diff options
| -rw-r--r-- | os/hal/include/i2c.h | 28 | ||||
| -rw-r--r-- | os/hal/include/i2c_albi.h | 185 | ||||
| -rw-r--r-- | os/hal/include/i2c_brts.h | 146 | ||||
| -rw-r--r-- | os/hal/platforms/STM32/i2c_lld.c | 465 | ||||
| -rw-r--r-- | os/hal/platforms/STM32/i2c_lld.h | 273 | ||||
| -rw-r--r-- | os/hal/platforms/STM32/i2c_lld_albi.c | 574 | ||||
| -rw-r--r-- | os/hal/platforms/STM32/i2c_lld_albi.h | 263 | ||||
| -rw-r--r-- | os/hal/platforms/STM32/i2c_lld_brts.c | 462 | ||||
| -rw-r--r-- | os/hal/platforms/STM32/i2c_lld_brts.h | 267 | ||||
| -rw-r--r-- | os/hal/platforms/STM32/platform.mk | 4 | ||||
| -rw-r--r-- | os/hal/src/i2c.c | 125 | ||||
| -rw-r--r-- | os/hal/src/i2c_albi.c | 268 | ||||
| -rw-r--r-- | os/hal/src/i2c_brts.c | 215 |
13 files changed, 3169 insertions, 106 deletions
diff --git a/os/hal/include/i2c.h b/os/hal/include/i2c.h index 01d3739e8..64816186b 100644 --- a/os/hal/include/i2c.h +++ b/os/hal/include/i2c.h @@ -34,6 +34,7 @@ /* Driver constants. */
/*===========================================================================*/
+
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
@@ -60,10 +61,11 @@ typedef enum { I2C_UNINIT = 0, /**< Not initialized. */
I2C_STOP = 1, /**< Stopped. */
I2C_READY = 2, /**< Ready. */
- I2C_MREADY = 3, /**< START and address sent. */
+ I2C_MACTIVE = 3, /**< START condition sent. */
I2C_MTRANSMIT = 4, /**< Master transmitting. */
I2C_MRECEIVE = 5, /**< Master receiving. */
- I2C_MERROR = 6 /**< Error condition. */
+ I2C_MWAIT_TF = 6, /**< Master wait Transmission Finished */
+ I2C_MERROR = 7 /**< Error condition. */
} i2cstate_t;
#include "i2c_lld.h"
@@ -112,23 +114,23 @@ typedef enum { /*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
-
#ifdef __cplusplus
extern "C" {
#endif
void i2cInit(void);
void i2cObjectInit(I2CDriver *i2cp);
- void i2cStart(I2CDriver *i2cp, const I2CConfig *config);
+ void i2cStart(I2CDriver *i2cp, I2CConfig *config);
void i2cStop(I2CDriver *i2cp);
- void i2cMasterStartI(I2CDriver *i2cp,
- uint16_t header,
- i2ccallback_t callback);
- void i2cMasterStopI(I2CDriver *i2cp, i2ccallback_t callback);
- void i2cMasterRestartI(I2CDriver *i2cp, i2ccallback_t callback);
- void i2cMasterTransmitI(I2CDriver *i2cp, size_t n, const uint8_t *txbuf,
- i2ccallback_t callback);
- void i2cMasterReceiveI(I2CDriver *i2cp, size_t n, uint8_t *rxbuf,
- i2ccallback_t callback);
+ void i2cMasterTransmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+ void i2cMasterReceive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+
+
+
+ void i2cMasterStartI(I2CDriver *i2cp,uint16_t header);
+ void i2cMasterStopI(I2CDriver *i2cp);
+ void i2cMasterRestartI(I2CDriver *i2cp);
+ void i2cMasterTransmitI(I2CDriver *i2cp, size_t n, const uint8_t *txbuf);
+ void i2cMasterReceiveI(I2CDriver *i2cp, size_t n, uint8_t *rxbuf);
#if I2C_USE_MUTUAL_EXCLUSION
void i2cAcquireBus(I2CDriver *i2cp);
void i2cReleaseBus(I2CDriver *i2cp);
diff --git a/os/hal/include/i2c_albi.h b/os/hal/include/i2c_albi.h new file mode 100644 index 000000000..30ec38548 --- /dev/null +++ b/os/hal/include/i2c_albi.h @@ -0,0 +1,185 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file i2c.h
+ * @brief I2C Driver macros and structures.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#ifndef I2C_H_
+#define I2C_H_
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+#define I2CD_NO_ERROR 0
+/** @brief Bus Error.*/
+#define I2CD_BUS_ERROR 0x01
+/** @brief Arbitration Lost (master mode).*/
+#define I2CD_ARBITRATION_LOST 0x02
+/** @brief Acknowledge Failure.*/
+#define I2CD_ACK_FAILURE 0x04
+/** @brief Overrun/Underrun.*/
+#define I2CD_OVERRUN 0x08
+/** @brief PEC Error in reception.*/
+#define I2CD_PEC_ERROR 0x10
+/** @brief Timeout or Tlow Error.*/
+#define I2CD_TIMEOUT 0x20
+/** @brief SMBus Alert.*/
+#define I2CD_SMB_ALERT 0x40
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(I2C_USE_WAIT) || defined(__DOXYGEN__)
+#define I2C_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if I2C_USE_MUTUAL_EXCLUSION && !CH_USE_MUTEXES && !CH_USE_SEMAPHORES
+#error "I2C_USE_MUTUAL_EXCLUSION requires CH_USE_MUTEXES and/or CH_USE_SEMAPHORES"
+#endif
+
+/**
+ * @brief Driver state machine possible states.
+ */
+typedef enum {
+ I2C_UNINIT = 0, /**< @brief Not initialized. */
+ I2C_STOP = 1, /**< @brief Stopped. */
+ I2C_READY = 2, /**< @brief Ready. */
+ I2C_ACTIVE = 3, /**< @brief In communication. */
+ I2C_COMPLETE = 4 /**< @brief Asynchronous operation complete. */
+} i2cstate_t;
+
+#include "i2c_lld.h"
+
+#if I2C_USE_WAIT || defined(__DOXYGEN__)
+/**
+ * @brief Waits for operation completion.
+ * @details This function waits for the driver to complete the current
+ * operation.
+ * @pre An operation must be running while the function is invoked.
+ * @note No more than one thread can wait on a I2C driver using
+ * this function.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#define _i2c_wait_s(i2cp) { \
+ chDbgAssert((i2cp)->thread == NULL, \
+ "_i2c_wait(), #1", "already waiting"); \
+ (i2cp)->thread = chThdSelf(); \
+ chSchGoSleepS(THD_STATE_SUSPENDED); \
+}
+
+/**
+ * @brief Wakes up the waiting thread.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#define _i2c_wakeup_isr(i2cp) { \
+ if ((i2cp)->thread != NULL) { \
+ Thread *tp = (i2cp)->thread; \
+ (i2cp)->thread = NULL; \
+ chSysLockFromIsr(); \
+ chSchReadyI(tp); \
+ chSysUnlockFromIsr(); \
+ } \
+}
+#else /* !I2C_USE_WAIT */
+#define _i2c_wait_s(i2cp)
+#define _i2c_wakeup_isr(i2cp)
+#endif /* !I2C_USE_WAIT */
+
+/**
+ * @brief Common ISR code.
+ * @details This code handles the portable part of the ISR code:
+ * - Callback invocation.
+ * - Waiting thread wakeup, if any.
+ * - Driver state transitions.
+ * .
+ * @note This macro is meant to be used in the low level drivers
+ * implementation only.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#define _i2c_isr_code(i2cp) { \
+ (i2cp)->state = I2C_COMPLETE; \
+ if((i2cp)->endcb) { \
+ (i2cp)->endcb(i2cp); \
+ } \
+ _i2c_wakeup_isr(i2cp); \
+}
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void i2cInit(void);
+ void i2cObjectInit(I2CDriver *i2cp);
+ void i2cStart(I2CDriver *i2cp, const I2CConfig *config);
+ void i2cStop(I2CDriver *i2cp);
+ void i2cMasterTransmit(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *txbuf);
+ void i2cMasterReceive(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *rxbuf);
+ void i2cAddFlagsI(I2CDriver *i2cp, i2cflags_t mask);
+ i2cflags_t i2cGetAndClearFlags(I2CDriver *i2cp);
+ uint16_t i2cSMBusAlertResponse(I2CDriver *i2cp);
+
+#if I2C_USE_MUTUAL_EXCLUSION
+ void i2cAcquireBus(I2CDriver *i2cp);
+ void i2cReleaseBus(I2CDriver *i2cp);
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* CH_HAL_USE_I2C */
+
+#endif /* I2C_H_ */
diff --git a/os/hal/include/i2c_brts.h b/os/hal/include/i2c_brts.h new file mode 100644 index 000000000..64816186b --- /dev/null +++ b/os/hal/include/i2c_brts.h @@ -0,0 +1,146 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file i2c.h
+ * @brief I2C Driver macros and structures.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#ifndef _I2C_H_
+#define _I2C_H_
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Driver state machine possible states.
+ */
+typedef enum {
+ I2C_UNINIT = 0, /**< Not initialized. */
+ I2C_STOP = 1, /**< Stopped. */
+ I2C_READY = 2, /**< Ready. */
+ I2C_MACTIVE = 3, /**< START condition sent. */
+ I2C_MTRANSMIT = 4, /**< Master transmitting. */
+ I2C_MRECEIVE = 5, /**< Master receiving. */
+ I2C_MWAIT_TF = 6, /**< Master wait Transmission Finished */
+ I2C_MERROR = 7 /**< Error condition. */
+} i2cstate_t;
+
+#include "i2c_lld.h"
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Read mode.
+ */
+#define I2C_READ 1
+
+/**
+ * @brief Write mode.
+ */
+#define I2C_WRITE 0
+
+/**
+ * @brief Seven bits addresses header builder.
+ *
+ * @param[in] addr seven bits address value
+ * @param[in] rw read/write flag
+ *
+ * @return A 16 bit value representing the header, the most
+ * significant byte is always zero.
+ */
+#define I2C_ADDR7(addr, rw) (uint16_t)((addr) << 1 | (rw))
+
+
+/**
+ * @brief Ten bits addresses header builder.
+ *
+ * @param[in] addr ten bits address value
+ * @param[in] rw read/write flag
+ *
+ * @return A 16 bit value representing the header, the most
+ * significant byte is the first one to be transmitted.
