From fd20f0fa17bfdf81dc28e7d30f13ca80264b7c78 Mon Sep 17 00:00:00 2001
From: Andrew Wygle <awygle@gmail.com>
Date: Fri, 8 Apr 2016 01:43:46 -0700
Subject: Initial MSP430X Port.

This port includes hal, pal, serial, and st drivers. It supports both
large and small model code and data for MSP430X-class CPUs. It has only
been tested on the EXP430FR5969 LaunchPad board.
---
 demos/MSP430X/NIL-EXP430FR5969/main.c | 76 +++++++++++++++++++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 demos/MSP430X/NIL-EXP430FR5969/main.c

(limited to 'demos/MSP430X/NIL-EXP430FR5969/main.c')

diff --git a/demos/MSP430X/NIL-EXP430FR5969/main.c b/demos/MSP430X/NIL-EXP430FR5969/main.c
new file mode 100644
index 0000000..27f0e52
--- /dev/null
+++ b/demos/MSP430X/NIL-EXP430FR5969/main.c
@@ -0,0 +1,76 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+#include "ch.h"
+#include "ch_test.h"
+#include "test_root.h"
+
+/*
+ * Thread 2.
+ */
+THD_WORKING_AREA(waThread2, 2048);
+THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  /*
+   * Activate the serial driver 0 using the driver default configuration.
+   */
+  sdStart(&SD0, NULL);
+
+  while (chnGetTimeout(&SD0, TIME_INFINITE)) {
+    chnWrite(&SD0, (const uint8_t *)"Hello World!\r\n", 14);
+    test_execute((void*)&SD0);
+    chThdSleepMilliseconds(2000);
+  }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+  THD_TABLE_ENTRY(wa_test_support, "test_support", test_support, 
+      (void *)&nil.threads[1])
+  THD_TABLE_ENTRY(waThread2, "hello", Thread2, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  WDTCTL = WDTPW | WDTHOLD;
+  
+
+  halInit();
+  chSysInit();
+  
+  /* This is now the idle thread loop, you may perform here a low priority
+     task but you must never try to sleep or wait in this loop. Note that
+     this tasks runs at the lowest priority level so any instruction added
+     here will be executed after all other tasks have been started.*/
+  while (true) {
+  }
+}
-- 
cgit v1.2.3