diff options
Diffstat (limited to 'os/hal/ports')
-rw-r--r-- | os/hal/ports/NRF51/NRF51822/nrf51.h | 1313 | ||||
-rw-r--r-- | os/hal/ports/NRF51/NRF51822/platform.mk | 8 |
2 files changed, 1321 insertions, 0 deletions
diff --git a/os/hal/ports/NRF51/NRF51822/nrf51.h b/os/hal/ports/NRF51/NRF51822/nrf51.h new file mode 100644 index 0000000..8a9cea2 --- /dev/null +++ b/os/hal/ports/NRF51/NRF51822/nrf51.h @@ -0,0 +1,1313 @@ +
+/****************************************************************************************************//**
+ * @file nrf51.h
+ *
+ * @brief CMSIS Cortex-M0 Peripheral Access Layer Header File for
+ * nrf51 from Nordic Semiconductor.
+ *
+ * @version V522
+ * @date 26. January 2015
+ *
+ * @note Generated with SVDConv V2.81d
+ * from CMSIS SVD File 'nrf51.xml' Version 522,
+ *
+ * @par Copyright (c) 2013, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Nordic Semiconductor ASA nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ *******************************************************************************************************/
+
+
+
+/** @addtogroup Nordic Semiconductor
+ * @{
+ */
+
+/** @addtogroup nrf51
+ * @{
+ */
+
+#ifndef NRF51_H
+#define NRF51_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* ------------------------- Interrupt Number Definition ------------------------ */
+
+typedef enum {
+/* ------------------- Cortex-M0 Processor Exceptions Numbers ------------------- */
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
+ NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
+ SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
+ DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
+ PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
+ SysTick_IRQn = -1, /*!< 15 System Tick Timer */
+/* ---------------------- nrf51 Specific Interrupt Numbers ---------------------- */
+ POWER_CLOCK_IRQn = 0, /*!< 0 POWER_CLOCK */
+ RADIO_IRQn = 1, /*!< 1 RADIO */
+ UART0_IRQn = 2, /*!< 2 UART0 */
+ SPI0_TWI0_IRQn = 3, /*!< 3 SPI0_TWI0 */
+ SPI1_TWI1_IRQn = 4, /*!< 4 SPI1_TWI1 */
+ GPIOTE_IRQn = 6, /*!< 6 GPIOTE */
+ ADC_IRQn = 7, /*!< 7 ADC */
+ TIMER0_IRQn = 8, /*!< 8 TIMER0 */
+ TIMER1_IRQn = 9, /*!< 9 TIMER1 */
+ TIMER2_IRQn = 10, /*!< 10 TIMER2 */
+ RTC0_IRQn = 11, /*!< 11 RTC0 */
+ TEMP_IRQn = 12, /*!< 12 TEMP */
+ RNG_IRQn = 13, /*!< 13 RNG */
+ ECB_IRQn = 14, /*!< 14 ECB */
+ CCM_AAR_IRQn = 15, /*!< 15 CCM_AAR */
+ WDT_IRQn = 16, /*!< 16 WDT */
+ RTC1_IRQn = 17, /*!< 17 RTC1 */
+ QDEC_IRQn = 18, /*!< 18 QDEC */
+ LPCOMP_IRQn = 19, /*!< 19 LPCOMP */
+ SWI0_IRQn = 20, /*!< 20 SWI0 */
+ SWI1_IRQn = 21, /*!< 21 SWI1 */
+ SWI2_IRQn = 22, /*!< 22 SWI2 */
+ SWI3_IRQn = 23, /*!< 23 SWI3 */
+ SWI4_IRQn = 24, /*!< 24 SWI4 */
+ SWI5_IRQn = 25 /*!< 25 SWI5 */
+} IRQn_Type;
+
+
+/** @addtogroup Configuration_of_CMSIS
+ * @{
+ */
+
+
+/* ================================================================================ */
+/* ================ Processor and Core Peripheral Section ================ */
+/* ================================================================================ */
+
+/* ----------------Configuration of the Cortex-M0 Processor and Core Peripherals---------------- */
+#define __CM0_REV 0x0301 /*!< Cortex-M0 Core Revision */
+#define __MPU_PRESENT 0 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+/** @} */ /* End of group Configuration_of_CMSIS */
+
+#include "core_cm0.h" /*!< Cortex-M0 processor and core peripherals */
+
+
+/* ================================================================================ */
+/* ================ Device Specific Peripheral Section ================ */
+/* ================================================================================ */
+
+
+/** @addtogroup Device_Peripheral_Registers
+ * @{
+ */
+
+
+/* ------------------- Start of section using anonymous unions ------------------ */
+#if defined(__CC_ARM)
+ #pragma push
+ #pragma anon_unions
+#elif defined(__ICCARM__)
+ #pragma language=extended
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+/* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning 586
+#else
+ #warning Not supported compiler type
+#endif
+
+
+typedef struct {
+ __IO uint32_t CPU0; /*!< Configurable priority configuration register for CPU0. */
+ __IO uint32_t SPIS1; /*!< Configurable priority configuration register for SPIS1. */
+ __IO uint32_t RADIO; /*!< Configurable priority configuration register for RADIO. */
+ __IO uint32_t ECB; /*!< Configurable priority configuration register for ECB. */
+ __IO uint32_t CCM; /*!< Configurable priority configuration register for CCM. */
+ __IO uint32_t AAR; /*!< Configurable priority configuration register for AAR. */
+} AMLI_RAMPRI_Type;
+
+typedef struct {
+ __IO uint32_t SCK; /*!< Pin select for SCK. */
+ __IO uint32_t MOSI; /*!< Pin select for MOSI. */
+ __IO uint32_t MISO; /*!< Pin select for MISO. */
+} SPIM_PSEL_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Data pointer. */
+ __IO uint32_t MAXCNT; /*!< Maximum number of buffer bytes to receive. */
+ __I uint32_t AMOUNT; /*!< Number of bytes received in the last transaction. */
+} SPIM_RXD_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Data pointer. */
+ __IO uint32_t MAXCNT; /*!< Maximum number of buffer bytes to send. */
+ __I uint32_t AMOUNT; /*!< Number of bytes sent in the last transaction. */
+} SPIM_TXD_Type;
+
+typedef struct {
+ __O uint32_t EN; /*!< Enable channel group. */
+ __O uint32_t DIS; /*!< Disable channel group. */
+} PPI_TASKS_CHG_Type;
+
+typedef struct {
+ __IO uint32_t EEP; /*!< Channel event end-point. */