+ */
+#define I2C_ADDR10(addr, rw) \
+ (uint16_t)(0xF000 | \
+ (((addr) & 0x0300) << 1) | \
+ (((rw) << 8)) | \
+ ((addr) & 0x00FF))
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void i2cInit(void);
+ void i2cObjectInit(I2CDriver *i2cp);
+ void i2cStart(I2CDriver *i2cp, I2CConfig *config);
+ void i2cStop(I2CDriver *i2cp);
+ void i2cMasterTransmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+ void i2cMasterReceive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+
+
+
+ void i2cMasterStartI(I2CDriver *i2cp,uint16_t header);
+ void i2cMasterStopI(I2CDriver *i2cp);
+ void i2cMasterRestartI(I2CDriver *i2cp);
+ void i2cMasterTransmitI(I2CDriver *i2cp, size_t n, const uint8_t *txbuf);
+ void i2cMasterReceiveI(I2CDriver *i2cp, size_t n, uint8_t *rxbuf);
+#if I2C_USE_MUTUAL_EXCLUSION
+ void i2cAcquireBus(I2CDriver *i2cp);
+ void i2cReleaseBus(I2CDriver *i2cp);
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_I2C */
+
+#endif /* _I2C_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/i2c_lld.c b/os/hal/platforms/STM32/i2c_lld.c new file mode 100644 index 000000000..71873be05 --- /dev/null +++ b/os/hal/platforms/STM32/i2c_lld.c @@ -0,0 +1,465 @@ +/** + * @file STM32/i2c_lld.c + * @brief STM32 I2C subsystem low level driver source. Slave mode not implemented. + * @addtogroup STM32_I2C + * @{ + */ + +#include "ch.h" +#include "hal.h" +#include "i2c_lld.h" + +#if HAL_USE_I2C || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/** @brief I2C1 driver identifier.*/ +#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__) +I2CDriver I2CD1; +#endif + +/** @brief I2C2 driver identifier.*/ +#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__) +I2CDriver I2CD2; +#endif + +/*===========================================================================*/ +/* Driver local variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +/** + * @brief TODO: Status bits translation. + * + * @param[in] sr USART SR register value + * + * @return The error flags. + */ +static i2cflags_t translate_i2c_errors(uint16_t sr) { + i2cflags_t sts = 0; + + if (sr & USART_SR_ORE) + sts |= UART_OVERRUN_ERROR; + if (sr & USART_SR_PE) + sts |= UART_PARITY_ERROR; + if (sr & USART_SR_FE) + sts |= UART_FRAMING_ERROR; + if (sr & USART_SR_NE) + sts |= UART_NOISE_ERROR; + if (sr & USART_SR_LBD) + sts |= UART_BREAK_DETECTED; + return sts; +} + + +static void i2c_serve_error_interrupt(I2CDriver *i2cp) { + // TODO:remove this stub and write normal handler + // this is simply trap for errors + while TRUE{ + translate_i2c_errors(i2cp->id_i2c->SR1); + } +} + +/* This function handle all regular interrupt conditions + * TODO: 10 bit address handling here + */ +static void i2c_serve_event_interrupt(I2CDriver *i2cp) { + int i = 0; + int n = 0; + int m = 0; + + if ((i2cp->id_state == I2C_READY) && (i2cp->id_i2c->SR1 & I2C_SR1_SB)){// start bit sent + //i = i2cp->id_i2c->SR1; + i2cp->id_state = I2C_MACTIVE; + i2cp->id_i2c->DR = (i2cp->id_slave_config->slave_addr1 << 1) | + i2cp->id_slave_config->rw_bit; // write slave address in DR + return; + } + + // now "wait" interrupt with ADDR flag + if ((i2cp->id_state == I2C_MACTIVE) && (i2cp->id_i2c->SR1 & I2C_SR1_ADDR)){// address successfully sent + if(i2cp->id_i2c->SR2 & I2C_SR2_TRA){ + i2c_lld_txbyte(i2cp); // send first byte + i2cp->id_state = I2C_MTRANSMIT; // change state + return; + } + else { + /* In order to generate the non-acknowledge pulse after the last received + * data byte, the ACK bit must be cleared just after reading the second + * last data byte (after second last RxNE event). + */ + if (i2cp->id_slave_config->rxbytes > 1) + i2cp->id_i2c->CR1 |= I2C_CR1_ACK; // set ACK bit + i2cp->id_state = I2C_MRECEIVE; // change status + return; + } + } + + // transmitting bytes one by one + if ((i2cp->id_state == I2C_MTRANSMIT) && (i2cp->id_i2c->SR1 & I2C_SR1_TXE)){ + if (i2c_lld_txbyte(i2cp)) + i2cp->id_state = I2C_MWAIT_TF; // last byte written + return; + } + + //receiving bytes one by one + if ((i2cp->id_state == I2C_MRECEIVE) && (i2cp->id_i2c->SR1 & I2C_SR1_RXNE)){ +// i = i2cp->id_i2c->SR1; +// n = i2cp->id_i2c->SR2; + if (i2c_lld_rxbyte(i2cp)) + i2cp->id_state = I2C_MWAIT_TF; // last byte read +// i = i2cp->id_i2c->SR1; +// n = i2cp->id_i2c->SR2; + return; + } + + // "wait" BTF bit in status register +// if ((i2cp->id_state == I2C_MWAIT_TF) && (i2cp->id_i2c->SR1 & I2C_SR1_BTF)){ + if ((i2cp->id_state == I2C_MWAIT_TF) && (i2cp->id_i2c->SR1 & I2C_SR1_BTF)){ + chSysLockFromIsr(); + i2cp->id_slave_config->id_callback(i2cp, i2cp->id_slave_config); + + i = i2cp->id_i2c->SR1; + n = i2cp->id_i2c->SR2; + m = i2cp->id_i2c->CR1; + + chSysUnlockFromIsr(); + return; + } + else{ // trap + i = i2cp->id_i2c->SR1; + n = i2cp->id_i2c->SR2; + m = i2cp->id_i2c->CR1; + return; + } +} + + +#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__) +/** + * @brief I2C1 event interrupt handler. + */ +CH_IRQ_HANDLER(VectorBC) { + + CH_IRQ_PROLOGUE(); + i2c_serve_event_interrupt(&I2CD1); + CH_IRQ_EPILOGUE(); +} + +/** + * @brief I2C1 error interrupt handler. + */ +CH_IRQ_HANDLER(VectorC0) { + + CH_IRQ_PROLOGUE(); + i2c_serve_error_interrupt(&I2CD1); + CH_IRQ_EPILOGUE(); +} +#endif + +#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__) +/** + * @brief I2C2 event interrupt handler. + */ +CH_IRQ_HANDLER(VectorC4) { + + CH_IRQ_PROLOGUE(); + i2c_serve_event_interrupt(&I2CD2); + CH_IRQ_EPILOGUE(); +} + +/** + * @brief I2C2 error interrupt handler. + */ +CH_IRQ_HANDLER(VectorC8) { + + CH_IRQ_PROLOGUE(); + i2c_serve_error_interrupt(&I2CD2); + CH_IRQ_EPILOGUE(); +} +#endif + +/** + * @brief Low level I2C driver initialization. + */ +void i2c_lld_init(void) { + +#if STM32_I2C_USE_I2C1 + RCC->APB1RSTR = RCC_APB1RSTR_I2C1RST; // reset I2C 1 + RCC->APB1RSTR = 0; + i2cObjectInit(&I2CD1); + I2CD1.id_i2c = I2C1; +#endif + +#if STM32_I2C_USE_I2C2 + RCC->APB1RSTR = RCC_APB1RSTR_I2C2RST; // reset I2C 2 + RCC->APB1RSTR = 0; + i2cObjectInit(&I2CD2); + I2CD2.id_i2c = I2C2; +#endif +} + +/** + * @brief Configures and activates the I2C peripheral. + * + * @param[in] i2cp pointer to the @p I2CDriver object + */ +void i2c_lld_start(I2CDriver *i2cp) { + + /* If in stopped state then enables the I2C clock.*/ + if (i2cp->id_state == I2C_STOP) { +#if STM32_I2C_USE_I2C1 + if (&I2CD1 == i2cp) { + NVICEnableVector(I2C1_EV_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY); + NVICEnableVector(I2C1_ER_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY); + RCC->APB1ENR |= RCC_APB1ENR_I2C1EN; // I2C 1 clock enable + } +#endif +#if STM32_I2C_USE_I2C2 + if (&I2CD2 == i2cp) { + NVICEnableVector(I2C2_EV_IRQn, STM32_I2C2_IRQ_PRIORITY); + NVICEnableVector(I2C2_ER_IRQn, STM32_I2C2_IRQ_PRIORITY); + RCC->APB1ENR |= RCC_APB1ENR_I2C2EN; // I2C 2 clock enable + } +#endif + } + + /* I2C setup.*/ + i2cp->id_i2c->CR1 = I2C_CR1_SWRST; // reset i2c peripherial + i2cp->id_i2c->CR1 = 0; + + i2cp->id_i2c->CR1 = i2cp->id_config->i2cc_cr1; + i2cp->id_i2c->CR2 = i2cp->id_config->i2cc_cr2 | + I2C_CR2_ITERREN | + I2C_CR2_ITEVTEN | + I2C_CR2_ITBUFEN | + 36; //TODO: replace this by macro calculation + /* TODO: + * 1. macro timing calculator + * 2. parameter checker + * 3. definitions in halconf.h: i2c-freq, i2c_mode, etc + * 4. trise time calculator/checker + */ + i2cp->id_i2c->CCR = i2cp->id_config->i2cc_ccr | 180; + i2cp->id_i2c->TRISE = i2cp->id_config->i2cc_trise | 37; + i2cp->id_i2c->CR1 |= 1; // enable interface +} + +/** + * @brief Deactivates the I2C peripheral. + * + * @param[in] i2cp pointer to the @p I2CDriver object + */ +void i2c_lld_stop(I2CDriver *i2cp) { + + /* If in ready state then disables the I2C clock.*/ + if (i2cp->id_state == I2C_READY) { +#if STM32_I2C_USE_I2C1 + if (&I2CD1 == i2cp) { + NVICDisableVector(I2C1_EV_IRQn); + NVICDisableVector(I2C1_ER_IRQn); + RCC->APB1ENR &= ~RCC_APB1ENR_I2C1EN; + } +#endif +#if STM32_I2C_USE_I2C2 + if (&I2CD2 == i2cp) { + NVICDisableVector(I2C2_EV_IRQn); + NVICDisableVector(I2C2_ER_IRQn); + RCC->APB1ENR &= ~RCC_APB1ENR_I2C2EN; + } +#endif + } + i2cp->id_state = I2C_STOP; +} + + +/* helper function, not API + * write bytes in DR register + * return TRUE if last byte written + */ +bool_t i2c_lld_txbyte(I2CDriver *i2cp) { + void *txbufhead = i2cp->id_slave_config->txbufhead; + void *txbytes = i2cp->id_slave_config->txbytes; + + if (i2cp->id_slave_config->txbufhead < i2cp->id_slave_config->txbytes){ + i2cp->id_i2c->DR = i2cp->id_slave_config->txbuf[i2cp->id_slave_config->txbufhead]; + (i2cp->id_slave_config->txbufhead)++; + return(FALSE); + } + i2cp->id_slave_config->txbufhead = 0; + return(TRUE); // last byte written +} + + +/* helper function, not API + * read bytes from DR register + * return TRUE if last byte read + */ +bool_t i2c_lld_rxbyte(I2CDriver *i2cp) { + // temporal variables + #define rxbuf i2cp->id_slave_config->rxbuf + #define rxbufhead i2cp->id_slave_config->rxbufhead + #define rxdepth i2cp->id_slave_config->rxdepth + #define rxbytes i2cp->id_slave_config->rxbytes + + /* In order to generate the non-acknowledge pulse after the last received + * data byte, the ACK bit must be cleared just after reading the second + * last data byte (after second last RxNE event). + */ + if (rxbufhead < rxbytes){ + rxbuf[rxbufhead] = i2cp->id_i2c->DR; + if ((rxbytes - rxbufhead) <= 2){ + i2cp->id_i2c->CR1 &= (~I2C_CR1_ACK);// clear ACK bit for automatically send NACK + } + rxbufhead++; + return(FALSE); + } + i2cp->id_i2c->CR2 &= (~I2C_CR2_ITBUFEN); // disable interrupt + rxbuf[rxbufhead] = i2cp->id_i2c->DR; // read last byte + rxbufhead = 0; + #undef rxbuf + #undef rxbufhead + #undef rxdepth + #undef rxbytes + + return(TRUE); // last byte read +} + + +void i2c_lld_master_start(I2CDriver *i2cp){ + i2cp->id_i2c->CR1 |= I2C_CR1_START; +} + +void i2c_lld_master_stop(I2CDriver *i2cp){ + i2cp->id_i2c->CR1 |= I2C_CR1_STOP; + chSysLock(); + while (i2cp->id_i2c->CR1 & I2C_CR1_STOP); + chSysUnlock(); +} + + +void i2c_lld_master_transmitI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg){ + //TODO: check txbytes <= sizeof(i2cscfg->txbuf) here, or in hylevel API + + i2cp->id_slave_config = i2cscfg; + i2cp->id_slave_config->rw_bit = I2C_WRITE; + + // generate start condition. Later transmission goes in background + i2c_lld_master_start(i2cp); +} + +void i2c_lld_master_receiveI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg){ + //TODO: check txbytes <= sizeof(i2cscfg->txbuf) here, or in hylevel API + + i2cp->id_slave_config = i2cscfg; + i2cp->id_slave_config->rw_bit = I2C_READ; + + // generate (re)start condition. Later connection goes asynchronously + i2c_lld_master_start(i2cp); +} + + + +/** + * @brief Transmits data ever the I2C bus as masteri2cp. + * + * @param[in] i2cp pointer to the @p I2CDriver object + * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object + * @param[in] restart bool. If TRUE then generate restart condition insted of stop + */ +void i2c_lld_master_transmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg, bool_t restart) { + //TODO: check txbytes <= sizeof(i2cscfg->txbuf) here, or in hylevel API + + int i = 0; + + i2cp->id_slave_config = i2cscfg; + i2cp->id_slave_config->rw_bit = I2C_WRITE; + + + i2cp->id_i2c->CR1 |= I2C_CR1_START; // generate start condition + while (!(i2cp->id_i2c->SR1 & I2C_SR1_SB)){ + i++; // wait Address sent + } + + i2cp->id_i2c->DR = (i2cp->id_slave_config->slave_addr1 << 1) | I2C_WRITE; // write slave addres in DR + while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR)){ + i++; // wait Address sent + } + i = i2cp->id_i2c->SR2; // TODO: check is it need to read this register for I2C to proper functionality + i = i2cp->id_i2c->SR1; //i2cp->id_i2c->SR1 &= (~I2C_SR1_ADDR); // clear ADDR bit + + // now write data byte by byte in DR register + uint32_t n = 0; + for (n = 0; n < i2cp->id_slave_config->txbytes; n++){ + i2cp->id_i2c->DR = i2cscfg->txbuf[n]; + while (!(i2cp->id_i2c->SR1 & I2C_SR1_TXE)){ + i++; + } + } + + while (!(i2cp->id_i2c->SR1 & I2C_SR1_BTF)){ + i++; + } + + if (restart){ + i2cp->id_i2c->CR1 |= I2C_CR1_START; // generate restart condition + while (!(i2cp->id_i2c->SR1 & I2C_SR1_SB)){ + i++; // wait start bit + } + } + else i2cp->id_i2c->CR1 |= I2C_CR1_STOP; // generate stop condition +} + + +/** + * @brief Receives data from the I2C bus. + * @details Before receive data from I2C slave you must manually sent them some + * control bytes first (refer to you device datasheet). + * + * @param[in] i2cp pointer to the @p I2CDriver object + * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object + */ +void i2c_lld_master_receive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg) { + + chSysLock(); + + i2cp->id_slave_config = i2cscfg; + + uint16_t i = 0; + uint16_t tmp = 0; + + // send slave addres with read-bit + i2cp->id_i2c->DR = (i2cp->id_slave_config->slave_addr1 << 1) | I2C_READ; + while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR)){ + i++; // wait Address sent + } + i = i2cp->id_i2c->SR2; // TODO: check is it need to read this register for I2C to proper functionality + i = i2cp->id_i2c->SR1; //i2cp->id_i2c->SR1 &= (~I2C_SR1_ADDR); // clear ADDR bit + + // set ACK bit + i2cp->id_i2c->CR1 |= I2C_CR1_ACK; + + // collect data from slave + for (i = 0; i < i2cp->id_slave_config->rxbytes; i++){ + if ((i2cp->id_slave_config->rxbytes - i) == 1){ // TODO: is it better <= in place of == ? + // clear ACK bit for automatically send NACK + i2cp->id_i2c->CR1 &= (~I2C_CR1_ACK);} + while (!