diff options
Diffstat (limited to 'testhal')
158 files changed, 20710 insertions, 10909 deletions
diff --git a/testhal/KINETIS/TEENSY3_x/ADC/main.c b/testhal/KINETIS/TEENSY3_x/ADC/main.c index 7a2dc3a..09c3921 100644 --- a/testhal/KINETIS/TEENSY3_x/ADC/main.c +++ b/testhal/KINETIS/TEENSY3_x/ADC/main.c @@ -68,11 +68,11 @@ static void adc_end_cb(ADCDriver *adcp, adcsample_t *buffer, size_t n) { chSysLockFromISR();
chVTResetI(&vt);
if (temp < 19000) {
- chVTSetI(&vt, MS2ST(10), ledoff, NULL);
+ chVTSetI(&vt, TIME_MS2I(10), ledoff, NULL);
} else if (temp > 28000) {
- chVTSetI(&vt, MS2ST(20), ledoff, NULL);
+ chVTSetI(&vt, TIME_MS2I(20), ledoff, NULL);
} else {
- chVTSetI(&vt, MS2ST(40), ledoff, NULL);
+ chVTSetI(&vt, TIME_MS2I(40), ledoff, NULL);
}
chSysUnlockFromISR();
}
diff --git a/testhal/KINETIS/TEENSY3_x/EXT/main.c b/testhal/KINETIS/TEENSY3_x/EXT/main.c index 3903897..f46d49c 100644 --- a/testhal/KINETIS/TEENSY3_x/EXT/main.c +++ b/testhal/KINETIS/TEENSY3_x/EXT/main.c @@ -31,7 +31,7 @@ static void extcb1(EXTDriver *extp, expchannel_t channel) { chSysLockFromISR();
chVTResetI(&vt);
/* LED set to OFF after 500mS.*/
- chVTSetI(&vt, MS2ST(500), ledoff, NULL);
+ chVTSetI(&vt, TIME_MS2I(500), ledoff, NULL);
chSysUnlockFromISR();
}
diff --git a/testhal/KINETIS/TEENSY3_x/SERIAL/main.c b/testhal/KINETIS/TEENSY3_x/SERIAL/main.c index 722a398..66b21e0 100644 --- a/testhal/KINETIS/TEENSY3_x/SERIAL/main.c +++ b/testhal/KINETIS/TEENSY3_x/SERIAL/main.c @@ -26,7 +26,7 @@ static THD_FUNCTION(thSerEcho, arg) while (!chThdShouldTerminateX())
{
- chEvtWaitOneTimeout(EVENT_MASK(1), MS2ST(10));
+ chEvtWaitOneTimeout(EVENT_MASK(1), TIME_MS2I(10));
flags = chEvtGetAndClearFlags(&elSerData);
if (flags & CHN_INPUT_AVAILABLE)
{
diff --git a/testhal/NRF51/NRF51822/EXT/main.c b/testhal/NRF51/NRF51822/EXT/main.c index 8d24d021..f24eb5d 100644 --- a/testhal/NRF51/NRF51822/EXT/main.c +++ b/testhal/NRF51/NRF51822/EXT/main.c @@ -52,7 +52,7 @@ static void extcb1(EXTDriver *extp, expchannel_t channel) if (!debouncing1 && (pad1 == PAL_LOW)) { debouncing1 = true; chSysLockFromISR(); - chVTSetI(&vt1, MS2ST(DEBOUNCE_TIME), led1toggle, NULL); + chVTSetI(&vt1, TIME_MS2I(DEBOUNCE_TIME), led1toggle, NULL); chSysUnlockFromISR(); } else if (debouncing1 && (pad1 == PAL_HIGH)) { chSysLockFromISR(); @@ -73,7 +73,7 @@ static void extcb2(EXTDriver *extp, expchannel_t channel) if (!debouncing2 && (pad2 == PAL_LOW)) { debouncing2 = true; chSysLockFromISR(); - chVTSetI(&vt2, MS2ST(DEBOUNCE_TIME), led2toggle, NULL); + chVTSetI(&vt2, TIME_MS2I(DEBOUNCE_TIME), led2toggle, NULL); chSysUnlockFromISR(); } else if (debouncing2 && (pad2 == PAL_HIGH)) { chSysLockFromISR(); diff --git a/testhal/NRF51/NRF51822/I2C/main.c b/testhal/NRF51/NRF51822/I2C/main.c index cd038b5..7523548 100644 --- a/testhal/NRF51/NRF51822/I2C/main.c +++ b/testhal/NRF51/NRF51822/I2C/main.c @@ -107,7 +107,7 @@ static THD_FUNCTION(PollFakeThread, arg) { i2cflags_t errors;
i2cAcquireBus(&I2CD1);
- status = i2cMasterReceiveTimeout(&I2CD1, I2C_FAKE_ADDR, rx_data, 2, MS2ST(4));
+ status = i2cMasterReceiveTimeout(&I2CD1, I2C_FAKE_ADDR, rx_data, 2, TIME_MS2I(4));
i2cReleaseBus(&I2CD1);
if (status == MSG_RESET){
diff --git a/testhal/STM32/STM32F0xx/crc/Makefile b/testhal/STM32/STM32F0xx/crc/Makefile index 24f660a..7dfc020 100644 --- a/testhal/STM32/STM32F0xx/crc/Makefile +++ b/testhal/STM32/STM32F0xx/crc/Makefile @@ -1,214 +1,216 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
- USE_LDOPT =
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
- USE_LTO = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-# If enabled, this option makes the build process faster by not compiling
-# modules not used in the current configuration.
-ifeq ($(USE_SMART_BUILD),)
- USE_SMART_BUILD = yes
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the Cortex-M process stack. This stack is
-# the stack used by the main() thread.
-ifeq ($(USE_PROCESS_STACKSIZE),)
- USE_PROCESS_STACKSIZE = 0x200
-endif
-
-# Stack size to the allocated to the Cortex-M main/exceptions stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
- USE_EXCEPTIONS_STACKSIZE = 0x400
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
+############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
-# Startup files.
-include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
-include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F0xx/platform.mk
-include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk
-include $(CHIBIOS)/os/hal/osal/rt/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/rt/rt.mk
-include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
-
-# Define linker script file here
-LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(TESTSRC) \
- main.c \
- $(CHIBIOS_CONTRIB)/os/various/crcsw.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(CHIBIOS)/os/various \
- $(CHIBIOS_CONTRIB)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m0
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra -Wundef
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
-include $(RULESPATH)/rules.mk
+CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk +# HAL-OSAL files (optional). +include $(CHIBIOS_CONTRIB)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F0xx/platform.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). +#include $(CHIBIOS)/test/lib/test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS_CONTRIB)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F0xx/crc/chconf.h b/testhal/STM32/STM32F0xx/crc/chconf.h index 6a187da..53bd676 100644 --- a/testhal/STM32/STM32F0xx/crc/chconf.h +++ b/testhal/STM32/STM32F0xx/crc/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -52,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000
/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 32
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 32
+
+/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
@@ -296,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE
/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
@@ -310,6 +331,56 @@ /*===========================================================================*/
/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
* @name Debug options
* @{
*/
@@ -408,6 +479,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -416,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/STM32/STM32F0xx/crc/halconf.h b/testhal/STM32/STM32F0xx/crc/halconf.h index 6e2d3c7..95e89c1 100644 --- a/testhal/STM32/STM32F0xx/crc/halconf.h +++ b/testhal/STM32/STM32F0xx/crc/halconf.h @@ -1,347 +1,419 @@ -/*
- ChibiOS - Copyright (C) 2015 Michael D. Spradling
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* Community drivers's includes */
-/*===========================================================================*/
-
-#include "halconf_community.h"
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#include "halconf_community.h" + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/crc/halconf_community.h b/testhal/STM32/STM32F0xx/crc/halconf_community.h index 31ac01e..91233ed 100644 --- a/testhal/STM32/STM32F0xx/crc/halconf_community.h +++ b/testhal/STM32/STM32F0xx/crc/halconf_community.h @@ -66,6 +66,48 @@ #define HAL_USE_RNG FALSE
#endif
+/**
+ * @brief Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
+#endif
+
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
@@ -94,25 +136,38 @@ #define ONEWIRE_USE_SEARCH_ROM TRUE
/*===========================================================================*/
-/* CRC driver settings. */
+/* QEI driver related settings. */
/*===========================================================================*/
/**
- * @brief Enables DMA engine when performing CRC transactions.
- * @note Enabling this option also enables asynchronous API.
+ * @brief Enables discard of overlow
*/
-#if !defined(CRC_USE_DMA) || defined(__DOXYGEN__)
-#define CRC_USE_DMA FALSE
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
#endif
/**
- * @brief Enables the @p crcAcquireUnit() and @p crcReleaseUnit() APIs.
- * @note Disabling this option saves both code and data space.
+ * @brief Enables min max of overlow
*/
-#if !defined(CRC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define CRC_USE_MUTUAL_EXCLUSION TRUE
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
#endif
+/*===========================================================================*/
+/* EEProm driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables 24xx series I2C eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief Enables 25xx series SPI eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
+
#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F0xx/crc/mcuconf.h b/testhal/STM32/STM32F0xx/crc/mcuconf.h index ad184cd..263cfd2 100644 --- a/testhal/STM32/STM32F0xx/crc/mcuconf.h +++ b/testhal/STM32/STM32F0xx/crc/mcuconf.h @@ -1,166 +1,201 @@ -/*
- ChibiOS - Copyright (C) 2015 Michael D. Spradling
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-/*
- * STM32F0xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 3...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-#define STM32F0xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-#define STM32_HSI_ENABLED TRUE
-#define STM32_HSI14_ENABLED TRUE
-#define STM32_LSI_ENABLED TRUE
-#define STM32_HSE_ENABLED FALSE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
-#define STM32_PREDIV_VALUE 1
-#define STM32_PLLMUL_VALUE 12
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE STM32_PPRE_DIV1
-#define STM32_ADCSW STM32_ADCSW_HSI14
-#define STM32_ADCPRE STM32_ADCPRE_DIV4
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
-#define STM32_ADCPRE STM32_ADCPRE_DIV4
-#define STM32_ADCSW STM32_ADCSW_HSI14
-#define STM32_CECSW STM32_CECSW_HSI
-#define STM32_I2C1SW STM32_I2C1SW_HSI
-#define STM32_USART1SW STM32_USART1SW_PCLK
-#define STM32_RTCSEL STM32_RTCSEL_LSI
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_IRQ_PRIORITY 2
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM14 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 2
-#define STM32_GPT_TIM2_IRQ_PRIORITY 2
-#define STM32_GPT_TIM3_IRQ_PRIORITY 2
-#define STM32_GPT_TIM14_IRQ_PRIORITY 2
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 FALSE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_IRQ_PRIORITY 3
-#define STM32_I2C_I2C2_IRQ_PRIORITY 3
-#define STM32_I2C_USE_DMA TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY 1
-#define STM32_I2C_I2C2_DMA_PRIORITY 1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 3
-#define STM32_ICU_TIM2_IRQ_PRIORITY 3
-#define STM32_ICU_TIM3_IRQ_PRIORITY 3
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 3
-#define STM32_PWM_TIM2_IRQ_PRIORITY 3
-#define STM32_PWM_TIM3_IRQ_PRIORITY 3
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 3
-#define STM32_SERIAL_USART2_PRIORITY 3
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 2
-#define STM32_SPI_SPI2_IRQ_PRIORITY 2
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 2
-#define STM32_ST_USE_TIMER 2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY 3
-#define STM32_UART_USART2_IRQ_PRIORITY 3
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * header for community drivers.
- */
-#include "mcuconf_community.h"
-#endif /* _MCUCONF_H_ */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_PLLNODIV STM32_PLLNODIV_DIV2 +#define STM32_USBSW STM32_USBSW_HSI48 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI16_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI17_20_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI21_22_IRQ_PRIORITY 3 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_ADC1_CKMODE STM32_ADC_CKMODE_ADCCLK +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 +#define STM32_GPT_TIM14_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 3 +#define STM32_I2C_I2C2_IRQ_PRIORITY 3 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI1 FALSE +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_SPI1_MODE (STM32_I2S_MODE_MASTER | \ + STM32_I2S_MODE_RX) +#define STM32_I2S_SPI2_MODE (STM32_I2S_MODE_MASTER | \ + STM32_I2S_MODE_RX) +#define STM32_I2S_SPI1_IRQ_PRIORITY 2 +#define STM32_I2S_SPI2_IRQ_PRIORITY 2 +#define STM32_I2S_SPI1_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2S_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#include "mcuconf_community.h" + +#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F0xx/crc/mcuconf_community.h b/testhal/STM32/STM32F0xx/crc/mcuconf_community.h index bbd2608..cf6a1ce 100644 --- a/testhal/STM32/STM32F0xx/crc/mcuconf_community.h +++ b/testhal/STM32/STM32F0xx/crc/mcuconf_community.h @@ -1,5 +1,5 @@ /* - ChibiOS/RT - Copyright (C) 2015 Michael D. Spradling + ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,94 @@ limitations under the License. */ -#ifndef MCUCONF_COMMUNITY_H -#define MCUCONF_COMMUNITY_H +/* + * FSMC driver system settings. + */ +#define STM32_FSMC_USE_FSMC1 FALSE +#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 + +/* + * FSMC NAND driver system settings. + */ +#define STM32_NAND_USE_FSMC_NAND1 FALSE +#define STM32_NAND_USE_FSMC_NAND2 FALSE +#define STM32_NAND_USE_EXT_INT FALSE +#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_NAND_DMA_PRIORITY 0 +#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") + +/* + * FSMC SRAM driver system settings. + */ +#define STM32_USE_FSMC_SRAM FALSE +#define STM32_SRAM_USE_FSMC_SRAM1 FALSE +#define STM32_SRAM_USE_FSMC_SRAM2 FALSE +#define STM32_SRAM_USE_FSMC_SRAM3 FALSE +#define STM32_SRAM_USE_FSMC_SRAM4 FALSE + +/* + * FSMC SDRAM driver system settings. + */ +#define STM32_USE_FSMC_SDRAM FALSE + +/* + * TIMCAP driver system settings. + */ +#define STM32_TIMCAP_USE_TIM1 TRUE +#define STM32_TIMCAP_USE_TIM2 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE +#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 + +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 + +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 /* * CRC driver system settings. @@ -30,4 +116,40 @@ #define CRCSW_CRC16_TABLE TRUE #define CRCSW_PROGRAMMABLE TRUE -#endif /* MCUCONF_COMMUNITY_H */ +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 + +/* + * QEI driver system settings. + */ +#define STM32_QEI_USE_TIM1 TRUE +#define STM32_QEI_USE_TIM2 FALSE +#define STM32_QEI_USE_TIM3 TRUE +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/STM32/STM32F0xx/onewire/Makefile b/testhal/STM32/STM32F0xx/onewire/Makefile index de965e3..cb248f6 100644 --- a/testhal/STM32/STM32F0xx/onewire/Makefile +++ b/testhal/STM32/STM32F0xx/onewire/Makefile @@ -1,209 +1,219 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
- USE_LDOPT =
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
- USE_LTO = no
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the Cortex-M process stack. This stack is
-# the stack used by the main() thread.
-ifeq ($(USE_PROCESS_STACKSIZE),)
- USE_PROCESS_STACKSIZE = 0x200
-endif
-
-# Stack size to the allocated to the Cortex-M main/exceptions stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
- USE_EXCEPTIONS_STACKSIZE = 0x200
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../../../../../ChibiOS-RT
-CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
-TESTHAL = $(CHIBIOS_CONTRIB)/testhal/common/onewire
-# Startup files.
-include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
-include $(CHIBIOS_CONTRIB)/os/hal/boards/ST_STM32F0308_DISCOVERY/board.mk
-include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk
-include $(CHIBIOS)/os/hal/osal/rt/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/rt/rt.mk
-include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
-
-# Define linker script file here
-LDSCRIPT= $(STARTUPLD)/STM32F030x8.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(TESTSRC) \
- main.c \
- $(TESTHAL)/testhal_onewire.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(CHIBIOS)/os/various \
- $(TESTHAL)
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m0
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wstrict-prototypes -Wundef
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
-include $(RULESPATH)/rules.mk
+############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +TESTHAL = $(CHIBIOS_CONTRIB)/testhal/common/onewire +# Startup files. +include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk +# HAL-OSAL files (optional). +include $(CHIBIOS_CONTRIB)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F0xx/platform.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). +#include $(CHIBIOS)/test/lib/test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c \ + $(TESTHAL)/testhal_onewire.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS_CONTRIB)/os/various \ + $(TESTHAL) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F0xx/onewire/chconf.h b/testhal/STM32/STM32F0xx/onewire/chconf.h index 4b2d922..9339775 100644 --- a/testhal/STM32/STM32F0xx/onewire/chconf.h +++ b/testhal/STM32/STM32F0xx/onewire/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -42,14 +42,26 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
-#define CH_CFG_ST_RESOLUTION 32
+#define CH_CFG_ST_RESOLUTION 16
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
-#define CH_CFG_ST_FREQUENCY 1000
+#define CH_CFG_ST_FREQUENCY 10000
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 16
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 16
/**
* @brief Time delta constant for the tick-less mode.
@@ -296,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE
/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
@@ -310,6 +331,56 @@ /*===========================================================================*/
/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
* @name Debug options
* @{
*/
@@ -408,6 +479,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -416,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/STM32/STM32F0xx/onewire/halconf.h b/testhal/STM32/STM32F0xx/onewire/halconf.h index 64811a5..9449b94 100644 --- a/testhal/STM32/STM32F0xx/onewire/halconf.h +++ b/testhal/STM32/STM32F0xx/onewire/halconf.h @@ -1,387 +1,419 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM TRUE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
-#endif
-
-/*===========================================================================*/
-/* Community drivers's includes */
-/*===========================================================================*/
-
-#include "halconf_community.h"
-
-#endif /* HALCONF_H */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#include "halconf_community.h" + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/onewire/halconf_community.h b/testhal/STM32/STM32F0xx/onewire/halconf_community.h index 0621fdb..df56d7e 100644 --- a/testhal/STM32/STM32F0xx/onewire/halconf_community.h +++ b/testhal/STM32/STM32F0xx/onewire/halconf_community.h @@ -66,6 +66,48 @@ #define HAL_USE_RNG FALSE
#endif
+/**
+ * @brief Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
+#endif
+
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
@@ -93,6 +135,39 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
+/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
+/* EEProm driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables 24xx series I2C eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief Enables 25xx series SPI eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
+
#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F0xx/onewire/mcuconf.h b/testhal/STM32/STM32F0xx/onewire/mcuconf.h index 7773406..5ee745f 100644 --- a/testhal/STM32/STM32F0xx/onewire/mcuconf.h +++ b/testhal/STM32/STM32F0xx/onewire/mcuconf.h @@ -1,171 +1,201 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F0xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 3...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-#define STM32F0xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-#define STM32_HSI_ENABLED TRUE
-#define STM32_HSI14_ENABLED TRUE
-#define STM32_LSI_ENABLED TRUE
-#define STM32_HSE_ENABLED FALSE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
-#define STM32_PREDIV_VALUE 1
-#define STM32_PLLMUL_VALUE 12
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE STM32_PPRE_DIV1
-#define STM32_ADCSW STM32_ADCSW_HSI14
-#define STM32_ADCPRE STM32_ADCPRE_DIV4
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
-#define STM32_ADCPRE STM32_ADCPRE_DIV4
-#define STM32_ADCSW STM32_ADCSW_HSI14
-#define STM32_CECSW STM32_CECSW_HSI
-#define STM32_I2C1SW STM32_I2C1SW_HSI
-#define STM32_USART1SW STM32_USART1SW_PCLK
-#define STM32_RTCSEL STM32_RTCSEL_LSI
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_IRQ_PRIORITY 2
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM14 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 2
-#define STM32_GPT_TIM2_IRQ_PRIORITY 2
-#define STM32_GPT_TIM3_IRQ_PRIORITY 2
-#define STM32_GPT_TIM14_IRQ_PRIORITY 2
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 FALSE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_IRQ_PRIORITY 3
-#define STM32_I2C_I2C2_IRQ_PRIORITY 3
-#define STM32_I2C_I2C1_DMA_PRIORITY 1
-#define STM32_I2C_I2C2_DMA_PRIORITY 1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 3
-#define STM32_ICU_TIM2_IRQ_PRIORITY 3
-#define STM32_ICU_TIM3_IRQ_PRIORITY 3
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 TRUE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 3
-#define STM32_PWM_TIM2_IRQ_PRIORITY 3
-#define STM32_PWM_TIM3_IRQ_PRIORITY 0
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 3
-#define STM32_SERIAL_USART2_PRIORITY 3
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 2
-#define STM32_SPI_SPI2_IRQ_PRIORITY 2
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 3
-#define STM32_ST_USE_TIMER 3
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY 3
-#define STM32_UART_USART2_IRQ_PRIORITY 3
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG FALSE
-
-/*
- * header for community drivers.
- */
-#include "mcuconf_community.h"
-
-#endif /* MCUCONF_H */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_PLLNODIV STM32_PLLNODIV_DIV2 +#define STM32_USBSW STM32_USBSW_HSI48 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI16_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI17_20_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI21_22_IRQ_PRIORITY 3 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_ADC1_CKMODE STM32_ADC_CKMODE_ADCCLK +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 +#define STM32_GPT_TIM14_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 3 +#define STM32_I2C_I2C2_IRQ_PRIORITY 3 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI1 FALSE +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_SPI1_MODE (STM32_I2S_MODE_MASTER | \ + STM32_I2S_MODE_RX) +#define STM32_I2S_SPI2_MODE (STM32_I2S_MODE_MASTER | \ + STM32_I2S_MODE_RX) +#define STM32_I2S_SPI1_IRQ_PRIORITY 2 +#define STM32_I2S_SPI2_IRQ_PRIORITY 2 +#define STM32_I2S_SPI1_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2S_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 TRUE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#include "mcuconf_community.h" + +#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F0xx/onewire/mcuconf_community.h b/testhal/STM32/STM32F0xx/onewire/mcuconf_community.h index 29d7a7a..cf6a1ce 100644 --- a/testhal/STM32/STM32F0xx/onewire/mcuconf_community.h +++ b/testhal/STM32/STM32F0xx/onewire/mcuconf_community.h @@ -14,4 +14,142 @@ limitations under the License. */ +/* + * FSMC driver system settings. + */ +#define STM32_FSMC_USE_FSMC1 FALSE +#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 + +/* + * FSMC NAND driver system settings. + */ +#define STM32_NAND_USE_FSMC_NAND1 FALSE +#define STM32_NAND_USE_FSMC_NAND2 FALSE +#define STM32_NAND_USE_EXT_INT FALSE +#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_NAND_DMA_PRIORITY 0 +#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") + +/* + * FSMC SRAM driver system settings. + */ +#define STM32_USE_FSMC_SRAM FALSE +#define STM32_SRAM_USE_FSMC_SRAM1 FALSE +#define STM32_SRAM_USE_FSMC_SRAM2 FALSE +#define STM32_SRAM_USE_FSMC_SRAM3 FALSE +#define STM32_SRAM_USE_FSMC_SRAM4 FALSE + +/* + * FSMC SDRAM driver system settings. + */ +#define STM32_USE_FSMC_SDRAM FALSE + +/* + * TIMCAP driver system settings. + */ +#define STM32_TIMCAP_USE_TIM1 TRUE +#define STM32_TIMCAP_USE_TIM2 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE +#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 + +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 + +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE + +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 + +/* + * QEI driver system settings. + */ +#define STM32_QEI_USE_TIM1 TRUE +#define STM32_QEI_USE_TIM2 FALSE +#define STM32_QEI_USE_TIM3 TRUE +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/STM32/STM32F0xx/qei/Makefile b/testhal/STM32/STM32F0xx/qei/Makefile index 6dbcf91..7dfc020 100644 --- a/testhal/STM32/STM32F0xx/qei/Makefile +++ b/testhal/STM32/STM32F0xx/qei/Makefile @@ -1,218 +1,216 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
- USE_LDOPT =
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
- USE_LTO = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-# If enabled, this option makes the build process faster by not compiling
-# modules not used in the current configuration.
-ifeq ($(USE_SMART_BUILD),)
- USE_SMART_BUILD = yes
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the Cortex-M process stack. This stack is
-# the stack used by the main() thread.
-ifeq ($(USE_PROCESS_STACKSIZE),)
- USE_PROCESS_STACKSIZE = 0x200
-endif
-
-# Stack size to the allocated to the Cortex-M main/exceptions stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
- USE_EXCEPTIONS_STACKSIZE = 0x400
-endif
-
-# Enables the use of FPU (no, softfp, hard).
-ifeq ($(USE_FPU),)
- USE_FPU = no
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../../../../../ChibiOS-RT
-CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
-# Startup files.
-include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
-include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F0xx/platform.mk
-include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk
-include $(CHIBIOS)/os/hal/osal/rt/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/rt/rt.mk
-include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
-
-# Define linker script file here
-LDSCRIPT = $(STARTUPLD)/STM32F072xB.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(TESTSRC) \
- main.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m0
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra -Wundef
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
-include $(RULESPATH)/rules.mk
-
+############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk +# HAL-OSAL files (optional). +include $(CHIBIOS_CONTRIB)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F0xx/platform.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). +#include $(CHIBIOS)/test/lib/test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS_CONTRIB)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F0xx/qei/chconf.h b/testhal/STM32/STM32F0xx/qei/chconf.h index b3260d4..53bd676 100644 --- a/testhal/STM32/STM32F0xx/qei/chconf.h +++ b/testhal/STM32/STM32F0xx/qei/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -42,7 +42,7 @@ * @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
-#define CH_CFG_ST_RESOLUTION 16
+#define CH_CFG_ST_RESOLUTION 32
/**
* @brief System tick frequency.
@@ -52,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000
/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 32
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 32
+
+/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
@@ -296,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE
/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
@@ -310,6 +331,56 @@ /*===========================================================================*/
/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
* @name Debug options
* @{
*/
@@ -329,7 +400,7 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
/**
* @brief Debug option, parameters checks.
@@ -338,7 +409,7 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#define CH_DBG_ENABLE_CHECKS TRUE
/**
* @brief Debug option, consistency checks.
@@ -348,7 +419,7 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#define CH_DBG_ENABLE_ASSERTS TRUE
/**
* @brief Debug option, trace buffer.
@@ -356,7 +427,7 @@ *
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
/**
* @brief Trace buffer entries.
@@ -375,7 +446,7 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
/**
* @brief Debug option, stacks initialization.
@@ -385,7 +456,7 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#define CH_DBG_FILL_THREADS TRUE
/**
* @brief Debug option, threads profiling.
@@ -408,6 +479,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -416,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/STM32/STM32F0xx/qei/halconf.h b/testhal/STM32/STM32F0xx/qei/halconf.h index 93cc713..95e89c1 100644 --- a/testhal/STM32/STM32F0xx/qei/halconf.h +++ b/testhal/STM32/STM32F0xx/qei/halconf.h @@ -1,387 +1,419 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
-#endif
-
-/*===========================================================================*/
-/* Community drivers's includes */
-/*===========================================================================*/
-
-#include "halconf_community.h"
-
-#endif /* HALCONF_H */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#include "halconf_community.h" + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/qei/halconf_community.h b/testhal/STM32/STM32F0xx/qei/halconf_community.h index 95f1ee6..14fb2ca 100644 --- a/testhal/STM32/STM32F0xx/qei/halconf_community.h +++ b/testhal/STM32/STM32F0xx/qei/halconf_community.h @@ -67,12 +67,47 @@ #endif
/**
+ * @brief Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
* @brief Enables the QEI subsystem.
*/
#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
#define HAL_USE_QEI TRUE
#endif
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
+#endif
+
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
@@ -98,7 +133,7 @@ * @brief Enables search ROM feature.
