diff options
Diffstat (limited to 'demos/STM32/RT-STM32F429-DISCOVERY/usbcfg.c')
| -rw-r--r-- | demos/STM32/RT-STM32F429-DISCOVERY/usbcfg.c | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/demos/STM32/RT-STM32F429-DISCOVERY/usbcfg.c b/demos/STM32/RT-STM32F429-DISCOVERY/usbcfg.c index 07a492758..d541a9ee6 100644 --- a/demos/STM32/RT-STM32F429-DISCOVERY/usbcfg.c +++ b/demos/STM32/RT-STM32F429-DISCOVERY/usbcfg.c @@ -20,11 +20,11 @@ SerialUSBDriver SDU1;
/*
- * Endpoints to be used for USBD1.
+ * Endpoints to be used for USBD2.
*/
-#define USBD1_DATA_REQUEST_EP 1
-#define USBD1_DATA_AVAILABLE_EP 1
-#define USBD1_INTERRUPT_REQUEST_EP 2
+#define USBD2_DATA_REQUEST_EP 1
+#define USBD2_DATA_AVAILABLE_EP 1
+#define USBD2_INTERRUPT_REQUEST_EP 2
/*
* USB Device Descriptor.
@@ -102,7 +102,7 @@ static const uint8_t vcom_configuration_descriptor_data[67] = { USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class
Interface). */
/* Endpoint 2 Descriptor.*/
- USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80,
+ USB_DESC_ENDPOINT (USBD2_INTERRUPT_REQUEST_EP|0x80,
0x03, /* bmAttributes (Interrupt). */
0x0008, /* wMaxPacketSize. */
0xFF), /* bInterval. */
@@ -118,12 +118,12 @@ static const uint8_t vcom_configuration_descriptor_data[67] = { 4.7). */
0x00), /* iInterface. */
/* Endpoint 3 Descriptor.*/
- USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/
+ USB_DESC_ENDPOINT (USBD2_DATA_AVAILABLE_EP, /* bEndpointAddress.*/
0x02, /* bmAttributes (Bulk). */
0x0040, /* wMaxPacketSize. */
0x00), /* bInterval. */
/* Endpoint 1 Descriptor.*/
- USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/
+ USB_DESC_ENDPOINT (USBD2_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/
0x02, /* bmAttributes (Bulk). */
0x0040, /* wMaxPacketSize. */
0x00) /* bInterval. */
@@ -277,8 +277,8 @@ static void usb_event(USBDriver *usbp, usbevent_t event) { /* Enables the endpoints specified into the configuration.
Note, this callback is invoked from an ISR so I-Class functions
must be used.*/
- usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config);
- usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config);
+ usbInitEndpointI(usbp, USBD2_DATA_REQUEST_EP, &ep1config);
+ usbInitEndpointI(usbp, USBD2_INTERRUPT_REQUEST_EP, &ep2config);
/* Resetting the state of the CDC subsystem.*/
sduConfigureHookI(&SDU1);
@@ -327,8 +327,8 @@ const USBConfig usbcfg = { * Serial over USB driver configuration.
*/
const SerialUSBConfig serusbcfg = {
- &USBD1,
- USBD1_DATA_REQUEST_EP,
- USBD1_DATA_AVAILABLE_EP,
- USBD1_INTERRUPT_REQUEST_EP
+ &USBD2,
+ USBD2_DATA_REQUEST_EP,
+ USBD2_DATA_AVAILABLE_EP,
+ USBD2_INTERRUPT_REQUEST_EP
};
|