(i2cp->id_i2c->SR1 & I2C_SR1_RXNE)){ + tmp++; + } + i2cp->id_slave_config->rxbuf[i] = i2cp->id_i2c->DR; + } + // generate STOP + i2cp->id_i2c->CR1 |= I2C_CR1_STOP; + + chSysUnlock(); +} + + + +#endif // HAL_USE_I2C diff --git a/os/hal/platforms/STM32/i2c_lld.h b/os/hal/platforms/STM32/i2c_lld.h new file mode 100644 index 000000000..7a8f468eb --- /dev/null +++ b/os/hal/platforms/STM32/i2c_lld.h @@ -0,0 +1,273 @@ +/** + * @file STM32/i2c_lld.h + * @brief STM32 I2C subsystem low level driver header. + * @addtogroup STM32_I2C + * @{ + */ + +#ifndef _I2C_LLD_H_ +#define _I2C_LLD_H_ + +#if HAL_USE_I2C || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @brief I2C1 driver enable switch. + * @details If set to @p TRUE the support for I2C1 is included. + * @note The default is @p TRUE. + */ +#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__) +#define STM32_I2C_USE_I2C1 TRUE +#endif + +/** + * @brief I2C2 driver enable switch. + * @details If set to @p TRUE the support for I2C2 is included. + * @note The default is @p TRUE. + */ +#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__) +#define STM32_I2C_USE_I2C2 TRUE +#endif + +/** + * @brief I2C1 interrupt priority level setting. + * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C1_IRQ_PRIORITY > @p PRIORITY_PENDSV. + */ +#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define STM32_I2C_I2C1_IRQ_PRIORITY 0xA0 +#endif + +/** + * @brief I2C2 interrupt priority level setting. + * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C2_IRQ_PRIORITY > @p PRIORITY_PENDSV. + */ +#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define STM32_I2C_I2C2_IRQ_PRIORITY 0xA0 +#endif + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +/** @brief No pending conditions.*/ +#define I2C_NO_ERROR 0 +/*@brief external Stop or Start condition during an address or a data transfer*/ +#define I2C_BUS_ERROR 1 +/** @brief */ +#define I2C_ARBITRATION_LOSS 2 +/** @brief */ +#define I2C_ACK_FAIL 4 +/** @brief */ +#define I2C_OVERRUN_UNDERRUN 8 +/** @brief */ +#define I2C_PEC_ERROR 16 +/** @brief */ +#define I2C_TIMEOUT 32 +/** @brief */ +#define I2C_SMBUS_ALERT 64 + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/** + * @brief Type of a structure representing an I2C driver. + */ +typedef struct I2CDriver I2CDriver; + +/** + * @brief Type of a structure representing an I2C driver. + */ +typedef struct I2CSlaveConfig I2CSlaveConfig; + + +/** + * @brief I2C notification callback type. + * @details This function must be used to send start or stop events to I2C bus, + * and change states of I2CDriver. + * + * @param[in] i2cp pointer to the @p I2CDriver object triggering the + * callback + * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object triggering the + * callback + */ +typedef void (*i2ccallback_t)(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg); + + +/** + * @brief I2C error notification callback type. + * + * @param[in] i2cp TODO: pointer to the @p I2CDriver object triggering the + * callback + */ +typedef void (*i2cerrorcallback_t)(void); + + +/** + * @brief Driver configuration structure. + */ +typedef struct { + /** + * @brief I2C initialization data. + */ + uint16_t i2cc_cr1; + uint16_t i2cc_cr2; + uint16_t i2cc_ccr; + uint16_t i2cc_trise; + +} I2CConfig; + + +/** + * @brief TODO: + */ +typedef uint32_t i2cflags_t; + +/** + * @brief TODO: + */ +typedef uint8_t i2cblock_t; + + +/** + * @brief Structure representing an I2C slave configuration. + * @details Each slave has its own data buffers, adress, and error flags. + */ +struct I2CSlaveConfig{ + /** + * @brief Callback pointer. + * @note Transfer finished callback. Invoke when all data transferred, or + * by DMA buffer events + * @p NULL then the callback is disabled. + */ + i2ccallback_t id_callback; + /** + * @brief Callback pointer. + * @note TODO: I don't know, when this callback is inwoked + * @p NULL then the callback is disabled. + */ + i2cerrorcallback_t id_err_callback; + + i2cblock_t *rxbuf; // pointer to buffer + size_t rxdepth; // depth of buffer + size_t rxbytes; // count of bytes to sent in one sending + size_t rxbufhead; // head pointer to current data byte + + i2cblock_t *txbuf; + size_t txdepth; + size_t txbytes; + size_t txbufhead; + + uint8_t slave_addr1; // 7-bit address of the slave + uint8_t slave_addr2; // used in 10-bit address mode + + uint16_t error_flags; + + uint8_t rw_bit; // this flag contain R/W bit + + bool_t restart; // send restart or stop event after complete data tx/rx + +#if I2C_USE_WAIT + /** + * @brief Thread waiting for I/O completion. + */ + Thread *thread; +#endif /* I2C_USE_WAIT */ +}; + + + +/** + * @brief Structure representing an I2C driver. + */ +struct I2CDriver{ + /** + * @brief Driver state. + */ + i2cstate_t id_state; +#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) +#if CH_USE_MUTEXES || defined(__DOXYGEN__) + /** + * @brief Mutex protecting the bus. + */ + Mutex id_mutex; +#elif CH_USE_SEMAPHORES + Semaphore id_semaphore; +#endif +#endif /* I2C_USE_MUTUAL_EXCLUSION */ + /** + * @brief Current configuration data. + */ + I2CConfig *id_config; + /** + * @brief Current slave configuration data. + */ + I2CSlaveConfig *id_slave_config; + + /* End of the mandatory fields.*/ + /** + * @brief Thread waiting for I/O completion. + */ + Thread *id_thread; + /** + * @brief Pointer to the I2Cx registers block. + */ + I2C_TypeDef *id_i2c; + +} ; + + + + + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +/** @cond never*/ +#if STM32_I2C_USE_I2C1 +extern I2CDriver I2CD1; +#endif + +#if STM32_I2C_USE_I2C2 +extern I2CDriver I2CD2; +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +void i2c_lld_init(void); +void i2c_lld_start(I2CDriver *i2cp); +void i2c_lld_stop(I2CDriver *i2cp); + +void i2c_lld_master_start(I2CDriver *i2cp); +void i2c_lld_master_stop(I2CDriver *i2cp); + +void i2c_lld_master_transmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg, bool_t restart); +void i2c_lld_master_transmitI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg); +bool_t i2c_lld_txbyte(I2CDriver *i2cp); // helper function + +void i2c_lld_master_receive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg); +void i2c_lld_master_receiveI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg); +bool_t i2c_lld_rxbyte(I2CDriver *i2cp); + +#ifdef __cplusplus +} +#endif +/** @endcond*/ + +#endif // CH_HAL_USE_I2C + +#endif // _I2C_LLD_H_ diff --git a/os/hal/platforms/STM32/i2c_lld_albi.c b/os/hal/platforms/STM32/i2c_lld_albi.c new file mode 100644 index 000000000..cd6a851db --- /dev/null +++ b/os/hal/platforms/STM32/i2c_lld_albi.c @@ -0,0 +1,574 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32/i2c_lld.c
+ * @brief STM32 I2C subsystem low level driver source. Slave mode not implemented.
+ * @addtogroup STM32_I2C
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief I2C1 driver identifier.*/
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+I2CDriver I2CD1;
+#endif
+
+/** @brief I2C2 driver identifier.*/
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+I2CDriver I2CD2;
+#endif
+
+
+static uint32_t i2c_get_event(I2CDriver *i2cp){
+ uint32_t regSR1 = i2cp->i2c_register->SR1;
+ uint32_t regSR2 = i2cp->i2c_register->SR2;
+ /* return the last event value from I2C status registers */
+ return (I2C_EV_MASK & (regSR1 | (regSR2 << 16)));
+}
+
+static void i2c_serve_event_interrupt(I2CDriver *i2cp) {
+ static __IO uint8_t *txBuffp, *rxBuffp, *datap;
+
+ I2C_TypeDef *dp = i2cp->i2c_register;
+
+ switch(i2c_get_event(i2cp)) {
+ case I2C_EV5_MASTER_MODE_SELECT:
+ i2cp->flags &= ~I2C_FLG_HEADER_SENT;
+ dp->DR = i2cp->slave_addr1;
+ break;
+ case I2C_EV9_MASTER_ADDR_10BIT:
+ if(i2cp->flags & I2C_FLG_MASTER_RECEIVER) {
+ i2cp->slave_addr1 |= 0x01;
+ i2cp->flags |= I2C_FLG_HEADER_SENT;
+ }
+ dp->DR = i2cp->slave_addr2;
+ break;
+ //------------------------------------------------------------------------
+ // Master Transmitter ----------------------------------------------------
+ //------------------------------------------------------------------------
+ case I2C_EV6_MASTER_TRA_MODE_SELECTED:
+ if(i2cp->flags & I2C_FLG_HEADER_SENT){
+ dp->CR1 |= I2C_CR1_START; // re-send the start in 10-Bit address mode
+ break;
+ }
+ //Initialize the transmit buffer pointer
+ txBuffp = (uint8_t*)i2cp->txbuf;
+ datap = txBuffp;
+ txBuffp++;
+ i2cp->remaining_bytes--;
+ /* If no further data to be sent, disable the I2C ITBUF in order to not have a TxE interrupt */
+ if(i2cp->remaining_bytes == 0) {
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+ }
+ //EV8_1 write the first data
+ dp->DR = *datap;
+ break;
+ case I2C_EV8_MASTER_BYTE_TRANSMITTING:
+ if(i2cp->remaining_bytes > 0) {
+ datap = txBuffp;
+ txBuffp++;
+ i2cp->remaining_bytes--;
+ if(i2cp->remaining_bytes == 0) {
+ /* If no further data to be sent, disable the ITBUF in order to not have a TxE interrupt */
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+ }
+ dp->DR = *datap;
+ }
+ break;
+ case I2C_EV8_2_MASTER_BYTE_TRANSMITTED:
+ dp->CR1 |= I2C_CR1_STOP; // stop generation
+ /* Disable ITEVT In order to not have again a BTF IT */
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN;
+ /* Portable I2C ISR code defined in the high level driver, note, it is a macro.*/
+ _i2c_isr_code(i2cp);
+ break;
+ //------------------------------------------------------------------------
+ // Master Receiver -------------------------------------------------------
+ //------------------------------------------------------------------------
+ case I2C_EV6_MASTER_REC_MODE_SELECTED:
+ chSysLockFromIsr();
+ switch(i2cp->flags & EV6_SUBEV_MASK) {
+ case I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED: // only an single byte to receive
+ /* Clear ACK */
+ dp->CR1 &= (uint16_t)~I2C_CR1_ACK;
+ /* Program the STOP */
+ dp->CR1 |= I2C_CR1_STOP;
+ break;
+ case I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED: // only two bytes to receive
+ /* Clear ACK */
+ dp->CR1 &= (uint16_t)~I2C_CR1_ACK;
+ /* Disable the ITBUF in order to have only the BTF interrupt */
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+ break;
+ }
+ chSysUnlockFromIsr();
+ /* Initialize receive buffer pointer */
+ rxBuffp = i2cp->rxbuf;
+ break;
+ case I2C_EV7_MASTER_REC_BYTE_RECEIVED:
+ if(i2cp->remaining_bytes != 3) {
+ /* Read the data register */
+ *rxBuffp = dp->DR;
+ rxBuffp++;
+ i2cp->remaining_bytes--;
+ switch(i2cp->remaining_bytes){
+ case 3:
+ /* Disable the ITBUF in order to have only the BTF interrupt */
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+ i2cp->flags |= I2C_FLG_3BTR;
+ break;
+ case 0:
+ /* Portable I2C ISR code defined in the high level driver, note, it is a macro.*/
+ _i2c_isr_code(i2cp);
+ break;
+ }
+ }
+ // when remaining 3 bytes do nothing, wait until RXNE and BTF are set (until 2 bytes are received)
+ break;
+ case I2C_EV7_MASTER_REC_BYTE_QUEUED:
+ switch(i2cp->flags & EV7_SUBEV_MASK) {
+ case I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS:
+ // DataN-2 and DataN-1 are received
+ chSysLockFromIsr();
+ dp->CR2 |= I2C_CR2_ITBUFEN;
+ /* Clear ACK */
+ dp->CR1 &= (uint16_t)~I2C_CR1_ACK;
+ /* Read the DataN-2*/
+ *rxBuffp = dp->DR; //This clear the RXE & BFT flags and launch the DataN reception in the shift register (ending the SCL stretch)
+ rxBuffp++;
+ /* Program the STOP */
+ dp->CR1 |= I2C_CR1_STOP;
+ /* Read the DataN-1 */
+ *rxBuffp = dp->DR;
+ chSysUnlockFromIsr();
+ rxBuffp++;
+ /* Decrement the number of readed bytes */
+ i2cp->remaining_bytes -= 2;
+ i2cp->flags = 0;
+ // ready for read DataN on the next EV7
+ break;
+ case I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS: // only for case of two bytes to be received
+ // DataN-1 and DataN are received
+ chSysLockFromIsr();
+ /* Program the STOP */
+ dp->CR1 |= I2C_CR1_STOP;
+ /* Read the DataN-1*/
+ *rxBuffp = dp->DR;
+ chSysUnlockFromIsr();
+ rxBuffp++;
+ /* Read the DataN*/
+ *rxBuffp = dp->DR;
+ i2cp->remaining_bytes = 0;
+ i2cp->flags = 0;
+ /* Portable I2C ISR code defined in the high level driver, note, it is a macro.*/
+ _i2c_isr_code(i2cp);
+ break;
+ }
+ break;
+ }
+}
+
+static void i2c_serve_error_interrupt(I2CDriver *i2cp) {
+ i2cflags_t flags;
+ I2C_TypeDef *reg;
+
+ reg = i2cp->i2c_register;
+ flags = I2CD_NO_ERROR;
+
+ if(reg->SR1 & I2C_SR1_BERR) { // Bus error
+ reg->SR1 &= ~I2C_SR1_BERR;
+ flags |= I2CD_BUS_ERROR;
+ }
+ if(reg->SR1 & I2C_SR1_ARLO) { // Arbitration lost
+ reg->SR1 &= ~I2C_SR1_ARLO;
+ flags |= I2CD_ARBITRATION_LOST;
+ }
+ if(reg->SR1 & I2C_SR1_AF) { // Acknowledge fail
+ reg->SR1 &= ~I2C_SR1_AF;
+ reg->CR1 |= I2C_CR1_STOP; // setting stop bit
+ flags |= I2CD_ACK_FAILURE;
+ }
+ if(reg->SR1 & I2C_SR1_OVR) { // Overrun
+ reg->SR1 &= ~I2C_SR1_OVR;
+ flags |= I2CD_OVERRUN;
+ }
+ if(reg->SR1 & I2C_SR1_PECERR) { // PEC error
+ reg->SR1 &= ~I2C_SR1_PECERR;
+ flags |= I2CD_PEC_ERROR;
+ }
+ if(reg->SR1 & I2C_SR1_TIMEOUT) { // SMBus Timeout
+ reg->SR1 &= ~I2C_SR1_TIMEOUT;
+ flags |= I2CD_TIMEOUT;
+ }
+ if(reg->SR1 & I2C_SR1_SMBALERT) { // SMBus alert
+ reg->SR1 &= ~I2C_SR1_SMBALERT;
+ flags |= I2CD_SMB_ALERT;
+ }
+
+ if(flags != I2CD_NO_ERROR) {
+ // send communication end signal
+ _i2c_isr_code(i2cp);
+ chSysLockFromIsr();
+ i2cAddFlagsI(i2cp, flags);
+ chSysUnlockFromIsr();
+ }
+}
+
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+/**
+ * @brief I2C1 event interrupt handler.