* @note Disabling this option saves both code and data space.
*/
-#define ONEWIRE_USE_SEARCH_ROM FALSE
+#define ONEWIRE_USE_SEARCH_ROM TRUE
/*===========================================================================*/
/* QEI driver related settings. */
@@ -118,6 +153,21 @@ #define QEI_USE_OVERFLOW_MINMAX FALSE
#endif
+/*===========================================================================*/
+/* EEProm driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables 24xx series I2C eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief Enables 25xx series SPI eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
+
#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F0xx/qei/mcuconf.h b/testhal/STM32/STM32F0xx/qei/mcuconf.h index 6fb24b0..263cfd2 100644 --- a/testhal/STM32/STM32F0xx/qei/mcuconf.h +++ b/testhal/STM32/STM32F0xx/qei/mcuconf.h @@ -1,191 +1,201 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F0xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 3...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-#define STM32F0xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-#define STM32_HSI_ENABLED TRUE
-#define STM32_HSI14_ENABLED TRUE
-#define STM32_LSI_ENABLED TRUE
-#define STM32_HSE_ENABLED FALSE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
-#define STM32_PREDIV_VALUE 1
-#define STM32_PLLMUL_VALUE 12
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE STM32_PPRE_DIV1
-#define STM32_ADCSW STM32_ADCSW_HSI14
-#define STM32_ADCPRE STM32_ADCPRE_DIV4
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
-#define STM32_ADCPRE STM32_ADCPRE_DIV4
-#define STM32_ADCSW STM32_ADCSW_HSI14
-#define STM32_CECSW STM32_CECSW_HSI
-#define STM32_I2C1SW STM32_I2C1SW_HSI
-#define STM32_USART1SW STM32_USART1SW_PCLK
-#define STM32_RTCSEL STM32_RTCSEL_LSI
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_IRQ_PRIORITY 2
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1 FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM14 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 2
-#define STM32_GPT_TIM2_IRQ_PRIORITY 2
-#define STM32_GPT_TIM3_IRQ_PRIORITY 2
-#define STM32_GPT_TIM14_IRQ_PRIORITY 2
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 FALSE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_IRQ_PRIORITY 3
-#define STM32_I2C_I2C2_IRQ_PRIORITY 3
-#define STM32_I2C_USE_DMA TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY 1
-#define STM32_I2C_I2C2_DMA_PRIORITY 1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 3
-#define STM32_ICU_TIM2_IRQ_PRIORITY 3
-#define STM32_ICU_TIM3_IRQ_PRIORITY 3
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 3
-#define STM32_PWM_TIM2_IRQ_PRIORITY 3
-#define STM32_PWM_TIM3_IRQ_PRIORITY 3
-
-/*
- * RTC driver system settings.
- */
-#define STM32_RTC_IRQ_PRIORITY 15
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 3
-#define STM32_SERIAL_USART2_PRIORITY 3
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 2
-#define STM32_SPI_SPI2_IRQ_PRIORITY 2
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 2
-#define STM32_ST_USE_TIMER 2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY 3
-#define STM32_UART_USART2_IRQ_PRIORITY 3
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1 FALSE
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG TRUE
-
-/*
- * header for community drivers.
- */
-#include "mcuconf_community.h"
-
-#endif /* MCUCONF_H */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_PLLNODIV STM32_PLLNODIV_DIV2 +#define STM32_USBSW STM32_USBSW_HSI48 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI16_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI17_20_IRQ_PRIORITY 3 +#define STM32_IRQ_EXTI21_22_IRQ_PRIORITY 3 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_ADC1_CKMODE STM32_ADC_CKMODE_ADCCLK +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 +#define STM32_GPT_TIM14_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 3 +#define STM32_I2C_I2C2_IRQ_PRIORITY 3 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI1 FALSE +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_SPI1_MODE (STM32_I2S_MODE_MASTER | \ + STM32_I2S_MODE_RX) +#define STM32_I2S_SPI2_MODE (STM32_I2S_MODE_MASTER | \ + STM32_I2S_MODE_RX) +#define STM32_I2S_SPI1_IRQ_PRIORITY 2 +#define STM32_I2S_SPI2_IRQ_PRIORITY 2 +#define STM32_I2S_SPI1_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2S_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#include "mcuconf_community.h" + +#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F0xx/qei/mcuconf_community.h b/testhal/STM32/STM32F0xx/qei/mcuconf_community.h index b89bc7a..cf6a1ce 100644 --- a/testhal/STM32/STM32F0xx/qei/mcuconf_community.h +++ b/testhal/STM32/STM32F0xx/qei/mcuconf_community.h @@ -1,5 +1,5 @@ /* - ChibiOS/RT - Copyright (C) 2016 + ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,17 +14,142 @@ limitations under the License. */ -#ifndef MCUCONF_COMMUNITY_H -#define MCUCONF_COMMUNITY_H +/* + * FSMC driver system settings. + */ +#define STM32_FSMC_USE_FSMC1 FALSE +#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 + +/* + * FSMC NAND driver system settings. + */ +#define STM32_NAND_USE_FSMC_NAND1 FALSE +#define STM32_NAND_USE_FSMC_NAND2 FALSE +#define STM32_NAND_USE_EXT_INT FALSE +#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_NAND_DMA_PRIORITY 0 +#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") + +/* + * FSMC SRAM driver system settings. + */ +#define STM32_USE_FSMC_SRAM FALSE +#define STM32_SRAM_USE_FSMC_SRAM1 FALSE +#define STM32_SRAM_USE_FSMC_SRAM2 FALSE +#define STM32_SRAM_USE_FSMC_SRAM3 FALSE +#define STM32_SRAM_USE_FSMC_SRAM4 FALSE + +/* + * FSMC SDRAM driver system settings. + */ +#define STM32_USE_FSMC_SDRAM FALSE + +/* + * TIMCAP driver system settings. + */ +#define STM32_TIMCAP_USE_TIM1 TRUE +#define STM32_TIMCAP_USE_TIM2 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE +#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 + +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 + +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 + +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE + +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 /* * QEI driver system settings. */ -#define STM32_QEI_USE_TIM1 FALSE +#define STM32_QEI_USE_TIM1 TRUE #define STM32_QEI_USE_TIM2 FALSE #define STM32_QEI_USE_TIM3 TRUE #define STM32_QEI_TIM1_IRQ_PRIORITY 3 #define STM32_QEI_TIM2_IRQ_PRIORITY 3 #define STM32_QEI_TIM3_IRQ_PRIORITY 3 - -#endif /* MCUCONF_COMMUNITY_H */ diff --git a/testhal/STM32/STM32F1xx/onewire/Makefile b/testhal/STM32/STM32F1xx/onewire/Makefile index e9d4238..5b72418 100644 --- a/testhal/STM32/STM32F1xx/onewire/Makefile +++ b/testhal/STM32/STM32F1xx/onewire/Makefile @@ -1,217 +1,224 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
- USE_LDOPT =
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
- USE_LTO = no
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the Cortex-M process stack. This stack is
-# the stack used by the main() thread.
-ifeq ($(USE_PROCESS_STACKSIZE),)
- USE_PROCESS_STACKSIZE = 0x400
-endif
-
-# Stack size to the allocated to the Cortex-M main/exceptions stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
- USE_EXCEPTIONS_STACKSIZE = 0x400
-endif
-
-# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
-ifeq ($(USE_FPU),)
- USE_FPU = no
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
+############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
-TESTHAL = $(CHIBIOS_CONTRIB)/testhal/common/onewire
-# Startup files.
-include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
-include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk
-include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_103STK/board.mk
-include $(CHIBIOS)/os/hal/osal/rt/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/rt/rt.mk
-include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
-# Other files (optional).
-#include $(CHIBIOS)/test/rt/test.mk
-
-# Define linker script file here
-LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(TESTSRC) \
- main.c \
- $(TESTHAL)/testhal_onewire.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(CHIBIOS)/os/various \
- $(TESTHAL)
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m3
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wstrict-prototypes -Wundef
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra -Wundef
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
-include $(RULESPATH)/rules.mk
-
+CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +TESTHAL = $(CHIBIOS_CONTRIB)/testhal/common/onewire +# Startup files. +include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk +# HAL-OSAL files (optional). +include $(CHIBIOS_CONTRIB)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F1xx/platform.mk +include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). +#include $(CHIBIOS)/test/lib/test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c \ + $(TESTHAL)/testhal_onewire.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS_CONTRIB)/os/various \ + $(TESTHAL) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F1xx/onewire/chconf.h b/testhal/STM32/STM32F1xx/onewire/chconf.h index b38dfa3..42ee69b 100644 --- a/testhal/STM32/STM32F1xx/onewire/chconf.h +++ b/testhal/STM32/STM32F1xx/onewire/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -52,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000
/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 32
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 32
+
+/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
@@ -141,7 +153,7 @@ *
* @note The default is @p TRUE.
*/
-#define CH_CFG_USE_TM TRUE
+#define CH_CFG_USE_TM FALSE
/**
* @brief Threads registry APIs.
@@ -296,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE
/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
@@ -310,6 +331,56 @@ /*===========================================================================*/
/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
* @name Debug options
* @{
*/
@@ -408,6 +479,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -416,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/STM32/STM32F1xx/onewire/halconf.h b/testhal/STM32/STM32F1xx/onewire/halconf.h index 64811a5..9449b94 100644 --- a/testhal/STM32/STM32F1xx/onewire/halconf.h +++ b/testhal/STM32/STM32F1xx/onewire/halconf.h @@ -1,387 +1,419 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM TRUE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
-#endif
-
-/*===========================================================================*/
-/* Community drivers's includes */
-/*===========================================================================*/
-
-#include "halconf_community.h"
-
-#endif /* HALCONF_H */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#include "halconf_community.h" + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/onewire/halconf_community.h b/testhal/STM32/STM32F1xx/onewire/halconf_community.h index 0621fdb..df56d7e 100644 --- a/testhal/STM32/STM32F1xx/onewire/halconf_community.h +++ b/testhal/STM32/STM32F1xx/onewire/halconf_community.h @@ -66,6 +66,48 @@ #define HAL_USE_RNG FALSE
#endif
+/**
+ * @brief Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
+#endif
+
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
@@ -93,6 +135,39 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
+/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
+/* EEProm driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables 24xx series I2C eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief Enables 25xx series SPI eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
+
#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F1xx/onewire/mcuconf.h b/testhal/STM32/STM32F1xx/onewire/mcuconf.h index 807293a..5032eb6 100644 --- a/testhal/STM32/STM32F1xx/onewire/mcuconf.h +++ b/testhal/STM32/STM32F1xx/onewire/mcuconf.h @@ -1,209 +1,216 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#define STM32F103_MCUCONF
-
-/*
- * STM32F103 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_HSI_ENABLED TRUE
-#define STM32_LSI_ENABLED FALSE
-#define STM32_HSE_ENABLED TRUE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSE
-#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
-#define STM32_PLLMUL_VALUE 9
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE1 STM32_PPRE1_DIV2
-#define STM32_PPRE2 STM32_PPRE2_DIV2
-#define STM32_ADCPRE STM32_ADCPRE_DIV4
-#define STM32_USB_CLOCK_REQUIRED TRUE
-#define STM32_USBPRE STM32_USBPRE_DIV1P5
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
-#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_ADC1_IRQ_PRIORITY 6
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1 FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM4 FALSE
-#define STM32_GPT_USE_TIM5 FALSE
-#define STM32_GPT_USE_TIM8 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7
-#define STM32_GPT_TIM5_IRQ_PRIORITY 7
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 FALSE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_IRQ_PRIORITY 5
-#define STM32_I2C_I2C2_IRQ_PRIORITY 5
-#define STM32_I2C_I2C1_DMA_PRIORITY 3
-#define STM32_I2C_I2C2_DMA_PRIORITY 3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_USE_TIM4 FALSE
-#define STM32_ICU_USE_TIM5 FALSE
-#define STM32_ICU_USE_TIM8 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7
-#define STM32_ICU_TIM5_IRQ_PRIORITY 7
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 TRUE
-#define STM32_PWM_USE_TIM4 FALSE
-#define STM32_PWM_USE_TIM5 FALSE
-#define STM32_PWM_USE_TIM8 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7
-#define STM32_PWM_TIM5_IRQ_PRIORITY 7
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7
-
-/*
- * RTC driver system settings.
- */
-#define STM32_RTC_IRQ_PRIORITY 15
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
-#define STM32_SERIAL_UART4_PRIORITY 12
-#define STM32_SERIAL_UART5_PRIORITY 12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_USE_SPI3 FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI3_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 8
-#define STM32_ST_USE_TIMER 2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USE_USART3 FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY 12
-#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_USART3_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1 FALSE
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
-
-/*
- * header for community drivers.
- */
-#include "mcuconf_community.h"
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 6 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 TRUE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#include "mcuconf_community.h" + +#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F1xx/onewire/mcuconf_community.h b/testhal/STM32/STM32F1xx/onewire/mcuconf_community.h index 7c438a8..cf6a1ce 100644 --- a/testhal/STM32/STM32F1xx/onewire/mcuconf_community.h +++ b/testhal/STM32/STM32F1xx/onewire/mcuconf_community.h @@ -14,3 +14,142 @@ limitations under the License. */ +/* + * FSMC driver system settings. + */ +#define STM32_FSMC_USE_FSMC1 FALSE +#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 + +/* + * FSMC NAND driver system settings. + */ +#define STM32_NAND_USE_FSMC_NAND1 FALSE +#define STM32_NAND_USE_FSMC_NAND2 FALSE +#define STM32_NAND_USE_EXT_INT FALSE +#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_NAND_DMA_PRIORITY 0 +#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") + +/* + * FSMC SRAM driver system settings. + */ +#define STM32_USE_FSMC_SRAM FALSE +#define STM32_SRAM_USE_FSMC_SRAM1 FALSE +#define STM32_SRAM_USE_FSMC_SRAM2 FALSE +#define STM32_SRAM_USE_FSMC_SRAM3 FALSE +#define STM32_SRAM_USE_FSMC_SRAM4 FALSE + +/* + * FSMC SDRAM driver system settings. + */ +#define STM32_USE_FSMC_SDRAM FALSE + +/* + * TIMCAP driver system settings. + */ +#define STM32_TIMCAP_USE_TIM1 TRUE +#define STM32_TIMCAP_USE_TIM2 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE +#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 + +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 + +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 + +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE + +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 + +/* + * QEI driver system settings. + */ +#define STM32_QEI_USE_TIM1 TRUE +#define STM32_QEI_USE_TIM2 FALSE +#define STM32_QEI_USE_TIM3 TRUE +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/STM32/STM32F1xx/qei/Makefile b/testhal/STM32/STM32F1xx/qei/Makefile index a232838..f7a7450 100644 --- a/testhal/STM32/STM32F1xx/qei/Makefile +++ b/testhal/STM32/STM32F1xx/qei/Makefile @@ -1,218 +1,221 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
- USE_LDOPT =
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
- USE_LTO = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-# If enabled, this option makes the build process faster by not compiling
-# modules not used in the current configuration.
-ifeq ($(USE_SMART_BUILD),)
- USE_SMART_BUILD = yes
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the Cortex-M process stack. This stack is
-# the stack used by the main() thread.
-ifeq ($(USE_PROCESS_STACKSIZE),)
- USE_PROCESS_STACKSIZE = 0x400
-endif
-
-# Stack size to the allocated to the Cortex-M main/exceptions stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
- USE_EXCEPTIONS_STACKSIZE = 0x400
-endif
-
-# Enables the use of FPU (no, softfp, hard).
-ifeq ($(USE_FPU),)
- USE_FPU = no
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../../../../../ChibiOS-RT
-CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
-# Startup files.
-include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
-include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F1xx/platform.mk
-include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_103STK/board.mk
-include $(CHIBIOS)/os/hal/osal/rt/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/rt/rt.mk
-include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
-
-# Define linker script file here
-LDSCRIPT = $(STARTUPLD)/STM32F103xB.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(TESTSRC) \
- main.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m3
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra -Wundef
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
-include $(RULESPATH)/rules.mk
-
+############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk +# HAL-OSAL files (optional). +include $(CHIBIOS_CONTRIB)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F1xx/platform.mk +include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). +#include $(CHIBIOS)/test/lib/test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS_CONTRIB)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F1xx/qei/chconf.h b/testhal/STM32/STM32F1xx/qei/chconf.h index b3260d4..42ee69b 100644 --- a/testhal/STM32/STM32F1xx/qei/chconf.h +++ b/testhal/STM32/STM32F1xx/qei/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -52,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000
/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 32
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 32
+
+/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
@@ -296,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE
/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
@@ -310,6 +331,56 @@ /*===========================================================================*/
/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
* @name Debug options
* @{
*/
@@ -329,7 +400,7 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
/**
* @brief Debug option, parameters checks.
@@ -338,7 +409,7 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#define CH_DBG_ENABLE_CHECKS TRUE
/**
* @brief Debug option, consistency checks.
@@ -348,7 +419,7 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#define CH_DBG_ENABLE_ASSERTS TRUE
/**
* @brief Debug option, trace buffer.
@@ -356,7 +427,7 @@ *
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
/**
* @brief Trace buffer entries.
@@ -375,7 +446,7 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
/**
* @brief Debug option, stacks initialization.
@@ -385,7 +456,7 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#define CH_DBG_FILL_THREADS TRUE
/**
* @brief Debug option, threads profiling.
@@ -408,6 +479,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -416,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/STM32/STM32F1xx/qei/halconf.h b/testhal/STM32/STM32F1xx/qei/halconf.h index 93cc713..95e89c1 100644 --- a/testhal/STM32/STM32F1xx/qei/halconf.h +++ b/testhal/STM32/STM32F1xx/qei/halconf.h @@ -1,387 +1,419 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
-#endif
-
-/*===========================================================================*/
-/* Community drivers's includes */
-/*===========================================================================*/
-
-#include "halconf_community.h"
-
-#endif /* HALCONF_H */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#include "halconf_community.h" + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/qei/halconf_community.h b/testhal/STM32/STM32F1xx/qei/halconf_community.h index 9c28ead..350a3a9 100644 --- a/testhal/STM32/STM32F1xx/qei/halconf_community.h +++ b/testhal/STM32/STM32F1xx/qei/halconf_community.h @@ -67,12 +67,47 @@ #endif
/**
+ * @brief Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
* @brief Enables the QEI subsystem.
*/
#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
#define HAL_USE_QEI TRUE
#endif
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
+#endif
+
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
@@ -98,7 +133,58 @@ * @brief Enables search ROM feature.
* @note Disabling this option saves both code and data space.
*/
-#define ONEWIRE_USE_SEARCH_ROM FALSE
+#define ONEWIRE_USE_SEARCH_ROM TRUE
+
+/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
+/* EEProm driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables 24xx series I2C eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief Enables 25xx series SPI eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
+
+/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
#endif /* HALCONF_COMMUNITY_H */
diff --git a/testhal/STM32/STM32F1xx/qei/mcuconf.h b/testhal/STM32/STM32F1xx/qei/mcuconf.h index f3ccaf0..0fe31cc 100644 --- a/testhal/STM32/STM32F1xx/qei/mcuconf.h +++ b/testhal/STM32/STM32F1xx/qei/mcuconf.h @@ -1,219 +1,216 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F103 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-#define STM32F103_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_HSI_ENABLED TRUE
-#define STM32_LSI_ENABLED FALSE
-#define STM32_HSE_ENABLED TRUE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSE
-#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
-#define STM32_PLLMUL_VALUE 9
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE1 STM32_PPRE1_DIV2
-#define STM32_PPRE2 STM32_PPRE2_DIV2
-#define STM32_ADCPRE STM32_ADCPRE_DIV4
-#define STM32_USB_CLOCK_REQUIRED TRUE
-#define STM32_USBPRE STM32_USBPRE_DIV1P5
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
-#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_ADC1_IRQ_PRIORITY 6
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1 FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM4 FALSE
-#define STM32_GPT_USE_TIM5 FALSE
-#define STM32_GPT_USE_TIM8 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7
-#define STM32_GPT_TIM5_IRQ_PRIORITY 7
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 FALSE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_IRQ_PRIORITY 5
-#define STM32_I2C_I2C2_IRQ_PRIORITY 5
-#define STM32_I2C_I2C1_DMA_PRIORITY 3
-#define STM32_I2C_I2C2_DMA_PRIORITY 3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_USE_TIM4 FALSE
-#define STM32_ICU_USE_TIM5 FALSE
-#define STM32_ICU_USE_TIM8 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7
-#define STM32_ICU_TIM5_IRQ_PRIORITY 7
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 FALSE
-#define STM32_PWM_USE_TIM4 FALSE
-#define STM32_PWM_USE_TIM5 FALSE
-#define STM32_PWM_USE_TIM8 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7
-#define STM32_PWM_TIM5_IRQ_PRIORITY 7
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7
-
-/*
- * RTC driver system settings.
- */
-#define STM32_RTC_IRQ_PRIORITY 15
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
-#define STM32_SERIAL_UART4_PRIORITY 12
-#define STM32_SERIAL_UART5_PRIORITY 12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_USE_SPI3 FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI3_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 8
-#define STM32_ST_USE_TIMER 2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USE_USART3 FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY 12
-#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_USART3_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1 FALSE
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG TRUE
-
-/*
- * header for community drivers.
- */
-#include "mcuconf_community.h"
-
-#endif /* MCUCONF_H */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 6 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#include "mcuconf_community.h" + +#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F1xx/qei/mcuconf_community.h b/testhal/STM32/STM32F1xx/qei/mcuconf_community.h index 2c1a688..cf6a1ce 100644 --- a/testhal/STM32/STM32F1xx/qei/mcuconf_community.h +++ b/testhal/STM32/STM32F1xx/qei/mcuconf_community.h @@ -1,5 +1,5 @@ /* - ChibiOS/RT - Copyright (C) 2016 + ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,28 +14,142 @@ limitations under the License. */ -#ifndef MCUCONF_COMMUNITY_H -#define MCUCONF_COMMUNITY_H +/* + * FSMC driver system settings. + */ +#define STM32_FSMC_USE_FSMC1 FALSE +#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 + +/* + * FSMC NAND driver system settings. + */ +#define STM32_NAND_USE_FSMC_NAND1 FALSE +#define STM32_NAND_USE_FSMC_NAND2 FALSE +#define STM32_NAND_USE_EXT_INT FALSE +#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_NAND_DMA_PRIORITY 0 +#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") /* * FSMC SRAM driver system settings. */ #define STM32_USE_FSMC_SRAM FALSE +#define STM32_SRAM_USE_FSMC_SRAM1 FALSE +#define STM32_SRAM_USE_FSMC_SRAM2 FALSE +#define STM32_SRAM_USE_FSMC_SRAM3 FALSE +#define STM32_SRAM_USE_FSMC_SRAM4 FALSE + +/* + * FSMC SDRAM driver system settings. + */ +#define STM32_USE_FSMC_SDRAM FALSE + +/* + * TIMCAP driver system settings. + */ +#define STM32_TIMCAP_USE_TIM1 TRUE +#define STM32_TIMCAP_USE_TIM2 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE +#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 + +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 + +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 + +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE + +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 /* * QEI driver system settings. */ -#define STM32_QEI_USE_TIM1 FALSE +#define STM32_QEI_USE_TIM1 TRUE #define STM32_QEI_USE_TIM2 FALSE #define STM32_QEI_USE_TIM3 TRUE -#define STM32_QEI_USE_TIM4 FALSE -#define STM32_QEI_USE_TIM5 FALSE -#define STM32_QEI_USE_TIM8 FALSE -#define STM32_QEI_TIM1_IRQ_PRIORITY 7 -#define STM32_QEI_TIM2_IRQ_PRIORITY 7 -#define STM32_QEI_TIM3_IRQ_PRIORITY 7 -#define STM32_QEI_TIM4_IRQ_PRIORITY 7 -#define STM32_QEI_TIM5_IRQ_PRIORITY 7 -#define STM32_QEI_TIM8_IRQ_PRIORITY 7 - -#endif /* MCUCONF_COMMUNITY_H */ +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/STM32/STM32F3xx/COMP/Makefile b/testhal/STM32/STM32F3xx/COMP/Makefile index 90ada53..0e3d04d 100644 --- a/testhal/STM32/STM32F3xx/COMP/Makefile +++ b/testhal/STM32/STM32F3xx/COMP/Makefile @@ -69,7 +69,7 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400
endif
-# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+# Enables the use of FPU (no, softfp, hard).
ifeq ($(USE_FPU),)
USE_FPU = no
endif
@@ -99,7 +99,9 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
# Other files (optional).
-#include $(CHIBIOS)/test/rt/test.mk
+#include $(CHIBIOS)/test/lib/test.mk
+#include $(CHIBIOS)/test/rt/rt_test.mk
+#include $(CHIBIOS)/test/oslib/oslib_test.mk
# Define linker script file here
LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld
@@ -147,7 +149,7 @@ ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) INCDIR = $(CHIBIOS)/os/license \
$(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
$(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(CHIBIOS)/os/various
+ $(CHIBIOS_CONTRIB)/os/various
#
# Project, sources and paths
diff --git a/testhal/STM32/STM32F3xx/COMP/chconf.h b/testhal/STM32/STM32F3xx/COMP/chconf.h index 894f737..53bd676 100644 --- a/testhal/STM32/STM32F3xx/COMP/chconf.h +++ b/testhal/STM32/STM32F3xx/COMP/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -52,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000
/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 32
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 32
+
+/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
@@ -141,7 +153,7 @@ *
* @note The default is @p TRUE.
*/
-#define CH_CFG_USE_TM TRUE
+#define CH_CFG_USE_TM FALSE
/**
* @brief Threads registry APIs.
@@ -296,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE
/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
@@ -310,6 +331,56 @@ /*===========================================================================*/
/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
* @name Debug options
* @{
*/
@@ -408,6 +479,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -416,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/STM32/STM32F3xx/COMP/halconf.h b/testhal/STM32/STM32F3xx/COMP/halconf.h index 2471ec7..9192b27 100644 --- a/testhal/STM32/STM32F3xx/COMP/halconf.h +++ b/testhal/STM32/STM32F3xx/COMP/halconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -41,7 +41,7 @@ * @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
+#define HAL_USE_ADC TRUE
#endif
/**
@@ -52,6 +52,13 @@ #endif
/**
+ * @brief Enables the cryptographic subsystem.
+ */
+#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
+#define HAL_USE_CRY FALSE
+#endif
+
+/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
@@ -62,7 +69,7 @@ * @brief Enables the EXT subsystem.
*/
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT TRUE
+#define HAL_USE_EXT FALSE
#endif
/**
@@ -115,6 +122,13 @@ #endif
/**
+ * @brief Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI FALSE
+#endif
+
+/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
@@ -202,6 +216,28 @@ #endif
/*===========================================================================*/
+/* CRY driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the SW fall-back of the cryptographic driver.
+ * @details When enabled, this option, activates a fall-back software
+ * implementation for algorithms not supported by the underlying
+ * hardware.
+ * @note Fall-back implementations may not be present for all algorithms.
+ */
+#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_USE_FALLBACK FALSE
+#endif
+
+/**
+ * @brief Makes the driver forcibly use the fall-back implementations.
+ */
+#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
+#define HAL_CRY_ENFORCE_FALLBACK FALSE
+#endif
+
+/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
@@ -376,10 +412,6 @@ #define USB_USE_WAIT FALSE
#endif
-/*===========================================================================*/
-/* Community drivers's includes */
-/*===========================================================================*/
-
#include "halconf_community.h"
#endif /* HALCONF_H */
diff --git a/testhal/STM32/STM32F3xx/COMP/halconf_community.h b/testhal/STM32/STM32F3xx/COMP/halconf_community.h index df052f8..76d4856 100644 --- a/testhal/STM32/STM32F3xx/COMP/halconf_community.h +++ b/testhal/STM32/STM32F3xx/COMP/halconf_community.h @@ -84,7 +84,28 @@ * @brief Enables the TIMCAP subsystem.
