aboutsummaryrefslogtreecommitdiffstats
path: root/os
diff options
context:
space:
mode:
Diffstat (limited to 'os')
-rw-r--r--os/hal/include/i2c.h201
-rw-r--r--os/hal/include/i2c_albi.h185
-rw-r--r--os/hal/include/i2c_brts.h248
-rw-r--r--os/hal/platforms/STM32/i2c_lld.c645
-rw-r--r--os/hal/platforms/STM32/i2c_lld.h236
-rw-r--r--os/hal/platforms/STM32/i2c_lld_albi.c574
-rw-r--r--os/hal/platforms/STM32/i2c_lld_albi.h263
-rw-r--r--os/hal/platforms/STM32/i2c_lld_brts.c626
-rw-r--r--os/hal/platforms/STM32/i2c_lld_btrts.h201
-rw-r--r--os/hal/platforms/STM32/platform.mk4
-rw-r--r--os/hal/src/i2c.c226
-rw-r--r--os/hal/src/i2c_albi.c268
-rw-r--r--os/hal/src/i2c_brts.c249
13 files changed, 3795 insertions, 131 deletions
diff --git a/os/hal/include/i2c.h b/os/hal/include/i2c.h
index 5f8c971fd..f5465985b 100644
--- a/os/hal/include/i2c.h
+++ b/os/hal/include/i2c.h
@@ -34,7 +34,24 @@
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
-
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+#define I2CD_NO_ERROR 0
+/** @brief Bus Error.*/
+#define I2CD_BUS_ERROR 0x01
+/** @brief Arbitration Lost (master mode).*/
+#define I2CD_ARBITRATION_LOST 0x02
+/** @brief Acknowledge Failure.*/
+#define I2CD_ACK_FAILURE 0x04
+/** @brief Overrun/Underrun.*/
+#define I2CD_OVERRUN 0x08
+/** @brief PEC Error in reception.*/
+#define I2CD_PEC_ERROR 0x10
+/** @brief Timeout or Tlow Error.*/
+#define I2CD_TIMEOUT 0x20
+/** @brief SMBus Alert.*/
+#define I2CD_SMB_ALERT 0x40
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
@@ -49,6 +66,9 @@
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
+#if I2C_USE_MUTUAL_EXCLUSION && !CH_USE_MUTEXES && !CH_USE_SEMAPHORES
+#error "I2C_USE_MUTUAL_EXCLUSION requires CH_USE_MUTEXES and/or CH_USE_SEMAPHORES"
+#endif
/*===========================================================================*/
/* Driver data structures and types. */
@@ -58,78 +78,175 @@
* @brief Driver state machine possible states.
*/
typedef enum {
- I2C_UNINIT = 0, /**< Not initialized. */
- I2C_STOP = 1, /**< Stopped. */
- I2C_READY = 2, /**< Ready. */
- I2C_MREADY = 3, /**< START and address sent. */
- I2C_MTRANSMIT = 4, /**< Master transmitting. */
- I2C_MRECEIVE = 5, /**< Master receiving. */
- I2C_MERROR = 6 /**< Error condition. */
+ I2C_UNINIT = 0, /**< @brief Not initialized. */
+ I2C_STOP = 1, /**< @brief Stopped. */
+ I2C_READY = 2, /**< @brief Ready. */
+ I2C_ACTIVE = 3, /**< @brief In communication. */
+ I2C_COMPLETE = 4, /**< @brief Asynchronous operation complete. */
+
+ // slave part
+ I2C_SACTIVE = 10,
+ I2C_STRANSMIT = 11,
+ I2C_SRECEIVE = 12,
} i2cstate_t;
+
#include "i2c_lld.h"
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
+/**
+ * @brief I2C notification callback type.
+ * @details This callback invoked when byte transfer finish event occurs,
+ * No matter sending or reading. This function designed
+ * for sending (re)start or stop events to I2C bus from user level.
+ *
+ * If callback function is set to NULL - driver atomaticcaly
+ * generate stop condition after the transfer finish.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object triggering the
+ * callback
+ * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object triggering the
+ * callback
+ */
+typedef void (*i2ccallback_t)(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+
/**
- * @brief Read mode.
+ * @brief I2C error notification callback type.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object triggering the
+ * callback
+ * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object triggering the
+ * callback
*/
-#define I2C_READ 1
+typedef void (*i2cerrorcallback_t)(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+
/**
- * @brief Write mode.
+ * @brief I2C transmission data block size.
*/
-#define I2C_WRITE 0
+typedef uint8_t i2cblock_t;
+
/**
- * @brief Seven bits addresses header builder.
+ * @brief Structure representing an I2C slave configuration.
+ * @details Each slave device has its own config structure with input and
+ * output buffers for temporally storing data.
+ */
+struct I2CSlaveConfig{
+ /**
+ * @brief Callback pointer.
+ * @note Transfer finished callback. Invoke when all data transferred, or
+ * by DMA buffer events
+ * If set to @p NULL then the callback is disabled.
+ */
+ i2ccallback_t id_callback;
+
+ /**
+ * @brief Callback pointer.
+ * @note This callback will be invoked when error condition occur.
+ * If set to @p NULL then the callback is disabled.
+ */
+ i2cerrorcallback_t id_err_callback;
+
+ /**
+ * @brief Receive and transmit buffers.
+ */
+ size_t txbytes;
+ size_t rxbytes;
+ i2cblock_t *rxbuf; /*!< Pointer to receive buffer. */
+ i2cblock_t *txbuf; /*!< Pointer to transmit buffer.*/
+ uint16_t slave_addr;
+ uint8_t nbit_address; /*!< Length of address (must be 7 or 10).*/
+ i2cflags_t errors;
+ i2cflags_t flags;
+ /* Status Change @p EventSource.*/
+ EventSource sevent;
+};
+
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+#if I2C_USE_WAIT || defined(__DOXYGEN__)
+/**
+ * @brief Waits for operation completion.
+ * @details This function waits for the driver to complete the current
+ * operation.
+ * @pre An operation must be running while the function is invoked.
+ * @note No more than one thread can wait on a I2C driver using
+ * this function.
*
- * @param[in] addr seven bits address value
- * @param[in] rw read/write flag
+ * @param[in] i2cp pointer to the @p I2CDriver object
*
- * @return A 16 bit value representing the header, the most
- * significant byte is always zero.
+ * @notapi
*/
-#define I2C_ADDR7(addr, rw) (uint16_t)((addr) << 1 | (rw))
+#define _i2c_wait_s(i2cp) { \
+ chDbgAssert((i2cp)->thread == NULL, \
+ "_i2c_wait(), #1", "already waiting"); \
+ (i2cp)->thread = chThdSelf(); \
+ chSchGoSleepS(THD_STATE_SUSPENDED); \
+}
+/**
+ * @brief Wakes up the waiting thread.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#define _i2c_wakeup_isr(i2cp) { \
+ if ((i2cp)->thread != NULL) { \
+ Thread *tp = (i2cp)->thread; \
+ (i2cp)->thread = NULL; \
+ chSysLockFromIsr(); \
+ chSchReadyI(tp); \
+ chSysUnlockFromIsr(); \
+ } \
+}
+#else /* !I2C_USE_WAIT */
+#define _i2c_wait_s(i2cp)
+#define _i2c_wakeup_isr(i2cp)
+#endif /* !I2C_USE_WAIT */
/**
- * @brief Ten bits addresses header builder.
+ * @brief Common ISR code.
+ * @details This code handles the portable part of the ISR code:
+ * - Callback invocation.
+ * - Waiting thread wakeup, if any.
+ * - Driver state transitions.
+ * .
+ * @note This macro is meant to be used in the low level drivers
+ * implementation only.
*
- * @param[in] addr ten bits address value
- * @param[in] rw read/write flag
+ * @param[in] i2cp pointer to the @p I2CDriver object
*
- * @return A 16 bit value representing the header, the most
- * significant byte is the first one to be transmitted.
+ * @notapi
*/
-#define I2C_ADDR10(addr, rw) \
- (uint16_t)(0xF000 | \
- (((addr) & 0x0300) << 1) | \
- (((rw) << 8)) | \
- ((addr) & 0x00FF))
+#define _i2c_isr_code(i2cp, i2cscfg) { \
+ (i2cp)->id_state = I2C_COMPLETE; \
+ if(((i2cp)->id_slave_config)->id_callback) { \
+ ((i2cp)->id_slave_config)->id_callback(i2cp, i2cscfg); \
+ } \
+ _i2c_wakeup_isr(i2cp); \
+}
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
-
#ifdef __cplusplus
extern "C" {
#endif
void i2cInit(void);
void i2cObjectInit(I2CDriver *i2cp);
- void i2cStart(I2CDriver *i2cp, const I2CConfig *config);
+ void i2cStart(I2CDriver *i2cp, I2CConfig *config);
void i2cStop(I2CDriver *i2cp);
- void i2cMasterStartI(I2CDriver *i2cp,
- uint16_t header,
- i2ccallback_t callback);
- void i2cMasterStopI(I2CDriver *i2cp, i2ccallback_t callback);
- void i2cMasterRestartI(I2CDriver *i2cp, i2ccallback_t callback);
- void i2cMasterTransmitI(I2CDriver *i2cp, size_t n, const uint8_t *txbuf,
- i2ccallback_t callback);
- void i2cMasterReceiveI(I2CDriver *i2cp, size_t n, uint8_t *rxbuf,
- i2ccallback_t callback);
+ void i2cMasterTransmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+ void i2cMasterReceive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+ void i2cMasterStart(I2CDriver *i2cp);
+ void i2cMasterStop(I2CDriver *i2cp);
+ void i2cAddFlagsI(I2CDriver *i2cp, i2cflags_t mask);
+
#if I2C_USE_MUTUAL_EXCLUSION
void i2cAcquireBus(I2CDriver *i2cp);
void i2cReleaseBus(I2CDriver *i2cp);
diff --git a/os/hal/include/i2c_albi.h b/os/hal/include/i2c_albi.h
new file mode 100644
index 000000000..30ec38548
--- /dev/null
+++ b/os/hal/include/i2c_albi.h
@@ -0,0 +1,185 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file i2c.h
+ * @brief I2C Driver macros and structures.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#ifndef I2C_H_
+#define I2C_H_
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+#define I2CD_NO_ERROR 0
+/** @brief Bus Error.*/
+#define I2CD_BUS_ERROR 0x01
+/** @brief Arbitration Lost (master mode).*/
+#define I2CD_ARBITRATION_LOST 0x02
+/** @brief Acknowledge Failure.*/
+#define I2CD_ACK_FAILURE 0x04
+/** @brief Overrun/Underrun.*/
+#define I2CD_OVERRUN 0x08
+/** @brief PEC Error in reception.*/
+#define I2CD_PEC_ERROR 0x10
+/** @brief Timeout or Tlow Error.*/
+#define I2CD_TIMEOUT 0x20
+/** @brief SMBus Alert.*/
+#define I2CD_SMB_ALERT 0x40
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(I2C_USE_WAIT) || defined(__DOXYGEN__)
+#define I2C_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if I2C_USE_MUTUAL_EXCLUSION && !CH_USE_MUTEXES && !CH_USE_SEMAPHORES
+#error "I2C_USE_MUTUAL_EXCLUSION requires CH_USE_MUTEXES and/or CH_USE_SEMAPHORES"
+#endif
+
+/**
+ * @brief Driver state machine possible states.
+ */
+typedef enum {
+ I2C_UNINIT = 0, /**< @brief Not initialized. */
+ I2C_STOP = 1, /**< @brief Stopped. */
+ I2C_READY = 2, /**< @brief Ready. */
+ I2C_ACTIVE = 3, /**< @brief In communication. */
+ I2C_COMPLETE = 4 /**< @brief Asynchronous operation complete. */
+} i2cstate_t;
+
+#include "i2c_lld.h"
+
+#if I2C_USE_WAIT || defined(__DOXYGEN__)
+/**
+ * @brief Waits for operation completion.
+ * @details This function waits for the driver to complete the current
+ * operation.
+ * @pre An operation must be running while the function is invoked.
+ * @note No more than one thread can wait on a I2C driver using
+ * this function.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#define _i2c_wait_s(i2cp) { \
+ chDbgAssert((i2cp)->thread == NULL, \
+ "_i2c_wait(), #1", "already waiting"); \
+ (i2cp)->thread = chThdSelf(); \
+ chSchGoSleepS(THD_STATE_SUSPENDED); \
+}
+
+/**
+ * @brief Wakes up the waiting thread.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#define _i2c_wakeup_isr(i2cp) { \
+ if ((i2cp)->thread != NULL) { \
+ Thread *tp = (i2cp)->thread; \
+ (i2cp)->thread = NULL; \
+ chSysLockFromIsr(); \
+ chSchReadyI(tp); \
+ chSysUnlockFromIsr(); \
+ } \
+}
+#else /* !I2C_USE_WAIT */
+#define _i2c_wait_s(i2cp)
+#define _i2c_wakeup_isr(i2cp)
+#endif /* !I2C_USE_WAIT */
+
+/**
+ * @brief Common ISR code.
+ * @details This code handles the portable part of the ISR code:
+ * - Callback invocation.
+ * - Waiting thread wakeup, if any.
+ * - Driver state transitions.
+ * .
+ * @note This macro is meant to be used in the low level drivers
+ * implementation only.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#define _i2c_isr_code(i2cp) { \
+ (i2cp)->state = I2C_COMPLETE; \
+ if((i2cp)->endcb) { \
+ (i2cp)->endcb(i2cp); \
+ } \
+ _i2c_wakeup_isr(i2cp); \
+}
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void i2cInit(void);
+ void i2cObjectInit(I2CDriver *i2cp);
+ void i2cStart(I2CDriver *i2cp, const I2CConfig *config);
+ void i2cStop(I2CDriver *i2cp);
+ void i2cMasterTransmit(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *txbuf);
+ void i2cMasterReceive(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *rxbuf);
+ void i2cAddFlagsI(I2CDriver *i2cp, i2cflags_t mask);
+ i2cflags_t i2cGetAndClearFlags(I2CDriver *i2cp);
+ uint16_t i2cSMBusAlertResponse(I2CDriver *i2cp);
+
+#if I2C_USE_MUTUAL_EXCLUSION
+ void i2cAcquireBus(I2CDriver *i2cp);
+ void i2cReleaseBus(I2CDriver *i2cp);
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* CH_HAL_USE_I2C */
+
+#endif /* I2C_H_ */
diff --git a/os/hal/include/i2c_brts.h b/os/hal/include/i2c_brts.h
new file mode 100644
index 000000000..a01606a18
--- /dev/null
+++ b/os/hal/include/i2c_brts.h
@@ -0,0 +1,248 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file i2c.h
+ * @brief I2C Driver macros and structures.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#ifndef _I2C_H_
+#define _I2C_H_
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Driver state machine possible states.
+ */
+typedef enum {
+ I2C_UNINIT = 0, /**< Not initialized. */
+ I2C_STOP = 1, /**< Stopped. */
+ I2C_READY = 2, /**< Ready. Start condition generated. */
+ I2C_MACTIVE = 3, /**< I2C configured and waiting start cond. */
+ I2C_10BIT_HANDSHAKE = 4, /**< 10-bit address sending */
+ I2C_MWAIT_ADDR_ACK = 5, /**< Waiting ACK on address sending. */
+ I2C_MTRANSMIT = 6, /**< Master transmitting. */
+ I2C_MRECEIVE = 7, /**< Master receiving. */
+ I2C_MWAIT_TF = 8, /**< Master wait Transmission Finished */
+ I2C_MERROR = 9, /**< Error condition. */
+
+ // slave part
+ I2C_SACTIVE = 10,
+ I2C_STRANSMIT = 11,
+ I2C_SRECEIVE = 12,
+} i2cstate_t;
+
+
+#include "i2c_lld.h"
+
+/**
+ * @brief I2C notification callback type.
+ * @details This callback invoked when byte transfer finish event occurs,
+ * No matter sending or reading. This function designed
+ * for sending (re)start or stop events to I2C bus from user level.
+ *
+ * If callback function is set to NULL - driver atomaticcaly
+ * generate stop condition after the transfer finish.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object triggering the
+ * callback
+ * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object triggering the
+ * callback
+ */
+typedef void (*i2ccallback_t)(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+
+
+/**
+ * @brief I2C error notification callback type.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object triggering the
+ * callback
+ * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object triggering the
+ * callback
+ */
+typedef void (*i2cerrorcallback_t)(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+
+
+/**
+ * @brief I2C transmission data block size.
+ */
+typedef uint8_t i2cblock_t;
+
+
+/**
+ * @brief Structure representing an I2C slave configuration.
+ * @details Each slave device has its own config structure with input and
+ * output buffers for temporally storing data.
+ */
+struct I2CSlaveConfig{
+ /**
+ * @brief Callback pointer.
+ * @note Transfer finished callback. Invoke when all data transferred, or
+ * by DMA buffer events
+ * If set to @p NULL then the callback is disabled.
+ */
+ i2ccallback_t id_callback;
+
+ /**
+ * @brief Callback pointer.
+ * @note This callback will be invoked when error condition occur.
+ * If set to @p NULL then the callback is disabled.
+ */
+ i2cerrorcallback_t id_err_callback;
+
+ /**
+ * @brief Receive and transmit buffers.
