diff options
Diffstat (limited to 'boards/ST_STM8L_DISCOVERY/board.h')
| -rw-r--r-- | boards/ST_STM8L_DISCOVERY/board.h | 167 |
1 files changed, 0 insertions, 167 deletions
diff --git a/boards/ST_STM8L_DISCOVERY/board.h b/boards/ST_STM8L_DISCOVERY/board.h deleted file mode 100644 index 907279ee7..000000000 --- a/boards/ST_STM8L_DISCOVERY/board.h +++ /dev/null @@ -1,167 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for STMicroelectronics STM8L-Discovery board.
- */
-
-/*
- * Board identifiers.
- */
-#define BOARD_ST_STM8L_DISCOVERY
-#define BOARD_NAME "ST STM8L-Discovery"
-
-/*
- * Board frequencies and bypass modes.
- *
- * The bypass must be set to TRUE if the chip is driven by an external
- * oscillator rather than a crystal. Frequency must be set to zero if
- * the clock source is not used at all.
- * The following constants are used by the HAL low level driver for
- * correct clock initialization.
- */
-#define HSECLK 0
-#define HSEBYPASS FALSE
-#define LSECLK 32768
-#define LSEBYPASS FALSE
-
-/*
- * MCU model used on the board.
- */
-#define STM8L152C6
-#define STM8L15X_MD
-
-/*
- * Pin definitions.
- */
-#define PA_OSC_IN 2
-#define PA_OSC_OUT 3
-#define PA_LCD_COM0 4
-#define PA_LCD_COM1 5
-#define PA_LCD_COM2 6
-#define PA_LCD_SEG0 7
-
-#define PB_LCD_SEG10 0
-#define PB_LCD_SEG11 1
-#define PB_LCD_SEG12 2
-#define PB_LCD_SEG13 3
-#define PB_LCD_SEG14 4
-#define PB_LCD_SEG15 5
-#define PB_LCD_SEG16 6
-#define PB_LCD_SEG17 7
-
-#define PC_UNUSED 0
-#define PC_BUTTON 1
-#define PC_LCD_SEG22 2
-#define PC_LCD_SEG23 3
-#define PC_IDD_CNT_EN 4
-#define PC_LED4 7
-
-#define PD_LCD_SEG7 0
-#define PD_LCD_COM3 1
-#define PD_LCD_SEG8 2
-#define PD_LCD_SEG9 3
-#define PD_LCD_SEG18 4
-#define PD_LCD_SEG19 5
-#define PD_LCD_SEG20 6
-#define PD_LCD_SEG21 7
-
-#define PE_LCD_SEG1 0
-#define PE_LCD_SEG2 1
-#define PE_LCD_SEG3 2
-#define PE_LCD_SEG4 3
-#define PE_LCD_SEG5 4
-#define PE_LCD_SEG6 5
-#define PE_IDD_WAKEUP 6
-#define PE_LED3 7
-
-#define PF0_IDD_MEASUREMENT 0
-
-/*
- * Port A initial setup.
- */
-#define VAL_GPIOAODR 0
-#define VAL_GPIOADDR 0 /* All inputs. */
-#define VAL_GPIOACR1 0xFF /* All pull-up/push-pull. */
-#define VAL_GPIOACR2 0
-
-/*
- * Port B initial setup.
- */
-#define VAL_GPIOBODR 0
-#define VAL_GPIOBDDR 0 /* All inputs. */
-#define VAL_GPIOBCR1 0xFF /* All pull-up/push-pull. */
-#define VAL_GPIOBCR2 0
-
-/*
- * Port C initial setup.
- */
-#define VAL_GPIOCODR 0
-#define VAL_GPIOCDDR (1 << PC_LED4)
-#define VAL_GPIOCCR1 0xFF /* All pull-up/push-pull. */
-#define VAL_GPIOCCR2 0
-
-/*
- * Port D initial setup.
- */
-#define VAL_GPIODODR 0
-#define VAL_GPIODDDR 0 /* All inputs. */
-#define VAL_GPIODCR1 0xFF /* All pull-up/push-pull. */
-#define VAL_GPIODCR2 0
-
-/*
- * Port E initial setup.
- */
-#define VAL_GPIOEODR 0
-#define VAL_GPIOEDDR (1 << PE_LED3)
-#define VAL_GPIOECR1 0xFF /* All pull-up/push-pull. */
-#define VAL_GPIOECR2 0
-
-/*
- * Port F initial setup.
- */
-#define VAL_GPIOFODR 0
-#define VAL_GPIOFDDR 0 /* All inputs. */
-#define VAL_GPIOFCR1 0xFF /* All pull-up/push-pull. */
-#define VAL_GPIOFCR2 0
-
-/*
- * TIM2-update ISR segment code. This code is injected into the appropriate
- * ISR by the HAL.
- */
-#define _TIM2_UPDATE_ISR() { \
- if (TIM2->SR1 & TIM_SR1_UIF) { \
- chSysLockFromIsr(); \
- chSysTimerHandlerI(); \
- chSysUnlockFromIsr(); \
- TIM2->SR1 = 0; \
- } \
-}
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
|