1 files changed, 0 insertions, 101 deletions
diff --git a/boards/OLIMEX_SAM7_EX256/board.h b/boards/OLIMEX_SAM7_EX256/board.h
deleted file mode 100644
index efe5ead0c..000000000
--- a/boards/OLIMEX_SAM7_EX256/board.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex SAM7-EX256 development board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_SAM7_EX256
-#define BOARD_NAME "Olimex SAM7-EX256"
-
-/*
- * Select your platform by modifying the following line.
- */
-#if !defined(SAM7_PLATFORM)
-#define SAM7_PLATFORM   SAM7X256
-#endif
-
-#include "at91sam7.h"
-
-#define CLK             18432000
-#define MCK             48054857
-
-/*
- * Initial I/O setup.
- */
-#define VAL_PIOA_ODSR           0x00000000      /* Output data. */
-#define VAL_PIOA_OSR            0x00000000      /* Direction. */
-#define VAL_PIOA_PUSR           0xFFFFFFFF      /* Pull-up. */
-
-#define VAL_PIOB_ODSR           0x00000000      /* Output data. */
-#define VAL_PIOB_OSR            0x00000000      /* Direction. */
-#define VAL_PIOB_PUSR           0xFFFFFFFF      /* Pull-up. */
-
-/*
- * I/O definitions.
- */
-#define PIOA_LCD_RESET          2
-#define PIOA_LCD_RESET_MASK     (1 << PIOA_LCD_RESET)
-#define PIOA_B1                 7
-#define PIOA_B1_MASK            (1 << PIOA_B1)
-#define PIOA_B2                 8
-#define PIOA_B2_MASK            (1 << PIOA_B2)
-#define PIOA_B3                 9
-#define PIOA_B3_MASK            (1 << PIOA_B3)
-#define PIOA_B4                 14
-#define PIOA_B4_MASK            (1 << PIOA_B4)
-#define PIOA_B5                 15
-#define PIOA_B5_MASK            (1 << PIOA_B5)
-#define PIOA_USB_PUP            25
-#define PIOA_USB_PUP_MASK       (1 << PIOA_USB_PUP)
-#define PIOA_USB_PR             26
-#define PIOA_USB_PR_MASK        (1 << PIOA_USB_PR)
-#define PIOA_CS_MMC             13
-
-#define PIOB_PHY_PD             18
-#define PIOB_PHY_PD_MASK        (1 << PIOB_PHY_PD)
-#define PIOB_AUDIO_OUT          19
-#define PIOB_AUDIO_OUT_MASK     (1 << PIOB_AUDIO_OUT)
-#define PIOB_LCD_BL             20
-#define PIOB_LCD_BL_MASK        (1 << PIOB_LCD_BL)
-#define PIOB_MMC_WP             22
-#define PIOB_MMC_WP_MASK        (1 << PIOB_MMC_WP)
-#define PIOB_MMC_CP             23
-#define PIOB_MMC_CP_MASK        (1 << PIOB_MMC_CP)
-#define PIOB_SW1                24
-#define PIOB_SW1_MASK           (1 << PIOB_SW1)
-#define PIOB_SW2                25
-#define PIOB_SW2_MASK           (1 << PIOB_SW2)
-#define PIOB_PHY_IRQ            26
-#define PIOB_PHY_IRQ_MASK       (1 << PIOB_PHY_IRQ)
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */