diff options
Diffstat (limited to 'testhal')
33 files changed, 523 insertions, 554 deletions
diff --git a/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c b/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c index 24a732f..96bfdba 100644 --- a/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c +++ b/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c @@ -284,7 +284,7 @@ static void usb_event(USBDriver *usbp, usbevent_t event) { chSysLockFromISR();
/* Disconnection event on suspend.*/
- sduDisconnectI(&SDU1);
+ sduSuspendHookI(&SDU1);
chSysUnlockFromISR();
return;
diff --git a/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c b/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c index 3093640..fa5b4f4 100644 --- a/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c +++ b/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c @@ -284,7 +284,7 @@ static void usb_event(USBDriver *usbp, usbevent_t event) { chSysLockFromISR();
/* Disconnection event on suspend.*/
- sduDisconnectI(&SDU1);
+ sduSuspendHookI(&SDU1);
chSysUnlockFromISR();
return;
diff --git a/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c b/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c index 3093640..fa5b4f4 100644 --- a/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c +++ b/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c @@ -284,7 +284,7 @@ static void usb_event(USBDriver *usbp, usbevent_t event) { chSysLockFromISR();
/* Disconnection event on suspend.*/
- sduDisconnectI(&SDU1);
+ sduSuspendHookI(&SDU1);
chSysUnlockFromISR();
return;
diff --git a/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c b/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c index 3093640..fa5b4f4 100644 --- a/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c +++ b/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c @@ -284,7 +284,7 @@ static void usb_event(USBDriver *usbp, usbevent_t event) { chSysLockFromISR();
/* Disconnection event on suspend.*/
- sduDisconnectI(&SDU1);
+ sduSuspendHookI(&SDU1);
chSysUnlockFromISR();
return;
diff --git a/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c b/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c index 3093640..fa5b4f4 100644 --- a/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c +++ b/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c @@ -284,7 +284,7 @@ static void usb_event(USBDriver *usbp, usbevent_t event) { chSysLockFromISR();
/* Disconnection event on suspend.*/
- sduDisconnectI(&SDU1);
+ sduSuspendHookI(&SDU1);
chSysUnlockFromISR();
return;
diff --git a/testhal/STM32/STM32F0xx/crc/halconf_community.h b/testhal/STM32/STM32F0xx/crc/halconf_community.h index 2bc41bf..31ac01e 100644 --- a/testhal/STM32/STM32F0xx/crc/halconf_community.h +++ b/testhal/STM32/STM32F0xx/crc/halconf_community.h @@ -14,8 +14,8 @@ limitations under the License.
*/
-#ifndef _HALCONF_COMMUNITY_H_
-#define _HALCONF_COMMUNITY_H_
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
/**
* @brief Enables the community overlay.
@@ -113,6 +113,6 @@ #define CRC_USE_MUTUAL_EXCLUSION TRUE
#endif
-#endif /* _HALCONF_COMMUNITY_H_ */
+#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F0xx/crc/mcuconf_community.h b/testhal/STM32/STM32F0xx/crc/mcuconf_community.h index 8df78ec..bbd2608 100644 --- a/testhal/STM32/STM32F0xx/crc/mcuconf_community.h +++ b/testhal/STM32/STM32F0xx/crc/mcuconf_community.h @@ -14,8 +14,8 @@ limitations under the License. */ -#ifndef _MCUCONF_COMMUNITY_H_ -#define _MCUCONF_COMMUNITY_H_ +#ifndef MCUCONF_COMMUNITY_H +#define MCUCONF_COMMUNITY_H /* * CRC driver system settings. @@ -30,4 +30,4 @@ #define CRCSW_CRC16_TABLE TRUE #define CRCSW_PROGRAMMABLE TRUE -#endif +#endif /* MCUCONF_COMMUNITY_H */ diff --git a/testhal/STM32/STM32F0xx/onewire/Makefile b/testhal/STM32/STM32F0xx/onewire/Makefile index e478e3a..de965e3 100644 --- a/testhal/STM32/STM32F0xx/onewire/Makefile +++ b/testhal/STM32/STM32F0xx/onewire/Makefile @@ -75,7 +75,7 @@ endif PROJECT = ch
# Imported source files and paths
-CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS = ../../../../../ChibiOS-RT
CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
TESTHAL = $(CHIBIOS_CONTRIB)/testhal/common/onewire
# Startup files.
@@ -104,7 +104,7 @@ CSRC = $(STARTUPSRC) \ $(TESTSRC) \
main.c \
$(TESTHAL)/testhal_onewire.c
-
+
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CPPSRC =
diff --git a/testhal/STM32/STM32F0xx/onewire/halconf.h b/testhal/STM32/STM32F0xx/onewire/halconf.h index c3b1671..64811a5 100644 --- a/testhal/STM32/STM32F0xx/onewire/halconf.h +++ b/testhal/STM32/STM32F0xx/onewire/halconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -25,8 +25,8 @@ * @{
*/
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
+#ifndef HALCONF_H
+#define HALCONF_H
#include "mcuconf.h"
@@ -45,17 +45,17 @@ #endif
/**
- * @brief Enables the DAC subsystem.
+ * @brief Enables the CAN subsystem.
*/
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
#endif
/**
- * @brief Enables the CAN subsystem.
+ * @brief Enables the DAC subsystem.
*/
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
#endif
/**
@@ -294,7 +294,7 @@ * @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
+ * @note The default is 16 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
@@ -309,13 +309,21 @@ * @brief Serial over USB buffers size.
* @details Configuration parameter, the buffer size must be a multiple of
* the USB data endpoint maximum packet size.
- * @note The default is 64 bytes for both the transmission and receive
+ * @note The default is 256 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_SIZE 256
#endif
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
@@ -337,11 +345,43 @@ #endif
/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT FALSE
+#endif
+
+/*===========================================================================*/
/* Community drivers's includes */
/*===========================================================================*/
#include "halconf_community.h"
-#endif /* _HALCONF_H_ */
+#endif /* HALCONF_H */
/** @} */
diff --git a/testhal/STM32/STM32F0xx/onewire/halconf_community.h b/testhal/STM32/STM32F0xx/onewire/halconf_community.h index 91dbfbc..0621fdb 100644 --- a/testhal/STM32/STM32F0xx/onewire/halconf_community.h +++ b/testhal/STM32/STM32F0xx/onewire/halconf_community.h @@ -14,8 +14,8 @@ limitations under the License.
*/
-#ifndef _HALCONF_COMMUNITY_H_
-#define _HALCONF_COMMUNITY_H_
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
/**
* @brief Enables the community overlay.
@@ -93,6 +93,6 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
-#endif /* _HALCONF_COMMUNITY_H_ */
+#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F0xx/onewire/mcuconf.h b/testhal/STM32/STM32F0xx/onewire/mcuconf.h index 89b0fd1..7773406 100644 --- a/testhal/STM32/STM32F0xx/onewire/mcuconf.h +++ b/testhal/STM32/STM32F0xx/onewire/mcuconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -14,6 +14,9 @@ limitations under the License.
*/
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
/*
* STM32F0xx drivers configuration.
* The following settings override the default settings present in
@@ -156,6 +159,13 @@ #define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+/*
* header for community drivers.
*/
#include "mcuconf_community.h"
+
+#endif /* MCUCONF_H */
diff --git a/testhal/STM32/STM32F1xx/onewire/halconf.h b/testhal/STM32/STM32F1xx/onewire/halconf.h index e6ce929..64811a5 100644 --- a/testhal/STM32/STM32F1xx/onewire/halconf.h +++ b/testhal/STM32/STM32F1xx/onewire/halconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006-2014 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -25,8 +25,8 @@ * @{
*/
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
+#ifndef HALCONF_H
+#define HALCONF_H
#include "mcuconf.h"
@@ -45,17 +45,17 @@ #endif
/**
- * @brief Enables the DAC subsystem.
+ * @brief Enables the CAN subsystem.
*/
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
#endif
/**
- * @brief Enables the CAN subsystem.
+ * @brief Enables the DAC subsystem.
*/
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
#endif
/**
@@ -294,7 +294,7 @@ * @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
+ * @note The default is 16 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
@@ -309,13 +309,21 @@ * @brief Serial over USB buffers size.
* @details Configuration parameter, the buffer size must be a multiple of
* the USB data endpoint maximum packet size.
- * @note The default is 64 bytes for both the transmission and receive
+ * @note The default is 256 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_SIZE 256
#endif
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
@@ -337,11 +345,43 @@ #endif
/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT FALSE
+#endif
+
+/*===========================================================================*/
/* Community drivers's includes */
/*===========================================================================*/
#include "halconf_community.h"
-#endif /* _HALCONF_H_ */
+#endif /* HALCONF_H */
/** @} */
diff --git a/testhal/STM32/STM32F1xx/onewire/halconf_community.h b/testhal/STM32/STM32F1xx/onewire/halconf_community.h index 91dbfbc..0621fdb 100644 --- a/testhal/STM32/STM32F1xx/onewire/halconf_community.h +++ b/testhal/STM32/STM32F1xx/onewire/halconf_community.h @@ -14,8 +14,8 @@ limitations under the License.
*/
-#ifndef _HALCONF_COMMUNITY_H_
-#define _HALCONF_COMMUNITY_H_
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
/**
* @brief Enables the community overlay.
@@ -93,6 +93,6 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
-#endif /* _HALCONF_COMMUNITY_H_ */
+#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F3xx/EEProm/halconf.h b/testhal/STM32/STM32F3xx/EEProm/halconf.h index 42c228e..53edc1b 100644 --- a/testhal/STM32/STM32F3xx/EEProm/halconf.h +++ b/testhal/STM32/STM32F3xx/EEProm/halconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -25,8 +25,8 @@ * @{
*/
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
+#ifndef HALCONF_H
+#define HALCONF_H
#include "mcuconf.h"
@@ -382,6 +382,6 @@ #include "halconf_community.h"
-#endif /* _HALCONF_H_ */
+#endif /* HALCONF_H */
/** @} */
diff --git a/testhal/STM32/STM32F3xx/EEProm/halconf_community.h b/testhal/STM32/STM32F3xx/EEProm/halconf_community.h index 3916efb..f0814c6 100644 --- a/testhal/STM32/STM32F3xx/EEProm/halconf_community.h +++ b/testhal/STM32/STM32F3xx/EEProm/halconf_community.h @@ -14,8 +14,8 @@ limitations under the License.
*/
-#ifndef _HALCONF_COMMUNITY_H_
-#define _HALCONF_COMMUNITY_H_
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
/**
* @brief Enables the community overlay.
@@ -100,7 +100,7 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
- /*===========================================================================*/
+/*===========================================================================*/
/* EEProm driver related settings. */
/*===========================================================================*/
@@ -109,13 +109,12 @@ * @note Disabling this option saves both code and data space.
*/
#define EEPROM_USE_EE24XX TRUE
- /**
+/**
* @brief Enables 25xx series SPI eeprom device driver.
* @note Disabling this option saves both code and data space.
*/
#define EEPROM_USE_EE25XX TRUE
-
-#endif /* _HALCONF_COMMUNITY_H_ */
+#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F3xx/EEProm/mcuconf.h b/testhal/STM32/STM32F3xx/EEProm/mcuconf.h index 60b9854..badcd95 100644 --- a/testhal/STM32/STM32F3xx/EEProm/mcuconf.h +++ b/testhal/STM32/STM32F3xx/EEProm/mcuconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -14,8 +14,8 @@ limitations under the License.
*/
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
+#ifndef MCUCONF_H
+#define MCUCONF_H
/*
* STM32F3xx drivers configuration.