+ */
+CH_IRQ_HANDLER(I2C1_EV_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_event_interrupt(&I2CD1);
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C1 error interrupt handler.
+ */
+CH_IRQ_HANDLER(I2C1_ER_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_error_interrupt(&I2CD1);
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+/**
+ * @brief I2C2 event interrupt handler.
+ */
+CH_IRQ_HANDLER(I2C2_EV_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_event_interrupt(&I2CD2);
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C2 error interrupt handler.
+ */
+CH_IRQ_HANDLER(I2C2_ER_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_error_interrupt(&I2CD2);
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+void i2c_lld_reset(I2CDriver *i2cp){
+ chDbgCheck((i2cp->state == I2C_STOP)||(i2cp->state == I2C_READY),
+ "i2c_lld_reset: invalid state");
+
+ RCC->APB1RSTR = RCC_APB1RSTR_I2C1RST; // reset I2C 1
+ RCC->APB1RSTR = 0;
+}
+
+void i2c_lld_set_clock(I2CDriver *i2cp, int32_t clock_speed, I2C_DutyCycle_t duty) {
+ volatile uint16_t regCCR, regCR2, freq, clock_div;
+ volatile uint16_t pe_bit_saved;
+
+ chDbgCheck((i2cp != NULL) && (clock_speed > 0) && (clock_speed <= 4000000),
+ "i2c_lld_set_clock");
+
+ /*---------------------------- CR2 Configuration ------------------------*/
+ /* Get the I2Cx CR2 value */
+ regCR2 = i2cp->i2c_register->CR2;
+ /* Clear frequency FREQ[5:0] bits */
+ regCR2 &= (uint16_t)~I2C_CR2_FREQ;
+ /* Set frequency bits depending on pclk1 value */
+ freq = (uint16_t)(STM32_PCLK1 / 1000000);
+ chDbgCheck((freq >= 2) && (freq <= 36),
+ "i2c_lld_set_clock() : Peripheral clock freq. out of range");
+ regCR2 |= freq;
+ i2cp->i2c_register->CR2 = regCR2;
+
+ /*---------------------------- CCR Configuration ------------------------*/
+ pe_bit_saved = (i2cp->i2c_register->CR1 & I2C_CR1_PE);
+ /* Disable the selected I2C peripheral to configure TRISE */
+ i2cp->i2c_register->CR1 &= (uint16_t)~I2C_CR1_PE;
+
+ /* Clear F/S, DUTY and CCR[11:0] bits */
+ regCCR = 0;
+ clock_div = I2C_CCR_CCR;
+ /* Configure clock_div in standard mode */
+ if (clock_speed <= 100000) {
+ chDbgAssert(duty == stdDutyCycle,
+ "i2c_lld_set_clock(), #3", "Invalid standard mode duty cycle");
+ /* Standard mode clock_div calculate: Tlow/Thigh = 1/1 */
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 2));
+ /* Test if CCR value is under 0x4, and set the minimum allowed value */
+ if (clock_div < 0x04) clock_div = 0x04;
+ /* Set clock_div value for standard mode */
+ regCCR |= (clock_div & I2C_CCR_CCR);
+ /* Set Maximum Rise Time for standard mode */
+ i2cp->i2c_register->TRISE = freq + 1;
+ }
+ /* Configure clock_div in fast mode */
+ else if(clock_speed <= 400000) {
+ chDbgAssert((duty == fastDutyCycle_2) || (duty == fastDutyCycle_16_9),
+ "i2c_lld_set_clock(), #3", "Invalid fast mode duty cycle");
+ if(duty == fastDutyCycle_2) {
+ /* Fast mode clock_div calculate: Tlow/Thigh = 2/1 */
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 3));
+ }
+ else if(duty == fastDutyCycle_16_9) {
+ /* Fast mode clock_div calculate: Tlow/Thigh = 16/9 */
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 25));
+ /* Set DUTY bit */
+ regCCR |= I2C_CCR_DUTY;
+ }
+ /* Test if CCR value is under 0x1, and set the minimum allowed value */
+ if(clock_div < 0x01) clock_div = 0x01;
+ /* Set clock_div value and F/S bit for fast mode*/
+ regCCR |= (I2C_CCR_FS | (clock_div & I2C_CCR_CCR));
+ /* Set Maximum Rise Time for fast mode */
+ i2cp->i2c_register->TRISE = (freq * 300 / 1000) + 1;
+ }
+ chDbgAssert((clock_div <= I2C_CCR_CCR),
+ "i2c_lld_set_clock(), #2", "Too low clock clock speed selected");
+
+ /* Write to I2Cx CCR */
+ i2cp->i2c_register->CCR = regCCR;
+
+ /* restore the I2C peripheral enabled state */
+ i2cp->i2c_register->CR1 |= pe_bit_saved;
+}
+
+void i2c_lld_set_opmode(I2CDriver *i2cp, I2C_opMode_t opmode) {
+ uint16_t regCR1;
+
+ /*---------------------------- CR1 Configuration ------------------------*/
+ /* Get the I2Cx CR1 value */
+ regCR1 = i2cp->i2c_register->CR1;
+ switch(opmode){
+ case opmodeI2C:
+ regCR1 &= (uint16_t)~(I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+ break;
+ case opmodeSMBusDevice:
+ regCR1 |= I2C_CR1_SMBUS;
+ regCR1 &= (uint16_t)~(I2C_CR1_SMBTYPE);
+ break;
+ case opmodeSMBusHost:
+ regCR1 |= (I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+ break;
+ }
+ /* Write to I2Cx CR1 */
+ i2cp->i2c_register->CR1 = regCR1;
+}
+
+void i2c_lld_set_own_address(I2CDriver *i2cp, int16_t address, int8_t nbit_addr) {
+ /*---------------------------- OAR1 Configuration -----------------------*/
+ /* Set the Own Address1 and bit number address acknowledged */
+ i2cp->i2c_register->OAR1 = address & I2C_OAR1_ADD0_9;
+ switch(nbit_addr) {
+ case 10:
+ i2cp->i2c_register->OAR1 |= I2C_OAR1_ADDMODE; // set ADDMODE bit and bit 14.
+ case 7:
+ i2cp->i2c_register->OAR1 |= I2C_OAR1_BIT14; // set only bit 14.
+ }
+}
+
+/**
+ * @brief Low level I2C driver initialization.
+ */
+void i2c_lld_init(void) {
+
+#if STM32_I2C_USE_I2C1
+ RCC->APB1RSTR = RCC_APB1RSTR_I2C1RST; // reset I2C 1
+ RCC->APB1RSTR = 0;
+ i2cObjectInit(&I2CD1);
+ I2CD1.i2c_register = I2C1;
+#endif
+#if STM32_I2C_USE_I2C2
+ RCC->APB1RSTR = RCC_APB1RSTR_I2C2RST; // reset I2C 2
+ RCC->APB1RSTR = 0;
+ i2cObjectInit(&I2CD2);
+ I2CD2.i2c_register = I2C2;
+#endif
+}
+
+/**
+ * @brief Configures and activates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_start(I2CDriver *i2cp) {
+ chDbgCheck((i2cp->state == I2C_STOP)||(i2cp->state == I2C_READY),
+ "i2c_lld_start: invalid state");
+
+ /* If in stopped state then enables the I2C clock.*/
+ if (i2cp->state == I2C_STOP) {
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ NVICEnableVector(I2C1_EV_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY);
+ NVICEnableVector(I2C1_ER_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY);
+ RCC->APB1ENR |= RCC_APB1ENR_I2C1EN; // I2C 1 clock enable
+ }
+#endif
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ NVICEnableVector(I2C2_EV_IRQn, STM32_I2C_I2C2_IRQ_PRIORITY);
+ NVICEnableVector(I2C2_ER_IRQn, STM32_I2C_I2C2_IRQ_PRIORITY);
+ RCC->APB1ENR |= RCC_APB1ENR_I2C2EN; // I2C 2 clock enable
+ }
+#endif
+ i2cp->i2c_register->CR1 |= I2C_CR1_PE; // enable I2C peripheral
+ }
+}
+
+/**
+ * @brief Deactivates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_stop(I2CDriver *i2cp) {
+
+ chDbgCheck((i2cp->state == I2C_READY),
+ "i2c_lld_stop: invalid state");
+
+ /* I2C disable.*/
+ i2cp->i2c_register->CR1 = 0;
+
+ /* If in ready state then disables the I2C clock.*/
+ if (i2cp->state == I2C_READY) {
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ NVICDisableVector(I2C1_EV_IRQn);
+ NVICDisableVector(I2C1_ER_IRQn);
+ RCC->APB1ENR &= ~RCC_APB1ENR_I2C1EN;
+ }
+#endif
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ NVICDisableVector(I2C2_EV_IRQn);
+ NVICDisableVector(I2C2_ER_IRQn);
+ RCC->APB1ENR &= ~RCC_APB1ENR_I2C2EN;
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Transmits data ever the I2C bus as master.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] n number of words to send
+ * @param[in] slave_addr1 the 7-bit address of the slave (should be aligned to left)
+ * @param[in] slave_addr2 used in 10 bit address mode
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ */
+void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *txbuf) {
+
+ // enable ERR, EVT & BUF ITs
+ i2cp->i2c_register->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN);
+ i2cp->i2c_register->CR1 &= ~I2C_CR1_POS;
+
+ switch(i2cp->nbit_address){
+ case 7:
+ i2cp->slave_addr1 = ((slave_addr <<1) & 0x00FE); // LSB = 0 -> write
+ break;
+ case 10:
+ i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); // add the two msb of 10-bit address to the header
+ i2cp->slave_addr1 |= 0xF0; // add the header bits with LSB = 0 -> write
+ i2cp->slave_addr2 = slave_addr & 0x00FF; // the remaining 8 bit of 10-bit address
+ break;
+ }
+
+ i2cp->txbuf = txbuf;
+ i2cp->remaining_bytes = n;
+ i2cp->flags = 0;
+ i2cp->errors = 0;
+
+ i2cp->i2c_register->CR1 |= I2C_CR1_START; // send start bit
+
+#if !I2C_USE_WAIT
+ /* Wait until the START condition is generated on the bus: the START bit is cleared by hardware */
+ uint32_t tmo = 0xfffff;
+ while((i2cp->i2c_register->CR1 & I2C_CR1_START) && tmo--)
+ ;
+#endif /* I2C_USE_WAIT */
+}
+
+/**
+ * @brief Receives data from the I2C bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] slave_addr1 7-bit address of he slave
+ * @param[in] slave_addr2 used in 10-bit address mode
+ * @param[in] n number of words to receive
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ */
+void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *rxbuf) {
+ // enable ERR, EVT & BUF ITs
+ i2cp->i2c_register->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN);
+ i2cp->i2c_register->CR1 |= I2C_CR1_ACK; // acknowledge returned
+ i2cp->i2c_register->CR1 &= ~I2C_CR1_POS;
+
+ switch(i2cp->nbit_address){
+ case 7:
+ i2cp->slave_addr1 = ((slave_addr <<1) | 0x01); // LSB = 1 -> receive
+ break;
+ case 10:
+ i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); // add the two msb of 10-bit address to the header
+ i2cp->slave_addr1 |= 0xF0; // add the header bits (the LSB -> 1 will be add to second
+ i2cp->slave_addr2 = slave_addr & 0x00FF; // the remaining 8 bit of 10-bit address
+ break;
+ }
+
+ i2cp->rxbuf = rxbuf;
+ i2cp->remaining_bytes = n;
+ i2cp->flags = I2C_FLG_MASTER_RECEIVER;
+ i2cp->errors = 0;
+
+ // Only one byte to be received
+ if(i2cp->remaining_bytes == 1) {
+ i2cp->flags |= I2C_FLG_1BTR;
+ }
+ // Only two bytes to be received
+ else if(i2cp->remaining_bytes == 2) {
+ i2cp->flags |= I2C_FLG_2BTR;
+ i2cp->i2c_register->CR1 |= I2C_CR1_POS; // Acknowledge Position
+ }
+
+ i2cp->i2c_register->CR1 |= I2C_CR1_START; // send start bit
+
+#if !I2C_USE_WAIT
+ /* Wait until the START condition is generated on the bus: the START bit is cleared by hardware */
+ uint32_t tmo = 0xfffff;
+ while((i2cp->i2c_register->CR1 & I2C_CR1_START) && tmo--)
+ ;
+#endif /* I2C_USE_WAIT */
+}
+
+#endif // HAL_USE_I2C
+
diff --git a/os/hal/platforms/STM32/i2c_lld_albi.h b/os/hal/platforms/STM32/i2c_lld_albi.h new file mode 100644 index 000000000..2b63afec9 --- /dev/null +++ b/os/hal/platforms/STM32/i2c_lld_albi.h @@ -0,0 +1,263 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+/**
+ * @file STM32/i2c_lld.h
+ * @brief STM32 I2C subsystem low level driver header.
