMP */
+/* Description: Low Power Comparator */
+
+/* Register: LPCOMP_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 4 : Shortcut between CROSS event and STOP task */
+#define LPCOMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */
+#define LPCOMP_SHORTS_CROSS_STOP_Msk (0x1UL << LPCOMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */
+#define LPCOMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define LPCOMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 3 : Shortcut between UP event and STOP task */
+#define LPCOMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */
+#define LPCOMP_SHORTS_UP_STOP_Msk (0x1UL << LPCOMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */
+#define LPCOMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define LPCOMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 2 : Shortcut between DOWN event and STOP task */
+#define LPCOMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */
+#define LPCOMP_SHORTS_DOWN_STOP_Msk (0x1UL << LPCOMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */
+#define LPCOMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define LPCOMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 1 : Shortcut between READY event and STOP task */
+#define LPCOMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */
+#define LPCOMP_SHORTS_READY_STOP_Msk (0x1UL << LPCOMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */
+#define LPCOMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define LPCOMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 0 : Shortcut between READY event and SAMPLE task */
+#define LPCOMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */
+#define LPCOMP_SHORTS_READY_SAMPLE_Msk (0x1UL << LPCOMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */
+#define LPCOMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Disable shortcut */
+#define LPCOMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: LPCOMP_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 3 : Write '1' to Enable interrupt for CROSS event */
+#define LPCOMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */
+#define LPCOMP_INTENSET_CROSS_Msk (0x1UL << LPCOMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */
+#define LPCOMP_INTENSET_CROSS_Disabled (0UL) /*!< Read: Disabled */
+#define LPCOMP_INTENSET_CROSS_Enabled (1UL) /*!< Read: Enabled */
+#define LPCOMP_INTENSET_CROSS_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for UP event */
+#define LPCOMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */
+#define LPCOMP_INTENSET_UP_Msk (0x1UL << LPCOMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */
+#define LPCOMP_INTENSET_UP_Disabled (0UL) /*!< Read: Disabled */
+#define LPCOMP_INTENSET_UP_Enabled (1UL) /*!< Read: Enabled */
+#define LPCOMP_INTENSET_UP_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for DOWN event */
+#define LPCOMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */
+#define LPCOMP_INTENSET_DOWN_Msk (0x1UL << LPCOMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */
+#define LPCOMP_INTENSET_DOWN_Disabled (0UL) /*!< Read: Disabled */
+#define LPCOMP_INTENSET_DOWN_Enabled (1UL) /*!< Read: Enabled */
+#define LPCOMP_INTENSET_DOWN_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for READY event */
+#define LPCOMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */
+#define LPCOMP_INTENSET_READY_Msk (0x1UL << LPCOMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
+#define LPCOMP_INTENSET_READY_Disabled (0UL) /*!< Read: Disabled */
+#define LPCOMP_INTENSET_READY_Enabled (1UL) /*!< Read: Enabled */
+#define LPCOMP_INTENSET_READY_Set (1UL) /*!< Enable */
+
+/* Register: LPCOMP_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 3 : Write '1' to Disable interrupt for CROSS event */
+#define LPCOMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */
+#define LPCOMP_INTENCLR_CROSS_Msk (0x1UL << LPCOMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */
+#define LPCOMP_INTENCLR_CROSS_Disabled (0UL) /*!< Read: Disabled */
+#define LPCOMP_INTENCLR_CROSS_Enabled (1UL) /*!< Read: Enabled */
+#define LPCOMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for UP event */
+#define LPCOMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */
+#define LPCOMP_INTENCLR_UP_Msk (0x1UL << LPCOMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */
+#define LPCOMP_INTENCLR_UP_Disabled (0UL) /*!< Read: Disabled */
+#define LPCOMP_INTENCLR_UP_Enabled (1UL) /*!< Read: Enabled */
+#define LPCOMP_INTENCLR_UP_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for DOWN event */
+#define LPCOMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */
+#define LPCOMP_INTENCLR_DOWN_Msk (0x1UL << LPCOMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */
+#define LPCOMP_INTENCLR_DOWN_Disabled (0UL) /*!< Read: Disabled */
+#define LPCOMP_INTENCLR_DOWN_Enabled (1UL) /*!< Read: Enabled */
+#define LPCOMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for READY event */
+#define LPCOMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */
+#define LPCOMP_INTENCLR_READY_Msk (0x1UL << LPCOMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
+#define LPCOMP_INTENCLR_READY_Disabled (0UL) /*!< Read: Disabled */
+#define LPCOMP_INTENCLR_READY_Enabled (1UL) /*!< Read: Enabled */
+#define LPCOMP_INTENCLR_READY_Clear (1UL) /*!< Disable */
+
+/* Register: LPCOMP_RESULT */
+/* Description: Compare result */
+
+/* Bit 0 : Result of last compare. Decision point SAMPLE task. */
+#define LPCOMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */
+#define LPCOMP_RESULT_RESULT_Msk (0x1UL << LPCOMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */
+#define LPCOMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is below the reference threshold (VIN+ < VIN-). */
+#define LPCOMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold (VIN+ > VIN-). */
+
+/* Register: LPCOMP_ENABLE */
+/* Description: Enable LPCOMP */
+
+/* Bits 1..0 : Enable or disable LPCOMP */
+#define LPCOMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define LPCOMP_ENABLE_ENABLE_Msk (0x3UL << LPCOMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define LPCOMP_ENABLE_ENABLE_Disabled (0UL) /*!< Disable */
+#define LPCOMP_ENABLE_ENABLE_Enabled (1UL) /*!< Enable */
+
+/* Register: LPCOMP_PSEL */
+/* Description: Input pin select */
+
+/* Bits 2..0 : Analog pin select */
+#define LPCOMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */
+#define LPCOMP_PSEL_PSEL_Msk (0x7UL << LPCOMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */
+#define LPCOMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< AIN0 selected as analog input */
+#define LPCOMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< AIN1 selected as analog input */
+#define LPCOMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< AIN2 selected as analog input */
+#define LPCOMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< AIN3 selected as analog input */
+#define LPCOMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< AIN4 selected as analog input */
+#define LPCOMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< AIN5 selected as analog input */
+#define LPCOMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< AIN6 selected as analog input */
+#define LPCOMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< AIN7 selected as analog input */
+
+/* Register: LPCOMP_REFSEL */
+/* Description: Reference select */
+
+/* Bits 3..0 : Reference select */
+#define LPCOMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */
+#define LPCOMP_REFSEL_REFSEL_Msk (0xFUL << LPCOMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */
+#define LPCOMP_REFSEL_REFSEL_Ref1_8Vdd (0UL) /*!< VDD * 1/8 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_Ref2_8Vdd (1UL) /*!< VDD * 2/8 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_Ref3_8Vdd (2UL) /*!< VDD * 3/8 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_Ref4_8Vdd (3UL) /*!< VDD * 4/8 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_Ref5_8Vdd (4UL) /*!< VDD * 5/8 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_Ref6_8Vdd (5UL) /*!< VDD * 6/8 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_Ref7_8Vdd (6UL) /*!< VDD * 7/8 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_ARef (7UL) /*!< External analog reference selected */
+#define LPCOMP_REFSEL_REFSEL_Ref1_16Vdd (8UL) /*!< VDD * 1/16 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_Ref3_16Vdd (9UL) /*!< VDD * 3/16 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_Ref5_16Vdd (10UL) /*!< VDD * 5/16 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_Ref7_16Vdd (11UL) /*!< VDD * 7/16 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_Ref9_16Vdd (12UL) /*!< VDD * 9/16 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_Ref11_16Vdd (13UL) /*!< VDD * 11/16 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_Ref13_16Vdd (14UL) /*!< VDD * 13/16 selected as reference */
+#define LPCOMP_REFSEL_REFSEL_Ref15_16Vdd (15UL) /*!< VDD * 15/16 selected as reference */
+
+/* Register: LPCOMP_EXTREFSEL */
+/* Description: External reference select */
+
+/* Bit 0 : External analog reference select */
+#define LPCOMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */
+#define LPCOMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << LPCOMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */
+#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use AIN0 as external analog reference */
+#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use AIN1 as external analog reference */
+
+/* Register: LPCOMP_ANADETECT */
+/* Description: Analog detect configuration */
+
+/* Bits 1..0 : Analog detect configuration */
+#define LPCOMP_ANADETECT_ANADETECT_Pos (0UL) /*!< Position of ANADETECT field. */
+#define LPCOMP_ANADETECT_ANADETECT_Msk (0x3UL << LPCOMP_ANADETECT_ANADETECT_Pos) /*!< Bit mask of ANADETECT field. */
+#define LPCOMP_ANADETECT_ANADETECT_Cross (0UL) /*!< Generate ANADETECT on crossing, both upward crossing and downward crossing */
+#define LPCOMP_ANADETECT_ANADETECT_Up (1UL) /*!< Generate ANADETECT on upward crossing only */
+#define LPCOMP_ANADETECT_ANADETECT_Down (2UL) /*!< Generate ANADETECT on downward crossing only */
+
+/* Register: LPCOMP_HYST */
+/* Description: Comparator hysteresis enable */
+
+/* Bit 0 : Comparator hysteresis enable */
+#define LPCOMP_HYST_HYST_Pos (0UL) /*!< Position of HYST field. */
+#define LPCOMP_HYST_HYST_Msk (0x1UL << LPCOMP_HYST_HYST_Pos) /*!< Bit mask of HYST field. */
+#define LPCOMP_HYST_HYST_NoHyst (0UL) /*!< Comparator hysteresis disabled */
+#define LPCOMP_HYST_HYST_Hyst50mV (1UL) /*!< Comparator hysteresis disabled (typ. 50 mV) */
+
+
+/* Peripheral: MWU */
+/* Description: Memory Watch Unit */
+
+/* Register: MWU_INTEN */
+/* Description: Enable or disable interrupt */
+
+/* Bit 27 : Enable or disable interrupt for PREGION[1].RA event */
+#define MWU_INTEN_PREGION1RA_Pos (27UL) /*!< Position of PREGION1RA field. */
+#define MWU_INTEN_PREGION1RA_Msk (0x1UL << MWU_INTEN_PREGION1RA_Pos) /*!< Bit mask of PREGION1RA field. */
+#define MWU_INTEN_PREGION1RA_Disabled (0UL) /*!< Disable */
+#define MWU_INTEN_PREGION1RA_Enabled (1UL) /*!< Enable */
+
+/* Bit 26 : Enable or disable interrupt for PREGION[1].WA event */
+#define MWU_INTEN_PREGION1WA_Pos (26UL) /*!< Position of PREGION1WA field. */
+#define MWU_INTEN_PREGION1WA_Msk (0x1UL << MWU_INTEN_PREGION1WA_Pos) /*!< Bit mask of PREGION1WA field. */
+#define MWU_INTEN_PREGION1WA_Disabled (0UL) /*!< Disable */
+#define MWU_INTEN_PREGION1WA_Enabled (1UL) /*!< Enable */
+
+/* Bit 25 : Enable or disable interrupt for PREGION[0].RA event */
+#define MWU_INTEN_PREGION0RA_Pos (25UL) /*!< Position of PREGION0RA field. */
+#define MWU_INTEN_PREGION0RA_Msk (0x1UL << MWU_INTEN_PREGION0RA_Pos) /*!< Bit mask of PREGION0RA field. */
+#define MWU_INTEN_PREGION0RA_Disabled (0UL) /*!< Disable */
+#define MWU_INTEN_PREGION0RA_Enabled (1UL) /*!< Enable */
+
+/* Bit 24 : Enable or disable interrupt for PREGION[0].WA event */
+#define MWU_INTEN_PREGION0WA_Pos (24UL) /*!< Position of PREGION0WA field. */
+#define MWU_INTEN_PREGION0WA_Msk (0x1UL << MWU_INTEN_PREGION0WA_Pos) /*!< Bit mask of PREGION0WA field. */
+#define MWU_INTEN_PREGION0WA_Disabled (0UL) /*!< Disable */
+#define MWU_INTEN_PREGION0WA_Enabled (1UL) /*!< Enable */
+
+/* Bit 7 : Enable or disable interrupt for REGION[3].RA event */
+#define MWU_INTEN_REGION3RA_Pos (7UL) /*!< Position of REGION3RA field. */
+#define MWU_INTEN_REGION3RA_Msk (0x1UL << MWU_INTEN_REGION3RA_Pos) /*!< Bit mask of REGION3RA field. */
+#define MWU_INTEN_REGION3RA_Disabled (0UL) /*!< Disable */
+#define MWU_INTEN_REGION3RA_Enabled (1UL) /*!< Enable */
+
+/* Bit 6 : Enable or disable interrupt for REGION[3].WA event */
+#define MWU_INTEN_REGION3WA_Pos (6UL) /*!< Position of REGION3WA field. */
+#define MWU_INTEN_REGION3WA_Msk (0x1UL << MWU_INTEN_REGION3WA_Pos) /*!< Bit mask of REGION3WA field. */
+#define MWU_INTEN_REGION3WA_Disabled (0UL) /*!< Disable */
+#define MWU_INTEN_REGION3WA_Enabled (1UL) /*!< Enable */
+
+/* Bit 5 : Enable or disable interrupt for REGION[2].RA event */
+#define MWU_INTEN_REGION2RA_Pos (5UL) /*!< Position of REGION2RA field. */
+#define MWU_INTEN_REGION2RA_Msk (0x1UL << MWU_INTEN_REGION2RA_Pos) /*!< Bit mask of REGION2RA field. */
+#define MWU_INTEN_REGION2RA_Disabled (0UL) /*!< Disable */
+#define MWU_INTEN_REGION2RA_Enabled (1UL) /*!< Enable */
+
+/* Bit 4 : Enable or disable interrupt for REGION[2].WA event */
+#define MWU_INTEN_REGION2WA_Pos (4UL) /*!< Position of REGION2WA field. */
+#define MWU_INTEN_REGION2WA_Msk (0x1UL << MWU_INTEN_REGION2WA_Pos) /*!< Bit mask of REGION2WA field. */
+#define MWU_INTEN_REGION2WA_Disabled (0UL) /*!< Disable */
+#define MWU_INTEN_REGION2WA_Enabled (1UL) /*!< Enable */
+
+/* Bit 3 : Enable or disable interrupt for REGION[1].RA event */
+#define MWU_INTEN_REGION1RA_Pos (3UL) /*!< Position of REGION1RA field. */
+#define MWU_INTEN_REGION1RA_Msk (0x1UL << MWU_INTEN_REGION1RA_Pos) /*!< Bit mask of REGION1RA field. */
+#define MWU_INTEN_REGION1RA_Disabled (0UL) /*!< Disable */
+#define MWU_INTEN_REGION1RA_Enabled (1UL) /*!< Enable */
+
+/* Bit 2 : Enable or disable interrupt for REGION[1].WA event */
+#define MWU_INTEN_REGION1WA_Pos (2UL) /*!< Position of REGION1WA field. */
+#define MWU_INTEN_REGION1WA_Msk (0x1UL << MWU_INTEN_REGION1WA_Pos) /*!< Bit mask of REGION1WA field. */
+#define MWU_INTEN_REGION1WA_Disabled (0UL) /*!< Disable */
+#define MWU_INTEN_REGION1WA_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable interrupt for REGION[0].RA event */
+#define MWU_INTEN_REGION0RA_Pos (1UL) /*!< Position of REGION0RA field. */
+#define MWU_INTEN_REGION0RA_Msk (0x1UL << MWU_INTEN_REGION0RA_Pos) /*!< Bit mask of REGION0RA field. */
+#define MWU_INTEN_REGION0RA_Disabled (0UL) /*!< Disable */
+#define MWU_INTEN_REGION0RA_Enabled (1UL) /*!< Enable */
+
+/* Bit 0 : Enable or disable interrupt for REGION[0].WA event */
+#define MWU_INTEN_REGION0WA_Pos (0UL) /*!< Position of REGION0WA field. */
+#define MWU_INTEN_REGION0WA_Msk (0x1UL << MWU_INTEN_REGION0WA_Pos) /*!< Bit mask of REGION0WA field. */
+#define MWU_INTEN_REGION0WA_Disabled (0UL) /*!< Disable */
+#define MWU_INTEN_REGION0WA_Enabled (1UL) /*!< Enable */
+
+/* Register: MWU_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 27 : Write '1' to Enable interrupt for PREGION[1].RA event */
+#define MWU_INTENSET_PREGION1RA_Pos (27UL) /*!< Position of PREGION1RA field. */
+#define MWU_INTENSET_PREGION1RA_Msk (0x1UL << MWU_INTENSET_PREGION1RA_Pos) /*!< Bit mask of PREGION1RA field. */
+#define MWU_INTENSET_PREGION1RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENSET_PREGION1RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENSET_PREGION1RA_Set (1UL) /*!< Enable */
+
+/* Bit 26 : Write '1' to Enable interrupt for PREGION[1].WA event */
+#define MWU_INTENSET_PREGION1WA_Pos (26UL) /*!< Position of PREGION1WA field. */
+#define MWU_INTENSET_PREGION1WA_Msk (0x1UL << MWU_INTENSET_PREGION1WA_Pos) /*!< Bit mask of PREGION1WA field. */
+#define MWU_INTENSET_PREGION1WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENSET_PREGION1WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENSET_PREGION1WA_Set (1UL) /*!< Enable */
+
+/* Bit 25 : Write '1' to Enable interrupt for PREGION[0].RA event */
+#define MWU_INTENSET_PREGION0RA_Pos (25UL) /*!< Position of PREGION0RA field. */
+#define MWU_INTENSET_PREGION0RA_Msk (0x1UL << MWU_INTENSET_PREGION0RA_Pos) /*!< Bit mask of PREGION0RA field. */
+#define MWU_INTENSET_PREGION0RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENSET_PREGION0RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENSET_PREGION0RA_Set (1UL) /*!< Enable */
+
+/* Bit 24 : Write '1' to Enable interrupt for PREGION[0].WA event */
+#define MWU_INTENSET_PREGION0WA_Pos (24UL) /*!< Position of PREGION0WA field. */
+#define MWU_INTENSET_PREGION0WA_Msk (0x1UL << MWU_INTENSET_PREGION0WA_Pos) /*!< Bit mask of PREGION0WA field. */
+#define MWU_INTENSET_PREGION0WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENSET_PREGION0WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENSET_PREGION0WA_Set (1UL) /*!< Enable */
+
+/* Bit 7 : Write '1' to Enable interrupt for REGION[3].RA event */
+#define MWU_INTENSET_REGION3RA_Pos (7UL) /*!< Position of REGION3RA field. */
+#define MWU_INTENSET_REGION3RA_Msk (0x1UL << MWU_INTENSET_REGION3RA_Pos) /*!< Bit mask of REGION3RA field. */
+#define MWU_INTENSET_REGION3RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENSET_REGION3RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENSET_REGION3RA_Set (1UL) /*!< Enable */
+
+/* Bit 6 : Write '1' to Enable interrupt for REGION[3].WA event */
+#define MWU_INTENSET_REGION3WA_Pos (6UL) /*!< Position of REGION3WA field. */
+#define MWU_INTENSET_REGION3WA_Msk (0x1UL << MWU_INTENSET_REGION3WA_Pos) /*!< Bit mask of REGION3WA field. */
+#define MWU_INTENSET_REGION3WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENSET_REGION3WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENSET_REGION3WA_Set (1UL) /*!< Enable */
+
+/* Bit 5 : Write '1' to Enable interrupt for REGION[2].RA event */
+#define MWU_INTENSET_REGION2RA_Pos (5UL) /*!< Position of REGION2RA field. */
+#define MWU_INTENSET_REGION2RA_Msk (0x1UL << MWU_INTENSET_REGION2RA_Pos) /*!< Bit mask of REGION2RA field. */
+#define MWU_INTENSET_REGION2RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENSET_REGION2RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENSET_REGION2RA_Set (1UL) /*!< Enable */
+
+/* Bit 4 : Write '1' to Enable interrupt for REGION[2].WA event */
+#define MWU_INTENSET_REGION2WA_Pos (4UL) /*!< Position of REGION2WA field. */
+#define MWU_INTENSET_REGION2WA_Msk (0x1UL << MWU_INTENSET_REGION2WA_Pos) /*!< Bit mask of REGION2WA field. */
+#define MWU_INTENSET_REGION2WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENSET_REGION2WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENSET_REGION2WA_Set (1UL) /*!< Enable */
+
+/* Bit 3 : Write '1' to Enable interrupt for REGION[1].RA event */
+#define MWU_INTENSET_REGION1RA_Pos (3UL) /*!< Position of REGION1RA field. */
+#define MWU_INTENSET_REGION1RA_Msk (0x1UL << MWU_INTENSET_REGION1RA_Pos) /*!< Bit mask of REGION1RA field. */
+#define MWU_INTENSET_REGION1RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENSET_REGION1RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENSET_REGION1RA_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for REGION[1].WA event */
+#define MWU_INTENSET_REGION1WA_Pos (2UL) /*!< Position of REGION1WA field. */
+#define MWU_INTENSET_REGION1WA_Msk (0x1UL << MWU_INTENSET_REGION1WA_Pos) /*!< Bit mask of REGION1WA field. */
+#define MWU_INTENSET_REGION1WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENSET_REGION1WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENSET_REGION1WA_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for REGION[0].RA event */
+#define MWU_INTENSET_REGION0RA_Pos (1UL) /*!< Position of REGION0RA field. */
+#define MWU_INTENSET_REGION0RA_Msk (0x1UL << MWU_INTENSET_REGION0RA_Pos) /*!< Bit mask of REGION0RA field. */
+#define MWU_INTENSET_REGION0RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENSET_REGION0RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENSET_REGION0RA_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for REGION[0].WA event */
+#define MWU_INTENSET_REGION0WA_Pos (0UL) /*!< Position of REGION0WA field. */
+#define MWU_INTENSET_REGION0WA_Msk (0x1UL << MWU_INTENSET_REGION0WA_Pos) /*!< Bit mask of REGION0WA field. */
+#define MWU_INTENSET_REGION0WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENSET_REGION0WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENSET_REGION0WA_Set (1UL) /*!< Enable */
+
+/* Register: MWU_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 27 : Write '1' to Disable interrupt for PREGION[1].RA event */
+#define MWU_INTENCLR_PREGION1RA_Pos (27UL) /*!< Position of PREGION1RA field. */
+#define MWU_INTENCLR_PREGION1RA_Msk (0x1UL << MWU_INTENCLR_PREGION1RA_Pos) /*!< Bit mask of PREGION1RA field. */
+#define MWU_INTENCLR_PREGION1RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENCLR_PREGION1RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENCLR_PREGION1RA_Clear (1UL) /*!< Disable */
+
+/* Bit 26 : Write '1' to Disable interrupt for PREGION[1].WA event */
+#define MWU_INTENCLR_PREGION1WA_Pos (26UL) /*!< Position of PREGION1WA field. */
+#define MWU_INTENCLR_PREGION1WA_Msk (0x1UL << MWU_INTENCLR_PREGION1WA_Pos) /*!< Bit mask of PREGION1WA field. */
+#define MWU_INTENCLR_PREGION1WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENCLR_PREGION1WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENCLR_PREGION1WA_Clear (1UL) /*!< Disable */
+
+/* Bit 25 : Write '1' to Disable interrupt for PREGION[0].RA event */
+#define MWU_INTENCLR_PREGION0RA_Pos (25UL) /*!< Position of PREGION0RA field. */
+#define MWU_INTENCLR_PREGION0RA_Msk (0x1UL << MWU_INTENCLR_PREGION0RA_Pos) /*!< Bit mask of PREGION0RA field. */
+#define MWU_INTENCLR_PREGION0RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENCLR_PREGION0RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENCLR_PREGION0RA_Clear (1UL) /*!< Disable */
+
+/* Bit 24 : Write '1' to Disable interrupt for PREGION[0].WA event */
+#define MWU_INTENCLR_PREGION0WA_Pos (24UL) /*!< Position of PREGION0WA field. */
+#define MWU_INTENCLR_PREGION0WA_Msk (0x1UL << MWU_INTENCLR_PREGION0WA_Pos) /*!< Bit mask of PREGION0WA field. */
+#define MWU_INTENCLR_PREGION0WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENCLR_PREGION0WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENCLR_PREGION0WA_Clear (1UL) /*!< Disable */
+
+/* Bit 7 : Write '1' to Disable interrupt for REGION[3].RA event */
+#define MWU_INTENCLR_REGION3RA_Pos (7UL) /*!< Position of REGION3RA field. */
+#define MWU_INTENCLR_REGION3RA_Msk (0x1UL << MWU_INTENCLR_REGION3RA_Pos) /*!< Bit mask of REGION3RA field. */
+#define MWU_INTENCLR_REGION3RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENCLR_REGION3RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENCLR_REGION3RA_Clear (1UL) /*!< Disable */
+
+/* Bit 6 : Write '1' to Disable interrupt for REGION[3].WA event */
+#define MWU_INTENCLR_REGION3WA_Pos (6UL) /*!< Position of REGION3WA field. */
+#define MWU_INTENCLR_REGION3WA_Msk (0x1UL << MWU_INTENCLR_REGION3WA_Pos) /*!< Bit mask of REGION3WA field. */
+#define MWU_INTENCLR_REGION3WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENCLR_REGION3WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENCLR_REGION3WA_Clear (1UL) /*!< Disable */
+
+/* Bit 5 : Write '1' to Disable interrupt for REGION[2].RA event */
+#define MWU_INTENCLR_REGION2RA_Pos (5UL) /*!< Position of REGION2RA field. */
+#define MWU_INTENCLR_REGION2RA_Msk (0x1UL << MWU_INTENCLR_REGION2RA_Pos) /*!< Bit mask of REGION2RA field. */
+#define MWU_INTENCLR_REGION2RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENCLR_REGION2RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENCLR_REGION2RA_Clear (1UL) /*!< Disable */
+
+/* Bit 4 : Write '1' to Disable interrupt for REGION[2].WA event */
+#define MWU_INTENCLR_REGION2WA_Pos (4UL) /*!< Position of REGION2WA field. */
+#define MWU_INTENCLR_REGION2WA_Msk (0x1UL << MWU_INTENCLR_REGION2WA_Pos) /*!< Bit mask of REGION2WA field. */
+#define MWU_INTENCLR_REGION2WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENCLR_REGION2WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENCLR_REGION2WA_Clear (1UL) /*!< Disable */
+
+/* Bit 3 : Write '1' to Disable interrupt for REGION[1].RA event */
+#define MWU_INTENCLR_REGION1RA_Pos (3UL) /*!< Position of REGION1RA field. */
+#define MWU_INTENCLR_REGION1RA_Msk (0x1UL << MWU_INTENCLR_REGION1RA_Pos) /*!< Bit mask of REGION1RA field. */
+#define MWU_INTENCLR_REGION1RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENCLR_REGION1RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENCLR_REGION1RA_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for REGION[1].WA event */
+#define MWU_INTENCLR_REGION1WA_Pos (2UL) /*!< Position of REGION1WA field. */
+#define MWU_INTENCLR_REGION1WA_Msk (0x1UL << MWU_INTENCLR_REGION1WA_Pos) /*!< Bit mask of REGION1WA field. */
+#define MWU_INTENCLR_REGION1WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENCLR_REGION1WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENCLR_REGION1WA_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for REGION[0].RA event */
+#define MWU_INTENCLR_REGION0RA_Pos (1UL) /*!< Position of REGION0RA field. */
+#define MWU_INTENCLR_REGION0RA_Msk (0x1UL << MWU_INTENCLR_REGION0RA_Pos) /*!< Bit mask of REGION0RA field. */
+#define MWU_INTENCLR_REGION0RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENCLR_REGION0RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENCLR_REGION0RA_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for REGION[0].WA event */
+#define MWU_INTENCLR_REGION0WA_Pos (0UL) /*!< Position of REGION0WA field. */
+#define MWU_INTENCLR_REGION0WA_Msk (0x1UL << MWU_INTENCLR_REGION0WA_Pos) /*!< Bit mask of REGION0WA field. */
+#define MWU_INTENCLR_REGION0WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_INTENCLR_REGION0WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_INTENCLR_REGION0WA_Clear (1UL) /*!< Disable */
+
+/* Register: MWU_NMIEN */
+/* Description: Enable or disable non-maskable interrupt */
+
+/* Bit 27 : Enable or disable non-maskable interrupt for PREGION[1].RA event */
+#define MWU_NMIEN_PREGION1RA_Pos (27UL) /*!< Position of PREGION1RA field. */
+#define MWU_NMIEN_PREGION1RA_Msk (0x1UL << MWU_NMIEN_PREGION1RA_Pos) /*!< Bit mask of PREGION1RA field. */
+#define MWU_NMIEN_PREGION1RA_Disabled (0UL) /*!< Disable */
+#define MWU_NMIEN_PREGION1RA_Enabled (1UL) /*!< Enable */
+
+/* Bit 26 : Enable or disable non-maskable interrupt for PREGION[1].WA event */
+#define MWU_NMIEN_PREGION1WA_Pos (26UL) /*!< Position of PREGION1WA field. */
+#define MWU_NMIEN_PREGION1WA_Msk (0x1UL << MWU_NMIEN_PREGION1WA_Pos) /*!< Bit mask of PREGION1WA field. */
+#define MWU_NMIEN_PREGION1WA_Disabled (0UL) /*!< Disable */
+#define MWU_NMIEN_PREGION1WA_Enabled (1UL) /*!< Enable */
+
+/* Bit 25 : Enable or disable non-maskable interrupt for PREGION[0].RA event */
+#define MWU_NMIEN_PREGION0RA_Pos (25UL) /*!< Position of PREGION0RA field. */
+#define MWU_NMIEN_PREGION0RA_Msk (0x1UL << MWU_NMIEN_PREGION0RA_Pos) /*!< Bit mask of PREGION0RA field. */
+#define MWU_NMIEN_PREGION0RA_Disabled (0UL) /*!< Disable */
+#define MWU_NMIEN_PREGION0RA_Enabled (1UL) /*!< Enable */
+
+/* Bit 24 : Enable or disable non-maskable interrupt for PREGION[0].WA event */
+#define MWU_NMIEN_PREGION0WA_Pos (24UL) /*!< Position of PREGION0WA field. */
+#define MWU_NMIEN_PREGION0WA_Msk (0x1UL << MWU_NMIEN_PREGION0WA_Pos) /*!< Bit mask of PREGION0WA field. */
+#define MWU_NMIEN_PREGION0WA_Disabled (0UL) /*!< Disable */
+#define MWU_NMIEN_PREGION0WA_Enabled (1UL) /*!< Enable */
+
+/* Bit 7 : Enable or disable non-maskable interrupt for REGION[3].RA event */
+#define MWU_NMIEN_REGION3RA_Pos (7UL) /*!< Position of REGION3RA field. */
+#define MWU_NMIEN_REGION3RA_Msk (0x1UL << MWU_NMIEN_REGION3RA_Pos) /*!< Bit mask of REGION3RA field. */
+#define MWU_NMIEN_REGION3RA_Disabled (0UL) /*!< Disable */
+#define MWU_NMIEN_REGION3RA_Enabled (1UL) /*!< Enable */
+
+/* Bit 6 : Enable or disable non-maskable interrupt for REGION[3].WA event */
+#define MWU_NMIEN_REGION3WA_Pos (6UL) /*!< Position of REGION3WA field. */
+#define MWU_NMIEN_REGION3WA_Msk (0x1UL << MWU_NMIEN_REGION3WA_Pos) /*!< Bit mask of REGION3WA field. */
+#define MWU_NMIEN_REGION3WA_Disabled (0UL) /*!< Disable */
+#define MWU_NMIEN_REGION3WA_Enabled (1UL) /*!< Enable */
+
+/* Bit 5 : Enable or disable non-maskable interrupt for REGION[2].RA event */
+#define MWU_NMIEN_REGION2RA_Pos (5UL) /*!< Position of REGION2RA field. */
+#define MWU_NMIEN_REGION2RA_Msk (0x1UL << MWU_NMIEN_REGION2RA_Pos) /*!< Bit mask of REGION2RA field. */
+#define MWU_NMIEN_REGION2RA_Disabled (0UL) /*!< Disable */
+#define MWU_NMIEN_REGION2RA_Enabled (1UL) /*!< Enable */
+
+/* Bit 4 : Enable or disable non-maskable interrupt for REGION[2].WA event */
+#define MWU_NMIEN_REGION2WA_Pos (4UL) /*!< Position of REGION2WA field. */
+#define MWU_NMIEN_REGION2WA_Msk (0x1UL << MWU_NMIEN_REGION2WA_Pos) /*!< Bit mask of REGION2WA field. */
+#define MWU_NMIEN_REGION2WA_Disabled (0UL) /*!< Disable */
+#define MWU_NMIEN_REGION2WA_Enabled (1UL) /*!< Enable */
+
+/* Bit 3 : Enable or disable non-maskable interrupt for REGION[1].RA event */
+#define MWU_NMIEN_REGION1RA_Pos (3UL) /*!< Position of REGION1RA field. */
+#define MWU_NMIEN_REGION1RA_Msk (0x1UL << MWU_NMIEN_REGION1RA_Pos) /*!< Bit mask of REGION1RA field. */
+#define MWU_NMIEN_REGION1RA_Disabled (0UL) /*!< Disable */
+#define MWU_NMIEN_REGION1RA_Enabled (1UL) /*!< Enable */
+
+/* Bit 2 : Enable or disable non-maskable interrupt for REGION[1].WA event */
+#define MWU_NMIEN_REGION1WA_Pos (2UL) /*!< Position of REGION1WA field. */
+#define MWU_NMIEN_REGION1WA_Msk (0x1UL << MWU_NMIEN_REGION1WA_Pos) /*!< Bit mask of REGION1WA field. */
+#define MWU_NMIEN_REGION1WA_Disabled (0UL) /*!< Disable */
+#define MWU_NMIEN_REGION1WA_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable non-maskable interrupt for REGION[0].RA event */
+#define MWU_NMIEN_REGION0RA_Pos (1UL) /*!< Position of REGION0RA field. */
+#define MWU_NMIEN_REGION0RA_Msk (0x1UL << MWU_NMIEN_REGION0RA_Pos) /*!< Bit mask of REGION0RA field. */
+#define MWU_NMIEN_REGION0RA_Disabled (0UL) /*!< Disable */
+#define MWU_NMIEN_REGION0RA_Enabled (1UL) /*!< Enable */
+
+/* Bit 0 : Enable or disable non-maskable interrupt for REGION[0].WA event */
+#define MWU_NMIEN_REGION0WA_Pos (0UL) /*!< Position of REGION0WA field. */
+#define MWU_NMIEN_REGION0WA_Msk (0x1UL << MWU_NMIEN_REGION0WA_Pos) /*!< Bit mask of REGION0WA field. */
+#define MWU_NMIEN_REGION0WA_Disabled (0UL) /*!< Disable */
+#define MWU_NMIEN_REGION0WA_Enabled (1UL) /*!< Enable */
+
+/* Register: MWU_NMIENSET */
+/* Description: Enable non-maskable interrupt */
+
+/* Bit 27 : Write '1' to Enable non-maskable interrupt for PREGION[1].RA event */
+#define MWU_NMIENSET_PREGION1RA_Pos (27UL) /*!< Position of PREGION1RA field. */
+#define MWU_NMIENSET_PREGION1RA_Msk (0x1UL << MWU_NMIENSET_PREGION1RA_Pos) /*!< Bit mask of PREGION1RA field. */
+#define MWU_NMIENSET_PREGION1RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENSET_PREGION1RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENSET_PREGION1RA_Set (1UL) /*!< Enable */
+
+/* Bit 26 : Write '1' to Enable non-maskable interrupt for PREGION[1].WA event */
+#define MWU_NMIENSET_PREGION1WA_Pos (26UL) /*!< Position of PREGION1WA field. */
+#define MWU_NMIENSET_PREGION1WA_Msk (0x1UL << MWU_NMIENSET_PREGION1WA_Pos) /*!< Bit mask of PREGION1WA field. */
+#define MWU_NMIENSET_PREGION1WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENSET_PREGION1WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENSET_PREGION1WA_Set (1UL) /*!< Enable */
+
+/* Bit 25 : Write '1' to Enable non-maskable interrupt for PREGION[0].RA event */
+#define MWU_NMIENSET_PREGION0RA_Pos (25UL) /*!< Position of PREGION0RA field. */
+#define MWU_NMIENSET_PREGION0RA_Msk (0x1UL << MWU_NMIENSET_PREGION0RA_Pos) /*!< Bit mask of PREGION0RA field. */
+#define MWU_NMIENSET_PREGION0RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENSET_PREGION0RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENSET_PREGION0RA_Set (1UL) /*!< Enable */
+
+/* Bit 24 : Write '1' to Enable non-maskable interrupt for PREGION[0].WA event */
+#define MWU_NMIENSET_PREGION0WA_Pos (24UL) /*!< Position of PREGION0WA field. */
+#define MWU_NMIENSET_PREGION0WA_Msk (0x1UL << MWU_NMIENSET_PREGION0WA_Pos) /*!< Bit mask of PREGION0WA field. */
+#define MWU_NMIENSET_PREGION0WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENSET_PREGION0WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENSET_PREGION0WA_Set (1UL) /*!< Enable */
+
+/* Bit 7 : Write '1' to Enable non-maskable interrupt for REGION[3].RA event */
+#define MWU_NMIENSET_REGION3RA_Pos (7UL) /*!< Position of REGION3RA field. */
+#define MWU_NMIENSET_REGION3RA_Msk (0x1UL << MWU_NMIENSET_REGION3RA_Pos) /*!< Bit mask of REGION3RA field. */
+#define MWU_NMIENSET_REGION3RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENSET_REGION3RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENSET_REGION3RA_Set (1UL) /*!< Enable */
+
+/* Bit 6 : Write '1' to Enable non-maskable interrupt for REGION[3].WA event */
+#define MWU_NMIENSET_REGION3WA_Pos (6UL) /*!< Position of REGION3WA field. */
+#define MWU_NMIENSET_REGION3WA_Msk (0x1UL << MWU_NMIENSET_REGION3WA_Pos) /*!< Bit mask of REGION3WA field. */
+#define MWU_NMIENSET_REGION3WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENSET_REGION3WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENSET_REGION3WA_Set (1UL) /*!< Enable */
+
+/* Bit 5 : Write '1' to Enable non-maskable interrupt for REGION[2].RA event */
+#define MWU_NMIENSET_REGION2RA_Pos (5UL) /*!< Position of REGION2RA field. */
+#define MWU_NMIENSET_REGION2RA_Msk (0x1UL << MWU_NMIENSET_REGION2RA_Pos) /*!< Bit mask of REGION2RA field. */
+#define MWU_NMIENSET_REGION2RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENSET_REGION2RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENSET_REGION2RA_Set (1UL) /*!< Enable */
+
+/* Bit 4 : Write '1' to Enable non-maskable interrupt for REGION[2].WA event */
+#define MWU_NMIENSET_REGION2WA_Pos (4UL) /*!< Position of REGION2WA field. */
+#define MWU_NMIENSET_REGION2WA_Msk (0x1UL << MWU_NMIENSET_REGION2WA_Pos) /*!< Bit mask of REGION2WA field. */
+#define MWU_NMIENSET_REGION2WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENSET_REGION2WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENSET_REGION2WA_Set (1UL) /*!< Enable */
+
+/* Bit 3 : Write '1' to Enable non-maskable interrupt for REGION[1].RA event */
+#define MWU_NMIENSET_REGION1RA_Pos (3UL) /*!< Position of REGION1RA field. */
+#define MWU_NMIENSET_REGION1RA_Msk (0x1UL << MWU_NMIENSET_REGION1RA_Pos) /*!< Bit mask of REGION1RA field. */
+#define MWU_NMIENSET_REGION1RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENSET_REGION1RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENSET_REGION1RA_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable non-maskable interrupt for REGION[1].WA event */
+#define MWU_NMIENSET_REGION1WA_Pos (2UL) /*!< Position of REGION1WA field. */
+#define MWU_NMIENSET_REGION1WA_Msk (0x1UL << MWU_NMIENSET_REGION1WA_Pos) /*!< Bit mask of REGION1WA field. */
+#define MWU_NMIENSET_REGION1WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENSET_REGION1WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENSET_REGION1WA_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable non-maskable interrupt for REGION[0].RA event */
+#define MWU_NMIENSET_REGION0RA_Pos (1UL) /*!< Position of REGION0RA field. */
+#define MWU_NMIENSET_REGION0RA_Msk (0x1UL << MWU_NMIENSET_REGION0RA_Pos) /*!< Bit mask of REGION0RA field. */
+#define MWU_NMIENSET_REGION0RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENSET_REGION0RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENSET_REGION0RA_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable non-maskable interrupt for REGION[0].WA event */
+#define MWU_NMIENSET_REGION0WA_Pos (0UL) /*!< Position of REGION0WA field. */
+#define MWU_NMIENSET_REGION0WA_Msk (0x1UL << MWU_NMIENSET_REGION0WA_Pos) /*!< Bit mask of REGION0WA field. */
+#define MWU_NMIENSET_REGION0WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENSET_REGION0WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENSET_REGION0WA_Set (1UL) /*!< Enable */
+
+/* Register: MWU_NMIENCLR */
+/* Description: Disable non-maskable interrupt */
+
+/* Bit 27 : Write '1' to Disable non-maskable interrupt for PREGION[1].RA event */
+#define MWU_NMIENCLR_PREGION1RA_Pos (27UL) /*!< Position of PREGION1RA field. */
+#define MWU_NMIENCLR_PREGION1RA_Msk (0x1UL << MWU_NMIENCLR_PREGION1RA_Pos) /*!< Bit mask of PREGION1RA field. */
+#define MWU_NMIENCLR_PREGION1RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENCLR_PREGION1RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENCLR_PREGION1RA_Clear (1UL) /*!< Disable */
+
+/* Bit 26 : Write '1' to Disable non-maskable interrupt for PREGION[1].WA event */
+#define MWU_NMIENCLR_PREGION1WA_Pos (26UL) /*!< Position of PREGION1WA field. */
+#define MWU_NMIENCLR_PREGION1WA_Msk (0x1UL << MWU_NMIENCLR_PREGION1WA_Pos) /*!< Bit mask of PREGION1WA field. */
+#define MWU_NMIENCLR_PREGION1WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENCLR_PREGION1WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENCLR_PREGION1WA_Clear (1UL) /*!< Disable */
+
+/* Bit 25 : Write '1' to Disable non-maskable interrupt for PREGION[0].RA event */
+#define MWU_NMIENCLR_PREGION0RA_Pos (25UL) /*!< Position of PREGION0RA field. */
+#define MWU_NMIENCLR_PREGION0RA_Msk (0x1UL << MWU_NMIENCLR_PREGION0RA_Pos) /*!< Bit mask of PREGION0RA field. */
+#define MWU_NMIENCLR_PREGION0RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENCLR_PREGION0RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENCLR_PREGION0RA_Clear (1UL) /*!< Disable */
+
+/* Bit 24 : Write '1' to Disable non-maskable interrupt for PREGION[0].WA event */
+#define MWU_NMIENCLR_PREGION0WA_Pos (24UL) /*!< Position of PREGION0WA field. */
+#define MWU_NMIENCLR_PREGION0WA_Msk (0x1UL << MWU_NMIENCLR_PREGION0WA_Pos) /*!< Bit mask of PREGION0WA field. */
+#define MWU_NMIENCLR_PREGION0WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENCLR_PREGION0WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENCLR_PREGION0WA_Clear (1UL) /*!< Disable */
+
+/* Bit 7 : Write '1' to Disable non-maskable interrupt for REGION[3].RA event */
+#define MWU_NMIENCLR_REGION3RA_Pos (7UL) /*!< Position of REGION3RA field. */
+#define MWU_NMIENCLR_REGION3RA_Msk (0x1UL << MWU_NMIENCLR_REGION3RA_Pos) /*!< Bit mask of REGION3RA field. */
+#define MWU_NMIENCLR_REGION3RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENCLR_REGION3RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENCLR_REGION3RA_Clear (1UL) /*!< Disable */
+
+/* Bit 6 : Write '1' to Disable non-maskable interrupt for REGION[3].WA event */
+#define MWU_NMIENCLR_REGION3WA_Pos (6UL) /*!< Position of REGION3WA field. */
+#define MWU_NMIENCLR_REGION3WA_Msk (0x1UL << MWU_NMIENCLR_REGION3WA_Pos) /*!< Bit mask of REGION3WA field. */
+#define MWU_NMIENCLR_REGION3WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENCLR_REGION3WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENCLR_REGION3WA_Clear (1UL) /*!< Disable */
+
+/* Bit 5 : Write '1' to Disable non-maskable interrupt for REGION[2].RA event */
+#define MWU_NMIENCLR_REGION2RA_Pos (5UL) /*!< Position of REGION2RA field. */
+#define MWU_NMIENCLR_REGION2RA_Msk (0x1UL << MWU_NMIENCLR_REGION2RA_Pos) /*!< Bit mask of REGION2RA field. */
+#define MWU_NMIENCLR_REGION2RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENCLR_REGION2RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENCLR_REGION2RA_Clear (1UL) /*!< Disable */
+
+/* Bit 4 : Write '1' to Disable non-maskable interrupt for REGION[2].WA event */
+#define MWU_NMIENCLR_REGION2WA_Pos (4UL) /*!< Position of REGION2WA field. */
+#define MWU_NMIENCLR_REGION2WA_Msk (0x1UL << MWU_NMIENCLR_REGION2WA_Pos) /*!< Bit mask of REGION2WA field. */
+#define MWU_NMIENCLR_REGION2WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENCLR_REGION2WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENCLR_REGION2WA_Clear (1UL) /*!< Disable */
+
+/* Bit 3 : Write '1' to Disable non-maskable interrupt for REGION[1].RA event */
+#define MWU_NMIENCLR_REGION1RA_Pos (3UL) /*!< Position of REGION1RA field. */
+#define MWU_NMIENCLR_REGION1RA_Msk (0x1UL << MWU_NMIENCLR_REGION1RA_Pos) /*!< Bit mask of REGION1RA field. */
+#define MWU_NMIENCLR_REGION1RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENCLR_REGION1RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENCLR_REGION1RA_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable non-maskable interrupt for REGION[1].WA event */
+#define MWU_NMIENCLR_REGION1WA_Pos (2UL) /*!< Position of REGION1WA field. */
+#define MWU_NMIENCLR_REGION1WA_Msk (0x1UL << MWU_NMIENCLR_REGION1WA_Pos) /*!< Bit mask of REGION1WA field. */
+#define MWU_NMIENCLR_REGION1WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENCLR_REGION1WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENCLR_REGION1WA_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable non-maskable interrupt for REGION[0].RA event */
+#define MWU_NMIENCLR_REGION0RA_Pos (1UL) /*!< Position of REGION0RA field. */
+#define MWU_NMIENCLR_REGION0RA_Msk (0x1UL << MWU_NMIENCLR_REGION0RA_Pos) /*!< Bit mask of REGION0RA field. */
+#define MWU_NMIENCLR_REGION0RA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENCLR_REGION0RA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENCLR_REGION0RA_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable non-maskable interrupt for REGION[0].WA event */
+#define MWU_NMIENCLR_REGION0WA_Pos (0UL) /*!< Position of REGION0WA field. */
+#define MWU_NMIENCLR_REGION0WA_Msk (0x1UL << MWU_NMIENCLR_REGION0WA_Pos) /*!< Bit mask of REGION0WA field. */
+#define MWU_NMIENCLR_REGION0WA_Disabled (0UL) /*!< Read: Disabled */
+#define MWU_NMIENCLR_REGION0WA_Enabled (1UL) /*!< Read: Enabled */
+#define MWU_NMIENCLR_REGION0WA_Clear (1UL) /*!< Disable */
+
+/* Register: MWU_PERREGION_SUBSTATWA */
+/* Description: Description cluster[0]: Source of event/interrupt in region 0, write access detected while corresponding subregion was enabled for watching */
+
+/* Bit 31 : Subregion 31 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR31_Pos (31UL) /*!< Position of SR31 field. */
+#define MWU_PERREGION_SUBSTATWA_SR31_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR31_Pos) /*!< Bit mask of SR31 field. */
+#define MWU_PERREGION_SUBSTATWA_SR31_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR31_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 30 : Subregion 30 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR30_Pos (30UL) /*!< Position of SR30 field. */
+#define MWU_PERREGION_SUBSTATWA_SR30_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR30_Pos) /*!< Bit mask of SR30 field. */
+#define MWU_PERREGION_SUBSTATWA_SR30_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR30_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 29 : Subregion 29 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR29_Pos (29UL) /*!< Position of SR29 field. */
+#define MWU_PERREGION_SUBSTATWA_SR29_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR29_Pos) /*!< Bit mask of SR29 field. */
+#define MWU_PERREGION_SUBSTATWA_SR29_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR29_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 28 : Subregion 28 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR28_Pos (28UL) /*!< Position of SR28 field. */
+#define MWU_PERREGION_SUBSTATWA_SR28_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR28_Pos) /*!< Bit mask of SR28 field. */
+#define MWU_PERREGION_SUBSTATWA_SR28_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR28_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 27 : Subregion 27 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR27_Pos (27UL) /*!< Position of SR27 field. */
+#define MWU_PERREGION_SUBSTATWA_SR27_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR27_Pos) /*!< Bit mask of SR27 field. */
+#define MWU_PERREGION_SUBSTATWA_SR27_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR27_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 26 : Subregion 26 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR26_Pos (26UL) /*!< Position of SR26 field. */
+#define MWU_PERREGION_SUBSTATWA_SR26_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR26_Pos) /*!< Bit mask of SR26 field. */
+#define MWU_PERREGION_SUBSTATWA_SR26_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR26_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 25 : Subregion 25 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR25_Pos (25UL) /*!< Position of SR25 field. */
+#define MWU_PERREGION_SUBSTATWA_SR25_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR25_Pos) /*!< Bit mask of SR25 field. */
+#define MWU_PERREGION_SUBSTATWA_SR25_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR25_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 24 : Subregion 24 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR24_Pos (24UL) /*!< Position of SR24 field. */
+#define MWU_PERREGION_SUBSTATWA_SR24_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR24_Pos) /*!< Bit mask of SR24 field. */
+#define MWU_PERREGION_SUBSTATWA_SR24_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR24_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 23 : Subregion 23 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR23_Pos (23UL) /*!< Position of SR23 field. */
+#define MWU_PERREGION_SUBSTATWA_SR23_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR23_Pos) /*!< Bit mask of SR23 field. */
+#define MWU_PERREGION_SUBSTATWA_SR23_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR23_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 22 : Subregion 22 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR22_Pos (22UL) /*!< Position of SR22 field. */
+#define MWU_PERREGION_SUBSTATWA_SR22_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR22_Pos) /*!< Bit mask of SR22 field. */
+#define MWU_PERREGION_SUBSTATWA_SR22_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR22_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 21 : Subregion 21 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR21_Pos (21UL) /*!< Position of SR21 field. */
+#define MWU_PERREGION_SUBSTATWA_SR21_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR21_Pos) /*!< Bit mask of SR21 field. */
+#define MWU_PERREGION_SUBSTATWA_SR21_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR21_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 20 : Subregion 20 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR20_Pos (20UL) /*!< Position of SR20 field. */
+#define MWU_PERREGION_SUBSTATWA_SR20_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR20_Pos) /*!< Bit mask of SR20 field. */
+#define MWU_PERREGION_SUBSTATWA_SR20_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR20_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 19 : Subregion 19 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR19_Pos (19UL) /*!< Position of SR19 field. */
+#define MWU_PERREGION_SUBSTATWA_SR19_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR19_Pos) /*!< Bit mask of SR19 field. */
+#define MWU_PERREGION_SUBSTATWA_SR19_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR19_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 18 : Subregion 18 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR18_Pos (18UL) /*!< Position of SR18 field. */
+#define MWU_PERREGION_SUBSTATWA_SR18_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR18_Pos) /*!< Bit mask of SR18 field. */
+#define MWU_PERREGION_SUBSTATWA_SR18_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR18_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 17 : Subregion 17 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR17_Pos (17UL) /*!< Position of SR17 field. */
+#define MWU_PERREGION_SUBSTATWA_SR17_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR17_Pos) /*!< Bit mask of SR17 field. */
+#define MWU_PERREGION_SUBSTATWA_SR17_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR17_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 16 : Subregion 16 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR16_Pos (16UL) /*!< Position of SR16 field. */
+#define MWU_PERREGION_SUBSTATWA_SR16_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR16_Pos) /*!< Bit mask of SR16 field. */
+#define MWU_PERREGION_SUBSTATWA_SR16_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR16_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 15 : Subregion 15 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR15_Pos (15UL) /*!< Position of SR15 field. */
+#define MWU_PERREGION_SUBSTATWA_SR15_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR15_Pos) /*!< Bit mask of SR15 field. */
+#define MWU_PERREGION_SUBSTATWA_SR15_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR15_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 14 : Subregion 14 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR14_Pos (14UL) /*!< Position of SR14 field. */
+#define MWU_PERREGION_SUBSTATWA_SR14_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR14_Pos) /*!< Bit mask of SR14 field. */
+#define MWU_PERREGION_SUBSTATWA_SR14_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR14_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 13 : Subregion 13 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR13_Pos (13UL) /*!< Position of SR13 field. */
+#define MWU_PERREGION_SUBSTATWA_SR13_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR13_Pos) /*!< Bit mask of SR13 field. */
+#define MWU_PERREGION_SUBSTATWA_SR13_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR13_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 12 : Subregion 12 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR12_Pos (12UL) /*!< Position of SR12 field. */
+#define MWU_PERREGION_SUBSTATWA_SR12_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR12_Pos) /*!< Bit mask of SR12 field. */
+#define MWU_PERREGION_SUBSTATWA_SR12_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR12_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 11 : Subregion 11 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR11_Pos (11UL) /*!< Position of SR11 field. */
+#define MWU_PERREGION_SUBSTATWA_SR11_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR11_Pos) /*!< Bit mask of SR11 field. */
+#define MWU_PERREGION_SUBSTATWA_SR11_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR11_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 10 : Subregion 10 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR10_Pos (10UL) /*!< Position of SR10 field. */
+#define MWU_PERREGION_SUBSTATWA_SR10_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR10_Pos) /*!< Bit mask of SR10 field. */
+#define MWU_PERREGION_SUBSTATWA_SR10_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR10_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 9 : Subregion 9 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR9_Pos (9UL) /*!< Position of SR9 field. */
+#define MWU_PERREGION_SUBSTATWA_SR9_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR9_Pos) /*!< Bit mask of SR9 field. */
+#define MWU_PERREGION_SUBSTATWA_SR9_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR9_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 8 : Subregion 8 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR8_Pos (8UL) /*!< Position of SR8 field. */
+#define MWU_PERREGION_SUBSTATWA_SR8_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR8_Pos) /*!< Bit mask of SR8 field. */
+#define MWU_PERREGION_SUBSTATWA_SR8_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR8_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 7 : Subregion 7 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR7_Pos (7UL) /*!< Position of SR7 field. */
+#define MWU_PERREGION_SUBSTATWA_SR7_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR7_Pos) /*!< Bit mask of SR7 field. */
+#define MWU_PERREGION_SUBSTATWA_SR7_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR7_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 6 : Subregion 6 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR6_Pos (6UL) /*!< Position of SR6 field. */
+#define MWU_PERREGION_SUBSTATWA_SR6_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR6_Pos) /*!< Bit mask of SR6 field. */
+#define MWU_PERREGION_SUBSTATWA_SR6_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR6_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 5 : Subregion 5 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR5_Pos (5UL) /*!< Position of SR5 field. */
+#define MWU_PERREGION_SUBSTATWA_SR5_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR5_Pos) /*!< Bit mask of SR5 field. */
+#define MWU_PERREGION_SUBSTATWA_SR5_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR5_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 4 : Subregion 4 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR4_Pos (4UL) /*!< Position of SR4 field. */
+#define MWU_PERREGION_SUBSTATWA_SR4_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR4_Pos) /*!< Bit mask of SR4 field. */
+#define MWU_PERREGION_SUBSTATWA_SR4_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR4_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 3 : Subregion 3 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR3_Pos (3UL) /*!< Position of SR3 field. */
+#define MWU_PERREGION_SUBSTATWA_SR3_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR3_Pos) /*!< Bit mask of SR3 field. */
+#define MWU_PERREGION_SUBSTATWA_SR3_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR3_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 2 : Subregion 2 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR2_Pos (2UL) /*!< Position of SR2 field. */
+#define MWU_PERREGION_SUBSTATWA_SR2_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR2_Pos) /*!< Bit mask of SR2 field. */
+#define MWU_PERREGION_SUBSTATWA_SR2_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR2_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 1 : Subregion 1 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR1_Pos (1UL) /*!< Position of SR1 field. */
+#define MWU_PERREGION_SUBSTATWA_SR1_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR1_Pos) /*!< Bit mask of SR1 field. */
+#define MWU_PERREGION_SUBSTATWA_SR1_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR1_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Bit 0 : Subregion 0 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATWA_SR0_Pos (0UL) /*!< Position of SR0 field. */
+#define MWU_PERREGION_SUBSTATWA_SR0_Msk (0x1UL << MWU_PERREGION_SUBSTATWA_SR0_Pos) /*!< Bit mask of SR0 field. */
+#define MWU_PERREGION_SUBSTATWA_SR0_NoAccess (0UL) /*!< No write access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATWA_SR0_Access (1UL) /*!< Write access(es) occurred in this subregion */
+
+/* Register: MWU_PERREGION_SUBSTATRA */
+/* Description: Description cluster[0]: Source of event/interrupt in region 0, read access detected while corresponding subregion was enabled for watching */
+
+/* Bit 31 : Subregion 31 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR31_Pos (31UL) /*!< Position of SR31 field. */
+#define MWU_PERREGION_SUBSTATRA_SR31_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR31_Pos) /*!< Bit mask of SR31 field. */
+#define MWU_PERREGION_SUBSTATRA_SR31_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR31_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 30 : Subregion 30 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR30_Pos (30UL) /*!< Position of SR30 field. */
+#define MWU_PERREGION_SUBSTATRA_SR30_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR30_Pos) /*!< Bit mask of SR30 field. */
+#define MWU_PERREGION_SUBSTATRA_SR30_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR30_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 29 : Subregion 29 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR29_Pos (29UL) /*!< Position of SR29 field. */
+#define MWU_PERREGION_SUBSTATRA_SR29_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR29_Pos) /*!< Bit mask of SR29 field. */
+#define MWU_PERREGION_SUBSTATRA_SR29_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR29_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 28 : Subregion 28 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR28_Pos (28UL) /*!< Position of SR28 field. */
+#define MWU_PERREGION_SUBSTATRA_SR28_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR28_Pos) /*!< Bit mask of SR28 field. */
+#define MWU_PERREGION_SUBSTATRA_SR28_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR28_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 27 : Subregion 27 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR27_Pos (27UL) /*!< Position of SR27 field. */
+#define MWU_PERREGION_SUBSTATRA_SR27_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR27_Pos) /*!< Bit mask of SR27 field. */
+#define MWU_PERREGION_SUBSTATRA_SR27_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR27_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 26 : Subregion 26 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR26_Pos (26UL) /*!< Position of SR26 field. */
+#define MWU_PERREGION_SUBSTATRA_SR26_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR26_Pos) /*!< Bit mask of SR26 field. */
+#define MWU_PERREGION_SUBSTATRA_SR26_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR26_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 25 : Subregion 25 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR25_Pos (25UL) /*!< Position of SR25 field. */
+#define MWU_PERREGION_SUBSTATRA_SR25_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR25_Pos) /*!< Bit mask of SR25 field. */
+#define MWU_PERREGION_SUBSTATRA_SR25_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR25_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 24 : Subregion 24 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR24_Pos (24UL) /*!< Position of SR24 field. */
+#define MWU_PERREGION_SUBSTATRA_SR24_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR24_Pos) /*!< Bit mask of SR24 field. */
+#define MWU_PERREGION_SUBSTATRA_SR24_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR24_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 23 : Subregion 23 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR23_Pos (23UL) /*!< Position of SR23 field. */
+#define MWU_PERREGION_SUBSTATRA_SR23_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR23_Pos) /*!< Bit mask of SR23 field. */
+#define MWU_PERREGION_SUBSTATRA_SR23_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR23_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 22 : Subregion 22 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR22_Pos (22UL) /*!< Position of SR22 field. */
+#define MWU_PERREGION_SUBSTATRA_SR22_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR22_Pos) /*!< Bit mask of SR22 field. */
+#define MWU_PERREGION_SUBSTATRA_SR22_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR22_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 21 : Subregion 21 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR21_Pos (21UL) /*!< Position of SR21 field. */
+#define MWU_PERREGION_SUBSTATRA_SR21_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR21_Pos) /*!< Bit mask of SR21 field. */
+#define MWU_PERREGION_SUBSTATRA_SR21_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR21_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 20 : Subregion 20 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR20_Pos (20UL) /*!< Position of SR20 field. */
+#define MWU_PERREGION_SUBSTATRA_SR20_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR20_Pos) /*!< Bit mask of SR20 field. */
+#define MWU_PERREGION_SUBSTATRA_SR20_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR20_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 19 : Subregion 19 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR19_Pos (19UL) /*!< Position of SR19 field. */
+#define MWU_PERREGION_SUBSTATRA_SR19_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR19_Pos) /*!< Bit mask of SR19 field. */
+#define MWU_PERREGION_SUBSTATRA_SR19_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR19_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 18 : Subregion 18 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR18_Pos (18UL) /*!< Position of SR18 field. */
+#define MWU_PERREGION_SUBSTATRA_SR18_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR18_Pos) /*!< Bit mask of SR18 field. */
+#define MWU_PERREGION_SUBSTATRA_SR18_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR18_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 17 : Subregion 17 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR17_Pos (17UL) /*!< Position of SR17 field. */
+#define MWU_PERREGION_SUBSTATRA_SR17_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR17_Pos) /*!< Bit mask of SR17 field. */
+#define MWU_PERREGION_SUBSTATRA_SR17_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR17_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 16 : Subregion 16 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR16_Pos (16UL) /*!< Position of SR16 field. */
+#define MWU_PERREGION_SUBSTATRA_SR16_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR16_Pos) /*!< Bit mask of SR16 field. */
+#define MWU_PERREGION_SUBSTATRA_SR16_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR16_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 15 : Subregion 15 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR15_Pos (15UL) /*!< Position of SR15 field. */
+#define MWU_PERREGION_SUBSTATRA_SR15_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR15_Pos) /*!< Bit mask of SR15 field. */
+#define MWU_PERREGION_SUBSTATRA_SR15_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR15_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 14 : Subregion 14 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR14_Pos (14UL) /*!< Position of SR14 field. */
+#define MWU_PERREGION_SUBSTATRA_SR14_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR14_Pos) /*!< Bit mask of SR14 field. */
+#define MWU_PERREGION_SUBSTATRA_SR14_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR14_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 13 : Subregion 13 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR13_Pos (13UL) /*!< Position of SR13 field. */
+#define MWU_PERREGION_SUBSTATRA_SR13_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR13_Pos) /*!< Bit mask of SR13 field. */
+#define MWU_PERREGION_SUBSTATRA_SR13_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR13_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 12 : Subregion 12 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR12_Pos (12UL) /*!< Position of SR12 field. */
+#define MWU_PERREGION_SUBSTATRA_SR12_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR12_Pos) /*!< Bit mask of SR12 field. */
+#define MWU_PERREGION_SUBSTATRA_SR12_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR12_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 11 : Subregion 11 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR11_Pos (11UL) /*!< Position of SR11 field. */
+#define MWU_PERREGION_SUBSTATRA_SR11_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR11_Pos) /*!< Bit mask of SR11 field. */
+#define MWU_PERREGION_SUBSTATRA_SR11_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR11_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 10 : Subregion 10 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR10_Pos (10UL) /*!< Position of SR10 field. */
+#define MWU_PERREGION_SUBSTATRA_SR10_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR10_Pos) /*!< Bit mask of SR10 field. */
+#define MWU_PERREGION_SUBSTATRA_SR10_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR10_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 9 : Subregion 9 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR9_Pos (9UL) /*!< Position of SR9 field. */
+#define MWU_PERREGION_SUBSTATRA_SR9_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR9_Pos) /*!< Bit mask of SR9 field. */
+#define MWU_PERREGION_SUBSTATRA_SR9_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR9_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 8 : Subregion 8 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR8_Pos (8UL) /*!< Position of SR8 field. */
+#define MWU_PERREGION_SUBSTATRA_SR8_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR8_Pos) /*!< Bit mask of SR8 field. */
+#define MWU_PERREGION_SUBSTATRA_SR8_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR8_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 7 : Subregion 7 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR7_Pos (7UL) /*!< Position of SR7 field. */
+#define MWU_PERREGION_SUBSTATRA_SR7_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR7_Pos) /*!< Bit mask of SR7 field. */
+#define MWU_PERREGION_SUBSTATRA_SR7_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR7_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 6 : Subregion 6 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR6_Pos (6UL) /*!< Position of SR6 field. */
+#define MWU_PERREGION_SUBSTATRA_SR6_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR6_Pos) /*!< Bit mask of SR6 field. */
+#define MWU_PERREGION_SUBSTATRA_SR6_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR6_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 5 : Subregion 5 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR5_Pos (5UL) /*!< Position of SR5 field. */
+#define MWU_PERREGION_SUBSTATRA_SR5_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR5_Pos) /*!< Bit mask of SR5 field. */
+#define MWU_PERREGION_SUBSTATRA_SR5_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR5_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 4 : Subregion 4 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR4_Pos (4UL) /*!< Position of SR4 field. */
+#define MWU_PERREGION_SUBSTATRA_SR4_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR4_Pos) /*!< Bit mask of SR4 field. */
+#define MWU_PERREGION_SUBSTATRA_SR4_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR4_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 3 : Subregion 3 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR3_Pos (3UL) /*!< Position of SR3 field. */
+#define MWU_PERREGION_SUBSTATRA_SR3_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR3_Pos) /*!< Bit mask of SR3 field. */
+#define MWU_PERREGION_SUBSTATRA_SR3_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR3_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 2 : Subregion 2 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR2_Pos (2UL) /*!< Position of SR2 field. */
+#define MWU_PERREGION_SUBSTATRA_SR2_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR2_Pos) /*!< Bit mask of SR2 field. */
+#define MWU_PERREGION_SUBSTATRA_SR2_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR2_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 1 : Subregion 1 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR1_Pos (1UL) /*!< Position of SR1 field. */
+#define MWU_PERREGION_SUBSTATRA_SR1_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR1_Pos) /*!< Bit mask of SR1 field. */
+#define MWU_PERREGION_SUBSTATRA_SR1_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR1_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Bit 0 : Subregion 0 in region 0 (write '1' to clear) */
+#define MWU_PERREGION_SUBSTATRA_SR0_Pos (0UL) /*!< Position of SR0 field. */
+#define MWU_PERREGION_SUBSTATRA_SR0_Msk (0x1UL << MWU_PERREGION_SUBSTATRA_SR0_Pos) /*!< Bit mask of SR0 field. */
+#define MWU_PERREGION_SUBSTATRA_SR0_NoAccess (0UL) /*!< No read access occurred in this subregion */
+#define MWU_PERREGION_SUBSTATRA_SR0_Access (1UL) /*!< Read access(es) occurred in this subregion */
+
+/* Register: MWU_REGIONEN */
+/* Description: Enable/disable regions watch */
+
+/* Bit 27 : Enable/disable read access watch in PREGION[1] */
+#define MWU_REGIONEN_PRGN1RA_Pos (27UL) /*!< Position of PRGN1RA field. */
+#define MWU_REGIONEN_PRGN1RA_Msk (0x1UL << MWU_REGIONEN_PRGN1RA_Pos) /*!< Bit mask of PRGN1RA field. */
+#define MWU_REGIONEN_PRGN1RA_Disable (0UL) /*!< Disable read access watch in this PREGION */
+#define MWU_REGIONEN_PRGN1RA_Enable (1UL) /*!< Enable read access watch in this PREGION */
+
+/* Bit 26 : Enable/disable write access watch in PREGION[1] */
+#define MWU_REGIONEN_PRGN1WA_Pos (26UL) /*!< Position of PRGN1WA field. */
+#define MWU_REGIONEN_PRGN1WA_Msk (0x1UL << MWU_REGIONEN_PRGN1WA_Pos) /*!< Bit mask of PRGN1WA field. */
+#define MWU_REGIONEN_PRGN1WA_Disable (0UL) /*!< Disable write access watch in this PREGION */
+#define MWU_REGIONEN_PRGN1WA_Enable (1UL) /*!< Enable write access watch in this PREGION */
+
+/* Bit 25 : Enable/disable read access watch in PREGION[0] */
+#define MWU_REGIONEN_PRGN0RA_Pos (25UL) /*!< Position of PRGN0RA field. */
+#define MWU_REGIONEN_PRGN0RA_Msk (0x1UL << MWU_REGIONEN_PRGN0RA_Pos) /*!< Bit mask of PRGN0RA field. */
+#define MWU_REGIONEN_PRGN0RA_Disable (0UL) /*!< Disable read access watch in this PREGION */
+#define MWU_REGIONEN_PRGN0RA_Enable (1UL) /*!< Enable read access watch in this PREGION */
+
+/* Bit 24 : Enable/disable write access watch in PREGION[0] */
+#define MWU_REGIONEN_PRGN0WA_Pos (24UL) /*!< Position of PRGN0WA field. */
+#define MWU_REGIONEN_PRGN0WA_Msk (0x1UL << MWU_REGIONEN_PRGN0WA_Pos) /*!< Bit mask of PRGN0WA field. */
+#define MWU_REGIONEN_PRGN0WA_Disable (0UL) /*!< Disable write access watch in this PREGION */
+#define MWU_REGIONEN_PRGN0WA_Enable (1UL) /*!< Enable write access watch in this PREGION */
+
+/* Bit 7 : Enable/disable read access watch in region[3] */
+#define MWU_REGIONEN_RGN3RA_Pos (7UL) /*!< Position of RGN3RA field. */
+#define MWU_REGIONEN_RGN3RA_Msk (0x1UL << MWU_REGIONEN_RGN3RA_Pos) /*!< Bit mask of RGN3RA field. */
+#define MWU_REGIONEN_RGN3RA_Disable (0UL) /*!< Disable read access watch in this region */
+#define MWU_REGIONEN_RGN3RA_Enable (1UL) /*!< Enable read access watch in this region */
+
+/* Bit 6 : Enable/disable write access watch in region[3] */
+#define MWU_REGIONEN_RGN3WA_Pos (6UL) /*!< Position of RGN3WA field. */
+#define MWU_REGIONEN_RGN3WA_Msk (0x1UL << MWU_REGIONEN_RGN3WA_Pos) /*!< Bit mask of RGN3WA field. */
+#define MWU_REGIONEN_RGN3WA_Disable (0UL) /*!< Disable write access watch in this region */
+#define MWU_REGIONEN_RGN3WA_Enable (1UL) /*!< Enable write access watch in this region */
+
+/* Bit 5 : Enable/disable read access watch in region[2] */
+#define MWU_REGIONEN_RGN2RA_Pos (5UL) /*!< Position of RGN2RA field. */
+#define MWU_REGIONEN_RGN2RA_Msk (0x1UL << MWU_REGIONEN_RGN2RA_Pos) /*!< Bit mask of RGN2RA field. */
+#define MWU_REGIONEN_RGN2RA_Disable (0UL) /*!< Disable read access watch in this region */
+#define MWU_REGIONEN_RGN2RA_Enable (1UL) /*!< Enable read access watch in this region */
+
+/* Bit 4 : Enable/disable write access watch in region[2] */
+#define MWU_REGIONEN_RGN2WA_Pos (4UL) /*!< Position of RGN2WA field. */
+#define MWU_REGIONEN_RGN2WA_Msk (0x1UL << MWU_REGIONEN_RGN2WA_Pos) /*!< Bit mask of RGN2WA field. */
+#define MWU_REGIONEN_RGN2WA_Disable (0UL) /*!< Disable write access watch in this region */
+#define MWU_REGIONEN_RGN2WA_Enable (1UL) /*!< Enable write access watch in this region */
+
+/* Bit 3 : Enable/disable read access watch in region[1] */
+#define MWU_REGIONEN_RGN1RA_Pos (3UL) /*!< Position of RGN1RA field. */
+#define MWU_REGIONEN_RGN1RA_Msk (0x1UL << MWU_REGIONEN_RGN1RA_Pos) /*!< Bit mask of RGN1RA field. */
+#define MWU_REGIONEN_RGN1RA_Disable (0UL) /*!< Disable read access watch in this region */
+#define MWU_REGIONEN_RGN1RA_Enable (1UL) /*!< Enable read access watch in this region */
+
+/* Bit 2 : Enable/disable write access watch in region[1] */
+#define MWU_REGIONEN_RGN1WA_Pos (2UL) /*!< Position of RGN1WA field. */
+#define MWU_REGIONEN_RGN1WA_Msk (0x1UL << MWU_REGIONEN_RGN1WA_Pos) /*!< Bit mask of RGN1WA field. */
+#define MWU_REGIONEN_RGN1WA_Disable (0UL) /*!< Disable write access watch in this region */
+#define MWU_REGIONEN_RGN1WA_Enable (1UL) /*!< Enable write access watch in this region */
+
+/* Bit 1 : Enable/disable read access watch in region[0] */
+#define MWU_REGIONEN_RGN0RA_Pos (1UL) /*!< Position of RGN0RA field. */
+#define MWU_REGIONEN_RGN0RA_Msk (0x1UL << MWU_REGIONEN_RGN0RA_Pos) /*!< Bit mask of RGN0RA field. */
+#define MWU_REGIONEN_RGN0RA_Disable (0UL) /*!< Disable read access watch in this region */
+#define MWU_REGIONEN_RGN0RA_Enable (1UL) /*!< Enable read access watch in this region */
+
+/* Bit 0 : Enable/disable write access watch in region[0] */
+#define MWU_REGIONEN_RGN0WA_Pos (0UL) /*!< Position of RGN0WA field. */
+#define MWU_REGIONEN_RGN0WA_Msk (0x1UL << MWU_REGIONEN_RGN0WA_Pos) /*!< Bit mask of RGN0WA field. */
+#define MWU_REGIONEN_RGN0WA_Disable (0UL) /*!< Disable write access watch in this region */
+#define MWU_REGIONEN_RGN0WA_Enable (1UL) /*!< Enable write access watch in this region */
+
+/* Register: MWU_REGIONENSET */
+/* Description: Enable regions watch */
+
+/* Bit 27 : Enable read access watch in PREGION[1] */
+#define MWU_REGIONENSET_PRGN1RA_Pos (27UL) /*!< Position of PRGN1RA field. */
+#define MWU_REGIONENSET_PRGN1RA_Msk (0x1UL << MWU_REGIONENSET_PRGN1RA_Pos) /*!< Bit mask of PRGN1RA field. */
+#define MWU_REGIONENSET_PRGN1RA_Disabled (0UL) /*!< Read access watch in this PREGION is disabled */
+#define MWU_REGIONENSET_PRGN1RA_Enabled (1UL) /*!< Read access watch in this PREGION is enabled */
+#define MWU_REGIONENSET_PRGN1RA_Set (1UL) /*!< Enable read access watch in this PREGION */
+
+/* Bit 26 : Enable write access watch in PREGION[1] */
+#define MWU_REGIONENSET_PRGN1WA_Pos (26UL) /*!< Position of PRGN1WA field. */
+#define MWU_REGIONENSET_PRGN1WA_Msk (0x1UL << MWU_REGIONENSET_PRGN1WA_Pos) /*!< Bit mask of PRGN1WA field. */
+#define MWU_REGIONENSET_PRGN1WA_Disabled (0UL) /*!< Write access watch in this PREGION is disabled */
+#define MWU_REGIONENSET_PRGN1WA_Enabled (1UL) /*!< Write access watch in this PREGION is enabled */
+#define MWU_REGIONENSET_PRGN1WA_Set (1UL) /*!< Enable write access watch in this PREGION */
+
+/* Bit 25 : Enable read access watch in PREGION[0] */
+#define MWU_REGIONENSET_PRGN0RA_Pos (25UL) /*!< Position of PRGN0RA field. */
+#define MWU_REGIONENSET_PRGN0RA_Msk (0x1UL << MWU_REGIONENSET_PRGN0RA_Pos) /*!< Bit mask of PRGN0RA field. */
+#define MWU_REGIONENSET_PRGN0RA_Disabled (0UL) /*!< Read access watch in this PREGION is disabled */
+#define MWU_REGIONENSET_PRGN0RA_Enabled (1UL) /*!< Read access watch in this PREGION is enabled */
+#define MWU_REGIONENSET_PRGN0RA_Set (1UL) /*!< Enable read access watch in this PREGION */
+
+/* Bit 24 : Enable write access watch in PREGION[0] */
+#define MWU_REGIONENSET_PRGN0WA_Pos (24UL) /*!< Position of PRGN0WA field. */
+#define MWU_REGIONENSET_PRGN0WA_Msk (0x1UL << MWU_REGIONENSET_PRGN0WA_Pos) /*!< Bit mask of PRGN0WA field. */
+#define MWU_REGIONENSET_PRGN0WA_Disabled (0UL) /*!< Write access watch in this PREGION is disabled */
+#define MWU_REGIONENSET_PRGN0WA_Enabled (1UL) /*!< Write access watch in this PREGION is enabled */
+#define MWU_REGIONENSET_PRGN0WA_Set (1UL) /*!< Enable write access watch in this PREGION */
+
+/* Bit 7 : Enable read access watch in region[3] */
+#define MWU_REGIONENSET_RGN3RA_Pos (7UL) /*!< Position of RGN3RA field. */
+#define MWU_REGIONENSET_RGN3RA_Msk (0x1UL << MWU_REGIONENSET_RGN3RA_Pos) /*!< Bit mask of RGN3RA field. */
+#define MWU_REGIONENSET_RGN3RA_Disabled (0UL) /*!< Read access watch in this region is disabled */
+#define MWU_REGIONENSET_RGN3RA_Enabled (1UL) /*!< Read access watch in this region is enabled */
+#define MWU_REGIONENSET_RGN3RA_Set (1UL) /*!< Enable read access watch in this region */
+
+/* Bit 6 : Enable write access watch in region[3] */
+#define MWU_REGIONENSET_RGN3WA_Pos (6UL) /*!< Position of RGN3WA field. */
+#define MWU_REGIONENSET_RGN3WA_Msk (0x1UL << MWU_REGIONENSET_RGN3WA_Pos) /*!< Bit mask of RGN3WA field. */
+#define MWU_REGIONENSET_RGN3WA_Disabled (0UL) /*!< Write access watch in this region is disabled */
+#define MWU_REGIONENSET_RGN3WA_Enabled (1UL) /*!< Write access watch in this region is enabled */
+#define MWU_REGIONENSET_RGN3WA_Set (1UL) /*!< Enable write access watch in this region */
+
+/* Bit 5 : Enable read access watch in region[2] */
+#define MWU_REGIONENSET_RGN2RA_Pos (5UL) /*!< Position of RGN2RA field. */
+#define MWU_REGIONENSET_RGN2RA_Msk (0x1UL << MWU_REGIONENSET_RGN2RA_Pos) /*!< Bit mask of RGN2RA field. */
+#define MWU_REGIONENSET_RGN2RA_Disabled (0UL) /*!< Read access watch in this region is disabled */
+#define MWU_REGIONENSET_RGN2RA_Enabled (1UL) /*!< Read access watch in this region is enabled */
+#define MWU_REGIONENSET_RGN2RA_Set (1UL) /*!< Enable read access watch in this region */
+
+/* Bit 4 : Enable write access watch in region[2] */
+#define MWU_REGIONENSET_RGN2WA_Pos (4UL) /*!< Position of RGN2WA field. */
+#define MWU_REGIONENSET_RGN2WA_Msk (0x1UL << MWU_REGIONENSET_RGN2WA_Pos) /*!< Bit mask of RGN2WA field. */
+#define MWU_REGIONENSET_RGN2WA_Disabled (0UL) /*!< Write access watch in this region is disabled */
+#define MWU_REGIONENSET_RGN2WA_Enabled (1UL) /*!< Write access watch in this region is enabled */
+#define MWU_REGIONENSET_RGN2WA_Set (1UL) /*!< Enable write access watch in this region */
+
+/* Bit 3 : Enable read access watch in region[1] */
+#define MWU_REGIONENSET_RGN1RA_Pos (3UL) /*!< Position of RGN1RA field. */
+#define MWU_REGIONENSET_RGN1RA_Msk (0x1UL << MWU_REGIONENSET_RGN1RA_Pos) /*!< Bit mask of RGN1RA field. */
+#define MWU_REGIONENSET_RGN1RA_Disabled (0UL) /*!< Read access watch in this region is disabled */
+#define MWU_REGIONENSET_RGN1RA_Enabled (1UL) /*!< Read access watch in this region is enabled */
+#define MWU_REGIONENSET_RGN1RA_Set (1UL) /*!< Enable read access watch in this region */
+
+/* Bit 2 : Enable write access watch in region[1] */
+#define MWU_REGIONENSET_RGN1WA_Pos (2UL) /*!< Position of RGN1WA field. */
+#define MWU_REGIONENSET_RGN1WA_Msk (0x1UL << MWU_REGIONENSET_RGN1WA_Pos) /*!< Bit mask of RGN1WA field. */
+#define MWU_REGIONENSET_RGN1WA_Disabled (0UL) /*!< Write access watch in this region is disabled */
+#define MWU_REGIONENSET_RGN1WA_Enabled (1UL) /*!< Write access watch in this region is enabled */
+#define MWU_REGIONENSET_RGN1WA_Set (1UL) /*!< Enable write access watch in this region */
+
+/* Bit 1 : Enable read access watch in region[0] */
+#define MWU_REGIONENSET_RGN0RA_Pos (1UL) /*!< Position of RGN0RA field. */
+#define MWU_REGIONENSET_RGN0RA_Msk (0x1UL << MWU_REGIONENSET_RGN0RA_Pos) /*!< Bit mask of RGN0RA field. */
+#define MWU_REGIONENSET_RGN0RA_Disabled (0UL) /*!< Read access watch in this region is disabled */
+#define MWU_REGIONENSET_RGN0RA_Enabled (1UL) /*!< Read access watch in this region is enabled */
+#define MWU_REGIONENSET_RGN0RA_Set (1UL) /*!< Enable read access watch in this region */
+
+/* Bit 0 : Enable write access watch in region[0] */
+#define MWU_REGIONENSET_RGN0WA_Pos (0UL) /*!< Position of RGN0WA field. */
+#define MWU_REGIONENSET_RGN0WA_Msk (0x1UL << MWU_REGIONENSET_RGN0WA_Pos) /*!< Bit mask of RGN0WA field. */
+#define MWU_REGIONENSET_RGN0WA_Disabled (0UL) /*!< Write access watch in this region is disabled */
+#define MWU_REGIONENSET_RGN0WA_Enabled (1UL) /*!< Write access watch in this region is enabled */
+#define MWU_REGIONENSET_RGN0WA_Set (1UL) /*!< Enable write access watch in this region */
+
+/* Register: MWU_REGIONENCLR */
+/* Description: Disable regions watch */
+
+/* Bit 27 : Disable read access watch in PREGION[1] */
+#define MWU_REGIONENCLR_PRGN1RA_Pos (27UL) /*!< Position of PRGN1RA field. */
+#define MWU_REGIONENCLR_PRGN1RA_Msk (0x1UL << MWU_REGIONENCLR_PRGN1RA_Pos) /*!< Bit mask of PRGN1RA field. */
+#define MWU_REGIONENCLR_PRGN1RA_Disabled (0UL) /*!< Read access watch in this PREGION is disabled */
+#define MWU_REGIONENCLR_PRGN1RA_Enabled (1UL) /*!< Read access watch in this PREGION is enabled */
+#define MWU_REGIONENCLR_PRGN1RA_Clear (1UL) /*!< Disable read access watch in this PREGION */
+
+/* Bit 26 : Disable write access watch in PREGION[1] */
+#define MWU_REGIONENCLR_PRGN1WA_Pos (26UL) /*!< Position of PRGN1WA field. */
+#define MWU_REGIONENCLR_PRGN1WA_Msk (0x1UL << MWU_REGIONENCLR_PRGN1WA_Pos) /*!< Bit mask of PRGN1WA field. */
+#define MWU_REGIONENCLR_PRGN1WA_Disabled (0UL) /*!< Write access watch in this PREGION is disabled */
+#define MWU_REGIONENCLR_PRGN1WA_Enabled (1UL) /*!< Write access watch in this PREGION is enabled */
+#define MWU_REGIONENCLR_PRGN1WA_Clear (1UL) /*!< Disable write access watch in this PREGION */
+
+/* Bit 25 : Disable read access watch in PREGION[0] */
+#define MWU_REGIONENCLR_PRGN0RA_Pos (25UL) /*!< Position of PRGN0RA field. */
+#define MWU_REGIONENCLR_PRGN0RA_Msk (0x1UL << MWU_REGIONENCLR_PRGN0RA_Pos) /*!< Bit mask of PRGN0RA field. */
+#define MWU_REGIONENCLR_PRGN0RA_Disabled (0UL) /*!< Read access watch in this PREGION is disabled */
+#define MWU_REGIONENCLR_PRGN0RA_Enabled (1UL) /*!< Read access watch in this PREGION is enabled */
+#define MWU_REGIONENCLR_PRGN0RA_Clear (1UL) /*!< Disable read access watch in this PREGION */
+
+/* Bit 24 : Disable write access watch in PREGION[0] */
+#define MWU_REGIONENCLR_PRGN0WA_Pos (24UL) /*!< Position of PRGN0WA field. */
+#define MWU_REGIONENCLR_PRGN0WA_Msk (0x1UL << MWU_REGIONENCLR_PRGN0WA_Pos) /*!< Bit mask of PRGN0WA field. */
+#define MWU_REGIONENCLR_PRGN0WA_Disabled (0UL) /*!< Write access watch in this PREGION is disabled */
+#define MWU_REGIONENCLR_PRGN0WA_Enabled (1UL) /*!< Write access watch in this PREGION is enabled */
+#define MWU_REGIONENCLR_PRGN0WA_Clear (1UL) /*!< Disable write access watch in this PREGION */
+
+/* Bit 7 : Disable read access watch in region[3] */
+#define MWU_REGIONENCLR_RGN3RA_Pos (7UL) /*!< Position of RGN3RA field. */
+#define MWU_REGIONENCLR_RGN3RA_Msk (0x1UL << MWU_REGIONENCLR_RGN3RA_Pos) /*!< Bit mask of RGN3RA field. */
+#define MWU_REGIONENCLR_RGN3RA_Disabled (0UL) /*!< Read access watch in this region is disabled */
+#define MWU_REGIONENCLR_RGN3RA_Enabled (1UL) /*!< Read access watch in this region is enabled */
+#define MWU_REGIONENCLR_RGN3RA_Clear (1UL) /*!< Disable read access watch in this region */
+
+/* Bit 6 : Disable write access watch in region[3] */
+#define MWU_REGIONENCLR_RGN3WA_Pos (6UL) /*!< Position of RGN3WA field. */
+#define MWU_REGIONENCLR_RGN3WA_Msk (0x1UL << MWU_REGIONENCLR_RGN3WA_Pos) /*!< Bit mask of RGN3WA field. */
+#define MWU_REGIONENCLR_RGN3WA_Disabled (0UL) /*!< Write access watch in this region is disabled */
+#define MWU_REGIONENCLR_RGN3WA_Enabled (1UL) /*!< Write access watch in this region is enabled */
+#define MWU_REGIONENCLR_RGN3WA_Clear (1UL) /*!< Disable write access watch in this region */
+
+/* Bit 5 : Disable read access watch in region[2] */
+#define MWU_REGIONENCLR_RGN2RA_Pos (5UL) /*!< Position of RGN2RA field. */
+#define MWU_REGIONENCLR_RGN2RA_Msk (0x1UL << MWU_REGIONENCLR_RGN2RA_Pos) /*!< Bit mask of RGN2RA field. */
+#define MWU_REGIONENCLR_RGN2RA_Disabled (0UL) /*!< Read access watch in this region is disabled */
+#define MWU_REGIONENCLR_RGN2RA_Enabled (1UL) /*!< Read access watch in this region is enabled */
+#define MWU_REGIONENCLR_RGN2RA_Clear (1UL) /*!< Disable read access watch in this region */
+
+/* Bit 4 : Disable write access watch in region[2] */
+#define MWU_REGIONENCLR_RGN2WA_Pos (4UL) /*!< Position of RGN2WA field. */
+#define MWU_REGIONENCLR_RGN2WA_Msk (0x1UL << MWU_REGIONENCLR_RGN2WA_Pos) /*!< Bit mask of RGN2WA field. */
+#define MWU_REGIONENCLR_RGN2WA_Disabled (0UL) /*!< Write access watch in this region is disabled */
+#define MWU_REGIONENCLR_RGN2WA_Enabled (1UL) /*!< Write access watch in this region is enabled */
+#define MWU_REGIONENCLR_RGN2WA_Clear (1UL) /*!< Disable write access watch in this region */
+
+/* Bit 3 : Disable read access watch in region[1] */
+#define MWU_REGIONENCLR_RGN1RA_Pos (3UL) /*!< Position of RGN1RA field. */
+#define MWU_REGIONENCLR_RGN1RA_Msk (0x1UL << MWU_REGIONENCLR_RGN1RA_Pos) /*!< Bit mask of RGN1RA field. */
+#define MWU_REGIONENCLR_RGN1RA_Disabled (0UL) /*!< Read access watch in this region is disabled */
+#define MWU_REGIONENCLR_RGN1RA_Enabled (1UL) /*!< Read access watch in this region is enabled */
+#define MWU_REGIONENCLR_RGN1RA_Clear (1UL) /*!< Disable read access watch in this region */
+
+/* Bit 2 : Disable write access watch in region[1] */
+#define MWU_REGIONENCLR_RGN1WA_Pos (2UL) /*!< Position of RGN1WA field. */
+#define MWU_REGIONENCLR_RGN1WA_Msk (0x1UL << MWU_REGIONENCLR_RGN1WA_Pos) /*!< Bit mask of RGN1WA field. */
+#define MWU_REGIONENCLR_RGN1WA_Disabled (0UL) /*!< Write access watch in this region is disabled */
+#define MWU_REGIONENCLR_RGN1WA_Enabled (1UL) /*!< Write access watch in this region is enabled */
+#define MWU_REGIONENCLR_RGN1WA_Clear (1UL) /*!< Disable write access watch in this region */
+
+/* Bit 1 : Disable read access watch in region[0] */
+#define MWU_REGIONENCLR_RGN0RA_Pos (1UL) /*!< Position of RGN0RA field. */
+#define MWU_REGIONENCLR_RGN0RA_Msk (0x1UL << MWU_REGIONENCLR_RGN0RA_Pos) /*!< Bit mask of RGN0RA field. */
+#define MWU_REGIONENCLR_RGN0RA_Disabled (0UL) /*!< Read access watch in this region is disabled */
+#define MWU_REGIONENCLR_RGN0RA_Enabled (1UL) /*!< Read access watch in this region is enabled */
+#define MWU_REGIONENCLR_RGN0RA_Clear (1UL) /*!< Disable read access watch in this region */
+
+/* Bit 0 : Disable write access watch in region[0] */
+#define MWU_REGIONENCLR_RGN0WA_Pos (0UL) /*!< Position of RGN0WA field. */
+#define MWU_REGIONENCLR_RGN0WA_Msk (0x1UL << MWU_REGIONENCLR_RGN0WA_Pos) /*!< Bit mask of RGN0WA field. */
+#define MWU_REGIONENCLR_RGN0WA_Disabled (0UL) /*!< Write access watch in this region is disabled */
+#define MWU_REGIONENCLR_RGN0WA_Enabled (1UL) /*!< Write access watch in this region is enabled */
+#define MWU_REGIONENCLR_RGN0WA_Clear (1UL) /*!< Disable write access watch in this region */
+
+/* Register: MWU_REGION_START */
+/* Description: Description cluster[0]: Start address for region 0 */
+
+/* Bits 31..0 : Start address for region */
+#define MWU_REGION_START_START_Pos (0UL) /*!< Position of START field. */
+#define MWU_REGION_START_START_Msk (0xFFFFFFFFUL << MWU_REGION_START_START_Pos) /*!< Bit mask of START field. */
+
+/* Register: MWU_REGION_END */
+/* Description: Description cluster[0]: End address of region 0 */
+
+/* Bits 31..0 : End address of region. */
+#define MWU_REGION_END_END_Pos (0UL) /*!< Position of END field. */
+#define MWU_REGION_END_END_Msk (0xFFFFFFFFUL << MWU_REGION_END_END_Pos) /*!< Bit mask of END field. */
+
+/* Register: MWU_PREGION_START */
+/* Description: Description cluster[0]: Reserved for future use */
+
+/* Bits 31..0 : Reserved for future use */
+#define MWU_PREGION_START_START_Pos (0UL) /*!< Position of START field. */
+#define MWU_PREGION_START_START_Msk (0xFFFFFFFFUL << MWU_PREGION_START_START_Pos) /*!< Bit mask of START field. */
+
+/* Register: MWU_PREGION_END */
+/* Description: Description cluster[0]: Reserved for future use */
+
+/* Bits 31..0 : Reserved for future use */
+#define MWU_PREGION_END_END_Pos (0UL) /*!< Position of END field. */
+#define MWU_PREGION_END_END_Msk (0xFFFFFFFFUL << MWU_PREGION_END_END_Pos) /*!< Bit mask of END field. */
+
+/* Register: MWU_PREGION_SUBS */
+/* Description: Description cluster[0]: Subregions of region 0 */
+
+/* Bit 31 : Include or exclude subregion 31 in region */
+#define MWU_PREGION_SUBS_SR31_Pos (31UL) /*!< Position of SR31 field. */
+#define MWU_PREGION_SUBS_SR31_Msk (0x1UL << MWU_PREGION_SUBS_SR31_Pos) /*!< Bit mask of SR31 field. */
+#define MWU_PREGION_SUBS_SR31_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR31_Include (1UL) /*!< Include */
+
+/* Bit 30 : Include or exclude subregion 30 in region */
+#define MWU_PREGION_SUBS_SR30_Pos (30UL) /*!< Position of SR30 field. */
+#define MWU_PREGION_SUBS_SR30_Msk (0x1UL << MWU_PREGION_SUBS_SR30_Pos) /*!< Bit mask of SR30 field. */
+#define MWU_PREGION_SUBS_SR30_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR30_Include (1UL) /*!< Include */
+
+/* Bit 29 : Include or exclude subregion 29 in region */
+#define MWU_PREGION_SUBS_SR29_Pos (29UL) /*!< Position of SR29 field. */
+#define MWU_PREGION_SUBS_SR29_Msk (0x1UL << MWU_PREGION_SUBS_SR29_Pos) /*!< Bit mask of SR29 field. */
+#define MWU_PREGION_SUBS_SR29_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR29_Include (1UL) /*!< Include */
+
+/* Bit 28 : Include or exclude subregion 28 in region */
+#define MWU_PREGION_SUBS_SR28_Pos (28UL) /*!< Position of SR28 field. */
+#define MWU_PREGION_SUBS_SR28_Msk (0x1UL << MWU_PREGION_SUBS_SR28_Pos) /*!< Bit mask of SR28 field. */
+#define MWU_PREGION_SUBS_SR28_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR28_Include (1UL) /*!< Include */
+
+/* Bit 27 : Include or exclude subregion 27 in region */
+#define MWU_PREGION_SUBS_SR27_Pos (27UL) /*!< Position of SR27 field. */
+#define MWU_PREGION_SUBS_SR27_Msk (0x1UL << MWU_PREGION_SUBS_SR27_Pos) /*!< Bit mask of SR27 field. */
+#define MWU_PREGION_SUBS_SR27_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR27_Include (1UL) /*!< Include */
+
+/* Bit 26 : Include or exclude subregion 26 in region */
+#define MWU_PREGION_SUBS_SR26_Pos (26UL) /*!< Position of SR26 field. */
+#define MWU_PREGION_SUBS_SR26_Msk (0x1UL << MWU_PREGION_SUBS_SR26_Pos) /*!< Bit mask of SR26 field. */
+#define MWU_PREGION_SUBS_SR26_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR26_Include (1UL) /*!< Include */
+
+/* Bit 25 : Include or exclude subregion 25 in region */
+#define MWU_PREGION_SUBS_SR25_Pos (25UL) /*!< Position of SR25 field. */
+#define MWU_PREGION_SUBS_SR25_Msk (0x1UL << MWU_PREGION_SUBS_SR25_Pos) /*!< Bit mask of SR25 field. */
+#define MWU_PREGION_SUBS_SR25_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR25_Include (1UL) /*!< Include */
+
+/* Bit 24 : Include or exclude subregion 24 in region */
+#define MWU_PREGION_SUBS_SR24_Pos (24UL) /*!< Position of SR24 field. */
+#define MWU_PREGION_SUBS_SR24_Msk (0x1UL << MWU_PREGION_SUBS_SR24_Pos) /*!< Bit mask of SR24 field. */
+#define MWU_PREGION_SUBS_SR24_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR24_Include (1UL) /*!< Include */
+
+/* Bit 23 : Include or exclude subregion 23 in region */
+#define MWU_PREGION_SUBS_SR23_Pos (23UL) /*!< Position of SR23 field. */
+#define MWU_PREGION_SUBS_SR23_Msk (0x1UL << MWU_PREGION_SUBS_SR23_Pos) /*!< Bit mask of SR23 field. */
+#define MWU_PREGION_SUBS_SR23_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR23_Include (1UL) /*!< Include */
+
+/* Bit 22 : Include or exclude subregion 22 in region */
+#define MWU_PREGION_SUBS_SR22_Pos (22UL) /*!< Position of SR22 field. */
+#define MWU_PREGION_SUBS_SR22_Msk (0x1UL << MWU_PREGION_SUBS_SR22_Pos) /*!< Bit mask of SR22 field. */
+#define MWU_PREGION_SUBS_SR22_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR22_Include (1UL) /*!< Include */
+
+/* Bit 21 : Include or exclude subregion 21 in region */
+#define MWU_PREGION_SUBS_SR21_Pos (21UL) /*!< Position of SR21 field. */
+#define MWU_PREGION_SUBS_SR21_Msk (0x1UL << MWU_PREGION_SUBS_SR21_Pos) /*!< Bit mask of SR21 field. */
+#define MWU_PREGION_SUBS_SR21_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR21_Include (1UL) /*!< Include */
+
+/* Bit 20 : Include or exclude subregion 20 in region */
+#define MWU_PREGION_SUBS_SR20_Pos (20UL) /*!< Position of SR20 field. */
+#define MWU_PREGION_SUBS_SR20_Msk (0x1UL << MWU_PREGION_SUBS_SR20_Pos) /*!< Bit mask of SR20 field. */
+#define MWU_PREGION_SUBS_SR20_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR20_Include (1UL) /*!< Include */
+
+/* Bit 19 : Include or exclude subregion 19 in region */
+#define MWU_PREGION_SUBS_SR19_Pos (19UL) /*!< Position of SR19 field. */
+#define MWU_PREGION_SUBS_SR19_Msk (0x1UL << MWU_PREGION_SUBS_SR19_Pos) /*!< Bit mask of SR19 field. */
+#define MWU_PREGION_SUBS_SR19_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR19_Include (1UL) /*!< Include */
+
+/* Bit 18 : Include or exclude subregion 18 in region */
+#define MWU_PREGION_SUBS_SR18_Pos (18UL) /*!< Position of SR18 field. */
+#define MWU_PREGION_SUBS_SR18_Msk (0x1UL << MWU_PREGION_SUBS_SR18_Pos) /*!< Bit mask of SR18 field. */
+#define MWU_PREGION_SUBS_SR18_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR18_Include (1UL) /*!< Include */
+
+/* Bit 17 : Include or exclude subregion 17 in region */
+#define MWU_PREGION_SUBS_SR17_Pos (17UL) /*!< Position of SR17 field. */
+#define MWU_PREGION_SUBS_SR17_Msk (0x1UL << MWU_PREGION_SUBS_SR17_Pos) /*!< Bit mask of SR17 field. */
+#define MWU_PREGION_SUBS_SR17_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR17_Include (1UL) /*!< Include */
+
+/* Bit 16 : Include or exclude subregion 16 in region */
+#define MWU_PREGION_SUBS_SR16_Pos (16UL) /*!< Position of SR16 field. */
+#define MWU_PREGION_SUBS_SR16_Msk (0x1UL << MWU_PREGION_SUBS_SR16_Pos) /*!< Bit mask of SR16 field. */
+#define MWU_PREGION_SUBS_SR16_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR16_Include (1UL) /*!< Include */
+
+/* Bit 15 : Include or exclude subregion 15 in region */
+#define MWU_PREGION_SUBS_SR15_Pos (15UL) /*!< Position of SR15 field. */
+#define MWU_PREGION_SUBS_SR15_Msk (0x1UL << MWU_PREGION_SUBS_SR15_Pos) /*!< Bit mask of SR15 field. */
+#define MWU_PREGION_SUBS_SR15_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR15_Include (1UL) /*!< Include */
+
+/* Bit 14 : Include or exclude subregion 14 in region */
+#define MWU_PREGION_SUBS_SR14_Pos (14UL) /*!< Position of SR14 field. */
+#define MWU_PREGION_SUBS_SR14_Msk (0x1UL << MWU_PREGION_SUBS_SR14_Pos) /*!< Bit mask of SR14 field. */
+#define MWU_PREGION_SUBS_SR14_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR14_Include (1UL) /*!< Include */
+
+/* Bit 13 : Include or exclude subregion 13 in region */
+#define MWU_PREGION_SUBS_SR13_Pos (13UL) /*!< Position of SR13 field. */
+#define MWU_PREGION_SUBS_SR13_Msk (0x1UL << MWU_PREGION_SUBS_SR13_Pos) /*!< Bit mask of SR13 field. */
+#define MWU_PREGION_SUBS_SR13_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR13_Include (1UL) /*!< Include */
+
+/* Bit 12 : Include or exclude subregion 12 in region */
+#define MWU_PREGION_SUBS_SR12_Pos (12UL) /*!< Position of SR12 field. */
+#define MWU_PREGION_SUBS_SR12_Msk (0x1UL << MWU_PREGION_SUBS_SR12_Pos) /*!< Bit mask of SR12 field. */
+#define MWU_PREGION_SUBS_SR12_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR12_Include (1UL) /*!< Include */
+
+/* Bit 11 : Include or exclude subregion 11 in region */
+#define MWU_PREGION_SUBS_SR11_Pos (11UL) /*!< Position of SR11 field. */
+#define MWU_PREGION_SUBS_SR11_Msk (0x1UL << MWU_PREGION_SUBS_SR11_Pos) /*!< Bit mask of SR11 field. */
+#define MWU_PREGION_SUBS_SR11_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR11_Include (1UL) /*!< Include */
+
+/* Bit 10 : Include or exclude subregion 10 in region */
+#define MWU_PREGION_SUBS_SR10_Pos (10UL) /*!< Position of SR10 field. */
+#define MWU_PREGION_SUBS_SR10_Msk (0x1UL << MWU_PREGION_SUBS_SR10_Pos) /*!< Bit mask of SR10 field. */
+#define MWU_PREGION_SUBS_SR10_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR10_Include (1UL) /*!< Include */
+
+/* Bit 9 : Include or exclude subregion 9 in region */
+#define MWU_PREGION_SUBS_SR9_Pos (9UL) /*!< Position of SR9 field. */
+#define MWU_PREGION_SUBS_SR9_Msk (0x1UL << MWU_PREGION_SUBS_SR9_Pos) /*!< Bit mask of SR9 field. */
+#define MWU_PREGION_SUBS_SR9_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR9_Include (1UL) /*!< Include */
+
+/* Bit 8 : Include or exclude subregion 8 in region */
+#define MWU_PREGION_SUBS_SR8_Pos (8UL) /*!< Position of SR8 field. */
+#define MWU_PREGION_SUBS_SR8_Msk (0x1UL << MWU_PREGION_SUBS_SR8_Pos) /*!< Bit mask of SR8 field. */
+#define MWU_PREGION_SUBS_SR8_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR8_Include (1UL) /*!< Include */
+
+/* Bit 7 : Include or exclude subregion 7 in region */
+#define MWU_PREGION_SUBS_SR7_Pos (7UL) /*!< Position of SR7 field. */
+#define MWU_PREGION_SUBS_SR7_Msk (0x1UL << MWU_PREGION_SUBS_SR7_Pos) /*!< Bit mask of SR7 field. */
+#define MWU_PREGION_SUBS_SR7_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR7_Include (1UL) /*!< Include */
+
+/* Bit 6 : Include or exclude subregion 6 in region */
+#define MWU_PREGION_SUBS_SR6_Pos (6UL) /*!< Position of SR6 field. */
+#define MWU_PREGION_SUBS_SR6_Msk (0x1UL << MWU_PREGION_SUBS_SR6_Pos) /*!< Bit mask of SR6 field. */
+#define MWU_PREGION_SUBS_SR6_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR6_Include (1UL) /*!< Include */
+
+/* Bit 5 : Include or exclude subregion 5 in region */
+#define MWU_PREGION_SUBS_SR5_Pos (5UL) /*!< Position of SR5 field. */
+#define MWU_PREGION_SUBS_SR5_Msk (0x1UL << MWU_PREGION_SUBS_SR5_Pos) /*!< Bit mask of SR5 field. */
+#define MWU_PREGION_SUBS_SR5_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR5_Include (1UL) /*!< Include */
+
+/* Bit 4 : Include or exclude subregion 4 in region */
+#define MWU_PREGION_SUBS_SR4_Pos (4UL) /*!< Position of SR4 field. */
+#define MWU_PREGION_SUBS_SR4_Msk (0x1UL << MWU_PREGION_SUBS_SR4_Pos) /*!< Bit mask of SR4 field. */
+#define MWU_PREGION_SUBS_SR4_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR4_Include (1UL) /*!< Include */
+
+/* Bit 3 : Include or exclude subregion 3 in region */
+#define MWU_PREGION_SUBS_SR3_Pos (3UL) /*!< Position of SR3 field. */
+#define MWU_PREGION_SUBS_SR3_Msk (0x1UL << MWU_PREGION_SUBS_SR3_Pos) /*!< Bit mask of SR3 field. */
+#define MWU_PREGION_SUBS_SR3_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR3_Include (1UL) /*!< Include */
+
+/* Bit 2 : Include or exclude subregion 2 in region */
+#define MWU_PREGION_SUBS_SR2_Pos (2UL) /*!< Position of SR2 field. */
+#define MWU_PREGION_SUBS_SR2_Msk (0x1UL << MWU_PREGION_SUBS_SR2_Pos) /*!< Bit mask of SR2 field. */
+#define MWU_PREGION_SUBS_SR2_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR2_Include (1UL) /*!< Include */
+
+/* Bit 1 : Include or exclude subregion 1 in region */
+#define MWU_PREGION_SUBS_SR1_Pos (1UL) /*!< Position of SR1 field. */
+#define MWU_PREGION_SUBS_SR1_Msk (0x1UL << MWU_PREGION_SUBS_SR1_Pos) /*!< Bit mask of SR1 field. */
+#define MWU_PREGION_SUBS_SR1_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR1_Include (1UL) /*!< Include */
+
+/* Bit 0 : Include or exclude subregion 0 in region */
+#define MWU_PREGION_SUBS_SR0_Pos (0UL) /*!< Position of SR0 field. */
+#define MWU_PREGION_SUBS_SR0_Msk (0x1UL << MWU_PREGION_SUBS_SR0_Pos) /*!< Bit mask of SR0 field. */
+#define MWU_PREGION_SUBS_SR0_Exclude (0UL) /*!< Exclude */
+#define MWU_PREGION_SUBS_SR0_Include (1UL) /*!< Include */
+
+
+/* Peripheral: NFCT */
+/* Description: NFC-A compatible radio */
+
+/* Register: NFCT_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 1 : Shortcut between FIELDLOST event and SENSE task */
+#define NFCT_SHORTS_FIELDLOST_SENSE_Pos (1UL) /*!< Position of FIELDLOST_SENSE field. */
+#define NFCT_SHORTS_FIELDLOST_SENSE_Msk (0x1UL << NFCT_SHORTS_FIELDLOST_SENSE_Pos) /*!< Bit mask of FIELDLOST_SENSE field. */
+#define NFCT_SHORTS_FIELDLOST_SENSE_Disabled (0UL) /*!< Disable shortcut */
+#define NFCT_SHORTS_FIELDLOST_SENSE_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 0 : Shortcut between FIELDDETECTED event and ACTIVATE task */
+#define NFCT_SHORTS_FIELDDETECTED_ACTIVATE_Pos (0UL) /*!< Position of FIELDDETECTED_ACTIVATE field. */
+#define NFCT_SHORTS_FIELDDETECTED_ACTIVATE_Msk (0x1UL << NFCT_SHORTS_FIELDDETECTED_ACTIVATE_Pos) /*!< Bit mask of FIELDDETECTED_ACTIVATE field. */
+#define NFCT_SHORTS_FIELDDETECTED_ACTIVATE_Disabled (0UL) /*!< Disable shortcut */
+#define NFCT_SHORTS_FIELDDETECTED_ACTIVATE_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: NFCT_INTEN */
+/* Description: Enable or disable interrupt */
+
+/* Bit 20 : Enable or disable interrupt for STARTED event */
+#define NFCT_INTEN_STARTED_Pos (20UL) /*!< Position of STARTED field. */
+#define NFCT_INTEN_STARTED_Msk (0x1UL << NFCT_INTEN_STARTED_Pos) /*!< Bit mask of STARTED field. */
+#define NFCT_INTEN_STARTED_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_STARTED_Enabled (1UL) /*!< Enable */
+
+/* Bit 19 : Enable or disable interrupt for SELECTED event */
+#define NFCT_INTEN_SELECTED_Pos (19UL) /*!< Position of SELECTED field. */
+#define NFCT_INTEN_SELECTED_Msk (0x1UL << NFCT_INTEN_SELECTED_Pos) /*!< Bit mask of SELECTED field. */
+#define NFCT_INTEN_SELECTED_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_SELECTED_Enabled (1UL) /*!< Enable */
+
+/* Bit 18 : Enable or disable interrupt for COLLISION event */
+#define NFCT_INTEN_COLLISION_Pos (18UL) /*!< Position of COLLISION field. */
+#define NFCT_INTEN_COLLISION_Msk (0x1UL << NFCT_INTEN_COLLISION_Pos) /*!< Bit mask of COLLISION field. */
+#define NFCT_INTEN_COLLISION_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_COLLISION_Enabled (1UL) /*!< Enable */
+
+/* Bit 14 : Enable or disable interrupt for AUTOCOLRESSTARTED event */
+#define NFCT_INTEN_AUTOCOLRESSTARTED_Pos (14UL) /*!< Position of AUTOCOLRESSTARTED field. */
+#define NFCT_INTEN_AUTOCOLRESSTARTED_Msk (0x1UL << NFCT_INTEN_AUTOCOLRESSTARTED_Pos) /*!< Bit mask of AUTOCOLRESSTARTED field. */
+#define NFCT_INTEN_AUTOCOLRESSTARTED_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_AUTOCOLRESSTARTED_Enabled (1UL) /*!< Enable */
+
+/* Bit 12 : Enable or disable interrupt for ENDTX event */
+#define NFCT_INTEN_ENDTX_Pos (12UL) /*!< Position of ENDTX field. */
+#define NFCT_INTEN_ENDTX_Msk (0x1UL << NFCT_INTEN_ENDTX_Pos) /*!< Bit mask of ENDTX field. */
+#define NFCT_INTEN_ENDTX_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_ENDTX_Enabled (1UL) /*!< Enable */
+
+/* Bit 11 : Enable or disable interrupt for ENDRX event */
+#define NFCT_INTEN_ENDRX_Pos (11UL) /*!< Position of ENDRX field. */
+#define NFCT_INTEN_ENDRX_Msk (0x1UL << NFCT_INTEN_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define NFCT_INTEN_ENDRX_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_ENDRX_Enabled (1UL) /*!< Enable */
+
+/* Bit 10 : Enable or disable interrupt for RXERROR event */
+#define NFCT_INTEN_RXERROR_Pos (10UL) /*!< Position of RXERROR field. */
+#define NFCT_INTEN_RXERROR_Msk (0x1UL << NFCT_INTEN_RXERROR_Pos) /*!< Bit mask of RXERROR field. */
+#define NFCT_INTEN_RXERROR_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_RXERROR_Enabled (1UL) /*!< Enable */
+
+/* Bit 7 : Enable or disable interrupt for ERROR event */
+#define NFCT_INTEN_ERROR_Pos (7UL) /*!< Position of ERROR field. */
+#define NFCT_INTEN_ERROR_Msk (0x1UL << NFCT_INTEN_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define NFCT_INTEN_ERROR_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_ERROR_Enabled (1UL) /*!< Enable */
+
+/* Bit 6 : Enable or disable interrupt for RXFRAMEEND event */
+#define NFCT_INTEN_RXFRAMEEND_Pos (6UL) /*!< Position of RXFRAMEEND field. */
+#define NFCT_INTEN_RXFRAMEEND_Msk (0x1UL << NFCT_INTEN_RXFRAMEEND_Pos) /*!< Bit mask of RXFRAMEEND field. */
+#define NFCT_INTEN_RXFRAMEEND_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_RXFRAMEEND_Enabled (1UL) /*!< Enable */
+
+/* Bit 5 : Enable or disable interrupt for RXFRAMESTART event */
+#define NFCT_INTEN_RXFRAMESTART_Pos (5UL) /*!< Position of RXFRAMESTART field. */
+#define NFCT_INTEN_RXFRAMESTART_Msk (0x1UL << NFCT_INTEN_RXFRAMESTART_Pos) /*!< Bit mask of RXFRAMESTART field. */
+#define NFCT_INTEN_RXFRAMESTART_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_RXFRAMESTART_Enabled (1UL) /*!< Enable */
+
+/* Bit 4 : Enable or disable interrupt for TXFRAMEEND event */
+#define NFCT_INTEN_TXFRAMEEND_Pos (4UL) /*!< Position of TXFRAMEEND field. */
+#define NFCT_INTEN_TXFRAMEEND_Msk (0x1UL << NFCT_INTEN_TXFRAMEEND_Pos) /*!< Bit mask of TXFRAMEEND field. */
+#define NFCT_INTEN_TXFRAMEEND_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_TXFRAMEEND_Enabled (1UL) /*!< Enable */
+
+/* Bit 3 : Enable or disable interrupt for TXFRAMESTART event */
+#define NFCT_INTEN_TXFRAMESTART_Pos (3UL) /*!< Position of TXFRAMESTART field. */
+#define NFCT_INTEN_TXFRAMESTART_Msk (0x1UL << NFCT_INTEN_TXFRAMESTART_Pos) /*!< Bit mask of TXFRAMESTART field. */
+#define NFCT_INTEN_TXFRAMESTART_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_TXFRAMESTART_Enabled (1UL) /*!< Enable */
+
+/* Bit 2 : Enable or disable interrupt for FIELDLOST event */
+#define NFCT_INTEN_FIELDLOST_Pos (2UL) /*!< Position of FIELDLOST field. */
+#define NFCT_INTEN_FIELDLOST_Msk (0x1UL << NFCT_INTEN_FIELDLOST_Pos) /*!< Bit mask of FIELDLOST field. */
+#define NFCT_INTEN_FIELDLOST_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_FIELDLOST_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable interrupt for FIELDDETECTED event */
+#define NFCT_INTEN_FIELDDETECTED_Pos (1UL) /*!< Position of FIELDDETECTED field. */
+#define NFCT_INTEN_FIELDDETECTED_Msk (0x1UL << NFCT_INTEN_FIELDDETECTED_Pos) /*!< Bit mask of FIELDDETECTED field. */
+#define NFCT_INTEN_FIELDDETECTED_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_FIELDDETECTED_Enabled (1UL) /*!< Enable */
+
+/* Bit 0 : Enable or disable interrupt for READY event */
+#define NFCT_INTEN_READY_Pos (0UL) /*!< Position of READY field. */
+#define NFCT_INTEN_READY_Msk (0x1UL << NFCT_INTEN_READY_Pos) /*!< Bit mask of READY field. */
+#define NFCT_INTEN_READY_Disabled (0UL) /*!< Disable */
+#define NFCT_INTEN_READY_Enabled (1UL) /*!< Enable */
+
+/* Register: NFCT_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 20 : Write '1' to Enable interrupt for STARTED event */
+#define NFCT_INTENSET_STARTED_Pos (20UL) /*!< Position of STARTED field. */
+#define NFCT_INTENSET_STARTED_Msk (0x1UL << NFCT_INTENSET_STARTED_Pos) /*!< Bit mask of STARTED field. */
+#define NFCT_INTENSET_STARTED_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_STARTED_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_STARTED_Set (1UL) /*!< Enable */
+
+/* Bit 19 : Write '1' to Enable interrupt for SELECTED event */
+#define NFCT_INTENSET_SELECTED_Pos (19UL) /*!< Position of SELECTED field. */
+#define NFCT_INTENSET_SELECTED_Msk (0x1UL << NFCT_INTENSET_SELECTED_Pos) /*!< Bit mask of SELECTED field. */
+#define NFCT_INTENSET_SELECTED_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_SELECTED_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_SELECTED_Set (1UL) /*!< Enable */
+
+/* Bit 18 : Write '1' to Enable interrupt for COLLISION event */
+#define NFCT_INTENSET_COLLISION_Pos (18UL) /*!< Position of COLLISION field. */
+#define NFCT_INTENSET_COLLISION_Msk (0x1UL << NFCT_INTENSET_COLLISION_Pos) /*!< Bit mask of COLLISION field. */
+#define NFCT_INTENSET_COLLISION_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_COLLISION_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_COLLISION_Set (1UL) /*!< Enable */
+
+/* Bit 14 : Write '1' to Enable interrupt for AUTOCOLRESSTARTED event */
+#define NFCT_INTENSET_AUTOCOLRESSTARTED_Pos (14UL) /*!< Position of AUTOCOLRESSTARTED field. */
+#define NFCT_INTENSET_AUTOCOLRESSTARTED_Msk (0x1UL << NFCT_INTENSET_AUTOCOLRESSTARTED_Pos) /*!< Bit mask of AUTOCOLRESSTARTED field. */
+#define NFCT_INTENSET_AUTOCOLRESSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_AUTOCOLRESSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_AUTOCOLRESSTARTED_Set (1UL) /*!< Enable */
+
+/* Bit 12 : Write '1' to Enable interrupt for ENDTX event */
+#define NFCT_INTENSET_ENDTX_Pos (12UL) /*!< Position of ENDTX field. */
+#define NFCT_INTENSET_ENDTX_Msk (0x1UL << NFCT_INTENSET_ENDTX_Pos) /*!< Bit mask of ENDTX field. */
+#define NFCT_INTENSET_ENDTX_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_ENDTX_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_ENDTX_Set (1UL) /*!< Enable */
+
+/* Bit 11 : Write '1' to Enable interrupt for ENDRX event */
+#define NFCT_INTENSET_ENDRX_Pos (11UL) /*!< Position of ENDRX field. */
+#define NFCT_INTENSET_ENDRX_Msk (0x1UL << NFCT_INTENSET_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define NFCT_INTENSET_ENDRX_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_ENDRX_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_ENDRX_Set (1UL) /*!< Enable */
+
+/* Bit 10 : Write '1' to Enable interrupt for RXERROR event */
+#define NFCT_INTENSET_RXERROR_Pos (10UL) /*!< Position of RXERROR field. */
+#define NFCT_INTENSET_RXERROR_Msk (0x1UL << NFCT_INTENSET_RXERROR_Pos) /*!< Bit mask of RXERROR field. */
+#define NFCT_INTENSET_RXERROR_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_RXERROR_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_RXERROR_Set (1UL) /*!< Enable */
+
+/* Bit 7 : Write '1' to Enable interrupt for ERROR event */
+#define NFCT_INTENSET_ERROR_Pos (7UL) /*!< Position of ERROR field. */
+#define NFCT_INTENSET_ERROR_Msk (0x1UL << NFCT_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define NFCT_INTENSET_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_ERROR_Set (1UL) /*!< Enable */
+
+/* Bit 6 : Write '1' to Enable interrupt for RXFRAMEEND event */
+#define NFCT_INTENSET_RXFRAMEEND_Pos (6UL) /*!< Position of RXFRAMEEND field. */
+#define NFCT_INTENSET_RXFRAMEEND_Msk (0x1UL << NFCT_INTENSET_RXFRAMEEND_Pos) /*!< Bit mask of RXFRAMEEND field. */
+#define NFCT_INTENSET_RXFRAMEEND_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_RXFRAMEEND_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_RXFRAMEEND_Set (1UL) /*!< Enable */
+
+/* Bit 5 : Write '1' to Enable interrupt for RXFRAMESTART event */
+#define NFCT_INTENSET_RXFRAMESTART_Pos (5UL) /*!< Position of RXFRAMESTART field. */
+#define NFCT_INTENSET_RXFRAMESTART_Msk (0x1UL << NFCT_INTENSET_RXFRAMESTART_Pos) /*!< Bit mask of RXFRAMESTART field. */
+#define NFCT_INTENSET_RXFRAMESTART_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_RXFRAMESTART_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_RXFRAMESTART_Set (1UL) /*!< Enable */
+
+/* Bit 4 : Write '1' to Enable interrupt for TXFRAMEEND event */
+#define NFCT_INTENSET_TXFRAMEEND_Pos (4UL) /*!< Position of TXFRAMEEND field. */
+#define NFCT_INTENSET_TXFRAMEEND_Msk (0x1UL << NFCT_INTENSET_TXFRAMEEND_Pos) /*!< Bit mask of TXFRAMEEND field. */
+#define NFCT_INTENSET_TXFRAMEEND_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_TXFRAMEEND_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_TXFRAMEEND_Set (1UL) /*!< Enable */
+
+/* Bit 3 : Write '1' to Enable interrupt for TXFRAMESTART event */
+#define NFCT_INTENSET_TXFRAMESTART_Pos (3UL) /*!< Position of TXFRAMESTART field. */
+#define NFCT_INTENSET_TXFRAMESTART_Msk (0x1UL << NFCT_INTENSET_TXFRAMESTART_Pos) /*!< Bit mask of TXFRAMESTART field. */
+#define NFCT_INTENSET_TXFRAMESTART_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_TXFRAMESTART_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_TXFRAMESTART_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for FIELDLOST event */
+#define NFCT_INTENSET_FIELDLOST_Pos (2UL) /*!< Position of FIELDLOST field. */
+#define NFCT_INTENSET_FIELDLOST_Msk (0x1UL << NFCT_INTENSET_FIELDLOST_Pos) /*!< Bit mask of FIELDLOST field. */
+#define NFCT_INTENSET_FIELDLOST_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_FIELDLOST_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_FIELDLOST_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for FIELDDETECTED event */
+#define NFCT_INTENSET_FIELDDETECTED_Pos (1UL) /*!< Position of FIELDDETECTED field. */
+#define NFCT_INTENSET_FIELDDETECTED_Msk (0x1UL << NFCT_INTENSET_FIELDDETECTED_Pos) /*!< Bit mask of FIELDDETECTED field. */
+#define NFCT_INTENSET_FIELDDETECTED_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_FIELDDETECTED_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_FIELDDETECTED_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for READY event */
+#define NFCT_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */
+#define NFCT_INTENSET_READY_Msk (0x1UL << NFCT_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
+#define NFCT_INTENSET_READY_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENSET_READY_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENSET_READY_Set (1UL) /*!< Enable */
+
+/* Register: NFCT_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 20 : Write '1' to Disable interrupt for STARTED event */
+#define NFCT_INTENCLR_STARTED_Pos (20UL) /*!< Position of STARTED field. */
+#define NFCT_INTENCLR_STARTED_Msk (0x1UL << NFCT_INTENCLR_STARTED_Pos) /*!< Bit mask of STARTED field. */
+#define NFCT_INTENCLR_STARTED_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_STARTED_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_STARTED_Clear (1UL) /*!< Disable */
+
+/* Bit 19 : Write '1' to Disable interrupt for SELECTED event */
+#define NFCT_INTENCLR_SELECTED_Pos (19UL) /*!< Position of SELECTED field. */
+#define NFCT_INTENCLR_SELECTED_Msk (0x1UL << NFCT_INTENCLR_SELECTED_Pos) /*!< Bit mask of SELECTED field. */
+#define NFCT_INTENCLR_SELECTED_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_SELECTED_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_SELECTED_Clear (1UL) /*!< Disable */
+
+/* Bit 18 : Write '1' to Disable interrupt for COLLISION event */
+#define NFCT_INTENCLR_COLLISION_Pos (18UL) /*!< Position of COLLISION field. */
+#define NFCT_INTENCLR_COLLISION_Msk (0x1UL << NFCT_INTENCLR_COLLISION_Pos) /*!< Bit mask of COLLISION field. */
+#define NFCT_INTENCLR_COLLISION_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_COLLISION_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_COLLISION_Clear (1UL) /*!< Disable */
+
+/* Bit 14 : Write '1' to Disable interrupt for AUTOCOLRESSTARTED event */
+#define NFCT_INTENCLR_AUTOCOLRESSTARTED_Pos (14UL) /*!< Position of AUTOCOLRESSTARTED field. */
+#define NFCT_INTENCLR_AUTOCOLRESSTARTED_Msk (0x1UL << NFCT_INTENCLR_AUTOCOLRESSTARTED_Pos) /*!< Bit mask of AUTOCOLRESSTARTED field. */
+#define NFCT_INTENCLR_AUTOCOLRESSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_AUTOCOLRESSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_AUTOCOLRESSTARTED_Clear (1UL) /*!< Disable */
+
+/* Bit 12 : Write '1' to Disable interrupt for ENDTX event */
+#define NFCT_INTENCLR_ENDTX_Pos (12UL) /*!< Position of ENDTX field. */
+#define NFCT_INTENCLR_ENDTX_Msk (0x1UL << NFCT_INTENCLR_ENDTX_Pos) /*!< Bit mask of ENDTX field. */
+#define NFCT_INTENCLR_ENDTX_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_ENDTX_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_ENDTX_Clear (1UL) /*!< Disable */
+
+/* Bit 11 : Write '1' to Disable interrupt for ENDRX event */
+#define NFCT_INTENCLR_ENDRX_Pos (11UL) /*!< Position of ENDRX field. */
+#define NFCT_INTENCLR_ENDRX_Msk (0x1UL << NFCT_INTENCLR_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define NFCT_INTENCLR_ENDRX_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_ENDRX_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_ENDRX_Clear (1UL) /*!< Disable */
+
+/* Bit 10 : Write '1' to Disable interrupt for RXERROR event */
+#define NFCT_INTENCLR_RXERROR_Pos (10UL) /*!< Position of RXERROR field. */
+#define NFCT_INTENCLR_RXERROR_Msk (0x1UL << NFCT_INTENCLR_RXERROR_Pos) /*!< Bit mask of RXERROR field. */
+#define NFCT_INTENCLR_RXERROR_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_RXERROR_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_RXERROR_Clear (1UL) /*!< Disable */
+
+/* Bit 7 : Write '1' to Disable interrupt for ERROR event */
+#define NFCT_INTENCLR_ERROR_Pos (7UL) /*!< Position of ERROR field. */
+#define NFCT_INTENCLR_ERROR_Msk (0x1UL << NFCT_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define NFCT_INTENCLR_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_ERROR_Clear (1UL) /*!< Disable */
+
+/* Bit 6 : Write '1' to Disable interrupt for RXFRAMEEND event */
+#define NFCT_INTENCLR_RXFRAMEEND_Pos (6UL) /*!< Position of RXFRAMEEND field. */
+#define NFCT_INTENCLR_RXFRAMEEND_Msk (0x1UL << NFCT_INTENCLR_RXFRAMEEND_Pos) /*!< Bit mask of RXFRAMEEND field. */
+#define NFCT_INTENCLR_RXFRAMEEND_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_RXFRAMEEND_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_RXFRAMEEND_Clear (1UL) /*!< Disable */
+
+/* Bit 5 : Write '1' to Disable interrupt for RXFRAMESTART event */
+#define NFCT_INTENCLR_RXFRAMESTART_Pos (5UL) /*!< Position of RXFRAMESTART field. */
+#define NFCT_INTENCLR_RXFRAMESTART_Msk (0x1UL << NFCT_INTENCLR_RXFRAMESTART_Pos) /*!< Bit mask of RXFRAMESTART field. */
+#define NFCT_INTENCLR_RXFRAMESTART_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_RXFRAMESTART_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_RXFRAMESTART_Clear (1UL) /*!< Disable */
+
+/* Bit 4 : Write '1' to Disable interrupt for TXFRAMEEND event */
+#define NFCT_INTENCLR_TXFRAMEEND_Pos (4UL) /*!< Position of TXFRAMEEND field. */
+#define NFCT_INTENCLR_TXFRAMEEND_Msk (0x1UL << NFCT_INTENCLR_TXFRAMEEND_Pos) /*!< Bit mask of TXFRAMEEND field. */
+#define NFCT_INTENCLR_TXFRAMEEND_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_TXFRAMEEND_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_TXFRAMEEND_Clear (1UL) /*!< Disable */
+
+/* Bit 3 : Write '1' to Disable interrupt for TXFRAMESTART event */
+#define NFCT_INTENCLR_TXFRAMESTART_Pos (3UL) /*!< Position of TXFRAMESTART field. */
+#define NFCT_INTENCLR_TXFRAMESTART_Msk (0x1UL << NFCT_INTENCLR_TXFRAMESTART_Pos) /*!< Bit mask of TXFRAMESTART field. */
+#define NFCT_INTENCLR_TXFRAMESTART_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_TXFRAMESTART_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_TXFRAMESTART_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for FIELDLOST event */
+#define NFCT_INTENCLR_FIELDLOST_Pos (2UL) /*!< Position of FIELDLOST field. */
+#define NFCT_INTENCLR_FIELDLOST_Msk (0x1UL << NFCT_INTENCLR_FIELDLOST_Pos) /*!< Bit mask of FIELDLOST field. */
+#define NFCT_INTENCLR_FIELDLOST_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_FIELDLOST_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_FIELDLOST_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for FIELDDETECTED event */
+#define NFCT_INTENCLR_FIELDDETECTED_Pos (1UL) /*!< Position of FIELDDETECTED field. */
+#define NFCT_INTENCLR_FIELDDETECTED_Msk (0x1UL << NFCT_INTENCLR_FIELDDETECTED_Pos) /*!< Bit mask of FIELDDETECTED field. */
+#define NFCT_INTENCLR_FIELDDETECTED_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_FIELDDETECTED_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_FIELDDETECTED_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for READY event */
+#define NFCT_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */
+#define NFCT_INTENCLR_READY_Msk (0x1UL << NFCT_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
+#define NFCT_INTENCLR_READY_Disabled (0UL) /*!< Read: Disabled */
+#define NFCT_INTENCLR_READY_Enabled (1UL) /*!< Read: Enabled */
+#define NFCT_INTENCLR_READY_Clear (1UL) /*!< Disable */
+
+/* Register: NFCT_ERRORSTATUS */
+/* Description: NFC Error Status register */
+
+/* Bit 3 : Field level is too low at min load resistance */
+#define NFCT_ERRORSTATUS_NFCFIELDTOOWEAK_Pos (3UL) /*!< Position of NFCFIELDTOOWEAK field. */
+#define NFCT_ERRORSTATUS_NFCFIELDTOOWEAK_Msk (0x1UL << NFCT_ERRORSTATUS_NFCFIELDTOOWEAK_Pos) /*!< Bit mask of NFCFIELDTOOWEAK field. */
+
+/* Bit 2 : Field level is too high at max load resistance */
+#define NFCT_ERRORSTATUS_NFCFIELDTOOSTRONG_Pos (2UL) /*!< Position of NFCFIELDTOOSTRONG field. */
+#define NFCT_ERRORSTATUS_NFCFIELDTOOSTRONG_Msk (0x1UL << NFCT_ERRORSTATUS_NFCFIELDTOOSTRONG_Pos) /*!< Bit mask of NFCFIELDTOOSTRONG field. */
+
+/* Bit 0 : No STARTTX task triggered before expiration of the time set in FRAMEDELAYMAX */
+#define NFCT_ERRORSTATUS_FRAMEDELAYTIMEOUT_Pos (0UL) /*!< Position of FRAMEDELAYTIMEOUT field. */
+#define NFCT_ERRORSTATUS_FRAMEDELAYTIMEOUT_Msk (0x1UL << NFCT_ERRORSTATUS_FRAMEDELAYTIMEOUT_Pos) /*!< Bit mask of FRAMEDELAYTIMEOUT field. */
+
+/* Register: NFCT_FRAMESTATUS_RX */
+/* Description: Result of last incoming frames */
+
+/* Bit 3 : Overrun detected */
+#define NFCT_FRAMESTATUS_RX_OVERRUN_Pos (3UL) /*!< Position of OVERRUN field. */
+#define NFCT_FRAMESTATUS_RX_OVERRUN_Msk (0x1UL << NFCT_FRAMESTATUS_RX_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */
+#define NFCT_FRAMESTATUS_RX_OVERRUN_NoOverrun (0UL) /*!< No overrun detected */
+#define NFCT_FRAMESTATUS_RX_OVERRUN_Overrun (1UL) /*!< Overrun error */
+
+/* Bit 2 : Parity status of received frame */
+#define NFCT_FRAMESTATUS_RX_PARITYSTATUS_Pos (2UL) /*!< Position of PARITYSTATUS field. */
+#define NFCT_FRAMESTATUS_RX_PARITYSTATUS_Msk (0x1UL << NFCT_FRAMESTATUS_RX_PARITYSTATUS_Pos) /*!< Bit mask of PARITYSTATUS field. */
+#define NFCT_FRAMESTATUS_RX_PARITYSTATUS_ParityOK (0UL) /*!< Frame received with parity OK */
+#define NFCT_FRAMESTATUS_RX_PARITYSTATUS_ParityError (1UL) /*!< Frame received with parity error */
+
+/* Bit 0 : No valid End of Frame detected */
+#define NFCT_FRAMESTATUS_RX_CRCERROR_Pos (0UL) /*!< Position of CRCERROR field. */
+#define NFCT_FRAMESTATUS_RX_CRCERROR_Msk (0x1UL << NFCT_FRAMESTATUS_RX_CRCERROR_Pos) /*!< Bit mask of CRCERROR field. */
+#define NFCT_FRAMESTATUS_RX_CRCERROR_CRCCorrect (0UL) /*!< Valid CRC detected */
+#define NFCT_FRAMESTATUS_RX_CRCERROR_CRCError (1UL) /*!< CRC received does not match local check */
+
+/* Register: NFCT_CURRENTLOADCTRL */
+/* Description: Current value driven to the NFC Load Control */
+
+/* Bits 5..0 : Current value driven to the NFC Load Control */
+#define NFCT_CURRENTLOADCTRL_CURRENTLOADCTRL_Pos (0UL) /*!< Position of CURRENTLOADCTRL field. */
+#define NFCT_CURRENTLOADCTRL_CURRENTLOADCTRL_Msk (0x3FUL << NFCT_CURRENTLOADCTRL_CURRENTLOADCTRL_Pos) /*!< Bit mask of CURRENTLOADCTRL field. */
+
+/* Register: NFCT_FIELDPRESENT */
+/* Description: Indicates the presence or not of a valid field */
+
+/* Bit 1 : Indicates if the low level has locked to the field */
+#define NFCT_FIELDPRESENT_LOCKDETECT_Pos (1UL) /*!< Position of LOCKDETECT field. */
+#define NFCT_FIELDPRESENT_LOCKDETECT_Msk (0x1UL << NFCT_FIELDPRESENT_LOCKDETECT_Pos) /*!< Bit mask of LOCKDETECT field. */
+#define NFCT_FIELDPRESENT_LOCKDETECT_NotLocked (0UL) /*!< Not locked to field */
+#define NFCT_FIELDPRESENT_LOCKDETECT_Locked (1UL) /*!< Locked to field */
+
+/* Bit 0 : Indicates the presence or not of a valid field. Available only in the activated state. */
+#define NFCT_FIELDPRESENT_FIELDPRESENT_Pos (0UL) /*!< Position of FIELDPRESENT field. */
+#define NFCT_FIELDPRESENT_FIELDPRESENT_Msk (0x1UL << NFCT_FIELDPRESENT_FIELDPRESENT_Pos) /*!< Bit mask of FIELDPRESENT field. */
+#define NFCT_FIELDPRESENT_FIELDPRESENT_NoField (0UL) /*!< No valid field detected */
+#define NFCT_FIELDPRESENT_FIELDPRESENT_FieldPresent (1UL) /*!< Valid field detected */
+
+/* Register: NFCT_FRAMEDELAYMIN */
+/* Description: Minimum frame delay */
+
+/* Bits 15..0 : Minimum frame delay in number of 13.56 MHz clocks */
+#define NFCT_FRAMEDELAYMIN_FRAMEDELAYMIN_Pos (0UL) /*!< Position of FRAMEDELAYMIN field. */
+#define NFCT_FRAMEDELAYMIN_FRAMEDELAYMIN_Msk (0xFFFFUL << NFCT_FRAMEDELAYMIN_FRAMEDELAYMIN_Pos) /*!< Bit mask of FRAMEDELAYMIN field. */
+
+/* Register: NFCT_FRAMEDELAYMAX */
+/* Description: Maximum frame delay */
+
+/* Bits 15..0 : Maximum frame delay in number of 13.56 MHz clocks */
+#define NFCT_FRAMEDELAYMAX_FRAMEDELAYMAX_Pos (0UL) /*!< Position of FRAMEDELAYMAX field. */
+#define NFCT_FRAMEDELAYMAX_FRAMEDELAYMAX_Msk (0xFFFFUL << NFCT_FRAMEDELAYMAX_FRAMEDELAYMAX_Pos) /*!< Bit mask of FRAMEDELAYMAX field. */
+
+/* Register: NFCT_FRAMEDELAYMODE */
+/* Description: Configuration register for the Frame Delay Timer */
+
+/* Bits 1..0 : Configuration register for the Frame Delay Timer */
+#define NFCT_FRAMEDELAYMODE_FRAMEDELAYMODE_Pos (0UL) /*!< Position of FRAMEDELAYMODE field. */
+#define NFCT_FRAMEDELAYMODE_FRAMEDELAYMODE_Msk (0x3UL << NFCT_FRAMEDELAYMODE_FRAMEDELAYMODE_Pos) /*!< Bit mask of FRAMEDELAYMODE field. */
+#define NFCT_FRAMEDELAYMODE_FRAMEDELAYMODE_FreeRun (0UL) /*!< Transmission is independent of frame timer and will start when the STARTTX task is triggered. No timeout. */
+#define NFCT_FRAMEDELAYMODE_FRAMEDELAYMODE_Window (1UL) /*!< Frame is transmitted between FRAMEDELAYMIN and FRAMEDELAYMAX */
+#define NFCT_FRAMEDELAYMODE_FRAMEDELAYMODE_ExactVal (2UL) /*!< Frame is transmitted exactly at FRAMEDELAYMAX */
+#define NFCT_FRAMEDELAYMODE_FRAMEDELAYMODE_WindowGrid (3UL) /*!< Frame is transmitted on a bit grid between FRAMEDELAYMIN and FRAMEDELAYMAX */
+
+/* Register: NFCT_PACKETPTR */
+/* Description: Packet pointer for TXD and RXD data storage in Data RAM */
+
+/* Bits 31..0 : Packet pointer for TXD and RXD data storage in Data RAM. This address is a byte aligned RAM address. */
+#define NFCT_PACKETPTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define NFCT_PACKETPTR_PTR_Msk (0xFFFFFFFFUL << NFCT_PACKETPTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: NFCT_MAXLEN */
+/* Description: Size of allocated for TXD and RXD data storage buffer in Data RAM */
+
+/* Bits 8..0 : Size of allocated for TXD and RXD data storage buffer in Data RAM */
+#define NFCT_MAXLEN_MAXLEN_Pos (0UL) /*!< Position of MAXLEN field. */
+#define NFCT_MAXLEN_MAXLEN_Msk (0x1FFUL << NFCT_MAXLEN_MAXLEN_Pos) /*!< Bit mask of MAXLEN field. */
+
+/* Register: NFCT_TXD_FRAMECONFIG */
+/* Description: Configuration of outgoing frames */
+
+/* Bit 4 : CRC mode for outgoing frames */
+#define NFCT_TXD_FRAMECONFIG_CRCMODETX_Pos (4UL) /*!< Position of CRCMODETX field. */
+#define NFCT_TXD_FRAMECONFIG_CRCMODETX_Msk (0x1UL << NFCT_TXD_FRAMECONFIG_CRCMODETX_Pos) /*!< Bit mask of CRCMODETX field. */
+#define NFCT_TXD_FRAMECONFIG_CRCMODETX_NoCRCTX (0UL) /*!< CRC is not added to the frame */
+#define NFCT_TXD_FRAMECONFIG_CRCMODETX_CRC16TX (1UL) /*!< 16 bit CRC added to the frame based on all the data read from RAM that is used in the frame */
+
+/* Bit 2 : Adding SoF or not in TX frames */
+#define NFCT_TXD_FRAMECONFIG_SOF_Pos (2UL) /*!< Position of SOF field. */
+#define NFCT_TXD_FRAMECONFIG_SOF_Msk (0x1UL << NFCT_TXD_FRAMECONFIG_SOF_Pos) /*!< Bit mask of SOF field. */
+#define NFCT_TXD_FRAMECONFIG_SOF_NoSoF (0UL) /*!< Start of Frame symbol not added */
+#define NFCT_TXD_FRAMECONFIG_SOF_SoF (1UL) /*!< Start of Frame symbol added */
+
+/* Bit 1 : Discarding unused bits in start or at end of a Frame */
+#define NFCT_TXD_FRAMECONFIG_DISCARDMODE_Pos (1UL) /*!< Position of DISCARDMODE field. */
+#define NFCT_TXD_FRAMECONFIG_DISCARDMODE_Msk (0x1UL << NFCT_TXD_FRAMECONFIG_DISCARDMODE_Pos) /*!< Bit mask of DISCARDMODE field. */
+#define NFCT_TXD_FRAMECONFIG_DISCARDMODE_DiscardEnd (0UL) /*!< Unused bits is discarded at end of frame */
+#define NFCT_TXD_FRAMECONFIG_DISCARDMODE_DiscardStart (1UL) /*!< Unused bits is discarded at start of frame */
+
+/* Bit 0 : Adding parity or not in the frame */
+#define NFCT_TXD_FRAMECONFIG_PARITY_Pos (0UL) /*!< Position of PARITY field. */
+#define NFCT_TXD_FRAMECONFIG_PARITY_Msk (0x1UL << NFCT_TXD_FRAMECONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */
+#define NFCT_TXD_FRAMECONFIG_PARITY_NoParity (0UL) /*!< Parity is not added in TX frames */
+#define NFCT_TXD_FRAMECONFIG_PARITY_Parity (1UL) /*!< Parity is added TX frames */
+
+/* Register: NFCT_TXD_AMOUNT */
+/* Description: Size of outgoing frame */
+
+/* Bits 11..3 : Number of complete bytes that shall be included in the frame, excluding CRC, parity and framing */
+#define NFCT_TXD_AMOUNT_TXDATABYTES_Pos (3UL) /*!< Position of TXDATABYTES field. */
+#define NFCT_TXD_AMOUNT_TXDATABYTES_Msk (0x1FFUL << NFCT_TXD_AMOUNT_TXDATABYTES_Pos) /*!< Bit mask of TXDATABYTES field. */
+
+/* Bits 2..0 : Number of bits in the last or first byte read from RAM that shall be included in the frame (excluding parity bit). */
+#define NFCT_TXD_AMOUNT_TXDATABITS_Pos (0UL) /*!< Position of TXDATABITS field. */
+#define NFCT_TXD_AMOUNT_TXDATABITS_Msk (0x7UL << NFCT_TXD_AMOUNT_TXDATABITS_Pos) /*!< Bit mask of TXDATABITS field. */
+
+/* Register: NFCT_RXD_FRAMECONFIG */
+/* Description: Configuration of incoming frames */
+
+/* Bit 4 : CRC mode for incoming frames */
+#define NFCT_RXD_FRAMECONFIG_CRCMODERX_Pos (4UL) /*!< Position of CRCMODERX field. */
+#define NFCT_RXD_FRAMECONFIG_CRCMODERX_Msk (0x1UL << NFCT_RXD_FRAMECONFIG_CRCMODERX_Pos) /*!< Bit mask of CRCMODERX field. */
+#define NFCT_RXD_FRAMECONFIG_CRCMODERX_NoCRCRX (0UL) /*!< CRC is not expected in RX frames */
+#define NFCT_RXD_FRAMECONFIG_CRCMODERX_CRC16RX (1UL) /*!< Last 16 bits in RX frame is CRC, CRC is checked and CRCSTATUS updated */
+
+/* Bit 2 : SoF expected or not in RX frames */
+#define NFCT_RXD_FRAMECONFIG_SOF_Pos (2UL) /*!< Position of SOF field. */
+#define NFCT_RXD_FRAMECONFIG_SOF_Msk (0x1UL << NFCT_RXD_FRAMECONFIG_SOF_Pos) /*!< Bit mask of SOF field. */
+#define NFCT_RXD_FRAMECONFIG_SOF_NoSoF (0UL) /*!< Start of Frame symbol is not expected in RX frames */
+#define NFCT_RXD_FRAMECONFIG_SOF_SoF (1UL) /*!< Start of Frame symbol is expected in RX frames */
+
+/* Bit 0 : Parity expected or not in RX frame */
+#define NFCT_RXD_FRAMECONFIG_PARITY_Pos (0UL) /*!< Position of PARITY field. */
+#define NFCT_RXD_FRAMECONFIG_PARITY_Msk (0x1UL << NFCT_RXD_FRAMECONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */
+#define NFCT_RXD_FRAMECONFIG_PARITY_NoParity (0UL) /*!< Parity is not expected in RX frames */
+#define NFCT_RXD_FRAMECONFIG_PARITY_Parity (1UL) /*!< Parity is expected in RX frames */
+
+/* Register: NFCT_RXD_AMOUNT */
+/* Description: Size of last incoming frame */
+
+/* Bits 11..3 : Number of complete bytes received in the frame (including CRC, but excluding parity and SoF/EoF framing) */
+#define NFCT_RXD_AMOUNT_RXDATABYTES_Pos (3UL) /*!< Position of RXDATABYTES field. */
+#define NFCT_RXD_AMOUNT_RXDATABYTES_Msk (0x1FFUL << NFCT_RXD_AMOUNT_RXDATABYTES_Pos) /*!< Bit mask of RXDATABYTES field. */
+
+/* Bits 2..0 : Number of bits in the last byte in the frame, if less than 8 (including CRC, but excluding parity and SoF/EoF framing). */
+#define NFCT_RXD_AMOUNT_RXDATABITS_Pos (0UL) /*!< Position of RXDATABITS field. */
+#define NFCT_RXD_AMOUNT_RXDATABITS_Msk (0x7UL << NFCT_RXD_AMOUNT_RXDATABITS_Pos) /*!< Bit mask of RXDATABITS field. */
+
+/* Register: NFCT_NFCID1_LAST */
+/* Description: Last NFCID1 part (4, 7 or 10 bytes ID) */
+
+/* Bits 31..24 : NFCID1 byte W */
+#define NFCT_NFCID1_LAST_NFCID1_W_Pos (24UL) /*!< Position of NFCID1_W field. */
+#define NFCT_NFCID1_LAST_NFCID1_W_Msk (0xFFUL << NFCT_NFCID1_LAST_NFCID1_W_Pos) /*!< Bit mask of NFCID1_W field. */
+
+/* Bits 23..16 : NFCID1 byte X */
+#define NFCT_NFCID1_LAST_NFCID1_X_Pos (16UL) /*!< Position of NFCID1_X field. */
+#define NFCT_NFCID1_LAST_NFCID1_X_Msk (0xFFUL << NFCT_NFCID1_LAST_NFCID1_X_Pos) /*!< Bit mask of NFCID1_X field. */
+
+/* Bits 15..8 : NFCID1 byte Y */
+#define NFCT_NFCID1_LAST_NFCID1_Y_Pos (8UL) /*!< Position of NFCID1_Y field. */
+#define NFCT_NFCID1_LAST_NFCID1_Y_Msk (0xFFUL << NFCT_NFCID1_LAST_NFCID1_Y_Pos) /*!< Bit mask of NFCID1_Y field. */
+
+/* Bits 7..0 : NFCID1 byte Z (very last byte sent) */
+#define NFCT_NFCID1_LAST_NFCID1_Z_Pos (0UL) /*!< Position of NFCID1_Z field. */
+#define NFCT_NFCID1_LAST_NFCID1_Z_Msk (0xFFUL << NFCT_NFCID1_LAST_NFCID1_Z_Pos) /*!< Bit mask of NFCID1_Z field. */
+
+/* Register: NFCT_NFCID1_2ND_LAST */
+/* Description: Second last NFCID1 part (7 or 10 bytes ID) */
+
+/* Bits 23..16 : NFCID1 byte T */
+#define NFCT_NFCID1_2ND_LAST_NFCID1_T_Pos (16UL) /*!< Position of NFCID1_T field. */
+#define NFCT_NFCID1_2ND_LAST_NFCID1_T_Msk (0xFFUL << NFCT_NFCID1_2ND_LAST_NFCID1_T_Pos) /*!< Bit mask of NFCID1_T field. */
+
+/* Bits 15..8 : NFCID1 byte U */
+#define NFCT_NFCID1_2ND_LAST_NFCID1_U_Pos (8UL) /*!< Position of NFCID1_U field. */
+#define NFCT_NFCID1_2ND_LAST_NFCID1_U_Msk (0xFFUL << NFCT_NFCID1_2ND_LAST_NFCID1_U_Pos) /*!< Bit mask of NFCID1_U field. */
+
+/* Bits 7..0 : NFCID1 byte V */
+#define NFCT_NFCID1_2ND_LAST_NFCID1_V_Pos (0UL) /*!< Position of NFCID1_V field. */
+#define NFCT_NFCID1_2ND_LAST_NFCID1_V_Msk (0xFFUL << NFCT_NFCID1_2ND_LAST_NFCID1_V_Pos) /*!< Bit mask of NFCID1_V field. */
+
+/* Register: NFCT_NFCID1_3RD_LAST */
+/* Description: Third last NFCID1 part (10 bytes ID) */
+
+/* Bits 23..16 : NFCID1 byte Q */
+#define NFCT_NFCID1_3RD_LAST_NFCID1_Q_Pos (16UL) /*!< Position of NFCID1_Q field. */
+#define NFCT_NFCID1_3RD_LAST_NFCID1_Q_Msk (0xFFUL << NFCT_NFCID1_3RD_LAST_NFCID1_Q_Pos) /*!< Bit mask of NFCID1_Q field. */
+
+/* Bits 15..8 : NFCID1 byte R */
+#define NFCT_NFCID1_3RD_LAST_NFCID1_R_Pos (8UL) /*!< Position of NFCID1_R field. */
+#define NFCT_NFCID1_3RD_LAST_NFCID1_R_Msk (0xFFUL << NFCT_NFCID1_3RD_LAST_NFCID1_R_Pos) /*!< Bit mask of NFCID1_R field. */
+
+/* Bits 7..0 : NFCID1 byte S */
+#define NFCT_NFCID1_3RD_LAST_NFCID1_S_Pos (0UL) /*!< Position of NFCID1_S field. */
+#define NFCT_NFCID1_3RD_LAST_NFCID1_S_Msk (0xFFUL << NFCT_NFCID1_3RD_LAST_NFCID1_S_Pos) /*!< Bit mask of NFCID1_S field. */
+
+/* Register: NFCT_SENSRES */
+/* Description: NFC-A SENS_RES auto-response settings */
+
+/* Bits 15..12 : Reserved for future use. Shall be 0. */
+#define NFCT_SENSRES_RFU74_Pos (12UL) /*!< Position of RFU74 field. */
+#define NFCT_SENSRES_RFU74_Msk (0xFUL << NFCT_SENSRES_RFU74_Pos) /*!< Bit mask of RFU74 field. */
+
+/* Bits 11..8 : Tag platform configuration as defined by the b4:b1 of byte 2 in SENS_RES response in the NFC Forum, NFC Digital Protocol Technical Specification */
+#define NFCT_SENSRES_PLATFCONFIG_Pos (8UL) /*!< Position of PLATFCONFIG field. */
+#define NFCT_SENSRES_PLATFCONFIG_Msk (0xFUL << NFCT_SENSRES_PLATFCONFIG_Pos) /*!< Bit mask of PLATFCONFIG field. */
+
+/* Bits 7..6 : NFCID1 size. This value is used by the Auto collision resolution engine. */
+#define NFCT_SENSRES_NFCIDSIZE_Pos (6UL) /*!< Position of NFCIDSIZE field. */
+#define NFCT_SENSRES_NFCIDSIZE_Msk (0x3UL << NFCT_SENSRES_NFCIDSIZE_Pos) /*!< Bit mask of NFCIDSIZE field. */
+#define NFCT_SENSRES_NFCIDSIZE_NFCID1Single (0UL) /*!< NFCID1 size: single (4 bytes) */
+#define NFCT_SENSRES_NFCIDSIZE_NFCID1Double (1UL) /*!< NFCID1 size: double (7 bytes) */
+#define NFCT_SENSRES_NFCIDSIZE_NFCID1Triple (2UL) /*!< NFCID1 size: triple (10 bytes) */
+
+/* Bit 5 : Reserved for future use. Shall be 0. */
+#define NFCT_SENSRES_RFU5_Pos (5UL) /*!< Position of RFU5 field. */
+#define NFCT_SENSRES_RFU5_Msk (0x1UL << NFCT_SENSRES_RFU5_Pos) /*!< Bit mask of RFU5 field. */
+
+/* Bits 4..0 : Bit frame SDD as defined by the b5:b1 of byte 1 in SENS_RES response in the NFC Forum, NFC Digital Protocol Technical Specification */
+#define NFCT_SENSRES_BITFRAMESDD_Pos (0UL) /*!< Position of BITFRAMESDD field. */
+#define NFCT_SENSRES_BITFRAMESDD_Msk (0x1FUL << NFCT_SENSRES_BITFRAMESDD_Pos) /*!< Bit mask of BITFRAMESDD field. */
+#define NFCT_SENSRES_BITFRAMESDD_SDD00000 (0UL) /*!< SDD pattern 00000 */
+#define NFCT_SENSRES_BITFRAMESDD_SDD00001 (1UL) /*!< SDD pattern 00001 */
+#define NFCT_SENSRES_BITFRAMESDD_SDD00010 (2UL) /*!< SDD pattern 00010 */
+#define NFCT_SENSRES_BITFRAMESDD_SDD00100 (4UL) /*!< SDD pattern 00100 */
+#define NFCT_SENSRES_BITFRAMESDD_SDD01000 (8UL) /*!< SDD pattern 01000 */
+#define NFCT_SENSRES_BITFRAMESDD_SDD10000 (16UL) /*!< SDD pattern 10000 */
+
+/* Register: NFCT_SELRES */
+/* Description: NFC-A SEL_RES auto-response settings */
+
+/* Bit 7 : Reserved for future use. Shall be 0. */
+#define NFCT_SELRES_RFU7_Pos (7UL) /*!< Position of RFU7 field. */
+#define NFCT_SELRES_RFU7_Msk (0x1UL << NFCT_SELRES_RFU7_Pos) /*!< Bit mask of RFU7 field. */
+
+/* Bits 6..5 : Protocol as defined by the b7:b6 of SEL_RES response in the NFC Forum, NFC Digital Protocol Technical Specification */
+#define NFCT_SELRES_PROTOCOL_Pos (5UL) /*!< Position of PROTOCOL field. */
+#define NFCT_SELRES_PROTOCOL_Msk (0x3UL << NFCT_SELRES_PROTOCOL_Pos) /*!< Bit mask of PROTOCOL field. */
+
+/* Bits 4..3 : Reserved for future use. Shall be 0. */
+#define NFCT_SELRES_RFU43_Pos (3UL) /*!< Position of RFU43 field. */
+#define NFCT_SELRES_RFU43_Msk (0x3UL << NFCT_SELRES_RFU43_Pos) /*!< Bit mask of RFU43 field. */
+
+/* Bit 2 : Cascade bit (controlled by hardware, write has no effect) */
+#define NFCT_SELRES_CASCADE_Pos (2UL) /*!< Position of CASCADE field. */
+#define NFCT_SELRES_CASCADE_Msk (0x1UL << NFCT_SELRES_CASCADE_Pos) /*!< Bit mask of CASCADE field. */
+#define NFCT_SELRES_CASCADE_Complete (0UL) /*!< NFCID1 complete */
+#define NFCT_SELRES_CASCADE_NotComplete (1UL) /*!< NFCID1 not complete */
+
+/* Bits 1..0 : Reserved for future use. Shall be 0. */
+#define NFCT_SELRES_RFU10_Pos (0UL) /*!< Position of RFU10 field. */
+#define NFCT_SELRES_RFU10_Msk (0x3UL << NFCT_SELRES_RFU10_Pos) /*!< Bit mask of RFU10 field. */
+
+
+/* Peripheral: NVMC */
+/* Description: Non Volatile Memory Controller */
+
+/* Register: NVMC_READY */
+/* Description: Ready flag */
+
+/* Bit 0 : NVMC is ready or busy */
+#define NVMC_READY_READY_Pos (0UL) /*!< Position of READY field. */
+#define NVMC_READY_READY_Msk (0x1UL << NVMC_READY_READY_Pos) /*!< Bit mask of READY field. */
+#define NVMC_READY_READY_Busy (0UL) /*!< NVMC is busy (on-going write or erase operation) */
+#define NVMC_READY_READY_Ready (1UL) /*!< NVMC is ready */
+
+/* Register: NVMC_CONFIG */
+/* Description: Configuration register */
+
+/* Bits 1..0 : Program memory access mode. It is strongly recommended to only activate erase and write modes when they are actively used. Enabling write or erase will invalidate the cache and keep it invalidated. */
+#define NVMC_CONFIG_WEN_Pos (0UL) /*!< Position of WEN field. */
+#define NVMC_CONFIG_WEN_Msk (0x3UL << NVMC_CONFIG_WEN_Pos) /*!< Bit mask of WEN field. */
+#define NVMC_CONFIG_WEN_Ren (0UL) /*!< Read only access */
+#define NVMC_CONFIG_WEN_Wen (1UL) /*!< Write Enabled */
+#define NVMC_CONFIG_WEN_Een (2UL) /*!< Erase enabled */
+
+/* Register: NVMC_ERASEPAGE */
+/* Description: Register for erasing a page in Code area */
+
+/* Bits 31..0 : Register for starting erase of a page in Code area */
+#define NVMC_ERASEPAGE_ERASEPAGE_Pos (0UL) /*!< Position of ERASEPAGE field. */
+#define NVMC_ERASEPAGE_ERASEPAGE_Msk (0xFFFFFFFFUL << NVMC_ERASEPAGE_ERASEPAGE_Pos) /*!< Bit mask of ERASEPAGE field. */
+
+/* Register: NVMC_ERASEPCR1 */
+/* Description: Deprecated register - Register for erasing a page in Code area. Equivalent to ERASEPAGE. */
+
+/* Bits 31..0 : Register for erasing a page in Code area. Equivalent to ERASEPAGE. */
+#define NVMC_ERASEPCR1_ERASEPCR1_Pos (0UL) /*!< Position of ERASEPCR1 field. */
+#define NVMC_ERASEPCR1_ERASEPCR1_Msk (0xFFFFFFFFUL << NVMC_ERASEPCR1_ERASEPCR1_Pos) /*!< Bit mask of ERASEPCR1 field. */
+
+/* Register: NVMC_ERASEALL */
+/* Description: Register for erasing all non-volatile user memory */
+
+/* Bit 0 : Erase all non-volatile memory including UICR registers. Note that code erase has to be enabled by CONFIG.EEN before the UICR can be erased. */
+#define NVMC_ERASEALL_ERASEALL_Pos (0UL) /*!< Position of ERASEALL field. */
+#define NVMC_ERASEALL_ERASEALL_Msk (0x1UL << NVMC_ERASEALL_ERASEALL_Pos) /*!< Bit mask of ERASEALL field. */
+#define NVMC_ERASEALL_ERASEALL_NoOperation (0UL) /*!< No operation */
+#define NVMC_ERASEALL_ERASEALL_Erase (1UL) /*!< Start chip erase */
+
+/* Register: NVMC_ERASEPCR0 */
+/* Description: Deprecated register - Register for erasing a page in Code area. Equivalent to ERASEPAGE. */
+
+/* Bits 31..0 : Register for starting erase of a page in Code area. Equivalent to ERASEPAGE. */
+#define NVMC_ERASEPCR0_ERASEPCR0_Pos (0UL) /*!< Position of ERASEPCR0 field. */
+#define NVMC_ERASEPCR0_ERASEPCR0_Msk (0xFFFFFFFFUL << NVMC_ERASEPCR0_ERASEPCR0_Pos) /*!< Bit mask of ERASEPCR0 field. */
+
+/* Register: NVMC_ERASEUICR */
+/* Description: Register for erasing User Information Configuration Registers */
+
+/* Bit 0 : Register starting erase of all User Information Configuration Registers. Note that code erase has to be enabled by CONFIG.EEN before the UICR can be erased. */
+#define NVMC_ERASEUICR_ERASEUICR_Pos (0UL) /*!< Position of ERASEUICR field. */
+#define NVMC_ERASEUICR_ERASEUICR_Msk (0x1UL << NVMC_ERASEUICR_ERASEUICR_Pos) /*!< Bit mask of ERASEUICR field. */
+#define NVMC_ERASEUICR_ERASEUICR_NoOperation (0UL) /*!< No operation */
+#define NVMC_ERASEUICR_ERASEUICR_Erase (1UL) /*!< Start erase of UICR */
+
+/* Register: NVMC_ICACHECNF */
+/* Description: I-Code cache configuration register. */
+
+/* Bit 8 : Cache profiling enable */
+#define NVMC_ICACHECNF_CACHEPROFEN_Pos (8UL) /*!< Position of CACHEPROFEN field. */
+#define NVMC_ICACHECNF_CACHEPROFEN_Msk (0x1UL << NVMC_ICACHECNF_CACHEPROFEN_Pos) /*!< Bit mask of CACHEPROFEN field. */
+#define NVMC_ICACHECNF_CACHEPROFEN_Disabled (0UL) /*!< Disable cache profiling */
+#define NVMC_ICACHECNF_CACHEPROFEN_Enabled (1UL) /*!< Enable cache profiling */
+
+/* Bit 0 : Cache enable */
+#define NVMC_ICACHECNF_CACHEEN_Pos (0UL) /*!< Position of CACHEEN field. */
+#define NVMC_ICACHECNF_CACHEEN_Msk (0x1UL << NVMC_ICACHECNF_CACHEEN_Pos) /*!< Bit mask of CACHEEN field. */
+#define NVMC_ICACHECNF_CACHEEN_Disabled (0UL) /*!< Disable cache. Invalidates all cache entries. */
+#define NVMC_ICACHECNF_CACHEEN_Enabled (1UL) /*!< Enable cache */
+
+/* Register: NVMC_IHIT */
+/* Description: I-Code cache hit counter. */
+
+/* Bits 31..0 : Number of cache hits */
+#define NVMC_IHIT_HITS_Pos (0UL) /*!< Position of HITS field. */
+#define NVMC_IHIT_HITS_Msk (0xFFFFFFFFUL << NVMC_IHIT_HITS_Pos) /*!< Bit mask of HITS field. */
+
+/* Register: NVMC_IMISS */
+/* Description: I-Code cache miss counter. */
+
+/* Bits 31..0 : Number of cache misses */
+#define NVMC_IMISS_MISSES_Pos (0UL) /*!< Position of MISSES field. */
+#define NVMC_IMISS_MISSES_Msk (0xFFFFFFFFUL << NVMC_IMISS_MISSES_Pos) /*!< Bit mask of MISSES field. */
+
+
+/* Peripheral: GPIO */
+/* Description: GPIO Port 1 */
+
+/* Register: GPIO_OUT */
+/* Description: Write GPIO port */
+
+/* Bit 31 : P0.31 pin */
+#define GPIO_OUT_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_OUT_PIN31_Msk (0x1UL << GPIO_OUT_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high */
+
+/* Bit 30 : P0.30 pin */
+#define GPIO_OUT_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_OUT_PIN30_Msk (0x1UL << GPIO_OUT_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high */
+
+/* Bit 29 : P0.29 pin */
+#define GPIO_OUT_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_OUT_PIN29_Msk (0x1UL << GPIO_OUT_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high */
+
+/* Bit 28 : P0.28 pin */
+#define GPIO_OUT_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_OUT_PIN28_Msk (0x1UL << GPIO_OUT_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high */
+
+/* Bit 27 : P0.27 pin */
+#define GPIO_OUT_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_OUT_PIN27_Msk (0x1UL << GPIO_OUT_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high */
+
+/* Bit 26 : P0.26 pin */
+#define GPIO_OUT_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_OUT_PIN26_Msk (0x1UL << GPIO_OUT_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high */
+
+/* Bit 25 : P0.25 pin */
+#define GPIO_OUT_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_OUT_PIN25_Msk (0x1UL << GPIO_OUT_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high */
+
+/* Bit 24 : P0.24 pin */
+#define GPIO_OUT_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_OUT_PIN24_Msk (0x1UL << GPIO_OUT_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high */
+
+/* Bit 23 : P0.23 pin */
+#define GPIO_OUT_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_OUT_PIN23_Msk (0x1UL << GPIO_OUT_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high */
+
+/* Bit 22 : P0.22 pin */
+#define GPIO_OUT_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_OUT_PIN22_Msk (0x1UL << GPIO_OUT_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high */
+
+/* Bit 21 : P0.21 pin */
+#define GPIO_OUT_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_OUT_PIN21_Msk (0x1UL << GPIO_OUT_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high */
+
+/* Bit 20 : P0.20 pin */
+#define GPIO_OUT_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_OUT_PIN20_Msk (0x1UL << GPIO_OUT_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high */
+
+/* Bit 19 : P0.19 pin */
+#define GPIO_OUT_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_OUT_PIN19_Msk (0x1UL << GPIO_OUT_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high */
+
+/* Bit 18 : P0.18 pin */
+#define GPIO_OUT_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_OUT_PIN18_Msk (0x1UL << GPIO_OUT_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high */
+
+/* Bit 17 : P0.17 pin */
+#define GPIO_OUT_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_OUT_PIN17_Msk (0x1UL << GPIO_OUT_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high */
+
+/* Bit 16 : P0.16 pin */
+#define GPIO_OUT_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_OUT_PIN16_Msk (0x1UL << GPIO_OUT_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high */
+
+/* Bit 15 : P0.15 pin */
+#define GPIO_OUT_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_OUT_PIN15_Msk (0x1UL << GPIO_OUT_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high */
+
+/* Bit 14 : P0.14 pin */
+#define GPIO_OUT_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_OUT_PIN14_Msk (0x1UL << GPIO_OUT_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high */
+
+/* Bit 13 : P0.13 pin */
+#define GPIO_OUT_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_OUT_PIN13_Msk (0x1UL << GPIO_OUT_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high */
+
+/* Bit 12 : P0.12 pin */
+#define GPIO_OUT_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_OUT_PIN12_Msk (0x1UL << GPIO_OUT_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high */
+
+/* Bit 11 : P0.11 pin */
+#define GPIO_OUT_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_OUT_PIN11_Msk (0x1UL << GPIO_OUT_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high */
+
+/* Bit 10 : P0.10 pin */
+#define GPIO_OUT_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_OUT_PIN10_Msk (0x1UL << GPIO_OUT_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high */
+
+/* Bit 9 : P0.9 pin */
+#define GPIO_OUT_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_OUT_PIN9_Msk (0x1UL << GPIO_OUT_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high */
+
+/* Bit 8 : P0.8 pin */
+#define GPIO_OUT_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_OUT_PIN8_Msk (0x1UL << GPIO_OUT_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high */
+
+/* Bit 7 : P0.7 pin */
+#define GPIO_OUT_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_OUT_PIN7_Msk (0x1UL << GPIO_OUT_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high */
+
+/* Bit 6 : P0.6 pin */
+#define GPIO_OUT_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_OUT_PIN6_Msk (0x1UL << GPIO_OUT_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high */
+
+/* Bit 5 : P0.5 pin */
+#define GPIO_OUT_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_OUT_PIN5_Msk (0x1UL << GPIO_OUT_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high */
+
+/* Bit 4 : P0.4 pin */
+#define GPIO_OUT_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_OUT_PIN4_Msk (0x1UL << GPIO_OUT_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high */
+
+/* Bit 3 : P0.3 pin */
+#define GPIO_OUT_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_OUT_PIN3_Msk (0x1UL << GPIO_OUT_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high */
+
+/* Bit 2 : P0.2 pin */
+#define GPIO_OUT_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_OUT_PIN2_Msk (0x1UL << GPIO_OUT_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high */
+
+/* Bit 1 : P0.1 pin */
+#define GPIO_OUT_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_OUT_PIN1_Msk (0x1UL << GPIO_OUT_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high */
+
+/* Bit 0 : P0.0 pin */
+#define GPIO_OUT_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_OUT_PIN0_Msk (0x1UL << GPIO_OUT_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low */
+#define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high */
+
+/* Register: GPIO_OUTSET */
+/* Description: Set individual bits in GPIO port */
+
+/* Bit 31 : P0.31 pin */
+#define GPIO_OUTSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_OUTSET_PIN31_Msk (0x1UL << GPIO_OUTSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_OUTSET_PIN31_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN31_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN31_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 30 : P0.30 pin */
+#define GPIO_OUTSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_OUTSET_PIN30_Msk (0x1UL << GPIO_OUTSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_OUTSET_PIN30_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN30_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN30_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 29 : P0.29 pin */
+#define GPIO_OUTSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_OUTSET_PIN29_Msk (0x1UL << GPIO_OUTSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_OUTSET_PIN29_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN29_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN29_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 28 : P0.28 pin */
+#define GPIO_OUTSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_OUTSET_PIN28_Msk (0x1UL << GPIO_OUTSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_OUTSET_PIN28_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN28_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN28_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 27 : P0.27 pin */
+#define GPIO_OUTSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_OUTSET_PIN27_Msk (0x1UL << GPIO_OUTSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_OUTSET_PIN27_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN27_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN27_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 26 : P0.26 pin */
+#define GPIO_OUTSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_OUTSET_PIN26_Msk (0x1UL << GPIO_OUTSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_OUTSET_PIN26_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN26_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN26_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 25 : P0.25 pin */
+#define GPIO_OUTSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_OUTSET_PIN25_Msk (0x1UL << GPIO_OUTSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_OUTSET_PIN25_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN25_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN25_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 24 : P0.24 pin */
+#define GPIO_OUTSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_OUTSET_PIN24_Msk (0x1UL << GPIO_OUTSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_OUTSET_PIN24_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN24_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN24_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 23 : P0.23 pin */
+#define GPIO_OUTSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_OUTSET_PIN23_Msk (0x1UL << GPIO_OUTSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_OUTSET_PIN23_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN23_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN23_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 22 : P0.22 pin */
+#define GPIO_OUTSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_OUTSET_PIN22_Msk (0x1UL << GPIO_OUTSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_OUTSET_PIN22_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN22_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN22_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 21 : P0.21 pin */
+#define GPIO_OUTSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_OUTSET_PIN21_Msk (0x1UL << GPIO_OUTSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_OUTSET_PIN21_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN21_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN21_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 20 : P0.20 pin */
+#define GPIO_OUTSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_OUTSET_PIN20_Msk (0x1UL << GPIO_OUTSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_OUTSET_PIN20_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN20_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN20_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 19 : P0.19 pin */
+#define GPIO_OUTSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_OUTSET_PIN19_Msk (0x1UL << GPIO_OUTSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_OUTSET_PIN19_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN19_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN19_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 18 : P0.18 pin */
+#define GPIO_OUTSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_OUTSET_PIN18_Msk (0x1UL << GPIO_OUTSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_OUTSET_PIN18_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN18_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN18_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 17 : P0.17 pin */
+#define GPIO_OUTSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_OUTSET_PIN17_Msk (0x1UL << GPIO_OUTSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_OUTSET_PIN17_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN17_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN17_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 16 : P0.16 pin */
+#define GPIO_OUTSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_OUTSET_PIN16_Msk (0x1UL << GPIO_OUTSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_OUTSET_PIN16_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN16_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN16_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 15 : P0.15 pin */
+#define GPIO_OUTSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_OUTSET_PIN15_Msk (0x1UL << GPIO_OUTSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_OUTSET_PIN15_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN15_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN15_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 14 : P0.14 pin */
+#define GPIO_OUTSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_OUTSET_PIN14_Msk (0x1UL << GPIO_OUTSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_OUTSET_PIN14_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN14_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN14_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 13 : P0.13 pin */
+#define GPIO_OUTSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_OUTSET_PIN13_Msk (0x1UL << GPIO_OUTSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_OUTSET_PIN13_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN13_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN13_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 12 : P0.12 pin */
+#define GPIO_OUTSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_OUTSET_PIN12_Msk (0x1UL << GPIO_OUTSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_OUTSET_PIN12_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN12_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN12_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 11 : P0.11 pin */
+#define GPIO_OUTSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_OUTSET_PIN11_Msk (0x1UL << GPIO_OUTSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_OUTSET_PIN11_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN11_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN11_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 10 : P0.10 pin */
+#define GPIO_OUTSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_OUTSET_PIN10_Msk (0x1UL << GPIO_OUTSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_OUTSET_PIN10_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN10_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN10_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 9 : P0.9 pin */
