diff options
Diffstat (limited to 'boards/ST_STM32373C_EVAL')
| -rw-r--r-- | boards/ST_STM32373C_EVAL/board.c | 102 | ||||
| -rw-r--r-- | boards/ST_STM32373C_EVAL/board.h | 888 | ||||
| -rw-r--r-- | boards/ST_STM32373C_EVAL/board.mk | 5 | ||||
| -rw-r--r-- | boards/ST_STM32373C_EVAL/cfg/board.chcfg | 798 |
4 files changed, 0 insertions, 1793 deletions
diff --git a/boards/ST_STM32373C_EVAL/board.c b/boards/ST_STM32373C_EVAL/board.c deleted file mode 100644 index baafd6550..000000000 --- a/boards/ST_STM32373C_EVAL/board.c +++ /dev/null @@ -1,102 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config =
-{
- {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
- VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
- {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
- VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
- {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
- VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
- {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
- VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
- {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
- VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
- {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
- VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}
-};
-#endif
-
-/**
- * @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
- */
-void __early_init(void) {
-
- stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief SDC card detection.
- */
-bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
- (void)sdcp;
- /* TODO: Fill the implementation.*/
- return TRUE;
-}
-
-/**
- * @brief SDC card write protection detection.
- */
-bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
- (void)sdcp;
- /* TODO: Fill the implementation.*/
- return FALSE;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief MMC_SPI card detection.
- */
-bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return TRUE;
-}
-
-/**
- * @brief MMC_SPI card write protection detection.
- */
-bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
- (void)mmcp;
- /* TODO: Fill the implementation.*/
- return FALSE;
-}
-#endif
-
-/**
- * @brief Board-specific initialization code.
- * @todo Add your board-specific code, if any.
- */
-void boardInit(void) {
-}
diff --git a/boards/ST_STM32373C_EVAL/board.h b/boards/ST_STM32373C_EVAL/board.h deleted file mode 100644 index 13676e7e6..000000000 --- a/boards/ST_STM32373C_EVAL/board.h +++ /dev/null @@ -1,888 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for STMicroelectronics STM32373C-EVAL board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32373C_EVAL
-#define BOARD_NAME "STMicroelectronics STM32373C-EVAL"
-
-/*
- * Board oscillators-related settings.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK 32768
-#endif
-
-#define STM32_LSEDRV (3 << 3)
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK 8000000
-#endif
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F37X
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_WKUP_BUTTON 0
-#define GPIOA_LDR_OUT 1
-#define GPIOA_KEY_BUTTON 2
-#define GPIOA_PIN3 3
-#define GPIOA_PIN4 4
-#define GPIOA_PIN5 5
-#define GPIOA_PIN6 6
-#define GPIOA_COMP2_OUT 7
-#define GPIOA_I2C2_SMB 8
-#define GPIOA_I2C2_SCL 9
-#define GPIOA_I2C2_SDA 10
-#define GPIOA_USB_DM 11
-#define GPIOA_USB_DP 12
-#define GPIOA_SWDIO 13
-#define GPIOA_SWCLK 14
-#define GPIOA_JTDI 15
-
-#define GPIOB_MIC_IN 0
-#define GPIOB_ADC_POT_IN 1
-#define GPIOB_PIN2 2
-#define GPIOB_SWO 3
-#define GPIOB_JTRST 4
-#define GPIOB_PIN5 5
-#define GPIOB_I2C1_SCL 6
-#define GPIOB_I2C1_SDA 7
-#define GPIOB_PIN8 8
-#define GPIOB_PIN9 9
-#define GPIOB_PIN10 10
-#define GPIOB_PIN11 11
-#define GPIOB_PIN12 12
-#define GPIOB_PIN13 13
-#define GPIOB_PIN14 14
-#define GPIOB_PIN15 15
-
-#define GPIOC_LED1 0
-#define GPIOC_LED2 1
-#define GPIOC_LED3 2
-#define GPIOC_LED4 3
-#define GPIOC_PIN4 4
-#define GPIOC_USB_DISCONNECT 5
-#define GPIOC_PIN6 6
-#define GPIOC_PIN7 7
-#define GPIOC_PIN8 8
-#define GPIOC_PIN9 9
-#define GPIOC_SPI3_SCK 10
-#define GPIOC_SPI3_MISO 11
-#define GPIOC_SPI3_MOSI 12
-#define GPIOC_PIN13 13
-#define GPIOC_OSC32_IN 14
-#define GPIOC_OSC32_OUT 15
-
-#define GPIOD_CAN_RX 0
-#define GPIOD_CAN_TX 1
-#define GPIOD_LCD_CS 2
-#define GPIOD_USART2_CTS 3
-#define GPIOD_USART2_RST 4
-#define GPIOD_USART2_TX 5
-#define GPIOD_USART2_RX 6
-#define GPIOD_PIN7 7
-#define GPIOD_PIN8 8
-#define GPIOD_PIN9 9
-#define GPIOD_PIN10 10
-#define GPIOD_AUDIO_RST 11
-#define GPIOD_PIN12 12
-#define GPIOD_PIN13 13
-#define GPIOD_PIN14 14
-#define GPIOD_PIN15 15
-
-#define GPIOE_PIN0 0
-#define GPIOE_PIN1 1
-#define GPIOE_SD_CS 2
-#define GPIOE_SD_DETECT 3
-#define GPIOE_PIN4 4
-#define GPIOE_PIN5 5
-#define GPIOE_JOY_SEL 6
-#define GPIOE_RTD_IN 7
-#define GPIOE_PRESSUREP 8
-#define GPIOE_PRESSUREN 9
-#define GPIOE_PIN10 10
-#define GPIOE_PIN11 11
-#define GPIOE_PIN12 12
-#define GPIOE_PIN13 13
-#define GPIOE_PRESSURE_TEPM 14
-#define GPIOE_PIN15 15
-
-#define GPIOF_OSC_IN 0
-#define GPIOF_OSC_OUT 1
-#define GPIOF_JOY_DOWN 2
-#define GPIOF_PIN3 3
-#define GPIOF_JOY_LEFT 4
-#define GPIOF_PIN5 5
-#define GPIOF_PIN6 6
-#define GPIOF_PIN7 7
-#define GPIOF_PIN8 8
-#define GPIOF_JOY_RIGHT 9
-#define GPIOF_JOY_UP 10
-#define GPIOF_PIN11 11
-#define GPIOF_PIN12 12
-#define GPIOF_PIN13 13
-#define GPIOF_PIN14 14
-#define GPIOF_PIN15 15
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
-#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
-#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
-#define PIN_ODR_LOW(n) (0U << (n))
-#define PIN_ODR_HIGH(n) (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
-#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
-#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
-#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
-#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2))
-#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2))
-#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2))
-#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
-
-/*
- * GPIOA setup:
- *
- * PA0 - WKUP_BUTTON (input floating).
