aboutsummaryrefslogtreecommitdiffstats
path: root/boards/ST_STM3210E_EVAL/board.h
diff options
context:
space:
mode:
Diffstat (limited to 'boards/ST_STM3210E_EVAL/board.h')
-rw-r--r--boards/ST_STM3210E_EVAL/board.h251
1 files changed, 0 insertions, 251 deletions
diff --git a/boards/ST_STM3210E_EVAL/board.h b/boards/ST_STM3210E_EVAL/board.h
deleted file mode 100644
index 739b3e089..000000000
--- a/boards/ST_STM3210E_EVAL/board.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the STMicroelectronics STM3210E-EVAL evaluation board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM3210E_EVAL
-#define BOARD_NAME "ST STM3210E-EVAL"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- * Note: Older board revisions should define STM32F10X_HD instead, please
- * verify the STM32 model mounted on your board. The change also
- * affects your linker script.
- */
-#define STM32F10X_XL
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_WAKEUP_BUTTON 0
-
-#define GPIOB_SC_3V_5V 0
-#define GPIOB_SPI1_CS 2
-#define GPIOB_TEMP_INT 5
-#define GPIOB_USB_DISC 14
-
-#define GPIOC_SC_CMDVCC 6
-#define GPIOC_SC_OFF 7
-#define GPIOC_TAMPER_BUTTON 13
-
-#define GPIOD_JOY_DOWN 3
-
-#define GPIOF_LED1 6
-#define GPIOF_LED2 7
-#define GPIOF_LED3 8
-#define GPIOF_LED4 9
-#define GPIOF_SD_DETECT 11
-
-#define GPIOG_JOY_SEL 7
-#define GPIOG_USER_BUTTON 8
-#define GPIOG_JOY_RIGHT 13
-#define GPIOG_JOY_LEFT 14
-#define GPIOG_JOY_UP 15
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_ANALOG(n) (0 << (((n) & 7) * 4))
-#define PIN_OUTPUT_PP_10(n) (1 << (((n) & 7) * 4))
-#define PIN_OUTPUT_PP_2(n) (2 << (((n) & 7) * 4))
-#define PIN_OUTPUT_PP_50(n) (3 << (((n) & 7) * 4))
-#define PIN_INPUT(n) (4 << (((n) & 7) * 4))
-#define PIN_OUTPUT_OD_10(n) (5 << (((n) & 7) * 4))
-#define PIN_OUTPUT_OD_2(n) (6 << (((n) & 7) * 4))
-#define PIN_OUTPUT_OD_50(n) (7 << (((n) & 7) * 4))
-#define PIN_INPUT_PUD(n) (8 << (((n) & 7) * 4))
-#define PIN_ALTERNATE_PP_10(n) (9 << (((n) & 7) * 4))
-#define PIN_ALTERNATE_PP_2(n) (10 << (((n) & 7) * 4))
-#define PIN_ALTERNATE_PP_50(n) (11 << (((n) & 7) * 4))
-#define PIN_ALTERNATE_OD_10(n) (13 << (((n) & 7) * 4))
-#define PIN_ALTERNATE_OD_2(n) (14 << (((n) & 7) * 4))
-#define PIN_ALTERNATE_OD_50(n) (15 << (((n) & 7) * 4))
-#define PIN_UNDEFINED(n) PIN_INPUT_PUD(n)
-
-/*
- * Port A setup.
- */
-#define VAL_GPIOACRL (PIN_INPUT(0) | /* Wakeup Button. */ \
- PIN_OUTPUT_PP_50(1) | /* USART2_RTS. */ \
- PIN_ALTERNATE_PP_50(2) | /* USART2_TX. */ \
- PIN_INPUT(3) | /* USART2_RX. */ \
- PIN_UNDEFINED(4) | \
- PIN_ALTERNATE_PP_50(5) | /* SPI1_SCK. */ \
- PIN_INPUT(6) | /* SPI1_MISO. */ \
- PIN_ALTERNATE_PP_50(7)) /* SPI1_MOSI. */
-#define VAL_GPIOACRH (PIN_ALTERNATE_PP_50(8) | /* MCO. */ \
- PIN_ALTERNATE_PP_50(9) | /* USART1_TX. */ \
- PIN_INPUT(10) | /* USART1_RX. */ \
- PIN_INPUT_PUD(11) | /* USB_DM. */ \
- PIN_INPUT_PUD(12) | /* USB_DP. */ \
- PIN_INPUT(13) | /* TMS. */ \
- PIN_INPUT(14) | /* TCK. */ \
- PIN_INPUT(15)) /* TDI. */
-#define VAL_GPIOAODR 0xFFFFFFFF
-
-/*
- * Port B setup.