+#define GPIO_OUTSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_OUTSET_PIN9_Msk (0x1UL << GPIO_OUTSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_OUTSET_PIN9_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN9_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN9_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 8 : P0.8 pin */
+#define GPIO_OUTSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_OUTSET_PIN8_Msk (0x1UL << GPIO_OUTSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_OUTSET_PIN8_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN8_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN8_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 7 : P0.7 pin */
+#define GPIO_OUTSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_OUTSET_PIN7_Msk (0x1UL << GPIO_OUTSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_OUTSET_PIN7_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN7_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN7_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 6 : P0.6 pin */
+#define GPIO_OUTSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_OUTSET_PIN6_Msk (0x1UL << GPIO_OUTSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_OUTSET_PIN6_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN6_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN6_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 5 : P0.5 pin */
+#define GPIO_OUTSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_OUTSET_PIN5_Msk (0x1UL << GPIO_OUTSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_OUTSET_PIN5_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN5_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN5_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 4 : P0.4 pin */
+#define GPIO_OUTSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_OUTSET_PIN4_Msk (0x1UL << GPIO_OUTSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_OUTSET_PIN4_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN4_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN4_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 3 : P0.3 pin */
+#define GPIO_OUTSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_OUTSET_PIN3_Msk (0x1UL << GPIO_OUTSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_OUTSET_PIN3_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN3_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN3_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 2 : P0.2 pin */
+#define GPIO_OUTSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_OUTSET_PIN2_Msk (0x1UL << GPIO_OUTSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_OUTSET_PIN2_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN2_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN2_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 1 : P0.1 pin */
+#define GPIO_OUTSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_OUTSET_PIN1_Msk (0x1UL << GPIO_OUTSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_OUTSET_PIN1_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN1_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN1_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Bit 0 : P0.0 pin */
+#define GPIO_OUTSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_OUTSET_PIN0_Msk (0x1UL << GPIO_OUTSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_OUTSET_PIN0_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTSET_PIN0_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTSET_PIN0_Set (1UL) /*!< Write: writing a '1' sets the pin high; writing a '0' has no effect */
+
+/* Register: GPIO_OUTCLR */
+/* Description: Clear individual bits in GPIO port */
+
+/* Bit 31 : P0.31 pin */
+#define GPIO_OUTCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_OUTCLR_PIN31_Msk (0x1UL << GPIO_OUTCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_OUTCLR_PIN31_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN31_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN31_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 30 : P0.30 pin */
+#define GPIO_OUTCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_OUTCLR_PIN30_Msk (0x1UL << GPIO_OUTCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_OUTCLR_PIN30_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN30_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN30_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 29 : P0.29 pin */
+#define GPIO_OUTCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_OUTCLR_PIN29_Msk (0x1UL << GPIO_OUTCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_OUTCLR_PIN29_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN29_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN29_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 28 : P0.28 pin */
+#define GPIO_OUTCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_OUTCLR_PIN28_Msk (0x1UL << GPIO_OUTCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_OUTCLR_PIN28_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN28_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN28_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 27 : P0.27 pin */
+#define GPIO_OUTCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_OUTCLR_PIN27_Msk (0x1UL << GPIO_OUTCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_OUTCLR_PIN27_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN27_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN27_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 26 : P0.26 pin */
+#define GPIO_OUTCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_OUTCLR_PIN26_Msk (0x1UL << GPIO_OUTCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_OUTCLR_PIN26_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN26_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN26_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 25 : P0.25 pin */
+#define GPIO_OUTCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_OUTCLR_PIN25_Msk (0x1UL << GPIO_OUTCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_OUTCLR_PIN25_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN25_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN25_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 24 : P0.24 pin */
+#define GPIO_OUTCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_OUTCLR_PIN24_Msk (0x1UL << GPIO_OUTCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_OUTCLR_PIN24_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN24_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN24_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 23 : P0.23 pin */
+#define GPIO_OUTCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_OUTCLR_PIN23_Msk (0x1UL << GPIO_OUTCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_OUTCLR_PIN23_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN23_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN23_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 22 : P0.22 pin */
+#define GPIO_OUTCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_OUTCLR_PIN22_Msk (0x1UL << GPIO_OUTCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_OUTCLR_PIN22_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN22_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN22_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 21 : P0.21 pin */
+#define GPIO_OUTCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_OUTCLR_PIN21_Msk (0x1UL << GPIO_OUTCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_OUTCLR_PIN21_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN21_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN21_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 20 : P0.20 pin */
+#define GPIO_OUTCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_OUTCLR_PIN20_Msk (0x1UL << GPIO_OUTCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_OUTCLR_PIN20_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN20_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN20_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 19 : P0.19 pin */
+#define GPIO_OUTCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_OUTCLR_PIN19_Msk (0x1UL << GPIO_OUTCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_OUTCLR_PIN19_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN19_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN19_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 18 : P0.18 pin */
+#define GPIO_OUTCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_OUTCLR_PIN18_Msk (0x1UL << GPIO_OUTCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_OUTCLR_PIN18_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN18_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN18_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 17 : P0.17 pin */
+#define GPIO_OUTCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_OUTCLR_PIN17_Msk (0x1UL << GPIO_OUTCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_OUTCLR_PIN17_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN17_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN17_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 16 : P0.16 pin */
+#define GPIO_OUTCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_OUTCLR_PIN16_Msk (0x1UL << GPIO_OUTCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_OUTCLR_PIN16_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN16_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN16_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 15 : P0.15 pin */
+#define GPIO_OUTCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_OUTCLR_PIN15_Msk (0x1UL << GPIO_OUTCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_OUTCLR_PIN15_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN15_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN15_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 14 : P0.14 pin */
+#define GPIO_OUTCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_OUTCLR_PIN14_Msk (0x1UL << GPIO_OUTCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_OUTCLR_PIN14_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN14_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN14_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 13 : P0.13 pin */
+#define GPIO_OUTCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_OUTCLR_PIN13_Msk (0x1UL << GPIO_OUTCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_OUTCLR_PIN13_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN13_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN13_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 12 : P0.12 pin */
+#define GPIO_OUTCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_OUTCLR_PIN12_Msk (0x1UL << GPIO_OUTCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_OUTCLR_PIN12_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN12_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN12_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 11 : P0.11 pin */
+#define GPIO_OUTCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_OUTCLR_PIN11_Msk (0x1UL << GPIO_OUTCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_OUTCLR_PIN11_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN11_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN11_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 10 : P0.10 pin */
+#define GPIO_OUTCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_OUTCLR_PIN10_Msk (0x1UL << GPIO_OUTCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_OUTCLR_PIN10_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN10_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN10_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 9 : P0.9 pin */
+#define GPIO_OUTCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_OUTCLR_PIN9_Msk (0x1UL << GPIO_OUTCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_OUTCLR_PIN9_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN9_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN9_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 8 : P0.8 pin */
+#define GPIO_OUTCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_OUTCLR_PIN8_Msk (0x1UL << GPIO_OUTCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_OUTCLR_PIN8_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN8_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN8_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 7 : P0.7 pin */
+#define GPIO_OUTCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_OUTCLR_PIN7_Msk (0x1UL << GPIO_OUTCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_OUTCLR_PIN7_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN7_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN7_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 6 : P0.6 pin */
+#define GPIO_OUTCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_OUTCLR_PIN6_Msk (0x1UL << GPIO_OUTCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_OUTCLR_PIN6_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN6_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN6_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 5 : P0.5 pin */
+#define GPIO_OUTCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_OUTCLR_PIN5_Msk (0x1UL << GPIO_OUTCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_OUTCLR_PIN5_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN5_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN5_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 4 : P0.4 pin */
+#define GPIO_OUTCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_OUTCLR_PIN4_Msk (0x1UL << GPIO_OUTCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_OUTCLR_PIN4_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN4_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN4_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 3 : P0.3 pin */
+#define GPIO_OUTCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_OUTCLR_PIN3_Msk (0x1UL << GPIO_OUTCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_OUTCLR_PIN3_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN3_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN3_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 2 : P0.2 pin */
+#define GPIO_OUTCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_OUTCLR_PIN2_Msk (0x1UL << GPIO_OUTCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_OUTCLR_PIN2_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN2_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN2_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 1 : P0.1 pin */
+#define GPIO_OUTCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_OUTCLR_PIN1_Msk (0x1UL << GPIO_OUTCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_OUTCLR_PIN1_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN1_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN1_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Bit 0 : P0.0 pin */
+#define GPIO_OUTCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_OUTCLR_PIN0_Msk (0x1UL << GPIO_OUTCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_OUTCLR_PIN0_Low (0UL) /*!< Read: pin driver is low */
+#define GPIO_OUTCLR_PIN0_High (1UL) /*!< Read: pin driver is high */
+#define GPIO_OUTCLR_PIN0_Clear (1UL) /*!< Write: writing a '1' sets the pin low; writing a '0' has no effect */
+
+/* Register: GPIO_IN */
+/* Description: Read GPIO port */
+
+/* Bit 31 : P0.31 pin */
+#define GPIO_IN_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_IN_PIN31_Msk (0x1UL << GPIO_IN_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high */
+
+/* Bit 30 : P0.30 pin */
+#define GPIO_IN_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_IN_PIN30_Msk (0x1UL << GPIO_IN_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high */
+
+/* Bit 29 : P0.29 pin */
+#define GPIO_IN_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_IN_PIN29_Msk (0x1UL << GPIO_IN_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high */
+
+/* Bit 28 : P0.28 pin */
+#define GPIO_IN_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_IN_PIN28_Msk (0x1UL << GPIO_IN_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high */
+
+/* Bit 27 : P0.27 pin */
+#define GPIO_IN_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_IN_PIN27_Msk (0x1UL << GPIO_IN_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high */
+
+/* Bit 26 : P0.26 pin */
+#define GPIO_IN_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_IN_PIN26_Msk (0x1UL << GPIO_IN_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high */
+
+/* Bit 25 : P0.25 pin */
+#define GPIO_IN_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_IN_PIN25_Msk (0x1UL << GPIO_IN_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high */
+
+/* Bit 24 : P0.24 pin */
+#define GPIO_IN_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_IN_PIN24_Msk (0x1UL << GPIO_IN_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high */
+
+/* Bit 23 : P0.23 pin */
+#define GPIO_IN_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_IN_PIN23_Msk (0x1UL << GPIO_IN_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high */
+
+/* Bit 22 : P0.22 pin */
+#define GPIO_IN_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_IN_PIN22_Msk (0x1UL << GPIO_IN_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high */
+
+/* Bit 21 : P0.21 pin */
+#define GPIO_IN_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_IN_PIN21_Msk (0x1UL << GPIO_IN_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high */
+
+/* Bit 20 : P0.20 pin */
+#define GPIO_IN_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_IN_PIN20_Msk (0x1UL << GPIO_IN_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high */
+
+/* Bit 19 : P0.19 pin */
+#define GPIO_IN_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_IN_PIN19_Msk (0x1UL << GPIO_IN_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high */
+
+/* Bit 18 : P0.18 pin */
+#define GPIO_IN_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_IN_PIN18_Msk (0x1UL << GPIO_IN_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high */
+
+/* Bit 17 : P0.17 pin */
+#define GPIO_IN_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_IN_PIN17_Msk (0x1UL << GPIO_IN_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high */
+
+/* Bit 16 : P0.16 pin */
+#define GPIO_IN_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_IN_PIN16_Msk (0x1UL << GPIO_IN_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high */
+
+/* Bit 15 : P0.15 pin */
+#define GPIO_IN_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_IN_PIN15_Msk (0x1UL << GPIO_IN_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high */
+
+/* Bit 14 : P0.14 pin */
+#define GPIO_IN_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_IN_PIN14_Msk (0x1UL << GPIO_IN_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high */
+
+/* Bit 13 : P0.13 pin */
+#define GPIO_IN_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_IN_PIN13_Msk (0x1UL << GPIO_IN_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high */
+
+/* Bit 12 : P0.12 pin */
+#define GPIO_IN_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_IN_PIN12_Msk (0x1UL << GPIO_IN_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high */
+
+/* Bit 11 : P0.11 pin */
+#define GPIO_IN_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_IN_PIN11_Msk (0x1UL << GPIO_IN_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high */
+
+/* Bit 10 : P0.10 pin */
+#define GPIO_IN_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_IN_PIN10_Msk (0x1UL << GPIO_IN_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high */
+
+/* Bit 9 : P0.9 pin */
+#define GPIO_IN_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_IN_PIN9_Msk (0x1UL << GPIO_IN_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high */
+
+/* Bit 8 : P0.8 pin */
+#define GPIO_IN_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_IN_PIN8_Msk (0x1UL << GPIO_IN_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high */
+
+/* Bit 7 : P0.7 pin */
+#define GPIO_IN_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_IN_PIN7_Msk (0x1UL << GPIO_IN_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high */
+
+/* Bit 6 : P0.6 pin */
+#define GPIO_IN_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_IN_PIN6_Msk (0x1UL << GPIO_IN_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high */
+
+/* Bit 5 : P0.5 pin */
+#define GPIO_IN_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_IN_PIN5_Msk (0x1UL << GPIO_IN_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high */
+
+/* Bit 4 : P0.4 pin */
+#define GPIO_IN_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_IN_PIN4_Msk (0x1UL << GPIO_IN_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high */
+
+/* Bit 3 : P0.3 pin */
+#define GPIO_IN_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_IN_PIN3_Msk (0x1UL << GPIO_IN_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high */
+
+/* Bit 2 : P0.2 pin */
+#define GPIO_IN_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_IN_PIN2_Msk (0x1UL << GPIO_IN_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high */
+
+/* Bit 1 : P0.1 pin */
+#define GPIO_IN_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_IN_PIN1_Msk (0x1UL << GPIO_IN_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high */
+
+/* Bit 0 : P0.0 pin */
+#define GPIO_IN_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_IN_PIN0_Msk (0x1UL << GPIO_IN_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low */
+#define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high */
+
+/* Register: GPIO_DIR */
+/* Description: Direction of GPIO pins */
+
+/* Bit 31 : P0.31 pin */
+#define GPIO_DIR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_DIR_PIN31_Msk (0x1UL << GPIO_DIR_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN31_Output (1UL) /*!< Pin set as output */
+
+/* Bit 30 : P0.30 pin */
+#define GPIO_DIR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_DIR_PIN30_Msk (0x1UL << GPIO_DIR_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN30_Output (1UL) /*!< Pin set as output */
+
+/* Bit 29 : P0.29 pin */
+#define GPIO_DIR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_DIR_PIN29_Msk (0x1UL << GPIO_DIR_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN29_Output (1UL) /*!< Pin set as output */
+
+/* Bit 28 : P0.28 pin */
+#define GPIO_DIR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_DIR_PIN28_Msk (0x1UL << GPIO_DIR_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN28_Output (1UL) /*!< Pin set as output */
+
+/* Bit 27 : P0.27 pin */
+#define GPIO_DIR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_DIR_PIN27_Msk (0x1UL << GPIO_DIR_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN27_Output (1UL) /*!< Pin set as output */
+
+/* Bit 26 : P0.26 pin */
+#define GPIO_DIR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_DIR_PIN26_Msk (0x1UL << GPIO_DIR_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN26_Output (1UL) /*!< Pin set as output */
+
+/* Bit 25 : P0.25 pin */
+#define GPIO_DIR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_DIR_PIN25_Msk (0x1UL << GPIO_DIR_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN25_Output (1UL) /*!< Pin set as output */
+
+/* Bit 24 : P0.24 pin */
+#define GPIO_DIR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_DIR_PIN24_Msk (0x1UL << GPIO_DIR_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN24_Output (1UL) /*!< Pin set as output */
+
+/* Bit 23 : P0.23 pin */
+#define GPIO_DIR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_DIR_PIN23_Msk (0x1UL << GPIO_DIR_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN23_Output (1UL) /*!< Pin set as output */
+
+/* Bit 22 : P0.22 pin */
+#define GPIO_DIR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_DIR_PIN22_Msk (0x1UL << GPIO_DIR_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN22_Output (1UL) /*!< Pin set as output */
+
+/* Bit 21 : P0.21 pin */
+#define GPIO_DIR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_DIR_PIN21_Msk (0x1UL << GPIO_DIR_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN21_Output (1UL) /*!< Pin set as output */
+
+/* Bit 20 : P0.20 pin */
+#define GPIO_DIR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_DIR_PIN20_Msk (0x1UL << GPIO_DIR_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN20_Output (1UL) /*!< Pin set as output */
+
+/* Bit 19 : P0.19 pin */
+#define GPIO_DIR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_DIR_PIN19_Msk (0x1UL << GPIO_DIR_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN19_Output (1UL) /*!< Pin set as output */
+
+/* Bit 18 : P0.18 pin */
+#define GPIO_DIR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_DIR_PIN18_Msk (0x1UL << GPIO_DIR_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN18_Output (1UL) /*!< Pin set as output */
+
+/* Bit 17 : P0.17 pin */
+#define GPIO_DIR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_DIR_PIN17_Msk (0x1UL << GPIO_DIR_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN17_Output (1UL) /*!< Pin set as output */
+
+/* Bit 16 : P0.16 pin */
+#define GPIO_DIR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_DIR_PIN16_Msk (0x1UL << GPIO_DIR_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN16_Output (1UL) /*!< Pin set as output */
+
+/* Bit 15 : P0.15 pin */
+#define GPIO_DIR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_DIR_PIN15_Msk (0x1UL << GPIO_DIR_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN15_Output (1UL) /*!< Pin set as output */
+
+/* Bit 14 : P0.14 pin */
+#define GPIO_DIR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_DIR_PIN14_Msk (0x1UL << GPIO_DIR_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN14_Output (1UL) /*!< Pin set as output */
+
+/* Bit 13 : P0.13 pin */
+#define GPIO_DIR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_DIR_PIN13_Msk (0x1UL << GPIO_DIR_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN13_Output (1UL) /*!< Pin set as output */
+
+/* Bit 12 : P0.12 pin */
+#define GPIO_DIR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_DIR_PIN12_Msk (0x1UL << GPIO_DIR_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN12_Output (1UL) /*!< Pin set as output */
+
+/* Bit 11 : P0.11 pin */
+#define GPIO_DIR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_DIR_PIN11_Msk (0x1UL << GPIO_DIR_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN11_Output (1UL) /*!< Pin set as output */
+
+/* Bit 10 : P0.10 pin */
+#define GPIO_DIR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_DIR_PIN10_Msk (0x1UL << GPIO_DIR_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN10_Output (1UL) /*!< Pin set as output */
+
+/* Bit 9 : P0.9 pin */
+#define GPIO_DIR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_DIR_PIN9_Msk (0x1UL << GPIO_DIR_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN9_Output (1UL) /*!< Pin set as output */
+
+/* Bit 8 : P0.8 pin */
+#define GPIO_DIR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_DIR_PIN8_Msk (0x1UL << GPIO_DIR_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN8_Output (1UL) /*!< Pin set as output */
+
+/* Bit 7 : P0.7 pin */
+#define GPIO_DIR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_DIR_PIN7_Msk (0x1UL << GPIO_DIR_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN7_Output (1UL) /*!< Pin set as output */
+
+/* Bit 6 : P0.6 pin */
+#define GPIO_DIR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_DIR_PIN6_Msk (0x1UL << GPIO_DIR_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN6_Output (1UL) /*!< Pin set as output */
+
+/* Bit 5 : P0.5 pin */
+#define GPIO_DIR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_DIR_PIN5_Msk (0x1UL << GPIO_DIR_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN5_Output (1UL) /*!< Pin set as output */
+
+/* Bit 4 : P0.4 pin */
+#define GPIO_DIR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_DIR_PIN4_Msk (0x1UL << GPIO_DIR_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN4_Output (1UL) /*!< Pin set as output */
+
+/* Bit 3 : P0.3 pin */
+#define GPIO_DIR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_DIR_PIN3_Msk (0x1UL << GPIO_DIR_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN3_Output (1UL) /*!< Pin set as output */
+
+/* Bit 2 : P0.2 pin */
+#define GPIO_DIR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_DIR_PIN2_Msk (0x1UL << GPIO_DIR_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN2_Output (1UL) /*!< Pin set as output */
+
+/* Bit 1 : P0.1 pin */
+#define GPIO_DIR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_DIR_PIN1_Msk (0x1UL << GPIO_DIR_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN1_Output (1UL) /*!< Pin set as output */
+
+/* Bit 0 : P0.0 pin */
+#define GPIO_DIR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_DIR_PIN0_Msk (0x1UL << GPIO_DIR_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input */
+#define GPIO_DIR_PIN0_Output (1UL) /*!< Pin set as output */
+
+/* Register: GPIO_DIRSET */
+/* Description: DIR set register */
+
+/* Bit 31 : Set as output pin 31 */
+#define GPIO_DIRSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_DIRSET_PIN31_Msk (0x1UL << GPIO_DIRSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_DIRSET_PIN31_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN31_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN31_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 30 : Set as output pin 30 */
+#define GPIO_DIRSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_DIRSET_PIN30_Msk (0x1UL << GPIO_DIRSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_DIRSET_PIN30_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN30_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN30_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 29 : Set as output pin 29 */
+#define GPIO_DIRSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_DIRSET_PIN29_Msk (0x1UL << GPIO_DIRSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_DIRSET_PIN29_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN29_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN29_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 28 : Set as output pin 28 */
+#define GPIO_DIRSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_DIRSET_PIN28_Msk (0x1UL << GPIO_DIRSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_DIRSET_PIN28_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN28_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN28_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 27 : Set as output pin 27 */
+#define GPIO_DIRSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_DIRSET_PIN27_Msk (0x1UL << GPIO_DIRSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_DIRSET_PIN27_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN27_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN27_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 26 : Set as output pin 26 */
+#define GPIO_DIRSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_DIRSET_PIN26_Msk (0x1UL << GPIO_DIRSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_DIRSET_PIN26_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN26_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN26_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 25 : Set as output pin 25 */
+#define GPIO_DIRSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_DIRSET_PIN25_Msk (0x1UL << GPIO_DIRSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_DIRSET_PIN25_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN25_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN25_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 24 : Set as output pin 24 */
+#define GPIO_DIRSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_DIRSET_PIN24_Msk (0x1UL << GPIO_DIRSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_DIRSET_PIN24_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN24_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN24_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 23 : Set as output pin 23 */
+#define GPIO_DIRSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_DIRSET_PIN23_Msk (0x1UL << GPIO_DIRSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_DIRSET_PIN23_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN23_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN23_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 22 : Set as output pin 22 */
+#define GPIO_DIRSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_DIRSET_PIN22_Msk (0x1UL << GPIO_DIRSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_DIRSET_PIN22_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN22_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN22_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 21 : Set as output pin 21 */
+#define GPIO_DIRSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_DIRSET_PIN21_Msk (0x1UL << GPIO_DIRSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_DIRSET_PIN21_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN21_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN21_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 20 : Set as output pin 20 */
+#define GPIO_DIRSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_DIRSET_PIN20_Msk (0x1UL << GPIO_DIRSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_DIRSET_PIN20_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN20_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN20_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 19 : Set as output pin 19 */
+#define GPIO_DIRSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_DIRSET_PIN19_Msk (0x1UL << GPIO_DIRSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_DIRSET_PIN19_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN19_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN19_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 18 : Set as output pin 18 */
+#define GPIO_DIRSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_DIRSET_PIN18_Msk (0x1UL << GPIO_DIRSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_DIRSET_PIN18_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN18_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN18_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 17 : Set as output pin 17 */
+#define GPIO_DIRSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_DIRSET_PIN17_Msk (0x1UL << GPIO_DIRSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_DIRSET_PIN17_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN17_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN17_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 16 : Set as output pin 16 */
+#define GPIO_DIRSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_DIRSET_PIN16_Msk (0x1UL << GPIO_DIRSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_DIRSET_PIN16_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN16_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN16_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 15 : Set as output pin 15 */
+#define GPIO_DIRSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_DIRSET_PIN15_Msk (0x1UL << GPIO_DIRSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_DIRSET_PIN15_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN15_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN15_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 14 : Set as output pin 14 */
+#define GPIO_DIRSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_DIRSET_PIN14_Msk (0x1UL << GPIO_DIRSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_DIRSET_PIN14_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN14_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN14_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 13 : Set as output pin 13 */
+#define GPIO_DIRSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_DIRSET_PIN13_Msk (0x1UL << GPIO_DIRSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_DIRSET_PIN13_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN13_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN13_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 12 : Set as output pin 12 */
+#define GPIO_DIRSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_DIRSET_PIN12_Msk (0x1UL << GPIO_DIRSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_DIRSET_PIN12_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN12_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN12_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 11 : Set as output pin 11 */
+#define GPIO_DIRSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_DIRSET_PIN11_Msk (0x1UL << GPIO_DIRSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_DIRSET_PIN11_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN11_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN11_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 10 : Set as output pin 10 */
+#define GPIO_DIRSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_DIRSET_PIN10_Msk (0x1UL << GPIO_DIRSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_DIRSET_PIN10_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN10_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN10_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 9 : Set as output pin 9 */
+#define GPIO_DIRSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_DIRSET_PIN9_Msk (0x1UL << GPIO_DIRSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_DIRSET_PIN9_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN9_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN9_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 8 : Set as output pin 8 */
+#define GPIO_DIRSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_DIRSET_PIN8_Msk (0x1UL << GPIO_DIRSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_DIRSET_PIN8_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN8_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN8_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 7 : Set as output pin 7 */
+#define GPIO_DIRSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_DIRSET_PIN7_Msk (0x1UL << GPIO_DIRSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_DIRSET_PIN7_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN7_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN7_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 6 : Set as output pin 6 */
+#define GPIO_DIRSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_DIRSET_PIN6_Msk (0x1UL << GPIO_DIRSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_DIRSET_PIN6_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN6_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN6_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 5 : Set as output pin 5 */
+#define GPIO_DIRSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_DIRSET_PIN5_Msk (0x1UL << GPIO_DIRSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_DIRSET_PIN5_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN5_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN5_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 4 : Set as output pin 4 */
+#define GPIO_DIRSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_DIRSET_PIN4_Msk (0x1UL << GPIO_DIRSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_DIRSET_PIN4_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN4_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN4_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 3 : Set as output pin 3 */
+#define GPIO_DIRSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_DIRSET_PIN3_Msk (0x1UL << GPIO_DIRSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_DIRSET_PIN3_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN3_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN3_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 2 : Set as output pin 2 */
+#define GPIO_DIRSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_DIRSET_PIN2_Msk (0x1UL << GPIO_DIRSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_DIRSET_PIN2_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN2_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN2_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 1 : Set as output pin 1 */
+#define GPIO_DIRSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_DIRSET_PIN1_Msk (0x1UL << GPIO_DIRSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_DIRSET_PIN1_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN1_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN1_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Bit 0 : Set as output pin 0 */
+#define GPIO_DIRSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_DIRSET_PIN0_Msk (0x1UL << GPIO_DIRSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_DIRSET_PIN0_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRSET_PIN0_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRSET_PIN0_Set (1UL) /*!< Write: writing a '1' sets pin to output; writing a '0' has no effect */
+
+/* Register: GPIO_DIRCLR */
+/* Description: DIR clear register */
+
+/* Bit 31 : Set as input pin 31 */
+#define GPIO_DIRCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_DIRCLR_PIN31_Msk (0x1UL << GPIO_DIRCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN31_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 30 : Set as input pin 30 */
+#define GPIO_DIRCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_DIRCLR_PIN30_Msk (0x1UL << GPIO_DIRCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN30_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 29 : Set as input pin 29 */
+#define GPIO_DIRCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_DIRCLR_PIN29_Msk (0x1UL << GPIO_DIRCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN29_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 28 : Set as input pin 28 */
+#define GPIO_DIRCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_DIRCLR_PIN28_Msk (0x1UL << GPIO_DIRCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN28_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 27 : Set as input pin 27 */
+#define GPIO_DIRCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_DIRCLR_PIN27_Msk (0x1UL << GPIO_DIRCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN27_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 26 : Set as input pin 26 */
+#define GPIO_DIRCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_DIRCLR_PIN26_Msk (0x1UL << GPIO_DIRCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN26_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 25 : Set as input pin 25 */
+#define GPIO_DIRCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_DIRCLR_PIN25_Msk (0x1UL << GPIO_DIRCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN25_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 24 : Set as input pin 24 */
+#define GPIO_DIRCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_DIRCLR_PIN24_Msk (0x1UL << GPIO_DIRCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN24_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 23 : Set as input pin 23 */
+#define GPIO_DIRCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_DIRCLR_PIN23_Msk (0x1UL << GPIO_DIRCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN23_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 22 : Set as input pin 22 */
+#define GPIO_DIRCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_DIRCLR_PIN22_Msk (0x1UL << GPIO_DIRCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN22_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 21 : Set as input pin 21 */
+#define GPIO_DIRCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_DIRCLR_PIN21_Msk (0x1UL << GPIO_DIRCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN21_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 20 : Set as input pin 20 */
+#define GPIO_DIRCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_DIRCLR_PIN20_Msk (0x1UL << GPIO_DIRCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN20_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 19 : Set as input pin 19 */
+#define GPIO_DIRCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_DIRCLR_PIN19_Msk (0x1UL << GPIO_DIRCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN19_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 18 : Set as input pin 18 */
+#define GPIO_DIRCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_DIRCLR_PIN18_Msk (0x1UL << GPIO_DIRCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN18_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 17 : Set as input pin 17 */
+#define GPIO_DIRCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_DIRCLR_PIN17_Msk (0x1UL << GPIO_DIRCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN17_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 16 : Set as input pin 16 */
+#define GPIO_DIRCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_DIRCLR_PIN16_Msk (0x1UL << GPIO_DIRCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN16_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 15 : Set as input pin 15 */
+#define GPIO_DIRCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_DIRCLR_PIN15_Msk (0x1UL << GPIO_DIRCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN15_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 14 : Set as input pin 14 */
+#define GPIO_DIRCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_DIRCLR_PIN14_Msk (0x1UL << GPIO_DIRCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN14_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 13 : Set as input pin 13 */
+#define GPIO_DIRCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_DIRCLR_PIN13_Msk (0x1UL << GPIO_DIRCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN13_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 12 : Set as input pin 12 */
+#define GPIO_DIRCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_DIRCLR_PIN12_Msk (0x1UL << GPIO_DIRCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN12_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 11 : Set as input pin 11 */
+#define GPIO_DIRCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_DIRCLR_PIN11_Msk (0x1UL << GPIO_DIRCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN11_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 10 : Set as input pin 10 */
+#define GPIO_DIRCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_DIRCLR_PIN10_Msk (0x1UL << GPIO_DIRCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN10_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 9 : Set as input pin 9 */
+#define GPIO_DIRCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_DIRCLR_PIN9_Msk (0x1UL << GPIO_DIRCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN9_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 8 : Set as input pin 8 */
+#define GPIO_DIRCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_DIRCLR_PIN8_Msk (0x1UL << GPIO_DIRCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN8_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 7 : Set as input pin 7 */
+#define GPIO_DIRCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_DIRCLR_PIN7_Msk (0x1UL << GPIO_DIRCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN7_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 6 : Set as input pin 6 */
+#define GPIO_DIRCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_DIRCLR_PIN6_Msk (0x1UL << GPIO_DIRCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN6_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 5 : Set as input pin 5 */
+#define GPIO_DIRCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_DIRCLR_PIN5_Msk (0x1UL << GPIO_DIRCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN5_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 4 : Set as input pin 4 */
+#define GPIO_DIRCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_DIRCLR_PIN4_Msk (0x1UL << GPIO_DIRCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN4_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 3 : Set as input pin 3 */
+#define GPIO_DIRCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_DIRCLR_PIN3_Msk (0x1UL << GPIO_DIRCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN3_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 2 : Set as input pin 2 */
+#define GPIO_DIRCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_DIRCLR_PIN2_Msk (0x1UL << GPIO_DIRCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN2_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 1 : Set as input pin 1 */
+#define GPIO_DIRCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_DIRCLR_PIN1_Msk (0x1UL << GPIO_DIRCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN1_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Bit 0 : Set as input pin 0 */
+#define GPIO_DIRCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_DIRCLR_PIN0_Msk (0x1UL << GPIO_DIRCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Read: pin set as input */
+#define GPIO_DIRCLR_PIN0_Output (1UL) /*!< Read: pin set as output */
+#define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Write: writing a '1' sets pin to input; writing a '0' has no effect */
+
+/* Register: GPIO_LATCH */
+/* Description: Latch register indicating what GPIO pins that have met the criteria set in the PIN_CNF[n].SENSE registers */
+
+/* Bit 31 : Status on whether PIN31 has met criteria set in PIN_CNF31.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_LATCH_PIN31_Msk (0x1UL << GPIO_LATCH_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_LATCH_PIN31_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN31_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 30 : Status on whether PIN30 has met criteria set in PIN_CNF30.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_LATCH_PIN30_Msk (0x1UL << GPIO_LATCH_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_LATCH_PIN30_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN30_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 29 : Status on whether PIN29 has met criteria set in PIN_CNF29.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_LATCH_PIN29_Msk (0x1UL << GPIO_LATCH_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_LATCH_PIN29_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN29_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 28 : Status on whether PIN28 has met criteria set in PIN_CNF28.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_LATCH_PIN28_Msk (0x1UL << GPIO_LATCH_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_LATCH_PIN28_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN28_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 27 : Status on whether PIN27 has met criteria set in PIN_CNF27.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_LATCH_PIN27_Msk (0x1UL << GPIO_LATCH_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_LATCH_PIN27_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN27_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 26 : Status on whether PIN26 has met criteria set in PIN_CNF26.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_LATCH_PIN26_Msk (0x1UL << GPIO_LATCH_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_LATCH_PIN26_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN26_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 25 : Status on whether PIN25 has met criteria set in PIN_CNF25.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_LATCH_PIN25_Msk (0x1UL << GPIO_LATCH_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_LATCH_PIN25_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN25_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 24 : Status on whether PIN24 has met criteria set in PIN_CNF24.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_LATCH_PIN24_Msk (0x1UL << GPIO_LATCH_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_LATCH_PIN24_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN24_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 23 : Status on whether PIN23 has met criteria set in PIN_CNF23.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_LATCH_PIN23_Msk (0x1UL << GPIO_LATCH_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_LATCH_PIN23_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN23_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 22 : Status on whether PIN22 has met criteria set in PIN_CNF22.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_LATCH_PIN22_Msk (0x1UL << GPIO_LATCH_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_LATCH_PIN22_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN22_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 21 : Status on whether PIN21 has met criteria set in PIN_CNF21.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_LATCH_PIN21_Msk (0x1UL << GPIO_LATCH_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_LATCH_PIN21_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN21_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 20 : Status on whether PIN20 has met criteria set in PIN_CNF20.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_LATCH_PIN20_Msk (0x1UL << GPIO_LATCH_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_LATCH_PIN20_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN20_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 19 : Status on whether PIN19 has met criteria set in PIN_CNF19.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_LATCH_PIN19_Msk (0x1UL << GPIO_LATCH_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_LATCH_PIN19_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN19_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 18 : Status on whether PIN18 has met criteria set in PIN_CNF18.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_LATCH_PIN18_Msk (0x1UL << GPIO_LATCH_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_LATCH_PIN18_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN18_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 17 : Status on whether PIN17 has met criteria set in PIN_CNF17.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_LATCH_PIN17_Msk (0x1UL << GPIO_LATCH_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_LATCH_PIN17_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN17_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 16 : Status on whether PIN16 has met criteria set in PIN_CNF16.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_LATCH_PIN16_Msk (0x1UL << GPIO_LATCH_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_LATCH_PIN16_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN16_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 15 : Status on whether PIN15 has met criteria set in PIN_CNF15.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_LATCH_PIN15_Msk (0x1UL << GPIO_LATCH_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_LATCH_PIN15_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN15_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 14 : Status on whether PIN14 has met criteria set in PIN_CNF14.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_LATCH_PIN14_Msk (0x1UL << GPIO_LATCH_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_LATCH_PIN14_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN14_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 13 : Status on whether PIN13 has met criteria set in PIN_CNF13.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_LATCH_PIN13_Msk (0x1UL << GPIO_LATCH_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_LATCH_PIN13_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN13_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 12 : Status on whether PIN12 has met criteria set in PIN_CNF12.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_LATCH_PIN12_Msk (0x1UL << GPIO_LATCH_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_LATCH_PIN12_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN12_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 11 : Status on whether PIN11 has met criteria set in PIN_CNF11.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_LATCH_PIN11_Msk (0x1UL << GPIO_LATCH_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_LATCH_PIN11_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN11_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 10 : Status on whether PIN10 has met criteria set in PIN_CNF10.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_LATCH_PIN10_Msk (0x1UL << GPIO_LATCH_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_LATCH_PIN10_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN10_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 9 : Status on whether PIN9 has met criteria set in PIN_CNF9.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_LATCH_PIN9_Msk (0x1UL << GPIO_LATCH_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_LATCH_PIN9_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN9_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 8 : Status on whether PIN8 has met criteria set in PIN_CNF8.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_LATCH_PIN8_Msk (0x1UL << GPIO_LATCH_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_LATCH_PIN8_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN8_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 7 : Status on whether PIN7 has met criteria set in PIN_CNF7.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_LATCH_PIN7_Msk (0x1UL << GPIO_LATCH_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_LATCH_PIN7_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN7_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 6 : Status on whether PIN6 has met criteria set in PIN_CNF6.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_LATCH_PIN6_Msk (0x1UL << GPIO_LATCH_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_LATCH_PIN6_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN6_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 5 : Status on whether PIN5 has met criteria set in PIN_CNF5.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_LATCH_PIN5_Msk (0x1UL << GPIO_LATCH_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_LATCH_PIN5_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN5_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 4 : Status on whether PIN4 has met criteria set in PIN_CNF4.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_LATCH_PIN4_Msk (0x1UL << GPIO_LATCH_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_LATCH_PIN4_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN4_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 3 : Status on whether PIN3 has met criteria set in PIN_CNF3.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_LATCH_PIN3_Msk (0x1UL << GPIO_LATCH_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_LATCH_PIN3_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN3_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 2 : Status on whether PIN2 has met criteria set in PIN_CNF2.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_LATCH_PIN2_Msk (0x1UL << GPIO_LATCH_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_LATCH_PIN2_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN2_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 1 : Status on whether PIN1 has met criteria set in PIN_CNF1.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_LATCH_PIN1_Msk (0x1UL << GPIO_LATCH_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_LATCH_PIN1_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN1_Latched (1UL) /*!< Criteria has been met */
+
+/* Bit 0 : Status on whether PIN0 has met criteria set in PIN_CNF0.SENSE register. Write '1' to clear. */
+#define GPIO_LATCH_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_LATCH_PIN0_Msk (0x1UL << GPIO_LATCH_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_LATCH_PIN0_NotLatched (0UL) /*!< Criteria has not been met */
+#define GPIO_LATCH_PIN0_Latched (1UL) /*!< Criteria has been met */
+
+/* Register: GPIO_DETECTMODE */
+/* Description: Select between default DETECT signal behaviour and LDETECT mode */
+
+/* Bit 0 : Select between default DETECT signal behaviour and LDETECT mode */
+#define GPIO_DETECTMODE_DETECTMODE_Pos (0UL) /*!< Position of DETECTMODE field. */
+#define GPIO_DETECTMODE_DETECTMODE_Msk (0x1UL << GPIO_DETECTMODE_DETECTMODE_Pos) /*!< Bit mask of DETECTMODE field. */
+#define GPIO_DETECTMODE_DETECTMODE_Default (0UL) /*!< DETECT directly connected to PIN DETECT signals */
+#define GPIO_DETECTMODE_DETECTMODE_LDETECT (1UL) /*!< Use the latched LDETECT behaviour */
+
+/* Register: GPIO_PIN_CNF */
+/* Description: Description collection[0]: Configuration of GPIO pins */
+
+/* Bits 17..16 : Pin sensing mechanism */
+#define GPIO_PIN_CNF_SENSE_Pos (16UL) /*!< Position of SENSE field. */
+#define GPIO_PIN_CNF_SENSE_Msk (0x3UL << GPIO_PIN_CNF_SENSE_Pos) /*!< Bit mask of SENSE field. */
+#define GPIO_PIN_CNF_SENSE_Disabled (0UL) /*!< Disabled */
+#define GPIO_PIN_CNF_SENSE_High (2UL) /*!< Sense for high level */
+#define GPIO_PIN_CNF_SENSE_Low (3UL) /*!< Sense for low level */
+
+/* Bits 10..8 : Drive configuration */
+#define GPIO_PIN_CNF_DRIVE_Pos (8UL) /*!< Position of DRIVE field. */
+#define GPIO_PIN_CNF_DRIVE_Msk (0x7UL << GPIO_PIN_CNF_DRIVE_Pos) /*!< Bit mask of DRIVE field. */
+#define GPIO_PIN_CNF_DRIVE_S0S1 (0UL) /*!< Standard '0', standard '1' */
+#define GPIO_PIN_CNF_DRIVE_H0S1 (1UL) /*!< High drive '0', standard '1' */
+#define GPIO_PIN_CNF_DRIVE_S0H1 (2UL) /*!< Standard '0', high drive '1' */
+#define GPIO_PIN_CNF_DRIVE_H0H1 (3UL) /*!< High drive '0', high 'drive '1'' */
+#define GPIO_PIN_CNF_DRIVE_D0S1 (4UL) /*!< Disconnect '0' standard '1' (normally used for wired-or connections) */
+#define GPIO_PIN_CNF_DRIVE_D0H1 (5UL) /*!< Disconnect '0', high drive '1' (normally used for wired-or connections) */
+#define GPIO_PIN_CNF_DRIVE_S0D1 (6UL) /*!< Standard '0'. disconnect '1' (normally used for wired-and connections) */
+#define GPIO_PIN_CNF_DRIVE_H0D1 (7UL) /*!< High drive '0', disconnect '1' (normally used for wired-and connections) */
+
+/* Bits 3..2 : Pull configuration */
+#define GPIO_PIN_CNF_PULL_Pos (2UL) /*!< Position of PULL field. */
+#define GPIO_PIN_CNF_PULL_Msk (0x3UL << GPIO_PIN_CNF_PULL_Pos) /*!< Bit mask of PULL field. */
+#define GPIO_PIN_CNF_PULL_Disabled (0UL) /*!< No pull */
+#define GPIO_PIN_CNF_PULL_Pulldown (1UL) /*!< Pull down on pin */
+#define GPIO_PIN_CNF_PULL_Pullup (3UL) /*!< Pull up on pin */
+
+/* Bit 1 : Connect or disconnect input buffer */
+#define GPIO_PIN_CNF_INPUT_Pos (1UL) /*!< Position of INPUT field. */
+#define GPIO_PIN_CNF_INPUT_Msk (0x1UL << GPIO_PIN_CNF_INPUT_Pos) /*!< Bit mask of INPUT field. */
+#define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input buffer */
+#define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input buffer */
+
+/* Bit 0 : Pin direction. Same physical register as DIR register */
+#define GPIO_PIN_CNF_DIR_Pos (0UL) /*!< Position of DIR field. */
+#define GPIO_PIN_CNF_DIR_Msk (0x1UL << GPIO_PIN_CNF_DIR_Pos) /*!< Bit mask of DIR field. */
+#define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin */
+#define GPIO_PIN_CNF_DIR_Output (1UL) /*!< Configure pin as an output pin */
+
+
+/* Peripheral: PDM */
+/* Description: Pulse Density Modulation (Digital Microphone) Interface */
+
+/* Register: PDM_INTEN */
+/* Description: Enable or disable interrupt */
+
+/* Bit 2 : Enable or disable interrupt for END event */
+#define PDM_INTEN_END_Pos (2UL) /*!< Position of END field. */
+#define PDM_INTEN_END_Msk (0x1UL << PDM_INTEN_END_Pos) /*!< Bit mask of END field. */
+#define PDM_INTEN_END_Disabled (0UL) /*!< Disable */
+#define PDM_INTEN_END_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable interrupt for STOPPED event */
+#define PDM_INTEN_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define PDM_INTEN_STOPPED_Msk (0x1UL << PDM_INTEN_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define PDM_INTEN_STOPPED_Disabled (0UL) /*!< Disable */
+#define PDM_INTEN_STOPPED_Enabled (1UL) /*!< Enable */
+
+/* Bit 0 : Enable or disable interrupt for STARTED event */
+#define PDM_INTEN_STARTED_Pos (0UL) /*!< Position of STARTED field. */
+#define PDM_INTEN_STARTED_Msk (0x1UL << PDM_INTEN_STARTED_Pos) /*!< Bit mask of STARTED field. */
+#define PDM_INTEN_STARTED_Disabled (0UL) /*!< Disable */
+#define PDM_INTEN_STARTED_Enabled (1UL) /*!< Enable */
+
+/* Register: PDM_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 2 : Write '1' to Enable interrupt for END event */
+#define PDM_INTENSET_END_Pos (2UL) /*!< Position of END field. */
+#define PDM_INTENSET_END_Msk (0x1UL << PDM_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define PDM_INTENSET_END_Disabled (0UL) /*!< Read: Disabled */
+#define PDM_INTENSET_END_Enabled (1UL) /*!< Read: Enabled */
+#define PDM_INTENSET_END_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for STOPPED event */
+#define PDM_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define PDM_INTENSET_STOPPED_Msk (0x1UL << PDM_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define PDM_INTENSET_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define PDM_INTENSET_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define PDM_INTENSET_STOPPED_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for STARTED event */
+#define PDM_INTENSET_STARTED_Pos (0UL) /*!< Position of STARTED field. */
+#define PDM_INTENSET_STARTED_Msk (0x1UL << PDM_INTENSET_STARTED_Pos) /*!< Bit mask of STARTED field. */
+#define PDM_INTENSET_STARTED_Disabled (0UL) /*!< Read: Disabled */
+#define PDM_INTENSET_STARTED_Enabled (1UL) /*!< Read: Enabled */
+#define PDM_INTENSET_STARTED_Set (1UL) /*!< Enable */
+
+/* Register: PDM_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 2 : Write '1' to Disable interrupt for END event */
+#define PDM_INTENCLR_END_Pos (2UL) /*!< Position of END field. */
+#define PDM_INTENCLR_END_Msk (0x1UL << PDM_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define PDM_INTENCLR_END_Disabled (0UL) /*!< Read: Disabled */
+#define PDM_INTENCLR_END_Enabled (1UL) /*!< Read: Enabled */
+#define PDM_INTENCLR_END_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for STOPPED event */
+#define PDM_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define PDM_INTENCLR_STOPPED_Msk (0x1UL << PDM_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define PDM_INTENCLR_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define PDM_INTENCLR_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define PDM_INTENCLR_STOPPED_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for STARTED event */
+#define PDM_INTENCLR_STARTED_Pos (0UL) /*!< Position of STARTED field. */
+#define PDM_INTENCLR_STARTED_Msk (0x1UL << PDM_INTENCLR_STARTED_Pos) /*!< Bit mask of STARTED field. */
+#define PDM_INTENCLR_STARTED_Disabled (0UL) /*!< Read: Disabled */
+#define PDM_INTENCLR_STARTED_Enabled (1UL) /*!< Read: Enabled */
+#define PDM_INTENCLR_STARTED_Clear (1UL) /*!< Disable */
+
+/* Register: PDM_ENABLE */
+/* Description: PDM module enable register */
+
+/* Bit 0 : Enable or disable PDM module */
+#define PDM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define PDM_ENABLE_ENABLE_Msk (0x1UL << PDM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define PDM_ENABLE_ENABLE_Disabled (0UL) /*!< Disable */
+#define PDM_ENABLE_ENABLE_Enabled (1UL) /*!< Enable */
+
+/* Register: PDM_PDMCLKCTRL */
+/* Description: PDM clock generator control */
+
+/* Bits 31..0 : PDM_CLK frequency */
+#define PDM_PDMCLKCTRL_FREQ_Pos (0UL) /*!< Position of FREQ field. */
+#define PDM_PDMCLKCTRL_FREQ_Msk (0xFFFFFFFFUL << PDM_PDMCLKCTRL_FREQ_Pos) /*!< Bit mask of FREQ field. */
+#define PDM_PDMCLKCTRL_FREQ_1000K (0x08000000UL) /*!< PDM_CLK = 32 MHz / 32 = 1.000 MHz */
+#define PDM_PDMCLKCTRL_FREQ_Default (0x08400000UL) /*!< PDM_CLK = 32 MHz / 31 = 1.032 MHz */
+#define PDM_PDMCLKCTRL_FREQ_1067K (0x08800000UL) /*!< PDM_CLK = 32 MHz / 30 = 1.067 MHz */
+
+/* Register: PDM_MODE */
+/* Description: Defines the routing of the connected PDM microphones' signals */
+
+/* Bit 1 : Defines on which PDM_CLK edge Left (or mono) is sampled */
+#define PDM_MODE_EDGE_Pos (1UL) /*!< Position of EDGE field. */
+#define PDM_MODE_EDGE_Msk (0x1UL << PDM_MODE_EDGE_Pos) /*!< Bit mask of EDGE field. */
+#define PDM_MODE_EDGE_LeftFalling (0UL) /*!< Left (or mono) is sampled on falling edge of PDM_CLK */
+#define PDM_MODE_EDGE_LeftRising (1UL) /*!< Left (or mono) is sampled on rising edge of PDM_CLK */
+
+/* Bit 0 : Mono or stereo operation */
+#define PDM_MODE_OPERATION_Pos (0UL) /*!< Position of OPERATION field. */
+#define PDM_MODE_OPERATION_Msk (0x1UL << PDM_MODE_OPERATION_Pos) /*!< Bit mask of OPERATION field. */
+#define PDM_MODE_OPERATION_Stereo (0UL) /*!< Sample and store one pair (Left + Right) of 16bit samples per RAM word R=[31:16]; L=[15:0] */
+#define PDM_MODE_OPERATION_Mono (1UL) /*!< Sample and store two successive Left samples (16 bit each) per RAM word L1=[31:16]; L0=[15:0] */
+
+/* Register: PDM_GAINL */
+/* Description: Left output gain adjustment */
+
+/* Bits 6..0 : Left output gain adjustment, in 0.5 dB steps, around the default module gain (see electrical parameters) 0x00 -20 dB gain adjust 0x01 -19.5 dB gain adjust (...) 0x27 -0.5 dB gain adjust 0x28 0 dB gain adjust 0x29 +0.5 dB gain adjust (...) 0x4F +19.5 dB gain adjust 0x50 +20 dB gain adjust */
+#define PDM_GAINL_GAINL_Pos (0UL) /*!< Position of GAINL field. */
+#define PDM_GAINL_GAINL_Msk (0x7FUL << PDM_GAINL_GAINL_Pos) /*!< Bit mask of GAINL field. */
+#define PDM_GAINL_GAINL_MinGain (0x00UL) /*!< -20dB gain adjustment (minimum) */
+#define PDM_GAINL_GAINL_DefaultGain (0x28UL) /*!< 0dB gain adjustment ('2500 RMS' requirement) */
+#define PDM_GAINL_GAINL_MaxGain (0x50UL) /*!< +20dB gain adjustment (maximum) */
+
+/* Register: PDM_GAINR */
+/* Description: Right output gain adjustment */
+
+/* Bits 7..0 : Right output gain adjustment, in 0.5 dB steps, around the default module gain (see electrical parameters) */
+#define PDM_GAINR_GAINR_Pos (0UL) /*!< Position of GAINR field. */
+#define PDM_GAINR_GAINR_Msk (0xFFUL << PDM_GAINR_GAINR_Pos) /*!< Bit mask of GAINR field. */
+#define PDM_GAINR_GAINR_MinGain (0x00UL) /*!< -20dB gain adjustment (minimum) */
+#define PDM_GAINR_GAINR_DefaultGain (0x28UL) /*!< 0dB gain adjustment ('2500 RMS' requirement) */
+#define PDM_GAINR_GAINR_MaxGain (0x50UL) /*!< +20dB gain adjustment (maximum) */
+
+/* Register: PDM_PSEL_CLK */
+/* Description: Pin number configuration for PDM CLK signal */
+
+/* Bit 31 : Connection */
+#define PDM_PSEL_CLK_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define PDM_PSEL_CLK_CONNECT_Msk (0x1UL << PDM_PSEL_CLK_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define PDM_PSEL_CLK_CONNECT_Connected (0UL) /*!< Connect */
+#define PDM_PSEL_CLK_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define PDM_PSEL_CLK_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define PDM_PSEL_CLK_PIN_Msk (0x1FUL << PDM_PSEL_CLK_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: PDM_PSEL_DIN */
+/* Description: Pin number configuration for PDM DIN signal */
+
+/* Bit 31 : Connection */
+#define PDM_PSEL_DIN_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define PDM_PSEL_DIN_CONNECT_Msk (0x1UL << PDM_PSEL_DIN_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define PDM_PSEL_DIN_CONNECT_Connected (0UL) /*!< Connect */
+#define PDM_PSEL_DIN_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define PDM_PSEL_DIN_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define PDM_PSEL_DIN_PIN_Msk (0x1FUL << PDM_PSEL_DIN_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: PDM_SAMPLE_PTR */
+/* Description: RAM address pointer to write samples to with EasyDMA */
+
+/* Bits 31..0 : Address to write PDM samples to over DMA */
+#define PDM_SAMPLE_PTR_SAMPLEPTR_Pos (0UL) /*!< Position of SAMPLEPTR field. */
+#define PDM_SAMPLE_PTR_SAMPLEPTR_Msk (0xFFFFFFFFUL << PDM_SAMPLE_PTR_SAMPLEPTR_Pos) /*!< Bit mask of SAMPLEPTR field. */
+
+/* Register: PDM_SAMPLE_MAXCNT */
+/* Description: Number of samples to allocate memory for in EasyDMA mode */
+
+/* Bits 14..0 : Length of DMA RAM allocation in number of samples */
+#define PDM_SAMPLE_MAXCNT_BUFFSIZE_Pos (0UL) /*!< Position of BUFFSIZE field. */
+#define PDM_SAMPLE_MAXCNT_BUFFSIZE_Msk (0x7FFFUL << PDM_SAMPLE_MAXCNT_BUFFSIZE_Pos) /*!< Bit mask of BUFFSIZE field. */
+
+
+/* Peripheral: POWER */
+/* Description: Power control */
+
+/* Register: POWER_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 6 : Write '1' to Enable interrupt for SLEEPEXIT event */
+#define POWER_INTENSET_SLEEPEXIT_Pos (6UL) /*!< Position of SLEEPEXIT field. */
+#define POWER_INTENSET_SLEEPEXIT_Msk (0x1UL << POWER_INTENSET_SLEEPEXIT_Pos) /*!< Bit mask of SLEEPEXIT field. */
+#define POWER_INTENSET_SLEEPEXIT_Disabled (0UL) /*!< Read: Disabled */
+#define POWER_INTENSET_SLEEPEXIT_Enabled (1UL) /*!< Read: Enabled */
+#define POWER_INTENSET_SLEEPEXIT_Set (1UL) /*!< Enable */
+
+/* Bit 5 : Write '1' to Enable interrupt for SLEEPENTER event */
+#define POWER_INTENSET_SLEEPENTER_Pos (5UL) /*!< Position of SLEEPENTER field. */
+#define POWER_INTENSET_SLEEPENTER_Msk (0x1UL << POWER_INTENSET_SLEEPENTER_Pos) /*!< Bit mask of SLEEPENTER field. */
+#define POWER_INTENSET_SLEEPENTER_Disabled (0UL) /*!< Read: Disabled */
+#define POWER_INTENSET_SLEEPENTER_Enabled (1UL) /*!< Read: Enabled */
+#define POWER_INTENSET_SLEEPENTER_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for POFWARN event */
+#define POWER_INTENSET_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */
+#define POWER_INTENSET_POFWARN_Msk (0x1UL << POWER_INTENSET_POFWARN_Pos) /*!< Bit mask of POFWARN field. */
+#define POWER_INTENSET_POFWARN_Disabled (0UL) /*!< Read: Disabled */
+#define POWER_INTENSET_POFWARN_Enabled (1UL) /*!< Read: Enabled */
+#define POWER_INTENSET_POFWARN_Set (1UL) /*!< Enable */
+
+/* Register: POWER_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 6 : Write '1' to Disable interrupt for SLEEPEXIT event */
+#define POWER_INTENCLR_SLEEPEXIT_Pos (6UL) /*!< Position of SLEEPEXIT field. */
+#define POWER_INTENCLR_SLEEPEXIT_Msk (0x1UL << POWER_INTENCLR_SLEEPEXIT_Pos) /*!< Bit mask of SLEEPEXIT field. */
+#define POWER_INTENCLR_SLEEPEXIT_Disabled (0UL) /*!< Read: Disabled */
+#define POWER_INTENCLR_SLEEPEXIT_Enabled (1UL) /*!< Read: Enabled */
+#define POWER_INTENCLR_SLEEPEXIT_Clear (1UL) /*!< Disable */
+
+/* Bit 5 : Write '1' to Disable interrupt for SLEEPENTER event */
+#define POWER_INTENCLR_SLEEPENTER_Pos (5UL) /*!< Position of SLEEPENTER field. */
+#define POWER_INTENCLR_SLEEPENTER_Msk (0x1UL << POWER_INTENCLR_SLEEPENTER_Pos) /*!< Bit mask of SLEEPENTER field. */
+#define POWER_INTENCLR_SLEEPENTER_Disabled (0UL) /*!< Read: Disabled */
+#define POWER_INTENCLR_SLEEPENTER_Enabled (1UL) /*!< Read: Enabled */
+#define POWER_INTENCLR_SLEEPENTER_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for POFWARN event */
+#define POWER_INTENCLR_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */
+#define POWER_INTENCLR_POFWARN_Msk (0x1UL << POWER_INTENCLR_POFWARN_Pos) /*!< Bit mask of POFWARN field. */
+#define POWER_INTENCLR_POFWARN_Disabled (0UL) /*!< Read: Disabled */
+#define POWER_INTENCLR_POFWARN_Enabled (1UL) /*!< Read: Enabled */
+#define POWER_INTENCLR_POFWARN_Clear (1UL) /*!< Disable */
+
+/* Register: POWER_RESETREAS */
+/* Description: Reset reason */
+
+/* Bit 19 : Reset due to wake up from System OFF mode by NFC field detect */
+#define POWER_RESETREAS_NFC_Pos (19UL) /*!< Position of NFC field. */
+#define POWER_RESETREAS_NFC_Msk (0x1UL << POWER_RESETREAS_NFC_Pos) /*!< Bit mask of NFC field. */
+#define POWER_RESETREAS_NFC_NotDetected (0UL) /*!< Not detected */
+#define POWER_RESETREAS_NFC_Detected (1UL) /*!< Detected */
+
+/* Bit 18 : Reset due to wake up from System OFF mode when wakeup is triggered from entering into debug interface mode */
+#define POWER_RESETREAS_DIF_Pos (18UL) /*!< Position of DIF field. */
+#define POWER_RESETREAS_DIF_Msk (0x1UL << POWER_RESETREAS_DIF_Pos) /*!< Bit mask of DIF field. */
+#define POWER_RESETREAS_DIF_NotDetected (0UL) /*!< Not detected */
+#define POWER_RESETREAS_DIF_Detected (1UL) /*!< Detected */
+
+/* Bit 17 : Reset due to wake up from System OFF mode when wakeup is triggered from ANADETECT signal from LPCOMP */
+#define POWER_RESETREAS_LPCOMP_Pos (17UL) /*!< Position of LPCOMP field. */
+#define POWER_RESETREAS_LPCOMP_Msk (0x1UL << POWER_RESETREAS_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */
+#define POWER_RESETREAS_LPCOMP_NotDetected (0UL) /*!< Not detected */
+#define POWER_RESETREAS_LPCOMP_Detected (1UL) /*!< Detected */
+
+/* Bit 16 : Reset due to wake up from System OFF mode when wakeup is triggered from DETECT signal from GPIO */
+#define POWER_RESETREAS_OFF_Pos (16UL) /*!< Position of OFF field. */
+#define POWER_RESETREAS_OFF_Msk (0x1UL << POWER_RESETREAS_OFF_Pos) /*!< Bit mask of OFF field. */
+#define POWER_RESETREAS_OFF_NotDetected (0UL) /*!< Not detected */
+#define POWER_RESETREAS_OFF_Detected (1UL) /*!< Detected */
+
+/* Bit 3 : Reset from CPU lock-up detected */
+#define POWER_RESETREAS_LOCKUP_Pos (3UL) /*!< Position of LOCKUP field. */
+#define POWER_RESETREAS_LOCKUP_Msk (0x1UL << POWER_RESETREAS_LOCKUP_Pos) /*!< Bit mask of LOCKUP field. */
+#define POWER_RESETREAS_LOCKUP_NotDetected (0UL) /*!< Not detected */
+#define POWER_RESETREAS_LOCKUP_Detected (1UL) /*!< Detected */
+
+/* Bit 2 : Reset from soft reset detected */
+#define POWER_RESETREAS_SREQ_Pos (2UL) /*!< Position of SREQ field. */
+#define POWER_RESETREAS_SREQ_Msk (0x1UL << POWER_RESETREAS_SREQ_Pos) /*!< Bit mask of SREQ field. */
+#define POWER_RESETREAS_SREQ_NotDetected (0UL) /*!< Not detected */
+#define POWER_RESETREAS_SREQ_Detected (1UL) /*!< Detected */
+
+/* Bit 1 : Reset from watchdog detected */
+#define POWER_RESETREAS_DOG_Pos (1UL) /*!< Position of DOG field. */
+#define POWER_RESETREAS_DOG_Msk (0x1UL << POWER_RESETREAS_DOG_Pos) /*!< Bit mask of DOG field. */
+#define POWER_RESETREAS_DOG_NotDetected (0UL) /*!< Not detected */
+#define POWER_RESETREAS_DOG_Detected (1UL) /*!< Detected */
+
+/* Bit 0 : Reset from pin-reset detected */
+#define POWER_RESETREAS_RESETPIN_Pos (0UL) /*!< Position of RESETPIN field. */
+#define POWER_RESETREAS_RESETPIN_Msk (0x1UL << POWER_RESETREAS_RESETPIN_Pos) /*!< Bit mask of RESETPIN field. */
+#define POWER_RESETREAS_RESETPIN_NotDetected (0UL) /*!< Not detected */
+#define POWER_RESETREAS_RESETPIN_Detected (1UL) /*!< Detected */
+
+/* Register: POWER_RAMSTATUS */
+/* Description: Deprecated register - RAM status register */
+
+/* Bit 3 : RAM block 3 is on or off/powering up */
+#define POWER_RAMSTATUS_RAMBLOCK3_Pos (3UL) /*!< Position of RAMBLOCK3 field. */
+#define POWER_RAMSTATUS_RAMBLOCK3_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK3_Pos) /*!< Bit mask of RAMBLOCK3 field. */
+#define POWER_RAMSTATUS_RAMBLOCK3_Off (0UL) /*!< Off */
+#define POWER_RAMSTATUS_RAMBLOCK3_On (1UL) /*!< On */
+
+/* Bit 2 : RAM block 2 is on or off/powering up */
+#define POWER_RAMSTATUS_RAMBLOCK2_Pos (2UL) /*!< Position of RAMBLOCK2 field. */
+#define POWER_RAMSTATUS_RAMBLOCK2_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK2_Pos) /*!< Bit mask of RAMBLOCK2 field. */
+#define POWER_RAMSTATUS_RAMBLOCK2_Off (0UL) /*!< Off */
+#define POWER_RAMSTATUS_RAMBLOCK2_On (1UL) /*!< On */
+
+/* Bit 1 : RAM block 1 is on or off/powering up */
+#define POWER_RAMSTATUS_RAMBLOCK1_Pos (1UL) /*!< Position of RAMBLOCK1 field. */
+#define POWER_RAMSTATUS_RAMBLOCK1_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK1_Pos) /*!< Bit mask of RAMBLOCK1 field. */
+#define POWER_RAMSTATUS_RAMBLOCK1_Off (0UL) /*!< Off */
+#define POWER_RAMSTATUS_RAMBLOCK1_On (1UL) /*!< On */
+
+/* Bit 0 : RAM block 0 is on or off/powering up */
+#define POWER_RAMSTATUS_RAMBLOCK0_Pos (0UL) /*!< Position of RAMBLOCK0 field. */
+#define POWER_RAMSTATUS_RAMBLOCK0_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK0_Pos) /*!< Bit mask of RAMBLOCK0 field. */
+#define POWER_RAMSTATUS_RAMBLOCK0_Off (0UL) /*!< Off */
+#define POWER_RAMSTATUS_RAMBLOCK0_On (1UL) /*!< On */
+
+/* Register: POWER_SYSTEMOFF */
+/* Description: System OFF register */
+
+/* Bit 0 : Enable System OFF mode */
+#define POWER_SYSTEMOFF_SYSTEMOFF_Pos (0UL) /*!< Position of SYSTEMOFF field. */
+#define POWER_SYSTEMOFF_SYSTEMOFF_Msk (0x1UL << POWER_SYSTEMOFF_SYSTEMOFF_Pos) /*!< Bit mask of SYSTEMOFF field. */
+#define POWER_SYSTEMOFF_SYSTEMOFF_Enter (1UL) /*!< Enable System OFF mode */
+
+/* Register: POWER_POFCON */
+/* Description: Power failure comparator configuration */
+
+/* Bits 4..1 : Power failure comparator threshold setting */
+#define POWER_POFCON_THRESHOLD_Pos (1UL) /*!< Position of THRESHOLD field. */
+#define POWER_POFCON_THRESHOLD_Msk (0xFUL << POWER_POFCON_THRESHOLD_Pos) /*!< Bit mask of THRESHOLD field. */
+#define POWER_POFCON_THRESHOLD_V17 (4UL) /*!< Set threshold to 1.7 V */
+#define POWER_POFCON_THRESHOLD_V18 (5UL) /*!< Set threshold to 1.8 V */
+#define POWER_POFCON_THRESHOLD_V19 (6UL) /*!< Set threshold to 1.9 V */
+#define POWER_POFCON_THRESHOLD_V20 (7UL) /*!< Set threshold to 2.0 V */
+#define POWER_POFCON_THRESHOLD_V21 (8UL) /*!< Set threshold to 2.1 V */
+#define POWER_POFCON_THRESHOLD_V22 (9UL) /*!< Set threshold to 2.2 V */
+#define POWER_POFCON_THRESHOLD_V23 (10UL) /*!< Set threshold to 2.3 V */
+#define POWER_POFCON_THRESHOLD_V24 (11UL) /*!< Set threshold to 2.4 V */
+#define POWER_POFCON_THRESHOLD_V25 (12UL) /*!< Set threshold to 2.5 V */
+#define POWER_POFCON_THRESHOLD_V26 (13UL) /*!< Set threshold to 2.6 V */
+#define POWER_POFCON_THRESHOLD_V27 (14UL) /*!< Set threshold to 2.7 V */
+#define POWER_POFCON_THRESHOLD_V28 (15UL) /*!< Set threshold to 2.8 V */
+
+/* Bit 0 : Enable or disable power failure comparator */
+#define POWER_POFCON_POF_Pos (0UL) /*!< Position of POF field. */
+#define POWER_POFCON_POF_Msk (0x1UL << POWER_POFCON_POF_Pos) /*!< Bit mask of POF field. */
+#define POWER_POFCON_POF_Disabled (0UL) /*!< Disable */
+#define POWER_POFCON_POF_Enabled (1UL) /*!< Enable */
+
+/* Register: POWER_GPREGRET */
+/* Description: General purpose retention register */
+
+/* Bits 7..0 : General purpose retention register */
+#define POWER_GPREGRET_GPREGRET_Pos (0UL) /*!< Position of GPREGRET field. */
+#define POWER_GPREGRET_GPREGRET_Msk (0xFFUL << POWER_GPREGRET_GPREGRET_Pos) /*!< Bit mask of GPREGRET field. */
+
+/* Register: POWER_GPREGRET2 */
+/* Description: General purpose retention register */
+
+/* Bits 7..0 : General purpose retention register */
+#define POWER_GPREGRET2_GPREGRET_Pos (0UL) /*!< Position of GPREGRET field. */
+#define POWER_GPREGRET2_GPREGRET_Msk (0xFFUL << POWER_GPREGRET2_GPREGRET_Pos) /*!< Bit mask of GPREGRET field. */
+
+/* Register: POWER_RAMON */
+/* Description: Deprecated register - RAM on/off register (this register is retained) */
+
+/* Bit 17 : Keep retention on RAM block 1 when RAM block is switched off */
+#define POWER_RAMON_OFFRAM1_Pos (17UL) /*!< Position of OFFRAM1 field. */
+#define POWER_RAMON_OFFRAM1_Msk (0x1UL << POWER_RAMON_OFFRAM1_Pos) /*!< Bit mask of OFFRAM1 field. */
+#define POWER_RAMON_OFFRAM1_RAM1Off (0UL) /*!< Off */
+#define POWER_RAMON_OFFRAM1_RAM1On (1UL) /*!< On */
+
+/* Bit 16 : Keep retention on RAM block 0 when RAM block is switched off */
+#define POWER_RAMON_OFFRAM0_Pos (16UL) /*!< Position of OFFRAM0 field. */
+#define POWER_RAMON_OFFRAM0_Msk (0x1UL << POWER_RAMON_OFFRAM0_Pos) /*!< Bit mask of OFFRAM0 field. */
+#define POWER_RAMON_OFFRAM0_RAM0Off (0UL) /*!< Off */
+#define POWER_RAMON_OFFRAM0_RAM0On (1UL) /*!< On */
+
+/* Bit 1 : Keep RAM block 1 on or off in system ON Mode */
+#define POWER_RAMON_ONRAM1_Pos (1UL) /*!< Position of ONRAM1 field. */
+#define POWER_RAMON_ONRAM1_Msk (0x1UL << POWER_RAMON_ONRAM1_Pos) /*!< Bit mask of ONRAM1 field. */
+#define POWER_RAMON_ONRAM1_RAM1Off (0UL) /*!< Off */
+#define POWER_RAMON_ONRAM1_RAM1On (1UL) /*!< On */
+
+/* Bit 0 : Keep RAM block 0 on or off in system ON Mode */
+#define POWER_RAMON_ONRAM0_Pos (0UL) /*!< Position of ONRAM0 field. */
+#define POWER_RAMON_ONRAM0_Msk (0x1UL << POWER_RAMON_ONRAM0_Pos) /*!< Bit mask of ONRAM0 field. */
+#define POWER_RAMON_ONRAM0_RAM0Off (0UL) /*!< Off */
+#define POWER_RAMON_ONRAM0_RAM0On (1UL) /*!< On */
+
+/* Register: POWER_RAMONB */
+/* Description: Deprecated register - RAM on/off register (this register is retained) */
+
+/* Bit 17 : Keep retention on RAM block 3 when RAM block is switched off */
+#define POWER_RAMONB_OFFRAM3_Pos (17UL) /*!< Position of OFFRAM3 field. */
+#define POWER_RAMONB_OFFRAM3_Msk (0x1UL << POWER_RAMONB_OFFRAM3_Pos) /*!< Bit mask of OFFRAM3 field. */
+#define POWER_RAMONB_OFFRAM3_RAM3Off (0UL) /*!< Off */
+#define POWER_RAMONB_OFFRAM3_RAM3On (1UL) /*!< On */
+
+/* Bit 16 : Keep retention on RAM block 2 when RAM block is switched off */
+#define POWER_RAMONB_OFFRAM2_Pos (16UL) /*!< Position of OFFRAM2 field. */
+#define POWER_RAMONB_OFFRAM2_Msk (0x1UL << POWER_RAMONB_OFFRAM2_Pos) /*!< Bit mask of OFFRAM2 field. */
+#define POWER_RAMONB_OFFRAM2_RAM2Off (0UL) /*!< Off */
+#define POWER_RAMONB_OFFRAM2_RAM2On (1UL) /*!< On */
+
+/* Bit 1 : Keep RAM block 3 on or off in system ON Mode */
+#define POWER_RAMONB_ONRAM3_Pos (1UL) /*!< Position of ONRAM3 field. */
+#define POWER_RAMONB_ONRAM3_Msk (0x1UL << POWER_RAMONB_ONRAM3_Pos) /*!< Bit mask of ONRAM3 field. */
+#define POWER_RAMONB_ONRAM3_RAM3Off (0UL) /*!< Off */
+#define POWER_RAMONB_ONRAM3_RAM3On (1UL) /*!< On */
+
+/* Bit 0 : Keep RAM block 2 on or off in system ON Mode */
+#define POWER_RAMONB_ONRAM2_Pos (0UL) /*!< Position of ONRAM2 field. */
+#define POWER_RAMONB_ONRAM2_Msk (0x1UL << POWER_RAMONB_ONRAM2_Pos) /*!< Bit mask of ONRAM2 field. */
+#define POWER_RAMONB_ONRAM2_RAM2Off (0UL) /*!< Off */
+#define POWER_RAMONB_ONRAM2_RAM2On (1UL) /*!< On */
+
+/* Register: POWER_DCDCEN */
+/* Description: DC/DC enable register */
+
+/* Bit 0 : Enable or disable DC/DC converter */
+#define POWER_DCDCEN_DCDCEN_Pos (0UL) /*!< Position of DCDCEN field. */
+#define POWER_DCDCEN_DCDCEN_Msk (0x1UL << POWER_DCDCEN_DCDCEN_Pos) /*!< Bit mask of DCDCEN field. */
+#define POWER_DCDCEN_DCDCEN_Disabled (0UL) /*!< Disable */
+#define POWER_DCDCEN_DCDCEN_Enabled (1UL) /*!< Enable */
+
+/* Register: POWER_RAM_POWER */
+/* Description: Description cluster[0]: RAM0 power control register */
+
+/* Bit 17 : Keep retention on RAM section S1 when RAM section is in OFF */
+#define POWER_RAM_POWER_S1RETENTION_Pos (17UL) /*!< Position of S1RETENTION field. */
+#define POWER_RAM_POWER_S1RETENTION_Msk (0x1UL << POWER_RAM_POWER_S1RETENTION_Pos) /*!< Bit mask of S1RETENTION field. */
+#define POWER_RAM_POWER_S1RETENTION_Off (0UL) /*!< Off */
+#define POWER_RAM_POWER_S1RETENTION_On (1UL) /*!< On */
+
+/* Bit 16 : Keep retention on RAM section S0 when RAM section is in OFF */
+#define POWER_RAM_POWER_S0RETENTION_Pos (16UL) /*!< Position of S0RETENTION field. */
+#define POWER_RAM_POWER_S0RETENTION_Msk (0x1UL << POWER_RAM_POWER_S0RETENTION_Pos) /*!< Bit mask of S0RETENTION field. */
+#define POWER_RAM_POWER_S0RETENTION_Off (0UL) /*!< Off */
+#define POWER_RAM_POWER_S0RETENTION_On (1UL) /*!< On */
+
+/* Bit 1 : Keep RAM section S1 ON or OFF in System ON mode. */
+#define POWER_RAM_POWER_S1POWER_Pos (1UL) /*!< Position of S1POWER field. */
+#define POWER_RAM_POWER_S1POWER_Msk (0x1UL << POWER_RAM_POWER_S1POWER_Pos) /*!< Bit mask of S1POWER field. */
+#define POWER_RAM_POWER_S1POWER_Off (0UL) /*!< Off */
+#define POWER_RAM_POWER_S1POWER_On (1UL) /*!< On */
+
+/* Bit 0 : Keep RAM section S0 ON or OFF in System ON mode. */
+#define POWER_RAM_POWER_S0POWER_Pos (0UL) /*!< Position of S0POWER field. */
+#define POWER_RAM_POWER_S0POWER_Msk (0x1UL << POWER_RAM_POWER_S0POWER_Pos) /*!< Bit mask of S0POWER field. */
+#define POWER_RAM_POWER_S0POWER_Off (0UL) /*!< Off */
+#define POWER_RAM_POWER_S0POWER_On (1UL) /*!< On */
+
+/* Register: POWER_RAM_POWERSET */
+/* Description: Description cluster[0]: RAM0 power control set register */
+
+/* Bit 17 : Keep retention on RAM section S1 when RAM section is switched off */
+#define POWER_RAM_POWERSET_S1RETENTION_Pos (17UL) /*!< Position of S1RETENTION field. */
+#define POWER_RAM_POWERSET_S1RETENTION_Msk (0x1UL << POWER_RAM_POWERSET_S1RETENTION_Pos) /*!< Bit mask of S1RETENTION field. */
+#define POWER_RAM_POWERSET_S1RETENTION_On (1UL) /*!< On */
+
+/* Bit 16 : Keep retention on RAM section S0 when RAM section is switched off */
+#define POWER_RAM_POWERSET_S0RETENTION_Pos (16UL) /*!< Position of S0RETENTION field. */
+#define POWER_RAM_POWERSET_S0RETENTION_Msk (0x1UL << POWER_RAM_POWERSET_S0RETENTION_Pos) /*!< Bit mask of S0RETENTION field. */
+#define POWER_RAM_POWERSET_S0RETENTION_On (1UL) /*!< On */
+
+/* Bit 1 : Keep RAM section S1 of RAM0 on or off in System ON mode */
+#define POWER_RAM_POWERSET_S1POWER_Pos (1UL) /*!< Position of S1POWER field. */
+#define POWER_RAM_POWERSET_S1POWER_Msk (0x1UL << POWER_RAM_POWERSET_S1POWER_Pos) /*!< Bit mask of S1POWER field. */
+#define POWER_RAM_POWERSET_S1POWER_On (1UL) /*!< On */
+
+/* Bit 0 : Keep RAM section S0 of RAM0 on or off in System ON mode */
+#define POWER_RAM_POWERSET_S0POWER_Pos (0UL) /*!< Position of S0POWER field. */
+#define POWER_RAM_POWERSET_S0POWER_Msk (0x1UL << POWER_RAM_POWERSET_S0POWER_Pos) /*!< Bit mask of S0POWER field. */
+#define POWER_RAM_POWERSET_S0POWER_On (1UL) /*!< On */
+
+/* Register: POWER_RAM_POWERCLR */
+/* Description: Description cluster[0]: RAM0 power control clear register */
+
+/* Bit 17 : Keep retention on RAM section S1 when RAM section is switched off */
+#define POWER_RAM_POWERCLR_S1RETENTION_Pos (17UL) /*!< Position of S1RETENTION field. */
+#define POWER_RAM_POWERCLR_S1RETENTION_Msk (0x1UL << POWER_RAM_POWERCLR_S1RETENTION_Pos) /*!< Bit mask of S1RETENTION field. */
+#define POWER_RAM_POWERCLR_S1RETENTION_Off (1UL) /*!< Off */
+
+/* Bit 16 : Keep retention on RAM section S0 when RAM section is switched off */
+#define POWER_RAM_POWERCLR_S0RETENTION_Pos (16UL) /*!< Position of S0RETENTION field. */
+#define POWER_RAM_POWERCLR_S0RETENTION_Msk (0x1UL << POWER_RAM_POWERCLR_S0RETENTION_Pos) /*!< Bit mask of S0RETENTION field. */
+#define POWER_RAM_POWERCLR_S0RETENTION_Off (1UL) /*!< Off */
+
+/* Bit 1 : Keep RAM section S1 of RAM0 on or off in System ON mode */
+#define POWER_RAM_POWERCLR_S1POWER_Pos (1UL) /*!< Position of S1POWER field. */
+#define POWER_RAM_POWERCLR_S1POWER_Msk (0x1UL << POWER_RAM_POWERCLR_S1POWER_Pos) /*!< Bit mask of S1POWER field. */
+#define POWER_RAM_POWERCLR_S1POWER_Off (1UL) /*!< Off */
+
+/* Bit 0 : Keep RAM section S0 of RAM0 on or off in System ON mode */
+#define POWER_RAM_POWERCLR_S0POWER_Pos (0UL) /*!< Position of S0POWER field. */
+#define POWER_RAM_POWERCLR_S0POWER_Msk (0x1UL << POWER_RAM_POWERCLR_S0POWER_Pos) /*!< Bit mask of S0POWER field. */
+#define POWER_RAM_POWERCLR_S0POWER_Off (1UL) /*!< Off */
+
+
+/* Peripheral: PPI */
+/* Description: Programmable Peripheral Interconnect */
+
+/* Register: PPI_CHEN */
+/* Description: Channel enable register */
+
+/* Bit 31 : Enable or disable channel 31 */
+#define PPI_CHEN_CH31_Pos (31UL) /*!< Position of CH31 field. */
+#define PPI_CHEN_CH31_Msk (0x1UL << PPI_CHEN_CH31_Pos) /*!< Bit mask of CH31 field. */
+#define PPI_CHEN_CH31_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH31_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 30 : Enable or disable channel 30 */
+#define PPI_CHEN_CH30_Pos (30UL) /*!< Position of CH30 field. */
+#define PPI_CHEN_CH30_Msk (0x1UL << PPI_CHEN_CH30_Pos) /*!< Bit mask of CH30 field. */
+#define PPI_CHEN_CH30_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH30_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 29 : Enable or disable channel 29 */
+#define PPI_CHEN_CH29_Pos (29UL) /*!< Position of CH29 field. */
+#define PPI_CHEN_CH29_Msk (0x1UL << PPI_CHEN_CH29_Pos) /*!< Bit mask of CH29 field. */
+#define PPI_CHEN_CH29_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH29_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 28 : Enable or disable channel 28 */
+#define PPI_CHEN_CH28_Pos (28UL) /*!< Position of CH28 field. */
+#define PPI_CHEN_CH28_Msk (0x1UL << PPI_CHEN_CH28_Pos) /*!< Bit mask of CH28 field. */
+#define PPI_CHEN_CH28_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH28_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 27 : Enable or disable channel 27 */
+#define PPI_CHEN_CH27_Pos (27UL) /*!< Position of CH27 field. */
+#define PPI_CHEN_CH27_Msk (0x1UL << PPI_CHEN_CH27_Pos) /*!< Bit mask of CH27 field. */
+#define PPI_CHEN_CH27_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH27_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 26 : Enable or disable channel 26 */
+#define PPI_CHEN_CH26_Pos (26UL) /*!< Position of CH26 field. */
+#define PPI_CHEN_CH26_Msk (0x1UL << PPI_CHEN_CH26_Pos) /*!< Bit mask of CH26 field. */
+#define PPI_CHEN_CH26_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH26_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 25 : Enable or disable channel 25 */
+#define PPI_CHEN_CH25_Pos (25UL) /*!< Position of CH25 field. */
+#define PPI_CHEN_CH25_Msk (0x1UL << PPI_CHEN_CH25_Pos) /*!< Bit mask of CH25 field. */
+#define PPI_CHEN_CH25_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH25_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 24 : Enable or disable channel 24 */
+#define PPI_CHEN_CH24_Pos (24UL) /*!< Position of CH24 field. */
+#define PPI_CHEN_CH24_Msk (0x1UL << PPI_CHEN_CH24_Pos) /*!< Bit mask of CH24 field. */
+#define PPI_CHEN_CH24_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH24_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 23 : Enable or disable channel 23 */
+#define PPI_CHEN_CH23_Pos (23UL) /*!< Position of CH23 field. */
+#define PPI_CHEN_CH23_Msk (0x1UL << PPI_CHEN_CH23_Pos) /*!< Bit mask of CH23 field. */
+#define PPI_CHEN_CH23_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH23_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 22 : Enable or disable channel 22 */
+#define PPI_CHEN_CH22_Pos (22UL) /*!< Position of CH22 field. */
+#define PPI_CHEN_CH22_Msk (0x1UL << PPI_CHEN_CH22_Pos) /*!< Bit mask of CH22 field. */
+#define PPI_CHEN_CH22_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH22_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 21 : Enable or disable channel 21 */
+#define PPI_CHEN_CH21_Pos (21UL) /*!< Position of CH21 field. */
+#define PPI_CHEN_CH21_Msk (0x1UL << PPI_CHEN_CH21_Pos) /*!< Bit mask of CH21 field. */
+#define PPI_CHEN_CH21_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH21_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 20 : Enable or disable channel 20 */
+#define PPI_CHEN_CH20_Pos (20UL) /*!< Position of CH20 field. */
+#define PPI_CHEN_CH20_Msk (0x1UL << PPI_CHEN_CH20_Pos) /*!< Bit mask of CH20 field. */
+#define PPI_CHEN_CH20_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH20_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 19 : Enable or disable channel 19 */
+#define PPI_CHEN_CH19_Pos (19UL) /*!< Position of CH19 field. */
+#define PPI_CHEN_CH19_Msk (0x1UL << PPI_CHEN_CH19_Pos) /*!< Bit mask of CH19 field. */
+#define PPI_CHEN_CH19_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH19_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 18 : Enable or disable channel 18 */
+#define PPI_CHEN_CH18_Pos (18UL) /*!< Position of CH18 field. */
+#define PPI_CHEN_CH18_Msk (0x1UL << PPI_CHEN_CH18_Pos) /*!< Bit mask of CH18 field. */
+#define PPI_CHEN_CH18_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH18_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 17 : Enable or disable channel 17 */
+#define PPI_CHEN_CH17_Pos (17UL) /*!< Position of CH17 field. */
+#define PPI_CHEN_CH17_Msk (0x1UL << PPI_CHEN_CH17_Pos) /*!< Bit mask of CH17 field. */
+#define PPI_CHEN_CH17_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH17_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 16 : Enable or disable channel 16 */
+#define PPI_CHEN_CH16_Pos (16UL) /*!< Position of CH16 field. */
+#define PPI_CHEN_CH16_Msk (0x1UL << PPI_CHEN_CH16_Pos) /*!< Bit mask of CH16 field. */
+#define PPI_CHEN_CH16_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH16_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 15 : Enable or disable channel 15 */
+#define PPI_CHEN_CH15_Pos (15UL) /*!< Position of CH15 field. */
+#define PPI_CHEN_CH15_Msk (0x1UL << PPI_CHEN_CH15_Pos) /*!< Bit mask of CH15 field. */
+#define PPI_CHEN_CH15_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH15_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 14 : Enable or disable channel 14 */
+#define PPI_CHEN_CH14_Pos (14UL) /*!< Position of CH14 field. */
+#define PPI_CHEN_CH14_Msk (0x1UL << PPI_CHEN_CH14_Pos) /*!< Bit mask of CH14 field. */
+#define PPI_CHEN_CH14_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH14_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 13 : Enable or disable channel 13 */
+#define PPI_CHEN_CH13_Pos (13UL) /*!< Position of CH13 field. */
+#define PPI_CHEN_CH13_Msk (0x1UL << PPI_CHEN_CH13_Pos) /*!< Bit mask of CH13 field. */
+#define PPI_CHEN_CH13_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH13_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 12 : Enable or disable channel 12 */
+#define PPI_CHEN_CH12_Pos (12UL) /*!< Position of CH12 field. */
+#define PPI_CHEN_CH12_Msk (0x1UL << PPI_CHEN_CH12_Pos) /*!< Bit mask of CH12 field. */
+#define PPI_CHEN_CH12_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH12_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 11 : Enable or disable channel 11 */
+#define PPI_CHEN_CH11_Pos (11UL) /*!< Position of CH11 field. */
+#define PPI_CHEN_CH11_Msk (0x1UL << PPI_CHEN_CH11_Pos) /*!< Bit mask of CH11 field. */
+#define PPI_CHEN_CH11_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH11_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 10 : Enable or disable channel 10 */
+#define PPI_CHEN_CH10_Pos (10UL) /*!< Position of CH10 field. */
+#define PPI_CHEN_CH10_Msk (0x1UL << PPI_CHEN_CH10_Pos) /*!< Bit mask of CH10 field. */
+#define PPI_CHEN_CH10_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH10_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 9 : Enable or disable channel 9 */
+#define PPI_CHEN_CH9_Pos (9UL) /*!< Position of CH9 field. */
+#define PPI_CHEN_CH9_Msk (0x1UL << PPI_CHEN_CH9_Pos) /*!< Bit mask of CH9 field. */
+#define PPI_CHEN_CH9_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH9_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 8 : Enable or disable channel 8 */
+#define PPI_CHEN_CH8_Pos (8UL) /*!< Position of CH8 field. */
+#define PPI_CHEN_CH8_Msk (0x1UL << PPI_CHEN_CH8_Pos) /*!< Bit mask of CH8 field. */
+#define PPI_CHEN_CH8_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH8_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 7 : Enable or disable channel 7 */
+#define PPI_CHEN_CH7_Pos (7UL) /*!< Position of CH7 field. */
+#define PPI_CHEN_CH7_Msk (0x1UL << PPI_CHEN_CH7_Pos) /*!< Bit mask of CH7 field. */
+#define PPI_CHEN_CH7_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH7_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 6 : Enable or disable channel 6 */
+#define PPI_CHEN_CH6_Pos (6UL) /*!< Position of CH6 field. */
+#define PPI_CHEN_CH6_Msk (0x1UL << PPI_CHEN_CH6_Pos) /*!< Bit mask of CH6 field. */
+#define PPI_CHEN_CH6_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH6_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 5 : Enable or disable channel 5 */
+#define PPI_CHEN_CH5_Pos (5UL) /*!< Position of CH5 field. */
+#define PPI_CHEN_CH5_Msk (0x1UL << PPI_CHEN_CH5_Pos) /*!< Bit mask of CH5 field. */
+#define PPI_CHEN_CH5_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH5_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 4 : Enable or disable channel 4 */
+#define PPI_CHEN_CH4_Pos (4UL) /*!< Position of CH4 field. */
+#define PPI_CHEN_CH4_Msk (0x1UL << PPI_CHEN_CH4_Pos) /*!< Bit mask of CH4 field. */
+#define PPI_CHEN_CH4_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH4_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 3 : Enable or disable channel 3 */
+#define PPI_CHEN_CH3_Pos (3UL) /*!< Position of CH3 field. */
+#define PPI_CHEN_CH3_Msk (0x1UL << PPI_CHEN_CH3_Pos) /*!< Bit mask of CH3 field. */
+#define PPI_CHEN_CH3_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH3_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 2 : Enable or disable channel 2 */
+#define PPI_CHEN_CH2_Pos (2UL) /*!< Position of CH2 field. */
+#define PPI_CHEN_CH2_Msk (0x1UL << PPI_CHEN_CH2_Pos) /*!< Bit mask of CH2 field. */
+#define PPI_CHEN_CH2_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH2_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 1 : Enable or disable channel 1 */
+#define PPI_CHEN_CH1_Pos (1UL) /*!< Position of CH1 field. */
+#define PPI_CHEN_CH1_Msk (0x1UL << PPI_CHEN_CH1_Pos) /*!< Bit mask of CH1 field. */
+#define PPI_CHEN_CH1_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH1_Enabled (1UL) /*!< Enable channel */
+
+/* Bit 0 : Enable or disable channel 0 */
+#define PPI_CHEN_CH0_Pos (0UL) /*!< Position of CH0 field. */
+#define PPI_CHEN_CH0_Msk (0x1UL << PPI_CHEN_CH0_Pos) /*!< Bit mask of CH0 field. */
+#define PPI_CHEN_CH0_Disabled (0UL) /*!< Disable channel */
+#define PPI_CHEN_CH0_Enabled (1UL) /*!< Enable channel */
+
+/* Register: PPI_CHENSET */
+/* Description: Channel enable set register */
+
+/* Bit 31 : Channel 31 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH31_Pos (31UL) /*!< Position of CH31 field. */
+#define PPI_CHENSET_CH31_Msk (0x1UL << PPI_CHENSET_CH31_Pos) /*!< Bit mask of CH31 field. */
+#define PPI_CHENSET_CH31_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH31_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH31_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 30 : Channel 30 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH30_Pos (30UL) /*!< Position of CH30 field. */
+#define PPI_CHENSET_CH30_Msk (0x1UL << PPI_CHENSET_CH30_Pos) /*!< Bit mask of CH30 field. */
+#define PPI_CHENSET_CH30_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH30_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH30_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 29 : Channel 29 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH29_Pos (29UL) /*!< Position of CH29 field. */
+#define PPI_CHENSET_CH29_Msk (0x1UL << PPI_CHENSET_CH29_Pos) /*!< Bit mask of CH29 field. */
+#define PPI_CHENSET_CH29_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH29_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH29_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 28 : Channel 28 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH28_Pos (28UL) /*!< Position of CH28 field. */
+#define PPI_CHENSET_CH28_Msk (0x1UL << PPI_CHENSET_CH28_Pos) /*!< Bit mask of CH28 field. */
+#define PPI_CHENSET_CH28_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH28_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH28_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 27 : Channel 27 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH27_Pos (27UL) /*!< Position of CH27 field. */
+#define PPI_CHENSET_CH27_Msk (0x1UL << PPI_CHENSET_CH27_Pos) /*!< Bit mask of CH27 field. */
+#define PPI_CHENSET_CH27_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH27_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH27_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 26 : Channel 26 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH26_Pos (26UL) /*!< Position of CH26 field. */
+#define PPI_CHENSET_CH26_Msk (0x1UL << PPI_CHENSET_CH26_Pos) /*!< Bit mask of CH26 field. */
+#define PPI_CHENSET_CH26_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH26_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH26_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 25 : Channel 25 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH25_Pos (25UL) /*!< Position of CH25 field. */
+#define PPI_CHENSET_CH25_Msk (0x1UL << PPI_CHENSET_CH25_Pos) /*!< Bit mask of CH25 field. */
+#define PPI_CHENSET_CH25_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH25_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH25_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 24 : Channel 24 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH24_Pos (24UL) /*!< Position of CH24 field. */
+#define PPI_CHENSET_CH24_Msk (0x1UL << PPI_CHENSET_CH24_Pos) /*!< Bit mask of CH24 field. */
+#define PPI_CHENSET_CH24_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH24_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH24_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 23 : Channel 23 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH23_Pos (23UL) /*!< Position of CH23 field. */
+#define PPI_CHENSET_CH23_Msk (0x1UL << PPI_CHENSET_CH23_Pos) /*!< Bit mask of CH23 field. */
+#define PPI_CHENSET_CH23_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH23_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH23_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 22 : Channel 22 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH22_Pos (22UL) /*!< Position of CH22 field. */
+#define PPI_CHENSET_CH22_Msk (0x1UL << PPI_CHENSET_CH22_Pos) /*!< Bit mask of CH22 field. */
+#define PPI_CHENSET_CH22_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH22_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH22_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 21 : Channel 21 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH21_Pos (21UL) /*!< Position of CH21 field. */
+#define PPI_CHENSET_CH21_Msk (0x1UL << PPI_CHENSET_CH21_Pos) /*!< Bit mask of CH21 field. */
+#define PPI_CHENSET_CH21_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH21_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH21_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 20 : Channel 20 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH20_Pos (20UL) /*!< Position of CH20 field. */
+#define PPI_CHENSET_CH20_Msk (0x1UL << PPI_CHENSET_CH20_Pos) /*!< Bit mask of CH20 field. */
+#define PPI_CHENSET_CH20_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH20_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH20_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 19 : Channel 19 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH19_Pos (19UL) /*!< Position of CH19 field. */
+#define PPI_CHENSET_CH19_Msk (0x1UL << PPI_CHENSET_CH19_Pos) /*!< Bit mask of CH19 field. */
+#define PPI_CHENSET_CH19_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH19_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH19_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 18 : Channel 18 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH18_Pos (18UL) /*!< Position of CH18 field. */
+#define PPI_CHENSET_CH18_Msk (0x1UL << PPI_CHENSET_CH18_Pos) /*!< Bit mask of CH18 field. */
+#define PPI_CHENSET_CH18_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH18_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH18_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 17 : Channel 17 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH17_Pos (17UL) /*!< Position of CH17 field. */
+#define PPI_CHENSET_CH17_Msk (0x1UL << PPI_CHENSET_CH17_Pos) /*!< Bit mask of CH17 field. */
+#define PPI_CHENSET_CH17_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH17_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH17_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 16 : Channel 16 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH16_Pos (16UL) /*!< Position of CH16 field. */
+#define PPI_CHENSET_CH16_Msk (0x1UL << PPI_CHENSET_CH16_Pos) /*!< Bit mask of CH16 field. */
+#define PPI_CHENSET_CH16_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH16_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH16_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 15 : Channel 15 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH15_Pos (15UL) /*!< Position of CH15 field. */
+#define PPI_CHENSET_CH15_Msk (0x1UL << PPI_CHENSET_CH15_Pos) /*!< Bit mask of CH15 field. */
+#define PPI_CHENSET_CH15_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH15_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH15_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 14 : Channel 14 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH14_Pos (14UL) /*!< Position of CH14 field. */
+#define PPI_CHENSET_CH14_Msk (0x1UL << PPI_CHENSET_CH14_Pos) /*!< Bit mask of CH14 field. */
+#define PPI_CHENSET_CH14_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH14_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH14_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 13 : Channel 13 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH13_Pos (13UL) /*!< Position of CH13 field. */
+#define PPI_CHENSET_CH13_Msk (0x1UL << PPI_CHENSET_CH13_Pos) /*!< Bit mask of CH13 field. */
+#define PPI_CHENSET_CH13_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH13_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH13_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 12 : Channel 12 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH12_Pos (12UL) /*!< Position of CH12 field. */
+#define PPI_CHENSET_CH12_Msk (0x1UL << PPI_CHENSET_CH12_Pos) /*!< Bit mask of CH12 field. */
+#define PPI_CHENSET_CH12_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH12_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH12_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 11 : Channel 11 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH11_Pos (11UL) /*!< Position of CH11 field. */
+#define PPI_CHENSET_CH11_Msk (0x1UL << PPI_CHENSET_CH11_Pos) /*!< Bit mask of CH11 field. */
+#define PPI_CHENSET_CH11_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH11_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH11_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 10 : Channel 10 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH10_Pos (10UL) /*!< Position of CH10 field. */
+#define PPI_CHENSET_CH10_Msk (0x1UL << PPI_CHENSET_CH10_Pos) /*!< Bit mask of CH10 field. */
+#define PPI_CHENSET_CH10_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH10_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH10_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 9 : Channel 9 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH9_Pos (9UL) /*!< Position of CH9 field. */
+#define PPI_CHENSET_CH9_Msk (0x1UL << PPI_CHENSET_CH9_Pos) /*!< Bit mask of CH9 field. */
+#define PPI_CHENSET_CH9_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH9_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH9_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 8 : Channel 8 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH8_Pos (8UL) /*!< Position of CH8 field. */
+#define PPI_CHENSET_CH8_Msk (0x1UL << PPI_CHENSET_CH8_Pos) /*!< Bit mask of CH8 field. */
+#define PPI_CHENSET_CH8_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH8_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH8_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 7 : Channel 7 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH7_Pos (7UL) /*!< Position of CH7 field. */
+#define PPI_CHENSET_CH7_Msk (0x1UL << PPI_CHENSET_CH7_Pos) /*!< Bit mask of CH7 field. */
+#define PPI_CHENSET_CH7_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH7_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH7_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 6 : Channel 6 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH6_Pos (6UL) /*!< Position of CH6 field. */
+#define PPI_CHENSET_CH6_Msk (0x1UL << PPI_CHENSET_CH6_Pos) /*!< Bit mask of CH6 field. */
+#define PPI_CHENSET_CH6_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH6_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH6_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 5 : Channel 5 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH5_Pos (5UL) /*!< Position of CH5 field. */
+#define PPI_CHENSET_CH5_Msk (0x1UL << PPI_CHENSET_CH5_Pos) /*!< Bit mask of CH5 field. */
+#define PPI_CHENSET_CH5_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH5_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH5_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 4 : Channel 4 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH4_Pos (4UL) /*!< Position of CH4 field. */
+#define PPI_CHENSET_CH4_Msk (0x1UL << PPI_CHENSET_CH4_Pos) /*!< Bit mask of CH4 field. */
+#define PPI_CHENSET_CH4_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH4_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH4_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 3 : Channel 3 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH3_Pos (3UL) /*!< Position of CH3 field. */
+#define PPI_CHENSET_CH3_Msk (0x1UL << PPI_CHENSET_CH3_Pos) /*!< Bit mask of CH3 field. */
+#define PPI_CHENSET_CH3_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH3_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH3_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 2 : Channel 2 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH2_Pos (2UL) /*!< Position of CH2 field. */
+#define PPI_CHENSET_CH2_Msk (0x1UL << PPI_CHENSET_CH2_Pos) /*!< Bit mask of CH2 field. */
+#define PPI_CHENSET_CH2_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH2_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH2_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 1 : Channel 1 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH1_Pos (1UL) /*!< Position of CH1 field. */
+#define PPI_CHENSET_CH1_Msk (0x1UL << PPI_CHENSET_CH1_Pos) /*!< Bit mask of CH1 field. */
+#define PPI_CHENSET_CH1_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH1_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH1_Set (1UL) /*!< Write: Enable channel */
+
+/* Bit 0 : Channel 0 enable set register. Writing '0' has no effect */
+#define PPI_CHENSET_CH0_Pos (0UL) /*!< Position of CH0 field. */
+#define PPI_CHENSET_CH0_Msk (0x1UL << PPI_CHENSET_CH0_Pos) /*!< Bit mask of CH0 field. */
+#define PPI_CHENSET_CH0_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENSET_CH0_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENSET_CH0_Set (1UL) /*!< Write: Enable channel */
+
+/* Register: PPI_CHENCLR */
+/* Description: Channel enable clear register */
+
+/* Bit 31 : Channel 31 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH31_Pos (31UL) /*!< Position of CH31 field. */
+#define PPI_CHENCLR_CH31_Msk (0x1UL << PPI_CHENCLR_CH31_Pos) /*!< Bit mask of CH31 field. */
+#define PPI_CHENCLR_CH31_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH31_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH31_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 30 : Channel 30 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH30_Pos (30UL) /*!< Position of CH30 field. */
+#define PPI_CHENCLR_CH30_Msk (0x1UL << PPI_CHENCLR_CH30_Pos) /*!< Bit mask of CH30 field. */
+#define PPI_CHENCLR_CH30_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH30_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH30_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 29 : Channel 29 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH29_Pos (29UL) /*!< Position of CH29 field. */
+#define PPI_CHENCLR_CH29_Msk (0x1UL << PPI_CHENCLR_CH29_Pos) /*!< Bit mask of CH29 field. */
+#define PPI_CHENCLR_CH29_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH29_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH29_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 28 : Channel 28 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH28_Pos (28UL) /*!< Position of CH28 field. */
+#define PPI_CHENCLR_CH28_Msk (0x1UL << PPI_CHENCLR_CH28_Pos) /*!< Bit mask of CH28 field. */
+#define PPI_CHENCLR_CH28_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH28_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH28_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 27 : Channel 27 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH27_Pos (27UL) /*!< Position of CH27 field. */
+#define PPI_CHENCLR_CH27_Msk (0x1UL << PPI_CHENCLR_CH27_Pos) /*!< Bit mask of CH27 field. */
+#define PPI_CHENCLR_CH27_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH27_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH27_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 26 : Channel 26 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH26_Pos (26UL) /*!< Position of CH26 field. */
+#define PPI_CHENCLR_CH26_Msk (0x1UL << PPI_CHENCLR_CH26_Pos) /*!< Bit mask of CH26 field. */
+#define PPI_CHENCLR_CH26_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH26_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH26_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 25 : Channel 25 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH25_Pos (25UL) /*!< Position of CH25 field. */
+#define PPI_CHENCLR_CH25_Msk (0x1UL << PPI_CHENCLR_CH25_Pos) /*!< Bit mask of CH25 field. */
+#define PPI_CHENCLR_CH25_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH25_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH25_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 24 : Channel 24 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH24_Pos (24UL) /*!< Position of CH24 field. */
+#define PPI_CHENCLR_CH24_Msk (0x1UL << PPI_CHENCLR_CH24_Pos) /*!< Bit mask of CH24 field. */
+#define PPI_CHENCLR_CH24_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH24_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH24_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 23 : Channel 23 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH23_Pos (23UL) /*!< Position of CH23 field. */
+#define PPI_CHENCLR_CH23_Msk (0x1UL << PPI_CHENCLR_CH23_Pos) /*!< Bit mask of CH23 field. */
+#define PPI_CHENCLR_CH23_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH23_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH23_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 22 : Channel 22 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH22_Pos (22UL) /*!< Position of CH22 field. */
+#define PPI_CHENCLR_CH22_Msk (0x1UL << PPI_CHENCLR_CH22_Pos) /*!< Bit mask of CH22 field. */
+#define PPI_CHENCLR_CH22_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH22_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH22_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 21 : Channel 21 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH21_Pos (21UL) /*!< Position of CH21 field. */
+#define PPI_CHENCLR_CH21_Msk (0x1UL << PPI_CHENCLR_CH21_Pos) /*!< Bit mask of CH21 field. */
+#define PPI_CHENCLR_CH21_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH21_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH21_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 20 : Channel 20 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH20_Pos (20UL) /*!< Position of CH20 field. */
+#define PPI_CHENCLR_CH20_Msk (0x1UL << PPI_CHENCLR_CH20_Pos) /*!< Bit mask of CH20 field. */
+#define PPI_CHENCLR_CH20_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH20_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH20_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 19 : Channel 19 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH19_Pos (19UL) /*!< Position of CH19 field. */
+#define PPI_CHENCLR_CH19_Msk (0x1UL << PPI_CHENCLR_CH19_Pos) /*!< Bit mask of CH19 field. */
+#define PPI_CHENCLR_CH19_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH19_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH19_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 18 : Channel 18 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH18_Pos (18UL) /*!< Position of CH18 field. */
+#define PPI_CHENCLR_CH18_Msk (0x1UL << PPI_CHENCLR_CH18_Pos) /*!< Bit mask of CH18 field. */
+#define PPI_CHENCLR_CH18_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH18_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH18_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 17 : Channel 17 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH17_Pos (17UL) /*!< Position of CH17 field. */
+#define PPI_CHENCLR_CH17_Msk (0x1UL << PPI_CHENCLR_CH17_Pos) /*!< Bit mask of CH17 field. */
+#define PPI_CHENCLR_CH17_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH17_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH17_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 16 : Channel 16 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH16_Pos (16UL) /*!< Position of CH16 field. */
+#define PPI_CHENCLR_CH16_Msk (0x1UL << PPI_CHENCLR_CH16_Pos) /*!< Bit mask of CH16 field. */
+#define PPI_CHENCLR_CH16_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH16_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH16_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 15 : Channel 15 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH15_Pos (15UL) /*!< Position of CH15 field. */
+#define PPI_CHENCLR_CH15_Msk (0x1UL << PPI_CHENCLR_CH15_Pos) /*!< Bit mask of CH15 field. */
+#define PPI_CHENCLR_CH15_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH15_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH15_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 14 : Channel 14 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH14_Pos (14UL) /*!< Position of CH14 field. */
+#define PPI_CHENCLR_CH14_Msk (0x1UL << PPI_CHENCLR_CH14_Pos) /*!< Bit mask of CH14 field. */
+#define PPI_CHENCLR_CH14_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH14_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH14_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 13 : Channel 13 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH13_Pos (13UL) /*!< Position of CH13 field. */
+#define PPI_CHENCLR_CH13_Msk (0x1UL << PPI_CHENCLR_CH13_Pos) /*!< Bit mask of CH13 field. */
+#define PPI_CHENCLR_CH13_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH13_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH13_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 12 : Channel 12 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH12_Pos (12UL) /*!< Position of CH12 field. */
+#define PPI_CHENCLR_CH12_Msk (0x1UL << PPI_CHENCLR_CH12_Pos) /*!< Bit mask of CH12 field. */
+#define PPI_CHENCLR_CH12_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH12_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH12_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 11 : Channel 11 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH11_Pos (11UL) /*!< Position of CH11 field. */
+#define PPI_CHENCLR_CH11_Msk (0x1UL << PPI_CHENCLR_CH11_Pos) /*!< Bit mask of CH11 field. */
+#define PPI_CHENCLR_CH11_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH11_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH11_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 10 : Channel 10 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH10_Pos (10UL) /*!< Position of CH10 field. */
+#define PPI_CHENCLR_CH10_Msk (0x1UL << PPI_CHENCLR_CH10_Pos) /*!< Bit mask of CH10 field. */
+#define PPI_CHENCLR_CH10_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH10_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH10_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 9 : Channel 9 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH9_Pos (9UL) /*!< Position of CH9 field. */
+#define PPI_CHENCLR_CH9_Msk (0x1UL << PPI_CHENCLR_CH9_Pos) /*!< Bit mask of CH9 field. */
+#define PPI_CHENCLR_CH9_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH9_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH9_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 8 : Channel 8 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH8_Pos (8UL) /*!< Position of CH8 field. */
+#define PPI_CHENCLR_CH8_Msk (0x1UL << PPI_CHENCLR_CH8_Pos) /*!< Bit mask of CH8 field. */
+#define PPI_CHENCLR_CH8_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH8_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH8_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 7 : Channel 7 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH7_Pos (7UL) /*!< Position of CH7 field. */
+#define PPI_CHENCLR_CH7_Msk (0x1UL << PPI_CHENCLR_CH7_Pos) /*!< Bit mask of CH7 field. */
+#define PPI_CHENCLR_CH7_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH7_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH7_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 6 : Channel 6 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH6_Pos (6UL) /*!< Position of CH6 field. */
+#define PPI_CHENCLR_CH6_Msk (0x1UL << PPI_CHENCLR_CH6_Pos) /*!< Bit mask of CH6 field. */
+#define PPI_CHENCLR_CH6_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH6_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH6_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 5 : Channel 5 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH5_Pos (5UL) /*!< Position of CH5 field. */
+#define PPI_CHENCLR_CH5_Msk (0x1UL << PPI_CHENCLR_CH5_Pos) /*!< Bit mask of CH5 field. */
+#define PPI_CHENCLR_CH5_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH5_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH5_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 4 : Channel 4 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH4_Pos (4UL) /*!< Position of CH4 field. */
+#define PPI_CHENCLR_CH4_Msk (0x1UL << PPI_CHENCLR_CH4_Pos) /*!< Bit mask of CH4 field. */
+#define PPI_CHENCLR_CH4_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH4_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH4_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 3 : Channel 3 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH3_Pos (3UL) /*!< Position of CH3 field. */
+#define PPI_CHENCLR_CH3_Msk (0x1UL << PPI_CHENCLR_CH3_Pos) /*!< Bit mask of CH3 field. */
+#define PPI_CHENCLR_CH3_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH3_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH3_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 2 : Channel 2 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH2_Pos (2UL) /*!< Position of CH2 field. */
+#define PPI_CHENCLR_CH2_Msk (0x1UL << PPI_CHENCLR_CH2_Pos) /*!< Bit mask of CH2 field. */
+#define PPI_CHENCLR_CH2_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH2_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH2_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 1 : Channel 1 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH1_Pos (1UL) /*!< Position of CH1 field. */
+#define PPI_CHENCLR_CH1_Msk (0x1UL << PPI_CHENCLR_CH1_Pos) /*!< Bit mask of CH1 field. */
+#define PPI_CHENCLR_CH1_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH1_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH1_Clear (1UL) /*!< Write: disable channel */
+
+/* Bit 0 : Channel 0 enable clear register. Writing '0' has no effect */
+#define PPI_CHENCLR_CH0_Pos (0UL) /*!< Position of CH0 field. */
+#define PPI_CHENCLR_CH0_Msk (0x1UL << PPI_CHENCLR_CH0_Pos) /*!< Bit mask of CH0 field. */
+#define PPI_CHENCLR_CH0_Disabled (0UL) /*!< Read: channel disabled */
+#define PPI_CHENCLR_CH0_Enabled (1UL) /*!< Read: channel enabled */
+#define PPI_CHENCLR_CH0_Clear (1UL) /*!< Write: disable channel */
+
+/* Register: PPI_CH_EEP */
+/* Description: Description cluster[0]: Channel 0 event end-point */
+
+/* Bits 31..0 : Pointer to event register. Accepts only addresses to registers from the Event group. */
+#define PPI_CH_EEP_EEP_Pos (0UL) /*!< Position of EEP field. */
+#define PPI_CH_EEP_EEP_Msk (0xFFFFFFFFUL << PPI_CH_EEP_EEP_Pos) /*!< Bit mask of EEP field. */
+
+/* Register: PPI_CH_TEP */
+/* Description: Description cluster[0]: Channel 0 task end-point */
+
+/* Bits 31..0 : Pointer to task register. Accepts only addresses to registers from the Task group. */
+#define PPI_CH_TEP_TEP_Pos (0UL) /*!< Position of TEP field. */
+#define PPI_CH_TEP_TEP_Msk (0xFFFFFFFFUL << PPI_CH_TEP_TEP_Pos) /*!< Bit mask of TEP field. */
+
+/* Register: PPI_CHG */
+/* Description: Description collection[0]: Channel group 0 */
+
+/* Bit 31 : Include or exclude channel 31 */
+#define PPI_CHG_CH31_Pos (31UL) /*!< Position of CH31 field. */
+#define PPI_CHG_CH31_Msk (0x1UL << PPI_CHG_CH31_Pos) /*!< Bit mask of CH31 field. */
+#define PPI_CHG_CH31_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH31_Included (1UL) /*!< Include */
+
+/* Bit 30 : Include or exclude channel 30 */
+#define PPI_CHG_CH30_Pos (30UL) /*!< Position of CH30 field. */
+#define PPI_CHG_CH30_Msk (0x1UL << PPI_CHG_CH30_Pos) /*!< Bit mask of CH30 field. */
+#define PPI_CHG_CH30_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH30_Included (1UL) /*!< Include */
+
+/* Bit 29 : Include or exclude channel 29 */
+#define PPI_CHG_CH29_Pos (29UL) /*!< Position of CH29 field. */
+#define PPI_CHG_CH29_Msk (0x1UL << PPI_CHG_CH29_Pos) /*!< Bit mask of CH29 field. */
+#define PPI_CHG_CH29_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH29_Included (1UL) /*!< Include */
+
+/* Bit 28 : Include or exclude channel 28 */
+#define PPI_CHG_CH28_Pos (28UL) /*!< Position of CH28 field. */
+#define PPI_CHG_CH28_Msk (0x1UL << PPI_CHG_CH28_Pos) /*!< Bit mask of CH28 field. */
+#define PPI_CHG_CH28_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH28_Included (1UL) /*!< Include */
+
+/* Bit 27 : Include or exclude channel 27 */
+#define PPI_CHG_CH27_Pos (27UL) /*!< Position of CH27 field. */
+#define PPI_CHG_CH27_Msk (0x1UL << PPI_CHG_CH27_Pos) /*!< Bit mask of CH27 field. */
+#define PPI_CHG_CH27_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH27_Included (1UL) /*!< Include */
+
+/* Bit 26 : Include or exclude channel 26 */
+#define PPI_CHG_CH26_Pos (26UL) /*!< Position of CH26 field. */
+#define PPI_CHG_CH26_Msk (0x1UL << PPI_CHG_CH26_Pos) /*!< Bit mask of CH26 field. */
+#define PPI_CHG_CH26_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH26_Included (1UL) /*!< Include */
+
+/* Bit 25 : Include or exclude channel 25 */
+#define PPI_CHG_CH25_Pos (25UL) /*!< Position of CH25 field. */
+#define PPI_CHG_CH25_Msk (0x1UL << PPI_CHG_CH25_Pos) /*!< Bit mask of CH25 field. */
+#define PPI_CHG_CH25_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH25_Included (1UL) /*!< Include */
+
+/* Bit 24 : Include or exclude channel 24 */
+#define PPI_CHG_CH24_Pos (24UL) /*!< Position of CH24 field. */
+#define PPI_CHG_CH24_Msk (0x1UL << PPI_CHG_CH24_Pos) /*!< Bit mask of CH24 field. */
+#define PPI_CHG_CH24_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH24_Included (1UL) /*!< Include */
+
+/* Bit 23 : Include or exclude channel 23 */
+#define PPI_CHG_CH23_Pos (23UL) /*!< Position of CH23 field. */
+#define PPI_CHG_CH23_Msk (0x1UL << PPI_CHG_CH23_Pos) /*!< Bit mask of CH23 field. */
+#define PPI_CHG_CH23_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH23_Included (1UL) /*!< Include */
+
+/* Bit 22 : Include or exclude channel 22 */
+#define PPI_CHG_CH22_Pos (22UL) /*!< Position of CH22 field. */
+#define PPI_CHG_CH22_Msk (0x1UL << PPI_CHG_CH22_Pos) /*!< Bit mask of CH22 field. */
+#define PPI_CHG_CH22_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH22_Included (1UL) /*!< Include */
+
+/* Bit 21 : Include or exclude channel 21 */
+#define PPI_CHG_CH21_Pos (21UL) /*!< Position of CH21 field. */
+#define PPI_CHG_CH21_Msk (0x1UL << PPI_CHG_CH21_Pos) /*!< Bit mask of CH21 field. */
+#define PPI_CHG_CH21_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH21_Included (1UL) /*!< Include */
+
+/* Bit 20 : Include or exclude channel 20 */
+#define PPI_CHG_CH20_Pos (20UL) /*!< Position of CH20 field. */
+#define PPI_CHG_CH20_Msk (0x1UL << PPI_CHG_CH20_Pos) /*!< Bit mask of CH20 field. */
+#define PPI_CHG_CH20_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH20_Included (1UL) /*!< Include */
+
+/* Bit 19 : Include or exclude channel 19 */
+#define PPI_CHG_CH19_Pos (19UL) /*!< Position of CH19 field. */
+#define PPI_CHG_CH19_Msk (0x1UL << PPI_CHG_CH19_Pos) /*!< Bit mask of CH19 field. */
+#define PPI_CHG_CH19_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH19_Included (1UL) /*!< Include */
+
+/* Bit 18 : Include or exclude channel 18 */
+#define PPI_CHG_CH18_Pos (18UL) /*!< Position of CH18 field. */
+#define PPI_CHG_CH18_Msk (0x1UL << PPI_CHG_CH18_Pos) /*!< Bit mask of CH18 field. */
+#define PPI_CHG_CH18_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH18_Included (1UL) /*!< Include */
+
+/* Bit 17 : Include or exclude channel 17 */
+#define PPI_CHG_CH17_Pos (17UL) /*!< Position of CH17 field. */
+#define PPI_CHG_CH17_Msk (0x1UL << PPI_CHG_CH17_Pos) /*!< Bit mask of CH17 field. */
+#define PPI_CHG_CH17_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH17_Included (1UL) /*!< Include */
+
+/* Bit 16 : Include or exclude channel 16 */
+#define PPI_CHG_CH16_Pos (16UL) /*!< Position of CH16 field. */
+#define PPI_CHG_CH16_Msk (0x1UL << PPI_CHG_CH16_Pos) /*!< Bit mask of CH16 field. */
+#define PPI_CHG_CH16_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH16_Included (1UL) /*!< Include */
+
+/* Bit 15 : Include or exclude channel 15 */
+#define PPI_CHG_CH15_Pos (15UL) /*!< Position of CH15 field. */
+#define PPI_CHG_CH15_Msk (0x1UL << PPI_CHG_CH15_Pos) /*!< Bit mask of CH15 field. */
+#define PPI_CHG_CH15_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH15_Included (1UL) /*!< Include */
+
+/* Bit 14 : Include or exclude channel 14 */
+#define PPI_CHG_CH14_Pos (14UL) /*!< Position of CH14 field. */
+#define PPI_CHG_CH14_Msk (0x1UL << PPI_CHG_CH14_Pos) /*!< Bit mask of CH14 field. */
+#define PPI_CHG_CH14_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH14_Included (1UL) /*!< Include */
+
+/* Bit 13 : Include or exclude channel 13 */
+#define PPI_CHG_CH13_Pos (13UL) /*!< Position of CH13 field. */
+#define PPI_CHG_CH13_Msk (0x1UL << PPI_CHG_CH13_Pos) /*!< Bit mask of CH13 field. */
+#define PPI_CHG_CH13_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH13_Included (1UL) /*!< Include */
+
+/* Bit 12 : Include or exclude channel 12 */
+#define PPI_CHG_CH12_Pos (12UL) /*!< Position of CH12 field. */
+#define PPI_CHG_CH12_Msk (0x1UL << PPI_CHG_CH12_Pos) /*!< Bit mask of CH12 field. */
+#define PPI_CHG_CH12_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH12_Included (1UL) /*!< Include */
+
+/* Bit 11 : Include or exclude channel 11 */
+#define PPI_CHG_CH11_Pos (11UL) /*!< Position of CH11 field. */
+#define PPI_CHG_CH11_Msk (0x1UL << PPI_CHG_CH11_Pos) /*!< Bit mask of CH11 field. */
+#define PPI_CHG_CH11_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH11_Included (1UL) /*!< Include */
+
+/* Bit 10 : Include or exclude channel 10 */
+#define PPI_CHG_CH10_Pos (10UL) /*!< Position of CH10 field. */
+#define PPI_CHG_CH10_Msk (0x1UL << PPI_CHG_CH10_Pos) /*!< Bit mask of CH10 field. */
+#define PPI_CHG_CH10_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH10_Included (1UL) /*!< Include */
+
+/* Bit 9 : Include or exclude channel 9 */
+#define PPI_CHG_CH9_Pos (9UL) /*!< Position of CH9 field. */
+#define PPI_CHG_CH9_Msk (0x1UL << PPI_CHG_CH9_Pos) /*!< Bit mask of CH9 field. */
+#define PPI_CHG_CH9_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH9_Included (1UL) /*!< Include */
+
+/* Bit 8 : Include or exclude channel 8 */
+#define PPI_CHG_CH8_Pos (8UL) /*!< Position of CH8 field. */
+#define PPI_CHG_CH8_Msk (0x1UL << PPI_CHG_CH8_Pos) /*!< Bit mask of CH8 field. */
+#define PPI_CHG_CH8_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH8_Included (1UL) /*!< Include */
+
+/* Bit 7 : Include or exclude channel 7 */
+#define PPI_CHG_CH7_Pos (7UL) /*!< Position of CH7 field. */
+#define PPI_CHG_CH7_Msk (0x1UL << PPI_CHG_CH7_Pos) /*!< Bit mask of CH7 field. */
+#define PPI_CHG_CH7_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH7_Included (1UL) /*!< Include */
+
+/* Bit 6 : Include or exclude channel 6 */
+#define PPI_CHG_CH6_Pos (6UL) /*!< Position of CH6 field. */
+#define PPI_CHG_CH6_Msk (0x1UL << PPI_CHG_CH6_Pos) /*!< Bit mask of CH6 field. */
+#define PPI_CHG_CH6_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH6_Included (1UL) /*!< Include */
+
+/* Bit 5 : Include or exclude channel 5 */
+#define PPI_CHG_CH5_Pos (5UL) /*!< Position of CH5 field. */
+#define PPI_CHG_CH5_Msk (0x1UL << PPI_CHG_CH5_Pos) /*!< Bit mask of CH5 field. */
+#define PPI_CHG_CH5_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH5_Included (1UL) /*!< Include */
+
+/* Bit 4 : Include or exclude channel 4 */
+#define PPI_CHG_CH4_Pos (4UL) /*!< Position of CH4 field. */
+#define PPI_CHG_CH4_Msk (0x1UL << PPI_CHG_CH4_Pos) /*!< Bit mask of CH4 field. */
+#define PPI_CHG_CH4_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH4_Included (1UL) /*!< Include */
+
+/* Bit 3 : Include or exclude channel 3 */
+#define PPI_CHG_CH3_Pos (3UL) /*!< Position of CH3 field. */
+#define PPI_CHG_CH3_Msk (0x1UL << PPI_CHG_CH3_Pos) /*!< Bit mask of CH3 field. */
+#define PPI_CHG_CH3_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH3_Included (1UL) /*!< Include */
+
+/* Bit 2 : Include or exclude channel 2 */
+#define PPI_CHG_CH2_Pos (2UL) /*!< Position of CH2 field. */
+#define PPI_CHG_CH2_Msk (0x1UL << PPI_CHG_CH2_Pos) /*!< Bit mask of CH2 field. */
+#define PPI_CHG_CH2_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH2_Included (1UL) /*!< Include */
+
+/* Bit 1 : Include or exclude channel 1 */
+#define PPI_CHG_CH1_Pos (1UL) /*!< Position of CH1 field. */
+#define PPI_CHG_CH1_Msk (0x1UL << PPI_CHG_CH1_Pos) /*!< Bit mask of CH1 field. */
+#define PPI_CHG_CH1_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH1_Included (1UL) /*!< Include */
+
+/* Bit 0 : Include or exclude channel 0 */
+#define PPI_CHG_CH0_Pos (0UL) /*!< Position of CH0 field. */
+#define PPI_CHG_CH0_Msk (0x1UL << PPI_CHG_CH0_Pos) /*!< Bit mask of CH0 field. */
+#define PPI_CHG_CH0_Excluded (0UL) /*!< Exclude */
+#define PPI_CHG_CH0_Included (1UL) /*!< Include */
+
+/* Register: PPI_FORK_TEP */
+/* Description: Description cluster[0]: Channel 0 task end-point */
+
+/* Bits 31..0 : Pointer to task register */
+#define PPI_FORK_TEP_TEP_Pos (0UL) /*!< Position of TEP field. */
+#define PPI_FORK_TEP_TEP_Msk (0xFFFFFFFFUL << PPI_FORK_TEP_TEP_Pos) /*!< Bit mask of TEP field. */
+
+
+/* Peripheral: PWM */
+/* Description: Pulse Width Modulation Unit 0 */
+
+/* Register: PWM_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 4 : Shortcut between LOOPSDONE event and STOP task */
+#define PWM_SHORTS_LOOPSDONE_STOP_Pos (4UL) /*!< Position of LOOPSDONE_STOP field. */
+#define PWM_SHORTS_LOOPSDONE_STOP_Msk (0x1UL << PWM_SHORTS_LOOPSDONE_STOP_Pos) /*!< Bit mask of LOOPSDONE_STOP field. */
+#define PWM_SHORTS_LOOPSDONE_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define PWM_SHORTS_LOOPSDONE_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 3 : Shortcut between LOOPSDONE event and SEQSTART[1] task */
+#define PWM_SHORTS_LOOPSDONE_SEQSTART1_Pos (3UL) /*!< Position of LOOPSDONE_SEQSTART1 field. */
+#define PWM_SHORTS_LOOPSDONE_SEQSTART1_Msk (0x1UL << PWM_SHORTS_LOOPSDONE_SEQSTART1_Pos) /*!< Bit mask of LOOPSDONE_SEQSTART1 field. */
+#define PWM_SHORTS_LOOPSDONE_SEQSTART1_Disabled (0UL) /*!< Disable shortcut */
+#define PWM_SHORTS_LOOPSDONE_SEQSTART1_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 2 : Shortcut between LOOPSDONE event and SEQSTART[0] task */
+#define PWM_SHORTS_LOOPSDONE_SEQSTART0_Pos (2UL) /*!< Position of LOOPSDONE_SEQSTART0 field. */
+#define PWM_SHORTS_LOOPSDONE_SEQSTART0_Msk (0x1UL << PWM_SHORTS_LOOPSDONE_SEQSTART0_Pos) /*!< Bit mask of LOOPSDONE_SEQSTART0 field. */
+#define PWM_SHORTS_LOOPSDONE_SEQSTART0_Disabled (0UL) /*!< Disable shortcut */
+#define PWM_SHORTS_LOOPSDONE_SEQSTART0_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 1 : Shortcut between SEQEND[1] event and STOP task */
+#define PWM_SHORTS_SEQEND1_STOP_Pos (1UL) /*!< Position of SEQEND1_STOP field. */
+#define PWM_SHORTS_SEQEND1_STOP_Msk (0x1UL << PWM_SHORTS_SEQEND1_STOP_Pos) /*!< Bit mask of SEQEND1_STOP field. */
+#define PWM_SHORTS_SEQEND1_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define PWM_SHORTS_SEQEND1_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 0 : Shortcut between SEQEND[0] event and STOP task */
+#define PWM_SHORTS_SEQEND0_STOP_Pos (0UL) /*!< Position of SEQEND0_STOP field. */
+#define PWM_SHORTS_SEQEND0_STOP_Msk (0x1UL << PWM_SHORTS_SEQEND0_STOP_Pos) /*!< Bit mask of SEQEND0_STOP field. */
+#define PWM_SHORTS_SEQEND0_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define PWM_SHORTS_SEQEND0_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: PWM_INTEN */
+/* Description: Enable or disable interrupt */
+
+/* Bit 7 : Enable or disable interrupt for LOOPSDONE event */
+#define PWM_INTEN_LOOPSDONE_Pos (7UL) /*!< Position of LOOPSDONE field. */
+#define PWM_INTEN_LOOPSDONE_Msk (0x1UL << PWM_INTEN_LOOPSDONE_Pos) /*!< Bit mask of LOOPSDONE field. */
+#define PWM_INTEN_LOOPSDONE_Disabled (0UL) /*!< Disable */
+#define PWM_INTEN_LOOPSDONE_Enabled (1UL) /*!< Enable */
+
+/* Bit 6 : Enable or disable interrupt for PWMPERIODEND event */
+#define PWM_INTEN_PWMPERIODEND_Pos (6UL) /*!< Position of PWMPERIODEND field. */
+#define PWM_INTEN_PWMPERIODEND_Msk (0x1UL << PWM_INTEN_PWMPERIODEND_Pos) /*!< Bit mask of PWMPERIODEND field. */
+#define PWM_INTEN_PWMPERIODEND_Disabled (0UL) /*!< Disable */
+#define PWM_INTEN_PWMPERIODEND_Enabled (1UL) /*!< Enable */
+
+/* Bit 5 : Enable or disable interrupt for SEQEND[1] event */
+#define PWM_INTEN_SEQEND1_Pos (5UL) /*!< Position of SEQEND1 field. */
+#define PWM_INTEN_SEQEND1_Msk (0x1UL << PWM_INTEN_SEQEND1_Pos) /*!< Bit mask of SEQEND1 field. */
+#define PWM_INTEN_SEQEND1_Disabled (0UL) /*!< Disable */
+#define PWM_INTEN_SEQEND1_Enabled (1UL) /*!< Enable */
+
+/* Bit 4 : Enable or disable interrupt for SEQEND[0] event */
+#define PWM_INTEN_SEQEND0_Pos (4UL) /*!< Position of SEQEND0 field. */
+#define PWM_INTEN_SEQEND0_Msk (0x1UL << PWM_INTEN_SEQEND0_Pos) /*!< Bit mask of SEQEND0 field. */
+#define PWM_INTEN_SEQEND0_Disabled (0UL) /*!< Disable */
+#define PWM_INTEN_SEQEND0_Enabled (1UL) /*!< Enable */
+
+/* Bit 3 : Enable or disable interrupt for SEQSTARTED[1] event */
+#define PWM_INTEN_SEQSTARTED1_Pos (3UL) /*!< Position of SEQSTARTED1 field. */
+#define PWM_INTEN_SEQSTARTED1_Msk (0x1UL << PWM_INTEN_SEQSTARTED1_Pos) /*!< Bit mask of SEQSTARTED1 field. */
+#define PWM_INTEN_SEQSTARTED1_Disabled (0UL) /*!< Disable */
+#define PWM_INTEN_SEQSTARTED1_Enabled (1UL) /*!< Enable */
+
+/* Bit 2 : Enable or disable interrupt for SEQSTARTED[0] event */
+#define PWM_INTEN_SEQSTARTED0_Pos (2UL) /*!< Position of SEQSTARTED0 field. */
+#define PWM_INTEN_SEQSTARTED0_Msk (0x1UL << PWM_INTEN_SEQSTARTED0_Pos) /*!< Bit mask of SEQSTARTED0 field. */
+#define PWM_INTEN_SEQSTARTED0_Disabled (0UL) /*!< Disable */
+#define PWM_INTEN_SEQSTARTED0_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable interrupt for STOPPED event */
+#define PWM_INTEN_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define PWM_INTEN_STOPPED_Msk (0x1UL << PWM_INTEN_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define PWM_INTEN_STOPPED_Disabled (0UL) /*!< Disable */
+#define PWM_INTEN_STOPPED_Enabled (1UL) /*!< Enable */
+
+/* Register: PWM_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 7 : Write '1' to Enable interrupt for LOOPSDONE event */
+#define PWM_INTENSET_LOOPSDONE_Pos (7UL) /*!< Position of LOOPSDONE field. */
+#define PWM_INTENSET_LOOPSDONE_Msk (0x1UL << PWM_INTENSET_LOOPSDONE_Pos) /*!< Bit mask of LOOPSDONE field. */
+#define PWM_INTENSET_LOOPSDONE_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENSET_LOOPSDONE_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENSET_LOOPSDONE_Set (1UL) /*!< Enable */
+
+/* Bit 6 : Write '1' to Enable interrupt for PWMPERIODEND event */
+#define PWM_INTENSET_PWMPERIODEND_Pos (6UL) /*!< Position of PWMPERIODEND field. */
+#define PWM_INTENSET_PWMPERIODEND_Msk (0x1UL << PWM_INTENSET_PWMPERIODEND_Pos) /*!< Bit mask of PWMPERIODEND field. */
+#define PWM_INTENSET_PWMPERIODEND_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENSET_PWMPERIODEND_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENSET_PWMPERIODEND_Set (1UL) /*!< Enable */
+
+/* Bit 5 : Write '1' to Enable interrupt for SEQEND[1] event */
+#define PWM_INTENSET_SEQEND1_Pos (5UL) /*!< Position of SEQEND1 field. */
+#define PWM_INTENSET_SEQEND1_Msk (0x1UL << PWM_INTENSET_SEQEND1_Pos) /*!< Bit mask of SEQEND1 field. */
+#define PWM_INTENSET_SEQEND1_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENSET_SEQEND1_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENSET_SEQEND1_Set (1UL) /*!< Enable */
+
+/* Bit 4 : Write '1' to Enable interrupt for SEQEND[0] event */
+#define PWM_INTENSET_SEQEND0_Pos (4UL) /*!< Position of SEQEND0 field. */
+#define PWM_INTENSET_SEQEND0_Msk (0x1UL << PWM_INTENSET_SEQEND0_Pos) /*!< Bit mask of SEQEND0 field. */
+#define PWM_INTENSET_SEQEND0_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENSET_SEQEND0_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENSET_SEQEND0_Set (1UL) /*!< Enable */
+
+/* Bit 3 : Write '1' to Enable interrupt for SEQSTARTED[1] event */
+#define PWM_INTENSET_SEQSTARTED1_Pos (3UL) /*!< Position of SEQSTARTED1 field. */
+#define PWM_INTENSET_SEQSTARTED1_Msk (0x1UL << PWM_INTENSET_SEQSTARTED1_Pos) /*!< Bit mask of SEQSTARTED1 field. */
+#define PWM_INTENSET_SEQSTARTED1_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENSET_SEQSTARTED1_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENSET_SEQSTARTED1_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for SEQSTARTED[0] event */
+#define PWM_INTENSET_SEQSTARTED0_Pos (2UL) /*!< Position of SEQSTARTED0 field. */
+#define PWM_INTENSET_SEQSTARTED0_Msk (0x1UL << PWM_INTENSET_SEQSTARTED0_Pos) /*!< Bit mask of SEQSTARTED0 field. */
+#define PWM_INTENSET_SEQSTARTED0_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENSET_SEQSTARTED0_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENSET_SEQSTARTED0_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for STOPPED event */
+#define PWM_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define PWM_INTENSET_STOPPED_Msk (0x1UL << PWM_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define PWM_INTENSET_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENSET_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENSET_STOPPED_Set (1UL) /*!< Enable */
+
+/* Register: PWM_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 7 : Write '1' to Disable interrupt for LOOPSDONE event */
+#define PWM_INTENCLR_LOOPSDONE_Pos (7UL) /*!< Position of LOOPSDONE field. */
+#define PWM_INTENCLR_LOOPSDONE_Msk (0x1UL << PWM_INTENCLR_LOOPSDONE_Pos) /*!< Bit mask of LOOPSDONE field. */
+#define PWM_INTENCLR_LOOPSDONE_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENCLR_LOOPSDONE_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENCLR_LOOPSDONE_Clear (1UL) /*!< Disable */
+
+/* Bit 6 : Write '1' to Disable interrupt for PWMPERIODEND event */
+#define PWM_INTENCLR_PWMPERIODEND_Pos (6UL) /*!< Position of PWMPERIODEND field. */
+#define PWM_INTENCLR_PWMPERIODEND_Msk (0x1UL << PWM_INTENCLR_PWMPERIODEND_Pos) /*!< Bit mask of PWMPERIODEND field. */
+#define PWM_INTENCLR_PWMPERIODEND_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENCLR_PWMPERIODEND_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENCLR_PWMPERIODEND_Clear (1UL) /*!< Disable */
+
+/* Bit 5 : Write '1' to Disable interrupt for SEQEND[1] event */
+#define PWM_INTENCLR_SEQEND1_Pos (5UL) /*!< Position of SEQEND1 field. */
+#define PWM_INTENCLR_SEQEND1_Msk (0x1UL << PWM_INTENCLR_SEQEND1_Pos) /*!< Bit mask of SEQEND1 field. */
+#define PWM_INTENCLR_SEQEND1_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENCLR_SEQEND1_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENCLR_SEQEND1_Clear (1UL) /*!< Disable */
+
+/* Bit 4 : Write '1' to Disable interrupt for SEQEND[0] event */
+#define PWM_INTENCLR_SEQEND0_Pos (4UL) /*!< Position of SEQEND0 field. */
+#define PWM_INTENCLR_SEQEND0_Msk (0x1UL << PWM_INTENCLR_SEQEND0_Pos) /*!< Bit mask of SEQEND0 field. */
+#define PWM_INTENCLR_SEQEND0_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENCLR_SEQEND0_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENCLR_SEQEND0_Clear (1UL) /*!< Disable */
+
+/* Bit 3 : Write '1' to Disable interrupt for SEQSTARTED[1] event */
+#define PWM_INTENCLR_SEQSTARTED1_Pos (3UL) /*!< Position of SEQSTARTED1 field. */
+#define PWM_INTENCLR_SEQSTARTED1_Msk (0x1UL << PWM_INTENCLR_SEQSTARTED1_Pos) /*!< Bit mask of SEQSTARTED1 field. */
+#define PWM_INTENCLR_SEQSTARTED1_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENCLR_SEQSTARTED1_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENCLR_SEQSTARTED1_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for SEQSTARTED[0] event */
+#define PWM_INTENCLR_SEQSTARTED0_Pos (2UL) /*!< Position of SEQSTARTED0 field. */
+#define PWM_INTENCLR_SEQSTARTED0_Msk (0x1UL << PWM_INTENCLR_SEQSTARTED0_Pos) /*!< Bit mask of SEQSTARTED0 field. */
+#define PWM_INTENCLR_SEQSTARTED0_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENCLR_SEQSTARTED0_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENCLR_SEQSTARTED0_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for STOPPED event */
+#define PWM_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define PWM_INTENCLR_STOPPED_Msk (0x1UL << PWM_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define PWM_INTENCLR_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define PWM_INTENCLR_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define PWM_INTENCLR_STOPPED_Clear (1UL) /*!< Disable */
+
+/* Register: PWM_ENABLE */
+/* Description: PWM module enable register */
+
+/* Bit 0 : Enable or disable PWM module */
+#define PWM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define PWM_ENABLE_ENABLE_Msk (0x1UL << PWM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define PWM_ENABLE_ENABLE_Disabled (0UL) /*!< Disabled */
+#define PWM_ENABLE_ENABLE_Enabled (1UL) /*!< Enable */
+
+/* Register: PWM_MODE */
+/* Description: Selects operating mode of the wave counter */
+
+/* Bit 0 : Selects up or up and down as wave counter mode */
+#define PWM_MODE_UPDOWN_Pos (0UL) /*!< Position of UPDOWN field. */
+#define PWM_MODE_UPDOWN_Msk (0x1UL << PWM_MODE_UPDOWN_Pos) /*!< Bit mask of UPDOWN field. */
+#define PWM_MODE_UPDOWN_Up (0UL) /*!< Up counter - edge aligned PWM duty-cycle */
+#define PWM_MODE_UPDOWN_UpAndDown (1UL) /*!< Up and down counter - center aligned PWM duty cycle */
+
+/* Register: PWM_COUNTERTOP */
+/* Description: Value up to which the pulse generator counter counts */
+
+/* Bits 14..0 : Value up to which the pulse generator counter counts. This register is ignored when DECODER.MODE=WaveForm and only values from RAM will be used. */
+#define PWM_COUNTERTOP_COUNTERTOP_Pos (0UL) /*!< Position of COUNTERTOP field. */
+#define PWM_COUNTERTOP_COUNTERTOP_Msk (0x7FFFUL << PWM_COUNTERTOP_COUNTERTOP_Pos) /*!< Bit mask of COUNTERTOP field. */
+
+/* Register: PWM_PRESCALER */
+/* Description: Configuration for PWM_CLK */
+
+/* Bits 2..0 : Pre-scaler of PWM_CLK */
+#define PWM_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */
+#define PWM_PRESCALER_PRESCALER_Msk (0x7UL << PWM_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */
+#define PWM_PRESCALER_PRESCALER_DIV_1 (0UL) /*!< Divide by 1 (16MHz) */
+#define PWM_PRESCALER_PRESCALER_DIV_2 (1UL) /*!< Divide by 2 ( 8MHz) */
+#define PWM_PRESCALER_PRESCALER_DIV_4 (2UL) /*!< Divide by 4 ( 4MHz) */
+#define PWM_PRESCALER_PRESCALER_DIV_8 (3UL) /*!< Divide by 8 ( 2MHz) */
+#define PWM_PRESCALER_PRESCALER_DIV_16 (4UL) /*!< Divide by 16 ( 1MHz) */
+#define PWM_PRESCALER_PRESCALER_DIV_32 (5UL) /*!< Divide by 32 ( 500kHz) */
+#define PWM_PRESCALER_PRESCALER_DIV_64 (6UL) /*!< Divide by 64 ( 250kHz) */
+#define PWM_PRESCALER_PRESCALER_DIV_128 (7UL) /*!< Divide by 128 ( 125kHz) */
+
+/* Register: PWM_DECODER */
+/* Description: Configuration of the decoder */
+
+/* Bit 8 : Selects source for advancing the active sequence */
+#define PWM_DECODER_MODE_Pos (8UL) /*!< Position of MODE field. */
+#define PWM_DECODER_MODE_Msk (0x1UL << PWM_DECODER_MODE_Pos) /*!< Bit mask of MODE field. */
+#define PWM_DECODER_MODE_RefreshCount (0UL) /*!< SEQ[n].REFRESH is used to determine loading internal compare registers */
+#define PWM_DECODER_MODE_NextStep (1UL) /*!< NEXTSTEP task causes a new value to be loaded to internal compare registers */
+
+/* Bits 2..0 : How a sequence is read from RAM and spread to the compare register */
+#define PWM_DECODER_LOAD_Pos (0UL) /*!< Position of LOAD field. */
+#define PWM_DECODER_LOAD_Msk (0x7UL << PWM_DECODER_LOAD_Pos) /*!< Bit mask of LOAD field. */
+#define PWM_DECODER_LOAD_Common (0UL) /*!< 1st half word (16-bit) used in all PWM channels 0..3 */
+#define PWM_DECODER_LOAD_Grouped (1UL) /*!< 1st half word (16-bit) used in channel 0..1; 2nd word in channel 2..3 */
+#define PWM_DECODER_LOAD_Individual (2UL) /*!< 1st half word (16-bit) in ch.0; 2nd in ch.1; ...; 4th in ch.3 */
+#define PWM_DECODER_LOAD_WaveForm (3UL) /*!< 1st half word (16-bit) in ch.0; 2nd in ch.1; ...; 4th in COUNTERTOP */
+
+/* Register: PWM_LOOP */
+/* Description: Amount of playback of a loop */
+
+/* Bits 15..0 : Amount of playback of pattern cycles */
+#define PWM_LOOP_CNT_Pos (0UL) /*!< Position of CNT field. */
+#define PWM_LOOP_CNT_Msk (0xFFFFUL << PWM_LOOP_CNT_Pos) /*!< Bit mask of CNT field. */
+#define PWM_LOOP_CNT_Disabled (0UL) /*!< Looping disabled (stop at the end of the sequence) */
+
+/* Register: PWM_SEQ_PTR */
+/* Description: Description cluster[0]: Beginning address in Data RAM of sequence A */
+
+/* Bits 31..0 : Beginning address in Data RAM of sequence A */
+#define PWM_SEQ_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define PWM_SEQ_PTR_PTR_Msk (0xFFFFFFFFUL << PWM_SEQ_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: PWM_SEQ_CNT */
+/* Description: Description cluster[0]: Amount of values (duty cycles) in sequence A */
+
+/* Bits 14..0 : Amount of values (duty cycles) in sequence A */
+#define PWM_SEQ_CNT_CNT_Pos (0UL) /*!< Position of CNT field. */
+#define PWM_SEQ_CNT_CNT_Msk (0x7FFFUL << PWM_SEQ_CNT_CNT_Pos) /*!< Bit mask of CNT field. */
+#define PWM_SEQ_CNT_CNT_Disabled (0UL) /*!< Sequence is disabled, and shall not be started as it is empty */
+
+/* Register: PWM_SEQ_REFRESH */
+/* Description: Description cluster[0]: Amount of additional PWM periods between samples loaded to compare register (load every CNT+1 PWM periods) */
+
+/* Bits 23..0 : Amount of additional PWM periods between samples loaded to compare register (load every CNT+1 PWM periods) */
+#define PWM_SEQ_REFRESH_CNT_Pos (0UL) /*!< Position of CNT field. */
+#define PWM_SEQ_REFRESH_CNT_Msk (0xFFFFFFUL << PWM_SEQ_REFRESH_CNT_Pos) /*!< Bit mask of CNT field. */
+#define PWM_SEQ_REFRESH_CNT_Continuous (0UL) /*!< Update every PWM period */
+
+/* Register: PWM_SEQ_ENDDELAY */
+/* Description: Description cluster[0]: Time added after the sequence */
+
+/* Bits 23..0 : Time added after the sequence in PWM periods */
+#define PWM_SEQ_ENDDELAY_CNT_Pos (0UL) /*!< Position of CNT field. */
+#define PWM_SEQ_ENDDELAY_CNT_Msk (0xFFFFFFUL << PWM_SEQ_ENDDELAY_CNT_Pos) /*!< Bit mask of CNT field. */
+
+/* Register: PWM_PSEL_OUT */
+/* Description: Description collection[0]: Output pin select for PWM channel 0 */
+
+/* Bit 31 : Connection */
+#define PWM_PSEL_OUT_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define PWM_PSEL_OUT_CONNECT_Msk (0x1UL << PWM_PSEL_OUT_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define PWM_PSEL_OUT_CONNECT_Connected (0UL) /*!< Connect */
+#define PWM_PSEL_OUT_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define PWM_PSEL_OUT_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define PWM_PSEL_OUT_PIN_Msk (0x1FUL << PWM_PSEL_OUT_PIN_Pos) /*!< Bit mask of PIN field. */
+
+
+/* Peripheral: QDEC */
+/* Description: Quadrature Decoder */
+
+/* Register: QDEC_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 6 : Shortcut between SAMPLERDY event and READCLRACC task */
+#define QDEC_SHORTS_SAMPLERDY_READCLRACC_Pos (6UL) /*!< Position of SAMPLERDY_READCLRACC field. */
+#define QDEC_SHORTS_SAMPLERDY_READCLRACC_Msk (0x1UL << QDEC_SHORTS_SAMPLERDY_READCLRACC_Pos) /*!< Bit mask of SAMPLERDY_READCLRACC field. */
+#define QDEC_SHORTS_SAMPLERDY_READCLRACC_Disabled (0UL) /*!< Disable shortcut */
+#define QDEC_SHORTS_SAMPLERDY_READCLRACC_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 5 : Shortcut between DBLRDY event and STOP task */