+ */
+ i2cblock_t *rxbuf; /*!< Pointer to receive buffer. */
+ size_t rxdepth; /*!< Depth of buffer. */
+ size_t rxbytes; /*!< Number of bytes to be receive in one transmission. */
+ size_t rxbufhead; /*!< Pointer to current data byte. */
+
+ i2cblock_t *txbuf; /*!< Pointer to transmit buffer.*/
+ size_t txdepth; /*!< Depth of buffer. */
+ size_t txbytes; /*!< Number of bytes to be transmit in one transmission. */
+ size_t txbufhead; /*!< Pointer to current data byte. */
+
+ /**
+ * @brief Contain slave address and some flags.
+ * @details Bits 0..9 contain slave address in 10-bit mode.
+ *
+ * Bits 0..6 contain slave address in 7-bit mode.
+ *
+ * Bits 10..14 are not used in 10-bit mode.
+ * Bits 7..14 are not used in 7-bit mode.
+ *
+ * Bit 15 is used to switch between 10-bit and 7-bit modes
+ * (0 denotes 7-bit mode).
+ */
+ uint16_t address;
+
+ /**
+ * @brief Boolean flag for dealing with start/stop conditions.
+ * @note This flag destined to use in callback functions. It place here
+ * for convenience and flexibility reasons, but you can use your
+ * own variable from user level code.
+ */
+ bool_t restart;
+
+
+#if I2C_USE_WAIT
+ /**
+ * @brief Thread waiting for I/O completion.
+ */
+ Thread *thread;
+#endif /* I2C_USE_WAIT */
+};
+
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Read mode.
+ */
+#define I2C_READ 1
+
+/**
+ * @brief Write mode.
+ */
+#define I2C_WRITE 0
+
+/**
+ * @brief Seven bits addresses header builder.
+ *
+ * @param[in] addr seven bits address value
+ * @param[in] rw read/write flag
+ *
+ * @return A 16 bit value representing the header, the most
+ * significant byte is always zero.
+ */
+#define I2C_ADDR7(addr, rw) (uint16_t)((addr) << 1 | (rw))
+
+
+/**
+ * @brief Ten bits addresses header builder.
+ *
+ * @param[in] addr ten bits address value
+ * @param[in] rw read/write flag
+ *
+ * @return A 16 bit value representing the header, the most
+ * significant byte is the first one to be transmitted.
+ */
+#define I2C_ADDR10(addr, rw) \
+ (uint16_t)(0xF000 | \
+ (((addr) & 0x0300) << 1) | \
+ (((rw) << 8)) | \
+ ((addr) & 0x00FF))
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void i2cInit(void);
+ void i2cObjectInit(I2CDriver *i2cp);
+ void i2cStart(I2CDriver *i2cp, I2CConfig *config);
+ void i2cStop(I2CDriver *i2cp);
+ void i2cMasterTransmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+ void i2cMasterReceive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+ void i2cMasterStart(I2CDriver *i2cp);
+ void i2cMasterStop(I2CDriver *i2cp);
+
+#if I2C_USE_MUTUAL_EXCLUSION
+ void i2cAcquireBus(I2CDriver *i2cp);
+ void i2cReleaseBus(I2CDriver *i2cp);
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_I2C */
+
+#endif /* _I2C_H_ */
+
+/** @} */
diff --git a/os/hal/platforms/STM32/i2c_lld.c b/os/hal/platforms/STM32/i2c_lld.c
new file mode 100644
index 000000000..2c535b930
--- /dev/null
+++ b/os/hal/platforms/STM32/i2c_lld.c
@@ -0,0 +1,645 @@
+/**
+ * @file STM32/i2c_lld.c
+ * @brief STM32 I2C subsystem low level driver source. Slave mode not implemented.
+ * @addtogroup STM32_I2C
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+#include "i2c_lld.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief I2C1 driver identifier.*/
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+I2CDriver I2CD1;
+#endif
+
+/** @brief I2C2 driver identifier.*/
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+I2CDriver I2CD2;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+
+static uint32_t i2c_get_event(I2CDriver *i2cp){
+ uint32_t regSR1 = i2cp->id_i2c->SR1;
+ uint32_t regSR2 = i2cp->id_i2c->SR2;
+ /* return the last event value from I2C status registers */
+ return (I2C_EV_MASK & (regSR1 | (regSR2 << 16)));
+}
+
+static void i2c_serve_event_interrupt(I2CDriver *i2cp) {
+ static __IO uint8_t *txBuffp, *rxBuffp, *datap;
+
+ I2C_TypeDef *dp = i2cp->id_i2c;
+
+ switch(i2c_get_event(i2cp)) {
+ case I2C_EV5_MASTER_MODE_SELECT:
+ i2cp->id_slave_config->flags &= ~I2C_FLG_HEADER_SENT;
+ dp->DR = i2cp->slave_addr1;
+ break;
+ case I2C_EV9_MASTER_ADDR_10BIT:
+ if(i2cp->id_slave_config->flags & I2C_FLG_MASTER_RECEIVER) {
+ i2cp->slave_addr1 |= 0x01;
+ i2cp->id_slave_config->flags |= I2C_FLG_HEADER_SENT;
+// i2cp->id_i2c->CR1 = (i2cp->id_i2c->CR1 & (~I2C_CR1_ACK)) | I2C_CR1_STOP;
+ }
+ dp->DR = i2cp->slave_addr2;
+ break;
+
+
+ //------------------------------------------------------------------------
+ // Master Transmitter ----------------------------------------------------
+ //------------------------------------------------------------------------
+ case I2C_EV6_MASTER_TRA_MODE_SELECTED:
+ if(i2cp->id_slave_config->flags & I2C_FLG_HEADER_SENT){
+ dp->CR1 |= I2C_CR1_START; // re-send the start in 10-Bit address mode
+ break;
+ }
+ //Initialize the transmit buffer pointer
+ txBuffp = (uint8_t*)i2cp->id_slave_config->txbuf;
+ datap = txBuffp;
+ txBuffp++;
+ i2cp->id_slave_config->txbytes--;
+ /* If no further data to be sent, disable the I2C ITBUF in order to not have a TxE interrupt */
+ if(i2cp->id_slave_config->txbytes == 0) {
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+ }
+ //EV8_1 write the first data
+ dp->DR = *datap;
+ break;
+ case I2C_EV8_MASTER_BYTE_TRANSMITTING:
+ if(i2cp->id_slave_config->txbytes > 0) {
+ datap = txBuffp;
+ txBuffp++;
+ i2cp->id_slave_config->txbytes--;
+ if(i2cp->id_slave_config->txbytes == 0) {
+ /* If no further data to be sent, disable the ITBUF in order to not have a TxE interrupt */
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+ }
+ dp->DR = *datap;
+ }
+ break;
+ case I2C_EV8_2_MASTER_BYTE_TRANSMITTED:
+ /* if nothing to read then generate stop */
+ if (i2cp->id_slave_config->rxbytes == 0){
+ dp->CR1 |= I2C_CR1_STOP; // stop generation
+ /* Disable ITEVT In order to not have again a BTF IT */
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN;
+ /* Portable I2C ISR code defined in the high level driver, note, it is a macro.*/
+ _i2c_isr_code(i2cp, i2cp->id_slave_config);
+ }
+ else{
+ /* Disable ITEVT In order to not have again a BTF IT */
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN;
+ /* send restart and begin reading operations */
+ i2c_lld_master_transceive(i2cp);
+ }
+ break;
+
+
+ //------------------------------------------------------------------------
+ // Master Receiver -------------------------------------------------------
+ //------------------------------------------------------------------------
+ case I2C_EV6_MASTER_REC_MODE_SELECTED:
+ chSysLockFromIsr();
+ switch(i2cp->id_slave_config->flags & EV6_SUBEV_MASK) {
+ case I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED: // only an single byte to receive
+ /* Clear ACK */
+ dp->CR1 &= (uint16_t)~I2C_CR1_ACK;
+ /* Program the STOP */
+ dp->CR1 |= I2C_CR1_STOP;
+ break;
+ case I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED: // only two bytes to receive
+ /* Clear ACK */
+ dp->CR1 &= (uint16_t)~I2C_CR1_ACK;
+ /* Disable the ITBUF in order to have only the BTF interrupt */
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+ break;
+ }
+ chSysUnlockFromIsr();
+ /* Initialize receive buffer pointer */
+ rxBuffp = i2cp->id_slave_config->rxbuf;
+ break;
+ case I2C_EV7_MASTER_REC_BYTE_RECEIVED:
+ if(i2cp->id_slave_config->rxbytes != 3) {
+ /* Read the data register */
+ *rxBuffp = dp->DR;
+ rxBuffp++;
+ i2cp->id_slave_config->rxbytes--;
+ switch(i2cp->id_slave_config->rxbytes){
+ case 3:
+ /* Disable the ITBUF in order to have only the BTF interrupt */
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+ i2cp->id_slave_config->flags |= I2C_FLG_3BTR;
+ break;
+ case 0:
+ /* Portable I2C ISR code defined in the high level driver, note, it is a macro.*/
+ _i2c_isr_code(i2cp, i2cp->id_slave_config);
+ break;
+ }
+ }
+ // when remaining 3 bytes do nothing, wait until RXNE and BTF are set (until 2 bytes are received)
+ break;
+ case I2C_EV7_MASTER_REC_BYTE_QUEUED:
+ switch(i2cp->id_slave_config->flags & EV7_SUBEV_MASK) {
+ case I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS:
+ // DataN-2 and DataN-1 are received
+ chSysLockFromIsr();
+ dp->CR2 |= I2C_CR2_ITBUFEN;
+ /* Clear ACK */
+ dp->CR1 &= (uint16_t)~I2C_CR1_ACK;
+ /* Read the DataN-2*/
+ *rxBuffp = dp->DR; //This clear the RXE & BFT flags and launch the DataN reception in the shift register (ending the SCL stretch)
+ rxBuffp++;
+ /* Program the STOP */
+ dp->CR1 |= I2C_CR1_STOP;
+ /* Read the DataN-1 */
+ *rxBuffp = dp->DR;
+ chSysUnlockFromIsr();
+ rxBuffp++;
+ /* Decrement the number of readed bytes */
+ i2cp->id_slave_config->rxbytes -= 2;
+ i2cp->id_slave_config->flags = 0;
+ // ready for read DataN on the next EV7
+ break;
+ case I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS: // only for case of two bytes to be received
+ // DataN-1 and DataN are received
+ chSysLockFromIsr();
+ /* Program the STOP */
+ dp->CR1 |= I2C_CR1_STOP;
+ /* Read the DataN-1*/
+ *rxBuffp = dp->DR;
+ chSysUnlockFromIsr();
+ rxBuffp++;
+ /* Read the DataN*/
+ *rxBuffp = dp->DR;
+ i2cp->id_slave_config->rxbytes = 0;
+ i2cp->id_slave_config->flags = 0;
+ /* Portable I2C ISR code defined in the high level driver, note, it is a macro.*/
+ _i2c_isr_code(i2cp, i2cp->id_slave_config);
+ break;
+ }
+ break;
+ }
+}
+
+static void i2c_serve_error_interrupt(I2CDriver *i2cp) {
+ i2cflags_t flags;
+ I2C_TypeDef *reg;
+
+ reg = i2cp->id_i2c;
+ flags = I2CD_NO_ERROR;
+
+ if(reg->SR1 & I2C_SR1_BERR) { // Bus error
+ reg->SR1 &= ~I2C_SR1_BERR;
+ flags |= I2CD_BUS_ERROR;
+ }
+ if(reg->SR1 & I2C_SR1_ARLO) { // Arbitration lost
+ reg->SR1 &= ~I2C_SR1_ARLO;
+ flags |= I2CD_ARBITRATION_LOST;
+ }
+ if(reg->SR1 & I2C_SR1_AF) { // Acknowledge fail
+ reg->SR1 &= ~I2C_SR1_AF;
+ reg->CR1 |= I2C_CR1_STOP; // setting stop bit
+ flags |= I2CD_ACK_FAILURE;
+ }
+ if(reg->SR1 & I2C_SR1_OVR) { // Overrun
+ reg->SR1 &= ~I2C_SR1_OVR;
+ flags |= I2CD_OVERRUN;
+ }
+ if(reg->SR1 & I2C_SR1_PECERR) { // PEC error
+ reg->SR1 &= ~I2C_SR1_PECERR;
+ flags |= I2CD_PEC_ERROR;
+ }
+ if(reg->SR1 & I2C_SR1_TIMEOUT) { // SMBus Timeout
+ reg->SR1 &= ~I2C_SR1_TIMEOUT;
+ flags |= I2CD_TIMEOUT;
+ }
+ if(reg->SR1 & I2C_SR1_SMBALERT) { // SMBus alert
+ reg->SR1 &= ~I2C_SR1_SMBALERT;
+ flags |= I2CD_SMB_ALERT;
+ }
+
+ if(flags != I2CD_NO_ERROR) {
+ // send communication end signal
+ _i2c_isr_code(i2cp, i2cp->id_slave_config);
+ chSysLockFromIsr();
+ i2cAddFlagsI(i2cp, flags);
+ chSysUnlockFromIsr();
+ }
+}
+
+
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+/**
+ * @brief I2C1 event interrupt handler.
+ */
+CH_IRQ_HANDLER(VectorBC) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_event_interrupt(&I2CD1);
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C1 error interrupt handler.
+ */
+CH_IRQ_HANDLER(VectorC0) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_error_interrupt(&I2CD1);
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+/**
+ * @brief I2C2 event interrupt handler.
+ */
+CH_IRQ_HANDLER(VectorC4) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_event_interrupt(&I2CD2);
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C2 error interrupt handler.
+ */
+CH_IRQ_HANDLER(VectorC8) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_error_interrupt(&I2CD2);
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+/**
+ * @brief Low level I2C driver initialization.