*/
#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
-#define HAL_USE_COMP TRUE
+#define HAL_USE_COMP TRUE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
#endif
/*===========================================================================*/
@@ -115,6 +136,24 @@ #define ONEWIRE_USE_SEARCH_ROM TRUE
/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
/* EEProm driver related settings. */
/*===========================================================================*/
@@ -122,12 +161,12 @@ * @brief Enables 24xx series I2C eeprom device driver.
* @note Disabling this option saves both code and data space.
*/
-#define EEPROM_USE_EE24XX TRUE
+#define EEPROM_USE_EE24XX FALSE
/**
* @brief Enables 25xx series SPI eeprom device driver.
* @note Disabling this option saves both code and data space.
*/
-#define EEPROM_USE_EE25XX TRUE
+#define EEPROM_USE_EE25XX FALSE
#endif /* HALCONF_COMMUNITY_H */
diff --git a/testhal/STM32/STM32F3xx/COMP/mcuconf.h b/testhal/STM32/STM32F3xx/COMP/mcuconf.h index 0d37614..9b14ad7 100644 --- a/testhal/STM32/STM32F3xx/COMP/mcuconf.h +++ b/testhal/STM32/STM32F3xx/COMP/mcuconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -67,14 +67,33 @@ #define STM32_USBPRE STM32_USBPRE_DIV1P5
/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY 6
+#define STM32_IRQ_EXTI1_PRIORITY 6
+#define STM32_IRQ_EXTI2_PRIORITY 6
+#define STM32_IRQ_EXTI3_PRIORITY 6
+#define STM32_IRQ_EXTI4_PRIORITY 6
+#define STM32_IRQ_EXTI5_9_PRIORITY 6
+#define STM32_IRQ_EXTI10_15_PRIORITY 6
+#define STM32_IRQ_EXTI16_PRIORITY 6
+#define STM32_IRQ_EXTI17_PRIORITY 6
+#define STM32_IRQ_EXTI18_PRIORITY 6
+#define STM32_IRQ_EXTI19_PRIORITY 6
+#define STM32_IRQ_EXTI20_PRIORITY 6
+#define STM32_IRQ_EXTI21_22_29_PRIORITY 6
+#define STM32_IRQ_EXTI30_32_PRIORITY 6
+#define STM32_IRQ_EXTI33_PRIORITY 6
+
+/*
* ADC driver system settings.
*/
#define STM32_ADC_DUAL_MODE FALSE
#define STM32_ADC_COMPACT_SAMPLES FALSE
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_USE_ADC2 FALSE
-#define STM32_ADC_USE_ADC3 FALSE
-#define STM32_ADC_USE_ADC4 FALSE
+#define STM32_ADC_USE_ADC1 TRUE
+#define STM32_ADC_USE_ADC2 TRUE
+#define STM32_ADC_USE_ADC3 TRUE
+#define STM32_ADC_USE_ADC4 TRUE
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
@@ -96,7 +115,7 @@ /*
* CAN driver system settings.
*/
-#define STM32_CAN_USE_CAN1 TRUE
+#define STM32_CAN_USE_CAN1 FALSE
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
/*
@@ -104,32 +123,13 @@ */
#define STM32_DAC_DUAL_MODE FALSE
#define STM32_DAC_USE_DAC1_CH1 TRUE
-#define STM32_DAC_USE_DAC1_CH2 FALSE
+#define STM32_DAC_USE_DAC1_CH2 TRUE
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI33_IRQ_PRIORITY 6
-
-/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
@@ -150,7 +150,7 @@ /*
* I2C driver system settings.
*/
-#define STM32_I2C_USE_I2C1 TRUE
+#define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 10
@@ -206,7 +206,7 @@ /*
* SPI driver system settings.
*/
-#define STM32_SPI_USE_SPI1 TRUE
+#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_USE_SPI3 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
@@ -248,11 +248,8 @@ /*
* WDG driver system settings.
*/
-#define STM32_WDG_USE_IWDG TRUE
+#define STM32_WDG_USE_IWDG FALSE
-/*
- * header for community drivers.
- */
#include "mcuconf_community.h"
#endif /* MCUCONF_H */
diff --git a/testhal/STM32/STM32F3xx/COMP/mcuconf_community.h b/testhal/STM32/STM32F3xx/COMP/mcuconf_community.h index 1f89e54..cf6a1ce 100644 --- a/testhal/STM32/STM32F3xx/COMP/mcuconf_community.h +++ b/testhal/STM32/STM32F3xx/COMP/mcuconf_community.h @@ -47,13 +47,13 @@ /* * TIMCAP driver system settings. */ -#define STM32_TIMCAP_USE_TIM1 FALSE +#define STM32_TIMCAP_USE_TIM1 TRUE #define STM32_TIMCAP_USE_TIM2 FALSE -#define STM32_TIMCAP_USE_TIM3 FALSE -#define STM32_TIMCAP_USE_TIM4 FALSE -#define STM32_TIMCAP_USE_TIM5 FALSE -#define STM32_TIMCAP_USE_TIM8 FALSE -#define STM32_TIMCAP_USE_TIM9 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE #define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 #define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 #define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 @@ -83,3 +83,73 @@ #define STM32_DISABLE_EXTI30_32_HANDLER #define STM32_DISABLE_EXTI33_HANDLER #endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 + +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE + +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 + +/* + * QEI driver system settings. + */ +#define STM32_QEI_USE_TIM1 TRUE +#define STM32_QEI_USE_TIM2 FALSE +#define STM32_QEI_USE_TIM3 TRUE +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/STM32/STM32F3xx/EEProm/Makefile b/testhal/STM32/STM32F3xx/EEProm/Makefile index 90ada53..0e3d04d 100644 --- a/testhal/STM32/STM32F3xx/EEProm/Makefile +++ b/testhal/STM32/STM32F3xx/EEProm/Makefile @@ -69,7 +69,7 @@ ifeq ($(USE_EXCEPTIONS_STACKSIZE),) USE_EXCEPTIONS_STACKSIZE = 0x400
endif
-# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+# Enables the use of FPU (no, softfp, hard).
ifeq ($(USE_FPU),)
USE_FPU = no
endif
@@ -99,7 +99,9 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
# Other files (optional).
-#include $(CHIBIOS)/test/rt/test.mk
+#include $(CHIBIOS)/test/lib/test.mk
+#include $(CHIBIOS)/test/rt/rt_test.mk
+#include $(CHIBIOS)/test/oslib/oslib_test.mk
# Define linker script file here
LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld
@@ -147,7 +149,7 @@ ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) INCDIR = $(CHIBIOS)/os/license \
$(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
$(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(CHIBIOS)/os/various
+ $(CHIBIOS_CONTRIB)/os/various
#
# Project, sources and paths
diff --git a/testhal/STM32/STM32F3xx/EEProm/chconf.h b/testhal/STM32/STM32F3xx/EEProm/chconf.h index 894f737..53bd676 100644 --- a/testhal/STM32/STM32F3xx/EEProm/chconf.h +++ b/testhal/STM32/STM32F3xx/EEProm/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -52,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000
/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 32
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 32
+
+/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
@@ -141,7 +153,7 @@ *
* @note The default is @p TRUE.
*/
-#define CH_CFG_USE_TM TRUE
+#define CH_CFG_USE_TM FALSE
/**
* @brief Threads registry APIs.
@@ -296,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE
/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
@@ -310,6 +331,56 @@ /*===========================================================================*/
/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
* @name Debug options
* @{
*/
@@ -408,6 +479,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -416,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/STM32/STM32F3xx/EEProm/halconf.h b/testhal/STM32/STM32F3xx/EEProm/halconf.h index 3c5601e..0d74d67 100644 --- a/testhal/STM32/STM32F3xx/EEProm/halconf.h +++ b/testhal/STM32/STM32F3xx/EEProm/halconf.h @@ -1,387 +1,419 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C TRUE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI TRUE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
-#endif
-
-/*===========================================================================*/
-/* Community drivers's includes */
-/*===========================================================================*/
-
-#include "halconf_community.h"
-
-#endif /* HALCONF_H */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#include "halconf_community.h" + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/STM32/STM32F3xx/EEProm/halconf_community.h b/testhal/STM32/STM32F3xx/EEProm/halconf_community.h index f0814c6..75035b3 100644 --- a/testhal/STM32/STM32F3xx/EEProm/halconf_community.h +++ b/testhal/STM32/STM32F3xx/EEProm/halconf_community.h @@ -73,6 +73,41 @@ #define HAL_USE_EEPROM TRUE
#endif
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
+#endif
+
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
@@ -101,6 +136,24 @@ #define ONEWIRE_USE_SEARCH_ROM TRUE
/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
/* EEProm driver related settings. */
/*===========================================================================*/
@@ -108,8 +161,8 @@ * @brief Enables 24xx series I2C eeprom device driver.
* @note Disabling this option saves both code and data space.
*/
-#define EEPROM_USE_EE24XX TRUE
-/**
+#define EEPROM_USE_EE24XX FALSE
+ /**
* @brief Enables 25xx series SPI eeprom device driver.
* @note Disabling this option saves both code and data space.
*/
diff --git a/testhal/STM32/STM32F3xx/EEProm/main.c b/testhal/STM32/STM32F3xx/EEProm/main.c index 130a600..4460ef6 100644 --- a/testhal/STM32/STM32F3xx/EEProm/main.c +++ b/testhal/STM32/STM32F3xx/EEProm/main.c @@ -24,6 +24,7 @@ #define EEPROM_SPIDCONFIG spi1cfg
static const SPIConfig EEPROM_SPIDCONFIG = {
+ false,
NULL,
GPIOA,
12,
@@ -36,7 +37,7 @@ static SPIEepromFileConfig eeCfg = { EEPROM_SIZE,
EEPROM_SIZE,
EEPROM_PAGE_SIZE,
- MS2ST(EEPROM_WRITE_TIME_MS),
+ TIME_MS2I(EEPROM_WRITE_TIME_MS),
&EEPROM_SPID,
&EEPROM_SPIDCONFIG,
};
diff --git a/testhal/STM32/STM32F3xx/EEProm/mcuconf.h b/testhal/STM32/STM32F3xx/EEProm/mcuconf.h index badcd95..333f728 100644 --- a/testhal/STM32/STM32F3xx/EEProm/mcuconf.h +++ b/testhal/STM32/STM32F3xx/EEProm/mcuconf.h @@ -1,258 +1,255 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F3xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-#define STM32F3xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-#define STM32_HSI_ENABLED TRUE
-#define STM32_LSI_ENABLED TRUE
-#define STM32_HSE_ENABLED TRUE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSE
-#define STM32_PREDIV_VALUE 1
-#define STM32_PLLMUL_VALUE 9
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE1 STM32_PPRE1_DIV2
-#define STM32_PPRE2 STM32_PPRE2_DIV2
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
-#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
-#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
-#define STM32_USART1SW STM32_USART1SW_PCLK
-#define STM32_USART2SW STM32_USART2SW_PCLK
-#define STM32_USART3SW STM32_USART3SW_PCLK
-#define STM32_UART4SW STM32_UART4SW_PCLK
-#define STM32_UART5SW STM32_UART5SW_PCLK
-#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
-#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
-#define STM32_TIM1SW STM32_TIM1SW_PCLK2
-#define STM32_TIM8SW STM32_TIM8SW_PCLK2
-#define STM32_RTCSEL STM32_RTCSEL_LSI
-#define STM32_USB_CLOCK_REQUIRED TRUE
-#define STM32_USBPRE STM32_USBPRE_DIV1P5
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_DUAL_MODE FALSE
-#define STM32_ADC_COMPACT_SAMPLES FALSE
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_USE_ADC2 FALSE
-#define STM32_ADC_USE_ADC3 FALSE
-#define STM32_ADC_USE_ADC4 FALSE
-#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
-#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
-#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_ADC2_DMA_PRIORITY 2
-#define STM32_ADC_ADC3_DMA_PRIORITY 2
-#define STM32_ADC_ADC4_DMA_PRIORITY 2
-#define STM32_ADC_ADC12_IRQ_PRIORITY 5
-#define STM32_ADC_ADC3_IRQ_PRIORITY 5
-#define STM32_ADC_ADC4_IRQ_PRIORITY 5
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
-#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1 TRUE
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11
-
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE FALSE
-#define STM32_DAC_USE_DAC1_CH1 TRUE
-#define STM32_DAC_USE_DAC1_CH2 TRUE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI33_IRQ_PRIORITY 6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM4 FALSE
-#define STM32_GPT_USE_TIM6 FALSE
-#define STM32_GPT_USE_TIM7 FALSE
-#define STM32_GPT_USE_TIM8 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7
-#define STM32_GPT_TIM6_IRQ_PRIORITY 7
-#define STM32_GPT_TIM7_IRQ_PRIORITY 7
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 TRUE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_IRQ_PRIORITY 10
-#define STM32_I2C_I2C2_IRQ_PRIORITY 10
-#define STM32_I2C_USE_DMA TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY 1
-#define STM32_I2C_I2C2_DMA_PRIORITY 1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_USE_TIM4 FALSE
-#define STM32_ICU_USE_TIM8 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 FALSE
-#define STM32_PWM_USE_TIM4 FALSE
-#define STM32_PWM_USE_TIM8 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
-#define STM32_SERIAL_UART4_PRIORITY 12
-#define STM32_SERIAL_UART5_PRIORITY 12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 TRUE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_USE_SPI3 FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI3_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 8
-#define STM32_ST_USE_TIMER 2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USE_USART3 FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY 12
-#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_USART3_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1 FALSE
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG TRUE
-
-/*
- * header for community drivers.
- */
-#include "mcuconf_community.h"
-
-#endif /* MCUCONF_H */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F3xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F3xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 6 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 +#define STM32_IRQ_EXTI30_32_PRIORITY 6 +#define STM32_IRQ_EXTI33_PRIORITY 6 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE FALSE +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_USE_ADC2 TRUE +#define STM32_ADC_USE_ADC3 TRUE +#define STM32_ADC_USE_ADC4 TRUE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC4_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 TRUE +#define STM32_DAC_USE_DAC1_CH2 TRUE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#include "mcuconf_community.h" + +#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F3xx/EEProm/mcuconf_community.h b/testhal/STM32/STM32F3xx/EEProm/mcuconf_community.h index 7ca6e71..cf6a1ce 100644 --- a/testhal/STM32/STM32F3xx/EEProm/mcuconf_community.h +++ b/testhal/STM32/STM32F3xx/EEProm/mcuconf_community.h @@ -43,3 +43,113 @@ * FSMC SDRAM driver system settings. */ #define STM32_USE_FSMC_SDRAM FALSE + +/* + * TIMCAP driver system settings. + */ +#define STM32_TIMCAP_USE_TIM1 TRUE +#define STM32_TIMCAP_USE_TIM2 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE +#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 + +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 + +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 + +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE + +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 + +/* + * QEI driver system settings. + */ +#define STM32_QEI_USE_TIM1 TRUE +#define STM32_QEI_USE_TIM2 FALSE +#define STM32_QEI_USE_TIM3 TRUE +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/STM32/STM32F3xx/TIMCAP/Makefile b/testhal/STM32/STM32F3xx/TIMCAP/Makefile index 90ada53..b67e7f1 100644 --- a/testhal/STM32/STM32F3xx/TIMCAP/Makefile +++ b/testhal/STM32/STM32F3xx/TIMCAP/Makefile @@ -1,219 +1,221 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
- USE_LDOPT =
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
- USE_LTO = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-# If enabled, this option makes the build process faster by not compiling
-# modules not used in the current configuration.
-ifeq ($(USE_SMART_BUILD),)
- USE_SMART_BUILD = yes
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the Cortex-M process stack. This stack is
-# the stack used by the main() thread.
-ifeq ($(USE_PROCESS_STACKSIZE),)
- USE_PROCESS_STACKSIZE = 0x400
-endif
-
-# Stack size to the allocated to the Cortex-M main/exceptions stack. This
-# stack is used for processing interrupts and exceptions.
-ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
- USE_EXCEPTIONS_STACKSIZE = 0x400
-endif
-
-# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
-ifeq ($(USE_FPU),)
- USE_FPU = no
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../../../../../ChibiOS-RT
-CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
-# Startup files.
-include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
-include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F3xx/platform.mk
-include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk
-include $(CHIBIOS)/os/hal/osal/rt/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/rt/rt.mk
-include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
-# Other files (optional).
-#include $(CHIBIOS)/test/rt/test.mk
-
-# Define linker script file here
-LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(TESTSRC) \
- main.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC =
-ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m4
-
-#TRGT = arm-elf-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra -Wundef
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
-include $(RULESPATH)/rules.mk
+############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk +# HAL-OSAL files (optional). +include $(CHIBIOS_CONTRIB)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F3xx/platform.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). +#include $(CHIBIOS)/test/lib/test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS_CONTRIB)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F3xx/TIMCAP/chconf.h b/testhal/STM32/STM32F3xx/TIMCAP/chconf.h index 894f737..53bd676 100644 --- a/testhal/STM32/STM32F3xx/TIMCAP/chconf.h +++ b/testhal/STM32/STM32F3xx/TIMCAP/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -52,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000
/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 32
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 32
+
+/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
@@ -141,7 +153,7 @@ *
* @note The default is @p TRUE.
*/
-#define CH_CFG_USE_TM TRUE
+#define CH_CFG_USE_TM FALSE
/**
* @brief Threads registry APIs.
@@ -296,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE
/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
@@ -310,6 +331,56 @@ /*===========================================================================*/
/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
* @name Debug options
* @{
*/
@@ -408,6 +479,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -416,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/STM32/STM32F3xx/TIMCAP/halconf.h b/testhal/STM32/STM32F3xx/TIMCAP/halconf.h index 93cc713..95e89c1 100644 --- a/testhal/STM32/STM32F3xx/TIMCAP/halconf.h +++ b/testhal/STM32/STM32F3xx/TIMCAP/halconf.h @@ -1,387 +1,419 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
-#endif
-
-/*===========================================================================*/
-/* Community drivers's includes */
-/*===========================================================================*/
-
-#include "halconf_community.h"
-
-#endif /* HALCONF_H */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#include "halconf_community.h" + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/STM32/STM32F3xx/TIMCAP/halconf_community.h b/testhal/STM32/STM32F3xx/TIMCAP/halconf_community.h index 40070e6..dbd6deb 100644 --- a/testhal/STM32/STM32F3xx/TIMCAP/halconf_community.h +++ b/testhal/STM32/STM32F3xx/TIMCAP/halconf_community.h @@ -80,6 +80,34 @@ #define HAL_USE_TIMCAP TRUE
#endif
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
+#endif
+
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
@@ -108,6 +136,24 @@ #define ONEWIRE_USE_SEARCH_ROM TRUE
/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
/* EEProm driver related settings. */
/*===========================================================================*/
@@ -115,12 +161,12 @@ * @brief Enables 24xx series I2C eeprom device driver.
* @note Disabling this option saves both code and data space.
*/
-#define EEPROM_USE_EE24XX TRUE
+#define EEPROM_USE_EE24XX FALSE
/**
* @brief Enables 25xx series SPI eeprom device driver.
* @note Disabling this option saves both code and data space.
*/
-#define EEPROM_USE_EE25XX TRUE
+#define EEPROM_USE_EE25XX FALSE
#endif /* HALCONF_COMMUNITY_H */
diff --git a/testhal/STM32/STM32F3xx/TIMCAP/mcuconf.h b/testhal/STM32/STM32F3xx/TIMCAP/mcuconf.h index badcd95..79d83c2 100644 --- a/testhal/STM32/STM32F3xx/TIMCAP/mcuconf.h +++ b/testhal/STM32/STM32F3xx/TIMCAP/mcuconf.h @@ -1,258 +1,255 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F3xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-#define STM32F3xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-#define STM32_HSI_ENABLED TRUE
-#define STM32_LSI_ENABLED TRUE
-#define STM32_HSE_ENABLED TRUE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSE
-#define STM32_PREDIV_VALUE 1
-#define STM32_PLLMUL_VALUE 9
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE1 STM32_PPRE1_DIV2
-#define STM32_PPRE2 STM32_PPRE2_DIV2
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
-#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
-#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
-#define STM32_USART1SW STM32_USART1SW_PCLK
-#define STM32_USART2SW STM32_USART2SW_PCLK
-#define STM32_USART3SW STM32_USART3SW_PCLK
-#define STM32_UART4SW STM32_UART4SW_PCLK
-#define STM32_UART5SW STM32_UART5SW_PCLK
-#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
-#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
-#define STM32_TIM1SW STM32_TIM1SW_PCLK2
-#define STM32_TIM8SW STM32_TIM8SW_PCLK2
-#define STM32_RTCSEL STM32_RTCSEL_LSI
-#define STM32_USB_CLOCK_REQUIRED TRUE
-#define STM32_USBPRE STM32_USBPRE_DIV1P5
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_DUAL_MODE FALSE
-#define STM32_ADC_COMPACT_SAMPLES FALSE
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_USE_ADC2 FALSE
-#define STM32_ADC_USE_ADC3 FALSE
-#define STM32_ADC_USE_ADC4 FALSE
-#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
-#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
-#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_ADC2_DMA_PRIORITY 2
-#define STM32_ADC_ADC3_DMA_PRIORITY 2
-#define STM32_ADC_ADC4_DMA_PRIORITY 2
-#define STM32_ADC_ADC12_IRQ_PRIORITY 5
-#define STM32_ADC_ADC3_IRQ_PRIORITY 5
-#define STM32_ADC_ADC4_IRQ_PRIORITY 5
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
-#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
-#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1 TRUE
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11
-
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE FALSE
-#define STM32_DAC_USE_DAC1_CH1 TRUE
-#define STM32_DAC_USE_DAC1_CH2 TRUE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI33_IRQ_PRIORITY 6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM4 FALSE
-#define STM32_GPT_USE_TIM6 FALSE
-#define STM32_GPT_USE_TIM7 FALSE
-#define STM32_GPT_USE_TIM8 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7
-#define STM32_GPT_TIM6_IRQ_PRIORITY 7
-#define STM32_GPT_TIM7_IRQ_PRIORITY 7
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 TRUE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_IRQ_PRIORITY 10
-#define STM32_I2C_I2C2_IRQ_PRIORITY 10
-#define STM32_I2C_USE_DMA TRUE
-#define STM32_I2C_I2C1_DMA_PRIORITY 1
-#define STM32_I2C_I2C2_DMA_PRIORITY 1
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_USE_TIM4 FALSE
-#define STM32_ICU_USE_TIM8 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 FALSE
-#define STM32_PWM_USE_TIM4 FALSE
-#define STM32_PWM_USE_TIM8 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 FALSE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
-#define STM32_SERIAL_UART4_PRIORITY 12
-#define STM32_SERIAL_UART5_PRIORITY 12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 TRUE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_USE_SPI3 FALSE
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI3_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 8
-#define STM32_ST_USE_TIMER 2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USE_USART3 FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY 12
-#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_USART3_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1 FALSE
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
-#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG TRUE
-
-/*
- * header for community drivers.
- */
-#include "mcuconf_community.h"
-
-#endif /* MCUCONF_H */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F3xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F3xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 6 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 +#define STM32_IRQ_EXTI30_32_PRIORITY 6 +#define STM32_IRQ_EXTI33_PRIORITY 6 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE FALSE +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_USE_ADC2 TRUE +#define STM32_ADC_USE_ADC3 TRUE +#define STM32_ADC_USE_ADC4 TRUE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC4_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 TRUE +#define STM32_DAC_USE_DAC1_CH2 TRUE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#include "mcuconf_community.h" + +#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F3xx/TIMCAP/mcuconf_community.h b/testhal/STM32/STM32F3xx/TIMCAP/mcuconf_community.h index b115590..05c3698 100644 --- a/testhal/STM32/STM32F3xx/TIMCAP/mcuconf_community.h +++ b/testhal/STM32/STM32F3xx/TIMCAP/mcuconf_community.h @@ -62,4 +62,94 @@ #define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 #define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 - +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 + +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 + +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE + +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 + +/* + * QEI driver system settings. + */ +#define STM32_QEI_USE_TIM1 TRUE +#define STM32_QEI_USE_TIM2 FALSE +#define STM32_QEI_USE_TIM3 TRUE +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/STM32/STM32F4xx/EICU/Makefile b/testhal/STM32/STM32F4xx/EICU/Makefile index db59af2..c1eae62 100644 --- a/testhal/STM32/STM32F4xx/EICU/Makefile +++ b/testhal/STM32/STM32F4xx/EICU/Makefile @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -46,7 +46,7 @@ endif # If enabled, this option makes the build process faster by not compiling # modules not used in the current configuration. ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no + USE_SMART_BUILD = yes endif # @@ -98,9 +98,13 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk # RTOS files (optional). include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). +#include $(CHIBIOS)/test/lib/test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F407xG.ld +LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. @@ -144,8 +148,8 @@ ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) INCDIR = $(CHIBIOS)/os/license \ $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS_CONTRIB)/os/various # # Project, sources and paths @@ -184,7 +188,7 @@ TOPT = -mthumb -DTHUMB CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/STM32/STM32F4xx/EICU/chconf.h b/testhal/STM32/STM32F4xx/EICU/chconf.h index 736770d..53bd676 100644 --- a/testhal/STM32/STM32F4xx/EICU/chconf.h +++ b/testhal/STM32/STM32F4xx/EICU/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -52,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000
/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 32
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 32
+
+/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
@@ -141,7 +153,7 @@ *
* @note The default is @p TRUE.
*/
-#define CH_CFG_USE_TM TRUE
+#define CH_CFG_USE_TM FALSE
/**
* @brief Threads registry APIs.
@@ -296,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE
/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
@@ -310,6 +331,56 @@ /*===========================================================================*/
/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
* @name Debug options
* @{
*/
@@ -329,7 +400,7 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
/**
* @brief Debug option, parameters checks.
@@ -338,7 +409,7 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_CHECKS FALSE
+#define CH_DBG_ENABLE_CHECKS TRUE
/**
* @brief Debug option, consistency checks.
@@ -348,7 +419,7 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_ENABLE_ASSERTS FALSE
+#define CH_DBG_ENABLE_ASSERTS TRUE
/**
* @brief Debug option, trace buffer.
@@ -356,7 +427,7 @@ *
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
/**
* @brief Trace buffer entries.
@@ -375,7 +446,7 @@ * @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
/**
* @brief Debug option, stacks initialization.
@@ -385,7 +456,7 @@ *
* @note The default is @p FALSE.
*/
-#define CH_DBG_FILL_THREADS FALSE
+#define CH_DBG_FILL_THREADS TRUE
/**
* @brief Debug option, threads profiling.
@@ -408,6 +479,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -416,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
diff --git a/testhal/STM32/STM32F4xx/EICU/halconf.h b/testhal/STM32/STM32F4xx/EICU/halconf.h index 93cc713..95e89c1 100644 --- a/testhal/STM32/STM32F4xx/EICU/halconf.h +++ b/testhal/STM32/STM32F4xx/EICU/halconf.h @@ -1,387 +1,419 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
-#endif
-
-/*===========================================================================*/
-/* Community drivers's includes */
-/*===========================================================================*/
-
-#include "halconf_community.h"
-
-#endif /* HALCONF_H */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#include "halconf_community.h" + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/EICU/halconf_community.h b/testhal/STM32/STM32F4xx/EICU/halconf_community.h index 42c8c5d..f5cb75e 100644 --- a/testhal/STM32/STM32F4xx/EICU/halconf_community.h +++ b/testhal/STM32/STM32F4xx/EICU/halconf_community.h @@ -66,6 +66,48 @@ #define HAL_USE_RNG FALSE
#endif
+/**
+ * @brief Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
+#endif
+
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
@@ -91,7 +133,40 @@ * @brief Enables search ROM feature.