- * PA1 - LDR_OUT (analog).
- * PA2 - KEY_BUTTON (input floating).
- * PA3 - PIN3 (input pullup).
- * PA4 - PIN4 (input pullup).
- * PA5 - PIN5 (input floating).
- * PA6 - PIN6 (input pullup).
- * PA7 - COMP2_OUT (output pushpull maximum).
- * PA8 - I2C2_SMB (input floating).
- * PA9 - I2C2_SCL (alternate 4).
- * PA10 - I2C2_SDA (alternate 4).
- * PA11 - USB_DM (alternate 14).
- * PA12 - USB_DP (alternate 14).
- * PA13 - SWDIO (alternate 0).
- * PA14 - SWCLK (alternate 0).
- * PA15 - JTDI (alternate 0).
- */
-#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_WKUP_BUTTON) | \
- PIN_MODE_ANALOG(GPIOA_LDR_OUT) | \
- PIN_MODE_INPUT(GPIOA_KEY_BUTTON) | \
- PIN_MODE_INPUT(GPIOA_PIN3) | \
- PIN_MODE_INPUT(GPIOA_PIN4) | \
- PIN_MODE_INPUT(GPIOA_PIN5) | \
- PIN_MODE_INPUT(GPIOA_PIN6) | \
- PIN_MODE_OUTPUT(GPIOA_COMP2_OUT) | \
- PIN_MODE_INPUT(GPIOA_I2C2_SMB) | \
- PIN_MODE_ALTERNATE(GPIOA_I2C2_SCL) | \
- PIN_MODE_ALTERNATE(GPIOA_I2C2_SDA) | \
- PIN_MODE_ALTERNATE(GPIOA_USB_DM) | \
- PIN_MODE_ALTERNATE(GPIOA_USB_DP) | \
- PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
- PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
- PIN_MODE_ALTERNATE(GPIOA_JTDI))
-#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_WKUP_BUTTON) |\
- PIN_OTYPE_PUSHPULL(GPIOA_LDR_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOA_KEY_BUTTON) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOA_COMP2_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOA_I2C2_SMB) | \
- PIN_OTYPE_OPENDRAIN(GPIOA_I2C2_SCL) | \
- PIN_OTYPE_OPENDRAIN(GPIOA_I2C2_SDA) | \
- PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
- PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
- PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
- PIN_OTYPE_PUSHPULL(GPIOA_JTDI))
-#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_2M(GPIOA_WKUP_BUTTON) | \
- PIN_OSPEED_2M(GPIOA_LDR_OUT) | \
- PIN_OSPEED_2M(GPIOA_KEY_BUTTON) | \
- PIN_OSPEED_2M(GPIOA_PIN3) | \
- PIN_OSPEED_2M(GPIOA_PIN4) | \
- PIN_OSPEED_100M(GPIOA_PIN5) | \
- PIN_OSPEED_2M(GPIOA_PIN6) | \
- PIN_OSPEED_100M(GPIOA_COMP2_OUT) | \
- PIN_OSPEED_2M(GPIOA_I2C2_SMB) | \
- PIN_OSPEED_100M(GPIOA_I2C2_SCL) | \
- PIN_OSPEED_100M(GPIOA_I2C2_SDA) | \
- PIN_OSPEED_100M(GPIOA_USB_DM) | \
- PIN_OSPEED_2M(GPIOA_USB_DP) | \
- PIN_OSPEED_100M(GPIOA_SWDIO) | \
- PIN_OSPEED_100M(GPIOA_SWCLK) | \
- PIN_OSPEED_100M(GPIOA_JTDI))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_WKUP_BUTTON) |\
- PIN_PUPDR_FLOATING(GPIOA_LDR_OUT) | \
- PIN_PUPDR_FLOATING(GPIOA_KEY_BUTTON) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOA_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
- PIN_PUPDR_FLOATING(GPIOA_COMP2_OUT) | \
- PIN_PUPDR_FLOATING(GPIOA_I2C2_SMB) | \
- PIN_PUPDR_FLOATING(GPIOA_I2C2_SCL) | \
- PIN_PUPDR_FLOATING(GPIOA_I2C2_SDA) | \
- PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
- PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
- PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
- PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
- PIN_PUPDR_FLOATING(GPIOA_JTDI))
-#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_WKUP_BUTTON) | \
- PIN_ODR_HIGH(GPIOA_LDR_OUT) | \
- PIN_ODR_HIGH(GPIOA_KEY_BUTTON) | \
- PIN_ODR_HIGH(GPIOA_PIN3) | \
- PIN_ODR_HIGH(GPIOA_PIN4) | \
- PIN_ODR_HIGH(GPIOA_PIN5) | \
- PIN_ODR_HIGH(GPIOA_PIN6) | \
- PIN_ODR_LOW(GPIOA_COMP2_OUT) | \
- PIN_ODR_HIGH(GPIOA_I2C2_SMB) | \
- PIN_ODR_HIGH(GPIOA_I2C2_SCL) | \
- PIN_ODR_HIGH(GPIOA_I2C2_SDA) | \
- PIN_ODR_HIGH(GPIOA_USB_DM) | \
- PIN_ODR_HIGH(GPIOA_USB_DP) | \
- PIN_ODR_HIGH(GPIOA_SWDIO) | \
- PIN_ODR_HIGH(GPIOA_SWCLK) | \
- PIN_ODR_HIGH(GPIOA_JTDI))
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_WKUP_BUTTON, 0) | \
- PIN_AFIO_AF(GPIOA_LDR_OUT, 0) | \
- PIN_AFIO_AF(GPIOA_KEY_BUTTON, 0) | \
- PIN_AFIO_AF(GPIOA_PIN3, 0) | \
- PIN_AFIO_AF(GPIOA_PIN4, 0) | \
- PIN_AFIO_AF(GPIOA_PIN5, 5) | \
- PIN_AFIO_AF(GPIOA_PIN6, 0) | \
- PIN_AFIO_AF(GPIOA_COMP2_OUT, 0))
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_I2C2_SMB, 0) | \
- PIN_AFIO_AF(GPIOA_I2C2_SCL, 4) | \
- PIN_AFIO_AF(GPIOA_I2C2_SDA, 4) | \
- PIN_AFIO_AF(GPIOA_USB_DM, 14) | \
- PIN_AFIO_AF(GPIOA_USB_DP, 14) | \
- PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
- PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
- PIN_AFIO_AF(GPIOA_JTDI, 0))
-
-/*
- * GPIOB setup:
- *
- * PB0 - MIC_IN (analog).