- */
-#define VAL_GPIOBCRL (PIN_OUTPUT_PP_50(0) | /* SmartCard_3/5V. */ \
- PIN_INPUT_PUD(1) | /* Unconnected. */ \
- PIN_OUTPUT_PP_50(2) | /* SPI1_CS. */ \
- PIN_INPUT(3) | /* TDO. */ \
- PIN_INPUT(4) | /* TRST. */ \
- PIN_INPUT_PUD(5) | /* Temp.Sensor INT. */ \
- PIN_ALTERNATE_OD_50(6) | /* I2C1_SCK. */ \
- PIN_ALTERNATE_OD_50(7)) /* I2C1_SDA. */
-#define VAL_GPIOBCRH (PIN_INPUT(8) | /* CAN_RX. */ \
- PIN_ALTERNATE_PP_50(9) | /* CAN_TX. */ \
- PIN_ALTERNATE_OD_50(10)| /* SmartCard IO. */ \
- PIN_OUTPUT_PP_50(11) | /* SmartCard RST. */ \
- PIN_ALTERNATE_PP_50(12)| /* SmartCard CLK. */ \
- PIN_UNDEFINED(13) | \
- PIN_OUTPUT_PP_50(14) | /* USB disconnect. */ \
- PIN_UNDEFINED(15))
-#define VAL_GPIOBODR 0xFFFFFFFF
-
-/*
- * Port C setup.
- */
-#define VAL_GPIOCCRL (PIN_UNDEFINED(0) | \
- PIN_UNDEFINED(1) | \
- PIN_UNDEFINED(2) | \
- PIN_UNDEFINED(3) | \
- PIN_ANALOG(4) | /* Potentiometer. */ \
- PIN_UNDEFINED(5) | \
- PIN_OUTPUT_PP_50(6) | /* SmartCard CMDVCC. */ \
- PIN_INPUT(7)) /* SmartCard OFF. */
-#define VAL_GPIOCCRH (PIN_ALTERNATE_PP_50(8) | /* SDIO D0. */ \
- PIN_ALTERNATE_PP_50(9) | /* SDIO D1. */ \
- PIN_ALTERNATE_PP_50(10)| /* SDIO D2. */ \
- PIN_ALTERNATE_PP_50(11)| /* SDIO D3. */ \
- PIN_ALTERNATE_PP_50(12)| /* SDIO CLK. */ \
- PIN_INPUT(13) | /* Tamper Button. */ \
- PIN_INPUT(14) | /* OSC IN. */ \
- PIN_INPUT(15)) /* OSC OUT. */
-#define VAL_GPIOCODR 0xFFFFFFFF
-
-/*
- * Port D setup
- */
-#define VAL_GPIODCRL (PIN_ALTERNATE_PP_50(0) | /* FSMC_D2. */ \
- PIN_ALTERNATE_PP_50(1) | /* FSMC_D3. */ \
- PIN_ALTERNATE_PP_50(2) | /* SDIO CMD. */ \
- PIN_INPUT(3) | /* Joy Down. */ \
- PIN_ALTERNATE_PP_50(4) | /* FSMC_NOE. */ \
- PIN_ALTERNATE_PP_50(5) | /* FSMC_NWE. */ \
- PIN_INPUT(6) | /* FSMC_NWAIT. */ \
- PIN_ALTERNATE_PP_50(7)) /* FSMC_NCE2. */
-#define VAL_GPIODCRH (PIN_ALTERNATE_PP_50(8) | /* FSMC_D13. */ \
- PIN_ALTERNATE_PP_50(9) | /* FSMC_D14. */ \
- PIN_ALTERNATE_PP_50(10)| /* FSMC_D15. */ \
- PIN_ALTERNATE_PP_50(11)| /* FSMC_A16. */ \
- PIN_ALTERNATE_PP_50(12)| /* FSMC_A17. */ \
- PIN_ALTERNATE_PP_50(13)| /* FSMC_A18. */ \
- PIN_ALTERNATE_PP_50(14)| /* FSMC_D0. */ \
- PIN_ALTERNATE_PP_50(15)) /* FSMC_D1. */
-#define VAL_GPIODODR 0xFFFFFFFF
-
-/*
- * Port E setup.
