diff options
Diffstat (limited to 'boards/OLIMEX_STM32_P103/board.h')
| -rw-r--r-- | boards/OLIMEX_STM32_P103/board.h | 156 |
1 files changed, 0 insertions, 156 deletions
diff --git a/boards/OLIMEX_STM32_P103/board.h b/boards/OLIMEX_STM32_P103/board.h deleted file mode 100644 index 58f020bcc..000000000 --- a/boards/OLIMEX_STM32_P103/board.h +++ /dev/null @@ -1,156 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the Olimex STM32-P103 proto board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_OLIMEX_STM32_P103
-#define BOARD_NAME "Olimex STM32-P103"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F10X_MD
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON 0
-#define GPIOA_SPI1NSS 4
-
-#define GPIOB_SPI2NSS 12
-
-#define GPIOC_USB_P 4
-#define GPIOC_MMCWP 6
-#define GPIOC_MMCCP 7
-#define GPIOC_CAN_CNTL 10
-#define GPIOC_USB_DISC 11
-#define GPIOC_LED 12
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- * 0 - Analog input.
- * 1 - Push Pull output 10MHz.
- * 2 - Push Pull output 2MHz.
- * 3 - Push Pull output 50MHz.
- * 4 - Digital input.
- * 5 - Open Drain output 10MHz.
- * 6 - Open Drain output 2MHz.
- * 7 - Open Drain output 50MHz.
- * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
- * 9 - Alternate Push Pull output 10MHz.
- * A - Alternate Push Pull output 2MHz.
- * B - Alternate Push Pull output 50MHz.
- * C - Reserved.
- * D - Alternate Open Drain output 10MHz.
- * E - Alternate Open Drain output 2MHz.
- * F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA0 - Normal input (BUTTON).
- * PA2 - Alternate output (USART2 TX).
- * PA3 - Normal input (USART2 RX).
- * PA11 - Normal input (USB DM).
- * PA12 - Normal input (USB DP).
- */
-#define VAL_GPIOACRL 0x88884B84 /* PA7...PA0 */
-#define VAL_GPIOACRH 0x88844888 /* PA15...PA8 */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- * PB13 - Alternate output (MMC SPI2 SCK).
- * PB14 - Normal input (MMC SPI2 MISO).
- * PB15 - Alternate output (MMC SPI2 MOSI).
- */
-#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
-#define VAL_GPIOBCRH 0xB4B88888 /* PB15...PB8 */
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC4 - Normal input because there is an external resistor.
- * PC6 - Normal input because there is an external resistor.
- * PC7 - Normal input because there is an external resistor.
- * PC10 - Push Pull output (CAN CNTRL).
- * PC11 - Push Pull output (USB DISC).
- * PC12 - Push Pull output (LED).
- */
-#define VAL_GPIOCCRL 0x44848888 /* PC7...PC0 */
-#define VAL_GPIOCCRH 0x88833388 /* PC15...PC8 */
-#define VAL_GPIOCODR 0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0 - Normal input (XTAL).
- * PD1 - Normal input (XTAL).
- */
-#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
-#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
-#define VAL_GPIODODR 0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
-#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_DISC)
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_DISC)
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
|