- * PB1 - ADC_POT_IN (analog).
- * PB2 - PIN2 (input pullup).
- * PB3 - SWO (alternate 0).
- * PB4 - JTRST (input floating).
- * PB5 - PIN5 (input pullup).
- * PB6 - I2C1_SCL (alternate 4).
- * PB7 - I2C1_SDA (alternate 4).
- * PB8 - PIN8 (input pullup).
- * PB9 - PIN9 (input pullup).
- * PB10 - PIN10 (input pullup).
- * PB11 - PIN11 (input pullup).
- * PB12 - PIN12 (input pullup).
- * PB13 - PIN13 (input pullup).
- * PB14 - PIN14 (input pullup).
- * PB15 - PIN15 (input pullup).
- */
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_MIC_IN) | \
- PIN_MODE_ANALOG(GPIOB_ADC_POT_IN) | \
- PIN_MODE_INPUT(GPIOB_PIN2) | \
- PIN_MODE_ALTERNATE(GPIOB_SWO) | \
- PIN_MODE_INPUT(GPIOB_JTRST) | \
- PIN_MODE_INPUT(GPIOB_PIN5) | \
- PIN_MODE_ALTERNATE(GPIOB_I2C1_SCL) | \
- PIN_MODE_ALTERNATE(GPIOB_I2C1_SDA) | \
- PIN_MODE_INPUT(GPIOB_PIN8) | \
- PIN_MODE_INPUT(GPIOB_PIN9) | \
- PIN_MODE_INPUT(GPIOB_PIN10) | \
- PIN_MODE_INPUT(GPIOB_PIN11) | \
- PIN_MODE_INPUT(GPIOB_PIN12) | \
- PIN_MODE_INPUT(GPIOB_PIN13) | \
- PIN_MODE_INPUT(GPIOB_PIN14) | \
- PIN_MODE_INPUT(GPIOB_PIN15))
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_MIC_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOB_ADC_POT_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
- PIN_OTYPE_PUSHPULL(GPIOB_SWO) | \
- PIN_OTYPE_PUSHPULL(GPIOB_JTRST) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_I2C1_SCL) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_I2C1_SDA) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
-#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_2M(GPIOB_MIC_IN) | \
- PIN_OSPEED_2M(GPIOB_ADC_POT_IN) | \
- PIN_OSPEED_2M(GPIOB_PIN2) | \
- PIN_OSPEED_100M(GPIOB_SWO) | \
- PIN_OSPEED_100M(GPIOB_JTRST) | \
- PIN_OSPEED_2M(GPIOB_PIN5) | \
- PIN_OSPEED_100M(GPIOB_I2C1_SCL) | \
- PIN_OSPEED_100M(GPIOB_I2C1_SDA) | \
- PIN_OSPEED_2M(GPIOB_PIN8) | \
- PIN_OSPEED_2M(GPIOB_PIN9) | \
- PIN_OSPEED_2M(GPIOB_PIN10) | \
- PIN_OSPEED_2M(GPIOB_PIN11) | \
- PIN_OSPEED_2M(GPIOB_PIN12) | \
- PIN_OSPEED_2M(GPIOB_PIN13) | \
- PIN_OSPEED_2M(GPIOB_PIN14) | \
- PIN_OSPEED_2M(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_MIC_IN) | \
- PIN_PUPDR_FLOATING(GPIOB_ADC_POT_IN) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
- PIN_PUPDR_FLOATING(GPIOB_SWO) | \
- PIN_PUPDR_FLOATING(GPIOB_JTRST) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
- PIN_PUPDR_FLOATING(GPIOB_I2C1_SCL) | \
- PIN_PUPDR_FLOATING(GPIOB_I2C1_SDA) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOB_PIN15))
-#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_MIC_IN) | \
- PIN_ODR_HIGH(GPIOB_ADC_POT_IN) | \
- PIN_ODR_HIGH(GPIOB_PIN2) | \
- PIN_ODR_HIGH(GPIOB_SWO) | \
- PIN_ODR_HIGH(GPIOB_JTRST) | \
- PIN_ODR_HIGH(GPIOB_PIN5) | \
- PIN_ODR_HIGH(GPIOB_I2C1_SCL) | \
- PIN_ODR_HIGH(GPIOB_I2C1_SDA) | \
- PIN_ODR_HIGH(GPIOB_PIN8) | \
- PIN_ODR_HIGH(GPIOB_PIN9) | \
- PIN_ODR_HIGH(GPIOB_PIN10) | \
- PIN_ODR_HIGH(GPIOB_PIN11) | \
- PIN_ODR_HIGH(GPIOB_PIN12) | \
- PIN_ODR_HIGH(GPIOB_PIN13) | \
- PIN_ODR_HIGH(GPIOB_PIN14) | \
- PIN_ODR_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_MIC_IN, 0) | \
- PIN_AFIO_AF(GPIOB_ADC_POT_IN, 0) | \
- PIN_AFIO_AF(GPIOB_PIN2, 0) | \
- PIN_AFIO_AF(GPIOB_SWO, 0) | \
- PIN_AFIO_AF(GPIOB_JTRST, 0) | \
- PIN_AFIO_AF(GPIOB_PIN5, 0) | \
- PIN_AFIO_AF(GPIOB_I2C1_SCL, 4) | \
- PIN_AFIO_AF(GPIOB_I2C1_SDA, 4))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \
- PIN_AFIO_AF(GPIOB_PIN9, 0) | \
- PIN_AFIO_AF(GPIOB_PIN10, 0) | \
- PIN_AFIO_AF(GPIOB_PIN11, 0) | \
- PIN_AFIO_AF(GPIOB_PIN12, 0) | \
- PIN_AFIO_AF(GPIOB_PIN13, 0) | \
- PIN_AFIO_AF(GPIOB_PIN14, 0) | \
- PIN_AFIO_AF(GPIOB_PIN15, 0))
-
-/*
- * GPIOC setup:
- *
- * PC0 - LED1 (output opendrain maximum).