@@ -255,4 +255,4 @@ */
#include "mcuconf_community.h"
-#endif /* _MCUCONF_H_ */
+#endif /* MCUCONF_H */
diff --git a/testhal/STM32/STM32F3xx/TIMCAP/halconf.h b/testhal/STM32/STM32F3xx/TIMCAP/halconf.h index 9af6aca..93cc713 100644 --- a/testhal/STM32/STM32F3xx/TIMCAP/halconf.h +++ b/testhal/STM32/STM32F3xx/TIMCAP/halconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -25,8 +25,8 @@ * @{
*/
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
+#ifndef HALCONF_H
+#define HALCONF_H
#include "mcuconf.h"
@@ -382,6 +382,6 @@ #include "halconf_community.h"
-#endif /* _HALCONF_H_ */
+#endif /* HALCONF_H */
/** @} */
diff --git a/testhal/STM32/STM32F3xx/TIMCAP/halconf_community.h b/testhal/STM32/STM32F3xx/TIMCAP/halconf_community.h index 998080e..40070e6 100644 --- a/testhal/STM32/STM32F3xx/TIMCAP/halconf_community.h +++ b/testhal/STM32/STM32F3xx/TIMCAP/halconf_community.h @@ -14,8 +14,8 @@ limitations under the License.
*/
-#ifndef _HALCONF_COMMUNITY_H_
-#define _HALCONF_COMMUNITY_H_
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
/**
* @brief Enables the community overlay.
@@ -107,7 +107,7 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
- /*===========================================================================*/
+/*===========================================================================*/
/* EEProm driver related settings. */
/*===========================================================================*/
@@ -122,7 +122,6 @@ */
#define EEPROM_USE_EE25XX TRUE
-
-#endif /* _HALCONF_COMMUNITY_H_ */
+#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F3xx/TIMCAP/mcuconf.h b/testhal/STM32/STM32F3xx/TIMCAP/mcuconf.h index 60b9854..badcd95 100644 --- a/testhal/STM32/STM32F3xx/TIMCAP/mcuconf.h +++ b/testhal/STM32/STM32F3xx/TIMCAP/mcuconf.h @@ -1,5 +1,5 @@ /*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -14,8 +14,8 @@ limitations under the License.
*/
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
+#ifndef MCUCONF_H
+#define MCUCONF_H
/*
* STM32F3xx drivers configuration.
@@ -255,4 +255,4 @@ */
#include "mcuconf_community.h"
-#endif /* _MCUCONF_H_ */
+#endif /* MCUCONF_H */
diff --git a/testhal/STM32/STM32F4xx/EICU/halconf_community.h b/testhal/STM32/STM32F4xx/EICU/halconf_community.h index e967c6a..42c8c5d 100644 --- a/testhal/STM32/STM32F4xx/EICU/halconf_community.h +++ b/testhal/STM32/STM32F4xx/EICU/halconf_community.h @@ -14,8 +14,8 @@ limitations under the License.
*/
-#ifndef _HALCONF_COMMUNITY_H_
-#define _HALCONF_COMMUNITY_H_
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
/**
* @brief Enables the community overlay.
@@ -93,6 +93,6 @@ */
#define ONEWIRE_USE_SEARCH_ROM FALSE
-#endif /* _HALCONF_COMMUNITY_H_ */
+#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F4xx/FSMC_NAND/halconf_community.h b/testhal/STM32/STM32F4xx/FSMC_NAND/halconf_community.h index f480707..acbf837 100644 --- a/testhal/STM32/STM32F4xx/FSMC_NAND/halconf_community.h +++ b/testhal/STM32/STM32F4xx/FSMC_NAND/halconf_community.h @@ -14,8 +14,8 @@ limitations under the License.
*/
-#ifndef _HALCONF_COMMUNITY_H_
-#define _HALCONF_COMMUNITY_H_
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
/**
* @brief Enables the community overlay.
@@ -93,6 +93,6 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
-#endif /* _HALCONF_COMMUNITY_H_ */
+#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h b/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h index 606fed4..060481a 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h +++ b/testhal/STM32/STM32F4xx/FSMC_SDRAM/halconf_community.h @@ -14,8 +14,8 @@ limitations under the License.
*/
-#ifndef _HALCONF_COMMUNITY_H_
-#define _HALCONF_COMMUNITY_H_
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
/**
* @brief Enables the community overlay.
@@ -93,6 +93,6 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
-#endif /* _HALCONF_COMMUNITY_H_ */
+#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h b/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h index 606fed4..060481a 100644 --- a/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h +++ b/testhal/STM32/STM32F4xx/FSMC_SRAM/halconf_community.h @@ -14,8 +14,8 @@ limitations under the License.
*/
-#ifndef _HALCONF_COMMUNITY_H_
-#define _HALCONF_COMMUNITY_H_
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
/**
* @brief Enables the community overlay.
@@ -93,6 +93,6 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
-#endif /* _HALCONF_COMMUNITY_H_ */
+#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F4xx/USB_HOST/Makefile b/testhal/STM32/STM32F4xx/USB_HOST/Makefile index 4946cba..0174baf 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/Makefile +++ b/testhal/STM32/STM32F4xx/USB_HOST/Makefile @@ -46,7 +46,7 @@ endif # If enabled, this option makes the build process faster by not compiling
# modules not used in the current configuration.
ifeq ($(USE_SMART_BUILD),)
- USE_SMART_BUILD = no
+ USE_SMART_BUILD = yes
endif
#
@@ -105,7 +105,7 @@ include $(CHIBIOS)/os/various/shell/shell.mk include $(CHIBIOS)/os/various/fatfs_bindings/fatfs.mk
# Define linker script file here
-LDSCRIPT = $(STARTUPLD)/STM32F407xG.ld
+LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
diff --git a/testhal/STM32/STM32F4xx/USB_HOST/fatfs_diskio.c b/testhal/STM32/STM32F4xx/USB_HOST/fatfs_diskio.c index 98a7edf..41e3553 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/fatfs_diskio.c +++ b/testhal/STM32/STM32F4xx/USB_HOST/fatfs_diskio.c @@ -9,7 +9,6 @@ #include "ffconf.h"
#include "diskio.h"
-#include "usbh.h"
#include "usbh/dev/msd.h"
/*-----------------------------------------------------------------------*/
diff --git a/testhal/STM32/STM32F4xx/USB_HOST/ff.c b/testhal/STM32/STM32F4xx/USB_HOST/ff.c index 45e20ce..2edbe32 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/ff.c +++ b/testhal/STM32/STM32F4xx/USB_HOST/ff.c @@ -1,5 +1,5 @@ /*----------------------------------------------------------------------------/
-/ FatFs - FAT file system module R0.10c (C)ChaN, 2014
+/ FatFs - FAT file system module R0.10b (C)ChaN, 2014
/-----------------------------------------------------------------------------/
/ FatFs module is a generic FAT file system module for small embedded systems.
/ This is a free software that opened for education, research and commercial
@@ -113,10 +113,6 @@ / Fixed creation of an entry with LFN fails on too many SFN collisions.
/ May 19,'14 R0.10b Fixed a hard error in the disk I/O layer can collapse the directory entry.
/ Fixed LFN entry is not deleted on delete/rename an object with lossy converted SFN.
-/ Nov 09,'14 R0.10c Added a configuration option for the platforms without RTC. (_FS_NORTC)
-/ Fixed volume label created by Mac OS X cannot be retrieved with f_getlabel().
-/ Fixed a potential problem of FAT access that can appear on disk error.
-/ Fixed null pointer dereference on attempting to delete the root direcotry.
/---------------------------------------------------------------------------*/
#include "ff.h" /* Declarations of FatFs API */
@@ -131,7 +127,7 @@ ---------------------------------------------------------------------------*/
-#if _FATFS != 80376 /* Revision ID */
+#if _FATFS != 8051 /* Revision ID */
#error Wrong include file (ff.h).
#endif
@@ -139,7 +135,7 @@ /* Reentrancy related */
#if _FS_REENTRANT
#if _USE_LFN == 1
-#error Static LFN work area cannot be used at thread-safe configuration
+#error Static LFN work area cannot be used at thread-safe configuration.
#endif
#define ENTER_FF(fs) { if (!lock_fs(fs)) return FR_TIMEOUT; }
#define LEAVE_FF(fs, res) { unlock_fs(fs, res); return res; }
@@ -153,7 +149,7 @@ /* Definitions of sector size */
#if (_MAX_SS < _MIN_SS) || (_MAX_SS != 512 && _MAX_SS != 1024 && _MAX_SS != 2048 && _MAX_SS != 4096) || (_MIN_SS != 512 && _MIN_SS != 1024 && _MIN_SS != 2048 && _MIN_SS != 4096)
-#error Wrong sector size configuration
+#error Wrong sector size configuration.
#endif
#if _MAX_SS == _MIN_SS
#define SS(fs) ((UINT)_MAX_SS) /* Fixed sector size */
@@ -162,21 +158,10 @@ #endif
-/* Timestamp feature */
-#if _FS_NORTC == 1
-#if _NORTC_YEAR < 1980 || _NORTC_YEAR > 2107 || _NORTC_MON < 1 || _NORTC_MON > 12 || _NORTC_MDAY < 1 || _NORTC_MDAY > 31
-#error Invalid _FS_NORTC settings
-#endif
-#define GET_FATTIME() ((DWORD)(_NORTC_YEAR - 1980) << 25 | (DWORD)_NORTC_MON << 21 | (DWORD)_NORTC_MDAY << 16)
-#else
-#define GET_FATTIME() get_fattime()
-#endif
-
-
/* File access control feature */
#if _FS_LOCK
#if _FS_READONLY
-#error _FS_LOCK must be 0 at read-only configuration
+#error _FS_LOCK must be 0 at read-only cfg.
#endif
typedef struct {
FATFS *fs; /* Object ID 1, volume (NULL:blank entry) */
@@ -413,7 +398,7 @@ typedef struct { /* Name status flags */
-#define NSFLAG 11 /* Index of name status byte in fn[] */
+#define NS 11 /* Index of name status byte in fn[] */
#define NS_LOSS 0x01 /* Out of 8.3 format */
#define NS_LFN 0x02 /* Force to create LFN entry */
#define NS_LAST 0x04 /* Last segment */
@@ -422,16 +407,16 @@ typedef struct { #define NS_DOT 0x20 /* Dot entry */
-/* FAT sub-type boundaries (Differ from specs but correct for real DOS/Windows) */
-#define MIN_FAT16 4086U /* Minimum number of clusters as FAT16 */
-#define MIN_FAT32 65526U /* Minimum number of clusters as FAT32 */
+/* FAT sub-type boundaries */
+#define MIN_FAT16 4086U /* Minimum number of clusters for FAT16 */
+#define MIN_FAT32 65526U /* Minimum number of clusters for FAT32 */
/* FatFs refers the members in the FAT structures as byte array instead of
/ structure member because the structure is not binary compatible between
/ different platforms */
-#define BS_jmpBoot 0 /* x86 jump instruction (3) */
+#define BS_jmpBoot 0 /* Jump instruction (3) */
#define BS_OEMName 3 /* OEM name (8) */
#define BPB_BytsPerSec 11 /* Sector size [byte] (2) */
#define BPB_SecPerClus 13 /* Cluster size [sector] (1) */
@@ -497,53 +482,63 @@ typedef struct { /*------------------------------------------------------------*/
/* Module private work area */
/*------------------------------------------------------------*/
-/* Remark: Uninitialized variables with static duration are
-/ guaranteed zero/null at start-up. If not, either the linker
-/ or start-up routine being used is out of ANSI-C standard.
+/* Note that uninitialized variables with static duration are
+/ guaranteed zero/null as initial value. If not, either the
+/ linker or start-up routine is out of ANSI-C standard.
*/
-#if _VOLUMES < 1 || _VOLUMES > 9
-#error Wrong _VOLUMES setting
+#if _VOLUMES >= 1 || _VOLUMES <= 10
+static
+FATFS *FatFs[_VOLUMES]; /* Pointer to the file system objects (logical drives) */
+#else
+#error Number of volumes must be 1 to 10.