* @note Disabling this option saves both code and data space.
*/
-#define ONEWIRE_USE_SEARCH_ROM FALSE
+#define ONEWIRE_USE_SEARCH_ROM TRUE
+
+/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
+/* EEProm driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables 24xx series I2C eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief Enables 25xx series SPI eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
#endif /* HALCONF_COMMUNITY_H */
diff --git a/testhal/STM32/STM32F4xx/EICU/main.c b/testhal/STM32/STM32F4xx/EICU/main.c index 90f8eb1..a6dbf8a 100644 --- a/testhal/STM32/STM32F4xx/EICU/main.c +++ b/testhal/STM32/STM32F4xx/EICU/main.c @@ -35,10 +35,10 @@ typedef struct { /*
* Chose values suitable for measurement using 16-bit timer on 1MHz
*/
-static pulse_t pulse_led3 = {MS2ST(2), MS2ST(59), GPIOD_LED3};
-static pulse_t pulse_led4 = {MS2ST(3), MS2ST(53), GPIOD_LED4};
-static pulse_t pulse_led5 = {MS2ST(5), MS2ST(47), GPIOD_LED5};
-static pulse_t pulse_led6 = {MS2ST(7), MS2ST(43), GPIOD_LED6};
+static pulse_t pulse_led3 = {TIME_MS2I(2), TIME_MS2I(59), GPIOD_LED3};
+static pulse_t pulse_led4 = {TIME_MS2I(3), TIME_MS2I(53), GPIOD_LED4};
+static pulse_t pulse_led5 = {TIME_MS2I(5), TIME_MS2I(47), GPIOD_LED5};
+static pulse_t pulse_led6 = {TIME_MS2I(7), TIME_MS2I(43), GPIOD_LED6};
/*
*
@@ -72,19 +72,19 @@ void eicu_cb(EICUDriver *eicup, eicuchannel_t channel, uint32_t w, uint32_t p) { (void)p;
switch (channel) {
case EICU_CHANNEL_1:
- if (abs((int32_t)w - (int32_t)ST2US(pulse_led3.high)) > tolerance)
+ if (abs((int32_t)w - (int32_t)TIME_I2US(pulse_led3.high)) > tolerance)
osalSysHalt("ch1");
break;
case EICU_CHANNEL_2:
- if (abs((int32_t)w - (int32_t)ST2US(pulse_led4.high)) > tolerance)
+ if (abs((int32_t)w - (int32_t)TIME_I2US(pulse_led4.high)) > tolerance)
osalSysHalt("ch2");
break;
case EICU_CHANNEL_3:
- if (abs((int32_t)w - (int32_t)ST2US(pulse_led5.high)) > tolerance)
+ if (abs((int32_t)w - (int32_t)TIME_I2US(pulse_led5.high)) > tolerance)
osalSysHalt("ch3");
break;
case EICU_CHANNEL_4:
- if (abs((int32_t)w - (int32_t)ST2US(pulse_led6.high)) > tolerance)
+ if (abs((int32_t)w - (int32_t)TIME_I2US(pulse_led6.high)) > tolerance)
osalSysHalt("ch4");
break;
default:
diff --git a/testhal/STM32/STM32F4xx/EICU/mcuconf.h b/testhal/STM32/STM32F4xx/EICU/mcuconf.h index c7671b7..25c1357 100644 --- a/testhal/STM32/STM32F4xx/EICU/mcuconf.h +++ b/testhal/STM32/STM32F4xx/EICU/mcuconf.h @@ -1,347 +1,344 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F4xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-#define STM32F4xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_HSI_ENABLED TRUE
-#define STM32_LSI_ENABLED TRUE
-#define STM32_HSE_ENABLED TRUE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_CLOCK48_REQUIRED TRUE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSE
-#define STM32_PLLM_VALUE 8
-#define STM32_PLLN_VALUE 336
-#define STM32_PLLP_VALUE 2
-#define STM32_PLLQ_VALUE 7
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE1 STM32_PPRE1_DIV4
-#define STM32_PPRE2 STM32_PPRE2_DIV2
-#define STM32_RTCSEL STM32_RTCSEL_LSI
-#define STM32_RTCPRE_VALUE 8
-#define STM32_MCO1SEL STM32_MCO1SEL_HSI
-#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
-#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
-#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
-#define STM32_I2SSRC STM32_I2SSRC_CKIN
-#define STM32_PLLI2SN_VALUE 192
-#define STM32_PLLI2SR_VALUE 5
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-#define STM32_BKPRAM_ENABLE FALSE
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_USE_ADC2 FALSE
-#define STM32_ADC_USE_ADC3 FALSE
-#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
-#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
-#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_ADC2_DMA_PRIORITY 2
-#define STM32_ADC_ADC3_DMA_PRIORITY 2
-#define STM32_ADC_IRQ_PRIORITY 6
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
-#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6
-#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1 FALSE
-#define STM32_CAN_USE_CAN2 FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11
-#define STM32_CAN_CAN2_IRQ_PRIORITY 11
-
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE FALSE
-#define STM32_DAC_USE_DAC1_CH1 FALSE
-#define STM32_DAC_USE_DAC1_CH2 FALSE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
-#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
-#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 15
-#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI21_IRQ_PRIORITY 15
-#define STM32_EXT_EXTI22_IRQ_PRIORITY 15
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM4 FALSE
-#define STM32_GPT_USE_TIM5 FALSE
-#define STM32_GPT_USE_TIM6 FALSE
-#define STM32_GPT_USE_TIM7 FALSE
-#define STM32_GPT_USE_TIM8 FALSE
-#define STM32_GPT_USE_TIM9 FALSE
-#define STM32_GPT_USE_TIM11 FALSE
-#define STM32_GPT_USE_TIM12 FALSE
-#define STM32_GPT_USE_TIM14 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7
-#define STM32_GPT_TIM5_IRQ_PRIORITY 7
-#define STM32_GPT_TIM6_IRQ_PRIORITY 7
-#define STM32_GPT_TIM7_IRQ_PRIORITY 7
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7
-#define STM32_GPT_TIM9_IRQ_PRIORITY 7
-#define STM32_GPT_TIM11_IRQ_PRIORITY 7
-#define STM32_GPT_TIM12_IRQ_PRIORITY 7
-#define STM32_GPT_TIM14_IRQ_PRIORITY 7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 FALSE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_USE_I2C3 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2C_I2C1_IRQ_PRIORITY 5
-#define STM32_I2C_I2C2_IRQ_PRIORITY 5
-#define STM32_I2C_I2C3_IRQ_PRIORITY 5
-#define STM32_I2C_I2C1_DMA_PRIORITY 3
-#define STM32_I2C_I2C2_DMA_PRIORITY 3
-#define STM32_I2C_I2C3_DMA_PRIORITY 3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * I2S driver system settings.
- */
-#define STM32_I2S_USE_SPI2 FALSE
-#define STM32_I2S_USE_SPI3 FALSE
-#define STM32_I2S_SPI2_IRQ_PRIORITY 10
-#define STM32_I2S_SPI3_IRQ_PRIORITY 10
-#define STM32_I2S_SPI2_DMA_PRIORITY 1
-#define STM32_I2S_SPI3_DMA_PRIORITY 1
-#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
-#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_USE_TIM4 FALSE
-#define STM32_ICU_USE_TIM5 FALSE
-#define STM32_ICU_USE_TIM8 FALSE
-#define STM32_ICU_USE_TIM9 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7
-#define STM32_ICU_TIM5_IRQ_PRIORITY 7
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7
-#define STM32_ICU_TIM9_IRQ_PRIORITY 7
-
-/*
- * MAC driver system settings.
- */
-#define STM32_MAC_TRANSMIT_BUFFERS 2
-#define STM32_MAC_RECEIVE_BUFFERS 4
-#define STM32_MAC_BUFFERS_SIZE 1522
-#define STM32_MAC_PHY_TIMEOUT 100
-#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE
-#define STM32_MAC_ETH1_IRQ_PRIORITY 13
-#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 FALSE
-#define STM32_PWM_USE_TIM4 FALSE
-#define STM32_PWM_USE_TIM5 FALSE
-#define STM32_PWM_USE_TIM8 FALSE
-#define STM32_PWM_USE_TIM9 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7
-#define STM32_PWM_TIM5_IRQ_PRIORITY 7
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7
-#define STM32_PWM_TIM9_IRQ_PRIORITY 7
-
-/*
- * SDC driver system settings.
- */
-#define STM32_SDC_SDIO_DMA_PRIORITY 3
-#define STM32_SDC_SDIO_IRQ_PRIORITY 9
-#define STM32_SDC_WRITE_TIMEOUT_MS 250
-#define STM32_SDC_READ_TIMEOUT_MS 25
-#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10
-#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE
-#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 TRUE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USE_USART6 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
-#define STM32_SERIAL_UART4_PRIORITY 12
-#define STM32_SERIAL_UART5_PRIORITY 12
-#define STM32_SERIAL_USART6_PRIORITY 12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_USE_SPI3 FALSE
-#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
-#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
-#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
-#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI3_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 8
-#define STM32_ST_USE_TIMER 2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USE_USART3 FALSE
-#define STM32_UART_USE_UART4 FALSE
-#define STM32_UART_USE_UART5 FALSE
-#define STM32_UART_USE_USART6 FALSE
-#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
-#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
-#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
-#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
-#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
-#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART1_IRQ_PRIORITY 12
-#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
-#define STM32_UART_UART4_IRQ_PRIORITY 12
-#define STM32_UART_UART5_IRQ_PRIORITY 12
-#define STM32_UART_USART6_IRQ_PRIORITY 12
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_USART3_DMA_PRIORITY 0
-#define STM32_UART_UART4_DMA_PRIORITY 0
-#define STM32_UART_UART5_DMA_PRIORITY 0
-#define STM32_UART_USART6_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_OTG1 FALSE
-#define STM32_USB_USE_OTG2 FALSE
-#define STM32_USB_OTG1_IRQ_PRIORITY 14
-#define STM32_USB_OTG2_IRQ_PRIORITY 14
-#define STM32_USB_OTG1_RX_FIFO_SIZE 512
-#define STM32_USB_OTG2_RX_FIFO_SIZE 1024
-#define STM32_USB_OTG_THREAD_PRIO LOWPRIO
-#define STM32_USB_OTG_THREAD_STACK_SIZE 128
-#define STM32_USB_OTGFIFO_FILL_BASEPRI 0
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG FALSE
-
-/*
- * header for community drivers.
- */
-#include "mcuconf_community.h"
-
-#endif /* MCUCONF_H */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_USE_ADC2 TRUE +#define STM32_ADC_USE_ADC3 TRUE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 1000 +#define STM32_SDC_READ_TIMEOUT_MS 1000 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#include "mcuconf_community.h" + +#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F4xx/EICU/mcuconf_community.h b/testhal/STM32/STM32F4xx/EICU/mcuconf_community.h index 9d15f32..360b327 100644 --- a/testhal/STM32/STM32F4xx/EICU/mcuconf_community.h +++ b/testhal/STM32/STM32F4xx/EICU/mcuconf_community.h @@ -40,14 +40,81 @@ #define STM32_SRAM_USE_FSMC_SRAM4 FALSE /* - * FSMC PC card driver system settings. + * FSMC SDRAM driver system settings. */ -#define STM32_USE_FSMC_PCCARD FALSE +#define STM32_USE_FSMC_SDRAM FALSE /* - * FSMC SDRAM driver system settings. + * TIMCAP driver system settings. */ -#define STM32_USE_FSMC_SDRAM FALSE +#define STM32_TIMCAP_USE_TIM1 TRUE +#define STM32_TIMCAP_USE_TIM2 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE +#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 + +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 + +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 + +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE /* * EICU driver system settings. @@ -77,3 +144,12 @@ #define STM32_EICU_TIM13_IRQ_PRIORITY 7 #define STM32_EICU_TIM14_IRQ_PRIORITY 7 +/* + * QEI driver system settings. + */ +#define STM32_QEI_USE_TIM1 TRUE +#define STM32_QEI_USE_TIM2 FALSE +#define STM32_QEI_USE_TIM3 TRUE +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/STM32/STM32F4xx/FSMC_NAND/Makefile b/testhal/STM32/STM32F4xx/FSMC_NAND/Makefile index 6ad8126..5996f17 100644 --- a/testhal/STM32/STM32F4xx/FSMC_NAND/Makefile +++ b/testhal/STM32/STM32F4xx/FSMC_NAND/Makefile @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -46,7 +46,7 @@ endif # If enabled, this option makes the build process faster by not compiling # modules not used in the current configuration. ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no + USE_SMART_BUILD = yes endif # @@ -98,9 +98,13 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk # RTOS files (optional). include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). +#include $(CHIBIOS)/test/lib/test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F407xG.ld +LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. @@ -149,7 +153,6 @@ ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) INCDIR = $(CHIBIOS)/os/license \ $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various \ $(CHIBIOS_CONTRIB)/os/various # @@ -189,7 +192,7 @@ TOPT = -mthumb -DTHUMB CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/STM32/STM32F4xx/FSMC_NAND/chconf.h b/testhal/STM32/STM32F4xx/FSMC_NAND/chconf.h index cf950cd..1843208 100644 --- a/testhal/STM32/STM32F4xx/FSMC_NAND/chconf.h +++ b/testhal/STM32/STM32F4xx/FSMC_NAND/chconf.h @@ -1,521 +1,608 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ +/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_5_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 10000
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 32
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 32
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM TRUE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS TRUE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS TRUE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS TRUE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_spi.c b/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_spi.c index 3c60484..7f02c11 100644 --- a/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_spi.c +++ b/testhal/STM32/STM32F4xx/FSMC_NAND/dma_storm_spi.c @@ -49,6 +49,7 @@ static const uint8_t testbuf_flash[SPI_BUF_SIZE]; * */ static const SPIConfig spicfg = { + false, spi_end_cb, GPIOA, GPIOA_SPI1_NSS, diff --git a/testhal/STM32/STM32F4xx/FSMC_NAND/halconf.h b/testhal/STM32/STM32F4xx/FSMC_NAND/halconf.h index dbc1950..18a6ec7 100644 --- a/testhal/STM32/STM32F4xx/FSMC_NAND/halconf.h +++ b/testhal/STM32/STM32F4xx/FSMC_NAND/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -52,6 +52,13 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** * @brief Enables the DAC subsystem. */ #if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) @@ -115,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -202,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -376,10 +412,6 @@ #define USB_USE_WAIT FALSE #endif -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - #include "halconf_community.h" #endif /* HALCONF_H */ diff --git a/testhal/STM32/STM32F4xx/FSMC_NAND/halconf_community.h b/testhal/STM32/STM32F4xx/FSMC_NAND/halconf_community.h index acbf837..20fd46c 100644 --- a/testhal/STM32/STM32F4xx/FSMC_NAND/halconf_community.h +++ b/testhal/STM32/STM32F4xx/FSMC_NAND/halconf_community.h @@ -66,6 +66,48 @@ #define HAL_USE_RNG FALSE
#endif
+/**
+ * @brief Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
+#endif
+
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
@@ -93,6 +135,39 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
+/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
+/* EEProm driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables 24xx series I2C eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief Enables 25xx series SPI eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
+
#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf.h b/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf.h index d2333ba..14f1daf 100644 --- a/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf.h +++ b/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -65,16 +65,34 @@ #define STM32_BKPRAM_ENABLE FALSE /* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* * ADC driver system settings. */ #define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 #define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_USE_ADC2 TRUE +#define STM32_ADC_USE_ADC3 TRUE #define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) #define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 3 +#define STM32_ADC_ADC1_DMA_PRIORITY 2 #define STM32_ADC_ADC2_DMA_PRIORITY 2 #define STM32_ADC_ADC3_DMA_PRIORITY 2 #define STM32_ADC_IRQ_PRIORITY 6 @@ -104,24 +122,6 @@ #define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) /* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* * GPT driver system settings. */ #define STM32_GPT_USE_TIM1 FALSE @@ -238,8 +238,8 @@ */ #define STM32_SDC_SDIO_DMA_PRIORITY 3 #define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_WRITE_TIMEOUT_MS 1000 +#define STM32_SDC_READ_TIMEOUT_MS 1000 #define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 #define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE #define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) @@ -252,7 +252,7 @@ #define STM32_SERIAL_USE_USART3 FALSE #define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USE_USART6 TRUE #define STM32_SERIAL_USART1_PRIORITY 12 #define STM32_SERIAL_USART2_PRIORITY 12 #define STM32_SERIAL_USART3_PRIORITY 12 @@ -305,20 +305,20 @@ #define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) #define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) #define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) #define STM32_UART_USART1_IRQ_PRIORITY 12 #define STM32_UART_USART2_IRQ_PRIORITY 12 #define STM32_UART_USART3_IRQ_PRIORITY 12 #define STM32_UART_UART4_IRQ_PRIORITY 12 #define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 6 +#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART3_DMA_PRIORITY 0 #define STM32_UART_UART4_DMA_PRIORITY 0 #define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 2 +#define STM32_UART_USART6_DMA_PRIORITY 0 #define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") /* @@ -339,9 +339,6 @@ */ #define STM32_WDG_USE_IWDG FALSE -/* - * header for community drivers. - */ #include "mcuconf_community.h" #endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf_community.h b/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf_community.h index be64b51..eb72c0a 100644 --- a/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf_community.h +++ b/testhal/STM32/STM32F4xx/FSMC_NAND/mcuconf_community.h @@ -26,10 +26,10 @@ */ #define STM32_NAND_USE_FSMC_NAND1 TRUE #define STM32_NAND_USE_FSMC_NAND2 FALSE +#define STM32_NAND_USE_EXT_INT FALSE #define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) #define STM32_NAND_DMA_PRIORITY 0 #define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") -#define STM32_NAND_BUS_WIDTH 8 /* * FSMC SRAM driver system settings. @@ -41,6 +41,116 @@ #define STM32_SRAM_USE_FSMC_SRAM4 FALSE /* - * FSMC PC card driver system settings. + * FSMC SDRAM driver system settings. */ -#define STM32_USE_FSMC_PCCARD FALSE +#define STM32_USE_FSMC_SDRAM FALSE + +/* + * TIMCAP driver system settings. + */ +#define STM32_TIMCAP_USE_TIM1 TRUE +#define STM32_TIMCAP_USE_TIM2 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE +#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 + +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 + +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 + +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE + +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 + +/* + * QEI driver system settings. + */ +#define STM32_QEI_USE_TIM1 TRUE +#define STM32_QEI_USE_TIM2 FALSE +#define STM32_QEI_USE_TIM3 TRUE +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/STM32/STM32F4xx/FSMC_SDRAM/Makefile b/testhal/STM32/STM32F4xx/FSMC_SDRAM/Makefile index c786de6..efdd3e9 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SDRAM/Makefile +++ b/testhal/STM32/STM32F4xx/FSMC_SDRAM/Makefile @@ -15,7 +15,7 @@ endif # C++ specific options here (added to USE_OPT). ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -std=c++11 + USE_CPPOPT = -fno-rtti endif # Enable this if you want the linker to remove unused code and data @@ -46,7 +46,7 @@ endif # If enabled, this option makes the build process faster by not compiling # modules not used in the current configuration. ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no + USE_SMART_BUILD = yes endif # @@ -100,9 +100,12 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). include $(CHIBIOS)/os/various/cpp_wrappers/chcpp.mk +#include $(CHIBIOS)/test/lib/test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F429xI.ld +LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. @@ -115,8 +118,8 @@ CSRC = $(STARTUPSRC) \ $(BOARDSRC) \ $(TESTSRC) \ main.c \ - memcpy_dma.c \ - membench.c + membench.c \ + memcpy_dma.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. @@ -151,7 +154,6 @@ INCDIR = $(CHIBIOS)/os/license \ $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ $(CHIBIOS)/os/various/cpp_wrappers \ - $(CHIBIOS)/os/various \ $(CHIBIOS_CONTRIB)/os/various # @@ -191,7 +193,7 @@ TOPT = -mthumb -DTHUMB CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/STM32/STM32F4xx/FSMC_SDRAM/chconf.h b/testhal/STM32/STM32F4xx/FSMC_SDRAM/chconf.h index cf950cd..1843208 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SDRAM/chconf.h +++ b/testhal/STM32/STM32F4xx/FSMC_SDRAM/chconf.h @@ -1,521 +1,608 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ +/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_5_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 10000
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 32
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 32
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM TRUE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS TRUE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS TRUE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS TRUE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf.h b/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf.h index e690d15..18a6ec7 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf.h +++ b/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -52,6 +52,13 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** * @brief Enables the DAC subsystem. */ #if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) @@ -62,7 +69,7 @@ * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE +#define HAL_USE_EXT FALSE #endif /** @@ -115,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -202,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -376,10 +412,6 @@ #define USB_USE_WAIT FALSE #endif -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - #include "halconf_community.h" #endif /* HALCONF_H */ diff --git a/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h b/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h index 060481a..da9c607 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h +++ b/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h @@ -66,6 +66,48 @@ #define HAL_USE_RNG FALSE
#endif
+/**
+ * @brief Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
+#endif
+
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
@@ -93,6 +135,39 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
+/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
+/* EEProm driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables 24xx series I2C eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief Enables 25xx series SPI eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
+
#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf.h b/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf.h index 4737002..1948492 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf.h +++ b/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -65,6 +65,24 @@ #define STM32_BKPRAM_ENABLE FALSE /* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* * ADC driver system settings. */ #define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 @@ -104,24 +122,6 @@ #define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) /* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* * GPT driver system settings. */ #define STM32_GPT_USE_TIM1 FALSE @@ -238,8 +238,8 @@ */ #define STM32_SDC_SDIO_DMA_PRIORITY 3 #define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_WRITE_TIMEOUT_MS 1000 +#define STM32_SDC_READ_TIMEOUT_MS 1000 #define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 #define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE #define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) @@ -252,7 +252,7 @@ #define STM32_SERIAL_USE_USART3 FALSE #define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USE_USART6 TRUE #define STM32_SERIAL_USART1_PRIORITY 12 #define STM32_SERIAL_USART2_PRIORITY 12 #define STM32_SERIAL_USART3_PRIORITY 12 @@ -305,20 +305,20 @@ #define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) #define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) #define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) #define STM32_UART_USART1_IRQ_PRIORITY 12 #define STM32_UART_USART2_IRQ_PRIORITY 12 #define STM32_UART_USART3_IRQ_PRIORITY 12 #define STM32_UART_UART4_IRQ_PRIORITY 12 #define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 6 +#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART3_DMA_PRIORITY 0 #define STM32_UART_UART4_DMA_PRIORITY 0 #define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 2 +#define STM32_UART_USART6_DMA_PRIORITY 0 #define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") /* @@ -339,9 +339,6 @@ */ #define STM32_WDG_USE_IWDG FALSE -/* - * header for community drivers. - */ #include "mcuconf_community.h" #endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf_community.h b/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf_community.h index f60cbee..2b0e91a 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf_community.h +++ b/testhal/STM32/STM32F4xx/FSMC_SDRAM/mcuconf_community.h @@ -19,12 +19,26 @@ */ #define STM32_FSMC_USE_FSMC1 TRUE #define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 +#define STM32_FSMC_DMA_CHN 0x03010201 /* * FSMC NAND driver system settings. */ #define STM32_NAND_USE_FSMC_NAND1 FALSE #define STM32_NAND_USE_FSMC_NAND2 FALSE +#define STM32_NAND_USE_EXT_INT FALSE +#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_NAND_DMA_PRIORITY 0 +#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") + +/* + * FSMC SRAM driver system settings. + */ +#define STM32_USE_FSMC_SRAM FALSE +#define STM32_SRAM_USE_FSMC_SRAM1 FALSE +#define STM32_SRAM_USE_FSMC_SRAM2 FALSE +#define STM32_SRAM_USE_FSMC_SRAM3 FALSE +#define STM32_SRAM_USE_FSMC_SRAM4 FALSE /* * FSMC SDRAM driver system settings. @@ -34,15 +48,111 @@ #define STM32_SDRAM_USE_FSMC_SDRAM2 TRUE /* - * FSMC SRAM driver system settings. + * TIMCAP driver system settings. */ -#define STM32_USE_FSMC_SRAM FALSE -#define STM32_SRAM_USE_FSMC_SRAM1 FALSE -#define STM32_SRAM_USE_FSMC_SRAM2 FALSE -#define STM32_SRAM_USE_FSMC_SRAM3 FALSE -#define STM32_SRAM_USE_FSMC_SRAM4 FALSE +#define STM32_TIMCAP_USE_TIM1 TRUE +#define STM32_TIMCAP_USE_TIM2 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE +#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 + +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 + +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 + +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE + +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 /* - * FSMC PC card driver system settings. + * QEI driver system settings. */ -#define STM32_USE_FSMC_PCCARD FALSE +#define STM32_QEI_USE_TIM1 TRUE +#define STM32_QEI_USE_TIM2 FALSE +#define STM32_QEI_USE_TIM3 TRUE +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/STM32/STM32F4xx/FSMC_SRAM/Makefile b/testhal/STM32/STM32F4xx/FSMC_SRAM/Makefile index c0db393..28e3d68 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SRAM/Makefile +++ b/testhal/STM32/STM32F4xx/FSMC_SRAM/Makefile @@ -10,12 +10,12 @@ endif # C specific options here (added to USE_OPT). ifeq ($(USE_COPT),) - USE_COPT = + USE_COPT = endif # C++ specific options here (added to USE_OPT). ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -std=c++11 + USE_CPPOPT = -fno-rtti endif # Enable this if you want the linker to remove unused code and data @@ -46,7 +46,7 @@ endif # If enabled, this option makes the build process faster by not compiling # modules not used in the current configuration. ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no + USE_SMART_BUILD = yes endif # @@ -100,9 +100,12 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). include $(CHIBIOS)/os/various/cpp_wrappers/chcpp.mk +#include $(CHIBIOS)/test/lib/test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F407xG.ld +LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. @@ -151,7 +154,6 @@ INCDIR = $(CHIBIOS)/os/license \ $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ $(CHIBIOS)/os/various/cpp_wrappers \ - $(CHIBIOS)/os/various \ $(CHIBIOS_CONTRIB)/os/various # @@ -191,7 +193,7 @@ TOPT = -mthumb -DTHUMB CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/STM32/STM32F4xx/FSMC_SRAM/chconf.h b/testhal/STM32/STM32F4xx/FSMC_SRAM/chconf.h index cf950cd..1843208 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SRAM/chconf.h +++ b/testhal/STM32/STM32F4xx/FSMC_SRAM/chconf.h @@ -1,521 +1,608 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ +/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_5_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 10000
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 32
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 32
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM TRUE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS TRUE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS TRUE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS TRUE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf.h b/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf.h index e690d15..18a6ec7 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf.h +++ b/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -52,6 +52,13 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** * @brief Enables the DAC subsystem. */ #if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) @@ -62,7 +69,7 @@ * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE +#define HAL_USE_EXT FALSE #endif /** @@ -115,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -202,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -376,10 +412,6 @@ #define USB_USE_WAIT FALSE #endif -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - #include "halconf_community.h" #endif /* HALCONF_H */ diff --git a/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h b/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h index 060481a..da9c607 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h +++ b/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h @@ -66,6 +66,48 @@ #define HAL_USE_RNG FALSE
#endif
+/**
+ * @brief Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
+#endif
+
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
@@ -93,6 +135,39 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
+/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
+/* EEProm driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables 24xx series I2C eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief Enables 25xx series SPI eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
+
#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf.h b/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf.h index d2333ba..14f1daf 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf.h +++ b/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -65,16 +65,34 @@ #define STM32_BKPRAM_ENABLE FALSE /* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* * ADC driver system settings. */ #define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 #define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_USE_ADC2 TRUE +#define STM32_ADC_USE_ADC3 TRUE #define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) #define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 3 +#define STM32_ADC_ADC1_DMA_PRIORITY 2 #define STM32_ADC_ADC2_DMA_PRIORITY 2 #define STM32_ADC_ADC3_DMA_PRIORITY 2 #define STM32_ADC_IRQ_PRIORITY 6 @@ -104,24 +122,6 @@ #define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) /* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* * GPT driver system settings. */ #define STM32_GPT_USE_TIM1 FALSE @@ -238,8 +238,8 @@ */ #define STM32_SDC_SDIO_DMA_PRIORITY 3 #define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_WRITE_TIMEOUT_MS 1000 +#define STM32_SDC_READ_TIMEOUT_MS 1000 #define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 #define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE #define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) @@ -252,7 +252,7 @@ #define STM32_SERIAL_USE_USART3 FALSE #define STM32_SERIAL_USE_UART4 FALSE #define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USE_USART6 TRUE #define STM32_SERIAL_USART1_PRIORITY 12 #define STM32_SERIAL_USART2_PRIORITY 12 #define STM32_SERIAL_USART3_PRIORITY 12 @@ -305,20 +305,20 @@ #define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) #define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) #define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) #define STM32_UART_USART1_IRQ_PRIORITY 12 #define STM32_UART_USART2_IRQ_PRIORITY 12 #define STM32_UART_USART3_IRQ_PRIORITY 12 #define STM32_UART_UART4_IRQ_PRIORITY 12 #define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 6 +#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART3_DMA_PRIORITY 0 #define STM32_UART_UART4_DMA_PRIORITY 0 #define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 2 +#define STM32_UART_USART6_DMA_PRIORITY 0 #define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") /* @@ -339,9 +339,6 @@ */ #define STM32_WDG_USE_IWDG FALSE -/* - * header for community drivers. - */ #include "mcuconf_community.h" #endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf_community.h b/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf_community.h index c439a31..caf079b 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf_community.h +++ b/testhal/STM32/STM32F4xx/FSMC_SRAM/mcuconf_community.h @@ -41,11 +41,116 @@ #define STM32_SRAM_USE_FSMC_SRAM4 TRUE /* - * FSMC PC card driver system settings. + * FSMC SDRAM driver system settings. */ -#define STM32_USE_FSMC_PCCARD FALSE +#define STM32_USE_FSMC_SDRAM FALSE /* - * FSMC SDRAM driver system settings. + * TIMCAP driver system settings. */ -#define STM32_USE_FSMC_SDRAM FALSE +#define STM32_TIMCAP_USE_TIM1 TRUE +#define STM32_TIMCAP_USE_TIM2 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE +#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 + +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 + +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 + +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE + +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 + +/* + * QEI driver system settings. + */ +#define STM32_QEI_USE_TIM1 TRUE +#define STM32_QEI_USE_TIM2 FALSE +#define STM32_QEI_USE_TIM3 TRUE +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/STM32/STM32F4xx/USB_HOST/Makefile b/testhal/STM32/STM32F4xx/USB_HOST/Makefile index dfda9ac..a29150e 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/Makefile +++ b/testhal/STM32/STM32F4xx/USB_HOST/Makefile @@ -5,12 +5,12 @@ # Compiler options here.