- * PC1 - LED2 (output opendrain maximum).
- * PC2 - LED3 (output opendrain maximum).
- * PC3 - LED4 (output opendrain maximum).
- * PC4 - PIN4 (input pullup).
- * PC5 - USB_DISCONNECT (output pushpull maximum).
- * PC6 - PIN6 (input pullup).
- * PC7 - PIN7 (input pullup).
- * PC8 - PIN8 (input pullup).
- * PC9 - PIN9 (input pullup).
- * PC10 - SPI3_SCK (alternate 6).
- * PC11 - SPI3_MISO (alternate 6).
- * PC12 - SPI3_MOSI (alternate 6).
- * PC13 - PIN13 (input pullup).
- * PC14 - OSC32_IN (input floating).
- * PC15 - OSC32_OUT (input floating).
- */
-#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_LED1) | \
- PIN_MODE_OUTPUT(GPIOC_LED2) | \
- PIN_MODE_OUTPUT(GPIOC_LED3) | \
- PIN_MODE_OUTPUT(GPIOC_LED4) | \
- PIN_MODE_INPUT(GPIOC_PIN4) | \
- PIN_MODE_OUTPUT(GPIOC_USB_DISCONNECT) |\
- PIN_MODE_INPUT(GPIOC_PIN6) | \
- PIN_MODE_INPUT(GPIOC_PIN7) | \
- PIN_MODE_INPUT(GPIOC_PIN8) | \
- PIN_MODE_INPUT(GPIOC_PIN9) | \
- PIN_MODE_ALTERNATE(GPIOC_SPI3_SCK) | \
- PIN_MODE_ALTERNATE(GPIOC_SPI3_MISO) | \
- PIN_MODE_ALTERNATE(GPIOC_SPI3_MOSI) | \
- PIN_MODE_INPUT(GPIOC_PIN13) | \
- PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
- PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER (PIN_OTYPE_OPENDRAIN(GPIOC_LED1) | \
- PIN_OTYPE_OPENDRAIN(GPIOC_LED2) | \
- PIN_OTYPE_OPENDRAIN(GPIOC_LED3) | \
- PIN_OTYPE_OPENDRAIN(GPIOC_LED4) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOC_USB_DISCONNECT) |\
- PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SPI3_SCK) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SPI3_MISO) | \
- PIN_OTYPE_PUSHPULL(GPIOC_SPI3_MOSI) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_100M(GPIOC_LED1) | \
- PIN_OSPEED_100M(GPIOC_LED2) | \
- PIN_OSPEED_100M(GPIOC_LED3) | \
- PIN_OSPEED_100M(GPIOC_LED4) | \
- PIN_OSPEED_2M(GPIOC_PIN4) | \
- PIN_OSPEED_100M(GPIOC_USB_DISCONNECT) |\
- PIN_OSPEED_2M(GPIOC_PIN6) | \
- PIN_OSPEED_2M(GPIOC_PIN7) | \
- PIN_OSPEED_2M(GPIOC_PIN8) | \
- PIN_OSPEED_2M(GPIOC_PIN9) | \
- PIN_OSPEED_100M(GPIOC_SPI3_SCK) | \
- PIN_OSPEED_100M(GPIOC_SPI3_MISO) | \
- PIN_OSPEED_100M(GPIOC_SPI3_MOSI) | \
- PIN_OSPEED_2M(GPIOC_PIN13) | \
- PIN_OSPEED_100M(GPIOC_OSC32_IN) | \
- PIN_OSPEED_100M(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_LED1) | \
- PIN_PUPDR_FLOATING(GPIOC_LED2) | \
- PIN_PUPDR_FLOATING(GPIOC_LED3) | \
- PIN_PUPDR_FLOATING(GPIOC_LED4) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
- PIN_PUPDR_FLOATING(GPIOC_USB_DISCONNECT) |\
- PIN_PUPDR_PULLUP(GPIOC_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN9) | \
- PIN_PUPDR_FLOATING(GPIOC_SPI3_SCK) | \
- PIN_PUPDR_PULLUP(GPIOC_SPI3_MISO) | \
- PIN_PUPDR_FLOATING(GPIOC_SPI3_MOSI) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
- PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_LED1) | \
- PIN_ODR_HIGH(GPIOC_LED2) | \
- PIN_ODR_HIGH(GPIOC_LED3) | \
- PIN_ODR_HIGH(GPIOC_LED4) | \
- PIN_ODR_HIGH(GPIOC_PIN4) | \
- PIN_ODR_HIGH(GPIOC_USB_DISCONNECT) | \
- PIN_ODR_HIGH(GPIOC_PIN6) | \
- PIN_ODR_HIGH(GPIOC_PIN7) | \
- PIN_ODR_HIGH(GPIOC_PIN8) | \
- PIN_ODR_HIGH(GPIOC_PIN9) | \
- PIN_ODR_HIGH(GPIOC_SPI3_SCK) | \
- PIN_ODR_HIGH(GPIOC_SPI3_MISO) | \
- PIN_ODR_HIGH(GPIOC_SPI3_MOSI) | \
- PIN_ODR_HIGH(GPIOC_PIN13) | \
- PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
- PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_LED1, 0) | \
- PIN_AFIO_AF(GPIOC_LED2, 0) | \
- PIN_AFIO_AF(GPIOC_LED3, 0) | \
- PIN_AFIO_AF(GPIOC_LED4, 0) | \
- PIN_AFIO_AF(GPIOC_PIN4, 0) | \
- PIN_AFIO_AF(GPIOC_USB_DISCONNECT, 0) | \
- PIN_AFIO_AF(GPIOC_PIN6, 0) | \
- PIN_AFIO_AF(GPIOC_PIN7, 0))
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \
- PIN_AFIO_AF(GPIOC_PIN9, 0) | \
- PIN_AFIO_AF(GPIOC_SPI3_SCK, 6) | \
- PIN_AFIO_AF(GPIOC_SPI3_MISO, 6) | \
- PIN_AFIO_AF(GPIOC_SPI3_MOSI, 6) | \
- PIN_AFIO_AF(GPIOC_PIN13, 0) | \
- PIN_AFIO_AF(GPIOC_OSC32_IN, 0) | \
- PIN_AFIO_AF(GPIOC_OSC32_OUT, 0))
-
-/*
- * GPIOD setup:
- *
- * PD0 - CAN_RX (alternate 7).