#endif
-static FATFS *FatFs[_VOLUMES]; /* Pointer to the file system objects (logical drives) */
-static WORD Fsid; /* File system mount ID */
+
+static
+WORD Fsid; /* File system mount ID */
#if _FS_RPATH && _VOLUMES >= 2
-static BYTE CurrVol; /* Current drive */
+static
+BYTE CurrVol; /* Current drive */
#endif
#if _FS_LOCK
-static FILESEM Files[_FS_LOCK]; /* Open object lock semaphores */
+static
+FILESEM Files[_FS_LOCK]; /* Open object lock semaphores */
#endif
-#if _USE_LFN == 0 /* Non LFN feature */
+#if _USE_LFN == 0 /* No LFN feature */
#define DEF_NAMEBUF BYTE sfn[12]
#define INIT_BUF(dobj) (dobj).fn = sfn
#define FREE_BUF()
-#else
-#if _MAX_LFN < 12 || _MAX_LFN > 255
-#error Wrong _MAX_LFN setting
-#endif
-#if _USE_LFN == 1 /* LFN feature with static working buffer */
-static WCHAR LfnBuf[_MAX_LFN+1];
+
+#elif _USE_LFN == 1 /* LFN feature with static working buffer */
+static
+WCHAR LfnBuf[_MAX_LFN+1];
#define DEF_NAMEBUF BYTE sfn[12]
#define INIT_BUF(dobj) { (dobj).fn = sfn; (dobj).lfn = LfnBuf; }
#define FREE_BUF()
+
#elif _USE_LFN == 2 /* LFN feature with dynamic working buffer on the stack */
#define DEF_NAMEBUF BYTE sfn[12]; WCHAR lbuf[_MAX_LFN+1]
#define INIT_BUF(dobj) { (dobj).fn = sfn; (dobj).lfn = lbuf; }
#define FREE_BUF()
+
#elif _USE_LFN == 3 /* LFN feature with dynamic working buffer on the heap */
#define DEF_NAMEBUF BYTE sfn[12]; WCHAR *lfn
-#define INIT_BUF(dobj) { lfn = ff_memalloc((_MAX_LFN + 1) * 2); if (!lfn) LEAVE_FF((dobj).fs, FR_NOT_ENOUGH_CORE); (dobj).lfn = lfn; (dobj).fn = sfn; }
+#define INIT_BUF(dobj) { lfn = ff_memalloc((_MAX_LFN + 1) * 2); \
+ if (!lfn) LEAVE_FF((dobj).fs, FR_NOT_ENOUGH_CORE); \
+ (dobj).lfn = lfn; (dobj).fn = sfn; }
#define FREE_BUF() ff_memfree(lfn)
+
#else
-#error Wrong _USE_LFN setting
-#endif
+#error Wrong LFN configuration.
#endif
+
#ifdef _EXCVT
-static const BYTE ExCvt[] = _EXCVT; /* Upper conversion table for extended characters */
+static
+const BYTE ExCvt[] = _EXCVT; /* Upper conversion table for extended characters */
#endif
@@ -763,24 +758,21 @@ FRESULT sync_window ( {
DWORD wsect;
UINT nf;
- FRESULT res = FR_OK;
if (fs->wflag) { /* Write back the sector if it is dirty */
wsect = fs->winsect; /* Current sector number */
- if (disk_write(fs->drv, fs->win, wsect, 1) != RES_OK) {
- res = FR_DISK_ERR;
- } else {
- fs->wflag = 0;
- if (wsect - fs->fatbase < fs->fsize) { /* Is it in the FAT area? */
- for (nf = fs->n_fats; nf >= 2; nf--) { /* Reflect the change to all FAT copies */
- wsect += fs->fsize;
- disk_write(fs->drv, fs->win, wsect, 1);
- }
+ if (disk_write(fs->drv, fs->win, wsect, 1))
+ return FR_DISK_ERR;
+ fs->wflag = 0;
+ if (wsect - fs->fatbase < fs->fsize) { /* Is it in the FAT area? */
+ for (nf = fs->n_fats; nf >= 2; nf--) { /* Reflect the change to all FAT copies */
+ wsect += fs->fsize;
+ disk_write(fs->drv, fs->win, wsect, 1);
}
}
}
- return res;
+ return FR_OK;
}
#endif
@@ -791,22 +783,17 @@ FRESULT move_window ( DWORD sector /* Sector number to make appearance in the fs->win[] */
)
{
- FRESULT res = FR_OK;
-
-
- if (sector != fs->winsect) { /* Window offset changed? */
+ if (sector != fs->winsect) { /* Changed current window */
#if !_FS_READONLY
- res = sync_window(fs); /* Write-back changes */
+ if (sync_window(fs) != FR_OK)
+ return FR_DISK_ERR;
#endif
- if (res == FR_OK) { /* Fill sector window with new data */
- if (disk_read(fs->drv, fs->win, sector, 1) != RES_OK) {
- sector = 0xFFFFFFFF; /* Invalidate window if data is not reliable */
- res = FR_DISK_ERR;
- }
- fs->winsect = sector;
- }
+ if (disk_read(fs->drv, fs->win, sector, 1))
+ return FR_DISK_ERR;
+ fs->winsect = sector;
}
- return res;
+
+ return FR_OK;
}
@@ -855,7 +842,7 @@ FRESULT sync_fs ( /* FR_OK: successful, FR_DISK_ERR: failed */ /*-----------------------------------------------------------------------*/
/* Get sector# from cluster# */
/*-----------------------------------------------------------------------*/
-/* Hidden API for hacks and disk tools */
+
DWORD clust2sect ( /* !=0: Sector number, 0: Failed - invalid cluster# */
FATFS* fs, /* File system object */
@@ -863,7 +850,7 @@ DWORD clust2sect ( /* !=0: Sector number, 0: Failed - invalid cluster# */ )
{
clst -= 2;
- if (clst >= fs->n_fatent - 2) return 0; /* Invalid cluster# */
+ if (clst >= (fs->n_fatent - 2)) return 0; /* Invalid cluster# */
return clst * fs->csize + fs->database;
}
@@ -873,52 +860,44 @@ DWORD clust2sect ( /* !=0: Sector number, 0: Failed - invalid cluster# */ /*-----------------------------------------------------------------------*/
/* FAT access - Read value of a FAT entry */
/*-----------------------------------------------------------------------*/
-/* Hidden API for hacks and disk tools */
-DWORD get_fat ( /* 0xFFFFFFFF:Disk error, 1:Internal error, 2..0x0FFFFFFF:Cluster status */
+
+DWORD get_fat ( /* 0xFFFFFFFF:Disk error, 1:Internal error, Else:Cluster status */
FATFS* fs, /* File system object */
- DWORD clst /* FAT item index (cluster#) to get the value */
+ DWORD clst /* Cluster# to get the link information */
)
{
UINT wc, bc;
BYTE *p;
- DWORD val;
- if (clst < 2 || clst >= fs->n_fatent) { /* Check range */
- val = 1; /* Internal error */
+ if (clst < 2 || clst >= fs->n_fatent) /* Check range */
+ return 1;
- } else {
- val = 0xFFFFFFFF; /* Default value falls on disk error */
+ switch (fs->fs_type) {
+ case FS_FAT12 :
+ bc = (UINT)clst; bc += bc / 2;
+ if (move_window(fs, fs->fatbase + (bc / SS(fs)))) break;
+ wc = fs->win[bc % SS(fs)]; bc++;
+ if (move_window(fs, fs->fatbase + (bc / SS(fs)))) break;
+ wc |= fs->win[bc % SS(fs)] << 8;
+ return clst & 1 ? wc >> 4 : (wc & 0xFFF);
- switch (fs->fs_type) {
- case FS_FAT12 :
- bc = (UINT)clst; bc += bc / 2;
- if (move_window(fs, fs->fatbase + (bc / SS(fs))) != FR_OK) break;
- wc = fs->win[bc++ % SS(fs)];
- if (move_window(fs, fs->fatbase + (bc / SS(fs))) != FR_OK) break;
- wc |= fs->win[bc % SS(fs)] << 8;
- val = clst & 1 ? wc >> 4 : (wc & 0xFFF);
- break;
+ case FS_FAT16 :
+ if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 2)))) break;
+ p = &fs->win[clst * 2 % SS(fs)];
+ return LD_WORD(p);
- case FS_FAT16 :
- if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 2))) != FR_OK) break;
- p = &fs->win[clst * 2 % SS(fs)];
- val = LD_WORD(p);
- break;
+ case FS_FAT32 :
+ if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 4)))) break;
+ p = &fs->win[clst * 4 % SS(fs)];
+ return LD_DWORD(p) & 0x0FFFFFFF;
- case FS_FAT32 :
- if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 4))) != FR_OK) break;
- p = &fs->win[clst * 4 % SS(fs)];
- val = LD_DWORD(p) & 0x0FFFFFFF;
- break;
-
- default:
- val = 1; /* Internal error */
- }
+ default:
+ return 1;
}
- return val;
+ return 0xFFFFFFFF; /* An error occurred at the disk I/O layer */
}
@@ -927,12 +906,11 @@ DWORD get_fat ( /* 0xFFFFFFFF:Disk error, 1:Internal error, 2..0x0FFFFFFF:Cluste /*-----------------------------------------------------------------------*/
/* FAT access - Change value of a FAT entry */
/*-----------------------------------------------------------------------*/
-/* Hidden API for hacks and disk tools */
-
#if !_FS_READONLY
+
FRESULT put_fat (
FATFS* fs, /* File system object */
- DWORD clst, /* FAT item index (cluster#) to be set */
+ DWORD clst, /* Cluster# to be changed in range of 2 to fs->n_fatent - 1 */
DWORD val /* New value to mark the cluster */
)
{
@@ -950,14 +928,14 @@ FRESULT put_fat ( bc = (UINT)clst; bc += bc / 2;
res = move_window(fs, fs->fatbase + (bc / SS(fs)));
if (res != FR_OK) break;
- p = &fs->win[bc++ % SS(fs)];
+ p = &fs->win[bc % SS(fs)];
*p = (clst & 1) ? ((*p & 0x0F) | ((BYTE)val << 4)) : (BYTE)val;
+ bc++;
fs->wflag = 1;
res = move_window(fs, fs->fatbase + (bc / SS(fs)));
if (res != FR_OK) break;
p = &fs->win[bc % SS(fs)];
*p = (clst & 1) ? (BYTE)(val >> 4) : ((*p & 0xF0) | ((BYTE)(val >> 8) & 0x0F));
- fs->wflag = 1;
break;
case FS_FAT16 :
@@ -965,7 +943,6 @@ FRESULT put_fat ( if (res != FR_OK) break;
p = &fs->win[clst * 2 % SS(fs)];
ST_WORD(p, (WORD)val);
- fs->wflag = 1;
break;
case FS_FAT32 :
@@ -974,12 +951,12 @@ FRESULT put_fat ( p = &fs->win[clst * 4 % SS(fs)];
val |= LD_DWORD(p) & 0xF0000000;
ST_DWORD(p, val);
- fs->wflag = 1;
break;
default :
res = FR_INT_ERR;
}
+ fs->wflag = 1;
}
return res;
@@ -1001,7 +978,7 @@ FRESULT remove_chain ( {
FRESULT res;
DWORD nxt;
-#if _USE_TRIM
+#if _USE_ERASE
DWORD scl = clst, ecl = clst, rt[2];
#endif
@@ -1021,13 +998,13 @@ FRESULT remove_chain ( fs->free_clust++;
fs->fsi_flag |= 1;
}
-#if _USE_TRIM
+#if _USE_ERASE
if (ecl + 1 == nxt) { /* Is next cluster contiguous? */
