diff options
Diffstat (limited to 'boards/EA_LPCXPRESSO_LPC812/board.h')
| -rw-r--r-- | boards/EA_LPCXPRESSO_LPC812/board.h | 125 |
1 files changed, 0 insertions, 125 deletions
diff --git a/boards/EA_LPCXPRESSO_LPC812/board.h b/boards/EA_LPCXPRESSO_LPC812/board.h deleted file mode 100644 index 0a1618292..000000000 --- a/boards/EA_LPCXPRESSO_LPC812/board.h +++ /dev/null @@ -1,125 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for Embedded Artists LPCXpresso LPC812 board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_EA_LPC812
-#define BOARD_NAME "Embedded Artists LPCXpresso LPC812"
-
-/*
- * Board frequencies.
- */
-#define SYSOSCCLK 12000000
-
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the LPC8xx Reference Manual for details.
- */
-/* Pull-up/down */
-#define PIN_MODE_NOPULL (0<<3)
-#define PIN_MODE_PULLDOWN (1<<3)
-#define PIN_MODE_PULLUP (2<<3)
-#define PIN_MODE_REPEATER (3<<3)
-/* Hysteresis */
-#define PIN_HYS_EN (1<<5)
-/* Invert Input */
-#define PIN_INV_INPUT (1<<6)
-/* Reserved bits */
-#define PIN_RSVD (1<<7)
-/* I2C Mode */
-#define PIN_I2CMODE_STD (0<<8)
-#define PIN_I2CMODE_STDIO (1<<8)
-#define PIN_I2CMODE_FAST (2<<8)
-/* Open Drain */
-#define PIN_OPEN_DRAIN (1<<10)
-/* Input Filter Sample Clocks */
-#define PIN_SMODE_FILTER(n) ((n)<<11)
-/* Input Filter clock divider */
-#define PIN_CLKDIV_FILTER(n) ((n)<<13)
-
-/*
- * Pin definitions.
- */
-#define LED_RED 7
-#define LED_BLUE 16
-#define LED_GREEN 17
-
-
-/*
- * GPIO 0 initial setup.
- */
-/*#define VAL_PIO0_0 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_1 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_2 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_3 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_4 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_5 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_6 PIN_MODE_PULLUP*/
-#define VAL_PIO0_7 PIN_MODE_NOPULL
-/*#define VAL_PIO0_8 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_9 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_10 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_11 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_12 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_13 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_14 PIN_MODE_PULLUP*/
-/*#define VAL_PIO0_15 PIN_MODE_PULLUP*/
-#define VAL_PIO0_16 PIN_MODE_NOPULL
-#define VAL_PIO0_17 PIN_MODE_NOPULL
-
- /* UART0: TXD = P0.4, RXD = P0.0)*/
-#define VAL_PINASSIGN0 ((0xFFFF0000) | (0<<8) | (4))
-/*#define VAL_PINASSIGN1 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN2 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN3 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN4 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN5 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN6 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN7 0xFFFFFFFF*/
-/*#define VAL_PINASSIGN8 0xFFFFFFFF*/
-
-
-#define VAL_GPIO0DIR (PAL_PORT_BIT(LED_RED) | \
- PAL_PORT_BIT(LED_BLUE) | \
- PAL_PORT_BIT(LED_GREEN))
-
-#define VAL_GPIO0DATA (PAL_PORT_BIT(LED_RED) | \
- PAL_PORT_BIT(LED_BLUE) | \
- PAL_PORT_BIT(LED_GREEN))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-
-#endif /* _BOARD_H_ */
|