+ __IO uint32_t TEP; /*!< Channel task end-point. */
+} PPI_CH_Type;
+
+
+/* ================================================================================ */
+/* ================ POWER ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Power Control. (POWER)
+ */
+
+typedef struct { /*!< POWER Structure */
+ __I uint32_t RESERVED0[30];
+ __O uint32_t TASKS_CONSTLAT; /*!< Enable constant latency mode. */
+ __O uint32_t TASKS_LOWPWR; /*!< Enable low power mode (variable latency). */
+ __I uint32_t RESERVED1[34];
+ __IO uint32_t EVENTS_POFWARN; /*!< Power failure warning. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __IO uint32_t RESETREAS; /*!< Reset reason. */
+ __I uint32_t RESERVED4[9];
+ __I uint32_t RAMSTATUS; /*!< Ram status register. */
+ __I uint32_t RESERVED5[53];
+ __O uint32_t SYSTEMOFF; /*!< System off register. */
+ __I uint32_t RESERVED6[3];
+ __IO uint32_t POFCON; /*!< Power failure configuration. */
+ __I uint32_t RESERVED7[2];
+ __IO uint32_t GPREGRET; /*!< General purpose retention register. This register is a retained
+ register. */
+ __I uint32_t RESERVED8;
+ __IO uint32_t RAMON; /*!< Ram on/off. */
+ __I uint32_t RESERVED9[7];
+ __IO uint32_t RESET; /*!< Pin reset functionality configuration register. This register
+ is a retained register. */
+ __I uint32_t RESERVED10[3];
+ __IO uint32_t RAMONB; /*!< Ram on/off. */
+ __I uint32_t RESERVED11[8];
+ __IO uint32_t DCDCEN; /*!< DCDC converter enable configuration register. */
+ __I uint32_t RESERVED12[291];
+ __IO uint32_t DCDCFORCE; /*!< DCDC power-up force register. */
+} NRF_POWER_Type;
+
+
+/* ================================================================================ */
+/* ================ CLOCK ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Clock control. (CLOCK)
+ */
+
+typedef struct { /*!< CLOCK Structure */
+ __O uint32_t TASKS_HFCLKSTART; /*!< Start HFCLK clock source. */
+ __O uint32_t TASKS_HFCLKSTOP; /*!< Stop HFCLK clock source. */
+ __O uint32_t TASKS_LFCLKSTART; /*!< Start LFCLK clock source. */
+ __O uint32_t TASKS_LFCLKSTOP; /*!< Stop LFCLK clock source. */
+ __O uint32_t TASKS_CAL; /*!< Start calibration of LFCLK RC oscillator. */
+ __O uint32_t TASKS_CTSTART; /*!< Start calibration timer. */
+ __O uint32_t TASKS_CTSTOP; /*!< Stop calibration timer. */
+ __I uint32_t RESERVED0[57];
+ __IO uint32_t EVENTS_HFCLKSTARTED; /*!< HFCLK oscillator started. */
+ __IO uint32_t EVENTS_LFCLKSTARTED; /*!< LFCLK oscillator started. */
+ __I uint32_t RESERVED1;
+ __IO uint32_t EVENTS_DONE; /*!< Calibration of LFCLK RC oscillator completed. */
+ __IO uint32_t EVENTS_CTTO; /*!< Calibration timer timeout. */
+ __I uint32_t RESERVED2[124];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[63];
+ __I uint32_t HFCLKRUN; /*!< Task HFCLKSTART trigger status. */
+ __I uint32_t HFCLKSTAT; /*!< High frequency clock status. */
+ __I uint32_t RESERVED4;
+ __I uint32_t LFCLKRUN; /*!< Task LFCLKSTART triggered status. */
+ __I uint32_t LFCLKSTAT; /*!< Low frequency clock status. */
+ __I uint32_t LFCLKSRCCOPY; /*!< Clock source for the LFCLK clock, set when task LKCLKSTART is
+ triggered. */
+ __I uint32_t RESERVED5[62];
+ __IO uint32_t LFCLKSRC; /*!< Clock source for the LFCLK clock. */
+ __I uint32_t RESERVED6[7];
+ __IO uint32_t CTIV; /*!< Calibration timer interval. */
+ __I uint32_t RESERVED7[5];
+ __IO uint32_t XTALFREQ; /*!< Crystal frequency. */
+} NRF_CLOCK_Type;
+
+
+/* ================================================================================ */
+/* ================ MPU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Memory Protection Unit. (MPU)
+ */
+
+typedef struct { /*!< MPU Structure */
+ __I uint32_t RESERVED0[330];
+ __IO uint32_t PERR0; /*!< Configuration of peripherals in mpu regions. */
+ __IO uint32_t RLENR0; /*!< Length of RAM region 0. */
+ __I uint32_t RESERVED1[52];
+ __IO uint32_t PROTENSET0; /*!< Erase and write protection bit enable set register. */
+ __IO uint32_t PROTENSET1; /*!< Erase and write protection bit enable set register. */
+ __IO uint32_t DISABLEINDEBUG; /*!< Disable erase and write protection mechanism in debug mode. */
+ __IO uint32_t PROTBLOCKSIZE; /*!< Erase and write protection block size. */
+} NRF_MPU_Type;
+
+
+/* ================================================================================ */
+/* ================ PU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Patch unit. (PU)
+ */
+
+typedef struct { /*!< PU Structure */
+ __I uint32_t RESERVED0[448];
+ __IO uint32_t REPLACEADDR[8]; /*!< Address of first instruction to replace. */
+ __I uint32_t RESERVED1[24];
+ __IO uint32_t PATCHADDR[8]; /*!< Relative address of patch instructions. */
+ __I uint32_t RESERVED2[24];
+ __IO uint32_t PATCHEN; /*!< Patch enable register. */
+ __IO uint32_t PATCHENSET; /*!< Patch enable register. */
+ __IO uint32_t PATCHENCLR; /*!< Patch disable register. */
+} NRF_PU_Type;
+
+
+/* ================================================================================ */
+/* ================ AMLI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AHB Multi-Layer Interface. (AMLI)
+ */
+
+typedef struct { /*!< AMLI Structure */
+ __I uint32_t RESERVED0[896];
+ AMLI_RAMPRI_Type RAMPRI; /*!< RAM configurable priority configuration structure. */
+} NRF_AMLI_Type;
+
+
+/* ================================================================================ */
+/* ================ RADIO ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief The radio. (RADIO)
+ */
+
+typedef struct { /*!< RADIO Structure */