+ * @addtogroup STM32_I2C
+ * @{
+ */
+
+#ifndef _I2C_LLD_H_
+#define _I2C_LLD_H_
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+#define I2C_OAR1_ADD0_9 ((uint16_t)0x03FF) /*!<Interface Address */
+#define I2C_OAR1_BIT14 ((uint16_t)0x4000) /*!<bit 14 should always be kept at 1. */
+
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief I2C1 driver enable switch.
+ * @details If set to @p TRUE the support for I2C1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C1 TRUE
+#endif
+
+/**
+ * @brief I2C2 driver enable switch.
+ * @details If set to @p TRUE the support for I2C2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C2 TRUE
+#endif
+
+/**
+ * @brief I2C1 interrupt priority level setting.
+ * @note @p BASEPRI_KERNEL >= @p STM32_I2C1_IRQ_PRIORITY > @p PRIORITY_PENDSV.
+ */
+#if !defined(STM32_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C1_IRQ_PRIORITY 0xA0
+#endif
+
+/**
+ * @brief I2C2 interrupt priority level setting.
+ * @note @p BASEPRI_KERNEL >= @p STM32_I2C2_IRQ_PRIORITY > @p PRIORITY_PENDSV.
+ */
+#if !defined(STM32_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C2_IRQ_PRIORITY 0xA0
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/** @brief EV5 */
+#define I2C_EV5_MASTER_MODE_SELECT ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_SB)) /* BUSY, MSL and SB flag */
+/** @brief EV6 */
+#define I2C_EV6_MASTER_TRA_MODE_SELECTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_ADDR|I2C_SR1_TXE)) /* BUSY, MSL, ADDR, TXE and TRA flags */
+#define I2C_EV6_MASTER_REC_MODE_SELECTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_ADDR)) /* BUSY, MSL and ADDR flags */
+/** @brief EV7 */
+#define I2C_EV7_MASTER_REC_BYTE_RECEIVED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_RXNE)) /* BUSY, MSL and RXNE flags */
+#define I2C_EV7_MASTER_REC_BYTE_QUEUED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_BTF|I2C_SR1_RXNE)) /* BUSY, MSL, RXNE and BTF flags*/
+/** @brief EV8 */
+#define I2C_EV8_MASTER_BYTE_TRANSMITTING ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_TXE)) /* TRA, BUSY, MSL, TXE flags */
+/** @brief EV8_2 */
+#define I2C_EV8_2_MASTER_BYTE_TRANSMITTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_BTF|I2C_SR1_TXE)) /* TRA, BUSY, MSL, TXE and BTF flags */
+/** @brief EV9 */
+#define I2C_EV9_MASTER_ADDR_10BIT ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_ADD10)) /* BUSY, MSL and ADD10 flags */
+#define I2C_EV_MASK 0x00FFFFFF
+
+#define I2C_FLG_1BTR 0x01 // Single byte to be received and processed
+#define I2C_FLG_2BTR 0x02 // Two bytes to be received and processed
+#define I2C_FLG_3BTR 0x04 // Last three received bytes to be processed
+#define I2C_FLG_MASTER_RECEIVER 0x10
+#define I2C_FLG_HEADER_SENT 0x80
+
+#define EV6_SUBEV_MASK (I2C_FLG_1BTR|I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER)
+#define EV7_SUBEV_MASK (I2C_FLG_2BTR|I2C_FLG_3BTR|I2C_FLG_MASTER_RECEIVER)
+
+#define I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED (I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER)
+#define I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED (I2C_FLG_1BTR|I2C_FLG_MASTER_RECEIVER)
+#define I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS (I2C_FLG_3BTR|I2C_FLG_MASTER_RECEIVER)
+#define I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS (I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER)
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+/**
+ * @brief Serial Driver condition flags type.
+ */
+typedef uint32_t i2cflags_t;
+
+typedef enum {
+ opmodeI2C,
+ opmodeSMBusDevice,
+ opmodeSMBusHost,
+} I2C_opMode_t;
+
+typedef enum {
+ stdDutyCycle,
+ fastDutyCycle_2,
+ fastDutyCycle_16_9,
+} I2C_DutyCycle_t;
+
+/**
+ * @brief Type of a structure representing an SPI driver.
+ */
+typedef struct I2CDriver I2CDriver;
+
+/**
+ * @brief I2C notification callback type.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object triggering the
+ * callback
+ */
+typedef void (*i2ccallback_t)(I2CDriver *i2cp);
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ I2C_opMode_t opMode; /*!< Specifies the I2C mode.*/
+
+ uint32_t ClockSpeed; /*!< Specifies the clock frequency. Must be set to a value lower than 400kHz */
+
+ I2C_DutyCycle_t FastModeDutyCycle; /*!< Specifies the I2C fast mode duty cycle */
+
+ uint16_t OwnAddress1; /*!< Specifies the first device own address. Can be a 7-bit or 10-bit address. */
+
+ uint16_t Ack; /*!< Enables or disables the acknowledgement. */
+
+ uint8_t nBitAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged */
+
+} I2CConfig;
+
+/**
+ * @brief Structure representing an I2C driver.
+ */
+struct I2CDriver {
+ /**
+ * @brief Driver state.
+ */
+ i2cstate_t state;
+ /**
+ * @brief Operation complete callback or @p NULL.
+ */
+ i2ccallback_t endcb;
+#if I2C_USE_WAIT
+ /**
+ * @brief Thread waiting for I/O completion.
+ */
+ Thread *thread;
+#endif /* I2C_USE_WAIT */
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+#if CH_USE_MUTEXES || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the bus.
+ */
+ Mutex mutex;
+#elif CH_USE_SEMAPHORES
+ Semaphore semaphore;
+#endif
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the I2Cx registers block.
+ */
+ I2C_TypeDef *i2c_register;
+ size_t remaining_bytes;
+ uint8_t *rxbuf;
+ uint8_t *txbuf;
+ uint8_t slave_addr1; // 7-bit address of the slave
+ uint8_t slave_addr2; // used in 10-bit address mode
+ uint8_t nbit_address;
+ i2cflags_t errors;
+ i2cflags_t flags;
+ /* Status Change @p EventSource.*/
+ EventSource sevent;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+#define i2c_lld_bus_is_busy(i2cp) \
+ (i2cp->i2c_register->SR2 & I2C_SR2_BUSY)
+
+
+/* Wait until BUSY flag is reset: a STOP has been generated on the bus
+ * signaling the end of transmission
+ */
+#define i2c_lld_wait_bus_free(i2cp) { \
+ uint32_t tmo = 0xffff; \
+ while((i2cp->i2c_register->SR2 & I2C_SR2_BUSY) && tmo--) \
+ ; \
+}
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+/** @cond never*/
+#if STM32_I2C_USE_I2C1
+extern I2CDriver I2CD1;
+#endif
+
+#if STM32_I2C_USE_I2C2
+extern I2CDriver I2CD2;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void i2c_lld_init(void);
+void i2c_lld_reset(I2CDriver *i2cp);
+void i2c_lld_set_clock(I2CDriver *i2cp, int32_t clock_speed, I2C_DutyCycle_t duty);
+void i2c_lld_set_opmode(I2CDriver *i2cp, I2C_opMode_t opmode);
+void i2c_lld_set_own_address(I2CDriver *i2cp, int16_t address, int8_t nr_bit);
+void i2c_lld_start(I2CDriver *i2cp);
+void i2c_lld_stop(I2CDriver *i2cp);
+void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *txbuf);
+void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *rxbuf);
+
+#ifdef __cplusplus
+}
+#endif
+/** @endcond*/
+
+#endif // CH_HAL_USE_I2C
+
+#endif // _I2C_LLD_H_
diff --git a/os/hal/platforms/STM32/i2c_lld_brts.c b/os/hal/platforms/STM32/i2c_lld_brts.c new file mode 100644 index 000000000..9e519d412 --- /dev/null +++ b/os/hal/platforms/STM32/i2c_lld_brts.c @@ -0,0 +1,462 @@ +/** + * @file STM32/i2c_lld.c + * @brief STM32 I2C subsystem low level driver source. Slave mode not implemented. + * @addtogroup STM32_I2C + * @{ + */ + +#include "ch.h" +#include "hal.h" +#include "i2c_lld.h" + +#if HAL_USE_I2C || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/** @brief I2C1 driver identifier.*/ +#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__) +I2CDriver I2CD1; +#endif + +/** @brief I2C2 driver identifier.*/ +#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__) +I2CDriver I2CD2; +#endif + +/*===========================================================================*/ +/* Driver local variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +/** + * @brief TODO: Status bits translation. + * + * @param[in] sr USART SR register value + * + * @return The error flags. + */ +static i2cflags_t translate_i2c_errors(uint16_t sr) { + i2cflags_t sts = 0; + + if (sr & USART_SR_ORE) + sts |= UART_OVERRUN_ERROR; + if (sr & USART_SR_PE) + sts |= UART_PARITY_ERROR; + if (sr & USART_SR_FE) + sts |= UART_FRAMING_ERROR; + if (sr & USART_SR_NE) + sts |= UART_NOISE_ERROR; + if (sr & USART_SR_LBD) + sts |= UART_BREAK_DETECTED; + return sts; +} + + +static void i2c_serve_error_interrupt(I2CDriver *i2cp) { + // TODO:remove this stub and write normal handler + // this is simply trap for errors + while TRUE{ + translate_i2c_errors(i2cp->id_i2c->SR1); + } +} + +/* This function handle all regular interrupt conditions + * TODO: 10 bit address handling here + */ +static void i2c_serve_event_interrupt(I2CDriver *i2cp) { + int i = 0; + int n = 0; + int m = 0; + + if ((i2cp->id_state == I2C_READY) && (i2cp->id_i2c->SR1 & I2C_SR1_SB)){// start bit sent + //i = i2cp->id_i2c->SR1; + i2cp->id_state = I2C_MACTIVE; + i2cp->id_i2c->DR = (i2cp->id_slave_config->slave_addr1 << 1) | + i2cp->id_slave_config->rw_bit; // write slave address in DR + return; + } + + // now "wait" interrupt with ADDR flag + if ((i2cp->id_state == I2C_MACTIVE) && (i2cp->id_i2c->SR1 & I2C_SR1_ADDR)){// address successfully sent + if(i2cp->id_i2c->SR2 & I2C_SR2_TRA){ + i2c_lld_txbyte(i2cp); // send first byte + i2cp->id_state = I2C_MTRANSMIT; // change state + return; + } + else { + /* In order to generate the non-acknowledge pulse after the last received + * data byte, the ACK bit must be cleared just after reading the second + * last data byte (after second last RxNE event). + */ + if (i2cp->id_slave_config->rxbytes > 1) + i2cp->id_i2c->CR1 |= I2C_CR1_ACK; // set ACK bit + i2cp->id_state = I2C_MRECEIVE; // change status + return; + } + } + + // transmitting bytes one by one + if ((i2cp->id_state == I2C_MTRANSMIT) && (i2cp->id_i2c->SR1 & I2C_SR1_TXE)){ + if (i2c_lld_txbyte(i2cp)) + i2cp->id_state = I2C_MWAIT_TF; // last byte written + return; + } + + //receiving bytes one by one + if ((i2cp->id_state == I2C_MRECEIVE) && (i2cp->id_i2c->SR1 & I2C_SR1_RXNE)){ +// i = i2cp->id_i2c->SR1; +// n = i2cp->id_i2c->SR2; + if (i2c_lld_rxbyte(i2cp)) + i2cp->id_state = I2C_MWAIT_TF; // last byte read +// i = i2cp->id_i2c->SR1; +// n = i2cp->id_i2c->SR2; + return; + } + + // "wait" BTF bit in status register +// if ((i2cp->id_state == I2C_MWAIT_TF) && (i2cp->id_i2c->SR1 & I2C_SR1_BTF)){ + if ((i2cp->id_state == I2C_MWAIT_TF) && (i2cp->id_i2c->SR1 & I2C_SR1_RXNE | I2C_SR1_BTF | I2C_SR1_TXE)){ + chSysLockFromIsr(); + i2cp->id_slave_config->id_callback(i2cp, i2cp->id_slave_config); + + i = i2cp->id_i2c->SR1; + n = i2cp->id_i2c->SR2; + m = i2cp->id_i2c->CR1; + + chSysUnlockFromIsr(); + return; + } + else{ // trap + i = i2cp->id_i2c->SR1; + n = i2cp->id_i2c->SR2; + m = i2cp->id_i2c->CR1; + return; + } +} + + +#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__) +/** + * @brief I2C1 event interrupt handler. + */ +CH_IRQ_HANDLER(VectorBC) { + + CH_IRQ_PROLOGUE(); + i2c_serve_event_interrupt(&I2CD1); + CH_IRQ_EPILOGUE(); +} + +/** + * @brief I2C1 error interrupt handler. + */ +CH_IRQ_HANDLER(VectorC0) { + + CH_IRQ_PROLOGUE(); + i2c_serve_error_interrupt(&I2CD1); + CH_IRQ_EPILOGUE(); +} +#endif + +#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__) +/** + * @brief I2C2 event interrupt handler. + */ +CH_IRQ_HANDLER(VectorC4) { + + CH_IRQ_PROLOGUE(); + i2c_serve_event_interrupt(&I2CD2); + CH_IRQ_EPILOGUE(); +} + +/** + * @brief I2C2 error interrupt handler. + */ +CH_IRQ_HANDLER(VectorC8) { + + CH_IRQ_PROLOGUE(); + i2c_serve_error_interrupt(&I2CD2); + CH_IRQ_EPILOGUE(); +} +#endif + +/** + * @brief Low level I2C driver initialization. + */ +void i2c_lld_init(void) { + +#if STM32_I2C_USE_I2C1 + RCC->APB1RSTR = RCC_APB1RSTR_I2C1RST; // reset I2C 1 + RCC->APB1RSTR = 0; + i2cObjectInit(&I2CD1); + I2CD1.id_i2c = I2C1; +#endif + +#if STM32_I2C_USE_I2C2 + RCC->APB1RSTR = RCC_APB1RSTR_I2C2RST; // reset I2C 2 + RCC->APB1RSTR = 0; + i2cObjectInit(&I2CD2); + I2CD2.id_i2c = I2C2; +#endif +} + +/** + * @brief Configures and activates the I2C peripheral. + * + * @param[in] i2cp pointer to the @p I2CDriver object + */ +void i2c_lld_start(I2CDriver *i2cp) { + + /* If in stopped state then enables the I2C clock.*/ + if (i2cp->id_state == I2C_STOP) { +#if STM32_I2C_USE_I2C1 + if (&I2CD1 == i2cp) { + NVICEnableVector(I2C1_EV_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY); + NVICEnableVector(I2C1_ER_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY); + RCC->APB1ENR |= RCC_APB1ENR_I2C1EN; // I2C 1 clock enable + } +#endif +#if STM32_I2C_USE_I2C2 + if (&I2CD2 == i2cp) { + NVICEnableVector(I2C2_EV_IRQn, STM32_I2C2_IRQ_PRIORITY); + NVICEnableVector(I2C2_ER_IRQn, STM32_I2C2_IRQ_PRIORITY); + RCC->APB1ENR |= RCC_APB1ENR_I2C2EN; // I2C 2 clock enable + } +#endif + } + + /* I2C setup.*/ + i2cp->id_i2c->CR1 = I2C_CR1_SWRST; // reset i2c peripherial + i2cp->id_i2c->CR1 = 0; + + i2cp->id_i2c->CR1 = i2cp->id_config->i2cc_cr1; + i2cp->id_i2c->CR2 = i2cp->id_config->i2cc_cr2 | + I2C_CR2_ITERREN | + I2C_CR2_ITEVTEN | + I2C_CR2_ITBUFEN | + 36; //TODO: replace this by macro calculation + /* TODO: + * 1. macro timing calculator + * 2. parameter checker + * 3. definitions in halconf.h: i2c-freq, i2c_mode, etc + * 4. trise time calculator/checker + */ + i2cp->id_i2c->CCR = i2cp->id_config->i2cc_ccr | 180; + i2cp->id_i2c->TRISE = i2cp->id_config->i2cc_trise | 37; + i2cp->id_i2c->CR1 |= 1; // enable interface +} + +/** + * @brief Deactivates the I2C peripheral. + * + * @param[in] i2cp pointer to the @p I2CDriver object + */ +void i2c_lld_stop(I2CDriver *i2cp) { + + /* If in ready state then disables the I2C clock.*/ + if (i2cp->id_state == I2C_READY) { +#if STM32_I2C_USE_I2C1 + if (&I2CD1 == i2cp) { + NVICDisableVector(I2C1_EV_IRQn); + NVICDisableVector(I2C1_ER_IRQn); + RCC->APB1ENR &= ~RCC_APB1ENR_I2C1EN; + } +#endif +#if STM32_I2C_USE_I2C2 + if (&I2CD2 == i2cp) { + NVICDisableVector(I2C2_EV_IRQn); + NVICDisableVector(I2C2_ER_IRQn); + RCC->APB1ENR &= ~RCC_APB1ENR_I2C2EN; + } +#endif + } + i2cp->id_state = I2C_STOP; +} + + +/* helper function, not API + * write bytes in DR register + * return TRUE if last byte written + */ +bool_t i2c_lld_txbyte(I2CDriver *i2cp) { + if (i2cp->id_slave_config->txbufhead < i2cp->id_slave_config->txbytes){ + i2cp->id_i2c->DR = i2cp->id_slave_config->txbuf[i2cp->id_slave_config->txbufhead]; + (i2cp->id_slave_config->txbufhead)++; + return(FALSE); + } + i2cp->id_slave_config->txbufhead = 0; + return(TRUE); // last byte written +} + + +/* helper function, not API + * read bytes from DR register + * return TRUE if last byte read + */ +bool_t i2c_lld_rxbyte(I2CDriver *i2cp) { + // temporal variables + #define rxbuf i2cp->id_slave_config->rxbuf + #define rxbufhead i2cp->id_slave_config->rxbufhead + #define rxdepth i2cp->id_slave_config->rxdepth + #define rxbytes i2cp->id_slave_config->rxbytes + + /* In order to generate the non-acknowledge pulse after the last received + * data byte, the ACK bit must be cleared just after reading the second + * last data byte (after second last RxNE event). + */ + if (rxbufhead < rxbytes){ + rxbuf[rxbufhead] = i2cp->id_i2c->DR; + if ((rxbytes - rxbufhead) <= 2){ + i2cp->id_i2c->CR1 &= (~I2C_CR1_ACK);// clear ACK bit for automatically send NACK + } + rxbufhead++; + return(FALSE); + } + + rxbuf[rxbufhead] = i2cp->id_i2c->DR; // read last byte + rxbufhead = 0; + #undef rxbuf + #undef rxbufhead + #undef rxdepth + #undef rxbytes + + return(TRUE); // last byte read +} + + +void i2c_lld_master_start(I2CDriver *i2cp){ + i2cp->id_i2c->CR1 |= I2C_CR1_START; +} + +void i2c_lld_master_stop(I2CDriver *i2cp){ + i2cp->id_i2c->CR1 |= I2C_CR1_STOP; + chSysLock(); + while (i2cp->id_i2c->CR1 & I2C_CR1_STOP); + chSysUnlock(); +} + + +void i2c_lld_master_transmitI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg){ + //TODO: check txbytes <= sizeof(i2cscfg->txbuf) here, or in hylevel API + + i2cp->id_slave_config = i2cscfg; + i2cp->id_slave_config->rw_bit = I2C_WRITE; + + // generate start condition. Later transmission goes in background + i2c_lld_master_start(i2cp); +} + +void i2c_lld_master_receiveI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg){ + //TODO: check txbytes <= sizeof(i2cscfg->txbuf) here, or in hylevel API + + i2cp->id_slave_config = i2cscfg; + i2cp->id_slave_config->rw_bit = I2C_READ; + + // generate (re)start condition. Later connection goes asynchronously + i2c_lld_master_start(i2cp); +} + + + +/** + * @brief Transmits data ever the I2C bus as masteri2cp. + * + * @param[in] i2cp pointer to the @p I2CDriver object + * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object + * @param[in] restart bool. If TRUE then generate restart condition insted of stop + */ +void i2c_lld_master_transmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg, bool_t restart) { + //TODO: check txbytes <= sizeof(i2cscfg->txbuf) here, or in hylevel API + + int i = 0; + + i2cp->id_slave_config = i2cscfg; + i2cp->id_slave_config->rw_bit = I2C_WRITE; + + + i2cp->id_i2c->CR1 |= I2C_CR1_START; // generate start condition + while (!(i2cp->id_i2c->SR1 & I2C_SR1_SB)){ + i++; // wait Address sent + } + + i2cp->id_i2c->DR = (i2cp->id_slave_config->slave_addr1 << 1) | I2C_WRITE; // write slave addres in DR + while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR)){ + i++; // wait Address sent + } + i = i2cp->id_i2c->SR2; // TODO: check is it need to read this register for I2C to proper functionality + i = i2cp->id_i2c->SR1; //i2cp->id_i2c->SR1 &= (~I2C_SR1_ADDR); // clear ADDR bit + + // now write data byte by byte in DR register + uint32_t n = 0; + for (n = 0; n < i2cp->id_slave_config->txbytes; n++){ + i2cp->id_i2c->DR = i2cscfg->txbuf[n]; + while (!(i2cp->id_i2c->SR1 & I2C_SR1_TXE)){ + i++; + } + } + + while (!(i2cp->id_i2c->SR1 & I2C_SR1_BTF)){ + i++; + } + + if (restart){ + i2cp->id_i2c->CR1 |= I2C_CR1_START; // generate restart condition + while (!(i2cp->id_i2c->SR1 & I2C_SR1_SB)){ + i++; // wait start bit + } + } + else i2cp->id_i2c->CR1 |= I2C_CR1_STOP; // generate stop condition +} + + +/** + * @brief Receives data from the I2C bus. + * @details Before receive data from I2C slave you must manually sent them some + * control bytes first (refer to you device datasheet). + * + * @param[in] i2cp pointer to the @p I2CDriver object + * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object + */ +void i2c_lld_master_receive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg) { + + chSysLock(); + + i2cp->id_slave_config = i2cscfg; + + uint16_t i = 0; + uint16_t tmp = 0; + + // send slave addres with read-bit + i2cp->id_i2c->DR = (i2cp->id_slave_config->slave_addr1 << 1) | I2C_READ; + while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR)){ + i++; // wait Address sent + } + i = i2cp->id_i2c->SR2; // TODO: check is it need to read this register for I2C to proper functionality + i = i2cp->id_i2c->SR1; //i2cp->id_i2c->SR1 &= (~I2C_SR1_ADDR); // clear ADDR bit + + // set ACK bit + i2cp->id_i2c->CR1 |= I2C_CR1_ACK; + + // collect data from slave + for (i = 0; i < i2cp->id_slave_config->rxbytes; i++){ + if ((i2cp->id_slave_config->rxbytes - i) == 1){ // TODO: is it better <= in place of == ? + // clear ACK bit for automatically send NACK + i2cp->id_i2c->CR1 &= (~I2C_CR1_ACK);} + while (!(i2cp->id_i2c->SR1 & I2C_SR1_RXNE)){ + tmp++; + } + i2cp->id_slave_config->rxbuf[i] = i2cp->id_i2c->DR; + } + // generate STOP + i2cp->id_i2c->CR1 |= I2C_CR1_STOP; + + chSysUnlock(); +} + + + +#endif // HAL_USE_I2C diff --git a/os/hal/platforms/STM32/i2c_lld_brts.h b/os/hal/platforms/STM32/i2c_lld_brts.h new file mode 100644 index 000000000..bac1dfff0 --- /dev/null +++ b/os/hal/platforms/STM32/i2c_lld_brts.h @@ -0,0 +1,267 @@ +/** + * @file STM32/i2c_lld.h + * @brief STM32 I2C subsystem low level driver header. + * @addtogroup STM32_I2C + * @{ + */ + +#ifndef _I2C_LLD_H_ +#define _I2C_LLD_H_ + +#if HAL_USE_I2C || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @brief I2C1 driver enable switch. + * @details If set to @p TRUE the support for I2C1 is included. + * @note The default is @p TRUE. + */ +#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__) +#define STM32_I2C_USE_I2C1 TRUE +#endif + +/** + * @brief I2C2 driver enable switch. + * @details If set to @p TRUE the support for I2C2 is included. + * @note The default is @p TRUE. + */ +#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__) +#define STM32_I2C_USE_I2C2 TRUE +#endif + +/** + * @brief I2C1 interrupt priority level setting. + * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C1_IRQ_PRIORITY > @p PRIORITY_PENDSV. + */ +#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define STM32_I2C_I2C1_IRQ_PRIORITY 0xA0 +#endif + +/** + * @brief I2C2 interrupt priority level setting. + * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C2_IRQ_PRIORITY > @p PRIORITY_PENDSV. + */ +#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define STM32_I2C_I2C2_IRQ_PRIORITY 0xA0 +#endif + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +/** @brief No pending conditions.