- * PD1 - CAN_TX (alternate 7).
- * PD2 - LCD_CS (output pushpull maximum).
- * PD3 - USART2_CTS (alternate 7).
- * PD4 - USART2_RST (alternate 7).
- * PD5 - USART2_TX (alternate 7).
- * PD6 - USART2_RX (alternate 7).
- * PD7 - PIN7 (input pullup).
- * PD8 - PIN8 (input pullup).
- * PD9 - PIN9 (input pullup).
- * PD10 - PIN10 (input pullup).
- * PD11 - AUDIO_RST (output pushpull maximum).
- * PD12 - PIN12 (input pullup).
- * PD13 - PIN13 (input pullup).
- * PD14 - PIN14 (input pullup).
- * PD15 - PIN15 (input pullup).
- */
-#define VAL_GPIOD_MODER (PIN_MODE_ALTERNATE(GPIOD_CAN_RX) | \
- PIN_MODE_ALTERNATE(GPIOD_CAN_TX) | \
- PIN_MODE_OUTPUT(GPIOD_LCD_CS) | \
- PIN_MODE_ALTERNATE(GPIOD_USART2_CTS) | \
- PIN_MODE_ALTERNATE(GPIOD_USART2_RST) | \
- PIN_MODE_ALTERNATE(GPIOD_USART2_TX) | \
- PIN_MODE_ALTERNATE(GPIOD_USART2_RX) | \
- PIN_MODE_INPUT(GPIOD_PIN7) | \
- PIN_MODE_INPUT(GPIOD_PIN8) | \
- PIN_MODE_INPUT(GPIOD_PIN9) | \
- PIN_MODE_INPUT(GPIOD_PIN10) | \
- PIN_MODE_OUTPUT(GPIOD_AUDIO_RST) | \
- PIN_MODE_INPUT(GPIOD_PIN12) | \
- PIN_MODE_INPUT(GPIOD_PIN13) | \
- PIN_MODE_INPUT(GPIOD_PIN14) | \
- PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_CAN_RX) | \
- PIN_OTYPE_PUSHPULL(GPIOD_CAN_TX) | \
- PIN_OTYPE_PUSHPULL(GPIOD_LCD_CS) | \
- PIN_OTYPE_PUSHPULL(GPIOD_USART2_CTS) | \
- PIN_OTYPE_PUSHPULL(GPIOD_USART2_RST) | \
- PIN_OTYPE_PUSHPULL(GPIOD_USART2_TX) | \
- PIN_OTYPE_PUSHPULL(GPIOD_USART2_RX) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOD_AUDIO_RST) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_100M(GPIOD_CAN_RX) | \
- PIN_OSPEED_100M(GPIOD_CAN_TX) | \
- PIN_OSPEED_100M(GPIOD_LCD_CS) | \
- PIN_OSPEED_100M(GPIOD_USART2_CTS) | \
- PIN_OSPEED_100M(GPIOD_USART2_RST) | \
- PIN_OSPEED_100M(GPIOD_USART2_TX) | \
- PIN_OSPEED_100M(GPIOD_USART2_RX) | \
- PIN_OSPEED_2M(GPIOD_PIN7) | \
- PIN_OSPEED_2M(GPIOD_PIN8) | \
- PIN_OSPEED_2M(GPIOD_PIN9) | \
- PIN_OSPEED_2M(GPIOD_PIN10) | \
- PIN_OSPEED_100M(GPIOD_AUDIO_RST) | \
- PIN_OSPEED_2M(GPIOD_PIN12) | \
- PIN_OSPEED_2M(GPIOD_PIN13) | \
- PIN_OSPEED_2M(GPIOD_PIN14) | \
- PIN_OSPEED_2M(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR (PIN_PUPDR_FLOATING(GPIOD_CAN_RX) | \
- PIN_PUPDR_FLOATING(GPIOD_CAN_TX) | \
- PIN_PUPDR_FLOATING(GPIOD_LCD_CS) | \
- PIN_PUPDR_FLOATING(GPIOD_USART2_CTS) | \
- PIN_PUPDR_FLOATING(GPIOD_USART2_RST) | \
- PIN_PUPDR_FLOATING(GPIOD_USART2_TX) | \
- PIN_PUPDR_FLOATING(GPIOD_USART2_RX) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
- PIN_PUPDR_FLOATING(GPIOD_AUDIO_RST) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_CAN_RX) | \
- PIN_ODR_HIGH(GPIOD_CAN_TX) | \
- PIN_ODR_HIGH(GPIOD_LCD_CS) | \
- PIN_ODR_HIGH(GPIOD_USART2_CTS) | \
- PIN_ODR_HIGH(GPIOD_USART2_RST) | \
- PIN_ODR_HIGH(GPIOD_USART2_TX) | \
- PIN_ODR_HIGH(GPIOD_USART2_RX) | \
- PIN_ODR_HIGH(GPIOD_PIN7) | \
- PIN_ODR_HIGH(GPIOD_PIN8) | \
- PIN_ODR_HIGH(GPIOD_PIN9) | \
- PIN_ODR_HIGH(GPIOD_PIN10) | \
- PIN_ODR_LOW(GPIOD_AUDIO_RST) | \
- PIN_ODR_HIGH(GPIOD_PIN12) | \
- PIN_ODR_HIGH(GPIOD_PIN13) | \
- PIN_ODR_HIGH(GPIOD_PIN14) | \
- PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_CAN_RX, 7) | \
- PIN_AFIO_AF(GPIOD_CAN_TX, 7) | \
- PIN_AFIO_AF(GPIOD_LCD_CS, 0) | \
- PIN_AFIO_AF(GPIOD_USART2_CTS, 7) | \
- PIN_AFIO_AF(GPIOD_USART2_RST, 7) | \
- PIN_AFIO_AF(GPIOD_USART2_TX, 7) | \
- PIN_AFIO_AF(GPIOD_USART2_RX, 7) | \
- PIN_AFIO_AF(GPIOD_PIN7, 0))
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \
- PIN_AFIO_AF(GPIOD_PIN9, 0) | \
- PIN_AFIO_AF(GPIOD_PIN10, 0) | \
- PIN_AFIO_AF(GPIOD_AUDIO_RST, 0) | \
- PIN_AFIO_AF(GPIOD_PIN12, 0) | \
- PIN_AFIO_AF(GPIOD_PIN13, 0) | \
- PIN_AFIO_AF(GPIOD_PIN14, 0) | \
- PIN_AFIO_AF(GPIOD_PIN15, 0))
-
-/*
- * GPIOE setup:
- *
- * PE0 - PIN0 (input pullup).
