diff options
Diffstat (limited to 'testhal/MSP430X')
| -rw-r--r-- | testhal/MSP430X/EXP430FR5969/ADC/Makefile | 206 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR5969/ADC/chconf.h | 274 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR5969/ADC/halconf.h | 388 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR5969/ADC/main.c | 270 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR5969/ADC/mcuconf.h | 68 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR5969/ADC/msp_vectors.c | 286 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR5969/DMA/main.c | 74 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR5969/DMA/msp_vectors.c | 22 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR5969/SPI/msp_vectors.c | 24 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR6989/ADC/Makefile | 206 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR6989/ADC/chconf.h | 274 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR6989/ADC/halconf.h | 388 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR6989/ADC/main.c | 254 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR6989/ADC/mcuconf.h | 68 | ||||
| -rw-r--r-- | testhal/MSP430X/EXP430FR6989/ADC/msp_vectors.c | 286 |
15 files changed, 3034 insertions, 54 deletions
diff --git a/testhal/MSP430X/EXP430FR5969/ADC/Makefile b/testhal/MSP430X/EXP430FR5969/ADC/Makefile new file mode 100644 index 0000000..cf81f18 --- /dev/null +++ b/testhal/MSP430X/EXP430FR5969/ADC/Makefile @@ -0,0 +1,206 @@ +##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Optimization level, can be [0, 1, 2, 3, s].
+# 0 = turn off optimization. s = optimize for size.
+# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPTIMIZE = 0
+
+# Debugging format.
+DEBUG =
+#DEBUG = stabs
+
+# Memory/data model
+MODEL = small
+
+# Object files directory
+# To put object files in current directory, use a dot (.), do NOT make
+# this an empty or blank macro!
+OBJDIR = .
+
+# Compiler flag to set the C Standard level.
+# c89 = "ANSI" C
+# gnu89 = c89 plus GCC extensions
+# c99 = ISO C99 standard (not yet fully implemented)
+# gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=gnu11
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O$(OPTIMIZE) -g$(DEBUG)
+ USE_OPT += -funsigned-char -fshort-enums
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT =
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+ USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+ USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+ USE_LTO = no
+endif
+
+# Enable the selected hardware multiplier
+ifeq ($(USE_HWMULT),)
+ USE_HWMULT = f5series
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = yes
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+ USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the idle thread stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_IDLE_STACKSIZE),)
+ USE_IDLE_STACKSIZE = 0xC00
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = nil
+
+# Imported source files and paths
+CHIBIOS = ../../../../../ChibiOS-RT
+CHIBIOS_CONTRIB = ../../../..
+# Startup files.
+include $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC/mk/startup_msp430fr5xxx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS_CONTRIB)/os/hal/boards/EXP430FR5969/board.mk
+include $(CHIBIOS_CONTRIB)/os/hal/ports/MSP430X/platform.mk
+include $(CHIBIOS)/os/hal/osal/nil/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/nil/nil.mk
+include $(CHIBIOS_CONTRIB)/os/common/ports/MSP430X/compilers/GCC/mk/port.mk
+# Other files (optional).
+
+# Define linker script file here
+LDSCRIPT = $(STARTUPLD)/msp430fr5969.ld
+
+# C sources
+CSRC = $(STARTUPSRC) \
+ $(KERNSRC) \
+ $(PORTSRC) \
+ $(OSALSRC) \
+ $(HALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ $(TESTSRC) \
+ msp_vectors.c \
+ main.c
+
+# C++ sources
+CPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(CHIBIOS)/os/license \
+ $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+ $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+ $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU = msp430fr5969
+
+TRGT = msp430-elf-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+#LD = $(TRGT)g++
+CP = $(TRGT)objcopy
+AS = $(TRGT)gcc -x assembler-with-cpp
+AR = $(TRGT)ar
+OD = $(TRGT)objdump
+SZ = $(TRGT)size
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary
+
+# MSP430-specific options here
+MOPT = -m$(MODEL)
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/testhal/MSP430X/EXP430FR5969/ADC/chconf.h b/testhal/MSP430X/EXP430FR5969/ADC/chconf.h new file mode 100644 index 0000000..3b7a8e1 --- /dev/null +++ b/testhal/MSP430X/EXP430FR5969/ADC/chconf.h @@ -0,0 +1,274 @@ +/*
+ ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file nilconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_NIL_CONF_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Number of user threads in the application.
+ * @note This number is not inclusive of the idle thread which is
+ * Implicitly handled.
+ */
+#define CH_CFG_NUM_THREADS 1
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name System timer settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 16
+
+/**
+ * @brief System tick frequency.
+ * @note This value together with the @p CH_CFG_ST_RESOLUTION
+ * option defines the maximum amount of time allowed for
+ * timeouts.
+ */
+#define CH_CFG_ST_FREQUENCY 1000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note Feature not currently implemented.
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_MUTEXES FALSE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note Feature not currently implemented.
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+
+/**
+ * @brief Debug option, parameters checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS TRUE
+
+/**
+ * @brief System assertions.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS TRUE
+
+/**
+ * @brief Stack check.
+ *
+ *@note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System initialization hook.
+ */
+#if !defined(CH_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+}
+#endif
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXT_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ */
+#define CH_CFG_THREAD_EXT_INIT_HOOK(tr) { \
+ /* Add custom threads initialization code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+}
+
+/**
+ * @brief System halt hook.