ecl = nxt;
} else { /* End of contiguous clusters */
rt[0] = clust2sect(fs, scl); /* Start sector */
rt[1] = clust2sect(fs, ecl) + fs->csize - 1; /* End sector */
- disk_ioctl(fs->drv, CTRL_TRIM, rt); /* Erase the block */
+ disk_ioctl(fs->drv, CTRL_ERASE_SECTOR, rt); /* Erase the block */
scl = ecl = nxt;
}
#endif
@@ -1269,8 +1246,8 @@ FRESULT dir_alloc ( do {
res = move_window(dp->fs, dp->sect);
if (res != FR_OK) break;
- if (dp->dir[0] == DDE || dp->dir[0] == 0) { /* Is it a free entry? */
- if (++n == nent) break; /* A block of contiguous free entries is found */
+ if (dp->dir[0] == DDE || dp->dir[0] == 0) { /* Is it a blank entry? */
+ if (++n == nent) break; /* A block of contiguous entries is found */
} else {
n = 0; /* Not a blank entry. Restart to search */
}
@@ -1549,7 +1526,7 @@ FRESULT dir_find ( }
} else { /* An SFN entry is found */
if (!ord && sum == sum_sfn(dir)) break; /* LFN matched? */
- if (!(dp->fn[NSFLAG] & NS_LOSS) && !mem_cmp(dir, dp->fn, 11)) break; /* SFN matched? */
+ if (!(dp->fn[NS] & NS_LOSS) && !mem_cmp(dir, dp->fn, 11)) break; /* SFN matched? */
ord = 0xFF; dp->lfn_idx = 0xFFFF; /* Reset LFN sequence */
}
}
@@ -1591,7 +1568,7 @@ FRESULT dir_read ( if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */
a = dir[DIR_Attr] & AM_MASK;
#if _USE_LFN /* LFN configuration */
- if (c == DDE || (!_FS_RPATH && c == '.') || (int)((a & ~AM_ARC) == AM_VOL) != vol) { /* An entry without valid data */
+ if (c == DDE || (!_FS_RPATH && c == '.') || (int)(a == AM_VOL) != vol) { /* An entry without valid data */
ord = 0xFF;
} else {
if (a == AM_LFN) { /* An LFN entry is found */
@@ -1609,7 +1586,7 @@ FRESULT dir_read ( }
}
#else /* Non LFN configuration */
- if (c != DDE && (_FS_RPATH || c != '.') && a != AM_LFN && (int)((a & ~AM_ARC) == AM_VOL) == vol) /* Is it a valid entry? */
+ if (c != DDE && (_FS_RPATH || c != '.') && a != AM_LFN && (int)(a == AM_VOL) == vol) /* Is it a valid entry? */
break;
#endif
res = dir_next(dp, 0); /* Next entry */
@@ -1644,11 +1621,11 @@ FRESULT dir_register ( /* FR_OK:Successful, FR_DENIED:No free entry or too many fn = dp->fn; lfn = dp->lfn;
mem_cpy(sn, fn, 12);
- if (_FS_RPATH && (sn[NSFLAG] & NS_DOT)) /* Cannot create dot entry */
+ if (_FS_RPATH && (sn[NS] & NS_DOT)) /* Cannot create dot entry */
return FR_INVALID_NAME;
- if (sn[NSFLAG] & NS_LOSS) { /* When LFN is out of 8.3 format, generate a numbered name */
- fn[NSFLAG] = 0; dp->lfn = 0; /* Find only SFN */
+ if (sn[NS] & NS_LOSS) { /* When LFN is out of 8.3 format, generate a numbered name */
+ fn[NS] = 0; dp->lfn = 0; /* Find only SFN */
for (n = 1; n < 100; n++) {
gen_numname(fn, sn, lfn, n); /* Generate a numbered name */
res = dir_find(dp); /* Check if the name collides with existing SFN */
@@ -1656,10 +1633,10 @@ FRESULT dir_register ( /* FR_OK:Successful, FR_DENIED:No free entry or too many }
if (n == 100) return FR_DENIED; /* Abort if too many collisions */
if (res != FR_NO_FILE) return res; /* Abort if the result is other than 'not collided' */
- fn[NSFLAG] = sn[NSFLAG]; dp->lfn = lfn;
+ fn[NS] = sn[NS]; dp->lfn = lfn;
}
- if (sn[NSFLAG] & NS_LFN) { /* When LFN is to be created, allocate entries for an SFN + LFNs. */
+ if (sn[NS] & NS_LFN) { /* When LFN is to be created, allocate entries for an SFN + LFNs. */
for (n = 0; lfn[n]; n++) ;
nent = (n + 25) / 13;
} else { /* Otherwise allocate an entry for an SFN */
@@ -1690,7 +1667,7 @@ FRESULT dir_register ( /* FR_OK:Successful, FR_DENIED:No free entry or too many mem_set(dp->dir, 0, SZ_DIR); /* Clean the entry */
mem_cpy(dp->dir, dp->fn, 11); /* Put SFN */
#if _USE_LFN
- dp->dir[DIR_NTres] = dp->fn[NSFLAG] & (NS_BODY | NS_EXT); /* Put NT flag */
+ dp->dir[DIR_NTres] = dp->fn[NS] & (NS_BODY | NS_EXT); /* Put NT flag */
#endif
dp->fs->wflag = 1;
}
@@ -1946,7 +1923,7 @@ FRESULT create_name ( if ((b & 0x0C) == 0x04) cf |= NS_BODY; /* NT flag (Filename has only small capital) */
}
- dp->fn[NSFLAG] = cf; /* SFN is created */
+ dp->fn[NS] = cf; /* SFN is created */
return FR_OK;
@@ -1970,7 +1947,7 @@ FRESULT create_name ( }
if (c != '/' && c != '\\' && c > ' ') return FR_INVALID_NAME;
*path = &p[si]; /* Return pointer to the next segment */
- sfn[NSFLAG] = (c <= ' ') ? NS_LAST | NS_DOT : NS_DOT; /* Set last segment flag if end of path */
+ sfn[NS] = (c <= ' ') ? NS_LAST | NS_DOT : NS_DOT; /* Set last segment flag if end of path */
return FR_OK;
}
#endif
@@ -2021,7 +1998,7 @@ FRESULT create_name ( if ((b & 0x03) == 0x01) c |= NS_EXT; /* NT flag (Name extension has only small capital) */
if ((b & 0x0C) == 0x04) c |= NS_BODY; /* NT flag (Name body has only small capital) */
- sfn[NSFLAG] = c; /* Store NT flag, File name is created */
+ sfn[NS] = c; /* Store NT flag, File name is created */
return FR_OK;
#endif
@@ -2064,7 +2041,7 @@ FRESULT follow_path ( /* FR_OK(0): successful, !=0: error code */ res = create_name(dp, &path); /* Get a segment name of the path */
if (res != FR_OK) break;
res = dir_find(dp); /* Find an object with the sagment name */
- ns = dp->fn[NSFLAG];
+ ns = dp->fn[NS];
if (res != FR_OK) { /* Failed to find the object */
if (res == FR_NO_FILE) { /* Object is not found */
if (_FS_RPATH && (ns & NS_DOT)) { /* If dot entry is not exist, */
@@ -2306,7 +2283,7 @@ FRESULT find_volume ( /* FR_OK(0): successful, !=0: any error occurred */ szbfat = (fmt == FS_FAT16) ? /* (Needed FAT size) */
fs->n_fatent * 2 : fs->n_fatent * 3 / 2 + (fs->n_fatent & 1);
}
- if (fs->fsize < (szbfat + (SS(fs) - 1)) / SS(fs)) /* (BPB_FATSz must not be less than the size needed) */
+ if (fs->fsize < (szbfat + (SS(fs) - 1)) / SS(fs)) /* (BPB_FATSz must not be less than needed) */
return FR_NO_FILESYSTEM;
#if !_FS_READONLY
@@ -2494,7 +2471,7 @@ FRESULT f_open ( }
}
if (res == FR_OK && (mode & FA_CREATE_ALWAYS)) { /* Truncate it if overwrite mode */
- dw = GET_FATTIME(); /* Created time */
+ dw = get_fattime(); /* Created time */
ST_DWORD(dir+DIR_CrtTime, dw);
dir[DIR_Attr] = 0; /* Reset attribute */
ST_DWORD(dir+DIR_FileSize, 0); /* size = 0 */
@@ -2620,7 +2597,7 @@ FRESULT f_read ( if (cc) { /* Read maximum contiguous sectors directly */
if (csect + cc > fp->fs->csize) /* Clip at cluster boundary */
cc = fp->fs->csize - csect;
- if (disk_read(fp->fs->drv, rbuff, sect, cc) != RES_OK)
+ if (disk_read(fp->fs->drv, rbuff, sect, cc))
ABORT(fp->fs, FR_DISK_ERR);
#if !_FS_READONLY && _FS_MINIMIZE <= 2 /* Replace one of the read sectors with cached data if it contains a dirty sector */
#if _FS_TINY
@@ -2638,12 +2615,12 @@ FRESULT f_read ( if (fp->dsect != sect) { /* Load data sector if not in cache */
#if !_FS_READONLY
if (fp->flag & FA__DIRTY) { /* Write-back dirty sector cache */
- if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
+ if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1))
ABORT(fp->fs, FR_DISK_ERR);
fp->flag &= ~FA__DIRTY;
}
#endif
- if (disk_read(fp->fs->drv, fp->buf, sect, 1) != RES_OK) /* Fill sector cache */
+ if (disk_read(fp->fs->drv, fp->buf, sect, 1)) /* Fill sector cache */
ABORT(fp->fs, FR_DISK_ERR);
}
#endif
@@ -2652,7 +2629,7 @@ FRESULT f_read ( rcnt = SS(fp->fs) - ((UINT)fp->fptr % SS(fp->fs)); /* Get partial sector data from sector buffer */
if (rcnt > btr) rcnt = btr;
#if _FS_TINY
- if (move_window(fp->fs, fp->dsect) != FR_OK) /* Move sector window */
+ if (move_window(fp->fs, fp->dsect)) /* Move sector window */
ABORT(fp->fs, FR_DISK_ERR);
mem_cpy(rbuff, &fp->fs->win[fp->fptr % SS(fp->fs)], rcnt); /* Pick partial sector */
#else
@@ -2723,7 +2700,7 @@ FRESULT f_write ( ABORT(fp->fs, FR_DISK_ERR);
#else
if (fp->flag & FA__DIRTY) { /* Write-back sector cache */
- if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
+ if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1))
ABORT(fp->fs, FR_DISK_ERR);
fp->flag &= ~FA__DIRTY;
}
@@ -2735,7 +2712,7 @@ FRESULT f_write ( if (cc) { /* Write maximum contiguous sectors directly */
if (csect + cc > fp->fs->csize) /* Clip at cluster boundary */
cc = fp->fs->csize - csect;
- if (disk_write(fp->fs->drv, wbuff, sect, cc) != RES_OK)
+ if (disk_write(fp->fs->drv, wbuff, sect, cc))
ABORT(fp->fs, FR_DISK_ERR);
#if _FS_MINIMIZE <= 2
#if _FS_TINY
@@ -2761,7 +2738,7 @@ FRESULT f_write ( #else
if (fp->dsect != sect) { /* Fill sector cache with file data */
if (fp->fptr < fp->fsize &&
- disk_read(fp->fs->drv, fp->buf, sect, 1) != RES_OK)
+ disk_read(fp->fs->drv, fp->buf, sect, 1))
ABORT(fp->fs, FR_DISK_ERR);
}
#endif
@@ -2770,7 +2747,7 @@ FRESULT f_write ( wcnt = SS(fp->fs) - ((UINT)fp->fptr % SS(fp->fs));/* Put partial sector into file I/O buffer */
if (wcnt > btw) wcnt = btw;