+#define QDEC_SHORTS_DBLRDY_STOP_Pos (5UL) /*!< Position of DBLRDY_STOP field. */
+#define QDEC_SHORTS_DBLRDY_STOP_Msk (0x1UL << QDEC_SHORTS_DBLRDY_STOP_Pos) /*!< Bit mask of DBLRDY_STOP field. */
+#define QDEC_SHORTS_DBLRDY_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define QDEC_SHORTS_DBLRDY_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 4 : Shortcut between DBLRDY event and RDCLRDBL task */
+#define QDEC_SHORTS_DBLRDY_RDCLRDBL_Pos (4UL) /*!< Position of DBLRDY_RDCLRDBL field. */
+#define QDEC_SHORTS_DBLRDY_RDCLRDBL_Msk (0x1UL << QDEC_SHORTS_DBLRDY_RDCLRDBL_Pos) /*!< Bit mask of DBLRDY_RDCLRDBL field. */
+#define QDEC_SHORTS_DBLRDY_RDCLRDBL_Disabled (0UL) /*!< Disable shortcut */
+#define QDEC_SHORTS_DBLRDY_RDCLRDBL_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 3 : Shortcut between REPORTRDY event and STOP task */
+#define QDEC_SHORTS_REPORTRDY_STOP_Pos (3UL) /*!< Position of REPORTRDY_STOP field. */
+#define QDEC_SHORTS_REPORTRDY_STOP_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_STOP_Pos) /*!< Bit mask of REPORTRDY_STOP field. */
+#define QDEC_SHORTS_REPORTRDY_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define QDEC_SHORTS_REPORTRDY_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 2 : Shortcut between REPORTRDY event and RDCLRACC task */
+#define QDEC_SHORTS_REPORTRDY_RDCLRACC_Pos (2UL) /*!< Position of REPORTRDY_RDCLRACC field. */
+#define QDEC_SHORTS_REPORTRDY_RDCLRACC_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_RDCLRACC_Pos) /*!< Bit mask of REPORTRDY_RDCLRACC field. */
+#define QDEC_SHORTS_REPORTRDY_RDCLRACC_Disabled (0UL) /*!< Disable shortcut */
+#define QDEC_SHORTS_REPORTRDY_RDCLRACC_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 1 : Shortcut between SAMPLERDY event and STOP task */
+#define QDEC_SHORTS_SAMPLERDY_STOP_Pos (1UL) /*!< Position of SAMPLERDY_STOP field. */
+#define QDEC_SHORTS_SAMPLERDY_STOP_Msk (0x1UL << QDEC_SHORTS_SAMPLERDY_STOP_Pos) /*!< Bit mask of SAMPLERDY_STOP field. */
+#define QDEC_SHORTS_SAMPLERDY_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define QDEC_SHORTS_SAMPLERDY_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 0 : Shortcut between REPORTRDY event and READCLRACC task */
+#define QDEC_SHORTS_REPORTRDY_READCLRACC_Pos (0UL) /*!< Position of REPORTRDY_READCLRACC field. */
+#define QDEC_SHORTS_REPORTRDY_READCLRACC_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_READCLRACC_Pos) /*!< Bit mask of REPORTRDY_READCLRACC field. */
+#define QDEC_SHORTS_REPORTRDY_READCLRACC_Disabled (0UL) /*!< Disable shortcut */
+#define QDEC_SHORTS_REPORTRDY_READCLRACC_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: QDEC_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 4 : Write '1' to Enable interrupt for STOPPED event */
+#define QDEC_INTENSET_STOPPED_Pos (4UL) /*!< Position of STOPPED field. */
+#define QDEC_INTENSET_STOPPED_Msk (0x1UL << QDEC_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define QDEC_INTENSET_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define QDEC_INTENSET_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define QDEC_INTENSET_STOPPED_Set (1UL) /*!< Enable */
+
+/* Bit 3 : Write '1' to Enable interrupt for DBLRDY event */
+#define QDEC_INTENSET_DBLRDY_Pos (3UL) /*!< Position of DBLRDY field. */
+#define QDEC_INTENSET_DBLRDY_Msk (0x1UL << QDEC_INTENSET_DBLRDY_Pos) /*!< Bit mask of DBLRDY field. */
+#define QDEC_INTENSET_DBLRDY_Disabled (0UL) /*!< Read: Disabled */
+#define QDEC_INTENSET_DBLRDY_Enabled (1UL) /*!< Read: Enabled */
+#define QDEC_INTENSET_DBLRDY_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for ACCOF event */
+#define QDEC_INTENSET_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */
+#define QDEC_INTENSET_ACCOF_Msk (0x1UL << QDEC_INTENSET_ACCOF_Pos) /*!< Bit mask of ACCOF field. */
+#define QDEC_INTENSET_ACCOF_Disabled (0UL) /*!< Read: Disabled */
+#define QDEC_INTENSET_ACCOF_Enabled (1UL) /*!< Read: Enabled */
+#define QDEC_INTENSET_ACCOF_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for REPORTRDY event */
+#define QDEC_INTENSET_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */
+#define QDEC_INTENSET_REPORTRDY_Msk (0x1UL << QDEC_INTENSET_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */
+#define QDEC_INTENSET_REPORTRDY_Disabled (0UL) /*!< Read: Disabled */
+#define QDEC_INTENSET_REPORTRDY_Enabled (1UL) /*!< Read: Enabled */
+#define QDEC_INTENSET_REPORTRDY_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for SAMPLERDY event */
+#define QDEC_INTENSET_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */
+#define QDEC_INTENSET_SAMPLERDY_Msk (0x1UL << QDEC_INTENSET_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */
+#define QDEC_INTENSET_SAMPLERDY_Disabled (0UL) /*!< Read: Disabled */
+#define QDEC_INTENSET_SAMPLERDY_Enabled (1UL) /*!< Read: Enabled */
+#define QDEC_INTENSET_SAMPLERDY_Set (1UL) /*!< Enable */
+
+/* Register: QDEC_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 4 : Write '1' to Disable interrupt for STOPPED event */
+#define QDEC_INTENCLR_STOPPED_Pos (4UL) /*!< Position of STOPPED field. */
+#define QDEC_INTENCLR_STOPPED_Msk (0x1UL << QDEC_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define QDEC_INTENCLR_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define QDEC_INTENCLR_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define QDEC_INTENCLR_STOPPED_Clear (1UL) /*!< Disable */
+
+/* Bit 3 : Write '1' to Disable interrupt for DBLRDY event */
+#define QDEC_INTENCLR_DBLRDY_Pos (3UL) /*!< Position of DBLRDY field. */
+#define QDEC_INTENCLR_DBLRDY_Msk (0x1UL << QDEC_INTENCLR_DBLRDY_Pos) /*!< Bit mask of DBLRDY field. */
+#define QDEC_INTENCLR_DBLRDY_Disabled (0UL) /*!< Read: Disabled */
+#define QDEC_INTENCLR_DBLRDY_Enabled (1UL) /*!< Read: Enabled */
+#define QDEC_INTENCLR_DBLRDY_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for ACCOF event */
+#define QDEC_INTENCLR_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */
+#define QDEC_INTENCLR_ACCOF_Msk (0x1UL << QDEC_INTENCLR_ACCOF_Pos) /*!< Bit mask of ACCOF field. */
+#define QDEC_INTENCLR_ACCOF_Disabled (0UL) /*!< Read: Disabled */
+#define QDEC_INTENCLR_ACCOF_Enabled (1UL) /*!< Read: Enabled */
+#define QDEC_INTENCLR_ACCOF_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for REPORTRDY event */
+#define QDEC_INTENCLR_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */
+#define QDEC_INTENCLR_REPORTRDY_Msk (0x1UL << QDEC_INTENCLR_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */
+#define QDEC_INTENCLR_REPORTRDY_Disabled (0UL) /*!< Read: Disabled */
+#define QDEC_INTENCLR_REPORTRDY_Enabled (1UL) /*!< Read: Enabled */
+#define QDEC_INTENCLR_REPORTRDY_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for SAMPLERDY event */
+#define QDEC_INTENCLR_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */
+#define QDEC_INTENCLR_SAMPLERDY_Msk (0x1UL << QDEC_INTENCLR_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */
+#define QDEC_INTENCLR_SAMPLERDY_Disabled (0UL) /*!< Read: Disabled */
+#define QDEC_INTENCLR_SAMPLERDY_Enabled (1UL) /*!< Read: Enabled */
+#define QDEC_INTENCLR_SAMPLERDY_Clear (1UL) /*!< Disable */
+
+/* Register: QDEC_ENABLE */
+/* Description: Enable the quadrature decoder */
+
+/* Bit 0 : Enable or disable the quadrature decoder */
+#define QDEC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define QDEC_ENABLE_ENABLE_Msk (0x1UL << QDEC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define QDEC_ENABLE_ENABLE_Disabled (0UL) /*!< Disable */
+#define QDEC_ENABLE_ENABLE_Enabled (1UL) /*!< Enable */
+
+/* Register: QDEC_LEDPOL */
+/* Description: LED output pin polarity */
+
+/* Bit 0 : LED output pin polarity */
+#define QDEC_LEDPOL_LEDPOL_Pos (0UL) /*!< Position of LEDPOL field. */
+#define QDEC_LEDPOL_LEDPOL_Msk (0x1UL << QDEC_LEDPOL_LEDPOL_Pos) /*!< Bit mask of LEDPOL field. */
+#define QDEC_LEDPOL_LEDPOL_ActiveLow (0UL) /*!< Led active on output pin low */
+#define QDEC_LEDPOL_LEDPOL_ActiveHigh (1UL) /*!< Led active on output pin high */
+
+/* Register: QDEC_SAMPLEPER */
+/* Description: Sample period */
+
+/* Bits 3..0 : Sample period. The SAMPLE register will be updated for every new sample */
+#define QDEC_SAMPLEPER_SAMPLEPER_Pos (0UL) /*!< Position of SAMPLEPER field. */
+#define QDEC_SAMPLEPER_SAMPLEPER_Msk (0xFUL << QDEC_SAMPLEPER_SAMPLEPER_Pos) /*!< Bit mask of SAMPLEPER field. */
+#define QDEC_SAMPLEPER_SAMPLEPER_128us (0UL) /*!< 128 us */
+#define QDEC_SAMPLEPER_SAMPLEPER_256us (1UL) /*!< 256 us */
+#define QDEC_SAMPLEPER_SAMPLEPER_512us (2UL) /*!< 512 us */
+#define QDEC_SAMPLEPER_SAMPLEPER_1024us (3UL) /*!< 1024 us */
+#define QDEC_SAMPLEPER_SAMPLEPER_2048us (4UL) /*!< 2048 us */
+#define QDEC_SAMPLEPER_SAMPLEPER_4096us (5UL) /*!< 4096 us */
+#define QDEC_SAMPLEPER_SAMPLEPER_8192us (6UL) /*!< 8192 us */
+#define QDEC_SAMPLEPER_SAMPLEPER_16384us (7UL) /*!< 16384 us */
+#define QDEC_SAMPLEPER_SAMPLEPER_32ms (8UL) /*!< 32768 us */
+#define QDEC_SAMPLEPER_SAMPLEPER_65ms (9UL) /*!< 65536 us */
+#define QDEC_SAMPLEPER_SAMPLEPER_131ms (10UL) /*!< 131072 us */
+
+/* Register: QDEC_SAMPLE */
+/* Description: Motion sample value */
+
+/* Bits 31..0 : Last motion sample */
+#define QDEC_SAMPLE_SAMPLE_Pos (0UL) /*!< Position of SAMPLE field. */
+#define QDEC_SAMPLE_SAMPLE_Msk (0xFFFFFFFFUL << QDEC_SAMPLE_SAMPLE_Pos) /*!< Bit mask of SAMPLE field. */
+
+/* Register: QDEC_REPORTPER */
+/* Description: Number of samples to be taken before REPORTRDY and DBLRDY events can be generated */
+
+/* Bits 3..0 : Specifies the number of samples to be accumulated in the ACC register before the REPORTRDY and DBLRDY events can be generated */
+#define QDEC_REPORTPER_REPORTPER_Pos (0UL) /*!< Position of REPORTPER field. */
+#define QDEC_REPORTPER_REPORTPER_Msk (0xFUL << QDEC_REPORTPER_REPORTPER_Pos) /*!< Bit mask of REPORTPER field. */
+#define QDEC_REPORTPER_REPORTPER_10Smpl (0UL) /*!< 10 samples / report */
+#define QDEC_REPORTPER_REPORTPER_40Smpl (1UL) /*!< 40 samples / report */
+#define QDEC_REPORTPER_REPORTPER_80Smpl (2UL) /*!< 80 samples / report */
+#define QDEC_REPORTPER_REPORTPER_120Smpl (3UL) /*!< 120 samples / report */
+#define QDEC_REPORTPER_REPORTPER_160Smpl (4UL) /*!< 160 samples / report */
+#define QDEC_REPORTPER_REPORTPER_200Smpl (5UL) /*!< 200 samples / report */
+#define QDEC_REPORTPER_REPORTPER_240Smpl (6UL) /*!< 240 samples / report */
+#define QDEC_REPORTPER_REPORTPER_280Smpl (7UL) /*!< 280 samples / report */
+#define QDEC_REPORTPER_REPORTPER_1Smpl (8UL) /*!< 1 sample / report */
+
+/* Register: QDEC_ACC */
+/* Description: Register accumulating the valid transitions */
+
+/* Bits 31..0 : Register accumulating all valid samples (not double transition) read from the SAMPLE register */
+#define QDEC_ACC_ACC_Pos (0UL) /*!< Position of ACC field. */
+#define QDEC_ACC_ACC_Msk (0xFFFFFFFFUL << QDEC_ACC_ACC_Pos) /*!< Bit mask of ACC field. */
+
+/* Register: QDEC_ACCREAD */
+/* Description: Snapshot of the ACC register, updated by the READCLRACC or RDCLRACC task */
+
+/* Bits 31..0 : Snapshot of the ACC register. */
+#define QDEC_ACCREAD_ACCREAD_Pos (0UL) /*!< Position of ACCREAD field. */
+#define QDEC_ACCREAD_ACCREAD_Msk (0xFFFFFFFFUL << QDEC_ACCREAD_ACCREAD_Pos) /*!< Bit mask of ACCREAD field. */
+
+/* Register: QDEC_PSEL_LED */
+/* Description: Pin select for LED signal */
+
+/* Bit 31 : Connection */
+#define QDEC_PSEL_LED_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define QDEC_PSEL_LED_CONNECT_Msk (0x1UL << QDEC_PSEL_LED_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define QDEC_PSEL_LED_CONNECT_Connected (0UL) /*!< Connect */
+#define QDEC_PSEL_LED_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define QDEC_PSEL_LED_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define QDEC_PSEL_LED_PIN_Msk (0x1FUL << QDEC_PSEL_LED_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: QDEC_PSEL_A */
+/* Description: Pin select for A signal */
+
+/* Bit 31 : Connection */
+#define QDEC_PSEL_A_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define QDEC_PSEL_A_CONNECT_Msk (0x1UL << QDEC_PSEL_A_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define QDEC_PSEL_A_CONNECT_Connected (0UL) /*!< Connect */
+#define QDEC_PSEL_A_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define QDEC_PSEL_A_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define QDEC_PSEL_A_PIN_Msk (0x1FUL << QDEC_PSEL_A_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: QDEC_PSEL_B */
+/* Description: Pin select for B signal */
+
+/* Bit 31 : Connection */
+#define QDEC_PSEL_B_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define QDEC_PSEL_B_CONNECT_Msk (0x1UL << QDEC_PSEL_B_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define QDEC_PSEL_B_CONNECT_Connected (0UL) /*!< Connect */
+#define QDEC_PSEL_B_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define QDEC_PSEL_B_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define QDEC_PSEL_B_PIN_Msk (0x1FUL << QDEC_PSEL_B_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: QDEC_DBFEN */
+/* Description: Enable input debounce filters */
+
+/* Bit 0 : Enable input debounce filters */
+#define QDEC_DBFEN_DBFEN_Pos (0UL) /*!< Position of DBFEN field. */
+#define QDEC_DBFEN_DBFEN_Msk (0x1UL << QDEC_DBFEN_DBFEN_Pos) /*!< Bit mask of DBFEN field. */
+#define QDEC_DBFEN_DBFEN_Disabled (0UL) /*!< Debounce input filters disabled */
+#define QDEC_DBFEN_DBFEN_Enabled (1UL) /*!< Debounce input filters enabled */
+
+/* Register: QDEC_LEDPRE */
+/* Description: Time period the LED is switched ON prior to sampling */
+
+/* Bits 8..0 : Period in us the LED is switched on prior to sampling */
+#define QDEC_LEDPRE_LEDPRE_Pos (0UL) /*!< Position of LEDPRE field. */
+#define QDEC_LEDPRE_LEDPRE_Msk (0x1FFUL << QDEC_LEDPRE_LEDPRE_Pos) /*!< Bit mask of LEDPRE field. */
+
+/* Register: QDEC_ACCDBL */
+/* Description: Register accumulating the number of detected double transitions */
+
+/* Bits 3..0 : Register accumulating the number of detected double or illegal transitions. ( SAMPLE = 2 ). */
+#define QDEC_ACCDBL_ACCDBL_Pos (0UL) /*!< Position of ACCDBL field. */
+#define QDEC_ACCDBL_ACCDBL_Msk (0xFUL << QDEC_ACCDBL_ACCDBL_Pos) /*!< Bit mask of ACCDBL field. */
+
+/* Register: QDEC_ACCDBLREAD */
+/* Description: Snapshot of the ACCDBL, updated by the READCLRACC or RDCLRDBL task */
+
+/* Bits 3..0 : Snapshot of the ACCDBL register. This field is updated when the READCLRACC or RDCLRDBL task is triggered. */
+#define QDEC_ACCDBLREAD_ACCDBLREAD_Pos (0UL) /*!< Position of ACCDBLREAD field. */
+#define QDEC_ACCDBLREAD_ACCDBLREAD_Msk (0xFUL << QDEC_ACCDBLREAD_ACCDBLREAD_Pos) /*!< Bit mask of ACCDBLREAD field. */
+
+
+/* Peripheral: RADIO */
+/* Description: 2.4 GHz Radio */
+
+/* Register: RADIO_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 8 : Shortcut between DISABLED event and RSSISTOP task */
+#define RADIO_SHORTS_DISABLED_RSSISTOP_Pos (8UL) /*!< Position of DISABLED_RSSISTOP field. */
+#define RADIO_SHORTS_DISABLED_RSSISTOP_Msk (0x1UL << RADIO_SHORTS_DISABLED_RSSISTOP_Pos) /*!< Bit mask of DISABLED_RSSISTOP field. */
+#define RADIO_SHORTS_DISABLED_RSSISTOP_Disabled (0UL) /*!< Disable shortcut */
+#define RADIO_SHORTS_DISABLED_RSSISTOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 6 : Shortcut between ADDRESS event and BCSTART task */
+#define RADIO_SHORTS_ADDRESS_BCSTART_Pos (6UL) /*!< Position of ADDRESS_BCSTART field. */
+#define RADIO_SHORTS_ADDRESS_BCSTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_BCSTART_Pos) /*!< Bit mask of ADDRESS_BCSTART field. */
+#define RADIO_SHORTS_ADDRESS_BCSTART_Disabled (0UL) /*!< Disable shortcut */
+#define RADIO_SHORTS_ADDRESS_BCSTART_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 5 : Shortcut between END event and START task */
+#define RADIO_SHORTS_END_START_Pos (5UL) /*!< Position of END_START field. */
+#define RADIO_SHORTS_END_START_Msk (0x1UL << RADIO_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */
+#define RADIO_SHORTS_END_START_Disabled (0UL) /*!< Disable shortcut */
+#define RADIO_SHORTS_END_START_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 4 : Shortcut between ADDRESS event and RSSISTART task */
+#define RADIO_SHORTS_ADDRESS_RSSISTART_Pos (4UL) /*!< Position of ADDRESS_RSSISTART field. */
+#define RADIO_SHORTS_ADDRESS_RSSISTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_RSSISTART_Pos) /*!< Bit mask of ADDRESS_RSSISTART field. */
+#define RADIO_SHORTS_ADDRESS_RSSISTART_Disabled (0UL) /*!< Disable shortcut */
+#define RADIO_SHORTS_ADDRESS_RSSISTART_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 3 : Shortcut between DISABLED event and RXEN task */
+#define RADIO_SHORTS_DISABLED_RXEN_Pos (3UL) /*!< Position of DISABLED_RXEN field. */
+#define RADIO_SHORTS_DISABLED_RXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_RXEN_Pos) /*!< Bit mask of DISABLED_RXEN field. */
+#define RADIO_SHORTS_DISABLED_RXEN_Disabled (0UL) /*!< Disable shortcut */
+#define RADIO_SHORTS_DISABLED_RXEN_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 2 : Shortcut between DISABLED event and TXEN task */
+#define RADIO_SHORTS_DISABLED_TXEN_Pos (2UL) /*!< Position of DISABLED_TXEN field. */
+#define RADIO_SHORTS_DISABLED_TXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_TXEN_Pos) /*!< Bit mask of DISABLED_TXEN field. */
+#define RADIO_SHORTS_DISABLED_TXEN_Disabled (0UL) /*!< Disable shortcut */
+#define RADIO_SHORTS_DISABLED_TXEN_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 1 : Shortcut between END event and DISABLE task */
+#define RADIO_SHORTS_END_DISABLE_Pos (1UL) /*!< Position of END_DISABLE field. */
+#define RADIO_SHORTS_END_DISABLE_Msk (0x1UL << RADIO_SHORTS_END_DISABLE_Pos) /*!< Bit mask of END_DISABLE field. */
+#define RADIO_SHORTS_END_DISABLE_Disabled (0UL) /*!< Disable shortcut */
+#define RADIO_SHORTS_END_DISABLE_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 0 : Shortcut between READY event and START task */
+#define RADIO_SHORTS_READY_START_Pos (0UL) /*!< Position of READY_START field. */
+#define RADIO_SHORTS_READY_START_Msk (0x1UL << RADIO_SHORTS_READY_START_Pos) /*!< Bit mask of READY_START field. */
+#define RADIO_SHORTS_READY_START_Disabled (0UL) /*!< Disable shortcut */
+#define RADIO_SHORTS_READY_START_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: RADIO_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 13 : Write '1' to Enable interrupt for CRCERROR event */
+#define RADIO_INTENSET_CRCERROR_Pos (13UL) /*!< Position of CRCERROR field. */
+#define RADIO_INTENSET_CRCERROR_Msk (0x1UL << RADIO_INTENSET_CRCERROR_Pos) /*!< Bit mask of CRCERROR field. */
+#define RADIO_INTENSET_CRCERROR_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENSET_CRCERROR_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENSET_CRCERROR_Set (1UL) /*!< Enable */
+
+/* Bit 12 : Write '1' to Enable interrupt for CRCOK event */
+#define RADIO_INTENSET_CRCOK_Pos (12UL) /*!< Position of CRCOK field. */
+#define RADIO_INTENSET_CRCOK_Msk (0x1UL << RADIO_INTENSET_CRCOK_Pos) /*!< Bit mask of CRCOK field. */
+#define RADIO_INTENSET_CRCOK_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENSET_CRCOK_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENSET_CRCOK_Set (1UL) /*!< Enable */
+
+/* Bit 10 : Write '1' to Enable interrupt for BCMATCH event */
+#define RADIO_INTENSET_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */
+#define RADIO_INTENSET_BCMATCH_Msk (0x1UL << RADIO_INTENSET_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */
+#define RADIO_INTENSET_BCMATCH_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENSET_BCMATCH_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENSET_BCMATCH_Set (1UL) /*!< Enable */
+
+/* Bit 7 : Write '1' to Enable interrupt for RSSIEND event */
+#define RADIO_INTENSET_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */
+#define RADIO_INTENSET_RSSIEND_Msk (0x1UL << RADIO_INTENSET_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */
+#define RADIO_INTENSET_RSSIEND_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENSET_RSSIEND_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENSET_RSSIEND_Set (1UL) /*!< Enable */
+
+/* Bit 6 : Write '1' to Enable interrupt for DEVMISS event */
+#define RADIO_INTENSET_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */
+#define RADIO_INTENSET_DEVMISS_Msk (0x1UL << RADIO_INTENSET_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */
+#define RADIO_INTENSET_DEVMISS_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENSET_DEVMISS_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENSET_DEVMISS_Set (1UL) /*!< Enable */
+
+/* Bit 5 : Write '1' to Enable interrupt for DEVMATCH event */
+#define RADIO_INTENSET_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */
+#define RADIO_INTENSET_DEVMATCH_Msk (0x1UL << RADIO_INTENSET_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */
+#define RADIO_INTENSET_DEVMATCH_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENSET_DEVMATCH_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENSET_DEVMATCH_Set (1UL) /*!< Enable */
+
+/* Bit 4 : Write '1' to Enable interrupt for DISABLED event */
+#define RADIO_INTENSET_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */
+#define RADIO_INTENSET_DISABLED_Msk (0x1UL << RADIO_INTENSET_DISABLED_Pos) /*!< Bit mask of DISABLED field. */
+#define RADIO_INTENSET_DISABLED_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENSET_DISABLED_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENSET_DISABLED_Set (1UL) /*!< Enable */
+
+/* Bit 3 : Write '1' to Enable interrupt for END event */
+#define RADIO_INTENSET_END_Pos (3UL) /*!< Position of END field. */
+#define RADIO_INTENSET_END_Msk (0x1UL << RADIO_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define RADIO_INTENSET_END_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENSET_END_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENSET_END_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for PAYLOAD event */
+#define RADIO_INTENSET_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */
+#define RADIO_INTENSET_PAYLOAD_Msk (0x1UL << RADIO_INTENSET_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */
+#define RADIO_INTENSET_PAYLOAD_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENSET_PAYLOAD_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENSET_PAYLOAD_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for ADDRESS event */
+#define RADIO_INTENSET_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */
+#define RADIO_INTENSET_ADDRESS_Msk (0x1UL << RADIO_INTENSET_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */
+#define RADIO_INTENSET_ADDRESS_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENSET_ADDRESS_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENSET_ADDRESS_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for READY event */
+#define RADIO_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */
+#define RADIO_INTENSET_READY_Msk (0x1UL << RADIO_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
+#define RADIO_INTENSET_READY_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENSET_READY_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENSET_READY_Set (1UL) /*!< Enable */
+
+/* Register: RADIO_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 13 : Write '1' to Disable interrupt for CRCERROR event */
+#define RADIO_INTENCLR_CRCERROR_Pos (13UL) /*!< Position of CRCERROR field. */
+#define RADIO_INTENCLR_CRCERROR_Msk (0x1UL << RADIO_INTENCLR_CRCERROR_Pos) /*!< Bit mask of CRCERROR field. */
+#define RADIO_INTENCLR_CRCERROR_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENCLR_CRCERROR_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENCLR_CRCERROR_Clear (1UL) /*!< Disable */
+
+/* Bit 12 : Write '1' to Disable interrupt for CRCOK event */
+#define RADIO_INTENCLR_CRCOK_Pos (12UL) /*!< Position of CRCOK field. */
+#define RADIO_INTENCLR_CRCOK_Msk (0x1UL << RADIO_INTENCLR_CRCOK_Pos) /*!< Bit mask of CRCOK field. */
+#define RADIO_INTENCLR_CRCOK_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENCLR_CRCOK_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENCLR_CRCOK_Clear (1UL) /*!< Disable */
+
+/* Bit 10 : Write '1' to Disable interrupt for BCMATCH event */
+#define RADIO_INTENCLR_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */
+#define RADIO_INTENCLR_BCMATCH_Msk (0x1UL << RADIO_INTENCLR_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */
+#define RADIO_INTENCLR_BCMATCH_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENCLR_BCMATCH_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENCLR_BCMATCH_Clear (1UL) /*!< Disable */
+
+/* Bit 7 : Write '1' to Disable interrupt for RSSIEND event */
+#define RADIO_INTENCLR_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */
+#define RADIO_INTENCLR_RSSIEND_Msk (0x1UL << RADIO_INTENCLR_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */
+#define RADIO_INTENCLR_RSSIEND_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENCLR_RSSIEND_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENCLR_RSSIEND_Clear (1UL) /*!< Disable */
+
+/* Bit 6 : Write '1' to Disable interrupt for DEVMISS event */
+#define RADIO_INTENCLR_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */
+#define RADIO_INTENCLR_DEVMISS_Msk (0x1UL << RADIO_INTENCLR_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */
+#define RADIO_INTENCLR_DEVMISS_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENCLR_DEVMISS_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENCLR_DEVMISS_Clear (1UL) /*!< Disable */
+
+/* Bit 5 : Write '1' to Disable interrupt for DEVMATCH event */
+#define RADIO_INTENCLR_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */
+#define RADIO_INTENCLR_DEVMATCH_Msk (0x1UL << RADIO_INTENCLR_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */
+#define RADIO_INTENCLR_DEVMATCH_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENCLR_DEVMATCH_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENCLR_DEVMATCH_Clear (1UL) /*!< Disable */
+
+/* Bit 4 : Write '1' to Disable interrupt for DISABLED event */
+#define RADIO_INTENCLR_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */
+#define RADIO_INTENCLR_DISABLED_Msk (0x1UL << RADIO_INTENCLR_DISABLED_Pos) /*!< Bit mask of DISABLED field. */
+#define RADIO_INTENCLR_DISABLED_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENCLR_DISABLED_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENCLR_DISABLED_Clear (1UL) /*!< Disable */
+
+/* Bit 3 : Write '1' to Disable interrupt for END event */
+#define RADIO_INTENCLR_END_Pos (3UL) /*!< Position of END field. */
+#define RADIO_INTENCLR_END_Msk (0x1UL << RADIO_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define RADIO_INTENCLR_END_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENCLR_END_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENCLR_END_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for PAYLOAD event */
+#define RADIO_INTENCLR_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */
+#define RADIO_INTENCLR_PAYLOAD_Msk (0x1UL << RADIO_INTENCLR_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */
+#define RADIO_INTENCLR_PAYLOAD_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENCLR_PAYLOAD_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENCLR_PAYLOAD_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for ADDRESS event */
+#define RADIO_INTENCLR_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */
+#define RADIO_INTENCLR_ADDRESS_Msk (0x1UL << RADIO_INTENCLR_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */
+#define RADIO_INTENCLR_ADDRESS_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENCLR_ADDRESS_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENCLR_ADDRESS_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for READY event */
+#define RADIO_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */
+#define RADIO_INTENCLR_READY_Msk (0x1UL << RADIO_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
+#define RADIO_INTENCLR_READY_Disabled (0UL) /*!< Read: Disabled */
+#define RADIO_INTENCLR_READY_Enabled (1UL) /*!< Read: Enabled */
+#define RADIO_INTENCLR_READY_Clear (1UL) /*!< Disable */
+
+/* Register: RADIO_CRCSTATUS */
+/* Description: CRC status */
+
+/* Bit 0 : CRC status of packet received */
+#define RADIO_CRCSTATUS_CRCSTATUS_Pos (0UL) /*!< Position of CRCSTATUS field. */
+#define RADIO_CRCSTATUS_CRCSTATUS_Msk (0x1UL << RADIO_CRCSTATUS_CRCSTATUS_Pos) /*!< Bit mask of CRCSTATUS field. */
+#define RADIO_CRCSTATUS_CRCSTATUS_CRCError (0UL) /*!< Packet received with CRC error */
+#define RADIO_CRCSTATUS_CRCSTATUS_CRCOk (1UL) /*!< Packet received with CRC ok */
+
+/* Register: RADIO_RXMATCH */
+/* Description: Received address */
+
+/* Bits 2..0 : Received address */
+#define RADIO_RXMATCH_RXMATCH_Pos (0UL) /*!< Position of RXMATCH field. */
+#define RADIO_RXMATCH_RXMATCH_Msk (0x7UL << RADIO_RXMATCH_RXMATCH_Pos) /*!< Bit mask of RXMATCH field. */
+
+/* Register: RADIO_RXCRC */
+/* Description: CRC field of previously received packet */
+
+/* Bits 23..0 : CRC field of previously received packet */
+#define RADIO_RXCRC_RXCRC_Pos (0UL) /*!< Position of RXCRC field. */
+#define RADIO_RXCRC_RXCRC_Msk (0xFFFFFFUL << RADIO_RXCRC_RXCRC_Pos) /*!< Bit mask of RXCRC field. */
+
+/* Register: RADIO_DAI */
+/* Description: Device address match index */
+
+/* Bits 2..0 : Device address match index */
+#define RADIO_DAI_DAI_Pos (0UL) /*!< Position of DAI field. */
+#define RADIO_DAI_DAI_Msk (0x7UL << RADIO_DAI_DAI_Pos) /*!< Bit mask of DAI field. */
+
+/* Register: RADIO_PACKETPTR */
+/* Description: Packet pointer */
+
+/* Bits 31..0 : Packet pointer */
+#define RADIO_PACKETPTR_PACKETPTR_Pos (0UL) /*!< Position of PACKETPTR field. */
+#define RADIO_PACKETPTR_PACKETPTR_Msk (0xFFFFFFFFUL << RADIO_PACKETPTR_PACKETPTR_Pos) /*!< Bit mask of PACKETPTR field. */
+
+/* Register: RADIO_FREQUENCY */
+/* Description: Frequency */
+
+/* Bit 8 : Channel map selection. */
+#define RADIO_FREQUENCY_MAP_Pos (8UL) /*!< Position of MAP field. */
+#define RADIO_FREQUENCY_MAP_Msk (0x1UL << RADIO_FREQUENCY_MAP_Pos) /*!< Bit mask of MAP field. */
+#define RADIO_FREQUENCY_MAP_Default (0UL) /*!< Channel map between 2400 MHZ .. 2500 MHz */
+#define RADIO_FREQUENCY_MAP_Low (1UL) /*!< Channel map between 2360 MHZ .. 2460 MHz */
+
+/* Bits 6..0 : Radio channel frequency */
+#define RADIO_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
+#define RADIO_FREQUENCY_FREQUENCY_Msk (0x7FUL << RADIO_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
+
+/* Register: RADIO_TXPOWER */
+/* Description: Output power */
+
+/* Bits 7..0 : RADIO output power. */
+#define RADIO_TXPOWER_TXPOWER_Pos (0UL) /*!< Position of TXPOWER field. */
+#define RADIO_TXPOWER_TXPOWER_Msk (0xFFUL << RADIO_TXPOWER_TXPOWER_Pos) /*!< Bit mask of TXPOWER field. */
+#define RADIO_TXPOWER_TXPOWER_0dBm (0x00UL) /*!< 0 dBm */
+#define RADIO_TXPOWER_TXPOWER_Pos3dBm (0x03UL) /*!< +3 dBm */
+#define RADIO_TXPOWER_TXPOWER_Pos4dBm (0x04UL) /*!< +4 dBm */
+#define RADIO_TXPOWER_TXPOWER_Neg30dBm (0xD8UL) /*!< Deprecated enumerator - -40 dBm */
+#define RADIO_TXPOWER_TXPOWER_Neg40dBm (0xD8UL) /*!< -40 dBm */
+#define RADIO_TXPOWER_TXPOWER_Neg20dBm (0xECUL) /*!< -20 dBm */
+#define RADIO_TXPOWER_TXPOWER_Neg16dBm (0xF0UL) /*!< -16 dBm */
+#define RADIO_TXPOWER_TXPOWER_Neg12dBm (0xF4UL) /*!< -12 dBm */
+#define RADIO_TXPOWER_TXPOWER_Neg8dBm (0xF8UL) /*!< -8 dBm */
+#define RADIO_TXPOWER_TXPOWER_Neg4dBm (0xFCUL) /*!< -4 dBm */
+
+/* Register: RADIO_MODE */
+/* Description: Data rate and modulation */
+
+/* Bits 3..0 : Radio data rate and modulation setting. The radio supports Frequency-shift Keying (FSK) modulation. */
+#define RADIO_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */
+#define RADIO_MODE_MODE_Msk (0xFUL << RADIO_MODE_MODE_Pos) /*!< Bit mask of MODE field. */
+#define RADIO_MODE_MODE_Nrf_1Mbit (0UL) /*!< 1 Mbit/s Nordic proprietary radio mode */
+#define RADIO_MODE_MODE_Nrf_2Mbit (1UL) /*!< 2 Mbit/s Nordic proprietary radio mode */
+#define RADIO_MODE_MODE_Nrf_250Kbit (2UL) /*!< Deprecated enumerator - 250 kbit/s Nordic proprietary radio mode */
+#define RADIO_MODE_MODE_Ble_1Mbit (3UL) /*!< 1 Mbit/s Bluetooth Low Energy */
+
+/* Register: RADIO_PCNF0 */
+/* Description: Packet configuration register 0 */
+
+/* Bit 24 : Length of preamble on air. Decision point: TASKS_START task */
+#define RADIO_PCNF0_PLEN_Pos (24UL) /*!< Position of PLEN field. */
+#define RADIO_PCNF0_PLEN_Msk (0x1UL << RADIO_PCNF0_PLEN_Pos) /*!< Bit mask of PLEN field. */
+#define RADIO_PCNF0_PLEN_8bit (0UL) /*!< 8-bit preamble */
+#define RADIO_PCNF0_PLEN_16bit (1UL) /*!< 16-bit preamble */
+
+/* Bit 20 : Include or exclude S1 field in RAM */
+#define RADIO_PCNF0_S1INCL_Pos (20UL) /*!< Position of S1INCL field. */
+#define RADIO_PCNF0_S1INCL_Msk (0x1UL << RADIO_PCNF0_S1INCL_Pos) /*!< Bit mask of S1INCL field. */
+#define RADIO_PCNF0_S1INCL_Automatic (0UL) /*!< Include S1 field in RAM only if S1LEN > 0 */
+#define RADIO_PCNF0_S1INCL_Include (1UL) /*!< Always include S1 field in RAM independent of S1LEN */
+
+/* Bits 19..16 : Length on air of S1 field in number of bits. */
+#define RADIO_PCNF0_S1LEN_Pos (16UL) /*!< Position of S1LEN field. */
+#define RADIO_PCNF0_S1LEN_Msk (0xFUL << RADIO_PCNF0_S1LEN_Pos) /*!< Bit mask of S1LEN field. */
+
+/* Bit 8 : Length on air of S0 field in number of bytes. */
+#define RADIO_PCNF0_S0LEN_Pos (8UL) /*!< Position of S0LEN field. */
+#define RADIO_PCNF0_S0LEN_Msk (0x1UL << RADIO_PCNF0_S0LEN_Pos) /*!< Bit mask of S0LEN field. */
+
+/* Bits 3..0 : Length on air of LENGTH field in number of bits. */
+#define RADIO_PCNF0_LFLEN_Pos (0UL) /*!< Position of LFLEN field. */
+#define RADIO_PCNF0_LFLEN_Msk (0xFUL << RADIO_PCNF0_LFLEN_Pos) /*!< Bit mask of LFLEN field. */
+
+/* Register: RADIO_PCNF1 */
+/* Description: Packet configuration register 1 */
+
+/* Bit 25 : Enable or disable packet whitening */
+#define RADIO_PCNF1_WHITEEN_Pos (25UL) /*!< Position of WHITEEN field. */
+#define RADIO_PCNF1_WHITEEN_Msk (0x1UL << RADIO_PCNF1_WHITEEN_Pos) /*!< Bit mask of WHITEEN field. */
+#define RADIO_PCNF1_WHITEEN_Disabled (0UL) /*!< Disable */
+#define RADIO_PCNF1_WHITEEN_Enabled (1UL) /*!< Enable */
+
+/* Bit 24 : On air endianness of packet, this applies to the S0, LENGTH, S1 and the PAYLOAD fields. */
+#define RADIO_PCNF1_ENDIAN_Pos (24UL) /*!< Position of ENDIAN field. */
+#define RADIO_PCNF1_ENDIAN_Msk (0x1UL << RADIO_PCNF1_ENDIAN_Pos) /*!< Bit mask of ENDIAN field. */
+#define RADIO_PCNF1_ENDIAN_Little (0UL) /*!< Least Significant bit on air first */
+#define RADIO_PCNF1_ENDIAN_Big (1UL) /*!< Most significant bit on air first */
+
+/* Bits 18..16 : Base address length in number of bytes */
+#define RADIO_PCNF1_BALEN_Pos (16UL) /*!< Position of BALEN field. */
+#define RADIO_PCNF1_BALEN_Msk (0x7UL << RADIO_PCNF1_BALEN_Pos) /*!< Bit mask of BALEN field. */
+
+/* Bits 15..8 : Static length in number of bytes */
+#define RADIO_PCNF1_STATLEN_Pos (8UL) /*!< Position of STATLEN field. */
+#define RADIO_PCNF1_STATLEN_Msk (0xFFUL << RADIO_PCNF1_STATLEN_Pos) /*!< Bit mask of STATLEN field. */
+
+/* Bits 7..0 : Maximum length of packet payload. If the packet payload is larger than MAXLEN, the radio will truncate the payload to MAXLEN. */
+#define RADIO_PCNF1_MAXLEN_Pos (0UL) /*!< Position of MAXLEN field. */
+#define RADIO_PCNF1_MAXLEN_Msk (0xFFUL << RADIO_PCNF1_MAXLEN_Pos) /*!< Bit mask of MAXLEN field. */
+
+/* Register: RADIO_BASE0 */
+/* Description: Base address 0 */
+
+/* Bits 31..0 : Base address 0 */
+#define RADIO_BASE0_BASE0_Pos (0UL) /*!< Position of BASE0 field. */
+#define RADIO_BASE0_BASE0_Msk (0xFFFFFFFFUL << RADIO_BASE0_BASE0_Pos) /*!< Bit mask of BASE0 field. */
+
+/* Register: RADIO_BASE1 */
+/* Description: Base address 1 */
+
+/* Bits 31..0 : Base address 1 */
+#define RADIO_BASE1_BASE1_Pos (0UL) /*!< Position of BASE1 field. */
+#define RADIO_BASE1_BASE1_Msk (0xFFFFFFFFUL << RADIO_BASE1_BASE1_Pos) /*!< Bit mask of BASE1 field. */
+
+/* Register: RADIO_PREFIX0 */
+/* Description: Prefixes bytes for logical addresses 0-3 */
+
+/* Bits 31..24 : Address prefix 3. */
+#define RADIO_PREFIX0_AP3_Pos (24UL) /*!< Position of AP3 field. */
+#define RADIO_PREFIX0_AP3_Msk (0xFFUL << RADIO_PREFIX0_AP3_Pos) /*!< Bit mask of AP3 field. */
+
+/* Bits 23..16 : Address prefix 2. */
+#define RADIO_PREFIX0_AP2_Pos (16UL) /*!< Position of AP2 field. */
+#define RADIO_PREFIX0_AP2_Msk (0xFFUL << RADIO_PREFIX0_AP2_Pos) /*!< Bit mask of AP2 field. */
+
+/* Bits 15..8 : Address prefix 1. */
+#define RADIO_PREFIX0_AP1_Pos (8UL) /*!< Position of AP1 field. */
+#define RADIO_PREFIX0_AP1_Msk (0xFFUL << RADIO_PREFIX0_AP1_Pos) /*!< Bit mask of AP1 field. */
+
+/* Bits 7..0 : Address prefix 0. */
+#define RADIO_PREFIX0_AP0_Pos (0UL) /*!< Position of AP0 field. */
+#define RADIO_PREFIX0_AP0_Msk (0xFFUL << RADIO_PREFIX0_AP0_Pos) /*!< Bit mask of AP0 field. */
+
+/* Register: RADIO_PREFIX1 */
+/* Description: Prefixes bytes for logical addresses 4-7 */
+
+/* Bits 31..24 : Address prefix 7. */
+#define RADIO_PREFIX1_AP7_Pos (24UL) /*!< Position of AP7 field. */
+#define RADIO_PREFIX1_AP7_Msk (0xFFUL << RADIO_PREFIX1_AP7_Pos) /*!< Bit mask of AP7 field. */
+
+/* Bits 23..16 : Address prefix 6. */
+#define RADIO_PREFIX1_AP6_Pos (16UL) /*!< Position of AP6 field. */
+#define RADIO_PREFIX1_AP6_Msk (0xFFUL << RADIO_PREFIX1_AP6_Pos) /*!< Bit mask of AP6 field. */
+
+/* Bits 15..8 : Address prefix 5. */
+#define RADIO_PREFIX1_AP5_Pos (8UL) /*!< Position of AP5 field. */
+#define RADIO_PREFIX1_AP5_Msk (0xFFUL << RADIO_PREFIX1_AP5_Pos) /*!< Bit mask of AP5 field. */
+
+/* Bits 7..0 : Address prefix 4. */
+#define RADIO_PREFIX1_AP4_Pos (0UL) /*!< Position of AP4 field. */
+#define RADIO_PREFIX1_AP4_Msk (0xFFUL << RADIO_PREFIX1_AP4_Pos) /*!< Bit mask of AP4 field. */
+
+/* Register: RADIO_TXADDRESS */
+/* Description: Transmit address select */
+
+/* Bits 2..0 : Transmit address select */
+#define RADIO_TXADDRESS_TXADDRESS_Pos (0UL) /*!< Position of TXADDRESS field. */
+#define RADIO_TXADDRESS_TXADDRESS_Msk (0x7UL << RADIO_TXADDRESS_TXADDRESS_Pos) /*!< Bit mask of TXADDRESS field. */
+
+/* Register: RADIO_RXADDRESSES */
+/* Description: Receive address select */
+
+/* Bit 7 : Enable or disable reception on logical address 7. */
+#define RADIO_RXADDRESSES_ADDR7_Pos (7UL) /*!< Position of ADDR7 field. */
+#define RADIO_RXADDRESSES_ADDR7_Msk (0x1UL << RADIO_RXADDRESSES_ADDR7_Pos) /*!< Bit mask of ADDR7 field. */
+#define RADIO_RXADDRESSES_ADDR7_Disabled (0UL) /*!< Disable */
+#define RADIO_RXADDRESSES_ADDR7_Enabled (1UL) /*!< Enable */
+
+/* Bit 6 : Enable or disable reception on logical address 6. */
+#define RADIO_RXADDRESSES_ADDR6_Pos (6UL) /*!< Position of ADDR6 field. */
+#define RADIO_RXADDRESSES_ADDR6_Msk (0x1UL << RADIO_RXADDRESSES_ADDR6_Pos) /*!< Bit mask of ADDR6 field. */
+#define RADIO_RXADDRESSES_ADDR6_Disabled (0UL) /*!< Disable */
+#define RADIO_RXADDRESSES_ADDR6_Enabled (1UL) /*!< Enable */
+
+/* Bit 5 : Enable or disable reception on logical address 5. */
+#define RADIO_RXADDRESSES_ADDR5_Pos (5UL) /*!< Position of ADDR5 field. */
+#define RADIO_RXADDRESSES_ADDR5_Msk (0x1UL << RADIO_RXADDRESSES_ADDR5_Pos) /*!< Bit mask of ADDR5 field. */
+#define RADIO_RXADDRESSES_ADDR5_Disabled (0UL) /*!< Disable */
+#define RADIO_RXADDRESSES_ADDR5_Enabled (1UL) /*!< Enable */
+
+/* Bit 4 : Enable or disable reception on logical address 4. */
+#define RADIO_RXADDRESSES_ADDR4_Pos (4UL) /*!< Position of ADDR4 field. */
+#define RADIO_RXADDRESSES_ADDR4_Msk (0x1UL << RADIO_RXADDRESSES_ADDR4_Pos) /*!< Bit mask of ADDR4 field. */
+#define RADIO_RXADDRESSES_ADDR4_Disabled (0UL) /*!< Disable */
+#define RADIO_RXADDRESSES_ADDR4_Enabled (1UL) /*!< Enable */
+
+/* Bit 3 : Enable or disable reception on logical address 3. */
+#define RADIO_RXADDRESSES_ADDR3_Pos (3UL) /*!< Position of ADDR3 field. */
+#define RADIO_RXADDRESSES_ADDR3_Msk (0x1UL << RADIO_RXADDRESSES_ADDR3_Pos) /*!< Bit mask of ADDR3 field. */
+#define RADIO_RXADDRESSES_ADDR3_Disabled (0UL) /*!< Disable */
+#define RADIO_RXADDRESSES_ADDR3_Enabled (1UL) /*!< Enable */
+
+/* Bit 2 : Enable or disable reception on logical address 2. */
+#define RADIO_RXADDRESSES_ADDR2_Pos (2UL) /*!< Position of ADDR2 field. */
+#define RADIO_RXADDRESSES_ADDR2_Msk (0x1UL << RADIO_RXADDRESSES_ADDR2_Pos) /*!< Bit mask of ADDR2 field. */
+#define RADIO_RXADDRESSES_ADDR2_Disabled (0UL) /*!< Disable */
+#define RADIO_RXADDRESSES_ADDR2_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable reception on logical address 1. */
+#define RADIO_RXADDRESSES_ADDR1_Pos (1UL) /*!< Position of ADDR1 field. */
+#define RADIO_RXADDRESSES_ADDR1_Msk (0x1UL << RADIO_RXADDRESSES_ADDR1_Pos) /*!< Bit mask of ADDR1 field. */
+#define RADIO_RXADDRESSES_ADDR1_Disabled (0UL) /*!< Disable */
+#define RADIO_RXADDRESSES_ADDR1_Enabled (1UL) /*!< Enable */
+
+/* Bit 0 : Enable or disable reception on logical address 0. */
+#define RADIO_RXADDRESSES_ADDR0_Pos (0UL) /*!< Position of ADDR0 field. */
+#define RADIO_RXADDRESSES_ADDR0_Msk (0x1UL << RADIO_RXADDRESSES_ADDR0_Pos) /*!< Bit mask of ADDR0 field. */
+#define RADIO_RXADDRESSES_ADDR0_Disabled (0UL) /*!< Disable */
+#define RADIO_RXADDRESSES_ADDR0_Enabled (1UL) /*!< Enable */
+
+/* Register: RADIO_CRCCNF */
+/* Description: CRC configuration */
+
+/* Bit 8 : Include or exclude packet address field out of CRC calculation. */
+#define RADIO_CRCCNF_SKIPADDR_Pos (8UL) /*!< Position of SKIPADDR field. */
+#define RADIO_CRCCNF_SKIPADDR_Msk (0x1UL << RADIO_CRCCNF_SKIPADDR_Pos) /*!< Bit mask of SKIPADDR field. */
+#define RADIO_CRCCNF_SKIPADDR_Include (0UL) /*!< CRC calculation includes address field */
+#define RADIO_CRCCNF_SKIPADDR_Skip (1UL) /*!< CRC calculation does not include address field. The CRC calculation will start at the first byte after the address. */
+
+/* Bits 1..0 : CRC length in number of bytes. */
+#define RADIO_CRCCNF_LEN_Pos (0UL) /*!< Position of LEN field. */
+#define RADIO_CRCCNF_LEN_Msk (0x3UL << RADIO_CRCCNF_LEN_Pos) /*!< Bit mask of LEN field. */
+#define RADIO_CRCCNF_LEN_Disabled (0UL) /*!< CRC length is zero and CRC calculation is disabled */
+#define RADIO_CRCCNF_LEN_One (1UL) /*!< CRC length is one byte and CRC calculation is enabled */
+#define RADIO_CRCCNF_LEN_Two (2UL) /*!< CRC length is two bytes and CRC calculation is enabled */
+#define RADIO_CRCCNF_LEN_Three (3UL) /*!< CRC length is three bytes and CRC calculation is enabled */
+
+/* Register: RADIO_CRCPOLY */
+/* Description: CRC polynomial */
+
+/* Bits 23..0 : CRC polynomial */
+#define RADIO_CRCPOLY_CRCPOLY_Pos (0UL) /*!< Position of CRCPOLY field. */
+#define RADIO_CRCPOLY_CRCPOLY_Msk (0xFFFFFFUL << RADIO_CRCPOLY_CRCPOLY_Pos) /*!< Bit mask of CRCPOLY field. */
+
+/* Register: RADIO_CRCINIT */
+/* Description: CRC initial value */
+
+/* Bits 23..0 : CRC initial value */
+#define RADIO_CRCINIT_CRCINIT_Pos (0UL) /*!< Position of CRCINIT field. */
+#define RADIO_CRCINIT_CRCINIT_Msk (0xFFFFFFUL << RADIO_CRCINIT_CRCINIT_Pos) /*!< Bit mask of CRCINIT field. */
+
+/* Register: RADIO_TIFS */
+/* Description: Inter Frame Spacing in us */
+
+/* Bits 7..0 : Inter Frame Spacing in us */
+#define RADIO_TIFS_TIFS_Pos (0UL) /*!< Position of TIFS field. */
+#define RADIO_TIFS_TIFS_Msk (0xFFUL << RADIO_TIFS_TIFS_Pos) /*!< Bit mask of TIFS field. */
+
+/* Register: RADIO_RSSISAMPLE */
+/* Description: RSSI sample */
+
+/* Bits 6..0 : RSSI sample */
+#define RADIO_RSSISAMPLE_RSSISAMPLE_Pos (0UL) /*!< Position of RSSISAMPLE field. */
+#define RADIO_RSSISAMPLE_RSSISAMPLE_Msk (0x7FUL << RADIO_RSSISAMPLE_RSSISAMPLE_Pos) /*!< Bit mask of RSSISAMPLE field. */
+
+/* Register: RADIO_STATE */
+/* Description: Current radio state */
+
+/* Bits 3..0 : Current radio state */
+#define RADIO_STATE_STATE_Pos (0UL) /*!< Position of STATE field. */
+#define RADIO_STATE_STATE_Msk (0xFUL << RADIO_STATE_STATE_Pos) /*!< Bit mask of STATE field. */
+#define RADIO_STATE_STATE_Disabled (0UL) /*!< RADIO is in the Disabled state */
+#define RADIO_STATE_STATE_RxRu (1UL) /*!< RADIO is in the RXRU state */
+#define RADIO_STATE_STATE_RxIdle (2UL) /*!< RADIO is in the RXIDLE state */
+#define RADIO_STATE_STATE_Rx (3UL) /*!< RADIO is in the RX state */
+#define RADIO_STATE_STATE_RxDisable (4UL) /*!< RADIO is in the RXDISABLED state */
+#define RADIO_STATE_STATE_TxRu (9UL) /*!< RADIO is in the TXRU state */
+#define RADIO_STATE_STATE_TxIdle (10UL) /*!< RADIO is in the TXIDLE state */
+#define RADIO_STATE_STATE_Tx (11UL) /*!< RADIO is in the TX state */
+#define RADIO_STATE_STATE_TxDisable (12UL) /*!< RADIO is in the TXDISABLED state */
+
+/* Register: RADIO_DATAWHITEIV */
+/* Description: Data whitening initial value */
+
+/* Bits 6..0 : Data whitening initial value. Bit 6 is hard-wired to '1', writing '0' to it has no effect, and it will always be read back and used by the device as '1'. */
+#define RADIO_DATAWHITEIV_DATAWHITEIV_Pos (0UL) /*!< Position of DATAWHITEIV field. */
+#define RADIO_DATAWHITEIV_DATAWHITEIV_Msk (0x7FUL << RADIO_DATAWHITEIV_DATAWHITEIV_Pos) /*!< Bit mask of DATAWHITEIV field. */
+
+/* Register: RADIO_BCC */
+/* Description: Bit counter compare */
+
+/* Bits 31..0 : Bit counter compare */
+#define RADIO_BCC_BCC_Pos (0UL) /*!< Position of BCC field. */
+#define RADIO_BCC_BCC_Msk (0xFFFFFFFFUL << RADIO_BCC_BCC_Pos) /*!< Bit mask of BCC field. */
+
+/* Register: RADIO_DAB */
+/* Description: Description collection[0]: Device address base segment 0 */
+
+/* Bits 31..0 : Device address base segment 0 */
+#define RADIO_DAB_DAB_Pos (0UL) /*!< Position of DAB field. */
+#define RADIO_DAB_DAB_Msk (0xFFFFFFFFUL << RADIO_DAB_DAB_Pos) /*!< Bit mask of DAB field. */
+
+/* Register: RADIO_DAP */
+/* Description: Description collection[0]: Device address prefix 0 */
+
+/* Bits 15..0 : Device address prefix 0 */
+#define RADIO_DAP_DAP_Pos (0UL) /*!< Position of DAP field. */
+#define RADIO_DAP_DAP_Msk (0xFFFFUL << RADIO_DAP_DAP_Pos) /*!< Bit mask of DAP field. */
+
+/* Register: RADIO_DACNF */
+/* Description: Device address match configuration */
+
+/* Bit 15 : TxAdd for device address 7 */
+#define RADIO_DACNF_TXADD7_Pos (15UL) /*!< Position of TXADD7 field. */
+#define RADIO_DACNF_TXADD7_Msk (0x1UL << RADIO_DACNF_TXADD7_Pos) /*!< Bit mask of TXADD7 field. */
+
+/* Bit 14 : TxAdd for device address 6 */
+#define RADIO_DACNF_TXADD6_Pos (14UL) /*!< Position of TXADD6 field. */
+#define RADIO_DACNF_TXADD6_Msk (0x1UL << RADIO_DACNF_TXADD6_Pos) /*!< Bit mask of TXADD6 field. */
+
+/* Bit 13 : TxAdd for device address 5 */
+#define RADIO_DACNF_TXADD5_Pos (13UL) /*!< Position of TXADD5 field. */
+#define RADIO_DACNF_TXADD5_Msk (0x1UL << RADIO_DACNF_TXADD5_Pos) /*!< Bit mask of TXADD5 field. */
+
+/* Bit 12 : TxAdd for device address 4 */
+#define RADIO_DACNF_TXADD4_Pos (12UL) /*!< Position of TXADD4 field. */
+#define RADIO_DACNF_TXADD4_Msk (0x1UL << RADIO_DACNF_TXADD4_Pos) /*!< Bit mask of TXADD4 field. */
+
+/* Bit 11 : TxAdd for device address 3 */
+#define RADIO_DACNF_TXADD3_Pos (11UL) /*!< Position of TXADD3 field. */
+#define RADIO_DACNF_TXADD3_Msk (0x1UL << RADIO_DACNF_TXADD3_Pos) /*!< Bit mask of TXADD3 field. */
+
+/* Bit 10 : TxAdd for device address 2 */
+#define RADIO_DACNF_TXADD2_Pos (10UL) /*!< Position of TXADD2 field. */
+#define RADIO_DACNF_TXADD2_Msk (0x1UL << RADIO_DACNF_TXADD2_Pos) /*!< Bit mask of TXADD2 field. */
+
+/* Bit 9 : TxAdd for device address 1 */
+#define RADIO_DACNF_TXADD1_Pos (9UL) /*!< Position of TXADD1 field. */
+#define RADIO_DACNF_TXADD1_Msk (0x1UL << RADIO_DACNF_TXADD1_Pos) /*!< Bit mask of TXADD1 field. */
+
+/* Bit 8 : TxAdd for device address 0 */
+#define RADIO_DACNF_TXADD0_Pos (8UL) /*!< Position of TXADD0 field. */
+#define RADIO_DACNF_TXADD0_Msk (0x1UL << RADIO_DACNF_TXADD0_Pos) /*!< Bit mask of TXADD0 field. */
+
+/* Bit 7 : Enable or disable device address matching using device address 7 */
+#define RADIO_DACNF_ENA7_Pos (7UL) /*!< Position of ENA7 field. */
+#define RADIO_DACNF_ENA7_Msk (0x1UL << RADIO_DACNF_ENA7_Pos) /*!< Bit mask of ENA7 field. */
+#define RADIO_DACNF_ENA7_Disabled (0UL) /*!< Disabled */
+#define RADIO_DACNF_ENA7_Enabled (1UL) /*!< Enabled */
+
+/* Bit 6 : Enable or disable device address matching using device address 6 */
+#define RADIO_DACNF_ENA6_Pos (6UL) /*!< Position of ENA6 field. */
+#define RADIO_DACNF_ENA6_Msk (0x1UL << RADIO_DACNF_ENA6_Pos) /*!< Bit mask of ENA6 field. */
+#define RADIO_DACNF_ENA6_Disabled (0UL) /*!< Disabled */
+#define RADIO_DACNF_ENA6_Enabled (1UL) /*!< Enabled */
+
+/* Bit 5 : Enable or disable device address matching using device address 5 */
+#define RADIO_DACNF_ENA5_Pos (5UL) /*!< Position of ENA5 field. */
+#define RADIO_DACNF_ENA5_Msk (0x1UL << RADIO_DACNF_ENA5_Pos) /*!< Bit mask of ENA5 field. */
+#define RADIO_DACNF_ENA5_Disabled (0UL) /*!< Disabled */
+#define RADIO_DACNF_ENA5_Enabled (1UL) /*!< Enabled */
+
+/* Bit 4 : Enable or disable device address matching using device address 4 */
+#define RADIO_DACNF_ENA4_Pos (4UL) /*!< Position of ENA4 field. */
+#define RADIO_DACNF_ENA4_Msk (0x1UL << RADIO_DACNF_ENA4_Pos) /*!< Bit mask of ENA4 field. */
+#define RADIO_DACNF_ENA4_Disabled (0UL) /*!< Disabled */
+#define RADIO_DACNF_ENA4_Enabled (1UL) /*!< Enabled */
+
+/* Bit 3 : Enable or disable device address matching using device address 3 */
+#define RADIO_DACNF_ENA3_Pos (3UL) /*!< Position of ENA3 field. */
+#define RADIO_DACNF_ENA3_Msk (0x1UL << RADIO_DACNF_ENA3_Pos) /*!< Bit mask of ENA3 field. */
+#define RADIO_DACNF_ENA3_Disabled (0UL) /*!< Disabled */
+#define RADIO_DACNF_ENA3_Enabled (1UL) /*!< Enabled */
+
+/* Bit 2 : Enable or disable device address matching using device address 2 */
+#define RADIO_DACNF_ENA2_Pos (2UL) /*!< Position of ENA2 field. */
+#define RADIO_DACNF_ENA2_Msk (0x1UL << RADIO_DACNF_ENA2_Pos) /*!< Bit mask of ENA2 field. */
+#define RADIO_DACNF_ENA2_Disabled (0UL) /*!< Disabled */
+#define RADIO_DACNF_ENA2_Enabled (1UL) /*!< Enabled */
+
+/* Bit 1 : Enable or disable device address matching using device address 1 */
+#define RADIO_DACNF_ENA1_Pos (1UL) /*!< Position of ENA1 field. */
+#define RADIO_DACNF_ENA1_Msk (0x1UL << RADIO_DACNF_ENA1_Pos) /*!< Bit mask of ENA1 field. */
+#define RADIO_DACNF_ENA1_Disabled (0UL) /*!< Disabled */
+#define RADIO_DACNF_ENA1_Enabled (1UL) /*!< Enabled */
+
+/* Bit 0 : Enable or disable device address matching using device address 0 */
+#define RADIO_DACNF_ENA0_Pos (0UL) /*!< Position of ENA0 field. */
+#define RADIO_DACNF_ENA0_Msk (0x1UL << RADIO_DACNF_ENA0_Pos) /*!< Bit mask of ENA0 field. */
+#define RADIO_DACNF_ENA0_Disabled (0UL) /*!< Disabled */
+#define RADIO_DACNF_ENA0_Enabled (1UL) /*!< Enabled */
+
+/* Register: RADIO_MODECNF0 */
+/* Description: Radio mode configuration register 0 */
+
+/* Bits 9..8 : Default TX value */
+#define RADIO_MODECNF0_DTX_Pos (8UL) /*!< Position of DTX field. */
+#define RADIO_MODECNF0_DTX_Msk (0x3UL << RADIO_MODECNF0_DTX_Pos) /*!< Bit mask of DTX field. */
+#define RADIO_MODECNF0_DTX_B1 (0UL) /*!< Transmit '1' */
+#define RADIO_MODECNF0_DTX_B0 (1UL) /*!< Transmit '0' */
+#define RADIO_MODECNF0_DTX_Center (2UL) /*!< Transmit center frequency */
+
+/* Bit 0 : Radio ramp-up time */
+#define RADIO_MODECNF0_RU_Pos (0UL) /*!< Position of RU field. */
+#define RADIO_MODECNF0_RU_Msk (0x1UL << RADIO_MODECNF0_RU_Pos) /*!< Bit mask of RU field. */
+#define RADIO_MODECNF0_RU_Default (0UL) /*!< Default ramp-up time (tRXEN), compatible with firmware written for nRF51 */
+#define RADIO_MODECNF0_RU_Fast (1UL) /*!< Fast ramp-up (tRXEN,FAST), see electrical specification for more information */
+
+/* Register: RADIO_POWER */
+/* Description: Peripheral power control */
+
+/* Bit 0 : Peripheral power control. The peripheral and its registers will be reset to its initial state by switching the peripheral off and then back on again. */
+#define RADIO_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define RADIO_POWER_POWER_Msk (0x1UL << RADIO_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define RADIO_POWER_POWER_Disabled (0UL) /*!< Peripheral is powered off */
+#define RADIO_POWER_POWER_Enabled (1UL) /*!< Peripheral is powered on */
+
+
+/* Peripheral: RNG */
+/* Description: Random Number Generator */
+
+/* Register: RNG_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 0 : Shortcut between VALRDY event and STOP task */
+#define RNG_SHORTS_VALRDY_STOP_Pos (0UL) /*!< Position of VALRDY_STOP field. */
+#define RNG_SHORTS_VALRDY_STOP_Msk (0x1UL << RNG_SHORTS_VALRDY_STOP_Pos) /*!< Bit mask of VALRDY_STOP field. */
+#define RNG_SHORTS_VALRDY_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define RNG_SHORTS_VALRDY_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: RNG_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 0 : Write '1' to Enable interrupt for VALRDY event */
+#define RNG_INTENSET_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */
+#define RNG_INTENSET_VALRDY_Msk (0x1UL << RNG_INTENSET_VALRDY_Pos) /*!< Bit mask of VALRDY field. */
+#define RNG_INTENSET_VALRDY_Disabled (0UL) /*!< Read: Disabled */
+#define RNG_INTENSET_VALRDY_Enabled (1UL) /*!< Read: Enabled */
+#define RNG_INTENSET_VALRDY_Set (1UL) /*!< Enable */
+
+/* Register: RNG_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 0 : Write '1' to Disable interrupt for VALRDY event */
+#define RNG_INTENCLR_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */
+#define RNG_INTENCLR_VALRDY_Msk (0x1UL << RNG_INTENCLR_VALRDY_Pos) /*!< Bit mask of VALRDY field. */
+#define RNG_INTENCLR_VALRDY_Disabled (0UL) /*!< Read: Disabled */
+#define RNG_INTENCLR_VALRDY_Enabled (1UL) /*!< Read: Enabled */
+#define RNG_INTENCLR_VALRDY_Clear (1UL) /*!< Disable */
+
+/* Register: RNG_CONFIG */
+/* Description: Configuration register */
+
+/* Bit 0 : Bias correction */
+#define RNG_CONFIG_DERCEN_Pos (0UL) /*!< Position of DERCEN field. */
+#define RNG_CONFIG_DERCEN_Msk (0x1UL << RNG_CONFIG_DERCEN_Pos) /*!< Bit mask of DERCEN field. */
+#define RNG_CONFIG_DERCEN_Disabled (0UL) /*!< Disabled */
+#define RNG_CONFIG_DERCEN_Enabled (1UL) /*!< Enabled */
+
+/* Register: RNG_VALUE */
+/* Description: Output random number */
+
+/* Bits 7..0 : Generated random number */
+#define RNG_VALUE_VALUE_Pos (0UL) /*!< Position of VALUE field. */
+#define RNG_VALUE_VALUE_Msk (0xFFUL << RNG_VALUE_VALUE_Pos) /*!< Bit mask of VALUE field. */
+
+
+/* Peripheral: RTC */
+/* Description: Real time counter 0 */
+
+/* Register: RTC_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 19 : Write '1' to Enable interrupt for COMPARE[3] event */
+#define RTC_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_INTENSET_COMPARE3_Msk (0x1UL << RTC_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_INTENSET_COMPARE3_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_INTENSET_COMPARE3_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_INTENSET_COMPARE3_Set (1UL) /*!< Enable */
+
+/* Bit 18 : Write '1' to Enable interrupt for COMPARE[2] event */
+#define RTC_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_INTENSET_COMPARE2_Msk (0x1UL << RTC_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_INTENSET_COMPARE2_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_INTENSET_COMPARE2_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_INTENSET_COMPARE2_Set (1UL) /*!< Enable */
+
+/* Bit 17 : Write '1' to Enable interrupt for COMPARE[1] event */
+#define RTC_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_INTENSET_COMPARE1_Msk (0x1UL << RTC_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_INTENSET_COMPARE1_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_INTENSET_COMPARE1_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_INTENSET_COMPARE1_Set (1UL) /*!< Enable */
+
+/* Bit 16 : Write '1' to Enable interrupt for COMPARE[0] event */
+#define RTC_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_INTENSET_COMPARE0_Msk (0x1UL << RTC_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_INTENSET_COMPARE0_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_INTENSET_COMPARE0_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_INTENSET_COMPARE0_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for OVRFLW event */
+#define RTC_INTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_INTENSET_OVRFLW_Msk (0x1UL << RTC_INTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_INTENSET_OVRFLW_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_INTENSET_OVRFLW_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_INTENSET_OVRFLW_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for TICK event */
+#define RTC_INTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_INTENSET_TICK_Msk (0x1UL << RTC_INTENSET_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_INTENSET_TICK_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_INTENSET_TICK_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_INTENSET_TICK_Set (1UL) /*!< Enable */
+
+/* Register: RTC_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 19 : Write '1' to Disable interrupt for COMPARE[3] event */
+#define RTC_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_INTENCLR_COMPARE3_Msk (0x1UL << RTC_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_INTENCLR_COMPARE3_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_INTENCLR_COMPARE3_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable */
+
+/* Bit 18 : Write '1' to Disable interrupt for COMPARE[2] event */
+#define RTC_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_INTENCLR_COMPARE2_Msk (0x1UL << RTC_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_INTENCLR_COMPARE2_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_INTENCLR_COMPARE2_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable */
+
+/* Bit 17 : Write '1' to Disable interrupt for COMPARE[1] event */
+#define RTC_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_INTENCLR_COMPARE1_Msk (0x1UL << RTC_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_INTENCLR_COMPARE1_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_INTENCLR_COMPARE1_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable */
+
+/* Bit 16 : Write '1' to Disable interrupt for COMPARE[0] event */
+#define RTC_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_INTENCLR_COMPARE0_Msk (0x1UL << RTC_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_INTENCLR_COMPARE0_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_INTENCLR_COMPARE0_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for OVRFLW event */
+#define RTC_INTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_INTENCLR_OVRFLW_Msk (0x1UL << RTC_INTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_INTENCLR_OVRFLW_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_INTENCLR_OVRFLW_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_INTENCLR_OVRFLW_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for TICK event */
+#define RTC_INTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_INTENCLR_TICK_Msk (0x1UL << RTC_INTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_INTENCLR_TICK_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_INTENCLR_TICK_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_INTENCLR_TICK_Clear (1UL) /*!< Disable */
+
+/* Register: RTC_EVTEN */
+/* Description: Enable or disable event routing */
+
+/* Bit 19 : Enable or disable event routing for COMPARE[3] event */
+#define RTC_EVTEN_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_EVTEN_COMPARE3_Msk (0x1UL << RTC_EVTEN_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_EVTEN_COMPARE3_Disabled (0UL) /*!< Disable */
+#define RTC_EVTEN_COMPARE3_Enabled (1UL) /*!< Enable */
+
+/* Bit 18 : Enable or disable event routing for COMPARE[2] event */
+#define RTC_EVTEN_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_EVTEN_COMPARE2_Msk (0x1UL << RTC_EVTEN_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_EVTEN_COMPARE2_Disabled (0UL) /*!< Disable */
+#define RTC_EVTEN_COMPARE2_Enabled (1UL) /*!< Enable */
+
+/* Bit 17 : Enable or disable event routing for COMPARE[1] event */
+#define RTC_EVTEN_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_EVTEN_COMPARE1_Msk (0x1UL << RTC_EVTEN_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_EVTEN_COMPARE1_Disabled (0UL) /*!< Disable */
+#define RTC_EVTEN_COMPARE1_Enabled (1UL) /*!< Enable */
+
+/* Bit 16 : Enable or disable event routing for COMPARE[0] event */
+#define RTC_EVTEN_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_EVTEN_COMPARE0_Msk (0x1UL << RTC_EVTEN_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_EVTEN_COMPARE0_Disabled (0UL) /*!< Disable */
+#define RTC_EVTEN_COMPARE0_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable event routing for OVRFLW event */
+#define RTC_EVTEN_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_EVTEN_OVRFLW_Msk (0x1UL << RTC_EVTEN_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_EVTEN_OVRFLW_Disabled (0UL) /*!< Disable */
+#define RTC_EVTEN_OVRFLW_Enabled (1UL) /*!< Enable */
+
+/* Bit 0 : Enable or disable event routing for TICK event */
+#define RTC_EVTEN_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_EVTEN_TICK_Msk (0x1UL << RTC_EVTEN_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_EVTEN_TICK_Disabled (0UL) /*!< Disable */
+#define RTC_EVTEN_TICK_Enabled (1UL) /*!< Enable */
+
+/* Register: RTC_EVTENSET */
+/* Description: Enable event routing */
+
+/* Bit 19 : Write '1' to Enable event routing for COMPARE[3] event */
+#define RTC_EVTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_EVTENSET_COMPARE3_Msk (0x1UL << RTC_EVTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_EVTENSET_COMPARE3_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_EVTENSET_COMPARE3_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_EVTENSET_COMPARE3_Set (1UL) /*!< Enable */
+
+/* Bit 18 : Write '1' to Enable event routing for COMPARE[2] event */
+#define RTC_EVTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_EVTENSET_COMPARE2_Msk (0x1UL << RTC_EVTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_EVTENSET_COMPARE2_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_EVTENSET_COMPARE2_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_EVTENSET_COMPARE2_Set (1UL) /*!< Enable */
+
+/* Bit 17 : Write '1' to Enable event routing for COMPARE[1] event */
+#define RTC_EVTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_EVTENSET_COMPARE1_Msk (0x1UL << RTC_EVTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_EVTENSET_COMPARE1_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_EVTENSET_COMPARE1_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_EVTENSET_COMPARE1_Set (1UL) /*!< Enable */
+
+/* Bit 16 : Write '1' to Enable event routing for COMPARE[0] event */
+#define RTC_EVTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_EVTENSET_COMPARE0_Msk (0x1UL << RTC_EVTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_EVTENSET_COMPARE0_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_EVTENSET_COMPARE0_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_EVTENSET_COMPARE0_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable event routing for OVRFLW event */
+#define RTC_EVTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_EVTENSET_OVRFLW_Msk (0x1UL << RTC_EVTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_EVTENSET_OVRFLW_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_EVTENSET_OVRFLW_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_EVTENSET_OVRFLW_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable event routing for TICK event */
+#define RTC_EVTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_EVTENSET_TICK_Msk (0x1UL << RTC_EVTENSET_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_EVTENSET_TICK_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_EVTENSET_TICK_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_EVTENSET_TICK_Set (1UL) /*!< Enable */
+
+/* Register: RTC_EVTENCLR */
+/* Description: Disable event routing */
+
+/* Bit 19 : Write '1' to Disable event routing for COMPARE[3] event */
+#define RTC_EVTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_EVTENCLR_COMPARE3_Msk (0x1UL << RTC_EVTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_EVTENCLR_COMPARE3_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_EVTENCLR_COMPARE3_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_EVTENCLR_COMPARE3_Clear (1UL) /*!< Disable */
+
+/* Bit 18 : Write '1' to Disable event routing for COMPARE[2] event */
+#define RTC_EVTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_EVTENCLR_COMPARE2_Msk (0x1UL << RTC_EVTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_EVTENCLR_COMPARE2_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_EVTENCLR_COMPARE2_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_EVTENCLR_COMPARE2_Clear (1UL) /*!< Disable */
+
+/* Bit 17 : Write '1' to Disable event routing for COMPARE[1] event */
+#define RTC_EVTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_EVTENCLR_COMPARE1_Msk (0x1UL << RTC_EVTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_EVTENCLR_COMPARE1_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_EVTENCLR_COMPARE1_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_EVTENCLR_COMPARE1_Clear (1UL) /*!< Disable */
+
+/* Bit 16 : Write '1' to Disable event routing for COMPARE[0] event */
+#define RTC_EVTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_EVTENCLR_COMPARE0_Msk (0x1UL << RTC_EVTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_EVTENCLR_COMPARE0_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_EVTENCLR_COMPARE0_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_EVTENCLR_COMPARE0_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable event routing for OVRFLW event */
+#define RTC_EVTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_EVTENCLR_OVRFLW_Msk (0x1UL << RTC_EVTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_EVTENCLR_OVRFLW_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_EVTENCLR_OVRFLW_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_EVTENCLR_OVRFLW_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable event routing for TICK event */
+#define RTC_EVTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_EVTENCLR_TICK_Msk (0x1UL << RTC_EVTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_EVTENCLR_TICK_Disabled (0UL) /*!< Read: Disabled */
+#define RTC_EVTENCLR_TICK_Enabled (1UL) /*!< Read: Enabled */
+#define RTC_EVTENCLR_TICK_Clear (1UL) /*!< Disable */
+
+/* Register: RTC_COUNTER */
+/* Description: Current COUNTER value */
+
+/* Bits 23..0 : Counter value */
+#define RTC_COUNTER_COUNTER_Pos (0UL) /*!< Position of COUNTER field. */
+#define RTC_COUNTER_COUNTER_Msk (0xFFFFFFUL << RTC_COUNTER_COUNTER_Pos) /*!< Bit mask of COUNTER field. */
+
+/* Register: RTC_PRESCALER */
+/* Description: 12 bit prescaler for COUNTER frequency (32768/(PRESCALER+1)).Must be written when RTC is stopped */
+
+/* Bits 11..0 : Prescaler value */
+#define RTC_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */
+#define RTC_PRESCALER_PRESCALER_Msk (0xFFFUL << RTC_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */
+
+/* Register: RTC_CC */
+/* Description: Description collection[0]: Compare register 0 */
+
+/* Bits 23..0 : Compare value */
+#define RTC_CC_COMPARE_Pos (0UL) /*!< Position of COMPARE field. */
+#define RTC_CC_COMPARE_Msk (0xFFFFFFUL << RTC_CC_COMPARE_Pos) /*!< Bit mask of COMPARE field. */
+
+
+/* Peripheral: SAADC */
+/* Description: Analog to Digital Converter */
+
+/* Register: SAADC_INTEN */
+/* Description: Enable or disable interrupt */
+
+/* Bit 21 : Enable or disable interrupt for CH[7].LIMITL event */
+#define SAADC_INTEN_CH7LIMITL_Pos (21UL) /*!< Position of CH7LIMITL field. */
+#define SAADC_INTEN_CH7LIMITL_Msk (0x1UL << SAADC_INTEN_CH7LIMITL_Pos) /*!< Bit mask of CH7LIMITL field. */
+#define SAADC_INTEN_CH7LIMITL_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH7LIMITL_Enabled (1UL) /*!< Enable */
+
+/* Bit 20 : Enable or disable interrupt for CH[7].LIMITH event */
+#define SAADC_INTEN_CH7LIMITH_Pos (20UL) /*!< Position of CH7LIMITH field. */
+#define SAADC_INTEN_CH7LIMITH_Msk (0x1UL << SAADC_INTEN_CH7LIMITH_Pos) /*!< Bit mask of CH7LIMITH field. */
+#define SAADC_INTEN_CH7LIMITH_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH7LIMITH_Enabled (1UL) /*!< Enable */
+
+/* Bit 19 : Enable or disable interrupt for CH[6].LIMITL event */
+#define SAADC_INTEN_CH6LIMITL_Pos (19UL) /*!< Position of CH6LIMITL field. */
+#define SAADC_INTEN_CH6LIMITL_Msk (0x1UL << SAADC_INTEN_CH6LIMITL_Pos) /*!< Bit mask of CH6LIMITL field. */
+#define SAADC_INTEN_CH6LIMITL_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH6LIMITL_Enabled (1UL) /*!< Enable */
+
+/* Bit 18 : Enable or disable interrupt for CH[6].LIMITH event */
+#define SAADC_INTEN_CH6LIMITH_Pos (18UL) /*!< Position of CH6LIMITH field. */
+#define SAADC_INTEN_CH6LIMITH_Msk (0x1UL << SAADC_INTEN_CH6LIMITH_Pos) /*!< Bit mask of CH6LIMITH field. */
+#define SAADC_INTEN_CH6LIMITH_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH6LIMITH_Enabled (1UL) /*!< Enable */
+
+/* Bit 17 : Enable or disable interrupt for CH[5].LIMITL event */
+#define SAADC_INTEN_CH5LIMITL_Pos (17UL) /*!< Position of CH5LIMITL field. */
+#define SAADC_INTEN_CH5LIMITL_Msk (0x1UL << SAADC_INTEN_CH5LIMITL_Pos) /*!< Bit mask of CH5LIMITL field. */
+#define SAADC_INTEN_CH5LIMITL_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH5LIMITL_Enabled (1UL) /*!< Enable */
+
+/* Bit 16 : Enable or disable interrupt for CH[5].LIMITH event */
+#define SAADC_INTEN_CH5LIMITH_Pos (16UL) /*!< Position of CH5LIMITH field. */
+#define SAADC_INTEN_CH5LIMITH_Msk (0x1UL << SAADC_INTEN_CH5LIMITH_Pos) /*!< Bit mask of CH5LIMITH field. */
+#define SAADC_INTEN_CH5LIMITH_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH5LIMITH_Enabled (1UL) /*!< Enable */
+
+/* Bit 15 : Enable or disable interrupt for CH[4].LIMITL event */
+#define SAADC_INTEN_CH4LIMITL_Pos (15UL) /*!< Position of CH4LIMITL field. */
+#define SAADC_INTEN_CH4LIMITL_Msk (0x1UL << SAADC_INTEN_CH4LIMITL_Pos) /*!< Bit mask of CH4LIMITL field. */
+#define SAADC_INTEN_CH4LIMITL_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH4LIMITL_Enabled (1UL) /*!< Enable */
+
+/* Bit 14 : Enable or disable interrupt for CH[4].LIMITH event */
+#define SAADC_INTEN_CH4LIMITH_Pos (14UL) /*!< Position of CH4LIMITH field. */
+#define SAADC_INTEN_CH4LIMITH_Msk (0x1UL << SAADC_INTEN_CH4LIMITH_Pos) /*!< Bit mask of CH4LIMITH field. */
+#define SAADC_INTEN_CH4LIMITH_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH4LIMITH_Enabled (1UL) /*!< Enable */
+
+/* Bit 13 : Enable or disable interrupt for CH[3].LIMITL event */
+#define SAADC_INTEN_CH3LIMITL_Pos (13UL) /*!< Position of CH3LIMITL field. */
+#define SAADC_INTEN_CH3LIMITL_Msk (0x1UL << SAADC_INTEN_CH3LIMITL_Pos) /*!< Bit mask of CH3LIMITL field. */
+#define SAADC_INTEN_CH3LIMITL_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH3LIMITL_Enabled (1UL) /*!< Enable */
+
+/* Bit 12 : Enable or disable interrupt for CH[3].LIMITH event */
+#define SAADC_INTEN_CH3LIMITH_Pos (12UL) /*!< Position of CH3LIMITH field. */
+#define SAADC_INTEN_CH3LIMITH_Msk (0x1UL << SAADC_INTEN_CH3LIMITH_Pos) /*!< Bit mask of CH3LIMITH field. */
+#define SAADC_INTEN_CH3LIMITH_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH3LIMITH_Enabled (1UL) /*!< Enable */
+
+/* Bit 11 : Enable or disable interrupt for CH[2].LIMITL event */
+#define SAADC_INTEN_CH2LIMITL_Pos (11UL) /*!< Position of CH2LIMITL field. */
+#define SAADC_INTEN_CH2LIMITL_Msk (0x1UL << SAADC_INTEN_CH2LIMITL_Pos) /*!< Bit mask of CH2LIMITL field. */
+#define SAADC_INTEN_CH2LIMITL_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH2LIMITL_Enabled (1UL) /*!< Enable */
+
+/* Bit 10 : Enable or disable interrupt for CH[2].LIMITH event */
+#define SAADC_INTEN_CH2LIMITH_Pos (10UL) /*!< Position of CH2LIMITH field. */
+#define SAADC_INTEN_CH2LIMITH_Msk (0x1UL << SAADC_INTEN_CH2LIMITH_Pos) /*!< Bit mask of CH2LIMITH field. */
+#define SAADC_INTEN_CH2LIMITH_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH2LIMITH_Enabled (1UL) /*!< Enable */
+
+/* Bit 9 : Enable or disable interrupt for CH[1].LIMITL event */
+#define SAADC_INTEN_CH1LIMITL_Pos (9UL) /*!< Position of CH1LIMITL field. */
+#define SAADC_INTEN_CH1LIMITL_Msk (0x1UL << SAADC_INTEN_CH1LIMITL_Pos) /*!< Bit mask of CH1LIMITL field. */
+#define SAADC_INTEN_CH1LIMITL_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH1LIMITL_Enabled (1UL) /*!< Enable */
+
+/* Bit 8 : Enable or disable interrupt for CH[1].LIMITH event */
+#define SAADC_INTEN_CH1LIMITH_Pos (8UL) /*!< Position of CH1LIMITH field. */
+#define SAADC_INTEN_CH1LIMITH_Msk (0x1UL << SAADC_INTEN_CH1LIMITH_Pos) /*!< Bit mask of CH1LIMITH field. */
+#define SAADC_INTEN_CH1LIMITH_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH1LIMITH_Enabled (1UL) /*!< Enable */
+
+/* Bit 7 : Enable or disable interrupt for CH[0].LIMITL event */
+#define SAADC_INTEN_CH0LIMITL_Pos (7UL) /*!< Position of CH0LIMITL field. */
+#define SAADC_INTEN_CH0LIMITL_Msk (0x1UL << SAADC_INTEN_CH0LIMITL_Pos) /*!< Bit mask of CH0LIMITL field. */
+#define SAADC_INTEN_CH0LIMITL_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH0LIMITL_Enabled (1UL) /*!< Enable */
+
+/* Bit 6 : Enable or disable interrupt for CH[0].LIMITH event */
+#define SAADC_INTEN_CH0LIMITH_Pos (6UL) /*!< Position of CH0LIMITH field. */
+#define SAADC_INTEN_CH0LIMITH_Msk (0x1UL << SAADC_INTEN_CH0LIMITH_Pos) /*!< Bit mask of CH0LIMITH field. */
+#define SAADC_INTEN_CH0LIMITH_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CH0LIMITH_Enabled (1UL) /*!< Enable */
+
+/* Bit 5 : Enable or disable interrupt for STOPPED event */
+#define SAADC_INTEN_STOPPED_Pos (5UL) /*!< Position of STOPPED field. */
+#define SAADC_INTEN_STOPPED_Msk (0x1UL << SAADC_INTEN_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define SAADC_INTEN_STOPPED_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_STOPPED_Enabled (1UL) /*!< Enable */
+
+/* Bit 4 : Enable or disable interrupt for CALIBRATEDONE event */
+#define SAADC_INTEN_CALIBRATEDONE_Pos (4UL) /*!< Position of CALIBRATEDONE field. */
+#define SAADC_INTEN_CALIBRATEDONE_Msk (0x1UL << SAADC_INTEN_CALIBRATEDONE_Pos) /*!< Bit mask of CALIBRATEDONE field. */
+#define SAADC_INTEN_CALIBRATEDONE_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_CALIBRATEDONE_Enabled (1UL) /*!< Enable */
+
+/* Bit 3 : Enable or disable interrupt for RESULTDONE event */
+#define SAADC_INTEN_RESULTDONE_Pos (3UL) /*!< Position of RESULTDONE field. */
+#define SAADC_INTEN_RESULTDONE_Msk (0x1UL << SAADC_INTEN_RESULTDONE_Pos) /*!< Bit mask of RESULTDONE field. */
+#define SAADC_INTEN_RESULTDONE_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_RESULTDONE_Enabled (1UL) /*!< Enable */
+
+/* Bit 2 : Enable or disable interrupt for DONE event */
+#define SAADC_INTEN_DONE_Pos (2UL) /*!< Position of DONE field. */
+#define SAADC_INTEN_DONE_Msk (0x1UL << SAADC_INTEN_DONE_Pos) /*!< Bit mask of DONE field. */
+#define SAADC_INTEN_DONE_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_DONE_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable interrupt for END event */
+#define SAADC_INTEN_END_Pos (1UL) /*!< Position of END field. */
+#define SAADC_INTEN_END_Msk (0x1UL << SAADC_INTEN_END_Pos) /*!< Bit mask of END field. */
+#define SAADC_INTEN_END_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_END_Enabled (1UL) /*!< Enable */
+
+/* Bit 0 : Enable or disable interrupt for STARTED event */
+#define SAADC_INTEN_STARTED_Pos (0UL) /*!< Position of STARTED field. */
+#define SAADC_INTEN_STARTED_Msk (0x1UL << SAADC_INTEN_STARTED_Pos) /*!< Bit mask of STARTED field. */
+#define SAADC_INTEN_STARTED_Disabled (0UL) /*!< Disable */
+#define SAADC_INTEN_STARTED_Enabled (1UL) /*!< Enable */
+
+/* Register: SAADC_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 21 : Write '1' to Enable interrupt for CH[7].LIMITL event */
+#define SAADC_INTENSET_CH7LIMITL_Pos (21UL) /*!< Position of CH7LIMITL field. */
+#define SAADC_INTENSET_CH7LIMITL_Msk (0x1UL << SAADC_INTENSET_CH7LIMITL_Pos) /*!< Bit mask of CH7LIMITL field. */
+#define SAADC_INTENSET_CH7LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH7LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH7LIMITL_Set (1UL) /*!< Enable */
+
+/* Bit 20 : Write '1' to Enable interrupt for CH[7].LIMITH event */
+#define SAADC_INTENSET_CH7LIMITH_Pos (20UL) /*!< Position of CH7LIMITH field. */
+#define SAADC_INTENSET_CH7LIMITH_Msk (0x1UL << SAADC_INTENSET_CH7LIMITH_Pos) /*!< Bit mask of CH7LIMITH field. */
+#define SAADC_INTENSET_CH7LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH7LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH7LIMITH_Set (1UL) /*!< Enable */
+
+/* Bit 19 : Write '1' to Enable interrupt for CH[6].LIMITL event */
+#define SAADC_INTENSET_CH6LIMITL_Pos (19UL) /*!< Position of CH6LIMITL field. */
+#define SAADC_INTENSET_CH6LIMITL_Msk (0x1UL << SAADC_INTENSET_CH6LIMITL_Pos) /*!< Bit mask of CH6LIMITL field. */
+#define SAADC_INTENSET_CH6LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH6LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH6LIMITL_Set (1UL) /*!< Enable */
+
+/* Bit 18 : Write '1' to Enable interrupt for CH[6].LIMITH event */
+#define SAADC_INTENSET_CH6LIMITH_Pos (18UL) /*!< Position of CH6LIMITH field. */
+#define SAADC_INTENSET_CH6LIMITH_Msk (0x1UL << SAADC_INTENSET_CH6LIMITH_Pos) /*!< Bit mask of CH6LIMITH field. */
+#define SAADC_INTENSET_CH6LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH6LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH6LIMITH_Set (1UL) /*!< Enable */
+
+/* Bit 17 : Write '1' to Enable interrupt for CH[5].LIMITL event */
+#define SAADC_INTENSET_CH5LIMITL_Pos (17UL) /*!< Position of CH5LIMITL field. */
+#define SAADC_INTENSET_CH5LIMITL_Msk (0x1UL << SAADC_INTENSET_CH5LIMITL_Pos) /*!< Bit mask of CH5LIMITL field. */
+#define SAADC_INTENSET_CH5LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH5LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH5LIMITL_Set (1UL) /*!< Enable */
+
+/* Bit 16 : Write '1' to Enable interrupt for CH[5].LIMITH event */
+#define SAADC_INTENSET_CH5LIMITH_Pos (16UL) /*!< Position of CH5LIMITH field. */
+#define SAADC_INTENSET_CH5LIMITH_Msk (0x1UL << SAADC_INTENSET_CH5LIMITH_Pos) /*!< Bit mask of CH5LIMITH field. */
+#define SAADC_INTENSET_CH5LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH5LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH5LIMITH_Set (1UL) /*!< Enable */
+
+/* Bit 15 : Write '1' to Enable interrupt for CH[4].LIMITL event */
+#define SAADC_INTENSET_CH4LIMITL_Pos (15UL) /*!< Position of CH4LIMITL field. */
+#define SAADC_INTENSET_CH4LIMITL_Msk (0x1UL << SAADC_INTENSET_CH4LIMITL_Pos) /*!< Bit mask of CH4LIMITL field. */
+#define SAADC_INTENSET_CH4LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH4LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH4LIMITL_Set (1UL) /*!< Enable */
+
+/* Bit 14 : Write '1' to Enable interrupt for CH[4].LIMITH event */
+#define SAADC_INTENSET_CH4LIMITH_Pos (14UL) /*!< Position of CH4LIMITH field. */
+#define SAADC_INTENSET_CH4LIMITH_Msk (0x1UL << SAADC_INTENSET_CH4LIMITH_Pos) /*!< Bit mask of CH4LIMITH field. */
+#define SAADC_INTENSET_CH4LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH4LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH4LIMITH_Set (1UL) /*!< Enable */
+
+/* Bit 13 : Write '1' to Enable interrupt for CH[3].LIMITL event */
+#define SAADC_INTENSET_CH3LIMITL_Pos (13UL) /*!< Position of CH3LIMITL field. */
+#define SAADC_INTENSET_CH3LIMITL_Msk (0x1UL << SAADC_INTENSET_CH3LIMITL_Pos) /*!< Bit mask of CH3LIMITL field. */
+#define SAADC_INTENSET_CH3LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH3LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH3LIMITL_Set (1UL) /*!< Enable */
+
+/* Bit 12 : Write '1' to Enable interrupt for CH[3].LIMITH event */
+#define SAADC_INTENSET_CH3LIMITH_Pos (12UL) /*!< Position of CH3LIMITH field. */
+#define SAADC_INTENSET_CH3LIMITH_Msk (0x1UL << SAADC_INTENSET_CH3LIMITH_Pos) /*!< Bit mask of CH3LIMITH field. */
+#define SAADC_INTENSET_CH3LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH3LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH3LIMITH_Set (1UL) /*!< Enable */
+
+/* Bit 11 : Write '1' to Enable interrupt for CH[2].LIMITL event */
+#define SAADC_INTENSET_CH2LIMITL_Pos (11UL) /*!< Position of CH2LIMITL field. */
+#define SAADC_INTENSET_CH2LIMITL_Msk (0x1UL << SAADC_INTENSET_CH2LIMITL_Pos) /*!< Bit mask of CH2LIMITL field. */
+#define SAADC_INTENSET_CH2LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH2LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH2LIMITL_Set (1UL) /*!< Enable */
+
+/* Bit 10 : Write '1' to Enable interrupt for CH[2].LIMITH event */
+#define SAADC_INTENSET_CH2LIMITH_Pos (10UL) /*!< Position of CH2LIMITH field. */
+#define SAADC_INTENSET_CH2LIMITH_Msk (0x1UL << SAADC_INTENSET_CH2LIMITH_Pos) /*!< Bit mask of CH2LIMITH field. */
+#define SAADC_INTENSET_CH2LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH2LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH2LIMITH_Set (1UL) /*!< Enable */
+
+/* Bit 9 : Write '1' to Enable interrupt for CH[1].LIMITL event */
+#define SAADC_INTENSET_CH1LIMITL_Pos (9UL) /*!< Position of CH1LIMITL field. */
+#define SAADC_INTENSET_CH1LIMITL_Msk (0x1UL << SAADC_INTENSET_CH1LIMITL_Pos) /*!< Bit mask of CH1LIMITL field. */
+#define SAADC_INTENSET_CH1LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH1LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH1LIMITL_Set (1UL) /*!< Enable */
+
+/* Bit 8 : Write '1' to Enable interrupt for CH[1].LIMITH event */
+#define SAADC_INTENSET_CH1LIMITH_Pos (8UL) /*!< Position of CH1LIMITH field. */
+#define SAADC_INTENSET_CH1LIMITH_Msk (0x1UL << SAADC_INTENSET_CH1LIMITH_Pos) /*!< Bit mask of CH1LIMITH field. */
+#define SAADC_INTENSET_CH1LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH1LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH1LIMITH_Set (1UL) /*!< Enable */
+
+/* Bit 7 : Write '1' to Enable interrupt for CH[0].LIMITL event */
+#define SAADC_INTENSET_CH0LIMITL_Pos (7UL) /*!< Position of CH0LIMITL field. */
+#define SAADC_INTENSET_CH0LIMITL_Msk (0x1UL << SAADC_INTENSET_CH0LIMITL_Pos) /*!< Bit mask of CH0LIMITL field. */
+#define SAADC_INTENSET_CH0LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH0LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH0LIMITL_Set (1UL) /*!< Enable */
+
+/* Bit 6 : Write '1' to Enable interrupt for CH[0].LIMITH event */
+#define SAADC_INTENSET_CH0LIMITH_Pos (6UL) /*!< Position of CH0LIMITH field. */
+#define SAADC_INTENSET_CH0LIMITH_Msk (0x1UL << SAADC_INTENSET_CH0LIMITH_Pos) /*!< Bit mask of CH0LIMITH field. */
+#define SAADC_INTENSET_CH0LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CH0LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CH0LIMITH_Set (1UL) /*!< Enable */
+
+/* Bit 5 : Write '1' to Enable interrupt for STOPPED event */
+#define SAADC_INTENSET_STOPPED_Pos (5UL) /*!< Position of STOPPED field. */
+#define SAADC_INTENSET_STOPPED_Msk (0x1UL << SAADC_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define SAADC_INTENSET_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_STOPPED_Set (1UL) /*!< Enable */
+
+/* Bit 4 : Write '1' to Enable interrupt for CALIBRATEDONE event */
+#define SAADC_INTENSET_CALIBRATEDONE_Pos (4UL) /*!< Position of CALIBRATEDONE field. */
+#define SAADC_INTENSET_CALIBRATEDONE_Msk (0x1UL << SAADC_INTENSET_CALIBRATEDONE_Pos) /*!< Bit mask of CALIBRATEDONE field. */
+#define SAADC_INTENSET_CALIBRATEDONE_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_CALIBRATEDONE_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_CALIBRATEDONE_Set (1UL) /*!< Enable */
+
+/* Bit 3 : Write '1' to Enable interrupt for RESULTDONE event */
+#define SAADC_INTENSET_RESULTDONE_Pos (3UL) /*!< Position of RESULTDONE field. */
+#define SAADC_INTENSET_RESULTDONE_Msk (0x1UL << SAADC_INTENSET_RESULTDONE_Pos) /*!< Bit mask of RESULTDONE field. */
+#define SAADC_INTENSET_RESULTDONE_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_RESULTDONE_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_RESULTDONE_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for DONE event */
+#define SAADC_INTENSET_DONE_Pos (2UL) /*!< Position of DONE field. */
+#define SAADC_INTENSET_DONE_Msk (0x1UL << SAADC_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */
+#define SAADC_INTENSET_DONE_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_DONE_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_DONE_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for END event */
+#define SAADC_INTENSET_END_Pos (1UL) /*!< Position of END field. */
+#define SAADC_INTENSET_END_Msk (0x1UL << SAADC_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define SAADC_INTENSET_END_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_END_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_END_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for STARTED event */
+#define SAADC_INTENSET_STARTED_Pos (0UL) /*!< Position of STARTED field. */
+#define SAADC_INTENSET_STARTED_Msk (0x1UL << SAADC_INTENSET_STARTED_Pos) /*!< Bit mask of STARTED field. */
+#define SAADC_INTENSET_STARTED_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENSET_STARTED_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENSET_STARTED_Set (1UL) /*!< Enable */
+
+/* Register: SAADC_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 21 : Write '1' to Disable interrupt for CH[7].LIMITL event */
+#define SAADC_INTENCLR_CH7LIMITL_Pos (21UL) /*!< Position of CH7LIMITL field. */
+#define SAADC_INTENCLR_CH7LIMITL_Msk (0x1UL << SAADC_INTENCLR_CH7LIMITL_Pos) /*!< Bit mask of CH7LIMITL field. */
+#define SAADC_INTENCLR_CH7LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH7LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH7LIMITL_Clear (1UL) /*!< Disable */
+
+/* Bit 20 : Write '1' to Disable interrupt for CH[7].LIMITH event */
+#define SAADC_INTENCLR_CH7LIMITH_Pos (20UL) /*!< Position of CH7LIMITH field. */
+#define SAADC_INTENCLR_CH7LIMITH_Msk (0x1UL << SAADC_INTENCLR_CH7LIMITH_Pos) /*!< Bit mask of CH7LIMITH field. */
+#define SAADC_INTENCLR_CH7LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH7LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH7LIMITH_Clear (1UL) /*!< Disable */
+
+/* Bit 19 : Write '1' to Disable interrupt for CH[6].LIMITL event */
+#define SAADC_INTENCLR_CH6LIMITL_Pos (19UL) /*!< Position of CH6LIMITL field. */
+#define SAADC_INTENCLR_CH6LIMITL_Msk (0x1UL << SAADC_INTENCLR_CH6LIMITL_Pos) /*!< Bit mask of CH6LIMITL field. */
+#define SAADC_INTENCLR_CH6LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH6LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH6LIMITL_Clear (1UL) /*!< Disable */
+
+/* Bit 18 : Write '1' to Disable interrupt for CH[6].LIMITH event */
+#define SAADC_INTENCLR_CH6LIMITH_Pos (18UL) /*!< Position of CH6LIMITH field. */
+#define SAADC_INTENCLR_CH6LIMITH_Msk (0x1UL << SAADC_INTENCLR_CH6LIMITH_Pos) /*!< Bit mask of CH6LIMITH field. */
+#define SAADC_INTENCLR_CH6LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH6LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH6LIMITH_Clear (1UL) /*!< Disable */
+
+/* Bit 17 : Write '1' to Disable interrupt for CH[5].LIMITL event */
+#define SAADC_INTENCLR_CH5LIMITL_Pos (17UL) /*!< Position of CH5LIMITL field. */
+#define SAADC_INTENCLR_CH5LIMITL_Msk (0x1UL << SAADC_INTENCLR_CH5LIMITL_Pos) /*!< Bit mask of CH5LIMITL field. */
+#define SAADC_INTENCLR_CH5LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH5LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH5LIMITL_Clear (1UL) /*!< Disable */
+
+/* Bit 16 : Write '1' to Disable interrupt for CH[5].LIMITH event */
+#define SAADC_INTENCLR_CH5LIMITH_Pos (16UL) /*!< Position of CH5LIMITH field. */
+#define SAADC_INTENCLR_CH5LIMITH_Msk (0x1UL << SAADC_INTENCLR_CH5LIMITH_Pos) /*!< Bit mask of CH5LIMITH field. */
+#define SAADC_INTENCLR_CH5LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH5LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH5LIMITH_Clear (1UL) /*!< Disable */
+
+/* Bit 15 : Write '1' to Disable interrupt for CH[4].LIMITL event */
+#define SAADC_INTENCLR_CH4LIMITL_Pos (15UL) /*!< Position of CH4LIMITL field. */
+#define SAADC_INTENCLR_CH4LIMITL_Msk (0x1UL << SAADC_INTENCLR_CH4LIMITL_Pos) /*!< Bit mask of CH4LIMITL field. */
+#define SAADC_INTENCLR_CH4LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH4LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH4LIMITL_Clear (1UL) /*!< Disable */
+
+/* Bit 14 : Write '1' to Disable interrupt for CH[4].LIMITH event */
+#define SAADC_INTENCLR_CH4LIMITH_Pos (14UL) /*!< Position of CH4LIMITH field. */
+#define SAADC_INTENCLR_CH4LIMITH_Msk (0x1UL << SAADC_INTENCLR_CH4LIMITH_Pos) /*!< Bit mask of CH4LIMITH field. */
+#define SAADC_INTENCLR_CH4LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH4LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH4LIMITH_Clear (1UL) /*!< Disable */
+
+/* Bit 13 : Write '1' to Disable interrupt for CH[3].LIMITL event */
+#define SAADC_INTENCLR_CH3LIMITL_Pos (13UL) /*!< Position of CH3LIMITL field. */
+#define SAADC_INTENCLR_CH3LIMITL_Msk (0x1UL << SAADC_INTENCLR_CH3LIMITL_Pos) /*!< Bit mask of CH3LIMITL field. */
+#define SAADC_INTENCLR_CH3LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH3LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH3LIMITL_Clear (1UL) /*!< Disable */
+
+/* Bit 12 : Write '1' to Disable interrupt for CH[3].LIMITH event */
+#define SAADC_INTENCLR_CH3LIMITH_Pos (12UL) /*!< Position of CH3LIMITH field. */
+#define SAADC_INTENCLR_CH3LIMITH_Msk (0x1UL << SAADC_INTENCLR_CH3LIMITH_Pos) /*!< Bit mask of CH3LIMITH field. */
+#define SAADC_INTENCLR_CH3LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH3LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH3LIMITH_Clear (1UL) /*!< Disable */
+
+/* Bit 11 : Write '1' to Disable interrupt for CH[2].LIMITL event */
+#define SAADC_INTENCLR_CH2LIMITL_Pos (11UL) /*!< Position of CH2LIMITL field. */
+#define SAADC_INTENCLR_CH2LIMITL_Msk (0x1UL << SAADC_INTENCLR_CH2LIMITL_Pos) /*!< Bit mask of CH2LIMITL field. */
+#define SAADC_INTENCLR_CH2LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH2LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH2LIMITL_Clear (1UL) /*!< Disable */
+
+/* Bit 10 : Write '1' to Disable interrupt for CH[2].LIMITH event */
+#define SAADC_INTENCLR_CH2LIMITH_Pos (10UL) /*!< Position of CH2LIMITH field. */
+#define SAADC_INTENCLR_CH2LIMITH_Msk (0x1UL << SAADC_INTENCLR_CH2LIMITH_Pos) /*!< Bit mask of CH2LIMITH field. */
+#define SAADC_INTENCLR_CH2LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH2LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH2LIMITH_Clear (1UL) /*!< Disable */
+
+/* Bit 9 : Write '1' to Disable interrupt for CH[1].LIMITL event */
+#define SAADC_INTENCLR_CH1LIMITL_Pos (9UL) /*!< Position of CH1LIMITL field. */
+#define SAADC_INTENCLR_CH1LIMITL_Msk (0x1UL << SAADC_INTENCLR_CH1LIMITL_Pos) /*!< Bit mask of CH1LIMITL field. */
+#define SAADC_INTENCLR_CH1LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH1LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH1LIMITL_Clear (1UL) /*!< Disable */
+
+/* Bit 8 : Write '1' to Disable interrupt for CH[1].LIMITH event */
+#define SAADC_INTENCLR_CH1LIMITH_Pos (8UL) /*!< Position of CH1LIMITH field. */
+#define SAADC_INTENCLR_CH1LIMITH_Msk (0x1UL << SAADC_INTENCLR_CH1LIMITH_Pos) /*!< Bit mask of CH1LIMITH field. */
+#define SAADC_INTENCLR_CH1LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH1LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH1LIMITH_Clear (1UL) /*!< Disable */
+
+/* Bit 7 : Write '1' to Disable interrupt for CH[0].LIMITL event */
+#define SAADC_INTENCLR_CH0LIMITL_Pos (7UL) /*!< Position of CH0LIMITL field. */
+#define SAADC_INTENCLR_CH0LIMITL_Msk (0x1UL << SAADC_INTENCLR_CH0LIMITL_Pos) /*!< Bit mask of CH0LIMITL field. */
+#define SAADC_INTENCLR_CH0LIMITL_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH0LIMITL_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH0LIMITL_Clear (1UL) /*!< Disable */
+
+/* Bit 6 : Write '1' to Disable interrupt for CH[0].LIMITH event */
+#define SAADC_INTENCLR_CH0LIMITH_Pos (6UL) /*!< Position of CH0LIMITH field. */
+#define SAADC_INTENCLR_CH0LIMITH_Msk (0x1UL << SAADC_INTENCLR_CH0LIMITH_Pos) /*!< Bit mask of CH0LIMITH field. */
+#define SAADC_INTENCLR_CH0LIMITH_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CH0LIMITH_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CH0LIMITH_Clear (1UL) /*!< Disable */
+
+/* Bit 5 : Write '1' to Disable interrupt for STOPPED event */
+#define SAADC_INTENCLR_STOPPED_Pos (5UL) /*!< Position of STOPPED field. */
+#define SAADC_INTENCLR_STOPPED_Msk (0x1UL << SAADC_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define SAADC_INTENCLR_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_STOPPED_Clear (1UL) /*!< Disable */
+
+/* Bit 4 : Write '1' to Disable interrupt for CALIBRATEDONE event */
+#define SAADC_INTENCLR_CALIBRATEDONE_Pos (4UL) /*!< Position of CALIBRATEDONE field. */
+#define SAADC_INTENCLR_CALIBRATEDONE_Msk (0x1UL << SAADC_INTENCLR_CALIBRATEDONE_Pos) /*!< Bit mask of CALIBRATEDONE field. */
+#define SAADC_INTENCLR_CALIBRATEDONE_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_CALIBRATEDONE_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_CALIBRATEDONE_Clear (1UL) /*!< Disable */
+
+/* Bit 3 : Write '1' to Disable interrupt for RESULTDONE event */
+#define SAADC_INTENCLR_RESULTDONE_Pos (3UL) /*!< Position of RESULTDONE field. */
+#define SAADC_INTENCLR_RESULTDONE_Msk (0x1UL << SAADC_INTENCLR_RESULTDONE_Pos) /*!< Bit mask of RESULTDONE field. */
+#define SAADC_INTENCLR_RESULTDONE_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_RESULTDONE_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_RESULTDONE_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for DONE event */
+#define SAADC_INTENCLR_DONE_Pos (2UL) /*!< Position of DONE field. */
+#define SAADC_INTENCLR_DONE_Msk (0x1UL << SAADC_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */
+#define SAADC_INTENCLR_DONE_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_DONE_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_DONE_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for END event */
+#define SAADC_INTENCLR_END_Pos (1UL) /*!< Position of END field. */
+#define SAADC_INTENCLR_END_Msk (0x1UL << SAADC_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define SAADC_INTENCLR_END_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_END_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_END_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for STARTED event */
+#define SAADC_INTENCLR_STARTED_Pos (0UL) /*!< Position of STARTED field. */
+#define SAADC_INTENCLR_STARTED_Msk (0x1UL << SAADC_INTENCLR_STARTED_Pos) /*!< Bit mask of STARTED field. */
+#define SAADC_INTENCLR_STARTED_Disabled (0UL) /*!< Read: Disabled */
+#define SAADC_INTENCLR_STARTED_Enabled (1UL) /*!< Read: Enabled */
+#define SAADC_INTENCLR_STARTED_Clear (1UL) /*!< Disable */
+
+/* Register: SAADC_STATUS */
+/* Description: Status */
+
+/* Bit 0 : Status */
+#define SAADC_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */
+#define SAADC_STATUS_STATUS_Msk (0x1UL << SAADC_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */
+#define SAADC_STATUS_STATUS_Ready (0UL) /*!< ADC is ready. No on-going conversion. */
+#define SAADC_STATUS_STATUS_Busy (1UL) /*!< ADC is busy. Conversion in progress. */
+
+/* Register: SAADC_ENABLE */
+/* Description: Enable or disable ADC */
+
+/* Bit 0 : Enable or disable ADC */
+#define SAADC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define SAADC_ENABLE_ENABLE_Msk (0x1UL << SAADC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define SAADC_ENABLE_ENABLE_Disabled (0UL) /*!< Disable ADC */
+#define SAADC_ENABLE_ENABLE_Enabled (1UL) /*!< Enable ADC */
+
+/* Register: SAADC_CH_PSELP */
+/* Description: Description cluster[0]: Input positive pin selection for CH[0] */
+
+/* Bits 4..0 : Analog positive input channel */
+#define SAADC_CH_PSELP_PSELP_Pos (0UL) /*!< Position of PSELP field. */
+#define SAADC_CH_PSELP_PSELP_Msk (0x1FUL << SAADC_CH_PSELP_PSELP_Pos) /*!< Bit mask of PSELP field. */
+#define SAADC_CH_PSELP_PSELP_NC (0UL) /*!< Not connected */
+#define SAADC_CH_PSELP_PSELP_AnalogInput0 (1UL) /*!< AIN0 */
+#define SAADC_CH_PSELP_PSELP_AnalogInput1 (2UL) /*!< AIN1 */
+#define SAADC_CH_PSELP_PSELP_AnalogInput2 (3UL) /*!< AIN2 */
+#define SAADC_CH_PSELP_PSELP_AnalogInput3 (4UL) /*!< AIN3 */
+#define SAADC_CH_PSELP_PSELP_AnalogInput4 (5UL) /*!< AIN4 */
+#define SAADC_CH_PSELP_PSELP_AnalogInput5 (6UL) /*!< AIN5 */
+#define SAADC_CH_PSELP_PSELP_AnalogInput6 (7UL) /*!< AIN6 */
+#define SAADC_CH_PSELP_PSELP_AnalogInput7 (8UL) /*!< AIN7 */
+#define SAADC_CH_PSELP_PSELP_VDD (9UL) /*!< VDD */
+
+/* Register: SAADC_CH_PSELN */
+/* Description: Description cluster[0]: Input negative pin selection for CH[0] */
+
+/* Bits 4..0 : Analog negative input, enables differential channel */
+#define SAADC_CH_PSELN_PSELN_Pos (0UL) /*!< Position of PSELN field. */
+#define SAADC_CH_PSELN_PSELN_Msk (0x1FUL << SAADC_CH_PSELN_PSELN_Pos) /*!< Bit mask of PSELN field. */
+#define SAADC_CH_PSELN_PSELN_NC (0UL) /*!< Not connected */
+#define SAADC_CH_PSELN_PSELN_AnalogInput0 (1UL) /*!< AIN0 */
+#define SAADC_CH_PSELN_PSELN_AnalogInput1 (2UL) /*!< AIN1 */
+#define SAADC_CH_PSELN_PSELN_AnalogInput2 (3UL) /*!< AIN2 */
+#define SAADC_CH_PSELN_PSELN_AnalogInput3 (4UL) /*!< AIN3 */
+#define SAADC_CH_PSELN_PSELN_AnalogInput4 (5UL) /*!< AIN4 */
+#define SAADC_CH_PSELN_PSELN_AnalogInput5 (6UL) /*!< AIN5 */
+#define SAADC_CH_PSELN_PSELN_AnalogInput6 (7UL) /*!< AIN6 */
+#define SAADC_CH_PSELN_PSELN_AnalogInput7 (8UL) /*!< AIN7 */
+#define SAADC_CH_PSELN_PSELN_VDD (9UL) /*!< VDD */
+
+/* Register: SAADC_CH_CONFIG */
+/* Description: Description cluster[0]: Input configuration for CH[0] */
+
+/* Bit 24 : Enable burst mode */
+#define SAADC_CH_CONFIG_BURST_Pos (24UL) /*!< Position of BURST field. */
+#define SAADC_CH_CONFIG_BURST_Msk (0x1UL << SAADC_CH_CONFIG_BURST_Pos) /*!< Bit mask of BURST field. */
+#define SAADC_CH_CONFIG_BURST_Disabled (0UL) /*!< Burst mode is disabled (normal operation) */
+#define SAADC_CH_CONFIG_BURST_Enabled (1UL) /*!< Burst mode is enabled. SAADC takes 2^OVERSAMPLE number of samples as fast as it can, and sends the average to Data RAM. */
+
+/* Bit 20 : Enable differential mode */
+#define SAADC_CH_CONFIG_MODE_Pos (20UL) /*!< Position of MODE field. */
+#define SAADC_CH_CONFIG_MODE_Msk (0x1UL << SAADC_CH_CONFIG_MODE_Pos) /*!< Bit mask of MODE field. */
+#define SAADC_CH_CONFIG_MODE_SE (0UL) /*!< Single ended, PSELN will be ignored, negative input to ADC shorted to GND */
+#define SAADC_CH_CONFIG_MODE_Diff (1UL) /*!< Differential */
+
+/* Bits 18..16 : Acquisition time, the time the ADC uses to sample the input voltage */
+#define SAADC_CH_CONFIG_TACQ_Pos (16UL) /*!< Position of TACQ field. */
+#define SAADC_CH_CONFIG_TACQ_Msk (0x7UL << SAADC_CH_CONFIG_TACQ_Pos) /*!< Bit mask of TACQ field. */
+#define SAADC_CH_CONFIG_TACQ_3us (0UL) /*!< 3 us */
+#define SAADC_CH_CONFIG_TACQ_5us (1UL) /*!< 5 us */
+#define SAADC_CH_CONFIG_TACQ_10us (2UL) /*!< 10 us */
+#define SAADC_CH_CONFIG_TACQ_15us (3UL) /*!< 15 us */
+#define SAADC_CH_CONFIG_TACQ_20us (4UL) /*!< 20 us */
+#define SAADC_CH_CONFIG_TACQ_40us (5UL) /*!< 40 us */
+
+/* Bit 12 : Reference control */
+#define SAADC_CH_CONFIG_REFSEL_Pos (12UL) /*!< Position of REFSEL field. */
+#define SAADC_CH_CONFIG_REFSEL_Msk (0x1UL << SAADC_CH_CONFIG_REFSEL_Pos) /*!< Bit mask of REFSEL field. */
+#define SAADC_CH_CONFIG_REFSEL_Internal (0UL) /*!< Internal reference (0.6 V) */
+#define SAADC_CH_CONFIG_REFSEL_VDD1_4 (1UL) /*!< VDD/4 as reference */
+
+/* Bits 10..8 : Gain control */
+#define SAADC_CH_CONFIG_GAIN_Pos (8UL) /*!< Position of GAIN field. */
+#define SAADC_CH_CONFIG_GAIN_Msk (0x7UL << SAADC_CH_CONFIG_GAIN_Pos) /*!< Bit mask of GAIN field. */
+#define SAADC_CH_CONFIG_GAIN_Gain1_6 (0UL) /*!< 1/6 */
+#define SAADC_CH_CONFIG_GAIN_Gain1_5 (1UL) /*!< 1/5 */
+#define SAADC_CH_CONFIG_GAIN_Gain1_4 (2UL) /*!< 1/4 */
+#define SAADC_CH_CONFIG_GAIN_Gain1_3 (3UL) /*!< 1/3 */
+#define SAADC_CH_CONFIG_GAIN_Gain1_2 (4UL) /*!< 1/2 */
+#define SAADC_CH_CONFIG_GAIN_Gain1 (5UL) /*!< 1 */
+#define SAADC_CH_CONFIG_GAIN_Gain2 (6UL) /*!< 2 */
+#define SAADC_CH_CONFIG_GAIN_Gain4 (7UL) /*!< 4 */
+
+/* Bits 5..4 : Negative channel resistor control */
+#define SAADC_CH_CONFIG_RESN_Pos (4UL) /*!< Position of RESN field. */
+#define SAADC_CH_CONFIG_RESN_Msk (0x3UL << SAADC_CH_CONFIG_RESN_Pos) /*!< Bit mask of RESN field. */
+#define SAADC_CH_CONFIG_RESN_Bypass (0UL) /*!< Bypass resistor ladder */
+#define SAADC_CH_CONFIG_RESN_Pulldown (1UL) /*!< Pull-down to GND */
+#define SAADC_CH_CONFIG_RESN_Pullup (2UL) /*!< Pull-up to VDD */
+#define SAADC_CH_CONFIG_RESN_VDD1_2 (3UL) /*!< Set input at VDD/2 */
+
+/* Bits 1..0 : Positive channel resistor control */
+#define SAADC_CH_CONFIG_RESP_Pos (0UL) /*!< Position of RESP field. */
+#define SAADC_CH_CONFIG_RESP_Msk (0x3UL << SAADC_CH_CONFIG_RESP_Pos) /*!< Bit mask of RESP field. */
+#define SAADC_CH_CONFIG_RESP_Bypass (0UL) /*!< Bypass resistor ladder */
+#define SAADC_CH_CONFIG_RESP_Pulldown (1UL) /*!< Pull-down to GND */
+#define SAADC_CH_CONFIG_RESP_Pullup (2UL) /*!< Pull-up to VDD */
+#define SAADC_CH_CONFIG_RESP_VDD1_2 (3UL) /*!< Set input at VDD/2 */
+
+/* Register: SAADC_CH_LIMIT */
+/* Description: Description cluster[0]: High/low limits for event monitoring a channel */
+
+/* Bits 31..16 : High level limit */
+#define SAADC_CH_LIMIT_HIGH_Pos (16UL) /*!< Position of HIGH field. */
+#define SAADC_CH_LIMIT_HIGH_Msk (0xFFFFUL << SAADC_CH_LIMIT_HIGH_Pos) /*!< Bit mask of HIGH field. */
+
+/* Bits 15..0 : Low level limit */
+#define SAADC_CH_LIMIT_LOW_Pos (0UL) /*!< Position of LOW field. */
+#define SAADC_CH_LIMIT_LOW_Msk (0xFFFFUL << SAADC_CH_LIMIT_LOW_Pos) /*!< Bit mask of LOW field. */
+
+/* Register: SAADC_RESOLUTION */
+/* Description: Resolution configuration */
+
+/* Bits 2..0 : Set the resolution */
+#define SAADC_RESOLUTION_VAL_Pos (0UL) /*!< Position of VAL field. */
+#define SAADC_RESOLUTION_VAL_Msk (0x7UL << SAADC_RESOLUTION_VAL_Pos) /*!< Bit mask of VAL field. */
+#define SAADC_RESOLUTION_VAL_8bit (0UL) /*!< 8 bit */
+#define SAADC_RESOLUTION_VAL_10bit (1UL) /*!< 10 bit */
+#define SAADC_RESOLUTION_VAL_12bit (2UL) /*!< 12 bit */
+#define SAADC_RESOLUTION_VAL_14bit (3UL) /*!< 14 bit */
+
+/* Register: SAADC_OVERSAMPLE */
+/* Description: Oversampling configuration. OVERSAMPLE should not be combined with SCAN. The RESOLUTION is applied before averaging, thus for high OVERSAMPLE a higher RESOLUTION should be used. */
+
+/* Bits 3..0 : Oversample control */
+#define SAADC_OVERSAMPLE_OVERSAMPLE_Pos (0UL) /*!< Position of OVERSAMPLE field. */
+#define SAADC_OVERSAMPLE_OVERSAMPLE_Msk (0xFUL << SAADC_OVERSAMPLE_OVERSAMPLE_Pos) /*!< Bit mask of OVERSAMPLE field. */
+#define SAADC_OVERSAMPLE_OVERSAMPLE_Bypass (0UL) /*!< Bypass oversampling */
+#define SAADC_OVERSAMPLE_OVERSAMPLE_Over2x (1UL) /*!< Oversample 2x */
+#define SAADC_OVERSAMPLE_OVERSAMPLE_Over4x (2UL) /*!< Oversample 4x */
+#define SAADC_OVERSAMPLE_OVERSAMPLE_Over8x (3UL) /*!< Oversample 8x */
+#define SAADC_OVERSAMPLE_OVERSAMPLE_Over16x (4UL) /*!< Oversample 16x */
+#define SAADC_OVERSAMPLE_OVERSAMPLE_Over32x (5UL) /*!< Oversample 32x */
+#define SAADC_OVERSAMPLE_OVERSAMPLE_Over64x (6UL) /*!< Oversample 64x */
+#define SAADC_OVERSAMPLE_OVERSAMPLE_Over128x (7UL) /*!< Oversample 128x */
+#define SAADC_OVERSAMPLE_OVERSAMPLE_Over256x (8UL) /*!< Oversample 256x */
+
+/* Register: SAADC_SAMPLERATE */
+/* Description: Controls normal or continuous sample rate */
+
+/* Bit 12 : Select mode for sample rate control */
+#define SAADC_SAMPLERATE_MODE_Pos (12UL) /*!< Position of MODE field. */
+#define SAADC_SAMPLERATE_MODE_Msk (0x1UL << SAADC_SAMPLERATE_MODE_Pos) /*!< Bit mask of MODE field. */
+#define SAADC_SAMPLERATE_MODE_Task (0UL) /*!< Rate is controlled from SAMPLE task */
+#define SAADC_SAMPLERATE_MODE_Timers (1UL) /*!< Rate is controlled from local timer (use CC to control the rate) */
+
+/* Bits 10..0 : Capture and compare value. Sample rate is 16 MHz/CC */
+#define SAADC_SAMPLERATE_CC_Pos (0UL) /*!< Position of CC field. */
+#define SAADC_SAMPLERATE_CC_Msk (0x7FFUL << SAADC_SAMPLERATE_CC_Pos) /*!< Bit mask of CC field. */
+
+/* Register: SAADC_RESULT_PTR */
+/* Description: Data pointer */
+
+/* Bits 31..0 : Data pointer */
+#define SAADC_RESULT_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define SAADC_RESULT_PTR_PTR_Msk (0xFFFFFFFFUL << SAADC_RESULT_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: SAADC_RESULT_MAXCNT */
+/* Description: Maximum number of buffer words to transfer */
+
+/* Bits 14..0 : Maximum number of buffer words to transfer */
+#define SAADC_RESULT_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define SAADC_RESULT_MAXCNT_MAXCNT_Msk (0x7FFFUL << SAADC_RESULT_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: SAADC_RESULT_AMOUNT */
+/* Description: Number of buffer words transferred since last START */
+
+/* Bits 14..0 : Number of buffer words transferred since last START. This register can be read after an END or STOPPED event. */
+#define SAADC_RESULT_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
+#define SAADC_RESULT_AMOUNT_AMOUNT_Msk (0x7FFFUL << SAADC_RESULT_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
+
+
+/* Peripheral: SPI */
+/* Description: Serial Peripheral Interface 0 */
+
+/* Register: SPI_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 2 : Write '1' to Enable interrupt for READY event */
+#define SPI_INTENSET_READY_Pos (2UL) /*!< Position of READY field. */
+#define SPI_INTENSET_READY_Msk (0x1UL << SPI_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
+#define SPI_INTENSET_READY_Disabled (0UL) /*!< Read: Disabled */
+#define SPI_INTENSET_READY_Enabled (1UL) /*!< Read: Enabled */
+#define SPI_INTENSET_READY_Set (1UL) /*!< Enable */
+
+/* Register: SPI_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 2 : Write '1' to Disable interrupt for READY event */
+#define SPI_INTENCLR_READY_Pos (2UL) /*!< Position of READY field. */
+#define SPI_INTENCLR_READY_Msk (0x1UL << SPI_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
+#define SPI_INTENCLR_READY_Disabled (0UL) /*!< Read: Disabled */
+#define SPI_INTENCLR_READY_Enabled (1UL) /*!< Read: Enabled */
+#define SPI_INTENCLR_READY_Clear (1UL) /*!< Disable */
+
+/* Register: SPI_ENABLE */
+/* Description: Enable SPI */
+
+/* Bits 3..0 : Enable or disable SPI */
+#define SPI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define SPI_ENABLE_ENABLE_Msk (0xFUL << SPI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define SPI_ENABLE_ENABLE_Disabled (0UL) /*!< Disable SPI */
+#define SPI_ENABLE_ENABLE_Enabled (1UL) /*!< Enable SPI */
+
+/* Register: SPI_PSEL_SCK */
+/* Description: Pin select for SCK */
+
+/* Bits 31..0 : Pin number configuration for SPI SCK signal */
+#define SPI_PSEL_SCK_PSELSCK_Pos (0UL) /*!< Position of PSELSCK field. */
+#define SPI_PSEL_SCK_PSELSCK_Msk (0xFFFFFFFFUL << SPI_PSEL_SCK_PSELSCK_Pos) /*!< Bit mask of PSELSCK field. */
+#define SPI_PSEL_SCK_PSELSCK_Disconnected (0xFFFFFFFFUL) /*!< Disconnect */
+
+/* Register: SPI_PSEL_MOSI */
+/* Description: Pin select for MOSI */
+
+/* Bits 31..0 : Pin number configuration for SPI MOSI signal */
+#define SPI_PSEL_MOSI_PSELMOSI_Pos (0UL) /*!< Position of PSELMOSI field. */
+#define SPI_PSEL_MOSI_PSELMOSI_Msk (0xFFFFFFFFUL << SPI_PSEL_MOSI_PSELMOSI_Pos) /*!< Bit mask of PSELMOSI field. */
+#define SPI_PSEL_MOSI_PSELMOSI_Disconnected (0xFFFFFFFFUL) /*!< Disconnect */
+
+/* Register: SPI_PSEL_MISO */
+/* Description: Pin select for MISO */
+
+/* Bits 31..0 : Pin number configuration for SPI MISO signal */
+#define SPI_PSEL_MISO_PSELMISO_Pos (0UL) /*!< Position of PSELMISO field. */
+#define SPI_PSEL_MISO_PSELMISO_Msk (0xFFFFFFFFUL << SPI_PSEL_MISO_PSELMISO_Pos) /*!< Bit mask of PSELMISO field. */
+#define SPI_PSEL_MISO_PSELMISO_Disconnected (0xFFFFFFFFUL) /*!< Disconnect */
+
+/* Register: SPI_RXD */
+/* Description: RXD register */
+
+/* Bits 7..0 : RX data received. Double buffered */
+#define SPI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */
+#define SPI_RXD_RXD_Msk (0xFFUL << SPI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */
+
+/* Register: SPI_TXD */
+/* Description: TXD register */
+
+/* Bits 7..0 : TX data to send. Double buffered */
+#define SPI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */
+#define SPI_TXD_TXD_Msk (0xFFUL << SPI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */
+
+/* Register: SPI_FREQUENCY */
+/* Description: SPI frequency */
+
+/* Bits 31..0 : SPI master data rate */
+#define SPI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
+#define SPI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
+#define SPI_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125 kbps */
+#define SPI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps */
+#define SPI_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500 kbps */
+#define SPI_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1 Mbps */
+#define SPI_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2 Mbps */
+#define SPI_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4 Mbps */
+#define SPI_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8 Mbps */
+
+/* Register: SPI_CONFIG */
+/* Description: Configuration register */
+
+/* Bit 2 : Serial clock (SCK) polarity */
+#define SPI_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */
+#define SPI_CONFIG_CPOL_Msk (0x1UL << SPI_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */
+#define SPI_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high */
+#define SPI_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low */
+
+/* Bit 1 : Serial clock (SCK) phase */
+#define SPI_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */
+#define SPI_CONFIG_CPHA_Msk (0x1UL << SPI_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */
+#define SPI_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of clock, shift serial data on trailing edge */
+#define SPI_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of clock, shift serial data on leading edge */
+
+/* Bit 0 : Bit order */
+#define SPI_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */
+#define SPI_CONFIG_ORDER_Msk (0x1UL << SPI_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */
+#define SPI_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit shifted out first */
+#define SPI_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit shifted out first */
+
+
+/* Peripheral: SPIM */
+/* Description: Serial Peripheral Interface Master with EasyDMA 0 */
+
+/* Register: SPIM_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 17 : Shortcut between END event and START task */
+#define SPIM_SHORTS_END_START_Pos (17UL) /*!< Position of END_START field. */
+#define SPIM_SHORTS_END_START_Msk (0x1UL << SPIM_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */
+#define SPIM_SHORTS_END_START_Disabled (0UL) /*!< Disable shortcut */
+#define SPIM_SHORTS_END_START_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: SPIM_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 19 : Write '1' to Enable interrupt for STARTED event */
+#define SPIM_INTENSET_STARTED_Pos (19UL) /*!< Position of STARTED field. */
+#define SPIM_INTENSET_STARTED_Msk (0x1UL << SPIM_INTENSET_STARTED_Pos) /*!< Bit mask of STARTED field. */
+#define SPIM_INTENSET_STARTED_Disabled (0UL) /*!< Read: Disabled */
+#define SPIM_INTENSET_STARTED_Enabled (1UL) /*!< Read: Enabled */
+#define SPIM_INTENSET_STARTED_Set (1UL) /*!< Enable */
+
+/* Bit 8 : Write '1' to Enable interrupt for ENDTX event */
+#define SPIM_INTENSET_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */
+#define SPIM_INTENSET_ENDTX_Msk (0x1UL << SPIM_INTENSET_ENDTX_Pos) /*!< Bit mask of ENDTX field. */
+#define SPIM_INTENSET_ENDTX_Disabled (0UL) /*!< Read: Disabled */
+#define SPIM_INTENSET_ENDTX_Enabled (1UL) /*!< Read: Enabled */
+#define SPIM_INTENSET_ENDTX_Set (1UL) /*!< Enable */
+
+/* Bit 6 : Write '1' to Enable interrupt for END event */
+#define SPIM_INTENSET_END_Pos (6UL) /*!< Position of END field. */
+#define SPIM_INTENSET_END_Msk (0x1UL << SPIM_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define SPIM_INTENSET_END_Disabled (0UL) /*!< Read: Disabled */
+#define SPIM_INTENSET_END_Enabled (1UL) /*!< Read: Enabled */
+#define SPIM_INTENSET_END_Set (1UL) /*!< Enable */
+
+/* Bit 4 : Write '1' to Enable interrupt for ENDRX event */
+#define SPIM_INTENSET_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
+#define SPIM_INTENSET_ENDRX_Msk (0x1UL << SPIM_INTENSET_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define SPIM_INTENSET_ENDRX_Disabled (0UL) /*!< Read: Disabled */
+#define SPIM_INTENSET_ENDRX_Enabled (1UL) /*!< Read: Enabled */
+#define SPIM_INTENSET_ENDRX_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for STOPPED event */
+#define SPIM_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define SPIM_INTENSET_STOPPED_Msk (0x1UL << SPIM_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define SPIM_INTENSET_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define SPIM_INTENSET_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define SPIM_INTENSET_STOPPED_Set (1UL) /*!< Enable */
+
+/* Register: SPIM_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 19 : Write '1' to Disable interrupt for STARTED event */
+#define SPIM_INTENCLR_STARTED_Pos (19UL) /*!< Position of STARTED field. */
+#define SPIM_INTENCLR_STARTED_Msk (0x1UL << SPIM_INTENCLR_STARTED_Pos) /*!< Bit mask of STARTED field. */
+#define SPIM_INTENCLR_STARTED_Disabled (0UL) /*!< Read: Disabled */
+#define SPIM_INTENCLR_STARTED_Enabled (1UL) /*!< Read: Enabled */
+#define SPIM_INTENCLR_STARTED_Clear (1UL) /*!< Disable */
+
+/* Bit 8 : Write '1' to Disable interrupt for ENDTX event */
+#define SPIM_INTENCLR_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */
+#define SPIM_INTENCLR_ENDTX_Msk (0x1UL << SPIM_INTENCLR_ENDTX_Pos) /*!< Bit mask of ENDTX field. */
+#define SPIM_INTENCLR_ENDTX_Disabled (0UL) /*!< Read: Disabled */
+#define SPIM_INTENCLR_ENDTX_Enabled (1UL) /*!< Read: Enabled */
+#define SPIM_INTENCLR_ENDTX_Clear (1UL) /*!< Disable */
+
+/* Bit 6 : Write '1' to Disable interrupt for END event */
+#define SPIM_INTENCLR_END_Pos (6UL) /*!< Position of END field. */
+#define SPIM_INTENCLR_END_Msk (0x1UL << SPIM_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define SPIM_INTENCLR_END_Disabled (0UL) /*!< Read: Disabled */
+#define SPIM_INTENCLR_END_Enabled (1UL) /*!< Read: Enabled */
+#define SPIM_INTENCLR_END_Clear (1UL) /*!< Disable */
+
+/* Bit 4 : Write '1' to Disable interrupt for ENDRX event */
+#define SPIM_INTENCLR_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
+#define SPIM_INTENCLR_ENDRX_Msk (0x1UL << SPIM_INTENCLR_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define SPIM_INTENCLR_ENDRX_Disabled (0UL) /*!< Read: Disabled */
+#define SPIM_INTENCLR_ENDRX_Enabled (1UL) /*!< Read: Enabled */
+#define SPIM_INTENCLR_ENDRX_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for STOPPED event */
+#define SPIM_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define SPIM_INTENCLR_STOPPED_Msk (0x1UL << SPIM_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define SPIM_INTENCLR_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define SPIM_INTENCLR_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define SPIM_INTENCLR_STOPPED_Clear (1UL) /*!< Disable */
+
+/* Register: SPIM_ENABLE */
+/* Description: Enable SPIM */
+
+/* Bits 3..0 : Enable or disable SPIM */
+#define SPIM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define SPIM_ENABLE_ENABLE_Msk (0xFUL << SPIM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define SPIM_ENABLE_ENABLE_Disabled (0UL) /*!< Disable SPIM */
+#define SPIM_ENABLE_ENABLE_Enabled (7UL) /*!< Enable SPIM */
+
+/* Register: SPIM_PSEL_SCK */
+/* Description: Pin select for SCK */
+
+/* Bit 31 : Connection */
+#define SPIM_PSEL_SCK_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define SPIM_PSEL_SCK_CONNECT_Msk (0x1UL << SPIM_PSEL_SCK_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define SPIM_PSEL_SCK_CONNECT_Connected (0UL) /*!< Connect */
+#define SPIM_PSEL_SCK_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define SPIM_PSEL_SCK_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define SPIM_PSEL_SCK_PIN_Msk (0x1FUL << SPIM_PSEL_SCK_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: SPIM_PSEL_MOSI */
+/* Description: Pin select for MOSI signal */
+
+/* Bit 31 : Connection */
+#define SPIM_PSEL_MOSI_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define SPIM_PSEL_MOSI_CONNECT_Msk (0x1UL << SPIM_PSEL_MOSI_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define SPIM_PSEL_MOSI_CONNECT_Connected (0UL) /*!< Connect */
+#define SPIM_PSEL_MOSI_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define SPIM_PSEL_MOSI_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define SPIM_PSEL_MOSI_PIN_Msk (0x1FUL << SPIM_PSEL_MOSI_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: SPIM_PSEL_MISO */
+/* Description: Pin select for MISO signal */
+
+/* Bit 31 : Connection */
+#define SPIM_PSEL_MISO_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define SPIM_PSEL_MISO_CONNECT_Msk (0x1UL << SPIM_PSEL_MISO_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define SPIM_PSEL_MISO_CONNECT_Connected (0UL) /*!< Connect */
+#define SPIM_PSEL_MISO_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define SPIM_PSEL_MISO_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define SPIM_PSEL_MISO_PIN_Msk (0x1FUL << SPIM_PSEL_MISO_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: SPIM_FREQUENCY */
+/* Description: SPI frequency */
+
+/* Bits 31..0 : SPI master data rate */
+#define SPIM_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
+#define SPIM_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPIM_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
+#define SPIM_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125 kbps */
+#define SPIM_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps */
+#define SPIM_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500 kbps */
+#define SPIM_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1 Mbps */
+#define SPIM_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2 Mbps */
+#define SPIM_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4 Mbps */
+#define SPIM_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8 Mbps */
+
+/* Register: SPIM_RXD_PTR */
+/* Description: Data pointer */
+
+/* Bits 31..0 : Data pointer */
+#define SPIM_RXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define SPIM_RXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_RXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: SPIM_RXD_MAXCNT */
+/* Description: Maximum number of bytes in receive buffer */
+
+/* Bits 7..0 : Maximum number of bytes in receive buffer */
+#define SPIM_RXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define SPIM_RXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_RXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: SPIM_RXD_AMOUNT */
+/* Description: Number of bytes transferred in the last transaction */
+
+/* Bits 7..0 : Number of bytes transferred in the last transaction */
+#define SPIM_RXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
+#define SPIM_RXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_RXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
+
+/* Register: SPIM_RXD_LIST */
+/* Description: EasyDMA list type */
+
+/* Bits 2..0 : List type */
+#define SPIM_RXD_LIST_LIST_Pos (0UL) /*!< Position of LIST field. */
+#define SPIM_RXD_LIST_LIST_Msk (0x7UL << SPIM_RXD_LIST_LIST_Pos) /*!< Bit mask of LIST field. */
+#define SPIM_RXD_LIST_LIST_Disabled (0UL) /*!< Disable EasyDMA list */
+#define SPIM_RXD_LIST_LIST_ArrayList (1UL) /*!< Use array list */
+
+/* Register: SPIM_TXD_PTR */
+/* Description: Data pointer */
+
+/* Bits 31..0 : Data pointer */
+#define SPIM_TXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define SPIM_TXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_TXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: SPIM_TXD_MAXCNT */
+/* Description: Maximum number of bytes in transmit buffer */
+
+/* Bits 7..0 : Maximum number of bytes in transmit buffer */
+#define SPIM_TXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define SPIM_TXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_TXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: SPIM_TXD_AMOUNT */
+/* Description: Number of bytes transferred in the last transaction */
+
+/* Bits 7..0 : Number of bytes transferred in the last transaction */
+#define SPIM_TXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
+#define SPIM_TXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_TXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
+
+/* Register: SPIM_TXD_LIST */
+/* Description: EasyDMA list type */
+
+/* Bits 2..0 : List type */
+#define SPIM_TXD_LIST_LIST_Pos (0UL) /*!< Position of LIST field. */
+#define SPIM_TXD_LIST_LIST_Msk (0x7UL << SPIM_TXD_LIST_LIST_Pos) /*!< Bit mask of LIST field. */
+#define SPIM_TXD_LIST_LIST_Disabled (0UL) /*!< Disable EasyDMA list */
+#define SPIM_TXD_LIST_LIST_ArrayList (1UL) /*!< Use array list */
+
+/* Register: SPIM_CONFIG */
+/* Description: Configuration register */
+
+/* Bit 2 : Serial clock (SCK) polarity */
+#define SPIM_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */
+#define SPIM_CONFIG_CPOL_Msk (0x1UL << SPIM_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */
+#define SPIM_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high */
+#define SPIM_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low */
+
+/* Bit 1 : Serial clock (SCK) phase */
+#define SPIM_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */
+#define SPIM_CONFIG_CPHA_Msk (0x1UL << SPIM_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */
+#define SPIM_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of clock, shift serial data on trailing edge */
+#define SPIM_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of clock, shift serial data on leading edge */
+
+/* Bit 0 : Bit order */
+#define SPIM_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */
+#define SPIM_CONFIG_ORDER_Msk (0x1UL << SPIM_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */
+#define SPIM_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit shifted out first */
+#define SPIM_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit shifted out first */
+
+/* Register: SPIM_ORC */
+/* Description: Over-read character. Character clocked out in case and over-read of the TXD buffer. */
+
+/* Bits 7..0 : Over-read character. Character clocked out in case and over-read of the TXD buffer. */
+#define SPIM_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */
+#define SPIM_ORC_ORC_Msk (0xFFUL << SPIM_ORC_ORC_Pos) /*!< Bit mask of ORC field. */
+
+
+/* Peripheral: SPIS */
+/* Description: SPI Slave 0 */
+
+/* Register: SPIS_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 2 : Shortcut between END event and ACQUIRE task */
+#define SPIS_SHORTS_END_ACQUIRE_Pos (2UL) /*!< Position of END_ACQUIRE field. */
+#define SPIS_SHORTS_END_ACQUIRE_Msk (0x1UL << SPIS_SHORTS_END_ACQUIRE_Pos) /*!< Bit mask of END_ACQUIRE field. */
+#define SPIS_SHORTS_END_ACQUIRE_Disabled (0UL) /*!< Disable shortcut */
+#define SPIS_SHORTS_END_ACQUIRE_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: SPIS_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 10 : Write '1' to Enable interrupt for ACQUIRED event */
+#define SPIS_INTENSET_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */
+#define SPIS_INTENSET_ACQUIRED_Msk (0x1UL << SPIS_INTENSET_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */
+#define SPIS_INTENSET_ACQUIRED_Disabled (0UL) /*!< Read: Disabled */
+#define SPIS_INTENSET_ACQUIRED_Enabled (1UL) /*!< Read: Enabled */
+#define SPIS_INTENSET_ACQUIRED_Set (1UL) /*!< Enable */
+
+/* Bit 4 : Write '1' to Enable interrupt for ENDRX event */
+#define SPIS_INTENSET_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
+#define SPIS_INTENSET_ENDRX_Msk (0x1UL << SPIS_INTENSET_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define SPIS_INTENSET_ENDRX_Disabled (0UL) /*!< Read: Disabled */
+#define SPIS_INTENSET_ENDRX_Enabled (1UL) /*!< Read: Enabled */
+#define SPIS_INTENSET_ENDRX_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for END event */
+#define SPIS_INTENSET_END_Pos (1UL) /*!< Position of END field. */
+#define SPIS_INTENSET_END_Msk (0x1UL << SPIS_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define SPIS_INTENSET_END_Disabled (0UL) /*!< Read: Disabled */
+#define SPIS_INTENSET_END_Enabled (1UL) /*!< Read: Enabled */
+#define SPIS_INTENSET_END_Set (1UL) /*!< Enable */
+
+/* Register: SPIS_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 10 : Write '1' to Disable interrupt for ACQUIRED event */
+#define SPIS_INTENCLR_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */
+#define SPIS_INTENCLR_ACQUIRED_Msk (0x1UL << SPIS_INTENCLR_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */
+#define SPIS_INTENCLR_ACQUIRED_Disabled (0UL) /*!< Read: Disabled */
+#define SPIS_INTENCLR_ACQUIRED_Enabled (1UL) /*!< Read: Enabled */
+#define SPIS_INTENCLR_ACQUIRED_Clear (1UL) /*!< Disable */
+
+/* Bit 4 : Write '1' to Disable interrupt for ENDRX event */
+#define SPIS_INTENCLR_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
+#define SPIS_INTENCLR_ENDRX_Msk (0x1UL << SPIS_INTENCLR_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define SPIS_INTENCLR_ENDRX_Disabled (0UL) /*!< Read: Disabled */
+#define SPIS_INTENCLR_ENDRX_Enabled (1UL) /*!< Read: Enabled */
+#define SPIS_INTENCLR_ENDRX_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for END event */
+#define SPIS_INTENCLR_END_Pos (1UL) /*!< Position of END field. */
+#define SPIS_INTENCLR_END_Msk (0x1UL << SPIS_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define SPIS_INTENCLR_END_Disabled (0UL) /*!< Read: Disabled */
+#define SPIS_INTENCLR_END_Enabled (1UL) /*!< Read: Enabled */
+#define SPIS_INTENCLR_END_Clear (1UL) /*!< Disable */
+
+/* Register: SPIS_SEMSTAT */
+/* Description: Semaphore status register */
+
+/* Bits 1..0 : Semaphore status */
+#define SPIS_SEMSTAT_SEMSTAT_Pos (0UL) /*!< Position of SEMSTAT field. */
+#define SPIS_SEMSTAT_SEMSTAT_Msk (0x3UL << SPIS_SEMSTAT_SEMSTAT_Pos) /*!< Bit mask of SEMSTAT field. */
+#define SPIS_SEMSTAT_SEMSTAT_Free (0UL) /*!< Semaphore is free */
+#define SPIS_SEMSTAT_SEMSTAT_CPU (1UL) /*!< Semaphore is assigned to CPU */
+#define SPIS_SEMSTAT_SEMSTAT_SPIS (2UL) /*!< Semaphore is assigned to SPI slave */
+#define SPIS_SEMSTAT_SEMSTAT_CPUPending (3UL) /*!< Semaphore is assigned to SPI but a handover to the CPU is pending */
+
+/* Register: SPIS_STATUS */
+/* Description: Status from last transaction */
+
+/* Bit 1 : RX buffer overflow detected, and prevented */
+#define SPIS_STATUS_OVERFLOW_Pos (1UL) /*!< Position of OVERFLOW field. */
+#define SPIS_STATUS_OVERFLOW_Msk (0x1UL << SPIS_STATUS_OVERFLOW_Pos) /*!< Bit mask of OVERFLOW field. */
+#define SPIS_STATUS_OVERFLOW_NotPresent (0UL) /*!< Read: error not present */
+#define SPIS_STATUS_OVERFLOW_Present (1UL) /*!< Read: error present */
+#define SPIS_STATUS_OVERFLOW_Clear (1UL) /*!< Write: clear error on writing '1' */
+
+/* Bit 0 : TX buffer over-read detected, and prevented */
+#define SPIS_STATUS_OVERREAD_Pos (0UL) /*!< Position of OVERREAD field. */
+#define SPIS_STATUS_OVERREAD_Msk (0x1UL << SPIS_STATUS_OVERREAD_Pos) /*!< Bit mask of OVERREAD field. */
+#define SPIS_STATUS_OVERREAD_NotPresent (0UL) /*!< Read: error not present */
+#define SPIS_STATUS_OVERREAD_Present (1UL) /*!< Read: error present */
+#define SPIS_STATUS_OVERREAD_Clear (1UL) /*!< Write: clear error on writing '1' */
+
+/* Register: SPIS_ENABLE */
+/* Description: Enable SPI slave */
+
+/* Bits 3..0 : Enable or disable SPI slave */
+#define SPIS_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define SPIS_ENABLE_ENABLE_Msk (0xFUL << SPIS_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define SPIS_ENABLE_ENABLE_Disabled (0UL) /*!< Disable SPI slave */
+#define SPIS_ENABLE_ENABLE_Enabled (2UL) /*!< Enable SPI slave */
+
+/* Register: SPIS_PSEL_SCK */
+/* Description: Pin select for SCK */
+
+/* Bit 31 : Connection */
+#define SPIS_PSEL_SCK_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define SPIS_PSEL_SCK_CONNECT_Msk (0x1UL << SPIS_PSEL_SCK_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define SPIS_PSEL_SCK_CONNECT_Connected (0UL) /*!< Connect */
+#define SPIS_PSEL_SCK_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define SPIS_PSEL_SCK_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define SPIS_PSEL_SCK_PIN_Msk (0x1FUL << SPIS_PSEL_SCK_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: SPIS_PSEL_MISO */
+/* Description: Pin select for MISO signal */
+
+/* Bit 31 : Connection */
+#define SPIS_PSEL_MISO_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define SPIS_PSEL_MISO_CONNECT_Msk (0x1UL << SPIS_PSEL_MISO_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define SPIS_PSEL_MISO_CONNECT_Connected (0UL) /*!< Connect */
+#define SPIS_PSEL_MISO_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define SPIS_PSEL_MISO_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define SPIS_PSEL_MISO_PIN_Msk (0x1FUL << SPIS_PSEL_MISO_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: SPIS_PSEL_MOSI */
+/* Description: Pin select for MOSI signal */
+
+/* Bit 31 : Connection */
+#define SPIS_PSEL_MOSI_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define SPIS_PSEL_MOSI_CONNECT_Msk (0x1UL << SPIS_PSEL_MOSI_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define SPIS_PSEL_MOSI_CONNECT_Connected (0UL) /*!< Connect */
+#define SPIS_PSEL_MOSI_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define SPIS_PSEL_MOSI_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define SPIS_PSEL_MOSI_PIN_Msk (0x1FUL << SPIS_PSEL_MOSI_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: SPIS_PSEL_CSN */
+/* Description: Pin select for CSN signal */
+
+/* Bit 31 : Connection */
+#define SPIS_PSEL_CSN_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define SPIS_PSEL_CSN_CONNECT_Msk (0x1UL << SPIS_PSEL_CSN_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define SPIS_PSEL_CSN_CONNECT_Connected (0UL) /*!< Connect */
+#define SPIS_PSEL_CSN_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define SPIS_PSEL_CSN_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define SPIS_PSEL_CSN_PIN_Msk (0x1FUL << SPIS_PSEL_CSN_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: SPIS_RXD_PTR */
+/* Description: RXD data pointer */
+
+/* Bits 31..0 : RXD data pointer */
+#define SPIS_RXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define SPIS_RXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIS_RXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: SPIS_RXD_MAXCNT */
+/* Description: Maximum number of bytes in receive buffer */
+
+/* Bits 7..0 : Maximum number of bytes in receive buffer */
+#define SPIS_RXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define SPIS_RXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIS_RXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: SPIS_RXD_AMOUNT */
+/* Description: Number of bytes received in last granted transaction */
+
+/* Bits 7..0 : Number of bytes received in the last granted transaction */
+#define SPIS_RXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
+#define SPIS_RXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIS_RXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
+
+/* Register: SPIS_TXD_PTR */
+/* Description: TXD data pointer */
+
+/* Bits 31..0 : TXD data pointer */
+#define SPIS_TXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define SPIS_TXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIS_TXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: SPIS_TXD_MAXCNT */
+/* Description: Maximum number of bytes in transmit buffer */
+
+/* Bits 7..0 : Maximum number of bytes in transmit buffer */
+#define SPIS_TXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define SPIS_TXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIS_TXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: SPIS_TXD_AMOUNT */
+/* Description: Number of bytes transmitted in last granted transaction */
+
+/* Bits 7..0 : Number of bytes transmitted in last granted transaction */
+#define SPIS_TXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
+#define SPIS_TXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIS_TXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
+
+/* Register: SPIS_CONFIG */
+/* Description: Configuration register */
+
+/* Bit 2 : Serial clock (SCK) polarity */
+#define SPIS_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */
+#define SPIS_CONFIG_CPOL_Msk (0x1UL << SPIS_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */
+#define SPIS_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high */
+#define SPIS_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low */
+
+/* Bit 1 : Serial clock (SCK) phase */
+#define SPIS_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */
+#define SPIS_CONFIG_CPHA_Msk (0x1UL << SPIS_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */
+#define SPIS_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of clock, shift serial data on trailing edge */
+#define SPIS_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of clock, shift serial data on leading edge */
+
+/* Bit 0 : Bit order */
+#define SPIS_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */
+#define SPIS_CONFIG_ORDER_Msk (0x1UL << SPIS_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */
+#define SPIS_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit shifted out first */
+#define SPIS_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit shifted out first */
+
+/* Register: SPIS_DEF */
+/* Description: Default character. Character clocked out in case of an ignored transaction. */
+
+/* Bits 7..0 : Default character. Character clocked out in case of an ignored transaction. */
+#define SPIS_DEF_DEF_Pos (0UL) /*!< Position of DEF field. */
+#define SPIS_DEF_DEF_Msk (0xFFUL << SPIS_DEF_DEF_Pos) /*!< Bit mask of DEF field. */
+
+/* Register: SPIS_ORC */
+/* Description: Over-read character */
+
+/* Bits 7..0 : Over-read character. Character clocked out after an over-read of the transmit buffer. */
+#define SPIS_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */
+#define SPIS_ORC_ORC_Msk (0xFFUL << SPIS_ORC_ORC_Pos) /*!< Bit mask of ORC field. */
+
+
+/* Peripheral: TEMP */
+/* Description: Temperature Sensor */
+
+/* Register: TEMP_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 0 : Write '1' to Enable interrupt for DATARDY event */
+#define TEMP_INTENSET_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */
+#define TEMP_INTENSET_DATARDY_Msk (0x1UL << TEMP_INTENSET_DATARDY_Pos) /*!< Bit mask of DATARDY field. */
+#define TEMP_INTENSET_DATARDY_Disabled (0UL) /*!< Read: Disabled */
+#define TEMP_INTENSET_DATARDY_Enabled (1UL) /*!< Read: Enabled */
+#define TEMP_INTENSET_DATARDY_Set (1UL) /*!< Enable */
+
+/* Register: TEMP_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 0 : Write '1' to Disable interrupt for DATARDY event */
+#define TEMP_INTENCLR_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */
+#define TEMP_INTENCLR_DATARDY_Msk (0x1UL << TEMP_INTENCLR_DATARDY_Pos) /*!< Bit mask of DATARDY field. */
+#define TEMP_INTENCLR_DATARDY_Disabled (0UL) /*!< Read: Disabled */
+#define TEMP_INTENCLR_DATARDY_Enabled (1UL) /*!< Read: Enabled */
+#define TEMP_INTENCLR_DATARDY_Clear (1UL) /*!< Disable */
+
+/* Register: TEMP_TEMP */
+/* Description: Temperature in degC (0.25deg steps) */
+
+/* Bits 31..0 : Temperature in degC (0.25deg steps) */
+#define TEMP_TEMP_TEMP_Pos (0UL) /*!< Position of TEMP field. */
+#define TEMP_TEMP_TEMP_Msk (0xFFFFFFFFUL << TEMP_TEMP_TEMP_Pos) /*!< Bit mask of TEMP field. */
+
+/* Register: TEMP_A0 */
+/* Description: Slope of 1st piece wise linear function */
+
+/* Bits 11..0 : Slope of 1st piece wise linear function */
+#define TEMP_A0_A0_Pos (0UL) /*!< Position of A0 field. */
+#define TEMP_A0_A0_Msk (0xFFFUL << TEMP_A0_A0_Pos) /*!< Bit mask of A0 field. */
+
+/* Register: TEMP_A1 */
+/* Description: Slope of 2nd piece wise linear function */
+
+/* Bits 11..0 : Slope of 2nd piece wise linear function */
+#define TEMP_A1_A1_Pos (0UL) /*!< Position of A1 field. */
+#define TEMP_A1_A1_Msk (0xFFFUL << TEMP_A1_A1_Pos) /*!< Bit mask of A1 field. */
+
+/* Register: TEMP_A2 */
+/* Description: Slope of 3rd piece wise linear function */
+
+/* Bits 11..0 : Slope of 3rd piece wise linear function */
+#define TEMP_A2_A2_Pos (0UL) /*!< Position of A2 field. */
+#define TEMP_A2_A2_Msk (0xFFFUL << TEMP_A2_A2_Pos) /*!< Bit mask of A2 field. */
+
+/* Register: TEMP_A3 */
+/* Description: Slope of 4th piece wise linear function */
+
+/* Bits 11..0 : Slope of 4th piece wise linear function */
+#define TEMP_A3_A3_Pos (0UL) /*!< Position of A3 field. */
+#define TEMP_A3_A3_Msk (0xFFFUL << TEMP_A3_A3_Pos) /*!< Bit mask of A3 field. */
+
+/* Register: TEMP_A4 */
+/* Description: Slope of 5th piece wise linear function */
+
+/* Bits 11..0 : Slope of 5th piece wise linear function */
+#define TEMP_A4_A4_Pos (0UL) /*!< Position of A4 field. */
+#define TEMP_A4_A4_Msk (0xFFFUL << TEMP_A4_A4_Pos) /*!< Bit mask of A4 field. */
+
+/* Register: TEMP_A5 */
+/* Description: Slope of 6th piece wise linear function */
+
+/* Bits 11..0 : Slope of 6th piece wise linear function */
+#define TEMP_A5_A5_Pos (0UL) /*!< Position of A5 field. */
+#define TEMP_A5_A5_Msk (0xFFFUL << TEMP_A5_A5_Pos) /*!< Bit mask of A5 field. */
+
+/* Register: TEMP_B0 */
+/* Description: y-intercept of 1st piece wise linear function */
+
+/* Bits 13..0 : y-intercept of 1st piece wise linear function */
+#define TEMP_B0_B0_Pos (0UL) /*!< Position of B0 field. */
+#define TEMP_B0_B0_Msk (0x3FFFUL << TEMP_B0_B0_Pos) /*!< Bit mask of B0 field. */
+
+/* Register: TEMP_B1 */
+/* Description: y-intercept of 2nd piece wise linear function */
+
+/* Bits 13..0 : y-intercept of 2nd piece wise linear function */
+#define TEMP_B1_B1_Pos (0UL) /*!< Position of B1 field. */
+#define TEMP_B1_B1_Msk (0x3FFFUL << TEMP_B1_B1_Pos) /*!< Bit mask of B1 field. */
+
+/* Register: TEMP_B2 */
+/* Description: y-intercept of 3rd piece wise linear function */
+
+/* Bits 13..0 : y-intercept of 3rd piece wise linear function */
+#define TEMP_B2_B2_Pos (0UL) /*!< Position of B2 field. */
+#define TEMP_B2_B2_Msk (0x3FFFUL << TEMP_B2_B2_Pos) /*!< Bit mask of B2 field. */
+
+/* Register: TEMP_B3 */
+/* Description: y-intercept of 4th piece wise linear function */
+
+/* Bits 13..0 : y-intercept of 4th piece wise linear function */
+#define TEMP_B3_B3_Pos (0UL) /*!< Position of B3 field. */
+#define TEMP_B3_B3_Msk (0x3FFFUL << TEMP_B3_B3_Pos) /*!< Bit mask of B3 field. */
+
+/* Register: TEMP_B4 */
+/* Description: y-intercept of 5th piece wise linear function */
+
+/* Bits 13..0 : y-intercept of 5th piece wise linear function */
+#define TEMP_B4_B4_Pos (0UL) /*!< Position of B4 field. */
+#define TEMP_B4_B4_Msk (0x3FFFUL << TEMP_B4_B4_Pos) /*!< Bit mask of B4 field. */
+
+/* Register: TEMP_B5 */
+/* Description: y-intercept of 6th piece wise linear function */
+
+/* Bits 13..0 : y-intercept of 6th piece wise linear function */
+#define TEMP_B5_B5_Pos (0UL) /*!< Position of B5 field. */
+#define TEMP_B5_B5_Msk (0x3FFFUL << TEMP_B5_B5_Pos) /*!< Bit mask of B5 field. */
+
+/* Register: TEMP_T0 */
+/* Description: End point of 1st piece wise linear function */
+
+/* Bits 7..0 : End point of 1st piece wise linear function */
+#define TEMP_T0_T0_Pos (0UL) /*!< Position of T0 field. */
+#define TEMP_T0_T0_Msk (0xFFUL << TEMP_T0_T0_Pos) /*!< Bit mask of T0 field. */
+
+/* Register: TEMP_T1 */
+/* Description: End point of 2nd piece wise linear function */
+
+/* Bits 7..0 : End point of 2nd piece wise linear function */
+#define TEMP_T1_T1_Pos (0UL) /*!< Position of T1 field. */
+#define TEMP_T1_T1_Msk (0xFFUL << TEMP_T1_T1_Pos) /*!< Bit mask of T1 field. */
+
+/* Register: TEMP_T2 */
+/* Description: End point of 3rd piece wise linear function */
+
+/* Bits 7..0 : End point of 3rd piece wise linear function */
+#define TEMP_T2_T2_Pos (0UL) /*!< Position of T2 field. */
+#define TEMP_T2_T2_Msk (0xFFUL << TEMP_T2_T2_Pos) /*!< Bit mask of T2 field. */
+
+/* Register: TEMP_T3 */
+/* Description: End point of 4th piece wise linear function */
+
+/* Bits 7..0 : End point of 4th piece wise linear function */
+#define TEMP_T3_T3_Pos (0UL) /*!< Position of T3 field. */
+#define TEMP_T3_T3_Msk (0xFFUL << TEMP_T3_T3_Pos) /*!< Bit mask of T3 field. */
+
+/* Register: TEMP_T4 */
+/* Description: End point of 5th piece wise linear function */
+
+/* Bits 7..0 : End point of 5th piece wise linear function */
+#define TEMP_T4_T4_Pos (0UL) /*!< Position of T4 field. */
+#define TEMP_T4_T4_Msk (0xFFUL << TEMP_T4_T4_Pos) /*!< Bit mask of T4 field. */
+
+
+/* Peripheral: TIMER */
+/* Description: Timer/Counter 0 */
+
+/* Register: TIMER_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 13 : Shortcut between COMPARE[5] event and STOP task */
+#define TIMER_SHORTS_COMPARE5_STOP_Pos (13UL) /*!< Position of COMPARE5_STOP field. */
+#define TIMER_SHORTS_COMPARE5_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE5_STOP_Pos) /*!< Bit mask of COMPARE5_STOP field. */
+#define TIMER_SHORTS_COMPARE5_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define TIMER_SHORTS_COMPARE5_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 12 : Shortcut between COMPARE[4] event and STOP task */
+#define TIMER_SHORTS_COMPARE4_STOP_Pos (12UL) /*!< Position of COMPARE4_STOP field. */
+#define TIMER_SHORTS_COMPARE4_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE4_STOP_Pos) /*!< Bit mask of COMPARE4_STOP field. */
+#define TIMER_SHORTS_COMPARE4_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define TIMER_SHORTS_COMPARE4_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 11 : Shortcut between COMPARE[3] event and STOP task */
+#define TIMER_SHORTS_COMPARE3_STOP_Pos (11UL) /*!< Position of COMPARE3_STOP field. */
+#define TIMER_SHORTS_COMPARE3_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE3_STOP_Pos) /*!< Bit mask of COMPARE3_STOP field. */
+#define TIMER_SHORTS_COMPARE3_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define TIMER_SHORTS_COMPARE3_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 10 : Shortcut between COMPARE[2] event and STOP task */
+#define TIMER_SHORTS_COMPARE2_STOP_Pos (10UL) /*!< Position of COMPARE2_STOP field. */
+#define TIMER_SHORTS_COMPARE2_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE2_STOP_Pos) /*!< Bit mask of COMPARE2_STOP field. */
+#define TIMER_SHORTS_COMPARE2_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define TIMER_SHORTS_COMPARE2_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 9 : Shortcut between COMPARE[1] event and STOP task */
+#define TIMER_SHORTS_COMPARE1_STOP_Pos (9UL) /*!< Position of COMPARE1_STOP field. */
+#define TIMER_SHORTS_COMPARE1_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE1_STOP_Pos) /*!< Bit mask of COMPARE1_STOP field. */
+#define TIMER_SHORTS_COMPARE1_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define TIMER_SHORTS_COMPARE1_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 8 : Shortcut between COMPARE[0] event and STOP task */
+#define TIMER_SHORTS_COMPARE0_STOP_Pos (8UL) /*!< Position of COMPARE0_STOP field. */
+#define TIMER_SHORTS_COMPARE0_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE0_STOP_Pos) /*!< Bit mask of COMPARE0_STOP field. */
+#define TIMER_SHORTS_COMPARE0_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define TIMER_SHORTS_COMPARE0_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 5 : Shortcut between COMPARE[5] event and CLEAR task */
+#define TIMER_SHORTS_COMPARE5_CLEAR_Pos (5UL) /*!< Position of COMPARE5_CLEAR field. */
+#define TIMER_SHORTS_COMPARE5_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE5_CLEAR_Pos) /*!< Bit mask of COMPARE5_CLEAR field. */
+#define TIMER_SHORTS_COMPARE5_CLEAR_Disabled (0UL) /*!< Disable shortcut */
+#define TIMER_SHORTS_COMPARE5_CLEAR_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 4 : Shortcut between COMPARE[4] event and CLEAR task */
+#define TIMER_SHORTS_COMPARE4_CLEAR_Pos (4UL) /*!< Position of COMPARE4_CLEAR field. */
+#define TIMER_SHORTS_COMPARE4_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE4_CLEAR_Pos) /*!< Bit mask of COMPARE4_CLEAR field. */
+#define TIMER_SHORTS_COMPARE4_CLEAR_Disabled (0UL) /*!< Disable shortcut */
+#define TIMER_SHORTS_COMPARE4_CLEAR_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 3 : Shortcut between COMPARE[3] event and CLEAR task */
+#define TIMER_SHORTS_COMPARE3_CLEAR_Pos (3UL) /*!< Position of COMPARE3_CLEAR field. */
+#define TIMER_SHORTS_COMPARE3_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE3_CLEAR_Pos) /*!< Bit mask of COMPARE3_CLEAR field. */
+#define TIMER_SHORTS_COMPARE3_CLEAR_Disabled (0UL) /*!< Disable shortcut */
+#define TIMER_SHORTS_COMPARE3_CLEAR_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 2 : Shortcut between COMPARE[2] event and CLEAR task */
+#define TIMER_SHORTS_COMPARE2_CLEAR_Pos (2UL) /*!< Position of COMPARE2_CLEAR field. */
+#define TIMER_SHORTS_COMPARE2_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE2_CLEAR_Pos) /*!< Bit mask of COMPARE2_CLEAR field. */
+#define TIMER_SHORTS_COMPARE2_CLEAR_Disabled (0UL) /*!< Disable shortcut */
+#define TIMER_SHORTS_COMPARE2_CLEAR_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 1 : Shortcut between COMPARE[1] event and CLEAR task */
+#define TIMER_SHORTS_COMPARE1_CLEAR_Pos (1UL) /*!< Position of COMPARE1_CLEAR field. */
+#define TIMER_SHORTS_COMPARE1_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE1_CLEAR_Pos) /*!< Bit mask of COMPARE1_CLEAR field. */
+#define TIMER_SHORTS_COMPARE1_CLEAR_Disabled (0UL) /*!< Disable shortcut */
+#define TIMER_SHORTS_COMPARE1_CLEAR_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 0 : Shortcut between COMPARE[0] event and CLEAR task */
+#define TIMER_SHORTS_COMPARE0_CLEAR_Pos (0UL) /*!< Position of COMPARE0_CLEAR field. */
+#define TIMER_SHORTS_COMPARE0_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE0_CLEAR_Pos) /*!< Bit mask of COMPARE0_CLEAR field. */
+#define TIMER_SHORTS_COMPARE0_CLEAR_Disabled (0UL) /*!< Disable shortcut */
+#define TIMER_SHORTS_COMPARE0_CLEAR_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: TIMER_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 21 : Write '1' to Enable interrupt for COMPARE[5] event */
+#define TIMER_INTENSET_COMPARE5_Pos (21UL) /*!< Position of COMPARE5 field. */
+#define TIMER_INTENSET_COMPARE5_Msk (0x1UL << TIMER_INTENSET_COMPARE5_Pos) /*!< Bit mask of COMPARE5 field. */
+#define TIMER_INTENSET_COMPARE5_Disabled (0UL) /*!< Read: Disabled */
+#define TIMER_INTENSET_COMPARE5_Enabled (1UL) /*!< Read: Enabled */
+#define TIMER_INTENSET_COMPARE5_Set (1UL) /*!< Enable */
+
+/* Bit 20 : Write '1' to Enable interrupt for COMPARE[4] event */
+#define TIMER_INTENSET_COMPARE4_Pos (20UL) /*!< Position of COMPARE4 field. */
+#define TIMER_INTENSET_COMPARE4_Msk (0x1UL << TIMER_INTENSET_COMPARE4_Pos) /*!< Bit mask of COMPARE4 field. */
+#define TIMER_INTENSET_COMPARE4_Disabled (0UL) /*!< Read: Disabled */
+#define TIMER_INTENSET_COMPARE4_Enabled (1UL) /*!< Read: Enabled */
+#define TIMER_INTENSET_COMPARE4_Set (1UL) /*!< Enable */
+
+/* Bit 19 : Write '1' to Enable interrupt for COMPARE[3] event */
+#define TIMER_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define TIMER_INTENSET_COMPARE3_Msk (0x1UL << TIMER_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define TIMER_INTENSET_COMPARE3_Disabled (0UL) /*!< Read: Disabled */
+#define TIMER_INTENSET_COMPARE3_Enabled (1UL) /*!< Read: Enabled */
+#define TIMER_INTENSET_COMPARE3_Set (1UL) /*!< Enable */
+
+/* Bit 18 : Write '1' to Enable interrupt for COMPARE[2] event */
+#define TIMER_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define TIMER_INTENSET_COMPARE2_Msk (0x1UL << TIMER_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define TIMER_INTENSET_COMPARE2_Disabled (0UL) /*!< Read: Disabled */
+#define TIMER_INTENSET_COMPARE2_Enabled (1UL) /*!< Read: Enabled */
+#define TIMER_INTENSET_COMPARE2_Set (1UL) /*!< Enable */
+
+/* Bit 17 : Write '1' to Enable interrupt for COMPARE[1] event */
+#define TIMER_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define TIMER_INTENSET_COMPARE1_Msk (0x1UL << TIMER_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define TIMER_INTENSET_COMPARE1_Disabled (0UL) /*!< Read: Disabled */
+#define TIMER_INTENSET_COMPARE1_Enabled (1UL) /*!< Read: Enabled */
+#define TIMER_INTENSET_COMPARE1_Set (1UL) /*!< Enable */
+
+/* Bit 16 : Write '1' to Enable interrupt for COMPARE[0] event */
+#define TIMER_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define TIMER_INTENSET_COMPARE0_Msk (0x1UL << TIMER_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define TIMER_INTENSET_COMPARE0_Disabled (0UL) /*!< Read: Disabled */
+#define TIMER_INTENSET_COMPARE0_Enabled (1UL) /*!< Read: Enabled */
+#define TIMER_INTENSET_COMPARE0_Set (1UL) /*!< Enable */
+
+/* Register: TIMER_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 21 : Write '1' to Disable interrupt for COMPARE[5] event */
+#define TIMER_INTENCLR_COMPARE5_Pos (21UL) /*!< Position of COMPARE5 field. */
+#define TIMER_INTENCLR_COMPARE5_Msk (0x1UL << TIMER_INTENCLR_COMPARE5_Pos) /*!< Bit mask of COMPARE5 field. */
+#define TIMER_INTENCLR_COMPARE5_Disabled (0UL) /*!< Read: Disabled */
+#define TIMER_INTENCLR_COMPARE5_Enabled (1UL) /*!< Read: Enabled */
+#define TIMER_INTENCLR_COMPARE5_Clear (1UL) /*!< Disable */
+
+/* Bit 20 : Write '1' to Disable interrupt for COMPARE[4] event */
+#define TIMER_INTENCLR_COMPARE4_Pos (20UL) /*!< Position of COMPARE4 field. */
+#define TIMER_INTENCLR_COMPARE4_Msk (0x1UL << TIMER_INTENCLR_COMPARE4_Pos) /*!< Bit mask of COMPARE4 field. */
+#define TIMER_INTENCLR_COMPARE4_Disabled (0UL) /*!< Read: Disabled */
+#define TIMER_INTENCLR_COMPARE4_Enabled (1UL) /*!< Read: Enabled */
+#define TIMER_INTENCLR_COMPARE4_Clear (1UL) /*!< Disable */
+
+/* Bit 19 : Write '1' to Disable interrupt for COMPARE[3] event */
+#define TIMER_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define TIMER_INTENCLR_COMPARE3_Msk (0x1UL << TIMER_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define TIMER_INTENCLR_COMPARE3_Disabled (0UL) /*!< Read: Disabled */
+#define TIMER_INTENCLR_COMPARE3_Enabled (1UL) /*!< Read: Enabled */
+#define TIMER_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable */
+
+/* Bit 18 : Write '1' to Disable interrupt for COMPARE[2] event */
+#define TIMER_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define TIMER_INTENCLR_COMPARE2_Msk (0x1UL << TIMER_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define TIMER_INTENCLR_COMPARE2_Disabled (0UL) /*!< Read: Disabled */
+#define TIMER_INTENCLR_COMPARE2_Enabled (1UL) /*!< Read: Enabled */
+#define TIMER_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable */
+
+/* Bit 17 : Write '1' to Disable interrupt for COMPARE[1] event */
+#define TIMER_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define TIMER_INTENCLR_COMPARE1_Msk (0x1UL << TIMER_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define TIMER_INTENCLR_COMPARE1_Disabled (0UL) /*!< Read: Disabled */
+#define TIMER_INTENCLR_COMPARE1_Enabled (1UL) /*!< Read: Enabled */
+#define TIMER_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable */
+
+/* Bit 16 : Write '1' to Disable interrupt for COMPARE[0] event */
+#define TIMER_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define TIMER_INTENCLR_COMPARE0_Msk (0x1UL << TIMER_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define TIMER_INTENCLR_COMPARE0_Disabled (0UL) /*!< Read: Disabled */
+#define TIMER_INTENCLR_COMPARE0_Enabled (1UL) /*!< Read: Enabled */
+#define TIMER_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable */
+
+/* Register: TIMER_MODE */
+/* Description: Timer mode selection */
+
+/* Bits 1..0 : Timer mode */
+#define TIMER_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */
+#define TIMER_MODE_MODE_Msk (0x3UL << TIMER_MODE_MODE_Pos) /*!< Bit mask of MODE field. */
+#define TIMER_MODE_MODE_Timer (0UL) /*!< Select Timer mode */
+#define TIMER_MODE_MODE_Counter (1UL) /*!< Deprecated enumerator - Select Counter mode */
+#define TIMER_MODE_MODE_LowPowerCounter (2UL) /*!< Select Low Power Counter mode */
+
+/* Register: TIMER_BITMODE */
+/* Description: Configure the number of bits used by the TIMER */
+
+/* Bits 1..0 : Timer bit width */
+#define TIMER_BITMODE_BITMODE_Pos (0UL) /*!< Position of BITMODE field. */
+#define TIMER_BITMODE_BITMODE_Msk (0x3UL << TIMER_BITMODE_BITMODE_Pos) /*!< Bit mask of BITMODE field. */
+#define TIMER_BITMODE_BITMODE_16Bit (0UL) /*!< 16 bit timer bit width */
+#define TIMER_BITMODE_BITMODE_08Bit (1UL) /*!< 8 bit timer bit width */
+#define TIMER_BITMODE_BITMODE_24Bit (2UL) /*!< 24 bit timer bit width */
+#define TIMER_BITMODE_BITMODE_32Bit (3UL) /*!< 32 bit timer bit width */
+
+/* Register: TIMER_PRESCALER */
+/* Description: Timer prescaler register */
+
+/* Bits 3..0 : Prescaler value */
+#define TIMER_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */
+#define TIMER_PRESCALER_PRESCALER_Msk (0xFUL << TIMER_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */
+
+/* Register: TIMER_CC */
+/* Description: Description collection[0]: Capture/Compare register 0 */
+
+/* Bits 31..0 : Capture/Compare value */
+#define TIMER_CC_CC_Pos (0UL) /*!< Position of CC field. */
+#define TIMER_CC_CC_Msk (0xFFFFFFFFUL << TIMER_CC_CC_Pos) /*!< Bit mask of CC field. */
+
+
+/* Peripheral: TWI */
+/* Description: I2C compatible Two-Wire Interface 0 */
+
+/* Register: TWI_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 1 : Shortcut between BB event and STOP task */
+#define TWI_SHORTS_BB_STOP_Pos (1UL) /*!< Position of BB_STOP field. */
+#define TWI_SHORTS_BB_STOP_Msk (0x1UL << TWI_SHORTS_BB_STOP_Pos) /*!< Bit mask of BB_STOP field. */
+#define TWI_SHORTS_BB_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define TWI_SHORTS_BB_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 0 : Shortcut between BB event and SUSPEND task */
+#define TWI_SHORTS_BB_SUSPEND_Pos (0UL) /*!< Position of BB_SUSPEND field. */
+#define TWI_SHORTS_BB_SUSPEND_Msk (0x1UL << TWI_SHORTS_BB_SUSPEND_Pos) /*!< Bit mask of BB_SUSPEND field. */
+#define TWI_SHORTS_BB_SUSPEND_Disabled (0UL) /*!< Disable shortcut */
+#define TWI_SHORTS_BB_SUSPEND_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: TWI_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 18 : Write '1' to Enable interrupt for SUSPENDED event */
+#define TWI_INTENSET_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */
+#define TWI_INTENSET_SUSPENDED_Msk (0x1UL << TWI_INTENSET_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */
+#define TWI_INTENSET_SUSPENDED_Disabled (0UL) /*!< Read: Disabled */
+#define TWI_INTENSET_SUSPENDED_Enabled (1UL) /*!< Read: Enabled */
+#define TWI_INTENSET_SUSPENDED_Set (1UL) /*!< Enable */
+
+/* Bit 14 : Write '1' to Enable interrupt for BB event */
+#define TWI_INTENSET_BB_Pos (14UL) /*!< Position of BB field. */
+#define TWI_INTENSET_BB_Msk (0x1UL << TWI_INTENSET_BB_Pos) /*!< Bit mask of BB field. */
+#define TWI_INTENSET_BB_Disabled (0UL) /*!< Read: Disabled */
+#define TWI_INTENSET_BB_Enabled (1UL) /*!< Read: Enabled */
+#define TWI_INTENSET_BB_Set (1UL) /*!< Enable */
+
+/* Bit 9 : Write '1' to Enable interrupt for ERROR event */
+#define TWI_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define TWI_INTENSET_ERROR_Msk (0x1UL << TWI_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define TWI_INTENSET_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define TWI_INTENSET_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define TWI_INTENSET_ERROR_Set (1UL) /*!< Enable */
+