+ */
+#if !defined(CH_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in nilcore.h). */
+/*===========================================================================*/
+
+#endif /* _CHCONF_H_ */
+
+/** @} */
diff --git a/testhal/MSP430X/EXP430FR5969/ADC/halconf.h b/testhal/MSP430X/EXP430FR5969/ADC/halconf.h new file mode 100644 index 0000000..2982a63 --- /dev/null +++ b/testhal/MSP430X/EXP430FR5969/ADC/halconf.h @@ -0,0 +1,388 @@ +/*
+ ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the DMA subsystem.
+ */
+#if !defined(HAL_USE_DMA) || defined(__DOXYGEN__)
+#define HAL_USE_DMA TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC TRUE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL TRUE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB FALSE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE FALSE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS FALSE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING FALSE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING FALSE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/testhal/MSP430X/EXP430FR5969/ADC/main.c b/testhal/MSP430X/EXP430FR5969/ADC/main.c new file mode 100644 index 0000000..8a530ec --- /dev/null +++ b/testhal/MSP430X/EXP430FR5969/ADC/main.c @@ -0,0 +1,270 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "string.h"
+#include "stdio.h" /* eesh */
+
+/* Disable watchdog because of lousy startup code in newlib */
+static void __attribute__((naked, section(".crt_0042disable_watchdog"), used))
+disable_watchdog(void) {
+ WDTCTL = WDTPW | WDTHOLD;
+}
+
+const char * start_msg = "\r\n\r\nExecuting ADC test suite...\r\n";
+const char * test_1_msg = "\r\nTEST 1: 1 channel, depth 1, no circular\r\n";
+const char * test_2_msg = "\r\nTEST 2: 1 channel, depth 8, no circular\r\n";
+const char * test_3_msg = "\r\nTEST 3: 4 channels, depth 1, no circular\r\n";
+const char * test_4_msg = "\r\nTEST 4: 4 channels, depth 8, no circular\r\n";
+const char * test_5_msg = "\r\nTEST 5: 1 channel, depth 1, circular\r\n";
+const char * test_6_msg = "\r\nTEST 6: 1 channel, depth 8, circular\r\n";
+const char * test_7_msg = "\r\nTEST 7: 4 channel, depth 1, circular\r\n";
+const char * test_8_msg = "\r\nTEST 8: 4 channel, depth 8, circular\r\n";
+const char * test_9_msg = "\r\nTEST 9: 1 channel, depth 1, synchronous\r\n";
+const char * test_10_msg = "\r\nTEST 9: 1 channel, depth 1, exclusive\r\n";
+
+const char * success_string = "\r\nSUCCESS\r\n";
+const char * fail_string = "\r\nFAILURE\r\n";
+
+char out_string[128];
+const char * raw_fmt_string = "Raw Value: %d\r\n";
+const char * cooked_fmt_string = "Cooked Value: %d\r\n";
+const char * chn_fmt_string = "\r\nCHANNEL %d\r\n";
+
+uint16_t buffer_margin[72];
+uint16_t * buffer = buffer_margin + 4;
+uint8_t depth;
+uint8_t cb_arg = 0;
+uint16_t cb_expect;
+
+static const int test = 0;
+
+ADCConfig config = {
+ 255 /* dma_index */
+};
+
+ADCConversionGroup group = {
+ false, /* circular */
+ 1, /* num_channels */
+ NULL, /* end_cb */
+ NULL, /* error_cb */
+ {
+ 30, 31, 30, 31, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0
+ }, /* channels */
+ MSP430X_ADC_RES_12BIT, /* res */
+ MSP430X_ADC_SHT_32, /* rate */
+ MSP430X_ADC_VSS_VREF_BUF, /* ref */
+ MSP430X_REF_2V5 /* vref_src */
+};
+
+void print(const char * msg) {
+
+ if (!test) {
+ chnWrite(&SD0, (const uint8_t *)msg, strlen(msg));
+ }
+}
+
+void adc_callback(ADCDriver * adcp, adcsample_t *buffer, size_t n) {
+ (void)adcp;
+ (void)buffer;
+ (void)n;
+
+ cb_arg++;
+
+ if (adcp->grpp->circular && cb_arg == cb_expect) {
+ osalSysLockFromISR();
+ adcStopConversionI(adcp);
+ osalSysUnlockFromISR();
+ }
+}
+
+void run_test(const char * test_msg, uint8_t num_channels, uint8_t depth,
+ bool circular) {
+ print(test_msg);
+
+ cb_arg = 0;
+
+ group.num_channels = num_channels;
+ group.circular = circular;
+ group.end_cb = adc_callback;
+
+ if (depth > 1) cb_expect = 2;
+ else cb_expect = 1;
+ if (circular) cb_expect *= 3;
+
+ adcStartConversion(&ADCD1, &group, buffer, depth);
+
+ while (ADCD1.state == ADC_ACTIVE) ;
+
+
+ int index = 0;
+ for (int j = 0; j < depth; j++) {
+ for (int i = 0; i < group.num_channels; i++) {
+ index = i + (j * group.num_channels);
+ sniprintf(out_string, 128, chn_fmt_string, group.channels[i]);
+ print(out_string);
+
+ sniprintf(out_string, 128, raw_fmt_string, buffer[index]);
+ print(out_string);
+
+ if (group.channels[i] == 30) { /* internal temp sensor */
+ buffer[index] = adcMSP430XAdjustTemp(&group, buffer[index]);
+ }
+ else {
+ buffer[index] = adcMSP430XAdjustResult(&group, buffer[index]);
+ }
+
+ sniprintf(out_string, 128, cooked_fmt_string, buffer[index]);
+ print(out_string);
+ }
+ }
+
+ if (cb_arg == cb_expect) {
+ print(success_string);
+ }
+ else {
+ print(fail_string);
+ }
+}
+
+/*
+ * Thread 2.