- * PE1 - PIN1 (input pullup).
- * PE2 - SD_CS (output opendrain maximum).
- * PE3 - SD_DETECT (input pullup).
- * PE4 - PIN4 (input pullup).
- * PE5 - PIN5 (input pullup).
- * PE6 - JOY_SEL (input pulldown).
- * PE7 - RTD_IN (analog).
- * PE8 - PRESSUREP (analog).
- * PE9 - PRESSUREN (analog).
- * PE10 - PIN10 (input pullup).
- * PE11 - PIN11 (input pullup).
- * PE12 - PIN12 (input pullup).
- * PE13 - PIN13 (input pullup).
- * PE14 - PRESSURE_TEPM (input floating).
- * PE15 - PIN15 (input pullup).
- */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
- PIN_MODE_INPUT(GPIOE_PIN1) | \
- PIN_MODE_OUTPUT(GPIOE_SD_CS) | \
- PIN_MODE_INPUT(GPIOE_SD_DETECT) | \
- PIN_MODE_INPUT(GPIOE_PIN4) | \
- PIN_MODE_INPUT(GPIOE_PIN5) | \
- PIN_MODE_INPUT(GPIOE_JOY_SEL) | \
- PIN_MODE_ANALOG(GPIOE_RTD_IN) | \
- PIN_MODE_ANALOG(GPIOE_PRESSUREP) | \
- PIN_MODE_ANALOG(GPIOE_PRESSUREN) | \
- PIN_MODE_INPUT(GPIOE_PIN10) | \
- PIN_MODE_INPUT(GPIOE_PIN11) | \
- PIN_MODE_INPUT(GPIOE_PIN12) | \
- PIN_MODE_INPUT(GPIOE_PIN13) | \
- PIN_MODE_INPUT(GPIOE_PRESSURE_TEPM) | \
- PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
- PIN_OTYPE_OPENDRAIN(GPIOE_SD_CS) | \
- PIN_OTYPE_PUSHPULL(GPIOE_SD_DETECT) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOE_JOY_SEL) | \
- PIN_OTYPE_PUSHPULL(GPIOE_RTD_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PRESSUREP) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PRESSUREN) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PRESSURE_TEPM) |\
- PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_2M(GPIOE_PIN0) | \
- PIN_OSPEED_2M(GPIOE_PIN1) | \
- PIN_OSPEED_100M(GPIOE_SD_CS) | \
- PIN_OSPEED_100M(GPIOE_SD_DETECT) | \
- PIN_OSPEED_2M(GPIOE_PIN4) | \
- PIN_OSPEED_2M(GPIOE_PIN5) | \
- PIN_OSPEED_100M(GPIOE_JOY_SEL) | \
- PIN_OSPEED_2M(GPIOE_RTD_IN) | \
- PIN_OSPEED_100M(GPIOE_PRESSUREP) | \
- PIN_OSPEED_100M(GPIOE_PRESSUREN) | \
- PIN_OSPEED_2M(GPIOE_PIN10) | \
- PIN_OSPEED_2M(GPIOE_PIN11) | \
- PIN_OSPEED_2M(GPIOE_PIN12) | \
- PIN_OSPEED_2M(GPIOE_PIN13) | \
- PIN_OSPEED_2M(GPIOE_PRESSURE_TEPM) | \
- PIN_OSPEED_2M(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
- PIN_PUPDR_FLOATING(GPIOE_SD_CS) | \
- PIN_PUPDR_PULLUP(GPIOE_SD_DETECT) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
- PIN_PUPDR_PULLDOWN(GPIOE_JOY_SEL) | \
- PIN_PUPDR_FLOATING(GPIOE_RTD_IN) | \
- PIN_PUPDR_FLOATING(GPIOE_PRESSUREP) | \
- PIN_PUPDR_FLOATING(GPIOE_PRESSUREN) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
- PIN_PUPDR_FLOATING(GPIOE_PRESSURE_TEPM) |\
- PIN_PUPDR_PULLUP(GPIOE_PIN15))
-#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
- PIN_ODR_HIGH(GPIOE_PIN1) | \
- PIN_ODR_HIGH(GPIOE_SD_CS) | \
- PIN_ODR_HIGH(GPIOE_SD_DETECT) | \
- PIN_ODR_HIGH(GPIOE_PIN4) | \
- PIN_ODR_HIGH(GPIOE_PIN5) | \
- PIN_ODR_HIGH(GPIOE_JOY_SEL) | \
- PIN_ODR_HIGH(GPIOE_RTD_IN) | \
- PIN_ODR_HIGH(GPIOE_PRESSUREP) | \
- PIN_ODR_HIGH(GPIOE_PRESSUREN) | \
- PIN_ODR_HIGH(GPIOE_PIN10) | \
- PIN_ODR_HIGH(GPIOE_PIN11) | \
- PIN_ODR_HIGH(GPIOE_PIN12) | \
- PIN_ODR_LOW(GPIOE_PIN13) | \
- PIN_ODR_LOW(GPIOE_PRESSURE_TEPM) | \
- PIN_ODR_LOW(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | \
- PIN_AFIO_AF(GPIOE_PIN1, 0) | \
- PIN_AFIO_AF(GPIOE_SD_CS, 0) | \
- PIN_AFIO_AF(GPIOE_SD_DETECT, 0) | \
- PIN_AFIO_AF(GPIOE_PIN4, 0) | \
- PIN_AFIO_AF(GPIOE_PIN5, 0) | \
- PIN_AFIO_AF(GPIOE_JOY_SEL, 0) | \
- PIN_AFIO_AF(GPIOE_RTD_IN, 0))
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PRESSUREP, 0) | \
- PIN_AFIO_AF(GPIOE_PRESSUREN, 0) | \
- PIN_AFIO_AF(GPIOE_PIN10, 0) | \
- PIN_AFIO_AF(GPIOE_PIN11, 0) | \
- PIN_AFIO_AF(GPIOE_PIN12, 0) | \
- PIN_AFIO_AF(GPIOE_PIN13, 0) | \
- PIN_AFIO_AF(GPIOE_PRESSURE_TEPM, 0) | \
- PIN_AFIO_AF(GPIOE_PIN15, 0))
-
-/*
- * GPIOF setup:
- *
- * PF0 - OSC_IN (input floating).