*/ +#define I2C_NO_ERROR 0 +/*@brief external Stop or Start condition during an address or a data transfer*/ +#define I2C_BUS_ERROR 1 +/** @brief */ +#define I2C_ARBITRATION_LOSS 2 +/** @brief */ +#define I2C_ACK_FAIL 4 +/** @brief */ +#define I2C_OVERRUN_UNDERRUN 8 +/** @brief */ +#define I2C_PEC_ERROR 16 +/** @brief */ +#define I2C_TIMEOUT 32 +/** @brief */ +#define I2C_SMBUS_ALERT 64 + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/** + * @brief Type of a structure representing an I2C driver. + */ +typedef struct I2CDriver I2CDriver; + +/** + * @brief Type of a structure representing an I2C driver. + */ +typedef struct I2CSlaveConfig I2CSlaveConfig; + + +/** + * @brief I2C notification callback type. + * @details This function must be used to send start or stop events to I2C bus, + * and change states of I2CDriver. + * + * @param[in] i2cp pointer to the @p I2CDriver object triggering the + * callback + * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object triggering the + * callback + */ +typedef void (*i2ccallback_t)(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg); + + +/** + * @brief I2C error notification callback type. + * + * @param[in] i2cp TODO: pointer to the @p I2CDriver object triggering the + * callback + */ +typedef void (*i2cerrorcallback_t)(void); + + +/** + * @brief Driver configuration structure. + */ +typedef struct { + /** + * @brief I2C initialization data. + */ + uint16_t i2cc_cr1; + uint16_t i2cc_cr2; + uint16_t i2cc_ccr; + uint16_t i2cc_trise; + +} I2CConfig; + + +/** + * @brief TODO: + */ +typedef uint32_t i2cflags_t; + +/** + * @brief TODO: + */ +typedef uint8_t i2cblock_t; + + +/** + * @brief Structure representing an I2C slave configuration. + * @details Each slave has its own data buffers, adress, and error flags. + */ +struct I2CSlaveConfig{ + /** + * @brief Callback pointer. + * @note Transfer finished callback. Invoke when all data transferred, or + * by DMA buffer events + * @p NULL then the callback is disabled. + */ + i2ccallback_t id_callback; + /** + * @brief Callback pointer. + * @note TODO: I don't know, when this callback is inwoked + * @p NULL then the callback is disabled. + */ + i2cerrorcallback_t id_err_callback; + + i2cblock_t *rxbuf; // pointer to buffer + size_t rxdepth; // depth of buffer + size_t rxbytes; // count of bytes to sent in one sending + size_t rxbufhead; // head pointer to current data byte + + i2cblock_t *txbuf; + size_t txdepth; + size_t txbytes; + size_t txbufhead; + + uint8_t slave_addr1; // 7-bit address of the slave + uint8_t slave_addr2; // used in 10-bit address mode + + uint16_t error_flags; + + uint8_t rw_bit; // this flag contain R/W bit + + bool_t restart; // send restart or stop event after complete data tx/rx + +}; + + + +/** + * @brief Structure representing an I2C driver. + */ +struct I2CDriver{ + /** + * @brief Driver state. + */ + i2cstate_t id_state; +#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) +#if CH_USE_MUTEXES || defined(__DOXYGEN__) + /** + * @brief Mutex protecting the bus. + */ + Mutex id_mutex; +#elif CH_USE_SEMAPHORES + Semaphore id_semaphore; +#endif +#endif /* I2C_USE_MUTUAL_EXCLUSION */ + /** + * @brief Current configuration data. + */ + I2CConfig *id_config; + /** + * @brief Current slave configuration data. + */ + I2CSlaveConfig *id_slave_config; + + /* End of the mandatory fields.*/ + /** + * @brief Thread waiting for I/O completion. + */ + Thread *id_thread; + /** + * @brief Pointer to the I2Cx registers block. + */ + I2C_TypeDef *id_i2c; + +} ; + + + + + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +/** @cond never*/ +#if STM32_I2C_USE_I2C1 +extern I2CDriver I2CD1; +#endif + +#if STM32_I2C_USE_I2C2 +extern I2CDriver I2CD2; +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +void i2c_lld_init(void); +void i2c_lld_start(I2CDriver *i2cp); +void i2c_lld_stop(I2CDriver *i2cp); + +void i2c_lld_master_start(I2CDriver *i2cp); +void i2c_lld_master_stop(I2CDriver *i2cp); + +void i2c_lld_master_transmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg, bool_t restart); +void i2c_lld_master_transmitI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg); +bool_t i2c_lld_txbyte(I2CDriver *i2cp); // helper function + +void i2c_lld_master_receive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg); +void i2c_lld_master_receiveI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg); +bool_t i2c_lld_rxbyte(I2CDriver *i2cp); + +#ifdef __cplusplus +} +#endif +/** @endcond*/ + +#endif // CH_HAL_USE_I2C + +#endif // _I2C_LLD_H_ diff --git a/os/hal/platforms/STM32/platform.mk b/os/hal/platforms/STM32/platform.mk index ceadcea62..35717687f 100644 --- a/os/hal/platforms/STM32/platform.mk +++ b/os/hal/platforms/STM32/platform.mk @@ -7,8 +7,8 @@ PLATFORMSRC = ${CHIBIOS}/os/hal/platforms/STM32/hal_lld.c \ ${CHIBIOS}/os/hal/platforms/STM32/serial_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/spi_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/uart_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/usb_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/stm32_dma.c
+ ${CHIBIOS}/os/hal/platforms/STM32/stm32_dma.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/i2c_lld.c
# Required include directories
PLATFORMINC = ${CHIBIOS}/os/hal/platforms/STM32
diff --git a/os/hal/src/i2c.c b/os/hal/src/i2c.c index 2b5971b6f..5a0471e0f 100644 --- a/os/hal/src/i2c.c +++ b/os/hal/src/i2c.c @@ -54,7 +54,6 @@ * @init
*/
void i2cInit(void) {
-
i2c_lld_init();
}
@@ -67,8 +66,9 @@ void i2cInit(void) { */
void i2cObjectInit(I2CDriver *i2cp) {
- i2cp->i2c_state = I2C_STOP;
- i2cp->i2c_config = NULL;
+ i2cp->id_state = I2C_STOP;
+ i2cp->id_config = NULL;
+ i2cp->id_slave_config = NULL;
#if defined(I2C_DRIVER_EXT_INIT_HOOK)
I2C_DRIVER_EXT_INIT_HOOK(i2cp);
#endif
@@ -82,17 +82,17 @@ void i2cObjectInit(I2CDriver *i2cp) { *
* @api
*/
-void i2cStart(I2CDriver *i2cp, const I2CConfig *config) {
+void i2cStart(I2CDriver *i2cp, I2CConfig *config) {
chDbgCheck((i2cp != NULL) && (config != NULL), "i2cStart");
chSysLock();
- chDbgAssert((i2cp->i2c_state == I2C_STOP) || (i2cp->i2c_state == I2C_READY),
+ chDbgAssert((i2cp->id_state == I2C_STOP) || (i2cp->id_state == I2C_READY),
"i2cStart(), #1",
"invalid state");
- i2cp->i2c_config = config;
+ i2cp->id_config = config;
i2c_lld_start(i2cp);
- i2cp->i2c_state = I2C_READY;
+ i2cp->id_state = I2C_READY;
chSysUnlock();
}
@@ -108,118 +108,61 @@ void i2cStop(I2CDriver *i2cp) { chDbgCheck(i2cp != NULL, "i2cStop");
chSysLock();
- chDbgAssert((i2cp->i2c_state == I2C_STOP) || (i2cp->i2c_state == I2C_READY),
+ chDbgAssert((i2cp->id_state == I2C_STOP) || (i2cp->id_state == I2C_READY),
"i2cStop(), #1",
"invalid state");
i2c_lld_stop(i2cp);
- i2cp->i2c_state = I2C_STOP;
+ i2cp->id_state = I2C_STOP;
chSysUnlock();
}
/**
- * @brief Initiates a master bus transaction.
- * @details This function sends a start bit followed by an one or two bytes
- * header.
- *
- * @param[in] i2cp pointer to the @p I2CDriver object
- * @param[in] header transaction header
- * @param[in] callback operation complete callback
- *
- * @iclass
- */
-void i2cMasterStartI(I2CDriver *i2cp,
- uint16_t header,
- i2ccallback_t callback) {
-
- chDbgCheck((i2cp != NULL) && (callback != NULL), "i2cMasterStartI");
- chDbgAssert(i2cp->i2c_state == I2C_READY,
- "i2cMasterStartI(), #1", "invalid state");
-
- i2cp->id_callback = callback;
- i2c_lld_master_start(i2cp, header);
-}
-
-/**
- * @brief Terminates a master bus transaction.
+ * @brief Sends data ever the I2C bus.
*
- * @param[in] i2cp pointer to the @p I2CDriver object
- * @param[in] callback operation complete callback
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] slave_addr1 7-bit address of the slave
+ * @param[in] slave_addr1 used in 10-bit address mode
+ * @param[in] n number of words to send
+ * @param[in] txbuf the pointer to the transmit buffer
*
- * @iclass
*/
-void i2cMasterStopI(I2CDriver *i2cp, i2ccallback_t callback) {
+void i2cMasterTransmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg) {
- chDbgCheck((i2cp != NULL) && (callback != NULL), "i2cMasterStopI");
- chDbgAssert(i2cp->i2c_state == I2C_MREADY,
- "i2cMasterStopI(), #1", "invalid state");
+ chDbgCheck((i2cp != NULL) && (i2cscfg != NULL),
+ "i2cMasterTransmit");
+ chDbgAssert(i2cp->id_state == I2C_READY,
+ "i2cMasterTransmit(), #1",
+ "not active");
- i2cp->id_callback = callback;
- i2c_lld_master_stop(i2cp);
+ i2c_lld_master_transmitI(i2cp, i2cscfg);
}
/**
- * @brief Sends a restart bit.
- * @details Restart bits are required by some types of I2C transactions.
+ * @brief Receives data from the I2C bus.
*
* @param[in] i2cp pointer to the @p I2CDriver object
- * @param[in] callback operation complete callback
+ * @param[in] slave_addr1 7-bit address of the slave
+ * @param[in] slave_addr1 used in 10-bit address mode
+ * @param[in] n number of words to receive
+ * @param[out] rxbuf the pointer to the receive buffer
*
- * @iclass
*/
-void i2cMasterRestartI(I2CDriver *i2cp, i2ccallback_t callback) {
+void i2cMasterReceive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg) {
- chDbgCheck((i2cp != NULL) && (callback != NULL), "i2cMasterRestartI");
- chDbgAssert(i2cp->i2c_state == I2C_MREADY,
- "i2cMasterRestartI(), #1", "invalid state");
+ chDbgCheck((i2cp != NULL) && (i2cscfg != NULL),
+ "i2cMasterReceive");
+ chDbgAssert(i2cp->id_state == I2C_READY,
+ "i2cMasterReceive(), #1",
+ "not active");
- i2cp->id_callback = callback;
- i2c_lld_master_restart(i2cp);
+ i2c_lld_master_receiveI(i2cp, i2cscfg);
}
-/**
- * @brief Master transmission.
- *
- * @param[in] i2cp pointer to the @p I2CDriver object
- * @param[in] n number of bytes to be transmitted
- * @param[in] txbuf transmit data buffer pointer
- * @param[in] callback operation complete callback
- *
- * @iclass
- */
-void i2cMasterTransmitI(I2CDriver *i2cp, size_t n, const uint8_t *txbuf,
- i2ccallback_t callback) {
-
- chDbgCheck((i2cp != NULL) && (n > 0) &&
- (txbuf != NULL) && (callback != NULL), "i2cMasterTransmitI");
- chDbgAssert(i2cp->i2c_state == I2C_MREADY,
- "i2cMasterTransmitI(), #1", "invalid state");
- i2cp->id_callback = callback;
- i2c_lld_master_transmit(i2cp, n, txbuf);
-}
-/**
- * @brief Master receive.