+ */
+THD_WORKING_AREA(waThread1, 4096);
+THD_FUNCTION(Thread1, arg) {
+
+ (void)arg;
+
+ /*
+ * Activate the serial driver 0 using the driver default configuration.
+ */
+ sdStart(&SD0, NULL);
+
+
+ while (chnGetTimeout(&SD0, TIME_INFINITE)) {
+ print(start_msg);
+ chThdSleepMilliseconds(2000);
+
+ /* Activate the ADC driver 1 using its config */
+ adcStart(&ADCD1, &config);
+
+ /* Test 1 - 1ch1d, no circular */
+ run_test(test_1_msg, 1, 1, false);
+
+ /* Test 2 - 1ch8d, no circular */
+ run_test(test_2_msg, 1, 8, false);
+
+ /* Test 3 - 4chd1, no circular */
+ run_test(test_3_msg, 4, 1, false);
+
+ /* Test 4 - 4ch8d, no circular */
+ run_test(test_4_msg, 4, 8, false);
+
+ /* Test 5 - 1ch1d, circular */
+ run_test(test_5_msg, 1, 1, true);
+
+ /* Test 6 - 1ch8d, circular */
+ run_test(test_6_msg, 1, 8, true);
+
+ /* Test 7 - 4ch1d, circular */
+ run_test(test_7_msg, 4, 1, true);
+
+ /* Test 8 - 4ch8d, circular */
+ run_test(test_8_msg, 4, 8, true);
+
+ /* Test 9 - 1ch1d, synchronous */
+ print(test_9_msg);
+ cb_arg = 0;
+
+ group.num_channels = 1;
+ group.circular = false;
+ group.end_cb = adc_callback;
+
+ cb_expect = 1;
+
+ adcConvert(&ADCD1, &group, buffer, 1);
+
+ while (ADCD1.state == ADC_ACTIVE) ;
+
+ sniprintf(out_string, 128, chn_fmt_string, group.channels[0]);
+ print(out_string);
+
+ sniprintf(out_string, 128, raw_fmt_string, buffer[0]);
+ print(out_string);
+
+ buffer[0] = adcMSP430XAdjustTemp(&group, buffer[0]);
+
+ sniprintf(out_string, 128, cooked_fmt_string, buffer[0]);
+ print(out_string);
+
+ if (cb_arg == cb_expect) {
+ print(success_string);
+ }
+ else {
+ print(fail_string);
+ }
+
+ /* Test 10 - 1ch1d, exclusive */
+ adcStop(&ADCD1);
+
+ config.dma_index = 0;
+
+ adcStart(&ADCD1, &config);
+
+ run_test(test_10_msg, 1, 1, false);
+
+ adcStop(&ADCD1);
+
+ config.dma_index = 255;
+ }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+ THD_TABLE_ENTRY(waThread1, "adc_test", Thread1, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+ WDTCTL = WDTPW | WDTHOLD;
+
+ halInit();
+ chSysInit();
+
+ /* This is now the idle thread loop, you may perform here a low priority
+ task but you must never try to sleep or wait in this loop. Note that
+ this tasks runs at the lowest priority level so any instruction added
+ here will be executed after all other tasks have been started.*/
+ while (true) {
+ }
+}
diff --git a/testhal/MSP430X/EXP430FR5969/ADC/mcuconf.h b/testhal/MSP430X/EXP430FR5969/ADC/mcuconf.h new file mode 100644 index 0000000..70e29ff --- /dev/null +++ b/testhal/MSP430X/EXP430FR5969/ADC/mcuconf.h @@ -0,0 +1,68 @@ +/*
+ ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * MSP430X drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the driver
+ * is enabled in halconf.h.
+ *
+ */
+
+#define MSP430X_MCUCONF
+
+/* HAL driver system settings */
+#define MSP430X_ACLK_SRC MSP430X_VLOCLK
+#define MSP430X_LFXTCLK_FREQ 0
+#define MSP430X_HFXTCLK_FREQ 0
+#define MSP430X_DCOCLK_FREQ 8000000
+#define MSP430X_MCLK_DIV 1
+#define MSP430X_SMCLK_DIV 32
+
+/*
+ * SERIAL driver system settings.
+ */
+#define MSP430X_SERIAL_USE_USART0 TRUE
+#define MSP430X_USART0_CLK_SRC MSP430X_SMCLK_SRC
+#define MSP430X_SERIAL_USE_USART1 FALSE
+#define MSP430X_SERIAL_USE_USART2 FALSE
+#define MSP430X_SERIAL_USE_USART3 FALSE
+
+/*
+ * ST driver system settings.
+ */
+#define MSP430X_ST_CLK_SRC MSP430X_SMCLK_SRC
+#define MSP430X_ST_TIMER_TYPE B
+#define MSP430X_ST_TIMER_INDEX 0
+
+/*
+ * SPI driver system settings.