+/* Bit 7 : Write '1' to Enable interrupt for TXDSENT event */
+#define TWI_INTENSET_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */
+#define TWI_INTENSET_TXDSENT_Msk (0x1UL << TWI_INTENSET_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */
+#define TWI_INTENSET_TXDSENT_Disabled (0UL) /*!< Read: Disabled */
+#define TWI_INTENSET_TXDSENT_Enabled (1UL) /*!< Read: Enabled */
+#define TWI_INTENSET_TXDSENT_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for RXDREADY event */
+#define TWI_INTENSET_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */
+#define TWI_INTENSET_RXDREADY_Msk (0x1UL << TWI_INTENSET_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */
+#define TWI_INTENSET_RXDREADY_Disabled (0UL) /*!< Read: Disabled */
+#define TWI_INTENSET_RXDREADY_Enabled (1UL) /*!< Read: Enabled */
+#define TWI_INTENSET_RXDREADY_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for STOPPED event */
+#define TWI_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define TWI_INTENSET_STOPPED_Msk (0x1UL << TWI_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define TWI_INTENSET_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define TWI_INTENSET_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define TWI_INTENSET_STOPPED_Set (1UL) /*!< Enable */
+
+/* Register: TWI_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 18 : Write '1' to Disable interrupt for SUSPENDED event */
+#define TWI_INTENCLR_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */
+#define TWI_INTENCLR_SUSPENDED_Msk (0x1UL << TWI_INTENCLR_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */
+#define TWI_INTENCLR_SUSPENDED_Disabled (0UL) /*!< Read: Disabled */
+#define TWI_INTENCLR_SUSPENDED_Enabled (1UL) /*!< Read: Enabled */
+#define TWI_INTENCLR_SUSPENDED_Clear (1UL) /*!< Disable */
+
+/* Bit 14 : Write '1' to Disable interrupt for BB event */
+#define TWI_INTENCLR_BB_Pos (14UL) /*!< Position of BB field. */
+#define TWI_INTENCLR_BB_Msk (0x1UL << TWI_INTENCLR_BB_Pos) /*!< Bit mask of BB field. */
+#define TWI_INTENCLR_BB_Disabled (0UL) /*!< Read: Disabled */
+#define TWI_INTENCLR_BB_Enabled (1UL) /*!< Read: Enabled */
+#define TWI_INTENCLR_BB_Clear (1UL) /*!< Disable */
+
+/* Bit 9 : Write '1' to Disable interrupt for ERROR event */
+#define TWI_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define TWI_INTENCLR_ERROR_Msk (0x1UL << TWI_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define TWI_INTENCLR_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define TWI_INTENCLR_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define TWI_INTENCLR_ERROR_Clear (1UL) /*!< Disable */
+
+/* Bit 7 : Write '1' to Disable interrupt for TXDSENT event */
+#define TWI_INTENCLR_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */
+#define TWI_INTENCLR_TXDSENT_Msk (0x1UL << TWI_INTENCLR_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */
+#define TWI_INTENCLR_TXDSENT_Disabled (0UL) /*!< Read: Disabled */
+#define TWI_INTENCLR_TXDSENT_Enabled (1UL) /*!< Read: Enabled */
+#define TWI_INTENCLR_TXDSENT_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for RXDREADY event */
+#define TWI_INTENCLR_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */
+#define TWI_INTENCLR_RXDREADY_Msk (0x1UL << TWI_INTENCLR_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */
+#define TWI_INTENCLR_RXDREADY_Disabled (0UL) /*!< Read: Disabled */
+#define TWI_INTENCLR_RXDREADY_Enabled (1UL) /*!< Read: Enabled */
+#define TWI_INTENCLR_RXDREADY_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for STOPPED event */
+#define TWI_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define TWI_INTENCLR_STOPPED_Msk (0x1UL << TWI_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define TWI_INTENCLR_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define TWI_INTENCLR_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define TWI_INTENCLR_STOPPED_Clear (1UL) /*!< Disable */
+
+/* Register: TWI_ERRORSRC */
+/* Description: Error source */
+
+/* Bit 2 : NACK received after sending a data byte (write '1' to clear) */
+#define TWI_ERRORSRC_DNACK_Pos (2UL) /*!< Position of DNACK field. */
+#define TWI_ERRORSRC_DNACK_Msk (0x1UL << TWI_ERRORSRC_DNACK_Pos) /*!< Bit mask of DNACK field. */
+#define TWI_ERRORSRC_DNACK_NotPresent (0UL) /*!< Read: error not present */
+#define TWI_ERRORSRC_DNACK_Present (1UL) /*!< Read: error present */
+
+/* Bit 1 : NACK received after sending the address (write '1' to clear) */
+#define TWI_ERRORSRC_ANACK_Pos (1UL) /*!< Position of ANACK field. */
+#define TWI_ERRORSRC_ANACK_Msk (0x1UL << TWI_ERRORSRC_ANACK_Pos) /*!< Bit mask of ANACK field. */
+#define TWI_ERRORSRC_ANACK_NotPresent (0UL) /*!< Read: error not present */
+#define TWI_ERRORSRC_ANACK_Present (1UL) /*!< Read: error present */
+
+/* Bit 0 : Overrun error */
+#define TWI_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */
+#define TWI_ERRORSRC_OVERRUN_Msk (0x1UL << TWI_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */
+#define TWI_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Read: no overrun occured */
+#define TWI_ERRORSRC_OVERRUN_Present (1UL) /*!< Read: overrun occured */
+
+/* Register: TWI_ENABLE */
+/* Description: Enable TWI */
+
+/* Bits 3..0 : Enable or disable TWI */
+#define TWI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define TWI_ENABLE_ENABLE_Msk (0xFUL << TWI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define TWI_ENABLE_ENABLE_Disabled (0UL) /*!< Disable TWI */
+#define TWI_ENABLE_ENABLE_Enabled (5UL) /*!< Enable TWI */
+
+/* Register: TWI_PSELSCL */
+/* Description: Pin select for SCL */
+
+/* Bits 31..0 : Pin number configuration for TWI SCL signal */
+#define TWI_PSELSCL_PSELSCL_Pos (0UL) /*!< Position of PSELSCL field. */
+#define TWI_PSELSCL_PSELSCL_Msk (0xFFFFFFFFUL << TWI_PSELSCL_PSELSCL_Pos) /*!< Bit mask of PSELSCL field. */
+#define TWI_PSELSCL_PSELSCL_Disconnected (0xFFFFFFFFUL) /*!< Disconnect */
+
+/* Register: TWI_PSELSDA */
+/* Description: Pin select for SDA */
+
+/* Bits 31..0 : Pin number configuration for TWI SDA signal */
+#define TWI_PSELSDA_PSELSDA_Pos (0UL) /*!< Position of PSELSDA field. */
+#define TWI_PSELSDA_PSELSDA_Msk (0xFFFFFFFFUL << TWI_PSELSDA_PSELSDA_Pos) /*!< Bit mask of PSELSDA field. */
+#define TWI_PSELSDA_PSELSDA_Disconnected (0xFFFFFFFFUL) /*!< Disconnect */
+
+/* Register: TWI_RXD */
+/* Description: RXD register */
+
+/* Bits 7..0 : RXD register */
+#define TWI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */
+#define TWI_RXD_RXD_Msk (0xFFUL << TWI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */
+
+/* Register: TWI_TXD */
+/* Description: TXD register */
+
+/* Bits 7..0 : TXD register */
+#define TWI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */
+#define TWI_TXD_TXD_Msk (0xFFUL << TWI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */
+
+/* Register: TWI_FREQUENCY */
+/* Description: TWI frequency */
+
+/* Bits 31..0 : TWI master clock frequency */
+#define TWI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
+#define TWI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << TWI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
+#define TWI_FREQUENCY_FREQUENCY_K100 (0x01980000UL) /*!< 100 kbps */
+#define TWI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps */
+#define TWI_FREQUENCY_FREQUENCY_K400 (0x06680000UL) /*!< 400 kbps (actual rate 410.256 kbps) */
+
+/* Register: TWI_ADDRESS */
+/* Description: Address used in the TWI transfer */
+
+/* Bits 6..0 : Address used in the TWI transfer */
+#define TWI_ADDRESS_ADDRESS_Pos (0UL) /*!< Position of ADDRESS field. */
+#define TWI_ADDRESS_ADDRESS_Msk (0x7FUL << TWI_ADDRESS_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */
+
+
+/* Peripheral: TWIM */
+/* Description: I2C compatible Two-Wire Master Interface with EasyDMA 0 */
+
+/* Register: TWIM_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 12 : Shortcut between LASTRX event and STOP task */
+#define TWIM_SHORTS_LASTRX_STOP_Pos (12UL) /*!< Position of LASTRX_STOP field. */
+#define TWIM_SHORTS_LASTRX_STOP_Msk (0x1UL << TWIM_SHORTS_LASTRX_STOP_Pos) /*!< Bit mask of LASTRX_STOP field. */
+#define TWIM_SHORTS_LASTRX_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define TWIM_SHORTS_LASTRX_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 10 : Shortcut between LASTRX event and STARTTX task */
+#define TWIM_SHORTS_LASTRX_STARTTX_Pos (10UL) /*!< Position of LASTRX_STARTTX field. */
+#define TWIM_SHORTS_LASTRX_STARTTX_Msk (0x1UL << TWIM_SHORTS_LASTRX_STARTTX_Pos) /*!< Bit mask of LASTRX_STARTTX field. */
+#define TWIM_SHORTS_LASTRX_STARTTX_Disabled (0UL) /*!< Disable shortcut */
+#define TWIM_SHORTS_LASTRX_STARTTX_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 9 : Shortcut between LASTTX event and STOP task */
+#define TWIM_SHORTS_LASTTX_STOP_Pos (9UL) /*!< Position of LASTTX_STOP field. */
+#define TWIM_SHORTS_LASTTX_STOP_Msk (0x1UL << TWIM_SHORTS_LASTTX_STOP_Pos) /*!< Bit mask of LASTTX_STOP field. */
+#define TWIM_SHORTS_LASTTX_STOP_Disabled (0UL) /*!< Disable shortcut */
+#define TWIM_SHORTS_LASTTX_STOP_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 8 : Shortcut between LASTTX event and SUSPEND task */
+#define TWIM_SHORTS_LASTTX_SUSPEND_Pos (8UL) /*!< Position of LASTTX_SUSPEND field. */
+#define TWIM_SHORTS_LASTTX_SUSPEND_Msk (0x1UL << TWIM_SHORTS_LASTTX_SUSPEND_Pos) /*!< Bit mask of LASTTX_SUSPEND field. */
+#define TWIM_SHORTS_LASTTX_SUSPEND_Disabled (0UL) /*!< Disable shortcut */
+#define TWIM_SHORTS_LASTTX_SUSPEND_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 7 : Shortcut between LASTTX event and STARTRX task */
+#define TWIM_SHORTS_LASTTX_STARTRX_Pos (7UL) /*!< Position of LASTTX_STARTRX field. */
+#define TWIM_SHORTS_LASTTX_STARTRX_Msk (0x1UL << TWIM_SHORTS_LASTTX_STARTRX_Pos) /*!< Bit mask of LASTTX_STARTRX field. */
+#define TWIM_SHORTS_LASTTX_STARTRX_Disabled (0UL) /*!< Disable shortcut */
+#define TWIM_SHORTS_LASTTX_STARTRX_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: TWIM_INTEN */
+/* Description: Enable or disable interrupt */
+
+/* Bit 24 : Enable or disable interrupt for LASTTX event */
+#define TWIM_INTEN_LASTTX_Pos (24UL) /*!< Position of LASTTX field. */
+#define TWIM_INTEN_LASTTX_Msk (0x1UL << TWIM_INTEN_LASTTX_Pos) /*!< Bit mask of LASTTX field. */
+#define TWIM_INTEN_LASTTX_Disabled (0UL) /*!< Disable */
+#define TWIM_INTEN_LASTTX_Enabled (1UL) /*!< Enable */
+
+/* Bit 23 : Enable or disable interrupt for LASTRX event */
+#define TWIM_INTEN_LASTRX_Pos (23UL) /*!< Position of LASTRX field. */
+#define TWIM_INTEN_LASTRX_Msk (0x1UL << TWIM_INTEN_LASTRX_Pos) /*!< Bit mask of LASTRX field. */
+#define TWIM_INTEN_LASTRX_Disabled (0UL) /*!< Disable */
+#define TWIM_INTEN_LASTRX_Enabled (1UL) /*!< Enable */
+
+/* Bit 20 : Enable or disable interrupt for TXSTARTED event */
+#define TWIM_INTEN_TXSTARTED_Pos (20UL) /*!< Position of TXSTARTED field. */
+#define TWIM_INTEN_TXSTARTED_Msk (0x1UL << TWIM_INTEN_TXSTARTED_Pos) /*!< Bit mask of TXSTARTED field. */
+#define TWIM_INTEN_TXSTARTED_Disabled (0UL) /*!< Disable */
+#define TWIM_INTEN_TXSTARTED_Enabled (1UL) /*!< Enable */
+
+/* Bit 19 : Enable or disable interrupt for RXSTARTED event */
+#define TWIM_INTEN_RXSTARTED_Pos (19UL) /*!< Position of RXSTARTED field. */
+#define TWIM_INTEN_RXSTARTED_Msk (0x1UL << TWIM_INTEN_RXSTARTED_Pos) /*!< Bit mask of RXSTARTED field. */
+#define TWIM_INTEN_RXSTARTED_Disabled (0UL) /*!< Disable */
+#define TWIM_INTEN_RXSTARTED_Enabled (1UL) /*!< Enable */
+
+/* Bit 18 : Enable or disable interrupt for SUSPENDED event */
+#define TWIM_INTEN_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */
+#define TWIM_INTEN_SUSPENDED_Msk (0x1UL << TWIM_INTEN_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */
+#define TWIM_INTEN_SUSPENDED_Disabled (0UL) /*!< Disable */
+#define TWIM_INTEN_SUSPENDED_Enabled (1UL) /*!< Enable */
+
+/* Bit 9 : Enable or disable interrupt for ERROR event */
+#define TWIM_INTEN_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define TWIM_INTEN_ERROR_Msk (0x1UL << TWIM_INTEN_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define TWIM_INTEN_ERROR_Disabled (0UL) /*!< Disable */
+#define TWIM_INTEN_ERROR_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable interrupt for STOPPED event */
+#define TWIM_INTEN_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define TWIM_INTEN_STOPPED_Msk (0x1UL << TWIM_INTEN_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define TWIM_INTEN_STOPPED_Disabled (0UL) /*!< Disable */
+#define TWIM_INTEN_STOPPED_Enabled (1UL) /*!< Enable */
+
+/* Register: TWIM_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 24 : Write '1' to Enable interrupt for LASTTX event */
+#define TWIM_INTENSET_LASTTX_Pos (24UL) /*!< Position of LASTTX field. */
+#define TWIM_INTENSET_LASTTX_Msk (0x1UL << TWIM_INTENSET_LASTTX_Pos) /*!< Bit mask of LASTTX field. */
+#define TWIM_INTENSET_LASTTX_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENSET_LASTTX_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENSET_LASTTX_Set (1UL) /*!< Enable */
+
+/* Bit 23 : Write '1' to Enable interrupt for LASTRX event */
+#define TWIM_INTENSET_LASTRX_Pos (23UL) /*!< Position of LASTRX field. */
+#define TWIM_INTENSET_LASTRX_Msk (0x1UL << TWIM_INTENSET_LASTRX_Pos) /*!< Bit mask of LASTRX field. */
+#define TWIM_INTENSET_LASTRX_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENSET_LASTRX_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENSET_LASTRX_Set (1UL) /*!< Enable */
+
+/* Bit 20 : Write '1' to Enable interrupt for TXSTARTED event */
+#define TWIM_INTENSET_TXSTARTED_Pos (20UL) /*!< Position of TXSTARTED field. */
+#define TWIM_INTENSET_TXSTARTED_Msk (0x1UL << TWIM_INTENSET_TXSTARTED_Pos) /*!< Bit mask of TXSTARTED field. */
+#define TWIM_INTENSET_TXSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENSET_TXSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENSET_TXSTARTED_Set (1UL) /*!< Enable */
+
+/* Bit 19 : Write '1' to Enable interrupt for RXSTARTED event */
+#define TWIM_INTENSET_RXSTARTED_Pos (19UL) /*!< Position of RXSTARTED field. */
+#define TWIM_INTENSET_RXSTARTED_Msk (0x1UL << TWIM_INTENSET_RXSTARTED_Pos) /*!< Bit mask of RXSTARTED field. */
+#define TWIM_INTENSET_RXSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENSET_RXSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENSET_RXSTARTED_Set (1UL) /*!< Enable */
+
+/* Bit 18 : Write '1' to Enable interrupt for SUSPENDED event */
+#define TWIM_INTENSET_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */
+#define TWIM_INTENSET_SUSPENDED_Msk (0x1UL << TWIM_INTENSET_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */
+#define TWIM_INTENSET_SUSPENDED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENSET_SUSPENDED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENSET_SUSPENDED_Set (1UL) /*!< Enable */
+
+/* Bit 9 : Write '1' to Enable interrupt for ERROR event */
+#define TWIM_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define TWIM_INTENSET_ERROR_Msk (0x1UL << TWIM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define TWIM_INTENSET_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENSET_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENSET_ERROR_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for STOPPED event */
+#define TWIM_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define TWIM_INTENSET_STOPPED_Msk (0x1UL << TWIM_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define TWIM_INTENSET_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENSET_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENSET_STOPPED_Set (1UL) /*!< Enable */
+
+/* Register: TWIM_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 24 : Write '1' to Disable interrupt for LASTTX event */
+#define TWIM_INTENCLR_LASTTX_Pos (24UL) /*!< Position of LASTTX field. */
+#define TWIM_INTENCLR_LASTTX_Msk (0x1UL << TWIM_INTENCLR_LASTTX_Pos) /*!< Bit mask of LASTTX field. */
+#define TWIM_INTENCLR_LASTTX_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENCLR_LASTTX_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENCLR_LASTTX_Clear (1UL) /*!< Disable */
+
+/* Bit 23 : Write '1' to Disable interrupt for LASTRX event */
+#define TWIM_INTENCLR_LASTRX_Pos (23UL) /*!< Position of LASTRX field. */
+#define TWIM_INTENCLR_LASTRX_Msk (0x1UL << TWIM_INTENCLR_LASTRX_Pos) /*!< Bit mask of LASTRX field. */
+#define TWIM_INTENCLR_LASTRX_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENCLR_LASTRX_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENCLR_LASTRX_Clear (1UL) /*!< Disable */
+
+/* Bit 20 : Write '1' to Disable interrupt for TXSTARTED event */
+#define TWIM_INTENCLR_TXSTARTED_Pos (20UL) /*!< Position of TXSTARTED field. */
+#define TWIM_INTENCLR_TXSTARTED_Msk (0x1UL << TWIM_INTENCLR_TXSTARTED_Pos) /*!< Bit mask of TXSTARTED field. */
+#define TWIM_INTENCLR_TXSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENCLR_TXSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENCLR_TXSTARTED_Clear (1UL) /*!< Disable */
+
+/* Bit 19 : Write '1' to Disable interrupt for RXSTARTED event */
+#define TWIM_INTENCLR_RXSTARTED_Pos (19UL) /*!< Position of RXSTARTED field. */
+#define TWIM_INTENCLR_RXSTARTED_Msk (0x1UL << TWIM_INTENCLR_RXSTARTED_Pos) /*!< Bit mask of RXSTARTED field. */
+#define TWIM_INTENCLR_RXSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENCLR_RXSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENCLR_RXSTARTED_Clear (1UL) /*!< Disable */
+
+/* Bit 18 : Write '1' to Disable interrupt for SUSPENDED event */
+#define TWIM_INTENCLR_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */
+#define TWIM_INTENCLR_SUSPENDED_Msk (0x1UL << TWIM_INTENCLR_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */
+#define TWIM_INTENCLR_SUSPENDED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENCLR_SUSPENDED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENCLR_SUSPENDED_Clear (1UL) /*!< Disable */
+
+/* Bit 9 : Write '1' to Disable interrupt for ERROR event */
+#define TWIM_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define TWIM_INTENCLR_ERROR_Msk (0x1UL << TWIM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define TWIM_INTENCLR_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENCLR_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENCLR_ERROR_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for STOPPED event */
+#define TWIM_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define TWIM_INTENCLR_STOPPED_Msk (0x1UL << TWIM_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define TWIM_INTENCLR_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIM_INTENCLR_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIM_INTENCLR_STOPPED_Clear (1UL) /*!< Disable */
+
+/* Register: TWIM_ERRORSRC */
+/* Description: Error source */
+
+/* Bit 2 : NACK received after sending a data byte (write '1' to clear) */
+#define TWIM_ERRORSRC_DNACK_Pos (2UL) /*!< Position of DNACK field. */
+#define TWIM_ERRORSRC_DNACK_Msk (0x1UL << TWIM_ERRORSRC_DNACK_Pos) /*!< Bit mask of DNACK field. */
+#define TWIM_ERRORSRC_DNACK_NotReceived (0UL) /*!< Error did not occur */
+#define TWIM_ERRORSRC_DNACK_Received (1UL) /*!< Error occurred */
+
+/* Bit 1 : NACK received after sending the address (write '1' to clear) */
+#define TWIM_ERRORSRC_ANACK_Pos (1UL) /*!< Position of ANACK field. */
+#define TWIM_ERRORSRC_ANACK_Msk (0x1UL << TWIM_ERRORSRC_ANACK_Pos) /*!< Bit mask of ANACK field. */
+#define TWIM_ERRORSRC_ANACK_NotReceived (0UL) /*!< Error did not occur */
+#define TWIM_ERRORSRC_ANACK_Received (1UL) /*!< Error occurred */
+
+/* Register: TWIM_ENABLE */
+/* Description: Enable TWIM */
+
+/* Bits 3..0 : Enable or disable TWIM */
+#define TWIM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define TWIM_ENABLE_ENABLE_Msk (0xFUL << TWIM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define TWIM_ENABLE_ENABLE_Disabled (0UL) /*!< Disable TWIM */
+#define TWIM_ENABLE_ENABLE_Enabled (6UL) /*!< Enable TWIM */
+
+/* Register: TWIM_PSEL_SCL */
+/* Description: Pin select for SCL signal */
+
+/* Bit 31 : Connection */
+#define TWIM_PSEL_SCL_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define TWIM_PSEL_SCL_CONNECT_Msk (0x1UL << TWIM_PSEL_SCL_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define TWIM_PSEL_SCL_CONNECT_Connected (0UL) /*!< Connect */
+#define TWIM_PSEL_SCL_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define TWIM_PSEL_SCL_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define TWIM_PSEL_SCL_PIN_Msk (0x1FUL << TWIM_PSEL_SCL_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: TWIM_PSEL_SDA */
+/* Description: Pin select for SDA signal */
+
+/* Bit 31 : Connection */
+#define TWIM_PSEL_SDA_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define TWIM_PSEL_SDA_CONNECT_Msk (0x1UL << TWIM_PSEL_SDA_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define TWIM_PSEL_SDA_CONNECT_Connected (0UL) /*!< Connect */
+#define TWIM_PSEL_SDA_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define TWIM_PSEL_SDA_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define TWIM_PSEL_SDA_PIN_Msk (0x1FUL << TWIM_PSEL_SDA_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: TWIM_FREQUENCY */
+/* Description: TWI frequency */
+
+/* Bits 31..0 : TWI master clock frequency */
+#define TWIM_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
+#define TWIM_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << TWIM_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
+#define TWIM_FREQUENCY_FREQUENCY_K100 (0x01980000UL) /*!< 100 kbps */
+#define TWIM_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps */
+#define TWIM_FREQUENCY_FREQUENCY_K400 (0x06400000UL) /*!< 400 kbps */
+
+/* Register: TWIM_RXD_PTR */
+/* Description: Data pointer */
+
+/* Bits 31..0 : Data pointer */
+#define TWIM_RXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define TWIM_RXD_PTR_PTR_Msk (0xFFFFFFFFUL << TWIM_RXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: TWIM_RXD_MAXCNT */
+/* Description: Maximum number of bytes in receive buffer */
+
+/* Bits 7..0 : Maximum number of bytes in receive buffer */
+#define TWIM_RXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define TWIM_RXD_MAXCNT_MAXCNT_Msk (0xFFUL << TWIM_RXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: TWIM_RXD_AMOUNT */
+/* Description: Number of bytes transferred in the last transaction */
+
+/* Bits 7..0 : Number of bytes transferred in the last transaction. In case of NACK error, includes the NACK'ed byte. */
+#define TWIM_RXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
+#define TWIM_RXD_AMOUNT_AMOUNT_Msk (0xFFUL << TWIM_RXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
+
+/* Register: TWIM_RXD_LIST */
+/* Description: EasyDMA list type */
+
+/* Bits 2..0 : List type */
+#define TWIM_RXD_LIST_LIST_Pos (0UL) /*!< Position of LIST field. */
+#define TWIM_RXD_LIST_LIST_Msk (0x7UL << TWIM_RXD_LIST_LIST_Pos) /*!< Bit mask of LIST field. */
+#define TWIM_RXD_LIST_LIST_Disabled (0UL) /*!< Disable EasyDMA list */
+#define TWIM_RXD_LIST_LIST_ArrayList (1UL) /*!< Use array list */
+
+/* Register: TWIM_TXD_PTR */
+/* Description: Data pointer */
+
+/* Bits 31..0 : Data pointer */
+#define TWIM_TXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define TWIM_TXD_PTR_PTR_Msk (0xFFFFFFFFUL << TWIM_TXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: TWIM_TXD_MAXCNT */
+/* Description: Maximum number of bytes in transmit buffer */
+
+/* Bits 7..0 : Maximum number of bytes in transmit buffer */
+#define TWIM_TXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define TWIM_TXD_MAXCNT_MAXCNT_Msk (0xFFUL << TWIM_TXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: TWIM_TXD_AMOUNT */
+/* Description: Number of bytes transferred in the last transaction */
+
+/* Bits 7..0 : Number of bytes transferred in the last transaction. In case of NACK error, includes the NACK'ed byte. */
+#define TWIM_TXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
+#define TWIM_TXD_AMOUNT_AMOUNT_Msk (0xFFUL << TWIM_TXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
+
+/* Register: TWIM_TXD_LIST */
+/* Description: EasyDMA list type */
+
+/* Bits 2..0 : List type */
+#define TWIM_TXD_LIST_LIST_Pos (0UL) /*!< Position of LIST field. */
+#define TWIM_TXD_LIST_LIST_Msk (0x7UL << TWIM_TXD_LIST_LIST_Pos) /*!< Bit mask of LIST field. */
+#define TWIM_TXD_LIST_LIST_Disabled (0UL) /*!< Disable EasyDMA list */
+#define TWIM_TXD_LIST_LIST_ArrayList (1UL) /*!< Use array list */
+
+/* Register: TWIM_ADDRESS */
+/* Description: Address used in the TWI transfer */
+
+/* Bits 6..0 : Address used in the TWI transfer */
+#define TWIM_ADDRESS_ADDRESS_Pos (0UL) /*!< Position of ADDRESS field. */
+#define TWIM_ADDRESS_ADDRESS_Msk (0x7FUL << TWIM_ADDRESS_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */
+
+
+/* Peripheral: TWIS */
+/* Description: I2C compatible Two-Wire Slave Interface with EasyDMA 0 */
+
+/* Register: TWIS_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 14 : Shortcut between READ event and SUSPEND task */
+#define TWIS_SHORTS_READ_SUSPEND_Pos (14UL) /*!< Position of READ_SUSPEND field. */
+#define TWIS_SHORTS_READ_SUSPEND_Msk (0x1UL << TWIS_SHORTS_READ_SUSPEND_Pos) /*!< Bit mask of READ_SUSPEND field. */
+#define TWIS_SHORTS_READ_SUSPEND_Disabled (0UL) /*!< Disable shortcut */
+#define TWIS_SHORTS_READ_SUSPEND_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 13 : Shortcut between WRITE event and SUSPEND task */
+#define TWIS_SHORTS_WRITE_SUSPEND_Pos (13UL) /*!< Position of WRITE_SUSPEND field. */
+#define TWIS_SHORTS_WRITE_SUSPEND_Msk (0x1UL << TWIS_SHORTS_WRITE_SUSPEND_Pos) /*!< Bit mask of WRITE_SUSPEND field. */
+#define TWIS_SHORTS_WRITE_SUSPEND_Disabled (0UL) /*!< Disable shortcut */
+#define TWIS_SHORTS_WRITE_SUSPEND_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: TWIS_INTEN */
+/* Description: Enable or disable interrupt */
+
+/* Bit 26 : Enable or disable interrupt for READ event */
+#define TWIS_INTEN_READ_Pos (26UL) /*!< Position of READ field. */
+#define TWIS_INTEN_READ_Msk (0x1UL << TWIS_INTEN_READ_Pos) /*!< Bit mask of READ field. */
+#define TWIS_INTEN_READ_Disabled (0UL) /*!< Disable */
+#define TWIS_INTEN_READ_Enabled (1UL) /*!< Enable */
+
+/* Bit 25 : Enable or disable interrupt for WRITE event */
+#define TWIS_INTEN_WRITE_Pos (25UL) /*!< Position of WRITE field. */
+#define TWIS_INTEN_WRITE_Msk (0x1UL << TWIS_INTEN_WRITE_Pos) /*!< Bit mask of WRITE field. */
+#define TWIS_INTEN_WRITE_Disabled (0UL) /*!< Disable */
+#define TWIS_INTEN_WRITE_Enabled (1UL) /*!< Enable */
+
+/* Bit 20 : Enable or disable interrupt for TXSTARTED event */
+#define TWIS_INTEN_TXSTARTED_Pos (20UL) /*!< Position of TXSTARTED field. */
+#define TWIS_INTEN_TXSTARTED_Msk (0x1UL << TWIS_INTEN_TXSTARTED_Pos) /*!< Bit mask of TXSTARTED field. */
+#define TWIS_INTEN_TXSTARTED_Disabled (0UL) /*!< Disable */
+#define TWIS_INTEN_TXSTARTED_Enabled (1UL) /*!< Enable */
+
+/* Bit 19 : Enable or disable interrupt for RXSTARTED event */
+#define TWIS_INTEN_RXSTARTED_Pos (19UL) /*!< Position of RXSTARTED field. */
+#define TWIS_INTEN_RXSTARTED_Msk (0x1UL << TWIS_INTEN_RXSTARTED_Pos) /*!< Bit mask of RXSTARTED field. */
+#define TWIS_INTEN_RXSTARTED_Disabled (0UL) /*!< Disable */
+#define TWIS_INTEN_RXSTARTED_Enabled (1UL) /*!< Enable */
+
+/* Bit 9 : Enable or disable interrupt for ERROR event */
+#define TWIS_INTEN_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define TWIS_INTEN_ERROR_Msk (0x1UL << TWIS_INTEN_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define TWIS_INTEN_ERROR_Disabled (0UL) /*!< Disable */
+#define TWIS_INTEN_ERROR_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable interrupt for STOPPED event */
+#define TWIS_INTEN_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define TWIS_INTEN_STOPPED_Msk (0x1UL << TWIS_INTEN_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define TWIS_INTEN_STOPPED_Disabled (0UL) /*!< Disable */
+#define TWIS_INTEN_STOPPED_Enabled (1UL) /*!< Enable */
+
+/* Register: TWIS_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 26 : Write '1' to Enable interrupt for READ event */
+#define TWIS_INTENSET_READ_Pos (26UL) /*!< Position of READ field. */
+#define TWIS_INTENSET_READ_Msk (0x1UL << TWIS_INTENSET_READ_Pos) /*!< Bit mask of READ field. */
+#define TWIS_INTENSET_READ_Disabled (0UL) /*!< Read: Disabled */
+#define TWIS_INTENSET_READ_Enabled (1UL) /*!< Read: Enabled */
+#define TWIS_INTENSET_READ_Set (1UL) /*!< Enable */
+
+/* Bit 25 : Write '1' to Enable interrupt for WRITE event */
+#define TWIS_INTENSET_WRITE_Pos (25UL) /*!< Position of WRITE field. */
+#define TWIS_INTENSET_WRITE_Msk (0x1UL << TWIS_INTENSET_WRITE_Pos) /*!< Bit mask of WRITE field. */
+#define TWIS_INTENSET_WRITE_Disabled (0UL) /*!< Read: Disabled */
+#define TWIS_INTENSET_WRITE_Enabled (1UL) /*!< Read: Enabled */
+#define TWIS_INTENSET_WRITE_Set (1UL) /*!< Enable */
+
+/* Bit 20 : Write '1' to Enable interrupt for TXSTARTED event */
+#define TWIS_INTENSET_TXSTARTED_Pos (20UL) /*!< Position of TXSTARTED field. */
+#define TWIS_INTENSET_TXSTARTED_Msk (0x1UL << TWIS_INTENSET_TXSTARTED_Pos) /*!< Bit mask of TXSTARTED field. */
+#define TWIS_INTENSET_TXSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIS_INTENSET_TXSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIS_INTENSET_TXSTARTED_Set (1UL) /*!< Enable */
+
+/* Bit 19 : Write '1' to Enable interrupt for RXSTARTED event */
+#define TWIS_INTENSET_RXSTARTED_Pos (19UL) /*!< Position of RXSTARTED field. */
+#define TWIS_INTENSET_RXSTARTED_Msk (0x1UL << TWIS_INTENSET_RXSTARTED_Pos) /*!< Bit mask of RXSTARTED field. */
+#define TWIS_INTENSET_RXSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIS_INTENSET_RXSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIS_INTENSET_RXSTARTED_Set (1UL) /*!< Enable */
+
+/* Bit 9 : Write '1' to Enable interrupt for ERROR event */
+#define TWIS_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define TWIS_INTENSET_ERROR_Msk (0x1UL << TWIS_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define TWIS_INTENSET_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define TWIS_INTENSET_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define TWIS_INTENSET_ERROR_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for STOPPED event */
+#define TWIS_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define TWIS_INTENSET_STOPPED_Msk (0x1UL << TWIS_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define TWIS_INTENSET_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIS_INTENSET_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIS_INTENSET_STOPPED_Set (1UL) /*!< Enable */
+
+/* Register: TWIS_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 26 : Write '1' to Disable interrupt for READ event */
+#define TWIS_INTENCLR_READ_Pos (26UL) /*!< Position of READ field. */
+#define TWIS_INTENCLR_READ_Msk (0x1UL << TWIS_INTENCLR_READ_Pos) /*!< Bit mask of READ field. */
+#define TWIS_INTENCLR_READ_Disabled (0UL) /*!< Read: Disabled */
+#define TWIS_INTENCLR_READ_Enabled (1UL) /*!< Read: Enabled */
+#define TWIS_INTENCLR_READ_Clear (1UL) /*!< Disable */
+
+/* Bit 25 : Write '1' to Disable interrupt for WRITE event */
+#define TWIS_INTENCLR_WRITE_Pos (25UL) /*!< Position of WRITE field. */
+#define TWIS_INTENCLR_WRITE_Msk (0x1UL << TWIS_INTENCLR_WRITE_Pos) /*!< Bit mask of WRITE field. */
+#define TWIS_INTENCLR_WRITE_Disabled (0UL) /*!< Read: Disabled */
+#define TWIS_INTENCLR_WRITE_Enabled (1UL) /*!< Read: Enabled */
+#define TWIS_INTENCLR_WRITE_Clear (1UL) /*!< Disable */
+
+/* Bit 20 : Write '1' to Disable interrupt for TXSTARTED event */
+#define TWIS_INTENCLR_TXSTARTED_Pos (20UL) /*!< Position of TXSTARTED field. */
+#define TWIS_INTENCLR_TXSTARTED_Msk (0x1UL << TWIS_INTENCLR_TXSTARTED_Pos) /*!< Bit mask of TXSTARTED field. */
+#define TWIS_INTENCLR_TXSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIS_INTENCLR_TXSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIS_INTENCLR_TXSTARTED_Clear (1UL) /*!< Disable */
+
+/* Bit 19 : Write '1' to Disable interrupt for RXSTARTED event */
+#define TWIS_INTENCLR_RXSTARTED_Pos (19UL) /*!< Position of RXSTARTED field. */
+#define TWIS_INTENCLR_RXSTARTED_Msk (0x1UL << TWIS_INTENCLR_RXSTARTED_Pos) /*!< Bit mask of RXSTARTED field. */
+#define TWIS_INTENCLR_RXSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIS_INTENCLR_RXSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIS_INTENCLR_RXSTARTED_Clear (1UL) /*!< Disable */
+
+/* Bit 9 : Write '1' to Disable interrupt for ERROR event */
+#define TWIS_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define TWIS_INTENCLR_ERROR_Msk (0x1UL << TWIS_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define TWIS_INTENCLR_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define TWIS_INTENCLR_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define TWIS_INTENCLR_ERROR_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for STOPPED event */
+#define TWIS_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define TWIS_INTENCLR_STOPPED_Msk (0x1UL << TWIS_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define TWIS_INTENCLR_STOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define TWIS_INTENCLR_STOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define TWIS_INTENCLR_STOPPED_Clear (1UL) /*!< Disable */
+
+/* Register: TWIS_ERRORSRC */
+/* Description: Error source */
+
+/* Bit 3 : TX buffer over-read detected, and prevented */
+#define TWIS_ERRORSRC_OVERREAD_Pos (3UL) /*!< Position of OVERREAD field. */
+#define TWIS_ERRORSRC_OVERREAD_Msk (0x1UL << TWIS_ERRORSRC_OVERREAD_Pos) /*!< Bit mask of OVERREAD field. */
+#define TWIS_ERRORSRC_OVERREAD_NotDetected (0UL) /*!< Error did not occur */
+#define TWIS_ERRORSRC_OVERREAD_Detected (1UL) /*!< Error occurred */
+
+/* Bit 2 : NACK sent after receiving a data byte */
+#define TWIS_ERRORSRC_DNACK_Pos (2UL) /*!< Position of DNACK field. */
+#define TWIS_ERRORSRC_DNACK_Msk (0x1UL << TWIS_ERRORSRC_DNACK_Pos) /*!< Bit mask of DNACK field. */
+#define TWIS_ERRORSRC_DNACK_NotReceived (0UL) /*!< Error did not occur */
+#define TWIS_ERRORSRC_DNACK_Received (1UL) /*!< Error occurred */
+
+/* Bit 0 : RX buffer overflow detected, and prevented */
+#define TWIS_ERRORSRC_OVERFLOW_Pos (0UL) /*!< Position of OVERFLOW field. */
+#define TWIS_ERRORSRC_OVERFLOW_Msk (0x1UL << TWIS_ERRORSRC_OVERFLOW_Pos) /*!< Bit mask of OVERFLOW field. */
+#define TWIS_ERRORSRC_OVERFLOW_NotDetected (0UL) /*!< Error did not occur */
+#define TWIS_ERRORSRC_OVERFLOW_Detected (1UL) /*!< Error occurred */
+
+/* Register: TWIS_MATCH */
+/* Description: Status register indicating which address had a match */
+
+/* Bit 0 : Which of the addresses in {ADDRESS} matched the incoming address */
+#define TWIS_MATCH_MATCH_Pos (0UL) /*!< Position of MATCH field. */
+#define TWIS_MATCH_MATCH_Msk (0x1UL << TWIS_MATCH_MATCH_Pos) /*!< Bit mask of MATCH field. */
+
+/* Register: TWIS_ENABLE */
+/* Description: Enable TWIS */
+
+/* Bits 3..0 : Enable or disable TWIS */
+#define TWIS_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define TWIS_ENABLE_ENABLE_Msk (0xFUL << TWIS_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define TWIS_ENABLE_ENABLE_Disabled (0UL) /*!< Disable TWIS */
+#define TWIS_ENABLE_ENABLE_Enabled (9UL) /*!< Enable TWIS */
+
+/* Register: TWIS_PSEL_SCL */
+/* Description: Pin select for SCL signal */
+
+/* Bit 31 : Connection */
+#define TWIS_PSEL_SCL_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define TWIS_PSEL_SCL_CONNECT_Msk (0x1UL << TWIS_PSEL_SCL_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define TWIS_PSEL_SCL_CONNECT_Connected (0UL) /*!< Connect */
+#define TWIS_PSEL_SCL_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define TWIS_PSEL_SCL_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define TWIS_PSEL_SCL_PIN_Msk (0x1FUL << TWIS_PSEL_SCL_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: TWIS_PSEL_SDA */
+/* Description: Pin select for SDA signal */
+
+/* Bit 31 : Connection */
+#define TWIS_PSEL_SDA_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define TWIS_PSEL_SDA_CONNECT_Msk (0x1UL << TWIS_PSEL_SDA_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define TWIS_PSEL_SDA_CONNECT_Connected (0UL) /*!< Connect */
+#define TWIS_PSEL_SDA_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define TWIS_PSEL_SDA_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define TWIS_PSEL_SDA_PIN_Msk (0x1FUL << TWIS_PSEL_SDA_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: TWIS_RXD_PTR */
+/* Description: RXD Data pointer */
+
+/* Bits 31..0 : RXD Data pointer */
+#define TWIS_RXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define TWIS_RXD_PTR_PTR_Msk (0xFFFFFFFFUL << TWIS_RXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: TWIS_RXD_MAXCNT */
+/* Description: Maximum number of bytes in RXD buffer */
+
+/* Bits 7..0 : Maximum number of bytes in RXD buffer */
+#define TWIS_RXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define TWIS_RXD_MAXCNT_MAXCNT_Msk (0xFFUL << TWIS_RXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: TWIS_RXD_AMOUNT */
+/* Description: Number of bytes transferred in the last RXD transaction */
+
+/* Bits 7..0 : Number of bytes transferred in the last RXD transaction */
+#define TWIS_RXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
+#define TWIS_RXD_AMOUNT_AMOUNT_Msk (0xFFUL << TWIS_RXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
+
+/* Register: TWIS_TXD_PTR */
+/* Description: TXD Data pointer */
+
+/* Bits 31..0 : TXD Data pointer */
+#define TWIS_TXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define TWIS_TXD_PTR_PTR_Msk (0xFFFFFFFFUL << TWIS_TXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: TWIS_TXD_MAXCNT */
+/* Description: Maximum number of bytes in TXD buffer */
+
+/* Bits 7..0 : Maximum number of bytes in TXD buffer */
+#define TWIS_TXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define TWIS_TXD_MAXCNT_MAXCNT_Msk (0xFFUL << TWIS_TXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: TWIS_TXD_AMOUNT */
+/* Description: Number of bytes transferred in the last TXD transaction */
+
+/* Bits 7..0 : Number of bytes transferred in the last TXD transaction */
+#define TWIS_TXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
+#define TWIS_TXD_AMOUNT_AMOUNT_Msk (0xFFUL << TWIS_TXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
+
+/* Register: TWIS_ADDRESS */
+/* Description: Description collection[0]: TWI slave address 0 */
+
+/* Bits 6..0 : TWI slave address */
+#define TWIS_ADDRESS_ADDRESS_Pos (0UL) /*!< Position of ADDRESS field. */
+#define TWIS_ADDRESS_ADDRESS_Msk (0x7FUL << TWIS_ADDRESS_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */
+
+/* Register: TWIS_CONFIG */
+/* Description: Configuration register for the address match mechanism */
+
+/* Bit 1 : Enable or disable address matching on ADDRESS[1] */
+#define TWIS_CONFIG_ADDRESS1_Pos (1UL) /*!< Position of ADDRESS1 field. */
+#define TWIS_CONFIG_ADDRESS1_Msk (0x1UL << TWIS_CONFIG_ADDRESS1_Pos) /*!< Bit mask of ADDRESS1 field. */
+#define TWIS_CONFIG_ADDRESS1_Disabled (0UL) /*!< Disabled */
+#define TWIS_CONFIG_ADDRESS1_Enabled (1UL) /*!< Enabled */
+
+/* Bit 0 : Enable or disable address matching on ADDRESS[0] */
+#define TWIS_CONFIG_ADDRESS0_Pos (0UL) /*!< Position of ADDRESS0 field. */
+#define TWIS_CONFIG_ADDRESS0_Msk (0x1UL << TWIS_CONFIG_ADDRESS0_Pos) /*!< Bit mask of ADDRESS0 field. */
+#define TWIS_CONFIG_ADDRESS0_Disabled (0UL) /*!< Disabled */
+#define TWIS_CONFIG_ADDRESS0_Enabled (1UL) /*!< Enabled */
+
+/* Register: TWIS_ORC */
+/* Description: Over-read character. Character sent out in case of an over-read of the transmit buffer. */
+
+/* Bits 7..0 : Over-read character. Character sent out in case of an over-read of the transmit buffer. */
+#define TWIS_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */
+#define TWIS_ORC_ORC_Msk (0xFFUL << TWIS_ORC_ORC_Pos) /*!< Bit mask of ORC field. */
+
+
+/* Peripheral: UART */
+/* Description: Universal Asynchronous Receiver/Transmitter */
+
+/* Register: UART_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 4 : Shortcut between NCTS event and STOPRX task */
+#define UART_SHORTS_NCTS_STOPRX_Pos (4UL) /*!< Position of NCTS_STOPRX field. */
+#define UART_SHORTS_NCTS_STOPRX_Msk (0x1UL << UART_SHORTS_NCTS_STOPRX_Pos) /*!< Bit mask of NCTS_STOPRX field. */
+#define UART_SHORTS_NCTS_STOPRX_Disabled (0UL) /*!< Disable shortcut */
+#define UART_SHORTS_NCTS_STOPRX_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 3 : Shortcut between CTS event and STARTRX task */
+#define UART_SHORTS_CTS_STARTRX_Pos (3UL) /*!< Position of CTS_STARTRX field. */
+#define UART_SHORTS_CTS_STARTRX_Msk (0x1UL << UART_SHORTS_CTS_STARTRX_Pos) /*!< Bit mask of CTS_STARTRX field. */
+#define UART_SHORTS_CTS_STARTRX_Disabled (0UL) /*!< Disable shortcut */
+#define UART_SHORTS_CTS_STARTRX_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: UART_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 17 : Write '1' to Enable interrupt for RXTO event */
+#define UART_INTENSET_RXTO_Pos (17UL) /*!< Position of RXTO field. */
+#define UART_INTENSET_RXTO_Msk (0x1UL << UART_INTENSET_RXTO_Pos) /*!< Bit mask of RXTO field. */
+#define UART_INTENSET_RXTO_Disabled (0UL) /*!< Read: Disabled */
+#define UART_INTENSET_RXTO_Enabled (1UL) /*!< Read: Enabled */
+#define UART_INTENSET_RXTO_Set (1UL) /*!< Enable */
+
+/* Bit 9 : Write '1' to Enable interrupt for ERROR event */
+#define UART_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define UART_INTENSET_ERROR_Msk (0x1UL << UART_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define UART_INTENSET_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define UART_INTENSET_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define UART_INTENSET_ERROR_Set (1UL) /*!< Enable */
+
+/* Bit 7 : Write '1' to Enable interrupt for TXDRDY event */
+#define UART_INTENSET_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */
+#define UART_INTENSET_TXDRDY_Msk (0x1UL << UART_INTENSET_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */
+#define UART_INTENSET_TXDRDY_Disabled (0UL) /*!< Read: Disabled */
+#define UART_INTENSET_TXDRDY_Enabled (1UL) /*!< Read: Enabled */
+#define UART_INTENSET_TXDRDY_Set (1UL) /*!< Enable */
+
+/* Bit 2 : Write '1' to Enable interrupt for RXDRDY event */
+#define UART_INTENSET_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */
+#define UART_INTENSET_RXDRDY_Msk (0x1UL << UART_INTENSET_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */
+#define UART_INTENSET_RXDRDY_Disabled (0UL) /*!< Read: Disabled */
+#define UART_INTENSET_RXDRDY_Enabled (1UL) /*!< Read: Enabled */
+#define UART_INTENSET_RXDRDY_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for NCTS event */
+#define UART_INTENSET_NCTS_Pos (1UL) /*!< Position of NCTS field. */
+#define UART_INTENSET_NCTS_Msk (0x1UL << UART_INTENSET_NCTS_Pos) /*!< Bit mask of NCTS field. */
+#define UART_INTENSET_NCTS_Disabled (0UL) /*!< Read: Disabled */
+#define UART_INTENSET_NCTS_Enabled (1UL) /*!< Read: Enabled */
+#define UART_INTENSET_NCTS_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for CTS event */
+#define UART_INTENSET_CTS_Pos (0UL) /*!< Position of CTS field. */
+#define UART_INTENSET_CTS_Msk (0x1UL << UART_INTENSET_CTS_Pos) /*!< Bit mask of CTS field. */
+#define UART_INTENSET_CTS_Disabled (0UL) /*!< Read: Disabled */
+#define UART_INTENSET_CTS_Enabled (1UL) /*!< Read: Enabled */
+#define UART_INTENSET_CTS_Set (1UL) /*!< Enable */
+
+/* Register: UART_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 17 : Write '1' to Disable interrupt for RXTO event */
+#define UART_INTENCLR_RXTO_Pos (17UL) /*!< Position of RXTO field. */
+#define UART_INTENCLR_RXTO_Msk (0x1UL << UART_INTENCLR_RXTO_Pos) /*!< Bit mask of RXTO field. */
+#define UART_INTENCLR_RXTO_Disabled (0UL) /*!< Read: Disabled */
+#define UART_INTENCLR_RXTO_Enabled (1UL) /*!< Read: Enabled */
+#define UART_INTENCLR_RXTO_Clear (1UL) /*!< Disable */
+
+/* Bit 9 : Write '1' to Disable interrupt for ERROR event */
+#define UART_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define UART_INTENCLR_ERROR_Msk (0x1UL << UART_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define UART_INTENCLR_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define UART_INTENCLR_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define UART_INTENCLR_ERROR_Clear (1UL) /*!< Disable */
+
+/* Bit 7 : Write '1' to Disable interrupt for TXDRDY event */
+#define UART_INTENCLR_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */
+#define UART_INTENCLR_TXDRDY_Msk (0x1UL << UART_INTENCLR_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */
+#define UART_INTENCLR_TXDRDY_Disabled (0UL) /*!< Read: Disabled */
+#define UART_INTENCLR_TXDRDY_Enabled (1UL) /*!< Read: Enabled */
+#define UART_INTENCLR_TXDRDY_Clear (1UL) /*!< Disable */
+
+/* Bit 2 : Write '1' to Disable interrupt for RXDRDY event */
+#define UART_INTENCLR_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */
+#define UART_INTENCLR_RXDRDY_Msk (0x1UL << UART_INTENCLR_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */
+#define UART_INTENCLR_RXDRDY_Disabled (0UL) /*!< Read: Disabled */
+#define UART_INTENCLR_RXDRDY_Enabled (1UL) /*!< Read: Enabled */
+#define UART_INTENCLR_RXDRDY_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for NCTS event */
+#define UART_INTENCLR_NCTS_Pos (1UL) /*!< Position of NCTS field. */
+#define UART_INTENCLR_NCTS_Msk (0x1UL << UART_INTENCLR_NCTS_Pos) /*!< Bit mask of NCTS field. */
+#define UART_INTENCLR_NCTS_Disabled (0UL) /*!< Read: Disabled */
+#define UART_INTENCLR_NCTS_Enabled (1UL) /*!< Read: Enabled */
+#define UART_INTENCLR_NCTS_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for CTS event */
+#define UART_INTENCLR_CTS_Pos (0UL) /*!< Position of CTS field. */
+#define UART_INTENCLR_CTS_Msk (0x1UL << UART_INTENCLR_CTS_Pos) /*!< Bit mask of CTS field. */
+#define UART_INTENCLR_CTS_Disabled (0UL) /*!< Read: Disabled */
+#define UART_INTENCLR_CTS_Enabled (1UL) /*!< Read: Enabled */
+#define UART_INTENCLR_CTS_Clear (1UL) /*!< Disable */
+
+/* Register: UART_ERRORSRC */
+/* Description: Error source */
+
+/* Bit 3 : Break condition */
+#define UART_ERRORSRC_BREAK_Pos (3UL) /*!< Position of BREAK field. */
+#define UART_ERRORSRC_BREAK_Msk (0x1UL << UART_ERRORSRC_BREAK_Pos) /*!< Bit mask of BREAK field. */
+#define UART_ERRORSRC_BREAK_NotPresent (0UL) /*!< Read: error not present */
+#define UART_ERRORSRC_BREAK_Present (1UL) /*!< Read: error present */
+
+/* Bit 2 : Framing error occurred */
+#define UART_ERRORSRC_FRAMING_Pos (2UL) /*!< Position of FRAMING field. */
+#define UART_ERRORSRC_FRAMING_Msk (0x1UL << UART_ERRORSRC_FRAMING_Pos) /*!< Bit mask of FRAMING field. */
+#define UART_ERRORSRC_FRAMING_NotPresent (0UL) /*!< Read: error not present */
+#define UART_ERRORSRC_FRAMING_Present (1UL) /*!< Read: error present */
+
+/* Bit 1 : Parity error */
+#define UART_ERRORSRC_PARITY_Pos (1UL) /*!< Position of PARITY field. */
+#define UART_ERRORSRC_PARITY_Msk (0x1UL << UART_ERRORSRC_PARITY_Pos) /*!< Bit mask of PARITY field. */
+#define UART_ERRORSRC_PARITY_NotPresent (0UL) /*!< Read: error not present */
+#define UART_ERRORSRC_PARITY_Present (1UL) /*!< Read: error present */
+
+/* Bit 0 : Overrun error */
+#define UART_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */
+#define UART_ERRORSRC_OVERRUN_Msk (0x1UL << UART_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */
+#define UART_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Read: error not present */
+#define UART_ERRORSRC_OVERRUN_Present (1UL) /*!< Read: error present */
+
+/* Register: UART_ENABLE */
+/* Description: Enable UART */
+
+/* Bits 3..0 : Enable or disable UART */
+#define UART_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define UART_ENABLE_ENABLE_Msk (0xFUL << UART_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define UART_ENABLE_ENABLE_Disabled (0UL) /*!< Disable UART */
+#define UART_ENABLE_ENABLE_Enabled (4UL) /*!< Enable UART */
+
+/* Register: UART_PSELRTS */
+/* Description: Pin select for RTS */
+
+/* Bits 31..0 : Pin number configuration for UART RTS signal */
+#define UART_PSELRTS_PSELRTS_Pos (0UL) /*!< Position of PSELRTS field. */
+#define UART_PSELRTS_PSELRTS_Msk (0xFFFFFFFFUL << UART_PSELRTS_PSELRTS_Pos) /*!< Bit mask of PSELRTS field. */
+#define UART_PSELRTS_PSELRTS_Disconnected (0xFFFFFFFFUL) /*!< Disconnect */
+
+/* Register: UART_PSELTXD */
+/* Description: Pin select for TXD */
+
+/* Bits 31..0 : Pin number configuration for UART TXD signal */
+#define UART_PSELTXD_PSELTXD_Pos (0UL) /*!< Position of PSELTXD field. */
+#define UART_PSELTXD_PSELTXD_Msk (0xFFFFFFFFUL << UART_PSELTXD_PSELTXD_Pos) /*!< Bit mask of PSELTXD field. */
+#define UART_PSELTXD_PSELTXD_Disconnected (0xFFFFFFFFUL) /*!< Disconnect */
+
+/* Register: UART_PSELCTS */
+/* Description: Pin select for CTS */
+
+/* Bits 31..0 : Pin number configuration for UART CTS signal */
+#define UART_PSELCTS_PSELCTS_Pos (0UL) /*!< Position of PSELCTS field. */
+#define UART_PSELCTS_PSELCTS_Msk (0xFFFFFFFFUL << UART_PSELCTS_PSELCTS_Pos) /*!< Bit mask of PSELCTS field. */
+#define UART_PSELCTS_PSELCTS_Disconnected (0xFFFFFFFFUL) /*!< Disconnect */
+
+/* Register: UART_PSELRXD */
+/* Description: Pin select for RXD */
+
+/* Bits 31..0 : Pin number configuration for UART RXD signal */
+#define UART_PSELRXD_PSELRXD_Pos (0UL) /*!< Position of PSELRXD field. */
+#define UART_PSELRXD_PSELRXD_Msk (0xFFFFFFFFUL << UART_PSELRXD_PSELRXD_Pos) /*!< Bit mask of PSELRXD field. */
+#define UART_PSELRXD_PSELRXD_Disconnected (0xFFFFFFFFUL) /*!< Disconnect */
+
+/* Register: UART_RXD */
+/* Description: RXD register */
+
+/* Bits 7..0 : RX data received in previous transfers, double buffered */
+#define UART_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */
+#define UART_RXD_RXD_Msk (0xFFUL << UART_RXD_RXD_Pos) /*!< Bit mask of RXD field. */
+
+/* Register: UART_TXD */
+/* Description: TXD register */
+
+/* Bits 7..0 : TX data to be transferred */
+#define UART_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */
+#define UART_TXD_TXD_Msk (0xFFUL << UART_TXD_TXD_Pos) /*!< Bit mask of TXD field. */
+
+/* Register: UART_BAUDRATE */
+/* Description: Baud rate */
+
+/* Bits 31..0 : Baud-rate */
+#define UART_BAUDRATE_BAUDRATE_Pos (0UL) /*!< Position of BAUDRATE field. */
+#define UART_BAUDRATE_BAUDRATE_Msk (0xFFFFFFFFUL << UART_BAUDRATE_BAUDRATE_Pos) /*!< Bit mask of BAUDRATE field. */
+#define UART_BAUDRATE_BAUDRATE_Baud1200 (0x0004F000UL) /*!< 1200 baud (actual rate: 1205) */
+#define UART_BAUDRATE_BAUDRATE_Baud2400 (0x0009D000UL) /*!< 2400 baud (actual rate: 2396) */
+#define UART_BAUDRATE_BAUDRATE_Baud4800 (0x0013B000UL) /*!< 4800 baud (actual rate: 4808) */
+#define UART_BAUDRATE_BAUDRATE_Baud9600 (0x00275000UL) /*!< 9600 baud (actual rate: 9598) */
+#define UART_BAUDRATE_BAUDRATE_Baud14400 (0x003B0000UL) /*!< 14400 baud (actual rate: 14414) */
+#define UART_BAUDRATE_BAUDRATE_Baud19200 (0x004EA000UL) /*!< 19200 baud (actual rate: 19208) */
+#define UART_BAUDRATE_BAUDRATE_Baud28800 (0x0075F000UL) /*!< 28800 baud (actual rate: 28829) */
+#define UART_BAUDRATE_BAUDRATE_Baud38400 (0x009D5000UL) /*!< 38400 baud (actual rate: 38462) */
+#define UART_BAUDRATE_BAUDRATE_Baud57600 (0x00EBF000UL) /*!< 57600 baud (actual rate: 57762) */
+#define UART_BAUDRATE_BAUDRATE_Baud76800 (0x013A9000UL) /*!< 76800 baud (actual rate: 76923) */
+#define UART_BAUDRATE_BAUDRATE_Baud115200 (0x01D7E000UL) /*!< 115200 baud (actual rate: 115942) */
+#define UART_BAUDRATE_BAUDRATE_Baud230400 (0x03AFB000UL) /*!< 230400 baud (actual rate: 231884) */
+#define UART_BAUDRATE_BAUDRATE_Baud250000 (0x04000000UL) /*!< 250000 baud */
+#define UART_BAUDRATE_BAUDRATE_Baud460800 (0x075F7000UL) /*!< 460800 baud (actual rate: 470588) */
+#define UART_BAUDRATE_BAUDRATE_Baud921600 (0x0EBED000UL) /*!< 921600 baud (actual rate: 941176) */
+#define UART_BAUDRATE_BAUDRATE_Baud1M (0x10000000UL) /*!< 1Mega baud */
+
+/* Register: UART_CONFIG */
+/* Description: Configuration of parity and hardware flow control */
+
+/* Bits 3..1 : Parity */
+#define UART_CONFIG_PARITY_Pos (1UL) /*!< Position of PARITY field. */
+#define UART_CONFIG_PARITY_Msk (0x7UL << UART_CONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */
+#define UART_CONFIG_PARITY_Excluded (0x0UL) /*!< Exclude parity bit */
+#define UART_CONFIG_PARITY_Included (0x7UL) /*!< Include parity bit */
+
+/* Bit 0 : Hardware flow control */
+#define UART_CONFIG_HWFC_Pos (0UL) /*!< Position of HWFC field. */
+#define UART_CONFIG_HWFC_Msk (0x1UL << UART_CONFIG_HWFC_Pos) /*!< Bit mask of HWFC field. */
+#define UART_CONFIG_HWFC_Disabled (0UL) /*!< Disabled */
+#define UART_CONFIG_HWFC_Enabled (1UL) /*!< Enabled */
+
+
+/* Peripheral: UARTE */
+/* Description: UART with EasyDMA */
+
+/* Register: UARTE_SHORTS */
+/* Description: Shortcut register */
+
+/* Bit 6 : Shortcut between ENDRX event and STOPRX task */
+#define UARTE_SHORTS_ENDRX_STOPRX_Pos (6UL) /*!< Position of ENDRX_STOPRX field. */
+#define UARTE_SHORTS_ENDRX_STOPRX_Msk (0x1UL << UARTE_SHORTS_ENDRX_STOPRX_Pos) /*!< Bit mask of ENDRX_STOPRX field. */
+#define UARTE_SHORTS_ENDRX_STOPRX_Disabled (0UL) /*!< Disable shortcut */
+#define UARTE_SHORTS_ENDRX_STOPRX_Enabled (1UL) /*!< Enable shortcut */
+
+/* Bit 5 : Shortcut between ENDRX event and STARTRX task */
+#define UARTE_SHORTS_ENDRX_STARTRX_Pos (5UL) /*!< Position of ENDRX_STARTRX field. */
+#define UARTE_SHORTS_ENDRX_STARTRX_Msk (0x1UL << UARTE_SHORTS_ENDRX_STARTRX_Pos) /*!< Bit mask of ENDRX_STARTRX field. */
+#define UARTE_SHORTS_ENDRX_STARTRX_Disabled (0UL) /*!< Disable shortcut */
+#define UARTE_SHORTS_ENDRX_STARTRX_Enabled (1UL) /*!< Enable shortcut */
+
+/* Register: UARTE_INTEN */
+/* Description: Enable or disable interrupt */
+
+/* Bit 22 : Enable or disable interrupt for TXSTOPPED event */
+#define UARTE_INTEN_TXSTOPPED_Pos (22UL) /*!< Position of TXSTOPPED field. */
+#define UARTE_INTEN_TXSTOPPED_Msk (0x1UL << UARTE_INTEN_TXSTOPPED_Pos) /*!< Bit mask of TXSTOPPED field. */
+#define UARTE_INTEN_TXSTOPPED_Disabled (0UL) /*!< Disable */
+#define UARTE_INTEN_TXSTOPPED_Enabled (1UL) /*!< Enable */
+
+/* Bit 20 : Enable or disable interrupt for TXSTARTED event */
+#define UARTE_INTEN_TXSTARTED_Pos (20UL) /*!< Position of TXSTARTED field. */
+#define UARTE_INTEN_TXSTARTED_Msk (0x1UL << UARTE_INTEN_TXSTARTED_Pos) /*!< Bit mask of TXSTARTED field. */
+#define UARTE_INTEN_TXSTARTED_Disabled (0UL) /*!< Disable */
+#define UARTE_INTEN_TXSTARTED_Enabled (1UL) /*!< Enable */
+
+/* Bit 19 : Enable or disable interrupt for RXSTARTED event */
+#define UARTE_INTEN_RXSTARTED_Pos (19UL) /*!< Position of RXSTARTED field. */
+#define UARTE_INTEN_RXSTARTED_Msk (0x1UL << UARTE_INTEN_RXSTARTED_Pos) /*!< Bit mask of RXSTARTED field. */
+#define UARTE_INTEN_RXSTARTED_Disabled (0UL) /*!< Disable */
+#define UARTE_INTEN_RXSTARTED_Enabled (1UL) /*!< Enable */
+
+/* Bit 17 : Enable or disable interrupt for RXTO event */
+#define UARTE_INTEN_RXTO_Pos (17UL) /*!< Position of RXTO field. */
+#define UARTE_INTEN_RXTO_Msk (0x1UL << UARTE_INTEN_RXTO_Pos) /*!< Bit mask of RXTO field. */
+#define UARTE_INTEN_RXTO_Disabled (0UL) /*!< Disable */
+#define UARTE_INTEN_RXTO_Enabled (1UL) /*!< Enable */
+
+/* Bit 9 : Enable or disable interrupt for ERROR event */
+#define UARTE_INTEN_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define UARTE_INTEN_ERROR_Msk (0x1UL << UARTE_INTEN_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define UARTE_INTEN_ERROR_Disabled (0UL) /*!< Disable */
+#define UARTE_INTEN_ERROR_Enabled (1UL) /*!< Enable */
+
+/* Bit 8 : Enable or disable interrupt for ENDTX event */
+#define UARTE_INTEN_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */
+#define UARTE_INTEN_ENDTX_Msk (0x1UL << UARTE_INTEN_ENDTX_Pos) /*!< Bit mask of ENDTX field. */
+#define UARTE_INTEN_ENDTX_Disabled (0UL) /*!< Disable */
+#define UARTE_INTEN_ENDTX_Enabled (1UL) /*!< Enable */
+
+/* Bit 4 : Enable or disable interrupt for ENDRX event */
+#define UARTE_INTEN_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
+#define UARTE_INTEN_ENDRX_Msk (0x1UL << UARTE_INTEN_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define UARTE_INTEN_ENDRX_Disabled (0UL) /*!< Disable */
+#define UARTE_INTEN_ENDRX_Enabled (1UL) /*!< Enable */
+
+/* Bit 1 : Enable or disable interrupt for NCTS event */
+#define UARTE_INTEN_NCTS_Pos (1UL) /*!< Position of NCTS field. */
+#define UARTE_INTEN_NCTS_Msk (0x1UL << UARTE_INTEN_NCTS_Pos) /*!< Bit mask of NCTS field. */
+#define UARTE_INTEN_NCTS_Disabled (0UL) /*!< Disable */
+#define UARTE_INTEN_NCTS_Enabled (1UL) /*!< Enable */
+
+/* Bit 0 : Enable or disable interrupt for CTS event */
+#define UARTE_INTEN_CTS_Pos (0UL) /*!< Position of CTS field. */
+#define UARTE_INTEN_CTS_Msk (0x1UL << UARTE_INTEN_CTS_Pos) /*!< Bit mask of CTS field. */
+#define UARTE_INTEN_CTS_Disabled (0UL) /*!< Disable */
+#define UARTE_INTEN_CTS_Enabled (1UL) /*!< Enable */
+
+/* Register: UARTE_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 22 : Write '1' to Enable interrupt for TXSTOPPED event */
+#define UARTE_INTENSET_TXSTOPPED_Pos (22UL) /*!< Position of TXSTOPPED field. */
+#define UARTE_INTENSET_TXSTOPPED_Msk (0x1UL << UARTE_INTENSET_TXSTOPPED_Pos) /*!< Bit mask of TXSTOPPED field. */
+#define UARTE_INTENSET_TXSTOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENSET_TXSTOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENSET_TXSTOPPED_Set (1UL) /*!< Enable */
+
+/* Bit 20 : Write '1' to Enable interrupt for TXSTARTED event */
+#define UARTE_INTENSET_TXSTARTED_Pos (20UL) /*!< Position of TXSTARTED field. */
+#define UARTE_INTENSET_TXSTARTED_Msk (0x1UL << UARTE_INTENSET_TXSTARTED_Pos) /*!< Bit mask of TXSTARTED field. */
+#define UARTE_INTENSET_TXSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENSET_TXSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENSET_TXSTARTED_Set (1UL) /*!< Enable */
+
+/* Bit 19 : Write '1' to Enable interrupt for RXSTARTED event */
+#define UARTE_INTENSET_RXSTARTED_Pos (19UL) /*!< Position of RXSTARTED field. */
+#define UARTE_INTENSET_RXSTARTED_Msk (0x1UL << UARTE_INTENSET_RXSTARTED_Pos) /*!< Bit mask of RXSTARTED field. */
+#define UARTE_INTENSET_RXSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENSET_RXSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENSET_RXSTARTED_Set (1UL) /*!< Enable */
+
+/* Bit 17 : Write '1' to Enable interrupt for RXTO event */
+#define UARTE_INTENSET_RXTO_Pos (17UL) /*!< Position of RXTO field. */
+#define UARTE_INTENSET_RXTO_Msk (0x1UL << UARTE_INTENSET_RXTO_Pos) /*!< Bit mask of RXTO field. */
+#define UARTE_INTENSET_RXTO_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENSET_RXTO_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENSET_RXTO_Set (1UL) /*!< Enable */
+
+/* Bit 9 : Write '1' to Enable interrupt for ERROR event */
+#define UARTE_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define UARTE_INTENSET_ERROR_Msk (0x1UL << UARTE_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define UARTE_INTENSET_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENSET_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENSET_ERROR_Set (1UL) /*!< Enable */
+
+/* Bit 8 : Write '1' to Enable interrupt for ENDTX event */
+#define UARTE_INTENSET_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */
+#define UARTE_INTENSET_ENDTX_Msk (0x1UL << UARTE_INTENSET_ENDTX_Pos) /*!< Bit mask of ENDTX field. */
+#define UARTE_INTENSET_ENDTX_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENSET_ENDTX_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENSET_ENDTX_Set (1UL) /*!< Enable */
+
+/* Bit 4 : Write '1' to Enable interrupt for ENDRX event */
+#define UARTE_INTENSET_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
+#define UARTE_INTENSET_ENDRX_Msk (0x1UL << UARTE_INTENSET_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define UARTE_INTENSET_ENDRX_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENSET_ENDRX_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENSET_ENDRX_Set (1UL) /*!< Enable */
+
+/* Bit 1 : Write '1' to Enable interrupt for NCTS event */
+#define UARTE_INTENSET_NCTS_Pos (1UL) /*!< Position of NCTS field. */
+#define UARTE_INTENSET_NCTS_Msk (0x1UL << UARTE_INTENSET_NCTS_Pos) /*!< Bit mask of NCTS field. */
+#define UARTE_INTENSET_NCTS_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENSET_NCTS_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENSET_NCTS_Set (1UL) /*!< Enable */
+
+/* Bit 0 : Write '1' to Enable interrupt for CTS event */
+#define UARTE_INTENSET_CTS_Pos (0UL) /*!< Position of CTS field. */
+#define UARTE_INTENSET_CTS_Msk (0x1UL << UARTE_INTENSET_CTS_Pos) /*!< Bit mask of CTS field. */
+#define UARTE_INTENSET_CTS_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENSET_CTS_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENSET_CTS_Set (1UL) /*!< Enable */
+
+/* Register: UARTE_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 22 : Write '1' to Disable interrupt for TXSTOPPED event */
+#define UARTE_INTENCLR_TXSTOPPED_Pos (22UL) /*!< Position of TXSTOPPED field. */
+#define UARTE_INTENCLR_TXSTOPPED_Msk (0x1UL << UARTE_INTENCLR_TXSTOPPED_Pos) /*!< Bit mask of TXSTOPPED field. */
+#define UARTE_INTENCLR_TXSTOPPED_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENCLR_TXSTOPPED_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENCLR_TXSTOPPED_Clear (1UL) /*!< Disable */
+
+/* Bit 20 : Write '1' to Disable interrupt for TXSTARTED event */
+#define UARTE_INTENCLR_TXSTARTED_Pos (20UL) /*!< Position of TXSTARTED field. */
+#define UARTE_INTENCLR_TXSTARTED_Msk (0x1UL << UARTE_INTENCLR_TXSTARTED_Pos) /*!< Bit mask of TXSTARTED field. */
+#define UARTE_INTENCLR_TXSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENCLR_TXSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENCLR_TXSTARTED_Clear (1UL) /*!< Disable */
+
+/* Bit 19 : Write '1' to Disable interrupt for RXSTARTED event */
+#define UARTE_INTENCLR_RXSTARTED_Pos (19UL) /*!< Position of RXSTARTED field. */
+#define UARTE_INTENCLR_RXSTARTED_Msk (0x1UL << UARTE_INTENCLR_RXSTARTED_Pos) /*!< Bit mask of RXSTARTED field. */
+#define UARTE_INTENCLR_RXSTARTED_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENCLR_RXSTARTED_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENCLR_RXSTARTED_Clear (1UL) /*!< Disable */
+
+/* Bit 17 : Write '1' to Disable interrupt for RXTO event */
+#define UARTE_INTENCLR_RXTO_Pos (17UL) /*!< Position of RXTO field. */
+#define UARTE_INTENCLR_RXTO_Msk (0x1UL << UARTE_INTENCLR_RXTO_Pos) /*!< Bit mask of RXTO field. */
+#define UARTE_INTENCLR_RXTO_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENCLR_RXTO_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENCLR_RXTO_Clear (1UL) /*!< Disable */
+
+/* Bit 9 : Write '1' to Disable interrupt for ERROR event */
+#define UARTE_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define UARTE_INTENCLR_ERROR_Msk (0x1UL << UARTE_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define UARTE_INTENCLR_ERROR_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENCLR_ERROR_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENCLR_ERROR_Clear (1UL) /*!< Disable */
+
+/* Bit 8 : Write '1' to Disable interrupt for ENDTX event */
+#define UARTE_INTENCLR_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */
+#define UARTE_INTENCLR_ENDTX_Msk (0x1UL << UARTE_INTENCLR_ENDTX_Pos) /*!< Bit mask of ENDTX field. */
+#define UARTE_INTENCLR_ENDTX_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENCLR_ENDTX_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENCLR_ENDTX_Clear (1UL) /*!< Disable */
+
+/* Bit 4 : Write '1' to Disable interrupt for ENDRX event */
+#define UARTE_INTENCLR_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */
+#define UARTE_INTENCLR_ENDRX_Msk (0x1UL << UARTE_INTENCLR_ENDRX_Pos) /*!< Bit mask of ENDRX field. */
+#define UARTE_INTENCLR_ENDRX_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENCLR_ENDRX_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENCLR_ENDRX_Clear (1UL) /*!< Disable */
+
+/* Bit 1 : Write '1' to Disable interrupt for NCTS event */
+#define UARTE_INTENCLR_NCTS_Pos (1UL) /*!< Position of NCTS field. */
+#define UARTE_INTENCLR_NCTS_Msk (0x1UL << UARTE_INTENCLR_NCTS_Pos) /*!< Bit mask of NCTS field. */
+#define UARTE_INTENCLR_NCTS_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENCLR_NCTS_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENCLR_NCTS_Clear (1UL) /*!< Disable */
+
+/* Bit 0 : Write '1' to Disable interrupt for CTS event */
+#define UARTE_INTENCLR_CTS_Pos (0UL) /*!< Position of CTS field. */
+#define UARTE_INTENCLR_CTS_Msk (0x1UL << UARTE_INTENCLR_CTS_Pos) /*!< Bit mask of CTS field. */
+#define UARTE_INTENCLR_CTS_Disabled (0UL) /*!< Read: Disabled */
+#define UARTE_INTENCLR_CTS_Enabled (1UL) /*!< Read: Enabled */
+#define UARTE_INTENCLR_CTS_Clear (1UL) /*!< Disable */
+
+/* Register: UARTE_ERRORSRC */
+/* Description: Error source */
+
+/* Bit 3 : Break condition */
+#define UARTE_ERRORSRC_BREAK_Pos (3UL) /*!< Position of BREAK field. */
+#define UARTE_ERRORSRC_BREAK_Msk (0x1UL << UARTE_ERRORSRC_BREAK_Pos) /*!< Bit mask of BREAK field. */
+#define UARTE_ERRORSRC_BREAK_NotPresent (0UL) /*!< Read: error not present */
+#define UARTE_ERRORSRC_BREAK_Present (1UL) /*!< Read: error present */
+
+/* Bit 2 : Framing error occurred */
+#define UARTE_ERRORSRC_FRAMING_Pos (2UL) /*!< Position of FRAMING field. */
+#define UARTE_ERRORSRC_FRAMING_Msk (0x1UL << UARTE_ERRORSRC_FRAMING_Pos) /*!< Bit mask of FRAMING field. */
+#define UARTE_ERRORSRC_FRAMING_NotPresent (0UL) /*!< Read: error not present */
+#define UARTE_ERRORSRC_FRAMING_Present (1UL) /*!< Read: error present */
+
+/* Bit 1 : Parity error */
+#define UARTE_ERRORSRC_PARITY_Pos (1UL) /*!< Position of PARITY field. */
+#define UARTE_ERRORSRC_PARITY_Msk (0x1UL << UARTE_ERRORSRC_PARITY_Pos) /*!< Bit mask of PARITY field. */
+#define UARTE_ERRORSRC_PARITY_NotPresent (0UL) /*!< Read: error not present */
+#define UARTE_ERRORSRC_PARITY_Present (1UL) /*!< Read: error present */
+
+/* Bit 0 : Overrun error */
+#define UARTE_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */
+#define UARTE_ERRORSRC_OVERRUN_Msk (0x1UL << UARTE_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */
+#define UARTE_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Read: error not present */
+#define UARTE_ERRORSRC_OVERRUN_Present (1UL) /*!< Read: error present */
+
+/* Register: UARTE_ENABLE */
+/* Description: Enable UART */
+
+/* Bits 3..0 : Enable or disable UARTE */
+#define UARTE_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define UARTE_ENABLE_ENABLE_Msk (0xFUL << UARTE_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define UARTE_ENABLE_ENABLE_Disabled (0UL) /*!< Disable UARTE */
+#define UARTE_ENABLE_ENABLE_Enabled (8UL) /*!< Enable UARTE */
+
+/* Register: UARTE_PSEL_RTS */
+/* Description: Pin select for RTS signal */
+
+/* Bit 31 : Connection */
+#define UARTE_PSEL_RTS_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define UARTE_PSEL_RTS_CONNECT_Msk (0x1UL << UARTE_PSEL_RTS_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define UARTE_PSEL_RTS_CONNECT_Connected (0UL) /*!< Connect */
+#define UARTE_PSEL_RTS_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define UARTE_PSEL_RTS_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define UARTE_PSEL_RTS_PIN_Msk (0x1FUL << UARTE_PSEL_RTS_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: UARTE_PSEL_TXD */
+/* Description: Pin select for TXD signal */
+
+/* Bit 31 : Connection */
+#define UARTE_PSEL_TXD_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define UARTE_PSEL_TXD_CONNECT_Msk (0x1UL << UARTE_PSEL_TXD_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define UARTE_PSEL_TXD_CONNECT_Connected (0UL) /*!< Connect */
+#define UARTE_PSEL_TXD_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define UARTE_PSEL_TXD_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define UARTE_PSEL_TXD_PIN_Msk (0x1FUL << UARTE_PSEL_TXD_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: UARTE_PSEL_CTS */
+/* Description: Pin select for CTS signal */
+
+/* Bit 31 : Connection */
+#define UARTE_PSEL_CTS_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define UARTE_PSEL_CTS_CONNECT_Msk (0x1UL << UARTE_PSEL_CTS_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define UARTE_PSEL_CTS_CONNECT_Connected (0UL) /*!< Connect */
+#define UARTE_PSEL_CTS_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define UARTE_PSEL_CTS_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define UARTE_PSEL_CTS_PIN_Msk (0x1FUL << UARTE_PSEL_CTS_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: UARTE_PSEL_RXD */
+/* Description: Pin select for RXD signal */
+
+/* Bit 31 : Connection */
+#define UARTE_PSEL_RXD_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define UARTE_PSEL_RXD_CONNECT_Msk (0x1UL << UARTE_PSEL_RXD_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define UARTE_PSEL_RXD_CONNECT_Connected (0UL) /*!< Connect */
+#define UARTE_PSEL_RXD_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : Pin number */
+#define UARTE_PSEL_RXD_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define UARTE_PSEL_RXD_PIN_Msk (0x1FUL << UARTE_PSEL_RXD_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: UARTE_BAUDRATE */
+/* Description: Baud rate */
+
+/* Bits 31..0 : Baud-rate */
+#define UARTE_BAUDRATE_BAUDRATE_Pos (0UL) /*!< Position of BAUDRATE field. */
+#define UARTE_BAUDRATE_BAUDRATE_Msk (0xFFFFFFFFUL << UARTE_BAUDRATE_BAUDRATE_Pos) /*!< Bit mask of BAUDRATE field. */
+#define UARTE_BAUDRATE_BAUDRATE_Baud1200 (0x0004F000UL) /*!< 1200 baud (actual rate: 1205) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud2400 (0x0009D000UL) /*!< 2400 baud (actual rate: 2396) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud4800 (0x0013B000UL) /*!< 4800 baud (actual rate: 4808) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud9600 (0x00275000UL) /*!< 9600 baud (actual rate: 9598) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud14400 (0x003AF000UL) /*!< 14400 baud (actual rate: 14401) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud19200 (0x004EA000UL) /*!< 19200 baud (actual rate: 19208) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud28800 (0x0075C000UL) /*!< 28800 baud (actual rate: 28777) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud38400 (0x009D0000UL) /*!< 38400 baud (actual rate: 38369) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud57600 (0x00EB0000UL) /*!< 57600 baud (actual rate: 57554) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud76800 (0x013A9000UL) /*!< 76800 baud (actual rate: 76923) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud115200 (0x01D60000UL) /*!< 115200 baud (actual rate: 115108) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud230400 (0x03B00000UL) /*!< 230400 baud (actual rate: 231884) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud250000 (0x04000000UL) /*!< 250000 baud */
+#define UARTE_BAUDRATE_BAUDRATE_Baud460800 (0x07400000UL) /*!< 460800 baud (actual rate: 457143) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud921600 (0x0F000000UL) /*!< 921600 baud (actual rate: 941176) */
+#define UARTE_BAUDRATE_BAUDRATE_Baud1M (0x10000000UL) /*!< 1Mega baud */
+
+/* Register: UARTE_RXD_PTR */
+/* Description: Data pointer */
+
+/* Bits 31..0 : Data pointer */
+#define UARTE_RXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define UARTE_RXD_PTR_PTR_Msk (0xFFFFFFFFUL << UARTE_RXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: UARTE_RXD_MAXCNT */
+/* Description: Maximum number of bytes in receive buffer */
+
+/* Bits 7..0 : Maximum number of bytes in receive buffer */
+#define UARTE_RXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define UARTE_RXD_MAXCNT_MAXCNT_Msk (0xFFUL << UARTE_RXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: UARTE_RXD_AMOUNT */
+/* Description: Number of bytes transferred in the last transaction */
+
+/* Bits 7..0 : Number of bytes transferred in the last transaction */
+#define UARTE_RXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
+#define UARTE_RXD_AMOUNT_AMOUNT_Msk (0xFFUL << UARTE_RXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
+
+/* Register: UARTE_TXD_PTR */
+/* Description: Data pointer */
+
+/* Bits 31..0 : Data pointer */
+#define UARTE_TXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */
+#define UARTE_TXD_PTR_PTR_Msk (0xFFFFFFFFUL << UARTE_TXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */
+
+/* Register: UARTE_TXD_MAXCNT */
+/* Description: Maximum number of bytes in transmit buffer */
+
+/* Bits 7..0 : Maximum number of bytes in transmit buffer */
+#define UARTE_TXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */
+#define UARTE_TXD_MAXCNT_MAXCNT_Msk (0xFFUL << UARTE_TXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */
+
+/* Register: UARTE_TXD_AMOUNT */
+/* Description: Number of bytes transferred in the last transaction */
+
+/* Bits 7..0 : Number of bytes transferred in the last transaction */
+#define UARTE_TXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */
+#define UARTE_TXD_AMOUNT_AMOUNT_Msk (0xFFUL << UARTE_TXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */
+
+/* Register: UARTE_CONFIG */
+/* Description: Configuration of parity and hardware flow control */
+
+/* Bits 3..1 : Parity */
+#define UARTE_CONFIG_PARITY_Pos (1UL) /*!< Position of PARITY field. */
+#define UARTE_CONFIG_PARITY_Msk (0x7UL << UARTE_CONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */
+#define UARTE_CONFIG_PARITY_Excluded (0x0UL) /*!< Exclude parity bit */
+#define UARTE_CONFIG_PARITY_Included (0x7UL) /*!< Include parity bit */
+
+/* Bit 0 : Hardware flow control */
+#define UARTE_CONFIG_HWFC_Pos (0UL) /*!< Position of HWFC field. */
+#define UARTE_CONFIG_HWFC_Msk (0x1UL << UARTE_CONFIG_HWFC_Pos) /*!< Bit mask of HWFC field. */
+#define UARTE_CONFIG_HWFC_Disabled (0UL) /*!< Disabled */
+#define UARTE_CONFIG_HWFC_Enabled (1UL) /*!< Enabled */
+
+
+/* Peripheral: UICR */
+/* Description: User Information Configuration Registers */
+
+/* Register: UICR_NRFFW */
+/* Description: Description collection[0]: Reserved for Nordic firmware design */
+
+/* Bits 31..0 : Reserved for Nordic firmware design */
+#define UICR_NRFFW_NRFFW_Pos (0UL) /*!< Position of NRFFW field. */
+#define UICR_NRFFW_NRFFW_Msk (0xFFFFFFFFUL << UICR_NRFFW_NRFFW_Pos) /*!< Bit mask of NRFFW field. */
+
+/* Register: UICR_NRFHW */
+/* Description: Description collection[0]: Reserved for Nordic hardware design */
+
+/* Bits 31..0 : Reserved for Nordic hardware design */
+#define UICR_NRFHW_NRFHW_Pos (0UL) /*!< Position of NRFHW field. */
+#define UICR_NRFHW_NRFHW_Msk (0xFFFFFFFFUL << UICR_NRFHW_NRFHW_Pos) /*!< Bit mask of NRFHW field. */
+
+/* Register: UICR_CUSTOMER */
+/* Description: Description collection[0]: Reserved for customer */
+
+/* Bits 31..0 : Reserved for customer */
+#define UICR_CUSTOMER_CUSTOMER_Pos (0UL) /*!< Position of CUSTOMER field. */
+#define UICR_CUSTOMER_CUSTOMER_Msk (0xFFFFFFFFUL << UICR_CUSTOMER_CUSTOMER_Pos) /*!< Bit mask of CUSTOMER field. */
+
+/* Register: UICR_PSELRESET */
+/* Description: Description collection[0]: Mapping of the nRESET function (see POWER chapter for details) */
+
+/* Bit 31 : Connection */
+#define UICR_PSELRESET_CONNECT_Pos (31UL) /*!< Position of CONNECT field. */
+#define UICR_PSELRESET_CONNECT_Msk (0x1UL << UICR_PSELRESET_CONNECT_Pos) /*!< Bit mask of CONNECT field. */
+#define UICR_PSELRESET_CONNECT_Connected (0UL) /*!< Connect */
+#define UICR_PSELRESET_CONNECT_Disconnected (1UL) /*!< Disconnect */
+
+/* Bits 4..0 : GPIO number P0.n onto which Reset is exposed */
+#define UICR_PSELRESET_PIN_Pos (0UL) /*!< Position of PIN field. */
+#define UICR_PSELRESET_PIN_Msk (0x1FUL << UICR_PSELRESET_PIN_Pos) /*!< Bit mask of PIN field. */
+
+/* Register: UICR_APPROTECT */
+/* Description: Access Port protection */
+
+/* Bits 7..0 : Enable or disable Access Port protection. */
+#define UICR_APPROTECT_PALL_Pos (0UL) /*!< Position of PALL field. */
+#define UICR_APPROTECT_PALL_Msk (0xFFUL << UICR_APPROTECT_PALL_Pos) /*!< Bit mask of PALL field. */
+#define UICR_APPROTECT_PALL_Enabled (0x00UL) /*!< Enable */
+#define UICR_APPROTECT_PALL_Disabled (0xFFUL) /*!< Disable */
+
+/* Register: UICR_NFCPINS */
+/* Description: Setting of pins dedicated to NFC functionality: NFC antenna or GPIO */
+
+/* Bit 0 : Setting of pins dedicated to NFC functionality */
+#define UICR_NFCPINS_PROTECT_Pos (0UL) /*!< Position of PROTECT field. */
+#define UICR_NFCPINS_PROTECT_Msk (0x1UL << UICR_NFCPINS_PROTECT_Pos) /*!< Bit mask of PROTECT field. */
+#define UICR_NFCPINS_PROTECT_Disabled (0UL) /*!< Operation as GPIO pins. Same protection as normal GPIO pins */
+#define UICR_NFCPINS_PROTECT_NFC (1UL) /*!< Operation as NFC antenna pins. Configures the protection for NFC operation */
+
+
+/* Peripheral: WDT */
+/* Description: Watchdog Timer */
+
+/* Register: WDT_INTENSET */
+/* Description: Enable interrupt */
+
+/* Bit 0 : Write '1' to Enable interrupt for TIMEOUT event */
+#define WDT_INTENSET_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */
+#define WDT_INTENSET_TIMEOUT_Msk (0x1UL << WDT_INTENSET_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */
+#define WDT_INTENSET_TIMEOUT_Disabled (0UL) /*!< Read: Disabled */
+#define WDT_INTENSET_TIMEOUT_Enabled (1UL) /*!< Read: Enabled */
+#define WDT_INTENSET_TIMEOUT_Set (1UL) /*!< Enable */
+
+/* Register: WDT_INTENCLR */
+/* Description: Disable interrupt */
+
+/* Bit 0 : Write '1' to Disable interrupt for TIMEOUT event */
+#define WDT_INTENCLR_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */
+#define WDT_INTENCLR_TIMEOUT_Msk (0x1UL << WDT_INTENCLR_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */
+#define WDT_INTENCLR_TIMEOUT_Disabled (0UL) /*!< Read: Disabled */
+#define WDT_INTENCLR_TIMEOUT_Enabled (1UL) /*!< Read: Enabled */
+#define WDT_INTENCLR_TIMEOUT_Clear (1UL) /*!< Disable */
+
+/* Register: WDT_RUNSTATUS */
+/* Description: Run status */
+
+/* Bit 0 : Indicates whether or not the watchdog is running */
+#define WDT_RUNSTATUS_RUNSTATUS_Pos (0UL) /*!< Position of RUNSTATUS field. */
+#define WDT_RUNSTATUS_RUNSTATUS_Msk (0x1UL << WDT_RUNSTATUS_RUNSTATUS_Pos) /*!< Bit mask of RUNSTATUS field. */
+#define WDT_RUNSTATUS_RUNSTATUS_NotRunning (0UL) /*!< Watchdog not running */
+#define WDT_RUNSTATUS_RUNSTATUS_Running (1UL) /*!< Watchdog is running */
+
+/* Register: WDT_REQSTATUS */
+/* Description: Request status */
+
+/* Bit 7 : Request status for RR[7] register */
+#define WDT_REQSTATUS_RR7_Pos (7UL) /*!< Position of RR7 field. */
+#define WDT_REQSTATUS_RR7_Msk (0x1UL << WDT_REQSTATUS_RR7_Pos) /*!< Bit mask of RR7 field. */
+#define WDT_REQSTATUS_RR7_DisabledOrRequested (0UL) /*!< RR[7] register is not enabled, or are already requesting reload */
+#define WDT_REQSTATUS_RR7_EnabledAndUnrequested (1UL) /*!< RR[7] register is enabled, and are not yet requesting reload */
+
+/* Bit 6 : Request status for RR[6] register */
+#define WDT_REQSTATUS_RR6_Pos (6UL) /*!< Position of RR6 field. */
+#define WDT_REQSTATUS_RR6_Msk (0x1UL << WDT_REQSTATUS_RR6_Pos) /*!< Bit mask of RR6 field. */
+#define WDT_REQSTATUS_RR6_DisabledOrRequested (0UL) /*!< RR[6] register is not enabled, or are already requesting reload */
+#define WDT_REQSTATUS_RR6_EnabledAndUnrequested (1UL) /*!< RR[6] register is enabled, and are not yet requesting reload */
+
+/* Bit 5 : Request status for RR[5] register */
+#define WDT_REQSTATUS_RR5_Pos (5UL) /*!< Position of RR5 field. */
+#define WDT_REQSTATUS_RR5_Msk (0x1UL << WDT_REQSTATUS_RR5_Pos) /*!< Bit mask of RR5 field. */
+#define WDT_REQSTATUS_RR5_DisabledOrRequested (0UL) /*!< RR[5] register is not enabled, or are already requesting reload */
+#define WDT_REQSTATUS_RR5_EnabledAndUnrequested (1UL) /*!< RR[5] register is enabled, and are not yet requesting reload */
+
+/* Bit 4 : Request status for RR[4] register */
+#define WDT_REQSTATUS_RR4_Pos (4UL) /*!< Position of RR4 field. */
+#define WDT_REQSTATUS_RR4_Msk (0x1UL << WDT_REQSTATUS_RR4_Pos) /*!< Bit mask of RR4 field. */
+#define WDT_REQSTATUS_RR4_DisabledOrRequested (0UL) /*!< RR[4] register is not enabled, or are already requesting reload */
+#define WDT_REQSTATUS_RR4_EnabledAndUnrequested (1UL) /*!< RR[4] register is enabled, and are not yet requesting reload */
+
+/* Bit 3 : Request status for RR[3] register */
+#define WDT_REQSTATUS_RR3_Pos (3UL) /*!< Position of RR3 field. */
+#define WDT_REQSTATUS_RR3_Msk (0x1UL << WDT_REQSTATUS_RR3_Pos) /*!< Bit mask of RR3 field. */
+#define WDT_REQSTATUS_RR3_DisabledOrRequested (0UL) /*!< RR[3] register is not enabled, or are already requesting reload */
+#define WDT_REQSTATUS_RR3_EnabledAndUnrequested (1UL) /*!< RR[3] register is enabled, and are not yet requesting reload */
+
+/* Bit 2 : Request status for RR[2] register */
+#define WDT_REQSTATUS_RR2_Pos (2UL) /*!< Position of RR2 field. */
+#define WDT_REQSTATUS_RR2_Msk (0x1UL << WDT_REQSTATUS_RR2_Pos) /*!< Bit mask of RR2 field. */
+#define WDT_REQSTATUS_RR2_DisabledOrRequested (0UL) /*!< RR[2] register is not enabled, or are already requesting reload */
+#define WDT_REQSTATUS_RR2_EnabledAndUnrequested (1UL) /*!< RR[2] register is enabled, and are not yet requesting reload */
+
+/* Bit 1 : Request status for RR[1] register */
+#define WDT_REQSTATUS_RR1_Pos (1UL) /*!< Position of RR1 field. */
+#define WDT_REQSTATUS_RR1_Msk (0x1UL << WDT_REQSTATUS_RR1_Pos) /*!< Bit mask of RR1 field. */
+#define WDT_REQSTATUS_RR1_DisabledOrRequested (0UL) /*!< RR[1] register is not enabled, or are already requesting reload */
+#define WDT_REQSTATUS_RR1_EnabledAndUnrequested (1UL) /*!< RR[1] register is enabled, and are not yet requesting reload */
+
+/* Bit 0 : Request status for RR[0] register */
+#define WDT_REQSTATUS_RR0_Pos (0UL) /*!< Position of RR0 field. */
+#define WDT_REQSTATUS_RR0_Msk (0x1UL << WDT_REQSTATUS_RR0_Pos) /*!< Bit mask of RR0 field. */
+#define WDT_REQSTATUS_RR0_DisabledOrRequested (0UL) /*!< RR[0] register is not enabled, or are already requesting reload */
+#define WDT_REQSTATUS_RR0_EnabledAndUnrequested (1UL) /*!< RR[0] register is enabled, and are not yet requesting reload */
+
+/* Register: WDT_CRV */
+/* Description: Counter reload value */
+
+/* Bits 31..0 : Counter reload value in number of cycles of the 32.768 kHz clock */
+#define WDT_CRV_CRV_Pos (0UL) /*!< Position of CRV field. */
+#define WDT_CRV_CRV_Msk (0xFFFFFFFFUL << WDT_CRV_CRV_Pos) /*!< Bit mask of CRV field. */
+
+/* Register: WDT_RREN */
+/* Description: Enable register for reload request registers */
+
+/* Bit 7 : Enable or disable RR[7] register */
+#define WDT_RREN_RR7_Pos (7UL) /*!< Position of RR7 field. */
+#define WDT_RREN_RR7_Msk (0x1UL << WDT_RREN_RR7_Pos) /*!< Bit mask of RR7 field. */
+#define WDT_RREN_RR7_Disabled (0UL) /*!< Disable RR[7] register */
+#define WDT_RREN_RR7_Enabled (1UL) /*!< Enable RR[7] register */
+
+/* Bit 6 : Enable or disable RR[6] register */
+#define WDT_RREN_RR6_Pos (6UL) /*!< Position of RR6 field. */
+#define WDT_RREN_RR6_Msk (0x1UL << WDT_RREN_RR6_Pos) /*!< Bit mask of RR6 field. */
+#define WDT_RREN_RR6_Disabled (0UL) /*!< Disable RR[6] register */
+#define WDT_RREN_RR6_Enabled (1UL) /*!< Enable RR[6] register */
+
+/* Bit 5 : Enable or disable RR[5] register */
+#define WDT_RREN_RR5_Pos (5UL) /*!< Position of RR5 field. */
+#define WDT_RREN_RR5_Msk (0x1UL << WDT_RREN_RR5_Pos) /*!< Bit mask of RR5 field. */
+#define WDT_RREN_RR5_Disabled (0UL) /*!< Disable RR[5] register */
+#define WDT_RREN_RR5_Enabled (1UL) /*!< Enable RR[5] register */
+
+/* Bit 4 : Enable or disable RR[4] register */
+#define WDT_RREN_RR4_Pos (4UL) /*!< Position of RR4 field. */
+#define WDT_RREN_RR4_Msk (0x1UL << WDT_RREN_RR4_Pos) /*!< Bit mask of RR4 field. */
+#define WDT_RREN_RR4_Disabled (0UL) /*!< Disable RR[4] register */
+#define WDT_RREN_RR4_Enabled (1UL) /*!< Enable RR[4] register */
+
+/* Bit 3 : Enable or disable RR[3] register */
+#define WDT_RREN_RR3_Pos (3UL) /*!< Position of RR3 field. */
+#define WDT_RREN_RR3_Msk (0x1UL << WDT_RREN_RR3_Pos) /*!< Bit mask of RR3 field. */
+#define WDT_RREN_RR3_Disabled (0UL) /*!< Disable RR[3] register */
+#define WDT_RREN_RR3_Enabled (1UL) /*!< Enable RR[3] register */
+
+/* Bit 2 : Enable or disable RR[2] register */
+#define WDT_RREN_RR2_Pos (2UL) /*!< Position of RR2 field. */
+#define WDT_RREN_RR2_Msk (0x1UL << WDT_RREN_RR2_Pos) /*!< Bit mask of RR2 field. */
+#define WDT_RREN_RR2_Disabled (0UL) /*!< Disable RR[2] register */
+#define WDT_RREN_RR2_Enabled (1UL) /*!< Enable RR[2] register */
+
+/* Bit 1 : Enable or disable RR[1] register */
+#define WDT_RREN_RR1_Pos (1UL) /*!< Position of RR1 field. */
+#define WDT_RREN_RR1_Msk (0x1UL << WDT_RREN_RR1_Pos) /*!< Bit mask of RR1 field. */
+#define WDT_RREN_RR1_Disabled (0UL) /*!< Disable RR[1] register */
+#define WDT_RREN_RR1_Enabled (1UL) /*!< Enable RR[1] register */
+
+/* Bit 0 : Enable or disable RR[0] register */
+#define WDT_RREN_RR0_Pos (0UL) /*!< Position of RR0 field. */
+#define WDT_RREN_RR0_Msk (0x1UL << WDT_RREN_RR0_Pos) /*!< Bit mask of RR0 field. */
+#define WDT_RREN_RR0_Disabled (0UL) /*!< Disable RR[0] register */
+#define WDT_RREN_RR0_Enabled (1UL) /*!< Enable RR[0] register */
+
+/* Register: WDT_CONFIG */
+/* Description: Configuration register */
+
+/* Bit 3 : Configure the watchdog to either be paused, or kept running, while the CPU is halted by the debugger */
+#define WDT_CONFIG_HALT_Pos (3UL) /*!< Position of HALT field. */
+#define WDT_CONFIG_HALT_Msk (0x1UL << WDT_CONFIG_HALT_Pos) /*!< Bit mask of HALT field. */
+#define WDT_CONFIG_HALT_Pause (0UL) /*!< Pause watchdog while the CPU is halted by the debugger */
+#define WDT_CONFIG_HALT_Run (1UL) /*!< Keep the watchdog running while the CPU is halted by the debugger */
+
+/* Bit 0 : Configure the watchdog to either be paused, or kept running, while the CPU is sleeping */
+#define WDT_CONFIG_SLEEP_Pos (0UL) /*!< Position of SLEEP field. */
+#define WDT_CONFIG_SLEEP_Msk (0x1UL << WDT_CONFIG_SLEEP_Pos) /*!< Bit mask of SLEEP field. */
+#define WDT_CONFIG_SLEEP_Pause (0UL) /*!< Pause watchdog while the CPU is sleeping */
+#define WDT_CONFIG_SLEEP_Run (1UL) /*!< Keep the watchdog running while the CPU is sleeping */
+
+/* Register: WDT_RR */
+/* Description: Description collection[0]: Reload request 0 */
+
+/* Bits 31..0 : Reload request register */
+#define WDT_RR_RR_Pos (0UL) /*!< Position of RR field. */
+#define WDT_RR_RR_Msk (0xFFFFFFFFUL << WDT_RR_RR_Pos) /*!< Bit mask of RR field. */
+#define WDT_RR_RR_Reload (0x6E524635UL) /*!< Value to request a reload of the watchdog timer */
+
+
+/*lint --flb "Leave library region" */
+#endif
diff --git a/os/hal/ports/NRF5/NRF52832/nrf_delay.h b/os/hal/ports/NRF5/NRF52832/nrf_delay.h new file mode 100644 index 0000000..9b5df64 --- /dev/null +++ b/os/hal/ports/NRF5/NRF52832/nrf_delay.h @@ -0,0 +1,97 @@ +/* + Copyright (C) 2015 Stephen Caudle + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file NRF5/NRF52832/nrf_delay.h + * @brief NRF5 Delay routines + * + * @{ + */ + +#ifndef _NRF_DELAY_H +#define _NRF_DELAY_H + +inline static void nrf_delay_us(uint32_t volatile number_of_us) __attribute__((always_inline)); +inline static void nrf_delay_us(uint32_t volatile number_of_us) +{ +register uint32_t delay __asm ("r0") = number_of_us; +__asm volatile ( +".syntax unified\n" + "1:\n" + " SUBS %0, %0, #1\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " NOP\n" + " BNE 1b\n" + ".syntax divided\n" + : "+r" (delay)); +} +#endif //__NRF_DELAY_H diff --git a/os/hal/ports/NRF5/NRF52832/platform.mk b/os/hal/ports/NRF5/NRF52832/platform.mk new file mode 100644 index 0000000..248027b --- /dev/null +++ b/os/hal/ports/NRF5/NRF52832/platform.mk @@ -0,0 +1,52 @@ +ifeq ($(USE_SMART_BUILD),yes) +HALCONF := $(strip $(shell cat halconf.h halconf_community.h 2>/dev/null | egrep -e "define")) + +# List of all the NRF51x platform files. +PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF52832/hal_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_st_lld.c + +ifneq ($(findstring HAL_USE_PAL TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_pal_lld.c +endif +ifneq ($(findstring HAL_USE_SERIAL TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_serial_lld.c +endif +ifneq ($(findstring HAL_USE_SPI TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_spi_lld.c +endif +ifneq ($(findstring HAL_USE_I2C TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_i2c_lld.c +endif +ifneq ($(findstring HAL_USE_GPT TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_gpt_lld.c +endif +ifneq ($(findstring HAL_USE_WDG TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_wdg_lld.c +endif +ifneq ($(findstring HAL_USE_RNG TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_rng_lld.c +endif +ifneq ($(findstring HAL_USE_QEI TRUE,$(HALCONF)),) +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_qei_lld.c +endif +else +PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF52832/hal_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_pal_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_serial_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_spi_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_i2c_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_st_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_gpt_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_wdg_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_rng_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD/hal_qei_lld.c +endif + +# Required include directories +PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/LLD \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF5/NRF52832 + + diff --git a/os/hal/ports/NRF5/NRF52832/todo.txt b/os/hal/ports/NRF5/NRF52832/todo.txt new file mode 100644 index 0000000..bc6423a --- /dev/null +++ b/os/hal/ports/NRF5/NRF52832/todo.txt @@ -0,0 +1,7 @@ +* add extra RTC, TIMER +* assert size constraints on TIMER +* clarify write-buffer for events handling + https://devzone.nordicsemi.com/question/86564/nrf52-write-buffer/ +* implement pin-reset, swo trace, trace pin configuration +* implement errata (see system_nrf52.c) +* check GPIO DETECTMODE and LATCH diff --git a/os/hal/ports/NRF51/NRF51822/platform.mk b/os/hal/ports/NRF51/NRF51822/platform.mk deleted file mode 100644 index b937e39..0000000 --- a/os/hal/ports/NRF51/NRF51822/platform.mk +++ /dev/null @@ -1,61 +0,0 @@ -ifeq ($(USE_SMART_BUILD),yes) -HALCONF := $(strip $(shell cat halconf.h halconf_community.h 2>/dev/null | egrep -e "define")) - -# List of all the NRF51x platform files. -PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_st_lld.c - -ifneq ($(findstring HAL_USE_PAL TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c -endif -ifneq ($(findstring HAL_USE_SERIAL TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c -endif -ifneq ($(findstring HAL_USE_SPI TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c -endif -ifneq ($(findstring HAL_USE_EXT TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c -endif -ifneq ($(findstring HAL_USE_I2C TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c -endif -ifneq ($(findstring HAL_USE_ADC TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c -endif -ifneq ($(findstring HAL_USE_GPT TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c -endif -ifneq ($(findstring HAL_USE_WDG TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c -endif -ifneq ($(findstring HAL_USE_RNG TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c -endif -ifneq ($(findstring HAL_USE_PWM TRUE,$(HALCONF)),) -PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c -endif -else -PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_pal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_serial_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_st_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_spi_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_ext_lld_isr.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_ext_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_i2c_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_adc_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_gpt_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_wdg_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_rng_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/hal_pwm_lld.c -endif - -# Required include directories -PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822 - - diff --git a/os/hal/ports/STM32/LLD/COMPv1/hal_comp_lld.c b/os/hal/ports/STM32/LLD/COMPv1/hal_comp_lld.c new file mode 100644 index 0000000..62d9f14 --- /dev/null +++ b/os/hal/ports/STM32/LLD/COMPv1/hal_comp_lld.c @@ -0,0 +1,520 @@ +/* + ChibiOS - Copyright (C) 2006..2017 Giovanni Di Sirio + Copyright (C) 2017 Fabien Poussin (fabien.poussin (at) google's mail) + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + + +/** + * @file STM32/hal_comp_lld.c + * @brief STM32 Comp subsystem low level driver header. + * + * @addtogroup COMP + * @{ + */ + +#include "hal.h" + +#if HAL_USE_COMP || defined(__DOXYGEN__) + +#include "hal_comp.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/** + * @brief COMPD1 driver identifier. + * @note The driver COMPD1 allocates the comparator COMP1 when enabled. + */ +#if STM32_COMP_USE_COMP1 || defined(__DOXYGEN__) +COMPDriver COMPD1; +#endif + +/** + * @brief COMPD2 driver identifier. + * @note The driver COMPD2 allocates the comparator COMP2 when enabled. + */ +#if STM32_COMP_USE_COMP2 || defined(__DOXYGEN__) +COMPDriver COMPD2; +#endif + +/** + * @brief COMPD3 driver identifier. + * @note The driver COMPD3 allocates the comparator COMP3 when enabled. + */ +#if STM32_COMP_USE_COMP3 || defined(__DOXYGEN__) +COMPDriver COMPD3; +#endif + +/** + * @brief COMPD4 driver identifier. + * @note The driver COMPD4 allocates the comparator COMP4 when enabled. + */ +#if STM32_COMP_USE_COMP4 || defined(__DOXYGEN__) +COMPDriver COMPD4; +#endif + +/** + * @brief COMPD5 driver identifier. + * @note The driver COMPD5 allocates the comparator COMP5 when enabled. + */ +#if STM32_COMP_USE_COMP5 || defined(__DOXYGEN__) +COMPDriver COMPD5; +#endif + +/** + * @brief COMPD6 driver identifier. + * @note The driver COMPD6 allocates the comparator COMP6 when enabled. + */ +#if STM32_COMP_USE_COMP6 || defined(__DOXYGEN__) +COMPDriver COMPD6; +#endif + +/** + * @brief COMPD7 driver identifier. + * @note The driver COMPD7 allocates the comparator COMP7 when enabled. + */ +#if STM32_COMP_USE_COMP7 || defined(__DOXYGEN__) +COMPDriver COMPD7; +#endif + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/** + * @brief Low level COMP driver initialization. + * + * @notapi + */ +void comp_lld_init(void) { + +#if STM32_COMP_USE_COMP1 + /* Driver initialization.*/ + compObjectInit(&COMPD1); + COMPD1.reg = COMP; + COMPD1.reg->CSR = 0; +#if STM32_COMP_USE_INTERRUPTS + nvicEnableVector(COMP1_2_3_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY); +#endif +#endif + +#if STM32_COMP_USE_COMP2 + /* Driver initialization.*/ + compObjectInit(&COMPD2); + COMPD2.reg = COMP2; + COMPD2.reg->CSR = 0; +#if STM32_COMP_USE_INTERRUPTS + nvicEnableVector(COMP1_2_3_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY); +#endif +#endif + +#if STM32_COMP_USE_COMP3 + /* Driver initialization.*/ + compObjectInit(&COMPD3); + COMPD3.reg = COMP3; + COMPD3.reg->CSR = 0; +#if STM32_COMP_USE_INTERRUPTS + nvicEnableVector(COMP1_2_3_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY); +#endif +#endif + +#if STM32_COMP_USE_COMP4 + /* Driver initialization.*/ + compObjectInit(&COMPD4); + COMPD4.reg = COMP4; + COMPD4.reg->CSR = 0; +#if STM32_COMP_USE_INTERRUPTS + nvicEnableVector(COMP4_5_6_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY); +#endif +#endif + +#if STM32_COMP_USE_COMP5 + /* Driver initialization.*/ + compObjectInit(&COMPD5); + COMPD5.reg = COMP5; + COMPD5.reg->CSR = 0; +#if STM32_COMP_USE_INTERRUPTS + nvicEnableVector(COMP4_5_6_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY); +#endif +#endif + +#if STM32_COMP_USE_COMP6 + /* Driver initialization.*/ + compObjectInit(&COMPD6); + COMPD6.reg = COMP6; + COMPD6.reg->CSR = 0; +#if STM32_COMP_USE_INTERRUPTS + nvicEnableVector(COMP4_5_6_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY); +#endif +#endif + +#if STM32_COMP_USE_COMP7 + /* Driver initialization.*/ + compObjectInit(&COMPD7); + COMPD7.reg = COMP7; + COMPD7.reg->CSR = 0; +#if STM32_COMP_USE_INTERRUPTS + nvicEnableVector(COMP7_IRQn, STM32_COMP_7_IRQ_PRIORITY); +#endif +#endif + +} + +/** + * @brief COMP1, COMP2, COMP3 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(Vector140) { + uint32_t pr; + + OSAL_IRQ_PROLOGUE(); + + pr = EXTI->PR; + pr &= EXTI->IMR & ((1U << 21) | (1U << 22) | (1U << 29)); + EXTI->PR = pr; +#if STM32_COMP_USE_COMP1 + if (pr & (1U << 21) && COMPD1.config->cb != NULL) + COMPD1.config->cb(&COMPD1); +#endif +#if STM32_COMP_USE_COMP2 + if (pr & (1U << 22) && COMPD2.config->cb != NULL) + COMPD2.config->cb(&COMPD2); +#endif +#if STM32_COMP_USE_COMP3 + if (pr & (1U << 29) && COMPD3.config->cb != NULL) + COMPD3.config->cb(&COMPD3); +#endif + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief COMP4, COMP5, COMP6 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(Vector144) { + uint32_t pr; + + OSAL_IRQ_PROLOGUE(); + + pr = EXTI->PR; + pr &= EXTI->IMR & ((1U << 30) | (1U << 31)); + EXTI->PR = pr; +#if STM32_COMP_USE_COMP4 + if (pr & (1U << 30) && COMPD4.config->cb != NULL) + COMPD4.config->cb(&COMPD4); +#endif +#if STM32_COMP_USE_COMP5 + if (pr & (1U << 31) && COMPD5.config->cb != NULL) + COMPD5.config->cb(&COMPD5); +#endif + +#if STM32_COMP_USE_COMP6 + pr = EXTI->PR2 & EXTI->IMR2 & (1U << 0); + EXTI->PR2 = pr; + if (pr & (1U << 0) && COMPD6.config->cb != NULL) + COMPD6.config->cb(&COMPD6); +#endif + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief COMP7 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(Vector148) { + uint32_t pr2; + + OSAL_IRQ_PROLOGUE(); + + pr2 = EXTI->PR2; + pr2 = EXTI->IMR & (1U << 1); + EXTI->PR2 = pr2; +#if STM32_COMP_USE_COMP7 + if (pr2 & (1U << 1) && COMPD7.config->cb != NULL) + COMPD7.config->cb(&COMPD7); +#endif + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief Configures and activates an EXT channel (used by comp) + * + * @param[in] compp pointer to the @p COMPDriver object + * @param[in] channel EXT channel + * + * @notapi + */ +void comp_ext_lld_channel_enable(COMPDriver *compp, uint32_t channel) { + uint32_t cmask = (1 << (channel & 0x1F)); + + /* Don't touch other channels */ + if (channel < 21 || channel > 33) { + return; + } + +#if STM32_EXTI_NUM_LINES > 32 + if (channel < 32) { +#endif + /* Masked out lines must not be touched by this driver.*/ + if ((cmask & STM32_EXTI_IMR_MASK) != 0U) { + return; + } + + /* Programming edge registers.*/ + if (compp->config->irq_mode == COMP_IRQ_RISING || compp->config->irq_mode == COMP_IRQ_BOTH) + EXTI->RTSR |= cmask; + else + EXTI->RTSR &= ~cmask; + if (compp->config->irq_mode == COMP_IRQ_FALLING || compp->config->irq_mode == COMP_IRQ_BOTH) + EXTI->FTSR |= cmask; + else + EXTI->FTSR &= ~cmask; + + /* Programming interrupt and event registers.*/ + EXTI->IMR |= cmask; + EXTI->EMR &= ~cmask; + +#if STM32_EXTI_NUM_LINES > 32 + } + else { + /* Masked out lines must not be touched by this driver.*/ + if ((cmask & STM32_EXTI_IMR2_MASK) != 0U) { + return; + } + + /* Programming edge registers.*/ + if (compp->config->irq_mode == COMP_IRQ_RISING || compp->config->irq_mode == COMP_IRQ_BOTH) + EXTI->RTSR2 |= cmask; + else + EXTI->RTSR2 &= ~cmask; + if (compp->config->irq_mode == COMP_IRQ_FALLING || compp->config->irq_mode == COMP_IRQ_BOTH) + EXTI->FTSR2 |= cmask; + else + EXTI->FTSR2 &= ~cmask; + + /* Programming interrupt and event registers.*/ + EXTI->IMR2 |= cmask; + EXTI->EMR2 &= ~cmask; + } +#endif +} + +/** + * @brief Deactivate an EXT channel (used by comp) + * + * @param[in] compp pointer to the @p COMPDriver object + * @param[in] channel EXT channel + * + * @notapi + */ +void comp_ext_lld_channel_disable(COMPDriver *compp, uint32_t channel) { + + (void) compp; + uint32_t cmask = (1 << (channel & 0x1F)); + +#if STM32_EXTI_NUM_LINES > 32 + if (channel < 32) { +#endif + EXTI->IMR &= ~cmask; + EXTI->EMR &= ~cmask; + EXTI->RTSR &= ~cmask; + EXTI->FTSR &= ~cmask; + EXTI->PR = cmask; +#if STM32_EXTI_NUM_LINES > 32 + } + else { + EXTI->IMR2 &= ~cmask; + EXTI->EMR2 &= ~cmask; + EXTI->RTSR2 &= ~cmask; + EXTI->FTSR2 &= ~cmask; + EXTI->PR2 = cmask; + } +#endif +} + +/** + * @brief Configures and activates the COMP peripheral. + * + * @param[in] compp pointer to the @p COMPDriver object + * + * @notapi + */ +void comp_lld_start(COMPDriver *compp) { + + // Apply CSR Execpt the enable bit. + compp->reg->CSR = compp->config->csr & ~COMP_CSR_COMPxEN; + + // Inverted output + if (compp->config->output_mode == COMP_OUTPUT_INVERTED) + compp->reg->CSR |= COMP_CSR_COMPxPOL; + +#if STM32_COMP_USE_INTERRUPTS +#if STM32_COMP_USE_COMP1 + if (compp == &COMPD1) { + comp_ext_lld_channel_enable(compp, 21); + } +#endif + +#if STM32_COMP_USE_COMP2 + if (compp == &COMPD2) { + comp_ext_lld_channel_enable(compp, 22); + } +#endif + +#if STM32_COMP_USE_COMP3 + if (compp == &COMPD3) { + comp_ext_lld_channel_enable(compp, 29); + } +#endif + +#if STM32_COMP_USE_COMP4 + if (compp == &COMPD4) { + comp_ext_lld_channel_enable(compp, 30); + } +#endif + +#if STM32_COMP_USE_COMP5 + if (compp == &COMPD5) { + comp_ext_lld_channel_enable(compp, 31); + } +#endif + +#if STM32_COMP_USE_COMP6 + if (compp == &COMPD6) { + comp_ext_lld_channel_enable(compp, 32); + } +#endif + +#if STM32_COMP_USE_COMP7 + if (compp == &COMPD7) { + comp_ext_lld_channel_enable(compp, 33); + } +#endif +#endif + +} + +/** + * @brief Deactivates the comp peripheral. + * + * @param[in] compp pointer to the @p COMPDriver object + * + * @notapi + */ +void comp_lld_stop(COMPDriver *compp) { + + if (compp->state == COMP_READY) { + + compp->reg->CSR = 0; + } + +#if STM32_COMP_USE_INTERRUPTS +#if STM32_COMP_USE_COMP1 + if (compp == &COMPD1) { + comp_ext_lld_channel_disable(compp, 21); + } +#endif + +#if STM32_COMP_USE_COMP2 + if (compp == &COMPD2) { + comp_ext_lld_channel_disable(compp, 22); + } +#endif + +#if STM32_COMP_USE_COMP3 + if (compp == &COMPD3) { + comp_ext_lld_channel_disable(compp, 29); + } +#endif + +#if STM32_COMP_USE_COMP4 + if (compp == &COMPD4) { + comp_ext_lld_channel_disable(compp, 30); + } +#endif + +#if STM32_COMP_USE_COMP5 + if (compp == &COMPD5) { + comp_ext_lld_channel_disable(compp, 31); + } +#endif + +#if STM32_COMP_USE_COMP6 + if (compp == &COMPD6) { + comp_ext_lld_channel_disable(compp, 32); + } +#endif + +#if STM32_COMP_USE_COMP7 + if (compp == &COMPD7) { + comp_ext_lld_channel_disable(compp, 33); + } +#endif +#endif + +} + +/** + * @brief Enables the output. + * + * @param[in] compp pointer to the @p COMPDriver object + * + * @notapi + */ +void comp_lld_enable(COMPDriver *compp) { + + compp->reg->CSR |= COMP_CSR_COMPxEN; /* Enable */ +} + +/** + * @brief Disables the output. + * + * @param[in] compp pointer to the @p COMPDriver object + * + * @notapi + */ +void comp_lld_disable(COMPDriver *compp) { + + compp->reg->CSR &= ~COMP_CSR_COMPxEN; /* Disable */ +} + +#endif /* HAL_USE_COMP */ + +/** @} */ diff --git a/os/hal/ports/STM32/LLD/COMPv1/hal_comp_lld.h b/os/hal/ports/STM32/LLD/COMPv1/hal_comp_lld.h new file mode 100644 index 0000000..bb40327 --- /dev/null +++ b/os/hal/ports/STM32/LLD/COMPv1/hal_comp_lld.h @@ -0,0 +1,482 @@ +/* + ChibiOS - Copyright (C) 2006..2017 Giovanni Di Sirio + Copyright (C) 2017 Fabien Poussin (fabien.poussin (at) google's mail) + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file STM32/comp_lld.h + * @brief STM32 Comparator subsystem low level driver header. + * + * @addtogroup COMP + * @{ + */ + +#ifndef HAL_COMP_LLD_H_ +#define HAL_COMP_LLD_H_ + +#include "hal.h" + +#if HAL_USE_COMP || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + + +#define STM32_COMP_InvertingInput_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */ +#define STM32_COMP_InvertingInput_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */ +#define STM32_COMP_InvertingInput_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */ +#define STM32_COMP_InvertingInput_VREFINT ((uint32_t)0x00000030) /*!< VREFINT connected to comparator inverting input */ +#define STM32_COMP_InvertingInput_DAC1OUT1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_OUT1 (PA4) connected to comparator inverting input */ +#define STM32_COMP_InvertingInput_DAC1OUT2 ((uint32_t)0x00000050) /*!< DAC1_OUT2 (PA5) connected to comparator inverting input */ + +#define STM32_COMP_InvertingInput_IO1 ((uint32_t)0x00000060) /*!< I/O1 (PA0 for COMP1, PA2 for COMP2, PD15 for COMP3, + PE8 for COMP4, PD13 for COMP5, PD10 for COMP6, + PC0 for COMP7) connected to comparator inverting input */ + +#define STM32_COMP_InvertingInput_IO2 COMP_CSR_COMPxINSEL /*!< I/O2 (PB12 for COMP3, PB2 for COMP4, PB10 for COMP5, + PB15 for COMP6) connected to comparator inverting input. + It is valid only for STM32F303xC devices */ + +#define STM32_COMP_InvertingInput_DAC2OUT1 COMP_CSR_COMPxINSEL_3 /*!< DAC2_OUT1 (PA6) connected to comparator inverting input */ + + +#define STM32_COMP_NonInvertingInput_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA7 for COMP2, PB14 for COMP3, + PB0 for COMP4, PD12 for COMP5, PD11 for COMP6, + PA0 for COMP7) connected to comparator non inverting input */ + +#define STM32_COMP_NonInvertingInput_IO2 COMP_CSR_COMPxNONINSEL /*!< I/O2 (PA3 for COMP2, PD14 for COMP3, PE7 for COMP4, PB13 for COMP5, + PB11 for COMP6, PC1 for COMP7) connected to comparator non inverting input */ + + +#define STM32_COMP_Output_None ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */ + +/* Output Redirection common for all comparators COMP1...COMP7 */ +#define STM32_COMP_Output_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */ +#define STM32_COMP_Output_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */ +#define STM32_COMP_Output_TIM8BKIN ((uint32_t)0x00000C00) /*!< COMP output connected to TIM8 Break Input (BKIN) */ +#define STM32_COMP_Output_TIM8BKIN2 ((uint32_t)0x00001000) /*!< COMP output connected to TIM8 Break Input 2 (BKIN2) */ +#define STM32_COMP_Output_TIM1BKIN2_TIM8BKIN2 ((uint32_t)0x00001400) /*!< COMP output connected to TIM1 Break Input 2 and TIM8 Break Input 2 */ +#define STM32_COMP_Output_TIM20BKIN ((uint32_t)0x00003000) /*!< COMP output connected to TIM20 Break Input (BKIN) */ +#define STM32_COMP_Output_TIM20BKIN2 ((uint32_t)0x00003400) /*!< COMP output connected to TIM20 Break Input 2 (BKIN2) */ +#define STM32_COMP_Output_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2 ((uint32_t)0x00001400) /*!< COMP output connected to TIM1 Break Input 2, TIM8 Break Input 2 and TIM20 Break Input2 */ + +/* Output Redirection common for COMP1 and COMP2 */ +#define STM32_COMP_Output_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */ +#define STM32_COMP_Output_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */ +#define STM32_COMP_Output_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */ +#define STM32_COMP_Output_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */ +#define STM32_COMP_Output_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */ +#define STM32_COMP_Output_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */ + +/* Output Redirection specific to COMP2 */ +#define STM32_COMP_Output_HRTIM1_FLT6 ((uint32_t)0x00003000) /*!< COMP output connected to HRTIM1 FLT6 */ +#define STM32_COMP_Output_HRTIM1_EE1_2 ((uint32_t)0x00003400) /*!< COMP output connected to HRTIM1 EE1_2*/ +#define STM32_COMP_Output_HRTIM1_EE6_2 ((uint32_t)0x00003800) /*!< COMP output connected to HRTIM1 EE6_2 */ +#define STM32_COMP_Output_TIM20OCREFCLR ((uint32_t)0x00003C00) /*!< COMP output connected to TIM20 OCREF Clear */ + +/* Output Redirection specific to COMP3 */ +#define STM32_COMP_Output_TIM4IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM4 Input Capture 1 */ +#define STM32_COMP_Output_TIM3IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM3 Input Capture 2 */ +#define STM32_COMP_Output_TIM15IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 Input Capture 1 */ +#define STM32_COMP_Output_TIM15BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM15 Break Input (BKIN) */ + +/* Output Redirection specific to COMP4 */ +#define STM32_COMP_Output_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */ +#define STM32_COMP_Output_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */ +#define STM32_COMP_Output_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */ +#define STM32_COMP_Output_TIM4IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 2 */ +#define STM32_COMP_Output_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */ + +#define STM32_COMP_Output_HRTIM1_FLT7 ((uint32_t)0x00003000) /*!< COMP output connected to HRTIM1 FLT7 */ +#define STM32_COMP_Output_HRTIM1_EE2_2 ((uint32_t)0x00003400) /*!< COMP output connected to HRTIM1 EE2_2*/ +#define STM32_COMP_Output_HRTIM1_EE7_2 ((uint32_t)0x00003800) /*!< COMP output connected to HRTIM1 EE7_2 */ + +/* Output Redirection specific to COMP5 */ +#define STM32_COMP_Output_TIM2IC1 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 1 */ +#define STM32_COMP_Output_TIM17IC1 ((uint32_t)0x00002000) /*!< COMP output connected to TIM17 Input Capture 1 */ +#define STM32_COMP_Output_TIM4IC3 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 3 */ +#define STM32_COMP_Output_TIM16BKIN ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Break Input (BKIN) */ + +/* Output Redirection specific to COMP6 */ +#define STM32_COMP_Output_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */ +#define STM32_COMP_Output_COMP6TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 OCREF Clear */ +#define STM32_COMP_Output_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */ +#define STM32_COMP_Output_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */ +#define STM32_COMP_Output_TIM4IC4 ((uint32_t)0x00002C00) /*!< COMP output connected to TIM4 Input Capture 4 */ + +#define STM32_COMP_Output_HRTIM1_FLT8 ((uint32_t)0x00003000) /*!< COMP output connected to HRTIM1 FLT8 */ +#define STM32_COMP_Output_HRTIM1_EE3_2 ((uint32_t)0x00003400) /*!< COMP output connected to HRTIM1 EE3_2*/ +#define STM32_COMP_Output_HRTIM1_EE8_2 ((uint32_t)0x00003800) /*!< COMP output connected to HRTIM1 EE8_2 */ + +/* Output Redirection specific to COMP7 */ +#define STM32_COMP_Output_TIM2IC3 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 3 */ +#define STM32_COMP_Output_TIM1IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM1 Input Capture 2 */ +#define STM32_COMP_Output_TIM17OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 OCREF Clear */ +#define STM32_COMP_Output_TIM17BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM16 Break Input (BKIN) */ + +/* No blanking source can be selected for all comparators */ +#define STM32_COMP_BlankingSrce_None ((uint32_t)0x00000000) /*!< No blanking source */ + +/* Blanking source common for COMP1, COMP2, COMP3 and COMP7 */ +#define STM32_COMP_BlankingSrce_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for compartor */ + +/* Blanking source common for COMP1 and COMP2 */ +#define STM32_COMP_BlankingSrce_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC5 selected as blanking source for compartor */ + +/* Blanking source common for COMP1, COMP2 and COMP5 */ +#define STM32_COMP_BlankingSrce_TIM3OC3 ((uint32_t)0x000C0000) /*!< TIM2 OC3 selected as blanking source for compartor */ + +/* Blanking source common for COMP3 and COMP6 */ +#define STM32_COMP_BlankingSrce_TIM2OC4 ((uint32_t)0x000C0000) /*!< TIM2 OC4 selected as blanking source for compartor */ + +/* Blanking source common for COMP4, COMP5, COMP6 and COMP7 */ +#define STM32_COMP_BlankingSrce_TIM8OC5 COMP_CSR_COMPxBLANKING_1 /*!< TIM8 OC5 selected as blanking source for compartor */ + +/* Blanking source for COMP4 */ +#define STM32_COMP_BlankingSrce_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for compartor */ +#define STM32_COMP_BlankingSrce_TIM15OC1 ((uint32_t)0x000C0000) /*!< TIM15 OC1 selected as blanking source for compartor */ + +/* Blanking source common for COMP6 and COMP7 */ +#define STM32_COMP_BlankingSrce_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for compartor */ + +#define STM32_COMP_OutputPol_NonInverted ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */ +#define STM32_COMP_OutputPol_Inverted COMP_CSR_COMPxPOL /*!< COMP output on GPIO is inverted */ + +#define STM32_COMP_Hysteresis_No 0x00000000 /*!< No hysteresis */ +#define STM32_COMP_Hysteresis_Low COMP_CSR_COMPxHYST_0 /*!< Hysteresis level low */ +#define STM32_COMP_Hysteresis_Medium COMP_CSR_COMPxHYST_1 /*!< Hysteresis level medium */ +#define STM32_COMP_Hysteresis_High COMP_CSR_COMPxHYST /*!< Hysteresis level high */ + +#define STM32_COMP_Mode_HighSpeed 0x00000000 /*!< High Speed */ +#define STM32_COMP_Mode_MediumSpeed COMP_CSR_COMPxMODE_0 /*!< Medium Speed */ +#define STM32_COMP_Mode_LowPower COMP_CSR_COMPxMODE_1 /*!< Low power mode */ +#define STM32_COMP_Mode_UltraLowPower COMP_CSR_COMPxMODE /*!< Ultra-low power mode */ + +/* When output polarity is not inverted, comparator output is high when + the non-inverting input is at a higher voltage than the inverting input */ +#define STM32_COMP_OutputLevel_High COMP_CSR_COMPxOUT +/* When output polarity is not inverted, comparator output is low when + the non-inverting input is at a lower voltage than the inverting input*/ +#define STM32_COMP_OutputLevel_Low ((uint32_t)0x00000000) + + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F303x8) \ +|| defined(STM32F318xx) || defined(STM32F328xx) || defined(STM32F334x8) +#define STM32_HAS_COMP1 FALSE +#define STM32_HAS_COMP2 TRUE +#define STM32_HAS_COMP3 FALSE +#define STM32_HAS_COMP4 TRUE +#define STM32_HAS_COMP5 FALSE +#define STM32_HAS_COMP6 TRUE +#define STM32_HAS_COMP7 FALSE + +#elif defined(STM32F302xc) || defined(STM32F302xe) +#define STM32_HAS_COMP1 TRUE +#define STM32_HAS_COMP2 TRUE +#define STM32_HAS_COMP3 FALSE +#define STM32_HAS_COMP4 TRUE +#define STM32_HAS_COMP5 FALSE +#define STM32_HAS_COMP6 TRUE +#define STM32_HAS_COMP7 FALSE + +#elif defined(STM32F303xC) || defined(STM32F303xE) || defined(STM32F358xx) || defined(STM32F398xx) +#define STM32_HAS_COMP1 TRUE +#define STM32_HAS_COMP2 TRUE +#define STM32_HAS_COMP3 TRUE +#define STM32_HAS_COMP4 TRUE +#define STM32_HAS_COMP5 TRUE +#define STM32_HAS_COMP6 TRUE +#define STM32_HAS_COMP7 TRUE + +#elif defined(STM32F373xx) || defined(STM32F378xx) || defined(STM32L0XX) || defined(STM32L1XX) \ + || defined(STM32F051x8) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F078xx) \ + || defined(STM32F072xb) || defined(STM32F071xb) +#define STM32_HAS_COMP1 TRUE +#define STM32_HAS_COMP2 TRUE +#define STM32_HAS_COMP3 FALSE +#define STM32_HAS_COMP4 FALSE +#define STM32_HAS_COMP5 FALSE +#define STM32_HAS_COMP6 FALSE +#define STM32_HAS_COMP7 FALSE + +#else +#define STM32_HAS_COMP1 FALSE +#define STM32_HAS_COMP2 FALSE +#define STM32_HAS_COMP3 FALSE +#define STM32_HAS_COMP4 FALSE +#define STM32_HAS_COMP5 FALSE +#define STM32_HAS_COMP6 FALSE +#define STM32_HAS_COMP7 FALSE + +#endif + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @name Configuration options + * @{ + */ + +/** + * @brief COMP INTERRUPTS. + * @details If set to @p TRUE the support for COMPD1 is included. + * @note The default is @p FALSE. + */ +#if !defined(STM32_COMP_USE_INTERRUPTS) || defined(__DOXYGEN__) +#define STM32_COMP_USE_INTERRUPTS FALSE +#endif + +/** + * @brief COMPD1 driver enable switch. + * @details If set to @p TRUE the support for COMPD1 is included. + * @note The default is @p FALSE. + */ +#if !defined(STM32_COMP_USE_COMP1) || defined(__DOXYGEN__) +#define STM32_COMP_USE_COMP1 FALSE +#endif + +/** + * @brief COMPD2 driver enable switch. + * @details If set to @p TRUE the support for COMPD2 is included. + * @note The default is @p FALSE. + */ +#if !defined(STM32_COMP_USE_COMP2) || defined(__DOXYGEN__) +#define STM32_COMP_USE_COMP2 FALSE +#endif + +/** + * @brief COMPD3 driver enable switch. + * @details If set to @p TRUE the support for COMPD3 is included. + * @note The default is @p FALSE. + */ +#if !defined(STM32_COMP_USE_COMP3) || defined(__DOXYGEN__) +#define STM32_COMP_USE_COMP3 FALSE +#endif + +/** + * @brief COMPD4 driver enable switch. + * @details If set to @p TRUE the support for COMPD4 is included. + * @note The default is @p FALSE. + */ +#if !defined(STM32_COMP_USE_COMP4) || defined(__DOXYGEN__) +#define STM32_COMP_USE_COMP4 FALSE +#endif + +/** + * @brief COMPD5 driver enable switch. + * @details If set to @p TRUE the support for COMPD4 is included. + * @note The default is @p FALSE. + */ +#if !defined(STM32_COMP_USE_COMP5) || defined(__DOXYGEN__) +#define STM32_COMP_USE_COMP5 FALSE +#endif + +/** + * @brief COMPD6 driver enable switch. + * @details If set to @p TRUE the support for COMPD4 is included. + * @note The default is @p FALSE. + */ +#if !defined(STM32_COMP_USE_COMP6) || defined(__DOXYGEN__) +#define STM32_COMP_USE_COMP6 FALSE +#endif + +/** + * @brief COMPD7 driver enable switch. + * @details If set to @p TRUE the support for COMPD4 is included. + * @note The default is @p FALSE. + */ +#if !defined(STM32_COMP_USE_COMP7) || defined(__DOXYGEN__) +#define STM32_COMP_USE_COMP7 FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +#if STM32_COMP_USE_INTERRUPTS && defined(STM32F0XX) +#error "Interrupts are shared with EXTI on F0s (lines 21-22)" +#endif + +#if STM32_COMP_USE_INTERRUPTS +#if !defined(STM32_DISABLE_EXTI21_22_29_HANDLER) || !defined(STM32_DISABLE_EXTI30_32_HANDLER) || !defined(STM32_DISABLE_EXTI33_HANDLER) +#error "COMP needs these defines in mcuconf to use interrupts: STM32_DISABLE_EXTI21_22_29_HANDLER STM32_DISABLE_EXTI30_32_HANDLER STM32_DISABLE_EXTI33_HANDLER" +#endif +#endif + +#if STM32_COMP_USE_COMP1 && !STM32_HAS_COMP1 +#error "COMP1 not present in the selected device" +#endif + +#if STM32_COMP_USE_COMP2 && !STM32_HAS_COMP2 +#error "COMP2 not present in the selected device" +#endif + +#if STM32_COMP_USE_COMP3 && !STM32_HAS_COMP3 +#error "COMP3 not present in the selected device" +#endif + +#if STM32_COMP_USE_COMP4 && !STM32_HAS_COMP4 +#error "COMP4 not present in the selected device" +#endif + +#if STM32_COMP_USE_COMP5 && !STM32_HAS_COMP5 +#error "COMP5 not present in the selected device" +#endif + +#if STM32_COMP_USE_COMP6 && !STM32_HAS_COMP6 +#error "COMP6 not present in the selected device" +#endif + +#if STM32_COMP_USE_COMP7 && !STM32_HAS_COMP7 +#error "COMP7 not present in the selected device" +#endif + +#if !STM32_COMP_USE_COMP1 && !STM32_COMP_USE_COMP2 && \ + !STM32_COMP_USE_COMP3 && !STM32_COMP_USE_COMP4 && \ + !STM32_COMP_USE_COMP6 && !STM32_COMP_USE_COMP6 && \ + !STM32_COMP_USE_COMP7 +#error "COMP driver activated but no COMP peripheral assigned" +#endif + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/** + * @brief COMP output mode. + */ +typedef enum { + COMP_OUTPUT_NORMAL = 0, + COMP_OUTPUT_INVERTED = 1 +} comp_output_mode_t; + +/** + * @brief COMP interrupt mode. + */ +typedef enum { + COMP_IRQ_RISING = 0, + COMP_IRQ_FALLING = 1, + COMP_IRQ_BOTH = 2 +} comp_irq_mode_t; + +/** + * @brief Driver configuration structure. + * @note It could be empty on some architectures. + */ +typedef struct { + /** + * @brief Ouput mode. + */ + comp_output_mode_t output_mode; + + /** + * @brief Ouput mode. + */ + comp_irq_mode_t irq_mode; + + /** + * @brief Callback. + */ + compcallback_t cb; + + /* End of the mandatory fields.*/ + + /** + * @brief COMP CSR register initialization data. + * @note The value of this field should normally be equal to zero. + */ + uint32_t csr; +} COMPConfig; + +/** + * @brief Structure representing an COMP driver. + */ +struct COMPDriver { + /** + * @brief Driver state. + */ + compstate_t state; + /** + * @brief Current configuration data. + */ + const COMPConfig *config; +#if defined(COMP_DRIVER_EXT_FIELDS) + COMP_DRIVER_EXT_FIELDS +#endif + /* End of the mandatory fields.*/ + /** + * @brief Pointer to the COMPx registers block. + */ + COMP_TypeDef *reg; +}; + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#if STM32_COMP_USE_COMP1 && !defined(__DOXYGEN__) +extern COMPDriver COMPD1; +#endif + +#if STM32_COMP_USE_COMP2 && !defined(__DOXYGEN__) +extern COMPDriver COMPD2; +#endif + +#if STM32_COMP_USE_COMP3 && !defined(__DOXYGEN__) +extern COMPDriver COMPD3; +#endif + +#if STM32_COMP_USE_COMP4 && !defined(__DOXYGEN__) +extern COMPDriver COMPD4; +#endif + +#if STM32_COMP_USE_COMP5 && !defined(__DOXYGEN__) +extern COMPDriver COMPD5; +#endif + +#if STM32_COMP_USE_COMP6 && !defined(__DOXYGEN__) +extern COMPDriver COMPD6; +#endif + +#if STM32_COMP_USE_COMP7 && !defined(__DOXYGEN__) +extern COMPDriver COMPD7; +#endif + +#ifdef __cplusplus +extern "C" { +#endif + void comp_lld_init(void); + void comp_lld_start(COMPDriver *compp); + void comp_lld_stop(COMPDriver *compp); + void comp_lld_enable(COMPDriver *compp); + void comp_lld_disable(COMPDriver *compp); +#ifdef __cplusplus +} +#endif + +#endif /* HAL_USE_COMP */ + +#endif /* _comp_lld_H_ */ + +/** @} */ diff --git a/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c b/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c index 601deca..701b87d 100644..100755 --- a/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c +++ b/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c @@ -15,7 +15,7 @@ */ /** - * @file STM32/CRCv1/crc_lld.c + * @file STM32/CRCv1/hal_crc_lld.c * @brief STM32 CRC subsystem low level driver source. * * @addtogroup CRC @@ -155,7 +155,7 @@ void crc_lld_start(CRCDriver *crcp) { if (crcp->config == NULL) crcp->config = &default_config; - rccEnableCRC(FALSE); + rccEnableCRC(); #if STM32_CRC_PROGRAMMABLE == TRUE crcp->crc->INIT = crcp->config->initial_val; @@ -185,15 +185,15 @@ void crc_lld_start(CRCDriver *crcp) { crcp->crc->CR |= CRC_CR_REV_OUT; } #else - osalDbgAssert(crcp->config->initial_val != default_config.initial_val, + osalDbgAssert(crcp->config->initial_val == default_config.initial_val, "hardware doesn't support programmable initial value"); - osalDbgAssert(crcp->config->poly_size != default_config.poly_size, + osalDbgAssert(crcp->config->poly_size == default_config.poly_size, "hardware doesn't support programmable polynomial size"); - osalDbgAssert(crcp->config->poly != default_config.poly, + osalDbgAssert(crcp->config->poly == default_config.poly, "hardware doesn't support programmable polynomial"); - osalDbgAssert(crcp->config->reflect_data != default_config.reflect_data, + osalDbgAssert(crcp->config->reflect_data == default_config.reflect_data, "hardware doesn't support reflect of input data"); - osalDbgAssert(crcp->config->reflect_remainder != default_config.reflect_remainder, + osalDbgAssert(crcp->config->reflect_remainder == default_config.reflect_remainder, "hardware doesn't support reflect of output remainder"); #endif @@ -234,7 +234,7 @@ void crc_lld_stop(CRCDriver *crcp) { #else (void)crcp; #endif - rccDisableCRC(FALSE); + rccDisableCRC(); } /** @@ -299,7 +299,7 @@ uint32_t crc_lld_calc(CRCDriver *crcp, size_t n, const void *buf) { n--; } #else - osalDbgAssert(n != 0, "STM32 CRC Unit only supports WORD accesses"); + osalDbgAssert(n == 0, "STM32 CRC Unit only supports WORD accesses"); #endif #endif diff --git a/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h b/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h index ecdaf81..213d346 100644 --- a/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h +++ b/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h @@ -15,15 +15,15 @@ */ /** - * @file STM32/CRCv1/crc_lld.h + * @file STM32/CRCv1/hal_crc_lld.h * @brief STM32 CRC subsystem low level driver header. * * @addtogroup CRC * @{ */ -#ifndef _CRC_LLD_H_ -#define _CRC_LLD_H_ +#ifndef HAL_CRC_LLD_H_ +#define HAL_CRC_LLD_H_ #if (HAL_USE_CRC == TRUE) || defined(__DOXYGEN__) @@ -244,6 +244,6 @@ extern "C" { #endif /* HAL_USE_CRC */ -#endif /* _CRC_LLD_H_ */ +#endif /* HAL_CRC_LLD_H_ */ /** @} */ diff --git a/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.c b/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.c index aba029f..b7c9b49 100644 --- a/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.c +++ b/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.c @@ -15,11 +15,10 @@ */ /** - * @file stm32_dma2d.c + * @file hal_stm32_dma2d.c * @brief DMA2D/Chrom-ART driver. */ -#include "ch.h" #include "hal.h" #include "hal_stm32_dma2d.h" diff --git a/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.h b/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.h index 01f0941..c06ab62 100644 --- a/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.h +++ b/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.h @@ -15,15 +15,15 @@ */ /** - * @file stm32_dma2d.h + * @file hal_stm32_dma2d.h * @brief DMA2D/Chrom-ART driver. * * @addtogroup dma2d * @{ */ -#ifndef _STM32_DMA2D_H_ -#define _STM32_DMA2D_H_ +#ifndef HAL_STM32_DMA2D_H_ +#define HAL_STM32_DMA2D_H_ /** * @brief Using the DMA2D driver. @@ -659,6 +659,6 @@ extern "C" { #endif /* STM32_DMA2D_USE_DMA2D */ -#endif /* _STM32_DMA2D_H_ */ +#endif /* HAL_STM32_DMA2D_H_ */ /** @} */ diff --git a/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.c b/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.c index 8b1082c..71c6ada 100644 --- a/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.c +++ b/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.c @@ -15,7 +15,7 @@ */ /** - * @file fsmc.c + * @file hal_fsmc.c * @brief FSMC Driver subsystem low level driver source template. * * @addtogroup FSMC @@ -96,7 +96,11 @@ void fsmc_init(void) { #endif #if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) + defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F745xx) || defined(STM32F746xx) || \ + defined(STM32F756xx) || defined(STM32F767xx) || \ + defined(STM32F769xx) || defined(STM32F777xx) || \ + defined(STM32F779xx)) #if STM32_USE_FSMC_SDRAM FSMCD1.sdram = (FSMC_SDRAM_TypeDef *)FSMC_Bank5_6_R_BASE; #endif @@ -124,7 +128,7 @@ void fsmc_start(FSMCDriver *fsmcp) { rccResetFSMC(); #endif rccEnableFSMC(FALSE); -#if (!STM32_NAND_USE_EXT_INT && HAL_USE_NAND) +#if HAL_USE_NAND nvicEnableVector(STM32_FSMC_NUMBER, STM32_FSMC_FSMC1_IRQ_PRIORITY); #endif } @@ -152,10 +156,10 @@ void fsmc_stop(FSMCDriver *fsmcp) { /* Disables the peripheral.*/ #if STM32_FSMC_USE_FSMC1 if (&FSMCD1 == fsmcp) { -#if (!STM32_NAND_USE_EXT_INT && HAL_USE_NAND) +#if HAL_USE_NAND nvicDisableVector(STM32_FSMC_NUMBER); #endif - rccDisableFSMC(FALSE); + rccDisableFSMC(); } #endif /* STM32_FSMC_USE_FSMC1 */ @@ -163,7 +167,6 @@ void fsmc_stop(FSMCDriver *fsmcp) { } } -#if !STM32_NAND_USE_EXT_INT /** * @brief FSMC shared interrupt handler. * @@ -184,7 +187,6 @@ CH_IRQ_HANDLER(STM32_FSMC_HANDLER) { #endif CH_IRQ_EPILOGUE(); } -#endif /* !STM32_NAND_USE_EXT_INT */ #endif /* HAL_USE_FSMC */ diff --git a/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.h b/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.h index 7889b01..80c5d26 100644 --- a/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.h +++ b/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.h @@ -15,15 +15,15 @@ */ /** - * @file fsmc.h + * @file hal_fsmc.h * @brief FSMC Driver subsystem low level driver header. * * @addtogroup FSMC * @{ */ -#ifndef _FSMC_H_ -#define _FSMC_H_ +#ifndef HAL_FSMC_H_ +#define HAL_FSMC_H_ #if (HAL_USE_FSMC == TRUE) || defined(__DOXYGEN__) @@ -35,7 +35,11 @@ * (Re)define if needed base address constants supplied in ST's CMSIS */ #if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) + defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F745xx) || defined(STM32F746xx) || \ + defined(STM32F756xx) || defined(STM32F767xx) || \ + defined(STM32F769xx) || defined(STM32F777xx) || \ + defined(STM32F779xx)) #if !defined(FSMC_Bank1_R_BASE) #define FSMC_Bank1_R_BASE (FMC_R_BASE + 0x0000) #endif @@ -80,7 +84,8 @@ #define FSMC_Bank3_MAP_BASE ((uint32_t) 0x80000000) #define FSMC_Bank4_MAP_BASE ((uint32_t) 0x90000000) #if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) + defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F7)) #define FSMC_Bank5_MAP_BASE ((uint32_t) 0xC0000000) #define FSMC_Bank6_MAP_BASE ((uint32_t) 0xD0000000) #endif @@ -157,7 +162,8 @@ typedef struct { } FSMC_SRAM_NOR_TypeDef; #if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) + defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F7)) typedef struct { __IO uint32_t SDCR1; /**< SDRAM control register (bank 1) */ @@ -174,10 +180,15 @@ typedef struct { /** * @brief PCR register */ -#define FSMC_PCR_PWAITEN ((uint32_t)0x00000002) -#define FSMC_PCR_PBKEN ((uint32_t)0x00000004) -#define FSMC_PCR_PTYP ((uint32_t)0x00000008) -#define FSMC_PCR_ECCEN ((uint32_t)0x00000040) +#define FSMC_PCR_PWAITEN ((uint32_t)1 << 1) +#define FSMC_PCR_PBKEN ((uint32_t)1 << 2) +#define FSMC_PCR_PTYP ((uint32_t)1 << 3) +#define FSMC_PCR_PWID_8 ((uint32_t)0 << 4) +#define FSMC_PCR_PWID_16 ((uint32_t)1 << 4) +#define FSMC_PCR_PWID_RESERVED1 ((uint32_t)2 << 4) +#define FSMC_PCR_PWID_RESERVED2 ((uint32_t)3 << 4) +#define FSMC_PCR_PWID_MASK ((uint32_t)3 << 4) +#define FSMC_PCR_ECCEN ((uint32_t)1 << 6) #define FSMC_PCR_PTYP_PCCARD 0 #define FSMC_PCR_PTYP_NAND FSMC_PCR_PTYP @@ -205,7 +216,8 @@ typedef struct { #define FSMC_BCR_MWID_8 ((uint32_t)0 << 4) #define FSMC_BCR_MWID_16 ((uint32_t)1 << 4) #if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) + defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F7)) #define FSMC_BCR_MWID_32 ((uint32_t)2 << 4) #else #define FSMC_BCR_MWID_RESERVED1 ((uint32_t)2 << 4) @@ -221,6 +233,14 @@ typedef struct { #define FSMC_BCR_EXTMOD ((uint32_t)1 << 14) #define FSMC_BCR_ASYNCWAIT ((uint32_t)1 << 15) #define FSMC_BCR_CBURSTRW ((uint32_t)1 << 19) +#if (defined(STM32F427xx) || defined(STM32F437xx) || \ + defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F7)) +#define FSMC_BCR_CCLKEN ((uint32_t)1 << 20) +#endif +#if (defined(STM32F7)) +#define FSMC_BCR_WFDIS ((uint32_t)1 << 21) +#endif /*===========================================================================*/ /* Driver pre-compile time settings. */ @@ -238,15 +258,6 @@ typedef struct { #define STM32_FSMC_USE_FSMC1 FALSE #endif -/** - * @brief Internal FSMC interrupt enable switch - * @details MCUs in 100-pin package has no dedicated interrupt pin for FSMC. - * You have to use EXTI module instead to workaround this issue. - */ -#if !defined(STM32_NAND_USE_EXT_INT) || defined(__DOXYGEN__) -#define STM32_NAND_USE_EXT_INT FALSE -#endif - /** @} */ /*===========================================================================*/ @@ -303,7 +314,8 @@ struct FSMCDriver { FSMC_NAND_TypeDef *nand2; #endif #if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) + defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F7)) #if STM32_USE_FSMC_SDRAM FSMC_SDRAM_TypeDef *sdram; #endif @@ -334,6 +346,6 @@ extern "C" { #endif /* HAL_USE_FSMC */ -#endif /* _FSMC_H_ */ +#endif /* HAL_FSMC_H_ */ /** @} */ diff --git a/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.c b/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.c index 95f47d5..6d727c8 100644 --- a/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.c +++ b/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.c @@ -18,7 +18,7 @@ */ /** - * @file fsmc_sdram.c + * @file hal_fsmc_sdram.c * @brief SDRAM Driver subsystem low level driver source. * * @addtogroup SDRAM @@ -28,7 +28,11 @@ #include "hal.h" #if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) + defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F745xx) || defined(STM32F746xx) || \ + defined(STM32F756xx) || defined(STM32F767xx) || \ + defined(STM32F769xx) || defined(STM32F777xx) || \ + defined(STM32F779xx)) #if (STM32_USE_FSMC_SDRAM == TRUE) || defined(__DOXYGEN__) diff --git a/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.h b/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.h index cef6772..c9f9de0 100644 --- a/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.h +++ b/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sdram.h @@ -18,18 +18,22 @@ */ /** - * @file fsmc_sdram.h + * @file hal_fsmc_sdram.h * @brief SDRAM Driver subsystem low level driver header. * * @addtogroup SDRAM * @{ */ -#ifndef _FMC_SDRAM_H_ -#define _FMC_SDRAM_H_ +#ifndef HAL_FMC_SDRAM_H_ +#define HAL_FMC_SDRAM_H_ #if (defined(STM32F427xx) || defined(STM32F437xx) || \ - defined(STM32F429xx) || defined(STM32F439xx)) + defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F745xx) || defined(STM32F746xx) || \ + defined(STM32F756xx) || defined(STM32F767xx) || \ + defined(STM32F769xx) || defined(STM32F777xx) || \ + defined(STM32F779xx)) #include "hal_fsmc.h" @@ -166,6 +170,6 @@ extern "C" { #endif /* STM32F427xx / STM32F429xx / STM32F437xx / STM32F439xx */ -#endif /* _FMC_SDRAM_H_ */ +#endif /* HAL_FMC_SDRAM_H_ */ /** @} */ diff --git a/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.c b/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.c index 6f710d4..da13ca5 100644 --- a/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.c +++ b/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.c @@ -15,7 +15,7 @@ */ /** - * @file fsmc_sram.c + * @file hal_fsmc_sram.c * @brief SRAM Driver subsystem low level driver source. * * @addtogroup SRAM @@ -128,9 +128,9 @@ void fsmcSramStart(SRAMDriver *sramp, const SRAMConfig *cfgp) { "invalid state"); if (sramp->state == SRAM_STOP) { - sramp->sram->BCR = cfgp->bcr | FSMC_BCR_MBKEN; sramp->sram->BTR = cfgp->btr; sramp->sram->BWTR = cfgp->bwtr; + sramp->sram->BCR = cfgp->bcr | FSMC_BCR_MBKEN; sramp->state = SRAM_READY; } } @@ -145,7 +145,16 @@ void fsmcSramStart(SRAMDriver *sramp, const SRAMConfig *cfgp) { void fsmcSramStop(SRAMDriver *sramp) { if (sramp->state == SRAM_READY) { - sramp->sram->BCR &= ~FSMC_BCR_MBKEN; + uint32_t mask = FSMC_BCR_MBKEN; +#if (defined(STM32F427xx) || defined(STM32F437xx) || \ + defined(STM32F429xx) || defined(STM32F439xx) || \ + defined(STM32F745xx) || defined(STM32F746xx) || \ + defined(STM32F756xx) || defined(STM32F767xx) || \ + defined(STM32F769xx) || defined(STM32F777xx) || \ + defined(STM32F779xx)) + mask |= FSMC_BCR_CCLKEN; +#endif + sramp->sram->BCR &= ~mask; sramp->state = SRAM_STOP; } } diff --git a/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.h b/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.h index 529bdc7..5e749a8 100644 --- a/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.h +++ b/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.h @@ -15,15 +15,15 @@ */ /** - * @file fsmc_sram.h + * @file hal_fsmc_sram.h * @brief SRAM Driver subsystem low level driver header. * * @addtogroup SRAM * @{ */ -#ifndef _FSMC_SRAM_H_ -#define _FSMC_SRAM_H_ +#ifndef HAL_FSMC_SRAM_H_ +#define HAL_FSMC_SRAM_H_ #include "hal_fsmc.h" @@ -167,6 +167,6 @@ extern "C" { #endif /* STM32_USE_FSMC_SRAM */ -#endif /* _FSMC_SRAM_H_ */ +#endif /* HAL_FSMC_SRAM_H_ */ /** @} */ diff --git a/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.c b/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.c index b37c026..5729f92 100644 --- a/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.c +++ b/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.c @@ -15,7 +15,7 @@ */ /** - * @file nand_lld.c + * @file hal_nand_lld.c * @brief NAND Driver subsystem low level driver source. * * @addtogroup NAND @@ -33,6 +33,19 @@ STM32_DMA_GETCHANNEL(STM32_NAND_DMA_STREAM, \ STM32_FSMC_DMA_CHN) +/** + * @brief Bus width of NAND IC. + * @details Must be 8 or 16 + */ +#if ! defined(STM32_NAND_BUS_WIDTH) || defined(__DOXYGEN__) +#define STM32_NAND_BUS_WIDTH 8 +#endif + +/** + * @brief DMA transaction width on AHB bus in bytes + */ +#define AHB_TRANSACTION_WIDTH 2 + /*===========================================================================*/ /* Driver exported variables. */ /*===========================================================================*/ @@ -62,6 +75,47 @@ NANDDriver NANDD2; /*===========================================================================*/ /* Driver local functions. */ /*===========================================================================*/ + +/** + * @brief Helper function. + * + * @notapi + */ +static void align_check(const void *ptr, uint32_t len) { + osalDbgCheck((((uint32_t)ptr % AHB_TRANSACTION_WIDTH) == 0) && + ((len % AHB_TRANSACTION_WIDTH) == 0) && + (len >= AHB_TRANSACTION_WIDTH)); + (void)ptr; + (void)len; +} + +/** + * @brief Work around errata in STM32's FSMC core. + * @details Constant output clock (if enabled) disappears when CLKDIV value + * sets to 1 (FMC_CLK period = 2 × HCLK periods) AND 8-bit async + * transaction generated on AHB. This workaround eliminates 8-bit + * transactions on bus when you use 8-bit memory. It suitable only + * for 8-bit memory (i.e. PWID bits in PCR register must be set + * to 8-bit mode). + * + * @notapi + */ +static void set_16bit_bus(NANDDriver *nandp) { +#if STM32_NAND_BUS_WIDTH + nandp->nand->PCR |= FSMC_PCR_PWID_16; +#else + (void)nandp; +#endif +} + +static void set_8bit_bus(NANDDriver *nandp) { +#if STM32_NAND_BUS_WIDTH + nandp->nand->PCR &= ~FSMC_PCR_PWID_16; +#else + (void)nandp; +#endif +} + /** * @brief Wakes up the waiting thread. * @@ -117,13 +171,10 @@ static uint32_t calc_eccps(NANDDriver *nandp) { * @notapi */ static void nand_ready_isr_enable(NANDDriver *nandp) { -#if STM32_NAND_USE_EXT_INT - nandp->config->ext_nand_isr_enable(); -#else + nandp->nand->SR &= ~(FSMC_SR_IRS | FSMC_SR_ILS | FSMC_SR_IFS | - FSMC_SR_ILEN | FSMC_SR_IFEN); + FSMC_SR_ILEN | FSMC_SR_IFEN); nandp->nand->SR |= FSMC_SR_IREN; -#endif } /** @@ -134,11 +185,8 @@ static void nand_ready_isr_enable(NANDDriver *nandp) { * @notapi */ static void nand_ready_isr_disable(NANDDriver *nandp) { -#if STM32_NAND_USE_EXT_INT - nandp->config->ext_nand_isr_disable(); -#else + nandp->nand->SR &= ~FSMC_SR_IREN; -#endif } /** @@ -148,31 +196,24 @@ static void nand_ready_isr_disable(NANDDriver *nandp) { * * @notapi */ -static void nand_isr_handler (NANDDriver *nandp) { +static void nand_isr_handler(NANDDriver *nandp) { osalSysLockFromISR(); -#if !STM32_NAND_USE_EXT_INT osalDbgCheck(nandp->nand->SR & FSMC_SR_IRS); /* spurious interrupt happened */ nandp->nand->SR &= ~FSMC_SR_IRS; -#endif switch (nandp->state){ case NAND_READ: nandp->state = NAND_DMA_RX; - dmaStartMemCopy(nandp->dma, nandp->dmamode, - nandp->map_data, nandp->rxdata, nandp->datalen); + dmaStartMemCopy(nandp->dma, nandp->dmamode, nandp->map_data, nandp->rxdata, + nandp->datalen/AHB_TRANSACTION_WIDTH); /* thread will be waked up from DMA ISR */ break; - case NAND_ERASE: - /* NAND reports about erase finish */ - nandp->state = NAND_READY; - wakeup_isr(nandp); - break; - - case NAND_PROGRAM: - /* NAND reports about page programming finish */ + case NAND_ERASE: /* NAND reports about erase finish */ + case NAND_PROGRAM: /* NAND reports about page programming finish */ + case NAND_RESET: /* NAND reports about finished reset recover */ nandp->state = NAND_READY; wakeup_isr(nandp); break; @@ -210,7 +251,7 @@ static void nand_lld_serve_transfer_end_irq(NANDDriver *nandp, uint32_t flags) { case NAND_DMA_TX: nandp->state = NAND_PROGRAM; nandp->map_cmd[0] = NAND_CMD_PAGEPROG; - /* thread will be woken from ready_isr() */ + /* thread will be woken up from ready_isr() */ break; case NAND_DMA_RX: @@ -249,9 +290,9 @@ void nand_lld_init(void) { NANDD1.thread = NULL; NANDD1.dma = STM32_DMA_STREAM(STM32_NAND_DMA_STREAM); NANDD1.nand = FSMCD1.nand1; - NANDD1.map_data = (uint8_t*)FSMC_Bank2_MAP_COMMON_DATA; - NANDD1.map_cmd = (uint8_t*)FSMC_Bank2_MAP_COMMON_CMD; - NANDD1.map_addr = (uint8_t*)FSMC_Bank2_MAP_COMMON_ADDR; + NANDD1.map_data = (void *)FSMC_Bank2_MAP_COMMON_DATA; + NANDD1.map_cmd = (uint16_t *)FSMC_Bank2_MAP_COMMON_CMD; + NANDD1.map_addr = (uint16_t *)FSMC_Bank2_MAP_COMMON_ADDR; NANDD1.bb_map = NULL; #endif /* STM32_NAND_USE_FSMC_NAND1 */ @@ -263,9 +304,9 @@ void nand_lld_init(void) { NANDD2.thread = NULL; NANDD2.dma = STM32_DMA_STREAM(STM32_NAND_DMA_STREAM); NANDD2.nand = FSMCD1.nand2; - NANDD2.map_data = (uint8_t*)FSMC_Bank3_MAP_COMMON_DATA; - NANDD2.map_cmd = (uint8_t*)FSMC_Bank3_MAP_COMMON_CMD; - NANDD2.map_addr = (uint8_t*)FSMC_Bank3_MAP_COMMON_ADDR; + NANDD2.map_data = (void *)FSMC_Bank3_MAP_COMMON_DATA; + NANDD2.map_cmd = (uint16_t *)FSMC_Bank3_MAP_COMMON_CMD; + NANDD2.map_addr = (uint16_t *)FSMC_Bank3_MAP_COMMON_ADDR; NANDD2.bb_map = NULL; #endif /* STM32_NAND_USE_FSMC_NAND2 */ } @@ -280,6 +321,8 @@ void nand_lld_init(void) { void nand_lld_start(NANDDriver *nandp) { bool b; + uint32_t dmasize; + uint32_t pcr_bus_width; if (FSMCD1.state == FSMC_STOP) fsmc_start(&FSMCD1); @@ -290,16 +333,33 @@ void nand_lld_start(NANDDriver *nandp) { (stm32_dmaisr_t)nand_lld_serve_transfer_end_irq, (void *)nandp); osalDbgAssert(!b, "stream already allocated"); + +#if AHB_TRANSACTION_WIDTH == 4 + dmasize = STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD; +#elif AHB_TRANSACTION_WIDTH == 2 + dmasize = STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD; +#elif AHB_TRANSACTION_WIDTH == 1 + dmasize = STM32_DMA_CR_PSIZE_BYTE | STM32_DMA_CR_MSIZE_BYTE; +#else +#error "Incorrect AHB_TRANSACTION_WIDTH" +#endif + nandp->dmamode = STM32_DMA_CR_CHSEL(NAND_DMA_CHANNEL) | STM32_DMA_CR_PL(STM32_NAND_NAND1_DMA_PRIORITY) | - STM32_DMA_CR_PSIZE_BYTE | - STM32_DMA_CR_MSIZE_BYTE | + dmasize | STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE | STM32_DMA_CR_TCIE; - /* dmaStreamSetFIFO(nandp->dma, - STM32_DMA_FCR_DMDIS | NAND_STM32_DMA_FCR_FTH_LVL); */ - nandp->nand->PCR = calc_eccps(nandp) | FSMC_PCR_PTYP | FSMC_PCR_PBKEN; + +#if STM32_NAND_BUS_WIDTH == 8 + pcr_bus_width = FSMC_PCR_PWID_8; +#elif STM32_NAND_BUS_WIDTH == 16 + pcr_bus_width = FSMC_PCR_PWID_16; +#else +#error "Bus width must be 8 or 16 bits" +#endif + nandp->nand->PCR = pcr_bus_width | calc_eccps(nandp) | + FSMC_PCR_PTYP_NAND | FSMC_PCR_PBKEN; nandp->nand->PMEM = nandp->config->pmem; nandp->nand->PATT = nandp->config->pmem; nandp->isr_handler = nand_isr_handler; @@ -329,24 +389,28 @@ void nand_lld_stop(NANDDriver *nandp) { * * @param[in] nandp pointer to the @p NANDDriver object * @param[out] data pointer to data buffer - * @param[in] datalen size of data buffer + * @param[in] datalen size of data buffer in bytes * @param[in] addr pointer to address buffer * @param[in] addrlen length of address * @param[out] ecc pointer to store computed ECC. Ignored when NULL. * * @notapi */ -void nand_lld_read_data(NANDDriver *nandp, uint8_t *data, size_t datalen, +void nand_lld_read_data(NANDDriver *nandp, uint16_t *data, size_t datalen, uint8_t *addr, size_t addrlen, uint32_t *ecc){ + align_check(data, datalen); + nandp->state = NAND_READ; nandp->rxdata = data; nandp->datalen = datalen; - nand_lld_write_cmd (nandp, NAND_CMD_READ0); + set_16bit_bus(nandp); + nand_lld_write_cmd(nandp, NAND_CMD_READ0); nand_lld_write_addr(nandp, addr, addrlen); osalSysLock(); - nand_lld_write_cmd (nandp, NAND_CMD_READ0_CONFIRM); + nand_lld_write_cmd(nandp, NAND_CMD_READ0_CONFIRM); + set_8bit_bus(nandp); /* Here NAND asserts busy signal and starts transferring from memory array to page buffer. After the end of transmission ready_isr functions @@ -375,7 +439,7 @@ void nand_lld_read_data(NANDDriver *nandp, uint8_t *data, size_t datalen, * * @param[in] nandp pointer to the @p NANDDriver object * @param[in] data buffer with data to be written - * @param[in] datalen size of data buffer + * @param[in] datalen size of data buffer in bytes * @param[in] addr pointer to address buffer * @param[in] addrlen length of address * @param[out] ecc pointer to store computed ECC. Ignored when NULL. @@ -384,14 +448,18 @@ void nand_lld_read_data(NANDDriver *nandp, uint8_t *data, size_t datalen, * * @notapi */ -uint8_t nand_lld_write_data(NANDDriver *nandp, const uint8_t *data, +uint8_t nand_lld_write_data(NANDDriver *nandp, const uint16_t *data, size_t datalen, uint8_t *addr, size_t addrlen, uint32_t *ecc) { + align_check(data, datalen); + nandp->state = NAND_WRITE; - nand_lld_write_cmd (nandp, NAND_CMD_WRITE); + set_16bit_bus(nandp); + nand_lld_write_cmd(nandp, NAND_CMD_WRITE); osalSysLock(); nand_lld_write_addr(nandp, addr, addrlen); + set_8bit_bus(nandp); /* Now start DMA transfer to NAND buffer and put thread in sleep state. Tread will be woken up from ready ISR. */ @@ -403,7 +471,8 @@ uint8_t nand_lld_write_data(NANDDriver *nandp, const uint8_t *data, nandp->nand->PCR |= FSMC_PCR_ECCEN; } - dmaStartMemCopy(nandp->dma, nandp->dmamode, data, nandp->map_data, datalen); + dmaStartMemCopy(nandp->dma, nandp->dmamode, data, nandp->map_data, + datalen/AHB_TRANSACTION_WIDTH); nand_lld_suspend_thread(nandp); osalSysUnlock(); @@ -419,6 +488,26 @@ uint8_t nand_lld_write_data(NANDDriver *nandp, const uint8_t *data, } /** + * @brief Soft reset NAND device. + * + * @param[in] nandp pointer to the @p NANDDriver object + * + * @notapi + */ +void nand_lld_reset(NANDDriver *nandp) { + + nandp->state = NAND_RESET; + + set_16bit_bus(nandp); + nand_lld_write_cmd(nandp, NAND_CMD_RESET); + set_8bit_bus(nandp); + + osalSysLock(); + nand_lld_suspend_thread(nandp); + osalSysUnlock(); +} + +/** * @brief Erase block. * * @param[in] nandp pointer to the @p NANDDriver object @@ -433,10 +522,13 @@ uint8_t nand_lld_erase(NANDDriver *nandp, uint8_t *addr, size_t addrlen) { nandp->state = NAND_ERASE; - nand_lld_write_cmd (nandp, NAND_CMD_ERASE); + set_16bit_bus(nandp); + nand_lld_write_cmd(nandp, NAND_CMD_ERASE); nand_lld_write_addr(nandp, addr, addrlen); osalSysLock(); - nand_lld_write_cmd (nandp, NAND_CMD_ERASE_CONFIRM); + nand_lld_write_cmd(nandp, NAND_CMD_ERASE_CONFIRM); + set_8bit_bus(nandp); + nand_lld_suspend_thread(nandp); osalSysUnlock(); @@ -444,25 +536,6 @@ uint8_t nand_lld_erase(NANDDriver *nandp, uint8_t *addr, size_t addrlen) { } /** - * @brief Read data from NAND using polling approach. - * - * @detatils Use this function to read data when no waiting expected. For - * Example read status word after 0x70 command - * - * @param[in] nandp pointer to the @p NANDDriver object - * @param[out] data pointer to output buffer - * @param[in] len length of data to be read - * - * @notapi - */ -void nand_lld_polled_read_data(NANDDriver *nandp, uint8_t *data, size_t len) { - size_t i = 0; - - for (i=0; i<len; i++) - data[i] = nandp->map_data[i]; -} - -/** * @brief Send addres to NAND. * * @param[in] nandp pointer to the @p NANDDriver object @@ -501,12 +574,14 @@ void nand_lld_write_cmd(NANDDriver *nandp, uint8_t cmd) { */ uint8_t nand_lld_read_status(NANDDriver *nandp) { - uint8_t status[1] = {0x01}; /* presume worse */ + uint16_t status; + set_16bit_bus(nandp); nand_lld_write_cmd(nandp, NAND_CMD_STATUS); - nand_lld_polled_read_data(nandp, status, 1); + set_8bit_bus(nandp); + status = nandp->map_data[0]; - return status[0]; + return status & 0xFF; } #endif /* HAL_USE_NAND */ diff --git a/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.h b/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.h index 8dca42f..5266138 100644 --- a/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.h +++ b/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.h @@ -15,15 +15,15 @@ */ /** - * @file nand_lld.h + * @file hal_nand_lld.h * @brief NAND Driver subsystem low level driver header. * * @addtogroup NAND * @{ */ -#ifndef _NAND_LLD_H_ -#define _NAND_LLD_H_ +#ifndef HAL_NAND_LLD_H_ +#define HAL_NAND_LLD_H_ #include "hal_fsmc.h" #include "bitmap.h" @@ -120,10 +120,6 @@ #error "FSMC not present in the selected device" #endif -#if STM32_NAND_USE_EXT_INT && !HAL_USE_EXT -#error "External interrupt controller must be enabled to use this feature" -#endif - #if !defined(STM32_DMA_REQUIRED) #define STM32_DMA_REQUIRED #endif @@ -133,37 +129,21 @@ /*===========================================================================*/ /** - * @brief NAND driver condition flags type. - */ -typedef uint32_t nandflags_t; - -/** * @brief Type of a structure representing an NAND driver. */ typedef struct NANDDriver NANDDriver; /** - * @brief Type of interrupt handler function + * @brief Type of interrupt handler function. */ typedef void (*nandisrhandler_t)(NANDDriver *nandp); -#if STM32_NAND_USE_EXT_INT -/** - * @brief Type of function switching external interrupts on and off. - */ -typedef void (*nandisrswitch_t)(void); -#endif /* STM32_NAND_USE_EXT_INT */ - /** * @brief Driver configuration structure. * @note It could be empty on some architectures. */ typedef struct { /** - * @brief Pointer to lower level driver. - */ - //const FSMCDriver *fsmcp; - /** * @brief Number of erase blocks in NAND device. */ uint32_t blocks; @@ -197,16 +177,6 @@ typedef struct { * from STMicroelectronics. */ uint32_t pmem; -#if STM32_NAND_USE_EXT_INT - /** - * @brief Function enabling interrupts from EXTI - */ - nandisrswitch_t ext_nand_isr_enable; - /** - * @brief Function disabling interrupts from EXTI - */ - nandisrswitch_t ext_nand_isr_disable; -#endif /* STM32_NAND_USE_EXT_INT */ } NANDConfig; /** @@ -236,15 +206,15 @@ struct NANDDriver { #endif /* NAND_USE_MUTUAL_EXCLUSION */ /* End of the mandatory fields.*/ /** - * @brief Function enabling interrupts from FSMC + * @brief Function enabling interrupts from FSMC. */ nandisrhandler_t isr_handler; /** - * @brief Pointer to current transaction buffer + * @brief Pointer to current transaction buffer. */ - uint8_t *rxdata; + void *rxdata; /** - * @brief Current transaction length + * @brief Current transaction length in bytes. */ size_t datalen; /** @@ -266,15 +236,15 @@ struct NANDDriver { /** * @brief Memory mapping for data. */ - uint8_t *map_data; + uint16_t *map_data; /** * @brief Memory mapping for commands. */ - uint8_t *map_cmd; + uint16_t *map_cmd; /** * @brief Memory mapping for addresses. */ - uint8_t *map_addr; + uint16_t *map_addr; /** * @brief Pointer to bad block map. * @details One bit per block. All memory allocation is user's responsibility. @@ -304,21 +274,21 @@ extern "C" { void nand_lld_init(void); void nand_lld_start(NANDDriver *nandp); void nand_lld_stop(NANDDriver *nandp); - void nand_lld_read_data(NANDDriver *nandp, uint8_t *data, + uint8_t nand_lld_erase(NANDDriver *nandp, uint8_t *addr, size_t addrlen); + void nand_lld_read_data(NANDDriver *nandp, uint16_t *data, size_t datalen, uint8_t *addr, size_t addrlen, uint32_t *ecc); - void nand_lld_polled_read_data(NANDDriver *nandp, uint8_t *data, size_t len); void nand_lld_write_addr(NANDDriver *nandp, const uint8_t *addr, size_t len); void nand_lld_write_cmd(NANDDriver *nandp, uint8_t cmd); - uint8_t nand_lld_erase(NANDDriver *nandp, uint8_t *addr, size_t addrlen); - uint8_t nand_lld_write_data(NANDDriver *nandp, const uint8_t *data, + uint8_t nand_lld_write_data(NANDDriver *nandp, const uint16_t *data, size_t datalen, uint8_t *addr, size_t addrlen, uint32_t *ecc); uint8_t nand_lld_read_status(NANDDriver *nandp); + void nand_lld_reset(NANDDriver *nandp); #ifdef __cplusplus } #endif #endif /* HAL_USE_NAND */ -#endif /* _NAND_LLD_H_ */ +#endif /* HAL_NAND_LLD_H_ */ /** @} */ diff --git a/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.c b/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.c index e5f9a09..bffa472 100644 --- a/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.c +++ b/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.c @@ -15,11 +15,10 @@ */ /** - * @file stm32_ltdc.c + * @file hal_stm32_ltdc.c * @brief LCD-TFT Controller Driver. */ -#include "ch.h" #include "hal.h" #include "hal_stm32_ltdc.h" diff --git a/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.h b/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.h index 16b38ca..5db89e2 100644 --- a/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.h +++ b/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.h @@ -15,15 +15,15 @@ */ /** - * @file stm32_ltdc.h + * @file hal_stm32_ltdc.h * @brief LCD-TFT Controller Driver. * * @addtogroup ltdc * @{ */ -#ifndef _STM32_LTDC_H_ -#define _STM32_LTDC_H_ +#ifndef HAL_STM32_LTDC_H_ +#define HAL_STM32_LTDC_H_ /** * @brief Using the LTDC driver. @@ -731,6 +731,6 @@ extern "C" { #endif /* STM32_LTDC_USE_LTDC */ -#endif /* _STM32_LTDC_H_ */ +#endif /* HAL_STM32_LTDC_H_ */ /** @} */ diff --git a/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c b/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c index c04278e..ed4c5b8 100644 --- a/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c +++ b/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c @@ -1057,75 +1057,75 @@ void eicu_lld_stop(EICUDriver *eicup) { if (&EICUD1 == eicup) { nvicDisableVector(STM32_TIM1_UP_NUMBER); nvicDisableVector(STM32_TIM1_CC_NUMBER); - rccDisableTIM1(FALSE); + rccDisableTIM1(); } #endif #if STM32_EICU_USE_TIM2 if (&EICUD2 == eicup) { nvicDisableVector(STM32_TIM2_NUMBER); - rccDisableTIM2(FALSE); + rccDisableTIM2(); } #endif #if STM32_EICU_USE_TIM3 if (&EICUD3 == eicup) { nvicDisableVector(STM32_TIM3_NUMBER); - rccDisableTIM3(FALSE); + rccDisableTIM3(); } #endif #if STM32_EICU_USE_TIM4 if (&EICUD4 == eicup) { nvicDisableVector(STM32_TIM4_NUMBER); - rccDisableTIM4(FALSE); + rccDisableTIM4(); } #endif #if STM32_EICU_USE_TIM5 if (&EICUD5 == eicup) { nvicDisableVector(STM32_TIM5_NUMBER); - rccDisableTIM5(FALSE); + rccDisableTIM5(); } #endif #if STM32_EICU_USE_TIM8 if (&EICUD8 == eicup) { nvicDisableVector(STM32_TIM8_UP_NUMBER); nvicDisableVector(STM32_TIM8_CC_NUMBER); - rccDisableTIM8(FALSE); + rccDisableTIM8(); } #endif #if STM32_EICU_USE_TIM9 if (&EICUD9 == eicup) { nvicDisableVector(STM32_TIM9_NUMBER); - rccDisableTIM9(FALSE); + rccDisableTIM9(); } #endif #if STM32_EICU_USE_TIM12 if (&EICUD12 == eicup) { nvicDisableVector(STM32_TIM12_NUMBER); - rccDisableTIM12(FALSE); + rccDisableTIM12(); } #endif } #if STM32_EICU_USE_TIM10 if (&EICUD10 == eicup) { nvicDisableVector(STM32_TIM10_NUMBER); - rccDisableTIM10(FALSE); + rccDisableTIM10(); } #endif #if STM32_EICU_USE_TIM11 if (&EICUD11 == eicup) { nvicDisableVector(STM32_TIM11_NUMBER); - rccDisableTIM11(FALSE); + rccDisableTIM11(); } #endif #if STM32_EICU_USE_TIM13 if (&EICUD13 == eicup) { nvicDisableVector(STM32_TIM13_NUMBER); - rccDisableTIM13(FALSE); + rccDisableTIM13(); } #endif #if STM32_EICU_USE_TIM14 if (&EICUD14 == eicup) { nvicDisableVector(STM32_TIM14_NUMBER); - rccDisableTIM14(FALSE); + rccDisableTIM14(); } #endif } diff --git a/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.h b/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.h index 927eb6f..e72098e 100644 --- a/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.h +++ b/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.h @@ -22,8 +22,8 @@ 32-bit timers and timers with single capture/compare channels. */ -#ifndef __EICU_LLD_H -#define __EICU_LLD_H +#ifndef HAL_EICU_LLD_H +#define HAL_EICU_LLD_H #include "stm32_tim.h" @@ -551,4 +551,4 @@ extern "C" { #endif /* HAL_USE_EICU */ -#endif /* __EICU_LLD_H */ +#endif /* HAL_EICU_LLD_H */ diff --git a/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c b/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c index ea051f7..e07b946 100644 --- a/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c +++ b/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c @@ -150,6 +150,8 @@ void qei_lld_init(void) { * @notapi
*/
void qei_lld_start(QEIDriver *qeip) {
+ osalDbgAssert((qeip->config->min == 0) || (qeip->config->max == 0),
+ "only min/max set to 0 is supported");
if (qeip->state == QEI_STOP) {
/* Clock activation and timer reset.*/
@@ -192,24 +194,24 @@ void qei_lld_start(QEIDriver *qeip) { #endif
}
/* Timer configuration.*/
- qeip->tim->CR1 = 0; /* Initially stopped. */
+ qeip->tim->CR1 = 0; /* Initially stopped. */
qeip->tim->CR2 = 0;
qeip->tim->PSC = 0;
qeip->tim->DIER = 0;
- qeip->tim->ARR = 0xFFFF;
+ qeip->tim->ARR = 0xFFFF;
/* Set Capture Compare 1 and Capture Compare 2 as input. */
qeip->tim->CCMR1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0;
if (qeip->config->mode == QEI_MODE_QUADRATURE) {
if (qeip->config->resolution == QEI_BOTH_EDGES)
- qeip->tim->SMCR = TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0;
+ qeip->tim->SMCR = TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0;
else
- qeip->tim->SMCR = TIM_SMCR_SMS_0;
+ qeip->tim->SMCR = TIM_SMCR_SMS_0;
} else {
/* Direction/Clock mode.