+ */
+void i2c_lld_init(void) {
+
+#if STM32_I2C_USE_I2C1
+ RCC->APB1RSTR = RCC_APB1RSTR_I2C1RST; // reset I2C 1
+ RCC->APB1RSTR = 0;
+ i2cObjectInit(&I2CD1);
+ I2CD1.id_i2c = I2C1;
+#endif
+
+#if STM32_I2C_USE_I2C2
+ RCC->APB1RSTR = RCC_APB1RSTR_I2C2RST; // reset I2C 2
+ RCC->APB1RSTR = 0;
+ i2cObjectInit(&I2CD2);
+ I2CD2.id_i2c = I2C2;
+#endif
+}
+
+/**
+ * @brief Configures and activates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_start(I2CDriver *i2cp) {
+
+ /* If in stopped state then enables the I2C clock.*/
+ if (i2cp->id_state == I2C_STOP) {
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ NVICEnableVector(I2C1_EV_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY);
+ NVICEnableVector(I2C1_ER_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY);
+ RCC->APB1ENR |= RCC_APB1ENR_I2C1EN; // I2C 1 clock enable
+ }
+#endif
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ NVICEnableVector(I2C2_EV_IRQn, STM32_I2C_I2C2_IRQ_PRIORITY);
+ NVICEnableVector(I2C2_ER_IRQn, STM32_I2C_I2C2_IRQ_PRIORITY);
+ RCC->APB1ENR |= RCC_APB1ENR_I2C2EN; // I2C 2 clock enable
+ }
+#endif
+ }
+
+ /* I2C setup.*/
+ i2cp->id_i2c->CR1 = I2C_CR1_SWRST; // reset i2c peripherial
+ i2cp->id_i2c->CR1 = 0;
+
+ i2c_lld_set_clock(i2cp);
+ i2c_lld_set_opmode(i2cp);
+ i2cp->id_i2c->CR2 |= I2C_CR2_ITERREN | I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN;// enable interrupts
+ i2cp->id_i2c->CR1 |= 1; // enable interface
+}
+
+void i2c_lld_reset(I2CDriver *i2cp){
+ chDbgCheck((i2cp->id_state == I2C_STOP)||(i2cp->id_state == I2C_READY),
+ "i2c_lld_reset: invalid state");
+
+ RCC->APB1RSTR = RCC_APB1RSTR_I2C1RST; // reset I2C 1
+ RCC->APB1RSTR = 0;
+}
+
+
+/**
+ * @brief Set clock speed.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_set_clock(I2CDriver *i2cp) {
+ volatile uint16_t regCCR, regCR2, freq, clock_div;
+ volatile uint16_t pe_bit_saved;
+ int32_t clock_speed = i2cp->id_config->ClockSpeed;
+ I2C_DutyCycle_t duty = i2cp->id_config->FastModeDutyCycle;
+
+ chDbgCheck((i2cp != NULL) && (clock_speed > 0) && (clock_speed <= 4000000),
+ "i2c_lld_set_clock");
+
+ /*---------------------------- CR2 Configuration ------------------------*/
+ /* Get the I2Cx CR2 value */
+ regCR2 = i2cp->id_i2c->CR2;
+
+ /* Clear frequency FREQ[5:0] bits */
+ regCR2 &= (uint16_t)~I2C_CR2_FREQ;
+ /* Set frequency bits depending on pclk1 value */
+ freq = (uint16_t)(STM32_PCLK1 / 1000000);
+ chDbgCheck((freq >= 2) && (freq <= 36),
+ "i2c_lld_set_clock() : Peripheral clock freq. out of range");
+ regCR2 |= freq;
+ i2cp->id_i2c->CR2 = regCR2;
+
+ /*---------------------------- CCR Configuration ------------------------*/
+ pe_bit_saved = (i2cp->id_i2c->CR1 & I2C_CR1_PE);
+ /* Disable the selected I2C peripheral to configure TRISE */
+ i2cp->id_i2c->CR1 &= (uint16_t)~I2C_CR1_PE;
+
+ /* Clear F/S, DUTY and CCR[11:0] bits */
+ regCCR = 0;
+ clock_div = I2C_CCR_CCR;
+ /* Configure clock_div in standard mode */
+ if (clock_speed <= 100000) {
+ chDbgAssert(duty == stdDutyCycle,
+ "i2c_lld_set_clock(), #1", "Invalid standard mode duty cycle");
+ /* Standard mode clock_div calculate: Tlow/Thigh = 1/1 */
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 2));
+ /* Test if CCR value is under 0x4, and set the minimum allowed value */
+ if (clock_div < 0x04) clock_div = 0x04;
+ /* Set clock_div value for standard mode */
+ regCCR |= (clock_div & I2C_CCR_CCR);
+ /* Set Maximum Rise Time for standard mode */
+ i2cp->id_i2c->TRISE = freq + 1;
+ }
+ /* Configure clock_div in fast mode */
+ else if(clock_speed <= 400000) {
+ chDbgAssert((duty == fastDutyCycle_2) || (duty == fastDutyCycle_16_9),
+ "i2c_lld_set_clock(), #2", "Invalid fast mode duty cycle");
+ if(duty == fastDutyCycle_2) {
+ /* Fast mode clock_div calculate: Tlow/Thigh = 2/1 */
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 3));
+ }
+ else if(duty == fastDutyCycle_16_9) {
+ /* Fast mode clock_div calculate: Tlow/Thigh = 16/9 */
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 25));
+ /* Set DUTY bit */
+ regCCR |= I2C_CCR_DUTY;
+ }
+ /* Test if CCR value is under 0x1, and set the minimum allowed value */
+ if(clock_div < 0x01) clock_div = 0x01;
+ /* Set clock_div value and F/S bit for fast mode*/
+ regCCR |= (I2C_CCR_FS | (clock_div & I2C_CCR_CCR));
+ /* Set Maximum Rise Time for fast mode */
+ i2cp->id_i2c->TRISE = (freq * 300 / 1000) + 1;
+ }
+ chDbgAssert((clock_div <= I2C_CCR_CCR),
+ "i2c_lld_set_clock(), #3", "Too low clock clock speed selected");
+
+ /* Write to I2Cx CCR */
+ i2cp->id_i2c->CCR = regCCR;
+
+ /* restore the I2C peripheral enabled state */
+ i2cp->id_i2c->CR1 |= pe_bit_saved;
+}
+
+/**
+ * @brief Set operation mode of I2C hardware.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_set_opmode(I2CDriver *i2cp) {
+ I2C_opMode_t opmode = i2cp->id_config->opMode;
+ uint16_t regCR1;
+
+ /*---------------------------- CR1 Configuration ------------------------*/
+ /* Get the I2Cx CR1 value */
+ regCR1 = i2cp->id_i2c->CR1;
+ switch(opmode){
+ case opmodeI2C:
+ regCR1 &= (uint16_t)~(I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+ break;
+ case opmodeSMBusDevice:
+ regCR1 |= I2C_CR1_SMBUS;
+ regCR1 &= (uint16_t)~(I2C_CR1_SMBTYPE);
+ break;
+ case opmodeSMBusHost:
+ regCR1 |= (I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+ break;
+ }
+ /* Write to I2Cx CR1 */
+ i2cp->id_i2c->CR1 = regCR1;
+}
+
+/**
+ * @brief Set own address.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_set_own_address(I2CDriver *i2cp) {
+ //TODO: dual address mode
+
+ /*---------------------------- OAR1 Configuration -----------------------*/
+ i2cp->id_i2c->OAR1 |= 1 << 14;
+
+ if (&(i2cp->id_config->OwnAddress10) == NULL){// only 7-bit address
+ i2cp->id_i2c->OAR1 &= (~I2C_OAR1_ADDMODE);
+ i2cp->id_i2c->OAR1 |= i2cp->id_config->OwnAddress7 << 1;
+ }
+ else {
+ chDbgAssert((i2cp->id_config->OwnAddress10 < 1024),
+ "i2c_lld_set_own_address(), #1", "10-bit address longer then 10 bit")
+ i2cp->id_i2c->OAR1 |= I2C_OAR1_ADDMODE;
+ i2cp->id_i2c->OAR1 |= i2cp->id_config->OwnAddress10;
+ }
+}
+
+
+/**
+ * @brief Deactivates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_stop(I2CDriver *i2cp) {
+
+ /* If in ready state then disables the I2C clock.*/
+ if (i2cp->id_state == I2C_READY) {
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ NVICDisableVector(I2C1_EV_IRQn);
+ NVICDisableVector(I2C1_ER_IRQn);
+ RCC->APB1ENR &= ~RCC_APB1ENR_I2C1EN;
+ }
+#endif
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ NVICDisableVector(I2C2_EV_IRQn);
+ NVICDisableVector(I2C2_ER_IRQn);
+ RCC->APB1ENR &= ~RCC_APB1ENR_I2C2EN;
+ }
+#endif
+ }
+ i2cp->id_state = I2C_STOP;
+}
+
+/**
+ * @brief Transmits data ever the I2C bus as master.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ */
+void i2c_lld_master_transmit(I2CDriver *i2cp) {
+
+ // enable ERR, EVT & BUF ITs
+ i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN);
+ i2cp->id_i2c->CR1 &= ~I2C_CR1_POS;
+
+ switch(i2cp->id_slave_config->nbit_address){
+ case 7:
+ i2cp->slave_addr1 = ((i2cp->id_slave_config->slave_addr <<1) & 0x00FE); // LSB = 0 -> write
+ break;
+ case 10:
+ i2cp->slave_addr1 = ((i2cp->id_slave_config->slave_addr >>7) & 0x0006); // add the two msb of 10-bit address to the header
+ i2cp->slave_addr1 |= 0xF0; // add the header bits with LSB = 0 -> write
+ i2cp->slave_addr2 = i2cp->id_slave_config->slave_addr & 0x00FF; // the remaining 8 bit of 10-bit address
+ break;
+ }
+
+ i2cp->id_slave_config->flags = 0;
+ i2cp->id_slave_config->errors = 0;
+
+ i2cp->id_i2c->CR1 |= I2C_CR1_START; // send start bit
+
+#if !I2C_USE_WAIT
+ /* Wait until the START condition is generated on the bus: the START bit is cleared by hardware */
+ uint32_t timeout = 0xfffff;
+ while((i2cp->id_i2c->CR1 & I2C_CR1_START) && timeout--)
+ ;
+#endif /* I2C_USE_WAIT */
+}
+
+
+/**
+ * @brief Receives data from the I2C bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ */
+void i2c_lld_master_receive(I2CDriver *i2cp){
+ // enable ERR, EVT & BUF ITs
+ i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN);
+ i2cp->id_i2c->CR1 |= I2C_CR1_ACK; // acknowledge returned
+ i2cp->id_i2c->CR1 &= ~I2C_CR1_POS;
+
+ switch(i2cp->id_slave_config->nbit_address){
+ case 7:
+ i2cp->slave_addr1 = ((i2cp->id_slave_config->slave_addr <<1) | 0x01); // LSB = 1 -> receive
+ break;
+ case 10:
+ i2cp->slave_addr1 = ((i2cp->id_slave_config->slave_addr >>7) & 0x0006); // add the two msb of 10-bit address to the header
+ i2cp->slave_addr1 |= 0xF0; // add the header bits (the LSB -> 1 will be add to second
+ i2cp->slave_addr2 = i2cp->id_slave_config->slave_addr & 0x00FF; // the remaining 8 bit of 10-bit address
+ break;
+ }
+
+ i2cp->id_slave_config->flags = I2C_FLG_MASTER_RECEIVER;
+ i2cp->id_slave_config->errors = 0;
+
+ // Only one byte to be received
+ if(i2cp->id_slave_config->rxbytes == 1) {
+ i2cp->id_slave_config->flags |= I2C_FLG_1BTR;
+ }
+ // Only two bytes to be received
+ else if(i2cp->id_slave_config->rxbytes == 2) {
+ i2cp->id_slave_config->flags |= I2C_FLG_2BTR;
+ i2cp->id_i2c->CR1 |= I2C_CR1_POS; // Acknowledge Position
+ }
+
+ i2cp->id_i2c->CR1 |= I2C_CR1_START; // send start bit
+
+#if !I2C_USE_WAIT
+ /* Wait until the START condition is generated on the bus: the START bit is cleared by hardware */
+ uint32_t timeout = 0xfffff;
+ while((i2cp->id_i2c->CR1 & I2C_CR1_START) && timeout--)
+ ;
+#endif /* I2C_USE_WAIT */
+}
+
+
+
+/**
+ * @brief
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ */
+void i2c_lld_master_transceive(I2CDriver *i2cp){
+ // enable ERR, EVT & BUF ITs
+ i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN);
+ i2cp->id_i2c->CR1 |= I2C_CR1_ACK; // acknowledge returned
+ i2cp->id_i2c->CR1 &= ~I2C_CR1_POS;
+
+ switch(i2cp->id_slave_config->nbit_address){
+ case 7:
+ i2cp->slave_addr1 = ((i2cp->id_slave_config->slave_addr <<1) | 0x01); // LSB = 1 -> receive
+ break;
+ case 10:
+ i2cp->slave_addr1 = ((i2cp->id_slave_config->slave_addr >>7) & 0x0006); // add the two msb of 10-bit address to the header
+ i2cp->slave_addr1 |= 0xF0; // add the header bits (the LSB -> 1 will be add to second
+ i2cp->slave_addr2 = i2cp->id_slave_config->slave_addr & 0x00FF; // the remaining 8 bit of 10-bit address
+ break;
+ }
+
+ i2cp->id_slave_config->flags = I2C_FLG_MASTER_RECEIVER;
+ i2cp->id_slave_config->errors = 0;
+
+ // Only one byte to be received
+ if(i2cp->id_slave_config->rxbytes == 1) {
+ i2cp->id_slave_config->flags |= I2C_FLG_1BTR;
+ }
+ // Only two bytes to be received
+ else if(i2cp->id_slave_config->rxbytes == 2) {
+ i2cp->id_slave_config->flags |= I2C_FLG_2BTR;
+ i2cp->id_i2c->CR1 |= I2C_CR1_POS; // Acknowledge Position
+ }
+
+ i2cp->id_i2c->CR1 |= I2C_CR1_START; // send start bit
+
+#if !I2C_USE_WAIT
+ /* Wait until the START condition is generated on the bus: the START bit is cleared by hardware */
+ uint32_t timeout = 0xfffff;
+ while((i2cp->id_i2c->CR1 & I2C_CR1_START) && timeout--)
+ ;
+#endif /* I2C_USE_WAIT */
+}
+
+
+#endif // HAL_USE_I2C
diff --git a/os/hal/platforms/STM32/i2c_lld.h b/os/hal/platforms/STM32/i2c_lld.h
new file mode 100644
index 000000000..00c6410fa
--- /dev/null
+++ b/os/hal/platforms/STM32/i2c_lld.h
@@ -0,0 +1,236 @@
+/**
+ * @file STM32/i2c_lld.h
+ * @brief STM32 I2C subsystem low level driver header.
+ * @addtogroup STM32_I2C
+ * @{
+ */
+
+#ifndef _I2C_LLD_H_
+#define _I2C_LLD_H_
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief I2C1 driver enable switch.
+ * @details If set to @p TRUE the support for I2C1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C1 TRUE
+#endif
+
+/**
+ * @brief I2C2 driver enable switch.
+ * @details If set to @p TRUE the support for I2C2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C2 TRUE
+#endif
+
+/**
+ * @brief I2C1 interrupt priority level setting.
+ * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C1_IRQ_PRIORITY > @p PRIORITY_PENDSV.
+ */
+#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 0xA0
+#endif
+
+/**
+ * @brief I2C2 interrupt priority level setting.
+ * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C2_IRQ_PRIORITY > @p PRIORITY_PENDSV.
+ */
+#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_IRQ_PRIORITY 0xA0
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/** @brief EV5 */
+#define I2C_EV5_MASTER_MODE_SELECT ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_SB)) /* BUSY, MSL and SB flag */
+/** @brief EV6 */
+#define I2C_EV6_MASTER_TRA_MODE_SELECTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_ADDR|I2C_SR1_TXE)) /* BUSY, MSL, ADDR, TXE and TRA flags */
+#define I2C_EV6_MASTER_REC_MODE_SELECTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_ADDR)) /* BUSY, MSL and ADDR flags */
+/** @brief EV7 */
+#define I2C_EV7_MASTER_REC_BYTE_RECEIVED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_RXNE)) /* BUSY, MSL and RXNE flags */
+#define I2C_EV7_MASTER_REC_BYTE_QUEUED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_BTF|I2C_SR1_RXNE)) /* BUSY, MSL, RXNE and BTF flags*/
+/** @brief EV8 */
+#define I2C_EV8_MASTER_BYTE_TRANSMITTING ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_TXE)) /* TRA, BUSY, MSL, TXE flags */
+/** @brief EV8_2 */
+#define I2C_EV8_2_MASTER_BYTE_TRANSMITTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_BTF|I2C_SR1_TXE)) /* TRA, BUSY, MSL, TXE and BTF flags */
+/** @brief EV9 */
+#define I2C_EV9_MASTER_ADDR_10BIT ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_ADD10)) /* BUSY, MSL and ADD10 flags */
+#define I2C_EV_MASK 0x00FFFFFF
+
+#define I2C_FLG_1BTR 0x01 // Single byte to be received and processed
+#define I2C_FLG_2BTR 0x02 // Two bytes to be received and processed
+#define I2C_FLG_3BTR 0x04 // Last three received bytes to be processed
+#define I2C_FLG_MASTER_RECEIVER 0x10
+#define I2C_FLG_HEADER_SENT 0x80
+
+#define EV6_SUBEV_MASK (I2C_FLG_1BTR|I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER)
+#define EV7_SUBEV_MASK (I2C_FLG_2BTR|I2C_FLG_3BTR|I2C_FLG_MASTER_RECEIVER)
+
+#define I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED (I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER)
+#define I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED (I2C_FLG_1BTR|I2C_FLG_MASTER_RECEIVER)
+#define I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS (I2C_FLG_3BTR|I2C_FLG_MASTER_RECEIVER)
+#define I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS (I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER)
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial Driver condition flags type.
+ */
+typedef uint32_t i2cflags_t;
+
+typedef enum {
+ opmodeI2C,
+ opmodeSMBusDevice,
+ opmodeSMBusHost,
+} I2C_opMode_t;
+
+typedef enum {
+ stdDutyCycle,
+ fastDutyCycle_2,
+ fastDutyCycle_16_9,
+} I2C_DutyCycle_t;
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ I2C_opMode_t opMode; /*!< Specifies the I2C mode.*/
+ uint32_t ClockSpeed; /*!< Specifies the clock frequency. Must be set to a value lower than 400kHz */
+ I2C_DutyCycle_t FastModeDutyCycle;/*!< Specifies the I2C fast mode duty cycle */
+ uint8_t OwnAddress7; /*!< Specifies the first device 7-bit own address. */
+ uint16_t OwnAddress10; /*!< Specifies the second part of device own address in 10-bit mode. Set to NULL if not used. */
+ uint16_t Ack; /*!< Enables or disables the acknowledgement. */
+ uint8_t nBitAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged */
+} I2CConfig;
+
+
+/**
+ * @brief Type of a structure representing an I2C driver.
+ */
+typedef struct I2CDriver I2CDriver;
+
+/**
+ * @brief Type of a structure representing an I2C slave config.
+ */
+typedef struct I2CSlaveConfig I2CSlaveConfig;
+
+/**
+ * @brief Structure representing an I2C driver.
+ */
+struct I2CDriver{
+ /**
+ * @brief Driver state.
+ */
+ i2cstate_t id_state;
+#if I2C_USE_WAIT
+ /**
+ * @brief Thread waiting for I/O completion.
+ */
+ Thread *thread;
+#endif /* I2C_USE_WAIT */
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+#if CH_USE_MUTEXES || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the bus.
+ */
+ Mutex id_mutex;
+#elif CH_USE_SEMAPHORES
+ Semaphore id_semaphore;
+#endif
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+ /**
+ * @brief Current configuration data.
+ */
+ I2CConfig *id_config;
+ /**
+ * @brief Current slave configuration data.
+ */
+ I2CSlaveConfig *id_slave_config;
+ /**
+ * @brief RW-bit sent to slave.
+ */
+ uint8_t rw_bit;
+
+ uint8_t slave_addr1; // 7-bit address of the slave
+ uint8_t slave_addr2; // used in 10-bit address mode
+ uint8_t nbit_address;
+
+
+ /*********** End of the mandatory fields. **********************************/
+
+ /**
+ * @brief Pointer to the I2Cx registers block.