+ */
+#define MSP430X_SPI_USE_SPIA1 FALSE
+#define MSP430X_SPI_USE_SPIB0 FALSE
+#define MSP430X_SPI_EXCLUSIVE_DMA TRUE
+
+/*
+ * ADC driver system settings
+ */
+#define MSP430X_ADC_EXCLUSIVE_DMA TRUE
+#define MSP430X_ADC1_FREQ 5000000 / 256
+
+#endif /* _MCUCONF_H_ */
diff --git a/testhal/MSP430X/EXP430FR5969/ADC/msp_vectors.c b/testhal/MSP430X/EXP430FR5969/ADC/msp_vectors.c new file mode 100644 index 0000000..d12ed53 --- /dev/null +++ b/testhal/MSP430X/EXP430FR5969/ADC/msp_vectors.c @@ -0,0 +1,286 @@ +#include <msp430.h>
+
+__attribute__((interrupt(1)))
+void Vector1(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(2)))
+void Vector2(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(3)))
+void Vector3(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(4)))
+void Vector4(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(5)))
+void Vector5(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(6)))
+void Vector6(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(7)))
+void Vector7(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(8)))
+void Vector8(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(9)))
+void Vector9(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(10)))
+void Vector10(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(11)))
+void Vector11(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(12)))
+void Vector12(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(13)))
+void Vector13(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(14)))
+void Vector14(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(15)))
+void Vector15(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(16)))
+void Vector16(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(17)))
+void Vector17(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(18)))
+void Vector18(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(19)))
+void Vector19(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(20)))
+void Vector20(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(21)))
+void Vector21(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(22)))
+void Vector22(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(23)))
+void Vector23(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(24)))
+void Vector24(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(25)))
+void Vector25(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(26)))
+void Vector26(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(27)))
+void Vector27(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(28)))
+void Vector28(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(29)))
+void Vector29(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(30)))
+void Vector30(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(31)))
+void Vector31(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(32)))
+void Vector32(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(35)))
+void Vector35(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(36)))
+void Vector36(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(38)))
+void Vector38(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(39)))
+void Vector39(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(41)))
+void Vector41(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(42)))
+void Vector42(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(44)))
+void Vector44(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(45)))
+void Vector45(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(46)))
+void Vector46(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(48)))
+void Vector48(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(50)))
+void Vector50(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(51)))
+void Vector51(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(53)))
+void Vector53(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(54)))
+void Vector54(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(55)))
+void Vector55(void) {
+
+ while (1) {
+ }
+}
+
+
diff --git a/testhal/MSP430X/EXP430FR5969/DMA/main.c b/testhal/MSP430X/EXP430FR5969/DMA/main.c index 1929af1..757eedc 100644 --- a/testhal/MSP430X/EXP430FR5969/DMA/main.c +++ b/testhal/MSP430X/EXP430FR5969/DMA/main.c @@ -35,6 +35,8 @@ const char * test_6_msg = "TEST 6: Attempt to claim already claimed DMA " "and succeed.\r\n";
const char * test_7_msg = "TEST 7: Claim DMA channel 1, perform a Word-to-word "
"memcpy, and release it\r\n";
+const char * test_8_msg = "TEST 8: Claim all three DMA channels, try to issue dmaRequest, "
+ "fail\r\n";
const char * succeed_string = "SUCCESS\r\n\r\n";
const char * fail_string = "FAILURE\r\n\r\n";
@@ -43,6 +45,8 @@ char instring[256]; char outstring[256];
msp430x_dma_req_t * request;
uint8_t cb_arg = 1;
+bool result;
+int result_i;
void dma_callback_test(void * args) {
@@ -120,6 +124,8 @@ msp430x_dma_req_t test_5_req = { };
msp430x_dma_ch_t ch = { NULL, 0, NULL };
+msp430x_dma_ch_t ch1 = { NULL, 0, NULL };
+msp430x_dma_ch_t ch2 = { NULL, 0, NULL };
/*
* Thread 2.
@@ -146,7 +152,9 @@ THD_FUNCTION(Thread1, arg) { chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
}
request = &test_1_req;
- dmaRequest(request, TIME_INFINITE);
+ chSysLock();
+ dmaRequestS(request, TIME_INFINITE);
+ chSysUnlock();
if (strcmp("After DMA test \r\n", outstring)) {
chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
}
@@ -162,7 +170,9 @@ THD_FUNCTION(Thread1, arg) { chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
}
request = &test_2_req;
- dmaRequest(request, TIME_INFINITE);
+ chSysLock();