ifeq ($(USE_OPT),)
- USE_OPT = -Os -ggdb -fomit-frame-pointer -falign-functions=16
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
ifeq ($(USE_COPT),)
- USE_COPT =
+ USE_COPT =
endif
# C++ specific options here (added to USE_OPT).
@@ -25,7 +25,7 @@ endif # Linker extra options here.
ifeq ($(USE_LDOPT),)
- USE_LDOPT =
+ USE_LDOPT =
endif
# Enable this if you want link time optimizations (LTO)
@@ -60,13 +60,13 @@ endif # Stack size to be allocated to the Cortex-M process stack. This stack is
# the stack used by the main() thread.
ifeq ($(USE_PROCESS_STACKSIZE),)
- USE_PROCESS_STACKSIZE = 0x800
+ USE_PROCESS_STACKSIZE = 0x400
endif
# Stack size to the allocated to the Cortex-M main/exceptions stack. This
# stack is used for processing interrupts and exceptions.
ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
- USE_EXCEPTIONS_STACKSIZE = 0x800
+ USE_EXCEPTIONS_STACKSIZE = 0x400
endif
# Enables the use of FPU (no, softfp, hard).
@@ -99,7 +99,9 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
# Other files (optional).
-include $(CHIBIOS)/test/rt/test.mk
+include $(CHIBIOS)/test/lib/test.mk
+include $(CHIBIOS)/test/rt/rt_test.mk
+include $(CHIBIOS)/test/oslib/oslib_test.mk
include $(CHIBIOS)/os/hal/lib/streams/streams.mk
include $(CHIBIOS)/os/various/shell/shell.mk
include $(CHIBIOS_CONTRIB)/os/various/fatfs_bindings/fatfs.mk
@@ -116,7 +118,7 @@ CSRC = $(STARTUPSRC) \ $(HALSRC) \
$(PLATFORMSRC) \
$(BOARDSRC) \
- $(TESTSRC) \
+ $(TESTSRC) \
$(FATFSSRC) \
$(STREAMSSRC) \
$(SHELLSRC) \
@@ -154,7 +156,7 @@ INCDIR = $(CHIBIOS)/os/license \ $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
$(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
$(STREAMSINC) $(SHELLINC) $(FATFSINC) \
- $(CHIBIOS)/os/various
+ $(CHIBIOS_CONTRIB)/os/various
#
# Project, sources and paths
diff --git a/testhal/STM32/STM32F4xx/USB_HOST/chconf.h b/testhal/STM32/STM32F4xx/USB_HOST/chconf.h index e112daf..53bd676 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/chconf.h +++ b/testhal/STM32/STM32F4xx/USB_HOST/chconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -49,7 +49,19 @@ * @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
-#define CH_CFG_ST_FREQUENCY 1000
+#define CH_CFG_ST_FREQUENCY 10000
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 32
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 32
/**
* @brief Time delta constant for the tick-less mode.
@@ -59,7 +71,7 @@ * The value one is not valid, timeouts are rounded up to
* this value.
*/
-#define CH_CFG_ST_TIMEDELTA 0
+#define CH_CFG_ST_TIMEDELTA 2
/** @} */
@@ -141,7 +153,7 @@ *
* @note The default is @p TRUE.
*/
-#define CH_CFG_USE_TM TRUE
+#define CH_CFG_USE_TM FALSE
/**
* @brief Threads registry APIs.
@@ -296,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE
/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
@@ -310,6 +331,56 @@ /*===========================================================================*/
/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
* @name Debug options
* @{
*/
@@ -356,7 +427,7 @@ *
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
/**
* @brief Trace buffer entries.
@@ -408,6 +479,22 @@ /*===========================================================================*/
/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
@@ -416,9 +503,9 @@ /**
* @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
+ * @details User initialization code added to the @p _thread_init() function.
*
- * @note It is invoked from within @p chThdInit() and implicitly from all
+ * @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
@@ -499,8 +586,6 @@ */
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
- void usbDbgSystemHalted(void); \
- usbDbgSystemHalted(); \
}
/**
diff --git a/testhal/STM32/STM32F4xx/USB_HOST/ffconf.h b/testhal/STM32/STM32F4xx/USB_HOST/ffconf.h new file mode 100644 index 0000000..944ffde --- /dev/null +++ b/testhal/STM32/STM32F4xx/USB_HOST/ffconf.h @@ -0,0 +1,272 @@ +/* CHIBIOS FIX */
+#include "ch.h"
+
+/*---------------------------------------------------------------------------/
+/ FatFs - Configuration file
+/---------------------------------------------------------------------------*/
+
+#define FFCONF_DEF 87030 /* Revision ID */
+
+/*---------------------------------------------------------------------------/
+/ Function Configurations
+/---------------------------------------------------------------------------*/
+
+#define FF_FS_READONLY 0
+/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)
+/ Read-only configuration removes writing API functions, f_write(), f_sync(),
+/ f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree()
+/ and optional writing functions as well. */
+
+
+#define FF_FS_MINIMIZE 0
+/* This option defines minimization level to remove some basic API functions.
+/
+/ 0: All basic functions are enabled.
+/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename()
+/ are removed.
+/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
+/ 3: f_lseek() function is removed in addition to 2. */
+
+
+#define FF_USE_STRFUNC 0
+/* This option switches string functions, f_gets(), f_putc(), f_puts() and f_printf().
+/
+/ 0: Disable string functions.
+/ 1: Enable without LF-CRLF conversion.
+/ 2: Enable with LF-CRLF conversion. */
+
+
+#define FF_USE_FIND 0
+/* This option switches filtered directory read functions, f_findfirst() and
+/ f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */
+
+
+#define FF_USE_MKFS 0
+/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */
+
+
+#define FF_USE_FASTSEEK 0
+/* This option switches fast seek function. (0:Disable or 1:Enable) */
+
+
+#define FF_USE_EXPAND 0
+/* This option switches f_expand function. (0:Disable or 1:Enable) */
+
+
+#define FF_USE_CHMOD 0
+/* This option switches attribute manipulation functions, f_chmod() and f_utime().
+/ (0:Disable or 1:Enable) Also FF_FS_READONLY needs to be 0 to enable this option. */
+
+
+#define FF_USE_LABEL 0
+/* This option switches volume label functions, f_getlabel() and f_setlabel().
+/ (0:Disable or 1:Enable) */
+
+
+#define FF_USE_FORWARD 0
+/* This option switches f_forward() function. (0:Disable or 1:Enable) */
+
+
+/*---------------------------------------------------------------------------/
+/ Locale and Namespace Configurations
+/---------------------------------------------------------------------------*/
+
+#define FF_CODE_PAGE 850
+/* This option specifies the OEM code page to be used on the target system.
+/ Incorrect code page setting can cause a file open failure.
+/
+/ 437 - U.S.
+/ 720 - Arabic
+/ 737 - Greek
+/ 771 - KBL
+/ 775 - Baltic
+/ 850 - Latin 1
+/ 852 - Latin 2
+/ 855 - Cyrillic
+/ 857 - Turkish
+/ 860 - Portuguese
+/ 861 - Icelandic
+/ 862 - Hebrew
+/ 863 - Canadian French
+/ 864 - Arabic
+/ 865 - Nordic
+/ 866 - Russian
+/ 869 - Greek 2
+/ 932 - Japanese (DBCS)
+/ 936 - Simplified Chinese (DBCS)
+/ 949 - Korean (DBCS)
+/ 950 - Traditional Chinese (DBCS)
+/ 0 - Include all code pages above and configured by f_setcp()
+*/
+
+
+#define FF_USE_LFN 3
+#define FF_MAX_LFN 255
+/* The FF_USE_LFN switches the support for LFN (long file name).
+/
+/ 0: Disable LFN. FF_MAX_LFN has no effect.
+/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
+/ 2: Enable LFN with dynamic working buffer on the STACK.
+/ 3: Enable LFN with dynamic working buffer on the HEAP.
+/
+/ To enable the LFN, Unicode handling functions (option/unicode.c) must be added
+/ to the project. The working buffer occupies (FF_MAX_LFN + 1) * 2 bytes and
+/ additional 608 bytes at exFAT enabled. FF_MAX_LFN can be in range from 12 to 255.
+/ It should be set 255 to support full featured LFN operations.
+/ When use stack for the working buffer, take care on stack overflow. When use heap
+/ memory for the working buffer, memory management functions, ff_memalloc() and
+/ ff_memfree(), must be added to the project. */
+
+
+#define FF_LFN_UNICODE 0
+/* This option switches character encoding on the API, 0:ANSI/OEM or 1:UTF-16,
+/ when LFN is enabled. Also behavior of string I/O functions will be affected by
+/ this option. When LFN is not enabled, this option has no effect.
+*/
+
+
+#define FF_STRF_ENCODE 3
+/* When FF_LFN_UNICODE = 1 with LFN enabled, string I/O functions, f_gets(),
+/ f_putc(), f_puts and f_printf() convert the character encoding in it.
+/ This option selects assumption of character encoding ON THE FILE to be
+/ read/written via those functions.
+/
+/ 0: ANSI/OEM
+/ 1: UTF-16LE
+/ 2: UTF-16BE
+/ 3: UTF-8
+*/
+
+
+#define FF_FS_RPATH 0
+/* This option configures support for relative path.
+/
+/ 0: Disable relative path and remove related functions.
+/ 1: Enable relative path. f_chdir() and f_chdrive() are available.
+/ 2: f_getcwd() function is available in addition to 1.
+*/
+
+
+/*---------------------------------------------------------------------------/
+/ Drive/Volume Configurations
+/---------------------------------------------------------------------------*/
+
+#define FF_VOLUMES 1
+/* Number of volumes (logical drives) to be used. (1-10) */
+
+
+#define FF_STR_VOLUME_ID 0
+#define FF_VOLUME_STRS "RAM","NAND","CF","SD","SD2","USB","USB2","USB3"
+/* FF_STR_VOLUME_ID switches string support for volume ID.
+/ When FF_STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
+/ number in the path name. FF_VOLUME_STRS defines the drive ID strings for each
+/ logical drives. Number of items must be equal to FF_VOLUMES. Valid characters for
+/ the drive ID strings are: A-Z and 0-9. */
+
+
+#define FF_MULTI_PARTITION 0
+/* This option switches support for multiple volumes on the physical drive.
+/ By default (0), each logical drive number is bound to the same physical drive
+/ number and only an FAT volume found on the physical drive will be mounted.
+/ When this function is enabled (1), each logical drive number can be bound to
+/ arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk()
+/ funciton will be available. */
+
+
+#define FF_MIN_SS 512
+#define FF_MAX_SS 512
+/* This set of options configures the range of sector size to be supported. (512,
+/ 1024, 2048 or 4096) Always set both 512 for most systems, generic memory card and
+/ harddisk. But a larger value may be required for on-board flash memory and some
+/ type of optical media. When FF_MAX_SS is larger than FF_MIN_SS, FatFs is configured
+/ for variable sector size mode and disk_ioctl() function needs to implement
+/ GET_SECTOR_SIZE command. */
+
+
+#define FF_USE_TRIM 0
+/* This option switches support for ATA-TRIM. (0:Disable or 1:Enable)
+/ To enable Trim function, also CTRL_TRIM command should be implemented to the
+/ disk_ioctl() function. */
+
+
+#define FF_FS_NOFSINFO 0
+/* If you need to know correct free space on the FAT32 volume, set bit 0 of this
+/ option, and f_getfree() function at first time after volume mount will force
+/ a full FAT scan. Bit 1 controls the use of last allocated cluster number.
+/
+/ bit0=0: Use free cluster count in the FSINFO if available.
+/ bit0=1: Do not trust free cluster count in the FSINFO.
+/ bit1=0: Use last allocated cluster number in the FSINFO if available.
+/ bit1=1: Do not trust last allocated cluster number in the FSINFO.
+*/
+
+
+
+/*---------------------------------------------------------------------------/
+/ System Configurations
+/---------------------------------------------------------------------------*/
+
+#define FF_FS_TINY 0
+/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
+/ At the tiny configuration, size of file object (FIL) is shrinked FF_MAX_SS bytes.
+/ Instead of private sector buffer eliminated from the file object, common sector
+/ buffer in the filesystem object (FATFS) is used for the file data transfer. */
+
+
+#define FF_FS_EXFAT 1
+/* This option switches support for exFAT filesystem. (0:Disable or 1:Enable)
+/ When enable exFAT, also LFN needs to be enabled.
+/ Note that enabling exFAT discards ANSI C (C89) compatibility. */
+
+
+#define FF_FS_NORTC 1
+#define FF_NORTC_MON 5
+#define FF_NORTC_MDAY 1
+#define FF_NORTC_YEAR 2017
+/* The option FF_FS_NORTC switches timestamp functiton. If the system does not have
+/ any RTC function or valid timestamp is not needed, set FF_FS_NORTC = 1 to disable
+/ the timestamp function. All objects modified by FatFs will have a fixed timestamp
+/ defined by FF_NORTC_MON, FF_NORTC_MDAY and FF_NORTC_YEAR in local time.
+/ To enable timestamp function (FF_FS_NORTC = 0), get_fattime() function need to be
+/ added to the project to read current time form real-time clock. FF_NORTC_MON,
+/ FF_NORTC_MDAY and FF_NORTC_YEAR have no effect.
+/ These options have no effect at read-only configuration (FF_FS_READONLY = 1). */
+
+
+#define FF_FS_LOCK 0
+/* The option FF_FS_LOCK switches file lock function to control duplicated file open
+/ and illegal operation to open objects. This option must be 0 when FF_FS_READONLY
+/ is 1.
+/
+/ 0: Disable file lock function. To avoid volume corruption, application program
+/ should avoid illegal open, remove and rename to the open objects.
+/ >0: Enable file lock function. The value defines how many files/sub-directories
+/ can be opened simultaneously under file lock control. Note that the file
+/ lock control is independent of re-entrancy. */
+
+
+#define FF_FS_REENTRANT 0
+#define FF_FS_TIMEOUT MS2ST(1000)
+#define FF_SYNC_t semaphore_t*
+/* The option FF_FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs
+/ module itself. Note that regardless of this option, file access to different
+/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
+/ and f_fdisk() function, are always not re-entrant. Only file/directory access
+/ to the same volume is under control of this function.
+/
+/ 0: Disable re-entrancy. FF_FS_TIMEOUT and FF_SYNC_t have no effect.
+/ 1: Enable re-entrancy. Also user provided synchronization handlers,
+/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
+/ function, must be added to the project. Samples are available in
+/ option/syscall.c.
+/
+/ The FF_FS_TIMEOUT defines timeout period in unit of time tick.
+/ The FF_SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
+/ SemaphoreHandle_t and etc. A header file for O/S definitions needs to be
+/ included somewhere in the scope of ff.h. */
+
+/* #include <windows.h> // O/S definitions */
+
+
+
+/*--- End of configuration options ---*/
diff --git a/testhal/STM32/STM32F4xx/USB_HOST/halconf.h b/testhal/STM32/STM32F4xx/USB_HOST/halconf.h index 9ddbb1b..33f3f94 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/halconf.h +++ b/testhal/STM32/STM32F4xx/USB_HOST/halconf.h @@ -1,387 +1,419 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL TRUE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 115200
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 64
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
-#endif
-
-/*===========================================================================*/
-/* Community drivers's includes */
-/*===========================================================================*/
-
-#include "halconf_community.h"
-
-#endif /* HALCONF_H */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#include "halconf_community.h" + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/USB_HOST/halconf_community.h b/testhal/STM32/STM32F4xx/USB_HOST/halconf_community.h index 9b22a79..55c8f4e 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/halconf_community.h +++ b/testhal/STM32/STM32F4xx/USB_HOST/halconf_community.h @@ -67,6 +67,13 @@ #endif
/**
+ * @brief Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM FALSE
+#endif
+
+/**
* @brief Enables the TIMCAP subsystem.
*/
#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
@@ -74,12 +81,92 @@ #endif
/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
* @brief Enables the USBH subsystem.
*/
#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
-#define HAL_USE_USBH TRUE
+#define HAL_USE_USBH TRUE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
+#endif
+
+/*===========================================================================*/
+/* FSMCNAND driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define NAND_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* 1-wire driver related settings. */
+/*===========================================================================*/
+/**
+ * @brief Enables strong pull up feature.
+ * @note Disabling this option saves both code and data space.
+ */
+#define ONEWIRE_USE_STRONG_PULLUP FALSE
+
+/**
+ * @brief Enables search ROM feature.
+ * @note Disabling this option saves both code and data space.
+ */
+#define ONEWIRE_USE_SEARCH_ROM TRUE
+
+/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
#endif
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
+/* EEProm driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables 24xx series I2C eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief Enables 25xx series SPI eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
/*===========================================================================*/
/* USBH driver related settings. */
@@ -89,7 +176,7 @@ #define HAL_USBH_PORT_DEBOUNCE_TIME 200
#define HAL_USBH_PORT_RESET_TIMEOUT 500
#define HAL_USBH_DEVICE_ADDRESS_STABILIZATION 20
-#define HAL_USBH_CONTROL_REQUEST_DEFAULT_TIMEOUT MS2ST(1000)
+#define HAL_USBH_CONTROL_REQUEST_DEFAULT_TIMEOUT OSAL_MS2I(1000)
/* MSD */
#define HAL_USBH_USE_MSD TRUE
@@ -190,33 +277,6 @@ #define USBHHID_DEBUG_ENABLE_WARNINGS TRUE
#define USBHHID_DEBUG_ENABLE_ERRORS TRUE
-/*===========================================================================*/
-/* FSMCNAND driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define NAND_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* 1-wire driver related settings. */
-/*===========================================================================*/
-/**
- * @brief Enables strong pull up feature.
- * @note Disabling this option saves both code and data space.
- */
-#define ONEWIRE_USE_STRONG_PULLUP FALSE
-
-/**
- * @brief Enables search ROM feature.
- * @note Disabling this option saves both code and data space.
- */
-#define ONEWIRE_USE_SEARCH_ROM TRUE
-
#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F4xx/USB_HOST/mcuconf.h b/testhal/STM32/STM32F4xx/USB_HOST/mcuconf.h index c7671b7..65258ff 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/mcuconf.h +++ b/testhal/STM32/STM32F4xx/USB_HOST/mcuconf.h @@ -1,347 +1,344 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F4xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-#define STM32F4xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_HSI_ENABLED TRUE
-#define STM32_LSI_ENABLED TRUE
-#define STM32_HSE_ENABLED TRUE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_CLOCK48_REQUIRED TRUE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSE
-#define STM32_PLLM_VALUE 8
-#define STM32_PLLN_VALUE 336
-#define STM32_PLLP_VALUE 2
-#define STM32_PLLQ_VALUE 7
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE1 STM32_PPRE1_DIV4
-#define STM32_PPRE2 STM32_PPRE2_DIV2
-#define STM32_RTCSEL STM32_RTCSEL_LSI
-#define STM32_RTCPRE_VALUE 8
-#define STM32_MCO1SEL STM32_MCO1SEL_HSI
-#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
-#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
-#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
-#define STM32_I2SSRC STM32_I2SSRC_CKIN
-#define STM32_PLLI2SN_VALUE 192
-#define STM32_PLLI2SR_VALUE 5
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-#define STM32_BKPRAM_ENABLE FALSE
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_USE_ADC2 FALSE
-#define STM32_ADC_USE_ADC3 FALSE
-#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
-#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
-#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_ADC2_DMA_PRIORITY 2
-#define STM32_ADC_ADC3_DMA_PRIORITY 2
-#define STM32_ADC_IRQ_PRIORITY 6
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
-#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6
-#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1 FALSE
-#define STM32_CAN_USE_CAN2 FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11
-#define STM32_CAN_CAN2_IRQ_PRIORITY 11
-
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE FALSE
-#define STM32_DAC_USE_DAC1_CH1 FALSE
-#define STM32_DAC_USE_DAC1_CH2 FALSE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
-#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
-#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 15
-#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI21_IRQ_PRIORITY 15
-#define STM32_EXT_EXTI22_IRQ_PRIORITY 15
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM4 FALSE
-#define STM32_GPT_USE_TIM5 FALSE
-#define STM32_GPT_USE_TIM6 FALSE
-#define STM32_GPT_USE_TIM7 FALSE
-#define STM32_GPT_USE_TIM8 FALSE
-#define STM32_GPT_USE_TIM9 FALSE
-#define STM32_GPT_USE_TIM11 FALSE
-#define STM32_GPT_USE_TIM12 FALSE
-#define STM32_GPT_USE_TIM14 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7
-#define STM32_GPT_TIM5_IRQ_PRIORITY 7
-#define STM32_GPT_TIM6_IRQ_PRIORITY 7
-#define STM32_GPT_TIM7_IRQ_PRIORITY 7
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7
-#define STM32_GPT_TIM9_IRQ_PRIORITY 7
-#define STM32_GPT_TIM11_IRQ_PRIORITY 7
-#define STM32_GPT_TIM12_IRQ_PRIORITY 7
-#define STM32_GPT_TIM14_IRQ_PRIORITY 7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 FALSE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_USE_I2C3 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2C_I2C1_IRQ_PRIORITY 5
-#define STM32_I2C_I2C2_IRQ_PRIORITY 5
-#define STM32_I2C_I2C3_IRQ_PRIORITY 5
-#define STM32_I2C_I2C1_DMA_PRIORITY 3
-#define STM32_I2C_I2C2_DMA_PRIORITY 3
-#define STM32_I2C_I2C3_DMA_PRIORITY 3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * I2S driver system settings.
- */
-#define STM32_I2S_USE_SPI2 FALSE
-#define STM32_I2S_USE_SPI3 FALSE
-#define STM32_I2S_SPI2_IRQ_PRIORITY 10
-#define STM32_I2S_SPI3_IRQ_PRIORITY 10
-#define STM32_I2S_SPI2_DMA_PRIORITY 1
-#define STM32_I2S_SPI3_DMA_PRIORITY 1
-#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
-#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_USE_TIM4 FALSE
-#define STM32_ICU_USE_TIM5 FALSE
-#define STM32_ICU_USE_TIM8 FALSE
-#define STM32_ICU_USE_TIM9 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7
-#define STM32_ICU_TIM5_IRQ_PRIORITY 7
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7
-#define STM32_ICU_TIM9_IRQ_PRIORITY 7
-
-/*
- * MAC driver system settings.
- */
-#define STM32_MAC_TRANSMIT_BUFFERS 2
-#define STM32_MAC_RECEIVE_BUFFERS 4
-#define STM32_MAC_BUFFERS_SIZE 1522
-#define STM32_MAC_PHY_TIMEOUT 100
-#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE
-#define STM32_MAC_ETH1_IRQ_PRIORITY 13
-#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 FALSE
-#define STM32_PWM_USE_TIM4 FALSE
-#define STM32_PWM_USE_TIM5 FALSE
-#define STM32_PWM_USE_TIM8 FALSE
-#define STM32_PWM_USE_TIM9 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7
-#define STM32_PWM_TIM5_IRQ_PRIORITY 7
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7
-#define STM32_PWM_TIM9_IRQ_PRIORITY 7
-
-/*
- * SDC driver system settings.
- */
-#define STM32_SDC_SDIO_DMA_PRIORITY 3
-#define STM32_SDC_SDIO_IRQ_PRIORITY 9
-#define STM32_SDC_WRITE_TIMEOUT_MS 250
-#define STM32_SDC_READ_TIMEOUT_MS 25
-#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10
-#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE
-#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 TRUE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USE_USART6 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
-#define STM32_SERIAL_UART4_PRIORITY 12
-#define STM32_SERIAL_UART5_PRIORITY 12
-#define STM32_SERIAL_USART6_PRIORITY 12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_USE_SPI3 FALSE
-#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
-#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
-#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
-#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI3_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 8
-#define STM32_ST_USE_TIMER 2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USE_USART3 FALSE
-#define STM32_UART_USE_UART4 FALSE
-#define STM32_UART_USE_UART5 FALSE
-#define STM32_UART_USE_USART6 FALSE
-#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
-#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
-#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
-#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
-#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
-#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART1_IRQ_PRIORITY 12
-#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
-#define STM32_UART_UART4_IRQ_PRIORITY 12
-#define STM32_UART_UART5_IRQ_PRIORITY 12
-#define STM32_UART_USART6_IRQ_PRIORITY 12
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_USART3_DMA_PRIORITY 0
-#define STM32_UART_UART4_DMA_PRIORITY 0
-#define STM32_UART_UART5_DMA_PRIORITY 0
-#define STM32_UART_USART6_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_OTG1 FALSE
-#define STM32_USB_USE_OTG2 FALSE
-#define STM32_USB_OTG1_IRQ_PRIORITY 14
-#define STM32_USB_OTG2_IRQ_PRIORITY 14
-#define STM32_USB_OTG1_RX_FIFO_SIZE 512
-#define STM32_USB_OTG2_RX_FIFO_SIZE 1024
-#define STM32_USB_OTG_THREAD_PRIO LOWPRIO
-#define STM32_USB_OTG_THREAD_STACK_SIZE 128
-#define STM32_USB_OTGFIFO_FILL_BASEPRI 0
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG FALSE
-
-/*
- * header for community drivers.