#if _FS_TINY
- if (move_window(fp->fs, fp->dsect) != FR_OK) /* Move sector window */
+ if (move_window(fp->fs, fp->dsect)) /* Move sector window */
ABORT(fp->fs, FR_DISK_ERR);
mem_cpy(&fp->fs->win[fp->fptr % SS(fp->fs)], wbuff, wcnt); /* Fit partial sector */
fp->fs->wflag = 1;
@@ -2808,7 +2785,7 @@ FRESULT f_sync ( /* Write-back dirty buffer */
#if !_FS_TINY
if (fp->flag & FA__DIRTY) {
- if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
+ if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1))
LEAVE_FF(fp->fs, FR_DISK_ERR);
fp->flag &= ~FA__DIRTY;
}
@@ -2820,7 +2797,7 @@ FRESULT f_sync ( dir[DIR_Attr] |= AM_ARC; /* Set archive bit */
ST_DWORD(dir+DIR_FileSize, fp->fsize); /* Update file size */
st_clust(dir, fp->sclust); /* Update start cluster */
- tm = GET_FATTIME(); /* Update updated time */
+ tm = get_fattime(); /* Update updated time */
ST_DWORD(dir+DIR_WrtTime, tm);
ST_WORD(dir+DIR_LstAccDate, 0);
fp->flag &= ~FA__WRITTEN;
@@ -3069,12 +3046,12 @@ FRESULT f_lseek ( #if !_FS_TINY
#if !_FS_READONLY
if (fp->flag & FA__DIRTY) { /* Write-back dirty sector cache */
- if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
+ if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1))
ABORT(fp->fs, FR_DISK_ERR);
fp->flag &= ~FA__DIRTY;
}
#endif
- if (disk_read(fp->fs->drv, fp->buf, dsc, 1) != RES_OK) /* Load current sector */
+ if (disk_read(fp->fs->drv, fp->buf, dsc, 1)) /* Load current sector */
ABORT(fp->fs, FR_DISK_ERR);
#endif
fp->dsect = dsc;
@@ -3144,12 +3121,12 @@ FRESULT f_lseek ( #if !_FS_TINY
#if !_FS_READONLY
if (fp->flag & FA__DIRTY) { /* Write-back dirty sector cache */
- if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
+ if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1))
ABORT(fp->fs, FR_DISK_ERR);
fp->flag &= ~FA__DIRTY;
}
#endif
- if (disk_read(fp->fs->drv, fp->buf, nsect, 1) != RES_OK) /* Fill sector cache */
+ if (disk_read(fp->fs->drv, fp->buf, nsect, 1)) /* Fill sector cache */
ABORT(fp->fs, FR_DISK_ERR);
#endif
fp->dsect = nsect;
@@ -3440,7 +3417,7 @@ FRESULT f_truncate ( }
#if !_FS_TINY
if (res == FR_OK && (fp->flag & FA__DIRTY)) {
- if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
+ if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1))
res = FR_DISK_ERR;
else
fp->flag &= ~FA__DIRTY;
@@ -3467,7 +3444,7 @@ FRESULT f_unlink ( FRESULT res;
DIR dj, sdj;
BYTE *dir;
- DWORD dclst = 0;
+ DWORD dclst;
DEF_NAMEBUF;
@@ -3476,46 +3453,45 @@ FRESULT f_unlink ( if (res == FR_OK) {
INIT_BUF(dj);
res = follow_path(&dj, path); /* Follow the file path */
- if (_FS_RPATH && res == FR_OK && (dj.fn[NSFLAG] & NS_DOT))
+ if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT))
res = FR_INVALID_NAME; /* Cannot remove dot entry */
#if _FS_LOCK
- if (res == FR_OK) res = chk_lock(&dj, 2); /* Cannot remove open object */
+ if (res == FR_OK) res = chk_lock(&dj, 2); /* Cannot remove open file */
#endif
if (res == FR_OK) { /* The object is accessible */
dir = dj.dir;
if (!dir) {
- res = FR_INVALID_NAME; /* Cannot remove the origin directory */
+ res = FR_INVALID_NAME; /* Cannot remove the start directory */
} else {
if (dir[DIR_Attr] & AM_RDO)
res = FR_DENIED; /* Cannot remove R/O object */
}
- //if (res == FR_OK && (dir[DIR_Attr] & AM_DIR)) { /* Is it a sub-dir? */
- if (res == FR_OK) {
- dclst = ld_clust(dj.fs, dir);
- if (dir[DIR_Attr] & AM_DIR) { /* Is it a sub-dir? */
- if (!dclst) {
- res = FR_INT_ERR;
- } else { /* Make sure the sub-directory is empty */
- mem_cpy(&sdj, &dj, sizeof (DIR));
- sdj.sclust = dclst;
- res = dir_sdi(&sdj, 2); /* Exclude dot entries */
- if (res == FR_OK) {
- res = dir_read(&sdj, 0); /* Read an item */
- if (res == FR_OK /* Not empty directory */
+ dclst = ld_clust(dj.fs, dir);
+ if (res == FR_OK && (dir[DIR_Attr] & AM_DIR)) { /* Is it a sub-dir? */
+ if (dclst < 2) {
+ res = FR_INT_ERR;
+ } else {
+ mem_cpy(&sdj, &dj, sizeof (DIR)); /* Check if the sub-directory is empty or not */
+ sdj.sclust = dclst;
+ res = dir_sdi(&sdj, 2); /* Exclude dot entries */
+ if (res == FR_OK) {
+ res = dir_read(&sdj, 0); /* Read an item */
+ if (res == FR_OK /* Not empty directory */
#if _FS_RPATH
- || dclst == dj.fs->cdir /* or current directory */
+ || dclst == dj.fs->cdir /* Current directory */
#endif
- ) res = FR_DENIED;
- if (res == FR_NO_FILE) res = FR_OK; /* It is empty */
- }
+ ) res = FR_DENIED;
+ if (res == FR_NO_FILE) res = FR_OK; /* Empty */
}
}
}
if (res == FR_OK) {
res = dir_remove(&dj); /* Remove the directory entry */
- if (res == FR_OK && dclst) /* Remove the cluster chain if exist */
- res = remove_chain(dj.fs, dclst);
- if (res == FR_OK) res = sync_fs(dj.fs);
+ if (res == FR_OK) {
+ if (dclst) /* Remove the cluster chain if exist */
+ res = remove_chain(dj.fs, dclst);
+ if (res == FR_OK) res = sync_fs(dj.fs);
+ }
}
}
FREE_BUF();
@@ -3538,7 +3514,7 @@ FRESULT f_mkdir ( FRESULT res;
DIR dj;
BYTE *dir, n;
- DWORD dsc, dcl, pcl, tm = GET_FATTIME();
+ DWORD dsc, dcl, pcl, tm = get_fattime();
DEF_NAMEBUF;
@@ -3548,7 +3524,7 @@ FRESULT f_mkdir ( INIT_BUF(dj);
res = follow_path(&dj, path); /* Follow the file path */
if (res == FR_OK) res = FR_EXIST; /* Any object with same name is already existing */
- if (_FS_RPATH && res == FR_NO_FILE && (dj.fn[NSFLAG] & NS_DOT))
+ if (_FS_RPATH && res == FR_NO_FILE && (dj.fn[NS] & NS_DOT))
res = FR_INVALID_NAME;
if (res == FR_NO_FILE) { /* Can create a new directory */
dcl = create_chain(dj.fs, 0); /* Allocate a cluster for the new directory table */
@@ -3623,7 +3599,7 @@ FRESULT f_chmod ( INIT_BUF(dj);
res = follow_path(&dj, path); /* Follow the file path */
FREE_BUF();
- if (_FS_RPATH && res == FR_OK && (dj.fn[NSFLAG] & NS_DOT))
+ if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT))
res = FR_INVALID_NAME;
if (res == FR_OK) {
dir = dj.dir;
@@ -3645,6 +3621,48 @@ FRESULT f_chmod ( /*-----------------------------------------------------------------------*/
+/* Change Timestamp */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_utime (
+ const TCHAR* path, /* Pointer to the file/directory name */
+ const FILINFO* fno /* Pointer to the time stamp to be set */
+)
+{
+ FRESULT res;
+ DIR dj;
+ BYTE *dir;
+ DEF_NAMEBUF;
+
+
+ /* Get logical drive number */
+ res = find_volume(&dj.fs, &path, 1);
+ if (res == FR_OK) {
+ INIT_BUF(dj);
+ res = follow_path(&dj, path); /* Follow the file path */
+ FREE_BUF();
+ if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT))
+ res = FR_INVALID_NAME;
+ if (res == FR_OK) {
+ dir = dj.dir;
+ if (!dir) { /* Root directory */
+ res = FR_INVALID_NAME;
+ } else { /* File or sub-directory */
+ ST_WORD(dir+DIR_WrtTime, fno->ftime);
+ ST_WORD(dir+DIR_WrtDate, fno->fdate);
+ dj.fs->wflag = 1;
+ res = sync_fs(dj.fs);
+ }
+ }
+ }
+
+ LEAVE_FF(dj.fs, res);
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
/* Rename File/Directory */
/*-----------------------------------------------------------------------*/
@@ -3666,7 +3684,7 @@ FRESULT f_rename ( djn.fs = djo.fs;
INIT_BUF(djo);
res = follow_path(&djo, path_old); /* Check old object */
- if (_FS_RPATH && res == FR_OK && (djo.fn[NSFLAG] & NS_DOT))
+ if (_FS_RPATH && res == FR_OK && (djo.fn[NS] & NS_DOT))
res = FR_INVALID_NAME;
#if _FS_LOCK
if (res == FR_OK) res = chk_lock(&djo, 2);
@@ -3678,19 +3696,19 @@ FRESULT f_rename ( mem_cpy(buf, djo.dir+DIR_Attr, 21); /* Save the object information except name */
mem_cpy(&djn, &djo, sizeof (DIR)); /* Duplicate the directory object */
if (get_ldnumber(&path_new) >= 0) /* Snip drive number off and ignore it */
- res = follow_path(&djn, path_new); /* and make sure if new object name is not conflicting */
+ res = follow_path(&djn, path_new); /* and check if new object is exist */
else
res = FR_INVALID_DRIVE;
if (res == FR_OK) res = FR_EXIST; /* The new object name is already existing */
- if (res == FR_NO_FILE) { /* It is a valid path and no name collision */
-/* Start of critical section that any interruption can cause a cross-link */
+ if (res == FR_NO_FILE) { /* Is it a valid path and no name collision? */
+/* Start critical section that any interruption can cause a cross-link */
res = dir_register(&djn); /* Register the new entry */
if (res == FR_OK) {
dir = djn.dir; /* Copy object information except name */
mem_cpy(dir+13, buf+2, 19);
dir[DIR_Attr] = buf[0] | AM_ARC;
djo.fs->wflag = 1;
- if ((dir[DIR_Attr] & AM_DIR) && djo.sclust != djn.sclust) { /* Update .. entry in the directory if needed */
+ if (djo.sclust != djn.sclust && (dir[DIR_Attr] & AM_DIR)) { /* Update .. entry in the directory if needed */
dw = clust2sect(djo.fs, ld_clust(djo.fs, dir));
if (!dw) {
res = FR_INT_ERR;