+ dmaRequestS(request, TIME_INFINITE);
+ chSysUnlock();
if (strcmp("After DMA test \r\n", outstring)) {
chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
}
@@ -178,7 +188,9 @@ THD_FUNCTION(Thread1, arg) { chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
}
request = &test_3_req;
- dmaRequest(request, TIME_INFINITE);
+ chSysLock();
+ dmaRequestS(request, TIME_INFINITE);
+ chSysUnlock();
if (strcmp("AAAAAAAAAAAAAAAA\r\n", outstring)) {
chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
}
@@ -196,7 +208,9 @@ THD_FUNCTION(Thread1, arg) { chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
}
request = &test_4_req;
- dmaRequest(request, TIME_INFINITE);
+ chSysLock();
+ dmaRequestS(request, TIME_INFINITE);
+ chSysUnlock();
if (strcmp("After DMA test \r\n", outstring) || cb_arg) {
chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
}
@@ -213,7 +227,9 @@ THD_FUNCTION(Thread1, arg) { chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
}
request = &test_5_req;
- dmaAcquire(&ch, 0);
+ chSysLock();
+ dmaAcquireI(&ch, 0);
+ chSysUnlock();
dmaTransfer(&ch, request);
if (strcmp("After DMA test \r\n", outstring)) {
chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
@@ -225,11 +241,17 @@ THD_FUNCTION(Thread1, arg) { /* Test 6 - Attempt to claim DMA channel 0, fail, release it, attempt to
* claim it again */
chnWrite(&SD0, (const uint8_t *)test_6_msg, strlen(test_6_msg));
- if (!dmaAcquire(&ch, 0)) {
+ chSysLock();
+ result = dmaAcquireI(&ch, 0);
+ chSysUnlock();
+ if (!result) {
chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
}
dmaRelease(&ch);
- if (dmaAcquire(&ch, 0)) {
+ chSysLock();
+ result = dmaAcquireI(&ch, 0);
+ chSysUnlock();
+ if (result) {
chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
}
else {
@@ -246,7 +268,9 @@ THD_FUNCTION(Thread1, arg) { chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
}
request = &test_5_req;
- dmaAcquire(&ch, 1);
+ chSysLock();
+ dmaAcquireI(&ch, 1);
+ chSysUnlock();
dmaTransfer(&ch, request);
if (strcmp("After DMA test \r\n", outstring)) {
chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
@@ -255,6 +279,40 @@ THD_FUNCTION(Thread1, arg) { chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
}
dmaRelease(&ch);
+
+ /* Test 8 - Claim all 3 DMA channels, attempt dmaRequest, fail */
+ chnWrite(&SD0, (const uint8_t *)test_8_msg, strlen(test_8_msg));
+ chSysLock();
+ result = dmaAcquireI(&ch, 0);
+ chSysUnlock();
+ if (result) {
+ chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
+ }
+ chSysLock();
+ result = dmaAcquireI(&ch1, 1);
+ chSysUnlock();
+ if (result) {
+ chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
+ }
+ chSysLock();
+ result = dmaAcquireI(&ch2, 2);
+ chSysUnlock();
+ if (result) {
+ chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
+ }
+ chSysLock();
+ result_i = dmaRequestS(request, TIME_IMMEDIATE);
+ chSysUnlock();
+ if (result_i > 0) {
+ chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
+ }
+ else {
+ chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
+ }
+ dmaRelease(&ch);
+ dmaRelease(&ch1);
+ dmaRelease(&ch2);
+
}
}
diff --git a/testhal/MSP430X/EXP430FR5969/DMA/msp_vectors.c b/testhal/MSP430X/EXP430FR5969/DMA/msp_vectors.c index 8968fb9..f5ad4b6 100644 --- a/testhal/MSP430X/EXP430FR5969/DMA/msp_vectors.c +++ b/testhal/MSP430X/EXP430FR5969/DMA/msp_vectors.c @@ -192,18 +192,6 @@ void Vector32(void) { while (1) {
}
}
-__attribute__((interrupt(33)))
-void Vector33(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(34)))
-void Vector34(void) {
-
- while (1) {
- }
-}
__attribute__((interrupt(35)))
void Vector35(void) {
@@ -216,12 +204,7 @@ void Vector36(void) { while (1) {
}
}
-__attribute__((interrupt(37)))
-void Vector37(void) {
- while (1) {
- }
-}
__attribute__((interrupt(38)))
void Vector38(void) {
@@ -234,12 +217,7 @@ void Vector39(void) { while (1) {
}
}
-__attribute__((interrupt(40)))
-void Vector40(void) {
- while (1) {
- }
-}
__attribute__((interrupt(41)))
void Vector41(void) {
diff --git a/testhal/MSP430X/EXP430FR5969/SPI/msp_vectors.c b/testhal/MSP430X/EXP430FR5969/SPI/msp_vectors.c index 8968fb9..c23cbc8 100644 --- a/testhal/MSP430X/EXP430FR5969/SPI/msp_vectors.c +++ b/testhal/MSP430X/EXP430FR5969/SPI/msp_vectors.c @@ -192,18 +192,6 @@ void Vector32(void) { while (1) {
}
}
-__attribute__((interrupt(33)))
-void Vector33(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(34)))
-void Vector34(void) {
-
- while (1) {
- }
-}
__attribute__((interrupt(35)))
void Vector35(void) {
@@ -216,12 +204,6 @@ void Vector36(void) { while (1) {
}
}
-__attribute__((interrupt(37)))
-void Vector37(void) {
-
- while (1) {
- }
-}
__attribute__((interrupt(38)))
void Vector38(void) {
@@ -234,12 +216,6 @@ void Vector39(void) { while (1) {
}
}
-__attribute__((interrupt(40)))
-void Vector40(void) {
-
- while (1) {
- }
-}
__attribute__((interrupt(41)))
void Vector41(void) {
diff --git a/testhal/MSP430X/EXP430FR6989/ADC/Makefile b/testhal/MSP430X/EXP430FR6989/ADC/Makefile new file mode 100644 index 0000000..b86021e --- /dev/null +++ b/testhal/MSP430X/EXP430FR6989/ADC/Makefile @@ -0,0 +1,206 @@ +##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Optimization level, can be [0, 1, 2, 3, s].
+# 0 = turn off optimization. s = optimize for size.
+# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPTIMIZE = 0
+
+# Debugging format.
+DEBUG =
+#DEBUG = stabs
+
+# Memory/data model
+MODEL = small
+
+# Object files directory
+# To put object files in current directory, use a dot (.), do NOT make
+# this an empty or blank macro!
+OBJDIR = .
+
+# Compiler flag to set the C Standard level.
