From 9d74dd2661b80a5ae8598591f0251b197cc51756 Mon Sep 17 00:00:00 2001 From: barthess Date: Thu, 7 Apr 2016 16:39:12 +0300 Subject: STM32 mass update to current naming convention in ChibiOS --- os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h | 249 +++++++++++++++++++++++++++++ 1 file changed, 249 insertions(+) create mode 100644 os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h (limited to 'os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h') diff --git a/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h b/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h new file mode 100644 index 0000000..ecdaf81 --- /dev/null +++ b/os/hal/ports/STM32/LLD/CRCv1/hal_crc_lld.h @@ -0,0 +1,249 @@ +/* + ChibiOS - Copyright (C) 2015 Michael D. Spradling + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file STM32/CRCv1/crc_lld.h + * @brief STM32 CRC subsystem low level driver header. + * + * @addtogroup CRC + * @{ + */ + +#ifndef _CRC_LLD_H_ +#define _CRC_LLD_H_ + +#if (HAL_USE_CRC == TRUE) || defined(__DOXYGEN__) + +/* + * This error check must occur outsite of CRCSW_USE_CRC1 to check if + * two LLD drivers are enabled at the same time + */ +#if STM32_CRC_USE_CRC1 == TRUE && \ + CRCSW_USE_CRC1 == TRUE +#error "Software CRC can't be enable with STM32_CRC_USE_CRC1" +#endif + +/** + * Allow CRC Software override for ST drivers. Some ST CRC implimentations + * have limited capabilities. + */ +#if CRCSW_USE_CRC1 != TRUE + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @name Configuration options + * @{ + */ +/** + * @brief CRC1 driver enable switch. + * @details If set to @p TRUE the support for CRC1 is included. + * @note The default is @p FALSE. + */ +#if !defined(STM32_CRC_USE_CRC1) || defined(__DOXYGEN__) +#define STM32_CRC_USE_CRC1 FALSE +#endif + +/** + * @brief CRC1 DMA priority (0..3|lowest..highest). + * @note The priority level is for CRC DMA stream. + */ +#if !defined(STM32_CRC_CRC1_DMA_PRIORITY) || defined(__DOXYGEN__) +#define STM32_CRC_CRC1_DMA_PRIORITY 2 +#endif + +/** + * @brief CRC1 DMA interrupt priority level setting. + */ +#if !defined(STM32_CRC_CRC1_DMA_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1 +#endif + +/** + * @brief CRC1 DMA STREAM to use when performing CRC calculation. + */ +#if !defined(STM32_CRC_CRC1_DMA_STREAM) || defined(__DOXYGEN__) +#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2 +#endif + +/** + * @brief CRC DMA error hook. + */ +#if !defined(STM32_CRC_DMA_ERROR_HOOK) || defined(__DOXYGEN__) +#define STM32_CRC_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") +#endif + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +#if STM32_CRC_USE_CRC1 && !STM32_HAS_CRC +#error "Hardware CRC not present in the selected device" +#error "Use CRCSW_USE_CRC1 for software implementation" +#endif + +#if CRC_USE_DMA +#if STM32_CRC_USE_CRC1 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(STM32_CRC_CRC1_DMA_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to CRC1" +#endif + +#if STM32_CRC_USE_CRC1 && \ + !STM32_DMA_IS_VALID_PRIORITY(STM32_CRC_CRC1_DMA_PRIORITY) +#error "Invalid DMA priority assigned to CRC1" +#endif + +#if !defined(STM32_DMA_REQUIRED) +#define STM32_DMA_REQUIRED +#endif +#endif + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/** + * @brief Type of a structure representing an CRC driver. + */ +typedef struct CRCDriver CRCDriver; + +/** + * @brief CRC notification callback type + * + * @param[in] crcp pointer to the @ CRCDriver object triggering the + * callback + */ +typedef void (*crccallback_t)(CRCDriver *crcp, uint32_t crc); + +/** + * @brief Driver configuration structure. + */ +typedef struct { + /** + * @brief The size of polynomial to be used for CRC. + */ + uint32_t poly_size; + /** + * @brief The coefficients of the polynomial to be used for CRC. + */ + uint32_t poly; + /** + * @brief The inital value + */ + uint32_t initial_val; + /** + * @brief The final XOR value + */ + uint32_t final_val; + /** + * @brief Reflect bit order data going into CRC + */ + bool reflect_data; + /** + * @brief Reflect bit order of final remainder + */ + bool reflect_remainder; + /* End of the mandatory fields.*/ + /** + * @brief Operation complete callback or @p NULL + */ + crccallback_t end_cb; +} CRCConfig; + + +/** + * @brief Structure representing an CRC driver. + */ +struct CRCDriver { + /** + * @brief Driver state. + */ + crcstate_t state; + /** + * @brief Current configuration data. + */ + const CRCConfig *config; +#if CRC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) + /** + * @brief Mutex protecting the peripheral. + */ + mutex_t mutex; +#endif /* CRC_USE_MUTUAL_EXCLUSION */ +#if defined(CRC_DRIVER_EXT_FIELDS) + CRC_DRIVER_EXT_FIELDS +#endif + /* End of the mandatory fields.*/ + /** + * @brief Pointer to the CRCx registers block. + */ + CRC_TypeDef *crc; + +#if CRC_USE_DMA == TRUE + /** + * @brief Waiting thread. + */ + thread_reference_t thread; + /** + * @brief CRC DMA stream + */ + const stm32_dma_stream_t *dma; + /** + * @brief DMA mode bit mask. + */ + uint32_t dmamode; +#endif +}; + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#if STM32_CRC_USE_CRC1 && !defined(__DOXYGEN__) +extern CRCDriver CRCD1; +#endif /* STM32_CRC_USE_CRC1 */ + +#ifdef __cplusplus +extern "C" { +#endif + void crc_lld_init(void); + void crc_lld_start(CRCDriver *crcp); + void crc_lld_stop(CRCDriver *crcp); + void crc_lld_reset(CRCDriver *crcp); + uint32_t crc_lld_calc(CRCDriver *crcp, size_t n, const void *buf); +#if CRC_USE_DMA + void crc_lld_start_calc(CRCDriver *crcp, size_t n, const void *buf); +#endif +#ifdef __cplusplus +} +#endif + +#endif /* CRCSW_USE_CRC1 */ + +#endif /* HAL_USE_CRC */ + +#endif /* _CRC_LLD_H_ */ + +/** @} */ -- cgit v1.2.3