@@ -3698,7 +3716,8 @@ FRESULT f_rename ( res = move_window(djo.fs, dw);
dir = djo.fs->win+SZ_DIR; /* .. entry */
if (res == FR_OK && dir[1] == '.') {
- st_clust(dir, djn.sclust);
+ dw = (djo.fs->fs_type == FS_FAT32 && djn.sclust == djo.fs->dirbase) ? 0 : djn.sclust;
+ st_clust(dir, dw);
djo.fs->wflag = 1;
}
}
@@ -3709,7 +3728,7 @@ FRESULT f_rename ( res = sync_fs(djo.fs);
}
}
-/* End of critical section */
+/* End critical section */
}
}
}
@@ -3719,48 +3738,6 @@ FRESULT f_rename ( LEAVE_FF(djo.fs, res);
}
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Change Timestamp */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_utime (
- const TCHAR* path, /* Pointer to the file/directory name */
- const FILINFO* fno /* Pointer to the time stamp to be set */
-)
-{
- FRESULT res;
- DIR dj;
- BYTE *dir;
- DEF_NAMEBUF;
-
-
- /* Get logical drive number */
- res = find_volume(&dj.fs, &path, 1);
- if (res == FR_OK) {
- INIT_BUF(dj);
- res = follow_path(&dj, path); /* Follow the file path */
- FREE_BUF();
- if (_FS_RPATH && res == FR_OK && (dj.fn[NSFLAG] & NS_DOT))
- res = FR_INVALID_NAME;
- if (res == FR_OK) {
- dir = dj.dir;
- if (!dir) { /* Root directory */
- res = FR_INVALID_NAME;
- } else { /* File or sub-directory */
- ST_WORD(dir+DIR_WrtTime, fno->ftime);
- ST_WORD(dir+DIR_WrtDate, fno->fdate);
- dj.fs->wflag = 1;
- res = sync_fs(dj.fs);
- }
- }
- }
-
- LEAVE_FF(dj.fs, res);
-}
-
#endif /* !_FS_READONLY */
#endif /* _FS_MINIMIZE == 0 */
#endif /* _FS_MINIMIZE <= 1 */
@@ -3894,7 +3871,7 @@ FRESULT f_setlabel ( if (res == FR_OK) { /* A volume label is found */
if (vn[0]) {
mem_cpy(dj.dir, vn, 11); /* Change the volume label name */
- tm = GET_FATTIME();
+ tm = get_fattime();
ST_DWORD(dj.dir+DIR_WrtTime, tm);
} else {
dj.dir[0] = DDE; /* Remove the volume label */
@@ -3910,7 +3887,7 @@ FRESULT f_setlabel ( mem_set(dj.dir, 0, SZ_DIR); /* Set volume label */
mem_cpy(dj.dir, vn, 11);
dj.dir[DIR_Attr] = AM_VOL;
- tm = GET_FATTIME();
+ tm = get_fattime();
ST_DWORD(dj.dir+DIR_WrtTime, tm);
dj.fs->wflag = 1;
res = sync_fs(dj.fs);
@@ -3973,7 +3950,7 @@ FRESULT f_forward ( sect = clust2sect(fp->fs, fp->clust); /* Get current data sector */
if (!sect) ABORT(fp->fs, FR_INT_ERR);
sect += csect;
- if (move_window(fp->fs, sect) != FR_OK) /* Move sector window */
+ if (move_window(fp->fs, sect)) /* Move sector window */
ABORT(fp->fs, FR_DISK_ERR);
fp->dsect = sect;
rcnt = SS(fp->fs) - (WORD)(fp->fptr % SS(fp->fs)); /* Forward data from sector window */
@@ -3993,13 +3970,13 @@ FRESULT f_forward ( /* Create File System on the Drive */
/*-----------------------------------------------------------------------*/
#define N_ROOTDIR 512 /* Number of root directory entries for FAT12/16 */
-#define N_FATS 1 /* Number of FATs (1 or 2) */
+#define N_FATS 1 /* Number of FAT copies (1 or 2) */
FRESULT f_mkfs (
const TCHAR* path, /* Logical drive number */
BYTE sfd, /* Partitioning rule 0:FDISK, 1:SFD */
- UINT au /* Size of allocation unit in unit of byte or sector */
+ UINT au /* Allocation unit [bytes] */
)
{
static const WORD vst[] = { 1024, 512, 256, 128, 64, 32, 16, 8, 4, 2, 0};
@@ -4015,9 +3992,10 @@ FRESULT f_mkfs ( /* Check mounted drive and clear work area */
- if (sfd > 1) return FR_INVALID_PARAMETER;
vol = get_ldnumber(&path);
if (vol < 0) return FR_INVALID_DRIVE;
+ if (sfd > 1) return FR_INVALID_PARAMETER;
+ if (au & (au - 1)) return FR_INVALID_PARAMETER;
fs = FatFs[vol];
if (!fs) return FR_NOT_ENABLED;
fs->fs_type = 0;
@@ -4034,7 +4012,7 @@ FRESULT f_mkfs ( #endif
if (_MULTI_PARTITION && part) {
/* Get partition information from partition table in the MBR */
- if (disk_read(pdrv, fs->win, 0, 1) != RES_OK) return FR_DISK_ERR;
+ if (disk_read(pdrv, fs->win, 0, 1)) return FR_DISK_ERR;
if (LD_WORD(fs->win+BS_55AA) != 0xAA55) return FR_MKFS_ABORTED;
tbl = &fs->win[MBR_Table + (part - 1) * SZ_PTE];
if (!tbl[4]) return FR_MKFS_ABORTED; /* No partition? */
@@ -4048,14 +4026,13 @@ FRESULT f_mkfs ( n_vol -= b_vol; /* Volume size */
}
- if (au & (au - 1)) au = 0;
- if (!au) { /* AU auto selection */
+ if (!au) { /* AU auto selection */
vs = n_vol / (2000 / (SS(fs) / 512));
for (i = 0; vs < vst[i]; i++) ;
au = cst[i];
}
- if (au >= _MIN_SS) au /= SS(fs); /* Number of sectors per cluster */
- if (!au) au = 1;
+ au /= SS(fs); /* Number of sectors per cluster */
+ if (au == 0) au = 1;
if (au > 128) au = 128;
/* Pre-compute number of clusters and FAT sub-type */
@@ -4112,7 +4089,7 @@ FRESULT f_mkfs ( /* Update system ID in the partition table */
tbl = &fs->win[MBR_Table + (part - 1) * SZ_PTE];
tbl[4] = sys;
- if (disk_write(pdrv, fs->win, 0, 1) != RES_OK) /* Write it to teh MBR */
+ if (disk_write(pdrv, fs->win, 0, 1)) /* Write it to teh MBR */
return FR_DISK_ERR;
md = 0xF8;
} else {
@@ -4132,7 +4109,7 @@ FRESULT f_mkfs ( ST_DWORD(tbl+8, 63); /* Partition start in LBA */
ST_DWORD(tbl+12, n_vol); /* Partition size in LBA */
ST_WORD(fs->win+BS_55AA, 0xAA55); /* MBR signature */
- if (disk_write(pdrv, fs->win, 0, 1) != RES_OK) /* Write it to the MBR */
+ if (disk_write(pdrv, fs->win, 0, 1)) /* Write it to the MBR */
return FR_DISK_ERR;
md = 0xF8;
}
@@ -4158,7 +4135,7 @@ FRESULT f_mkfs ( ST_WORD(tbl+BPB_SecPerTrk, 63); /* Number of sectors per track */
ST_WORD(tbl+BPB_NumHeads, 255); /* Number of heads */
ST_DWORD(tbl+BPB_HiddSec, b_vol); /* Hidden sectors */
- n = GET_FATTIME(); /* Use current time as VSN */
+ n = get_fattime(); /* Use current time as VSN */
if (fmt == FS_FAT32) {
ST_DWORD(tbl+BS_VolID32, n); /* VSN */
ST_DWORD(tbl+BPB_FATSz32, n_fat); /* Number of sectors per FAT */
@@ -4176,7 +4153,7 @@ FRESULT f_mkfs ( mem_cpy(tbl+BS_VolLab, "NO NAME " "FAT ", 19); /* Volume label, FAT signature */
}
ST_WORD(tbl+BS_55AA, 0xAA55); /* Signature (Offset is fixed here regardless of sector size) */
- if (disk_write(pdrv, tbl, b_vol, 1) != RES_OK) /* Write it to the VBR sector */
+ if (disk_write(pdrv, tbl, b_vol, 1)) /* Write it to the VBR sector */
return FR_DISK_ERR;
if (fmt == FS_FAT32) /* Write backup VBR if needed (VBR+6) */
disk_write(pdrv, tbl, b_vol + 6, 1);
@@ -4195,11 +4172,11 @@ FRESULT f_mkfs ( ST_DWORD(tbl+4, 0xFFFFFFFF);
ST_DWORD(tbl+8, 0x0FFFFFFF); /* Reserve cluster #2 for root directory */
}
- if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK)
+ if (disk_write(pdrv, tbl, wsect++, 1))
return FR_DISK_ERR;
mem_set(tbl, 0, SS(fs)); /* Fill following FAT entries with zero */
for (n = 1; n < n_fat; n++) { /* This loop may take a time on FAT32 volume due to many single sector writes */
- if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK)
+ if (disk_write(pdrv, tbl, wsect++, 1))
return FR_DISK_ERR;
}
}
@@ -4207,16 +4184,16 @@ FRESULT f_mkfs ( /* Initialize root directory */
i = (fmt == FS_FAT32) ? au : (UINT)n_dir;
do {
- if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK)
+ if (disk_write(pdrv, tbl, wsect++, 1))
return FR_DISK_ERR;
} while (--i);
-#if _USE_TRIM /* Erase data area if needed */
+#if _USE_ERASE /* Erase data area if needed */
{
DWORD eb[2];
eb[0] = wsect; eb[1] = wsect + (n_clst - ((fmt == FS_FAT32) ? 1 : 0)) * au - 1;
- disk_ioctl(pdrv, CTRL_TRIM, eb);
+ disk_ioctl(pdrv, CTRL_ERASE_SECTOR, eb);
}
#endif
@@ -4299,7 +4276,7 @@ FRESULT f_fdisk ( ST_WORD(p, 0xAA55);
/* Write it to the MBR */
- return (disk_write(pdrv, buf, 0, 1) != RES_OK || disk_ioctl(pdrv, CTRL_SYNC, 0) != RES_OK) ? FR_DISK_ERR : FR_OK;
+ return (disk_write(pdrv, buf, 0, 1) || disk_ioctl(pdrv, CTRL_SYNC, 0)) ? FR_DISK_ERR : FR_OK;
}
diff --git a/testhal/STM32/STM32F4xx/USB_HOST/ff.h b/testhal/STM32/STM32F4xx/USB_HOST/ff.h index 5eaad5f..9894921 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/ff.h +++ b/testhal/STM32/STM32F4xx/USB_HOST/ff.h @@ -1,5 +1,5 @@ /*---------------------------------------------------------------------------/
-/ FatFs - FAT file system module include file R0.10c (C)ChaN, 2014
+/ FatFs - FAT file system module include file R0.10b (C)ChaN, 2014
/----------------------------------------------------------------------------/
/ FatFs module is a generic FAT file system module for small embedded systems.
/ This is a free software that opened for education, research and commercial
@@ -15,7 +15,7 @@ /----------------------------------------------------------------------------*/
#ifndef _FATFS
-#define _FATFS 80376 /* Revision ID */
+#define _FATFS 8051 /* Revision ID */
#ifdef __cplusplus
extern "C" {
@@ -23,6 +23,7 @@ extern "C" { #include "integer.h" /* Basic integer types */
#include "ffconf.h" /* FatFs configuration options */
+
#if _FATFS != _FFCONF
#error Wrong configuration file (ffconf.h).