* Direction input on TI1, Clock input on TI2. */
- qeip->tim->SMCR = TIM_SMCR_SMS_0;
+ qeip->tim->SMCR = TIM_SMCR_SMS_0;
}
if (qeip->config->dirinv == QEI_DIRINV_TRUE)
@@ -228,38 +230,38 @@ void qei_lld_start(QEIDriver *qeip) { void qei_lld_stop(QEIDriver *qeip) {
if (qeip->state == QEI_READY) {
- qeip->tim->CR1 = 0; /* Timer disabled. */
+ qeip->tim->CR1 = 0; /* Timer disabled. */
/* Clock deactivation.*/
#if STM32_QEI_USE_TIM1
if (&QEID1 == qeip) {
- rccDisableTIM1(FALSE);
+ rccDisableTIM1();
}
#endif
#if STM32_QEI_USE_TIM2
if (&QEID2 == qeip) {
- rccDisableTIM2(FALSE);
+ rccDisableTIM2();
}
#endif
#if STM32_QEI_USE_TIM3
if (&QEID3 == qeip) {
- rccDisableTIM3(FALSE);
+ rccDisableTIM3();
}
#endif
#if STM32_QEI_USE_TIM4
if (&QEID4 == qeip) {
- rccDisableTIM4(FALSE);
+ rccDisableTIM4();
}
#endif
#if STM32_QEI_USE_TIM5
if (&QEID5 == qeip) {
- rccDisableTIM5(FALSE);
+ rccDisableTIM5();
}
#endif
}
#if STM32_QEI_USE_TIM8
if (&QEID8 == qeip) {
- rccDisableTIM8(FALSE);
+ rccDisableTIM8();
}
#endif
}
@@ -273,7 +275,7 @@ void qei_lld_stop(QEIDriver *qeip) { */
void qei_lld_enable(QEIDriver *qeip) {
- qeip->tim->CR1 = TIM_CR1_CEN; /* Timer enabled. */
+ qeip->tim->CR1 = TIM_CR1_CEN; /* Timer enabled. */
}
/**
@@ -285,7 +287,7 @@ void qei_lld_enable(QEIDriver *qeip) { */
void qei_lld_disable(QEIDriver *qeip) {
- qeip->tim->CR1 = 0; /* Timer disabled. */
+ qeip->tim->CR1 = 0; /* Timer disabled. */
}
#endif /* HAL_USE_QEI */
diff --git a/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.h b/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.h index d0cb683..73468f5 100644 --- a/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.h +++ b/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.h @@ -33,6 +33,16 @@ /* Driver constants. */
/*===========================================================================*/
+/**
+ * @brief Mininum usable value for defining counter underflow
+ */
+#define QEI_COUNT_MIN (0)
+
+/**
+ * @brief Maximum usable value for defining counter overflow
+ */
+#define QEI_COUNT_MAX (65535)
+
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
@@ -172,6 +182,56 @@ #error "QEI driver activated but no TIM peripheral assigned"
#endif
+/* Checks on allocation of TIMx units.*/
+#if STM32_QEI_USE_TIM1
+#if defined(STM32_TIM1_IS_USED)
+#error "QEID1 requires TIM1 but the timer is already used"
+#else
+#define STM32_TIM1_IS_USED
+#endif
+#endif
+
+#if STM32_QEI_USE_TIM2
+#if defined(STM32_TIM2_IS_USED)
+#error "QEID2 requires TIM2 but the timer is already used"
+#else
+#define STM32_TIM2_IS_USED
+#endif
+#endif
+
+#if STM32_QEI_USE_TIM3
+#if defined(STM32_TIM3_IS_USED)
+#error "QEID3 requires TIM3 but the timer is already used"
+#else
+#define STM32_TIM3_IS_USED
+#endif
+#endif
+
+#if STM32_QEI_USE_TIM4
+#if defined(STM32_TIM4_IS_USED)
+#error "QEID4 requires TIM4 but the timer is already used"
+#else
+#define STM32_TIM4_IS_USED
+#endif
+#endif
+
+#if STM32_QEI_USE_TIM5
+#if defined(STM32_TIM5_IS_USED)
+#error "QEID5 requires TIM5 but the timer is already used"
+#else
+#define STM32_TIM5_IS_USED
+#endif
+#endif
+
+#if STM32_QEI_USE_TIM8
+#if defined(STM32_TIM8_IS_USED)
+#error "QEID8 requires TIM8 but the timer is already used"
+#else
+#define STM32_TIM8_IS_USED
+#endif
+#endif
+
+/* IRQ priority checks.*/
#if STM32_QEI_USE_TIM1 && \
!OSAL_IRQ_IS_VALID_PRIORITY(STM32_QEI_TIM1_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to TIM1"
@@ -202,6 +262,14 @@ #error "Invalid IRQ priority assigned to TIM8"
#endif
+#if QEI_USE_OVERFLOW_DISCARD
+#error "QEI_USE_OVERFLOW_DISCARD not supported by this driver"
+#endif
+
+#if QEI_USE_OVERFLOW_MINMAX
+#error "QEI_USE_OVERFLOW_MINMAX not supported by this driver"
+#endif
+
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
@@ -233,7 +301,7 @@ typedef enum { /**
* @brief QEI counter type.
*/
-typedef uint16_t qeicnt_t;
+typedef int16_t qeicnt_t;
/**
* @brief QEI delta type.
@@ -257,6 +325,45 @@ typedef struct { * @brief Direction inversion.
*/
qeidirinv_t dirinv;
+ /**
+ * @brief Handling of counter overflow/underflow
+ *
+ * @details When overflow occurs, the counter value is updated
+ * according to:
+ * - QEI_OVERFLOW_DISCARD:
+ * discard the update value, counter doesn't change
+ */
+ qeioverflow_t overflow;
+ /**
+ * @brief Min count value.
+ *
+ * @note If min == max, then QEI_COUNT_MIN is used.
+ *
+ * @note Only min set to 0 / QEI_COUNT_MIN is supported.
+ */
+ qeicnt_t min;
+ /**
+ * @brief Max count value.
+ *
+ * @note If min == max, then QEI_COUNT_MAX is used.
+ *
+ * @note Only max set to 0 / QEI_COUNT_MAX is supported.
+ */
+ qeicnt_t max;
+ /**
+ * @brief Notify of value change
+ *
+ * @note Called from ISR context.
+ */
+ qeicallback_t notify_cb;
+ /**
+ * @brief Notify of overflow
+ *
+ * @note Overflow notification is performed after
+ * value changed notification.
+ * @note Called from ISR context.
+ */
+ void (*overflow_cb)(QEIDriver *qeip, qeidelta_t delta);
/* End of the mandatory fields.*/
} QEIConfig;
@@ -300,6 +407,16 @@ struct QEIDriver { */
#define qei_lld_get_count(qeip) ((qeip)->tim->CNT)
+/**
+ * @brief Set the counter value.
+ *
+ * @param[in] qeip pointer to the @p QEIDriver object
+ * @param[in] qeip counter value
+ *
+ * @notapi
+ */
+#define qei_lld_set_count(qeip, value)
+
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
diff --git a/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c b/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c index 8ab6176..d95c6a3 100644 --- a/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c +++ b/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c @@ -24,14 +24,13 @@ /** - * @file STM32/timcap_lld.c + * @file STM32/hal_timcap_lld.c * @brief STM32 TIMCAP subsystem low level driver header. * * @addtogroup TIMCAP * @{ */ -#include "ch.h" #include "hal.h" #if HAL_USE_TIMCAP || defined(__DOXYGEN__) @@ -714,44 +713,44 @@ void timcap_lld_stop(TIMCAPDriver *timcapp) { if (&TIMCAPD1 == timcapp) { nvicDisableVector(STM32_TIM1_UP_NUMBER); nvicDisableVector(STM32_TIM1_CC_NUMBER); - rccDisableTIM1(FALSE); + rccDisableTIM1(); } #endif #if STM32_TIMCAP_USE_TIM2 if (&TIMCAPD2 == timcapp) { nvicDisableVector(STM32_TIM2_NUMBER); - rccDisableTIM2(FALSE); + rccDisableTIM2(); } #endif #if STM32_TIMCAP_USE_TIM3 if (&TIMCAPD3 == timcapp) { nvicDisableVector(STM32_TIM3_NUMBER); - rccDisableTIM3(FALSE); + rccDisableTIM3(); } #endif #if STM32_TIMCAP_USE_TIM4 if (&TIMCAPD4 == timcapp) { nvicDisableVector(STM32_TIM4_NUMBER); - rccDisableTIM4(FALSE); + rccDisableTIM4(); } #endif #if STM32_TIMCAP_USE_TIM5 if (&TIMCAPD5 == timcapp) { nvicDisableVector(STM32_TIM5_NUMBER); - rccDisableTIM5(FALSE); + rccDisableTIM5(); } #endif #if STM32_TIMCAP_USE_TIM8 if (&TIMCAPD8 == timcapp) { nvicDisableVector(STM32_TIM8_UP_NUMBER); nvicDisableVector(STM32_TIM8_CC_NUMBER); - rccDisableTIM8(FALSE); + rccDisableTIM8(); } #endif #if STM32_TIMCAP_USE_TIM9 if (&TIMCAPD9 == timcapp) { nvicDisableVector(STM32_TIM9_NUMBER); - rccDisableTIM9(FALSE); + rccDisableTIM9(); } #endif } diff --git a/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.h b/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.h index d39c438..621313a 100644 --- a/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.h +++ b/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.h @@ -22,10 +22,9 @@ * @{ */ -#ifndef _TIMCAP_LLD_H_ -#define _TIMCAP_LLD_H_ +#ifndef HAL_TIMCAP_LLD_H_ +#define HAL_TIMCAP_LLD_H_ -#include "ch.h" #include "hal.h" #include "stm32_tim.h" diff --git a/os/hal/ports/STM32/LLD/USBHv1/hal_stm32_otg.h b/os/hal/ports/STM32/LLD/USBHv1/hal_stm32_otg.h deleted file mode 100644 index ca2dc49..0000000 --- a/os/hal/ports/STM32/LLD/USBHv1/hal_stm32_otg.h +++ /dev/null @@ -1,929 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file stm32_otg.h - * @brief STM32 OTG registers layout header. - * - * @addtogroup USB - * @{ - */ - - -#ifndef _STM32_OTG_H_ -#define _STM32_OTG_H_ - -/** - * @brief Number of the implemented endpoints in OTG_FS. - * @details This value does not include the endpoint 0 that is always present. - */ -#define STM32_OTG1_ENDOPOINTS_NUMBER 3 - -/** - * @brief Number of the implemented endpoints in OTG_HS. - * @details This value does not include the endpoint 0 that is always present. - */ -#define STM32_OTG2_ENDOPOINTS_NUMBER 5 - -/** - * @brief OTG_FS FIFO memory size in words. - */ -#define STM32_OTG1_FIFO_MEM_SIZE 320 - -/** - * @brief OTG_HS FIFO memory size in words. - */ -#define STM32_OTG2_FIFO_MEM_SIZE 1024 - -/** - * @brief Host channel registers group. - */ -typedef struct { - volatile uint32_t HCCHAR; /**< @brief Host channel characteristics - register. */ - volatile uint32_t resvd8; - volatile uint32_t HCINT; /**< @brief Host channel interrupt register.*/ - volatile uint32_t HCINTMSK; /**< @brief Host channel interrupt mask - register. */ - volatile uint32_t HCTSIZ; /**< @brief Host channel transfer size - register. */ - volatile uint32_t resvd14; - volatile uint32_t resvd18; - volatile uint32_t resvd1c; -} stm32_otg_host_chn_t; - -/** - * @brief Device input endpoint registers group. - */ -typedef struct { - volatile uint32_t DIEPCTL; /**< @brief Device control IN endpoint - control register. */ - volatile uint32_t resvd4; - volatile uint32_t DIEPINT; /**< @brief Device IN endpoint interrupt - register. */ - volatile uint32_t resvdC; - volatile uint32_t DIEPTSIZ; /**< @brief Device IN endpoint transfer size - register. */ - volatile uint32_t resvd14; - volatile uint32_t DTXFSTS; /**< @brief Device IN endpoint transmit FIFO - status register. */ - volatile uint32_t resvd1C; -} stm32_otg_in_ep_t; - -/** - * @brief Device output endpoint registers group. - */ -typedef struct { - volatile uint32_t DOEPCTL; /**< @brief Device control OUT endpoint - control register. */ - volatile uint32_t resvd4; - volatile uint32_t DOEPINT; /**< @brief Device OUT endpoint interrupt - register. */ - volatile uint32_t resvdC; - volatile uint32_t DOEPTSIZ; /**< @brief Device OUT endpoint transfer - size register. */ - volatile uint32_t resvd14; - volatile uint32_t resvd18; - volatile uint32_t resvd1C; -} stm32_otg_out_ep_t; - -/** - * @brief USB registers memory map. - */ -typedef struct { - volatile uint32_t GOTGCTL; /**< @brief OTG control and status register.*/ - volatile uint32_t GOTGINT; /**< @brief OTG interrupt register. */ - volatile uint32_t GAHBCFG; /**< @brief AHB configuration register. */ - volatile uint32_t GUSBCFG; /**< @brief USB configuration register. */ - volatile uint32_t GRSTCTL; /**< @brief Reset register size. */ - volatile uint32_t GINTSTS; /**< @brief Interrupt register. */ - volatile uint32_t GINTMSK; /**< @brief Interrupt mask register. */ - volatile uint32_t GRXSTSR; /**< @brief Receive status debug read - register. */ - volatile uint32_t GRXSTSP; /**< @brief Receive status read/pop - register. */ - volatile uint32_t GRXFSIZ; /**< @brief Receive FIFO size register. */ - volatile uint32_t DIEPTXF0; /**< @brief Endpoint 0 transmit FIFO size - register. */ - volatile uint32_t HNPTXSTS; /**< @brief Non-periodic transmit FIFO/queue - status register. */ - volatile uint32_t resvd30; - volatile uint32_t resvd34; - volatile uint32_t GCCFG; /**< @brief General core configuration. */ - volatile uint32_t CID; /**< @brief Core ID register. */ - volatile uint32_t resvd58[48]; - volatile uint32_t HPTXFSIZ; /**< @brief Host periodic transmit FIFO size - register. */ - volatile uint32_t DIEPTXF[15];/**< @brief Device IN endpoint transmit FIFO - size registers. */ - volatile uint32_t resvd140[176]; - volatile uint32_t HCFG; /**< @brief Host configuration register. */ - volatile uint32_t HFIR; /**< @brief Host frame interval register. */ - volatile uint32_t HFNUM; /**< @brief Host frame number/frame time - Remaining register. */ - volatile uint32_t resvd40C; - volatile uint32_t HPTXSTS; /**< @brief Host periodic transmit FIFO/queue - status register. */ - volatile uint32_t HAINT; /**< @brief Host all channels interrupt - register. */ - volatile uint32_t HAINTMSK; /**< @brief Host all channels interrupt mask - register. */ - volatile uint32_t resvd41C[9]; - volatile uint32_t HPRT; /**< @brief Host port control and status - register. */ - volatile uint32_t resvd444[47]; - stm32_otg_host_chn_t hc[16]; /**< @brief Host channels array. */ - volatile uint32_t resvd700[64]; - volatile uint32_t DCFG; /**< @brief Device configuration register. */ - volatile uint32_t DCTL; /**< @brief Device control register. */ - volatile uint32_t DSTS; /**< @brief Device status register. */ - volatile uint32_t resvd80C; - volatile uint32_t DIEPMSK; /**< @brief Device IN endpoint common - interrupt mask register. */ - volatile uint32_t DOEPMSK; /**< @brief Device OUT endpoint common - interrupt mask register. */ - volatile uint32_t DAINT; /**< @brief Device all endpoints interrupt - register. */ - volatile uint32_t DAINTMSK; /**< @brief Device all endpoints interrupt - mask register. */ - volatile uint32_t resvd820; - volatile uint32_t resvd824; - volatile uint32_t DVBUSDIS; /**< @brief Device VBUS discharge time - register. */ - volatile uint32_t DVBUSPULSE; /**< @brief Device VBUS pulsing time - register. */ - volatile uint32_t resvd830; - volatile uint32_t DIEPEMPMSK; /**< @brief Device IN endpoint FIFO empty - interrupt mask register. */ - volatile uint32_t resvd838; - volatile uint32_t resvd83C; - volatile uint32_t resvd840[16]; - volatile uint32_t resvd880[16]; - volatile uint32_t resvd8C0[16]; - stm32_otg_in_ep_t ie[16]; /**< @brief Input endpoints. */ - stm32_otg_out_ep_t oe[16]; /**< @brief Output endpoints. */ - volatile uint32_t resvdD00[64]; - volatile uint32_t PCGCCTL; /**< @brief Power and clock gating control - register. */ - volatile uint32_t resvdE04[127]; - volatile uint32_t FIFO[16][1024]; -} stm32_otg_t; - -/** - * @name GOTGCTL register bit definitions - * @{ - */ -#define GOTGCTL_BSVLD (1U<<19) /**< B-Session Valid. */ -#define GOTGCTL_ASVLD (1U<<18) /**< A-Session Valid. */ -#define GOTGCTL_DBCT (1U<<17) /**< Long/Short debounce time. */ -#define GOTGCTL_CIDSTS (1U<<16) /**< Connector ID status. */ -#define GOTGCTL_EHEN (1U<<12) -#define GOTGCTL_DHNPEN (1U<<11) /**< Device HNP enabled. */ -#define GOTGCTL_HSHNPEN (1U<<10) /**< Host Set HNP enable. */ -#define GOTGCTL_HNPRQ (1U<<9) /**< HNP request. */ -#define GOTGCTL_HNGSCS (1U<<8) /**< Host negotiation success. */ -#define GOTGCTL_BVALOVAL (1U<<7) -#define GOTGCTL_BVALOEN (1U<<6) -#define GOTGCTL_AVALOVAL (1U<<5) -#define GOTGCTL_AVALOEN (1U<<4) -#define GOTGCTL_VBVALOVAL (1U<<3) -#define GOTGCTL_VBVALOEN (1U<<2) -#define GOTGCTL_SRQ (1U<<1) /**< Session request. */ -#define GOTGCTL_SRQSCS (1U<<0) /**< Session request success. */ -/** @} */ - -/** - * @name GOTGINT register bit definitions - * @{ - */ -#define GOTGINT_DBCDNE (1U<<19) /**< Debounce done. */ -#define GOTGINT_ADTOCHG (1U<<18) /**< A-Device timeout change. */ -#define GOTGINT_HNGDET (1U<<17) /**< Host negotiation detected. */ -#define GOTGINT_HNSSCHG (1U<<9) /**< Host negotiation success - status change. */ -#define GOTGINT_SRSSCHG (1U<<8) /**< Session request success - status change. */ -#define GOTGINT_SEDET (1U<<2) /**< Session end detected. */ -/** @} */ - -/** - * @name GAHBCFG register bit definitions - * @{ - */ -#define GAHBCFG_PTXFELVL (1U<<8) /**< Periodic TxFIFO empty - level. */ -#define GAHBCFG_TXFELVL (1U<<7) /**< Non-periodic TxFIFO empty - level. */ -#define GAHBCFG_DMAEN (1U<<5) /**< DMA enable (HS only). */ -#define GAHBCFG_HBSTLEN_MASK (15U<<1) /**< Burst length/type mask (HS - only). */ -#define GAHBCFG_HBSTLEN(n) ((n)<<1) /**< Burst length/type (HS - only). */ -#define GAHBCFG_GINTMSK (1U<<0) /**< Global interrupt mask. */ -/** @} */ - -/** - * @name GUSBCFG register bit definitions - * @{ - */ -#define GUSBCFG_CTXPKT (1U<<31) /**< Corrupt Tx packet. */ -#define GUSBCFG_FDMOD (1U<<30) /**< Force Device Mode. */ -#define GUSBCFG_FHMOD (1U<<29) /**< Force Host Mode. */ -#define GUSBCFG_TRDT_MASK (15U<<10) /**< USB Turnaround time field - mask. */ -#define GUSBCFG_TRDT(n) ((n)<<10) /**< USB Turnaround time field - value. */ -#define GUSBCFG_HNPCAP (1U<<9) /**< HNP-Capable. */ -#define GUSBCFG_SRPCAP (1U<<8) /**< SRP-Capable. */ -#define GUSBCFG_PHYSEL (1U<<6) /**< USB 2.0 High-Speed PHY or - USB 1.1 Full-Speed serial - transceiver Select. */ -#define GUSBCFG_TOCAL_MASK (7U<<0) /**< HS/FS timeout calibration - field mask. */ -#define GUSBCFG_TOCAL(n) ((n)<<0) /**< HS/FS timeout calibration - field value. */ -/** @} */ - -/** - * @name GRSTCTL register bit definitions - * @{ - */ -#define GRSTCTL_AHBIDL (1U<<31) /**< AHB Master Idle. */ -#define GRSTCTL_TXFNUM_MASK (31U<<6) /**< TxFIFO number field mask. */ -#define GRSTCTL_TXFNUM(n) ((n)<<6) /**< TxFIFO number field value. */ -#define GRSTCTL_TXFFLSH (1U<<5) /**< TxFIFO flush. */ -#define GRSTCTL_RXFFLSH (1U<<4) /**< RxFIFO flush. */ -#define GRSTCTL_FCRST (1U<<2) /**< Host frame counter reset. */ -#define GRSTCTL_HSRST (1U<<1) /**< HClk soft reset. */ -#define GRSTCTL_CSRST (1U<<0) /**< Core soft reset. */ -/** @} */ - -/** - * @name GINTSTS register bit definitions - * @{ - */ -#define GINTSTS_WKUPINT (1U<<31) /**< Resume/Remote wakeup - detected interrupt. */ -#define GINTSTS_SRQINT (1U<<30) /**< Session request/New session - detected interrupt. */ -#define GINTSTS_DISCINT (1U<<29) /**< Disconnect detected - interrupt. */ -#define GINTSTS_CIDSCHG (1U<<28) /**< Connector ID status change.*/ -#define GINTSTS_PTXFE (1U<<26) /**< Periodic TxFIFO empty. */ -#define GINTSTS_HCINT (1U<<25) /**< Host channels interrupt. */ -#define GINTSTS_HPRTINT (1U<<24) /**< Host port interrupt. */ -#define GINTSTS_IPXFR (1U<<21) /**< Incomplete periodic - transfer. */ -#define GINTSTS_IISOOXFR (1U<<21) /**< Incomplete isochronous OUT - transfer. */ -#define GINTSTS_IISOIXFR (1U<<20) /**< Incomplete isochronous IN - transfer. */ -#define GINTSTS_OEPINT (1U<<19) /**< OUT endpoints interrupt. */ -#define GINTSTS_IEPINT (1U<<18) /**< IN endpoints interrupt. */ -#define GINTSTS_EOPF (1U<<15) /**< End of periodic frame - interrupt. */ -#define GINTSTS_ISOODRP (1U<<14) /**< Isochronous OUT packet - dropped interrupt. */ -#define GINTSTS_ENUMDNE (1U<<13) /**< Enumeration done. */ -#define GINTSTS_USBRST (1U<<12) /**< USB reset. */ -#define GINTSTS_USBSUSP (1U<<11) /**< USB suspend. */ -#define GINTSTS_ESUSP (1U<<10) /**< Early suspend. */ -#define GINTSTS_GONAKEFF (1U<<7) /**< Global OUT NAK effective. */ -#define GINTSTS_GINAKEFF (1U<<6) /**< Global IN non-periodic NAK - effective. */ -#define GINTSTS_NPTXFE (1U<<5) /**< Non-periodic TxFIFO empty. */ -#define GINTSTS_RXFLVL (1U<<4) /**< RxFIFO non-empty. */ -#define GINTSTS_SOF (1U<<3) /**< Start of frame. */ -#define GINTSTS_OTGINT (1U<<2) /**< OTG interrupt. */ -#define GINTSTS_MMIS (1U<<1) /**< Mode Mismatch interrupt. */ -#define GINTSTS_CMOD (1U<<0) /**< Current mode of operation. */ -/** @} */ - -/** - * @name GINTMSK register bit definitions - * @{ - */ -#define GINTMSK_WKUM (1U<<31) /**< Resume/remote wakeup - detected interrupt mask. */ -#define GINTMSK_SRQM (1U<<30) /**< Session request/New session - detected interrupt mask. */ -#define GINTMSK_DISCM (1U<<29) /**< Disconnect detected - interrupt mask. */ -#define GINTMSK_CIDSCHGM (1U<<28) /**< Connector ID status change - mask. */ -#define GINTMSK_PTXFEM (1U<<26) /**< Periodic TxFIFO empty mask.*/ -#define GINTMSK_HCM (1U<<25) /**< Host channels interrupt - mask. */ -#define GINTMSK_HPRTM (1U<<24) /**< Host port interrupt mask. */ -#define GINTMSK_IPXFRM (1U<<21) /**< Incomplete periodic - transfer mask. */ -#define GINTMSK_IISOOXFRM (1U<<21) /**< Incomplete isochronous OUT - transfer mask. */ -#define GINTMSK_IISOIXFRM (1U<<20) /**< Incomplete isochronous IN - transfer mask. */ -#define GINTMSK_OEPM (1U<<19) /**< OUT endpoints interrupt - mask. */ -#define GINTMSK_IEPM (1U<<18) /**< IN endpoints interrupt - mask. */ -#define GINTMSK_EOPFM (1U<<15) /**< End of periodic frame - interrupt mask. */ -#define GINTMSK_ISOODRPM (1U<<14) /**< Isochronous OUT packet - dropped interrupt mask. */ -#define GINTMSK_ENUMDNEM (1U<<13) /**< Enumeration done mask. */ -#define GINTMSK_USBRSTM (1U<<12) /**< USB reset mask. */ -#define GINTMSK_USBSUSPM (1U<<11) /**< USB suspend mask. */ -#define GINTMSK_ESUSPM (1U<<10) /**< Early suspend mask. */ -#define GINTMSK_GONAKEFFM (1U<<7) /**< Global OUT NAK effective - mask. */ -#define GINTMSK_GINAKEFFM (1U<<6) /**< Global non-periodic IN NAK - effective mask. */ -#define GINTMSK_NPTXFEM (1U<<5) /**< Non-periodic TxFIFO empty - mask. */ -#define GINTMSK_RXFLVLM (1U<<4) /**< Receive FIFO non-empty - mask. */ -#define GINTMSK_SOFM (1U<<3) /**< Start of (micro)frame mask.*/ -#define GINTMSK_OTGM (1U<<2) /**< OTG interrupt mask. */ -#define GINTMSK_MMISM (1U<<1) /**< Mode Mismatch interrupt - mask. */ -/** @} */ - -/** - * @name GRXSTSR register bit definitions - * @{ - */ -#define GRXSTSR_PKTSTS_MASK (15U<<17) /**< Packet status mask. */ -#define GRXSTSR_PKTSTS(n) ((n)<<17) /**< Packet status value. */ -#define GRXSTSR_OUT_GLOBAL_NAK GRXSTSR_PKTSTS(1) -#define GRXSTSR_OUT_DATA GRXSTSR_PKTSTS(2) -#define GRXSTSR_OUT_COMP GRXSTSR_PKTSTS(3) -#define GRXSTSR_SETUP_COMP GRXSTSR_PKTSTS(4) -#define GRXSTSR_SETUP_DATA GRXSTSR_PKTSTS(6) -#define GRXSTSR_DPID_MASK (3U<<15) /**< Data PID mask. */ -#define GRXSTSR_DPID(n) ((n)<<15) /**< Data PID value. */ -#define GRXSTSR_BCNT_MASK (0x7FF<<4) /**< Byte count mask. */ -#define GRXSTSR_BCNT(n) ((n)<<4) /**< Byte count value. */ -#define GRXSTSR_CHNUM_MASK (15U<<0) /**< Channel number mask. */ -#define GRXSTSR_CHNUM(n) ((n)<<0) /**< Channel number value. */ -#define GRXSTSR_EPNUM_MASK (15U<<0) /**< Endpoint number mask. */ -#define GRXSTSR_EPNUM(n) ((n)<<0) /**< Endpoint number value. */ -/** @} */ - -/** - * @name GRXSTSP register bit definitions - * @{ - */ -#define GRXSTSP_PKTSTS_MASK (15<<17) /**< Packet status mask. */ -#define GRXSTSP_PKTSTS(n) ((n)<<17) /**< Packet status value. */ -#define GRXSTSP_OUT_GLOBAL_NAK GRXSTSP_PKTSTS(1) -#define GRXSTSP_OUT_DATA GRXSTSP_PKTSTS(2) -#define GRXSTSP_OUT_COMP GRXSTSP_PKTSTS(3) -#define GRXSTSP_SETUP_COMP GRXSTSP_PKTSTS(4) -#define GRXSTSP_SETUP_DATA GRXSTSP_PKTSTS(6) -#define GRXSTSP_DPID_MASK (3U<<15) /**< Data PID mask. */ -#define GRXSTSP_DPID(n) ((n)<<15) /**< Data PID value. */ -#define GRXSTSP_BCNT_MASK (0x7FF<<4) /**< Byte count mask. */ -#define GRXSTSP_BCNT_OFF 4 /**< Byte count offset. */ -#define GRXSTSP_BCNT(n) ((n)<<4) /**< Byte count value. */ -#define GRXSTSP_CHNUM_MASK (15U<<0) /**< Channel number mask. */ -#define GRXSTSP_CHNUM(n) ((n)<<0) /**< Channel number value. */ -#define GRXSTSP_EPNUM_MASK (15U<<0) /**< Endpoint number mask. */ -#define GRXSTSP_EPNUM_OFF 0 /**< Endpoint number offset. */ -#define GRXSTSP_EPNUM(n) ((n)<<0) /**< Endpoint number value. */ -/** @} */ - -/** - * @name GRXFSIZ register bit definitions - * @{ - */ -#define GRXFSIZ_RXFD_MASK (0xFFFF<<0) /**< RxFIFO depth mask. */ -#define GRXFSIZ_RXFD(n) ((n)<<0) /**< RxFIFO depth value. */ -/** @} */ - -/** - * @name DIEPTXFx register bit definitions - * @{ - */ -#define DIEPTXF_INEPTXFD_MASK (0xFFFFU<<16)/**< IN endpoint TxFIFO depth - mask. */ -#define DIEPTXF_INEPTXFD(n) ((n)<<16) /**< IN endpoint TxFIFO depth - value. */ -#define DIEPTXF_INEPTXSA_MASK (0xFFFF<<0) /**< IN endpoint FIFOx transmit - RAM start address mask. */ -#define DIEPTXF_INEPTXSA(n) ((n)<<0) /**< IN endpoint FIFOx transmit - RAM start address value. */ -/** @} */ - -/** - * @name GCCFG register bit definitions - * @{ - */ -#define GCCFG_NOVBUSSENS (1U<<21) /**< VBUS sensing disable. */ -#define GCCFG_SOFOUTEN (1U<<20) /**< SOF output enable. */ -#define GCCFG_VBUSBSEN (1U<<19) /**< Enable the VBUS sensing "B" - device. */ -#define GCCFG_VBUSASEN (1U<<18) /**< Enable the VBUS sensing "A" - device. */ -#define GCCFG_PWRDWN (1U<<16) /**< Power down. */ -/** @} */ - -/** - * @name HPTXFSIZ register bit definitions - * @{ - */ -#define HPTXFSIZ_PTXFD_MASK (0xFFFFU<<16)/**< Host periodic TxFIFO - depth mask. */ -#define HPTXFSIZ_PTXFD(n) ((n)<<16) /**< Host periodic TxFIFO - depth value. */ -#define HPTXFSIZ_PTXSA_MASK (0xFFFFU<<0)/**< Host periodic TxFIFO - Start address mask. */ -#define HPTXFSIZ_PTXSA(n) ((n)<<0) /**< Host periodic TxFIFO - start address value. */ -/** @} */ - -/** - * @name HCFG register bit definitions - * @{ - */ -#define HCFG_FSLSS (1U<<2) /**< FS- and LS-only support. */ -#define HCFG_FSLSPCS_MASK (3U<<0) /**< FS/LS PHY clock select - mask. */ -#define HCFG_FSLSPCS_48 (1U<<0) /**< PHY clock is running at - 48 MHz. */ -#define HCFG_FSLSPCS_6 (2U<<0) /**< PHY clock is running at - 6 MHz. */ -/** @} */ - -/** - * @name HFIR register bit definitions - * @{ - */ -#define HFIR_FRIVL_MASK (0xFFFFU<<0)/**< Frame interval mask. */ -#define HFIR_FRIVL(n) ((n)<<0) /**< Frame interval value. */ -/** @} */ - -/** - * @name HFNUM register bit definitions - * @{ - */ -#define HFNUM_FTREM_MASK (0xFFFFU<<16)/**< Frame time Remaining mask.*/ -#define HFNUM_FTREM(n) ((n)<<16) /**< Frame time Remaining value.*/ -#define HFNUM_FRNUM_MASK (0xFFFFU<<0)/**< Frame number mask. */ -#define HFNUM_FRNUM(n) ((n)<<0) /**< Frame number value. */ -/** @} */ - -/** - * @name HPTXSTS register bit definitions - * @{ - */ -#define HPTXSTS_PTXQTOP_MASK (0xFFU<<24) /**< Top of the periodic - transmit request queue - mask. */ -#define HPTXSTS_PTXQTOP(n) ((n)<<24) /**< Top of the periodic - transmit request queue - value. */ -#define HPTXSTS_PTXQSAV_MASK (0xFF<<16) /**< Periodic transmit request - queue Space Available - mask. */ -#define HPTXSTS_PTXQSAV(n) ((n)<<16) /**< Periodic transmit request - queue Space Available - value. */ -#define HPTXSTS_PTXFSAVL_MASK (0xFFFF<<0) /**< Periodic transmit Data - FIFO Space Available - mask. */ -#define HPTXSTS_PTXFSAVL(n) ((n)<<0) /**< Periodic transmit Data - FIFO Space Available - value. */ -/** @} */ - -/** - * @name HAINT register bit definitions - * @{ - */ -#define HAINT_HAINT_MASK (0xFFFFU<<0)/**< Channel interrupts mask. */ -#define HAINT_HAINT(n) ((n)<<0) /**< Channel interrupts value. */ -/** @} */ - -/** - * @name HAINTMSK register bit definitions - * @{ - */ -#define HAINTMSK_HAINTM_MASK (0xFFFFU<<0)/**< Channel interrupt mask - mask. */ -#define HAINTMSK_HAINTM(n) ((n)<<0) /**< Channel interrupt mask - value. */ -/** @} */ - -/** - * @name HPRT register bit definitions - * @{ - */ -#define HPRT_PSPD_MASK (3U<<17) /**< Port speed mask. */ -#define HPRT_PSPD_FS (1U<<17) /**< Full speed value. */ -#define HPRT_PSPD_LS (2U<<17) /**< Low speed value. */ -#define HPRT_PTCTL_MASK (15<<13) /**< Port Test control mask. */ -#define HPRT_PTCTL(n) ((n)<<13) /**< Port Test control value. */ -#define HPRT_PPWR (1U<<12) /**< Port power. */ -#define HPRT_PLSTS_MASK (3U<<11) /**< Port Line status mask. */ -#define HPRT_PLSTS_DM (1U<<11) /**< Logic level of D-. */ -#define HPRT_PLSTS_DP (1U<<10) /**< Logic level of D+. */ -#define HPRT_PRST (1U<<8) /**< Port reset. */ -#define HPRT_PSUSP (1U<<7) /**< Port suspend. */ -#define HPRT_PRES (1U<<6) /**< Port Resume. */ -#define HPRT_POCCHNG (1U<<5) /**< Port overcurrent change. */ -#define HPRT_POCA (1U<<4) /**< Port overcurrent active. */ -#define HPRT_PENCHNG (1U<<3) /**< Port enable/disable change.*/ -#define HPRT_PENA (1U<<2) /**< Port enable. */ -#define HPRT_PCDET (1U<<1) /**< Port Connect detected. */ -#define HPRT_PCSTS (1U<<0) /**< Port connect status. */ -/** @} */ - -/** - * @name HCCHAR register bit definitions - * @{ - */ -#define HCCHAR_CHENA (1U<<31) /**< Channel enable. */ -#define HCCHAR_CHDIS (1U<<30) /**< Channel Disable. */ -#define HCCHAR_ODDFRM (1U<<29) /**< Odd frame. */ -#define HCCHAR_DAD_MASK (0x7FU<<22) /**< Device Address mask. */ -#define HCCHAR_DAD(n) ((n)<<22) /**< Device Address value. */ -#define HCCHAR_MCNT_MASK (3U<<20) /**< Multicount mask. */ -#define HCCHAR_MCNT(n) ((n)<<20) /**< Multicount value. */ -#define HCCHAR_EPTYP_MASK (3U<<18) /**< Endpoint type mask. */ -#define HCCHAR_EPTYP(n) ((n)<<18) /**< Endpoint type value. */ -#define HCCHAR_EPTYP_CTL (0U<<18) /**< Control endpoint value. */ -#define HCCHAR_EPTYP_ISO (1U<<18) /**< Isochronous endpoint value.*/ -#define HCCHAR_EPTYP_BULK (2U<<18) /**< Bulk endpoint value. */ -#define HCCHAR_EPTYP_INTR (3U<<18) /**< Interrupt endpoint value. */ -#define HCCHAR_LSDEV (1U<<17) /**< Low-Speed device. */ -#define HCCHAR_EPDIR (1U<<15) /**< Endpoint direction. */ -#define HCCHAR_EPNUM_MASK (15U<<11) /**< Endpoint number mask. */ -#define HCCHAR_EPNUM(n) ((n)<<11) /**< Endpoint number value. */ -#define HCCHAR_MPS_MASK (0x7FFU<<0) /**< Maximum packet size mask. */ -#define HCCHAR_MPS(n) ((n)<<0) /**< Maximum packet size value. */ -/** @} */ - -/** - * @name HCINT register bit definitions - * @{ - */ -#define HCINT_DTERR (1U<<10) /**< Data toggle error. */ -#define HCINT_FRMOR (1U<<9) /**< Frame overrun. */ -#define HCINT_BBERR (1U<<8) /**< Babble error. */ -#define HCINT_TRERR (1U<<7) /**< Transaction Error. */ -#define HCINT_ACK (1U<<5) /**< ACK response - received/transmitted - interrupt. */ -#define HCINT_NAK (1U<<4) /**< NAK response received - interrupt. */ -#define HCINT_STALL (1U<<3) /**< STALL response received - interrupt. */ -#define HCINT_CHH (1U<<1) /**< Channel halted. */ -#define HCINT_XFRC (1U<<0) /**< Transfer completed. */ -/** @} */ - -/** - * @name HCINTMSK register bit definitions - * @{ - */ -#define HCINTMSK_DTERRM (1U<<10) /**< Data toggle error mask. */ -#define HCINTMSK_FRMORM (1U<<9) /**< Frame overrun mask. */ -#define HCINTMSK_BBERRM (1U<<8) /**< Babble error mask. */ -#define HCINTMSK_TRERRM (1U<<7) /**< Transaction error mask. */ -#define HCINTMSK_NYET (1U<<6) /**< NYET response received - interrupt mask. */ -#define HCINTMSK_ACKM (1U<<5) /**< ACK Response - received/transmitted - interrupt mask. */ -#define HCINTMSK_NAKM (1U<<4) /**< NAK response received - interrupt mask. */ -#define HCINTMSK_STALLM (1U<<3) /**< STALL response received - interrupt mask. */ -#define HCINTMSK_AHBERRM (1U<<2) -#define HCINTMSK_CHHM (1U<<1) /**< Channel halted mask. */ -#define HCINTMSK_XFRCM (1U<<0) /**< Transfer completed mask. */ -/** @} */ - -/** - * @name HCTSIZ register bit definitions - * @{ - */ -#define HCTSIZ_DPID_MASK (3U<<29) /**< PID mask. */ -#define HCTSIZ_DPID_DATA0 (0U<<29) /**< DATA0. */ -#define HCTSIZ_DPID_DATA2 (1U<<29) /**< DATA2. */ -#define HCTSIZ_DPID_DATA1 (2U<<29) /**< DATA1. */ -#define HCTSIZ_DPID_MDATA (3U<<29) /**< MDATA. */ -#define HCTSIZ_DPID_SETUP (3U<<29) /**< SETUP. */ -#define HCTSIZ_PKTCNT_MASK (0x3FFU<<19)/**< Packet count mask. */ -#define HCTSIZ_PKTCNT(n) ((n)<<19) /**< Packet count value. */ -#define HCTSIZ_XFRSIZ_MASK (0x7FFFF<<0)/**< Transfer size mask. */ -#define HCTSIZ_XFRSIZ(n) ((n)<<0) /**< Transfer size value. */ -/** @} */ - -/** - * @name DCFG register bit definitions - * @{ - */ -#define DCFG_PFIVL_MASK (3U<<11) /**< Periodic frame interval - mask. */ -#define DCFG_PFIVL(n) ((n)<<11) /**< Periodic frame interval - value. */ -#define DCFG_DAD_MASK (0x7FU<<4) /**< Device address mask. */ -#define DCFG_DAD(n) ((n)<<4) /**< Device address value. */ -#define DCFG_NZLSOHSK (1U<<2) /**< Non-Zero-Length status - OUT handshake. */ -#define DCFG_DSPD_MASK (3U<<0) /**< Device speed mask. */ -#define DCFG_DSPD_HS (0U<<0) /**< High speed (USB 2.0). */ -#define DCFG_DSPD_HS_FS (1U<<0) /**< High speed (USB 2.0) in FS - mode. */ -#define DCFG_DSPD_FS11 (3U<<0) /**< Full speed (USB 1.1 - transceiver clock is 48 - MHz). */ -/** @} */ - -/** - * @name DCTL register bit definitions - * @{ - */ -#define DCTL_POPRGDNE (1U<<11) /**< Power-on programming done. */ -#define DCTL_CGONAK (1U<<10) /**< Clear global OUT NAK. */ -#define DCTL_SGONAK (1U<<9) /**< Set global OUT NAK. */ -#define DCTL_CGINAK (1U<<8) /**< Clear global non-periodic - IN NAK. */ -#define DCTL_SGINAK (1U<<7) /**< Set global non-periodic - IN NAK. */ -#define DCTL_TCTL_MASK (7U<<4) /**< Test control mask. */ -#define DCTL_TCTL(n) ((n)<<4 /**< Test control value. */ -#define DCTL_GONSTS (1U<<3) /**< Global OUT NAK status. */ -#define DCTL_GINSTS (1U<<2) /**< Global non-periodic IN - NAK status. */ -#define DCTL_SDIS (1U<<1) /**< Soft disconnect. */ -#define DCTL_RWUSIG (1U<<0) /**< Remote wakeup signaling. */ -/** @} */ - -/** - * @name DSTS register bit definitions - * @{ - */ -#define DSTS_FNSOF_MASK (0x3FFU<<8) /**< Frame number of the received - SOF mask. */ -#define DSTS_FNSOF(n) ((n)<<8) /**< Frame number of the received - SOF value. */ -#define DSTS_FNSOF_ODD (1U<<8) /**< Frame parity of the received - SOF value. */ -#define DSTS_EERR (1U<<3) /**< Erratic error. */ -#define DSTS_ENUMSPD_MASK (3U<<1) /**< Enumerated speed mask. */ -#define DSTS_ENUMSPD_FS_48 (3U<<1) /**< Full speed (PHY clock is - running at 48 MHz). */ -#define DSTS_ENUMSPD_HS_480 (0U<<1) /**< High speed. */ -#define DSTS_SUSPSTS (1U<<0) /**< Suspend status. */ -/** @} */ - -/** - * @name DIEPMSK register bit definitions - * @{ - */ -#define DIEPMSK_TXFEM (1U<<6) /**< Transmit FIFO empty mask. */ -#define DIEPMSK_INEPNEM (1U<<6) /**< IN endpoint NAK effective - mask. */ -#define DIEPMSK_ITTXFEMSK (1U<<4) /**< IN token received when - TxFIFO empty mask. */ -#define DIEPMSK_TOCM (1U<<3) /**< Timeout condition mask. */ -#define DIEPMSK_EPDM (1U<<1) /**< Endpoint disabled - interrupt mask. */ -#define DIEPMSK_XFRCM (1U<<0) /**< Transfer completed - interrupt mask. */ -/** @} */ - -/** - * @name DOEPMSK register bit definitions - * @{ - */ -#define DOEPMSK_OTEPDM (1U<<4) /**< OUT token received when - endpoint disabled mask. */ -#define DOEPMSK_STUPM (1U<<3) /**< SETUP phase done mask. */ -#define DOEPMSK_EPDM (1U<<1) /**< Endpoint disabled - interrupt mask. */ -#define DOEPMSK_XFRCM (1U<<0) /**< Transfer completed - interrupt mask. */ -/** @} */ - -/** - * @name DAINT register bit definitions - * @{ - */ -#define DAINT_OEPINT_MASK (0xFFFFU<<16)/**< OUT endpoint interrupt - bits mask. */ -#define DAINT_OEPINT(n) ((n)<<16) /**< OUT endpoint interrupt - bits value. */ -#define DAINT_IEPINT_MASK (0xFFFFU<<0)/**< IN endpoint interrupt - bits mask. */ -#define DAINT_IEPINT(n) ((n)<<0) /**< IN endpoint interrupt - bits value. */ -/** @} */ - -/** - * @name DAINTMSK register bit definitions - * @{ - */ -#define DAINTMSK_OEPM_MASK (0xFFFFU<<16)/**< OUT EP interrupt mask - bits mask. */ -#define DAINTMSK_OEPM(n) (1U<<(16+(n)))/**< OUT EP interrupt mask - bits value. */ -#define DAINTMSK_IEPM_MASK (0xFFFFU<<0)/**< IN EP interrupt mask - bits mask. */ -#define DAINTMSK_IEPM(n) (1U<<(n)) /**< IN EP interrupt mask - bits value. */ -/** @} */ - -/** - * @name DVBUSDIS register bit definitions - * @{ - */ -#define DVBUSDIS_VBUSDT_MASK (0xFFFFU<<0)/**< Device VBUS discharge - time mask. */ -#define DVBUSDIS_VBUSDT(n) ((n)<<0) /**< Device VBUS discharge - time value. */ -/** @} */ - -/** - * @name DVBUSPULSE register bit definitions - * @{ - */ -#define DVBUSPULSE_DVBUSP_MASK (0xFFFU<<0) /**< Device VBUSpulsing time - mask. */ -#define DVBUSPULSE_DVBUSP(n) ((n)<<0) /**< Device VBUS pulsing time - value. */ -/** @} */ - -/** - * @name DIEPEMPMSK register bit definitions - * @{ - */ -#define DIEPEMPMSK_INEPTXFEM(n) (1U<<(n)) /**< IN EP Tx FIFO empty - interrupt mask bit. */ -/** @} */ - -/** - * @name DIEPCTL register bit definitions - * @{ - */ -#define DIEPCTL_EPENA (1U<<31) /**< Endpoint enable. */ -#define DIEPCTL_EPDIS (1U<<30) /**< Endpoint disable. */ -#define DIEPCTL_SD1PID (1U<<29) /**< Set DATA1 PID. */ -#define DIEPCTL_SODDFRM (1U<<29) /**< Set odd frame. */ -#define DIEPCTL_SD0PID (1U<<28) /**< Set DATA0 PID. */ -#define DIEPCTL_SEVNFRM (1U<<28) /**< Set even frame. */ -#define DIEPCTL_SNAK (1U<<27) /**< Set NAK. */ -#define DIEPCTL_CNAK (1U<<26) /**< Clear NAK. */ -#define DIEPCTL_TXFNUM_MASK (15U<<22) /**< TxFIFO number mask. */ -#define DIEPCTL_TXFNUM(n) ((n)<<22) /**< TxFIFO number value. */ -#define DIEPCTL_STALL (1U<<21) /**< STALL handshake. */ -#define DIEPCTL_SNPM (1U<<20) /**< Snoop mode. */ -#define DIEPCTL_EPTYP_MASK (3<<18) /**< Endpoint type mask. */ -#define DIEPCTL_EPTYP_CTRL (0U<<18) /**< Control. */ -#define DIEPCTL_EPTYP_ISO (1U<<18) /**< Isochronous. */ -#define DIEPCTL_EPTYP_BULK (2U<<18) /**< Bulk. */ -#define DIEPCTL_EPTYP_INTR (3U<<18) /**< Interrupt. */ -#define DIEPCTL_NAKSTS (1U<<17) /**< NAK status. */ -#define DIEPCTL_EONUM (1U<<16) /**< Even/odd frame. */ -#define DIEPCTL_DPID (1U<<16) /**< Endpoint data PID. */ -#define DIEPCTL_USBAEP (1U<<15) /**< USB active endpoint. */ -#define DIEPCTL_MPSIZ_MASK (0x3FFU<<0) /**< Maximum Packet size mask. */ -#define DIEPCTL_MPSIZ(n) ((n)<<0) /**< Maximum Packet size value. */ -/** @} */ - -/** - * @name DIEPINT register bit definitions - * @{ - */ -#define DIEPINT_TXFE (1U<<7) /**< Transmit FIFO empty. */ -#define DIEPINT_INEPNE (1U<<6) /**< IN endpoint NAK effective. */ -#define DIEPINT_ITTXFE (1U<<4) /**< IN Token received when - TxFIFO is empty. */ -#define DIEPINT_TOC (1U<<3) /**< Timeout condition. */ -#define DIEPINT_EPDISD (1U<<1) /**< Endpoint disabled - interrupt. */ -#define DIEPINT_XFRC (1U<<0) /**< Transfer completed. */ -/** @} */ - -/** - * @name DIEPTSIZ register bit definitions - * @{ - */ -#define DIEPTSIZ_MCNT_MASK (3U<<29) /**< Multi count mask. */ -#define DIEPTSIZ_MCNT(n) ((n)<<29) /**< Multi count value. */ -#define DIEPTSIZ_PKTCNT_MASK (0x3FF<<19) /**< Packet count mask. */ -#define DIEPTSIZ_PKTCNT(n) ((n)<<19) /**< Packet count value. */ -#define DIEPTSIZ_XFRSIZ_MASK (0x7FFFFU<<0)/**< Transfer size mask. */ -#define DIEPTSIZ_XFRSIZ(n) ((n)<<0) /**< Transfer size value. */ -/** @} */ - -/** - * @name DTXFSTS register bit definitions. - * @{ - */ -#define DTXFSTS_INEPTFSAV_MASK (0xFFFF<<0) /**< IN endpoint TxFIFO space - available. */ -/** @} */ - -/** - * @name DOEPCTL register bit definitions. - * @{ - */ -#define DOEPCTL_EPENA (1U<<31) /**< Endpoint enable. */ -#define DOEPCTL_EPDIS (1U<<30) /**< Endpoint disable. */ -#define DOEPCTL_SD1PID (1U<<29) /**< Set DATA1 PID. */ -#define DOEPCTL_SODDFRM (1U<<29) /**< Set odd frame. */ -#define DOEPCTL_SD0PID (1U<<28) /**< Set DATA0 PID. */ -#define DOEPCTL_SEVNFRM (1U<<28) /**< Set even frame. */ -#define DOEPCTL_SNAK (1U<<27) /**< Set NAK. */ -#define DOEPCTL_CNAK (1U<<26) /**< Clear NAK. */ -#define DOEPCTL_STALL (1U<<21) /**< STALL handshake. */ -#define DOEPCTL_SNPM (1U<<20) /**< Snoop mode. */ -#define DOEPCTL_EPTYP_MASK (3U<<18) /**< Endpoint type mask. */ -#define DOEPCTL_EPTYP_CTRL (0U<<18) /**< Control. */ -#define DOEPCTL_EPTYP_ISO (1U<<18) /**< Isochronous. */ -#define DOEPCTL_EPTYP_BULK (2U<<18) /**< Bulk. */ -#define DOEPCTL_EPTYP_INTR (3U<<18) /**< Interrupt. */ -#define DOEPCTL_NAKSTS (1U<<17) /**< NAK status. */ -#define DOEPCTL_EONUM (1U<<16) /**< Even/odd frame. */ -#define DOEPCTL_DPID (1U<<16) /**< Endpoint data PID. */ -#define DOEPCTL_USBAEP (1U<<15) /**< USB active endpoint. */ -#define DOEPCTL_MPSIZ_MASK (0x3FFU<<0) /**< Maximum Packet size mask. */ -#define DOEPCTL_MPSIZ(n) ((n)<<0) /**< Maximum Packet size value. */ -/** @} */ - -/** - * @name DOEPINT register bit definitions - * @{ - */ -#define DOEPINT_B2BSTUP (1U<<6) /**< Back-to-back SETUP packets - received. */ -#define DOEPINT_OTEPDIS (1U<<4) /**< OUT token received when - endpoint disabled. */ -#define DOEPINT_STUP (1U<<3) /**< SETUP phase done. */ -#define DOEPINT_EPDISD (1U<<1) /**< Endpoint disabled - interrupt. */ -#define DOEPINT_XFRC (1U<<0) /**< Transfer completed - interrupt. */ -/** @} */ - -/** - * @name DOEPTSIZ register bit definitions - * @{ - */ -#define DOEPTSIZ_RXDPID_MASK (3U<<29) /**< Received data PID mask. */ -#define DOEPTSIZ_RXDPID(n) ((n)<<29) /**< Received data PID value. */ -#define DOEPTSIZ_STUPCNT_MASK (3U<<29) /**< SETUP packet count mask. */ -#define DOEPTSIZ_STUPCNT(n) ((n)<<29) /**< SETUP packet count value. */ -#define DOEPTSIZ_PKTCNT_MASK (0x3FFU<<19)/**< Packet count mask. */ -#define DOEPTSIZ_PKTCNT(n) ((n)<<19) /**< Packet count value. */ -#define DOEPTSIZ_XFRSIZ_MASK (0x7FFFFU<<0)/**< Transfer size mask. */ -#define DOEPTSIZ_XFRSIZ(n) ((n)<<0) /**< Transfer size value. */ -/** @} */ - -/** - * @name PCGCCTL register bit definitions - * @{ - */ -#define PCGCCTL_PHYSUSP (1U<<4) /**< PHY Suspended. */ -#define PCGCCTL_GATEHCLK (1U<<1) /**< Gate HCLK. */ -#define PCGCCTL_STPPCLK (1U<<0) /**< Stop PCLK. */ -/** @} */ - -/** - * @brief OTG_FS registers block memory address. - */ -#define OTG_FS_ADDR 0x50000000 - -/** - * @brief OTG_HS registers block memory address. - */ -#define OTG_HS_ADDR 0x40040000 - -/** - * @brief Accesses to the OTG_FS registers block. - */ -#define OTG_FS ((stm32_otg_t *)OTG_FS_ADDR) - -/** - * @brief Accesses to the OTG_HS registers block. - */ -#define OTG_HS ((stm32_otg_t *)OTG_HS_ADDR) - -#endif /* _STM32_OTG_H_ */ - -/** @} */ diff --git a/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.c b/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.c index 3abab1c..2894907 100644 --- a/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.c +++ b/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.c @@ -1,6 +1,6 @@ /* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) + ChibiOS - Copyright (C) 2006..2017 Giovanni Di Sirio + Copyright (C) 2015..2017 Diego Ismirlian, (dismirlian (at) google's mail) Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -21,6 +21,53 @@ #include "usbh/internal.h" #include <string.h> +#if STM32_USBH_USE_OTG1 +#if !defined(STM32_OTG1_CHANNELS_NUMBER) +#error "STM32_OTG1_CHANNELS_NUMBER must be defined" +#endif +#if !defined(STM32_OTG1_RXFIFO_SIZE) +#define STM32_OTG1_RXFIFO_SIZE 1024 +#endif +#if !defined(STM32_OTG1_PTXFIFO_SIZE) +#define STM32_OTG1_PTXFIFO_SIZE 128 +#endif +#if !defined(STM32_OTG1_NPTXFIFO_SIZE) +#define STM32_OTG1_NPTXFIFO_SIZE 128 +#endif +#if (STM32_OTG1_RXFIFO_SIZE + STM32_OTG1_PTXFIFO_SIZE + STM32_OTG1_NPTXFIFO_SIZE) > (STM32_OTG1_FIFO_MEM_SIZE * 4) +#error "Not enough memory in OTG1 implementation" +#elif (STM32_OTG1_RXFIFO_SIZE + STM32_OTG1_PTXFIFO_SIZE + STM32_OTG1_NPTXFIFO_SIZE) < (STM32_OTG1_FIFO_MEM_SIZE * 4) +#warning "Spare memory in OTG1; could enlarge RX, PTX or NPTX FIFO sizes" +#endif +#if (STM32_OTG1_RXFIFO_SIZE % 4) || (STM32_OTG1_PTXFIFO_SIZE % 4) || (STM32_OTG1_NPTXFIFO_SIZE % 4) +#error "FIFO sizes must be a multiple of 32-bit words" +#endif +#endif + +#if STM32_USBH_USE_OTG2 +#if !defined(STM32_OTG2_CHANNELS_NUMBER) +#error "STM32_OTG2_CHANNELS_NUMBER must be defined" +#endif +#if !defined(STM32_OTG2_RXFIFO_SIZE) +#define STM32_OTG2_RXFIFO_SIZE 2048 +#endif +#if !defined(STM32_OTG2_PTXFIFO_SIZE) +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#endif +#if !defined(STM32_OTG2_NPTXFIFO_SIZE) +#define STM32_OTG2_NPTXFIFO_SIZE 1024 +#endif +#if (STM32_OTG2_RXFIFO_SIZE + STM32_OTG2_PTXFIFO_SIZE + STM32_OTG2_NPTXFIFO_SIZE) > (STM32_OTG2_FIFO_MEM_SIZE * 4) +#error "Not enough memory in OTG2 implementation" +#elif (STM32_OTG2_RXFIFO_SIZE + STM32_OTG2_PTXFIFO_SIZE + STM32_OTG2_NPTXFIFO_SIZE) < (STM32_OTG2_FIFO_MEM_SIZE * 4) +#warning "Spare memory in OTG2; could enlarge RX, PTX or NPTX FIFO sizes" +#endif +#if (STM32_OTG2_RXFIFO_SIZE % 4) || (STM32_OTG2_PTXFIFO_SIZE % 4) || (STM32_OTG2_NPTXFIFO_SIZE % 4) +#error "FIFO sizes must be a multiple of 32-bit words" +#endif +#endif + + #if USBH_LLD_DEBUG_ENABLE_TRACE #define udbgf(f, ...) usbDbgPrintf(f, ##__VA_ARGS__) #define udbg(f, ...) usbDbgPuts(f, ##__VA_ARGS__) @@ -58,8 +105,15 @@ static void _try_commit_np(USBHDriver *host); static void otg_rxfifo_flush(USBHDriver *usbp); static void otg_txfifo_flush(USBHDriver *usbp, uint32_t fifo); +#if STM32_USBH_USE_OTG1 +USBHDriver USBHD1; +#endif +#if STM32_USBH_USE_OTG2 +USBHDriver USBHD2; +#endif + /*===========================================================================*/ -/* Little helper functions. */ +/* Little helper functions. */ /*===========================================================================*/ static inline void _move_to_pending_queue(usbh_ep_t *ep) { list_move_tail(&ep->node, ep->pending_list); @@ -73,18 +127,8 @@ static inline void _save_dt_mask(usbh_ep_t *ep, uint32_t hctsiz) { ep->dt_mask = hctsiz & HCTSIZ_DPID_MASK; } -#if 1 -#define _transfer_completed _transfer_completedI -#else -static inline void _transfer_completed(usbh_ep_t *ep, usbh_urb_t *urb, usbh_urbstatus_t status) { - osalSysLockFromISR(); - _transfer_completedI(ep, urb, status); - osalSysUnlockFromISR(); -} -#endif - /*===========================================================================*/ -/* Functions called from many places. */ +/* Functions called from many places. */ /*===========================================================================*/ static void _transfer_completedI(usbh_ep_t *ep, usbh_urb_t *urb, usbh_urbstatus_t status) { osalDbgCheckClassI(); @@ -200,7 +244,6 @@ static bool _activate_ep(USBHDriver *host, usbh_ep_t *ep) { ep->xfer.buf = urb->buff; } ep->xfer.error_count = 0; - //urb->status = USBH_URBSTATUS_QUEUED; } else { osalDbgCheck(urb->requestedLength >= urb->actualLength); @@ -340,7 +383,7 @@ static bool _update_urb(usbh_ep_t *ep, uint32_t hctsiz, usbh_urb_t *urb, bool co osalDbgCheck(len == ep->xfer.partial); //TODO: if len == ep->xfer.partial, use this instead of the above code } -#if 1 +#if 0 osalDbgAssert(urb->actualLength + len <= urb->requestedLength, "what happened?"); #else if (urb->actualLength + len > urb->requestedLength) { @@ -412,7 +455,7 @@ static void _purge_queue(USBHDriver *host, struct list_head *list) { _release_channel(host, hcm); _update_urb(ep, hcm->hc->HCTSIZ, urb, FALSE); } - _transfer_completed(ep, urb, USBH_URBSTATUS_DISCONNECTED); + _transfer_completedI(ep, urb, USBH_URBSTATUS_DISCONNECTED); } } @@ -487,12 +530,12 @@ static uint32_t _write_packet(struct list_head *list, uint32_t space_available) /*===========================================================================*/ -/* API. */ +/* API. */ /*===========================================================================*/ void usbh_lld_ep_object_init(usbh_ep_t *ep) { /* CTRL(IN) CTRL(OUT) INT(IN) INT(OUT) BULK(IN) BULK(OUT) ISO(IN) ISO(OUT) - * STALL si sólo DAT/STAT si si si si no no ep->type != ISO && (ep->type != CTRL || ctrlphase != SETUP) + * STALL si solo DAT/STAT si si si si no no ep->type != ISO && (ep->type != CTRL || ctrlphase != SETUP) * ACK si si si si si si no no ep->type != ISO * NAK si si si si si si no no ep->type != ISO * BBERR si no si no si no si no ep->in @@ -548,7 +591,6 @@ void usbh_lld_ep_object_init(usbh_ep_t *ep) { void usbh_lld_ep_open(usbh_ep_t *ep) { uinfof("\t%s: Open EP", ep->name); ep->status = USBH_EPSTATUS_OPEN; - osalOsRescheduleS(); } void usbh_lld_ep_close(usbh_ep_t *ep) { @@ -560,11 +602,22 @@ void usbh_lld_ep_close(usbh_ep_t *ep) { } uinfof("\t%s: Closed", ep->name); ep->status = USBH_EPSTATUS_CLOSED; - osalOsRescheduleS(); +} + +bool usbh_lld_ep_reset(usbh_ep_t *ep) { + ep->dt_mask = HCTSIZ_DPID_DATA0; + return TRUE; } void usbh_lld_urb_submit(usbh_urb_t *urb) { usbh_ep_t *const ep = urb->ep; + USBHDriver *const host = ep->device->host; + + if (!(host->otg->HPRT & HPRT_PENA)) { + uwarnf("\t%s: Can't submit URB, port disabled", ep->name); + _usbh_urb_completeI(urb, USBH_URBSTATUS_DISCONNECTED); + return; + } /* add the URB to the EP's queue */ list_add_tail(&urb->node, &ep->urb_list); @@ -576,7 +629,7 @@ void usbh_lld_urb_submit(usbh_urb_t *urb) { _move_to_pending_queue(ep); if (usbhEPIsPeriodic(ep)) { - ep->device->host->otg->GINTMSK |= GINTMSK_SOFM; + host->otg->GINTMSK |= GINTMSK_SOFM; } else { /* try to queue non-periodic transfers */ _try_commit_np(ep->device->host); @@ -584,6 +637,7 @@ void usbh_lld_urb_submit(usbh_urb_t *urb) { } } +/* usbh_lld_urb_abort may require a reschedule if called from a S-locked state */ bool usbh_lld_urb_abort(usbh_urb_t *urb, usbh_urbstatus_t status) { osalDbgCheck(usbhURBIsBusy(urb)); @@ -596,17 +650,20 @@ bool usbh_lld_urb_abort(usbh_urb_t *urb, usbh_urbstatus_t status) { if (hcm->halt_reason == USBH_LLD_HALTREASON_NONE) { /* The channel is not being halted */ + uinfof("\t%s: usbh_lld_urb_abort: channel is not being halted", hcm->ep->name); urb->status = status; _halt_channel(ep->device->host, hcm, USBH_LLD_HALTREASON_ABORT); } else { /* The channel is being halted, so we can't re-halt it. The CHH interrupt will * be in charge of completing the transfer, but the URB will not have the specified status. */ + uinfof("\t%s: usbh_lld_urb_abort: channel is being halted", hcm->ep->name); } return FALSE; } - /* This URB is active, we can cancel it now */ + /* This URB is inactive, we can cancel it now */ + uinfof("\t%s: usbh_lld_urb_abort: URB is not active", ep->name); _transfer_completedI(ep, urb, status); return TRUE; @@ -614,7 +671,7 @@ bool usbh_lld_urb_abort(usbh_urb_t *urb, usbh_urbstatus_t status) { /*===========================================================================*/ -/* Channel Interrupts. */ +/* Channel Interrupts. */ /*===========================================================================*/ //CTRL(IN) CTRL(OUT) INT(IN) INT(OUT) BULK(IN) BULK(OUT) ISO(IN) ISO(OUT) @@ -705,7 +762,7 @@ static void _complete_bulk_int(USBHDriver *host, stm32_hc_management_t *hcm, usb _save_dt_mask(ep, hctsiz); if (_update_urb(ep, hctsiz, urb, TRUE)) { udbgf("\t%s: done", ep->name); - _transfer_completed(ep, urb, USBH_URBSTATUS_OK); + _transfer_completedI(ep, urb, USBH_URBSTATUS_OK); } else { osalDbgCheck(urb->requestedLength > 0x7FFFF); uwarnf("\t%s: incomplete", ep->name); @@ -736,7 +793,7 @@ static void _complete_control(USBHDriver *host, stm32_hc_management_t *hcm, usbh } else { osalDbgCheck(ep->xfer.u.ctrl_phase == USBH_LLD_CTRLPHASE_STATUS); udbgf("\t%s: STATUS done", ep->name); - _transfer_completed(ep, urb, USBH_URBSTATUS_OK); + _transfer_completedI(ep, urb, USBH_URBSTATUS_OK); } _try_commit_np(host); } @@ -762,7 +819,7 @@ static void _complete_iso(USBHDriver *host, stm32_hc_management_t *hcm, usbh_ep_ udbgf("\t%s: done", hcm->ep->name); _release_channel(host, hcm); _update_urb(ep, hctsiz, urb, TRUE); - _transfer_completed(ep, urb, USBH_URBSTATUS_OK); + _transfer_completedI(ep, urb, USBH_URBSTATUS_OK); _try_commit_p(host, FALSE); } @@ -847,7 +904,7 @@ static inline void _chh_int(USBHDriver *host, stm32_hc_management_t *hcm, stm32_ switch (reason) { case USBH_LLD_HALTREASON_NAK: if ((ep->type == USBH_EPTYPE_INT) && ep->in) { - _transfer_completed(ep, urb, USBH_URBSTATUS_TIMEOUT); + _transfer_completedI(ep, urb, USBH_URBSTATUS_TIMEOUT); } else { ep->xfer.error_count = 0; _move_to_pending_queue(ep); @@ -855,15 +912,19 @@ static inline void _chh_int(USBHDriver *host, stm32_hc_management_t *hcm, stm32_ break; case USBH_LLD_HALTREASON_STALL: - if ((ep->type == USBH_EPTYPE_CTRL) && (ep->xfer.u.ctrl_phase == USBH_LLD_CTRLPHASE_SETUP)) { - uerrf("\t%s: Faulty device: STALLed SETUP phase", ep->name); + if (ep->type == USBH_EPTYPE_CTRL) { + if (ep->xfer.u.ctrl_phase == USBH_LLD_CTRLPHASE_SETUP) { + uerrf("\t%s: Faulty device: STALLed SETUP phase", ep->name); + } + } else { + ep->status = USBH_EPSTATUS_HALTED; } - _transfer_completed(ep, urb, USBH_URBSTATUS_STALL); + _transfer_completedI(ep, urb, USBH_URBSTATUS_STALL); break; case USBH_LLD_HALTREASON_ERROR: if ((ep->type == USBH_EPTYPE_ISO) || done || (ep->xfer.error_count >= 3)) { - _transfer_completed(ep, urb, USBH_URBSTATUS_ERROR); + _transfer_completedI(ep, urb, USBH_URBSTATUS_ERROR); } else { uerrf("\t%s: err=%d, done=%d, retry", ep->name, ep->xfer.error_count, done); _move_to_pending_queue(ep); @@ -872,7 +933,7 @@ static inline void _chh_int(USBHDriver *host, stm32_hc_management_t *hcm, stm32_ case USBH_LLD_HALTREASON_ABORT: uwarnf("\t%s: Abort", ep->name); - _transfer_completed(ep, urb, urb->status); + _transfer_completedI(ep, urb, urb->status); break; default: @@ -926,10 +987,15 @@ static inline void _hcint_int(USBHDriver *host) { haint = host->otg->HAINT; haint &= host->otg->HAINTMSK; +#if USBH_LLD_DEBUG_ENABLE_ERRORS if (!haint) { - uerrf("HAINT=%08x, HAINTMSK=%08x", host->otg->HAINT, host->otg->HAINTMSK); + uint32_t a, b; + a = host->otg->HAINT; + b = host->otg->HAINTMSK; + uerrf("HAINT=%08x, HAINTMSK=%08x", a, b); return; } +#endif #if 1 //channel lookup loop uint8_t i; @@ -951,9 +1017,50 @@ static inline void _hcint_int(USBHDriver *host) { /*===========================================================================*/ -/* Host interrupts. */ +/* Host interrupts. */ /*===========================================================================*/ static inline void _sof_int(USBHDriver *host) { + + /* this is part of the workaround to the LS bug in the OTG core */ +#undef HPRT_PLSTS_MASK +#define HPRT_PLSTS_MASK (3U<<10) + if (host->check_ls_activity) { + stm32_otg_t *const otg = host->otg; + uint16_t remaining = otg->HFNUM >> 16; + if (remaining < 5975) { + uwarnf("LS: ISR called too late (time=%d)", 6000 - remaining); + return; + } + /* 15us loop during which we check if the core generates an actual keep-alive + * (or activity other than idle) on the DP/DM lines. After 15us, we abort + * the loop and wait for the next SOF. If no activity is detected, the upper + * layer will time-out waiting for the reset to happen, and the port will remain + * enabled (though in a dumb state). This will be detected on the next port reset + * request and the OTG core will be reset. */ + for (;;) { + uint32_t line_status = otg->HPRT & HPRT_PLSTS_MASK; + remaining = otg->HFNUM >> 16; + if (!(otg->HPRT & HPRT_PENA)) { + uwarn("LS: Port disabled"); + return; + } + if (line_status != HPRT_PLSTS_DM) { + /* success; report that the port is enabled */ + uinfof("LS: activity detected, line=%d, time=%d", line_status >> 10, 6000 - remaining); + host->check_ls_activity = FALSE; + otg->GINTMSK = (otg->GINTMSK & ~GINTMSK_SOFM) | (GINTMSK_HCM | GINTMSK_RXFLVLM); + host->rootport.lld_status |= USBH_PORTSTATUS_ENABLE; + host->rootport.lld_c_status |= USBH_PORTSTATUS_C_ENABLE; + return; + } + if (remaining < 5910) { + udbg("LS: No activity detected"); + return; + } + } + } + + /* real SOF interrupt */ udbg("SOF"); _try_commit_p(host, TRUE); } @@ -1059,9 +1166,6 @@ static inline void _nptxfe_int(USBHDriver *host) { rem += _write_packet(&host->ep_active_lists[USBH_EPTYPE_BULK], otg->HNPTXSTS & HPTXSTS_PTXFSAVL_MASK); -// if (rem) -// otg->GINTMSK |= GINTMSK_NPTXFEM; - if (!rem) otg->GINTMSK &= ~GINTMSK_NPTXFEM; @@ -1073,17 +1177,19 @@ static inline void _ptxfe_int(USBHDriver *host) { uinfo("PTXFE"); } -static inline void _discint_int(USBHDriver *host) { - uint32_t hprt = host->otg->HPRT; - - uwarn("\tDISCINT"); +static void _disable(USBHDriver *host) { + host->rootport.lld_status &= ~(USBH_PORTSTATUS_CONNECTION | USBH_PORTSTATUS_ENABLE); + host->rootport.lld_c_status |= USBH_PORTSTATUS_C_CONNECTION | USBH_PORTSTATUS_C_ENABLE; - if (!(hprt & HPRT_PCSTS)) { - host->rootport.lld_status &= ~(USBH_PORTSTATUS_CONNECTION | USBH_PORTSTATUS_ENABLE); - host->rootport.lld_c_status |= USBH_PORTSTATUS_C_CONNECTION | USBH_PORTSTATUS_C_ENABLE; - } _purge_active(host); _purge_pending(host); + + host->otg->GINTMSK &= ~(GINTMSK_HCM | GINTMSK_RXFLVLM); +} + +static inline void _discint_int(USBHDriver *host) { + uinfo("DISCINT: Port disconnection detected"); + _disable(host); } static inline void _hprtint_int(USBHDriver *host) { @@ -1099,8 +1205,6 @@ static inline void _hprtint_int(USBHDriver *host) { uinfo("\tHPRT: Port connection detected"); host->rootport.lld_status |= USBH_PORTSTATUS_CONNECTION; host->rootport.lld_c_status |= USBH_PORTSTATUS_C_CONNECTION; - } else { - uinfo("\tHPRT: Port disconnection detected"); } } @@ -1108,9 +1212,32 @@ static inline void _hprtint_int(USBHDriver *host) { hprt_clr |= HPRT_PENCHNG; if (hprt & HPRT_PENA) { uinfo("\tHPRT: Port enabled"); - host->rootport.lld_status |= USBH_PORTSTATUS_ENABLE; host->rootport.lld_status &= ~(USBH_PORTSTATUS_HIGH_SPEED | USBH_PORTSTATUS_LOW_SPEED); + /* configure FIFOs */ +#define HNPTXFSIZ DIEPTXF0 +#if STM32_USBH_USE_OTG1 +#if STM32_USBH_USE_OTG2 + if (&USBHD1 == host) +#endif + { + otg->GRXFSIZ = GRXFSIZ_RXFD(STM32_OTG1_RXFIFO_SIZE / 4); + otg->HNPTXFSIZ = HPTXFSIZ_PTXSA(STM32_OTG1_RXFIFO_SIZE / 4) | HPTXFSIZ_PTXFD(STM32_OTG1_NPTXFIFO_SIZE / 4); + otg->HPTXFSIZ = HPTXFSIZ_PTXSA((STM32_OTG1_RXFIFO_SIZE / 4) + (STM32_OTG1_NPTXFIFO_SIZE / 4)) | HPTXFSIZ_PTXFD(STM32_OTG1_PTXFIFO_SIZE / 4); + } +#endif +#if STM32_USBH_USE_OTG2 +#if STM32_USBH_USE_OTG1 + if (&USBHD2 == host) +#endif + { + otg->GRXFSIZ = GRXFSIZ_RXFD(STM32_OTG2_RXFIFO_SIZE / 4); + otg->HNPTXFSIZ = HPTXFSIZ_PTXSA(STM32_OTG2_RXFIFO_SIZE / 4) | HPTXFSIZ_PTXFD(STM32_OTG2_NPTXFIFO_SIZE / 4); + otg->HPTXFSIZ = HPTXFSIZ_PTXSA((STM32_OTG2_RXFIFO_SIZE / 4) + (STM32_OTG2_NPTXFIFO_SIZE / 4)) | HPTXFSIZ_PTXFD(STM32_OTG2_PTXFIFO_SIZE / 4); + } +#endif +#undef HNPTXFSIZ + /* Make sure the FIFOs are flushed. */ otg_txfifo_flush(host, 0x10); otg_rxfifo_flush(host); @@ -1127,9 +1254,23 @@ static inline void _hprtint_int(USBHDriver *host) { host->rootport.lld_status |= USBH_PORTSTATUS_LOW_SPEED; otg->HFIR = 6000; otg->HCFG = (otg->HCFG & ~HCFG_FSLSPCS_MASK) | HCFG_FSLSPCS_6; + + /* Low speed devices connected to the STM32's internal transceiver sometimes + * don't behave correctly. Although HPRT reports a port enable, really + * no traffic is generated, and the core is non-functional. To avoid + * this we won't report the port enable until we are sure that the + * port is working. */ + host->check_ls_activity = TRUE; + otg->GINTMSK |= GINTMSK_SOFM; } else { otg->HFIR = 48000; otg->HCFG = (otg->HCFG & ~HCFG_FSLSPCS_MASK) | HCFG_FSLSPCS_48; + host->check_ls_activity = FALSE; + + /* enable channel and rx interrupts */ + otg->GINTMSK |= GINTMSK_HCM | GINTMSK_RXFLVLM; + host->rootport.lld_status |= USBH_PORTSTATUS_ENABLE; + host->rootport.lld_c_status |= USBH_PORTSTATUS_C_ENABLE; } } else { if (hprt & HPRT_PCSTS) { @@ -1141,13 +1282,8 @@ static inline void _hprtint_int(USBHDriver *host) { } else { uerr("\tHPRT: Port disabled due to disconnect"); } - - _purge_active(host); - _purge_pending(host); - - host->rootport.lld_status &= ~USBH_PORTSTATUS_ENABLE; + _disable(host); } - host->rootport.lld_c_status |= USBH_PORTSTATUS_C_ENABLE; } if (hprt & HPRT_POCCHNG) { @@ -1179,18 +1315,19 @@ static void usb_lld_serve_interrupt(USBHDriver *host) { } /* check mismatch */ - if (gintsts & GINTSTS_MMIS) { - uerr("Mode Mismatch"); - otg->GINTSTS = gintsts; - return; - } + osalDbgAssert((gintsts & GINTSTS_MMIS) == 0, "mode mismatch"); gintsts &= otg->GINTMSK; if (!gintsts) { - uwarnf("GINTSTS=%08x, GINTMSK=%08x", otg->GINTSTS, otg->GINTMSK); +#if USBH_DEBUG_ENABLE_WARNINGS + uint32_t a, b; + a = otg->GINTSTS; + b = otg->GINTMSK; + uwarnf("Masked bits caused an ISR: GINTSTS=%08x, GINTMSK=%08x (unhandled bits=%08x)", a, b, a & ~b); +#endif return; } -// otg->GINTMSK &= ~(GINTMSK_NPTXFEM | GINTMSK_PTXFEM); + otg->GINTSTS = gintsts; if (gintsts & GINTSTS_SOF) @@ -1214,7 +1351,7 @@ static void usb_lld_serve_interrupt(USBHDriver *host) { /*===========================================================================*/ -/* Interrupt handlers. */ +/* Interrupt handlers. */ /*===========================================================================*/ #if STM32_USBH_USE_OTG1 @@ -1239,7 +1376,7 @@ OSAL_IRQ_HANDLER(STM32_OTG2_HANDLER) { /*===========================================================================*/ -/* Initialization functions. */ +/* Initialization functions. */ /*===========================================================================*/ static void otg_core_reset(USBHDriver *usbp) { stm32_otg_t *const otgp = usbp->otg; @@ -1289,25 +1426,23 @@ static void _init(USBHDriver *host) { #if STM32_USBH_USE_OTG1 #if STM32_USBH_USE_OTG2 - if (&USBHD1 == host) { + if (&USBHD1 == host) #endif + { host->otg = OTG_FS; host->channels_number = STM32_OTG1_CHANNELS_NUMBER; -#if STM32_USBH_USE_OTG2 } #endif -#endif #if STM32_USBH_USE_OTG2 #if STM32_USBH_USE_OTG1 - if (&USBHD2 == host) { + if (&USBHD2 == host) #endif + { host->otg = OTG_HS; host->channels_number = STM32_OTG2_CHANNELS_NUMBER; -#if STM32_USBH_USE_OTG1 } #endif -#endif INIT_LIST_HEAD(&host->ch_free[0]); INIT_LIST_HEAD(&host->ch_free[1]); for (i = 0; i < host->channels_number; i++) { @@ -1341,8 +1476,9 @@ static void _usbh_start(USBHDriver *usbh) { /* Clock activation.*/ #if STM32_USBH_USE_OTG1 #if STM32_USBH_USE_OTG2 - if (&USBHD1 == usbh) { + if (&USBHD1 == usbh) #endif + { /* OTG FS clock enable and reset.*/ rccEnableOTG_FS(FALSE); rccResetOTG_FS(); @@ -1351,27 +1487,25 @@ static void _usbh_start(USBHDriver *usbh) { /* Enables IRQ vector.*/ nvicEnableVector(STM32_OTG1_NUMBER, STM32_USB_OTG1_IRQ_PRIORITY); -#if STM32_USBH_USE_OTG2 } #endif -#endif #if STM32_USBH_USE_OTG2 #if STM32_USBH_USE_OTG1 - if (&USBHD2 == usbh) { + if (&USBHD2 == usbh) #endif + { /* OTG HS clock enable and reset.*/ - rccEnableOTG_HS(FALSE); + rccEnableOTG_HS(TRUE); // Enable HS clock when cpu is in sleep mode + rccDisableOTG_HSULPI(TRUE); // Disable HS ULPI clock when cpu is in sleep mode rccResetOTG_HS(); otgp->GINTMSK = 0; /* Enables IRQ vector.*/ nvicEnableVector(STM32_OTG2_NUMBER, STM32_USB_OTG2_IRQ_PRIORITY); -#if STM32_USBH_USE_OTG1 } #endif -#endif otgp->GUSBCFG = GUSBCFG_PHYSEL | GUSBCFG_TRDT(5); @@ -1386,12 +1520,20 @@ static void _usbh_start(USBHDriver *usbh) { otgp->PCGCCTL = 0; /* Internal FS PHY activation.*/ +#if STM32_OTG_STEPPING == 1 #if defined(BOARD_OTG_NOVBUSSENS) otgp->GCCFG = GCCFG_NOVBUSSENS | GCCFG_PWRDWN; #else otgp->GCCFG = GCCFG_PWRDWN; #endif +#elif STM32_OTG_STEPPING == 2 +#if defined(BOARD_OTG_NOVBUSSENS) + otgp->GCCFG = GCCFG_PWRDWN; +#else + otgp->GCCFG = (GCCFG_VBDEN | GCCFG_PWRDWN); +#endif +#endif /* 48MHz 1.1 PHY.*/ otgp->HCFG = HCFG_FSLSS | HCFG_FSLSPCS_48; @@ -1402,40 +1544,11 @@ static void _usbh_start(USBHDriver *usbh) { otgp->HPRT |= HPRT_PPWR; - /* without this delay, the FIFO sizes are set INcorrectly */ - osalThreadSleepS(MS2ST(200)); - -#define HNPTXFSIZ DIEPTXF0 -#if STM32_USBH_USE_OTG1 -#if STM32_USBH_USE_OTG2 - if (&USBHD1 == usbh) { -#endif - otgp->GRXFSIZ = GRXFSIZ_RXFD(STM32_OTG1_RXFIFO_SIZE / 4); - otgp->HNPTXFSIZ = HPTXFSIZ_PTXSA((STM32_OTG1_RXFIFO_SIZE / 4)) | HPTXFSIZ_PTXFD(STM32_OTG1_NPTXFIFO_SIZE / 4); - otgp->HPTXFSIZ = HPTXFSIZ_PTXSA((STM32_OTG1_RXFIFO_SIZE / 4) + (STM32_OTG1_NPTXFIFO_SIZE / 4)) | HPTXFSIZ_PTXFD(STM32_OTG1_PTXFIFO_SIZE / 4); -#if STM32_USBH_USE_OTG2 - } -#endif -#endif -#if STM32_USBH_USE_OTG2 -#if STM32_USBH_USE_OTG1 - if (&USBHD2 == usbh) { -#endif - otgp->GRXFSIZ = GRXFSIZ_RXFD(STM32_OTG2_RXFIFO_SIZE / 4); - otgp->HNPTXFSIZ = HPTXFSIZ_PTXSA((STM32_OTG2_RXFIFO_SIZE / 4)) | HPTXFSIZ_PTXFD(STM32_OTG2_NPTXFIFO_SIZE / 4); - otgp->HPTXFSIZ = HPTXFSIZ_PTXSA((STM32_OTG2_RXFIFO_SIZE / 4) + (STM32_OTG2_NPTXFIFO_SIZE / 4)) | HPTXFSIZ_PTXFD(STM32_OTG2_PTXFIFO_SIZE / 4); -#if STM32_USBH_USE_OTG1 - } -#endif -#endif - otg_txfifo_flush(usbh, 0x10); otg_rxfifo_flush(usbh); otgp->GINTSTS = 0xffffffff; - otgp->GINTMSK = GINTMSK_DISCM /*| GINTMSK_PTXFEM*/ | GINTMSK_HCM | GINTMSK_HPRTM - /*| GINTMSK_IPXFRM | GINTMSK_NPTXFEM*/ | GINTMSK_RXFLVLM - /*| GINTMSK_SOFM */ | GINTMSK_MMISM; + otgp->GINTMSK = GINTMSK_DISCM | GINTMSK_HPRTM | GINTMSK_MMISM; usbh->rootport.lld_status = USBH_PORTSTATUS_POWER; usbh->rootport.lld_c_status = 0; @@ -1450,7 +1563,7 @@ void usbh_lld_start(USBHDriver *usbh) { } /*===========================================================================*/ -/* Root Hub request handler. */ +/* Root Hub request handler. */ /*===========================================================================*/ usbh_urbstatus_t usbh_lld_root_hub_request(USBHDriver *usbh, uint8_t bmRequestType, uint8_t bRequest, uint16_t wvalue, uint16_t windex, uint16_t wlength, uint8_t *buf) { @@ -1469,18 +1582,18 @@ usbh_urbstatus_t usbh_lld_root_hub_request(USBHDriver *usbh, uint8_t bmRequestTy break; case ClearPortFeature: - chDbgAssert(windex == 1, "invalid windex"); + osalDbgAssert(windex == 1, "invalid windex"); osalSysLock(); switch (wvalue) { case USBH_PORT_FEAT_ENABLE: case USBH_PORT_FEAT_SUSPEND: case USBH_PORT_FEAT_POWER: - chDbgAssert(0, "unimplemented"); /* TODO */ + osalDbgAssert(0, "unimplemented"); /* TODO */ break; case USBH_PORT_FEAT_INDICATOR: - chDbgAssert(0, "unsupported"); + osalDbgAssert(0, "unsupported"); break; case USBH_PORT_FEAT_C_CONNECTION: @@ -1500,30 +1613,18 @@ usbh_urbstatus_t usbh_lld_root_hub_request(USBHDriver *usbh, uint8_t bmRequestTy break; case USBH_PORT_FEAT_C_OVERCURRENT: - usbh->rootport.lld_c_status &= USBH_PORTSTATUS_C_OVERCURRENT; + usbh->rootport.lld_c_status &= ~USBH_PORTSTATUS_C_OVERCURRENT; break; default: osalDbgAssert(0, "invalid wvalue"); break; } - osalOsRescheduleS(); osalSysUnlock(); break; case GetHubDescriptor: - /*dev_dbg(hsotg->dev, "GetHubDescriptor\n"); - hub_desc = (struct usb_hub_descriptor *)buf; - hub_desc->bDescLength = 9; - hub_desc->bDescriptorType = USB_DT_HUB; - hub_desc->bNbrPorts = 1; - hub_desc->wHubCharacteristics = - cpu_to_le16(HUB_CHAR_COMMON_LPSM | - HUB_CHAR_INDV_PORT_OCPM); - hub_desc->bPwrOn2PwrGood = 1; - hub_desc->bHubContrCurrent = 0; - hub_desc->u.hs.DeviceRemovable[0] = 0; - hub_desc->u.hs.DeviceRemovable[1] = 0xff;*/ + osalDbgAssert(0, "unsupported"); break; case GetHubStatus: @@ -1532,26 +1633,25 @@ usbh_urbstatus_t usbh_lld_root_hub_request(USBHDriver *usbh, uint8_t bmRequestTy break; case GetPortStatus: - chDbgAssert(windex == 1, "invalid windex"); + osalDbgAssert(windex == 1, "invalid windex"); osalDbgCheck(wlength >= 4); osalSysLock(); *(uint32_t *)buf = usbh->rootport.lld_status | (usbh->rootport.lld_c_status << 16); - osalOsRescheduleS(); osalSysUnlock(); break; case SetHubFeature: - chDbgAssert(0, "unsupported"); + osalDbgAssert(0, "unsupported"); break; case SetPortFeature: - chDbgAssert(windex == 1, "invalid windex"); + osalDbgAssert(windex == 1, "invalid windex"); switch (wvalue) { case USBH_PORT_FEAT_TEST: case USBH_PORT_FEAT_SUSPEND: case USBH_PORT_FEAT_POWER: - chDbgAssert(0, "unimplemented"); /* TODO */ + osalDbgAssert(0, "unimplemented"); /* TODO */ break; case USBH_PORT_FEAT_RESET: { @@ -1560,18 +1660,35 @@ usbh_urbstatus_t usbh_lld_root_hub_request(USBHDriver *usbh, uint8_t bmRequestTy uint32_t hprt; otg->PCGCCTL = 0; hprt = otg->HPRT; + if (hprt & HPRT_PENA) { + /* This can occur when the OTG core doesn't generate traffic + * despite reporting a successful por enable. */ + uerr("Detected enabled port; resetting OTG core"); + otg->GAHBCFG = 0; + osalThreadSleepS(OSAL_MS2I(20)); + _usbh_start(usbh); /* this effectively resets the core */ + osalThreadSleepS(OSAL_MS2I(100)); /* during this delay, the core generates connect ISR */ + uinfo("OTG reset ended"); + if (otg->HPRT & HPRT_PCSTS) { + /* if the device is still connected, don't report a C_CONNECTION flag, which would cause + * the upper layer to abort enumeration */ + uinfo("Clear connection change flag"); + usbh->rootport.lld_c_status &= ~USBH_PORTSTATUS_C_CONNECTION; + } + } /* note: writing PENA = 1 actually disables the port */ - hprt &= ~(HPRT_PSUSP | HPRT_PENA | HPRT_PCDET | HPRT_PENCHNG | HPRT_POCCHNG ); + hprt &= ~(HPRT_PSUSP | HPRT_PENA | HPRT_PCDET | HPRT_PENCHNG | HPRT_POCCHNG); + while ((otg->GRSTCTL & GRSTCTL_AHBIDL) == 0); otg->HPRT = hprt | HPRT_PRST; - osalThreadSleepS(MS2ST(60)); + osalThreadSleepS(OSAL_MS2I(15)); otg->HPRT = hprt; + osalThreadSleepS(OSAL_MS2I(10)); usbh->rootport.lld_c_status |= USBH_PORTSTATUS_C_RESET; - osalOsRescheduleS(); osalSysUnlock(); } break; case USBH_PORT_FEAT_INDICATOR: - chDbgAssert(0, "unsupported"); + osalDbgAssert(0, "unsupported"); break; default: @@ -1589,16 +1706,7 @@ usbh_urbstatus_t usbh_lld_root_hub_request(USBHDriver *usbh, uint8_t bmRequestTy } uint8_t usbh_lld_roothub_get_statuschange_bitmap(USBHDriver *usbh) { - osalSysLock(); - if (usbh->rootport.lld_c_status) { - osalOsRescheduleS(); - osalSysUnlock(); - return 1 << 1; - } - osalOsRescheduleS(); - osalSysUnlock(); - return 0; + return usbh->rootport.lld_c_status ? (1 << 1) : 0; } - #endif diff --git a/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.h b/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.h index e8df749..fd7f4e0 100644 --- a/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.h +++ b/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.h @@ -1,6 +1,6 @@ /* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - Copyright (C) 2015 Diego Ismirlian, TISA, (dismirlian (at) google's mail) + ChibiOS - Copyright (C) 2006..2017 Giovanni Di Sirio + Copyright (C) 2015..2017 Diego Ismirlian, (dismirlian (at) google's mail) Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,8 +15,8 @@ limitations under the License. */ -#ifndef USBH_LLD_H_ -#define USBH_LLD_H_ +#ifndef HAL_USBH_LLD_H +#define HAL_USBH_LLD_H #include "hal.h" @@ -63,6 +63,8 @@ typedef struct stm32_hc_management { #define _usbhdriver_ll_data \ stm32_otg_t *otg; \ + /* low-speed port reset bug */ \ + bool check_ls_activity; \ /* channels */ \ uint8_t channels_number; \ stm32_hc_management_t channels[STM32_OTG2_CHANNELS_NUMBER]; \ @@ -127,27 +129,37 @@ typedef struct stm32_hc_management { "use USBH_DEFINE_BUFFER() to declare the IO buffers"); \ } while (0) - - void usbh_lld_init(void); void usbh_lld_start(USBHDriver *usbh); void usbh_lld_ep_object_init(usbh_ep_t *ep); void usbh_lld_ep_open(usbh_ep_t *ep); void usbh_lld_ep_close(usbh_ep_t *ep); +bool usbh_lld_ep_reset(usbh_ep_t *ep); void usbh_lld_urb_submit(usbh_urb_t *urb); bool usbh_lld_urb_abort(usbh_urb_t *urb, usbh_urbstatus_t status); usbh_urbstatus_t usbh_lld_root_hub_request(USBHDriver *usbh, uint8_t bmRequestType, uint8_t bRequest, uint16_t wvalue, uint16_t windex, uint16_t wlength, uint8_t *buf); uint8_t usbh_lld_roothub_get_statuschange_bitmap(USBHDriver *usbh); -#define usbh_lld_epreset(ep) do {(ep)->dt_mask = HCTSIZ_DPID_DATA0;} while (0); - #ifdef __IAR_SYSTEMS_ICC__ -#define USBH_LLD_DEFINE_BUFFER(type, name) type name +#define USBH_LLD_DEFINE_BUFFER(var) _Pragma("data_alignment=4") var +#define USBH_LLD_DECLARE_STRUCT_MEMBER_H1(x, y) x ## y +#define USBH_LLD_DECLARE_STRUCT_MEMBER_H2(x, y) USBH_LLD_DECLARE_STRUCT_MEMBER_H1(x, y) +#define USBH_LLD_DECLARE_STRUCT_MEMBER(member) unsigned int USBH_LLD_DECLARE_STRUCT_MEMBER_H2(dummy_align_, __COUNTER__); member #else -#define USBH_LLD_DEFINE_BUFFER(type, name) type name __attribute__((aligned(4))) +#define USBH_LLD_DEFINE_BUFFER(var) var __attribute__((aligned(4))) +#define USBH_LLD_DECLARE_STRUCT_MEMBER(member) member __attribute__((aligned(4))) +#endif + + +#if STM32_USBH_USE_OTG1 +extern USBHDriver USBHD1; +#endif + +#if STM32_USBH_USE_OTG2 +extern USBHDriver USBHD2; #endif #endif -#endif /* USBH_LLD_H_ */ +#endif /* HAL_USBH_LLD_H */ diff --git a/os/hal/ports/STM32/STM32F0xx/platform.mk b/os/hal/ports/STM32/STM32F0xx/platform.mk index 377acdf..0102162 100644 --- a/os/hal/ports/STM32/STM32F0xx/platform.mk +++ b/os/hal/ports/STM32/STM32F0xx/platform.mk @@ -2,7 +2,7 @@ include ${CHIBIOS}/os/hal/ports/STM32/STM32F0xx/platform.mk PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c \ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c PLATFORMINC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1 \ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1 \ diff --git a/os/hal/ports/STM32/STM32F3xx/platform.mk b/os/hal/ports/STM32/STM32F3xx/platform.mk index 92f033c..910fb1f 100644 --- a/os/hal/ports/STM32/STM32F3xx/platform.mk +++ b/os/hal/ports/STM32/STM32F3xx/platform.mk @@ -4,7 +4,9 @@ PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c \ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c \ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c \ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/COMPv1/hal_comp_lld.c \ PLATFORMINC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1 \ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1 \ + ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/COMPv1 \ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD diff --git a/os/hal/ports/STM32/STM32F7xx/platform.mk b/os/hal/ports/STM32/STM32F7xx/platform.mk new file mode 100644 index 0000000..2f9392f --- /dev/null +++ b/os/hal/ports/STM32/STM32F7xx/platform.mk @@ -0,0 +1,9 @@ +include ${CHIBIOS}/os/hal/ports/STM32/STM32F7xx/platform.mk + +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.c \ + ${CHIBIOS_CONTRIB}/os/hal/src/hal_fsmc_sdram.c + +PLATFORMINC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1 \ + ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD diff --git a/os/hal/ports/STM32/STM32L4xx/platform.mk b/os/hal/ports/STM32/STM32L4xx/platform.mk new file mode 100644 index 0000000..b9bbfea --- /dev/null +++ b/os/hal/ports/STM32/STM32L4xx/platform.mk @@ -0,0 +1,21 @@ +include ${CHIBIOS}/os/hal/ports/STM32/STM32L4xx/platform.mk
+
+PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/DMA2Dv1/hal_stm32_dma2d.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1/hal_nand_lld.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1/hal_fsmc_sram.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_eicu_lld.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_timcap_lld.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/hal_qei_lld.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/USBHv1/hal_usbh_lld.c \
+ ${CHIBIOS_CONTRIB}/os/hal/src/hal_fsmc_sdram.c
+
+PLATFORMINC += ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1 \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/DMA2Dv1 \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/FSMCv1 \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/LTDCv1 \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1 \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/USBHv1 \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD
diff --git a/os/hal/ports/TIVA/LLD/ADC/driver.mk b/os/hal/ports/TIVA/LLD/ADC/driver.mk new file mode 100644 index 0000000..5a1c80b --- /dev/null +++ b/os/hal/ports/TIVA/LLD/ADC/driver.mk @@ -0,0 +1,9 @@ +ifeq ($(USE_SMART_BUILD),yes) +ifneq ($(findstring HAL_USE_ADC TRUE,$(HALCONF)),) +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.c +endif +else +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.c +endif + +PLATFORMINC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/ADC diff --git a/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.c b/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.c new file mode 100644 index 0000000..6c1be30 --- /dev/null +++ b/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.c @@ -0,0 +1,351 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file hal_adc_lld.c + * @brief PLATFORM ADC subsystem low level driver source. + * + * @addtogroup ADC + * @{ + */ + +#include "hal.h" + +#if (HAL_USE_ADC == TRUE) || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/** @brief ADC0 driver identifier.*/ +#if TIVA_ADC_USE_ADC0 || defined(__DOXYGEN__) +ADCDriver ADCD1; +#endif + +/** @brief ADC1 driver identifier.*/ +#if TIVA_ADC_USE_ADC1 || defined(__DOXYGEN__) +ADCDriver ADCD2; +#endif + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +/** + * @brief Common IRQ handler. + * + * @param[in] adcp pointer to the @p ADCDriver object + */ +static void serve_interrupt(ADCDriver *adcp) +{ + tiva_udma_table_entry_t *pri = &udmaControlTable.primary[adcp->dmanr]; + tiva_udma_table_entry_t *alt = &udmaControlTable.alternate[adcp->dmanr]; + + if ((pri->chctl & UDMA_CHCTL_XFERMODE_M) == UDMA_CHCTL_XFERMODE_STOP) { + /* Primary is used only for circular transfers */ + if (adcp->grpp->circular) { + if (adcp->depth > 1) { + _adc_isr_half_code(adcp); + } + + /* Reconfigure DMA for new lower half transfer */ + pri->chctl = adcp->prictl; + } + } + + if ((alt->chctl & UDMA_CHCTL_XFERMODE_M) == UDMA_CHCTL_XFERMODE_STOP) { + /* Alternate is used for both linear and circular transfers */ + _adc_isr_full_code(adcp); + + if (adcp->grpp->circular) { + /* Reconfigure DMA for new upper half transfer */ + alt->chctl = adcp->altctl; + } + } +} + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + +#if TIVA_ADC_USE_ADC0 +/** + * @brief ADC0 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_ADC0_SEQ0_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + serve_interrupt(&ADCD1); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_ADC_USE_ADC1 +/** + * @brief ADC1 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_ADC1_SEQ0_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + serve_interrupt(&ADCD2); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/** + * @brief Low level ADC driver initialization. + * + * @notapi + */ +void adc_lld_init(void) +{ +#if TIVA_ADC_USE_ADC0 + /* Driver initialization.*/ + adcObjectInit(&ADCD1); + ADCD1.adc = ADC0_BASE; + ADCD1.dmanr = TIVA_ADC_ADC0_SS0_UDMA_CHANNEL; + ADCD1.chnmap = TIVA_ADC_ADC0_SS0_UDMA_MAPPING; +#endif + +#if TIVA_ADC_USE_ADC1 + /* Driver initialization.*/ + adcObjectInit(&ADCD2); + ADCD2.adc = ADC1_BASE; + ADCD2.dmanr = TIVA_ADC_ADC1_SS0_UDMA_CHANNEL; + ADCD2.chnmap = TIVA_ADC_ADC1_SS0_UDMA_MAPPING; +#endif +} + +/** + * @brief Configures and activates the ADC peripheral. + * + * @param[in] adcp pointer to the @p ADCDriver object + * + * @notapi + */ +void adc_lld_start(ADCDriver *adcp) +{ + if (adcp->state == ADC_STOP) { + /* Enables the peripheral.*/ +#if TIVA_ADC_USE_ADC0 + if (&ADCD1 == adcp) { + bool b; + b = udmaChannelAllocate(adcp->dmanr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCADC) |= (1 << 0); + + while (!(HWREG(SYSCTL_PRADC) & (1 << 0))) + ; + + /* Only sequencer 0 is supported */ + nvicEnableVector(TIVA_ADC0_SEQ0_NUMBER, TIVA_ADC0_SEQ0_PRIORITY); + } +#endif + +#if TIVA_ADC_USE_ADC1 + if (&ADCD2 == adcp) { + bool b; + b = udmaChannelAllocate(adcp->dmanr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCADC) |= (1 << 1); + + while (!(HWREG(SYSCTL_PRADC) & (1 << 1))) + ; + + /* Only sequencer 0 is supported */ + nvicEnableVector(TIVA_ADC1_SEQ0_NUMBER, TIVA_ADC1_SEQ0_PRIORITY); + } +#endif + + HWREG(UDMA_CHMAP0 + (adcp->dmanr / 8) * 4) |= (adcp->chnmap << (adcp->dmanr % 8)); + } +} + +/** + * @brief Deactivates the ADC peripheral. + * + * @param[in] adcp pointer to the @p ADCDriver object + * + * @notapi + */ +void adc_lld_stop(ADCDriver *adcp) +{ + if (adcp->state == ADC_READY) { + /* Resets the peripheral.*/ + + udmaChannelRelease(adcp->dmanr); + + /* Disables the peripheral.*/ +#if TIVA_ADC_USE_ADC0 + if (&ADCD1 == adcp) { + nvicDisableVector(TIVA_ADC0_SEQ0_NUMBER); + } +#endif + +#if TIVA_ADC_USE_ADC1 + if (&ADCD2 == adcp) { + nvicDisableVector(TIVA_ADC1_SEQ0_NUMBER); + } +#endif + } +} + +/** + * @brief Starts an ADC conversion. + * + * @param[in] adcp pointer to the @p ADCDriver object + * + * @notapi + */ +void adc_lld_start_conversion(ADCDriver *adcp) +{ + uint32_t adc = adcp->adc; + tiva_udma_table_entry_t *primary = &udmaControlTable.primary[adcp->dmanr]; + tiva_udma_table_entry_t *alternate = &udmaControlTable.alternate[adcp->dmanr]; + + /* Disable sample sequencer 0 */ + HWREG(adc + ADC_O_ACTSS) &= (1 << 0); + + /* Configure the sample sequencer 0 trigger */ + HWREG(adc + ADC_O_EMUX) = adcp->grpp->emux & 0xff; + + /* If pwm is used as trigger, select in which block the pwm generator is + located */ + if (adcp->grpp->emux >= 6 && adcp->grpp->emux <= 9) { + HWREG(adc + ADC_O_TSSEL) = 0; + } + + /* For each sample in the sample sequencer, select the input source */ + HWREG(adc + ADC_O_SSMUX0) = adcp->grpp->ssmux; + + /* Configure the sample control bits */ + HWREG(adc + ADC_O_SSCTL0) = adcp->grpp->ssctl | 0x44444444; /* Enforce IEn bits */ + + /* Alternate source endpoint is the same for all transfers */ + alternate->srcendp = (void *)(adcp->adc + ADC_O_SSFIFO0); + + /* Configure DMA */ + if ((adcp->grpp->circular) && (adcp->depth > 1)) { + /* Configure DMA in ping-pong mode. + Ping (1st half) is configured in the primary control structure. + Pong (2nd half) is configured in the alternate control structure. */ + + uint32_t ctl; + + /* configure the primary source endpoint */ + primary->srcendp = (void *)(adcp->adc + ADC_O_SSFIFO0); + + /* sample buffer is split in half, the upper half is used here */ + primary->dstendp = (void *)(adcp->samples + + (adcp->grpp->num_channels * adcp->depth / 2) - 1); + /* the lower half is used here */ + alternate->dstendp = (void *)(adcp->samples + + (adcp->grpp->num_channels * adcp->depth) - 1); + + ctl = UDMA_CHCTL_DSTSIZE_32 | UDMA_CHCTL_DSTINC_32 | + UDMA_CHCTL_SRCSIZE_32 | UDMA_CHCTL_SRCINC_NONE | + UDMA_CHCTL_ARBSIZE_1 | + UDMA_CHCTL_XFERSIZE(adcp->grpp->num_channels * adcp->depth / 2) | + UDMA_CHCTL_XFERMODE_PINGPONG; + + adcp->prictl = ctl; + adcp->altctl = ctl; + + dmaChannelPrimary(adcp->dmanr); + } + else { + /* Configure the DMA in basic mode. + This is used for both circular buffers with a depth of 1 and linear + buffers.*/ + alternate->dstendp = (void *)(adcp->samples + + (adcp->grpp->num_channels * adcp->depth) - 1); + adcp->prictl = UDMA_CHCTL_XFERMODE_STOP; + adcp->altctl = UDMA_CHCTL_DSTSIZE_32 | UDMA_CHCTL_DSTINC_32 | + UDMA_CHCTL_SRCSIZE_32 | UDMA_CHCTL_SRCINC_NONE | + UDMA_CHCTL_ARBSIZE_1 | + UDMA_CHCTL_XFERSIZE(adcp->grpp->num_channels * adcp->depth) | + UDMA_CHCTL_XFERMODE_BASIC; + + dmaChannelAlternate(adcp->dmanr); + } + + /* Configure primary and alternate channel control fields */ + primary->chctl = adcp->prictl; + alternate->chctl = adcp->altctl; + + /* Configure DMA channel */ + dmaChannelBurstOnly(adcp->dmanr); + dmaChannelPriorityDefault(adcp->dmanr); + dmaChannelEnableRequest(adcp->dmanr); + + /* Enable DMA channel */ + dmaChannelEnable(adcp->dmanr); + + /* Enable the sample sequencer */ + HWREG(adc + ADC_O_ACTSS) |= (1 << 0); + + /* Enable DMA on the sample sequencer, is this for 129x only?*/ + //HWREG(adc + ADC_O_ACTSS) |= (1 << 8); + + /* Start conversion if configured for CPU trigger */ + if ((adcp->grpp->emux & 0xff) == 0) { + HWREG(adc + ADC_O_PSSI) = ADC_PSSI_SS0; + } +} + +/** + * @brief Stops an ongoing conversion. + * + * @param[in] adcp pointer to the @p ADCDriver object + * + * @notapi + */ +void adc_lld_stop_conversion(ADCDriver *adcp) +{ + uint32_t adc = adcp->adc; + + /* Stop ongoing DMA transfer */ + dmaChannelDisable(adcp->dmanr); + + /* Stop ongoing ADC conversion by disabling the active sample sequencer */ + HWREG(adc + ADC_O_ACTSS) &= ~(1 << 0); +} + +#endif /* HAL_USE_ADC == TRUE */ + +/** @} */ diff --git a/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.h b/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.h new file mode 100644 index 0000000..81916b8 --- /dev/null +++ b/os/hal/ports/TIVA/LLD/ADC/hal_adc_lld.h @@ -0,0 +1,230 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file hal_adc_lld.h + * @brief PLATFORM ADC subsystem low level driver header. + * + * @addtogroup ADC + * @{ + */ + +#ifndef HAL_ADC_LLD_H +#define HAL_ADC_LLD_H + +#if (HAL_USE_ADC == TRUE) || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @name PLATFORM configuration options + * @{ + */ +/** + * @brief ADC1 driver enable switch. + * @details If set to @p TRUE the support for ADC1 is included. + * @note The default is @p FALSE. + */ +#if !defined(PLATFORM_ADC_USE_ADC1) || defined(__DOXYGEN__) +#define PLATFORM_ADC_USE_ADC1 FALSE +#endif +/** @} */ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +#if !defined(TIVA_UDMA_REQUIRED) +#define TIVA_UDMA_REQUIRED +#endif + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/** + * @brief ADC sample data type. + */ +typedef uint32_t adcsample_t; + +/** + * @brief Channels number in a conversion group. + */ +typedef uint16_t adc_channels_num_t; + +/** + * @brief Possible ADC failure causes. + * @note Error codes are architecture dependent and should not relied + * upon. + */ +typedef enum { + ADC_ERR_DMAFAILURE = 0, /**< DMA operations failure. */ + ADC_ERR_OVERFLOW = 1, /**< ADC overflow condition. */ + ADC_ERR_AWD = 2 /**< Analog watchdog triggered. */ +} adcerror_t; + +/** + * @brief Type of a structure representing an ADC driver. + */ +typedef struct ADCDriver ADCDriver; + +/** + * @brief ADC notification callback type. + * + * @param[in] adcp pointer to the @p ADCDriver object triggering the + * callback + * @param[in] buffer pointer to the most recent samples data + * @param[in] n number of buffer rows available starting from @p buffer + */ +typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n); + +/** + * @brief ADC error callback type. + * + * @param[in] adcp pointer to the @p ADCDriver object triggering the + * callback + * @param[in] err ADC error code + */ +typedef void (*adcerrorcallback_t)(ADCDriver *adcp, adcerror_t err); + +/** + * @brief Conversion group configuration structure. + * @details This implementation-dependent structure describes a conversion + * operation. + * @note The use of this configuration structure requires knowledge of + * PLATFORM ADC cell registers interface, please refer to the PLATFORM + * reference manual for details. + */ +typedef struct { + /** + * @brief Enables the circular buffer mode for the group. + */ + bool circular; + /** + * @brief Number of the analog channels belonging to the conversion group. + */ + adc_channels_num_t num_channels; + /** + * @brief Callback function associated to the group or @p NULL. + */ + adccallback_t end_cb; + /** + * @brief Error callback or @p NULL. + */ + adcerrorcallback_t error_cb; + /* End of the mandatory fields.*/ + uint32_t emux; + uint32_t ssmux; + uint32_t ssctl; +} ADCConversionGroup; + +/** + * @brief Driver configuration structure. + * @note It could be empty on some architectures. + */ +typedef struct { + uint32_t dummy; +} ADCConfig; + +/** + * @brief Structure representing an ADC driver. + */ +struct ADCDriver { + /** + * @brief Driver state. + */ + adcstate_t state; + /** + * @brief Current configuration data. + */ + const ADCConfig *config; + /** + * @brief Current samples buffer pointer or @p NULL. + */ + adcsample_t *samples; + /** + * @brief Current samples buffer depth or @p 0. + */ + size_t depth; + /** + * @brief Current conversion group pointer or @p NULL. + */ + const ADCConversionGroup *grpp; +#if (ADC_USE_WAIT == TRUE) || defined(__DOXYGEN__) + /** + * @brief Waiting thread. + */ + thread_reference_t thread; +#endif +#if (ADC_USE_MUTUAL_EXCLUSION == TRUE) || defined(__DOXYGEN__) + /** + * @brief Mutex protecting the peripheral. + */ + mutex_t mutex; +#endif +#if defined(ADC_DRIVER_EXT_FIELDS) + ADC_DRIVER_EXT_FIELDS +#endif + /* End of the mandatory fields.*/ + /** + * @brief Pointer to the ADC registers block. + */ + uint32_t adc; + uint8_t dmanr; + uint8_t chnmap; + uint32_t prictl; + uint32_t altctl; +}; + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#if TIVA_ADC_USE_ADC0 && !defined(__DOXYGEN__) +extern ADCDriver ADCD1; +#endif + +#if TIVA_ADC_USE_ADC1 && !defined(__DOXYGEN__) +extern ADCDriver ADCD2; +#endif + +#ifdef __cplusplus +extern "C" { +#endif + void adc_lld_init(void); + void adc_lld_start(ADCDriver *adcp); + void adc_lld_stop(ADCDriver *adcp); + void adc_lld_start_conversion(ADCDriver *adcp); + void adc_lld_stop_conversion(ADCDriver *adcp); +#ifdef __cplusplus +} +#endif + +#endif /* HAL_USE_ADC == TRUE */ + +#endif /* HAL_ADC_LLD_H */ + +/** @} */ diff --git a/os/hal/ports/TIVA/LLD/GPIO/driver.mk b/os/hal/ports/TIVA/LLD/GPIO/driver.mk new file mode 100644 index 0000000..486fe73 --- /dev/null +++ b/os/hal/ports/TIVA/LLD/GPIO/driver.mk @@ -0,0 +1,9 @@ +ifeq ($(USE_SMART_BUILD),yes) +ifneq ($(findstring HAL_USE_PAL TRUE,$(HALCONF)),) +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPIO/hal_pal_lld.c +endif +else +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPIO/hal_pal_lld.c +endif + +PLATFORMINC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPIO diff --git a/os/hal/ports/TIVA/LLD/GPIO/hal_pal_lld.c b/os/hal/ports/TIVA/LLD/GPIO/hal_pal_lld.c new file mode 100644 index 0000000..7a222e4 --- /dev/null +++ b/os/hal/ports/TIVA/LLD/GPIO/hal_pal_lld.c @@ -0,0 +1,1135 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file GPIO/hal_pal_lld.c + * @brief TM4C123x/TM4C129x PAL subsystem low level driver. + * + * @addtogroup PAL + * @{ + */ + +#include "hal.h" + +#if HAL_USE_PAL || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +#if TIVA_HAS_GPIOA || defined(__DOXYGEN__) +#define GPIOA_BIT (1 << 0) +#else +#define GPIOA_BIT 0 +#endif + +#if TIVA_HAS_GPIOB || defined(__DOXYGEN__) +#define GPIOB_BIT (1 << 1) +#else +#define GPIOB_BIT 0 +#endif + +#if TIVA_HAS_GPIOC || defined(__DOXYGEN__) +#define GPIOC_BIT (1 << 2) +#else +#define GPIOC_BIT 0 +#endif + +#if TIVA_HAS_GPIOD || defined(__DOXYGEN__) +#define GPIOD_BIT (1 << 3) +#else +#define GPIOD_BIT 0 +#endif + +#if TIVA_HAS_GPIOE || defined(__DOXYGEN__) +#define GPIOE_BIT (1 << 4) +#else +#define GPIOE_BIT 0 +#endif + +#if TIVA_HAS_GPIOF || defined(__DOXYGEN__) +#define GPIOF_BIT (1 << 5) +#else +#define GPIOF_BIT 0 +#endif + +#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) +#define GPIOG_BIT (1 << 6) +#else +#define GPIOG_BIT 0 +#endif + +#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) +#define GPIOH_BIT (1 << 7) +#else +#define GPIOH_BIT 0 +#endif + +#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) +#define GPIOJ_BIT (1 << 8) +#else +#define GPIOJ_BIT 0 +#endif + +#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) +#define GPIOK_BIT (1 << 9) +#else +#define GPIOK_BIT 0 +#endif + +#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) +#define GPIOL_BIT (1 << 10) +#else +#define GPIOL_BIT 0 +#endif + +#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) +#define GPIOM_BIT (1 << 11) +#else +#define GPIOM_BIT 0 +#endif + +#if TIVA_HAS_GPION || defined(__DOXYGEN__) +#define GPION_BIT (1 << 12) +#else +#define GPION_BIT 0 +#endif + +#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) +#define GPIOP_BIT (1 << 13) +#else +#define GPIOP_BIT 0 +#endif + +#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) +#define GPIOQ_BIT (1 << 14) +#else +#define GPIOQ_BIT 0 +#endif + +#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) +#define GPIOR_BIT (1 << 15) +#else +#define GPIOR_BIT 0 +#endif + +#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) +#define GPIOS_BIT (1 << 16) +#else +#define GPIOS_BIT 0 +#endif + +#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) +#define GPIOT_BIT (1 << 17) +#else +#define GPIOT_BIT 0 +#endif + +#define RCGCGPIO_MASK (GPIOA_BIT | GPIOB_BIT | GPIOC_BIT | GPIOD_BIT | \ + GPIOE_BIT | GPIOF_BIT | GPIOG_BIT | GPIOH_BIT | \ + GPIOJ_BIT | GPIOK_BIT | GPIOL_BIT | GPIOM_BIT | \ + GPION_BIT | GPIOP_BIT | GPIOQ_BIT | GPIOR_BIT | \ + GPIOS_BIT | GPIOT_BIT) + +#define GPIOHBCTL_MASK (GPIOA_BIT | GPIOB_BIT | GPIOC_BIT | GPIOD_BIT | \ + GPIOE_BIT | GPIOF_BIT | GPIOG_BIT | GPIOH_BIT | \ + GPIOJ_BIT) + +#define GPIOC_JTAG_MASK (0x0F) +#define GPIOD_NMI_MASK (0x80) +#define GPIOF_NMI_MASK (0x01) + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/** + * @brief Event records for all GPIO channels. + */ +palevent_t _pal_events[TIVA_GPIO_PINS]; + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +/** + * @brief Initializes the port with the port configuration. + * + * @param[in] port the port identifier + * @param[in] config the port configuration + */ +static void gpio_init(ioportid_t port, const tiva_gpio_setup_t *config) +{ + HWREG(port + GPIO_O_DATA) = config->data; + HWREG(port + GPIO_O_DIR) = config->dir; + HWREG(port + GPIO_O_AFSEL) = config->afsel; + HWREG(port + GPIO_O_DR2R) = config->dr2r; + HWREG(port + GPIO_O_DR4R) = config->dr4r; + HWREG(port + GPIO_O_DR8R) = config->dr8r; + HWREG(port + GPIO_O_ODR) = config->odr; + HWREG(port + GPIO_O_PUR) = config->pur; + HWREG(port + GPIO_O_PDR) = config->pdr; + HWREG(port + GPIO_O_SLR) = config->slr; + HWREG(port + GPIO_O_DEN) = config->den; + HWREG(port + GPIO_O_AMSEL) = config->amsel; + HWREG(port + GPIO_O_PCTL) = config->pctl; +} + +/** + * @brief Unlocks the masked pins of the GPIO peripheral. + * @note This function is only useful for PORTC0-3, PORTD7 and PORTF0. + * + * @param[in] port the port identifier + * @param[in] mask the pin mask + */ +static void gpio_unlock(ioportid_t port, ioportmask_t mask) +{ + + HWREG(port + GPIO_O_LOCK) = GPIO_LOCK_KEY; + HWREG(port + GPIO_O_CR) = mask; +} + +#if PAL_USE_CALLBACKS || PAL_USE_WAIT +/** + * @brief Enables GPIO IRQ sources. + */ +static void gpio_irq_enable(void) +{ +#if TIVA_HAS_GPIOA + nvicEnableVector(TIVA_GPIOA_NUMBER, TIVA_PAL_GPIOA_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOB + nvicEnableVector(TIVA_GPIOB_NUMBER, TIVA_PAL_GPIOB_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOC + nvicEnableVector(TIVA_GPIOC_NUMBER, TIVA_PAL_GPIOC_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOD + nvicEnableVector(TIVA_GPIOD_NUMBER, TIVA_PAL_GPIOD_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOE + nvicEnableVector(TIVA_GPIOE_NUMBER, TIVA_PAL_GPIOE_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOF + nvicEnableVector(TIVA_GPIOF_NUMBER, TIVA_PAL_GPIOF_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOG + nvicEnableVector(TIVA_GPIOG_NUMBER, TIVA_PAL_GPIOG_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOH + nvicEnableVector(TIVA_GPIOH_NUMBER, TIVA_PAL_GPIOH_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOJ + nvicEnableVector(TIVA_GPIOJ_NUMBER, TIVA_PAL_GPIOJ_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOK + nvicEnableVector(TIVA_GPIOK_NUMBER, TIVA_PAL_GPIOK_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOL + nvicEnableVector(TIVA_GPIOL_NUMBER, TIVA_PAL_GPIOL_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOM + nvicEnableVector(TIVA_GPIOM_NUMBER, TIVA_PAL_GPIOM_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPION + nvicEnableVector(TIVA_GPION_NUMBER, TIVA_PAL_GPION_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOP + nvicEnableVector(TIVA_GPIOP0_NUMBER, TIVA_PAL_GPIOP0_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOP1_NUMBER, TIVA_PAL_GPIOP1_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOP2_NUMBER, TIVA_PAL_GPIOP2_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOP3_NUMBER, TIVA_PAL_GPIOP3_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOP4_NUMBER, TIVA_PAL_GPIOP4_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOP5_NUMBER, TIVA_PAL_GPIOP5_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOP6_NUMBER, TIVA_PAL_GPIOP6_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOP7_NUMBER, TIVA_PAL_GPIOP7_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOQ + nvicEnableVector(TIVA_GPIOQ0_NUMBER, TIVA_PAL_GPIOQ0_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOQ1_NUMBER, TIVA_PAL_GPIOQ1_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOQ2_NUMBER, TIVA_PAL_GPIOQ2_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOQ3_NUMBER, TIVA_PAL_GPIOQ3_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOQ4_NUMBER, TIVA_PAL_GPIOQ4_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOQ5_NUMBER, TIVA_PAL_GPIOQ5_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOQ6_NUMBER, TIVA_PAL_GPIOQ6_IRQ_PRIORITY); + nvicEnableVector(TIVA_GPIOQ7_NUMBER, TIVA_PAL_GPIOQ7_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOR + nvicEnableVector(TIVA_GPIOR_NUMBER, TIVA_PAL_GPIOR_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOS + nvicEnableVector(TIVA_GPIOS_NUMBER, TIVA_PAL_GPIOS_IRQ_PRIORITY); +#endif +#if TIVA_HAS_GPIOT + nvicEnableVector(TIVA_GPIOT_NUMBER, TIVA_PAL_GPIOT_IRQ_PRIORITY); +#endif +} +#endif + +#define gpio_serve_irq(mask, pin, channel) { \ + \ + if ((mask) & (1U << (pin))) { \ + _pal_isr_code(channel); \ + } \ +} + +/** + * @brief Generic interrupt serving code for multiple pins per interrupt + * handler. + */ +#define ext_lld_serve_port_interrupt(gpio, start) \ + do { \ + uint32_t mis = HWREG(gpio + GPIO_O_MIS); \ + \ + HWREG(gpio + GPIO_O_ICR) = mis; \ + \ + gpio_serve_irq(mis, 0, start + 0); \ + gpio_serve_irq(mis, 1, start + 1); \ + gpio_serve_irq(mis, 2, start + 2); \ + gpio_serve_irq(mis, 3, start + 3); \ + gpio_serve_irq(mis, 4, start + 4); \ + gpio_serve_irq(mis, 5, start + 5); \ + gpio_serve_irq(mis, 6, start + 6); \ + gpio_serve_irq(mis, 7, start + 7); \ + } while (0); + +/** + * @brief Generic interrupt serving code for single pin per interrupt + * handler. + */ +#define ext_lld_serve_pin_interrupt(gpio, start, pin) \ + do { \ + HWREG(gpio + GPIO_O_ICR) = (1 << pin); \ + gpio_serve_irq((1 << pin), pin, start) \ + } while (0); + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + +#if TIVA_HAS_GPIOA || defined(__DOXYGEN__) +/** + * @brief GPIOA interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOA_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOA, 0); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOB || defined(__DOXYGEN__) +/** + * @brief GPIOB interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOB_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOB, 8); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOC || defined(__DOXYGEN__) +/** + * @brief GPIOC interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOC_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOC, 16); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOD || defined(__DOXYGEN__) +/** + * @brief GPIOD interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOD_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOD, 24); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOE || defined(__DOXYGEN__) +/** + * @brief GPIOE interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOE_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOE, 32); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOF || defined(__DOXYGEN__) +/** + * @brief GPIOF interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOF_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOF, 40); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) +/** + * @brief GPIOG interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOG_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOG, 48); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) +/** + * @brief GPIOH interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOH_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOH, 56); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) +/** + * @brief GPIOJ interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOJ_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOJ, 64); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) +/** + * @brief GPIOK interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOK_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOK, 72); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) +/** + * @brief GPIOL interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOL_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOL, 80); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) +/** + * @brief GPIOM interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOM_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOM, 88); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPION || defined(__DOXYGEN__) +/** + * @brief GPION interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPION_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPION, 96); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) +/** + * @brief GPIOP0 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOP0_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOP, 104, 0); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOP1 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOP1_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOP, 105, 1); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOP2 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOP2_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOP, 106, 2); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOP3 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOP3_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOP, 107, 3); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOP4 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOP4_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOP, 108, 4); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOP5 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOP5_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOP, 109, 5); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOP6 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOP6_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOP, 110, 6); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOP7 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOP7_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOP, 111, 7); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) +/** + * @brief GPIOQ0 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOQ0_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOQ, 112, 0); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOQ1 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOQ1_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOQ, 113, 1); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOQ2 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOQ2_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOQ, 114, 2); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOQ3 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOQ3_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOQ, 115, 3); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOQ4 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOQ4_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOQ, 116, 4); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOQ5 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOQ5_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOQ, 117, 5); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOQ6 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOQ6_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOQ, 118, 6); + + OSAL_IRQ_EPILOGUE(); +} + +/** + * @brief GPIOQ7 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOQ7_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_pin_interrupt(GPIOQ, 119, 7); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) +/** + * @brief GPIOR interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOR_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOR, 120); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) +/** + * @brief GPIOS interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOS_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOS, 128); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) +/** + * @brief GPIOT interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_GPIOT_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + ext_lld_serve_port_interrupt(GPIOT, 132); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/** + * @brief Tiva I/O ports configuration. + * @details Ports A-F (G, H, J, K, L, M, N, P, Q, R, S, T) clocks enabled. + * + * @param[in] config the Tiva ports configuration + * + * @notapi + */ +void _pal_lld_init(const PALConfig *config) +{ +#if PAL_USE_CALLBACKS || PAL_USE_WAIT || defined(__DOXYGEN__) + unsigned i; + + for (i = 0; i < TIVA_GPIO_PINS; i++) { + _pal_init_event(i); + } +#endif + + /* + * Enables all GPIO clocks. + */ + HWREG(SYSCTL_RCGCGPIO) = RCGCGPIO_MASK; +#if defined(TM4C123x) + HWREG(SYSCTL_GPIOHBCTL) = GPIOHBCTL_MASK; +#endif + + /* Wait until all GPIO modules are ready */ + while (!((HWREG(SYSCTL_PRGPIO) & RCGCGPIO_MASK) == RCGCGPIO_MASK)) + ; + +#if TIVA_HAS_GPIOA + gpio_init(GPIOA, &config->PAData); +#endif +#if TIVA_HAS_GPIOB + gpio_init(GPIOB, &config->PBData); +#endif +#if TIVA_HAS_GPIOC + /* Unlock JTAG pins.*/ + gpio_unlock(GPIOC, GPIOC_JTAG_MASK); + gpio_init(GPIOC, &config->PCData); +#endif +#if TIVA_HAS_GPIOD + /* Unlock NMI pin.*/ + gpio_unlock(GPIOD, GPIOD_NMI_MASK); + gpio_init(GPIOD, &config->PDData); +#endif +#if TIVA_HAS_GPIOE + gpio_init(GPIOE, &config->PEData); +#endif +#if TIVA_HAS_GPIOF + /* Unlock NMI pin.*/ + gpio_unlock(GPIOF, GPIOF_NMI_MASK); + gpio_init(GPIOF, &config->PFData); +#endif +#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) + gpio_init(GPIOG, &config->PGData); +#endif +#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) + gpio_init(GPIOH, &config->PHData); +#endif +#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) + gpio_init(GPIOJ, &config->PJData); +#endif +#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) + gpio_init(GPIOK, &config->PKData); +#endif +#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) + gpio_init(GPIOL, &config->PLData); +#endif +#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) + gpio_init(GPIOM, &config->PMData); +#endif +#if TIVA_HAS_GPION || defined(__DOXYGEN__) + gpio_init(GPION, &config->PNData); +#endif +#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) + gpio_init(GPIOP, &config->PPData); +#endif +#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) + gpio_init(GPIOQ, &config->PQData); +#endif +#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) + gpio_init(GPIOR, &config->PRData); +#endif +#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) + gpio_init(GPIOS, &config->PSData); +#endif +#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) + gpio_init(GPIOT, &config->PTData); +#endif +#if PAL_USE_CALLBACKS || PAL_USE_WAIT + gpio_irq_enable(); +#endif +} + +/** + * @brief Pads mode setup. + * @details This function programs a pads group belonging to the same port + * with the specified mode. + * + * @param[in] port the port identifier + * @param[in] mask the group mask + * @param[in] mode the mode + * + * @notapi + */ +void _pal_lld_setgroupmode(ioportid_t port, ioportmask_t mask, iomode_t mode) +{ + uint32_t dir = (mode & PAL_TIVA_DIR_MASK) >> 0; + uint32_t afsel = (mode & PAL_TIVA_AFSEL_MASK) >> 1; + uint32_t dr2r = (mode & PAL_TIVA_DR2R_MASK) >> 2; + uint32_t dr4r = (mode & PAL_TIVA_DR4R_MASK) >> 3; + uint32_t dr8r = (mode & PAL_TIVA_DR8R_MASK) >> 4; + uint32_t odr = (mode & PAL_TIVA_ODR_MASK) >> 5; + uint32_t pur = (mode & PAL_TIVA_PUR_MASK) >> 6; + uint32_t pdr = (mode & PAL_TIVA_PDR_MASK) >> 7; + uint32_t slr = (mode & PAL_TIVA_SLR_MASK) >> 8; + uint32_t den = (mode & PAL_TIVA_DEN_MASK) >> 9; + uint32_t amsel = (mode & PAL_TIVA_AMSEL_MASK) >> 10; + uint32_t pctl = (mode & PAL_TIVA_PCTL_MASK) >> 11; + uint32_t bit = 0; + + while(TRUE) { + uint32_t pctl_mask = (7 << (4 * bit)); + uint32_t bit_mask = (1 << bit); + + if ((mask & 1) != 0) { + HWREG(port + GPIO_O_DIR) = (HWREG(port + GPIO_O_DIR) & ~bit_mask) | dir; + HWREG(port + GPIO_O_AFSEL) = (HWREG(port + GPIO_O_AFSEL) & ~bit_mask) | afsel; + HWREG(port + GPIO_O_DR2R) = (HWREG(port + GPIO_O_DR2R) & ~bit_mask) | dr2r; + HWREG(port + GPIO_O_DR4R) = (HWREG(port + GPIO_O_DR4R) & ~bit_mask) | dr4r; + HWREG(port + GPIO_O_DR8R) = (HWREG(port + GPIO_O_DR8R) & ~bit_mask) | dr8r; + HWREG(port + GPIO_O_ODR) = (HWREG(port + GPIO_O_ODR) & ~bit_mask) | odr; + HWREG(port + GPIO_O_PUR) = (HWREG(port + GPIO_O_PUR) & ~bit_mask) | pur; + HWREG(port + GPIO_O_PDR) = (HWREG(port + GPIO_O_PDR) & ~bit_mask) | pdr; + HWREG(port + GPIO_O_SLR) = (HWREG(port + GPIO_O_SLR) & ~bit_mask) | slr; + HWREG(port + GPIO_O_DEN) = (HWREG(port + GPIO_O_DEN) & ~bit_mask) | den; + HWREG(port + GPIO_O_AMSEL) = (HWREG(port + GPIO_O_AMSEL) & ~bit_mask) | amsel; + HWREG(port + GPIO_O_PCTL) = (HWREG(port + GPIO_O_PCTL) & ~pctl_mask) | pctl; + } + + mask >>= 1; + if (!mask) { + return; + } + + dir <<= 1; + afsel <<= 1; + dr2r <<= 1; + dr4r <<= 1; + dr8r <<= 1; + odr <<= 1; + pur <<= 1; + pdr <<= 1; + slr <<= 1; + den <<= 1; + amsel <<= 1; + pctl <<= 4; + + bit++; + } +} + +#if PAL_USE_CALLBACKS || PAL_USE_WAIT || defined(__DOXYGEN__) +/** + * @brief Pad event enable. + * @note Programming an unknown or unsupported mode is silently ignored. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * @param[in] mode pad event mode + * + * @notapi + */ +void _pal_lld_enablepadevent(ioportid_t port, + iopadid_t pad, + ioeventmode_t mode) +{ + //uint8_t portidx; + uint32_t padmask; + + //portidx = (((uint32_t)port - (uint32_t)GPIOA) >> 12) & 0x1FU; + padmask = (1 << pad); + + /* Disable interrupt before changing edge configuration.*/ + HWREG(port + GPIO_O_IM) &= ~padmask; + + /* Configure pin to be edge-sensitive.*/ + HWREG(port + GPIO_O_IS) &= ~(1 << pad); + + /* Configure edges */ + switch(mode & PAL_EVENT_MODE_EDGES_MASK) { + case PAL_EVENT_MODE_BOTH_EDGES: + HWREG(port + GPIO_O_IBE) |= padmask; + break; + case PAL_EVENT_MODE_RISING_EDGE: + HWREG(port + GPIO_O_IBE) &= ~padmask; + HWREG(port + GPIO_O_IEV) &= ~padmask; + break; + case PAL_EVENT_MODE_FALLING_EDGE: + HWREG(port + GPIO_O_IBE) &= ~padmask; + HWREG(port + GPIO_O_IEV) |= padmask; + break; + default: + /* Interrupt is already disabled */ + break; + } + + if (mode & PAL_EVENT_MODE_EDGES_MASK) { + /* Enable interrupt for this pad */ + HWREG(port + GPIO_O_IM) |= padmask; + } +} + +/** + * @brief Pad event disable. + * @details This function disables previously programmed event callbacks. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * + * @notapi + */ +void _pal_lld_disablepadevent(ioportid_t port, iopadid_t pad) +{ + uint8_t portidx; + uint8_t eventidx; + + portidx = (((uint32_t)port - (uint32_t)GPIOA) >> 12) & 0x1FU; + + eventidx = portidx * 8 + pad; + + HWREG(port + GPIO_O_IM) &= ~(1 << pad); + +#if PAL_USE_CALLBACKS || PAL_USE_WAIT + /* Callback cleared and/or thread reset.*/ + _pal_clear_event(eventidx); +#endif +} + +/** + * @brief Disables GPIO IRQ sources. + */ +void pal_lld_disable_irqs(void) +{ +#if TIVA_HAS_GPIOA + nvicDisableVector(TIVA_GPIOA_NUMBER); +#endif +#if TIVA_HAS_GPIOB + nvicDisableVector(TIVA_GPIOB_NUMBER); +#endif +#if TIVA_HAS_GPIOC + nvicDisableVector(TIVA_GPIOC_NUMBER); +#endif +#if TIVA_HAS_GPIOD + nvicDisableVector(TIVA_GPIOD_NUMBER); +#endif +#if TIVA_HAS_GPIOE + nvicDisableVector(TIVA_GPIOE_NUMBER); +#endif +#if TIVA_HAS_GPIOF + nvicDisableVector(TIVA_GPIOF_NUMBER); +#endif +#if TIVA_HAS_GPIOG + nvicDisableVector(TIVA_GPIOG_NUMBER); +#endif +#if TIVA_HAS_GPIOH + nvicDisableVector(TIVA_GPIOH_NUMBER); +#endif +#if TIVA_HAS_GPIOJ + nvicDisableVector(TIVA_GPIOJ_NUMBER); +#endif +#if TIVA_HAS_GPIOK + nvicDisableVector(TIVA_GPIOK_NUMBER); +#endif +#if TIVA_HAS_GPIOL + nvicDisableVector(TIVA_GPIOL_NUMBER); +#endif +#if TIVA_HAS_GPIOM + nvicDisableVector(TIVA_GPIOM_NUMBER); +#endif +#if TIVA_HAS_GPION + nvicDisableVector(TIVA_GPION_NUMBER); +#endif +#if TIVA_HAS_GPIOP + nvicDisableVector(TIVA_GPIOP0_NUMBER); + nvicDisableVector(TIVA_GPIOP1_NUMBER); + nvicDisableVector(TIVA_GPIOP2_NUMBER); + nvicDisableVector(TIVA_GPIOP3_NUMBER); + nvicDisableVector(TIVA_GPIOP4_NUMBER); + nvicDisableVector(TIVA_GPIOP5_NUMBER); + nvicDisableVector(TIVA_GPIOP6_NUMBER); + nvicDisableVector(TIVA_GPIOP7_NUMBER); +#endif +#if TIVA_HAS_GPIOQ + nvicDisableVector(TIVA_GPIOQ0_NUMBER); + nvicDisableVector(TIVA_GPIOQ1_NUMBER); + nvicDisableVector(TIVA_GPIOQ2_NUMBER); + nvicDisableVector(TIVA_GPIOQ3_NUMBER); + nvicDisableVector(TIVA_GPIOQ4_NUMBER); + nvicDisableVector(TIVA_GPIOQ5_NUMBER); + nvicDisableVector(TIVA_GPIOQ6_NUMBER); + nvicDisableVector(TIVA_GPIOQ7_NUMBER); +#endif +#if TIVA_HAS_GPIOR + nvicDisableVector(TIVA_GPIOR_NUMBER); +#endif +#if TIVA_HAS_GPIOS + nvicDisableVector(TIVA_GPIOS_NUMBER); +#endif +#if TIVA_HAS_GPIOT + nvicDisableVector(TIVA_GPIOT_NUMBER); +#endif +} +#endif /* PAL_USE_CALLBACKS || PAL_USE_WAIT */ + +#endif /* HAL_USE_PAL */ + +/** + * @} + */ diff --git a/os/hal/ports/TIVA/LLD/GPIO/hal_pal_lld.h b/os/hal/ports/TIVA/LLD/GPIO/hal_pal_lld.h new file mode 100644 index 0000000..e884a92 --- /dev/null +++ b/os/hal/ports/TIVA/LLD/GPIO/hal_pal_lld.h @@ -0,0 +1,1141 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file GPIO/hal_pal_lld.h + * @brief TM4C123x/TM4C129x PAL subsystem low level driver header. + * + * @addtogroup PAL + * @{ + */ + +#ifndef HAL_PAL_LLD_H +#define HAL_PAL_LLD_H + +#if HAL_USE_PAL || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Unsupported modes and specific modes */ +/*===========================================================================*/ + +#undef PAL_MODE_RESET +#undef PAL_MODE_UNCONNECTED +#undef PAL_MODE_INPUT +#undef PAL_MODE_INPUT_PULLUP +#undef PAL_MODE_INPUT_PULLDOWN +#undef PAL_MODE_INPUT_ANALOG +#undef PAL_MODE_OUTPUT_PUSHPULL +#undef PAL_MODE_OUTPUT_OPENDRAIN + +/** + * @name TIVA-specific I/O mode flags + * @{ + */ +#define PAL_TIVA_DIR_MASK (1 << 0) +#define PAL_TIVA_DIR_INPUT (0 << 0) +#define PAL_TIVA_DIR_OUTPUT (1 << 0) + +#define PAL_TIVA_AFSEL_MASK (1 << 1) +#define PAL_TIVA_AFSEL_GPIO (0 << 1) +#define PAL_TIVA_AFSEL_ALTERNATE (1 << 1) + +#define PAL_TIVA_DR2R_MASK (1 << 2) +#define PAL_TIVA_DR2R_DISABLE (0 << 2) +#define PAL_TIVA_DR2R_ENABLE (1 << 2) + +#define PAL_TIVA_DR4R_MASK (1 << 3) +#define PAL_TIVA_DR4R_DISABLE (0 << 3) +#define PAL_TIVA_DR4R_ENABLE (1 << 3) + +#define PAL_TIVA_DR8R_MASK (1 << 4) +#define PAL_TIVA_DR8R_DISABLE (0 << 4) +#define PAL_TIVA_DR8R_ENABLE (1 << 4) + +#define PAL_TIVA_ODR_MASK (1 << 5) +#define PAL_TIVA_ODR_PUSHPULL (0 << 5) +#define PAL_TIVA_ODR_OPENDRAIN (1 << 5) + +#define PAL_TIVA_PUR_MASK (1 << 6) +#define PAL_TIVA_PUR_DISABLE (0 << 6) +#define PAL_TIVA_PUR_ENABLE (1 << 6) + +#define PAL_TIVA_PDR_MASK (1 << 7) +#define PAL_TIVA_PDR_DISABLE (0 << 7) +#define PAL_TIVA_PDR_ENABLE (1 << 7) + +#define PAL_TIVA_SLR_MASK (1 << 8) +#define PAL_TIVA_SLR_DISABLE (0 << 8) +#define PAL_TIVA_SLR_ENABLE (1 << 8) + +#define PAL_TIVA_DEN_MASK (1 << 9) +#define PAL_TIVA_DEN_DISABLE (0 << 9) +#define PAL_TIVA_DEN_ENABLE (1 << 9) + +#define PAL_TIVA_AMSEL_MASK (1 << 10) +#define PAL_TIVA_AMSEL_DISABLE (0 << 10) +#define PAL_TIVA_AMSEL_ENABLE (1 << 10) + +#define PAL_TIVA_PCTL_MASK (7 << 11) +#define PAL_TIVA_PCTL(n) ((n) << 11) + +/** + * @brief Alternate function. + * + * @param[in] n alternate function selector + */ +#define PAL_MODE_ALTERNATE(n) (PAL_TIVA_AFSEL_ALTERNATE | \ + PAL_TIVA_PCTL(n)) +/** @} */ + +/** + * @name Standard I/O mode flags + * @{ + */ +/** + * @brief This mode is implemented as input. + */ +#define PAL_MODE_RESET PAL_MODE_INPUT + +/** + * @brief This mode is implemented as input with pull-up. + */ +#define PAL_MODE_UNCONNECTED PAL_MODE_INPUT_PULLUP + +/** + * @brief Regular input high-Z pad. + */ +#define PAL_MODE_INPUT (PAL_TIVA_DEN_ENABLE | \ + PAL_TIVA_DIR_INPUT) + +/** + * @brief Input pad with weak pull up resistor. + */ +#define PAL_MODE_INPUT_PULLUP (PAL_TIVA_DIR_INPUT | \ + PAL_TIVA_PUR_ENABLE | \ + PAL_TIVA_DEN_ENABLE) + +/** + * @brief Input pad with weak pull down resistor. + */ +#define PAL_MODE_INPUT_PULLDOWN (PAL_TIVA_DIR_INPUT | \ + PAL_TIVA_PDR_ENABLE | \ + PAL_TIVA_DEN_ENABLE) + +/** + * @brief Analog input mode. + */ +#define PAL_MODE_INPUT_ANALOG (PAL_TIVA_DEN_DISABLE | \ + PAL_TIVA_AMSEL_ENABLE) + +/** + * @brief Push-pull output pad. + */ +#define PAL_MODE_OUTPUT_PUSHPULL (PAL_TIVA_DIR_OUTPUT | \ + PAL_TIVA_DR2R_ENABLE | \ + PAL_TIVA_ODR_PUSHPULL | \ + PAL_TIVA_DEN_ENABLE) + +/** + * @brief Open-drain output pad. + */ +#define PAL_MODE_OUTPUT_OPENDRAIN (PAL_TIVA_DIR_OUTPUT | \ + PAL_TIVA_DR2R_ENABLE | \ + PAL_TIVA_ODR_OPENDRAIN | \ + PAL_TIVA_DEN_ENABLE) +/** @} */ + +/*===========================================================================*/ +/* I/O Ports Types and constants. */ +/*===========================================================================*/ + +/** + * @name Port related definitions + * @{ + */ +/** + * @brief Width, in bits, of an I/O port. + */ +#define PAL_IOPORTS_WIDTH 8 + +/** + * @brief Whole port mask. + * @brief This macro specifies all the valid bits into a port. + */ +#define PAL_WHOLE_PORT ((ioportmask_t)0xFF) +/** @} */ + +/** + * @name Line handling macros + * @{ + */ +/** + * @brief Forms a line identifier. + * @details A port/pad pair are encoded into an @p ioline_t type. The encoding + * of this type is platform-dependent. + * @note In this driver the pad number is encoded in the lower 4 bits of + * the GPIO address which are guaranteed to be zero. + */ +#define PAL_LINE(port, pad) \ + ((ioline_t)((uint32_t)(port)) | ((uint32_t)(pad))) + +/** + * @brief Decodes a port identifier from a line identifier. + */ +#define PAL_PORT(line) \ + ((ioportid_t)(((uint32_t)(line)) & 0xFFFFFFF0U)) + +/** + * @brief Decodes a pad identifier from a line identifier. + */ +#define PAL_PAD(line) \ + ((uint32_t)((uint32_t)(line) & 0x0000000FU)) + +/** + * @brief Value identifying an invalid line. + */ +#define PAL_NOLINE 0U +/** @} */ + +/** + * @brief GPIO port setup info. + */ +typedef struct +{ + /** @brief Initial value for DATA register.*/ + uint32_t data; + /** @brief Initial value for DIR register.*/ + uint32_t dir; + /** @brief Initial value for AFSEL register.*/ + uint32_t afsel; + /** @brief Initial value for DR2R register.*/ + uint32_t dr2r; + /** @brief Initial value for DR4R register.*/ + uint32_t dr4r; + /** @brief Initial value for DR8R register.*/ + uint32_t dr8r; + /** @brief Initial value for ODR register.*/ + uint32_t odr; + /** @brief Initial value for PUR register.*/ + uint32_t pur; + /** @brief Initial value for PDR register.*/ + uint32_t pdr; + /** @brief Initial value for SLR register.*/ + uint32_t slr; + /** @brief Initial value for DEN register.*/ + uint32_t den; + /** @brief Initial value for AMSEL register.*/ + uint32_t amsel; + /** @brief Initial value for PCTL register.*/ + uint32_t pctl; +} tiva_gpio_setup_t; + +/** + * @brief Tiva GPIO static initializer. + * @details An instance of this structure must be passed to @p palInit() at + * system startup time in order to initialized the digital I/O + * subsystem. This represents only the initial setup, specific pads + * or whole ports can be reprogrammed at later time. + */ +typedef struct +{ + /** @brief GPIO port A setup data.*/ + tiva_gpio_setup_t PAData; + /** @brief GPIO port B setup data.*/ + tiva_gpio_setup_t PBData; + /** @brief GPIO port C setup data.*/ + tiva_gpio_setup_t PCData; + /** @brief GPIO port D setup data.*/ + tiva_gpio_setup_t PDData; + /** @brief GPIO port E setup data.*/ + tiva_gpio_setup_t PEData; + /** @brief GPIO port F setup data.*/ + tiva_gpio_setup_t PFData; +#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) + /** @brief GPIO port G setup data.*/ + tiva_gpio_setup_t PGData; +#endif +#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) + /** @brief GPIO port H setup data.*/ + tiva_gpio_setup_t PHData; +#endif +#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) + /** @brief GPIO port J setup data.*/ + tiva_gpio_setup_t PJData; +#endif +#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) + /** @brief GPIO port K setup data.*/ + tiva_gpio_setup_t PKData; +#endif +#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) + /** @brief GPIO port L setup data.*/ + tiva_gpio_setup_t PLData; +#endif +#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) + /** @brief GPIO port M setup data.*/ + tiva_gpio_setup_t PMData; +#endif +#if TIVA_HAS_GPION || defined(__DOXYGEN__) + /** @brief GPIO port N setup data.*/ + tiva_gpio_setup_t PNData; +#endif +#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) + /** @brief GPIO port P setup data.*/ + tiva_gpio_setup_t PPData; +#endif +#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) + /** @brief GPIO port Q setup data.*/ + tiva_gpio_setup_t PQData; +#endif +#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) + /** @brief GPIO port R setup data.*/ + tiva_gpio_setup_t PRData; +#endif +#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) + /** @brief GPIO port S setup data.*/ + tiva_gpio_setup_t PSData; +#endif +#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) + /** @brief GPIO port T setup data.*/ + tiva_gpio_setup_t PTData; +#endif +} PALConfig; + +/** + * @brief Digital I/O port sized unsigned type. + */ +typedef uint32_t ioportmask_t; + +/** + * @brief Digital I/O modes. + */ +typedef uint32_t iomode_t; + +/** + * @brief Type of an I/O line. + */ +typedef uint32_t ioline_t; + +/** + * @brief Type of an event mode. + */ +typedef uint32_t ioeventmode_t; + +/** + * @brief Port Identifier. + */ +typedef uint32_t ioportid_t; + +/** + * @brief Type of an pad identifier. + */ +typedef uint32_t iopadid_t; + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @name Configuration options + * @{ + */ +/** + * @brief GPIOA interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOA_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOB interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOB_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOC interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOC_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOD interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOD_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOE interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOE_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOF interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOF_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOG interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOG_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOG_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOH interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOH_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOH_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOJ interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOJ_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOJ_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOK interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOK_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOK_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOL interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOL_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOL_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOM interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOM_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOM_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPION interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPION_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPION_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOP0 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOP0_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOP0_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOP1 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOP1_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOP1_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOP2 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOP2_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOP2_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOP3 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOP3_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOP3_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOP4 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOP4_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOP4_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOP5 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOP5_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOP5_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOP6 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOP6_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOP6_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOP7 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOP7_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOP7_IRQ_PRIORITY 3 +#endif +/** @} */ + +/** + * @brief GPIOQ0 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOQ0_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOQ0_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOQ1 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOQ1_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOQ1_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOQ2 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOQ2_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOQ2_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOQ3 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOQ3_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOQ3_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOQ4 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOQ4_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOQ4_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOQ5 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOQ5_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOQ5_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOQ6 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOQ6_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOQ6_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOQ7 interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOQ7_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOQ7_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOR interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOR_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOR_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOS interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOS_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOS_IRQ_PRIORITY 3 +#endif + +/** + * @brief GPIOT interrupt priority level setting. + */ +#if !defined(TIVA_PAL_GPIOT_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_PAL_GPIOT_IRQ_PRIORITY 3 +#endif +/** @} */ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +#define GPIOA GPIO_PORTA_AHB_BASE +#define GPIOB GPIO_PORTB_AHB_BASE +#define GPIOC GPIO_PORTC_AHB_BASE +#define GPIOD GPIO_PORTD_AHB_BASE +#define GPIOE GPIO_PORTE_AHB_BASE +#define GPIOF GPIO_PORTF_AHB_BASE +#define GPIOG GPIO_PORTG_AHB_BASE +#define GPIOH GPIO_PORTH_AHB_BASE +#define GPIOJ GPIO_PORTJ_AHB_BASE +#define GPIOK GPIO_PORTK_BASE +#define GPIOL GPIO_PORTL_BASE +#define GPIOM GPIO_PORTM_BASE +#define GPION GPIO_PORTN_BASE +#define GPIOP GPIO_PORTP_BASE +#define GPIOQ GPIO_PORTQ_BASE +#define GPIOR GPIO_PORTR_BASE +#define GPIOS GPIO_PORTS_BASE +#define GPIOT GPIO_PORTT_BASE + +#if TIVA_HAS_GPIOA && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOA_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOA" +#endif + +#if TIVA_HAS_GPIOB && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOB_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOB" +#endif + +#if TIVA_HAS_GPIOC && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOC_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOC" +#endif + +#if TIVA_HAS_GPIOD && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOD_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOD" +#endif + +#if TIVA_HAS_GPIOE && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOE_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOE" +#endif + +#if TIVA_HAS_GPIOF && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOF_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOF" +#endif + +#if TIVA_HAS_GPIOG && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOG_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOG" +#endif + +#if TIVA_HAS_GPIOH && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOH_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOH" +#endif + +#if TIVA_HAS_GPIOJ && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOJ_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOJ" +#endif + +#if TIVA_HAS_GPIOK && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOK_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOK" +#endif + +#if TIVA_HAS_GPIOL && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOL_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOL" +#endif + +#if TIVA_HAS_GPIOM && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOM_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOM" +#endif + +#if TIVA_HAS_GPION && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPION_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPION" +#endif + +#if TIVA_HAS_GPIOP && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOP0_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOP0" +#endif + +#if TIVA_HAS_GPIOP && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOP1_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOP1" +#endif + +#if TIVA_HAS_GPIOP && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOP2_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOP2" +#endif + +#if TIVA_HAS_GPIOP && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOP3_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOP3" +#endif + +#if TIVA_HAS_GPIOP && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOP4_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOP4" +#endif + +#if TIVA_HAS_GPIOP && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOP5_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOP5" +#endif + +#if TIVA_HAS_GPIOP && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOP6_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOP6" +#endif + +#if TIVA_HAS_GPIOP && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOP7_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOP7" +#endif + +#if TIVA_HAS_GPIOQ && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOQ0_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOQ0" +#endif + +#if TIVA_HAS_GPIOQ && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOQ1_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOQ1" +#endif + +#if TIVA_HAS_GPIOQ && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOQ2_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOQ2" +#endif + +#if TIVA_HAS_GPIOQ && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOQ3_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOQ3" +#endif + +#if TIVA_HAS_GPIOQ && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOQ4_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOQ4" +#endif + +#if TIVA_HAS_GPIOQ && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOQ5_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOQ5" +#endif + +#if TIVA_HAS_GPIOQ && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOQ6_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOQ6" +#endif + +#if TIVA_HAS_GPIOQ && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOQ7_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOQ7" +#endif + +#if TIVA_HAS_GPIOR && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOR_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOR" +#endif + +#if TIVA_HAS_GPIOS && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOS_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOS" +#endif + +#if TIVA_HAS_GPIOT && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_PAL_GPIOT_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to GPIOT" +#endif + +/*===========================================================================*/ +/* I/O Ports Identifiers. */ +/*===========================================================================*/ + +/** + * @brief GPIO port A identifier. + */ +#define IOPORT1 GPIOA + +/** + * @brief GPIO port B identifier. + */ +#define IOPORT2 GPIOB + +/** + * @brief GPIO port C identifier. + */ +#define IOPORT3 GPIOC + +/** + * @brief GPIO port D identifier. + */ +#define IOPORT4 GPIOD + +/** + * @brief GPIO port E identifier. + */ +#define IOPORT5 GPIOE + +/** + * @brief GPIO port F identifier. + */ +#define IOPORT6 GPIOF + +/** + * @brief GPIO port G identifier. + */ +#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) +#define IOPORT7 GPIOG +#endif + +/** + * @brief GPIO port H identifier. + */ +#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) +#define IOPORT8 GPIOH +#endif + +/** + * @brief GPIO port J identifier. + */ +#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) +#define IOPORT9 GPIOJ +#endif + +/** + * @brief GPIO port K identifier. + */ +#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) +#define IOPORT10 GPIOK +#endif + +/** + * @brief GPIO port L identifier. + */ +#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) +#define IOPORT11 GPIOL +#endif + +/** + * @brief GPIO port M identifier. + */ +#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) +#define IOPORT12 GPIOM +#endif + +/** + * @brief GPIO port N identifier. + */ +#if TIVA_HAS_GPION || defined(__DOXYGEN__) +#define IOPORT13 GPION +#endif + +/** + * @brief GPIO port P identifier. + */ +#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) +#define IOPORT14 GPIOP +#endif + +/** + * @brief GPIO port Q identifier. + */ +#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) +#define IOPORT15 GPIOQ +#endif + +/** + * @brief GPIO port R identifier. + */ +#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) +#define IOPORT16 GPIOR +#endif + +/** + * @brief GPIO port S identifier. + */ +#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) +#define IOPORT17 GPIOS +#endif + +/** + * @brief GPIO port T identifier. + */ +#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) +#define IOPORT18 GPIOT +#endif + +/*===========================================================================*/ +/* Implementation, some of the following macros could be implemented as */ +/* functions, if so please put them in pal_lld.c. */ +/*===========================================================================*/ + +/** + * @brief Low level PAL subsystem initialization. + * + * @param[in] config architecture-dependent ports configuration + * + * @notapi + */ +#define pal_lld_init(config) _pal_lld_init(config) + +/** + * @brief Reads the physical I/O port states. + * + * @param[in] port port identifier + * @return The port bits. + * + * @notapi + */ +#define pal_lld_readport(port) (HWREG((port) + GPIO_O_DATA + (0xff << 2))) + +/** + * @brief Reads the output latch. + * @details The purpose of this function is to read back the latched output + * value. + * + * @param[in] port port identifier + * @return The latched logical states. + * + * @notapi + */ +#define pal_lld_readlatch(port) pal_lld_readport(port) + +/** + * @brief Writes a bits mask on a I/O port. + * + * @param[in] port port identifier + * @param[in] bits bits to be written on the specified port + * + * @notapi + */ +#define pal_lld_writeport(port, bits) (HWREG((port) + GPIO_O_DATA + (0xff << 2)) = (bits)) + +/** + * @brief Sets a bits mask on a I/O port. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] bits bits to be ORed on the specified port + * + * @notapi + */ +#define pal_lld_setport(port, bits) (HWREG((port) + (GPIO_O_DATA + (bits << 2))) = 0xFF) + +/** + * @brief Clears a bits mask on a I/O port. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] bits bits to be cleared on the specified port + * + * @notapi + */ +#define pal_lld_clearport(port, bits) (HWREG((port) + (GPIO_O_DATA + (bits << 2))) = 0) + +/** + * @brief Reads a group of bits. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] mask group mask + * @param[in] offset group bit offset within the port + * @return The group logical states. + * + * @notapi + */ +#define pal_lld_readgroup(port, mask, offset) \ + (HWREG((port) + (GPIO_O_DATA + (((mask) << (offset)) << 2)))) + +/** + * @brief Writes a group of bits. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] mask group mask + * @param[in] offset group bit offset within the port + * @param[in] bits bits to be written. Values exceeding the group width + * are masked. + * + * @notapi + */ +#define pal_lld_writegroup(port, mask, offset, bits) \ + (HWREG((port) + (GPIO_O_DATA + (((mask) << (offset)) << 2))) = (bits)) + +/** + * @brief Pads group mode setup. + * @details This function programs a pads group belonging to the same port + * with the specified mode. + * @note Programming an unknown or unsupported mode is silently ignored. + * + * @param[in] port port identifier + * @param[in] mask group mask + * @param[in] offset group bit offset within the port + * @param[in] mode group mode + * + * @notapi + */ +#define pal_lld_setgroupmode(port, mask, offset, mode) \ + _pal_lld_setgroupmode(port, mask << offset, mode) + +/** + * @brief Reads a logical state from an I/O pad. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * @return The logical state. + * @retval PAL_LOW low logical state. + * @retval PAL_HIGH high logical state. + * + * @notapi + */ +#define pal_lld_readpad(port, pad) (HWREG((port) + (GPIO_O_DATA + ((1 << (pad)) << 2)))) + +/** + * @brief Writes a logical state on an output pad. + * @note This function is not meant to be invoked directly by the + * application code. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * @param[in] bit logical value, the value must be @p PAL_LOW or + * @p PAL_HIGH + * + * @notapi + */ +#define pal_lld_writepad(port, pad, bit) \ + (HWREG((port) + (GPIO_O_DATA + ((1 << (pad)) << 2))) = 1 << (bit)) + +/** + * @brief Sets a pad logical state to @p PAL_HIGH. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * + * @notapi + */ +#define pal_lld_setpad(port, pad) \ + (HWREG((port) + (GPIO_O_DATA + ((1 << (pad)) << 2))) = 1 << (pad)) + +/** + * @brief Clears a pad logical state to @p PAL_LOW. + * @note The @ref PAL provides a default software implementation of this + * functionality, implement this function if can optimize it by using + * special hardware functionalities or special coding. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * + * @notapi + */ +#define pal_lld_clearpad(port, pad) \ + (HWREG((port) + (GPIO_O_DATA + ((1 << (pad)) << 2))) = 0) + +/** + * @brief Pad event enable. + * @note Programming an unknown or unsupported mode is silently ignored. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * @param[in] mode pad event mode + * + * @notapi + */ +#define pal_lld_enablepadevent(port, pad, mode) \ + _pal_lld_enablepadevent(port, pad, mode) + +/** + * @brief Pad event disable. + * @details This function disables previously programmed event callbacks. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * + * @notapi + */ +#define pal_lld_disablepadevent(port, pad) \ + _pal_lld_disablepadevent(port, pad) + +/** + * @brief Returns a PAL event structure associated to a pad. + * + * @param[in] port port identifier + * @param[in] pad pad number within the port + * + * @notapi + */ +#define pal_lld_get_pad_event(port, pad) \ + &_pal_events[((((((uint32_t)port - (uint32_t)GPIOA) >> 12) & 0x1FU) * 8) + pad)]; + +/** + * @brief Returns a PAL event structure associated to a line. + * + * @param[in] line line identifier + * + * @notapi + */ +#define pal_lld_get_line_event(line) \ + &_pal_events[((((((uint32_t)PAL_PORT(line) - (uint32_t)GPIOA) >> 12) & 0x1FU) * 8) + PAL_PAD(line))] + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#if !defined(__DOXYGEN__) +extern const PALConfig pal_default_config; +extern palevent_t _pal_events[TIVA_GPIO_PINS]; +#endif + +#ifdef __cplusplus +extern "C" { +#endif + void _pal_lld_init(const PALConfig *config); + void _pal_lld_setgroupmode(ioportid_t port, + ioportmask_t mask, + iomode_t mode); +#if PAL_USE_CALLBACKS || PAL_USE_WAIT + void _pal_lld_enablepadevent(ioportid_t port, + iopadid_t pad, + ioeventmode_t mode); + void _pal_lld_disablepadevent(ioportid_t port, iopadid_t pad); + void pal_lld_disable_irqs(void); +#endif +#ifdef __cplusplus +} +#endif + +#endif /* HAL_USE_PAL */ + +#endif /* HAL_PAL_LLD_H */ + +/** @} */ diff --git a/os/hal/ports/TIVA/LLD/GPTM/driver.mk b/os/hal/ports/TIVA/LLD/GPTM/driver.mk new file mode 100644 index 0000000..f003ce4 --- /dev/null +++ b/os/hal/ports/TIVA/LLD/GPTM/driver.mk @@ -0,0 +1,11 @@ +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPTM/hal_st_lld.c + +ifeq ($(USE_SMART_BUILD),yes) +ifneq ($(findstring HAL_USE_GPT TRUE,$(HALCONF)),) +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPTM/hal_gpt_lld.c +endif +else +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPTM/hal_gpt_lld.c +endif + +PLATFORMINC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPTM diff --git a/os/hal/ports/TIVA/LLD/hal_gpt_lld.c b/os/hal/ports/TIVA/LLD/GPTM/hal_gpt_lld.c index 86f2303..8fb02f5 100644 --- a/os/hal/ports/TIVA/LLD/hal_gpt_lld.c +++ b/os/hal/ports/TIVA/LLD/GPTM/hal_gpt_lld.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file TIVA/gpt_lld.c + * @file GPTM/hal_gpt_lld.c * @brief TM4C123x/TM4C129x GPT subsystem low level driver source. * * @addtogroup GPT @@ -133,7 +133,7 @@ GPTDriver GPTD12; */ static void gpt_lld_serve_interrupt(GPTDriver *gptp) { - gptp->gpt->ICR = 0xffffffff; + HWREG(gptp->gpt + TIMER_O_ICR) = 0xffffffff; if (gptp->state == GPT_ONESHOT) { gptp->state = GPT_READY; @@ -388,62 +388,62 @@ void gpt_lld_init(void) { /* Driver initialization.*/ #if TIVA_GPT_USE_GPT0 - GPTD1.gpt = GPT0; + GPTD1.gpt = TIMER0_BASE; gptObjectInit(&GPTD1); #endif #if TIVA_GPT_USE_GPT1 - GPTD2.gpt = GPT1; + GPTD2.gpt = TIMER1_BASE; gptObjectInit(&GPTD2); #endif #if TIVA_GPT_USE_GPT2 - GPTD3.gpt = GPT2; + GPTD3.gpt = TIMER2_BASE; gptObjectInit(&GPTD3); #endif #if TIVA_GPT_USE_GPT3 - GPTD4.gpt = GPT3; + GPTD4.gpt = TIMER3_BASE; gptObjectInit(&GPTD4); #endif #if TIVA_GPT_USE_GPT4 - GPTD5.gpt = GPT4; + GPTD5.gpt = TIMER4_BASE; gptObjectInit(&GPTD5); #endif #if TIVA_GPT_USE_GPT5 - GPTD6.gpt = GPT5; + GPTD6.gpt = TIMER5_BASE; gptObjectInit(&GPTD6); #endif #if TIVA_GPT_USE_WGPT0 - GPTD7.gpt = WGPT0; + GPTD7.gpt = WTIMER0_BASE; gptObjectInit(&GPTD7); #endif #if TIVA_GPT_USE_WGPT1 - GPTD8.gpt = WGPT1; + GPTD8.gpt = WTIMER1_BASE; gptObjectInit(&GPTD8); #endif #if TIVA_GPT_USE_WGPT2 - GPTD9.gpt = WGPT2; + GPTD9.gpt = WTIMER2_BASE; gptObjectInit(&GPTD9); #endif #if TIVA_GPT_USE_WGPT3 - GPTD10.gpt = WGPT3; + GPTD10.gpt = WTIMER3_BASE; gptObjectInit(&GPTD10); #endif #if TIVA_GPT_USE_WGPT4 - GPTD11.gpt = WGPT4; + GPTD11.gpt = WTIMER4_BASE; gptObjectInit(&GPTD11); #endif #if TIVA_GPT_USE_WGPT5 - GPTD12.gpt = WGPT5; + GPTD12.gpt = WTIMER5_BASE; gptObjectInit(&GPTD12); #endif } @@ -461,93 +461,141 @@ void gpt_lld_start(GPTDriver *gptp) /* Clock activation.*/ #if TIVA_GPT_USE_GPT0 if (&GPTD1 == gptp) { - SYSCTL->RCGCTIMER |= (1 << 0); + HWREG(SYSCTL_RCGCTIMER) |= (1 << 0); + + while (!(HWREG(SYSCTL_PRTIMER) & (1 << 0))) + ; + nvicEnableVector(TIVA_GPT0A_NUMBER, TIVA_GPT_GPT0A_IRQ_PRIORITY); } #endif #if TIVA_GPT_USE_GPT1 if (&GPTD2 == gptp) { - SYSCTL->RCGCTIMER |= (1 << 1); + HWREG(SYSCTL_RCGCTIMER) |= (1 << 1); + + while (!(HWREG(SYSCTL_PRTIMER) & (1 << 1))) + ; + nvicEnableVector(TIVA_GPT1A_NUMBER, TIVA_GPT_GPT1A_IRQ_PRIORITY); } #endif #if TIVA_GPT_USE_GPT2 if (&GPTD3 == gptp) { - SYSCTL->RCGCTIMER |= (1 << 2); + HWREG(SYSCTL_RCGCTIMER) |= (1 << 2); + + while (!(HWREG(SYSCTL_PRTIMER) & (1 << 2))) + ; + nvicEnableVector(TIVA_GPT2A_NUMBER, TIVA_GPT_GPT2A_IRQ_PRIORITY); } #endif #if TIVA_GPT_USE_GPT3 if (&GPTD4 == gptp) { - SYSCTL->RCGCTIMER |= (1 << 3); + HWREG(SYSCTL_RCGCTIMER) |= (1 << 3); + + while (!(HWREG(SYSCTL_PRTIMER) & (1 << 3))) + ; + nvicEnableVector(TIVA_GPT3A_NUMBER, TIVA_GPT_GPT3A_IRQ_PRIORITY); } #endif #if TIVA_GPT_USE_GPT4 if (&GPTD5 == gptp) { - SYSCTL->RCGCTIMER |= (1 << 4); + HWREG(SYSCTL_RCGCTIMER) |= (1 << 4); + + while (!(HWREG(SYSCTL_PRTIMER) & (1 << 4))) + ; + nvicEnableVector(TIVA_GPT4A_NUMBER, TIVA_GPT_GPT4A_IRQ_PRIORITY); } #endif #if TIVA_GPT_USE_GPT5 if (&GPTD6 == gptp) { - SYSCTL->RCGCTIMER |= (1 << 5); + HWREG(SYSCTL_RCGCTIMER) |= (1 << 5); + + while (!(HWREG(SYSCTL_PRTIMER) & (1 << 5))) + ; + nvicEnableVector(TIVA_GPT5A_NUMBER, TIVA_GPT_GPT5A_IRQ_PRIORITY); } #endif #if TIVA_GPT_USE_WGPT0 if (&GPTD7 == gptp) { - SYSCTL->RCGCWTIMER |= (1 << 0); + HWREG(SYSCTL_RCGCWTIMER) |= (1 << 0); + + while (!(HWREG(SYSCTL_PRWTIMER) & (1 << 0))) + ; + nvicEnableVector(TIVA_WGPT0A_NUMBER, TIVA_GPT_WGPT0A_IRQ_PRIORITY); } #endif #if TIVA_GPT_USE_WGPT1 if (&GPTD8 == gptp) { - SYSCTL->RCGCWTIMER |= (1 << 1); + HWREG(SYSCTL_RCGCWTIMER) |= (1 << 1); + + while (!(HWREG(SYSCTL_PRWTIMER) & (1 << 1))) + ; + nvicEnableVector(TIVA_WGPT1A_NUMBER, TIVA_GPT_WGPT1A_IRQ_PRIORITY); } #endif #if TIVA_GPT_USE_WGPT2 if (&GPTD9 == gptp) { - SYSCTL->RCGCWTIMER |= (1 << 2); + HWREG(SYSCTL_RCGCWTIMER) |= (1 << 2); + + while (!(HWREG(SYSCTL_PRWTIMER) & (1 << 2))) + ; + nvicEnableVector(TIVA_WGPT2A_NUMBER, TIVA_GPT_WGPT2A_IRQ_PRIORITY); } #endif #if TIVA_GPT_USE_WGPT3 if (&GPTD10 == gptp) { - SYSCTL->RCGCWTIMER |= (1 << 3); + HWREG(SYSCTL_RCGCWTIMER) |= (1 << 3); + + while (!(HWREG(SYSCTL_PRWTIMER) & (1 << 3))) + ; + nvicEnableVector(TIVA_WGPT3A_NUMBER, TIVA_GPT_WGPT3A_IRQ_PRIORITY); } #endif #if TIVA_GPT_USE_WGPT4 if (&GPTD11 == gptp) { - SYSCTL->RCGCWTIMER |= (1 << 4); + HWREG(SYSCTL_RCGCWTIMER) |= (1 << 4); + + while (!(HWREG(SYSCTL_PRWTIMER) & (1 << 4))) + ; + nvicEnableVector(TIVA_WGPT4A_NUMBER, TIVA_GPT_WGPT4A_IRQ_PRIORITY); } #endif #if TIVA_GPT_USE_WGPT5 if (&GPTD12 == gptp) { - SYSCTL->RCGCWTIMER |= (1 << 5); + HWREG(SYSCTL_RCGCWTIMER) |= (1 << 5); + + while (!(HWREG(SYSCTL_PRWTIMER) & (1 << 5))) + ; + nvicEnableVector(TIVA_WGPT5A_NUMBER, TIVA_GPT_WGPT5A_IRQ_PRIORITY); } #endif } /* Timer configuration.*/ - gptp->gpt->CTL = 0; - gptp->gpt->CFG = GPTM_CFG_CFG_SPLIT; - gptp->gpt->TAPR = ((TIVA_SYSCLK / gptp->config->frequency) - 1); + HWREG(gptp->gpt + TIMER_O_CTL) = 0; + HWREG(gptp->gpt + TIMER_O_CFG) = TIMER_CFG_16_BIT; + HWREG(gptp->gpt + TIMER_O_TAPR) = ((TIVA_SYSCLK / gptp->config->frequency) - 1); } /** @@ -560,91 +608,91 @@ void gpt_lld_start(GPTDriver *gptp) void gpt_lld_stop(GPTDriver *gptp) { if (gptp->state == GPT_READY) { - gptp->gpt->IMR = 0; - gptp->gpt->TAILR = 0; - gptp->gpt->CTL = 0; + HWREG(gptp->gpt + TIMER_O_IMR) = 0; + HWREG(gptp->gpt + TIMER_O_TAILR) = 0; + HWREG(gptp->gpt + TIMER_O_CTL) = 0; #if TIVA_GPT_USE_GPT0 if (&GPTD1 == gptp) { nvicDisableVector(TIVA_GPT0A_NUMBER); - SYSCTL->RCGCTIMER &= ~(1 << 0); + HWREG(SYSCTL_RCGCTIMER) &= ~(1 << 0); } #endif #if TIVA_GPT_USE_GPT1 if (&GPTD2 == gptp) { nvicDisableVector(TIVA_GPT1A_NUMBER); - SYSCTL->RCGCTIMER &= ~(1 << 1); + HWREG(SYSCTL_RCGCTIMER) &= ~(1 << 1); } #endif #if TIVA_GPT_USE_GPT2 if (&GPTD3 == gptp) { nvicDisableVector(TIVA_GPT2A_NUMBER); - SYSCTL->RCGCTIMER &= ~(1 << 2); + HWREG(SYSCTL_RCGCTIMER) &= ~(1 << 2); } #endif #if TIVA_GPT_USE_GPT3 if (&GPTD4 == gptp) { nvicDisableVector(TIVA_GPT3A_NUMBER); - SYSCTL->RCGCTIMER &= ~(1 << 3); + HWREG(SYSCTL_RCGCTIMER) &= ~(1 << 3); } #endif #if TIVA_GPT_USE_GPT4 if (&GPTD5 == gptp) { nvicDisableVector(TIVA_GPT4A_NUMBER); - SYSCTL->RCGCTIMER &= ~(1 << 4); + HWREG(SYSCTL_RCGCTIMER) &= ~(1 << 4); } #endif #if TIVA_GPT_USE_GPT5 if (&GPTD6 == gptp) { nvicDisableVector(TIVA_GPT5A_NUMBER); - SYSCTL->RCGCTIMER &= ~(1 << 5); + HWREG(SYSCTL_RCGCTIMER) &= ~(1 << 5); } #endif #if TIVA_GPT_USE_WGPT0 if (&GPTD7 == gptp) { nvicDisableVector(TIVA_WGPT0A_NUMBER); - SYSCTL->RCGCWTIMER &= ~(1 << 0); + HWREG(SYSCTL_RCGCWTIMER) &= ~(1 << 0); } #endif #if TIVA_GPT_USE_WGPT1 if (&GPTD8 == gptp) { nvicDisableVector(TIVA_WGPT1A_NUMBER); - SYSCTL->RCGCWTIMER &= ~(1 << 1); + HWREG(SYSCTL_RCGCWTIMER) &= ~(1 << 1); } #endif #if TIVA_GPT_USE_WGPT2 if (&GPTD9 == gptp) { nvicDisableVector(TIVA_WGPT2A_NUMBER); - SYSCTL->RCGCWTIMER &= ~(1 << 2); + HWREG(SYSCTL_RCGCWTIMER) &= ~(1 << 2); } #endif #if TIVA_GPT_USE_WGPT3 if (&GPTD10 == gptp) { nvicDisableVector(TIVA_WGPT3A_NUMBER); - SYSCTL->RCGCWTIMER &= ~(1 << 3); + HWREG(SYSCTL_RCGCWTIMER) &= ~(1 << 3); } #endif #if TIVA_GPT_USE_WGPT4 if (&GPTD11 == gptp) { nvicDisableVector(TIVA_WGPT4A_NUMBER); - SYSCTL->RCGCWTIMER &= ~(1 << 4); + HWREG(SYSCTL_RCGCWTIMER) &= ~(1 << 4); } #endif #if TIVA_GPT_USE_WGPT5 if (&GPTD12 == gptp) { nvicDisableVector(TIVA_WGPT5A_NUMBER); - SYSCTL->RCGCWTIMER &= ~(1 << 5); + HWREG(SYSCTL_RCGCWTIMER) &= ~(1 << 5); } #endif } @@ -660,11 +708,11 @@ void gpt_lld_stop(GPTDriver *gptp) */ void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t interval) { - gptp->gpt->TAILR = interval - 1; - gptp->gpt->ICR = 0xfffffff; - gptp->gpt->IMR = GPTM_IMR_TATOIM; - gptp->gpt->TAMR = GPTM_TAMR_TAMR_PERIODIC | GPTM_TAMR_TAILD | GPTM_TAMR_TASNAPS; - gptp->gpt->CTL = GPTM_CTL_TAEN | GPTM_CTL_TASTALL; + HWREG(gptp->gpt + TIMER_O_TAILR) = interval - 1; + HWREG(gptp->gpt + TIMER_O_ICR) = 0xfffffff; + HWREG(gptp->gpt + TIMER_O_IMR) = TIMER_IMR_TATOIM; + HWREG(gptp->gpt + TIMER_O_TAMR) = TIMER_TAMR_TAMR_PERIOD | TIMER_TAMR_TAILD | TIMER_TAMR_TASNAPS; + HWREG(gptp->gpt + TIMER_O_CTL) = TIMER_CTL_TAEN | TIMER_CTL_TASTALL; } /** @@ -676,9 +724,9 @@ void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t interval) */ void gpt_lld_stop_timer(GPTDriver *gptp) { - gptp->gpt->IMR = 0; - gptp->gpt->TAILR = 0; - gptp->gpt->CTL &= ~GPTM_CTL_TAEN; + HWREG(gptp->gpt + TIMER_O_IMR) = 0; + HWREG(gptp->gpt + TIMER_O_TAILR) = 0; + HWREG(gptp->gpt + TIMER_O_CTL) &= ~TIMER_CTL_TAEN; } /** @@ -694,13 +742,13 @@ void gpt_lld_stop_timer(GPTDriver *gptp) */ void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval) { - gptp->gpt->TAMR = GPTM_TAMR_TAMR_ONESHOT | GPTM_TAMR_TAILD | GPTM_TAMR_TASNAPS; - gptp->gpt->TAILR = interval - 1; - gptp->gpt->ICR = 0xffffffff; - gptp->gpt->CTL = GPTM_CTL_TAEN | GPTM_CTL_TASTALL; - while (!(gptp->gpt->RIS & GPTM_IMR_TATOIM)) + HWREG(gptp->gpt + TIMER_O_TAMR) = TIMER_TAMR_TAMR_1_SHOT | TIMER_TAMR_TAILD | TIMER_TAMR_TASNAPS; + HWREG(gptp->gpt + TIMER_O_TAILR) = interval - 1; + HWREG(gptp->gpt + TIMER_O_ICR) = 0xffffffff; + HWREG(gptp->gpt + TIMER_O_CTL) = TIMER_CTL_TAEN | TIMER_CTL_TASTALL; + while (!(HWREG(gptp->gpt + TIMER_O_RIS) & TIMER_IMR_TATOIM)) ; - gptp->gpt->ICR = 0xffffffff; + HWREG(gptp->gpt + TIMER_O_ICR) = 0xffffffff; } #endif /* HAL_USE_GPT */ diff --git a/os/hal/ports/TIVA/LLD/hal_gpt_lld.h b/os/hal/ports/TIVA/LLD/GPTM/hal_gpt_lld.h index e518e58..6b4196f 100644 --- a/os/hal/ports/TIVA/LLD/hal_gpt_lld.h +++ b/os/hal/ports/TIVA/LLD/GPTM/hal_gpt_lld.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file TIVA/gpt_lld.h + * @file GPTM/hal_gpt_lld.h * @brief TM4C123x/TM4C129x GPT subsystem low level driver header. * * @addtogroup GPT @@ -405,7 +405,7 @@ struct GPTDriver { /** * @brief Pointer to the GPT registers block. */ - GPT_TypeDef *gpt; + uint32_t gpt; }; /*===========================================================================*/ @@ -426,7 +426,7 @@ struct GPTDriver { * @notapi */ #define gpt_lld_change_interval(gptp, interval) { \ - gptp->gpt->TAILR = interval - 1; \ + HWREG(gptp->gpt + TIMER_O_TAILR) = interval - 1; \ } /*===========================================================================*/ diff --git a/os/hal/ports/TIVA/LLD/hal_st_lld.c b/os/hal/ports/TIVA/LLD/GPTM/hal_st_lld.c index 30fdb8a..0f9576a 100644 --- a/os/hal/ports/TIVA/LLD/hal_st_lld.c +++ b/os/hal/ports/TIVA/LLD/GPTM/hal_st_lld.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file Tiva/LLD/st_lld.c + * @file GPTM/hal_st_lld.c * @brief ST Driver subsystem low level driver code. * * @addtogroup ST @@ -37,44 +37,44 @@ #if TIVA_ST_TIMER_NUMBER == 0 #define ST_HANDLER TIVA_WGPT0A_HANDLER #define ST_NUMBER TIVA_WGPT0A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCWTIMER |= (1 << 0)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRWTIMER & (1 << 0))) +#define ST_ENABLE_CLOCK() (HWREG(SYSCTL_RCGCWTIMER) |= (1 << 0)) +#define ST_WAIT_CLOCK() while (!(HWREG(SYSCTL_PRWTIMER) & (1 << 0))) #elif TIVA_ST_TIMER_NUMBER == 1 #define ST_HANDLER TIVA_WGPT1A_HANDLER #define ST_NUMBER TIVA_WGPT1A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCWTIMER |= (1 << 1)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRWTIMER & (1 << 1))) +#define ST_ENABLE_CLOCK() (HWREG(SYSCTL_RCGCWTIMER) |= (1 << 1)) +#define ST_WAIT_CLOCK() while (!(HWREG(SYSCTL_PRWTIMER) & (1 << 1))) #elif TIVA_ST_TIMER_NUMBER == 2 #define ST_HANDLER TIVA_WGPT2A_HANDLER #define ST_NUMBER TIVA_WGPT2A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCWTIMER |= (1 << 2)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRWTIMER & (1 << 2))) +#define ST_ENABLE_CLOCK() (HWREG(SYSCTL_RCGCWTIMER) |= (1 << 2)) +#define ST_WAIT_CLOCK() while (!(HWREG(SYSCTL_PRWTIMER) & (1 << 2))) #elif TIVA_ST_TIMER_NUMBER == 3 #define ST_HANDLER TIVA_WGPT3A_HANDLER #define ST_NUMBER TIVA_WGPT3A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCWTIMER |= (1 << 3)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRWTIMER & (1 << 3))) +#define ST_ENABLE_CLOCK() (HWREG(SYSCTL_RCGCWTIMER) |= (1 << 3)) +#define ST_WAIT_CLOCK() while (!(HWREG(SYSCTL_PRWTIMER) & (1 << 3))) #elif TIVA_ST_TIMER_NUMBER == 4 #define ST_HANDLER TIVA_WGPT4A_HANDLER #define ST_NUMBER TIVA_WGPT4A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCWTIMER |= (1 << 4)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRWTIMER & (1 << 4))) +#define ST_ENABLE_CLOCK() (HWREG(SYSCTL_RCGCWTIMER) |= (1 << 4)) +#define ST_WAIT_CLOCK() while (!(HWREG(SYSCTL_PRWTIMER) & (1 << 4))) #elif TIVA_ST_TIMER_NUMBER == 5 #define ST_HANDLER TIVA_WGPT5A_HANDLER #define ST_NUMBER TIVA_WGPT5A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCWTIMER |= (1 << 5)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRWTIMER & (1 << 5))) +#define ST_ENABLE_CLOCK() (HWREG(SYSCTL_RCGCWTIMER) |= (1 << 5)) +#define ST_WAIT_CLOCK() while (!(HWREG(SYSCTL_PRWTIMER) & (1 << 5))) #else #error "TIVA_ST_USE_TIMER specifies an unsupported timer" #endif -#if (ST_CLOCK_SRC / OSAL_ST_FREQUENCY) - 1 > 0xFFFF +#if (TIVA_SYSCLK / OSAL_ST_FREQUENCY) - 1 > 0xFFFF #error "the selected ST frequency is not obtainable because TIM timer prescaler limits" #endif @@ -83,38 +83,38 @@ #if TIVA_ST_TIMER_NUMBER == 0 #define ST_HANDLER TIVA_GPT0A_HANDLER #define ST_NUMBER TIVA_GPT0A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCTIMER |= (1 << 0)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRTIMER & (1 << 0))) +#define ST_ENABLE_CLOCK() (HWREG(SYSCTL_RCGCTIMER) |= (1 << 0)) +#define ST_WAIT_CLOCK() while (!(HWREG(SYSCTL_PRTIMER) & (1 << 0))) #elif TIVA_ST_TIMER_NUMBER == 1 #define ST_HANDLER TIVA_GPT1A_HANDLER #define ST_NUMBER TIVA_GPT1A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCTIMER |= (1 << 1)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRTIMER & (1 << 1))) +#define ST_ENABLE_CLOCK() (HWREG(SYSCTL_RCGCTIMER) |= (1 << 1)) +#define ST_WAIT_CLOCK() while (!(HWREG(SYSCTL_PRTIMER) & (1 << 1))) #elif TIVA_ST_TIMER_NUMBER == 2 #define ST_HANDLER TIVA_GPT2A_HANDLER #define ST_NUMBER TIVA_GPT2A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCTIMER |= (1 << 2)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRTIMER & (1 << 2))) +#define ST_ENABLE_CLOCK() (HWREG(SYSCTL_RCGCTIMER) |= (1 << 2)) +#define ST_WAIT_CLOCK() while (!(HWREG(SYSCTL_PRTIMER) & (1 << 2))) #elif TIVA_ST_TIMER_NUMBER == 3 #define ST_HANDLER TIVA_GPT3A_HANDLER #define ST_NUMBER TIVA_GPT3A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCTIMER |= (1 << 3)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRTIMER & (1 << 3))) +#define ST_ENABLE_CLOCK() (HWREG(SYSCTL_RCGCTIMER) |= (1 << 3)) +#define ST_WAIT_CLOCK() while (!(HWREG(SYSCTL_PRTIMER) & (1 << 3))) #elif TIVA_ST_TIMER_NUMBER == 4 #define ST_HANDLER TIVA_GPT4A_HANDLER #define ST_NUMBER TIVA_GPT4A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCTIMER |= (1 << 4)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRTIMER & (1 << 4))) +#define ST_ENABLE_CLOCK() (HWREG(SYSCTL_RCGCTIMER) |= (1 << 4)) +#define ST_WAIT_CLOCK() while (!(HWREG(SYSCTL_PRTIMER) & (1 << 4))) #elif TIVA_ST_TIMER_NUMBER == 5 #define ST_HANDLER TIVA_GPT5A_HANDLER #define ST_NUMBER TIVA_GPT5A_NUMBER -#define ST_ENABLE_CLOCK() (SYSCTL->RCGCTIMER |= (1 << 5)) -#define ST_WAIT_CLOCK() while (!(SYSCTL->PRTIMER & (1 << 5))) +#define ST_ENABLE_CLOCK() (HWREG(SYSCTL_RCGCTIMER) |= (1 << 5)) +#define ST_WAIT_CLOCK() while (!(HWREG(SYSCTL_PRTIMER) & (1 << 5))) #else #error "TIVA_ST_USE_TIMER specifies an unsupported timer" @@ -184,10 +184,10 @@ OSAL_IRQ_HANDLER(ST_HANDLER) OSAL_IRQ_PROLOGUE(); - mis = TIVA_ST_TIM->MIS; - TIVA_ST_TIM->ICR = mis; + mis = HWREG(TIVA_ST_TIM + TIMER_O_MIS); + HWREG(TIVA_ST_TIM + TIMER_O_ICR) = mis; - if (mis & GPTM_IMR_TAMIM) { + if (mis & TIMER_IMR_TAMIM) { osalSysLockFromISR(); osalOsTimerHandlerI(); osalSysUnlockFromISR(); @@ -218,15 +218,17 @@ void st_lld_init(void) ST_WAIT_CLOCK(); /* Initializing the counter in free running down mode.*/ - TIVA_ST_TIM->CTL = 0; - TIVA_ST_TIM->CFG = GPTM_CFG_CFG_SPLIT; /* Timer split mode */ - TIVA_ST_TIM->TAMR = (GPTM_TAMR_TAMR_PERIODIC |/* Periodic mode */ - GPTM_TAMR_TAMIE | /* Match interrupt enable */ - GPTM_TAMR_TASNAPS); /* Snapshot mode */ - - TIVA_ST_TIM->TAPR = (TIVA_SYSCLK / OSAL_ST_FREQUENCY) - 1; - TIVA_ST_TIM->CTL = (GPTM_CTL_TAEN | /* Timer A enable */ - GPTM_CTL_TASTALL); /* Timer A stall when paused */ + HWREG(TIVA_ST_TIM + TIMER_O_CTL) = 0; + HWREG(TIVA_ST_TIM + TIMER_O_CFG) = TIMER_CFG_16_BIT; /* Timer split mode */ + HWREG(TIVA_ST_TIM + TIMER_O_TAMR) = ( + TIMER_TAMR_TAMR_PERIOD | /* Periodic mode */ + TIMER_TAMR_TAMIE | /* Match interrupt enable */ + TIMER_TAMR_TASNAPS); /* Snapshot mode */ + + HWREG(TIVA_ST_TIM + TIMER_O_TAPR) = (TIVA_SYSCLK / OSAL_ST_FREQUENCY) - 1; + HWREG(TIVA_ST_TIM + TIMER_O_CTL) = ( + TIMER_CTL_TAEN | /* Timer A enable */ + TIMER_CTL_TASTALL); /* Timer A stall when paused */ /* IRQ enabled.*/ nvicEnableVector(ST_NUMBER, TIVA_ST_IRQ_PRIORITY); diff --git a/os/hal/ports/TIVA/LLD/hal_st_lld.h b/os/hal/ports/TIVA/LLD/GPTM/hal_st_lld.h index 35bf008..a0b4dfc 100644 --- a/os/hal/ports/TIVA/LLD/hal_st_lld.h +++ b/os/hal/ports/TIVA/LLD/GPTM/hal_st_lld.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file Tiva/LLD/st_lld.h + * @file GPTM/hal_st_lld.h * @brief ST Driver subsystem low level driver header. * @details This header is designed to be include-able without having to * include other files from the HAL. @@ -29,7 +29,6 @@ #include "mcuconf.h" #include "tiva_registry.h" -#include "tiva_gpt.h" /*===========================================================================*/ /* Driver constants. */ @@ -82,37 +81,37 @@ #if !TIVA_HAS_WGPT0 #error "WGPT0 not present" #endif -#define TIVA_ST_TIM WGPT0 +#define TIVA_ST_TIM WTIMER0_BASE #elif TIVA_ST_TIMER_NUMBER == 1 #if !TIVA_HAS_WGPT1 #error "WGPT1 not present" #endif -#define TIVA_ST_TIM WGPT1 +#define TIVA_ST_TIM WTIMER1_BASE #elif TIVA_ST_TIMER_NUMBER == 2 #if !TIVA_HAS_WGPT2 #error "WGPT2 not present" #endif -#define TIVA_ST_TIM WGPT2 +#define TIVA_ST_TIM WTIMER2_BASE #elif TIVA_ST_TIMER_NUMBER == 3 #if !TIVA_HAS_WGPT3 #error "WGPT3 not present" #endif -#define TIVA_ST_TIM WGPT3 +#define TIVA_ST_TIM WTIMER3_BASE #elif TIVA_ST_TIMER_NUMBER == 4 #if !TIVA_HAS_WGPT4 #error "WGPT4 not present" #endif -#define TIVA_ST_TIM WGPT4 +#define TIVA_ST_TIM WTIMER4_BASE #elif TIVA_ST_TIMER_NUMBER == 5 #if !TIVA_HAS_WGPT5 #error "WGPT5 not present" #endif -#define TIVA_ST_TIM WGPT5 +#define TIVA_ST_TIM WTIMER5_BASE #else #error "TIVA_ST_USE_TIMER specifies an unsupported timer" @@ -124,37 +123,37 @@ #if !TIVA_HAS_GPT0 #error "GPT0 not present" #endif -#define TIVA_ST_TIM GPT0 +#define TIVA_ST_TIM TIMER0_BASE #elif TIVA_ST_TIMER_NUMBER == 1 #if !TIVA_HAS_GPT1 #error "GPT1 not present" #endif -#define TIVA_ST_TIM GPT1 +#define TIVA_ST_TIM TIMER1_BASE #elif TIVA_ST_TIMER_NUMBER == 2 #if !TIVA_HAS_GPT2 #error "GPT2 not present" #endif -#define TIVA_ST_TIM GPT2 +#define TIVA_ST_TIM TIMER2_BASE #elif TIVA_ST_TIMER_NUMBER == 3 #if !TIVA_HAS_GPT3 #error "GPT3 not present" #endif -#define TIVA_ST_TIM GPT3 +#define TIVA_ST_TIM TIMER3_BASE #elif TIVA_ST_TIMER_NUMBER == 4 #if !TIVA_HAS_GPT4 #error "GPT4 not present" #endif -#define TIVA_ST_TIM GPT4 +#define TIVA_ST_TIM TIMER4_BASE #elif TIVA_ST_TIMER_NUMBER == 5 #if !TIVA_HAS_GPT5 #error "GPT5 not present" #endif -#define TIVA_ST_TIM GPT5 +#define TIVA_ST_TIM TIMER5_BASE #else #error "TIVA_ST_TIMER_NUMBER specifies an unsupported timer" @@ -164,11 +163,6 @@ #error "wrong value defined for TIVA_ST_USE_WIDE_TIMER" #endif -#if OSAL_ST_MODE != OSAL_ST_MODE_NONE && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_ST_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to ST" -#endif - /*===========================================================================*/ /* Driver data structures and types. */ /*===========================================================================*/ @@ -202,7 +196,7 @@ extern "C" { */ static inline systime_t st_lld_get_counter(void) { - return (systime_t) (((systime_t) 0xffffffff) - TIVA_ST_TIM->TAR); + return (systime_t) (((systime_t) 0xffffffff) - HWREG(TIVA_ST_TIM + TIMER_O_TAV)); } /** @@ -216,9 +210,9 @@ static inline systime_t st_lld_get_counter(void) */ static inline void st_lld_start_alarm(systime_t time) { - TIVA_ST_TIM->TAMATCHR = (systime_t) (((systime_t) 0xffffffff) - time); - TIVA_ST_TIM->ICR = TIVA_ST_TIM->MIS; - TIVA_ST_TIM->IMR = GPTM_IMR_TAMIM; + HWREG(TIVA_ST_TIM + TIMER_O_TAMATCHR) = (systime_t) (((systime_t) 0xffffffff) - time); + HWREG(TIVA_ST_TIM + TIMER_O_ICR) = HWREG(TIVA_ST_TIM + TIMER_O_MIS); + HWREG(TIVA_ST_TIM + TIMER_O_IMR) = TIMER_IMR_TAMIM; } /** @@ -228,7 +222,7 @@ static inline void st_lld_start_alarm(systime_t time) */ static inline void st_lld_stop_alarm(void) { - TIVA_ST_TIM->IMR = 0; + HWREG(TIVA_ST_TIM + TIMER_O_IMR) = 0; } /** @@ -240,7 +234,7 @@ static inline void st_lld_stop_alarm(void) */ static inline void st_lld_set_alarm(systime_t time) { - TIVA_ST_TIM->TAMATCHR = (systime_t) (((systime_t) 0xffffffff) - time); + HWREG(TIVA_ST_TIM + TIMER_O_TAMATCHR) = (systime_t) (((systime_t) 0xffffffff) - time); } /** @@ -252,7 +246,7 @@ static inline void st_lld_set_alarm(systime_t time) */ static inline systime_t st_lld_get_alarm(void) { - return (systime_t) (((systime_t)0xffffffff) - TIVA_ST_TIM->TAMATCHR); + return (systime_t) (((systime_t)0xffffffff) - HWREG(TIVA_ST_TIM + TIMER_O_TAMATCHR)); } /** @@ -266,7 +260,7 @@ static inline systime_t st_lld_get_alarm(void) */ static inline bool st_lld_is_alarm_active(void) { - return (bool) ((TIVA_ST_TIM->IMR & GPTM_IMR_TAMIM) !=0); + return (bool) ((HWREG(TIVA_ST_TIM + TIMER_O_IMR) & TIMER_IMR_TAMIM) !=0); } #endif /* HAL_ST_LLD_H */ diff --git a/os/hal/ports/TIVA/LLD/I2C/driver.mk b/os/hal/ports/TIVA/LLD/I2C/driver.mk new file mode 100644 index 0000000..d327a19 --- /dev/null +++ b/os/hal/ports/TIVA/LLD/I2C/driver.mk @@ -0,0 +1,9 @@ +ifeq ($(USE_SMART_BUILD),yes) +ifneq ($(findstring HAL_USE_I2C TRUE,$(HALCONF)),) +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/I2C/hal_i2c_lld.c +endif +else +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/I2C/hal_i2c_lld.c +endif + +PLATFORMINC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/I2C diff --git a/os/hal/ports/TIVA/LLD/hal_i2c_lld.c b/os/hal/ports/TIVA/LLD/I2C/hal_i2c_lld.c index 5d80633..7ba7bad 100644 --- a/os/hal/ports/TIVA/LLD/hal_i2c_lld.c +++ b/os/hal/ports/TIVA/LLD/I2C/hal_i2c_lld.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file TIVA/LLD/i2c_lld.c + * @file I2C/hal_i2c_lld.c * @brief TM4C123x/TM4C129x I2C subsystem low level driver source. * * @addtogroup I2C @@ -30,6 +30,33 @@ /* Driver local definitions. */ /*===========================================================================*/ +// interrupt states +#define STATE_IDLE 0 +#define STATE_WRITE_NEXT 1 +#define STATE_WRITE_FINAL 2 +#define STATE_WAIT_ACK 3 +#define STATE_SEND_ACK 4 +#define STATE_READ_ONE 5 +#define STATE_READ_FIRST 6 +#define STATE_READ_NEXT 7 +#define STATE_READ_FINAL 8 +#define STATE_READ_WAIT 9 + +#define TIVA_I2C_SIGNLE_SEND (I2C_MCS_RUN | I2C_MCS_START | I2C_MCS_STOP) +#define TIVA_I2C_BURST_SEND_START (I2C_MCS_RUN | I2C_MCS_START) +#define TIVA_I2C_BURST_SEND_CONTINUE (I2C_MCS_RUN) +#define TIVA_I2C_BURST_SEND_FINISH (I2C_MCS_RUN | I2C_MCS_STOP) +#define TIVA_I2C_BURST_SEND_STOP (I2C_MCS_STOP) +#define TIVA_I2C_BURST_SEND_ERROR_STOP (I2C_MCS_STOP) + +#define TIVA_I2C_SINGLE_RECEIVE (I2C_MCS_RUN | I2C_MCS_START | I2C_MCS_STOP) +#define TIVA_I2C_BURST_RECEIVE_START (I2C_MCS_RUN | I2C_MCS_START | I2C_MCS_ACK) +#define TIVA_I2C_BURST_RECEIVE_CONTINUE (I2C_MCS_RUN | I2C_MCS_ACK) +#define TIVA_I2C_BURST_RECEIVE_FINISH (I2C_MCS_RUN | I2C_MCS_STOP) +#define TIVA_I2C_BURST_RECEIVE_ERROR_STOP (I2C_MCS_STOP) + +#define MTPR_VALUE ((TIVA_SYSCLK/(2*(6+4)*i2cp->config->clock_speed))-1) + /*===========================================================================*/ /* Driver constants. */ /*===========================================================================*/ @@ -125,19 +152,19 @@ I2CDriver I2CD10; */ static void i2c_lld_serve_interrupt(I2CDriver *i2cp) { - I2C_TypeDef *dp = i2cp->i2c; + uint32_t i2c = i2cp->i2c; uint32_t status; // clear MIS bit in MICR by writing 1 - dp->MICR = 1; + HWREG(i2c + I2C_O_MICR) = 1; // read interrupt status - status = dp->MCS; + status = HWREG(i2c + I2C_O_MCS); - if (status & TIVA_MCS_ERROR) { + if (status & I2C_MCS_ERROR) { i2cp->errors |= I2C_BUS_ERROR; } - if (status & TIVA_MCS_ARBLST) { + if (status & I2C_MCS_ARBLST) { i2cp->errors |= I2C_ARBITRATION_LOST; } @@ -152,11 +179,11 @@ static void i2c_lld_serve_interrupt(I2CDriver *i2cp) if (i2cp->txbytes == 1) { i2cp->intstate = STATE_WRITE_FINAL; } - dp->MDR = *(i2cp->txbuf); + HWREG(i2c + I2C_O_MDR) = *(i2cp->txbuf); i2cp->txbuf++; i2cp->txbytes--; // start transmission - dp->MCS = TIVA_I2C_BURST_SEND_CONTINUE; + HWREG(i2c + I2C_O_MCS) = TIVA_I2C_BURST_SEND_CONTINUE; break; } case STATE_WRITE_FINAL: { @@ -169,12 +196,12 @@ static void i2c_lld_serve_interrupt(I2CDriver *i2cp) else { i2cp->intstate = STATE_READ_FIRST; } - dp->MDR = *(i2cp->txbuf); + HWREG(i2c + I2C_O_MDR) = *(i2cp->txbuf); i2cp->txbuf++; // txbytes - 1 i2cp->txbytes--; // start transmission - dp->MCS = TIVA_I2C_BURST_SEND_FINISH; + HWREG(i2c + I2C_O_MCS) = TIVA_I2C_BURST_SEND_FINISH; break; } case STATE_WAIT_ACK: { @@ -189,10 +216,10 @@ static void i2c_lld_serve_interrupt(I2CDriver *i2cp) i2cp->addr |= 1; // set slave address - dp->MSA = i2cp->addr; - i2cp->rxbytes--; + HWREG(i2c + I2C_O_MSA) = i2cp->addr; + i2cp->rxbytes--; //start receiving - dp->MCS = TIVA_I2C_SINGLE_RECEIVE; + HWREG(i2c + I2C_O_MCS) = TIVA_I2C_SINGLE_RECEIVE; break; } @@ -208,10 +235,10 @@ static void i2c_lld_serve_interrupt(I2CDriver *i2cp) i2cp->addr |= 1; // set slave address - dp->MSA = i2cp->addr; - i2cp->rxbytes--; + HWREG(i2c + I2C_O_MSA) = i2cp->addr; + i2cp->rxbytes--; //start receiving - dp->MCS = TIVA_I2C_BURST_RECEIVE_START; + HWREG(i2c + I2C_O_MCS) = TIVA_I2C_BURST_RECEIVE_START; break; } @@ -219,27 +246,27 @@ static void i2c_lld_serve_interrupt(I2CDriver *i2cp) if(i2cp->rxbytes == 2) { i2cp->intstate = STATE_READ_FINAL; } - *(i2cp->rxbuf) = dp->MDR; + *(i2cp->rxbuf) = HWREG(i2c + I2C_O_MDR); i2cp->rxbuf++; i2cp->rxbytes--; //start receiving - dp->MCS = TIVA_I2C_BURST_RECEIVE_CONTINUE; + HWREG(i2c + I2C_O_MCS) = TIVA_I2C_BURST_RECEIVE_CONTINUE; break; } case STATE_READ_FINAL: { i2cp->intstate = STATE_READ_WAIT; - *(i2cp->rxbuf) = dp->MDR; + *(i2cp->rxbuf) = HWREG(i2c + I2C_O_MDR); i2cp->rxbuf++; - i2cp->rxbytes--; + i2cp->rxbytes--; //start receiving - dp->MCS = TIVA_I2C_BURST_RECEIVE_FINISH; + HWREG(i2c + I2C_O_MCS) = TIVA_I2C_BURST_RECEIVE_FINISH; break; } case STATE_READ_WAIT: { i2cp->intstate = STATE_IDLE; - *(i2cp->rxbuf) = dp->MDR; + *(i2cp->rxbuf) = HWREG(i2c + I2C_O_MDR); i2cp->rxbuf++; _i2c_wakeup_isr(i2cp); break; @@ -430,61 +457,61 @@ void i2c_lld_init(void) { #if TIVA_I2C_USE_I2C0 i2cObjectInit(&I2CD1); I2CD1.thread = NULL; - I2CD1.i2c = I2C0; + I2CD1.i2c = I2C0_BASE; #endif /* TIVA_I2C_USE_I2C0 */ #if TIVA_I2C_USE_I2C1 i2cObjectInit(&I2CD2); I2CD2.thread = NULL; - I2CD2.i2c = I2C1; + I2CD2.i2c = I2C1_BASE; #endif /* TIVA_I2C_USE_I2C1 */ #if TIVA_I2C_USE_I2C2 i2cObjectInit(&I2CD3); I2CD3.thread = NULL; - I2CD3.i2c = I2C2; + I2CD3.i2c = I2C2_BASE; #endif /* TIVA_I2C_USE_I2C2 */ #if TIVA_I2C_USE_I2C3 i2cObjectInit(&I2CD4); I2CD4.thread = NULL; - I2CD4.i2c = I2C3; + I2CD4.i2c = I2C3_BASE; #endif /* TIVA_I2C_USE_I2C3 */ #if TIVA_I2C_USE_I2C4 i2cObjectInit(&I2CD5); I2CD5.thread = NULL; - I2CD5.i2c = I2C4; + I2CD5.i2c = I2C4_BASE; #endif /* TIVA_I2C_USE_I2C4 */ #if TIVA_I2C_USE_I2C5 i2cObjectInit(&I2CD6); I2CD6.thread = NULL; - I2CD6.i2c = I2C5; + I2CD6.i2c = I2C5_BASE; #endif /* TIVA_I2C_USE_I2C5 */ #if TIVA_I2C_USE_I2C6 i2cObjectInit(&I2CD7); I2CD7.thread = NULL; - I2CD7.i2c = I2C6; + I2CD7.i2c = I2C6_BASE; #endif /* TIVA_I2C_USE_I2C6 */ #if TIVA_I2C_USE_I2C7 i2cObjectInit(&I2CD8); I2CD8.thread = NULL; - I2CD8.i2c = I2C7; + I2CD8.i2c = I2C7_BASE; #endif /* TIVA_I2C_USE_I2C7 */ #if TIVA_I2C_USE_I2C8 i2cObjectInit(&I2CD9); I2CD9.thread = NULL; - I2CD9.i2c = I2C8; + I2CD9.i2c = I2C8_BASE; #endif /* TIVA_I2C_USE_I2C8 */ #if TIVA_I2C_USE_I2C9 i2cObjectInit(&I2CD10); I2CD10.thread = NULL; - I2CD10.i2c = I2C9; + I2CD10.i2c = I2C9_BASE; #endif /* TIVA_I2C_USE_I2C9 */ } @@ -497,83 +524,123 @@ void i2c_lld_init(void) { */ void i2c_lld_start(I2CDriver *i2cp) { - I2C_TypeDef *dp = i2cp->i2c; + uint32_t i2c = i2cp->i2c; /* If in stopped state then enables the I2C clocks.*/ if (i2cp->state == I2C_STOP) { #if TIVA_I2C_USE_I2C0 if (&I2CD1 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 0); + HWREG(SYSCTL_RCGCI2C) |= (1 << 0); + + while (!(HWREG(SYSCTL_PRI2C) & (1 << 0))) + ; + nvicEnableVector(TIVA_I2C0_NUMBER, TIVA_I2C_I2C0_IRQ_PRIORITY); } #endif /* TIVA_I2C_USE_I2C0 */ #if TIVA_I2C_USE_I2C1 if (&I2CD2 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 1); + HWREG(SYSCTL_RCGCI2C) |= (1 << 1); + + while (!(HWREG(SYSCTL_PRI2C) & (1 << 1))) + ; + nvicEnableVector(TIVA_I2C1_NUMBER, TIVA_I2C_I2C1_IRQ_PRIORITY); } #endif /* TIVA_I2C_USE_I2C1 */ #if TIVA_I2C_USE_I2C2 if (&I2CD3 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 2); + HWREG(SYSCTL_RCGCI2C) |= (1 << 2); + + while (!(HWREG(SYSCTL_PRI2C) & (1 << 2))) + ; + nvicEnableVector(TIVA_I2C2_NUMBER, TIVA_I2C_I2C2_IRQ_PRIORITY); } #endif /* TIVA_I2C_USE_I2C2 */ #if TIVA_I2C_USE_I2C3 if (&I2CD4 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 3); + HWREG(SYSCTL_RCGCI2C) |= (1 << 3); + + while (!(HWREG(SYSCTL_PRI2C) & (1 << 3))) + ; + nvicEnableVector(TIVA_I2C3_NUMBER, TIVA_I2C_I2C3_IRQ_PRIORITY); } #endif /* TIVA_I2C_USE_I2C3 */ #if TIVA_I2C_USE_I2C4 if (&I2CD5 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 4); + HWREG(SYSCTL_RCGCI2C) |= (1 << 4); + + while (!(HWREG(SYSCTL_PRI2C) & (1 << 4))) + ; + nvicEnableVector(TIVA_I2C4_NUMBER, TIVA_I2C_I2C4_IRQ_PRIORITY); } #endif /* TIVA_I2C_USE_I2C4 */ #if TIVA_I2C_USE_I2C5 if (&I2CD6 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 5); + HWREG(SYSCTL_RCGCI2C) |= (1 << 5); + + while (!(HWREG(SYSCTL_PRI2C) & (1 << 5))) + ; + nvicEnableVector(TIVA_I2C5_NUMBER, TIVA_I2C_I2C5_IRQ_PRIORITY); } #endif /* TIVA_I2C_USE_I2C5 */ #if TIVA_I2C_USE_I2C6 if (&I2CD7 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 6); + HWREG(SYSCTL_RCGCI2C) |= (1 << 6); + + while (!(HWREG(SYSCTL_PRI2C) & (1 << 6))) + ; + nvicEnableVector(TIVA_I2C6_NUMBER, TIVA_I2C_I2C6_IRQ_PRIORITY); } #endif /* TIVA_I2C_USE_I2C6 */ #if TIVA_I2C_USE_I2C7 if (&I2CD8 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 7); + HWREG(SYSCTL_RCGCI2C) |= (1 << 7); + + while (!(HWREG(SYSCTL_PRI2C) & (1 << 7))) + ; + nvicEnableVector(TIVA_I2C7_NUMBER, TIVA_I2C_I2C7_IRQ_PRIORITY); } #endif /* TIVA_I2C_USE_I2C7 */ #if TIVA_I2C_USE_I2C8 if (&I2CD9 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 8); + HWREG(SYSCTL_RCGCI2C) |= (1 << 8); + + while (!(HWREG(SYSCTL_PRI2C) & (1 << 8))) + ; + nvicEnableVector(TIVA_I2C8_NUMBER, TIVA_I2C_I2C8_IRQ_PRIORITY); } #endif /* TIVA_I2C_USE_I2C7 */ #if TIVA_I2C_USE_I2C9 if (&I2CD10 == i2cp) { - SYSCTL->RCGCI2C |= (1 << 9); + HWREG(SYSCTL_RCGCI2C) |= (1 << 9); + + while (!(HWREG(SYSCTL_PRI2C) & (1 << 9))) + ; + nvicEnableVector(TIVA_I2C9_NUMBER, TIVA_I2C_I2C9_IRQ_PRIORITY); } #endif /* TIVA_I2C_USE_I2C7 */ } - dp->MCR = 0x10; - dp->MTPR = MTPR_VALUE; + HWREG(i2c + I2C_O_MCR) = 0x10; + HWREG(i2c + I2C_O_MTPR) = MTPR_VALUE; } /** @@ -585,7 +652,8 @@ void i2c_lld_start(I2CDriver *i2cp) */ void i2c_lld_stop(I2CDriver *i2cp) { - I2C_TypeDef *dp = i2cp->i2c; + uint32_t i2c = i2cp->i2c; + /* If not in stopped state then disables the I2C clock.*/ if (i2cp->state != I2C_STOP) { @@ -595,76 +663,76 @@ void i2c_lld_stop(I2CDriver *i2cp) #if TIVA_I2C_USE_I2C0 if (&I2CD1 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 0); + HWREG(SYSCTL_RCGCI2C) &= ~(1 << 0); nvicDisableVector(TIVA_I2C0_NUMBER); } #endif /* TIVA_I2C_USE_I2C0 */ #if TIVA_I2C_USE_I2C1 if (&I2CD2 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 1); + HWREG(SYSCTL_RCGCI2C) &= ~(1 << 1); nvicDisableVector(TIVA_I2C1_NUMBER); } #endif /* TIVA_I2C_USE_I2C1 */ #if TIVA_I2C_USE_I2C2 if (&I2CD3 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 2); + HWREG(SYSCTL_RCGCI2C) &= ~(1 << 2); nvicDisableVector(TIVA_I2C2_NUMBER); } #endif /* TIVA_I2C_USE_I2C2 */ #if TIVA_I2C_USE_I2C3 if (&I2CD4 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 3); + HWREG(SYSCTL_RCGCI2C) &= ~(1 << 3); nvicDisableVector(TIVA_I2C3_NUMBER); } #endif /* TIVA_I2C_USE_I2C3 */ #if TIVA_I2C_USE_I2C4 if (&I2CD5 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 4); + HWREG(SYSCTL_RCGCI2C) &= ~(1 << 4); nvicDisableVector(TIVA_I2C4_NUMBER); } #endif /* TIVA_I2C_USE_I2C4 */ #if TIVA_I2C_USE_I2C5 if (&I2CD6 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 5); + HWREG(SYSCTL_RCGCI2C) &= ~(1 << 5); nvicDisableVector(TIVA_I2C5_NUMBER); } #endif /* TIVA_I2C_USE_I2C5 */ #if TIVA_I2C_USE_I2C6 if (&I2CD7 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 6); + HWREG(SYSCTL_RCGCI2C) &= ~(1 << 6); nvicDisableVector(TIVA_I2C6_NUMBER); } #endif /* TIVA_I2C_USE_I2C6 */ #if TIVA_I2C_USE_I2C7 if (&I2CD8 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 7); + HWREG(SYSCTL_RCGCI2C) &= ~(1 << 7); nvicDisableVector(TIVA_I2C7_NUMBER); } #endif /* TIVA_I2C_USE_I2C7 */ #if TIVA_I2C_USE_I2C8 if (&I2CD9 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 8); + HWREG(SYSCTL_RCGCI2C) &= ~(1 << 8); nvicDisableVector(TIVA_I2C8_NUMBER); } #endif /* TIVA_I2C_USE_I2C8 */ #if TIVA_I2C_USE_I2C9 if (&I2CD10 == i2cp) { - SYSCTL->RCGCI2C &= ~(1 << 9); + HWREG(SYSCTL_RCGCI2C) &= ~(1 << 9); nvicDisableVector(TIVA_I2C9_NUMBER); } #endif /* TIVA_I2C_USE_I2C9 */ - dp->MCR = 0; - dp->MTPR = 0; + HWREG(i2c + I2C_O_MCR) = 0; + HWREG(i2c + I2C_O_MTPR) = 0; } } @@ -693,7 +761,7 @@ msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr, uint8_t *rxbuf, size_t rxbytes, systime_t timeout) { - I2C_TypeDef *dp = i2cp->i2c; + uint32_t i2c = i2cp->i2c; systime_t start, end; i2cp->rxbuf = rxbuf; @@ -710,7 +778,7 @@ msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr, /* Calculating the time window for the timeout on the busy bus condition.*/ start = osalOsGetSystemTimeX(); - end = start + OSAL_MS2ST(TIVA_I2C_BUSY_TIMEOUT); + end = start + OSAL_MS2I(TIVA_I2C_BUSY_TIMEOUT); /* Waits until BUSY flag is reset or, alternatively, for a timeout condition.*/ @@ -719,22 +787,22 @@ msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr, /* If the bus is not busy then the operation can continue, note, the loop is exited in the locked state.*/ - if ((dp->MCS & TIVA_MCS_BUSY) == 0) + if ((HWREG(i2c + I2C_O_MCS) & I2C_MCS_BUSY) == 0) break; /* If the system time went outside the allowed window then a timeout condition is returned.*/ - if (!osalOsIsTimeWithinX(osalOsGetSystemTimeX(), start, end)) + if (!osalTimeIsInRangeX(osalOsGetSystemTimeX(), start, end)) return MSG_TIMEOUT; osalSysUnlock(); } /* set slave address */ - dp->MSA = addr; + HWREG(i2c + I2C_O_MSA) = addr; /* Starts the operation.*/ - dp->MCS = TIVA_I2C_SINGLE_RECEIVE; + HWREG(i2c + I2C_O_MCS) = TIVA_I2C_SINGLE_RECEIVE; /* Waits for the operation completion or a timeout.*/ return osalThreadSuspendTimeoutS(&i2cp->thread, timeout); @@ -768,7 +836,7 @@ msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr, uint8_t *rxbuf, size_t rxbytes, systime_t timeout) { - I2C_TypeDef *dp = i2cp->i2c; + uint32_t i2c = i2cp->i2c; systime_t start, end; i2cp->rxbuf = rxbuf; @@ -784,7 +852,7 @@ msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr, /* Calculating the time window for the timeout on the busy bus condition.*/ start = osalOsGetSystemTimeX(); - end = start + OSAL_MS2ST(TIVA_I2C_BUSY_TIMEOUT); + end = start + OSAL_MS2I(TIVA_I2C_BUSY_TIMEOUT); /* Waits until BUSY flag is reset or, alternatively, for a timeout condition.*/ @@ -793,12 +861,13 @@ msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr, /* If the bus is not busy then the operation can continue, note, the loop is exited in the locked state.*/ - if ((dp->MCS & TIVA_MCS_BUSY) == 0) + if ((HWREG(i2c + I2C_O_MCS) & I2C_MCS_BUSY) == 0) break; /* If the system time went outside the allowed window then a timeout condition is returned.*/ - if (!osalOsIsTimeWithinX(osalOsGetSystemTimeX(), start, end)) + if (!osalTimeIsInRangeX(osalOsGetSystemTimeX(), start, end)) + return MSG_TIMEOUT; osalSysUnlock(); @@ -808,13 +877,13 @@ msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr, i2cp->addr = addr << 1 | 0; /* set slave address */ - dp->MSA = i2cp->addr; + HWREG(i2c + I2C_O_MSA) = i2cp->addr; /* enable interrupts */ - dp->MIMR = TIVA_MIMR_IM; + HWREG(i2c + I2C_O_MIMR) = I2C_MIMR_IM; /* put data in register */ - dp->MDR = *(i2cp->txbuf); + HWREG(i2c + I2C_O_MDR) = *(i2cp->txbuf); /* check if 1 or more bytes */ if (i2cp->txbytes == 1) { @@ -827,7 +896,7 @@ msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr, i2cp->intstate = STATE_READ_FIRST; } // single byte send - dp->MCS = TIVA_I2C_SIGNLE_SEND; + HWREG(i2c + I2C_O_MCS) = TIVA_I2C_SIGNLE_SEND; } else { if (i2cp->txbytes == 2) { @@ -839,7 +908,7 @@ msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr, i2cp->intstate = STATE_WRITE_NEXT; } // multiple bytes start send - dp->MCS = TIVA_I2C_BURST_SEND_START; + HWREG(i2c + I2C_O_MCS) = TIVA_I2C_BURST_SEND_START; } i2cp->txbuf++; diff --git a/os/hal/ports/TIVA/LLD/hal_i2c_lld.h b/os/hal/ports/TIVA/LLD/I2C/hal_i2c_lld.h index 460d231..66669f1 100644 --- a/os/hal/ports/TIVA/LLD/hal_i2c_lld.h +++ b/os/hal/ports/TIVA/LLD/I2C/hal_i2c_lld.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file TIVA/LLD/i2c_lld.h + * @file I2C/hal_i2c_lld.h * @brief TM4C123x/TM4C129x I2C subsystem low level driver header. * * @addtogroup I2C @@ -31,80 +31,6 @@ /* Driver constants. */ /*===========================================================================*/ -#define MTPR_VALUE ((TIVA_SYSCLK/(2*(6+4)*i2cp->config->clock_speed))-1) - -#define TIVA_MSA_RS (1 << 0) -#define TIVA_MSA_SA (127 << 1) - -#define TIVA_MCS_BUSY (1 << 0) -#define TIVA_MCS_ERROR (1 << 1) -#define TIVA_MCS_ADRACK (1 << 2) -#define TIVA_MCS_DATACK (1 << 3) -#define TIVA_MCS_ARBLST (1 << 4) -#define TIVA_MCS_IDLE (1 << 5) -#define TIVA_MCS_BUSBSY (1 << 6) -#define TIVA_MCS_CLKTO (1 << 7) - -#define TIVA_MCS_RUN (1 << 0) -#define TIVA_MCS_START (1 << 1) -#define TIVA_MCS_STOP (1 << 2) -#define TIVA_MCS_ACK (1 << 3) -#define TIVA_MCS_HS (1 << 4) - -#define TIVA_I2C_SIGNLE_SEND (TIVA_MCS_RUN | TIVA_MCS_START | TIVA_MCS_STOP) -#define TIVA_I2C_BURST_SEND_START (TIVA_MCS_RUN | TIVA_MCS_START) -#define TIVA_I2C_BURST_SEND_CONTINUE (TIVA_MCS_RUN) -#define TIVA_I2C_BURST_SEND_FINISH (TIVA_MCS_RUN | TIVA_MCS_STOP) -#define TIVA_I2C_BURST_SEND_STOP (TIVA_MCS_STOP) -#define TIVA_I2C_BURST_SEND_ERROR_STOP (TIVA_MCS_STOP) - -#define TIVA_I2C_SINGLE_RECEIVE (TIVA_MCS_RUN | TIVA_MCS_START | TIVA_MCS_STOP) -#define TIVA_I2C_BURST_RECEIVE_START (TIVA_MCS_RUN | TIVA_MCS_START | TIVA_MCS_ACK) -#define TIVA_I2C_BURST_RECEIVE_CONTINUE (TIVA_MCS_RUN | TIVA_MCS_ACK) -#define TIVA_I2C_BURST_RECEIVE_FINISH (TIVA_MCS_RUN | TIVA_MCS_STOP) -#define TIVA_I2C_BURST_RECEIVE_ERROR_STOP (TIVA_MCS_STOP) - -#define TIVA_MDR_DATA (255 << 0) - -#define TIVA_MTPR_TPR (127 << 0) -#define TIVA_MTPR_HS (1 << 7) - -#define TIVA_MIMR_IM (1 << 0) -#define TIVA_MIMR_CLKIM (1 << 1) - -#define TIVA_MRIS_RIS (1 << 0) -#define TIVA_MRIS_CLKRIS (1 << 1) - -#define TIVA_MMIS_MIS (1 << 0) -#define TIVA_MMIS_CLKMIS (1 << 1) - -#define TIVA_MICR_IC (1 << 0) -#define TIVA_MICR_CLKIC (1 << 1) - -#define TIVA_MCR_LPBK (1 << 0) -#define TIVA_MCR_MFE (1 << 4) -#define TIVA_MCR_SFE (1 << 5) -#define TIVA_MCR_GFE (1 << 6) - -#define TIVA_MCLKOCNT_CNTL (255 << 0) - -#define TIVA_MBMON_SCL (1 << 0) -#define TIVA_MBMON_SDA (1 << 1) - -#define TIVA_MCR2_GFPW (7 << 4) - -// interrupt states -#define STATE_IDLE 0 -#define STATE_WRITE_NEXT 1 -#define STATE_WRITE_FINAL 2 -#define STATE_WAIT_ACK 3 -#define STATE_SEND_ACK 4 -#define STATE_READ_ONE 5 -#define STATE_READ_FIRST 6 -#define STATE_READ_NEXT 7 -#define STATE_READ_FINAL 8 -#define STATE_READ_WAIT 9 - /*===========================================================================*/ /* Driver pre-compile time settings. */ /*===========================================================================*/ @@ -440,7 +366,7 @@ struct I2CDriver { /** * @brief Pointer to the I2Cx registers block. */ - I2C_TypeDef *i2c; + uint32_t i2c; }; /*===========================================================================*/ diff --git a/os/hal/ports/TIVA/LLD/MAC/driver.mk b/os/hal/ports/TIVA/LLD/MAC/driver.mk new file mode 100644 index 0000000..3847ce8 --- /dev/null +++ b/os/hal/ports/TIVA/LLD/MAC/driver.mk @@ -0,0 +1,9 @@ +ifeq ($(USE_SMART_BUILD),yes) +ifneq ($(findstring HAL_USE_MAC TRUE,$(HALCONF)),) +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/MAC/hal_mac_lld.c +endif +else +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/MAC/hal_mac_lld.c +endif + +PLATFORMINC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/MAC diff --git a/os/hal/ports/TIVA/LLD/hal_mac_lld.c b/os/hal/ports/TIVA/LLD/MAC/hal_mac_lld.c index 04177b6..1f1f220 100644 --- a/os/hal/ports/TIVA/LLD/hal_mac_lld.c +++ b/os/hal/ports/TIVA/LLD/MAC/hal_mac_lld.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file TIVA/mac_lld.c + * @file MAC/hal_mac_lld.c * @brief MAC Driver subsystem low level driver source. * * @addtogroup MAC @@ -89,10 +89,10 @@ static uint32_t tb[TIVA_MAC_TRANSMIT_BUFFERS][BUFFER_SIZE]; */ static void mii_write(MACDriver *macp, uint32_t reg, uint32_t value) { - ETH->MIIDATA = value; - ETH->MIIADDR = macp->phyaddr | (reg << 6) | MACMIIADDR_CR | EMAC_MIIADDR_MIIW | EMAC_MIIADDR_MIIB; + HWREG(EMAC0_BASE + EMAC_O_MIIDATA) = value; + HWREG(EMAC0_BASE + EMAC_O_MIIADDR) = macp->phyaddr | (reg << 6) | MACMIIADDR_CR | EMAC_MIIADDR_MIIW | EMAC_MIIADDR_MIIB; - while ((ETH->MIIADDR & EMAC_MIIADDR_MIIB) != 0) + while ((HWREG(EMAC0_BASE + EMAC_O_MIIADDR) & EMAC_MIIADDR_MIIB) != 0) ; } @@ -126,12 +126,12 @@ static void mii_write_extended(MACDriver *macp, uint32_t reg, uint32_t value) */ static uint32_t mii_read(MACDriver *macp, uint32_t reg) { - ETH->MIIADDR = macp->phyaddr | (reg << 6) | MACMIIADDR_CR | EMAC_MIIADDR_MIIB; + HWREG(EMAC0_BASE + EMAC_O_MIIADDR) = macp->phyaddr | (reg << 6) | MACMIIADDR_CR | EMAC_MIIADDR_MIIB; - while ((ETH->MIIADDR & EMAC_MIIADDR_MIIB) != 0) + while ((HWREG(EMAC0_BASE + EMAC_O_MIIADDR) & EMAC_MIIADDR_MIIB) != 0) ; - return ETH->MIIDATA; + return HWREG(EMAC0_BASE + EMAC_O_MIIDATA); } /** @@ -171,7 +171,7 @@ static void mii_find_phy(MACDriver *macp) #endif for (i = 0; i < 31; i++) { macp->phyaddr = i << 11; - ETH->MIIDATA = (i << 6) | MACMIIADDR_CR; + HWREG(EMAC0_BASE + EMAC_O_MIIDATA) = (i << 6) | MACMIIADDR_CR; if ((mii_read(macp, TIVA_ID1) == (BOARD_PHY_ID >> 16)) && ((mii_read(macp, TIVA_ID2) & 0xFFF0) == (BOARD_PHY_ID & 0xFFF0))) { return; @@ -196,20 +196,20 @@ static void mac_lld_set_address(const uint8_t *p) { /* MAC address configuration, only a single address comparator is used, hash table not used.*/ - ETH->ADDR0H = ((uint32_t)p[5] << 8) | + HWREG(EMAC0_BASE + EMAC_O_ADDR0H) = ((uint32_t)p[5] << 8) | ((uint32_t)p[4] << 0); - ETH->ADDR0L = ((uint32_t)p[3] << 24) | + HWREG(EMAC0_BASE + EMAC_O_ADDR0L) = ((uint32_t)p[3] << 24) | ((uint32_t)p[2] << 16) | ((uint32_t)p[1] << 8) | ((uint32_t)p[0] << 0); - ETH->ADDR1H = 0x0000FFFF; - ETH->ADDR1L = 0xFFFFFFFF; - ETH->ADDR2H = 0x0000FFFF; - ETH->ADDR2L = 0xFFFFFFFF; - ETH->ADDR3H = 0x0000FFFF; - ETH->ADDR3L = 0xFFFFFFFF; - ETH->HASHTBLH = 0; - ETH->HASHTBLL = 0; + HWREG(EMAC0_BASE + EMAC_O_ADDR1H) = 0x0000FFFF; + HWREG(EMAC0_BASE + EMAC_O_ADDR1L) = 0xFFFFFFFF; + HWREG(EMAC0_BASE + EMAC_O_ADDR2H) = 0x0000FFFF; + HWREG(EMAC0_BASE + EMAC_O_ADDR2L) = 0xFFFFFFFF; + HWREG(EMAC0_BASE + EMAC_O_ADDR3H) = 0x0000FFFF; + HWREG(EMAC0_BASE + EMAC_O_ADDR3L) = 0xFFFFFFFF; + HWREG(EMAC0_BASE + EMAC_O_HASHTBLH) = 0; + HWREG(EMAC0_BASE + EMAC_O_HASHTBLL) = 0; } /*===========================================================================*/ @@ -222,8 +222,8 @@ CH_IRQ_HANDLER(TIVA_MAC_HANDLER) CH_IRQ_PROLOGUE(); - dmaris = ETH->DMARIS; - ETH->DMARIS = dmaris & 0x0001FFFF; /* Clear status bits.*/ + dmaris = HWREG(EMAC0_BASE + EMAC_O_DMARIS); + HWREG(EMAC0_BASE + EMAC_O_DMARIS) = dmaris & 0x0001FFFF; /* Clear status bits.*/ if (dmaris & (1 << 6)) { /* Data Received.*/ @@ -275,26 +275,26 @@ void mac_lld_init(void) } /* Enable MAC clock */ - SYSCTL->RCGCEMAC = 1; - while (SYSCTL->PREMAC != 0x01) + HWREG(SYSCTL_RCGCEMAC) = 1; + while (HWREG(SYSCTL_PREMAC) != 0x01) ; /* Set PHYHOLD bit */ - ETH->PC |= 1; + HWREG(EMAC0_BASE + EMAC_O_PC) |= 1; /* Enable PHY clock */ - SYSCTL->RCGCEPHY = 1; - while (SYSCTL->PREPHY != 0x01) + HWREG(SYSCTL_RCGCEPHY) = 1; + while (HWREG(SYSCTL_PREPHY) != 0x01) ; /* Enable power to PHY */ - SYSCTL->PCEPHY |= 1; - while (SYSCTL->PREPHY != 0x01) + HWREG(SYSCTL_PCEPHY) |= 1; + while (HWREG(SYSCTL_PREPHY) != 0x01) ; #if BOARD_PHY_RMII - ETH->PC = EMAC_PHY_CONFIG | (0x04 << 28); + HWREG(EMAC0_BASE + EMAC_O_PC) = EMAC_PHY_CONFIG | (0x04 << 28); #else - ETH->PC = EMAC_PHY_CONFIG; + HWREG(EMAC0_BASE + EMAC_O_PC) = EMAC_PHY_CONFIG; #endif /* @@ -310,12 +310,12 @@ void mac_lld_init(void) /* Set done bit after writing EMACPC register */ mii_write(ÐD1, TIVA_CFG1, (1 << 15) | mii_read(ÐD1, TIVA_CFG1)); - while(ETH->DMABUSMOD & 1) + while(HWREG(EMAC0_BASE + EMAC_O_DMABUSMOD) & 1) ; /* Reset MAC */ - ETH->DMABUSMOD |= 1; - while (ETH->DMABUSMOD & 1) + HWREG(EMAC0_BASE + EMAC_O_DMABUSMOD) |= 1; + while (HWREG(EMAC0_BASE + EMAC_O_DMABUSMOD) & 1) ; /* PHY address setup.*/ @@ -344,10 +344,10 @@ void mac_lld_init(void) #endif /* Disable MAC clock */ - SYSCTL->RCGCEMAC = 0; + HWREG(SYSCTL_RCGCEMAC) = 0; /* Disable PHY clock */ - SYSCTL->RCGCEPHY = 0; + HWREG(SYSCTL_RCGCEPHY) = 0; } /** @@ -374,13 +374,13 @@ void mac_lld_start(MACDriver *macp) macp->txptr = (tiva_eth_tx_descriptor_t *)td; /* Enable MAC clock */ - SYSCTL->RCGCEMAC = 1; - while (SYSCTL->PREMAC != 0x01) + HWREG(SYSCTL_RCGCEMAC) = 1; + while (HWREG(SYSCTL_PREMAC) != 0x01) ; /* Enable PHY clock */ - SYSCTL->RCGCEPHY = 1; - while (!SYSCTL->PREPHY) + HWREG(SYSCTL_RCGCEPHY) = 1; + while (!HWREG(SYSCTL_PREPHY)) ; /* ISR vector enabled.*/ @@ -392,9 +392,9 @@ void mac_lld_start(MACDriver *macp) #endif /* MAC configuration.*/ - ETH->FRAMEFLTR = 0; - ETH->FLOWCTL = 0; - ETH->VLANTG = 0; + HWREG(EMAC0_BASE + EMAC_O_FRAMEFLTR) = 0; + HWREG(EMAC0_BASE + EMAC_O_FLOWCTL) = 0; + HWREG(EMAC0_BASE + EMAC_O_VLANTG) = 0; /* MAC address setup.*/ if (macp->config->mac_address == NULL) @@ -406,30 +406,30 @@ void mac_lld_start(MACDriver *macp) Note that the complete setup of the MAC is performed when the link status is detected.*/ #if TIVA_MAC_IP_CHECKSUM_OFFLOAD - ETH->CFG = (1 << 10) | (1 << 3) | (1 << 2); + HWREG(EMAC0_BASE + EMAC_O_CFG) = (1 << 10) | (1 << 3) | (1 << 2); #else - ETH->CFG = (1 << 3) | (1 << 2); + HWREG(EMAC0_BASE + EMAC_O_CFG) = (1 << 3) | (1 << 2); #endif /* DMA configuration: Descriptor chains pointers.*/ - ETH->RXDLADDR = (uint32_t)rd; - ETH->TXDLADDR = (uint32_t)td; + HWREG(EMAC0_BASE + EMAC_O_RXDLADDR) = (uint32_t)rd; + HWREG(EMAC0_BASE + EMAC_O_TXDLADDR) = (uint32_t)td; /* Enabling required interrupt sources.*/ - ETH->DMARIS &= 0xFFFF; - ETH->DMAIM = (1 << 16) | (1 << 6) | (1 << 0); + HWREG(EMAC0_BASE + EMAC_O_DMARIS) &= 0xFFFF; + HWREG(EMAC0_BASE + EMAC_O_DMAIM) = (1 << 16) | (1 << 6) | (1 << 0); /* DMA general settings.*/ - ETH->DMABUSMOD = (1 << 25) | (1 << 17) | (1 << 8); + HWREG(EMAC0_BASE + EMAC_O_DMABUSMOD) = (1 << 25) | (1 << 17) | (1 << 8); /* Transmit FIFO flush.*/ - ETH->DMAOPMODE = (1 << 20); - while (ETH->DMAOPMODE & (1 << 20)) + HWREG(EMAC0_BASE + EMAC_O_DMAOPMODE) = (1 << 20); + while (HWREG(EMAC0_BASE + EMAC_O_DMAOPMODE) & (1 << 20)) ; /* DMA final configuration and start.*/ - ETH->DMAOPMODE = (1 << 26) | (1 << 25) | (1 << 21) | + HWREG(EMAC0_BASE + EMAC_O_DMAOPMODE) = (1 << 26) | (1 << 25) | (1 << 21) | (1 << 13) | (1 << 1); } @@ -449,16 +449,16 @@ void mac_lld_stop(MACDriver *macp) #endif /* MAC and DMA stopped.*/ - ETH->CFG = 0; - ETH->DMAOPMODE = 0; - ETH->DMAIM = 0; - ETH->DMARIS &= 0xFFFF; + HWREG(EMAC0_BASE + EMAC_O_CFG) = 0; + HWREG(EMAC0_BASE + EMAC_O_DMAOPMODE) = 0; + HWREG(EMAC0_BASE + EMAC_O_DMAIM) = 0; + HWREG(EMAC0_BASE + EMAC_O_DMARIS) &= 0xFFFF; /* MAC clocks stopped.*/ - SYSCTL->RCGCEMAC = 0; + HWREG(SYSCTL_RCGCEMAC) = 0; /* PHY clock stopped.*/ - SYSCTL->RCGCEPHY = 0; + HWREG(SYSCTL_RCGCEPHY) = 0; /* ISR vector disabled.*/ nvicDisableVector(TIVA_MAC_NUMBER); @@ -537,9 +537,9 @@ void mac_lld_release_transmit_descriptor(MACTransmitDescriptor *tdp) tdp->physdesc->locked = 0; /* If the DMA engine is stalled then a restart request is issued.*/ - if ((ETH->DMARIS & (0x7 << 20)) == (6 << 20)) { - ETH->DMARIS = (1 << 2); - ETH->TXPOLLD = 1; /* Any value is OK.*/ + if ((HWREG(EMAC0_BASE + EMAC_O_DMARIS) & (0x7 << 20)) == (6 << 20)) { + HWREG(EMAC0_BASE + EMAC_O_DMARIS) = (1 << 2); + HWREG(EMAC0_BASE + EMAC_O_TXPOLLD) = 1; /* Any value is OK.*/ } osalSysUnlock(); @@ -616,9 +616,9 @@ void mac_lld_release_receive_descriptor(MACReceiveDescriptor *rdp) rdp->physdesc->rdes0 = TIVA_RDES0_OWN; /* If the DMA engine is stalled then a restart request is issued.*/ - if ((ETH->STATUS & (0xf << 17)) == (4 << 17)) { - ETH->DMARIS = (1 << 7); - ETH->TXPOLLD = 1; /* Any value is OK.*/ + if ((HWREG(EMAC0_BASE + EMAC_O_STATUS) & (0xf << 17)) == (4 << 17)) { + HWREG(EMAC0_BASE + EMAC_O_DMARIS) = (1 << 7); + HWREG(EMAC0_BASE + EMAC_O_TXPOLLD) = 1; /* Any value is OK.*/ } osalSysUnlock(); @@ -638,7 +638,7 @@ bool mac_lld_poll_link_status(MACDriver *macp) { uint32_t maccfg, bmsr, bmcr; - maccfg = ETH->CFG; + maccfg = HWREG(EMAC0_BASE + EMAC_O_CFG); /* PHY CR and SR registers read.*/ (void)mii_read(macp, MII_BMSR); @@ -688,7 +688,7 @@ bool mac_lld_poll_link_status(MACDriver *macp) } /* Changes the mode in the MAC.*/ - ETH->CFG = maccfg; + HWREG(EMAC0_BASE + EMAC_O_CFG) = maccfg; /* Returns the link status.*/ return macp->link_up = true; diff --git a/os/hal/ports/TIVA/LLD/hal_mac_lld.h b/os/hal/ports/TIVA/LLD/MAC/hal_mac_lld.h index 98036bb..407bf6c 100644 --- a/os/hal/ports/TIVA/LLD/hal_mac_lld.h +++ b/os/hal/ports/TIVA/LLD/MAC/hal_mac_lld.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file TIVA/mac_lld.h + * @file MAC/hal_mac_lld.h * @brief MAC Driver subsystem low level driver header. * * @addtogroup MAC diff --git a/os/hal/ports/TIVA/LLD/PWM/driver.mk b/os/hal/ports/TIVA/LLD/PWM/driver.mk new file mode 100644 index 0000000..0c82d6f --- /dev/null +++ b/os/hal/ports/TIVA/LLD/PWM/driver.mk @@ -0,0 +1,9 @@ +ifeq ($(USE_SMART_BUILD),yes) +ifneq ($(findstring HAL_USE_PWM TRUE,$(HALCONF)),) +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/PWM/hal_pwm_lld.c +endif +else +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/PWM/hal_pwm_lld.c +endif + +PLATFORMINC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/PWM diff --git a/os/hal/ports/TIVA/LLD/hal_pwm_lld.c b/os/hal/ports/TIVA/LLD/PWM/hal_pwm_lld.c index b223a9c..6f4535c 100644 --- a/os/hal/ports/TIVA/LLD/hal_pwm_lld.c +++ b/os/hal/ports/TIVA/LLD/PWM/hal_pwm_lld.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file TIVA/LLD/pwm_lld.c + * @file PWM/hal_pwm_lld.c * @brief TM4C123x/TM4C129x PWM subsystem low level driver. * * @addtogroup PWM @@ -30,13 +30,6 @@ /* Driver local definitions. */ /*===========================================================================*/ -#define PWM_INT_CMPBD (1 << 5) -#define PWM_INT_CMPBU (1 << 4) -#define PWM_INT_CMPAD (1 << 3) -#define PWM_INT_CMPAU (1 << 2) -#define PWM_INT_CNTLOAD (1 << 1) -#define PWM_INT_CNTZERO (1 << 0) - /*===========================================================================*/ /* Driver exported variables. */ /*===========================================================================*/ @@ -59,6 +52,8 @@ PWMDriver PWMD2; /* Driver local variables and types. */ /*===========================================================================*/ +static uint32_t pwm_generator_offsets[] = { PWM_GEN_0_OFFSET, PWM_GEN_1_OFFSET, PWM_GEN_2_OFFSET, PWM_GEN_3_OFFSET}; + /*===========================================================================*/ /* Driver local functions. */ /*===========================================================================*/ @@ -75,35 +70,36 @@ PWMDriver PWMD2; static void pwm_lld_serve_generator_interrupt (PWMDriver *pwmp, uint8_t i) { uint32_t isc; + uint32_t pwm = pwmp->pwm; - isc = pwmp->pwm->PWM[i].ISC; - pwmp->pwm->PWM[i].ISC = isc; + isc = HWREG(pwm + pwm_generator_offsets[i] + PWM_O_X_ISC); + HWREG(pwm + pwm_generator_offsets[i] + PWM_O_X_ISC) = isc; - if (((isc & PWM_INT_CMPAD) != 0) && + if (((isc & PWM_X_ISC_INTCMPAD) != 0) && (pwmp->config->channels[i * 2 + 0].callback != NULL)) { pwmp->config->channels[i * 2 + 0].callback(pwmp); } - if (((isc & PWM_INT_CMPAU) != 0) && + if (((isc & PWM_X_ISC_INTCMPAU) != 0) && (pwmp->config->channels[i * 2 + 0].callback != NULL)) { pwmp->config->channels[i * 2 + 0].callback(pwmp); } - if (((isc & PWM_INT_CMPBD) != 0) && + if (((isc & PWM_X_ISC_INTCMPBD) != 0) && (pwmp->config->channels[i * 2 + 1].callback != NULL)) { pwmp->config->channels[i * 2 + 1].callback(pwmp); } - if (((isc & PWM_INT_CMPBU) != 0) && + if (((isc & PWM_X_ISC_INTCMPBU) != 0) && (pwmp->config->channels[i * 2 + 1].callback != NULL)) { pwmp->config->channels[i * 2 + 1].callback(pwmp); } - if (((isc & PWM_INT_CNTLOAD) != 0) && (pwmp->config->callback != NULL)) { + if (((isc & PWM_X_ISC_INTCNTLOAD) != 0) && (pwmp->config->callback != NULL)) { pwmp->config->callback(pwmp); } - if (((isc & PWM_INT_CNTZERO) != 0) && (pwmp->config->callback != NULL)) { + if (((isc & PWM_X_ISC_INTCNTZERO) != 0) && (pwmp->config->callback != NULL)) { pwmp->config->callback(pwmp); } } @@ -311,13 +307,13 @@ void pwm_lld_init(void) #if TIVA_PWM_USE_PWM0 pwmObjectInit(&PWMD1); PWMD1.channels = PWM_CHANNELS; - PWMD1.pwm = PWM0; + PWMD1.pwm = PWM0_BASE; #endif #if TIVA_PWM_USE_PWM1 pwmObjectInit(&PWMD2); PWMD2.channels = PWM_CHANNELS; - PWMD2.pwm = PWM1; + PWMD2.pwm = PWM1_BASE; #endif } @@ -335,12 +331,17 @@ void pwm_lld_start(PWMDriver *pwmp) uint8_t i; uint32_t invert = 0; uint32_t enable = 0; + uint32_t pwm = pwmp->pwm; if (pwmp->state == PWM_STOP) { /* Clock activation.*/ #if TIVA_PWM_USE_PWM0 if (&PWMD1 == pwmp) { - SYSCTL->RCGCPWM |= (1 << 0); + HWREG(SYSCTL_RCGCPWM) |= (1 << 0); + + while (!(HWREG(SYSCTL_PRPWM) & (1 << 0))) + ; + nvicEnableVector(TIVA_PWM0FAULT_NUMBER, TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY); nvicEnableVector(TIVA_PWM0GEN0_NUMBER, TIVA_PWM_PWM0_0_IRQ_PRIORITY); @@ -352,7 +353,11 @@ void pwm_lld_start(PWMDriver *pwmp) #if TIVA_PWM_USE_PWM1 if (&PWMD2 == pwmp) { - SYSCTL->RCGCPWM |= (1 << 1); + HWREG(SYSCTL_RCGCPWM) |= (1 << 1); + + while (!(HWREG(SYSCTL_PRPWM) & (1 << 1))) + ; + nvicEnableVector(TIVA_PWM1FAULT_NUMBER, TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY); nvicEnableVector(TIVA_PWM1GEN0_NUMBER, TIVA_PWM_PWM1_0_IRQ_PRIORITY); @@ -364,20 +369,20 @@ void pwm_lld_start(PWMDriver *pwmp) } else { /* Driver re-configuration scenario, it must be stopped first.*/ - pwmp->pwm->PWM[0].CTL = 0; - pwmp->pwm->PWM[1].CTL = 0; - pwmp->pwm->PWM[2].CTL = 0; - pwmp->pwm->PWM[3].CTL = 0; + HWREG(pwm + PWM_O_0_CTL) = 0; + HWREG(pwm + PWM_O_1_CTL) = 0; + HWREG(pwm + PWM_O_2_CTL) = 0; + HWREG(pwm + PWM_O_3_CTL) = 0; } /* Timer configuration.*/ for (i = 0; i < (PWM_CHANNELS >> 1); i++) { - pwmp->pwm->PWM[i].CTL = 0; - pwmp->pwm->PWM[i].GEN[0] = 0x08C; - pwmp->pwm->PWM[i].GEN[1] = 0x80C; - pwmp->pwm->PWM[i].LOAD = (uint16_t)(pwmp->config->frequency - 1); - pwmp->pwm->PWM[i].CMP[0] = (uint16_t)(pwmp->period - 1); - pwmp->pwm->PWM[i].CMP[1] = (uint16_t)(pwmp->period - 1); + HWREG(pwm + pwm_generator_offsets[i] + PWM_O_X_CTL) = 0; + HWREG(pwm + pwm_generator_offsets[i] + PWM_O_X_GENA) = 0x08C; + HWREG(pwm + pwm_generator_offsets[i] + PWM_O_X_GENB) = 0x80C; + HWREG(pwm + pwm_generator_offsets[i] + PWM_O_X_LOAD) = (uint16_t)(pwmp->config->frequency - 1); + HWREG(pwm + pwm_generator_offsets[i] + PWM_O_X_CMPA) = (uint16_t)(pwmp->period - 1); + HWREG(pwm + pwm_generator_offsets[i] + PWM_O_X_CMPB) = (uint16_t)(pwmp->period - 1); } /* Output enables and polarities setup.*/ @@ -399,9 +404,9 @@ void pwm_lld_start(PWMDriver *pwmp) } } - pwmp->pwm->INVERT = invert; - pwmp->pwm->ENABLE = enable; - pwmp->pwm->ISC = 0xFFFFFFFF; + HWREG(pwm + PWM_O_INVERT) = invert; + HWREG(pwm + PWM_O_ENABLE) = enable; + HWREG(pwm + PWM_O_ISC) = 0xFFFFFFFF; } /** @@ -413,12 +418,14 @@ void pwm_lld_start(PWMDriver *pwmp) */ void pwm_lld_stop(PWMDriver *pwmp) { + uint32_t pwm = pwmp->pwm; + /* If in ready state then disables the PWM clock.*/ if (pwmp->state == PWM_READY) { - pwmp->pwm->PWM[0].CTL = 0; - pwmp->pwm->PWM[1].CTL = 0; - pwmp->pwm->PWM[2].CTL = 0; - pwmp->pwm->PWM[3].CTL = 0; + HWREG(pwm + PWM_O_0_CTL) = 0; + HWREG(pwm + PWM_O_1_CTL) = 0; + HWREG(pwm + PWM_O_2_CTL) = 0; + HWREG(pwm + PWM_O_3_CTL) = 0; #if TIVA_PWM_USE_PWM0 if (&PWMD1 == pwmp) { @@ -427,7 +434,7 @@ void pwm_lld_stop(PWMDriver *pwmp) nvicDisableVector(TIVA_PWM0GEN1_NUMBER); nvicDisableVector(TIVA_PWM0GEN2_NUMBER); nvicDisableVector(TIVA_PWM0GEN3_NUMBER); - SYSCTL->RCGCPWM &= ~(1 << 0); + HWREG(SYSCTL_RCGCPWM) &= ~(1 << 0); } #endif @@ -438,7 +445,7 @@ void pwm_lld_stop(PWMDriver *pwmp) nvicDisableVector(TIVA_PWM1GEN1_NUMBER); nvicDisableVector(TIVA_PWM1GEN2_NUMBER); nvicDisableVector(TIVA_PWM1GEN3_NUMBER); - SYSCTL->RCGCPWM &= ~(1 << 1); + HWREG(SYSCTL_RCGCPWM) &= ~(1 << 1); } #endif } @@ -461,9 +468,16 @@ void pwm_lld_enable_channel(PWMDriver *pwmp, pwmchannel_t channel, pwmcnt_t width) { + uint32_t pwm = pwmp->pwm; + /* Changing channel duty cycle on the fly.*/ - pwmp->pwm->PWM[channel >> 1].CMP[channel & 1] = width; - pwmp->pwm->PWM[channel >> 1].CTL |= (1 << 0); + if (channel & 1) + HWREG(pwm + pwm_generator_offsets[channel >> 1] + PWM_O_X_CMPB) = width; + else + HWREG(pwm + pwm_generator_offsets[channel >> 1] + PWM_O_X_CMPA) = width; + + + HWREG(pwm + pwm_generator_offsets[channel >> 1] + PWM_O_X_CTL) = (1 << 0); } /** @@ -480,8 +494,14 @@ void pwm_lld_enable_channel(PWMDriver *pwmp, */ void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) { - pwmp->pwm->PWM[channel >> 1].CMP[channel & 1] = 0; - pwmp->pwm->PWM[channel >> 1].CTL &= ~(1 << 0); + uint32_t pwm = pwmp->pwm; + + if (channel & 1) + HWREG(pwm + pwm_generator_offsets[channel >> 1] + PWM_O_X_CMPB) = 0; + else + HWREG(pwm + pwm_generator_offsets[channel >> 1] + PWM_O_X_CMPA) = 0; + + HWREG(pwm + pwm_generator_offsets[channel >> 1] + PWM_O_X_CTL) = (1 << 0); } /** @@ -497,18 +517,19 @@ void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) { uint32_t inten; uint8_t i; + uint32_t pwm = pwmp->pwm; /* If the IRQ is not already enabled care must be taken to clear it, it is probably already pending because the timer is running.*/ for(i = 0; i < (PWM_CHANNELS >> 1); i++) { - inten = pwmp->pwm->PWM[i].INTEN; + inten = HWREG(pwm + pwm_generator_offsets[i] + PWM_O_X_INTEN); if ((inten & 0x03) == 0) { - pwmp->pwm->PWM[i].INTEN |= 0x03; - pwmp->pwm->PWM[i].ISC = 0x03; + HWREG(pwm + pwm_generator_offsets[i] + PWM_O_X_INTEN) |= 0x03; + HWREG(pwm + pwm_generator_offsets[i] + PWM_O_X_ISC) = 0x03; } } - pwmp->pwm->INTEN = 0x3f; + HWREG(pwm + PWM_O_INTEN) = 0x3f; } /** @@ -522,11 +543,14 @@ void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) */ void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) { - pwmp->pwm->PWM[0].INTEN &= ~(0x03); - pwmp->pwm->PWM[1].INTEN &= ~(0x03); - pwmp->pwm->PWM[2].INTEN &= ~(0x03); - pwmp->pwm->PWM[3].INTEN &= ~(0x03); - pwmp->pwm->INTEN &= ~(0x3F); + uint32_t pwm = pwmp->pwm; + + HWREG(pwm + PWM_O_0_INTEN) = ~(0x03); + HWREG(pwm + PWM_O_1_INTEN) = ~(0x03); + HWREG(pwm + PWM_O_2_INTEN) = ~(0x03); + HWREG(pwm + PWM_O_3_INTEN) = ~(0x03); + + HWREG(pwm + PWM_O_INTEN) &= ~(0x3F); } /** @@ -543,13 +567,14 @@ void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) void pwm_lld_enable_channel_notification(PWMDriver *pwmp, pwmchannel_t channel) { - uint32_t inten = pwmp->pwm->PWM[channel >> 1].INTEN; + uint32_t pwm = pwmp->pwm; + uint32_t inten = HWREG(pwm + pwm_generator_offsets[channel >> 1] + PWM_O_X_ISC); /* If the IRQ is not already enabled care must be taken to clear it, it is probably already pending because the timer is running.*/ if ((inten & (0x03 << (((channel & 1) * 2) + 2))) == 0) { - pwmp->pwm->PWM[channel >> 1].INTEN |= (0x03 << (((channel & 1) * 2) + 2)); - pwmp->pwm->PWM[channel >> 1].ISC = (0x03 << (((channel & 1) * 2) + 2)); + HWREG(pwm + pwm_generator_offsets[channel >> 1] + PWM_O_X_INTEN) |= (0x03 << (((channel & 1) * 2) + 2)); + HWREG(pwm + pwm_generator_offsets[channel >> 1] + PWM_O_X_ISC) = (0x03 << (((channel & 1) * 2) + 2)); } } @@ -567,7 +592,9 @@ void pwm_lld_enable_channel_notification(PWMDriver *pwmp, void pwm_lld_disable_channel_notification(PWMDriver *pwmp, pwmchannel_t channel) { - pwmp->pwm->PWM[channel >> 1].INTEN &= ~(0x03 << (((channel & 1) * 2) + 2)); + uint32_t pwm = pwmp->pwm; + + HWREG(pwm + pwm_generator_offsets[channel >> 1] + PWM_O_X_INTEN) = ~(0x03 << (((channel & 1) * 2) + 2)); } #endif /* HAL_USE_PWM */ diff --git a/os/hal/ports/TIVA/LLD/hal_pwm_lld.h b/os/hal/ports/TIVA/LLD/PWM/hal_pwm_lld.h index ac64fe1..3fca631 100644 --- a/os/hal/ports/TIVA/LLD/hal_pwm_lld.h +++ b/os/hal/ports/TIVA/LLD/PWM/hal_pwm_lld.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file TIVA/LLD/pwm_lld.c + * @file PWM/hal_pwm_lld.c * @brief TM4C123x/TM4C129x PWM subsystem low level driver header. * * @addtogroup PWM @@ -304,7 +304,7 @@ struct PWMDriver { /** * @brief Pointer to the PWMx registers block. */ - PWM_TypeDef *pwm; + uint32_t pwm; }; /*===========================================================================*/ @@ -328,10 +328,10 @@ struct PWMDriver { * @notapi */ #define pwm_lld_change_period(pwmp, period) \ - ((pwmp)->pwm->PWM[0].LOAD = (uint16_t)((period) - 1)); \ - ((pwmp)->pwm->PWM[1].LOAD = (uint16_t)((period) - 1)); \ - ((pwmp)->pwm->PWM[2].LOAD = (uint16_t)((period) - 1)); \ - ((pwmp)->pwm->PWM[3].LOAD = (uint16_t)((period) - 1)) + HWREG((pwmp)->pwm + PWM_O_0_LOAD) = (uint16_t)((period) - 1); \ + HWREG((pwmp)->pwm + PWM_O_1_LOAD) = (uint16_t)((period) - 1); \ + HWREG((pwmp)->pwm + PWM_O_2_LOAD) = (uint16_t)((period) - 1); \ + HWREG((pwmp)->pwm + PWM_O_3_LOAD) = (uint16_t)((period) - 1) /*===========================================================================*/ /* External declarations. */ diff --git a/os/hal/ports/TIVA/LLD/SSI/driver.mk b/os/hal/ports/TIVA/LLD/SSI/driver.mk new file mode 100644 index 0000000..6f71487 --- /dev/null +++ b/os/hal/ports/TIVA/LLD/SSI/driver.mk @@ -0,0 +1,9 @@ +ifeq ($(USE_SMART_BUILD),yes) +ifneq ($(findstring HAL_USE_SPI TRUE,$(HALCONF)),) +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/SSI/hal_spi_lld.c +endif +else +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/SSI/hal_spi_lld.c +endif + +PLATFORMINC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/SSI diff --git a/os/hal/ports/TIVA/LLD/hal_spi_lld.c b/os/hal/ports/TIVA/LLD/SSI/hal_spi_lld.c index ded2b99..2255110 100644 --- a/os/hal/ports/TIVA/LLD/hal_spi_lld.c +++ b/os/hal/ports/TIVA/LLD/SSI/hal_spi_lld.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file TIVA/LLD/spi_lld.c + * @file SSI/hal_spi_lld.c * @brief TM4C123x/TM4C129x SPI subsystem low level driver. * * @addtogroup SPI @@ -77,19 +77,19 @@ static uint16_t dummyrx; */ static void spi_serve_interrupt(SPIDriver *spip) { - SSI_TypeDef *ssi = spip->ssi; - uint32_t mis = ssi->MIS; - uint32_t dmachis = UDMA->CHIS; + uint32_t ssi = spip->ssi; + uint32_t mis = HWREG(ssi + SSI_O_MIS); + uint32_t dmachis = HWREG(UDMA_CHIS); /* SPI error handling.*/ - if ((mis & (TIVA_MIS_RORMIS | TIVA_MIS_RTMIS)) != 0) { + if ((mis & (SSI_MIS_RORMIS | SSI_MIS_RTMIS)) != 0) { TIVA_SPI_SSI_ERROR_HOOK(spip); } - if ( (dmachis & ( (1 << spip->dmarxnr) | (1 << spip->dmatxnr) ) ) == - ( (1 << spip->dmarxnr) | (1 << spip->dmatxnr) ) ) { + if ((dmachis & ((1 << spip->dmarxnr) | (1 << spip->dmatxnr))) == + (uint32_t)((1 << spip->dmarxnr) | (1 << spip->dmatxnr))) { /* Clear DMA Channel interrupts.*/ - UDMA->CHIS = (1 << spip->dmarxnr) | (1 << spip->dmatxnr); + HWREG(UDMA_CHIS) = (1 << spip->dmarxnr) | (1 << spip->dmatxnr); /* Portable SPI ISR code defined in the high level driver, note, it is a macro.*/ @@ -180,7 +180,7 @@ void spi_lld_init(void) #if TIVA_SPI_USE_SSI0 spiObjectInit(&SPID1); - SPID1.ssi = SSI0; + SPID1.ssi = SSI0_BASE; SPID1.dmarxnr = TIVA_SPI_SSI0_RX_UDMA_CHANNEL; SPID1.dmatxnr = TIVA_SPI_SSI0_TX_UDMA_CHANNEL; SPID1.rxchnmap = TIVA_SPI_SSI0_RX_UDMA_MAPPING; @@ -189,7 +189,7 @@ void spi_lld_init(void) #if TIVA_SPI_USE_SSI1 spiObjectInit(&SPID2); - SPID2.ssi = SSI1; + SPID2.ssi = SSI1_BASE; SPID2.dmarxnr = TIVA_SPI_SSI1_RX_UDMA_CHANNEL; SPID2.dmatxnr = TIVA_SPI_SSI1_TX_UDMA_CHANNEL; SPID2.rxchnmap = TIVA_SPI_SSI1_RX_UDMA_MAPPING; @@ -198,7 +198,7 @@ void spi_lld_init(void) #if TIVA_SPI_USE_SSI2 spiObjectInit(&SPID3); - SPID3.ssi = SSI2; + SPID3.ssi = SSI2_BASE; SPID3.dmarxnr = TIVA_SPI_SSI2_RX_UDMA_CHANNEL; SPID3.dmatxnr = TIVA_SPI_SSI2_TX_UDMA_CHANNEL; SPID3.rxchnmap = TIVA_SPI_SSI2_RX_UDMA_MAPPING; @@ -207,7 +207,7 @@ void spi_lld_init(void) #if TIVA_SPI_USE_SSI3 spiObjectInit(&SPID4); - SPID4.ssi = SSI3; + SPID4.ssi = SSI3_BASE; SPID4.dmarxnr = TIVA_SPI_SSI3_RX_UDMA_CHANNEL; SPID4.dmatxnr = TIVA_SPI_SSI3_TX_UDMA_CHANNEL; SPID4.rxchnmap = TIVA_SPI_SSI3_RX_UDMA_MAPPING; @@ -235,8 +235,8 @@ void spi_lld_start(SPIDriver *spip) osalDbgAssert(!b, "channel already allocated"); /* Enable SSI0 module.*/ - SYSCTL->RCGCSSI |= (1 << 0); - while (!(SYSCTL->PRSSI & (1 << 0))) + HWREG(SYSCTL_RCGCSSI) |= (1 << 0); + while (!(HWREG(SYSCTL_PRSSI) & (1 << 0))) ; nvicEnableVector(TIVA_SSI0_NUMBER, TIVA_SPI_SSI0_IRQ_PRIORITY); @@ -251,14 +251,14 @@ void spi_lld_start(SPIDriver *spip) osalDbgAssert(!b, "channel already allocated"); /* Enable SSI0 module.*/ - SYSCTL->RCGCSSI |= (1 << 1); - while (!(SYSCTL->PRSSI & (1 << 1))) + HWREG(SYSCTL_RCGCSSI) |= (1 << 1); + while (!(HWREG(SYSCTL_PRSSI) & (1 << 1))) ; nvicEnableVector(TIVA_SSI1_NUMBER, TIVA_SPI_SSI1_IRQ_PRIORITY); } #endif -#if TIVASPI_USE_SSI2 +#if TIVA_SPI_USE_SSI2 if (&SPID2 == spip) { bool b; b = udmaChannelAllocate(spip->dmarxnr); @@ -267,8 +267,8 @@ void spi_lld_start(SPIDriver *spip) osalDbgAssert(!b, "channel already allocated"); /* Enable SSI0 module.*/ - SYSCTL->RCGCSSI |= (1 << 2); - while (!(SYSCTL->PRSSI & (1 << 2))) + HWREG(SYSCTL_RCGCSSI) |= (1 << 2); + while (!(HWREG(SYSCTL_PRSSI) & (1 << 2))) ; nvicEnableVector(TIVA_SSI2_NUMBER, TIVA_SPI_SSI2_IRQ_PRIORITY); @@ -283,40 +283,40 @@ void spi_lld_start(SPIDriver *spip) osalDbgAssert(!b, "channel already allocated"); /* Enable SSI0 module.*/ - SYSCTL->RCGCSSI |= (1 << 3); - while (!(SYSCTL->PRSSI & (1 << 3))) + HWREG(SYSCTL_RCGCSSI) |= (1 << 3); + while (!(HWREG(SYSCTL_PRSSI) & (1 << 3))) ; nvicEnableVector(TIVA_SSI3_NUMBER, TIVA_SPI_SSI3_IRQ_PRIORITY); } #endif - UDMA->CHMAP[spip->dmarxnr / 8] |= (spip->rxchnmap << (spip->dmarxnr % 8)); - UDMA->CHMAP[spip->dmatxnr / 8] |= (spip->txchnmap << (spip->dmatxnr % 8)); + HWREG(UDMA_CHMAP0 + (spip->dmarxnr / 8) * 4) |= (spip->rxchnmap << (spip->dmarxnr % 8)); + HWREG(UDMA_CHMAP0 + (spip->dmatxnr / 8) * 4) |= (spip->txchnmap << (spip->dmatxnr % 8)); } /* Set master operation mode.*/ - spip->ssi->CR1 = 0; + HWREG(spip->ssi + SSI_O_CR1) = 0; /* Clock configuration - System Clock.*/ - spip->ssi->CC = 0; + HWREG(spip->ssi + SSI_O_CC) = 0; /* Clear pending interrupts.*/ - spip->ssi->ICR = TIVA_ICR_RTIC | TIVA_ICR_RORIC; + HWREG(spip->ssi + SSI_O_ICR) = SSI_ICR_RTIC | SSI_ICR_RORIC; /* Enable Receive Time-Out and Receive Overrun Interrupts.*/ - spip->ssi->IM = TIVA_IM_RTIM | TIVA_IM_RORIM; + HWREG(spip->ssi + SSI_O_IM) = SSI_IM_RTIM | SSI_IM_RORIM; /* Configure the clock prescale divisor.*/ - spip->ssi->CPSR = spip->config->cpsr; + HWREG(spip->ssi + SSI_O_CPSR) = spip->config->cpsr; /* Serial clock rate, phase/polarity, data size, fixed SPI frame format.*/ - spip->ssi->CR0 = (spip->config->cr0 & ~TIVA_CR0_FRF_MASK) | TIVA_CR0_FRF(0); + HWREG(spip->ssi + SSI_O_CR0) = (spip->config->cr0 & ~SSI_CR0_FRF_M) | SSI_CR0_FRF_MOTO; /* Enable SSI.*/ - spip->ssi->CR1 |= TIVA_CR1_SSE; + HWREG(spip->ssi + SSI_O_CR1) |= SSI_CR1_SSE; /* Enable RX and TX DMA channels.*/ - spip->ssi->DMACTL = (TIVA_DMACTL_TXDMAE | TIVA_DMACTL_RXDMAE); + HWREG(spip->ssi + SSI_O_DMACTL) = (SSI_DMACTL_TXDMAE | SSI_DMACTL_RXDMAE); } /** @@ -329,9 +329,9 @@ void spi_lld_start(SPIDriver *spip) void spi_lld_stop(SPIDriver *spip) { if (spip->state != SPI_STOP) { - spip->ssi->CR1 = 0; - spip->ssi->CR0 = 0; - spip->ssi->CPSR = 0; + HWREG(spip->ssi + SSI_O_CR1) = 0; + HWREG(spip->ssi + SSI_O_CR0) = 0; + HWREG(spip->ssi + SSI_O_CPSR) = 0; udmaChannelRelease(spip->dmarxnr); udmaChannelRelease(spip->dmatxnr); @@ -359,6 +359,7 @@ void spi_lld_stop(SPIDriver *spip) } } +#if (SPI_SELECT_MODE == SPI_SELECT_MODE_LLD) || defined(__DOXYGEN__) /** * @brief Asserts the slave select signal and prepares for transfers. * @@ -368,7 +369,7 @@ void spi_lld_stop(SPIDriver *spip) */ void spi_lld_select(SPIDriver *spip) { - palClearPad(spip->config->ssport, spip->config->sspad); + /* No implementation on Tiva.*/ } /** @@ -381,8 +382,9 @@ void spi_lld_select(SPIDriver *spip) */ void spi_lld_unselect(SPIDriver *spip) { - palSetPad(spip->config->ssport, spip->config->sspad); + /* No implementation on Tiva.*/ } +#endif /** * @brief Ignores data on the SPI bus. @@ -399,20 +401,20 @@ void spi_lld_ignore(SPIDriver *spip, size_t n) { tiva_udma_table_entry_t *primary = udmaControlTable.primary; - if ((spip->config->cr0 & TIVA_CR0_DSS_MASK) < 8) { + if ((spip->config->cr0 & SSI_CR0_DSS_M) < 8) { /* Configure for 8-bit transfers.*/ primary[spip->dmatxnr].srcendp = (volatile void *)&dummytx; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_0 | + primary[spip->dmatxnr].dstendp = (void *)(spip->ssi + SSI_O_DR); + primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_NONE | + UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; - primary[spip->dmarxnr].srcendp = &spip->ssi->DR; + primary[spip->dmarxnr].srcendp = (void *)(spip->ssi + SSI_O_DR); primary[spip->dmarxnr].dstendp = &dummyrx; - primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_0 | + primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_NONE | + UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; @@ -420,17 +422,17 @@ void spi_lld_ignore(SPIDriver *spip, size_t n) else { /* Configure for 16-bit transfers.*/ primary[spip->dmatxnr].srcendp = (volatile void *)&dummytx; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_0 | + primary[spip->dmatxnr].dstendp = (void *)(spip->ssi + SSI_O_DR); + primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_NONE | + UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; - primary[spip->dmarxnr].srcendp = &spip->ssi->DR; + primary[spip->dmarxnr].srcendp = (void *)(spip->ssi + SSI_O_DR); primary[spip->dmarxnr].dstendp = &dummyrx; - primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_0 | + primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_NONE | + UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; @@ -470,20 +472,20 @@ void spi_lld_exchange(SPIDriver *spip, size_t n, const void *txbuf, void *rxbuf) { tiva_udma_table_entry_t *primary = udmaControlTable.primary; - if ((spip->config->cr0 & TIVA_CR0_DSS_MASK) < 8) { + if ((spip->config->cr0 & SSI_CR0_DSS_M) < 8) { /* Configure for 8-bit transfers.*/ primary[spip->dmatxnr].srcendp = (volatile void *)txbuf+n-1; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_0 | + primary[spip->dmatxnr].dstendp = (void *)(spip->ssi + SSI_O_DR); + primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_NONE | UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_8 | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; - primary[spip->dmarxnr].srcendp = &spip->ssi->DR; + primary[spip->dmarxnr].srcendp = (void *)(spip->ssi + SSI_O_DR); primary[spip->dmarxnr].dstendp = rxbuf+n-1; primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_8 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_0 | + UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; @@ -491,17 +493,17 @@ void spi_lld_exchange(SPIDriver *spip, size_t n, const void *txbuf, void *rxbuf) else { /* Configure for 16-bit transfers.*/ primary[spip->dmatxnr].srcendp = (volatile void *)txbuf+(n*2)-1; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_0 | + primary[spip->dmatxnr].dstendp = (void *)(spip->ssi + SSI_O_DR); + primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_NONE | UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_16 | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; - primary[spip->dmarxnr].srcendp = &spip->ssi->DR; + primary[spip->dmarxnr].srcendp = (void *)(spip->ssi + SSI_O_DR); primary[spip->dmarxnr].dstendp = rxbuf+(n*2)-1; primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_16 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_0 | + UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; @@ -539,20 +541,20 @@ void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) { tiva_udma_table_entry_t *primary = udmaControlTable.primary; - if ((spip->config->cr0 & TIVA_CR0_DSS_MASK) < 8) { + if ((spip->config->cr0 & SSI_CR0_DSS_M) < 8) { /* Configure for 8-bit transfers.*/ primary[spip->dmatxnr].srcendp = (volatile void *)txbuf+n-1; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_0 | + primary[spip->dmatxnr].dstendp = (void *)(spip->ssi + SSI_O_DR); + primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_NONE | UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_8 | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; - primary[spip->dmarxnr].dstendp = &spip->ssi->DR; + primary[spip->dmarxnr].dstendp = (void *)(spip->ssi + SSI_O_DR); primary[spip->dmarxnr].srcendp = &dummyrx; - primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_0 | + primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_NONE | + UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; @@ -560,17 +562,17 @@ void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) else { /* Configure for 16-bit transfers.*/ primary[spip->dmatxnr].srcendp = (volatile void *)txbuf+(n*2)-1; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_0 | + primary[spip->dmatxnr].dstendp = (void *)(spip->ssi + SSI_O_DR); + primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_NONE | UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_16 | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; - primary[spip->dmarxnr].dstendp = &spip->ssi->DR; + primary[spip->dmarxnr].dstendp = (void *)(spip->ssi + SSI_O_DR); primary[spip->dmarxnr].srcendp = &dummyrx; - primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_0 | + primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_NONE | + UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; @@ -608,20 +610,20 @@ void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) { tiva_udma_table_entry_t *primary = udmaControlTable.primary; - if ((spip->config->cr0 & TIVA_CR0_DSS_MASK) < 8) { + if ((spip->config->cr0 & SSI_CR0_DSS_M) < 8) { /* Configure for 8-bit transfers.*/ primary[spip->dmatxnr].srcendp = (volatile void *)&dummytx; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_0 | + primary[spip->dmatxnr].dstendp = (void *)(spip->ssi + SSI_O_DR); + primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_NONE | + UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; - primary[spip->dmarxnr].srcendp = &spip->ssi->DR; + primary[spip->dmarxnr].srcendp = (void *)(spip->ssi + SSI_O_DR); primary[spip->dmarxnr].dstendp = rxbuf+n-1; primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_8 | - UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_0 | + UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; @@ -629,17 +631,17 @@ void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) else { /* Configure for 16-bit transfers.*/ primary[spip->dmatxnr].srcendp = (volatile void *)&dummytx; - primary[spip->dmatxnr].dstendp = &spip->ssi->DR; - primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_0 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_0 | + primary[spip->dmatxnr].dstendp = (void *)(spip->ssi + SSI_O_DR); + primary[spip->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_NONE | + UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; - primary[spip->dmarxnr].srcendp = &spip->ssi->DR; + primary[spip->dmarxnr].srcendp = (void *)(spip->ssi + SSI_O_DR); primary[spip->dmarxnr].dstendp = rxbuf+(n*2)-1; primary[spip->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_16 | UDMA_CHCTL_DSTINC_16 | - UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_0 | + UDMA_CHCTL_SRCSIZE_16 | UDMA_CHCTL_SRCINC_NONE | UDMA_CHCTL_ARBSIZE_4 | UDMA_CHCTL_XFERSIZE(n) | UDMA_CHCTL_XFERMODE_BASIC; @@ -674,10 +676,10 @@ void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) */ uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame) { - spip->ssi->DR = (uint32_t)frame; - while ((spip->ssi->SR & TIVA_SR_RNE) == 0) + HWREG(spip->ssi + SSI_O_DR) = (uint32_t)frame; + while ((HWREG(spip->ssi + SSI_O_SR) & SSI_SR_RNE) == 0) ; - return (uint16_t)spip->ssi->DR; + return (uint16_t)HWREG(spip->ssi + SSI_O_DR); } #endif /* HAL_USE_SPI */ diff --git a/os/hal/ports/TIVA/LLD/hal_spi_lld.h b/os/hal/ports/TIVA/LLD/SSI/hal_spi_lld.h index 2adc9ed..c93c189 100644 --- a/os/hal/ports/TIVA/LLD/hal_spi_lld.h +++ b/os/hal/ports/TIVA/LLD/SSI/hal_spi_lld.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file TIVA/LLD/spi_lld.h + * @file SSI/hal_spi_lld.h * @brief TM4C123x/TM4C129x SPI subsystem low level driver. * * @addtogroup SPI @@ -32,89 +32,9 @@ /*===========================================================================*/ /** - * @name Control 0 - * @{ - */ -#define TIVA_CR0_DSS_MASK 0x0F -#define TIVA_CR0_DSS(n) ((n-1) << 0) - -#define TIVA_CR0_FRF_MASK (3 << 4) -#define TIVA_CR0_FRF(n) ((n) << 4) - -#define TIVA_CR0_SPO (1 << 6) -#define TIVA_CR0_SPH (1 << 7) - -#define TIVA_CR0_SRC_MASK (0xFF << 8) -#define TIVA_CR0_SRC(n) ((n) << 8) -/** @} */ - -/** - * @name Control 1 - * @{ - */ -#define TIVA_CR1_LBM (1 << 0) -#define TIVA_CR1_SSE (1 << 1) -#define TIVA_CR1_MS (1 << 2) -#define TIVA_CR1_SOD (1 << 3) -#define TIVA_CR1_EOT (1 << 4) -/** @} */ - -/** - * @name Status - * @{ - */ -#define TIVA_SR_TFE (1 << 0) -#define TIVA_SR_TNF (1 << 1) -#define TIVA_SR_RNE (1 << 2) -#define TIVA_SR_RFF (1 << 3) -#define TIVA_SR_BSY (1 << 4) -/** @} */ - -/** - * @name Interrupt Mask - * @{ - */ -#define TIVA_IM_RORIM (1 << 0) -#define TIVA_IM_RTIM (1 << 1) -#define TIVA_IM_RXIM (1 << 2) -#define TIVA_IM_TXIM (1 << 3) -/** @} */ - -/** - * @name Interrupt Status - * @{ - */ -#define TIVA_IS_RORIS (1 << 0) -#define TIVA_IS_RTIS (1 << 1) -#define TIVA_IS_RXIS (1 << 2) -#define TIVA_IS_TXIS (1 << 3) -/** @} */ - -/** - * @name Masked Interrupt Status - * @{ - */ -#define TIVA_MIS_RORMIS (1 << 0) -#define TIVA_MIS_RTMIS (1 << 1) -#define TIVA_MIS_RXMIS (1 << 2) -#define TIVA_MIS_TXMIS (1 << 3) -/** @} */ - -/** - * @name Interrupt Clear - * @{ + * @brief CR0 Serial Clock Rate helper. */ -#define TIVA_ICR_RORIC (1 << 0) -#define TIVA_ICR_RTIC (1 << 1) -/** @} */ - -/** - * @name DMA Control - * @{ - */ -#define TIVA_DMACTL_RXDMAE (1 << 0) -#define TIVA_DMACTL_TXDMAE (1 << 1) -/** @} */ +#define SSI_CR0_SCR(n) ((n) << 8) /*===========================================================================*/ /* Driver pre-compile time settings. */ @@ -236,7 +156,7 @@ #error "Invalid IRQ priority assigned to SSI2" #endif -#if TM4C123x_SPI_USE_SSI3 && \ +#if TIVA_SPI_USE_SSI3 && \ !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_SPI_SSI3_IRQ_PRIORITY) #error "Invalid IRQ priority assigned to SSI3" #endif @@ -245,6 +165,10 @@ #define TIVA_UDMA_REQUIRED #endif +#if SPI_SELECT_MODE == SPI_SELECT_MODE_LLD +#error "SPI_SELECT_MODE_LLD not supported by this driver" +#endif + /*===========================================================================*/ /* Driver data structures and types. */ /*===========================================================================*/ @@ -269,16 +193,34 @@ typedef struct { /** * @brief Operation complete callback or @p NULL. */ - spicallback_t end_cb; - /* End of the mandatory fields.*/ + spicallback_t end_cb; +#if (SPI_SELECT_MODE == SPI_SELECT_MODE_LINE) || defined(__DOXYGEN__) /** - * @brief The chip select line port. + * @brief The chip select line. */ - ioportid_t ssport; + ioline_t ssline; +#endif +#if (SPI_SELECT_MODE == SPI_SELECT_MODE_PORT) || defined(__DOXYGEN__) /** - * @brief The chip select line pad number. + * @brief The chip select port. */ - uint16_t sspad; + ioportid_t ssport; + /** + * @brief The chip select port mask. + */ + uint8fast_t ssmask; +#endif +#if (SPI_SELECT_MODE == SPI_SELECT_MODE_PAD) || defined(__DOXYGEN__) + /** + * @brief The chip select port. + */ + ioportid_t ssport; + /** + * @brief The chip select pad number. + */ + uint_fast8_t sspad; +#endif + /* End of the mandatory fields.*/ /** * @brief SSI CR0 initialization data. */ @@ -320,7 +262,7 @@ struct SPIDriver { /** * @brief Pointer to the SSI registers block. */ - SSI_TypeDef *ssi; + uint32_t ssi; /** * @brief Receive DMA channel number. */ @@ -369,8 +311,10 @@ extern "C" { void spi_lld_init(void); void spi_lld_start(SPIDriver *spip); void spi_lld_stop(SPIDriver *spip); +#if (SPI_SELECT_MODE == SPI_SELECT_MODE_LLD) || defined(__DOXYGEN__) void spi_lld_select(SPIDriver *spip); void spi_lld_unselect(SPIDriver *spip); +#endif void spi_lld_ignore(SPIDriver *spip, size_t n); void spi_lld_exchange(SPIDriver *spip, size_t n, const void *txbuf, void *rxbuf); diff --git a/os/hal/ports/TIVA/LLD/UART/driver.mk b/os/hal/ports/TIVA/LLD/UART/driver.mk new file mode 100644 index 0000000..e42f34a --- /dev/null +++ b/os/hal/ports/TIVA/LLD/UART/driver.mk @@ -0,0 +1,13 @@ +ifeq ($(USE_SMART_BUILD),yes) +ifneq ($(findstring HAL_USE_SERIAL TRUE,$(HALCONF)),) +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.c +endif +ifneq ($(findstring HAL_USE_UART TRUE,$(HALCONF)),) +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.c +endif +else +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.c +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.c +endif + +PLATFORMINC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/UART diff --git a/os/hal/ports/TIVA/LLD/hal_serial_lld.c b/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.c index bd1b81e..f1bda8d 100644 --- a/os/hal/ports/TIVA/LLD/hal_serial_lld.c +++ b/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file TIVA/LLD/serial_lld.c + * @file UART/hal_serial_lld.c * @brief Tiva low level serial driver code. * * @addtogroup SERIAL @@ -34,58 +34,42 @@ /* Driver exported variables. */ /*===========================================================================*/ -/** - * @brief UART0 serial driver identifier. - */ +/** @brief UART0 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART0 || defined(__DOXYGEN__) SerialDriver SD1; #endif -/** - * @brief UART1 serial driver identifier. - */ +/** @brief UART1 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART1 || defined(__DOXYGEN__) SerialDriver SD2; #endif -/** - * @brief UART2 serial driver identifier. - */ +/** @brief UART2 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART2 || defined(__DOXYGEN__) SerialDriver SD3; #endif -/** - * @brief UART3 serial driver identifier. - */ +/** @brief UART3 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART3 || defined(__DOXYGEN__) SerialDriver SD4; #endif -/** - * @brief UART4 serial driver identifier. - */ +/** @brief UART4 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART4 || defined(__DOXYGEN__) SerialDriver SD5; #endif -/** - * @brief UART5 serial driver identifier. - */ +/** @brief UART5 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART5 || defined(__DOXYGEN__) SerialDriver SD6; #endif -/** - * @brief UART6 serial driver identifier. - */ +/** @brief UART6 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART6 || defined(__DOXYGEN__) SerialDriver SD7; #endif -/** - * @brief UART7 serial driver identifier. - */ +/** @brief UART7 serial driver identifier.*/ #if TIVA_SERIAL_USE_UART7 || defined(__DOXYGEN__) SerialDriver SD8; #endif @@ -94,16 +78,80 @@ SerialDriver SD8; /* Driver local variables. */ /*===========================================================================*/ -/** - * @brief Driver default configuration. - */ +/** @brief Driver default configuration.*/ static const SerialConfig sd_default_config = { SERIAL_DEFAULT_BITRATE, - TIVA_LCRH_FEN | TIVA_LCRH_WLEN_8, - TIVA_IFLS_TXIFLSEL_1_8_F | TIVA_IFLS_RXIFLSEL_1_8_E + 0, + UART_LCRH_FEN | UART_LCRH_WLEN_8, + UART_IFLS_TX4_8 | UART_IFLS_RX7_8, + UART_CC_CS_SYSCLK }; +#if TIVA_SERIAL_USE_UART0 || defined(__DOXYGEN__) +/** @brief Input buffer for SD1.*/ +static uint8_t sd_in_buf1[TIVA_SERIAL_UART0_IN_BUF_SIZE]; + +/** @brief Output buffer for SD1.*/ +static uint8_t sd_out_buf1[TIVA_SERIAL_UART0_OUT_BUF_SIZE]; +#endif + +#if TIVA_SERIAL_USE_UART1 || defined(__DOXYGEN__) +/** @brief Input buffer for SD2.*/ +static uint8_t sd_in_buf2[TIVA_SERIAL_UART1_IN_BUF_SIZE]; + +/** @brief Output buffer for SD2.*/ +static uint8_t sd_out_buf2[TIVA_SERIAL_UART1_OUT_BUF_SIZE]; +#endif + +#if TIVA_SERIAL_USE_UART2 || defined(__DOXYGEN__) +/** @brief Input buffer for SD3.*/ +static uint8_t sd_in_buf3[TIVA_SERIAL_UART2_IN_BUF_SIZE]; + +/** @brief Output buffer for SD3.*/ +static uint8_t sd_out_buf3[TIVA_SERIAL_UART2_OUT_BUF_SIZE]; +#endif + +#if TIVA_SERIAL_USE_UART3 || defined(__DOXYGEN__) +/** @brief Input buffer for SD4.*/ +static uint8_t sd_in_buf4[TIVA_SERIAL_UART3_IN_BUF_SIZE]; + +/** @brief Output buffer for SD4.*/ +static uint8_t sd_out_buf4[TIVA_SERIAL_UART3_OUT_BUF_SIZE]; +#endif + +#if TIVA_SERIAL_USE_UART4 || defined(__DOXYGEN__) +/** @brief Input buffer for SD5.*/ +static uint8_t sd_in_buf5[TIVA_SERIAL_UART4_IN_BUF_SIZE]; + +/** @brief Output buffer for SD5.*/ +static uint8_t sd_out_buf5[TIVA_SERIAL_UART4_OUT_BUF_SIZE]; +#endif + +#if TIVA_SERIAL_USE_UART5 || defined(__DOXYGEN__) +/** @brief Input buffer for SD6.*/ +static uint8_t sd_in_buf6[TIVA_SERIAL_UART5_IN_BUF_SIZE]; + +/** @brief Output buffer for SD6.*/ +static uint8_t sd_out_buf6[TIVA_SERIAL_UART5_OUT_BUF_SIZE]; +#endif + +#if TIVA_SERIAL_USE_UART6 || defined(__DOXYGEN__) +/** @brief Input buffer for SD7.*/ +static uint8_t sd_in_buf7[TIVA_SERIAL_UART6_IN_BUF_SIZE]; + +/** @brief Output buffer for SD7.*/ +static uint8_t sd_out_buf7[TIVA_SERIAL_UART6_OUT_BUF_SIZE]; +#endif + +#if TIVA_SERIAL_USE_UART7 || defined(__DOXYGEN__) +/** @brief Input buffer for SD8.*/ +static uint8_t sd_in_buf8[TIVA_SERIAL_UART7_IN_BUF_SIZE]; + +/** @brief Output buffer for SD8.*/ +static uint8_t sd_out_buf8[TIVA_SERIAL_UART7_OUT_BUF_SIZE]; +#endif + /*===========================================================================*/ /* Driver local functions. */ /*===========================================================================*/ @@ -111,23 +159,55 @@ static const SerialConfig sd_default_config = /** * @brief UART initialization. * - * @param[in] sdp communication channel associated to the UART + * @param[in] sdp pointer to a @p SerialDriver object * @param[in] config the architecture-dependent serial driver configuration */ static void uart_init(SerialDriver *sdp, const SerialConfig *config) { - UART_TypeDef *u = sdp->uart; - uint32_t div; /* baud rate divisor */ - - /* disable the UART before any of the control registers are reprogrammed */ - u->CTL &= ~TIVA_CTL_UARTEN; - div = (((TIVA_SYSCLK * 8) / config->sc_speed) + 1) / 2; - u->IBRD = div / 64; /* integer portion of the baud rate divisor */ - u->FBRD = div % 64; /* fractional portion of the baud rate divisor */ - u->LCRH = config->sc_lcrh; /* set data format */ - u->IFLS = config->sc_ifls; - u->CTL |= TIVA_CTL_TXE | TIVA_CTL_RXE | TIVA_CTL_UARTEN; - u->IM |= TIVA_IM_RXIM | TIVA_IM_TXIM | TIVA_IM_RTIM; /* interrupts enable */ + uint32_t u = sdp->uart; + uint32_t brd; + uint32_t speed = config->speed; + uint32_t clock_source; + + if (config->ctl & UART_CTL_HSE) { + /* High speed mode is enabled, half the baud rate to compensate + * for high speed mode.*/ + speed = (speed + 1) / 2; + } + + if ((config->cc & UART_CC_CS_SYSCLK) == UART_CC_CS_SYSCLK) { + /* UART is clocked using the SYSCLK.*/ + clock_source = TIVA_SYSCLK * 8; + } + else { + /* UART is clocked using the PIOSC.*/ + clock_source = 16000000 * 8; + } + + /* Calculate the baud rate divisor */ + brd = ((clock_source / speed) + 1) / 2; + + /* Disable UART.*/ + HWREG(u + UART_O_CTL) &= ~UART_CTL_UARTEN; + + /* Set baud rate.*/ + HWREG(u + UART_O_IBRD) = brd / 64; + HWREG(u + UART_O_FBRD) = brd % 64; + + /* Line control/*/ + HWREG(u + UART_O_LCRH) = config->lcrh; + + /* Select clock source.*/ + HWREG(u + UART_O_CC) = config->cc & UART_CC_CS_M; + + /* FIFO configuration.*/ + HWREG(u + UART_O_IFLS) = config->ifls & (UART_IFLS_RX_M | UART_IFLS_TX_M); + + /* Note that some bits are enforced.*/ + HWREG(u + UART_O_CTL) = config->ctl | UART_CTL_RXE | UART_CTL_TXE | UART_CTL_UARTEN; + + /* Enable interrupts.*/ + HWREG(u + UART_O_IM) = UART_IM_RXIM | UART_IM_TXIM | UART_IM_RTIM; } /** @@ -135,9 +215,9 @@ static void uart_init(SerialDriver *sdp, const SerialConfig *config) * * @param[in] u pointer to an UART I/O block */ -static void uart_deinit(UART_TypeDef *u) +static void uart_deinit(uint32_t u) { - u->CTL &= ~TIVA_CTL_UARTEN; + HWREG(u + UART_O_CTL) &= ~UART_CTL_UARTEN; } /** @@ -150,13 +230,13 @@ static void set_error(SerialDriver *sdp, uint16_t err) { eventflags_t sts = 0; - if (err & TIVA_MIS_FEMIS) + if (err & UART_MIS_FEMIS) sts |= SD_FRAMING_ERROR; - if (err & TIVA_MIS_PEMIS) + if (err & UART_MIS_PEMIS) sts |= SD_PARITY_ERROR; - if (err & TIVA_MIS_BEMIS) + if (err & UART_MIS_BEMIS) sts |= SD_BREAK_DETECTED; - if (err & TIVA_MIS_OEMIS) + if (err & UART_MIS_OEMIS) sts |= SD_OVERRUN_ERROR; osalSysLockFromISR(); chnAddFlagsI(sdp, sts); @@ -174,64 +254,67 @@ static void set_error(SerialDriver *sdp, uint16_t err) */ static void serial_serve_interrupt(SerialDriver *sdp) { - UART_TypeDef *u = sdp->uart; - uint16_t mis = u->MIS; + uint32_t u = sdp->uart; + uint16_t mis = HWREG(u + UART_O_MIS); - u->ICR = mis; /* clear interrupts */ + HWREG(u + UART_O_ICR) = mis; /* clear interrupts */ - if (mis & (TIVA_MIS_FEMIS | TIVA_MIS_PEMIS | TIVA_MIS_BEMIS | TIVA_MIS_OEMIS)) { + if (mis & (UART_MIS_FEMIS | UART_MIS_PEMIS | UART_MIS_BEMIS | UART_MIS_OEMIS)) { set_error(sdp, mis); } - if ((mis & TIVA_MIS_RXMIS) || (mis & TIVA_MIS_RTMIS)) { + if ((mis & UART_MIS_RXMIS) || (mis & UART_MIS_RTMIS)) { osalSysLockFromISR(); if (iqIsEmptyI(&sdp->iqueue)) { chnAddFlagsI(sdp, CHN_INPUT_AVAILABLE); } osalSysUnlockFromISR(); - while ((u->FR & TIVA_FR_RXFE) == 0) { + while ((HWREG(u + UART_O_FR) & UART_FR_RXFE) == 0) { osalSysLockFromISR(); - if (iqPutI(&sdp->iqueue, u->DR) < Q_OK) { - chnAddFlagsI(sdp, SD_OVERRUN_ERROR); + if (iqPutI(&sdp->iqueue, HWREG(u + UART_O_DR)) < Q_OK) { + chnAddFlagsI(sdp, SD_QUEUE_FULL_ERROR); } osalSysUnlockFromISR(); } } - if (mis & TIVA_MIS_TXMIS) { - while ((u->FR & TIVA_FR_TXFF) == 0) { + if (mis & UART_MIS_TXMIS) { + while ((HWREG(u + UART_O_FR) & UART_FR_TXFF) == 0) { msg_t b; osalSysLockFromISR(); b = oqGetI(&sdp->oqueue); osalSysUnlockFromISR(); if (b < Q_OK) { - u->IM &= ~TIVA_IM_TXIM; + HWREG(u + UART_O_IM) &= ~UART_IM_TXIM; osalSysLockFromISR(); chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY); osalSysUnlockFromISR(); break; } - u->DR = b; + HWREG(u + UART_O_DR) = b; } } + + /* TODO: Physical transmission end. */ } /** - * @brief + * @brief Fill the hardware FIFO of a UART. */ static void fifo_load(SerialDriver *sdp) { - UART_TypeDef *u = sdp->uart; + uint32_t u = sdp->uart; - while ((u->FR & TIVA_FR_TXFF) == 0) { + while ((HWREG(u + UART_O_FR) & UART_FR_TXFF) == 0) { msg_t b = oqGetI(&sdp->oqueue); if (b < Q_OK) { chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY); return; } - u->DR = b; + HWREG(u + UART_O_DR) = b; } - u->IM |= TIVA_IM_TXIM; /* transmit interrupt enable */ + + HWREG(u + UART_O_IM) |= UART_IM_TXIM; /* transmit interrupt enable */ } /** @@ -326,13 +409,15 @@ static void notify8(io_queue_t *qp) /* Driver interrupt handlers. */ /*===========================================================================*/ -/** - * @brief UART0 IRQ handler. - */ #if TIVA_SERIAL_USE_UART0 || defined(__DOXYGEN__) #if !defined(TIVA_UART0_HANDLER) #error "TIVA_UART0_HANDLER not defined" #endif +/** + * @brief UART0 interrupt handler. + * + * @isr + */ CH_IRQ_HANDLER(TIVA_UART0_HANDLER) { CH_IRQ_PROLOGUE(); @@ -343,10 +428,16 @@ CH_IRQ_HANDLER(TIVA_UART0_HANDLER) } #endif + +#if TIVA_SERIAL_USE_UART1 || defined(__DOXYGEN__) +#if !defined(TIVA_UART1_HANDLER) +#error "TIVA_UART1_HANDLER not defined" +#endif /** - * @brief UART1 IRQ handler. + * @brief UART1 interrupt handler. + * + * @isr */ -#if TIVA_SERIAL_USE_UART1 || defined(__DOXYGEN__) CH_IRQ_HANDLER(TIVA_UART1_HANDLER) { CH_IRQ_PROLOGUE(); @@ -357,10 +448,15 @@ CH_IRQ_HANDLER(TIVA_UART1_HANDLER) } #endif +#if TIVA_SERIAL_USE_UART2 || defined(__DOXYGEN__) +#if !defined(TIVA_UART2_HANDLER) +#error "TIVA_UART2_HANDLER not defined" +#endif /** - * @brief UART2 IRQ handler. + * @brief UART2 interrupt handler. + * + * @isr */ -#if TIVA_SERIAL_USE_UART2 || defined(__DOXYGEN__) CH_IRQ_HANDLER(TIVA_UART2_HANDLER) { CH_IRQ_PROLOGUE(); @@ -371,10 +467,15 @@ CH_IRQ_HANDLER(TIVA_UART2_HANDLER) } #endif +#if TIVA_SERIAL_USE_UART3 || defined(__DOXYGEN__) +#if !defined(TIVA_UART3_HANDLER) +#error "TIVA_UART3_HANDLER not defined" +#endif /** - * @brief UART3 IRQ handler. + * @brief UART3 interrupt handler. + * + * @isr */ -#if TIVA_SERIAL_USE_UART3 || defined(__DOXYGEN__) CH_IRQ_HANDLER(TIVA_UART3_HANDLER) { CH_IRQ_PROLOGUE(); @@ -385,10 +486,15 @@ CH_IRQ_HANDLER(TIVA_UART3_HANDLER) } #endif +#if TIVA_SERIAL_USE_UART4 || defined(__DOXYGEN__) +#if !defined(TIVA_UART4_HANDLER) +#error "TIVA_UART4_HANDLER not defined" +#endif /** - * @brief UART4 IRQ handler. + * @brief UART4 interrupt handler. + * + * @isr */ -#if TIVA_SERIAL_USE_UART4 || defined(__DOXYGEN__) CH_IRQ_HANDLER(TIVA_UART4_HANDLER) { CH_IRQ_PROLOGUE(); @@ -399,10 +505,15 @@ CH_IRQ_HANDLER(TIVA_UART4_HANDLER) } #endif +#if TIVA_SERIAL_USE_UART5 || defined(__DOXYGEN__) +#if !defined(TIVA_UART5_HANDLER) +#error "TIVA_UART5_HANDLER not defined" +#endif /** - * @brief UART5 IRQ handler. + * @brief UART5 interrupt handler. + * + * @isr */ -#if TIVA_SERIAL_USE_UART5 || defined(__DOXYGEN__) CH_IRQ_HANDLER(TIVA_UART5_HANDLER) { CH_IRQ_PROLOGUE(); @@ -413,10 +524,15 @@ CH_IRQ_HANDLER(TIVA_UART5_HANDLER) } #endif +#if TIVA_SERIAL_USE_UART6 || defined(__DOXYGEN__) +#if !defined(TIVA_UART6_HANDLER) +#error "TIVA_UART6_HANDLER not defined" +#endif /** - * @brief UART6 IRQ handler. + * @brief UART6 interrupt handler. + * + * @isr */ -#if TIVA_SERIAL_USE_UART6 || defined(__DOXYGEN__) CH_IRQ_HANDLER(TIVA_UART6_HANDLER) { CH_IRQ_PROLOGUE(); @@ -427,10 +543,15 @@ CH_IRQ_HANDLER(TIVA_UART6_HANDLER) } #endif +#if TIVA_SERIAL_USE_UART7 || defined(__DOXYGEN__) +#if !defined(TIVA_UART7_HANDLER) +#error "TIVA_UART7_HANDLER not defined" +#endif /** - * @brief UART7 IRQ handler. + * @brief UART7 interrupt handler. + * + * @isr */ -#if TIVA_SERIAL_USE_UART7 || defined(__DOXYGEN__) CH_IRQ_HANDLER(TIVA_UART7_HANDLER) { CH_IRQ_PROLOGUE(); @@ -447,47 +568,65 @@ CH_IRQ_HANDLER(TIVA_UART7_HANDLER) /** * @brief Low level serial driver initialization. + * + * @notapi */ void sd_lld_init(void) { #if TIVA_SERIAL_USE_UART0 - sdObjectInit(&SD1, NULL, notify1); - SD1.uart = UART0; + sdObjectInit(&SD1); + iqObjectInit(&SD1.iqueue, sd_in_buf1, sizeof sd_in_buf1, NULL, &SD1); + oqObjectInit(&SD1.oqueue, sd_out_buf1, sizeof sd_out_buf1, notify1, &SD1); + SD1.uart = UART0_BASE; #endif #if TIVA_SERIAL_USE_UART1 - sdObjectInit(&SD2, NULL, notify2); - SD2.uart = UART1; + sdObjectInit(&SD2); + iqObjectInit(&SD2.iqueue, sd_in_buf2, sizeof sd_in_buf2, NULL, &SD2); + oqObjectInit(&SD2.oqueue, sd_out_buf2, sizeof sd_out_buf2, notify2, &SD2); + SD2.uart = UART1_BASE; #endif #if TIVA_SERIAL_USE_UART2 - sdObjectInit(&SD3, NULL, notify3); - SD3.uart = UART2; + sdObjectInit(&SD3); + iqObjectInit(&SD3.iqueue, sd_in_buf3, sizeof sd_in_buf3, NULL, &SD3); + oqObjectInit(&SD3.oqueue, sd_out_buf3, sizeof sd_out_buf3, notify3, &SD3); + SD3.uart = UART2_BASE; #endif #if TIVA_SERIAL_USE_UART3 - sdObjectInit(&SD4, NULL, notify4); - SD4.uart = UART3; + sdObjectInit(&SD4); + iqObjectInit(&SD4.iqueue, sd_in_buf4, sizeof sd_in_buf4, NULL, &SD4); + oqObjectInit(&SD4.oqueue, sd_out_buf4, sizeof sd_out_buf4, notify4, &SD4); + SD4.uart = UART3_BASE; #endif #if TIVA_SERIAL_USE_UART4 - sdObjectInit(&SD5, NULL, notify5); - SD5.uart = UART4; + sdObjectInit(&SD5); + iqObjectInit(&SD5.iqueue, sd_in_buf5, sizeof sd_in_buf5, NULL, &SD5); + oqObjectInit(&SD5.oqueue, sd_out_buf5, sizeof sd_out_buf5, notify5, &SD5); + SD5.uart = UART4_BASE; #endif #if TIVA_SERIAL_USE_UART5 - sdObjectInit(&SD6, NULL, notify6); - SD6.uart = UART5; + sdObjectInit(&SD6); + iqObjectInit(&SD6.iqueue, sd_in_buf6, sizeof sd_in_buf6, NULL, &SD6); + oqObjectInit(&SD6.oqueue, sd_out_buf6, sizeof sd_out_buf6, notify6, &SD6); + SD6.uart = UART5_BASE; #endif #if TIVA_SERIAL_USE_UART6 - sdObjectInit(&SD7, NULL, notify7); - SD7.uart = UART6; + sdObjectInit(&SD7); + iqObjectInit(&SD7.iqueue, sd_in_buf7, sizeof sd_in_buf7, NULL, &SD7); + oqObjectInit(&SD7.oqueue, sd_out_buf7, sizeof sd_out_buf7, notify7, &SD7); + SD7.uart = UART6_BASE; #endif #if TIVA_SERIAL_USE_UART7 - sdObjectInit(&SD8, NULL, notify8); - SD8.uart = UART7; + sdObjectInit(&SD8); + iqObjectInit(&SD8.iqueue, sd_in_buf8, sizeof sd_in_buf8, NULL, &SD8); + oqObjectInit(&SD8.oqueue, sd_out_buf8, sizeof sd_out_buf8, notify8, &SD8); + SD8.uart = UART7_BASE; #endif } @@ -498,6 +637,8 @@ void sd_lld_init(void) * @param[in] config the architecture-dependent serial driver configuration. * If this parameter is set to @p NULL then a default * configuration is used. + * + * @notapi */ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) { @@ -507,49 +648,81 @@ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) if (sdp->state == SD_STOP) { #if TIVA_SERIAL_USE_UART0 if (&SD1 == sdp) { - SYSCTL->RCGCUART |= (1 << 0); + HWREG(SYSCTL_RCGCUART) |= (1 << 0); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 0))) + ; + nvicEnableVector(TIVA_UART0_NUMBER, TIVA_SERIAL_UART0_PRIORITY); } #endif #if TIVA_SERIAL_USE_UART1 if (&SD2 == sdp) { - SYSCTL->RCGC.UART |= (1 << 1); + HWREG(SYSCTL_RCGCUART) |= (1 << 1); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 1))) + ; + nvicEnableVector(TIVA_UART1_NUMBER, TIVA_SERIAL_UART1_PRIORITY); } #endif #if TIVA_SERIAL_USE_UART2 if (&SD3 == sdp) { - SYSCTL->RCGC.UART |= (1 << 2); /* enable UART2 module */ + HWREG(SYSCTL_RCGCUART) |= (1 << 2); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 2))) + ; + nvicEnableVector(TIVA_UART2_NUMBER, TIVA_SERIAL_UART2_PRIORITY); } #endif #if TIVA_SERIAL_USE_UART3 if (&SD4 == sdp) { - SYSCTL->RCGC.UART |= (1 << 3); /* enable UART3 module */ + HWREG(SYSCTL_RCGCUART) |= (1 << 3); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 3))) + ; + nvicEnableVector(TIVA_UART3_NUMBER, TIVA_SERIAL_UART3_PRIORITY); } #endif #if TIVA_SERIAL_USE_UART4 if (&SD5 == sdp) { - SYSCTL->RCGC.UART |= (1 << 4); /* enable UART4 module */ + HWREG(SYSCTL_RCGCUART) |= (1 << 4); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 4))) + ; + nvicEnableVector(TIVA_UART4_NUMBER, TIVA_SERIAL_UART4_PRIORITY); } #endif #if TIVA_SERIAL_USE_UART5 if (&SD6 == sdp) { - SYSCTL->RCGC.UART |= (1 << 5); /* enable UART5 module */ + HWREG(SYSCTL_RCGCUART) |= (1 << 5); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 5))) + ; + nvicEnableVector(TIVA_UART5_NUMBER, TIVA_SERIAL_UART5_PRIORITY); } #endif #if TIVA_SERIAL_USE_UART6 if (&SD7 == sdp) { - SYSCTL->RCGC.UART |= (1 << 6); /* enable UART6 module */ + HWREG(SYSCTL_RCGCUART) |= (1 << 6); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 6))) + ; + nvicEnableVector(TIVA_UART6_NUMBER, TIVA_SERIAL_UART6_PRIORITY); } #endif #if TIVA_SERIAL_USE_UART7 if (&SD8 == sdp) { - SYSCTL->RCGC.UART |= (1 << 7); /* enable UART7 module */ + HWREG(SYSCTL_RCGCUART) |= (1 << 7); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 7))) + ; + nvicEnableVector(TIVA_UART7_NUMBER, TIVA_SERIAL_UART7_PRIORITY); } #endif @@ -563,6 +736,8 @@ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) * interrupt vector. * * @param[in] sdp pointer to a @p SerialDriver object + * + * @notapi */ void sd_lld_stop(SerialDriver *sdp) { @@ -570,56 +745,56 @@ void sd_lld_stop(SerialDriver *sdp) uart_deinit(sdp->uart); #if TIVA_SERIAL_USE_UART0 if (&SD1 == sdp) { - SYSCTL->RCGCUART &= ~(1 << 0); /* disable UART0 module */ + HWREG(SYSCTL_RCGCUART) &= ~(1 << 0); /* disable UART0 module */ nvicDisableVector(TIVA_UART0_NUMBER); return; } #endif #if TIVA_SERIAL_USE_UART1 if (&SD2 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 1); /* disable UART1 module */ + HWREG(SYSCTL_RCGCUART) &= ~(1 << 1); /* disable UART1 module */ nvicDisableVector(TIVA_UART1_NUMBER); return; } #endif #if TIVA_SERIAL_USE_UART2 if (&SD3 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 2); /* disable UART2 module */ + HWREG(SYSCTL_RCGCUART) &= ~(1 << 2); /* disable UART2 module */ nvicDisableVector(TIVA_UART2_NUMBER); return; } #endif #if TIVA_SERIAL_USE_UART3 if (&SD4 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 3); /* disable UART3 module */ + HWREG(SYSCTL_RCGCUART) &= ~(1 << 3); /* disable UART3 module */ nvicDisableVector(TIVA_UART3_NUMBER); return; } #endif #if TIVA_SERIAL_USE_UART4 if (&SD5 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 4); /* disable UART4 module */ + HWREG(SYSCTL_RCGCUART) &= ~(1 << 4); /* disable UART4 module */ nvicDisableVector(TIVA_UART4_NUMBER); return; } #endif #if TIVA_SERIAL_USE_UART5 if (&SD6 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 5); /* disable UART5 module */ + HWREG(SYSCTL_RCGCUART) &= ~(1 << 5); /* disable UART5 module */ nvicDisableVector(TIVA_UART5_NUMBER); return; } #endif #if TIVA_SERIAL_USE_UART6 if (&SD7 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 6); /* disable UART6 module */ + HWREG(SYSCTL_RCGCUART) &= ~(1 << 6); /* disable UART6 module */ nvicDisableVector(TIVA_UART6_NUMBER); return; } #endif #if TIVA_SERIAL_USE_UART7 if (&SD8 == sdp) { - SYSCTL->RCGC.UART &= ~(1 << 7); /* disable UART7 module */ + HWREG(SYSCTL_RCGCUART) &= ~(1 << 7); /* disable UART7 module */ nvicDisableVector(TIVA_UART7_NUMBER); return; } diff --git a/os/hal/ports/TIVA/LLD/hal_serial_lld.h b/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.h index 203ef6a..bde999e 100644 --- a/os/hal/ports/TIVA/LLD/hal_serial_lld.h +++ b/os/hal/ports/TIVA/LLD/UART/hal_serial_lld.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file TIVA/LLD/serial_lld.h + * @file UART/hal_serial_lld.h * @brief Tiva low level serial driver header. * * @addtogroup SERIAL @@ -32,162 +32,14 @@ /*===========================================================================*/ /** - * @name FR register bits definitions - * @{ - */ - -#define TIVA_FR_CTS (1 << 0) - -#define TIVA_FR_BUSY (1 << 3) - -#define TIVA_FR_RXFE (1 << 4) - -#define TIVA_FR_TXFF (1 << 5) - -#define TIVA_FR_RXFF (1 << 6) - -#define TIVA_FR_TXFE (1 << 7) - -/** - * @} - */ - -/** - * @name LCRH register bits definitions - * @{ - */ - -#define TIVA_LCRH_BRK (1 << 0) - -#define TIVA_LCRH_PEN (1 << 1) - -#define TIVA_LCRH_EPS (1 << 2) - -#define TIVA_LCRH_STP2 (1 << 3) - -#define TIVA_LCRH_FEN (1 << 4) - -#define TIVA_LCRH_WLEN_MASK (3 << 5) -#define TIVA_LCRH_WLEN_5 (0 << 5) -#define TIVA_LCRH_WLEN_6 (1 << 5) -#define TIVA_LCRH_WLEN_7 (2 << 5) -#define TIVA_LCRH_WLEN_8 (3 << 5) - -#define TIVA_LCRH_SPS (1 << 7) - -/** - * @} + * @brief Advanced buffering support switch. + * @details This constants enables the advanced buffering support in the + * low level driver, the queue buffer is no more part of the + * @p SerialDriver structure, each driver can have a different + * queue size. */ - -/** - * @name CTL register bits definitions - * @{ - */ - -#define TIVA_CTL_UARTEN (1 << 0) - -#define TIVA_CTL_SIREN (1 << 1) - -#define TIVA_CTL_SIRLP (1 << 2) - -#define TIVA_CTL_SMART (1 << 3) - -#define TIVA_CTL_EOT (1 << 4) - -#define TIVA_CTL_HSE (1 << 5) - -#define TIVA_CTL_LBE (1 << 7) - -#define TIVA_CTL_TXE (1 << 8) - -#define TIVA_CTL_RXE (1 << 9) - -#define TIVA_CTL_RTS (1 << 11) - -#define TIVA_CTL_RTSEN (1 << 14) - -#define TIVA_CTL_CTSEN (1 << 15) - -/** - * @} - */ - -/** - * @name IFLS register bits definitions - * @{ - */ - -#define TIVA_IFLS_TXIFLSEL_MASK (7 << 0) -#define TIVA_IFLS_TXIFLSEL_1_8_F (0 << 0) -#define TIVA_IFLS_TXIFLSEL_1_4_F (1 << 0) -#define TIVA_IFLS_TXIFLSEL_1_2_F (2 << 0) -#define TIVA_IFLS_TXIFLSEL_3_4_F (3 << 0) -#define TIVA_IFLS_TXIFLSEL_7_8_F (4 << 0) - -#define TIVA_IFLS_RXIFLSEL_MASK (7 << 3) -#define TIVA_IFLS_RXIFLSEL_7_8_E (0 << 3) -#define TIVA_IFLS_RXIFLSEL_3_4_E (1 << 3) -#define TIVA_IFLS_RXIFLSEL_1_2_E (2 << 3) -#define TIVA_IFLS_RXIFLSEL_1_4_E (3 << 3) -#define TIVA_IFLS_RXIFLSEL_1_8_E (4 << 3) - -/** - * @} - */ - -/** - * @name MIS register bits definitions - * @{ - */ - -#define TIVA_MIS_CTSMIS (1 << 1) - -#define TIVA_MIS_RXMIS (1 << 4) - -#define TIVA_MIS_TXMIS (1 << 5) - -#define TIVA_MIS_RTMIS (1 << 6) - -#define TIVA_MIS_FEMIS (1 << 7) - -#define TIVA_MIS_PEMIS (1 << 8) - -#define TIVA_MIS_BEMIS (1 << 9) - -#define TIVA_MIS_OEMIS (1 << 10) - -#define TIVA_MIS_9BITMIS (1 << 12) - -/** - * @} - */ - -/** - * @name IM register bits definitions - * @{ - */ - -#define TIVA_IM_CTSIM (1 << 1) - -#define TIVA_IM_RXIM (1 << 4) - -#define TIVA_IM_TXIM (1 << 5) - -#define TIVA_IM_RTIM (1 << 6) +#define SERIAL_ADVANCED_BUFFERING_SUPPORT TRUE -#define TIVA_IM_FEIM (1 << 7) - -#define TIVA_IM_PEIM (1 << 8) - -#define TIVA_IM_BEIM (1 << 9) - -#define TIVA_IM_OEIM (1 << 10) - -#define TIVA_IM_9BITIM (1 << 12) - -/** - * @} - */ /*===========================================================================*/ /* Driver pre-compile time settings. */ /*===========================================================================*/ @@ -196,7 +48,6 @@ * @name Configuration options * @{ */ - /** * @brief UART0 driver enable switch. * @details If set to @p TRUE the support for UART0 is included. @@ -326,8 +177,117 @@ #endif /** - * @} + * @brief Input buffer size for UART0. + */ +#if !defined(TIVA_SERIAL_UART0_IN_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART0_IN_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Output buffer size for UART0. + */ +#if !defined(TIVA_SERIAL_UART0_OUT_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART0_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Input buffer size for UART1. + */ +#if !defined(TIVA_SERIAL_UART1_IN_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART1_IN_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Output buffer size for UART1. + */ +#if !defined(TIVA_SERIAL_UART1_OUT_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART1_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Input buffer size for UART2. + */ +#if !defined(TIVA_SERIAL_UART2_IN_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART2_IN_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Output buffer size for UART2. + */ +#if !defined(TIVA_SERIAL_UART2_OUT_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART2_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Input buffer size for UART3. + */ +#if !defined(TIVA_SERIAL_UART3_IN_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART3_IN_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Output buffer size for UART3. + */ +#if !defined(TIVA_SERIAL_UART3_OUT_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART3_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Input buffer size for UART4. + */ +#if !defined(TIVA_SERIAL_UART4_IN_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART4_IN_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Output buffer size for UART4. */ +#if !defined(TIVA_SERIAL_UART4_OUT_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART4_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Input buffer size for UART5. + */ +#if !defined(TIVA_SERIAL_UART5_IN_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART5_IN_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Output buffer size for UART5. + */ +#if !defined(TIVA_SERIAL_UART5_OUT_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART5_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Input buffer size for UART6. + */ +#if !defined(TIVA_SERIAL_UART6_IN_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART6_IN_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Output buffer size for UART6. + */ +#if !defined(TIVA_SERIAL_UART6_OUT_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART6_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Input buffer size for UART7. + */ +#if !defined(TIVA_SERIAL_UART7_IN_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART7_IN_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif + +/** + * @brief Output buffer size for UART7. + */ +#if !defined(TIVA_SERIAL_UART7_OUT_BUF_SIZE) || defined(__DOXYGEN__) +#define TIVA_SERIAL_UART7_OUT_BUF_SIZE SERIAL_BUFFERS_SIZE +#endif +/** @} */ /*===========================================================================*/ /* Derived constants and error checks. */ @@ -388,22 +348,32 @@ * @brief Tiva Serial Driver configuration structure. * @details An instance of this structure must be passed to @p sdStart() * in order to configure and start a serial driver operations. + * @note This structure content is architecture dependent, each driver + * implementation defines its own version and the custom static + * initializers. */ typedef struct { /** * @brief Bit rate. */ - uint32_t sc_speed; + uint32_t speed; /* End of the mandatory fields. */ /** - * @brief Initialization value for the LCRH (Line Control) register. + * @brief Initialization value for the CTL register. + */ + uint16_t ctl; + /** + * @brief Initialization value for the LCRH register. + */ + uint8_t lcrh; + /** + * @brief Initialization value for the IFLS register. */ - uint32_t sc_lcrh; + uint8_t ifls; /** - * @brief Initialization value for the IFLS (Interrupt FIFO Level Select) - * register. + * @brief Initialization value for the CC register. */ - uint32_t sc_ifls; + uint8_t cc; } SerialConfig; /** @@ -417,13 +387,9 @@ typedef struct { input_queue_t iqueue; \ /* Output queue.*/ \ output_queue_t oqueue; \ - /* Input circular buffer.*/ \ - uint8_t ib[SERIAL_BUFFERS_SIZE]; \ - /* Output circular buffer.*/ \ - uint8_t ob[SERIAL_BUFFERS_SIZE]; \ /* End of the mandatory fields.*/ \ /* Pointer to the USART registers block.*/ \ - UART_TypeDef *uart; + uint32_t uart; /*===========================================================================*/ /* Driver macros. */ diff --git a/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.c b/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.c new file mode 100644 index 0000000..374ea6d --- /dev/null +++ b/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.c @@ -0,0 +1,826 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file UART/hal_uart_lld.c + * @brief Tiva low level UART driver code. + * + * @addtogroup UART + * @{ + */ + +#include "hal.h" + +#if HAL_USE_UART || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/** @brief UART0 UART driver identifier.*/ +#if TIVA_UART_USE_UART0 || defined(__DOXYGEN__) +UARTDriver UARTD1; +#endif + +/** @brief UART1 UART driver identifier.*/ +#if TIVA_UART_USE_UART1 || defined(__DOXYGEN__) +UARTDriver UARTD2; +#endif + +/** @brief UART2 UART driver identifier.*/ +#if TIVA_UART_USE_UART2 || defined(__DOXYGEN__) +UARTDriver UARTD3; +#endif + +/** @brief UART3 UART driver identifier.*/ +#if TIVA_UART_USE_UART3 || defined(__DOXYGEN__) +UARTDriver UARTD4; +#endif + +/** @brief UART4 UART driver identifier.*/ +#if TIVA_UART_USE_UART4 || defined(__DOXYGEN__) +UARTDriver UARTD5; +#endif + +/** @brief UART5 UART driver identifier.*/ +#if TIVA_UART_USE_UART5 || defined(__DOXYGEN__) +UARTDriver UARTD6; +#endif + +/** @brief UART6 UART driver identifier.*/ +#if TIVA_UART_USE_UART6 || defined(__DOXYGEN__) +UARTDriver UARTD7; +#endif + +/** @brief UART7 UART driver identifier.*/ +#if TIVA_UART_USE_UART7 || defined(__DOXYGEN__) +UARTDriver UARTD8; +#endif + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +/** + * @brief Status bits translation. + * + * @param[in] err UART LSR register value + * + * @return The error flags. + */ +static uartflags_t translate_errors(uint32_t err) +{ + uartflags_t sts = 0; + + if (err & UART_MIS_FEMIS) + sts |= UART_FRAMING_ERROR; + if (err & UART_MIS_PEMIS) + sts |= UART_PARITY_ERROR; + if (err & UART_MIS_BEMIS) + sts |= UART_BREAK_DETECTED; + if (err & UART_MIS_OEMIS) + sts |= UART_OVERRUN_ERROR; + + return sts; +} + +/** + * @brief Puts the receiver in the UART_RX_IDLE state. + * + * @param[in] uartp pointer to the @p UARTDriver object + */ +static void uart_enter_rx_idle_loop(UARTDriver *uartp) +{ + tiva_udma_table_entry_t *primary = udmaControlTable.primary; + + dmaChannelDisable(uartp->dmarxnr); + + /* Configure for 8-bit transfers.*/ + primary[uartp->dmarxnr].srcendp = (void *)(uartp->uart + UART_O_DR); + primary[uartp->dmarxnr].dstendp = (volatile void *)&uartp->rxbuf; + primary[uartp->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_8 | + UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_NONE | + UDMA_CHCTL_ARBSIZE_4 | + UDMA_CHCTL_XFERSIZE(1) | + UDMA_CHCTL_XFERMODE_BASIC; + + dmaChannelSingleBurst(uartp->dmarxnr); + dmaChannelPrimary(uartp->dmarxnr); + dmaChannelPriorityDefault(uartp->dmarxnr); + dmaChannelEnableRequest(uartp->dmarxnr); + + /* Enable DMA channel, transfer starts immediately.*/ + dmaChannelEnable(uartp->dmarxnr); +} + +/** + * @brief UART de-initialization. + * + * @param[in] uartp pointer to the @p UARTDriver object + */ +static void uart_stop(UARTDriver *uartp) +{ + /* Stops RX and TX DMA channels.*/ + dmaChannelDisable(uartp->dmarxnr); + dmaChannelDisable(uartp->dmatxnr); + + /* Stops USART operations.*/ + HWREG(uartp->uart + UART_O_CTL) &= ~UART_CTL_UARTEN; +} + +/** + * @brief UART initialization. + * + * @param[in] uartp pointer to a @p UARTDriver object + */ +static void uart_init(UARTDriver *uartp) +{ + uint32_t u = uartp->uart; + const UARTConfig *config = uartp->config; + uint32_t brd; + uint32_t speed = config->speed; + uint32_t clock_source; + + if (uartp->config->ctl & UART_CTL_HSE) { + /* High speed mode is enabled, half the baud rate to compensate + * for high speed mode.*/ + speed = (speed + 1) / 2; + } + + if ((config->cc & UART_CC_CS_M) == UART_CC_CS_SYSCLK) { + /* UART is clocked using the SYSCLK.*/ + clock_source = TIVA_SYSCLK * 8; + } + else { + /* UART is clocked using the PIOSC.*/ + clock_source = 16000000 * 8; + } + + /* Calculate the baud rate divisor */ + brd = ((clock_source / speed) + 1) / 2; + + /* Disable UART.