- */
-#define VAL_GPIOECRL (PIN_ALTERNATE_PP_50(0) | /* FSMC_NBL0. */ \
- PIN_ALTERNATE_PP_50(1) | /* FSMC_NBL1. */ \
- PIN_ALTERNATE_PP_50(2) | /* FSMC_A23. */ \
- PIN_ALTERNATE_PP_50(3) | /* FSMC_A19. */ \
- PIN_ALTERNATE_PP_50(4) | /* FSMC_A20. */ \
- PIN_ALTERNATE_PP_50(5) | /* FSMC_A21. */ \
- PIN_ALTERNATE_PP_50(6) | /* FSMC_A22. */ \
- PIN_ALTERNATE_PP_50(7)) /* FSMC_D4. */
-#define VAL_GPIOECRH (PIN_ALTERNATE_PP_50(8) | /* FSMC_D5. */ \
- PIN_ALTERNATE_PP_50(9) | /* FSMC_D6. */ \
- PIN_ALTERNATE_PP_50(10)| /* FSMC_D7. */ \
- PIN_ALTERNATE_PP_50(11)| /* FSMC_D8. */ \
- PIN_ALTERNATE_PP_50(12)| /* FSMC_D9. */ \
- PIN_ALTERNATE_PP_50(13)| /* FSMC_D10. */ \
- PIN_ALTERNATE_PP_50(14)| /* FSMC_D11. */ \
- PIN_ALTERNATE_PP_50(15)) /* FSMC_D12. */
-#define VAL_GPIOEODR 0xFFFFFFFF
-
-/*
- * Port F setup.
- */
-#define VAL_GPIOFCRL (PIN_ALTERNATE_PP_50(0) | /* FSMC_A0. */ \
- PIN_ALTERNATE_PP_50(1) | /* FSMC_A1. */ \
- PIN_ALTERNATE_PP_50(2) | /* FSMC_A2. */ \
- PIN_ALTERNATE_PP_50(3) | /* FSMC_A3. */ \
- PIN_ALTERNATE_PP_50(4) | /* FSMC_A4. */ \
- PIN_ALTERNATE_PP_50(5) | /* FSMC_A5. */ \
- PIN_OUTPUT_PP_50(6) | /* LED1. */ \
- PIN_OUTPUT_PP_50(7)) /* LED2. */
-#define VAL_GPIOFCRH (PIN_OUTPUT_PP_50(8) | /* LED3. */ \
- PIN_OUTPUT_PP_50(9) | /* LED4. */ \
- PIN_UNDEFINED(10) | \
- PIN_INPUT_PUD(11) | /* SDCard detect. */ \
- PIN_ALTERNATE_PP_50(12)| /* FSMC_A6. */ \
- PIN_ALTERNATE_PP_50(13)| /* FSMC_A7. */ \
- PIN_ALTERNATE_PP_50(14)| /* FSMC_A8. */ \
- PIN_ALTERNATE_PP_50(15)) /* FSMC_A9. */
-#define VAL_GPIOFODR 0xFFFFFC3F
-
-/*
- * Port G setup.
- */
-#define VAL_GPIOGCRL (PIN_ALTERNATE_PP_50(0) | /* FSMC_A10. */ \
- PIN_ALTERNATE_PP_50(1) | /* FSMC_A11. */ \
- PIN_ALTERNATE_PP_50(2) | /* FSMC_A12. */ \
- PIN_ALTERNATE_PP_50(3) | /* FSMC_A13. */ \
- PIN_ALTERNATE_PP_50(4) | /* FSMC_A14. */ \
- PIN_ALTERNATE_PP_50(5) | /* FSMC_A15. */ \
- PIN_INPUT(6) | /* FSMC_INT2. */ \
- PIN_INPUT(7)) /* Joy Select. */
-#define VAL_GPIOGCRH (PIN_INPUT(8) | /* User Button. */ \
- PIN_ALTERNATE_PP_50(9) | /* FSMC_NE2. */ \
- PIN_ALTERNATE_PP_50(10)| /* FSMC_NE3. */ \
- PIN_OUTPUT_PP_50(11) | /* Audio PDN. */ \
- PIN_ALTERNATE_PP_50(12)| /* FSMC_NE4. */ \
- PIN_INPUT(13) | /* Joy Right. */ \
- PIN_INPUT(14) | /* Joy Left. */ \
- PIN_INPUT(15)) /* Joy Up. */
-#define VAL_GPIOGODR 0xFFFFF7FF
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-16 09:33:46 +0000