#endif
@@ -235,7 +236,7 @@ int f_puts (const TCHAR* str, FIL* cp); /* Put a string to the file */ int f_printf (FIL* fp, const TCHAR* str, ...); /* Put a formatted string to the file */
TCHAR* f_gets (TCHAR* buff, int len, FIL* fp); /* Get a string from the file */
-#define f_eof(fp) ((int)((fp)->fptr == (fp)->fsize))
+#define f_eof(fp) (((fp)->fptr == (fp)->fsize) ? 1 : 0)
#define f_error(fp) ((fp)->err)
#define f_tell(fp) ((fp)->fptr)
#define f_size(fp) ((fp)->fsize)
@@ -251,7 +252,7 @@ TCHAR* f_gets (TCHAR* buff, int len, FIL* fp); /* Get a string from the fil /* Additional user defined functions */
/* RTC function */
-#if !_FS_READONLY && !_FS_NORTC
+#if !_FS_READONLY
DWORD get_fattime (void);
#endif
diff --git a/testhal/STM32/STM32F4xx/USB_HOST/ffconf.h b/testhal/STM32/STM32F4xx/USB_HOST/ffconf.h index 0ae6f01..2af5efe 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/ffconf.h +++ b/testhal/STM32/STM32F4xx/USB_HOST/ffconf.h @@ -1,31 +1,33 @@ +/* CHIBIOS FIX */
+#include "ch.h"
+
/*---------------------------------------------------------------------------/
-/ FatFs - FAT file system module configuration file R0.10c (C)ChaN, 2014
+/ FatFs - FAT file system module configuration file R0.10b (C)ChaN, 2014
/---------------------------------------------------------------------------*/
-#include "ch.h"
-#define _FFCONF 80376 /* Revision ID */
+#ifndef _FFCONF
+#define _FFCONF 8051 /* Revision ID */
+
/*---------------------------------------------------------------------------/
/ Functions and Buffer Configurations
/---------------------------------------------------------------------------*/
-#define _FS_TINY 0
-/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
-/ At the tiny configuration, size of the file object (FIL) is reduced _MAX_SS
-/ bytes. Instead of private sector buffer eliminated from the file object,
-/ common sector buffer in the file system object (FATFS) is used for the file
-/ data transfer. */
+#define _FS_TINY 0 /* 0:Normal or 1:Tiny */
+/* When _FS_TINY is set to 1, it reduces memory consumption _MAX_SS bytes each
+/ file object. For file data transfer, FatFs uses the common sector buffer in
+/ the file system object (FATFS) instead of private sector buffer eliminated
+/ from the file object (FIL). */
-#define _FS_READONLY 0
-/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)
-/ Read-only configuration removes basic writing API functions, f_write(),
-/ f_sync(), f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(),
-/ f_getfree() and optional writing functions as well. */
+#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */
+/* Setting _FS_READONLY to 1 defines read only configuration. This removes
+/ writing functions, f_write(), f_sync(), f_unlink(), f_mkdir(), f_chmod(),
+/ f_rename(), f_truncate() and useless f_getfree(). */
-#define _FS_MINIMIZE 0
-/* This option defines minimization level to remove some API functions.
+#define _FS_MINIMIZE 0 /* 0 to 3 */
+/* The _FS_MINIMIZE option defines minimization level to remove API functions.
/
/ 0: All basic functions are enabled.
/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(),
@@ -34,40 +36,32 @@ / 3: f_lseek() function is removed in addition to 2. */
-#define _USE_STRFUNC 0
-/* This option switches string functions, f_gets(), f_putc(), f_puts() and
-/ f_printf().
-/
-/ 0: Disable string functions.
-/ 1: Enable without LF-CRLF conversion.
-/ 2: Enable with LF-CRLF conversion. */
+#define _USE_STRFUNC 0 /* 0:Disable or 1-2:Enable */
+/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
-#define _USE_MKFS 0
-/* This option switches f_mkfs() function. (0:Disable or 1:Enable)
-/ To enable it, also _FS_READONLY need to be set to 0. */
+#define _USE_MKFS 0 /* 0:Disable or 1:Enable */
+/* To enable f_mkfs() function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
-#define _USE_FASTSEEK 0
-/* This option switches fast seek feature. (0:Disable or 1:Enable) */
+#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */
+/* To enable fast seek feature, set _USE_FASTSEEK to 1. */
-#define _USE_LABEL 0
-/* This option switches volume label functions, f_getlabel() and f_setlabel().
-/ (0:Disable or 1:Enable) */
+#define _USE_LABEL 0 /* 0:Disable or 1:Enable */
+/* To enable volume label functions, set _USE_LAVEL to 1 */
-#define _USE_FORWARD 0
-/* This option switches f_forward() function. (0:Disable or 1:Enable) */
-/* To enable it, also _FS_TINY need to be set to 1. */
+#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */
+/* To enable f_forward() function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
/*---------------------------------------------------------------------------/
/ Locale and Namespace Configurations
/---------------------------------------------------------------------------*/
-#define _CODE_PAGE 437
-/* This option specifies the OEM code page to be used on the target system.
+#define _CODE_PAGE 1252
+/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
/ Incorrect setting of the code page can cause a file open failure.
/
/ 932 - Japanese Shift_JIS (DBCS, OEM, Windows)
@@ -95,11 +89,11 @@ / 857 - Turkish (OEM)
/ 862 - Hebrew (OEM)
/ 874 - Thai (OEM, Windows)
-/ 1 - ASCII (No extended character. Valid for only non-LFN configuration.) */
+/ 1 - ASCII (Valid for only non-LFN configuration) */
-#define _USE_LFN 0
-#define _MAX_LFN 255
+#define _USE_LFN 3 /* 0 to 3 */
+#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */
/* The _USE_LFN option switches the LFN feature.
/
/ 0: Disable LFN feature. _MAX_LFN has no effect.
@@ -107,86 +101,77 @@ / 2: Enable LFN with dynamic working buffer on the STACK.
/ 3: Enable LFN with dynamic working buffer on the HEAP.
/
-/ When enable the LFN feature, Unicode handling functions (option/unicode.c) must
-/ be added to the project. The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes.
-/ When use stack for the working buffer, take care on stack overflow. When use heap
-/ memory for the working buffer, memory management functions, ff_memalloc() and
-/ ff_memfree(), must be added to the project. */
+/ When enable LFN feature, Unicode handling functions ff_convert() and ff_wtoupper()
+/ function must be added to the project.
+/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. When use stack for the
+/ working buffer, take care on stack overflow. When use heap memory for the working
+/ buffer, memory management functions, ff_memalloc() and ff_memfree(), must be added
+/ to the project. */
-#define _LFN_UNICODE 0
-/* This option switches character encoding on the API. (0:ANSI/OEM or 1:Unicode)
-/ To use Unicode string for the path name, enable LFN feature and set _LFN_UNICODE
-/ to 1. This option also affects behavior of string I/O functions. */
+#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */
+/* To switch the character encoding on the FatFs API (TCHAR) to Unicode, enable LFN
+/ feature and set _LFN_UNICODE to 1. This option affects behavior of string I/O
+/ functions. This option must be 0 when LFN feature is not enabled. */
-#define _STRF_ENCODE 3
-/* When _LFN_UNICODE is 1, this option selects the character encoding on the file to
-/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf().
-/
-/ 0: ANSI/OEM
-/ 1: UTF-16LE
-/ 2: UTF-16BE
-/ 3: UTF-8
-/
-/ When _LFN_UNICODE is 0, this option has no effect. */
+#define _STRF_ENCODE 3 /* 0:ANSI/OEM, 1:UTF-16LE, 2:UTF-16BE, 3:UTF-8 */
+/* When Unicode API is enabled by _LFN_UNICODE option, this option selects the character
+/ encoding on the file to be read/written via string I/O functions, f_gets(), f_putc(),
+/ f_puts and f_printf(). This option has no effect when Unicode API is not enabled. */
-#define _FS_RPATH 0
-/* This option configures relative path feature.
+#define _FS_RPATH 0 /* 0 to 2 */
+/* The _FS_RPATH option configures relative path feature.
/
/ 0: Disable relative path feature and remove related functions.
-/ 1: Enable relative path feature. f_chdir() and f_chdrive() are available.
+/ 1: Enable relative path. f_chdrive() and f_chdir() function are available.
/ 2: f_getcwd() function is available in addition to 1.
/
-/ Note that directory items read via f_readdir() are affected by this option. */
+/ Note that output of the f_readdir() fnction is affected by this option. */
/*---------------------------------------------------------------------------/
/ Drive/Volume Configurations
/---------------------------------------------------------------------------*/
-#define _VOLUMES 1
+#define _VOLUMES 1
/* Number of volumes (logical drives) to be used. */
-#define _STR_VOLUME_ID 0
-#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"
-/* _STR_VOLUME_ID option switches string volume ID feature.
-/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
-/ number in the path name. _VOLUME_STRS defines the drive ID strings for each
-/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for
-/ the drive ID strings are: A-Z and 0-9. */
+#define _STR_VOLUME_ID 0 /* 0:Use only 0-9 for drive ID, 1:Use strings for drive ID */
+#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"
+/* When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
+/ number in the path name. _VOLUME_STRS defines the drive ID strings for each logical
+/ drives. Number of items must be equal to _VOLUMES. Valid characters for the drive ID
+/ strings are: 0-9 and A-Z. */
-#define _MULTI_PARTITION 0
-/* This option switches multi-partition feature. By default (0), each logical drive
-/ number is bound to the same physical drive number and only an FAT volume found on
-/ the physical drive will be mounted. When multi-partition feature is enabled (1),
-/ each logical drive number is bound to arbitrary physical drive and partition
-/ listed in the VolToPart[]. Also f_fdisk() funciton will be enabled. */
+#define _MULTI_PARTITION 0 /* 0:Single partition, 1:Enable multiple partition */
+/* By default(0), each logical drive number is bound to the same physical drive number
+/ and only a FAT volume found on the physical drive is mounted. When it is set to 1,
+/ each logical drive number is bound to arbitrary drive/partition listed in VolToPart[].
+*/
-#define _MIN_SS 512
-#define _MAX_SS 512
-/* These options configure the range of sector size to be supported. (512, 1024,
-/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and
-/ harddisk. But a larger value may be required for on-board flash memory and some
-/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured
-/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the
-/ disk_ioctl() function. */
+#define _MIN_SS 512
+#define _MAX_SS 512
+/* These options configure the range of sector size to be supported. (512, 1024, 2048 or
+/ 4096) Always set both 512 for most systems, all memory card and harddisk. But a larger
+/ value may be required for on-board flash memory and some type of optical media.
+/ When _MAX_SS is larger than _MIN_SS, FatFs is configured to variable sector size and
+/ GET_SECTOR_SIZE command must be implemented to the disk_ioctl() function. */
-#define _USE_TRIM 0
-/* This option switches ATA-TRIM feature. (0:Disable or 1:Enable)
-/ To enable Trim feature, also CTRL_TRIM command should be implemented to the
-/ disk_ioctl() function. */
+#define _USE_ERASE 0 /* 0:Disable or 1:Enable */
+/* To enable sector erase feature, set _USE_ERASE to 1. Also CTRL_ERASE_SECTOR command
+/ should be added to the disk_ioctl() function. */
-#define _FS_NOFSINFO 0
-/* If you need to know correct free space on the FAT32 volume, set bit 0 of this
-/ option, and f_getfree() function at first time after volume mount will force
-/ a full FAT scan. Bit 1 controls the use of last allocated cluster number.
+#define _FS_NOFSINFO 0 /* 0 to 3 */
+/* If you need to know correct free space on the FAT32 volume, set bit 0 of this option
+/ and f_getfree() function at first time after volume mount will force a full FAT scan.
+/ Bit 1 controls the last allocated cluster number as bit 0.
/
/ bit0=0: Use free cluster count in the FSINFO if available.
/ bit0=1: Do not trust free cluster count in the FSINFO.
@@ -200,72 +185,46 @@ / System Configurations
/---------------------------------------------------------------------------*/
-#define _FS_NORTC 0
-#define _NORTC_MON 11
-#define _NORTC_MDAY 9
-#define _NORTC_YEAR 2014
-/* The _FS_NORTC option switches timestamp feature. If the system does not have
-/ an RTC function or valid timestamp is not needed, set _FS_NORTC to 1 to disable
-/ the timestamp feature. All objects modified by FatFs will have a fixed timestamp
-/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR.
-/ When timestamp feature is enabled (_FS_NORTC == 0), get_fattime() function need
-/ to be added to the project to read current time form RTC. _NORTC_MON,
-/ _NORTC_MDAY and _NORTC_YEAR have no effect.
-/ These options have no effect at read-only configuration (_FS_READONLY == 1). */
-
-
-#define _FS_LOCK 0
-/* The _FS_LOCK option switches file lock feature to control duplicated file open
-/ and illegal operation to open objects. This option must be 0 when _FS_READONLY
-/ is 1.
-/
-/ 0: Disable file lock feature. To avoid volume corruption, application program
-/ should avoid illegal open, remove and rename to the open objects.