+# c89 = "ANSI" C
+# gnu89 = c89 plus GCC extensions
+# c99 = ISO C99 standard (not yet fully implemented)
+# gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=gnu11
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O$(OPTIMIZE) -g$(DEBUG)
+ USE_OPT += -funsigned-char -fshort-enums
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT =
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+ USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+ USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+ USE_LTO = no
+endif
+
+# Enable the selected hardware multiplier
+ifeq ($(USE_HWMULT),)
+ USE_HWMULT = f5series
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = yes
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+ USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the idle thread stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_IDLE_STACKSIZE),)
+ USE_IDLE_STACKSIZE = 0xC00
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = nil
+
+# Imported source files and paths
+CHIBIOS = ../../../../../ChibiOS-RT
+CHIBIOS_CONTRIB = ../../../..
+# Startup files.
+include $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC/mk/startup_msp430fr5xxx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS_CONTRIB)/os/hal/boards/EXP430FR6989/board.mk
+include $(CHIBIOS_CONTRIB)/os/hal/ports/MSP430X/platform.mk
+include $(CHIBIOS)/os/hal/osal/nil/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/nil/nil.mk
+include $(CHIBIOS_CONTRIB)/os/common/ports/MSP430X/compilers/GCC/mk/port.mk
+# Other files (optional).
+
+# Define linker script file here
+LDSCRIPT = $(STARTUPLD)/msp430fr6989.ld
+
+# C sources
+CSRC = $(STARTUPSRC) \
+ $(KERNSRC) \
+ $(PORTSRC) \
+ $(OSALSRC) \
+ $(HALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ $(TESTSRC) \
+ msp_vectors.c \
+ main.c
+
+# C++ sources
+CPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(CHIBIOS)/os/license \
+ $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+ $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+ $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU = msp430fr6989
+
+TRGT = msp430-elf-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+#LD = $(TRGT)g++
+CP = $(TRGT)objcopy
+AS = $(TRGT)gcc -x assembler-with-cpp
+AR = $(TRGT)ar
+OD = $(TRGT)objdump
+SZ = $(TRGT)size
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary
+
+# MSP430-specific options here
+MOPT = -m$(MODEL)
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/testhal/MSP430X/EXP430FR6989/ADC/chconf.h b/testhal/MSP430X/EXP430FR6989/ADC/chconf.h new file mode 100644 index 0000000..3b7a8e1 --- /dev/null +++ b/testhal/MSP430X/EXP430FR6989/ADC/chconf.h @@ -0,0 +1,274 @@ +/*
+ ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file nilconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_NIL_CONF_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Number of user threads in the application.
+ * @note This number is not inclusive of the idle thread which is
+ * Implicitly handled.
+ */
+#define CH_CFG_NUM_THREADS 1
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name System timer settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 16
+
+/**
+ * @brief System tick frequency.
+ * @note This value together with the @p CH_CFG_ST_RESOLUTION
+ * option defines the maximum amount of time allowed for
+ * timeouts.
+ */
+#define CH_CFG_ST_FREQUENCY 1000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note Feature not currently implemented.
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_MUTEXES FALSE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note Feature not currently implemented.
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+
+/**
+ * @brief Debug option, parameters checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS TRUE
+
+/**
+ * @brief System assertions.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS TRUE
+
+/**
+ * @brief Stack check.
+ *
+ *@note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System initialization hook.
+ */
+#if !defined(CH_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+}
+#endif
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXT_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ */
+#define CH_CFG_THREAD_EXT_INIT_HOOK(tr) { \
+ /* Add custom threads initialization code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+}
+
+/**
+ * @brief System halt hook.
+ */
+#if !defined(CH_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in nilcore.h). */
+/*===========================================================================*/
+
+#endif /* _CHCONF_H_ */
+
+/** @} */
diff --git a/testhal/MSP430X/EXP430FR6989/ADC/halconf.h b/testhal/MSP430X/EXP430FR6989/ADC/halconf.h new file mode 100644 index 0000000..2982a63 --- /dev/null +++ b/testhal/MSP430X/EXP430FR6989/ADC/halconf.h @@ -0,0 +1,388 @@ +/*
+ ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the DMA subsystem.