*/ + HWREG(u + UART_O_CTL) &= ~UART_CTL_UARTEN; + + /* Set baud rate.*/ + HWREG(u + UART_O_IBRD) = brd / 64; + HWREG(u + UART_O_FBRD) = brd % 64; + + /* Line control/*/ + HWREG(u + UART_O_LCRH) = config->lcrh; + + /* Select clock source.*/ + HWREG(u + UART_O_CC) = config->cc & UART_CC_CS_M; + + /* FIFO configuration.*/ + HWREG(u + UART_O_IFLS) = config->ifls & (UART_IFLS_RX_M | UART_IFLS_TX_M); + + /* Enable interrupts.*/ + HWREG(u + UART_O_IM) = UART_IM_TXIM | UART_IM_OEIM | UART_IM_BEIM | UART_IM_PEIM | UART_IM_FEIM; + + /* Enable DMA for the UART */ + HWREG(u + UART_O_DMACTL) = UART_DMACTL_TXDMAE | UART_DMACTL_RXDMAE | UART_DMACTL_DMAERR; + + /* Note that some bits are enforced.*/ + HWREG(u + UART_O_CTL) = config->ctl | UART_CTL_RXE | UART_CTL_TXE | UART_CTL_UARTEN | UART_CTL_EOT; + + /* Starting the receiver idle loop.*/ + uart_enter_rx_idle_loop(uartp); +} + +/** + * @brief UART common service routine. + * + * @param[in] uartp pointer to the @p UARTDriver object + */ +static void uart_serve_interrupt(UARTDriver *uartp) +{ + uint32_t dmachis = HWREG(UDMA_CHIS); + uint32_t mis = HWREG(uartp->uart + UART_O_MIS); + + if (mis & UART_MIS_TXMIS) { + /* End of transfer */ + _uart_tx2_isr_code(uartp); + } + + if (mis & (UART_MIS_OEMIS | UART_MIS_BEMIS | UART_MIS_PEMIS | UART_MIS_FEMIS)) { + /* Error occurred */ + _uart_rx_error_isr_code(uartp, translate_errors(mis)); + } + + if (dmachis & (1 << uartp->dmarxnr)) { + if (uartp->rxstate == UART_RX_IDLE) { + /* Receiver in idle state, a callback is generated, if enabled, for each + received character and then the driver stays in the same state.*/ + _uart_rx_idle_code(uartp); + uart_enter_rx_idle_loop(uartp); + } + else { + /* Receiver in active state, a callback is generated, if enabled, after + a completed transfer.*/ + _uart_rx_complete_isr_code(uartp); + } + } + + if (dmachis & (1 << uartp->dmatxnr)) { + /* A callback is generated, if enabled, after a completed transfer.*/ + _uart_tx1_isr_code(uartp); + } +} + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + +#if TIVA_UART_USE_UART0 || defined(__DOXYGEN__) +#if !defined(TIVA_UART0_HANDLER) +#error "TIVA_UART0_HANDLER not defined" +#endif +/** + * @brief UART0 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART0_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD1); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART1 || defined(__DOXYGEN__) +#if !defined(TIVA_UART1_HANDLER) +#error "TIVA_UART1_HANDLER not defined" +#endif +/** + * @brief UART1 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART1_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD2); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART2 || defined(__DOXYGEN__) +#if !defined(TIVA_UART2_HANDLER) +#error "TIVA_UART2_HANDLER not defined" +#endif +/** + * @brief UART2 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART2_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD3); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART3 || defined(__DOXYGEN__) +#if !defined(TIVA_UART3_HANDLER) +#error "TIVA_UART3_HANDLER not defined" +#endif +/** + * @brief UART3 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART3_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD4); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART4 || defined(__DOXYGEN__) +#if !defined(TIVA_UART4_HANDLER) +#error "TIVA_UART4_HANDLER not defined" +#endif +/** + * @brief UART4 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART4_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD5); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART5 || defined(__DOXYGEN__) +#if !defined(TIVA_UART5_HANDLER) +#error "TIVA_UART5_HANDLER not defined" +#endif +/** + * @brief UART5 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART5_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD6); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART6 || defined(__DOXYGEN__) +#if !defined(TIVA_UART6_HANDLER) +#error "TIVA_UART6_HANDLER not defined" +#endif +/** + * @brief UART6 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART6_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD7); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +#if TIVA_UART_USE_UART7 || defined(__DOXYGEN__) +#if !defined(TIVA_UART7_HANDLER) +#error "TIVA_UART7_HANDLER not defined" +#endif +/** + * @brief UART7 interrupt handler. + * + * @isr + */ +OSAL_IRQ_HANDLER(TIVA_UART7_HANDLER) +{ + OSAL_IRQ_PROLOGUE(); + + uart_serve_interrupt(&UARTD8); + + OSAL_IRQ_EPILOGUE(); +} +#endif + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/** + * @brief Low level UART driver initialization. + * + * @notapi + */ +void uart_lld_init(void) +{ +#if TIVA_UART_USE_UART0 + uartObjectInit(&UARTD1); + UARTD1.uart = UART0_BASE; + UARTD1.dmarxnr = TIVA_UART_UART0_RX_UDMA_CHANNEL; + UARTD1.dmatxnr = TIVA_UART_UART0_TX_UDMA_CHANNEL; + UARTD1.rxchnmap = TIVA_UART_UART0_RX_UDMA_MAPPING; + UARTD1.txchnmap = TIVA_UART_UART0_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART1 + uartObjectInit(&UARTD2); + UARTD2.uart = UART1_BASE; + UARTD2.dmarxnr = TIVA_UART_UART1_RX_UDMA_CHANNEL; + UARTD2.dmatxnr = TIVA_UART_UART1_TX_UDMA_CHANNEL; + UARTD2.rxchnmap = TIVA_UART_UART1_RX_UDMA_MAPPING; + UARTD2.txchnmap = TIVA_UART_UART1_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART2 + uartObjectInit(&UARTD3); + UARTD2.uart = UART2_BASE; + UARTD2.dmarxnr = TIVA_UART_UART2_RX_UDMA_CHANNEL; + UARTD2.dmatxnr = TIVA_UART_UART2_TX_UDMA_CHANNEL; + UARTD2.rxchnmap = TIVA_UART_UART2_RX_UDMA_MAPPING; + UARTD2.txchnmap = TIVA_UART_UART2_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART3 + uartObjectInit(&UARTD4); + UARTD4.uart = UART3_BASE; + UARTD4.dmarxnr = TIVA_UART_UART3_RX_UDMA_CHANNEL; + UARTD4.dmatxnr = TIVA_UART_UART3_TX_UDMA_CHANNEL; + UARTD4.rxchnmap = TIVA_UART_UART3_RX_UDMA_MAPPING; + UARTD4.txchnmap = TIVA_UART_UART3_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART4 + uartObjectInit(&UARTD5); + UARTD5.uart = UART4_BASE; + UARTD5.dmarxnr = TIVA_UART_UART4_RX_UDMA_CHANNEL; + UARTD5.dmatxnr = TIVA_UART_UART4_TX_UDMA_CHANNEL; + UARTD5.rxchnmap = TIVA_UART_UART4_RX_UDMA_MAPPING; + UARTD5.txchnmap = TIVA_UART_UART4_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART5 + uartObjectInit(&UARTD6); + UARTD6.uart = UART5_BASE; + UARTD6.dmarxnr = TIVA_UART_UART5_RX_UDMA_CHANNEL; + UARTD6.dmatxnr = TIVA_UART_UART5_TX_UDMA_CHANNEL; + UARTD6.rxchnmap = TIVA_UART_UART5_RX_UDMA_MAPPING; + UARTD6.txchnmap = TIVA_UART_UART5_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART6 + uartObjectInit(&UARTD7); + UARTD7.uart = UART6_BASE; + UARTD7.dmarxnr = TIVA_UART_UART6_RX_UDMA_CHANNEL; + UARTD7.dmatxnr = TIVA_UART_UART6_TX_UDMA_CHANNEL; + UARTD7.rxchnmap = TIVA_UART_UART6_RX_UDMA_MAPPING; + UARTD7.txchnmap = TIVA_UART_UART6_TX_UDMA_MAPPING; +#endif +#if TIVA_UART_USE_UART7 + uartObjectInit(&UARTD8); + UARTD8.uart = UART7_BASE; + UARTD8.dmarxnr = TIVA_UART_UART7_RX_UDMA_CHANNEL; + UARTD8.dmatxnr = TIVA_UART_UART7_TX_UDMA_CHANNEL; + UARTD8.rxchnmap = TIVA_UART_UART7_RX_UDMA_MAPPING; + UARTD8.txchnmap = TIVA_UART_UART7_TX_UDMA_MAPPING; +#endif +} + +/** + * @brief Configures and activates the UART peripheral. + * + * @param[in] uartp pointer to the @p UARTDriver object + * + * @notapi + */ +void uart_lld_start(UARTDriver *uartp) { + + if (uartp->state == UART_STOP) { +#if TIVA_UART_USE_UART0 + if (&UARTD1 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 0); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 0))) + ; + + nvicEnableVector(TIVA_UART0_NUMBER, TIVA_UART_UART0_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART1 + if (&UARTD2 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 1); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 1))) + ; + + nvicEnableVector(TIVA_UART1_NUMBER, TIVA_UART_UART1_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART2 + if (&UARTD3 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 2); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 2))) + ; + + nvicEnableVector(TIVA_UART2_NUMBER, TIVA_UART_UART2_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART3 + if (&UARTD4 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 3); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 3))) + ; + + nvicEnableVector(TIVA_UART3_NUMBER, TIVA_UART_UART3_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART4 + if (&UARTD5 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 4); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 4))) + ; + + nvicEnableVector(TIVA_UART4_NUMBER, TIVA_UART_UART4_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART5 + if (&UARTD6 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 5); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 5))) + ; + + nvicEnableVector(TIVA_UART5_NUMBER, TIVA_UART_UART5_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART6 + if (&UARTD7 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 6); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 6))) + ; + + nvicEnableVector(TIVA_UART6_NUMBER, TIVA_UART_UART6_PRIORITY); + } +#endif +#if TIVA_UART_USE_UART7 + if (&UARTD8 == uartp) { + bool b; + b = udmaChannelAllocate(uartp->dmarxnr); + osalDbgAssert(!b, "channel already allocated"); + b = udmaChannelAllocate(uartp->dmatxnr); + osalDbgAssert(!b, "channel already allocated"); + + HWREG(SYSCTL_RCGCUART) |= (1 << 7); + + while (!(HWREG(SYSCTL_PRUART) & (1 << 7))) + ; + + nvicEnableVector(TIVA_UART7_NUMBER, TIVA_UART_UART7_PRIORITY); + } +#endif + + uartp->rxbuf = 0; + + HWREG(UDMA_CHMAP0 + (uartp->dmarxnr / 8) * 4) |= (uartp->rxchnmap << (uartp->dmarxnr % 8)); + HWREG(UDMA_CHMAP0 + (uartp->dmatxnr / 8) * 4) |= (uartp->txchnmap << (uartp->dmatxnr % 8)); + } + + uartp->rxstate = UART_RX_IDLE; + uartp->txstate = UART_TX_IDLE; + uart_init(uartp); +} + +/** + * @brief Deactivates the UART peripheral. + * + * @param[in] uartp pointer to the @p UARTDriver object + * + * @notapi + */ +void uart_lld_stop(UARTDriver *uartp) { + + if (uartp->state == UART_READY) { + uart_stop(uartp); + udmaChannelRelease(uartp->dmarxnr); + udmaChannelRelease(uartp->dmatxnr); + +#if TIVA_UART_USE_UART0 + if (&UARTD1 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 0); + return; + } +#endif +#if TIVA_UART_USE_UART1 + if (&UARTD2 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 1); + return; + } +#endif +#if TIVA_UART_USE_UART2 + if (&UARTD3 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 2); + return; + } +#endif +#if TIVA_UART_USE_UART3 + if (&UARTD4 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 3); + return; + } +#endif +#if TIVA_UART_USE_UART4 + if (&UARTD5 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 4); + return; + } +#endif +#if TIVA_UART_USE_UART5 + if (&UARTD6 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 5); + return; + } +#endif +#if TIVA_UART_USE_UART6 + if (&UARTD7 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 6); + return; + } +#endif +#if TIVA_UART_USE_UART7 + if (&UARTD8 == uartp) { + HWREG(SYSCTL_RCGCUART) &= ~(1 << 7); + return; + } +#endif + } +} + +/** + * @brief Starts a transmission on the UART peripheral. + * @note The buffers are organized as uint8_t arrays for data sizes below + * or equal to 8 bits else it is organized as uint16_t arrays. + * + * @param[in] uartp pointer to the @p UARTDriver object + * @param[in] n number of data frames to send + * @param[in] txbuf the pointer to the transmit buffer + * + * @notapi + */ +void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf) +{ + tiva_udma_table_entry_t *primary = udmaControlTable.primary; + + /* TODO: This assert should be moved to the dma helper driver */ + osalDbgAssert((uint32_t)txbuf >= SRAM_BASE, "txbuf should be in SRAM region."); + + dmaChannelDisable(uartp->dmatxnr); + + /* Configure for 8-bit transfers.*/ + primary[uartp->dmatxnr].srcendp = (volatile void *)txbuf+n-1; + primary[uartp->dmatxnr].dstendp = (void *)(uartp->uart + UART_O_DR); + primary[uartp->dmatxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_NONE | + UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_8 | + UDMA_CHCTL_ARBSIZE_4 | + UDMA_CHCTL_XFERSIZE(n) | + UDMA_CHCTL_XFERMODE_BASIC; + + dmaChannelSingleBurst(uartp->dmatxnr); + dmaChannelPrimary(uartp->dmatxnr); + dmaChannelPriorityDefault(uartp->dmatxnr); + dmaChannelEnableRequest(uartp->dmatxnr); + + /* Enable DMA channel, transfer starts immediately.*/ + dmaChannelEnable(uartp->dmatxnr); +} + +/** + * @brief Stops any ongoing transmission. + * @note Stopping a transmission also suppresses the transmission callbacks. + * + * @param[in] uartp pointer to the @p UARTDriver object + * + * @return The number of data frames not transmitted by the + * stopped transmit operation. + * + * @notapi + */ +size_t uart_lld_stop_send(UARTDriver *uartp) +{ + tiva_udma_table_entry_t *primary = udmaControlTable.primary; + uint16_t left; + + dmaChannelDisable(uartp->dmatxnr); + + left = ((primary[uartp->dmatxnr].chctl & UDMA_CHCTL_XFERSIZE_M) + 1) >> 4; + + return left; +} + +/** + * @brief Starts a receive operation on the UART peripheral. + * @note The buffers are organized as uint8_t arrays for data sizes below + * or equal to 8 bits else it is organized as uint16_t arrays. + * + * @param[in] uartp pointer to the @p UARTDriver object + * @param[in] n number of data frames to send + * @param[out] rxbuf the pointer to the receive buffer + * + * @notapi + */ +void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf) +{ + tiva_udma_table_entry_t *primary = udmaControlTable.primary; + + /* TODO: This assert should be moved to the dma helper driver */ + osalDbgAssert((uint32_t)rxbuf >= SRAM_BASE, "rxbuf should be in SRAM region."); + + dmaChannelDisable(uartp->dmarxnr); + + /* Configure for 8-bit transfers.*/ + primary[uartp->dmarxnr].srcendp = (void *)(uartp->uart + UART_O_DR); + primary[uartp->dmarxnr].dstendp = (volatile void *)rxbuf+n-1; + primary[uartp->dmarxnr].chctl = UDMA_CHCTL_DSTSIZE_8 | UDMA_CHCTL_DSTINC_8 | + UDMA_CHCTL_SRCSIZE_8 | UDMA_CHCTL_SRCINC_NONE | + UDMA_CHCTL_ARBSIZE_4 | + UDMA_CHCTL_XFERSIZE(n) | + UDMA_CHCTL_XFERMODE_BASIC; + + dmaChannelSingleBurst(uartp->dmarxnr); + dmaChannelPrimary(uartp->dmarxnr); + dmaChannelPriorityDefault(uartp->dmarxnr); + dmaChannelEnableRequest(uartp->dmarxnr); + + /* Enable DMA channel, transfer starts immediately.*/ + dmaChannelEnable(uartp->dmarxnr); +} + +/** + * @brief Stops any ongoing receive operation. + * @note Stopping a receive operation also suppresses the receive callbacks. + * + * @param[in] uartp pointer to the @p UARTDriver object + * + * @return The number of data frames not received by the + * stopped receive operation. + * + * @notapi + */ +size_t uart_lld_stop_receive(UARTDriver *uartp) +{ + tiva_udma_table_entry_t *primary = udmaControlTable.primary; + uint16_t left; + + dmaChannelDisable(uartp->dmatxnr); + + left = ((primary[uartp->dmatxnr].chctl & UDMA_CHCTL_XFERSIZE_M) + 1) >> 4; + + uart_enter_rx_idle_loop(uartp); + + return left; +} + +#endif /* HAL_USE_UART */ + +/** @} */ diff --git a/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.h b/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.h new file mode 100644 index 0000000..1dc743b --- /dev/null +++ b/os/hal/ports/TIVA/LLD/UART/hal_uart_lld.h @@ -0,0 +1,471 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file UART/hal_uart_lld.h + * @brief Tiva low level UART driver header. + * + * @addtogroup UART + * @{ + */ + +#ifndef HAL_UART_LLD_H +#define HAL_UART_LLD_H + +#if HAL_USE_UART || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @name Configuration options + * @{ + */ +/** + * @brief UART driver on UART0 enable switch. + * @details If set to @p TRUE the support for UART0 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART0) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART0 FALSE +#endif + +/** + * @brief UART driver on UART1 enable switch. + * @details If set to @p TRUE the support for UART1 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART1) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART1 FALSE +#endif + +/** + * @brief UART driver on UART2 enable switch. + * @details If set to @p TRUE the support for UART2 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART2) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART2 FALSE +#endif + +/** + * @brief UART driver on UART3 enable switch. + * @details If set to @p TRUE the support for UART3 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART3) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART3 FALSE +#endif + +/** + * @brief UART driver on UART4 enable switch. + * @details If set to @p TRUE the support for UART4 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART4) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART4 FALSE +#endif + +/** + * @brief UART driver on UART5 enable switch. + * @details If set to @p TRUE the support for UART5 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART5) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART5 FALSE +#endif + +/** + * @brief UART driver on UART6 enable switch. + * @details If set to @p TRUE the support for UART6 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART6) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART6 FALSE +#endif + +/** + * @brief UART driver on UART7 enable switch. + * @details If set to @p TRUE the support for UART7 is included. + * @note The default is @p FALSE. + */ +#if !defined(TIVA_UART_USE_UART7) || defined(__DOXYGEN__) +#define TIVA_UART_USE_UART7 FALSE +#endif + +/** + * @brief UART0 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART0_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART0_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART1 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART1_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART1_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART2 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART2_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART2_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART3 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART3_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART3_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART4 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART4_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART4_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART5 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART5_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART5_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART6 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART6_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART6_IRQ_PRIORITY 5 +#endif + +/** + * @brief UART7 interrupt priority level setting. + */ +#if !defined(TIVA_UART_UART7_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define TIVA_UART_UART7_IRQ_PRIORITY 5 +#endif +/** @} */ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +#if TIVA_UART_USE_UART0 && !TIVA_HAS_UART0 +#error "UART0 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART1 && !TIVA_HAS_UART1 +#error "UART1 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART2 && !TIVA_HAS_UART2 +#error "UART2 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART3 && !TIVA_HAS_UART3 +#error "UART3 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART4 && !TIVA_HAS_UART4 +#error "UART4 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART5 && !TIVA_HAS_UART5 +#error "UART5 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART6 && !TIVA_HAS_UART6 +#error "UART6 not present in the selected device" +#endif + +#if TIVA_UART_USE_UART7 && !TIVA_HAS_UART7 +#error "UART7 not present in the selected device" +#endif + +#if !TIVA_UART_USE_UART0 && !TIVA_UART_USE_UART1 && !TIVA_UART_USE_UART2 && \ + !TIVA_UART_USE_UART3 && !TIVA_UART_USE_UART4 && !TIVA_UART_USE_UART5 && \ + !TIVA_UART_USE_UART6 && !TIVA_UART_USE_UART7 +#error "UART driver activated but no UART peripheral assigned" +#endif + +#if TIVA_UART_USE_UART0 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART0_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART0" +#endif + +#if TIVA_UART_USE_UART1 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART1_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART1" +#endif + +#if TIVA_UART_USE_UART2 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART2_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART2" +#endif + +#if TIVA_UART_USE_UART3 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART3_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART3" +#endif + +#if TIVA_UART_USE_UART4 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART4_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART4" +#endif + +#if TIVA_UART_USE_UART5 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART5_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART5" +#endif + +#if TIVA_UART_USE_UART6 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART6_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART6" +#endif + +#if TIVA_UART_USE_UART7 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_UART_UART7_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to UART7" +#endif + +#if !defined(TIVA_UDMA_REQUIRED) +#define TIVA_UDMA_REQUIRED +#endif + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/** + * @brief UART driver condition flags type. + */ +typedef uint32_t uartflags_t; + +/** + * @brief Structure representing an UART driver. + */ +typedef struct UARTDriver UARTDriver; + +/** + * @brief Generic UART notification callback type. + * + * @param[in] uartp pointer to the @p UARTDriver object + */ +typedef void (*uartcb_t)(UARTDriver *uartp); + +/** + * @brief Character received UART notification callback type. + * + * @param[in] uartp pointer to the @p UARTDriver object + * @param[in] c received character + */ +typedef void (*uartccb_t)(UARTDriver *uartp, uint16_t c); + +/** + * @brief Receive error UART notification callback type. + * + * @param[in] uartp pointer to the @p UARTDriver object + * @param[in] e receive error mask + */ +typedef void (*uartecb_t)(UARTDriver *uartp, uartflags_t e); + +/** + * @brief Driver configuration structure. + * @note It could be empty on some architectures. + */ +typedef struct { + /** + * @brief End of transmission buffer callback. + */ + uartcb_t txend1_cb; + /** + * @brief Physical end of transmission callback. + */ + uartcb_t txend2_cb; + /** + * @brief Receive buffer filled callback. + */ + uartcb_t rxend_cb; + /** + * @brief Character received while out if the @p UART_RECEIVE state. + */ + uartccb_t rxchar_cb; + /** + * @brief Receive error callback. + */ + uartecb_t rxerr_cb; + /* End of the mandatory fields.*/ + /** + * @brief Bit rate. + */ + uint32_t speed; + /* End of the mandatory fields. */ + /** + * @brief Initialization value for the CTL register. + */ + uint16_t ctl; + /** + * @brief Initialization value for the LCRH register. + */ + uint8_t lcrh; + /** + * @brief Initialization value for the IFLS register. + */ + uint8_t ifls; + /** + * @brief Initialization value for the CC register. + */ + uint8_t cc; +} UARTConfig; + +/** + * @brief Structure representing an UART driver. + */ +struct UARTDriver { + /** + * @brief Driver state. + */ + uartstate_t state; + /** + * @brief Transmitter state. + */ + uarttxstate_t txstate; + /** + * @brief Receiver state. + */ + uartrxstate_t rxstate; + /** + * @brief Current configuration data. + */ + const UARTConfig *config; +#if (UART_USE_WAIT == TRUE) || defined(__DOXYGEN__) + /** + * @brief Synchronization flag for transmit operations. + */ + bool early; + /** + * @brief Waiting thread on RX. + */ + thread_reference_t threadrx; + /** + * @brief Waiting thread on TX. + */ + thread_reference_t threadtx; +#endif /* UART_USE_WAIT */ +#if (UART_USE_MUTUAL_EXCLUSION == TRUE) || defined(__DOXYGEN__) + /** + * @brief Mutex protecting the peripheral. + */ + mutex_t mutex; +#endif /* UART_USE_MUTUAL_EXCLUSION */ +#if defined(UART_DRIVER_EXT_FIELDS) + UART_DRIVER_EXT_FIELDS +#endif + /* End of the mandatory fields.*/ + /** + * @brief Pointer to the UART registers block. + */ + uint32_t uart; + /** + * @brief Receive DMA channel number. + */ + uint8_t dmarxnr; + /** + * @brief Transmit DMA channel number. + */ + uint8_t dmatxnr; + /** + * @brief Receive DMA channel map. + */ + uint8_t rxchnmap; + /** + * @brief Transmit DMA channel map. + */ + uint8_t txchnmap; + /** + * @brief Default receive buffer while into @p UART_RX_IDLE state. + */ + volatile uint16_t rxbuf; +}; + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#if TIVA_UART_USE_UART0 && !defined(__DOXYGEN__) +extern UARTDriver UARTD1; +#endif + +#if TIVA_UART_USE_UART1 && !defined(__DOXYGEN__) +extern UARTDriver UARTD2; +#endif + +#if TIVA_UART_USE_UART2 && !defined(__DOXYGEN__) +extern UARTDriver UARTD3; +#endif + +#if TIVA_UART_USE_UART3 && !defined(__DOXYGEN__) +extern UARTDriver UARTD4; +#endif + +#if TIVA_UART_USE_UART4 && !defined(__DOXYGEN__) +extern UARTDriver UARTD5; +#endif + +#if TIVA_UART_USE_UART5 && !defined(__DOXYGEN__) +extern UARTDriver UARTD6; +#endif + +#if TIVA_UART_USE_UART6 && !defined(__DOXYGEN__) +extern UARTDriver UARTD7; +#endif + +#if TIVA_UART_USE_UART7 && !defined(__DOXYGEN__) +extern UARTDriver UARTD8; +#endif + +#ifdef __cplusplus +extern "C" { +#endif + void uart_lld_init(void); + void uart_lld_start(UARTDriver *uartp); + void uart_lld_stop(UARTDriver *uartp); + void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf); + size_t uart_lld_stop_send(UARTDriver *uartp); + void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf); + size_t uart_lld_stop_receive(UARTDriver *uartp); +#ifdef __cplusplus +} +#endif + +#endif /* HAL_USE_UART */ + +#endif /* HAL_UART_LLD_H */ + +/** @} */ diff --git a/os/hal/ports/TIVA/LLD/WDT/driver.mk b/os/hal/ports/TIVA/LLD/WDT/driver.mk new file mode 100644 index 0000000..867d0e6 --- /dev/null +++ b/os/hal/ports/TIVA/LLD/WDT/driver.mk @@ -0,0 +1,9 @@ +ifeq ($(USE_SMART_BUILD),yes) +ifneq ($(findstring HAL_USE_WDG TRUE,$(HALCONF)),) +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/WDT/hal_wdg_lld.c +endif +else +PLATFORMSRC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/WDT/hal_wdg_lld.c +endif + +PLATFORMINC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/WDT diff --git a/os/hal/ports/TIVA/LLD/hal_wdg_lld.c b/os/hal/ports/TIVA/LLD/WDT/hal_wdg_lld.c index 38dcef0..705fce6 100644 --- a/os/hal/ports/TIVA/LLD/hal_wdg_lld.c +++ b/os/hal/ports/TIVA/LLD/WDT/hal_wdg_lld.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -16,7 +16,7 @@ /** - * @file TIVA/wdg_lld.c + * @file WDT/hal_wdg_lld.c * @brief WDG Driver subsystem low level driver source. * * @addtogroup WDG @@ -60,14 +60,14 @@ static void serve_interrupt(WDGDriver *wdgp) { uint32_t mis; - mis = wdgp->wdt->MIS; + mis = HWREG(wdgp->wdt + WDT_O_MIS); - if (mis & MIS_WDTMIS) { + if (mis & WDT_MIS_WDTMIS) { /* Invoke callback, if any */ if (wdgp->config->callback) { if (wdgp->config->callback(wdgp)) { /* Clear interrupt */ - wdgp->wdt->ICR = 0; + HWREG(wdgp->wdt + WDT_O_ICR) = 0; wdgTivaSyncWrite(wdgp); } } @@ -113,12 +113,12 @@ void wdg_lld_init(void) { #if TIVA_WDG_USE_WDT0 WDGD1.state = WDG_STOP; - WDGD1.wdt = WDT0; + WDGD1.wdt = WATCHDOG0_BASE; #endif /* TIVA_WDG_USE_WDT0 */ #if TIVA_WDG_USE_WDT1 WDGD2.state = WDG_STOP; - WDGD2.wdt = WDT1; + WDGD2.wdt = WATCHDOG1_BASE; #endif /* TIVA_WDG_USE_WDT1 */ /* The shared vector is initialized on driver initialization and never @@ -137,32 +137,32 @@ void wdg_lld_start(WDGDriver *wdgp) { #if TIVA_WDG_USE_WDT0 if (&WDGD1 == wdgp) { - SYSCTL->RCGCWD |= (1 << 0); + HWREG(SYSCTL_RCGCWD) |= (1 << 0); - while (!(SYSCTL->PRWD & (1 << 0))) + while (!(HWREG(SYSCTL_PRWD) & (1 << 0))) ; } #endif /* TIVA_WDG_USE_WDT0 */ #if TIVA_WDG_USE_WDT1 if (&WDGD2 == wdgp) { - SYSCTL->RCGCWD |= (1 << 1); + HWREG(SYSCTL_RCGCWD) |= (1 << 1); - while (!(SYSCTL->PRWD & (1 << 1))) + while (!(HWREG(SYSCTL_PRWD) & (1 << 1))) ; } #endif /* TIVA_WDG_USE_WDT1 */ - wdgp->wdt->LOAD = wdgp->config->load; + HWREG(wdgp->wdt + WDT_O_LOAD) = wdgp->config->load; wdgTivaSyncWrite(wdgp); - wdgp->wdt->TEST = wdgp->config->test; + HWREG(wdgp->wdt + WDT_O_TEST) = wdgp->config->test; wdgTivaSyncWrite(wdgp); - wdgp->wdt->CTL |= CTL_RESEN; + HWREG(wdgp->wdt + WDT_O_CTL) |= WDT_CTL_RESEN; wdgTivaSyncWrite(wdgp); - wdgp->wdt->CTL |= CTL_INTEN; + HWREG(wdgp->wdt + WDT_O_CTL) |= WDT_CTL_INTEN; wdgTivaSyncWrite(wdgp); } @@ -177,15 +177,15 @@ void wdg_lld_stop(WDGDriver *wdgp) { #if TIVA_WDG_USE_WDT0 if (&WDGD1 == wdgp) { - SYSCTL->SRWD |= (1 << 0); - SYSCTL->SRWD &= ~(1 << 0); + HWREG(SYSCTL_SRWD) |= (1 << 0); + HWREG(SYSCTL_SRWD) &= ~(1 << 0); } #endif /* TIVA_WDG_USE_WDT0 */ #if TIVA_WDG_USE_WDT1 if (&WDGD2 == wdgp) { - SYSCTL->SRWD |= (1 << 1); - SYSCTL->SRWD &= ~(1 << 1); + HWREG(SYSCTL_SRWD) |= (1 << 1); + HWREG(SYSCTL_SRWD) &= ~(1 << 1); } #endif /* TIVA_WDG_USE_WDT1 */ } @@ -219,7 +219,7 @@ void wdg_lld_reset(WDGDriver *wdgp) #endif /* defined(TM4C123_USE_REVISION_6_FIX) || defined(TM4C123_USE_REVISION_7_FIX) */ - wdgp->wdt->LOAD = wdgp->config->load; + HWREG(wdgp->wdt + WDT_O_LOAD) = wdgp->config->load; wdgTivaSyncWrite(wdgp); } @@ -234,7 +234,7 @@ void wdg_lld_reset(WDGDriver *wdgp) void wdgTivaSyncWrite(WDGDriver *wdgp) { if (&WDGD2 == wdgp) { - while (!(wdgp->wdt->CTL & CTL_WRC)) { + while (!(HWREG(wdgp->wdt + WDT_O_CTL) & CTL_WRC)) { ; } } diff --git a/os/hal/ports/TIVA/LLD/hal_wdg_lld.h b/os/hal/ports/TIVA/LLD/WDT/hal_wdg_lld.h index f88fa26..0f694c5 100644 --- a/os/hal/ports/TIVA/LLD/hal_wdg_lld.h +++ b/os/hal/ports/TIVA/LLD/WDT/hal_wdg_lld.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -16,7 +16,7 @@ /** - * @file TIVA/wdg_lld.h + * @file WDT/hal_wdg_lld.h * @brief WDG Driver subsystem low level driver header. * * @addtogroup WDG @@ -32,23 +32,6 @@ /* Driver constants. */ /*===========================================================================*/ -#define LOCK_UNLOCK 0x1ACCE551U -#define LOCK_LOCK 0x00000000U - -#define LOCK_IS_UNLOCKED 0U -#define LOCK_IS_LOCKED 1U - -#define TEST_STALL (1 << 8) - -#define MIS_WDTMIS (1 << 0) -#define RIS_WDTRIS (1 << 0) -#define ICR_WDTICR (1 << 0) - -#define CTL_INTEN (1 << 0) -#define CTL_RESEN (1 << 1) -#define CTL_INTTYPE (1 << 2) -#define CTL_WRC (1 << 31) - /*===========================================================================*/ /* Driver pre-compile time settings. */ /*===========================================================================*/ @@ -146,7 +129,7 @@ struct WDGDriver /** * @brief Pointer to the WDT registers block. */ - WDT_TypeDef *wdt; + uint32_t wdt; }; /*===========================================================================*/ diff --git a/os/hal/ports/TIVA/LLD/hal_ext_lld.c b/os/hal/ports/TIVA/LLD/hal_ext_lld.c deleted file mode 100644 index efe6421..0000000 --- a/os/hal/ports/TIVA/LLD/hal_ext_lld.c +++ /dev/null @@ -1,981 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file Tiva/ext_lld.c - * @brief Tiva EXT subsystem low level driver source. - * - * @addtogroup EXT - * @{ - */ - -#include "hal.h" - -#if HAL_USE_EXT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -/** - * @brief Generic interrupt serving code for multiple pins per interrupt - * handler. - */ -#define ext_lld_serve_port_interrupt(gpiop, start) \ - do { \ - uint32_t mis = gpiop->MIS; \ - \ - gpiop->ICR = mis; \ - \ - if (mis & (1 << 0)) { \ - EXTD1.config->channels[start + 0].cb(&EXTD1, start + 0); \ - } \ - if (mis & (1 << 1)) { \ - EXTD1.config->channels[start + 1].cb(&EXTD1, start + 1); \ - } \ - if (mis & (1 << 2)) { \ - EXTD1.config->channels[start + 2].cb(&EXTD1, start + 2); \ - } \ - if (mis & (1 << 3)) { \ - EXTD1.config->channels[start + 3].cb(&EXTD1, start + 3); \ - } \ - if (mis & (1 << 4)) { \ - EXTD1.config->channels[start + 4].cb(&EXTD1, start + 4); \ - } \ - if (mis & (1 << 5)) { \ - EXTD1.config->channels[start + 5].cb(&EXTD1, start + 5); \ - } \ - if (mis & (1 << 6)) { \ - EXTD1.config->channels[start + 6].cb(&EXTD1, start + 6); \ - } \ - if (mis & (1 << 7)) { \ - EXTD1.config->channels[start + 7].cb(&EXTD1, start + 7); \ - } \ - } while (0); - -/** - * @brief Generic interrupt serving code for single pin per interrupt - * handler. - */ -#define ext_lld_serve_pin_interrupt(gpiop, start, pin) \ - do { \ - gpiop->ICR = (1 << pin); \ - EXTD1.config->channels[start].cb(&EXTD1, start); \ - } while (0); - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/** - * @brief EXTD1 driver identifier. - */ -EXTDriver EXTD1; - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -const ioportid_t gpio[] = -{ -#if TIVA_HAS_GPIOA - GPIOA, -#endif -#if TIVA_HAS_GPIOB - GPIOB, -#endif -#if TIVA_HAS_GPIOC - GPIOC, -#endif -#if TIVA_HAS_GPIOD - GPIOD, -#endif -#if TIVA_HAS_GPIOE - GPIOE, -#endif -#if TIVA_HAS_GPIOF - GPIOF, -#endif -#if TIVA_HAS_GPIOG - GPIOG, -#endif -#if TIVA_HAS_GPIOH - GPIOH, -#endif -#if TIVA_HAS_GPIOJ - GPIOJ, -#endif -#if TIVA_HAS_GPIOK - GPIOK, -#endif -#if TIVA_HAS_GPIOL - GPIOL, -#endif -#if TIVA_HAS_GPIOM - GPIOM, -#endif -#if TIVA_HAS_GPION - GPION, -#endif -#if TIVA_HAS_GPIOP - GPIOP, -#endif -#if TIVA_HAS_GPIOQ - GPIOQ, -#endif -#if TIVA_HAS_GPIOR - GPIOR, -#endif -#if TIVA_HAS_GPIOS - GPIOS, -#endif -#if TIVA_HAS_GPIOT - GPIOT, -#endif -}; - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Enables GPIO IRQ sources. - * - * @notapi - */ -static void ext_lld_irq_enable(void) -{ -#if TIVA_HAS_GPIOA - nvicEnableVector(TIVA_GPIOA_NUMBER, TIVA_EXT_GPIOA_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOB - nvicEnableVector(TIVA_GPIOB_NUMBER, TIVA_EXT_GPIOB_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOC - nvicEnableVector(TIVA_GPIOC_NUMBER, TIVA_EXT_GPIOC_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOD - nvicEnableVector(TIVA_GPIOD_NUMBER, TIVA_EXT_GPIOD_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOE - nvicEnableVector(TIVA_GPIOE_NUMBER, TIVA_EXT_GPIOE_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOF - nvicEnableVector(TIVA_GPIOF_NUMBER, TIVA_EXT_GPIOF_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOG - nvicEnableVector(TIVA_GPIOG_NUMBER, TIVA_EXT_GPIOG_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOH - nvicEnableVector(TIVA_GPIOH_NUMBER, TIVA_EXT_GPIOH_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOJ - nvicEnableVector(TIVA_GPIOJ_NUMBER, TIVA_EXT_GPIOJ_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOK - nvicEnableVector(TIVA_GPIOK_NUMBER, TIVA_EXT_GPIOK_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOL - nvicEnableVector(TIVA_GPIOL_NUMBER, TIVA_EXT_GPIOL_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOM - nvicEnableVector(TIVA_GPIOM_NUMBER, TIVA_EXT_GPIOM_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPION - nvicEnableVector(TIVA_GPION_NUMBER, TIVA_EXT_GPION_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOP - nvicEnableVector(TIVA_GPIOP0_NUMBER, TIVA_EXT_GPIOP0_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP1_NUMBER, TIVA_EXT_GPIOP1_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP2_NUMBER, TIVA_EXT_GPIOP2_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP3_NUMBER, TIVA_EXT_GPIOP3_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP4_NUMBER, TIVA_EXT_GPIOP4_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP5_NUMBER, TIVA_EXT_GPIOP5_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP6_NUMBER, TIVA_EXT_GPIOP6_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOP7_NUMBER, TIVA_EXT_GPIOP7_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOQ - nvicEnableVector(TIVA_GPIOQ0_NUMBER, TIVA_EXT_GPIOQ0_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ1_NUMBER, TIVA_EXT_GPIOQ1_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ2_NUMBER, TIVA_EXT_GPIOQ2_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ3_NUMBER, TIVA_EXT_GPIOQ3_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ4_NUMBER, TIVA_EXT_GPIOQ4_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ5_NUMBER, TIVA_EXT_GPIOQ5_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ6_NUMBER, TIVA_EXT_GPIOQ6_IRQ_PRIORITY); - nvicEnableVector(TIVA_GPIOQ7_NUMBER, TIVA_EXT_GPIOQ7_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOR - nvicEnableVector(TIVA_GPIOR_NUMBER, TIVA_EXT_GPIOR_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOS - nvicEnableVector(TIVA_GPIOS_NUMBER, TIVA_EXT_GPIOS_IRQ_PRIORITY); -#endif -#if TIVA_HAS_GPIOT - nvicEnableVector(TIVA_GPIOT_NUMBER, TIVA_EXT_GPIOT_IRQ_PRIORITY); -#endif -} - -/** - * @brief Disables GPIO IRQ sources. - * - * @notapi - */ -static void ext_lld_irq_disable(void) -{ -#if TIVA_HAS_GPIOA - nvicDisableVector(TIVA_GPIOA_NUMBER); -#endif -#if TIVA_HAS_GPIOB - nvicDisableVector(TIVA_GPIOB_NUMBER); -#endif -#if TIVA_HAS_GPIOC - nvicDisableVector(TIVA_GPIOC_NUMBER); -#endif -#if TIVA_HAS_GPIOD - nvicDisableVector(TIVA_GPIOD_NUMBER); -#endif -#if TIVA_HAS_GPIOE - nvicDisableVector(TIVA_GPIOE_NUMBER); -#endif -#if TIVA_HAS_GPIOF - nvicDisableVector(TIVA_GPIOF_NUMBER); -#endif -#if TIVA_HAS_GPIOG - nvicDisableVector(TIVA_GPIOG_NUMBER); -#endif -#if TIVA_HAS_GPIOH - nvicDisableVector(TIVA_GPIOH_NUMBER); -#endif -#if TIVA_HAS_GPIOJ - nvicDisableVector(TIVA_GPIOJ_NUMBER); -#endif -#if TIVA_HAS_GPIOK - nvicDisableVector(TIVA_GPIOK_NUMBER); -#endif -#if TIVA_HAS_GPIOL - nvicDisableVector(TIVA_GPIOL_NUMBER); -#endif -#if TIVA_HAS_GPIOM - nvicDisableVector(TIVA_GPIOM_NUMBER); -#endif -#if TIVA_HAS_GPION - nvicDisableVector(TIVA_GPION_NUMBER); -#endif -#if TIVA_HAS_GPIOP - nvicDisableVector(TIVA_GPIOP0_NUMBER); - nvicDisableVector(TIVA_GPIOP1_NUMBER); - nvicDisableVector(TIVA_GPIOP2_NUMBER); - nvicDisableVector(TIVA_GPIOP3_NUMBER); - nvicDisableVector(TIVA_GPIOP4_NUMBER); - nvicDisableVector(TIVA_GPIOP5_NUMBER); - nvicDisableVector(TIVA_GPIOP6_NUMBER); - nvicDisableVector(TIVA_GPIOP7_NUMBER); -#endif -#if TIVA_HAS_GPIOQ - nvicDisableVector(TIVA_GPIOQ0_NUMBER); - nvicDisableVector(TIVA_GPIOQ1_NUMBER); - nvicDisableVector(TIVA_GPIOQ2_NUMBER); - nvicDisableVector(TIVA_GPIOQ3_NUMBER); - nvicDisableVector(TIVA_GPIOQ4_NUMBER); - nvicDisableVector(TIVA_GPIOQ5_NUMBER); - nvicDisableVector(TIVA_GPIOQ6_NUMBER); - nvicDisableVector(TIVA_GPIOQ7_NUMBER); -#endif -#if TIVA_HAS_GPIOR - nvicDisableVector(TIVA_GPIOR_NUMBER); -#endif -#if TIVA_HAS_GPIOS - nvicDisableVector(TIVA_GPIOS_NUMBER); -#endif -#if TIVA_HAS_GPIOT - nvicDisableVector(TIVA_GPIOT_NUMBER); -#endif -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -#if TIVA_HAS_GPIOA || defined(__DOXYGEN__) -/** - * @brief GPIOA interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOA_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(GPIOA, 0); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOB || defined(__DOXYGEN__) -/** - * @brief GPIOB interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOB_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(GPIOB, 8); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOC || defined(__DOXYGEN__) -/** - * @brief GPIOC interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOC_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(GPIOC, 16); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOD || defined(__DOXYGEN__) -/** - * @brief GPIOD interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOD_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(GPIOD, 24); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOE || defined(__DOXYGEN__) -/** - * @brief GPIOE interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOE_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(GPIOE, 32); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOF || defined(__DOXYGEN__) -/** - * @brief GPIOF interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOF_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(GPIOF, 40); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) -/** - * @brief GPIOG interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOG_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOG, 48); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) -/** - * @brief GPIOH interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOH_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOH, 56); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) -/** - * @brief GPIOJ interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOJ_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOJ, 64); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) -/** - * @brief GPIOK interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOK_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOK, 72); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) -/** - * @brief GPIOL interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOL_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOL, 80); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) -/** - * @brief GPIOM interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOM_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOM, 88); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPION || defined(__DOXYGEN__) -/** - * @brief GPION interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPION_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPION, 96); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) -/** - * @brief GPIOP0 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP0_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 104, 0); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP1_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 105, 1); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP2 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP2_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 106, 2); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP3 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP3_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 107, 3); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP4 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP4_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 108, 4); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP5 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP5_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 109, 5); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP6 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP6_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 110, 6); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOP7 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOP7_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOP, 111, 7); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) -/** - * @brief GPIOQ0 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ0_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 112, 0); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ1 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ1_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 113, 1); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ2 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ2_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 114, 2); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ3 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ3_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 115, 3); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ4 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ4_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 116, 4); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ5 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ5_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 117, 5); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ6 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ6_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 118, 6); - - OSAL_IRQ_EPILOGUE(); -} - -/** - * @brief GPIOQ7 interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOQ7_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_pin_interrupt(&GPIOQ, 119, 7); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) -/** - * @brief GPIOR interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOR_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOR, 120); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) -/** - * @brief GPIOS interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOS_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOS, 128); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) -/** - * @brief GPIOT interrupt handler. - * - * @isr - */ -OSAL_IRQ_HANDLER(TIVA_GPIOT_HANDLER) -{ - OSAL_IRQ_PROLOGUE(); - - ext_lld_serve_port_interrupt(&GPIOT, 132); - - OSAL_IRQ_EPILOGUE(); -} -#endif - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Low level EXT driver initialization. - * - * @notapi - */ -void ext_lld_init(void) -{ - extObjectInit(&EXTD1); -} - -/** - * @brief Configures and activates the EXT peripheral. - * - * @param[in] extp pointer to the @p EXTDriver object - * - * @notapi - */ -void ext_lld_start(EXTDriver *extp) -{ - uint8_t i; - - if (extp->state == EXT_STOP) { - ext_lld_irq_enable(); - } - - /* Configuration of automatic channels.*/ - for (i = 0; i < EXT_MAX_CHANNELS; i++) { - if (extp->config->channels[i].mode & EXT_CH_MODE_AUTOSTART) { - ext_lld_channel_enable(extp, i); - } - else { - ext_lld_channel_disable(extp, i); - } - } -} - -/** - * @brief Deactivates the EXT peripheral. - * - * @param[in] extp pointer to the @p EXTDriver object - * - * @notapi - */ -void ext_lld_stop(EXTDriver *extp) -{ - if (extp->state == EXT_ACTIVE) { - ext_lld_irq_disable(); - } - -#if TIVA_HAS_GPIOA - GPIOA->IM = 0; -#endif -#if TIVA_HAS_GPIOB - GPIOB->IM = 0; -#endif -#if TIVA_HAS_GPIOC - GPIOC->IM = 0; -#endif -#if TIVA_HAS_GPIOD - GPIOD->IM = 0; -#endif -#if TIVA_HAS_GPIOE - GPIOE->IM = 0; -#endif -#if TIVA_HAS_GPIOF - GPIOF->IM = 0; -#endif -#if TIVA_HAS_GPIOG - GPIOG->IM = 0; -#endif -#if TIVA_HAS_GPIOH - GPIOH->IM = 0; -#endif -#if TIVA_HAS_GPIOJ - GPIOJ->IM = 0; -#endif -#if TIVA_HAS_GPIOK - GPIOK->IM = 0; -#endif -#if TIVA_HAS_GPIOL - GPIOL->IM = 0; -#endif -#if TIVA_HAS_GPIOM - GPIOM->IM = 0; -#endif -#if TIVA_HAS_GPION - GPION->IM = 0; -#endif -#if TIVA_HAS_GPIOP - GPIOP->IM = 0; -#endif -#if TIVA_HAS_GPIOQ - GPIOQ->IM = 0; -#endif -#if TIVA_HAS_GPIOR - GPIOR->IM = 0; -#endif -#if TIVA_HAS_GPIOS - GPIOS->IM = 0; -#endif -#if TIVA_HAS_GPIOT - GPIOT->IM = 0; -#endif -} - -/** - * @brief Enables an EXT channel. - * - * @param[in] extp pointer to the @p EXTDriver object - * @param[in] channel channel to be enabled - * - * @notapi - */ -void ext_lld_channel_enable(EXTDriver *extp, expchannel_t channel) -{ - GPIO_TypeDef *gpiop; - uint8_t pin; - uint32_t im; - - pin = channel & 0x07; - gpiop = gpio[channel >> 3]; - - /* Disable interrupts */ - im = gpiop->IM; - gpiop->IM = 0; - - /* Configure pin to be edge-sensitive.*/ - gpiop->IS &= ~(1 << pin); - - /* Programming edge registers.*/ - if ((extp->config->channels[channel].mode & EXT_CH_MODE_EDGES_MASK) == - EXT_CH_MODE_BOTH_EDGES) { - gpiop->IBE |= (1 << pin); - } - else if ((extp->config->channels[channel].mode & EXT_CH_MODE_EDGES_MASK) == - EXT_CH_MODE_FALLING_EDGE) { - gpiop->IBE &= ~(1 << pin); - gpiop->IEV &= ~(1 << pin); - } - else if ((extp->config->channels[channel].mode & EXT_CH_MODE_EDGES_MASK) == - EXT_CH_MODE_RISING_EDGE) { - gpiop->IBE &= ~(1 << pin); - gpiop->IEV |= (1 << pin); - } - - /* Programming interrupt and event registers.*/ - if ((extp->config->channels[channel].cb != NULL) && - ((extp->config->channels[channel].mode & EXT_CH_MODE_EDGES_MASK) != - EXT_CH_MODE_DISABLED)) { - im |= (1 << pin); - } - else { - im &= ~(1 << pin); - } - - /* Restore interrupts */ - gpiop->IM = im; -} - -/** - * @brief Disables an EXT channel. - * - * @param[in] extp pointer to the @p EXTDriver object - * @param[in] channel channel to be disabled - * - * @notapi - */ -void ext_lld_channel_disable(EXTDriver *extp, expchannel_t channel) -{ - (void)extp; - GPIO_TypeDef *gpiop; - uint8_t pin; - - pin = channel & 0x07; - gpiop = gpio[channel >> 3]; - - gpiop->IM &= ~(1 << pin); -} - -#endif /* HAL_USE_EXT */ - -/** @} */ diff --git a/os/hal/ports/TIVA/LLD/hal_ext_lld.h b/os/hal/ports/TIVA/LLD/hal_ext_lld.h deleted file mode 100644 index 08accb2..0000000 --- a/os/hal/ports/TIVA/LLD/hal_ext_lld.h +++ /dev/null @@ -1,523 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file Tiva/ext_lld.h - * @brief Tiva EXT subsystem low level driver header. - * - * @addtogroup EXT - * @{ - */ - -#ifndef HAL_EXT_LLD_H -#define HAL_EXT_LLD_H - -#if HAL_USE_EXT || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -/** - * @brief Number of EXT per port. - */ -#define EXT_MAX_CHANNELS TIVA_GPIO_PINS - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @name Configuration options - * @{ - */ -/** - * @brief GPIOA interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOA_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOA_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOB interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOB_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOB_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOC interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOC_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOC_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOD interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOD_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOD_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOE interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOE_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOE_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOF interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOF_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOF_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOG interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOG_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOG_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOH interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOH_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOH_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOJ interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOJ_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOJ_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOK interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOK_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOK_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOL interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOL_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOL_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOM interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOM_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOM_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPION interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPION_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPION_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP0 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP0_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP0_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP1 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP1_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP2 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP2_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP3 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP3_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP3_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP4 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP4_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP4_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP5 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP5_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP5_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP6 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP6_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP6_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOP7 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOP7_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOP7_IRQ_PRIORITY 3 -#endif -/** @} */ - -/** - * @brief GPIOQ0 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ0_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ0_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ1 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ1_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ1_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ2 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ2_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ2_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ3 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ3_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ3_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ4 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ4_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ4_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ5 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ5_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ5_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ6 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ6_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ6_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOQ7 interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOQ7_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOQ7_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOR interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOR_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOR_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOS interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOS_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOS_IRQ_PRIORITY 3 -#endif - -/** - * @brief GPIOT interrupt priority level setting. - */ -#if !defined(TIVA_EXT_GPIOT_IRQ_PRIORITY) || defined(__DOXYGEN__) -#define TIVA_EXT_GPIOT_IRQ_PRIORITY 3 -#endif -/** @} */ - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if TIVA_HAS_GPIOA && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOA_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOA" -#endif - -#if TIVA_HAS_GPIOB && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOB_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOB" -#endif - -#if TIVA_HAS_GPIOC && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOC_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOC" -#endif - -#if TIVA_HAS_GPIOD && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOD_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOD" -#endif - -#if TIVA_HAS_GPIOE && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOE_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOE" -#endif - -#if TIVA_HAS_GPIOF && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOF_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOF" -#endif - -#if TIVA_HAS_GPIOG && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOG_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOG" -#endif - -#if TIVA_HAS_GPIOH && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOH_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOH" -#endif - -#if TIVA_HAS_GPIOJ && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOJ_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOJ" -#endif - -#if TIVA_HAS_GPIOK && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOK_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOK" -#endif - -#if TIVA_HAS_GPIOL && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOL_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOL" -#endif - -#if TIVA_HAS_GPIOM && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOM_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOM" -#endif - -#if TIVA_HAS_GPION && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPION_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPION" -#endif - -#if TIVA_HAS_GPIOP0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP0" -#endif - -#if TIVA_HAS_GPIOP1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP1" -#endif - -#if TIVA_HAS_GPIOP2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP2" -#endif - -#if TIVA_HAS_GPIOP3 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP3_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP3" -#endif - -#if TIVA_HAS_GPIOP4 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP4_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP4" -#endif - -#if TIVA_HAS_GPIOP5 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP5_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP5" -#endif - -#if TIVA_HAS_GPIOP6 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP6_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP6" -#endif - -#if TIVA_HAS_GPIOP7 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOP7_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOP7" -#endif - -#if TIVA_HAS_GPIOQ0 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ0_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ0" -#endif - -#if TIVA_HAS_GPIOQ1 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ1_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ1" -#endif - -#if TIVA_HAS_GPIOQ2 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ2_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ2" -#endif - -#if TIVA_HAS_GPIOQ3 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ3_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ3" -#endif - -#if TIVA_HAS_GPIOQ4 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ4_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ4" -#endif - -#if TIVA_HAS_GPIOQ5 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ5_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ5" -#endif - -#if TIVA_HAS_GPIOQ6 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ6_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ6" -#endif - -#if TIVA_HAS_GPIOQ7 && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOQ7_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOQ7" -#endif - -#if TIVA_HAS_GPIOR && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOR_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOR" -#endif - -#if TIVA_HAS_GPIOS && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOS_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOS" -#endif - -#if TIVA_HAS_GPIOT && \ - !OSAL_IRQ_IS_VALID_PRIORITY(TIVA_EXT_GPIOT_IRQ_PRIORITY) -#error "Invalid IRQ priority assigned to GPIOT" -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief EXT channel identifier. - */ -typedef uint32_t expchannel_t; - -/** - * @brief Type of an EXT generic notification callback. - * - * @param[in] extp pointer to the @p EXPDriver object triggering the - * callback - */ -typedef void (*extcallback_t)(EXTDriver *extp, expchannel_t channel); - -/** - * @brief Channel configuration structure. - */ -typedef struct { - /** - * @brief Channel mode. - */ - uint32_t mode; - /** - * @brief Channel callback. - */ - extcallback_t cb; -} EXTChannelConfig; - -/** - * @brief Driver configuration structure. - * @note It could be empty on some architectures. - */ -typedef struct { - /** - * @brief Channel configurations. - */ - EXTChannelConfig channels[EXT_MAX_CHANNELS]; - /* End of the mandatory fields.*/ -} EXTConfig; - -/** - * @brief Structure representing an EXT driver. - */ -struct EXTDriver { - /** - * @brief Driver state. - */ - extstate_t state; - /** - * @brief Current configuration data. - */ - const EXTConfig *config; - /* End of the mandatory fields.*/ -}; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(__DOXYGEN__) -extern EXTDriver EXTD1; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void ext_lld_init(void); - void ext_lld_start(EXTDriver *extp); - void ext_lld_stop(EXTDriver *extp); - void ext_lld_channel_enable(EXTDriver *extp, expchannel_t channel); - void ext_lld_channel_disable(EXTDriver *extp, expchannel_t channel); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_EXT */ - -#endif /* HAL_EXT_LLD_H */ - -/** @} */ diff --git a/os/hal/ports/TIVA/LLD/hal_pal_lld.c b/os/hal/ports/TIVA/LLD/hal_pal_lld.c deleted file mode 100644 index 5460fd4..0000000 --- a/os/hal/ports/TIVA/LLD/hal_pal_lld.c +++ /dev/null @@ -1,445 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/LLD/pal_lld.c - * @brief TM4C123x/TM4C129x PAL subsystem low level driver. - * - * @addtogroup PAL - * @{ - */ - -#include "hal.h" - -#if HAL_USE_PAL || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#if TIVA_HAS_GPIOA || defined(__DOXYGEN__) -#define GPIOA_BIT (1 << 0) -#if TIVA_GPIO_GPIOA_USE_AHB && defined(TM4C123x) -#define GPIOA_AHB_BIT (1 << 0) -#else -#define GPIOA_AHB_BIT 0 -#endif -#else -#define GPIOA_BIT 0 -#define GPIOA_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOB || defined(__DOXYGEN__) -#define GPIOB_BIT (1 << 1) -#if TIVA_GPIO_GPIOB_USE_AHB && defined(TM4C123x) -#define GPIOB_AHB_BIT (1 << 1) -#else -#define GPIOB_AHB_BIT 0 -#endif -#else -#define GPIOB_BIT 0 -#define GPIOB_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOC || defined(__DOXYGEN__) -#define GPIOC_BIT (1 << 2) -#if TIVA_GPIO_GPIOC_USE_AHB && defined(TM4C123x) -#define GPIOC_AHB_BIT (1 << 2) -#else -#define GPIOC_AHB_BIT 0 -#endif -#else -#define GPIOC_BIT 0 -#define GPIOC_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOD || defined(__DOXYGEN__) -#define GPIOD_BIT (1 << 3) -#if TIVA_GPIO_GPIOD_USE_AHB && defined(TM4C123x) -#define GPIOD_AHB_BIT (1 << 3) -#else -#define GPIOD_AHB_BIT 0 -#endif -#else -#define GPIOD_BIT 0 -#define GPIOD_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOE || defined(__DOXYGEN__) -#define GPIOE_BIT (1 << 4) -#if TIVA_GPIO_GPIOE_USE_AHB && defined(TM4C123x) -#define GPIOE_AHB_BIT (1 << 4) -#else -#define GPIOE_AHB_BIT 0 -#endif -#else -#define GPIOE_BIT 0 -#define GPIOE_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOF || defined(__DOXYGEN__) -#define GPIOF_BIT (1 << 5) -#if TIVA_GPIO_GPIOF_USE_AHB && defined(TM4C123x) -#define GPIOF_AHB_BIT (1 << 5) -#else -#define GPIOF_AHB_BIT 0 -#endif -#else -#define GPIOF_BIT 0 -#define GPIOF_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) -#define GPIOG_BIT (1 << 6) -#if TIVA_GPIO_GPIOG_USE_AHB && defined(TM4C123x) -#define GPIOG_AHB_BIT (1 << 6) -#else -#define GPIOG_AHB_BIT 0 -#endif -#else -#define GPIOG_BIT 0 -#define GPIOG_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) -#define GPIOH_BIT (1 << 7) -#if TIVA_GPIO_GPIOH_USE_AHB && defined(TM4C123x) -#define GPIOH_AHB_BIT (1 << 7) -#else -#define GPIOH_AHB_BIT 0 -#endif -#else -#define GPIOH_BIT 0 -#define GPIOH_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) -#define GPIOJ_BIT (1 << 8) -#if TIVA_GPIO_GPIOJ_USE_AHB && defined(TM4C123x) -#define GPIOJ_AHB_BIT (1 << 8) -#else -#define GPIOJ_AHB_BIT 0 -#endif -#else -#define GPIOJ_BIT 0 -#define GPIOJ_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) -#define GPIOK_BIT (1 << 9) -#define GPIOK_AHB_BIT (1 << 9) -#else -#define GPIOK_BIT 0 -#define GPIOK_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) -#define GPIOL_BIT (1 << 10) -#define GPIOL_AHB_BIT (1 << 10) -#else -#define GPIOL_BIT 0 -#define GPIOL_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) -#define GPIOM_BIT (1 << 11) -#define GPIOM_AHB_BIT (1 << 11) -#else -#define GPIOM_BIT 0 -#define GPIOM_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPION || defined(__DOXYGEN__) -#define GPION_BIT (1 << 12) -#define GPION_AHB_BIT (1 << 12) -#else -#define GPION_BIT 0 -#define GPION_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) -#define GPIOP_BIT (1 << 13) -#define GPIOP_AHB_BIT (1 << 13) -#else -#define GPIOP_BIT 0 -#define GPIOP_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) -#define GPIOQ_BIT (1 << 14) -#define GPIOQ_AHB_BIT (1 << 14) -#else -#define GPIOQ_BIT 0 -#define GPIOQ_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) -#define GPIOR_BIT (1 << 15) -#define GPIOR_AHB_BIT (1 << 15) -#else -#define GPIOR_BIT 0 -#define GPIOR_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) -#define GPIOS_BIT (1 << 16) -#define GPIOS_AHB_BIT (1 << 16) -#else -#define GPIOS_BIT 0 -#define GPIOS_AHB_BIT 0 -#endif - -#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) -#define GPIOT_BIT (1 << 17) -#define GPIOT_AHB_BIT (1 << 17) -#else -#define GPIOT_BIT 0 -#define GPIOT_AHB_BIT 0 -#endif - -#define RCGCGPIO_MASK (GPIOA_BIT | GPIOB_BIT | GPIOC_BIT | GPIOD_BIT | \ - GPIOE_BIT | GPIOF_BIT | GPIOG_BIT | GPIOH_BIT | \ - GPIOJ_BIT | GPIOK_BIT | GPIOL_BIT | GPIOM_BIT | \ - GPION_BIT | GPIOP_BIT | GPIOQ_BIT | GPIOR_BIT | \ - GPIOS_BIT | GPIOR_BIT) - -#define GPIOHBCTL_MASK (GPIOA_AHB_BIT | GPIOB_AHB_BIT | GPIOC_AHB_BIT | \ - GPIOD_AHB_BIT | GPIOE_AHB_BIT | GPIOF_AHB_BIT | \ - GPIOG_AHB_BIT | GPIOH_AHB_BIT | GPIOJ_AHB_BIT | \ - GPIOK_AHB_BIT | GPIOL_AHB_BIT | GPIOM_AHB_BIT | \ - GPION_AHB_BIT | GPIOP_AHB_BIT | GPIOQ_AHB_BIT | \ - GPIOR_AHB_BIT | GPIOS_AHB_BIT | GPIOT_AHB_BIT) - -/* GPIO lock password.*/ -#define TIVA_GPIO_LOCK_PWD 0x4C4F434B - -#define GPIOC_JTAG_MASK (0x0F) -#define GPIOD_NMI_MASK (0x80) -#define GPIOF_NMI_MASK (0x01) - -/*===========================================================================*/ -/* Driver exported variables. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local variables and types. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief Initializes the port with the port configuration. - * - * @param[in] port the port identifier - * @param[in] config the port configuration - */ -static void gpio_init(ioportid_t port, const tiva_gpio_setup_t *config) -{ - port->DATA = config->data; - port->DIR = config->dir; - port->AFSEL = config->afsel; - port->DR2R = config->dr2r; - port->DR4R = config->dr4r; - port->DR8R = config->dr8r; - port->ODR = config->odr; - port->PUR = config->pur; - port->PDR = config->pdr; - port->SLR = config->slr; - port->DEN = config->den; - port->AMSEL = config->amsel; - port->PCTL = config->pctl; -} - -/** - * @brief Unlocks the masked pins of the GPIO peripheral. - * @note This function is only useful for PORTC0-3, PORTD7 and PORTF0. - * - * @param[in] port the port identifier - * @param[in] mask the pin mask - */ -static void gpio_unlock(ioportid_t port, ioportmask_t mask) -{ - port->LOCK = TIVA_GPIO_LOCK_PWD; - port->CR = mask; -} - -/*===========================================================================*/ -/* Driver interrupt handlers. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/** - * @brief Tiva I/O ports configuration. - * @details Ports A-F (G, H, J, K, L, M, N, P, Q, R, S, T) clocks enabled. - * - * @param[in] config the Tiva ports configuration - * - * @notapi - */ -void _pal_lld_init(const PALConfig *config) -{ - /* - * Enables all GPIO clocks. - */ - SYSCTL->RCGCGPIO = RCGCGPIO_MASK; -#if defined(TM4C123x) - SYSCTL->GPIOHBCTL = GPIOHBCTL_MASK; -#endif - - /* Wait until all GPIO modules are ready */ - while (!((SYSCTL->PRGPIO & RCGCGPIO_MASK) == RCGCGPIO_MASK)) - ; - -#if TIVA_HAS_GPIOA - gpio_init(GPIOA, &config->PAData); -#endif -#if TIVA_HAS_GPIOB - gpio_init(GPIOB, &config->PBData); -#endif -#if TIVA_HAS_GPIOC - /* Unlock JTAG pins.*/ - gpio_unlock(GPIOC, GPIOC_JTAG_MASK); - gpio_init(GPIOC, &config->PCData); -#endif -#if TIVA_HAS_GPIOD - /* Unlock NMI pin.*/ - gpio_unlock(GPIOD, GPIOD_NMI_MASK); - gpio_init(GPIOD, &config->PDData); -#endif -#if TIVA_HAS_GPIOE - gpio_init(GPIOE, &config->PEData); -#endif -#if TIVA_HAS_GPIOF - /* Unlock NMI pin.*/ - gpio_unlock(GPIOF, GPIOF_NMI_MASK); - gpio_init(GPIOF, &config->PFData); -#endif -#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) - gpio_init(GPIOG, &config->PGData); -#endif -#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) - gpio_init(GPIOH, &config->PHData); -#endif -#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) - gpio_init(GPIOJ, &config->PJData); -#endif -#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) - gpio_init(GPIOK, &config->PKData); -#endif -#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) - gpio_init(GPIOL, &config->PLData); -#endif -#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) - gpio_init(GPIOM, &config->PMData); -#endif -#if TIVA_HAS_GPION || defined(__DOXYGEN__) - gpio_init(GPION, &config->PNData); -#endif -#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) - gpio_init(GPIOP, &config->PPData); -#endif -#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) - gpio_init(GPIOQ, &config->PQData); -#endif -#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) - gpio_init(GPIOR, &config->PRData); -#endif -#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) - gpio_init(GPIOS, &config->PSData); -#endif -#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) - gpio_init(GPIOT, &config->PTData); -#endif -} - -/** - * @brief Pads mode setup. - * @details This function programs a pads group belonging to the same port - * with the specified mode. - * - * @param[in] port the port identifier - * @param[in] mask the group mask - * @param[in] mode the mode - * - * @notapi - */ -void _pal_lld_setgroupmode(ioportid_t port, ioportmask_t mask, iomode_t mode) -{ - uint32_t dir = (mode & PAL_TIVA_DIR_MASK) >> 0; - uint32_t afsel = (mode & PAL_TIVA_AFSEL_MASK) >> 1; - uint32_t dr2r = (mode & PAL_TIVA_DR2R_MASK) >> 2; - uint32_t dr4r = (mode & PAL_TIVA_DR4R_MASK) >> 3; - uint32_t dr8r = (mode & PAL_TIVA_DR8R_MASK) >> 4; - uint32_t odr = (mode & PAL_TIVA_ODR_MASK) >> 5; - uint32_t pur = (mode & PAL_TIVA_PUR_MASK) >> 6; - uint32_t pdr = (mode & PAL_TIVA_PDR_MASK) >> 7; - uint32_t slr = (mode & PAL_TIVA_SLR_MASK) >> 8; - uint32_t den = (mode & PAL_TIVA_DEN_MASK) >> 9; - uint32_t amsel = (mode & PAL_TIVA_AMSEL_MASK) >> 10; - uint32_t pctl = (mode & PAL_TIVA_PCTL_MASK) >> 11; - uint32_t bit = 0; - - while(TRUE) { - uint32_t pctl_mask = (7 << (4 * bit)); - uint32_t bit_mask = (1 << bit); - - if ((mask & 1) != 0) { - port->DIR = (port->DIR & ~bit_mask) | dir; - port->AFSEL = (port->AFSEL & ~bit_mask) | afsel; - port->DR2R = (port->DR2R & ~bit_mask) | dr2r; - port->DR4R = (port->DR4R & ~bit_mask) | dr4r; - port->DR8R = (port->DR8R & ~bit_mask) | dr8r; - port->ODR = (port->ODR & ~bit_mask) | odr; - port->PUR = (port->PUR & ~bit_mask) | pur; - port->PDR = (port->PDR & ~bit_mask) | pdr; - port->SLR = (port->SLR & ~bit_mask) | slr; - port->DEN = (port->DEN & ~bit_mask) | den; - port->AMSEL = (port->AMSEL & ~bit_mask) | amsel; - port->PCTL = (port->PCTL & ~pctl_mask) | pctl; - } - - mask >>= 1; - if (!mask) { - return; - } - - dir <<= 1; - afsel <<= 1; - dr2r <<= 1; - dr4r <<= 1; - dr8r <<= 1; - odr <<= 1; - pur <<= 1; - pdr <<= 1; - slr <<= 1; - den <<= 1; - amsel <<= 1; - pctl <<= 4; - - bit++; - } -} - -#endif /* HAL_USE_PAL */ - -/** - * @} - */ diff --git a/os/hal/ports/TIVA/LLD/hal_pal_lld.h b/os/hal/ports/TIVA/LLD/hal_pal_lld.h deleted file mode 100644 index c0cd82b..0000000 --- a/os/hal/ports/TIVA/LLD/hal_pal_lld.h +++ /dev/null @@ -1,762 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file TIVA/LLD/pal_lld.h - * @brief TM4C123x/TM4C129x PAL subsystem low level driver header. - * - * @addtogroup PAL - * @{ - */ - -#ifndef HAL_PAL_LLD_H -#define HAL_PAL_LLD_H - -#if HAL_USE_PAL || defined(__DOXYGEN__) - -/*===========================================================================*/ -/* Driver constants. */ -/*===========================================================================*/ - -#undef PAL_MODE_RESET -#undef PAL_MODE_UNCONNECTED -#undef PAL_MODE_INPUT -#undef PAL_MODE_INPUT_PULLUP -#undef PAL_MODE_INPUT_PULLDOWN -#undef PAL_MODE_INPUT_ANALOG -#undef PAL_MODE_OUTPUT_PUSHPULL -#undef PAL_MODE_OUTPUT_OPENDRAIN - -/** - * @name TIVA-specific I/O mode flags - * @{ - */ -#define PAL_TIVA_DIR_MASK (1 << 0) -#define PAL_TIVA_DIR_INPUT (0 << 0) -#define PAL_TIVA_DIR_OUTPUT (1 << 0) - -#define PAL_TIVA_AFSEL_MASK (1 << 1) -#define PAL_TIVA_AFSEL_GPIO (0 << 1) -#define PAL_TIVA_AFSEL_ALTERNATE (1 << 1) - -#define PAL_TIVA_DR2R_MASK (1 << 2) -#define PAL_TIVA_DR2R_DISABLE (0 << 2) -#define PAL_TIVA_DR2R_ENABLE (1 << 2) - -#define PAL_TIVA_DR4R_MASK (1 << 3) -#define PAL_TIVA_DR4R_DISABLE (0 << 3) -#define PAL_TIVA_DR4R_ENABLE (1 << 3) - -#define PAL_TIVA_DR8R_MASK (1 << 4) -#define PAL_TIVA_DR8R_DISABLE (0 << 4) -#define PAL_TIVA_DR8R_ENABLE (1 << 4) - -#define PAL_TIVA_ODR_MASK (1 << 5) -#define PAL_TIVA_ODR_PUSHPULL (0 << 5) -#define PAL_TIVA_ODR_OPENDRAIN (1 << 5) - -#define PAL_TIVA_PUR_MASK (1 << 6) -#define PAL_TIVA_PUR_DISABLE (0 << 6) -#define PAL_TIVA_PUR_ENABLE (1 << 6) - -#define PAL_TIVA_PDR_MASK (1 << 7) -#define PAL_TIVA_PDR_DISABLE (0 << 7) -#define PAL_TIVA_PDR_ENABLE (1 << 7) - -#define PAL_TIVA_SLR_MASK (1 << 8) -#define PAL_TIVA_SLR_DISABLE (0 << 8) -#define PAL_TIVA_SLR_ENABLE (1 << 8) - -#define PAL_TIVA_DEN_MASK (1 << 9) -#define PAL_TIVA_DEN_DISABLE (0 << 9) -#define PAL_TIVA_DEN_ENABLE (1 << 9) - -#define PAL_TIVA_AMSEL_MASK (1 << 10) -#define PAL_TIVA_AMSEL_DISABLE (0 << 10) -#define PAL_TIVA_AMSEL_ENABLE (1 << 10) - -#define PAL_TIVA_PCTL_MASK (7 << 11) -#define PAL_TIVA_PCTL(n) ((n) << 11) - -/** - * @brief Alternate function. - * - * @param[in] n alternate function selector - */ -#define PAL_MODE_ALTERNATE(n) (PAL_TIVA_AFSEL_ALTERNATE | \ - PAL_TIVA_PCTL(n)) -/** - * @} - */ - -/** - * @name Standard I/O mode flags - * @{ - */ -/** - * @brief This mode is implemented as input. - */ -#define PAL_MODE_RESET PAL_MODE_INPUT - -/** - * @brief This mode is implemented as input with pull-up. - */ -#define PAL_MODE_UNCONNECTED PAL_MODE_INPUT_PULLUP - -/** - * @brief Regular input high-Z pad. - */ -#define PAL_MODE_INPUT (PAL_TIVA_DEN_ENABLE | \ - PAL_TIVA_DIR_INPUT) - -/** - * @brief Input pad with weak pull up resistor. - */ -#define PAL_MODE_INPUT_PULLUP (PAL_TIVA_DIR_INPUT | \ - PAL_TIVA_PUR_ENABLE | \ - PAL_TIVA_DEN_ENABLE) - -/** - * @brief Input pad with weak pull down resistor. - */ -#define PAL_MODE_INPUT_PULLDOWN (PAL_TIVA_DIR_INPUT | \ - PAL_TIVA_PDR_ENABLE | \ - PAL_TIVA_DEN_ENABLE) - -/** - * @brief Analog input mode. - */ -#define PAL_MODE_INPUT_ANALOG (PAL_TIVA_DEN_DISABLE | \ - PAL_TIVA_AMSEL_ENABLE) - -/** - * @brief Push-pull output pad. - */ -#define PAL_MODE_OUTPUT_PUSHPULL (PAL_TIVA_DIR_OUTPUT | \ - PAL_TIVA_DR2R_ENABLE | \ - PAL_TIVA_ODR_PUSHPULL | \ - PAL_TIVA_DEN_ENABLE) - -/** - * @brief Open-drain output pad. - */ -#define PAL_MODE_OUTPUT_OPENDRAIN (PAL_TIVA_DIR_OUTPUT | \ - PAL_TIVA_DR2R_ENABLE | \ - PAL_TIVA_ODR_OPENDRAIN | \ - PAL_TIVA_DEN_ENABLE) -/** - * @} - */ - -/** @brief GPIOA port identifier.*/ -#define IOPORT1 GPIOA - -/** @brief GPIOB port identifier.*/ -#define IOPORT2 GPIOB - -/** @brief GPIOC port identifier.*/ -#define IOPORT3 GPIOC - -/** @brief GPIOD port identifier.*/ -#define IOPORT4 GPIOD - -/** @brief GPIOE port identifier.*/ -#define IOPORT5 GPIOE - -/** @brief GPIOF port identifier.*/ -#define IOPORT6 GPIOF - -#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) -/** @brief Port G setup data.*/ -#define IOPORT7 GPIOG -#endif /* TIVA_HAS_GPIOG.*/ - -#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) -/** @brief Port H setup data.*/ -#define IOPORT8 GPIOH -#endif /* TIVA_HAS_GPIOH.*/ - -#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) -/** @brief Port J setup data.*/ -#define IOPORT9 GPIOJ -#endif /* TIVA_HAS_GPIOJ.*/ - -#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) -/** @brief Port K setup data.*/ -#define IOPORT10 GPIOK -#endif /* TIVA_HAS_GPIOK.*/ - -#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) -/** @brief Port L setup data.*/ -#define IOPORT11 GPIOL -#endif /* TIVA_HAS_GPIOL.*/ - -#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) -/** @brief Port M setup data.*/ -#define IOPORT12 GPIOM -#endif /* TIVA_HAS_GPIOM.*/ - -#if TIVA_HAS_GPION || defined(__DOXYGEN__) -/** @brief Port N setup data.*/ -#define IOPORT13 GPION -#endif /* TIVA_HAS_GPION.*/ - -#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) -/** @brief Port P setup data.*/ -#define IOPORT14 GPIOP -#endif /* TIVA_HAS_GPIOP.*/ - -#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) -/** @brief Port Q setup data.*/ -#define IOPORT15 GPIOQ -#endif /* TIVA_HAS_GPIOQ.*/ - -#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) -/** @brief Port R setup data.*/ -#define IOPORT16 GPIOR -#endif /* TIVA_HAS_GPIOR.*/ - -#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) -/** @brief Port S setup data.*/ -#define IOPORT17 GPIOS -#endif /* TIVA_HAS_GPIOS.*/ - -#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) -/** @brief Port T setup data.*/ -#define IOPORT18 GPIOT -#endif /* TIVA_HAS_GPIOT.*/ - -/** - * @brief Width, in bits, of an I/O port. - */ -#define PAL_IOPORTS_WIDTH 8 - -/** - * @brief Whole port mask. - * @brief This macro specifies all the valid bits into a port. - */ -#define PAL_WHOLE_PORT ((ioportmask_t)0xFF) - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -#if defined(TM4C123x) - -/** - * @brief GPIOA AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOA. When set - * to @p FALSE the APB bus is used to access GPIOA. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOA_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#endif - -/** - * @brief GPIOB AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOB. When set - * to @p FALSE the APB bus is used to access GPIOB. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOB_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#endif - -/** - * @brief GPIOC AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOC. When set - * to @p FALSE the APB bus is used to access GPIOC. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOC_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#endif - -/** - * @brief GPIOD AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOD. When set - * to @p FALSE the APB bus is used to access GPIOD. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOD_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#endif - -/** - * @brief GPIOE AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOE. When set - * to @p FALSE the APB bus is used to access GPIOE. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOE_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#endif - -/** - * @brief GPIOF AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOF. When set - * to @p FALSE the APB bus is used to access GPIOF. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOF_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOF_USE_AHB TRUE -#endif - -/** - * @brief GPIOG AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOG. When set - * to @p FALSE the APB bus is used to access GPIOG. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOG_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOG_USE_AHB TRUE -#endif - -/** - * @brief GPIOH AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOH. When set - * to @p FALSE the APB bus is used to access GPIOH. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOH_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOH_USE_AHB TRUE -#endif - -/** - * @brief GPIOJ AHB enable switch. - * @details When set to @p TRUE the AHB bus is used to access GPIOJ. When set - * to @p FALSE the APB bus is used to access GPIOJ. - * @note The default is TRUE. - */ -#if !defined(TIVA_GPIO_GPIOJ_USE_AHB) || defined(__DOXYGEN__) -#define TIVA_GPIO_GPIOJ_USE_AHB TRUE -#endif - -#endif - -/*===========================================================================*/ -/* Derived constants and error checks. */ -/*===========================================================================*/ - -#if defined(TM4C123x) - -#if TIVA_GPIO_GPIOA_USE_AHB -#define GPIOA GPIOA_AHB -#else -#define GPIOA GPIOA_APB -#endif - -#if TIVA_GPIO_GPIOB_USE_AHB -#define GPIOB GPIOB_AHB -#else -#define GPIOB GPIOB_APB -#endif - -#if TIVA_GPIO_GPIOC_USE_AHB -#define GPIOC GPIOC_AHB -#else -#define GPIOC GPIOC_APB -#endif - -#if TIVA_GPIO_GPIOD_USE_AHB -#define GPIOD GPIOD_AHB -#else -#define GPIOD GPIOD_APB -#endif - -#if TIVA_GPIO_GPIOE_USE_AHB -#define GPIOE GPIOE_AHB -#else -#define GPIOE GPIOE_APB -#endif - -#if TIVA_GPIO_GPIOF_USE_AHB -#define GPIOF GPIOF_AHB -#else -#define GPIOF GPIOF_APB -#endif - -#if TIVA_GPIO_GPIOG_USE_AHB -#define GPIOG GPIOG_AHB -#else -#define GPIOG GPIOG_APB -#endif - -#if TIVA_GPIO_GPIOH_USE_AHB -#define GPIOH GPIOH_AHB -#else -#define GPIOH GPIOH_APB -#endif - -#if TIVA_GPIO_GPIOJ_USE_AHB -#define GPIOJ GPIOJ_AHB -#else -#define GPIOJ GPIOJ_APB -#endif - -#define GPIOK GPIOK_AHB -#define GPIOL GPIOL_AHB -#define GPIOM GPIOM_AHB -#define GPION GPION_AHB -#define GPIOP GPIOP_AHB -#define GPIOQ GPIOQ_AHB - -#endif - -/*===========================================================================*/ -/* Driver data structures and types. */ -/*===========================================================================*/ - -/** - * @brief GPIO port setup info. - */ -typedef struct -{ - /** @brief Initial value for DATA register.*/ - uint32_t data; - /** @brief Initial value for DIR register.*/ - uint32_t dir; - /** @brief Initial value for AFSEL register.*/ - uint32_t afsel; - /** @brief Initial value for DR2R register.*/ - uint32_t dr2r; - /** @brief Initial value for DR4R register.*/ - uint32_t dr4r; - /** @brief Initial value for DR8R register.*/ - uint32_t dr8r; - /** @brief Initial value for ODR register.*/ - uint32_t odr; - /** @brief Initial value for PUR register.*/ - uint32_t pur; - /** @brief Initial value for PDR register.*/ - uint32_t pdr; - /** @brief Initial value for SLR register.*/ - uint32_t slr; - /** @brief Initial value for DEN register.*/ - uint32_t den; - /** @brief Initial value for AMSEL register.*/ - uint32_t amsel; - /** @brief Initial value for PCTL register.*/ - uint32_t pctl; -} tiva_gpio_setup_t; - -/** - * @brief Tiva GPIO static initializer. - * @details An instance of this structure must be passed to @p palInit() at - * system startup time in order to initialized the digital I/O - * subsystem. This represents only the initial setup, specific pads - * or whole ports can be reprogrammed at later time. - */ -typedef struct -{ - /** @brief Port A setup data.*/ - tiva_gpio_setup_t PAData; - /** @brief Port B setup data.*/ - tiva_gpio_setup_t PBData; - /** @brief Port C setup data.*/ - tiva_gpio_setup_t PCData; - /** @brief Port D setup data.*/ - tiva_gpio_setup_t PDData; - /** @brief Port E setup data.*/ - tiva_gpio_setup_t PEData; - /** @brief Port F setup data.*/ - tiva_gpio_setup_t PFData; - -#if TIVA_HAS_GPIOG || defined(__DOXYGEN__) - /** @brief Port G setup data.*/ - tiva_gpio_setup_t PGData; -#endif /* TIVA_HAS_GPIOG.*/ - -#if TIVA_HAS_GPIOH || defined(__DOXYGEN__) - /** @brief Port H setup data.*/ - tiva_gpio_setup_t PHData; -#endif /* TIVA_HAS_GPIOH.*/ - -#if TIVA_HAS_GPIOJ || defined(__DOXYGEN__) - /** @brief Port J setup data.*/ - tiva_gpio_setup_t PJData; -#endif /* TIVA_HAS_GPIOJ.*/ - -#if TIVA_HAS_GPIOK || defined(__DOXYGEN__) - /** @brief Port K setup data.*/ - tiva_gpio_setup_t PKData; -#endif /* TIVA_HAS_GPIOK.*/ - -#if TIVA_HAS_GPIOL || defined(__DOXYGEN__) - /** @brief Port L setup data.*/ - tiva_gpio_setup_t PLData; -#endif /* TIVA_HAS_GPIOL.*/ - -#if TIVA_HAS_GPIOM || defined(__DOXYGEN__) - /** @brief Port M setup data.*/ - tiva_gpio_setup_t PMData; -#endif /* TIVA_HAS_GPIOM.*/ - -#if TIVA_HAS_GPION || defined(__DOXYGEN__) - /** @brief Port N setup data.*/ - tiva_gpio_setup_t PNData; -#endif /* TIVA_HAS_GPION.*/ - -#if TIVA_HAS_GPIOP || defined(__DOXYGEN__) - /** @brief Port P setup data.*/ - tiva_gpio_setup_t PPData; -#endif /* TIVA_HAS_GPIOP.*/ - -#if TIVA_HAS_GPIOQ || defined(__DOXYGEN__) - /** @brief Port Q setup data.*/ - tiva_gpio_setup_t PQData; -#endif /* TIVA_HAS_GPIOQ.*/ - -#if TIVA_HAS_GPIOR || defined(__DOXYGEN__) - /** @brief Port R setup data.*/ - tiva_gpio_setup_t PRData; -#endif /* TIVA_HAS_GPIOR.*/ - -#if TIVA_HAS_GPIOS || defined(__DOXYGEN__) - /** @brief Port S setup data.*/ - tiva_gpio_setup_t PSData; -#endif /* TIVA_HAS_GPIOS.*/ - -#if TIVA_HAS_GPIOT || defined(__DOXYGEN__) - /** @brief Port T setup data.*/ - tiva_gpio_setup_t PTData; -#endif /* TIVA_HAS_GPIOT.*/ -} PALConfig; - -/** - * @brief Digital I/O port sized unsigned type. - */ -typedef uint32_t ioportmask_t; - -/** - * @brief Digital I/O modes. - */ -typedef uint32_t iomode_t; - -/** - * @brief Port Identifier. - */ -typedef GPIO_TypeDef *ioportid_t; - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/** - * @brief Low level PAL subsystem initialization. - * - * @param[in] config architecture-dependent ports configuration - * - * @notapi - */ -#define pal_lld_init(config) _pal_lld_init(config) - -/** - * @brief Reads the physical I/O port states. - * - * @param[in] port port identifier - * @return The port bits. - * - * @notapi - */ -#define pal_lld_readport(port) ((port)->DATA) - -/** - * @brief Reads the output latch. - * @details The purpose of this function is to read back the latched output - * value. - * - * @param[in] port port identifier - * @return The latched logical states. - * - * @notapi - */ -#define pal_lld_readlatch(port) ((port)->DATA) - -/** - * @brief Writes a bits mask on a I/O port. - * - * @param[in] port port identifier - * @param[in] bits bits to be written on the specified port - * - * @notapi - */ -#define pal_lld_writeport(port, bits) ((port)->DATA = (bits)) - -/** - * @brief Sets a bits mask on a I/O port. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] bits bits to be ORed on the specified port - * - * @notapi - */ -#define pal_lld_setport(port, bits) ((port)->MASKED_ACCESS[bits] = 0xFF) - -/** - * @brief Clears a bits mask on a I/O port. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] bits bits to be cleared on the specified port - * - * @notapi - */ -#define pal_lld_clearport(port, bits) ((port)->MASKED_ACCESS[bits] = 0) - -/** - * @brief Reads a group of bits. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] mask group mask - * @param[in] offset group bit offset within the port - * @return The group logical states. - * - * @notapi - */ -#define pal_lld_readgroup(port, mask, offset) \ - ((port)->MASKED_ACCESS[(mask) << (offset)]) - -/** - * @brief Writes a group of bits. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] mask group mask - * @param[in] offset group bit offset within the port - * @param[in] bits bits to be written. Values exceeding the group width - * are masked. - * - * @notapi - */ -#define pal_lld_writegroup(port, mask, offset, bits) \ - ((port)->MASKED_ACCESS[(mask) << (offset)] = (bits)) - -/** - * @brief Pads group mode setup. - * @details This function programs a pads group belonging to the same port - * with the specified mode. - * @note Programming an unknown or unsupported mode is silently ignored. - * - * @param[in] port port identifier - * @param[in] mask group mask - * @param[in] offset group bit offset within the port - * @param[in] mode group mode - * - * @notapi - */ -#define pal_lld_setgroupmode(port, mask, offset, mode) \ - _pal_lld_setgroupmode(port, mask << offset, mode) - -/** - * @brief Reads a logical state from an I/O pad. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * @return The logical state. - * @retval PAL_LOW low logical state. - * @retval PAL_HIGH high logical state. - * - * @notapi - */ -#define pal_lld_readpad(port, pad) ((port)->MASKED_ACCESS[1 << (pad)]) - -/** - * @brief Writes a logical state on an output pad. - * @note This function is not meant to be invoked directly by the - * application code. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * @param[in] bit logical value, the value must be @p PAL_LOW or - * @p PAL_HIGH - * - * @notapi - */ -#define pal_lld_writepad(port, pad, bit) \ - ((port)->MASKED_ACCESS[1 << (pad)] = (bit)) - -/** - * @brief Sets a pad logical state to @p PAL_HIGH. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * - * @notapi - */ -#define pal_lld_setpad(port, pad) \ - ((port)->MASKED_ACCESS[1 << (pad)] = 1 << (pad)) - -/** - * @brief Clears a pad logical state to @p PAL_LOW. - * @note The @ref PAL provides a default software implementation of this - * functionality, implement this function if can optimize it by using - * special hardware functionalities or special coding. - * - * @param[in] port port identifier - * @param[in] pad pad number within the port - * - * @notapi - */ -#define pal_lld_clearpad(port, pad) \ - ((port)->MASKED_ACCESS[1 << (pad)] = 0) - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -#if !defined(__DOXYGEN__) -extern const PALConfig pal_default_config; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void _pal_lld_init(const PALConfig *config); - void _pal_lld_setgroupmode(ioportid_t port, - ioportmask_t mask, - iomode_t mode); -#ifdef __cplusplus -} -#endif - -#endif /* HAL_USE_PAL */ - -#endif /* HAL_PAL_LLD_H */ - -/** - * @} - */ diff --git a/os/hal/ports/TIVA/LLD/tiva_gpt.h b/os/hal/ports/TIVA/LLD/tiva_gpt.h deleted file mode 100644 index 114831b..0000000 --- a/os/hal/ports/TIVA/LLD/tiva_gpt.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file tiva_gpt.h - * @brief TIVA GPT registers layout header. - * - * @addtogroup TIVA_GPT - * @{ - */ - -#ifndef TIVA_GPT_H_ -#define TIVA_GPT_H_ - -// cfg -#define GPTM_CFG_CFG_MASK (7 << 0) -#define GPTM_CFG_CFG_WHOLE (0 << 0) -#define GPTM_CFG_CFG_RTC (1 << 0) -#define GPTM_CFG_CFG_SPLIT (4 << 0) - -// tamr -#define GPTM_TAMR_TAMR_MASK (3 << 0) -#define GPTM_TAMR_TAMR_ONESHOT (1 << 0) -#define GPTM_TAMR_TAMR_PERIODIC (2 << 0) -#define GPTM_TAMR_TAMR_CAPTURE (3 << 0) - -#define GPTM_TAMR_TACMR (1 << 2) - -#define GPTM_TAMR_TAAMS (1 << 3) - -#define GPTM_TAMR_TACDIR (1 << 4) - -#define GPTM_TAMR_TAMIE (1 << 5) - -#define GPTM_TAMR_TAWOT (1 << 6) - -#define GPTM_TAMR_TASNAPS (1 << 7) - -#define GPTM_TAMR_TAILD (1 << 8) - -#define GPTM_TAMR_TAPWMIE (1 << 9) - -#define GPTM_TAMR_TAMRSU (1 << 10) - -#define GPTM_TAMR_TAPLO (1 << 11) - -// ctl -#define GPTM_CTL_TAEN (1 << 0) - -#define GPTM_CTL_TASTALL (1 << 1) - -#define GPTM_CTL_TAEVENT_MASK (3 << 2) -#define GPTM_CTL_TAEVENT_POS (0 << 2) -#define GPTM_CTL_TAEVENT_NEG (1 << 2) -#define GPTM_CTL_TAEVENT_BOTH (3 << 2) - -#define GPTM_CTL_RTCEN (1 << 4) - -#define GPTM_CTL_TAOTE (1 << 5) - -#define GPTM_CTL_TAPWML (1 << 6) - -#define GPTM_CTL_TBEN (1 << 8) - -#define GPTM_CTL_TBSTALL (1 << 9) - -#define GPTM_CTL_TBEVENT_MASK (3 << 10) -#define GPTM_CTL_TBEVENT_POS (0 << 10) -#define GPTM_CTL_TBEVENT_NEG (1 << 10) -#define GPTM_CTL_TBEVENT_BOTH (3 << 10) - -#define GPTM_CTL_TBOTE (1 << 13) - -#define GPTM_CTL_TBPWML (1 << 14) - -// imr -#define GPTM_IMR_TATOIM (1 << 0) - -#define GPTM_IMR_CAMIM (1 << 1) - -#define GPTM_IMR_CAEIM (1 << 2) - -#define GPTM_IMR_RTCIM (1 << 3) - -#define GPTM_IMR_TAMIM (1 << 4) - -#define GPTM_IMR_TBTOIM (1 << 8) - -#define GPTM_IMR_CBMIM (1 << 9) - -#define GPTM_IMR_CBEIM (1 << 10) - -#define GPTM_IMR_TBMIM (1 << 11) - -#define GPTM_IMR_WUEIM (1 << 16) - -// icr -#define GPTM_ICR_TATOCINT (1 << 0) - -#define GPTM_ICR_CAMCINT (1 << 1) - -#define GPTM_ICR_CAECINT (1 << 2) - -#define GPTM_ICR_RTCCINT (1 << 3) - -#define GPTM_ICR_TAMCINT (1 << 4) - -#define GPTM_ICR_TBTOCINT (1 << 8) - -#define GPTM_ICR_CBMCINT (1 << 9) - -#define GPTM_ICR_CBECINT (1 << 10) - -#define GPTM_ICR_TBMCINT (1 << 11) - -#define GPTM_ICR_WUECINT (1 << 16) - -#endif /* TIVA_GPT_H_ */ - -/* - * @} - */ diff --git a/os/hal/ports/TIVA/LLD/uDMA/driver.mk b/os/hal/ports/TIVA/LLD/uDMA/driver.mk new file mode 100644 index 0000000..3a2d929 --- /dev/null +++ b/os/hal/ports/TIVA/LLD/uDMA/driver.mk @@ -0,0 +1,2 @@ +PLATFORMSRC += ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/uDMA/tiva_udma.c +PLATFORMINC += $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/uDMA diff --git a/os/hal/ports/TIVA/LLD/tiva_udma.c b/os/hal/ports/TIVA/LLD/uDMA/tiva_udma.c index 9f122b2..2d18ff5 100644 --- a/os/hal/ports/TIVA/LLD/tiva_udma.c +++ b/os/hal/ports/TIVA/LLD/uDMA/tiva_udma.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,6 +14,14 @@ limitations under the License. */ +/** + * @file uDMA/tiva_udma.c + * @brief DMA helper driver code. + * + * @addtogroup TIVA_DMA + * @{ + */ + #include "hal.h" /* The following macro is only defined if some driver requiring DMA services @@ -75,8 +83,8 @@ OSAL_IRQ_HANDLER(TIVA_UDMA_ERR_HANDLER) /* TODO Do we need to halt the system on a DMA error?*/ - if (UDMA->ERRCLR) { - UDMA->ERRCLR = 1; + if (HWREG(UDMA_ERRCLR)) { + HWREG(UDMA_ERRCLR) = 1; } OSAL_IRQ_EPILOGUE(); @@ -96,18 +104,18 @@ void udmaInit(void) udma_channel_mask = 0; /* Enable UDMA module.*/ - SYSCTL->RCGCDMA = 1; - while (!(SYSCTL->PRDMA & (1 << 0))) + HWREG(SYSCTL_RCGCDMA) = 1; + while (!(HWREG(SYSCTL_PRDMA) & (1 << 0))) ; nvicEnableVector(TIVA_UDMA_ERR_NUMBER, TIVA_UDMA_ERR_IRQ_PRIORITY); nvicEnableVector(TIVA_UDMA_SW_NUMBER, TIVA_UDMA_SW_IRQ_PRIORITY); /* Enable UDMA controller.*/ - UDMA->CFG = 1; + HWREG(UDMA_CFG) = UDMA_CFG_MASTEN; /* Set address of control table.*/ - UDMA->CTLBASE = (uint32_t)udmaControlTable.primary; + HWREG(UDMA_CTLBASE) = (uint32_t)udmaControlTable.primary; } /** @@ -139,3 +147,5 @@ void udmaChannelRelease(uint8_t dmach) } #endif + +/** @} */ diff --git a/os/hal/ports/TIVA/LLD/tiva_udma.h b/os/hal/ports/TIVA/LLD/uDMA/tiva_udma.h index 6479b08..a473f6c 100644 --- a/os/hal/ports/TIVA/LLD/tiva_udma.h +++ b/os/hal/ports/TIVA/LLD/uDMA/tiva_udma.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,6 +14,14 @@ limitations under the License. */ +/** + * @file uDMA/tiva_udma.h + * @brief DMA helper driver header. + * + * @addtogroup TIVA_DMA + * @{ + */ + #ifndef TIVA_UDMA_H_ #define TIVA_UDMA_H_ @@ -22,52 +30,9 @@ /*===========================================================================*/ /** - * @name CHCTL register defines. - * @{ + * @brief CHCTL XFERSIZE helper. */ -#define UDMA_CHCTL_DSTINC_MASK 0xC0000000 -#define UDMA_CHCTL_DSTINC_0 0xC0000000 -#define UDMA_CHCTL_DSTINC_8 0x00000000 -#define UDMA_CHCTL_DSTINC_16 0x40000000 -#define UDMA_CHCTL_DSTINC_32 0x80000000 -#define UDMA_CHCTL_DSTSIZE_MASK 0x30000000 -#define UDMA_CHCTL_DSTSIZE_8 0x00000000 -#define UDMA_CHCTL_DSTSIZE_16 0x10000000 -#define UDMA_CHCTL_DSTSIZE_32 0x20000000 -#define UDMA_CHCTL_SRCINC_MASK 0x0C000000 -#define UDMA_CHCTL_SRCINC_0 0x0C000000 -#define UDMA_CHCTL_SRCINC_8 0x00000000 -#define UDMA_CHCTL_SRCINC_16 0x04000000 -#define UDMA_CHCTL_SRCINC_32 0x08000000 -#define UDMA_CHCTL_SRCSIZE_MASK 0x03000000 -#define UDMA_CHCTL_SRCSIZE_8 0x00000000 -#define UDMA_CHCTL_SRCSIZE_16 0x01000000 -#define UDMA_CHCTL_SRCSIZE_32 0x02000000 -#define UDMA_CHCTL_ARBSIZE_MASK 0x0003C000 -#define UDMA_CHCTL_ARBSIZE_1 0x00000000 -#define UDMA_CHCTL_ARBSIZE_2 0x00004000 -#define UDMA_CHCTL_ARBSIZE_4 0x00008000 -#define UDMA_CHCTL_ARBSIZE_8 0x0000C000 -#define UDMA_CHCTL_ARBSIZE_16 0x00010000 -#define UDMA_CHCTL_ARBSIZE_32 0x00014000 -#define UDMA_CHCTL_ARBSIZE_64 0x00018000 -#define UDMA_CHCTL_ARBSIZE_128 0x0001C000 -#define UDMA_CHCTL_ARBSIZE_256 0x00020000 -#define UDMA_CHCTL_ARBSIZE_512 0x00024000 -#define UDMA_CHCTL_ARBSIZE_1024 0x00028000 -#define UDMA_CHCTL_XFERSIZE_MASK 0x00003FF0 -#define UDMA_CHCTL_XFERSIZE(n) ((n-1) << 4) -#define UDMA_CHCTL_NXTUSEBURST 0x00000008 -#define UDMA_CHCTL_XFERMODE_MASK 0x00000007 -#define UDMA_CHCTL_XFERMODE_STOP 0x00000000 -#define UDMA_CHCTL_XFERMODE_BASIC 0x00000001 -#define UDMA_CHCTL_XFERMODE_AUTO 0x00000002 -#define UDMA_CHCTL_XFERMODE_PINGPONG 0x00000003 -#define UDMA_CHCTL_XFERMODE_MSG 0x00000004 -#define UDMA_CHCTL_XFERMODE_AMSG 0x00000005 -#define UDMA_CHCTL_XFERMODE_PSG 0x00000006 -#define UDMA_CHCTL_XFERMODE_APSG 0x00000007 -/** @} */ +#define UDMA_CHCTL_XFERSIZE(n) (((n)-1) << 4) /*===========================================================================*/ /* Driver pre-compile time settings. */ @@ -137,43 +102,43 @@ typedef struct __attribute__((packed, aligned(1024))) /*===========================================================================*/ #define dmaChannelEnable(dmach) {\ - UDMA->ENASET = (1 << dmach);\ + HWREG(UDMA_ENASET) = (1 << dmach);\ } #define dmaChannelDisable(dmach) { \ - UDMA->ENACLR = (1 << dmach); \ + HWREG(UDMA_ENACLR) = (1 << dmach); \ } #define dmaChannelPrimary(dmach) {\ - UDMA->ALTCLR = (1 << dmach); \ + HWREG(UDMA_ALTCLR) = (1 << dmach); \ } #define dmaChannelAlternate(dmach) { \ - UDMA->ALTSET = (1 << dmach); \ + HWREG(UDMA_ALTSET) = (1 << dmach); \ } #define dmaChannelSingleBurst(dmach) { \ - UDMA->USEBURSTCLR = (1 << dmach); \ + HWREG(UDMA_USEBURSTCLR) = (1 << dmach); \ } #define dmaChannelBurstOnly(dmach) { \ - UDMA->USEBURSTSET = (1 << dmach); \ + HWREG(UDMA_USEBURSTSET) = (1 << dmach); \ } #define dmaChannelPriorityHigh(dmach) { \ - UDMA->PRIOSET = (1 << dmach); \ + HWREG(UDMA_PRIOSET) = (1 << dmach); \ } #define dmaChannelPriorityDefault(dmach) { \ - UDMA->PRIOCLR = (1 << dmach); \ + HWREG(UDMA_PRIOCLR) = (1 << dmach); \ } #define dmaChannelEnableRequest(dmach) {\ - UDMA->REQMASKCLR = (1 << dmach); \ + HWREG(UDMA_REQMASKCLR) = (1 << dmach); \ } #define dmaChannelDisableRequest(dmach) {\ - UDMA->REQMASKSET = (1 << dmach); \ + HWREG(UDMA_REQMASKSET) = (1 << dmach); \ } /*===========================================================================*/ @@ -193,3 +158,5 @@ extern "C" { #endif #endif /* TIVA_UDMA_H_ */ + +/** @} */ diff --git a/os/hal/ports/TIVA/TM4C123x/hal_lld.c b/os/hal/ports/TIVA/TM4C123x/hal_lld.c index ddcddb3..10cd903 100644 --- a/os/hal/ports/TIVA/TM4C123x/hal_lld.c +++ b/os/hal/ports/TIVA/TM4C123x/hal_lld.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -76,60 +76,60 @@ void tiva_clock_init(void) * PLL. */ /* read */ - rcc = SYSCTL->RCC; - rcc2 = SYSCTL->RCC2; + rcc = HWREG(SYSCTL_RCC); + rcc2 = HWREG(SYSCTL_RCC2); /* modify */ - rcc |= TIVA_RCC_BYPASS; - rcc &= ~TIVA_RCC_USESYSDIV; - rcc2 |= TIVA_RCC2_BYPASS2 | TIVA_RCC2_USERCC2; + rcc |= SYSCTL_RCC_BYPASS; + rcc &= ~SYSCTL_RCC_USESYSDIV; + rcc2 |= SYSCTL_RCC2_BYPASS2 | SYSCTL_RCC2_USERCC2; /* write */ - SYSCTL->RCC = rcc; - SYSCTL->RCC2 = rcc2; + HWREG(SYSCTL_RCC) = rcc; + HWREG(SYSCTL_RCC2) = rcc2; /* 2 Select the crystal value (XTAL) and oscillator source (OSCSRC), and * clear the PWRDN bit in RCC and RCC2. Setting the XTAL field automatically * pulls valid PLL configuration data for the appropriate crystal, and * clearing the PWRDN bit powers and enables the PLL and its output. */ /* modify */ - rcc &= ~(TIVA_RCC_OSCSRC_MASK | TIVA_RCC_XTAL_MASK | TIVA_RCC_PWRDN | TIVA_RCC_MOSCDIS); - rcc |= ((TIVA_XTAL | TIVA_OSCSRC | TIVA_MOSCDIS) & (TIVA_RCC_XTAL_MASK | TIVA_RCC_OSCSRC_MASK | TIVA_RCC_MOSCDIS)); - rcc2 &= ~(TIVA_RCC2_OSCSRC2_MASK | TIVA_RCC2_PWRDN2); - rcc2 |= ((TIVA_OSCSRC | TIVA_DIV400) & (TIVA_RCC2_OSCSRC2_MASK | TIVA_RCC2_DIV400)); + rcc &= ~(SYSCTL_RCC_OSCSRC_M | SYSCTL_RCC_XTAL_M | SYSCTL_RCC_PWRDN | SYSCTL_RCC_MOSCDIS); + rcc |= ((TIVA_XTAL | TIVA_OSCSRC | TIVA_MOSCDIS) & (SYSCTL_RCC_XTAL_M | SYSCTL_RCC_OSCSRC_M | SYSCTL_RCC_MOSCDIS)); + rcc2 &= ~(SYSCTL_RCC2_OSCSRC2_M | SYSCTL_RCC2_PWRDN2); + rcc2 |= ((TIVA_OSCSRC | TIVA_DIV400) & (SYSCTL_RCC2_OSCSRC2_M | SYSCTL_RCC2_DIV400)); /* write */ - SYSCTL->RCC = rcc; - SYSCTL->RCC2 = rcc2; + HWREG(SYSCTL_RCC) = rcc; + HWREG(SYSCTL_RCC2) = rcc2; for(i = 100000; i; i--); /* 3. Select the desired system divider (SYSDIV) in RCC and RCC2 and set the * USESYSDIV bit in RCC. The SYSDIV field determines the system frequency for * the microcontroller. */ /* modify */ - rcc &= ~TIVA_RCC_SYSDIV_MASK; - rcc |= (TIVA_SYSDIV & TIVA_RCC_SYSDIV_MASK) | TIVA_USESYSDIV; - rcc2 &= ~(TIVA_RCC2_SYSDIV2_MASK | TIVA_RCC2_SYSDIV2LSB); - rcc2 |= ((TIVA_SYSDIV2 | TIVA_SYSDIV2LSB) & (TIVA_RCC2_SYSDIV2_MASK | TIVA_RCC2_SYSDIV2LSB)); + rcc &= ~SYSCTL_RCC_SYSDIV_M; + rcc |= (TIVA_SYSDIV & SYSCTL_RCC_SYSDIV_M) | SYSCTL_RCC_USESYSDIV; + rcc2 &= ~(SYSCTL_RCC2_SYSDIV2_M | SYSCTL_RCC2_SYSDIV2LSB); + rcc2 |= ((TIVA_SYSDIV2 | TIVA_SYSDIV2LSB) & (SYSCTL_RCC2_SYSDIV2_M | SYSCTL_RCC2_SYSDIV2LSB)); /* write */ - SYSCTL->RCC = rcc; - SYSCTL->RCC2 = rcc2; + HWREG(SYSCTL_RCC) = rcc; + HWREG(SYSCTL_RCC2) = rcc2; /* 4. Wait for the PLL to lock by polling the PLLLRIS bit in the Raw * Interrupt Status (RIS) register. */ - while ((SYSCTL->RIS & SYSCTL_RIS_PLLLRIS) == 0); + while ((HWREG(SYSCTL_RIS) & SYSCTL_RIS_PLLLRIS) == 0); /* 5. Enable use of the PLL by clearing the BYPASS bit in RCC and RCC2. */ - rcc &= ~TIVA_RCC_BYPASS; - rcc2 &= ~TIVA_RCC2_BYPASS2; + rcc &= ~SYSCTL_RCC_BYPASS; + rcc2 &= ~SYSCTL_RCC2_BYPASS2; rcc |= (TIVA_BYPASS_VALUE << 11); rcc2 |= (TIVA_BYPASS_VALUE << 11); - SYSCTL->RCC = rcc; - SYSCTL->RCC2 = rcc2; + HWREG(SYSCTL_RCC) = rcc; + HWREG(SYSCTL_RCC2) = rcc2; #if HAL_USE_PWM - SYSCTL->RCC |= TIVA_PWM_FIELDS; + HWREG(SYSCTL_RCC) |= TIVA_PWM_FIELDS; #endif #if defined(TIVA_UDMA_REQUIRED) diff --git a/os/hal/ports/TIVA/TM4C123x/hal_lld.h b/os/hal/ports/TIVA/TM4C123x/hal_lld.h index ec81806..5d38a67 100644 --- a/os/hal/ports/TIVA/TM4C123x/hal_lld.h +++ b/os/hal/ports/TIVA/TM4C123x/hal_lld.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -45,123 +45,6 @@ * @} */ -/** - * @name RCC register bits definitions - * @{ - */ - -#define TIVA_RCC_MOSCDIS (0x01 << 0) - -#define TIVA_RCC_OSCSRC_MASK (0x03 << 4) -#define TIVA_RCC_OSCSRC_MOSC (0x00 << 4) -#define TIVA_RCC_OSCSRC_PIOSC (0x01 << 4) -#define TIVA_RCC_OSCSRC_PIOSC_4 (0x02 << 4) -#define TIVA_RCC_OSCSRC_LFIOSC (0x03 << 4) - -#define TIVA_RCC_XTAL_MASK (0x1f << 6) -#define TIVA_RCC_XTAL_4000000 (0x06 << 6) -#define TIVA_RCC_XTAL_4096000 (0x07 << 6) -#define TIVA_RCC_XTAL_4915200 (0x08 << 6) -#define TIVA_RCC_XTAL_5000000 (0x09 << 6) -#define TIVA_RCC_XTAL_5120000 (0x0a << 6) -#define TIVA_RCC_XTAL_6000000 (0x0b << 6) -#define TIVA_RCC_XTAL_6144000 (0x0c << 6) -#define TIVA_RCC_XTAL_7372800 (0x0d << 6) -#define TIVA_RCC_XTAL_8000000 (0x0e << 6) -#define TIVA_RCC_XTAL_8192000 (0x0f << 6) -#define TIVA_RCC_XTAL_10000000 (0x10 << 6) -#define TIVA_RCC_XTAL_12000000 (0x11 << 6) -#define TIVA_RCC_XTAL_12288000 (0x12 << 6) -#define TIVA_RCC_XTAL_13560000 (0x13 << 6) -#define TIVA_RCC_XTAL_14318180 (0x14 << 6) -#define TIVA_RCC_XTAL_16000000 (0x15 << 6) -#define TIVA_RCC_XTAL_16384000 (0x16 << 6) -#define TIVA_RCC_XTAL_18000000 (0x17 << 6) -#define TIVA_RCC_XTAL_20000000 (0x18 << 6) -#define TIVA_RCC_XTAL_24000000 (0x19 << 6) -#define TIVA_RCC_XTAL_25000000 (0x1a << 6) - -#define TIVA_RCC_BYPASS (1 << 11) - -#define TIVA_RCC_PWRDN (1 << 13) - -#define TIVA_RCC_PWMDIV_MASK (0x07 << 17) -#define TIVA_RCC_PWMDIV_2 (0x00 << 17) -#define TIVA_RCC_PWMDIV_4 (0x01 << 17) -#define TIVA_RCC_PWMDIV_8 (0x02 << 17) -#define TIVA_RCC_PWMDIV_16 (0x03 << 17) -#define TIVA_RCC_PWMDIV_32 (0x04 << 17) -#define TIVA_RCC_PWMDIV_64 (0x07 << 17) - -#define TIVA_RCC_USEPWMDIV (1 << 20) - -#define TIVA_RCC_USESYSDIV (1 << 22) - -#define TIVA_RCC_SYSDIV_MASK (0x0f << 23) -#define TIVA_RCC_SYSDIV_1 (0x00 << 23) -#define TIVA_RCC_SYSDIV_2 (0x01 << 23) -#define TIVA_RCC_SYSDIV_3 (0x02 << 23) -#define TIVA_RCC_SYSDIV_4 (0x03 << 23) -#define TIVA_RCC_SYSDIV_5 (0x04 << 23) -#define TIVA_RCC_SYSDIV_6 (0x05 << 23) -#define TIVA_RCC_SYSDIV_7 (0x06 << 23) -#define TIVA_RCC_SYSDIV_8 (0x07 << 23) -#define TIVA_RCC_SYSDIV_9 (0x08 << 23) -#define TIVA_RCC_SYSDIV_10 (0x09 << 23) -#define TIVA_RCC_SYSDIV_11 (0x0a << 23) -#define TIVA_RCC_SYSDIV_12 (0x0b << 23) -#define TIVA_RCC_SYSDIV_13 (0x0c << 23) -#define TIVA_RCC_SYSDIV_14 (0x0d << 23) -#define TIVA_RCC_SYSDIV_15 (0x0e << 23) -#define TIVA_RCC_SYSDIV_16 (0x0f << 23) - -#define TIVA_RCC_ACG (1 << 27) - -/** - * @} - */ - -/** - * @name RCC2 register bits definitions - * @{ - */ - -#define TIVA_RCC2_OSCSRC2_MASK (0x07 << 4) -#define TIVA_RCC2_OSCSRC2_MOSC (0x00 << 4) -#define TIVA_RCC2_OSCSRC2_PIOSC (0x01 << 4) -#define TIVA_RCC2_OSCSRC2_PIOSC_4 (0x02 << 4) -#define TIVA_RCC2_OSCSRC2_LFIOSC (0x03 << 4) -#define TIVA_RCC2_OSCSRC2_32768 (0x07 << 4) - -#define TIVA_RCC2_BYPASS2 (1 << 11) - -#define TIVA_RCC2_PWRDN2 (1 << 13) - -#define TIVA_RCC2_USBPWRDN (1 << 14) - -#define TIVA_RCC2_SYSDIV2LSB (1 << 22) - -#define TIVA_RCC2_SYSDIV2_MASK (0x3f << 23) - -#define TIVA_RCC2_DIV400 (1 << 30) - -#define TIVA_RCC2_USERCC2 (1 << 31) - -/** - * @} - */ - -/** - * @name RIS register bits definitions - * @{ - */ - -#define SYSCTL_RIS_PLLLRIS (1 << 6) - -/** - * @} - */ - /*===========================================================================*/ /* Driver pre-compile time settings. */ /*===========================================================================*/ @@ -172,7 +55,7 @@ */ #if !defined(TIVA_OSCSRC) -#define TIVA_OSCSRC TIVA_RCC2_OSCSRC2_MOSC +#define TIVA_OSCSRC SYSCTL_RCC2_OSCSRC2_MO #endif #if !defined(TIVA_MOSC_ENABLE) @@ -217,56 +100,56 @@ /* * Oscillator-related checks. */ -#if !(TIVA_OSCSRC == TIVA_RCC2_OSCSRC2_MOSC) && \ - !(TIVA_OSCSRC == TIVA_RCC2_OSCSRC2_PIOSC) && \ - !(TIVA_OSCSRC == TIVA_RCC2_OSCSRC2_PIOSC_4) && \ - !(TIVA_OSCSRC == TIVA_RCC2_OSCSRC2_LFIOSC) && \ - !(TIVA_OSCSRC == TIVA_RCC2_OSCSRC2_32768) +#if !(TIVA_OSCSRC == SYSCTL_RCC2_OSCSRC2_MO) && \ + !(TIVA_OSCSRC == SYSCTL_RCC2_OSCSRC2_IO) && \ + !(TIVA_OSCSRC == SYSCTL_RCC2_OSCSRC2_IO4) && \ + !(TIVA_OSCSRC == SYSCTL_RCC2_OSCSRC2_30) && \ + !(TIVA_OSCSRC == SYSCTL_RCC2_OSCSRC2_32) #error "Invalid value for TIVA_OSCSRC defined" #endif #if TIVA_XTAL_VALUE == 4000000 -#define TIVA_XTAL_ (0x06 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_4MHZ #elif TIVA_XTAL_VALUE == 4096000 -#define TIVA_XTAL_ (0x07 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_4_09MHZ #elif TIVA_XTAL_VALUE == 4915200 -#define TIVA_XTAL_ (0x08 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_4_91MHZ #elif TIVA_XTAL_VALUE == 5000000 -#define TIVA_XTAL_ (0x09 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_5MHZ #elif TIVA_XTAL_VALUE == 5120000 -#define TIVA_XTAL_ (0x0a << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_5_12MHZ #elif TIVA_XTAL_VALUE == 6000000 -#define TIVA_XTAL_ (0x0b << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_6MHZ #elif TIVA_XTAL_VALUE == 6144000 -#define TIVA_XTAL_ (0x0c << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_6_14MHZ #elif TIVA_XTAL_VALUE == 7372800 -#define TIVA_XTAL_ (0x0d << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_7_37MHZ #elif TIVA_XTAL_VALUE == 8000000 -#define TIVA_XTAL_ (0x0e << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_8MHZ #elif TIVA_XTAL_VALUE == 8192000 -#define TIVA_XTAL_ (0x0f << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_8_19MHZ #elif TIVA_XTAL_VALUE == 10000000 -#define TIVA_XTAL_ (0x10 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_10MHZ #elif TIVA_XTAL_VALUE == 12000000 -#define TIVA_XTAL_ (0x11 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_12MHZ #elif TIVA_XTAL_VALUE == 12288000 -#define TIVA_XTAL_ (0x12 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_12_2MHZ #elif TIVA_XTAL_VALUE == 13560000 -#define TIVA_XTAL_ (0x13 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_13_5MHZ #elif TIVA_XTAL_VALUE == 14318180 -#define TIVA_XTAL_ (0x14 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_14_3MHZ #elif TIVA_XTAL_VALUE == 16000000 -#define TIVA_XTAL_ (0x15 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_16MHZ #elif TIVA_XTAL_VALUE == 16384000 -#define TIVA_XTAL_ (0x16 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_16_3MHZ #elif TIVA_XTAL_VALUE == 18000000 -#define TIVA_XTAL_ (0x17 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_18MHZ #elif TIVA_XTAL_VALUE == 20000000 -#define TIVA_XTAL_ (0x18 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_20MHZ #elif TIVA_XTAL_VALUE == 24000000 -#define TIVA_XTAL_ (0x19 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_24MHZ #elif TIVA_XTAL_VALUE == 25000000 -#define TIVA_XTAL_ (0x1a << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_25MHZ #else #error "Invalid value for TIVA_XTAL_VALUE defined" #endif @@ -320,7 +203,7 @@ #error "Invalid value for TIVA_BYPASS_VALUE defined" #endif -#if (TIVA_OSCSRC == TIVA_RCC_OSCSRC_MOSC) && (TIVA_MOSC_ENABLE == FALSE) +#if (TIVA_OSCSRC == SYSCTL_RCC2_OSCSRC2_MO) && (TIVA_MOSC_ENABLE == FALSE) #error "Main Oscillator selected but not enabled" #endif diff --git a/os/hal/ports/TIVA/TM4C123x/platform.mk b/os/hal/ports/TIVA/TM4C123x/platform.mk index 0abafcc..8e447ec 100644 --- a/os/hal/ports/TIVA/TM4C123x/platform.mk +++ b/os/hal/ports/TIVA/TM4C123x/platform.mk @@ -1,18 +1,33 @@ -# List of all the TM4C123x platform files. -PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/TM4C123x/hal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_st_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_pal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_serial_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_i2c_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_gpt_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_pwm_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_spi_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/tiva_udma.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_ext_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_wdg_lld.c +# Required platform files. +PLATFORMSRC := $(CHIBIOS)/os/hal/ports/common/ARMCMx/nvic.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/TM4C123x/hal_lld.c -# Required include directories -PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/TM4C123x \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD +# Required include directories. +PLATFORMINC := $(CHIBIOS)/os/hal/ports/common/ARMCMx \ + ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/TM4C123x + +ifeq ($(USE_SMART_BUILD),yes) + +# Configuration files directory +ifeq ($(CONFDIR),) + CONFDIR = . +endif + +HALCONF := $(strip $(shell cat $(CONFDIR)/halconf.h | egrep -e "\#define")) +else +endif + +# Drivers compatible with the platform. +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/ADC/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPIO/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPTM/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/I2C/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/PWM/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/SSI/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/UART/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/uDMA/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/WDT/driver.mk + +# Shared variables +ALLCSRC += $(PLATFORMSRC) +ALLINC += $(PLATFORMINC) diff --git a/os/hal/ports/TIVA/TM4C123x/tiva_isr.h b/os/hal/ports/TIVA/TM4C123x/tiva_isr.h index b380e46..f4bec51 100644 --- a/os/hal/ports/TIVA/TM4C123x/tiva_isr.h +++ b/os/hal/ports/TIVA/TM4C123x/tiva_isr.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -42,11 +42,11 @@ #define TIVA_UDMA_ERR_NUMBER 47 /* GPIO units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) \ - || defined(TM4C1232E6PM) || defined(TM4C1232H6PM) || defined(TM4C1236D5PM) \ - || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) || defined(TM4C123AE6PM) \ - || defined(TM4C123AH6PM) || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) \ + || defined(PART_TM4C1232E6PM) || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1236D5PM) \ + || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) || defined(PART_TM4C123AE6PM) \ + || defined(PART_TM4C123AH6PM) || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) #define TIVA_GPIOA_HANDLER Vector40 #define TIVA_GPIOB_HANDLER Vector44 #define TIVA_GPIOC_HANDLER Vector48 @@ -63,11 +63,11 @@ #define TIVA_GPIOF_NUMBER 30 #define TIVA_GPIOG_NUMBER 31 #endif -#if defined(TM4C1231C3PM) || defined(TM4C1231D5PM) || defined(TM4C1231E6PM) \ - || defined(TM4C1231H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233E6PM) || defined(TM4C1233H6PM) || defined(TM4C1237D5PM) \ - || defined(TM4C1237E6PM) || defined(TM4C1237H6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GH6PM) +#if defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) || defined(PART_TM4C1231E6PM) \ + || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1237D5PM) \ + || defined(PART_TM4C1237E6PM) || defined(PART_TM4C1237H6PM) || defined(PART_TM4C123BE6PM) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GH6PM) #define TIVA_GPIOA_HANDLER Vector40 #define TIVA_GPIOB_HANDLER Vector44 #define TIVA_GPIOC_HANDLER Vector48 @@ -82,11 +82,11 @@ #define TIVA_GPIOE_NUMBER 4 #define TIVA_GPIOF_NUMBER 30 #endif -#if defined(TM4C1231D5PZ) || defined(TM4C1231E6PZ) || defined(TM4C1231H6PZ) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PZ) || defined(TM4C1233H6PZ) \ - || defined(TM4C1237D5PZ) || defined(TM4C1237E6PZ) || defined(TM4C1237H6PZ) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PZ) || defined(TM4C123GE6PZ) \ - || defined(TM4C123GH6PZ) +#if defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PZ) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PZ) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PZ) \ + || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123GE6PZ) \ + || defined(PART_TM4C123GH6PZ) #define TIVA_GPIOA_HANDLER Vector40 #define TIVA_GPIOB_HANDLER Vector44 #define TIVA_GPIOC_HANDLER Vector48 @@ -111,8 +111,8 @@ #define TIVA_GPIOK_NUMBER 55 #define TIVA_GPIOL_NUMBER 56 #endif -#if defined(TM4C1231H6PGE) || defined(TM4C1233H6PGE) || defined(TM4C1237H6PGE)\ - || defined(TM4C123BH6PGE) || defined(TM4C123GH6PGE) +#if defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1237H6PGE)\ + || defined(PART_TM4C123BH6PGE) || defined(PART_TM4C123GH6PGE) #define TIVA_GPIOA_HANDLER Vector40 #define TIVA_GPIOB_HANDLER Vector44 #define TIVA_GPIOC_HANDLER Vector48 @@ -157,7 +157,7 @@ #define TIVA_GPIOP6_NUMBER 122 #define TIVA_GPIOP7_NUMBER 123 #endif -#if defined(TM4C123BH6ZRB) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C123BH6ZRB) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_GPIOA_HANDLER Vector40 #define TIVA_GPIOB_HANDLER Vector44 #define TIVA_GPIOC_HANDLER Vector48 @@ -220,23 +220,23 @@ #endif /* GPTM units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) \ + || defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) \ + || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) \ + || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_GPT0A_HANDLER Vector8C #define TIVA_GPT0B_HANDLER Vector90 #define TIVA_GPT1A_HANDLER Vector94 @@ -291,46 +291,46 @@ #endif /* WDT units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) \ + || defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) \ + || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) \ + || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_WDT_HANDLER Vector88 #define TIVA_WDT_NUMBER 18 #endif /* ADC units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) \ + || defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) \ + || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) \ + || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_ADC0_SEQ0_HANDLER Vector78 #define TIVA_ADC0_SEQ1_HANDLER Vector7C #define TIVA_ADC0_SEQ2_HANDLER Vector80 @@ -351,23 +351,23 @@ #endif /* UART units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) \ + || defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) \ + || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) \ + || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_UART0_HANDLER Vector54 #define TIVA_UART1_HANDLER Vector58 #define TIVA_UART2_HANDLER VectorC4 @@ -388,23 +388,23 @@ #endif /* SPI units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) \ + || defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) \ + || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) \ + || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_SSI0_HANDLER Vector5C #define TIVA_SSI1_HANDLER VectorC8 #define TIVA_SSI2_HANDLER Vector124 @@ -417,18 +417,18 @@ #endif /* I2C units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231D5PZ) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PZ) || defined(TM4C1232C3PM) \ - || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) || defined(TM4C1232H6PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PZ) || defined(TM4C1233H6PGE) \ - || defined(TM4C1233H6PZ) || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) \ - || defined(TM4C1236H6PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PZ) \ - || defined(TM4C1237H6PGE) || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) \ - || defined(TM4C123AH6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PZ) || defined(PART_TM4C1232C3PM) \ + || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) || defined(PART_TM4C1232H6PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PZ) || defined(PART_TM4C1233H6PGE) \ + || defined(PART_TM4C1233H6PZ) || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) \ + || defined(PART_TM4C1236H6PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PZ) \ + || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) \ + || defined(PART_TM4C123AH6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) || defined(PART_TM4C123FE6PM) \ + || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_I2C0_HANDLER Vector60 #define TIVA_I2C1_HANDLER VectorD4 #define TIVA_I2C2_HANDLER Vector150 @@ -443,11 +443,11 @@ #define TIVA_I2C4_NUMBER 109 #define TIVA_I2C5_NUMBER 110 #endif -#if defined(TM4C1231C3PM) || defined(TM4C1231D5PM) || defined(TM4C1231E6PM) \ - || defined(TM4C1231H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233E6PM) || defined(TM4C1233H6PM) || defined(TM4C1237D5PM) \ - || defined(TM4C1237E6PM) || defined(TM4C1237H6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GH6PM) +#if defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) || defined(PART_TM4C1231E6PM) \ + || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1237D5PM) \ + || defined(PART_TM4C1237E6PM) || defined(PART_TM4C1237H6PM) || defined(PART_TM4C123BE6PM) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GH6PM) #define TIVA_I2C0_HANDLER Vector60 #define TIVA_I2C1_HANDLER VectorD4 #define TIVA_I2C2_HANDLER Vector150 @@ -460,28 +460,28 @@ #endif /* CAN units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) #define TIVA_CAN0_HANDLER VectorDC #define TIVA_CAN0_NUMBER 39 #endif -#if defined(TM4C123AE6PM) || defined(TM4C123AH6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PM) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GE6PZ) \ - || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) || defined(TM4C123GH6PZ) \ - || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) || defined(PART_TM4C123BE6PM) \ + || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) || defined(PART_TM4C123BH6PM) \ + || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) || defined(PART_TM4C123FE6PM) \ + || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GE6PZ) \ + || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) || defined(PART_TM4C123GH6PZ) \ + || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_CAN0_HANDLER VectorDC #define TIVA_CAN1_HANDLER VectorE0 @@ -490,55 +490,55 @@ #endif /* USB units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PM) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) || defined(PART_TM4C123BE6PM) \ + || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) || defined(PART_TM4C123BH6PM) \ + || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) /* No interrupt handler and number.*/ #endif -#if defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) \ - || defined(TM4C123GE6PM) || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) \ - || defined(TM4C123GH6PM) || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) \ - || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) \ + || defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) \ + || defined(PART_TM4C123GH6PM) || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) \ + || defined(PART_TM4C123GH5ZXR) #define TIVA_USB0_HANDLER VectorF0 #define TIVA_USB0_NUMBER 44 #endif /* AC units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231E6PM) || defined(TM4C1231H6PM) || defined(TM4C1232C3PM) \ - || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) || defined(TM4C1232H6PM) \ - || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) || defined(TM4C1233E6PM) \ - || defined(TM4C1233H6PM) || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) \ - || defined(TM4C1236H6PM) || defined(TM4C1237D5PM) || defined(TM4C1237E6PM) \ - || defined(TM4C1237H6PM) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BH6PM) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GH6PM) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1232C3PM) \ + || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) || defined(PART_TM4C1232H6PM) \ + || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) || defined(PART_TM4C1233E6PM) \ + || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) \ + || defined(PART_TM4C1236H6PM) || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237H6PM) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) \ + || defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123FE6PM) \ + || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GH6PM) #define TIVA_AC0_HANDLER VectorA4 #define TIVA_AC1_HANDLER VectorA8 #define TIVA_AC0_NUMBER 25 #define TIVA_AC1_NUMBER 26 #endif -#if defined(TM4C1231D5PZ) || defined(TM4C1231E6PZ) || defined(TM4C1231H6PGE) \ - || defined(TM4C1231H6PZ) || defined(TM4C1233D5PZ) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PZ) || defined(TM4C1237D5PZ) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PZ) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PZ) \ - || defined(TM4C123BH6ZRB) || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE)\ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PZ) || defined(PART_TM4C1231H6PGE) \ + || defined(PART_TM4C1231H6PZ) || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PZ) || defined(PART_TM4C1237D5PZ) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PZ) \ + || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) || defined(PART_TM4C123BH6PZ) \ + || defined(PART_TM4C123BH6ZRB) || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE)\ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_AC0_HANDLER VectorA4 #define TIVA_AC1_HANDLER VectorA8 #define TIVA_AC2_HANDLER VectorAC @@ -549,26 +549,26 @@ #endif /* PWM units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) /* No interrupt handler and number.*/ #endif -#if defined(TM4C123AE6PM) || defined(TM4C123AH6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PM) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GE6PZ) \ - || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) || defined(TM4C123GH6PZ) \ - || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) || defined(PART_TM4C123BE6PM) \ + || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) || defined(PART_TM4C123BH6PM) \ + || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) || defined(PART_TM4C123FE6PM) \ + || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GE6PZ) \ + || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) || defined(PART_TM4C123GH6PZ) \ + || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_PWM0FAULT_HANDLER Vector64 #define TIVA_PWM0GEN0_HANDLER Vector68 #define TIVA_PWM0GEN1_HANDLER Vector6C @@ -593,25 +593,25 @@ #endif /* QEI units.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) /* No interrupt handler and number.*/ #endif -#if defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) \ + || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) \ + || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_QEI0_HANLDER Vector74 #define TIVA_QEI1_HANLDER VectorD8 diff --git a/os/hal/ports/TIVA/TM4C123x/tiva_registry.h b/os/hal/ports/TIVA/TM4C123x/tiva_registry.h index ac7a1d2..7604936 100644 --- a/os/hal/ports/TIVA/TM4C123x/tiva_registry.h +++ b/os/hal/ports/TIVA/TM4C123x/tiva_registry.