+ */
+ I2C_TypeDef *id_i2c;
+} ;
+
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+#define i2c_lld_bus_is_busy(i2cp) \
+ (i2cp->id_i2c->SR2 & I2C_SR2_BUSY)
+
+
+/* Wait until BUSY flag is reset: a STOP has been generated on the bus
+ * signaling the end of transmission
+ */
+#define i2c_lld_wait_bus_free(i2cp) { \
+ uint32_t tmo = 0xffff; \
+ while((i2cp->id_i2c->SR2 & I2C_SR2_BUSY) && tmo--) \
+ ; \
+}
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+/** @cond never*/
+#if STM32_I2C_USE_I2C1
+extern I2CDriver I2CD1;
+#endif
+
+#if STM32_I2C_USE_I2C2
+extern I2CDriver I2CD2;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void i2c_lld_init(void);
+void i2c_lld_reset(I2CDriver *i2cp);
+void i2c_lld_set_clock(I2CDriver *i2cp);
+void i2c_lld_set_opmode(I2CDriver *i2cp);
+void i2c_lld_set_own_address(I2CDriver *i2cp);
+void i2c_lld_start(I2CDriver *i2cp);
+void i2c_lld_stop(I2CDriver *i2cp);
+void i2c_lld_master_transmit(I2CDriver *i2cp);
+void i2c_lld_master_receive(I2CDriver *i2cp);
+void i2c_lld_master_transceive(I2CDriver *i2cp);
+
+#ifdef __cplusplus
+}
+#endif
+/** @endcond*/
+
+#endif // CH_HAL_USE_I2C
+
+#endif // _I2C_LLD_H_
diff --git a/os/hal/platforms/STM32/i2c_lld_albi.c b/os/hal/platforms/STM32/i2c_lld_albi.c
new file mode 100644
index 000000000..cd6a851db
--- /dev/null
+++ b/os/hal/platforms/STM32/i2c_lld_albi.c
@@ -0,0 +1,574 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32/i2c_lld.c
+ * @brief STM32 I2C subsystem low level driver source. Slave mode not implemented.
+ * @addtogroup STM32_I2C
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief I2C1 driver identifier.*/
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+I2CDriver I2CD1;
+#endif
+
+/** @brief I2C2 driver identifier.*/
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+I2CDriver I2CD2;
+#endif
+
+
+static uint32_t i2c_get_event(I2CDriver *i2cp){
+ uint32_t regSR1 = i2cp->i2c_register->SR1;
+ uint32_t regSR2 = i2cp->i2c_register->SR2;
+ /* return the last event value from I2C status registers */
+ return (I2C_EV_MASK & (regSR1 | (regSR2 << 16)));
+}
+
+static void i2c_serve_event_interrupt(I2CDriver *i2cp) {
+ static __IO uint8_t *txBuffp, *rxBuffp, *datap;
+
+ I2C_TypeDef *dp = i2cp->i2c_register;
+
+ switch(i2c_get_event(i2cp)) {
+ case I2C_EV5_MASTER_MODE_SELECT:
+ i2cp->flags &= ~I2C_FLG_HEADER_SENT;
+ dp->DR = i2cp->slave_addr1;
+ break;
+ case I2C_EV9_MASTER_ADDR_10BIT:
+ if(i2cp->flags & I2C_FLG_MASTER_RECEIVER) {
+ i2cp->slave_addr1 |= 0x01;
+ i2cp->flags |= I2C_FLG_HEADER_SENT;
+ }
+ dp->DR = i2cp->slave_addr2;
+ break;
+ //------------------------------------------------------------------------
+ // Master Transmitter ----------------------------------------------------
+ //------------------------------------------------------------------------
+ case I2C_EV6_MASTER_TRA_MODE_SELECTED:
+ if(i2cp->flags & I2C_FLG_HEADER_SENT){
+ dp->CR1 |= I2C_CR1_START; // re-send the start in 10-Bit address mode
+ break;
+ }
+ //Initialize the transmit buffer pointer
+ txBuffp = (uint8_t*)i2cp->txbuf;
+ datap = txBuffp;
+ txBuffp++;
+ i2cp->remaining_bytes--;
+ /* If no further data to be sent, disable the I2C ITBUF in order to not have a TxE interrupt */
+ if(i2cp->remaining_bytes == 0) {
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+ }
+ //EV8_1 write the first data
+ dp->DR = *datap;
+ break;
+ case I2C_EV8_MASTER_BYTE_TRANSMITTING:
+ if(i2cp->remaining_bytes > 0) {
+ datap = txBuffp;
+ txBuffp++;
+ i2cp->remaining_bytes--;
+ if(i2cp->remaining_bytes == 0) {
+ /* If no further data to be sent, disable the ITBUF in order to not have a TxE interrupt */
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+ }
+ dp->DR = *datap;
+ }
+ break;
+ case I2C_EV8_2_MASTER_BYTE_TRANSMITTED:
+ dp->CR1 |= I2C_CR1_STOP; // stop generation
+ /* Disable ITEVT In order to not have again a BTF IT */
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN;
+ /* Portable I2C ISR code defined in the high level driver, note, it is a macro.*/
+ _i2c_isr_code(i2cp);
+ break;
+ //------------------------------------------------------------------------
+ // Master Receiver -------------------------------------------------------
+ //------------------------------------------------------------------------
+ case I2C_EV6_MASTER_REC_MODE_SELECTED:
+ chSysLockFromIsr();
+ switch(i2cp->flags & EV6_SUBEV_MASK) {
+ case I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED: // only an single byte to receive
+ /* Clear ACK */
+ dp->CR1 &= (uint16_t)~I2C_CR1_ACK;
+ /* Program the STOP */
+ dp->CR1 |= I2C_CR1_STOP;
+ break;
+ case I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED: // only two bytes to receive
+ /* Clear ACK */
+ dp->CR1 &= (uint16_t)~I2C_CR1_ACK;
+ /* Disable the ITBUF in order to have only the BTF interrupt */
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+ break;
+ }
+ chSysUnlockFromIsr();
+ /* Initialize receive buffer pointer */
+ rxBuffp = i2cp->rxbuf;
+ break;
+ case I2C_EV7_MASTER_REC_BYTE_RECEIVED:
+ if(i2cp->remaining_bytes != 3) {
+ /* Read the data register */
+ *rxBuffp = dp->DR;
+ rxBuffp++;
+ i2cp->remaining_bytes--;
+ switch(i2cp->remaining_bytes){
+ case 3:
+ /* Disable the ITBUF in order to have only the BTF interrupt */
+ dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN;
+ i2cp->flags |= I2C_FLG_3BTR;
+ break;
+ case 0:
+ /* Portable I2C ISR code defined in the high level driver, note, it is a macro.*/
+ _i2c_isr_code(i2cp);
+ break;
+ }
+ }
+ // when remaining 3 bytes do nothing, wait until RXNE and BTF are set (until 2 bytes are received)
+ break;
+ case I2C_EV7_MASTER_REC_BYTE_QUEUED:
+ switch(i2cp->flags & EV7_SUBEV_MASK) {
+ case I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS:
+ // DataN-2 and DataN-1 are received
+ chSysLockFromIsr();
+ dp->CR2 |= I2C_CR2_ITBUFEN;
+ /* Clear ACK */
+ dp->CR1 &= (uint16_t)~I2C_CR1_ACK;
+ /* Read the DataN-2*/
+ *rxBuffp = dp->DR; //This clear the RXE & BFT flags and launch the DataN reception in the shift register (ending the SCL stretch)
+ rxBuffp++;
+ /* Program the STOP */
+ dp->CR1 |= I2C_CR1_STOP;
+ /* Read the DataN-1 */
+ *rxBuffp = dp->DR;
+ chSysUnlockFromIsr();
+ rxBuffp++;
+ /* Decrement the number of readed bytes */
+ i2cp->remaining_bytes -= 2;
+ i2cp->flags = 0;
+ // ready for read DataN on the next EV7
+ break;
+ case I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS: // only for case of two bytes to be received
+ // DataN-1 and DataN are received
+ chSysLockFromIsr();
+ /* Program the STOP */
+ dp->CR1 |= I2C_CR1_STOP;
+ /* Read the DataN-1*/
+ *rxBuffp = dp->DR;
+ chSysUnlockFromIsr();
+ rxBuffp++;
+ /* Read the DataN*/
+ *rxBuffp = dp->DR;
+ i2cp->remaining_bytes = 0;
+ i2cp->flags = 0;
+ /* Portable I2C ISR code defined in the high level driver, note, it is a macro.*/
+ _i2c_isr_code(i2cp);
+ break;
+ }
+ break;
+ }
+}
+
+static void i2c_serve_error_interrupt(I2CDriver *i2cp) {
+ i2cflags_t flags;
+ I2C_TypeDef *reg;
+
+ reg = i2cp->i2c_register;
+ flags = I2CD_NO_ERROR;
+
+ if(reg->SR1 & I2C_SR1_BERR) { // Bus error
+ reg->SR1 &= ~I2C_SR1_BERR;
+ flags |= I2CD_BUS_ERROR;
+ }
+ if(reg->SR1 & I2C_SR1_ARLO) { // Arbitration lost
+ reg->SR1 &= ~I2C_SR1_ARLO;
+ flags |= I2CD_ARBITRATION_LOST;
+ }
+ if(reg->SR1 & I2C_SR1_AF) { // Acknowledge fail
+ reg->SR1 &= ~I2C_SR1_AF;
+ reg->CR1 |= I2C_CR1_STOP; // setting stop bit
+ flags |= I2CD_ACK_FAILURE;
+ }
+ if(reg->SR1 & I2C_SR1_OVR) { // Overrun
+ reg->SR1 &= ~I2C_SR1_OVR;
+ flags |= I2CD_OVERRUN;
+ }
+ if(reg->SR1 & I2C_SR1_PECERR) { // PEC error
+ reg->SR1 &= ~I2C_SR1_PECERR;
+ flags |= I2CD_PEC_ERROR;
+ }
+ if(reg->SR1 & I2C_SR1_TIMEOUT) { // SMBus Timeout
+ reg->SR1 &= ~I2C_SR1_TIMEOUT;
+ flags |= I2CD_TIMEOUT;
+ }
+ if(reg->SR1 & I2C_SR1_SMBALERT) { // SMBus alert
+ reg->SR1 &= ~I2C_SR1_SMBALERT;
+ flags |= I2CD_SMB_ALERT;
+ }
+
+ if(flags != I2CD_NO_ERROR) {
+ // send communication end signal
+ _i2c_isr_code(i2cp);
+ chSysLockFromIsr();
+ i2cAddFlagsI(i2cp, flags);
+ chSysUnlockFromIsr();
+ }
+}
+
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+/**
+ * @brief I2C1 event interrupt handler.
+ */
+CH_IRQ_HANDLER(I2C1_EV_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_event_interrupt(&I2CD1);
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C1 error interrupt handler.
+ */
+CH_IRQ_HANDLER(I2C1_ER_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_error_interrupt(&I2CD1);
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+/**
+ * @brief I2C2 event interrupt handler.
+ */
+CH_IRQ_HANDLER(I2C2_EV_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_event_interrupt(&I2CD2);
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C2 error interrupt handler.
+ */
+CH_IRQ_HANDLER(I2C2_ER_IRQHandler) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_error_interrupt(&I2CD2);
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+void i2c_lld_reset(I2CDriver *i2cp){
+ chDbgCheck((i2cp->state == I2C_STOP)||(i2cp->state == I2C_READY),
+ "i2c_lld_reset: invalid state");
+
+ RCC->APB1RSTR = RCC_APB1RSTR_I2C1RST; // reset I2C 1
+ RCC->APB1RSTR = 0;
+}
+
+void i2c_lld_set_clock(I2CDriver *i2cp, int32_t clock_speed, I2C_DutyCycle_t duty) {
+ volatile uint16_t regCCR, regCR2, freq, clock_div;
+ volatile uint16_t pe_bit_saved;
+
+ chDbgCheck((i2cp != NULL) && (clock_speed > 0) && (clock_speed <= 4000000),
+ "i2c_lld_set_clock");
+
+ /*---------------------------- CR2 Configuration ------------------------*/
+ /* Get the I2Cx CR2 value */
+ regCR2 = i2cp->i2c_register->CR2;
+ /* Clear frequency FREQ[5:0] bits */
+ regCR2 &= (uint16_t)~I2C_CR2_FREQ;
+ /* Set frequency bits depending on pclk1 value */
+ freq = (uint16_t)(STM32_PCLK1 / 1000000);
+ chDbgCheck((freq >= 2) && (freq <= 36),
+ "i2c_lld_set_clock() : Peripheral clock freq. out of range");
+ regCR2 |= freq;
+ i2cp->i2c_register->CR2 = regCR2;
+
+ /*---------------------------- CCR Configuration ------------------------*/
+ pe_bit_saved = (i2cp->i2c_register->CR1 & I2C_CR1_PE);
+ /* Disable the selected I2C peripheral to configure TRISE */
+ i2cp->i2c_register->CR1 &= (uint16_t)~I2C_CR1_PE;
+
+ /* Clear F/S, DUTY and CCR[11:0] bits */
+ regCCR = 0;
+ clock_div = I2C_CCR_CCR;
+ /* Configure clock_div in standard mode */
+ if (clock_speed <= 100000) {
+ chDbgAssert(duty == stdDutyCycle,
+ "i2c_lld_set_clock(), #3", "Invalid standard mode duty cycle");
+ /* Standard mode clock_div calculate: Tlow/Thigh = 1/1 */
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 2));
+ /* Test if CCR value is under 0x4, and set the minimum allowed value */
+ if (clock_div < 0x04) clock_div = 0x04;
+ /* Set clock_div value for standard mode */
+ regCCR |= (clock_div & I2C_CCR_CCR);
+ /* Set Maximum Rise Time for standard mode */
+ i2cp->i2c_register->TRISE = freq + 1;
+ }
+ /* Configure clock_div in fast mode */
+ else if(clock_speed <= 400000) {
+ chDbgAssert((duty == fastDutyCycle_2) || (duty == fastDutyCycle_16_9),
+ "i2c_lld_set_clock(), #3", "Invalid fast mode duty cycle");
+ if(duty == fastDutyCycle_2) {
+ /* Fast mode clock_div calculate: Tlow/Thigh = 2/1 */
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 3));
+ }
+ else if(duty == fastDutyCycle_16_9) {
+ /* Fast mode clock_div calculate: Tlow/Thigh = 16/9 */
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 25));
+ /* Set DUTY bit */
+ regCCR |= I2C_CCR_DUTY;
+ }
+ /* Test if CCR value is under 0x1, and set the minimum allowed value */
+ if(clock_div < 0x01) clock_div = 0x01;
+ /* Set clock_div value and F/S bit for fast mode*/
+ regCCR |= (I2C_CCR_FS | (clock_div & I2C_CCR_CCR));
+ /* Set Maximum Rise Time for fast mode */
+ i2cp->i2c_register->TRISE = (freq * 300 / 1000) + 1;
+ }
+ chDbgAssert((clock_div <= I2C_CCR_CCR),
+ "i2c_lld_set_clock(), #2", "Too low clock clock speed selected");
+
+ /* Write to I2Cx CCR */
+ i2cp->i2c_register->CCR = regCCR;
+
+ /* restore the I2C peripheral enabled state */
+ i2cp->i2c_register->CR1 |= pe_bit_saved;
+}
+
+void i2c_lld_set_opmode(I2CDriver *i2cp, I2C_opMode_t opmode) {
+ uint16_t regCR1;
+
+ /*---------------------------- CR1 Configuration ------------------------*/
+ /* Get the I2Cx CR1 value */
+ regCR1 = i2cp->i2c_register->CR1;
+ switch(opmode){
+ case opmodeI2C:
+ regCR1 &= (uint16_t)~(I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+ break;
+ case opmodeSMBusDevice:
+ regCR1 |= I2C_CR1_SMBUS;
+ regCR1 &= (uint16_t)~(I2C_CR1_SMBTYPE);
+ break;
+ case opmodeSMBusHost:
+ regCR1 |= (I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+ break;
+ }
+ /* Write to I2Cx CR1 */
+ i2cp->i2c_register->CR1 = regCR1;
+}
+
+void i2c_lld_set_own_address(I2CDriver *i2cp, int16_t address, int8_t nbit_addr) {
+ /*---------------------------- OAR1 Configuration -----------------------*/
+ /* Set the Own Address1 and bit number address acknowledged */
+ i2cp->i2c_register->OAR1 = address & I2C_OAR1_ADD0_9;
+ switch(nbit_addr) {
+ case 10:
+ i2cp->i2c_register->OAR1 |= I2C_OAR1_ADDMODE; // set ADDMODE bit and bit 14.
+ case 7:
+ i2cp->i2c_register->OAR1 |= I2C_OAR1_BIT14; // set only bit 14.
+ }
+}
+
+/**
+ * @brief Low level I2C driver initialization.