+ */
+#if !defined(HAL_USE_DMA) || defined(__DOXYGEN__)
+#define HAL_USE_DMA TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC TRUE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT FALSE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL TRUE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB FALSE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE FALSE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS FALSE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING FALSE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING FALSE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/testhal/MSP430X/EXP430FR6989/ADC/main.c b/testhal/MSP430X/EXP430FR6989/ADC/main.c new file mode 100644 index 0000000..06f9a9c --- /dev/null +++ b/testhal/MSP430X/EXP430FR6989/ADC/main.c @@ -0,0 +1,254 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "string.h"
+#include "stdio.h" /* eesh */
+
+/* Disable watchdog because of lousy startup code in newlib */
+static void __attribute__((naked, section(".crt_0042disable_watchdog"), used))
+disable_watchdog(void) {
+ WDTCTL = WDTPW | WDTHOLD;
+}
+
+const char * start_msg = "\r\n\r\nExecuting ADC test suite...\r\n";
+const char * test_1_msg = "\r\nTEST 1: 1 channel, depth 1, no circular\r\n";
+const char * test_2_msg = "\r\nTEST 2: 1 channel, depth 8, no circular\r\n";
+const char * test_3_msg = "\r\nTEST 3: 4 channels, depth 1, no circular\r\n";
+const char * test_4_msg = "\r\nTEST 4: 4 channels, depth 8, no circular\r\n";
+const char * test_5_msg = "\r\nTEST 5: 1 channel, depth 1, circular\r\n";
+const char * test_6_msg = "\r\nTEST 6: 1 channel, depth 8, circular\r\n";
+const char * test_7_msg = "\r\nTEST 7: 4 channel, depth 1, circular\r\n";
+const char * test_8_msg = "\r\nTEST 8: 4 channel, depth 8, circular\r\n";
+const char * test_9_msg = "\r\nTEST 9: 1 channel, depth 1, synchronous\r\n";
+
+const char * success_string = "\r\nSUCCESS\r\n";
+const char * fail_string = "\r\nFAILURE\r\n";
+
+char out_string[128];
+const char * raw_fmt_string = "Raw Value: %d\r\n";
+const char * cooked_fmt_string = "Cooked Value: %d\r\n";
+const char * chn_fmt_string = "\r\nCHANNEL %d\r\n";
+
+uint16_t buffer_margin[72];
+uint16_t * buffer = buffer_margin + 4;
+uint8_t depth;
+uint8_t cb_arg = 0;
+uint16_t cb_expect;
+
+static const int test = 0;
+
+ADCConfig config = {
+};
+
+ADCConversionGroup group = {
+ false, /* circular */
+ 1, /* num_channels */
+ NULL, /* end_cb */
+ NULL, /* error_cb */
+ {
+ 30, 31, 30, 31, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0
+ }, /* channels */
+ MSP430X_ADC_RES_12BIT, /* res */
+ MSP430X_ADC_SHT_32, /* rate */
+ MSP430X_ADC_VSS_VREF_BUF, /* ref */
+ MSP430X_REF_2V5 /* vref_src */
+};
+
+void print(const char * msg) {
+
+ if (!test) {
+ chnWrite(&SD1, (const uint8_t *)msg, strlen(msg));
+ }
+}
+
+void adc_callback(ADCDriver * adcp, adcsample_t *buffer, size_t n) {
+ (void)adcp;
+ (void)buffer;
+ (void)n;
+
+ cb_arg++;
+
+ if (adcp->grpp->circular && cb_arg == cb_expect) {
+ osalSysLockFromISR();
+ adcStopConversionI(adcp);
+ osalSysUnlockFromISR();
+ }
+}
+
+void run_test(const char * test_msg, uint8_t num_channels, uint8_t depth,
+ bool circular) {
+ print(test_msg);
+
+ cb_arg = 0;
+
+ group.num_channels = num_channels;
+ group.circular = circular;
+ group.end_cb = adc_callback;
+
+ if (depth > 1) cb_expect = 2;
+ else cb_expect = 1;
+ if (circular) cb_expect *= 3;
+
+ adcStartConversion(&ADCD1, &group, buffer, depth);
+
+ while (ADCD1.state == ADC_ACTIVE) ;
+
+
+ int index = 0;
+ for (int j = 0; j < depth; j++) {
+ for (int i = 0; i < group.num_channels; i++) {
+ index = i + (j * group.num_channels);
+ sniprintf(out_string, 128, chn_fmt_string, group.channels[i]);
+ print(out_string);
+
+ sniprintf(out_string, 128, raw_fmt_string, buffer[index]);
+ print(out_string);
+
+ if (group.channels[i] == 30) { /* internal temp sensor */
+ buffer[index] = adcMSP430XAdjustTemp(&group, buffer[index]);
+ }
+ else {
+ buffer[index] = adcMSP430XAdjustResult(&group, buffer[index]);
+ }
+
+ sniprintf(out_string, 128, cooked_fmt_string, buffer[index]);
+ print(out_string);
+ }
+ }
+
+ if (cb_arg == cb_expect) {
+ print(success_string);
+ }
+ else {
+ print(fail_string);
+ }
+}
+
+/*
+ * Thread 2.
+ */
+THD_WORKING_AREA(waThread1, 4096);
+THD_FUNCTION(Thread1, arg) {
+
+ (void)arg;
+
+ /*
+ * Activate the serial driver 0 using the driver default configuration.