+ __O uint32_t TASKS_TXEN; /*!< Enable radio in TX mode. */
+ __O uint32_t TASKS_RXEN; /*!< Enable radio in RX mode. */
+ __O uint32_t TASKS_START; /*!< Start radio. */
+ __O uint32_t TASKS_STOP; /*!< Stop radio. */
+ __O uint32_t TASKS_DISABLE; /*!< Disable radio. */
+ __O uint32_t TASKS_RSSISTART; /*!< Start the RSSI and take one sample of the receive signal strength. */
+ __O uint32_t TASKS_RSSISTOP; /*!< Stop the RSSI measurement. */
+ __O uint32_t TASKS_BCSTART; /*!< Start the bit counter. */
+ __O uint32_t TASKS_BCSTOP; /*!< Stop the bit counter. */
+ __I uint32_t RESERVED0[55];
+ __IO uint32_t EVENTS_READY; /*!< Ready event. */
+ __IO uint32_t EVENTS_ADDRESS; /*!< Address event. */
+ __IO uint32_t EVENTS_PAYLOAD; /*!< Payload event. */
+ __IO uint32_t EVENTS_END; /*!< End event. */
+ __IO uint32_t EVENTS_DISABLED; /*!< Disable event. */
+ __IO uint32_t EVENTS_DEVMATCH; /*!< A device address match occurred on the last received packet. */
+ __IO uint32_t EVENTS_DEVMISS; /*!< No device address match occurred on the last received packet. */
+ __IO uint32_t EVENTS_RSSIEND; /*!< Sampling of the receive signal strength complete. A new RSSI
+ sample is ready for readout at the RSSISAMPLE register. */
+ __I uint32_t RESERVED1[2];
+ __IO uint32_t EVENTS_BCMATCH; /*!< Bit counter reached bit count value specified in BCC register. */
+ __I uint32_t RESERVED2[53];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the radio. */
+ __I uint32_t RESERVED3[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED4[61];
+ __I uint32_t CRCSTATUS; /*!< CRC status of received packet. */
+ __I uint32_t CD; /*!< Carrier detect. */
+ __I uint32_t RXMATCH; /*!< Received address. */
+ __I uint32_t RXCRC; /*!< Received CRC. */
+ __I uint32_t DAI; /*!< Device address match index. */
+ __I uint32_t RESERVED5[60];
+ __IO uint32_t PACKETPTR; /*!< Packet pointer. Decision point: START task. */
+ __IO uint32_t FREQUENCY; /*!< Frequency. */
+ __IO uint32_t TXPOWER; /*!< Output power. */
+ __IO uint32_t MODE; /*!< Data rate and modulation. */
+ __IO uint32_t PCNF0; /*!< Packet configuration 0. */
+ __IO uint32_t PCNF1; /*!< Packet configuration 1. */
+ __IO uint32_t BASE0; /*!< Radio base address 0. Decision point: START task. */
+ __IO uint32_t BASE1; /*!< Radio base address 1. Decision point: START task. */
+ __IO uint32_t PREFIX0; /*!< Prefixes bytes for logical addresses 0 to 3. */
+ __IO uint32_t PREFIX1; /*!< Prefixes bytes for logical addresses 4 to 7. */
+ __IO uint32_t TXADDRESS; /*!< Transmit address select. */
+ __IO uint32_t RXADDRESSES; /*!< Receive address select. */
+ __IO uint32_t CRCCNF; /*!< CRC configuration. */
+ __IO uint32_t CRCPOLY; /*!< CRC polynomial. */
+ __IO uint32_t CRCINIT; /*!< CRC initial value. */
+ __IO uint32_t TEST; /*!< Test features enable register. */
+ __IO uint32_t TIFS; /*!< Inter Frame Spacing in microseconds. */
+ __I uint32_t RSSISAMPLE; /*!< RSSI sample. */
+ __I uint32_t RESERVED6;
+ __I uint32_t STATE; /*!< Current radio state. */
+ __IO uint32_t DATAWHITEIV; /*!< Data whitening initial value. */
+ __I uint32_t RESERVED7[2];
+ __IO uint32_t BCC; /*!< Bit counter compare. */
+ __I uint32_t RESERVED8[39];
+ __IO uint32_t DAB[8]; /*!< Device address base segment. */
+ __IO uint32_t DAP[8]; /*!< Device address prefix. */
+ __IO uint32_t DACNF; /*!< Device address match configuration. */
+ __I uint32_t RESERVED9[56];
+ __IO uint32_t OVERRIDE0; /*!< Trim value override register 0. */
+ __IO uint32_t OVERRIDE1; /*!< Trim value override register 1. */
+ __IO uint32_t OVERRIDE2; /*!< Trim value override register 2. */
+ __IO uint32_t OVERRIDE3; /*!< Trim value override register 3. */
+ __IO uint32_t OVERRIDE4; /*!< Trim value override register 4. */
+ __I uint32_t RESERVED10[561];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RADIO_Type;
+
+
+/* ================================================================================ */
+/* ================ UART ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Universal Asynchronous Receiver/Transmitter. (UART)
+ */
+
+typedef struct { /*!< UART Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start UART receiver. */
+ __O uint32_t TASKS_STOPRX; /*!< Stop UART receiver. */
+ __O uint32_t TASKS_STARTTX; /*!< Start UART transmitter. */
+ __O uint32_t TASKS_STOPTX; /*!< Stop UART transmitter. */
+ __I uint32_t RESERVED0[3];
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend UART. */
+ __I uint32_t RESERVED1[56];
+ __IO uint32_t EVENTS_CTS; /*!< CTS activated. */
+ __IO uint32_t EVENTS_NCTS; /*!< CTS deactivated. */
+ __IO uint32_t EVENTS_RXDRDY; /*!< Data received in RXD. */
+ __I uint32_t RESERVED2[4];
+ __IO uint32_t EVENTS_TXDRDY; /*!< Data sent from TXD. */
+ __I uint32_t RESERVED3;
+ __IO uint32_t EVENTS_ERROR; /*!< Error detected. */
+ __I uint32_t RESERVED4[7];
+ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */
+ __I uint32_t RESERVED5[46];
+ __IO uint32_t SHORTS; /*!< Shortcuts for UART. */
+ __I uint32_t RESERVED6[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED7[93];
+ __IO uint32_t ERRORSRC; /*!< Error source. Write error field to 1 to clear error. */
+ __I uint32_t RESERVED8[31];
+ __IO uint32_t ENABLE; /*!< Enable UART and acquire IOs. */
+ __I uint32_t RESERVED9;
+ __IO uint32_t PSELRTS; /*!< Pin select for RTS. */
+ __IO uint32_t PSELTXD; /*!< Pin select for TXD. */
+ __IO uint32_t PSELCTS; /*!< Pin select for CTS. */
+ __IO uint32_t PSELRXD; /*!< Pin select for RXD. */
+ __I uint32_t RXD; /*!< RXD register. On read action the buffer pointer is displaced.