- * PF1 - OSC_OUT (input floating).
- * PF2 - JOY_DOWN (input pulldown).
- * PF3 - PIN3 (input pullup).
- * PF4 - JOY_LEFT (input pulldown).
- * PF5 - PIN5 (input pullup).
- * PF6 - PIN6 (input pullup).
- * PF7 - PIN7 (input pullup).
- * PF8 - PIN8 (input pullup).
- * PF9 - JOY_RIGHT (input pulldown).
- * PF10 - JOY_UP (input pulldown).
- * PF11 - PIN11 (input pullup).
- * PF12 - PIN12 (input pullup).
- * PF13 - PIN13 (input pullup).
- * PF14 - PIN14 (input pullup).
- * PF15 - PIN15 (input pullup).
- */
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
- PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
- PIN_MODE_INPUT(GPIOF_JOY_DOWN) | \
- PIN_MODE_INPUT(GPIOF_PIN3) | \
- PIN_MODE_INPUT(GPIOF_JOY_LEFT) | \
- PIN_MODE_INPUT(GPIOF_PIN5) | \
- PIN_MODE_INPUT(GPIOF_PIN6) | \
- PIN_MODE_INPUT(GPIOF_PIN7) | \
- PIN_MODE_INPUT(GPIOF_PIN8) | \
- PIN_MODE_INPUT(GPIOF_JOY_RIGHT) | \
- PIN_MODE_INPUT(GPIOF_JOY_UP) | \
- PIN_MODE_INPUT(GPIOF_PIN11) | \
- PIN_MODE_INPUT(GPIOF_PIN12) | \
- PIN_MODE_INPUT(GPIOF_PIN13) | \
- PIN_MODE_INPUT(GPIOF_PIN14) | \
- PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
- PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
- PIN_OTYPE_PUSHPULL(GPIOF_JOY_DOWN) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
- PIN_OTYPE_PUSHPULL(GPIOF_JOY_LEFT) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
- PIN_OTYPE_PUSHPULL(GPIOF_JOY_RIGHT) | \
- PIN_OTYPE_PUSHPULL(GPIOF_JOY_UP) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_100M(GPIOF_OSC_IN) | \
- PIN_OSPEED_100M(GPIOF_OSC_OUT) | \
- PIN_OSPEED_100M(GPIOF_JOY_DOWN) | \
- PIN_OSPEED_2M(GPIOF_PIN3) | \
- PIN_OSPEED_100M(GPIOF_JOY_LEFT) | \
- PIN_OSPEED_2M(GPIOF_PIN5) | \
- PIN_OSPEED_2M(GPIOF_PIN6) | \
- PIN_OSPEED_2M(GPIOF_PIN7) | \
- PIN_OSPEED_2M(GPIOF_PIN8) | \
- PIN_OSPEED_100M(GPIOF_JOY_RIGHT) | \
- PIN_OSPEED_100M(GPIOF_JOY_UP) | \
- PIN_OSPEED_2M(GPIOF_PIN11) | \
- PIN_OSPEED_2M(GPIOF_PIN12) | \
- PIN_OSPEED_2M(GPIOF_PIN13) | \
- PIN_OSPEED_2M(GPIOF_PIN14) | \
- PIN_OSPEED_2M(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
- PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
- PIN_PUPDR_PULLDOWN(GPIOF_JOY_DOWN) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
- PIN_PUPDR_PULLDOWN(GPIOF_JOY_LEFT) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
- PIN_PUPDR_PULLDOWN(GPIOF_JOY_RIGHT) | \
- PIN_PUPDR_PULLDOWN(GPIOF_JOY_UP) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
- PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
- PIN_ODR_HIGH(GPIOF_JOY_DOWN) | \
- PIN_ODR_HIGH(GPIOF_PIN3) | \
- PIN_ODR_HIGH(GPIOF_JOY_LEFT) | \
- PIN_ODR_HIGH(GPIOF_PIN5) | \
- PIN_ODR_HIGH(GPIOF_PIN6) | \
- PIN_ODR_HIGH(GPIOF_PIN7) | \
- PIN_ODR_HIGH(GPIOF_PIN8) | \
- PIN_ODR_HIGH(GPIOF_JOY_RIGHT) | \
- PIN_ODR_HIGH(GPIOF_JOY_UP) | \
- PIN_ODR_HIGH(GPIOF_PIN11) | \
- PIN_ODR_HIGH(GPIOF_PIN12) | \
- PIN_ODR_HIGH(GPIOF_PIN13) | \
- PIN_ODR_HIGH(GPIOF_PIN14) | \
- PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0) | \
- PIN_AFIO_AF(GPIOF_OSC_OUT, 0) | \
- PIN_AFIO_AF(GPIOF_JOY_DOWN, 0) | \
- PIN_AFIO_AF(GPIOF_PIN3, 0) | \
- PIN_AFIO_AF(GPIOF_JOY_LEFT, 0) | \
- PIN_AFIO_AF(GPIOF_PIN5, 0) | \
- PIN_AFIO_AF(GPIOF_PIN6, 0) | \
- PIN_AFIO_AF(GPIOF_PIN7, 0))
-#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \
- PIN_AFIO_AF(GPIOF_JOY_RIGHT, 0) | \
- PIN_AFIO_AF(GPIOF_JOY_UP, 0) | \
- PIN_AFIO_AF(GPIOF_PIN11, 0) | \
- PIN_AFIO_AF(GPIOF_PIN12, 0) | \
- PIN_AFIO_AF(GPIOF_PIN13, 0) | \
- PIN_AFIO_AF(GPIOF_PIN14, 0) | \
- PIN_AFIO_AF(GPIOF_PIN15, 0))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/boards/ST_STM32373C_EVAL/board.mk b/boards/ST_STM32373C_EVAL/board.mk deleted file mode 100644 index 98a37d006..000000000 --- a/boards/ST_STM32373C_EVAL/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files.