+ */
+void i2c_lld_init(void) {
+
+#if STM32_I2C_USE_I2C1
+ RCC->APB1RSTR = RCC_APB1RSTR_I2C1RST; // reset I2C 1
+ RCC->APB1RSTR = 0;
+ i2cObjectInit(&I2CD1);
+ I2CD1.i2c_register = I2C1;
+#endif
+#if STM32_I2C_USE_I2C2
+ RCC->APB1RSTR = RCC_APB1RSTR_I2C2RST; // reset I2C 2
+ RCC->APB1RSTR = 0;
+ i2cObjectInit(&I2CD2);
+ I2CD2.i2c_register = I2C2;
+#endif
+}
+
+/**
+ * @brief Configures and activates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_start(I2CDriver *i2cp) {
+ chDbgCheck((i2cp->state == I2C_STOP)||(i2cp->state == I2C_READY),
+ "i2c_lld_start: invalid state");
+
+ /* If in stopped state then enables the I2C clock.*/
+ if (i2cp->state == I2C_STOP) {
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ NVICEnableVector(I2C1_EV_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY);
+ NVICEnableVector(I2C1_ER_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY);
+ RCC->APB1ENR |= RCC_APB1ENR_I2C1EN; // I2C 1 clock enable
+ }
+#endif
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ NVICEnableVector(I2C2_EV_IRQn, STM32_I2C_I2C2_IRQ_PRIORITY);
+ NVICEnableVector(I2C2_ER_IRQn, STM32_I2C_I2C2_IRQ_PRIORITY);
+ RCC->APB1ENR |= RCC_APB1ENR_I2C2EN; // I2C 2 clock enable
+ }
+#endif
+ i2cp->i2c_register->CR1 |= I2C_CR1_PE; // enable I2C peripheral
+ }
+}
+
+/**
+ * @brief Deactivates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_stop(I2CDriver *i2cp) {
+
+ chDbgCheck((i2cp->state == I2C_READY),
+ "i2c_lld_stop: invalid state");
+
+ /* I2C disable.*/
+ i2cp->i2c_register->CR1 = 0;
+
+ /* If in ready state then disables the I2C clock.*/
+ if (i2cp->state == I2C_READY) {
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ NVICDisableVector(I2C1_EV_IRQn);
+ NVICDisableVector(I2C1_ER_IRQn);
+ RCC->APB1ENR &= ~RCC_APB1ENR_I2C1EN;
+ }
+#endif
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ NVICDisableVector(I2C2_EV_IRQn);
+ NVICDisableVector(I2C2_ER_IRQn);
+ RCC->APB1ENR &= ~RCC_APB1ENR_I2C2EN;
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Transmits data ever the I2C bus as master.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] n number of words to send
+ * @param[in] slave_addr1 the 7-bit address of the slave (should be aligned to left)
+ * @param[in] slave_addr2 used in 10 bit address mode
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ */
+void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *txbuf) {
+
+ // enable ERR, EVT & BUF ITs
+ i2cp->i2c_register->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN);
+ i2cp->i2c_register->CR1 &= ~I2C_CR1_POS;
+
+ switch(i2cp->nbit_address){
+ case 7:
+ i2cp->slave_addr1 = ((slave_addr <<1) & 0x00FE); // LSB = 0 -> write
+ break;
+ case 10:
+ i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); // add the two msb of 10-bit address to the header
+ i2cp->slave_addr1 |= 0xF0; // add the header bits with LSB = 0 -> write
+ i2cp->slave_addr2 = slave_addr & 0x00FF; // the remaining 8 bit of 10-bit address
+ break;
+ }
+
+ i2cp->txbuf = txbuf;
+ i2cp->remaining_bytes = n;
+ i2cp->flags = 0;
+ i2cp->errors = 0;
+
+ i2cp->i2c_register->CR1 |= I2C_CR1_START; // send start bit
+
+#if !I2C_USE_WAIT
+ /* Wait until the START condition is generated on the bus: the START bit is cleared by hardware */
+ uint32_t tmo = 0xfffff;
+ while((i2cp->i2c_register->CR1 & I2C_CR1_START) && tmo--)
+ ;
+#endif /* I2C_USE_WAIT */
+}
+
+/**
+ * @brief Receives data from the I2C bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] slave_addr1 7-bit address of he slave
+ * @param[in] slave_addr2 used in 10-bit address mode
+ * @param[in] n number of words to receive
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ */
+void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *rxbuf) {
+ // enable ERR, EVT & BUF ITs
+ i2cp->i2c_register->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN);
+ i2cp->i2c_register->CR1 |= I2C_CR1_ACK; // acknowledge returned
+ i2cp->i2c_register->CR1 &= ~I2C_CR1_POS;
+
+ switch(i2cp->nbit_address){
+ case 7:
+ i2cp->slave_addr1 = ((slave_addr <<1) | 0x01); // LSB = 1 -> receive
+ break;
+ case 10:
+ i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); // add the two msb of 10-bit address to the header
+ i2cp->slave_addr1 |= 0xF0; // add the header bits (the LSB -> 1 will be add to second
+ i2cp->slave_addr2 = slave_addr & 0x00FF; // the remaining 8 bit of 10-bit address
+ break;
+ }
+
+ i2cp->rxbuf = rxbuf;
+ i2cp->remaining_bytes = n;
+ i2cp->flags = I2C_FLG_MASTER_RECEIVER;
+ i2cp->errors = 0;
+
+ // Only one byte to be received
+ if(i2cp->remaining_bytes == 1) {
+ i2cp->flags |= I2C_FLG_1BTR;
+ }
+ // Only two bytes to be received
+ else if(i2cp->remaining_bytes == 2) {
+ i2cp->flags |= I2C_FLG_2BTR;
+ i2cp->i2c_register->CR1 |= I2C_CR1_POS; // Acknowledge Position
+ }
+
+ i2cp->i2c_register->CR1 |= I2C_CR1_START; // send start bit
+
+#if !I2C_USE_WAIT
+ /* Wait until the START condition is generated on the bus: the START bit is cleared by hardware */
+ uint32_t tmo = 0xfffff;
+ while((i2cp->i2c_register->CR1 & I2C_CR1_START) && tmo--)
+ ;
+#endif /* I2C_USE_WAIT */
+}
+
+#endif // HAL_USE_I2C
+
diff --git a/os/hal/platforms/STM32/i2c_lld_albi.h b/os/hal/platforms/STM32/i2c_lld_albi.h
new file mode 100644
index 000000000..2b63afec9
--- /dev/null
+++ b/os/hal/platforms/STM32/i2c_lld_albi.h
@@ -0,0 +1,263 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+/**
+ * @file STM32/i2c_lld.h
+ * @brief STM32 I2C subsystem low level driver header.
+ * @addtogroup STM32_I2C
+ * @{
+ */
+
+#ifndef _I2C_LLD_H_
+#define _I2C_LLD_H_
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+#define I2C_OAR1_ADD0_9 ((uint16_t)0x03FF) /*!<Interface Address */
+#define I2C_OAR1_BIT14 ((uint16_t)0x4000) /*!<bit 14 should always be kept at 1. */
+
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief I2C1 driver enable switch.
+ * @details If set to @p TRUE the support for I2C1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C1 TRUE
+#endif
+
+/**
+ * @brief I2C2 driver enable switch.
+ * @details If set to @p TRUE the support for I2C2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C2 TRUE
+#endif
+
+/**
+ * @brief I2C1 interrupt priority level setting.
+ * @note @p BASEPRI_KERNEL >= @p STM32_I2C1_IRQ_PRIORITY > @p PRIORITY_PENDSV.
+ */
+#if !defined(STM32_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C1_IRQ_PRIORITY 0xA0
+#endif
+
+/**
+ * @brief I2C2 interrupt priority level setting.
+ * @note @p BASEPRI_KERNEL >= @p STM32_I2C2_IRQ_PRIORITY > @p PRIORITY_PENDSV.
+ */
+#if !defined(STM32_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C2_IRQ_PRIORITY 0xA0
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/** @brief EV5 */
+#define I2C_EV5_MASTER_MODE_SELECT ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_SB)) /* BUSY, MSL and SB flag */
+/** @brief EV6 */
+#define I2C_EV6_MASTER_TRA_MODE_SELECTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_ADDR|I2C_SR1_TXE)) /* BUSY, MSL, ADDR, TXE and TRA flags */
+#define I2C_EV6_MASTER_REC_MODE_SELECTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_ADDR)) /* BUSY, MSL and ADDR flags */
+/** @brief EV7 */
+#define I2C_EV7_MASTER_REC_BYTE_RECEIVED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_RXNE)) /* BUSY, MSL and RXNE flags */
+#define I2C_EV7_MASTER_REC_BYTE_QUEUED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_BTF|I2C_SR1_RXNE)) /* BUSY, MSL, RXNE and BTF flags*/
+/** @brief EV8 */
+#define I2C_EV8_MASTER_BYTE_TRANSMITTING ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_TXE)) /* TRA, BUSY, MSL, TXE flags */
+/** @brief EV8_2 */
+#define I2C_EV8_2_MASTER_BYTE_TRANSMITTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_BTF|I2C_SR1_TXE)) /* TRA, BUSY, MSL, TXE and BTF flags */
+/** @brief EV9 */
+#define I2C_EV9_MASTER_ADDR_10BIT ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_ADD10)) /* BUSY, MSL and ADD10 flags */
+#define I2C_EV_MASK 0x00FFFFFF
+
+#define I2C_FLG_1BTR 0x01 // Single byte to be received and processed
+#define I2C_FLG_2BTR 0x02 // Two bytes to be received and processed
+#define I2C_FLG_3BTR 0x04 // Last three received bytes to be processed
+#define I2C_FLG_MASTER_RECEIVER 0x10
+#define I2C_FLG_HEADER_SENT 0x80
+
+#define EV6_SUBEV_MASK (I2C_FLG_1BTR|I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER)
+#define EV7_SUBEV_MASK (I2C_FLG_2BTR|I2C_FLG_3BTR|I2C_FLG_MASTER_RECEIVER)
+
+#define I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED (I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER)
+#define I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED (I2C_FLG_1BTR|I2C_FLG_MASTER_RECEIVER)
+#define I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS (I2C_FLG_3BTR|I2C_FLG_MASTER_RECEIVER)
+#define I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS (I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER)
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+/**
+ * @brief Serial Driver condition flags type.
+ */
+typedef uint32_t i2cflags_t;
+
+typedef enum {
+ opmodeI2C,
+ opmodeSMBusDevice,
+ opmodeSMBusHost,
+} I2C_opMode_t;
+
+typedef enum {
+ stdDutyCycle,
+ fastDutyCycle_2,
+ fastDutyCycle_16_9,
+} I2C_DutyCycle_t;
+
+/**
+ * @brief Type of a structure representing an SPI driver.
+ */
+typedef struct I2CDriver I2CDriver;
+
+/**
+ * @brief I2C notification callback type.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object triggering the
+ * callback
+ */
+typedef void (*i2ccallback_t)(I2CDriver *i2cp);
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ I2C_opMode_t opMode; /*!< Specifies the I2C mode.*/
+
+ uint32_t ClockSpeed; /*!< Specifies the clock frequency. Must be set to a value lower than 400kHz */
+
+ I2C_DutyCycle_t FastModeDutyCycle; /*!< Specifies the I2C fast mode duty cycle */
+
+ uint16_t OwnAddress1; /*!< Specifies the first device own address. Can be a 7-bit or 10-bit address. */
+
+ uint16_t Ack; /*!< Enables or disables the acknowledgement. */
+
+ uint8_t nBitAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged */
+
+} I2CConfig;
+
+/**
+ * @brief Structure representing an I2C driver.
+ */
+struct I2CDriver {
+ /**
+ * @brief Driver state.
+ */
+ i2cstate_t state;
+ /**
+ * @brief Operation complete callback or @p NULL.
+ */
+ i2ccallback_t endcb;
+#if I2C_USE_WAIT
+ /**
+ * @brief Thread waiting for I/O completion.
+ */
+ Thread *thread;
+#endif /* I2C_USE_WAIT */
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+#if CH_USE_MUTEXES || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the bus.
+ */
+ Mutex mutex;
+#elif CH_USE_SEMAPHORES
+ Semaphore semaphore;
+#endif
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the I2Cx registers block.
+ */
+ I2C_TypeDef *i2c_register;
+ size_t remaining_bytes;
+ uint8_t *rxbuf;
+ uint8_t *txbuf;
+ uint8_t slave_addr1; // 7-bit address of the slave
+ uint8_t slave_addr2; // used in 10-bit address mode
+ uint8_t nbit_address;
+ i2cflags_t errors;
+ i2cflags_t flags;
+ /* Status Change @p EventSource.*/
+ EventSource sevent;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+#define i2c_lld_bus_is_busy(i2cp) \
+ (i2cp->i2c_register->SR2 & I2C_SR2_BUSY)
+
+
+/* Wait until BUSY flag is reset: a STOP has been generated on the bus
+ * signaling the end of transmission
+ */
+#define i2c_lld_wait_bus_free(i2cp) { \
+ uint32_t tmo = 0xffff; \
+ while((i2cp->i2c_register->SR2 & I2C_SR2_BUSY) && tmo--) \
+ ; \
+}
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+/** @cond never*/
+#if STM32_I2C_USE_I2C1
+extern I2CDriver I2CD1;
+#endif
+
+#if STM32_I2C_USE_I2C2
+extern I2CDriver I2CD2;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void i2c_lld_init(void);
+void i2c_lld_reset(I2CDriver *i2cp);
+void i2c_lld_set_clock(I2CDriver *i2cp, int32_t clock_speed, I2C_DutyCycle_t duty);
+void i2c_lld_set_opmode(I2CDriver *i2cp, I2C_opMode_t opmode);
+void i2c_lld_set_own_address(I2CDriver *i2cp, int16_t address, int8_t nr_bit);
+void i2c_lld_start(I2CDriver *i2cp);
+void i2c_lld_stop(I2CDriver *i2cp);
+void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *txbuf);
+void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *rxbuf);
+
+#ifdef __cplusplus
+}
+#endif
+/** @endcond*/
+
+#endif // CH_HAL_USE_I2C
+
+#endif // _I2C_LLD_H_
diff --git a/os/hal/platforms/STM32/i2c_lld_brts.c b/os/hal/platforms/STM32/i2c_lld_brts.c
new file mode 100644
index 000000000..1ac7e4309
--- /dev/null
+++ b/os/hal/platforms/STM32/i2c_lld_brts.c
@@ -0,0 +1,626 @@
+/**
+ * @file STM32/i2c_lld.c
+ * @brief STM32 I2C subsystem low level driver source. Slave mode not implemented.
+ * @addtogroup STM32_I2C
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+#include "i2c_lld.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief I2C1 driver identifier.*/
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+I2CDriver I2CD1;
+#endif
+
+/** @brief I2C2 driver identifier.*/
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+I2CDriver I2CD2;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Interrupt service routine.
+ * @details This function handle all ERROR interrupt conditions.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+static void i2c_serve_error_interrupt(I2CDriver *i2cp) {
+ //TODO: more robust error handling
+ chSysLockFromIsr();
+ i2cp->id_slave_config->id_err_callback(i2cp, i2cp->id_slave_config);
+ chSysUnlockFromIsr();
+}
+
+/* helper function, not API
+ * write bytes in DR register
+ * return TRUE if last byte written
+ */
+inline bool_t i2c_lld_txbyte(I2CDriver *i2cp) {
+#define _txbufhead (i2cp->id_slave_config->txbufhead)
+#define _txbytes (i2cp->id_slave_config->txbytes)
+#define _txbuf (i2cp->id_slave_config->txbuf)
+
+ if (_txbufhead < _txbytes){
+ /* disable interrupt to avoid jumping to ISR */
+ if ( _txbytes - _txbufhead == 1)
+ i2cp->id_i2c->CR2 &= (~I2C_CR2_ITBUFEN);
+ i2cp->id_i2c->DR = _txbuf[_txbufhead];
+ (_txbufhead)++;
+ return(FALSE);
+ }
+ _txbufhead = 0;
+ return(TRUE); // last byte written
+#undef _txbufhead
+#undef _txbytes
+#undef _txbuf
+}
+
+
+/* helper function, not API
+ * read bytes from DR register
+ * return TRUE if last byte read
+ */
+inline bool_t i2c_lld_rxbyte(I2CDriver *i2cp) {
+ // temporal variables
+#define _rxbuf (i2cp->id_slave_config->rxbuf)
+#define _rxbufhead (i2cp->id_slave_config->rxbufhead)
+#define _rxbytes (i2cp->id_slave_config->rxbytes)
+
+ /* In order to generate the non-acknowledge pulse after the last received
+ * data byte, the ACK bit must be cleared just after reading the second
+ * last data byte (after second last RxNE event).
+ */
+ if (_rxbufhead < (_rxbytes - 1)){
+ _rxbuf[_rxbufhead] = i2cp->id_i2c->DR;
+ if ((_rxbytes - _rxbufhead) <= 2){
+ // clear ACK bit for automatically send NACK
+ i2cp->id_i2c->CR1 &= (~I2C_CR1_ACK);
+ }
+ (_rxbufhead)++;
+ return(FALSE);
+ }
+ /* disable interrupt to avoid jumping to ISR */
+ i2cp->id_i2c->CR2 &= (~I2C_CR2_ITBUFEN);
+
+ _rxbuf[_rxbufhead] = i2cp->id_i2c->DR; // read last byte
+ _rxbufhead = 0;
+ return(TRUE); // last byte read
+
+#undef _rxbuf
+#undef _rxbufhead
+#undef _rxbytes
+}
+
+
+/**
+ * @brief Interrupt service routine.
+ * @details This function handle all regular interrupt conditions.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+static void i2c_serve_event_interrupt(I2CDriver *i2cp) {
+
+#if CH_DBG_ENABLE_CHECKS
+ // debug variables
+ int i = 0;
+ int n = 0;
+ int m = 0;
+#endif
+
+ /* In 10-bit addressing mode,
+ – To enter Transmitter mode, a master sends the header (11110xx0) and then the
+ slave address, (where xx denotes the two most significant bits of the address).
