diff options
Diffstat (limited to 'testhal/STM32/STM32F4xx/EICU')
| -rw-r--r-- | testhal/STM32/STM32F4xx/EICU/Makefile | 418 | ||||
| -rw-r--r-- | testhal/STM32/STM32F4xx/EICU/chconf.h | 91 | ||||
| -rw-r--r-- | testhal/STM32/STM32F4xx/EICU/halconf_community.h | 7 | ||||
| -rw-r--r-- | testhal/STM32/STM32F4xx/EICU/main.c | 8 |
4 files changed, 277 insertions, 247 deletions
diff --git a/testhal/STM32/STM32F4xx/EICU/Makefile b/testhal/STM32/STM32F4xx/EICU/Makefile index c6bdbaf..92ad11b 100644 --- a/testhal/STM32/STM32F4xx/EICU/Makefile +++ b/testhal/STM32/STM32F4xx/EICU/Makefile @@ -1,210 +1,210 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
- USE_LDOPT =
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
- USE_LTO = no
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the Cortex-M process stack. This stack is
-# the stack used by the main() thread.
-ifeq ($(USE_PROCESS_STACKSIZE),)
- USE_PROCESS_STACKSIZE = 0x400
-endif
-
-# Stack size to the allocated to the Cortex-M main/exceptions stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
- USE_EXCEPTIONS_STACKSIZE = 0x400
-endif
-
-# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
-ifeq ($(USE_FPU),)
- USE_FPU = no
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
+############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
-# Startup files.
-include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
-include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F4xx/platform.mk
-include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk
-include $(CHIBIOS)/os/hal/osal/rt/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/rt/rt.mk
-include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
-
-# Define linker script file here
-LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(TESTSRC) \
- main.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m4
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = ccache $(TRGT)gcc
-CPPC = ccache $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wstrict-prototypes -Wundef
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra -Wundef
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
-include $(RULESPATH)/rules.mk
-
+CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk +# HAL-OSAL files (optional). +include $(CHIBIOS_CONTRIB)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = ccache $(TRGT)gcc +CPPC = ccache $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes -Wundef + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk + diff --git a/testhal/STM32/STM32F4xx/EICU/chconf.h b/testhal/STM32/STM32F4xx/EICU/chconf.h index c8a8f19..c33aa31 100644 --- a/testhal/STM32/STM32F4xx/EICU/chconf.h +++ b/testhal/STM32/STM32F4xx/EICU/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006-2014 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -28,6 +28,8 @@ #ifndef _CHCONF_H_
#define _CHCONF_H_
+#define _CHIBIOS_RT_CONF_
+
/*===========================================================================*/
/**
* @name System timers settings
@@ -46,7 +48,7 @@ * @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
-#define CH_CFG_ST_FREQUENCY 100000
+#define CH_CFG_ST_FREQUENCY 10000
/**
* @brief Time delta constant for the tick-less mode.
@@ -99,7 +101,8 @@ * @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread. The application @p main()
* function becomes the idle thread and must implement an
- * infinite loop. */
+ * infinite loop.
+ */
#define CH_CFG_NO_IDLE_THREAD FALSE
/** @} */
@@ -137,7 +140,7 @@ *
* @note The default is @p TRUE.
*/
-#define CH_CFG_USE_TM false
+#define CH_CFG_USE_TM TRUE
/**
* @brief Threads registry APIs.
@@ -162,7 +165,7 @@ *
* @note The default is @p TRUE.
*/
-#define CH_CFG_USE_SEMAPHORES FALSE
+#define CH_CFG_USE_SEMAPHORES TRUE
/**
* @brief Semaphores queuing mode.
@@ -181,7 +184,7 @@ *
* @note The default is @p TRUE.
*/
-#define CH_CFG_USE_MUTEXES FALSE
+#define CH_CFG_USE_MUTEXES TRUE
/**
* @brief Enables recursive behavior on mutexes.
@@ -201,7 +204,7 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
-#define CH_CFG_USE_CONDVARS FALSE
+#define CH_CFG_USE_CONDVARS TRUE
/**
* @brief Conditional Variables APIs with timeout.
@@ -211,7 +214,7 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
-#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
/**
* @brief Events Flags APIs.
@@ -219,7 +222,7 @@ *
* @note The default is @p TRUE.
*/
-#define CH_CFG_USE_EVENTS FALSE
+#define CH_CFG_USE_EVENTS TRUE
/**
* @brief Events Flags APIs with timeout.
@@ -229,7 +232,7 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
-#define CH_CFG_USE_EVENTS_TIMEOUT FALSE
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
/**
* @brief Synchronous Messages APIs.
@@ -238,7 +241,7 @@ *
* @note The default is @p TRUE.
*/
-#define CH_CFG_USE_MESSAGES FALSE
+#define CH_CFG_USE_MESSAGES TRUE
/**
* @brief Synchronous Messages queuing mode.
@@ -259,15 +262,7 @@ * @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
-#define CH_CFG_USE_MAILBOXES FALSE
-
-/**
- * @brief I/O Queues APIs.
- * @details If enabled then the I/O queues APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_QUEUES FALSE
+#define CH_CFG_USE_MAILBOXES TRUE
/**
* @brief Core Memory Manager APIs.
@@ -276,7 +271,7 @@ *
* @note The default is @p TRUE.
*/
-#define CH_CFG_USE_MEMCORE FALSE
+#define CH_CFG_USE_MEMCORE TRUE
/**
* @brief Heap Allocator APIs.
@@ -288,7 +283,7 @@ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
-#define CH_CFG_USE_HEAP FALSE
+#define CH_CFG_USE_HEAP TRUE
/**
* @brief Memory Pools Allocator APIs.
@@ -297,7 +292,7 @@ *
* @note The default is @p TRUE.
*/
-#define CH_CFG_USE_MEMPOOLS FALSE
+#define CH_CFG_USE_MEMPOOLS TRUE
/**
* @brief Dynamic Threads APIs.
@@ -308,7 +303,7 @@ * @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
-#define CH_CFG_USE_DYNAMIC FALSE
+#define CH_CFG_USE_DYNAMIC TRUE
/** @} */
@@ -359,9 +354,16 @@ * @details If enabled then the context switch circular trace buffer is
* activated.
*
- * @note The default is @p FALSE.
+ * @note The default is @p CH_DBG_TRACE_MASK_NONE.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_NONE
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_NONE.
*/
-#define CH_DBG_ENABLE_TRACE FALSE
+#define CH_DBG_TRACE_BUFFER_SIZE 128
/**
* @brief Debug option, stack checks.
@@ -383,7 +385,7 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS TRUE
+#define CH_DBG_FILL_THREADS FALSE
/**
* @brief Debug option, threads profiling.
@@ -426,10 +428,6 @@ /**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
@@ -440,7 +438,21 @@ * @details This hook is invoked just before switching between threads.
*/
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* System halt code here.*/ \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
}
/**
@@ -449,7 +461,8 @@ * should be invoked from here.
* @note This macro can be used to activate a power saving mode.
*/
-#define CH_CFG_IDLE_ENTER_HOOK() { \
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
}
/**
@@ -458,7 +471,8 @@ * should be invoked from here.
* @note This macro can be used to deactivate a power saving mode.
*/
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
}
/**
@@ -487,6 +501,15 @@ /* System halt code here.*/ \
}
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
/** @} */
/*===========================================================================*/
diff --git a/testhal/STM32/STM32F4xx/EICU/halconf_community.h b/testhal/STM32/STM32F4xx/EICU/halconf_community.h index 47ee83f..e967c6a 100644 --- a/testhal/STM32/STM32F4xx/EICU/halconf_community.h +++ b/testhal/STM32/STM32F4xx/EICU/halconf_community.h @@ -59,6 +59,13 @@ #define HAL_USE_CRC FALSE
#endif
+/**
+ * @brief Enables the RNG subsystem.
+ */
+#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__)
+#define HAL_USE_RNG FALSE
+#endif
+
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
diff --git a/testhal/STM32/STM32F4xx/EICU/main.c b/testhal/STM32/STM32F4xx/EICU/main.c index 4b3d72c..90f8eb1 100644 --- a/testhal/STM32/STM32F4xx/EICU/main.c +++ b/testhal/STM32/STM32F4xx/EICU/main.c @@ -125,10 +125,10 @@ int main(void) { halInit();
chSysInit();
- palSetPadMode(GPIOB, GPIOB_PIN0, PAL_MODE_ALTERNATE(2) | PAL_STM32_PUDR_FLOATING);
- palSetPadMode(GPIOB, GPIOB_PIN1, PAL_MODE_ALTERNATE(2) | PAL_STM32_PUDR_FLOATING);
- palSetPadMode(GPIOB, GPIOB_PIN4, PAL_MODE_ALTERNATE(2) | PAL_STM32_PUDR_FLOATING);
- palSetPadMode(GPIOB, GPIOB_PIN5, PAL_MODE_ALTERNATE(2) | PAL_STM32_PUDR_FLOATING);
+ palSetPadMode(GPIOB, GPIOB_PIN0, PAL_MODE_ALTERNATE(2));
+ palSetPadMode(GPIOB, GPIOB_PIN1, PAL_MODE_ALTERNATE(2));
+ palSetPadMode(GPIOB, GPIOB_PIN4, PAL_MODE_ALTERNATE(2));
+ palSetPadMode(GPIOB, GPIOB_PIN5, PAL_MODE_ALTERNATE(2));
eicuStart(&EICUD3, &eicucfg);
eicuEnable(&EICUD3);
|