-BOARDSRC = ${CHIBIOS}/boards/ST_STM32373C_EVAL/board.c
-
-# Required include directories
-BOARDINC = ${CHIBIOS}/boards/ST_STM32373C_EVAL
diff --git a/boards/ST_STM32373C_EVAL/cfg/board.chcfg b/boards/ST_STM32373C_EVAL/cfg/board.chcfg deleted file mode 100644 index 85f428ef8..000000000 --- a/boards/ST_STM32373C_EVAL/cfg/board.chcfg +++ /dev/null @@ -1,798 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<!-- STM32F3xx board Template -->
-<board
- xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
- xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f3xx_board.xsd">
- <configuration_settings>
- <templates_path>resources/gencfg/processors/boards/stm32f3xx/templates</templates_path>
- <output_path>..</output_path>
- </configuration_settings>
- <board_name>STMicroelectronics STM32373C-EVAL</board_name>
- <board_id>ST_STM32373C_EVAL</board_id>
- <board_functions></board_functions>
- <subtype>STM32F37X</subtype>
- <clocks HSEFrequency="8000000" HSEBypass="false" LSEFrequency="32768"
- LSEBypass="false" LSEDrive="3 High Drive (default)" />
- <ports>
- <GPIOA>
- <pin0
- ID="WKUP_BUTTON"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID="LDR_OUT"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Analog"
- Alternate="0" />
- <pin2
- ID="KEY_BUTTON"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin2>
- <pin3
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin4
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="5" ></pin5>
- <pin6
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID="COMP2_OUT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="Low"
- Mode="Output"
- Alternate="0" />
- <pin8
- ID="I2C2_SMB"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID="I2C2_SCL"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="4" />
- <pin10
- ID="I2C2_SDA"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="4" ></pin10>
- <pin11
- ID="USB_DM"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="14" />
- <pin12
- ID="USB_DP"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="14" ></pin12>
- <pin13
- ID="SWDIO"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullUp"
- Level="High"
- Mode="Alternate"
- Alternate="0" />
- <pin14
- ID="SWCLK"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullDown"
- Level="High"
- Mode="Alternate"
- Alternate="0" />
- <pin15
- ID="JTDI"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="0" />
- </GPIOA>
- <GPIOB>
- <pin0
- ID="MIC_IN"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Analog"
- Alternate="0" />
- <pin1
- ID="ADC_POT_IN"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Analog"
- Alternate="0" />
- <pin2
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID="SWO"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="0" />
- <pin4
- ID="JTRST"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin5>
- <pin6
- ID="I2C1_SCL"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="4" />
- <pin7
- ID="I2C1_SDA"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="4" />
- <pin8
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- </GPIOB>
- <GPIOC>
- <pin0
- ID="LED1"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" />
- <pin1
- ID="LED2"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" />
- <pin2
- ID="LED3"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" />
- <pin3
- ID="LED4"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" ></pin3>
- <pin4
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID="USB_DISCONNECT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID="SPI3_SCK"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="6" />
- <pin11
- ID="SPI3_MISO"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullUp"
- Level="High"
- Mode="Alternate"
- Alternate="6" />
- <pin12
- ID="SPI3_MOSI"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="6" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID="OSC32_IN"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID="OSC32_OUT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- </GPIOC>
- <GPIOD>
- <pin0
- ID="CAN_RX"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="7" />
- <pin1
- ID="CAN_TX"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="7" />
- <pin2
- ID="LCD_CS"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" />
- <pin3
- ID="USART2_CTS"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="7" ></pin3>
- <pin4
- ID="USART2_RST"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="7" />
- <pin5
- ID="USART2_TX"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="7" />
- <pin6
- ID="USART2_RX"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Alternate"
- Alternate="7" />
- <pin7
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID="AUDIO_RST"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="Low"
- Mode="Output"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- </GPIOD>
- <GPIOE>
- <pin0
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin2
- ID="SD_CS"
- Type="OpenDrain"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Output"
- Alternate="0" ></pin2>
- <pin3
- ID="SD_DETECT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin3>
- <pin4
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin5>
- <pin6
- ID="JOY_SEL"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullDown"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID="RTD_IN"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="High"
- Mode="Analog"
- Alternate="0" />
- <pin8
- ID="PRESSUREP"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Analog"
- Alternate="0" />
- <pin9
- ID="PRESSUREN"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Analog"
- Alternate="0" />
- <pin10
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin10>
- <pin11
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="Low"
- Mode="Input"
- Alternate="0" ></pin13>
- <pin14
- ID="PRESSURE_TEPM"
- Type="PushPull"
- Speed="Minimum"
- Resistor="Floating"
- Level="Low"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="Low"
- Mode="Input"
- Alternate="0" />
- </GPIOE>
- <GPIOF>
- <pin0
- ID="OSC_IN"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin1
- ID="OSC_OUT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="Floating"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin1>
- <pin2
- ID="JOY_DOWN"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullDown"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin3
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" ></pin3>
- <pin4
- ID="JOY_LEFT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullDown"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin5
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin6
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin7
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin8
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin9
- ID="JOY_RIGHT"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullDown"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin10
- ID="JOY_UP"
- Type="PushPull"
- Speed="Maximum"
- Resistor="PullDown"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin11
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin12
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin13
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin14
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- <pin15
- ID=""
- Type="PushPull"
- Speed="Minimum"
- Resistor="PullUp"
- Level="High"
- Mode="Input"
- Alternate="0" />
- </GPIOF>
- </ports>
-</board>
|