+ – To enter Receiver mode, a master sends the header (11110xx0) and then the
+ slave address. Then it should send a repeated Start condition followed by the
+ header (11110xx1), (where xx denotes the two most significant bits of the
+ address).
+ The TRA bit indicates whether the master is in Receiver or Transmitter mode.*/
+
+ if ((i2cp->id_state == I2C_READY) && (i2cp->id_i2c->SR1 & I2C_SR1_SB)){// start bit sent
+ i2cp->id_state = I2C_MACTIVE;
+
+ if(!(i2cp->id_slave_config->address & 0x8000)){ // slave address is 7-bit
+ i2cp->id_i2c->DR = ((i2cp->id_slave_config->address & 0x7F) << 1) |
+ i2cp->rw_bit;
+ i2cp->id_state = I2C_MWAIT_ADDR_ACK;
+ return;
+ }
+ else{ // slave address is 10-bit
+ i2cp->id_state = I2C_10BIT_HANDSHAKE;
+ // send MSB with header. LSB = 0.
+ i2cp->id_i2c->DR = ((i2cp->id_slave_config->address >> 7) & 0x6) | 0xF0;
+ return;
+ }
+ }
+
+ // "wait" interrupt with ADD10 flag
+ if ((i2cp->id_state == I2C_10BIT_HANDSHAKE) && (i2cp->id_i2c->SR1 & I2C_SR1_ADD10)){
+ i2cp->id_i2c->DR = i2cp->id_slave_config->address & 0x00FF; // send remaining bits of address
+ if (!(i2cp->rw_bit))
+ // in transmit mode there is nothing to do with 10-bit handshaking
+ i2cp->id_state = I2C_MWAIT_ADDR_ACK;
+ return;
+ }
+
+ // "wait" interrupt with ADDR flag
+ if ((i2cp->id_state == I2C_10BIT_HANDSHAKE) && (i2cp->id_i2c->SR1 & I2C_SR1_ADDR)){// address ACKed
+ i2cp->id_i2c->CR1 |= I2C_CR1_START;
+ return;
+ }
+
+ if ((i2cp->id_state == I2C_10BIT_HANDSHAKE) && (i2cp->id_i2c->SR1 & I2C_SR1_SB)){// restart generated
+ // send MSB with header. LSB = 1
+ i2cp->id_i2c->DR = ((i2cp->id_slave_config->address >> 7) & 0x6) | 0xF1;
+ i2cp->id_state = I2C_MWAIT_ADDR_ACK;
+ return;
+ }
+
+ // "wait" interrupt with ADDR (ADD10 in 10-bit receiver mode) flag
+ if ((i2cp->id_state == I2C_MWAIT_ADDR_ACK) && (i2cp->id_i2c->SR1 & (I2C_SR1_ADDR | I2C_SR1_ADD10))){// address ACKed
+ if(i2cp->id_i2c->SR2 & I2C_SR2_TRA){// I2C is transmitting data
+ i2cp->id_state = I2C_MTRANSMIT; // change state
+ i2c_lld_txbyte(i2cp); // send first byte
+ return;
+ }
+ else {// I2C is receiving data
+ /* In order to generate the non-acknowledge pulse after the last received
+ * data byte, the ACK bit must be cleared just after reading the second
+ * last data byte (after second last RxNE event).
+ */
+ if (i2cp->id_slave_config->rxbytes > 1)
+ i2cp->id_i2c->CR1 |= I2C_CR1_ACK; // set ACK bit
+ i2cp->id_state = I2C_MRECEIVE; // change state
+ return;
+ }
+ }
+
+ // transmitting bytes one by one
+ if ((i2cp->id_state == I2C_MTRANSMIT) && (i2cp->id_i2c->SR1 & I2C_SR1_TXE)){
+ if (i2c_lld_txbyte(i2cp))
+ i2cp->id_state = I2C_MWAIT_TF; // last byte written
+ return;
+ }
+
+ //receiving bytes one by one
+ if ((i2cp->id_state == I2C_MRECEIVE) && (i2cp->id_i2c->SR1 & I2C_SR1_RXNE)){
+ if (i2c_lld_rxbyte(i2cp))
+ i2cp->id_state = I2C_MWAIT_TF; // last byte read
+ return;
+ }
+
+ // "wait" BTF bit in status register
+ if ((i2cp->id_state == I2C_MWAIT_TF) && (i2cp->id_i2c->SR1 & I2C_SR1_BTF)){
+ chSysLockFromIsr();
+ i2cp->id_i2c->CR2 &= (~I2C_CR2_ITEVTEN); // disable BTF interrupt
+ chSysUnlockFromIsr();
+ /* now driver is ready to generate (re)start/stop condition.
+ * Callback function is good place to do that. If not callback was
+ * set - driver only generate stop condition. */
+ i2cp->id_state = I2C_READY;
+
+ if (i2cp->id_slave_config->id_callback != NULL)
+ i2cp->id_slave_config->id_callback(i2cp, i2cp->id_slave_config);
+ else /* No callback function set. Generate stop */
+ i2c_lld_master_stop(i2cp);
+
+ return;
+ }
+#if CH_DBG_ENABLE_CHECKS
+ else{ // debugging trap
+ i = i2cp->id_i2c->SR1;
+ n = i2cp->id_i2c->SR2;
+ m = i2cp->id_i2c->CR1;
+ while(TRUE);
+ }
+#endif /* CH_DBG_ENABLE_CHECKS */
+}
+
+#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__)
+/**
+ * @brief I2C1 event interrupt handler.
+ */
+CH_IRQ_HANDLER(VectorBC) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_event_interrupt(&I2CD1);
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C1 error interrupt handler.
+ */
+CH_IRQ_HANDLER(VectorC0) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_error_interrupt(&I2CD1);
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__)
+/**
+ * @brief I2C2 event interrupt handler.
+ */
+CH_IRQ_HANDLER(VectorC4) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_event_interrupt(&I2CD2);
+ CH_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief I2C2 error interrupt handler.
+ */
+CH_IRQ_HANDLER(VectorC8) {
+
+ CH_IRQ_PROLOGUE();
+ i2c_serve_error_interrupt(&I2CD2);
+ CH_IRQ_EPILOGUE();
+}
+#endif
+
+/**
+ * @brief Low level I2C driver initialization.
+ */
+void i2c_lld_init(void) {
+
+#if STM32_I2C_USE_I2C1
+ RCC->APB1RSTR = RCC_APB1RSTR_I2C1RST; // reset I2C 1
+ RCC->APB1RSTR = 0;
+ i2cObjectInit(&I2CD1);
+ I2CD1.id_i2c = I2C1;
+#endif
+
+#if STM32_I2C_USE_I2C2
+ RCC->APB1RSTR = RCC_APB1RSTR_I2C2RST; // reset I2C 2
+ RCC->APB1RSTR = 0;
+ i2cObjectInit(&I2CD2);
+ I2CD2.id_i2c = I2C2;
+#endif
+}
+
+/**
+ * @brief Configures and activates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_start(I2CDriver *i2cp) {
+
+ /* If in stopped state then enables the I2C clock.*/
+ if (i2cp->id_state == I2C_STOP) {
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ NVICEnableVector(I2C1_EV_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY);
+ NVICEnableVector(I2C1_ER_IRQn, STM32_I2C_I2C1_IRQ_PRIORITY);
+ RCC->APB1ENR |= RCC_APB1ENR_I2C1EN; // I2C 1 clock enable
+ }
+#endif
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ NVICEnableVector(I2C2_EV_IRQn, STM32_I2C_I2C2_IRQ_PRIORITY);
+ NVICEnableVector(I2C2_ER_IRQn, STM32_I2C_I2C2_IRQ_PRIORITY);
+ RCC->APB1ENR |= RCC_APB1ENR_I2C2EN; // I2C 2 clock enable
+ }
+#endif
+ }
+
+ /* I2C setup.*/
+ i2cp->id_i2c->CR1 = I2C_CR1_SWRST; // reset i2c peripherial
+ i2cp->id_i2c->CR1 = 0;
+
+ i2c_lld_set_clock(i2cp);
+ i2c_lld_set_opmode(i2cp);
+ i2cp->id_i2c->CR2 |= I2C_CR2_ITERREN | I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN;// enable interrupts
+ i2cp->id_i2c->CR1 |= 1; // enable interface
+}
+
+/**
+ * @brief Set clock speed.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_set_clock(I2CDriver *i2cp) {
+ volatile uint16_t regCCR, regCR2, freq, clock_div;
+ volatile uint16_t pe_bit_saved;
+ int32_t clock_speed = i2cp->id_config->ClockSpeed;
+ I2C_DutyCycle_t duty = i2cp->id_config->FastModeDutyCycle;
+
+ chDbgCheck((i2cp != NULL) && (clock_speed > 0) && (clock_speed <= 4000000),
+ "i2c_lld_set_clock");
+
+ /*---------------------------- CR2 Configuration ------------------------*/
+ /* Get the I2Cx CR2 value */
+ regCR2 = i2cp->id_i2c->CR2;
+
+ /* Clear frequency FREQ[5:0] bits */
+ regCR2 &= (uint16_t)~I2C_CR2_FREQ;
+ /* Set frequency bits depending on pclk1 value */
+ freq = (uint16_t)(STM32_PCLK1 / 1000000);
+ chDbgCheck((freq >= 2) && (freq <= 36),
+ "i2c_lld_set_clock() : Peripheral clock freq. out of range");
+ regCR2 |= freq;
+ i2cp->id_i2c->CR2 = regCR2;
+
+ /*---------------------------- CCR Configuration ------------------------*/
+ pe_bit_saved = (i2cp->id_i2c->CR1 & I2C_CR1_PE);
+ /* Disable the selected I2C peripheral to configure TRISE */
+ i2cp->id_i2c->CR1 &= (uint16_t)~I2C_CR1_PE;
+
+ /* Clear F/S, DUTY and CCR[11:0] bits */
+ regCCR = 0;
+ clock_div = I2C_CCR_CCR;
+ /* Configure clock_div in standard mode */
+ if (clock_speed <= 100000) {
+ chDbgAssert(duty == stdDutyCycle,
+ "i2c_lld_set_clock(), #1", "Invalid standard mode duty cycle");
+ /* Standard mode clock_div calculate: Tlow/Thigh = 1/1 */
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 2));
+ /* Test if CCR value is under 0x4, and set the minimum allowed value */
+ if (clock_div < 0x04) clock_div = 0x04;
+ /* Set clock_div value for standard mode */
+ regCCR |= (clock_div & I2C_CCR_CCR);
+ /* Set Maximum Rise Time for standard mode */
+ i2cp->id_i2c->TRISE = freq + 1;
+ }
+ /* Configure clock_div in fast mode */
+ else if(clock_speed <= 400000) {
+ chDbgAssert((duty == fastDutyCycle_2) || (duty == fastDutyCycle_16_9),
+ "i2c_lld_set_clock(), #2", "Invalid fast mode duty cycle");
+ if(duty == fastDutyCycle_2) {
+ /* Fast mode clock_div calculate: Tlow/Thigh = 2/1 */
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 3));
+ }
+ else if(duty == fastDutyCycle_16_9) {
+ /* Fast mode clock_div calculate: Tlow/Thigh = 16/9 */
+ clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 25));
+ /* Set DUTY bit */
+ regCCR |= I2C_CCR_DUTY;
+ }
+ /* Test if CCR value is under 0x1, and set the minimum allowed value */
+ if(clock_div < 0x01) clock_div = 0x01;
+ /* Set clock_div value and F/S bit for fast mode*/
+ regCCR |= (I2C_CCR_FS | (clock_div & I2C_CCR_CCR));
+ /* Set Maximum Rise Time for fast mode */
+ i2cp->id_i2c->TRISE = (freq * 300 / 1000) + 1;
+ }
+ chDbgAssert((clock_div <= I2C_CCR_CCR),
+ "i2c_lld_set_clock(), #3", "Too low clock clock speed selected");
+
+ /* Write to I2Cx CCR */
+ i2cp->id_i2c->CCR = regCCR;
+
+ /* restore the I2C peripheral enabled state */
+ i2cp->id_i2c->CR1 |= pe_bit_saved;
+}
+
+/**
+ * @brief Set operation mode of I2C hardware.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_set_opmode(I2CDriver *i2cp) {
+ I2C_opMode_t opmode = i2cp->id_config->opMode;
+ uint16_t regCR1;
+
+ /*---------------------------- CR1 Configuration ------------------------*/
+ /* Get the I2Cx CR1 value */
+ regCR1 = i2cp->id_i2c->CR1;
+ switch(opmode){
+ case opmodeI2C:
+ regCR1 &= (uint16_t)~(I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+ break;
+ case opmodeSMBusDevice:
+ regCR1 |= I2C_CR1_SMBUS;
+ regCR1 &= (uint16_t)~(I2C_CR1_SMBTYPE);
+ break;
+ case opmodeSMBusHost:
+ regCR1 |= (I2C_CR1_SMBUS|I2C_CR1_SMBTYPE);
+ break;
+ }
+ /* Write to I2Cx CR1 */
+ i2cp->id_i2c->CR1 = regCR1;
+}
+
+/**
+ * @brief Set own address.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_set_own_address(I2CDriver *i2cp) {
+ //TODO: dual address mode
+
+ /*---------------------------- OAR1 Configuration -----------------------*/
+ i2cp->id_i2c->OAR1 |= 1 << 14;
+
+ if (&(i2cp->id_config->OwnAddress10) == NULL){// only 7-bit address
+ i2cp->id_i2c->OAR1 &= (~I2C_OAR1_ADDMODE);
+ i2cp->id_i2c->OAR1 |= i2cp->id_config->OwnAddress7 << 1;
+ }
+ else {
+ chDbgAssert((i2cp->id_config->OwnAddress10 < 1024),
+ "i2c_lld_set_own_address(), #1", "10-bit address longer then 10 bit")
+ i2cp->id_i2c->OAR1 |= I2C_OAR1_ADDMODE;
+ i2cp->id_i2c->OAR1 |= i2cp->id_config->OwnAddress10;
+ }
+}
+
+
+/**
+ * @brief Deactivates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_stop(I2CDriver *i2cp) {
+
+ /* If in ready state then disables the I2C clock.*/
+ if (i2cp->id_state == I2C_READY) {
+#if STM32_I2C_USE_I2C1
+ if (&I2CD1 == i2cp) {
+ NVICDisableVector(I2C1_EV_IRQn);
+ NVICDisableVector(I2C1_ER_IRQn);
+ RCC->APB1ENR &= ~RCC_APB1ENR_I2C1EN;
+ }
+#endif
+#if STM32_I2C_USE_I2C2
+ if (&I2CD2 == i2cp) {
+ NVICDisableVector(I2C2_EV_IRQn);
+ NVICDisableVector(I2C2_ER_IRQn);
+ RCC->APB1ENR &= ~RCC_APB1ENR_I2C2EN;
+ }
+#endif
+ }
+ i2cp->id_state = I2C_STOP;
+}
+
+/**
+ * @brief Generate start condition.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_master_start(I2CDriver *i2cp){
+ i2cp->id_i2c->CR1 |= I2C_CR1_START;
+ while (i2cp->id_i2c->CR1 & I2C_CR1_START);
+
+ /* enable interrupts from I2C hardware. They will disable in driver state
+ machine after the transfer finish.*/
+ i2cp->id_i2c->CR2 |= I2C_CR2_ITEVTEN | I2C_CR2_ITBUFEN;
+}
+
+/**
+ * @brief Generate stop condition.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2c_lld_master_stop(I2CDriver *i2cp){
+ i2cp->id_i2c->CR1 |= I2C_CR1_STOP;
+ while (i2cp->id_i2c->CR1 & I2C_CR1_STOP);
+}
+
+/**
+ * @brief Begin data transmitting.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object
+ */
+void i2c_lld_master_transmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg){
+
+ i2cp->id_slave_config = i2cscfg;
+ i2cp->rw_bit = I2C_WRITE;
+
+ // generate start condition. Later transmission goes in background
+ i2c_lld_master_start(i2cp);
+}
+
+/**
+ * @brief Begin data receiving.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object
+ */
+void i2c_lld_master_receive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg){
+
+ i2cp->id_slave_config = i2cscfg;
+ i2cp->rw_bit = I2C_READ;
+
+ // generate (re)start condition. Later connection goes asynchronously
+ i2c_lld_master_start(i2cp);
+}
+
+
+
+/**
+ * @brief Transmits data via I2C bus.