+ */
+ sdStart(&SD1, NULL);
+
+ /* Activate the ADC driver 1 using its config */
+ adcStart(&ADCD1, &config);
+
+ while (chnGetTimeout(&SD1, TIME_INFINITE)) {
+ print(start_msg);
+ chThdSleepMilliseconds(2000);
+
+ /* Test 1 - 1ch1d, no circular */
+ run_test(test_1_msg, 1, 1, false);
+
+ /* Test 2 - 1ch8d, no circular */
+ run_test(test_2_msg, 1, 8, false);
+
+ /* Test 3 - 4chd1, no circular */
+ run_test(test_3_msg, 4, 1, false);
+
+ /* Test 4 - 4ch8d, no circular */
+ run_test(test_4_msg, 4, 8, false);
+
+ /* Test 5 - 1ch1d, circular */
+ run_test(test_5_msg, 1, 1, true);
+
+ /* Test 6 - 1ch8d, circular */
+ run_test(test_6_msg, 1, 8, true);
+
+ /* Test 7 - 4ch1d, circular */
+ run_test(test_7_msg, 4, 1, true);
+
+ /* Test 8 - 4ch8d, circular */
+ run_test(test_8_msg, 4, 8, true);
+
+ /* Test 9 - 1ch1d, synchronous */
+ print(test_9_msg);
+ cb_arg = 0;
+
+ group.num_channels = 1;
+ group.circular = false;
+ group.end_cb = adc_callback;
+
+ cb_expect = 1;
+
+ adcConvert(&ADCD1, &group, buffer, 1);
+
+ while (ADCD1.state == ADC_ACTIVE) ;
+
+ sniprintf(out_string, 128, chn_fmt_string, group.channels[0]);
+ print(out_string);
+
+ sniprintf(out_string, 128, raw_fmt_string, buffer[0]);
+ print(out_string);
+
+ buffer[0] = adcMSP430XAdjustTemp(&group, buffer[0]);
+
+ sniprintf(out_string, 128, cooked_fmt_string, buffer[0]);
+ print(out_string);
+
+ if (cb_arg == cb_expect) {
+ print(success_string);
+ }
+ else {
+ print(fail_string);
+ }
+ }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+ THD_TABLE_ENTRY(waThread1, "adc_test", Thread1, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+ WDTCTL = WDTPW | WDTHOLD;
+
+ halInit();
+ chSysInit();
+
+ /* This is now the idle thread loop, you may perform here a low priority
+ task but you must never try to sleep or wait in this loop. Note that
+ this tasks runs at the lowest priority level so any instruction added
+ here will be executed after all other tasks have been started.*/
+ while (true) {
+ }
+}
diff --git a/testhal/MSP430X/EXP430FR6989/ADC/mcuconf.h b/testhal/MSP430X/EXP430FR6989/ADC/mcuconf.h new file mode 100644 index 0000000..bcb0c69 --- /dev/null +++ b/testhal/MSP430X/EXP430FR6989/ADC/mcuconf.h @@ -0,0 +1,68 @@ +/*
+ ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * MSP430X drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the driver
+ * is enabled in halconf.h.
+ *
+ */
+
+#define MSP430X_MCUCONF
+
+/* HAL driver system settings */
+#define MSP430X_ACLK_SRC MSP430X_VLOCLK
+#define MSP430X_LFXTCLK_FREQ 0
+#define MSP430X_HFXTCLK_FREQ 0
+#define MSP430X_DCOCLK_FREQ 8000000
+#define MSP430X_MCLK_DIV 1
+#define MSP430X_SMCLK_DIV 32
+
+/*
+ * SERIAL driver system settings.
+ */
+#define MSP430X_SERIAL_USE_USART1 TRUE
+#define MSP430X_USART1_CLK_SRC MSP430X_SMCLK_SRC
+#define MSP430X_SERIAL_USE_USART0 FALSE
+#define MSP430X_SERIAL_USE_USART2 FALSE
+#define MSP430X_SERIAL_USE_USART3 FALSE
+
+/*
+ * ST driver system settings.
+ */
+#define MSP430X_ST_CLK_SRC MSP430X_SMCLK_SRC
+#define MSP430X_ST_TIMER_TYPE B
+#define MSP430X_ST_TIMER_INDEX 0
+
+/*
+ * SPI driver system settings.
+ */
+#define MSP430X_SPI_USE_SPIA1 FALSE
+#define MSP430X_SPI_USE_SPIB0 FALSE
+#define MSP430X_SPI_EXCLUSIVE_DMA FALSE
+
+/*
+ * ADC driver system settings
+ */
+#define MSP430X_ADC_EXCLUSIVE_DMA FALSE
+#define MSP430X_ADC1_FREQ 5000000 / 256
+
+#endif /* _MCUCONF_H_ */
diff --git a/testhal/MSP430X/EXP430FR6989/ADC/msp_vectors.c b/testhal/MSP430X/EXP430FR6989/ADC/msp_vectors.c new file mode 100644 index 0000000..24e2a11 --- /dev/null +++ b/testhal/MSP430X/EXP430FR6989/ADC/msp_vectors.c @@ -0,0 +1,286 @@ +#include <msp430.h>
+
+__attribute__((interrupt(1)))
+void Vector1(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(2)))
+void Vector2(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(3)))
+void Vector3(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(4)))
+void Vector4(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(5)))
+void Vector5(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(6)))
+void Vector6(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(7)))
+void Vector7(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(8)))
+void Vector8(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(9)))
+void Vector9(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(10)))
+void Vector10(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(11)))
+void Vector11(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(12)))
+void Vector12(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(13)))
+void Vector13(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(14)))
+void Vector14(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(15)))
+void Vector15(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(16)))
+void Vector16(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(17)))
+void Vector17(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(18)))
+void Vector18(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(19)))
+void Vector19(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(20)))
+void Vector20(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(21)))
+void Vector21(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(22)))
+void Vector22(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(23)))
+void Vector23(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(24)))
+void Vector24(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(25)))
+void Vector25(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(26)))
+void Vector26(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(27)))
+void Vector27(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(28)))
+void Vector28(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(29)))
+void Vector29(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(30)))
+void Vector30(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(33)))
+void Vector33(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(34)))
+void Vector34(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(36)))
+void Vector36(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(37)))
+void Vector37(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(39)))
+void Vector39(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(40)))
+void Vector40(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(42)))
+void Vector42(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(44)))
+void Vector44(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(45)))
+void Vector45(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(47)))
+void Vector47(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(48)))
+void Vector48(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(49)))
+void Vector49(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(50)))
+void Vector50(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(51)))
+void Vector51(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(53)))
+void Vector53(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(54)))
+void Vector54(void) {
+
+ while (1) {
+ }
+}
+__attribute__((interrupt(55)))
+void Vector55(void) {
+
+ while (1) {
+ }
+}
+
+
|