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -29,35 +29,41 @@ /* Defined device check. */ /*===========================================================================*/ -#if !defined(TM4C1230C3PM) && !defined(TM4C1230D5PM) && \ - !defined(TM4C1230E6PM) && !defined(TM4C1230H6PM) && \ - !defined(TM4C1231C3PM) && !defined(TM4C1231D5PM) && \ - !defined(TM4C1231D5PZ) && !defined(TM4C1231E6PM) && \ - !defined(TM4C1231E6PZ) && !defined(TM4C1231H6PGE) && \ - !defined(TM4C1231H6PM) && !defined(TM4C1231H6PZ) && \ - !defined(TM4C1232C3PM) && !defined(TM4C1232D5PM) && \ - !defined(TM4C1232E6PM) && !defined(TM4C1232H6PM) && \ - !defined(TM4C1233C3PM) && !defined(TM4C1233D5PM) && \ - !defined(TM4C1233D5PZ) && !defined(TM4C1233E6PM) && \ - !defined(TM4C1233E6PZ) && !defined(TM4C1233H6PGE) && \ - !defined(TM4C1233H6PM) && !defined(TM4C1233H6PZ) && \ - !defined(TM4C1236D5PM) && !defined(TM4C1236E6PM) && \ - !defined(TM4C1236H6PM) && !defined(TM4C1237D5PM) && \ - !defined(TM4C1237D5PZ) && !defined(TM4C1237E6PM) && \ - !defined(TM4C1237E6PZ) && !defined(TM4C1237H6PGE) && \ - !defined(TM4C1237H6PM) && !defined(TM4C1237H6PZ) && \ - !defined(TM4C123AE6PM) && !defined(TM4C123AH6PM) && \ - !defined(TM4C123BE6PM) && !defined(TM4C123BE6PZ) && \ - !defined(TM4C123BH6PGE) && !defined(TM4C123BH6PM) && \ - !defined(TM4C123BH6PZ) && !defined(TM4C123BH6ZRB) && \ - !defined(TM4C123FE6PM) && !defined(TM4C123FH6PM) && \ - !defined(TM4C123GE6PM) && !defined(TM4C123GE6PZ) && \ - !defined(TM4C123GH6PGE) && !defined(TM4C123GH6PM) && \ - !defined(TM4C123GH6PZ) && !defined(TM4C123GH6ZRB) && \ - !defined(TM4C123GH5ZXR) +#if !defined(PART_TM4C1230C3PM) && !defined(PART_TM4C1230D5PM) && \ + !defined(PART_TM4C1230E6PM) && !defined(PART_TM4C1230H6PM) && \ + !defined(PART_TM4C1231C3PM) && !defined(PART_TM4C1231D5PM) && \ + !defined(PART_TM4C1231D5PZ) && !defined(PART_TM4C1231E6PM) && \ + !defined(PART_TM4C1231E6PZ) && !defined(PART_TM4C1231H6PGE) && \ + !defined(PART_TM4C1231H6PM) && !defined(PART_TM4C1231H6PZ) && \ + !defined(PART_TM4C1232C3PM) && !defined(PART_TM4C1232D5PM) && \ + !defined(PART_TM4C1232E6PM) && !defined(PART_TM4C1232H6PM) && \ + !defined(PART_TM4C1233C3PM) && !defined(PART_TM4C1233D5PM) && \ + !defined(PART_TM4C1233D5PZ) && !defined(PART_TM4C1233E6PM) && \ + !defined(PART_TM4C1233E6PZ) && !defined(PART_TM4C1233H6PGE) && \ + !defined(PART_TM4C1233H6PM) && !defined(PART_TM4C1233H6PZ) && \ + !defined(PART_TM4C1236D5PM) && !defined(PART_TM4C1236E6PM) && \ + !defined(PART_TM4C1236H6PM) && !defined(PART_TM4C1237D5PM) && \ + !defined(PART_TM4C1237D5PZ) && !defined(PART_TM4C1237E6PM) && \ + !defined(PART_TM4C1237E6PZ) && !defined(PART_TM4C1237H6PGE) && \ + !defined(PART_TM4C1237H6PM) && !defined(PART_TM4C1237H6PZ) && \ + !defined(PART_TM4C123AE6PM) && !defined(PART_TM4C123AH6PM) && \ + !defined(PART_TM4C123BE6PM) && !defined(PART_TM4C123BE6PZ) && \ + !defined(PART_TM4C123BH6PGE) && !defined(PART_TM4C123BH6PM) && \ + !defined(PART_TM4C123BH6PZ) && !defined(PART_TM4C123BH6ZRB) && \ + !defined(PART_TM4C123FE6PM) && !defined(PART_TM4C123FH6PM) && \ + !defined(PART_TM4C123GE6PM) && !defined(PART_TM4C123GE6PZ) && \ + !defined(PART_TM4C123GH6PGE) && !defined(PART_TM4C123GH6PM) && \ + !defined(PART_TM4C123GH6PZ) && !defined(PART_TM4C123GH6ZRB) && \ + !defined(PART_TM4C123GH5ZXR) #error "No valid device defined." #endif +#if !defined(TARGET_IS_TM4C123_RA1) && !defined(TARGET_IS_TM4C123_RA2) && \ + !defined(TARGET_IS_TM4C123_RA3) && !defined(TARGET_IS_TM4C123_RB0) && \ + !defined(TARGET_IS_TM4C123_RB1) +#error "No valid device revision defined." +#endif + /** * @brief Sub-family identifier. */ @@ -75,11 +81,11 @@ */ /* GPIO attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) \ - || defined(TM4C1232E6PM) || defined(TM4C1232H6PM) || defined(TM4C1236D5PM) \ - || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) || defined(TM4C123AE6PM) \ - || defined(TM4C123AH6PM) || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) \ + || defined(PART_TM4C1232E6PM) || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1236D5PM) \ + || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) || defined(PART_TM4C123AE6PM) \ + || defined(PART_TM4C123AH6PM) || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) #define TIVA_HAS_GPIOA TRUE #define TIVA_HAS_GPIOB TRUE #define TIVA_HAS_GPIOC TRUE @@ -100,11 +106,11 @@ #define TIVA_HAS_GPIOT FALSE #define TIVA_GPIO_PINS 56 #endif -#if defined(TM4C1231C3PM) || defined(TM4C1231D5PM) || defined(TM4C1231E6PM) \ - || defined(TM4C1231H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233E6PM) || defined(TM4C1233H6PM) || defined(TM4C1237D5PM) \ - || defined(TM4C1237E6PM) || defined(TM4C1237H6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GH6PM) +#if defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) || defined(PART_TM4C1231E6PM) \ + || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1237D5PM) \ + || defined(PART_TM4C1237E6PM) || defined(PART_TM4C1237H6PM) || defined(PART_TM4C123BE6PM) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GH6PM) #define TIVA_HAS_GPIOA TRUE #define TIVA_HAS_GPIOB TRUE #define TIVA_HAS_GPIOC TRUE @@ -125,11 +131,11 @@ #define TIVA_HAS_GPIOT FALSE #define TIVA_GPIO_PINS 48 #endif -#if defined(TM4C1231D5PZ) || defined(TM4C1231E6PZ) || defined(TM4C1231H6PZ) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PZ) || defined(TM4C1233H6PZ) \ - || defined(TM4C1237D5PZ) || defined(TM4C1237E6PZ) || defined(TM4C1237H6PZ) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PZ) || defined(TM4C123GE6PZ) \ - || defined(TM4C123GH6PZ) +#if defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PZ) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PZ) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PZ) \ + || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123GE6PZ) \ + || defined(PART_TM4C123GH6PZ) #define TIVA_HAS_GPIOA TRUE #define TIVA_HAS_GPIOB TRUE #define TIVA_HAS_GPIOC TRUE @@ -150,8 +156,8 @@ #define TIVA_HAS_GPIOT FALSE #define TIVA_GPIO_PINS 88 #endif -#if defined(TM4C1231H6PGE) || defined(TM4C1233H6PGE) || defined(TM4C1237H6PGE)\ - || defined(TM4C123BH6PGE) || defined(TM4C123GH6PGE) +#if defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1237H6PGE)\ + || defined(PART_TM4C123BH6PGE) || defined(PART_TM4C123GH6PGE) #define TIVA_HAS_GPIOA TRUE #define TIVA_HAS_GPIOB TRUE #define TIVA_HAS_GPIOC TRUE @@ -172,7 +178,7 @@ #define TIVA_HAS_GPIOT FALSE #define TIVA_GPIO_PINS 112 #endif -#if defined(TM4C123BH6ZRB) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C123BH6ZRB) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_HAS_GPIOA TRUE #define TIVA_HAS_GPIOB TRUE #define TIVA_HAS_GPIOC TRUE @@ -195,23 +201,23 @@ #endif /* GPTM attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) \ + || defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) \ + || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) \ + || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_HAS_GPT0 TRUE #define TIVA_HAS_GPT1 TRUE #define TIVA_HAS_GPT2 TRUE @@ -229,67 +235,67 @@ #endif /* WDT attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) \ + || defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) \ + || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) \ + || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_HAS_WDT0 TRUE #define TIVA_HAS_WDT1 TRUE #endif /* ADC attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) \ + || defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) \ + || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) \ + || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_HAS_ADC0 TRUE #define TIVA_HAS_ADC1 TRUE #endif /* UART attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) \ + || defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) \ + || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) \ + || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_HAS_UART0 TRUE #define TIVA_HAS_UART1 TRUE #define TIVA_HAS_UART2 TRUE @@ -301,23 +307,23 @@ #endif /* SPI attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) \ + || defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) \ + || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) \ + || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_HAS_SSI0 TRUE #define TIVA_HAS_SSI1 TRUE #define TIVA_HAS_SSI2 TRUE @@ -325,18 +331,18 @@ #endif /* I2C attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231D5PZ) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PZ) || defined(TM4C1232C3PM) \ - || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) || defined(TM4C1232H6PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PZ) || defined(TM4C1233H6PGE) \ - || defined(TM4C1233H6PZ) || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) \ - || defined(TM4C1236H6PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PZ) \ - || defined(TM4C1237H6PGE) || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) \ - || defined(TM4C123AH6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PZ) || defined(PART_TM4C1232C3PM) \ + || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) || defined(PART_TM4C1232H6PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PZ) || defined(PART_TM4C1233H6PGE) \ + || defined(PART_TM4C1233H6PZ) || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) \ + || defined(PART_TM4C1236H6PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PZ) \ + || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) \ + || defined(PART_TM4C123AH6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) || defined(PART_TM4C123FE6PM) \ + || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_HAS_I2C0 TRUE #define TIVA_HAS_I2C1 TRUE #define TIVA_HAS_I2C2 TRUE @@ -348,11 +354,11 @@ #define TIVA_HAS_I2C8 FALSE #define TIVA_HAS_I2C9 FALSE #endif -#if defined(TM4C1231C3PM) || defined(TM4C1231D5PM) || defined(TM4C1231E6PM) \ - || defined(TM4C1231H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233E6PM) || defined(TM4C1233H6PM) || defined(TM4C1237D5PM) \ - || defined(TM4C1237E6PM) || defined(TM4C1237H6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GH6PM) +#if defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) || defined(PART_TM4C1231E6PM) \ + || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1237D5PM) \ + || defined(PART_TM4C1237E6PM) || defined(PART_TM4C1237H6PM) || defined(PART_TM4C123BE6PM) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GH6PM) #define TIVA_HAS_I2C0 TRUE #define TIVA_HAS_I2C1 TRUE #define TIVA_HAS_I2C2 TRUE @@ -366,129 +372,129 @@ #endif /* CAN attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) #define TIVA_HAS_CAN0 TRUE #define TIVA_HAS_CAN1 FALSE #endif -#if defined(TM4C123AE6PM) || defined(TM4C123AH6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PM) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GE6PZ) \ - || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) || defined(TM4C123GH6PZ) \ - || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) || defined(PART_TM4C123BE6PM) \ + || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) || defined(PART_TM4C123BH6PM) \ + || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) || defined(PART_TM4C123FE6PM) \ + || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GE6PZ) \ + || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) || defined(PART_TM4C123GH6PZ) \ + || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_HAS_CAN0 TRUE #define TIVA_HAS_CAN1 TRUE #endif /* USB attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PM) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) || defined(PART_TM4C123BE6PM) \ + || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) || defined(PART_TM4C123BH6PM) \ + || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) #define TIVA_HAS_USB0 FALSE #endif -#if defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) \ - || defined(TM4C123GE6PM) || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) \ - || defined(TM4C123GH6PM) || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) \ - || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) \ + || defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) \ + || defined(PART_TM4C123GH6PM) || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) \ + || defined(PART_TM4C123GH5ZXR) #define TIVA_HAS_USB0 TRUE #endif /* AC attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231E6PM) || defined(TM4C1231H6PM) || defined(TM4C1232C3PM) \ - || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) || defined(TM4C1232H6PM) \ - || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) || defined(TM4C1233E6PM) \ - || defined(TM4C1233H6PM) || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) \ - || defined(TM4C1236H6PM) || defined(TM4C1237D5PM) || defined(TM4C1237E6PM) \ - || defined(TM4C1237H6PM) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) \ - || defined(TM4C123BE6PM) || defined(TM4C123BH6PM) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GH6PM) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1232C3PM) \ + || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) || defined(PART_TM4C1232H6PM) \ + || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) || defined(PART_TM4C1233E6PM) \ + || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) \ + || defined(PART_TM4C1236H6PM) || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237H6PM) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) \ + || defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123FE6PM) \ + || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GH6PM) #define TIVA_HAS_AC0 TRUE #define TIVA_HAS_AC1 TRUE #define TIVA_HAS_AC2 FALSE #endif -#if defined(TM4C1231D5PZ) || defined(TM4C1231E6PZ) || defined(TM4C1231H6PGE) \ - || defined(TM4C1231H6PZ) || defined(TM4C1233D5PZ) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PZ) || defined(TM4C1237D5PZ) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PZ) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PZ) \ - || defined(TM4C123BH6ZRB) || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE)\ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PZ) || defined(PART_TM4C1231H6PGE) \ + || defined(PART_TM4C1231H6PZ) || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PZ) || defined(PART_TM4C1237D5PZ) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PZ) \ + || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) || defined(PART_TM4C123BH6PZ) \ + || defined(PART_TM4C123BH6ZRB) || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE)\ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_HAS_AC0 TRUE #define TIVA_HAS_AC1 TRUE #define TIVA_HAS_AC2 TRUE #endif /* PWM attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) #define TIVA_HAS_PWM0 FALSE #define TIVA_HAS_PWM1 FALSE #endif -#if defined(TM4C123AE6PM) || defined(TM4C123AH6PM) || defined(TM4C123BE6PM) \ - || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) || defined(TM4C123BH6PM) \ - || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) || defined(TM4C123FE6PM) \ - || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) || defined(TM4C123GE6PZ) \ - || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) || defined(TM4C123GH6PZ) \ - || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) || defined(PART_TM4C123BE6PM) \ + || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) || defined(PART_TM4C123BH6PM) \ + || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) || defined(PART_TM4C123FE6PM) \ + || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) || defined(PART_TM4C123GE6PZ) \ + || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) || defined(PART_TM4C123GH6PZ) \ + || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_HAS_PWM0 TRUE #define TIVA_HAS_PWM1 TRUE #endif /* QEI attributes.*/ -#if defined(TM4C1230C3PM) || defined(TM4C1230D5PM) || defined(TM4C1230E6PM) \ - || defined(TM4C1230H6PM) || defined(TM4C1231C3PM) || defined(TM4C1231D5PM) \ - || defined(TM4C1231D5PZ) || defined(TM4C1231E6PM) || defined(TM4C1231E6PZ) \ - || defined(TM4C1231H6PGE) || defined(TM4C1231H6PM) || defined(TM4C1231H6PZ) \ - || defined(TM4C1232C3PM) || defined(TM4C1232D5PM) || defined(TM4C1232E6PM) \ - || defined(TM4C1232H6PM) || defined(TM4C1233C3PM) || defined(TM4C1233D5PM) \ - || defined(TM4C1233D5PZ) || defined(TM4C1233E6PM) || defined(TM4C1233E6PZ) \ - || defined(TM4C1233H6PGE) || defined(TM4C1233H6PM) || defined(TM4C1233H6PZ) \ - || defined(TM4C1236D5PM) || defined(TM4C1236E6PM) || defined(TM4C1236H6PM) \ - || defined(TM4C1237D5PM) || defined(TM4C1237D5PZ) || defined(TM4C1237E6PM) \ - || defined(TM4C1237E6PZ) || defined(TM4C1237H6PGE) || defined(TM4C1237H6PM) \ - || defined(TM4C1237H6PZ) || defined(TM4C123AE6PM) || defined(TM4C123AH6PM) +#if defined(PART_TM4C1230C3PM) || defined(PART_TM4C1230D5PM) || defined(PART_TM4C1230E6PM) \ + || defined(PART_TM4C1230H6PM) || defined(PART_TM4C1231C3PM) || defined(PART_TM4C1231D5PM) \ + || defined(PART_TM4C1231D5PZ) || defined(PART_TM4C1231E6PM) || defined(PART_TM4C1231E6PZ) \ + || defined(PART_TM4C1231H6PGE) || defined(PART_TM4C1231H6PM) || defined(PART_TM4C1231H6PZ) \ + || defined(PART_TM4C1232C3PM) || defined(PART_TM4C1232D5PM) || defined(PART_TM4C1232E6PM) \ + || defined(PART_TM4C1232H6PM) || defined(PART_TM4C1233C3PM) || defined(PART_TM4C1233D5PM) \ + || defined(PART_TM4C1233D5PZ) || defined(PART_TM4C1233E6PM) || defined(PART_TM4C1233E6PZ) \ + || defined(PART_TM4C1233H6PGE) || defined(PART_TM4C1233H6PM) || defined(PART_TM4C1233H6PZ) \ + || defined(PART_TM4C1236D5PM) || defined(PART_TM4C1236E6PM) || defined(PART_TM4C1236H6PM) \ + || defined(PART_TM4C1237D5PM) || defined(PART_TM4C1237D5PZ) || defined(PART_TM4C1237E6PM) \ + || defined(PART_TM4C1237E6PZ) || defined(PART_TM4C1237H6PGE) || defined(PART_TM4C1237H6PM) \ + || defined(PART_TM4C1237H6PZ) || defined(PART_TM4C123AE6PM) || defined(PART_TM4C123AH6PM) #define TIVA_HAS_QEI0 FALSE #define TIVA_HAS_QEI1 FALSE #endif -#if defined(TM4C123BE6PM) || defined(TM4C123BE6PZ) || defined(TM4C123BH6PGE) \ - || defined(TM4C123BH6PM) || defined(TM4C123BH6PZ) || defined(TM4C123BH6ZRB) \ - || defined(TM4C123FE6PM) || defined(TM4C123FH6PM) || defined(TM4C123GE6PM) \ - || defined(TM4C123GE6PZ) || defined(TM4C123GH6PGE) || defined(TM4C123GH6PM) \ - || defined(TM4C123GH6PZ) || defined(TM4C123GH6ZRB) || defined(TM4C123GH5ZXR) +#if defined(PART_TM4C123BE6PM) || defined(PART_TM4C123BE6PZ) || defined(PART_TM4C123BH6PGE) \ + || defined(PART_TM4C123BH6PM) || defined(PART_TM4C123BH6PZ) || defined(PART_TM4C123BH6ZRB) \ + || defined(PART_TM4C123FE6PM) || defined(PART_TM4C123FH6PM) || defined(PART_TM4C123GE6PM) \ + || defined(PART_TM4C123GE6PZ) || defined(PART_TM4C123GH6PGE) || defined(PART_TM4C123GH6PM) \ + || defined(PART_TM4C123GH6PZ) || defined(PART_TM4C123GH6ZRB) || defined(PART_TM4C123GH5ZXR) #define TIVA_HAS_QEI0 TRUE #define TIVA_HAS_QEI1 TRUE #endif diff --git a/os/hal/ports/TIVA/TM4C123x/tm4c123x.h b/os/hal/ports/TIVA/TM4C123x/tm4c123x.h deleted file mode 100644 index d64afa8..0000000 --- a/os/hal/ports/TIVA/TM4C123x/tm4c123x.h +++ /dev/null @@ -1,958 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @addtogroup CMSIS - * @{ - */ - -/** - * @addtogroup TM4C123x - * @{ - */ - -#ifndef __TM4C123x_H -#define __TM4C123x_H - -/** - * @addtogroup Configuration_section_for_CMSIS - * @{ - */ - -/** - * @brief Configuration of the Cortex-M4 Processor and Core Peripherals - */ -#define __CM4_REV 0x0001 /**< Cortex-M4 Core Revision */ -#define __MPU_PRESENT 1 /**< MPU present */ -#define __NVIC_PRIO_BITS 3 /**< Bits used for Priority Levels */ -#define __Vendor_SysTickConfig 0 /**< Use different SysTick Config */ -#define __FPU_PRESENT 1 /**< FPU present */ - -/** - * @brief TM4C123x Interrupt Number Definitions - */ -typedef enum IRQn -{ - /***** Cortex-M4 Processor Exceptions Numbers ******************************/ - NonMaskableInt_IRQn = -14, /**< Cortex-M4 Non-Maskable Interrupt */ - HardFault_IRQn = -13, /**< Cortex-M4 Hard Fault Interrupt */ - MemoryManagement_IRQn = -12, /**< Cortex-M4 Memory Management Interrupt */ - BusFault_IRQn = -11, /**< Cortex-M4 Bus Fault Interrupt */ - UsageFault_IRQn = -10, /**< Cortex-M4 Usage Fault Interrupt */ - SVCall_IRQn = -5, /**< Cortex-M4 SV Call Interrupt */ - DebugMonitor_IRQn = -4, /**< Cortex-M4 Debug Monitor Interrupt */ - PendSV_IRQn = -3, /**< Cortex-M4 Pend SV Interrupt */ - SysTick_IRQn = -1, /**< Cortex-M4 System Tick Interrupt */ - /***** TM4C123x Specific Interrupt Numbers *********************************/ - GPIOA_IRQn = 0, /**< GPIO Port A */ - GPIOB_IRQn = 1, /**< GPIO Port B */ - GPIOC_IRQn = 2, /**< GPIO Port C */ - GPIOD_IRQn = 3, /**< GPIO Port D */ - GPIOE_IRQn = 4, /**< GPIO Port E */ - UART0_IRQn = 5, /**< UART0 */ - UART1_IRQn = 6, /**< UART1 */ - SSI0_IRQn = 7, /**< SSI0 */ - I2C0_IRQn = 8, /**< I2C0 */ - PWM0FAULT_IRQn = 9, /**< PWM0 Fault */ - PWM0GEN0_IRQn = 10, /**< PWM0 Generator 0 */ - PWM0GEN1_IRQn = 11, /**< PWM0 Generator 1 */ - PWM0GEN2_IRQn = 12, /**< PWM0 Generator 2 */ - QEI0_IRQn = 13, /**< QEI0 */ - ADC0SEQ0_IRQn = 14, /**< ADC0 Sequence 0 */ - ADC0SEQ1_IRQn = 15, /**< ADC0 Sequence 1 */ - ADC0SEQ2_IRQn = 16, /**< ADC0 Sequence 2 */ - ADC0SEQ3_IRQn = 17, /**< ADC0 Sequence 3 */ - WATCHDOG_IRQn = 18, /**< Watchdog Timers 0 and 1 */ - TIMER0A_IRQn = 19, /**< 16/32-Bit Timer 0A */ - TIMER0B_IRQn = 20, /**< 16/32-Bit Timer 0B */ - TIMER1A_IRQn = 21, /**< 16/32-Bit Timer 1A */ - TIMER1B_IRQn = 22, /**< 16/32-Bit Timer 1B */ - TIMER2A_IRQn = 23, /**< 16/32-Bit Timer 2A */ - TIMER2B_IRQn = 24, /**< 16/32-Bit Timer 2B */ - ACOMP0_IRQn = 25, /**< Analog Comparator 0 */ - ACOMP1_IRQn = 26, /**< Analog Comparator 1 */ - SYSCON_IRQn = 28, /**< System Control */ - FMCEECON_IRQn = 29, /**< Flash Memory Control and EEPROM Control */ - GPIOF_IRQn = 30, /**< GPIO Port F */ - UART2_IRQn = 33, /**< UART2 */ - SSI1_IRQn = 34, /**< SSI1 */ - TIMER3A_IRQn = 35, /**< 16/32-Bit Timer 3A */ - TIMER3B_IRQn = 36, /**< 16/32-Bit Timer 3B */ - I2C1_IRQn = 37, /**< I2C1 */ - QEI1_IRQn = 38, /**< QEI1 */ - CAN0_IRQn = 39, /**< CAN0 */ - CAN1_IRQn = 40, /**< CAN1 */ - HIBMODULE_IRQn = 43, /**< Hibernation Module */ - USB_IRQn = 44, /**< USB */ - PWM0GEN3_IRQn = 45, /**< PWM0 Generator 3 */ - UDMASFW_IRQn = 46, /**< UDMA Software */ - UDMAERR_IRQn = 47, /**< UDMA Error */ - ADC1SEQ0_IRQn = 48, /**< ADC1 Sequence 0 */ - ADC1SEQ1_IRQn = 49, /**< ADC1 Sequence 1 */ - ADC1SEQ2_IRQn = 50, /**< ADC1 Sequence 2 */ - ADC1SEQ3_IRQn = 51, /**< ADC1 Sequence 3 */ - SSI2_IRQn = 57, /**< SSI2 */ - SSI3_IRQn = 58, /**< SSI3 */ - UART3_IRQn = 59, /**< UART3 */ - UART4_IRQn = 60, /**< UART4 */ - UART5_IRQn = 61, /**< UART5 */ - UART6_IRQn = 62, /**< UART6 */ - UART7_IRQn = 63, /**< UART7 */ - I2C2_IRQn = 68, /**< I2C2 */ - I2C3_IRQn = 69, /**< I2C3 */ - TIMER4A_IRQn = 70, /**< 16/32-Bit Timer 4A */ - TIMER4B_IRQn = 71, /**< 16/32-Bit Timer 4B */ - TIMER5A_IRQn = 92, /**< 16/32-Bit Timer 5A */ - TIMER5B_IRQn = 93, /**< 16/32-Bit Timer 5B */ - WTIMER0A_IRQn = 94, /**< 32/64-Bit Timer 0A */ - WTIMER0B_IRQn = 95, /**< 32/64-Bit Timer 0B */ - WTIMER1A_IRQn = 96, /**< 32/64-Bit Timer 1A */ - WTIMER1B_IRQn = 97, /**< 32/64-Bit Timer 1B */ - WTIMER2A_IRQn = 98, /**< 32/64-Bit Timer 2A */ - WTIMER2B_IRQn = 99, /**< 32/64-Bit Timer 2B */ - WTIMER3A_IRQn = 100, /**< 32/64-Bit Timer 3A */ - WTIMER3B_IRQn = 101, /**< 32/64-Bit Timer 3B */ - WTIMER4A_IRQn = 102, /**< 32/64-Bit Timer 4A */ - WTIMER4B_IRQn = 103, /**< 32/64-Bit Timer 4B */ - WTIMER5A_IRQn = 104, /**< 32/64-Bit Timer 5A */ - WTIMER5B_IRQn = 105, /**< 32/64-Bit Timer 5B */ - SYSEXCEPT_IRQn = 106, /**< System Exception (imprecise) */ - PWM1GEN0_IRQn = 134, /**< PWM1 Generator 0 */ - PWM1GEN1_IRQn = 135, /**< PWM1 Generator 1 */ - PWM1GEN2_IRQn = 136, /**< PWM1 Generator 2 */ - PWM1GEN3_IRQn = 137, /**< PWM1 Generator 3 */ - PWM1FAULT_IRQn = 138 /**< PWM1 Fault */ -} IRQn_Type; - -/** - * @} - */ - -#include "core_cm4.h" /* Cortex-M4 processor and core peripherals.*/ -#include <stdint.h> - -/** - * @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog Comparator - */ -typedef struct -{ - __IO uint32_t MIS; /**< Masked Interrupt Status */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t INTEN; /**< Interrupt Enable */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t REFCTL; /**< Reference Voltage Control */ - __I uint32_t _RESERVED1[3]; /**< Reserved */ - __I uint32_t STAT0; /**< Status 0 */ - __IO uint32_t CTL0; /**< Control 0 */ - __I uint32_t _RESERVED2[6]; /**< Reserved */ - __I uint32_t STAT1; /**< Status 1 */ - __IO uint32_t CTL1; /**< Control 1 */ - __I uint32_t _RESERVED3[990];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ -} ACMP_TypeDef; - -/** - * @brief Analog-to-Digital Converter - */ -typedef struct -{ - __IO uint32_t MUX; /**< Sample Sequence Input Multiplexer - Select */ - __IO uint32_t CTL; /**< Sample Sequence Control */ - __I uint32_t FIFO; /**< Sample Sequence Result FIFO */ - __I uint32_t FSTAT; /**< Sample Sequence FIFO Status */ - __IO uint32_t OP; /**< Sample Sequence Operation */ - __IO uint32_t DC; /**< Sample Sequence Digital Comparator - Select */ - __I uint32_t _RESERVED0[2]; /**< Reserved */ -} ADC_SS_t; - -typedef struct -{ - __IO uint32_t ACTSS; /**< Active Sample Sequencer */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t IM; /**< Interrupt Mask */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ - __IO uint32_t OSTAT; /**< Overflow Status */ - __IO uint32_t EMUX; /**< Event Multiplexer Select */ - __IO uint32_t USTAT; /**< Underflow Status */ - __IO uint32_t TSSEL; /**< Trigger Source Select */ - __IO uint32_t SSPRI; /**< Sample Sequencer Priority */ - __IO uint32_t SPC; /**< Sample Phase Control */ - __IO uint32_t PSSI; /**< Processor Sample Sequence Initiate */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t SAC; /**< Sample Averaging Control */ - __IO uint32_t DCISC; /**< Digital Comparator Interrupt Status and - Clear */ - __IO uint32_t CTL; /**< Control */ - __I uint32_t _RESERVED1[1]; /**< Reserved */ - ADC_SS_t SS[4]; /**< Sample Sequence 0, 1, 2 and 3 */ - __I uint32_t _RESERVED2[784];/**< Reserved */ - __O uint32_t DCRIC; /**< Digital Comparator Reset Initial - Conditions */ - __I uint32_t _RESERVED3[63]; /**< Reserved */ - __IO uint32_t DCCTL[8]; /**< Digital Comparator Control 0 - 7 */ - __I uint32_t _RESERVED4[8]; /**< Reserved */ - __IO uint32_t DCCMP[8]; /**< Digital Comparator Range 0 - 7 */ - __I uint32_t _RESERVED5[88]; /**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ - __IO uint32_t PC; /**< Peripheral Configuration */ - __IO uint32_t CC; /**< Clock Configuration */ -} ADC_TypeDef; - -/** - * @brief Controller Area Network - */ -typedef struct -{ - __IO uint32_t CRQ; /**< Command Request */ - __IO uint32_t CMSK; /**< Command Mask */ - __IO uint32_t MSK[2]; /**< Mask 1 and 2 */ - __IO uint32_t ARB[2]; /**< Arbitration 1 and 2 */ - __IO uint32_t MCTL; /**< Message Control */ - __IO uint32_t DA[2]; /**< Data A1 and A2 */ - __IO uint32_t DB[2]; /**< Data B1 and B2 */ - __I uint32_t _RESERVED0[13]; /**< Reserved */ -} CAN_INTERFACE_t; - -typedef struct -{ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t STS; /**< Status */ - __I uint32_t ERR; /**< Error Counter */ - __IO uint32_t BIT; /**< Bit Timing */ - __I uint32_t INT; /**< Interrupt */ - __IO uint32_t TST; /**< Test */ - __IO uint32_t BRPE; /**< Baud Rate Prescaler Extension */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - CAN_INTERFACE_t IF[2]; /**< IF1 and IF2 */ - __I uint32_t _RESERVED1[8]; /**< Reserved */ - __I uint32_t TXRQ[2]; /**< Transmission Request 1 and 2 */ - __I uint32_t _RESERVED2[6]; /**< Reserved */ - __I uint32_t NWDA[2]; /**< New Data 1 and 2 */ - __I uint32_t _RESERVED3[6]; /**< Reserved */ - __I uint32_t MSGINT[2]; /**< Message 1 and 2 Interrupt Pending */ - __I uint32_t _RESERVED4[6]; /**< Reserved */ - __I uint32_t MSGVAL[2]; /**< Message 1 and 2 Valid */ -} CAN_TypeDef; - -/** - * @brief EEPROM Memory - */ -typedef struct -{ - __IO uint32_t EESIZE; /**< Size Information */ - __IO uint32_t EEBLOCK; /**< Current Block */ - __IO uint32_t EEOFFSET; /**< Current Offset */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t EERDWR; /**< Read-Write */ - __IO uint32_t EERDWRINC; /**< Read-Write with Increment */ - __IO uint32_t EEDONE; /**< Done Status */ - __IO uint32_t EESUPP; /**< Support Control and Status */ - __IO uint32_t EEUNLOCK; /**< Unlock */ - __I uint32_t _RESERVED1[3]; /**< Reserved */ - __IO uint32_t EEPROT; /**< Protection */ - __IO uint32_t EEPASS[3]; /**< Password */ - __IO uint32_t EEINT; /**< Interrupt */ - __I uint32_t _RESERVED2[3]; /**< Reserved */ - __IO uint32_t EEHIDE; /**< Block Hide */ - __I uint32_t _RESERVED3[11]; /**< Reserved */ - __IO uint32_t EEDBGME; /**< Debug Mass Erase */ - __I uint32_t _RESERVED4[975];/**< Reserved */ - __IO uint32_t EEPROMPP; /**< Peripheral Properties */ -} EEPROM_TypeDef; - -/** - * @brief Flash Memory - */ -typedef struct -{ - __IO uint32_t FMA; /**< Flash Memory Address */ - __IO uint32_t FMD; /**< Flash Memory Data */ - __IO uint32_t FMC; /**< Flash Memory Control */ - __I uint32_t FCRIS; /**< Flash Controller Raw Interrupt Status */ - __IO uint32_t FCIM; /**< Flash Controller Interrupt Mask */ - __IO uint32_t FCMISC; /**< Masked Interrupt Status and Clear */ - __I uint32_t _RESERVED0[2]; /**< Reserved */ - __IO uint32_t FMC2; /**< Flash Memory Control 2 */ - __I uint32_t _RESERVED1[3]; /**< Reserved */ - __IO uint32_t FWBVAL; /**< Flash Write Buffer Valid */ - __I uint32_t _RESERVED2[51]; /**< Reserved */ - __IO uint32_t FWBN; /**< Flash Write Buffer n */ - __I uint32_t _RESERVED3[943];/**< Reserved */ - __I uint32_t FSIZE; /**< Flash Size */ - __I uint32_t SSIZE; /**< SRAM Size */ - __I uint32_t _RESERVED4[1]; /**< Reserved */ - __IO uint32_t ROMSWMAP; /**< ROM Software Map */ -} FLASH_TypeDef; - -/** - * @brief General Purpose Input/Outputs - */ -typedef struct -{ - union { - __IO uint32_t MASKED_ACCESS[256]; /**< Masked access of Data Register */ - struct { - __I uint32_t _RESERVED0[255]; /**< Reserved */ - __IO uint32_t DATA; /**< Data */ - }; - }; - __IO uint32_t DIR; /**< Direction */ - __IO uint32_t IS; /**< Interrupt Sense */ - __IO uint32_t IBE; /**< Interrupt Both Edges */ - __IO uint32_t IEV; /**< Interrupt Event */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t AFSEL; /**< Alternate Function Select */ - __I uint32_t _RESERVED1[55]; /**< Reserved */ - __IO uint32_t DR2R; /**< 2-mA Drive Select */ - __IO uint32_t DR4R; /**< 4-mA Drive Select */ - __IO uint32_t DR8R; /**< 8-mA Drive Select */ - __IO uint32_t ODR; /**< Open Drain Select */ - __IO uint32_t PUR; /**< Pull-Up Select */ - __IO uint32_t PDR; /**< Pull-Down Select */ - __IO uint32_t SLR; /**< Slew Rate Control Select */ - __IO uint32_t DEN; /**< Digital Enable */ - __IO uint32_t LOCK; /**< Lock */ - __IO uint32_t CR; /**< Commit */ - __IO uint32_t AMSEL; /**< Analog Mode Select */ - __IO uint32_t PCTL; /**< Port Control */ - __IO uint32_t ADCCTL; /**< ADC Control */ - __IO uint32_t DMACTL; /**< DMA Control */ -} GPIO_TypeDef; - -/** - * @brief General Purpose Timer - */ -typedef struct -{ - __IO uint32_t CFG; /**< Configuration */ - __IO uint32_t TAMR; /**< Timer A Mode */ - __IO uint32_t TBMR; /**< Timer B Mode */ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t SYNC; /**< Synchronize */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t IMR; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t TAILR; /**< Timer A Interval Load */ - __IO uint32_t TBILR; /**< Timer B Interval Load */ - __IO uint32_t TAMATCHR; /**< Timer A Match */ - __IO uint32_t TBMATCHR; /**< Timer B Match */ - __IO uint32_t TAPR; /**< Timer A Prescale */ - __IO uint32_t TBPR; /**< Timer B Prescale */ - __IO uint32_t TAPMR; /**< Timer A Prescale Match */ - __IO uint32_t TBPMR; /**< Timer B Prescale Match */ - __I uint32_t TAR; /**< Timer A */ - __I uint32_t TBR; /**< Timer B */ - __IO uint32_t TAV; /**< Timer A Value */ - __IO uint32_t TBV; /**< Timer B Value */ - __I uint32_t RTCPD; /**< RTC Predivide */ - __I uint32_t TAPS; /**< Timer A Prescale Snapshot */ - __I uint32_t TBPS; /**< Timer B Prescale Snapshot */ - __I uint32_t TAPV; /**< Timer A Prescale Value */ - __I uint32_t TBPV; /**< Timer B Prescale Value */ - __I uint32_t _RESERVED1[981];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ -} GPT_TypeDef; - -/** - * @brief Hibernation Module - */ -typedef struct -{ - __I uint32_t RTCC; /**< RTC Counter */ - __IO uint32_t RTCM0; /**< RTC Match 0 */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t RTCLD; /**< RTC Load */ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __IO uint32_t IC; /**< Interrupt Clear */ - __IO uint32_t RTCT; /**< RTC Trim */ - __IO uint32_t RTCSS; /**< RTC Sub Seconds */ - __I uint32_t _RESERVED1[1]; /**< Reserved */ - __IO uint32_t DATA; /**< Data */ -} HIB_TypeDef; - -/** - * @brief Inter-Integrated Circuit - */ -typedef struct -{ - __IO uint32_t MSA; /**< Master Slave Address */ - __IO uint32_t MCS; /**< Master Control/Status */ - __IO uint32_t MDR; /**< Master Data */ - __IO uint32_t MTPR; /**< Master Timer Period */ - __IO uint32_t MIMR; /**< Master Interrupt Mask */ - __I uint32_t MRIS; /**< Master Raw Interrupt Status */ - __IO uint32_t MMIS; /**< Master Masked Interrupt Status */ - __O uint32_t MICR; /**< Master Interrupt Clear */ - __IO uint32_t MCR; /**< Master Configuration */ - __IO uint32_t MCLKOCNT; /**< Master Clock Low Timeout Count */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __I uint32_t MBMON; /**< Master Bus Monitor */ - __IO uint32_t MCR2; /**< Master Configuration 2 */ - __I uint32_t _RESERVED1[497];/**< Reserved */ - __IO uint32_t SOAR; /**< Slave Own Address */ - __IO uint32_t SCSR; /**< Slave Control/Status */ - __IO uint32_t SDR; /**< Slave Data */ - __IO uint32_t SIMR; /**< Slave Interrupt Mask */ - __I uint32_t SRIS; /**< Slave Raw Interrupt Status */ - __I uint32_t SMIS; /**< Slave Masked Interrupt Status */ - __O uint32_t SICR; /**< Slave Interrupt Clear */ - __IO uint32_t SOAR2; /**< Slave Own Address 2 */ - __IO uint32_t SACKCTL; /**< Slave ACK Control */ - __I uint32_t _RESERVED2[487];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ - __I uint32_t PC; /**< Peripheral Configuration */ -} I2C_TypeDef; - -/* - * @brief Pulse Width Modulator - */ -typedef struct -{ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t INTEN; /**< Interrupt and Trigger Enable */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ - __IO uint32_t LOAD; /**< Load */ - __I uint32_t COUNT; /**< Counter */ - __IO uint32_t CMP[2]; /**< Compare A, B */ - __IO uint32_t GEN[2]; /**< Generator A, B Control */ - __IO uint32_t DBCTL; /**< Dead-Band Control */ - __IO uint32_t DBRISE; /**< Dead-Band Rising-Edge Delay */ - __IO uint32_t DBFALL; /**< Dead-Band Falling-Edge Delay */ - __IO uint32_t FLTSRC[2]; /**< Fault Source 0, 1 */ - __IO uint32_t MINFLTPER; /**< Minimum Fault Period */ -} PWM_GENERATOR_T; - -typedef struct -{ - union { - __IO uint32_t SEN; /**< Fault Pin Logic Sense, for GEN 0 and 1 */ - __I uint32_t _RESERVED0[1];/**< Reserved, for GEN 2 and 3 */ - }; - __IO uint32_t STAT[2]; /**< Fault Status */ - __I uint32_t _RESERVED1[29]; /**< Reserved */ -} PWM_FLT_t; - -typedef struct -{ - __IO uint32_t CTL; /**< Master Control */ - __IO uint32_t SYNC; /**< Time Base Sync */ - __IO uint32_t ENABLE; /**< Output Enable */ - __IO uint32_t INVERT; /**< Output Inversion */ - __IO uint32_t FAULT; /**< Output Fault */ - __IO uint32_t INTEN; /**< Interrupt Enable */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ - __I uint32_t STATUS; /**< Status */ - __IO uint32_t FAULTVAL; /**< Fault Condition Value */ - __IO uint32_t ENUPD; /**< Enable Update */ - __I uint32_t _RESERVED0[5]; /**< Reserved */ - __IO PWM_GENERATOR_T PWM[4]; /**< PWM Generator 0, 1, 2 and 3 */ - __I uint32_t _RESERVED1[432];/**< Reserved */ - PWM_FLT_t FLT[4]; /**< Fault registers 0, 1, 2 and 3 */ - __I uint32_t _RESERVED2[368];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ -} PWM_TypeDef; - -/** - * @brief Quadrature Encoder Interface - */ -typedef struct -{ - __IO uint32_t CTL; /**< Control */ - __I uint32_t STAT; /**< Status */ - __IO uint32_t POS; /**< Position */ - __IO uint32_t MAXPOS; /**< Maximum Position */ - __IO uint32_t LOAD; /**< Timer Load */ - __I uint32_t TIME; /**< Timer */ - __I uint32_t COUNT; /**< Velocity Counter */ - __I uint32_t SPEED; /**< Velocity */ - __IO uint32_t INTEN; /**< Interrupt Enable */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ -} QEI_TypeDef; - -/** - * @brief Synchronous Serial Interface - */ -typedef struct -{ - __IO uint32_t CR0; /**< Control 0 */ - __IO uint32_t CR1; /**< Control 1 */ - __IO uint32_t DR; /**< Data */ - __I uint32_t SR; /**< Status */ - __IO uint32_t CPSR; /**< Clock Prescale */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t DMACTL; /**< DMA Control */ - __I uint32_t _RESERVED0[1000];/**< Reserved */ - __IO uint32_t CC; /**< Clock Configuration */ -} SSI_TypeDef; - -/** - * @brief System Control - */ -typedef struct -{ - __I uint32_t DID0; /**< Device Identification 0 */ - __I uint32_t DID1; /**< Device Identification 1 */ - __I uint32_t RESERVED0[10]; /**< Reserved */ - __IO uint32_t PBORCTL; /**< Brown-Out Reset Control */ - __I uint32_t RESERVED1[7]; /**< Reserved */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t IMC; /**< Interrupt Mask Control */ - __IO uint32_t MISC; /**< Interrupt Status and Clear */ - __IO uint32_t RESC; /**< Reset Cause */ - __IO uint32_t RCC; /**< Run-Mode Clock Configuration */ - __I uint32_t RESERVED2[2]; /**< Reserved */ - __IO uint32_t GPIOHBCTL; /**< GPIO High-Performance Bus Control */ - __IO uint32_t RCC2; /**< Run-Mode Clock Configuration 2 */ - __I uint32_t RESERVED3[2]; /**< Reserved */ - __IO uint32_t MOSCCTL; /**< Main Oscillator Control */ - __I uint32_t RESERVED4[49]; /**< Reserved */ - __IO uint32_t DSLPCLKCFG; /**< Deep Sleep Clock Configuration */ - __I uint32_t RESERVED5[1]; /**< Reserved */ - __I uint32_t SYSPROP; /**< System Properties */ - __IO uint32_t PIOSCCAL; /**< PIOSC Calibration */ - __I uint32_t PIOSCSTAT; /**< PIOSC Statistics */ - __I uint32_t RESERVED6[2]; /**< Reserved */ - __I uint32_t PLLFREQ0; /**< PLL Frequency 0 */ - __I uint32_t PLLFREQ1; /**< PLL Frequency 1 */ - __I uint32_t PLLSTAT; /**< PLL Frequency Status */ - __I uint32_t RESERVED7[7]; /**< Reserved */ - __IO uint32_t SLPPWRCFG; /**< Sleep Power Configuration */ - __IO uint32_t DSLPPWRCFG; /**< Deep-Sleep Power Configuration */ - __I uint32_t RESERVED8[9]; /**< Reserved */ - __IO uint32_t LDOSPCTL; /**< LDO Sleep Power Control */ - __I uint32_t LDOSPCAL; /**< LDO Sleep Power Calibration */ - __IO uint32_t LDODPCTL; /**< LDO Deep-Sleep Power Control */ - __I uint32_t LDODPCAL; /**< LDO Deep-Sleep Power Calibration */ - __I uint32_t RESERVED9[2]; /**< Reserved */ - __I uint32_t SDPMST; /**< Sleep/Deep-Sleep Power Mode Status */ - __I uint32_t RESERVED10[76]; /**< Reserved */ - __I uint32_t PPWD; /**< WDT Peripheral Present */ - __I uint32_t PPTIMER; /**< GPT Peripheral Present */ - __I uint32_t PPGPIO; /**< GPIO Peripheral Present */ - __I uint32_t PPDMA; /**< UDMA Peripheral Present */ - __I uint32_t RESERVED11[1]; /**< Reserved */ - __I uint32_t PPHIB; /**< HIB Peripheral Present */ - __I uint32_t PPUART; /**< UART Peripheral Present */ - __I uint32_t PPSSI; /**< SSI Peripheral Present */ - __I uint32_t PPI2C; /**< I2C Peripheral Present */ - __I uint32_t RESERVED12[1]; /**< Reserved */ - __I uint32_t PPUSB; /**< USB Peripheral Present */ - __I uint32_t RESERVED13[2]; /**< Reserved */ - __I uint32_t PPCAN; /**< CAN Peripheral Present */ - __I uint32_t PPADC; /**< ADC Peripheral Present */ - __I uint32_t PPACMP; /**< ACMP Peripheral Present */ - __I uint32_t PPPWM; /**< PWM Peripheral Present */ - __I uint32_t PPQEI; /**< QEI Peripheral Present */ - __I uint32_t RESERVED14[4]; /**< Reserved */ - __I uint32_t PPEEPROM; /**< EEPROM Peripheral Present */ - __I uint32_t PPWTIMER; /**< Wide GPT Peripheral Present */ - __I uint32_t RESERVED15[104];/**< Reserved */ - __IO uint32_t SRWD; /**< WDT Software Reset */ - __IO uint32_t SRTIMER; /**< GPT Software Reset */ - __IO uint32_t SRGPIO; /**< GPIO Software Reset */ - __IO uint32_t SRDMA; /**< UDMA Software Reset */ - __I uint32_t RESERVED16[1]; /**< Reserved */ - __IO uint32_t SRHIB; /**< HIB Software Reset */ - __IO uint32_t SRUART; /**< UART Software Reset */ - __IO uint32_t SRSSI; /**< SSI Software Reset */ - __IO uint32_t SRI2C; /**< I2C Software Reset */ - __I uint32_t RESERVED17[1]; /**< Reserved */ - __IO uint32_t SRUSB; /**< USB Software Reset */ - __I uint32_t RESERVED18[2]; /**< Reserved */ - __IO uint32_t SRCAN; /**< CAN Software Reset */ - __IO uint32_t SRADC; /**< ADC Software Reset */ - __IO uint32_t SRACMP; /**< ACMP Software Reset */ - __IO uint32_t SRPWM; /**< PWM Software Reset */ - __IO uint32_t SRQEI; /**< QEI Software Reset */ - __I uint32_t RESERVED19[4]; /**< Reserved */ - __IO uint32_t SREEPROM; /**< EEPROM Software Reset */ - __IO uint32_t SRWTIMER; /**< Wide GPT Software Reset */ - __I uint32_t RESERVED20[40]; /**< Reserved */ - __IO uint32_t RCGCWD; /**< WDT Run Mode Clock Gating Control */ - __IO uint32_t RCGCTIMER; /**< GPT Run Mode Clock Gating Control */ - __IO uint32_t RCGCGPIO; /**< GPIO Run Mode Clock Gating Control */ - __IO uint32_t RCGCDMA; /**< UDMA Run Mode Clock Gating Control */ - __I uint32_t RESERVED21[1]; /**< Reserved */ - __IO uint32_t RCGCHIB; /**< HIB Run Mode Clock Gating Control */ - __IO uint32_t RCGCUART; /**< UART Run Mode Control */ - __IO uint32_t RCGCSSI; /**< SSI Run Mode Clock Gating Control */ - __IO uint32_t RCGCI2C; /**< I2C Run Mode Clock Gating Control */ - __I uint32_t RESERVED22[1]; /**< Reserved */ - __IO uint32_t RCGCUSB; /**< USB Run Mode Clock Gating Control */ - __I uint32_t RESERVED23[2]; /**< Reserved */ - __IO uint32_t RCGCCAN; /**< CAN Run Mode Clock Gating Control */ - __IO uint32_t RCGCADC; /**< ADC Run Mode Clock Gating Control */ - __IO uint32_t RCGCACMP; /**< ACMP Run Mode Clock Gating Control */ - __IO uint32_t RCGCPWM; /**< PWM Run Mode Clock Gating Control */ - __IO uint32_t RCGCQEI; /**< QEI Run Mode Clock Gating Control */ - __I uint32_t RESERVED24[4]; /**< Reserved */ - __IO uint32_t RCGCEEPROM; /**< EEPROM Run Mode Clock Gating Control */ - __IO uint32_t RCGCWTIMER; /**< Wide GPT Run Mode Clock Gating Control */ - __I uint32_t RESERVED25[40]; /**< Reserved */ - __IO uint32_t SCGCWD; /**< WDT Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCTIMER; /**< GPT Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCGPIO; /**< GPIO Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCDMA; /**< UDMA Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED26[1]; /**< Reserved */ - __IO uint32_t SCGCHIB; /**< HIB Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCUART; /**< UART Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCSSI; /**< SSI Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCI2C; /**< I2C Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED27[1]; /**< Reserved */ - __IO uint32_t SCGCUSB; /**< USB Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED28[2]; /**< Reserved */ - __IO uint32_t SCGCCAN; /**< CAN Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCADC; /**< ADC Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCACMP; /**< ACMP Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCPWM; /**< PWM Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCQEI; /**< QEI Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED29[4]; /**< Reserved */ - __IO uint32_t SCGCEEPROM; /**< EEPROM Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCWTIMER; /**< Wide GPT Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED30[40]; /**< Reserved */ - __IO uint32_t DCGCWD; /**< WDT Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCTIMER; /**< GPT Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCGPIO; /**< GPIO Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCDMA; /**< UDMA Deep-Sleep Mode Clock Gating - Control */ - __I uint32_t RESERVED31[1]; /**< Reserved */ - __IO uint32_t DCGCHIB; /**< HIB Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCUART; /**< UART Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCSSI; /**< SSI Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCI2C; /**< I2C Deep-Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED32[1]; /**< Reserved */ - __IO uint32_t DCGCUSB; /**< USB Deep-Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED33[2]; /**< Reserved */ - __IO uint32_t DCGCCAN; /**< CAN Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCADC; /**< ADC Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCACMP; /**< ACMP Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCPWM; /**< PWM Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCQEI; /**< QEI Deep-Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED34[4]; /**< Reserved */ - __IO uint32_t DCGCEEPROM; /**< EEPROM Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCWTIMER; /**< Wide GPT Deep-Sleep Mode Clock Gating - Control */ - __I uint32_t RESERVED35[104];/**< Reserved */ - __IO uint32_t PRWD; /**< WDT Peripheral Ready */ - __IO uint32_t PRTIMER; /**< GPT Peripheral Ready */ - __IO uint32_t PRGPIO; /**< GPIO Peripheral Ready */ - __IO uint32_t PRDMA; /**< UDMA Peripheral Ready */ - __I uint32_t RESERVED36[1]; /**< Reserved */ - __IO uint32_t PRHIB; /**< HIB Peripheral Ready */ - __IO uint32_t PRUART; /**< UART Peripheral Ready */ - __IO uint32_t PRSSI; /**< SSI Peripheral Ready */ - __IO uint32_t PRI2C; /**< I2C Peripheral Ready */ - __I uint32_t RESERVED37[1]; /**< Reserved */ - __IO uint32_t PRUSB; /**< USB Peripheral Ready */ - __I uint32_t RESERVED38[2]; /**< Reserved */ - __IO uint32_t PRCAN; /**< CAN Peripheral Ready */ - __IO uint32_t PRADC; /**< ADC Peripheral Ready */ - __IO uint32_t PRACMP; /**< ACMP Peripheral Ready */ - __IO uint32_t PRPWM; /**< PWM Peripheral Ready */ - __IO uint32_t PRQEI; /**< QEI Peripheral Ready */ - __I uint32_t RESERVED39[4]; /**< Reserved */ - __IO uint32_t PREEPROM; /**< EEPROM Peripheral Ready */ - __IO uint32_t PRWTIMER; /**< Wide GPT Peripheral Ready */ -} SYSCTL_TypeDef; - -/** - * @brief Universal Asynchronous Receiver/Transmitter - */ -typedef struct -{ - __IO uint32_t DR; /**< Data */ - union { - __I uint32_t RSR; /**< Receive Status */ - __O uint32_t ECR; /**< Error Clear */ - }; - __I uint32_t _RESERVED0[4]; /**< Reserved */ - __I uint32_t FR; /**< Flag */ - __I uint32_t _RESERVED1[1]; /**< Reserved */ - __IO uint32_t ILPR; /**< IrDA Low-Power Register */ - __IO uint32_t IBRD; /**< Integer Baud-Rate Divisor */ - __IO uint32_t FBRD; /**< Fractional Baud-Rate Divisor */ - __IO uint32_t LCRH; /**< Line Control */ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t IFLS; /**< Interrupt FIFO Level Select */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t DMACTL; /**< DMA Control */ - __I uint32_t _RESERVED2[22]; /**< Reserved */ - __IO uint32_t BIT9ADDR; /**< 9-Bit Self Address */ - __IO uint32_t BIT9AMASK; /**< 9-Bit Self Address Mask */ - __I uint32_t _RESERVED3[965];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ - __I uint32_t _RESERVED4[1]; /**< Reserved */ - __IO uint32_t CC; /**< Clock Configuration */ -} UART_TypeDef; - -/** - * @brief Micro Direct Memory Access - */ -typedef struct -{ - __IO uint32_t SET; /**< Set */ - __O uint32_t CLR; /**< Clear */ -} UDMA_SC_t; - -typedef struct -{ - __IO uint32_t STAT; /**< Status */ - __O uint32_t CFG; /**< Configuration */ - __IO uint32_t CTLBASE; /**< Channel Control Base Pointer */ - __IO uint32_t ALTBASE; /**< Alternate Channel Control Base Pointer */ - __IO uint32_t WAITSTAT; /**< Channel Wait-on-Request Status */ - __O uint32_t SWREQ; /**< Channel Software Request */ - __IO uint32_t USEBURSTSET; /**< Channel Useburst Set */ - __O uint32_t USEBURSTCLR; /**< Channel Useburst Clear */ - __IO uint32_t REQMASKSET; /**< Channel Request Mask Set */ - __O uint32_t REQMASKCLR; /**< Channel Request Mask Clear */ - __IO uint32_t ENASET; /**< Channel Enable Set */ - __O uint32_t ENACLR; /**< Channel Enable Clear */ - __IO uint32_t ALTSET; /**< Channel Primary Alternate Set */ - __O uint32_t ALTCLR; /**< Channel Primary Alternate Clear */ - __IO uint32_t PRIOSET; /**< Channel Priority Set */ - __O uint32_t PRIOCLR; /**< Channel Priority Clear */ - __I uint32_t _RESERVED0[3]; /**< Reserved */ - __IO uint32_t ERRCLR; /**< Bus Error Clear */ - __I uint32_t _RESERVED1[300];/**< Reserved */ - __IO uint32_t CHASGN; /**< Channel Assignment */ - __IO uint32_t CHIS; /**< Channel Interrupt Status */ - __I uint32_t _RESERVED2[2]; /**< Reserved */ - __IO uint32_t CHMAP[4]; /**< Channel Map Select 0, 1, 2 and 3 */ -} UDMA_TypeDef; - -// USB - -/** - * @brief Watchdog Timer - */ -typedef struct -{ - __IO uint32_t LOAD; /**< Load */ - __I uint32_t VALUE; /**< Value */ - __IO uint32_t CTL; /**< Control */ - __O uint32_t ICR; /**< Interrupt Clear */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __I uint32_t _RESERVED0[256];/**< Reserved */ - __IO uint32_t TEST; /**< Test */ - __I uint32_t _RESERVED1[505];/**< Reserved */ - __IO uint32_t LOCK; /**< Lock */ -} WDT_TypeDef; - -/** - * @} - */ - -/** - * @addtogroup Peripheral_memorymap - * @{ - */ - -#define SYSCTL_BASE 0x400FE000 -#define HIB_BASE 0x400FC000 -#define FLASH_BASE 0x400FD000 -#define EEPROM_BASE 0x400AF000 -#define UDMA_BASE 0x400FF000 -#define GPIOA_APB_BASE 0x40004000 -#define GPIOA_AHB_BASE 0x40058000 -#define GPIOB_APB_BASE 0x40005000 -#define GPIOB_AHB_BASE 0x40059000 -#define GPIOC_APB_BASE 0x40006000 -#define GPIOC_AHB_BASE 0x4005A000 -#define GPIOD_APB_BASE 0x40007000 -#define GPIOD_AHB_BASE 0x4005B000 -#define GPIOE_APB_BASE 0x40024000 -#define GPIOE_AHB_BASE 0x4005C000 -#define GPIOF_APB_BASE 0x40025000 -#define GPIOF_AHB_BASE 0x4005D000 -#define GPIOG_APB_BASE 0x40026000 -#define GPIOG_AHB_BASE 0x4005E000 -#define GPIOH_APB_BASE 0x40027000 -#define GPIOH_AHB_BASE 0x4005F000 -#define GPIOJ_APB_BASE 0x4003D000 -#define GPIOJ_AHB_BASE 0x40060000 -#define GPIOK_AHB_BASE 0x40061000 -#define GPIOL_AHB_BASE 0x40062000 -#define GPIOM_AHB_BASE 0x40063000 -#define GPION_AHB_BASE 0x40064000 -#define GPIOP_AHB_BASE 0x40065000 -#define GPIOQ_AHB_BASE 0x40066000 -#define GPT0_BASE 0x40030000 -#define GPT1_BASE 0x40031000 -#define GPT2_BASE 0x40032000 -#define GPT3_BASE 0x40033000 -#define GPT4_BASE 0x40034000 -#define GPT5_BASE 0x40035000 -#define WGPT0_BASE 0x40036000 -#define WGPT1_BASE 0x40037000 -#define WGPT2_BASE 0x4004C000 -#define WGPT3_BASE 0x4004D000 -#define WGPT4_BASE 0x4004E000 -#define WGPT5_BASE 0x4004F000 -#define WDT0_BASE 0x40000000 -#define WDT1_BASE 0x40001000 -#define ADC0_BASE 0x40038000 -#define ADC1_BASE 0x40039000 -#define UART0_BASE 0x4000C000 -#define UART1_BASE 0x4000D000 -#define UART2_BASE 0x4000E000 -#define UART3_BASE 0x4000F000 -#define UART4_BASE 0x40010000 -#define UART5_BASE 0x40011000 -#define UART6_BASE 0x40012000 -#define UART7_BASE 0x40013000 -#define SSI0_BASE 0x40008000 -#define SSI1_BASE 0x40009000 -#define SSI2_BASE 0x4000A000 -#define SSI3_BASE 0x4000B000 -#define I2C0_BASE 0x40020000 -#define I2C1_BASE 0x40021000 -#define I2C2_BASE 0x40022000 -#define I2C3_BASE 0x40023000 -#define I2C4_BASE 0x40023000 -#define I2C5_BASE 0x40023000 -#define CAN0_BASE 0x40040000 -#define CAN1_BASE 0x40041000 -// usb -#define ACMP_BASE 0x4003C000 -#define PWM0_BASE 0x40028000 -#define PWM1_BASE 0x40029000 -#define QEI0_BASE 0x4002C000 -#define QEI1_BASE 0x4002D000 - -/** - * @} - */ - -/** - * @addtogroup Peripheral_declaration - * @{ - */ - -#define SYSCTL ((SYSCTL_TypeDef *) SYSCTL_BASE) -#define HIB ((HIB_TypeDef *) HIB_BASE) -#define FLASH ((FLASH_TypeDef *) FLASH_BASE) -#define EEPROM ((EEPROM_TypeDef *) EEPROM_BASE) -#define UDMA ((UDMA_TypeDef *) UDMA_BASE) -#define GPIOA_APB ((GPIO_TypeDef *) GPIOA_APB_BASE) -#define GPIOA_AHB ((GPIO_TypeDef *) GPIOA_AHB_BASE) -#define GPIOB_APB ((GPIO_TypeDef *) GPIOB_APB_BASE) -#define GPIOB_AHB ((GPIO_TypeDef *) GPIOB_AHB_BASE) -#define GPIOC_APB ((GPIO_TypeDef *) GPIOC_APB_BASE) -#define GPIOC_AHB ((GPIO_TypeDef *) GPIOC_AHB_BASE) -#define GPIOD_APB ((GPIO_TypeDef *) GPIOD_APB_BASE) -#define GPIOD_AHB ((GPIO_TypeDef *) GPIOD_AHB_BASE) -#define GPIOE_APB ((GPIO_TypeDef *) GPIOE_APB_BASE) -#define GPIOE_AHB ((GPIO_TypeDef *) GPIOE_AHB_BASE) -#define GPIOF_APB ((GPIO_TypeDef *) GPIOF_APB_BASE) -#define GPIOF_AHB ((GPIO_TypeDef *) GPIOF_AHB_BASE) -#define GPIOG_APB ((GPIO_TypeDef *) GPIOG_APB_BASE) -#define GPIOG_AHB ((GPIO_TypeDef *) GPIOG_AHB_BASE) -#define GPIOH_APB ((GPIO_TypeDef *) GPIOH_APB_BASE) -#define GPIOH_AHB ((GPIO_TypeDef *) GPIOH_AHB_BASE) -#define GPIOJ_APB ((GPIO_TypeDef *) GPIOJ_APB_BASE) -#define GPIOJ_AHB ((GPIO_TypeDef *) GPIOJ_AHB_BASE) -#define GPIOK_AHB ((GPIO_TypeDef *) GPIOK_AHB_BASE) -#define GPIOL_AHB ((GPIO_TypeDef *) GPIOL_AHB_BASE) -#define GPIOM_AHB ((GPIO_TypeDef *) GPIOM_AHB_BASE) -#define GPION_AHB ((GPIO_TypeDef *) GPION_AHB_BASE) -#define GPIOP_AHB ((GPIO_TypeDef *) GPIOP_AHB_BASE) -#define GPIOQ_AHB ((GPIO_TypeDef *) GPIOQ_AHB_BASE) -#define GPT0 ((GPT_TypeDef *) GPT0_BASE) -#define GPT1 ((GPT_TypeDef *) GPT1_BASE) -#define GPT2 ((GPT_TypeDef *) GPT2_BASE) -#define GPT3 ((GPT_TypeDef *) GPT3_BASE) -#define GPT4 ((GPT_TypeDef *) GPT4_BASE) -#define GPT5 ((GPT_TypeDef *) GPT5_BASE) -#define WGPT0 ((GPT_TypeDef *) WGPT0_BASE) -#define WGPT1 ((GPT_TypeDef *) WGPT1_BASE) -#define WGPT2 ((GPT_TypeDef *) WGPT2_BASE) -#define WGPT3 ((GPT_TypeDef *) WGPT3_BASE) -#define WGPT4 ((GPT_TypeDef *) WGPT4_BASE) -#define WGPT5 ((GPT_TypeDef *) WGPT5_BASE) -#define WDT0 ((WDT_TypeDef *) WDT0_BASE) -#define WDT1 ((WDT_TypeDef *) WDT1_BASE) -#define ADC0 ((ADC_TypeDef*) ADC0_BASE) -#define ADC1 ((ADC_TypeDef*) ADC1_BASE) -#define UART0 ((UART_TypeDef *) UART0_BASE) -#define UART1 ((UART_TypeDef *) UART1_BASE) -#define UART2 ((UART_TypeDef *) UART2_BASE) -#define UART3 ((UART_TypeDef *) UART3_BASE) -#define UART4 ((UART_TypeDef *) UART4_BASE) -#define UART5 ((UART_TypeDef *) UART5_BASE) -#define UART6 ((UART_TypeDef *) UART6_BASE) -#define UART7 ((UART_TypeDef *) UART7_BASE) -#define SSI0 ((SSI_TypeDef *) SSI0_BASE) -#define SSI1 ((SSI_TypeDef *) SSI1_BASE) -#define SSI2 ((SSI_TypeDef *) SSI2_BASE) -#define SSI3 ((SSI_TypeDef *) SSI3_BASE) -#define I2C0 ((I2C_TypeDef *) I2C0_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#define I2C3 ((I2C_TypeDef *) I2C3_BASE) -#define I2C4 ((I2C_TypeDef *) I2C4_BASE) -#define I2C5 ((I2C_TypeDef *) I2C5_BASE) -#define CAN0 ((CAN_TypeDef *) CAN0_BASE) -#define CAN1 ((CAN_TypeDef *) CAN1_BASE) -// usb -#define ACMP ((ACMP_TypeDef *) ACMP_BASE) -#define PWM0 ((PWM_TypeDef *) PWM0_BASE) -#define PWM1 ((PWM_TypeDef *) PWM1_BASE) -#define QEI0 ((QEI_TypeDef *) QEI0_BASE) -#define QEI1 ((QEI_TypeDef *) QEI1_BASE) - -/** - * @} - */ - -#endif /* __TM4C123x_H */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/os/hal/ports/TIVA/TM4C129x/hal_lld.c b/os/hal/ports/TIVA/TM4C129x/hal_lld.c index 60d6763..7af3cc4 100644 --- a/os/hal/ports/TIVA/TM4C129x/hal_lld.c +++ b/os/hal/ports/TIVA/TM4C129x/hal_lld.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -76,8 +76,8 @@ void tiva_clock_init(void) /* * 2. Power up the MOSC by clearing the NOXTAL bit in the MOSCCTL register. */ - moscctl = SYSCTL->MOSCCTL; - moscctl &= ~MOSCCTL_NOXTAL; + moscctl = HWREG(SYSCTL_MOSCCTL); + moscctl &= ~SYSCTL_MOSCCTL_NOXTAL; /* * 3. If single-ended MOSC mode is required, the MOSC is ready to use. If crystal mode is required, @@ -85,18 +85,18 @@ void tiva_clock_init(void) * (RIS), indicating MOSC crystal mode is ready. */ #if TIVA_MOSC_SINGLE_ENDED - SYSCTL->MOSCCTL = moscctl; + HWREG(SYSCTL_MOSCCTL) = moscctl; #else - moscctl &= ~MOSCCTL_PWRDN; - SYSCTL->MOSCCTL = moscctl; + moscctl &= ~SYSCTL_MOSCCTL_PWRDN; + HWREG(SYSCTL_MOSCCTL) = moscctl; - while (!(SYSCTL->RIS & SYSCTL_RIS_MOSCPUPRIS)); + while (!(HWREG(SYSCTL_RIS) & SYSCTL_RIS_MOSCPUPRIS)); #endif /* * 4. Set the OSCSRC field to 0x3 in the RSCLKCFG register at offset 0x0B0. */ - rsclkcfg = SYSCTL->RSCLKCFG; + rsclkcfg = HWREG(SYSCTL_RSCLKCFG); rsclkcfg |= TIVA_RSCLKCFG_OSCSRC; @@ -109,44 +109,42 @@ void tiva_clock_init(void) * 6. Write the PLLFREQ0 and PLLFREQ1 registers with the values of Q, N, MINT, and MFRAC to * the configure the desired VCO frequency setting. */ - SYSCTL->PLLFREQ1 = (0x04 << 0); // 5 - 1 - SYSCTL->PLLFREQ0 = (0x60 << 0) | PLLFREQ0_PLLPWR; + HWREG(SYSCTL_PLLFREQ1) = (0x04 << 0); // 5 - 1 + HWREG(SYSCTL_PLLFREQ0) = (0x60 << 0) | SYSCTL_PLLFREQ0_PLLPWR; /* * 7. Write the MEMTIM0 register to correspond to the new system clock setting. */ - SYSCTL->MEMTIM0 = (MEMTIM0_FBCHT_3_5 | MEMTIM0_FWS_5 | MEMTIM0_EBCHT_3_5 | MEMTIM0_EWS_5 | MEMTIM0_MB1); + HWREG(SYSCTL_MEMTIM0) = (SYSCTL_MEMTIM0_FBCHT_3_5 | (5 << SYSCTL_MEMTIM0_FWS_S) | SYSCTL_MEMTIM0_EBCHT_3_5 | (5 << SYSCTL_MEMTIM0_EWS_S) | SYSCTL_MEMTIM0_MB1); /* * Wait for the PLLSTAT register to indicate the PLL has reached lock at the new operating point * (or that a timeout period has passed and lock has failed, in which case an error condition exists * and this sequence is abandoned and error processing is initiated). */ - while (!SYSCTL->PLLSTAT & PLLSTAT_LOCK); + while (!HWREG(SYSCTL_PLLSTAT) & SYSCTL_PLLSTAT_LOCK); /* * 9. Write the RSCLKCFG register's PSYSDIV value, set the USEPLL bit to enabled, and MEMTIMU * bit. */ - rsclkcfg = SYSCTL->RSCLKCFG; + rsclkcfg = HWREG(SYSCTL_RSCLKCFG); - rsclkcfg |= (RSCLKCFG_USEPLL | (0x03 << 0) | (0x03 << 20) | (0x03 << 24)); + rsclkcfg |= (SYSCTL_RSCLKCFG_USEPLL | (0x03 << 0) | (0x03 << 20) | (0x03 << 24)); //rsclkcfg |= ((0x03 << 0) | (1 << 28) | (0x03 << 20)); - rsclkcfg |= RSCLKCFG_MEMTIMU; + rsclkcfg |= SYSCTL_RSCLKCFG_MEMTIMU; // set new configuration - SYSCTL->RSCLKCFG = rsclkcfg; + HWREG(SYSCTL_RSCLKCFG) = rsclkcfg; #if HAL_USE_PWM #if TIVA_PWM_USE_PWM0 - PWM0->CC = TIVA_PWM_FIELDS; + HWREG(PWM0_CC) = TIVA_PWM_FIELDS; #endif #endif } -/** - * @} - */ +/** @} */ diff --git a/os/hal/ports/TIVA/TM4C129x/hal_lld.h b/os/hal/ports/TIVA/TM4C129x/hal_lld.h index e5c667d..1080fae 100644 --- a/os/hal/ports/TIVA/TM4C129x/hal_lld.h +++ b/os/hal/ports/TIVA/TM4C129x/hal_lld.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -38,170 +38,8 @@ * @name Platform identification * @{ */ - #define PLATFORM_NAME "Tiva C Series TM4C129x" - -/** - * @} - */ - -/** - * @name RIS register bits definitions - * @{ - */ - -#define SYSCTL_RIS_PLLLRIS (1 << 6) -#define SYSCTL_RIS_MOSCPUPRIS (1 << 8) - -/** - * @} - */ - -/** - * @name MOSCCTL register bits definitions - * @{ - */ - -#define MOSCCTL_CVAL (1 << 0) -#define MOSCCTL_MOSCIM (1 << 1) -#define MOSCCTL_NOXTAL (1 << 2) -#define MOSCCTL_PWRDN (1 << 3) -#define MOSCCTL_OSCRNG (1 << 4) - -/** - * @} - */ - -/** - * @name RSCLKCFG register bits definitions - * @{ - */ - -#define RSCLKCFG_PSYSDIV_bm (0xfffff << 0) -#define RSCLKCFG_OSYSDIV_bm (0xfffff << 10 - -#define RSCLKCFG_OSCSRC_bm (0xff << 20) -#define RSCLKCFG_OSCSRC_PIOSC (0 << 20) -#define RSCLKCFG_OSCSRC_LFIOSC (0x02 << 20) -#define RSCLKCFG_OSCSRC_MOSC (0x03 << 20) -#define RSCLKCFG_OSCSRC_RTCOSC (0x04 << 20) - -#define RSCLKCFG_PLLSRC_bm (0xff << 24) -#define RSCLKCFG_PLLSRC_PIOSC (0 << 24) -#define RSCLKCFG_PLLSRC_MOSC (0x03 << 24) - -#define RSCLKCFG_USEPLL (1 << 28) - -#define RSCLKCFG_ACG (1 << 29) - -#define RSCLKCFG_NEWFREQ (1 << 30) - -#define RSCLKCFG_MEMTIMU (1 << 31) - -/** - * @} - */ - -/** - * @name PLLFREQ0 register bits definitions - * The PLL frequency can be calculated using the following equation: - * fVCO = (fIN * MDIV) - * where - * fIN = fXTAL/(Q+1)(N+1) or fPIOSC/(Q+1)(N+1) - * MDIV = MINT + (MFRAC / 1024) - * The Q and N values are programmed in the PLLFREQ1 register. Note that to reduce jitter, MFRAC - * should be programmed to 0x0. - * @{ - */ - -#define PLLFREQ0_MINT_bm (0xfffff << 0) -#define PLLFREQ0_MFRAC_bm (0xfffff << 10) -#define PLLFREQ0_PLLPWR (1 << 23) - -/** - * @} - */ - -/** - * @name PLLFREQ1 register bits definitions - * @{ - */ - -#define PLLFREQ1_N_bm (0x7ff << 0) -#define PLLFREQ1_Q_bm (0x7ff << 8) - -/** - * @} - */ - -/** - * @name MEMTIM0 register bits definitions - * @{ - */ - -#define MEMTIM0_FWS_bm (0xff << 0) -#define MEMTIM0_FWS_0 (0x00 << 0) -#define MEMTIM0_FWS_1 (0x01 << 0) -#define MEMTIM0_FWS_2 (0x02 << 0) -#define MEMTIM0_FWS_3 (0x03 << 0) -#define MEMTIM0_FWS_4 (0x04 << 0) -#define MEMTIM0_FWS_5 (0x05 << 0) -#define MEMTIM0_FWS_6 (0x06 << 0) -#define MEMTIM0_FWS_7 (0x07 << 0) - -#define MEMTIM0_FBCE (1 << 5) - -#define MEMTIM0_FBCHT_bm (0xff << 6) -#define MEMTIM0_FBCHT_0_5 (0x00 << 6) -#define MEMTIM0_FBCHT_1 (0x01 << 6) -#define MEMTIM0_FBCHT_1_5 (0x02 << 6) -#define MEMTIM0_FBCHT_2 (0x03 << 6) -#define MEMTIM0_FBCHT_2_5 (0x04 << 6) -#define MEMTIM0_FBCHT_3 (0x05 << 6) -#define MEMTIM0_FBCHT_3_5 (0x06 << 6) -#define MEMTIM0_FBCHT_4 (0x07 << 6) -#define MEMTIM0_FBCHT_4_5 (0x08 << 6) - -#define MEMTIM0_EWS_bm (0xff << 16) -#define MEMTIM0_EWS_0 (0x00 << 16) -#define MEMTIM0_EWS_1 (0x01 << 16) -#define MEMTIM0_EWS_2 (0x02 << 16) -#define MEMTIM0_EWS_3 (0x03 << 16) -#define MEMTIM0_EWS_4 (0x04 << 16) -#define MEMTIM0_EWS_5 (0x05 << 16) -#define MEMTIM0_EWS_6 (0x06 << 16) -#define MEMTIM0_EWS_7 (0x07 << 16) - -#define MEMTIM0_EBCE (1 << 21) - -#define MEMTIM0_EBCHT_bm (0xff << 22) -#define MEMTIM0_EBCHT_0_5 (0x00 << 22) -#define MEMTIM0_EBCHT_1 (0x01 << 22) -#define MEMTIM0_EBCHT_1_5 (0x02 << 22) -#define MEMTIM0_EBCHT_2 (0x03 << 22) -#define MEMTIM0_EBCHT_2_5 (0x04 << 22) -#define MEMTIM0_EBCHT_3 (0x05 << 22) -#define MEMTIM0_EBCHT_3_5 (0x06 << 22) -#define MEMTIM0_EBCHT_4 (0x07 << 22) -#define MEMTIM0_EBCHT_4_5 (0x08 << 22) - -// XXX: what is this? -#define MEMTIM0_MB1 0x00100010 // MB1 = Must be one - -/** - * @} - */ - -/** - * @name PLLSTAT register bits definitions - * @{ - */ - -#define PLLSTAT_LOCK (1 << 0) - -/** - * @} - */ +/** @} */ /*===========================================================================*/ /* Driver pre-compile time settings. */ @@ -212,7 +50,7 @@ #endif #if !defined(TIVA_RSCLKCFG_OSCSRC) -#define TIVA_RSCLKCFG_OSCSRC RSCLKCFG_OSCSRC_MOSC +#define TIVA_RSCLKCFG_OSCSRC SYSCTL_RSCLKCFG_OSCSRC_MOSC #endif /*===========================================================================*/ @@ -229,55 +67,55 @@ /* * Oscillator-related checks. */ -#if !(TIVA_RSCLKCFG_OSCSRC == RSCLKCFG_OSCSRC_PIOSC) && \ - !(TIVA_RSCLKCFG_OSCSRC == RSCLKCFG_OSCSRC_LFIOSC) && \ - !(TIVA_RSCLKCFG_OSCSRC == RSCLKCFG_OSCSRC_MOSC) && \ - !(TIVA_RSCLKCFG_OSCSRC == RSCLKCFG_OSCSRC_RTCOSC) +#if !(TIVA_RSCLKCFG_OSCSRC == SYSCTL_RSCLKCFG_OSCSRC_PIOSC) && \ + !(TIVA_RSCLKCFG_OSCSRC == SYSCTL_RSCLKCFG_OSCSRC_LFIOSC) && \ + !(TIVA_RSCLKCFG_OSCSRC == SYSCTL_RSCLKCFG_OSCSRC_MOSC) && \ + !(TIVA_RSCLKCFG_OSCSRC == SYSCTL_RSCLKCFG_OSCSRC_RTC) #error "Invalid value for TIVA_RSCLKCFG_OSCSRC defined" #endif #if TIVA_XTAL_VALUE == 4000000 -#define TIVA_XTAL_ (0x06 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_4MHZ #elif TIVA_XTAL_VALUE == 4096000 -#define TIVA_XTAL_ (0x07 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_4_09MHZ #elif TIVA_XTAL_VALUE == 4915200 -#define TIVA_XTAL_ (0x08 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_4_91MHZ #elif TIVA_XTAL_VALUE == 5000000 -#define TIVA_XTAL_ (0x09 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_5MHZ #elif TIVA_XTAL_VALUE == 5120000 -#define TIVA_XTAL_ (0x0a << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_5_12MHZ #elif TIVA_XTAL_VALUE == 6000000 -#define TIVA_XTAL_ (0x0b << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_6MHZ #elif TIVA_XTAL_VALUE == 6144000 -#define TIVA_XTAL_ (0x0c << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_6_14MHZ #elif TIVA_XTAL_VALUE == 7372800 -#define TIVA_XTAL_ (0x0d << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_7_37MHZ #elif TIVA_XTAL_VALUE == 8000000 -#define TIVA_XTAL_ (0x0e << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_8MHZ #elif TIVA_XTAL_VALUE == 8192000 -#define TIVA_XTAL_ (0x0f << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_8_19MHZ #elif TIVA_XTAL_VALUE == 10000000 -#define TIVA_XTAL_ (0x10 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_10MHZ #elif TIVA_XTAL_VALUE == 12000000 -#define TIVA_XTAL_ (0x11 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_12MHZ #elif TIVA_XTAL_VALUE == 12288000 -#define TIVA_XTAL_ (0x12 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_12_2MHZ #elif TIVA_XTAL_VALUE == 13560000 -#define TIVA_XTAL_ (0x13 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_13_5MHZ #elif TIVA_XTAL_VALUE == 14318180 -#define TIVA_XTAL_ (0x14 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_14_3MHZ #elif TIVA_XTAL_VALUE == 16000000 -#define TIVA_XTAL_ (0x15 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_16MHZ #elif TIVA_XTAL_VALUE == 16384000 -#define TIVA_XTAL_ (0x16 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_16_3MHZ #elif TIVA_XTAL_VALUE == 18000000 -#define TIVA_XTAL_ (0x17 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_18MHZ #elif TIVA_XTAL_VALUE == 20000000 -#define TIVA_XTAL_ (0x18 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_20MHZ #elif TIVA_XTAL_VALUE == 24000000 -#define TIVA_XTAL_ (0x19 << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_24MHZ #elif TIVA_XTAL_VALUE == 25000000 -#define TIVA_XTAL_ (0x1a << 6) +#define TIVA_XTAL_ SYSCTL_RCC_XTAL_25MHZ #else #error "Invalid value for TIVA_XTAL_VALUE defined" #endif diff --git a/os/hal/ports/TIVA/TM4C129x/platform.mk b/os/hal/ports/TIVA/TM4C129x/platform.mk index b8363f3..9702796 100644 --- a/os/hal/ports/TIVA/TM4C129x/platform.mk +++ b/os/hal/ports/TIVA/TM4C129x/platform.mk @@ -1,14 +1,34 @@ -# List of all the TM4C129x platform files. -PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/TM4C129x/hal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_st_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_pal_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_serial_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_mac_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_ext_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD/hal_wdg_lld.c - -# Required include directories -PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/TM4C129x \ - ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/LLD +# Required platform files. +PLATFORMSRC := $(CHIBIOS)/os/hal/ports/common/ARMCMx/nvic.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/TM4C129x/hal_lld.c + +# Required include directories. +PLATFORMINC := $(CHIBIOS)/os/hal/ports/common/ARMCMx \ + ${CHIBIOS_CONTRIB}/os/hal/ports/TIVA/TM4C129x + +ifeq ($(USE_SMART_BUILD),yes) + +# Configuration files directory +ifeq ($(CONFDIR),) + CONFDIR = . +endif + +HALCONF := $(strip $(shell cat $(CONFDIR)/halconf.h | egrep -e "\#define")) +else +endif + +# Drivers compatible with the platform. +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/ADC/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPIO/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/GPTM/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/I2C/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/MAC/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/PWM/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/SSI/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/UART/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/uDMA/driver.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/LLD/WDT/driver.mk + +# Shared variables +ALLCSRC += $(PLATFORMSRC) +ALLINC += $(PLATFORMINC) diff --git a/os/hal/ports/TIVA/TM4C129x/tiva_isr.h b/os/hal/ports/TIVA/TM4C129x/tiva_isr.h index 255bfd6..3db9ba3 100644 --- a/os/hal/ports/TIVA/TM4C129x/tiva_isr.h +++ b/os/hal/ports/TIVA/TM4C129x/tiva_isr.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -35,9 +35,9 @@ */ /* GPIO units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1292NCPDT) || defined(TM4C1294KCPDT)\ - || defined(TM4C1294NCPDT) || defined(TM4C129CNCPDT) || defined(TM4C129DNCPDT)\ - || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1292NCPDT) || defined(PART_TM4C1294KCPDT)\ + || defined(PART_TM4C1294NCPDT) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129DNCPDT)\ + || defined(PART_TM4C129EKCPDT) || defined(PART_TM4C129ENCPDT) #define TIVA_GPIOA_HANDLER Vector40 #define TIVA_GPIOB_HANDLER Vector44 #define TIVA_GPIOC_HANDLER Vector48 @@ -98,10 +98,10 @@ #define TIVA_GPIOQ6_NUMBER 90 #define TIVA_GPIOQ7_NUMBER 91 #endif -#if defined(TM4C1290NCZAD) || defined(TM4C1292NCZAD) || defined(TM4C1294NCZAD)\ - || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD) || defined(TM4C1299NCZAD)\ - || defined(TM4C129CNCZAD) || defined(TM4C129DNCZAD) || defined(TM4C129ENCZAD)\ - || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294NCZAD)\ + || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD) || defined(PART_TM4C1299NCZAD)\ + || defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129ENCZAD)\ + || defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_GPIOA_HANDLER Vector40 #define TIVA_GPIOB_HANDLER Vector44 #define TIVA_GPIOC_HANDLER Vector48 @@ -170,85 +170,85 @@ #endif /* EPI units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_EPI0_HANDLER Vector108 #define TIVA_EPI0_NUMBER 50 #endif /* CRC units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) /* CRC has no interrupts.*/ #endif /* AES Accelerator units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) /* no interrupts.*/ #endif -#if defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT) \ - || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT)\ - || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD)\ - || defined(TM4C129XNCZAD) +#if defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCPDT) \ + || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT) || defined(PART_TM4C129ENCPDT)\ + || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD)\ + || defined(PART_TM4C129XNCZAD) #define TIVA_AES_HANDLER Vector1BC #define TIVA_AES_NUMBER 95 #endif /* DES Accelerator units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) /* no interrupts.*/ #endif -#if defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT)\ - || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT)\ - || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD)\ - || defined(TM4C129XNCZAD) +#if defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCPDT)\ + || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT) || defined(PART_TM4C129ENCPDT)\ + || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD)\ + || defined(PART_TM4C129XNCZAD) #define TIVA_DES_HANDLER Vector1C0 #define TIVA_DES_NUMBER 51 #endif /* SHA/MD5 Accelerator units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) /* no interrupts.*/ #endif -#if defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT)\ - || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT)\ - || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD)\ - || defined(TM4C129XNCZAD) +#if defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCPDT)\ + || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT) || defined(PART_TM4C129ENCPDT)\ + || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD)\ + || defined(PART_TM4C129XNCZAD) #define TIVA_SHA_MD5_HANDLER Vector1B8 #define TIVA_SHA_MD5_NUMBER 94 #endif /* GPT units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_GPT0A_HANDLER Vector8C #define TIVA_GPT0B_HANDLER Vector90 #define TIVA_GPT1A_HANDLER Vector94 @@ -285,26 +285,26 @@ #endif /* WDT units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_WDT_HANDLER Vector88 #define TIVA_WDT_NUMBER 18 #endif /* ADC units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_ADC0_SEQ0_HANDLER Vector78 #define TIVA_ADC0_SEQ1_HANDLER Vector7C #define TIVA_ADC0_SEQ2_HANDLER Vector80 @@ -325,13 +325,13 @@ #endif /* UART units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_UART0_HANDLER Vector54 #define TIVA_UART1_HANDLER Vector58 #define TIVA_UART2_HANDLER VectorC4 @@ -352,13 +352,13 @@ #endif /* QSSI units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_QSSI0_HANDLER Vector5C #define TIVA_QSSI1_HANDLER VectorC8 #define TIVA_QSSI2_HANDLER Vector118 @@ -371,13 +371,13 @@ #endif /* I2C units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_I2C0_HANDLER Vector60 #define TIVA_I2C1_HANDLER VectorD4 #define TIVA_I2C2_HANDLER Vector134 @@ -402,28 +402,28 @@ #endif /* 1-Wire Master units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD) #define TIVA_HAS_1WIRE FALSE #endif -#if defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_1WIRE_HANDLER Vector1E4 #define TIVA_1WIRE_NUMBER 105 #endif /* CAN units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_CAN0_HANDLER VectorD8 #define TIVA_CAN1_HANDLER VectorDC @@ -432,69 +432,69 @@ #endif /* Ethernet MAC units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1297NCZAD)\ - || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1297NCZAD)\ + || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD) /* no interrupts.*/ #endif -#if defined(TM4C1292NCPDT) || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT)\ - || defined(TM4C1294NCPDT) || defined(TM4C1294NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD)\ - || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD)\ - || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1292NCPDT) || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT)\ + || defined(PART_TM4C1294NCPDT) || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD)\ + || defined(PART_TM4C129EKCPDT) || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD)\ + || defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_MAC_HANDLER VectorE0 #define TIVA_MAC_NUMBER 40 #endif /* Ethernet PHY units.*/ -#if defined(TM4C1290NCPDT)|| defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT) \ - || defined(TM4C1292NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C129CNCPDT)\ - || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) +#if defined(PART_TM4C1290NCPDT)|| defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT) \ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C129CNCPDT)\ + || defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) /* no interrupts.*/ #endif -#if defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT) || defined(TM4C1294NCZAD)\ - || defined(TM4C1299KCZAD) || defined(TM4C1299NCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT) || defined(PART_TM4C1294NCZAD)\ + || defined(PART_TM4C1299KCZAD) || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) /* no interrupts.*/ #endif /* USB units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_USB0_HANDLER VectorE8 #define TIVA_USB0_NUMBER 42 #endif /* LCD units.*/ -#if defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD) || defined(TM4C129DNCZAD)\ - || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD) || defined(PART_TM4C129DNCZAD)\ + || defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_LCD_HANDLER Vector1C4 #define TIVA_LCD_NUMBER 97 #endif -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT)\ - || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT)\ + || defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) /* no interrupts.*/ #endif /* AC units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_AC0_HANDLER VectorA4 #define TIVA_AC1_HANDLER VectorA8 #define TIVA_AC2_HANDLER VectorAC @@ -505,13 +505,13 @@ #endif /* PWM units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_PWM0FAULT_HANDLER Vector64 #define TIVA_PWM0GEN0_HANDLER Vector68 #define TIVA_PWM0GEN1_HANDLER Vector6C @@ -526,13 +526,13 @@ #endif /* QEI units.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_QEI0_HANLDER Vector74 #define TIVA_QEI0_NUMBER 13 diff --git a/os/hal/ports/TIVA/TM4C129x/tiva_registry.h b/os/hal/ports/TIVA/TM4C129x/tiva_registry.h index 5815351..cd8344d 100644 --- a/os/hal/ports/TIVA/TM4C129x/tiva_registry.h +++ b/os/hal/ports/TIVA/TM4C129x/tiva_registry.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2014..2016 Marco Veeneman + Copyright (C) 2014..2017 Marco Veeneman Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,6 +25,27 @@ #ifndef _TIVA_REGISTRY_H_ #define _TIVA_REGISTRY_H_ +#if !defined(PART_TM4C1290NCPDT) && !defined(PART_TM4C1290NCZAD) && !defined(PART_TM4C1292NCPDT)\ + && !defined(PART_TM4C1292NCZAD) && !defined(PART_TM4C1294KCPDT) && !defined(PART_TM4C1294NCPDT)\ + && !defined(PART_TM4C1294NCZAD) && !defined(PART_TM4C1297NCZAD) && !defined(PART_TM4C1299KCZAD)\ + && !defined(PART_TM4C1299NCZAD) && !defined(PART_TM4C129CNCPDT) && !defined(PART_TM4C129CNCZAD)\ + && !defined(PART_TM4C129DNCPDT) && !defined(PART_TM4C129DNCZAD) && !defined(PART_TM4C129EKCPDT)\ + && !defined(PART_TM4C129ENCPDT) && !defined(PART_TM4C129ENCZAD) && !defined(PART_TM4C129LNCZAD)\ + && !defined(PART_TM4C129XKCZAD) && !defined(PART_TM4C129XNCZAD) +#error "No valid device defined." +#endif + +#if !defined(TARGET_IS_TM4C129_RA0) +#error "No valid device revision defined." +#endif + +/** + * @brief Sub-family identifier. + */ +#if !defined(TM4C129x) || defined(__DOXYGEN__) +#define TM4C129x +#endif + /*===========================================================================*/ /* Platform capabilities. */ /*===========================================================================*/ @@ -35,9 +56,9 @@ */ /* GPIO attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1292NCPDT) || defined(TM4C1294KCPDT)\ - || defined(TM4C1294NCPDT) || defined(TM4C129CNCPDT) || defined(TM4C129DNCPDT)\ - || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1292NCPDT) || defined(PART_TM4C1294KCPDT)\ + || defined(PART_TM4C1294NCPDT) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129DNCPDT)\ + || defined(PART_TM4C129EKCPDT) || defined(PART_TM4C129ENCPDT) #define TIVA_HAS_GPIOA TRUE #define TIVA_HAS_GPIOB TRUE #define TIVA_HAS_GPIOC TRUE @@ -56,11 +77,12 @@ #define TIVA_HAS_GPIOR FALSE #define TIVA_HAS_GPIOS FALSE #define TIVA_HAS_GPIOT FALSE +#define TIVA_GPIO_PINS 120 #endif -#if defined(TM4C1290NCZAD) || defined(TM4C1292NCZAD) || defined(TM4C1294NCZAD)\ - || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD) || defined(TM4C1299NCZAD)\ - || defined(TM4C129CNCZAD) || defined(TM4C129DNCZAD) || defined(TM4C129ENCZAD)\ - || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294NCZAD)\ + || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD) || defined(PART_TM4C1299NCZAD)\ + || defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129ENCZAD)\ + || defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_GPIOA TRUE #define TIVA_HAS_GPIOB TRUE #define TIVA_HAS_GPIOC TRUE @@ -79,80 +101,81 @@ #define TIVA_HAS_GPIOR TRUE #define TIVA_HAS_GPIOS TRUE #define TIVA_HAS_GPIOT TRUE +#define TIVA_GPIO_PINS 144 #endif /* EPI attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_EPI0 TRUE #endif /* CRC attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_CRC0 TRUE #endif /* AES Accelerator attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) #define TIVA_HAS_AES FALSE #endif -#if defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT) \ - || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT)\ - || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD)\ - || defined(TM4C129XNCZAD) +#if defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCPDT) \ + || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT) || defined(PART_TM4C129ENCPDT)\ + || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD)\ + || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_AES TRUE #endif /* DES Accelerator attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) #define TIVA_HAS_DES FALSE #endif -#if defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT)\ - || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT)\ - || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD)\ - || defined(TM4C129XNCZAD) +#if defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCPDT)\ + || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT) || defined(PART_TM4C129ENCPDT)\ + || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD)\ + || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_DES TRUE #endif /* SHA/MD5 Accelerator attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) #define TIVA_HAS_SHA_MD5 FALSE #endif -#if defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT)\ - || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT)\ - || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD)\ - || defined(TM4C129XNCZAD) +#if defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCPDT)\ + || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT) || defined(PART_TM4C129ENCPDT)\ + || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD)\ + || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_SHA_MD5 TRUE #endif /* GPT attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_GPT0 TRUE #define TIVA_HAS_GPT1 TRUE #define TIVA_HAS_GPT2 TRUE @@ -170,37 +193,37 @@ #endif /* WDT attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_WDT0 TRUE #define TIVA_HAS_WDT1 TRUE #endif /* ADC attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_ADC0 TRUE #define TIVA_HAS_ADC1 TRUE #endif /* UART attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_UART0 TRUE #define TIVA_HAS_UART1 TRUE #define TIVA_HAS_UART2 TRUE @@ -212,13 +235,13 @@ #endif /* QSSI attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_QSSI0 TRUE #define TIVA_HAS_QSSI1 TRUE #define TIVA_HAS_QSSI2 TRUE @@ -226,13 +249,13 @@ #endif /* I2C attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_I2C0 TRUE #define TIVA_HAS_I2C1 TRUE #define TIVA_HAS_I2C2 TRUE @@ -246,113 +269,113 @@ #endif /* 1-Wire Master attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD) #define TIVA_HAS_1WIRE FALSE #endif -#if defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_1WIRE TRUE #endif /* CAN attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_CAN0 TRUE #define TIVA_HAS_CAN1 TRUE #endif /* Ethernet MAC attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1297NCZAD)\ - || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1297NCZAD)\ + || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD) #define TIVA_HAS_ETHERNET_MAC FALSE #endif -#if defined(TM4C1292NCPDT) || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT)\ - || defined(TM4C1294NCPDT) || defined(TM4C1294NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD)\ - || defined(TM4C129EKCPDT) || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD)\ - || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1292NCPDT) || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT)\ + || defined(PART_TM4C1294NCPDT) || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD)\ + || defined(PART_TM4C129EKCPDT) || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD)\ + || defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_ETHERNET_MAC TRUE #endif /* Ethernet PHY attributes.*/ -#if defined(TM4C1290NCPDT)|| defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT) \ - || defined(TM4C1292NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C129CNCPDT)\ - || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) +#if defined(PART_TM4C1290NCPDT)|| defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT) \ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C129CNCPDT)\ + || defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) #define TIVA_HAS_ETHERNET_PHY FALSE #endif -#if defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT) || defined(TM4C1294NCZAD)\ - || defined(TM4C1299KCZAD) || defined(TM4C1299NCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT) || defined(PART_TM4C1294NCZAD)\ + || defined(PART_TM4C1299KCZAD) || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_ETHERNET_PHY TRUE #endif /* USB attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_USB0 TRUE #endif /* LCD attributes.*/ -#if defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD) || defined(TM4C129DNCZAD)\ - || defined(TM4C129LNCZAD) || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD) || defined(PART_TM4C129DNCZAD)\ + || defined(PART_TM4C129LNCZAD) || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_LCD TRUE #endif -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT)\ - || defined(TM4C129CNCZAD) || defined(TM4C129DNCPDT) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT)\ + || defined(PART_TM4C129CNCZAD) || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) #define TIVA_HAS_LCD FALSE #endif /* AC attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_AC0 TRUE #define TIVA_HAS_AC1 TRUE #define TIVA_HAS_AC2 TRUE #endif /* PWM attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_PWM0 TRUE #define TIVA_HAS_PWM1 FALSE #endif /* QEI attributes.*/ -#if defined(TM4C1290NCPDT) || defined(TM4C1290NCZAD) || defined(TM4C1292NCPDT)\ - || defined(TM4C1292NCZAD) || defined(TM4C1294KCPDT) || defined(TM4C1294NCPDT)\ - || defined(TM4C1294NCZAD) || defined(TM4C1297NCZAD) || defined(TM4C1299KCZAD)\ - || defined(TM4C1299NCZAD) || defined(TM4C129CNCPDT) || defined(TM4C129CNCZAD)\ - || defined(TM4C129DNCPDT) || defined(TM4C129DNCZAD) || defined(TM4C129EKCPDT)\ - || defined(TM4C129ENCPDT) || defined(TM4C129ENCZAD) || defined(TM4C129LNCZAD)\ - || defined(TM4C129XKCZAD) || defined(TM4C129XNCZAD) +#if defined(PART_TM4C1290NCPDT) || defined(PART_TM4C1290NCZAD) || defined(PART_TM4C1292NCPDT)\ + || defined(PART_TM4C1292NCZAD) || defined(PART_TM4C1294KCPDT) || defined(PART_TM4C1294NCPDT)\ + || defined(PART_TM4C1294NCZAD) || defined(PART_TM4C1297NCZAD) || defined(PART_TM4C1299KCZAD)\ + || defined(PART_TM4C1299NCZAD) || defined(PART_TM4C129CNCPDT) || defined(PART_TM4C129CNCZAD)\ + || defined(PART_TM4C129DNCPDT) || defined(PART_TM4C129DNCZAD) || defined(PART_TM4C129EKCPDT)\ + || defined(PART_TM4C129ENCPDT) || defined(PART_TM4C129ENCZAD) || defined(PART_TM4C129LNCZAD)\ + || defined(PART_TM4C129XKCZAD) || defined(PART_TM4C129XNCZAD) #define TIVA_HAS_QEI0 TRUE #define TIVA_HAS_QEI1 FALSE #endif diff --git a/os/hal/ports/TIVA/TM4C129x/tm4c129x.h b/os/hal/ports/TIVA/TM4C129x/tm4c129x.h deleted file mode 100644 index 5a5f4f2..0000000 --- a/os/hal/ports/TIVA/TM4C129x/tm4c129x.h +++ /dev/null @@ -1,1131 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @addtogroup CMSIS - * @{ - */ - -/** - * @addtogroup TM4C129x - * @{ - */ - -#ifndef __TM4C129x_H -#define __TM4C129x_H - -/** - * @addtogroup Configuration_section_for_CMSIS - * @{ - */ - -/** - * @brief Configuration of the Cortex-M4 Processor and Core Peripherals - */ -#define __CM4_REV 0x0001 /**< Cortex-M4 Core Revision */ -#define __MPU_PRESENT 1 /**< MPU present */ -#define __NVIC_PRIO_BITS 3 /**< Bits used for Priority Levels */ -#define __Vendor_SysTickConfig 0 /**< Use different SysTick Config */ -#define __FPU_PRESENT 1 /**< FPU present */ - -/** - * @brief TM4C129x Interrupt Number Definitions - */ -typedef enum IRQn -{ - /* TODO: check interrupt numbers with tm4c129 device */ - /***** Cortex-M4 Processor Exceptions Numbers ******************************/ - NonMaskableInt_IRQn = -14, /**< Cortex-M4 Non-Maskable Interrupt */ - HardFault_IRQn = -13, /**< Cortex-M4 Hard Fault Interrupt */ - MemoryManagement_IRQn = -12, /**< Cortex-M4 Memory Management Interrupt */ - BusFault_IRQn = -11, /**< Cortex-M4 Bus Fault Interrupt */ - UsageFault_IRQn = -10, /**< Cortex-M4 Usage Fault Interrupt */ - SVCall_IRQn = -5, /**< Cortex-M4 SV Call Interrupt */ - DebugMonitor_IRQn = -4, /**< Cortex-M4 Debug Monitor Interrupt */ - PendSV_IRQn = -3, /**< Cortex-M4 Pend SV Interrupt */ - SysTick_IRQn = -1, /**< Cortex-M4 System Tick Interrupt */ - /***** TM4C129x Specific Interrupt Numbers *********************************/ - GPIOA_IRQn = 0, /**< GPIO Port A */ - GPIOB_IRQn = 1, /**< GPIO Port B */ - GPIOC_IRQn = 2, /**< GPIO Port C */ - GPIOD_IRQn = 3, /**< GPIO Port D */ - GPIOE_IRQn = 4, /**< GPIO Port E */ - UART0_IRQn = 5, /**< UART0 */ - UART1_IRQn = 6, /**< UART1 */ - SSI0_IRQn = 7, /**< SSI0 */ - I2C0_IRQn = 8, /**< I2C0 */ - PWM0FAULT_IRQn = 9, /**< PWM0 Fault */ - PWM0GEN0_IRQn = 10, /**< PWM0 Generator 0 */ - PWM0GEN1_IRQn = 11, /**< PWM0 Generator 1 */ - PWM0GEN2_IRQn = 12, /**< PWM0 Generator 2 */ - QEI0_IRQn = 13, /**< QEI0 */ - ADC0SEQ0_IRQn = 14, /**< ADC0 Sequence 0 */ - ADC0SEQ1_IRQn = 15, /**< ADC0 Sequence 1 */ - ADC0SEQ2_IRQn = 16, /**< ADC0 Sequence 2 */ - ADC0SEQ3_IRQn = 17, /**< ADC0 Sequence 3 */ - WATCHDOG_IRQn = 18, /**< Watchdog Timers 0 and 1 */ - TIMER0A_IRQn = 19, /**< 16/32-Bit Timer 0A */ - TIMER0B_IRQn = 20, /**< 16/32-Bit Timer 0B */ - TIMER1A_IRQn = 21, /**< 16/32-Bit Timer 1A */ - TIMER1B_IRQn = 22, /**< 16/32-Bit Timer 1B */ - TIMER2A_IRQn = 23, /**< 16/32-Bit Timer 2A */ - TIMER2B_IRQn = 24, /**< 16/32-Bit Timer 2B */ - ACOMP0_IRQn = 25, /**< Analog Comparator 0 */ - ACOMP1_IRQn = 26, /**< Analog Comparator 1 */ - SYSCON_IRQn = 28, /**< System Control */ - FMCEECON_IRQn = 29, /**< Flash Memory Control and EEPROM Control */ - GPIOF_IRQn = 30, /**< GPIO Port F */ - UART2_IRQn = 33, /**< UART2 */ - SSI1_IRQn = 34, /**< SSI1 */ - TIMER3A_IRQn = 35, /**< 16/32-Bit Timer 3A */ - TIMER3B_IRQn = 36, /**< 16/32-Bit Timer 3B */ - I2C1_IRQn = 37, /**< I2C1 */ - QEI1_IRQn = 38, /**< QEI1 */ - CAN0_IRQn = 39, /**< CAN0 */ - CAN1_IRQn = 40, /**< CAN1 */ - HIBMODULE_IRQn = 43, /**< Hibernation Module */ - USB_IRQn = 44, /**< USB */ - PWM0GEN3_IRQn = 45, /**< PWM0 Generator 3 */ - UDMASFW_IRQn = 46, /**< UDMA Software */ - UDMAERR_IRQn = 47, /**< UDMA Error */ - ADC1SEQ0_IRQn = 48, /**< ADC1 Sequence 0 */ - ADC1SEQ1_IRQn = 49, /**< ADC1 Sequence 1 */ - ADC1SEQ2_IRQn = 50, /**< ADC1 Sequence 2 */ - ADC1SEQ3_IRQn = 51, /**< ADC1 Sequence 3 */ - SSI2_IRQn = 57, /**< SSI2 */ - SSI3_IRQn = 58, /**< SSI3 */ - UART3_IRQn = 59, /**< UART3 */ - UART4_IRQn = 60, /**< UART4 */ - UART5_IRQn = 61, /**< UART5 */ - UART6_IRQn = 62, /**< UART6 */ - UART7_IRQn = 63, /**< UART7 */ - I2C2_IRQn = 68, /**< I2C2 */ - I2C3_IRQn = 69, /**< I2C3 */ - TIMER4A_IRQn = 70, /**< 16/32-Bit Timer 4A */ - TIMER4B_IRQn = 71, /**< 16/32-Bit Timer 4B */ - TIMER5A_IRQn = 92, /**< 16/32-Bit Timer 5A */ - TIMER5B_IRQn = 93, /**< 16/32-Bit Timer 5B */ - WTIMER0A_IRQn = 94, /**< 32/64-Bit Timer 0A */ - WTIMER0B_IRQn = 95, /**< 32/64-Bit Timer 0B */ - WTIMER1A_IRQn = 96, /**< 32/64-Bit Timer 1A */ - WTIMER1B_IRQn = 97, /**< 32/64-Bit Timer 1B */ - WTIMER2A_IRQn = 98, /**< 32/64-Bit Timer 2A */ - WTIMER2B_IRQn = 99, /**< 32/64-Bit Timer 2B */ - WTIMER3A_IRQn = 100, /**< 32/64-Bit Timer 3A */ - WTIMER3B_IRQn = 101, /**< 32/64-Bit Timer 3B */ - WTIMER4A_IRQn = 102, /**< 32/64-Bit Timer 4A */ - WTIMER4B_IRQn = 103, /**< 32/64-Bit Timer 4B */ - WTIMER5A_IRQn = 104, /**< 32/64-Bit Timer 5A */ - WTIMER5B_IRQn = 105, /**< 32/64-Bit Timer 5B */ - SYSEXCEPT_IRQn = 106, /**< System Exception (imprecise) */ - PWM1GEN0_IRQn = 134, /**< PWM1 Generator 0 */ - PWM1GEN1_IRQn = 135, /**< PWM1 Generator 1 */ - PWM1GEN2_IRQn = 136, /**< PWM1 Generator 2 */ - PWM1GEN3_IRQn = 137, /**< PWM1 Generator 3 */ - PWM1FAULT_IRQn = 138 /**< PWM1 Fault */ -} IRQn_Type; - -/** - * @} - */ - -#include "core_cm4.h" /* Cortex-M4 processor and core peripherals.*/ -#include <stdint.h> - -/** - * @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog Comparator - */ -typedef struct -{ - __IO uint32_t MIS; /**< Masked Interrupt Status */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t INTEN; /**< Interrupt Enable */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t REFCTL; /**< Reference Voltage Control */ - __I uint32_t _RESERVED1[3]; /**< Reserved */ - __I uint32_t STAT0; /**< Status 0 */ - __IO uint32_t CTL0; /**< Control 0 */ - __I uint32_t _RESERVED2[6]; /**< Reserved */ - __I uint32_t STAT1; /**< Status 1 */ - __IO uint32_t CTL1; /**< Control 1 */ - __I uint32_t _RESERVED3[990];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ -} ACMP_TypeDef; - -/** - * @brief Analog-to-Digital Converter - */ -typedef struct -{ - __IO uint32_t MUX; /**< Sample Sequence Input Multiplexer - Select */ - __IO uint32_t CTL; /**< Sample Sequence Control */ - __I uint32_t FIFO; /**< Sample Sequence Result FIFO */ - __I uint32_t FSTAT; /**< Sample Sequence FIFO Status */ - __IO uint32_t OP; /**< Sample Sequence Operation */ - __IO uint32_t DC; /**< Sample Sequence Digital Comparator - Select */ - __I uint32_t _RESERVED0[2]; /**< Reserved */ -} ADC_SS_t; - -typedef struct -{ - __IO uint32_t ACTSS; /**< Active Sample Sequencer */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t IM; /**< Interrupt Mask */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ - __IO uint32_t OSTAT; /**< Overflow Status */ - __IO uint32_t EMUX; /**< Event Multiplexer Select */ - __IO uint32_t USTAT; /**< Underflow Status */ - __IO uint32_t TSSEL; /**< Trigger Source Select */ - __IO uint32_t SSPRI; /**< Sample Sequencer Priority */ - __IO uint32_t SPC; /**< Sample Phase Control */ - __IO uint32_t PSSI; /**< Processor Sample Sequence Initiate */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t SAC; /**< Sample Averaging Control */ - __IO uint32_t DCISC; /**< Digital Comparator Interrupt Status and - Clear */ - __IO uint32_t CTL; /**< Control */ - __I uint32_t _RESERVED1[1]; /**< Reserved */ - ADC_SS_t SS[4]; /**< Sample Sequence 0, 1, 2 and 3 */ - __I uint32_t _RESERVED2[784];/**< Reserved */ - __O uint32_t DCRIC; /**< Digital Comparator Reset Initial - Conditions */ - __I uint32_t _RESERVED3[63]; /**< Reserved */ - __IO uint32_t DCCTL[8]; /**< Digital Comparator Control 0 - 7 */ - __I uint32_t _RESERVED4[8]; /**< Reserved */ - __IO uint32_t DCCMP[8]; /**< Digital Comparator Range 0 - 7 */ - __I uint32_t _RESERVED5[88]; /**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ - __IO uint32_t PC; /**< Peripheral Configuration */ - __IO uint32_t CC; /**< Clock Configuration */ -} ADC_TypeDef; - -/** - * @brief Controller Area Network - */ -typedef struct -{ - __IO uint32_t CRQ; /**< Command Request */ - __IO uint32_t CMSK; /**< Command Mask */ - __IO uint32_t MSK[2]; /**< Mask 1 and 2 */ - __IO uint32_t ARB[2]; /**< Arbitration 1 and 2 */ - __IO uint32_t MCTL; /**< Message Control */ - __IO uint32_t DA[2]; /**< Data A1 and A2 */ - __IO uint32_t DB[2]; /**< Data B1 and B2 */ - __I uint32_t _RESERVED0[13]; /**< Reserved */ -} CAN_INTERFACE_t; - -typedef struct -{ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t STS; /**< Status */ - __I uint32_t ERR; /**< Error Counter */ - __IO uint32_t BIT; /**< Bit Timing */ - __I uint32_t INT; /**< Interrupt */ - __IO uint32_t TST; /**< Test */ - __IO uint32_t BRPE; /**< Baud Rate Prescaler Extension */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - CAN_INTERFACE_t IF[2]; /**< IF1 and IF2 */ - __I uint32_t _RESERVED1[8]; /**< Reserved */ - __I uint32_t TXRQ[2]; /**< Transmission Request 1 and 2 */ - __I uint32_t _RESERVED2[6]; /**< Reserved */ - __I uint32_t NWDA[2]; /**< New Data 1 and 2 */ - __I uint32_t _RESERVED3[6]; /**< Reserved */ - __I uint32_t MSGINT[2]; /**< Message 1 and 2 Interrupt Pending */ - __I uint32_t _RESERVED4[6]; /**< Reserved */ - __I uint32_t MSGVAL[2]; /**< Message 1 and 2 Valid */ -} CAN_TypeDef; - -/** - * @brief EEPROM Memory - */ -typedef struct -{ - __IO uint32_t EESIZE; /**< Size Information */ - __IO uint32_t EEBLOCK; /**< Current Block */ - __IO uint32_t EEOFFSET; /**< Current Offset */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t EERDWR; /**< Read-Write */ - __IO uint32_t EERDWRINC; /**< Read-Write with Increment */ - __IO uint32_t EEDONE; /**< Done Status */ - __IO uint32_t EESUPP; /**< Support Control and Status */ - __IO uint32_t EEUNLOCK; /**< Unlock */ - __I uint32_t _RESERVED1[3]; /**< Reserved */ - __IO uint32_t EEPROT; /**< Protection */ - __IO uint32_t EEPASS[3]; /**< Password */ - __IO uint32_t EEINT; /**< Interrupt */ - __I uint32_t _RESERVED2[3]; /**< Reserved */ - __IO uint32_t EEHIDE; /**< Block Hide */ - __I uint32_t _RESERVED3[11]; /**< Reserved */ - __IO uint32_t EEDBGME; /**< Debug Mass Erase */ - __I uint32_t _RESERVED4[975];/**< Reserved */ - __IO uint32_t EEPROMPP; /**< Peripheral Properties */ -} EEPROM_TypeDef; - -/** - * @brief Flash Memory - */ -typedef struct -{ - __IO uint32_t FMA; /**< Flash Memory Address */ - __IO uint32_t FMD; /**< Flash Memory Data */ - __IO uint32_t FMC; /**< Flash Memory Control */ - __I uint32_t FCRIS; /**< Flash Controller Raw Interrupt Status */ - __IO uint32_t FCIM; /**< Flash Controller Interrupt Mask */ - __IO uint32_t FCMISC; /**< Masked Interrupt Status and Clear */ - __I uint32_t _RESERVED0[2]; /**< Reserved */ - __IO uint32_t FMC2; /**< Flash Memory Control 2 */ - __I uint32_t _RESERVED1[3]; /**< Reserved */ - __IO uint32_t FWBVAL; /**< Flash Write Buffer Valid */ - __I uint32_t _RESERVED2[51]; /**< Reserved */ - __IO uint32_t FWBN; /**< Flash Write Buffer n */ - __I uint32_t _RESERVED3[943];/**< Reserved */ - __I uint32_t FSIZE; /**< Flash Size */ - __I uint32_t SSIZE; /**< SRAM Size */ - __I uint32_t _RESERVED4[1]; /**< Reserved */ - __IO uint32_t ROMSWMAP; /**< ROM Software Map */ -} FLASH_TypeDef; - - - -/** - * @brief General Purpose Input/Outputs - */ -typedef struct -{ - union { - __IO uint32_t MASKED_ACCESS[256]; /**< Masked access of Data Register */ - struct { - __I uint32_t _RESERVED0[255]; /**< Reserved */ - __IO uint32_t DATA; /**< Data */ - }; - }; - __IO uint32_t DIR; /**< Direction */ - __IO uint32_t IS; /**< Interrupt Sense */ - __IO uint32_t IBE; /**< Interrupt Both Edges */ - __IO uint32_t IEV; /**< Interrupt Event */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t AFSEL; /**< Alternate Function Select */ - __I uint32_t _RESERVED1[55]; /**< Reserved */ - __IO uint32_t DR2R; /**< 2-mA Drive Select */ - __IO uint32_t DR4R; /**< 4-mA Drive Select */ - __IO uint32_t DR8R; /**< 8-mA Drive Select */ - __IO uint32_t ODR; /**< Open Drain Select */ - __IO uint32_t PUR; /**< Pull-Up Select */ - __IO uint32_t PDR; /**< Pull-Down Select */ - __IO uint32_t SLR; /**< Slew Rate Control Select */ - __IO uint32_t DEN; /**< Digital Enable */ - __IO uint32_t LOCK; /**< Lock */ - __IO uint32_t CR; /**< Commit */ - __IO uint32_t AMSEL; /**< Analog Mode Select */ - __IO uint32_t PCTL; /**< Port Control */ - __IO uint32_t ADCCTL; /**< ADC Control */ - __IO uint32_t DMACTL; /**< DMA Control */ - __IO uint32_t SI; /**< */ - __IO uint32_t DR12R; /**< */ - __IO uint32_t WAKEPEN; /**< */ - __IO uint32_t WAKELVL; /**< */ - __IO uint32_t WAKESTAT; /**< */ - __I uint32_t _RESERVED2[669];/**< */ - __I uint32_t PP; /**< */ - __IO uint32_t PC; /**< */ -} GPIO_TypeDef; - -/** - * @brief General Purpose Timer - */ -typedef struct -{ - __IO uint32_t CFG; /**< Configuration */ - __IO uint32_t TAMR; /**< Timer A Mode */ - __IO uint32_t TBMR; /**< Timer B Mode */ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t SYNC; /**< Synchronize */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t IMR; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t TAILR; /**< Timer A Interval Load */ - __IO uint32_t TBILR; /**< Timer B Interval Load */ - __IO uint32_t TAMATCHR; /**< Timer A Match */ - __IO uint32_t TBMATCHR; /**< Timer B Match */ - __IO uint32_t TAPR; /**< Timer A Prescale */ - __IO uint32_t TBPR; /**< Timer B Prescale */ - __IO uint32_t TAPMR; /**< Timer A Prescale Match */ - __IO uint32_t TBPMR; /**< Timer B Prescale Match */ - __I uint32_t TAR; /**< Timer A */ - __I uint32_t TBR; /**< Timer B */ - __IO uint32_t TAV; /**< Timer A Value */ - __IO uint32_t TBV; /**< Timer B Value */ - __I uint32_t RTCPD; /**< RTC Predivide */ - __I uint32_t TAPS; /**< Timer A Prescale Snapshot */ - __I uint32_t TBPS; /**< Timer B Prescale Snapshot */ - __I uint32_t TAPV; /**< Timer A Prescale Value */ - __I uint32_t TBPV; /**< Timer B Prescale Value */ - __I uint32_t _RESERVED1[981];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ -} GPT_TypeDef; - -/** - * @brief Hibernation Module - */ -typedef struct -{ - __I uint32_t RTCC; /**< RTC Counter */ - __IO uint32_t RTCM0; /**< RTC Match 0 */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __IO uint32_t RTCLD; /**< RTC Load */ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __IO uint32_t IC; /**< Interrupt Clear */ - __IO uint32_t RTCT; /**< RTC Trim */ - __IO uint32_t RTCSS; /**< RTC Sub Seconds */ - __I uint32_t _RESERVED1[1]; /**< Reserved */ - __IO uint32_t DATA; /**< Data */ -} HIB_TypeDef; - -/** - * @brief Inter-Integrated Circuit - */ -typedef struct -{ - __IO uint32_t MSA; /**< Master Slave Address */ - __IO uint32_t MCS; /**< Master Control/Status */ - __IO uint32_t MDR; /**< Master Data */ - __IO uint32_t MTPR; /**< Master Timer Period */ - __IO uint32_t MIMR; /**< Master Interrupt Mask */ - __I uint32_t MRIS; /**< Master Raw Interrupt Status */ - __IO uint32_t MMIS; /**< Master Masked Interrupt Status */ - __O uint32_t MICR; /**< Master Interrupt Clear */ - __IO uint32_t MCR; /**< Master Configuration */ - __IO uint32_t MCLKOCNT; /**< Master Clock Low Timeout Count */ - __I uint32_t _RESERVED0[1]; /**< Reserved */ - __I uint32_t MBMON; /**< Master Bus Monitor */ - __IO uint32_t MCR2; /**< Master Configuration 2 */ - __I uint32_t _RESERVED1[497];/**< Reserved */ - __IO uint32_t SOAR; /**< Slave Own Address */ - __IO uint32_t SCSR; /**< Slave Control/Status */ - __IO uint32_t SDR; /**< Slave Data */ - __IO uint32_t SIMR; /**< Slave Interrupt Mask */ - __I uint32_t SRIS; /**< Slave Raw Interrupt Status */ - __I uint32_t SMIS; /**< Slave Masked Interrupt Status */ - __O uint32_t SICR; /**< Slave Interrupt Clear */ - __IO uint32_t SOAR2; /**< Slave Own Address 2 */ - __IO uint32_t SACKCTL; /**< Slave ACK Control */ - __I uint32_t _RESERVED2[487];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ - __I uint32_t PC; /**< Peripheral Configuration */ -} I2C_TypeDef; - -/* - * @brief Pulse Width Modulator - */ -typedef struct -{ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t INTEN; /**< Interrupt and Trigger Enable */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ - __IO uint32_t LOAD; /**< Load */ - __I uint32_t COUNT; /**< Counter */ - __IO uint32_t CMP[2]; /**< Compare A, B */ - __IO uint32_t GEN[2]; /**< Generator A, B Control */ - __IO uint32_t DBCTL; /**< Dead-Band Control */ - __IO uint32_t DBRISE; /**< Dead-Band Rising-Edge Delay */ - __IO uint32_t DBFALL; /**< Dead-Band Falling-Edge Delay */ - __IO uint32_t FLTSRC[2]; /**< Fault Source 0, 1 */ - __IO uint32_t MINFLTPER; /**< Minimum Fault Period */ -} PWM_GENERATOR_T; - -typedef struct -{ - union { - __IO uint32_t SEN; /**< Fault Pin Logic Sense, for GEN 0 and 1 */ - __I uint32_t _RESERVED0[1];/**< Reserved, for GEN 2 and 3 */ - }; - __IO uint32_t STAT[2]; /**< Fault Status */ - __I uint32_t _RESERVED1[29]; /**< Reserved */ -} PWM_FLT_t; - -typedef struct -{ - __IO uint32_t CTL; /**< Master Control */ - __IO uint32_t SYNC; /**< Time Base Sync */ - __IO uint32_t ENABLE; /**< Output Enable */ - __IO uint32_t INVERT; /**< Output Inversion */ - __IO uint32_t FAULT; /**< Output Fault */ - __IO uint32_t INTEN; /**< Interrupt Enable */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ - __I uint32_t STATUS; /**< Status */ - __IO uint32_t FAULTVAL; /**< Fault Condition Value */ - __IO uint32_t ENUPD; /**< Enable Update */ - __I uint32_t _RESERVED0[5]; /**< Reserved */ - __IO PWM_GENERATOR_T PWM[4]; /**< PWM Generator 0, 1, 2 and 3 */ - __I uint32_t _RESERVED1[432];/**< Reserved */ - PWM_FLT_t FLT[4]; /**< Fault registers 0, 1, 2 and 3 */ - __I uint32_t _RESERVED2[368];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ -} PWM_TypeDef; - -/** - * @brief Quadrature Encoder Interface - */ -typedef struct -{ - __IO uint32_t CTL; /**< Control */ - __I uint32_t STAT; /**< Status */ - __IO uint32_t POS; /**< Position */ - __IO uint32_t MAXPOS; /**< Maximum Position */ - __IO uint32_t LOAD; /**< Timer Load */ - __I uint32_t TIME; /**< Timer */ - __I uint32_t COUNT; /**< Velocity Counter */ - __I uint32_t SPEED; /**< Velocity */ - __IO uint32_t INTEN; /**< Interrupt Enable */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t ISC; /**< Interrupt Status and Clear */ -} QEI_TypeDef; - -/** - * @brief Synchronous Serial Interface - */ -typedef struct -{ - __IO uint32_t CR[2]; /**< Control 0, 1 */ - __IO uint32_t DR; /**< Data */ - __I uint32_t SR; /**< Status */ - __IO uint32_t CPSR; /**< Clock Prescale */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t DMACTL; /**< DMA Control */ - __I uint32_t _RESERVED0[1000];/**< Reserved */ - __IO uint32_t CC; /**< Clock Configuration */ -} SSI_TypeDef; - -/** - * @brief System Control - */ -typedef struct -{ - __I uint32_t DID0; /**< Device Identification 0 */ - __I uint32_t DID1; /**< Device Identification 1 */ - __I uint32_t RESERVED0[12]; /**< Reserved */ - __IO uint32_t PBORCTL; /**< Power-Temp Brown Out Control */ - __I uint32_t RESERVED1[5]; /**< Reserved */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t IMC; /**< Interrupt Mask Control */ - __IO uint32_t MISC; /**< Interrupt Status and Clear */ - __IO uint32_t RESC; /**< Reset Cause */ - __IO uint32_t PWRTC; /**< Power-Temperature Cause */ - __IO uint32_t NMIC; /**< NMI Cause Register */ - __I uint32_t RESERVED2[5]; /**< Reserved */ - __IO uint32_t MOSCCTL; /**< Main Oscillator Control */ - __I uint32_t RESERVED3[12]; /**< Reserved */ - __IO uint32_t RSCLKCFG; /**< Run and Sleep Mode Configuration Register */ - __I uint32_t RESERVEDx[3]; - __IO uint32_t MEMTIM0; /**< Memory Timing Parameter Register 0 for Main Flash and EEPROM */ - __I uint32_t RESERVED4[29]; /**< Reserved */ - __IO uint32_t ALTCLKCFG; /**< Alternate Clock Configuration */ - __I uint32_t RESERVED5[2]; /**< Reserved */ - __IO uint32_t DSLPCLKCFG; /**< Deep Sleep Clock Configuration */ - __IO uint32_t DIVSCLK; /**< Divisor and Source Clock Configuration */ - __I uint32_t SYSPROP; /**< System Properties */ - __IO uint32_t PIOSCCAL; /**< PIOSC Calibration */ - __I uint32_t PIOSCSTAT; /**< PIOSC Statistics */ - __I uint32_t RESERVED6[2]; /**< Reserved */ - __IO uint32_t PLLFREQ0; /**< PLL Frequency 0 */ - __IO uint32_t PLLFREQ1; /**< PLL Frequency 1 */ - __I uint32_t PLLSTAT; /**< PLL Frequency Status */ - __I uint32_t RESERVED7[7]; /**< Reserved */ - __IO uint32_t SLPPWRCFG; /**< Sleep Power Configuration */ - __IO uint32_t DSLPPWRCFG; /**< Deep-Sleep Power Configuration */ - __I uint32_t RESERVED8[4]; /**< Reserved */ - __I uint32_t NVMSTAT; /**< Non-Volatile Memory Information */ - __I uint32_t RESERVED9[4]; /**< Reserved */ - __IO uint32_t LDOSPCTL; /**< LDO Sleep Power Control */ - __I uint32_t LDOSPCAL; /**< LDO Sleep Power Calibration */ - __IO uint32_t LDODPCTL; /**< LDO Deep-Sleep Power Control */ - __I uint32_t LDODPCAL; /**< LDO Deep-Sleep Power Calibration */ - __I uint32_t RESERVED10[2]; /**< Reserved */ - __I uint32_t SDPMST; /**< Sleep/Deep-Sleep Power Mode Status */ - __I uint32_t RESERVED11[2]; /**< Reserved */ - __IO uint32_t RESBEHAVCTL; /**< Reset Behavior Control Register */ - __I uint32_t RESERVED12[6]; /**< Reserved */ - __IO uint32_t HSSR; /**< Hardware System Service Request */ - __I uint32_t RESERVED[34]; /**< Reserved */ - __I uint32_t USBPDS; /**< USB Power Domain Status */ - __IO uint32_t USBMPC; /**< USB Memory Power Control */ - __I uint32_t EMACPDS; /**< Ethernet MAC Power Domain Status */ - __IO uint32_t EMACMPC; /**< Ethernet MAC Memory Power Control */ - __I uint32_t RESERVED13[2]; /**< Reserved */ - __I uint32_t CAN0PDS; /**< CAN 0 Power Domain Status */ - __IO uint32_t CAN0MPC; /**< CAN 0 Memory Power Control */ - __I uint32_t CAN1PDS; /**< CAN 1 Power Domain Status */ - __IO uint32_t CAN1MPC; /**< CAN 1 Memory Power Control */ - __I uint32_t RESERVED14[22]; /**< Reserved */ - __I uint32_t PPWD; /**< WDT Peripheral Present */ - __I uint32_t PPTIMER; /**< GPT Peripheral Present */ - __I uint32_t PPGPIO; /**< GPIO Peripheral Present */ - __I uint32_t PPDMA; /**< UDMA Peripheral Present */ - __I uint32_t PPEPI; /**< EPI Peripheral Present */ - __I uint32_t PPHIB; /**< HIB Peripheral Present */ - __I uint32_t PPUART; /**< UART Peripheral Present */ - __I uint32_t PPSSI; /**< SSI Peripheral Present */ - __I uint32_t PPI2C; /**< I2C Peripheral Present */ - __I uint32_t RESERVED15[1]; /**< Reserved */ - __I uint32_t PPUSB; /**< USB Peripheral Present */ - __I uint32_t RESERVED16[1]; /**< Reserved */ - __I uint32_t PPEPHY; /**< Ethernet PHY Peripheral Present */ - __I uint32_t PPCAN; /**< CAN Peripheral Present */ - __I uint32_t PPADC; /**< ADC Peripheral Present */ - __I uint32_t PPACMP; /**< ACMP Peripheral Present */ - __I uint32_t PPPWM; /**< PWM Peripheral Present */ - __I uint32_t PPQEI; /**< QEI Peripheral Present */ - __I uint32_t PPLPC; /**< Low Pin Count Interface Peripheral Present */ - __I uint32_t RESERVED17[1]; /**< Reserved */ - __I uint32_t PPPECI; /**< Platform Environment Control Interface Peripheral Present */ - __I uint32_t PPFAN; /**< Fan Control Peripheral Present */ - __I uint32_t PPEEPROM; /**< EEPROM Peripheral Present */ - __I uint32_t PPWTIMER; /**< Wide GPT Peripheral Present */ - __I uint32_t RESERVED18[4]; /**< Reserved */ - __I uint32_t PPRTS; /**< Remote Temperature Sensor Peripheral Present */ - __I uint32_t PPCCM; /**< CRC Module Peripheral Present */ - __I uint32_t RESERVED19[6]; /**< Reserved */ - __I uint32_t PPLCD; /**< LCD Peripheral Present */ - __I uint32_t RESERVED20[1]; /**< Reserved */ - __I uint32_t PPOWIRE; /**< 1-Wire Peripheral Present */ - __I uint32_t PPEMAC; /**< Ethernet MAC Peripheral Present */ - __I uint32_t PPPRB; /**< Power Regulator Bus Peripheral Present */ - __I uint32_t PPHIM; /**< Human Interface Master Peripheral Present */ - __I uint32_t RESERVED21[86]; /**< Reserved */ - __IO uint32_t SRWD; /**< WDT Software Reset */ - __IO uint32_t SRTIMER; /**< GPT Software Reset */ - __IO uint32_t SRGPIO; /**< GPIO Software Reset */ - __IO uint32_t SRDMA; /**< UDMA Software Reset */ - __IO uint32_t SREPI; /**< EPI Software Reset */ - __IO uint32_t SRHIB; /**< HIB Software Reset */ - __IO uint32_t SRUART; /**< UART Software Reset */ - __IO uint32_t SRSSI; /**< SSI Software Reset */ - __IO uint32_t SRI2C; /**< I2C Software Reset */ - __I uint32_t RESERVED22[1]; /**< Reserved */ - __IO uint32_t SRUSB; /**< USB Software Reset */ - __I uint32_t RESERVED23[1]; /**< Reserved */ - __IO uint32_t SREPHY; /**< Ethernet PHY Software Reset */ - __IO uint32_t SRCAN; /**< CAN Software Reset */ - __IO uint32_t SRADC; /**< ADC Software Reset */ - __IO uint32_t SRACMP; /**< ACMP Software Reset */ - __IO uint32_t SRPWM; /**< PWM Software Reset */ - __IO uint32_t SRQEI; /**< QEI Software Reset */ - __I uint32_t RESERVED24[4]; /**< Reserved */ - __IO uint32_t SREEPROM; /**< EEPROM Software Reset */ - __I uint32_t RESERVED25[6]; /**< Reserved */ - __IO uint32_t SRCCM; /**< CRC Module Software Reset */ - __I uint32_t RESERVED26[9]; /**< Reserved */ - __IO uint32_t SREMAC; /**< Ethernet MAC Software Reset */ - __I uint32_t RESERVED27[24]; /**< Reserved */ - __IO uint32_t RCGCWD; /**< WDT Run Mode Clock Gating Control */ - __IO uint32_t RCGCTIMER; /**< GPT Run Mode Clock Gating Control */ - __IO uint32_t RCGCGPIO; /**< GPIO Run Mode Clock Gating Control */ - __IO uint32_t RCGCDMA; /**< UDMA Run Mode Clock Gating Control */ - __IO uint32_t RCGCEPI; /**< EPI Run Mode Clock Gating Control */ - __IO uint32_t RCGCHIB; /**< HIB Run Mode Clock Gating Control */ - __IO uint32_t RCGCUART; /**< UART Run Mode Control */ - __IO uint32_t RCGCSSI; /**< SSI Run Mode Clock Gating Control */ - __IO uint32_t RCGCI2C; /**< I2C Run Mode Clock Gating Control */ - __I uint32_t RESERVED28[1]; /**< Reserved */ - __IO uint32_t RCGCUSB; /**< USB Run Mode Clock Gating Control */ - __I uint32_t RESERVED29[1]; /**< Reserved */ - __IO uint32_t RCGCEPHY; /**< Ethernet PHY Run Mode Clock Gating Control */ - __IO uint32_t RCGCCAN; /**< CAN Run Mode Clock Gating Control */ - __IO uint32_t RCGCADC; /**< ADC Run Mode Clock Gating Control */ - __IO uint32_t RCGCACMP; /**< ACMP Run Mode Clock Gating Control */ - __IO uint32_t RCGCPWM; /**< PWM Run Mode Clock Gating Control */ - __IO uint32_t RCGCQEI; /**< QEI Run Mode Clock Gating Control */ - __I uint32_t RESERVED30[4]; /**< Reserved */ - __IO uint32_t RCGCEEPROM; /**< EEPROM Run Mode Clock Gating Control */ - __I uint32_t RESERVED31[6]; /**< Reserved */ - __IO uint32_t RCGCCCM; /**< CRC Module Run Mode Clock Gating Control */ - __I uint32_t RESERVED32[9]; /**< Reserved */ - __IO uint32_t RCGCEMAC; /**< Ethernet MAC Run Mode Clock Gating Control */ - __I uint32_t RESERVED33[24]; /**< Reserved */ - __IO uint32_t SCGCWD; /**< WDT Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCTIMER; /**< GPT Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCGPIO; /**< GPIO Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCDMA; /**< UDMA Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCEPI; /**< EPI Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCHIB; /**< HIB Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCUART; /**< UART Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCSSI; /**< SSI Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCI2C; /**< I2C Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED34[1]; /**< Reserved */ - __IO uint32_t SCGCUSB; /**< USB Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED35[1]; /**< Reserved */ - __IO uint32_t SCGCEPHY; /**< Ethernet PHY Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCCAN; /**< CAN Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCADC; /**< ADC Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCACMP; /**< ACMP Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCPWM; /**< PWM Sleep Mode Clock Gating Control */ - __IO uint32_t SCGCQEI; /**< QEI Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED36[4]; /**< Reserved */ - __IO uint32_t SCGCEEPROM; /**< EEPROM Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED37[6]; /**< Reserved */ - __IO uint32_t SCGCCCM; /**< CRC Module Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED38[9]; /**< Reserved */ - __IO uint32_t SCGCEMAC; /**< Ethernet MAC Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED39[24]; /**< Reserved */ - __IO uint32_t DCGCWD; /**< WDT Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCTIMER; /**< GPT Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCGPIO; /**< GPIO Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCDMA; /**< UDMA Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCEPI; /**< EPI Deep-Sleep Mode Clock Gating Control */ - __IO uint32_t DCGCHIB; /**< HIB Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCUART; /**< UART Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCSSI; /**< SSI Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCI2C; /**< I2C Deep-Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED40[1]; /**< Reserved */ - __IO uint32_t DCGCUSB; /**< USB Deep-Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED41[1]; /**< Reserved */ - __IO uint32_t DCGCEPHY; /**< Ethernet PHY Deep-Sleep Mode Clock Gating Control */ - __IO uint32_t DCGCCAN; /**< CAN Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCADC; /**< ADC Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCACMP; /**< ACMP Deep-Sleep Mode Clock Gating - Control */ - __IO uint32_t DCGCPWM; /**< PWM Deep-Sleep Mode Clock Gating Control*/ - __IO uint32_t DCGCQEI; /**< QEI Deep-Sleep Mode Clock Gating Control*/ - __I uint32_t RESERVED42[4]; /**< Reserved */ - __IO uint32_t DCGCEEPROM; /**< EEPROM Deep-Sleep Mode Clock Gating - Control */ - __I uint32_t RESERVED43[6]; /**< Reserved */ - __IO uint32_t DCGCCCM; /**< CRC Module Deep-Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED44[9]; /**< Reserved */ - __IO uint32_t DCGCEMAC; /**< Ethernet MAC Deep-Sleep Mode Clock Gating Control */ - __I uint32_t RESERVED45[24]; /**< Reserved */ - __IO uint32_t PCWD; /**< Watchdog Timer Power Control */ - __IO uint32_t PCTIMER; /**< 16/32-Bit General-Purpose Timer Power Control */ - __IO uint32_t PCGPIO; /**< General-Purpose Input/Output Power Control */ - __IO uint32_t PCDMA; /**< Micro Direct Memory Access Power Control */ - __IO uint32_t PCEPI; /**< External Peripheral Interface Power Control */ - __IO uint32_t PCHIB; /**< Hibernation Power Control */ - __IO uint32_t PCUART; /**< Universal Asynchronous Receiver/Transmitter Power Control */ - __IO uint32_t PCSSI; /**< Synchronous Serial Interface Power Control */ - __IO uint32_t PCI2C; /**< Inter-Integrated Circuit Power Control */ - __I uint32_t RESERVED46[1]; /**< Reserved */ - __IO uint32_t PCUSB; /**< Universal Serial Bus Power Control */ - __I uint32_t RESERVED47[1]; /**< Reserved */ - __IO uint32_t PCEPHY; /**< Ethernet PHY Power Control */ - __IO uint32_t PCCAN; /**< Controller Area Network Power Control */ - __IO uint32_t PCADC; /**< Analog-to-Digital Converter Power Control */ - __IO uint32_t PCACMP; /**< Analog Comparator Power Control */ - __IO uint32_t PCPWM; /**< Pulse Width Modulator Power Control */ - __IO uint32_t PCQEI; /**< Quadrature Encoder Interface Power Control */ - __I uint32_t RESERVED48[4]; /**< Reserved */ - __IO uint32_t PCEEPROM; /**< EEPROM Power Control */ - __I uint32_t RESERVED49[6]; /**< Reserved */ - __IO uint32_t PCCCM; /**< CRC Module Power Control */ - __I uint32_t RESERVED50[9]; /**< Reserved */ - __IO uint32_t PCEMAC; /**< Ethernet MAC Power Control */ - __I uint32_t RESERVED51[24]; /**< Reserved */ - __IO uint32_t PRWD; /**< WDT Peripheral Ready */ - __IO uint32_t PRTIMER; /**< GPT Peripheral Ready */ - __IO uint32_t PRGPIO; /**< GPIO Peripheral Ready */ - __IO uint32_t PRDMA; /**< UDMA Peripheral Ready */ - __IO uint32_t PREPI; /**< EPI Peripheral Ready */ - __IO uint32_t PRHIB; /**< HIB Peripheral Ready */ - __IO uint32_t PRUART; /**< UART Peripheral Ready */ - __IO uint32_t PRSSI; /**< SSI Peripheral Ready */ - __IO uint32_t PRI2C; /**< I2C Peripheral Ready */ - __I uint32_t RESERVED52[1]; /**< Reserved */ - __IO uint32_t PRUSB; /**< USB Peripheral Ready */ - __I uint32_t RESERVED53[1]; /**< Reserved */ - __IO uint32_t PREPHY; /**< Ethernet PHY Peripheral Ready */ - __IO uint32_t PRCAN; /**< CAN Peripheral Ready */ - __IO uint32_t PRADC; /**< ADC Peripheral Ready */ - __IO uint32_t PRACMP; /**< ACMP Peripheral Ready */ - __IO uint32_t PRPWM; /**< PWM Peripheral Ready */ - __IO uint32_t PRQEI; /**< QEI Peripheral Ready */ - __I uint32_t RESERVED54[4]; /**< Reserved */ - __IO uint32_t PREEPROM; /**< EEPROM Peripheral Ready */ - __I uint32_t RESERVED55[6]; /**< Reserved */ - __IO uint32_t PRCCM; /**< CRC Module Peripheral Ready */ - __I uint32_t RESERVED56[9]; /**< Reserved */ - __IO uint32_t PREMAC; /**< Ethernet MAC Peripheral Ready */ -} SYSCTL_TypeDef; - -/** - * @brief Universal Asynchronous Receiver/Transmitter - */ -typedef struct -{ - __IO uint32_t DR; /**< Data */ - union { - __I uint32_t RSR; /**< Receive Status */ - __O uint32_t ECR; /**< Error Clear */ - }; - __I uint32_t _RESERVED0[4]; /**< Reserved */ - __I uint32_t FR; /**< Flag */ - __I uint32_t _RESERVED1[1]; /**< Reserved */ - __IO uint32_t ILPR; /**< IrDA Low-Power Register */ - __IO uint32_t IBRD; /**< Integer Baud-Rate Divisor */ - __IO uint32_t FBRD; /**< Fractional Baud-Rate Divisor */ - __IO uint32_t LCRH; /**< Line Control */ - __IO uint32_t CTL; /**< Control */ - __IO uint32_t IFLS; /**< Interrupt FIFO Level Select */ - __IO uint32_t IM; /**< Interrupt Mask */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __O uint32_t ICR; /**< Interrupt Clear */ - __IO uint32_t DMACTL; /**< DMA Control */ - __I uint32_t _RESERVED2[22]; /**< Reserved */ - __IO uint32_t BIT9ADDR; /**< 9-Bit Self Address */ - __IO uint32_t BIT9AMASK; /**< 9-Bit Self Address Mask */ - __I uint32_t _RESERVED3[965];/**< Reserved */ - __I uint32_t PP; /**< Peripheral Properties */ - __I uint32_t _RESERVED4[1]; /**< Reserved */ - __IO uint32_t CC; /**< Clock Configuration */ -} UART_TypeDef; - -/** - * @brief Micro Direct Memory Access - */ -typedef struct -{ - __IO uint32_t SET; /**< Set */ - __O uint32_t CLR; /**< Clear */ -} UDMA_SC_t; - -typedef struct -{ - __IO uint32_t STAT; /**< Status */ - __O uint32_t CFG; /**< Configuration */ - __IO uint32_t CTLBASE; /**< Channel Control Base Pointer */ - __IO uint32_t ALTBASE; /**< Alternate Channel Control Base Pointer */ - __IO uint32_t WAITSTAT; /**< Channel Wait-on-Request Status */ - __O uint32_t SWREQ; /**< Channel Software Request */ - UDMA_SC_t USEBURST; /**< Channel Useburst registers */ - UDMA_SC_t REQMASK; /**< Channel Request Mask registers */ - UDMA_SC_t ENA; /**< Channel Enable registers */ - UDMA_SC_t ALT; /**< Channel Primary Alternate registers */ - UDMA_SC_t PRIO; /**< Channel Priority registers */ - __I uint32_t _RESERVED0[3]; /**< Reserved */ - __IO uint32_t ERRCLR; /**< Bus Error Clear */ - __I uint32_t _RESERVED1[300];/**< Reserved */ - __IO uint32_t CHASGN; /**< Channel Assignment */ - __IO uint32_t CHIS; /**< Channel Interrupt Status */ - __I uint32_t _RESERVED2[2]; /**< Reserved */ - __IO uint32_t CHMAP[4]; /**< Channel Map Select 0, 1, 2 and 3 */ -} UDMA_TypeDef; - -// USB - -/** - * @brief Watchdog Timer - */ -typedef struct -{ - __IO uint32_t LOAD; /**< Load */ - __I uint32_t VALUE; /**< Value */ - __IO uint32_t CTL; /**< Control */ - __O uint32_t ICR; /**< Interrupt Clear */ - __I uint32_t RIS; /**< Raw Interrupt Status */ - __I uint32_t MIS; /**< Masked Interrupt Status */ - __I uint32_t _RESERVED0[256];/**< Reserved */ - __IO uint32_t TEST; /**< Test */ - __I uint32_t _RESERVED1[505];/**< Reserved */ - __IO uint32_t LOCK; /**< Lock */ -} WDG_TypeDef; - -/** - * @brief Ethernet peripheral - */ -typedef struct { - __IO uint32_t CFG; /**< Configuration */ - __IO uint32_t FRAMEFLTR; /**< Frame Filter */ - __IO uint32_t HASHTBLH; /**< Hash Table High */ - __IO uint32_t HASHTBLL; /**< Hash Table Low */ - __IO uint32_t MIIADDR; /**< MII Address */ - __IO uint32_t MIIDATA; /**< MII Data Register */ - __IO uint32_t FLOWCTL; /**< Flow Control */ - __IO uint32_t VLANTG; /**< VLAN Tag */ - __I uint32_t RESERVED0[1]; /**< Reserved */ - __IO uint32_t STATUS; /**< Status */ - __IO uint32_t RWUFF; /**< Remote Wake-Up Frame Filter */ - __IO uint32_t PMTCTLSTAT; /**< PMT Control and Status Register */ - __I uint32_t RESERVED1[2]; /**< Reserved */ - __IO uint32_t RIS; /**< Raw Interrupt Status */ - __IO uint32_t IM; /**< Interrupt Mask */ - __IO uint32_t ADDR0H; /**< Address 0 High */ - __IO uint32_t ADDR0L; /**< Address 0 Low Register */ - __IO uint32_t ADDR1H; /**< Address 1 High */ - __IO uint32_t ADDR1L; /**< Address 1 Low */ - __IO uint32_t ADDR2H; /**< Address 2 High */ - __IO uint32_t ADDR2L; /**< Address 2 Low */ - __IO uint32_t ADDR3H; /**< Address 3 High */ - __IO uint32_t ADDR3L; /**< Address 3 Low */ - __I uint32_t RESERVED2[31]; /**< Reserved */ - __IO uint32_t WDOGTO; /**< Watchdog Timeout */ - __I uint32_t RESERVED3[8]; /**< Reserved */ - __IO uint32_t MMCCTRL; /**< MMC Control */ - __IO uint32_t MMCRXRIS; /**< MMC Receive Raw Interrupt Status */ - __IO uint32_t MMCTXRIS; /**< MMC Transmit Raw Interrupt Status */ - __IO uint32_t MMCRXIM; /**< MMC Receive Interrupt Mask */ - __IO uint32_t MMCTXIM; /**< MMC Transmit Interrupt Mask */ - __I uint32_t RESERVED4[1]; /**< Reserved */ - __IO uint32_t TXCNTGB; /**< Transmit Frame Count for Good and Bad - Frames */ - __I uint32_t RESERVED5[12]; /**< Reserved */ - __IO uint32_t TXCNTSCOL; /**< Transmit Frame Count for Frames - Transmitted after Single Collision */ - __IO uint32_t TXCNTMCOL; /**< Transmit Frame Count for Frames - Transmitted after Multiple Collisions */ - __I uint32_t RESERVED6[4]; /**< Reserved */ - __IO uint32_t TXOCTCNTG; /**< Transmit Octet Count Good */ - __I uint32_t RESERVED7[6]; /**< Reserved */ - __IO uint32_t RXCNTGB; /**< Receive Frame Count for Good and Bad - Frames */ - __I uint32_t RESERVED8[4]; /**< Reserved */ - __IO uint32_t RXCNTCRCERR; /**< Receive Frame Count for CRC Error Frames*/ - __IO uint32_t RXCNTALGNERR; /**< Receive Frame Count for Alignment Error - Frames */ - __I uint32_t RESERVED9[10]; /**< Reserved */ - __IO uint32_t RXCNTGUNI; /**< Receive Frame Count for Good Unicast - Frames */ - __I uint32_t RESERVED10[239];/**< Reserved */ - __IO uint32_t VLNINCREP; /**< VLAN Tag Inclusion or Replacement */ - __IO uint32_t VLANHASH; /**< VLAN Hash Table */ - __I uint32_t RESERVED11[93]; /**< Reserved */ - __IO uint32_t TIMSTCTRL; /**< Timestamp Control */ - __IO uint32_t SUBSECINC; /**< Sub-Second Increment */ - __IO uint32_t TIMSEC; /**< System Time - Seconds */ - __IO uint32_t TIMNANO; /**< System Time - Nanoseconds */ - __IO uint32_t TIMSECU; /**< System Time - Seconds Update */ - __IO uint32_t TIMNANOU; /**< System Time - Nanoseconds Update */ - __IO uint32_t TIMADD; /**< Timestamp Addend */ - __IO uint32_t TARGSEC; /**< Target Time Seconds */ - __IO uint32_t TARGNANO; /**< Target Time Nanoseconds */ - __IO uint32_t HWORDSEC; /**< System Time-Higher Word Seconds */ - __IO uint32_t TIMSTAT; /**< Timestamp Status */ - __IO uint32_t PPSCTRL; /**< PPS Control */ - __I uint32_t RESERVED12[12]; /**< Reserved */ - __IO uint32_t PPS0INTVL; /**< PPS0 Interval */ - __IO uint32_t PPS0WIDTH; /**< PPS0 Width */ - __I uint32_t RESERVED13[294];/**< Reserved */ - __IO uint32_t DMABUSMOD; /**< DMA Bus Mode */ - __O uint32_t TXPOLLD; /**< Transmit Poll Demand */ - __O uint32_t RXPOLLD; /**< Receive Poll Demand */ - __IO uint32_t RXDLADDR; /**< Receive Descriptor List Address */ - __IO uint32_t TXDLADDR; /**< Transmit Descriptor List Address */ - __IO uint32_t DMARIS; /**< DMA Interrupt Status */ - __IO uint32_t DMAOPMODE; /**< DMA Operation Mode */ - __IO uint32_t DMAIM; /**< DMA Interrupt Mask Register */ - __IO uint32_t MFBOC; /**< Missed Frame and Buffer Overflow Counter*/ - __IO uint32_t RXINTWDT; /**< Receive Interrupt Watchdog Timer */ - __I uint32_t RESERVED14[8]; /**< Reserved */ - __IO uint32_t HOSTXDESC; /**< Current Host Transmit Descriptor */ - __IO uint32_t HOSRXDESC; /**< Current Host Receive Descriptor */ - __IO uint32_t HOSTXBA; /**< Current Host Transmit Buffer Address */ - __IO uint32_t HOSRXBA; /**< Current Host Receive Buffer Address */ - __I uint32_t RESERVED15[218];/**< Reserved */ - __IO uint32_t PP; /**< Peripheral Property Register */ - __IO uint32_t PC; /**< Peripheral Configuration Register */ - __IO uint32_t CC; /**< Clock Configuration Register */ - __I uint32_t RESERVED16[1]; /**< Reserved */ - __I uint32_t PHYRIS; /**< PHY Raw Interrupt Status */ - __IO uint32_t PHYIM; /**< PHY Interrupt Mask */ - __IO uint32_t PHYMISC; /**< PHY Masked Interrupt Status and Clear */ -} ETH_TypeDef; - -/** - * @} - */ - -/** - * @addtogroup Peripheral_memorymap - * @{ - */ - -#define SYSCTL_BASE 0x400FE000 -#define HIB_BASE 0x400FC000 -#define FLASH_BASE 0x400FD000 -#define EEPROM_BASE 0x400AF000 -#define UDMA_BASE 0x400FF000 -#define GPIOA_BASE 0x40058000 -#define GPIOB_BASE 0x40059000 -#define GPIOC_BASE 0x4005A000 -#define GPIOD_BASE 0x4005B000 -#define GPIOE_BASE 0x4005C000 -#define GPIOF_BASE 0x4005D000 -#define GPIOG_BASE 0x4005E000 -#define GPIOH_BASE 0x4005F000 -#define GPIOJ_BASE 0x40060000 -#define GPIOK_BASE 0x40061000 -#define GPIOL_BASE 0x40062000 -#define GPIOM_BASE 0x40063000 -#define GPION_BASE 0x40064000 -#define GPIOP_BASE 0x40065000 -#define GPIOQ_BASE 0x40066000 -#define GPIOR_BASE 0x40067000 -#define GPIOS_BASE 0x40068000 -#define GPIOT_BASE 0x40069000 -#define GPT0_BASE 0x40030000 -#define GPT1_BASE 0x40031000 -#define GPT2_BASE 0x40032000 -#define GPT3_BASE 0x40033000 -#define GPT4_BASE 0x40034000 -#define GPT5_BASE 0x40035000 -#define GPT6_BASE 0x400E0000 -#define GPT7_BASE 0x400E1000 -#define WDT0_BASE 0x40000000 -#define WDT1_BASE 0x40001000 -#define ADC0_BASE 0x40038000 -#define ADC1_BASE 0x40039000 -#define UART0_BASE 0x4000C000 -#define UART1_BASE 0x4000D000 -#define UART2_BASE 0x4000E000 -#define UART3_BASE 0x4000F000 -#define UART4_BASE 0x40010000 -#define UART5_BASE 0x40011000 -#define UART6_BASE 0x40012000 -#define UART7_BASE 0x40013000 -#define SSI0_BASE 0x40008000 -#define SSI1_BASE 0x40009000 -#define SSI2_BASE 0x4000A000 -#define SSI3_BASE 0x4000B000 -#define I2C0_BASE 0x40020000 -#define I2C1_BASE 0x40021000 -#define I2C2_BASE 0x40022000 -#define I2C3_BASE 0x40023000 -#define I2C4_BASE 0x400C0000 -#define I2C5_BASE 0x400C1000 -#define I2C6_BASE 0x400C2000 -#define I2C7_BASE 0x400C3000 -#define I2C8_BASE 0x400B8000 -#define I2C9_BASE 0x400B9000 -#define CAN0_BASE 0x40040000 -#define CAN1_BASE 0x40041000 -// usb -#define ACMP_BASE 0x4003C000 -#define PWM0_BASE 0x40028000 -#define QEI0_BASE 0x4002C000 -#define QEI1_BASE 0x4002D000 - -#define ETH_BASE 0x400EC000 - -/** - * @} - */ - -/** - * @addtogroup Peripheral_declaration - * @{ - */ - -#define SYSCTL ((SYSCTL_TypeDef *) SYSCTL_BASE) -#define HIB ((HIB_TypeDef *) HIB_BASE) -#define FLASH ((FLASH_TypeDef *) FLASH_BASE) -#define EEPROM ((EEPROM_TypeDef *) EEPROM_BASE) -#define UDMA ((UDMA_TypeDef *) UDMA_BASE) -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) -#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) -#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) -#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) -#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE) -#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE) -#define GPIOL ((GPIO_TypeDef *) GPIOL_BASE) -#define GPIOM ((GPIO_TypeDef *) GPIOM_BASE) -#define GPION ((GPIO_TypeDef *) GPION_BASE) -#define GPIOP ((GPIO_TypeDef *) GPIOP_BASE) -#define GPIOQ ((GPIO_TypeDef *) GPIOQ_BASE) -#define GPIOR ((GPIO_TypeDef *) GPIOR_BASE) -#define GPIOS ((GPIO_TypeDef *) GPIOS_BASE) -#define GPIOT ((GPIO_TypeDef *) GPIOT_BASE) -#define GPT0 ((GPT_TypeDef *) GPT0_BASE) -#define GPT1 ((GPT_TypeDef *) GPT1_BASE) -#define GPT2 ((GPT_TypeDef *) GPT2_BASE) -#define GPT3 ((GPT_TypeDef *) GPT3_BASE) -#define GPT4 ((GPT_TypeDef *) GPT4_BASE) -#define GPT5 ((GPT_TypeDef *) GPT5_BASE) -#define GPT6 ((GPT_TypeDef *) GPT6_BASE) -#define GPT7 ((GPT_TypeDef *) GPT7_BASE) -#define WDT0 ((WDT_TypeDef *) WDT0_BASE) -#define WDT1 ((WDT_TypeDef *) WDT1_BASE) -#define ADC0 ((ADC_TypeDef*) ADC0_BASE) -#define ADC1 ((ADC_TypeDef*) ADC1_BASE) -#define UART0 ((UART_TypeDef *) UART0_BASE) -#define UART1 ((UART_TypeDef *) UART1_BASE) -#define UART2 ((UART_TypeDef *) UART2_BASE) -#define UART3 ((UART_TypeDef *) UART3_BASE) -#define UART4 ((UART_TypeDef *) UART4_BASE) -#define UART5 ((UART_TypeDef *) UART5_BASE) -#define UART6 ((UART_TypeDef *) UART6_BASE) -#define UART7 ((UART_TypeDef *) UART7_BASE) -#define SSI0 ((SSI_TypeDef *) SSI0_BASE) -#define SSI1 ((SSI_TypeDef *) SSI1_BASE) -#define SSI2 ((SSI_TypeDef *) SSI2_BASE) -#define SSI3 ((SSI_TypeDef *) SSI3_BASE) -#define I2C0 ((I2C_TypeDef *) I2C0_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#define I2C3 ((I2C_TypeDef *) I2C3_BASE) -#define I2C4 ((I2C_TypeDef *) I2C4_BASE) -#define I2C5 ((I2C_TypeDef *) I2C5_BASE) -#define I2C6 ((I2C_TypeDef *) I2C6_BASE) -#define I2C7 ((I2C_TypeDef *) I2C7_BASE) -#define I2C8 ((I2C_TypeDef *) I2C8_BASE) -#define I2C9 ((I2C_TypeDef *) I2C9_BASE) -#define CAN0 ((CAN_TypeDef *) CAN0_BASE) -#define CAN1 ((CAN_TypeDef *) CAN1_BASE) -// usb -#define ACMP ((ACMP_TypeDef *) ACMP_BASE) -#define PWM0 ((PWM_TypeDef *) PWM0_BASE) -#define QEI0 ((QEI_TypeDef *) QEI0_BASE) -#define QEI1 ((QEI_TypeDef *) QEI1_BASE) - -#define ETH ((ETH_TypeDef *) ETH_BASE) - -/** - * @} - */ - -#endif /* __TM4C129x_H */ - -/** - * @} - */ - -/** - * @} - */ |