+ *
+ * @note This function does not use interrupts
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object
+ * @param[in] restart bool. If TRUE then generate restart condition instead of stop
+ */
+void i2c_lld_master_transmit_NI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg, bool_t restart) {
+
+ int i = 0;
+
+ i2cp->id_slave_config = i2cscfg;
+ i2cp->rw_bit = I2C_WRITE;
+
+
+ i2cp->id_i2c->CR1 |= I2C_CR1_START; // generate start condition
+ while (!(i2cp->id_i2c->SR1 & I2C_SR1_SB)); // wait Address sent
+
+ i2cp->id_i2c->DR = (i2cp->id_slave_config->address << 1) | I2C_WRITE; // write slave addres in DR
+ while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR)); // wait Address sent
+ i = i2cp->id_i2c->SR2;
+ i = i2cp->id_i2c->SR1; //i2cp->id_i2c->SR1 &= (~I2C_SR1_ADDR); // clear ADDR bit
+
+ // now write data byte by byte in DR register
+ uint32_t n = 0;
+ for (n = 0; n < i2cp->id_slave_config->txbytes; n++){
+ i2cp->id_i2c->DR = i2cscfg->txbuf[n];
+ while (!(i2cp->id_i2c->SR1 & I2C_SR1_TXE));
+ }
+
+ while (!(i2cp->id_i2c->SR1 & I2C_SR1_BTF));
+
+ if (restart){
+ i2cp->id_i2c->CR1 |= I2C_CR1_START; // generate restart condition
+ while (!(i2cp->id_i2c->SR1 & I2C_SR1_SB)); // wait start bit
+ }
+ else i2cp->id_i2c->CR1 |= I2C_CR1_STOP; // generate stop condition
+}
+
+
+/**
+ * @brief Receives data from the I2C bus.
+ * @note This function does not use interrupts
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object
+ */
+void i2c_lld_master_receive_NI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg) {
+
+ i2cp->id_slave_config = i2cscfg;
+
+ uint16_t i = 0;
+
+ // send slave addres with read-bit
+ i2cp->id_i2c->DR = (i2cp->id_slave_config->address << 1) | I2C_READ;
+ while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR)); // wait Address sent
+
+ i = i2cp->id_i2c->SR2;
+ i = i2cp->id_i2c->SR1; //i2cp->id_i2c->SR1 &= (~I2C_SR1_ADDR); // clear ADDR bit
+
+ // set ACK bit
+ i2cp->id_i2c->CR1 |= I2C_CR1_ACK;
+
+ // collect data from slave
+ for (i = 0; i < i2cp->id_slave_config->rxbytes; i++){
+ if ((i2cp->id_slave_config->rxbytes - i) == 1){
+ // clear ACK bit for automatically send NACK
+ i2cp->id_i2c->CR1 &= (~I2C_CR1_ACK);}
+ while (!(i2cp->id_i2c->SR1 & I2C_SR1_RXNE));
+
+ i2cp->id_slave_config->rxbuf[i] = i2cp->id_i2c->DR;
+ }
+ // generate STOP
+ i2cp->id_i2c->CR1 |= I2C_CR1_STOP;
+}
+
+
+
+#endif // HAL_USE_I2C
diff --git a/os/hal/platforms/STM32/i2c_lld_btrts.h b/os/hal/platforms/STM32/i2c_lld_btrts.h
new file mode 100644
index 000000000..76f7068e2
--- /dev/null
+++ b/os/hal/platforms/STM32/i2c_lld_btrts.h
@@ -0,0 +1,201 @@
+/**
+ * @file STM32/i2c_lld.h
+ * @brief STM32 I2C subsystem low level driver header.
+ * @addtogroup STM32_I2C
+ * @{
+ */
+
+#ifndef _I2C_LLD_H_
+#define _I2C_LLD_H_
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief I2C1 driver enable switch.
+ * @details If set to @p TRUE the support for I2C1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C1 TRUE
+#endif
+
+/**
+ * @brief I2C2 driver enable switch.
+ * @details If set to @p TRUE the support for I2C2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C2 TRUE
+#endif
+
+/**
+ * @brief I2C1 interrupt priority level setting.
+ * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C1_IRQ_PRIORITY > @p PRIORITY_PENDSV.
+ */
+#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 0xA0
+#endif
+
+/**
+ * @brief I2C2 interrupt priority level setting.
+ * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C2_IRQ_PRIORITY > @p PRIORITY_PENDSV.
+ */
+#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_IRQ_PRIORITY 0xA0
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+#define I2CD_NO_ERROR 0
+/** @brief Bus Error.*/
+#define I2CD_BUS_ERROR 0x01
+/** @brief Arbitration Lost (master mode).*/
+#define I2CD_ARBITRATION_LOST 0x02
+/** @brief Acknowledge Failure.*/
+#define I2CD_ACK_FAILURE 0x04
+/** @brief Overrun/Underrun.*/
+#define I2CD_OVERRUN 0x08
+/** @brief PEC Error in reception.*/
+#define I2CD_PEC_ERROR 0x10
+/** @brief Timeout or Tlow Error.*/
+#define I2CD_TIMEOUT 0x20
+/** @brief SMBus Alert.*/
+#define I2CD_SMB_ALERT 0x40
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+typedef enum {
+ opmodeI2C,
+ opmodeSMBusDevice,
+ opmodeSMBusHost,
+} I2C_opMode_t;
+
+typedef enum {
+ stdDutyCycle,
+ fastDutyCycle_2,
+ fastDutyCycle_16_9,
+} I2C_DutyCycle_t;
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ I2C_opMode_t opMode; /*!< Specifies the I2C mode.*/
+ uint32_t ClockSpeed; /*!< Specifies the clock frequency. Must be set to a value lower than 400kHz */
+ I2C_DutyCycle_t FastModeDutyCycle;/*!< Specifies the I2C fast mode duty cycle */
+ uint8_t OwnAddress7; /*!< Specifies the first device 7-bit own address. */
+ uint16_t OwnAddress10; /*!< Specifies the second part of device own address in 10-bit mode. Set to NULL if not used. */
+} I2CConfig;
+
+
+/**
+ * @brief Type of a structure representing an I2C driver.
+ */
+typedef struct I2CDriver I2CDriver;
+
+/**
+ * @brief Type of a structure representing an I2C slave config.
+ */
+typedef struct I2CSlaveConfig I2CSlaveConfig;
+
+/**
+ * @brief Structure representing an I2C driver.
+ */
+struct I2CDriver{
+ /**
+ * @brief Driver state.
+ */
+ i2cstate_t id_state;
+#if I2C_USE_WAIT
+ /**
+ * @brief Thread waiting for I/O completion.
+ */
+ Thread *thread;
+#endif /* I2C_USE_WAIT */
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+#if CH_USE_MUTEXES || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the bus.
+ */
+ Mutex id_mutex;
+#elif CH_USE_SEMAPHORES
+ Semaphore id_semaphore;
+#endif
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+ /**
+ * @brief Current configuration data.
+ */
+ I2CConfig *id_config;
+ /**
+ * @brief Current slave configuration data.
+ */
+ I2CSlaveConfig *id_slave_config;
+ /**
+ * @brief RW-bit sent to slave.
+ */
+ uint8_t rw_bit;
+
+ /*********** End of the mandatory fields. **********************************/
+
+ /**
+ * @brief Pointer to the I2Cx registers block.
+ */
+ I2C_TypeDef *id_i2c;
+} ;
+
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+/** @cond never*/
+#if STM32_I2C_USE_I2C1
+extern I2CDriver I2CD1;
+#endif
+
+#if STM32_I2C_USE_I2C2
+extern I2CDriver I2CD2;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void i2c_lld_init(void);
+void i2c_lld_start(I2CDriver *i2cp);
+void i2c_lld_stop(I2CDriver *i2cp);
+void i2c_lld_set_clock(I2CDriver *i2cp);
+void i2c_lld_set_opmode(I2CDriver *i2cp);
+void i2c_lld_set_own_address(I2CDriver *i2cp);
+
+void i2c_lld_master_start(I2CDriver *i2cp);
+void i2c_lld_master_stop(I2CDriver *i2cp);
+
+void i2c_lld_master_transmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+void i2c_lld_master_receive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+
+void i2c_lld_master_transmit_NI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg, bool_t restart);
+void i2c_lld_master_receive_NI(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg);
+
+#ifdef __cplusplus
+}
+#endif
+/** @endcond*/
+
+#endif // CH_HAL_USE_I2C
+
+#endif // _I2C_LLD_H_
diff --git a/os/hal/platforms/STM32/platform.mk b/os/hal/platforms/STM32/platform.mk
index f0aec9de6..02f090e5e 100644
--- a/os/hal/platforms/STM32/platform.mk
+++ b/os/hal/platforms/STM32/platform.mk
@@ -10,8 +10,8 @@ PLATFORMSRC = ${CHIBIOS}/os/hal/platforms/STM32/hal_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/serial_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/spi_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/uart_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/usb_lld.c \
- ${CHIBIOS}/os/hal/platforms/STM32/stm32_dma.c
+ ${CHIBIOS}/os/hal/platforms/STM32/stm32_dma.c \
+ ${CHIBIOS}/os/hal/platforms/STM32/i2c_lld.c
# Required include directories
PLATFORMINC = ${CHIBIOS}/os/hal/platforms/STM32
diff --git a/os/hal/src/i2c.c b/os/hal/src/i2c.c
index 86bfc16f6..6f99a1afb 100644
--- a/os/hal/src/i2c.c
+++ b/os/hal/src/i2c.c
@@ -55,7 +55,6 @@
* @init
*/
void i2cInit(void) {
-
i2c_lld_init();
}
@@ -68,8 +67,22 @@ void i2cInit(void) {
*/
void i2cObjectInit(I2CDriver *i2cp) {
- i2cp->i2c_state = I2C_STOP;
- i2cp->i2c_config = NULL;
+ i2cp->id_state = I2C_STOP;
+ i2cp->id_config = NULL;
+ i2cp->id_slave_config = NULL;
+
+#if I2C_USE_WAIT
+ i2cp->id_thread = NULL;
+#endif /* I2C_USE_WAIT */
+
+#if I2C_USE_MUTUAL_EXCLUSION
+#if CH_USE_MUTEXES
+ chMtxInit(&i2cp->id_mutex);
+#else
+ chSemInit(&i2cp->id_semaphore, 1);
+#endif /* CH_USE_MUTEXES */
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+
#if defined(I2C_DRIVER_EXT_INIT_HOOK)
I2C_DRIVER_EXT_INIT_HOOK(i2cp);
#endif
@@ -83,17 +96,17 @@ void i2cObjectInit(I2CDriver *i2cp) {
*
* @api
*/
-void i2cStart(I2CDriver *i2cp, const I2CConfig *config) {
+void i2cStart(I2CDriver *i2cp, I2CConfig *config) {
chDbgCheck((i2cp != NULL) && (config != NULL), "i2cStart");
chSysLock();
- chDbgAssert((i2cp->i2c_state == I2C_STOP) || (i2cp->i2c_state == I2C_READY),
+ chDbgAssert((i2cp->id_state == I2C_STOP) || (i2cp->id_state == I2C_READY),
"i2cStart(), #1",
"invalid state");
- i2cp->i2c_config = config;
+ i2cp->id_config = config;
i2c_lld_start(i2cp);
- i2cp->i2c_state = I2C_READY;
+ i2cp->id_state = I2C_READY;
chSysUnlock();
}
@@ -109,151 +122,190 @@ void i2cStop(I2CDriver *i2cp) {
chDbgCheck(i2cp != NULL, "i2cStop");
chSysLock();
- chDbgAssert((i2cp->i2c_state == I2C_STOP) || (i2cp->i2c_state == I2C_READY),
+ chDbgAssert((i2cp->id_state == I2C_STOP) || (i2cp->id_state == I2C_READY),
"i2cStop(), #1",
"invalid state");
i2c_lld_stop(i2cp);
- i2cp->i2c_state = I2C_STOP;
+ i2cp->id_state = I2C_STOP;
chSysUnlock();
}
/**
- * @brief Initiates a master bus transaction.
- * @details This function sends a start bit followed by an one or two bytes
- * header.
+ * @brief Sends data ever the I2C bus.
*
- * @param[in] i2cp pointer to the @p I2CDriver object
- * @param[in] header transaction header
- * @param[in] callback operation complete callback
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] i2cscfg pointer to the @p I2C slave config
*
- * @iclass
*/
-void i2cMasterStartI(I2CDriver *i2cp,
- uint16_t header,
- i2ccallback_t callback) {
+void i2cMasterTransmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg) {
+
+ size_t n;
+ i2cblock_t *txbuf;
+ uint8_t nbit_addr;
+
+ txbuf = i2cscfg->txbuf;
+ nbit_addr = i2cscfg->nbit_address;
+ n = i2cscfg->txbytes;
+
+ chDbgCheck((i2cp != NULL) && (i2cscfg != NULL) && \
+ ((nbit_addr == 7) || (nbit_addr == 10)) && (n > 0) && (txbuf != NULL),
+ "i2cMasterTransmit");
+
+ // init slave config field in driver
+ i2cp->id_slave_config = i2cscfg;
- chDbgCheck((i2cp != NULL) && (callback != NULL), "i2cMasterStartI");
- chDbgAssert(i2cp->i2c_state == I2C_READY,
- "i2cMasterStartI(), #1", "invalid state");
+#if I2C_USE_WAIT
+ i2c_lld_wait_bus_free(i2cp);
+ if(i2c_lld_bus_is_busy(i2cp)) {
+#ifdef PRINTTRACE
+ print("I2C Bus busy!\n");
+#endif
+ return;
+ };
+#endif
- i2cp->id_callback = callback;
- i2c_lld_master_start(i2cp, header);
+ chSysLock();
+ chDbgAssert(i2cp->id_state == I2C_READY,
+ "i2cMasterTransmit(), #1", "not ready");
+
+ i2cp->id_state = I2C_ACTIVE;
+ i2c_lld_master_transmit(i2cp);
+ _i2c_wait_s(i2cp);
+#if !I2C_USE_WAIT
+ i2c_lld_wait_bus_free(i2cp);
+#endif
+ if (i2cp->id_state == I2C_COMPLETE)
+ i2cp->id_state = I2C_READY;
+ chSysUnlock();
}
/**
- * @brief Terminates a master bus transaction.
+ * @brief Receives data from the I2C bus.
*
- * @param[in] i2cp pointer to the @p I2CDriver object
- * @param[in] callback operation complete callback
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] i2cscfg pointer to the @p I2C slave config
*
- * @iclass
*/
-void i2cMasterStopI(I2CDriver *i2cp, i2ccallback_t callback) {
+void i2cMasterReceive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg){
- chDbgCheck((i2cp != NULL) && (callback != NULL), "i2cMasterStopI");
- chDbgAssert(i2cp->i2c_state == I2C_MREADY,
- "i2cMasterStopI(), #1", "invalid state");
+ size_t n;
+ i2cblock_t *rxbuf;
+ uint8_t nbit_addr;
- i2cp->id_callback = callback;
- i2c_lld_master_stop(i2cp);
-}
+ rxbuf = i2cscfg->rxbuf;
+ n = i2cscfg->rxbytes;
+ nbit_addr = i2cscfg->nbit_address;
+ chDbgCheck((i2cp != NULL) && (i2cscfg != NULL) && (n > 0) && \
+ ((nbit_addr == 7) || (nbit_addr == 10)) && (rxbuf != NULL),
+ "i2cMasterReceive");
+
+ // init slave config field in driver
+ i2cp->id_slave_config = i2cscfg;
+
+#if I2C_USE_WAIT
+ i2c_lld_wait_bus_free(i2cp);
+ if(i2c_lld_bus_is_busy(i2cp)) {
+#ifdef PRINTTRACE
+ print("I2C Bus busy!\n");
+#endif
+ return;
+ };
+#endif
+
+ chSysLock();
+ chDbgAssert(i2cp->id_state == I2C_READY,
+ "i2cMasterReceive(), #1", "not ready");
+
+ i2cp->id_state = I2C_ACTIVE;
+ i2c_lld_master_receive(i2cp);
+ _i2c_wait_s(i2cp);
+#if !I2C_USE_WAIT
+ i2c_lld_wait_bus_free(i2cp);
+#endif
+ if (i2cp->id_state == I2C_COMPLETE)
+ i2cp->id_state = I2C_READY;
+ chSysUnlock();
+}
-/**
- * @brief Sends a restart bit.
- * @details Restart bits are required by some types of I2C transactions.
- *
- * @param[in] i2cp pointer to the @p I2CDriver object
- * @param[in] callback operation complete callback
- *
- * @iclass
- */
-void i2cMasterRestartI(I2CDriver *i2cp, i2ccallback_t callback) {
- chDbgCheck((i2cp != NULL) && (callback != NULL), "i2cMasterRestartI");
- chDbgAssert(i2cp->i2c_state == I2C_MREADY,
- "i2cMasterRestartI(), #1", "invalid state");
+uint16_t i2cSMBusAlertResponse(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg) {
- i2cp->id_callback = callback;
- i2c_lld_master_restart(i2cp);
+ i2cMasterReceive(i2cp, i2cscfg);
+ return i2cp->id_slave_config->slave_addr;
}
+
/**
- * @brief Master transmission.
+ * @brief Handles communication events/errors.
+ * @details Must be called from the I/O interrupt service routine in order to
+ * notify I/O conditions as errors, signals change etc.
*
- * @param[in] i2cp pointer to the @p I2CDriver object
- * @param[in] n number of bytes to be transmitted
- * @param[in] txbuf transmit data buffer pointer
- * @param[in] callback operation complete callback
+ * @param[in] i2cp pointer to a @p I2CDriver structure
+ * @param[in] mask condition flags to be added to the mask
*
* @iclass
*/
-void i2cMasterTransmitI(I2CDriver *i2cp, size_t n, const uint8_t *txbuf,
- i2ccallback_t callback) {
+void i2cAddFlagsI(I2CDriver *i2cp, i2cflags_t mask) {
- chDbgCheck((i2cp != NULL) && (n > 0) &&
- (txbuf != NULL) && (callback != NULL), "i2cMasterTransmitI");
- chDbgAssert(i2cp->i2c_state == I2C_MREADY,
- "i2cMasterTransmitI(), #1", "invalid state");
+ chDbgCheck(i2cp != NULL, "i2cAddFlagsI");
- i2cp->id_callback = callback;
- i2c_lld_master_transmit(i2cp, n, txbuf);
+ i2cp->id_slave_config->errors |= mask;
+ chEvtBroadcastI(&i2cp->id_slave_config->sevent);
}
/**
- * @brief Master receive.