+ Once read the character is consumed. If read when no character
+ available, the UART will stop working. */
+ __O uint32_t TXD; /*!< TXD register. */
+ __I uint32_t RESERVED10;
+ __IO uint32_t BAUDRATE; /*!< UART Baudrate. */
+ __I uint32_t RESERVED11[17];
+ __IO uint32_t CONFIG; /*!< Configuration of parity and hardware flow control register. */
+ __I uint32_t RESERVED12[675];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_UART_Type;
+
+
+/* ================================================================================ */
+/* ================ SPI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI master 0. (SPI)
+ */
+
+typedef struct { /*!< SPI Structure */
+ __I uint32_t RESERVED0[66];
+ __IO uint32_t EVENTS_READY; /*!< TXD byte sent and RXD byte received. */
+ __I uint32_t RESERVED1[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[125];
+ __IO uint32_t ENABLE; /*!< Enable SPI. */
+ __I uint32_t RESERVED3;
+ __IO uint32_t PSELSCK; /*!< Pin select for SCK. */
+ __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */
+ __IO uint32_t PSELMISO; /*!< Pin select for MISO. */
+ __I uint32_t RESERVED4;
+ __I uint32_t RXD; /*!< RX data. */
+ __IO uint32_t TXD; /*!< TX data. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t FREQUENCY; /*!< SPI frequency */
+ __I uint32_t RESERVED6[11];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED7[681];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_SPI_Type;
+
+
+/* ================================================================================ */
+/* ================ TWI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Two-wire interface master 0. (TWI)
+ */
+
+typedef struct { /*!< TWI Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start 2-Wire master receive sequence. */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STARTTX; /*!< Start 2-Wire master transmit sequence. */
+ __I uint32_t RESERVED1[2];
+ __O uint32_t TASKS_STOP; /*!< Stop 2-Wire transaction. */
+ __I uint32_t RESERVED2;
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend 2-Wire transaction. */
+ __O uint32_t TASKS_RESUME; /*!< Resume 2-Wire transaction. */
+ __I uint32_t RESERVED3[56];
+ __IO uint32_t EVENTS_STOPPED; /*!< Two-wire stopped. */
+ __IO uint32_t EVENTS_RXDREADY; /*!< Two-wire ready to deliver new RXD byte received. */
+ __I uint32_t RESERVED4[4];
+ __IO uint32_t EVENTS_TXDSENT; /*!< Two-wire finished sending last TXD byte. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t EVENTS_ERROR; /*!< Two-wire error detected. */
+ __I uint32_t RESERVED6[4];
+ __IO uint32_t EVENTS_BB; /*!< Two-wire byte boundary. */
+ __I uint32_t RESERVED7[3];
+ __IO uint32_t EVENTS_SUSPENDED; /*!< Two-wire suspended. */
+ __I uint32_t RESERVED8[45];
+ __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */
+ __I uint32_t RESERVED9[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED10[110];
+ __IO uint32_t ERRORSRC; /*!< Two-wire error source. Write error field to 1 to clear error. */
+ __I uint32_t RESERVED11[14];
+ __IO uint32_t ENABLE; /*!< Enable two-wire master. */
+ __I uint32_t RESERVED12;
+ __IO uint32_t PSELSCL; /*!< Pin select for SCL. */
+ __IO uint32_t PSELSDA; /*!< Pin select for SDA. */
+ __I uint32_t RESERVED13[2];
+ __I uint32_t RXD; /*!< RX data register. */
+ __IO uint32_t TXD; /*!< TX data register. */
+ __I uint32_t RESERVED14;
+ __IO uint32_t FREQUENCY; /*!< Two-wire frequency. */
+ __I uint32_t RESERVED15[24];
+ __IO uint32_t ADDRESS; /*!< Address used in the two-wire transfer. */
+ __I uint32_t RESERVED16[668];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TWI_Type;
+
+
+/* ================================================================================ */
+/* ================ SPIS ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI slave 1. (SPIS)
+ */
+
+typedef struct { /*!< SPIS Structure */
+ __I uint32_t RESERVED0[9];
+ __O uint32_t TASKS_ACQUIRE; /*!< Acquire SPI semaphore. */
+ __O uint32_t TASKS_RELEASE; /*!< Release SPI semaphore. */
+ __I uint32_t RESERVED1[54];
+ __IO uint32_t EVENTS_END; /*!< Granted transaction completed. */
+ __I uint32_t RESERVED2[8];
+ __IO uint32_t EVENTS_ACQUIRED; /*!< Semaphore acquired. */
+ __I uint32_t RESERVED3[53];
+ __IO uint32_t SHORTS; /*!< Shortcuts for SPIS. */
+ __I uint32_t RESERVED4[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED5[61];
+ __I uint32_t SEMSTAT; /*!< Semaphore status. */
+ __I uint32_t RESERVED6[15];
+ __IO uint32_t STATUS; /*!< Status from last transaction. */
+ __I uint32_t RESERVED7[47];
+ __IO uint32_t ENABLE; /*!< Enable SPIS. */
+ __I uint32_t RESERVED8;
+ __IO uint32_t PSELSCK; /*!< Pin select for SCK. */
+ __IO uint32_t PSELMISO; /*!< Pin select for MISO. */
+ __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */
+ __IO uint32_t PSELCSN; /*!< Pin select for CSN. */
+ __I uint32_t RESERVED9[7];
+ __IO uint32_t RXDPTR; /*!< RX data pointer. */
+ __IO uint32_t MAXRX; /*!< Maximum number of bytes in the receive buffer. */
+ __I uint32_t AMOUNTRX; /*!< Number of bytes received in last granted transaction. */
+ __I uint32_t RESERVED10;
+ __IO uint32_t TXDPTR; /*!< TX data pointer. */
+ __IO uint32_t MAXTX; /*!< Maximum number of bytes in the transmit buffer. */
+ __I uint32_t AMOUNTTX; /*!< Number of bytes transmitted in last granted transaction. */
+ __I uint32_t RESERVED11;
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED12;
+ __IO uint32_t DEF; /*!< Default character. */
+ __I uint32_t RESERVED13[24];
+ __IO uint32_t ORC; /*!< Over-read character. */
+ __I uint32_t RESERVED14[654];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_SPIS_Type;
+
+
+/* ================================================================================ */
+/* ================ SPIM ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI master with easyDMA 1. (SPIM)
+ */
+