- *
- * @param[in] i2cp pointer to the @p I2CDriver object
- * @param[in] n number of bytes to be transmitted
- * @param[in] rxbuf receive data buffer pointer
- * @param[in] callback operation complete callback
- *
- * @iclass
- */
-void i2cMasterReceiveI(I2CDriver *i2cp, size_t n, uint8_t *rxbuf,
- i2ccallback_t callback) {
- chDbgCheck((i2cp != NULL) && (n > 0) &&
- (rxbuf != NULL) && (callback != NULL), "i2cMasterReceiveI");
- chDbgAssert(i2cp->i2c_state == I2C_MREADY,
- "i2cMasterReceiveI(), #1", "invalid state");
- i2cp->id_callback = callback;
- i2c_lld_master_receive(i2cp, n, rxbuf);
-}
#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
/**
diff --git a/os/hal/src/i2c_albi.c b/os/hal/src/i2c_albi.c new file mode 100644 index 000000000..64bed78eb --- /dev/null +++ b/os/hal/src/i2c_albi.c @@ -0,0 +1,268 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/**
+ * @brief I2C Driver initialization.
+ */
+void i2cInit(void) {
+
+ i2c_lld_init();
+}
+
+/**
+ * @brief Initializes the standard part of a @p I2CDriver structure.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2cObjectInit(I2CDriver *i2cp) {
+ chEvtInit(&i2cp->sevent);
+ i2cp->errors = I2CD_NO_ERROR;
+ i2cp->state = I2C_STOP;
+// i2cp->i2cd_config = NULL;
+#if I2C_USE_WAIT
+ i2cp->thread = NULL;
+#endif /* I2C_USE_WAIT */
+#if I2C_USE_MUTUAL_EXCLUSION
+#if CH_USE_MUTEXES
+ chMtxInit(&i2cp->mutex);
+#elif CH_USE_SEMAPHORES
+ chSemInit(&i2cp->semaphore, 1);
+#endif
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+#if defined(I2C_DRIVER_EXT_INIT_HOOK)
+ I2C_DRIVER_EXT_INIT_HOOK(i2cp);
+#endif
+}
+
+/**
+ * @brief Configures and activates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] config pointer to the @p I2CConfig object
+ */
+void i2cStart(I2CDriver *i2cp, const I2CConfig *config) {
+
+ chDbgCheck((i2cp != NULL) && (config != NULL), "i2cStart");
+
+ chSysLock();
+ chDbgAssert((i2cp->state == I2C_STOP)||(i2cp->state == I2C_READY),
+ "i2cStart(), #1", "invalid state");
+
+ i2cp->nbit_address = config->nBitAddress;
+ i2c_lld_start(i2cp);
+ i2c_lld_set_clock(i2cp, config->ClockSpeed, config->FastModeDutyCycle);
+ i2c_lld_set_opmode(i2cp, config->opMode);
+ i2c_lld_set_own_address(i2cp, config->OwnAddress1, config->nBitAddress);
+ i2cp->state = I2C_READY;
+ chSysUnlock();
+}
+
+/**
+ * @brief Deactivates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2cStop(I2CDriver *i2cp) {
+
+ chDbgCheck(i2cp != NULL, "i2cStop");
+
+ chSysLock();
+ chDbgAssert((i2cp->state == I2C_STOP) || (i2cp->state == I2C_READY),
+ "i2cStop(), #1", "invalid state");
+ i2c_lld_stop(i2cp);
+ i2cp->state = I2C_STOP;
+ chSysUnlock();
+}
+
+/**
+ * @brief Sends data ever the I2C bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] slave_addr 7-bit or 10-bit address of the slave
+ * @param[in] n number of words to send
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ */
+void i2cMasterTransmit(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *txbuf) {
+
+ chDbgCheck((i2cp != NULL) && (n > 0) && (txbuf != NULL),
+ "i2cMasterTransmit");
+
+#if I2C_USE_WAIT
+ i2c_lld_wait_bus_free(i2cp);
+ if(i2c_lld_bus_is_busy(i2cp)) {
+#ifdef PRINTTRACE
+ print("I2C Bus busy!\n");
+#endif
+ return;
+ };
+#endif
+
+ chSysLock();
+ chDbgAssert(i2cp->state == I2C_READY,
+ "i2cMasterTransmit(), #1", "not ready");
+
+ i2cp->state = I2C_ACTIVE;
+ i2c_lld_master_transmit(i2cp, slave_addr, n, txbuf);
+ _i2c_wait_s(i2cp);
+#if !I2C_USE_WAIT
+ i2c_lld_wait_bus_free(i2cp);
+#endif
+ if (i2cp->state == I2C_COMPLETE)
+ i2cp->state = I2C_READY;
+ chSysUnlock();
+}
+
+/**
+ * @brief Receives data from the I2C bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] slave_addr 7-bit or 10-bit address of the slave
+ * @param[in] n number of bytes to receive
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ */
+void i2cMasterReceive(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *rxbuf) {
+
+ chDbgCheck((i2cp != NULL) && (n > 0) && (rxbuf != NULL),
+ "i2cMasterReceive");
+
+#if I2C_USE_WAIT
+ i2c_lld_wait_bus_free(i2cp);
+ if(i2c_lld_bus_is_busy(i2cp)) {
+#ifdef PRINTTRACE
+ print("I2C Bus busy!\n");
+#endif
+ return;
+ };
+#endif
+
+ chSysLock();
+ chDbgAssert(i2cp->state == I2C_READY,
+ "i2cMasterReceive(), #1", "not ready");
+
+ i2cp->state = I2C_ACTIVE;
+ i2c_lld_master_receive(i2cp, slave_addr, n, rxbuf);
+ _i2c_wait_s(i2cp);
+#if !I2C_USE_WAIT
+ i2c_lld_wait_bus_free(i2cp);
+#endif
+ if (i2cp->state == I2C_COMPLETE)
+ i2cp->state = I2C_READY;
+ chSysUnlock();
+}
+
+uint16_t i2cSMBusAlertResponse(I2CDriver *i2cp) {
+ uint16_t slv_addr;
+
+ i2cMasterReceive(i2cp, 0x0C, 2, &slv_addr);
+ return slv_addr;
+}
+
+
+/**
+ * @brief Handles communication events/errors.
+ * @details Must be called from the I/O interrupt service routine in order to
+ * notify I/O conditions as errors, signals change etc.
+ *
+ * @param[in] i2cp pointer to a @p I2CDriver structure
+ * @param[in] mask condition flags to be added to the mask
+ *
+ * @iclass
+ */
+void i2cAddFlagsI(I2CDriver *i2cp, i2cflags_t mask) {
+
+ chDbgCheck(i2cp != NULL, "i2cAddFlagsI");
+
+ i2cp->errors |= mask;
+ chEvtBroadcastI(&i2cp->sevent);
+}
+
+/**
+ * @brief Returns and clears the errors mask associated to the driver.
+ *
+ * @param[in] i2cp pointer to a @p I2CDriver structure
+ * @return The condition flags modified since last time this
+ * function was invoked.
+ *
+ * @api
+ */
+i2cflags_t i2cGetAndClearFlags(I2CDriver *i2cp) {
+ i2cflags_t mask;
+
+ chDbgCheck(i2cp != NULL, "i2cGetAndClearFlags");
+
+ chSysLock();
+ mask = i2cp->errors;
+ i2cp->errors = I2CD_NO_ERROR;
+ chSysUnlock();
+ return mask;
+}
+
+
+
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+/**
+ * @brief Gains exclusive access to the I2C bus.
+ * @details This function tries to gain ownership to the I2C bus, if the bus
+ * is already being used then the invoking thread is queued.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @note This function is only available when the @p I2C_USE_MUTUAL_EXCLUSION
+ * option is set to @p TRUE.
+ */
+void i2cAcquireBus(I2CDriver *i2cp) {
+
+ chDbgCheck(i2cp != NULL, "i2cAcquireBus");
+
+#if CH_USE_MUTEXES
+ chMtxLock(&i2cp->mutex);
+#elif CH_USE_SEMAPHORES
+ chSemWait(&i2cp->semaphore);
+#endif
+}
+
+/**
+ * @brief Releases exclusive access to the I2C bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @note This function is only available when the @p I2C_USE_MUTUAL_EXCLUSION
+ * option is set to @p TRUE.
+ */
+void i2cReleaseBus(I2CDriver *i2cp) {
+
+ chDbgCheck(i2cp != NULL, "i2cReleaseBus");
+
+#if CH_USE_MUTEXES
+ (void)i2cp;
+ chMtxUnlock();
+#elif CH_USE_SEMAPHORES
+ chSemSignal(&i2cp->semaphore);
+#endif
+}
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+
+#endif /* CH_HAL_USE_I2C */
diff --git a/os/hal/src/i2c_brts.c b/os/hal/src/i2c_brts.c new file mode 100644 index 000000000..5a0471e0f --- /dev/null +++ b/os/hal/src/i2c_brts.c @@ -0,0 +1,215 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file i2c.c
+ * @brief I2C Driver code.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief I2C Driver initialization.
+ * @note This function is implicitly invoked by @p halInit(), there is
+ * no need to explicitly initialize the driver.
+ *
+ * @init
+ */
+void i2cInit(void) {
+ i2c_lld_init();
+}
+
+/**
+ * @brief Initializes the standard part of a @p I2CDriver structure.
+ *
+ * @param[out] i2cp pointer to the @p I2CDriver object
+ *
+ * @init
+ */
+void i2cObjectInit(I2CDriver *i2cp) {
+
+ i2cp->id_state = I2C_STOP;
+ i2cp->id_config = NULL;
+ i2cp->id_slave_config = NULL;
+#if defined(I2C_DRIVER_EXT_INIT_HOOK)
+ I2C_DRIVER_EXT_INIT_HOOK(i2cp);
+#endif
+}
+
+/**
+ * @brief Configures and activates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] config pointer to the @p I2CConfig object
+ *
+ * @api
+ */
+void i2cStart(I2CDriver *i2cp, I2CConfig *config) {
+
+ chDbgCheck((i2cp != NULL) && (config != NULL), "i2cStart");
+
+ chSysLock();
+ chDbgAssert((i2cp->id_state == I2C_STOP) || (i2cp->id_state == I2C_READY),
+ "i2cStart(), #1",
+ "invalid state");
+ i2cp->id_config = config;
+ i2c_lld_start(i2cp);
+ i2cp->id_state = I2C_READY;
+ chSysUnlock();
+}
+
+/**
+ * @brief Deactivates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @api
+ */
+void i2cStop(I2CDriver *i2cp) {
+
+ chDbgCheck(i2cp != NULL, "i2cStop");
+
+ chSysLock();
+ chDbgAssert((i2cp->id_state == I2C_STOP) || (i2cp->id_state == I2C_READY),
+ "i2cStop(), #1",
+ "invalid state");
+ i2c_lld_stop(i2cp);
+ i2cp->id_state = I2C_STOP;
+ chSysUnlock();
+}
+
+/**
+ * @brief Sends data ever the I2C bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] slave_addr1 7-bit address of the slave
+ * @param[in] slave_addr1 used in 10-bit address mode
+ * @param[in] n number of words to send
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ */
+void i2cMasterTransmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg) {
+
+ chDbgCheck((i2cp != NULL) && (i2cscfg != NULL),
+ "i2cMasterTransmit");
+ chDbgAssert(i2cp->id_state == I2C_READY,
+ "i2cMasterTransmit(), #1",
+ "not active");
+
+ i2c_lld_master_transmitI(i2cp, i2cscfg);
+}
+
+
+/**
+ * @brief Receives data from the I2C bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] slave_addr1 7-bit address of the slave
+ * @param[in] slave_addr1 used in 10-bit address mode
+ * @param[in] n number of words to receive
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ */
+void i2cMasterReceive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg) {
+
+ chDbgCheck((i2cp != NULL) && (i2cscfg != NULL),
+ "i2cMasterReceive");
+ chDbgAssert(i2cp->id_state == I2C_READY,
+ "i2cMasterReceive(), #1",
+ "not active");
+
+ i2c_lld_master_receiveI(i2cp, i2cscfg);
+}
+
+
+
+
+
+
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+/**
+ * @brief Gains exclusive access to the I2C bus.
+ * @details This function tries to gain ownership to the I2C bus, if the bus
+ * is already being used then the invoking thread is queued.
+ * @pre In order to use this function the option @p I2C_USE_MUTUAL_EXCLUSION
+ * must be enabled.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @api
+ *
+ */
+void i2cAcquireBus(I2CDriver *i2cp) {
+
+ chDbgCheck(i2cp != NULL, "i2cAcquireBus");
+
+#if CH_USE_MUTEXES
+ chMtxLock(&i2cp->id_mutex);
+#elif CH_USE_SEMAPHORES
+ chSemWait(&i2cp->id_semaphore);
+#endif
+}
+
+/**
+ * @brief Releases exclusive access to the I2C bus.
+ * @pre In order to use this function the option @p I2C_USE_MUTUAL_EXCLUSION
+ * must be enabled.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @api
+ */
+void i2cReleaseBus(I2CDriver *i2cp) {
+
+ chDbgCheck(i2cp != NULL, "i2cReleaseBus");
+
+#if CH_USE_MUTEXES
+ (void)i2cp;
+ chMtxUnlock();
+#elif CH_USE_SEMAPHORES
+ chSemSignal(&i2cp->id_semaphore);
+#endif
+}
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+
+#endif /* HAL_USE_I2C */
+
+/** @} */
|