-/ >0: Enable file lock feature. The value defines how many files/sub-directories
-/ can be opened simultaneously under file lock control. Note that the file
-/ lock feature is independent of re-entrancy. */
-
-
-#define _FS_REENTRANT 0
-#define _FS_TIMEOUT S2ST(10)
-typedef semaphore_t * _SYNC_t;
-/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs
-/ module itself. Note that regardless of this option, file access to different
-/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
-/ and f_fdisk() function, are always not re-entrant. Only file/directory access
-/ to the same volume is under control of this feature.
+#define _FS_LOCK 0 /* 0:Disable or >=1:Enable */
+/* To enable file lock control feature, set _FS_LOCK to non-zero value.
+/ The value defines how many files/sub-directories can be opened simultaneously
+/ with file lock control. This feature uses bss _FS_LOCK * 12 bytes. */
+
+
+#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */
+#define _FS_TIMEOUT MS2ST(1000) /* Timeout period in unit of time tick */
+#define _SYNC_t semaphore_t* /* O/S dependent sync object type. e.g. HANDLE, OS_EVENT*, ID, SemaphoreHandle_t and etc.. */
+/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs module.
/
/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.
/ 1: Enable re-entrancy. Also user provided synchronization handlers,
/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
-/ function, must be added to the project. Samples are available in
-/ option/syscall.c.
-/
-/ The _FS_TIMEOUT defines timeout period in unit of time tick.
-/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
-/ SemaphoreHandle_t and etc.. */
+/ function must be added to the project.
+*/
-#define _WORD_ACCESS 0
+#define _WORD_ACCESS 0 /* 0 or 1 */
/* The _WORD_ACCESS option is an only platform dependent option. It defines
/ which access method is used to the word data on the FAT volume.
/
/ 0: Byte-by-byte access. Always compatible with all platforms.
/ 1: Word access. Do not choose this unless under both the following conditions.
/
-/ * Address misaligned memory access is always allowed to ALL instructions.
+/ * Address misaligned memory access is always allowed for ALL instructions.
/ * Byte order on the memory is little-endian.
/
-/ If it is the case, _WORD_ACCESS can also be set to 1 to reduce code size.
-/ Following table shows allowable settings of some processor types.
+/ If it is the case, _WORD_ACCESS can also be set to 1 to improve performance and
+/ reduce code size. Following table shows an example of some processor types.
/
-/ ARM7TDMI 0 ColdFire 0 V850E 0
+/ ARM7TDMI 0 ColdFire 0 V850E2 0
/ Cortex-M3 0 Z80 0/1 V850ES 0/1
-/ Cortex-M0 0 x86 0/1 TLCS-870 0/1
-/ AVR 0/1 RX600(LE) 0/1 TLCS-900 0/1
+/ Cortex-M0 0 RX600(LE) 0/1 TLCS-870 0/1
+/ AVR 0/1 RX600(BE) 0 TLCS-900 0/1
/ AVR32 0 RL78 0 R32C 0
/ PIC18 0/1 SH-2 0 M16C 0/1
/ PIC24 0 H8S 0 MSP430 0
-/ PIC32 0 H8/300H 0 8051 0/1
+/ PIC32 0 H8/300H 0 x86 0/1
*/
+
+#endif /* _FFCONF */
diff --git a/testhal/STM32/STM32F4xx/USB_HOST/halconf_community.h b/testhal/STM32/STM32F4xx/USB_HOST/halconf_community.h index 49db499..807d741 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/halconf_community.h +++ b/testhal/STM32/STM32F4xx/USB_HOST/halconf_community.h @@ -14,8 +14,8 @@ limitations under the License.
*/
-#ifndef _HALCONF_COMMUNITY_H_
-#define _HALCONF_COMMUNITY_H_
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
/**
* @brief Enables the community overlay.
@@ -190,6 +190,6 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
-#endif /* _HALCONF_COMMUNITY_H_ */
+#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F4xx/USB_HOST/main.c b/testhal/STM32/STM32F4xx/USB_HOST/main.c index bfb318f..23470b8 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/main.c +++ b/testhal/STM32/STM32F4xx/USB_HOST/main.c @@ -17,14 +17,12 @@ #include "ch.h"
#include "hal.h"
#include "ff.h"
-#include "usbh.h"
#include <string.h>
#if HAL_USBH_USE_FTDI
#include "usbh/dev/ftdi.h"
-#include "test.h"
#include "shell.h"
#include "chprintf.h"
@@ -51,56 +49,6 @@ static uint8_t buf[] = "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
"0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef";
-static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
- size_t n, size;
-
- (void)argv;
- if (argc > 0) {
- chprintf(chp, "Usage: mem\r\n");
- return;
- }
- n = chHeapStatus(NULL, &size);
- chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
- chprintf(chp, "heap fragments : %u\r\n", n);
- chprintf(chp, "heap free total : %u bytes\r\n", size);
-}
-
-static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
- static const char *states[] = {CH_STATE_NAMES};
- thread_t *tp;
-
- (void)argv;
- if (argc > 0) {
- chprintf(chp, "Usage: threads\r\n");
- return;
- }
- chprintf(chp, " addr stack prio refs state\r\n");
- tp = chRegFirstThread();
- do {
- chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
- (uint32_t)tp, (uint32_t)tp->p_ctx.r13,
- (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
- states[tp->p_state]);
- tp = chRegNextThread(tp);
- } while (tp != NULL);
-}
-
-static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
- thread_t *tp;
-
- (void)argv;
- if (argc > 0) {
- chprintf(chp, "Usage: test\r\n");
- return;
- }
- tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
- TestThread, chp);
- if (tp == NULL) {
- chprintf(chp, "out of memory\r\n");
- return;
- }
- chThdWait(tp);
-}
static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) {
@@ -115,15 +63,12 @@ static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { }
while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) {
- chSequentialStreamWrite(&FTDIPD[0], buf, sizeof buf - 1);
+ streamWrite(&FTDIPD[0], buf, sizeof buf - 1);
}
chprintf(chp, "\r\n\nstopped\r\n");
}
static const ShellCommand commands[] = {
- {"mem", cmd_mem},
- {"threads", cmd_threads},
- {"test", cmd_test},
{"write", cmd_write},
{NULL, NULL}
};
@@ -159,12 +104,12 @@ start: //loopback
if (0) {
for(;;) {
- msg_t m = chSequentialStreamGet(ftdipp);
+ msg_t m = streamGet(ftdipp);
if (m < MSG_OK) {
usbDbgPuts("FTDI: Disconnected");
goto start;
}
- chSequentialStreamPut(ftdipp, (uint8_t)m);
+ streamPut(ftdipp, (uint8_t)m);
if (m == 'q')
break;
}
@@ -177,7 +122,7 @@ start: if (ftdipp->state != USBHFTDIP_STATE_READY)
goto start;
if (!shelltp) {
- shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+ shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, "shell", NORMALPRIO, shellThread, (void *) &shell_cfg1);
} else if (chThdTerminatedX(shelltp)) {
chThdRelease(shelltp);
if (ftdipp->state != USBHFTDIP_STATE_READY)
@@ -191,7 +136,7 @@ start: //FTDI uart RX to debug TX bridge
if (0) {
for(;;) {
- msg_t m = chSequentialStreamGet(ftdipp);
+ msg_t m = streamGet(ftdipp);
if (m < MSG_OK) {
usbDbgPuts("FTDI: Disconnected");
goto start;
@@ -215,14 +160,14 @@ start: uint32_t times = bytes / 1024;
st = chVTGetSystemTimeX();
while (times--) {
- if (chSequentialStreamWrite(ftdipp, buf, 1024) < 1024) {
+ if (streamWrite(ftdipp, buf, 1024) < 1024) {
usbDbgPuts("FTDI: Disconnected");
goto start;
}
bytes -= 1024;
}
if (bytes) {
- if (chSequentialStreamWrite(ftdipp, buf, bytes) < bytes) {
+ if (streamWrite(ftdipp, buf, bytes) < bytes) {
usbDbgPuts("FTDI: Disconnected");
goto start;
}
@@ -235,7 +180,7 @@ start: //single character write test (tests the timer)
if (0) {
for (;;) {
- if (chSequentialStreamPut(ftdipp, 'A') != MSG_OK) {
+ if (streamPut(ftdipp, 'A') != MSG_OK) {
usbDbgPuts("FTDI: Disconnected");
goto start;
}
diff --git a/testhal/STM32/STM32F4xx/USB_HOST/mcuconf_community.h b/testhal/STM32/STM32F4xx/USB_HOST/mcuconf_community.h index 56775af..5cb823a 100644 --- a/testhal/STM32/STM32F4xx/USB_HOST/mcuconf_community.h +++ b/testhal/STM32/STM32F4xx/USB_HOST/mcuconf_community.h @@ -48,19 +48,19 @@ /* * USBH driver system settings. */ -#define STM32_OTG1_CHANNELS_NUMBER 8 -#define STM32_OTG2_CHANNELS_NUMBER 12 +#define STM32_OTG1_CHANNELS_NUMBER 8 +#define STM32_OTG2_CHANNELS_NUMBER 12 -#define STM32_USBH_USE_OTG1 1 -#define STM32_OTG1_RXFIFO_SIZE 1024 -#define STM32_OTG1_PTXFIFO_SIZE 128 -#define STM32_OTG1_NPTXFIFO_SIZE 128 +#define STM32_USBH_USE_OTG1 1 +#define STM32_OTG1_RXFIFO_SIZE 1024 +#define STM32_OTG1_PTXFIFO_SIZE 128 +#define STM32_OTG1_NPTXFIFO_SIZE 128 -#define STM32_USBH_USE_OTG2 0 -#define STM32_OTG2_RXFIFO_SIZE 2048 -#define STM32_OTG2_PTXFIFO_SIZE 1024 -#define STM32_OTG2_NPTXFIFO_SIZE 1024 +#define STM32_USBH_USE_OTG2 0 +#define STM32_OTG2_RXFIFO_SIZE 2048 +#define STM32_OTG2_PTXFIFO_SIZE 1024 +#define STM32_OTG2_NPTXFIFO_SIZE 1024 -#define STM32_USBH_MIN_QSPACE 4 -#define STM32_USBH_CHANNELS_NP 4 +#define STM32_USBH_MIN_QSPACE 4 +#define STM32_USBH_CHANNELS_NP 4 diff --git a/testhal/STM32/STM32F4xx/onewire/halconf_community.h b/testhal/STM32/STM32F4xx/onewire/halconf_community.h index 91dbfbc..0621fdb 100644 --- a/testhal/STM32/STM32F4xx/onewire/halconf_community.h +++ b/testhal/STM32/STM32F4xx/onewire/halconf_community.h @@ -14,8 +14,8 @@ limitations under the License.
*/
-#ifndef _HALCONF_COMMUNITY_H_
-#define _HALCONF_COMMUNITY_H_
+#ifndef HALCONF_COMMUNITY_H
+#define HALCONF_COMMUNITY_H
/**
* @brief Enables the community overlay.
@@ -93,6 +93,6 @@ */
#define ONEWIRE_USE_SEARCH_ROM TRUE
-#endif /* _HALCONF_COMMUNITY_H_ */
+#endif /* HALCONF_COMMUNITY_H */
/** @} */
diff --git a/testhal/STM32/STM32F7xx/USB_MSD/Makefile b/testhal/STM32/STM32F7xx/USB_MSD/Makefile index ac17448..912a555 100644 --- a/testhal/STM32/STM32F7xx/USB_MSD/Makefile +++ b/testhal/STM32/STM32F7xx/USB_MSD/Makefile @@ -110,7 +110,7 @@ include $(CHIBIOS)/os/hal/lib/streams/streams.mk include $(CHIBIOS)/os/various/shell/shell.mk # Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F767Zx.ld +LDSCRIPT= $(STARTUPLD)/STM32F76xxI.ld # C sources that can be compiled in ARM or THUMB mode depending on the global # setting. |