1 files changed, 142 insertions, 0 deletions
diff --git a/testhal/SPC56ELxx/PWM-ICU/main.c b/testhal/SPC56ELxx/PWM-ICU/main.c
new file mode 100644
index 000000000..ba6b1ad7f
--- /dev/null
+++ b/testhal/SPC56ELxx/PWM-ICU/main.c
@@ -0,0 +1,142 @@
+/*
+ * Licensed under ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ *        http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software 
+ * distributed under the License is distributed on an "AS IS" BASIS, 
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/* Inclusion of the main header files of all the imported components in the
+   order specified in the application wizard. The file is generated
+   automatically.*/
+#include "components.h"
+
+#include "shellcmd.h"
+
+static void pwmpcb(PWMDriver *pwmp) {
+
+  (void)pwmp;
+  palClearPad(PORT_D, PD_LED1);
+}
+
+static void pwmc1cb(PWMDriver *pwmp) {
+
+  (void)pwmp;
+  palSetPad(PORT_D, PD_LED1);
+}
+
+static PWMConfig pwmcfg = {
+  250000,                                   /* 250kHz PWM clock frequency.*/
+  50000,                                    /* Initial PWM period 0.2s.*/
+  pwmpcb,
+  {
+   {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb},
+   {PWM_OUTPUT_DISABLED, NULL}
+  },
+  EDGE_ALIGNED_PWM
+};
+
+icucnt_t last_width, last_period;
+
+static void icuwidthcb(ICUDriver *icup) {
+
+  palSetPad(PORT_D, PD_LED2);
+  last_width = icuGetWidth(icup);
+}
+
+static void icuperiodcb(ICUDriver *icup) {
+
+  palClearPad(PORT_D, PD_LED2);
+  last_period = icuGetPeriod(icup);
+}
+
+static ICUConfig icucfg = {
+  ICU_INPUT_ACTIVE_HIGH,
+  250000,                                    /* 250kHz ICU clock frequency.*/
+  icuwidthcb,
+  icuperiodcb,
+  NULL,
+  ICU_CHANNEL_1
+};
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+  /*
+   * Initializes the PWM driver 1 and ICU driver 1.
+   * GPIOD10 is the PWM output.
+   * GPIOA0 is the ICU input.
+   * The two pins have to be externally connected together.
+   */
+  icuStart(&ICUD1, &icucfg);
+  icuEnable(&ICUD1);
+
+  /* Sets A0 alternative function.*/
+  SIU.PCR[0].R = 0b0100010100000100;
+
+  pwmStart(&PWMD1, &pwmcfg);
+  /* Sets D10 alternative function.*/
+  SIU.PCR[58].R = 0b0100010100000100;
+
+  chThdSleepMilliseconds(2000);
+
+  /*
+   * Starts the PWM channel 0 using 75% duty cycle.
+   */
+  pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 7500));
+  chThdSleepMilliseconds(5000);
+
+  /*
+   * Changes the PWM channel 0 to 50% duty cycle.
+   */
+  pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000));
+  chThdSleepMilliseconds(5000);
+
+  /*
+   * Changes the PWM channel 0 to 25% duty cycle.
+   */
+  pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 2500));
+  chThdSleepMilliseconds(5000);
+
+  /*
+   * Changes PWM period and the PWM channel 0 to 50% duty cycle.
+   */
+  pwmChangePeriod(&PWMD1, 25000);
+  pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000));
+  chThdSleepMilliseconds(5000);
+
+  /*
+   * Disables channel 0 and stops the drivers.
+   */
+  pwmDisableChannel(&PWMD1, 0);
+  pwmStop(&PWMD1);
+  icuDisable(&ICUD1);
+  icuStop(&ICUD1);
+  palClearPad(PORT_D, PD_LED3);
+  palClearPad(PORT_D, PD_LED4);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing.
+   */
+  while (TRUE) {
+    chThdSleepMilliseconds(500);
+  }
+  return 0;
+}