- */
-#include "mcuconf_community.h"
-
-#endif /* MCUCONF_H */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_USE_ADC2 TRUE +#define STM32_ADC_USE_ADC3 TRUE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 1000 +#define STM32_SDC_READ_TIMEOUT_MS 1000 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#include "mcuconf_community.h" + +#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F4xx/USB_HOST/mcuconf_community.h b/testhal/STM32/STM32F4xx/USB_HOST/mcuconf_community.h index 5cb823a..cf6a1ce 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/mcuconf_community.h +++ b/testhal/STM32/STM32F4xx/USB_HOST/mcuconf_community.h @@ -44,6 +44,45 @@ */ #define STM32_USE_FSMC_SDRAM FALSE +/* + * TIMCAP driver system settings. + */ +#define STM32_TIMCAP_USE_TIM1 TRUE +#define STM32_TIMCAP_USE_TIM2 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE +#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 + +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 + +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif /* * USBH driver system settings. @@ -64,3 +103,53 @@ #define STM32_USBH_MIN_QSPACE 4 #define STM32_USBH_CHANNELS_NP 4 +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE + +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 + +/* + * QEI driver system settings. + */ +#define STM32_QEI_USE_TIM1 TRUE +#define STM32_QEI_USE_TIM2 FALSE +#define STM32_QEI_USE_TIM3 TRUE +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/STM32/STM32F4xx/onewire/Makefile b/testhal/STM32/STM32F4xx/onewire/Makefile index 092b023..17b1f31 100644 --- a/testhal/STM32/STM32F4xx/onewire/Makefile +++ b/testhal/STM32/STM32F4xx/onewire/Makefile @@ -30,7 +30,7 @@ endif # Enable this if you want link time optimizations (LTO) ifeq ($(USE_LTO),) - USE_LTO = no + USE_LTO = yes endif # If enabled, this option allows to compile the application in THUMB mode. @@ -46,7 +46,7 @@ endif # If enabled, this option makes the build process faster by not compiling # modules not used in the current configuration. ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no + USE_SMART_BUILD = yes endif # @@ -99,9 +99,13 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk # RTOS files (optional). include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). +#include $(CHIBIOS)/test/lib/test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F407xG.ld +LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. @@ -115,7 +119,7 @@ CSRC = $(STARTUPSRC) \ $(TESTSRC) \ main.c \ $(TESTHAL)/testhal_onewire.c - + # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. CPPSRC = @@ -147,7 +151,7 @@ ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) INCDIR = $(CHIBIOS)/os/license \ $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various \ + $(CHIBIOS_CONTRIB)/os/various \ $(TESTHAL) # @@ -187,7 +191,7 @@ TOPT = -mthumb -DTHUMB CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings @@ -218,4 +222,3 @@ ULIBS = RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC include $(RULESPATH)/rules.mk - diff --git a/testhal/STM32/STM32F4xx/onewire/chconf.h b/testhal/STM32/STM32F4xx/onewire/chconf.h index cf950cd..53bd676 100644 --- a/testhal/STM32/STM32F4xx/onewire/chconf.h +++ b/testhal/STM32/STM32F4xx/onewire/chconf.h @@ -1,521 +1,608 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ +/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_5_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 10000
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#define CH_CFG_INTERVALS_SIZE 32
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_TIME_TYPES_SIZE 32
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_CFG_USE_FACTORY TRUE
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS TRUE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS TRUE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS TRUE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/testhal/STM32/STM32F4xx/onewire/halconf.h b/testhal/STM32/STM32F4xx/onewire/halconf.h index 64811a5..9449b94 100644 --- a/testhal/STM32/STM32F4xx/onewire/halconf.h +++ b/testhal/STM32/STM32F4xx/onewire/halconf.h @@ -1,387 +1,419 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM TRUE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
-#endif
-
-/*===========================================================================*/
-/* Community drivers's includes */
-/*===========================================================================*/
-
-#include "halconf_community.h"
-
-#endif /* HALCONF_H */
-
-/** @} */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#include "halconf_community.h" + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/onewire/halconf_community.h b/testhal/STM32/STM32F4xx/onewire/halconf_community.h index 0621fdb..df56d7e 100644 --- a/testhal/STM32/STM32F4xx/onewire/halconf_community.h +++ b/testhal/STM32/STM32F4xx/onewire/halconf_community.h @@ -66,6 +66,48 @@ #define HAL_USE_RNG FALSE
#endif
+/**
+ * @brief Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD FALSE
+#endif
+
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
@@ -93,6 +135,39 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
+/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
+/* EEProm driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables 24xx series I2C eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief Enables 25xx series SPI eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
+
#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F4xx/onewire/mcuconf.h b/testhal/STM32/STM32F4xx/onewire/mcuconf.h index 2111433..c1c1138 100644 --- a/testhal/STM32/STM32F4xx/onewire/mcuconf.h +++ b/testhal/STM32/STM32F4xx/onewire/mcuconf.h @@ -1,347 +1,344 @@ -/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F4xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0 Lowest...Highest.
- *
- * DMA priorities:
- * 0...3 Lowest...Highest.
- */
-
-#define STM32F4xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT FALSE
-#define STM32_HSI_ENABLED TRUE
-#define STM32_LSI_ENABLED TRUE
-#define STM32_HSE_ENABLED TRUE
-#define STM32_LSE_ENABLED FALSE
-#define STM32_CLOCK48_REQUIRED TRUE
-#define STM32_SW STM32_SW_PLL
-#define STM32_PLLSRC STM32_PLLSRC_HSE
-#define STM32_PLLM_VALUE 8
-#define STM32_PLLN_VALUE 336
-#define STM32_PLLP_VALUE 2
-#define STM32_PLLQ_VALUE 7
-#define STM32_HPRE STM32_HPRE_DIV1
-#define STM32_PPRE1 STM32_PPRE1_DIV4
-#define STM32_PPRE2 STM32_PPRE2_DIV2
-#define STM32_RTCSEL STM32_RTCSEL_LSI
-#define STM32_RTCPRE_VALUE 8
-#define STM32_MCO1SEL STM32_MCO1SEL_HSI
-#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
-#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
-#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
-#define STM32_I2SSRC STM32_I2SSRC_CKIN
-#define STM32_PLLI2SN_VALUE 192
-#define STM32_PLLI2SR_VALUE 5
-#define STM32_PVD_ENABLE FALSE
-#define STM32_PLS STM32_PLS_LEV0
-#define STM32_BKPRAM_ENABLE FALSE
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
-#define STM32_ADC_USE_ADC1 FALSE
-#define STM32_ADC_USE_ADC2 FALSE
-#define STM32_ADC_USE_ADC3 FALSE
-#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
-#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
-#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
-#define STM32_ADC_ADC1_DMA_PRIORITY 2
-#define STM32_ADC_ADC2_DMA_PRIORITY 2
-#define STM32_ADC_ADC3_DMA_PRIORITY 2
-#define STM32_ADC_IRQ_PRIORITY 6
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
-#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6
-#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1 FALSE
-#define STM32_CAN_USE_CAN2 FALSE
-#define STM32_CAN_CAN1_IRQ_PRIORITY 11
-#define STM32_CAN_CAN2_IRQ_PRIORITY 11
-
-/*
- * DAC driver system settings.
- */
-#define STM32_DAC_DUAL_MODE FALSE
-#define STM32_DAC_USE_DAC1_CH1 FALSE
-#define STM32_DAC_USE_DAC1_CH2 FALSE
-#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
-#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
-#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
-#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
-#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 15
-#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
-#define STM32_EXT_EXTI21_IRQ_PRIORITY 15
-#define STM32_EXT_EXTI22_IRQ_PRIORITY 15
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1 FALSE
-#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM4 FALSE
-#define STM32_GPT_USE_TIM5 FALSE
-#define STM32_GPT_USE_TIM6 FALSE
-#define STM32_GPT_USE_TIM7 FALSE
-#define STM32_GPT_USE_TIM8 FALSE
-#define STM32_GPT_USE_TIM9 FALSE
-#define STM32_GPT_USE_TIM11 FALSE
-#define STM32_GPT_USE_TIM12 FALSE
-#define STM32_GPT_USE_TIM14 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY 7
-#define STM32_GPT_TIM2_IRQ_PRIORITY 7
-#define STM32_GPT_TIM3_IRQ_PRIORITY 7
-#define STM32_GPT_TIM4_IRQ_PRIORITY 7
-#define STM32_GPT_TIM5_IRQ_PRIORITY 7
-#define STM32_GPT_TIM6_IRQ_PRIORITY 7
-#define STM32_GPT_TIM7_IRQ_PRIORITY 7
-#define STM32_GPT_TIM8_IRQ_PRIORITY 7
-#define STM32_GPT_TIM9_IRQ_PRIORITY 7
-#define STM32_GPT_TIM11_IRQ_PRIORITY 7
-#define STM32_GPT_TIM12_IRQ_PRIORITY 7
-#define STM32_GPT_TIM14_IRQ_PRIORITY 7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1 FALSE
-#define STM32_I2C_USE_I2C2 FALSE
-#define STM32_I2C_USE_I2C3 FALSE
-#define STM32_I2C_BUSY_TIMEOUT 50
-#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2C_I2C1_IRQ_PRIORITY 5
-#define STM32_I2C_I2C2_IRQ_PRIORITY 5
-#define STM32_I2C_I2C3_IRQ_PRIORITY 5
-#define STM32_I2C_I2C1_DMA_PRIORITY 3
-#define STM32_I2C_I2C2_DMA_PRIORITY 3
-#define STM32_I2C_I2C3_DMA_PRIORITY 3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
-
-/*
- * I2S driver system settings.
- */
-#define STM32_I2S_USE_SPI2 FALSE
-#define STM32_I2S_USE_SPI3 FALSE
-#define STM32_I2S_SPI2_IRQ_PRIORITY 10
-#define STM32_I2S_SPI3_IRQ_PRIORITY 10
-#define STM32_I2S_SPI2_DMA_PRIORITY 1
-#define STM32_I2S_SPI3_DMA_PRIORITY 1
-#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
-#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1 FALSE
-#define STM32_ICU_USE_TIM2 FALSE
-#define STM32_ICU_USE_TIM3 FALSE
-#define STM32_ICU_USE_TIM4 FALSE
-#define STM32_ICU_USE_TIM5 FALSE
-#define STM32_ICU_USE_TIM8 FALSE
-#define STM32_ICU_USE_TIM9 FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY 7
-#define STM32_ICU_TIM2_IRQ_PRIORITY 7
-#define STM32_ICU_TIM3_IRQ_PRIORITY 7
-#define STM32_ICU_TIM4_IRQ_PRIORITY 7
-#define STM32_ICU_TIM5_IRQ_PRIORITY 7
-#define STM32_ICU_TIM8_IRQ_PRIORITY 7
-#define STM32_ICU_TIM9_IRQ_PRIORITY 7
-
-/*
- * MAC driver system settings.
- */
-#define STM32_MAC_TRANSMIT_BUFFERS 2
-#define STM32_MAC_RECEIVE_BUFFERS 4
-#define STM32_MAC_BUFFERS_SIZE 1522
-#define STM32_MAC_PHY_TIMEOUT 100
-#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE
-#define STM32_MAC_ETH1_IRQ_PRIORITY 13
-#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED FALSE
-#define STM32_PWM_USE_TIM1 FALSE
-#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 TRUE
-#define STM32_PWM_USE_TIM4 FALSE
-#define STM32_PWM_USE_TIM5 FALSE
-#define STM32_PWM_USE_TIM8 FALSE
-#define STM32_PWM_USE_TIM9 FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY 7
-#define STM32_PWM_TIM2_IRQ_PRIORITY 7
-#define STM32_PWM_TIM3_IRQ_PRIORITY 7
-#define STM32_PWM_TIM4_IRQ_PRIORITY 7
-#define STM32_PWM_TIM5_IRQ_PRIORITY 7
-#define STM32_PWM_TIM8_IRQ_PRIORITY 7
-#define STM32_PWM_TIM9_IRQ_PRIORITY 7
-
-/*
- * SDC driver system settings.
- */
-#define STM32_SDC_SDIO_DMA_PRIORITY 3
-#define STM32_SDC_SDIO_IRQ_PRIORITY 9
-#define STM32_SDC_WRITE_TIMEOUT_MS 250
-#define STM32_SDC_READ_TIMEOUT_MS 25
-#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10
-#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE
-#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 TRUE
-#define STM32_SERIAL_USE_USART3 FALSE
-#define STM32_SERIAL_USE_UART4 FALSE
-#define STM32_SERIAL_USE_UART5 FALSE
-#define STM32_SERIAL_USE_USART6 FALSE
-#define STM32_SERIAL_USART1_PRIORITY 12
-#define STM32_SERIAL_USART2_PRIORITY 12
-#define STM32_SERIAL_USART3_PRIORITY 12
-#define STM32_SERIAL_UART4_PRIORITY 12
-#define STM32_SERIAL_UART5_PRIORITY 12
-#define STM32_SERIAL_USART6_PRIORITY 12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 FALSE
-#define STM32_SPI_USE_SPI3 FALSE
-#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
-#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
-#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
-#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#define STM32_SPI_SPI1_DMA_PRIORITY 1
-#define STM32_SPI_SPI2_DMA_PRIORITY 1
-#define STM32_SPI_SPI3_DMA_PRIORITY 1
-#define STM32_SPI_SPI1_IRQ_PRIORITY 10
-#define STM32_SPI_SPI2_IRQ_PRIORITY 10
-#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY 8
-#define STM32_ST_USE_TIMER 2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1 FALSE
-#define STM32_UART_USE_USART2 FALSE
-#define STM32_UART_USE_USART3 FALSE
-#define STM32_UART_USE_UART4 FALSE
-#define STM32_UART_USE_UART5 FALSE
-#define STM32_UART_USE_USART6 FALSE
-#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
-#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
-#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
-#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
-#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
-#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
-#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
-#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART1_IRQ_PRIORITY 12
-#define STM32_UART_USART2_IRQ_PRIORITY 12
-#define STM32_UART_USART3_IRQ_PRIORITY 12
-#define STM32_UART_UART4_IRQ_PRIORITY 12
-#define STM32_UART_UART5_IRQ_PRIORITY 12
-#define STM32_UART_USART6_IRQ_PRIORITY 12
-#define STM32_UART_USART1_DMA_PRIORITY 0
-#define STM32_UART_USART2_DMA_PRIORITY 0
-#define STM32_UART_USART3_DMA_PRIORITY 0
-#define STM32_UART_UART4_DMA_PRIORITY 0
-#define STM32_UART_UART5_DMA_PRIORITY 0
-#define STM32_UART_USART6_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_OTG1 FALSE
-#define STM32_USB_USE_OTG2 FALSE
-#define STM32_USB_OTG1_IRQ_PRIORITY 14
-#define STM32_USB_OTG2_IRQ_PRIORITY 14
-#define STM32_USB_OTG1_RX_FIFO_SIZE 512
-#define STM32_USB_OTG2_RX_FIFO_SIZE 1024
-#define STM32_USB_OTG_THREAD_PRIO LOWPRIO
-#define STM32_USB_OTG_THREAD_STACK_SIZE 128
-#define STM32_USB_OTGFIFO_FILL_BASEPRI 0
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG FALSE
-
-/*
- * header for community drivers.
- */
-#include "mcuconf_community.h"
-
-#endif /* MCUCONF_H */
+/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_USE_ADC2 TRUE +#define STM32_ADC_USE_ADC3 TRUE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 1000 +#define STM32_SDC_READ_TIMEOUT_MS 1000 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#include "mcuconf_community.h" + +#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F4xx/onewire/mcuconf_community.h b/testhal/STM32/STM32F4xx/onewire/mcuconf_community.h index 7ca6e71..cf6a1ce 100644 --- a/testhal/STM32/STM32F4xx/onewire/mcuconf_community.h +++ b/testhal/STM32/STM32F4xx/onewire/mcuconf_community.h @@ -43,3 +43,113 @@ * FSMC SDRAM driver system settings. */ #define STM32_USE_FSMC_SDRAM FALSE + +/* + * TIMCAP driver system settings. + */ +#define STM32_TIMCAP_USE_TIM1 TRUE +#define STM32_TIMCAP_USE_TIM2 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE +#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 + +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 + +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 + +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE + +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 + +/* + * QEI driver system settings. + */ +#define STM32_QEI_USE_TIM1 TRUE +#define STM32_QEI_USE_TIM2 FALSE +#define STM32_QEI_USE_TIM3 TRUE +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/STM32/STM32F7xx/USB_MSD/Makefile b/testhal/STM32/STM32F7xx/USB_MSD/Makefile index 8f4695f..10ec19f 100644 --- a/testhal/STM32/STM32F7xx/USB_MSD/Makefile +++ b/testhal/STM32/STM32F7xx/USB_MSD/Makefile @@ -5,12 +5,12 @@ # Compiler options here. ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 + USE_OPT = -Os -ggdb -fomit-frame-pointer -falign-functions=16 endif # C specific options here (added to USE_OPT). ifeq ($(USE_COPT),) - USE_COPT = + USE_COPT = endif # C++ specific options here (added to USE_OPT). @@ -93,19 +93,20 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib - # Startup files. include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f7xx.mk # HAL-OSAL files (optional). include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F7xx/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F7xx/platform.mk include $(CHIBIOS)/os/hal/boards/ST_NUCLEO144_F767ZI/board.mk include $(CHIBIOS)/os/hal/osal/rt/osal.mk # RTOS files (optional). include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). -include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/test/lib/test.mk +include $(CHIBIOS)/test/rt/rt_test.mk +include $(CHIBIOS)/test/oslib/oslib_test.mk include $(CHIBIOS)/os/hal/lib/streams/streams.mk include $(CHIBIOS)/os/various/shell/shell.mk diff --git a/testhal/STM32/STM32F7xx/USB_MSD/chconf.h b/testhal/STM32/STM32F7xx/USB_MSD/chconf.h index 346c876..b9b2e81 100644 --- a/testhal/STM32/STM32F7xx/USB_MSD/chconf.h +++ b/testhal/STM32/STM32F7xx/USB_MSD/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -52,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000 /** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number @@ -296,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS FALSE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -310,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY FALSE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -408,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -416,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ diff --git a/testhal/STM32/STM32F7xx/USB_MSD/halconf.h b/testhal/STM32/STM32F7xx/USB_MSD/halconf.h index bf1b023..f6520bb 100644 --- a/testhal/STM32/STM32F7xx/USB_MSD/halconf.h +++ b/testhal/STM32/STM32F7xx/USB_MSD/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -31,13 +31,6 @@ #include "mcuconf.h" /** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** * @brief Enables the PAL subsystem. */ #if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) @@ -48,7 +41,7 @@ * @brief Enables the ADC subsystem. */ #if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE +#define HAL_USE_ADC TRUE #endif /** @@ -59,6 +52,13 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** * @brief Enables the DAC subsystem. */ #if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) @@ -76,7 +76,7 @@ * @brief Enables the GPT subsystem. */ #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE +#define HAL_USE_GPT TRUE #endif /** @@ -153,7 +153,7 @@ * @brief Enables the SERIAL over USB subsystem. */ #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE +#define HAL_USE_SERIAL_USB FALSE #endif /** @@ -216,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -301,7 +323,7 @@ * default configuration. */ #if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 115200 +#define SERIAL_DEFAULT_BITRATE 38400 #endif /** @@ -312,7 +334,7 @@ * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 80 +#define SERIAL_BUFFERS_SIZE 16 #endif /*===========================================================================*/ @@ -390,10 +412,6 @@ #define USB_USE_WAIT TRUE #endif -/*===========================================================================*/ -/* Community drivers's includes */ -/*===========================================================================*/ - #include "halconf_community.h" #endif /* HALCONF_H */ diff --git a/testhal/STM32/STM32F7xx/USB_MSD/halconf_community.h b/testhal/STM32/STM32F7xx/USB_MSD/halconf_community.h index 943992f..32d0271 100644 --- a/testhal/STM32/STM32F7xx/USB_MSD/halconf_community.h +++ b/testhal/STM32/STM32F7xx/USB_MSD/halconf_community.h @@ -1,105 +1,173 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - -/** - * @brief Enables the USB_MSD subsystem. - */ -#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__) -#define HAL_USE_USB_MSD TRUE -#endif - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ +/*
+ ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
+
+/**
+ * @brief Enables the community overlay.
+ */
+#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__)
+#define HAL_USE_COMMUNITY TRUE
+#endif
+
+/**
+ * @brief Enables the FSMC subsystem.
+ */
+#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__)
+#define HAL_USE_FSMC FALSE
+#endif
+
+/**
+ * @brief Enables the NAND subsystem.
+ */
+#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__)
+#define HAL_USE_NAND FALSE
+#endif
+
+/**
+ * @brief Enables the 1-wire subsystem.
+ */
+#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__)
+#define HAL_USE_ONEWIRE FALSE
+#endif
+
+/**
+ * @brief Enables the EICU subsystem.
+ */
+#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__)
+#define HAL_USE_EICU FALSE
+#endif
+
+/**
+ * @brief Enables the CRC subsystem.
+ */
+#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__)
+#define HAL_USE_CRC FALSE
+#endif
+
+/**
+ * @brief Enables the RNG subsystem.
+ */
+#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__)
+#define HAL_USE_RNG FALSE
+#endif
+
+/**
+ * @brief Enables the EEPROM subsystem.
+ */
+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
+#define HAL_USE_EEPROM FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
+#define HAL_USE_TIMCAP FALSE
+#endif
+
+/**
+ * @brief Enables the TIMCAP subsystem.
+ */
+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
+#define HAL_USE_COMP FALSE
+#endif
+
+/**
+ * @brief Enables the QEI subsystem.
+ */
+#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
+#define HAL_USE_QEI FALSE
+#endif
+
+/**
+ * @brief Enables the USBH subsystem.
+ */
+#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
+#define HAL_USE_USBH FALSE
+#endif
+
+/**
+ * @brief Enables the USB_MSD subsystem.
+ */
+#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
+#define HAL_USE_USB_MSD TRUE
+#endif
+
+/*===========================================================================*/
+/* FSMCNAND driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define NAND_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* 1-wire driver related settings. */
+/*===========================================================================*/
+/**
+ * @brief Enables strong pull up feature.
+ * @note Disabling this option saves both code and data space.
+ */
+#define ONEWIRE_USE_STRONG_PULLUP FALSE
+
+/**
+ * @brief Enables search ROM feature.
+ * @note Disabling this option saves both code and data space.
+ */
+#define ONEWIRE_USE_SEARCH_ROM TRUE
+
+/*===========================================================================*/
+/* QEI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables discard of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_DISCARD FALSE
+#endif
+
+/**
+ * @brief Enables min max of overlow
+ */
+#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
+#define QEI_USE_OVERFLOW_MINMAX FALSE
+#endif
+
+/*===========================================================================*/
+/* EEProm driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables 24xx series I2C eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE24XX FALSE
+ /**
+ * @brief Enables 25xx series SPI eeprom device driver.
+ * @note Disabling this option saves both code and data space.
+ */
+#define EEPROM_USE_EE25XX FALSE
+
+#endif /* HALCONF_COMMUNITY_H */
+
+/** @} */
diff --git a/testhal/STM32/STM32F7xx/USB_MSD/mcuconf.h b/testhal/STM32/STM32F7xx/USB_MSD/mcuconf.h index c7bf7a1..8ecea35 100644 --- a/testhal/STM32/STM32F7xx/USB_MSD/mcuconf.h +++ b/testhal/STM32/STM32F7xx/USB_MSD/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -18,7 +18,7 @@ #define MCUCONF_H /* - * STM32F4xx drivers configuration. + * STM32F7xx drivers configuration. * The following settings override the default settings present in * the various device driver implementation headers. * Note that the settings for each driver only have effect if the whole @@ -60,18 +60,21 @@ #define STM32_MCO1PRE STM32_MCO1PRE_DIV1 #define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK #define STM32_MCO2PRE STM32_MCO2PRE_DIV4 -#define STM32_I2SSRC STM32_I2SSRC_PLLI2S +#define STM32_I2SSRC STM32_I2SSRC_OFF #define STM32_PLLI2SN_VALUE 192 #define STM32_PLLI2SP_VALUE 4 #define STM32_PLLI2SQ_VALUE 4 #define STM32_PLLI2SR_VALUE 4 +#define STM32_PLLI2SDIVQ_VALUE 2 #define STM32_PLLSAIN_VALUE 192 #define STM32_PLLSAIP_VALUE 4 #define STM32_PLLSAIQ_VALUE 4 #define STM32_PLLSAIR_VALUE 4 -#define STM32_PLLSAIDIVR STM32_PLLSAIDIVR_OFF +#define STM32_PLLSAIDIVQ_VALUE 2 +#define STM32_PLLSAIDIVR_VALUE 2 #define STM32_SAI1SEL STM32_SAI1SEL_OFF #define STM32_SAI2SEL STM32_SAI2SEL_OFF +#define STM32_LCDTFT_REQUIRED FALSE #define STM32_USART1SEL STM32_USART1SEL_PCLK2 #define STM32_USART2SEL STM32_USART2SEL_PCLK1 #define STM32_USART3SEL STM32_USART3SEL_PCLK1 @@ -87,14 +90,32 @@ #define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1 #define STM32_CECSEL STM32_CECSEL_LSE #define STM32_CK48MSEL STM32_CK48MSEL_PLL -#define STM32_SDMMCSEL STM32_SDMMCSEL_PLL48CLK +#define STM32_SDMMC1SEL STM32_SDMMC1SEL_PLL48CLK #define STM32_SRAM2_NOCACHE FALSE /* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* * ADC driver system settings. */ #define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC1 TRUE #define STM32_ADC_USE_ADC2 FALSE #define STM32_ADC_USE_ADC3 FALSE #define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) @@ -113,8 +134,10 @@ */ #define STM32_CAN_USE_CAN1 FALSE #define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_USE_CAN3 FALSE #define STM32_CAN_CAN1_IRQ_PRIORITY 11 #define STM32_CAN_CAN2_IRQ_PRIORITY 11 +#define STM32_CAN_CAN3_IRQ_PRIORITY 11 /* * DAC driver system settings. @@ -130,30 +153,12 @@ #define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) /* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* * GPT driver system settings. */ #define STM32_GPT_USE_TIM1 FALSE #define STM32_GPT_USE_TIM2 FALSE #define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM4 TRUE #define STM32_GPT_USE_TIM5 FALSE #define STM32_GPT_USE_TIM6 FALSE #define STM32_GPT_USE_TIM7 FALSE @@ -383,4 +388,6 @@ */ #define STM32_WDG_USE_IWDG FALSE +#include "mcuconf_community.h" + #endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F7xx/USB_MSD/mcuconf_community.h b/testhal/STM32/STM32F7xx/USB_MSD/mcuconf_community.h new file mode 100644 index 0000000..cf6a1ce --- /dev/null +++ b/testhal/STM32/STM32F7xx/USB_MSD/mcuconf_community.h @@ -0,0 +1,155 @@ +/* + ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * FSMC driver system settings. + */ +#define STM32_FSMC_USE_FSMC1 FALSE +#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 + +/* + * FSMC NAND driver system settings. + */ +#define STM32_NAND_USE_FSMC_NAND1 FALSE +#define STM32_NAND_USE_FSMC_NAND2 FALSE +#define STM32_NAND_USE_EXT_INT FALSE +#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_NAND_DMA_PRIORITY 0 +#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure") + +/* + * FSMC SRAM driver system settings. + */ +#define STM32_USE_FSMC_SRAM FALSE +#define STM32_SRAM_USE_FSMC_SRAM1 FALSE +#define STM32_SRAM_USE_FSMC_SRAM2 FALSE +#define STM32_SRAM_USE_FSMC_SRAM3 FALSE +#define STM32_SRAM_USE_FSMC_SRAM4 FALSE + +/* + * FSMC SDRAM driver system settings. + */ +#define STM32_USE_FSMC_SDRAM FALSE + +/* + * TIMCAP driver system settings. + */ +#define STM32_TIMCAP_USE_TIM1 TRUE +#define STM32_TIMCAP_USE_TIM2 FALSE +#define STM32_TIMCAP_USE_TIM3 TRUE +#define STM32_TIMCAP_USE_TIM4 TRUE +#define STM32_TIMCAP_USE_TIM5 TRUE +#define STM32_TIMCAP_USE_TIM8 TRUE +#define STM32_TIMCAP_USE_TIM9 TRUE +#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3 +#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3 + +/* + * COMP driver system settings. + */ +#define STM32_COMP_USE_COMP1 TRUE +#define STM32_COMP_USE_COMP2 TRUE +#define STM32_COMP_USE_COMP3 TRUE +#define STM32_COMP_USE_COMP4 TRUE +#define STM32_COMP_USE_COMP5 TRUE +#define STM32_COMP_USE_COMP6 TRUE +#define STM32_COMP_USE_COMP7 TRUE + +#define STM32_COMP_USE_INTERRUPTS TRUE +#define STM32_COMP_1_2_3_IRQ_PRIORITY 5 +#define STM32_COMP_4_5_6_IRQ_PRIORITY 5 +#define STM32_COMP_7_IRQ_PRIORITY 5 + +#if STM32_COMP_USE_INTERRUPTS +#define STM32_DISABLE_EXTI21_22_29_HANDLER +#define STM32_DISABLE_EXTI30_32_HANDLER +#define STM32_DISABLE_EXTI33_HANDLER +#endif + +/* + * USBH driver system settings. + */ +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 + +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 + +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 + +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 + +/* + * CRC driver system settings. + */ +#define STM32_CRC_USE_CRC1 TRUE +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 + +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE TRUE +#define CRCSW_CRC16_TABLE TRUE +#define CRCSW_PROGRAMMABLE TRUE + +/* + * EICU driver system settings. + */ +#define STM32_EICU_USE_TIM1 TRUE +#define STM32_EICU_USE_TIM2 FALSE +#define STM32_EICU_USE_TIM3 TRUE +#define STM32_EICU_USE_TIM4 TRUE +#define STM32_EICU_USE_TIM5 TRUE +#define STM32_EICU_USE_TIM8 TRUE +#define STM32_EICU_USE_TIM9 TRUE +#define STM32_EICU_USE_TIM10 TRUE +#define STM32_EICU_USE_TIM11 TRUE +#define STM32_EICU_USE_TIM12 TRUE +#define STM32_EICU_USE_TIM13 TRUE +#define STM32_EICU_USE_TIM14 TRUE +#define STM32_EICU_TIM1_IRQ_PRIORITY 7 +#define STM32_EICU_TIM2_IRQ_PRIORITY 7 +#define STM32_EICU_TIM3_IRQ_PRIORITY 7 +#define STM32_EICU_TIM4_IRQ_PRIORITY 7 +#define STM32_EICU_TIM5_IRQ_PRIORITY 7 +#define STM32_EICU_TIM8_IRQ_PRIORITY 7 +#define STM32_EICU_TIM9_IRQ_PRIORITY 7 +#define STM32_EICU_TIM10_IRQ_PRIORITY 7 +#define STM32_EICU_TIM11_IRQ_PRIORITY 7 +#define STM32_EICU_TIM12_IRQ_PRIORITY 7 +#define STM32_EICU_TIM13_IRQ_PRIORITY 7 +#define STM32_EICU_TIM14_IRQ_PRIORITY 7 + +/* + * QEI driver system settings. + */ +#define STM32_QEI_USE_TIM1 TRUE +#define STM32_QEI_USE_TIM2 FALSE +#define STM32_QEI_USE_TIM3 TRUE +#define STM32_QEI_TIM1_IRQ_PRIORITY 3 +#define STM32_QEI_TIM2_IRQ_PRIORITY 3 +#define STM32_QEI_TIM3_IRQ_PRIORITY 3 diff --git a/testhal/TIVA/TM4C123x/ADC/Makefile b/testhal/TIVA/TM4C123x/ADC/Makefile index 15ea309..f098dc2 100644 --- a/testhal/TIVA/TM4C123x/ADC/Makefile +++ b/testhal/TIVA/TM4C123x/ADC/Makefile @@ -5,7 +5,7 @@ # Compiler options here. ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 endif # C specific options here (added to USE_OPT). @@ -46,7 +46,7 @@ endif # If enabled, this option makes the build process faster by not compiling # modules not used in the current configuration. ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = no + USE_SMART_BUILD = yes endif # @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -106,20 +109,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ +CSRC = $(ALLCSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -142,13 +137,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -184,10 +176,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/ADC/chconf.h b/testhal/TIVA/TM4C123x/ADC/chconf.h index 0d24275..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/ADC/chconf.h +++ b/testhal/TIVA/TM4C123x/ADC/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -41,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000 /** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/ADC/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/ADC/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/ADC/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/ADC/halconf.h b/testhal/TIVA/TM4C123x/ADC/halconf.h index 20f0e46..3501d36 100644 --- a/testhal/TIVA/TM4C123x/ADC/halconf.h +++ b/testhal/TIVA/TM4C123x/ADC/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,6 +52,20 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -138,6 +177,13 @@ #define HAL_USE_USB FALSE #endif +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + /*===========================================================================*/ /* ADC driver related settings. */ /*===========================================================================*/ @@ -170,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -262,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -270,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -289,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/ADC/mcuconf.h b/testhal/TIVA/TM4C123x/ADC/mcuconf.h index 02d79d6..037c1d3 100644 --- a/testhal/TIVA/TM4C123x/ADC/mcuconf.h +++ b/testhal/TIVA/TM4C123x/ADC/mcuconf.h @@ -51,15 +51,16 @@ #define TIVA_ADC_ADC1_SS0_UDMA_MAPPING 1 #define TIVA_ADC0_SEQ0_PRIORITY 4 #define TIVA_ADC1_SEQ0_PRIORITY 4 + /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. diff --git a/testhal/TIVA/TM4C123x/EXT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/EXT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/EXT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/EXT/main.c b/testhal/TIVA/TM4C123x/EXT/main.c deleted file mode 100644 index 2326375..0000000 --- a/testhal/TIVA/TM4C123x/EXT/main.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - Copyright (C) 2014..2017 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void extcb1(EXTDriver *extp, expchannel_t channel) -{ - (void)extp; - (void)channel; - - palToggleLine(LINE_LED_RED); -} - -static void extcb2(EXTDriver *extp, expchannel_t channel) -{ - (void)extp; - (void)channel; - - palToggleLine(LINE_LED_GREEN); -} - -static const EXTConfig extcfg = -{ - { - /* GPIOA */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOB */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOC */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOD */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOE */ - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - /* GPIOF */ - {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART, extcb2}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) -{ - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - palSetLineMode(LINE_LED_RED, PAL_MODE_OUTPUT_PUSHPULL); - palSetLineMode(LINE_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL); - palSetLineMode(LINE_SW1, PAL_MODE_INPUT_PULLUP); - palSetLineMode(LINE_SW2, PAL_MODE_INPUT_PULLUP); - - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - - return 0; -} diff --git a/testhal/TIVA/TM4C123x/GPT/Makefile b/testhal/TIVA/TM4C123x/GPT/Makefile index f2833ec..00661de 100644 --- a/testhal/TIVA/TM4C123x/GPT/Makefile +++ b/testhal/TIVA/TM4C123x/GPT/Makefile @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -105,19 +108,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ +CSRC = $(ALLCSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -182,10 +175,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/GPT/chconf.h b/testhal/TIVA/TM4C123x/GPT/chconf.h index 0d24275..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/GPT/chconf.h +++ b/testhal/TIVA/TM4C123x/GPT/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -41,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000 /** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/GPT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/GPT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/GPT/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/GPT/halconf.h b/testhal/TIVA/TM4C123x/GPT/halconf.h index 4d1738c..cfdf66a 100644 --- a/testhal/TIVA/TM4C123x/GPT/halconf.h +++ b/testhal/TIVA/TM4C123x/GPT/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,6 +52,20 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -138,6 +177,13 @@ #define HAL_USE_USB FALSE #endif +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + /*===========================================================================*/ /* ADC driver related settings. */ /*===========================================================================*/ @@ -170,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -262,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -270,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -289,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/GPT/mcuconf.h b/testhal/TIVA/TM4C123x/GPT/mcuconf.h index 9bcd30d..91acd32 100644 --- a/testhal/TIVA/TM4C123x/GPT/mcuconf.h +++ b/testhal/TIVA/TM4C123x/GPT/mcuconf.h @@ -41,14 +41,14 @@ SYSCTL_RCC_PWMDIV_8) /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. diff --git a/testhal/TIVA/TM4C123x/I2C/Makefile b/testhal/TIVA/TM4C123x/I2C/Makefile index d4d1334..f098dc2 100644 --- a/testhal/TIVA/TM4C123x/I2C/Makefile +++ b/testhal/TIVA/TM4C123x/I2C/Makefile @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -106,20 +109,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - main.c +CSRC = $(ALLCSRC) \ + main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -142,13 +137,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -184,10 +176,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/I2C/chconf.h b/testhal/TIVA/TM4C123x/I2C/chconf.h index 0d24275..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/I2C/chconf.h +++ b/testhal/TIVA/TM4C123x/I2C/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -41,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000 /** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/I2C/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/I2C/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/I2C/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/I2C/halconf.h b/testhal/TIVA/TM4C123x/I2C/halconf.h index 5c926e9..62c1b9c 100644 --- a/testhal/TIVA/TM4C123x/I2C/halconf.h +++ b/testhal/TIVA/TM4C123x/I2C/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,6 +52,20 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -138,6 +177,13 @@ #define HAL_USE_USB FALSE #endif +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + /*===========================================================================*/ /* ADC driver related settings. */ /*===========================================================================*/ @@ -170,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -262,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -270,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -289,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/I2C/main.c b/testhal/TIVA/TM4C123x/I2C/main.c index c46bec9..0253710 100644 --- a/testhal/TIVA/TM4C123x/I2C/main.c +++ b/testhal/TIVA/TM4C123x/I2C/main.c @@ -57,7 +57,7 @@ static const I2CConfig i2cfg = int main(void) { msg_t status = MSG_OK; - systime_t tmo = MS2ST(100); + systime_t tmo = OSAL_MS2I(100); /* * System initializations. diff --git a/testhal/TIVA/TM4C123x/I2C/mcuconf.h b/testhal/TIVA/TM4C123x/I2C/mcuconf.h index 514857e..fe8e77c 100644 --- a/testhal/TIVA/TM4C123x/I2C/mcuconf.h +++ b/testhal/TIVA/TM4C123x/I2C/mcuconf.h @@ -41,14 +41,14 @@ SYSCTL_RCC_PWMDIV_8) /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. diff --git a/testhal/TIVA/TM4C123x/PWM/Makefile b/testhal/TIVA/TM4C123x/PWM/Makefile index f2833ec..00661de 100644 --- a/testhal/TIVA/TM4C123x/PWM/Makefile +++ b/testhal/TIVA/TM4C123x/PWM/Makefile @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -105,19 +108,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ +CSRC = $(ALLCSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -182,10 +175,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/PWM/chconf.h b/testhal/TIVA/TM4C123x/PWM/chconf.h index 0d24275..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/PWM/chconf.h +++ b/testhal/TIVA/TM4C123x/PWM/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -41,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000 /** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/PWM/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/PWM/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/PWM/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/PWM/halconf.h b/testhal/TIVA/TM4C123x/PWM/halconf.h index 433d5d0..2f586f7 100644 --- a/testhal/TIVA/TM4C123x/PWM/halconf.h +++ b/testhal/TIVA/TM4C123x/PWM/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,6 +52,20 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -138,6 +177,13 @@ #define HAL_USE_USB FALSE #endif +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + /*===========================================================================*/ /* ADC driver related settings. */ /*===========================================================================*/ @@ -170,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -262,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -270,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -289,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/PWM/mcuconf.h b/testhal/TIVA/TM4C123x/PWM/mcuconf.h index 29119bd..e4d4e67 100644 --- a/testhal/TIVA/TM4C123x/PWM/mcuconf.h +++ b/testhal/TIVA/TM4C123x/PWM/mcuconf.h @@ -41,14 +41,14 @@ SYSCTL_RCC_PWMDIV_8) /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. diff --git a/testhal/TIVA/TM4C123x/SPI/Makefile b/testhal/TIVA/TM4C123x/SPI/Makefile index f2833ec..00661de 100644 --- a/testhal/TIVA/TM4C123x/SPI/Makefile +++ b/testhal/TIVA/TM4C123x/SPI/Makefile @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -105,19 +108,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ +CSRC = $(ALLCSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -182,10 +175,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/SPI/chconf.h b/testhal/TIVA/TM4C123x/SPI/chconf.h index 0d24275..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/SPI/chconf.h +++ b/testhal/TIVA/TM4C123x/SPI/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -41,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000 /** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/SPI/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/SPI/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/SPI/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/SPI/halconf.h b/testhal/TIVA/TM4C123x/SPI/halconf.h index a8aaed6..51646ad 100644 --- a/testhal/TIVA/TM4C123x/SPI/halconf.h +++ b/testhal/TIVA/TM4C123x/SPI/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,6 +52,20 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -138,6 +177,13 @@ #define HAL_USE_USB FALSE #endif +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + /*===========================================================================*/ /* ADC driver related settings. */ /*===========================================================================*/ @@ -170,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -262,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -270,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -289,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/SPI/mcuconf.h b/testhal/TIVA/TM4C123x/SPI/mcuconf.h index e936c02..e3c5cb5 100644 --- a/testhal/TIVA/TM4C123x/SPI/mcuconf.h +++ b/testhal/TIVA/TM4C123x/SPI/mcuconf.h @@ -41,14 +41,14 @@ SYSCTL_RCC_PWMDIV_8) /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. diff --git a/testhal/TIVA/TM4C123x/UART/.cproject b/testhal/TIVA/TM4C123x/UART/.cproject new file mode 100644 index 0000000..19e6606 --- /dev/null +++ b/testhal/TIVA/TM4C123x/UART/.cproject @@ -0,0 +1,68 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> + <storageModule moduleId="org.eclipse.cdt.core.settings"> + <cconfiguration id="0.114656749"> + <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default"> + <externalSettings/> + <extensions> + <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + </extensions> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg"> + <folderInfo id="0.114656749." name="/" resourcePath=""> + <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain"> + <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/> + <builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/> + <tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/> + <tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1549829577" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> + <listOptionValue builtIn="false" value="C:/ChibiStudio/ChibiOS-Contrib/os/common/ports/ARMCMx/devices/TM4C123x"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/ext/CMSIS/include"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx/compilers/GCC"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx"/> + </option> + <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> + </tool> + <tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.714763797" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> + <listOptionValue builtIn="false" value="C:/ChibiStudio/ChibiOS-Contrib/os/common/ports/ARMCMx/devices/TM4C123x"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/ext/CMSIS/include"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx/compilers/GCC"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx"/> + </option> + <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> + </tool> + <tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.283012868" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> + <listOptionValue builtIn="false" value="C:/ChibiStudio/ChibiOS-Contrib/os/common/ports/ARMCMx/devices/TM4C123x"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/ext/CMSIS/include"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx/compilers/GCC"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx"/> + </option> + <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> + </tool> + </toolChain> + </folderInfo> + </configuration> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> + </cconfiguration> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <project id="TM4C123x-UART.null.1703860681" name="TM4C123x-UART"/> + </storageModule> + <storageModule moduleId="scannerConfiguration"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> + <scannerConfigBuildInfo instanceId="0.114656749"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/> + </scannerConfigBuildInfo> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/> + <storageModule moduleId="refreshScope"/> +</cproject> diff --git a/testhal/TIVA/TM4C123x/UART/.project b/testhal/TIVA/TM4C123x/UART/.project new file mode 100644 index 0000000..255a370 --- /dev/null +++ b/testhal/TIVA/TM4C123x/UART/.project @@ -0,0 +1,101 @@ +<?xml version="1.0" encoding="UTF-8"?> +<projectDescription> + <name>TM4C123x-UART</name> + <comment></comment> + <projects> + </projects> + <buildSpec> + <buildCommand> + <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name> + <triggers>clean,full,incremental,</triggers> + <arguments> + <dictionary> + <key>?name?</key> + <value></value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.append_environment</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.autoBuildTarget</key> + <value>all</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.buildArguments</key> + <value>-j1</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.buildCommand</key> + <value>make</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.cleanBuildTarget</key> + <value>clean</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.contents</key> + <value>org.eclipse.cdt.make.core.activeConfigSettings</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableAutoBuild</key> + <value>false</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableCleanBuild</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableFullBuild</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.fullBuildTarget</key> + <value>all</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.stopOnError</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key> + <value>true</value> + </dictionary> + </arguments> + </buildCommand> + <buildCommand> + <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name> + <triggers>full,incremental,</triggers> + <arguments> + </arguments> + </buildCommand> + </buildSpec> + <natures> + <nature>org.eclipse.cdt.core.cnature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature> + </natures> + <linkedResources> + <link> + <name>board</name> + <type>2</type> + <locationURI>PARENT-1-CHIBIOS/ChibiOS-Contrib/os/hal/boards/TI_TM4C123G_LAUNCHPAD</locationURI> + </link> + <link> + <name>community_os</name> + <type>2</type> + <locationURI>PARENT-1-CHIBIOS/ChibiOS-Contrib/os</locationURI> + </link> + <link> + <name>os</name> + <type>2</type> + <locationURI>CHIBIOS/os</locationURI> + </link> + </linkedResources> + <variableList> + <variable> + <name>CHIBIOS3</name> + <value>file:/C:/ChibiStudio/chibios3</value> + </variable> + </variableList> +</projectDescription> diff --git a/testhal/TIVA/TM4C123x/EXT/Makefile b/testhal/TIVA/TM4C123x/UART/Makefile index f2833ec..00661de 100644 --- a/testhal/TIVA/TM4C123x/EXT/Makefile +++ b/testhal/TIVA/TM4C123x/UART/Makefile @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -105,19 +108,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ +CSRC = $(ALLCSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -182,10 +175,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/EXT/chconf.h b/testhal/TIVA/TM4C123x/UART/chconf.h index c56df3c..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/EXT/chconf.h +++ b/testhal/TIVA/TM4C123x/UART/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -38,7 +49,19 @@ * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ -#define CH_CFG_ST_FREQUENCY 1000 +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 /** * @brief Time delta constant for the tick-less mode. @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/UART/debug/TM4C123x-UART (OpenOCD, Flash and Run).launch b/testhal/TIVA/TM4C123x/UART/debug/TM4C123x-UART (OpenOCD, Flash and Run).launch new file mode 100644 index 0000000..6e2f16c --- /dev/null +++ b/testhal/TIVA/TM4C123x/UART/debug/TM4C123x-UART (OpenOCD, Flash and Run).launch @@ -0,0 +1,52 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType"> +<stringAttribute key="bad_container_name" value="\TM4C123x-UART\debug"/> +<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="monitor reset halt monitor reset init"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/> +<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/> +<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/> +<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/> +<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/> +<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/> +<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/> +<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/> +<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/> +<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList/>"/> +<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/> +<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/> +<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="TM4C123x-UART"/> +<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> +<listEntry value="/TM4C123x-UART"/> +</listAttribute> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> +<listEntry value="4"/> +</listAttribute> +<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> +<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/> +</listAttribute> +</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/UART/halconf.h b/testhal/TIVA/TM4C123x/UART/halconf.h new file mode 100644 index 0000000..bc70eff --- /dev/null +++ b/testhal/TIVA/TM4C123x/UART/halconf.h @@ -0,0 +1,417 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART TRUE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/TIVA/TM4C123x/UART/main.c b/testhal/TIVA/TM4C123x/UART/main.c new file mode 100644 index 0000000..d3b48bc --- /dev/null +++ b/testhal/TIVA/TM4C123x/UART/main.c @@ -0,0 +1,146 @@ +/* + ChibiOS - Copyright (C) 2006..2017 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static virtual_timer_t vt1, vt2; + +static void restart(void *p) { + + (void)p; + + chSysLockFromISR(); + uartStartSendI(&UARTD1, 14, "Hello World!\r\n"); + chSysUnlockFromISR(); +} + +static void ledoff(void *p) { + + (void)p; + palClearLine(LINE_LED_RED); +} + +/* + * This callback is invoked when a transmission buffer has been completely + * read by the driver. + */ +static void txend1(UARTDriver *uartp) { + + (void)uartp; + palSetLine(LINE_LED_RED); +} + +/* + * This callback is invoked when a transmission has physically completed. + */ +static void txend2(UARTDriver *uartp) { + + (void)uartp; + palClearLine(LINE_LED_RED); + chSysLockFromISR(); + chVTResetI(&vt1); + chVTSetI(&vt1, OSAL_MS2I(5000), restart, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked on a receive error, the errors mask is passed + * as parameter. + */ +static void rxerr(UARTDriver *uartp, uartflags_t e) { + + (void)uartp; + (void)e; +} + +/* + * This callback is invoked when a character is received but the application + * was not ready to receive it, the character is passed as parameter. + */ +static void rxchar(UARTDriver *uartp, uint16_t c) { + + (void)uartp; + (void)c; + /* Flashing the LED each time a character is received.*/ + palSetLine(LINE_LED_RED); + chSysLockFromISR(); + chVTResetI(&vt2); + chVTSetI(&vt2, OSAL_MS2I(200), ledoff, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked when a receive buffer has been completely written. + */ +static void rxend(UARTDriver *uartp) { + + (void)uartp; +} + +/* + * UART driver configuration structure. + */ +static UARTConfig uart_cfg_1 = { + txend1, + txend2, + rxend, + rxchar, + rxerr, + 38400, + 0, + UART_LCRH_FEN | UART_LCRH_WLEN_8, + UART_IFLS_TX4_8 | UART_IFLS_RX4_8, + UART_CC_CS_SYSCLK +}; + +/* + * Application entry point. + */ +int main(void) +{ + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + palSetLineMode(LINE_UART0_RX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); + palSetLineMode(LINE_UART0_TX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); + + palSetLineMode(LINE_LED_RED, PAL_MODE_OUTPUT_PUSHPULL); + + /* + * Activates the uart driver 1. + */ + uartStart(&UARTD1, &uart_cfg_1); + + /* + * Starts the transmission, it will be handled entirely in background. + */ + uartStartSend(&UARTD1, 13, "Starting...