diff options
Diffstat (limited to 'boards/OLIMEX_STM32_LCD/board.h')
| -rw-r--r-- | boards/OLIMEX_STM32_LCD/board.h | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/boards/OLIMEX_STM32_LCD/board.h b/boards/OLIMEX_STM32_LCD/board.h deleted file mode 100644 index 0d510abac..000000000 --- a/boards/OLIMEX_STM32_LCD/board.h +++ /dev/null @@ -1,196 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex STM32-LCD proto board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_STM32_LCD
-#define BOARD_NAME "Olimex STM32-LCD"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F10X_HD
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_SPI1NSS 4
-
-#define GPIOB_SPI2NSS 12
-
-#define GPIOA_USB_P 0
-#define GPIOD_USB_DISC 2
-
-#define GPIOE_TFT_RST 2
-#define GPIOD_TFT_LIGHT 13
-#define GPIOC_TFT_YD 0
-#define GPIOC_TFT_YU 1
-#define GPIOC_TFT_XL 2
-#define GPIOC_TFT_XR 3
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- * 0 - Analog input.
- * 1 - Push Pull output 10MHz.
- * 2 - Push Pull output 2MHz.
- * 3 - Push Pull output 50MHz.
- * 4 - Digital input.
- * 5 - Open Drain output 10MHz.
- * 6 - Open Drain output 2MHz.
- * 7 - Open Drain output 50MHz.
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
- * 9 - Alternate Push Pull output 10MHz.
- * A - Alternate Push Pull output 2MHz.
- * B - Alternate Push Pull output 50MHz.
- * C - Reserved.
- * D - Alternate Open Drain output 10MHz.
- * E - Alternate Open Drain output 2MHz.
- * F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA0 - Normal input (USB P).
- * PA2 - Alternate output (USART2 TX).
- * PA3 - Normal input (USART2 RX).
- * PA11 - Normal input (USB DM).
- * PA12 - Normal input (USB DP).
- */
-#define VAL_GPIOACRL 0x88884B84 /* PA7...PA0 */
-#define VAL_GPIOACRH 0x88844888 /* PA15...PA8 */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
-#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC0 - Analog Input (TP_YD).
- * PC1 - Analog Input (TP_YU).
- * PC2 - Analog Input (TP_XL).
- * PC3 - Analog Input (TP_XR).
- * PC8 - Alternate PP 50M (SD_D0).
- * PC9 - Alternate PP 50M (SD_D1).
- * PC10 - Alternate PP 50M (SD_D2).
- * PC11 - Alternate PP 50M (SD_D3).
- * PC12 - Alternate PP 50M (SD_CLK).
- * PC14 - Normal input (XTAL).
- * PC15 - Normal input (XTAL).
- */
-#define VAL_GPIOCCRL 0x88880000 /* PC7...PC0 */
-#define VAL_GPIOCCRH 0x448BBBBB /* PC15...PC8 */
-#define VAL_GPIOCODR 0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD2 - Alternate PP 50M (SD_CMD)
- * PD0 - Alternate PP 50M (FSMC_D2)
- * PD1 - Alternate PP 50M (FSMC_D3)
- * PD4 - Alternate PP 50M (TFT_RD)
- * PD5 - Alternate PP 50M (TFT_WR)
- * PD7 - Alternate PP 50M (TFT_CS)
- * PD8 - Alternate PP 50M (FSMC_D13)
- * PD9 - Alternate PP 50M (FSMC_D14)
- * PD10 - Alternate PP 50M (FSMC_D15)
- * PD14 - Alternate PP 50M (FSMC_D0)
- * PD15 - Alternate PP 50M (FSMC_D1)
- */
-#define VAL_GPIODCRL 0xBBBB8BBB /* PD7...PD0 */
-#define VAL_GPIODCRH 0xBB388BBB /* PD15...PD8 */
-#define VAL_GPIODODR 0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- * PE2 - Digital Output (TFT_RST)
- * PE3 - Alternate PP 50M (TFT_RS)
- * PE7 - Alternate PP 50M (FSMC_D4)
- * PE8 - Alternate PP 50M (FSMC_D5)
- * PE9 - Alternate PP 50M (FSMC_D6)
- * PE10 - Alternate PP 50M (FSMC_D7)
- * PE11 - Alternate PP 50M (FSMC_D8)
- * PE12 - Alternate PP 50M (FSMC_D9)
- * PE13 - Alternate PP 50M (FSMC_D10)
- * PE14 - Alternate PP 50M (FSMC_D11)
- * PE15 - Alternate PP 50M (FSMC_D12)
- */
-#define VAL_GPIOECRL 0xB888B388 /* PE7...PE0 */
-#define VAL_GPIOECRH 0xBBBBBBBB /* PE15...PE8 */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-/*
- * Port F setup.
- * Everything input with pull-up expect:
- */
-#define VAL_GPIOFCRL 0x88888888 /* PF7...PF0 */
-#define VAL_GPIOFCRH 0x88888888 /* PF15...PF8 */
-#define VAL_GPIOFODR 0xFFFFFFFF
-
-/*
- * Port G setup.
- * Everything input with pull-up expect:
- */
-#define VAL_GPIOGCRL 0x88888888 /* PG7...PG0 */
-#define VAL_GPIOGCRH 0x88888888 /* PG15...PG8 */
-#define VAL_GPIOGODR 0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOD, GPIOD_USB_DISC)
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOD, GPIOD_USB_DISC)
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
|