+typedef struct { /*!< SPIM Structure */
+ __I uint32_t RESERVED0[4];
+ __O uint32_t TASKS_START; /*!< Start SPI transaction. */
+ __O uint32_t TASKS_STOP; /*!< Stop SPI transaction. */
+ __I uint32_t RESERVED1;
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend SPI transaction. */
+ __O uint32_t TASKS_RESUME; /*!< Resume SPI transaction. */
+ __I uint32_t RESERVED2[56];
+ __IO uint32_t EVENTS_STOPPED; /*!< SPI transaction has stopped. */
+ __I uint32_t RESERVED3[2];
+ __IO uint32_t EVENTS_ENDRX; /*!< End of RXD buffer reached. */
+ __I uint32_t RESERVED4;
+ __IO uint32_t EVENTS_END; /*!< End of RXD buffer and TXD buffer reached. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t EVENTS_ENDTX; /*!< End of TXD buffer reached. */
+ __I uint32_t RESERVED6[10];
+ __IO uint32_t EVENTS_STARTED; /*!< Transaction started. */
+ __I uint32_t RESERVED7[44];
+ __IO uint32_t SHORTS; /*!< Shortcuts for SPIM. */
+ __I uint32_t RESERVED8[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED9[125];
+ __IO uint32_t ENABLE; /*!< Enable SPIM. */
+ __I uint32_t RESERVED10;
+ SPIM_PSEL_Type PSEL; /*!< Pin select configuration. */
+ __I uint32_t RESERVED11[4];
+ __IO uint32_t FREQUENCY; /*!< SPI frequency. */
+ __I uint32_t RESERVED12[3];
+ SPIM_RXD_Type RXD; /*!< RXD EasyDMA configuration and status. */
+ __I uint32_t RESERVED13;
+ SPIM_TXD_Type TXD; /*!< TXD EasyDMA configuration and status. */
+ __I uint32_t RESERVED14;
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED15[26];
+ __IO uint32_t ORC; /*!< Over-read character. */
+ __I uint32_t RESERVED16[654];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_SPIM_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIOTE ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief GPIO tasks and events. (GPIOTE)
+ */
+
+typedef struct { /*!< GPIOTE Structure */
+ __O uint32_t TASKS_OUT[4]; /*!< Tasks asssociated with GPIOTE channels. */
+ __I uint32_t RESERVED0[60];
+ __IO uint32_t EVENTS_IN[4]; /*!< Tasks asssociated with GPIOTE channels. */
+ __I uint32_t RESERVED1[27];
+ __IO uint32_t EVENTS_PORT; /*!< Event generated from multiple pins. */
+ __I uint32_t RESERVED2[97];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[129];
+ __IO uint32_t CONFIG[4]; /*!< Channel configuration registers. */
+ __I uint32_t RESERVED4[695];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_GPIOTE_Type;
+
+
+/* ================================================================================ */
+/* ================ ADC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Analog to digital converter. (ADC)
+ */
+
+typedef struct { /*!< ADC Structure */
+ __O uint32_t TASKS_START; /*!< Start an ADC conversion. */
+ __O uint32_t TASKS_STOP; /*!< Stop ADC. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_END; /*!< ADC conversion complete. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[61];
+ __I uint32_t BUSY; /*!< ADC busy register. */
+ __I uint32_t RESERVED3[63];
+ __IO uint32_t ENABLE; /*!< ADC enable. */
+ __IO uint32_t CONFIG; /*!< ADC configuration register. */
+ __I uint32_t RESULT; /*!< Result of ADC conversion. */
+ __I uint32_t RESERVED4[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_ADC_Type;
+
+
+/* ================================================================================ */
+/* ================ TIMER ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Timer 0. (TIMER)
+ */
+
+typedef struct { /*!< TIMER Structure */
+ __O uint32_t TASKS_START; /*!< Start Timer. */
+ __O uint32_t TASKS_STOP; /*!< Stop Timer. */
+ __O uint32_t TASKS_COUNT; /*!< Increment Timer (In counter mode). */
+ __O uint32_t TASKS_CLEAR; /*!< Clear timer. */
+ __O uint32_t TASKS_SHUTDOWN; /*!< Shutdown timer. */
+ __I uint32_t RESERVED0[11];
+ __O uint32_t TASKS_CAPTURE[4]; /*!< Capture Timer value to CC[n] registers. */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */
+ __I uint32_t RESERVED2[44];
+ __IO uint32_t SHORTS; /*!< Shortcuts for Timer. */
+ __I uint32_t RESERVED3[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED4[126];
+ __IO uint32_t MODE; /*!< Timer Mode selection. */
+ __IO uint32_t BITMODE; /*!< Sets timer behaviour. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t PRESCALER; /*!< 4-bit prescaler to source clock frequency (max value 9). Source
+ clock frequency is divided by 2^SCALE. */
+ __I uint32_t RESERVED6[11];
+ __IO uint32_t CC[4]; /*!< Capture/compare registers. */
+ __I uint32_t RESERVED7[683];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TIMER_Type;
+
+
+/* ================================================================================ */
+/* ================ RTC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Real time counter 0. (RTC)
+ */
+
+typedef struct { /*!< RTC Structure */
+ __O uint32_t TASKS_START; /*!< Start RTC Counter. */
+ __O uint32_t TASKS_STOP; /*!< Stop RTC Counter. */
+ __O uint32_t TASKS_CLEAR; /*!< Clear RTC Counter. */
+ __O uint32_t TASKS_TRIGOVRFLW; /*!< Set COUNTER to 0xFFFFFFF0. */
+ __I uint32_t RESERVED0[60];
+ __IO uint32_t EVENTS_TICK; /*!< Event on COUNTER increment. */
+ __IO uint32_t EVENTS_OVRFLW; /*!< Event on COUNTER overflow. */
+ __I uint32_t RESERVED1[14];
+ __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */
+ __I uint32_t RESERVED2[109];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[13];
+ __IO uint32_t EVTEN; /*!< Configures event enable routing to PPI for each RTC event. */
+ __IO uint32_t EVTENSET; /*!< Enable events routing to PPI. The reading of this register gives
+ the value of EVTEN. */
+ __IO uint32_t EVTENCLR; /*!< Disable events routing to PPI. The reading of this register
+ gives the value of EVTEN. */
+ __I uint32_t RESERVED4[110];
+ __I uint32_t COUNTER; /*!< Current COUNTER value. */
+ __IO uint32_t PRESCALER; /*!< 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)).