\r\n"); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (true) { + chThdSleepMilliseconds(5000); + } +} diff --git a/testhal/TIVA/TM4C123x/UART/mcuconf.h b/testhal/TIVA/TM4C123x/UART/mcuconf.h new file mode 100644 index 0000000..fcbf4a9 --- /dev/null +++ b/testhal/TIVA/TM4C123x/UART/mcuconf.h @@ -0,0 +1,196 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * TM4C123x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 7...0 Lowest...Highest. + */ + +#define TM4C123x_MCUCONF + +/* + * HAL driver system settings. + */ +#define TIVA_OSCSRC SYSCTL_RCC2_OSCSRC2_MO +#define TIVA_MOSC_ENABLE TRUE +#define TIVA_DIV400_VALUE 1 +#define TIVA_SYSDIV_VALUE 2 +#define TIVA_USESYSDIV_ENABLE FALSE +#define TIVA_SYSDIV2LSB_ENABLE FALSE +#define TIVA_BYPASS_VALUE 0 +#define TIVA_PWM_FIELDS (SYSCTL_RCC_USEPWMDIV | \ + SYSCTL_RCC_PWMDIV_8) + +/* + * PAL driver system settings. + */ +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define TIVA_GPT_USE_GPT0 FALSE +#define TIVA_GPT_USE_GPT1 FALSE +#define TIVA_GPT_USE_GPT2 FALSE +#define TIVA_GPT_USE_GPT3 FALSE +#define TIVA_GPT_USE_GPT4 FALSE +#define TIVA_GPT_USE_GPT5 FALSE +#define TIVA_GPT_USE_WGPT0 FALSE +#define TIVA_GPT_USE_WGPT1 FALSE +#define TIVA_GPT_USE_WGPT2 FALSE +#define TIVA_GPT_USE_WGPT3 FALSE +#define TIVA_GPT_USE_WGPT4 FALSE +#define TIVA_GPT_USE_WGPT5 FALSE + +#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7 +#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define TIVA_I2C_USE_I2C0 FALSE +#define TIVA_I2C_USE_I2C1 FALSE +#define TIVA_I2C_USE_I2C2 FALSE +#define TIVA_I2C_USE_I2C3 FALSE +#define TIVA_I2C_USE_I2C4 FALSE +#define TIVA_I2C_USE_I2C5 FALSE +#define TIVA_I2C_USE_I2C6 FALSE +#define TIVA_I2C_USE_I2C7 FALSE +#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 + +/* + * PWM driver system settings. + */ +#define TIVA_PWM_USE_PWM0 FALSE +#define TIVA_PWM_USE_PWM1 FALSE +#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4 + +/* + * SERIAL driver system settings. + */ +#define TIVA_SERIAL_USE_UART0 FALSE +#define TIVA_SERIAL_USE_UART1 FALSE +#define TIVA_SERIAL_USE_UART2 FALSE +#define TIVA_SERIAL_USE_UART3 FALSE +#define TIVA_SERIAL_USE_UART4 FALSE +#define TIVA_SERIAL_USE_UART5 FALSE +#define TIVA_SERIAL_USE_UART6 FALSE +#define TIVA_SERIAL_USE_UART7 FALSE +#define TIVA_SERIAL_UART0_PRIORITY 5 +#define TIVA_SERIAL_UART1_PRIORITY 5 +#define TIVA_SERIAL_UART2_PRIORITY 5 +#define TIVA_SERIAL_UART3_PRIORITY 5 +#define TIVA_SERIAL_UART4_PRIORITY 5 +#define TIVA_SERIAL_UART5_PRIORITY 5 +#define TIVA_SERIAL_UART6_PRIORITY 5 +#define TIVA_SERIAL_UART7_PRIORITY 5 + +/* + * UART driver system settings. + */ +#define TIVA_UART_USE_UART0 TRUE +#define TIVA_UART_USE_UART1 FALSE +#define TIVA_UART_USE_UART2 FALSE +#define TIVA_UART_USE_UART3 FALSE +#define TIVA_UART_USE_UART4 FALSE +#define TIVA_UART_USE_UART5 FALSE +#define TIVA_UART_USE_UART6 FALSE +#define TIVA_UART_USE_UART7 FALSE +#define TIVA_UART_UART0_PRIORITY 5 +#define TIVA_UART_UART1_PRIORITY 5 +#define TIVA_UART_UART2_PRIORITY 5 +#define TIVA_UART_UART3_PRIORITY 5 +#define TIVA_UART_UART4_PRIORITY 5 +#define TIVA_UART_UART5_PRIORITY 5 +#define TIVA_UART_UART6_PRIORITY 5 +#define TIVA_UART_UART7_PRIORITY 5 +#define TIVA_UART_UART0_RX_UDMA_CHANNEL 8 +#define TIVA_UART_UART1_RX_UDMA_CHANNEL 22 +#define TIVA_UART_UART2_RX_UDMA_CHANNEL 0 +#define TIVA_UART_UART3_RX_UDMA_CHANNEL 16 +#define TIVA_UART_UART4_RX_UDMA_CHANNEL 18 +#define TIVA_UART_UART5_RX_UDMA_CHANNEL 6 +#define TIVA_UART_UART6_RX_UDMA_CHANNEL 10 +#define TIVA_UART_UART7_RX_UDMA_CHANNEL 20 +#define TIVA_UART_UART0_TX_UDMA_CHANNEL 9 +#define TIVA_UART_UART1_TX_UDMA_CHANNEL 23 +#define TIVA_UART_UART2_TX_UDMA_CHANNEL 1 +#define TIVA_UART_UART3_TX_UDMA_CHANNEL 17 +#define TIVA_UART_UART4_TX_UDMA_CHANNEL 19 +#define TIVA_UART_UART5_TX_UDMA_CHANNEL 7 +#define TIVA_UART_UART6_TX_UDMA_CHANNEL 11 +#define TIVA_UART_UART7_TX_UDMA_CHANNEL 21 +#define TIVA_UART_UART0_RX_UDMA_MAPPING 0 +#define TIVA_UART_UART1_RX_UDMA_MAPPING 0 +#define TIVA_UART_UART2_RX_UDMA_MAPPING 1 +#define TIVA_UART_UART3_RX_UDMA_MAPPING 2 +#define TIVA_UART_UART4_RX_UDMA_MAPPING 2 +#define TIVA_UART_UART5_RX_UDMA_MAPPING 2 +#define TIVA_UART_UART6_RX_UDMA_MAPPING 2 +#define TIVA_UART_UART7_RX_UDMA_MAPPING 2 +#define TIVA_UART_UART0_TX_UDMA_MAPPING 0 +#define TIVA_UART_UART1_TX_UDMA_MAPPING 0 +#define TIVA_UART_UART2_TX_UDMA_MAPPING 1 +#define TIVA_UART_UART3_TX_UDMA_MAPPING 2 +#define TIVA_UART_UART4_TX_UDMA_MAPPING 2 +#define TIVA_UART_UART5_TX_UDMA_MAPPING 2 +#define TIVA_UART_UART6_TX_UDMA_MAPPING 2 +#define TIVA_UART_UART7_TX_UDMA_MAPPING 2 + +/* + * ST driver system settings. + */ +#define TIVA_ST_IRQ_PRIORITY 2 +#define TIVA_ST_USE_WIDE_TIMER TRUE +#define TIVA_ST_TIMER_NUMBER 5 +#define TIVA_ST_TIMER_LETTER A diff --git a/testhal/TIVA/TM4C123x/WDG/Makefile b/testhal/TIVA/TM4C123x/WDG/Makefile index f2833ec..00661de 100644 --- a/testhal/TIVA/TM4C123x/WDG/Makefile +++ b/testhal/TIVA/TM4C123x/WDG/Makefile @@ -71,7 +71,7 @@ endif # Enables the use of FPU on Cortex-M4 (no, softfp, hard). ifeq ($(USE_FPU),) - USE_FPU = hard + USE_FPU = no endif # @@ -88,6 +88,9 @@ PROJECT = ch # Imported source files and paths CHIBIOS = ../../../../../ChibiOS-RT CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk # Startup files. include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk # HAL-OSAL files (optional). @@ -105,19 +108,12 @@ LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ +CSRC = $(ALLCSRC) \ main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. -CPPSRC = +CPPSRC = $(ALLCPPSRC) # C sources to be compiled in ARM mode regardless of the global setting. # NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler @@ -140,13 +136,10 @@ TCSRC = TCPPSRC = # List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various +INCDIR = $(ALLINC) # # Project, sources and paths @@ -182,10 +175,10 @@ AOPT = TOPT = -mthumb -DTHUMB # Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes # Define C++ warning options here -CPPWARN = -Wall -Wextra +CPPWARN = -Wall -Wextra -Wundef # # Compiler settings diff --git a/testhal/TIVA/TM4C123x/WDG/chconf.h b/testhal/TIVA/TM4C123x/WDG/chconf.h index 0d24275..7b3b83f 100644 --- a/testhal/TIVA/TM4C123x/WDG/chconf.h +++ b/testhal/TIVA/TM4C123x/WDG/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _CHCONF_H_ -#define _CHCONF_H_ +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H #define _CHIBIOS_RT_CONF_ #define _CHIBIOS_RT_CONF_VER_5_0_ @@ -41,6 +52,18 @@ #define CH_CFG_ST_FREQUENCY 10000 /** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number @@ -48,14 +71,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 +#define CH_CFG_ST_TIMEDELTA 2 /** @} */ @@ -98,7 +114,8 @@ * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an - * infinite loop. */ + * infinite loop. + */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ @@ -183,6 +200,16 @@ #define CH_CFG_USE_MUTEXES TRUE /** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. @@ -251,14 +278,6 @@ #define CH_CFG_USE_MAILBOXES TRUE /** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** * @brief Core Memory Manager APIs. * @details If enabled then the core memory manager APIs are included * in the kernel. @@ -289,6 +308,15 @@ #define CH_CFG_USE_MEMPOOLS TRUE /** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** * @brief Dynamic Threads APIs. * @details If enabled then the dynamic threads creation APIs are included * in the kernel. @@ -303,6 +331,56 @@ /*===========================================================================*/ /** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** * @name Debug options * @{ */ @@ -345,12 +423,18 @@ /** * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. + * @details If enabled then the trace buffer is activated. * - * @note The default is @p FALSE. + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ -#define CH_DBG_ENABLE_TRACE FALSE +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 /** * @brief Debug option, stack checks. @@ -395,6 +479,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -403,9 +503,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ @@ -415,10 +515,6 @@ /** * @brief Threads finalization hook. * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. */ #define CH_CFG_THREAD_EXIT_HOOK(tp) { \ /* Add threads finalization code here.*/ \ @@ -429,7 +525,7 @@ * @details This hook is invoked just before switching between threads. */ #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ + /* Context switch code here.*/ \ } /** @@ -452,7 +548,8 @@ * should be invoked from here. * @note This macro can be used to activate a power saving mode. */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ } /** @@ -461,7 +558,8 @@ * should be invoked from here. * @note This macro can be used to deactivate a power saving mode. */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ } /** @@ -505,6 +603,6 @@ /* Port-specific settings (override port settings defaulted in chcore.h). */ /*===========================================================================*/ -#endif /* _CHCONF_H_ */ +#endif /* CHCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/WDG/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/testhal/TIVA/TM4C123x/WDG/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 0af6b44..0000000 --- a/testhal/TIVA/TM4C123x/WDG/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\scripts\"/> -</launchConfiguration> diff --git a/testhal/TIVA/TM4C123x/WDG/halconf.h b/testhal/TIVA/TM4C123x/WDG/halconf.h index 2da5421..0a72dc9 100644 --- a/testhal/TIVA/TM4C123x/WDG/halconf.h +++ b/testhal/TIVA/TM4C123x/WDG/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,6 +52,20 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -177,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -269,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -277,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -296,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/WDG/mcuconf.h b/testhal/TIVA/TM4C123x/WDG/mcuconf.h index 3f9030b..7f4af4f 100644 --- a/testhal/TIVA/TM4C123x/WDG/mcuconf.h +++ b/testhal/TIVA/TM4C123x/WDG/mcuconf.h @@ -44,14 +44,14 @@ SYSCTL_RCC_PWMDIV_8) /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. diff --git a/testhal/TIVA/TM4C123x/EXT/.cproject b/testhal/TIVA/multi/PAL/.cproject index 5aa94c5..2867f11 100644 --- a/testhal/TIVA/TM4C123x/EXT/.cproject +++ b/testhal/TIVA/multi/PAL/.cproject @@ -1,6 +1,5 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> -<?fileVersion 4.0.0?> -<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> +<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> <storageModule moduleId="org.eclipse.cdt.core.settings"> <cconfiguration id="0.114656749"> <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default"> @@ -22,12 +21,30 @@ <builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/> <tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/> <tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.972953796" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> + <listOptionValue builtIn="false" value="C:/ChibiStudio/ChibiOS-Contrib/os/common/ports/ARMCMx/devices/TM4C123x"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/ext/CMSIS/include"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx/compilers/GCC"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx"/> + </option> <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> </tool> <tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.959676881" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> + <listOptionValue builtIn="false" value="C:/ChibiStudio/ChibiOS-Contrib/os/common/ports/ARMCMx/devices/TM4C123x"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/ext/CMSIS/include"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx/compilers/GCC"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx"/> + </option> <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> </tool> <tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder"> + <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1617159785" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> + <listOptionValue builtIn="false" value="C:/ChibiStudio/ChibiOS-Contrib/os/common/ports/ARMCMx/devices/TM4C123x"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/ext/CMSIS/include"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx/compilers/GCC"/> + <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios161/os/rt/ports/ARMCMx"/> + </option> <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> </tool> </toolChain> @@ -38,7 +55,7 @@ </cconfiguration> </storageModule> <storageModule moduleId="cdtBuildSystem" version="4.0.0"> - <project id="TM4C123x-EXT.null.1703860681" name="TM4C123x-EXT"/> + <project id="TIVA-PAL.null.1703860681" name="TIVA-PAL"/> </storageModule> <storageModule moduleId="scannerConfiguration"> <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> diff --git a/testhal/TIVA/TM4C123x/EXT/.project b/testhal/TIVA/multi/PAL/.project index c1e2c0f..94844eb 100644 --- a/testhal/TIVA/TM4C123x/EXT/.project +++ b/testhal/TIVA/multi/PAL/.project @@ -1,6 +1,6 @@ <?xml version="1.0" encoding="UTF-8"?> <projectDescription> - <name>TM4C123x-EXT</name> + <name>TIVA-PAL</name> <comment></comment> <projects> </projects> diff --git a/testhal/TIVA/multi/PAL/Makefile b/testhal/TIVA/multi/PAL/Makefile new file mode 100644 index 0000000..a9ef661 --- /dev/null +++ b/testhal/TIVA/multi/PAL/Makefile @@ -0,0 +1,24 @@ +############################################################################## +# Multi-project makefile rules +# + +all: + @echo + @echo === Building for TM4C123G LaunchPad ================================ + @make --no-print-directory -f ./make/tm4c123g_launchpad all + @echo ==================================================================== + @echo + @echo === Building for TM4C1294 Connected LaunchPad ====================== + @make --no-print-directory -f ./make/tm4c1294_launchpad all + @echo ==================================================================== + @echo + +clean: + @echo + -@make --no-print-directory -f ./make/tm4c123g_launchpad clean + @echo + -@make --no-print-directory -f ./make/tm4c1294_launchpad clean + @echo + +# +############################################################################## diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/chconf.h b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/chconf.h new file mode 100644 index 0000000..e42b74e --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/chconf.h @@ -0,0 +1,608 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_5_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/testhal/TIVA/TM4C123x/EXT/halconf.h b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/halconf.h index 6e763ee..97f1ec3 100644 --- a/testhal/TIVA/TM4C123x/EXT/halconf.h +++ b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -14,8 +14,19 @@ limitations under the License. */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H #include "mcuconf.h" @@ -41,10 +52,24 @@ #endif /** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** * @brief Enables the EXT subsystem. */ #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE +#define HAL_USE_EXT FALSE #endif /** @@ -62,6 +87,13 @@ #endif /** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) @@ -90,6 +122,13 @@ #endif /** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) @@ -138,6 +177,13 @@ #define HAL_USE_USB FALSE #endif +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + /*===========================================================================*/ /* ADC driver related settings. */ /*===========================================================================*/ @@ -170,6 +216,28 @@ #endif /*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ /* I2C driver related settings. */ /*===========================================================================*/ @@ -262,7 +330,7 @@ * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) @@ -270,6 +338,29 @@ #endif /*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ /* SPI driver related settings. */ /*===========================================================================*/ @@ -289,6 +380,38 @@ #define SPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ /** @} */ diff --git a/testhal/TIVA/TM4C123x/EXT/mcuconf.h b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/mcuconf.h index e936c02..f59dcb7 100644 --- a/testhal/TIVA/TM4C123x/EXT/mcuconf.h +++ b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/mcuconf.h @@ -41,14 +41,14 @@ SYSCTL_RCC_PWMDIV_8) /* - * GPIO driver system settings. + * PAL driver system settings. */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 /* * GPT driver system settings. @@ -138,7 +138,7 @@ /* * SPI driver system settings. */ -#define TIVA_SPI_USE_SSI0 TRUE +#define TIVA_SPI_USE_SSI0 FALSE #define TIVA_SPI_USE_SSI1 FALSE #define TIVA_SPI_USE_SSI2 FALSE #define TIVA_SPI_USE_SSI3 FALSE diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.c b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.c new file mode 100644 index 0000000..c153bd7 --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.c @@ -0,0 +1,51 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file portab.c + * @brief Application portability module code. + * + * @addtogroup application_portability + * @{ + */ + +#include "portab.h" + +/*===========================================================================*/ +/* Module local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module exported variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module local types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module local variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module local functions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module exported functions. */ +/*===========================================================================*/ + +/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.h b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.h new file mode 100644 index 0000000..8e62cee --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c123g_launchpad/portab.h @@ -0,0 +1,74 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file portab.h + * @brief Application portability macros and structures. + * + * @addtogroup application_portability + * @{ + */ + +#ifndef PORTAB_H +#define PORTAB_H + +/*===========================================================================*/ +/* Module constants. */ +/*===========================================================================*/ + +#define PORTAB_LINE_LED1 LINE_LED_RED +#define PORTAB_LINE_LED2 LINE_LED_BLUE +#define PORTAB_LED_OFF PAL_LOW +#define PORTAB_LED_ON PAL_HIGH + +#define PORTAB_LINE_BUTTON LINE_SW1 +#define PORTAB_BUTTON_PRESSED PAL_LOW + +/*===========================================================================*/ +/* Module pre-compile time settings. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module data structures and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif + +/*===========================================================================*/ +/* Module inline functions. */ +/*===========================================================================*/ + +#endif /* PORTAB_H */ + +/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/chconf.h b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/chconf.h new file mode 100644 index 0000000..3209f1d --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/chconf.h @@ -0,0 +1,608 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_5_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#define CH_CFG_INTERVALS_SIZE 32 + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_TIME_TYPES_SIZE 32 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_OBJ_FIFOS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#define CH_CFG_USE_FACTORY TRUE + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 + +/** + * @brief Enables the registry of generic objects. + */ +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +/** + * @brief Enables factory for generic buffers. + */ +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +/** + * @brief Enables factory for semaphores. + */ +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +/** + * @brief Enables factory for mailboxes. + */ +#define CH_CFG_FACTORY_MAILBOXES TRUE + +/** + * @brief Enables factory for objects FIFOs. + */ +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/halconf.h b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/halconf.h new file mode 100644 index 0000000..97f1ec3 --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/halconf.h @@ -0,0 +1,417 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/mcuconf.h b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/mcuconf.h new file mode 100644 index 0000000..578d4ab --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/mcuconf.h @@ -0,0 +1,152 @@ +/* + Copyright (C) 2014..2017 Marco Veeneman + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * TM4C129x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 7...0 Lowest...Highest. + */ + +#define TM4C129x_MCUCONF + +/* + * HAL driver system settings. + */ +#define TIVA_MOSC_SINGLE_ENDED FALSE +#define TIVA_RSCLKCFG_OSCSRC SYSCTL_RSCLKCFG_OSCSRC_MOSC + +/* + * PAL driver system settings. + */ +#define TIVA_PAL_GPIOA_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOB_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOC_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOD_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOE_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOF_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOG_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOH_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOJ_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOK_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOL_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOM_IRQ_PRIORITY 3 +#define TIVA_PAL_GPION_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP0_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP1_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP2_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP3_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP4_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP5_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP6_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOP7_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ0_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ1_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ2_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ3_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ4_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ5_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ6_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOQ7_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOR_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOS_IRQ_PRIORITY 3 +#define TIVA_PAL_GPIOT_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define TIVA_GPT_USE_GPT0 FALSE +#define TIVA_GPT_USE_GPT1 FALSE +#define TIVA_GPT_USE_GPT2 FALSE +#define TIVA_GPT_USE_GPT3 FALSE +#define TIVA_GPT_USE_GPT4 FALSE +#define TIVA_GPT_USE_GPT5 FALSE +#define TIVA_GPT_USE_GPT6 FALSE +#define TIVA_GPT_USE_GPT7 FALSE +#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT6A_IRQ_PRIORITY 7 +#define TIVA_GPT_GPT7A_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define TIVA_I2C_USE_I2C0 FALSE +#define TIVA_I2C_USE_I2C1 FALSE +#define TIVA_I2C_USE_I2C2 FALSE +#define TIVA_I2C_USE_I2C3 FALSE +#define TIVA_I2C_USE_I2C4 FALSE +#define TIVA_I2C_USE_I2C5 FALSE +#define TIVA_I2C_USE_I2C6 FALSE +#define TIVA_I2C_USE_I2C7 FALSE +#define TIVA_I2C_USE_I2C8 FALSE +#define TIVA_I2C_USE_I2C9 FALSE +#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C8_IRQ_PRIORITY 4 +#define TIVA_I2C_I2C9_IRQ_PRIORITY 4 + +/* + * PWM driver system settings. + */ +#define TIVA_PWM_USE_PWM0 FALSE +#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 +#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 + +/* + * SERIAL driver system settings. + */ +#define TIVA_SERIAL_USE_UART0 FALSE +#define TIVA_SERIAL_USE_UART1 FALSE +#define TIVA_SERIAL_USE_UART2 FALSE +#define TIVA_SERIAL_USE_UART3 FALSE +#define TIVA_SERIAL_USE_UART4 FALSE +#define TIVA_SERIAL_USE_UART5 FALSE +#define TIVA_SERIAL_USE_UART6 FALSE +#define TIVA_SERIAL_USE_UART7 FALSE +#define TIVA_SERIAL_UART0_PRIORITY 5 +#define TIVA_SERIAL_UART1_PRIORITY 5 +#define TIVA_SERIAL_UART2_PRIORITY 5 +#define TIVA_SERIAL_UART3_PRIORITY 5 +#define TIVA_SERIAL_UART4_PRIORITY 5 +#define TIVA_SERIAL_UART5_PRIORITY 5 +#define TIVA_SERIAL_UART6_PRIORITY 5 +#define TIVA_SERIAL_UART7_PRIORITY 5 + +/* + * ST driver system settings. + */ +#define TIVA_ST_IRQ_PRIORITY 2 +#define TIVA_ST_USE_WIDE_TIMER FALSE +#define TIVA_ST_TIMER_NUMBER 5 +#define TIVA_ST_TIMER_LETTER A diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.c b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.c new file mode 100644 index 0000000..c153bd7 --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.c @@ -0,0 +1,51 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file portab.c + * @brief Application portability module code. + * + * @addtogroup application_portability + * @{ + */ + +#include "portab.h" + +/*===========================================================================*/ +/* Module local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module exported variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module local types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module local variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module local functions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module exported functions. */ +/*===========================================================================*/ + +/** @} */ diff --git a/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.h b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.h new file mode 100644 index 0000000..79ae8ec --- /dev/null +++ b/testhal/TIVA/multi/PAL/cfg/tm4c1294_launchpad/portab.h @@ -0,0 +1,74 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file portab.h + * @brief Application portability macros and structures. + * + * @addtogroup application_portability + * @{ + */ + +#ifndef PORTAB_H +#define PORTAB_H + +/*===========================================================================*/ +/* Module constants. */ +/*===========================================================================*/ + +#define PORTAB_LINE_LED1 LINE_LED0 +#define PORTAB_LINE_LED2 LINE_LED1 +#define PORTAB_LED_OFF PAL_HIGH +#define PORTAB_LED_ON PAL_LOW + +#define PORTAB_LINE_BUTTON LINE_SW1 +#define PORTAB_BUTTON_PRESSED PAL_LOW + +/*===========================================================================*/ +/* Module pre-compile time settings. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module data structures and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif + +/*===========================================================================*/ +/* Module inline functions. */ +/*===========================================================================*/ + +#endif /* PORTAB_H */ + +/** @} */ diff --git a/testhal/TIVA/TM4C123x/EXT/debug/TM4C123x-EXT (OpenOCD, Flash and Run).launch b/testhal/TIVA/multi/PAL/debug/TIVA-PAL (Select ELF file)(OpenOCD, Flash and Run).launch index d963642..58cdd74 100644 --- a/testhal/TIVA/TM4C123x/EXT/debug/TM4C123x-EXT (OpenOCD, Flash and Run).launch +++ b/testhal/TIVA/multi/PAL/debug/TIVA-PAL (Select ELF file)(OpenOCD, Flash and Run).launch @@ -1,6 +1,6 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> <launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType"> -<stringAttribute key="bad_container_name" value="\TM4C123x-\debug"/> +<stringAttribute key="bad_container_name" value="\TIVA-PAL\debug"/> <intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/> <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/> <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/> @@ -36,12 +36,12 @@ <stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList><content id="dmachis-spi_serve_interrupt-(format)" val="0"/></contentList>"/> <stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/> <stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/> -<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/> -<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="TM4C123x-EXT"/> +<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="${selected_resource_loc}"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="TIVA-PAL"/> <booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/> <stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/> <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> -<listEntry value="/TM4C123x-EXT"/> +<listEntry value="/TIVA-PAL"/> </listAttribute> <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> <listEntry value="4"/> diff --git a/testhal/TIVA/multi/PAL/main.c b/testhal/TIVA/multi/PAL/main.c new file mode 100644 index 0000000..f9f381d --- /dev/null +++ b/testhal/TIVA/multi/PAL/main.c @@ -0,0 +1,191 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" +#include "portab.h" + +/*===========================================================================*/ +/* Generic code. */ +/*===========================================================================*/ + +#if defined(PORTAB_LINE_LED2) +/* + * LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 1024); +static THD_FUNCTION(Thread1, arg) { + (void)arg; + chRegSetThreadName("blinker"); + while (true) { + systime_t time = palReadLine(PORTAB_LINE_BUTTON) == PORTAB_BUTTON_PRESSED ? 250 : 500; + palToggleLine(PORTAB_LINE_LED2); + chThdSleepMilliseconds(time); + } +} +#endif + +#if PAL_USE_WAIT || defined(__DOXYGEN__) + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + palSetLineMode(PORTAB_LINE_LED1, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(PORTAB_LINE_LED2, PAL_MODE_OUTPUT_PUSHPULL); + palSetLineMode(PORTAB_LINE_BUTTON, PAL_MODE_INPUT_PULLUP); + +#if defined(PORTAB_LINE_LED2) + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); +#endif + + /* Enabling events on both edges of the button line.*/ + palEnableLineEvent(PORTAB_LINE_BUTTON, PAL_EVENT_MODE_BOTH_EDGES); + + /* + * Normal main() thread activity. + */ + while (true) { + /* Waiting for an edge on the button.*/ + palWaitLineTimeout(PORTAB_LINE_BUTTON, TIME_INFINITE); + + /* Action depending on button state.*/ + if (palReadLine(PORTAB_LINE_BUTTON) == PORTAB_BUTTON_PRESSED) { + palWriteLine(PORTAB_LINE_LED1, PORTAB_LED_ON); + } + else { + palWriteLine(PORTAB_LINE_LED1, PORTAB_LED_OFF); + } + } +} + +#endif /* PAL_USE_WAIT */ + +#if !PAL_USE_WAIT && PAL_USE_CALLBACKS + +static event_source_t button_pressed_event; +static event_source_t button_released_event; + +static void button_cb(void *arg) { + + (void)arg; + + chSysLockFromISR(); + if (palReadLine(PORTAB_LINE_BUTTON) == PORTAB_BUTTON_PRESSED) { + chEvtBroadcastI(&button_pressed_event); + } + else { + chEvtBroadcastI(&button_released_event); + } + chSysUnlockFromISR(); +} + +/* + * Application entry point. + */ +int main(void) { + event_listener_t el0, el1; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* Events initialization and registration.*/ + chEvtObjectInit(&button_pressed_event); + chEvtObjectInit(&button_released_event); + chEvtRegister(&button_pressed_event, &el0, 0); + chEvtRegister(&button_released_event, &el1, 1); + +#if defined(PORTAB_LINE_LED2) + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); +#endif + + /* Enabling events on both edges of the button line.*/ + palEnableLineEvent(PORTAB_LINE_BUTTON, PAL_EVENT_MODE_BOTH_EDGES); + palSetLineCallback(PORTAB_LINE_BUTTON, button_cb, NULL); + + /* + * Normal main() thread activity. + */ + while (true) { + eventmask_t events; + + events = chEvtWaitOne(EVENT_MASK(0) | EVENT_MASK(1)); + if (events & EVENT_MASK(0)) { + palWriteLine(PORTAB_LINE_LED1, PORTAB_LED_ON); + } + if (events & EVENT_MASK(1)) { + palWriteLine(PORTAB_LINE_LED1, PORTAB_LED_OFF); + } + } +} +#endif /* !PAL_USE_WAIT && PAL_USE_CALLBACKS */ + +#if !PAL_USE_WAIT && !PAL_USE_CALLBACKS +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + +#if defined(PORTAB_LINE_LED2) + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); +#endif + + /* + * Normal main() thread activity. + */ + while (true) { + palToggleLine(PORTAB_LINE_LED1); + chThdSleepMilliseconds(500); + } +} +#endif /* !PAL_USE_WAIT && !PAL_USE_CALLBACKS */ diff --git a/testhal/TIVA/multi/PAL/make/tm4c123g_launchpad b/testhal/TIVA/multi/PAL/make/tm4c123g_launchpad new file mode 100644 index 0000000..5aba90a --- /dev/null +++ b/testhal/TIVA/multi/PAL/make/tm4c123g_launchpad @@ -0,0 +1,215 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +CONFDIR := ./cfg/tm4c123g_launchpad +BUILDDIR := ./build/tm4c123g_launchpad +DEPDIR := ./.dep/tm4c123g_launchpad + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C123x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(ALLCSRC) \ + $(CONFDIR)/portab.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = $(ALLCPPSRC) + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) + +INCDIR = $(ALLINC) $(CONFDIR) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/TIVA/multi/PAL/make/tm4c1294_launchpad b/testhal/TIVA/multi/PAL/make/tm4c1294_launchpad new file mode 100644 index 0000000..82523ed --- /dev/null +++ b/testhal/TIVA/multi/PAL/make/tm4c1294_launchpad @@ -0,0 +1,215 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +CONFDIR := ./cfg/tm4c1294_launchpad +BUILDDIR := ./build/tm4c1294_launchpad +DEPDIR := ./.dep/tm4c1294_launchpad + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c129x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C129x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/TM4C129xNC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(ALLCSRC) \ + $(CONFDIR)/portab.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = $(ALLCPPSRC) + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) + +INCDIR = $(ALLINC) $(CONFDIR) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/common/onewire/testhal_onewire.c b/testhal/common/onewire/testhal_onewire.c index 93dcc31..2ba0e68 100644 --- a/testhal/common/onewire/testhal_onewire.c +++ b/testhal/common/onewire/testhal_onewire.c @@ -191,7 +191,7 @@ void onewireTest(void) { testbuf[1] = ONEWIRE_CMD_CONVERT_TEMP; #if ONEWIRE_USE_STRONG_PULLUP - onewireWrite(&OWD1, testbuf, 2, MS2ST(750)); + onewireWrite(&OWD1, testbuf, 2, TIME_MS2I(750)); #else onewireWrite(&OWD1, testbuf, 2, 0); /* poll bus waiting ready signal from all connected devices */ |