+ * @brief Returns and clears the errors mask associated to the driver.
*
- * @param[in] i2cp pointer to the @p I2CDriver object
- * @param[in] n number of bytes to be transmitted
- * @param[in] rxbuf receive data buffer pointer
- * @param[in] callback operation complete callback
+ * @param[in] i2cp pointer to a @p I2CDriver structure
+ * @return The condition flags modified since last time this
+ * function was invoked.
*
- * @iclass
+ * @api
*/
-void i2cMasterReceiveI(I2CDriver *i2cp, size_t n, uint8_t *rxbuf,
- i2ccallback_t callback) {
+i2cflags_t i2cGetAndClearFlags(I2CDriver *i2cp) {
+ i2cflags_t mask;
- chDbgCheck((i2cp != NULL) && (n > 0) &&
- (rxbuf != NULL) && (callback != NULL), "i2cMasterReceiveI");
- chDbgAssert(i2cp->i2c_state == I2C_MREADY,
- "i2cMasterReceiveI(), #1", "invalid state");
+ chDbgCheck(i2cp != NULL, "i2cGetAndClearFlags");
- i2cp->id_callback = callback;
- i2c_lld_master_receive(i2cp, n, rxbuf);
+ chSysLock();
+ mask = i2cp->id_slave_config->errors;
+ i2cp->id_slave_config->errors = I2CD_NO_ERROR;
+ chSysUnlock();
+ return mask;
}
+
+
#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
/**
- * @brief Gains exclusive access to the I2C bus.
+ * @brief Gains exclusive access to the I2C bus.
* @details This function tries to gain ownership to the I2C bus, if the bus
* is already being used then the invoking thread is queued.
- * @pre In order to use this function the option @p I2C_USE_MUTUAL_EXCLUSION
- * must be enabled.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
- * @api
- *
+ * @note This function is only available when the @p I2C_USE_MUTUAL_EXCLUSION
+ * option is set to @p TRUE.
*/
void i2cAcquireBus(I2CDriver *i2cp) {
chDbgCheck(i2cp != NULL, "i2cAcquireBus");
#if CH_USE_MUTEXES
- chMtxLock(&i2cp->id_mutex);
+ chMtxLock(&i2cp->mutex);
#elif CH_USE_SEMAPHORES
chSemWait(&i2cp->id_semaphore);
#endif
}
/**
- * @brief Releases exclusive access to the I2C bus.
- * @pre In order to use this function the option @p I2C_USE_MUTUAL_EXCLUSION
- * must be enabled.
+ * @brief Releases exclusive access to the I2C bus.
*
* @param[in] i2cp pointer to the @p I2CDriver object
*
- * @api
+ * @note This function is only available when the @p I2C_USE_MUTUAL_EXCLUSION
+ * option is set to @p TRUE.
*/
void i2cReleaseBus(I2CDriver *i2cp) {
diff --git a/os/hal/src/i2c_albi.c b/os/hal/src/i2c_albi.c
new file mode 100644
index 000000000..64bed78eb
--- /dev/null
+++ b/os/hal/src/i2c_albi.c
@@ -0,0 +1,268 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/**
+ * @brief I2C Driver initialization.
+ */
+void i2cInit(void) {
+
+ i2c_lld_init();
+}
+
+/**
+ * @brief Initializes the standard part of a @p I2CDriver structure.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2cObjectInit(I2CDriver *i2cp) {
+ chEvtInit(&i2cp->sevent);
+ i2cp->errors = I2CD_NO_ERROR;
+ i2cp->state = I2C_STOP;
+// i2cp->i2cd_config = NULL;
+#if I2C_USE_WAIT
+ i2cp->thread = NULL;
+#endif /* I2C_USE_WAIT */
+#if I2C_USE_MUTUAL_EXCLUSION
+#if CH_USE_MUTEXES
+ chMtxInit(&i2cp->mutex);
+#elif CH_USE_SEMAPHORES
+ chSemInit(&i2cp->semaphore, 1);
+#endif
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+#if defined(I2C_DRIVER_EXT_INIT_HOOK)
+ I2C_DRIVER_EXT_INIT_HOOK(i2cp);
+#endif
+}
+
+/**
+ * @brief Configures and activates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] config pointer to the @p I2CConfig object
+ */
+void i2cStart(I2CDriver *i2cp, const I2CConfig *config) {
+
+ chDbgCheck((i2cp != NULL) && (config != NULL), "i2cStart");
+
+ chSysLock();
+ chDbgAssert((i2cp->state == I2C_STOP)||(i2cp->state == I2C_READY),
+ "i2cStart(), #1", "invalid state");
+
+ i2cp->nbit_address = config->nBitAddress;
+ i2c_lld_start(i2cp);
+ i2c_lld_set_clock(i2cp, config->ClockSpeed, config->FastModeDutyCycle);
+ i2c_lld_set_opmode(i2cp, config->opMode);
+ i2c_lld_set_own_address(i2cp, config->OwnAddress1, config->nBitAddress);
+ i2cp->state = I2C_READY;
+ chSysUnlock();
+}
+
+/**
+ * @brief Deactivates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2cStop(I2CDriver *i2cp) {
+
+ chDbgCheck(i2cp != NULL, "i2cStop");
+
+ chSysLock();
+ chDbgAssert((i2cp->state == I2C_STOP) || (i2cp->state == I2C_READY),
+ "i2cStop(), #1", "invalid state");
+ i2c_lld_stop(i2cp);
+ i2cp->state = I2C_STOP;
+ chSysUnlock();
+}
+
+/**
+ * @brief Sends data ever the I2C bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] slave_addr 7-bit or 10-bit address of the slave
+ * @param[in] n number of words to send
+ * @param[in] txbuf the pointer to the transmit buffer
+ *
+ */
+void i2cMasterTransmit(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *txbuf) {
+
+ chDbgCheck((i2cp != NULL) && (n > 0) && (txbuf != NULL),
+ "i2cMasterTransmit");
+
+#if I2C_USE_WAIT
+ i2c_lld_wait_bus_free(i2cp);
+ if(i2c_lld_bus_is_busy(i2cp)) {
+#ifdef PRINTTRACE
+ print("I2C Bus busy!\n");
+#endif
+ return;
+ };
+#endif
+
+ chSysLock();
+ chDbgAssert(i2cp->state == I2C_READY,
+ "i2cMasterTransmit(), #1", "not ready");
+
+ i2cp->state = I2C_ACTIVE;
+ i2c_lld_master_transmit(i2cp, slave_addr, n, txbuf);
+ _i2c_wait_s(i2cp);
+#if !I2C_USE_WAIT
+ i2c_lld_wait_bus_free(i2cp);
+#endif
+ if (i2cp->state == I2C_COMPLETE)
+ i2cp->state = I2C_READY;
+ chSysUnlock();
+}
+
+/**
+ * @brief Receives data from the I2C bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] slave_addr 7-bit or 10-bit address of the slave
+ * @param[in] n number of bytes to receive
+ * @param[out] rxbuf the pointer to the receive buffer
+ *
+ */
+void i2cMasterReceive(I2CDriver *i2cp, uint16_t slave_addr, size_t n, void *rxbuf) {
+
+ chDbgCheck((i2cp != NULL) && (n > 0) && (rxbuf != NULL),
+ "i2cMasterReceive");
+
+#if I2C_USE_WAIT
+ i2c_lld_wait_bus_free(i2cp);
+ if(i2c_lld_bus_is_busy(i2cp)) {
+#ifdef PRINTTRACE
+ print("I2C Bus busy!\n");
+#endif
+ return;
+ };
+#endif
+
+ chSysLock();
+ chDbgAssert(i2cp->state == I2C_READY,
+ "i2cMasterReceive(), #1", "not ready");
+
+ i2cp->state = I2C_ACTIVE;
+ i2c_lld_master_receive(i2cp, slave_addr, n, rxbuf);
+ _i2c_wait_s(i2cp);
+#if !I2C_USE_WAIT
+ i2c_lld_wait_bus_free(i2cp);
+#endif
+ if (i2cp->state == I2C_COMPLETE)
+ i2cp->state = I2C_READY;
+ chSysUnlock();
+}
+
+uint16_t i2cSMBusAlertResponse(I2CDriver *i2cp) {
+ uint16_t slv_addr;
+
+ i2cMasterReceive(i2cp, 0x0C, 2, &slv_addr);
+ return slv_addr;
+}
+
+
+/**
+ * @brief Handles communication events/errors.
+ * @details Must be called from the I/O interrupt service routine in order to
+ * notify I/O conditions as errors, signals change etc.
+ *
+ * @param[in] i2cp pointer to a @p I2CDriver structure
+ * @param[in] mask condition flags to be added to the mask
+ *
+ * @iclass
+ */
+void i2cAddFlagsI(I2CDriver *i2cp, i2cflags_t mask) {
+
+ chDbgCheck(i2cp != NULL, "i2cAddFlagsI");
+
+ i2cp->errors |= mask;
+ chEvtBroadcastI(&i2cp->sevent);
+}
+
+/**
+ * @brief Returns and clears the errors mask associated to the driver.
+ *
+ * @param[in] i2cp pointer to a @p I2CDriver structure
+ * @return The condition flags modified since last time this
+ * function was invoked.
+ *
+ * @api
+ */
+i2cflags_t i2cGetAndClearFlags(I2CDriver *i2cp) {
+ i2cflags_t mask;
+
+ chDbgCheck(i2cp != NULL, "i2cGetAndClearFlags");
+
+ chSysLock();
+ mask = i2cp->errors;
+ i2cp->errors = I2CD_NO_ERROR;
+ chSysUnlock();
+ return mask;
+}
+
+
+
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+/**
+ * @brief Gains exclusive access to the I2C bus.
+ * @details This function tries to gain ownership to the I2C bus, if the bus
+ * is already being used then the invoking thread is queued.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @note This function is only available when the @p I2C_USE_MUTUAL_EXCLUSION
+ * option is set to @p TRUE.
+ */
+void i2cAcquireBus(I2CDriver *i2cp) {
+
+ chDbgCheck(i2cp != NULL, "i2cAcquireBus");
+
+#if CH_USE_MUTEXES
+ chMtxLock(&i2cp->mutex);
+#elif CH_USE_SEMAPHORES
+ chSemWait(&i2cp->semaphore);
+#endif
+}
+
+/**
+ * @brief Releases exclusive access to the I2C bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @note This function is only available when the @p I2C_USE_MUTUAL_EXCLUSION
+ * option is set to @p TRUE.
+ */
+void i2cReleaseBus(I2CDriver *i2cp) {
+
+ chDbgCheck(i2cp != NULL, "i2cReleaseBus");
+
+#if CH_USE_MUTEXES
+ (void)i2cp;
+ chMtxUnlock();
+#elif CH_USE_SEMAPHORES
+ chSemSignal(&i2cp->semaphore);
+#endif
+}
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+
+#endif /* CH_HAL_USE_I2C */
diff --git a/os/hal/src/i2c_brts.c b/os/hal/src/i2c_brts.c
new file mode 100644
index 000000000..ad9a5d0ac
--- /dev/null
+++ b/os/hal/src/i2c_brts.c
@@ -0,0 +1,249 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file i2c.c
+ * @brief I2C Driver code.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief I2C Driver initialization.
+ * @note This function is implicitly invoked by @p halInit(), there is
+ * no need to explicitly initialize the driver.
+ *
+ * @init
+ */
+void i2cInit(void) {
+ i2c_lld_init();
+}
+
+/**
+ * @brief Initializes the standard part of a @p I2CDriver structure.
+ *
+ * @param[out] i2cp pointer to the @p I2CDriver object
+ *
+ * @init
+ */
+void i2cObjectInit(I2CDriver *i2cp) {
+
+ i2cp->id_state = I2C_STOP;
+ i2cp->id_config = NULL;
+ i2cp->id_slave_config = NULL;
+
+#if I2C_USE_WAIT
+ i2cp->id_thread = NULL;
+#endif /* I2C_USE_WAIT */
+
+#if I2C_USE_MUTUAL_EXCLUSION
+#if CH_USE_MUTEXES
+ chMtxInit(&i2cp->id_mutex);
+#else
+ chSemInit(&i2cp->id_semaphore, 1);
+#endif /* CH_USE_MUTEXES */
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+
+#if defined(I2C_DRIVER_EXT_INIT_HOOK)
+ I2C_DRIVER_EXT_INIT_HOOK(i2cp);
+#endif
+}
+
+/**
+ * @brief Configures and activates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] config pointer to the @p I2CConfig object
+ *
+ * @api
+ */
+void i2cStart(I2CDriver *i2cp, I2CConfig *config) {
+
+ chDbgCheck((i2cp != NULL) && (config != NULL), "i2cStart");
+
+ chSysLock();
+ chDbgAssert((i2cp->id_state == I2C_STOP) || (i2cp->id_state == I2C_READY),
+ "i2cStart(), #1",
+ "invalid state");
+ i2cp->id_config = config;
+ i2c_lld_start(i2cp);
+ i2cp->id_state = I2C_READY;
+ chSysUnlock();
+}
+
+/**
+ * @brief Deactivates the I2C peripheral.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @api
+ */
+void i2cStop(I2CDriver *i2cp) {
+
+ chDbgCheck(i2cp != NULL, "i2cStop");
+
+ chSysLock();
+ chDbgAssert((i2cp->id_state == I2C_STOP) || (i2cp->id_state == I2C_READY),
+ "i2cStop(), #1",
+ "invalid state");
+ i2c_lld_stop(i2cp);
+ i2cp->id_state = I2C_STOP;
+ chSysUnlock();
+}
+
+/**
+ * @brief Generate (re)start on the bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2cMasterStart(I2CDriver *i2cp){
+
+ chDbgCheck((i2cp != NULL), "i2cMasterTransmit");
+
+ chSysLock();
+ i2c_lld_master_start(i2cp);
+ chSysUnlock();
+}
+
+/**
+ * @brief Generate stop on the bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ */
+void i2cMasterStop(I2CDriver *i2cp){
+
+ chDbgCheck((i2cp != NULL), "i2cMasterTransmit");
+ chSysLock();
+ i2c_lld_master_stop(i2cp);
+ chSysUnlock();
+}
+
+/**
+ * @brief Sends data ever the I2C bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object
+ *
+ */
+void i2cMasterTransmit(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg) {
+
+ chDbgCheck((i2cp != NULL) && (i2cscfg != NULL),
+ "i2cMasterTransmit");
+ chDbgAssert(i2cp->id_state == I2C_READY,
+ "i2cMasterTransmit(), #1",
+ "not active");
+
+ chSysLock();
+ i2c_lld_master_transmit(i2cp, i2cscfg);
+ chSysUnlock();
+}
+
+
+/**
+ * @brief Receives data from the I2C bus.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ * @param[in] i2cscfg pointer to the @p I2CSlaveConfig object
+ */
+void i2cMasterReceive(I2CDriver *i2cp, I2CSlaveConfig *i2cscfg) {
+
+ chDbgCheck((i2cp != NULL) && (i2cscfg != NULL),
+ "i2cMasterReceive");
+ chDbgAssert(i2cp->id_state == I2C_READY,
+ "i2cMasterReceive(), #1",
+ "not active");
+
+ chSysLock();
+ i2c_lld_master_receive(i2cp, i2cscfg);
+ chSysUnlock();
+}
+
+
+
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+/**
+ * @brief Gains exclusive access to the I2C bus.
+ * @details This function tries to gain ownership to the I2C bus, if the bus
+ * is already being used then the invoking thread is queued.
+ * @pre In order to use this function the option @p I2C_USE_MUTUAL_EXCLUSION
+ * must be enabled.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @api
+ *
+ */
+void i2cAcquireBus(I2CDriver *i2cp) {
+
+ chDbgCheck(i2cp != NULL, "i2cAcquireBus");
+
+#if CH_USE_MUTEXES
+ chMtxLock(&i2cp->id_mutex);
+#elif CH_USE_SEMAPHORES
+ chSemWait(&i2cp->id_semaphore);
+#endif
+}
+
+/**
+ * @brief Releases exclusive access to the I2C bus.
+ * @pre In order to use this function the option @p I2C_USE_MUTUAL_EXCLUSION
+ * must be enabled.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @api
+ */
+void i2cReleaseBus(I2CDriver *i2cp) {
+
+ chDbgCheck(i2cp != NULL, "i2cReleaseBus");
+
+#if CH_USE_MUTEXES
+ (void)i2cp;
+ chMtxUnlock();
+#elif CH_USE_SEMAPHORES
+ chSemSignal(&i2cp->id_semaphore);
+#endif
+}
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+
+#endif /* HAL_USE_I2C */
+
+/** @} */
generated by cgit v1.2.3 (git 2.25.1) at 2025-05-03 01:14:03 +0000