+ Must be written when RTC is STOPed. */
+ __I uint32_t RESERVED5[13];
+ __IO uint32_t CC[4]; /*!< Capture/compare registers. */
+ __I uint32_t RESERVED6[683];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RTC_Type;
+
+
+/* ================================================================================ */
+/* ================ TEMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Temperature Sensor. (TEMP)
+ */
+
+typedef struct { /*!< TEMP Structure */
+ __O uint32_t TASKS_START; /*!< Start temperature measurement. */
+ __O uint32_t TASKS_STOP; /*!< Stop temperature measurement. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_DATARDY; /*!< Temperature measurement complete, data ready event. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[127];
+ __I int32_t TEMP; /*!< Die temperature in degC, 2's complement format, 0.25 degC pecision. */
+ __I uint32_t RESERVED3[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TEMP_Type;
+
+
+/* ================================================================================ */
+/* ================ RNG ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Random Number Generator. (RNG)
+ */
+
+typedef struct { /*!< RNG Structure */
+ __O uint32_t TASKS_START; /*!< Start the random number generator. */
+ __O uint32_t TASKS_STOP; /*!< Stop the random number generator. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_VALRDY; /*!< New random number generated and written to VALUE register. */
+ __I uint32_t RESERVED1[63];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the RNG. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register */
+ __I uint32_t RESERVED3[126];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t VALUE; /*!< RNG random number. */
+ __I uint32_t RESERVED4[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RNG_Type;
+
+
+/* ================================================================================ */
+/* ================ ECB ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AES ECB Mode Encryption. (ECB)
+ */
+
+typedef struct { /*!< ECB Structure */
+ __O uint32_t TASKS_STARTECB; /*!< Start ECB block encrypt. If a crypto operation is running, this
+ will not initiate a new encryption and the ERRORECB event will
+ be triggered. */
+ __O uint32_t TASKS_STOPECB; /*!< Stop current ECB encryption. If a crypto operation is running,
+ this will will trigger the ERRORECB event. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_ENDECB; /*!< ECB block encrypt complete. */
+ __IO uint32_t EVENTS_ERRORECB; /*!< ECB block encrypt aborted due to a STOPECB task or due to an
+ error. */
+ __I uint32_t RESERVED1[127];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t ECBDATAPTR; /*!< ECB block encrypt memory pointer. */
+ __I uint32_t RESERVED3[701];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_ECB_Type;
+
+
+/* ================================================================================ */
+/* ================ AAR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Accelerated Address Resolver. (AAR)
+ */
+
+typedef struct { /*!< AAR Structure */
+ __O uint32_t TASKS_START; /*!< Start resolving addresses based on IRKs specified in the IRK
+ data structure. */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STOP; /*!< Stop resolving addresses. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t EVENTS_END; /*!< Address resolution procedure completed. */
+ __IO uint32_t EVENTS_RESOLVED; /*!< Address resolved. */
+ __IO uint32_t EVENTS_NOTRESOLVED; /*!< Address not resolved. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t STATUS; /*!< Resolution status. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable AAR. */
+ __IO uint32_t NIRK; /*!< Number of Identity root Keys in the IRK data structure. */
+ __IO uint32_t IRKPTR; /*!< Pointer to the IRK data structure. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t ADDRPTR; /*!< Pointer to the resolvable address (6 bytes). */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage
+ during resolution. A minimum of 3 bytes must be reserved. */
+ __I uint32_t RESERVED6[697];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_AAR_Type;
+
+
+/* ================================================================================ */
+/* ================ CCM ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AES CCM Mode Encryption. (CCM)
+ */
+
+typedef struct { /*!< CCM Structure */
+ __O uint32_t TASKS_KSGEN; /*!< Start generation of key-stream. This operation will stop by
+ itself when completed. */
+ __O uint32_t TASKS_CRYPT; /*!< Start encrypt/decrypt. This operation will stop by itself when
+ completed. */
+ __O uint32_t TASKS_STOP; /*!< Stop encrypt/decrypt. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_ENDKSGEN; /*!< Keystream generation completed. */
+ __IO uint32_t EVENTS_ENDCRYPT; /*!< Encrypt/decrypt completed. */
+ __IO uint32_t EVENTS_ERROR; /*!< Error happened. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the CCM. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t MICSTATUS; /*!< CCM RX MIC check result. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< CCM enable. */
+ __IO uint32_t MODE; /*!< Operation mode. */
+ __IO uint32_t CNFPTR; /*!< Pointer to a data structure holding AES key and NONCE vector. */
+ __IO uint32_t INPTR; /*!< Pointer to the input packet. */
+ __IO uint32_t OUTPTR; /*!< Pointer to the output packet. */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage
+ during resolution. A minimum of 43 bytes must be reserved. */
+ __I uint32_t RESERVED5[697];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_CCM_Type;
+
+
+/* ================================================================================ */
+/* ================ WDT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Watchdog Timer. (WDT)
+ */
+
+typedef struct { /*!< WDT Structure */
+ __O uint32_t TASKS_START; /*!< Start the watchdog. */
+ __I uint32_t RESERVED0[63];
+ __IO uint32_t EVENTS_TIMEOUT; /*!< Watchdog timeout. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[61];
+ __I uint32_t RUNSTATUS; /*!< Watchdog running status. */
+ __I uint32_t REQSTATUS; /*!< Request status. */
+ __I uint32_t RESERVED3[63];
+ __IO uint32_t CRV; /*!< Counter reload value in number of 32kiHz clock cycles. */
+ __IO uint32_t RREN; /*!< Reload request enable. */
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED4[60];
+ __O uint32_t RR[8]; /*!< Reload requests registers. */
+ __I uint32_t RESERVED5[631];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_WDT_Type;
+
+
