1 files changed, 0 insertions, 25 deletions
diff --git a/testhal/AVR/SPI/readme.txt b/testhal/AVR/SPI/readme.txt
deleted file mode 100644
index 399cc230a..000000000
--- a/testhal/AVR/SPI/readme.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-*****************************************************************************
-** ChibiOS/RT port for Atmel AVR ATmega1280.                                **
-*****************************************************************************
-
-** TARGET **
-
-The demo runs on an Arduino board.
-
-** The Demo **
-
-Connect the SPI interfaces of two Arduino boards. Configure one as master, the other
-as slave using the #define statement in main.c. 
-
-Once the master starts running, the two boards will exchange messages using SPI 
-and output the messages over the USB serial port.
- 
-** Build Procedure **
-
-The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
-
-** Notes **
-
-This demo can be programmed onto the Arduino while leaving the Arduino bootloader
-in place. This means that the programming can be done through the USB connector
-as well.