diff options
Diffstat (limited to 'testhal/LPC11xx/EXT/mcuconf.h')
-rw-r--r-- | testhal/LPC11xx/EXT/mcuconf.h | 106 |
1 files changed, 106 insertions, 0 deletions
diff --git a/testhal/LPC11xx/EXT/mcuconf.h b/testhal/LPC11xx/EXT/mcuconf.h new file mode 100644 index 000000000..b5493dbb7 --- /dev/null +++ b/testhal/LPC11xx/EXT/mcuconf.h @@ -0,0 +1,106 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+ LPC11xx EXT driver - Copyright (C) 2013 Marcin Jokel
+ - Copyright (C) 2013 mike brown
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * LPC1114 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the driver
+ * is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0 Lowest...highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define LPC11xx_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC
+#define LPC11xx_SYSPLL_MUL 4
+#define LPC11xx_SYSPLL_DIV 4
+#define LPC11xx_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT
+#define LPC11xx_SYSABHCLK_DIV 1
+
+/*
+ * GPT driver system settings.
+ */
+#define LPC11xx_GPT_USE_CT16B0 FALSE
+#define LPC11xx_GPT_USE_CT16B1 FALSE
+#define LPC11xx_GPT_USE_CT32B0 FALSE
+#define LPC11xx_GPT_USE_CT32B1 FALSE
+#define LPC11xx_GPT_CT16B0_IRQ_PRIORITY 1
+#define LPC11xx_GPT_CT16B1_IRQ_PRIORITY 3
+#define LPC11xx_GPT_CT32B0_IRQ_PRIORITY 2
+#define LPC11xx_GPT_CT32B1_IRQ_PRIORITY 2
+
+/*
+ * SERIAL driver system settings.
+ */
+#define LPC11xx_SERIAL_USE_UART0 TRUE
+#define LPC11xx_SERIAL_FIFO_PRELOAD 16
+#define LPC11xx_SERIAL_UART0CLKDIV 1
+#define LPC11xx_SERIAL_UART0_IRQ_PRIORITY 3
+
+/*
+ * SPI driver system settings.
+ */
+#define LPC11xx_SPI_USE_SSP0 TRUE
+#define LPC11xx_SPI_USE_SSP1 FALSE
+#define LPC11xx_SPI_SSP0CLKDIV 1
+#define LPC11xx_SPI_SSP1CLKDIV 1
+#define LPC11xx_SPI_SSP0_IRQ_PRIORITY 1
+#define LPC11xx_SPI_SSP1_IRQ_PRIORITY 1
+#define LPC11xx_SPI_SSP_ERROR_HOOK(spip) chSysHalt()
+#define LPC11xx_SPI_SCK0_SELECTOR SCK0_IS_PIO2_11
+
+/*
+ * EXT driver system settings.
+ */
+#define LPC11xx_EXT_USE_EXT0 TRUE
+#define LPC11xx_EXT_USE_EXT1 FALSE
+#define LPC11xx_EXT_USE_EXT2 FALSE
+#define LPC11xx_EXT_USE_EXT3 FALSE
+#define LPC11xx_EXT_EXTI0_IRQ_PRIORITY 3
+#define LPC11xx_EXT_EXTI1_IRQ_PRIORITY 3
+#define LPC11xx_EXT_EXTI2_IRQ_PRIORITY 3
+#define LPC11xx_EXT_EXTI3_IRQ_PRIORITY 3
+
+/*
+ * I2C driver system settings.
+ */
+#define LPC11xx_I2C_IRQ_PRIORITY 3
+
+/*
+ * PWM driver system settings.
+ */
+#define LPC11xx_PWM_USE_CT16B0 FALSE
+#define LPC11xx_PWM_USE_CT16B1 TRUE
+#define LPC11xx_PWM_USE_CT32B0 FALSE
+#define LPC11xx_PWM_USE_CT32B1 FALSE
+#define LPC11xx_PWM_USE_CT16B0_CH0 FALSE
+#define LPC11xx_PWM_USE_CT16B0_CH1 FALSE
+#define LPC11xx_PWM_USE_CT16B1_CH0 TRUE
+#define LPC11xx_PWM_USE_CT16B1_CH1 TRUE
+#define LPC11xx_PWM_USE_CT32B0_CH0 FALSE
+#define LPC11xx_PWM_USE_CT32B0_CH1 FALSE
+#define LPC11xx_PWM_USE_CT32B1_CH0 FALSE
+#define LPC11xx_PWM_USE_CT32B1_CH1 FALSE
+#define LPC11xx_PWM_CT16B0_IRQ_PRIORITY 3
+#define LPC11xx_PWM_CT16B1_IRQ_PRIORITY 3
+#define LPC11xx_PWM_CT32B0_IRQ_PRIORITY 3
+#define LPC11xx_PWM_CT32B1_IRQ_PRIORITY 3
|