+/* ================================================================================ */
+/* ================ QDEC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Rotary decoder. (QDEC)
+ */
+
+typedef struct { /*!< QDEC Structure */
+ __O uint32_t TASKS_START; /*!< Start the quadrature decoder. */
+ __O uint32_t TASKS_STOP; /*!< Stop the quadrature decoder. */
+ __O uint32_t TASKS_READCLRACC; /*!< Transfers the content from ACC registers to ACCREAD registers,
+ and clears the ACC registers. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_SAMPLERDY; /*!< A new sample is written to the sample register. */
+ __IO uint32_t EVENTS_REPORTRDY; /*!< REPORTPER number of samples accumulated in ACC register, and
+ ACC register different than zero. */
+ __IO uint32_t EVENTS_ACCOF; /*!< ACC or ACCDBL register overflow. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the QDEC. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[125];
+ __IO uint32_t ENABLE; /*!< Enable the QDEC. */
+ __IO uint32_t LEDPOL; /*!< LED output pin polarity. */
+ __IO uint32_t SAMPLEPER; /*!< Sample period. */
+ __I int32_t SAMPLE; /*!< Motion sample value. */
+ __IO uint32_t REPORTPER; /*!< Number of samples to generate an EVENT_REPORTRDY. */
+ __I int32_t ACC; /*!< Accumulated valid transitions register. */
+ __I int32_t ACCREAD; /*!< Snapshot of ACC register. Value generated by the TASKS_READCLEACC
+ task. */
+ __IO uint32_t PSELLED; /*!< Pin select for LED output. */
+ __IO uint32_t PSELA; /*!< Pin select for phase A input. */
+ __IO uint32_t PSELB; /*!< Pin select for phase B input. */
+ __IO uint32_t DBFEN; /*!< Enable debouncer input filters. */
+ __I uint32_t RESERVED4[5];
+ __IO uint32_t LEDPRE; /*!< Time LED is switched ON before the sample. */
+ __I uint32_t ACCDBL; /*!< Accumulated double (error) transitions register. */
+ __I uint32_t ACCDBLREAD; /*!< Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC
+ task. */
+ __I uint32_t RESERVED5[684];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_QDEC_Type;
+
+
+/* ================================================================================ */
+/* ================ LPCOMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Low power comparator. (LPCOMP)
+ */
+
+typedef struct { /*!< LPCOMP Structure */
+ __O uint32_t TASKS_START; /*!< Start the comparator. */
+ __O uint32_t TASKS_STOP; /*!< Stop the comparator. */
+ __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_READY; /*!< LPCOMP is ready and output is valid. */
+ __IO uint32_t EVENTS_DOWN; /*!< Input voltage crossed the threshold going down. */
+ __IO uint32_t EVENTS_UP; /*!< Input voltage crossed the threshold going up. */
+ __IO uint32_t EVENTS_CROSS; /*!< Input voltage crossed the threshold in any direction. */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the LPCOMP. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t RESULT; /*!< Result of last compare. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable the LPCOMP. */
+ __IO uint32_t PSEL; /*!< Input pin select. */
+ __IO uint32_t REFSEL; /*!< Reference select. */
+ __IO uint32_t EXTREFSEL; /*!< External reference select. */
+ __I uint32_t RESERVED5[4];
+ __IO uint32_t ANADETECT; /*!< Analog detect configuration. */
+ __I uint32_t RESERVED6[694];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_LPCOMP_Type;
+
+
+/* ================================================================================ */
+/* ================ SWI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SW Interrupts. (SWI)
+ */
+
+typedef struct { /*!< SWI Structure */
+ __I uint32_t UNUSED; /*!< Unused. */
+} NRF_SWI_Type;
+
+
+/* ================================================================================ */
+/* ================ NVMC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Non Volatile Memory Controller. (NVMC)
+ */
+
+typedef struct { /*!< NVMC Structure */
+ __I uint32_t RESERVED0[256];
+ __I uint32_t READY; /*!< Ready flag. */
+ __I uint32_t RESERVED1[64];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+
+ union {
+ __IO uint32_t ERASEPCR1; /*!< Register for erasing a non-protected non-volatile memory page. */
+ __IO uint32_t ERASEPAGE; /*!< Register for erasing a non-protected non-volatile memory page. */
+ };
+ __IO uint32_t ERASEALL; /*!< Register for erasing all non-volatile user memory. */
+
+ union {
+ __IO uint32_t ERASEPCR0; /*!< Register for erasing a protected non-volatile memory page. */
+ __IO uint32_t ERASEPROTECTEDPAGE; /*!< Register for erasing a protected non-volatile memory page. */
+ };
+ __IO uint32_t ERASEUICR; /*!< Register for start erasing User Information Congfiguration Registers. */
+} NRF_NVMC_Type;
+
+
+/* ================================================================================ */
+/* ================ PPI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief PPI controller. (PPI)
+ */
+
+typedef struct { /*!< PPI Structure */
+ PPI_TASKS_CHG_Type TASKS_CHG[4]; /*!< Channel group tasks. */
+ __I uint32_t RESERVED0[312];
+ __IO uint32_t CHEN; /*!< Channel enable. */
+ __IO uint32_t CHENSET; /*!< Channel enable set. */
+ __IO uint32_t CHENCLR; /*!< Channel enable clear. */
+ __I uint32_t RESERVED1;
+ PPI_CH_Type CH[16]; /*!< PPI Channel. */
+ __I uint32_t RESERVED2[156];
+ __IO uint32_t CHG[4]; /*!< Channel group configuration. */
+} NRF_PPI_Type;
+
+
+/* ================================================================================ */
+/* ================ FICR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Factory Information Configuration. (FICR)
+ */
+
+typedef struct { /*!< FICR Structure */
+ __I uint32_t RESERVED0[4];
+ __I uint32_t CODEPAGESIZE; /*!< Code memory page size in bytes. */
+ __I uint32_t CODESIZE; /*!< Code memory size in pages. */
+ __I uint32_t RESERVED1[4];
+ __I uint32_t CLENR0; /*!< Length of code region 0 in bytes. */
+ __I uint32_t PPFC; /*!< Pre-programmed factory code present. */
+ __I uint32_t RESERVED2;
+ __I uint32_t NUMRAMBLOCK; /*!< Number of individualy controllable RAM blocks. */
+
+ union {
+ __I uint32_t SIZERAMBLOCK[4]; /*!< Deprecated array of size of RAM block in bytes. This name is
+ kept for backward compatinility purposes. Use SIZERAMBLOCKS
+ instead. */
+ __I uint32_t SIZERAMBLOCKS; /*!< Size of RAM blocks in bytes. */
+ };
+ __I uint32_t RESERVED3[5];
+ __I uint32_t CONFIGID; /*!< Configuration identifier. */
+ __I uint32_t DEVICEID[2]; /*!< Device identifier. */
+ __I uint32_t RESERVED4[6];
+ __I uint32_t ER[4]; /*!< Encryption root. */
+ __I uint32_t IR[4]; /*!< Identity root. */
+ __I uint32_t DEVICEADDRTYPE; /*!< Device address type. */
+ __I uint32_t DEVICEADDR[2]; /*!< Device address. */
+ __I uint32_t OVERRIDEEN; /*!< Radio calibration override enable. */
+ __I uint32_t NRF_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for NRF_1Mbit
+ mode. */
+ __I uint32_t RESERVED5[10];
+ __I uint32_t BLE_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for BLE_1Mbit
+ mode. */
+} NRF_FICR_Type;
+
+
+/* ================================================================================ */
+/* ================ UICR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief User Information Configuration. (UICR)
+ */
+
+typedef struct { /*!< UICR Structure */
+ __IO uint32_t CLENR0; /*!< Length of code region 0. */
+ __IO uint32_t RBPCONF; /*!< Readback protection configuration. */
+ __IO uint32_t XTALFREQ; /*!< Reset value for CLOCK XTALFREQ register. */
+ __I uint32_t RESERVED0;
+ __I uint32_t FWID; /*!< Firmware ID. */
+
+ union {
+ __IO uint32_t NRFFW[15]; /*!< Reserved for Nordic firmware design. */
+ __IO uint32_t BOOTLOADERADDR; /*!< Bootloader start address. */
+ };
+ __IO uint32_t NRFHW[12]; /*!< Reserved for Nordic hardware design. */
+ __IO uint32_t CUSTOMER[32]; /*!< Reserved for customer. */
+} NRF_UICR_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIO ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief General purpose input and output. (GPIO)
+ */
+
+typedef struct { /*!< GPIO Structure */
+ __I uint32_t RESERVED0[321];
+ __IO uint32_t OUT; /*!< Write GPIO port. */
+ __IO uint32_t OUTSET; /*!< Set individual bits in GPIO port. */
+ __IO uint32_t OUTCLR; /*!< Clear individual bits in GPIO port. */
+ __I uint32_t IN; /*!< Read GPIO port. */
+ __IO uint32_t DIR; /*!< Direction of GPIO pins. */
+ __IO uint32_t DIRSET; /*!< DIR set register. */
+ __IO uint32_t DIRCLR; /*!< DIR clear register. */
+ __I uint32_t RESERVED1[120];
+ __IO uint32_t PIN_CNF[32]; /*!< Configuration of GPIO pins. */
+} NRF_GPIO_Type;
+
+
+/* -------------------- End of section using anonymous unions ------------------- */
+#if defined(__CC_ARM)
+ #pragma pop
+#elif defined(__ICCARM__)
+ /* leave anonymous unions enabled */
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning restore
+#else
+ #warning Not supported compiler type
+#endif
+
+
+
+
+/* ================================================================================ */
+/* ================ Peripheral memory map ================ */
+/* ================================================================================ */
+
+#define NRF_POWER_BASE 0x40000000UL
+#define NRF_CLOCK_BASE 0x40000000UL
+#define NRF_MPU_BASE 0x40000000UL
+#define NRF_PU_BASE 0x40000000UL
+#define NRF_AMLI_BASE 0x40000000UL
+#define NRF_RADIO_BASE 0x40001000UL
+#define NRF_UART0_BASE 0x40002000UL
+#define NRF_SPI0_BASE 0x40003000UL
+#define NRF_TWI0_BASE 0x40003000UL
+#define NRF_SPI1_BASE 0x40004000UL
+#define NRF_TWI1_BASE 0x40004000UL
+#define NRF_SPIS1_BASE 0x40004000UL
+#define NRF_SPIM1_BASE 0x40004000UL
+#define NRF_GPIOTE_BASE 0x40006000UL
+#define NRF_ADC_BASE 0x40007000UL
+#define NRF_TIMER0_BASE 0x40008000UL
+#define NRF_TIMER1_BASE 0x40009000UL
+#define NRF_TIMER2_BASE 0x4000A000UL
+#define NRF_RTC0_BASE 0x4000B000UL
+#define NRF_TEMP_BASE 0x4000C000UL
+#define NRF_RNG_BASE 0x4000D000UL
+#define NRF_ECB_BASE 0x4000E000UL
+#define NRF_AAR_BASE 0x4000F000UL
+#define NRF_CCM_BASE 0x4000F000UL
+#define NRF_WDT_BASE 0x40010000UL
+#define NRF_RTC1_BASE 0x40011000UL
+#define NRF_QDEC_BASE 0x40012000UL
+#define NRF_LPCOMP_BASE 0x40013000UL
+#define NRF_SWI_BASE 0x40014000UL
+#define NRF_NVMC_BASE 0x4001E000UL
+#define NRF_PPI_BASE 0x4001F000UL
+#define NRF_FICR_BASE 0x10000000UL
+#define NRF_UICR_BASE 0x10001000UL
+#define NRF_GPIO_BASE 0x50000000UL
+
+
+/* ================================================================================ */
+/* ================ Peripheral declaration ================ */
+/* ================================================================================ */
+
+#define NRF_POWER ((NRF_POWER_Type *) NRF_POWER_BASE)
+#define NRF_CLOCK ((NRF_CLOCK_Type *) NRF_CLOCK_BASE)
+#define NRF_MPU ((NRF_MPU_Type *) NRF_MPU_BASE)
+#define NRF_PU ((NRF_PU_Type *) NRF_PU_BASE)
+#define NRF_AMLI ((NRF_AMLI_Type *) NRF_AMLI_BASE)
+#define NRF_RADIO ((NRF_RADIO_Type *) NRF_RADIO_BASE)
+#define NRF_UART0 ((NRF_UART_Type *) NRF_UART0_BASE)
+#define NRF_SPI0 ((NRF_SPI_Type *) NRF_SPI0_BASE)
+#define NRF_TWI0 ((NRF_TWI_Type *) NRF_TWI0_BASE)
+#define NRF_SPI1 ((NRF_SPI_Type *) NRF_SPI1_BASE)
+#define NRF_TWI1 ((NRF_TWI_Type *) NRF_TWI1_BASE)
+#define NRF_SPIS1 ((NRF_SPIS_Type *) NRF_SPIS1_BASE)
+#define NRF_SPIM1 ((NRF_SPIM_Type *) NRF_SPIM1_BASE)
+#define NRF_GPIOTE ((NRF_GPIOTE_Type *) NRF_GPIOTE_BASE)
+#define NRF_ADC ((NRF_ADC_Type *) NRF_ADC_BASE)
+#define NRF_TIMER0 ((NRF_TIMER_Type *) NRF_TIMER0_BASE)
+#define NRF_TIMER1 ((NRF_TIMER_Type *) NRF_TIMER1_BASE)
+#define NRF_TIMER2 ((NRF_TIMER_Type *) NRF_TIMER2_BASE)
+#define NRF_RTC0 ((NRF_RTC_Type *) NRF_RTC0_BASE)
+#define NRF_TEMP ((NRF_TEMP_Type *) NRF_TEMP_BASE)
+#define NRF_RNG ((NRF_RNG_Type *) NRF_RNG_BASE)
+#define NRF_ECB ((NRF_ECB_Type *) NRF_ECB_BASE)
+#define NRF_AAR ((NRF_AAR_Type *) NRF_AAR_BASE)
+#define NRF_CCM ((NRF_CCM_Type *) NRF_CCM_BASE)
+#define NRF_WDT ((NRF_WDT_Type *) NRF_WDT_BASE)
+#define NRF_RTC1 ((NRF_RTC_Type *) NRF_RTC1_BASE)
+#define NRF_QDEC ((NRF_QDEC_Type *) NRF_QDEC_BASE)
+#define NRF_LPCOMP ((NRF_LPCOMP_Type *) NRF_LPCOMP_BASE)
+#define NRF_SWI ((NRF_SWI_Type *) NRF_SWI_BASE)
+#define NRF_NVMC ((NRF_NVMC_Type *) NRF_NVMC_BASE)
+#define NRF_PPI ((NRF_PPI_Type *) NRF_PPI_BASE)
+#define NRF_FICR ((NRF_FICR_Type *) NRF_FICR_BASE)
+#define NRF_UICR ((NRF_UICR_Type *) NRF_UICR_BASE)
+#define NRF_GPIO ((NRF_GPIO_Type *) NRF_GPIO_BASE)
+
+
+/** @} */ /* End of group Device_Peripheral_Registers */
+/** @} */ /* End of group nrf51 */
+/** @} */ /* End of group Nordic Semiconductor */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* nrf51_H */
+
diff --git a/os/hal/ports/NRF51/NRF51822/platform.mk b/os/hal/ports/NRF51/NRF51822/platform.mk new file mode 100644 index 0000000..5e8588d --- /dev/null +++ b/os/hal/ports/NRF51/NRF51822/platform.mk @@ -0,0 +1,8 @@ +# List of all the NRF51x platform files. +PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ + ${CHIBIOS}/community/os/hal/ports/NRF51/NRF51822/hal_lld.c \ + ${CHIBIOS}/community/os/hal/ports/NRF51/NRF51822/pal_lld.c + +# Required include directories +PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \ + ${CHIBIOS}/community/os/hal/ports/NRF51/NRF51822 |